Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (48 commits)
  DMAENGINE: move COH901318 to arch_initcall
  dma: imx-dma: fix signedness bug
  dma/timberdale: simplify conditional
  ste_dma40: remove channel_type
  ste_dma40: remove enum for endianess
  ste_dma40: remove TIM_FOR_LINK option
  ste_dma40: move mode_opt to separate config
  ste_dma40: move channel mode to a separate field
  ste_dma40: move priority to separate field
  ste_dma40: add variable to indicate valid dma_cfg
  async_tx: make async_tx channel switching opt-in
  move async raid6 test to lib/Kconfig.debug
  dmaengine: Add Freescale i.MX1/21/27 DMA driver
  intel_mid_dma: change the slave interface
  intel_mid_dma: fix the WARN_ONs
  intel_mid_dma: Add sg list support to DMA driver
  intel_mid_dma: Allow DMAC2 to share interrupt
  intel_mid_dma: Allow IRQ sharing
  intel_mid_dma: Add runtime PM support
  DMAENGINE: define a dummy filter function for ste_dma40
  ...

3 files changed, 280 insertions, 18 deletions

diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h
new file mode 100644
index 000000000000..521a0f8974ac
--- /dev/null
+++ b/include/linux/amba/pl08x.h
@@ -0,0 +1,222 @@
+/*
+ * linux/amba/pl08x.h - ARM PrimeCell DMA Controller driver
+ *
+ * Copyright (C) 2005 ARM Ltd
+ * Copyright (C) 2010 ST-Ericsson SA
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * pl08x information required by platform code
+ *
+ * Please credit ARM.com
+ * Documentation: ARM DDI 0196D
+ *
+ */
+
+#ifndef AMBA_PL08X_H
+#define AMBA_PL08X_H
+
+/* We need sizes of structs from this header */
+#include <linux/dmaengine.h>
+#include <linux/interrupt.h>
+
+/**
+ * struct pl08x_channel_data - data structure to pass info between
+ * platform and PL08x driver regarding channel configuration
+ * @bus_id: name of this device channel, not just a device name since
+ * devices may have more than one channel e.g. "foo_tx"
+ * @min_signal: the minimum DMA signal number to be muxed in for this
+ * channel (for platforms supporting muxed signals). If you have
+ * static assignments, make sure this is set to the assigned signal
+ * number, PL08x have 16 possible signals in number 0 thru 15 so
+ * when these are not enough they often get muxed (in hardware)
+ * disabling simultaneous use of the same channel for two devices.
+ * @max_signal: the maximum DMA signal number to be muxed in for
+ * the channel. Set to the same as min_signal for
+ * devices with static assignments
+ * @muxval: a number usually used to poke into some mux regiser to
+ * mux in the signal to this channel
+ * @cctl_opt: default options for the channel control register
+ * @addr: source/target address in physical memory for this DMA channel,
+ * can be the address of a FIFO register for burst requests for example.
+ * This can be left undefined if the PrimeCell API is used for configuring
+ * this.
+ * @circular_buffer: whether the buffer passed in is circular and
+ * shall simply be looped round round (like a record baby round
+ * round round round)
+ * @single: the device connected to this channel will request single
+ * DMA transfers, not bursts. (Bursts are default.)
+ */
+struct pl08x_channel_data {
+	char *bus_id;
+	int min_signal;
+	int max_signal;
+	u32 muxval;
+	u32 cctl;
+	u32 ccfg;
+	dma_addr_t addr;
+	bool circular_buffer;
+	bool single;
+};
+
+/**
+ * Struct pl08x_bus_data - information of source or destination
+ * busses for a transfer
+ * @addr: current address
+ * @maxwidth: the maximum width of a transfer on this bus
+ * @buswidth: the width of this bus in bytes: 1, 2 or 4
+ * @fill_bytes: bytes required to fill to the next bus memory
+ * boundary
+ */
+struct pl08x_bus_data {
+	dma_addr_t addr;
+	u8 maxwidth;
+	u8 buswidth;
+	u32 fill_bytes;
+};
+
+/**
+ * struct pl08x_phy_chan - holder for the physical channels
+ * @id: physical index to this channel
+ * @lock: a lock to use when altering an instance of this struct
+ * @signal: the physical signal (aka channel) serving this
+ * physical channel right now
+ * @serving: the virtual channel currently being served by this
+ * physical channel
+ */
+struct pl08x_phy_chan {
+	unsigned int id;
+	void __iomem *base;
+	spinlock_t lock;
+	int signal;
+	struct pl08x_dma_chan *serving;
+	u32 csrc;
+	u32 cdst;
+	u32 clli;
+	u32 cctl;
+	u32 ccfg;
+};
+
+/**
+ * struct pl08x_txd - wrapper for struct dma_async_tx_descriptor
+ * @llis_bus: DMA memory address (physical) start for the LLIs
+ * @llis_va: virtual memory address start for the LLIs
+ */
+struct pl08x_txd {
+	struct dma_async_tx_descriptor tx;
+	struct list_head node;
+	enum dma_data_direction	direction;
+	struct pl08x_bus_data srcbus;
+	struct pl08x_bus_data dstbus;
+	int len;
+	dma_addr_t llis_bus;
+	void *llis_va;
+	struct pl08x_channel_data *cd;
+	bool active;
+	/*
+	 * Settings to be put into the physical channel when we
+	 * trigger this txd
+	 */
+	u32 csrc;
+	u32 cdst;
+	u32 clli;
+	u32 cctl;
+};
+
+/**
+ * struct pl08x_dma_chan_state - holds the PL08x specific virtual
+ * channel states
+ * @PL08X_CHAN_IDLE: the channel is idle
+ * @PL08X_CHAN_RUNNING: the channel has allocated a physical transport
+ * channel and is running a transfer on it
+ * @PL08X_CHAN_PAUSED: the channel has allocated a physical transport
+ * channel, but the transfer is currently paused
+ * @PL08X_CHAN_WAITING: the channel is waiting for a physical transport
+ * channel to become available (only pertains to memcpy channels)
+ */
+enum pl08x_dma_chan_state {
+	PL08X_CHAN_IDLE,
+	PL08X_CHAN_RUNNING,
+	PL08X_CHAN_PAUSED,
+	PL08X_CHAN_WAITING,
+};
+
+/**
+ * struct pl08x_dma_chan - this structure wraps a DMA ENGINE channel
+ * @chan: wrappped abstract channel
+ * @phychan: the physical channel utilized by this channel, if there is one
+ * @tasklet: tasklet scheduled by the IRQ to handle actual work etc
+ * @name: name of channel
+ * @cd: channel platform data
+ * @runtime_addr: address for RX/TX according to the runtime config
+ * @runtime_direction: current direction of this channel according to
+ * runtime config
+ * @lc: last completed transaction on this channel
+ * @desc_list: queued transactions pending on this channel
+ * @at: active transaction on this channel
+ * @lockflags: sometimes we let a lock last between two function calls,
+ * especially prep/submit, and then we need to store the IRQ flags
+ * in the channel state, here
+ * @lock: a lock for this channel data
+ * @host: a pointer to the host (internal use)
+ * @state: whether the channel is idle, paused, running etc
+ * @slave: whether this channel is a device (slave) or for memcpy
+ * @waiting: a TX descriptor on this channel which is waiting for
+ * a physical channel to become available
+ */
+struct pl08x_dma_chan {
+	struct dma_chan chan;
+	struct pl08x_phy_chan *phychan;
+	struct tasklet_struct tasklet;
+	char *name;
+	struct pl08x_channel_data *cd;
+	dma_addr_t runtime_addr;
+	enum dma_data_direction	runtime_direction;
+	atomic_t last_issued;
+	dma_cookie_t lc;
+	struct list_head desc_list;
+	struct pl08x_txd *at;
+	unsigned long lockflags;
+	spinlock_t lock;
+	void *host;
+	enum pl08x_dma_chan_state state;
+	bool slave;
+	struct pl08x_txd *waiting;
+};
+
+/**
+ * struct pl08x_platform_data - the platform configuration for the
+ * PL08x PrimeCells.
+ * @slave_channels: the channels defined for the different devices on the
+ * platform, all inclusive, including multiplexed channels. The available
+ * physical channels will be multiplexed around these signals as they
+ * are requested, just enumerate all possible channels.
+ * @get_signal: request a physical signal to be used for a DMA
+ * transfer immediately: if there is some multiplexing or similar blocking
+ * the use of the channel the transfer can be denied by returning
+ * less than zero, else it returns the allocated signal number
+ * @put_signal: indicate to the platform that this physical signal is not
+ * running any DMA transfer and multiplexing can be recycled
+ * @bus_bit_lli: Bit[0] of the address indicated which AHB bus master the
+ * LLI addresses are on 0/1 Master 1/2.
+ */
+struct pl08x_platform_data {
+	struct pl08x_channel_data *slave_channels;
+	unsigned int num_slave_channels;
+	struct pl08x_channel_data memcpy_channel;
+	int (*get_signal)(struct pl08x_dma_chan *);
+	void (*put_signal)(struct pl08x_dma_chan *);
+};
+
+#ifdef CONFIG_AMBA_PL08X
+bool pl08x_filter_id(struct dma_chan *chan, void *chan_id);
+#else
+static inline bool pl08x_filter_id(struct dma_chan *chan, void *chan_id)
+{
+	return false;
+}
+#endif
+
+#endif	/* AMBA_PL08X_H */
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index e2106495cc11..9d8688b92d8b 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -64,13 +64,15 @@ enum dma_transaction_type {
 	DMA_PQ_VAL,
 	DMA_MEMSET,
 	DMA_INTERRUPT,
+	DMA_SG,
 	DMA_PRIVATE,
 	DMA_ASYNC_TX,
 	DMA_SLAVE,
+	DMA_CYCLIC,
 };
 
 /* last transaction type for creation of the capabilities mask */
-#define DMA_TX_TYPE_END (DMA_SLAVE + 1)
+#define DMA_TX_TYPE_END (DMA_CYCLIC + 1)
 
 
 /**
@@ -119,12 +121,15 @@ enum dma_ctrl_flags {
  * configuration data in statically from the platform). An additional
  * argument of struct dma_slave_config must be passed in with this
  * command.
+ * @FSLDMA_EXTERNAL_START: this command will put the Freescale DMA controller
+ * into external start mode.
  */
 enum dma_ctrl_cmd {
 	DMA_TERMINATE_ALL,
 	DMA_PAUSE,
 	DMA_RESUME,
 	DMA_SLAVE_CONFIG,
+	FSLDMA_EXTERNAL_START,
 };
 
 /**
@@ -316,14 +321,14 @@ struct dma_async_tx_descriptor {
 	dma_cookie_t (*tx_submit)(struct dma_async_tx_descriptor *tx);
 	dma_async_tx_callback callback;
 	void *callback_param;
-#ifndef CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH
+#ifdef CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH
 	struct dma_async_tx_descriptor *next;
 	struct dma_async_tx_descriptor *parent;
 	spinlock_t lock;
 #endif
 };
 
-#ifdef CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH
+#ifndef CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH
 static inline void txd_lock(struct dma_async_tx_descriptor *txd)
 {
 }
@@ -422,6 +427,9 @@ struct dma_tx_state {
  * @device_prep_dma_memset: prepares a memset operation
  * @device_prep_dma_interrupt: prepares an end of chain interrupt operation
  * @device_prep_slave_sg: prepares a slave dma operation
+ * @device_prep_dma_cyclic: prepare a cyclic dma operation suitable for audio.
+ *	The function takes a buffer of size buf_len. The callback function will
+ *	be called after period_len bytes have been transferred.
  * @device_control: manipulate all pending operations on a channel, returns
  *	zero or error code
  * @device_tx_status: poll for transaction completion, the optional
@@ -473,11 +481,19 @@ struct dma_device {
 		unsigned long flags);
 	struct dma_async_tx_descriptor *(*device_prep_dma_interrupt)(
 		struct dma_chan *chan, unsigned long flags);
+	struct dma_async_tx_descriptor *(*device_prep_dma_sg)(
+		struct dma_chan *chan,
+		struct scatterlist *dst_sg, unsigned int dst_nents,
+		struct scatterlist *src_sg, unsigned int src_nents,
+		unsigned long flags);
 
 	struct dma_async_tx_descriptor *(*device_prep_slave_sg)(
 		struct dma_chan *chan, struct scatterlist *sgl,
 		unsigned int sg_len, enum dma_data_direction direction,
 		unsigned long flags);
+	struct dma_async_tx_descriptor *(*device_prep_dma_cyclic)(
+		struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
+		size_t period_len, enum dma_data_direction direction);
 	int (*device_control)(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
 		unsigned long arg);
 
@@ -487,6 +503,40 @@ struct dma_device {
 	void (*device_issue_pending)(struct dma_chan *chan);
 };
 
+static inline int dmaengine_device_control(struct dma_chan *chan,
+					   enum dma_ctrl_cmd cmd,
+					   unsigned long arg)
+{
+	return chan->device->device_control(chan, cmd, arg);
+}
+
+static inline int dmaengine_slave_config(struct dma_chan *chan,
+					  struct dma_slave_config *config)
+{
+	return dmaengine_device_control(chan, DMA_SLAVE_CONFIG,
+			(unsigned long)config);
+}
+
+static inline int dmaengine_terminate_all(struct dma_chan *chan)
+{
+	return dmaengine_device_control(chan, DMA_TERMINATE_ALL, 0);
+}
+
+static inline int dmaengine_pause(struct dma_chan *chan)
+{
+	return dmaengine_device_control(chan, DMA_PAUSE, 0);
+}
+
+static inline int dmaengine_resume(struct dma_chan *chan)
+{
+	return dmaengine_device_control(chan, DMA_RESUME, 0);
+}
+
+static inline int dmaengine_submit(struct dma_async_tx_descriptor *desc)
+{
+	return desc->tx_submit(desc);
+}
+
 static inline bool dmaengine_check_align(u8 align, size_t off1, size_t off2, size_t len)
 {
 	size_t mask;
@@ -606,11 +656,11 @@ static inline void net_dmaengine_put(void)
 #ifdef CONFIG_ASYNC_TX_DMA
 #define async_dmaengine_get()	dmaengine_get()
 #define async_dmaengine_put()	dmaengine_put()
-#ifdef CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH
+#ifndef CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH
 #define async_dma_find_channel(type) dma_find_channel(DMA_ASYNC_TX)
 #else
 #define async_dma_find_channel(type) dma_find_channel(type)
-#endif /* CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH */
+#endif /* CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH */
 #else
 static inline void async_dmaengine_get(void)
 {
diff --git a/include/linux/intel_mid_dma.h b/include/linux/intel_mid_dma.h
index d9d08b6269b6..10496bd24c5c 100644
--- a/include/linux/intel_mid_dma.h
+++ b/include/linux/intel_mid_dma.h
@@ -27,14 +27,7 @@
 
 #include <linux/dmaengine.h>
 
-/*DMA transaction width, src and dstn width would be same
-The DMA length must be width aligned,
-for 32 bit width the length must be 32 bit (4bytes) aligned only*/
-enum intel_mid_dma_width {
-	LNW_DMA_WIDTH_8BIT = 0x0,
-	LNW_DMA_WIDTH_16BIT = 0x1,
-	LNW_DMA_WIDTH_32BIT = 0x2,
-};
+#define DMA_PREP_CIRCULAR_LIST		(1 << 10)
 
 /*DMA mode configurations*/
 enum intel_mid_dma_mode {
@@ -69,18 +62,15 @@ enum intel_mid_dma_msize {
  * @cfg_mode: DMA data transfer mode (per-per/mem-per/mem-mem)
  * @src_msize: Source DMA burst size
  * @dst_msize: Dst DMA burst size
+ * @per_addr: Periphral address
  * @device_instance: DMA peripheral device instance, we can have multiple
  *		peripheral device connected to single DMAC
  */
 struct intel_mid_dma_slave {
-	enum dma_data_direction		dirn;
-	enum intel_mid_dma_width	src_width; /*width of DMA src txn*/
-	enum intel_mid_dma_width	dst_width; /*width of DMA dst txn*/
 	enum intel_mid_dma_hs_mode	hs_mode;  /*handshaking*/
 	enum intel_mid_dma_mode		cfg_mode; /*mode configuration*/
-	enum intel_mid_dma_msize	src_msize; /*size if src burst*/
-	enum intel_mid_dma_msize	dst_msize; /*size of dst burst*/
 	unsigned int		device_instance; /*0, 1 for periphral instance*/
+	struct dma_slave_config		dma_slave;
 };
 
 #endif /*__INTEL_MID_DMA_H__*/