Merge 4.0-rc3 into tty-testing

This resolves a merge issue in drivers/tty/serial/8250/8250_pci.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 files changed, 75 insertions, 52 deletions

diff --git a/include/linux/dma/hsu.h b/include/linux/dma/hsu.h
new file mode 100644
index 000000000000..234393a6997b
--- /dev/null
+++ b/include/linux/dma/hsu.h
@@ -0,0 +1,48 @@
+/*
+ * Driver for the High Speed UART DMA
+ *
+ * Copyright (C) 2015 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _DMA_HSU_H
+#define _DMA_HSU_H
+
+#include <linux/device.h>
+#include <linux/interrupt.h>
+
+#include <linux/platform_data/dma-hsu.h>
+
+struct hsu_dma;
+
+/**
+ * struct hsu_dma_chip - representation of HSU DMA hardware
+ * @dev:		 struct device of the DMA controller
+ * @irq:		 irq line
+ * @regs:		 memory mapped I/O space
+ * @length:		 I/O space length
+ * @offset:		 offset of the I/O space where registers are located
+ * @hsu:		 struct hsu_dma that is filed by ->probe()
+ * @pdata:		 platform data for the DMA controller if provided
+ */
+struct hsu_dma_chip {
+	struct device			*dev;
+	int				irq;
+	void __iomem			*regs;
+	unsigned int			length;
+	unsigned int			offset;
+	struct hsu_dma			*hsu;
+	struct hsu_dma_platform_data	*pdata;
+};
+
+/* Export to the internal users */
+irqreturn_t hsu_dma_irq(struct hsu_dma_chip *chip, unsigned short nr);
+
+/* Export to the platform drivers */
+int hsu_dma_probe(struct hsu_dma_chip *chip);
+int hsu_dma_remove(struct hsu_dma_chip *chip);
+
+#endif /* _DMA_HSU_H */
diff --git a/include/linux/platform_data/dma-hsu.h b/include/linux/platform_data/dma-hsu.h
new file mode 100644
index 000000000000..8a1f6a4920b2
--- /dev/null
+++ b/include/linux/platform_data/dma-hsu.h
@@ -0,0 +1,25 @@
+/*
+ * Driver for the High Speed UART DMA
+ *
+ * Copyright (C) 2015 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _PLATFORM_DATA_DMA_HSU_H
+#define _PLATFORM_DATA_DMA_HSU_H
+
+#include <linux/device.h>
+
+struct hsu_dma_slave {
+	struct device	*dma_dev;
+	int		chan_id;
+};
+
+struct hsu_dma_platform_data {
+	unsigned short	nr_channels;
+};
+
+#endif /* _PLATFORM_DATA_DMA_HSU_H */
diff --git a/include/linux/platform_data/serial-imx.h b/include/linux/platform_data/serial-imx.h
index 3cc2e3c40914..a938eba2f18e 100644
--- a/include/linux/platform_data/serial-imx.h
+++ b/include/linux/platform_data/serial-imx.h
@@ -20,14 +20,9 @@
 #define ASMARM_ARCH_UART_H
 
 #define IMXUART_HAVE_RTSCTS (1<<0)
-#define IMXUART_IRDA        (1<<1)
 
 struct imxuart_platform_data {
 	unsigned int flags;
-	void (*irda_enable)(int enable);
-	unsigned int irda_inv_rx:1;
-	unsigned int irda_inv_tx:1;
-	unsigned short transceiver_delay;
 };
 
 #endif
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index d10965f0d8a4..b0148e7bcbfa 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -354,6 +354,8 @@ early_param("earlycon", name ## _setup_earlycon);
 
 struct uart_port *uart_get_console(struct uart_port *ports, int nr,
 				   struct console *c);
+int uart_parse_earlycon(char *p, unsigned char *iotype, unsigned long *addr,
+			char **options);
 void uart_parse_options(char *options, int *baud, int *parity, int *bits,
 			int *flow);
 int uart_set_options(struct uart_port *port, struct console *co, int baud,
diff --git a/include/linux/serial_mfd.h b/include/linux/serial_mfd.h
deleted file mode 100644
index 2b071e0b034d..000000000000
--- a/include/linux/serial_mfd.h
+++ /dev/null
@@ -1,47 +0,0 @@
-#ifndef _SERIAL_MFD_H_
-#define _SERIAL_MFD_H_
-
-/* HW register offset definition */
-#define UART_FOR	0x08
-#define UART_PS		0x0C
-#define UART_MUL	0x0D
-#define UART_DIV	0x0E
-
-#define HSU_GBL_IEN	0x0
-#define HSU_GBL_IST	0x4
-
-#define HSU_GBL_INT_BIT_PORT0	0x0
-#define HSU_GBL_INT_BIT_PORT1	0x1
-#define HSU_GBL_INT_BIT_PORT2	0x2
-#define HSU_GBL_INT_BIT_IRI	0x3
-#define HSU_GBL_INT_BIT_HDLC	0x4
-#define HSU_GBL_INT_BIT_DMA	0x5
-
-#define HSU_GBL_ISR	0x8
-#define HSU_GBL_DMASR	0x400
-#define HSU_GBL_DMAISR	0x404
-
-#define HSU_PORT_REG_OFFSET	0x80
-#define HSU_PORT0_REG_OFFSET	0x80
-#define HSU_PORT1_REG_OFFSET	0x100
-#define HSU_PORT2_REG_OFFSET	0x180
-#define HSU_PORT_REG_LENGTH	0x80
-
-#define HSU_DMA_CHANS_REG_OFFSET	0x500
-#define HSU_DMA_CHANS_REG_LENGTH	0x40
-
-#define HSU_CH_SR		0x0	/* channel status reg */
-#define HSU_CH_CR		0x4	/* control reg */
-#define HSU_CH_DCR		0x8	/* descriptor control reg */
-#define HSU_CH_BSR		0x10	/* max fifo buffer size reg */
-#define HSU_CH_MOTSR		0x14	/* minimum ocp transfer size */
-#define HSU_CH_D0SAR		0x20	/* desc 0 start addr */
-#define HSU_CH_D0TSR		0x24	/* desc 0 transfer size */
-#define HSU_CH_D1SAR		0x28
-#define HSU_CH_D1TSR		0x2C
-#define HSU_CH_D2SAR		0x30
-#define HSU_CH_D2TSR		0x34
-#define HSU_CH_D3SAR		0x38
-#define HSU_CH_D3TSR		0x3C
-
-#endif