Merge tag 'wireless-next-2024-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v6.9

The second "new features" pull request for v6.9.  Lots of iwlwifi and
stack changes this time. And naturally smaller changes to other drivers.

We also twice merged wireless into wireless-next to avoid conflicts
between the trees.

Major changes:

stack

* mac80211: negotiated TTLM request support

* SPP A-MSDU support

* mac80211: wider bandwidth OFDMA config support

iwlwifi

* kunit tests

* bump FW API to 89 for AX/BZ/SC devices

* enable SPP A-MSDUs

* support for new devices

ath12k

* refactoring in preparation for Multi-Link Operation (MLO) support

* 1024 Block Ack window size support

* provide firmware wmi logs via a trace event

ath11k

* 36 bit DMA mask support

* support 6 GHz station power modes: Low Power Indoor (LPI), Standard
  Power) SP and Very Low Power (VLP)

rtl8xxxu

* TP-Link TL-WN823N V2 support
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 161 insertions, 57 deletions

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 2b54fdd8ca15..57c2298af35b 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -7,7 +7,7 @@
  * Copyright 2006-2010	Johannes Berg <johannes@sipsolutions.net>
  * Copyright 2013-2014 Intel Mobile Communications GmbH
  * Copyright 2015-2017	Intel Deutschland GmbH
- * Copyright (C) 2018-2021, 2023 Intel Corporation
+ * Copyright (C) 2018-2024 Intel Corporation
  */
 
 #include <linux/ethtool.h>
@@ -118,10 +118,13 @@ struct wiphy;
  *	restrictions.
  * @IEEE80211_CHAN_NO_EHT: EHT operation is not permitted on this channel.
  * @IEEE80211_CHAN_DFS_CONCURRENT: See %NL80211_RRF_DFS_CONCURRENT
- * @IEEE80211_CHAN_NO_UHB_VLP_CLIENT: Client connection with VLP AP
+ * @IEEE80211_CHAN_NO_6GHZ_VLP_CLIENT: Client connection with VLP AP
  *	not permitted using this channel
- * @IEEE80211_CHAN_NO_UHB_AFC_CLIENT: Client connection with AFC AP
+ * @IEEE80211_CHAN_NO_6GHZ_AFC_CLIENT: Client connection with AFC AP
  *	not permitted using this channel
+ * @IEEE80211_CHAN_CAN_MONITOR: This channel can be used for monitor
+ *	mode even in the presence of other (regulatory) restrictions,
+ *	even if it is otherwise disabled.
  */
 enum ieee80211_channel_flags {
 	IEEE80211_CHAN_DISABLED		= 1<<0,
@@ -146,8 +149,9 @@ enum ieee80211_channel_flags {
 	IEEE80211_CHAN_NO_320MHZ	= 1<<19,
 	IEEE80211_CHAN_NO_EHT		= 1<<20,
 	IEEE80211_CHAN_DFS_CONCURRENT	= 1<<21,
-	IEEE80211_CHAN_NO_UHB_VLP_CLIENT= 1<<22,
-	IEEE80211_CHAN_NO_UHB_AFC_CLIENT= 1<<23,
+	IEEE80211_CHAN_NO_6GHZ_VLP_CLIENT = 1<<22,
+	IEEE80211_CHAN_NO_6GHZ_AFC_CLIENT = 1<<23,
+	IEEE80211_CHAN_CAN_MONITOR	= 1<<24,
 };
 
 #define IEEE80211_CHAN_NO_HT40 \
@@ -808,6 +812,9 @@ struct key_params {
  *	chan will define the primary channel and all other
  *	parameters are ignored.
  * @freq1_offset: offset from @center_freq1, in KHz
+ * @punctured: mask of the punctured 20 MHz subchannels, with
+ *	bits turned on being disabled (punctured); numbered
+ *	from lower to higher frequency (like in the spec)
  */
 struct cfg80211_chan_def {
 	struct ieee80211_channel *chan;
@@ -816,6 +823,7 @@ struct cfg80211_chan_def {
 	u32 center_freq2;
 	struct ieee80211_edmg edmg;
 	u16 freq1_offset;
+	u16 punctured;
 };
 
 /*
@@ -956,7 +964,8 @@ cfg80211_chandef_identical(const struct cfg80211_chan_def *chandef1,
 		chandef1->width == chandef2->width &&
 		chandef1->center_freq1 == chandef2->center_freq1 &&
 		chandef1->freq1_offset == chandef2->freq1_offset &&
-		chandef1->center_freq2 == chandef2->center_freq2);
+		chandef1->center_freq2 == chandef2->center_freq2 &&
+		chandef1->punctured == chandef2->punctured);
 }
 
 /**
@@ -1048,6 +1057,20 @@ cfg80211_chandef_dfs_cac_time(struct wiphy *wiphy,
 			      const struct cfg80211_chan_def *chandef);
 
 /**
+ * cfg80211_chandef_primary - calculate primary 40/80/160 MHz freq
+ * @chandef: chandef to calculate for
+ * @primary_chan_width: primary channel width to calculate center for
+ * @punctured: punctured sub-channel bitmap, will be recalculated
+ *	according to the new bandwidth, can be %NULL
+ *
+ * Returns: the primary 40/80/160 MHz channel center frequency, or -1
+ *	for errors, updating the punctured bitmap
+ */
+int cfg80211_chandef_primary(const struct cfg80211_chan_def *chandef,
+			     enum nl80211_chan_width primary_chan_width,
+			     u16 *punctured);
+
+/**
  * nl80211_send_chandef - sends the channel definition.
  * @msg: the msg to send channel definition
  * @chandef: the channel definition to check
@@ -1457,9 +1480,6 @@ struct cfg80211_unsol_bcast_probe_resp {
  * @fils_discovery: FILS discovery transmission parameters
  * @unsol_bcast_probe_resp: Unsolicited broadcast probe response parameters
  * @mbssid_config: AP settings for multiple bssid
- * @punct_bitmap: Preamble puncturing bitmap. Each bit represents
- *	a 20 MHz channel, lowest bit corresponding to the lowest channel.
- *	Bit set to 1 indicates that the channel is punctured.
  */
 struct cfg80211_ap_settings {
 	struct cfg80211_chan_def chandef;
@@ -1494,7 +1514,6 @@ struct cfg80211_ap_settings {
 	struct cfg80211_fils_discovery fils_discovery;
 	struct cfg80211_unsol_bcast_probe_resp unsol_bcast_probe_resp;
 	struct cfg80211_mbssid_config mbssid_config;
-	u16 punct_bitmap;
 };
 
 
@@ -1528,9 +1547,8 @@ struct cfg80211_ap_update {
  * @radar_required: whether radar detection is required on the new channel
  * @block_tx: whether transmissions should be blocked while changing
  * @count: number of beacons until switch
- * @punct_bitmap: Preamble puncturing bitmap. Each bit represents
- *	a 20 MHz channel, lowest bit corresponding to the lowest channel.
- *	Bit set to 1 indicates that the channel is punctured.
+ * @link_id: defines the link on which channel switch is expected during
+ *	MLO. 0 in case of non-MLO.
  */
 struct cfg80211_csa_settings {
 	struct cfg80211_chan_def chandef;
@@ -1543,7 +1561,7 @@ struct cfg80211_csa_settings {
 	bool radar_required;
 	bool block_tx;
 	u8 count;
-	u16 punct_bitmap;
+	u8 link_id;
 };
 
 /**
@@ -1766,11 +1784,15 @@ struct station_parameters {
  * @subtype: Management frame subtype to use for indicating removal
  *	(10 = Disassociation, 12 = Deauthentication)
  * @reason_code: Reason code for the Disassociation/Deauthentication frame
+ * @link_id: Link ID indicating a link that stations to be flushed must be
+ *	using; valid only for MLO, but can also be -1 for MLO to really
+ *	remove all stations.
  */
 struct station_del_parameters {
 	const u8 *mac;
 	u8 subtype;
 	u16 reason_code;
+	int link_id;
 };
 
 /**
@@ -2695,19 +2717,11 @@ static inline void get_random_mask_addr(u8 *buf, const u8 *addr, const u8 *mask)
  * @bssid: BSSID to be matched; may be all-zero BSSID in case of SSID match
  *	or no match (RSSI only)
  * @rssi_thold: don't report scan results below this threshold (in s32 dBm)
- * @per_band_rssi_thold: Minimum rssi threshold for each band to be applied
- *	for filtering out scan results received. Drivers advertise this support
- *	of band specific rssi based filtering through the feature capability
- *	%NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD. These band
- *	specific rssi thresholds take precedence over rssi_thold, if specified.
- *	If not specified for any band, it will be assigned with rssi_thold of
- *	corresponding matchset.
  */
 struct cfg80211_match_set {
 	struct cfg80211_ssid ssid;
 	u8 bssid[ETH_ALEN];
 	s32 rssi_thold;
-	s32 per_band_rssi_thold[NUM_NL80211_BANDS];
 };
 
 /**
@@ -3063,6 +3077,7 @@ struct cfg80211_assoc_link {
  * @CONNECT_REQ_MLO_SUPPORT: Userspace indicates support for handling MLD links.
  *	Drivers shall disable MLO features for the current association if this
  *	flag is not set.
+ * @ASSOC_REQ_SPP_AMSDU: SPP A-MSDUs will be used on this connection (if any)
  */
 enum cfg80211_assoc_req_flags {
 	ASSOC_REQ_DISABLE_HT			= BIT(0),
@@ -3072,6 +3087,7 @@ enum cfg80211_assoc_req_flags {
 	ASSOC_REQ_DISABLE_HE			= BIT(4),
 	ASSOC_REQ_DISABLE_EHT			= BIT(5),
 	CONNECT_REQ_MLO_SUPPORT			= BIT(6),
+	ASSOC_REQ_SPP_AMSDU			= BIT(7),
 };
 
 /**
@@ -3596,12 +3612,15 @@ struct cfg80211_wowlan_nd_info {
  * @tcp_connlost: TCP connection lost or failed to establish
  * @tcp_nomoretokens: TCP data ran out of tokens
  * @net_detect: if not %NULL, woke up because of net detect
+ * @unprot_deauth_disassoc: woke up due to unprotected deauth or
+ *	disassoc frame (in MFP).
  */
 struct cfg80211_wowlan_wakeup {
 	bool disconnect, magic_pkt, gtk_rekey_failure,
 	     eap_identity_req, four_way_handshake,
 	     rfkill_release, packet_80211,
-	     tcp_match, tcp_connlost, tcp_nomoretokens;
+	     tcp_match, tcp_connlost, tcp_nomoretokens,
+	     unprot_deauth_disassoc;
 	s32 pattern_idx;
 	u32 packet_present_len, packet_len;
 	const void *packet;
@@ -4923,7 +4942,7 @@ struct cfg80211_ops {
  * enum wiphy_flags - wiphy capability flags
  *
  * @WIPHY_FLAG_SPLIT_SCAN_6GHZ: if set to true, the scan request will be split
- *	 into two, first for legacy bands and second for UHB.
+ *	 into two, first for legacy bands and second for 6 GHz.
  * @WIPHY_FLAG_NETNS_OK: if not set, do not allow changing the netns of this
  *	wiphy at all
  * @WIPHY_FLAG_PS_ON_BY_DEFAULT: if set to true, powersave will be enabled
@@ -6204,7 +6223,7 @@ struct wireless_dev {
 			int beacon_interval;
 			struct cfg80211_chan_def preset_chandef;
 			struct cfg80211_chan_def chandef;
-			u8 id[IEEE80211_MAX_SSID_LEN];
+			u8 id[IEEE80211_MAX_MESH_ID_LEN];
 			u8 id_len, id_up_len;
 		} mesh;
 		struct {
@@ -8733,14 +8752,13 @@ bool cfg80211_reg_can_beacon_relax(struct wiphy *wiphy,
  * @dev: the device which switched channels
  * @chandef: the new channel definition
  * @link_id: the link ID for MLO, must be 0 for non-MLO
- * @punct_bitmap: the new puncturing bitmap
  *
  * Caller must hold wiphy mutex, therefore must only be called from sleepable
  * driver context!
  */
 void cfg80211_ch_switch_notify(struct net_device *dev,
 			       struct cfg80211_chan_def *chandef,
-			       unsigned int link_id, u16 punct_bitmap);
+			       unsigned int link_id);
 
 /*
  * cfg80211_ch_switch_started_notify - notify channel switch start
@@ -8749,7 +8767,6 @@ void cfg80211_ch_switch_notify(struct net_device *dev,
  * @link_id: the link ID for MLO, must be 0 for non-MLO
  * @count: the number of TBTTs until the channel switch happens
  * @quiet: whether or not immediate quiet was requested by the AP
- * @punct_bitmap: the future puncturing bitmap
  *
  * Inform the userspace about the channel switch that has just
  * started, so that it can take appropriate actions (eg. starting
@@ -8758,7 +8775,7 @@ void cfg80211_ch_switch_notify(struct net_device *dev,
 void cfg80211_ch_switch_started_notify(struct net_device *dev,
 				       struct cfg80211_chan_def *chandef,
 				       unsigned int link_id, u8 count,
-				       bool quiet, u16 punct_bitmap);
+				       bool quiet);
 
 /**
  * ieee80211_operating_class_to_band - convert operating class to band
@@ -8772,6 +8789,19 @@ bool ieee80211_operating_class_to_band(u8 operating_class,
 				       enum nl80211_band *band);
 
 /**
+ * ieee80211_operating_class_to_chandef - convert operating class to chandef
+ *
+ * @operating_class: the operating class to convert
+ * @chan: the ieee80211_channel to convert
+ * @chandef: a pointer to the resulting chandef
+ *
+ * Returns %true if the conversion was successful, %false otherwise.
+ */
+bool ieee80211_operating_class_to_chandef(u8 operating_class,
+					  struct ieee80211_channel *chan,
+					  struct cfg80211_chan_def *chandef);
+
+/**
  * ieee80211_chandef_to_operating_class - convert chandef to operation class
  *
  * @chandef: the chandef to convert
@@ -9377,18 +9407,6 @@ static inline int cfg80211_color_change_notify(struct net_device *dev)
 }
 
 /**
- * cfg80211_valid_disable_subchannel_bitmap - validate puncturing bitmap
- * @bitmap: bitmap to be validated
- * @chandef: channel definition
- *
- * Validate the puncturing bitmap.
- *
- * Return: %true if the bitmap is valid. %false otherwise.
- */
-bool cfg80211_valid_disable_subchannel_bitmap(u16 *bitmap,
-					      const struct cfg80211_chan_def *chandef);
-
-/**
  * cfg80211_links_removed - Notify about removed STA MLD setup links.
  * @dev: network device.
  * @link_mask: BIT mask of removed STA MLD setup link IDs.
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index d400fe2e8668..fc223761e3af 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -7,7 +7,7 @@
  * Copyright 2007-2010	Johannes Berg <johannes@sipsolutions.net>
  * Copyright 2013-2014  Intel Mobile Communications GmbH
  * Copyright (C) 2015 - 2017 Intel Deutschland GmbH
- * Copyright (C) 2018 - 2023 Intel Corporation
+ * Copyright (C) 2018 - 2024 Intel Corporation
  */
 
 #ifndef MAC80211_H
@@ -214,6 +214,10 @@ struct ieee80211_low_level_stats {
  * @IEEE80211_CHANCTX_CHANGE_CHANNEL: switched to another operating channel,
  *	this is used only with channel switching with CSA
  * @IEEE80211_CHANCTX_CHANGE_MIN_WIDTH: The min required channel width changed
+ * @IEEE80211_CHANCTX_CHANGE_AP: The AP channel definition changed, so (wider
+ *	bandwidth) OFDMA settings need to be changed
+ * @IEEE80211_CHANCTX_CHANGE_PUNCTURING: The punctured channel(s) bitmap
+ *	was changed.
  */
 enum ieee80211_chanctx_change {
 	IEEE80211_CHANCTX_CHANGE_WIDTH		= BIT(0),
@@ -221,6 +225,19 @@ enum ieee80211_chanctx_change {
 	IEEE80211_CHANCTX_CHANGE_RADAR		= BIT(2),
 	IEEE80211_CHANCTX_CHANGE_CHANNEL	= BIT(3),
 	IEEE80211_CHANCTX_CHANGE_MIN_WIDTH	= BIT(4),
+	IEEE80211_CHANCTX_CHANGE_AP		= BIT(5),
+	IEEE80211_CHANCTX_CHANGE_PUNCTURING	= BIT(6),
+};
+
+/**
+ * struct ieee80211_chan_req - A channel "request"
+ * @oper: channel definition to use for operation
+ * @ap: the channel definition of the AP, if any
+ *	(otherwise the chan member is %NULL)
+ */
+struct ieee80211_chan_req {
+	struct cfg80211_chan_def oper;
+	struct cfg80211_chan_def ap;
 };
 
 /**
@@ -231,6 +248,8 @@ enum ieee80211_chanctx_change {
  *
  * @def: the channel definition
  * @min_def: the minimum channel definition currently required.
+ * @ap: the channel definition the AP actually is operating as,
+ *	for use with (wider bandwidth) OFDMA
  * @rx_chains_static: The number of RX chains that must always be
  *	active on the channel to receive MIMO transmissions
  * @rx_chains_dynamic: The number of RX chains that must be enabled
@@ -243,6 +262,7 @@ enum ieee80211_chanctx_change {
 struct ieee80211_chanctx_conf {
 	struct cfg80211_chan_def def;
 	struct cfg80211_chan_def min_def;
+	struct cfg80211_chan_def ap;
 
 	u8 rx_chains_static, rx_chains_dynamic;
 
@@ -340,8 +360,8 @@ struct ieee80211_vif_chanctx_switch {
  * @BSS_CHANGED_FILS_DISCOVERY: FILS discovery status changed.
  * @BSS_CHANGED_UNSOL_BCAST_PROBE_RESP: Unsolicited broadcast probe response
  *	status changed.
- * @BSS_CHANGED_EHT_PUNCTURING: The channel puncturing bitmap changed.
  * @BSS_CHANGED_MLD_VALID_LINKS: MLD valid links status changed.
+ * @BSS_CHANGED_MLD_TTLM: TID to link mapping was changed
  */
 enum ieee80211_bss_change {
 	BSS_CHANGED_ASSOC		= 1<<0,
@@ -376,8 +396,8 @@ enum ieee80211_bss_change {
 	BSS_CHANGED_HE_BSS_COLOR	= 1<<29,
 	BSS_CHANGED_FILS_DISCOVERY      = 1<<30,
 	BSS_CHANGED_UNSOL_BCAST_PROBE_RESP = 1<<31,
-	BSS_CHANGED_EHT_PUNCTURING	= BIT_ULL(32),
 	BSS_CHANGED_MLD_VALID_LINKS	= BIT_ULL(33),
+	BSS_CHANGED_MLD_TTLM		= BIT_ULL(34),
 
 	/* when adding here, make sure to change ieee80211_reconfig */
 };
@@ -581,7 +601,7 @@ struct ieee80211_fils_discovery {
  * @mcast_rate: per-band multicast rate index + 1 (0: disabled)
  * @bssid: The BSSID for this BSS
  * @enable_beacon: whether beaconing should be enabled or not
- * @chandef: Channel definition for this BSS -- the hardware might be
+ * @chanreq: Channel request for this BSS -- the hardware might be
  *	configured a higher bandwidth than this BSS uses, for example.
  * @mu_group: VHT MU-MIMO group membership data
  * @ht_operation_mode: HT operation mode like in &struct ieee80211_ht_operation.
@@ -642,9 +662,7 @@ struct ieee80211_fils_discovery {
  * @tx_pwr_env_num: number of @tx_pwr_env.
  * @pwr_reduction: power constraint of BSS.
  * @eht_support: does this BSS support EHT
- * @eht_puncturing: bitmap to indicate which channels are punctured in this BSS
  * @csa_active: marks whether a channel switch is going on.
- * @csa_punct_bitmap: new puncturing bitmap for channel switch
  * @mu_mimo_owner: indicates interface owns MU-MIMO capability
  * @chanctx_conf: The channel context this interface is assigned to, or %NULL
  *	when it is not assigned. This pointer is RCU-protected due to the TX
@@ -714,7 +732,7 @@ struct ieee80211_bss_conf {
 	u32 cqm_rssi_hyst;
 	s32 cqm_rssi_low;
 	s32 cqm_rssi_high;
-	struct cfg80211_chan_def chandef;
+	struct ieee80211_chan_req chanreq;
 	struct ieee80211_mu_group_data mu_group;
 	bool qos;
 	bool hidden_ssid;
@@ -747,10 +765,8 @@ struct ieee80211_bss_conf {
 	u8 tx_pwr_env_num;
 	u8 pwr_reduction;
 	bool eht_support;
-	u16 eht_puncturing;
 
 	bool csa_active;
-	u16 csa_punct_bitmap;
 
 	bool mu_mimo_owner;
 	struct ieee80211_chanctx_conf __rcu *chanctx_conf;
@@ -1772,6 +1788,10 @@ struct ieee80211_channel_switch {
  *	this is not pure P2P vif.
  * @IEEE80211_VIF_EML_ACTIVE: The driver indicates that EML operation is
  *      enabled for the interface.
+ * @IEEE80211_VIF_IGNORE_OFDMA_WIDER_BW: Ignore wider bandwidth OFDMA
+ *	operation on this interface and request a channel context without
+ *	the AP definition. Use this e.g. because the device is able to
+ *	handle OFDMA (downlink and trigger for uplink) on a per-AP basis.
  */
 enum ieee80211_vif_flags {
 	IEEE80211_VIF_BEACON_FILTER		= BIT(0),
@@ -1779,6 +1799,7 @@ enum ieee80211_vif_flags {
 	IEEE80211_VIF_SUPPORTS_UAPSD		= BIT(2),
 	IEEE80211_VIF_GET_NOA_UPDATE		= BIT(3),
 	IEEE80211_VIF_EML_ACTIVE	        = BIT(4),
+	IEEE80211_VIF_IGNORE_OFDMA_WIDER_BW	= BIT(5),
 };
 
 
@@ -1808,9 +1829,11 @@ enum ieee80211_offload_flags {
  * @ps: power-save mode (STA only). This flag is NOT affected by
  *	offchannel/dynamic_ps operations.
  * @aid: association ID number, valid only when @assoc is true
- * @eml_cap: EML capabilities as described in P802.11be_D2.2 Figure 9-1002k.
+ * @eml_cap: EML capabilities as described in P802.11be_D4.1 Figure 9-1001j.
  * @eml_med_sync_delay: Medium Synchronization delay as described in
- *	P802.11be_D2.2 Figure 9-1002j.
+ *	P802.11be_D4.1 Figure 9-1001i.
+ * @mld_capa_op: MLD Capabilities and Operations per P802.11be_D4.1
+ *	Figure 9-1001k
  * @arp_addr_list: List of IPv4 addresses for hardware ARP filtering. The
  *	may filter ARP queries targeted for other addresses than listed here.
  *	The driver must allow ARP queries targeted for all address listed here
@@ -1835,6 +1858,7 @@ struct ieee80211_vif_cfg {
 	u16 aid;
 	u16 eml_cap;
 	u16 eml_med_sync_delay;
+	u16 mld_capa_op;
 
 	__be32 arp_addr_list[IEEE80211_BSS_ARP_ADDR_LIST_LEN];
 	int arp_addr_cnt;
@@ -1845,6 +1869,35 @@ struct ieee80211_vif_cfg {
 	u8 ap_addr[ETH_ALEN] __aligned(2);
 };
 
+#define IEEE80211_TTLM_NUM_TIDS 8
+
+/**
+ * struct ieee80211_neg_ttlm - negotiated TID to link map info
+ *
+ * @downlink: bitmap of active links per TID for downlink, or 0 if mapping for
+ *	this TID is not included.
+ * @uplink: bitmap of active links per TID for uplink, or 0 if mapping for this
+ *	TID is not included.
+ * @valid: info is valid or not.
+ */
+struct ieee80211_neg_ttlm {
+	u16 downlink[IEEE80211_TTLM_NUM_TIDS];
+	u16 uplink[IEEE80211_TTLM_NUM_TIDS];
+	bool valid;
+};
+
+/**
+ * enum ieee80211_neg_ttlm_res - return value for negotiated TTLM handling
+ * @NEG_TTLM_RES_ACCEPT: accept the request
+ * @NEG_TTLM_RES_REJECT: reject the request
+ * @NEG_TTLM_RES_SUGGEST_PREFERRED: reject and suggest a new mapping
+ */
+enum ieee80211_neg_ttlm_res {
+	NEG_TTLM_RES_ACCEPT,
+	NEG_TTLM_RES_REJECT,
+	NEG_TTLM_RES_SUGGEST_PREFERRED
+};
+
 /**
  * struct ieee80211_vif - per-interface data
  *
@@ -1863,6 +1916,11 @@ struct ieee80211_vif_cfg {
  *	API calls meant for that purpose.
  * @dormant_links: bitmap of valid but disabled links, or 0 for non-MLO.
  *	Must be a subset of valid_links.
+ * @suspended_links: subset of dormant_links representing links that are
+ *	suspended.
+ *	0 for non-MLO.
+ * @neg_ttlm: negotiated TID to link mapping info.
+ *	see &struct ieee80211_neg_ttlm.
  * @addr: address of this interface
  * @p2p: indicates whether this AP or STA interface is a p2p
  *	interface, i.e. a GO or p2p-sta respectively
@@ -1900,7 +1958,8 @@ struct ieee80211_vif {
 	struct ieee80211_vif_cfg cfg;
 	struct ieee80211_bss_conf bss_conf;
 	struct ieee80211_bss_conf __rcu *link_conf[IEEE80211_MLD_MAX_NUM_LINKS];
-	u16 valid_links, active_links, dormant_links;
+	u16 valid_links, active_links, dormant_links, suspended_links;
+	struct ieee80211_neg_ttlm neg_ttlm;
 	u8 addr[ETH_ALEN] __aligned(2);
 	bool p2p;
 
@@ -2041,6 +2100,8 @@ static inline bool lockdep_vif_wiphy_mutex_held(struct ieee80211_vif *vif)
  * @IEEE80211_KEY_FLAG_GENERATE_MMIE: This flag should be set by the driver
  *	for a AES_CMAC key to indicate that it requires sequence number
  *	generation only
+ * @IEEE80211_KEY_FLAG_SPP_AMSDU: SPP A-MSDUs can be used with this key
+ *	(set by mac80211 from the sta->spp_amsdu flag)
  */
 enum ieee80211_key_flags {
 	IEEE80211_KEY_FLAG_GENERATE_IV_MGMT	= BIT(0),
@@ -2054,6 +2115,7 @@ enum ieee80211_key_flags {
 	IEEE80211_KEY_FLAG_PUT_MIC_SPACE	= BIT(8),
 	IEEE80211_KEY_FLAG_NO_AUTO_TX		= BIT(9),
 	IEEE80211_KEY_FLAG_GENERATE_MMIE	= BIT(10),
+	IEEE80211_KEY_FLAG_SPP_AMSDU		= BIT(11),
 };
 
 /**
@@ -2352,6 +2414,7 @@ struct ieee80211_link_sta {
  *	would be assigned to link[link_id] where link_id is the id assigned
  *	by the AP.
  * @valid_links: bitmap of valid links, or 0 for non-MLO
+ * @spp_amsdu: indicates whether the STA uses SPP A-MSDU or not.
  */
 struct ieee80211_sta {
 	u8 addr[ETH_ALEN];
@@ -2365,6 +2428,7 @@ struct ieee80211_sta {
 	bool tdls_initiator;
 	bool mfp;
 	bool mlo;
+	bool spp_amsdu;
 	u8 max_amsdu_subframes;
 
 	struct ieee80211_sta_aggregates *cur;
@@ -4293,6 +4357,10 @@ struct ieee80211_prep_tx_info {
  *	flow offloading for flows originating from the vif.
  *	Note that the driver must not assume that the vif driver_data is valid
  *	at this point, since the callback can be called during netdev teardown.
+ * @can_neg_ttlm: for managed interface, requests the driver to determine
+ *	if the requested TID-To-Link mapping can be accepted or not.
+ *	If it's not accepted the driver may suggest a preferred mapping and
+ *	modify @ttlm parameter with the suggested TID-to-Link mapping.
  */
 struct ieee80211_ops {
 	void (*tx)(struct ieee80211_hw *hw,
@@ -4673,6 +4741,9 @@ struct ieee80211_ops {
 			    struct net_device *dev,
 			    enum tc_setup_type type,
 			    void *type_data);
+	enum ieee80211_neg_ttlm_res
+	(*can_neg_ttlm)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+			struct ieee80211_neg_ttlm *ttlm);
 };
 
 /**
@@ -5455,6 +5526,7 @@ static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
 /**
  * ieee80211_beacon_update_cntdwn - request mac80211 to decrement the beacon countdown
  * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @link_id: valid link_id during MLO or 0 for non-MLO
  *
  * The beacon counter should be updated after each beacon transmission.
  * This function is called implicitly when
@@ -5464,7 +5536,8 @@ static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
  *
  * Return: new countdown value
  */
-u8 ieee80211_beacon_update_cntdwn(struct ieee80211_vif *vif);
+u8 ieee80211_beacon_update_cntdwn(struct ieee80211_vif *vif,
+				  unsigned int link_id);
 
 /**
  * ieee80211_beacon_set_cntdwn - request mac80211 to set beacon countdown
@@ -5482,12 +5555,13 @@ void ieee80211_beacon_set_cntdwn(struct ieee80211_vif *vif, u8 counter);
 /**
  * ieee80211_csa_finish - notify mac80211 about channel switch
  * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @link_id: valid link_id during MLO or 0 for non-MLO
  *
  * After a channel switch announcement was scheduled and the counter in this
  * announcement hits 1, this function must be called by the driver to
  * notify mac80211 that the channel can be changed.
  */
-void ieee80211_csa_finish(struct ieee80211_vif *vif);
+void ieee80211_csa_finish(struct ieee80211_vif *vif, unsigned int link_id);
 
 /**
  * ieee80211_beacon_cntdwn_is_complete - find out if countdown reached 1
@@ -7416,11 +7490,10 @@ ieee80211_get_unsol_bcast_probe_resp_tmpl(struct ieee80211_hw *hw,
  * @vif: &struct ieee80211_vif pointer from the add_interface callback.
  * @color_bitmap: a 64 bit bitmap representing the colors that the local BSS is
  *	aware of.
- * @gfp: allocation flags
  */
 void
 ieee80211_obss_color_collision_notify(struct ieee80211_vif *vif,
-				      u64 color_bitmap, gfp_t gfp);
+				      u64 color_bitmap);
 
 /**
  * ieee80211_is_tx_data - check if frame is a data frame
@@ -7480,4 +7553,17 @@ int ieee80211_set_active_links(struct ieee80211_vif *vif, u16 active_links);
 void ieee80211_set_active_links_async(struct ieee80211_vif *vif,
 				      u16 active_links);
 
+/* for older drivers - let's not document these ... */
+int ieee80211_emulate_add_chanctx(struct ieee80211_hw *hw,
+				  struct ieee80211_chanctx_conf *ctx);
+void ieee80211_emulate_remove_chanctx(struct ieee80211_hw *hw,
+				      struct ieee80211_chanctx_conf *ctx);
+void ieee80211_emulate_change_chanctx(struct ieee80211_hw *hw,
+				      struct ieee80211_chanctx_conf *ctx,
+				      u32 changed);
+int ieee80211_emulate_switch_vif_chanctx(struct ieee80211_hw *hw,
+					 struct ieee80211_vif_chanctx_switch *vifs,
+					 int n_vifs,
+					 enum ieee80211_chanctx_switch_mode mode);
+
 #endif /* MAC80211_H */