Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 781 insertions, 0 deletions

diff --git a/include/asm-parisc/pdc.h b/include/asm-parisc/pdc.h
new file mode 100644
index 000000000000..8e23e4c674f6
--- /dev/null
+++ b/include/asm-parisc/pdc.h
@@ -0,0 +1,781 @@
+#ifndef _PARISC_PDC_H
+#define _PARISC_PDC_H
+
+#include <linux/config.h>
+
+/*
+ *	PDC return values ...
+ *	All PDC calls return a subset of these errors. 
+ */
+
+#define PDC_WARN		  3	/* Call completed with a warning */
+#define PDC_REQ_ERR_1		  2	/* See above			 */
+#define PDC_REQ_ERR_0		  1	/* Call would generate a requestor error */
+#define PDC_OK			  0	/* Call completed successfully	*/
+#define PDC_BAD_PROC		 -1	/* Called non-existent procedure*/
+#define PDC_BAD_OPTION		 -2	/* Called with non-existent option */
+#define PDC_ERROR		 -3	/* Call could not complete without an error */
+#define PDC_NE_MOD		 -5	/* Module not found		*/
+#define PDC_NE_CELL_MOD		 -7	/* Cell module not found	*/
+#define PDC_INVALID_ARG		-10	/* Called with an invalid argument */
+#define PDC_BUS_POW_WARN	-12	/* Call could not complete in allowed power budget */
+#define PDC_NOT_NARROW		-17	/* Narrow mode not supported	*/
+
+
+/*
+ *	PDC entry points...
+ */
+
+#define PDC_POW_FAIL	1		/* perform a power-fail		*/
+#define PDC_POW_FAIL_PREPARE	0	/* prepare for powerfail	*/
+
+#define PDC_CHASSIS	2		/* PDC-chassis functions	*/
+#define PDC_CHASSIS_DISP	0	/* update chassis display	*/
+#define PDC_CHASSIS_WARN	1	/* return chassis warnings	*/
+#define PDC_CHASSIS_DISPWARN	2	/* update&return chassis status */
+#define PDC_RETURN_CHASSIS_INFO 128	/* HVERSION dependent: return chassis LED/LCD info  */
+
+#define PDC_PIM         3               /* Get PIM data                 */
+#define PDC_PIM_HPMC            0       /* Transfer HPMC data           */
+#define PDC_PIM_RETURN_SIZE     1       /* Get Max buffer needed for PIM*/
+#define PDC_PIM_LPMC            2       /* Transfer HPMC data           */
+#define PDC_PIM_SOFT_BOOT       3       /* Transfer Soft Boot data      */
+#define PDC_PIM_TOC             4       /* Transfer TOC data            */
+
+#define PDC_MODEL	4		/* PDC model information call	*/
+#define PDC_MODEL_INFO		0	/* returns information 		*/
+#define PDC_MODEL_BOOTID	1	/* set the BOOT_ID		*/
+#define PDC_MODEL_VERSIONS	2	/* returns cpu-internal versions*/
+#define PDC_MODEL_SYSMODEL	3	/* return system model info	*/
+#define PDC_MODEL_ENSPEC	4	/* enable specific option	*/
+#define PDC_MODEL_DISPEC	5	/* disable specific option	*/
+#define PDC_MODEL_CPU_ID	6	/* returns cpu-id (only newer machines!) */
+#define PDC_MODEL_CAPABILITIES	7	/* returns OS32/OS64-flags	*/
+#define PDC_MODEL_GET_BOOT__OP	8	/* returns boot test options	*/
+#define PDC_MODEL_SET_BOOT__OP	9	/* set boot test options	*/
+
+#define PA89_INSTRUCTION_SET	0x4	/* capatibilies returned	*/
+#define PA90_INSTRUCTION_SET	0x8
+
+#define PDC_CACHE	5		/* return/set cache (& TLB) info*/
+#define PDC_CACHE_INFO		0	/* returns information 		*/
+#define PDC_CACHE_SET_COH	1	/* set coherence state		*/
+#define PDC_CACHE_RET_SPID	2	/* returns space-ID bits	*/
+
+#define PDC_HPA		6		/* return HPA of processor	*/
+#define PDC_HPA_PROCESSOR	0
+#define PDC_HPA_MODULES		1
+
+#define PDC_COPROC	7		/* Co-Processor (usually FP unit(s)) */
+#define PDC_COPROC_CFG		0	/* Co-Processor Cfg (FP unit(s) enabled?) */
+
+#define PDC_IODC	8		/* talk to IODC			*/
+#define PDC_IODC_READ		0	/* read IODC entry point	*/
+/*      PDC_IODC_RI_			 * INDEX parameter of PDC_IODC_READ */
+#define PDC_IODC_RI_DATA_BYTES	0	/* IODC Data Bytes		*/
+/*				1, 2	   obsolete - HVERSION dependent*/
+#define PDC_IODC_RI_INIT	3	/* Initialize module		*/
+#define PDC_IODC_RI_IO		4	/* Module input/output		*/
+#define PDC_IODC_RI_SPA		5	/* Module input/output		*/
+#define PDC_IODC_RI_CONFIG	6	/* Module input/output		*/
+/*				7	  obsolete - HVERSION dependent */
+#define PDC_IODC_RI_TEST	8	/* Module input/output		*/
+#define PDC_IODC_RI_TLB		9	/* Module input/output		*/
+#define PDC_IODC_NINIT		2	/* non-destructive init		*/
+#define PDC_IODC_DINIT		3	/* destructive init		*/
+#define PDC_IODC_MEMERR		4	/* check for memory errors	*/
+#define PDC_IODC_INDEX_DATA	0	/* get first 16 bytes from mod IODC */
+#define PDC_IODC_BUS_ERROR	-4	/* bus error return value	*/
+#define PDC_IODC_INVALID_INDEX	-5	/* invalid index return value	*/
+#define PDC_IODC_COUNT		-6	/* count is too small		*/
+
+#define PDC_TOD		9		/* time-of-day clock (TOD)	*/
+#define PDC_TOD_READ		0	/* read TOD			*/
+#define PDC_TOD_WRITE		1	/* write TOD			*/
+#define PDC_TOD_ITIMER		2	/* calibrate Interval Timer (CR16) */
+
+#define PDC_STABLE	10		/* stable storage (sprockets)	*/
+#define PDC_STABLE_READ		0
+#define PDC_STABLE_WRITE	1
+#define PDC_STABLE_RETURN_SIZE	2
+#define PDC_STABLE_VERIFY_CONTENTS 3
+#define PDC_STABLE_INITIALIZE	4
+
+#define PDC_NVOLATILE	11		/* often not implemented	*/
+
+#define PDC_ADD_VALID	12		/* Memory validation PDC call	*/
+#define PDC_ADD_VALID_VERIFY	0	/* Make PDC_ADD_VALID verify region */
+
+#define PDC_INSTR	15		/* get instr to invoke PDCE_CHECK() */
+
+#define PDC_PROC	16		/* (sprockets)			*/
+
+#define PDC_CONFIG	16		/* (sprockets)			*/
+#define PDC_CONFIG_DECONFIG	0
+#define PDC_CONFIG_DRECONFIG	1
+#define PDC_CONFIG_DRETURN_CONFIG 2
+
+#define PDC_BLOCK_TLB	18		/* manage hardware block-TLB	*/
+#define PDC_BTLB_INFO		0	/* returns parameter 		*/
+#define PDC_BTLB_INSERT		1	/* insert BTLB entry		*/
+#define PDC_BTLB_PURGE		2	/* purge BTLB entries 		*/
+#define PDC_BTLB_PURGE_ALL	3	/* purge all BTLB entries 	*/
+
+#define PDC_TLB		19		/* manage hardware TLB miss handling */
+#define PDC_TLB_INFO		0	/* returns parameter 		*/
+#define PDC_TLB_SETUP		1	/* set up miss handling 	*/
+
+#define PDC_MEM		20		/* Manage memory		*/
+#define PDC_MEM_MEMINFO		0
+#define PDC_MEM_ADD_PAGE	1
+#define PDC_MEM_CLEAR_PDT	2
+#define PDC_MEM_READ_PDT	3
+#define PDC_MEM_RESET_CLEAR	4
+#define PDC_MEM_GOODMEM		5
+#define PDC_MEM_TABLE		128	/* Non contig mem map (sprockets) */
+#define PDC_MEM_RETURN_ADDRESS_TABLE	PDC_MEM_TABLE
+#define PDC_MEM_GET_MEMORY_SYSTEM_TABLES_SIZE	131
+#define PDC_MEM_GET_MEMORY_SYSTEM_TABLES	132
+#define PDC_MEM_GET_PHYSICAL_LOCATION_FROM_MEMORY_ADDRESS 133
+
+#define PDC_MEM_RET_SBE_REPLACED	5	/* PDC_MEM return values */
+#define PDC_MEM_RET_DUPLICATE_ENTRY	4
+#define PDC_MEM_RET_BUF_SIZE_SMALL	1
+#define PDC_MEM_RET_PDT_FULL		-11
+#define PDC_MEM_RET_INVALID_PHYSICAL_LOCATION ~0ULL
+
+#ifndef __ASSEMBLY__
+typedef struct {
+    unsigned long long	baseAddr;
+    unsigned int	pages;
+    unsigned int	reserved;
+} MemAddrTable_t;
+#endif
+
+
+#define PDC_PSW		21		/* Get/Set default System Mask  */
+#define PDC_PSW_MASK		0	/* Return mask                  */
+#define PDC_PSW_GET_DEFAULTS	1	/* Return defaults              */
+#define PDC_PSW_SET_DEFAULTS	2	/* Set default                  */
+#define PDC_PSW_ENDIAN_BIT	1	/* set for big endian           */
+#define PDC_PSW_WIDE_BIT	2	/* set for wide mode            */ 
+
+#define PDC_SYSTEM_MAP	22		/* find system modules		*/
+#define PDC_FIND_MODULE 	0
+#define PDC_FIND_ADDRESS	1
+#define PDC_TRANSLATE_PATH	2
+
+#define PDC_SOFT_POWER	23		/* soft power switch		*/
+#define PDC_SOFT_POWER_INFO	0	/* return info about the soft power switch */
+#define PDC_SOFT_POWER_ENABLE	1	/* enable/disable soft power switch */
+
+
+/* HVERSION dependent */
+
+/* The PDC_MEM_MAP calls */
+#define PDC_MEM_MAP	128		/* on s700: return page info	*/
+#define PDC_MEM_MAP_HPA		0	/* returns hpa of a module	*/
+
+#define PDC_EEPROM	129		/* EEPROM access		*/
+#define PDC_EEPROM_READ_WORD	0
+#define PDC_EEPROM_WRITE_WORD	1
+#define PDC_EEPROM_READ_BYTE	2
+#define PDC_EEPROM_WRITE_BYTE	3
+#define PDC_EEPROM_EEPROM_PASSWORD -1000
+
+#define PDC_NVM		130		/* NVM (non-volatile memory) access */
+#define PDC_NVM_READ_WORD	0
+#define PDC_NVM_WRITE_WORD	1
+#define PDC_NVM_READ_BYTE	2
+#define PDC_NVM_WRITE_BYTE	3
+
+#define PDC_SEED_ERROR	132		/* (sprockets)			*/
+
+#define PDC_IO		135		/* log error info, reset IO system */
+#define PDC_IO_READ_AND_CLEAR_ERRORS	0
+#define PDC_IO_RESET			1
+#define PDC_IO_RESET_DEVICES		2
+/* sets bits 6&7 (little endian) of the HcControl Register */
+#define PDC_IO_USB_SUSPEND	0xC000000000000000
+#define PDC_IO_EEPROM_IO_ERR_TABLE_FULL	-5	/* return value */
+#define PDC_IO_NO_SUSPEND		-6	/* return value */
+
+#define PDC_BROADCAST_RESET 136		/* reset all processors		*/
+#define PDC_DO_RESET		0	/* option: perform a broadcast reset */
+#define PDC_DO_FIRM_TEST_RESET	1	/* Do broadcast reset with bitmap */
+#define PDC_BR_RECONFIGURATION	2	/* reset w/reconfiguration	*/
+#define PDC_FIRM_TEST_MAGIC	0xab9ec36fUL    /* for this reboot only	*/
+
+#define PDC_LAN_STATION_ID 138		/* Hversion dependent mechanism for */
+#define PDC_LAN_STATION_ID_READ	0	/* getting the lan station address  */
+
+#define	PDC_LAN_STATION_ID_SIZE	6
+
+#define PDC_CHECK_RANGES 139		/* (sprockets)			*/
+
+#define PDC_NV_SECTIONS	141		/* (sprockets)			*/
+
+#define PDC_PERFORMANCE	142		/* performance monitoring	*/
+
+#define PDC_SYSTEM_INFO	143		/* system information		*/
+#define PDC_SYSINFO_RETURN_INFO_SIZE	0
+#define PDC_SYSINFO_RRETURN_SYS_INFO	1
+#define PDC_SYSINFO_RRETURN_ERRORS	2
+#define PDC_SYSINFO_RRETURN_WARNINGS	3
+#define PDC_SYSINFO_RETURN_REVISIONS	4
+#define PDC_SYSINFO_RRETURN_DIAGNOSE	5
+#define PDC_SYSINFO_RRETURN_HV_DIAGNOSE	1005
+
+#define PDC_RDR		144		/* (sprockets)			*/
+#define PDC_RDR_READ_BUFFER	0
+#define PDC_RDR_READ_SINGLE	1
+#define PDC_RDR_WRITE_SINGLE	2
+
+#define PDC_INTRIGUE	145 		/* (sprockets)			*/
+#define PDC_INTRIGUE_WRITE_BUFFER 	 0
+#define PDC_INTRIGUE_GET_SCRATCH_BUFSIZE 1
+#define PDC_INTRIGUE_START_CPU_COUNTERS	 2
+#define PDC_INTRIGUE_STOP_CPU_COUNTERS	 3
+
+#define PDC_STI		146 		/* STI access			*/
+/* same as PDC_PCI_XXX values (see below) */
+
+/* Legacy PDC definitions for same stuff */
+#define PDC_PCI_INDEX	147
+#define PDC_PCI_INTERFACE_INFO		0
+#define PDC_PCI_SLOT_INFO		1
+#define PDC_PCI_INFLIGHT_BYTES		2
+#define PDC_PCI_READ_CONFIG		3
+#define PDC_PCI_WRITE_CONFIG		4
+#define PDC_PCI_READ_PCI_IO		5
+#define PDC_PCI_WRITE_PCI_IO		6
+#define PDC_PCI_READ_CONFIG_DELAY	7
+#define PDC_PCI_UPDATE_CONFIG_DELAY	8
+#define PDC_PCI_PCI_PATH_TO_PCI_HPA	9
+#define PDC_PCI_PCI_HPA_TO_PCI_PATH	10
+#define PDC_PCI_PCI_PATH_TO_PCI_BUS	11
+#define PDC_PCI_PCI_RESERVED		12
+#define PDC_PCI_PCI_INT_ROUTE_SIZE	13
+#define PDC_PCI_GET_INT_TBL_SIZE	PDC_PCI_PCI_INT_ROUTE_SIZE
+#define PDC_PCI_PCI_INT_ROUTE		14
+#define PDC_PCI_GET_INT_TBL		PDC_PCI_PCI_INT_ROUTE 
+#define PDC_PCI_READ_MON_TYPE		15
+#define PDC_PCI_WRITE_MON_TYPE		16
+
+
+/* Get SCSI Interface Card info:  SDTR, SCSI ID, mode (SE vs LVD) */
+#define PDC_INITIATOR	163
+#define PDC_GET_INITIATOR	0
+#define PDC_SET_INITIATOR	1
+#define PDC_DELETE_INITIATOR	2
+#define PDC_RETURN_TABLE_SIZE	3
+#define PDC_RETURN_TABLE	4
+
+#define PDC_LINK	165 		/* (sprockets)			*/
+#define PDC_LINK_PCI_ENTRY_POINTS	0  /* list (Arg1) = 0 */
+#define PDC_LINK_USB_ENTRY_POINTS	1  /* list (Arg1) = 1 */
+
+
+/* constants for OS (NVM...) */
+#define OS_ID_NONE		0	/* Undefined OS ID	*/
+#define OS_ID_HPUX		1	/* HP-UX OS		*/
+#define OS_ID_LINUX		OS_ID_HPUX /* just use the same value as hpux */
+#define OS_ID_MPEXL		2	/* MPE XL OS		*/
+#define OS_ID_OSF		3	/* OSF OS		*/
+#define OS_ID_HPRT		4	/* HP-RT OS		*/
+#define OS_ID_NOVEL		5	/* NOVELL OS		*/
+#define OS_ID_NT		6	/* NT OS		*/
+
+
+/* constants for PDC_CHASSIS */
+#define OSTAT_OFF		0
+#define OSTAT_FLT		1 
+#define OSTAT_TEST		2
+#define OSTAT_INIT		3
+#define OSTAT_SHUT		4
+#define OSTAT_WARN		5
+#define OSTAT_RUN		6
+#define OSTAT_ON		7
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+extern int pdc_type;
+
+/* Values for pdc_type */
+#define PDC_TYPE_ILLEGAL	-1
+#define PDC_TYPE_PAT		 0 /* 64-bit PAT-PDC */
+#define PDC_TYPE_SYSTEM_MAP	 1 /* 32-bit, but supports PDC_SYSTEM_MAP */
+#define PDC_TYPE_SNAKE		 2 /* Doesn't support SYSTEM_MAP */
+
+struct pdc_chassis_info {       /* for PDC_CHASSIS_INFO */
+	unsigned long actcnt;   /* actual number of bytes returned */
+	unsigned long maxcnt;   /* maximum number of bytes that could be returned */
+};
+
+struct pdc_coproc_cfg {         /* for PDC_COPROC_CFG */
+        unsigned long ccr_functional;
+        unsigned long ccr_present;
+        unsigned long revision;
+        unsigned long model;
+};
+
+struct pdc_model {		/* for PDC_MODEL */
+	unsigned long hversion;
+	unsigned long sversion;
+	unsigned long hw_id;
+	unsigned long boot_id;
+	unsigned long sw_id;
+	unsigned long sw_cap;
+	unsigned long arch_rev;
+	unsigned long pot_key;
+	unsigned long curr_key;
+};
+
+/* Values for PDC_MODEL_CAPABILITES non-equivalent virtual aliasing support */
+
+#define PDC_MODEL_IOPDIR_FDC            (1 << 2)        /* see sba_iommu.c */
+#define PDC_MODEL_NVA_MASK		(3 << 4)
+#define PDC_MODEL_NVA_SUPPORTED		(0 << 4)
+#define PDC_MODEL_NVA_SLOW		(1 << 4)
+#define PDC_MODEL_NVA_UNSUPPORTED	(3 << 4)
+
+struct pdc_cache_cf {		/* for PDC_CACHE  (I/D-caches) */
+    unsigned long
+#ifdef __LP64__
+		cc_padW:32,
+#endif
+		cc_alias: 4,	/* alias boundaries for virtual addresses   */
+		cc_block: 4,	/* to determine most efficient stride */
+		cc_line	: 3,	/* maximum amount written back as a result of store (multiple of 16 bytes) */
+		cc_shift: 2,	/* how much to shift cc_block left */
+		cc_wt	: 1,	/* 0 = WT-Dcache, 1 = WB-Dcache */
+		cc_sh	: 2,	/* 0 = separate I/D-cache, else shared I/D-cache */
+		cc_cst  : 3,	/* 0 = incoherent D-cache, 1=coherent D-cache */
+		cc_pad1 : 5,	/* reserved */
+		cc_assoc: 8;	/* associativity of I/D-cache */
+};
+
+struct pdc_tlb_cf {		/* for PDC_CACHE (I/D-TLB's) */
+    unsigned long tc_pad0:12,	/* reserved */
+#ifdef __LP64__
+		tc_padW:32,
+#endif
+		tc_sh	: 2,	/* 0 = separate I/D-TLB, else shared I/D-TLB */
+		tc_hv   : 1,	/* HV */
+		tc_page : 1,	/* 0 = 2K page-size-machine, 1 = 4k page size */
+		tc_cst  : 3,	/* 0 = incoherent operations, else coherent operations */
+		tc_aid  : 5,	/* ITLB: width of access ids of processor (encoded!) */
+		tc_pad1 : 8;	/* ITLB: width of space-registers (encoded) */
+};
+
+struct pdc_cache_info {		/* main-PDC_CACHE-structure (caches & TLB's) */
+	/* I-cache */
+	unsigned long	ic_size;	/* size in bytes */
+	struct pdc_cache_cf ic_conf;	/* configuration */
+	unsigned long	ic_base;	/* base-addr */
+	unsigned long	ic_stride;
+	unsigned long	ic_count;
+	unsigned long	ic_loop;
+	/* D-cache */
+	unsigned long	dc_size;	/* size in bytes */
+	struct pdc_cache_cf dc_conf;	/* configuration */
+	unsigned long	dc_base;	/* base-addr */
+	unsigned long	dc_stride;
+	unsigned long	dc_count;
+	unsigned long	dc_loop;
+	/* Instruction-TLB */
+	unsigned long	it_size;	/* number of entries in I-TLB */
+	struct pdc_tlb_cf it_conf;	/* I-TLB-configuration */
+	unsigned long	it_sp_base;
+	unsigned long	it_sp_stride;
+	unsigned long	it_sp_count;
+	unsigned long	it_off_base;
+	unsigned long	it_off_stride;
+	unsigned long	it_off_count;
+	unsigned long	it_loop;
+	/* data-TLB */
+	unsigned long	dt_size;	/* number of entries in D-TLB */
+	struct pdc_tlb_cf dt_conf;	/* D-TLB-configuration */
+	unsigned long	dt_sp_base;
+	unsigned long	dt_sp_stride;
+	unsigned long	dt_sp_count;
+	unsigned long	dt_off_base;
+	unsigned long	dt_off_stride;
+	unsigned long	dt_off_count;
+	unsigned long	dt_loop;
+};
+
+#if 0
+/* If you start using the next struct, you'll have to adjust it to
+ * work with 64-bit firmware I think -PB
+ */
+struct pdc_iodc {     /* PDC_IODC */
+	unsigned char   hversion_model;
+	unsigned char 	hversion;
+	unsigned char 	spa;
+	unsigned char 	type;
+	unsigned int	sversion_rev:4;
+	unsigned int	sversion_model:19;
+	unsigned int	sversion_opt:8;
+	unsigned char	rev;
+	unsigned char	dep;
+	unsigned char	features;
+	unsigned char	pad1;
+	unsigned int	checksum:16;
+	unsigned int	length:16;
+	unsigned int    pad[15];
+} __attribute__((aligned(8))) ;
+#endif
+
+#ifndef CONFIG_PA20
+/* no BLTBs in pa2.0 processors */
+struct pdc_btlb_info_range {
+	__u8 res00;
+	__u8 num_i;
+	__u8 num_d;
+	__u8 num_comb;
+};
+
+struct pdc_btlb_info {	/* PDC_BLOCK_TLB, return of PDC_BTLB_INFO */
+	unsigned int min_size;	/* minimum size of BTLB in pages */
+	unsigned int max_size;	/* maximum size of BTLB in pages */
+	struct pdc_btlb_info_range fixed_range_info;
+	struct pdc_btlb_info_range variable_range_info;
+};
+
+#endif /* !CONFIG_PA20 */
+
+#ifdef __LP64__
+struct pdc_memory_table_raddr { /* PDC_MEM/PDC_MEM_TABLE (return info) */
+	unsigned long entries_returned;
+	unsigned long entries_total;
+};
+
+struct pdc_memory_table {       /* PDC_MEM/PDC_MEM_TABLE (arguments) */
+	unsigned long paddr;
+	unsigned int  pages;
+	unsigned int  reserved;
+};
+#endif /* __LP64__ */
+
+struct pdc_system_map_mod_info { /* PDC_SYSTEM_MAP/FIND_MODULE */
+	unsigned long mod_addr;
+	unsigned long mod_pgs;
+	unsigned long add_addrs;
+};
+
+struct pdc_system_map_addr_info { /* PDC_SYSTEM_MAP/FIND_ADDRESS */
+	unsigned long mod_addr;
+	unsigned long mod_pgs;
+};
+
+struct pdc_initiator { /* PDC_INITIATOR */
+	int host_id;
+	int factor;
+	int width;
+	int mode;
+};
+
+struct hardware_path {
+	char  flags;	/* see bit definitions below */
+	char  bc[6];	/* Bus Converter routing info to a specific */
+			/* I/O adaptor (< 0 means none, > 63 resvd) */
+	char  mod;	/* fixed field of specified module */
+};
+
+/*
+ * Device path specifications used by PDC.
+ */
+struct pdc_module_path {
+	struct hardware_path path;
+	unsigned int layers[6]; /* device-specific info (ctlr #, unit # ...) */
+};
+
+#ifndef CONFIG_PA20
+/* Only used on some pre-PA2.0 boxes */
+struct pdc_memory_map {		/* PDC_MEMORY_MAP */
+	unsigned long hpa;	/* mod's register set address */
+	unsigned long more_pgs;	/* number of additional I/O pgs */
+};
+#endif
+
+struct pdc_tod {
+	unsigned long tod_sec; 
+	unsigned long tod_usec;
+};
+
+/* architected results from PDC_PIM/transfer hpmc on a PA1.1 machine */
+
+struct pdc_hpmc_pim_11 { /* PDC_PIM */
+	__u32 gr[32];
+	__u32 cr[32];
+	__u32 sr[8];
+	__u32 iasq_back;
+	__u32 iaoq_back;
+	__u32 check_type;
+	__u32 cpu_state;
+	__u32 rsvd1;
+	__u32 cache_check;
+	__u32 tlb_check;
+	__u32 bus_check;
+	__u32 assists_check;
+	__u32 rsvd2;
+	__u32 assist_state;
+	__u32 responder_addr;
+	__u32 requestor_addr;
+	__u32 path_info;
+	__u64 fr[32];
+};
+
+/*
+ * architected results from PDC_PIM/transfer hpmc on a PA2.0 machine
+ *
+ * Note that PDC_PIM doesn't care whether or not wide mode was enabled
+ * so the results are different on  PA1.1 vs. PA2.0 when in narrow mode.
+ *
+ * Note also that there are unarchitected results available, which
+ * are hversion dependent. Do a "ser pim 0 hpmc" after rebooting, since
+ * the firmware is probably the best way of printing hversion dependent
+ * data.
+ */
+
+struct pdc_hpmc_pim_20 { /* PDC_PIM */
+	__u64 gr[32];
+	__u64 cr[32];
+	__u64 sr[8];
+	__u64 iasq_back;
+	__u64 iaoq_back;
+	__u32 check_type;
+	__u32 cpu_state;
+	__u32 cache_check;
+	__u32 tlb_check;
+	__u32 bus_check;
+	__u32 assists_check;
+	__u32 assist_state;
+	__u32 path_info;
+	__u64 responder_addr;
+	__u64 requestor_addr;
+	__u64 fr[32];
+};
+
+#endif /* __ASSEMBLY__ */
+
+/* flags of the device_path (see below) */
+#define	PF_AUTOBOOT	0x80
+#define	PF_AUTOSEARCH	0x40
+#define	PF_TIMER	0x0F
+
+#ifndef __ASSEMBLY__
+
+struct device_path {		/* page 1-69 */
+	unsigned char flags;	/* flags see above! */
+	unsigned char bc[6];	/* bus converter routing info */
+	unsigned char mod;
+	unsigned int  layers[6];/* device-specific layer-info */
+} __attribute__((aligned(8))) ;
+
+struct pz_device {
+	struct	device_path dp;	/* see above */
+	/* struct	iomod *hpa; */
+	unsigned int hpa;	/* HPA base address */
+	/* char	*spa; */
+	unsigned int spa;	/* SPA base address */
+	/* int	(*iodc_io)(struct iomod*, ...); */
+	unsigned int iodc_io;	/* device entry point */
+	short	pad;		/* reserved */
+	unsigned short cl_class;/* see below */
+} __attribute__((aligned(8))) ;
+
+#endif /* __ASSEMBLY__ */
+
+/* cl_class
+ * page 3-33 of IO-Firmware ARS
+ * IODC ENTRY_INIT(Search first) RET[1]
+ */
+#define	CL_NULL		0	/* invalid */
+#define	CL_RANDOM	1	/* random access (as disk) */
+#define	CL_SEQU		2	/* sequential access (as tape) */
+#define	CL_DUPLEX	7	/* full-duplex point-to-point (RS-232, Net) */
+#define	CL_KEYBD	8	/* half-duplex console (HIL Keyboard) */
+#define	CL_DISPL	9	/* half-duplex console (display) */
+#define	CL_FC		10	/* FiberChannel access media */
+
+#if 0
+/* FIXME: DEVCLASS_* duplicates CL_* (above).  Delete DEVCLASS_*? */
+#define DEVCLASS_RANDOM		1
+#define DEVCLASS_SEQU		2
+#define DEVCLASS_DUPLEX		7
+#define DEVCLASS_KEYBD		8
+#define DEVCLASS_DISP		9
+#endif
+
+/* IODC ENTRY_INIT() */
+#define ENTRY_INIT_SRCH_FRST	2
+#define ENTRY_INIT_SRCH_NEXT	3
+#define ENTRY_INIT_MOD_DEV	4
+#define ENTRY_INIT_DEV		5
+#define ENTRY_INIT_MOD		6
+#define ENTRY_INIT_MSG		9
+
+/* IODC ENTRY_IO() */
+#define ENTRY_IO_BOOTIN		0
+#define ENTRY_IO_BOOTOUT	1
+#define ENTRY_IO_CIN		2
+#define ENTRY_IO_COUT		3
+#define ENTRY_IO_CLOSE		4
+#define ENTRY_IO_GETMSG		9
+#define ENTRY_IO_BBLOCK_IN	16
+#define ENTRY_IO_BBLOCK_OUT	17
+
+/* IODC ENTRY_SPA() */
+
+/* IODC ENTRY_CONFIG() */
+
+/* IODC ENTRY_TEST() */
+
+/* IODC ENTRY_TLB() */
+
+
+/* DEFINITION OF THE ZERO-PAGE (PAG0) */
+/* based on work by Jason Eckhardt (jason@equator.com) */
+
+#ifndef __ASSEMBLY__
+
+#define PAGE0   ((struct zeropage *)__PAGE_OFFSET)
+
+struct zeropage {
+	/* [0x000] initialize vectors (VEC) */
+	unsigned int	vec_special;		/* must be zero */
+	/* int	(*vec_pow_fail)(void);*/
+	unsigned int	vec_pow_fail; /* power failure handler */
+	/* int	(*vec_toc)(void); */
+	unsigned int	vec_toc;
+	unsigned int	vec_toclen;
+	/* int	(*vec_rendz)(void); */
+	unsigned int vec_rendz;
+	int	vec_pow_fail_flen;
+	int	vec_pad[10];		
+	
+	/* [0x040] reserved processor dependent */
+	int	pad0[112];
+
+	/* [0x200] reserved */
+	int	pad1[84];
+
+	/* [0x350] memory configuration (MC) */
+	int	memc_cont;		/* contiguous mem size (bytes) */
+	int	memc_phsize;		/* physical memory size */
+	int	memc_adsize;		/* additional mem size, bytes of SPA space used by PDC */
+	unsigned int mem_pdc_hi;	/* used for 64-bit */
+
+	/* [0x360] various parameters for the boot-CPU */
+	/* unsigned int *mem_booterr[8]; */
+	unsigned int mem_booterr[8];	/* ptr to boot errors */
+	unsigned int mem_free;		/* first location, where OS can be loaded */
+	/* struct iomod *mem_hpa; */
+	unsigned int mem_hpa;		/* HPA of the boot-CPU */
+	/* int (*mem_pdc)(int, ...); */
+	unsigned int mem_pdc;		/* PDC entry point */
+	unsigned int mem_10msec;	/* number of clock ticks in 10msec */
+
+	/* [0x390] initial memory module (IMM) */
+	/* struct iomod *imm_hpa; */
+	unsigned int imm_hpa;		/* HPA of the IMM */
+	int	imm_soft_boot;		/* 0 = was hard boot, 1 = was soft boot */
+	unsigned int	imm_spa_size;		/* SPA size of the IMM in bytes */
+	unsigned int	imm_max_mem;		/* bytes of mem in IMM */
+
+	/* [0x3A0] boot console, display device and keyboard */
+	struct pz_device mem_cons;	/* description of console device */
+	struct pz_device mem_boot;	/* description of boot device */
+	struct pz_device mem_kbd;	/* description of keyboard device */
+
+	/* [0x430] reserved */
+	int	pad430[116];
+
+	/* [0x600] processor dependent */
+	__u32	pad600[1];
+	__u32	proc_sti;		/* pointer to STI ROM */
+	__u32	pad608[126];
+};
+
+#endif /* __ASSEMBLY__ */
+
+/* Page Zero constant offsets used by the HPMC handler */
+
+#define BOOT_CONSOLE_HPA_OFFSET  0x3c0
+#define BOOT_CONSOLE_SPA_OFFSET  0x3c4
+#define BOOT_CONSOLE_PATH_OFFSET 0x3a8
+
+#ifndef __ASSEMBLY__
+void pdc_console_init(void);	/* in pdc_console.c */
+void pdc_console_restart(void);
+
+void setup_pdc(void);		/* in inventory.c */
+
+/* wrapper-functions from pdc.c */
+
+int pdc_add_valid(unsigned long address);
+int pdc_chassis_info(struct pdc_chassis_info *chassis_info, void *led_info, unsigned long len);
+int pdc_chassis_disp(unsigned long disp);
+int pdc_coproc_cfg(struct pdc_coproc_cfg *pdc_coproc_info);
+int pdc_iodc_read(unsigned long *actcnt, unsigned long hpa, unsigned int index,
+		  void *iodc_data, unsigned int iodc_data_size);
+int pdc_system_map_find_mods(struct pdc_system_map_mod_info *pdc_mod_info,
+			     struct pdc_module_path *mod_path, long mod_index);
+int pdc_system_map_find_addrs(struct pdc_system_map_addr_info *pdc_addr_info, 
+			      long mod_index, long addr_index);
+int pdc_model_info(struct pdc_model *model);
+int pdc_model_sysmodel(char *name);
+int pdc_model_cpuid(unsigned long *cpu_id);
+int pdc_model_versions(unsigned long *versions, int id);
+int pdc_model_capabilities(unsigned long *capabilities);
+int pdc_cache_info(struct pdc_cache_info *cache);
+#ifndef CONFIG_PA20
+int pdc_btlb_info(struct pdc_btlb_info *btlb);
+int pdc_mem_map_hpa(struct pdc_memory_map *r_addr, struct pdc_module_path *mod_path);
+#endif /* !CONFIG_PA20 */
+int pdc_lan_station_id(char *lan_addr, unsigned long net_hpa);
+
+int pdc_stable_read(unsigned long staddr, void *memaddr, unsigned long count);
+int pdc_stable_write(unsigned long staddr, void *memaddr, unsigned long count);
+int pdc_stable_get_size(unsigned long *size);
+int pdc_stable_verify_contents(void);
+int pdc_stable_initialize(void);
+
+int pdc_pci_irt_size(unsigned long *num_entries, unsigned long hpa);
+int pdc_pci_irt(unsigned long num_entries, unsigned long hpa, void *tbl);
+
+int pdc_get_initiator(struct hardware_path *, struct pdc_initiator *);
+int pdc_tod_read(struct pdc_tod *tod);
+int pdc_tod_set(unsigned long sec, unsigned long usec);
+
+#ifdef __LP64__
+int pdc_mem_mem_table(struct pdc_memory_table_raddr *r_addr,
+		struct pdc_memory_table *tbl, unsigned long entries);
+#endif
+
+void set_firmware_width(void);
+int pdc_do_firm_test_reset(unsigned long ftc_bitmap);
+int pdc_do_reset(void);
+int pdc_soft_power_info(unsigned long *power_reg);
+int pdc_soft_power_button(int sw_control);
+void pdc_io_reset(void);
+void pdc_io_reset_devices(void);
+int pdc_iodc_getc(void);
+void pdc_iodc_putc(unsigned char c);
+void pdc_iodc_outc(unsigned char c);
+void pdc_printf(const char *fmt, ...);
+
+void pdc_emergency_unlock(void);
+int pdc_sti_call(unsigned long func, unsigned long flags,
+                 unsigned long inptr, unsigned long outputr,
+                 unsigned long glob_cfg);
+
+extern void pdc_init(void);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _PARISC_PDC_H */