ALSA: usb-audio: Add support for Presonus Studio 1810c

This patch adds support for Presonus Studio 1810c, a usb interface
that's UAC2 compliant with a few quirks and a few extra hw-specific
controls. I've tested all 3 altsettings and the added switch
controls and they work as expected.

More infos on the card:
https://www.presonus.com/products/Studio-1810c

Note that this work is based on packet inspection with
usbmon. I just wanted to get this card to work for using
it on our open-source radio station:
https://github.com/UoC-Radio

v2 address issues reported by Takashi:
* Properly get/set enum type controls
* Prevent race condition on switch_get/set
* Various control naming changes
* Various coding style fixes

v3 improve readability of sample rate filtering
and some other minor changes.

Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Link: https://lore.kernel.org/r/5e47481a.1c69fb81.befb3.8dac@mx.google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

1 files changed, 37 insertions, 0 deletions

diff --git a/sound/usb/format.c b/sound/usb/format.c
index 9260136e4c9b..51e9fca1f3dc 100644
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -226,6 +226,36 @@ static int parse_audio_format_rates_v1(struct snd_usb_audio *chip, struct audiof
 	return 0;
 }
 
+
+/*
+ * Presonus Studio 1810c supports a limited set of sampling
+ * rates per altsetting but reports the full set each time.
+ * If we don't filter out the unsupported rates and attempt
+ * to configure the card, it will hang refusing to do any
+ * further audio I/O until a hard reset is performed.
+ *
+ * The list of supported rates per altsetting (set of available
+ * I/O channels) is described in the owner's manual, section 2.2.
+ */
+static bool s1810c_valid_sample_rate(struct audioformat *fp,
+				     unsigned int rate)
+{
+	switch (fp->altsetting) {
+	case 1:
+		/* All ADAT ports available */
+		return rate <= 48000;
+	case 2:
+		/* Half of ADAT ports available */
+		return (rate == 88200 || rate == 96000);
+	case 3:
+		/* Analog I/O only (no S/PDIF nor ADAT) */
+		return rate >= 176400;
+	default:
+		return false;
+	}
+	return false;
+}
+
 /*
  * Helper function to walk the array of sample rate triplets reported by
  * the device. The problem is that we need to parse whole array first to
@@ -262,6 +292,12 @@ static int parse_uac2_sample_rate_range(struct snd_usb_audio *chip,
 		}
 
 		for (rate = min; rate <= max; rate += res) {
+
+			/* Filter out invalid rates on Presonus Studio 1810c */
+			if (chip->usb_id == USB_ID(0x0194f, 0x010c) &&
+			    !s1810c_valid_sample_rate(fp, rate))
+				goto skip_rate;
+
 			if (fp->rate_table)
 				fp->rate_table[nr_rates] = rate;
 			if (!fp->rate_min || rate < fp->rate_min)
@@ -276,6 +312,7 @@ static int parse_uac2_sample_rate_range(struct snd_usb_audio *chip,
 				break;
 			}
 
+skip_rate:
 			/* avoid endless loop */
 			if (res == 0)
 				break;