ALSA: hda - Split quirk codes from patch_realtek.c

Put the all static quirk codes out of patch_realtek.c, split into the
file for each codec model.  For controlling the build of quirk codes,
a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced.
By setting this off, all quirk codes won't be built, thus you can save
lots of memory.

The codes in patch_realtek.c are also shuffled and more comments are
given, but the contents aren't changed.  This is just a refactoring.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

1 files changed, 1272 insertions, 0 deletions

diff --git a/sound/pci/hda/alc260_quirks.c b/sound/pci/hda/alc260_quirks.c
new file mode 100644
index 000000000000..21ec2cb100b0
--- /dev/null
+++ b/sound/pci/hda/alc260_quirks.c
@@ -0,0 +1,1272 @@
+/*
+ * ALC260 quirk models
+ * included by patch_realtek.c
+ */
+
+/* ALC260 models */
+enum {
+	ALC260_AUTO,
+	ALC260_BASIC,
+	ALC260_HP,
+	ALC260_HP_DC7600,
+	ALC260_HP_3013,
+	ALC260_FUJITSU_S702X,
+	ALC260_ACER,
+	ALC260_WILL,
+	ALC260_REPLACER_672V,
+	ALC260_FAVORIT100,
+#ifdef CONFIG_SND_DEBUG
+	ALC260_TEST,
+#endif
+	ALC260_MODEL_LAST /* last tag */
+};
+
+static const hda_nid_t alc260_dac_nids[1] = {
+	/* front */
+	0x02,
+};
+
+static const hda_nid_t alc260_adc_nids[1] = {
+	/* ADC0 */
+	0x04,
+};
+
+static const hda_nid_t alc260_adc_nids_alt[1] = {
+	/* ADC1 */
+	0x05,
+};
+
+/* NIDs used when simultaneous access to both ADCs makes sense.  Note that
+ * alc260_capture_mixer assumes ADC0 (nid 0x04) is the first ADC.
+ */
+static const hda_nid_t alc260_dual_adc_nids[2] = {
+	/* ADC0, ADC1 */
+	0x04, 0x05
+};
+
+#define ALC260_DIGOUT_NID	0x03
+#define ALC260_DIGIN_NID	0x06
+
+static const struct hda_input_mux alc260_capture_source = {
+	.num_items = 4,
+	.items = {
+		{ "Mic", 0x0 },
+		{ "Front Mic", 0x1 },
+		{ "Line", 0x2 },
+		{ "CD", 0x4 },
+	},
+};
+
+/* On Fujitsu S702x laptops capture only makes sense from Mic/LineIn jack,
+ * headphone jack and the internal CD lines since these are the only pins at
+ * which audio can appear.  For flexibility, also allow the option of
+ * recording the mixer output on the second ADC (ADC0 doesn't have a
+ * connection to the mixer output).
+ */
+static const struct hda_input_mux alc260_fujitsu_capture_sources[2] = {
+	{
+		.num_items = 3,
+		.items = {
+			{ "Mic/Line", 0x0 },
+			{ "CD", 0x4 },
+			{ "Headphone", 0x2 },
+		},
+	},
+	{
+		.num_items = 4,
+		.items = {
+			{ "Mic/Line", 0x0 },
+			{ "CD", 0x4 },
+			{ "Headphone", 0x2 },
+			{ "Mixer", 0x5 },
+		},
+	},
+
+};
+
+/* Acer TravelMate(/Extensa/Aspire) notebooks have similar configuration to
+ * the Fujitsu S702x, but jacks are marked differently.
+ */
+static const struct hda_input_mux alc260_acer_capture_sources[2] = {
+	{
+		.num_items = 4,
+		.items = {
+			{ "Mic", 0x0 },
+			{ "Line", 0x2 },
+			{ "CD", 0x4 },
+			{ "Headphone", 0x5 },
+		},
+	},
+	{
+		.num_items = 5,
+		.items = {
+			{ "Mic", 0x0 },
+			{ "Line", 0x2 },
+			{ "CD", 0x4 },
+			{ "Headphone", 0x6 },
+			{ "Mixer", 0x5 },
+		},
+	},
+};
+
+/* Maxdata Favorit 100XS */
+static const struct hda_input_mux alc260_favorit100_capture_sources[2] = {
+	{
+		.num_items = 2,
+		.items = {
+			{ "Line/Mic", 0x0 },
+			{ "CD", 0x4 },
+		},
+	},
+	{
+		.num_items = 3,
+		.items = {
+			{ "Line/Mic", 0x0 },
+			{ "CD", 0x4 },
+			{ "Mixer", 0x5 },
+		},
+	},
+};
+
+/*
+ * This is just place-holder, so there's something for alc_build_pcms to look
+ * at when it calculates the maximum number of channels. ALC260 has no mixer
+ * element which allows changing the channel mode, so the verb list is
+ * never used.
+ */
+static const struct hda_channel_mode alc260_modes[1] = {
+	{ 2, NULL },
+};
+
+
+/* Mixer combinations
+ *
+ * basic: base_output + input + pc_beep + capture
+ * HP: base_output + input + capture_alt
+ * HP_3013: hp_3013 + input + capture
+ * fujitsu: fujitsu + capture
+ * acer: acer + capture
+ */
+
+static const struct snd_kcontrol_new alc260_base_output_mixer[] = {
+	HDA_CODEC_VOLUME("Front Playback Volume", 0x08, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE("Front Playback Switch", 0x08, 2, HDA_INPUT),
+	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x09, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE("Headphone Playback Switch", 0x09, 2, HDA_INPUT),
+	HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT),
+	{ } /* end */
+};
+
+static const struct snd_kcontrol_new alc260_input_mixer[] = {
+	HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
+	HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
+	HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
+	HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x07, 0x01, HDA_INPUT),
+	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x07, 0x01, HDA_INPUT),
+	{ } /* end */
+};
+
+/* update HP, line and mono out pins according to the master switch */
+static void alc260_hp_master_update(struct hda_codec *codec)
+{
+	update_speakers(codec);
+}
+
+static int alc260_hp_master_sw_get(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct alc_spec *spec = codec->spec;
+	*ucontrol->value.integer.value = !spec->master_mute;
+	return 0;
+}
+
+static int alc260_hp_master_sw_put(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct alc_spec *spec = codec->spec;
+	int val = !*ucontrol->value.integer.value;
+
+	if (val == spec->master_mute)
+		return 0;
+	spec->master_mute = val;
+	alc260_hp_master_update(codec);
+	return 1;
+}
+
+static const struct snd_kcontrol_new alc260_hp_output_mixer[] = {
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Master Playback Switch",
+		.subdevice = HDA_SUBDEV_NID_FLAG | 0x11,
+		.info = snd_ctl_boolean_mono_info,
+		.get = alc260_hp_master_sw_get,
+		.put = alc260_hp_master_sw_put,
+	},
+	HDA_CODEC_VOLUME("Front Playback Volume", 0x08, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE("Front Playback Switch", 0x08, 2, HDA_INPUT),
+	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x09, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE("Headphone Playback Switch", 0x09, 2, HDA_INPUT),
+	HDA_CODEC_VOLUME_MONO("Speaker Playback Volume", 0x0a, 1, 0x0,
+			      HDA_OUTPUT),
+	HDA_BIND_MUTE_MONO("Speaker Playback Switch", 0x0a, 1, 2, HDA_INPUT),
+	{ } /* end */
+};
+
+static const struct hda_verb alc260_hp_unsol_verbs[] = {
+	{0x10, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
+	{},
+};
+
+static void alc260_hp_setup(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x0f;
+	spec->autocfg.speaker_pins[0] = 0x10;
+	spec->autocfg.speaker_pins[1] = 0x11;
+	spec->automute = 1;
+	spec->automute_mode = ALC_AUTOMUTE_PIN;
+}
+
+static const struct snd_kcontrol_new alc260_hp_3013_mixer[] = {
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Master Playback Switch",
+		.subdevice = HDA_SUBDEV_NID_FLAG | 0x11,
+		.info = snd_ctl_boolean_mono_info,
+		.get = alc260_hp_master_sw_get,
+		.put = alc260_hp_master_sw_put,
+	},
+	HDA_CODEC_VOLUME("Front Playback Volume", 0x09, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Front Playback Switch", 0x10, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("Aux-In Playback Volume", 0x07, 0x06, HDA_INPUT),
+	HDA_CODEC_MUTE("Aux-In Playback Switch", 0x07, 0x06, HDA_INPUT),
+	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x08, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME_MONO("Speaker Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE_MONO("Speaker Playback Switch", 0x11, 1, 0x0, HDA_OUTPUT),
+	{ } /* end */
+};
+
+static void alc260_hp_3013_setup(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x10;
+	spec->autocfg.speaker_pins[1] = 0x11;
+	spec->automute = 1;
+	spec->automute_mode = ALC_AUTOMUTE_PIN;
+}
+
+static const struct hda_bind_ctls alc260_dc7600_bind_master_vol = {
+	.ops = &snd_hda_bind_vol,
+	.values = {
+		HDA_COMPOSE_AMP_VAL(0x08, 3, 0, HDA_OUTPUT),
+		HDA_COMPOSE_AMP_VAL(0x09, 3, 0, HDA_OUTPUT),
+		HDA_COMPOSE_AMP_VAL(0x0a, 3, 0, HDA_OUTPUT),
+		0
+	},
+};
+
+static const struct hda_bind_ctls alc260_dc7600_bind_switch = {
+	.ops = &snd_hda_bind_sw,
+	.values = {
+		HDA_COMPOSE_AMP_VAL(0x11, 3, 0, HDA_OUTPUT),
+		HDA_COMPOSE_AMP_VAL(0x15, 3, 0, HDA_OUTPUT),
+		0
+	},
+};
+
+static const struct snd_kcontrol_new alc260_hp_dc7600_mixer[] = {
+	HDA_BIND_VOL("Master Playback Volume", &alc260_dc7600_bind_master_vol),
+	HDA_BIND_SW("LineOut Playback Switch", &alc260_dc7600_bind_switch),
+	HDA_CODEC_MUTE("Speaker Playback Switch", 0x0f, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Headphone Playback Switch", 0x10, 0x0, HDA_OUTPUT),
+	{ } /* end */
+};
+
+static const struct hda_verb alc260_hp_3013_unsol_verbs[] = {
+	{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
+	{},
+};
+
+static void alc260_hp_3012_setup(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x10;
+	spec->autocfg.speaker_pins[0] = 0x0f;
+	spec->autocfg.speaker_pins[1] = 0x11;
+	spec->autocfg.speaker_pins[2] = 0x15;
+	spec->automute = 1;
+	spec->automute_mode = ALC_AUTOMUTE_PIN;
+}
+
+/* Fujitsu S702x series laptops.  ALC260 pin usage: Mic/Line jack = 0x12,
+ * HP jack = 0x14, CD audio =  0x16, internal speaker = 0x10.
+ */
+static const struct snd_kcontrol_new alc260_fujitsu_mixer[] = {
+	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x08, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE("Headphone Playback Switch", 0x08, 2, HDA_INPUT),
+	ALC_PIN_MODE("Headphone Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
+	HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
+	HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic/Line Playback Volume", 0x07, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Mic/Line Playback Switch", 0x07, 0x0, HDA_INPUT),
+	ALC_PIN_MODE("Mic/Line Jack Mode", 0x12, ALC_PIN_DIR_IN),
+	HDA_CODEC_VOLUME("Speaker Playback Volume", 0x09, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE("Speaker Playback Switch", 0x09, 2, HDA_INPUT),
+	{ } /* end */
+};
+
+/* Mixer for Acer TravelMate(/Extensa/Aspire) notebooks.  Note that current
+ * versions of the ALC260 don't act on requests to enable mic bias from NID
+ * 0x0f (used to drive the headphone jack in these laptops).  The ALC260
+ * datasheet doesn't mention this restriction.  At this stage it's not clear
+ * whether this behaviour is intentional or is a hardware bug in chip
+ * revisions available in early 2006.  Therefore for now allow the
+ * "Headphone Jack Mode" control to span all choices, but if it turns out
+ * that the lack of mic bias for this NID is intentional we could change the
+ * mode from ALC_PIN_DIR_INOUT to ALC_PIN_DIR_INOUT_NOMICBIAS.
+ *
+ * In addition, Acer TravelMate(/Extensa/Aspire) notebooks in early 2006
+ * don't appear to make the mic bias available from the "line" jack, even
+ * though the NID used for this jack (0x14) can supply it.  The theory is
+ * that perhaps Acer have included blocking capacitors between the ALC260
+ * and the output jack.  If this turns out to be the case for all such
+ * models the "Line Jack Mode" mode could be changed from ALC_PIN_DIR_INOUT
+ * to ALC_PIN_DIR_INOUT_NOMICBIAS.
+ *
+ * The C20x Tablet series have a mono internal speaker which is controlled
+ * via the chip's Mono sum widget and pin complex, so include the necessary
+ * controls for such models.  On models without a "mono speaker" the control
+ * won't do anything.
+ */
+static const struct snd_kcontrol_new alc260_acer_mixer[] = {
+	HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE("Master Playback Switch", 0x08, 2, HDA_INPUT),
+	ALC_PIN_MODE("Headphone Jack Mode", 0x0f, ALC_PIN_DIR_INOUT),
+	HDA_CODEC_VOLUME_MONO("Speaker Playback Volume", 0x0a, 1, 0x0,
+			      HDA_OUTPUT),
+	HDA_BIND_MUTE_MONO("Speaker Playback Switch", 0x0a, 1, 2,
+			   HDA_INPUT),
+	HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
+	HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
+	ALC_PIN_MODE("Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
+	HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
+	HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
+	ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
+	{ } /* end */
+};
+
+/* Maxdata Favorit 100XS: one output and one input (0x12) jack
+ */
+static const struct snd_kcontrol_new alc260_favorit100_mixer[] = {
+	HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE("Master Playback Switch", 0x08, 2, HDA_INPUT),
+	ALC_PIN_MODE("Output Jack Mode", 0x0f, ALC_PIN_DIR_INOUT),
+	HDA_CODEC_VOLUME("Line/Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Line/Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
+	ALC_PIN_MODE("Line/Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
+	{ } /* end */
+};
+
+/* Packard bell V7900  ALC260 pin usage: HP = 0x0f, Mic jack = 0x12,
+ * Line In jack = 0x14, CD audio =  0x16, pc beep = 0x17.
+ */
+static const struct snd_kcontrol_new alc260_will_mixer[] = {
+	HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE("Master Playback Switch", 0x08, 0x2, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
+	ALC_PIN_MODE("Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
+	HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
+	HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
+	ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
+	HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
+	HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
+	{ } /* end */
+};
+
+/* Replacer 672V ALC260 pin usage: Mic jack = 0x12,
+ * Line In jack = 0x14, ATAPI Mic = 0x13, speaker = 0x0f.
+ */
+static const struct snd_kcontrol_new alc260_replacer_672v_mixer[] = {
+	HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE("Master Playback Switch", 0x08, 0x2, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
+	ALC_PIN_MODE("Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
+	HDA_CODEC_VOLUME("ATAPI Mic Playback Volume", 0x07, 0x1, HDA_INPUT),
+	HDA_CODEC_MUTE("ATATI Mic Playback Switch", 0x07, 0x1, HDA_INPUT),
+	HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
+	HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
+	ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
+	{ } /* end */
+};
+
+/*
+ * initialization verbs
+ */
+static const struct hda_verb alc260_init_verbs[] = {
+	/* Line In pin widget for input */
+	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	/* CD pin widget for input */
+	{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	/* Mic1 (rear panel) pin widget for input and vref at 80% */
+	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+	/* Mic2 (front panel) pin widget for input and vref at 80% */
+	{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+	/* LINE-2 is used for line-out in rear */
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	/* select line-out */
+	{0x0e, AC_VERB_SET_CONNECT_SEL, 0x00},
+	/* LINE-OUT pin */
+	{0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	/* enable HP */
+	{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+	/* enable Mono */
+	{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	/* mute capture amp left and right */
+	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	/* set connection select to line in (default select for this ADC) */
+	{0x04, AC_VERB_SET_CONNECT_SEL, 0x02},
+	/* mute capture amp left and right */
+	{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	/* set connection select to line in (default select for this ADC) */
+	{0x05, AC_VERB_SET_CONNECT_SEL, 0x02},
+	/* set vol=0 Line-Out mixer amp left and right */
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+	/* unmute pin widget amp left and right (no gain on this amp) */
+	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	/* set vol=0 HP mixer amp left and right */
+	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+	/* unmute pin widget amp left and right (no gain on this amp) */
+	{0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	/* set vol=0 Mono mixer amp left and right */
+	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+	/* unmute pin widget amp left and right (no gain on this amp) */
+	{0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	/* unmute LINE-2 out pin */
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	/* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 &
+	 * Line In 2 = 0x03
+	 */
+	/* mute analog inputs */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+	/* Amp Indexes: DAC = 0x01 & mixer = 0x00 */
+	/* mute Front out path */
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	/* mute Headphone out path */
+	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	/* mute Mono out path */
+	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{ }
+};
+
+#if 0 /* should be identical with alc260_init_verbs? */
+static const struct hda_verb alc260_hp_init_verbs[] = {
+	/* Headphone and output */
+	{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0},
+	/* mono output */
+	{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
+	/* Mic1 (rear panel) pin widget for input and vref at 80% */
+	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
+	/* Mic2 (front panel) pin widget for input and vref at 80% */
+	{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
+	/* Line In pin widget for input */
+	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
+	/* Line-2 pin widget for output */
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
+	/* CD pin widget for input */
+	{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
+	/* unmute amp left and right */
+	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
+	/* set connection select to line in (default select for this ADC) */
+	{0x04, AC_VERB_SET_CONNECT_SEL, 0x02},
+	/* unmute Line-Out mixer amp left and right (volume = 0) */
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
+	/* mute pin widget amp left and right (no gain on this amp) */
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
+	/* unmute HP mixer amp left and right (volume = 0) */
+	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
+	/* mute pin widget amp left and right (no gain on this amp) */
+	{0x10, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
+	/* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 &
+	 * Line In 2 = 0x03
+	 */
+	/* mute analog inputs */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+	/* Amp Indexes: DAC = 0x01 & mixer = 0x00 */
+	/* Unmute Front out path */
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
+	/* Unmute Headphone out path */
+	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
+	/* Unmute Mono out path */
+	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
+	{ }
+};
+#endif
+
+static const struct hda_verb alc260_hp_3013_init_verbs[] = {
+	/* Line out and output */
+	{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
+	/* mono output */
+	{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
+	/* Mic1 (rear panel) pin widget for input and vref at 80% */
+	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
+	/* Mic2 (front panel) pin widget for input and vref at 80% */
+	{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
+	/* Line In pin widget for input */
+	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
+	/* Headphone pin widget for output */
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0},
+	/* CD pin widget for input */
+	{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
+	/* unmute amp left and right */
+	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
+	/* set connection select to line in (default select for this ADC) */
+	{0x04, AC_VERB_SET_CONNECT_SEL, 0x02},
+	/* unmute Line-Out mixer amp left and right (volume = 0) */
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
+	/* mute pin widget amp left and right (no gain on this amp) */
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
+	/* unmute HP mixer amp left and right (volume = 0) */
+	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
+	/* mute pin widget amp left and right (no gain on this amp) */
+	{0x10, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
+	/* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 &
+	 * Line In 2 = 0x03
+	 */
+	/* mute analog inputs */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+	/* Amp Indexes: DAC = 0x01 & mixer = 0x00 */
+	/* Unmute Front out path */
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
+	/* Unmute Headphone out path */
+	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
+	/* Unmute Mono out path */
+	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
+	{ }
+};
+
+/* Initialisation sequence for ALC260 as configured in Fujitsu S702x
+ * laptops.  ALC260 pin usage: Mic/Line jack = 0x12, HP jack = 0x14, CD
+ * audio = 0x16, internal speaker = 0x10.
+ */
+static const struct hda_verb alc260_fujitsu_init_verbs[] = {
+	/* Disable all GPIOs */
+	{0x01, AC_VERB_SET_GPIO_MASK, 0},
+	/* Internal speaker is connected to headphone pin */
+	{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+	/* Headphone/Line-out jack connects to Line1 pin; make it an output */
+	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	/* Mic/Line-in jack is connected to mic1 pin, so make it an input */
+	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	/* Ensure all other unused pins are disabled and muted. */
+	{0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+	{0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+	{0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+
+	/* Disable digital (SPDIF) pins */
+	{0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
+	{0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
+
+	/* Ensure Line1 pin widget takes its input from the OUT1 sum bus
+	 * when acting as an output.
+	 */
+	{0x0d, AC_VERB_SET_CONNECT_SEL, 0},
+
+	/* Start with output sum widgets muted and their output gains at min */
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+
+	/* Unmute HP pin widget amp left and right (no equiv mixer ctrl) */
+	{0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	/* Unmute Line1 pin widget output buffer since it starts as an output.
+	 * If the pin mode is changed by the user the pin mode control will
+	 * take care of enabling the pin's input/output buffers as needed.
+	 * Therefore there's no need to enable the input buffer at this
+	 * stage.
+	 */
+	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	/* Unmute input buffer of pin widget used for Line-in (no equiv
+	 * mixer ctrl)
+	 */
+	{0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+
+	/* Mute capture amp left and right */
+	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	/* Set ADC connection select to match default mixer setting - line
+	 * in (on mic1 pin)
+	 */
+	{0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
+
+	/* Do the same for the second ADC: mute capture input amp and
+	 * set ADC connection to line in (on mic1 pin)
+	 */
+	{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
+
+	/* Mute all inputs to mixer widget (even unconnected ones) */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */
+
+	{ }
+};
+
+/* Initialisation sequence for ALC260 as configured in Acer TravelMate and
+ * similar laptops (adapted from Fujitsu init verbs).
+ */
+static const struct hda_verb alc260_acer_init_verbs[] = {
+	/* On TravelMate laptops, GPIO 0 enables the internal speaker and
+	 * the headphone jack.  Turn this on and rely on the standard mute
+	 * methods whenever the user wants to turn these outputs off.
+	 */
+	{0x01, AC_VERB_SET_GPIO_MASK, 0x01},
+	{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
+	{0x01, AC_VERB_SET_GPIO_DATA, 0x01},
+	/* Internal speaker/Headphone jack is connected to Line-out pin */
+	{0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+	/* Internal microphone/Mic jack is connected to Mic1 pin */
+	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50},
+	/* Line In jack is connected to Line1 pin */
+	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	/* Some Acers (eg: C20x Tablets) use Mono pin for internal speaker */
+	{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+	/* Ensure all other unused pins are disabled and muted. */
+	{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+	{0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+	{0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	/* Disable digital (SPDIF) pins */
+	{0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
+	{0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
+
+	/* Ensure Mic1 and Line1 pin widgets take input from the OUT1 sum
+	 * bus when acting as outputs.
+	 */
+	{0x0b, AC_VERB_SET_CONNECT_SEL, 0},
+	{0x0d, AC_VERB_SET_CONNECT_SEL, 0},
+
+	/* Start with output sum widgets muted and their output gains at min */
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+
+	/* Unmute Line-out pin widget amp left and right
+	 * (no equiv mixer ctrl)
+	 */
+	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	/* Unmute mono pin widget amp output (no equiv mixer ctrl) */
+	{0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	/* Unmute Mic1 and Line1 pin widget input buffers since they start as
+	 * inputs. If the pin mode is changed by the user the pin mode control
+	 * will take care of enabling the pin's input/output buffers as needed.
+	 * Therefore there's no need to enable the input buffer at this
+	 * stage.
+	 */
+	{0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+
+	/* Mute capture amp left and right */
+	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	/* Set ADC connection select to match default mixer setting - mic
+	 * (on mic1 pin)
+	 */
+	{0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
+
+	/* Do similar with the second ADC: mute capture input amp and
+	 * set ADC connection to mic to match ALSA's default state.
+	 */
+	{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
+
+	/* Mute all inputs to mixer widget (even unconnected ones) */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */
+
+	{ }
+};
+
+/* Initialisation sequence for Maxdata Favorit 100XS
+ * (adapted from Acer init verbs).
+ */
+static const struct hda_verb alc260_favorit100_init_verbs[] = {
+	/* GPIO 0 enables the output jack.
+	 * Turn this on and rely on the standard mute
+	 * methods whenever the user wants to turn these outputs off.
+	 */
+	{0x01, AC_VERB_SET_GPIO_MASK, 0x01},
+	{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
+	{0x01, AC_VERB_SET_GPIO_DATA, 0x01},
+	/* Line/Mic input jack is connected to Mic1 pin */
+	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50},
+	/* Ensure all other unused pins are disabled and muted. */
+	{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+	{0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+	{0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+	{0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	/* Disable digital (SPDIF) pins */
+	{0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
+	{0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
+
+	/* Ensure Mic1 and Line1 pin widgets take input from the OUT1 sum
+	 * bus when acting as outputs.
+	 */
+	{0x0b, AC_VERB_SET_CONNECT_SEL, 0},
+	{0x0d, AC_VERB_SET_CONNECT_SEL, 0},
+
+	/* Start with output sum widgets muted and their output gains at min */
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+
+	/* Unmute Line-out pin widget amp left and right
+	 * (no equiv mixer ctrl)
+	 */
+	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	/* Unmute Mic1 and Line1 pin widget input buffers since they start as
+	 * inputs. If the pin mode is changed by the user the pin mode control
+	 * will take care of enabling the pin's input/output buffers as needed.
+	 * Therefore there's no need to enable the input buffer at this
+	 * stage.
+	 */
+	{0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+
+	/* Mute capture amp left and right */
+	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	/* Set ADC connection select to match default mixer setting - mic
+	 * (on mic1 pin)
+	 */
+	{0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
+
+	/* Do similar with the second ADC: mute capture input amp and
+	 * set ADC connection to mic to match ALSA's default state.
+	 */
+	{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
+
+	/* Mute all inputs to mixer widget (even unconnected ones) */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */
+
+	{ }
+};
+
+static const struct hda_verb alc260_will_verbs[] = {
+	{0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+	{0x0b, AC_VERB_SET_CONNECT_SEL, 0x00},
+	{0x0d, AC_VERB_SET_CONNECT_SEL, 0x00},
+	{0x0f, AC_VERB_SET_EAPD_BTLENABLE, 0x02},
+	{0x1a, AC_VERB_SET_COEF_INDEX, 0x07},
+	{0x1a, AC_VERB_SET_PROC_COEF, 0x3040},
+	{}
+};
+
+static const struct hda_verb alc260_replacer_672v_verbs[] = {
+	{0x0f, AC_VERB_SET_EAPD_BTLENABLE, 0x02},
+	{0x1a, AC_VERB_SET_COEF_INDEX, 0x07},
+	{0x1a, AC_VERB_SET_PROC_COEF, 0x3050},
+
+	{0x01, AC_VERB_SET_GPIO_MASK, 0x01},
+	{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
+	{0x01, AC_VERB_SET_GPIO_DATA, 0x00},
+
+	{0x0f, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
+	{}
+};
+
+/* toggle speaker-output according to the hp-jack state */
+static void alc260_replacer_672v_automute(struct hda_codec *codec)
+{
+        unsigned int present;
+
+	/* speaker --> GPIO Data 0, hp or spdif --> GPIO data 1 */
+	present = snd_hda_jack_detect(codec, 0x0f);
+	if (present) {
+		snd_hda_codec_write_cache(codec, 0x01, 0,
+					  AC_VERB_SET_GPIO_DATA, 1);
+		snd_hda_codec_write_cache(codec, 0x0f, 0,
+					  AC_VERB_SET_PIN_WIDGET_CONTROL,
+					  PIN_HP);
+	} else {
+		snd_hda_codec_write_cache(codec, 0x01, 0,
+					  AC_VERB_SET_GPIO_DATA, 0);
+		snd_hda_codec_write_cache(codec, 0x0f, 0,
+					  AC_VERB_SET_PIN_WIDGET_CONTROL,
+					  PIN_OUT);
+	}
+}
+
+static void alc260_replacer_672v_unsol_event(struct hda_codec *codec,
+                                       unsigned int res)
+{
+        if ((res >> 26) == ALC_HP_EVENT)
+                alc260_replacer_672v_automute(codec);
+}
+
+static const struct hda_verb alc260_hp_dc7600_verbs[] = {
+	{0x05, AC_VERB_SET_CONNECT_SEL, 0x01},
+	{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
+	{0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+	{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+	{0x10, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
+	{0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
+	{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
+	{}
+};
+
+/* Test configuration for debugging, modelled after the ALC880 test
+ * configuration.
+ */
+#ifdef CONFIG_SND_DEBUG
+static const hda_nid_t alc260_test_dac_nids[1] = {
+	0x02,
+};
+static const hda_nid_t alc260_test_adc_nids[2] = {
+	0x04, 0x05,
+};
+/* For testing the ALC260, each input MUX needs its own definition since
+ * the signal assignments are different.  This assumes that the first ADC
+ * is NID 0x04.
+ */
+static const struct hda_input_mux alc260_test_capture_sources[2] = {
+	{
+		.num_items = 7,
+		.items = {
+			{ "MIC1 pin", 0x0 },
+			{ "MIC2 pin", 0x1 },
+			{ "LINE1 pin", 0x2 },
+			{ "LINE2 pin", 0x3 },
+			{ "CD pin", 0x4 },
+			{ "LINE-OUT pin", 0x5 },
+			{ "HP-OUT pin", 0x6 },
+		},
+        },
+	{
+		.num_items = 8,
+		.items = {
+			{ "MIC1 pin", 0x0 },
+			{ "MIC2 pin", 0x1 },
+			{ "LINE1 pin", 0x2 },
+			{ "LINE2 pin", 0x3 },
+			{ "CD pin", 0x4 },
+			{ "Mixer", 0x5 },
+			{ "LINE-OUT pin", 0x6 },
+			{ "HP-OUT pin", 0x7 },
+		},
+        },
+};
+static const struct snd_kcontrol_new alc260_test_mixer[] = {
+	/* Output driver widgets */
+	HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT),
+	HDA_CODEC_VOLUME("LOUT2 Playback Volume", 0x09, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE("LOUT2 Playback Switch", 0x09, 2, HDA_INPUT),
+	HDA_CODEC_VOLUME("LOUT1 Playback Volume", 0x08, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE("LOUT1 Playback Switch", 0x08, 2, HDA_INPUT),
+
+	/* Modes for retasking pin widgets
+	 * Note: the ALC260 doesn't seem to act on requests to enable mic
+         * bias from NIDs 0x0f and 0x10.  The ALC260 datasheet doesn't
+         * mention this restriction.  At this stage it's not clear whether
+         * this behaviour is intentional or is a hardware bug in chip
+         * revisions available at least up until early 2006.  Therefore for
+         * now allow the "HP-OUT" and "LINE-OUT" Mode controls to span all
+         * choices, but if it turns out that the lack of mic bias for these
+         * NIDs is intentional we could change their modes from
+         * ALC_PIN_DIR_INOUT to ALC_PIN_DIR_INOUT_NOMICBIAS.
+	 */
+	ALC_PIN_MODE("HP-OUT pin mode", 0x10, ALC_PIN_DIR_INOUT),
+	ALC_PIN_MODE("LINE-OUT pin mode", 0x0f, ALC_PIN_DIR_INOUT),
+	ALC_PIN_MODE("LINE2 pin mode", 0x15, ALC_PIN_DIR_INOUT),
+	ALC_PIN_MODE("LINE1 pin mode", 0x14, ALC_PIN_DIR_INOUT),
+	ALC_PIN_MODE("MIC2 pin mode", 0x13, ALC_PIN_DIR_INOUT),
+	ALC_PIN_MODE("MIC1 pin mode", 0x12, ALC_PIN_DIR_INOUT),
+
+	/* Loopback mixer controls */
+	HDA_CODEC_VOLUME("MIC1 Playback Volume", 0x07, 0x00, HDA_INPUT),
+	HDA_CODEC_MUTE("MIC1 Playback Switch", 0x07, 0x00, HDA_INPUT),
+	HDA_CODEC_VOLUME("MIC2 Playback Volume", 0x07, 0x01, HDA_INPUT),
+	HDA_CODEC_MUTE("MIC2 Playback Switch", 0x07, 0x01, HDA_INPUT),
+	HDA_CODEC_VOLUME("LINE1 Playback Volume", 0x07, 0x02, HDA_INPUT),
+	HDA_CODEC_MUTE("LINE1 Playback Switch", 0x07, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("LINE2 Playback Volume", 0x07, 0x03, HDA_INPUT),
+	HDA_CODEC_MUTE("LINE2 Playback Switch", 0x07, 0x03, HDA_INPUT),
+	HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
+	HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
+	HDA_CODEC_VOLUME("LINE-OUT loopback Playback Volume", 0x07, 0x06, HDA_INPUT),
+	HDA_CODEC_MUTE("LINE-OUT loopback Playback Switch", 0x07, 0x06, HDA_INPUT),
+	HDA_CODEC_VOLUME("HP-OUT loopback Playback Volume", 0x07, 0x7, HDA_INPUT),
+	HDA_CODEC_MUTE("HP-OUT loopback Playback Switch", 0x07, 0x7, HDA_INPUT),
+
+	/* Controls for GPIO pins, assuming they are configured as outputs */
+	ALC_GPIO_DATA_SWITCH("GPIO pin 0", 0x01, 0x01),
+	ALC_GPIO_DATA_SWITCH("GPIO pin 1", 0x01, 0x02),
+	ALC_GPIO_DATA_SWITCH("GPIO pin 2", 0x01, 0x04),
+	ALC_GPIO_DATA_SWITCH("GPIO pin 3", 0x01, 0x08),
+
+	/* Switches to allow the digital IO pins to be enabled.  The datasheet
+	 * is ambigious as to which NID is which; testing on laptops which
+	 * make this output available should provide clarification.
+	 */
+	ALC_SPDIF_CTRL_SWITCH("SPDIF Playback Switch", 0x03, 0x01),
+	ALC_SPDIF_CTRL_SWITCH("SPDIF Capture Switch", 0x06, 0x01),
+
+	/* A switch allowing EAPD to be enabled.  Some laptops seem to use
+	 * this output to turn on an external amplifier.
+	 */
+	ALC_EAPD_CTRL_SWITCH("LINE-OUT EAPD Enable Switch", 0x0f, 0x02),
+	ALC_EAPD_CTRL_SWITCH("HP-OUT EAPD Enable Switch", 0x10, 0x02),
+
+	{ } /* end */
+};
+static const struct hda_verb alc260_test_init_verbs[] = {
+	/* Enable all GPIOs as outputs with an initial value of 0 */
+	{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x0f},
+	{0x01, AC_VERB_SET_GPIO_DATA, 0x00},
+	{0x01, AC_VERB_SET_GPIO_MASK, 0x0f},
+
+	/* Enable retasking pins as output, initially without power amp */
+	{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+
+	/* Disable digital (SPDIF) pins initially, but users can enable
+	 * them via a mixer switch.  In the case of SPDIF-out, this initverb
+	 * payload also sets the generation to 0, output to be in "consumer"
+	 * PCM format, copyright asserted, no pre-emphasis and no validity
+	 * control.
+	 */
+	{0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
+	{0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
+
+	/* Ensure mic1, mic2, line1 and line2 pin widgets take input from the
+	 * OUT1 sum bus when acting as an output.
+	 */
+	{0x0b, AC_VERB_SET_CONNECT_SEL, 0},
+	{0x0c, AC_VERB_SET_CONNECT_SEL, 0},
+	{0x0d, AC_VERB_SET_CONNECT_SEL, 0},
+	{0x0e, AC_VERB_SET_CONNECT_SEL, 0},
+
+	/* Start with output sum widgets muted and their output gains at min */
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+
+	/* Unmute retasking pin widget output buffers since the default
+	 * state appears to be output.  As the pin mode is changed by the
+	 * user the pin mode control will take care of enabling the pin's
+	 * input/output buffers as needed.
+	 */
+	{0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	/* Also unmute the mono-out pin widget */
+	{0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+
+	/* Mute capture amp left and right */
+	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	/* Set ADC connection select to match default mixer setting (mic1
+	 * pin)
+	 */
+	{0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
+
+	/* Do the same for the second ADC: mute capture input amp and
+	 * set ADC connection to mic1 pin
+	 */
+	{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
+
+	/* Mute all inputs to mixer widget (even unconnected ones) */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */
+
+	{ }
+};
+#endif
+
+/*
+ * ALC260 configurations
+ */
+static const char * const alc260_models[ALC260_MODEL_LAST] = {
+	[ALC260_BASIC]		= "basic",
+	[ALC260_HP]		= "hp",
+	[ALC260_HP_3013]	= "hp-3013",
+	[ALC260_HP_DC7600]	= "hp-dc7600",
+	[ALC260_FUJITSU_S702X]	= "fujitsu",
+	[ALC260_ACER]		= "acer",
+	[ALC260_WILL]		= "will",
+	[ALC260_REPLACER_672V]	= "replacer",
+	[ALC260_FAVORIT100]	= "favorit100",
+#ifdef CONFIG_SND_DEBUG
+	[ALC260_TEST]		= "test",
+#endif
+	[ALC260_AUTO]		= "auto",
+};
+
+static const struct snd_pci_quirk alc260_cfg_tbl[] = {
+	SND_PCI_QUIRK(0x1025, 0x007b, "Acer C20x", ALC260_ACER),
+	SND_PCI_QUIRK(0x1025, 0x007f, "Acer", ALC260_WILL),
+	SND_PCI_QUIRK(0x1025, 0x008f, "Acer", ALC260_ACER),
+	SND_PCI_QUIRK(0x1509, 0x4540, "Favorit 100XS", ALC260_FAVORIT100),
+	SND_PCI_QUIRK(0x103c, 0x2808, "HP d5700", ALC260_HP_3013),
+	SND_PCI_QUIRK(0x103c, 0x280a, "HP d5750", ALC260_AUTO), /* no quirk */
+	SND_PCI_QUIRK(0x103c, 0x3010, "HP", ALC260_HP_3013),
+	SND_PCI_QUIRK(0x103c, 0x3011, "HP", ALC260_HP_3013),
+	SND_PCI_QUIRK(0x103c, 0x3012, "HP", ALC260_HP_DC7600),
+	SND_PCI_QUIRK(0x103c, 0x3013, "HP", ALC260_HP_3013),
+	SND_PCI_QUIRK(0x103c, 0x3014, "HP", ALC260_HP),
+	SND_PCI_QUIRK(0x103c, 0x3015, "HP", ALC260_HP),
+	SND_PCI_QUIRK(0x103c, 0x3016, "HP", ALC260_HP),
+	SND_PCI_QUIRK(0x104d, 0x81bb, "Sony VAIO", ALC260_BASIC),
+	SND_PCI_QUIRK(0x104d, 0x81cc, "Sony VAIO", ALC260_BASIC),
+	SND_PCI_QUIRK(0x104d, 0x81cd, "Sony VAIO", ALC260_BASIC),
+	SND_PCI_QUIRK(0x10cf, 0x1326, "Fujitsu S702X", ALC260_FUJITSU_S702X),
+	SND_PCI_QUIRK(0x152d, 0x0729, "CTL U553W", ALC260_BASIC),
+	SND_PCI_QUIRK(0x161f, 0x2057, "Replacer 672V", ALC260_REPLACER_672V),
+	SND_PCI_QUIRK(0x1631, 0xc017, "PB V7900", ALC260_WILL),
+	{}
+};
+
+static const struct alc_config_preset alc260_presets[] = {
+	[ALC260_BASIC] = {
+		.mixers = { alc260_base_output_mixer,
+			    alc260_input_mixer },
+		.init_verbs = { alc260_init_verbs },
+		.num_dacs = ARRAY_SIZE(alc260_dac_nids),
+		.dac_nids = alc260_dac_nids,
+		.num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
+		.adc_nids = alc260_dual_adc_nids,
+		.num_channel_mode = ARRAY_SIZE(alc260_modes),
+		.channel_mode = alc260_modes,
+		.input_mux = &alc260_capture_source,
+	},
+	[ALC260_HP] = {
+		.mixers = { alc260_hp_output_mixer,
+			    alc260_input_mixer },
+		.init_verbs = { alc260_init_verbs,
+				alc260_hp_unsol_verbs },
+		.num_dacs = ARRAY_SIZE(alc260_dac_nids),
+		.dac_nids = alc260_dac_nids,
+		.num_adc_nids = ARRAY_SIZE(alc260_adc_nids_alt),
+		.adc_nids = alc260_adc_nids_alt,
+		.num_channel_mode = ARRAY_SIZE(alc260_modes),
+		.channel_mode = alc260_modes,
+		.input_mux = &alc260_capture_source,
+		.unsol_event = alc_sku_unsol_event,
+		.setup = alc260_hp_setup,
+		.init_hook = alc_inithook,
+	},
+	[ALC260_HP_DC7600] = {
+		.mixers = { alc260_hp_dc7600_mixer,
+			    alc260_input_mixer },
+		.init_verbs = { alc260_init_verbs,
+				alc260_hp_dc7600_verbs },
+		.num_dacs = ARRAY_SIZE(alc260_dac_nids),
+		.dac_nids = alc260_dac_nids,
+		.num_adc_nids = ARRAY_SIZE(alc260_adc_nids_alt),
+		.adc_nids = alc260_adc_nids_alt,
+		.num_channel_mode = ARRAY_SIZE(alc260_modes),
+		.channel_mode = alc260_modes,
+		.input_mux = &alc260_capture_source,
+		.unsol_event = alc_sku_unsol_event,
+		.setup = alc260_hp_3012_setup,
+		.init_hook = alc_inithook,
+	},
+	[ALC260_HP_3013] = {
+		.mixers = { alc260_hp_3013_mixer,
+			    alc260_input_mixer },
+		.init_verbs = { alc260_hp_3013_init_verbs,
+				alc260_hp_3013_unsol_verbs },
+		.num_dacs = ARRAY_SIZE(alc260_dac_nids),
+		.dac_nids = alc260_dac_nids,
+		.num_adc_nids = ARRAY_SIZE(alc260_adc_nids_alt),
+		.adc_nids = alc260_adc_nids_alt,
+		.num_channel_mode = ARRAY_SIZE(alc260_modes),
+		.channel_mode = alc260_modes,
+		.input_mux = &alc260_capture_source,
+		.unsol_event = alc_sku_unsol_event,
+		.setup = alc260_hp_3013_setup,
+		.init_hook = alc_inithook,
+	},
+	[ALC260_FUJITSU_S702X] = {
+		.mixers = { alc260_fujitsu_mixer },
+		.init_verbs = { alc260_fujitsu_init_verbs },
+		.num_dacs = ARRAY_SIZE(alc260_dac_nids),
+		.dac_nids = alc260_dac_nids,
+		.num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
+		.adc_nids = alc260_dual_adc_nids,
+		.num_channel_mode = ARRAY_SIZE(alc260_modes),
+		.channel_mode = alc260_modes,
+		.num_mux_defs = ARRAY_SIZE(alc260_fujitsu_capture_sources),
+		.input_mux = alc260_fujitsu_capture_sources,
+	},
+	[ALC260_ACER] = {
+		.mixers = { alc260_acer_mixer },
+		.init_verbs = { alc260_acer_init_verbs },
+		.num_dacs = ARRAY_SIZE(alc260_dac_nids),
+		.dac_nids = alc260_dac_nids,
+		.num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
+		.adc_nids = alc260_dual_adc_nids,
+		.num_channel_mode = ARRAY_SIZE(alc260_modes),
+		.channel_mode = alc260_modes,
+		.num_mux_defs = ARRAY_SIZE(alc260_acer_capture_sources),
+		.input_mux = alc260_acer_capture_sources,
+	},
+	[ALC260_FAVORIT100] = {
+		.mixers = { alc260_favorit100_mixer },
+		.init_verbs = { alc260_favorit100_init_verbs },
+		.num_dacs = ARRAY_SIZE(alc260_dac_nids),
+		.dac_nids = alc260_dac_nids,
+		.num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
+		.adc_nids = alc260_dual_adc_nids,
+		.num_channel_mode = ARRAY_SIZE(alc260_modes),
+		.channel_mode = alc260_modes,
+		.num_mux_defs = ARRAY_SIZE(alc260_favorit100_capture_sources),
+		.input_mux = alc260_favorit100_capture_sources,
+	},
+	[ALC260_WILL] = {
+		.mixers = { alc260_will_mixer },
+		.init_verbs = { alc260_init_verbs, alc260_will_verbs },
+		.num_dacs = ARRAY_SIZE(alc260_dac_nids),
+		.dac_nids = alc260_dac_nids,
+		.num_adc_nids = ARRAY_SIZE(alc260_adc_nids),
+		.adc_nids = alc260_adc_nids,
+		.dig_out_nid = ALC260_DIGOUT_NID,
+		.num_channel_mode = ARRAY_SIZE(alc260_modes),
+		.channel_mode = alc260_modes,
+		.input_mux = &alc260_capture_source,
+	},
+	[ALC260_REPLACER_672V] = {
+		.mixers = { alc260_replacer_672v_mixer },
+		.init_verbs = { alc260_init_verbs, alc260_replacer_672v_verbs },
+		.num_dacs = ARRAY_SIZE(alc260_dac_nids),
+		.dac_nids = alc260_dac_nids,
+		.num_adc_nids = ARRAY_SIZE(alc260_adc_nids),
+		.adc_nids = alc260_adc_nids,
+		.dig_out_nid = ALC260_DIGOUT_NID,
+		.num_channel_mode = ARRAY_SIZE(alc260_modes),
+		.channel_mode = alc260_modes,
+		.input_mux = &alc260_capture_source,
+		.unsol_event = alc260_replacer_672v_unsol_event,
+		.init_hook = alc260_replacer_672v_automute,
+	},
+#ifdef CONFIG_SND_DEBUG
+	[ALC260_TEST] = {
+		.mixers = { alc260_test_mixer },
+		.init_verbs = { alc260_test_init_verbs },
+		.num_dacs = ARRAY_SIZE(alc260_test_dac_nids),
+		.dac_nids = alc260_test_dac_nids,
+		.num_adc_nids = ARRAY_SIZE(alc260_test_adc_nids),
+		.adc_nids = alc260_test_adc_nids,
+		.num_channel_mode = ARRAY_SIZE(alc260_modes),
+		.channel_mode = alc260_modes,
+		.num_mux_defs = ARRAY_SIZE(alc260_test_capture_sources),
+		.input_mux = alc260_test_capture_sources,
+	},
+#endif
+};
+