diff options
author | Pedro Garcia <pedro.netdev@dondevamos.com> | 2010-07-18 15:38:44 -0700 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2010-07-18 15:38:44 -0700 |
commit | ad1afb00393915a51c21b1ae8704562bf036855f (patch) | |
tree | 68ead91b78624a66f4aabb9699f4b414b914a762 /net/8021q/vlan_dev.c | |
parent | 01893c82b4e6949f4e3a453c4faea34970359d76 (diff) | |
download | linux-ad1afb00393915a51c21b1ae8704562bf036855f.tar.gz linux-ad1afb00393915a51c21b1ae8704562bf036855f.tar.bz2 linux-ad1afb00393915a51c21b1ae8704562bf036855f.zip |
vlan_dev: VLAN 0 should be treated as "no vlan tag" (802.1p packet)
- Without the 8021q module loaded in the kernel, all 802.1p packets
(VLAN 0 but QoS tagging) are silently discarded (as expected, as
the protocol is not loaded).
- Without this patch in 8021q module, these packets are forwarded to
the module, but they are discarded also if VLAN 0 is not configured,
which should not be the default behaviour, as VLAN 0 is not really
a VLANed packet but a 802.1p packet. Defining VLAN 0 makes it almost
impossible to communicate with mixed 802.1p and non 802.1p devices on
the same network due to arp table issues.
- Changed logic to skip vlan specific code in vlan_skb_recv if VLAN
is 0 and we have not defined a VLAN with ID 0, but we accept the
packet with the encapsulated proto and pass it later to netif_rx.
- In the vlan device event handler, added some logic to add VLAN 0
to HW filter in devices that support it (this prevented any traffic
in VLAN 0 to reach the stack in e1000e with HW filter under 2.6.35,
and probably also with other HW filtered cards, so we fix it here).
- In the vlan unregister logic, prevent the elimination of VLAN 0
in devices with HW filter.
- The default behaviour is to ignore the VLAN 0 tagging and accept
the packet as if it was not tagged, but we can still define a
VLAN 0 if desired (so it is backwards compatible).
Signed-off-by: Pedro Garcia <pedro.netdev@dondevamos.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'net/8021q/vlan_dev.c')
-rw-r--r-- | net/8021q/vlan_dev.c | 103 |
1 files changed, 60 insertions, 43 deletions
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c index 7cb285f96b99..3d59c9bf8feb 100644 --- a/net/8021q/vlan_dev.c +++ b/net/8021q/vlan_dev.c @@ -142,6 +142,7 @@ int vlan_skb_recv(struct sk_buff *skb, struct net_device *dev, { struct vlan_hdr *vhdr; struct vlan_rx_stats *rx_stats; + struct net_device *vlan_dev; u16 vlan_id; u16 vlan_tci; @@ -157,55 +158,71 @@ int vlan_skb_recv(struct sk_buff *skb, struct net_device *dev, vlan_id = vlan_tci & VLAN_VID_MASK; rcu_read_lock(); - skb->dev = __find_vlan_dev(dev, vlan_id); - if (!skb->dev) { - pr_debug("%s: ERROR: No net_device for VID: %u on dev: %s\n", - __func__, vlan_id, dev->name); - goto err_unlock; - } - - rx_stats = per_cpu_ptr(vlan_dev_info(skb->dev)->vlan_rx_stats, - smp_processor_id()); - u64_stats_update_begin(&rx_stats->syncp); - rx_stats->rx_packets++; - rx_stats->rx_bytes += skb->len; - - skb_pull_rcsum(skb, VLAN_HLEN); - - skb->priority = vlan_get_ingress_priority(skb->dev, vlan_tci); + vlan_dev = __find_vlan_dev(dev, vlan_id); - pr_debug("%s: priority: %u for TCI: %hu\n", - __func__, skb->priority, vlan_tci); - - switch (skb->pkt_type) { - case PACKET_BROADCAST: /* Yeah, stats collect these together.. */ - /* stats->broadcast ++; // no such counter :-( */ - break; - - case PACKET_MULTICAST: - rx_stats->rx_multicast++; - break; + /* If the VLAN device is defined, we use it. + * If not, and the VID is 0, it is a 802.1p packet (not + * really a VLAN), so we will just netif_rx it later to the + * original interface, but with the skb->proto set to the + * wrapped proto: we do nothing here. + */ - case PACKET_OTHERHOST: - /* Our lower layer thinks this is not local, let's make sure. - * This allows the VLAN to have a different MAC than the - * underlying device, and still route correctly. - */ - if (!compare_ether_addr(eth_hdr(skb)->h_dest, - skb->dev->dev_addr)) - skb->pkt_type = PACKET_HOST; - break; - default: - break; + if (!vlan_dev) { + if (vlan_id) { + pr_debug("%s: ERROR: No net_device for VID: %u on dev: %s\n", + __func__, vlan_id, dev->name); + goto err_unlock; + } + rx_stats = NULL; + } else { + skb->dev = vlan_dev; + + rx_stats = per_cpu_ptr(vlan_dev_info(skb->dev)->vlan_rx_stats, + smp_processor_id()); + u64_stats_update_begin(&rx_stats->syncp); + rx_stats->rx_packets++; + rx_stats->rx_bytes += skb->len; + + skb->priority = vlan_get_ingress_priority(skb->dev, vlan_tci); + + pr_debug("%s: priority: %u for TCI: %hu\n", + __func__, skb->priority, vlan_tci); + + switch (skb->pkt_type) { + case PACKET_BROADCAST: + /* Yeah, stats collect these together.. */ + /* stats->broadcast ++; // no such counter :-( */ + break; + + case PACKET_MULTICAST: + rx_stats->rx_multicast++; + break; + + case PACKET_OTHERHOST: + /* Our lower layer thinks this is not local, let's make + * sure. + * This allows the VLAN to have a different MAC than the + * underlying device, and still route correctly. + */ + if (!compare_ether_addr(eth_hdr(skb)->h_dest, + skb->dev->dev_addr)) + skb->pkt_type = PACKET_HOST; + break; + default: + break; + } + u64_stats_update_end(&rx_stats->syncp); } - u64_stats_update_end(&rx_stats->syncp); + skb_pull_rcsum(skb, VLAN_HLEN); vlan_set_encap_proto(skb, vhdr); - skb = vlan_check_reorder_header(skb); - if (!skb) { - rx_stats->rx_errors++; - goto err_unlock; + if (vlan_dev) { + skb = vlan_check_reorder_header(skb); + if (!skb) { + rx_stats->rx_errors++; + goto err_unlock; + } } netif_rx(skb); |