summaryrefslogtreecommitdiffstats
path: root/include
diff options
context:
space:
mode:
authorDavid S. Miller <davem@davemloft.net>2017-04-28 14:41:15 -0400
committerDavid S. Miller <davem@davemloft.net>2017-04-28 14:41:15 -0400
commitcec381919818a9a0cb85600b3c82404bdd38cf36 (patch)
treebd6bbd9b5d777ed223476d5f7304d6197413a543 /include
parent2d2ab658d2debcb4c0e29c9e6f18e5683f3077bf (diff)
parentb34939b9836950d261610132853311054b507247 (diff)
downloadlinux-cec381919818a9a0cb85600b3c82404bdd38cf36.tar.gz
linux-cec381919818a9a0cb85600b3c82404bdd38cf36.tar.bz2
linux-cec381919818a9a0cb85600b3c82404bdd38cf36.zip
Merge tag 'mac80211-next-for-davem-2017-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says: ==================== Another set of patches for -next: * API support for concurrent scheduled scan requests * API changes for roaming reporting * BSS max idle support in mac80211 * API changes for TX status reporting in mac80211 * API changes for RX rate reporting in mac80211 * rewrite monitor logic to prepare for BPF filters * bugfix for rare devices without 2.4 GHz support * a bugfix for recent DFS changes * some further cleanups The API changes are actually at a nice time, since it's typically quiet just before the merge window, and trees can be synchronized easily during it. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'include')
-rw-r--r--include/linux/ieee80211.h67
-rw-r--r--include/net/cfg80211.h105
-rw-r--r--include/net/mac80211.h172
-rw-r--r--include/uapi/linux/nl80211.h16
4 files changed, 230 insertions, 130 deletions
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 294fa6273a62..69033353d0d1 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -7,7 +7,7 @@
* Copyright (c) 2005, Devicescape Software, Inc.
* Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
* Copyright (c) 2013 - 2014 Intel Mobile Communications GmbH
- * Copyright (c) 2016 Intel Deutschland GmbH
+ * Copyright (c) 2016 - 2017 Intel Deutschland GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -2177,37 +2177,37 @@ enum ieee80211_tdls_actioncode {
#define WLAN_BSS_COEX_INFORMATION_REQUEST BIT(0)
/**
- * enum - mesh synchronization method identifier
+ * enum ieee80211_mesh_sync_method - mesh synchronization method identifier
*
* @IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET: the default synchronization method
* @IEEE80211_SYNC_METHOD_VENDOR: a vendor specific synchronization method
* that will be specified in a vendor specific information element
*/
-enum {
+enum ieee80211_mesh_sync_method {
IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET = 1,
IEEE80211_SYNC_METHOD_VENDOR = 255,
};
/**
- * enum - mesh path selection protocol identifier
+ * enum ieee80211_mesh_path_protocol - mesh path selection protocol identifier
*
* @IEEE80211_PATH_PROTOCOL_HWMP: the default path selection protocol
* @IEEE80211_PATH_PROTOCOL_VENDOR: a vendor specific protocol that will
* be specified in a vendor specific information element
*/
-enum {
+enum ieee80211_mesh_path_protocol {
IEEE80211_PATH_PROTOCOL_HWMP = 1,
IEEE80211_PATH_PROTOCOL_VENDOR = 255,
};
/**
- * enum - mesh path selection metric identifier
+ * enum ieee80211_mesh_path_metric - mesh path selection metric identifier
*
* @IEEE80211_PATH_METRIC_AIRTIME: the default path selection metric
* @IEEE80211_PATH_METRIC_VENDOR: a vendor specific metric that will be
* specified in a vendor specific information element
*/
-enum {
+enum ieee80211_mesh_path_metric {
IEEE80211_PATH_METRIC_AIRTIME = 1,
IEEE80211_PATH_METRIC_VENDOR = 255,
};
@@ -2316,6 +2316,32 @@ struct ieee80211_timeout_interval_ie {
__le32 value;
} __packed;
+/**
+ * enum ieee80211_idle_options - BSS idle options
+ * @WLAN_IDLE_OPTIONS_PROTECTED_KEEP_ALIVE: the station should send an RSN
+ * protected frame to the AP to reset the idle timer at the AP for
+ * the station.
+ */
+enum ieee80211_idle_options {
+ WLAN_IDLE_OPTIONS_PROTECTED_KEEP_ALIVE = BIT(0),
+};
+
+/**
+ * struct ieee80211_bss_max_idle_period_ie
+ *
+ * This structure refers to "BSS Max idle period element"
+ *
+ * @max_idle_period: indicates the time period during which a station can
+ * refrain from transmitting frames to its associated AP without being
+ * disassociated. In units of 1000 TUs.
+ * @idle_options: indicates the options associated with the BSS idle capability
+ * as specified in &enum ieee80211_idle_options.
+ */
+struct ieee80211_bss_max_idle_period_ie {
+ __le16 max_idle_period;
+ u8 idle_options;
+} __packed;
+
/* BACK action code */
enum ieee80211_back_actioncode {
WLAN_ACTION_ADDBA_REQ = 0,
@@ -2356,18 +2382,21 @@ enum ieee80211_sa_query_action {
#define WLAN_CIPHER_SUITE_SMS4 SUITE(0x001472, 1)
/* AKM suite selectors */
-#define WLAN_AKM_SUITE_8021X SUITE(0x000FAC, 1)
-#define WLAN_AKM_SUITE_PSK SUITE(0x000FAC, 2)
-#define WLAN_AKM_SUITE_FT_PSK SUITE(0x000FAC, 4)
-#define WLAN_AKM_SUITE_8021X_SHA256 SUITE(0x000FAC, 5)
-#define WLAN_AKM_SUITE_PSK_SHA256 SUITE(0x000FAC, 6)
-#define WLAN_AKM_SUITE_TDLS SUITE(0x000FAC, 7)
-#define WLAN_AKM_SUITE_SAE SUITE(0x000FAC, 8)
-#define WLAN_AKM_SUITE_FT_OVER_SAE SUITE(0x000FAC, 9)
-#define WLAN_AKM_SUITE_FILS_SHA256 SUITE(0x000FAC, 14)
-#define WLAN_AKM_SUITE_FILS_SHA384 SUITE(0x000FAC, 15)
-#define WLAN_AKM_SUITE_FT_FILS_SHA256 SUITE(0x000FAC, 16)
-#define WLAN_AKM_SUITE_FT_FILS_SHA384 SUITE(0x000FAC, 17)
+#define WLAN_AKM_SUITE_8021X SUITE(0x000FAC, 1)
+#define WLAN_AKM_SUITE_PSK SUITE(0x000FAC, 2)
+#define WLAN_AKM_SUITE_FT_8021X SUITE(0x000FAC, 3)
+#define WLAN_AKM_SUITE_FT_PSK SUITE(0x000FAC, 4)
+#define WLAN_AKM_SUITE_8021X_SHA256 SUITE(0x000FAC, 5)
+#define WLAN_AKM_SUITE_PSK_SHA256 SUITE(0x000FAC, 6)
+#define WLAN_AKM_SUITE_TDLS SUITE(0x000FAC, 7)
+#define WLAN_AKM_SUITE_SAE SUITE(0x000FAC, 8)
+#define WLAN_AKM_SUITE_FT_OVER_SAE SUITE(0x000FAC, 9)
+#define WLAN_AKM_SUITE_8021X_SUITE_B SUITE(0x000FAC, 11)
+#define WLAN_AKM_SUITE_8021X_SUITE_B_192 SUITE(0x000FAC, 12)
+#define WLAN_AKM_SUITE_FILS_SHA256 SUITE(0x000FAC, 14)
+#define WLAN_AKM_SUITE_FILS_SHA384 SUITE(0x000FAC, 15)
+#define WLAN_AKM_SUITE_FT_FILS_SHA256 SUITE(0x000FAC, 16)
+#define WLAN_AKM_SUITE_FT_FILS_SHA384 SUITE(0x000FAC, 17)
#define WLAN_MAX_KEY_LEN 32
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 2a200b964b7a..6e90f1a4950f 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1613,11 +1613,15 @@ static inline void get_random_mask_addr(u8 *buf, const u8 *addr, const u8 *mask)
/**
* struct cfg80211_match_set - sets of attributes to match
*
- * @ssid: SSID to be matched; may be zero-length for no match (RSSI only)
+ * @ssid: SSID to be matched; may be zero-length in case of BSSID match
+ * or no match (RSSI only)
+ * @bssid: BSSID to be matched; may be all-zero BSSID in case of SSID match
+ * or no match (RSSI only)
* @rssi_thold: don't report scan results below this threshold (in s32 dBm)
*/
struct cfg80211_match_set {
struct cfg80211_ssid ssid;
+ u8 bssid[ETH_ALEN];
s32 rssi_thold;
};
@@ -1662,6 +1666,7 @@ struct cfg80211_bss_select_adjust {
* (others are filtered out).
* If ommited, all results are passed.
* @n_match_sets: number of match sets
+ * @results_wk: worker for processing results notification.
* @wiphy: the wiphy this was for
* @dev: the interface
* @scan_start: start time of the scheduled scan
@@ -1678,6 +1683,8 @@ struct cfg80211_bss_select_adjust {
* @rcu_head: RCU callback used to free the struct
* @owner_nlportid: netlink portid of owner (if this should is a request
* owned by a particular socket)
+ * @nl_owner_dead: netlink owner socket was closed - this request be freed
+ * @list: for keeping list of requests.
* @delay: delay in seconds to use before starting the first scan
* cycle. The driver may ignore this parameter and start
* immediately (or at any other time), if this feature is not
@@ -1720,8 +1727,11 @@ struct cfg80211_sched_scan_request {
struct wiphy *wiphy;
struct net_device *dev;
unsigned long scan_start;
+ bool report_results;
struct rcu_head rcu_head;
u32 owner_nlportid;
+ bool nl_owner_dead;
+ struct list_head list;
/* keep last */
struct ieee80211_channel *channels[0];
@@ -2678,8 +2688,7 @@ struct cfg80211_nan_func {
* indication of requesting reassociation.
* In both the driver-initiated and new connect() call initiated roaming
* cases, the result of roaming is indicated with a call to
- * cfg80211_roamed() or cfg80211_roamed_bss().
- * (invoked with the wireless_dev mutex held)
+ * cfg80211_roamed(). (invoked with the wireless_dev mutex held)
* @update_connect_params: Update the connect parameters while connected to a
* BSS. The updated parameters can be used by driver/firmware for
* subsequent BSS selection (roaming) decisions and to form the
@@ -2765,12 +2774,12 @@ struct cfg80211_nan_func {
* @set_cqm_txe_config: Configure connection quality monitor TX error
* thresholds.
* @sched_scan_start: Tell the driver to start a scheduled scan.
- * @sched_scan_stop: Tell the driver to stop an ongoing scheduled scan. This
- * call must stop the scheduled scan and be ready for starting a new one
- * before it returns, i.e. @sched_scan_start may be called immediately
- * after that again and should not fail in that case. The driver should
- * not call cfg80211_sched_scan_stopped() for a requested stop (when this
- * method returns 0.)
+ * @sched_scan_stop: Tell the driver to stop an ongoing scheduled scan with
+ * given request id. This call must stop the scheduled scan and be ready
+ * for starting a new one before it returns, i.e. @sched_scan_start may be
+ * called immediately after that again and should not fail in that case.
+ * The driver should not call cfg80211_sched_scan_stopped() for a requested
+ * stop (when this method returns 0).
*
* @mgmt_frame_register: Notify driver that a management frame type was
* registered. The callback is allowed to sleep.
@@ -3068,7 +3077,8 @@ struct cfg80211_ops {
int (*sched_scan_start)(struct wiphy *wiphy,
struct net_device *dev,
struct cfg80211_sched_scan_request *request);
- int (*sched_scan_stop)(struct wiphy *wiphy, struct net_device *dev);
+ int (*sched_scan_stop)(struct wiphy *wiphy, struct net_device *dev,
+ u64 reqid);
int (*set_rekey_data)(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_gtk_rekey_data *data);
@@ -3213,7 +3223,7 @@ enum wiphy_flags {
WIPHY_FLAG_CONTROL_PORT_PROTOCOL = BIT(7),
WIPHY_FLAG_IBSS_RSN = BIT(8),
WIPHY_FLAG_MESH_AUTH = BIT(10),
- WIPHY_FLAG_SUPPORTS_SCHED_SCAN = BIT(11),
+ /* use hole at 11 */
/* use hole at 12 */
WIPHY_FLAG_SUPPORTS_FW_ROAM = BIT(13),
WIPHY_FLAG_AP_UAPSD = BIT(14),
@@ -3551,6 +3561,8 @@ struct wiphy_iftype_ext_capab {
* this variable determines its size
* @max_scan_ssids: maximum number of SSIDs the device can scan for in
* any given scan
+ * @max_sched_scan_reqs: maximum number of scheduled scan requests that
+ * the device can run concurrently.
* @max_sched_scan_ssids: maximum number of SSIDs the device can scan
* for in any given scheduled scan
* @max_match_sets: maximum number of match sets the device can handle
@@ -3687,6 +3699,7 @@ struct wiphy {
int bss_priv_size;
u8 max_scan_ssids;
+ u8 max_sched_scan_reqs;
u8 max_sched_scan_ssids;
u8 max_match_sets;
u16 max_scan_ie_len;
@@ -3988,6 +4001,7 @@ struct cfg80211_cqm_config;
* @event_list: (private) list for internal event processing
* @event_lock: (private) lock for event list
* @owner_nlportid: (private) owner socket port ID
+ * @nl_owner_dead: (private) owner socket went away
* @cqm_config: (private) nl80211 RSSI monitor state
*/
struct wireless_dev {
@@ -4037,12 +4051,13 @@ struct wireless_dev {
u32 ap_unexpected_nlportid;
+ u32 owner_nlportid;
+ bool nl_owner_dead;
+
bool cac_started;
unsigned long cac_start_time;
unsigned int cac_time_ms;
- u32 owner_nlportid;
-
#ifdef CONFIG_CFG80211_WEXT
/* wext data */
struct {
@@ -4551,31 +4566,34 @@ void cfg80211_scan_done(struct cfg80211_scan_request *request,
* cfg80211_sched_scan_results - notify that new scan results are available
*
* @wiphy: the wiphy which got scheduled scan results
+ * @reqid: identifier for the related scheduled scan request
*/
-void cfg80211_sched_scan_results(struct wiphy *wiphy);
+void cfg80211_sched_scan_results(struct wiphy *wiphy, u64 reqid);
/**
* cfg80211_sched_scan_stopped - notify that the scheduled scan has stopped
*
* @wiphy: the wiphy on which the scheduled scan stopped
+ * @reqid: identifier for the related scheduled scan request
*
* The driver can call this function to inform cfg80211 that the
* scheduled scan had to be stopped, for whatever reason. The driver
* is then called back via the sched_scan_stop operation when done.
*/
-void cfg80211_sched_scan_stopped(struct wiphy *wiphy);
+void cfg80211_sched_scan_stopped(struct wiphy *wiphy, u64 reqid);
/**
* cfg80211_sched_scan_stopped_rtnl - notify that the scheduled scan has stopped
*
* @wiphy: the wiphy on which the scheduled scan stopped
+ * @reqid: identifier for the related scheduled scan request
*
* The driver can call this function to inform cfg80211 that the
* scheduled scan had to be stopped, for whatever reason. The driver
* is then called back via the sched_scan_stop operation when done.
* This function should be called with rtnl locked.
*/
-void cfg80211_sched_scan_stopped_rtnl(struct wiphy *wiphy);
+void cfg80211_sched_scan_stopped_rtnl(struct wiphy *wiphy, u64 reqid);
/**
* cfg80211_inform_bss_frame_data - inform cfg80211 of a received BSS frame
@@ -5376,51 +5394,46 @@ cfg80211_connect_timeout(struct net_device *dev, const u8 *bssid,
}
/**
- * cfg80211_roamed - notify cfg80211 of roaming
+ * struct cfg80211_roam_info - driver initiated roaming information
*
- * @dev: network device
* @channel: the channel of the new AP
- * @bssid: the BSSID of the new AP
+ * @bss: entry of bss to which STA got roamed (may be %NULL if %bssid is set)
+ * @bssid: the BSSID of the new AP (may be %NULL if %bss is set)
* @req_ie: association request IEs (maybe be %NULL)
* @req_ie_len: association request IEs length
* @resp_ie: association response IEs (may be %NULL)
* @resp_ie_len: assoc response IEs length
- * @gfp: allocation flags
- *
- * It should be called by the underlying driver whenever it roamed
- * from one AP to another while connected.
*/
-void cfg80211_roamed(struct net_device *dev,
- struct ieee80211_channel *channel,
- const u8 *bssid,
- const u8 *req_ie, size_t req_ie_len,
- const u8 *resp_ie, size_t resp_ie_len, gfp_t gfp);
+struct cfg80211_roam_info {
+ struct ieee80211_channel *channel;
+ struct cfg80211_bss *bss;
+ const u8 *bssid;
+ const u8 *req_ie;
+ size_t req_ie_len;
+ const u8 *resp_ie;
+ size_t resp_ie_len;
+};
/**
- * cfg80211_roamed_bss - notify cfg80211 of roaming
+ * cfg80211_roamed - notify cfg80211 of roaming
*
* @dev: network device
- * @bss: entry of bss to which STA got roamed
- * @req_ie: association request IEs (maybe be %NULL)
- * @req_ie_len: association request IEs length
- * @resp_ie: association response IEs (may be %NULL)
- * @resp_ie_len: assoc response IEs length
+ * @info: information about the new BSS. struct &cfg80211_roam_info.
* @gfp: allocation flags
*
- * This is just a wrapper to notify cfg80211 of roaming event with driver
- * passing bss to avoid a race in timeout of the bss entry. It should be
- * called by the underlying driver whenever it roamed from one AP to another
- * while connected. Drivers which have roaming implemented in firmware
- * may use this function to avoid a race in bss entry timeout where the bss
- * entry of the new AP is seen in the driver, but gets timed out by the time
- * it is accessed in __cfg80211_roamed() due to delay in scheduling
+ * This function may be called with the driver passing either the BSSID of the
+ * new AP or passing the bss entry to avoid a race in timeout of the bss entry.
+ * It should be called by the underlying driver whenever it roamed from one AP
+ * to another while connected. Drivers which have roaming implemented in
+ * firmware should pass the bss entry to avoid a race in bss entry timeout where
+ * the bss entry of the new AP is seen in the driver, but gets timed out by the
+ * time it is accessed in __cfg80211_roamed() due to delay in scheduling
* rdev->event_work. In case of any failures, the reference is released
- * either in cfg80211_roamed_bss() or in __cfg80211_romed(), Otherwise,
- * it will be released while diconneting from the current bss.
+ * either in cfg80211_roamed() or in __cfg80211_romed(), Otherwise, it will be
+ * released while diconneting from the current bss.
*/
-void cfg80211_roamed_bss(struct net_device *dev, struct cfg80211_bss *bss,
- const u8 *req_ie, size_t req_ie_len,
- const u8 *resp_ie, size_t resp_ie_len, gfp_t gfp);
+void cfg80211_roamed(struct net_device *dev, struct cfg80211_roam_info *info,
+ gfp_t gfp);
/**
* cfg80211_disconnected - notify cfg80211 that connection was dropped
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index b1ac872dc88a..4d05a9443344 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -5,7 +5,7 @@
* Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
* Copyright 2007-2010 Johannes Berg <johannes@sipsolutions.net>
* Copyright 2013-2014 Intel Mobile Communications GmbH
- * Copyright (C) 2015 - 2016 Intel Deutschland GmbH
+ * Copyright (C) 2015 - 2017 Intel Deutschland GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -299,6 +299,8 @@ struct ieee80211_vif_chanctx_switch {
* context had been assigned.
* @BSS_CHANGED_OCB: OCB join status changed
* @BSS_CHANGED_MU_GROUPS: VHT MU-MIMO group id or user position changed
+ * @BSS_CHANGED_KEEP_ALIVE: keep alive options (idle period or protected
+ * keep alive) changed.
*/
enum ieee80211_bss_change {
BSS_CHANGED_ASSOC = 1<<0,
@@ -325,6 +327,7 @@ enum ieee80211_bss_change {
BSS_CHANGED_BANDWIDTH = 1<<21,
BSS_CHANGED_OCB = 1<<22,
BSS_CHANGED_MU_GROUPS = 1<<23,
+ BSS_CHANGED_KEEP_ALIVE = 1<<24,
/* when adding here, make sure to change ieee80211_reconfig */
};
@@ -533,6 +536,13 @@ struct ieee80211_mu_group_data {
* @allow_p2p_go_ps: indication for AP or P2P GO interface, whether it's allowed
* to use P2P PS mechanism or not. AP/P2P GO is not allowed to use P2P PS
* if it has associated clients without P2P PS support.
+ * @max_idle_period: the time period during which the station can refrain from
+ * transmitting frames to its associated AP without being disassociated.
+ * In units of 1000 TUs. Zero value indicates that the AP did not include
+ * a (valid) BSS Max Idle Period Element.
+ * @protected_keep_alive: if set, indicates that the station should send an RSN
+ * protected frame to the AP to reset the idle timer at the AP for the
+ * station.
*/
struct ieee80211_bss_conf {
const u8 *bssid;
@@ -573,6 +583,8 @@ struct ieee80211_bss_conf {
enum nl80211_tx_power_setting txpower_type;
struct ieee80211_p2p_noa_attr p2p_noa_attr;
bool allow_p2p_go_ps;
+ u16 max_idle_period;
+ bool protected_keep_alive;
};
/**
@@ -949,6 +961,19 @@ struct ieee80211_tx_info {
};
/**
+ * struct ieee80211_tx_status - extended tx staus info for rate control
+ *
+ * @sta: Station that the packet was transmitted for
+ * @info: Basic tx status information
+ * @skb: Packet skb (can be NULL if not provided by the driver)
+ */
+struct ieee80211_tx_status {
+ struct ieee80211_sta *sta;
+ struct ieee80211_tx_info *info;
+ struct sk_buff *skb;
+};
+
+/**
* struct ieee80211_scan_ies - descriptors for different blocks of IEs
*
* This structure is used to point to different blocks of IEs in HW scan
@@ -1045,16 +1070,8 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
* (including FCS) was received.
* @RX_FLAG_MACTIME_PLCP_START: The timestamp passed in the RX status (@mactime
* field) is valid and contains the time the SYNC preamble was received.
- * @RX_FLAG_SHORTPRE: Short preamble was used for this frame
- * @RX_FLAG_HT: HT MCS was used and rate_idx is MCS index
- * @RX_FLAG_VHT: VHT MCS was used and rate_index is MCS index
- * @RX_FLAG_40MHZ: HT40 (40 MHz) was used
- * @RX_FLAG_SHORT_GI: Short guard interval was used
* @RX_FLAG_NO_SIGNAL_VAL: The signal strength value is not present.
* Valid only for data frames (mainly A-MPDU)
- * @RX_FLAG_HT_GF: This frame was received in a HT-greenfield transmission, if
- * the driver fills this value it should add %IEEE80211_RADIOTAP_MCS_HAVE_FMT
- * to hw.radiotap_mcs_details to advertise that fact
* @RX_FLAG_AMPDU_DETAILS: A-MPDU details are known, in particular the reference
* number (@ampdu_reference) must be populated and be a distinct number for
* each A-MPDU
@@ -1067,7 +1084,6 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
* is stored in the @ampdu_delimiter_crc field)
* @RX_FLAG_MIC_STRIPPED: The mic was stripped of this packet. Decryption was
* done by the hardware
- * @RX_FLAG_LDPC: LDPC was used
* @RX_FLAG_ONLY_MONITOR: Report frame only to monitor interfaces without
* processing it in any regular way.
* This is useful if drivers offload some frames but still want to report
@@ -1076,9 +1092,6 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
* monitor interfaces.
* This is useful if drivers offload some frames but still want to report
* them for sniffing purposes.
- * @RX_FLAG_STBC_MASK: STBC 2 bit bitmask. 1 - Nss=1, 2 - Nss=2, 3 - Nss=3
- * @RX_FLAG_10MHZ: 10 MHz (half channel) was used
- * @RX_FLAG_5MHZ: 5 MHz (quarter channel) was used
* @RX_FLAG_AMSDU_MORE: Some drivers may prefer to report separate A-MSDU
* subframes instead of a one huge frame for performance reasons.
* All, but the last MSDU from an A-MSDU should have this flag set. E.g.
@@ -1106,50 +1119,54 @@ enum mac80211_rx_flags {
RX_FLAG_FAILED_FCS_CRC = BIT(5),
RX_FLAG_FAILED_PLCP_CRC = BIT(6),
RX_FLAG_MACTIME_START = BIT(7),
- RX_FLAG_SHORTPRE = BIT(8),
- RX_FLAG_HT = BIT(9),
- RX_FLAG_40MHZ = BIT(10),
- RX_FLAG_SHORT_GI = BIT(11),
- RX_FLAG_NO_SIGNAL_VAL = BIT(12),
- RX_FLAG_HT_GF = BIT(13),
- RX_FLAG_AMPDU_DETAILS = BIT(14),
- RX_FLAG_PN_VALIDATED = BIT(15),
- RX_FLAG_DUP_VALIDATED = BIT(16),
- RX_FLAG_AMPDU_LAST_KNOWN = BIT(17),
- RX_FLAG_AMPDU_IS_LAST = BIT(18),
- RX_FLAG_AMPDU_DELIM_CRC_ERROR = BIT(19),
- RX_FLAG_AMPDU_DELIM_CRC_KNOWN = BIT(20),
- RX_FLAG_MACTIME_END = BIT(21),
- RX_FLAG_VHT = BIT(22),
- RX_FLAG_LDPC = BIT(23),
- RX_FLAG_ONLY_MONITOR = BIT(24),
- RX_FLAG_SKIP_MONITOR = BIT(25),
- RX_FLAG_STBC_MASK = BIT(26) | BIT(27),
- RX_FLAG_10MHZ = BIT(28),
- RX_FLAG_5MHZ = BIT(29),
- RX_FLAG_AMSDU_MORE = BIT(30),
- RX_FLAG_RADIOTAP_VENDOR_DATA = BIT(31),
- RX_FLAG_MIC_STRIPPED = BIT_ULL(32),
- RX_FLAG_ALLOW_SAME_PN = BIT_ULL(33),
- RX_FLAG_ICV_STRIPPED = BIT_ULL(34),
+ RX_FLAG_NO_SIGNAL_VAL = BIT(8),
+ RX_FLAG_AMPDU_DETAILS = BIT(9),
+ RX_FLAG_PN_VALIDATED = BIT(10),
+ RX_FLAG_DUP_VALIDATED = BIT(11),
+ RX_FLAG_AMPDU_LAST_KNOWN = BIT(12),
+ RX_FLAG_AMPDU_IS_LAST = BIT(13),
+ RX_FLAG_AMPDU_DELIM_CRC_ERROR = BIT(14),
+ RX_FLAG_AMPDU_DELIM_CRC_KNOWN = BIT(15),
+ RX_FLAG_MACTIME_END = BIT(16),
+ RX_FLAG_ONLY_MONITOR = BIT(17),
+ RX_FLAG_SKIP_MONITOR = BIT(18),
+ RX_FLAG_AMSDU_MORE = BIT(19),
+ RX_FLAG_RADIOTAP_VENDOR_DATA = BIT(20),
+ RX_FLAG_MIC_STRIPPED = BIT(21),
+ RX_FLAG_ALLOW_SAME_PN = BIT(22),
+ RX_FLAG_ICV_STRIPPED = BIT(23),
};
-#define RX_FLAG_STBC_SHIFT 26
-
/**
- * enum mac80211_rx_vht_flags - receive VHT flags
+ * enum mac80211_rx_encoding_flags - MCS & bandwidth flags
*
- * These flags are used with the @vht_flag member of
- * &struct ieee80211_rx_status.
- * @RX_VHT_FLAG_80MHZ: 80 MHz was used
- * @RX_VHT_FLAG_160MHZ: 160 MHz was used
- * @RX_VHT_FLAG_BF: packet was beamformed
- */
+ * @RX_ENC_FLAG_SHORTPRE: Short preamble was used for this frame
+ * @RX_ENC_FLAG_40MHZ: HT40 (40 MHz) was used
+ * @RX_ENC_FLAG_SHORT_GI: Short guard interval was used
+ * @RX_ENC_FLAG_HT_GF: This frame was received in a HT-greenfield transmission,
+ * if the driver fills this value it should add
+ * %IEEE80211_RADIOTAP_MCS_HAVE_FMT
+ * to hw.radiotap_mcs_details to advertise that fact
+ * @RX_ENC_FLAG_LDPC: LDPC was used
+ * @RX_ENC_FLAG_STBC_MASK: STBC 2 bit bitmask. 1 - Nss=1, 2 - Nss=2, 3 - Nss=3
+ * @RX_ENC_FLAG_BF: packet was beamformed
+ */
+enum mac80211_rx_encoding_flags {
+ RX_ENC_FLAG_SHORTPRE = BIT(0),
+ RX_ENC_FLAG_40MHZ = BIT(1),
+ RX_ENC_FLAG_SHORT_GI = BIT(2),
+ RX_ENC_FLAG_HT_GF = BIT(3),
+ RX_ENC_FLAG_STBC_MASK = BIT(4) | BIT(5),
+ RX_ENC_FLAG_LDPC = BIT(6),
+ RX_ENC_FLAG_BF = BIT(7),
+};
-enum mac80211_rx_vht_flags {
- RX_VHT_FLAG_80MHZ = BIT(0),
- RX_VHT_FLAG_160MHZ = BIT(1),
- RX_VHT_FLAG_BF = BIT(2),
+#define RX_ENC_FLAG_STBC_SHIFT 4
+
+enum mac80211_rx_encoding {
+ RX_ENC_LEGACY = 0,
+ RX_ENC_HT,
+ RX_ENC_VHT,
};
/**
@@ -1179,9 +1196,11 @@ enum mac80211_rx_vht_flags {
* @antenna: antenna used
* @rate_idx: index of data rate into band's supported rates or MCS index if
* HT or VHT is used (%RX_FLAG_HT/%RX_FLAG_VHT)
- * @vht_nss: number of streams (VHT only)
+ * @nss: number of streams (VHT and HE only)
* @flag: %RX_FLAG_\*
- * @vht_flag: %RX_VHT_FLAG_\*
+ * @encoding: &enum mac80211_rx_encoding
+ * @bw: &enum rate_info_bw
+ * @enc_flags: uses bits from &enum mac80211_rx_encoding_flags
* @rx_flags: internal RX flags for mac80211
* @ampdu_reference: A-MPDU reference number, must be a different value for
* each A-MPDU but the same for each subframe within one A-MPDU
@@ -1192,11 +1211,12 @@ struct ieee80211_rx_status {
u64 boottime_ns;
u32 device_timestamp;
u32 ampdu_reference;
- u64 flag;
+ u32 flag;
u16 freq;
- u8 vht_flag;
+ u8 enc_flags;
+ u8 encoding:2, bw:3;
u8 rate_idx;
- u8 vht_nss;
+ u8 nss;
u8 rx_flags;
u8 band;
u8 antenna;
@@ -4206,6 +4226,23 @@ void ieee80211_tx_status(struct ieee80211_hw *hw,
struct sk_buff *skb);
/**
+ * ieee80211_tx_status_ext - extended transmit status callback
+ *
+ * This function can be used as a replacement for ieee80211_tx_status
+ * in drivers that may want to provide extra information that does not
+ * fit into &struct ieee80211_tx_info.
+ *
+ * Calls to this function for a single hardware must be synchronized
+ * against each other. Calls to this function, ieee80211_tx_status_ni()
+ * and ieee80211_tx_status_irqsafe() may not be mixed for a single hardware.
+ *
+ * @hw: the hardware the frame was transmitted by
+ * @status: tx status information
+ */
+void ieee80211_tx_status_ext(struct ieee80211_hw *hw,
+ struct ieee80211_tx_status *status);
+
+/**
* ieee80211_tx_status_noskb - transmit status callback without skb
*
* This function can be used as a replacement for ieee80211_tx_status
@@ -4221,9 +4258,17 @@ void ieee80211_tx_status(struct ieee80211_hw *hw,
* (NULL for multicast packets)
* @info: tx status information
*/
-void ieee80211_tx_status_noskb(struct ieee80211_hw *hw,
- struct ieee80211_sta *sta,
- struct ieee80211_tx_info *info);
+static inline void ieee80211_tx_status_noskb(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta,
+ struct ieee80211_tx_info *info)
+{
+ struct ieee80211_tx_status status = {
+ .sta = sta,
+ .info = info,
+ };
+
+ ieee80211_tx_status_ext(hw, &status);
+}
/**
* ieee80211_tx_status_ni - transmit status callback (in process context)
@@ -5476,10 +5521,9 @@ struct rate_control_ops {
void (*free_sta)(void *priv, struct ieee80211_sta *sta,
void *priv_sta);
- void (*tx_status_noskb)(void *priv,
- struct ieee80211_supported_band *sband,
- struct ieee80211_sta *sta, void *priv_sta,
- struct ieee80211_tx_info *info);
+ void (*tx_status_ext)(void *priv,
+ struct ieee80211_supported_band *sband,
+ void *priv_sta, struct ieee80211_tx_status *st);
void (*tx_status)(void *priv, struct ieee80211_supported_band *sband,
struct ieee80211_sta *sta, void *priv_sta,
struct sk_buff *skb);
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 6095a6c4c412..b8c44b98f12d 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -387,7 +387,9 @@
* are used. Extra IEs can also be passed from the userspace by
* using the %NL80211_ATTR_IE attribute. The first cycle of the
* scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY
- * is supplied.
+ * is supplied. If the device supports multiple concurrent scheduled
+ * scans, it will allow such when the caller provides the flag attribute
+ * %NL80211_ATTR_SCHED_SCAN_MULTI to indicate user-space support for it.
* @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if
* scheduled scan is not running. The caller may assume that as soon
* as the call returns, it is safe to start a new scheduled scan again.
@@ -2081,6 +2083,11 @@ enum nl80211_commands {
* @NL80211_ATTR_PMK: PMK for the PMKSA identified by %NL80211_ATTR_PMKID.
* This is used with @NL80211_CMD_SET_PMKSA.
*
+ * @NL80211_ATTR_SCHED_SCAN_MULTI: flag attribute which user-space shall use to
+ * indicate that it supports multiple active scheduled scan requests.
+ * @NL80211_ATTR_SCHED_SCAN_MAX_REQS: indicates maximum number of scheduled
+ * scan request that may be active for the device (u32).
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2500,6 +2507,9 @@ enum nl80211_attrs {
NL80211_ATTR_PMK,
+ NL80211_ATTR_SCHED_SCAN_MULTI,
+ NL80211_ATTR_SCHED_SCAN_MAX_REQS,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -3184,6 +3194,7 @@ enum nl80211_reg_rule_attr {
* @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
* @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
* only report BSS with matching SSID.
+ * (This cannot be used together with BSSID.)
* @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a
* BSS in scan results. Filtering is turned off if not specified. Note that
* if this attribute is in a match set of its own, then it is treated as
@@ -3199,6 +3210,8 @@ enum nl80211_reg_rule_attr {
* BSS-es in the specified band is to be adjusted before doing
* RSSI-based BSS selection. The attribute value is a packed structure
* value as specified by &struct nl80211_bss_select_rssi_adjust.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching
+ * (this cannot be used together with SSID).
* @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
* attribute number currently defined
* @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
@@ -3210,6 +3223,7 @@ enum nl80211_sched_scan_match_attr {
NL80211_SCHED_SCAN_MATCH_ATTR_RSSI,
NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI,
NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST,
+ NL80211_SCHED_SCAN_MATCH_ATTR_BSSID,
/* keep last */
__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,