summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/powerpc/include/asm/macio.h3
-rw-r--r--arch/powerpc/include/asm/mediabay.h27
-rw-r--r--drivers/block/swim3.c39
-rw-r--r--drivers/ide/pmac.c92
-rw-r--r--drivers/macintosh/mediabay.c328
5 files changed, 214 insertions, 275 deletions
diff --git a/arch/powerpc/include/asm/macio.h b/arch/powerpc/include/asm/macio.h
index 86d5fed1c49f..a062c57696d0 100644
--- a/arch/powerpc/include/asm/macio.h
+++ b/arch/powerpc/include/asm/macio.h
@@ -134,6 +134,9 @@ struct macio_driver
int (*resume)(struct macio_dev* dev);
int (*shutdown)(struct macio_dev* dev);
+#ifdef CONFIG_PMAC_MEDIABAY
+ void (*mediabay_event)(struct macio_dev* dev, int mb_state);
+#endif
struct device_driver driver;
};
#define to_macio_driver(drv) container_of(drv,struct macio_driver, driver)
diff --git a/arch/powerpc/include/asm/mediabay.h b/arch/powerpc/include/asm/mediabay.h
index b2efb3325808..11037a4133ee 100644
--- a/arch/powerpc/include/asm/mediabay.h
+++ b/arch/powerpc/include/asm/mediabay.h
@@ -17,26 +17,31 @@
#define MB_POWER 6 /* media bay contains a Power device (???) */
#define MB_NO 7 /* media bay contains nothing */
-/* Number of bays in the machine or 0 */
-extern int media_bay_count;
+struct macio_dev;
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
-#include <linux/ide.h>
+#ifdef CONFIG_PMAC_MEDIABAY
-int check_media_bay_by_base(unsigned long base, int what);
-/* called by IDE PMAC host driver to register IDE controller for media bay */
-int media_bay_set_ide_infos(struct device_node *which_bay, unsigned long base,
- int irq, ide_hwif_t *hwif);
+/* Check the content type of the bay, returns MB_NO if the bay is still
+ * transitionning
+ */
+extern int check_media_bay(struct macio_dev *bay);
-int check_media_bay(struct device_node *which_bay, int what);
+/* The ATA driver uses the calls below to temporarily hold on the
+ * media bay callbacks while initializing the interface
+ */
+extern void lock_media_bay(struct macio_dev *bay);
+extern void unlock_media_bay(struct macio_dev *bay);
#else
-static inline int check_media_bay(struct device_node *which_bay, int what)
+static inline int check_media_bay(struct macio_dev *bay)
{
- return -ENODEV;
+ return MB_NO;
}
+static inline void lock_media_bay(struct macio_dev *bay) { }
+static inline void unlock_media_bay(struct macio_dev *bay) { }
+
#endif
#endif /* __KERNEL__ */
diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c
index 6380ad8d91bd..59ca2b77b574 100644
--- a/drivers/block/swim3.c
+++ b/drivers/block/swim3.c
@@ -200,7 +200,7 @@ struct floppy_state {
int ejected;
wait_queue_head_t wait;
int wanted;
- struct device_node* media_bay; /* NULL when not in bay */
+ struct macio_dev *mdev;
char dbdma_cmd_space[5 * sizeof(struct dbdma_cmd)];
};
@@ -303,14 +303,13 @@ static int swim3_readbit(struct floppy_state *fs, int bit)
static void do_fd_request(struct request_queue * q)
{
int i;
- for(i=0;i<floppy_count;i++)
- {
-#ifdef CONFIG_PMAC_MEDIABAY
- if (floppy_states[i].media_bay &&
- check_media_bay(floppy_states[i].media_bay, MB_FD))
+
+ for(i=0; i<floppy_count; i++) {
+ struct floppy_state *fs = &floppy_states[i];
+ if (fs->mdev->media_bay &&
+ check_media_bay(fs->mdev->media_bay) != MB_FD)
continue;
-#endif /* CONFIG_PMAC_MEDIABAY */
- start_request(&floppy_states[i]);
+ start_request(fs);
}
}
@@ -849,10 +848,9 @@ static int floppy_ioctl(struct block_device *bdev, fmode_t mode,
if ((cmd & 0x80) && !capable(CAP_SYS_ADMIN))
return -EPERM;
-#ifdef CONFIG_PMAC_MEDIABAY
- if (fs->media_bay && check_media_bay(fs->media_bay, MB_FD))
+ if (fs->mdev->media_bay &&
+ check_media_bay(fs->mdev->media_bay) != MB_FD)
return -ENXIO;
-#endif
switch (cmd) {
case FDEJECT:
@@ -876,10 +874,9 @@ static int floppy_open(struct block_device *bdev, fmode_t mode)
int n, err = 0;
if (fs->ref_count == 0) {
-#ifdef CONFIG_PMAC_MEDIABAY
- if (fs->media_bay && check_media_bay(fs->media_bay, MB_FD))
+ if (fs->mdev->media_bay &&
+ check_media_bay(fs->mdev->media_bay) != MB_FD)
return -ENXIO;
-#endif
out_8(&sw->setup, S_IBM_DRIVE | S_FCLK_DIV2);
out_8(&sw->control_bic, 0xff);
out_8(&sw->mode, 0x95);
@@ -963,10 +960,9 @@ static int floppy_revalidate(struct gendisk *disk)
struct swim3 __iomem *sw;
int ret, n;
-#ifdef CONFIG_PMAC_MEDIABAY
- if (fs->media_bay && check_media_bay(fs->media_bay, MB_FD))
+ if (fs->mdev->media_bay &&
+ check_media_bay(fs->mdev->media_bay) != MB_FD)
return -ENXIO;
-#endif
sw = fs->swim3;
grab_drive(fs, revalidating, 0);
@@ -1009,7 +1005,6 @@ static const struct block_device_operations floppy_fops = {
static int swim3_add_device(struct macio_dev *mdev, int index)
{
struct device_node *swim = mdev->ofdev.node;
- struct device_node *mediabay;
struct floppy_state *fs = &floppy_states[index];
int rc = -EBUSY;
@@ -1036,9 +1031,7 @@ static int swim3_add_device(struct macio_dev *mdev, int index)
}
dev_set_drvdata(&mdev->ofdev.dev, fs);
- mediabay = (strcasecmp(swim->parent->type, "media-bay") == 0) ?
- swim->parent : NULL;
- if (mediabay == NULL)
+ if (mdev->media_bay == NULL)
pmac_call_feature(PMAC_FTR_SWIM3_ENABLE, swim, 0, 1);
memset(fs, 0, sizeof(*fs));
@@ -1068,7 +1061,7 @@ static int swim3_add_device(struct macio_dev *mdev, int index)
fs->secpercyl = 36;
fs->secpertrack = 18;
fs->total_secs = 2880;
- fs->media_bay = mediabay;
+ fs->mdev = mdev;
init_waitqueue_head(&fs->wait);
fs->dma_cmd = (struct dbdma_cmd *) DBDMA_ALIGN(fs->dbdma_cmd_space);
@@ -1093,7 +1086,7 @@ static int swim3_add_device(struct macio_dev *mdev, int index)
init_timer(&fs->timeout);
printk(KERN_INFO "fd%d: SWIM3 floppy controller %s\n", floppy_count,
- mediabay ? "in media bay" : "");
+ mdev->media_bay ? "in media bay" : "");
return 0;
diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c
index 97642a7a79c4..7a4e788cab2f 100644
--- a/drivers/ide/pmac.c
+++ b/drivers/ide/pmac.c
@@ -43,10 +43,7 @@
#include <asm/pmac_feature.h>
#include <asm/sections.h>
#include <asm/irq.h>
-
-#ifndef CONFIG_PPC64
#include <asm/mediabay.h>
-#endif
#define DRV_NAME "ide-pmac"
@@ -59,13 +56,14 @@ typedef struct pmac_ide_hwif {
int irq;
int kind;
int aapl_bus_id;
- unsigned mediabay : 1;
unsigned broken_dma : 1;
unsigned broken_dma_warn : 1;
struct device_node* node;
struct macio_dev *mdev;
u32 timings[4];
volatile u32 __iomem * *kauai_fcr;
+ ide_hwif_t *hwif;
+
/* Those fields are duplicating what is in hwif. We currently
* can't use the hwif ones because of some assumptions that are
* beeing done by the generic code about the kind of dma controller
@@ -854,6 +852,11 @@ sanitize_timings(pmac_ide_hwif_t *pmif)
pmif->timings[2] = pmif->timings[3] = value2;
}
+static int on_media_bay(pmac_ide_hwif_t *pmif)
+{
+ return pmif->mdev && pmif->mdev->media_bay != NULL;
+}
+
/* Suspend call back, should be called after the child devices
* have actually been suspended
*/
@@ -866,7 +869,7 @@ static int pmac_ide_do_suspend(pmac_ide_hwif_t *pmif)
disable_irq(pmif->irq);
/* The media bay will handle itself just fine */
- if (pmif->mediabay)
+ if (on_media_bay(pmif))
return 0;
/* Kauai has bus control FCRs directly here */
@@ -889,7 +892,7 @@ static int pmac_ide_do_suspend(pmac_ide_hwif_t *pmif)
static int pmac_ide_do_resume(pmac_ide_hwif_t *pmif)
{
/* Hard reset & re-enable controller (do we really need to reset ? -BenH) */
- if (!pmif->mediabay) {
+ if (!on_media_bay(pmif)) {
ppc_md.feature_call(PMAC_FTR_IDE_RESET, pmif->node, pmif->aapl_bus_id, 1);
ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, pmif->node, pmif->aapl_bus_id, 1);
msleep(10);
@@ -950,13 +953,11 @@ static void pmac_ide_init_dev(ide_drive_t *drive)
pmac_ide_hwif_t *pmif =
(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
- if (pmif->mediabay) {
-#ifdef CONFIG_PMAC_MEDIABAY
- if (check_media_bay_by_base(pmif->regbase, MB_CD) == 0) {
+ if (on_media_bay(pmif)) {
+ if (check_media_bay(pmif->mdev->media_bay) == MB_CD) {
drive->dev_flags &= ~IDE_DFLAG_NOPROBE;
return;
}
-#endif
drive->dev_flags |= IDE_DFLAG_NOPROBE;
}
}
@@ -1072,26 +1073,23 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif,
writel(KAUAI_FCR_UATA_MAGIC |
KAUAI_FCR_UATA_RESET_N |
KAUAI_FCR_UATA_ENABLE, pmif->kauai_fcr);
-
- pmif->mediabay = 0;
/* Make sure we have sane timings */
sanitize_timings(pmif);
+ /* If we are on a media bay, wait for it to settle and lock it */
+ if (pmif->mdev)
+ lock_media_bay(pmif->mdev->media_bay);
+
host = ide_host_alloc(&d, hws, 1);
- if (host == NULL)
- return -ENOMEM;
- hwif = host->ports[0];
+ if (host == NULL) {
+ rc = -ENOMEM;
+ goto bail;
+ }
+ hwif = pmif->hwif = host->ports[0];
-#ifndef CONFIG_PPC64
- /* XXX FIXME: Media bay stuff need re-organizing */
- if (np->parent && np->parent->name
- && strcasecmp(np->parent->name, "media-bay") == 0) {
-#ifdef CONFIG_PMAC_MEDIABAY
- media_bay_set_ide_infos(np->parent, pmif->regbase, pmif->irq,
- hwif);
-#endif /* CONFIG_PMAC_MEDIABAY */
- pmif->mediabay = 1;
+ if (on_media_bay(pmif)) {
+ /* Fixup bus ID for media bay */
if (!bidp)
pmif->aapl_bus_id = 1;
} else if (pmif->kind == controller_ohare) {
@@ -1100,9 +1098,7 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif,
* units, I keep the old way
*/
ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, np, 0, 1);
- } else
-#endif
- {
+ } else {
/* This is necessary to enable IDE when net-booting */
ppc_md.feature_call(PMAC_FTR_IDE_RESET, np, pmif->aapl_bus_id, 1);
ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, np, pmif->aapl_bus_id, 1);
@@ -1112,17 +1108,21 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif,
}
printk(KERN_INFO DRV_NAME ": Found Apple %s controller (%s), "
- "bus ID %d%s, irq %d\n", model_name[pmif->kind],
- pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id,
- pmif->mediabay ? " (mediabay)" : "", hw->irq);
+ "bus ID %d%s, irq %d\n", model_name[pmif->kind],
+ pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id,
+ on_media_bay(pmif) ? " (mediabay)" : "", hw->irq);
rc = ide_host_register(host, &d, hws);
- if (rc) {
- ide_host_free(host);
- return rc;
- }
+ if (rc)
+ pmif->hwif = NULL;
- return 0;
+ if (pmif->mdev)
+ unlock_media_bay(pmif->mdev->media_bay);
+
+ bail:
+ if (rc && host)
+ ide_host_free(host);
+ return rc;
}
static void __devinit pmac_ide_init_ports(struct ide_hw *hw, unsigned long base)
@@ -1362,6 +1362,25 @@ pmac_ide_pci_resume(struct pci_dev *pdev)
return rc;
}
+#ifdef CONFIG_PMAC_MEDIABAY
+static void pmac_ide_macio_mb_event(struct macio_dev* mdev, int mb_state)
+{
+ pmac_ide_hwif_t *pmif =
+ (pmac_ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev);
+
+ switch(mb_state) {
+ case MB_CD:
+ if (!pmif->hwif->present)
+ ide_port_scan(pmif->hwif);
+ break;
+ default:
+ if (pmif->hwif->present)
+ ide_port_unregister_devices(pmif->hwif);
+ }
+}
+#endif /* CONFIG_PMAC_MEDIABAY */
+
+
static struct of_device_id pmac_ide_macio_match[] =
{
{
@@ -1386,6 +1405,9 @@ static struct macio_driver pmac_ide_macio_driver =
.probe = pmac_ide_macio_attach,
.suspend = pmac_ide_macio_suspend,
.resume = pmac_ide_macio_resume,
+#ifdef CONFIG_PMAC_MEDIABAY
+ .mediabay_event = pmac_ide_macio_mb_event,
+#endif
};
static const struct pci_device_id pmac_ide_pci_match[] = {
diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c
index 029ad8ce8a7e..08002b88f342 100644
--- a/drivers/macintosh/mediabay.c
+++ b/drivers/macintosh/mediabay.c
@@ -33,15 +33,6 @@
#include <linux/adb.h>
#include <linux/pmu.h>
-
-#define MB_DEBUG
-
-#ifdef MB_DEBUG
-#define MBDBG(fmt, arg...) printk(KERN_INFO fmt , ## arg)
-#else
-#define MBDBG(fmt, arg...) do { } while (0)
-#endif
-
#define MB_FCR32(bay, r) ((bay)->base + ((r) >> 2))
#define MB_FCR8(bay, r) (((volatile u8 __iomem *)((bay)->base)) + (r))
@@ -76,28 +67,14 @@ struct media_bay_info {
int index;
int cached_gpio;
int sleeping;
+ int user_lock;
struct mutex lock;
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
- ide_hwif_t *cd_port;
- void __iomem *cd_base;
- int cd_irq;
- int cd_retry;
-#endif
-#if defined(CONFIG_BLK_DEV_IDE_PMAC)
- int cd_index;
-#endif
};
#define MAX_BAYS 2
static struct media_bay_info media_bays[MAX_BAYS];
-int media_bay_count = 0;
-
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
-/* check the busy bit in the media-bay ide interface
- (assumes the media-bay contains an ide device) */
-#define MB_IDE_READY(i) ((readb(media_bays[i].cd_base + 0x70) & 0x80) == 0)
-#endif
+static int media_bay_count = 0;
/*
* Wait that number of ms between each step in normal polling mode
@@ -130,21 +107,11 @@ int media_bay_count = 0;
/*
* Wait this many ticks after an IDE device (e.g. CD-ROM) is inserted
- * (or until the device is ready) before waiting for busy bit to disappear
+ * (or until the device is ready) before calling into the driver
*/
#define MB_IDE_WAIT 1000
/*
- * Timeout waiting for busy bit of an IDE device to go down
- */
-#define MB_IDE_TIMEOUT 5000
-
-/*
- * Max retries of the full power up/down sequence for an IDE device
- */
-#define MAX_CD_RETRIES 3
-
-/*
* States of a media bay
*/
enum {
@@ -153,7 +120,6 @@ enum {
mb_enabling_bay, /* enable bits set, waiting MB_RESET_DELAY */
mb_resetting, /* reset bit unset, waiting MB_SETUP_DELAY */
mb_ide_resetting, /* IDE reset bit unser, waiting MB_IDE_WAIT */
- mb_ide_waiting, /* Waiting for BUSY bit to go away until MB_IDE_TIMEOUT */
mb_up, /* Media bay full */
mb_powering_down /* Powering down (avoid too fast down/up) */
};
@@ -373,12 +339,12 @@ static inline void set_mb_power(struct media_bay_info* bay, int onoff)
if (onoff) {
bay->ops->power(bay, 1);
bay->state = mb_powering_up;
- MBDBG("mediabay%d: powering up\n", bay->index);
+ pr_debug("mediabay%d: powering up\n", bay->index);
} else {
/* Make sure everything is powered down & disabled */
bay->ops->power(bay, 0);
bay->state = mb_powering_down;
- MBDBG("mediabay%d: powering down\n", bay->index);
+ pr_debug("mediabay%d: powering down\n", bay->index);
}
bay->timer = msecs_to_jiffies(MB_POWER_DELAY);
}
@@ -387,107 +353,118 @@ static void poll_media_bay(struct media_bay_info* bay)
{
int id = bay->ops->content(bay);
- if (id == bay->last_value) {
- if (id != bay->content_id) {
- bay->value_count += msecs_to_jiffies(MB_POLL_DELAY);
- if (bay->value_count >= msecs_to_jiffies(MB_STABLE_DELAY)) {
- /* If the device type changes without going thru
- * "MB_NO", we force a pass by "MB_NO" to make sure
- * things are properly reset
- */
- if ((id != MB_NO) && (bay->content_id != MB_NO)) {
- id = MB_NO;
- MBDBG("mediabay%d: forcing MB_NO\n", bay->index);
- }
- MBDBG("mediabay%d: switching to %d\n", bay->index, id);
- set_mb_power(bay, id != MB_NO);
- bay->content_id = id;
- if (id == MB_NO) {
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
- bay->cd_retry = 0;
-#endif
- printk(KERN_INFO "media bay %d is empty\n", bay->index);
- }
- }
- }
- } else {
+ static char *mb_content_types[] = {
+ "a floppy drive",
+ "a floppy drive",
+ "an unsuported audio device",
+ "an ATA device",
+ "an unsupported PCI device",
+ "an unknown device",
+ };
+
+ if (id != bay->last_value) {
bay->last_value = id;
bay->value_count = 0;
+ return;
+ }
+ if (id == bay->content_id)
+ return;
+
+ bay->value_count += msecs_to_jiffies(MB_POLL_DELAY);
+ if (bay->value_count >= msecs_to_jiffies(MB_STABLE_DELAY)) {
+ /* If the device type changes without going thru
+ * "MB_NO", we force a pass by "MB_NO" to make sure
+ * things are properly reset
+ */
+ if ((id != MB_NO) && (bay->content_id != MB_NO)) {
+ id = MB_NO;
+ pr_debug("mediabay%d: forcing MB_NO\n", bay->index);
+ }
+ pr_debug("mediabay%d: switching to %d\n", bay->index, id);
+ set_mb_power(bay, id != MB_NO);
+ bay->content_id = id;
+ if (id >= MB_NO || id < 0)
+ printk(KERN_INFO "mediabay%d: Bay is now empty\n", bay->index);
+ else
+ printk(KERN_INFO "mediabay%d: Bay contains %s\n",
+ bay->index, mb_content_types[id]);
}
}
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
-int check_media_bay(struct device_node *which_bay, int what)
+int check_media_bay(struct macio_dev *baydev)
{
- int i;
+ struct media_bay_info* bay;
+ int id;
- for (i=0; i<media_bay_count; i++)
- if (media_bays[i].mdev && which_bay == media_bays[i].mdev->ofdev.node) {
- if ((what == media_bays[i].content_id) && media_bays[i].state == mb_up)
- return 0;
- media_bays[i].cd_index = -1;
- return -EINVAL;
- }
- return -ENODEV;
+ if (baydev == NULL)
+ return MB_NO;
+
+ /* This returns an instant snapshot, not locking, sine
+ * we may be called with the bay lock held. The resulting
+ * fuzzyness of the result if called at the wrong time is
+ * not actually a huge deal
+ */
+ bay = macio_get_drvdata(baydev);
+ if (bay == NULL)
+ return MB_NO;
+ id = bay->content_id;
+ if (bay->state != mb_up)
+ return MB_NO;
+ if (id == MB_FD1)
+ return MB_FD;
+ return id;
}
-EXPORT_SYMBOL(check_media_bay);
+EXPORT_SYMBOL_GPL(check_media_bay);
-int check_media_bay_by_base(unsigned long base, int what)
+void lock_media_bay(struct macio_dev *baydev)
{
- int i;
-
- for (i=0; i<media_bay_count; i++)
- if (media_bays[i].mdev && base == (unsigned long) media_bays[i].cd_base) {
- if ((what == media_bays[i].content_id) && media_bays[i].state == mb_up)
- return 0;
- media_bays[i].cd_index = -1;
- return -EINVAL;
- }
+ struct media_bay_info* bay;
- return -ENODEV;
+ if (baydev == NULL)
+ return;
+ bay = macio_get_drvdata(baydev);
+ if (bay == NULL)
+ return;
+ mutex_lock(&bay->lock);
+ bay->user_lock = 1;
}
-EXPORT_SYMBOL_GPL(check_media_bay_by_base);
+EXPORT_SYMBOL_GPL(lock_media_bay);
-int media_bay_set_ide_infos(struct device_node* which_bay, unsigned long base,
- int irq, ide_hwif_t *hwif)
+void unlock_media_bay(struct macio_dev *baydev)
{
- int i;
+ struct media_bay_info* bay;
- for (i=0; i<media_bay_count; i++) {
- struct media_bay_info* bay = &media_bays[i];
-
- if (bay->mdev && which_bay == bay->mdev->ofdev.node) {
- int timeout = 5000, index = hwif->index;
-
- mutex_lock(&bay->lock);
-
- bay->cd_port = hwif;
- bay->cd_base = (void __iomem *) base;
- bay->cd_irq = irq;
-
- if ((MB_CD != bay->content_id) || bay->state != mb_up) {
- mutex_unlock(&bay->lock);
- return 0;
- }
- printk(KERN_DEBUG "Registered ide%d for media bay %d\n", index, i);
- do {
- if (MB_IDE_READY(i)) {
- bay->cd_index = index;
- mutex_unlock(&bay->lock);
- return 0;
- }
- mdelay(1);
- } while(--timeout);
- printk(KERN_DEBUG "Timeount waiting IDE in bay %d\n", i);
- mutex_unlock(&bay->lock);
- return -ENODEV;
- }
+ if (baydev == NULL)
+ return;
+ bay = macio_get_drvdata(baydev);
+ if (bay == NULL)
+ return;
+ if (bay->user_lock) {
+ bay->user_lock = 0;
+ mutex_unlock(&bay->lock);
}
+}
+EXPORT_SYMBOL_GPL(unlock_media_bay);
- return -ENODEV;
+static int mb_broadcast_hotplug(struct device *dev, void *data)
+{
+ struct media_bay_info* bay = data;
+ struct macio_dev *mdev;
+ struct macio_driver *drv;
+ int state;
+
+ if (dev->bus != &macio_bus_type)
+ return 0;
+
+ state = bay->state == mb_up ? bay->content_id : MB_NO;
+ if (state == MB_FD1)
+ state = MB_FD;
+ mdev = to_macio_device(dev);
+ drv = to_macio_driver(dev->driver);
+ if (dev->driver && drv->mediabay_event)
+ drv->mediabay_event(mdev, state);
+ return 0;
}
-EXPORT_SYMBOL_GPL(media_bay_set_ide_infos);
-#endif /* CONFIG_BLK_DEV_IDE_PMAC */
static void media_bay_step(int i)
{
@@ -497,8 +474,8 @@ static void media_bay_step(int i)
if (bay->state != mb_powering_down)
poll_media_bay(bay);
- /* If timer expired or polling IDE busy, run state machine */
- if ((bay->state != mb_ide_waiting) && (bay->timer != 0)) {
+ /* If timer expired run state machine */
+ if (bay->timer != 0) {
bay->timer -= msecs_to_jiffies(MB_POLL_DELAY);
if (bay->timer > 0)
return;
@@ -508,100 +485,50 @@ static void media_bay_step(int i)
switch(bay->state) {
case mb_powering_up:
if (bay->ops->setup_bus(bay, bay->last_value) < 0) {
- MBDBG("mediabay%d: device not supported (kind:%d)\n", i, bay->content_id);
+ pr_debug("mediabay%d: device not supported (kind:%d)\n",
+ i, bay->content_id);
set_mb_power(bay, 0);
break;
}
bay->timer = msecs_to_jiffies(MB_RESET_DELAY);
bay->state = mb_enabling_bay;
- MBDBG("mediabay%d: enabling (kind:%d)\n", i, bay->content_id);
+ pr_debug("mediabay%d: enabling (kind:%d)\n", i, bay->content_id);
break;
case mb_enabling_bay:
bay->ops->un_reset(bay);
bay->timer = msecs_to_jiffies(MB_SETUP_DELAY);
bay->state = mb_resetting;
- MBDBG("mediabay%d: waiting reset (kind:%d)\n", i, bay->content_id);
+ pr_debug("mediabay%d: releasing bay reset (kind:%d)\n",
+ i, bay->content_id);
break;
case mb_resetting:
if (bay->content_id != MB_CD) {
- MBDBG("mediabay%d: bay is up (kind:%d)\n", i, bay->content_id);
+ pr_debug("mediabay%d: bay is up (kind:%d)\n", i,
+ bay->content_id);
bay->state = mb_up;
+ device_for_each_child(&bay->mdev->ofdev.dev,
+ bay, mb_broadcast_hotplug);
break;
}
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
- MBDBG("mediabay%d: waiting IDE reset (kind:%d)\n", i, bay->content_id);
+ pr_debug("mediabay%d: releasing ATA reset (kind:%d)\n",
+ i, bay->content_id);
bay->ops->un_reset_ide(bay);
bay->timer = msecs_to_jiffies(MB_IDE_WAIT);
bay->state = mb_ide_resetting;
-#else
- printk(KERN_DEBUG "media-bay %d is ide (not compiled in kernel)\n", i);
- set_mb_power(bay, 0);
-#endif /* CONFIG_BLK_DEV_IDE_PMAC */
break;
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
+
case mb_ide_resetting:
- bay->timer = msecs_to_jiffies(MB_IDE_TIMEOUT);
- bay->state = mb_ide_waiting;
- MBDBG("mediabay%d: waiting IDE ready (kind:%d)\n", i, bay->content_id);
+ pr_debug("mediabay%d: bay is up (kind:%d)\n", i, bay->content_id);
+ bay->state = mb_up;
+ device_for_each_child(&bay->mdev->ofdev.dev,
+ bay, mb_broadcast_hotplug);
break;
- case mb_ide_waiting:
- if (bay->cd_base == NULL) {
- bay->timer = 0;
- bay->state = mb_up;
- MBDBG("mediabay%d: up before IDE init\n", i);
- break;
- } else if (MB_IDE_READY(i)) {
- bay->timer = 0;
- bay->state = mb_up;
- if (bay->cd_index < 0) {
- printk("mediabay %d, registering IDE...\n", i);
- pmu_suspend();
- ide_port_scan(bay->cd_port);
- if (bay->cd_port->present)
- bay->cd_index = bay->cd_port->index;
- pmu_resume();
- }
- if (bay->cd_index == -1) {
- /* We eventually do a retry */
- bay->cd_retry++;
- printk("IDE register error\n");
- set_mb_power(bay, 0);
- } else {
- printk(KERN_DEBUG "media-bay %d is ide%d\n", i, bay->cd_index);
- MBDBG("mediabay %d IDE ready\n", i);
- }
- break;
- } else if (bay->timer > 0)
- bay->timer -= msecs_to_jiffies(MB_POLL_DELAY);
- if (bay->timer <= 0) {
- printk("\nIDE Timeout in bay %d !, IDE state is: 0x%02x\n",
- i, readb(bay->cd_base + 0x70));
- MBDBG("mediabay%d: nIDE Timeout !\n", i);
- set_mb_power(bay, 0);
- bay->timer = 0;
- }
- break;
-#endif /* CONFIG_BLK_DEV_IDE_PMAC */
+
case mb_powering_down:
bay->state = mb_empty;
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
- if (bay->cd_index >= 0) {
- printk(KERN_DEBUG "Unregistering mb %d ide, index:%d\n", i,
- bay->cd_index);
- ide_port_unregister_devices(bay->cd_port);
- bay->cd_index = -1;
- }
- if (bay->cd_retry) {
- if (bay->cd_retry > MAX_CD_RETRIES) {
- /* Should add an error sound (sort of beep in dmasound) */
- printk("\nmedia-bay %d, IDE device badly inserted or unrecognised\n", i);
- } else {
- /* Force a new power down/up sequence */
- bay->content_id = MB_NO;
- }
- }
-#endif /* CONFIG_BLK_DEV_IDE_PMAC */
- MBDBG("mediabay%d: end of power down\n", i);
+ device_for_each_child(&bay->mdev->ofdev.dev,
+ bay, mb_broadcast_hotplug);
+ pr_debug("mediabay%d: end of power down\n", i);
break;
}
}
@@ -676,11 +603,6 @@ static int __devinit media_bay_attach(struct macio_dev *mdev, const struct of_de
bay->last_value = bay->ops->content(bay);
bay->value_count = msecs_to_jiffies(MB_STABLE_DELAY);
bay->state = mb_empty;
- do {
- msleep(MB_POLL_DELAY);
- media_bay_step(i);
- } while((bay->state != mb_empty) &&
- (bay->state != mb_up));
/* Mark us ready by filling our mdev data */
macio_set_drvdata(mdev, bay);
@@ -725,7 +647,7 @@ static int media_bay_resume(struct macio_dev *mdev)
set_mb_power(bay, 0);
msleep(MB_POWER_DELAY);
if (bay->ops->content(bay) != bay->content_id) {
- printk("mediabay%d: content changed during sleep...\n", bay->index);
+ printk("mediabay%d: Content changed during sleep...\n", bay->index);
mutex_unlock(&bay->lock);
return 0;
}
@@ -733,9 +655,6 @@ static int media_bay_resume(struct macio_dev *mdev)
bay->last_value = bay->content_id;
bay->value_count = msecs_to_jiffies(MB_STABLE_DELAY);
bay->timer = msecs_to_jiffies(MB_POWER_DELAY);
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
- bay->cd_retry = 0;
-#endif
do {
msleep(MB_POLL_DELAY);
media_bay_step(bay->index);
@@ -823,9 +742,6 @@ static int __init media_bay_init(void)
for (i=0; i<MAX_BAYS; i++) {
memset((char *)&media_bays[i], 0, sizeof(struct media_bay_info));
media_bays[i].content_id = -1;
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
- media_bays[i].cd_index = -1;
-#endif
}
if (!machine_is(powermac))
return 0;