Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 110 insertions, 0 deletions

diff --git a/include/asm-arm26/hardware.h b/include/asm-arm26/hardware.h
new file mode 100644
index 000000000000..82fc55e2a009
--- /dev/null
+++ b/include/asm-arm26/hardware.h
@@ -0,0 +1,110 @@
+/*
+ *  linux/include/asm-arm/arch-arc/hardware.h
+ *
+ *  Copyright (C) 1996-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This file contains the hardware definitions of the
+ *  Acorn Archimedes/A5000 machines.
+ *
+ *  Modifications:
+ *   04-04-1998	PJB/RMK	Merged arc and a5k versions
+ */
+#ifndef __ASM_HARDWARE_H
+#define __ASM_HARDWARE_H
+
+#include <linux/config.h>
+
+
+/*
+ * What hardware must be present - these can be tested by the kernel
+ * source.
+ */
+#define HAS_IOC
+#define HAS_MEMC
+#define HAS_VIDC
+
+#define VDMA_ALIGNMENT  PAGE_SIZE
+#define VDMA_XFERSIZE   16
+#define VDMA_INIT       0
+#define VDMA_START      1
+#define VDMA_END        2
+
+#ifndef __ASSEMBLY__
+extern void memc_write(unsigned int reg, unsigned long val);
+
+#define video_set_dma(start,end,offset)                         \
+do {                                                            \
+        memc_write (VDMA_START, (start >> 2));                  \
+        memc_write (VDMA_END, (end - VDMA_XFERSIZE) >> 2);      \
+        memc_write (VDMA_INIT, (offset >> 2));                  \
+} while (0)
+#endif
+
+
+/* Hardware addresses of major areas.
+ *  *_START is the physical address
+ *  *_SIZE  is the size of the region
+ *  *_BASE  is the virtual address
+ */
+#define IO_START		0x03000000
+#define IO_SIZE			0x01000000
+#define IO_BASE			0x03000000
+
+/*
+ * Screen mapping information
+ */
+#define SCREEN_START		0x02000000
+#define SCREEN_END		0x02078000
+#define SCREEN_SIZE		0x00078000
+#define SCREEN_BASE		0x02000000
+
+
+#define EXPMASK_BASE		0x03360000
+#define IOEB_BASE		0x03350000
+#define VIDC_BASE		0x03400000
+#define LATCHA_BASE		0x03250040
+#define LATCHB_BASE		0x03250018
+#define IOC_BASE		0x03200000
+#define FLOPPYDMA_BASE		0x0302a000
+#define PCIO_BASE		0x03010000
+
+// FIXME - are the below correct?
+#define PODSLOT_IOC0_BASE       0x03240000
+#define PODSLOT_IOC_SIZE        (1 << 14)
+#define PODSLOT_MEMC_BASE       0x03000000
+#define PODSLOT_MEMC_SIZE       (1 << 14)
+
+#define vidc_writel(val)	__raw_writel(val, VIDC_BASE)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * for use with inb/outb
+ */
+#define IOEB_VID_CTL		(IOEB_BASE + 0x48)
+#define IOEB_PRESENT		(IOEB_BASE + 0x50)
+#define IOEB_PSCLR		(IOEB_BASE + 0x58)
+#define IOEB_MONTYPE		(IOEB_BASE + 0x70)
+
+//FIXME - These adresses are weird - ISTR some weirdo address shifting stuff was going on here...
+#define IO_EC_IOC_BASE		0x80090000
+#define IO_EC_MEMC_BASE		0x80000000
+
+#ifdef CONFIG_ARCH_ARC
+/* A680 hardware */
+#define WD1973_BASE		0x03290000
+#define WD1973_LATCH		0x03350000
+#define Z8530_BASE		0x032b0008
+#define SCSI_BASE		0x03100000
+#endif
+
+#endif
+
+#define	EXPMASK_STATUS		(EXPMASK_BASE + 0x00)
+#define EXPMASK_ENABLE		(EXPMASK_BASE + 0x04)
+
+#endif