Merge /spare/repo/linux-2.6/

26 files changed, 4921 insertions, 55 deletions

diff --git a/include/asm-arm/arch-sa1100/mcp.h b/include/asm-arm/arch-sa1100/mcp.h
new file mode 100644
index 000000000000..f58a22755c61
--- /dev/null
+++ b/include/asm-arm/arch-sa1100/mcp.h
@@ -0,0 +1,21 @@
+/*
+ *  linux/include/asm-arm/arch-sa1100/mcp.h
+ *
+ *  Copyright (C) 2005 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_ARCH_MCP_H
+#define __ASM_ARM_ARCH_MCP_H
+
+#include <linux/types.h>
+
+struct mcp_plat_data {
+	u32 mccr0;
+	u32 mccr1;
+	unsigned int sclk_rate;
+};
+
+#endif
diff --git a/include/asm-arm/hardware/gic.h b/include/asm-arm/hardware/gic.h
new file mode 100644
index 000000000000..3fa5eb70f64e
--- /dev/null
+++ b/include/asm-arm/hardware/gic.h
@@ -0,0 +1,41 @@
+/*
+ *  linux/include/asm-arm/hardware/gic.h
+ *
+ *  Copyright (C) 2002 ARM Limited, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_HARDWARE_GIC_H
+#define __ASM_ARM_HARDWARE_GIC_H
+
+#include <linux/compiler.h>
+
+#define GIC_CPU_CTRL			0x00
+#define GIC_CPU_PRIMASK			0x04
+#define GIC_CPU_BINPOINT		0x08
+#define GIC_CPU_INTACK			0x0c
+#define GIC_CPU_EOI			0x10
+#define GIC_CPU_RUNNINGPRI		0x14
+#define GIC_CPU_HIGHPRI			0x18
+
+#define GIC_DIST_CTRL			0x000
+#define GIC_DIST_CTR			0x004
+#define GIC_DIST_ENABLE_SET		0x100
+#define GIC_DIST_ENABLE_CLEAR		0x180
+#define GIC_DIST_PENDING_SET		0x200
+#define GIC_DIST_PENDING_CLEAR		0x280
+#define GIC_DIST_ACTIVE_BIT		0x300
+#define GIC_DIST_PRI			0x400
+#define GIC_DIST_TARGET			0x800
+#define GIC_DIST_CONFIG			0xc00
+#define GIC_DIST_SOFTINT		0xf00
+
+#ifndef __ASSEMBLY__
+void gic_dist_init(void __iomem *base);
+void gic_cpu_init(void __iomem *base);
+void gic_raise_softirq(cpumask_t cpumask, unsigned int irq);
+#endif
+
+#endif
diff --git a/include/asm-m68k/page.h b/include/asm-m68k/page.h
index 99a516709210..206313e2a817 100644
--- a/include/asm-m68k/page.h
+++ b/include/asm-m68k/page.h
@@ -138,13 +138,13 @@ extern unsigned long m68k_memoffset;
 #define __pa(vaddr)		((unsigned long)(vaddr)+m68k_memoffset)
 #define __va(paddr)		((void *)((unsigned long)(paddr)-m68k_memoffset))
 #else
-#define __pa(vaddr)		virt_to_phys((void *)vaddr)
-#define __va(paddr)		phys_to_virt((unsigned long)paddr)
+#define __pa(vaddr)		virt_to_phys((void *)(vaddr))
+#define __va(paddr)		phys_to_virt((unsigned long)(paddr))
 #endif
 
 #else	/* !CONFIG_SUN3 */
 /* This #define is a horrible hack to suppress lots of warnings. --m */
-#define __pa(x) ___pa((unsigned long)x)
+#define __pa(x) ___pa((unsigned long)(x))
 static inline unsigned long ___pa(unsigned long x)
 {
      if(x == 0)
diff --git a/include/asm-ppc64/bug.h b/include/asm-ppc64/bug.h
index 169868fa307d..160178278861 100644
--- a/include/asm-ppc64/bug.h
+++ b/include/asm-ppc64/bug.h
@@ -43,8 +43,8 @@ struct bug_entry *find_bug(unsigned long bugaddr);
 		".section __bug_table,\"a\"\n\t"		\
 		"	.llong 1b,%1,%2,%3\n"			\
 		".previous"					\
-		: : "r" (x), "i" (__LINE__), "i" (__FILE__),	\
-		    "i" (__FUNCTION__));			\
+		: : "r" ((long long)(x)), "i" (__LINE__),	\
+		    "i" (__FILE__), "i" (__FUNCTION__));	\
 } while (0)
 
 #define WARN_ON(x) do {						\
@@ -53,7 +53,8 @@ struct bug_entry *find_bug(unsigned long bugaddr);
 		".section __bug_table,\"a\"\n\t"		\
 		"	.llong 1b,%1,%2,%3\n"			\
 		".previous"					\
-		: : "r" (x), "i" (__LINE__ + BUG_WARNING_TRAP),	\
+		: : "r" ((long long)(x)),			\
+		    "i" (__LINE__ + BUG_WARNING_TRAP),		\
 		    "i" (__FILE__), "i" (__FUNCTION__));	\
 } while (0)
 
diff --git a/include/asm-x86_64/e820.h b/include/asm-x86_64/e820.h
index 8e94edf0b984..e682edc24a68 100644
--- a/include/asm-x86_64/e820.h
+++ b/include/asm-x86_64/e820.h
@@ -51,6 +51,8 @@ extern int e820_mapped(unsigned long start, unsigned long end, unsigned type);
 
 extern void e820_bootmem_free(pg_data_t *pgdat, unsigned long start,unsigned long end);
 extern void e820_setup_gap(void);
+extern unsigned long e820_hole_size(unsigned long start_pfn,
+				    unsigned long end_pfn);
 
 extern void __init parse_memopt(char *p, char **end);
 
diff --git a/include/linux/8250_pci.h b/include/linux/8250_pci.h
index 5f3ab21b339b..3209dd46ea7d 100644
--- a/include/linux/8250_pci.h
+++ b/include/linux/8250_pci.h
@@ -1,2 +1,37 @@
-int pci_siig10x_fn(struct pci_dev *dev, int enable);
-int pci_siig20x_fn(struct pci_dev *dev, int enable);
+/*
+ * Definitions for PCI support.
+ */
+#define FL_BASE_MASK		0x0007
+#define FL_BASE0		0x0000
+#define FL_BASE1		0x0001
+#define FL_BASE2		0x0002
+#define FL_BASE3		0x0003
+#define FL_BASE4		0x0004
+#define FL_GET_BASE(x)		(x & FL_BASE_MASK)
+
+/* Use successive BARs (PCI base address registers),
+   else use offset into some specified BAR */
+#define FL_BASE_BARS		0x0008
+
+/* do not assign an irq */
+#define FL_NOIRQ		0x0080
+
+/* Use the Base address register size to cap number of ports */
+#define FL_REGION_SZ_CAP	0x0100
+
+struct pciserial_board {
+	unsigned int flags;
+	unsigned int num_ports;
+	unsigned int base_baud;
+	unsigned int uart_offset;
+	unsigned int reg_shift;
+	unsigned int first_offset;
+};
+
+struct serial_private;
+
+struct serial_private *
+pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board);
+void pciserial_remove_ports(struct serial_private *priv);
+void pciserial_suspend_ports(struct serial_private *priv);
+void pciserial_resume_ports(struct serial_private *priv);
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 19c3e2853f17..a5b74efab067 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -113,6 +113,8 @@ enum {
 
 	/* ATA device commands */
 	ATA_CMD_CHK_POWER	= 0xE5, /* check power mode */
+	ATA_CMD_STANDBY		= 0xE2, /* place in standby power mode */
+	ATA_CMD_IDLE		= 0xE3, /* place in idle power mode */
 	ATA_CMD_EDD		= 0x90,	/* execute device diagnostic */
 	ATA_CMD_FLUSH		= 0xE7,
 	ATA_CMD_FLUSH_EXT	= 0xEA,
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index a0ab26aab450..d7021c391b2b 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -408,6 +408,8 @@ struct ethtool_ops {
 #define SUPPORTED_FIBRE			(1 << 10)
 #define SUPPORTED_BNC			(1 << 11)
 #define SUPPORTED_10000baseT_Full	(1 << 12)
+#define SUPPORTED_Pause			(1 << 13)
+#define SUPPORTED_Asym_Pause		(1 << 14)
 
 /* Indicates what features are advertised by the interface. */
 #define ADVERTISED_10baseT_Half		(1 << 0)
@@ -423,6 +425,8 @@ struct ethtool_ops {
 #define ADVERTISED_FIBRE		(1 << 10)
 #define ADVERTISED_BNC			(1 << 11)
 #define ADVERTISED_10000baseT_Full	(1 << 12)
+#define ADVERTISED_Pause		(1 << 13)
+#define ADVERTISED_Asym_Pause		(1 << 14)
 
 /* The following are all involved in forcing a particular link
  * mode for the device for setting things.  When getting the
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 51d2b20d34f2..fc05a9899288 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -116,6 +116,8 @@ enum {
 	ATA_FLAG_MMIO		= (1 << 6), /* use MMIO, not PIO */
 	ATA_FLAG_SATA_RESET	= (1 << 7), /* use COMRESET */
 	ATA_FLAG_PIO_DMA	= (1 << 8), /* PIO cmds via DMA */
+	ATA_FLAG_NOINTR		= (1 << 9), /* FIXME: Remove this once
+					     * proper HSM is in place. */
 
 	ATA_QCFLAG_ACTIVE	= (1 << 1), /* cmd not yet ack'd to scsi lyer */
 	ATA_QCFLAG_SG		= (1 << 3), /* have s/g table? */
@@ -366,7 +368,7 @@ struct ata_port_operations {
 
 	void (*host_stop) (struct ata_host_set *host_set);
 
-	void (*bmdma_stop) (struct ata_port *ap);
+	void (*bmdma_stop) (struct ata_queued_cmd *qc);
 	u8   (*bmdma_status) (struct ata_port *ap);
 };
 
@@ -427,7 +429,7 @@ extern void ata_dev_id_string(u16 *id, unsigned char *s,
 extern void ata_dev_config(struct ata_port *ap, unsigned int i);
 extern void ata_bmdma_setup (struct ata_queued_cmd *qc);
 extern void ata_bmdma_start (struct ata_queued_cmd *qc);
-extern void ata_bmdma_stop(struct ata_port *ap);
+extern void ata_bmdma_stop(struct ata_queued_cmd *qc);
 extern u8   ata_bmdma_status(struct ata_port *ap);
 extern void ata_bmdma_irq_clear(struct ata_port *ap);
 extern void ata_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat);
@@ -647,7 +649,7 @@ static inline void scr_write(struct ata_port *ap, unsigned int reg, u32 val)
 	ap->ops->scr_write(ap, reg, val);
 }
 
-static inline void scr_write_flush(struct ata_port *ap, unsigned int reg, 
+static inline void scr_write_flush(struct ata_port *ap, unsigned int reg,
 				   u32 val)
 {
 	ap->ops->scr_write(ap, reg, val);
diff --git a/include/linux/mii.h b/include/linux/mii.h
index 374b615ea9ea..9b8d0476988a 100644
--- a/include/linux/mii.h
+++ b/include/linux/mii.h
@@ -22,6 +22,7 @@
 #define MII_EXPANSION       0x06        /* Expansion register          */
 #define MII_CTRL1000        0x09        /* 1000BASE-T control          */
 #define MII_STAT1000        0x0a        /* 1000BASE-T status           */
+#define MII_ESTATUS	    0x0f	/* Extended Status */
 #define MII_DCOUNTER        0x12        /* Disconnect counter          */
 #define MII_FCSCOUNTER      0x13        /* False carrier counter       */
 #define MII_NWAYTEST        0x14        /* N-way auto-neg test reg     */
@@ -54,7 +55,10 @@
 #define BMSR_ANEGCAPABLE        0x0008  /* Able to do auto-negotiation */
 #define BMSR_RFAULT             0x0010  /* Remote fault detected       */
 #define BMSR_ANEGCOMPLETE       0x0020  /* Auto-negotiation complete   */
-#define BMSR_RESV               0x07c0  /* Unused...                   */
+#define BMSR_RESV               0x00c0  /* Unused...                   */
+#define BMSR_ESTATEN		0x0100	/* Extended Status in R15 */
+#define BMSR_100FULL2		0x0200	/* Can do 100BASE-T2 HDX */
+#define BMSR_100HALF2		0x0400	/* Can do 100BASE-T2 FDX */
 #define BMSR_10HALF             0x0800  /* Can do 10mbps, half-duplex  */
 #define BMSR_10FULL             0x1000  /* Can do 10mbps, full-duplex  */
 #define BMSR_100HALF            0x2000  /* Can do 100mbps, half-duplex */
@@ -114,6 +118,9 @@
 #define EXPANSION_MFAULTS       0x0010  /* Multiple faults detected    */
 #define EXPANSION_RESV          0xffe0  /* Unused...                   */
 
+#define ESTATUS_1000_TFULL	0x2000	/* Can do 1000BT Full */
+#define ESTATUS_1000_THALF	0x1000	/* Can do 1000BT Half */
+
 /* N-way test register. */
 #define NWAYTEST_RESV1          0x00ff  /* Unused...                   */
 #define NWAYTEST_LOOPBACK       0x0100  /* Enable loopback for N-way   */
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index f90f674eb3b0..9a0893f3249e 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -63,11 +63,12 @@ struct device;
 
 struct mmc_host {
 	struct device		*dev;
+	struct class_device	class_dev;
+	int			index;
 	struct mmc_host_ops	*ops;
 	unsigned int		f_min;
 	unsigned int		f_max;
 	u32			ocr_avail;
-	char			host_name[8];
 
 	/* host specific block data */
 	unsigned int		max_seg_size;	/* see blk_queue_max_segment_size */
@@ -97,6 +98,7 @@ extern void mmc_free_host(struct mmc_host *);
 
 #define mmc_priv(x)	((void *)((x) + 1))
 #define mmc_dev(x)	((x)->dev)
+#define mmc_hostname(x)	((x)->class_dev.class_id)
 
 extern int mmc_suspend_host(struct mmc_host *, pm_message_t);
 extern int mmc_resume_host(struct mmc_host *);
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index dce53ac1625d..97bbccdbcca3 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -33,7 +33,8 @@ struct ieee1394_device_id {
 	__u32 model_id;
 	__u32 specifier_id;
 	__u32 version;
-	kernel_ulong_t driver_data;
+	kernel_ulong_t driver_data
+		__attribute__((aligned(sizeof(kernel_ulong_t))));
 };
 
 
@@ -182,7 +183,11 @@ struct of_device_id
 	char	name[32];
 	char	type[32];
 	char	compatible[128];
+#if __KERNEL__
 	void	*data;
+#else
+	kernel_ulong_t data;
+#endif
 };
 
 
@@ -208,7 +213,8 @@ struct pcmcia_device_id {
 #ifdef __KERNEL__
 	const char *	prod_id[4];
 #else
-	kernel_ulong_t	prod_id[4];
+	kernel_ulong_t	prod_id[4]
+		__attribute__((aligned(sizeof(kernel_ulong_t))));
 #endif
 
 	/* not matched against */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 927ed487630d..499a5325f67f 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1249,6 +1249,7 @@
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA	0x0266
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2	0x0267
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE	0x036E
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA	0x036F
 #define PCI_DEVICE_ID_NVIDIA_NVENET_12		0x0268
 #define PCI_DEVICE_ID_NVIDIA_NVENET_13		0x0269
 #define PCI_DEVICE_ID_NVIDIA_MCP51_AUDIO	0x026B
diff --git a/include/linux/phy.h b/include/linux/phy.h
new file mode 100644
index 000000000000..72cb67b66e0c
--- /dev/null
+++ b/include/linux/phy.h
@@ -0,0 +1,377 @@
+/*
+ * include/linux/phy.h
+ *
+ * Framework and drivers for configuring and reading different PHYs
+ * Based on code in sungem_phy.c and gianfar_phy.c
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __PHY_H
+#define __PHY_H
+
+#include <linux/spinlock.h>
+#include <linux/device.h>
+
+#define PHY_BASIC_FEATURES	(SUPPORTED_10baseT_Half | \
+				 SUPPORTED_10baseT_Full | \
+				 SUPPORTED_100baseT_Half | \
+				 SUPPORTED_100baseT_Full | \
+				 SUPPORTED_Autoneg | \
+				 SUPPORTED_TP | \
+				 SUPPORTED_MII)
+
+#define PHY_GBIT_FEATURES	(PHY_BASIC_FEATURES | \
+				 SUPPORTED_1000baseT_Half | \
+				 SUPPORTED_1000baseT_Full)
+
+/* Set phydev->irq to PHY_POLL if interrupts are not supported,
+ * or not desired for this PHY.  Set to PHY_IGNORE_INTERRUPT if
+ * the attached driver handles the interrupt
+ */
+#define PHY_POLL		-1
+#define PHY_IGNORE_INTERRUPT	-2
+
+#define PHY_HAS_INTERRUPT	0x00000001
+#define PHY_HAS_MAGICANEG	0x00000002
+
+#define MII_BUS_MAX 4
+
+
+#define PHY_INIT_TIMEOUT 100000
+#define PHY_STATE_TIME		1
+#define PHY_FORCE_TIMEOUT	10
+#define PHY_AN_TIMEOUT		10
+
+#define PHY_MAX_ADDR 32
+
+/* The Bus class for PHYs.  Devices which provide access to
+ * PHYs should register using this structure */
+struct mii_bus {
+	const char *name;
+	int id;
+	void *priv;
+	int (*read)(struct mii_bus *bus, int phy_id, int regnum);
+	int (*write)(struct mii_bus *bus, int phy_id, int regnum, u16 val);
+	int (*reset)(struct mii_bus *bus);
+
+	/* A lock to ensure that only one thing can read/write
+	 * the MDIO bus at a time */
+	spinlock_t mdio_lock;
+
+	struct device *dev;
+
+	/* list of all PHYs on bus */
+	struct phy_device *phy_map[PHY_MAX_ADDR];
+
+	/* Pointer to an array of interrupts, each PHY's
+	 * interrupt at the index matching its address */
+	int *irq;
+};
+
+#define PHY_INTERRUPT_DISABLED 0x0
+#define PHY_INTERRUPT_ENABLED 0x80000000
+
+/* PHY state machine states:
+ *
+ * DOWN: PHY device and driver are not ready for anything.  probe
+ * should be called if and only if the PHY is in this state,
+ * given that the PHY device exists.
+ * - PHY driver probe function will, depending on the PHY, set
+ * the state to STARTING or READY
+ *
+ * STARTING:  PHY device is coming up, and the ethernet driver is
+ * not ready.  PHY drivers may set this in the probe function.
+ * If they do, they are responsible for making sure the state is
+ * eventually set to indicate whether the PHY is UP or READY,
+ * depending on the state when the PHY is done starting up.
+ * - PHY driver will set the state to READY
+ * - start will set the state to PENDING
+ *
+ * READY: PHY is ready to send and receive packets, but the
+ * controller is not.  By default, PHYs which do not implement
+ * probe will be set to this state by phy_probe().  If the PHY
+ * driver knows the PHY is ready, and the PHY state is STARTING,
+ * then it sets this STATE.
+ * - start will set the state to UP
+ *
+ * PENDING: PHY device is coming up, but the ethernet driver is
+ * ready.  phy_start will set this state if the PHY state is
+ * STARTING.
+ * - PHY driver will set the state to UP when the PHY is ready
+ *
+ * UP: The PHY and attached device are ready to do work.
+ * Interrupts should be started here.
+ * - timer moves to AN
+ *
+ * AN: The PHY is currently negotiating the link state.  Link is
+ * therefore down for now.  phy_timer will set this state when it
+ * detects the state is UP.  config_aneg will set this state
+ * whenever called with phydev->autoneg set to AUTONEG_ENABLE.
+ * - If autonegotiation finishes, but there's no link, it sets
+ *   the state to NOLINK.
+ * - If aneg finishes with link, it sets the state to RUNNING,
+ *   and calls adjust_link
+ * - If autonegotiation did not finish after an arbitrary amount
+ *   of time, autonegotiation should be tried again if the PHY
+ *   supports "magic" autonegotiation (back to AN)
+ * - If it didn't finish, and no magic_aneg, move to FORCING.
+ *
+ * NOLINK: PHY is up, but not currently plugged in.
+ * - If the timer notes that the link comes back, we move to RUNNING
+ * - config_aneg moves to AN
+ * - phy_stop moves to HALTED
+ *
+ * FORCING: PHY is being configured with forced settings
+ * - if link is up, move to RUNNING
+ * - If link is down, we drop to the next highest setting, and
+ *   retry (FORCING) after a timeout
+ * - phy_stop moves to HALTED
+ *
+ * RUNNING: PHY is currently up, running, and possibly sending
+ * and/or receiving packets
+ * - timer will set CHANGELINK if we're polling (this ensures the
+ *   link state is polled every other cycle of this state machine,
+ *   which makes it every other second)
+ * - irq will set CHANGELINK
+ * - config_aneg will set AN
+ * - phy_stop moves to HALTED
+ *
+ * CHANGELINK: PHY experienced a change in link state
+ * - timer moves to RUNNING if link
+ * - timer moves to NOLINK if the link is down
+ * - phy_stop moves to HALTED
+ *
+ * HALTED: PHY is up, but no polling or interrupts are done. Or
+ * PHY is in an error state.
+ *
+ * - phy_start moves to RESUMING
+ *
+ * RESUMING: PHY was halted, but now wants to run again.
+ * - If we are forcing, or aneg is done, timer moves to RUNNING
+ * - If aneg is not done, timer moves to AN
+ * - phy_stop moves to HALTED
+ */
+enum phy_state {
+	PHY_DOWN=0,
+	PHY_STARTING,
+	PHY_READY,
+	PHY_PENDING,
+	PHY_UP,
+	PHY_AN,
+	PHY_RUNNING,
+	PHY_NOLINK,
+	PHY_FORCING,
+	PHY_CHANGELINK,
+	PHY_HALTED,
+	PHY_RESUMING
+};
+
+/* phy_device: An instance of a PHY
+ *
+ * drv: Pointer to the driver for this PHY instance
+ * bus: Pointer to the bus this PHY is on
+ * dev: driver model device structure for this PHY
+ * phy_id: UID for this device found during discovery
+ * state: state of the PHY for management purposes
+ * dev_flags: Device-specific flags used by the PHY driver.
+ * addr: Bus address of PHY
+ * link_timeout: The number of timer firings to wait before the
+ * giving up on the current attempt at acquiring a link
+ * irq: IRQ number of the PHY's interrupt (-1 if none)
+ * phy_timer: The timer for handling the state machine
+ * phy_queue: A work_queue for the interrupt
+ * attached_dev: The attached enet driver's device instance ptr
+ * adjust_link: Callback for the enet controller to respond to
+ * changes in the link state.
+ * adjust_state: Callback for the enet driver to respond to
+ * changes in the state machine.
+ *
+ * speed, duplex, pause, supported, advertising, and
+ * autoneg are used like in mii_if_info
+ *
+ * interrupts currently only supports enabled or disabled,
+ * but could be changed in the future to support enabling
+ * and disabling specific interrupts
+ *
+ * Contains some infrastructure for polling and interrupt
+ * handling, as well as handling shifts in PHY hardware state
+ */
+struct phy_device {
+	/* Information about the PHY type */
+	/* And management functions */
+	struct phy_driver *drv;
+
+	struct mii_bus *bus;
+
+	struct device dev;
+
+	u32 phy_id;
+
+	enum phy_state state;
+
+	u32 dev_flags;
+
+	/* Bus address of the PHY (0-32) */
+	int addr;
+
+	/* forced speed & duplex (no autoneg)
+	 * partner speed & duplex & pause (autoneg)
+	 */
+	int speed;
+	int duplex;
+	int pause;
+	int asym_pause;
+
+	/* The most recently read link state */
+	int link;
+
+	/* Enabled Interrupts */
+	u32 interrupts;
+
+	/* Union of PHY and Attached devices' supported modes */
+	/* See mii.h for more info */
+	u32 supported;
+	u32 advertising;
+
+	int autoneg;
+
+	int link_timeout;
+
+	/* Interrupt number for this PHY
+	 * -1 means no interrupt */
+	int irq;
+
+	/* private data pointer */
+	/* For use by PHYs to maintain extra state */
+	void *priv;
+
+	/* Interrupt and Polling infrastructure */
+	struct work_struct phy_queue;
+	struct timer_list phy_timer;
+
+	spinlock_t lock;
+
+	struct net_device *attached_dev;
+
+	void (*adjust_link)(struct net_device *dev);
+
+	void (*adjust_state)(struct net_device *dev);
+};
+#define to_phy_device(d) container_of(d, struct phy_device, dev)
+
+/* struct phy_driver: Driver structure for a particular PHY type
+ *
+ * phy_id: The result of reading the UID registers of this PHY
+ *   type, and ANDing them with the phy_id_mask.  This driver
+ *   only works for PHYs with IDs which match this field
+ * name: The friendly name of this PHY type
+ * phy_id_mask: Defines the important bits of the phy_id
+ * features: A list of features (speed, duplex, etc) supported
+ *   by this PHY
+ * flags: A bitfield defining certain other features this PHY
+ *   supports (like interrupts)
+ *
+ * The drivers must implement config_aneg and read_status.  All
+ * other functions are optional. Note that none of these
+ * functions should be called from interrupt time.  The goal is
+ * for the bus read/write functions to be able to block when the
+ * bus transaction is happening, and be freed up by an interrupt
+ * (The MPC85xx has this ability, though it is not currently
+ * supported in the driver).
+ */
+struct phy_driver {
+	u32 phy_id;
+	char *name;
+	unsigned int phy_id_mask;
+	u32 features;
+	u32 flags;
+
+	/* Called to initialize the PHY,
+	 * including after a reset */
+	int (*config_init)(struct phy_device *phydev);
+
+	/* Called during discovery.  Used to set
+	 * up device-specific structures, if any */
+	int (*probe)(struct phy_device *phydev);
+
+	/* PHY Power Management */
+	int (*suspend)(struct phy_device *phydev);
+	int (*resume)(struct phy_device *phydev);
+
+	/* Configures the advertisement and resets
+	 * autonegotiation if phydev->autoneg is on,
+	 * forces the speed to the current settings in phydev
+	 * if phydev->autoneg is off */
+	int (*config_aneg)(struct phy_device *phydev);
+
+	/* Determines the negotiated speed and duplex */
+	int (*read_status)(struct phy_device *phydev);
+
+	/* Clears any pending interrupts */
+	int (*ack_interrupt)(struct phy_device *phydev);
+
+	/* Enables or disables interrupts */
+	int (*config_intr)(struct phy_device *phydev);
+
+	/* Clears up any memory if needed */
+	void (*remove)(struct phy_device *phydev);
+
+	struct device_driver driver;
+};
+#define to_phy_driver(d) container_of(d, struct phy_driver, driver)
+
+int phy_read(struct phy_device *phydev, u16 regnum);
+int phy_write(struct phy_device *phydev, u16 regnum, u16 val);
+struct phy_device* get_phy_device(struct mii_bus *bus, int addr);
+int phy_clear_interrupt(struct phy_device *phydev);
+int phy_config_interrupt(struct phy_device *phydev, u32 interrupts);
+struct phy_device * phy_attach(struct net_device *dev,
+		const char *phy_id, u32 flags);
+struct phy_device * phy_connect(struct net_device *dev, const char *phy_id,
+		void (*handler)(struct net_device *), u32 flags);
+void phy_disconnect(struct phy_device *phydev);
+void phy_detach(struct phy_device *phydev);
+void phy_start(struct phy_device *phydev);
+void phy_stop(struct phy_device *phydev);
+int phy_start_aneg(struct phy_device *phydev);
+
+int mdiobus_register(struct mii_bus *bus);
+void mdiobus_unregister(struct mii_bus *bus);
+void phy_sanitize_settings(struct phy_device *phydev);
+int phy_stop_interrupts(struct phy_device *phydev);
+
+static inline int phy_read_status(struct phy_device *phydev) {
+	return phydev->drv->read_status(phydev);
+}
+
+int genphy_config_advert(struct phy_device *phydev);
+int genphy_setup_forced(struct phy_device *phydev);
+int genphy_restart_aneg(struct phy_device *phydev);
+int genphy_config_aneg(struct phy_device *phydev);
+int genphy_update_link(struct phy_device *phydev);
+int genphy_read_status(struct phy_device *phydev);
+void phy_driver_unregister(struct phy_driver *drv);
+int phy_driver_register(struct phy_driver *new_driver);
+void phy_prepare_link(struct phy_device *phydev,
+		void (*adjust_link)(struct net_device *));
+void phy_start_machine(struct phy_device *phydev,
+		void (*handler)(struct net_device *));
+void phy_stop_machine(struct phy_device *phydev);
+int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
+int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
+int phy_mii_ioctl(struct phy_device *phydev,
+		struct mii_ioctl_data *mii_data, int cmd);
+int phy_start_interrupts(struct phy_device *phydev);
+void phy_print_status(struct phy_device *phydev);
+
+extern struct bus_type mdio_bus_type;
+#endif /* __PHY_H */
diff --git a/include/linux/serialP.h b/include/linux/serialP.h
index 2b2f35a64d75..2b9e6b9554d5 100644
--- a/include/linux/serialP.h
+++ b/include/linux/serialP.h
@@ -140,44 +140,4 @@ struct rs_multiport_struct {
 #define ALPHA_KLUDGE_MCR 0
 #endif
 
-/*
- * Definitions for PCI support.
- */
-#define SPCI_FL_BASE_MASK	0x0007
-#define SPCI_FL_BASE0	0x0000
-#define SPCI_FL_BASE1	0x0001
-#define SPCI_FL_BASE2	0x0002
-#define SPCI_FL_BASE3	0x0003
-#define SPCI_FL_BASE4	0x0004
-#define SPCI_FL_GET_BASE(x)	(x & SPCI_FL_BASE_MASK)
-
-#define SPCI_FL_IRQ_MASK       (0x0007 << 4)
-#define SPCI_FL_IRQBASE0       (0x0000 << 4)
-#define SPCI_FL_IRQBASE1       (0x0001 << 4)
-#define SPCI_FL_IRQBASE2       (0x0002 << 4)
-#define SPCI_FL_IRQBASE3       (0x0003 << 4)
-#define SPCI_FL_IRQBASE4       (0x0004 << 4)
-#define SPCI_FL_GET_IRQBASE(x)        ((x & SPCI_FL_IRQ_MASK) >> 4)
-
-/* Use successive BARs (PCI base address registers), 
-   else use offset into some specified BAR */
-#define SPCI_FL_BASE_TABLE	0x0100
-
-/* Use successive entries in the irq resource table */
-#define SPCI_FL_IRQ_TABLE	0x0200
-
-/* Use the irq resource table instead of dev->irq */
-#define SPCI_FL_IRQRESOURCE	0x0400
-
-/* Use the Base address register size to cap number of ports */
-#define SPCI_FL_REGION_SZ_CAP	0x0800
-
-/* Do not use irq sharing for this device */
-#define SPCI_FL_NO_SHIRQ	0x1000
-
-/* This is a PNP device */
-#define SPCI_FL_ISPNP		0x2000
-
-#define SPCI_FL_PNPDEFAULT	(SPCI_FL_IRQRESOURCE|SPCI_FL_ISPNP)
-
 #endif /* _LINUX_SERIAL_H */
diff --git a/include/rdma/ib_cache.h b/include/rdma/ib_cache.h
new file mode 100644
index 000000000000..5bf9834f7dca
--- /dev/null
+++ b/include/rdma/ib_cache.h
@@ -0,0 +1,105 @@
+/*
+ * Copyright (c) 2004 Topspin Communications.  All rights reserved.
+ * Copyright (c) 2005 Intel Corporation. All rights reserved.
+ * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * $Id: ib_cache.h 1349 2004-12-16 21:09:43Z roland $
+ */
+
+#ifndef _IB_CACHE_H
+#define _IB_CACHE_H
+
+#include <rdma/ib_verbs.h>
+
+/**
+ * ib_get_cached_gid - Returns a cached GID table entry
+ * @device: The device to query.
+ * @port_num: The port number of the device to query.
+ * @index: The index into the cached GID table to query.
+ * @gid: The GID value found at the specified index.
+ *
+ * ib_get_cached_gid() fetches the specified GID table entry stored in
+ * the local software cache.
+ */
+int ib_get_cached_gid(struct ib_device    *device,
+		      u8                   port_num,
+		      int                  index,
+		      union ib_gid        *gid);
+
+/**
+ * ib_find_cached_gid - Returns the port number and GID table index where
+ *   a specified GID value occurs.
+ * @device: The device to query.
+ * @gid: The GID value to search for.
+ * @port_num: The port number of the device where the GID value was found.
+ * @index: The index into the cached GID table where the GID was found.  This
+ *   parameter may be NULL.
+ *
+ * ib_find_cached_gid() searches for the specified GID value in
+ * the local software cache.
+ */
+int ib_find_cached_gid(struct ib_device *device,
+		       union ib_gid	*gid,
+		       u8               *port_num,
+		       u16              *index);
+
+/**
+ * ib_get_cached_pkey - Returns a cached PKey table entry
+ * @device: The device to query.
+ * @port_num: The port number of the device to query.
+ * @index: The index into the cached PKey table to query.
+ * @pkey: The PKey value found at the specified index.
+ *
+ * ib_get_cached_pkey() fetches the specified PKey table entry stored in
+ * the local software cache.
+ */
+int ib_get_cached_pkey(struct ib_device    *device_handle,
+		       u8                   port_num,
+		       int                  index,
+		       u16                 *pkey);
+
+/**
+ * ib_find_cached_pkey - Returns the PKey table index where a specified
+ *   PKey value occurs.
+ * @device: The device to query.
+ * @port_num: The port number of the device to search for the PKey.
+ * @pkey: The PKey value to search for.
+ * @index: The index into the cached PKey table where the PKey was found.
+ *
+ * ib_find_cached_pkey() searches the specified PKey table in
+ * the local software cache.
+ */
+int ib_find_cached_pkey(struct ib_device    *device,
+			u8                   port_num,
+			u16                  pkey,
+			u16                 *index);
+
+#endif /* _IB_CACHE_H */
diff --git a/include/rdma/ib_cm.h b/include/rdma/ib_cm.h
new file mode 100644
index 000000000000..77fe9039209b
--- /dev/null
+++ b/include/rdma/ib_cm.h
@@ -0,0 +1,568 @@
+/*
+ * Copyright (c) 2004 Intel Corporation.  All rights reserved.
+ * Copyright (c) 2004 Topspin Corporation.  All rights reserved.
+ * Copyright (c) 2004 Voltaire Corporation.  All rights reserved.
+ * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * $Id: ib_cm.h 2730 2005-06-28 16:43:03Z sean.hefty $
+ */
+#if !defined(IB_CM_H)
+#define IB_CM_H
+
+#include <rdma/ib_mad.h>
+#include <rdma/ib_sa.h>
+
+enum ib_cm_state {
+	IB_CM_IDLE,
+	IB_CM_LISTEN,
+	IB_CM_REQ_SENT,
+	IB_CM_REQ_RCVD,
+	IB_CM_MRA_REQ_SENT,
+	IB_CM_MRA_REQ_RCVD,
+	IB_CM_REP_SENT,
+	IB_CM_REP_RCVD,
+	IB_CM_MRA_REP_SENT,
+	IB_CM_MRA_REP_RCVD,
+	IB_CM_ESTABLISHED,
+	IB_CM_DREQ_SENT,
+	IB_CM_DREQ_RCVD,
+	IB_CM_TIMEWAIT,
+	IB_CM_SIDR_REQ_SENT,
+	IB_CM_SIDR_REQ_RCVD
+};
+
+enum ib_cm_lap_state {
+	IB_CM_LAP_IDLE,
+	IB_CM_LAP_SENT,
+	IB_CM_LAP_RCVD,
+	IB_CM_MRA_LAP_SENT,
+	IB_CM_MRA_LAP_RCVD,
+};
+
+enum ib_cm_event_type {
+	IB_CM_REQ_ERROR,
+	IB_CM_REQ_RECEIVED,
+	IB_CM_REP_ERROR,
+	IB_CM_REP_RECEIVED,
+	IB_CM_RTU_RECEIVED,
+	IB_CM_USER_ESTABLISHED,
+	IB_CM_DREQ_ERROR,
+	IB_CM_DREQ_RECEIVED,
+	IB_CM_DREP_RECEIVED,
+	IB_CM_TIMEWAIT_EXIT,
+	IB_CM_MRA_RECEIVED,
+	IB_CM_REJ_RECEIVED,
+	IB_CM_LAP_ERROR,
+	IB_CM_LAP_RECEIVED,
+	IB_CM_APR_RECEIVED,
+	IB_CM_SIDR_REQ_ERROR,
+	IB_CM_SIDR_REQ_RECEIVED,
+	IB_CM_SIDR_REP_RECEIVED
+};
+
+enum ib_cm_data_size {
+	IB_CM_REQ_PRIVATE_DATA_SIZE	 = 92,
+	IB_CM_MRA_PRIVATE_DATA_SIZE	 = 222,
+	IB_CM_REJ_PRIVATE_DATA_SIZE	 = 148,
+	IB_CM_REP_PRIVATE_DATA_SIZE	 = 196,
+	IB_CM_RTU_PRIVATE_DATA_SIZE	 = 224,
+	IB_CM_DREQ_PRIVATE_DATA_SIZE	 = 220,
+	IB_CM_DREP_PRIVATE_DATA_SIZE	 = 224,
+	IB_CM_REJ_ARI_LENGTH		 = 72,
+	IB_CM_LAP_PRIVATE_DATA_SIZE	 = 168,
+	IB_CM_APR_PRIVATE_DATA_SIZE	 = 148,
+	IB_CM_APR_INFO_LENGTH		 = 72,
+	IB_CM_SIDR_REQ_PRIVATE_DATA_SIZE = 216,
+	IB_CM_SIDR_REP_PRIVATE_DATA_SIZE = 136,
+	IB_CM_SIDR_REP_INFO_LENGTH	 = 72
+};
+
+struct ib_cm_id;
+
+struct ib_cm_req_event_param {
+	struct ib_cm_id		*listen_id;
+	struct ib_device	*device;
+	u8			port;
+
+	struct ib_sa_path_rec	*primary_path;
+	struct ib_sa_path_rec	*alternate_path;
+
+	__be64			remote_ca_guid;
+	u32			remote_qkey;
+	u32			remote_qpn;
+	enum ib_qp_type		qp_type;
+
+	u32			starting_psn;
+	u8			responder_resources;
+	u8			initiator_depth;
+	unsigned int		local_cm_response_timeout:5;
+	unsigned int		flow_control:1;
+	unsigned int		remote_cm_response_timeout:5;
+	unsigned int		retry_count:3;
+	unsigned int		rnr_retry_count:3;
+	unsigned int		srq:1;
+};
+
+struct ib_cm_rep_event_param {
+	__be64			remote_ca_guid;
+	u32			remote_qkey;
+	u32			remote_qpn;
+	u32			starting_psn;
+	u8			responder_resources;
+	u8			initiator_depth;
+	unsigned int		target_ack_delay:5;
+	unsigned int		failover_accepted:2;
+	unsigned int		flow_control:1;
+	unsigned int		rnr_retry_count:3;
+	unsigned int		srq:1;
+};
+
+enum ib_cm_rej_reason {
+	IB_CM_REJ_NO_QP				= 1,
+	IB_CM_REJ_NO_EEC			= 2,
+	IB_CM_REJ_NO_RESOURCES			= 3,
+	IB_CM_REJ_TIMEOUT			= 4,
+	IB_CM_REJ_UNSUPPORTED			= 5,
+	IB_CM_REJ_INVALID_COMM_ID		= 6,
+	IB_CM_REJ_INVALID_COMM_INSTANCE		= 7,
+	IB_CM_REJ_INVALID_SERVICE_ID		= 8,
+	IB_CM_REJ_INVALID_TRANSPORT_TYPE	= 9,
+	IB_CM_REJ_STALE_CONN			= 10,
+	IB_CM_REJ_RDC_NOT_EXIST			= 11,
+	IB_CM_REJ_INVALID_GID			= 12,
+	IB_CM_REJ_INVALID_LID			= 13,
+	IB_CM_REJ_INVALID_SL			= 14,
+	IB_CM_REJ_INVALID_TRAFFIC_CLASS		= 15,
+	IB_CM_REJ_INVALID_HOP_LIMIT		= 16,
+	IB_CM_REJ_INVALID_PACKET_RATE		= 17,
+	IB_CM_REJ_INVALID_ALT_GID		= 18,
+	IB_CM_REJ_INVALID_ALT_LID		= 19,
+	IB_CM_REJ_INVALID_ALT_SL		= 20,
+	IB_CM_REJ_INVALID_ALT_TRAFFIC_CLASS	= 21,
+	IB_CM_REJ_INVALID_ALT_HOP_LIMIT		= 22,
+	IB_CM_REJ_INVALID_ALT_PACKET_RATE	= 23,
+	IB_CM_REJ_PORT_CM_REDIRECT		= 24,
+	IB_CM_REJ_PORT_REDIRECT			= 25,
+	IB_CM_REJ_INVALID_MTU			= 26,
+	IB_CM_REJ_INSUFFICIENT_RESP_RESOURCES	= 27,
+	IB_CM_REJ_CONSUMER_DEFINED		= 28,
+	IB_CM_REJ_INVALID_RNR_RETRY		= 29,
+	IB_CM_REJ_DUPLICATE_LOCAL_COMM_ID	= 30,
+	IB_CM_REJ_INVALID_CLASS_VERSION		= 31,
+	IB_CM_REJ_INVALID_FLOW_LABEL		= 32,
+	IB_CM_REJ_INVALID_ALT_FLOW_LABEL	= 33
+};
+
+struct ib_cm_rej_event_param {
+	enum ib_cm_rej_reason	reason;
+	void			*ari;
+	u8			ari_length;
+};
+
+struct ib_cm_mra_event_param {
+	u8	service_timeout;
+};
+
+struct ib_cm_lap_event_param {
+	struct ib_sa_path_rec	*alternate_path;
+};
+
+enum ib_cm_apr_status {
+	IB_CM_APR_SUCCESS,
+	IB_CM_APR_INVALID_COMM_ID,
+	IB_CM_APR_UNSUPPORTED,
+	IB_CM_APR_REJECT,
+	IB_CM_APR_REDIRECT,
+	IB_CM_APR_IS_CURRENT,
+	IB_CM_APR_INVALID_QPN_EECN,
+	IB_CM_APR_INVALID_LID,
+	IB_CM_APR_INVALID_GID,
+	IB_CM_APR_INVALID_FLOW_LABEL,
+	IB_CM_APR_INVALID_TCLASS,
+	IB_CM_APR_INVALID_HOP_LIMIT,
+	IB_CM_APR_INVALID_PACKET_RATE,
+	IB_CM_APR_INVALID_SL
+};
+
+struct ib_cm_apr_event_param {
+	enum ib_cm_apr_status	ap_status;
+	void			*apr_info;
+	u8			info_len;
+};
+
+struct ib_cm_sidr_req_event_param {
+	struct ib_cm_id		*listen_id;
+	struct ib_device	*device;
+	u8			port;
+	u16			pkey;
+};
+
+enum ib_cm_sidr_status {
+	IB_SIDR_SUCCESS,
+	IB_SIDR_UNSUPPORTED,
+	IB_SIDR_REJECT,
+	IB_SIDR_NO_QP,
+	IB_SIDR_REDIRECT,
+	IB_SIDR_UNSUPPORTED_VERSION
+};
+
+struct ib_cm_sidr_rep_event_param {
+	enum ib_cm_sidr_status	status;
+	u32			qkey;
+	u32			qpn;
+	void			*info;
+	u8			info_len;
+
+};
+
+struct ib_cm_event {
+	enum ib_cm_event_type	event;
+	union {
+		struct ib_cm_req_event_param	req_rcvd;
+		struct ib_cm_rep_event_param	rep_rcvd;
+		/* No data for RTU received events. */
+		struct ib_cm_rej_event_param	rej_rcvd;
+		struct ib_cm_mra_event_param	mra_rcvd;
+		struct ib_cm_lap_event_param	lap_rcvd;
+		struct ib_cm_apr_event_param	apr_rcvd;
+		/* No data for DREQ/DREP received events. */
+		struct ib_cm_sidr_req_event_param sidr_req_rcvd;
+		struct ib_cm_sidr_rep_event_param sidr_rep_rcvd;
+		enum ib_wc_status		send_status;
+	} param;
+
+	void			*private_data;
+};
+
+/**
+ * ib_cm_handler - User-defined callback to process communication events.
+ * @cm_id: Communication identifier associated with the reported event.
+ * @event: Information about the communication event.
+ *
+ * IB_CM_REQ_RECEIVED and IB_CM_SIDR_REQ_RECEIVED communication events
+ * generated as a result of listen requests result in the allocation of a
+ * new @cm_id.  The new @cm_id is returned to the user through this callback.
+ * Clients are responsible for destroying the new @cm_id.  For peer-to-peer
+ * IB_CM_REQ_RECEIVED and all other events, the returned @cm_id corresponds
+ * to a user's existing communication identifier.
+ *
+ * Users may not call ib_destroy_cm_id while in the context of this callback;
+ * however, returning a non-zero value instructs the communication manager to
+ * destroy the @cm_id after the callback completes.
+ */
+typedef int (*ib_cm_handler)(struct ib_cm_id *cm_id,
+			     struct ib_cm_event *event);
+
+struct ib_cm_id {
+	ib_cm_handler		cm_handler;
+	void			*context;
+	__be64			service_id;
+	__be64			service_mask;
+	enum ib_cm_state	state;		/* internal CM/debug use */
+	enum ib_cm_lap_state	lap_state;	/* internal CM/debug use */
+	__be32			local_id;
+	__be32			remote_id;
+};
+
+/**
+ * ib_create_cm_id - Allocate a communication identifier.
+ * @cm_handler: Callback invoked to notify the user of CM events.
+ * @context: User specified context associated with the communication
+ *   identifier.
+ *
+ * Communication identifiers are used to track connection states, service
+ * ID resolution requests, and listen requests.
+ */
+struct ib_cm_id *ib_create_cm_id(ib_cm_handler cm_handler,
+				 void *context);
+
+/**
+ * ib_destroy_cm_id - Destroy a connection identifier.
+ * @cm_id: Connection identifier to destroy.
+ *
+ * This call blocks until the connection identifier is destroyed.
+ */
+void ib_destroy_cm_id(struct ib_cm_id *cm_id);
+
+#define IB_SERVICE_ID_AGN_MASK	__constant_cpu_to_be64(0xFF00000000000000ULL)
+#define IB_CM_ASSIGN_SERVICE_ID __constant_cpu_to_be64(0x0200000000000000ULL)
+
+/**
+ * ib_cm_listen - Initiates listening on the specified service ID for
+ *   connection and service ID resolution requests.
+ * @cm_id: Connection identifier associated with the listen request.
+ * @service_id: Service identifier matched against incoming connection
+ *   and service ID resolution requests.  The service ID should be specified
+ *   network-byte order.  If set to IB_CM_ASSIGN_SERVICE_ID, the CM will
+ *   assign a service ID to the caller.
+ * @service_mask: Mask applied to service ID used to listen across a
+ *   range of service IDs.  If set to 0, the service ID is matched
+ *   exactly.  This parameter is ignored if %service_id is set to
+ *   IB_CM_ASSIGN_SERVICE_ID.
+ */
+int ib_cm_listen(struct ib_cm_id *cm_id,
+		 __be64 service_id,
+		 __be64 service_mask);
+
+struct ib_cm_req_param {
+	struct ib_sa_path_rec	*primary_path;
+	struct ib_sa_path_rec	*alternate_path;
+	__be64			service_id;
+	u32			qp_num;
+	enum ib_qp_type		qp_type;
+	u32			starting_psn;
+	const void		*private_data;
+	u8			private_data_len;
+	u8			peer_to_peer;
+	u8			responder_resources;
+	u8			initiator_depth;
+	u8			remote_cm_response_timeout;
+	u8			flow_control;
+	u8			local_cm_response_timeout;
+	u8			retry_count;
+	u8			rnr_retry_count;
+	u8			max_cm_retries;
+	u8			srq;
+};
+
+/**
+ * ib_send_cm_req - Sends a connection request to the remote node.
+ * @cm_id: Connection identifier that will be associated with the
+ *   connection request.
+ * @param: Connection request information needed to establish the
+ *   connection.
+ */
+int ib_send_cm_req(struct ib_cm_id *cm_id,
+		   struct ib_cm_req_param *param);
+
+struct ib_cm_rep_param {
+	u32		qp_num;
+	u32		starting_psn;
+	const void	*private_data;
+	u8		private_data_len;
+	u8		responder_resources;
+	u8		initiator_depth;
+	u8		target_ack_delay;
+	u8		failover_accepted;
+	u8		flow_control;
+	u8		rnr_retry_count;
+	u8		srq;
+};
+
+/**
+ * ib_send_cm_rep - Sends a connection reply in response to a connection
+ *   request.
+ * @cm_id: Connection identifier that will be associated with the
+ *   connection request.
+ * @param: Connection reply information needed to establish the
+ *   connection.
+ */
+int ib_send_cm_rep(struct ib_cm_id *cm_id,
+		   struct ib_cm_rep_param *param);
+
+/**
+ * ib_send_cm_rtu - Sends a connection ready to use message in response
+ *   to a connection reply message.
+ * @cm_id: Connection identifier associated with the connection request.
+ * @private_data: Optional user-defined private data sent with the
+ *   ready to use message.
+ * @private_data_len: Size of the private data buffer, in bytes.
+ */
+int ib_send_cm_rtu(struct ib_cm_id *cm_id,
+		   const void *private_data,
+		   u8 private_data_len);
+
+/**
+ * ib_send_cm_dreq - Sends a disconnection request for an existing
+ *   connection.
+ * @cm_id: Connection identifier associated with the connection being
+ *   released.
+ * @private_data: Optional user-defined private data sent with the
+ *   disconnection request message.
+ * @private_data_len: Size of the private data buffer, in bytes.
+ */
+int ib_send_cm_dreq(struct ib_cm_id *cm_id,
+		    const void *private_data,
+		    u8 private_data_len);
+
+/**
+ * ib_send_cm_drep - Sends a disconnection reply to a disconnection request.
+ * @cm_id: Connection identifier associated with the connection being
+ *   released.
+ * @private_data: Optional user-defined private data sent with the
+ *   disconnection reply message.
+ * @private_data_len: Size of the private data buffer, in bytes.
+ *
+ * If the cm_id is in the correct state, the CM will transition the connection
+ * to the timewait state, even if an error occurs sending the DREP message.
+ */
+int ib_send_cm_drep(struct ib_cm_id *cm_id,
+		    const void *private_data,
+		    u8 private_data_len);
+
+/**
+ * ib_cm_establish - Forces a connection state to established.
+ * @cm_id: Connection identifier to transition to established.
+ *
+ * This routine should be invoked by users who receive messages on a
+ * connected QP before an RTU has been received.
+ */
+int ib_cm_establish(struct ib_cm_id *cm_id);
+
+/**
+ * ib_send_cm_rej - Sends a connection rejection message to the
+ *   remote node.
+ * @cm_id: Connection identifier associated with the connection being
+ *   rejected.
+ * @reason: Reason for the connection request rejection.
+ * @ari: Optional additional rejection information.
+ * @ari_length: Size of the additional rejection information, in bytes.
+ * @private_data: Optional user-defined private data sent with the
+ *   rejection message.
+ * @private_data_len: Size of the private data buffer, in bytes.
+ */
+int ib_send_cm_rej(struct ib_cm_id *cm_id,
+		   enum ib_cm_rej_reason reason,
+		   void *ari,
+		   u8 ari_length,
+		   const void *private_data,
+		   u8 private_data_len);
+
+/**
+ * ib_send_cm_mra - Sends a message receipt acknowledgement to a connection
+ *   message.
+ * @cm_id: Connection identifier associated with the connection message.
+ * @service_timeout: The maximum time required for the sender to reply to
+ *   to the connection message.
+ * @private_data: Optional user-defined private data sent with the
+ *   message receipt acknowledgement.
+ * @private_data_len: Size of the private data buffer, in bytes.
+ */
+int ib_send_cm_mra(struct ib_cm_id *cm_id,
+		   u8 service_timeout,
+		   const void *private_data,
+		   u8 private_data_len);
+
+/**
+ * ib_send_cm_lap - Sends a load alternate path request.
+ * @cm_id: Connection identifier associated with the load alternate path
+ *   message.
+ * @alternate_path: A path record that identifies the alternate path to
+ *   load.
+ * @private_data: Optional user-defined private data sent with the
+ *   load alternate path message.
+ * @private_data_len: Size of the private data buffer, in bytes.
+ */
+int ib_send_cm_lap(struct ib_cm_id *cm_id,
+		   struct ib_sa_path_rec *alternate_path,
+		   const void *private_data,
+		   u8 private_data_len);
+
+/**
+ * ib_cm_init_qp_attr - Initializes the QP attributes for use in transitioning
+ *   to a specified QP state.
+ * @cm_id: Communication identifier associated with the QP attributes to
+ *   initialize.
+ * @qp_attr: On input, specifies the desired QP state.  On output, the
+ *   mandatory and desired optional attributes will be set in order to
+ *   modify the QP to the specified state.
+ * @qp_attr_mask: The QP attribute mask that may be used to transition the
+ *   QP to the specified state.
+ *
+ * Users must set the @qp_attr->qp_state to the desired QP state.  This call
+ * will set all required attributes for the given transition, along with
+ * known optional attributes.  Users may override the attributes returned from
+ * this call before calling ib_modify_qp.
+ */
+int ib_cm_init_qp_attr(struct ib_cm_id *cm_id,
+		       struct ib_qp_attr *qp_attr,
+		       int *qp_attr_mask);
+
+/**
+ * ib_send_cm_apr - Sends an alternate path response message in response to
+ *   a load alternate path request.
+ * @cm_id: Connection identifier associated with the alternate path response.
+ * @status: Reply status sent with the alternate path response.
+ * @info: Optional additional information sent with the alternate path
+ *   response.
+ * @info_length: Size of the additional information, in bytes.
+ * @private_data: Optional user-defined private data sent with the
+ *   alternate path response message.
+ * @private_data_len: Size of the private data buffer, in bytes.
+ */
+int ib_send_cm_apr(struct ib_cm_id *cm_id,
+		   enum ib_cm_apr_status status,
+		   void *info,
+		   u8 info_length,
+		   const void *private_data,
+		   u8 private_data_len);
+
+struct ib_cm_sidr_req_param {
+	struct ib_sa_path_rec	*path;
+	__be64			service_id;
+	int			timeout_ms;
+	const void		*private_data;
+	u8			private_data_len;
+	u8			max_cm_retries;
+	u16			pkey;
+};
+
+/**
+ * ib_send_cm_sidr_req - Sends a service ID resolution request to the
+ *   remote node.
+ * @cm_id: Communication identifier that will be associated with the
+ *   service ID resolution request.
+ * @param: Service ID resolution request information.
+ */
+int ib_send_cm_sidr_req(struct ib_cm_id *cm_id,
+			struct ib_cm_sidr_req_param *param);
+
+struct ib_cm_sidr_rep_param {
+	u32			qp_num;
+	u32			qkey;
+	enum ib_cm_sidr_status	status;
+	const void		*info;
+	u8			info_length;
+	const void		*private_data;
+	u8			private_data_len;
+};
+
+/**
+ * ib_send_cm_sidr_rep - Sends a service ID resolution request to the
+ *   remote node.
+ * @cm_id: Communication identifier associated with the received service ID
+ *   resolution request.
+ * @param: Service ID resolution reply information.
+ */
+int ib_send_cm_sidr_rep(struct ib_cm_id *cm_id,
+			struct ib_cm_sidr_rep_param *param);
+
+#endif /* IB_CM_H */
diff --git a/include/rdma/ib_fmr_pool.h b/include/rdma/ib_fmr_pool.h
new file mode 100644
index 000000000000..86b7e93f198b
--- /dev/null
+++ b/include/rdma/ib_fmr_pool.h
@@ -0,0 +1,93 @@
+/*
+ * Copyright (c) 2004 Topspin Corporation.  All rights reserved.
+ * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * $Id: ib_fmr_pool.h 2730 2005-06-28 16:43:03Z sean.hefty $
+ */
+
+#if !defined(IB_FMR_POOL_H)
+#define IB_FMR_POOL_H
+
+#include <rdma/ib_verbs.h>
+
+struct ib_fmr_pool;
+
+/**
+ * struct ib_fmr_pool_param - Parameters for creating FMR pool
+ * @max_pages_per_fmr:Maximum number of pages per map request.
+ * @access:Access flags for FMRs in pool.
+ * @pool_size:Number of FMRs to allocate for pool.
+ * @dirty_watermark:Flush is triggered when @dirty_watermark dirty
+ *     FMRs are present.
+ * @flush_function:Callback called when unmapped FMRs are flushed and
+ *     more FMRs are possibly available for mapping
+ * @flush_arg:Context passed to user's flush function.
+ * @cache:If set, FMRs may be reused after unmapping for identical map
+ *     requests.
+ */
+struct ib_fmr_pool_param {
+	int                     max_pages_per_fmr;
+	enum ib_access_flags    access;
+	int                     pool_size;
+	int                     dirty_watermark;
+	void                  (*flush_function)(struct ib_fmr_pool *pool,
+						void *              arg);
+	void                   *flush_arg;
+	unsigned                cache:1;
+};
+
+struct ib_pool_fmr {
+	struct ib_fmr      *fmr;
+	struct ib_fmr_pool *pool;
+	struct list_head    list;
+	struct hlist_node   cache_node;
+	int                 ref_count;
+	int                 remap_count;
+	u64                 io_virtual_address;
+	int                 page_list_len;
+	u64                 page_list[0];
+};
+
+struct ib_fmr_pool *ib_create_fmr_pool(struct ib_pd             *pd,
+				       struct ib_fmr_pool_param *params);
+
+void ib_destroy_fmr_pool(struct ib_fmr_pool *pool);
+
+int ib_flush_fmr_pool(struct ib_fmr_pool *pool);
+
+struct ib_pool_fmr *ib_fmr_pool_map_phys(struct ib_fmr_pool *pool_handle,
+					 u64                *page_list,
+					 int                 list_len,
+					 u64                *io_virtual_address);
+
+int ib_fmr_pool_unmap(struct ib_pool_fmr *fmr);
+
+#endif /* IB_FMR_POOL_H */
diff --git a/include/rdma/ib_mad.h b/include/rdma/ib_mad.h
new file mode 100644
index 000000000000..fc6b1c18ffc6
--- /dev/null
+++ b/include/rdma/ib_mad.h
@@ -0,0 +1,579 @@
+/*
+ * Copyright (c) 2004 Mellanox Technologies Ltd.  All rights reserved.
+ * Copyright (c) 2004 Infinicon Corporation.  All rights reserved.
+ * Copyright (c) 2004 Intel Corporation.  All rights reserved.
+ * Copyright (c) 2004 Topspin Corporation.  All rights reserved.
+ * Copyright (c) 2004 Voltaire Corporation.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * $Id: ib_mad.h 2775 2005-07-02 13:42:12Z halr $
+ */
+
+#if !defined( IB_MAD_H )
+#define IB_MAD_H
+
+#include <linux/pci.h>
+
+#include <rdma/ib_verbs.h>
+
+/* Management base version */
+#define IB_MGMT_BASE_VERSION			1
+
+/* Management classes */
+#define IB_MGMT_CLASS_SUBN_LID_ROUTED		0x01
+#define IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE	0x81
+#define IB_MGMT_CLASS_SUBN_ADM			0x03
+#define IB_MGMT_CLASS_PERF_MGMT			0x04
+#define IB_MGMT_CLASS_BM			0x05
+#define IB_MGMT_CLASS_DEVICE_MGMT		0x06
+#define IB_MGMT_CLASS_CM			0x07
+#define IB_MGMT_CLASS_SNMP			0x08
+#define IB_MGMT_CLASS_VENDOR_RANGE2_START	0x30
+#define IB_MGMT_CLASS_VENDOR_RANGE2_END		0x4F
+
+#define	IB_OPENIB_OUI				(0x001405)
+
+/* Management methods */
+#define IB_MGMT_METHOD_GET			0x01
+#define IB_MGMT_METHOD_SET			0x02
+#define IB_MGMT_METHOD_GET_RESP			0x81
+#define IB_MGMT_METHOD_SEND			0x03
+#define IB_MGMT_METHOD_TRAP			0x05
+#define IB_MGMT_METHOD_REPORT			0x06
+#define IB_MGMT_METHOD_REPORT_RESP		0x86
+#define IB_MGMT_METHOD_TRAP_REPRESS		0x07
+
+#define IB_MGMT_METHOD_RESP			0x80
+
+#define IB_MGMT_MAX_METHODS			128
+
+/* RMPP information */
+#define IB_MGMT_RMPP_VERSION			1
+
+#define IB_MGMT_RMPP_TYPE_DATA			1
+#define IB_MGMT_RMPP_TYPE_ACK			2
+#define IB_MGMT_RMPP_TYPE_STOP			3
+#define IB_MGMT_RMPP_TYPE_ABORT			4
+
+#define IB_MGMT_RMPP_FLAG_ACTIVE		1
+#define IB_MGMT_RMPP_FLAG_FIRST			(1<<1)
+#define IB_MGMT_RMPP_FLAG_LAST			(1<<2)
+
+#define IB_MGMT_RMPP_NO_RESPTIME		0x1F
+
+#define	IB_MGMT_RMPP_STATUS_SUCCESS		0
+#define	IB_MGMT_RMPP_STATUS_RESX		1
+#define	IB_MGMT_RMPP_STATUS_ABORT_MIN		118
+#define	IB_MGMT_RMPP_STATUS_T2L			118
+#define	IB_MGMT_RMPP_STATUS_BAD_LEN		119
+#define	IB_MGMT_RMPP_STATUS_BAD_SEG		120
+#define	IB_MGMT_RMPP_STATUS_BADT		121
+#define	IB_MGMT_RMPP_STATUS_W2S			122
+#define	IB_MGMT_RMPP_STATUS_S2B			123
+#define	IB_MGMT_RMPP_STATUS_BAD_STATUS		124
+#define	IB_MGMT_RMPP_STATUS_UNV			125
+#define	IB_MGMT_RMPP_STATUS_TMR			126
+#define	IB_MGMT_RMPP_STATUS_UNSPEC		127
+#define	IB_MGMT_RMPP_STATUS_ABORT_MAX		127
+
+#define IB_QP0		0
+#define IB_QP1		__constant_htonl(1)
+#define IB_QP1_QKEY	0x80010000
+#define IB_QP_SET_QKEY	0x80000000
+
+struct ib_mad_hdr {
+	u8	base_version;
+	u8	mgmt_class;
+	u8	class_version;
+	u8	method;
+	__be16	status;
+	__be16	class_specific;
+	__be64	tid;
+	__be16	attr_id;
+	__be16	resv;
+	__be32	attr_mod;
+};
+
+struct ib_rmpp_hdr {
+	u8	rmpp_version;
+	u8	rmpp_type;
+	u8	rmpp_rtime_flags;
+	u8	rmpp_status;
+	__be32	seg_num;
+	__be32	paylen_newwin;
+};
+
+typedef u64 __bitwise ib_sa_comp_mask;
+
+#define IB_SA_COMP_MASK(n) ((__force ib_sa_comp_mask) cpu_to_be64(1ull << n))
+
+/*
+ * ib_sa_hdr and ib_sa_mad structures must be packed because they have
+ * 64-bit fields that are only 32-bit aligned. 64-bit architectures will
+ * lay them out wrong otherwise.  (And unfortunately they are sent on
+ * the wire so we can't change the layout)
+ */
+struct ib_sa_hdr {
+	__be64			sm_key;
+	__be16			attr_offset;
+	__be16			reserved;
+	ib_sa_comp_mask		comp_mask;
+} __attribute__ ((packed));
+
+struct ib_mad {
+	struct ib_mad_hdr	mad_hdr;
+	u8			data[232];
+};
+
+struct ib_rmpp_mad {
+	struct ib_mad_hdr	mad_hdr;
+	struct ib_rmpp_hdr	rmpp_hdr;
+	u8			data[220];
+};
+
+struct ib_sa_mad {
+	struct ib_mad_hdr	mad_hdr;
+	struct ib_rmpp_hdr	rmpp_hdr;
+	struct ib_sa_hdr	sa_hdr;
+	u8			data[200];
+} __attribute__ ((packed));
+
+struct ib_vendor_mad {
+	struct ib_mad_hdr	mad_hdr;
+	struct ib_rmpp_hdr	rmpp_hdr;
+	u8			reserved;
+	u8			oui[3];
+	u8			data[216];
+};
+
+/**
+ * ib_mad_send_buf - MAD data buffer and work request for sends.
+ * @mad: References an allocated MAD data buffer.  The size of the data
+ *   buffer is specified in the @send_wr.length field.
+ * @mapping: DMA mapping information.
+ * @mad_agent: MAD agent that allocated the buffer.
+ * @context: User-controlled context fields.
+ * @send_wr: An initialized work request structure used when sending the MAD.
+ *   The wr_id field of the work request is initialized to reference this
+ *   data structure.
+ * @sge: A scatter-gather list referenced by the work request.
+ *
+ * Users are responsible for initializing the MAD buffer itself, with the
+ * exception of specifying the payload length field in any RMPP MAD.
+ */
+struct ib_mad_send_buf {
+	struct ib_mad		*mad;
+	DECLARE_PCI_UNMAP_ADDR(mapping)
+	struct ib_mad_agent	*mad_agent;
+	void			*context[2];
+	struct ib_send_wr	send_wr;
+	struct ib_sge		sge;
+};
+
+/**
+ * ib_get_rmpp_resptime - Returns the RMPP response time.
+ * @rmpp_hdr: An RMPP header.
+ */
+static inline u8 ib_get_rmpp_resptime(struct ib_rmpp_hdr *rmpp_hdr)
+{
+	return rmpp_hdr->rmpp_rtime_flags >> 3;
+}
+
+/**
+ * ib_get_rmpp_flags - Returns the RMPP flags.
+ * @rmpp_hdr: An RMPP header.
+ */
+static inline u8 ib_get_rmpp_flags(struct ib_rmpp_hdr *rmpp_hdr)
+{
+	return rmpp_hdr->rmpp_rtime_flags & 0x7;
+}
+
+/**
+ * ib_set_rmpp_resptime - Sets the response time in an RMPP header.
+ * @rmpp_hdr: An RMPP header.
+ * @rtime: The response time to set.
+ */
+static inline void ib_set_rmpp_resptime(struct ib_rmpp_hdr *rmpp_hdr, u8 rtime)
+{
+	rmpp_hdr->rmpp_rtime_flags = ib_get_rmpp_flags(rmpp_hdr) | (rtime << 3);
+}
+
+/**
+ * ib_set_rmpp_flags - Sets the flags in an RMPP header.
+ * @rmpp_hdr: An RMPP header.
+ * @flags: The flags to set.
+ */
+static inline void ib_set_rmpp_flags(struct ib_rmpp_hdr *rmpp_hdr, u8 flags)
+{
+	rmpp_hdr->rmpp_rtime_flags = (rmpp_hdr->rmpp_rtime_flags & 0xF1) |
+				     (flags & 0x7);
+}
+
+struct ib_mad_agent;
+struct ib_mad_send_wc;
+struct ib_mad_recv_wc;
+
+/**
+ * ib_mad_send_handler - callback handler for a sent MAD.
+ * @mad_agent: MAD agent that sent the MAD.
+ * @mad_send_wc: Send work completion information on the sent MAD.
+ */
+typedef void (*ib_mad_send_handler)(struct ib_mad_agent *mad_agent,
+				    struct ib_mad_send_wc *mad_send_wc);
+
+/**
+ * ib_mad_snoop_handler - Callback handler for snooping sent MADs.
+ * @mad_agent: MAD agent that snooped the MAD.
+ * @send_wr: Work request information on the sent MAD.
+ * @mad_send_wc: Work completion information on the sent MAD.  Valid
+ *   only for snooping that occurs on a send completion.
+ *
+ * Clients snooping MADs should not modify data referenced by the @send_wr
+ * or @mad_send_wc.
+ */
+typedef void (*ib_mad_snoop_handler)(struct ib_mad_agent *mad_agent,
+				     struct ib_send_wr *send_wr,
+				     struct ib_mad_send_wc *mad_send_wc);
+
+/**
+ * ib_mad_recv_handler - callback handler for a received MAD.
+ * @mad_agent: MAD agent requesting the received MAD.
+ * @mad_recv_wc: Received work completion information on the received MAD.
+ *
+ * MADs received in response to a send request operation will be handed to
+ * the user after the send operation completes.  All data buffers given
+ * to registered agents through this routine are owned by the receiving
+ * client, except for snooping agents.  Clients snooping MADs should not
+ * modify the data referenced by @mad_recv_wc.
+ */
+typedef void (*ib_mad_recv_handler)(struct ib_mad_agent *mad_agent,
+				    struct ib_mad_recv_wc *mad_recv_wc);
+
+/**
+ * ib_mad_agent - Used to track MAD registration with the access layer.
+ * @device: Reference to device registration is on.
+ * @qp: Reference to QP used for sending and receiving MADs.
+ * @mr: Memory region for system memory usable for DMA.
+ * @recv_handler: Callback handler for a received MAD.
+ * @send_handler: Callback handler for a sent MAD.
+ * @snoop_handler: Callback handler for snooped sent MADs.
+ * @context: User-specified context associated with this registration.
+ * @hi_tid: Access layer assigned transaction ID for this client.
+ *   Unsolicited MADs sent by this client will have the upper 32-bits
+ *   of their TID set to this value.
+ * @port_num: Port number on which QP is registered
+ * @rmpp_version: If set, indicates the RMPP version used by this agent.
+ */
+struct ib_mad_agent {
+	struct ib_device	*device;
+	struct ib_qp		*qp;
+	struct ib_mr		*mr;
+	ib_mad_recv_handler	recv_handler;
+	ib_mad_send_handler	send_handler;
+	ib_mad_snoop_handler	snoop_handler;
+	void			*context;
+	u32			hi_tid;
+	u8			port_num;
+	u8			rmpp_version;
+};
+
+/**
+ * ib_mad_send_wc - MAD send completion information.
+ * @wr_id: Work request identifier associated with the send MAD request.
+ * @status: Completion status.
+ * @vendor_err: Optional vendor error information returned with a failed
+ *   request.
+ */
+struct ib_mad_send_wc {
+	u64			wr_id;
+	enum ib_wc_status	status;
+	u32			vendor_err;
+};
+
+/**
+ * ib_mad_recv_buf - received MAD buffer information.
+ * @list: Reference to next data buffer for a received RMPP MAD.
+ * @grh: References a data buffer containing the global route header.
+ *   The data refereced by this buffer is only valid if the GRH is
+ *   valid.
+ * @mad: References the start of the received MAD.
+ */
+struct ib_mad_recv_buf {
+	struct list_head	list;
+	struct ib_grh		*grh;
+	struct ib_mad		*mad;
+};
+
+/**
+ * ib_mad_recv_wc - received MAD information.
+ * @wc: Completion information for the received data.
+ * @recv_buf: Specifies the location of the received data buffer(s).
+ * @rmpp_list: Specifies a list of RMPP reassembled received MAD buffers.
+ * @mad_len: The length of the received MAD, without duplicated headers.
+ *
+ * For received response, the wr_id field of the wc is set to the wr_id
+ *   for the corresponding send request.
+ */
+struct ib_mad_recv_wc {
+	struct ib_wc		*wc;
+	struct ib_mad_recv_buf	recv_buf;
+	struct list_head	rmpp_list;
+	int			mad_len;
+};
+
+/**
+ * ib_mad_reg_req - MAD registration request
+ * @mgmt_class: Indicates which management class of MADs should be receive
+ *   by the caller.  This field is only required if the user wishes to
+ *   receive unsolicited MADs, otherwise it should be 0.
+ * @mgmt_class_version: Indicates which version of MADs for the given
+ *   management class to receive.
+ * @oui: Indicates IEEE OUI when mgmt_class is a vendor class
+ *   in the range from 0x30 to 0x4f. Otherwise not used.
+ * @method_mask: The caller will receive unsolicited MADs for any method
+ *   where @method_mask = 1.
+ */
+struct ib_mad_reg_req {
+	u8	mgmt_class;
+	u8	mgmt_class_version;
+	u8	oui[3];
+	DECLARE_BITMAP(method_mask, IB_MGMT_MAX_METHODS);
+};
+
+/**
+ * ib_register_mad_agent - Register to send/receive MADs.
+ * @device: The device to register with.
+ * @port_num: The port on the specified device to use.
+ * @qp_type: Specifies which QP to access.  Must be either
+ *   IB_QPT_SMI or IB_QPT_GSI.
+ * @mad_reg_req: Specifies which unsolicited MADs should be received
+ *   by the caller.  This parameter may be NULL if the caller only
+ *   wishes to receive solicited responses.
+ * @rmpp_version: If set, indicates that the client will send
+ *   and receive MADs that contain the RMPP header for the given version.
+ *   If set to 0, indicates that RMPP is not used by this client.
+ * @send_handler: The completion callback routine invoked after a send
+ *   request has completed.
+ * @recv_handler: The completion callback routine invoked for a received
+ *   MAD.
+ * @context: User specified context associated with the registration.
+ */
+struct ib_mad_agent *ib_register_mad_agent(struct ib_device *device,
+					   u8 port_num,
+					   enum ib_qp_type qp_type,
+					   struct ib_mad_reg_req *mad_reg_req,
+					   u8 rmpp_version,
+					   ib_mad_send_handler send_handler,
+					   ib_mad_recv_handler recv_handler,
+					   void *context);
+
+enum ib_mad_snoop_flags {
+	/*IB_MAD_SNOOP_POSTED_SENDS	   = 1,*/
+	/*IB_MAD_SNOOP_RMPP_SENDS	   = (1<<1),*/
+	IB_MAD_SNOOP_SEND_COMPLETIONS	   = (1<<2),
+	/*IB_MAD_SNOOP_RMPP_SEND_COMPLETIONS = (1<<3),*/
+	IB_MAD_SNOOP_RECVS		   = (1<<4)
+	/*IB_MAD_SNOOP_RMPP_RECVS	   = (1<<5),*/
+	/*IB_MAD_SNOOP_REDIRECTED_QPS	   = (1<<6)*/
+};
+
+/**
+ * ib_register_mad_snoop - Register to snoop sent and received MADs.
+ * @device: The device to register with.
+ * @port_num: The port on the specified device to use.
+ * @qp_type: Specifies which QP traffic to snoop.  Must be either
+ *   IB_QPT_SMI or IB_QPT_GSI.
+ * @mad_snoop_flags: Specifies information where snooping occurs.
+ * @send_handler: The callback routine invoked for a snooped send.
+ * @recv_handler: The callback routine invoked for a snooped receive.
+ * @context: User specified context associated with the registration.
+ */
+struct ib_mad_agent *ib_register_mad_snoop(struct ib_device *device,
+					   u8 port_num,
+					   enum ib_qp_type qp_type,
+					   int mad_snoop_flags,
+					   ib_mad_snoop_handler snoop_handler,
+					   ib_mad_recv_handler recv_handler,
+					   void *context);
+
+/**
+ * ib_unregister_mad_agent - Unregisters a client from using MAD services.
+ * @mad_agent: Corresponding MAD registration request to deregister.
+ *
+ * After invoking this routine, MAD services are no longer usable by the
+ * client on the associated QP.
+ */
+int ib_unregister_mad_agent(struct ib_mad_agent *mad_agent);
+
+/**
+ * ib_post_send_mad - Posts MAD(s) to the send queue of the QP associated
+ *   with the registered client.
+ * @mad_agent: Specifies the associated registration to post the send to.
+ * @send_wr: Specifies the information needed to send the MAD(s).
+ * @bad_send_wr: Specifies the MAD on which an error was encountered.
+ *
+ * Sent MADs are not guaranteed to complete in the order that they were posted.
+ *
+ * If the MAD requires RMPP, the data buffer should contain a single copy
+ * of the common MAD, RMPP, and class specific headers, followed by the class
+ * defined data.  If the class defined data would not divide evenly into
+ * RMPP segments, then space must be allocated at the end of the referenced
+ * buffer for any required padding.  To indicate the amount of class defined
+ * data being transferred, the paylen_newwin field in the RMPP header should
+ * be set to the size of the class specific header plus the amount of class
+ * defined data being transferred.  The paylen_newwin field should be
+ * specified in network-byte order.
+ */
+int ib_post_send_mad(struct ib_mad_agent *mad_agent,
+		     struct ib_send_wr *send_wr,
+		     struct ib_send_wr **bad_send_wr);
+
+/**
+ * ib_coalesce_recv_mad - Coalesces received MAD data into a single buffer.
+ * @mad_recv_wc: Work completion information for a received MAD.
+ * @buf: User-provided data buffer to receive the coalesced buffers.  The
+ *   referenced buffer should be at least the size of the mad_len specified
+ *   by @mad_recv_wc.
+ *
+ * This call copies a chain of received MAD segments into a single data buffer,
+ * removing duplicated headers.
+ */
+void ib_coalesce_recv_mad(struct ib_mad_recv_wc *mad_recv_wc, void *buf);
+
+/**
+ * ib_free_recv_mad - Returns data buffers used to receive a MAD.
+ * @mad_recv_wc: Work completion information for a received MAD.
+ *
+ * Clients receiving MADs through their ib_mad_recv_handler must call this
+ * routine to return the work completion buffers to the access layer.
+ */
+void ib_free_recv_mad(struct ib_mad_recv_wc *mad_recv_wc);
+
+/**
+ * ib_cancel_mad - Cancels an outstanding send MAD operation.
+ * @mad_agent: Specifies the registration associated with sent MAD.
+ * @wr_id: Indicates the work request identifier of the MAD to cancel.
+ *
+ * MADs will be returned to the user through the corresponding
+ * ib_mad_send_handler.
+ */
+void ib_cancel_mad(struct ib_mad_agent *mad_agent, u64 wr_id);
+
+/**
+ * ib_modify_mad - Modifies an outstanding send MAD operation.
+ * @mad_agent: Specifies the registration associated with sent MAD.
+ * @wr_id: Indicates the work request identifier of the MAD to modify.
+ * @timeout_ms: New timeout value for sent MAD.
+ *
+ * This call will reset the timeout value for a sent MAD to the specified
+ * value.
+ */
+int ib_modify_mad(struct ib_mad_agent *mad_agent, u64 wr_id, u32 timeout_ms);
+
+/**
+ * ib_redirect_mad_qp - Registers a QP for MAD services.
+ * @qp: Reference to a QP that requires MAD services.
+ * @rmpp_version: If set, indicates that the client will send
+ *   and receive MADs that contain the RMPP header for the given version.
+ *   If set to 0, indicates that RMPP is not used by this client.
+ * @send_handler: The completion callback routine invoked after a send
+ *   request has completed.
+ * @recv_handler: The completion callback routine invoked for a received
+ *   MAD.
+ * @context: User specified context associated with the registration.
+ *
+ * Use of this call allows clients to use MAD services, such as RMPP,
+ * on user-owned QPs.  After calling this routine, users may send
+ * MADs on the specified QP by calling ib_mad_post_send.
+ */
+struct ib_mad_agent *ib_redirect_mad_qp(struct ib_qp *qp,
+					u8 rmpp_version,
+					ib_mad_send_handler send_handler,
+					ib_mad_recv_handler recv_handler,
+					void *context);
+
+/**
+ * ib_process_mad_wc - Processes a work completion associated with a
+ *   MAD sent or received on a redirected QP.
+ * @mad_agent: Specifies the registered MAD service using the redirected QP.
+ * @wc: References a work completion associated with a sent or received
+ *   MAD segment.
+ *
+ * This routine is used to complete or continue processing on a MAD request.
+ * If the work completion is associated with a send operation, calling
+ * this routine is required to continue an RMPP transfer or to wait for a
+ * corresponding response, if it is a request.  If the work completion is
+ * associated with a receive operation, calling this routine is required to
+ * process an inbound or outbound RMPP transfer, or to match a response MAD
+ * with its corresponding request.
+ */
+int ib_process_mad_wc(struct ib_mad_agent *mad_agent,
+		      struct ib_wc *wc);
+
+/**
+ * ib_create_send_mad - Allocate and initialize a data buffer and work request
+ *   for sending a MAD.
+ * @mad_agent: Specifies the registered MAD service to associate with the MAD.
+ * @remote_qpn: Specifies the QPN of the receiving node.
+ * @pkey_index: Specifies which PKey the MAD will be sent using.  This field
+ *   is valid only if the remote_qpn is QP 1.
+ * @ah: References the address handle used to transfer to the remote node.
+ * @rmpp_active: Indicates if the send will enable RMPP.
+ * @hdr_len: Indicates the size of the data header of the MAD.  This length
+ *   should include the common MAD header, RMPP header, plus any class
+ *   specific header.
+ * @data_len: Indicates the size of any user-transferred data.  The call will
+ *   automatically adjust the allocated buffer size to account for any
+ *   additional padding that may be necessary.
+ * @gfp_mask: GFP mask used for the memory allocation.
+ *
+ * This is a helper routine that may be used to allocate a MAD.  Users are
+ * not required to allocate outbound MADs using this call.  The returned
+ * MAD send buffer will reference a data buffer usable for sending a MAD, along
+ * with an initialized work request structure.  Users may modify the returned
+ * MAD data buffer or work request before posting the send.
+ *
+ * The returned data buffer will be cleared.  Users are responsible for
+ * initializing the common MAD and any class specific headers.  If @rmpp_active
+ * is set, the RMPP header will be initialized for sending.
+ */
+struct ib_mad_send_buf * ib_create_send_mad(struct ib_mad_agent *mad_agent,
+					    u32 remote_qpn, u16 pkey_index,
+					    struct ib_ah *ah, int rmpp_active,
+					    int hdr_len, int data_len,
+					    unsigned int __nocast gfp_mask);
+
+/**
+ * ib_free_send_mad - Returns data buffers used to send a MAD.
+ * @send_buf: Previously allocated send data buffer.
+ */
+void ib_free_send_mad(struct ib_mad_send_buf *send_buf);
+
+#endif /* IB_MAD_H */
diff --git a/include/rdma/ib_pack.h b/include/rdma/ib_pack.h
new file mode 100644
index 000000000000..f926020d6331
--- /dev/null
+++ b/include/rdma/ib_pack.h
@@ -0,0 +1,245 @@
+/*
+ * Copyright (c) 2004 Topspin Corporation.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * $Id: ib_pack.h 1349 2004-12-16 21:09:43Z roland $
+ */
+
+#ifndef IB_PACK_H
+#define IB_PACK_H
+
+#include <rdma/ib_verbs.h>
+
+enum {
+	IB_LRH_BYTES  = 8,
+	IB_GRH_BYTES  = 40,
+	IB_BTH_BYTES  = 12,
+	IB_DETH_BYTES = 8
+};
+
+struct ib_field {
+	size_t struct_offset_bytes;
+	size_t struct_size_bytes;
+	int    offset_words;
+	int    offset_bits;
+	int    size_bits;
+	char  *field_name;
+};
+
+#define RESERVED \
+	.field_name          = "reserved"
+
+/*
+ * This macro cleans up the definitions of constants for BTH opcodes.
+ * It is used to define constants such as IB_OPCODE_UD_SEND_ONLY,
+ * which becomes IB_OPCODE_UD + IB_OPCODE_SEND_ONLY, and this gives
+ * the correct value.
+ *
+ * In short, user code should use the constants defined using the
+ * macro rather than worrying about adding together other constants.
+*/
+#define IB_OPCODE(transport, op) \
+	IB_OPCODE_ ## transport ## _ ## op = \
+		IB_OPCODE_ ## transport + IB_OPCODE_ ## op
+
+enum {
+	/* transport types -- just used to define real constants */
+	IB_OPCODE_RC                                = 0x00,
+	IB_OPCODE_UC                                = 0x20,
+	IB_OPCODE_RD                                = 0x40,
+	IB_OPCODE_UD                                = 0x60,
+
+	/* operations -- just used to define real constants */
+	IB_OPCODE_SEND_FIRST                        = 0x00,
+	IB_OPCODE_SEND_MIDDLE                       = 0x01,
+	IB_OPCODE_SEND_LAST                         = 0x02,
+	IB_OPCODE_SEND_LAST_WITH_IMMEDIATE          = 0x03,
+	IB_OPCODE_SEND_ONLY                         = 0x04,
+	IB_OPCODE_SEND_ONLY_WITH_IMMEDIATE          = 0x05,
+	IB_OPCODE_RDMA_WRITE_FIRST                  = 0x06,
+	IB_OPCODE_RDMA_WRITE_MIDDLE                 = 0x07,
+	IB_OPCODE_RDMA_WRITE_LAST                   = 0x08,
+	IB_OPCODE_RDMA_WRITE_LAST_WITH_IMMEDIATE    = 0x09,
+	IB_OPCODE_RDMA_WRITE_ONLY                   = 0x0a,
+	IB_OPCODE_RDMA_WRITE_ONLY_WITH_IMMEDIATE    = 0x0b,
+	IB_OPCODE_RDMA_READ_REQUEST                 = 0x0c,
+	IB_OPCODE_RDMA_READ_RESPONSE_FIRST          = 0x0d,
+	IB_OPCODE_RDMA_READ_RESPONSE_MIDDLE         = 0x0e,
+	IB_OPCODE_RDMA_READ_RESPONSE_LAST           = 0x0f,
+	IB_OPCODE_RDMA_READ_RESPONSE_ONLY           = 0x10,
+	IB_OPCODE_ACKNOWLEDGE                       = 0x11,
+	IB_OPCODE_ATOMIC_ACKNOWLEDGE                = 0x12,
+	IB_OPCODE_COMPARE_SWAP                      = 0x13,
+	IB_OPCODE_FETCH_ADD                         = 0x14,
+
+	/* real constants follow -- see comment about above IB_OPCODE()
+	   macro for more details */
+
+	/* RC */
+	IB_OPCODE(RC, SEND_FIRST),
+	IB_OPCODE(RC, SEND_MIDDLE),
+	IB_OPCODE(RC, SEND_LAST),
+	IB_OPCODE(RC, SEND_LAST_WITH_IMMEDIATE),
+	IB_OPCODE(RC, SEND_ONLY),
+	IB_OPCODE(RC, SEND_ONLY_WITH_IMMEDIATE),
+	IB_OPCODE(RC, RDMA_WRITE_FIRST),
+	IB_OPCODE(RC, RDMA_WRITE_MIDDLE),
+	IB_OPCODE(RC, RDMA_WRITE_LAST),
+	IB_OPCODE(RC, RDMA_WRITE_LAST_WITH_IMMEDIATE),
+	IB_OPCODE(RC, RDMA_WRITE_ONLY),
+	IB_OPCODE(RC, RDMA_WRITE_ONLY_WITH_IMMEDIATE),
+	IB_OPCODE(RC, RDMA_READ_REQUEST),
+	IB_OPCODE(RC, RDMA_READ_RESPONSE_FIRST),
+	IB_OPCODE(RC, RDMA_READ_RESPONSE_MIDDLE),
+	IB_OPCODE(RC, RDMA_READ_RESPONSE_LAST),
+	IB_OPCODE(RC, RDMA_READ_RESPONSE_ONLY),
+	IB_OPCODE(RC, ACKNOWLEDGE),
+	IB_OPCODE(RC, ATOMIC_ACKNOWLEDGE),
+	IB_OPCODE(RC, COMPARE_SWAP),
+	IB_OPCODE(RC, FETCH_ADD),
+
+	/* UC */
+	IB_OPCODE(UC, SEND_FIRST),
+	IB_OPCODE(UC, SEND_MIDDLE),
+	IB_OPCODE(UC, SEND_LAST),
+	IB_OPCODE(UC, SEND_LAST_WITH_IMMEDIATE),
+	IB_OPCODE(UC, SEND_ONLY),
+	IB_OPCODE(UC, SEND_ONLY_WITH_IMMEDIATE),
+	IB_OPCODE(UC, RDMA_WRITE_FIRST),
+	IB_OPCODE(UC, RDMA_WRITE_MIDDLE),
+	IB_OPCODE(UC, RDMA_WRITE_LAST),
+	IB_OPCODE(UC, RDMA_WRITE_LAST_WITH_IMMEDIATE),
+	IB_OPCODE(UC, RDMA_WRITE_ONLY),
+	IB_OPCODE(UC, RDMA_WRITE_ONLY_WITH_IMMEDIATE),
+
+	/* RD */
+	IB_OPCODE(RD, SEND_FIRST),
+	IB_OPCODE(RD, SEND_MIDDLE),
+	IB_OPCODE(RD, SEND_LAST),
+	IB_OPCODE(RD, SEND_LAST_WITH_IMMEDIATE),
+	IB_OPCODE(RD, SEND_ONLY),
+	IB_OPCODE(RD, SEND_ONLY_WITH_IMMEDIATE),
+	IB_OPCODE(RD, RDMA_WRITE_FIRST),
+	IB_OPCODE(RD, RDMA_WRITE_MIDDLE),
+	IB_OPCODE(RD, RDMA_WRITE_LAST),
+	IB_OPCODE(RD, RDMA_WRITE_LAST_WITH_IMMEDIATE),
+	IB_OPCODE(RD, RDMA_WRITE_ONLY),
+	IB_OPCODE(RD, RDMA_WRITE_ONLY_WITH_IMMEDIATE),
+	IB_OPCODE(RD, RDMA_READ_REQUEST),
+	IB_OPCODE(RD, RDMA_READ_RESPONSE_FIRST),
+	IB_OPCODE(RD, RDMA_READ_RESPONSE_MIDDLE),
+	IB_OPCODE(RD, RDMA_READ_RESPONSE_LAST),
+	IB_OPCODE(RD, RDMA_READ_RESPONSE_ONLY),
+	IB_OPCODE(RD, ACKNOWLEDGE),
+	IB_OPCODE(RD, ATOMIC_ACKNOWLEDGE),
+	IB_OPCODE(RD, COMPARE_SWAP),
+	IB_OPCODE(RD, FETCH_ADD),
+
+	/* UD */
+	IB_OPCODE(UD, SEND_ONLY),
+	IB_OPCODE(UD, SEND_ONLY_WITH_IMMEDIATE)
+};
+
+enum {
+	IB_LNH_RAW        = 0,
+	IB_LNH_IP         = 1,
+	IB_LNH_IBA_LOCAL  = 2,
+	IB_LNH_IBA_GLOBAL = 3
+};
+
+struct ib_unpacked_lrh {
+	u8        virtual_lane;
+	u8        link_version;
+	u8        service_level;
+	u8        link_next_header;
+	__be16    destination_lid;
+	__be16    packet_length;
+	__be16    source_lid;
+};
+
+struct ib_unpacked_grh {
+	u8    	     ip_version;
+	u8    	     traffic_class;
+	__be32 	     flow_label;
+	__be16       payload_length;
+	u8    	     next_header;
+	u8    	     hop_limit;
+	union ib_gid source_gid;
+	union ib_gid destination_gid;
+};
+
+struct ib_unpacked_bth {
+	u8           opcode;
+	u8           solicited_event;
+	u8           mig_req;
+	u8           pad_count;
+	u8           transport_header_version;
+	__be16       pkey;
+	__be32       destination_qpn;
+	u8           ack_req;
+	__be32       psn;
+};
+
+struct ib_unpacked_deth {
+	__be32       qkey;
+	__be32       source_qpn;
+};
+
+struct ib_ud_header {
+	struct ib_unpacked_lrh  lrh;
+	int                     grh_present;
+	struct ib_unpacked_grh  grh;
+	struct ib_unpacked_bth  bth;
+	struct ib_unpacked_deth deth;
+	int            		immediate_present;
+	__be32         		immediate_data;
+};
+
+void ib_pack(const struct ib_field        *desc,
+	     int                           desc_len,
+	     void                         *structure,
+	     void                         *buf);
+
+void ib_unpack(const struct ib_field        *desc,
+	       int                           desc_len,
+	       void                         *buf,
+	       void                         *structure);
+
+void ib_ud_header_init(int     		   payload_bytes,
+		       int    		   grh_present,
+		       struct ib_ud_header *header);
+
+int ib_ud_header_pack(struct ib_ud_header *header,
+		      void                *buf);
+
+int ib_ud_header_unpack(void                *buf,
+			struct ib_ud_header *header);
+
+#endif /* IB_PACK_H */
diff --git a/include/rdma/ib_sa.h b/include/rdma/ib_sa.h
new file mode 100644
index 000000000000..c022edfc49da
--- /dev/null
+++ b/include/rdma/ib_sa.h
@@ -0,0 +1,373 @@
+/*
+ * Copyright (c) 2004 Topspin Communications.  All rights reserved.
+ * Copyright (c) 2005 Voltaire, Inc.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * $Id: ib_sa.h 2811 2005-07-06 18:11:43Z halr $
+ */
+
+#ifndef IB_SA_H
+#define IB_SA_H
+
+#include <linux/compiler.h>
+
+#include <rdma/ib_verbs.h>
+#include <rdma/ib_mad.h>
+
+enum {
+	IB_SA_CLASS_VERSION		= 2,	/* IB spec version 1.1/1.2 */
+
+	IB_SA_METHOD_GET_TABLE		= 0x12,
+	IB_SA_METHOD_GET_TABLE_RESP	= 0x92,
+	IB_SA_METHOD_DELETE		= 0x15
+};
+
+enum ib_sa_selector {
+	IB_SA_GTE  = 0,
+	IB_SA_LTE  = 1,
+	IB_SA_EQ   = 2,
+	/*
+	 * The meaning of "best" depends on the attribute: for
+	 * example, for MTU best will return the largest available
+	 * MTU, while for packet life time, best will return the
+	 * smallest available life time.
+	 */
+	IB_SA_BEST = 3
+};
+
+enum ib_sa_rate {
+	IB_SA_RATE_2_5_GBPS = 2,
+	IB_SA_RATE_5_GBPS   = 5,
+	IB_SA_RATE_10_GBPS  = 3,
+	IB_SA_RATE_20_GBPS  = 6,
+	IB_SA_RATE_30_GBPS  = 4,
+	IB_SA_RATE_40_GBPS  = 7,
+	IB_SA_RATE_60_GBPS  = 8,
+	IB_SA_RATE_80_GBPS  = 9,
+	IB_SA_RATE_120_GBPS = 10
+};
+
+static inline int ib_sa_rate_enum_to_int(enum ib_sa_rate rate)
+{
+	switch (rate) {
+	case IB_SA_RATE_2_5_GBPS: return  1;
+	case IB_SA_RATE_5_GBPS:   return  2;
+	case IB_SA_RATE_10_GBPS:  return  4;
+	case IB_SA_RATE_20_GBPS:  return  8;
+	case IB_SA_RATE_30_GBPS:  return 12;
+	case IB_SA_RATE_40_GBPS:  return 16;
+	case IB_SA_RATE_60_GBPS:  return 24;
+	case IB_SA_RATE_80_GBPS:  return 32;
+	case IB_SA_RATE_120_GBPS: return 48;
+	default: 	          return -1;
+	}
+}
+
+/*
+ * Structures for SA records are named "struct ib_sa_xxx_rec."  No
+ * attempt is made to pack structures to match the physical layout of
+ * SA records in SA MADs; all packing and unpacking is handled by the
+ * SA query code.
+ *
+ * For a record with structure ib_sa_xxx_rec, the naming convention
+ * for the component mask value for field yyy is IB_SA_XXX_REC_YYY (we
+ * never use different abbreviations or otherwise change the spelling
+ * of xxx/yyy between ib_sa_xxx_rec.yyy and IB_SA_XXX_REC_YYY).
+ *
+ * Reserved rows are indicated with comments to help maintainability.
+ */
+
+/* reserved:								 0 */
+/* reserved:								 1 */
+#define IB_SA_PATH_REC_DGID				IB_SA_COMP_MASK( 2)
+#define IB_SA_PATH_REC_SGID				IB_SA_COMP_MASK( 3)
+#define IB_SA_PATH_REC_DLID				IB_SA_COMP_MASK( 4)
+#define IB_SA_PATH_REC_SLID				IB_SA_COMP_MASK( 5)
+#define IB_SA_PATH_REC_RAW_TRAFFIC			IB_SA_COMP_MASK( 6)
+/* reserved:								 7 */
+#define IB_SA_PATH_REC_FLOW_LABEL       		IB_SA_COMP_MASK( 8)
+#define IB_SA_PATH_REC_HOP_LIMIT			IB_SA_COMP_MASK( 9)
+#define IB_SA_PATH_REC_TRAFFIC_CLASS			IB_SA_COMP_MASK(10)
+#define IB_SA_PATH_REC_REVERSIBLE			IB_SA_COMP_MASK(11)
+#define IB_SA_PATH_REC_NUMB_PATH			IB_SA_COMP_MASK(12)
+#define IB_SA_PATH_REC_PKEY				IB_SA_COMP_MASK(13)
+/* reserved:								14 */
+#define IB_SA_PATH_REC_SL				IB_SA_COMP_MASK(15)
+#define IB_SA_PATH_REC_MTU_SELECTOR			IB_SA_COMP_MASK(16)
+#define IB_SA_PATH_REC_MTU				IB_SA_COMP_MASK(17)
+#define IB_SA_PATH_REC_RATE_SELECTOR			IB_SA_COMP_MASK(18)
+#define IB_SA_PATH_REC_RATE				IB_SA_COMP_MASK(19)
+#define IB_SA_PATH_REC_PACKET_LIFE_TIME_SELECTOR	IB_SA_COMP_MASK(20)
+#define IB_SA_PATH_REC_PACKET_LIFE_TIME			IB_SA_COMP_MASK(21)
+#define IB_SA_PATH_REC_PREFERENCE			IB_SA_COMP_MASK(22)
+
+struct ib_sa_path_rec {
+	/* reserved */
+	/* reserved */
+	union ib_gid dgid;
+	union ib_gid sgid;
+	__be16       dlid;
+	__be16       slid;
+	int          raw_traffic;
+	/* reserved */
+	__be32       flow_label;
+	u8           hop_limit;
+	u8           traffic_class;
+	int          reversible;
+	u8           numb_path;
+	__be16       pkey;
+	/* reserved */
+	u8           sl;
+	u8           mtu_selector;
+	u8           mtu;
+	u8           rate_selector;
+	u8           rate;
+	u8           packet_life_time_selector;
+	u8           packet_life_time;
+	u8           preference;
+};
+
+#define IB_SA_MCMEMBER_REC_MGID				IB_SA_COMP_MASK( 0)
+#define IB_SA_MCMEMBER_REC_PORT_GID			IB_SA_COMP_MASK( 1)
+#define IB_SA_MCMEMBER_REC_QKEY				IB_SA_COMP_MASK( 2)
+#define IB_SA_MCMEMBER_REC_MLID				IB_SA_COMP_MASK( 3)
+#define IB_SA_MCMEMBER_REC_MTU_SELECTOR			IB_SA_COMP_MASK( 4)
+#define IB_SA_MCMEMBER_REC_MTU				IB_SA_COMP_MASK( 5)
+#define IB_SA_MCMEMBER_REC_TRAFFIC_CLASS		IB_SA_COMP_MASK( 6)
+#define IB_SA_MCMEMBER_REC_PKEY				IB_SA_COMP_MASK( 7)
+#define IB_SA_MCMEMBER_REC_RATE_SELECTOR		IB_SA_COMP_MASK( 8)
+#define IB_SA_MCMEMBER_REC_RATE				IB_SA_COMP_MASK( 9)
+#define IB_SA_MCMEMBER_REC_PACKET_LIFE_TIME_SELECTOR	IB_SA_COMP_MASK(10)
+#define IB_SA_MCMEMBER_REC_PACKET_LIFE_TIME		IB_SA_COMP_MASK(11)
+#define IB_SA_MCMEMBER_REC_SL				IB_SA_COMP_MASK(12)
+#define IB_SA_MCMEMBER_REC_FLOW_LABEL			IB_SA_COMP_MASK(13)
+#define IB_SA_MCMEMBER_REC_HOP_LIMIT			IB_SA_COMP_MASK(14)
+#define IB_SA_MCMEMBER_REC_SCOPE			IB_SA_COMP_MASK(15)
+#define IB_SA_MCMEMBER_REC_JOIN_STATE			IB_SA_COMP_MASK(16)
+#define IB_SA_MCMEMBER_REC_PROXY_JOIN			IB_SA_COMP_MASK(17)
+
+struct ib_sa_mcmember_rec {
+	union ib_gid mgid;
+	union ib_gid port_gid;
+	__be32       qkey;
+	__be16       mlid;
+	u8           mtu_selector;
+	u8           mtu;
+	u8           traffic_class;
+	__be16       pkey;
+	u8 	     rate_selector;
+	u8 	     rate;
+	u8 	     packet_life_time_selector;
+	u8 	     packet_life_time;
+	u8           sl;
+	__be32       flow_label;
+	u8           hop_limit;
+	u8           scope;
+	u8           join_state;
+	int          proxy_join;
+};
+
+/* Service Record Component Mask Sec 15.2.5.14 Ver 1.1	*/
+#define IB_SA_SERVICE_REC_SERVICE_ID			IB_SA_COMP_MASK( 0)
+#define IB_SA_SERVICE_REC_SERVICE_GID			IB_SA_COMP_MASK( 1)
+#define IB_SA_SERVICE_REC_SERVICE_PKEY			IB_SA_COMP_MASK( 2)
+/* reserved:								 3 */
+#define IB_SA_SERVICE_REC_SERVICE_LEASE			IB_SA_COMP_MASK( 4)
+#define IB_SA_SERVICE_REC_SERVICE_KEY			IB_SA_COMP_MASK( 5)
+#define IB_SA_SERVICE_REC_SERVICE_NAME			IB_SA_COMP_MASK( 6)
+#define IB_SA_SERVICE_REC_SERVICE_DATA8_0		IB_SA_COMP_MASK( 7)
+#define IB_SA_SERVICE_REC_SERVICE_DATA8_1		IB_SA_COMP_MASK( 8)
+#define IB_SA_SERVICE_REC_SERVICE_DATA8_2		IB_SA_COMP_MASK( 9)
+#define IB_SA_SERVICE_REC_SERVICE_DATA8_3		IB_SA_COMP_MASK(10)
+#define IB_SA_SERVICE_REC_SERVICE_DATA8_4		IB_SA_COMP_MASK(11)
+#define IB_SA_SERVICE_REC_SERVICE_DATA8_5		IB_SA_COMP_MASK(12)
+#define IB_SA_SERVICE_REC_SERVICE_DATA8_6		IB_SA_COMP_MASK(13)
+#define IB_SA_SERVICE_REC_SERVICE_DATA8_7		IB_SA_COMP_MASK(14)
+#define IB_SA_SERVICE_REC_SERVICE_DATA8_8		IB_SA_COMP_MASK(15)
+#define IB_SA_SERVICE_REC_SERVICE_DATA8_9		IB_SA_COMP_MASK(16)
+#define IB_SA_SERVICE_REC_SERVICE_DATA8_10		IB_SA_COMP_MASK(17)
+#define IB_SA_SERVICE_REC_SERVICE_DATA8_11		IB_SA_COMP_MASK(18)
+#define IB_SA_SERVICE_REC_SERVICE_DATA8_12		IB_SA_COMP_MASK(19)
+#define IB_SA_SERVICE_REC_SERVICE_DATA8_13		IB_SA_COMP_MASK(20)
+#define IB_SA_SERVICE_REC_SERVICE_DATA8_14		IB_SA_COMP_MASK(21)
+#define IB_SA_SERVICE_REC_SERVICE_DATA8_15		IB_SA_COMP_MASK(22)
+#define IB_SA_SERVICE_REC_SERVICE_DATA16_0		IB_SA_COMP_MASK(23)
+#define IB_SA_SERVICE_REC_SERVICE_DATA16_1		IB_SA_COMP_MASK(24)
+#define IB_SA_SERVICE_REC_SERVICE_DATA16_2		IB_SA_COMP_MASK(25)
+#define IB_SA_SERVICE_REC_SERVICE_DATA16_3		IB_SA_COMP_MASK(26)
+#define IB_SA_SERVICE_REC_SERVICE_DATA16_4		IB_SA_COMP_MASK(27)
+#define IB_SA_SERVICE_REC_SERVICE_DATA16_5		IB_SA_COMP_MASK(28)
+#define IB_SA_SERVICE_REC_SERVICE_DATA16_6		IB_SA_COMP_MASK(29)
+#define IB_SA_SERVICE_REC_SERVICE_DATA16_7		IB_SA_COMP_MASK(30)
+#define IB_SA_SERVICE_REC_SERVICE_DATA32_0		IB_SA_COMP_MASK(31)
+#define IB_SA_SERVICE_REC_SERVICE_DATA32_1		IB_SA_COMP_MASK(32)
+#define IB_SA_SERVICE_REC_SERVICE_DATA32_2		IB_SA_COMP_MASK(33)
+#define IB_SA_SERVICE_REC_SERVICE_DATA32_3		IB_SA_COMP_MASK(34)
+#define IB_SA_SERVICE_REC_SERVICE_DATA64_0		IB_SA_COMP_MASK(35)
+#define IB_SA_SERVICE_REC_SERVICE_DATA64_1		IB_SA_COMP_MASK(36)
+
+#define IB_DEFAULT_SERVICE_LEASE 	0xFFFFFFFF
+
+struct ib_sa_service_rec {
+	u64		id;
+	union ib_gid	gid;
+	__be16 		pkey;
+	/* reserved */
+	u32		lease;
+	u8		key[16];
+	u8		name[64];
+	u8		data8[16];
+	u16		data16[8];
+	u32		data32[4];
+	u64		data64[2];
+};
+
+struct ib_sa_query;
+
+void ib_sa_cancel_query(int id, struct ib_sa_query *query);
+
+int ib_sa_path_rec_get(struct ib_device *device, u8 port_num,
+		       struct ib_sa_path_rec *rec,
+		       ib_sa_comp_mask comp_mask,
+		       int timeout_ms, unsigned int __nocast gfp_mask,
+		       void (*callback)(int status,
+					struct ib_sa_path_rec *resp,
+					void *context),
+		       void *context,
+		       struct ib_sa_query **query);
+
+int ib_sa_mcmember_rec_query(struct ib_device *device, u8 port_num,
+			     u8 method,
+			     struct ib_sa_mcmember_rec *rec,
+			     ib_sa_comp_mask comp_mask,
+			     int timeout_ms, unsigned int __nocast gfp_mask,
+			     void (*callback)(int status,
+					      struct ib_sa_mcmember_rec *resp,
+					      void *context),
+			     void *context,
+			     struct ib_sa_query **query);
+
+int ib_sa_service_rec_query(struct ib_device *device, u8 port_num,
+			 u8 method,
+			 struct ib_sa_service_rec *rec,
+			 ib_sa_comp_mask comp_mask,
+			 int timeout_ms, unsigned int __nocast gfp_mask,
+			 void (*callback)(int status,
+					  struct ib_sa_service_rec *resp,
+					  void *context),
+			 void *context,
+			 struct ib_sa_query **sa_query);
+
+/**
+ * ib_sa_mcmember_rec_set - Start an MCMember set query
+ * @device:device to send query on
+ * @port_num: port number to send query on
+ * @rec:MCMember Record to send in query
+ * @comp_mask:component mask to send in query
+ * @timeout_ms:time to wait for response
+ * @gfp_mask:GFP mask to use for internal allocations
+ * @callback:function called when query completes, times out or is
+ * canceled
+ * @context:opaque user context passed to callback
+ * @sa_query:query context, used to cancel query
+ *
+ * Send an MCMember Set query to the SA (eg to join a multicast
+ * group).  The callback function will be called when the query
+ * completes (or fails); status is 0 for a successful response, -EINTR
+ * if the query is canceled, -ETIMEDOUT is the query timed out, or
+ * -EIO if an error occurred sending the query.  The resp parameter of
+ * the callback is only valid if status is 0.
+ *
+ * If the return value of ib_sa_mcmember_rec_set() is negative, it is
+ * an error code.  Otherwise it is a query ID that can be used to
+ * cancel the query.
+ */
+static inline int
+ib_sa_mcmember_rec_set(struct ib_device *device, u8 port_num,
+		       struct ib_sa_mcmember_rec *rec,
+		       ib_sa_comp_mask comp_mask,
+		       int timeout_ms, unsigned int __nocast gfp_mask,
+		       void (*callback)(int status,
+					struct ib_sa_mcmember_rec *resp,
+					void *context),
+		       void *context,
+		       struct ib_sa_query **query)
+{
+	return ib_sa_mcmember_rec_query(device, port_num,
+					IB_MGMT_METHOD_SET,
+					rec, comp_mask,
+					timeout_ms, gfp_mask, callback,
+					context, query);
+}
+
+/**
+ * ib_sa_mcmember_rec_delete - Start an MCMember delete query
+ * @device:device to send query on
+ * @port_num: port number to send query on
+ * @rec:MCMember Record to send in query
+ * @comp_mask:component mask to send in query
+ * @timeout_ms:time to wait for response
+ * @gfp_mask:GFP mask to use for internal allocations
+ * @callback:function called when query completes, times out or is
+ * canceled
+ * @context:opaque user context passed to callback
+ * @sa_query:query context, used to cancel query
+ *
+ * Send an MCMember Delete query to the SA (eg to leave a multicast
+ * group).  The callback function will be called when the query
+ * completes (or fails); status is 0 for a successful response, -EINTR
+ * if the query is canceled, -ETIMEDOUT is the query timed out, or
+ * -EIO if an error occurred sending the query.  The resp parameter of
+ * the callback is only valid if status is 0.
+ *
+ * If the return value of ib_sa_mcmember_rec_delete() is negative, it
+ * is an error code.  Otherwise it is a query ID that can be used to
+ * cancel the query.
+ */
+static inline int
+ib_sa_mcmember_rec_delete(struct ib_device *device, u8 port_num,
+			  struct ib_sa_mcmember_rec *rec,
+			  ib_sa_comp_mask comp_mask,
+			  int timeout_ms, unsigned int __nocast gfp_mask,
+			  void (*callback)(int status,
+					   struct ib_sa_mcmember_rec *resp,
+					   void *context),
+			  void *context,
+			  struct ib_sa_query **query)
+{
+	return ib_sa_mcmember_rec_query(device, port_num,
+					IB_SA_METHOD_DELETE,
+					rec, comp_mask,
+					timeout_ms, gfp_mask, callback,
+					context, query);
+}
+
+
+#endif /* IB_SA_H */
diff --git a/include/rdma/ib_smi.h b/include/rdma/ib_smi.h
new file mode 100644
index 000000000000..87f60737f695
--- /dev/null
+++ b/include/rdma/ib_smi.h
@@ -0,0 +1,94 @@
+/*
+ * Copyright (c) 2004 Mellanox Technologies Ltd.  All rights reserved.
+ * Copyright (c) 2004 Infinicon Corporation.  All rights reserved.
+ * Copyright (c) 2004 Intel Corporation.  All rights reserved.
+ * Copyright (c) 2004 Topspin Corporation.  All rights reserved.
+ * Copyright (c) 2004 Voltaire Corporation.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * $Id: ib_smi.h 1389 2004-12-27 22:56:47Z roland $
+ */
+
+#if !defined( IB_SMI_H )
+#define IB_SMI_H
+
+#include <rdma/ib_mad.h>
+
+#define IB_SMP_DATA_SIZE			64
+#define IB_SMP_MAX_PATH_HOPS			64
+
+struct ib_smp {
+	u8	base_version;
+	u8	mgmt_class;
+	u8	class_version;
+	u8	method;
+	__be16	status;
+	u8	hop_ptr;
+	u8	hop_cnt;
+	__be64	tid;
+	__be16	attr_id;
+	__be16	resv;
+	__be32	attr_mod;
+	__be64	mkey;
+	__be16	dr_slid;
+	__be16	dr_dlid;
+	u8	reserved[28];
+	u8	data[IB_SMP_DATA_SIZE];
+	u8	initial_path[IB_SMP_MAX_PATH_HOPS];
+	u8	return_path[IB_SMP_MAX_PATH_HOPS];
+} __attribute__ ((packed));
+
+#define IB_SMP_DIRECTION			__constant_htons(0x8000)
+
+/* Subnet management attributes */
+#define IB_SMP_ATTR_NOTICE			__constant_htons(0x0002)
+#define IB_SMP_ATTR_NODE_DESC			__constant_htons(0x0010)
+#define IB_SMP_ATTR_NODE_INFO			__constant_htons(0x0011)
+#define IB_SMP_ATTR_SWITCH_INFO			__constant_htons(0x0012)
+#define IB_SMP_ATTR_GUID_INFO			__constant_htons(0x0014)
+#define IB_SMP_ATTR_PORT_INFO			__constant_htons(0x0015)
+#define IB_SMP_ATTR_PKEY_TABLE			__constant_htons(0x0016)
+#define IB_SMP_ATTR_SL_TO_VL_TABLE		__constant_htons(0x0017)
+#define IB_SMP_ATTR_VL_ARB_TABLE		__constant_htons(0x0018)
+#define IB_SMP_ATTR_LINEAR_FORWARD_TABLE	__constant_htons(0x0019)
+#define IB_SMP_ATTR_RANDOM_FORWARD_TABLE	__constant_htons(0x001A)
+#define IB_SMP_ATTR_MCAST_FORWARD_TABLE		__constant_htons(0x001B)
+#define IB_SMP_ATTR_SM_INFO			__constant_htons(0x0020)
+#define IB_SMP_ATTR_VENDOR_DIAG			__constant_htons(0x0030)
+#define IB_SMP_ATTR_LED_INFO			__constant_htons(0x0031)
+#define IB_SMP_ATTR_VENDOR_MASK			__constant_htons(0xFF00)
+
+static inline u8
+ib_get_smp_direction(struct ib_smp *smp)
+{
+	return ((smp->status & IB_SMP_DIRECTION) == IB_SMP_DIRECTION);
+}
+
+#endif /* IB_SMI_H */
diff --git a/include/rdma/ib_user_cm.h b/include/rdma/ib_user_cm.h
new file mode 100644
index 000000000000..72182d16778b
--- /dev/null
+++ b/include/rdma/ib_user_cm.h
@@ -0,0 +1,328 @@
+/*
+ * Copyright (c) 2005 Topspin Communications.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * $Id: ib_user_cm.h 2576 2005-06-09 17:00:30Z libor $
+ */
+
+#ifndef IB_USER_CM_H
+#define IB_USER_CM_H
+
+#include <linux/types.h>
+
+#define IB_USER_CM_ABI_VERSION 1
+
+enum {
+	IB_USER_CM_CMD_CREATE_ID,
+	IB_USER_CM_CMD_DESTROY_ID,
+	IB_USER_CM_CMD_ATTR_ID,
+
+	IB_USER_CM_CMD_LISTEN,
+	IB_USER_CM_CMD_ESTABLISH,
+
+	IB_USER_CM_CMD_SEND_REQ,
+	IB_USER_CM_CMD_SEND_REP,
+	IB_USER_CM_CMD_SEND_RTU,
+	IB_USER_CM_CMD_SEND_DREQ,
+	IB_USER_CM_CMD_SEND_DREP,
+	IB_USER_CM_CMD_SEND_REJ,
+	IB_USER_CM_CMD_SEND_MRA,
+	IB_USER_CM_CMD_SEND_LAP,
+	IB_USER_CM_CMD_SEND_APR,
+	IB_USER_CM_CMD_SEND_SIDR_REQ,
+	IB_USER_CM_CMD_SEND_SIDR_REP,
+
+	IB_USER_CM_CMD_EVENT,
+};
+/*
+ * command ABI structures.
+ */
+struct ib_ucm_cmd_hdr {
+	__u32 cmd;
+	__u16 in;
+	__u16 out;
+};
+
+struct ib_ucm_create_id {
+	__u64 response;
+};
+
+struct ib_ucm_create_id_resp {
+	__u32 id;
+};
+
+struct ib_ucm_destroy_id {
+	__u32 id;
+};
+
+struct ib_ucm_attr_id {
+	__u64 response;
+	__u32 id;
+};
+
+struct ib_ucm_attr_id_resp {
+	__be64 service_id;
+	__be64 service_mask;
+	__be32 local_id;
+	__be32 remote_id;
+};
+
+struct ib_ucm_listen {
+	__be64 service_id;
+	__be64 service_mask;
+	__u32 id;
+};
+
+struct ib_ucm_establish {
+	__u32 id;
+};
+
+struct ib_ucm_private_data {
+	__u64 data;
+	__u32 id;
+	__u8  len;
+	__u8  reserved[3];
+};
+
+struct ib_ucm_path_rec {
+	__u8  dgid[16];
+	__u8  sgid[16];
+	__be16 dlid;
+	__be16 slid;
+	__u32 raw_traffic;
+	__be32 flow_label;
+	__u32 reversible;
+	__u32 mtu;
+	__be16 pkey;
+	__u8  hop_limit;
+	__u8  traffic_class;
+	__u8  numb_path;
+	__u8  sl;
+	__u8  mtu_selector;
+	__u8  rate_selector;
+	__u8  rate;
+	__u8  packet_life_time_selector;
+	__u8  packet_life_time;
+	__u8  preference;
+};
+
+struct ib_ucm_req {
+	__u32 id;
+	__u32 qpn;
+	__u32 qp_type;
+	__u32 psn;
+	__be64 sid;
+	__u64 data;
+	__u64 primary_path;
+	__u64 alternate_path;
+	__u8  len;
+	__u8  peer_to_peer;
+	__u8  responder_resources;
+	__u8  initiator_depth;
+	__u8  remote_cm_response_timeout;
+	__u8  flow_control;
+	__u8  local_cm_response_timeout;
+	__u8  retry_count;
+	__u8  rnr_retry_count;
+	__u8  max_cm_retries;
+	__u8  srq;
+	__u8  reserved[1];
+};
+
+struct ib_ucm_rep {
+	__u64 data;
+	__u32 id;
+	__u32 qpn;
+	__u32 psn;
+	__u8  len;
+	__u8  responder_resources;
+	__u8  initiator_depth;
+	__u8  target_ack_delay;
+	__u8  failover_accepted;
+	__u8  flow_control;
+	__u8  rnr_retry_count;
+	__u8  srq;
+};
+
+struct ib_ucm_info {
+	__u32 id;
+	__u32 status;
+	__u64 info;
+	__u64 data;
+	__u8  info_len;
+	__u8  data_len;
+	__u8  reserved[2];
+};
+
+struct ib_ucm_mra {
+	__u64 data;
+	__u32 id;
+	__u8  len;
+	__u8  timeout;
+	__u8  reserved[2];
+};
+
+struct ib_ucm_lap {
+	__u64 path;
+	__u64 data;
+	__u32 id;
+	__u8  len;
+	__u8  reserved[3];
+};
+
+struct ib_ucm_sidr_req {
+	__u32 id;
+	__u32 timeout;
+	__be64 sid;
+	__u64 data;
+	__u64 path;
+	__u16 pkey;
+	__u8  len;
+	__u8  max_cm_retries;
+};
+
+struct ib_ucm_sidr_rep {
+	__u32 id;
+	__u32 qpn;
+	__u32 qkey;
+	__u32 status;
+	__u64 info;
+	__u64 data;
+	__u8  info_len;
+	__u8  data_len;
+	__u8  reserved[2];
+};
+/*
+ * event notification ABI structures.
+ */
+struct ib_ucm_event_get {
+	__u64 response;
+	__u64 data;
+	__u64 info;
+	__u8  data_len;
+	__u8  info_len;
+	__u8  reserved[2];
+};
+
+struct ib_ucm_req_event_resp {
+	__u32                  listen_id;
+	/* device */
+	/* port */
+	struct ib_ucm_path_rec primary_path;
+	struct ib_ucm_path_rec alternate_path;
+	__be64                 remote_ca_guid;
+	__u32                  remote_qkey;
+	__u32                  remote_qpn;
+	__u32                  qp_type;
+	__u32                  starting_psn;
+	__u8  responder_resources;
+	__u8  initiator_depth;
+	__u8  local_cm_response_timeout;
+	__u8  flow_control;
+	__u8  remote_cm_response_timeout;
+	__u8  retry_count;
+	__u8  rnr_retry_count;
+	__u8  srq;
+};
+
+struct ib_ucm_rep_event_resp {
+	__be64 remote_ca_guid;
+	__u32 remote_qkey;
+	__u32 remote_qpn;
+	__u32 starting_psn;
+	__u8  responder_resources;
+	__u8  initiator_depth;
+	__u8  target_ack_delay;
+	__u8  failover_accepted;
+	__u8  flow_control;
+	__u8  rnr_retry_count;
+	__u8  srq;
+	__u8  reserved[1];
+};
+
+struct ib_ucm_rej_event_resp {
+	__u32 reason;
+	/* ari in ib_ucm_event_get info field. */
+};
+
+struct ib_ucm_mra_event_resp {
+	__u8  timeout;
+	__u8  reserved[3];
+};
+
+struct ib_ucm_lap_event_resp {
+	struct ib_ucm_path_rec path;
+};
+
+struct ib_ucm_apr_event_resp {
+	__u32 status;
+	/* apr info in ib_ucm_event_get info field. */
+};
+
+struct ib_ucm_sidr_req_event_resp {
+	__u32 listen_id;
+	/* device */
+	/* port */
+	__u16 pkey;
+	__u8  reserved[2];
+};
+
+struct ib_ucm_sidr_rep_event_resp {
+	__u32 status;
+	__u32 qkey;
+	__u32 qpn;
+	/* info in ib_ucm_event_get info field. */
+};
+
+#define IB_UCM_PRES_DATA      0x01
+#define IB_UCM_PRES_INFO      0x02
+#define IB_UCM_PRES_PRIMARY   0x04
+#define IB_UCM_PRES_ALTERNATE 0x08
+
+struct ib_ucm_event_resp {
+	__u32 id;
+	__u32 event;
+	__u32 present;
+	union {
+		struct ib_ucm_req_event_resp req_resp;
+		struct ib_ucm_rep_event_resp rep_resp;
+		struct ib_ucm_rej_event_resp rej_resp;
+		struct ib_ucm_mra_event_resp mra_resp;
+		struct ib_ucm_lap_event_resp lap_resp;
+		struct ib_ucm_apr_event_resp apr_resp;
+
+		struct ib_ucm_sidr_req_event_resp sidr_req_resp;
+		struct ib_ucm_sidr_rep_event_resp sidr_rep_resp;
+
+		__u32                             send_status;
+	} u;
+};
+
+#endif /* IB_USER_CM_H */
diff --git a/include/rdma/ib_user_mad.h b/include/rdma/ib_user_mad.h
new file mode 100644
index 000000000000..44537aa32e62
--- /dev/null
+++ b/include/rdma/ib_user_mad.h
@@ -0,0 +1,137 @@
+/*
+ * Copyright (c) 2004 Topspin Communications.  All rights reserved.
+ * Copyright (c) 2005 Voltaire, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * $Id: ib_user_mad.h 2814 2005-07-06 19:14:09Z halr $
+ */
+
+#ifndef IB_USER_MAD_H
+#define IB_USER_MAD_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+/*
+ * Increment this value if any changes that break userspace ABI
+ * compatibility are made.
+ */
+#define IB_USER_MAD_ABI_VERSION	5
+
+/*
+ * Make sure that all structs defined in this file remain laid out so
+ * that they pack the same way on 32-bit and 64-bit architectures (to
+ * avoid incompatibility between 32-bit userspace and 64-bit kernels).
+ */
+
+/**
+ * ib_user_mad_hdr - MAD packet header
+ * @id - ID of agent MAD received with/to be sent with
+ * @status - 0 on successful receive, ETIMEDOUT if no response
+ *   received (transaction ID in data[] will be set to TID of original
+ *   request) (ignored on send)
+ * @timeout_ms - Milliseconds to wait for response (unset on receive)
+ * @retries - Number of automatic retries to attempt
+ * @qpn - Remote QP number received from/to be sent to
+ * @qkey - Remote Q_Key to be sent with (unset on receive)
+ * @lid - Remote lid received from/to be sent to
+ * @sl - Service level received with/to be sent with
+ * @path_bits - Local path bits received with/to be sent with
+ * @grh_present - If set, GRH was received/should be sent
+ * @gid_index - Local GID index to send with (unset on receive)
+ * @hop_limit - Hop limit in GRH
+ * @traffic_class - Traffic class in GRH
+ * @gid - Remote GID in GRH
+ * @flow_label - Flow label in GRH
+ */
+struct ib_user_mad_hdr {
+	__u32	id;
+	__u32	status;
+	__u32	timeout_ms;
+	__u32	retries;
+	__u32	length;
+	__be32	qpn;
+	__be32  qkey;
+	__be16	lid;
+	__u8	sl;
+	__u8	path_bits;
+	__u8	grh_present;
+	__u8	gid_index;
+	__u8	hop_limit;
+	__u8	traffic_class;
+	__u8	gid[16];
+	__be32	flow_label;
+};
+
+/**
+ * ib_user_mad - MAD packet
+ * @hdr - MAD packet header
+ * @data - Contents of MAD
+ *
+ */
+struct ib_user_mad {
+	struct ib_user_mad_hdr hdr;
+	__u8	data[0];
+};
+
+/**
+ * ib_user_mad_reg_req - MAD registration request
+ * @id - Set by the kernel; used to identify agent in future requests.
+ * @qpn - Queue pair number; must be 0 or 1.
+ * @method_mask - The caller will receive unsolicited MADs for any method
+ *   where @method_mask = 1.
+ * @mgmt_class - Indicates which management class of MADs should be receive
+ *   by the caller.  This field is only required if the user wishes to
+ *   receive unsolicited MADs, otherwise it should be 0.
+ * @mgmt_class_version - Indicates which version of MADs for the given
+ *   management class to receive.
+ * @oui: Indicates IEEE OUI when mgmt_class is a vendor class
+ *   in the range from 0x30 to 0x4f. Otherwise not used.
+ * @rmpp_version: If set, indicates the RMPP version used.
+ *
+ */
+struct ib_user_mad_reg_req {
+	__u32	id;
+	__u32	method_mask[4];
+	__u8	qpn;
+	__u8	mgmt_class;
+	__u8	mgmt_class_version;
+	__u8    oui[3];
+	__u8	rmpp_version;
+};
+
+#define IB_IOCTL_MAGIC		0x1b
+
+#define IB_USER_MAD_REGISTER_AGENT	_IOWR(IB_IOCTL_MAGIC, 1, \
+					      struct ib_user_mad_reg_req)
+
+#define IB_USER_MAD_UNREGISTER_AGENT	_IOW(IB_IOCTL_MAGIC, 2, __u32)
+
+#endif /* IB_USER_MAD_H */
diff --git a/include/rdma/ib_user_verbs.h b/include/rdma/ib_user_verbs.h
new file mode 100644
index 000000000000..7ebb01c8f996
--- /dev/null
+++ b/include/rdma/ib_user_verbs.h
@@ -0,0 +1,422 @@
+/*
+ * Copyright (c) 2005 Topspin Communications.  All rights reserved.
+ * Copyright (c) 2005 Cisco Systems.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * $Id: ib_user_verbs.h 2708 2005-06-24 17:27:21Z roland $
+ */
+
+#ifndef IB_USER_VERBS_H
+#define IB_USER_VERBS_H
+
+#include <linux/types.h>
+
+/*
+ * Increment this value if any changes that break userspace ABI
+ * compatibility are made.
+ */
+#define IB_USER_VERBS_ABI_VERSION	1
+
+enum {
+	IB_USER_VERBS_CMD_QUERY_PARAMS,
+	IB_USER_VERBS_CMD_GET_CONTEXT,
+	IB_USER_VERBS_CMD_QUERY_DEVICE,
+	IB_USER_VERBS_CMD_QUERY_PORT,
+	IB_USER_VERBS_CMD_QUERY_GID,
+	IB_USER_VERBS_CMD_QUERY_PKEY,
+	IB_USER_VERBS_CMD_ALLOC_PD,
+	IB_USER_VERBS_CMD_DEALLOC_PD,
+	IB_USER_VERBS_CMD_CREATE_AH,
+	IB_USER_VERBS_CMD_MODIFY_AH,
+	IB_USER_VERBS_CMD_QUERY_AH,
+	IB_USER_VERBS_CMD_DESTROY_AH,
+	IB_USER_VERBS_CMD_REG_MR,
+	IB_USER_VERBS_CMD_REG_SMR,
+	IB_USER_VERBS_CMD_REREG_MR,
+	IB_USER_VERBS_CMD_QUERY_MR,
+	IB_USER_VERBS_CMD_DEREG_MR,
+	IB_USER_VERBS_CMD_ALLOC_MW,
+	IB_USER_VERBS_CMD_BIND_MW,
+	IB_USER_VERBS_CMD_DEALLOC_MW,
+	IB_USER_VERBS_CMD_CREATE_CQ,
+	IB_USER_VERBS_CMD_RESIZE_CQ,
+	IB_USER_VERBS_CMD_DESTROY_CQ,
+	IB_USER_VERBS_CMD_POLL_CQ,
+	IB_USER_VERBS_CMD_PEEK_CQ,
+	IB_USER_VERBS_CMD_REQ_NOTIFY_CQ,
+	IB_USER_VERBS_CMD_CREATE_QP,
+	IB_USER_VERBS_CMD_QUERY_QP,
+	IB_USER_VERBS_CMD_MODIFY_QP,
+	IB_USER_VERBS_CMD_DESTROY_QP,
+	IB_USER_VERBS_CMD_POST_SEND,
+	IB_USER_VERBS_CMD_POST_RECV,
+	IB_USER_VERBS_CMD_ATTACH_MCAST,
+	IB_USER_VERBS_CMD_DETACH_MCAST,
+	IB_USER_VERBS_CMD_CREATE_SRQ,
+	IB_USER_VERBS_CMD_MODIFY_SRQ,
+	IB_USER_VERBS_CMD_QUERY_SRQ,
+	IB_USER_VERBS_CMD_DESTROY_SRQ,
+	IB_USER_VERBS_CMD_POST_SRQ_RECV
+};
+
+/*
+ * Make sure that all structs defined in this file remain laid out so
+ * that they pack the same way on 32-bit and 64-bit architectures (to
+ * avoid incompatibility between 32-bit userspace and 64-bit kernels).
+ * In particular do not use pointer types -- pass pointers in __u64
+ * instead.
+ */
+
+struct ib_uverbs_async_event_desc {
+	__u64 element;
+	__u32 event_type;	/* enum ib_event_type */
+	__u32 reserved;
+};
+
+struct ib_uverbs_comp_event_desc {
+	__u64 cq_handle;
+};
+
+/*
+ * All commands from userspace should start with a __u32 command field
+ * followed by __u16 in_words and out_words fields (which give the
+ * length of the command block and response buffer if any in 32-bit
+ * words).  The kernel driver will read these fields first and read
+ * the rest of the command struct based on these value.
+ */
+
+struct ib_uverbs_cmd_hdr {
+	__u32 command;
+	__u16 in_words;
+	__u16 out_words;
+};
+
+/*
+ * No driver_data for "query params" command, since this is intended
+ * to be a core function with no possible device dependence.
+ */
+struct ib_uverbs_query_params {
+	__u64 response;
+};
+
+struct ib_uverbs_query_params_resp {
+	__u32 num_cq_events;
+};
+
+struct ib_uverbs_get_context {
+	__u64 response;
+	__u64 cq_fd_tab;
+	__u64 driver_data[0];
+};
+
+struct ib_uverbs_get_context_resp {
+	__u32 async_fd;
+	__u32 reserved;
+};
+
+struct ib_uverbs_query_device {
+	__u64 response;
+	__u64 driver_data[0];
+};
+
+struct ib_uverbs_query_device_resp {
+	__u64 fw_ver;
+	__be64 node_guid;
+	__be64 sys_image_guid;
+	__u64 max_mr_size;
+	__u64 page_size_cap;
+	__u32 vendor_id;
+	__u32 vendor_part_id;
+	__u32 hw_ver;
+	__u32 max_qp;
+	__u32 max_qp_wr;
+	__u32 device_cap_flags;
+	__u32 max_sge;
+	__u32 max_sge_rd;
+	__u32 max_cq;
+	__u32 max_cqe;
+	__u32 max_mr;
+	__u32 max_pd;
+	__u32 max_qp_rd_atom;
+	__u32 max_ee_rd_atom;
+	__u32 max_res_rd_atom;
+	__u32 max_qp_init_rd_atom;
+	__u32 max_ee_init_rd_atom;
+	__u32 atomic_cap;
+	__u32 max_ee;
+	__u32 max_rdd;
+	__u32 max_mw;
+	__u32 max_raw_ipv6_qp;
+	__u32 max_raw_ethy_qp;
+	__u32 max_mcast_grp;
+	__u32 max_mcast_qp_attach;
+	__u32 max_total_mcast_qp_attach;
+	__u32 max_ah;
+	__u32 max_fmr;
+	__u32 max_map_per_fmr;
+	__u32 max_srq;
+	__u32 max_srq_wr;
+	__u32 max_srq_sge;
+	__u16 max_pkeys;
+	__u8  local_ca_ack_delay;
+	__u8  phys_port_cnt;
+	__u8  reserved[4];
+};
+
+struct ib_uverbs_query_port {
+	__u64 response;
+	__u8  port_num;
+	__u8  reserved[7];
+	__u64 driver_data[0];
+};
+
+struct ib_uverbs_query_port_resp {
+	__u32 port_cap_flags;
+	__u32 max_msg_sz;
+	__u32 bad_pkey_cntr;
+	__u32 qkey_viol_cntr;
+	__u32 gid_tbl_len;
+	__u16 pkey_tbl_len;
+	__u16 lid;
+	__u16 sm_lid;
+	__u8  state;
+	__u8  max_mtu;
+	__u8  active_mtu;
+	__u8  lmc;
+	__u8  max_vl_num;
+	__u8  sm_sl;
+	__u8  subnet_timeout;
+	__u8  init_type_reply;
+	__u8  active_width;
+	__u8  active_speed;
+	__u8  phys_state;
+	__u8  reserved[3];
+};
+
+struct ib_uverbs_query_gid {
+	__u64 response;
+	__u8  port_num;
+	__u8  index;
+	__u8  reserved[6];
+	__u64 driver_data[0];
+};
+
+struct ib_uverbs_query_gid_resp {
+	__u8  gid[16];
+};
+
+struct ib_uverbs_query_pkey {
+	__u64 response;
+	__u8  port_num;
+	__u8  index;
+	__u8  reserved[6];
+	__u64 driver_data[0];
+};
+
+struct ib_uverbs_query_pkey_resp {
+	__u16 pkey;
+	__u16 reserved;
+};
+
+struct ib_uverbs_alloc_pd {
+	__u64 response;
+	__u64 driver_data[0];
+};
+
+struct ib_uverbs_alloc_pd_resp {
+	__u32 pd_handle;
+};
+
+struct ib_uverbs_dealloc_pd {
+	__u32 pd_handle;
+};
+
+struct ib_uverbs_reg_mr {
+	__u64 response;
+	__u64 start;
+	__u64 length;
+	__u64 hca_va;
+	__u32 pd_handle;
+	__u32 access_flags;
+	__u64 driver_data[0];
+};
+
+struct ib_uverbs_reg_mr_resp {
+	__u32 mr_handle;
+	__u32 lkey;
+	__u32 rkey;
+};
+
+struct ib_uverbs_dereg_mr {
+	__u32 mr_handle;
+};
+
+struct ib_uverbs_create_cq {
+	__u64 response;
+	__u64 user_handle;
+	__u32 cqe;
+	__u32 event_handler;
+	__u64 driver_data[0];
+};
+
+struct ib_uverbs_create_cq_resp {
+	__u32 cq_handle;
+	__u32 cqe;
+};
+
+struct ib_uverbs_destroy_cq {
+	__u32 cq_handle;
+};
+
+struct ib_uverbs_create_qp {
+	__u64 response;
+	__u64 user_handle;
+	__u32 pd_handle;
+	__u32 send_cq_handle;
+	__u32 recv_cq_handle;
+	__u32 srq_handle;
+	__u32 max_send_wr;
+	__u32 max_recv_wr;
+	__u32 max_send_sge;
+	__u32 max_recv_sge;
+	__u32 max_inline_data;
+	__u8  sq_sig_all;
+	__u8  qp_type;
+	__u8  is_srq;
+	__u8  reserved;
+	__u64 driver_data[0];
+};
+
+struct ib_uverbs_create_qp_resp {
+	__u32 qp_handle;
+	__u32 qpn;
+};
+
+/*
+ * This struct needs to remain a multiple of 8 bytes to keep the
+ * alignment of the modify QP parameters.
+ */
+struct ib_uverbs_qp_dest {
+	__u8  dgid[16];
+	__u32 flow_label;
+	__u16 dlid;
+	__u16 reserved;
+	__u8  sgid_index;
+	__u8  hop_limit;
+	__u8  traffic_class;
+	__u8  sl;
+	__u8  src_path_bits;
+	__u8  static_rate;
+	__u8  is_global;
+	__u8  port_num;
+};
+
+struct ib_uverbs_modify_qp {
+	struct ib_uverbs_qp_dest dest;
+	struct ib_uverbs_qp_dest alt_dest;
+	__u32 qp_handle;
+	__u32 attr_mask;
+	__u32 qkey;
+	__u32 rq_psn;
+	__u32 sq_psn;
+	__u32 dest_qp_num;
+	__u32 qp_access_flags;
+	__u16 pkey_index;
+	__u16 alt_pkey_index;
+	__u8  qp_state;
+	__u8  cur_qp_state;
+	__u8  path_mtu;
+	__u8  path_mig_state;
+	__u8  en_sqd_async_notify;
+	__u8  max_rd_atomic;
+	__u8  max_dest_rd_atomic;
+	__u8  min_rnr_timer;
+	__u8  port_num;
+	__u8  timeout;
+	__u8  retry_cnt;
+	__u8  rnr_retry;
+	__u8  alt_port_num;
+	__u8  alt_timeout;
+	__u8  reserved[2];
+	__u64 driver_data[0];
+};
+
+struct ib_uverbs_modify_qp_resp {
+};
+
+struct ib_uverbs_destroy_qp {
+	__u32 qp_handle;
+};
+
+struct ib_uverbs_attach_mcast {
+	__u8  gid[16];
+	__u32 qp_handle;
+	__u16 mlid;
+	__u16 reserved;
+	__u64 driver_data[0];
+};
+
+struct ib_uverbs_detach_mcast {
+	__u8  gid[16];
+	__u32 qp_handle;
+	__u16 mlid;
+	__u16 reserved;
+	__u64 driver_data[0];
+};
+
+struct ib_uverbs_create_srq {
+	__u64 response;
+	__u64 user_handle;
+	__u32 pd_handle;
+	__u32 max_wr;
+	__u32 max_sge;
+	__u32 srq_limit;
+	__u64 driver_data[0];
+};
+
+struct ib_uverbs_create_srq_resp {
+	__u32 srq_handle;
+};
+
+struct ib_uverbs_modify_srq {
+	__u32 srq_handle;
+	__u32 attr_mask;
+	__u32 max_wr;
+	__u32 max_sge;
+	__u32 srq_limit;
+	__u32 reserved;
+	__u64 driver_data[0];
+};
+
+struct ib_uverbs_destroy_srq {
+	__u32 srq_handle;
+};
+
+#endif /* IB_USER_VERBS_H */
diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
new file mode 100644
index 000000000000..e16cf94870f2
--- /dev/null
+++ b/include/rdma/ib_verbs.h
@@ -0,0 +1,1461 @@
+/*
+ * Copyright (c) 2004 Mellanox Technologies Ltd.  All rights reserved.
+ * Copyright (c) 2004 Infinicon Corporation.  All rights reserved.
+ * Copyright (c) 2004 Intel Corporation.  All rights reserved.
+ * Copyright (c) 2004 Topspin Corporation.  All rights reserved.
+ * Copyright (c) 2004 Voltaire Corporation.  All rights reserved.
+ * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved.
+ * Copyright (c) 2005 Cisco Systems.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * $Id: ib_verbs.h 1349 2004-12-16 21:09:43Z roland $
+ */
+
+#if !defined(IB_VERBS_H)
+#define IB_VERBS_H
+
+#include <linux/types.h>
+#include <linux/device.h>
+
+#include <asm/atomic.h>
+#include <asm/scatterlist.h>
+#include <asm/uaccess.h>
+
+union ib_gid {
+	u8	raw[16];
+	struct {
+		__be64	subnet_prefix;
+		__be64	interface_id;
+	} global;
+};
+
+enum ib_node_type {
+	IB_NODE_CA 	= 1,
+	IB_NODE_SWITCH,
+	IB_NODE_ROUTER
+};
+
+enum ib_device_cap_flags {
+	IB_DEVICE_RESIZE_MAX_WR		= 1,
+	IB_DEVICE_BAD_PKEY_CNTR		= (1<<1),
+	IB_DEVICE_BAD_QKEY_CNTR		= (1<<2),
+	IB_DEVICE_RAW_MULTI		= (1<<3),
+	IB_DEVICE_AUTO_PATH_MIG		= (1<<4),
+	IB_DEVICE_CHANGE_PHY_PORT	= (1<<5),
+	IB_DEVICE_UD_AV_PORT_ENFORCE	= (1<<6),
+	IB_DEVICE_CURR_QP_STATE_MOD	= (1<<7),
+	IB_DEVICE_SHUTDOWN_PORT		= (1<<8),
+	IB_DEVICE_INIT_TYPE		= (1<<9),
+	IB_DEVICE_PORT_ACTIVE_EVENT	= (1<<10),
+	IB_DEVICE_SYS_IMAGE_GUID	= (1<<11),
+	IB_DEVICE_RC_RNR_NAK_GEN	= (1<<12),
+	IB_DEVICE_SRQ_RESIZE		= (1<<13),
+	IB_DEVICE_N_NOTIFY_CQ		= (1<<14),
+};
+
+enum ib_atomic_cap {
+	IB_ATOMIC_NONE,
+	IB_ATOMIC_HCA,
+	IB_ATOMIC_GLOB
+};
+
+struct ib_device_attr {
+	u64			fw_ver;
+	__be64			node_guid;
+	__be64			sys_image_guid;
+	u64			max_mr_size;
+	u64			page_size_cap;
+	u32			vendor_id;
+	u32			vendor_part_id;
+	u32			hw_ver;
+	int			max_qp;
+	int			max_qp_wr;
+	int			device_cap_flags;
+	int			max_sge;
+	int			max_sge_rd;
+	int			max_cq;
+	int			max_cqe;
+	int			max_mr;
+	int			max_pd;
+	int			max_qp_rd_atom;
+	int			max_ee_rd_atom;
+	int			max_res_rd_atom;
+	int			max_qp_init_rd_atom;
+	int			max_ee_init_rd_atom;
+	enum ib_atomic_cap	atomic_cap;
+	int			max_ee;
+	int			max_rdd;
+	int			max_mw;
+	int			max_raw_ipv6_qp;
+	int			max_raw_ethy_qp;
+	int			max_mcast_grp;
+	int			max_mcast_qp_attach;
+	int			max_total_mcast_qp_attach;
+	int			max_ah;
+	int			max_fmr;
+	int			max_map_per_fmr;
+	int			max_srq;
+	int			max_srq_wr;
+	int			max_srq_sge;
+	u16			max_pkeys;
+	u8			local_ca_ack_delay;
+};
+
+enum ib_mtu {
+	IB_MTU_256  = 1,
+	IB_MTU_512  = 2,
+	IB_MTU_1024 = 3,
+	IB_MTU_2048 = 4,
+	IB_MTU_4096 = 5
+};
+
+static inline int ib_mtu_enum_to_int(enum ib_mtu mtu)
+{
+	switch (mtu) {
+	case IB_MTU_256:  return  256;
+	case IB_MTU_512:  return  512;
+	case IB_MTU_1024: return 1024;
+	case IB_MTU_2048: return 2048;
+	case IB_MTU_4096: return 4096;
+	default: 	  return -1;
+	}
+}
+
+enum ib_port_state {
+	IB_PORT_NOP		= 0,
+	IB_PORT_DOWN		= 1,
+	IB_PORT_INIT		= 2,
+	IB_PORT_ARMED		= 3,
+	IB_PORT_ACTIVE		= 4,
+	IB_PORT_ACTIVE_DEFER	= 5
+};
+
+enum ib_port_cap_flags {
+	IB_PORT_SM				= 1 <<  1,
+	IB_PORT_NOTICE_SUP			= 1 <<  2,
+	IB_PORT_TRAP_SUP			= 1 <<  3,
+	IB_PORT_OPT_IPD_SUP                     = 1 <<  4,
+	IB_PORT_AUTO_MIGR_SUP			= 1 <<  5,
+	IB_PORT_SL_MAP_SUP			= 1 <<  6,
+	IB_PORT_MKEY_NVRAM			= 1 <<  7,
+	IB_PORT_PKEY_NVRAM			= 1 <<  8,
+	IB_PORT_LED_INFO_SUP			= 1 <<  9,
+	IB_PORT_SM_DISABLED			= 1 << 10,
+	IB_PORT_SYS_IMAGE_GUID_SUP		= 1 << 11,
+	IB_PORT_PKEY_SW_EXT_PORT_TRAP_SUP	= 1 << 12,
+	IB_PORT_CM_SUP				= 1 << 16,
+	IB_PORT_SNMP_TUNNEL_SUP			= 1 << 17,
+	IB_PORT_REINIT_SUP			= 1 << 18,
+	IB_PORT_DEVICE_MGMT_SUP			= 1 << 19,
+	IB_PORT_VENDOR_CLASS_SUP		= 1 << 20,
+	IB_PORT_DR_NOTICE_SUP			= 1 << 21,
+	IB_PORT_CAP_MASK_NOTICE_SUP		= 1 << 22,
+	IB_PORT_BOOT_MGMT_SUP			= 1 << 23,
+	IB_PORT_LINK_LATENCY_SUP		= 1 << 24,
+	IB_PORT_CLIENT_REG_SUP			= 1 << 25
+};
+
+enum ib_port_width {
+	IB_WIDTH_1X	= 1,
+	IB_WIDTH_4X	= 2,
+	IB_WIDTH_8X	= 4,
+	IB_WIDTH_12X	= 8
+};
+
+static inline int ib_width_enum_to_int(enum ib_port_width width)
+{
+	switch (width) {
+	case IB_WIDTH_1X:  return  1;
+	case IB_WIDTH_4X:  return  4;
+	case IB_WIDTH_8X:  return  8;
+	case IB_WIDTH_12X: return 12;
+	default: 	  return -1;
+	}
+}
+
+struct ib_port_attr {
+	enum ib_port_state	state;
+	enum ib_mtu		max_mtu;
+	enum ib_mtu		active_mtu;
+	int			gid_tbl_len;
+	u32			port_cap_flags;
+	u32			max_msg_sz;
+	u32			bad_pkey_cntr;
+	u32			qkey_viol_cntr;
+	u16			pkey_tbl_len;
+	u16			lid;
+	u16			sm_lid;
+	u8			lmc;
+	u8			max_vl_num;
+	u8			sm_sl;
+	u8			subnet_timeout;
+	u8			init_type_reply;
+	u8			active_width;
+	u8			active_speed;
+	u8                      phys_state;
+};
+
+enum ib_device_modify_flags {
+	IB_DEVICE_MODIFY_SYS_IMAGE_GUID	= 1
+};
+
+struct ib_device_modify {
+	u64	sys_image_guid;
+};
+
+enum ib_port_modify_flags {
+	IB_PORT_SHUTDOWN		= 1,
+	IB_PORT_INIT_TYPE		= (1<<2),
+	IB_PORT_RESET_QKEY_CNTR		= (1<<3)
+};
+
+struct ib_port_modify {
+	u32	set_port_cap_mask;
+	u32	clr_port_cap_mask;
+	u8	init_type;
+};
+
+enum ib_event_type {
+	IB_EVENT_CQ_ERR,
+	IB_EVENT_QP_FATAL,
+	IB_EVENT_QP_REQ_ERR,
+	IB_EVENT_QP_ACCESS_ERR,
+	IB_EVENT_COMM_EST,
+	IB_EVENT_SQ_DRAINED,
+	IB_EVENT_PATH_MIG,
+	IB_EVENT_PATH_MIG_ERR,
+	IB_EVENT_DEVICE_FATAL,
+	IB_EVENT_PORT_ACTIVE,
+	IB_EVENT_PORT_ERR,
+	IB_EVENT_LID_CHANGE,
+	IB_EVENT_PKEY_CHANGE,
+	IB_EVENT_SM_CHANGE,
+	IB_EVENT_SRQ_ERR,
+	IB_EVENT_SRQ_LIMIT_REACHED,
+	IB_EVENT_QP_LAST_WQE_REACHED
+};
+
+struct ib_event {
+	struct ib_device	*device;
+	union {
+		struct ib_cq	*cq;
+		struct ib_qp	*qp;
+		struct ib_srq	*srq;
+		u8		port_num;
+	} element;
+	enum ib_event_type	event;
+};
+
+struct ib_event_handler {
+	struct ib_device *device;
+	void            (*handler)(struct ib_event_handler *, struct ib_event *);
+	struct list_head  list;
+};
+
+#define INIT_IB_EVENT_HANDLER(_ptr, _device, _handler)		\
+	do {							\
+		(_ptr)->device  = _device;			\
+		(_ptr)->handler = _handler;			\
+		INIT_LIST_HEAD(&(_ptr)->list);			\
+	} while (0)
+
+struct ib_global_route {
+	union ib_gid	dgid;
+	u32		flow_label;
+	u8		sgid_index;
+	u8		hop_limit;
+	u8		traffic_class;
+};
+
+struct ib_grh {
+	__be32		version_tclass_flow;
+	__be16		paylen;
+	u8		next_hdr;
+	u8		hop_limit;
+	union ib_gid	sgid;
+	union ib_gid	dgid;
+};
+
+enum {
+	IB_MULTICAST_QPN = 0xffffff
+};
+
+#define IB_LID_PERMISSIVE	__constant_htons(0xFFFF)
+
+enum ib_ah_flags {
+	IB_AH_GRH	= 1
+};
+
+struct ib_ah_attr {
+	struct ib_global_route	grh;
+	u16			dlid;
+	u8			sl;
+	u8			src_path_bits;
+	u8			static_rate;
+	u8			ah_flags;
+	u8			port_num;
+};
+
+enum ib_wc_status {
+	IB_WC_SUCCESS,
+	IB_WC_LOC_LEN_ERR,
+	IB_WC_LOC_QP_OP_ERR,
+	IB_WC_LOC_EEC_OP_ERR,
+	IB_WC_LOC_PROT_ERR,
+	IB_WC_WR_FLUSH_ERR,
+	IB_WC_MW_BIND_ERR,
+	IB_WC_BAD_RESP_ERR,
+	IB_WC_LOC_ACCESS_ERR,
+	IB_WC_REM_INV_REQ_ERR,
+	IB_WC_REM_ACCESS_ERR,
+	IB_WC_REM_OP_ERR,
+	IB_WC_RETRY_EXC_ERR,
+	IB_WC_RNR_RETRY_EXC_ERR,
+	IB_WC_LOC_RDD_VIOL_ERR,
+	IB_WC_REM_INV_RD_REQ_ERR,
+	IB_WC_REM_ABORT_ERR,
+	IB_WC_INV_EECN_ERR,
+	IB_WC_INV_EEC_STATE_ERR,
+	IB_WC_FATAL_ERR,
+	IB_WC_RESP_TIMEOUT_ERR,
+	IB_WC_GENERAL_ERR
+};
+
+enum ib_wc_opcode {
+	IB_WC_SEND,
+	IB_WC_RDMA_WRITE,
+	IB_WC_RDMA_READ,
+	IB_WC_COMP_SWAP,
+	IB_WC_FETCH_ADD,
+	IB_WC_BIND_MW,
+/*
+ * Set value of IB_WC_RECV so consumers can test if a completion is a
+ * receive by testing (opcode & IB_WC_RECV).
+ */
+	IB_WC_RECV			= 1 << 7,
+	IB_WC_RECV_RDMA_WITH_IMM
+};
+
+enum ib_wc_flags {
+	IB_WC_GRH		= 1,
+	IB_WC_WITH_IMM		= (1<<1)
+};
+
+struct ib_wc {
+	u64			wr_id;
+	enum ib_wc_status	status;
+	enum ib_wc_opcode	opcode;
+	u32			vendor_err;
+	u32			byte_len;
+	__be32			imm_data;
+	u32			qp_num;
+	u32			src_qp;
+	int			wc_flags;
+	u16			pkey_index;
+	u16			slid;
+	u8			sl;
+	u8			dlid_path_bits;
+	u8			port_num;	/* valid only for DR SMPs on switches */
+};
+
+enum ib_cq_notify {
+	IB_CQ_SOLICITED,
+	IB_CQ_NEXT_COMP
+};
+
+enum ib_srq_attr_mask {
+	IB_SRQ_MAX_WR	= 1 << 0,
+	IB_SRQ_LIMIT	= 1 << 1,
+};
+
+struct ib_srq_attr {
+	u32	max_wr;
+	u32	max_sge;
+	u32	srq_limit;
+};
+
+struct ib_srq_init_attr {
+	void		      (*event_handler)(struct ib_event *, void *);
+	void		       *srq_context;
+	struct ib_srq_attr	attr;
+};
+
+struct ib_qp_cap {
+	u32	max_send_wr;
+	u32	max_recv_wr;
+	u32	max_send_sge;
+	u32	max_recv_sge;
+	u32	max_inline_data;
+};
+
+enum ib_sig_type {
+	IB_SIGNAL_ALL_WR,
+	IB_SIGNAL_REQ_WR
+};
+
+enum ib_qp_type {
+	/*
+	 * IB_QPT_SMI and IB_QPT_GSI have to be the first two entries
+	 * here (and in that order) since the MAD layer uses them as
+	 * indices into a 2-entry table.
+	 */
+	IB_QPT_SMI,
+	IB_QPT_GSI,
+
+	IB_QPT_RC,
+	IB_QPT_UC,
+	IB_QPT_UD,
+	IB_QPT_RAW_IPV6,
+	IB_QPT_RAW_ETY
+};
+
+struct ib_qp_init_attr {
+	void                  (*event_handler)(struct ib_event *, void *);
+	void		       *qp_context;
+	struct ib_cq	       *send_cq;
+	struct ib_cq	       *recv_cq;
+	struct ib_srq	       *srq;
+	struct ib_qp_cap	cap;
+	enum ib_sig_type	sq_sig_type;
+	enum ib_qp_type		qp_type;
+	u8			port_num; /* special QP types only */
+};
+
+enum ib_rnr_timeout {
+	IB_RNR_TIMER_655_36 =  0,
+	IB_RNR_TIMER_000_01 =  1,
+	IB_RNR_TIMER_000_02 =  2,
+	IB_RNR_TIMER_000_03 =  3,
+	IB_RNR_TIMER_000_04 =  4,
+	IB_RNR_TIMER_000_06 =  5,
+	IB_RNR_TIMER_000_08 =  6,
+	IB_RNR_TIMER_000_12 =  7,
+	IB_RNR_TIMER_000_16 =  8,
+	IB_RNR_TIMER_000_24 =  9,
+	IB_RNR_TIMER_000_32 = 10,
+	IB_RNR_TIMER_000_48 = 11,
+	IB_RNR_TIMER_000_64 = 12,
+	IB_RNR_TIMER_000_96 = 13,
+	IB_RNR_TIMER_001_28 = 14,
+	IB_RNR_TIMER_001_92 = 15,
+	IB_RNR_TIMER_002_56 = 16,
+	IB_RNR_TIMER_003_84 = 17,
+	IB_RNR_TIMER_005_12 = 18,
+	IB_RNR_TIMER_007_68 = 19,
+	IB_RNR_TIMER_010_24 = 20,
+	IB_RNR_TIMER_015_36 = 21,
+	IB_RNR_TIMER_020_48 = 22,
+	IB_RNR_TIMER_030_72 = 23,
+	IB_RNR_TIMER_040_96 = 24,
+	IB_RNR_TIMER_061_44 = 25,
+	IB_RNR_TIMER_081_92 = 26,
+	IB_RNR_TIMER_122_88 = 27,
+	IB_RNR_TIMER_163_84 = 28,
+	IB_RNR_TIMER_245_76 = 29,
+	IB_RNR_TIMER_327_68 = 30,
+	IB_RNR_TIMER_491_52 = 31
+};
+
+enum ib_qp_attr_mask {
+	IB_QP_STATE			= 1,
+	IB_QP_CUR_STATE			= (1<<1),
+	IB_QP_EN_SQD_ASYNC_NOTIFY	= (1<<2),
+	IB_QP_ACCESS_FLAGS		= (1<<3),
+	IB_QP_PKEY_INDEX		= (1<<4),
+	IB_QP_PORT			= (1<<5),
+	IB_QP_QKEY			= (1<<6),
+	IB_QP_AV			= (1<<7),
+	IB_QP_PATH_MTU			= (1<<8),
+	IB_QP_TIMEOUT			= (1<<9),
+	IB_QP_RETRY_CNT			= (1<<10),
+	IB_QP_RNR_RETRY			= (1<<11),
+	IB_QP_RQ_PSN			= (1<<12),
+	IB_QP_MAX_QP_RD_ATOMIC		= (1<<13),
+	IB_QP_ALT_PATH			= (1<<14),
+	IB_QP_MIN_RNR_TIMER		= (1<<15),
+	IB_QP_SQ_PSN			= (1<<16),
+	IB_QP_MAX_DEST_RD_ATOMIC	= (1<<17),
+	IB_QP_PATH_MIG_STATE		= (1<<18),
+	IB_QP_CAP			= (1<<19),
+	IB_QP_DEST_QPN			= (1<<20)
+};
+
+enum ib_qp_state {
+	IB_QPS_RESET,
+	IB_QPS_INIT,
+	IB_QPS_RTR,
+	IB_QPS_RTS,
+	IB_QPS_SQD,
+	IB_QPS_SQE,
+	IB_QPS_ERR
+};
+
+enum ib_mig_state {
+	IB_MIG_MIGRATED,
+	IB_MIG_REARM,
+	IB_MIG_ARMED
+};
+
+struct ib_qp_attr {
+	enum ib_qp_state	qp_state;
+	enum ib_qp_state	cur_qp_state;
+	enum ib_mtu		path_mtu;
+	enum ib_mig_state	path_mig_state;
+	u32			qkey;
+	u32			rq_psn;
+	u32			sq_psn;
+	u32			dest_qp_num;
+	int			qp_access_flags;
+	struct ib_qp_cap	cap;
+	struct ib_ah_attr	ah_attr;
+	struct ib_ah_attr	alt_ah_attr;
+	u16			pkey_index;
+	u16			alt_pkey_index;
+	u8			en_sqd_async_notify;
+	u8			sq_draining;
+	u8			max_rd_atomic;
+	u8			max_dest_rd_atomic;
+	u8			min_rnr_timer;
+	u8			port_num;
+	u8			timeout;
+	u8			retry_cnt;
+	u8			rnr_retry;
+	u8			alt_port_num;
+	u8			alt_timeout;
+};
+
+enum ib_wr_opcode {
+	IB_WR_RDMA_WRITE,
+	IB_WR_RDMA_WRITE_WITH_IMM,
+	IB_WR_SEND,
+	IB_WR_SEND_WITH_IMM,
+	IB_WR_RDMA_READ,
+	IB_WR_ATOMIC_CMP_AND_SWP,
+	IB_WR_ATOMIC_FETCH_AND_ADD
+};
+
+enum ib_send_flags {
+	IB_SEND_FENCE		= 1,
+	IB_SEND_SIGNALED	= (1<<1),
+	IB_SEND_SOLICITED	= (1<<2),
+	IB_SEND_INLINE		= (1<<3)
+};
+
+struct ib_sge {
+	u64	addr;
+	u32	length;
+	u32	lkey;
+};
+
+struct ib_send_wr {
+	struct ib_send_wr      *next;
+	u64			wr_id;
+	struct ib_sge	       *sg_list;
+	int			num_sge;
+	enum ib_wr_opcode	opcode;
+	int			send_flags;
+	__be32			imm_data;
+	union {
+		struct {
+			u64	remote_addr;
+			u32	rkey;
+		} rdma;
+		struct {
+			u64	remote_addr;
+			u64	compare_add;
+			u64	swap;
+			u32	rkey;
+		} atomic;
+		struct {
+			struct ib_ah *ah;
+			struct ib_mad_hdr *mad_hdr;
+			u32	remote_qpn;
+			u32	remote_qkey;
+			int	timeout_ms; /* valid for MADs only */
+			int	retries;    /* valid for MADs only */
+			u16	pkey_index; /* valid for GSI only */
+			u8	port_num;   /* valid for DR SMPs on switch only */
+		} ud;
+	} wr;
+};
+
+struct ib_recv_wr {
+	struct ib_recv_wr      *next;
+	u64			wr_id;
+	struct ib_sge	       *sg_list;
+	int			num_sge;
+};
+
+enum ib_access_flags {
+	IB_ACCESS_LOCAL_WRITE	= 1,
+	IB_ACCESS_REMOTE_WRITE	= (1<<1),
+	IB_ACCESS_REMOTE_READ	= (1<<2),
+	IB_ACCESS_REMOTE_ATOMIC	= (1<<3),
+	IB_ACCESS_MW_BIND	= (1<<4)
+};
+
+struct ib_phys_buf {
+	u64      addr;
+	u64      size;
+};
+
+struct ib_mr_attr {
+	struct ib_pd	*pd;
+	u64		device_virt_addr;
+	u64		size;
+	int		mr_access_flags;
+	u32		lkey;
+	u32		rkey;
+};
+
+enum ib_mr_rereg_flags {
+	IB_MR_REREG_TRANS	= 1,
+	IB_MR_REREG_PD		= (1<<1),
+	IB_MR_REREG_ACCESS	= (1<<2)
+};
+
+struct ib_mw_bind {
+	struct ib_mr   *mr;
+	u64		wr_id;
+	u64		addr;
+	u32		length;
+	int		send_flags;
+	int		mw_access_flags;
+};
+
+struct ib_fmr_attr {
+	int	max_pages;
+	int	max_maps;
+	u8	page_size;
+};
+
+struct ib_ucontext {
+	struct ib_device       *device;
+	struct list_head	pd_list;
+	struct list_head	mr_list;
+	struct list_head	mw_list;
+	struct list_head	cq_list;
+	struct list_head	qp_list;
+	struct list_head	srq_list;
+	struct list_head	ah_list;
+	spinlock_t              lock;
+};
+
+struct ib_uobject {
+	u64			user_handle;	/* handle given to us by userspace */
+	struct ib_ucontext     *context;	/* associated user context */
+	struct list_head	list;		/* link to context's list */
+	u32			id;		/* index into kernel idr */
+};
+
+struct ib_umem {
+	unsigned long		user_base;
+	unsigned long		virt_base;
+	size_t			length;
+	int			offset;
+	int			page_size;
+	int                     writable;
+	struct list_head	chunk_list;
+};
+
+struct ib_umem_chunk {
+	struct list_head	list;
+	int                     nents;
+	int                     nmap;
+	struct scatterlist      page_list[0];
+};
+
+struct ib_udata {
+	void __user *inbuf;
+	void __user *outbuf;
+	size_t       inlen;
+	size_t       outlen;
+};
+
+#define IB_UMEM_MAX_PAGE_CHUNK						\
+	((PAGE_SIZE - offsetof(struct ib_umem_chunk, page_list)) /	\
+	 ((void *) &((struct ib_umem_chunk *) 0)->page_list[1] -	\
+	  (void *) &((struct ib_umem_chunk *) 0)->page_list[0]))
+
+struct ib_umem_object {
+	struct ib_uobject	uobject;
+	struct ib_umem		umem;
+};
+
+struct ib_pd {
+	struct ib_device       *device;
+	struct ib_uobject      *uobject;
+	atomic_t          	usecnt; /* count all resources */
+};
+
+struct ib_ah {
+	struct ib_device	*device;
+	struct ib_pd		*pd;
+	struct ib_uobject	*uobject;
+};
+
+typedef void (*ib_comp_handler)(struct ib_cq *cq, void *cq_context);
+
+struct ib_cq {
+	struct ib_device       *device;
+	struct ib_uobject      *uobject;
+	ib_comp_handler   	comp_handler;
+	void                  (*event_handler)(struct ib_event *, void *);
+	void *            	cq_context;
+	int               	cqe;
+	atomic_t          	usecnt; /* count number of work queues */
+};
+
+struct ib_srq {
+	struct ib_device       *device;
+	struct ib_pd	       *pd;
+	struct ib_uobject      *uobject;
+	void		      (*event_handler)(struct ib_event *, void *);
+	void		       *srq_context;
+	atomic_t		usecnt;
+};
+
+struct ib_qp {
+	struct ib_device       *device;
+	struct ib_pd	       *pd;
+	struct ib_cq	       *send_cq;
+	struct ib_cq	       *recv_cq;
+	struct ib_srq	       *srq;
+	struct ib_uobject      *uobject;
+	void                  (*event_handler)(struct ib_event *, void *);
+	void		       *qp_context;
+	u32			qp_num;
+	enum ib_qp_type		qp_type;
+};
+
+struct ib_mr {
+	struct ib_device  *device;
+	struct ib_pd	  *pd;
+	struct ib_uobject *uobject;
+	u32		   lkey;
+	u32		   rkey;
+	atomic_t	   usecnt; /* count number of MWs */
+};
+
+struct ib_mw {
+	struct ib_device	*device;
+	struct ib_pd		*pd;
+	struct ib_uobject	*uobject;
+	u32			rkey;
+};
+
+struct ib_fmr {
+	struct ib_device	*device;
+	struct ib_pd		*pd;
+	struct list_head	list;
+	u32			lkey;
+	u32			rkey;
+};
+
+struct ib_mad;
+struct ib_grh;
+
+enum ib_process_mad_flags {
+	IB_MAD_IGNORE_MKEY	= 1,
+	IB_MAD_IGNORE_BKEY	= 2,
+	IB_MAD_IGNORE_ALL	= IB_MAD_IGNORE_MKEY | IB_MAD_IGNORE_BKEY
+};
+
+enum ib_mad_result {
+	IB_MAD_RESULT_FAILURE  = 0,      /* (!SUCCESS is the important flag) */
+	IB_MAD_RESULT_SUCCESS  = 1 << 0, /* MAD was successfully processed   */
+	IB_MAD_RESULT_REPLY    = 1 << 1, /* Reply packet needs to be sent    */
+	IB_MAD_RESULT_CONSUMED = 1 << 2  /* Packet consumed: stop processing */
+};
+
+#define IB_DEVICE_NAME_MAX 64
+
+struct ib_cache {
+	rwlock_t                lock;
+	struct ib_event_handler event_handler;
+	struct ib_pkey_cache  **pkey_cache;
+	struct ib_gid_cache   **gid_cache;
+};
+
+struct ib_device {
+	struct device                *dma_device;
+
+	char                          name[IB_DEVICE_NAME_MAX];
+
+	struct list_head              event_handler_list;
+	spinlock_t                    event_handler_lock;
+
+	struct list_head              core_list;
+	struct list_head              client_data_list;
+	spinlock_t                    client_data_lock;
+
+	struct ib_cache               cache;
+
+	u32                           flags;
+
+	int		           (*query_device)(struct ib_device *device,
+						   struct ib_device_attr *device_attr);
+	int		           (*query_port)(struct ib_device *device,
+						 u8 port_num,
+						 struct ib_port_attr *port_attr);
+	int		           (*query_gid)(struct ib_device *device,
+						u8 port_num, int index,
+						union ib_gid *gid);
+	int		           (*query_pkey)(struct ib_device *device,
+						 u8 port_num, u16 index, u16 *pkey);
+	int		           (*modify_device)(struct ib_device *device,
+						    int device_modify_mask,
+						    struct ib_device_modify *device_modify);
+	int		           (*modify_port)(struct ib_device *device,
+						  u8 port_num, int port_modify_mask,
+						  struct ib_port_modify *port_modify);
+	struct ib_ucontext *       (*alloc_ucontext)(struct ib_device *device,
+						     struct ib_udata *udata);
+	int                        (*dealloc_ucontext)(struct ib_ucontext *context);
+	int                        (*mmap)(struct ib_ucontext *context,
+					   struct vm_area_struct *vma);
+	struct ib_pd *             (*alloc_pd)(struct ib_device *device,
+					       struct ib_ucontext *context,
+					       struct ib_udata *udata);
+	int                        (*dealloc_pd)(struct ib_pd *pd);
+	struct ib_ah *             (*create_ah)(struct ib_pd *pd,
+						struct ib_ah_attr *ah_attr);
+	int                        (*modify_ah)(struct ib_ah *ah,
+						struct ib_ah_attr *ah_attr);
+	int                        (*query_ah)(struct ib_ah *ah,
+					       struct ib_ah_attr *ah_attr);
+	int                        (*destroy_ah)(struct ib_ah *ah);
+	struct ib_srq *            (*create_srq)(struct ib_pd *pd,
+						 struct ib_srq_init_attr *srq_init_attr,
+						 struct ib_udata *udata);
+	int                        (*modify_srq)(struct ib_srq *srq,
+						 struct ib_srq_attr *srq_attr,
+						 enum ib_srq_attr_mask srq_attr_mask);
+	int                        (*query_srq)(struct ib_srq *srq,
+						struct ib_srq_attr *srq_attr);
+	int                        (*destroy_srq)(struct ib_srq *srq);
+	int                        (*post_srq_recv)(struct ib_srq *srq,
+						    struct ib_recv_wr *recv_wr,
+						    struct ib_recv_wr **bad_recv_wr);
+	struct ib_qp *             (*create_qp)(struct ib_pd *pd,
+						struct ib_qp_init_attr *qp_init_attr,
+						struct ib_udata *udata);
+	int                        (*modify_qp)(struct ib_qp *qp,
+						struct ib_qp_attr *qp_attr,
+						int qp_attr_mask);
+	int                        (*query_qp)(struct ib_qp *qp,
+					       struct ib_qp_attr *qp_attr,
+					       int qp_attr_mask,
+					       struct ib_qp_init_attr *qp_init_attr);
+	int                        (*destroy_qp)(struct ib_qp *qp);
+	int                        (*post_send)(struct ib_qp *qp,
+						struct ib_send_wr *send_wr,
+						struct ib_send_wr **bad_send_wr);
+	int                        (*post_recv)(struct ib_qp *qp,
+						struct ib_recv_wr *recv_wr,
+						struct ib_recv_wr **bad_recv_wr);
+	struct ib_cq *             (*create_cq)(struct ib_device *device, int cqe,
+						struct ib_ucontext *context,
+						struct ib_udata *udata);
+	int                        (*destroy_cq)(struct ib_cq *cq);
+	int                        (*resize_cq)(struct ib_cq *cq, int *cqe);
+	int                        (*poll_cq)(struct ib_cq *cq, int num_entries,
+					      struct ib_wc *wc);
+	int                        (*peek_cq)(struct ib_cq *cq, int wc_cnt);
+	int                        (*req_notify_cq)(struct ib_cq *cq,
+						    enum ib_cq_notify cq_notify);
+	int                        (*req_ncomp_notif)(struct ib_cq *cq,
+						      int wc_cnt);
+	struct ib_mr *             (*get_dma_mr)(struct ib_pd *pd,
+						 int mr_access_flags);
+	struct ib_mr *             (*reg_phys_mr)(struct ib_pd *pd,
+						  struct ib_phys_buf *phys_buf_array,
+						  int num_phys_buf,
+						  int mr_access_flags,
+						  u64 *iova_start);
+	struct ib_mr *             (*reg_user_mr)(struct ib_pd *pd,
+						  struct ib_umem *region,
+						  int mr_access_flags,
+						  struct ib_udata *udata);
+	int                        (*query_mr)(struct ib_mr *mr,
+					       struct ib_mr_attr *mr_attr);
+	int                        (*dereg_mr)(struct ib_mr *mr);
+	int                        (*rereg_phys_mr)(struct ib_mr *mr,
+						    int mr_rereg_mask,
+						    struct ib_pd *pd,
+						    struct ib_phys_buf *phys_buf_array,
+						    int num_phys_buf,
+						    int mr_access_flags,
+						    u64 *iova_start);
+	struct ib_mw *             (*alloc_mw)(struct ib_pd *pd);
+	int                        (*bind_mw)(struct ib_qp *qp,
+					      struct ib_mw *mw,
+					      struct ib_mw_bind *mw_bind);
+	int                        (*dealloc_mw)(struct ib_mw *mw);
+	struct ib_fmr *	           (*alloc_fmr)(struct ib_pd *pd,
+						int mr_access_flags,
+						struct ib_fmr_attr *fmr_attr);
+	int		           (*map_phys_fmr)(struct ib_fmr *fmr,
+						   u64 *page_list, int list_len,
+						   u64 iova);
+	int		           (*unmap_fmr)(struct list_head *fmr_list);
+	int		           (*dealloc_fmr)(struct ib_fmr *fmr);
+	int                        (*attach_mcast)(struct ib_qp *qp,
+						   union ib_gid *gid,
+						   u16 lid);
+	int                        (*detach_mcast)(struct ib_qp *qp,
+						   union ib_gid *gid,
+						   u16 lid);
+	int                        (*process_mad)(struct ib_device *device,
+						  int process_mad_flags,
+						  u8 port_num,
+						  struct ib_wc *in_wc,
+						  struct ib_grh *in_grh,
+						  struct ib_mad *in_mad,
+						  struct ib_mad *out_mad);
+
+	struct module               *owner;
+	struct class_device          class_dev;
+	struct kobject               ports_parent;
+	struct list_head             port_list;
+
+	enum {
+		IB_DEV_UNINITIALIZED,
+		IB_DEV_REGISTERED,
+		IB_DEV_UNREGISTERED
+	}                            reg_state;
+
+	u8                           node_type;
+	u8                           phys_port_cnt;
+};
+
+struct ib_client {
+	char  *name;
+	void (*add)   (struct ib_device *);
+	void (*remove)(struct ib_device *);
+
+	struct list_head list;
+};
+
+struct ib_device *ib_alloc_device(size_t size);
+void ib_dealloc_device(struct ib_device *device);
+
+int ib_register_device   (struct ib_device *device);
+void ib_unregister_device(struct ib_device *device);
+
+int ib_register_client   (struct ib_client *client);
+void ib_unregister_client(struct ib_client *client);
+
+void *ib_get_client_data(struct ib_device *device, struct ib_client *client);
+void  ib_set_client_data(struct ib_device *device, struct ib_client *client,
+			 void *data);
+
+static inline int ib_copy_from_udata(void *dest, struct ib_udata *udata, size_t len)
+{
+	return copy_from_user(dest, udata->inbuf, len) ? -EFAULT : 0;
+}
+
+static inline int ib_copy_to_udata(struct ib_udata *udata, void *src, size_t len)
+{
+	return copy_to_user(udata->outbuf, src, len) ? -EFAULT : 0;
+}
+
+int ib_register_event_handler  (struct ib_event_handler *event_handler);
+int ib_unregister_event_handler(struct ib_event_handler *event_handler);
+void ib_dispatch_event(struct ib_event *event);
+
+int ib_query_device(struct ib_device *device,
+		    struct ib_device_attr *device_attr);
+
+int ib_query_port(struct ib_device *device,
+		  u8 port_num, struct ib_port_attr *port_attr);
+
+int ib_query_gid(struct ib_device *device,
+		 u8 port_num, int index, union ib_gid *gid);
+
+int ib_query_pkey(struct ib_device *device,
+		  u8 port_num, u16 index, u16 *pkey);
+
+int ib_modify_device(struct ib_device *device,
+		     int device_modify_mask,
+		     struct ib_device_modify *device_modify);
+
+int ib_modify_port(struct ib_device *device,
+		   u8 port_num, int port_modify_mask,
+		   struct ib_port_modify *port_modify);
+
+/**
+ * ib_alloc_pd - Allocates an unused protection domain.
+ * @device: The device on which to allocate the protection domain.
+ *
+ * A protection domain object provides an association between QPs, shared
+ * receive queues, address handles, memory regions, and memory windows.
+ */
+struct ib_pd *ib_alloc_pd(struct ib_device *device);
+
+/**
+ * ib_dealloc_pd - Deallocates a protection domain.
+ * @pd: The protection domain to deallocate.
+ */
+int ib_dealloc_pd(struct ib_pd *pd);
+
+/**
+ * ib_create_ah - Creates an address handle for the given address vector.
+ * @pd: The protection domain associated with the address handle.
+ * @ah_attr: The attributes of the address vector.
+ *
+ * The address handle is used to reference a local or global destination
+ * in all UD QP post sends.
+ */
+struct ib_ah *ib_create_ah(struct ib_pd *pd, struct ib_ah_attr *ah_attr);
+
+/**
+ * ib_create_ah_from_wc - Creates an address handle associated with the
+ *   sender of the specified work completion.
+ * @pd: The protection domain associated with the address handle.
+ * @wc: Work completion information associated with a received message.
+ * @grh: References the received global route header.  This parameter is
+ *   ignored unless the work completion indicates that the GRH is valid.
+ * @port_num: The outbound port number to associate with the address.
+ *
+ * The address handle is used to reference a local or global destination
+ * in all UD QP post sends.
+ */
+struct ib_ah *ib_create_ah_from_wc(struct ib_pd *pd, struct ib_wc *wc,
+				   struct ib_grh *grh, u8 port_num);
+
+/**
+ * ib_modify_ah - Modifies the address vector associated with an address
+ *   handle.
+ * @ah: The address handle to modify.
+ * @ah_attr: The new address vector attributes to associate with the
+ *   address handle.
+ */
+int ib_modify_ah(struct ib_ah *ah, struct ib_ah_attr *ah_attr);
+
+/**
+ * ib_query_ah - Queries the address vector associated with an address
+ *   handle.
+ * @ah: The address handle to query.
+ * @ah_attr: The address vector attributes associated with the address
+ *   handle.
+ */
+int ib_query_ah(struct ib_ah *ah, struct ib_ah_attr *ah_attr);
+
+/**
+ * ib_destroy_ah - Destroys an address handle.
+ * @ah: The address handle to destroy.
+ */
+int ib_destroy_ah(struct ib_ah *ah);
+
+/**
+ * ib_create_srq - Creates a SRQ associated with the specified protection
+ *   domain.
+ * @pd: The protection domain associated with the SRQ.
+ * @srq_init_attr: A list of initial attributes required to create the SRQ.
+ *
+ * srq_attr->max_wr and srq_attr->max_sge are read the determine the
+ * requested size of the SRQ, and set to the actual values allocated
+ * on return.  If ib_create_srq() succeeds, then max_wr and max_sge
+ * will always be at least as large as the requested values.
+ */
+struct ib_srq *ib_create_srq(struct ib_pd *pd,
+			     struct ib_srq_init_attr *srq_init_attr);
+
+/**
+ * ib_modify_srq - Modifies the attributes for the specified SRQ.
+ * @srq: The SRQ to modify.
+ * @srq_attr: On input, specifies the SRQ attributes to modify.  On output,
+ *   the current values of selected SRQ attributes are returned.
+ * @srq_attr_mask: A bit-mask used to specify which attributes of the SRQ
+ *   are being modified.
+ *
+ * The mask may contain IB_SRQ_MAX_WR to resize the SRQ and/or
+ * IB_SRQ_LIMIT to set the SRQ's limit and request notification when
+ * the number of receives queued drops below the limit.
+ */
+int ib_modify_srq(struct ib_srq *srq,
+		  struct ib_srq_attr *srq_attr,
+		  enum ib_srq_attr_mask srq_attr_mask);
+
+/**
+ * ib_query_srq - Returns the attribute list and current values for the
+ *   specified SRQ.
+ * @srq: The SRQ to query.
+ * @srq_attr: The attributes of the specified SRQ.
+ */
+int ib_query_srq(struct ib_srq *srq,
+		 struct ib_srq_attr *srq_attr);
+
+/**
+ * ib_destroy_srq - Destroys the specified SRQ.
+ * @srq: The SRQ to destroy.
+ */
+int ib_destroy_srq(struct ib_srq *srq);
+
+/**
+ * ib_post_srq_recv - Posts a list of work requests to the specified SRQ.
+ * @srq: The SRQ to post the work request on.
+ * @recv_wr: A list of work requests to post on the receive queue.
+ * @bad_recv_wr: On an immediate failure, this parameter will reference
+ *   the work request that failed to be posted on the QP.
+ */
+static inline int ib_post_srq_recv(struct ib_srq *srq,
+				   struct ib_recv_wr *recv_wr,
+				   struct ib_recv_wr **bad_recv_wr)
+{
+	return srq->device->post_srq_recv(srq, recv_wr, bad_recv_wr);
+}
+
+/**
+ * ib_create_qp - Creates a QP associated with the specified protection
+ *   domain.
+ * @pd: The protection domain associated with the QP.
+ * @qp_init_attr: A list of initial attributes required to create the QP.
+ */
+struct ib_qp *ib_create_qp(struct ib_pd *pd,
+			   struct ib_qp_init_attr *qp_init_attr);
+
+/**
+ * ib_modify_qp - Modifies the attributes for the specified QP and then
+ *   transitions the QP to the given state.
+ * @qp: The QP to modify.
+ * @qp_attr: On input, specifies the QP attributes to modify.  On output,
+ *   the current values of selected QP attributes are returned.
+ * @qp_attr_mask: A bit-mask used to specify which attributes of the QP
+ *   are being modified.
+ */
+int ib_modify_qp(struct ib_qp *qp,
+		 struct ib_qp_attr *qp_attr,
+		 int qp_attr_mask);
+
+/**
+ * ib_query_qp - Returns the attribute list and current values for the
+ *   specified QP.
+ * @qp: The QP to query.
+ * @qp_attr: The attributes of the specified QP.
+ * @qp_attr_mask: A bit-mask used to select specific attributes to query.
+ * @qp_init_attr: Additional attributes of the selected QP.
+ *
+ * The qp_attr_mask may be used to limit the query to gathering only the
+ * selected attributes.
+ */
+int ib_query_qp(struct ib_qp *qp,
+		struct ib_qp_attr *qp_attr,
+		int qp_attr_mask,
+		struct ib_qp_init_attr *qp_init_attr);
+
+/**
+ * ib_destroy_qp - Destroys the specified QP.
+ * @qp: The QP to destroy.
+ */
+int ib_destroy_qp(struct ib_qp *qp);
+
+/**
+ * ib_post_send - Posts a list of work requests to the send queue of
+ *   the specified QP.
+ * @qp: The QP to post the work request on.
+ * @send_wr: A list of work requests to post on the send queue.
+ * @bad_send_wr: On an immediate failure, this parameter will reference
+ *   the work request that failed to be posted on the QP.
+ */
+static inline int ib_post_send(struct ib_qp *qp,
+			       struct ib_send_wr *send_wr,
+			       struct ib_send_wr **bad_send_wr)
+{
+	return qp->device->post_send(qp, send_wr, bad_send_wr);
+}
+
+/**
+ * ib_post_recv - Posts a list of work requests to the receive queue of
+ *   the specified QP.
+ * @qp: The QP to post the work request on.
+ * @recv_wr: A list of work requests to post on the receive queue.
+ * @bad_recv_wr: On an immediate failure, this parameter will reference
+ *   the work request that failed to be posted on the QP.
+ */
+static inline int ib_post_recv(struct ib_qp *qp,
+			       struct ib_recv_wr *recv_wr,
+			       struct ib_recv_wr **bad_recv_wr)
+{
+	return qp->device->post_recv(qp, recv_wr, bad_recv_wr);
+}
+
+/**
+ * ib_create_cq - Creates a CQ on the specified device.
+ * @device: The device on which to create the CQ.
+ * @comp_handler: A user-specified callback that is invoked when a
+ *   completion event occurs on the CQ.
+ * @event_handler: A user-specified callback that is invoked when an
+ *   asynchronous event not associated with a completion occurs on the CQ.
+ * @cq_context: Context associated with the CQ returned to the user via
+ *   the associated completion and event handlers.
+ * @cqe: The minimum size of the CQ.
+ *
+ * Users can examine the cq structure to determine the actual CQ size.
+ */
+struct ib_cq *ib_create_cq(struct ib_device *device,
+			   ib_comp_handler comp_handler,
+			   void (*event_handler)(struct ib_event *, void *),
+			   void *cq_context, int cqe);
+
+/**
+ * ib_resize_cq - Modifies the capacity of the CQ.
+ * @cq: The CQ to resize.
+ * @cqe: The minimum size of the CQ.
+ *
+ * Users can examine the cq structure to determine the actual CQ size.
+ */
+int ib_resize_cq(struct ib_cq *cq, int cqe);
+
+/**
+ * ib_destroy_cq - Destroys the specified CQ.
+ * @cq: The CQ to destroy.
+ */
+int ib_destroy_cq(struct ib_cq *cq);
+
+/**
+ * ib_poll_cq - poll a CQ for completion(s)
+ * @cq:the CQ being polled
+ * @num_entries:maximum number of completions to return
+ * @wc:array of at least @num_entries &struct ib_wc where completions
+ *   will be returned
+ *
+ * Poll a CQ for (possibly multiple) completions.  If the return value
+ * is < 0, an error occurred.  If the return value is >= 0, it is the
+ * number of completions returned.  If the return value is
+ * non-negative and < num_entries, then the CQ was emptied.
+ */
+static inline int ib_poll_cq(struct ib_cq *cq, int num_entries,
+			     struct ib_wc *wc)
+{
+	return cq->device->poll_cq(cq, num_entries, wc);
+}
+
+/**
+ * ib_peek_cq - Returns the number of unreaped completions currently
+ *   on the specified CQ.
+ * @cq: The CQ to peek.
+ * @wc_cnt: A minimum number of unreaped completions to check for.
+ *
+ * If the number of unreaped completions is greater than or equal to wc_cnt,
+ * this function returns wc_cnt, otherwise, it returns the actual number of
+ * unreaped completions.
+ */
+int ib_peek_cq(struct ib_cq *cq, int wc_cnt);
+
+/**
+ * ib_req_notify_cq - Request completion notification on a CQ.
+ * @cq: The CQ to generate an event for.
+ * @cq_notify: If set to %IB_CQ_SOLICITED, completion notification will
+ *   occur on the next solicited event. If set to %IB_CQ_NEXT_COMP,
+ *   notification will occur on the next completion.
+ */
+static inline int ib_req_notify_cq(struct ib_cq *cq,
+				   enum ib_cq_notify cq_notify)
+{
+	return cq->device->req_notify_cq(cq, cq_notify);
+}
+
+/**
+ * ib_req_ncomp_notif - Request completion notification when there are
+ *   at least the specified number of unreaped completions on the CQ.
+ * @cq: The CQ to generate an event for.
+ * @wc_cnt: The number of unreaped completions that should be on the
+ *   CQ before an event is generated.
+ */
+static inline int ib_req_ncomp_notif(struct ib_cq *cq, int wc_cnt)
+{
+	return cq->device->req_ncomp_notif ?
+		cq->device->req_ncomp_notif(cq, wc_cnt) :
+		-ENOSYS;
+}
+
+/**
+ * ib_get_dma_mr - Returns a memory region for system memory that is
+ *   usable for DMA.
+ * @pd: The protection domain associated with the memory region.
+ * @mr_access_flags: Specifies the memory access rights.
+ */
+struct ib_mr *ib_get_dma_mr(struct ib_pd *pd, int mr_access_flags);
+
+/**
+ * ib_reg_phys_mr - Prepares a virtually addressed memory region for use
+ *   by an HCA.
+ * @pd: The protection domain associated assigned to the registered region.
+ * @phys_buf_array: Specifies a list of physical buffers to use in the
+ *   memory region.
+ * @num_phys_buf: Specifies the size of the phys_buf_array.
+ * @mr_access_flags: Specifies the memory access rights.
+ * @iova_start: The offset of the region's starting I/O virtual address.
+ */
+struct ib_mr *ib_reg_phys_mr(struct ib_pd *pd,
+			     struct ib_phys_buf *phys_buf_array,
+			     int num_phys_buf,
+			     int mr_access_flags,
+			     u64 *iova_start);
+
+/**
+ * ib_rereg_phys_mr - Modifies the attributes of an existing memory region.
+ *   Conceptually, this call performs the functions deregister memory region
+ *   followed by register physical memory region.  Where possible,
+ *   resources are reused instead of deallocated and reallocated.
+ * @mr: The memory region to modify.
+ * @mr_rereg_mask: A bit-mask used to indicate which of the following
+ *   properties of the memory region are being modified.
+ * @pd: If %IB_MR_REREG_PD is set in mr_rereg_mask, this field specifies
+ *   the new protection domain to associated with the memory region,
+ *   otherwise, this parameter is ignored.
+ * @phys_buf_array: If %IB_MR_REREG_TRANS is set in mr_rereg_mask, this
+ *   field specifies a list of physical buffers to use in the new
+ *   translation, otherwise, this parameter is ignored.
+ * @num_phys_buf: If %IB_MR_REREG_TRANS is set in mr_rereg_mask, this
+ *   field specifies the size of the phys_buf_array, otherwise, this
+ *   parameter is ignored.
+ * @mr_access_flags: If %IB_MR_REREG_ACCESS is set in mr_rereg_mask, this
+ *   field specifies the new memory access rights, otherwise, this
+ *   parameter is ignored.
+ * @iova_start: The offset of the region's starting I/O virtual address.
+ */
+int ib_rereg_phys_mr(struct ib_mr *mr,
+		     int mr_rereg_mask,
+		     struct ib_pd *pd,
+		     struct ib_phys_buf *phys_buf_array,
+		     int num_phys_buf,
+		     int mr_access_flags,
+		     u64 *iova_start);
+
+/**
+ * ib_query_mr - Retrieves information about a specific memory region.
+ * @mr: The memory region to retrieve information about.
+ * @mr_attr: The attributes of the specified memory region.
+ */
+int ib_query_mr(struct ib_mr *mr, struct ib_mr_attr *mr_attr);
+
+/**
+ * ib_dereg_mr - Deregisters a memory region and removes it from the
+ *   HCA translation table.
+ * @mr: The memory region to deregister.
+ */
+int ib_dereg_mr(struct ib_mr *mr);
+
+/**
+ * ib_alloc_mw - Allocates a memory window.
+ * @pd: The protection domain associated with the memory window.
+ */
+struct ib_mw *ib_alloc_mw(struct ib_pd *pd);
+
+/**
+ * ib_bind_mw - Posts a work request to the send queue of the specified
+ *   QP, which binds the memory window to the given address range and
+ *   remote access attributes.
+ * @qp: QP to post the bind work request on.
+ * @mw: The memory window to bind.
+ * @mw_bind: Specifies information about the memory window, including
+ *   its address range, remote access rights, and associated memory region.
+ */
+static inline int ib_bind_mw(struct ib_qp *qp,
+			     struct ib_mw *mw,
+			     struct ib_mw_bind *mw_bind)
+{
+	/* XXX reference counting in corresponding MR? */
+	return mw->device->bind_mw ?
+		mw->device->bind_mw(qp, mw, mw_bind) :
+		-ENOSYS;
+}
+
+/**
+ * ib_dealloc_mw - Deallocates a memory window.
+ * @mw: The memory window to deallocate.
+ */
+int ib_dealloc_mw(struct ib_mw *mw);
+
+/**
+ * ib_alloc_fmr - Allocates a unmapped fast memory region.
+ * @pd: The protection domain associated with the unmapped region.
+ * @mr_access_flags: Specifies the memory access rights.
+ * @fmr_attr: Attributes of the unmapped region.
+ *
+ * A fast memory region must be mapped before it can be used as part of
+ * a work request.
+ */
+struct ib_fmr *ib_alloc_fmr(struct ib_pd *pd,
+			    int mr_access_flags,
+			    struct ib_fmr_attr *fmr_attr);
+
+/**
+ * ib_map_phys_fmr - Maps a list of physical pages to a fast memory region.
+ * @fmr: The fast memory region to associate with the pages.
+ * @page_list: An array of physical pages to map to the fast memory region.
+ * @list_len: The number of pages in page_list.
+ * @iova: The I/O virtual address to use with the mapped region.
+ */
+static inline int ib_map_phys_fmr(struct ib_fmr *fmr,
+				  u64 *page_list, int list_len,
+				  u64 iova)
+{
+	return fmr->device->map_phys_fmr(fmr, page_list, list_len, iova);
+}
+
+/**
+ * ib_unmap_fmr - Removes the mapping from a list of fast memory regions.
+ * @fmr_list: A linked list of fast memory regions to unmap.
+ */
+int ib_unmap_fmr(struct list_head *fmr_list);
+
+/**
+ * ib_dealloc_fmr - Deallocates a fast memory region.
+ * @fmr: The fast memory region to deallocate.
+ */
+int ib_dealloc_fmr(struct ib_fmr *fmr);
+
+/**
+ * ib_attach_mcast - Attaches the specified QP to a multicast group.
+ * @qp: QP to attach to the multicast group.  The QP must be type
+ *   IB_QPT_UD.
+ * @gid: Multicast group GID.
+ * @lid: Multicast group LID in host byte order.
+ *
+ * In order to send and receive multicast packets, subnet
+ * administration must have created the multicast group and configured
+ * the fabric appropriately.  The port associated with the specified
+ * QP must also be a member of the multicast group.
+ */
+int ib_attach_mcast(struct ib_qp *qp, union ib_gid *gid, u16 lid);
+
+/**
+ * ib_detach_mcast - Detaches the specified QP from a multicast group.
+ * @qp: QP to detach from the multicast group.
+ * @gid: Multicast group GID.
+ * @lid: Multicast group LID in host byte order.
+ */
+int ib_detach_mcast(struct ib_qp *qp, union ib_gid *gid, u16 lid);
+
+#endif /* IB_VERBS_H */