diff options
author | Vladimir Oltean <vladimir.oltean@nxp.com> | 2020-03-24 11:45:34 +0200 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2020-03-24 16:19:01 -0700 |
commit | e80f40cbe4dd51371818e967d40da8fe305db5e4 (patch) | |
tree | 5872b1405182b8c0df709455dda06a2c115c7b97 /net/dsa | |
parent | 961d0e5b32946703125964f9f5b6321d60f4d706 (diff) | |
download | linux-e80f40cbe4dd51371818e967d40da8fe305db5e4.tar.gz linux-e80f40cbe4dd51371818e967d40da8fe305db5e4.tar.bz2 linux-e80f40cbe4dd51371818e967d40da8fe305db5e4.zip |
net: dsa: tag_8021q: replace dsa_8021q_remove_header with __skb_vlan_pop
Not only did this wheel did not need reinventing, but there is also
an issue with it: It doesn't remove the VLAN header in a way that
preserves the L2 payload checksum when that is being provided by the DSA
master hw. It should recalculate checksum both for the push, before
removing the header, and for the pull afterwards. But the current
implementation is quite dizzying, with pulls followed immediately
afterwards by pushes, the memmove is done before the push, etc. This
makes a DSA master with RX checksumming offload to print stack traces
with the infamous 'hw csum failure' message.
So remove the dsa_8021q_remove_header function and replace it with
something that actually works with inet checksumming.
Fixes: d461933638ae ("net: dsa: tag_8021q: Create helper function for removing VLAN header")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'net/dsa')
-rw-r--r-- | net/dsa/tag_8021q.c | 43 | ||||
-rw-r--r-- | net/dsa/tag_sja1105.c | 19 |
2 files changed, 9 insertions, 53 deletions
diff --git a/net/dsa/tag_8021q.c b/net/dsa/tag_8021q.c index 2fb6c26294b5..b97ad93d1c1a 100644 --- a/net/dsa/tag_8021q.c +++ b/net/dsa/tag_8021q.c @@ -298,47 +298,4 @@ struct sk_buff *dsa_8021q_xmit(struct sk_buff *skb, struct net_device *netdev, } EXPORT_SYMBOL_GPL(dsa_8021q_xmit); -/* In the DSA packet_type handler, skb->data points in the middle of the VLAN - * tag, after tpid and before tci. This is because so far, ETH_HLEN - * (DMAC, SMAC, EtherType) bytes were pulled. - * There are 2 bytes of VLAN tag left in skb->data, and upper - * layers expect the 'real' EtherType to be consumed as well. - * Coincidentally, a VLAN header is also of the same size as - * the number of bytes that need to be pulled. - * - * skb_mac_header skb->data - * | | - * v v - * | | | | | | | | | | | | | | | | | | | - * +-----------------------+-----------------------+-------+-------+-------+ - * | Destination MAC | Source MAC | TPID | TCI | EType | - * +-----------------------+-----------------------+-------+-------+-------+ - * ^ | | - * |<--VLAN_HLEN-->to <---VLAN_HLEN---> - * from | - * >>>>>>> v - * >>>>>>> | | | | | | | | | | | | | | | - * >>>>>>> +-----------------------+-----------------------+-------+ - * >>>>>>> | Destination MAC | Source MAC | EType | - * +-----------------------+-----------------------+-------+ - * ^ ^ - * (now part of | | - * skb->head) skb_mac_header skb->data - */ -struct sk_buff *dsa_8021q_remove_header(struct sk_buff *skb) -{ - u8 *from = skb_mac_header(skb); - u8 *dest = from + VLAN_HLEN; - - memmove(dest, from, ETH_HLEN - VLAN_HLEN); - skb_pull(skb, VLAN_HLEN); - skb_push(skb, ETH_HLEN); - skb_reset_mac_header(skb); - skb_reset_mac_len(skb); - skb_pull_rcsum(skb, ETH_HLEN); - - return skb; -} -EXPORT_SYMBOL_GPL(dsa_8021q_remove_header); - MODULE_LICENSE("GPL v2"); diff --git a/net/dsa/tag_sja1105.c b/net/dsa/tag_sja1105.c index 5366ea430349..d553bf36bd41 100644 --- a/net/dsa/tag_sja1105.c +++ b/net/dsa/tag_sja1105.c @@ -250,14 +250,14 @@ static struct sk_buff *sja1105_rcv(struct sk_buff *skb, { struct sja1105_meta meta = {0}; int source_port, switch_id; - struct vlan_ethhdr *hdr; + struct ethhdr *hdr; u16 tpid, vid, tci; bool is_link_local; bool is_tagged; bool is_meta; - hdr = vlan_eth_hdr(skb); - tpid = ntohs(hdr->h_vlan_proto); + hdr = eth_hdr(skb); + tpid = ntohs(hdr->h_proto); is_tagged = (tpid == ETH_P_SJA1105); is_link_local = sja1105_is_link_local(skb); is_meta = sja1105_is_meta_frame(skb); @@ -266,7 +266,12 @@ static struct sk_buff *sja1105_rcv(struct sk_buff *skb, if (is_tagged) { /* Normal traffic path. */ - tci = ntohs(hdr->h_vlan_TCI); + skb_push_rcsum(skb, ETH_HLEN); + __skb_vlan_pop(skb, &tci); + skb_pull_rcsum(skb, ETH_HLEN); + skb_reset_network_header(skb); + skb_reset_transport_header(skb); + vid = tci & VLAN_VID_MASK; source_port = dsa_8021q_rx_source_port(vid); switch_id = dsa_8021q_rx_switch_id(vid); @@ -295,12 +300,6 @@ static struct sk_buff *sja1105_rcv(struct sk_buff *skb, return NULL; } - /* Delete/overwrite fake VLAN header, DSA expects to not find - * it there, see dsa_switch_rcv: skb_push(skb, ETH_HLEN). - */ - if (is_tagged) - skb = dsa_8021q_remove_header(skb); - return sja1105_rcv_meta_state_machine(skb, &meta, is_link_local, is_meta); } |