Move all of include/asm-m68knommu to arch/m68knommu/include/asm.

With the current kbuild infrastructure in place no other changes
are required for this to work.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

1 files changed, 0 insertions, 118 deletions

diff --git a/include/asm-m68knommu/mcfwdebug.h b/include/asm-m68knommu/mcfwdebug.h
deleted file mode 100644
index 27f70e45d700..000000000000
--- a/include/asm-m68knommu/mcfwdebug.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/****************************************************************************/
-
-/*
- *	mcfdebug.h -- ColdFire Debug Module support.
- *
- * 	(C) Copyright 2001, Lineo Inc. (www.lineo.com) 
- */
-
-/****************************************************************************/
-#ifndef mcfdebug_h
-#define mcfdebug_h
-/****************************************************************************/
-
-/* Define the debug module registers */
-#define MCFDEBUG_CSR	0x0			/* Configuration status		*/
-#define MCFDEBUG_BAAR	0x5			/* BDM address attribute	*/
-#define MCFDEBUG_AATR	0x6			/* Address attribute trigger	*/
-#define MCFDEBUG_TDR	0x7			/* Trigger definition		*/
-#define MCFDEBUG_PBR	0x8			/* PC breakpoint		*/
-#define MCFDEBUG_PBMR	0x9			/* PC breakpoint mask		*/
-#define MCFDEBUG_ABHR	0xc			/* High address breakpoint	*/
-#define MCFDEBUG_ABLR	0xd			/* Low address breakpoint	*/
-#define MCFDEBUG_DBR	0xe			/* Data breakpoint		*/
-#define MCFDEBUG_DBMR	0xf			/* Data breakpoint mask		*/
-
-/* Define some handy constants for the trigger definition register */
-#define MCFDEBUG_TDR_TRC_DISP	0x00000000	/* display on DDATA only	*/
-#define MCFDEBUG_TDR_TRC_HALT	0x40000000	/* Processor halt on BP		*/
-#define MCFDEBUG_TDR_TRC_INTR	0x80000000	/* Debug intr on BP		*/
-#define MCFDEBUG_TDR_LXT1	0x00004000	/* TDR level 1			*/
-#define MCFDEBUG_TDR_LXT2	0x00008000	/* TDR level 2			*/
-#define MCFDEBUG_TDR_EBL1	0x00002000	/* Enable breakpoint level 1	*/
-#define MCFDEBUG_TDR_EBL2	0x20000000	/* Enable breakpoint level 2	*/
-#define MCFDEBUG_TDR_EDLW1	0x00001000	/* Enable data BP longword	*/
-#define MCFDEBUG_TDR_EDLW2	0x10000000
-#define MCFDEBUG_TDR_EDWL1	0x00000800	/* Enable data BP lower word	*/
-#define MCFDEBUG_TDR_EDWL2	0x08000000
-#define MCFDEBUG_TDR_EDWU1	0x00000400	/* Enable data BP upper word	*/
-#define MCFDEBUG_TDR_EDWU2	0x04000000
-#define MCFDEBUG_TDR_EDLL1	0x00000200	/* Enable data BP low low byte	*/
-#define MCFDEBUG_TDR_EDLL2	0x02000000
-#define MCFDEBUG_TDR_EDLM1	0x00000100	/* Enable data BP low mid byte	*/
-#define MCFDEBUG_TDR_EDLM2	0x01000000
-#define MCFDEBUG_TDR_EDUM1	0x00000080	/* Enable data BP up mid byte	*/
-#define MCFDEBUG_TDR_EDUM2	0x00800000
-#define MCFDEBUG_TDR_EDUU1	0x00000040	/* Enable data BP up up byte	*/
-#define MCFDEBUG_TDR_EDUU2	0x00400000
-#define MCFDEBUG_TDR_DI1	0x00000020	/* Data BP invert		*/
-#define MCFDEBUG_TDR_DI2	0x00200000
-#define MCFDEBUG_TDR_EAI1	0x00000010	/* Enable address BP inverted	*/
-#define MCFDEBUG_TDR_EAI2	0x00100000
-#define MCFDEBUG_TDR_EAR1	0x00000008	/* Enable address BP range	*/
-#define MCFDEBUG_TDR_EAR2	0x00080000
-#define MCFDEBUG_TDR_EAL1	0x00000004	/* Enable address BP low	*/
-#define MCFDEBUG_TDR_EAL2	0x00040000
-#define MCFDEBUG_TDR_EPC1	0x00000002	/* Enable PC BP			*/
-#define MCFDEBUG_TDR_EPC2	0x00020000
-#define MCFDEBUG_TDR_PCI1	0x00000001	/* PC BP invert			*/
-#define MCFDEBUG_TDR_PCI2	0x00010000
-
-/* Constants for the address attribute trigger register */
-#define MCFDEBUG_AAR_RESET	0x00000005
-/* Fields not yet implemented */
-
-/* And some definitions for the writable sections of the CSR */
-#define MCFDEBUG_CSR_RESET	0x00100000
-#define MCFDEBUG_CSR_PSTCLK	0x00020000	/* PSTCLK disable		*/
-#define MCFDEBUG_CSR_IPW	0x00010000	/* Inhibit processor writes	*/
-#define MCFDEBUG_CSR_MAP	0x00008000	/* Processor refs in emul mode	*/
-#define MCFDEBUG_CSR_TRC	0x00004000	/* Emul mode on trace exception	*/
-#define MCFDEBUG_CSR_EMU	0x00002000	/* Force emulation mode		*/
-#define MCFDEBUG_CSR_DDC_READ	0x00000800	/* Debug data control		*/
-#define MCFDEBUG_CSR_DDC_WRITE	0x00001000
-#define MCFDEBUG_CSR_UHE	0x00000400	/* User mode halt enable	*/
-#define MCFDEBUG_CSR_BTB0	0x00000000	/* Branch target 0 bytes	*/
-#define MCFDEBUG_CSR_BTB2	0x00000100	/* Branch target 2 bytes	*/
-#define MCFDEBUG_CSR_BTB3	0x00000200	/* Branch target 3 bytes	*/
-#define MCFDEBUG_CSR_BTB4	0x00000300	/* Branch target 4 bytes	*/
-#define MCFDEBUG_CSR_NPL	0x00000040	/* Non-pipelined mode		*/
-#define MCFDEBUG_CSR_SSM	0x00000010	/* Single step mode		*/
-
-/* Constants for the BDM address attribute register */
-#define MCFDEBUG_BAAR_RESET	0x00000005
-/* Fields not yet implemented */
-
-
-/* This routine wrappers up the wdebug asm instruction so that the register
- * and value can be relatively easily specified.  The biggest hassle here is
- * that the debug module instructions (2 longs) must be long word aligned and
- * some pointer fiddling is performed to ensure this.
- */
-static inline void wdebug(int reg, unsigned long data) {
-	unsigned short dbg_spc[6];
-	unsigned short *dbg;
-
-	// Force alignment to long word boundary
-	dbg = (unsigned short *)((((unsigned long)dbg_spc) + 3) & 0xfffffffc);
-
-	// Build up the debug instruction
-	dbg[0] = 0x2c80 | (reg & 0xf);
-	dbg[1] = (data >> 16) & 0xffff;
-	dbg[2] = data & 0xffff;
-	dbg[3] = 0;
-
-	// Perform the wdebug instruction
-#if 0
-	// This strain is for gas which doesn't have the wdebug instructions defined
-	asm(	"move.l	%0, %%a0\n\t"
-		".word	0xfbd0\n\t"
-		".word	0x0003\n\t"
-	    :: "g" (dbg) : "a0");
-#else
-	// And this is for when it does
-	asm(	"wdebug	(%0)" :: "a" (dbg));
-#endif
-}
-
-#endif