Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Fill holes in hypervisor APIs and fix KTSB registry.
  [SPARC64]: Fix two bugs wrt. kernel 4MB TSB.
  [SPARC]: Mark as emulating cmpxchg, add appropriate depends for DRM.
  [SPARC]: Emulate cmpxchg like parisc
  [SPARC64]: Fix _PAGE_EXEC_4U check in sun4u I-TLB miss handler.
  [SPARC]: Linux always started with 9600 8N1
  [SPARC64]: arch/sparc64/time.c doesn't compile on Ultra 1 (no PCI)
  [SPARC64]: Eliminate NR_CPUS limitations.
  [SPARC64]: Use machine description and OBP properly for cpu probing.
  [SPARC64]: Negotiate hypervisor API for PCI services.
  [SPARC64]: Report proper system soft state to the hypervisor.
  [SPARC64]: Fix typo in sun4v_hvapi_register error handling.
  [SCSI] ESP: Kill SCSI_ESP_CORE and link directly just like jazz_esp
  [SCSI] jazz_esp: Converted to use esp_core.
  [SPARC64]: PCI device scan is way too verbose by default.
  [SERIAL] sunzilog: section mismatch fix
  [SPARC32]: Removes mismatch section warnigs in sparc time.c file
  [SPARC64]: Don't be picky about virtual-dma values on sun4v.
  [SPARC64]: Kill unused DIE_PAGE_FAULT enum value.
  [SCSI] pluto: Use wait_for_completion_timeout.

7 files changed, 195 insertions, 283 deletions

diff --git a/drivers/char/drm/Kconfig b/drivers/char/drm/Kconfig
index ef833a1c27eb..0b7ffa5191c6 100644
--- a/drivers/char/drm/Kconfig
+++ b/drivers/char/drm/Kconfig
@@ -6,7 +6,7 @@
 #
 config DRM
 	tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
-	depends on (AGP || AGP=n) && PCI
+	depends on (AGP || AGP=n) && PCI && !EMULATED_CMPXCHG
 	help
 	  Kernel-level support for the Direct Rendering Infrastructure (DRI)
 	  introduced in XFree86 4.0. If you say Y here, you need to select
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index d28c14e23c32..572034ceb143 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1753,23 +1753,9 @@ config SUN3X_ESP
 	  The ESP was an on-board SCSI controller used on Sun 3/80
 	  machines.  Say Y here to compile in support for it.
 
-config SCSI_ESP_CORE
-	tristate "ESP Scsi Driver Core"
-	depends on SCSI
-	select SCSI_SPI_ATTRS
-	help
-	  This is a core driver for NCR53c9x based scsi chipsets,
-	  also known as "ESP" for Emulex Scsi Processor or
-	  Enhanced Scsi Processor.  This driver does not exist by
-	  itself, there are front-end drivers which, when enabled,
-	  select and enable this driver.  One example is SCSI_SUNESP.
-	  These front-end drivers provide probing, DMA, and register
-	  access support for the core driver.
-
 config SCSI_SUNESP
 	tristate "Sparc ESP Scsi Driver"
 	depends on SBUS && SCSI
-	select SCSI_ESP_CORE
 	help
 	  This is the driver for the Sun ESP SCSI host adapter. The ESP
 	  chipset is present in most SPARC SBUS-based computers.
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 51e884fa10b0..b1b632791580 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -106,8 +106,7 @@ obj-$(CONFIG_MEGARAID_LEGACY)	+= megaraid.o
 obj-$(CONFIG_MEGARAID_NEWGEN)	+= megaraid/
 obj-$(CONFIG_MEGARAID_SAS)	+= megaraid/
 obj-$(CONFIG_SCSI_ACARD)	+= atp870u.o
-obj-$(CONFIG_SCSI_ESP_CORE)	+= esp_scsi.o
-obj-$(CONFIG_SCSI_SUNESP)	+= sun_esp.o
+obj-$(CONFIG_SCSI_SUNESP)	+= esp_scsi.o	sun_esp.o
 obj-$(CONFIG_SCSI_GDTH)		+= gdth.o
 obj-$(CONFIG_SCSI_INITIO)	+= initio.o
 obj-$(CONFIG_SCSI_INIA100)	+= a100u2w.o
@@ -121,7 +120,7 @@ obj-$(CONFIG_BLK_DEV_3W_XXXX_RAID) += 3w-xxxx.o
 obj-$(CONFIG_SCSI_3W_9XXX)	+= 3w-9xxx.o
 obj-$(CONFIG_SCSI_PPA)		+= ppa.o
 obj-$(CONFIG_SCSI_IMM)		+= imm.o
-obj-$(CONFIG_JAZZ_ESP)		+= NCR53C9x.o	jazz_esp.o
+obj-$(CONFIG_JAZZ_ESP)		+= esp_scsi.o	jazz_esp.o
 obj-$(CONFIG_SUN3X_ESP)		+= NCR53C9x.o	sun3x_esp.o
 obj-$(CONFIG_SCSI_FCAL)		+= fcal.o
 obj-$(CONFIG_SCSI_LASI700)	+= 53c700.o lasi700.o
diff --git a/drivers/scsi/jazz_esp.c b/drivers/scsi/jazz_esp.c
index 19dd4b962e18..81e497d9eae0 100644
--- a/drivers/scsi/jazz_esp.c
+++ b/drivers/scsi/jazz_esp.c
@@ -1,307 +1,244 @@
-/*
- * jazz_esp.c: Driver for SCSI chip on Mips Magnum Boards (JAZZ architecture)
+/* jazz_esp.c: ESP front-end for MIPS JAZZ systems.
  *
- * Copyright (C) 1997 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
- *
- * jazz_esp is based on David S. Miller's ESP driver and cyber_esp
+ * Copyright (C) 2007 Thomas Bogendörfer (tsbogend@alpha.frankende)
  */
 
-#include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/delay.h>
 #include <linux/types.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/blkdev.h>
-#include <linux/proc_fs.h>
-#include <linux/stat.h>
-
-#include "scsi.h"
-#include <scsi/scsi_host.h>
-#include "NCR53C9x.h"
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+
 #include <asm/jazz.h>
 #include <asm/jazzdma.h>
-#include <asm/dma.h>
 
-#include <asm/pgtable.h>
-
-static int  dma_bytes_sent(struct NCR_ESP *esp, int fifo_count);
-static int  dma_can_transfer(struct NCR_ESP *esp, struct scsi_cmnd *sp);
-static void dma_dump_state(struct NCR_ESP *esp);
-static void dma_init_read(struct NCR_ESP *esp, __u32 vaddress, int length);
-static void dma_init_write(struct NCR_ESP *esp, __u32 vaddress, int length);
-static void dma_ints_off(struct NCR_ESP *esp);
-static void dma_ints_on(struct NCR_ESP *esp);
-static int  dma_irq_p(struct NCR_ESP *esp);
-static int  dma_ports_p(struct NCR_ESP *esp);
-static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write);
-static void dma_mmu_get_scsi_one (struct NCR_ESP *esp, struct scsi_cmnd *sp);
-static void dma_mmu_get_scsi_sgl (struct NCR_ESP *esp, struct scsi_cmnd *sp);
-static void dma_mmu_release_scsi_one (struct NCR_ESP *esp, struct scsi_cmnd *sp);
-static void dma_mmu_release_scsi_sgl (struct NCR_ESP *esp, struct scsi_cmnd *sp);
-static void dma_advance_sg (struct scsi_cmnd *sp);
-static void dma_led_off(struct NCR_ESP *);
-static void dma_led_on(struct NCR_ESP *);
-
-
-static volatile unsigned char cmd_buffer[16];
-				/* This is where all commands are put
-				 * before they are trasfered to the ESP chip
-				 * via PIO.
-				 */
-
-static int jazz_esp_release(struct Scsi_Host *shost)
-{
-	if (shost->irq)
-		free_irq(shost->irq, NULL);
-	if (shost->dma_channel != 0xff)
-		free_dma(shost->dma_channel);
-	if (shost->io_port && shost->n_io_port)
-		release_region(shost->io_port, shost->n_io_port);
-	scsi_unregister(shost);
-	return 0;
-}
+#include <scsi/scsi_host.h>
 
-/***************************************************************** Detection */
-static int jazz_esp_detect(struct scsi_host_template *tpnt)
-{
-    struct NCR_ESP *esp;
-    struct ConfigDev *esp_dev;
-
-    /*
-     * first assumption it is there:-)
-     */
-    if (1) {
-	esp_dev = NULL;
-	esp = esp_allocate(tpnt, esp_dev, 0);
-	
-	/* Do command transfer with programmed I/O */
-	esp->do_pio_cmds = 1;
-	
-	/* Required functions */
-	esp->dma_bytes_sent = &dma_bytes_sent;
-	esp->dma_can_transfer = &dma_can_transfer;
-	esp->dma_dump_state = &dma_dump_state;
-	esp->dma_init_read = &dma_init_read;
-	esp->dma_init_write = &dma_init_write;
-	esp->dma_ints_off = &dma_ints_off;
-	esp->dma_ints_on = &dma_ints_on;
-	esp->dma_irq_p = &dma_irq_p;
-	esp->dma_ports_p = &dma_ports_p;
-	esp->dma_setup = &dma_setup;
-
-	/* Optional functions */
-	esp->dma_barrier = NULL;
-	esp->dma_drain = NULL;
-	esp->dma_invalidate = NULL;
-	esp->dma_irq_entry = NULL;
-	esp->dma_irq_exit = NULL;
-	esp->dma_poll = NULL;
-	esp->dma_reset = NULL;
-	esp->dma_led_off = &dma_led_off;
-	esp->dma_led_on = &dma_led_on;
-	
-	/* virtual DMA functions */
-	esp->dma_mmu_get_scsi_one = &dma_mmu_get_scsi_one;
-	esp->dma_mmu_get_scsi_sgl = &dma_mmu_get_scsi_sgl;
-	esp->dma_mmu_release_scsi_one = &dma_mmu_release_scsi_one;
-	esp->dma_mmu_release_scsi_sgl = &dma_mmu_release_scsi_sgl;
-	esp->dma_advance_sg = &dma_advance_sg;
-
-
-	/* SCSI chip speed */
-	esp->cfreq = 40000000;
+#include "esp_scsi.h"
 
-	/* 
-	 * we don't give the address of DMA channel, but the number
-	 * of DMA channel, so we can use the jazz DMA functions
-	 * 
-	 */
-	esp->dregs = (void *) JAZZ_SCSI_DMA;
-	
-	/* ESP register base */
-	esp->eregs = (struct ESP_regs *)(JAZZ_SCSI_BASE);
-	
-	/* Set the command buffer */
-	esp->esp_command = (volatile unsigned char *)cmd_buffer;
-	
-	/* get virtual dma address for command buffer */
-	esp->esp_command_dvma = vdma_alloc(CPHYSADDR(cmd_buffer), sizeof (cmd_buffer));
-	
-	esp->irq = JAZZ_SCSI_IRQ;
-	request_irq(JAZZ_SCSI_IRQ, esp_intr, IRQF_DISABLED, "JAZZ SCSI",
-	            esp->ehost);
-
-	/*
-	 * FIXME, look if the scsi id is available from NVRAM
-	 */
-	esp->scsi_id = 7;
-		
-	/* Check for differential SCSI-bus */
-	/* What is this stuff? */
-	esp->diff = 0;
-
-	esp_initialize(esp);
-	
-	printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps,esps_in_use);
-	esps_running = esps_in_use;
-	return esps_in_use;
-    }
-    return 0;
-}
+#define DRV_MODULE_NAME		"jazz_esp"
+#define PFX DRV_MODULE_NAME	": "
+#define DRV_VERSION		"1.000"
+#define DRV_MODULE_RELDATE	"May 19, 2007"
 
-/************************************************************* DMA Functions */
-static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count)
+static void jazz_esp_write8(struct esp *esp, u8 val, unsigned long reg)
 {
-    return fifo_count;
+	*(volatile u8 *)(esp->regs + reg) = val;
 }
 
-static int dma_can_transfer(struct NCR_ESP *esp, struct scsi_cmnd *sp)
+static u8 jazz_esp_read8(struct esp *esp, unsigned long reg)
 {
-    /*
-     * maximum DMA size is 1MB
-     */
-    unsigned long sz = sp->SCp.this_residual;
-    if(sz > 0x100000)
-	sz = 0x100000;
-    return sz;
+	return *(volatile u8 *)(esp->regs + reg);
 }
 
-static void dma_dump_state(struct NCR_ESP *esp)
+static dma_addr_t jazz_esp_map_single(struct esp *esp, void *buf,
+				      size_t sz, int dir)
 {
-    
-    ESPLOG(("esp%d: dma -- enable <%08x> residue <%08x\n",
-	    esp->esp_id, vdma_get_enable((int)esp->dregs), vdma_get_residue((int)esp->dregs)));
+	return dma_map_single(esp->dev, buf, sz, dir);
 }
 
-static void dma_init_read(struct NCR_ESP *esp, __u32 vaddress, int length)
+static int jazz_esp_map_sg(struct esp *esp, struct scatterlist *sg,
+				  int num_sg, int dir)
 {
-    dma_cache_wback_inv ((unsigned long)phys_to_virt(vdma_log2phys(vaddress)), length);
-    vdma_disable ((int)esp->dregs);
-    vdma_set_mode ((int)esp->dregs, DMA_MODE_READ);
-    vdma_set_addr ((int)esp->dregs, vaddress);
-    vdma_set_count ((int)esp->dregs, length);
-    vdma_enable ((int)esp->dregs);
+	return dma_map_sg(esp->dev, sg, num_sg, dir);
 }
 
-static void dma_init_write(struct NCR_ESP *esp, __u32 vaddress, int length)
+static void jazz_esp_unmap_single(struct esp *esp, dma_addr_t addr,
+				  size_t sz, int dir)
 {
-    dma_cache_wback_inv ((unsigned long)phys_to_virt(vdma_log2phys(vaddress)), length);    
-    vdma_disable ((int)esp->dregs);    
-    vdma_set_mode ((int)esp->dregs, DMA_MODE_WRITE);
-    vdma_set_addr ((int)esp->dregs, vaddress);
-    vdma_set_count ((int)esp->dregs, length);
-    vdma_enable ((int)esp->dregs);    
+	dma_unmap_single(esp->dev, addr, sz, dir);
 }
 
-static void dma_ints_off(struct NCR_ESP *esp)
+static void jazz_esp_unmap_sg(struct esp *esp, struct scatterlist *sg,
+			      int num_sg, int dir)
 {
-    disable_irq(esp->irq);
+	dma_unmap_sg(esp->dev, sg, num_sg, dir);
 }
 
-static void dma_ints_on(struct NCR_ESP *esp)
+static int jazz_esp_irq_pending(struct esp *esp)
 {
-    enable_irq(esp->irq);
+	if (jazz_esp_read8(esp, ESP_STATUS) & ESP_STAT_INTR)
+		return 1;
+	return 0;
 }
 
-static int dma_irq_p(struct NCR_ESP *esp)
+static void jazz_esp_reset_dma(struct esp *esp)
 {
-    return (esp_read(esp->eregs->esp_status) & ESP_STAT_INTR);
+	vdma_disable ((int)esp->dma_regs);
 }
 
-static int dma_ports_p(struct NCR_ESP *esp)
+static void jazz_esp_dma_drain(struct esp *esp)
 {
-    int enable = vdma_get_enable((int)esp->dregs);
-    
-    return (enable & R4030_CHNL_ENABLE);
+	/* nothing to do */
 }
 
-static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write)
+static void jazz_esp_dma_invalidate(struct esp *esp)
 {
-    /* 
-     * On the Sparc, DMA_ST_WRITE means "move data from device to memory"
-     * so when (write) is true, it actually means READ!
-     */
-    if(write){
-	dma_init_read(esp, addr, count);
-    } else {
-	dma_init_write(esp, addr, count);
-    }
+	vdma_disable ((int)esp->dma_regs);
 }
 
-static void dma_mmu_get_scsi_one (struct NCR_ESP *esp, struct scsi_cmnd *sp)
+static void jazz_esp_send_dma_cmd(struct esp *esp, u32 addr, u32 esp_count,
+				  u32 dma_count, int write, u8 cmd)
 {
-    sp->SCp.have_data_in = vdma_alloc(CPHYSADDR(sp->SCp.buffer), sp->SCp.this_residual);
-    sp->SCp.ptr = (char *)((unsigned long)sp->SCp.have_data_in);
+	BUG_ON(!(cmd & ESP_CMD_DMA));
+
+	jazz_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW);
+	jazz_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED);
+	vdma_disable ((int)esp->dma_regs);
+	if (write)
+		vdma_set_mode ((int)esp->dma_regs, DMA_MODE_READ);
+	else
+		vdma_set_mode ((int)esp->dma_regs, DMA_MODE_WRITE);
+
+	vdma_set_addr ((int)esp->dma_regs, addr);
+	vdma_set_count ((int)esp->dma_regs, dma_count);
+	vdma_enable ((int)esp->dma_regs);
+
+	scsi_esp_cmd(esp, cmd);
 }
 
-static void dma_mmu_get_scsi_sgl (struct NCR_ESP *esp, struct scsi_cmnd *sp)
-{
-    int sz = sp->SCp.buffers_residual;
-    struct scatterlist *sg = (struct scatterlist *) sp->SCp.buffer;
-    
-    while (sz >= 0) {
-	sg[sz].dma_address = vdma_alloc(CPHYSADDR(page_address(sg[sz].page) + sg[sz].offset), sg[sz].length);
-	sz--;
-    }
-    sp->SCp.ptr=(char *)(sp->SCp.buffer->dma_address);
-}    
-
-static void dma_mmu_release_scsi_one (struct NCR_ESP *esp, struct scsi_cmnd *sp)
+static int jazz_esp_dma_error(struct esp *esp)
 {
-    vdma_free(sp->SCp.have_data_in);
+	u32 enable = vdma_get_enable((int)esp->dma_regs);
+
+	if (enable & (R4030_MEM_INTR|R4030_ADDR_INTR))
+		return 1;
+
+	return 0;
 }
 
-static void dma_mmu_release_scsi_sgl (struct NCR_ESP *esp, struct scsi_cmnd *sp)
+static const struct esp_driver_ops jazz_esp_ops = {
+	.esp_write8	=	jazz_esp_write8,
+	.esp_read8	=	jazz_esp_read8,
+	.map_single	=	jazz_esp_map_single,
+	.map_sg		=	jazz_esp_map_sg,
+	.unmap_single	=	jazz_esp_unmap_single,
+	.unmap_sg	=	jazz_esp_unmap_sg,
+	.irq_pending	=	jazz_esp_irq_pending,
+	.reset_dma	=	jazz_esp_reset_dma,
+	.dma_drain	=	jazz_esp_dma_drain,
+	.dma_invalidate	=	jazz_esp_dma_invalidate,
+	.send_dma_cmd	=	jazz_esp_send_dma_cmd,
+	.dma_error	=	jazz_esp_dma_error,
+};
+
+static int __devinit esp_jazz_probe(struct platform_device *dev)
 {
-    int sz = sp->use_sg - 1;
-    struct scatterlist *sg = (struct scatterlist *)sp->request_buffer;
-			
-    while(sz >= 0) {
-	vdma_free(sg[sz].dma_address);
-	sz--;
-    }
+	struct scsi_host_template *tpnt = &scsi_esp_template;
+	struct Scsi_Host *host;
+	struct esp *esp;
+	struct resource *res;
+	int err;
+
+	host = scsi_host_alloc(tpnt, sizeof(struct esp));
+
+	err = -ENOMEM;
+	if (!host)
+		goto fail;
+
+	host->max_id = 8;
+	esp = host_to_esp(host);
+
+	esp->host = host;
+	esp->dev = dev;
+	esp->ops = &jazz_esp_ops;
+
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!res)
+		goto fail_unlink;
+
+	esp->regs = (void __iomem *)res->start;
+	if (!esp->regs)
+		goto fail_unlink;
+
+	res = platform_get_resource(dev, IORESOURCE_MEM, 1);
+	if (!res)
+		goto fail_unlink;
+
+	esp->dma_regs = (void __iomem *)res->start;
+
+	esp->command_block = dma_alloc_coherent(esp->dev, 16,
+						&esp->command_block_dma,
+						GFP_KERNEL);
+	if (!esp->command_block)
+		goto fail_unmap_regs;
+
+	host->irq = platform_get_irq(dev, 0);
+	err = request_irq(host->irq, scsi_esp_intr, IRQF_SHARED, "ESP", esp);
+	if (err < 0)
+		goto fail_unmap_command_block;
+
+	esp->scsi_id = 7;
+	esp->host->this_id = esp->scsi_id;
+	esp->scsi_id_mask = (1 << esp->scsi_id);
+	esp->cfreq = 40000000;
+
+	dev_set_drvdata(&dev->dev, esp);
+
+	err = scsi_esp_register(esp, &dev->dev);
+	if (err)
+		goto fail_free_irq;
+
+	return 0;
+
+fail_free_irq:
+	free_irq(host->irq, esp);
+fail_unmap_command_block:
+	dma_free_coherent(esp->dev, 16,
+			  esp->command_block,
+			  esp->command_block_dma);
+fail_unmap_regs:
+fail_unlink:
+	scsi_host_put(host);
+fail:
+	return err;
 }
 
-static void dma_advance_sg (struct scsi_cmnd *sp)
+static int __devexit esp_jazz_remove(struct platform_device *dev)
 {
-    sp->SCp.ptr = (char *)(sp->SCp.buffer->dma_address);
+	struct esp *esp = dev_get_drvdata(&dev->dev);
+	unsigned int irq = esp->host->irq;
+
+	scsi_esp_unregister(esp);
+
+	free_irq(irq, esp);
+	dma_free_coherent(esp->dev, 16,
+			  esp->command_block,
+			  esp->command_block_dma);
+
+	scsi_host_put(esp->host);
+
+	return 0;
 }
 
-#define JAZZ_HDC_LED   0xe000d100 /* FIXME, find correct address */
+static struct platform_driver esp_jazz_driver = {
+	.probe		= esp_jazz_probe,
+	.remove		= __devexit_p(esp_jazz_remove),
+	.driver	= {
+		.name	= "jazz_esp",
+	},
+};
 
-static void dma_led_off(struct NCR_ESP *esp)
+static int __init jazz_esp_init(void)
 {
-#if 0    
-    *(unsigned char *)JAZZ_HDC_LED = 0;
-#endif    
+	return platform_driver_register(&esp_jazz_driver);
 }
 
-static void dma_led_on(struct NCR_ESP *esp)
-{    
-#if 0    
-    *(unsigned char *)JAZZ_HDC_LED = 1;
-#endif    
+static void __exit jazz_esp_exit(void)
+{
+	platform_driver_unregister(&esp_jazz_driver);
 }
 
-static struct scsi_host_template driver_template = {
-	.proc_name		= "jazz_esp",
-	.proc_info		= esp_proc_info,
-	.name			= "ESP 100/100a/200",
-	.detect			= jazz_esp_detect,
-	.slave_alloc		= esp_slave_alloc,
-	.slave_destroy		= esp_slave_destroy,
-	.release		= jazz_esp_release,
-	.info			= esp_info,
-	.queuecommand		= esp_queue,
-	.eh_abort_handler	= esp_abort,
-	.eh_bus_reset_handler	= esp_reset,
-	.can_queue		= 7,
-	.this_id		= 7,
-	.sg_tablesize		= SG_ALL,
-	.cmd_per_lun		= 1,
-	.use_clustering		= DISABLE_CLUSTERING,
-};
-#include "scsi_module.c"
+MODULE_DESCRIPTION("JAZZ ESP SCSI driver");
+MODULE_AUTHOR("Thomas Bogendoerfer (tsbogend@alpha.franken.de)");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+module_init(jazz_esp_init);
+module_exit(jazz_esp_exit);
diff --git a/drivers/scsi/pluto.c b/drivers/scsi/pluto.c
index 3b2e1a53e6e2..d953d43fe2e6 100644
--- a/drivers/scsi/pluto.c
+++ b/drivers/scsi/pluto.c
@@ -4,6 +4,7 @@
  *
  */
 
+#include <linux/completion.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
 #include <linux/types.h>
@@ -50,16 +51,10 @@ static struct ctrl_inquiry {
 } *fcs __initdata;
 static int fcscount __initdata = 0;
 static atomic_t fcss __initdata = ATOMIC_INIT(0);
-DECLARE_MUTEX_LOCKED(fc_sem);
+static DECLARE_COMPLETION(fc_detect_complete);
 
 static int pluto_encode_addr(Scsi_Cmnd *SCpnt, u16 *addr, fc_channel *fc, fcp_cmnd *fcmd);
 
-static void __init pluto_detect_timeout(unsigned long data)
-{
-	PLND(("Timeout\n"))
-	up(&fc_sem);
-}
-
 static void __init pluto_detect_done(Scsi_Cmnd *SCpnt)
 {
 	/* Do nothing */
@@ -69,7 +64,7 @@ static void __init pluto_detect_scsi_done(Scsi_Cmnd *SCpnt)
 {
 	PLND(("Detect done %08lx\n", (long)SCpnt))
 	if (atomic_dec_and_test (&fcss))
-		up(&fc_sem);
+		complete(&fc_detect_complete);
 }
 
 int pluto_slave_configure(struct scsi_device *device)
@@ -96,7 +91,6 @@ int __init pluto_detect(struct scsi_host_template *tpnt)
 	int i, retry, nplutos;
 	fc_channel *fc;
 	struct scsi_device dev;
-	DEFINE_TIMER(fc_timer, pluto_detect_timeout, 0, 0);
 
 	tpnt->proc_name = "pluto";
 	fcscount = 0;
@@ -187,15 +181,11 @@ int __init pluto_detect(struct scsi_host_template *tpnt)
 			}
 		}
 	    
-		fc_timer.expires = jiffies + 10 * HZ;
-		add_timer(&fc_timer);
-		
-		down(&fc_sem);
+		wait_for_completion_timeout(&fc_detect_complete, 10 * HZ);
 		PLND(("Woken up\n"))
 		if (!atomic_read(&fcss))
 			break; /* All fc channels have answered us */
 	}
-	del_timer_sync(&fc_timer);
 
 	PLND(("Finished search\n"))
 	for (i = 0, nplutos = 0; i < fcscount; i++) {
diff --git a/drivers/serial/suncore.c b/drivers/serial/suncore.c
index e35d9ab359f1..b45ba5392dd3 100644
--- a/drivers/serial/suncore.c
+++ b/drivers/serial/suncore.c
@@ -30,9 +30,9 @@ void
 sunserial_console_termios(struct console *con)
 {
 	char mode[16], buf[16], *s;
-	char *mode_prop = "ttyX-mode";
-	char *cd_prop = "ttyX-ignore-cd";
-	char *dtr_prop = "ttyX-rts-dtr-off";
+	char mode_prop[] = "ttyX-mode";
+	char cd_prop[]   = "ttyX-ignore-cd";
+	char dtr_prop[]  = "ttyX-rts-dtr-off";
 	char *ssp_console_modes_prop = "ssp-console-modes";
 	int baud, bits, stop, cflag;
 	char parity;
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index 0985193dc57d..15b6e1cb040b 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -1239,7 +1239,7 @@ static inline struct console *SUNZILOG_CONSOLE(void)
 #define SUNZILOG_CONSOLE()	(NULL)
 #endif
 
-static void __init sunzilog_init_kbdms(struct uart_sunzilog_port *up, int channel)
+static void __devinit sunzilog_init_kbdms(struct uart_sunzilog_port *up, int channel)
 {
 	int baud, brg;
 
@@ -1259,7 +1259,7 @@ static void __init sunzilog_init_kbdms(struct uart_sunzilog_port *up, int channe
 }
 
 #ifdef CONFIG_SERIO
-static void __init sunzilog_register_serio(struct uart_sunzilog_port *up)
+static void __devinit sunzilog_register_serio(struct uart_sunzilog_port *up)
 {
 	struct serio *serio = &up->serio;