diff options
| -rw-r--r-- | drivers/media/video/tvp5150.c | 70 | ||||
| -rw-r--r-- | include/media/v4l2-common.h | 3 |
2 files changed, 70 insertions, 3 deletions
diff --git a/drivers/media/video/tvp5150.c b/drivers/media/video/tvp5150.c index df7f304416c9..20e63593e441 100644 --- a/drivers/media/video/tvp5150.c +++ b/drivers/media/video/tvp5150.c @@ -541,7 +541,7 @@ static struct i2c_vbi_ram_value vbi_ram_default[] = 0x69, 0x8c, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 } }, {0x110, /* Wide Screen Signal, PAL/SECAM */ - {V4L2_SLICED_WSS_625,20,21,1}, + {V4L2_SLICED_WSS_625,23,23,1}, { 0x5b, 0x55, 0xc5, 0xff, 0x00, 0x71, 0x6e, 0x42, 0xa6, 0xcd, 0x0f, 0x00, 0x00, 0x00, 0x3a, 0x00 } }, @@ -649,7 +649,7 @@ static int tvp5150_set_vbi(struct i2c_client *c, if (std == V4L2_STD_ALL) { tvp5150_err("VBI can't be configured without knowing number of lines\n"); - return -EINVAL; + return 0; } else if (std && V4L2_STD_625_50) { /* Don't follow NTSC Line number convension */ line += 3; @@ -686,6 +686,37 @@ static int tvp5150_set_vbi(struct i2c_client *c, return type; } +static int tvp5150_get_vbi(struct i2c_client *c, + const struct i2c_vbi_ram_value *regs, int line) +{ + struct tvp5150 *decoder = i2c_get_clientdata(c); + v4l2_std_id std=decoder->norm; + u8 reg; + int pos, type=0; + + if (std == V4L2_STD_ALL) { + tvp5150_err("VBI can't be configured without knowing number of lines\n"); + return 0; + } else if (std && V4L2_STD_625_50) { + /* Don't follow NTSC Line number convension */ + line += 3; + } + + if (line<6||line>27) + return 0; + + reg=((line-6)<<1)+TVP5150_LINE_MODE_INI; + + pos=tvp5150_read(c, reg)&0x0f; + if (pos<0x0f) + type=regs[pos].type.vbi_type; + + pos=tvp5150_read(c, reg+1)&0x0f; + if (pos<0x0f) + type|=regs[pos].type.vbi_type; + + return type; +} static int tvp5150_set_std(struct i2c_client *c, v4l2_std_id std) { struct tvp5150 *decoder = i2c_get_clientdata(c); @@ -856,9 +887,43 @@ static int tvp5150_command(struct i2c_client *c, vbi_ram_default, svbi->service_lines[0][i],0xf0,i,3); } + /* Enables FIFO */ + tvp5150_write(c, TVP5150_FIFO_OUT_CTRL,1); + } else { + /* Disables FIFO*/ + tvp5150_write(c, TVP5150_FIFO_OUT_CTRL,0); + + /* Disable Full Field */ + tvp5150_write(c, TVP5150_FULL_FIELD_ENA, 0); + + /* Disable Line modes */ + for (i=TVP5150_LINE_MODE_INI; i<=TVP5150_LINE_MODE_END; i++) + tvp5150_write(c, i, 0xff); + } + break; + } + case VIDIOC_G_FMT: + { + struct v4l2_format *fmt; + struct v4l2_sliced_vbi_format *svbi; + + int i, mask=0; + + fmt = arg; + if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) + return -EINVAL; + svbi = &fmt->fmt.sliced; + memset(svbi, 0, sizeof(*svbi)); + + for (i = 0; i <= 23; i++) { + svbi->service_lines[0][i]=tvp5150_get_vbi(c, + vbi_ram_default,i); + mask|=svbi->service_lines[0][i]; } + svbi->service_set=mask; break; } + #ifdef CONFIG_VIDEO_ADV_DEBUG case VIDIOC_INT_G_REGISTER: { @@ -883,6 +948,7 @@ static int tvp5150_command(struct i2c_client *c, } #endif + case VIDIOC_LOG_STATUS: case DECODER_DUMP: dump_reg(c); break; diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h index d4030a7e16e0..11728daf0096 100644 --- a/include/media/v4l2-common.h +++ b/include/media/v4l2-common.h @@ -160,7 +160,8 @@ struct msp_matrix { /* Used to generate VBI signals on a video signal. v4l2_sliced_vbi_data is filled with the data packets that should be output. Note that if you set - the line field to 0, then that VBI signal is disabled. */ + the line field to 0, then that VBI signal is disabled. If no + valid VBI data was found, then the type field is set to 0 on return. */ #define VIDIOC_INT_S_VBI_DATA _IOW ('d', 105, struct v4l2_sliced_vbi_data) /* Used to obtain the sliced VBI packet from a readback register. Not all |