diff options
author | Steven Rostedt <srostedt@redhat.com> | 2010-11-08 17:41:37 -0500 |
---|---|---|
committer | Steven Rostedt <rostedt@goodmis.org> | 2010-11-18 11:23:11 -0500 |
commit | d1fbd7e6a6a4c67ab895a0219a2bbcf09d039c3a (patch) | |
tree | c504d6f404e24add0211a2a15630173fd13524f1 /tools/testing | |
parent | dbc6d0aa8ae38cf9cfe39c6076cc5378ef4ca4a2 (diff) | |
download | linux-d1fbd7e6a6a4c67ab895a0219a2bbcf09d039c3a.tar.gz linux-d1fbd7e6a6a4c67ab895a0219a2bbcf09d039c3a.tar.bz2 linux-d1fbd7e6a6a4c67ab895a0219a2bbcf09d039c3a.zip |
ktest: Updated the sample.conf for the latest options
Added documentation for SSH_EXEC, SCP_TO_TARGET, REBOOT,
and CONFIG_BISECT and friends.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Diffstat (limited to 'tools/testing')
-rw-r--r-- | tools/testing/ktest/sample.conf | 90 |
1 files changed, 89 insertions, 1 deletions
diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index 03d6e91245fe..e1272746ce8c 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -390,6 +390,21 @@ # Example for a virtual guest call "Guest". #POWER_OFF = virsh destroy Guest +# The way to execute a command on the target +# (default ssh $SSH_USER@$MACHINE $SSH_COMMAND";) +# The variables SSH_USER, MACHINE and SSH_COMMAND are defined +#SSH_EXEC = ssh $SSH_USER@$MACHINE $SSH_COMMAND"; + +# The way to copy a file to the target +# (default scp $SRC_FILE $SSH_USER@$MACHINE:$DST_FILE) +# The variables SSH_USER, MACHINE, SRC_FILE and DST_FILE are defined. +#SCP_TO_TARGET = scp $SRC_FILE $SSH_USER@$MACHINE:$DST_FILE + +# The nice way to reboot the target +# (default ssh $SSH_USER@$MACHINE reboot) +# The variables SSH_USER and MACHINE are defined. +#REBOOT = ssh $SSH_USER@$MACHINE reboot + #### Per test run options #### # The following options are only allowed in TEST_START sections. # They are ignored in the DEFAULTS sections. @@ -442,7 +457,7 @@ # CHECKOUT = mybranch # PATCHCHECK_TYPE = boot # PATCHCHECK_START = 747e94ae3d1b4c9bf5380e569f614eb9040b79e7 -# PATCHCHEKC_END = HEAD~2 +# PATCHCHECK_END = HEAD~2 # # # @@ -520,3 +535,76 @@ # BISECT_BAD = b5153163ed580e00c67bdfecb02b2e3843817b3e # BISECT_TYPE = build # MIN_CONFIG = /home/test/config-bisect +# +# +# +# For TEST_TYPE = config_bisect +# +# In those cases that you have two different configs. One of them +# work, the other does not, and you do not know what config causes +# the problem. +# The TEST_TYPE config_bisect will bisect the bad config looking for +# what config causes the failure. +# +# The way it works is this: +# +# First it finds a config to work with. Since a different version, or +# MIN_CONFIG may cause different dependecies, it must run through this +# preparation. +# +# Overwrites any config set in the bad config with a config set in +# either the MIN_CONFIG or ADD_CONFIG. Thus, make sure these configs +# are minimal and do not disable configs you want to test: +# (ie. # CONFIG_FOO is not set). +# +# An oldconfig is run on the bad config and any new config that +# appears will be added to the configs to test. +# +# Finally, it generates a config with the above result and runs it +# again through make oldconfig to produce a config that should be +# satisfied by kconfig. +# +# Then it starts the bisect. +# +# The configs to test are cut in half. If all the configs in this +# half depend on a config in the other half, then the other half +# is tested instead. If no configs are enabled by either half, then +# this means a circular dependency exists and the test fails. +# +# A config is created with the test half, and the bisect test is run. +# +# If the bisect succeeds, then all configs in the generated config +# are removed from the configs to test and added to the configs that +# will be enabled for all builds (they will be enabled, but not be part +# of the configs to examine). +# +# If the bisect fails, then all test configs that were not enabled by +# the config file are removed from the test. These configs will not +# be enabled in future tests. Since current config failed, we consider +# this to be a subset of the config that we started with. +# +# When we are down to one config, it is considered the bad config. +# +# Note, the config chosen may not be the true bad config. Due to +# dependencies and selections of the kbuild system, mulitple +# configs may be needed to cause a failure. If you disable the +# config that was found and restart the test, if the test fails +# again, it is recommended to rerun the config_bisect with a new +# bad config without the found config enabled. +# +# The option BUILD_TYPE will be ignored. +# +# CONFIG_BISECT_TYPE is the type of test to perform: +# build - bad fails to build +# boot - bad builds but fails to boot +# test - bad boots but fails a test +# +# CONFIG_BISECT is the config that failed to boot +# +# Example: +# TEST_START +# TEST_TYPE = config_bisect +# CONFIG_BISECT_TYPE = build +# CONFIG_BISECT = /home/test/˘onfig-bad +# MIN_CONFIG = /home/test/config-min +# |