summaryrefslogtreecommitdiffstats
path: root/include/sound/soc-dapm.h
diff options
context:
space:
mode:
authorLars-Peter Clausen <lars@metafoo.de>2013-07-24 15:27:37 +0200
committerMark Brown <broonie@linaro.org>2013-07-24 14:56:19 +0100
commitce6cfaf1de136cd3e6ed7c0ed984be8d003a58c1 (patch)
tree1201b2e11688904d7f6c58f8202e757110f17b32 /include/sound/soc-dapm.h
parentc3f48ae6fd5a1ebdcaff5efe35f88f31daaee225 (diff)
downloadlinux-ce6cfaf1de136cd3e6ed7c0ed984be8d003a58c1.tar.gz
linux-ce6cfaf1de136cd3e6ed7c0ed984be8d003a58c1.tar.bz2
linux-ce6cfaf1de136cd3e6ed7c0ed984be8d003a58c1.zip
ASoC: dapm: Run widget updates for shared controls at the same time
Currently when updating a control that is shared between multiple widgets the whole power-up/power-down sequence is being run once for each widget. The control register is updated during the first run, which means the CODEC internal routing is also updated for all widgets during this first run. The input and output paths for each widgets are only updated though during the respective run for that widget. This leads to a slight inconsistency between the CODEC's internal state and ASoC's state, which causes non optimal behavior in regard to click and pop avoidance. E.g. consider the following setup where two MUXs share the same control. +------+ A1 ------| | | MUX1 |----- C1 B1 ------| | +------+ | control ---+ | +------+ A2 ------| | | MUX2 |----- C2 B2 ------| | +------+ If the control is updated to switch the MUXs from input A to input B with the current code the power-up/power-down sequence will look like this: Run soc_dapm_mux_update_power for MUX1 Power-down A1 Update MUXing Power-up B1 Run soc_dapm_mux_update_power for MUX2 Power-down A2 (Update MUXing) Power-up B2 Note that the second 'Update Muxing' is a no-op, since the register was already updated. While the preferred order for avoiding pops and clicks should be: Run soc_dapm_mux_update_power for control Power-down A1 Power-down A2 Update MUXing Power-up B1 Power-up B2 This patch changes the behavior to the later by running the updates for all widgets that the control is attached to at the same time. The new code is also a bit simpler since callers of soc_dapm_{mux,muxer}_update_power don't have to loop over each widget anymore and neither do we need to keep track for which of the kcontrol's widgets the current update is. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
Diffstat (limited to 'include/sound/soc-dapm.h')
-rw-r--r--include/sound/soc-dapm.h7
1 files changed, 3 insertions, 4 deletions
diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h
index 3e479f4e15f5..3717ad089486 100644
--- a/include/sound/soc-dapm.h
+++ b/include/sound/soc-dapm.h
@@ -391,10 +391,10 @@ void snd_soc_dapm_stream_event(struct snd_soc_pcm_runtime *rtd, int stream,
void snd_soc_dapm_shutdown(struct snd_soc_card *card);
/* external DAPM widget events */
-int snd_soc_dapm_mixer_update_power(struct snd_soc_dapm_widget *widget,
+int snd_soc_dapm_mixer_update_power(struct snd_soc_dapm_context *dapm,
struct snd_kcontrol *kcontrol, int connect);
-int snd_soc_dapm_mux_update_power(struct snd_soc_dapm_widget *widget,
- struct snd_kcontrol *kcontrol, int mux, struct soc_enum *e);
+int snd_soc_dapm_mux_update_power(struct snd_soc_dapm_context *dapm,
+ struct snd_kcontrol *kcontrol, int mux, struct soc_enum *e);
/* dapm sys fs - used by the core */
int snd_soc_dapm_sys_add(struct device *dev);
@@ -559,7 +559,6 @@ struct snd_soc_dapm_widget {
};
struct snd_soc_dapm_update {
- struct snd_soc_dapm_widget *widget;
struct snd_kcontrol *kcontrol;
int reg;
int mask;