Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 678 insertions, 0 deletions

diff --git a/include/acpi/acmacros.h b/include/acpi/acmacros.h
new file mode 100644
index 000000000000..fcaced16b16f
--- /dev/null
+++ b/include/acpi/acmacros.h
@@ -0,0 +1,678 @@
+/******************************************************************************
+ *
+ * Name: acmacros.h - C macros for the entire subsystem.
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACMACROS_H__
+#define __ACMACROS_H__
+
+
+/*
+ * Data manipulation macros
+ */
+#define ACPI_LOWORD(l)                  ((u16)(u32)(l))
+#define ACPI_HIWORD(l)                  ((u16)((((u32)(l)) >> 16) & 0xFFFF))
+#define ACPI_LOBYTE(l)                  ((u8)(u16)(l))
+#define ACPI_HIBYTE(l)                  ((u8)((((u16)(l)) >> 8) & 0xFF))
+
+#define ACPI_SET_BIT(target,bit)        ((target) |= (bit))
+#define ACPI_CLEAR_BIT(target,bit)      ((target) &= ~(bit))
+#define ACPI_MIN(a,b)                   (((a)<(b))?(a):(b))
+
+
+#if ACPI_MACHINE_WIDTH == 16
+
+/*
+ * For 16-bit addresses, we have to assume that the upper 32 bits
+ * are zero.
+ */
+#define ACPI_LODWORD(l)                 ((u32)(l))
+#define ACPI_HIDWORD(l)                 ((u32)(0))
+
+#define ACPI_GET_ADDRESS(a)             ((a).lo)
+#define ACPI_STORE_ADDRESS(a,b)         {(a).hi=0;(a).lo=(u32)(b);}
+#define ACPI_VALID_ADDRESS(a)           ((a).hi | (a).lo)
+
+#else
+#ifdef ACPI_NO_INTEGER64_SUPPORT
+/*
+ * acpi_integer is 32-bits, no 64-bit support on this platform
+ */
+#define ACPI_LODWORD(l)                 ((u32)(l))
+#define ACPI_HIDWORD(l)                 ((u32)(0))
+
+#define ACPI_GET_ADDRESS(a)             (a)
+#define ACPI_STORE_ADDRESS(a,b)         ((a)=(b))
+#define ACPI_VALID_ADDRESS(a)           (a)
+
+#else
+
+/*
+ * Full 64-bit address/integer on both 32-bit and 64-bit platforms
+ */
+#define ACPI_LODWORD(l)                 ((u32)(u64)(l))
+#define ACPI_HIDWORD(l)                 ((u32)(((*(struct uint64_struct *)(void *)(&l))).hi))
+
+#define ACPI_GET_ADDRESS(a)             (a)
+#define ACPI_STORE_ADDRESS(a,b)         ((a)=(acpi_physical_address)(b))
+#define ACPI_VALID_ADDRESS(a)           (a)
+#endif
+#endif
+
+/*
+ * printf() format helpers
+ */
+
+/* Split 64-bit integer into two 32-bit values. Use with %8.8X%8.8X */
+
+#define ACPI_FORMAT_UINT64(i)           ACPI_HIDWORD(i),ACPI_LODWORD(i)
+
+/*
+ * Extract a byte of data using a pointer.  Any more than a byte and we
+ * get into potential aligment issues -- see the STORE macros below
+ */
+#define ACPI_GET8(addr)                 (*(u8*)(addr))
+
+/* Pointer arithmetic */
+
+#define ACPI_PTR_ADD(t,a,b)             (t *) (void *)((char *)(a) + (acpi_native_uint)(b))
+#define ACPI_PTR_DIFF(a,b)              (acpi_native_uint) ((char *)(a) - (char *)(b))
+
+/* Pointer/Integer type conversions */
+
+#define ACPI_TO_POINTER(i)              ACPI_PTR_ADD (void, (void *) NULL,(acpi_native_uint)i)
+#define ACPI_TO_INTEGER(p)              ACPI_PTR_DIFF (p,(void *) NULL)
+#define ACPI_OFFSET(d,f)                (acpi_size) ACPI_PTR_DIFF (&(((d *)0)->f),(void *) NULL)
+#define ACPI_FADT_OFFSET(f)             ACPI_OFFSET (FADT_DESCRIPTOR, f)
+
+#define ACPI_CAST_PTR(t, p)             ((t *)(void *)(p))
+#define ACPI_CAST_INDIRECT_PTR(t, p)    ((t **)(void *)(p))
+
+#if ACPI_MACHINE_WIDTH == 16
+#define ACPI_STORE_POINTER(d,s)         ACPI_MOVE_32_TO_32(d,s)
+#define ACPI_PHYSADDR_TO_PTR(i)         (void *)(i)
+#define ACPI_PTR_TO_PHYSADDR(i)         (u32) (char *)(i)
+#else
+#define ACPI_PHYSADDR_TO_PTR(i)         ACPI_TO_POINTER(i)
+#define ACPI_PTR_TO_PHYSADDR(i)         ACPI_TO_INTEGER(i)
+#endif
+
+/*
+ * Macros for moving data around to/from buffers that are possibly unaligned.
+ * If the hardware supports the transfer of unaligned data, just do the store.
+ * Otherwise, we have to move one byte at a time.
+ */
+#ifdef ACPI_BIG_ENDIAN
+/*
+ * Macros for big-endian machines
+ */
+
+/* This macro sets a buffer index, starting from the end of the buffer */
+
+#define ACPI_BUFFER_INDEX(buf_len,buf_offset,byte_gran) ((buf_len) - (((buf_offset)+1) * (byte_gran)))
+
+/* These macros reverse the bytes during the move, converting little-endian to big endian */
+
+	 /* Big Endian      <==        Little Endian */
+	 /*  Hi...Lo                     Lo...Hi     */
+/* 16-bit source, 16/32/64 destination */
+
+#define ACPI_MOVE_16_TO_16(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[1];\
+			  ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[0];}
+
+#define ACPI_MOVE_16_TO_32(d,s)         {(*(u32 *)(void *)(d))=0;\
+					  ((u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\
+					  ((u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];}
+
+#define ACPI_MOVE_16_TO_64(d,s)         {(*(u64 *)(void *)(d))=0;\
+							   ((u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\
+							   ((u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];}
+
+/* 32-bit source, 16/32/64 destination */
+
+#define ACPI_MOVE_32_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s)    /* Truncate to 16 */
+
+#define ACPI_MOVE_32_TO_32(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[3];\
+									  ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[2];\
+									  ((  u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\
+									  ((  u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];}
+
+#define ACPI_MOVE_32_TO_64(d,s)         {(*(u64 *)(void *)(d))=0;\
+										   ((u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[3];\
+										   ((u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[2];\
+										   ((u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\
+										   ((u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];}
+
+/* 64-bit source, 16/32/64 destination */
+
+#define ACPI_MOVE_64_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s)    /* Truncate to 16 */
+
+#define ACPI_MOVE_64_TO_32(d,s)         ACPI_MOVE_32_TO_32(d,s)    /* Truncate to 32 */
+
+#define ACPI_MOVE_64_TO_64(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[7];\
+										 ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[6];\
+										 ((  u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[5];\
+										 ((  u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[4];\
+										 ((  u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[3];\
+										 ((  u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[2];\
+										 ((  u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\
+										 ((  u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];}
+#else
+/*
+ * Macros for little-endian machines
+ */
+
+/* This macro sets a buffer index, starting from the beginning of the buffer */
+
+#define ACPI_BUFFER_INDEX(buf_len,buf_offset,byte_gran) (buf_offset)
+
+#ifdef ACPI_MISALIGNED_TRANSFERS
+
+/* The hardware supports unaligned transfers, just do the little-endian move */
+
+#if ACPI_MACHINE_WIDTH == 16
+
+/* No 64-bit integers */
+/* 16-bit source, 16/32/64 destination */
+
+#define ACPI_MOVE_16_TO_16(d,s)         *(u16 *)(void *)(d) = *(u16 *)(void *)(s)
+#define ACPI_MOVE_16_TO_32(d,s)         *(u32 *)(void *)(d) = *(u16 *)(void *)(s)
+#define ACPI_MOVE_16_TO_64(d,s)         ACPI_MOVE_16_TO_32(d,s)
+
+/* 32-bit source, 16/32/64 destination */
+
+#define ACPI_MOVE_32_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s)    /* Truncate to 16 */
+#define ACPI_MOVE_32_TO_32(d,s)         *(u32 *)(void *)(d) = *(u32 *)(void *)(s)
+#define ACPI_MOVE_32_TO_64(d,s)         ACPI_MOVE_32_TO_32(d,s)
+
+/* 64-bit source, 16/32/64 destination */
+
+#define ACPI_MOVE_64_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s)    /* Truncate to 16 */
+#define ACPI_MOVE_64_TO_32(d,s)         ACPI_MOVE_32_TO_32(d,s)    /* Truncate to 32 */
+#define ACPI_MOVE_64_TO_64(d,s)         ACPI_MOVE_32_TO_32(d,s)
+
+#else
+/* 16-bit source, 16/32/64 destination */
+
+#define ACPI_MOVE_16_TO_16(d,s)         *(u16 *)(void *)(d) = *(u16 *)(void *)(s)
+#define ACPI_MOVE_16_TO_32(d,s)         *(u32 *)(void *)(d) = *(u16 *)(void *)(s)
+#define ACPI_MOVE_16_TO_64(d,s)         *(u64 *)(void *)(d) = *(u16 *)(void *)(s)
+
+/* 32-bit source, 16/32/64 destination */
+
+#define ACPI_MOVE_32_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s)    /* Truncate to 16 */
+#define ACPI_MOVE_32_TO_32(d,s)         *(u32 *)(void *)(d) = *(u32 *)(void *)(s)
+#define ACPI_MOVE_32_TO_64(d,s)         *(u64 *)(void *)(d) = *(u32 *)(void *)(s)
+
+/* 64-bit source, 16/32/64 destination */
+
+#define ACPI_MOVE_64_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s)    /* Truncate to 16 */
+#define ACPI_MOVE_64_TO_32(d,s)         ACPI_MOVE_32_TO_32(d,s)    /* Truncate to 32 */
+#define ACPI_MOVE_64_TO_64(d,s)         *(u64 *)(void *)(d) = *(u64 *)(void *)(s)
+#endif
+
+#else
+/*
+ * The hardware does not support unaligned transfers.  We must move the
+ * data one byte at a time.  These macros work whether the source or
+ * the destination (or both) is/are unaligned.  (Little-endian move)
+ */
+
+/* 16-bit source, 16/32/64 destination */
+
+#define ACPI_MOVE_16_TO_16(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\
+										 ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];}
+
+#define ACPI_MOVE_16_TO_32(d,s)         {(*(u32 *)(void *)(d)) = 0; ACPI_MOVE_16_TO_16(d,s);}
+#define ACPI_MOVE_16_TO_64(d,s)         {(*(u64 *)(void *)(d)) = 0; ACPI_MOVE_16_TO_16(d,s);}
+
+/* 32-bit source, 16/32/64 destination */
+
+#define ACPI_MOVE_32_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s)    /* Truncate to 16 */
+
+#define ACPI_MOVE_32_TO_32(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\
+										 ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];\
+										 ((  u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[2];\
+										 ((  u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[3];}
+
+#define ACPI_MOVE_32_TO_64(d,s)         {(*(u64 *)(void *)(d)) = 0; ACPI_MOVE_32_TO_32(d,s);}
+
+/* 64-bit source, 16/32/64 destination */
+
+#define ACPI_MOVE_64_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s)    /* Truncate to 16 */
+#define ACPI_MOVE_64_TO_32(d,s)         ACPI_MOVE_32_TO_32(d,s)    /* Truncate to 32 */
+#define ACPI_MOVE_64_TO_64(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\
+										 ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];\
+										 ((  u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[2];\
+										 ((  u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[3];\
+										 ((  u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[4];\
+										 ((  u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[5];\
+										 ((  u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[6];\
+										 ((  u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[7];}
+#endif
+#endif
+
+/* Macros based on machine integer width */
+
+#if ACPI_MACHINE_WIDTH == 16
+#define ACPI_MOVE_SIZE_TO_16(d,s)       ACPI_MOVE_16_TO_16(d,s)
+
+#elif ACPI_MACHINE_WIDTH == 32
+#define ACPI_MOVE_SIZE_TO_16(d,s)       ACPI_MOVE_32_TO_16(d,s)
+
+#elif ACPI_MACHINE_WIDTH == 64
+#define ACPI_MOVE_SIZE_TO_16(d,s)       ACPI_MOVE_64_TO_16(d,s)
+
+#else
+#error unknown ACPI_MACHINE_WIDTH
+#endif
+
+
+/*
+ * Fast power-of-two math macros for non-optimized compilers
+ */
+#define _ACPI_DIV(value,power_of2)      ((u32) ((value) >> (power_of2)))
+#define _ACPI_MUL(value,power_of2)      ((u32) ((value) << (power_of2)))
+#define _ACPI_MOD(value,divisor)        ((u32) ((value) & ((divisor) -1)))
+
+#define ACPI_DIV_2(a)                   _ACPI_DIV(a,1)
+#define ACPI_MUL_2(a)                   _ACPI_MUL(a,1)
+#define ACPI_MOD_2(a)                   _ACPI_MOD(a,2)
+
+#define ACPI_DIV_4(a)                   _ACPI_DIV(a,2)
+#define ACPI_MUL_4(a)                   _ACPI_MUL(a,2)
+#define ACPI_MOD_4(a)                   _ACPI_MOD(a,4)
+
+#define ACPI_DIV_8(a)                   _ACPI_DIV(a,3)
+#define ACPI_MUL_8(a)                   _ACPI_MUL(a,3)
+#define ACPI_MOD_8(a)                   _ACPI_MOD(a,8)
+
+#define ACPI_DIV_16(a)                  _ACPI_DIV(a,4)
+#define ACPI_MUL_16(a)                  _ACPI_MUL(a,4)
+#define ACPI_MOD_16(a)                  _ACPI_MOD(a,16)
+
+
+/*
+ * Rounding macros (Power of two boundaries only)
+ */
+#define ACPI_ROUND_DOWN(value,boundary)      (((acpi_native_uint)(value)) & (~(((acpi_native_uint) boundary)-1)))
+#define ACPI_ROUND_UP(value,boundary)        ((((acpi_native_uint)(value)) + (((acpi_native_uint) boundary)-1)) & (~(((acpi_native_uint) boundary)-1)))
+
+#define ACPI_ROUND_DOWN_TO_32_BITS(a)        ACPI_ROUND_DOWN(a,4)
+#define ACPI_ROUND_DOWN_TO_64_BITS(a)        ACPI_ROUND_DOWN(a,8)
+#define ACPI_ROUND_DOWN_TO_NATIVE_WORD(a)    ACPI_ROUND_DOWN(a,ALIGNED_ADDRESS_BOUNDARY)
+
+#define ACPI_ROUND_UP_to_32_bITS(a)          ACPI_ROUND_UP(a,4)
+#define ACPI_ROUND_UP_to_64_bITS(a)          ACPI_ROUND_UP(a,8)
+#define ACPI_ROUND_UP_TO_NATIVE_WORD(a)      ACPI_ROUND_UP(a,ALIGNED_ADDRESS_BOUNDARY)
+
+
+#define ACPI_ROUND_BITS_UP_TO_BYTES(a)       ACPI_DIV_8((a) + 7)
+#define ACPI_ROUND_BITS_DOWN_TO_BYTES(a)     ACPI_DIV_8((a))
+
+#define ACPI_ROUND_UP_TO_1K(a)               (((a) + 1023) >> 10)
+
+/* Generic (non-power-of-two) rounding */
+
+#define ACPI_ROUND_UP_TO(value,boundary)     (((value) + ((boundary)-1)) / (boundary))
+
+/*
+ * Bitmask creation
+ * Bit positions start at zero.
+ * MASK_BITS_ABOVE creates a mask starting AT the position and above
+ * MASK_BITS_BELOW creates a mask starting one bit BELOW the position
+ */
+#define ACPI_MASK_BITS_ABOVE(position)       (~((ACPI_INTEGER_MAX) << ((u32) (position))))
+#define ACPI_MASK_BITS_BELOW(position)       ((ACPI_INTEGER_MAX) << ((u32) (position)))
+
+#define ACPI_IS_OCTAL_DIGIT(d)               (((char)(d) >= '0') && ((char)(d) <= '7'))
+
+
+/* Bitfields within ACPI registers */
+
+#define ACPI_REGISTER_PREPARE_BITS(val, pos, mask)      ((val << pos) & mask)
+#define ACPI_REGISTER_INSERT_VALUE(reg, pos, mask, val)  reg = (reg & (~(mask))) | ACPI_REGISTER_PREPARE_BITS(val, pos, mask)
+
+/*
+ * An struct acpi_namespace_node * can appear in some contexts,
+ * where a pointer to an union acpi_operand_object    can also
+ * appear.  This macro is used to distinguish them.
+ *
+ * The "Descriptor" field is the first field in both structures.
+ */
+#define ACPI_GET_DESCRIPTOR_TYPE(d)     (((union acpi_descriptor *)(void *)(d))->descriptor_id)
+#define ACPI_SET_DESCRIPTOR_TYPE(d,t)   (((union acpi_descriptor *)(void *)(d))->descriptor_id = t)
+
+
+/* Macro to test the object type */
+
+#define ACPI_GET_OBJECT_TYPE(d)         (((union acpi_operand_object *)(void *)(d))->common.type)
+
+/* Macro to check the table flags for SINGLE or MULTIPLE tables are allowed */
+
+#define ACPI_IS_SINGLE_TABLE(x)         (((x) & 0x01) == ACPI_TABLE_SINGLE ? 1 : 0)
+
+/*
+ * Macros for the master AML opcode table
+ */
+#if defined(ACPI_DISASSEMBLER) || defined (ACPI_DEBUG_OUTPUT)
+#define ACPI_OP(name,Pargs,Iargs,obj_type,class,type,flags)    {name,(u32)(Pargs),(u32)(Iargs),(u32)(flags),obj_type,class,type}
+#else
+#define ACPI_OP(name,Pargs,Iargs,obj_type,class,type,flags)    {(u32)(Pargs),(u32)(Iargs),(u32)(flags),obj_type,class,type}
+#endif
+
+#ifdef ACPI_DISASSEMBLER
+#define ACPI_DISASM_ONLY_MEMBERS(a)     a;
+#else
+#define ACPI_DISASM_ONLY_MEMBERS(a)
+#endif
+
+#define ARG_TYPE_WIDTH                  5
+#define ARG_1(x)                        ((u32)(x))
+#define ARG_2(x)                        ((u32)(x) << (1 * ARG_TYPE_WIDTH))
+#define ARG_3(x)                        ((u32)(x) << (2 * ARG_TYPE_WIDTH))
+#define ARG_4(x)                        ((u32)(x) << (3 * ARG_TYPE_WIDTH))
+#define ARG_5(x)                        ((u32)(x) << (4 * ARG_TYPE_WIDTH))
+#define ARG_6(x)                        ((u32)(x) << (5 * ARG_TYPE_WIDTH))
+
+#define ARGI_LIST1(a)                   (ARG_1(a))
+#define ARGI_LIST2(a,b)                 (ARG_1(b)|ARG_2(a))
+#define ARGI_LIST3(a,b,c)               (ARG_1(c)|ARG_2(b)|ARG_3(a))
+#define ARGI_LIST4(a,b,c,d)             (ARG_1(d)|ARG_2(c)|ARG_3(b)|ARG_4(a))
+#define ARGI_LIST5(a,b,c,d,e)           (ARG_1(e)|ARG_2(d)|ARG_3(c)|ARG_4(b)|ARG_5(a))
+#define ARGI_LIST6(a,b,c,d,e,f)         (ARG_1(f)|ARG_2(e)|ARG_3(d)|ARG_4(c)|ARG_5(b)|ARG_6(a))
+
+#define ARGP_LIST1(a)                   (ARG_1(a))
+#define ARGP_LIST2(a,b)                 (ARG_1(a)|ARG_2(b))
+#define ARGP_LIST3(a,b,c)               (ARG_1(a)|ARG_2(b)|ARG_3(c))
+#define ARGP_LIST4(a,b,c,d)             (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d))
+#define ARGP_LIST5(a,b,c,d,e)           (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e))
+#define ARGP_LIST6(a,b,c,d,e,f)         (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e)|ARG_6(f))
+
+#define GET_CURRENT_ARG_TYPE(list)      (list & ((u32) 0x1F))
+#define INCREMENT_ARG_LIST(list)        (list >>= ((u32) ARG_TYPE_WIDTH))
+
+
+/*
+ * Reporting macros that are never compiled out
+ */
+#define ACPI_PARAM_LIST(pl)                 pl
+
+/*
+ * Error reporting.  These versions add callers module and line#.  Since
+ * _THIS_MODULE gets compiled out when ACPI_DEBUG_OUTPUT isn't defined, only
+ * use it in debug mode.
+ */
+#ifdef ACPI_DEBUG_OUTPUT
+
+#define ACPI_REPORT_INFO(fp)                {acpi_ut_report_info(_THIS_MODULE,__LINE__,_COMPONENT); \
+												acpi_os_printf ACPI_PARAM_LIST(fp);}
+#define ACPI_REPORT_ERROR(fp)               {acpi_ut_report_error(_THIS_MODULE,__LINE__,_COMPONENT); \
+												acpi_os_printf ACPI_PARAM_LIST(fp);}
+#define ACPI_REPORT_WARNING(fp)             {acpi_ut_report_warning(_THIS_MODULE,__LINE__,_COMPONENT); \
+												acpi_os_printf ACPI_PARAM_LIST(fp);}
+#define ACPI_REPORT_NSERROR(s,e)            acpi_ns_report_error(_THIS_MODULE,__LINE__,_COMPONENT, s, e);
+
+#define ACPI_REPORT_METHOD_ERROR(s,n,p,e)   acpi_ns_report_method_error(_THIS_MODULE,__LINE__,_COMPONENT, s, n, p, e);
+
+#else
+
+#define ACPI_REPORT_INFO(fp)                {acpi_ut_report_info("ACPI",__LINE__,_COMPONENT); \
+												acpi_os_printf ACPI_PARAM_LIST(fp);}
+#define ACPI_REPORT_ERROR(fp)               {acpi_ut_report_error("ACPI",__LINE__,_COMPONENT); \
+												acpi_os_printf ACPI_PARAM_LIST(fp);}
+#define ACPI_REPORT_WARNING(fp)             {acpi_ut_report_warning("ACPI",__LINE__,_COMPONENT); \
+												acpi_os_printf ACPI_PARAM_LIST(fp);}
+#define ACPI_REPORT_NSERROR(s,e)            acpi_ns_report_error("ACPI",__LINE__,_COMPONENT, s, e);
+
+#define ACPI_REPORT_METHOD_ERROR(s,n,p,e)   acpi_ns_report_method_error("ACPI",__LINE__,_COMPONENT, s, n, p, e);
+
+#endif
+
+/* Error reporting.  These versions pass thru the module and line# */
+
+#define _ACPI_REPORT_INFO(a,b,c,fp)         {acpi_ut_report_info(a,b,c); \
+												acpi_os_printf ACPI_PARAM_LIST(fp);}
+#define _ACPI_REPORT_ERROR(a,b,c,fp)        {acpi_ut_report_error(a,b,c); \
+												acpi_os_printf ACPI_PARAM_LIST(fp);}
+#define _ACPI_REPORT_WARNING(a,b,c,fp)      {acpi_ut_report_warning(a,b,c); \
+												acpi_os_printf ACPI_PARAM_LIST(fp);}
+
+/*
+ * Debug macros that are conditionally compiled
+ */
+#ifdef ACPI_DEBUG_OUTPUT
+
+#define ACPI_MODULE_NAME(name)               static char ACPI_UNUSED_VAR *_THIS_MODULE = name;
+
+/*
+ * Function entry tracing.
+ * The first parameter should be the procedure name as a quoted string.  This is declared
+ * as a local string ("_proc_name) so that it can be also used by the function exit macros below.
+ */
+#define ACPI_FUNCTION_NAME(a)               struct acpi_debug_print_info _debug_info; \
+												_debug_info.component_id = _COMPONENT; \
+												_debug_info.proc_name  = a; \
+												_debug_info.module_name = _THIS_MODULE;
+
+#define ACPI_FUNCTION_TRACE(a)              ACPI_FUNCTION_NAME(a) \
+												acpi_ut_trace(__LINE__,&_debug_info)
+#define ACPI_FUNCTION_TRACE_PTR(a,b)        ACPI_FUNCTION_NAME(a) \
+												acpi_ut_trace_ptr(__LINE__,&_debug_info,(void *)b)
+#define ACPI_FUNCTION_TRACE_U32(a,b)        ACPI_FUNCTION_NAME(a) \
+												acpi_ut_trace_u32(__LINE__,&_debug_info,(u32)b)
+#define ACPI_FUNCTION_TRACE_STR(a,b)        ACPI_FUNCTION_NAME(a) \
+												acpi_ut_trace_str(__LINE__,&_debug_info,(char *)b)
+
+#define ACPI_FUNCTION_ENTRY()               acpi_ut_track_stack_ptr()
+
+/*
+ * Function exit tracing.
+ * WARNING: These macros include a return statement.  This is usually considered
+ * bad form, but having a separate exit macro is very ugly and difficult to maintain.
+ * One of the FUNCTION_TRACE macros above must be used in conjunction with these macros
+ * so that "_proc_name" is defined.
+ */
+#ifdef ACPI_USE_DO_WHILE_0
+#define ACPI_DO_WHILE0(a)               do a while(0)
+#else
+#define ACPI_DO_WHILE0(a)               a
+#endif
+
+#define return_VOID                     ACPI_DO_WHILE0 ({acpi_ut_exit(__LINE__,&_debug_info);return;})
+#define return_ACPI_STATUS(s)           ACPI_DO_WHILE0 ({acpi_ut_status_exit(__LINE__,&_debug_info,(s));return((s));})
+#define return_VALUE(s)                 ACPI_DO_WHILE0 ({acpi_ut_value_exit(__LINE__,&_debug_info,(acpi_integer)(s));return((s));})
+#define return_PTR(s)                   ACPI_DO_WHILE0 ({acpi_ut_ptr_exit(__LINE__,&_debug_info,(u8 *)(s));return((s));})
+
+/* Conditional execution */
+
+#define ACPI_DEBUG_EXEC(a)              a
+#define ACPI_NORMAL_EXEC(a)
+
+#define ACPI_DEBUG_DEFINE(a)            a;
+#define ACPI_DEBUG_ONLY_MEMBERS(a)      a;
+#define _VERBOSE_STRUCTURES
+
+
+/* Stack and buffer dumping */
+
+#define ACPI_DUMP_STACK_ENTRY(a)        acpi_ex_dump_operand((a),0)
+#define ACPI_DUMP_OPERANDS(a,b,c,d,e)   acpi_ex_dump_operands(a,b,c,d,e,_THIS_MODULE,__LINE__)
+
+
+#define ACPI_DUMP_ENTRY(a,b)            acpi_ns_dump_entry (a,b)
+
+#ifdef ACPI_FUTURE_USAGE
+#define ACPI_DUMP_TABLES(a,b)           acpi_ns_dump_tables(a,b)
+#endif
+
+#define ACPI_DUMP_PATHNAME(a,b,c,d)     acpi_ns_dump_pathname(a,b,c,d)
+#define ACPI_DUMP_RESOURCE_LIST(a)      acpi_rs_dump_resource_list(a)
+#define ACPI_DUMP_BUFFER(a,b)           acpi_ut_dump_buffer((u8 *)a,b,DB_BYTE_DISPLAY,_COMPONENT)
+#define ACPI_BREAK_MSG(a)               acpi_os_signal (ACPI_SIGNAL_BREAKPOINT,(a))
+
+
+/*
+ * Generate INT3 on ACPI_ERROR (Debug only!)
+ */
+#define ACPI_ERROR_BREAK
+#ifdef  ACPI_ERROR_BREAK
+#define ACPI_BREAK_ON_ERROR(lvl)        if ((lvl)&ACPI_ERROR) \
+											acpi_os_signal(ACPI_SIGNAL_BREAKPOINT,"Fatal error encountered\n")
+#else
+#define ACPI_BREAK_ON_ERROR(lvl)
+#endif
+
+/*
+ * Master debug print macros
+ * Print iff:
+ *    1) Debug print for the current component is enabled
+ *    2) Debug error level or trace level for the print statement is enabled
+ */
+#define ACPI_DEBUG_PRINT(pl)            acpi_ut_debug_print ACPI_PARAM_LIST(pl)
+#define ACPI_DEBUG_PRINT_RAW(pl)        acpi_ut_debug_print_raw ACPI_PARAM_LIST(pl)
+
+
+#else
+/*
+ * This is the non-debug case -- make everything go away,
+ * leaving no executable debug code!
+ */
+#define ACPI_MODULE_NAME(name)
+#define _THIS_MODULE ""
+
+#define ACPI_DEBUG_EXEC(a)
+#define ACPI_NORMAL_EXEC(a)             a;
+
+#define ACPI_DEBUG_DEFINE(a)
+#define ACPI_DEBUG_ONLY_MEMBERS(a)
+#define ACPI_FUNCTION_NAME(a)
+#define ACPI_FUNCTION_TRACE(a)
+#define ACPI_FUNCTION_TRACE_PTR(a,b)
+#define ACPI_FUNCTION_TRACE_U32(a,b)
+#define ACPI_FUNCTION_TRACE_STR(a,b)
+#define ACPI_FUNCTION_EXIT
+#define ACPI_FUNCTION_STATUS_EXIT(s)
+#define ACPI_FUNCTION_VALUE_EXIT(s)
+#define ACPI_FUNCTION_ENTRY()
+#define ACPI_DUMP_STACK_ENTRY(a)
+#define ACPI_DUMP_OPERANDS(a,b,c,d,e)
+#define ACPI_DUMP_ENTRY(a,b)
+
+#ifdef ACPI_FUTURE_USAGE
+#define ACPI_DUMP_TABLES(a,b)
+#endif
+
+#define ACPI_DUMP_PATHNAME(a,b,c,d)
+#define ACPI_DUMP_RESOURCE_LIST(a)
+#define ACPI_DUMP_BUFFER(a,b)
+#define ACPI_DEBUG_PRINT(pl)
+#define ACPI_DEBUG_PRINT_RAW(pl)
+#define ACPI_BREAK_MSG(a)
+
+#define return_VOID                     return
+#define return_ACPI_STATUS(s)           return(s)
+#define return_VALUE(s)                 return(s)
+#define return_PTR(s)                   return(s)
+
+#endif
+
+/*
+ * Some code only gets executed when the debugger is built in.
+ * Note that this is entirely independent of whether the
+ * DEBUG_PRINT stuff (set by ACPI_DEBUG_OUTPUT) is on, or not.
+ */
+#ifdef ACPI_DEBUGGER
+#define ACPI_DEBUGGER_EXEC(a)           a
+#else
+#define ACPI_DEBUGGER_EXEC(a)
+#endif
+
+
+/*
+ * For 16-bit code, we want to shrink some things even though
+ * we are using ACPI_DEBUG_OUTPUT to get the debug output
+ */
+#if ACPI_MACHINE_WIDTH == 16
+#undef ACPI_DEBUG_ONLY_MEMBERS
+#undef _VERBOSE_STRUCTURES
+#define ACPI_DEBUG_ONLY_MEMBERS(a)
+#endif
+
+
+#ifdef ACPI_DEBUG_OUTPUT
+/*
+ * 1) Set name to blanks
+ * 2) Copy the object name
+ */
+#define ACPI_ADD_OBJECT_NAME(a,b)       ACPI_MEMSET (a->common.name, ' ', sizeof (a->common.name));\
+										ACPI_STRNCPY (a->common.name, acpi_gbl_ns_type_names[b], sizeof (a->common.name))
+#else
+
+#define ACPI_ADD_OBJECT_NAME(a,b)
+#endif
+
+
+/*
+ * Memory allocation tracking (DEBUG ONLY)
+ */
+#ifndef ACPI_DBG_TRACK_ALLOCATIONS
+
+/* Memory allocation */
+
+#define ACPI_MEM_ALLOCATE(a)            acpi_ut_allocate((acpi_size)(a),_COMPONENT,_THIS_MODULE,__LINE__)
+#define ACPI_MEM_CALLOCATE(a)           acpi_ut_callocate((acpi_size)(a), _COMPONENT,_THIS_MODULE,__LINE__)
+#define ACPI_MEM_FREE(a)                acpi_os_free(a)
+#define ACPI_MEM_TRACKING(a)
+
+
+#else
+
+/* Memory allocation */
+
+#define ACPI_MEM_ALLOCATE(a)            acpi_ut_allocate_and_track((acpi_size)(a),_COMPONENT,_THIS_MODULE,__LINE__)
+#define ACPI_MEM_CALLOCATE(a)           acpi_ut_callocate_and_track((acpi_size)(a), _COMPONENT,_THIS_MODULE,__LINE__)
+#define ACPI_MEM_FREE(a)                acpi_ut_free_and_track(a,_COMPONENT,_THIS_MODULE,__LINE__)
+#define ACPI_MEM_TRACKING(a)            a
+
+#endif /* ACPI_DBG_TRACK_ALLOCATIONS */
+
+#endif /* ACMACROS_H */