x86, ACPI, mm: Revert movablemem_map support

Tim found:

  WARNING: at arch/x86/kernel/smpboot.c:324 topology_sane.isra.2+0x6f/0x80()
  Hardware name: S2600CP
  sched: CPU #1's llc-sibling CPU #0 is not on the same node! [node: 1 != 0]. Ignoring dependency.
  smpboot: Booting Node   1, Processors  #1
  Modules linked in:
  Pid: 0, comm: swapper/1 Not tainted 3.9.0-0-generic #1
  Call Trace:
    set_cpu_sibling_map+0x279/0x449
    start_secondary+0x11d/0x1e5

Don Morris reproduced on a HP z620 workstation, and bisected it to
commit e8d195525809 ("acpi, memory-hotplug: parse SRAT before memblock
is ready")

It turns out movable_map has some problems, and it breaks several things

1. numa_init is called several times, NOT just for srat. so those
	nodes_clear(numa_nodes_parsed)
	memset(&numa_meminfo, 0, sizeof(numa_meminfo))
   can not be just removed.  Need to consider sequence is: numaq, srat, amd, dummy.
   and make fall back path working.

2. simply split acpi_numa_init to early_parse_srat.
   a. that early_parse_srat is NOT called for ia64, so you break ia64.
   b.  for (i = 0; i < MAX_LOCAL_APIC; i++)
	     set_apicid_to_node(i, NUMA_NO_NODE)
     still left in numa_init. So it will just clear result from early_parse_srat.
     it should be moved before that....
   c.  it breaks ACPI_TABLE_OVERIDE...as the acpi table scan is moved
       early before override from INITRD is settled.

3. that patch TITLE is total misleading, there is NO x86 in the title,
   but it changes critical x86 code. It caused x86 guys did not
   pay attention to find the problem early. Those patches really should
   be routed via tip/x86/mm.

4. after that commit, following range can not use movable ram:
  a. real_mode code.... well..funny, legacy Node0 [0,1M) could be hot-removed?
  b. initrd... it will be freed after booting, so it could be on movable...
  c. crashkernel for kdump...: looks like we can not put kdump kernel above 4G
	anymore.
  d. init_mem_mapping: can not put page table high anymore.
  e. initmem_init: vmemmap can not be high local node anymore. That is
     not good.

If node is hotplugable, the mem related range like page table and
vmemmap could be on the that node without problem and should be on that
node.

We have workaround patch that could fix some problems, but some can not
be fixed.

So just remove that offending commit and related ones including:

 f7210e6c4ac7 ("mm/memblock.c: use CONFIG_HAVE_MEMBLOCK_NODE_MAP to
    protect movablecore_map in memblock_overlaps_region().")

 01a178a94e8e ("acpi, memory-hotplug: support getting hotplug info from
    SRAT")

 27168d38fa20 ("acpi, memory-hotplug: extend movablemem_map ranges to
    the end of node")

 e8d195525809 ("acpi, memory-hotplug: parse SRAT before memblock is
    ready")

 fb06bc8e5f42 ("page_alloc: bootmem limit with movablecore_map")

 42f47e27e761 ("page_alloc: make movablemem_map have higher priority")

 6981ec31146c ("page_alloc: introduce zone_movable_limit[] to keep
    movable limit for nodes")

 34b71f1e04fc ("page_alloc: add movable_memmap kernel parameter")

 4d59a75125d5 ("x86: get pg_data_t's memory from other node")

Later we should have patches that will make sure kernel put page table
and vmemmap on local node ram instead of push them down to node0.  Also
need to find way to put other kernel used ram to local node ram.

Reported-by: Tim Gardner <tim.gardner@canonical.com>
Reported-by: Don Morris <don.morris@hp.com>
Bisected-by: Don Morris <don.morris@hp.com>
Tested-by: Don Morris <don.morris@hp.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 5 insertions, 280 deletions

diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 0dade3f18f7d..8fcced7823fa 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -202,18 +202,11 @@ static unsigned long __meminitdata nr_all_pages;
 static unsigned long __meminitdata dma_reserve;
 
 #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
-/* Movable memory ranges, will also be used by memblock subsystem. */
-struct movablemem_map movablemem_map = {
-	.acpi = false,
-	.nr_map = 0,
-};
-
 static unsigned long __meminitdata arch_zone_lowest_possible_pfn[MAX_NR_ZONES];
 static unsigned long __meminitdata arch_zone_highest_possible_pfn[MAX_NR_ZONES];
 static unsigned long __initdata required_kernelcore;
 static unsigned long __initdata required_movablecore;
 static unsigned long __meminitdata zone_movable_pfn[MAX_NUMNODES];
-static unsigned long __meminitdata zone_movable_limit[MAX_NUMNODES];
 
 /* movable_zone is the "real" zone pages in ZONE_MOVABLE are taken from */
 int movable_zone;
@@ -4412,77 +4405,6 @@ static unsigned long __meminit zone_absent_pages_in_node(int nid,
 	return __absent_pages_in_range(nid, zone_start_pfn, zone_end_pfn);
 }
 
-/**
- * sanitize_zone_movable_limit - Sanitize the zone_movable_limit array.
- *
- * zone_movable_limit is initialized as 0. This function will try to get
- * the first ZONE_MOVABLE pfn of each node from movablemem_map, and
- * assigne them to zone_movable_limit.
- * zone_movable_limit[nid] == 0 means no limit for the node.
- *
- * Note: Each range is represented as [start_pfn, end_pfn)
- */
-static void __meminit sanitize_zone_movable_limit(void)
-{
-	int map_pos = 0, i, nid;
-	unsigned long start_pfn, end_pfn;
-
-	if (!movablemem_map.nr_map)
-		return;
-
-	/* Iterate all ranges from minimum to maximum */
-	for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn, &nid) {
-		/*
-		 * If we have found lowest pfn of ZONE_MOVABLE of the node
-		 * specified by user, just go on to check next range.
-		 */
-		if (zone_movable_limit[nid])
-			continue;
-
-#ifdef CONFIG_ZONE_DMA
-		/* Skip DMA memory. */
-		if (start_pfn < arch_zone_highest_possible_pfn[ZONE_DMA])
-			start_pfn = arch_zone_highest_possible_pfn[ZONE_DMA];
-#endif
-
-#ifdef CONFIG_ZONE_DMA32
-		/* Skip DMA32 memory. */
-		if (start_pfn < arch_zone_highest_possible_pfn[ZONE_DMA32])
-			start_pfn = arch_zone_highest_possible_pfn[ZONE_DMA32];
-#endif
-
-#ifdef CONFIG_HIGHMEM
-		/* Skip lowmem if ZONE_MOVABLE is highmem. */
-		if (zone_movable_is_highmem() &&
-		    start_pfn < arch_zone_lowest_possible_pfn[ZONE_HIGHMEM])
-			start_pfn = arch_zone_lowest_possible_pfn[ZONE_HIGHMEM];
-#endif
-
-		if (start_pfn >= end_pfn)
-			continue;
-
-		while (map_pos < movablemem_map.nr_map) {
-			if (end_pfn <= movablemem_map.map[map_pos].start_pfn)
-				break;
-
-			if (start_pfn >= movablemem_map.map[map_pos].end_pfn) {
-				map_pos++;
-				continue;
-			}
-
-			/*
-			 * The start_pfn of ZONE_MOVABLE is either the minimum
-			 * pfn specified by movablemem_map, or 0, which means
-			 * the node has no ZONE_MOVABLE.
-			 */
-			zone_movable_limit[nid] = max(start_pfn,
-					movablemem_map.map[map_pos].start_pfn);
-
-			break;
-		}
-	}
-}
-
 #else /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
 static inline unsigned long __meminit zone_spanned_pages_in_node(int nid,
 					unsigned long zone_type,
@@ -4500,6 +4422,7 @@ static inline unsigned long __meminit zone_absent_pages_in_node(int nid,
 
 	return zholes_size[zone_type];
 }
+
 #endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
 
 static void __meminit calculate_node_totalpages(struct pglist_data *pgdat,
@@ -4941,19 +4864,12 @@ static void __init find_zone_movable_pfns_for_nodes(void)
 		required_kernelcore = max(required_kernelcore, corepages);
 	}
 
-	/*
-	 * If neither kernelcore/movablecore nor movablemem_map is specified,
-	 * there is no ZONE_MOVABLE. But if movablemem_map is specified, the
-	 * start pfn of ZONE_MOVABLE has been stored in zone_movable_limit[].
-	 */
-	if (!required_kernelcore) {
-		if (movablemem_map.nr_map)
-			memcpy(zone_movable_pfn, zone_movable_limit,
-				sizeof(zone_movable_pfn));
+	/* If kernelcore was not specified, there is no ZONE_MOVABLE */
+	if (!required_kernelcore)
 		goto out;
-	}
 
 	/* usable_startpfn is the lowest possible pfn ZONE_MOVABLE can be at */
+	find_usable_zone_for_movable();
 	usable_startpfn = arch_zone_lowest_possible_pfn[movable_zone];
 
 restart:
@@ -4981,24 +4897,10 @@ restart:
 		for_each_mem_pfn_range(i, nid, &start_pfn, &end_pfn, NULL) {
 			unsigned long size_pages;
 
-			/*
-			 * Find more memory for kernelcore in
-			 * [zone_movable_pfn[nid], zone_movable_limit[nid]).
-			 */
 			start_pfn = max(start_pfn, zone_movable_pfn[nid]);
 			if (start_pfn >= end_pfn)
 				continue;
 
-			if (zone_movable_limit[nid]) {
-				end_pfn = min(end_pfn, zone_movable_limit[nid]);
-				/* No range left for kernelcore in this node */
-				if (start_pfn >= end_pfn) {
-					zone_movable_pfn[nid] =
-							zone_movable_limit[nid];
-					break;
-				}
-			}
-
 			/* Account for what is only usable for kernelcore */
 			if (start_pfn < usable_startpfn) {
 				unsigned long kernel_pages;
@@ -5058,12 +4960,12 @@ restart:
 	if (usable_nodes && required_kernelcore > usable_nodes)
 		goto restart;
 
-out:
 	/* Align start of ZONE_MOVABLE on all nids to MAX_ORDER_NR_PAGES */
 	for (nid = 0; nid < MAX_NUMNODES; nid++)
 		zone_movable_pfn[nid] =
 			roundup(zone_movable_pfn[nid], MAX_ORDER_NR_PAGES);
 
+out:
 	/* restore the node_state */
 	node_states[N_MEMORY] = saved_node_state;
 }
@@ -5126,8 +5028,6 @@ void __init free_area_init_nodes(unsigned long *max_zone_pfn)
 
 	/* Find the PFNs that ZONE_MOVABLE begins at in each node */
 	memset(zone_movable_pfn, 0, sizeof(zone_movable_pfn));
-	find_usable_zone_for_movable();
-	sanitize_zone_movable_limit();
 	find_zone_movable_pfns_for_nodes();
 
 	/* Print out the zone ranges */
@@ -5211,181 +5111,6 @@ static int __init cmdline_parse_movablecore(char *p)
 early_param("kernelcore", cmdline_parse_kernelcore);
 early_param("movablecore", cmdline_parse_movablecore);
 
-/**
- * movablemem_map_overlap() - Check if a range overlaps movablemem_map.map[].
- * @start_pfn:	start pfn of the range to be checked
- * @end_pfn: 	end pfn of the range to be checked (exclusive)
- *
- * This function checks if a given memory range [start_pfn, end_pfn) overlaps
- * the movablemem_map.map[] array.
- *
- * Return: index of the first overlapped element in movablemem_map.map[]
- *         or -1 if they don't overlap each other.
- */
-int __init movablemem_map_overlap(unsigned long start_pfn,
-				   unsigned long end_pfn)
-{
-	int overlap;
-
-	if (!movablemem_map.nr_map)
-		return -1;
-
-	for (overlap = 0; overlap < movablemem_map.nr_map; overlap++)
-		if (start_pfn < movablemem_map.map[overlap].end_pfn)
-			break;
-
-	if (overlap == movablemem_map.nr_map ||
-	    end_pfn <= movablemem_map.map[overlap].start_pfn)
-		return -1;
-
-	return overlap;
-}
-
-/**
- * insert_movablemem_map - Insert a memory range in to movablemem_map.map.
- * @start_pfn:	start pfn of the range
- * @end_pfn:	end pfn of the range
- *
- * This function will also merge the overlapped ranges, and sort the array
- * by start_pfn in monotonic increasing order.
- */
-void __init insert_movablemem_map(unsigned long start_pfn,
-				  unsigned long end_pfn)
-{
-	int pos, overlap;
-
-	/*
-	 * pos will be at the 1st overlapped range, or the position
-	 * where the element should be inserted.
-	 */
-	for (pos = 0; pos < movablemem_map.nr_map; pos++)
-		if (start_pfn <= movablemem_map.map[pos].end_pfn)
-			break;
-
-	/* If there is no overlapped range, just insert the element. */
-	if (pos == movablemem_map.nr_map ||
-	    end_pfn < movablemem_map.map[pos].start_pfn) {
-		/*
-		 * If pos is not the end of array, we need to move all
-		 * the rest elements backward.
-		 */
-		if (pos < movablemem_map.nr_map)
-			memmove(&movablemem_map.map[pos+1],
-				&movablemem_map.map[pos],
-				sizeof(struct movablemem_entry) *
-				(movablemem_map.nr_map - pos));
-		movablemem_map.map[pos].start_pfn = start_pfn;
-		movablemem_map.map[pos].end_pfn = end_pfn;
-		movablemem_map.nr_map++;
-		return;
-	}
-
-	/* overlap will be at the last overlapped range */
-	for (overlap = pos + 1; overlap < movablemem_map.nr_map; overlap++)
-		if (end_pfn < movablemem_map.map[overlap].start_pfn)
-			break;
-
-	/*
-	 * If there are more ranges overlapped, we need to merge them,
-	 * and move the rest elements forward.
-	 */
-	overlap--;
-	movablemem_map.map[pos].start_pfn = min(start_pfn,
-					movablemem_map.map[pos].start_pfn);
-	movablemem_map.map[pos].end_pfn = max(end_pfn,
-					movablemem_map.map[overlap].end_pfn);
-
-	if (pos != overlap && overlap + 1 != movablemem_map.nr_map)
-		memmove(&movablemem_map.map[pos+1],
-			&movablemem_map.map[overlap+1],
-			sizeof(struct movablemem_entry) *
-			(movablemem_map.nr_map - overlap - 1));
-
-	movablemem_map.nr_map -= overlap - pos;
-}
-
-/**
- * movablemem_map_add_region - Add a memory range into movablemem_map.
- * @start:	physical start address of range
- * @end:	physical end address of range
- *
- * This function transform the physical address into pfn, and then add the
- * range into movablemem_map by calling insert_movablemem_map().
- */
-static void __init movablemem_map_add_region(u64 start, u64 size)
-{
-	unsigned long start_pfn, end_pfn;
-
-	/* In case size == 0 or start + size overflows */
-	if (start + size <= start)
-		return;
-
-	if (movablemem_map.nr_map >= ARRAY_SIZE(movablemem_map.map)) {
-		pr_err("movablemem_map: too many entries;"
-			" ignoring [mem %#010llx-%#010llx]\n",
-			(unsigned long long) start,
-			(unsigned long long) (start + size - 1));
-		return;
-	}
-
-	start_pfn = PFN_DOWN(start);
-	end_pfn = PFN_UP(start + size);
-	insert_movablemem_map(start_pfn, end_pfn);
-}
-
-/*
- * cmdline_parse_movablemem_map - Parse boot option movablemem_map.
- * @p:	The boot option of the following format:
- *	movablemem_map=nn[KMG]@ss[KMG]
- *
- * This option sets the memory range [ss, ss+nn) to be used as movable memory.
- *
- * Return: 0 on success or -EINVAL on failure.
- */
-static int __init cmdline_parse_movablemem_map(char *p)
-{
-	char *oldp;
-	u64 start_at, mem_size;
-
-	if (!p)
-		goto err;
-
-	if (!strcmp(p, "acpi"))
-		movablemem_map.acpi = true;
-
-	/*
-	 * If user decide to use info from BIOS, all the other user specified
-	 * ranges will be ingored.
-	 */
-	if (movablemem_map.acpi) {
-		if (movablemem_map.nr_map) {
-			memset(movablemem_map.map, 0,
-				sizeof(struct movablemem_entry)
-				* movablemem_map.nr_map);
-			movablemem_map.nr_map = 0;
-		}
-		return 0;
-	}
-
-	oldp = p;
-	mem_size = memparse(p, &p);
-	if (p == oldp)
-		goto err;
-
-	if (*p == '@') {
-		oldp = ++p;
-		start_at = memparse(p, &p);
-		if (p == oldp || *p != '\0')
-			goto err;
-
-		movablemem_map_add_region(start_at, mem_size);
-		return 0;
-	}
-err:
-	return -EINVAL;
-}
-early_param("movablemem_map", cmdline_parse_movablemem_map);
-
 #endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
 
 /**