diff options
| -rw-r--r-- | drivers/net/skge.c | 6 | ||||
| -rw-r--r-- | drivers/net/skge.h | 20 |
2 files changed, 13 insertions, 13 deletions
diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 0857be8f99f2..6b04b89cbb4f 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -248,7 +248,7 @@ static int skge_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) } else { u32 setting; - switch(ecmd->speed) { + switch (ecmd->speed) { case SPEED_1000: if (ecmd->duplex == DUPLEX_FULL) setting = SUPPORTED_1000baseT_Full; @@ -1026,7 +1026,7 @@ static void bcom_check_link(struct skge_hw *hw, int port) } /* Check Duplex mismatch */ - switch(aux & PHY_B_AS_AN_RES_MSK) { + switch (aux & PHY_B_AS_AN_RES_MSK) { case PHY_B_RES_1000FD: skge->duplex = DUPLEX_FULL; break; @@ -1097,7 +1097,7 @@ static void bcom_phy_init(struct skge_port *skge, int jumbo) r |= XM_MMU_NO_PRE; xm_write16(hw, port, XM_MMU_CMD,r); - switch(id1) { + switch (id1) { case PHY_BCOM_ID1_C0: /* * Workaround BCOM Errata for the C0 type. diff --git a/drivers/net/skge.h b/drivers/net/skge.h index fced3d2bc072..2086809f4b03 100644 --- a/drivers/net/skge.h +++ b/drivers/net/skge.h @@ -1509,7 +1509,7 @@ enum { PHY_M_LEDC_TX_C_MSB = 1<<0, /* Tx Control (MSB, 88E1111 only) */ }; -#define PHY_M_LED_PULS_DUR(x) ( ((x)<<12) & PHY_M_LEDC_PULS_MSK) +#define PHY_M_LED_PULS_DUR(x) (((x)<<12) & PHY_M_LEDC_PULS_MSK) enum { PULS_NO_STR = 0,/* no pulse stretching */ @@ -1522,7 +1522,7 @@ enum { PULS_1300MS = 7,/* 1.3 s to 2.7 s */ }; -#define PHY_M_LED_BLINK_RT(x) ( ((x)<<8) & PHY_M_LEDC_BL_R_MSK) +#define PHY_M_LED_BLINK_RT(x) (((x)<<8) & PHY_M_LEDC_BL_R_MSK) enum { BLINK_42MS = 0,/* 42 ms */ @@ -1602,9 +1602,9 @@ enum { PHY_M_FELP_LED0_MSK = 0xf, /* Bit 3.. 0: LED0 Mask (SPEED) */ }; -#define PHY_M_FELP_LED2_CTRL(x) ( ((x)<<8) & PHY_M_FELP_LED2_MSK) -#define PHY_M_FELP_LED1_CTRL(x) ( ((x)<<4) & PHY_M_FELP_LED1_MSK) -#define PHY_M_FELP_LED0_CTRL(x) ( ((x)<<0) & PHY_M_FELP_LED0_MSK) +#define PHY_M_FELP_LED2_CTRL(x) (((x)<<8) & PHY_M_FELP_LED2_MSK) +#define PHY_M_FELP_LED1_CTRL(x) (((x)<<4) & PHY_M_FELP_LED1_MSK) +#define PHY_M_FELP_LED0_CTRL(x) (((x)<<0) & PHY_M_FELP_LED0_MSK) enum { LED_PAR_CTRL_COLX = 0x00, @@ -1640,7 +1640,7 @@ enum { PHY_M_MAC_MD_COPPER = 5,/* Copper only */ PHY_M_MAC_MD_1000BX = 7,/* 1000Base-X only */ }; -#define PHY_M_MAC_MODE_SEL(x) ( ((x)<<7) & PHY_M_MAC_MD_MSK) +#define PHY_M_MAC_MODE_SEL(x) (((x)<<7) & PHY_M_MAC_MD_MSK) /***** PHY_MARV_PHY_CTRL (page 3) 16 bit r/w LED Control Reg. *****/ enum { @@ -1650,10 +1650,10 @@ enum { PHY_M_LEDC_STA0_MSK = 0xf, /* Bit 3.. 0: STAT0 LED Ctrl. Mask */ }; -#define PHY_M_LEDC_LOS_CTRL(x) ( ((x)<<12) & PHY_M_LEDC_LOS_MSK) -#define PHY_M_LEDC_INIT_CTRL(x) ( ((x)<<8) & PHY_M_LEDC_INIT_MSK) -#define PHY_M_LEDC_STA1_CTRL(x) ( ((x)<<4) & PHY_M_LEDC_STA1_MSK) -#define PHY_M_LEDC_STA0_CTRL(x) ( ((x)<<0) & PHY_M_LEDC_STA0_MSK) +#define PHY_M_LEDC_LOS_CTRL(x) (((x)<<12) & PHY_M_LEDC_LOS_MSK) +#define PHY_M_LEDC_INIT_CTRL(x) (((x)<<8) & PHY_M_LEDC_INIT_MSK) +#define PHY_M_LEDC_STA1_CTRL(x) (((x)<<4) & PHY_M_LEDC_STA1_MSK) +#define PHY_M_LEDC_STA0_CTRL(x) (((x)<<0) & PHY_M_LEDC_STA0_MSK) /* GMAC registers */ /* Port Registers */ |