diff options
226 files changed, 31838 insertions, 7714 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index a24631f4eab1..0d6f5119a6da 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1173,6 +1173,8 @@ S: Orphan CRIS PORT P: Mikael Starvik M: starvik@axis.com +P: Jesper Nilsson +M: jesper.nilsson@axis.com L: dev-etrax@axis.com W: http://developer.axis.com S: Maintained diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig index ff078e60e76d..8456bc8efb7c 100644 --- a/arch/cris/Kconfig +++ b/arch/cris/Kconfig @@ -13,10 +13,6 @@ config ZONE_DMA bool default y -config NO_DMA - bool - default y - config RWSEM_GENERIC_SPINLOCK bool default y @@ -24,6 +20,10 @@ config RWSEM_GENERIC_SPINLOCK config RWSEM_XCHGADD_ALGORITHM bool +config GENERIC_IOMAP + bool + default y + config ARCH_HAS_ILOG2_U32 bool default n @@ -44,13 +44,13 @@ config GENERIC_CALIBRATE_DELAY bool default y -config IRQ_PER_CPU - bool - default y - config NO_IOPORT def_bool y +config FORCE_MAX_ZONEORDER + int + default 6 + config CRIS bool default y @@ -97,17 +97,15 @@ config ETRAX_FAST_TIMER timers). This is needed if CONFIG_ETRAX_SERIAL_FAST_TIMER is enabled. -config PREEMPT - bool "Preemptible Kernel" +config ETRAX_KMALLOCED_MODULES + bool "Enable module allocation with kmalloc" help - This option reduces the latency of the kernel when reacting to - real-time or interactive events by allowing a low priority process to - be preempted even if it is in kernel mode executing a system call. - This allows applications to run more reliably even when the system is - under load. + Enable module allocation with kmalloc instead of vmalloc. + +config OOM_REBOOT + bool "Enable reboot at out of memory" - Say Y here if you are building a kernel for a desktop, embedded - or real-time system. Say N if you are unsure. +source "kernel/Kconfig.preempt" source mm/Kconfig @@ -134,24 +132,124 @@ config SVINTO_SIM help Support the xsim ETRAX Simulator. +config ETRAXFS + bool "ETRAX-FS-V32" + help + Support CRIS V32. + +config CRIS_MACH_ARTPEC3 + bool "ARTPEC-3" + help + Support Axis ARTPEC-3. + endchoice +config ETRAX_VCS_SIM + bool "VCS Simulator" + help + Setup hardware to be run in the VCS simulator. + config ETRAX_ARCH_V10 bool default y if ETRAX100LX || ETRAX100LX_V2 default n if !(ETRAX100LX || ETRAX100LX_V2) +config ETRAX_ARCH_V32 + bool + default y if (ETRAXFS || CRIS_MACH_ARTPEC3) + default n if !(ETRAXFS || CRIS_MACH_ARTPEC3) + config ETRAX_DRAM_SIZE int "DRAM size (dec, in MB)" default "8" help Size of DRAM (decimal in MB) typically 2, 8 or 16. +config ETRAX_VMEM_SIZE + int "Video memory size (dec, in MB)" + depends on ETRAX_ARCH_V32 && !ETRAXFS + default 8 if !ETRAXFS + help + Size of Video accessible memory (decimal, in MB). + config ETRAX_FLASH_BUSWIDTH - int "Buswidth of flash in bytes" + int "Buswidth of NOR flash in bytes" default "2" help - Width in bytes of the Flash bus (1, 2 or 4). Is usually 2. + Width in bytes of the NOR Flash bus (1, 2 or 4). Is usually 2. + +config ETRAX_NANDFLASH_BUSWIDTH + int "Buswidth of NAND flash in bytes" + default "1" + help + Width in bytes of the NAND flash (1 or 2). + +config ETRAX_FLASH1_SIZE + int "FLASH1 size (dec, in MB. 0 = Unknown)" + default "0" + +choice + prompt "Product debug-port" + default ETRAX_DEBUG_PORT0 + +config ETRAX_DEBUG_PORT0 + bool "Serial-0" + help + Choose a serial port for the ETRAX debug console. Default to + port 0. + +config ETRAX_DEBUG_PORT1 + bool "Serial-1" + help + Use serial port 1 for the console. + +config ETRAX_DEBUG_PORT2 + bool "Serial-2" + help + Use serial port 2 for the console. + +config ETRAX_DEBUG_PORT3 + bool "Serial-3" + help + Use serial port 3 for the console. + +config ETRAX_DEBUG_PORT_NULL + bool "disabled" + help + Disable serial-port debugging. + +endchoice + +choice + prompt "Kernel GDB port" + depends on ETRAX_KGDB + default ETRAX_KGDB_PORT0 + help + Choose a serial port for kernel debugging. NOTE: This port should + not be enabled under Drivers for built-in interfaces (as it has its + own initialization code) and should not be the same as the debug port. + +config ETRAX_KGDB_PORT0 + bool "Serial-0" + help + Use serial port 0 for kernel debugging. + +config ETRAX_KGDB_PORT1 + bool "Serial-1" + help + Use serial port 1 for kernel debugging. + +config ETRAX_KGDB_PORT2 + bool "Serial-2" + help + Use serial port 2 for kernel debugging. + +config ETRAX_KGDB_PORT3 + bool "Serial-3" + help + Use serial port 3 for kernel debugging. + +endchoice source arch/cris/arch-v10/Kconfig source arch/cris/arch-v32/Kconfig @@ -165,6 +263,387 @@ menu "Drivers for built-in interfaces" source arch/cris/arch-v10/drivers/Kconfig source arch/cris/arch-v32/drivers/Kconfig +config ETRAX_AXISFLASHMAP + bool "Axis flash-map support" + select MTD + select MTD_CFI + select MTD_CFI_AMDSTD + select MTD_JEDECPROBE if ETRAX_ARCH_V32 + select MTD_CHAR + select MTD_BLOCK + select MTD_PARTITIONS + select MTD_CONCAT + select MTD_COMPLEX_MAPPINGS + help + This option enables MTD mapping of flash devices. Needed to use + flash memories. If unsure, say Y. + +config ETRAX_RTC + bool "Real Time Clock support" + depends on ETRAX_I2C + help + Enables drivers for the Real-Time Clock battery-backed chips on + some products. The kernel reads the time when booting, and + the date can be set using ioctl(fd, RTC_SET_TIME, &rt) with rt a + rtc_time struct (see <file:include/asm-cris/rtc.h>) on the /dev/rtc + device. You can check the time with cat /proc/rtc, but + normal time reading should be done using libc function time and + friends. + +choice + prompt "RTC chip" + depends on ETRAX_RTC + default ETRAX_PCF8563 if ETRAX_ARCH_V32 + default ETRAX_DS1302 if ETRAX_ARCH_V10 + +config ETRAX_DS1302 + depends on ETRAX_ARCH_V10 + bool "DS1302" + help + Enables the driver for the DS1302 Real-Time Clock battery-backed + chip on some products. + +config ETRAX_PCF8563 + bool "PCF8563" + help + Enables the driver for the PCF8563 Real-Time Clock battery-backed + chip on some products. + +endchoice + +config ETRAX_SYNCHRONOUS_SERIAL + bool "Synchronous serial-port support" + help + Select this to enable the synchronous serial port driver. + +config ETRAX_SYNCHRONOUS_SERIAL_PORT0 + bool "Synchronous serial port 0 enabled" + depends on ETRAX_SYNCHRONOUS_SERIAL + help + Enabled synchronous serial port 0. + +config ETRAX_SYNCHRONOUS_SERIAL0_DMA + bool "Enable DMA on synchronous serial port 0." + depends on ETRAX_SYNCHRONOUS_SERIAL_PORT0 + help + A synchronous serial port can run in manual or DMA mode. + Selecting this option will make it run in DMA mode. + +config ETRAX_SYNCHRONOUS_SERIAL_PORT1 + bool "Synchronous serial port 1 enabled" + depends on ETRAX_SYNCHRONOUS_SERIAL && (ETRAXFS || ETRAX_ARCH_V10) + help + Enabled synchronous serial port 1. + +config ETRAX_SYNCHRONOUS_SERIAL1_DMA + bool "Enable DMA on synchronous serial port 1." + depends on ETRAX_SYNCHRONOUS_SERIAL_PORT1 + help + A synchronous serial port can run in manual or DMA mode. + Selecting this option will make it run in DMA mode. + +choice + prompt "Network LED behavior" + depends on ETRAX_ETHERNET + default ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY + +config ETRAX_NETWORK_LED_ON_WHEN_LINK + bool "LED_on_when_link" + help + Selecting LED_on_when_link will light the LED when there is a + connection and will flash off when there is activity. + + Selecting LED_on_when_activity will light the LED only when + there is activity. + + This setting will also affect the behaviour of other activity LEDs + e.g. Bluetooth. + +config ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY + bool "LED_on_when_activity" + help + Selecting LED_on_when_link will light the LED when there is a + connection and will flash off when there is activity. + + Selecting LED_on_when_activity will light the LED only when + there is activity. + + This setting will also affect the behaviour of other activity LEDs + e.g. Bluetooth. + +endchoice + +choice + prompt "Ser0 DMA out channel" + depends on ETRAX_SERIAL_PORT0 + default ETRAX_SERIAL_PORT0_DMA6_OUT if ETRAX_ARCH_V32 + default ETRAX_SERIAL_PORT0_NO_DMA_OUT if ETRAX_ARCH_V10 + +config ETRAX_SERIAL_PORT0_NO_DMA_OUT + bool "Ser0 uses no DMA for output" + help + Do not use DMA for ser0 output. + +config ETRAX_SERIAL_PORT0_DMA6_OUT + bool "Ser0 uses DMA6 for output" + depends on ETRAXFS + help + Enables the DMA6 output channel for ser0 (ttyS0). + If you do not enable DMA, an interrupt for each character will be + used when transmitting data. + Normally you want to use DMA, unless you use the DMA channel for + something else. + +config ETRAX_SERIAL_PORT0_DMA0_OUT + bool "Ser0 uses DMA0 for output" + depends on CRIS_MACH_ARTPEC3 + help + Enables the DMA0 output channel for ser0 (ttyS0). + If you do not enable DMA, an interrupt for each character will be + used when transmitting data. + Normally you want to use DMA, unless you use the DMA channel for + something else. + +endchoice + +choice + prompt "Ser0 DMA in channel " + depends on ETRAX_SERIAL_PORT0 + default ETRAX_SERIAL_PORT0_NO_DMA_IN if ETRAX_ARCH_V32 + default ETRAX_SERIAL_PORT0_DMA7_IN if ETRAX_ARCH_V10 + help + What DMA channel to use for ser0. + +config ETRAX_SERIAL_PORT0_NO_DMA_IN + bool "Ser0 uses no DMA for input" + help + Do not use DMA for ser0 input. + +config ETRAX_SERIAL_PORT0_DMA7_IN + bool "Ser0 uses DMA7 for input" + depends on ETRAXFS + help + Enables the DMA7 input channel for ser0 (ttyS0). + If you do not enable DMA, an interrupt for each character will be + used when receiving data. + Normally you want to use DMA, unless you use the DMA channel for + something else. + +config ETRAX_SERIAL_PORT0_DMA1_IN + bool "Ser0 uses DMA1 for input" + depends on CRIS_MACH_ARTPEC3 + help + Enables the DMA1 input channel for ser0 (ttyS0). + If you do not enable DMA, an interrupt for each character will be + used when receiveing data. + Normally you want to use DMA, unless you use the DMA channel for + something else. + +endchoice + +choice + prompt "Ser1 DMA in channel " + depends on ETRAX_SERIAL_PORT1 + default ETRAX_SERIAL_PORT1_NO_DMA_IN if ETRAX_ARCH_V32 + default ETRAX_SERIAL_PORT1_DMA9_IN if ETRAX_ARCH_V10 + help + What DMA channel to use for ser1. + +config ETRAX_SERIAL_PORT1_NO_DMA_IN + bool "Ser1 uses no DMA for input" + help + Do not use DMA for ser1 input. + +config ETRAX_SERIAL_PORT1_DMA5_IN + bool "Ser1 uses DMA5 for input" + depends on ETRAX_ARCH_V32 + help + Enables the DMA5 input channel for ser1 (ttyS1). + If you do not enable DMA, an interrupt for each character will be + used when receiving data. + Normally you want this on, unless you use the DMA channel for + something else. + +config ETRAX_SERIAL_PORT1_DMA9_IN + depends on ETRAX_ARCH_V10 + bool "Ser1 uses DMA9 for input" + +endchoice + + +choice + prompt "Ser1 DMA out channel" + depends on ETRAX_SERIAL_PORT1 + default ETRAX_SERIAL_PORT1_NO_DMA_OUT if ETRAX_ARCH_V32 + default ETRAX_SERIAL_PORT1_DMA8_OUT if ETRAX_ARCH_V10 + help + What DMA channel to use for ser1. + +config ETRAX_SERIAL_PORT1_NO_DMA_OUT + bool "Ser1 uses no DMA for output" + help + Do not use DMA for ser1 output. + +config ETRAX_SERIAL_PORT1_DMA8_OUT + depends on ETRAX_ARCH_V10 + bool "Ser1 uses DMA8 for output" + +config ETRAX_SERIAL_PORT1_DMA4_OUT + depends on ETRAX_ARCH_V32 + bool "Ser1 uses DMA4 for output" + help + Enables the DMA4 output channel for ser1 (ttyS1). + If you do not enable DMA, an interrupt for each character will be + used when transmitting data. + Normally you want this on, unless you use the DMA channel for + something else. + +endchoice + +choice + prompt "Ser2 DMA out channel" + depends on ETRAX_SERIAL_PORT2 + default ETRAX_SERIAL_PORT2_NO_DMA_OUT if ETRAX_ARCH_V32 + default ETRAX_SERIAL_PORT2_DMA2_OUT if ETRAX_ARCH_V10 + +config ETRAX_SERIAL_PORT2_NO_DMA_OUT + bool "Ser2 uses no DMA for output" + help + Do not use DMA for ser2 output. + +config ETRAX_SERIAL_PORT2_DMA2_OUT + bool "Ser2 uses DMA2 for output" + depends on ETRAXFS || ETRAX_ARCH_V10 + help + Enables the DMA2 output channel for ser2 (ttyS2). + If you do not enable DMA, an interrupt for each character will be + used when transmitting data. + Normally you want to use DMA, unless you use the DMA channel for + something else. + +config ETRAX_SERIAL_PORT2_DMA6_OUT + bool "Ser2 uses DMA6 for output" + depends on CRIS_MACH_ARTPEC3 + help + Enables the DMA6 output channel for ser2 (ttyS2). + If you do not enable DMA, an interrupt for each character will be + used when transmitting data. + Normally you want to use DMA, unless you use the DMA channel for + something else. + +endchoice + +choice + prompt "Ser2 DMA in channel" + depends on ETRAX_SERIAL_PORT2 + default ETRAX_SERIAL_PORT2_NO_DMA_IN if ETRAX_ARCH_V32 + default ETRAX_SERIAL_PORT2_DMA3_IN if ETRAX_ARCH_V10 + help + What DMA channel to use for ser2. + +config ETRAX_SERIAL_PORT2_NO_DMA_IN + bool "Ser2 uses no DMA for input" + help + Do not use DMA for ser2 input. + +config ETRAX_SERIAL_PORT2_DMA3_IN + bool "Ser2 uses DMA3 for input" + depends on ETRAXFS || ETRAX_ARCH_V10 + help + Enables the DMA3 input channel for ser2 (ttyS2). + If you do not enable DMA, an interrupt for each character will be + used when receiving data. + Normally you want to use DMA, unless you use the DMA channel for + something else. + +config ETRAX_SERIAL_PORT2_DMA7_IN + bool "Ser2 uses DMA7 for input" + depends on CRIS_MACH_ARTPEC3 + help + Enables the DMA7 input channel for ser2 (ttyS2). + If you do not enable DMA, an interrupt for each character will be + used when receiveing data. + Normally you want to use DMA, unless you use the DMA channel for + something else. + +endchoice + +choice + prompt "Ser3 DMA in channel" + depends on ETRAX_SERIAL_PORT3 + default ETRAX_SERIAL_PORT3_NO_DMA_IN if ETRAX_ARCH_V32 + default ETRAX_SERIAL_PORT3_DMA5_IN if ETRAX_ARCH_V10 + help + What DMA channel to use for ser3. + +config ETRAX_SERIAL_PORT3_NO_DMA_IN + bool "Ser3 uses no DMA for input" + help + Do not use DMA for ser3 input. + +config ETRAX_SERIAL_PORT3_DMA5_IN + depends on ETRAX_ARCH_V10 + bool "DMA 5" + +config ETRAX_SERIAL_PORT3_DMA9_IN + bool "Ser3 uses DMA9 for input" + depends on ETRAXFS + help + Enables the DMA9 input channel for ser3 (ttyS3). + If you do not enable DMA, an interrupt for each character will be + used when receiving data. + Normally you want to use DMA, unless you use the DMA channel for + something else. + +config ETRAX_SERIAL_PORT3_DMA3_IN + bool "Ser3 uses DMA3 for input" + depends on CRIS_MACH_ARTPEC3 + help + Enables the DMA3 input channel for ser3 (ttyS3). + If you do not enable DMA, an interrupt for each character will be + used when receiveing data. + Normally you want to use DMA, unless you use the DMA channel for + something else. + +endchoice + +choice + prompt "Ser3 DMA out channel" + depends on ETRAX_SERIAL_PORT3 + default ETRAX_SERIAL_PORT3_NO_DMA_OUT if ETRAX_ARCH_V32 + default ETRAX_SERIAL_PORT3_DMA4_OUT if ETRAX_ARCH_V10 + +config ETRAX_SERIAL_PORT3_NO_DMA_OUT + bool "Ser3 uses no DMA for output" + help + Do not use DMA for ser3 output. + +config ETRAX_SERIAL_PORT3_DMA4_OUT + depends on ETRAX_ARCH_V10 + bool "DMA 4" + +config ETRAX_SERIAL_PORT3_DMA8_OUT + bool "Ser3 uses DMA8 for output" + depends on ETRAXFS + help + Enables the DMA8 output channel for ser3 (ttyS3). + If you do not enable DMA, an interrupt for each character will be + used when transmitting data. + Normally you want to use DMA, unless you use the DMA channel for + something else. + +config ETRAX_SERIAL_PORT3_DMA2_OUT + bool "Ser3 uses DMA2 for output" + depends on CRIS_MACH_ARTPEC3 + help + Enables the DMA2 output channel for ser3 (ttyS3). + If you do not enable DMA, an interrupt for each character will be + used when transmitting data. + Normally you want to use DMA, unless you use the DMA channel for + something else. + +endchoice + endmenu source "drivers/base/Kconfig" @@ -178,22 +657,10 @@ source "drivers/pnp/Kconfig" source "drivers/block/Kconfig" -source "drivers/md/Kconfig" - source "drivers/ide/Kconfig" -source "drivers/scsi/Kconfig" - -source "drivers/ieee1394/Kconfig" - -source "drivers/message/i2o/Kconfig" - source "drivers/net/Kconfig" -source "drivers/isdn/Kconfig" - -source "drivers/telephony/Kconfig" - source "drivers/i2c/Kconfig" source "drivers/rtc/Kconfig" @@ -205,17 +672,8 @@ source "drivers/input/Kconfig" source "drivers/char/Kconfig" -#source drivers/misc/Config.in -source "drivers/media/Kconfig" - source "fs/Kconfig" -source "sound/Kconfig" - -source "drivers/pcmcia/Kconfig" - -source "drivers/pci/Kconfig" - source "drivers/usb/Kconfig" source "arch/cris/Kconfig.debug" diff --git a/arch/cris/Makefile b/arch/cris/Makefile index e6bf00c262e0..838cd2ae03ae 100644 --- a/arch/cris/Makefile +++ b/arch/cris/Makefile @@ -1,4 +1,4 @@ -# $Id: Makefile,v 1.28 2005/03/17 10:44:37 larsv Exp $ +# # cris/Makefile # # This file is included by the global makefile so that you can add your own @@ -10,28 +10,36 @@ # License. See the file "COPYING" in the main directory of this archive # for more details. -# A bug in ld prevents us from having a (constant-value) symbol in a -# "ORIGIN =" or "LENGTH =" expression. - arch-y := v10 arch-$(CONFIG_ETRAX_ARCH_V10) := v10 arch-$(CONFIG_ETRAX_ARCH_V32) := v32 -# No config avaiable for make clean etc +# No config available for make clean etc +mach-y := fs +mach-$(CONFIG_CRIS_MACH_ARTPEC3) := a3 +mach-$(CONFIG_ETRAXFS) := fs + ifneq ($(arch-y),) SARCH := arch-$(arch-y) else SARCH := endif +ifneq ($(mach-y),) +MACH := mach-$(mach-y) +else +MACH := +endif + LD = $(CROSS_COMPILE)ld -mcrislinux OBJCOPYFLAGS := -O binary -R .note -R .comment -S CPPFLAGS_vmlinux.lds = -DDRAM_VIRTUAL_BASE=0x$(CONFIG_ETRAX_DRAM_VIRTUAL_BASE) -KBUILD_AFLAGS += -mlinux -KBUILD_CFLAGS += -mlinux -march=$(arch-y) -pipe +KBUILD_AFLAGS += -mlinux -march=$(arch-y) -Iinclude/asm/arch/mach -Iinclude/asm/arch + +KBUILD_CFLAGS += -mlinux -march=$(arch-y) -pipe -Iinclude/asm/arch/mach -Iinclude/asm/arch ifdef CONFIG_FRAME_POINTER KBUILD_CFLAGS := $(subst -fomit-frame-pointer,,$(KBUILD_CFLAGS)) -g @@ -44,6 +52,9 @@ LIBGCC = $(shell $(CC) $(KBUILD_CFLAGS) -print-file-name=libgcc.a) core-y += arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/ core-y += arch/$(ARCH)/$(SARCH)/kernel/ arch/$(ARCH)/$(SARCH)/mm/ +ifdef CONFIG_ETRAX_ARCH_V32 +core-y += arch/$(ARCH)/$(SARCH)/$(MACH)/ +endif drivers-y += arch/$(ARCH)/$(SARCH)/drivers/ libs-y += arch/$(ARCH)/$(SARCH)/lib/ $(LIBGCC) @@ -52,79 +63,69 @@ SRC_ARCH = $(srctree)/arch/$(ARCH) # cris object files path OBJ_ARCH = $(objtree)/arch/$(ARCH) -target_boot_arch_dir = $(OBJ_ARCH)/$(SARCH)/boot -target_boot_dir = $(OBJ_ARCH)/boot -src_boot_dir = $(SRC_ARCH)/boot -target_compressed_dir = $(OBJ_ARCH)/boot/compressed -src_compressed_dir = $(SRC_ARCH)/boot/compressed -target_rescue_dir = $(OBJ_ARCH)/boot/rescue -src_rescue_dir = $(SRC_ARCH)/boot/rescue - -export target_boot_arch_dir target_boot_dir src_boot_dir target_compressed_dir src_compressed_dir target_rescue_dir src_rescue_dir - -vmlinux.bin: vmlinux - $(OBJCOPY) $(OBJCOPYFLAGS) vmlinux vmlinux.bin - -timage: vmlinux.bin - cat vmlinux.bin cramfs.img >timage - -simimage: timage - cp vmlinux.bin simvmlinux.bin - -# the following will remake timage without compiling the kernel -# it does of course require that all object files exist... - -cramfs: -## cramfs - Creates a cramfs image - mkcramfs -b 8192 -m romfs_meta.txt root cramfs.img - cat vmlinux.bin cramfs.img >timage +boot := arch/$(ARCH)/boot +MACHINE := arch/$(ARCH)/$(SARCH) -clinux: vmlinux.bin decompress.bin rescue.bin +all: zImage -decompress.bin: $(target_boot_dir) - @$(MAKE) -f $(src_compressed_dir)/Makefile $(target_compressed_dir)/decompress.bin +zImage Image: vmlinux + $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ -$(target_rescue_dir)/rescue.bin: $(target_boot_dir) - @$(MAKE) -f $(src_rescue_dir)/Makefile $(target_rescue_dir)/rescue.bin - -zImage: $(target_boot_dir) vmlinux.bin $(target_rescue_dir)/rescue.bin -## zImage - Compressed kernel (gzip) - @$(MAKE) -f $(src_boot_dir)/Makefile zImage - -$(target_boot_dir): $(target_boot_arch_dir) - ln -sfn $< $@ - -$(target_boot_arch_dir): - mkdir -p $@ - -compressed: zImage - -archmrproper: -archclean: - @if [ -d arch/$(ARCH)/boot ]; then \ - $(MAKE) $(clean)=arch/$(ARCH)/boot ; \ - fi - rm -f timage vmlinux.bin decompress.bin rescue.bin cramfs.img - rm -rf $(LD_SCRIPT).tmp - -archprepare: $(SRC_ARCH)/.links $(srctree)/include/asm-$(ARCH)/.arch +archprepare: $(SRC_ARCH)/.links $(srctree)/include/asm-$(ARCH)/.arch FORCE # Create some links to make all tools happy $(SRC_ARCH)/.links: @rm -rf $(SRC_ARCH)/drivers - @ln -sfn $(SRC_ARCH)/$(SARCH)/drivers $(SRC_ARCH)/drivers + @ln -sfn $(SARCH)/drivers $(SRC_ARCH)/drivers @rm -rf $(SRC_ARCH)/boot - @ln -sfn $(SRC_ARCH)/$(SARCH)/boot $(SRC_ARCH)/boot + @ln -sfn $(SARCH)/boot $(SRC_ARCH)/boot @rm -rf $(SRC_ARCH)/lib - @ln -sfn $(SRC_ARCH)/$(SARCH)/lib $(SRC_ARCH)/lib - @ln -sfn $(SRC_ARCH)/$(SARCH) $(SRC_ARCH)/arch - @ln -sfn $(SRC_ARCH)/$(SARCH)/vmlinux.lds.S $(SRC_ARCH)/kernel/vmlinux.lds.S - @ln -sfn $(SRC_ARCH)/$(SARCH)/kernel/asm-offsets.c $(SRC_ARCH)/kernel/asm-offsets.c + @ln -sfn $(SARCH)/lib $(SRC_ARCH)/lib + @rm -f $(SRC_ARCH)/arch/mach + @rm -rf $(SRC_ARCH)/arch + @ln -sfn $(SARCH) $(SRC_ARCH)/arch +ifdef CONFIG_ETRAX_ARCH_V32 + @ln -sfn ../$(SARCH)/$(MACH) $(SRC_ARCH)/arch/mach +endif + @rm -rf $(SRC_ARCH)/kernel/vmlinux.lds.S + @ln -sfn ../$(SARCH)/vmlinux.lds.S $(SRC_ARCH)/kernel/vmlinux.lds.S + @rm -rf $(SRC_ARCH)/kernel/asm-offsets.c + @ln -sfn ../$(SARCH)/kernel/asm-offsets.c $(SRC_ARCH)/kernel/asm-offsets.c @touch $@ # Create link to sub arch includes $(srctree)/include/asm-$(ARCH)/.arch: $(wildcard include/config/arch/*.h) - @echo ' Making $(srctree)/include/asm-$(ARCH)/arch -> $(srctree)/include/asm-$(ARCH)/$(SARCH) symlink' - @rm -f include/asm-$(ARCH)/arch - @ln -sf $(srctree)/include/asm-$(ARCH)/$(SARCH) $(srctree)/include/asm-$(ARCH)/arch + @echo ' SYMLINK include/asm-$(ARCH)/arch -> include/asm-$(ARCH)/$(SARCH)' + @rm -f $(srctree)/include/asm-$(ARCH)/arch/mach + @rm -f $(srctree)/include/asm-$(ARCH)/arch + @ln -sf $(SARCH) $(srctree)/include/asm-$(ARCH)/arch +ifdef CONFIG_ETRAX_ARCH_V32 + @ln -sf $(MACH) $(srctree)/include/asm-$(ARCH)/arch/mach +endif @touch $@ + +archclean: + $(Q)if [ -e arch/$(ARCH)/boot ]; then \ + $(MAKE) $(clean)=arch/$(ARCH)/boot; \ + fi + +CLEAN_FILES += \ + $(MACHINE)/boot/zImage \ + $(MACHINE)/boot/compressed/decompress.bin \ + $(MACHINE)/boot/compressed/piggy.gz \ + $(MACHINE)/boot/rescue/rescue.bin \ + $(SRC_ARCH)/.links \ + $(srctree)/include/asm-$(ARCH)/.arch + +MRPROPER_FILES += \ + $(SRC_ARCH)/drivers \ + $(SRC_ARCH)/boot \ + $(SRC_ARCH)/lib \ + $(SRC_ARCH)/arch \ + $(SRC_ARCH)/kernel/vmlinux.lds.S \ + $(SRC_ARCH)/kernel/asm-offsets.c + +define archhelp + echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/zImage)' + echo '* Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)' +endef diff --git a/arch/cris/arch-v10/Kconfig b/arch/cris/arch-v10/Kconfig index 1d61faec77cd..adc164e99339 100644 --- a/arch/cris/arch-v10/Kconfig +++ b/arch/cris/arch-v10/Kconfig @@ -1,5 +1,7 @@ if ETRAX_ARCH_V10 +menu "CRIS v10 options" + # ETRAX 100LX v1 has a MMU "feature" requiring a low mapping config CRIS_LOW_MAP bool @@ -228,69 +230,6 @@ config ETRAX_LED12R For products with only one or two controllable LEDs, set this to same as CONFIG_ETRAX_LED1G (normally 2). -choice - prompt "Product debug-port" - depends on ETRAX_ARCH_V10 - default ETRAX_DEBUG_PORT0 - -config ETRAX_DEBUG_PORT0 - bool "Serial-0" - help - Choose a serial port for the ETRAX debug console. Default to - port 0. - -config ETRAX_DEBUG_PORT1 - bool "Serial-1" - help - Use serial port 1 for the console. - -config ETRAX_DEBUG_PORT2 - bool "Serial-2" - help - Use serial port 2 for the console. - -config ETRAX_DEBUG_PORT3 - bool "Serial-3" - help - Use serial port 3 for the console. - -config ETRAX_DEBUG_PORT_NULL - bool "disabled" - help - Disable serial-port debugging. - -endchoice - -choice - prompt "Kernel GDB port" - depends on ETRAX_KGDB - default ETRAX_KGDB_PORT0 - help - Choose a serial port for kernel debugging. NOTE: This port should - not be enabled under Drivers for built-in interfaces (as it has its - own initialization code) and should not be the same as the debug port. - -config ETRAX_KGDB_PORT0 - bool "Serial-0" - help - Use serial port 0 for kernel debugging. - -config ETRAX_KGDB_PORT1 - bool "Serial-1" - help - Use serial port 1 for kernel debugging. - -config ETRAX_KGDB_PORT2 - bool "Serial-2" - help - Use serial port 2 for kernel debugging. - -config ETRAX_KGDB_PORT3 - bool "Serial-3" - help - Use serial port 3 for kernel debugging. - -endchoice choice prompt "Product rescue-port" @@ -454,4 +393,6 @@ config ETRAX_POWERBUTTON_BIT help Configure where power button is connected. +endmenu + endif diff --git a/arch/cris/arch-v10/boot/Makefile b/arch/cris/arch-v10/boot/Makefile index e5b105851108..20c83a53caf3 100644 --- a/arch/cris/arch-v10/boot/Makefile +++ b/arch/cris/arch-v10/boot/Makefile @@ -1,13 +1,21 @@ # -# arch/cris/boot/Makefile +# arch/cris/arch-v10/boot/Makefile # -target = $(target_boot_dir) -src = $(src_boot_dir) -zImage: compressed/vmlinuz +OBJCOPY = objcopy-cris +OBJCOPYFLAGS = -O binary --remove-section=.bss -compressed/vmlinuz: - @$(MAKE) -f $(src)/compressed/Makefile $(target_compressed_dir)/vmlinuz +subdir- := compressed rescue +targets := Image -clean: - @$(MAKE) -f $(src)/compressed/Makefile clean +$(obj)/Image: vmlinux FORCE + $(call if_changed,objcopy) + @echo ' Kernel: $@ is ready' + +$(obj)/compressed/vmlinux: $(obj)/Image FORCE + $(Q)$(MAKE) $(build)=$(obj)/compressed $@ + $(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin + +$(obj)/zImage: $(obj)/compressed/vmlinux + @cp $< $@ + @echo ' Kernel: $@ is ready' diff --git a/arch/cris/arch-v10/boot/compressed/Makefile b/arch/cris/arch-v10/boot/compressed/Makefile index 6584a44820f4..4a031cb27eb9 100644 --- a/arch/cris/arch-v10/boot/compressed/Makefile +++ b/arch/cris/arch-v10/boot/compressed/Makefile @@ -1,45 +1,35 @@ # -# create a compressed vmlinuz image from the binary vmlinux.bin file +# arch/cris/arch-v10/boot/compressed/Makefile # -target = $(target_compressed_dir) -src = $(src_compressed_dir) CC = gcc-cris -melf $(LINUXINCLUDE) -CFLAGS = -O2 +ccflags-y += -O2 LD = ld-cris +ldflags-y += -T $(obj)/decompress.ld +OBJECTS = $(obj)/head.o $(obj)/misc.o OBJCOPY = objcopy-cris OBJCOPYFLAGS = -O binary --remove-section=.bss -OBJECTS = $(target)/head.o $(target)/misc.o -# files to compress -SYSTEM = $(objtree)/vmlinux.bin +quiet_cmd_image = BUILD $@ +cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@ -all: $(target_compressed_dir)/vmlinuz +targets := vmlinux piggy.gz decompress.o decompress.bin -$(target)/decompress.bin: $(OBJECTS) - $(LD) -T $(src)/decompress.ld -o $(target)/decompress.o $(OBJECTS) - $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/decompress.o $(target)/decompress.bin +$(obj)/decompress.o: $(OBJECTS) FORCE + $(call if_changed,ld) -# Create vmlinuz image in top-level build directory -$(target_compressed_dir)/vmlinuz: $(target) piggy.img $(target)/decompress.bin - @echo " COMPR vmlinux.bin --> vmlinuz" - @cat $(target)/decompress.bin piggy.img > $(target_compressed_dir)/vmlinuz - @rm -f piggy.img +$(obj)/decompress.bin: $(obj)/decompress.o FORCE + $(call if_changed,objcopy) -$(target)/head.o: $(src)/head.S - $(CC) -D__ASSEMBLY__ -traditional -c $< -o $@ +$(obj)/head.o: $(obj)/head.S .config + @$(CC) -D__ASSEMBLY__ -traditional -c $< -o $@ -$(target)/misc.o: $(src)/misc.c - $(CC) -D__KERNEL__ -c $< -o $@ +$(obj)/misc.o: $(obj)/misc.c .config + @$(CC) -D__KERNEL__ -c $< -o $@ -# gzip the kernel image +$(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE + $(call if_changed,image) -piggy.img: $(SYSTEM) - @cat $(SYSTEM) | gzip -f -9 > piggy.img - -$(target): - mkdir -p $(target) - -clean: - rm -f piggy.img $(objtree)/vmlinuz +$(obj)/piggy.gz: $(obj)/../Image FORCE + $(call if_changed,gzip) diff --git a/arch/cris/arch-v10/boot/compressed/misc.c b/arch/cris/arch-v10/boot/compressed/misc.c index e205d2e7e089..9a43ab19391e 100644 --- a/arch/cris/arch-v10/boot/compressed/misc.c +++ b/arch/cris/arch-v10/boot/compressed/misc.c @@ -1,15 +1,13 @@ /* * misc.c * - * $Id: misc.c,v 1.6 2003/10/27 08:04:31 starvik Exp $ - * - * This is a collection of several routines from gzip-1.0.3 + * This is a collection of several routines from gzip-1.0.3 * adapted for Linux. * * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994 * puts by Nick Holloway 1993, better puts by Martin Mares 1995 * adaptation for Linux/CRIS Axis Communications AB, 1999 - * + * */ /* where the piggybacked kernel image expects itself to live. diff --git a/arch/cris/arch-v10/boot/rescue/Makefile b/arch/cris/arch-v10/boot/rescue/Makefile index 8be9b3130312..2e5045b9e19c 100644 --- a/arch/cris/arch-v10/boot/rescue/Makefile +++ b/arch/cris/arch-v10/boot/rescue/Makefile @@ -1,56 +1,38 @@ # -# Makefile for rescue code +# Makefile for rescue (bootstrap) code # -target = $(target_rescue_dir) -src = $(src_rescue_dir) CC = gcc-cris -mlinux $(LINUXINCLUDE) -CFLAGS = -O2 +ccflags-y += -O2 +asflags-y += -traditional LD = gcc-cris -mlinux -nostdlib +ldflags-y += -T $(obj)/rescue.ld OBJCOPY = objcopy-cris OBJCOPYFLAGS = -O binary --remove-section=.bss +obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o +OBJECT := $(obj)/head.o -all: $(target)/rescue.bin $(target)/testrescue.bin $(target)/kimagerescue.bin +targets := rescue.o rescue.bin -$(target)/rescue.bin: $(target) $(target)/head.o - $(LD) -T $(src)/rescue.ld -o $(target)/rescue.o $(target)/head.o - $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/rescue.o $(target)/rescue.bin -# Place a copy in top-level build directory - cp -p $(target)/rescue.bin $(objtree) +$(obj)/rescue.o: $(OBJECT) FORCE + $(call if_changed,ld) -$(target)/testrescue.bin: $(target) $(target)/testrescue.o - $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/testrescue.o tr.bin +$(obj)/rescue.bin: $(obj)/rescue.o FORCE + $(call if_changed,objcopy) + cp -p $(obj)/rescue.bin $(objtree) + +$(obj)/testrescue.bin: $(obj)/testrescue.o + $(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/testrescue.o tr.bin # Pad it to 784 bytes dd if=/dev/zero of=tmp2423 bs=1 count=784 cat tr.bin tmp2423 >testrescue_tmp.bin - dd if=testrescue_tmp.bin of=$(target)/testrescue.bin bs=1 count=784 + dd if=testrescue_tmp.bin of=$(obj)/testrescue.bin bs=1 count=784 rm tr.bin tmp2423 testrescue_tmp.bin -$(target)/kimagerescue.bin: $(target) $(target)/kimagerescue.o - $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/kimagerescue.o ktr.bin +$(obj)/kimagerescue.bin: $(obj)/kimagerescue.o + $(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/kimagerescue.o ktr.bin # Pad it to 784 bytes, that's what the rescue loader expects dd if=/dev/zero of=tmp2423 bs=1 count=784 cat ktr.bin tmp2423 >kimagerescue_tmp.bin - dd if=kimagerescue_tmp.bin of=$(target)/kimagerescue.bin bs=1 count=784 + dd if=kimagerescue_tmp.bin of=$(obj)/kimagerescue.bin bs=1 count=784 rm ktr.bin tmp2423 kimagerescue_tmp.bin - -$(target): - mkdir -p $(target) - -$(target)/head.o: $(src)/head.S - $(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o - -$(target)/testrescue.o: $(src)/testrescue.S - $(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o - -$(target)/kimagerescue.o: $(src)/kimagerescue.S - $(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o - -clean: - rm -f $(target)/*.o $(target)/*.bin - -fastdep: - -modules: - -modules-install: diff --git a/arch/cris/arch-v10/boot/rescue/head.S b/arch/cris/arch-v10/boot/rescue/head.S index f223cc0c00bb..6ba7be8ac4a0 100644 --- a/arch/cris/arch-v10/boot/rescue/head.S +++ b/arch/cris/arch-v10/boot/rescue/head.S @@ -1,5 +1,4 @@ -/* $Id: head.S,v 1.7 2005/03/07 12:11:06 starvik Exp $ - * +/* * Rescue code, made to reside at the beginning of the * flash-memory. when it starts, it checks a partition * table at the first sector after the rescue sector. @@ -23,20 +22,20 @@ * Partition table format: * * Code transparency: - * + * * 2 bytes [opcode 'nop'] * 2 bytes [opcode 'di'] * 4 bytes [opcode 'ba <offset>', 8-bit or 16-bit version] * 2 bytes [opcode 'nop', delay slot] * - * Table validation (at +10): - * + * Table validation (at +10): + * * 2 bytes [magic/version word for partitiontable - 0xef, 0xbe] * 2 bytes [length of all entries plus the end marker] * 4 bytes [checksum for the partitiontable itself] * - * Entries, each with the following format, last has offset -1: - * + * Entries, each with the following format, last has offset -1: + * * 4 bytes [offset in bytes, from start of flash] * 4 bytes [length in bytes of partition] * 4 bytes [checksum, simple longword sum] @@ -47,9 +46,9 @@ * End marker * * 4 bytes [-1] - * + * * 10 bytes [0, padding] - * + * * Bit 0 in flags signifies RW or RO. The rescue code only bothers * to check the checksum for RO partitions, since the others will * change their data without updating the checksums. A 1 in bit 0 @@ -59,26 +58,29 @@ * * During the wait for serial input, the status LED will flash so the * user knows something went wrong. - * - * Copyright (C) 1999, 2000, 2001, 2002, 2003 Axis Communications AB + * + * Copyright (C) 1999-2007 Axis Communications AB */ +#ifdef CONFIG_ETRAX_AXISFLASHMAP + #define ASSEMBLER_MACROS_ONLY #include <asm/arch/sv_addr_ag.h> ;; The partitiontable is looked for at the first sector after the boot ;; sector. Sector size is 65536 bytes in all flashes we use. - + #define PTABLE_START CONFIG_ETRAX_PTABLE_SECTOR #define PTABLE_MAGIC 0xbeef ;; The normal Etrax100 on-chip boot ROM does serial boot at 0x380000f0. - ;; That is not where we put our downloaded serial boot-code. The length is - ;; enough for downloading code that loads the rest of itself (after - ;; having setup the DRAM etc). It is the same length as the on-chip - ;; ROM loads, so the same host loader can be used to load a rescued - ;; product as well as one booted through the Etrax serial boot code. - + ;; That is not where we put our downloaded serial boot-code. + ;; The length is enough for downloading code that loads the rest + ;; of itself (after having setup the DRAM etc). + ;; It is the same length as the on-chip ROM loads, so the same + ;; host loader can be used to load a rescued product as well as + ;; one booted through the Etrax serial boot code. + #define CODE_START 0x40000000 #define CODE_LENGTH 784 @@ -102,7 +104,7 @@ #define SERRECC R_SERIAL2_REC_CTRL #define SERRDAT R_SERIAL2_REC_DATA #define SERSTAT R_SERIAL2_STATUS -#endif +#endif #ifdef CONFIG_ETRAX_RESCUE_SER3 #define SERXOFF R_SERIAL3_XOFF #define SERBAUD R_SERIAL3_BAUD @@ -115,60 +117,61 @@ #define RAM_INIT_MAGIC 0x56902387 .text - + ;; This is the entry point of the rescue code ;; 0x80000000 if loaded in flash (as it should be) - ;; since etrax actually starts at address 2 when booting from flash, we + ;; Since etrax actually starts at address 2 when booting from flash, we ;; put a nop (2 bytes) here first so we dont accidentally skip the di - nop + nop di jump in_cache ; enter cached area instead in_cache: - ;; first put a jump test to give a possibility of upgrading the rescue code - ;; without erasing/reflashing the sector. we put a longword of -1 here and if - ;; it is not -1, we jump using the value as jump target. since we can always - ;; change 1's to 0's without erasing the sector, it is possible to add new + ;; First put a jump test to give a possibility of upgrading the + ;; rescue code without erasing/reflashing the sector. + ;; We put a longword of -1 here and if it is not -1, we jump using + ;; the value as jump target. Since we can always change 1's to 0's + ;; without erasing the sector, it is possible to add new ;; code after this and altering the jumptarget in an upgrade. jtcd: move.d [jumptarget], $r0 cmp.d 0xffffffff, $r0 beq no_newjump nop - + jump [$r0] -jumptarget: +jumptarget: .dword 0xffffffff ; can be overwritten later to insert new code - + no_newjump: -#ifdef CONFIG_ETRAX_ETHERNET +#ifdef CONFIG_ETRAX_ETHERNET ;; Start MII clock to make sure it is running when tranceiver is reset move.d 0x3, $r0 ; enable = on, phy = mii_clk move.d $r0, [R_NETWORK_GEN_CONFIG] #endif - + ;; We need to setup the bus registers before we start using the DRAM #include "../../lib/dram_init.S" ;; we now should go through the checksum-table and check the listed ;; partitions for errors. - + move.d PTABLE_START, $r3 move.d [$r3], $r0 cmp.d NOP_DI, $r0 ; make sure the nop/di is there... bne do_rescue nop - + ;; skip the code transparency block (10 bytes). addq 10, $r3 - + ;; check for correct magic - + move.w [$r3+], $r0 cmp.w PTABLE_MAGIC, $r0 bne do_rescue ; didn't recognize - trig rescue @@ -186,11 +189,11 @@ no_newjump: cmp.d $r0, $r4 bne do_rescue ; didn't match - trig rescue nop - + ;; ptable is ok. validate each entry. moveq -1, $r7 - + ploop: move.d [$r3+], $r1 ; partition offset (from ptable start) bne notfirst ; check if it is the partition containing ptable nop ; yes.. @@ -199,7 +202,7 @@ ploop: move.d [$r3+], $r1 ; partition offset (from ptable start) sub.d $r8, $r2 ; minus the ptable length ba bosse nop -notfirst: +notfirst: cmp.d -1, $r1 ; the end of the ptable ? beq flash_ok ; if so, the flash is validated move.d [$r3+], $r2 ; partition length @@ -213,47 +216,46 @@ bosse: move.d [$r3+], $r5 ; checksum bpl 1f nop move.d $r1, $r7 ; remember boot partition offset -1: - +1: add.d PTABLE_START, $r1 - + jsr checksum ; checksum the partition - + cmp.d $r0, $r5 beq ploop ; checksums matched, go to next entry nop ;; otherwise fall through to the rescue code. - + do_rescue: ;; setup port PA and PB default initial directions and data ;; (so we can flash LEDs, and so that DTR and others are set) - + move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0 move.b $r0, [R_PORT_PA_DIR] move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0 move.b $r0, [R_PORT_PA_DATA] - + move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0 move.b $r0, [R_PORT_PB_DIR] move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0 move.b $r0, [R_PORT_PB_DATA] ;; setup the serial port at 115200 baud - + moveq 0, $r0 - move.d $r0, [SERXOFF] + move.d $r0, [SERXOFF] move.b 0x99, $r0 - move.b $r0, [SERBAUD] ; 115.2kbaud for both transmit and receive + move.b $r0, [SERBAUD] ; 115.2kbaud for both transmit and receive - move.b 0x40, $r0 ; rec enable - move.b $r0, [SERRECC] + move.b 0x40, $r0 ; rec enable + move.b $r0, [SERRECC] moveq 0, $r1 ; "timer" to clock out a LED red flash move.d CODE_START, $r3 ; destination counter movu.w CODE_LENGTH, $r4; length - + wait_ser: addq 1, $r1 #ifndef CONFIG_ETRAX_NO_LEDS @@ -272,20 +274,20 @@ wait_ser: nop 1: not $r0 ; clear bit and.d $r0, $r2 -2: +2: #ifdef CONFIG_ETRAX_PA_LEDS - move.b $r2, [R_PORT_PA_DATA] -#endif + move.b $r2, [R_PORT_PA_DATA] +#endif #ifdef CONFIG_ETRAX_PB_LEDS - move.b $r2, [R_PORT_PB_DATA] + move.b $r2, [R_PORT_PB_DATA] #endif #ifdef CONFIG_ETRAX_90000000_LEDS move.b $r2, [0x90000000] #endif #endif - + ;; check if we got something on the serial port - + move.b [SERSTAT], $r0 btstq 0, $r0 ; data_avail bpl wait_ser @@ -295,14 +297,15 @@ wait_ser: move.b [SERRDAT], $r0 move.b $r0, [$r3+] - + subq 1, $r4 ; decrease length bne wait_ser nop ;; jump into downloaded code - move.d RAM_INIT_MAGIC, $r8 ; Tell next product that DRAM is initialized + move.d RAM_INIT_MAGIC, $r8 ; Tell next product that DRAM is + ; initialized jump CODE_START flash_ok: @@ -313,7 +316,8 @@ flash_ok: nop move.d PTABLE_START, $r7; otherwise use the ptable start 1: - move.d RAM_INIT_MAGIC, $r8 ; Tell next product that DRAM is initialized + move.d RAM_INIT_MAGIC, $r8 ; Tell next product that DRAM is + ; initialized jump $r7 ; boot! @@ -327,7 +331,8 @@ checksum: moveq 0, $r0 moveq CONFIG_ETRAX_FLASH1_SIZE, $r6 - ;; If the first physical flash memory is exceeded wrap to the second one. + ;; If the first physical flash memory is exceeded wrap to the + ;; second one btstq 26, $r1 ; Are we addressing first flash? bpl 1f nop @@ -351,3 +356,5 @@ checksum: 3: move.d MEM_CSE1_START, $r1 ; wrap to second flash ba 2b nop + +#endif diff --git a/arch/cris/arch-v10/boot/rescue/kimagerescue.S b/arch/cris/arch-v10/boot/rescue/kimagerescue.S index cbccd6316d39..55eeff8bb08e 100644 --- a/arch/cris/arch-v10/boot/rescue/kimagerescue.S +++ b/arch/cris/arch-v10/boot/rescue/kimagerescue.S @@ -1,5 +1,4 @@ -/* $Id: kimagerescue.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $ - * +/* * Rescue code to be prepended on a kimage and copied to the * rescue serial port. * This is called from the rescue code, it will copy received data to @@ -7,13 +6,13 @@ */ #define ASSEMBLER_MACROS_ONLY -#include <asm/sv_addr_ag.h> +#include <asm/arch/sv_addr_ag.h> #define CODE_START 0x40004000 #define CODE_LENGTH 784 #define TIMEOUT_VALUE 1000 - - + + #ifdef CONFIG_ETRAX_RESCUE_SER0 #define SERXOFF R_SERIAL0_XOFF #define SERBAUD R_SERIAL0_BAUD @@ -34,7 +33,7 @@ #define SERRECC R_SERIAL2_REC_CTRL #define SERRDAT R_SERIAL2_REC_DATA #define SERSTAT R_SERIAL2_STATUS -#endif +#endif #ifdef CONFIG_ETRAX_RESCUE_SER3 #define SERXOFF R_SERIAL3_XOFF #define SERBAUD R_SERIAL3_BAUD @@ -48,54 +47,55 @@ ;; 0x80000000 if loaded in flash (as it should be) ;; since etrax actually starts at address 2 when booting from flash, we ;; put a nop (2 bytes) here first so we dont accidentally skip the di - - nop + + nop di -#ifndef CONFIG_SVINTO_SIM +#ifndef CONFIG_SVINTO_SIM ;; setup port PA and PB default initial directions and data ;; (so we can flash LEDs, and so that DTR and others are set) - + move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0 move.b $r0, [R_PORT_PA_DIR] move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0 move.b $r0, [R_PORT_PA_DATA] - + move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0 move.b $r0, [R_PORT_PB_DIR] move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0 move.b $r0, [R_PORT_PB_DATA] - + ;; We need to setup the bus registers before we start using the DRAM #include "../../lib/dram_init.S" - + #endif ;; Setup the stack to a suitably high address. ;; We assume 8 MB is the minimum DRAM in an eLinux ;; product and put the sp at the top for now. move.d 0x40800000, $sp - + ;; setup the serial port at 115200 baud - + moveq 0, $r0 - move.d $r0, [SERXOFF] + move.d $r0, [SERXOFF] move.b 0x99, $r0 - move.b $r0, [SERBAUD] ; 115.2kbaud for both transmit and receive + move.b $r0, [SERBAUD] ; 115.2kbaud for both transmit + ; and receive move.b 0x40, $r0 ; rec enable - move.b $r0, [SERRECC] + move.b $r0, [SERRECC] - moveq 0, $r1 ; "timer" to clock out a LED red flash - move.d CODE_START, $r3 ; destination counter + moveq 0, $r1 ; "timer" to clock out a LED red flash + move.d CODE_START, $r3 ; destination counter move.d CODE_LENGTH, $r4 ; length move.d TIMEOUT_VALUE, $r5 ; "timeout" until jump wait_ser: addq 1, $r1 - subq 1, $r5 ; decrease timeout - beq jump_start ; timed out + subq 1, $r5 ; decrease timeout + beq jump_start ; timed out nop #ifndef CONFIG_ETRAX_NO_LEDS #ifdef CONFIG_ETRAX_PA_LEDS @@ -111,21 +111,21 @@ wait_ser: or.d $r0, $r2 ; set bit ba 2f nop -1: not $r0 ; clear bit +1: not $r0 ; clear bit and.d $r0, $r2 -2: +2: #ifdef CONFIG_ETRAX_PA_LEDS move.b $r2, [R_PORT_PA_DATA] -#endif +#endif #ifdef CONFIG_ETRAX_PB_LEDS move.b $r2, [R_PORT_PB_DATA] #endif #endif - + ;; check if we got something on the serial port - + move.b [SERSTAT], $r0 - btstq 0, $r0 ; data_avail + btstq 0, $r0 ; data_avail bpl wait_ser nop @@ -134,7 +134,7 @@ wait_ser: move.b [SERRDAT], $r0 move.b $r0, [$r3+] move.d TIMEOUT_VALUE, $r5 ; reset "timeout" - subq 1, $r4 ; decrease length + subq 1, $r4 ; decrease length bne wait_ser nop jump_start: diff --git a/arch/cris/arch-v10/boot/rescue/testrescue.S b/arch/cris/arch-v10/boot/rescue/testrescue.S index 566a9f341254..2d937f9afe23 100644 --- a/arch/cris/arch-v10/boot/rescue/testrescue.S +++ b/arch/cris/arch-v10/boot/rescue/testrescue.S @@ -1,13 +1,12 @@ -/* $Id: testrescue.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $ - * +/* * Simple testcode to download by the rescue block. - * Just lits some LEDs to show it was downloaded correctly. - * + * Just lights some LEDs to show it was downloaded correctly. + * * Copyright (C) 1999 Axis Communications AB */ #define ASSEMBLER_MACROS_ONLY -#include <asm/sv_addr_ag.h> +#include <asm/arch/sv_addr_ag.h> .text @@ -16,11 +15,10 @@ moveq -1, $r2 move.b $r2, [R_PORT_PA_DIR] moveq 0, $r2 - move.b $r2, [R_PORT_PA_DATA] + move.b $r2, [R_PORT_PA_DATA] endless: nop ba endless nop - diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig index 96740ef497d4..58f5864a6680 100644 --- a/arch/cris/arch-v10/drivers/Kconfig +++ b/arch/cris/arch-v10/drivers/Kconfig @@ -9,37 +9,6 @@ config ETRAX_ETHERNET This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet controller. -choice - prompt "Network LED behavior" - depends on ETRAX_ETHERNET - default ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY - -config ETRAX_NETWORK_LED_ON_WHEN_LINK - bool "LED_on_when_link" - help - Selecting LED_on_when_link will light the LED when there is a - connection and will flash off when there is activity. - - Selecting LED_on_when_activity will light the LED only when - there is activity. - - This setting will also affect the behaviour of other activity LEDs - e.g. Bluetooth. - -config ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY - bool "LED_on_when_activity" - help - Selecting LED_on_when_link will light the LED when there is a - connection and will flash off when there is activity. - - Selecting LED_on_when_activity will light the LED only when - there is activity. - - This setting will also affect the behaviour of other activity LEDs - e.g. Bluetooth. - -endchoice - config ETRAX_SERIAL bool "Serial-port support" depends on ETRAX_ARCH_V10 @@ -84,32 +53,6 @@ config ETRAX_SERIAL_PORT0 the same DMA channels. choice - prompt "Ser0 DMA out assignment" - depends on ETRAX_SERIAL_PORT0 - default ETRAX_SERIAL_PORT0_DMA6_OUT - -config ETRAX_SERIAL_PORT0_NO_DMA_OUT - bool "No DMA out" - -config ETRAX_SERIAL_PORT0_DMA6_OUT - bool "DMA 6" - -endchoice - -choice - prompt "Ser0 DMA in assignment" - depends on ETRAX_SERIAL_PORT0 - default ETRAX_SERIAL_PORT0_DMA7_IN - -config ETRAX_SERIAL_PORT0_NO_DMA_IN - bool "No DMA in" - -config ETRAX_SERIAL_PORT0_DMA7_IN - bool "DMA 7" - -endchoice - -choice prompt "Ser0 DTR, RI, DSR and CD assignment" depends on ETRAX_SERIAL_PORT0 default ETRAX_SER0_DTR_RI_DSR_CD_ON_NONE @@ -198,32 +141,6 @@ config ETRAX_SERIAL_PORT1 Enables the ETRAX 100 serial driver for ser1 (ttyS1). choice - prompt "Ser1 DMA out assignment" - depends on ETRAX_SERIAL_PORT1 - default ETRAX_SERIAL_PORT1_DMA8_OUT - -config ETRAX_SERIAL_PORT1_NO_DMA_OUT - bool "No DMA out" - -config ETRAX_SERIAL_PORT1_DMA8_OUT - bool "DMA 8" - -endchoice - -choice - prompt "Ser1 DMA in assignment" - depends on ETRAX_SERIAL_PORT1 - default ETRAX_SERIAL_PORT1_DMA9_IN - -config ETRAX_SERIAL_PORT1_NO_DMA_IN - bool "No DMA in" - -config ETRAX_SERIAL_PORT1_DMA9_IN - bool "DMA 9" - -endchoice - -choice prompt "Ser1 DTR, RI, DSR and CD assignment" depends on ETRAX_SERIAL_PORT1 default ETRAX_SER1_DTR_RI_DSR_CD_ON_NONE @@ -315,32 +232,6 @@ config ETRAX_SERIAL_PORT2 Enables the ETRAX 100 serial driver for ser2 (ttyS2). choice - prompt "Ser2 DMA out assignment" - depends on ETRAX_SERIAL_PORT2 - default ETRAX_SERIAL_PORT2_DMA2_OUT - -config ETRAX_SERIAL_PORT2_NO_DMA_OUT - bool "No DMA out" - -config ETRAX_SERIAL_PORT2_DMA2_OUT - bool "DMA 2" - -endchoice - -choice - prompt "Ser2 DMA in assignment" - depends on ETRAX_SERIAL_PORT2 - default ETRAX_SERIAL_PORT2_DMA3_IN - -config ETRAX_SERIAL_PORT2_NO_DMA_IN - bool "No DMA in" - -config ETRAX_SERIAL_PORT2_DMA3_IN - bool "DMA 3" - -endchoice - -choice prompt "Ser2 DTR, RI, DSR and CD assignment" depends on ETRAX_SERIAL_PORT2 default ETRAX_SER2_DTR_RI_DSR_CD_ON_NONE @@ -429,32 +320,6 @@ config ETRAX_SERIAL_PORT3 Enables the ETRAX 100 serial driver for ser3 (ttyS3). choice - prompt "Ser3 DMA out assignment" - depends on ETRAX_SERIAL_PORT3 - default ETRAX_SERIAL_PORT3_DMA4_OUT - -config ETRAX_SERIAL_PORT3_NO_DMA_OUT - bool "No DMA out" - -config ETRAX_SERIAL_PORT3_DMA4_OUT - bool "DMA 4" - -endchoice - -choice - prompt "Ser3 DMA in assignment" - depends on ETRAX_SERIAL_PORT3 - default ETRAX_SERIAL_PORT3_DMA5_IN - -config ETRAX_SERIAL_PORT3_NO_DMA_IN - bool "No DMA in" - -config ETRAX_SERIAL_PORT3_DMA5_IN - bool "DMA 5" - -endchoice - -choice prompt "Ser3 DTR, RI, DSR and CD assignment" depends on ETRAX_SERIAL_PORT3 default ETRAX_SER3_DTR_RI_DSR_CD_ON_NONE @@ -563,21 +428,6 @@ config ETRAX_USB_HOST_PORT2 depends on ETRAX_USB_HOST default n -config ETRAX_AXISFLASHMAP - bool "Axis flash-map support" - depends on ETRAX_ARCH_V10 - select MTD - select MTD_CFI - select MTD_CFI_AMDSTD - select MTD_CHAR - select MTD_BLOCK - select MTD_PARTITIONS - select MTD_CONCAT - select MTD_COMPLEX_MAPPINGS - help - This option enables MTD mapping of flash devices. Needed to use - flash memories. If unsure, say Y. - config ETRAX_PTABLE_SECTOR int "Byte-offset of partition table sector" depends on ETRAX_AXISFLASHMAP @@ -731,37 +581,6 @@ config ETRAX_PB_CHANGEABLE_BITS Bit set = changeable. You probably want 00 here. -config ETRAX_RTC - bool "Real Time Clock support" - depends on ETRAX_ARCH_V10 - help - Enables drivers for the Real-Time Clock battery-backed chips on - some products. The kernel reads the time when booting, and - the date can be set using ioctl(fd, RTC_SET_TIME, &rt) with rt a - rtc_time struct (see <file:include/asm-cris/rtc.h>) on the /dev/rtc - device, major 121. You can check the time with cat /proc/rtc, but - normal time reading should be done using libc function time and - friends. - -choice - prompt "RTC chip" - depends on ETRAX_RTC - default ETRAX_DS1302 - -config ETRAX_DS1302 - bool "DS1302" - help - Enables the driver for the DS1302 Real-Time Clock battery-backed - chip on some products. - -config ETRAX_PCF8563 - bool "PCF8563" - help - Enables the driver for the PCF8563 Real-Time Clock battery-backed - chip on some products. - -endchoice - config ETRAX_DS1302_RST_ON_GENERIC_PORT bool "DS1302 RST on Generic Port" depends on ETRAX_DS1302 diff --git a/arch/cris/arch-v10/drivers/Makefile b/arch/cris/arch-v10/drivers/Makefile index 20258e36f384..44bf2e88c26e 100644 --- a/arch/cris/arch-v10/drivers/Makefile +++ b/arch/cris/arch-v10/drivers/Makefile @@ -2,11 +2,11 @@ # Makefile for Etrax-specific drivers # -obj-$(CONFIG_ETRAX_AXISFLASHMAP) += axisflashmap.o -obj-$(CONFIG_ETRAX_I2C) += i2c.o -obj-$(CONFIG_ETRAX_I2C_EEPROM) += eeprom.o -obj-$(CONFIG_ETRAX_GPIO) += gpio.o -obj-$(CONFIG_ETRAX_DS1302) += ds1302.o +obj-$(CONFIG_ETRAX_AXISFLASHMAP) += axisflashmap.o +obj-$(CONFIG_ETRAX_I2C) += i2c.o +obj-$(CONFIG_ETRAX_I2C_EEPROM) += eeprom.o +obj-$(CONFIG_ETRAX_GPIO) += gpio.o +obj-$(CONFIG_ETRAX_DS1302) += ds1302.o obj-$(CONFIG_ETRAX_PCF8563) += pcf8563.o - +obj-$(CONFIG_ETRAX_SYNCHRONOUS_SERIAL) += sync_serial.o diff --git a/arch/cris/arch-v10/drivers/axisflashmap.c b/arch/cris/arch-v10/drivers/axisflashmap.c index ea3cf2e39a14..b3bdda93ffef 100644 --- a/arch/cris/arch-v10/drivers/axisflashmap.c +++ b/arch/cris/arch-v10/drivers/axisflashmap.c @@ -10,129 +10,6 @@ * tells us what other partitions to define. If there isn't, we use a default * partition split defined below. * - * $Log: axisflashmap.c,v $ - * Revision 1.11 2004/11/15 10:27:14 starvik - * Corrected typo (Thanks to Milton Miller <miltonm@bga.com>). - * - * Revision 1.10 2004/08/16 12:37:22 starvik - * Merge of Linux 2.6.8 - * - * Revision 1.8 2004/05/14 07:58:03 starvik - * Merge of changes from 2.4 - * - * Revision 1.6 2003/07/04 08:27:37 starvik - * Merge of Linux 2.5.74 - * - * Revision 1.5 2002/12/11 13:13:57 starvik - * Added arch/ to v10 specific includes - * Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer) - * - * Revision 1.4 2002/11/20 11:56:10 starvik - * Merge of Linux 2.5.48 - * - * Revision 1.3 2002/11/13 14:54:13 starvik - * Copied from linux 2.4 - * - * Revision 1.28 2002/10/01 08:08:43 jonashg - * The first partition ends at the start of the partition table. - * - * Revision 1.27 2002/08/21 09:23:13 jonashg - * Speling. - * - * Revision 1.26 2002/08/21 08:35:20 jonashg - * Cosmetic change to printouts. - * - * Revision 1.25 2002/08/21 08:15:42 jonashg - * Made it compile even without CONFIG_MTD_CONCAT defined. - * - * Revision 1.24 2002/08/20 13:12:35 jonashg - * * New approach to probing. Probe cse0 and cse1 separately and (mtd)concat - * the results. - * * Removed compile time tests concerning how the mtdram driver has been - * configured. The user will know about the misconfiguration at runtime - * instead. (The old approach made it impossible to use mtdram for anything - * else than RAM boot). - * - * Revision 1.23 2002/05/13 12:12:28 johana - * Allow compile without CONFIG_MTD_MTDRAM but warn at compiletime and - * be informative at runtime. - * - * Revision 1.22 2002/05/13 10:24:44 johana - * Added #if checks on MTDRAM CONFIG - * - * Revision 1.21 2002/05/06 16:05:20 johana - * Removed debug printout. - * - * Revision 1.20 2002/05/06 16:03:00 johana - * No more cramfs as root hack in generic code. - * It's handled by axisflashmap using mtdram. - * - * Revision 1.19 2002/03/15 17:10:28 bjornw - * Changed comment about cached access since we changed this before - * - * Revision 1.18 2002/03/05 17:06:15 jonashg - * Try amd_flash probe before cfi_probe since amd_flash driver can handle two - * (or more) flash chips of different model and the cfi driver cannot. - * - * Revision 1.17 2001/11/12 19:42:38 pkj - * Fixed compiler warnings. - * - * Revision 1.16 2001/11/08 11:18:58 jonashg - * Always read from uncached address to avoid problems with flushing - * cachelines after write and MTD-erase. No performance loss have been - * seen yet. - * - * Revision 1.15 2001/10/19 12:41:04 jonashg - * Name of probe has changed in MTD. - * - * Revision 1.14 2001/09/21 07:14:10 jonashg - * Made root filesystem (cramfs) use mtdblock driver when booting from flash. - * - * Revision 1.13 2001/08/15 13:57:35 jonashg - * Entire MTD updated to the linux 2.4.7 version. - * - * Revision 1.12 2001/06/11 09:50:30 jonashg - * Oops, 2MB is 0x200000 bytes. - * - * Revision 1.11 2001/06/08 11:39:44 jonashg - * Changed sizes and offsets in axis_default_partitions to use - * CONFIG_ETRAX_PTABLE_SECTOR. - * - * Revision 1.10 2001/05/29 09:42:03 jonashg - * Use macro for end marker length instead of sizeof. - * - * Revision 1.9 2001/05/29 08:52:52 jonashg - * Gave names to the magic fours (size of the ptable end marker). - * - * Revision 1.8 2001/05/28 15:36:20 jonashg - * * Removed old comment about ptable location in flash (it's a CONFIG_ option). - * * Variable ptable was initialized twice to the same value. - * - * Revision 1.7 2001/04/05 13:41:46 markusl - * Updated according to review remarks - * - * Revision 1.6 2001/03/07 09:21:21 bjornw - * No need to waste .data - * - * Revision 1.5 2001/03/06 16:27:01 jonashg - * Probe the entire flash area for flash devices. - * - * Revision 1.4 2001/02/23 12:47:15 bjornw - * Uncached flash in LOW_MAP moved from 0xe to 0x8 - * - * Revision 1.3 2001/02/16 12:11:45 jonashg - * MTD driver amd_flash is now included in MTD CVS repository. - * (It's now in drivers/mtd). - * - * Revision 1.2 2001/02/09 11:12:22 jonashg - * Support for AMD compatible non-CFI flash chips. - * Only tested with Toshiba TC58FVT160 so far. - * - * Revision 1.1 2001/01/12 17:01:18 bjornw - * * Added axisflashmap.c, a physical mapping for MTD that reads and understands - * Axis partition-table format. - * - * */ #include <linux/module.h> @@ -235,7 +112,7 @@ static struct map_info map_cse1 = { }; /* If no partition-table was found, we use this default-set. */ -#define MAX_PARTITIONS 7 +#define MAX_PARTITIONS 7 #define NUM_DEFAULT_PARTITIONS 3 /* @@ -300,6 +177,15 @@ static struct mtd_partition axis_partitions[MAX_PARTITIONS] = { }, }; +#ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE +/* Main flash device */ +static struct mtd_partition main_partition = { + .name = "main", + .size = 0, + .offset = 0 +}; +#endif + /* * Probe a chip select for AMD-compatible (JEDEC) or CFI-compatible flash * chips in that order (because the amd_flash-driver is faster). @@ -316,15 +202,14 @@ static struct mtd_info *probe_cs(struct map_info *map_cs) mtd_cs = do_map_probe("cfi_probe", map_cs); #endif #ifdef CONFIG_MTD_JEDECPROBE - if (!mtd_cs) { + if (!mtd_cs) mtd_cs = do_map_probe("jedec_probe", map_cs); - } #endif return mtd_cs; } -/* +/* * Probe each chip select individually for flash chips. If there are chips on * both cse0 and cse1, the mtd_info structs will be concatenated to one struct * so that MTD partitions can cross chip boundries. @@ -351,7 +236,7 @@ static struct mtd_info *flash_probe(void) if (mtd_cse0 && mtd_cse1) { #ifdef CONFIG_MTD_CONCAT struct mtd_info *mtds[] = { mtd_cse0, mtd_cse1 }; - + /* Since the concatenation layer adds a small overhead we * could try to figure out if the chips in cse0 and cse1 are * identical and reprobe the whole cse0+cse1 window. But since @@ -372,7 +257,7 @@ static struct mtd_info *flash_probe(void) /* The best we can do now is to only use what we found * at cse0. - */ + */ mtd_cse = mtd_cse0; map_destroy(mtd_cse1); } @@ -395,7 +280,7 @@ static int __init init_axis_flash(void) struct partitiontable_head *ptable_head = NULL; struct partitiontable_entry *ptable; int use_default_ptable = 1; /* Until proven otherwise. */ - const char *pmsg = " /dev/flash%d at 0x%08x, size 0x%08x\n"; + const char pmsg[] = " /dev/flash%d at 0x%08x, size 0x%08x\n"; if (!(mymtd = flash_probe())) { /* There's no reason to use this module if no flash chip can @@ -435,7 +320,7 @@ static int __init init_axis_flash(void) unsigned long offset = CONFIG_ETRAX_PTABLE_SECTOR; unsigned char *p; unsigned long csum = 0; - + ptable = (struct partitiontable_entry *) ((unsigned long)ptable_head + sizeof(*ptable_head)); @@ -490,6 +375,16 @@ static int __init init_axis_flash(void) pidx++; } +#ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE + if (mymtd) { + main_partition.size = mymtd->size; + err = add_mtd_partitions(mymtd, &main_partition, 1); + if (err) + panic("axisflashmap: Could not initialize " + "partition for whole main mtd device!\n"); + } +#endif + if (mymtd) { if (use_default_ptable) { printk(KERN_INFO " Using default partition table.\n"); @@ -499,9 +394,8 @@ static int __init init_axis_flash(void) err = add_mtd_partitions(mymtd, axis_partitions, pidx); } - if (err) { + if (err) panic("axisflashmap could not add MTD partitions!\n"); - } } if (!romfs_in_flash) { @@ -515,25 +409,24 @@ static int __init init_axis_flash(void) #else struct mtd_info *mtd_ram; - mtd_ram = kmalloc(sizeof(struct mtd_info), - GFP_KERNEL); - if (!mtd_ram) { + mtd_ram = kmalloc(sizeof(struct mtd_info), GFP_KERNEL); + if (!mtd_ram) panic("axisflashmap couldn't allocate memory for " "mtd_info!\n"); - } printk(KERN_INFO " Adding RAM partition for romfs image:\n"); - printk(pmsg, pidx, romfs_start, romfs_length); - - err = mtdram_init_device(mtd_ram, (void*)romfs_start, - romfs_length, "romfs"); - if (err) { + printk(pmsg, pidx, (unsigned)romfs_start, + (unsigned)romfs_length); + + err = mtdram_init_device(mtd_ram, + (void *)romfs_start, + romfs_length, + "romfs"); + if (err) panic("axisflashmap could not initialize MTD RAM " "device!\n"); - } #endif } - return err; } diff --git a/arch/cris/arch-v10/drivers/ds1302.c b/arch/cris/arch-v10/drivers/ds1302.c index 1d1936a18133..c9aa3904be05 100644 --- a/arch/cris/arch-v10/drivers/ds1302.c +++ b/arch/cris/arch-v10/drivers/ds1302.c @@ -333,7 +333,7 @@ rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, ds1302_writereg(RTC_TRICKLECHARGER, tcs_val); return 0; } - case RTC_VLOW_RD: + case RTC_VL_READ: { /* TODO: * Implement voltage low detection support @@ -342,7 +342,7 @@ rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, " is not supported\n"); return 0; } - case RTC_VLOW_SET: + case RTC_VL_CLR: { /* TODO: * Nothing to do since Voltage Low detection is not supported diff --git a/arch/cris/arch-v10/drivers/eeprom.c b/arch/cris/arch-v10/drivers/eeprom.c index be35a70798aa..f1cac9dc75b8 100644 --- a/arch/cris/arch-v10/drivers/eeprom.c +++ b/arch/cris/arch-v10/drivers/eeprom.c @@ -19,77 +19,6 @@ *! Sep 03 1999 Edgar Iglesias Added bail-out stuff if we get interrupted *! in the spin-lock. *! -*! $Log: eeprom.c,v $ -*! Revision 1.12 2005/06/19 17:06:46 starvik -*! Merge of Linux 2.6.12. -*! -*! Revision 1.11 2005/01/26 07:14:46 starvik -*! Applied diff from kernel janitors (Nish Aravamudan). -*! -*! Revision 1.10 2003/09/11 07:29:48 starvik -*! Merge of Linux 2.6.0-test5 -*! -*! Revision 1.9 2003/07/04 08:27:37 starvik -*! Merge of Linux 2.5.74 -*! -*! Revision 1.8 2003/04/09 05:20:47 starvik -*! Merge of Linux 2.5.67 -*! -*! Revision 1.6 2003/02/10 07:19:28 starvik -*! Removed misplaced ; -*! -*! Revision 1.5 2002/12/11 13:13:57 starvik -*! Added arch/ to v10 specific includes -*! Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer) -*! -*! Revision 1.4 2002/11/20 11:56:10 starvik -*! Merge of Linux 2.5.48 -*! -*! Revision 1.3 2002/11/18 13:16:06 starvik -*! Linux 2.5 port of latest 2.4 drivers -*! -*! Revision 1.8 2001/06/15 13:24:29 jonashg -*! * Added verification of pointers from userspace in read and write. -*! * Made busy counter volatile. -*! * Added define for initial write delay. -*! * Removed warnings by using loff_t instead of unsigned long. -*! -*! Revision 1.7 2001/06/14 15:26:54 jonashg -*! Removed test because condition is always true. -*! -*! Revision 1.6 2001/06/14 15:18:20 jonashg -*! Kb -> kB (makes quite a difference if you don't know if you have 2k or 16k). -*! -*! Revision 1.5 2001/06/14 14:39:51 jonashg -*! Forgot to use name when registering the driver. -*! -*! Revision 1.4 2001/06/14 14:35:47 jonashg -*! * Gave driver a name and used it in printk's. -*! * Cleanup. -*! -*! Revision 1.3 2001/03/19 16:04:46 markusl -*! Fixed init of fops struct -*! -*! Revision 1.2 2001/03/19 10:35:07 markusl -*! 2.4 port of eeprom driver -*! -*! Revision 1.8 2000/05/18 10:42:25 edgar -*! Make sure to end write cycle on _every_ write -*! -*! Revision 1.7 2000/01/17 17:41:01 johana -*! Adjusted probing and return -ENOSPC when writing outside EEPROM -*! -*! Revision 1.6 2000/01/17 15:50:36 johana -*! Added adaptive timing adjustments and fixed autoprobing for 2k and 16k(?) -*! EEPROMs -*! -*! Revision 1.5 1999/09/03 15:07:37 edgar -*! Added bail-out check to the spinlock -*! -*! Revision 1.4 1999/09/03 12:11:17 bjornw -*! Proper atomicity (need to use spinlocks, not if's). users -> busy. -*! -*! *! (c) 1999 Axis Communications AB, Lund, Sweden *!*****************************************************************************/ @@ -103,10 +32,10 @@ #include <asm/uaccess.h> #include "i2c.h" -#define D(x) +#define D(x) /* If we should use adaptive timing or not: */ -//#define EEPROM_ADAPTIVE_TIMING +/* #define EEPROM_ADAPTIVE_TIMING */ #define EEPROM_MAJOR_NR 122 /* use a LOCAL/EXPERIMENTAL major for now */ #define EEPROM_MINOR_NR 0 diff --git a/arch/cris/arch-v10/drivers/gpio.c b/arch/cris/arch-v10/drivers/gpio.c index 0d347a705835..68a998bd1069 100644 --- a/arch/cris/arch-v10/drivers/gpio.c +++ b/arch/cris/arch-v10/drivers/gpio.c @@ -1,138 +1,11 @@ -/* $Id: gpio.c,v 1.17 2005/06/19 17:06:46 starvik Exp $ - * +/* * Etrax general port I/O device * - * Copyright (c) 1999, 2000, 2001, 2002 Axis Communications AB + * Copyright (c) 1999-2007 Axis Communications AB * * Authors: Bjorn Wesen (initial version) * Ola Knutsson (LED handling) * Johan Adolfsson (read/set directions, write, port G) - * - * $Log: gpio.c,v $ - * Revision 1.17 2005/06/19 17:06:46 starvik - * Merge of Linux 2.6.12. - * - * Revision 1.16 2005/03/07 13:02:29 starvik - * Protect driver global states with spinlock - * - * Revision 1.15 2005/01/05 06:08:55 starvik - * No need to do local_irq_disable after local_irq_save. - * - * Revision 1.14 2004/12/13 12:21:52 starvik - * Added I/O and DMA allocators from Linux 2.4 - * - * Revision 1.12 2004/08/24 07:19:59 starvik - * Whitespace cleanup - * - * Revision 1.11 2004/05/14 07:58:03 starvik - * Merge of changes from 2.4 - * - * Revision 1.9 2003/09/11 07:29:48 starvik - * Merge of Linux 2.6.0-test5 - * - * Revision 1.8 2003/07/04 08:27:37 starvik - * Merge of Linux 2.5.74 - * - * Revision 1.7 2003/01/10 07:44:07 starvik - * init_ioremap is now called by kernel before drivers are initialized - * - * Revision 1.6 2002/12/11 13:13:57 starvik - * Added arch/ to v10 specific includes - * Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer) - * - * Revision 1.5 2002/11/20 11:56:11 starvik - * Merge of Linux 2.5.48 - * - * Revision 1.4 2002/11/18 10:10:05 starvik - * Linux 2.5 port of latest gpio.c from Linux 2.4 - * - * Revision 1.20 2002/10/16 21:16:24 johana - * Added support for PA high level interrupt. - * That gives 2ms response time with iodtest for high levels and 2-12 ms - * response time on low levels if the check is not made in - * process.c:cpu_idle() as well. - * - * Revision 1.19 2002/10/14 18:27:33 johana - * Implemented alarm handling so select() now works. - * Latency is around 6-9 ms with a etrax_gpio_wake_up_check() in - * cpu_idle(). - * Otherwise I get 15-18 ms (same as doing the poll in userspace - - * but less overhead). - * TODO? Perhaps we should add the check in IMMEDIATE_BH (or whatever it - * is in 2.4) as well? - * TODO? Perhaps call request_irq()/free_irq() only when needed? - * Increased version to 2.5 - * - * Revision 1.18 2002/10/11 15:02:00 johana - * Mask inverted 8 bit value in setget_input(). - * - * Revision 1.17 2002/06/17 15:53:01 johana - * Added IO_READ_INBITS, IO_READ_OUTBITS, IO_SETGET_INPUT and IO_SETGET_OUTPUT - * that take a pointer as argument and thus can handle 32 bit ports (G) - * correctly. - * These should be used instead of IO_READBITS, IO_SETINPUT and IO_SETOUTPUT. - * (especially if Port G bit 31 is used) - * - * Revision 1.16 2002/06/17 09:59:51 johana - * Returning 32 bit values in the ioctl return value doesn't work if bit - * 31 is set (could happen for port G), so mask it of with 0x7FFFFFFF. - * A new set of ioctl's will be added. - * - * Revision 1.15 2002/05/06 13:19:13 johana - * IO_SETINPUT returns mask with bit set = inputs for PA and PB as well. - * - * Revision 1.14 2002/04/12 12:01:53 johana - * Use global r_port_g_data_shadow. - * Moved gpio_init_port_g() closer to gpio_init() and marked it __init. - * - * Revision 1.13 2002/04/10 12:03:55 johana - * Added support for port G /dev/gpiog (minor 3). - * Changed indentation on switch cases. - * Fixed other spaces to tabs. - * - * Revision 1.12 2001/11/12 19:42:15 pkj - * * Corrected return values from gpio_leds_ioctl(). - * * Fixed compiler warnings. - * - * Revision 1.11 2001/10/30 14:39:12 johana - * Added D() around gpio_write printk. - * - * Revision 1.10 2001/10/25 10:24:42 johana - * Added IO_CFG_WRITE_MODE ioctl and write method that can do fast - * bittoggling in the kernel. (This speeds up programming an FPGA with 450kB - * from ~60 seconds to 4 seconds). - * Added save_flags/cli/restore_flags in ioctl. - * - * Revision 1.9 2001/05/04 14:16:07 matsfg - * Corrected spelling error - * - * Revision 1.8 2001/04/27 13:55:26 matsfg - * Moved initioremap. - * Turns off all LEDS on init. - * Added support for shutdown and powerbutton. - * - * Revision 1.7 2001/04/04 13:30:08 matsfg - * Added bitset and bitclear for leds. Calls init_ioremap to set up memmapping - * - * Revision 1.6 2001/03/26 16:03:06 bjornw - * Needs linux/config.h - * - * Revision 1.5 2001/03/26 14:22:03 bjornw - * Namechange of some config options - * - * Revision 1.4 2001/02/27 13:52:48 bjornw - * malloc.h -> slab.h - * - * Revision 1.3 2001/01/24 15:06:48 bjornw - * gpio_wq correct type - * - * Revision 1.2 2001/01/18 16:07:30 bjornw - * 2.4 port - * - * Revision 1.1 2001/01/18 15:55:16 bjornw - * Verbatim copy of etraxgpio.c from elinux 2.0 added - * - * */ @@ -165,7 +38,7 @@ static int dp_cnt; #else #define DP(x) #endif - + static char gpio_name[] = "etrax gpio"; #if 0 @@ -173,9 +46,9 @@ static wait_queue_head_t *gpio_wq; #endif static int gpio_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg); -static ssize_t gpio_write(struct file * file, const char * buf, size_t count, - loff_t *off); + unsigned int cmd, unsigned long arg); +static ssize_t gpio_write(struct file *file, const char __user *buf, + size_t count, loff_t *off); static int gpio_open(struct inode *inode, struct file *filp); static int gpio_release(struct inode *inode, struct file *filp); static unsigned int gpio_poll(struct file *filp, struct poll_table_struct *wait); @@ -201,22 +74,22 @@ struct gpio_private { /* linked list of alarms to check for */ -static struct gpio_private *alarmlist = 0; +static struct gpio_private *alarmlist; -static int gpio_some_alarms = 0; /* Set if someone uses alarm */ -static unsigned long gpio_pa_irq_enabled_mask = 0; +static int gpio_some_alarms; /* Set if someone uses alarm */ +static unsigned long gpio_pa_irq_enabled_mask; static DEFINE_SPINLOCK(gpio_lock); /* Protect directions etc */ /* Port A and B use 8 bit access, but Port G is 32 bit */ #define NUM_PORTS (GPIO_MINOR_B+1) -static volatile unsigned char *ports[NUM_PORTS] = { - R_PORT_PA_DATA, +static volatile unsigned char *ports[NUM_PORTS] = { + R_PORT_PA_DATA, R_PORT_PB_DATA, }; static volatile unsigned char *shads[NUM_PORTS] = { - &port_pa_data_shadow, + &port_pa_data_shadow, &port_pb_data_shadow }; @@ -236,29 +109,29 @@ static volatile unsigned char *shads[NUM_PORTS] = { #endif -static unsigned char changeable_dir[NUM_PORTS] = { +static unsigned char changeable_dir[NUM_PORTS] = { CONFIG_ETRAX_PA_CHANGEABLE_DIR, - CONFIG_ETRAX_PB_CHANGEABLE_DIR + CONFIG_ETRAX_PB_CHANGEABLE_DIR }; -static unsigned char changeable_bits[NUM_PORTS] = { +static unsigned char changeable_bits[NUM_PORTS] = { CONFIG_ETRAX_PA_CHANGEABLE_BITS, - CONFIG_ETRAX_PB_CHANGEABLE_BITS + CONFIG_ETRAX_PB_CHANGEABLE_BITS }; -static volatile unsigned char *dir[NUM_PORTS] = { - R_PORT_PA_DIR, - R_PORT_PB_DIR +static volatile unsigned char *dir[NUM_PORTS] = { + R_PORT_PA_DIR, + R_PORT_PB_DIR }; static volatile unsigned char *dir_shadow[NUM_PORTS] = { - &port_pa_dir_shadow, - &port_pb_dir_shadow + &port_pa_dir_shadow, + &port_pb_dir_shadow }; /* All bits in port g that can change dir. */ static const unsigned long int changeable_dir_g_mask = 0x01FFFF01; -/* Port G is 32 bit, handle it special, some bits are both inputs +/* Port G is 32 bit, handle it special, some bits are both inputs and outputs at the same time, only some of the bits can change direction and some of them in groups of 8 bit. */ static unsigned long changeable_dir_g; @@ -269,18 +142,17 @@ static unsigned long dir_g_shadow; /* 1=output */ #define USE_PORTS(priv) ((priv)->minor <= GPIO_MINOR_B) - -static unsigned int -gpio_poll(struct file *file, - poll_table *wait) +static unsigned int gpio_poll(struct file *file, poll_table *wait) { unsigned int mask = 0; - struct gpio_private *priv = (struct gpio_private *)file->private_data; + struct gpio_private *priv = file->private_data; unsigned long data; - spin_lock(&gpio_lock); + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + poll_wait(file, &priv->alarm_wq, wait); if (priv->minor == GPIO_MINOR_A) { - unsigned long flags; unsigned long tmp; data = *R_PORT_PA_DATA; /* PA has support for high level interrupt - @@ -288,27 +160,25 @@ gpio_poll(struct file *file, */ tmp = ~data & priv->highalarm & 0xFF; tmp = (tmp << R_IRQ_MASK1_SET__pa0__BITNR); - local_irq_save(flags); + gpio_pa_irq_enabled_mask |= tmp; *R_IRQ_MASK1_SET = tmp; - local_irq_restore(flags); - } else if (priv->minor == GPIO_MINOR_B) data = *R_PORT_PB_DATA; else if (priv->minor == GPIO_MINOR_G) data = *R_PORT_G_DATA; else { - spin_unlock(&gpio_lock); - return 0; + mask = 0; + goto out; } - + if ((data & priv->highalarm) || (~data & priv->lowalarm)) { mask = POLLIN|POLLRDNORM; } - spin_unlock(&gpio_lock); - +out: + spin_unlock_irqrestore(&gpio_lock, flags); DP(printk("gpio_poll ready: mask 0x%08X\n", mask)); return mask; @@ -316,16 +186,19 @@ gpio_poll(struct file *file, int etrax_gpio_wake_up_check(void) { - struct gpio_private *priv = alarmlist; + struct gpio_private *priv; unsigned long data = 0; int ret = 0; - spin_lock(&gpio_lock); + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + priv = alarmlist; while (priv) { - if (USE_PORTS(priv)) { + if (USE_PORTS(priv)) data = *priv->port; - } else if (priv->minor == GPIO_MINOR_G) { + else if (priv->minor == GPIO_MINOR_G) data = *R_PORT_G_DATA; - } + if ((data & priv->highalarm) || (~data & priv->lowalarm)) { DP(printk("etrax_gpio_wake_up_check %i\n",priv->minor)); @@ -334,12 +207,12 @@ int etrax_gpio_wake_up_check(void) } priv = priv->next; } - spin_unlock(&gpio_lock); + spin_unlock_irqrestore(&gpio_lock, flags); return ret; } static irqreturn_t -gpio_poll_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +gpio_poll_timer_interrupt(int irq, void *dev_id) { if (gpio_some_alarms) { etrax_gpio_wake_up_check(); @@ -349,10 +222,13 @@ gpio_poll_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) } static irqreturn_t -gpio_pa_interrupt(int irq, void *dev_id, struct pt_regs *regs) +gpio_interrupt(int irq, void *dev_id) { unsigned long tmp; - spin_lock(&gpio_lock); + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + /* Find what PA interrupts are active */ tmp = (*R_IRQ_READ1); @@ -363,75 +239,70 @@ gpio_pa_interrupt(int irq, void *dev_id, struct pt_regs *regs) *R_IRQ_MASK1_CLR = tmp; gpio_pa_irq_enabled_mask &= ~tmp; - spin_unlock(&gpio_lock); + spin_unlock_irqrestore(&gpio_lock, flags); - if (gpio_some_alarms) { + if (gpio_some_alarms) return IRQ_RETVAL(etrax_gpio_wake_up_check()); - } + return IRQ_NONE; } +static void gpio_write_bit(struct gpio_private *priv, + unsigned char data, int bit) +{ + *priv->port = *priv->shadow &= ~(priv->clk_mask); + if (data & 1 << bit) + *priv->port = *priv->shadow |= priv->data_mask; + else + *priv->port = *priv->shadow &= ~(priv->data_mask); + + /* For FPGA: min 5.0ns (DCC) before CCLK high */ + *priv->port = *priv->shadow |= priv->clk_mask; +} -static ssize_t gpio_write(struct file * file, const char * buf, size_t count, - loff_t *off) +static void gpio_write_byte(struct gpio_private *priv, unsigned char data) { - struct gpio_private *priv = (struct gpio_private *)file->private_data; - unsigned char data, clk_mask, data_mask, write_msb; - unsigned long flags; + int i; - spin_lock(&gpio_lock); + if (priv->write_msb) + for (i = 7; i >= 0; i--) + gpio_write_bit(priv, data, i); + else + for (i = 0; i <= 7; i++) + gpio_write_bit(priv, data, i); +} +static ssize_t gpio_write(struct file *file, const char __user *buf, + size_t count, loff_t *off) +{ + struct gpio_private *priv = file->private_data; + unsigned long flags; ssize_t retval = count; - if (priv->minor !=GPIO_MINOR_A && priv->minor != GPIO_MINOR_B) { - retval = -EFAULT; - goto out; - } - - if (!access_ok(VERIFY_READ, buf, count)) { - retval = -EFAULT; - goto out; - } - clk_mask = priv->clk_mask; - data_mask = priv->data_mask; + + if (priv->minor != GPIO_MINOR_A && priv->minor != GPIO_MINOR_B) + return -EFAULT; + + if (!access_ok(VERIFY_READ, buf, count)) + return -EFAULT; + + spin_lock_irqsave(&gpio_lock, flags); + /* It must have been configured using the IO_CFG_WRITE_MODE */ /* Perhaps a better error code? */ - if (clk_mask == 0 || data_mask == 0) { + if (priv->clk_mask == 0 || priv->data_mask == 0) { retval = -EPERM; goto out; } - write_msb = priv->write_msb; - D(printk("gpio_write: %lu to data 0x%02X clk 0x%02X msb: %i\n",count, data_mask, clk_mask, write_msb)); - while (count--) { - int i; - data = *buf++; - if (priv->write_msb) { - for (i = 7; i >= 0;i--) { - local_irq_save(flags); - *priv->port = *priv->shadow &= ~clk_mask; - if (data & 1<<i) - *priv->port = *priv->shadow |= data_mask; - else - *priv->port = *priv->shadow &= ~data_mask; - /* For FPGA: min 5.0ns (DCC) before CCLK high */ - *priv->port = *priv->shadow |= clk_mask; - local_irq_restore(flags); - } - } else { - for (i = 0; i <= 7;i++) { - local_irq_save(flags); - *priv->port = *priv->shadow &= ~clk_mask; - if (data & 1<<i) - *priv->port = *priv->shadow |= data_mask; - else - *priv->port = *priv->shadow &= ~data_mask; - /* For FPGA: min 5.0ns (DCC) before CCLK high */ - *priv->port = *priv->shadow |= clk_mask; - local_irq_restore(flags); - } - } - } + + D(printk(KERN_DEBUG "gpio_write: %02X to data 0x%02X " + "clk 0x%02X msb: %i\n", + count, priv->data_mask, priv->clk_mask, priv->write_msb)); + + while (count--) + gpio_write_byte(priv, *buf++); + out: - spin_unlock(&gpio_lock); + spin_unlock_irqrestore(&gpio_lock, flags); return retval; } @@ -442,22 +313,20 @@ gpio_open(struct inode *inode, struct file *filp) { struct gpio_private *priv; int p = iminor(inode); + unsigned long flags; if (p > GPIO_MINOR_LAST) return -EINVAL; - priv = kmalloc(sizeof(struct gpio_private), - GFP_KERNEL); + priv = kzalloc(sizeof(struct gpio_private), GFP_KERNEL); if (!priv) return -ENOMEM; priv->minor = p; - /* initialize the io/alarm struct and link it into our alarmlist */ + /* initialize the io/alarm struct */ - priv->next = alarmlist; - alarmlist = priv; if (USE_PORTS(priv)) { /* A and B */ priv->port = ports[p]; priv->shadow = shads[p]; @@ -480,7 +349,13 @@ gpio_open(struct inode *inode, struct file *filp) priv->data_mask = 0; init_waitqueue_head(&priv->alarm_wq); - filp->private_data = (void *)priv; + filp->private_data = priv; + + /* link it into our alarmlist */ + spin_lock_irqsave(&gpio_lock, flags); + priv->next = alarmlist; + alarmlist = priv; + spin_unlock_irqrestore(&gpio_lock, flags); return 0; } @@ -490,11 +365,12 @@ gpio_release(struct inode *inode, struct file *filp) { struct gpio_private *p; struct gpio_private *todel; + unsigned long flags; - spin_lock(&gpio_lock); + spin_lock_irqsave(&gpio_lock, flags); - p = alarmlist; - todel = (struct gpio_private *)filp->private_data; + p = alarmlist; + todel = filp->private_data; /* unlink from alarmlist and free the private structure */ @@ -512,123 +388,114 @@ gpio_release(struct inode *inode, struct file *filp) while (p) { if (p->highalarm | p->lowalarm) { gpio_some_alarms = 1; - spin_unlock(&gpio_lock); - return 0; + goto out; } p = p->next; } gpio_some_alarms = 0; - spin_unlock(&gpio_lock); +out: + spin_unlock_irqrestore(&gpio_lock, flags); return 0; } -/* Main device API. ioctl's to read/set/clear bits, as well as to +/* Main device API. ioctl's to read/set/clear bits, as well as to * set alarms to wait for using a subsequent select(). */ - unsigned long inline setget_input(struct gpio_private *priv, unsigned long arg) { - /* Set direction 0=unchanged 1=input, - * return mask with 1=input - */ - unsigned long flags; + /* Set direction 0=unchanged 1=input, + * return mask with 1=input */ if (USE_PORTS(priv)) { - local_irq_save(flags); - *priv->dir = *priv->dir_shadow &= + *priv->dir = *priv->dir_shadow &= ~((unsigned char)arg & priv->changeable_dir); - local_irq_restore(flags); return ~(*priv->dir_shadow) & 0xFF; /* Only 8 bits */ - } else if (priv->minor == GPIO_MINOR_G) { - /* We must fiddle with R_GEN_CONFIG to change dir */ - local_irq_save(flags); - if (((arg & dir_g_in_bits) != arg) && - (arg & changeable_dir_g)) { - arg &= changeable_dir_g; - /* Clear bits in genconfig to set to input */ - if (arg & (1<<0)) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG,g0dir); - dir_g_in_bits |= (1<<0); - dir_g_out_bits &= ~(1<<0); - } - if ((arg & 0x0000FF00) == 0x0000FF00) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG,g8_15dir); - dir_g_in_bits |= 0x0000FF00; - dir_g_out_bits &= ~0x0000FF00; - } - if ((arg & 0x00FF0000) == 0x00FF0000) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG,g16_23dir); - dir_g_in_bits |= 0x00FF0000; - dir_g_out_bits &= ~0x00FF0000; - } - if (arg & (1<<24)) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG,g24dir); - dir_g_in_bits |= (1<<24); - dir_g_out_bits &= ~(1<<24); - } - D(printk(KERN_INFO "gpio: SETINPUT on port G set " - "genconfig to 0x%08lX " - "in_bits: 0x%08lX " - "out_bits: 0x%08lX\n", - (unsigned long)genconfig_shadow, - dir_g_in_bits, dir_g_out_bits)); - *R_GEN_CONFIG = genconfig_shadow; - /* Must be a >120 ns delay before writing this again */ - + } + + if (priv->minor != GPIO_MINOR_G) + return 0; + + /* We must fiddle with R_GEN_CONFIG to change dir */ + if (((arg & dir_g_in_bits) != arg) && + (arg & changeable_dir_g)) { + arg &= changeable_dir_g; + /* Clear bits in genconfig to set to input */ + if (arg & (1<<0)) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, g0dir); + dir_g_in_bits |= (1<<0); + dir_g_out_bits &= ~(1<<0); } - local_irq_restore(flags); - return dir_g_in_bits; + if ((arg & 0x0000FF00) == 0x0000FF00) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, g8_15dir); + dir_g_in_bits |= 0x0000FF00; + dir_g_out_bits &= ~0x0000FF00; + } + if ((arg & 0x00FF0000) == 0x00FF0000) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, g16_23dir); + dir_g_in_bits |= 0x00FF0000; + dir_g_out_bits &= ~0x00FF0000; + } + if (arg & (1<<24)) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, g24dir); + dir_g_in_bits |= (1<<24); + dir_g_out_bits &= ~(1<<24); + } + D(printk(KERN_DEBUG "gpio: SETINPUT on port G set " + "genconfig to 0x%08lX " + "in_bits: 0x%08lX " + "out_bits: 0x%08lX\n", + (unsigned long)genconfig_shadow, + dir_g_in_bits, dir_g_out_bits)); + *R_GEN_CONFIG = genconfig_shadow; + /* Must be a >120 ns delay before writing this again */ + } - return 0; + return dir_g_in_bits; } /* setget_input */ unsigned long inline setget_output(struct gpio_private *priv, unsigned long arg) { - unsigned long flags; if (USE_PORTS(priv)) { - local_irq_save(flags); - *priv->dir = *priv->dir_shadow |= - ((unsigned char)arg & priv->changeable_dir); - local_irq_restore(flags); + *priv->dir = *priv->dir_shadow |= + ((unsigned char)arg & priv->changeable_dir); return *priv->dir_shadow; - } else if (priv->minor == GPIO_MINOR_G) { - /* We must fiddle with R_GEN_CONFIG to change dir */ - local_irq_save(flags); - if (((arg & dir_g_out_bits) != arg) && - (arg & changeable_dir_g)) { - /* Set bits in genconfig to set to output */ - if (arg & (1<<0)) { - genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g0dir); - dir_g_out_bits |= (1<<0); - dir_g_in_bits &= ~(1<<0); - } - if ((arg & 0x0000FF00) == 0x0000FF00) { - genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g8_15dir); - dir_g_out_bits |= 0x0000FF00; - dir_g_in_bits &= ~0x0000FF00; - } - if ((arg & 0x00FF0000) == 0x00FF0000) { - genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g16_23dir); - dir_g_out_bits |= 0x00FF0000; - dir_g_in_bits &= ~0x00FF0000; - } - if (arg & (1<<24)) { - genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g24dir); - dir_g_out_bits |= (1<<24); - dir_g_in_bits &= ~(1<<24); - } - D(printk(KERN_INFO "gpio: SETOUTPUT on port G set " - "genconfig to 0x%08lX " - "in_bits: 0x%08lX " - "out_bits: 0x%08lX\n", - (unsigned long)genconfig_shadow, - dir_g_in_bits, dir_g_out_bits)); - *R_GEN_CONFIG = genconfig_shadow; - /* Must be a >120 ns delay before writing this again */ + } + if (priv->minor != GPIO_MINOR_G) + return 0; + + /* We must fiddle with R_GEN_CONFIG to change dir */ + if (((arg & dir_g_out_bits) != arg) && + (arg & changeable_dir_g)) { + /* Set bits in genconfig to set to output */ + if (arg & (1<<0)) { + genconfig_shadow |= IO_MASK(R_GEN_CONFIG, g0dir); + dir_g_out_bits |= (1<<0); + dir_g_in_bits &= ~(1<<0); } - local_irq_restore(flags); - return dir_g_out_bits & 0x7FFFFFFF; + if ((arg & 0x0000FF00) == 0x0000FF00) { + genconfig_shadow |= IO_MASK(R_GEN_CONFIG, g8_15dir); + dir_g_out_bits |= 0x0000FF00; + dir_g_in_bits &= ~0x0000FF00; + } + if ((arg & 0x00FF0000) == 0x00FF0000) { + genconfig_shadow |= IO_MASK(R_GEN_CONFIG, g16_23dir); + dir_g_out_bits |= 0x00FF0000; + dir_g_in_bits &= ~0x00FF0000; + } + if (arg & (1<<24)) { + genconfig_shadow |= IO_MASK(R_GEN_CONFIG, g24dir); + dir_g_out_bits |= (1<<24); + dir_g_in_bits &= ~(1<<24); + } + D(printk(KERN_INFO "gpio: SETOUTPUT on port G set " + "genconfig to 0x%08lX " + "in_bits: 0x%08lX " + "out_bits: 0x%08lX\n", + (unsigned long)genconfig_shadow, + dir_g_in_bits, dir_g_out_bits)); + *R_GEN_CONFIG = genconfig_shadow; + /* Must be a >120 ns delay before writing this again */ } - return 0; + return dir_g_out_bits & 0x7FFFFFFF; } /* setget_output */ static int @@ -642,12 +509,11 @@ gpio_ioctl(struct inode *inode, struct file *file, unsigned long val; int ret = 0; - struct gpio_private *priv = (struct gpio_private *)file->private_data; - if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE) { + struct gpio_private *priv = file->private_data; + if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE) return -EINVAL; - } - spin_lock(&gpio_lock); + spin_lock_irqsave(&gpio_lock, flags); switch (_IOC_NR(cmd)) { case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */ @@ -659,7 +525,6 @@ gpio_ioctl(struct inode *inode, struct file *file, } break; case IO_SETBITS: - local_irq_save(flags); // set changeable bits with a 1 in arg if (USE_PORTS(priv)) { *priv->port = *priv->shadow |= @@ -667,10 +532,8 @@ gpio_ioctl(struct inode *inode, struct file *file, } else if (priv->minor == GPIO_MINOR_G) { *R_PORT_G_DATA = port_g_data_shadow |= (arg & dir_g_out_bits); } - local_irq_restore(flags); break; case IO_CLRBITS: - local_irq_save(flags); // clear changeable bits with a 1 in arg if (USE_PORTS(priv)) { *priv->port = *priv->shadow &= @@ -678,7 +541,6 @@ gpio_ioctl(struct inode *inode, struct file *file, } else if (priv->minor == GPIO_MINOR_G) { *R_PORT_G_DATA = port_g_data_shadow &= ~((unsigned long)arg & dir_g_out_bits); } - local_irq_restore(flags); break; case IO_HIGHALARM: // set alarm when bits with 1 in arg go high @@ -698,6 +560,8 @@ gpio_ioctl(struct inode *inode, struct file *file, /* Must update gpio_some_alarms */ struct gpio_private *p = alarmlist; int some_alarms; + spin_lock_irq(&gpio_lock); + p = alarmlist; some_alarms = 0; while (p) { if (p->highalarm | p->lowalarm) { @@ -707,6 +571,7 @@ gpio_ioctl(struct inode *inode, struct file *file, p = p->next; } gpio_some_alarms = some_alarms; + spin_unlock_irq(&gpio_lock); } break; case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */ @@ -766,7 +631,7 @@ gpio_ioctl(struct inode *inode, struct file *file, } else if (priv->minor == GPIO_MINOR_G) { val = *R_PORT_G_DATA; } - if (copy_to_user((unsigned long*)arg, &val, sizeof(val))) + if (copy_to_user((void __user *)arg, &val, sizeof(val))) ret = -EFAULT; break; case IO_READ_OUTBITS: @@ -776,33 +641,32 @@ gpio_ioctl(struct inode *inode, struct file *file, } else if (priv->minor == GPIO_MINOR_G) { val = port_g_data_shadow; } - if (copy_to_user((unsigned long*)arg, &val, sizeof(val))) + if (copy_to_user((void __user *)arg, &val, sizeof(val))) ret = -EFAULT; break; case IO_SETGET_INPUT: /* bits set in *arg is set to input, * *arg updated with current input pins. */ - if (copy_from_user(&val, (unsigned long*)arg, sizeof(val))) + if (copy_from_user(&val, (void __user *)arg, sizeof(val))) { ret = -EFAULT; break; } val = setget_input(priv, val); - if (copy_to_user((unsigned long*)arg, &val, sizeof(val))) + if (copy_to_user((void __user *)arg, &val, sizeof(val))) ret = -EFAULT; break; case IO_SETGET_OUTPUT: /* bits set in *arg is set to output, * *arg updated with current output pins. */ - if (copy_from_user(&val, (unsigned long*)arg, sizeof(val))) - { + if (copy_from_user(&val, (void __user *)arg, sizeof(val))) { ret = -EFAULT; break; } val = setget_output(priv, val); - if (copy_to_user((unsigned long*)arg, &val, sizeof(val))) + if (copy_to_user((void __user *)arg, &val, sizeof(val))) ret = -EFAULT; break; default: @@ -812,7 +676,7 @@ gpio_ioctl(struct inode *inode, struct file *file, ret = -EINVAL; } /* switch */ - spin_unlock(&gpio_lock); + spin_unlock_irqrestore(&gpio_lock, flags); return ret; } @@ -824,18 +688,18 @@ gpio_leds_ioctl(unsigned int cmd, unsigned long arg) switch (_IOC_NR(cmd)) { case IO_LEDACTIVE_SET: - green = ((unsigned char) arg) & 1; - red = (((unsigned char) arg) >> 1) & 1; - LED_ACTIVE_SET_G(green); - LED_ACTIVE_SET_R(red); + green = ((unsigned char)arg) & 1; + red = (((unsigned char)arg) >> 1) & 1; + CRIS_LED_ACTIVE_SET_G(green); + CRIS_LED_ACTIVE_SET_R(red); break; case IO_LED_SETBIT: - LED_BIT_SET(arg); + CRIS_LED_BIT_SET(arg); break; case IO_LED_CLRBIT: - LED_BIT_CLR(arg); + CRIS_LED_BIT_CLR(arg); break; default: @@ -845,7 +709,7 @@ gpio_leds_ioctl(unsigned int cmd, unsigned long arg) return 0; } -const struct file_operations gpio_fops = { +static const struct file_operations gpio_fops = { .owner = THIS_MODULE, .poll = gpio_poll, .ioctl = gpio_ioctl, @@ -854,16 +718,18 @@ const struct file_operations gpio_fops = { .release = gpio_release, }; - -void ioif_watcher(const unsigned int gpio_in_available, - const unsigned int gpio_out_available, - const unsigned char pa_available, - const unsigned char pb_available) +static void ioif_watcher(const unsigned int gpio_in_available, + const unsigned int gpio_out_available, + const unsigned char pa_available, + const unsigned char pb_available) { unsigned long int flags; - D(printk("gpio.c: ioif_watcher called\n")); - D(printk("gpio.c: G in: 0x%08x G out: 0x%08x PA: 0x%02x PB: 0x%02x\n", - gpio_in_available, gpio_out_available, pa_available, pb_available)); + + D(printk(KERN_DEBUG "gpio.c: ioif_watcher called\n")); + D(printk(KERN_DEBUG "gpio.c: G in: 0x%08x G out: 0x%08x " + "PA: 0x%02x PB: 0x%02x\n", + gpio_in_available, gpio_out_available, + pa_available, pb_available)); spin_lock_irqsave(&gpio_lock, flags); @@ -872,7 +738,7 @@ void ioif_watcher(const unsigned int gpio_in_available, /* Initialise the dir_g_shadow etc. depending on genconfig */ /* 0=input 1=output */ - if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, g0dir, out)) + if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, g0dir, out)) dir_g_shadow |= (1 << 0); if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, g8_15dir, out)) dir_g_shadow |= 0x0000FF00; @@ -884,7 +750,8 @@ void ioif_watcher(const unsigned int gpio_in_available, changeable_dir_g = changeable_dir_g_mask; changeable_dir_g &= dir_g_out_bits; changeable_dir_g &= dir_g_in_bits; - /* Correct the bits that can change direction */ + + /* Correct the bits that can change direction */ dir_g_out_bits &= ~changeable_dir_g; dir_g_out_bits |= dir_g_shadow; dir_g_in_bits &= ~changeable_dir_g; @@ -892,7 +759,8 @@ void ioif_watcher(const unsigned int gpio_in_available, spin_unlock_irqrestore(&gpio_lock, flags); - printk(KERN_INFO "GPIO port G: in_bits: 0x%08lX out_bits: 0x%08lX val: %08lX\n", + printk(KERN_INFO "GPIO port G: in_bits: 0x%08lX out_bits: 0x%08lX " + "val: %08lX\n", dir_g_in_bits, dir_g_out_bits, (unsigned long)*R_PORT_G_DATA); printk(KERN_INFO "GPIO port G: dir: %08lX changeable: %08lX\n", dir_g_shadow, changeable_dir_g); @@ -900,16 +768,12 @@ void ioif_watcher(const unsigned int gpio_in_available, /* main driver initialization routine, called from mem.c */ -static __init int -gpio_init(void) +static int __init gpio_init(void) { int res; #if defined (CONFIG_ETRAX_CSP0_LEDS) int i; #endif - printk("gpio init\n"); - - /* do the formalities */ res = register_chrdev(GPIO_MAJOR, gpio_name, &gpio_fops); if (res < 0) { @@ -919,43 +783,45 @@ gpio_init(void) /* Clear all leds */ #if defined (CONFIG_ETRAX_CSP0_LEDS) || defined (CONFIG_ETRAX_PA_LEDS) || defined (CONFIG_ETRAX_PB_LEDS) - LED_NETWORK_SET(0); - LED_ACTIVE_SET(0); - LED_DISK_READ(0); - LED_DISK_WRITE(0); + CRIS_LED_NETWORK_SET(0); + CRIS_LED_ACTIVE_SET(0); + CRIS_LED_DISK_READ(0); + CRIS_LED_DISK_WRITE(0); #if defined (CONFIG_ETRAX_CSP0_LEDS) - for (i = 0; i < 32; i++) { - LED_BIT_SET(i); - } + for (i = 0; i < 32; i++) + CRIS_LED_BIT_SET(i); #endif #endif /* The I/O interface allocation watcher will be called when * registering it. */ if (cris_io_interface_register_watcher(ioif_watcher)){ - printk(KERN_WARNING "gpio_init: Failed to install IO if allocator watcher\n"); + printk(KERN_WARNING "gpio_init: Failed to install IO " + "if allocator watcher\n"); } - printk(KERN_INFO "ETRAX 100LX GPIO driver v2.5, (c) 2001, 2002, 2003, 2004 Axis Communications AB\n"); + printk(KERN_INFO "ETRAX 100LX GPIO driver v2.5, (c) 2001-2008 " + "Axis Communications AB\n"); /* We call etrax_gpio_wake_up_check() from timer interrupt and * from cpu_idle() in kernel/process.c * The check in cpu_idle() reduces latency from ~15 ms to ~6 ms * in some tests. - */ - if (request_irq(TIMER0_IRQ_NBR, gpio_poll_timer_interrupt, - IRQF_SHARED | IRQF_DISABLED,"gpio poll", NULL)) { + */ + res = request_irq(TIMER0_IRQ_NBR, gpio_poll_timer_interrupt, + IRQF_SHARED | IRQF_DISABLED, "gpio poll", gpio_name); + if (res) { printk(KERN_CRIT "err: timer0 irq for gpio\n"); + return res; } - if (request_irq(PA_IRQ_NBR, gpio_pa_interrupt, - IRQF_SHARED | IRQF_DISABLED,"gpio PA", NULL)) { + res = request_irq(PA_IRQ_NBR, gpio_interrupt, + IRQF_SHARED | IRQF_DISABLED, "gpio PA", gpio_name); + if (res) printk(KERN_CRIT "err: PA irq for gpio\n"); - } - return res; } /* this makes sure that gpio_init is called during kernel boot */ - module_init(gpio_init); + diff --git a/arch/cris/arch-v10/drivers/i2c.c b/arch/cris/arch-v10/drivers/i2c.c index aca81ddaf60f..d6d22067d0c8 100644 --- a/arch/cris/arch-v10/drivers/i2c.c +++ b/arch/cris/arch-v10/drivers/i2c.c @@ -6,85 +6,9 @@ *! kernel modules (i2c_writereg/readreg) and from userspace using *! ioctl()'s *! -*! Nov 30 1998 Torbjorn Eliasson Initial version. -*! Bjorn Wesen Elinux kernel version. -*! Jan 14 2000 Johan Adolfsson Fixed PB shadow register stuff - -*! don't use PB_I2C if DS1302 uses same bits, -*! use PB. -*! $Log: i2c.c,v $ -*! Revision 1.13 2005/03/07 13:13:07 starvik -*! Added spinlocks to protect states etc -*! -*! Revision 1.12 2005/01/05 06:11:22 starvik -*! No need to do local_irq_disable after local_irq_save. -*! -*! Revision 1.11 2004/12/13 12:21:52 starvik -*! Added I/O and DMA allocators from Linux 2.4 -*! -*! Revision 1.9 2004/08/24 06:49:14 starvik -*! Whitespace cleanup -*! -*! Revision 1.8 2004/06/08 08:48:26 starvik -*! Removed unused code -*! -*! Revision 1.7 2004/05/28 09:26:59 starvik -*! Modified I2C initialization to work in 2.6. -*! -*! Revision 1.6 2004/05/14 07:58:03 starvik -*! Merge of changes from 2.4 -*! -*! Revision 1.4 2002/12/11 13:13:57 starvik -*! Added arch/ to v10 specific includes -*! Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer) -*! -*! Revision 1.3 2002/11/20 11:56:11 starvik -*! Merge of Linux 2.5.48 -*! -*! Revision 1.2 2002/11/18 13:16:06 starvik -*! Linux 2.5 port of latest 2.4 drivers -*! -*! Revision 1.9 2002/10/31 15:32:26 starvik -*! Update Port B register and shadow even when running with hardware support -*! to avoid glitches when reading bits -*! Never set direction to out in i2c_inbyte -*! Removed incorrect clock toggling at end of i2c_inbyte -*! -*! Revision 1.8 2002/08/13 06:31:53 starvik -*! Made SDA and SCL line configurable -*! Modified i2c_inbyte to work with PCF8563 -*! -*! Revision 1.7 2001/04/04 13:11:36 markusl -*! Updated according to review remarks -*! -*! Revision 1.6 2001/03/19 12:43:00 markusl -*! Made some symbols unstatic (used by the eeprom driver) -*! -*! Revision 1.5 2001/02/27 13:52:48 bjornw -*! malloc.h -> slab.h -*! -*! Revision 1.4 2001/02/15 07:17:40 starvik -*! Corrected usage if port_pb_i2c_shadow -*! -*! Revision 1.3 2001/01/26 17:55:13 bjornw -*! * Made I2C_USES_PB_NOT_PB_I2C a CONFIG option instead of assigning it -*! magically. Config.in needs to set it for the options that need it, like -*! Dallas 1302 support. Actually, it should be default since it screws up -*! the PB bits even if you don't use I2C.. -*! * Include linux/config.h to get the above -*! -*! Revision 1.2 2001/01/18 15:49:30 bjornw -*! 2.4 port of I2C including some cleanups (untested of course) -*! -*! Revision 1.1 2001/01/18 15:35:25 bjornw -*! Verbatim copy of the Etrax i2c driver, 2.0 elinux version -*! -*! -*! --------------------------------------------------------------------------- -*! -*! (C) Copyright 1999-2002 Axis Communications AB, LUND, SWEDEN +*! (C) Copyright 1999-2007 Axis Communications AB, LUND, SWEDEN *! *!***************************************************************************/ -/* $Id: i2c.c,v 1.13 2005/03/07 13:13:07 starvik Exp $ */ /****************** INCLUDE FILES SECTION ***********************************/ @@ -622,7 +546,7 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg) * last received byte needs to be nacked * instead of acked */ - i2c_sendack(); + i2c_sendnack(); /* * end sequence */ @@ -708,6 +632,7 @@ i2c_init(void) if (!first) { return res; } + first = 0; /* Setup and enable the Port B I2C interface */ diff --git a/arch/cris/arch-v10/drivers/pcf8563.c b/arch/cris/arch-v10/drivers/pcf8563.c index c263b8232dbc..52103d16dc6c 100644 --- a/arch/cris/arch-v10/drivers/pcf8563.c +++ b/arch/cris/arch-v10/drivers/pcf8563.c @@ -8,14 +8,13 @@ * low detector are also provided. All address and data are transferred * serially via two-line bidirectional I2C-bus. Maximum bus speed is * 400 kbits/s. The built-in word address register is incremented - * automatically after each written or read bute. + * automatically after each written or read byte. * - * Copyright (c) 2002, Axis Communications AB + * Copyright (c) 2002-2007, Axis Communications AB * All rights reserved. * * Author: Tobias Anderberg <tobiasa@axis.com>. * - * $Id: pcf8563.c,v 1.11 2005/03/07 13:13:07 starvik Exp $ */ #include <linux/module.h> @@ -27,19 +26,19 @@ #include <linux/ioctl.h> #include <linux/delay.h> #include <linux/bcd.h> -#include <linux/capability.h> +#include <linux/mutex.h> #include <asm/uaccess.h> #include <asm/system.h> #include <asm/io.h> -#include <asm/arch/svinto.h> #include <asm/rtc.h> + #include "i2c.h" -#define PCF8563_MAJOR 121 /* Local major number. */ -#define DEVICE_NAME "rtc" /* Name which is registered in /proc/devices. */ +#define PCF8563_MAJOR 121 /* Local major number. */ +#define DEVICE_NAME "rtc" /* Name which is registered in /proc/devices. */ #define PCF8563_NAME "PCF8563" -#define DRIVER_VERSION "$Revision: 1.11 $" +#define DRIVER_VERSION "$Revision: 1.24 $" /* I2C bus slave registers. */ #define RTC_I2C_READ 0xa3 @@ -49,71 +48,88 @@ #define rtc_read(x) i2c_readreg(RTC_I2C_READ, x) #define rtc_write(x,y) i2c_writereg(RTC_I2C_WRITE, x, y) -static DEFINE_SPINLOCK(rtc_lock); /* Protect state etc */ - +static DEFINE_MUTEX(rtc_lock); /* Protect state etc */ + static const unsigned char days_in_month[] = { 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 }; int pcf8563_ioctl(struct inode *, struct file *, unsigned int, unsigned long); +/* Cache VL bit value read at driver init since writing the RTC_SECOND + * register clears the VL status. + */ +static int voltage_low; + static const struct file_operations pcf8563_fops = { .owner = THIS_MODULE, .ioctl = pcf8563_ioctl, }; unsigned char -pcf8563_readreg(int reg) +pcf8563_readreg(int reg) { - unsigned char res = i2c_readreg(RTC_I2C_READ, reg); - - /* The PCF8563 does not return 0 for unimplemented bits */ - switch(reg) - { - case RTC_SECONDS: - case RTC_MINUTES: - res &= 0x7f; - break; - case RTC_HOURS: - case RTC_DAY_OF_MONTH: - res &= 0x3f; - break; - case RTC_MONTH: - res = (res & 0x1f) - 1; /* PCF8563 returns month in range 1-12 */ - break; + unsigned char res = rtc_read(reg); + + /* The PCF8563 does not return 0 for unimplemented bits. */ + switch (reg) { + case RTC_SECONDS: + case RTC_MINUTES: + res &= 0x7F; + break; + case RTC_HOURS: + case RTC_DAY_OF_MONTH: + res &= 0x3F; + break; + case RTC_WEEKDAY: + res &= 0x07; + break; + case RTC_MONTH: + res &= 0x1F; + break; + case RTC_CONTROL1: + res &= 0xA8; + break; + case RTC_CONTROL2: + res &= 0x1F; + break; + case RTC_CLOCKOUT_FREQ: + case RTC_TIMER_CONTROL: + res &= 0x83; + break; } return res; } void -pcf8563_writereg(int reg, unsigned char val) +pcf8563_writereg(int reg, unsigned char val) { -#ifdef CONFIG_ETRAX_RTC_READONLY - if (reg == RTC_CONTROL1 || (reg >= RTC_SECONDS && reg <= RTC_YEAR)) - return; -#endif - rtc_write(reg, val); } void get_rtc_time(struct rtc_time *tm) { - tm->tm_sec = rtc_read(RTC_SECONDS); - tm->tm_min = rtc_read(RTC_MINUTES); + tm->tm_sec = rtc_read(RTC_SECONDS); + tm->tm_min = rtc_read(RTC_MINUTES); tm->tm_hour = rtc_read(RTC_HOURS); tm->tm_mday = rtc_read(RTC_DAY_OF_MONTH); - tm->tm_mon = rtc_read(RTC_MONTH); + tm->tm_wday = rtc_read(RTC_WEEKDAY); + tm->tm_mon = rtc_read(RTC_MONTH); tm->tm_year = rtc_read(RTC_YEAR); - if (tm->tm_sec & 0x80) - printk(KERN_WARNING "%s: RTC Low Voltage - date/time is not reliable!\n", PCF8563_NAME); + if (tm->tm_sec & 0x80) { + printk(KERN_ERR "%s: RTC Voltage Low - reliable date/time " + "information is no longer guaranteed!\n", PCF8563_NAME); + } - tm->tm_year = BCD_TO_BIN(tm->tm_year) + ((tm->tm_mon & 0x80) ? 100 : 0); - tm->tm_sec &= 0x7f; - tm->tm_min &= 0x7f; - tm->tm_hour &= 0x3f; - tm->tm_mday &= 0x3f; - tm->tm_mon &= 0x1f; + tm->tm_year = BCD_TO_BIN(tm->tm_year) + + ((tm->tm_mon & 0x80) ? 100 : 0); + tm->tm_sec &= 0x7F; + tm->tm_min &= 0x7F; + tm->tm_hour &= 0x3F; + tm->tm_mday &= 0x3F; + tm->tm_wday &= 0x07; /* Not coded in BCD. */ + tm->tm_mon &= 0x1F; BCD_TO_BIN(tm->tm_sec); BCD_TO_BIN(tm->tm_min); @@ -126,17 +142,24 @@ get_rtc_time(struct rtc_time *tm) int __init pcf8563_init(void) { - int ret; - - if ((ret = i2c_init())) { - printk(KERN_CRIT "pcf8563_init: failed to init i2c\n"); - return ret; + static int res; + static int first = 1; + + if (!first) + return res; + first = 0; + + /* Initiate the i2c protocol. */ + res = i2c_init(); + if (res < 0) { + printk(KERN_CRIT "pcf8563_init: Failed to init i2c.\n"); + return res; } /* * First of all we need to reset the chip. This is done by - * clearing control1, control2 and clk freq, clear the - * Voltage Low bit, and resetting all alarms. + * clearing control1, control2 and clk freq and resetting + * all alarms. */ if (rtc_write(RTC_CONTROL1, 0x00) < 0) goto err; @@ -147,34 +170,36 @@ pcf8563_init(void) if (rtc_write(RTC_CLOCKOUT_FREQ, 0x00) < 0) goto err; - /* Clear the VL bit in the seconds register. */ - ret = rtc_read(RTC_SECONDS); - - if (rtc_write(RTC_SECONDS, (ret & 0x7f)) < 0) + if (rtc_write(RTC_TIMER_CONTROL, 0x03) < 0) goto err; - + /* Reset the alarms. */ - if (rtc_write(RTC_MINUTE_ALARM, 0x00) < 0) + if (rtc_write(RTC_MINUTE_ALARM, 0x80) < 0) goto err; - - if (rtc_write(RTC_HOUR_ALARM, 0x00) < 0) + + if (rtc_write(RTC_HOUR_ALARM, 0x80) < 0) goto err; - - if (rtc_write(RTC_DAY_ALARM, 0x00) < 0) + + if (rtc_write(RTC_DAY_ALARM, 0x80) < 0) goto err; - - if (rtc_write(RTC_WEEKDAY_ALARM, 0x00) < 0) + + if (rtc_write(RTC_WEEKDAY_ALARM, 0x80) < 0) goto err; - - /* Check for low voltage, and warn about it.. */ - if (rtc_read(RTC_SECONDS) & 0x80) - printk(KERN_WARNING "%s: RTC Low Voltage - date/time is not reliable!\n", PCF8563_NAME); - - return 0; + + /* Check for low voltage, and warn about it. */ + if (rtc_read(RTC_SECONDS) & 0x80) { + voltage_low = 1; + printk(KERN_WARNING "%s: RTC Voltage Low - reliable " + "date/time information is no longer guaranteed!\n", + PCF8563_NAME); + } + + return res; err: printk(KERN_INFO "%s: Error initializing chip.\n", PCF8563_NAME); - return -1; + res = -1; + return res; } void __exit @@ -187,8 +212,8 @@ pcf8563_exit(void) * ioctl calls for this driver. Why return -ENOTTY upon error? Because * POSIX says so! */ -int -pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg) +int pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, + unsigned long arg) { /* Some sanity checks. */ if (_IOC_TYPE(cmd) != RTC_MAGIC) @@ -198,124 +223,146 @@ pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned return -ENOTTY; switch (cmd) { - case RTC_RD_TIME: - { - struct rtc_time tm; - - spin_lock(&rtc_lock); - get_rtc_time(&tm); - - if (copy_to_user((struct rtc_time *) arg, &tm, sizeof(struct rtc_time))) { - spin_unlock(&rtc_lock); - return -EFAULT; - } - - spin_unlock(&rtc_lock); - return 0; - } - break; - case RTC_SET_TIME: - { -#ifdef CONFIG_ETRAX_RTC_READONLY - return -EPERM; -#else - int leap; - int century; - struct rtc_time tm; - - memset(&tm, 0, sizeof (struct rtc_time)); - if (!capable(CAP_SYS_TIME)) - return -EPERM; - - if (copy_from_user(&tm, (struct rtc_time *) arg, sizeof(struct rtc_time))) - return -EFAULT; - - /* Convert from struct tm to struct rtc_time. */ - tm.tm_year += 1900; - tm.tm_mon += 1; - - leap = ((tm.tm_mon == 2) && ((tm.tm_year % 4) == 0)) ? 1 : 0; - - /* Perform some sanity checks. */ - if ((tm.tm_year < 1970) || - (tm.tm_mon > 12) || - (tm.tm_mday == 0) || - (tm.tm_mday > days_in_month[tm.tm_mon] + leap) || - (tm.tm_hour >= 24) || - (tm.tm_min >= 60) || - (tm.tm_sec >= 60)) - return -EINVAL; - - century = (tm.tm_year >= 2000) ? 0x80 : 0; - tm.tm_year = tm.tm_year % 100; - - BIN_TO_BCD(tm.tm_year); - BIN_TO_BCD(tm.tm_mday); - BIN_TO_BCD(tm.tm_hour); - BIN_TO_BCD(tm.tm_min); - BIN_TO_BCD(tm.tm_sec); - tm.tm_mon |= century; - - spin_lock(&rtc_lock); - - rtc_write(RTC_YEAR, tm.tm_year); - rtc_write(RTC_MONTH, tm.tm_mon); - rtc_write(RTC_DAY_OF_MONTH, tm.tm_mday); - rtc_write(RTC_HOURS, tm.tm_hour); - rtc_write(RTC_MINUTES, tm.tm_min); - rtc_write(RTC_SECONDS, tm.tm_sec); - - spin_unlock(&rtc_lock); - - return 0; -#endif /* !CONFIG_ETRAX_RTC_READONLY */ - } - - case RTC_VLOW_RD: - { - int vl_bit = 0; - - if (rtc_read(RTC_SECONDS) & 0x80) { - vl_bit = 1; - printk(KERN_WARNING "%s: RTC Voltage Low - reliable " - "date/time information is no longer guaranteed!\n", - PCF8563_NAME); - } - if (copy_to_user((int *) arg, &vl_bit, sizeof(int))) - return -EFAULT; - - return 0; - } + case RTC_RD_TIME: + { + struct rtc_time tm; - case RTC_VLOW_SET: - { - /* Clear the VL bit in the seconds register */ - int ret = rtc_read(RTC_SECONDS); + mutex_lock(&rtc_lock); + memset(&tm, 0, sizeof tm); + get_rtc_time(&tm); - rtc_write(RTC_SECONDS, (ret & 0x7F)); + if (copy_to_user((struct rtc_time *) arg, &tm, + sizeof tm)) { + spin_unlock(&rtc_lock); + return -EFAULT; + } + + mutex_unlock(&rtc_lock); - return 0; + return 0; + } + case RTC_SET_TIME: + { + int leap; + int year; + int century; + struct rtc_time tm; + + memset(&tm, 0, sizeof tm); + if (!capable(CAP_SYS_TIME)) + return -EPERM; + + if (copy_from_user(&tm, (struct rtc_time *) arg, sizeof tm)) + return -EFAULT; + + /* Convert from struct tm to struct rtc_time. */ + tm.tm_year += 1900; + tm.tm_mon += 1; + + /* + * Check if tm.tm_year is a leap year. A year is a leap + * year if it is divisible by 4 but not 100, except + * that years divisible by 400 _are_ leap years. + */ + year = tm.tm_year; + leap = (tm.tm_mon == 2) && + ((year % 4 == 0 && year % 100 != 0) || year % 400 == 0); + + /* Perform some sanity checks. */ + if ((tm.tm_year < 1970) || + (tm.tm_mon > 12) || + (tm.tm_mday == 0) || + (tm.tm_mday > days_in_month[tm.tm_mon] + leap) || + (tm.tm_wday >= 7) || + (tm.tm_hour >= 24) || + (tm.tm_min >= 60) || + (tm.tm_sec >= 60)) + return -EINVAL; + + century = (tm.tm_year >= 2000) ? 0x80 : 0; + tm.tm_year = tm.tm_year % 100; + + BIN_TO_BCD(tm.tm_year); + BIN_TO_BCD(tm.tm_mon); + BIN_TO_BCD(tm.tm_mday); + BIN_TO_BCD(tm.tm_hour); + BIN_TO_BCD(tm.tm_min); + BIN_TO_BCD(tm.tm_sec); + tm.tm_mon |= century; + + mutex_lock(&rtc_lock); + + rtc_write(RTC_YEAR, tm.tm_year); + rtc_write(RTC_MONTH, tm.tm_mon); + rtc_write(RTC_WEEKDAY, tm.tm_wday); /* Not coded in BCD. */ + rtc_write(RTC_DAY_OF_MONTH, tm.tm_mday); + rtc_write(RTC_HOURS, tm.tm_hour); + rtc_write(RTC_MINUTES, tm.tm_min); + rtc_write(RTC_SECONDS, tm.tm_sec); + + mutex_unlock(&rtc_lock); + + return 0; + } + case RTC_VL_READ: + if (voltage_low) { + printk(KERN_ERR "%s: RTC Voltage Low - " + "reliable date/time information is no " + "longer guaranteed!\n", PCF8563_NAME); } - default: - return -ENOTTY; + if (copy_to_user((int *) arg, &voltage_low, sizeof(int))) + return -EFAULT; + return 0; + + case RTC_VL_CLR: + { + /* Clear the VL bit in the seconds register in case + * the time has not been set already (which would + * have cleared it). This does not really matter + * because of the cached voltage_low value but do it + * anyway for consistency. */ + + int ret = rtc_read(RTC_SECONDS); + + rtc_write(RTC_SECONDS, (ret & 0x7F)); + + /* Clear the cached value. */ + voltage_low = 0; + + return 0; + } + default: + return -ENOTTY; } return 0; } -static int __init -pcf8563_register(void) +static int __init pcf8563_register(void) { - pcf8563_init(); + if (pcf8563_init() < 0) { + printk(KERN_INFO "%s: Unable to initialize Real-Time Clock " + "Driver, %s\n", PCF8563_NAME, DRIVER_VERSION); + return -1; + } + if (register_chrdev(PCF8563_MAJOR, DEVICE_NAME, &pcf8563_fops) < 0) { printk(KERN_INFO "%s: Unable to get major number %d for RTC device.\n", PCF8563_NAME, PCF8563_MAJOR); return -1; } - printk(KERN_INFO "%s Real-Time Clock Driver, %s\n", PCF8563_NAME, DRIVER_VERSION); - return 0; + printk(KERN_INFO "%s Real-Time Clock Driver, %s\n", PCF8563_NAME, + DRIVER_VERSION); + + /* Check for low voltage, and warn about it. */ + if (voltage_low) { + printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time " + "information is no longer guaranteed!\n", PCF8563_NAME); + } + + return 0; } module_init(pcf8563_register); diff --git a/arch/cris/arch-v10/drivers/sync_serial.c b/arch/cris/arch-v10/drivers/sync_serial.c new file mode 100644 index 000000000000..069546e342c5 --- /dev/null +++ b/arch/cris/arch-v10/drivers/sync_serial.c @@ -0,0 +1,1441 @@ +/* + * Simple synchronous serial port driver for ETRAX 100LX. + * + * Synchronous serial ports are used for continuous streamed data like audio. + * The default setting for this driver is compatible with the STA 013 MP3 + * decoder. The driver can easily be tuned to fit other audio encoder/decoders + * and SPI + * + * Copyright (c) 2001-2008 Axis Communications AB + * + * Author: Mikael Starvik, Johan Adolfsson + * + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/major.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/poll.h> +#include <linux/init.h> +#include <linux/timer.h> +#include <asm/irq.h> +#include <asm/dma.h> +#include <asm/io.h> +#include <asm/arch/svinto.h> +#include <asm/uaccess.h> +#include <asm/system.h> +#include <asm/sync_serial.h> +#include <asm/arch/io_interface_mux.h> + +/* The receiver is a bit tricky beacuse of the continuous stream of data.*/ +/* */ +/* Three DMA descriptors are linked together. Each DMA descriptor is */ +/* responsible for port->bufchunk of a common buffer. */ +/* */ +/* +---------------------------------------------+ */ +/* | +----------+ +----------+ +----------+ | */ +/* +-> | Descr[0] |-->| Descr[1] |-->| Descr[2] |-+ */ +/* +----------+ +----------+ +----------+ */ +/* | | | */ +/* v v v */ +/* +-------------------------------------+ */ +/* | BUFFER | */ +/* +-------------------------------------+ */ +/* |<- data_avail ->| */ +/* readp writep */ +/* */ +/* If the application keeps up the pace readp will be right after writep.*/ +/* If the application can't keep the pace we have to throw away data. */ +/* The idea is that readp should be ready with the data pointed out by */ +/* Descr[i] when the DMA has filled in Descr[i+1]. */ +/* Otherwise we will discard */ +/* the rest of the data pointed out by Descr1 and set readp to the start */ +/* of Descr2 */ + +#define SYNC_SERIAL_MAJOR 125 + +/* IN_BUFFER_SIZE should be a multiple of 6 to make sure that 24 bit */ +/* words can be handled */ +#define IN_BUFFER_SIZE 12288 +#define IN_DESCR_SIZE 256 +#define NUM_IN_DESCR (IN_BUFFER_SIZE/IN_DESCR_SIZE) +#define OUT_BUFFER_SIZE 4096 + +#define DEFAULT_FRAME_RATE 0 +#define DEFAULT_WORD_RATE 7 + +/* NOTE: Enabling some debug will likely cause overrun or underrun, + * especially if manual mode is use. + */ +#define DEBUG(x) +#define DEBUGREAD(x) +#define DEBUGWRITE(x) +#define DEBUGPOLL(x) +#define DEBUGRXINT(x) +#define DEBUGTXINT(x) + +/* Define some macros to access ETRAX 100 registers */ +#define SETF(var, reg, field, val) \ + do { \ + var = (var & ~IO_MASK_(reg##_, field##_)) | \ + IO_FIELD_(reg##_, field##_, val); \ + } while (0) + +#define SETS(var, reg, field, val) \ + do { \ + var = (var & ~IO_MASK_(reg##_, field##_)) | \ + IO_STATE_(reg##_, field##_, _##val); \ + } while (0) + +struct sync_port { + /* Etrax registers and bits*/ + const volatile unsigned *const status; + volatile unsigned *const ctrl_data; + volatile unsigned *const output_dma_first; + volatile unsigned char *const output_dma_cmd; + volatile unsigned char *const output_dma_clr_irq; + volatile unsigned *const input_dma_first; + volatile unsigned char *const input_dma_cmd; + volatile unsigned *const input_dma_descr; + /* 8*4 */ + volatile unsigned char *const input_dma_clr_irq; + volatile unsigned *const data_out; + const volatile unsigned *const data_in; + char data_avail_bit; /* In R_IRQ_MASK1_RD/SET/CLR */ + char transmitter_ready_bit; /* In R_IRQ_MASK1_RD/SET/CLR */ + char input_dma_descr_bit; /* In R_IRQ_MASK2_RD */ + + char output_dma_bit; /* In R_IRQ_MASK2_RD */ + /* End of fields initialised in array */ + char started; /* 1 if port has been started */ + char port_nbr; /* Port 0 or 1 */ + char busy; /* 1 if port is busy */ + + char enabled; /* 1 if port is enabled */ + char use_dma; /* 1 if port uses dma */ + char tr_running; + + char init_irqs; + + /* Register shadow */ + unsigned int ctrl_data_shadow; + /* Remaining bytes for current transfer */ + volatile unsigned int out_count; + /* Current position in out_buffer */ + unsigned char *outp; + /* 16*4 */ + /* Next byte to be read by application */ + volatile unsigned char *volatile readp; + /* Next byte to be written by etrax */ + volatile unsigned char *volatile writep; + + unsigned int in_buffer_size; + unsigned int inbufchunk; + struct etrax_dma_descr out_descr __attribute__ ((aligned(32))); + struct etrax_dma_descr in_descr[NUM_IN_DESCR] __attribute__ ((aligned(32))); + unsigned char out_buffer[OUT_BUFFER_SIZE] __attribute__ ((aligned(32))); + unsigned char in_buffer[IN_BUFFER_SIZE]__attribute__ ((aligned(32))); + unsigned char flip[IN_BUFFER_SIZE] __attribute__ ((aligned(32))); + struct etrax_dma_descr *next_rx_desc; + struct etrax_dma_descr *prev_rx_desc; + int full; + + wait_queue_head_t out_wait_q; + wait_queue_head_t in_wait_q; +}; + + +static int etrax_sync_serial_init(void); +static void initialize_port(int portnbr); +static inline int sync_data_avail(struct sync_port *port); + +static int sync_serial_open(struct inode *inode, struct file *file); +static int sync_serial_release(struct inode *inode, struct file *file); +static unsigned int sync_serial_poll(struct file *filp, poll_table *wait); + +static int sync_serial_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg); +static ssize_t sync_serial_write(struct file *file, const char *buf, + size_t count, loff_t *ppos); +static ssize_t sync_serial_read(struct file *file, char *buf, + size_t count, loff_t *ppos); + +#if ((defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \ + defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)) || \ + (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) && \ + defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA))) +#define SYNC_SER_DMA +#endif + +static void send_word(struct sync_port *port); +static void start_dma(struct sync_port *port, const char *data, int count); +static void start_dma_in(struct sync_port *port); +#ifdef SYNC_SER_DMA +static irqreturn_t tr_interrupt(int irq, void *dev_id); +static irqreturn_t rx_interrupt(int irq, void *dev_id); +#endif +#if ((defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \ + !defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)) || \ + (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) && \ + !defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA))) +#define SYNC_SER_MANUAL +#endif +#ifdef SYNC_SER_MANUAL +static irqreturn_t manual_interrupt(int irq, void *dev_id); +#endif + +/* The ports */ +static struct sync_port ports[] = { + { + .status = R_SYNC_SERIAL1_STATUS, + .ctrl_data = R_SYNC_SERIAL1_CTRL, + .output_dma_first = R_DMA_CH8_FIRST, + .output_dma_cmd = R_DMA_CH8_CMD, + .output_dma_clr_irq = R_DMA_CH8_CLR_INTR, + .input_dma_first = R_DMA_CH9_FIRST, + .input_dma_cmd = R_DMA_CH9_CMD, + .input_dma_descr = R_DMA_CH9_DESCR, + .input_dma_clr_irq = R_DMA_CH9_CLR_INTR, + .data_out = R_SYNC_SERIAL1_TR_DATA, + .data_in = R_SYNC_SERIAL1_REC_DATA, + .data_avail_bit = IO_BITNR(R_IRQ_MASK1_RD, ser1_data), + .transmitter_ready_bit = IO_BITNR(R_IRQ_MASK1_RD, ser1_ready), + .input_dma_descr_bit = IO_BITNR(R_IRQ_MASK2_RD, dma9_descr), + .output_dma_bit = IO_BITNR(R_IRQ_MASK2_RD, dma8_eop), + .init_irqs = 1, +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA) + .use_dma = 1, +#else + .use_dma = 0, +#endif + }, + { + .status = R_SYNC_SERIAL3_STATUS, + .ctrl_data = R_SYNC_SERIAL3_CTRL, + .output_dma_first = R_DMA_CH4_FIRST, + .output_dma_cmd = R_DMA_CH4_CMD, + .output_dma_clr_irq = R_DMA_CH4_CLR_INTR, + .input_dma_first = R_DMA_CH5_FIRST, + .input_dma_cmd = R_DMA_CH5_CMD, + .input_dma_descr = R_DMA_CH5_DESCR, + .input_dma_clr_irq = R_DMA_CH5_CLR_INTR, + .data_out = R_SYNC_SERIAL3_TR_DATA, + .data_in = R_SYNC_SERIAL3_REC_DATA, + .data_avail_bit = IO_BITNR(R_IRQ_MASK1_RD, ser3_data), + .transmitter_ready_bit = IO_BITNR(R_IRQ_MASK1_RD, ser3_ready), + .input_dma_descr_bit = IO_BITNR(R_IRQ_MASK2_RD, dma5_descr), + .output_dma_bit = IO_BITNR(R_IRQ_MASK2_RD, dma4_eop), + .init_irqs = 1, +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA) + .use_dma = 1, +#else + .use_dma = 0, +#endif + } +}; + +/* Register shadows */ +static unsigned sync_serial_prescale_shadow; + +#define NUMBER_OF_PORTS 2 + +static struct file_operations sync_serial_fops = { + .owner = THIS_MODULE, + .write = sync_serial_write, + .read = sync_serial_read, + .poll = sync_serial_poll, + .ioctl = sync_serial_ioctl, + .open = sync_serial_open, + .release = sync_serial_release +}; + +static int __init etrax_sync_serial_init(void) +{ + ports[0].enabled = 0; + ports[1].enabled = 0; + +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) + if (cris_request_io_interface(if_sync_serial_1, "sync_ser1")) { + printk(KERN_CRIT "ETRAX100LX sync_serial: " + "Could not allocate IO group for port %d\n", 0); + return -EBUSY; + } +#endif +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) + if (cris_request_io_interface(if_sync_serial_3, "sync_ser3")) { +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) + cris_free_io_interface(if_sync_serial_1); +#endif + printk(KERN_CRIT "ETRAX100LX sync_serial: " + "Could not allocate IO group for port %d\n", 1); + return -EBUSY; + } +#endif + + if (register_chrdev(SYNC_SERIAL_MAJOR, "sync serial", + &sync_serial_fops) < 0) { +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) + cris_free_io_interface(if_sync_serial_3); +#endif +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) + cris_free_io_interface(if_sync_serial_1); +#endif + printk("unable to get major for synchronous serial port\n"); + return -EBUSY; + } + + /* Deselect synchronous serial ports while configuring. */ + SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, async); + SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, async); + *R_GEN_CONFIG_II = gen_config_ii_shadow; + + /* Initialize Ports */ +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) + ports[0].enabled = 1; + SETS(port_pb_i2c_shadow, R_PORT_PB_I2C, syncser1, ss1extra); + SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, sync); +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA) + ports[0].use_dma = 1; +#else + ports[0].use_dma = 0; +#endif + initialize_port(0); +#endif + +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) + ports[1].enabled = 1; + SETS(port_pb_i2c_shadow, R_PORT_PB_I2C, syncser3, ss3extra); + SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, sync); +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA) + ports[1].use_dma = 1; +#else + ports[1].use_dma = 0; +#endif + initialize_port(1); +#endif + + *R_PORT_PB_I2C = port_pb_i2c_shadow; /* Use PB4/PB7 */ + + /* Set up timing */ + *R_SYNC_SERIAL_PRESCALE = sync_serial_prescale_shadow = ( + IO_STATE(R_SYNC_SERIAL_PRESCALE, clk_sel_u1, codec) | + IO_STATE(R_SYNC_SERIAL_PRESCALE, word_stb_sel_u1, external) | + IO_STATE(R_SYNC_SERIAL_PRESCALE, clk_sel_u3, codec) | + IO_STATE(R_SYNC_SERIAL_PRESCALE, word_stb_sel_u3, external) | + IO_STATE(R_SYNC_SERIAL_PRESCALE, prescaler, div4) | + IO_FIELD(R_SYNC_SERIAL_PRESCALE, frame_rate, + DEFAULT_FRAME_RATE) | + IO_FIELD(R_SYNC_SERIAL_PRESCALE, word_rate, DEFAULT_WORD_RATE) | + IO_STATE(R_SYNC_SERIAL_PRESCALE, warp_mode, normal)); + + /* Select synchronous ports */ + *R_GEN_CONFIG_II = gen_config_ii_shadow; + + printk(KERN_INFO "ETRAX 100LX synchronous serial port driver\n"); + return 0; +} + +static void __init initialize_port(int portnbr) +{ + struct sync_port *port = &ports[portnbr]; + + DEBUG(printk(KERN_DEBUG "Init sync serial port %d\n", portnbr)); + + port->started = 0; + port->port_nbr = portnbr; + port->busy = 0; + port->tr_running = 0; + + port->out_count = 0; + port->outp = port->out_buffer; + + port->readp = port->flip; + port->writep = port->flip; + port->in_buffer_size = IN_BUFFER_SIZE; + port->inbufchunk = IN_DESCR_SIZE; + port->next_rx_desc = &port->in_descr[0]; + port->prev_rx_desc = &port->in_descr[NUM_IN_DESCR-1]; + port->prev_rx_desc->ctrl = d_eol; + + init_waitqueue_head(&port->out_wait_q); + init_waitqueue_head(&port->in_wait_q); + + port->ctrl_data_shadow = + IO_STATE(R_SYNC_SERIAL1_CTRL, tr_baud, c115k2Hz) | + IO_STATE(R_SYNC_SERIAL1_CTRL, mode, master_output) | + IO_STATE(R_SYNC_SERIAL1_CTRL, error, ignore) | + IO_STATE(R_SYNC_SERIAL1_CTRL, rec_enable, disable) | + IO_STATE(R_SYNC_SERIAL1_CTRL, f_synctype, normal) | + IO_STATE(R_SYNC_SERIAL1_CTRL, f_syncsize, word) | + IO_STATE(R_SYNC_SERIAL1_CTRL, f_sync, on) | + IO_STATE(R_SYNC_SERIAL1_CTRL, clk_mode, normal) | + IO_STATE(R_SYNC_SERIAL1_CTRL, clk_halt, stopped) | + IO_STATE(R_SYNC_SERIAL1_CTRL, bitorder, msb) | + IO_STATE(R_SYNC_SERIAL1_CTRL, tr_enable, disable) | + IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size8bit) | + IO_STATE(R_SYNC_SERIAL1_CTRL, buf_empty, lmt_8) | + IO_STATE(R_SYNC_SERIAL1_CTRL, buf_full, lmt_8) | + IO_STATE(R_SYNC_SERIAL1_CTRL, flow_ctrl, enabled) | + IO_STATE(R_SYNC_SERIAL1_CTRL, clk_polarity, neg) | + IO_STATE(R_SYNC_SERIAL1_CTRL, frame_polarity, normal)| + IO_STATE(R_SYNC_SERIAL1_CTRL, status_polarity, inverted)| + IO_STATE(R_SYNC_SERIAL1_CTRL, clk_driver, normal) | + IO_STATE(R_SYNC_SERIAL1_CTRL, frame_driver, normal) | + IO_STATE(R_SYNC_SERIAL1_CTRL, status_driver, normal)| + IO_STATE(R_SYNC_SERIAL1_CTRL, def_out0, high); + + if (port->use_dma) + port->ctrl_data_shadow |= IO_STATE(R_SYNC_SERIAL1_CTRL, + dma_enable, on); + else + port->ctrl_data_shadow |= IO_STATE(R_SYNC_SERIAL1_CTRL, + dma_enable, off); + + *port->ctrl_data = port->ctrl_data_shadow; +} + +static inline int sync_data_avail(struct sync_port *port) +{ + int avail; + unsigned char *start; + unsigned char *end; + + start = (unsigned char *)port->readp; /* cast away volatile */ + end = (unsigned char *)port->writep; /* cast away volatile */ + /* 0123456789 0123456789 + * ----- - ----- + * ^rp ^wp ^wp ^rp + */ + if (end >= start) + avail = end - start; + else + avail = port->in_buffer_size - (start - end); + return avail; +} + +static inline int sync_data_avail_to_end(struct sync_port *port) +{ + int avail; + unsigned char *start; + unsigned char *end; + + start = (unsigned char *)port->readp; /* cast away volatile */ + end = (unsigned char *)port->writep; /* cast away volatile */ + /* 0123456789 0123456789 + * ----- ----- + * ^rp ^wp ^wp ^rp + */ + + if (end >= start) + avail = end - start; + else + avail = port->flip + port->in_buffer_size - start; + return avail; +} + + +static int sync_serial_open(struct inode *inode, struct file *file) +{ + int dev = MINOR(inode->i_rdev); + struct sync_port *port; + int mode; + + DEBUG(printk(KERN_DEBUG "Open sync serial port %d\n", dev)); + + if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) { + DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev)); + return -ENODEV; + } + port = &ports[dev]; + /* Allow open this device twice (assuming one reader and one writer) */ + if (port->busy == 2) { + DEBUG(printk(KERN_DEBUG "Device is busy.. \n")); + return -EBUSY; + } + if (port->init_irqs) { + if (port->use_dma) { + if (port == &ports[0]) { +#ifdef SYNC_SER_DMA + if (request_irq(24, tr_interrupt, 0, + "synchronous serial 1 dma tr", + &ports[0])) { + printk(KERN_CRIT "Can't alloc " + "sync serial port 1 IRQ"); + return -EBUSY; + } else if (request_irq(25, rx_interrupt, 0, + "synchronous serial 1 dma rx", + &ports[0])) { + free_irq(24, &port[0]); + printk(KERN_CRIT "Can't alloc " + "sync serial port 1 IRQ"); + return -EBUSY; + } else if (cris_request_dma(8, + "synchronous serial 1 dma tr", + DMA_VERBOSE_ON_ERROR, + dma_ser1)) { + free_irq(24, &port[0]); + free_irq(25, &port[0]); + printk(KERN_CRIT "Can't alloc " + "sync serial port 1 " + "TX DMA channel"); + return -EBUSY; + } else if (cris_request_dma(9, + "synchronous serial 1 dma rec", + DMA_VERBOSE_ON_ERROR, + dma_ser1)) { + cris_free_dma(8, NULL); + free_irq(24, &port[0]); + free_irq(25, &port[0]); + printk(KERN_CRIT "Can't alloc " + "sync serial port 1 " + "RX DMA channel"); + return -EBUSY; + } +#endif + RESET_DMA(8); WAIT_DMA(8); + RESET_DMA(9); WAIT_DMA(9); + *R_DMA_CH8_CLR_INTR = + IO_STATE(R_DMA_CH8_CLR_INTR, clr_eop, + do) | + IO_STATE(R_DMA_CH8_CLR_INTR, clr_descr, + do); + *R_DMA_CH9_CLR_INTR = + IO_STATE(R_DMA_CH9_CLR_INTR, clr_eop, + do) | + IO_STATE(R_DMA_CH9_CLR_INTR, clr_descr, + do); + *R_IRQ_MASK2_SET = + IO_STATE(R_IRQ_MASK2_SET, dma8_eop, + set) | + IO_STATE(R_IRQ_MASK2_SET, dma9_descr, + set); + } else if (port == &ports[1]) { +#ifdef SYNC_SER_DMA + if (request_irq(20, tr_interrupt, 0, + "synchronous serial 3 dma tr", + &ports[1])) { + printk(KERN_CRIT "Can't alloc " + "sync serial port 3 IRQ"); + return -EBUSY; + } else if (request_irq(21, rx_interrupt, 0, + "synchronous serial 3 dma rx", + &ports[1])) { + free_irq(20, &ports[1]); + printk(KERN_CRIT "Can't alloc " + "sync serial port 3 IRQ"); + return -EBUSY; + } else if (cris_request_dma(4, + "synchronous serial 3 dma tr", + DMA_VERBOSE_ON_ERROR, + dma_ser3)) { + free_irq(21, &ports[1]); + free_irq(20, &ports[1]); + printk(KERN_CRIT "Can't alloc " + "sync serial port 3 " + "TX DMA channel"); + return -EBUSY; + } else if (cris_request_dma(5, + "synchronous serial 3 dma rec", + DMA_VERBOSE_ON_ERROR, + dma_ser3)) { + cris_free_dma(4, NULL); + free_irq(21, &ports[1]); + free_irq(20, &ports[1]); + printk(KERN_CRIT "Can't alloc " + "sync serial port 3 " + "RX DMA channel"); + return -EBUSY; + } +#endif + RESET_DMA(4); WAIT_DMA(4); + RESET_DMA(5); WAIT_DMA(5); + *R_DMA_CH4_CLR_INTR = + IO_STATE(R_DMA_CH4_CLR_INTR, clr_eop, + do) | + IO_STATE(R_DMA_CH4_CLR_INTR, clr_descr, + do); + *R_DMA_CH5_CLR_INTR = + IO_STATE(R_DMA_CH5_CLR_INTR, clr_eop, + do) | + IO_STATE(R_DMA_CH5_CLR_INTR, clr_descr, + do); + *R_IRQ_MASK2_SET = + IO_STATE(R_IRQ_MASK2_SET, dma4_eop, + set) | + IO_STATE(R_IRQ_MASK2_SET, dma5_descr, + set); + } + start_dma_in(port); + port->init_irqs = 0; + } else { /* !port->use_dma */ +#ifdef SYNC_SER_MANUAL + if (port == &ports[0]) { + if (request_irq(8, + manual_interrupt, + IRQF_SHARED | IRQF_DISABLED, + "synchronous serial manual irq", + &ports[0])) { + printk(KERN_CRIT "Can't alloc " + "sync serial manual irq"); + return -EBUSY; + } + } else if (port == &ports[1]) { + if (request_irq(8, + manual_interrupt, + IRQF_SHARED | IRQF_DISABLED, + "synchronous serial manual irq", + &ports[1])) { + printk(KERN_CRIT "Can't alloc " + "sync serial manual irq"); + return -EBUSY; + } + } + port->init_irqs = 0; +#else + panic("sync_serial: Manual mode not supported.\n"); +#endif /* SYNC_SER_MANUAL */ + } + } /* port->init_irqs */ + + port->busy++; + /* Start port if we use it as input */ + mode = IO_EXTRACT(R_SYNC_SERIAL1_CTRL, mode, port->ctrl_data_shadow); + if (mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, master_input) || + mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, slave_input) || + mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, master_bidir) || + mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, slave_bidir)) { + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_halt, + running); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, tr_enable, + enable); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, rec_enable, + enable); + port->started = 1; + *port->ctrl_data = port->ctrl_data_shadow; + if (!port->use_dma) + *R_IRQ_MASK1_SET = 1 << port->data_avail_bit; + DEBUG(printk(KERN_DEBUG "sser%d rec started\n", dev)); + } + return 0; +} + +static int sync_serial_release(struct inode *inode, struct file *file) +{ + int dev = MINOR(inode->i_rdev); + struct sync_port *port; + + if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) { + DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev)); + return -ENODEV; + } + port = &ports[dev]; + if (port->busy) + port->busy--; + if (!port->busy) + *R_IRQ_MASK1_CLR = ((1 << port->data_avail_bit) | + (1 << port->transmitter_ready_bit)); + + return 0; +} + + + +static unsigned int sync_serial_poll(struct file *file, poll_table *wait) +{ + int dev = MINOR(file->f_dentry->d_inode->i_rdev); + unsigned int mask = 0; + struct sync_port *port; + DEBUGPOLL(static unsigned int prev_mask = 0); + + port = &ports[dev]; + poll_wait(file, &port->out_wait_q, wait); + poll_wait(file, &port->in_wait_q, wait); + /* Some room to write */ + if (port->out_count < OUT_BUFFER_SIZE) + mask |= POLLOUT | POLLWRNORM; + /* At least an inbufchunk of data */ + if (sync_data_avail(port) >= port->inbufchunk) + mask |= POLLIN | POLLRDNORM; + + DEBUGPOLL(if (mask != prev_mask) + printk(KERN_DEBUG "sync_serial_poll: mask 0x%08X %s %s\n", + mask, + mask & POLLOUT ? "POLLOUT" : "", + mask & POLLIN ? "POLLIN" : ""); + prev_mask = mask; + ); + return mask; +} + +static int sync_serial_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + int return_val = 0; + unsigned long flags; + + int dev = MINOR(file->f_dentry->d_inode->i_rdev); + struct sync_port *port; + + if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) { + DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev)); + return -1; + } + port = &ports[dev]; + + local_irq_save(flags); + /* Disable port while changing config */ + if (dev) { + if (port->use_dma) { + RESET_DMA(4); WAIT_DMA(4); + port->tr_running = 0; + port->out_count = 0; + port->outp = port->out_buffer; + *R_DMA_CH4_CLR_INTR = + IO_STATE(R_DMA_CH4_CLR_INTR, clr_eop, do) | + IO_STATE(R_DMA_CH4_CLR_INTR, clr_descr, do); + } + SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, async); + } else { + if (port->use_dma) { + RESET_DMA(8); WAIT_DMA(8); + port->tr_running = 0; + port->out_count = 0; + port->outp = port->out_buffer; + *R_DMA_CH8_CLR_INTR = + IO_STATE(R_DMA_CH8_CLR_INTR, clr_eop, do) | + IO_STATE(R_DMA_CH8_CLR_INTR, clr_descr, do); + } + SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, async); + } + *R_GEN_CONFIG_II = gen_config_ii_shadow; + local_irq_restore(flags); + + switch (cmd) { + case SSP_SPEED: + if (GET_SPEED(arg) == CODEC) { + if (dev) + SETS(sync_serial_prescale_shadow, + R_SYNC_SERIAL_PRESCALE, clk_sel_u3, + codec); + else + SETS(sync_serial_prescale_shadow, + R_SYNC_SERIAL_PRESCALE, clk_sel_u1, + codec); + + SETF(sync_serial_prescale_shadow, + R_SYNC_SERIAL_PRESCALE, prescaler, + GET_FREQ(arg)); + SETF(sync_serial_prescale_shadow, + R_SYNC_SERIAL_PRESCALE, frame_rate, + GET_FRAME_RATE(arg)); + SETF(sync_serial_prescale_shadow, + R_SYNC_SERIAL_PRESCALE, word_rate, + GET_WORD_RATE(arg)); + } else { + SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + tr_baud, GET_SPEED(arg)); + if (dev) + SETS(sync_serial_prescale_shadow, + R_SYNC_SERIAL_PRESCALE, clk_sel_u3, + baudrate); + else + SETS(sync_serial_prescale_shadow, + R_SYNC_SERIAL_PRESCALE, clk_sel_u1, + baudrate); + } + break; + case SSP_MODE: + if (arg > 5) + return -EINVAL; + if (arg == MASTER_OUTPUT || arg == SLAVE_OUTPUT) + *R_IRQ_MASK1_CLR = 1 << port->data_avail_bit; + else if (!port->use_dma) + *R_IRQ_MASK1_SET = 1 << port->data_avail_bit; + SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, mode, arg); + break; + case SSP_FRAME_SYNC: + if (arg & NORMAL_SYNC) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + f_synctype, normal); + else if (arg & EARLY_SYNC) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + f_synctype, early); + + if (arg & BIT_SYNC) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + f_syncsize, bit); + else if (arg & WORD_SYNC) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + f_syncsize, word); + else if (arg & EXTENDED_SYNC) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + f_syncsize, extended); + + if (arg & SYNC_ON) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + f_sync, on); + else if (arg & SYNC_OFF) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + f_sync, off); + + if (arg & WORD_SIZE_8) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + wordsize, size8bit); + else if (arg & WORD_SIZE_12) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + wordsize, size12bit); + else if (arg & WORD_SIZE_16) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + wordsize, size16bit); + else if (arg & WORD_SIZE_24) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + wordsize, size24bit); + else if (arg & WORD_SIZE_32) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + wordsize, size32bit); + + if (arg & BIT_ORDER_MSB) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + bitorder, msb); + else if (arg & BIT_ORDER_LSB) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + bitorder, lsb); + + if (arg & FLOW_CONTROL_ENABLE) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + flow_ctrl, enabled); + else if (arg & FLOW_CONTROL_DISABLE) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + flow_ctrl, disabled); + + if (arg & CLOCK_NOT_GATED) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + clk_mode, normal); + else if (arg & CLOCK_GATED) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + clk_mode, gated); + + break; + case SSP_IPOLARITY: + /* NOTE!! negedge is considered NORMAL */ + if (arg & CLOCK_NORMAL) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + clk_polarity, neg); + else if (arg & CLOCK_INVERT) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + clk_polarity, pos); + + if (arg & FRAME_NORMAL) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + frame_polarity, normal); + else if (arg & FRAME_INVERT) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + frame_polarity, inverted); + + if (arg & STATUS_NORMAL) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + status_polarity, normal); + else if (arg & STATUS_INVERT) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + status_polarity, inverted); + break; + case SSP_OPOLARITY: + if (arg & CLOCK_NORMAL) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + clk_driver, normal); + else if (arg & CLOCK_INVERT) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + clk_driver, inverted); + + if (arg & FRAME_NORMAL) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + frame_driver, normal); + else if (arg & FRAME_INVERT) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + frame_driver, inverted); + + if (arg & STATUS_NORMAL) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + status_driver, normal); + else if (arg & STATUS_INVERT) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + status_driver, inverted); + break; + case SSP_SPI: + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, flow_ctrl, + disabled); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, bitorder, + msb); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, wordsize, + size8bit); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_sync, on); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_syncsize, + word); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_synctype, + normal); + if (arg & SPI_SLAVE) { + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + frame_polarity, inverted); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + clk_polarity, neg); + SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + mode, SLAVE_INPUT); + } else { + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + frame_driver, inverted); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + clk_driver, inverted); + SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + mode, MASTER_OUTPUT); + } + break; + case SSP_INBUFCHUNK: +#if 0 + if (arg > port->in_buffer_size/NUM_IN_DESCR) + return -EINVAL; + port->inbufchunk = arg; + /* Make sure in_buffer_size is a multiple of inbufchunk */ + port->in_buffer_size = + (port->in_buffer_size/port->inbufchunk) * + port->inbufchunk; + DEBUG(printk(KERN_DEBUG "inbufchunk %i in_buffer_size: %i\n", + port->inbufchunk, port->in_buffer_size)); + if (port->use_dma) { + if (port->port_nbr == 0) { + RESET_DMA(9); + WAIT_DMA(9); + } else { + RESET_DMA(5); + WAIT_DMA(5); + } + start_dma_in(port); + } +#endif + break; + default: + return_val = -1; + } + /* Make sure we write the config without interruption */ + local_irq_save(flags); + /* Set config and enable port */ + *port->ctrl_data = port->ctrl_data_shadow; + nop(); nop(); nop(); nop(); + *R_SYNC_SERIAL_PRESCALE = sync_serial_prescale_shadow; + nop(); nop(); nop(); nop(); + if (dev) + SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, sync); + else + SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, sync); + + *R_GEN_CONFIG_II = gen_config_ii_shadow; + /* Reset DMA. At readout from serial port the data could be shifted + * one byte if not resetting DMA. + */ + if (port->use_dma) { + if (port->port_nbr == 0) { + RESET_DMA(9); + WAIT_DMA(9); + } else { + RESET_DMA(5); + WAIT_DMA(5); + } + start_dma_in(port); + } + local_irq_restore(flags); + return return_val; +} + + +static ssize_t sync_serial_write(struct file *file, const char *buf, + size_t count, loff_t *ppos) +{ + int dev = MINOR(file->f_dentry->d_inode->i_rdev); + DECLARE_WAITQUEUE(wait, current); + struct sync_port *port; + unsigned long flags; + unsigned long c, c1; + unsigned long free_outp; + unsigned long outp; + unsigned long out_buffer; + + if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) { + DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev)); + return -ENODEV; + } + port = &ports[dev]; + + DEBUGWRITE(printk(KERN_DEBUG "W d%d c %lu (%d/%d)\n", + port->port_nbr, count, port->out_count, OUT_BUFFER_SIZE)); + /* Space to end of buffer */ + /* + * out_buffer <c1>012345<- c ->OUT_BUFFER_SIZE + * outp^ +out_count + * ^free_outp + * out_buffer 45<- c ->0123OUT_BUFFER_SIZE + * +out_count outp^ + * free_outp + * + */ + + /* Read variables that may be updated by interrupts */ + local_irq_save(flags); + if (count > OUT_BUFFER_SIZE - port->out_count) + count = OUT_BUFFER_SIZE - port->out_count; + + outp = (unsigned long)port->outp; + free_outp = outp + port->out_count; + local_irq_restore(flags); + out_buffer = (unsigned long)port->out_buffer; + + /* Find out where and how much to write */ + if (free_outp >= out_buffer + OUT_BUFFER_SIZE) + free_outp -= OUT_BUFFER_SIZE; + if (free_outp >= outp) + c = out_buffer + OUT_BUFFER_SIZE - free_outp; + else + c = outp - free_outp; + if (c > count) + c = count; + + DEBUGWRITE(printk(KERN_DEBUG "w op %08lX fop %08lX c %lu\n", + outp, free_outp, c)); + if (copy_from_user((void *)free_outp, buf, c)) + return -EFAULT; + + if (c != count) { + buf += c; + c1 = count - c; + DEBUGWRITE(printk(KERN_DEBUG "w2 fi %lu c %lu c1 %lu\n", + free_outp-out_buffer, c, c1)); + if (copy_from_user((void *)out_buffer, buf, c1)) + return -EFAULT; + } + local_irq_save(flags); + port->out_count += count; + local_irq_restore(flags); + + /* Make sure transmitter/receiver is running */ + if (!port->started) { + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_halt, + running); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, tr_enable, + enable); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, rec_enable, + enable); + port->started = 1; + } + + *port->ctrl_data = port->ctrl_data_shadow; + + if (file->f_flags & O_NONBLOCK) { + local_irq_save(flags); + if (!port->tr_running) { + if (!port->use_dma) { + /* Start sender by writing data */ + send_word(port); + /* and enable transmitter ready IRQ */ + *R_IRQ_MASK1_SET = 1 << + port->transmitter_ready_bit; + } else + start_dma(port, + (unsigned char *volatile)port->outp, c); + } + local_irq_restore(flags); + DEBUGWRITE(printk(KERN_DEBUG "w d%d c %lu NB\n", + port->port_nbr, count)); + return count; + } + + /* Sleep until all sent */ + add_wait_queue(&port->out_wait_q, &wait); + set_current_state(TASK_INTERRUPTIBLE); + local_irq_save(flags); + if (!port->tr_running) { + if (!port->use_dma) { + /* Start sender by writing data */ + send_word(port); + /* and enable transmitter ready IRQ */ + *R_IRQ_MASK1_SET = 1 << port->transmitter_ready_bit; + } else + start_dma(port, port->outp, c); + } + local_irq_restore(flags); + schedule(); + set_current_state(TASK_RUNNING); + remove_wait_queue(&port->out_wait_q, &wait); + if (signal_pending(current)) + return -EINTR; + + DEBUGWRITE(printk(KERN_DEBUG "w d%d c %lu\n", port->port_nbr, count)); + return count; +} + +static ssize_t sync_serial_read(struct file *file, char *buf, + size_t count, loff_t *ppos) +{ + int dev = MINOR(file->f_dentry->d_inode->i_rdev); + int avail; + struct sync_port *port; + unsigned char *start; + unsigned char *end; + unsigned long flags; + + if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) { + DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev)); + return -ENODEV; + } + port = &ports[dev]; + + DEBUGREAD(printk(KERN_DEBUG "R%d c %d ri %lu wi %lu /%lu\n", + dev, count, port->readp - port->flip, + port->writep - port->flip, port->in_buffer_size)); + + if (!port->started) { + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_halt, + running); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, tr_enable, + enable); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, rec_enable, + enable); + port->started = 1; + } + *port->ctrl_data = port->ctrl_data_shadow; + + /* Calculate number of available bytes */ + /* Save pointers to avoid that they are modified by interrupt */ + local_irq_save(flags); + start = (unsigned char *)port->readp; /* cast away volatile */ + end = (unsigned char *)port->writep; /* cast away volatile */ + local_irq_restore(flags); + while (start == end && !port->full) { + /* No data */ + if (file->f_flags & O_NONBLOCK) + return -EAGAIN; + + interruptible_sleep_on(&port->in_wait_q); + if (signal_pending(current)) + return -EINTR; + + local_irq_save(flags); + start = (unsigned char *)port->readp; /* cast away volatile */ + end = (unsigned char *)port->writep; /* cast away volatile */ + local_irq_restore(flags); + } + + /* Lazy read, never return wrapped data. */ + if (port->full) + avail = port->in_buffer_size; + else if (end > start) + avail = end - start; + else + avail = port->flip + port->in_buffer_size - start; + + count = count > avail ? avail : count; + if (copy_to_user(buf, start, count)) + return -EFAULT; + /* Disable interrupts while updating readp */ + local_irq_save(flags); + port->readp += count; + if (port->readp >= port->flip + port->in_buffer_size) /* Wrap? */ + port->readp = port->flip; + port->full = 0; + local_irq_restore(flags); + DEBUGREAD(printk(KERN_DEBUG "r %d\n", count)); + return count; +} + +static void send_word(struct sync_port *port) +{ + switch (IO_EXTRACT(R_SYNC_SERIAL1_CTRL, wordsize, + port->ctrl_data_shadow)) { + case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size8bit): + port->out_count--; + *port->data_out = *port->outp++; + if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) + port->outp = port->out_buffer; + break; + case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size12bit): + { + int data = (*port->outp++) << 8; + data |= *port->outp++; + port->out_count -= 2; + *port->data_out = data; + if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) + port->outp = port->out_buffer; + break; + } + case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size16bit): + port->out_count -= 2; + *port->data_out = *(unsigned short *)port->outp; + port->outp += 2; + if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) + port->outp = port->out_buffer; + break; + case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size24bit): + port->out_count -= 3; + *port->data_out = *(unsigned int *)port->outp; + port->outp += 3; + if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) + port->outp = port->out_buffer; + break; + case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size32bit): + port->out_count -= 4; + *port->data_out = *(unsigned int *)port->outp; + port->outp += 4; + if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) + port->outp = port->out_buffer; + break; + } +} + + +static void start_dma(struct sync_port *port, const char *data, int count) +{ + port->tr_running = 1; + port->out_descr.hw_len = 0; + port->out_descr.next = 0; + port->out_descr.ctrl = d_eol | d_eop; /* No d_wait to avoid glitches */ + port->out_descr.sw_len = count; + port->out_descr.buf = virt_to_phys(data); + port->out_descr.status = 0; + + *port->output_dma_first = virt_to_phys(&port->out_descr); + *port->output_dma_cmd = IO_STATE(R_DMA_CH0_CMD, cmd, start); + DEBUGTXINT(printk(KERN_DEBUG "dma %08lX c %d\n", + (unsigned long)data, count)); +} + +static void start_dma_in(struct sync_port *port) +{ + int i; + unsigned long buf; + port->writep = port->flip; + + if (port->writep > port->flip + port->in_buffer_size) { + panic("Offset too large in sync serial driver\n"); + return; + } + buf = virt_to_phys(port->in_buffer); + for (i = 0; i < NUM_IN_DESCR; i++) { + port->in_descr[i].sw_len = port->inbufchunk; + port->in_descr[i].ctrl = d_int; + port->in_descr[i].next = virt_to_phys(&port->in_descr[i+1]); + port->in_descr[i].buf = buf; + port->in_descr[i].hw_len = 0; + port->in_descr[i].status = 0; + port->in_descr[i].fifo_len = 0; + buf += port->inbufchunk; + prepare_rx_descriptor(&port->in_descr[i]); + } + /* Link the last descriptor to the first */ + port->in_descr[i-1].next = virt_to_phys(&port->in_descr[0]); + port->in_descr[i-1].ctrl |= d_eol; + port->next_rx_desc = &port->in_descr[0]; + port->prev_rx_desc = &port->in_descr[NUM_IN_DESCR - 1]; + *port->input_dma_first = virt_to_phys(port->next_rx_desc); + *port->input_dma_cmd = IO_STATE(R_DMA_CH0_CMD, cmd, start); +} + +#ifdef SYNC_SER_DMA +static irqreturn_t tr_interrupt(int irq, void *dev_id) +{ + unsigned long ireg = *R_IRQ_MASK2_RD; + struct etrax_dma_descr *descr; + unsigned int sentl; + int handled = 0; + int i; + + for (i = 0; i < NUMBER_OF_PORTS; i++) { + struct sync_port *port = &ports[i]; + if (!port->enabled || !port->use_dma) + continue; + + /* IRQ active for the port? */ + if (!(ireg & (1 << port->output_dma_bit))) + continue; + + handled = 1; + + /* Clear IRQ */ + *port->output_dma_clr_irq = + IO_STATE(R_DMA_CH0_CLR_INTR, clr_eop, do) | + IO_STATE(R_DMA_CH0_CLR_INTR, clr_descr, do); + + descr = &port->out_descr; + if (!(descr->status & d_stop)) + sentl = descr->sw_len; + else + /* Otherwise find amount of data sent here */ + sentl = descr->hw_len; + + port->out_count -= sentl; + port->outp += sentl; + if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) + port->outp = port->out_buffer; + if (port->out_count) { + int c = port->out_buffer + OUT_BUFFER_SIZE - port->outp; + if (c > port->out_count) + c = port->out_count; + DEBUGTXINT(printk(KERN_DEBUG + "tx_int DMAWRITE %i %i\n", sentl, c)); + start_dma(port, port->outp, c); + } else { + DEBUGTXINT(printk(KERN_DEBUG + "tx_int DMA stop %i\n", sentl)); + port->tr_running = 0; + } + /* wake up the waiting process */ + wake_up_interruptible(&port->out_wait_q); + } + return IRQ_RETVAL(handled); +} /* tr_interrupt */ + +static irqreturn_t rx_interrupt(int irq, void *dev_id) +{ + unsigned long ireg = *R_IRQ_MASK2_RD; + int i; + int handled = 0; + + for (i = 0; i < NUMBER_OF_PORTS; i++) { + struct sync_port *port = &ports[i]; + + if (!port->enabled || !port->use_dma) + continue; + + if (!(ireg & (1 << port->input_dma_descr_bit))) + continue; + + /* Descriptor interrupt */ + handled = 1; + while (*port->input_dma_descr != + virt_to_phys(port->next_rx_desc)) { + if (port->writep + port->inbufchunk > port->flip + + port->in_buffer_size) { + int first_size = port->flip + + port->in_buffer_size - port->writep; + memcpy(port->writep, + phys_to_virt(port->next_rx_desc->buf), + first_size); + memcpy(port->flip, + phys_to_virt(port->next_rx_desc->buf + + first_size), + port->inbufchunk - first_size); + port->writep = port->flip + + port->inbufchunk - first_size; + } else { + memcpy(port->writep, + phys_to_virt(port->next_rx_desc->buf), + port->inbufchunk); + port->writep += port->inbufchunk; + if (port->writep >= port->flip + + port->in_buffer_size) + port->writep = port->flip; + } + if (port->writep == port->readp) + port->full = 1; + prepare_rx_descriptor(port->next_rx_desc); + port->next_rx_desc->ctrl |= d_eol; + port->prev_rx_desc->ctrl &= ~d_eol; + port->prev_rx_desc = phys_to_virt((unsigned) + port->next_rx_desc); + port->next_rx_desc = phys_to_virt((unsigned) + port->next_rx_desc->next); + /* Wake up the waiting process */ + wake_up_interruptible(&port->in_wait_q); + *port->input_dma_cmd = IO_STATE(R_DMA_CH1_CMD, + cmd, restart); + /* DMA has reached end of descriptor */ + *port->input_dma_clr_irq = IO_STATE(R_DMA_CH0_CLR_INTR, + clr_descr, do); + } + } + return IRQ_RETVAL(handled); +} /* rx_interrupt */ +#endif /* SYNC_SER_DMA */ + +#ifdef SYNC_SER_MANUAL +static irqreturn_t manual_interrupt(int irq, void *dev_id) +{ + int i; + int handled = 0; + + for (i = 0; i < NUMBER_OF_PORTS; i++) { + struct sync_port *port = &ports[i]; + + if (!port->enabled || port->use_dma) + continue; + + /* Data received? */ + if (*R_IRQ_MASK1_RD & (1 << port->data_avail_bit)) { + handled = 1; + /* Read data */ + switch (port->ctrl_data_shadow & + IO_MASK(R_SYNC_SERIAL1_CTRL, wordsize)) { + case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size8bit): + *port->writep++ = + *(volatile char *)port->data_in; + break; + case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size12bit): + { + int data = *(unsigned short *)port->data_in; + *port->writep = (data & 0x0ff0) >> 4; + *(port->writep + 1) = data & 0x0f; + port->writep += 2; + break; + } + case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size16bit): + *(unsigned short *)port->writep = + *(volatile unsigned short *)port->data_in; + port->writep += 2; + break; + case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size24bit): + *(unsigned int *)port->writep = *port->data_in; + port->writep += 3; + break; + case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size32bit): + *(unsigned int *)port->writep = *port->data_in; + port->writep += 4; + break; + } + + /* Wrap? */ + if (port->writep >= port->flip + port->in_buffer_size) + port->writep = port->flip; + if (port->writep == port->readp) { + /* Receive buffer overrun, discard oldest */ + port->readp++; + /* Wrap? */ + if (port->readp >= port->flip + + port->in_buffer_size) + port->readp = port->flip; + } + if (sync_data_avail(port) >= port->inbufchunk) { + /* Wake up application */ + wake_up_interruptible(&port->in_wait_q); + } + } + + /* Transmitter ready? */ + if (*R_IRQ_MASK1_RD & (1 << port->transmitter_ready_bit)) { + if (port->out_count > 0) { + /* More data to send */ + send_word(port); + } else { + /* Transmission finished */ + /* Turn off IRQ */ + *R_IRQ_MASK1_CLR = 1 << + port->transmitter_ready_bit; + /* Wake up application */ + wake_up_interruptible(&port->out_wait_q); + } + } + } + return IRQ_RETVAL(handled); +} +#endif + +module_init(etrax_sync_serial_init); diff --git a/arch/cris/arch-v10/kernel/debugport.c b/arch/cris/arch-v10/kernel/debugport.c index 93679a48c791..04d5eee2c90c 100644 --- a/arch/cris/arch-v10/kernel/debugport.c +++ b/arch/cris/arch-v10/kernel/debugport.c @@ -1,6 +1,6 @@ /* Serialport functions for debugging * - * Copyright (c) 2000 Axis Communications AB + * Copyright (c) 2000-2007 Axis Communications AB * * Authors: Bjorn Wesen * @@ -11,96 +11,6 @@ * enableDebugIRQ() * init_etrax_debug() * - * $Log: debugport.c,v $ - * Revision 1.27 2005/06/10 10:34:14 starvik - * Real console support - * - * Revision 1.26 2005/06/07 07:06:07 starvik - * Added LF->CR translation to make ETRAX customers happy. - * - * Revision 1.25 2005/03/08 08:56:47 mikaelam - * Do only set index as port->index if port is defined, otherwise use the index from the command line - * - * Revision 1.24 2005/01/19 10:26:33 mikaelam - * Return the cris serial driver in console device driver callback function - * - * Revision 1.23 2005/01/14 10:12:17 starvik - * KGDB on separate port. - * Console fixes from 2.4. - * - * Revision 1.22 2005/01/11 16:06:13 starvik - * typo - * - * Revision 1.21 2005/01/11 13:49:14 starvik - * Added raw_printk to be used where we don't trust the console. - * - * Revision 1.20 2004/12/27 11:18:32 starvik - * Merge of Linux 2.6.10 (not functional yet). - * - * Revision 1.19 2004/10/21 07:26:16 starvik - * Made it possible to specify console settings on kernel command line. - * - * Revision 1.18 2004/10/19 13:07:37 starvik - * Merge of Linux 2.6.9 - * - * Revision 1.17 2004/09/29 10:33:46 starvik - * Resolved a dealock when printing debug from kernel. - * - * Revision 1.16 2004/08/24 06:12:19 starvik - * Whitespace cleanup - * - * Revision 1.15 2004/08/16 12:37:19 starvik - * Merge of Linux 2.6.8 - * - * Revision 1.14 2004/05/17 13:11:29 starvik - * Disable DMA until real serial driver is up - * - * Revision 1.13 2004/05/14 07:58:01 starvik - * Merge of changes from 2.4 - * - * Revision 1.12 2003/09/11 07:29:49 starvik - * Merge of Linux 2.6.0-test5 - * - * Revision 1.11 2003/07/07 09:53:36 starvik - * Revert all the 2.5.74 merge changes to make the console work again - * - * Revision 1.9 2003/02/17 17:07:23 starvik - * Solved the problem with corrupted debug output (from Linux 2.4) - * * Wait until DMA, FIFO and pipe is empty before and after transmissions - * * Buffer data until a FIFO flush can be triggered. - * - * Revision 1.8 2003/01/22 06:48:36 starvik - * Fixed warnings issued by GCC 3.2.1 - * - * Revision 1.7 2002/12/12 08:26:32 starvik - * Don't use C-comments inside CVS comments - * - * Revision 1.6 2002/12/11 15:42:02 starvik - * Extracted v10 (ETRAX 100LX) specific stuff from arch/cris/kernel/ - * - * Revision 1.5 2002/11/20 06:58:03 starvik - * Compiles with kgdb - * - * Revision 1.4 2002/11/19 14:35:24 starvik - * Changes from linux 2.4 - * Changed struct initializer syntax to the currently preferred notation - * - * Revision 1.3 2002/11/06 09:47:03 starvik - * Modified for new interrupt macros - * - * Revision 1.2 2002/01/21 15:21:50 bjornw - * Update for kdev_t changes - * - * Revision 1.6 2001/04/17 13:58:39 orjanf - * * Renamed CONFIG_KGDB to CONFIG_ETRAX_KGDB. - * - * Revision 1.5 2001/03/26 14:22:05 bjornw - * Namechange of some config options - * - * Revision 1.4 2000/10/06 12:37:26 bjornw - * Use physical addresses when talking to DMA - * - * */ #include <linux/console.h> @@ -112,6 +22,8 @@ #include <asm/arch/svinto.h> #include <asm/io.h> /* Get SIMCOUT. */ +extern void reset_watchdog(void); + struct dbg_port { unsigned int index; @@ -188,7 +100,9 @@ struct dbg_port ports[]= } }; +#ifdef CONFIG_ETRAX_SERIAL extern struct tty_driver *serial_driver; +#endif struct dbg_port* port = #if defined(CONFIG_ETRAX_DEBUG_PORT0) @@ -368,11 +282,12 @@ console_write_direct(struct console *co, const char *buf, unsigned int len) { int i; unsigned long flags; - local_irq_save(flags); if (!port) return; + local_irq_save(flags); + /* Send data */ for (i = 0; i < len; i++) { /* LF -> CRLF */ @@ -386,26 +301,16 @@ console_write_direct(struct console *co, const char *buf, unsigned int len) ; *port->write = buf[i]; } - local_irq_restore(flags); -} -int raw_printk(const char *fmt, ...) -{ - static char buf[1024]; - int printed_len; - static int first = 1; - if (first) { - /* Force reinitialization of the port to get manual mode. */ - port->started = 0; - start_port(port); - first = 0; - } - va_list args; - va_start(args, fmt); - printed_len = vsnprintf(buf, sizeof(buf), fmt, args); - va_end(args); - console_write_direct(NULL, buf, strlen(buf)); - return printed_len; + /* + * Feed the watchdog, otherwise it will reset the chip during boot. + * The time to send an ordinary boot message line (10-90 chars) + * varies between 1-8ms at 115200. What makes up for the additional + * 90ms that allows the watchdog to bite? + */ + reset_watchdog(); + + local_irq_restore(flags); } static void @@ -500,6 +405,7 @@ console_setup(struct console *co, char *options) return 0; } + /* This is a dummy serial device that throws away anything written to it. * This is used when no debug output is wanted. */ @@ -555,7 +461,13 @@ etrax_console_device(struct console* co, int *index) { if (port) *index = port->index; + else + *index = 0; +#ifdef CONFIG_ETRAX_SERIAL return port ? serial_driver : &dummy_driver; +#else + return &dummy_driver; +#endif } static struct console sercons = { diff --git a/arch/cris/arch-v10/kernel/dma.c b/arch/cris/arch-v10/kernel/dma.c index e9a0311b141d..eb1fa0d2b49f 100644 --- a/arch/cris/arch-v10/kernel/dma.c +++ b/arch/cris/arch-v10/kernel/dma.c @@ -1,6 +1,5 @@ /* Wrapper for DMA channel allocator that updates DMA client muxing. - * Copyright 2004, Axis Communications AB - * $Id: dma.c,v 1.1 2004/12/13 12:21:51 starvik Exp $ + * Copyright 2004-2007, Axis Communications AB */ #include <linux/kernel.h> diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S index d1361dc119e2..3a65f322ae07 100644 --- a/arch/cris/arch-v10/kernel/entry.S +++ b/arch/cris/arch-v10/kernel/entry.S @@ -1,252 +1,9 @@ -/* $Id: entry.S,v 1.28 2005/06/20 05:06:30 starvik Exp $ - * +/* * linux/arch/cris/entry.S * * Copyright (C) 2000, 2001, 2002 Axis Communications AB * * Authors: Bjorn Wesen (bjornw@axis.com) - * - * $Log: entry.S,v $ - * Revision 1.28 2005/06/20 05:06:30 starvik - * Remove unnecessary diff to kernel.org tree - * - * Revision 1.27 2005/03/04 08:16:16 starvik - * Merge of Linux 2.6.11. - * - * Revision 1.26 2005/01/11 13:49:47 starvik - * Added NMI handler. - * - * Revision 1.25 2004/12/27 11:18:32 starvik - * Merge of Linux 2.6.10 (not functional yet). - * - * Revision 1.24 2004/12/22 10:41:23 starvik - * Updates to make v10 compile with the latest SMP aware generic code (even - * though v10 will never have SMP). - * - * Revision 1.23 2004/10/19 13:07:37 starvik - * Merge of Linux 2.6.9 - * - * Revision 1.22 2004/06/21 10:29:55 starvik - * Merge of Linux 2.6.7 - * - * Revision 1.21 2004/06/09 05:30:27 starvik - * Clean up multiple interrupt handling. - * Prevent interrupts from interrupting each other. - * Handle all active interrupts. - * - * Revision 1.20 2004/06/08 08:55:32 starvik - * Removed unused code - * - * Revision 1.19 2004/06/04 11:56:15 starvik - * Implemented page table lookup for refills in assembler for improved performance. - * - * Revision 1.18 2004/05/11 12:28:25 starvik - * Merge of Linux 2.6.6 - * - * Revision 1.17 2003/09/11 07:29:49 starvik - * Merge of Linux 2.6.0-test5 - * - * Revision 1.16 2003/07/04 08:27:41 starvik - * Merge of Linux 2.5.74 - * - * Revision 1.15 2003/04/09 07:32:55 starvik - * resume should return task_struct, not thread_info - * - * Revision 1.14 2003/04/09 05:20:44 starvik - * Merge of Linux 2.5.67 - * - * Revision 1.13 2002/12/11 15:42:02 starvik - * Extracted v10 (ETRAX 100LX) specific stuff from arch/cris/kernel/*.c - * - * Revision 1.12 2002/12/10 09:00:10 starvik - * Merge of Linux 2.5.51 - * - * Revision 1.11 2002/12/05 07:53:10 starvik - * Corrected constants used with btstq - * - * Revision 1.10 2002/11/27 08:45:10 starvik - * pid is in task_struct, not thread_info - * - * Revision 1.9 2002/11/26 09:52:05 starvik - * Added preemptive kernel scheduling (if CONFIG_PREEMPT) - * - * Revision 1.8 2002/11/20 11:56:11 starvik - * Merge of Linux 2.5.48 - * - * Revision 1.7 2002/11/18 13:02:42 starvik - * Added fourth parameter to do_notify_resume - * Minor cleanup - * - * Revision 1.6 2002/11/11 10:37:50 starvik - * Use new asm-offset defines - * Modified for new location of current->work etc - * Removed SYMBOL_NAME from syscalls - * Added some new syscalls - * - * Revision 1.5 2002/11/05 06:45:11 starvik - * Merge of Linux 2.5.45 - * - * Revision 1.4 2002/02/05 15:41:31 bjornw - * Rewritten to conform better to current 2.5 code (similar to arch/i386) - * - * Revision 1.3 2002/01/21 15:22:20 bjornw - * NICE_DOGGY fix from 2.4 arch/cris - * - * Revision 1.37 2001/12/07 17:03:55 bjornw - * Call a c-hook called watchdog_bite_hook instead of show_registers directly - * - * Revision 1.36 2001/11/22 13:36:36 bjornw - * * In ret_from_intr, check regs->dccr for usermode reentrance instead of - * DCCR explicitly (because the latter might not reflect current reality) - * * In mmu_bus_fault, set $r9 _after_ calling the C-code instead of before - * since $r9 is call-clobbered and is potentially needed afterwards - * - * Revision 1.35 2001/10/30 17:10:15 bjornw - * Add some syscalls - * - * Revision 1.34 2001/10/01 14:45:03 bjornw - * Removed underscores and added register prefixes - * - * Revision 1.33 2001/08/21 13:48:01 jonashg - * Added fix by HP to avoid oops when doing a hard_reset_now. - * - * Revision 1.32 2001/08/14 04:32:02 hp - * In _resume, add comment why R9 is saved; don't sound like it's call-saved. - * - * Revision 1.31 2001/07/25 16:07:42 bjornw - * softirq_active/mask -> softirq_pending only - * - * Revision 1.30 2001/07/05 01:03:32 hp - * - include asm/errno.h to get ENOSYS. - * - Use ENOSYS, not local constant LENOSYS; tweak comments. - * - Explain why .include, not #include is used. - * - Make oops-register-dump if watchdog bits and it's not expected. - * - Don't jsr, use jump _hard_reset_now, and skip spurious nop. - * - Use correct section attribute for section .rodata. - * - Adjust sys_ni_syscall fill number. - * - * Revision 1.29 2001/06/25 14:07:00 hp - * Fix review comment. - * * head.S: Use IO_STATE, IO_FIELD and IO_MASK constructs instead of - * magic numbers. Add comment that -traditional must not be used. - * * entry.S (SYMBOL_NAME): Change redefinition to use ## concatenation. - * Correct and update comment. - * * Makefile (.S.o): Don't use -traditional. Add comment why the - * toplevel rule can't be used (now that there's a reason). - * - * Revision 1.28 2001/06/21 02:00:40 hp - * * entry.S: Include asm/unistd.h. - * (_sys_call_table): Use section .rodata, not .data. - * (_kernel_thread): Move from... - * * process.c: ... here. - * * entryoffsets.c (VAL): Break out from... - * (OF): Use VAL. - * (LCLONE_VM): New asmified value from CLONE_VM. - * - * Revision 1.27 2001/05/29 11:25:27 markusl - * In case of "spurious_interrupt", do hard_reset instead of hanging system in a loop... - * - * Revision 1.26 2001/05/15 15:46:03 bjornw - * Include config.h now that we use some CONFIG_ options - * - * Revision 1.25 2001/05/15 05:38:47 hp - * Tweaked code in _ret_from_sys_call - * - * Revision 1.24 2001/05/15 05:27:49 hp - * Save r9 in r1 over function call rather than on stack. - * - * Revision 1.23 2001/05/15 05:10:00 hp - * Generate entry.S structure offsets from C - * - * Revision 1.22 2001/04/17 13:58:39 orjanf - * * Renamed CONFIG_KGDB to CONFIG_ETRAX_KGDB. - * - * Revision 1.21 2001/04/17 11:33:29 orjanf - * Updated according to review: - * * Included asm/sv_addr_ag.h to get macro for internal register. - * * Corrected comment regarding system call argument passing. - * * Removed comment about instruction being in a delay slot. - * * Added comment about SYMBOL_NAME macro. - * - * Revision 1.20 2001/04/12 08:51:07 hp - * - Add entry for sys_fcntl64. In fact copy last piece from i386 including ... - * - .rept to fill table to safe state with sys_ni_syscall. - * - * Revision 1.19 2001/04/04 09:43:32 orjanf - * * Moved do_sigtrap from traps.c to entry.S. - * * LTASK_PID need not be global anymore. - * - * Revision 1.18 2001/03/26 09:25:02 markusl - * Updated after review, should now handle USB interrupts correctly. - * - * Revision 1.17 2001/03/21 16:12:55 bjornw - * * Always make room for the cpu status record in the frame, in order to - * use the same framelength and layout for both mmu busfaults and normal - * irqs. No need to check for the explicit CRIS_FRAME_FIXUP type anymore. - * * Fixed bug with using addq for popping the stack in the epilogue - it - * destroyed the flag register. Use instructions that don't affect the - * flag register instead. - * * Removed write to R_PORT_PA_DATA during spurious_interrupt - * - * Revision 1.16 2001/03/20 19:43:02 bjornw - * * Get rid of esp0 setting - * * Give a 7th argument to a systemcall - the stackframe - * - * Revision 1.15 2001/03/05 13:14:30 bjornw - * Spelling fix - * - * Revision 1.14 2001/02/23 08:36:36 perf - * New ABI; syscallnr=r9, arg5=mof, arg6=srp. - * Corrected tracesys call check. - * - * Revision 1.13 2001/02/15 08:40:55 perf - * H-P by way of perf; - * - (_system_call): Don't read system call function address into r1. - * - (RBFExit): There is no such thing as a null pop. Adjust sp by addq. - * - (_system_call): Don't use r10 and don't save and restore it. - * - (THREAD_ESP0): New constant. - * - (_system_call): Inline set_esp0. - * - * Revision 1.12 2001/01/31 17:56:25 orjanf - * Added definition of LTASK_PID and made it global. - * - * Revision 1.11 2001/01/10 21:13:29 bjornw - * SYMBOL_NAME is defined incorrectly for the compiler options we currently use - * - * Revision 1.10 2000/12/18 23:47:56 bjornw - * * Added syscall trace support (ptrace), completely untested of course - * * Removed redundant check for NULL entries in syscall_table - * - * Revision 1.9 2000/11/21 16:40:51 bjornw - * * New frame type used when an SBFS frame needs to be popped without - * actually restarting the instruction - * * Enable interrupts in signal_return (they did so in x86, I hope it's a good - * idea) - * - * Revision 1.8 2000/11/17 16:53:35 bjornw - * Added detection of frame-type in Rexit, so that mmu_bus_fault can - * use ret_from_intr in the return-path to check for signals (like SEGV) - * and other foul things that might have occurred during the fault. - * - * Revision 1.7 2000/10/06 15:04:28 bjornw - * Include mof in register savings - * - * Revision 1.6 2000/09/12 16:02:44 bjornw - * Linux-2.4.0-test7 derived updates - * - * Revision 1.5 2000/08/17 15:35:15 bjornw - * 2.4.0-test6 changed local_irq_count and friends API - * - * Revision 1.4 2000/08/02 13:59:30 bjornw - * Removed olduname and uname from the syscall list - * - * Revision 1.3 2000/07/31 13:32:58 bjornw - * * Export ret_from_intr - * * _resume updated (prev/last tjohejsan) - * * timer_interrupt obsolete - * * SIGSEGV detection in mmu_bus_fault temporarily disabled - * - * */ /* @@ -1167,9 +924,11 @@ sys_call_table: .long sys_epoll_pwait .long sys_utimensat /* 320 */ .long sys_signalfd - .long sys_ni_syscall + .long sys_timerfd_create .long sys_eventfd .long sys_fallocate + .long sys_timerfd_settime /* 325 */ + .long sys_timerfd_gettime /* * NOTE!! This doesn't have to be exact - we just have diff --git a/arch/cris/arch-v10/kernel/fasttimer.c b/arch/cris/arch-v10/kernel/fasttimer.c index c1a3a2100ee7..31ff35cff02c 100644 --- a/arch/cris/arch-v10/kernel/fasttimer.c +++ b/arch/cris/arch-v10/kernel/fasttimer.c @@ -31,15 +31,12 @@ #define DEBUG_LOG_INCLUDED #define FAST_TIMER_LOG -//#define FAST_TIMER_TEST +/* #define FAST_TIMER_TEST */ #define FAST_TIMER_SANITY_CHECKS #ifdef FAST_TIMER_SANITY_CHECKS -#define SANITYCHECK(x) x static int sanity_failed; -#else -#define SANITYCHECK(x) #endif #define D1(x) @@ -226,23 +223,19 @@ void start_one_shot_timer(struct fast_timer *t, do_gettimeofday_fast(&t->tv_set); tmp = fast_timer_list; - SANITYCHECK({ /* Check so this is not in the list already... */ - while (tmp != NULL) - { - if (tmp == t) - { - printk(KERN_WARNING - "timer name: %s data: 0x%08lX already in list!\n", name, data); - sanity_failed++; - goto done; - } - else - { - tmp = tmp->next; - } - } - tmp = fast_timer_list; - }); +#ifdef FAST_TIMER_SANITY_CHECKS + /* Check so this is not in the list already... */ + while (tmp != NULL) { + if (tmp == t) { + printk(KERN_WARNING "timer name: %s data: " + "0x%08lX already in list!\n", name, data); + sanity_failed++; + goto done; + } else + tmp = tmp->next; + } + tmp = fast_timer_list; +#endif t->delay_us = delay_us; t->function = function; diff --git a/arch/cris/arch-v10/kernel/head.S b/arch/cris/arch-v10/kernel/head.S index d946d8b8d277..96344afc4ebc 100644 --- a/arch/cris/arch-v10/kernel/head.S +++ b/arch/cris/arch-v10/kernel/head.S @@ -1,186 +1,10 @@ -/* $Id: head.S,v 1.10 2005/06/20 05:12:54 starvik Exp $ - * +/* * Head of the kernel - alter with care * * Copyright (C) 2000, 2001 Axis Communications AB * * Authors: Bjorn Wesen (bjornw@axis.com) * - * $Log: head.S,v $ - * Revision 1.10 2005/06/20 05:12:54 starvik - * Remove unnecessary diff to kernel.org tree - * - * Revision 1.9 2004/12/13 12:21:51 starvik - * Added I/O and DMA allocators from Linux 2.4 - * - * Revision 1.8 2004/11/22 11:41:14 starvik - * Kernel command line may be supplied to kernel. Not used by Axis but may - * be used by customers. - * - * Revision 1.7 2004/05/14 07:58:01 starvik - * Merge of changes from 2.4 - * - * Revision 1.6 2003/04/28 05:31:46 starvik - * Added section attributes - * - * Revision 1.5 2002/12/11 15:42:02 starvik - * Extracted v10 (ETRAX 100LX) specific stuff from arch/cris/kernel/*.c - * - * Revision 1.4 2002/11/07 09:00:44 starvik - * Names changed for init sections - * init_task_union -> init_thread_union - * - * Revision 1.3 2002/02/05 15:38:23 bjornw - * Oops.. non-CRAMFS_MAGIC should jump over the copying, not into it... - * - * Revision 1.2 2001/12/18 13:35:19 bjornw - * Applied the 2.4.13->2.4.16 CRIS patch to 2.5.1 (is a copy of 2.4.15). - * - * Revision 1.43 2001/11/08 15:09:43 starvik - * Only start MII clock if Ethernet is configured - * - * Revision 1.42 2001/11/08 14:37:34 starvik - * Start MII clock early to make sure that it is running at tranceiver reset - * - * Revision 1.41 2001/10/29 14:55:58 pkj - * Corrected pa$r0 to par0. - * - * Revision 1.40 2001/10/03 14:59:57 pkj - * Added support for resetting the Bluetooth hardware. - * - * Revision 1.39 2001/10/01 14:45:03 bjornw - * Removed underscores and added register prefixes - * - * Revision 1.38 2001/09/21 07:14:11 jonashg - * Made root filesystem (cramfs) use mtdblock driver when booting from flash. - * - * Revision 1.37 2001/09/11 13:44:29 orjanf - * Decouple usage of serial ports for debug and kgdb. - * - * Revision 1.36 2001/06/29 12:39:31 pkj - * Added support for mirroring the first flash to just below the - * second one, to make them look consecutive to cramfs. - * - * Revision 1.35 2001/06/25 14:07:00 hp - * Fix review comment. - * * head.S: Use IO_STATE, IO_FIELD and IO_MASK constructs instead of - * magic numbers. Add comment that -traditional must not be used. - * * entry.S (SYMBOL_NAME): Change redefinition to use ## concatenation. - * Correct and update comment. - * * Makefile (.S.o): Don't use -traditional. Add comment why the - * toplevel rule can't be used (now that there's a reason). - * - * Revision 1.34 2001/05/15 07:08:14 hp - * Tweak "notice" to reflect that both r8 r9 are used - * - * Revision 1.33 2001/05/15 06:40:05 hp - * Put bulk of code in .text.init, data in .data.init - * - * Revision 1.32 2001/05/15 06:18:56 hp - * Execute review comment: s/bcc/bhs/g; s/bcs/blo/g - * - * Revision 1.31 2001/05/15 06:08:40 hp - * Add sentence about autodetecting the bit31-MMU-bug - * - * Revision 1.30 2001/05/15 06:00:05 hp - * Update comment: LOW_MAP is not forced on xsim anymore. - * - * Revision 1.29 2001/04/18 12:51:59 orjanf - * * Reverted review change regarding the use of bcs/bcc. - * * Removed non-working LED-clearing code. - * - * Revision 1.28 2001/04/17 13:58:39 orjanf - * * Renamed CONFIG_KGDB to CONFIG_ETRAX_KGDB. - * - * Revision 1.27 2001/04/17 11:42:35 orjanf - * Changed according to review: - * * Added comment explaining memory map bug. - * * Changed bcs and bcc to blo and bhs, respectively. - * * Removed mentioning of Stallone and Olga boards. - * - * Revision 1.26 2001/04/06 12:31:07 jonashg - * Check for cramfs in flash before RAM instead of RAM before flash. - * - * Revision 1.25 2001/04/04 06:23:53 starvik - * Initialize DRAM if not already initialized - * - * Revision 1.24 2001/04/03 11:12:00 starvik - * Removed dram init (done by rescue or etrax100boot - * Corrected include - * - * Revision 1.23 2001/04/03 09:53:03 starvik - * Include hw_settings.S - * - * Revision 1.22 2001/03/26 14:23:26 bjornw - * Namechange of some config options - * - * Revision 1.21 2001/03/08 12:14:41 bjornw - * * Config name for ETRAX IDE was renamed - * * Removed G27 auto-setting when JULIETTE is chosen (need to make this - * a new config option later) - * - * Revision 1.20 2001/02/23 12:47:56 bjornw - * MMU regs during LOW_MAP updated to reflect a newer reality - * - * Revision 1.19 2001/02/19 11:12:07 bjornw - * Changed comment header format - * - * Revision 1.18 2001/02/15 07:25:38 starvik - * Added support for synchronous serial ports - * - * Revision 1.17 2001/02/08 15:53:13 starvik - * Last commit removed some important ifdefs - * - * Revision 1.16 2001/02/08 15:20:38 starvik - * Include dram_init.S as inline - * - * Revision 1.15 2001/01/29 18:12:01 bjornw - * Corrected some comments - * - * Revision 1.14 2001/01/29 13:11:29 starvik - * Include dram_init.S (with DRAM/SDRAM initialization) - * - * Revision 1.13 2001/01/23 14:54:57 markusl - * Updated for USB - * i.e. added r_gen_config settings - * - * Revision 1.12 2001/01/19 16:16:29 perf - * Added temporary mapping of 0x0c->0x0c to avoid flash loading confusion. - * Renamed serial options from ETRAX100 to ETRAX. - * - * Revision 1.11 2001/01/16 16:31:38 bjornw - * * Changed name and semantics of running_from_flash to romfs_in_flash, - * set by head.S to indicate to setup.c whether there is a cramfs image - * after the kernels BSS or not. Should work for all three boot-cases - * (DRAM with cramfs in DRAM, DRAM with cramfs in flash (compressed boot), - * and flash with cramfs in flash) - * - * Revision 1.10 2001/01/16 14:12:21 bjornw - * * Check for cramfs start passed in r9 from the decompressor, if all other - * cramfs options fail (if we boot from DRAM but don't find a cramfs image - * after the kernel in DRAM, it is probably still in the flash) - * * Check magic in cramfs detection when booting from flash directly - * - * Revision 1.9 2001/01/15 17:17:02 bjornw - * * Corrected the code that detects the cramfs lengths - * * Added a comment saying that the above does not work due to other - * reasons.. - * - * Revision 1.8 2001/01/15 16:27:51 jonashg - * Made boot after flashing work. - * * end destination is __vmlinux_end in RAM. - * * _romfs_start moved because of virtual memory. - * - * Revision 1.7 2000/11/21 13:55:29 bjornw - * Use CONFIG_CRIS_LOW_MAP for the low VM map instead of explicit CPU type - * - * Revision 1.6 2000/10/06 12:36:55 bjornw - * Forgot swapper_pg_dir when changing memory map.. - * - * Revision 1.5 2000/10/04 16:49:30 bjornw - * * Fixed memory mapping in LX - * * Check for cramfs instead of romfs - * */ #define ASSEMBLER_MACROS_ONLY @@ -595,11 +419,17 @@ no_command_line: moveq 0,$r0 + ;; Select or disable serial port 2 +#ifdef CONFIG_ETRAX_SERIAL_PORT2 + or.d IO_STATE (R_GEN_CONFIG, ser2, select),$r0 +#else + or.d IO_STATE (R_GEN_CONFIG, ser2, disable),$r0 +#endif + ;; Init interfaces (disable them). or.d IO_STATE (R_GEN_CONFIG, scsi0, disable) \ | IO_STATE (R_GEN_CONFIG, ata, disable) \ | IO_STATE (R_GEN_CONFIG, par0, disable) \ - | IO_STATE (R_GEN_CONFIG, ser2, disable) \ | IO_STATE (R_GEN_CONFIG, mio, disable) \ | IO_STATE (R_GEN_CONFIG, scsi1, disable) \ | IO_STATE (R_GEN_CONFIG, scsi0w, disable) \ @@ -801,6 +631,41 @@ no_command_line: | IO_STATE (R_SERIAL1_TR_CTRL, tr_bitnr, tr_8bit),$r0 move.b $r0,[R_SERIAL1_TR_CTRL] +#ifdef CONFIG_ETRAX_SERIAL_PORT2 + ;; setup the serial port 2 at 115200 baud for debug purposes + + moveq IO_STATE (R_SERIAL2_XOFF, tx_stop, enable) \ + | IO_STATE (R_SERIAL2_XOFF, auto_xoff, disable) \ + | IO_FIELD (R_SERIAL2_XOFF, xoff_char, 0),$r0 + move.d $r0,[R_SERIAL2_XOFF] + + ; 115.2kbaud for both transmit and receive + move.b IO_STATE (R_SERIAL2_BAUD, tr_baud, c115k2Hz) \ + | IO_STATE (R_SERIAL2_BAUD, rec_baud, c115k2Hz),$r0 + move.b $r0,[R_SERIAL2_BAUD] + + ; Set up and enable the serial2 receiver. + move.b IO_STATE (R_SERIAL2_REC_CTRL, dma_err, stop) \ + | IO_STATE (R_SERIAL2_REC_CTRL, rec_enable, enable) \ + | IO_STATE (R_SERIAL2_REC_CTRL, rts_, active) \ + | IO_STATE (R_SERIAL2_REC_CTRL, sampling, middle) \ + | IO_STATE (R_SERIAL2_REC_CTRL, rec_stick_par, normal) \ + | IO_STATE (R_SERIAL2_REC_CTRL, rec_par, even) \ + | IO_STATE (R_SERIAL2_REC_CTRL, rec_par_en, disable) \ + | IO_STATE (R_SERIAL2_REC_CTRL, rec_bitnr, rec_8bit),$r0 + move.b $r0,[R_SERIAL2_REC_CTRL] + + ; Set up and enable the serial2 transmitter. + move.b IO_FIELD (R_SERIAL2_TR_CTRL, txd, 0) \ + | IO_STATE (R_SERIAL2_TR_CTRL, tr_enable, enable) \ + | IO_STATE (R_SERIAL2_TR_CTRL, auto_cts, disabled) \ + | IO_STATE (R_SERIAL2_TR_CTRL, stop_bits, one_bit) \ + | IO_STATE (R_SERIAL2_TR_CTRL, tr_stick_par, normal) \ + | IO_STATE (R_SERIAL2_TR_CTRL, tr_par, even) \ + | IO_STATE (R_SERIAL2_TR_CTRL, tr_par_en, disable) \ + | IO_STATE (R_SERIAL2_TR_CTRL, tr_bitnr, tr_8bit),$r0 + move.b $r0,[R_SERIAL2_TR_CTRL] +#endif #ifdef CONFIG_ETRAX_SERIAL_PORT3 ;; setup the serial port 3 at 115200 baud for debug purposes diff --git a/arch/cris/arch-v10/kernel/io_interface_mux.c b/arch/cris/arch-v10/kernel/io_interface_mux.c index f3b327d4ed9c..add98e0941b5 100644 --- a/arch/cris/arch-v10/kernel/io_interface_mux.c +++ b/arch/cris/arch-v10/kernel/io_interface_mux.c @@ -1,10 +1,9 @@ /* IO interface mux allocator for ETRAX100LX. - * Copyright 2004, Axis Communications AB - * $Id: io_interface_mux.c,v 1.2 2004/12/21 12:08:38 starvik Exp $ + * Copyright 2004-2007, Axis Communications AB */ -/* C.f. ETRAX100LX Designer's Reference 20.9 */ +/* C.f. ETRAX100LX Designer's Reference chapter 19.9 */ #include <linux/kernel.h> #include <linux/slab.h> @@ -45,17 +44,39 @@ struct watcher struct if_group { enum io_if_group group; - unsigned char used; - enum cris_io_interface owner; + /* name - the name of the group 'A' to 'F' */ + char *name; + /* used - a bit mask of all pins in the group in the order listed + * in the tables in 19.9.1 to 19.9.6. Note that no + * distinction is made between in, out and in/out pins. */ + unsigned int used; }; struct interface { enum cris_io_interface ioif; + /* name - the name of the interface */ + char *name; + /* groups - OR'ed together io_if_group flags describing what pin groups + * the interface uses pins in. */ unsigned char groups; + /* used - set when the interface is allocated. */ unsigned char used; char *owner; + /* group_a through group_f - bit masks describing what pins in the + * pin groups the interface uses. */ + unsigned int group_a; + unsigned int group_b; + unsigned int group_c; + unsigned int group_d; + unsigned int group_e; + unsigned int group_f; + + /* gpio_g_in, gpio_g_out, gpio_b - bit masks telling what pins in the + * GPIO ports the interface uses. This could be reconstucted using + * the group_X masks and a table of what pins the GPIO ports use, + * but that would be messy. */ unsigned int gpio_g_in; unsigned int gpio_g_out; unsigned char gpio_b; @@ -64,26 +85,32 @@ struct interface static struct if_group if_groups[6] = { { .group = group_a, + .name = "A", .used = 0, }, { .group = group_b, + .name = "B", .used = 0, }, { .group = group_c, + .name = "C", .used = 0, }, { .group = group_d, + .name = "D", .used = 0, }, { .group = group_e, + .name = "E", .used = 0, }, { .group = group_f, + .name = "F", .used = 0, } }; @@ -94,14 +121,32 @@ static struct interface interfaces[] = { /* Begin Non-multiplexed interfaces */ { .ioif = if_eth, + .name = "ethernet", .groups = 0, + + .group_a = 0, + .group_b = 0, + .group_c = 0, + .group_d = 0, + .group_e = 0, + .group_f = 0, + .gpio_g_in = 0, .gpio_g_out = 0, .gpio_b = 0 }, { .ioif = if_serial_0, + .name = "serial_0", .groups = 0, + + .group_a = 0, + .group_b = 0, + .group_c = 0, + .group_d = 0, + .group_e = 0, + .group_f = 0, + .gpio_g_in = 0, .gpio_g_out = 0, .gpio_b = 0 @@ -109,172 +154,385 @@ static struct interface interfaces[] = { /* End Non-multiplexed interfaces */ { .ioif = if_serial_1, + .name = "serial_1", .groups = group_e, + + .group_a = 0, + .group_b = 0, + .group_c = 0, + .group_d = 0, + .group_e = 0x0f, + .group_f = 0, + .gpio_g_in = 0x00000000, .gpio_g_out = 0x00000000, .gpio_b = 0x00 }, { .ioif = if_serial_2, + .name = "serial_2", .groups = group_b, + + .group_a = 0, + .group_b = 0x0f, + .group_c = 0, + .group_d = 0, + .group_e = 0, + .group_f = 0, + .gpio_g_in = 0x000000c0, .gpio_g_out = 0x000000c0, .gpio_b = 0x00 }, { .ioif = if_serial_3, + .name = "serial_3", .groups = group_c, + + .group_a = 0, + .group_b = 0, + .group_c = 0x0f, + .group_d = 0, + .group_e = 0, + .group_f = 0, + .gpio_g_in = 0xc0000000, .gpio_g_out = 0xc0000000, .gpio_b = 0x00 }, { .ioif = if_sync_serial_1, - .groups = group_e | group_f, /* if_sync_serial_1 and if_sync_serial_3 - can be used simultaneously */ + .name = "sync_serial_1", + .groups = group_e | group_f, + + .group_a = 0, + .group_b = 0, + .group_c = 0, + .group_d = 0, + .group_e = 0x0f, + .group_f = 0x10, + .gpio_g_in = 0x00000000, .gpio_g_out = 0x00000000, .gpio_b = 0x10 }, { .ioif = if_sync_serial_3, + .name = "sync_serial_3", .groups = group_c | group_f, + + .group_a = 0, + .group_b = 0, + .group_c = 0x0f, + .group_d = 0, + .group_e = 0, + .group_f = 0x80, + .gpio_g_in = 0xc0000000, .gpio_g_out = 0xc0000000, .gpio_b = 0x80 }, { .ioif = if_shared_ram, + .name = "shared_ram", .groups = group_a, + + .group_a = 0x7f8ff, + .group_b = 0, + .group_c = 0, + .group_d = 0, + .group_e = 0, + .group_f = 0, + .gpio_g_in = 0x0000ff3e, .gpio_g_out = 0x0000ff38, .gpio_b = 0x00 }, { .ioif = if_shared_ram_w, + .name = "shared_ram_w", .groups = group_a | group_d, + + .group_a = 0x7f8ff, + .group_b = 0, + .group_c = 0, + .group_d = 0xff, + .group_e = 0, + .group_f = 0, + .gpio_g_in = 0x00ffff3e, .gpio_g_out = 0x00ffff38, .gpio_b = 0x00 }, { .ioif = if_par_0, + .name = "par_0", .groups = group_a, + + .group_a = 0x7fbff, + .group_b = 0, + .group_c = 0, + .group_d = 0, + .group_e = 0, + .group_f = 0, + .gpio_g_in = 0x0000ff3e, .gpio_g_out = 0x0000ff3e, .gpio_b = 0x00 }, { .ioif = if_par_1, + .name = "par_1", .groups = group_d, + + .group_a = 0, + .group_b = 0, + .group_c = 0, + .group_d = 0x7feff, + .group_e = 0, + .group_f = 0, + .gpio_g_in = 0x3eff0000, .gpio_g_out = 0x3eff0000, .gpio_b = 0x00 }, { .ioif = if_par_w, + .name = "par_w", .groups = group_a | group_d, + + .group_a = 0x7fbff, + .group_b = 0, + .group_c = 0, + .group_d = 0xff, + .group_e = 0, + .group_f = 0, + .gpio_g_in = 0x00ffff3e, .gpio_g_out = 0x00ffff3e, .gpio_b = 0x00 }, { .ioif = if_scsi8_0, - .groups = group_a | group_b | group_f, /* if_scsi8_0 and if_scsi8_1 - can be used simultaneously */ + .name = "scsi8_0", + .groups = group_a | group_b | group_f, + + .group_a = 0x7ffff, + .group_b = 0x0f, + .group_c = 0, + .group_d = 0, + .group_e = 0, + .group_f = 0x10, + .gpio_g_in = 0x0000ffff, .gpio_g_out = 0x0000ffff, .gpio_b = 0x10 }, { .ioif = if_scsi8_1, - .groups = group_c | group_d | group_f, /* if_scsi8_0 and if_scsi8_1 - can be used simultaneously */ + .name = "scsi8_1", + .groups = group_c | group_d | group_f, + + .group_a = 0, + .group_b = 0, + .group_c = 0x0f, + .group_d = 0x7ffff, + .group_e = 0, + .group_f = 0x80, + .gpio_g_in = 0xffff0000, .gpio_g_out = 0xffff0000, .gpio_b = 0x80 }, { .ioif = if_scsi_w, + .name = "scsi_w", .groups = group_a | group_b | group_d | group_f, + + .group_a = 0x7ffff, + .group_b = 0x0f, + .group_c = 0, + .group_d = 0x601ff, + .group_e = 0, + .group_f = 0x90, + .gpio_g_in = 0x01ffffff, .gpio_g_out = 0x07ffffff, .gpio_b = 0x80 }, { .ioif = if_ata, + .name = "ata", .groups = group_a | group_b | group_c | group_d, + + .group_a = 0x7ffff, + .group_b = 0x0f, + .group_c = 0x0f, + .group_d = 0x7cfff, + .group_e = 0, + .group_f = 0, + .gpio_g_in = 0xf9ffffff, .gpio_g_out = 0xffffffff, .gpio_b = 0x80 }, { .ioif = if_csp, - .groups = group_f, /* if_csp and if_i2c can be used simultaneously */ + .name = "csp", + .groups = group_f, + + .group_a = 0, + .group_b = 0, + .group_c = 0, + .group_d = 0, + .group_e = 0, + .group_f = 0xfc, + .gpio_g_in = 0x00000000, .gpio_g_out = 0x00000000, .gpio_b = 0xfc }, { .ioif = if_i2c, - .groups = group_f, /* if_csp and if_i2c can be used simultaneously */ + .name = "i2c", + .groups = group_f, + + .group_a = 0, + .group_b = 0, + .group_c = 0, + .group_d = 0, + .group_e = 0, + .group_f = 0x03, + .gpio_g_in = 0x00000000, .gpio_g_out = 0x00000000, .gpio_b = 0x03 }, { .ioif = if_usb_1, + .name = "usb_1", .groups = group_e | group_f, + + .group_a = 0, + .group_b = 0, + .group_c = 0, + .group_d = 0, + .group_e = 0x0f, + .group_f = 0x2c, + .gpio_g_in = 0x00000000, .gpio_g_out = 0x00000000, .gpio_b = 0x2c }, { .ioif = if_usb_2, + .name = "usb_2", .groups = group_d, - .gpio_g_in = 0x0e000000, - .gpio_g_out = 0x3c000000, + + .group_a = 0, + .group_b = 0, + .group_c = 0, + .group_d = 0, + .group_e = 0x33e00, + .group_f = 0, + + .gpio_g_in = 0x3e000000, + .gpio_g_out = 0x0c000000, .gpio_b = 0x00 }, /* GPIO pins */ { .ioif = if_gpio_grp_a, + .name = "gpio_a", .groups = group_a, + + .group_a = 0, + .group_b = 0, + .group_c = 0, + .group_d = 0, + .group_e = 0, + .group_f = 0, + .gpio_g_in = 0x0000ff3f, .gpio_g_out = 0x0000ff3f, .gpio_b = 0x00 }, { .ioif = if_gpio_grp_b, + .name = "gpio_b", .groups = group_b, + + .group_a = 0, + .group_b = 0, + .group_c = 0, + .group_d = 0, + .group_e = 0, + .group_f = 0, + .gpio_g_in = 0x000000c0, .gpio_g_out = 0x000000c0, .gpio_b = 0x00 }, { .ioif = if_gpio_grp_c, + .name = "gpio_c", .groups = group_c, + + .group_a = 0, + .group_b = 0, + .group_c = 0, + .group_d = 0, + .group_e = 0, + .group_f = 0, + .gpio_g_in = 0xc0000000, .gpio_g_out = 0xc0000000, .gpio_b = 0x00 }, { .ioif = if_gpio_grp_d, + .name = "gpio_d", .groups = group_d, + + .group_a = 0, + .group_b = 0, + .group_c = 0, + .group_d = 0, + .group_e = 0, + .group_f = 0, + .gpio_g_in = 0x3fff0000, .gpio_g_out = 0x3fff0000, .gpio_b = 0x00 }, { .ioif = if_gpio_grp_e, + .name = "gpio_e", .groups = group_e, + + .group_a = 0, + .group_b = 0, + .group_c = 0, + .group_d = 0, + .group_e = 0, + .group_f = 0, + .gpio_g_in = 0x00000000, .gpio_g_out = 0x00000000, .gpio_b = 0x00 }, { .ioif = if_gpio_grp_f, + .name = "gpio_f", .groups = group_f, + + .group_a = 0, + .group_b = 0, + .group_c = 0, + .group_d = 0, + .group_e = 0, + .group_f = 0, + .gpio_g_in = 0x00000000, .gpio_g_out = 0x00000000, .gpio_b = 0xff @@ -284,11 +542,13 @@ static struct interface interfaces[] = { static struct watcher *watchers = NULL; +/* The pins that are free to use in the GPIO ports. */ static unsigned int gpio_in_pins = 0xffffffff; static unsigned int gpio_out_pins = 0xffffffff; static unsigned char gpio_pb_pins = 0xff; static unsigned char gpio_pa_pins = 0xff; +/* Identifiers for the owners of the GPIO pins. */ static enum cris_io_interface gpio_pa_owners[8]; static enum cris_io_interface gpio_pb_owners[8]; static enum cris_io_interface gpio_pg_owners[32]; @@ -338,13 +598,15 @@ int cris_request_io_interface(enum cris_io_interface ioif, const char *device_id struct if_group *grp; unsigned char group_set; unsigned long flags; + int res = 0; (void)cris_io_interface_init(); DBG(printk("cris_request_io_interface(%d, \"%s\")\n", ioif, device_id)); if ((ioif >= if_max_interfaces) || (ioif < 0)) { - printk(KERN_CRIT "cris_request_io_interface: Bad interface %u submitted for %s\n", + printk(KERN_CRIT "cris_request_io_interface: Bad interface " + "%u submitted for %s\n", ioif, device_id); return -EINVAL; @@ -353,59 +615,69 @@ int cris_request_io_interface(enum cris_io_interface ioif, const char *device_id local_irq_save(flags); if (interfaces[ioif].used) { - local_irq_restore(flags); - printk(KERN_CRIT "cris_io_interface: Cannot allocate interface for %s, in use by %s\n", + printk(KERN_CRIT "cris_io_interface: Cannot allocate interface " + "%s for %s, in use by %s\n", + interfaces[ioif].name, device_id, interfaces[ioif].owner); - return -EBUSY; + res = -EBUSY; + goto exit; } - /* Check that all required groups are free before allocating, */ + /* Check that all required pins in the used groups are free + * before allocating. */ group_set = interfaces[ioif].groups; while (NULL != (grp = get_group(group_set))) { - if (grp->used) { - if (grp->group == group_f) { - if ((if_sync_serial_1 == ioif) || - (if_sync_serial_3 == ioif)) { - if ((grp->owner != if_sync_serial_1) && - (grp->owner != if_sync_serial_3)) { - local_irq_restore(flags); - return -EBUSY; - } - } else if ((if_scsi8_0 == ioif) || - (if_scsi8_1 == ioif)) { - if ((grp->owner != if_scsi8_0) && - (grp->owner != if_scsi8_1)) { - local_irq_restore(flags); - return -EBUSY; - } - } - } else { - local_irq_restore(flags); - return -EBUSY; - } + unsigned int if_group_use = 0; + + switch (grp->group) { + case group_a: + if_group_use = interfaces[ioif].group_a; + break; + case group_b: + if_group_use = interfaces[ioif].group_b; + break; + case group_c: + if_group_use = interfaces[ioif].group_c; + break; + case group_d: + if_group_use = interfaces[ioif].group_d; + break; + case group_e: + if_group_use = interfaces[ioif].group_e; + break; + case group_f: + if_group_use = interfaces[ioif].group_f; + break; + default: + BUG_ON(1); } + + if (if_group_use & grp->used) { + printk(KERN_INFO "cris_request_io_interface: group " + "%s needed by %s not available\n", + grp->name, interfaces[ioif].name); + res = -EBUSY; + goto exit; + } + group_set = clear_group_from_set(group_set, grp); } /* Are the required GPIO pins available too? */ - if (((interfaces[ioif].gpio_g_in & gpio_in_pins) != interfaces[ioif].gpio_g_in) || - ((interfaces[ioif].gpio_g_out & gpio_out_pins) != interfaces[ioif].gpio_g_out) || - ((interfaces[ioif].gpio_b & gpio_pb_pins) != interfaces[ioif].gpio_b)) { - local_irq_restore(flags); - printk(KERN_CRIT "cris_request_io_interface: Could not get required pins for interface %u\n", - ioif); - return -EBUSY; - } - - /* All needed I/O pins and pin groups are free, allocate. */ - group_set = interfaces[ioif].groups; - while (NULL != (grp = get_group(group_set))) { - grp->used = 1; - grp->owner = ioif; - group_set = clear_group_from_set(group_set, grp); + if (((interfaces[ioif].gpio_g_in & gpio_in_pins) != + interfaces[ioif].gpio_g_in) || + ((interfaces[ioif].gpio_g_out & gpio_out_pins) != + interfaces[ioif].gpio_g_out) || + ((interfaces[ioif].gpio_b & gpio_pb_pins) != + interfaces[ioif].gpio_b)) { + printk(KERN_CRIT "cris_request_io_interface: Could not get " + "required pins for interface %u\n", ioif); + res = -EBUSY; + goto exit; } + /* Check which registers need to be reconfigured. */ gens = genconfig_shadow; gens_ii = gen_config_ii_shadow; @@ -495,9 +767,43 @@ int cris_request_io_interface(enum cris_io_interface ioif, const char *device_id set_gen_config = 0; break; default: - panic("cris_request_io_interface: Bad interface %u submitted for %s\n", - ioif, - device_id); + printk(KERN_INFO "cris_request_io_interface: Bad interface " + "%u submitted for %s\n", + ioif, device_id); + res = -EBUSY; + goto exit; + } + + /* All needed I/O pins and pin groups are free, allocate. */ + group_set = interfaces[ioif].groups; + while (NULL != (grp = get_group(group_set))) { + unsigned int if_group_use = 0; + + switch (grp->group) { + case group_a: + if_group_use = interfaces[ioif].group_a; + break; + case group_b: + if_group_use = interfaces[ioif].group_b; + break; + case group_c: + if_group_use = interfaces[ioif].group_c; + break; + case group_d: + if_group_use = interfaces[ioif].group_d; + break; + case group_e: + if_group_use = interfaces[ioif].group_e; + break; + case group_f: + if_group_use = interfaces[ioif].group_f; + break; + default: + BUG_ON(1); + } + grp->used |= if_group_use; + + group_set = clear_group_from_set(group_set, grp); } interfaces[ioif].used = 1; @@ -516,25 +822,28 @@ int cris_request_io_interface(enum cris_io_interface ioif, const char *device_id *R_GEN_CONFIG_II = gen_config_ii_shadow; } - DBG(printk("GPIO pins: available before: g_in=0x%08x g_out=0x%08x pb=0x%02x\n", - gpio_in_pins, gpio_out_pins, gpio_pb_pins)); - DBG(printk("grabbing pins: g_in=0x%08x g_out=0x%08x pb=0x%02x\n", - interfaces[ioif].gpio_g_in, - interfaces[ioif].gpio_g_out, - interfaces[ioif].gpio_b)); + DBG(printk(KERN_DEBUG "GPIO pins: available before: " + "g_in=0x%08x g_out=0x%08x pb=0x%02x\n", + gpio_in_pins, gpio_out_pins, gpio_pb_pins)); + DBG(printk(KERN_DEBUG + "grabbing pins: g_in=0x%08x g_out=0x%08x pb=0x%02x\n", + interfaces[ioif].gpio_g_in, + interfaces[ioif].gpio_g_out, + interfaces[ioif].gpio_b)); gpio_in_pins &= ~interfaces[ioif].gpio_g_in; gpio_out_pins &= ~interfaces[ioif].gpio_g_out; gpio_pb_pins &= ~interfaces[ioif].gpio_b; - DBG(printk("GPIO pins: available after: g_in=0x%08x g_out=0x%08x pb=0x%02x\n", - gpio_in_pins, gpio_out_pins, gpio_pb_pins)); + DBG(printk(KERN_DEBUG "GPIO pins: available after: " + "g_in=0x%08x g_out=0x%08x pb=0x%02x\n", + gpio_in_pins, gpio_out_pins, gpio_pb_pins)); +exit: local_irq_restore(flags); - - notify_watchers(); - - return 0; + if (res == 0) + notify_watchers(); + return res; } @@ -560,43 +869,35 @@ void cris_free_io_interface(enum cris_io_interface ioif) } group_set = interfaces[ioif].groups; while (NULL != (grp = get_group(group_set))) { - if (grp->group == group_f) { - switch (ioif) - { - case if_sync_serial_1: - if ((grp->owner == if_sync_serial_1) && - interfaces[if_sync_serial_3].used) { - grp->owner = if_sync_serial_3; - } else - grp->used = 0; - break; - case if_sync_serial_3: - if ((grp->owner == if_sync_serial_3) && - interfaces[if_sync_serial_1].used) { - grp->owner = if_sync_serial_1; - } else - grp->used = 0; - break; - case if_scsi8_0: - if ((grp->owner == if_scsi8_0) && - interfaces[if_scsi8_1].used) { - grp->owner = if_scsi8_1; - } else - grp->used = 0; - break; - case if_scsi8_1: - if ((grp->owner == if_scsi8_1) && - interfaces[if_scsi8_0].used) { - grp->owner = if_scsi8_0; - } else - grp->used = 0; - break; - default: - grp->used = 0; - } - } else { - grp->used = 0; + unsigned int if_group_use = 0; + + switch (grp->group) { + case group_a: + if_group_use = interfaces[ioif].group_a; + break; + case group_b: + if_group_use = interfaces[ioif].group_b; + break; + case group_c: + if_group_use = interfaces[ioif].group_c; + break; + case group_d: + if_group_use = interfaces[ioif].group_d; + break; + case group_e: + if_group_use = interfaces[ioif].group_e; + break; + case group_f: + if_group_use = interfaces[ioif].group_f; + break; + default: + BUG_ON(1); } + + if ((grp->used & if_group_use) != if_group_use) + BUG_ON(1); + grp->used = grp->used & ~if_group_use; + group_set = clear_group_from_set(group_set, grp); } interfaces[ioif].used = 0; diff --git a/arch/cris/arch-v10/kernel/irq.c b/arch/cris/arch-v10/kernel/irq.c index e06ab0050d37..65ed803dae6f 100644 --- a/arch/cris/arch-v10/kernel/irq.c +++ b/arch/cris/arch-v10/kernel/irq.c @@ -1,5 +1,4 @@ -/* $Id: irq.c,v 1.4 2005/01/04 12:22:28 starvik Exp $ - * +/* * linux/arch/cris/kernel/irq.c * * Copyright (c) 2000-2002 Axis Communications AB @@ -18,10 +17,6 @@ #include <linux/kernel.h> #include <linux/init.h> -/* From kgdb.c. */ -extern void kgdb_init(void); -extern void breakpoint(void); - #define mask_irq(irq_nr) (*R_VECT_MASK_CLR = 1 << (irq_nr)); #define unmask_irq(irq_nr) (*R_VECT_MASK_SET = 1 << (irq_nr)); diff --git a/arch/cris/arch-v10/kernel/kgdb.c b/arch/cris/arch-v10/kernel/kgdb.c index 77f4b1423725..a3ca55150745 100644 --- a/arch/cris/arch-v10/kernel/kgdb.c +++ b/arch/cris/arch-v10/kernel/kgdb.c @@ -17,66 +17,8 @@ *! Jun 17 1999 Hendrik Ruijter Added gdb 4.18 support. 'X', 'qC' and 'qL'. *! Jul 21 1999 Bjorn Wesen eLinux port *! -*! $Log: kgdb.c,v $ -*! Revision 1.6 2005/01/14 10:12:17 starvik -*! KGDB on separate port. -*! Console fixes from 2.4. -*! -*! Revision 1.5 2004/10/07 13:59:08 starvik -*! Corrected call to set_int_vector -*! -*! Revision 1.4 2003/04/09 05:20:44 starvik -*! Merge of Linux 2.5.67 -*! -*! Revision 1.3 2003/01/21 19:11:08 starvik -*! Modified include path for new dir layout -*! -*! Revision 1.2 2002/11/19 14:35:24 starvik -*! Changes from linux 2.4 -*! Changed struct initializer syntax to the currently preferred notation -*! -*! Revision 1.1 2001/12/17 13:59:27 bjornw -*! Initial revision -*! -*! Revision 1.6 2001/10/09 13:10:03 matsfg -*! Added $ on registers and removed some underscores -*! -*! Revision 1.5 2001/04/17 13:58:39 orjanf -*! * Renamed CONFIG_KGDB to CONFIG_ETRAX_KGDB. -*! -*! Revision 1.4 2001/02/23 13:45:19 bjornw -*! config.h check -*! -*! Revision 1.3 2001/01/31 18:08:23 orjanf -*! Removed kgdb_handle_breakpoint from being the break 8 handler. -*! -*! Revision 1.2 2001/01/12 14:22:25 orjanf -*! Updated kernel debugging support to work with ETRAX 100LX. -*! -*! Revision 1.1 2000/07/10 16:25:21 bjornw -*! Initial revision -*! -*! Revision 1.1.1.1 1999/12/03 14:57:31 bjornw -*! * Initial version of arch/cris, the latest CRIS architecture with an MMU. -*! Mostly copied from arch/etrax100 with appropriate renames of files. -*! The mm/ subdir is copied from arch/i386. -*! This does not compile yet at all. -*! -*! -*! Revision 1.4 1999/07/22 17:25:25 bjornw -*! Dont wait for + in putpacket if we havent hit the initial breakpoint yet. Added a kgdb_init function which sets up the break and irq vectors. -*! -*! Revision 1.3 1999/07/21 19:51:18 bjornw -*! Check if the interrupting char is a ctrl-C, ignore otherwise. -*! -*! Revision 1.2 1999/07/21 18:09:39 bjornw -*! Ported to eLinux architecture, and added some kgdb documentation. -*! -*! *!--------------------------------------------------------------------------- *! -*! $Id: kgdb.c,v 1.6 2005/01/14 10:12:17 starvik Exp $ -*! *! (C) Copyright 1999, Axis Communications AB, LUND, SWEDEN *! *!**************************************************************************/ diff --git a/arch/cris/arch-v10/kernel/process.c b/arch/cris/arch-v10/kernel/process.c index 1a3760c94f85..53117f07cc1a 100644 --- a/arch/cris/arch-v10/kernel/process.c +++ b/arch/cris/arch-v10/kernel/process.c @@ -1,5 +1,4 @@ -/* $Id: process.c,v 1.12 2004/12/27 11:18:32 starvik Exp $ - * +/* * linux/arch/cris/kernel/process.c * * Copyright (C) 1995 Linus Torvalds diff --git a/arch/cris/arch-v10/kernel/ptrace.c b/arch/cris/arch-v10/kernel/ptrace.c index b570ae9b6cad..ee505b2eb4db 100644 --- a/arch/cris/arch-v10/kernel/ptrace.c +++ b/arch/cris/arch-v10/kernel/ptrace.c @@ -65,6 +65,7 @@ void ptrace_disable(struct task_struct *child) { /* Todo - pending singlesteps? */ + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); } /* diff --git a/arch/cris/arch-v10/kernel/shadows.c b/arch/cris/arch-v10/kernel/shadows.c index 326178aef6ee..2454a0b02f54 100644 --- a/arch/cris/arch-v10/kernel/shadows.c +++ b/arch/cris/arch-v10/kernel/shadows.c @@ -1,5 +1,4 @@ -/* $Id: shadows.c,v 1.2 2004/12/13 12:21:51 starvik Exp $ - * +/* * Various shadow registers. Defines for these are in include/asm-etrax100/io.h */ diff --git a/arch/cris/arch-v10/kernel/traps.c b/arch/cris/arch-v10/kernel/traps.c index 4becc1bcced9..9eada5d8893b 100644 --- a/arch/cris/arch-v10/kernel/traps.c +++ b/arch/cris/arch-v10/kernel/traps.c @@ -1,13 +1,10 @@ -/* $Id: traps.c,v 1.4 2005/04/24 18:47:55 starvik Exp $ +/* + * Helper functions for trap handlers * - * linux/arch/cris/arch-v10/traps.c + * Copyright (C) 2000-2007, Axis Communications AB. * - * Heler functions for trap handlers - * - * Copyright (C) 2000-2002 Axis Communications AB - * - * Authors: Bjorn Wesen - * Hans-Peter Nilsson + * Authors: Bjorn Wesen + * Hans-Peter Nilsson * */ @@ -15,124 +12,119 @@ #include <asm/uaccess.h> #include <asm/arch/sv_addr_ag.h> -extern int raw_printk(const char *fmt, ...); - -void -show_registers(struct pt_regs * regs) +void +show_registers(struct pt_regs *regs) { - /* We either use rdusp() - the USP register, which might not - correspond to the current process for all cases we're called, - or we use the current->thread.usp, which is not up to date for - the current process. Experience shows we want the USP - register. */ + /* + * It's possible to use either the USP register or current->thread.usp. + * USP might not correspond to the current process for all cases this + * function is called, and current->thread.usp isn't up to date for the + * current process. Experience shows that using USP is the way to go. + */ unsigned long usp = rdusp(); - raw_printk("IRP: %08lx SRP: %08lx DCCR: %08lx USP: %08lx MOF: %08lx\n", - regs->irp, regs->srp, regs->dccr, usp, regs->mof ); - raw_printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n", + printk("IRP: %08lx SRP: %08lx DCCR: %08lx USP: %08lx MOF: %08lx\n", + regs->irp, regs->srp, regs->dccr, usp, regs->mof); + + printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n", regs->r0, regs->r1, regs->r2, regs->r3); - raw_printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n", + + printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n", regs->r4, regs->r5, regs->r6, regs->r7); - raw_printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n", + + printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n", regs->r8, regs->r9, regs->r10, regs->r11); - raw_printk("r12: %08lx r13: %08lx oR10: %08lx sp: %08lx\n", - regs->r12, regs->r13, regs->orig_r10, regs); - raw_printk("R_MMU_CAUSE: %08lx\n", (unsigned long)*R_MMU_CAUSE); - raw_printk("Process %s (pid: %d, stackpage=%08lx)\n", + + printk("r12: %08lx r13: %08lx oR10: %08lx sp: %08lx\n", + regs->r12, regs->r13, regs->orig_r10, (long unsigned)regs); + + printk("R_MMU_CAUSE: %08lx\n", (unsigned long)*R_MMU_CAUSE); + + printk("Process %s (pid: %d, stackpage=%08lx)\n", current->comm, current->pid, (unsigned long)current); /* - * When in-kernel, we also print out the stack and code at the - * time of the fault.. - */ - if (! user_mode(regs)) { - int i; + * When in-kernel, we also print out the stack and code at the + * time of the fault.. + */ + if (!user_mode(regs)) { + int i; - show_stack(NULL, (unsigned long*)usp); + show_stack(NULL, (unsigned long *)usp); - /* Dump kernel stack if the previous dump wasn't one. */ + /* + * If the previous stack-dump wasn't a kernel one, dump the + * kernel stack now. + */ if (usp != 0) - show_stack (NULL, NULL); - - raw_printk("\nCode: "); - if(regs->irp < PAGE_OFFSET) - goto bad; - - /* Often enough the value at regs->irp does not point to - the interesting instruction, which is most often the - _previous_ instruction. So we dump at an offset large - enough that instruction decoding should be in sync at - the interesting point, but small enough to fit on a row - (sort of). We point out the regs->irp location in a - ksymoops-friendly way by wrapping the byte for that - address in parentheses. */ - for(i = -12; i < 12; i++) - { - unsigned char c; - if(__get_user(c, &((unsigned char*)regs->irp)[i])) { -bad: - raw_printk(" Bad IP value."); - break; - } + show_stack(NULL, NULL); + + printk("\nCode: "); + + if (regs->irp < PAGE_OFFSET) + goto bad_value; + + /* + * Quite often the value at regs->irp doesn't point to the + * interesting instruction, which often is the previous + * instruction. So dump at an offset large enough that the + * instruction decoding should be in sync at the interesting + * point, but small enough to fit on a row. The regs->irp + * location is pointed out in a ksymoops-friendly way by + * wrapping the byte for that address in parenthesises. + */ + for (i = -12; i < 12; i++) { + unsigned char c; + + if (__get_user(c, &((unsigned char *)regs->irp)[i])) { +bad_value: + printk(" Bad IP value."); + break; + } if (i == 0) - raw_printk("(%02x) ", c); + printk("(%02x) ", c); else - raw_printk("%02x ", c); - } - raw_printk("\n"); - } + printk("%02x ", c); + } + printk("\n"); + } } -/* Called from entry.S when the watchdog has bitten - * We print out something resembling an oops dump, and if - * we have the nice doggy development flag set, we halt here - * instead of rebooting. - */ - -extern void reset_watchdog(void); -extern void stop_watchdog(void); - - void -watchdog_bite_hook(struct pt_regs *regs) +arch_enable_nmi(void) { -#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY - local_irq_disable(); - stop_watchdog(); - show_registers(regs); - while(1) /* nothing */; -#else - show_registers(regs); -#endif + asm volatile ("setf m"); } -/* This is normally the 'Oops' routine */ -void -die_if_kernel(const char * str, struct pt_regs * regs, long err) +extern void (*nmi_handler)(struct pt_regs *); +void handle_nmi(struct pt_regs *regs) { - if(user_mode(regs)) - return; - -#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY - /* This printout might take too long and trigger the - * watchdog normally. If we're in the nice doggy - * development mode, stop the watchdog during printout. - */ - stop_watchdog(); -#endif - - raw_printk("%s: %04lx\n", str, err & 0xffff); - - show_registers(regs); - -#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY - reset_watchdog(); -#endif - do_exit(SIGSEGV); + if (nmi_handler) + nmi_handler(regs); + + /* Wait until nmi is no longer active. (We enable NMI immediately after + returning from this function, and we don't want it happening while + exiting from the NMI interrupt handler.) */ + while (*R_IRQ_MASK0_RD & IO_STATE(R_IRQ_MASK0_RD, nmi_pin, active)) + ; } -void arch_enable_nmi(void) +#ifdef CONFIG_DEBUG_BUGVERBOSE +void +handle_BUG(struct pt_regs *regs) { - asm volatile("setf m"); + struct bug_frame f; + unsigned char c; + unsigned long irp = regs->irp; + + if (__copy_from_user(&f, (const void __user *)(irp - 8), sizeof f)) + return; + if (f.prefix != BUG_PREFIX || f.magic != BUG_MAGIC) + return; + if (__get_user(c, f.filename)) + f.filename = "<bad filename>"; + + printk("kernel BUG at %s:%d!\n", f.filename, f.line); } +#endif diff --git a/arch/cris/arch-v10/lib/checksum.S b/arch/cris/arch-v10/lib/checksum.S index 85c48f0a9ec2..7d552f4bd5ae 100644 --- a/arch/cris/arch-v10/lib/checksum.S +++ b/arch/cris/arch-v10/lib/checksum.S @@ -1,4 +1,4 @@ -/* $Id: checksum.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $ +/* * A fast checksum routine using movem * Copyright (c) 1998-2001 Axis Communications AB * @@ -61,8 +61,6 @@ _mloop: movem [$r10+],$r9 ; read 10 longwords ax addq 0,$r12 - ax ; do it again, since we might have generated a carry - addq 0,$r12 subq 10*4,$r11 bge _mloop @@ -88,10 +86,6 @@ _word_loop: lsrq 16,$r13 ; r13 = checksum >> 16 and.d $r9,$r12 ; checksum = checksum & 0xffff add.d $r13,$r12 ; checksum += r13 - move.d $r12,$r13 ; do the same again, maybe we got a carry last add - lsrq 16,$r13 - and.d $r9,$r12 - add.d $r13,$r12 _no_fold: cmpq 2,$r11 diff --git a/arch/cris/arch-v10/lib/checksumcopy.S b/arch/cris/arch-v10/lib/checksumcopy.S index 35cbffb306fd..540db8a5f849 100644 --- a/arch/cris/arch-v10/lib/checksumcopy.S +++ b/arch/cris/arch-v10/lib/checksumcopy.S @@ -1,4 +1,4 @@ -/* $Id: checksumcopy.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $ +/* * A fast checksum+copy routine using movem * Copyright (c) 1998, 2001 Axis Communications AB * @@ -67,8 +67,6 @@ _mloop: movem [$r10+],$r9 ; read 10 longwords ax addq 0,$r13 - ax ; do it again, since we might have generated a carry - addq 0,$r13 subq 10*4,$r12 bge _mloop @@ -91,10 +89,6 @@ _word_loop: lsrq 16,$r9 ; r0 = checksum >> 16 and.d 0xffff,$r13 ; checksum = checksum & 0xffff add.d $r9,$r13 ; checksum += r0 - move.d $r13,$r9 ; do the same again, maybe we got a carry last add - lsrq 16,$r9 - and.d 0xffff,$r13 - add.d $r9,$r13 _no_fold: cmpq 2,$r12 diff --git a/arch/cris/arch-v10/lib/dram_init.S b/arch/cris/arch-v10/lib/dram_init.S index 6a6bdfd6984d..b9190ff7d0a4 100644 --- a/arch/cris/arch-v10/lib/dram_init.S +++ b/arch/cris/arch-v10/lib/dram_init.S @@ -1,5 +1,4 @@ -/* $Id: dram_init.S,v 1.4 2003/09/22 09:21:59 starvik Exp $ - * +/* * DRAM/SDRAM initialization - alter with care * This file is intended to be included from other assembler files * @@ -8,60 +7,7 @@ * * Copyright (C) 2000, 2001 Axis Communications AB * - * Authors: Mikael Starvik (starvik@axis.com) - * - * $Log: dram_init.S,v $ - * Revision 1.4 2003/09/22 09:21:59 starvik - * Decompresser is linked to 0x407xxxxx and sdram commands are at 0x000xxxxx - * so we need to mask off 12 bits. - * - * Revision 1.3 2003/03/31 09:38:37 starvik - * Corrected calculation of end of sdram init commands - * - * Revision 1.2 2002/11/19 13:33:29 starvik - * Changes from Linux 2.4 - * - * Revision 1.13 2002/10/30 07:42:28 starvik - * Always read SDRAM command sequence from flash - * - * Revision 1.12 2002/08/09 11:37:37 orjanf - * Added double initialization work-around for Samsung SDRAMs. - * - * Revision 1.11 2002/06/04 11:43:21 starvik - * Check if mrs_data is specified in kernelconfig (necessary for MCM) - * - * Revision 1.10 2001/10/04 12:00:21 martinnn - * Added missing underscores. - * - * Revision 1.9 2001/10/01 14:47:35 bjornw - * Added register prefixes and removed underscores - * - * Revision 1.8 2001/05/15 07:12:45 hp - * Copy warning from head.S about r8 and r9 - * - * Revision 1.7 2001/04/18 12:05:39 bjornw - * Fixed comments, and explicitly include config.h to be sure its there - * - * Revision 1.6 2001/04/10 06:20:16 starvik - * Delay should be 200us, not 200ns - * - * Revision 1.5 2001/04/09 06:01:13 starvik - * Added support for 100 MHz SDRAMs - * - * Revision 1.4 2001/03/26 14:24:01 bjornw - * Namechange of some config options - * - * Revision 1.3 2001/03/23 08:29:41 starvik - * Corrected calculation of mrs_data - * - * Revision 1.2 2001/02/08 15:20:00 starvik - * Corrected SDRAM initialization - * Should now be included as inline - * - * Revision 1.1 2001/01/29 13:08:02 starvik - * Initial version - * This file should be included from all assembler files that needs to - * initialize DRAM/SDRAM. + * Authors: Mikael Starvik (starvik@axis.com) * */ diff --git a/arch/cris/arch-v10/lib/old_checksum.c b/arch/cris/arch-v10/lib/old_checksum.c index 497634a64829..1734b467efa6 100644 --- a/arch/cris/arch-v10/lib/old_checksum.c +++ b/arch/cris/arch-v10/lib/old_checksum.c @@ -1,5 +1,4 @@ -/* $Id: old_checksum.c,v 1.3 2003/10/27 08:04:32 starvik Exp $ - * +/* * INET An implementation of the TCP/IP protocol suite for the LINUX * operating system. INET is implemented using the BSD Socket * interface as the means of communication with the user level. diff --git a/arch/cris/arch-v10/mm/fault.c b/arch/cris/arch-v10/mm/fault.c index fe2615022b97..65504fd80928 100644 --- a/arch/cris/arch-v10/mm/fault.c +++ b/arch/cris/arch-v10/mm/fault.c @@ -4,10 +4,10 @@ * Low level bus fault handler * * - * Copyright (C) 2000, 2001 Axis Communications AB + * Copyright (C) 2000-2007 Axis Communications AB + * + * Authors: Bjorn Wesen * - * Authors: Bjorn Wesen - * */ #include <linux/mm.h> @@ -60,7 +60,7 @@ handle_mmu_bus_fault(struct pt_regs *regs) #ifdef DEBUG page_id = IO_EXTRACT(R_MMU_CAUSE, page_id, cause); acc = IO_EXTRACT(R_MMU_CAUSE, acc_excp, cause); - inv = IO_EXTRACT(R_MMU_CAUSE, inv_excp, cause); + inv = IO_EXTRACT(R_MMU_CAUSE, inv_excp, cause); index = IO_EXTRACT(R_TLB_SELECT, index, select); #endif miss = IO_EXTRACT(R_MMU_CAUSE, miss_excp, cause); @@ -84,12 +84,13 @@ handle_mmu_bus_fault(struct pt_regs *regs) local_irq_disable(); pmd = (pmd_t *)(pgd + pgd_index(address)); if (pmd_none(*pmd)) - return; + goto exit; pte = *pte_offset_kernel(pmd, address); if (!pte_present(pte)) - return; + goto exit; *R_TLB_SELECT = select; *R_TLB_HI = cause; *R_TLB_LO = pte_val(pte); +exit: local_irq_restore(flags); } diff --git a/arch/cris/arch-v10/mm/tlb.c b/arch/cris/arch-v10/mm/tlb.c index 7d9fec88dee5..6baf5bd209e7 100644 --- a/arch/cris/arch-v10/mm/tlb.c +++ b/arch/cris/arch-v10/mm/tlb.c @@ -4,8 +4,8 @@ * Low level TLB handling * * - * Copyright (C) 2000-2002 Axis Communications AB - * + * Copyright (C) 2000-2007 Axis Communications AB + * * Authors: Bjorn Wesen (bjornw@axis.com) * */ @@ -39,7 +39,7 @@ flush_tlb_all(void) unsigned long flags; /* the vpn of i & 0xf is so we dont write similar TLB entries - * in the same 4-way entry group. details.. + * in the same 4-way entry group. details... */ local_irq_save(flags); @@ -47,7 +47,7 @@ flush_tlb_all(void) *R_TLB_SELECT = ( IO_FIELD(R_TLB_SELECT, index, i) ); *R_TLB_HI = ( IO_FIELD(R_TLB_HI, page_id, INVALID_PAGEID ) | IO_FIELD(R_TLB_HI, vpn, i & 0xf ) ); - + *R_TLB_LO = ( IO_STATE(R_TLB_LO, global,no ) | IO_STATE(R_TLB_LO, valid, no ) | IO_STATE(R_TLB_LO, kernel,no ) | @@ -71,10 +71,10 @@ flush_tlb_mm(struct mm_struct *mm) if(page_id == NO_CONTEXT) return; - + /* mark the TLB entries that match the page_id as invalid. * here we could also check the _PAGE_GLOBAL bit and NOT flush - * global pages. is it worth the extra I/O ? + * global pages. is it worth the extra I/O ? */ local_irq_save(flags); @@ -83,7 +83,7 @@ flush_tlb_mm(struct mm_struct *mm) if (IO_EXTRACT(R_TLB_HI, page_id, *R_TLB_HI) == page_id) { *R_TLB_HI = ( IO_FIELD(R_TLB_HI, page_id, INVALID_PAGEID ) | IO_FIELD(R_TLB_HI, vpn, i & 0xf ) ); - + *R_TLB_LO = ( IO_STATE(R_TLB_LO, global,no ) | IO_STATE(R_TLB_LO, valid, no ) | IO_STATE(R_TLB_LO, kernel,no ) | @@ -96,9 +96,7 @@ flush_tlb_mm(struct mm_struct *mm) /* invalidate a single page */ -void -flush_tlb_page(struct vm_area_struct *vma, - unsigned long addr) +void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr) { struct mm_struct *mm = vma->vm_mm; int page_id = mm->context.page_id; @@ -113,7 +111,7 @@ flush_tlb_page(struct vm_area_struct *vma, addr &= PAGE_MASK; /* perhaps not necessary */ /* invalidate those TLB entries that match both the mm context - * and the virtual address requested + * and the virtual address requested */ local_irq_save(flags); @@ -125,7 +123,7 @@ flush_tlb_page(struct vm_area_struct *vma, (tlb_hi & PAGE_MASK) == addr) { *R_TLB_HI = IO_FIELD(R_TLB_HI, page_id, INVALID_PAGEID ) | addr; /* same addr as before works. */ - + *R_TLB_LO = ( IO_STATE(R_TLB_LO, global,no ) | IO_STATE(R_TLB_LO, valid, no ) | IO_STATE(R_TLB_LO, kernel,no ) | @@ -144,7 +142,7 @@ dump_tlb_all(void) { int i; unsigned long flags; - + printk("TLB dump. LO is: pfn | reserved | global | valid | kernel | we |\n"); local_save_flags(flags); @@ -172,27 +170,29 @@ init_new_context(struct task_struct *tsk, struct mm_struct *mm) /* called in schedule() just before actually doing the switch_to */ -void -switch_mm(struct mm_struct *prev, struct mm_struct *next, - struct task_struct *tsk) +void switch_mm(struct mm_struct *prev, struct mm_struct *next, + struct task_struct *tsk) { - /* make sure we have a context */ + if (prev != next) { + /* make sure we have a context */ + get_mmu_context(next); - get_mmu_context(next); + /* remember the pgd for the fault handlers + * this is similar to the pgd register in some other CPU's. + * we need our own copy of it because current and active_mm + * might be invalid at points where we still need to derefer + * the pgd. + */ - /* remember the pgd for the fault handlers - * this is similar to the pgd register in some other CPU's. - * we need our own copy of it because current and active_mm - * might be invalid at points where we still need to derefer - * the pgd. - */ + per_cpu(current_pgd, smp_processor_id()) = next->pgd; - per_cpu(current_pgd, smp_processor_id()) = next->pgd; + /* switch context in the MMU */ - /* switch context in the MMU */ - - D(printk("switching mmu_context to %d (%p)\n", next->context, next)); + D(printk(KERN_DEBUG "switching mmu_context to %d (%p)\n", + next->context, next)); - *R_MMU_CONTEXT = IO_FIELD(R_MMU_CONTEXT, page_id, next->context.page_id); + *R_MMU_CONTEXT = IO_FIELD(R_MMU_CONTEXT, + page_id, next->context.page_id); + } } diff --git a/arch/cris/arch-v32/Kconfig b/arch/cris/arch-v32/Kconfig index d8acaa920e1c..005ed2b3f7f4 100644 --- a/arch/cris/arch-v32/Kconfig +++ b/arch/cris/arch-v32/Kconfig @@ -1,27 +1,73 @@ if ETRAX_ARCH_V32 +source arch/cris/arch-v32/mach-fs/Kconfig +source arch/cris/arch-v32/mach-a3/Kconfig + +source drivers/cpufreq/Kconfig + config ETRAX_DRAM_VIRTUAL_BASE hex depends on ETRAX_ARCH_V32 default "c0000000" -config ETRAX_LED1G - string "First green LED bit" +choice + prompt "Nbr of Ethernet LED groups" depends on ETRAX_ARCH_V32 + default ETRAX_NBR_LED_GRP_ONE + help + Select how many Ethernet LED groups that can be used. Usually one per Ethernet + interface is a good choice. + +config ETRAX_NBR_LED_GRP_ZERO + bool "Use zero LED groups" + help + Select this if you do not want any Ethernet LEDs. + +config ETRAX_NBR_LED_GRP_ONE + bool "Use one LED group" + help + Select this if you want one Ethernet LED group. This LED group + can be used for one or more Ethernet interfaces. However, it is + recomended that each Ethernet interface use a dedicated LED group. + +config ETRAX_NBR_LED_GRP_TWO + bool "Use two LED groups" + help + Select this if you want two Ethernet LED groups. This is the + best choice if you have more than one Ethernet interface and + would like to have separate LEDs for the interfaces. + +endchoice + +config ETRAX_LED_G_NET0 + string "Ethernet LED group 0 green LED bit" + depends on ETRAX_ARCH_V32 && (ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO) default "PA3" help - Bit to use for the first green LED (network LED). - Most Axis products use bit A3 here. + Bit to use for the green LED in Ethernet LED group 0. -config ETRAX_LED1R - string "First red LED bit" - depends on ETRAX_ARCH_V32 +config ETRAX_LED_R_NET0 + string "Ethernet LED group 0 red LED bit" + depends on ETRAX_ARCH_V32 && (ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO) default "PA4" help - Bit to use for the first red LED (network LED). - Most Axis products use bit A4 here. + Bit to use for the red LED in Ethernet LED group 0. -config ETRAX_LED2G +config ETRAX_LED_G_NET1 + string "Ethernet group 1 green LED bit" + depends on ETRAX_ARCH_V32 && ETRAX_NBR_LED_GRP_TWO + default "" + help + Bit to use for the green LED in Ethernet LED group 1. + +config ETRAX_LED_R_NET1 + string "Ethernet group 1 red LED bit" + depends on ETRAX_ARCH_V32 && ETRAX_NBR_LED_GRP_TWO + default "" + help + Bit to use for the red LED in Ethernet LED group 1. + +config ETRAX_V32_LED2G string "Second green LED bit" depends on ETRAX_ARCH_V32 default "PA5" @@ -29,7 +75,7 @@ config ETRAX_LED2G Bit to use for the first green LED (status LED). Most Axis products use bit A5 here. -config ETRAX_LED2R +config ETRAX_V32_LED2R string "Second red LED bit" depends on ETRAX_ARCH_V32 default "PA6" @@ -37,7 +83,7 @@ config ETRAX_LED2R Bit to use for the first red LED (network LED). Most Axis products use bit A6 here. -config ETRAX_LED3G +config ETRAX_V32_LED3G string "Third green LED bit" depends on ETRAX_ARCH_V32 default "PA7" @@ -45,7 +91,7 @@ config ETRAX_LED3G Bit to use for the first green LED (drive/power LED). Most Axis products use bit A7 here. -config ETRAX_LED3R +config ETRAX_V32_LED3R string "Third red LED bit" depends on ETRAX_ARCH_V32 default "PA7" @@ -54,39 +100,6 @@ config ETRAX_LED3R Most Axis products use bit A7 here. choice - prompt "Product debug-port" - depends on ETRAX_ARCH_V32 - default ETRAX_DEBUG_PORT0 - -config ETRAX_DEBUG_PORT0 - bool "Serial-0" - help - Choose a serial port for the ETRAX debug console. Default to - port 0. - -config ETRAX_DEBUG_PORT1 - bool "Serial-1" - help - Use serial port 1 for the console. - -config ETRAX_DEBUG_PORT2 - bool "Serial-2" - help - Use serial port 2 for the console. - -config ETRAX_DEBUG_PORT3 - bool "Serial-3" - help - Use serial port 3 for the console. - -config ETRAX_DEBUG_PORT_NULL - bool "disabled" - help - Disable serial-port debugging. - -endchoice - -choice prompt "Kernel GDB port" depends on ETRAX_KGDB default ETRAX_KGDB_PORT0 @@ -95,25 +108,11 @@ choice not be enabled under Drivers for built-in interfaces (as it has its own initialization code) and should not be the same as the debug port. -config ETRAX_KGDB_PORT0 - bool "Serial-0" - help - Use serial port 0 for kernel debugging. - -config ETRAX_KGDB_PORT1 - bool "Serial-1" - help - Use serial port 1 for kernel debugging. - -config ETRAX_KGDB_PORT2 - bool "Serial-2" - help - Use serial port 2 for kernel debugging. - -config ETRAX_KGDB_PORT3 - bool "Serial-3" +config ETRAX_KGDB_PORT4 + bool "Serial-4" + depends on ETRAX_SERIAL_PORTS = 5 help - Use serial port 3 for kernel debugging. + Use serial port 4 for kernel debugging. endchoice diff --git a/arch/cris/arch-v32/boot/Makefile b/arch/cris/arch-v32/boot/Makefile index 26f293ab9617..3f91349c5f12 100644 --- a/arch/cris/arch-v32/boot/Makefile +++ b/arch/cris/arch-v32/boot/Makefile @@ -1,14 +1,21 @@ # # arch/cris/arch-v32/boot/Makefile # -target = $(target_boot_dir) -src = $(src_boot_dir) -zImage: compressed/vmlinuz +OBJCOPY = objcopy-cris +OBJCOPYFLAGS = -O binary -R .note -R .comment -compressed/vmlinuz: $(objtree)/vmlinux - @$(MAKE) -f $(src)/compressed/Makefile $(objtree)/vmlinuz +subdir- := compressed rescue +targets := Image -clean: - rm -f zImage tools/build compressed/vmlinux.out - @$(MAKE) -f $(src)/compressed/Makefile clean +$(obj)/Image: vmlinux FORCE + $(call if_changed,objcopy) + @echo ' Kernel: $@ is ready' + +$(obj)/compressed/vmlinux: $(obj)/Image FORCE + $(Q)$(MAKE) $(build)=$(obj)/compressed $@ + $(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin + +$(obj)/zImage: $(obj)/compressed/vmlinux + @cp $< $@ + @echo ' Kernel: $@ is ready' diff --git a/arch/cris/arch-v32/boot/compressed/Makefile b/arch/cris/arch-v32/boot/compressed/Makefile index 609692f9d5eb..2c8c2c3039c5 100644 --- a/arch/cris/arch-v32/boot/compressed/Makefile +++ b/arch/cris/arch-v32/boot/compressed/Makefile @@ -1,41 +1,30 @@ # -# lx25/arch/cris/arch-v32/boot/compressed/Makefile +# arch/cris/arch-v32/boot/compressed/Makefile # -# create a compressed vmlinux image from the original vmlinux files and romfs -# - -target = $(target_compressed_dir) -src = $(src_compressed_dir) CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE) -CFLAGS = -O2 +asflags-y += -I $(srctree)/include/asm/mach/ -I $(srctree)/include/asm/arch +ccflags-y += -O2 -I $(srctree)/include/asm/mach/ -I $(srctree)/include/asm/arch LD = gcc-cris -mlinux -march=v32 -nostdlib +ldflags-y += -T $(obj)/decompress.ld +obj-y = head.o misc.o +OBJECTS = $(obj)/head.o $(obj)/misc.o OBJCOPY = objcopy-cris OBJCOPYFLAGS = -O binary --remove-section=.bss -OBJECTS = $(target)/head.o $(target)/misc.o - -# files to compress -SYSTEM = $(objtree)/vmlinux.bin - -all: vmlinuz - -$(target)/decompress.bin: $(OBJECTS) - $(LD) -T $(src)/decompress.ld -o $(target)/decompress.o $(OBJECTS) - $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/decompress.o $(target)/decompress.bin -$(objtree)/vmlinuz: $(target) piggy.img $(target)/decompress.bin - cat $(target)/decompress.bin piggy.img > $(objtree)/vmlinuz - rm -f piggy.img - cp $(objtree)/vmlinuz $(src) +quiet_cmd_image = BUILD $@ +cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@ -$(target)/head.o: $(src)/head.S - $(CC) -D__ASSEMBLY__ -c $< -o $@ +targets := vmlinux piggy.gz decompress.o decompress.bin -# gzip the kernel image +$(obj)/decompress.o: $(OBJECTS) FORCE + $(call if_changed,ld) -piggy.img: $(SYSTEM) - cat $(SYSTEM) | gzip -f -9 > piggy.img +$(obj)/decompress.bin: $(obj)/decompress.o FORCE + $(call if_changed,objcopy) -clean: - rm -f piggy.img $(objtree)/vmlinuz vmlinuz.o decompress.o decompress.bin $(OBJECTS) +$(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE + $(call if_changed,image) +$(obj)/piggy.gz: $(obj)/../Image FORCE + $(call if_changed,gzip) diff --git a/arch/cris/arch-v32/boot/compressed/README b/arch/cris/arch-v32/boot/compressed/README index e33691d15c57..182c5d75784b 100644 --- a/arch/cris/arch-v32/boot/compressed/README +++ b/arch/cris/arch-v32/boot/compressed/README @@ -1,6 +1,5 @@ Creation of the self-extracting compressed kernel image (vmlinuz) ----------------------------------------------------------------- -$Id: README,v 1.1 2003/08/21 09:37:03 johana Exp $ This can be slightly confusing because it's a process with many steps. diff --git a/arch/cris/arch-v32/boot/compressed/head.S b/arch/cris/arch-v32/boot/compressed/head.S index 34cea10a8998..f86208caf32d 100644 --- a/arch/cris/arch-v32/boot/compressed/head.S +++ b/arch/cris/arch-v32/boot/compressed/head.S @@ -2,13 +2,12 @@ * Code that sets up the DRAM registers, calls the * decompressor to unpack the piggybacked kernel, and jumps. * - * Copyright (C) 1999 - 2003, Axis Communications AB + * Copyright (C) 1999 - 2006, Axis Communications AB */ #define ASSEMBLER_MACROS_ONLY -#include <asm/arch/hwregs/asm/reg_map_asm.h> -#include <asm/arch/hwregs/asm/gio_defs_asm.h> -#include <asm/arch/hwregs/asm/config_defs_asm.h> +#include <hwregs/asm/reg_map_asm.h> +#include <asm/arch/mach/startup.inc> #define RAM_INIT_MAGIC 0x56902387 #define COMMAND_LINE_MAGIC 0x87109563 @@ -22,114 +21,49 @@ start: di ;; Start clocks for used blocks. - move.d REG_ADDR(config, regi_config, rw_clk_ctrl), $r1 - move.d [$r1], $r0 - or.d REG_STATE(config, rw_clk_ctrl, cpu, yes) | \ - REG_STATE(config, rw_clk_ctrl, bif, yes) | \ - REG_STATE(config, rw_clk_ctrl, fix_io, yes), $r0 - move.d $r0, [$r1] - - ;; If booting from NAND flash we first have to copy some - ;; data from NAND flash to internal RAM to get the code - ;; that initializes the SDRAM. Lets copy 20 KB. This - ;; code executes at 0x38010000 if booting from NAND and - ;; we are guaranted that at least 0x200 bytes are good so - ;; lets start from there. The first 8192 bytes in the nand - ;; flash is spliced with zeroes and is thus 16384 bytes. - move.d 0x38010200, $r10 - move.d 0x14200, $r11 ; Start offset in NAND flash 0x10200 + 16384 - move.d 0x5000, $r12 ; Length of copy - - ;; Before this code the tools add a partitiontable so the PC - ;; has an offset from the linked address. -offset1: - lapcq ., $r13 ; get PC - add.d first_copy_complete-offset1, $r13 - -#include "../../lib/nand_init.S" - -first_copy_complete: - ;; Initialze the DRAM registers. + START_CLOCKS + + ;; Initialize the DRAM registers. cmp.d RAM_INIT_MAGIC, $r8 ; Already initialized? beq dram_init_finished nop -#include "../../lib/dram_init.S" +#include "../../mach/dram_init.S" dram_init_finished: - lapcq ., $r13 ; get PC - add.d second_copy_complete-dram_init_finished, $r13 - - move.d REG_ADDR(config, regi_config, r_bootsel), $r0 - move.d [$r0], $r0 - and.d REG_MASK(config, r_bootsel, boot_mode), $r0 - cmp.d REG_STATE(config, r_bootsel, boot_mode, nand), $r0 - bne second_copy_complete ; No NAND boot - nop - - ;; Copy 2MB from NAND flash to SDRAM (at 2-4MB into the SDRAM) - move.d 0x40204000, $r10 - move.d 0x8000, $r11 - move.d 0x200000, $r12 - ba copy_nand_to_ram - nop -second_copy_complete: - - ;; Initiate the PA port. - move.d CONFIG_ETRAX_DEF_GIO_PA_OUT, $r0 - move.d REG_ADDR(gio, regi_gio, rw_pa_dout), $r1 - move.d $r0, [$r1] - - move.d CONFIG_ETRAX_DEF_GIO_PA_OE, $r0 - move.d REG_ADDR(gio, regi_gio, rw_pa_oe), $r1 - move.d $r0, [$r1] + GIO_INIT ;; Setup the stack to a suitably high address. ;; We assume 8 MB is the minimum DRAM and put ;; the SP at the top for now. move.d 0x40800000, $sp - ;; Figure out where the compressed piggyback image is - ;; in the flash (since we wont try to copy it to DRAM - ;; before unpacking). It is at _edata, but in flash. + ;; Figure out where the compressed piggyback image is. + ;; It is either in [NOR] flash (we don't want to copy it + ;; to DRAM before unpacking), or copied to DRAM + ;; by the [NAND] flash boot loader. + ;; The piggyback image is at _edata, but relative to where the + ;; image is actually located in memory, not where it is linked + ;; (the decompressor is linked at 0x40700000+ and runs there). ;; Use (_edata - herami) as offset to the current PC. - move.d REG_ADDR(config, regi_config, r_bootsel), $r0 - move.d [$r0], $r0 - and.d REG_MASK(config, r_bootsel, boot_mode), $r0 - cmp.d REG_STATE(config, r_bootsel, boot_mode, nand), $r0 - beq hereami2 - nop hereami: lapcq ., $r5 ; get PC and.d 0x7fffffff, $r5 ; strip any non-cache bit - move.d $r5, $r0 ; save for later - flash address of 'herami' + move.d $r5, $r0 ; source address of 'herami' add.d _edata, $r5 sub.d hereami, $r5 ; r5 = flash address of '_edata' move.d hereami, $r1 ; destination - ba 2f - nop -hereami2: - lapcq ., $r5 ; get PC - and.d 0x00ffffff, $r5 ; strip any non-cache bit - move.d $r5, $r6 - or.d 0x40200000, $r6 - move.d $r6, $r0 ; save for later - flash address of 'herami' - add.d _edata, $r5 - sub.d hereami2, $r5 ; r5 = flash address of '_edata' - add.d 0x40200000, $r5 - move.d hereami2, $r1 ; destination -2: + ;; Copy text+data to DRAM move.d _edata, $r2 ; end destination -1: move.w [$r0+], $r3 - move.w $r3, [$r1+] - cmp.d $r2, $r1 +1: move.w [$r0+], $r3 ; from herami+ source + move.w $r3, [$r1+] ; to hereami+ destination (linked address) + cmp.d $r2, $r1 ; finish when destination == _edata bcs 1b nop - move.d input_data, $r0 ; for the decompressor move.d $r5, [$r0] ; for the decompressor @@ -144,16 +78,24 @@ hereami2: nop ;; Save command line magic and address. - move.d _cmd_line_magic, $r12 - move.d $r10, [$r12] - move.d _cmd_line_addr, $r12 - move.d $r11, [$r12] + move.d _cmd_line_magic, $r0 + move.d $r10, [$r0] + move.d _cmd_line_addr, $r0 + move.d $r11, [$r0] + + ;; Save boot source indicator + move.d _boot_source, $r0 + move.d $r12, [$r0] ;; Do the decompression and save compressed size in _inptr jsr decompress_kernel nop + ;; Restore boot source indicator + move.d _boot_source, $r12 + move.d [$r12], $r12 + ;; Restore command line magic and address. move.d _cmd_line_magic, $r10 move.d [$r10], $r10 @@ -166,11 +108,10 @@ hereami2: move.d [$r0], $r9 ; flash address of compressed kernel move.d inptr, $r0 add.d [$r0], $r9 ; size of compressed kernel - cmp.d 0x40200000, $r9 - blo enter_kernel - nop - sub.d 0x40200000, $r9 - add.d 0x4000, $r9 + cmp.d 0x40000000, $r9 ; image in DRAM ? + blo enter_kernel ; no, must be [NOR] flash, jump + nop ; delay slot + and.d 0x001fffff, $r9 ; assume compressed kernel was < 2M enter_kernel: ;; Enter the decompressed kernel @@ -186,7 +127,7 @@ _cmd_line_magic: .dword 0 _cmd_line_addr: .dword 0 -is_nand_boot: - .dword 0 +_boot_source: + .dword 0 -#include "../../lib/hw_settings.S" +#include "../../mach/hw_settings.S" diff --git a/arch/cris/arch-v32/boot/compressed/misc.c b/arch/cris/arch-v32/boot/compressed/misc.c index 0169ba1ca9c9..55b2695c5d70 100644 --- a/arch/cris/arch-v32/boot/compressed/misc.c +++ b/arch/cris/arch-v32/boot/compressed/misc.c @@ -1,8 +1,6 @@ /* * misc.c * - * $Id: misc.c,v 1.8 2005/04/24 18:34:29 starvik Exp $ - * * This is a collection of several routines from gzip-1.0.3 * adapted for Linux. * @@ -22,9 +20,13 @@ #include <linux/types.h> -#include <asm/arch/hwregs/reg_rdwr.h> -#include <asm/arch/hwregs/reg_map.h> -#include <asm/arch/hwregs/ser_defs.h> +#include <hwregs/reg_rdwr.h> +#include <hwregs/reg_map.h> +#include <hwregs/ser_defs.h> +#include <hwregs/pinmux_defs.h> +#ifdef CONFIG_CRIS_MACH_ARTPEC3 +#include <hwregs/clkgen_defs.h> +#endif /* * gzip declarations @@ -85,7 +87,6 @@ static unsigned outcnt = 0; /* bytes in output buffer */ # define Tracecv(c,x) #endif -static int fill_inbuf(void); static void flush_window(void); static void error(char *m); static void gzip_mark(void **); @@ -186,6 +187,8 @@ memset(void* s, int c, size_t n) char *ss = (char*)s; for (i=0;i<n;i++) ss[i] = c; + + return s; } void* @@ -196,6 +199,8 @@ memcpy(void* __dest, __const void* __src, char *d = (char *)__dest, *s = (char *)__src; for (i=0;i<__n;i++) d[i] = s[i]; + + return __dest; } /* =========================================================================== @@ -225,15 +230,15 @@ flush_window() static void error(char *x) { - puts("\n\n"); + puts("\r\n\n"); puts(x); - puts("\n\n -- System halted\n"); + puts("\r\n\n -- System halted\n"); while(1); /* Halt */ } void -setup_normal_output_buffer() +setup_normal_output_buffer(void) { output_data = (char *)KERNEL_LOAD_ADR; } @@ -262,15 +267,17 @@ serial_setup(reg_scope_instances regi_ser) rec_baud = REG_RD(ser, regi_ser, rw_rec_baud_div); tr_ctrl.stop_bits = 1; /* 2 stop bits. */ + tr_ctrl.en = 1; /* enable transmitter */ + rec_ctrl.en = 1; /* enabler receiver */ /* - * The baudrate setup is a bit fishy, but in the end the transceiver is - * set to 4800 and the receiver to 115200. The magic value is - * 29.493 MHz. + * The baudrate setup used to be a bit fishy, but now transmitter and + * receiver are both set to the intended baud rate, 115200. + * The magic value is 29.493 MHz. */ tr_ctrl.base_freq = regk_ser_f29_493; rec_ctrl.base_freq = regk_ser_f29_493; - tr_baud.div = (29493000 / 8) / 4800; + tr_baud.div = (29493000 / 8) / 115200; rec_baud.div = (29493000 / 8) / 115200; REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl); @@ -280,25 +287,52 @@ serial_setup(reg_scope_instances regi_ser) } void -decompress_kernel() +decompress_kernel(void) { char revision; - /* input_data is set in head.S */ - inbuf = input_data; +#if defined(CONFIG_ETRAX_DEBUG_PORT1) || \ + defined(CONFIG_ETRAX_DEBUG_PORT2) || \ + defined(CONFIG_ETRAX_DEBUG_PORT3) + reg_pinmux_rw_hwprot hwprot; + +#ifdef CONFIG_CRIS_MACH_ARTPEC3 + reg_clkgen_rw_clk_ctrl clk_ctrl; + + /* Enable corresponding clock region when serial 1..3 selected */ + + clk_ctrl = REG_RD(clkgen, regi_clkgen, rw_clk_ctrl); + clk_ctrl.sser_ser_dma6_7 = regk_clkgen_yes; + REG_WR(clkgen, regi_clkgen, rw_clk_ctrl, clk_ctrl); +#endif + + /* pinmux setup for ports 1..3 */ + hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot); +#endif #ifdef CONFIG_ETRAX_DEBUG_PORT0 serial_setup(regi_ser0); #endif #ifdef CONFIG_ETRAX_DEBUG_PORT1 + hwprot.ser1 = regk_pinmux_yes; serial_setup(regi_ser1); #endif #ifdef CONFIG_ETRAX_DEBUG_PORT2 + hwprot.ser2 = regk_pinmux_yes; serial_setup(regi_ser2); #endif #ifdef CONFIG_ETRAX_DEBUG_PORT3 + hwprot.ser3 = regk_pinmux_yes; serial_setup(regi_ser3); #endif +#if defined(CONFIG_ETRAX_DEBUG_PORT1) || \ + defined(CONFIG_ETRAX_DEBUG_PORT2) || \ + defined(CONFIG_ETRAX_DEBUG_PORT3) + REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot); +#endif + + /* input_data is set in head.S */ + inbuf = input_data; setup_normal_output_buffer(); @@ -307,11 +341,11 @@ decompress_kernel() __asm__ volatile ("move $vr,%0" : "=rm" (revision)); if (revision < 32) { - puts("You need an ETRAX FS to run Linux 2.6/crisv32.\n"); + puts("You need an ETRAX FS to run Linux 2.6/crisv32.\r\n"); while(1); } - puts("Uncompressing Linux...\n"); + puts("Uncompressing Linux...\r\n"); gunzip(); - puts("Done. Now booting the kernel.\n"); + puts("Done. Now booting the kernel.\r\n"); } diff --git a/arch/cris/arch-v32/boot/rescue/Makefile b/arch/cris/arch-v32/boot/rescue/Makefile index f668a8198724..c0987795dcb7 100644 --- a/arch/cris/arch-v32/boot/rescue/Makefile +++ b/arch/cris/arch-v32/boot/rescue/Makefile @@ -1,36 +1,27 @@ # -# Makefile for rescue code +# Makefile for rescue (bootstrap) code # -target = $(target_rescue_dir) -src = $(src_rescue_dir) CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE) -CFLAGS = -O2 +ccflags-y += -O2 -I $(srctree)/include/asm/arch/mach/ \ + -I $(srctree)/include/asm/arch +asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch LD = gcc-cris -mlinux -march=v32 -nostdlib +ldflags-y += -T $(obj)/rescue.ld +LDPOSTFLAGS = -lgcc OBJCOPY = objcopy-cris OBJCOPYFLAGS = -O binary --remove-section=.bss +obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o +OBJECT := $(obj)/head.o -all: $(target)/rescue.bin +targets := rescue.o rescue.bin -rescue: rescue.bin - # do nothing +quiet_cmd_ldlibgcc = LD $@ +cmd_ldlibgcc = $(LD) $(LDFLAGS) $(filter-out FORCE,$^) $(LDPOSTFLAGS) -o $@ -$(target)/rescue.bin: $(target) $(target)/head.o - $(LD) -T $(src)/rescue.ld -o $(target)/rescue.o $(target)/head.o - $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/rescue.o $(target)/rescue.bin - cp -p $(target)/rescue.bin $(objtree) +$(obj)/rescue.o: $(OBJECTS) FORCE + $(call if_changed,ldlibgcc) -$(target): - mkdir -p $(target) - -$(target)/head.o: $(src)/head.S - $(CC) -D__ASSEMBLY__ -c $< -o $*.o - -clean: - rm -f $(target)/*.o $(target)/*.bin - -fastdep: - -modules: - -modules-install: +$(obj)/rescue.bin: $(obj)/rescue.o FORCE + $(call if_changed,objcopy) + cp -p $(obj)/rescue.bin $(objtree) diff --git a/arch/cris/arch-v32/boot/rescue/head.S b/arch/cris/arch-v32/boot/rescue/head.S index 8cdb4011bc16..5f846b7700a3 100644 --- a/arch/cris/arch-v32/boot/rescue/head.S +++ b/arch/cris/arch-v32/boot/rescue/head.S @@ -1,38 +1,26 @@ -/* $Id: head.S,v 1.4 2004/11/01 16:10:28 starvik Exp $ +/* + * Just get started by jumping to CONFIG_ETRAX_PTABLE_SECTOR to start + * kernel decompressor. + * + * In practice, this only works for NOR flash (or some convoluted RAM boot) + * and hence is not really useful for Artpec-3, so it's Etrax FS / NOR only. * - * This used to be the rescue code but now that is handled by the - * RedBoot based RFL instead. Nothing to see here, move along. */ -#include <asm/arch/hwregs/reg_map_asm.h> -#include <asm/arch/hwregs/config_defs_asm.h> +#include <mach/startup.inc> - .text +#ifdef CONFIG_ETRAX_AXISFLASHMAP - ;; Start clocks for used blocks. - move.d REG_ADDR(config, regi_config, rw_clk_ctrl), $r1 - move.d [$r1], $r0 - or.d REG_STATE(config, rw_clk_ctrl, cpu, yes) | \ - REG_STATE(config, rw_clk_ctrl, bif, yes) | \ - REG_STATE(config, rw_clk_ctrl, fix_io, yes), $r0 - move.d $r0, [$r1] +;; Code - ;; Copy 68KB NAND flash to Internal RAM (if NAND boot) - move.d 0x38004000, $r10 - move.d 0x8000, $r11 - move.d 0x11000, $r12 - move.d copy_complete, $r13 - and.d 0x000fffff, $r13 - or.d 0x38000000, $r13 + .text +start: -#include "../../lib/nand_init.S" + ;; Start clocks for used blocks. + START_CLOCKS - ;; No NAND found move.d CONFIG_ETRAX_PTABLE_SECTOR, $r10 - jump $r10 ; Jump to decompresser + jump $r10 ; Jump to decompressor nop -copy_complete: - move.d 0x38000000 + CONFIG_ETRAX_PTABLE_SECTOR, $r10 - jump $r10 ; Jump to decompresser - nop +#endif diff --git a/arch/cris/arch-v32/boot/rescue/rescue.ld b/arch/cris/arch-v32/boot/rescue/rescue.ld index 42b11aa122b2..8ac646bc1a2b 100644 --- a/arch/cris/arch-v32/boot/rescue/rescue.ld +++ b/arch/cris/arch-v32/boot/rescue/rescue.ld @@ -1,20 +1,43 @@ +/*#OUTPUT_FORMAT(elf32-us-cris) */ +OUTPUT_ARCH (crisv32) +/* Now that NAND support has been stripped, this file could be simplified, + * but it doesn't do any harm on the other hand so why bother. */ + MEMORY { - flash : ORIGIN = 0x00000000, - LENGTH = 0x00100000 + bootblk : ORIGIN = 0x38000000, + LENGTH = 0x00004000 + intmem : ORIGIN = 0x38004000, + LENGTH = 0x00005000 } SECTIONS { .text : { - stext = . ; + _stext = . ; *(.text) - etext = . ; - } > flash + *(.init.text) + *(.rodata) + *(.rodata.*) + _etext = . ; + } > bootblk .data : { *(.data) - edata = . ; - } > flash + _edata = . ; + } > bootblk + .bss : + { + _bss = . ; + *(.bss) + _end = ALIGN( 0x10 ) ; + } > intmem + + /* Get rid of stuff from EXPORT_SYMBOL(foo). */ + /DISCARD/ : + { + *(__ksymtab_strings) + *(__ksymtab) + } } diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig index c329cce2a0c3..2a92cb1886ca 100644 --- a/arch/cris/arch-v32/drivers/Kconfig +++ b/arch/cris/arch-v32/drivers/Kconfig @@ -4,64 +4,102 @@ config ETRAX_ETHERNET bool "Ethernet support" depends on ETRAX_ARCH_V32 select NET_ETHERNET + select MII help This option enables the ETRAX FS built-in 10/100Mbit Ethernet controller. -config ETRAX_ETHERNET_HW_CSUM - bool "Hardware accelerated ethernet checksum and scatter/gather" +config ETRAX_NO_PHY + bool "PHY not present" depends on ETRAX_ETHERNET - depends on ETRAX_STREAMCOPROC - default y + default N help - Hardware acceleration of checksumming and scatter/gather + This option disables all MDIO communication with an ethernet + transceiver connected to the MII interface. This option shall + typically be enabled if the MII interface is connected to a + switch. This option should normally be disabled. If enabled, + speed and duplex will be locked to 100 Mbit and full duplex. config ETRAX_ETHERNET_IFACE0 depends on ETRAX_ETHERNET bool "Enable network interface 0" config ETRAX_ETHERNET_IFACE1 - depends on ETRAX_ETHERNET + depends on (ETRAX_ETHERNET && ETRAXFS) bool "Enable network interface 1 (uses DMA6 and DMA7)" +config ETRAX_ETHERNET_GBIT + depends on (ETRAX_ETHERNET && CRIS_MACH_ARTPEC3) + bool "Enable gigabit Ethernet support" + choice - prompt "Network LED behavior" - depends on ETRAX_ETHERNET - default ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY + prompt "Eth0 led group" + depends on ETRAX_ETHERNET_IFACE0 + default ETRAX_ETH0_USE_LEDGRP0 -config ETRAX_NETWORK_LED_ON_WHEN_LINK - bool "LED_on_when_link" +config ETRAX_ETH0_USE_LEDGRP0 + bool "Use LED grp 0" + depends on ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO help - Selecting LED_on_when_link will light the LED when there is a - connection and will flash off when there is activity. + Use LED grp 0 for eth0 - Selecting LED_on_when_activity will light the LED only when - there is activity. - - This setting will also affect the behaviour of other activity LEDs - e.g. Bluetooth. +config ETRAX_ETH0_USE_LEDGRP1 + bool "Use LED grp 1" + depends on ETRAX_NBR_LED_GRP_TWO + help + Use LED grp 1 for eth0 -config ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY - bool "LED_on_when_activity" +config ETRAX_ETH0_USE_LEDGRPNULL + bool "Use no LEDs for eth0" help - Selecting LED_on_when_link will light the LED when there is a - connection and will flash off when there is activity. + Use no LEDs for eth0 +endchoice - Selecting LED_on_when_activity will light the LED only when - there is activity. +choice + prompt "Eth1 led group" + depends on ETRAX_ETHERNET_IFACE1 + default ETRAX_ETH1_USE_LEDGRP1 + +config ETRAX_ETH1_USE_LEDGRP0 + bool "Use LED grp 0" + depends on ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO + help + Use LED grp 0 for eth1 - This setting will also affect the behaviour of other activity LEDs - e.g. Bluetooth. +config ETRAX_ETH1_USE_LEDGRP1 + bool "Use LED grp 1" + depends on ETRAX_NBR_LED_GRP_TWO + help + Use LED grp 1 for eth1 +config ETRAX_ETH1_USE_LEDGRPNULL + bool "Use no LEDs for eth1" + help + Use no LEDs for eth1 endchoice config ETRAXFS_SERIAL bool "Serial-port support" depends on ETRAX_ARCH_V32 + select SERIAL_CORE + select SERIAL_CORE_CONSOLE help Enables the ETRAX FS serial driver for ser0 (ttyS0) You probably want this enabled. +config ETRAX_RS485 + bool "RS-485 support" + depends on ETRAXFS_SERIAL + help + Enables support for RS-485 serial communication. + +config ETRAX_RS485_DISABLE_RECEIVER + bool "Disable serial receiver" + depends on ETRAX_RS485 + help + It is necessary to disable the serial receiver to avoid serial + loopback. Not all products are able to do this in software only. + config ETRAX_SERIAL_PORT0 bool "Serial port 0 enabled" depends on ETRAXFS_SERIAL @@ -72,50 +110,28 @@ config ETRAX_SERIAL_PORT0 ser0 can use dma4 or dma6 for output and dma5 or dma7 for input. choice - prompt "Ser0 DMA in channel " + prompt "Ser0 default port type " depends on ETRAX_SERIAL_PORT0 - default ETRAX_SERIAL_PORT0_NO_DMA_IN + default ETRAX_SERIAL_PORT0_TYPE_232 help - What DMA channel to use for ser0. - + Type of serial port. -config ETRAX_SERIAL_PORT0_NO_DMA_IN - bool "Ser0 uses no DMA for input" +config ETRAX_SERIAL_PORT0_TYPE_232 + bool "Ser0 is a RS-232 port" help - Do not use DMA for ser0 input. + Configure serial port 0 to be a RS-232 port. -config ETRAX_SERIAL_PORT0_DMA7_IN - bool "Ser0 uses DMA7 for input" - depends on ETRAX_SERIAL_PORT0 - help - Enables the DMA7 input channel for ser0 (ttyS0). - If you do not enable DMA, an interrupt for each character will be - used when receiving data. - Normally you want to use DMA, unless you use the DMA channel for - something else. - -endchoice - -choice - prompt "Ser0 DMA out channel" - depends on ETRAX_SERIAL_PORT0 - default ETRAX_SERIAL_PORT0_NO_DMA_OUT - -config ETRAX_SERIAL_PORT0_NO_DMA_OUT - bool "Ser0 uses no DMA for output" +config ETRAX_SERIAL_PORT0_TYPE_485HD + bool "Ser0 is a half duplex RS-485 port" + depends on ETRAX_RS485 help - Do not use DMA for ser0 output. + Configure serial port 0 to be a half duplex (two wires) RS-485 port. -config ETRAX_SERIAL_PORT0_DMA6_OUT - bool "Ser0 uses DMA6 for output" - depends on ETRAX_SERIAL_PORT0 +config ETRAX_SERIAL_PORT0_TYPE_485FD + bool "Ser0 is a full duplex RS-485 port" + depends on ETRAX_RS485 help - Enables the DMA6 output channel for ser0 (ttyS0). - If you do not enable DMA, an interrupt for each character will be - used when transmitting data. - Normally you want to use DMA, unless you use the DMA channel for - something else. - + Configure serial port 0 to be a full duplex (four wires) RS-485 port. endchoice config ETRAX_SER0_DTR_BIT @@ -141,52 +157,28 @@ config ETRAX_SERIAL_PORT1 Enables the ETRAX FS serial driver for ser1 (ttyS1). choice - prompt "Ser1 DMA in channel " + prompt "Ser1 default port type" depends on ETRAX_SERIAL_PORT1 - default ETRAX_SERIAL_PORT1_NO_DMA_IN - help - What DMA channel to use for ser1. - - -config ETRAX_SERIAL_PORT1_NO_DMA_IN - bool "Ser1 uses no DMA for input" + default ETRAX_SERIAL_PORT1_TYPE_232 help - Do not use DMA for ser1 input. + Type of serial port. -config ETRAX_SERIAL_PORT1_DMA5_IN - bool "Ser1 uses DMA5 for input" - depends on ETRAX_SERIAL_PORT1 +config ETRAX_SERIAL_PORT1_TYPE_232 + bool "Ser1 is a RS-232 port" help - Enables the DMA5 input channel for ser1 (ttyS1). - If you do not enable DMA, an interrupt for each character will be - used when receiving data. - Normally you want this on, unless you use the DMA channel for - something else. - -endchoice + Configure serial port 1 to be a RS-232 port. -choice - prompt "Ser1 DMA out channel " - depends on ETRAX_SERIAL_PORT1 - default ETRAX_SERIAL_PORT1_NO_DMA_OUT - help - What DMA channel to use for ser1. - -config ETRAX_SERIAL_PORT1_NO_DMA_OUT - bool "Ser1 uses no DMA for output" +config ETRAX_SERIAL_PORT1_TYPE_485HD + bool "Ser1 is a half duplex RS-485 port" + depends on ETRAX_RS485 help - Do not use DMA for ser1 output. + Configure serial port 1 to be a half duplex (two wires) RS-485 port. -config ETRAX_SERIAL_PORT1_DMA4_OUT - bool "Ser1 uses DMA4 for output" - depends on ETRAX_SERIAL_PORT1 +config ETRAX_SERIAL_PORT1_TYPE_485FD + bool "Ser1 is a full duplex RS-485 port" + depends on ETRAX_RS485 help - Enables the DMA4 output channel for ser1 (ttyS1). - If you do not enable DMA, an interrupt for each character will be - used when transmitting data. - Normally you want this on, unless you use the DMA channel for - something else. - + Configure serial port 1 to be a full duplex (four wires) RS-485 port. endchoice config ETRAX_SER1_DTR_BIT @@ -212,52 +204,31 @@ config ETRAX_SERIAL_PORT2 Enables the ETRAX FS serial driver for ser2 (ttyS2). choice - prompt "Ser2 DMA in channel " + prompt "Ser2 default port type" depends on ETRAX_SERIAL_PORT2 - default ETRAX_SERIAL_PORT2_NO_DMA_IN + default ETRAX_SERIAL_PORT2_TYPE_232 help - What DMA channel to use for ser2. + What DMA channel to use for ser2 - -config ETRAX_SERIAL_PORT2_NO_DMA_IN - bool "Ser2 uses no DMA for input" +config ETRAX_SERIAL_PORT2_TYPE_232 + bool "Ser2 is a RS-232 port" help - Do not use DMA for ser2 input. + Configure serial port 2 to be a RS-232 port. -config ETRAX_SERIAL_PORT2_DMA3_IN - bool "Ser2 uses DMA3 for input" - depends on ETRAX_SERIAL_PORT2 - help - Enables the DMA3 input channel for ser2 (ttyS2). - If you do not enable DMA, an interrupt for each character will be - used when receiving data. - Normally you want to use DMA, unless you use the DMA channel for - something else. - -endchoice - -choice - prompt "Ser2 DMA out channel" - depends on ETRAX_SERIAL_PORT2 - default ETRAX_SERIAL_PORT2_NO_DMA_OUT - -config ETRAX_SERIAL_PORT2_NO_DMA_OUT - bool "Ser2 uses no DMA for output" +config ETRAX_SERIAL_PORT2_TYPE_485HD + bool "Ser2 is a half duplex RS-485 port" + depends on ETRAX_RS485 help - Do not use DMA for ser2 output. + Configure serial port 2 to be a half duplex (two wires) RS-485 port. -config ETRAX_SERIAL_PORT2_DMA2_OUT - bool "Ser2 uses DMA2 for output" - depends on ETRAX_SERIAL_PORT2 +config ETRAX_SERIAL_PORT2_TYPE_485FD + bool "Ser2 is a full duplex RS-485 port" + depends on ETRAX_RS485 help - Enables the DMA2 output channel for ser2 (ttyS2). - If you do not enable DMA, an interrupt for each character will be - used when transmitting data. - Normally you want to use DMA, unless you use the DMA channel for - something else. - + Configure serial port 2 to be a full duplex (four wires) RS-485 port. endchoice + config ETRAX_SER2_DTR_BIT string "Ser 2 DTR bit (empty = not used)" depends on ETRAX_SERIAL_PORT2 @@ -281,71 +252,121 @@ config ETRAX_SERIAL_PORT3 Enables the ETRAX FS serial driver for ser3 (ttyS3). choice - prompt "Ser3 DMA in channel " + prompt "Ser3 default port type" depends on ETRAX_SERIAL_PORT3 - default ETRAX_SERIAL_PORT3_NO_DMA_IN + default ETRAX_SERIAL_PORT3_TYPE_232 help What DMA channel to use for ser3. +config ETRAX_SERIAL_PORT3_TYPE_232 + bool "Ser3 is a RS-232 port" + help + Configure serial port 3 to be a RS-232 port. -config ETRAX_SERIAL_PORT3_NO_DMA_IN - bool "Ser3 uses no DMA for input" +config ETRAX_SERIAL_PORT3_TYPE_485HD + bool "Ser3 is a half duplex RS-485 port" + depends on ETRAX_RS485 help - Do not use DMA for ser3 input. + Configure serial port 3 to be a half duplex (two wires) RS-485 port. -config ETRAX_SERIAL_PORT3_DMA9_IN - bool "Ser3 uses DMA9 for input" +config ETRAX_SERIAL_PORT3_TYPE_485FD + bool "Ser3 is a full duplex RS-485 port" + depends on ETRAX_RS485 + help + Configure serial port 3 to be a full duplex (four wires) RS-485 port. +endchoice + +config ETRAX_SER3_DTR_BIT + string "Ser 3 DTR bit (empty = not used)" + depends on ETRAX_SERIAL_PORT3 + +config ETRAX_SER3_RI_BIT + string "Ser 3 RI bit (empty = not used)" + depends on ETRAX_SERIAL_PORT3 + +config ETRAX_SER3_DSR_BIT + string "Ser 3 DSR bit (empty = not used)" + depends on ETRAX_SERIAL_PORT3 + +config ETRAX_SER3_CD_BIT + string "Ser 3 CD bit (empty = not used)" depends on ETRAX_SERIAL_PORT3 + +config ETRAX_SERIAL_PORT4 + bool "Serial port 4 enabled" + depends on ETRAXFS_SERIAL && CRIS_MACH_ARTPEC3 help - Enables the DMA9 input channel for ser3 (ttyS3). - If you do not enable DMA, an interrupt for each character will be - used when receiving data. - Normally you want to use DMA, unless you use the DMA channel for - something else. + Enables the ETRAX FS serial driver for ser4 (ttyS4). + +choice + prompt "Ser4 default port type" + depends on ETRAX_SERIAL_PORT4 + default ETRAX_SERIAL_PORT4_TYPE_232 + help + What DMA channel to use for ser4. +config ETRAX_SERIAL_PORT4_TYPE_232 + bool "Ser4 is a RS-232 port" + help + Configure serial port 4 to be a RS-232 port. + +config ETRAX_SERIAL_PORT4_TYPE_485HD + bool "Ser4 is a half duplex RS-485 port" + depends on ETRAX_RS485 + help + Configure serial port 4 to be a half duplex (two wires) RS-485 port. + +config ETRAX_SERIAL_PORT4_TYPE_485FD + bool "Ser4 is a full duplex RS-485 port" + depends on ETRAX_RS485 + help + Configure serial port 4 to be a full duplex (four wires) RS-485 port. endchoice choice - prompt "Ser3 DMA out channel" - depends on ETRAX_SERIAL_PORT3 - default ETRAX_SERIAL_PORT3_NO_DMA_OUT + prompt "Ser4 DMA in channel " + depends on ETRAX_SERIAL_PORT4 + default ETRAX_SERIAL_PORT4_NO_DMA_IN + help + What DMA channel to use for ser4. + -config ETRAX_SERIAL_PORT3_NO_DMA_OUT - bool "Ser3 uses no DMA for output" +config ETRAX_SERIAL_PORT4_NO_DMA_IN + bool "Ser4 uses no DMA for input" help - Do not use DMA for ser3 output. + Do not use DMA for ser4 input. -config ETRAX_SERIAL_PORT3_DMA8_OUT - bool "Ser3 uses DMA8 for output" - depends on ETRAX_SERIAL_PORT3 +config ETRAX_SERIAL_PORT4_DMA9_IN + bool "Ser4 uses DMA9 for input" + depends on ETRAX_SERIAL_PORT4 help - Enables the DMA8 output channel for ser3 (ttyS3). + Enables the DMA9 input channel for ser4 (ttyS4). If you do not enable DMA, an interrupt for each character will be - used when transmitting data. + used when receiveing data. Normally you want to use DMA, unless you use the DMA channel for something else. endchoice -config ETRAX_SER3_DTR_BIT - string "Ser 3 DTR bit (empty = not used)" - depends on ETRAX_SERIAL_PORT3 +config ETRAX_SER4_DTR_BIT + string "Ser 4 DTR bit (empty = not used)" + depends on ETRAX_SERIAL_PORT4 -config ETRAX_SER3_RI_BIT - string "Ser 3 RI bit (empty = not used)" - depends on ETRAX_SERIAL_PORT3 +config ETRAX_SER4_RI_BIT + string "Ser 4 RI bit (empty = not used)" + depends on ETRAX_SERIAL_PORT4 -config ETRAX_SER3_DSR_BIT - string "Ser 3 DSR bit (empty = not used)" - depends on ETRAX_SERIAL_PORT3 +config ETRAX_SER4_DSR_BIT + string "Ser 4 DSR bit (empty = not used)" + depends on ETRAX_SERIAL_PORT4 config ETRAX_SER3_CD_BIT - string "Ser 3 CD bit (empty = not used)" - depends on ETRAX_SERIAL_PORT3 + string "Ser 4 CD bit (empty = not used)" + depends on ETRAX_SERIAL_PORT4 config ETRAX_RS485 bool "RS-485 support" - depends on ETRAX_SERIAL + depends on ETRAXFS_SERIAL help Enables support for RS-485 serial communication. For a primer on RS-485, see <http://www.hw.cz/english/docs/rs485/rs485.html>. @@ -356,22 +377,6 @@ config ETRAX_RS485_DISABLE_RECEIVER help It is necessary to disable the serial receiver to avoid serial loopback. Not all products are able to do this in software only. - Axis 2400/2401 must disable receiver. - -config ETRAX_AXISFLASHMAP - bool "Axis flash-map support" - depends on ETRAX_ARCH_V32 - select MTD - select MTD_CFI - select MTD_CFI_AMDSTD - select MTD_CHAR - select MTD_BLOCK - select MTD_PARTITIONS - select MTD_CONCAT - select MTD_COMPLEX_MAPPINGS - help - This option enables MTD mapping of flash devices. Needed to use - flash memories. If unsure, say Y. config ETRAX_SYNCHRONOUS_SERIAL bool "Synchronous serial-port support" @@ -394,7 +399,7 @@ config ETRAX_SYNCHRONOUS_SERIAL0_DMA config ETRAX_SYNCHRONOUS_SERIAL_PORT1 bool "Synchronous serial port 1 enabled" - depends on ETRAX_SYNCHRONOUS_SERIAL + depends on ETRAX_SYNCHRONOUS_SERIAL && ETRAXFS help Enabled synchronous serial port 1. @@ -405,6 +410,31 @@ config ETRAX_SYNCHRONOUS_SERIAL1_DMA A synchronous serial port can run in manual or DMA mode. Selecting this option will make it run in DMA mode. +config ETRAX_AXISFLASHMAP + bool "Axis flash-map support" + depends on ETRAX_ARCH_V32 + select MTD + select MTD_CFI + select MTD_CFI_AMDSTD + select MTD_JEDECPROBE + select MTD_CHAR + select MTD_BLOCK + select MTD_PARTITIONS + select MTD_CONCAT + select MTD_COMPLEX_MAPPINGS + help + This option enables MTD mapping of flash devices. Needed to use + flash memories. If unsure, say Y. + +config ETRAX_AXISFLASHMAP_MTD0WHOLE + bool "MTD0 is whole boot flash device" + depends on ETRAX_AXISFLASHMAP + default N + help + When this option is not set, mtd0 refers to the first partition + on the boot flash device. When set, mtd0 refers to the whole + device, with mtd1 referring to the first partition etc. + config ETRAX_PTABLE_SECTOR int "Byte-offset of partition table sector" depends on ETRAX_AXISFLASHMAP @@ -425,42 +455,32 @@ config ETRAX_NANDFLASH This option enables MTD mapping of NAND flash devices. Needed to use NAND flash memories. If unsure, say Y. +config ETRAX_NANDBOOT + bool "Boot from NAND flash" + depends on ETRAX_NANDFLASH + help + This options enables booting from NAND flash devices. + Say Y if your boot code, kernel and root file system is in + NAND flash. Say N if they are in NOR flash. + config ETRAX_I2C bool "I2C driver" depends on ETRAX_ARCH_V32 help - This option enabled the I2C driver used by e.g. the RTC driver. + This option enables the I2C driver used by e.g. the RTC driver. -config ETRAX_I2C_DATA_PORT +config ETRAX_V32_I2C_DATA_PORT string "I2C data pin" depends on ETRAX_I2C help The pin to use for I2C data. -config ETRAX_I2C_CLK_PORT +config ETRAX_V32_I2C_CLK_PORT string "I2C clock pin" depends on ETRAX_I2C help The pin to use for I2C clock. -config ETRAX_RTC - bool "Real Time Clock support" - depends on ETRAX_ARCH_V32 - help - Enabled RTC support. - -choice - prompt "RTC chip" - depends on ETRAX_RTC - default ETRAX_PCF8563 - -config ETRAX_PCF8563 - bool "PCF8563" - help - Philips PCF8563 RTC - -endchoice - config ETRAX_GPIO bool "GPIO support" depends on ETRAX_ARCH_V32 @@ -476,33 +496,36 @@ config ETRAX_GPIO Remember that you need to setup the port directions appropriately in the General configuration. -config ETRAX_PA_BUTTON_BITMASK - hex "PA-buttons bitmask" +config ETRAX_VIRTUAL_GPIO + bool "Virtual GPIO support" depends on ETRAX_GPIO - default "0x02" help - This is a bitmask (8 bits) with information about what bits on PA - that are used for buttons. - Most products has a so called TEST button on PA1, if that is true - use 0x02 here. - Use 00 if there are no buttons on PA. - If the bitmask is <> 00 a button driver will be included in the gpio - driver. ETRAX general I/O support must be enabled. + Enables the virtual Etrax general port device (major 120, minor 6). + It uses an I/O expander for the I2C-bus. + +config ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN + int "Virtual GPIO interrupt pin on PA pin" + range 0 7 + depends on ETRAX_VIRTUAL_GPIO + help + The pin to use on PA for virtual gpio interrupt. config ETRAX_PA_CHANGEABLE_DIR hex "PA user changeable dir mask" depends on ETRAX_GPIO - default "0x00" + default "0x00" if ETRAXFS + default "0x00000000" if !ETRAXFS help This is a bitmask (8 bits) with information of what bits in PA that a user can change direction on using ioctl's. Bit set = changeable. - You probably want 0x00 here, but it depends on your hardware. + You probably want 0 here, but it depends on your hardware. config ETRAX_PA_CHANGEABLE_BITS hex "PA user changeable bits mask" depends on ETRAX_GPIO - default "0x00" + default "0x00" if ETRAXFS + default "0x00000000" if !ETRAXFS help This is a bitmask (8 bits) with information of what bits in PA that a user can change the value on using ioctl's. @@ -511,17 +534,19 @@ config ETRAX_PA_CHANGEABLE_BITS config ETRAX_PB_CHANGEABLE_DIR hex "PB user changeable dir mask" depends on ETRAX_GPIO - default "0x00000" + default "0x00000" if ETRAXFS + default "0x00000000" if !ETRAXFS help This is a bitmask (18 bits) with information of what bits in PB that a user can change direction on using ioctl's. Bit set = changeable. - You probably want 0x00000 here, but it depends on your hardware. + You probably want 0 here, but it depends on your hardware. config ETRAX_PB_CHANGEABLE_BITS hex "PB user changeable bits mask" depends on ETRAX_GPIO - default "0x00000" + default "0x00000" if ETRAXFS + default "0x00000000" if !ETRAXFS help This is a bitmask (18 bits) with information of what bits in PB that a user can change the value on using ioctl's. @@ -530,17 +555,19 @@ config ETRAX_PB_CHANGEABLE_BITS config ETRAX_PC_CHANGEABLE_DIR hex "PC user changeable dir mask" depends on ETRAX_GPIO - default "0x00000" + default "0x00000" if ETRAXFS + default "0x00000000" if !ETRAXFS help This is a bitmask (18 bits) with information of what bits in PC that a user can change direction on using ioctl's. Bit set = changeable. - You probably want 0x00000 here, but it depends on your hardware. + You probably want 0 here, but it depends on your hardware. config ETRAX_PC_CHANGEABLE_BITS hex "PC user changeable bits mask" depends on ETRAX_GPIO - default "0x00000" + default "0x00000" if ETRAXFS + default "0x00000000" if ETRAXFS help This is a bitmask (18 bits) with information of what bits in PC that a user can change the value on using ioctl's. @@ -548,7 +575,7 @@ config ETRAX_PC_CHANGEABLE_BITS config ETRAX_PD_CHANGEABLE_DIR hex "PD user changeable dir mask" - depends on ETRAX_GPIO + depends on ETRAX_GPIO && ETRAXFS default "0x00000" help This is a bitmask (18 bits) with information of what bits in PD @@ -558,7 +585,7 @@ config ETRAX_PD_CHANGEABLE_DIR config ETRAX_PD_CHANGEABLE_BITS hex "PD user changeable bits mask" - depends on ETRAX_GPIO + depends on ETRAX_GPIO && ETRAXFS default "0x00000" help This is a bitmask (18 bits) with information of what bits in PD @@ -567,7 +594,7 @@ config ETRAX_PD_CHANGEABLE_BITS config ETRAX_PE_CHANGEABLE_DIR hex "PE user changeable dir mask" - depends on ETRAX_GPIO + depends on ETRAX_GPIO && ETRAXFS default "0x00000" help This is a bitmask (18 bits) with information of what bits in PE @@ -577,20 +604,36 @@ config ETRAX_PE_CHANGEABLE_DIR config ETRAX_PE_CHANGEABLE_BITS hex "PE user changeable bits mask" - depends on ETRAX_GPIO + depends on ETRAX_GPIO && ETRAXFS default "0x00000" help This is a bitmask (18 bits) with information of what bits in PE that a user can change the value on using ioctl's. Bit set = changeable. +config ETRAX_PV_CHANGEABLE_DIR + hex "PV user changeable dir mask" + depends on ETRAX_VIRTUAL_GPIO + default "0x0000" + help + This is a bitmask (16 bits) with information of what bits in PV + that a user can change direction on using ioctl's. + Bit set = changeable. + You probably want 0x0000 here, but it depends on your hardware. + +config ETRAX_PV_CHANGEABLE_BITS + hex "PV user changeable bits mask" + depends on ETRAX_VIRTUAL_GPIO + default "0x0000" + help + This is a bitmask (16 bits) with information of what bits in PV + that a user can change the value on using ioctl's. + Bit set = changeable. + config ETRAX_CARDBUS bool "Cardbus support" depends on ETRAX_ARCH_V32 - select PCCARD - select CARDBUS select HOTPLUG - select PCCARD_NONSTATIC help Enabled the ETRAX Cardbus driver. @@ -613,4 +656,202 @@ config ETRAX_STREAMCOPROC This option enables a driver for the stream co-processor for cryptographic operations. +source drivers/mmc/Kconfig + +config ETRAX_MMC_IOP + tristate "MMC/SD host driver using IO-processor" + depends on ETRAX_ARCH_V32 && MMC + help + This option enables the SD/MMC host controller interface. + The host controller is implemented using the built in + IO-Processor. Only the SPU is used in this implementation. + +config ETRAX_SPI_MMC +# Make this one of several "choices" (possible simultaneously but +# suggested uniquely) when an IOP driver emerges for "real" MMC/SD +# protocol support. + tristate + depends on !ETRAX_MMC_IOP + default MMC + select SPI + select MMC_SPI + select ETRAX_SPI_MMC_BOARD + +# For the parts that can't be a module (due to restrictions in +# framework elsewhere). +config ETRAX_SPI_MMC_BOARD + boolean + default n + +# While the board info is MMC_SPI only, the drivers are written to be +# independent of MMC_SPI, so we'll keep SPI non-dependent on the +# MMC_SPI config choices (well, except for a single depends-on-line +# for the board-info file until a separate non-MMC SPI board file +# emerges). +# FIXME: When that happens, we'll need to be able to ask for and +# configure non-MMC SPI ports together with MMC_SPI ports (if multiple +# SPI ports are enabled). + +config SPI_ETRAX_SSER + tristate + depends on SPI_MASTER && ETRAX_ARCH_V32 && EXPERIMENTAL + select SPI_BITBANG + help + This enables using an synchronous serial (sser) port as a + SPI master controller on Axis ETRAX FS and later. The + driver can be configured to use any sser port. + +config SPI_ETRAX_GPIO + tristate + depends on SPI_MASTER && ETRAX_ARCH_V32 && EXPERIMENTAL + select SPI_BITBANG + help + This enables using GPIO pins port as a SPI master controller + on Axis ETRAX FS and later. The driver can be configured to + use any GPIO pins. + +config ETRAX_SPI_SSER0 + tristate "SPI using synchronous serial port 0 (sser0)" + depends on ETRAX_SPI_MMC + default m if MMC_SPI=m + default y if MMC_SPI=y + default y if MMC_SPI=n + select SPI_ETRAX_SSER + help + Say Y for an MMC/SD socket connected to synchronous serial port 0, + or for devices using the SPI protocol on that port. Say m if you + want to build it as a module, which will be named spi_crisv32_sser. + (You need to select MMC separately.) + +config ETRAX_SPI_SSER0_DMA + bool "DMA for SPI on sser0 enabled" + depends on ETRAX_SPI_SSER0 + depends on !ETRAX_SERIAL_PORT1_DMA4_OUT && !ETRAX_SERIAL_PORT1_DMA5_IN + default y + help + Say Y if using DMA (dma4/dma5) for SPI on synchronous serial port 0. + +config ETRAX_SPI_MMC_CD_SSER0_PIN + string "MMC/SD card detect pin for SPI on sser0" + depends on ETRAX_SPI_SSER0 && MMC_SPI + default "pd11" + help + The pin to use for SD/MMC card detect. This pin should be pulled up + and grounded when a card is present. If defined as " " (space), no + pin is selected. A card must then always be inserted for proper + action. + +config ETRAX_SPI_MMC_WP_SSER0_PIN + string "MMC/SD card write-protect pin for SPI on sser0" + depends on ETRAX_SPI_SSER0 && MMC_SPI + default "pd10" + help + The pin to use for the SD/MMC write-protect signal for a memory + card. If defined as " " (space), the card is considered writable. + +config ETRAX_SPI_SSER1 + tristate "SPI using synchronous serial port 1 (sser1)" + depends on ETRAX_SPI_MMC + default m if MMC_SPI=m && ETRAX_SPI_SSER0=n + default y if MMC_SPI=y && ETRAX_SPI_SSER0=n + default y if MMC_SPI=n && ETRAX_SPI_SSER0=n + select SPI_ETRAX_SSER + help + Say Y for an MMC/SD socket connected to synchronous serial port 1, + or for devices using the SPI protocol on that port. Say m if you + want to build it as a module, which will be named spi_crisv32_sser. + (You need to select MMC separately.) + +config ETRAX_SPI_SSER1_DMA + bool "DMA for SPI on sser1 enabled" + depends on ETRAX_SPI_SSER1 && !ETRAX_ETHERNET_IFACE1 + depends on !ETRAX_SERIAL_PORT0_DMA6_OUT && !ETRAX_SERIAL_PORT0_DMA7_IN + default y + help + Say Y if using DMA (dma6/dma7) for SPI on synchronous serial port 1. + +config ETRAX_SPI_MMC_CD_SSER1_PIN + string "MMC/SD card detect pin for SPI on sser1" + depends on ETRAX_SPI_SSER1 && MMC_SPI + default "pd12" + help + The pin to use for SD/MMC card detect. This pin should be pulled up + and grounded when a card is present. If defined as " " (space), no + pin is selected. A card must then always be inserted for proper + action. + +config ETRAX_SPI_MMC_WP_SSER1_PIN + string "MMC/SD card write-protect pin for SPI on sser1" + depends on ETRAX_SPI_SSER1 && MMC_SPI + default "pd9" + help + The pin to use for the SD/MMC write-protect signal for a memory + card. If defined as " " (space), the card is considered writable. + +config ETRAX_SPI_GPIO + tristate "Bitbanged SPI using gpio pins" + depends on ETRAX_SPI_MMC + select SPI_ETRAX_GPIO + default m if MMC_SPI=m && ETRAX_SPI_SSER0=n && ETRAX_SPI_SSER1=n + default y if MMC_SPI=y && ETRAX_SPI_SSER0=n && ETRAX_SPI_SSER1=n + default y if MMC_SPI=n && ETRAX_SPI_SSER0=n && ETRAX_SPI_SSER1=n + help + Say Y for an MMC/SD socket connected to general I/O pins (but not + a complete synchronous serial ports), or for devices using the SPI + protocol on general I/O pins. Slow and slows down the system. + Say m to build it as a module, which will be called spi_crisv32_gpio. + (You need to select MMC separately.) + +# The default match that of sser0, only because that's how it was tested. +config ETRAX_SPI_CS_PIN + string "SPI chip select pin" + depends on ETRAX_SPI_GPIO + default "pc3" + help + The pin to use for SPI chip select. + +config ETRAX_SPI_CLK_PIN + string "SPI clock pin" + depends on ETRAX_SPI_GPIO + default "pc1" + help + The pin to use for the SPI clock. + +config ETRAX_SPI_DATAIN_PIN + string "SPI MISO (data in) pin" + depends on ETRAX_SPI_GPIO + default "pc16" + help + The pin to use for SPI data in from the device. + +config ETRAX_SPI_DATAOUT_PIN + string "SPI MOSI (data out) pin" + depends on ETRAX_SPI_GPIO + default "pc0" + help + The pin to use for SPI data out to the device. + +config ETRAX_SPI_MMC_CD_GPIO_PIN + string "MMC/SD card detect pin for SPI using gpio (space for none)" + depends on ETRAX_SPI_GPIO && MMC_SPI + default "pd11" + help + The pin to use for SD/MMC card detect. This pin should be pulled up + and grounded when a card is present. If defined as " " (space), no + pin is selected. A card must then always be inserted for proper + action. + +config ETRAX_SPI_MMC_WP_GPIO_PIN + string "MMC/SD card write-protect pin for SPI using gpio (space for none)" + depends on ETRAX_SPI_GPIO && MMC_SPI + default "pd10" + help + The pin to use for the SD/MMC write-protect signal for a memory + card. If defined as " " (space), the card is considered writable. + +# Avoid choices causing non-working configs by conditionalizing the inclusion. +if ETRAX_SPI_MMC +source drivers/spi/Kconfig +endif + endif diff --git a/arch/cris/arch-v32/drivers/Makefile b/arch/cris/arch-v32/drivers/Makefile index a359cd20ae75..e8c02437edaf 100644 --- a/arch/cris/arch-v32/drivers/Makefile +++ b/arch/cris/arch-v32/drivers/Makefile @@ -4,10 +4,11 @@ obj-$(CONFIG_ETRAX_STREAMCOPROC) += cryptocop.o obj-$(CONFIG_ETRAX_AXISFLASHMAP) += axisflashmap.o -obj-$(CONFIG_ETRAX_NANDFLASH) += nandflash.o -obj-$(CONFIG_ETRAX_GPIO) += gpio.o +obj-$(CONFIG_ETRAXFS) += mach-fs/ +obj-$(CONFIG_CRIS_MACH_ARTPEC3) += mach-a3/ obj-$(CONFIG_ETRAX_IOP_FW_LOAD) += iop_fw_load.o obj-$(CONFIG_ETRAX_PCF8563) += pcf8563.o obj-$(CONFIG_ETRAX_I2C) += i2c.o obj-$(CONFIG_ETRAX_SYNCHRONOUS_SERIAL) += sync_serial.o obj-$(CONFIG_PCI) += pci/ +obj-$(CONFIG_ETRAX_SPI_MMC_BOARD) += board_mmcspi.o diff --git a/arch/cris/arch-v32/drivers/axisflashmap.c b/arch/cris/arch-v32/drivers/axisflashmap.c index c5ff95e18269..51e1e85df96d 100644 --- a/arch/cris/arch-v32/drivers/axisflashmap.c +++ b/arch/cris/arch-v32/drivers/axisflashmap.c @@ -1,7 +1,7 @@ /* * Physical mapping layer for MTD using the Axis partitiontable format * - * Copyright (c) 2001, 2002, 2003 Axis Communications AB + * Copyright (c) 2001-2007 Axis Communications AB * * This file is under the GPL. * @@ -10,9 +10,6 @@ * tells us what other partitions to define. If there isn't, we use a default * partition split defined below. * - * Copy of os/lx25/arch/cris/arch-v10/drivers/axisflashmap.c 1.5 - * with minor changes. - * */ #include <linux/module.h> @@ -27,7 +24,8 @@ #include <linux/mtd/mtdram.h> #include <linux/mtd/partitions.h> -#include <asm/arch/hwregs/config_defs.h> +#include <linux/cramfs_fs.h> + #include <asm/axisflashmap.h> #include <asm/mmu.h> @@ -37,16 +35,24 @@ #define FLASH_UNCACHED_ADDR KSEG_E #define FLASH_CACHED_ADDR KSEG_F +#define PAGESIZE (512) + #if CONFIG_ETRAX_FLASH_BUSWIDTH==1 #define flash_data __u8 #elif CONFIG_ETRAX_FLASH_BUSWIDTH==2 #define flash_data __u16 #elif CONFIG_ETRAX_FLASH_BUSWIDTH==4 -#define flash_data __u16 +#define flash_data __u32 #endif /* From head.S */ -extern unsigned long romfs_start, romfs_length, romfs_in_flash; +extern unsigned long romfs_in_flash; /* 1 when romfs_start, _length in flash */ +extern unsigned long romfs_start, romfs_length; +extern unsigned long nand_boot; /* 1 when booted from nand flash */ + +struct partition_name { + char name[6]; +}; /* The master mtd for the entire flash. */ struct mtd_info* axisflash_mtd = NULL; @@ -112,32 +118,20 @@ static struct map_info map_cse1 = { .map_priv_1 = FLASH_UNCACHED_ADDR + MEM_CSE0_SIZE }; -/* If no partition-table was found, we use this default-set. */ -#define MAX_PARTITIONS 7 -#define NUM_DEFAULT_PARTITIONS 3 +#define MAX_PARTITIONS 7 +#ifdef CONFIG_ETRAX_NANDBOOT +#define NUM_DEFAULT_PARTITIONS 4 +#define DEFAULT_ROOTFS_PARTITION_NO 2 +#define DEFAULT_MEDIA_SIZE 0x2000000 /* 32 megs */ +#else +#define NUM_DEFAULT_PARTITIONS 3 +#define DEFAULT_ROOTFS_PARTITION_NO (-1) +#define DEFAULT_MEDIA_SIZE 0x800000 /* 8 megs */ +#endif -/* - * Default flash size is 2MB. CONFIG_ETRAX_PTABLE_SECTOR is most likely the - * size of one flash block and "filesystem"-partition needs 5 blocks to be able - * to use JFFS. - */ -static struct mtd_partition axis_default_partitions[NUM_DEFAULT_PARTITIONS] = { - { - .name = "boot firmware", - .size = CONFIG_ETRAX_PTABLE_SECTOR, - .offset = 0 - }, - { - .name = "kernel", - .size = 0x200000 - (6 * CONFIG_ETRAX_PTABLE_SECTOR), - .offset = CONFIG_ETRAX_PTABLE_SECTOR - }, - { - .name = "filesystem", - .size = 5 * CONFIG_ETRAX_PTABLE_SECTOR, - .offset = 0x200000 - (5 * CONFIG_ETRAX_PTABLE_SECTOR) - } -}; +#if (MAX_PARTITIONS < NUM_DEFAULT_PARTITIONS) +#error MAX_PARTITIONS must be >= than NUM_DEFAULT_PARTITIONS +#endif /* Initialize the ones normally used. */ static struct mtd_partition axis_partitions[MAX_PARTITIONS] = { @@ -178,6 +172,56 @@ static struct mtd_partition axis_partitions[MAX_PARTITIONS] = { }, }; + +/* If no partition-table was found, we use this default-set. + * Default flash size is 8MB (NOR). CONFIG_ETRAX_PTABLE_SECTOR is most + * likely the size of one flash block and "filesystem"-partition needs + * to be >=5 blocks to be able to use JFFS. + */ +static struct mtd_partition axis_default_partitions[NUM_DEFAULT_PARTITIONS] = { + { + .name = "boot firmware", + .size = CONFIG_ETRAX_PTABLE_SECTOR, + .offset = 0 + }, + { + .name = "kernel", + .size = 10 * CONFIG_ETRAX_PTABLE_SECTOR, + .offset = CONFIG_ETRAX_PTABLE_SECTOR + }, +#define FILESYSTEM_SECTOR (11 * CONFIG_ETRAX_PTABLE_SECTOR) +#ifdef CONFIG_ETRAX_NANDBOOT + { + .name = "rootfs", + .size = 10 * CONFIG_ETRAX_PTABLE_SECTOR, + .offset = FILESYSTEM_SECTOR + }, +#undef FILESYSTEM_SECTOR +#define FILESYSTEM_SECTOR (21 * CONFIG_ETRAX_PTABLE_SECTOR) +#endif + { + .name = "rwfs", + .size = DEFAULT_MEDIA_SIZE - FILESYSTEM_SECTOR, + .offset = FILESYSTEM_SECTOR + } +}; + +#ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE +/* Main flash device */ +static struct mtd_partition main_partition = { + .name = "main", + .size = 0, + .offset = 0 +}; +#endif + +/* Auxilliary partition if we find another flash */ +static struct mtd_partition aux_partition = { + .name = "aux", + .size = 0, + .offset = 0 +}; + /* * Probe a chip select for AMD-compatible (JEDEC) or CFI-compatible flash * chips in that order (because the amd_flash-driver is faster). @@ -191,7 +235,7 @@ static struct mtd_info *probe_cs(struct map_info *map_cs) map_cs->name, map_cs->size, map_cs->map_priv_1); #ifdef CONFIG_MTD_CFI - mtd_cs = do_map_probe("cfi_probe", map_cs); + mtd_cs = do_map_probe("cfi_probe", map_cs); #endif #ifdef CONFIG_MTD_JEDECPROBE if (!mtd_cs) @@ -204,7 +248,7 @@ static struct mtd_info *probe_cs(struct map_info *map_cs) /* * Probe each chip select individually for flash chips. If there are chips on * both cse0 and cse1, the mtd_info structs will be concatenated to one struct - * so that MTD partitions can cross chip boundaries. + * so that MTD partitions can cross chip boundries. * * The only known restriction to how you can mount your chips is that each * chip select must hold similar flash chips. But you need external hardware @@ -216,9 +260,8 @@ static struct mtd_info *flash_probe(void) { struct mtd_info *mtd_cse0; struct mtd_info *mtd_cse1; - struct mtd_info *mtd_nand = NULL; struct mtd_info *mtd_total; - struct mtd_info *mtds[3]; + struct mtd_info *mtds[2]; int count = 0; if ((mtd_cse0 = probe_cs(&map_cse0)) != NULL) @@ -226,12 +269,7 @@ static struct mtd_info *flash_probe(void) if ((mtd_cse1 = probe_cs(&map_cse1)) != NULL) mtds[count++] = mtd_cse1; -#ifdef CONFIG_ETRAX_NANDFLASH - if ((mtd_nand = crisv32_nand_flash_probe()) != NULL) - mtds[count++] = mtd_nand; -#endif - - if (!mtd_cse0 && !mtd_cse1 && !mtd_nand) { + if (!mtd_cse0 && !mtd_cse1) { /* No chip found. */ return NULL; } @@ -245,9 +283,7 @@ static struct mtd_info *flash_probe(void) * So we use the MTD concatenation layer instead of further * complicating the probing procedure. */ - mtd_total = mtd_concat_create(mtds, - count, - "cse0+cse1+nand"); + mtd_total = mtd_concat_create(mtds, count, "cse0+cse1"); #else printk(KERN_ERR "%s and %s: Cannot concatenate due to kernel " "(mis)configuration!\n", map_cse0.name, map_cse1.name); @@ -255,61 +291,162 @@ static struct mtd_info *flash_probe(void) #endif if (!mtd_total) { printk(KERN_ERR "%s and %s: Concatenation failed!\n", - map_cse0.name, map_cse1.name); + map_cse0.name, map_cse1.name); /* The best we can do now is to only use what we found - * at cse0. - */ + * at cse0. */ mtd_total = mtd_cse0; map_destroy(mtd_cse1); } - } else { - mtd_total = mtd_cse0? mtd_cse0 : mtd_cse1 ? mtd_cse1 : mtd_nand; - - } + } else + mtd_total = mtd_cse0 ? mtd_cse0 : mtd_cse1; return mtd_total; } -extern unsigned long crisv32_nand_boot; -extern unsigned long crisv32_nand_cramfs_offset; - /* * Probe the flash chip(s) and, if it succeeds, read the partition-table * and register the partitions with MTD. */ static int __init init_axis_flash(void) { - struct mtd_info *mymtd; + struct mtd_info *main_mtd; + struct mtd_info *aux_mtd = NULL; int err = 0; int pidx = 0; struct partitiontable_head *ptable_head = NULL; struct partitiontable_entry *ptable; - int use_default_ptable = 1; /* Until proven otherwise. */ - const char *pmsg = KERN_INFO " /dev/flash%d at 0x%08x, size 0x%08x\n"; - static char page[512]; + int ptable_ok = 0; + static char page[PAGESIZE]; size_t len; + int ram_rootfs_partition = -1; /* -1 => no RAM rootfs partition */ + int part; + + /* We need a root fs. If it resides in RAM, we need to use an + * MTDRAM device, so it must be enabled in the kernel config, + * but its size must be configured as 0 so as not to conflict + * with our usage. + */ +#if !defined(CONFIG_MTD_MTDRAM) || (CONFIG_MTDRAM_TOTAL_SIZE != 0) || (CONFIG_MTDRAM_ABS_POS != 0) + if (!romfs_in_flash && !nand_boot) { + printk(KERN_EMERG "axisflashmap: Cannot create an MTD RAM " + "device; configure CONFIG_MTD_MTDRAM with size = 0!\n"); + panic("This kernel cannot boot from RAM!\n"); + } +#endif + +#ifndef CONFIG_ETRAX_VCS_SIM + main_mtd = flash_probe(); + if (main_mtd) + printk(KERN_INFO "%s: 0x%08x bytes of NOR flash memory.\n", + main_mtd->name, main_mtd->size); + +#ifdef CONFIG_ETRAX_NANDFLASH + aux_mtd = crisv32_nand_flash_probe(); + if (aux_mtd) + printk(KERN_INFO "%s: 0x%08x bytes of NAND flash memory.\n", + aux_mtd->name, aux_mtd->size); + +#ifdef CONFIG_ETRAX_NANDBOOT + { + struct mtd_info *tmp_mtd; -#ifndef CONFIG_ETRAXFS_SIM - mymtd = flash_probe(); - mymtd->read(mymtd, CONFIG_ETRAX_PTABLE_SECTOR, 512, &len, page); - ptable_head = (struct partitiontable_head *)(page + PARTITION_TABLE_OFFSET); + printk(KERN_INFO "axisflashmap: Set to boot from NAND flash, " + "making NAND flash primary device.\n"); + tmp_mtd = main_mtd; + main_mtd = aux_mtd; + aux_mtd = tmp_mtd; + } +#endif /* CONFIG_ETRAX_NANDBOOT */ +#endif /* CONFIG_ETRAX_NANDFLASH */ - if (!mymtd) { + if (!main_mtd && !aux_mtd) { /* There's no reason to use this module if no flash chip can * be identified. Make sure that's understood. */ printk(KERN_INFO "axisflashmap: Found no flash chip.\n"); - } else { - printk(KERN_INFO "%s: 0x%08x bytes of flash memory.\n", - mymtd->name, mymtd->size); - axisflash_mtd = mymtd; } - if (mymtd) { - mymtd->owner = THIS_MODULE; +#if 0 /* Dump flash memory so we can see what is going on */ + if (main_mtd) { + int sectoraddr, i; + for (sectoraddr = 0; sectoraddr < 2*65536+4096; + sectoraddr += PAGESIZE) { + main_mtd->read(main_mtd, sectoraddr, PAGESIZE, &len, + page); + printk(KERN_INFO + "Sector at %d (length %d):\n", + sectoraddr, len); + for (i = 0; i < PAGESIZE; i += 16) { + printk(KERN_INFO + "%02x %02x %02x %02x " + "%02x %02x %02x %02x " + "%02x %02x %02x %02x " + "%02x %02x %02x %02x\n", + page[i] & 255, page[i+1] & 255, + page[i+2] & 255, page[i+3] & 255, + page[i+4] & 255, page[i+5] & 255, + page[i+6] & 255, page[i+7] & 255, + page[i+8] & 255, page[i+9] & 255, + page[i+10] & 255, page[i+11] & 255, + page[i+12] & 255, page[i+13] & 255, + page[i+14] & 255, page[i+15] & 255); + } + } + } +#endif + + if (main_mtd) { + main_mtd->owner = THIS_MODULE; + axisflash_mtd = main_mtd; + + loff_t ptable_sector = CONFIG_ETRAX_PTABLE_SECTOR; + + /* First partition (rescue) is always set to the default. */ + pidx++; +#ifdef CONFIG_ETRAX_NANDBOOT + /* We know where the partition table should be located, + * it will be in first good block after that. + */ + int blockstat; + do { + blockstat = main_mtd->block_isbad(main_mtd, + ptable_sector); + if (blockstat < 0) + ptable_sector = 0; /* read error */ + else if (blockstat) + ptable_sector += main_mtd->erasesize; + } while (blockstat && ptable_sector); +#endif + if (ptable_sector) { + main_mtd->read(main_mtd, ptable_sector, PAGESIZE, + &len, page); + ptable_head = &((struct partitiontable *) page)->head; + } + +#if 0 /* Dump partition table so we can see what is going on */ + printk(KERN_INFO + "axisflashmap: flash read %d bytes at 0x%08x, data: " + "%02x %02x %02x %02x %02x %02x %02x %02x\n", + len, CONFIG_ETRAX_PTABLE_SECTOR, + page[0] & 255, page[1] & 255, + page[2] & 255, page[3] & 255, + page[4] & 255, page[5] & 255, + page[6] & 255, page[7] & 255); + printk(KERN_INFO + "axisflashmap: partition table offset %d, data: " + "%02x %02x %02x %02x %02x %02x %02x %02x\n", + PARTITION_TABLE_OFFSET, + page[PARTITION_TABLE_OFFSET+0] & 255, + page[PARTITION_TABLE_OFFSET+1] & 255, + page[PARTITION_TABLE_OFFSET+2] & 255, + page[PARTITION_TABLE_OFFSET+3] & 255, + page[PARTITION_TABLE_OFFSET+4] & 255, + page[PARTITION_TABLE_OFFSET+5] & 255, + page[PARTITION_TABLE_OFFSET+6] & 255, + page[PARTITION_TABLE_OFFSET+7] & 255); +#endif } - pidx++; /* First partition is always set to the default. */ if (ptable_head && (ptable_head->magic == PARTITION_TABLE_MAGIC) && (ptable_head->size < @@ -322,7 +459,6 @@ static int __init init_axis_flash(void) /* Looks like a start, sane length and end of a * partition table, lets check csum etc. */ - int ptable_ok = 0; struct partitiontable_entry *max_addr = (struct partitiontable_entry *) ((unsigned long)ptable_head + sizeof(*ptable_head) + @@ -346,104 +482,170 @@ static int __init init_axis_flash(void) ptable_ok = (csum == ptable_head->checksum); /* Read the entries and use/show the info. */ - printk(KERN_INFO " Found a%s partition table at 0x%p-0x%p.\n", + printk(KERN_INFO "axisflashmap: " + "Found a%s partition table at 0x%p-0x%p.\n", (ptable_ok ? " valid" : "n invalid"), ptable_head, max_addr); /* We have found a working bootblock. Now read the - * partition table. Scan the table. It ends when - * there is 0xffffffff, that is, empty flash. + * partition table. Scan the table. It ends with 0xffffffff. */ while (ptable_ok - && ptable->offset != 0xffffffff + && ptable->offset != PARTITIONTABLE_END_MARKER && ptable < max_addr - && pidx < MAX_PARTITIONS) { + && pidx < MAX_PARTITIONS - 1) { - axis_partitions[pidx].offset = offset + ptable->offset + (crisv32_nand_boot ? 16384 : 0); - axis_partitions[pidx].size = ptable->size; - - printk(pmsg, pidx, axis_partitions[pidx].offset, - axis_partitions[pidx].size); + axis_partitions[pidx].offset = offset + ptable->offset; +#ifdef CONFIG_ETRAX_NANDFLASH + if (main_mtd->type == MTD_NANDFLASH) { + axis_partitions[pidx].size = + (((ptable+1)->offset == + PARTITIONTABLE_END_MARKER) ? + main_mtd->size : + ((ptable+1)->offset + offset)) - + (ptable->offset + offset); + + } else +#endif /* CONFIG_ETRAX_NANDFLASH */ + axis_partitions[pidx].size = ptable->size; +#ifdef CONFIG_ETRAX_NANDBOOT + /* Save partition number of jffs2 ro partition. + * Needed if RAM booting or root file system in RAM. + */ + if (!nand_boot && + ram_rootfs_partition < 0 && /* not already set */ + ptable->type == PARTITION_TYPE_JFFS2 && + (ptable->flags & PARTITION_FLAGS_READONLY_MASK) == + PARTITION_FLAGS_READONLY) + ram_rootfs_partition = pidx; +#endif /* CONFIG_ETRAX_NANDBOOT */ pidx++; ptable++; } - use_default_ptable = !ptable_ok; } - if (romfs_in_flash) { - /* Add an overlapping device for the root partition (romfs). */ + /* Decide whether to use default partition table. */ + /* Only use default table if we actually have a device (main_mtd) */ - axis_partitions[pidx].name = "romfs"; - if (crisv32_nand_boot) { - char* data = kmalloc(1024, GFP_KERNEL); - int len; - int offset = crisv32_nand_cramfs_offset & ~(1024-1); - char* tmp; - - mymtd->read(mymtd, offset, 1024, &len, data); - tmp = &data[crisv32_nand_cramfs_offset % 512]; - axis_partitions[pidx].size = *(unsigned*)(tmp + 4); - axis_partitions[pidx].offset = crisv32_nand_cramfs_offset; - kfree(data); - } else { - axis_partitions[pidx].size = romfs_length; - axis_partitions[pidx].offset = romfs_start - FLASH_CACHED_ADDR; - } + struct mtd_partition *partition = &axis_partitions[0]; + if (main_mtd && !ptable_ok) { + memcpy(axis_partitions, axis_default_partitions, + sizeof(axis_default_partitions)); + pidx = NUM_DEFAULT_PARTITIONS; + ram_rootfs_partition = DEFAULT_ROOTFS_PARTITION_NO; + } + /* Add artificial partitions for rootfs if necessary */ + if (romfs_in_flash) { + /* rootfs is in directly accessible flash memory = NOR flash. + Add an overlapping device for the rootfs partition. */ + printk(KERN_INFO "axisflashmap: Adding partition for " + "overlapping root file system image\n"); + axis_partitions[pidx].size = romfs_length; + axis_partitions[pidx].offset = romfs_start - FLASH_CACHED_ADDR; + axis_partitions[pidx].name = "romfs"; axis_partitions[pidx].mask_flags |= MTD_WRITEABLE; - - printk(KERN_INFO - " Adding readonly flash partition for romfs image:\n"); - printk(pmsg, pidx, axis_partitions[pidx].offset, - axis_partitions[pidx].size); + ram_rootfs_partition = -1; pidx++; - } - - if (mymtd) { - if (use_default_ptable) { - printk(KERN_INFO " Using default partition table.\n"); - err = add_mtd_partitions(mymtd, axis_default_partitions, - NUM_DEFAULT_PARTITIONS); - } else { - err = add_mtd_partitions(mymtd, axis_partitions, pidx); + } else if (romfs_length && !nand_boot) { + /* romfs exists in memory, but not in flash, so must be in RAM. + * Configure an MTDRAM partition. */ + if (ram_rootfs_partition < 0) { + /* None set yet, put it at the end */ + ram_rootfs_partition = pidx; + pidx++; } + printk(KERN_INFO "axisflashmap: Adding partition for " + "root file system image in RAM\n"); + axis_partitions[ram_rootfs_partition].size = romfs_length; + axis_partitions[ram_rootfs_partition].offset = romfs_start; + axis_partitions[ram_rootfs_partition].name = "romfs"; + axis_partitions[ram_rootfs_partition].mask_flags |= + MTD_WRITEABLE; + } - if (err) { - panic("axisflashmap could not add MTD partitions!\n"); - } +#ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE + if (main_mtd) { + main_partition.size = main_mtd->size; + err = add_mtd_partitions(main_mtd, &main_partition, 1); + if (err) + panic("axisflashmap: Could not initialize " + "partition for whole main mtd device!\n"); } -/* CONFIG_EXTRAXFS_SIM */ #endif - if (!romfs_in_flash) { - /* Create an RAM device for the root partition (romfs). */ + /* Now, register all partitions with mtd. + * We do this one at a time so we can slip in an MTDRAM device + * in the proper place if required. */ + + for (part = 0; part < pidx; part++) { + if (part == ram_rootfs_partition) { + /* add MTDRAM partition here */ + struct mtd_info *mtd_ram; + + mtd_ram = kmalloc(sizeof(struct mtd_info), GFP_KERNEL); + if (!mtd_ram) + panic("axisflashmap: Couldn't allocate memory " + "for mtd_info!\n"); + printk(KERN_INFO "axisflashmap: Adding RAM partition " + "for rootfs image.\n"); + err = mtdram_init_device(mtd_ram, + (void *)partition[part].offset, + partition[part].size, + partition[part].name); + if (err) + panic("axisflashmap: Could not initialize " + "MTD RAM device!\n"); + /* JFFS2 likes to have an erasesize. Keep potential + * JFFS2 rootfs happy by providing one. Since image + * was most likely created for main mtd, use that + * erasesize, if available. Otherwise, make a guess. */ + mtd_ram->erasesize = (main_mtd ? main_mtd->erasesize : + CONFIG_ETRAX_PTABLE_SECTOR); + } else { + err = add_mtd_partitions(main_mtd, &partition[part], 1); + if (err) + panic("axisflashmap: Could not add mtd " + "partition %d\n", part); + } + } +#endif /* CONFIG_EXTRAX_VCS_SIM */ + +#ifdef CONFIG_ETRAX_VCS_SIM + /* For simulator, always use a RAM partition. + * The rootfs will be found after the kernel in RAM, + * with romfs_start and romfs_end indicating location and size. + */ + struct mtd_info *mtd_ram; + + mtd_ram = kmalloc(sizeof(struct mtd_info), GFP_KERNEL); + if (!mtd_ram) { + panic("axisflashmap: Couldn't allocate memory for " + "mtd_info!\n"); + } -#if !defined(CONFIG_MTD_MTDRAM) || (CONFIG_MTDRAM_TOTAL_SIZE != 0) || (CONFIG_MTDRAM_ABS_POS != 0) - /* No use trying to boot this kernel from RAM. Panic! */ - printk(KERN_EMERG "axisflashmap: Cannot create an MTD RAM " - "device due to kernel (mis)configuration!\n"); - panic("This kernel cannot boot from RAM!\n"); -#else - struct mtd_info *mtd_ram; + printk(KERN_INFO "axisflashmap: Adding RAM partition for romfs, " + "at %u, size %u\n", + (unsigned) romfs_start, (unsigned) romfs_length); - mtd_ram = kmalloc(sizeof(struct mtd_info), - GFP_KERNEL); - if (!mtd_ram) { - panic("axisflashmap couldn't allocate memory for " - "mtd_info!\n"); - } + err = mtdram_init_device(mtd_ram, (void *)romfs_start, + romfs_length, "romfs"); + if (err) { + panic("axisflashmap: Could not initialize MTD RAM " + "device!\n"); + } +#endif /* CONFIG_EXTRAX_VCS_SIM */ - printk(KERN_INFO " Adding RAM partition for romfs image:\n"); - printk(pmsg, pidx, romfs_start, romfs_length); +#ifndef CONFIG_ETRAX_VCS_SIM + if (aux_mtd) { + aux_partition.size = aux_mtd->size; + err = add_mtd_partitions(aux_mtd, &aux_partition, 1); + if (err) + panic("axisflashmap: Could not initialize " + "aux mtd device!\n"); - err = mtdram_init_device(mtd_ram, (void*)romfs_start, - romfs_length, "romfs"); - if (err) { - panic("axisflashmap could not initialize MTD RAM " - "device!\n"); - } -#endif } +#endif /* CONFIG_EXTRAX_VCS_SIM */ return err; } diff --git a/arch/cris/arch-v32/drivers/cryptocop.c b/arch/cris/arch-v32/drivers/cryptocop.c index e8914d401696..9fb58202be99 100644 --- a/arch/cris/arch-v32/drivers/cryptocop.c +++ b/arch/cris/arch-v32/drivers/cryptocop.c @@ -1,8 +1,7 @@ -/* $Id: cryptocop.c,v 1.13 2005/04/21 17:27:55 henriken Exp $ - * +/* * Stream co-processor driver for the ETRAX FS * - * Copyright (C) 2003-2005 Axis Communications AB + * Copyright (C) 2003-2007 Axis Communications AB */ #include <linux/init.h> @@ -25,17 +24,29 @@ #include <asm/signal.h> #include <asm/irq.h> -#include <asm/arch/dma.h> -#include <asm/arch/hwregs/dma.h> -#include <asm/arch/hwregs/reg_map.h> -#include <asm/arch/hwregs/reg_rdwr.h> -#include <asm/arch/hwregs/intr_vect_defs.h> - -#include <asm/arch/hwregs/strcop.h> -#include <asm/arch/hwregs/strcop_defs.h> -#include <asm/arch/cryptocop.h> - - +#include <dma.h> +#include <hwregs/dma.h> +#include <hwregs/reg_map.h> +#include <hwregs/reg_rdwr.h> +#include <hwregs/intr_vect_defs.h> + +#include <hwregs/strcop.h> +#include <hwregs/strcop_defs.h> +#include <cryptocop.h> + +#ifdef CONFIG_ETRAXFS +#define IN_DMA 9 +#define OUT_DMA 8 +#define IN_DMA_INST regi_dma9 +#define OUT_DMA_INST regi_dma8 +#define DMA_IRQ DMA9_INTR_VECT +#else +#define IN_DMA 3 +#define OUT_DMA 2 +#define IN_DMA_INST regi_dma3 +#define OUT_DMA_INST regi_dma2 +#define DMA_IRQ DMA3_INTR_VECT +#endif #define DESCR_ALLOC_PAD (31) @@ -1886,14 +1897,14 @@ static void cryptocop_do_tasklet(unsigned long unused) } static irqreturn_t -dma_done_interrupt(int irq, void *dev_id, struct pt_regs * regs) +dma_done_interrupt(int irq, void *dev_id) { struct cryptocop_prio_job *done_job; reg_dma_rw_ack_intr ack_intr = { .data = 1, }; - REG_WR (dma, regi_dma9, rw_ack_intr, ack_intr); + REG_WR(dma, IN_DMA_INST, rw_ack_intr, ack_intr); DEBUG(printk("cryptocop DMA done\n")); @@ -1937,7 +1948,6 @@ dma_done_interrupt(int irq, void *dev_id, struct pt_regs * regs) static int init_cryptocop(void) { unsigned long flags; - reg_intr_vect_rw_mask intr_mask; reg_dma_rw_cfg dma_cfg = {.en = 1}; reg_dma_rw_intr_mask intr_mask_in = {.data = regk_dma_yes}; /* Only want descriptor interrupts from the DMA in channel. */ reg_dma_rw_ack_intr ack_intr = {.data = 1,.in_eop = 1 }; @@ -1950,10 +1960,14 @@ static int init_cryptocop(void) .en = 1 }; - if (request_irq(DMA9_INTR_VECT, dma_done_interrupt, 0, "stream co-processor DMA", NULL)) panic("request_irq stream co-processor irq dma9"); + if (request_irq(DMA_IRQ, dma_done_interrupt, 0, + "stream co-processor DMA", NULL)) + panic("request_irq stream co-processor irq dma9"); - (void)crisv32_request_dma(8, "strcop", DMA_PANIC_ON_ERROR, 0, dma_strp); - (void)crisv32_request_dma(9, "strcop", DMA_PANIC_ON_ERROR, 0, dma_strp); + (void)crisv32_request_dma(OUT_DMA, "strcop", DMA_PANIC_ON_ERROR, + 0, dma_strp); + (void)crisv32_request_dma(IN_DMA, "strcop", DMA_PANIC_ON_ERROR, + 0, dma_strp); local_irq_save(flags); @@ -1963,24 +1977,19 @@ static int init_cryptocop(void) strcop_cfg.en = 1; REG_WR(strcop, regi_strcop, rw_cfg, strcop_cfg); - /* Enable DMA9 interrupt */ - intr_mask = REG_RD(intr_vect, regi_irq, rw_mask); - intr_mask.dma9 = 1; - REG_WR(intr_vect, regi_irq, rw_mask, intr_mask); - /* Enable DMAs. */ - REG_WR(dma, regi_dma9, rw_cfg, dma_cfg); /* input DMA */ - REG_WR(dma, regi_dma8, rw_cfg, dma_cfg); /* output DMA */ + REG_WR(dma, IN_DMA_INST, rw_cfg, dma_cfg); /* input DMA */ + REG_WR(dma, OUT_DMA_INST, rw_cfg, dma_cfg); /* output DMA */ /* Set up wordsize = 4 for DMAs. */ - DMA_WR_CMD (regi_dma8, regk_dma_set_w_size4); - DMA_WR_CMD (regi_dma9, regk_dma_set_w_size4); + DMA_WR_CMD(OUT_DMA_INST, regk_dma_set_w_size4); + DMA_WR_CMD(IN_DMA_INST, regk_dma_set_w_size4); /* Enable interrupts. */ - REG_WR(dma, regi_dma9, rw_intr_mask, intr_mask_in); + REG_WR(dma, IN_DMA_INST, rw_intr_mask, intr_mask_in); /* Clear intr ack. */ - REG_WR(dma, regi_dma9, rw_ack_intr, ack_intr); + REG_WR(dma, IN_DMA_INST, rw_ack_intr, ack_intr); local_irq_restore(flags); @@ -1991,7 +2000,6 @@ static int init_cryptocop(void) static void release_cryptocop(void) { unsigned long flags; - reg_intr_vect_rw_mask intr_mask; reg_dma_rw_cfg dma_cfg = {.en = 0}; reg_dma_rw_intr_mask intr_mask_in = {0}; reg_dma_rw_ack_intr ack_intr = {.data = 1,.in_eop = 1 }; @@ -1999,26 +2007,21 @@ static void release_cryptocop(void) local_irq_save(flags); /* Clear intr ack. */ - REG_WR(dma, regi_dma9, rw_ack_intr, ack_intr); - - /* Disable DMA9 interrupt */ - intr_mask = REG_RD(intr_vect, regi_irq, rw_mask); - intr_mask.dma9 = 0; - REG_WR(intr_vect, regi_irq, rw_mask, intr_mask); + REG_WR(dma, IN_DMA_INST, rw_ack_intr, ack_intr); /* Disable DMAs. */ - REG_WR(dma, regi_dma9, rw_cfg, dma_cfg); /* input DMA */ - REG_WR(dma, regi_dma8, rw_cfg, dma_cfg); /* output DMA */ + REG_WR(dma, IN_DMA_INST, rw_cfg, dma_cfg); /* input DMA */ + REG_WR(dma, OUT_DMA_INST, rw_cfg, dma_cfg); /* output DMA */ /* Disable interrupts. */ - REG_WR(dma, regi_dma9, rw_intr_mask, intr_mask_in); + REG_WR(dma, IN_DMA_INST, rw_intr_mask, intr_mask_in); local_irq_restore(flags); - free_irq(DMA9_INTR_VECT, NULL); + free_irq(DMA_IRQ, NULL); - (void)crisv32_free_dma(8); - (void)crisv32_free_dma(9); + (void)crisv32_free_dma(OUT_DMA); + (void)crisv32_free_dma(IN_DMA); } @@ -2076,13 +2079,13 @@ static void cryptocop_job_queue_close(void) reg_dma_rw_cfg dma_out_cfg, dma_in_cfg; /* Stop DMA. */ - dma_out_cfg = REG_RD(dma, regi_dma8, rw_cfg); + dma_out_cfg = REG_RD(dma, OUT_DMA_INST, rw_cfg); dma_out_cfg.en = regk_dma_no; - REG_WR(dma, regi_dma8, rw_cfg, dma_out_cfg); + REG_WR(dma, OUT_DMA_INST, rw_cfg, dma_out_cfg); - dma_in_cfg = REG_RD(dma, regi_dma9, rw_cfg); + dma_in_cfg = REG_RD(dma, IN_DMA_INST, rw_cfg); dma_in_cfg.en = regk_dma_no; - REG_WR(dma, regi_dma9, rw_cfg, dma_in_cfg); + REG_WR(dma, IN_DMA_INST, rw_cfg, dma_in_cfg); /* Disble the cryptocop. */ rw_cfg = REG_RD(strcop, regi_strcop, rw_cfg); @@ -2226,10 +2229,11 @@ static void cryptocop_start_job(void) &pj->iop->ctx_out, (char*)virt_to_phys(&pj->iop->ctx_out))); /* Start input DMA. */ - DMA_START_CONTEXT(regi_dma9, virt_to_phys(&pj->iop->ctx_in)); + flush_dma_context(&pj->iop->ctx_in); + DMA_START_CONTEXT(IN_DMA_INST, virt_to_phys(&pj->iop->ctx_in)); /* Start output DMA. */ - DMA_START_CONTEXT(regi_dma8, virt_to_phys(&pj->iop->ctx_out)); + DMA_START_CONTEXT(OUT_DMA_INST, virt_to_phys(&pj->iop->ctx_out)); spin_unlock_irqrestore(&running_job_lock, running_job_flags); DEBUG(printk("cryptocop_start_job: exiting\n")); diff --git a/arch/cris/arch-v32/drivers/i2c.c b/arch/cris/arch-v32/drivers/i2c.c index f1edd2e359b2..c2fb7a5c1396 100644 --- a/arch/cris/arch-v32/drivers/i2c.c +++ b/arch/cris/arch-v32/drivers/i2c.c @@ -19,10 +19,10 @@ *! *! --------------------------------------------------------------------------- *! -*! (C) Copyright 1999-2002 Axis Communications AB, LUND, SWEDEN +*! (C) Copyright 1999-2007 Axis Communications AB, LUND, SWEDEN *! *!***************************************************************************/ -/* $Id: i2c.c,v 1.2 2005/05/09 15:29:49 starvik Exp $ */ + /****************** INCLUDE FILES SECTION ***********************************/ #include <linux/module.h> @@ -79,6 +79,8 @@ static const char i2c_name[] = "i2c"; #define i2c_delay(usecs) udelay(usecs) +static DEFINE_SPINLOCK(i2c_lock); /* Protect directions etc */ + /****************** VARIABLE SECTION ************************************/ static struct crisv32_iopin cris_i2c_clk; @@ -252,6 +254,7 @@ i2c_getack(void) * generate ACK clock pulse */ i2c_clk(I2C_CLOCK_HIGH); +#if 0 /* * Use PORT PB instead of I2C * for input. (I2C not working) @@ -264,6 +267,8 @@ i2c_getack(void) i2c_data(1); i2c_disable(); i2c_dir_in(); +#endif + /* * now wait for ack */ @@ -271,11 +276,11 @@ i2c_getack(void) /* * check for ack */ - if(i2c_getbit()) + if (i2c_getbit()) ack = 0; i2c_delay(CLOCK_HIGH_TIME/2); - if(!ack){ - if(!i2c_getbit()) /* receiver pulled SDA low */ + if (!ack) { + if (!i2c_getbit()) /* receiver pulld SDA low */ ack = 1; i2c_delay(CLOCK_HIGH_TIME/2); } @@ -285,6 +290,7 @@ i2c_getack(void) * before we enable our output. If we keep data high * and enable output, we would generate a stop condition. */ +#if 0 i2c_data(I2C_DATA_LOW); /* @@ -292,6 +298,7 @@ i2c_getack(void) */ i2c_enable(); i2c_dir_out(); +#endif i2c_clk(I2C_CLOCK_LOW); i2c_delay(CLOCK_HIGH_TIME/4); /* @@ -375,6 +382,121 @@ i2c_sendnack(void) /*#--------------------------------------------------------------------------- *# +*# FUNCTION NAME: i2c_write +*# +*# DESCRIPTION : Writes a value to an I2C device +*# +*#--------------------------------------------------------------------------*/ +int +i2c_write(unsigned char theSlave, void *data, size_t nbytes) +{ + int error, cntr = 3; + unsigned char bytes_wrote = 0; + unsigned char value; + unsigned long flags; + + spin_lock_irqsave(&i2c_lock, flags); + + do { + error = 0; + + i2c_start(); + /* + * send slave address + */ + i2c_outbyte((theSlave & 0xfe)); + /* + * wait for ack + */ + if (!i2c_getack()) + error = 1; + /* + * send data + */ + for (bytes_wrote = 0; bytes_wrote < nbytes; bytes_wrote++) { + memcpy(&value, data + bytes_wrote, sizeof value); + i2c_outbyte(value); + /* + * now it's time to wait for ack + */ + if (!i2c_getack()) + error |= 4; + } + /* + * end byte stream + */ + i2c_stop(); + + } while (error && cntr--); + + i2c_delay(CLOCK_LOW_TIME); + + spin_unlock_irqrestore(&i2c_lock, flags); + + return -error; +} + +/*#--------------------------------------------------------------------------- +*# +*# FUNCTION NAME: i2c_read +*# +*# DESCRIPTION : Reads a value from an I2C device +*# +*#--------------------------------------------------------------------------*/ +int +i2c_read(unsigned char theSlave, void *data, size_t nbytes) +{ + unsigned char b = 0; + unsigned char bytes_read = 0; + int error, cntr = 3; + unsigned long flags; + + spin_lock_irqsave(&i2c_lock, flags); + + do { + error = 0; + memset(data, 0, nbytes); + /* + * generate start condition + */ + i2c_start(); + /* + * send slave address + */ + i2c_outbyte((theSlave | 0x01)); + /* + * wait for ack + */ + if (!i2c_getack()) + error = 1; + /* + * fetch data + */ + for (bytes_read = 0; bytes_read < nbytes; bytes_read++) { + b = i2c_inbyte(); + memcpy(data + bytes_read, &b, sizeof b); + + if (bytes_read < (nbytes - 1)) + i2c_sendack(); + } + /* + * last received byte needs to be nacked + * instead of acked + */ + i2c_sendnack(); + /* + * end sequence + */ + i2c_stop(); + } while (error && cntr--); + + spin_unlock_irqrestore(&i2c_lock, flags); + + return -error; +} + +/*#--------------------------------------------------------------------------- +*# *# FUNCTION NAME: i2c_writereg *# *# DESCRIPTION : Writes a value to an I2C device @@ -387,12 +509,10 @@ i2c_writereg(unsigned char theSlave, unsigned char theReg, int error, cntr = 3; unsigned long flags; + spin_lock_irqsave(&i2c_lock, flags); + do { error = 0; - /* - * we don't like to be interrupted - */ - local_irq_save(flags); i2c_start(); /* @@ -427,15 +547,12 @@ i2c_writereg(unsigned char theSlave, unsigned char theReg, * end byte stream */ i2c_stop(); - /* - * enable interrupt again - */ - local_irq_restore(flags); - } while(error && cntr--); i2c_delay(CLOCK_LOW_TIME); + spin_unlock_irqrestore(&i2c_lock, flags); + return -error; } @@ -453,13 +570,11 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg) int error, cntr = 3; unsigned long flags; + spin_lock_irqsave(&i2c_lock, flags); + do { error = 0; /* - * we don't like to be interrupted - */ - local_irq_save(flags); - /* * generate start condition */ i2c_start(); @@ -482,7 +597,7 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg) * now it's time to wait for ack */ if(!i2c_getack()) - error = 1; + error |= 2; /* * repeat start condition */ @@ -496,7 +611,7 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg) * wait for ack */ if(!i2c_getack()) - error = 1; + error |= 4; /* * fetch register */ @@ -510,13 +625,11 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg) * end sequence */ i2c_stop(); - /* - * enable interrupt again - */ - local_irq_restore(flags); } while(error && cntr--); + spin_unlock_irqrestore(&i2c_lock, flags); + return b; } @@ -540,7 +653,7 @@ i2c_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { if(_IOC_TYPE(cmd) != ETRAXI2C_IOCTYPE) { - return -EINVAL; + return -ENOTTY; } switch (_IOC_NR(cmd)) { @@ -580,31 +693,52 @@ static const struct file_operations i2c_fops = { .release = i2c_release, }; -int __init -i2c_init(void) +static int __init i2c_init(void) { - int res; + static int res; + static int first = 1; - /* Setup and enable the Port B I2C interface */ + if (!first) + return res; - crisv32_io_get_name(&cris_i2c_data, CONFIG_ETRAX_I2C_DATA_PORT); - crisv32_io_get_name(&cris_i2c_clk, CONFIG_ETRAX_I2C_CLK_PORT); + first = 0; + + /* Setup and enable the DATA and CLK pins */ + + res = crisv32_io_get_name(&cris_i2c_data, + CONFIG_ETRAX_V32_I2C_DATA_PORT); + if (res < 0) + return res; + + res = crisv32_io_get_name(&cris_i2c_clk, CONFIG_ETRAX_V32_I2C_CLK_PORT); + crisv32_io_set_dir(&cris_i2c_clk, crisv32_io_dir_out); + + return res; +} + + +static int __init i2c_register(void) +{ + int res; + + res = i2c_init(); + if (res < 0) + return res; /* register char device */ res = register_chrdev(I2C_MAJOR, i2c_name, &i2c_fops); - if(res < 0) { + if (res < 0) { printk(KERN_ERR "i2c: couldn't get a major number.\n"); return res; } - printk(KERN_INFO "I2C driver v2.2, (c) 1999-2001 Axis Communications AB\n"); + printk(KERN_INFO + "I2C driver v2.2, (c) 1999-2007 Axis Communications AB\n"); return 0; } - /* this makes sure that i2c_init is called during boot */ - -module_init(i2c_init); +module_init(i2c_register); /****************** END OF FILE i2c.c ********************************/ diff --git a/arch/cris/arch-v32/drivers/i2c.h b/arch/cris/arch-v32/drivers/i2c.h index bfe1a13f9f35..c073cf4ba016 100644 --- a/arch/cris/arch-v32/drivers/i2c.h +++ b/arch/cris/arch-v32/drivers/i2c.h @@ -3,6 +3,8 @@ /* High level I2C actions */ int __init i2c_init(void); +int i2c_write(unsigned char theSlave, void *data, size_t nbytes); +int i2c_read(unsigned char theSlave, void *data, size_t nbytes); int i2c_writereg(unsigned char theSlave, unsigned char theReg, unsigned char theValue); unsigned char i2c_readreg(unsigned char theSlave, unsigned char theReg); diff --git a/arch/cris/arch-v32/drivers/iop_fw_load.c b/arch/cris/arch-v32/drivers/iop_fw_load.c index f4bdc1dfa320..3b3857ec1f15 100644 --- a/arch/cris/arch-v32/drivers/iop_fw_load.c +++ b/arch/cris/arch-v32/drivers/iop_fw_load.c @@ -1,5 +1,4 @@ -/* $Id: iop_fw_load.c,v 1.4 2005/04/07 09:27:46 larsv Exp $ - * +/* * Firmware loader for ETRAX FS IO-Processor * * Copyright (C) 2004 Axis Communications AB @@ -11,12 +10,13 @@ #include <linux/device.h> #include <linux/firmware.h> -#include <asm/arch/hwregs/reg_map.h> -#include <asm/arch/hwregs/iop/iop_reg_space.h> -#include <asm/arch/hwregs/iop/iop_mpu_macros.h> -#include <asm/arch/hwregs/iop/iop_mpu_defs.h> -#include <asm/arch/hwregs/iop/iop_spu_defs.h> -#include <asm/arch/hwregs/iop/iop_sw_cpu_defs.h> +#include <hwregs/reg_rdwr.h> +#include <hwregs/reg_map.h> +#include <hwregs/iop/iop_reg_space.h> +#include <hwregs/iop/iop_mpu_macros.h> +#include <hwregs/iop/iop_mpu_defs.h> +#include <hwregs/iop/iop_spu_defs.h> +#include <hwregs/iop/iop_sw_cpu_defs.h> #define IOP_TIMEOUT 100 diff --git a/arch/cris/arch-v32/drivers/mach-a3/Makefile b/arch/cris/arch-v32/drivers/mach-a3/Makefile new file mode 100644 index 000000000000..5c6d2a2a080e --- /dev/null +++ b/arch/cris/arch-v32/drivers/mach-a3/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for Etrax-specific drivers +# + +obj-$(CONFIG_ETRAX_NANDFLASH) += nandflash.o +obj-$(CONFIG_ETRAX_GPIO) += gpio.o diff --git a/arch/cris/arch-v32/drivers/mach-a3/gpio.c b/arch/cris/arch-v32/drivers/mach-a3/gpio.c new file mode 100644 index 000000000000..de107dad9f4f --- /dev/null +++ b/arch/cris/arch-v32/drivers/mach-a3/gpio.c @@ -0,0 +1,984 @@ +/* + * Artec-3 general port I/O device + * + * Copyright (c) 2007 Axis Communications AB + * + * Authors: Bjorn Wesen (initial version) + * Ola Knutsson (LED handling) + * Johan Adolfsson (read/set directions, write, port G, + * port to ETRAX FS. + * Ricard Wanderlof (PWM for Artpec-3) + * + */ + +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/ioport.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/fs.h> +#include <linux/string.h> +#include <linux/poll.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> + +#include <asm/etraxgpio.h> +#include <hwregs/reg_map.h> +#include <hwregs/reg_rdwr.h> +#include <hwregs/gio_defs.h> +#include <hwregs/intr_vect_defs.h> +#include <asm/io.h> +#include <asm/system.h> +#include <asm/irq.h> +#include <asm/arch/mach/pinmux.h> + +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO +#include "../i2c.h" + +#define VIRT_I2C_ADDR 0x40 +#endif + +/* The following gio ports on ARTPEC-3 is available: + * pa 32 bits + * pb 32 bits + * pc 16 bits + * each port has a rw_px_dout, r_px_din and rw_px_oe register. + */ + +#define GPIO_MAJOR 120 /* experimental MAJOR number */ + +#define I2C_INTERRUPT_BITS 0x300 /* i2c0_done and i2c1_done bits */ + +#define D(x) + +#if 0 +static int dp_cnt; +#define DP(x) \ + do { \ + dp_cnt++; \ + if (dp_cnt % 1000 == 0) \ + x; \ + } while (0) +#else +#define DP(x) +#endif + +static char gpio_name[] = "etrax gpio"; + +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO +static int virtual_gpio_ioctl(struct file *file, unsigned int cmd, + unsigned long arg); +#endif +static int gpio_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg); +static ssize_t gpio_write(struct file *file, const char __user *buf, + size_t count, loff_t *off); +static int gpio_open(struct inode *inode, struct file *filp); +static int gpio_release(struct inode *inode, struct file *filp); +static unsigned int gpio_poll(struct file *filp, + struct poll_table_struct *wait); + +/* private data per open() of this driver */ + +struct gpio_private { + struct gpio_private *next; + /* The IO_CFG_WRITE_MODE_VALUE only support 8 bits: */ + unsigned char clk_mask; + unsigned char data_mask; + unsigned char write_msb; + unsigned char pad1; + /* These fields are generic */ + unsigned long highalarm, lowalarm; + wait_queue_head_t alarm_wq; + int minor; +}; + +static void gpio_set_alarm(struct gpio_private *priv); +static int gpio_leds_ioctl(unsigned int cmd, unsigned long arg); +static int gpio_pwm_ioctl(struct gpio_private *priv, unsigned int cmd, + unsigned long arg); + + +/* linked list of alarms to check for */ + +static struct gpio_private *alarmlist; + +static int wanted_interrupts; + +static DEFINE_SPINLOCK(gpio_lock); + +#define NUM_PORTS (GPIO_MINOR_LAST+1) +#define GIO_REG_RD_ADDR(reg) \ + (unsigned long *)(regi_gio + REG_RD_ADDR_gio_##reg) +#define GIO_REG_WR_ADDR(reg) \ + (unsigned long *)(regi_gio + REG_WR_ADDR_gio_##reg) +static unsigned long led_dummy; +static unsigned long port_d_dummy; /* Only input on Artpec-3 */ +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO +static unsigned long port_e_dummy; /* Non existent on Artpec-3 */ +static unsigned long virtual_dummy; +static unsigned long virtual_rw_pv_oe = CONFIG_ETRAX_DEF_GIO_PV_OE; +static unsigned short cached_virtual_gpio_read; +#endif + +static unsigned long *data_out[NUM_PORTS] = { + GIO_REG_WR_ADDR(rw_pa_dout), + GIO_REG_WR_ADDR(rw_pb_dout), + &led_dummy, + GIO_REG_WR_ADDR(rw_pc_dout), + &port_d_dummy, +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO + &port_e_dummy, + &virtual_dummy, +#endif +}; + +static unsigned long *data_in[NUM_PORTS] = { + GIO_REG_RD_ADDR(r_pa_din), + GIO_REG_RD_ADDR(r_pb_din), + &led_dummy, + GIO_REG_RD_ADDR(r_pc_din), + GIO_REG_RD_ADDR(r_pd_din), +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO + &port_e_dummy, + &virtual_dummy, +#endif +}; + +static unsigned long changeable_dir[NUM_PORTS] = { + CONFIG_ETRAX_PA_CHANGEABLE_DIR, + CONFIG_ETRAX_PB_CHANGEABLE_DIR, + 0, + CONFIG_ETRAX_PC_CHANGEABLE_DIR, + 0, +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO + 0, + CONFIG_ETRAX_PV_CHANGEABLE_DIR, +#endif +}; + +static unsigned long changeable_bits[NUM_PORTS] = { + CONFIG_ETRAX_PA_CHANGEABLE_BITS, + CONFIG_ETRAX_PB_CHANGEABLE_BITS, + 0, + CONFIG_ETRAX_PC_CHANGEABLE_BITS, + 0, +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO + 0, + CONFIG_ETRAX_PV_CHANGEABLE_BITS, +#endif +}; + +static unsigned long *dir_oe[NUM_PORTS] = { + GIO_REG_WR_ADDR(rw_pa_oe), + GIO_REG_WR_ADDR(rw_pb_oe), + &led_dummy, + GIO_REG_WR_ADDR(rw_pc_oe), + &port_d_dummy, +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO + &port_e_dummy, + &virtual_rw_pv_oe, +#endif +}; + +static void gpio_set_alarm(struct gpio_private *priv) +{ + int bit; + int intr_cfg; + int mask; + int pins; + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + intr_cfg = REG_RD_INT(gio, regi_gio, rw_intr_cfg); + pins = REG_RD_INT(gio, regi_gio, rw_intr_pins); + mask = REG_RD_INT(gio, regi_gio, rw_intr_mask) & I2C_INTERRUPT_BITS; + + for (bit = 0; bit < 32; bit++) { + int intr = bit % 8; + int pin = bit / 8; + if (priv->minor < GPIO_MINOR_LEDS) + pin += priv->minor * 4; + else + pin += (priv->minor - 1) * 4; + + if (priv->highalarm & (1<<bit)) { + intr_cfg |= (regk_gio_hi << (intr * 3)); + mask |= 1 << intr; + wanted_interrupts = mask & 0xff; + pins |= pin << (intr * 4); + } else if (priv->lowalarm & (1<<bit)) { + intr_cfg |= (regk_gio_lo << (intr * 3)); + mask |= 1 << intr; + wanted_interrupts = mask & 0xff; + pins |= pin << (intr * 4); + } + } + + REG_WR_INT(gio, regi_gio, rw_intr_cfg, intr_cfg); + REG_WR_INT(gio, regi_gio, rw_intr_pins, pins); + REG_WR_INT(gio, regi_gio, rw_intr_mask, mask); + + spin_unlock_irqrestore(&gpio_lock, flags); +} + +static unsigned int gpio_poll(struct file *file, struct poll_table_struct *wait) +{ + unsigned int mask = 0; + struct gpio_private *priv = file->private_data; + unsigned long data; + unsigned long tmp; + + if (priv->minor >= GPIO_MINOR_PWM0 && + priv->minor <= GPIO_MINOR_LAST_PWM) + return 0; + + poll_wait(file, &priv->alarm_wq, wait); + if (priv->minor <= GPIO_MINOR_D) { + data = readl(data_in[priv->minor]); + REG_WR_INT(gio, regi_gio, rw_ack_intr, wanted_interrupts); + tmp = REG_RD_INT(gio, regi_gio, rw_intr_mask); + tmp &= I2C_INTERRUPT_BITS; + tmp |= wanted_interrupts; + REG_WR_INT(gio, regi_gio, rw_intr_mask, tmp); + } else + return 0; + + if ((data & priv->highalarm) || (~data & priv->lowalarm)) + mask = POLLIN|POLLRDNORM; + + DP(printk(KERN_DEBUG "gpio_poll ready: mask 0x%08X\n", mask)); + return mask; +} + +static irqreturn_t gpio_interrupt(int irq, void *dev_id) +{ + reg_gio_rw_intr_mask intr_mask; + reg_gio_r_masked_intr masked_intr; + reg_gio_rw_ack_intr ack_intr; + unsigned long flags; + unsigned long tmp; + unsigned long tmp2; +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO + unsigned char enable_gpiov_ack = 0; +#endif + + /* Find what PA interrupts are active */ + masked_intr = REG_RD(gio, regi_gio, r_masked_intr); + tmp = REG_TYPE_CONV(unsigned long, reg_gio_r_masked_intr, masked_intr); + + /* Find those that we have enabled */ + spin_lock_irqsave(&gpio_lock, flags); + tmp &= wanted_interrupts; + spin_unlock_irqrestore(&gpio_lock, flags); + +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO + /* Something changed on virtual GPIO. Interrupt is acked by + * reading the device. + */ + if (tmp & (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN)) { + i2c_read(VIRT_I2C_ADDR, (void *)&cached_virtual_gpio_read, + sizeof(cached_virtual_gpio_read)); + enable_gpiov_ack = 1; + } +#endif + + /* Ack them */ + ack_intr = REG_TYPE_CONV(reg_gio_rw_ack_intr, unsigned long, tmp); + REG_WR(gio, regi_gio, rw_ack_intr, ack_intr); + + /* Disable those interrupts.. */ + intr_mask = REG_RD(gio, regi_gio, rw_intr_mask); + tmp2 = REG_TYPE_CONV(unsigned long, reg_gio_rw_intr_mask, intr_mask); + tmp2 &= ~tmp; +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO + /* Do not disable interrupt on virtual GPIO. Changes on virtual + * pins are only noticed by an interrupt. + */ + if (enable_gpiov_ack) + tmp2 |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); +#endif + intr_mask = REG_TYPE_CONV(reg_gio_rw_intr_mask, unsigned long, tmp2); + REG_WR(gio, regi_gio, rw_intr_mask, intr_mask); + + return IRQ_RETVAL(tmp); +} + +static void gpio_write_bit(unsigned long *port, unsigned char data, int bit, + unsigned char clk_mask, unsigned char data_mask) +{ + unsigned long shadow = readl(port) & ~clk_mask; + writel(shadow, port); + if (data & 1 << bit) + shadow |= data_mask; + else + shadow &= ~data_mask; + writel(shadow, port); + /* For FPGA: min 5.0ns (DCC) before CCLK high */ + shadow |= clk_mask; + writel(shadow, port); +} + +static void gpio_write_byte(struct gpio_private *priv, unsigned long *port, + unsigned char data) +{ + int i; + + if (priv->write_msb) + for (i = 7; i >= 0; i--) + gpio_write_bit(port, data, i, priv->clk_mask, + priv->data_mask); + else + for (i = 0; i <= 7; i++) + gpio_write_bit(port, data, i, priv->clk_mask, + priv->data_mask); +} + + +static ssize_t gpio_write(struct file *file, const char __user *buf, + size_t count, loff_t *off) +{ + struct gpio_private *priv = file->private_data; + unsigned long flags; + ssize_t retval = count; + /* Only bits 0-7 may be used for write operations but allow all + devices except leds... */ +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO + if (priv->minor == GPIO_MINOR_V) + return -EFAULT; +#endif + if (priv->minor == GPIO_MINOR_LEDS) + return -EFAULT; + + if (priv->minor >= GPIO_MINOR_PWM0 && + priv->minor <= GPIO_MINOR_LAST_PWM) + return -EFAULT; + + if (!access_ok(VERIFY_READ, buf, count)) + return -EFAULT; + + /* It must have been configured using the IO_CFG_WRITE_MODE */ + /* Perhaps a better error code? */ + if (priv->clk_mask == 0 || priv->data_mask == 0) + return -EPERM; + + D(printk(KERN_DEBUG "gpio_write: %lu to data 0x%02X clk 0x%02X " + "msb: %i\n", + count, priv->data_mask, priv->clk_mask, priv->write_msb)); + + spin_lock_irqsave(&gpio_lock, flags); + + while (count--) + gpio_write_byte(priv, data_out[priv->minor], *buf++); + + spin_unlock_irqrestore(&gpio_lock, flags); + return retval; +} + +static int gpio_open(struct inode *inode, struct file *filp) +{ + struct gpio_private *priv; + int p = iminor(inode); + + if (p > GPIO_MINOR_LAST_PWM || + (p > GPIO_MINOR_LAST && p < GPIO_MINOR_PWM0)) + return -EINVAL; + + priv = kmalloc(sizeof(struct gpio_private), GFP_KERNEL); + + if (!priv) + return -ENOMEM; + memset(priv, 0, sizeof(*priv)); + + priv->minor = p; + filp->private_data = priv; + + /* initialize the io/alarm struct, not for PWM ports though */ + if (p <= GPIO_MINOR_LAST) { + + priv->clk_mask = 0; + priv->data_mask = 0; + priv->highalarm = 0; + priv->lowalarm = 0; + + init_waitqueue_head(&priv->alarm_wq); + + /* link it into our alarmlist */ + spin_lock_irq(&gpio_lock); + priv->next = alarmlist; + alarmlist = priv; + spin_unlock_irq(&gpio_lock); + } + + return 0; +} + +static int gpio_release(struct inode *inode, struct file *filp) +{ + struct gpio_private *p; + struct gpio_private *todel; + /* local copies while updating them: */ + unsigned long a_high, a_low; + + /* prepare to free private structure */ + todel = filp->private_data; + + /* unlink from alarmlist - only for non-PWM ports though */ + if (todel->minor <= GPIO_MINOR_LAST) { + spin_lock_irq(&gpio_lock); + p = alarmlist; + + if (p == todel) + alarmlist = todel->next; + else { + while (p->next != todel) + p = p->next; + p->next = todel->next; + } + + /* Check if there are still any alarms set */ + p = alarmlist; + a_high = 0; + a_low = 0; + while (p) { + if (p->minor == GPIO_MINOR_A) { +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO + p->lowalarm |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); +#endif + a_high |= p->highalarm; + a_low |= p->lowalarm; + } + + p = p->next; + } + +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO + /* Variable 'a_low' needs to be set here again + * to ensure that interrupt for virtual GPIO is handled. + */ + a_low |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); +#endif + + spin_unlock_irq(&gpio_lock); + } + kfree(todel); + + return 0; +} + +/* Main device API. ioctl's to read/set/clear bits, as well as to + * set alarms to wait for using a subsequent select(). + */ + +inline unsigned long setget_input(struct gpio_private *priv, unsigned long arg) +{ + /* Set direction 0=unchanged 1=input, + * return mask with 1=input + */ + unsigned long flags; + unsigned long dir_shadow; + + spin_lock_irqsave(&gpio_lock, flags); + + dir_shadow = readl(dir_oe[priv->minor]) & + ~(arg & changeable_dir[priv->minor]); + writel(dir_shadow, dir_oe[priv->minor]); + + spin_unlock_irqrestore(&gpio_lock, flags); + + if (priv->minor == GPIO_MINOR_C) + dir_shadow ^= 0xFFFF; /* Only 16 bits */ +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO + else if (priv->minor == GPIO_MINOR_V) + dir_shadow ^= 0xFFFF; /* Only 16 bits */ +#endif + else + dir_shadow ^= 0xFFFFFFFF; /* PA, PB and PD 32 bits */ + + return dir_shadow; + +} /* setget_input */ + +static inline unsigned long setget_output(struct gpio_private *priv, + unsigned long arg) +{ + unsigned long flags; + unsigned long dir_shadow; + + spin_lock_irqsave(&gpio_lock, flags); + + dir_shadow = readl(dir_oe[priv->minor]) | + (arg & changeable_dir[priv->minor]); + writel(dir_shadow, dir_oe[priv->minor]); + + spin_unlock_irqrestore(&gpio_lock, flags); + return dir_shadow; +} /* setget_output */ + +static int gpio_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + unsigned long flags; + unsigned long val; + unsigned long shadow; + struct gpio_private *priv = file->private_data; + + if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE) + return -ENOTTY; + + /* Check for special ioctl handlers first */ + +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO + if (priv->minor == GPIO_MINOR_V) + return virtual_gpio_ioctl(file, cmd, arg); +#endif + + if (priv->minor == GPIO_MINOR_LEDS) + return gpio_leds_ioctl(cmd, arg); + + if (priv->minor >= GPIO_MINOR_PWM0 && + priv->minor <= GPIO_MINOR_LAST_PWM) + return gpio_pwm_ioctl(priv, cmd, arg); + + switch (_IOC_NR(cmd)) { + case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */ + /* Read the port. */ + return readl(data_in[priv->minor]); + case IO_SETBITS: + spin_lock_irqsave(&gpio_lock, flags); + /* Set changeable bits with a 1 in arg. */ + shadow = readl(data_out[priv->minor]) | + (arg & changeable_bits[priv->minor]); + writel(shadow, data_out[priv->minor]); + spin_unlock_irqrestore(&gpio_lock, flags); + break; + case IO_CLRBITS: + spin_lock_irqsave(&gpio_lock, flags); + /* Clear changeable bits with a 1 in arg. */ + shadow = readl(data_out[priv->minor]) & + ~(arg & changeable_bits[priv->minor]); + writel(shadow, data_out[priv->minor]); + spin_unlock_irqrestore(&gpio_lock, flags); + break; + case IO_HIGHALARM: + /* Set alarm when bits with 1 in arg go high. */ + priv->highalarm |= arg; + gpio_set_alarm(priv); + break; + case IO_LOWALARM: + /* Set alarm when bits with 1 in arg go low. */ + priv->lowalarm |= arg; + gpio_set_alarm(priv); + break; + case IO_CLRALARM: + /* Clear alarm for bits with 1 in arg. */ + priv->highalarm &= ~arg; + priv->lowalarm &= ~arg; + gpio_set_alarm(priv); + break; + case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */ + /* Read direction 0=input 1=output */ + return readl(dir_oe[priv->minor]); + + case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */ + /* Set direction 0=unchanged 1=input, + * return mask with 1=input + */ + return setget_input(priv, arg); + + case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */ + /* Set direction 0=unchanged 1=output, + * return mask with 1=output + */ + return setget_output(priv, arg); + + case IO_CFG_WRITE_MODE: + { + int res = -EPERM; + unsigned long dir_shadow, clk_mask, data_mask, write_msb; + + clk_mask = arg & 0xFF; + data_mask = (arg >> 8) & 0xFF; + write_msb = (arg >> 16) & 0x01; + + /* Check if we're allowed to change the bits and + * the direction is correct + */ + spin_lock_irqsave(&gpio_lock, flags); + dir_shadow = readl(dir_oe[priv->minor]); + if ((clk_mask & changeable_bits[priv->minor]) && + (data_mask & changeable_bits[priv->minor]) && + (clk_mask & dir_shadow) && + (data_mask & dir_shadow)) { + priv->clk_mask = clk_mask; + priv->data_mask = data_mask; + priv->write_msb = write_msb; + res = 0; + } + spin_unlock_irqrestore(&gpio_lock, flags); + + return res; + } + case IO_READ_INBITS: + /* *arg is result of reading the input pins */ + val = readl(data_in[priv->minor]); + if (copy_to_user((void __user *)arg, &val, sizeof(val))) + return -EFAULT; + return 0; + case IO_READ_OUTBITS: + /* *arg is result of reading the output shadow */ + val = *data_out[priv->minor]; + if (copy_to_user((void __user *)arg, &val, sizeof(val))) + return -EFAULT; + break; + case IO_SETGET_INPUT: + /* bits set in *arg is set to input, + * *arg updated with current input pins. + */ + if (copy_from_user(&val, (void __user *)arg, sizeof(val))) + return -EFAULT; + val = setget_input(priv, val); + if (copy_to_user((void __user *)arg, &val, sizeof(val))) + return -EFAULT; + break; + case IO_SETGET_OUTPUT: + /* bits set in *arg is set to output, + * *arg updated with current output pins. + */ + if (copy_from_user(&val, (void __user *)arg, sizeof(val))) + return -EFAULT; + val = setget_output(priv, val); + if (copy_to_user((void __user *)arg, &val, sizeof(val))) + return -EFAULT; + break; + default: + return -EINVAL; + } /* switch */ + + return 0; +} + +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO +static int virtual_gpio_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + unsigned long flags; + unsigned short val; + unsigned short shadow; + struct gpio_private *priv = file->private_data; + + switch (_IOC_NR(cmd)) { + case IO_SETBITS: + spin_lock_irqsave(&gpio_lock, flags); + /* Set changeable bits with a 1 in arg. */ + i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); + shadow |= ~readl(dir_oe[priv->minor]) | + (arg & changeable_bits[priv->minor]); + i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); + spin_lock_irqrestore(&gpio_lock, flags); + break; + case IO_CLRBITS: + spin_lock_irqsave(&gpio_lock, flags); + /* Clear changeable bits with a 1 in arg. */ + i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); + shadow |= ~readl(dir_oe[priv->minor]) & + ~(arg & changeable_bits[priv->minor]); + i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); + spin_lock_irqrestore(&gpio_lock, flags); + break; + case IO_HIGHALARM: + /* Set alarm when bits with 1 in arg go high. */ + priv->highalarm |= arg; + break; + case IO_LOWALARM: + /* Set alarm when bits with 1 in arg go low. */ + priv->lowalarm |= arg; + break; + case IO_CLRALARM: + /* Clear alarm for bits with 1 in arg. */ + priv->highalarm &= ~arg; + priv->lowalarm &= ~arg; + break; + case IO_CFG_WRITE_MODE: + { + unsigned long dir_shadow; + dir_shadow = readl(dir_oe[priv->minor]); + + priv->clk_mask = arg & 0xFF; + priv->data_mask = (arg >> 8) & 0xFF; + priv->write_msb = (arg >> 16) & 0x01; + /* Check if we're allowed to change the bits and + * the direction is correct + */ + if (!((priv->clk_mask & changeable_bits[priv->minor]) && + (priv->data_mask & changeable_bits[priv->minor]) && + (priv->clk_mask & dir_shadow) && + (priv->data_mask & dir_shadow))) { + priv->clk_mask = 0; + priv->data_mask = 0; + return -EPERM; + } + break; + } + case IO_READ_INBITS: + /* *arg is result of reading the input pins */ + val = cached_virtual_gpio_read & ~readl(dir_oe[priv->minor]); + if (copy_to_user((void __user *)arg, &val, sizeof(val))) + return -EFAULT; + return 0; + + case IO_READ_OUTBITS: + /* *arg is result of reading the output shadow */ + i2c_read(VIRT_I2C_ADDR, (void *)&val, sizeof(val)); + val &= readl(dir_oe[priv->minor]); + if (copy_to_user((void __user *)arg, &val, sizeof(val))) + return -EFAULT; + break; + case IO_SETGET_INPUT: + { + /* bits set in *arg is set to input, + * *arg updated with current input pins. + */ + unsigned short input_mask = ~readl(dir_oe[priv->minor]); + if (copy_from_user(&val, (void __user *)arg, sizeof(val))) + return -EFAULT; + val = setget_input(priv, val); + if (copy_to_user((void __user *)arg, &val, sizeof(val))) + return -EFAULT; + if ((input_mask & val) != input_mask) { + /* Input pins changed. All ports desired as input + * should be set to logic 1. + */ + unsigned short change = input_mask ^ val; + i2c_read(VIRT_I2C_ADDR, (void *)&shadow, + sizeof(shadow)); + shadow &= ~change; + shadow |= val; + i2c_write(VIRT_I2C_ADDR, (void *)&shadow, + sizeof(shadow)); + } + break; + } + case IO_SETGET_OUTPUT: + /* bits set in *arg is set to output, + * *arg updated with current output pins. + */ + if (copy_from_user(&val, (void __user *)arg, sizeof(val))) + return -EFAULT; + val = setget_output(priv, val); + if (copy_to_user((void __user *)arg, &val, sizeof(val))) + return -EFAULT; + break; + default: + return -EINVAL; + } /* switch */ + return 0; +} +#endif /* CONFIG_ETRAX_VIRTUAL_GPIO */ + +static int gpio_leds_ioctl(unsigned int cmd, unsigned long arg) +{ + unsigned char green; + unsigned char red; + + switch (_IOC_NR(cmd)) { + case IO_LEDACTIVE_SET: + green = ((unsigned char) arg) & 1; + red = (((unsigned char) arg) >> 1) & 1; + CRIS_LED_ACTIVE_SET_G(green); + CRIS_LED_ACTIVE_SET_R(red); + break; + + default: + return -EINVAL; + } /* switch */ + + return 0; +} + +static int gpio_pwm_set_mode(unsigned long arg, int pwm_port) +{ + int pinmux_pwm = pinmux_pwm0 + pwm_port; + int mode; + reg_gio_rw_pwm0_ctrl rw_pwm_ctrl = { + .ccd_val = 0, + .ccd_override = regk_gio_no, + .mode = regk_gio_no + }; + int allocstatus; + + if (get_user(mode, &((struct io_pwm_set_mode *) arg)->mode)) + return -EFAULT; + rw_pwm_ctrl.mode = mode; + if (mode != PWM_OFF) + allocstatus = crisv32_pinmux_alloc_fixed(pinmux_pwm); + else + allocstatus = crisv32_pinmux_dealloc_fixed(pinmux_pwm); + if (allocstatus) + return allocstatus; + REG_WRITE(reg_gio_rw_pwm0_ctrl, REG_ADDR(gio, regi_gio, rw_pwm0_ctrl) + + 12 * pwm_port, rw_pwm_ctrl); + return 0; +} + +static int gpio_pwm_set_period(unsigned long arg, int pwm_port) +{ + struct io_pwm_set_period periods; + reg_gio_rw_pwm0_var rw_pwm_widths; + + if (copy_from_user(&periods, (void __user *)arg, sizeof(periods))) + return -EFAULT; + if (periods.lo > 8191 || periods.hi > 8191) + return -EINVAL; + rw_pwm_widths.lo = periods.lo; + rw_pwm_widths.hi = periods.hi; + REG_WRITE(reg_gio_rw_pwm0_var, REG_ADDR(gio, regi_gio, rw_pwm0_var) + + 12 * pwm_port, rw_pwm_widths); + return 0; +} + +static int gpio_pwm_set_duty(unsigned long arg, int pwm_port) +{ + unsigned int duty; + reg_gio_rw_pwm0_data rw_pwm_duty; + + if (get_user(duty, &((struct io_pwm_set_duty *) arg)->duty)) + return -EFAULT; + if (duty > 255) + return -EINVAL; + rw_pwm_duty.data = duty; + REG_WRITE(reg_gio_rw_pwm0_data, REG_ADDR(gio, regi_gio, rw_pwm0_data) + + 12 * pwm_port, rw_pwm_duty); + return 0; +} + +static int gpio_pwm_ioctl(struct gpio_private *priv, unsigned int cmd, + unsigned long arg) +{ + int pwm_port = priv->minor - GPIO_MINOR_PWM0; + + switch (_IOC_NR(cmd)) { + case IO_PWM_SET_MODE: + return gpio_pwm_set_mode(arg, pwm_port); + case IO_PWM_SET_PERIOD: + return gpio_pwm_set_period(arg, pwm_port); + case IO_PWM_SET_DUTY: + return gpio_pwm_set_duty(arg, pwm_port); + default: + return -EINVAL; + } + return 0; +} + +static const struct file_operations gpio_fops = { + .owner = THIS_MODULE, + .poll = gpio_poll, + .ioctl = gpio_ioctl, + .write = gpio_write, + .open = gpio_open, + .release = gpio_release, +}; + +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO +static void __init virtual_gpio_init(void) +{ + reg_gio_rw_intr_cfg intr_cfg; + reg_gio_rw_intr_mask intr_mask; + unsigned short shadow; + + shadow = ~virtual_rw_pv_oe; /* Input ports should be set to logic 1 */ + shadow |= CONFIG_ETRAX_DEF_GIO_PV_OUT; + i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); + + /* Set interrupt mask and on what state the interrupt shall trigger. + * For virtual gpio the interrupt shall trigger on logic '0'. + */ + intr_cfg = REG_RD(gio, regi_gio, rw_intr_cfg); + intr_mask = REG_RD(gio, regi_gio, rw_intr_mask); + + switch (CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN) { + case 0: + intr_cfg.pa0 = regk_gio_lo; + intr_mask.pa0 = regk_gio_yes; + break; + case 1: + intr_cfg.pa1 = regk_gio_lo; + intr_mask.pa1 = regk_gio_yes; + break; + case 2: + intr_cfg.pa2 = regk_gio_lo; + intr_mask.pa2 = regk_gio_yes; + break; + case 3: + intr_cfg.pa3 = regk_gio_lo; + intr_mask.pa3 = regk_gio_yes; + break; + case 4: + intr_cfg.pa4 = regk_gio_lo; + intr_mask.pa4 = regk_gio_yes; + break; + case 5: + intr_cfg.pa5 = regk_gio_lo; + intr_mask.pa5 = regk_gio_yes; + break; + case 6: + intr_cfg.pa6 = regk_gio_lo; + intr_mask.pa6 = regk_gio_yes; + break; + case 7: + intr_cfg.pa7 = regk_gio_lo; + intr_mask.pa7 = regk_gio_yes; + break; + } + + REG_WR(gio, regi_gio, rw_intr_cfg, intr_cfg); + REG_WR(gio, regi_gio, rw_intr_mask, intr_mask); +} +#endif + +/* main driver initialization routine, called from mem.c */ + +static int __init gpio_init(void) +{ + int res; + + printk(KERN_INFO "ETRAX FS GPIO driver v2.7, (c) 2003-2008 " + "Axis Communications AB\n"); + + /* do the formalities */ + + res = register_chrdev(GPIO_MAJOR, gpio_name, &gpio_fops); + if (res < 0) { + printk(KERN_ERR "gpio: couldn't get a major number.\n"); + return res; + } + + /* Clear all leds */ + CRIS_LED_NETWORK_GRP0_SET(0); + CRIS_LED_NETWORK_GRP1_SET(0); + CRIS_LED_ACTIVE_SET(0); + CRIS_LED_DISK_READ(0); + CRIS_LED_DISK_WRITE(0); + + int res2 = request_irq(GIO_INTR_VECT, gpio_interrupt, + IRQF_SHARED | IRQF_DISABLED, "gpio", &alarmlist); + if (res2) { + printk(KERN_ERR "err: irq for gpio\n"); + return res2; + } + + /* No IRQs by default. */ + REG_WR_INT(gio, regi_gio, rw_intr_pins, 0); + +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO + virtual_gpio_init(); +#endif + + return res; +} + +/* this makes sure that gpio_init is called during kernel boot */ + +module_init(gpio_init); diff --git a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c new file mode 100644 index 000000000000..01ed0be2d0d1 --- /dev/null +++ b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c @@ -0,0 +1,180 @@ +/* + * arch/cris/arch-v32/drivers/nandflash.c + * + * Copyright (c) 2007 + * + * Derived from drivers/mtd/nand/spia.c + * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> +#include <asm/arch/memmap.h> +#include <hwregs/reg_map.h> +#include <hwregs/reg_rdwr.h> +#include <hwregs/pio_defs.h> +#include <pinmux.h> +#include <asm/io.h> + +#define MANUAL_ALE_CLE_CONTROL 1 + +#define regf_ALE a0 +#define regf_CLE a1 +#define regf_NCE ce0_n + +#define CLE_BIT 10 +#define ALE_BIT 11 +#define CE_BIT 12 + +struct mtd_info_wrapper { + struct mtd_info info; + struct nand_chip chip; +}; + +/* Bitmask for control pins */ +#define PIN_BITMASK ((1 << CE_BIT) | (1 << CLE_BIT) | (1 << ALE_BIT)) + +static struct mtd_info *crisv32_mtd; +/* + * hardware specific access to control-lines + */ +static void crisv32_hwcontrol(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + unsigned long flags; + reg_pio_rw_dout dout; + struct nand_chip *this = mtd->priv; + + local_irq_save(flags); + + /* control bits change */ + if (ctrl & NAND_CTRL_CHANGE) { + dout = REG_RD(pio, regi_pio, rw_dout); + dout.regf_NCE = (ctrl & NAND_NCE) ? 0 : 1; + +#if !MANUAL_ALE_CLE_CONTROL + if (ctrl & NAND_ALE) { + /* A0 = ALE high */ + this->IO_ADDR_W = (void __iomem *)REG_ADDR(pio, + regi_pio, rw_io_access1); + } else if (ctrl & NAND_CLE) { + /* A1 = CLE high */ + this->IO_ADDR_W = (void __iomem *)REG_ADDR(pio, + regi_pio, rw_io_access2); + } else { + /* A1 = CLE and A0 = ALE low */ + this->IO_ADDR_W = (void __iomem *)REG_ADDR(pio, + regi_pio, rw_io_access0); + } +#else + + dout.regf_CLE = (ctrl & NAND_CLE) ? 1 : 0; + dout.regf_ALE = (ctrl & NAND_ALE) ? 1 : 0; +#endif + REG_WR(pio, regi_pio, rw_dout, dout); + } + + /* command to chip */ + if (cmd != NAND_CMD_NONE) + writeb(cmd, this->IO_ADDR_W); + + local_irq_restore(flags); +} + +/* +* read device ready pin +*/ +static int crisv32_device_ready(struct mtd_info *mtd) +{ + reg_pio_r_din din = REG_RD(pio, regi_pio, r_din); + return din.rdy; +} + +/* + * Main initialization routine + */ +struct mtd_info *__init crisv32_nand_flash_probe(void) +{ + void __iomem *read_cs; + void __iomem *write_cs; + + struct mtd_info_wrapper *wrapper; + struct nand_chip *this; + int err = 0; + + reg_pio_rw_man_ctrl man_ctrl = { + .regf_NCE = regk_pio_yes, +#if MANUAL_ALE_CLE_CONTROL + .regf_ALE = regk_pio_yes, + .regf_CLE = regk_pio_yes +#endif + }; + reg_pio_rw_oe oe = { + .regf_NCE = regk_pio_yes, +#if MANUAL_ALE_CLE_CONTROL + .regf_ALE = regk_pio_yes, + .regf_CLE = regk_pio_yes +#endif + }; + reg_pio_rw_dout dout = { .regf_NCE = 1 }; + + /* Allocate pio pins to pio */ + crisv32_pinmux_alloc_fixed(pinmux_pio); + /* Set up CE, ALE, CLE (ce0_n, a0, a1) for manual control and output */ + REG_WR(pio, regi_pio, rw_man_ctrl, man_ctrl); + REG_WR(pio, regi_pio, rw_dout, dout); + REG_WR(pio, regi_pio, rw_oe, oe); + + /* Allocate memory for MTD device structure and private data */ + wrapper = kzalloc(sizeof(struct mtd_info_wrapper), GFP_KERNEL); + if (!wrapper) { + printk(KERN_ERR "Unable to allocate CRISv32 NAND MTD " + "device structure.\n"); + err = -ENOMEM; + return NULL; + } + + read_cs = write_cs = (void __iomem *)REG_ADDR(pio, regi_pio, + rw_io_access0); + + /* Get pointer to private data */ + this = &wrapper->chip; + crisv32_mtd = &wrapper->info; + + /* Link the private data with the MTD structure */ + crisv32_mtd->priv = this; + + /* Set address of NAND IO lines */ + this->IO_ADDR_R = read_cs; + this->IO_ADDR_W = write_cs; + this->cmd_ctrl = crisv32_hwcontrol; + this->dev_ready = crisv32_device_ready; + /* 20 us command delay time */ + this->chip_delay = 20; + this->ecc.mode = NAND_ECC_SOFT; + + /* Enable the following for a flash based bad block table */ + /* this->options = NAND_USE_FLASH_BBT; */ + + /* Scan to find existance of the device */ + if (nand_scan(crisv32_mtd, 1)) { + err = -ENXIO; + goto out_mtd; + } + + return crisv32_mtd; + +out_mtd: + kfree(wrapper); + return NULL; +} + diff --git a/arch/cris/arch-v32/drivers/mach-fs/Makefile b/arch/cris/arch-v32/drivers/mach-fs/Makefile new file mode 100644 index 000000000000..5c6d2a2a080e --- /dev/null +++ b/arch/cris/arch-v32/drivers/mach-fs/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for Etrax-specific drivers +# + +obj-$(CONFIG_ETRAX_NANDFLASH) += nandflash.o +obj-$(CONFIG_ETRAX_GPIO) += gpio.o diff --git a/arch/cris/arch-v32/drivers/gpio.c b/arch/cris/arch-v32/drivers/mach-fs/gpio.c index d82c5c561135..7863fd4efc2b 100644 --- a/arch/cris/arch-v32/drivers/gpio.c +++ b/arch/cris/arch-v32/drivers/mach-fs/gpio.c @@ -1,68 +1,15 @@ -/* $Id: gpio.c,v 1.16 2005/06/19 17:06:49 starvik Exp $ - * +/* * ETRAX CRISv32 general port I/O device * - * Copyright (c) 1999, 2000, 2001, 2002, 2003 Axis Communications AB + * Copyright (c) 1999-2006 Axis Communications AB * * Authors: Bjorn Wesen (initial version) * Ola Knutsson (LED handling) * Johan Adolfsson (read/set directions, write, port G, * port to ETRAX FS. * - * $Log: gpio.c,v $ - * Revision 1.16 2005/06/19 17:06:49 starvik - * Merge of Linux 2.6.12. - * - * Revision 1.15 2005/05/25 08:22:20 starvik - * Changed GPIO port order to fit packages/devices/axis-2.4. - * - * Revision 1.14 2005/04/24 18:35:08 starvik - * Updated with final register headers. - * - * Revision 1.13 2005/03/15 15:43:00 starvik - * dev_id needs to be supplied for shared IRQs. - * - * Revision 1.12 2005/03/10 17:12:00 starvik - * Protect alarm list with spinlock. - * - * Revision 1.11 2005/01/05 06:08:59 starvik - * No need to do local_irq_disable after local_irq_save. - * - * Revision 1.10 2004/11/19 08:38:31 starvik - * Removed old crap. - * - * Revision 1.9 2004/05/14 07:58:02 starvik - * Merge of changes from 2.4 - * - * Revision 1.8 2003/09/11 07:29:50 starvik - * Merge of Linux 2.6.0-test5 - * - * Revision 1.7 2003/07/10 13:25:46 starvik - * Compiles for 2.5.74 - * Lindented ethernet.c - * - * Revision 1.6 2003/07/04 08:27:46 starvik - * Merge of Linux 2.5.74 - * - * Revision 1.5 2003/06/10 08:26:37 johana - * Etrax -> ETRAX CRISv32 - * - * Revision 1.4 2003/06/05 14:22:48 johana - * Initialise some_alarms. - * - * Revision 1.3 2003/06/05 10:15:46 johana - * New INTR_VECT macros. - * Enable interrupts in global config. - * - * Revision 1.2 2003/06/03 15:52:50 johana - * Initial CRIS v32 version. - * - * Revision 1.1 2003/06/03 08:53:15 johana - * Copy of os/lx25/arch/cris/arch-v10/drivers/gpio.c version 1.7. - * */ - #include <linux/module.h> #include <linux/sched.h> #include <linux/slab.h> @@ -77,14 +24,20 @@ #include <linux/spinlock.h> #include <asm/etraxgpio.h> -#include <asm/arch/hwregs/reg_map.h> -#include <asm/arch/hwregs/reg_rdwr.h> -#include <asm/arch/hwregs/gio_defs.h> -#include <asm/arch/hwregs/intr_vect_defs.h> +#include <hwregs/reg_map.h> +#include <hwregs/reg_rdwr.h> +#include <hwregs/gio_defs.h> +#include <hwregs/intr_vect_defs.h> #include <asm/io.h> #include <asm/system.h> #include <asm/irq.h> +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO +#include "../i2c.h" + +#define VIRT_I2C_ADDR 0x40 +#endif + /* The following gio ports on ETRAX FS is available: * pa 8 bits, supports interrupts off, hi, low, set, posedge, negedge anyedge * pb 18 bits @@ -100,7 +53,12 @@ #if 0 static int dp_cnt; -#define DP(x) do { dp_cnt++; if (dp_cnt % 1000 == 0) x; }while(0) +#define DP(x) \ + do { \ + dp_cnt++; \ + if (dp_cnt % 1000 == 0) \ + x; \ + } while (0) #else #define DP(x) #endif @@ -111,13 +69,18 @@ static char gpio_name[] = "etrax gpio"; static wait_queue_head_t *gpio_wq; #endif +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO +static int virtual_gpio_ioctl(struct file *file, unsigned int cmd, + unsigned long arg); +#endif static int gpio_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg); -static ssize_t gpio_write(struct file * file, const char * buf, size_t count, - loff_t *off); + unsigned int cmd, unsigned long arg); +static ssize_t gpio_write(struct file *file, const char *buf, size_t count, + loff_t *off); static int gpio_open(struct inode *inode, struct file *filp); static int gpio_release(struct inode *inode, struct file *filp); -static unsigned int gpio_poll(struct file *filp, struct poll_table_struct *wait); +static unsigned int gpio_poll(struct file *filp, + struct poll_table_struct *wait); /* private data per open() of this driver */ @@ -136,18 +99,25 @@ struct gpio_private { /* linked list of alarms to check for */ -static struct gpio_private *alarmlist = 0; +static struct gpio_private *alarmlist; -static int gpio_some_alarms = 0; /* Set if someone uses alarm */ -static unsigned long gpio_pa_high_alarms = 0; -static unsigned long gpio_pa_low_alarms = 0; +static int gpio_some_alarms; /* Set if someone uses alarm */ +static unsigned long gpio_pa_high_alarms; +static unsigned long gpio_pa_low_alarms; static DEFINE_SPINLOCK(alarm_lock); #define NUM_PORTS (GPIO_MINOR_LAST+1) -#define GIO_REG_RD_ADDR(reg) (volatile unsigned long*) (regi_gio + REG_RD_ADDR_gio_##reg ) -#define GIO_REG_WR_ADDR(reg) (volatile unsigned long*) (regi_gio + REG_RD_ADDR_gio_##reg ) +#define GIO_REG_RD_ADDR(reg) \ + (volatile unsigned long *)(regi_gio + REG_RD_ADDR_gio_##reg) +#define GIO_REG_WR_ADDR(reg) \ + (volatile unsigned long *)(regi_gio + REG_RD_ADDR_gio_##reg) unsigned long led_dummy; +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO +static unsigned long virtual_dummy; +static unsigned long virtual_rw_pv_oe = CONFIG_ETRAX_DEF_GIO_PV_OE; +static unsigned short cached_virtual_gpio_read; +#endif static volatile unsigned long *data_out[NUM_PORTS] = { GIO_REG_WR_ADDR(rw_pa_dout), @@ -156,6 +126,9 @@ static volatile unsigned long *data_out[NUM_PORTS] = { GIO_REG_WR_ADDR(rw_pc_dout), GIO_REG_WR_ADDR(rw_pd_dout), GIO_REG_WR_ADDR(rw_pe_dout), +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO + &virtual_dummy, +#endif }; static volatile unsigned long *data_in[NUM_PORTS] = { @@ -165,6 +138,9 @@ static volatile unsigned long *data_in[NUM_PORTS] = { GIO_REG_RD_ADDR(r_pc_din), GIO_REG_RD_ADDR(r_pd_din), GIO_REG_RD_ADDR(r_pe_din), +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO + &virtual_dummy, +#endif }; static unsigned long changeable_dir[NUM_PORTS] = { @@ -174,6 +150,9 @@ static unsigned long changeable_dir[NUM_PORTS] = { CONFIG_ETRAX_PC_CHANGEABLE_DIR, CONFIG_ETRAX_PD_CHANGEABLE_DIR, CONFIG_ETRAX_PE_CHANGEABLE_DIR, +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO + CONFIG_ETRAX_PV_CHANGEABLE_DIR, +#endif }; static unsigned long changeable_bits[NUM_PORTS] = { @@ -183,6 +162,9 @@ static unsigned long changeable_bits[NUM_PORTS] = { CONFIG_ETRAX_PC_CHANGEABLE_BITS, CONFIG_ETRAX_PD_CHANGEABLE_BITS, CONFIG_ETRAX_PE_CHANGEABLE_BITS, +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO + CONFIG_ETRAX_PV_CHANGEABLE_BITS, +#endif }; static volatile unsigned long *dir_oe[NUM_PORTS] = { @@ -192,13 +174,14 @@ static volatile unsigned long *dir_oe[NUM_PORTS] = { GIO_REG_WR_ADDR(rw_pc_oe), GIO_REG_WR_ADDR(rw_pd_oe), GIO_REG_WR_ADDR(rw_pe_oe), +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO + &virtual_rw_pv_oe, +#endif }; -static unsigned int -gpio_poll(struct file *file, - poll_table *wait) +static unsigned int gpio_poll(struct file *file, struct poll_table_struct *wait) { unsigned int mask = 0; struct gpio_private *priv = (struct gpio_private *)file->private_data; @@ -210,65 +193,50 @@ gpio_poll(struct file *file, unsigned long flags; local_irq_save(flags); - data = REG_TYPE_CONV(unsigned long, reg_gio_r_pa_din, REG_RD(gio, regi_gio, r_pa_din)); + data = REG_TYPE_CONV(unsigned long, reg_gio_r_pa_din, + REG_RD(gio, regi_gio, r_pa_din)); /* PA has support for interrupt * lets activate high for those low and with highalarm set */ intr_cfg = REG_RD(gio, regi_gio, rw_intr_cfg); tmp = ~data & priv->highalarm & 0xFF; - if (tmp & (1 << 0)) { + if (tmp & (1 << 0)) intr_cfg.pa0 = regk_gio_hi; - } - if (tmp & (1 << 1)) { + if (tmp & (1 << 1)) intr_cfg.pa1 = regk_gio_hi; - } - if (tmp & (1 << 2)) { + if (tmp & (1 << 2)) intr_cfg.pa2 = regk_gio_hi; - } - if (tmp & (1 << 3)) { + if (tmp & (1 << 3)) intr_cfg.pa3 = regk_gio_hi; - } - if (tmp & (1 << 4)) { + if (tmp & (1 << 4)) intr_cfg.pa4 = regk_gio_hi; - } - if (tmp & (1 << 5)) { + if (tmp & (1 << 5)) intr_cfg.pa5 = regk_gio_hi; - } - if (tmp & (1 << 6)) { + if (tmp & (1 << 6)) intr_cfg.pa6 = regk_gio_hi; - } - if (tmp & (1 << 7)) { + if (tmp & (1 << 7)) intr_cfg.pa7 = regk_gio_hi; - } /* * lets activate low for those high and with lowalarm set */ tmp = data & priv->lowalarm & 0xFF; - if (tmp & (1 << 0)) { + if (tmp & (1 << 0)) intr_cfg.pa0 = regk_gio_lo; - } - if (tmp & (1 << 1)) { + if (tmp & (1 << 1)) intr_cfg.pa1 = regk_gio_lo; - } - if (tmp & (1 << 2)) { + if (tmp & (1 << 2)) intr_cfg.pa2 = regk_gio_lo; - } - if (tmp & (1 << 3)) { + if (tmp & (1 << 3)) intr_cfg.pa3 = regk_gio_lo; - } - if (tmp & (1 << 4)) { + if (tmp & (1 << 4)) intr_cfg.pa4 = regk_gio_lo; - } - if (tmp & (1 << 5)) { + if (tmp & (1 << 5)) intr_cfg.pa5 = regk_gio_lo; - } - if (tmp & (1 << 6)) { + if (tmp & (1 << 6)) intr_cfg.pa6 = regk_gio_lo; - } - if (tmp & (1 << 7)) { + if (tmp & (1 << 7)) intr_cfg.pa7 = regk_gio_lo; - } REG_WR(gio, regi_gio, rw_intr_cfg, intr_cfg); local_irq_restore(flags); @@ -277,50 +245,65 @@ gpio_poll(struct file *file, else return 0; - if ((data & priv->highalarm) || - (~data & priv->lowalarm)) { + if ((data & priv->highalarm) || (~data & priv->lowalarm)) mask = POLLIN|POLLRDNORM; - } - DP(printk("gpio_poll ready: mask 0x%08X\n", mask)); + DP(printk(KERN_DEBUG "gpio_poll ready: mask 0x%08X\n", mask)); return mask; } int etrax_gpio_wake_up_check(void) { - struct gpio_private *priv = alarmlist; + struct gpio_private *priv; unsigned long data = 0; - int ret = 0; + unsigned long flags; + int ret = 0; + spin_lock_irqsave(&alarm_lock, flags); + priv = alarmlist; while (priv) { +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO + if (priv->minor == GPIO_MINOR_V) + data = (unsigned long)cached_virtual_gpio_read; + else { + data = *data_in[priv->minor]; + if (priv->minor == GPIO_MINOR_A) + priv->lowalarm |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); + } +#else data = *data_in[priv->minor]; +#endif if ((data & priv->highalarm) || (~data & priv->lowalarm)) { - DP(printk("etrax_gpio_wake_up_check %i\n",priv->minor)); + DP(printk(KERN_DEBUG + "etrax_gpio_wake_up_check %i\n", priv->minor)); wake_up_interruptible(&priv->alarm_wq); - ret = 1; + ret = 1; } priv = priv->next; } - return ret; + spin_unlock_irqrestore(&alarm_lock, flags); + return ret; } static irqreturn_t -gpio_poll_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +gpio_poll_timer_interrupt(int irq, void *dev_id) { - if (gpio_some_alarms) { + if (gpio_some_alarms) return IRQ_RETVAL(etrax_gpio_wake_up_check()); - } - return IRQ_NONE; + return IRQ_NONE; } static irqreturn_t -gpio_pa_interrupt(int irq, void *dev_id, struct pt_regs *regs) +gpio_pa_interrupt(int irq, void *dev_id) { reg_gio_rw_intr_mask intr_mask; reg_gio_r_masked_intr masked_intr; reg_gio_rw_ack_intr ack_intr; unsigned long tmp; unsigned long tmp2; +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO + unsigned char enable_gpiov_ack = 0; +#endif /* Find what PA interrupts are active */ masked_intr = REG_RD(gio, regi_gio, r_masked_intr); @@ -331,6 +314,17 @@ gpio_pa_interrupt(int irq, void *dev_id, struct pt_regs *regs) tmp &= (gpio_pa_high_alarms | gpio_pa_low_alarms); spin_unlock(&alarm_lock); +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO + /* Something changed on virtual GPIO. Interrupt is acked by + * reading the device. + */ + if (tmp & (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN)) { + i2c_read(VIRT_I2C_ADDR, (void *)&cached_virtual_gpio_read, + sizeof(cached_virtual_gpio_read)); + enable_gpiov_ack = 1; + } +#endif + /* Ack them */ ack_intr = REG_TYPE_CONV(reg_gio_rw_ack_intr, unsigned long, tmp); REG_WR(gio, regi_gio, rw_ack_intr, ack_intr); @@ -339,18 +333,24 @@ gpio_pa_interrupt(int irq, void *dev_id, struct pt_regs *regs) intr_mask = REG_RD(gio, regi_gio, rw_intr_mask); tmp2 = REG_TYPE_CONV(unsigned long, reg_gio_rw_intr_mask, intr_mask); tmp2 &= ~tmp; +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO + /* Do not disable interrupt on virtual GPIO. Changes on virtual + * pins are only noticed by an interrupt. + */ + if (enable_gpiov_ack) + tmp2 |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); +#endif intr_mask = REG_TYPE_CONV(reg_gio_rw_intr_mask, unsigned long, tmp2); REG_WR(gio, regi_gio, rw_intr_mask, intr_mask); - if (gpio_some_alarms) { + if (gpio_some_alarms) return IRQ_RETVAL(etrax_gpio_wake_up_check()); - } - return IRQ_NONE; + return IRQ_NONE; } -static ssize_t gpio_write(struct file * file, const char * buf, size_t count, - loff_t *off) +static ssize_t gpio_write(struct file *file, const char *buf, size_t count, + loff_t *off) { struct gpio_private *priv = (struct gpio_private *)file->private_data; unsigned char data, clk_mask, data_mask, write_msb; @@ -360,29 +360,31 @@ static ssize_t gpio_write(struct file * file, const char * buf, size_t count, ssize_t retval = count; /* Only bits 0-7 may be used for write operations but allow all devices except leds... */ - if (priv->minor == GPIO_MINOR_LEDS) { +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO + if (priv->minor == GPIO_MINOR_V) + return -EFAULT; +#endif + if (priv->minor == GPIO_MINOR_LEDS) return -EFAULT; - } - if (!access_ok(VERIFY_READ, buf, count)) { + if (!access_ok(VERIFY_READ, buf, count)) return -EFAULT; - } clk_mask = priv->clk_mask; data_mask = priv->data_mask; /* It must have been configured using the IO_CFG_WRITE_MODE */ /* Perhaps a better error code? */ - if (clk_mask == 0 || data_mask == 0) { + if (clk_mask == 0 || data_mask == 0) return -EPERM; - } write_msb = priv->write_msb; - D(printk("gpio_write: %lu to data 0x%02X clk 0x%02X msb: %i\n",count, data_mask, clk_mask, write_msb)); + D(printk(KERN_DEBUG "gpio_write: %lu to data 0x%02X clk 0x%02X " + "msb: %i\n", count, data_mask, clk_mask, write_msb)); port = data_out[priv->minor]; while (count--) { int i; data = *buf++; if (priv->write_msb) { - for (i = 7; i >= 0;i--) { + for (i = 7; i >= 0; i--) { local_irq_save(flags); shadow = *port; *port = shadow &= ~clk_mask; @@ -395,7 +397,7 @@ static ssize_t gpio_write(struct file * file, const char * buf, size_t count, local_irq_restore(flags); } } else { - for (i = 0; i <= 7;i++) { + for (i = 0; i <= 7; i++) { local_irq_save(flags); shadow = *port; *port = shadow &= ~clk_mask; @@ -423,18 +425,16 @@ gpio_open(struct inode *inode, struct file *filp) if (p > GPIO_MINOR_LAST) return -EINVAL; - priv = kmalloc(sizeof(struct gpio_private), - GFP_KERNEL); + priv = kmalloc(sizeof(struct gpio_private), GFP_KERNEL); if (!priv) return -ENOMEM; + memset(priv, 0, sizeof(*priv)); priv->minor = p; - /* initialize the io/alarm struct and link it into our alarmlist */ + /* initialize the io/alarm struct */ - priv->next = alarmlist; - alarmlist = priv; priv->clk_mask = 0; priv->data_mask = 0; priv->highalarm = 0; @@ -443,20 +443,30 @@ gpio_open(struct inode *inode, struct file *filp) filp->private_data = (void *)priv; + /* link it into our alarmlist */ + spin_lock_irq(&alarm_lock); + priv->next = alarmlist; + alarmlist = priv; + spin_unlock_irq(&alarm_lock); + return 0; } static int gpio_release(struct inode *inode, struct file *filp) { - struct gpio_private *p = alarmlist; - struct gpio_private *todel = (struct gpio_private *)filp->private_data; + struct gpio_private *p; + struct gpio_private *todel; /* local copies while updating them: */ unsigned long a_high, a_low; unsigned long some_alarms; /* unlink from alarmlist and free the private structure */ + spin_lock_irq(&alarm_lock); + p = alarmlist; + todel = (struct gpio_private *)filp->private_data; + if (p == todel) { alarmlist = todel->next; } else { @@ -468,26 +478,35 @@ gpio_release(struct inode *inode, struct file *filp) kfree(todel); /* Check if there are still any alarms set */ p = alarmlist; - some_alarms = 0; + some_alarms = 0; a_high = 0; a_low = 0; while (p) { if (p->minor == GPIO_MINOR_A) { +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO + p->lowalarm |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); +#endif a_high |= p->highalarm; a_low |= p->lowalarm; } - if (p->highalarm | p->lowalarm) { + if (p->highalarm | p->lowalarm) some_alarms = 1; - } p = p->next; } - spin_lock(&alarm_lock); +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO + /* Variables 'some_alarms' and 'a_low' needs to be set here again + * to ensure that interrupt for virtual GPIO is handled. + */ + some_alarms = 1; + a_low |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); +#endif + gpio_some_alarms = some_alarms; gpio_pa_high_alarms = a_high; gpio_pa_low_alarms = a_low; - spin_unlock(&alarm_lock); + spin_unlock_irq(&alarm_lock); return 0; } @@ -496,7 +515,7 @@ gpio_release(struct inode *inode, struct file *filp) * set alarms to wait for using a subsequent select(). */ -unsigned long inline setget_input(struct gpio_private *priv, unsigned long arg) +inline unsigned long setget_input(struct gpio_private *priv, unsigned long arg) { /* Set direction 0=unchanged 1=input, * return mask with 1=input @@ -512,13 +531,17 @@ unsigned long inline setget_input(struct gpio_private *priv, unsigned long arg) if (priv->minor == GPIO_MINOR_A) dir_shadow ^= 0xFF; /* Only 8 bits */ +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO + else if (priv->minor == GPIO_MINOR_V) + dir_shadow ^= 0xFFFF; /* Only 16 bits */ +#endif else dir_shadow ^= 0x3FFFF; /* Only 18 bits */ return dir_shadow; } /* setget_input */ -unsigned long inline setget_output(struct gpio_private *priv, unsigned long arg) +inline unsigned long setget_output(struct gpio_private *priv, unsigned long arg) { unsigned long flags; unsigned long dir_shadow; @@ -542,20 +565,22 @@ gpio_ioctl(struct inode *inode, struct file *file, unsigned long val; unsigned long shadow; struct gpio_private *priv = (struct gpio_private *)file->private_data; - if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE) { + if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE) return -EINVAL; - } + +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO + if (priv->minor == GPIO_MINOR_V) + return virtual_gpio_ioctl(file, cmd, arg); +#endif switch (_IOC_NR(cmd)) { case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */ - // read the port + /* Read the port. */ return *data_in[priv->minor]; break; case IO_SETBITS: local_irq_save(flags); - if (arg & 0x04) - printk("GPIO SET 2\n"); - // set changeable bits with a 1 in arg + /* Set changeable bits with a 1 in arg. */ shadow = *data_out[priv->minor]; shadow |= (arg & changeable_bits[priv->minor]); *data_out[priv->minor] = shadow; @@ -563,46 +588,42 @@ gpio_ioctl(struct inode *inode, struct file *file, break; case IO_CLRBITS: local_irq_save(flags); - if (arg & 0x04) - printk("GPIO CLR 2\n"); - // clear changeable bits with a 1 in arg + /* Clear changeable bits with a 1 in arg. */ shadow = *data_out[priv->minor]; shadow &= ~(arg & changeable_bits[priv->minor]); *data_out[priv->minor] = shadow; local_irq_restore(flags); break; case IO_HIGHALARM: - // set alarm when bits with 1 in arg go high + /* Set alarm when bits with 1 in arg go high. */ priv->highalarm |= arg; - spin_lock(&alarm_lock); + spin_lock_irqsave(&alarm_lock, flags); gpio_some_alarms = 1; - if (priv->minor == GPIO_MINOR_A) { + if (priv->minor == GPIO_MINOR_A) gpio_pa_high_alarms |= arg; - } - spin_unlock(&alarm_lock); + spin_unlock_irqrestore(&alarm_lock, flags); break; case IO_LOWALARM: - // set alarm when bits with 1 in arg go low + /* Set alarm when bits with 1 in arg go low. */ priv->lowalarm |= arg; - spin_lock(&alarm_lock); + spin_lock_irqsave(&alarm_lock, flags); gpio_some_alarms = 1; - if (priv->minor == GPIO_MINOR_A) { + if (priv->minor == GPIO_MINOR_A) gpio_pa_low_alarms |= arg; - } - spin_unlock(&alarm_lock); + spin_unlock_irqrestore(&alarm_lock, flags); break; case IO_CLRALARM: - // clear alarm for bits with 1 in arg + /* Clear alarm for bits with 1 in arg. */ priv->highalarm &= ~arg; priv->lowalarm &= ~arg; - spin_lock(&alarm_lock); + spin_lock_irqsave(&alarm_lock, flags); if (priv->minor == GPIO_MINOR_A) { if (gpio_pa_high_alarms & arg || - gpio_pa_low_alarms & arg) { + gpio_pa_low_alarms & arg) /* Must update the gpio_pa_*alarms masks */ - } + ; } - spin_unlock(&alarm_lock); + spin_unlock_irqrestore(&alarm_lock, flags); break; case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */ /* Read direction 0=input 1=output */ @@ -633,8 +654,7 @@ gpio_ioctl(struct inode *inode, struct file *file, if (!((priv->clk_mask & changeable_bits[priv->minor]) && (priv->data_mask & changeable_bits[priv->minor]) && (priv->clk_mask & dir_shadow) && - (priv->data_mask & dir_shadow))) - { + (priv->data_mask & dir_shadow))) { priv->clk_mask = 0; priv->data_mask = 0; return -EPERM; @@ -644,34 +664,34 @@ gpio_ioctl(struct inode *inode, struct file *file, case IO_READ_INBITS: /* *arg is result of reading the input pins */ val = *data_in[priv->minor]; - if (copy_to_user((unsigned long*)arg, &val, sizeof(val))) + if (copy_to_user((unsigned long *)arg, &val, sizeof(val))) return -EFAULT; return 0; break; case IO_READ_OUTBITS: /* *arg is result of reading the output shadow */ val = *data_out[priv->minor]; - if (copy_to_user((unsigned long*)arg, &val, sizeof(val))) + if (copy_to_user((unsigned long *)arg, &val, sizeof(val))) return -EFAULT; break; case IO_SETGET_INPUT: /* bits set in *arg is set to input, * *arg updated with current input pins. */ - if (copy_from_user(&val, (unsigned long*)arg, sizeof(val))) + if (copy_from_user(&val, (unsigned long *)arg, sizeof(val))) return -EFAULT; val = setget_input(priv, val); - if (copy_to_user((unsigned long*)arg, &val, sizeof(val))) + if (copy_to_user((unsigned long *)arg, &val, sizeof(val))) return -EFAULT; break; case IO_SETGET_OUTPUT: /* bits set in *arg is set to output, * *arg updated with current output pins. */ - if (copy_from_user(&val, (unsigned long*)arg, sizeof(val))) + if (copy_from_user(&val, (unsigned long *)arg, sizeof(val))) return -EFAULT; val = setget_output(priv, val); - if (copy_to_user((unsigned long*)arg, &val, sizeof(val))) + if (copy_to_user((unsigned long *)arg, &val, sizeof(val))) return -EFAULT; break; default: @@ -684,6 +704,133 @@ gpio_ioctl(struct inode *inode, struct file *file, return 0; } +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO +static int +virtual_gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + unsigned long flags; + unsigned short val; + unsigned short shadow; + struct gpio_private *priv = (struct gpio_private *)file->private_data; + + switch (_IOC_NR(cmd)) { + case IO_SETBITS: + local_irq_save(flags); + /* Set changeable bits with a 1 in arg. */ + i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); + shadow |= ~*dir_oe[priv->minor]; + shadow |= (arg & changeable_bits[priv->minor]); + i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); + local_irq_restore(flags); + break; + case IO_CLRBITS: + local_irq_save(flags); + /* Clear changeable bits with a 1 in arg. */ + i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); + shadow |= ~*dir_oe[priv->minor]; + shadow &= ~(arg & changeable_bits[priv->minor]); + i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); + local_irq_restore(flags); + break; + case IO_HIGHALARM: + /* Set alarm when bits with 1 in arg go high. */ + priv->highalarm |= arg; + spin_lock(&alarm_lock); + gpio_some_alarms = 1; + spin_unlock(&alarm_lock); + break; + case IO_LOWALARM: + /* Set alarm when bits with 1 in arg go low. */ + priv->lowalarm |= arg; + spin_lock(&alarm_lock); + gpio_some_alarms = 1; + spin_unlock(&alarm_lock); + break; + case IO_CLRALARM: + /* Clear alarm for bits with 1 in arg. */ + priv->highalarm &= ~arg; + priv->lowalarm &= ~arg; + spin_lock(&alarm_lock); + spin_unlock(&alarm_lock); + break; + case IO_CFG_WRITE_MODE: + { + unsigned long dir_shadow; + dir_shadow = *dir_oe[priv->minor]; + + priv->clk_mask = arg & 0xFF; + priv->data_mask = (arg >> 8) & 0xFF; + priv->write_msb = (arg >> 16) & 0x01; + /* Check if we're allowed to change the bits and + * the direction is correct + */ + if (!((priv->clk_mask & changeable_bits[priv->minor]) && + (priv->data_mask & changeable_bits[priv->minor]) && + (priv->clk_mask & dir_shadow) && + (priv->data_mask & dir_shadow))) { + priv->clk_mask = 0; + priv->data_mask = 0; + return -EPERM; + } + break; + } + case IO_READ_INBITS: + /* *arg is result of reading the input pins */ + val = cached_virtual_gpio_read; + val &= ~*dir_oe[priv->minor]; + if (copy_to_user((unsigned long *)arg, &val, sizeof(val))) + return -EFAULT; + return 0; + break; + case IO_READ_OUTBITS: + /* *arg is result of reading the output shadow */ + i2c_read(VIRT_I2C_ADDR, (void *)&val, sizeof(val)); + val &= *dir_oe[priv->minor]; + if (copy_to_user((unsigned long *)arg, &val, sizeof(val))) + return -EFAULT; + break; + case IO_SETGET_INPUT: + { + /* bits set in *arg is set to input, + * *arg updated with current input pins. + */ + unsigned short input_mask = ~*dir_oe[priv->minor]; + if (copy_from_user(&val, (unsigned long *)arg, sizeof(val))) + return -EFAULT; + val = setget_input(priv, val); + if (copy_to_user((unsigned long *)arg, &val, sizeof(val))) + return -EFAULT; + if ((input_mask & val) != input_mask) { + /* Input pins changed. All ports desired as input + * should be set to logic 1. + */ + unsigned short change = input_mask ^ val; + i2c_read(VIRT_I2C_ADDR, (void *)&shadow, + sizeof(shadow)); + shadow &= ~change; + shadow |= val; + i2c_write(VIRT_I2C_ADDR, (void *)&shadow, + sizeof(shadow)); + } + break; + } + case IO_SETGET_OUTPUT: + /* bits set in *arg is set to output, + * *arg updated with current output pins. + */ + if (copy_from_user(&val, (unsigned long *)arg, sizeof(val))) + return -EFAULT; + val = setget_output(priv, val); + if (copy_to_user((unsigned long *)arg, &val, sizeof(val))) + return -EFAULT; + break; + default: + return -EINVAL; + } /* switch */ + return 0; +} +#endif /* CONFIG_ETRAX_VIRTUAL_GPIO */ + static int gpio_leds_ioctl(unsigned int cmd, unsigned long arg) { @@ -694,8 +841,8 @@ gpio_leds_ioctl(unsigned int cmd, unsigned long arg) case IO_LEDACTIVE_SET: green = ((unsigned char) arg) & 1; red = (((unsigned char) arg) >> 1) & 1; - LED_ACTIVE_SET_G(green); - LED_ACTIVE_SET_R(red); + CRIS_LED_ACTIVE_SET_G(green); + CRIS_LED_ACTIVE_SET_R(red); break; default: @@ -705,7 +852,7 @@ gpio_leds_ioctl(unsigned int cmd, unsigned long arg) return 0; } -const struct file_operations gpio_fops = { +struct file_operations gpio_fops = { .owner = THIS_MODULE, .poll = gpio_poll, .ioctl = gpio_ioctl, @@ -714,6 +861,66 @@ const struct file_operations gpio_fops = { .release = gpio_release, }; +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO +static void +virtual_gpio_init(void) +{ + reg_gio_rw_intr_cfg intr_cfg; + reg_gio_rw_intr_mask intr_mask; + unsigned short shadow; + + shadow = ~virtual_rw_pv_oe; /* Input ports should be set to logic 1 */ + shadow |= CONFIG_ETRAX_DEF_GIO_PV_OUT; + i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); + + /* Set interrupt mask and on what state the interrupt shall trigger. + * For virtual gpio the interrupt shall trigger on logic '0'. + */ + intr_cfg = REG_RD(gio, regi_gio, rw_intr_cfg); + intr_mask = REG_RD(gio, regi_gio, rw_intr_mask); + + switch (CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN) { + case 0: + intr_cfg.pa0 = regk_gio_lo; + intr_mask.pa0 = regk_gio_yes; + break; + case 1: + intr_cfg.pa1 = regk_gio_lo; + intr_mask.pa1 = regk_gio_yes; + break; + case 2: + intr_cfg.pa2 = regk_gio_lo; + intr_mask.pa2 = regk_gio_yes; + break; + case 3: + intr_cfg.pa3 = regk_gio_lo; + intr_mask.pa3 = regk_gio_yes; + break; + case 4: + intr_cfg.pa4 = regk_gio_lo; + intr_mask.pa4 = regk_gio_yes; + break; + case 5: + intr_cfg.pa5 = regk_gio_lo; + intr_mask.pa5 = regk_gio_yes; + break; + case 6: + intr_cfg.pa6 = regk_gio_lo; + intr_mask.pa6 = regk_gio_yes; + break; + case 7: + intr_cfg.pa7 = regk_gio_lo; + intr_mask.pa7 = regk_gio_yes; + break; + } + + REG_WR(gio, regi_gio, rw_intr_cfg, intr_cfg); + REG_WR(gio, regi_gio, rw_intr_mask, intr_mask); + + gpio_pa_low_alarms |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); + gpio_some_alarms = 1; +} +#endif /* main driver initialization routine, called from mem.c */ @@ -721,7 +928,6 @@ static __init int gpio_init(void) { int res; - reg_intr_vect_rw_mask intr_mask; /* do the formalities */ @@ -732,30 +938,30 @@ gpio_init(void) } /* Clear all leds */ - LED_NETWORK_SET(0); - LED_ACTIVE_SET(0); - LED_DISK_READ(0); - LED_DISK_WRITE(0); - - printk("ETRAX FS GPIO driver v2.5, (c) 2003-2005 Axis Communications AB\n"); + CRIS_LED_NETWORK_GRP0_SET(0); + CRIS_LED_NETWORK_GRP1_SET(0); + CRIS_LED_ACTIVE_SET(0); + CRIS_LED_DISK_READ(0); + CRIS_LED_DISK_WRITE(0); + + printk(KERN_INFO "ETRAX FS GPIO driver v2.5, (c) 2003-2007 " + "Axis Communications AB\n"); /* We call etrax_gpio_wake_up_check() from timer interrupt and * from cpu_idle() in kernel/process.c * The check in cpu_idle() reduces latency from ~15 ms to ~6 ms * in some tests. */ - if (request_irq(TIMER_INTR_VECT, gpio_poll_timer_interrupt, - IRQF_SHARED | IRQF_DISABLED,"gpio poll", &alarmlist)) { - printk("err: timer0 irq for gpio\n"); - } - if (request_irq(GEN_IO_INTR_VECT, gpio_pa_interrupt, - IRQF_SHARED | IRQF_DISABLED,"gpio PA", &alarmlist)) { - printk("err: PA irq for gpio\n"); - } - /* enable the gio and timer irq in global config */ - intr_mask = REG_RD(intr_vect, regi_irq, rw_mask); - intr_mask.timer = 1; - intr_mask.gen_io = 1; - REG_WR(intr_vect, regi_irq, rw_mask, intr_mask); + if (request_irq(TIMER0_INTR_VECT, gpio_poll_timer_interrupt, + IRQF_SHARED | IRQF_DISABLED, "gpio poll", &alarmlist)) + printk(KERN_ERR "timer0 irq for gpio\n"); + + if (request_irq(GIO_INTR_VECT, gpio_pa_interrupt, + IRQF_SHARED | IRQF_DISABLED, "gpio PA", &alarmlist)) + printk(KERN_ERR "PA irq for gpio\n"); + +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO + virtual_gpio_init(); +#endif return res; } diff --git a/arch/cris/arch-v32/drivers/nandflash.c b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c index 5ce015c6bb0d..aa01b134458a 100644 --- a/arch/cris/arch-v32/drivers/nandflash.c +++ b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c @@ -4,9 +4,7 @@ * Copyright (c) 2004 * * Derived from drivers/mtd/nand/spia.c - * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) - * - * $Id: nandflash.c,v 1.3 2005/06/01 10:57:12 starvik Exp $ + * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -21,10 +19,10 @@ #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <asm/arch/memmap.h> -#include <asm/arch/hwregs/reg_map.h> -#include <asm/arch/hwregs/reg_rdwr.h> -#include <asm/arch/hwregs/gio_defs.h> -#include <asm/arch/hwregs/bif_core_defs.h> +#include <hwregs/reg_map.h> +#include <hwregs/reg_rdwr.h> +#include <hwregs/gio_defs.h> +#include <hwregs/bif_core_defs.h> #include <asm/io.h> #define CE_BIT 4 @@ -32,44 +30,65 @@ #define ALE_BIT 6 #define BY_BIT 7 -static struct mtd_info *crisv32_mtd = NULL; +struct mtd_info_wrapper { + struct mtd_info info; + struct nand_chip chip; +}; + +/* Bitmask for control pins */ +#define PIN_BITMASK ((1 << CE_BIT) | (1 << CLE_BIT) | (1 << ALE_BIT)) + +/* Bitmask for mtd nand control bits */ +#define CTRL_BITMASK (NAND_NCE | NAND_CLE | NAND_ALE) + + +static struct mtd_info *crisv32_mtd; /* * hardware specific access to control-lines -*/ -static void crisv32_hwcontrol(struct mtd_info *mtd, int cmd) + */ +static void crisv32_hwcontrol(struct mtd_info *mtd, int cmd, + unsigned int ctrl) { unsigned long flags; - reg_gio_rw_pa_dout dout = REG_RD(gio, regi_gio, rw_pa_dout); + reg_gio_rw_pa_dout dout; + struct nand_chip *this = mtd->priv; local_irq_save(flags); - switch(cmd){ - case NAND_CTL_SETCLE: - dout.data |= (1<<CLE_BIT); - break; - case NAND_CTL_CLRCLE: - dout.data &= ~(1<<CLE_BIT); - break; - case NAND_CTL_SETALE: - dout.data |= (1<<ALE_BIT); - break; - case NAND_CTL_CLRALE: - dout.data &= ~(1<<ALE_BIT); - break; - case NAND_CTL_SETNCE: - dout.data |= (1<<CE_BIT); - break; - case NAND_CTL_CLRNCE: - dout.data &= ~(1<<CE_BIT); - break; + + /* control bits change */ + if (ctrl & NAND_CTRL_CHANGE) { + dout = REG_RD(gio, regi_gio, rw_pa_dout); + dout.data &= ~PIN_BITMASK; + +#if (CE_BIT == 4 && NAND_NCE == 1 && \ + CLE_BIT == 5 && NAND_CLE == 2 && \ + ALE_BIT == 6 && NAND_ALE == 4) + /* Pins in same order as control bits, but shifted. + * Optimize for this case; works for 2.6.18 */ + dout.data |= ((ctrl & CTRL_BITMASK) ^ NAND_NCE) << CE_BIT; +#else + /* the slow way */ + if (!(ctrl & NAND_NCE)) + dout.data |= (1 << CE_BIT); + if (ctrl & NAND_CLE) + dout.data |= (1 << CLE_BIT); + if (ctrl & NAND_ALE) + dout.data |= (1 << ALE_BIT); +#endif + REG_WR(gio, regi_gio, rw_pa_dout, dout); } - REG_WR(gio, regi_gio, rw_pa_dout, dout); + + /* command to chip */ + if (cmd != NAND_CMD_NONE) + writeb(cmd, this->IO_ADDR_W); + local_irq_restore(flags); } /* * read device ready pin */ -int crisv32_device_ready(struct mtd_info *mtd) +static int crisv32_device_ready(struct mtd_info *mtd) { reg_gio_r_pa_din din = REG_RD(gio, regi_gio, r_pa_din); return ((din.data & (1 << BY_BIT)) >> BY_BIT); @@ -78,21 +97,23 @@ int crisv32_device_ready(struct mtd_info *mtd) /* * Main initialization routine */ -struct mtd_info* __init crisv32_nand_flash_probe (void) +struct mtd_info *__init crisv32_nand_flash_probe(void) { void __iomem *read_cs; void __iomem *write_cs; - reg_bif_core_rw_grp3_cfg bif_cfg = REG_RD(bif_core, regi_bif_core, rw_grp3_cfg); + reg_bif_core_rw_grp3_cfg bif_cfg = REG_RD(bif_core, regi_bif_core, + rw_grp3_cfg); reg_gio_rw_pa_oe pa_oe = REG_RD(gio, regi_gio, rw_pa_oe); + struct mtd_info_wrapper *wrapper; struct nand_chip *this; int err = 0; /* Allocate memory for MTD device structure and private data */ - crisv32_mtd = kmalloc (sizeof(struct mtd_info) + sizeof (struct nand_chip), - GFP_KERNEL); - if (!crisv32_mtd) { - printk ("Unable to allocate CRISv32 NAND MTD device structure.\n"); + wrapper = kzalloc(sizeof(struct mtd_info_wrapper), GFP_KERNEL); + if (!wrapper) { + printk(KERN_ERR "Unable to allocate CRISv32 NAND MTD " + "device structure.\n"); err = -ENOMEM; return NULL; } @@ -101,45 +122,42 @@ struct mtd_info* __init crisv32_nand_flash_probe (void) write_cs = ioremap(MEM_CSP1_START | MEM_NON_CACHEABLE, 8192); if (!read_cs || !write_cs) { - printk("CRISv32 NAND ioremap failed\n"); + printk(KERN_ERR "CRISv32 NAND ioremap failed\n"); err = -EIO; goto out_mtd; } /* Get pointer to private data */ - this = (struct nand_chip *) (&crisv32_mtd[1]); + this = &wrapper->chip; + crisv32_mtd = &wrapper->info; pa_oe.oe |= 1 << CE_BIT; pa_oe.oe |= 1 << ALE_BIT; pa_oe.oe |= 1 << CLE_BIT; - pa_oe.oe &= ~ (1 << BY_BIT); + pa_oe.oe &= ~(1 << BY_BIT); REG_WR(gio, regi_gio, rw_pa_oe, pa_oe); bif_cfg.gated_csp0 = regk_bif_core_rd; bif_cfg.gated_csp1 = regk_bif_core_wr; REG_WR(bif_core, regi_bif_core, rw_grp3_cfg, bif_cfg); - /* Initialize structures */ - memset((char *) crisv32_mtd, 0, sizeof(struct mtd_info)); - memset((char *) this, 0, sizeof(struct nand_chip)); - /* Link the private data with the MTD structure */ crisv32_mtd->priv = this; /* Set address of NAND IO lines */ this->IO_ADDR_R = read_cs; this->IO_ADDR_W = write_cs; - this->hwcontrol = crisv32_hwcontrol; + this->cmd_ctrl = crisv32_hwcontrol; this->dev_ready = crisv32_device_ready; /* 20 us command delay time */ this->chip_delay = 20; - this->eccmode = NAND_ECC_SOFT; + this->ecc.mode = NAND_ECC_SOFT; /* Enable the following for a flash based bad block table */ - this->options = NAND_USE_FLASH_BBT; + /* this->options = NAND_USE_FLASH_BBT; */ - /* Scan to find existence of the device */ - if (nand_scan (crisv32_mtd, 1)) { + /* Scan to find existance of the device */ + if (nand_scan(crisv32_mtd, 1)) { err = -ENXIO; goto out_ior; } @@ -150,7 +168,7 @@ out_ior: iounmap((void *)read_cs); iounmap((void *)write_cs); out_mtd: - kfree (crisv32_mtd); - return NULL; + kfree(wrapper); + return NULL; } diff --git a/arch/cris/arch-v32/drivers/pcf8563.c b/arch/cris/arch-v32/drivers/pcf8563.c index 6dbd700d3d66..53db3870ba04 100644 --- a/arch/cris/arch-v32/drivers/pcf8563.c +++ b/arch/cris/arch-v32/drivers/pcf8563.c @@ -10,7 +10,7 @@ * 400 kbits/s. The built-in word address register is incremented * automatically after each written or read byte. * - * Copyright (c) 2002-2003, Axis Communications AB + * Copyright (c) 2002-2007, Axis Communications AB * All rights reserved. * * Author: Tobias Anderberg <tobiasa@axis.com>. @@ -26,6 +26,7 @@ #include <linux/ioctl.h> #include <linux/delay.h> #include <linux/bcd.h> +#include <linux/mutex.h> #include <asm/uaccess.h> #include <asm/system.h> @@ -37,24 +38,27 @@ #define PCF8563_MAJOR 121 /* Local major number. */ #define DEVICE_NAME "rtc" /* Name which is registered in /proc/devices. */ #define PCF8563_NAME "PCF8563" -#define DRIVER_VERSION "$Revision: 1.1 $" +#define DRIVER_VERSION "$Revision: 1.17 $" /* Two simple wrapper macros, saves a few keystrokes. */ #define rtc_read(x) i2c_readreg(RTC_I2C_READ, x) #define rtc_write(x,y) i2c_writereg(RTC_I2C_WRITE, x, y) +static DEFINE_MUTEX(rtc_lock); /* Protect state etc */ + static const unsigned char days_in_month[] = { 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 }; int pcf8563_ioctl(struct inode *, struct file *, unsigned int, unsigned long); -int pcf8563_open(struct inode *, struct file *); -int pcf8563_release(struct inode *, struct file *); + +/* Cache VL bit value read at driver init since writing the RTC_SECOND + * register clears the VL status. + */ +static int voltage_low; static const struct file_operations pcf8563_fops = { .owner = THIS_MODULE, - .ioctl = pcf8563_ioctl, - .open = pcf8563_open, - .release = pcf8563_release, + .ioctl = pcf8563_ioctl }; unsigned char @@ -62,7 +66,7 @@ pcf8563_readreg(int reg) { unsigned char res = rtc_read(reg); - /* The PCF8563 does not return 0 for unimplemented bits */ + /* The PCF8563 does not return 0 for unimplemented bits. */ switch (reg) { case RTC_SECONDS: case RTC_MINUTES: @@ -95,11 +99,6 @@ pcf8563_readreg(int reg) void pcf8563_writereg(int reg, unsigned char val) { -#ifdef CONFIG_ETRAX_RTC_READONLY - if (reg == RTC_CONTROL1 || (reg >= RTC_SECONDS && reg <= RTC_YEAR)) - return; -#endif - rtc_write(reg, val); } @@ -114,11 +113,13 @@ get_rtc_time(struct rtc_time *tm) tm->tm_mon = rtc_read(RTC_MONTH); tm->tm_year = rtc_read(RTC_YEAR); - if (tm->tm_sec & 0x80) - printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time " + if (tm->tm_sec & 0x80) { + printk(KERN_ERR "%s: RTC Voltage Low - reliable date/time " "information is no longer guaranteed!\n", PCF8563_NAME); + } - tm->tm_year = BCD_TO_BIN(tm->tm_year) + ((tm->tm_mon & 0x80) ? 100 : 0); + tm->tm_year = BCD_TO_BIN(tm->tm_year) + + ((tm->tm_mon & 0x80) ? 100 : 0); tm->tm_sec &= 0x7F; tm->tm_min &= 0x7F; tm->tm_hour &= 0x3F; @@ -137,8 +138,19 @@ get_rtc_time(struct rtc_time *tm) int __init pcf8563_init(void) { + static int res; + static int first = 1; + + if (!first) + return res; + first = 0; + /* Initiate the i2c protocol. */ - i2c_init(); + res = i2c_init(); + if (res < 0) { + printk(KERN_CRIT "pcf8563_init: Failed to init i2c.\n"); + return res; + } /* * First of all we need to reset the chip. This is done by @@ -170,24 +182,20 @@ pcf8563_init(void) if (rtc_write(RTC_WEEKDAY_ALARM, 0x80) < 0) goto err; - if (register_chrdev(PCF8563_MAJOR, DEVICE_NAME, &pcf8563_fops) < 0) { - printk(KERN_INFO "%s: Unable to get major number %d for RTC device.\n", - PCF8563_NAME, PCF8563_MAJOR); - return -1; + /* Check for low voltage, and warn about it. */ + if (rtc_read(RTC_SECONDS) & 0x80) { + voltage_low = 1; + printk(KERN_WARNING "%s: RTC Voltage Low - reliable " + "date/time information is no longer guaranteed!\n", + PCF8563_NAME); } - printk(KERN_INFO "%s Real-Time Clock Driver, %s\n", PCF8563_NAME, DRIVER_VERSION); - - /* Check for low voltage, and warn about it.. */ - if (rtc_read(RTC_SECONDS) & 0x80) - printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time " - "information is no longer guaranteed!\n", PCF8563_NAME); - - return 0; + return res; err: printk(KERN_INFO "%s: Error initializing chip.\n", PCF8563_NAME); - return -1; + res = -1; + return res; } void __exit @@ -200,8 +208,8 @@ pcf8563_exit(void) * ioctl calls for this driver. Why return -ENOTTY upon error? Because * POSIX says so! */ -int -pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg) +int pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, + unsigned long arg) { /* Some sanity checks. */ if (_IOC_TYPE(cmd) != RTC_MAGIC) @@ -211,125 +219,147 @@ pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned return -ENOTTY; switch (cmd) { - case RTC_RD_TIME: - { - struct rtc_time tm; - - memset(&tm, 0, sizeof (struct rtc_time)); - get_rtc_time(&tm); - - if (copy_to_user((struct rtc_time *) arg, &tm, sizeof tm)) { - return -EFAULT; - } - - return 0; + case RTC_RD_TIME: + { + struct rtc_time tm; + + mutex_lock(&rtc_lock); + memset(&tm, 0, sizeof tm); + get_rtc_time(&tm); + + if (copy_to_user((struct rtc_time *) arg, &tm, + sizeof tm)) { + spin_unlock(&rtc_lock); + return -EFAULT; } - case RTC_SET_TIME: - { -#ifdef CONFIG_ETRAX_RTC_READONLY + mutex_unlock(&rtc_lock); + + return 0; + } + case RTC_SET_TIME: + { + int leap; + int year; + int century; + struct rtc_time tm; + + memset(&tm, 0, sizeof tm); + if (!capable(CAP_SYS_TIME)) return -EPERM; -#else - int leap; - int year; - int century; - struct rtc_time tm; - - if (!capable(CAP_SYS_TIME)) - return -EPERM; - - if (copy_from_user(&tm, (struct rtc_time *) arg, sizeof tm)) - return -EFAULT; - - /* Convert from struct tm to struct rtc_time. */ - tm.tm_year += 1900; - tm.tm_mon += 1; - - /* - * Check if tm.tm_year is a leap year. A year is a leap - * year if it is divisible by 4 but not 100, except - * that years divisible by 400 _are_ leap years. - */ - year = tm.tm_year; - leap = (tm.tm_mon == 2) && ((year % 4 == 0 && year % 100 != 0) || year % 400 == 0); - - /* Perform some sanity checks. */ - if ((tm.tm_year < 1970) || - (tm.tm_mon > 12) || - (tm.tm_mday == 0) || - (tm.tm_mday > days_in_month[tm.tm_mon] + leap) || - (tm.tm_wday >= 7) || - (tm.tm_hour >= 24) || - (tm.tm_min >= 60) || - (tm.tm_sec >= 60)) - return -EINVAL; - - century = (tm.tm_year >= 2000) ? 0x80 : 0; - tm.tm_year = tm.tm_year % 100; - - BIN_TO_BCD(tm.tm_year); - BIN_TO_BCD(tm.tm_mday); - BIN_TO_BCD(tm.tm_hour); - BIN_TO_BCD(tm.tm_min); - BIN_TO_BCD(tm.tm_sec); - tm.tm_mon |= century; - - rtc_write(RTC_YEAR, tm.tm_year); - rtc_write(RTC_MONTH, tm.tm_mon); - rtc_write(RTC_WEEKDAY, tm.tm_wday); /* Not coded in BCD. */ - rtc_write(RTC_DAY_OF_MONTH, tm.tm_mday); - rtc_write(RTC_HOURS, tm.tm_hour); - rtc_write(RTC_MINUTES, tm.tm_min); - rtc_write(RTC_SECONDS, tm.tm_sec); - - return 0; -#endif /* !CONFIG_ETRAX_RTC_READONLY */ - } - case RTC_VLOW_RD: - { - int vl_bit = 0; + if (copy_from_user(&tm, (struct rtc_time *) arg, + sizeof tm)) + return -EFAULT; + + /* Convert from struct tm to struct rtc_time. */ + tm.tm_year += 1900; + tm.tm_mon += 1; + + /* + * Check if tm.tm_year is a leap year. A year is a leap + * year if it is divisible by 4 but not 100, except + * that years divisible by 400 _are_ leap years. + */ + year = tm.tm_year; + leap = (tm.tm_mon == 2) && + ((year % 4 == 0 && year % 100 != 0) || year % 400 == 0); + + /* Perform some sanity checks. */ + if ((tm.tm_year < 1970) || + (tm.tm_mon > 12) || + (tm.tm_mday == 0) || + (tm.tm_mday > days_in_month[tm.tm_mon] + leap) || + (tm.tm_wday >= 7) || + (tm.tm_hour >= 24) || + (tm.tm_min >= 60) || + (tm.tm_sec >= 60)) + return -EINVAL; + + century = (tm.tm_year >= 2000) ? 0x80 : 0; + tm.tm_year = tm.tm_year % 100; + + BIN_TO_BCD(tm.tm_year); + BIN_TO_BCD(tm.tm_mon); + BIN_TO_BCD(tm.tm_mday); + BIN_TO_BCD(tm.tm_hour); + BIN_TO_BCD(tm.tm_min); + BIN_TO_BCD(tm.tm_sec); + tm.tm_mon |= century; + + mutex_lock(&rtc_lock); + + rtc_write(RTC_YEAR, tm.tm_year); + rtc_write(RTC_MONTH, tm.tm_mon); + rtc_write(RTC_WEEKDAY, tm.tm_wday); /* Not coded in BCD. */ + rtc_write(RTC_DAY_OF_MONTH, tm.tm_mday); + rtc_write(RTC_HOURS, tm.tm_hour); + rtc_write(RTC_MINUTES, tm.tm_min); + rtc_write(RTC_SECONDS, tm.tm_sec); + + mutex_unlock(&rtc_lock); + + return 0; + } + case RTC_VL_READ: + if (voltage_low) + printk(KERN_ERR "%s: RTC Voltage Low - " + "reliable date/time information is no " + "longer guaranteed!\n", PCF8563_NAME); - if (rtc_read(RTC_SECONDS) & 0x80) { - vl_bit = 1; - printk(KERN_WARNING "%s: RTC Voltage Low - reliable " - "date/time information is no longer guaranteed!\n", - PCF8563_NAME); - } - if (copy_to_user((int *) arg, &vl_bit, sizeof(int))) - return -EFAULT; + if (copy_to_user((int *) arg, &voltage_low, sizeof(int))) + return -EFAULT; + return 0; - return 0; - } + case RTC_VL_CLR: + { + /* Clear the VL bit in the seconds register in case + * the time has not been set already (which would + * have cleared it). This does not really matter + * because of the cached voltage_low value but do it + * anyway for consistency. */ - case RTC_VLOW_SET: - { - /* Clear the VL bit in the seconds register */ - int ret = rtc_read(RTC_SECONDS); + int ret = rtc_read(RTC_SECONDS); - rtc_write(RTC_SECONDS, (ret & 0x7F)); + rtc_write(RTC_SECONDS, (ret & 0x7F)); - return 0; - } + /* Clear the cached value. */ + voltage_low = 0; - default: - return -ENOTTY; + return 0; + } + default: + return -ENOTTY; } return 0; } -int -pcf8563_open(struct inode *inode, struct file *filp) +static int __init pcf8563_register(void) { - return 0; -} + if (pcf8563_init() < 0) { + printk(KERN_INFO "%s: Unable to initialize Real-Time Clock " + "Driver, %s\n", PCF8563_NAME, DRIVER_VERSION); + return -1; + } + + if (register_chrdev(PCF8563_MAJOR, DEVICE_NAME, &pcf8563_fops) < 0) { + printk(KERN_INFO "%s: Unable to get major numer %d for RTC " + "device.\n", PCF8563_NAME, PCF8563_MAJOR); + return -1; + } + + printk(KERN_INFO "%s Real-Time Clock Driver, %s\n", PCF8563_NAME, + DRIVER_VERSION); + + /* Check for low voltage, and warn about it. */ + if (voltage_low) { + printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time " + "information is no longer guaranteed!\n", PCF8563_NAME); + } -int -pcf8563_release(struct inode *inode, struct file *filp) -{ return 0; } -module_init(pcf8563_init); +module_init(pcf8563_register); module_exit(pcf8563_exit); diff --git a/arch/cris/arch-v32/drivers/sync_serial.c b/arch/cris/arch-v32/drivers/sync_serial.c index d581b0a92a3f..47c377df6fb3 100644 --- a/arch/cris/arch-v32/drivers/sync_serial.c +++ b/arch/cris/arch-v32/drivers/sync_serial.c @@ -1,5 +1,5 @@ /* - * Simple synchronous serial port driver for ETRAX FS. + * Simple synchronous serial port driver for ETRAX FS and Artpec-3. * * Copyright (c) 2005 Axis Communications AB * @@ -21,17 +21,18 @@ #include <linux/spinlock.h> #include <asm/io.h> -#include <asm/arch/dma.h> -#include <asm/arch/pinmux.h> -#include <asm/arch/hwregs/reg_rdwr.h> -#include <asm/arch/hwregs/sser_defs.h> -#include <asm/arch/hwregs/dma_defs.h> -#include <asm/arch/hwregs/dma.h> -#include <asm/arch/hwregs/intr_vect_defs.h> -#include <asm/arch/hwregs/intr_vect.h> -#include <asm/arch/hwregs/reg_map.h> +#include <dma.h> +#include <pinmux.h> +#include <hwregs/reg_rdwr.h> +#include <hwregs/sser_defs.h> +#include <hwregs/dma_defs.h> +#include <hwregs/dma.h> +#include <hwregs/intr_vect_defs.h> +#include <hwregs/intr_vect.h> +#include <hwregs/reg_map.h> #include <asm/sync_serial.h> + /* The receiver is a bit tricky beacuse of the continuous stream of data.*/ /* */ /* Three DMA descriptors are linked together. Each DMA descriptor is */ @@ -63,8 +64,10 @@ /* words can be handled */ #define IN_BUFFER_SIZE 12288 #define IN_DESCR_SIZE 256 -#define NUM_IN_DESCR (IN_BUFFER_SIZE/IN_DESCR_SIZE) -#define OUT_BUFFER_SIZE 4096 +#define NBR_IN_DESCR (IN_BUFFER_SIZE/IN_DESCR_SIZE) + +#define OUT_BUFFER_SIZE 1024*8 +#define NBR_OUT_DESCR 8 #define DEFAULT_FRAME_RATE 0 #define DEFAULT_WORD_RATE 7 @@ -78,6 +81,8 @@ #define DEBUGPOLL(x) #define DEBUGRXINT(x) #define DEBUGTXINT(x) +#define DEBUGTRDMA(x) +#define DEBUGOUTBUF(x) typedef struct sync_port { @@ -97,10 +102,11 @@ typedef struct sync_port int output; int input; - volatile unsigned int out_count; /* Remaining bytes for current transfer */ - unsigned char* outp; /* Current position in out_buffer */ - volatile unsigned char* volatile readp; /* Next byte to be read by application */ - volatile unsigned char* volatile writep; /* Next byte to be written by etrax */ + /* Next byte to be read by application */ + volatile unsigned char *volatile readp; + /* Next byte to be written by etrax */ + volatile unsigned char *volatile writep; + unsigned int in_buffer_size; unsigned int inbufchunk; unsigned char out_buffer[OUT_BUFFER_SIZE] __attribute__ ((aligned(32))); @@ -108,11 +114,30 @@ typedef struct sync_port unsigned char flip[IN_BUFFER_SIZE] __attribute__ ((aligned(32))); struct dma_descr_data* next_rx_desc; struct dma_descr_data* prev_rx_desc; + + /* Pointer to the first available descriptor in the ring, + * unless active_tr_descr == catch_tr_descr and a dma + * transfer is active */ + struct dma_descr_data *active_tr_descr; + + /* Pointer to the first allocated descriptor in the ring */ + struct dma_descr_data *catch_tr_descr; + + /* Pointer to the descriptor with the current end-of-list */ + struct dma_descr_data *prev_tr_descr; int full; - dma_descr_data in_descr[NUM_IN_DESCR] __attribute__ ((__aligned__(16))); + /* Pointer to the first byte being read by DMA + * or current position in out_buffer if not using DMA. */ + unsigned char *out_rd_ptr; + + /* Number of bytes currently locked for being read by DMA */ + int out_buf_count; + + dma_descr_data in_descr[NBR_IN_DESCR] __attribute__ ((__aligned__(16))); dma_descr_context in_context __attribute__ ((__aligned__(32))); - dma_descr_data out_descr __attribute__ ((__aligned__(16))); + dma_descr_data out_descr[NBR_OUT_DESCR] + __attribute__ ((__aligned__(16))); dma_descr_context out_context __attribute__ ((__aligned__(32))); wait_queue_head_t out_wait_q; wait_queue_head_t in_wait_q; @@ -143,11 +168,11 @@ static ssize_t sync_serial_read(struct file *file, char *buf, #endif static void send_word(sync_port* port); -static void start_dma(struct sync_port *port, const char* data, int count); +static void start_dma_out(struct sync_port *port, const char *data, int count); static void start_dma_in(sync_port* port); #ifdef SYNC_SER_DMA -static irqreturn_t tr_interrupt(int irq, void *dev_id, struct pt_regs * regs); -static irqreturn_t rx_interrupt(int irq, void *dev_id, struct pt_regs * regs); +static irqreturn_t tr_interrupt(int irq, void *dev_id); +static irqreturn_t rx_interrupt(int irq, void *dev_id); #endif #if (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \ @@ -157,22 +182,49 @@ static irqreturn_t rx_interrupt(int irq, void *dev_id, struct pt_regs * regs); #define SYNC_SER_MANUAL #endif #ifdef SYNC_SER_MANUAL -static irqreturn_t manual_interrupt(int irq, void *dev_id, struct pt_regs * regs); +static irqreturn_t manual_interrupt(int irq, void *dev_id); +#endif + +#ifdef CONFIG_ETRAXFS /* ETRAX FS */ +#define OUT_DMA_NBR 4 +#define IN_DMA_NBR 5 +#define PINMUX_SSER pinmux_sser0 +#define SYNCSER_INST regi_sser0 +#define SYNCSER_INTR_VECT SSER0_INTR_VECT +#define OUT_DMA_INST regi_dma4 +#define IN_DMA_INST regi_dma5 +#define DMA_OUT_INTR_VECT DMA4_INTR_VECT +#define DMA_IN_INTR_VECT DMA5_INTR_VECT +#define REQ_DMA_SYNCSER dma_sser0 +#else /* Artpec-3 */ +#define OUT_DMA_NBR 6 +#define IN_DMA_NBR 7 +#define PINMUX_SSER pinmux_sser +#define SYNCSER_INST regi_sser +#define SYNCSER_INTR_VECT SSER_INTR_VECT +#define OUT_DMA_INST regi_dma6 +#define IN_DMA_INST regi_dma7 +#define DMA_OUT_INTR_VECT DMA6_INTR_VECT +#define DMA_IN_INTR_VECT DMA7_INTR_VECT +#define REQ_DMA_SYNCSER dma_sser #endif /* The ports */ static struct sync_port ports[]= { { - .regi_sser = regi_sser0, - .regi_dmaout = regi_dma4, - .regi_dmain = regi_dma5, + .regi_sser = SYNCSER_INST, + .regi_dmaout = OUT_DMA_INST, + .regi_dmain = IN_DMA_INST, #if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA) .use_dma = 1, #else .use_dma = 0, #endif - }, + } +#ifdef CONFIG_ETRAXFS + , + { .regi_sser = regi_sser1, .regi_dmaout = regi_dma6, @@ -183,9 +235,10 @@ static struct sync_port ports[]= .use_dma = 0, #endif } +#endif }; -#define NUMBER_OF_PORTS ARRAY_SIZE(ports) +#define NBR_PORTS ARRAY_SIZE(ports) static const struct file_operations sync_serial_fops = { .owner = THIS_MODULE, @@ -200,19 +253,21 @@ static const struct file_operations sync_serial_fops = { static int __init etrax_sync_serial_init(void) { ports[0].enabled = 0; +#ifdef CONFIG_ETRAXFS ports[1].enabled = 0; - - if (register_chrdev(SYNC_SERIAL_MAJOR,"sync serial", &sync_serial_fops) <0 ) - { - printk("unable to get major for synchronous serial port\n"); +#endif + if (register_chrdev(SYNC_SERIAL_MAJOR, "sync serial", + &sync_serial_fops) < 0) { + printk(KERN_WARNING + "Unable to get major for synchronous serial port\n"); return -EBUSY; } /* Initialize Ports */ #if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) - if (crisv32_pinmux_alloc_fixed(pinmux_sser0)) - { - printk("Unable to allocate pins for syncrhronous serial port 0\n"); + if (crisv32_pinmux_alloc_fixed(PINMUX_SSER)) { + printk(KERN_WARNING + "Unable to alloc pins for synchronous serial port 0\n"); return -EIO; } ports[0].enabled = 1; @@ -220,33 +275,40 @@ static int __init etrax_sync_serial_init(void) #endif #if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) - if (crisv32_pinmux_alloc_fixed(pinmux_sser1)) - { - printk("Unable to allocate pins for syncrhronous serial port 0\n"); + if (crisv32_pinmux_alloc_fixed(pinmux_sser1)) { + printk(KERN_WARNING + "Unable to alloc pins for synchronous serial port 0\n"); return -EIO; } ports[1].enabled = 1; initialize_port(1); #endif - printk("ETRAX FS synchronous serial port driver\n"); +#ifdef CONFIG_ETRAXFS + printk(KERN_INFO "ETRAX FS synchronous serial port driver\n"); +#else + printk(KERN_INFO "Artpec-3 synchronous serial port driver\n"); +#endif return 0; } static void __init initialize_port(int portnbr) { - struct sync_port* port = &ports[portnbr]; + int __attribute__((unused)) i; + struct sync_port *port = &ports[portnbr]; reg_sser_rw_cfg cfg = {0}; reg_sser_rw_frm_cfg frm_cfg = {0}; reg_sser_rw_tr_cfg tr_cfg = {0}; reg_sser_rw_rec_cfg rec_cfg = {0}; - DEBUG(printk("Init sync serial port %d\n", portnbr)); + DEBUG(printk(KERN_DEBUG "Init sync serial port %d\n", portnbr)); port->port_nbr = portnbr; port->init_irqs = 1; - port->outp = port->out_buffer; + port->out_rd_ptr = port->out_buffer; + port->out_buf_count = 0; + port->output = 1; port->input = 0; @@ -255,7 +317,7 @@ static void __init initialize_port(int portnbr) port->in_buffer_size = IN_BUFFER_SIZE; port->inbufchunk = IN_DESCR_SIZE; port->next_rx_desc = &port->in_descr[0]; - port->prev_rx_desc = &port->in_descr[NUM_IN_DESCR-1]; + port->prev_rx_desc = &port->in_descr[NBR_IN_DESCR-1]; port->prev_rx_desc->eol = 1; init_waitqueue_head(&port->out_wait_q); @@ -286,8 +348,13 @@ static void __init initialize_port(int portnbr) tr_cfg.sample_size = 7; tr_cfg.sh_dir = regk_sser_msbfirst; tr_cfg.use_dma = port->use_dma ? regk_sser_yes : regk_sser_no; +#if 0 tr_cfg.rate_ctrl = regk_sser_bulk; tr_cfg.data_pin_use = regk_sser_dout; +#else + tr_cfg.rate_ctrl = regk_sser_iso; + tr_cfg.data_pin_use = regk_sser_dout; +#endif tr_cfg.bulk_wspace = 1; REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg); @@ -296,6 +363,27 @@ static void __init initialize_port(int portnbr) rec_cfg.use_dma = port->use_dma ? regk_sser_yes : regk_sser_no; rec_cfg.fifo_thr = regk_sser_inf; REG_WR(sser, port->regi_sser, rw_rec_cfg, rec_cfg); + +#ifdef SYNC_SER_DMA + /* Setup the descriptor ring for dma out/transmit. */ + for (i = 0; i < NBR_OUT_DESCR; i++) { + port->out_descr[i].wait = 0; + port->out_descr[i].intr = 1; + port->out_descr[i].eol = 0; + port->out_descr[i].out_eop = 0; + port->out_descr[i].next = + (dma_descr_data *)virt_to_phys(&port->out_descr[i+1]); + } + + /* Create a ring from the list. */ + port->out_descr[NBR_OUT_DESCR-1].next = + (dma_descr_data *)virt_to_phys(&port->out_descr[0]); + + /* Setup context for traversing the ring. */ + port->active_tr_descr = &port->out_descr[0]; + port->prev_tr_descr = &port->out_descr[NBR_OUT_DESCR-1]; + port->catch_tr_descr = &port->out_descr[0]; +#endif } static inline int sync_data_avail(struct sync_port *port) @@ -311,7 +399,7 @@ static inline int sync_data_avail(struct sync_port *port) * ^rp ^wp ^wp ^rp */ - if (end >= start) + if (end >= start) avail = end - start; else avail = port->in_buffer_size - (start - end); @@ -331,7 +419,7 @@ static inline int sync_data_avail_to_end(struct sync_port *port) * ^rp ^wp ^wp ^rp */ - if (end >= start) + if (end >= start) avail = end - start; else avail = port->flip + port->in_buffer_size - start; @@ -341,66 +429,69 @@ static inline int sync_data_avail_to_end(struct sync_port *port) static int sync_serial_open(struct inode *inode, struct file *file) { int dev = iminor(inode); - sync_port* port; + sync_port *port; reg_dma_rw_cfg cfg = {.en = regk_dma_yes}; reg_dma_rw_intr_mask intr_mask = {.data = regk_dma_yes}; - DEBUG(printk("Open sync serial port %d\n", dev)); + DEBUG(printk(KERN_DEBUG "Open sync serial port %d\n", dev)); - if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) + if (dev < 0 || dev >= NBR_PORTS || !ports[dev].enabled) { - DEBUG(printk("Invalid minor %d\n", dev)); + DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev)); return -ENODEV; } port = &ports[dev]; /* Allow open this device twice (assuming one reader and one writer) */ if (port->busy == 2) { - DEBUG(printk("Device is busy.. \n")); + DEBUG(printk(KERN_DEBUG "Device is busy.. \n")); return -EBUSY; } + + if (port->init_irqs) { if (port->use_dma) { - if (port == &ports[0]){ + if (port == &ports[0]) { #ifdef SYNC_SER_DMA - if(request_irq(DMA4_INTR_VECT, - tr_interrupt, - 0, - "synchronous serial 0 dma tr", - &ports[0])) { + if (request_irq(DMA_OUT_INTR_VECT, + tr_interrupt, + 0, + "synchronous serial 0 dma tr", + &ports[0])) { printk(KERN_CRIT "Can't allocate sync serial port 0 IRQ"); return -EBUSY; - } else if(request_irq(DMA5_INTR_VECT, - rx_interrupt, - 0, - "synchronous serial 1 dma rx", - &ports[0])) { - free_irq(DMA4_INTR_VECT, &port[0]); + } else if (request_irq(DMA_IN_INTR_VECT, + rx_interrupt, + 0, + "synchronous serial 1 dma rx", + &ports[0])) { + free_irq(DMA_OUT_INTR_VECT, &port[0]); printk(KERN_CRIT "Can't allocate sync serial port 0 IRQ"); return -EBUSY; - } else if (crisv32_request_dma(SYNC_SER0_TX_DMA_NBR, - "synchronous serial 0 dma tr", - DMA_VERBOSE_ON_ERROR, - 0, - dma_sser0)) { - free_irq(DMA4_INTR_VECT, &port[0]); - free_irq(DMA5_INTR_VECT, &port[0]); + } else if (crisv32_request_dma(OUT_DMA_NBR, + "synchronous serial 0 dma tr", + DMA_VERBOSE_ON_ERROR, + 0, + REQ_DMA_SYNCSER)) { + free_irq(DMA_OUT_INTR_VECT, &port[0]); + free_irq(DMA_IN_INTR_VECT, &port[0]); printk(KERN_CRIT "Can't allocate sync serial port 0 TX DMA channel"); return -EBUSY; - } else if (crisv32_request_dma(SYNC_SER0_RX_DMA_NBR, - "synchronous serial 0 dma rec", - DMA_VERBOSE_ON_ERROR, - 0, - dma_sser0)) { - crisv32_free_dma(SYNC_SER0_TX_DMA_NBR); - free_irq(DMA4_INTR_VECT, &port[0]); - free_irq(DMA5_INTR_VECT, &port[0]); + } else if (crisv32_request_dma(IN_DMA_NBR, + "synchronous serial 0 dma rec", + DMA_VERBOSE_ON_ERROR, + 0, + REQ_DMA_SYNCSER)) { + crisv32_free_dma(OUT_DMA_NBR); + free_irq(DMA_OUT_INTR_VECT, &port[0]); + free_irq(DMA_IN_INTR_VECT, &port[0]); printk(KERN_CRIT "Can't allocate sync serial port 1 RX DMA channel"); return -EBUSY; } #endif } - else if (port == &ports[1]){ +#ifdef CONFIG_ETRAXFS + else if (port == &ports[1]) { #ifdef SYNC_SER_DMA if (request_irq(DMA6_INTR_VECT, tr_interrupt, @@ -417,20 +508,22 @@ static int sync_serial_open(struct inode *inode, struct file *file) free_irq(DMA6_INTR_VECT, &ports[1]); printk(KERN_CRIT "Can't allocate sync serial port 3 IRQ"); return -EBUSY; - } else if (crisv32_request_dma(SYNC_SER1_TX_DMA_NBR, - "synchronous serial 1 dma tr", - DMA_VERBOSE_ON_ERROR, - 0, - dma_sser1)) { - free_irq(21, &ports[1]); - free_irq(20, &ports[1]); + } else if (crisv32_request_dma( + SYNC_SER1_TX_DMA_NBR, + "synchronous serial 1 dma tr", + DMA_VERBOSE_ON_ERROR, + 0, + dma_sser1)) { + free_irq(DMA6_INTR_VECT, &ports[1]); + free_irq(DMA7_INTR_VECT, &ports[1]); printk(KERN_CRIT "Can't allocate sync serial port 3 TX DMA channel"); return -EBUSY; - } else if (crisv32_request_dma(SYNC_SER1_RX_DMA_NBR, - "synchronous serial 3 dma rec", - DMA_VERBOSE_ON_ERROR, - 0, - dma_sser1)) { + } else if (crisv32_request_dma( + SYNC_SER1_RX_DMA_NBR, + "synchronous serial 3 dma rec", + DMA_VERBOSE_ON_ERROR, + 0, + dma_sser1)) { crisv32_free_dma(SYNC_SER1_TX_DMA_NBR); free_irq(DMA6_INTR_VECT, &ports[1]); free_irq(DMA7_INTR_VECT, &ports[1]); @@ -439,14 +532,14 @@ static int sync_serial_open(struct inode *inode, struct file *file) } #endif } - +#endif /* Enable DMAs */ REG_WR(dma, port->regi_dmain, rw_cfg, cfg); REG_WR(dma, port->regi_dmaout, rw_cfg, cfg); /* Enable DMA IRQs */ REG_WR(dma, port->regi_dmain, rw_intr_mask, intr_mask); REG_WR(dma, port->regi_dmaout, rw_intr_mask, intr_mask); - /* Set up wordsize = 2 for DMAs. */ + /* Set up wordsize = 1 for DMAs. */ DMA_WR_CMD (port->regi_dmain, regk_dma_set_w_size1); DMA_WR_CMD (port->regi_dmaout, regk_dma_set_w_size1); @@ -455,7 +548,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) } else { /* !port->use_dma */ #ifdef SYNC_SER_MANUAL if (port == &ports[0]) { - if (request_irq(SSER0_INTR_VECT, + if (request_irq(SYNCSER_INTR_VECT, manual_interrupt, 0, "synchronous serial manual irq", @@ -463,7 +556,9 @@ static int sync_serial_open(struct inode *inode, struct file *file) printk("Can't allocate sync serial manual irq"); return -EBUSY; } - } else if (port == &ports[1]) { + } +#ifdef CONFIG_ETRAXFS + else if (port == &ports[1]) { if (request_irq(SSER1_INTR_VECT, manual_interrupt, 0, @@ -473,11 +568,13 @@ static int sync_serial_open(struct inode *inode, struct file *file) return -EBUSY; } } +#endif port->init_irqs = 0; #else panic("sync_serial: Manual mode not supported.\n"); #endif /* SYNC_SER_MANUAL */ } + } /* port->init_irqs */ port->busy++; @@ -487,9 +584,9 @@ static int sync_serial_open(struct inode *inode, struct file *file) static int sync_serial_release(struct inode *inode, struct file *file) { int dev = iminor(inode); - sync_port* port; + sync_port *port; - if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) + if (dev < 0 || dev >= NBR_PORTS || !ports[dev].enabled) { DEBUG(printk("Invalid minor %d\n", dev)); return -ENODEV; @@ -506,17 +603,37 @@ static unsigned int sync_serial_poll(struct file *file, poll_table *wait) { int dev = iminor(file->f_path.dentry->d_inode); unsigned int mask = 0; - sync_port* port; + sync_port *port; DEBUGPOLL( static unsigned int prev_mask = 0; ); port = &ports[dev]; + + if (!port->started) { + reg_sser_rw_cfg cfg = REG_RD(sser, port->regi_sser, rw_cfg); + reg_sser_rw_rec_cfg rec_cfg = + REG_RD(sser, port->regi_sser, rw_rec_cfg); + cfg.en = regk_sser_yes; + rec_cfg.rec_en = port->input; + REG_WR(sser, port->regi_sser, rw_cfg, cfg); + REG_WR(sser, port->regi_sser, rw_rec_cfg, rec_cfg); + port->started = 1; + } + poll_wait(file, &port->out_wait_q, wait); poll_wait(file, &port->in_wait_q, wait); - /* Some room to write */ - if (port->out_count < OUT_BUFFER_SIZE) + + /* No active transfer, descriptors are available */ + if (port->output && !port->tr_running) + mask |= POLLOUT | POLLWRNORM; + + /* Descriptor and buffer space available. */ + if (port->output && + port->active_tr_descr != port->catch_tr_descr && + port->out_buf_count < OUT_BUFFER_SIZE) mask |= POLLOUT | POLLWRNORM; + /* At least an inbufchunk of data */ - if (sync_data_avail(port) >= port->inbufchunk) + if (port->input && sync_data_avail(port) >= port->inbufchunk) mask |= POLLIN | POLLRDNORM; DEBUGPOLL(if (mask != prev_mask) @@ -531,15 +648,16 @@ static int sync_serial_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { int return_val = 0; + int dma_w_size = regk_dma_set_w_size1; int dev = iminor(file->f_path.dentry->d_inode); - sync_port* port; + sync_port *port; reg_sser_rw_tr_cfg tr_cfg; reg_sser_rw_rec_cfg rec_cfg; reg_sser_rw_frm_cfg frm_cfg; reg_sser_rw_cfg gen_cfg; reg_sser_rw_intr_mask intr_mask; - if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) + if (dev < 0 || dev >= NBR_PORTS || !ports[dev].enabled) { DEBUG(printk("Invalid minor %d\n", dev)); return -1; @@ -558,61 +676,81 @@ static int sync_serial_ioctl(struct inode *inode, struct file *file, case SSP_SPEED: if (GET_SPEED(arg) == CODEC) { + unsigned int freq; + gen_cfg.base_freq = regk_sser_f32; - /* FREQ = 0 => 4 MHz => clk_div = 7*/ - gen_cfg.clk_div = 6 + (1 << GET_FREQ(arg)); - } - else - { + + /* Clock divider will internally be + * gen_cfg.clk_div + 1. + */ + + freq = GET_FREQ(arg); + switch (freq) { + case FREQ_32kHz: + case FREQ_64kHz: + case FREQ_128kHz: + case FREQ_256kHz: + gen_cfg.clk_div = 125 * + (1 << (freq - FREQ_256kHz)) - 1; + break; + case FREQ_512kHz: + gen_cfg.clk_div = 62; + break; + case FREQ_1MHz: + case FREQ_2MHz: + case FREQ_4MHz: + gen_cfg.clk_div = 8 * (1 << freq) - 1; + break; + } + } else { gen_cfg.base_freq = regk_sser_f29_493; - switch (GET_SPEED(arg)) - { - case SSP150: - gen_cfg.clk_div = 29493000 / (150 * 8) - 1; - break; - case SSP300: - gen_cfg.clk_div = 29493000 / (300 * 8) - 1; - break; - case SSP600: - gen_cfg.clk_div = 29493000 / (600 * 8) - 1; - break; - case SSP1200: - gen_cfg.clk_div = 29493000 / (1200 * 8) - 1; - break; - case SSP2400: - gen_cfg.clk_div = 29493000 / (2400 * 8) - 1; - break; - case SSP4800: - gen_cfg.clk_div = 29493000 / (4800 * 8) - 1; - break; - case SSP9600: - gen_cfg.clk_div = 29493000 / (9600 * 8) - 1; - break; - case SSP19200: - gen_cfg.clk_div = 29493000 / (19200 * 8) - 1; - break; - case SSP28800: - gen_cfg.clk_div = 29493000 / (28800 * 8) - 1; - break; - case SSP57600: - gen_cfg.clk_div = 29493000 / (57600 * 8) - 1; - break; - case SSP115200: - gen_cfg.clk_div = 29493000 / (115200 * 8) - 1; - break; - case SSP230400: - gen_cfg.clk_div = 29493000 / (230400 * 8) - 1; - break; - case SSP460800: - gen_cfg.clk_div = 29493000 / (460800 * 8) - 1; - break; - case SSP921600: - gen_cfg.clk_div = 29493000 / (921600 * 8) - 1; - break; - case SSP3125000: - gen_cfg.base_freq = regk_sser_f100; - gen_cfg.clk_div = 100000000 / (3125000 * 8) - 1; - break; + switch (GET_SPEED(arg)) { + case SSP150: + gen_cfg.clk_div = 29493000 / (150 * 8) - 1; + break; + case SSP300: + gen_cfg.clk_div = 29493000 / (300 * 8) - 1; + break; + case SSP600: + gen_cfg.clk_div = 29493000 / (600 * 8) - 1; + break; + case SSP1200: + gen_cfg.clk_div = 29493000 / (1200 * 8) - 1; + break; + case SSP2400: + gen_cfg.clk_div = 29493000 / (2400 * 8) - 1; + break; + case SSP4800: + gen_cfg.clk_div = 29493000 / (4800 * 8) - 1; + break; + case SSP9600: + gen_cfg.clk_div = 29493000 / (9600 * 8) - 1; + break; + case SSP19200: + gen_cfg.clk_div = 29493000 / (19200 * 8) - 1; + break; + case SSP28800: + gen_cfg.clk_div = 29493000 / (28800 * 8) - 1; + break; + case SSP57600: + gen_cfg.clk_div = 29493000 / (57600 * 8) - 1; + break; + case SSP115200: + gen_cfg.clk_div = 29493000 / (115200 * 8) - 1; + break; + case SSP230400: + gen_cfg.clk_div = 29493000 / (230400 * 8) - 1; + break; + case SSP460800: + gen_cfg.clk_div = 29493000 / (460800 * 8) - 1; + break; + case SSP921600: + gen_cfg.clk_div = 29493000 / (921600 * 8) - 1; + break; + case SSP3125000: + gen_cfg.base_freq = regk_sser_f100; + gen_cfg.clk_div = 100000000 / (3125000 * 8) - 1; + break; } } @@ -625,46 +763,60 @@ static int sync_serial_ioctl(struct inode *inode, struct file *file, case MASTER_OUTPUT: port->output = 1; port->input = 0; + frm_cfg.out_on = regk_sser_tr; + frm_cfg.frame_pin_dir = regk_sser_out; gen_cfg.clk_dir = regk_sser_out; break; case SLAVE_OUTPUT: port->output = 1; port->input = 0; + frm_cfg.frame_pin_dir = regk_sser_in; gen_cfg.clk_dir = regk_sser_in; break; case MASTER_INPUT: port->output = 0; port->input = 1; + frm_cfg.frame_pin_dir = regk_sser_out; + frm_cfg.out_on = regk_sser_intern_tb; gen_cfg.clk_dir = regk_sser_out; break; case SLAVE_INPUT: port->output = 0; port->input = 1; + frm_cfg.frame_pin_dir = regk_sser_in; gen_cfg.clk_dir = regk_sser_in; break; case MASTER_BIDIR: port->output = 1; port->input = 1; + frm_cfg.frame_pin_dir = regk_sser_out; + frm_cfg.out_on = regk_sser_intern_tb; gen_cfg.clk_dir = regk_sser_out; break; case SLAVE_BIDIR: port->output = 1; port->input = 1; + frm_cfg.frame_pin_dir = regk_sser_in; gen_cfg.clk_dir = regk_sser_in; break; default: spin_unlock_irq(&port->lock); return -EINVAL; - } if (!port->use_dma || (arg == MASTER_OUTPUT || arg == SLAVE_OUTPUT)) intr_mask.rdav = regk_sser_yes; break; case SSP_FRAME_SYNC: - if (arg & NORMAL_SYNC) + if (arg & NORMAL_SYNC) { + frm_cfg.rec_delay = 1; frm_cfg.tr_delay = 1; + } else if (arg & EARLY_SYNC) - frm_cfg.tr_delay = 0; + frm_cfg.rec_delay = frm_cfg.tr_delay = 0; + else if (arg & SECOND_WORD_SYNC) { + frm_cfg.rec_delay = 7; + frm_cfg.tr_delay = 1; + } tr_cfg.bulk_wspace = frm_cfg.tr_delay; frm_cfg.early_wend = regk_sser_yes; @@ -680,9 +832,11 @@ static int sync_serial_ioctl(struct inode *inode, struct file *file, else if (arg & SYNC_OFF) frm_cfg.frame_pin_use = regk_sser_gio0; - if (arg & WORD_SIZE_8) + dma_w_size = regk_dma_set_w_size2; + if (arg & WORD_SIZE_8) { rec_cfg.sample_size = tr_cfg.sample_size = 7; - else if (arg & WORD_SIZE_12) + dma_w_size = regk_dma_set_w_size1; + } else if (arg & WORD_SIZE_12) rec_cfg.sample_size = tr_cfg.sample_size = 11; else if (arg & WORD_SIZE_16) rec_cfg.sample_size = tr_cfg.sample_size = 15; @@ -696,10 +850,13 @@ static int sync_serial_ioctl(struct inode *inode, struct file *file, else if (arg & BIT_ORDER_LSB) rec_cfg.sh_dir = tr_cfg.sh_dir = regk_sser_lsbfirst; - if (arg & FLOW_CONTROL_ENABLE) + if (arg & FLOW_CONTROL_ENABLE) { + frm_cfg.status_pin_use = regk_sser_frm; rec_cfg.fifo_thr = regk_sser_thr16; - else if (arg & FLOW_CONTROL_DISABLE) + } else if (arg & FLOW_CONTROL_DISABLE) { + frm_cfg.status_pin_use = regk_sser_gio0; rec_cfg.fifo_thr = regk_sser_inf; + } if (arg & CLOCK_NOT_GATED) gen_cfg.gate_clk = regk_sser_no; @@ -726,9 +883,9 @@ static int sync_serial_ioctl(struct inode *inode, struct file *file, break; case SSP_OPOLARITY: if (arg & CLOCK_NORMAL) - gen_cfg.out_clk_pol = regk_sser_neg; - else if (arg & CLOCK_INVERT) gen_cfg.out_clk_pol = regk_sser_pos; + else if (arg & CLOCK_INVERT) + gen_cfg.out_clk_pol = regk_sser_neg; if (arg & FRAME_NORMAL) frm_cfg.level = regk_sser_pos_hi; @@ -770,10 +927,9 @@ static int sync_serial_ioctl(struct inode *inode, struct file *file, } - if (port->started) - { - tr_cfg.tr_en = port->output; + if (port->started) { rec_cfg.rec_en = port->input; + gen_cfg.en = (port->output | port->input); } REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg); @@ -782,138 +938,145 @@ static int sync_serial_ioctl(struct inode *inode, struct file *file, REG_WR(sser, port->regi_sser, rw_intr_mask, intr_mask); REG_WR(sser, port->regi_sser, rw_cfg, gen_cfg); + + if (cmd == SSP_FRAME_SYNC && (arg & (WORD_SIZE_8 | WORD_SIZE_12 | + WORD_SIZE_16 | WORD_SIZE_24 | WORD_SIZE_32))) { + int en = gen_cfg.en; + gen_cfg.en = 0; + REG_WR(sser, port->regi_sser, rw_cfg, gen_cfg); + /* ##### Should DMA be stoped before we change dma size? */ + DMA_WR_CMD(port->regi_dmain, dma_w_size); + DMA_WR_CMD(port->regi_dmaout, dma_w_size); + gen_cfg.en = en; + REG_WR(sser, port->regi_sser, rw_cfg, gen_cfg); + } + spin_unlock_irq(&port->lock); return return_val; } -static ssize_t sync_serial_write(struct file * file, const char * buf, - size_t count, loff_t *ppos) +/* NOTE: sync_serial_write does not support concurrency */ +static ssize_t sync_serial_write(struct file *file, const char *buf, + size_t count, loff_t *ppos) { int dev = iminor(file->f_path.dentry->d_inode); DECLARE_WAITQUEUE(wait, current); - sync_port *port; - unsigned long c, c1; - unsigned long free_outp; - unsigned long outp; - unsigned long out_buffer; + struct sync_port *port; + int trunc_count; unsigned long flags; + int bytes_free; + int out_buf_count; - if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) - { + unsigned char *rd_ptr; /* First allocated byte in the buffer */ + unsigned char *wr_ptr; /* First free byte in the buffer */ + unsigned char *buf_stop_ptr; /* Last byte + 1 */ + + if (dev < 0 || dev >= NBR_PORTS || !ports[dev].enabled) { DEBUG(printk("Invalid minor %d\n", dev)); return -ENODEV; } port = &ports[dev]; - DEBUGWRITE(printk("W d%d c %lu (%d/%d)\n", port->port_nbr, count, port->out_count, OUT_BUFFER_SIZE)); - /* Space to end of buffer */ - /* - * out_buffer <c1>012345<- c ->OUT_BUFFER_SIZE - * outp^ +out_count - ^free_outp - * out_buffer 45<- c ->0123OUT_BUFFER_SIZE - * +out_count outp^ - * free_outp - * + /* |<- OUT_BUFFER_SIZE ->| + * |<- out_buf_count ->| + * |<- trunc_count ->| ...->| + * ______________________________________________________ + * | free | data | free | + * |_________|___________________|________________________| + * ^ rd_ptr ^ wr_ptr */ + DEBUGWRITE(printk(KERN_DEBUG "W d%d c %lu a: %p c: %p\n", + port->port_nbr, count, port->active_tr_descr, + port->catch_tr_descr)); /* Read variables that may be updated by interrupts */ spin_lock_irqsave(&port->lock, flags); - count = count > OUT_BUFFER_SIZE - port->out_count ? OUT_BUFFER_SIZE - port->out_count : count; - outp = (unsigned long)port->outp; - free_outp = outp + port->out_count; + rd_ptr = port->out_rd_ptr; + out_buf_count = port->out_buf_count; spin_unlock_irqrestore(&port->lock, flags); - out_buffer = (unsigned long)port->out_buffer; - /* Find out where and how much to write */ - if (free_outp >= out_buffer + OUT_BUFFER_SIZE) - free_outp -= OUT_BUFFER_SIZE; - if (free_outp >= outp) - c = out_buffer + OUT_BUFFER_SIZE - free_outp; - else - c = outp - free_outp; - if (c > count) - c = count; + /* Check if resources are available */ + if (port->tr_running && + ((port->use_dma && port->active_tr_descr == port->catch_tr_descr) || + out_buf_count >= OUT_BUFFER_SIZE)) { + DEBUGWRITE(printk(KERN_DEBUG "sser%d full\n", dev)); + return -EAGAIN; + } + + buf_stop_ptr = port->out_buffer + OUT_BUFFER_SIZE; + + /* Determine pointer to the first free byte, before copying. */ + wr_ptr = rd_ptr + out_buf_count; + if (wr_ptr >= buf_stop_ptr) + wr_ptr -= OUT_BUFFER_SIZE; -// DEBUGWRITE(printk("w op %08lX fop %08lX c %lu\n", outp, free_outp, c)); - if (copy_from_user((void*)free_outp, buf, c)) + /* If we wrap the ring buffer, let the user space program handle it by + * truncating the data. This could be more elegant, small buffer + * fragments may occur. + */ + bytes_free = OUT_BUFFER_SIZE - out_buf_count; + if (wr_ptr + bytes_free > buf_stop_ptr) + bytes_free = buf_stop_ptr - wr_ptr; + trunc_count = (count < bytes_free) ? count : bytes_free; + + if (copy_from_user(wr_ptr, buf, trunc_count)) return -EFAULT; - if (c != count) { - buf += c; - c1 = count - c; - DEBUGWRITE(printk("w2 fi %lu c %lu c1 %lu\n", free_outp-out_buffer, c, c1)); - if (copy_from_user((void*)out_buffer, buf, c1)) - return -EFAULT; - } - spin_lock_irqsave(&port->lock, flags); - port->out_count += count; - spin_unlock_irqrestore(&port->lock, flags); + DEBUGOUTBUF(printk(KERN_DEBUG "%-4d + %-4d = %-4d %p %p %p\n", + out_buf_count, trunc_count, + port->out_buf_count, port->out_buffer, + wr_ptr, buf_stop_ptr)); /* Make sure transmitter/receiver is running */ - if (!port->started) - { + if (!port->started) { reg_sser_rw_cfg cfg = REG_RD(sser, port->regi_sser, rw_cfg); - reg_sser_rw_tr_cfg tr_cfg = REG_RD(sser, port->regi_sser, rw_tr_cfg); reg_sser_rw_rec_cfg rec_cfg = REG_RD(sser, port->regi_sser, rw_rec_cfg); cfg.en = regk_sser_yes; - tr_cfg.tr_en = port->output; rec_cfg.rec_en = port->input; REG_WR(sser, port->regi_sser, rw_cfg, cfg); - REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg); REG_WR(sser, port->regi_sser, rw_rec_cfg, rec_cfg); port->started = 1; } - if (file->f_flags & O_NONBLOCK) { - spin_lock_irqsave(&port->lock, flags); - if (!port->tr_running) { - if (!port->use_dma) { - reg_sser_rw_intr_mask intr_mask; - intr_mask = REG_RD(sser, port->regi_sser, rw_intr_mask); - /* Start sender by writing data */ - send_word(port); - /* and enable transmitter ready IRQ */ - intr_mask.trdy = 1; - REG_WR(sser, port->regi_sser, rw_intr_mask, intr_mask); - } else { - start_dma(port, (unsigned char* volatile )port->outp, c); - } - } - spin_unlock_irqrestore(&port->lock, flags); - DEBUGWRITE(printk("w d%d c %lu NB\n", - port->port_nbr, count)); - return count; + /* Setup wait if blocking */ + if (!(file->f_flags & O_NONBLOCK)) { + add_wait_queue(&port->out_wait_q, &wait); + set_current_state(TASK_INTERRUPTIBLE); } - /* Sleep until all sent */ - - add_wait_queue(&port->out_wait_q, &wait); - set_current_state(TASK_INTERRUPTIBLE); spin_lock_irqsave(&port->lock, flags); - if (!port->tr_running) { - if (!port->use_dma) { - reg_sser_rw_intr_mask intr_mask; - intr_mask = REG_RD(sser, port->regi_sser, rw_intr_mask); - /* Start sender by writing data */ - send_word(port); - /* and enable transmitter ready IRQ */ - intr_mask.trdy = 1; - REG_WR(sser, port->regi_sser, rw_intr_mask, intr_mask); - } else { - start_dma(port, port->outp, c); - } + port->out_buf_count += trunc_count; + if (port->use_dma) { + start_dma_out(port, wr_ptr, trunc_count); + } else if (!port->tr_running) { + reg_sser_rw_intr_mask intr_mask; + intr_mask = REG_RD(sser, port->regi_sser, rw_intr_mask); + /* Start sender by writing data */ + send_word(port); + /* and enable transmitter ready IRQ */ + intr_mask.trdy = 1; + REG_WR(sser, port->regi_sser, rw_intr_mask, intr_mask); } spin_unlock_irqrestore(&port->lock, flags); + + /* Exit if non blocking */ + if (file->f_flags & O_NONBLOCK) { + DEBUGWRITE(printk(KERN_DEBUG "w d%d c %lu %08x\n", + port->port_nbr, trunc_count, + REG_RD_INT(dma, port->regi_dmaout, r_intr))); + return trunc_count; + } + schedule(); set_current_state(TASK_RUNNING); remove_wait_queue(&port->out_wait_q, &wait); + if (signal_pending(current)) - { return -EINTR; - } - DEBUGWRITE(printk("w d%d c %lu\n", port->port_nbr, count)); - return count; + + DEBUGWRITE(printk(KERN_DEBUG "w d%d c %lu\n", + port->port_nbr, trunc_count)); + return trunc_count; } static ssize_t sync_serial_read(struct file * file, char * buf, @@ -926,7 +1089,7 @@ static ssize_t sync_serial_read(struct file * file, char * buf, unsigned char* end; unsigned long flags; - if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) + if (dev < 0 || dev >= NBR_PORTS || !ports[dev].enabled) { DEBUG(printk("Invalid minor %d\n", dev)); return -ENODEV; @@ -949,7 +1112,6 @@ static ssize_t sync_serial_read(struct file * file, char * buf, port->started = 1; } - /* Calculate number of available bytes */ /* Save pointers to avoid that they are modified by interrupt */ spin_lock_irqsave(&port->lock, flags); @@ -958,16 +1120,14 @@ static ssize_t sync_serial_read(struct file * file, char * buf, spin_unlock_irqrestore(&port->lock, flags); while ((start == end) && !port->full) /* No data */ { + DEBUGREAD(printk(KERN_DEBUG "&")); if (file->f_flags & O_NONBLOCK) - { return -EAGAIN; - } interruptible_sleep_on(&port->in_wait_q); if (signal_pending(current)) - { return -EINTR; - } + spin_lock_irqsave(&port->lock, flags); start = (unsigned char*)port->readp; /* cast away volatile */ end = (unsigned char*)port->writep; /* cast away volatile */ @@ -1004,83 +1164,105 @@ static void send_word(sync_port* port) switch(tr_cfg.sample_size) { case 8: - port->out_count--; - tr_data.data = *port->outp++; + port->out_buf_count--; + tr_data.data = *port->out_rd_ptr++; REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); - if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) - port->outp = port->out_buffer; + if (port->out_rd_ptr >= port->out_buffer + OUT_BUFFER_SIZE) + port->out_rd_ptr = port->out_buffer; break; case 12: { - int data = (*port->outp++) << 8; - data |= *port->outp++; - port->out_count-=2; + int data = (*port->out_rd_ptr++) << 8; + data |= *port->out_rd_ptr++; + port->out_buf_count -= 2; tr_data.data = data; REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); - if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) - port->outp = port->out_buffer; + if (port->out_rd_ptr >= port->out_buffer + OUT_BUFFER_SIZE) + port->out_rd_ptr = port->out_buffer; } break; case 16: - port->out_count-=2; - tr_data.data = *(unsigned short *)port->outp; + port->out_buf_count -= 2; + tr_data.data = *(unsigned short *)port->out_rd_ptr; REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); - port->outp+=2; - if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) - port->outp = port->out_buffer; + port->out_rd_ptr += 2; + if (port->out_rd_ptr >= port->out_buffer + OUT_BUFFER_SIZE) + port->out_rd_ptr = port->out_buffer; break; case 24: - port->out_count-=3; - tr_data.data = *(unsigned short *)port->outp; + port->out_buf_count -= 3; + tr_data.data = *(unsigned short *)port->out_rd_ptr; REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); - port->outp+=2; - tr_data.data = *port->outp++; + port->out_rd_ptr += 2; + tr_data.data = *port->out_rd_ptr++; REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); - if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) - port->outp = port->out_buffer; + if (port->out_rd_ptr >= port->out_buffer + OUT_BUFFER_SIZE) + port->out_rd_ptr = port->out_buffer; break; case 32: - port->out_count-=4; - tr_data.data = *(unsigned short *)port->outp; + port->out_buf_count -= 4; + tr_data.data = *(unsigned short *)port->out_rd_ptr; REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); - port->outp+=2; - tr_data.data = *(unsigned short *)port->outp; + port->out_rd_ptr += 2; + tr_data.data = *(unsigned short *)port->out_rd_ptr; REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); - port->outp+=2; - if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) - port->outp = port->out_buffer; + port->out_rd_ptr += 2; + if (port->out_rd_ptr >= port->out_buffer + OUT_BUFFER_SIZE) + port->out_rd_ptr = port->out_buffer; break; } } - -static void start_dma(struct sync_port* port, const char* data, int count) +static void start_dma_out(struct sync_port *port, + const char *data, int count) { - port->tr_running = 1; - port->out_descr.buf = (char*)virt_to_phys((char*)data); - port->out_descr.after = port->out_descr.buf + count; - port->out_descr.eol = port->out_descr.intr = 1; + port->active_tr_descr->buf = (char *) virt_to_phys((char *) data); + port->active_tr_descr->after = port->active_tr_descr->buf + count; + port->active_tr_descr->intr = 1; + + port->active_tr_descr->eol = 1; + port->prev_tr_descr->eol = 0; + + DEBUGTRDMA(printk(KERN_DEBUG "Inserting eolr:%p eol@:%p\n", + port->prev_tr_descr, port->active_tr_descr)); + port->prev_tr_descr = port->active_tr_descr; + port->active_tr_descr = phys_to_virt((int) port->active_tr_descr->next); + + if (!port->tr_running) { + reg_sser_rw_tr_cfg tr_cfg = REG_RD(sser, port->regi_sser, + rw_tr_cfg); - port->out_context.saved_data = (dma_descr_data*)virt_to_phys(&port->out_descr); - port->out_context.saved_data_buf = port->out_descr.buf; + port->out_context.next = 0; + port->out_context.saved_data = + (dma_descr_data *)virt_to_phys(port->prev_tr_descr); + port->out_context.saved_data_buf = port->prev_tr_descr->buf; + + DMA_START_CONTEXT(port->regi_dmaout, + virt_to_phys((char *)&port->out_context)); + + tr_cfg.tr_en = regk_sser_yes; + REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg); + DEBUGTRDMA(printk(KERN_DEBUG "dma s\n");); + } else { + DMA_CONTINUE_DATA(port->regi_dmaout); + DEBUGTRDMA(printk(KERN_DEBUG "dma c\n");); + } - DMA_START_CONTEXT(port->regi_dmaout, virt_to_phys((char*)&port->out_context)); - DEBUGTXINT(printk("dma %08lX c %d\n", (unsigned long)data, count)); + port->tr_running = 1; } -static void start_dma_in(sync_port* port) +static void start_dma_in(sync_port *port) { int i; - char* buf; + char *buf; port->writep = port->flip; - if (port->writep > port->flip + port->in_buffer_size) - { + if (port->writep > port->flip + port->in_buffer_size) { panic("Offset too large in sync serial driver\n"); return; } buf = (char*)virt_to_phys(port->in_buffer); - for (i = 0; i < NUM_IN_DESCR; i++) { + for (i = 0; i < NBR_IN_DESCR; i++) { port->in_descr[i].buf = buf; port->in_descr[i].after = buf + port->inbufchunk; port->in_descr[i].intr = 1; @@ -1092,59 +1274,126 @@ static void start_dma_in(sync_port* port) port->in_descr[i-1].next = (dma_descr_data*)virt_to_phys(&port->in_descr[0]); port->in_descr[i-1].eol = regk_sser_yes; port->next_rx_desc = &port->in_descr[0]; - port->prev_rx_desc = &port->in_descr[NUM_IN_DESCR - 1]; + port->prev_rx_desc = &port->in_descr[NBR_IN_DESCR - 1]; port->in_context.saved_data = (dma_descr_data*)virt_to_phys(&port->in_descr[0]); port->in_context.saved_data_buf = port->in_descr[0].buf; DMA_START_CONTEXT(port->regi_dmain, virt_to_phys(&port->in_context)); } #ifdef SYNC_SER_DMA -static irqreturn_t tr_interrupt(int irq, void *dev_id, struct pt_regs * regs) +static irqreturn_t tr_interrupt(int irq, void *dev_id) { reg_dma_r_masked_intr masked; reg_dma_rw_ack_intr ack_intr = {.data = regk_dma_yes}; + reg_dma_rw_stat stat; int i; - struct dma_descr_data *descr; - unsigned int sentl; int found = 0; + int stop_sser = 0; - for (i = 0; i < NUMBER_OF_PORTS; i++) - { + for (i = 0; i < NBR_PORTS; i++) { sync_port *port = &ports[i]; - if (!port->enabled || !port->use_dma ) + if (!port->enabled || !port->use_dma) continue; + /* IRQ active for the port? */ masked = REG_RD(dma, port->regi_dmaout, r_masked_intr); + if (!masked.data) + continue; - if (masked.data) /* IRQ active for the port? */ - { - found = 1; - /* Clear IRQ */ - REG_WR(dma, port->regi_dmaout, rw_ack_intr, ack_intr); - descr = &port->out_descr; - sentl = descr->after - descr->buf; - port->out_count -= sentl; - port->outp += sentl; - if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) - port->outp = port->out_buffer; - if (port->out_count) { - int c; - c = port->out_buffer + OUT_BUFFER_SIZE - port->outp; - if (c > port->out_count) - c = port->out_count; - DEBUGTXINT(printk("tx_int DMAWRITE %i %i\n", sentl, c)); - start_dma(port, port->outp, c); - } else { - DEBUGTXINT(printk("tx_int DMA stop %i\n", sentl)); - port->tr_running = 0; + found = 1; + + /* Check if we should stop the DMA transfer */ + stat = REG_RD(dma, port->regi_dmaout, rw_stat); + if (stat.list_state == regk_dma_data_at_eol) + stop_sser = 1; + + /* Clear IRQ */ + REG_WR(dma, port->regi_dmaout, rw_ack_intr, ack_intr); + + if (!stop_sser) { + /* The DMA has completed a descriptor, EOL was not + * encountered, so step relevant descriptor and + * datapointers forward. */ + int sent; + sent = port->catch_tr_descr->after - + port->catch_tr_descr->buf; + DEBUGTXINT(printk(KERN_DEBUG "%-4d - %-4d = %-4d\t" + "in descr %p (ac: %p)\n", + port->out_buf_count, sent, + port->out_buf_count - sent, + port->catch_tr_descr, + port->active_tr_descr);); + port->out_buf_count -= sent; + port->catch_tr_descr = + phys_to_virt((int) port->catch_tr_descr->next); + port->out_rd_ptr = + phys_to_virt((int) port->catch_tr_descr->buf); + } else { + int i, sent; + /* EOL handler. + * Note that if an EOL was encountered during the irq + * locked section of sync_ser_write the DMA will be + * restarted and the eol flag will be cleared. + * The remaining descriptors will be traversed by + * the descriptor interrupts as usual. + */ + i = 0; + while (!port->catch_tr_descr->eol) { + sent = port->catch_tr_descr->after - + port->catch_tr_descr->buf; + DEBUGOUTBUF(printk(KERN_DEBUG + "traversing descr %p -%d (%d)\n", + port->catch_tr_descr, + sent, + port->out_buf_count)); + port->out_buf_count -= sent; + port->catch_tr_descr = phys_to_virt( + (int)port->catch_tr_descr->next); + i++; + if (i >= NBR_OUT_DESCR) { + /* TODO: Reset and recover */ + panic("sync_serial: missing eol"); + } } - wake_up_interruptible(&port->out_wait_q); /* wake up the waiting process */ + sent = port->catch_tr_descr->after - + port->catch_tr_descr->buf; + DEBUGOUTBUF(printk(KERN_DEBUG + "eol at descr %p -%d (%d)\n", + port->catch_tr_descr, + sent, + port->out_buf_count)); + + port->out_buf_count -= sent; + + /* Update read pointer to first free byte, we + * may already be writing data there. */ + port->out_rd_ptr = + phys_to_virt((int) port->catch_tr_descr->after); + if (port->out_rd_ptr > port->out_buffer + + OUT_BUFFER_SIZE) + port->out_rd_ptr = port->out_buffer; + + reg_sser_rw_tr_cfg tr_cfg = + REG_RD(sser, port->regi_sser, rw_tr_cfg); + DEBUGTXINT(printk(KERN_DEBUG + "tr_int DMA stop %d, set catch @ %p\n", + port->out_buf_count, + port->active_tr_descr)); + if (port->out_buf_count != 0) + printk(KERN_CRIT "sync_ser: buffer not " + "empty after eol.\n"); + port->catch_tr_descr = port->active_tr_descr; + port->tr_running = 0; + tr_cfg.tr_en = regk_sser_no; + REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg); } + /* wake up the waiting process */ + wake_up_interruptible(&port->out_wait_q); } return IRQ_RETVAL(found); } /* tr_interrupt */ -static irqreturn_t rx_interrupt(int irq, void *dev_id, struct pt_regs * regs) +static irqreturn_t rx_interrupt(int irq, void *dev_id) { reg_dma_r_masked_intr masked; reg_dma_rw_ack_intr ack_intr = {.data = regk_dma_yes}; @@ -1152,7 +1401,7 @@ static irqreturn_t rx_interrupt(int irq, void *dev_id, struct pt_regs * regs) int i; int found = 0; - for (i = 0; i < NUMBER_OF_PORTS; i++) + for (i = 0; i < NBR_PORTS; i++) { sync_port *port = &ports[i]; @@ -1166,7 +1415,7 @@ static irqreturn_t rx_interrupt(int irq, void *dev_id, struct pt_regs * regs) found = 1; while (REG_RD(dma, port->regi_dmain, rw_data) != virt_to_phys(port->next_rx_desc)) { - + DEBUGRXINT(printk(KERN_DEBUG "!")); if (port->writep + port->inbufchunk > port->flip + port->in_buffer_size) { int first_size = port->flip + port->in_buffer_size - port->writep; memcpy((char*)port->writep, phys_to_virt((unsigned)port->next_rx_desc->buf), first_size); @@ -1185,11 +1434,16 @@ static irqreturn_t rx_interrupt(int irq, void *dev_id, struct pt_regs * regs) port->full = 1; } - port->next_rx_desc->eol = 0; - port->prev_rx_desc->eol = 1; - port->prev_rx_desc = phys_to_virt((unsigned)port->next_rx_desc); + port->next_rx_desc->eol = 1; + port->prev_rx_desc->eol = 0; + /* Cache bug workaround */ + flush_dma_descr(port->prev_rx_desc, 0); + port->prev_rx_desc = port->next_rx_desc; port->next_rx_desc = phys_to_virt((unsigned)port->next_rx_desc->next); - wake_up_interruptible(&port->in_wait_q); /* wake up the waiting process */ + /* Cache bug workaround */ + flush_dma_descr(port->prev_rx_desc, 1); + /* wake up the waiting process */ + wake_up_interruptible(&port->in_wait_q); DMA_CONTINUE(port->regi_dmain); REG_WR(dma, port->regi_dmain, rw_ack_intr, ack_intr); @@ -1201,15 +1455,15 @@ static irqreturn_t rx_interrupt(int irq, void *dev_id, struct pt_regs * regs) #endif /* SYNC_SER_DMA */ #ifdef SYNC_SER_MANUAL -static irqreturn_t manual_interrupt(int irq, void *dev_id, struct pt_regs * regs) +static irqreturn_t manual_interrupt(int irq, void *dev_id) { int i; int found = 0; reg_sser_r_masked_intr masked; - for (i = 0; i < NUMBER_OF_PORTS; i++) + for (i = 0; i < NBR_PORTS; i++) { - sync_port* port = &ports[i]; + sync_port *port = &ports[i]; if (!port->enabled || port->use_dma) { @@ -1263,7 +1517,7 @@ static irqreturn_t manual_interrupt(int irq, void *dev_id, struct pt_regs * regs if (masked.trdy) /* Transmitter ready? */ { found = 1; - if (port->out_count > 0) /* More data to send */ + if (port->out_buf_count > 0) /* More data to send */ send_word(port); else /* transmission finished */ { diff --git a/arch/cris/arch-v32/kernel/Makefile b/arch/cris/arch-v32/kernel/Makefile index 5d5b613cde8c..993d987b0078 100644 --- a/arch/cris/arch-v32/kernel/Makefile +++ b/arch/cris/arch-v32/kernel/Makefile @@ -1,4 +1,3 @@ -# $Id: Makefile,v 1.11 2004/12/17 10:16:13 starvik Exp $ # # Makefile for the linux kernel. # @@ -6,9 +5,9 @@ extra-y := head.o -obj-y := entry.o traps.o irq.o debugport.o dma.o pinmux.o \ +obj-y := entry.o traps.o irq.o debugport.o \ process.o ptrace.o setup.o signal.o traps.o time.o \ - arbiter.o io.o + cache.o cacheflush.o obj-$(CONFIG_ETRAXFS_SIM) += vcs_hook.o diff --git a/arch/cris/arch-v32/kernel/arbiter.c b/arch/cris/arch-v32/kernel/arbiter.c deleted file mode 100644 index 420a5312ed03..000000000000 --- a/arch/cris/arch-v32/kernel/arbiter.c +++ /dev/null @@ -1,296 +0,0 @@ -/* - * Memory arbiter functions. Allocates bandwidth through the - * arbiter and sets up arbiter breakpoints. - * - * The algorithm first assigns slots to the clients that has specified - * bandwidth (e.g. ethernet) and then the remaining slots are divided - * on all the active clients. - * - * Copyright (c) 2004, 2005 Axis Communications AB. - */ - -#include <asm/arch/hwregs/reg_map.h> -#include <asm/arch/hwregs/reg_rdwr.h> -#include <asm/arch/hwregs/marb_defs.h> -#include <asm/arch/arbiter.h> -#include <asm/arch/hwregs/intr_vect.h> -#include <linux/interrupt.h> -#include <linux/signal.h> -#include <linux/errno.h> -#include <linux/spinlock.h> -#include <asm/io.h> - -struct crisv32_watch_entry -{ - unsigned long instance; - watch_callback* cb; - unsigned long start; - unsigned long end; - int used; -}; - -#define NUMBER_OF_BP 4 -#define NBR_OF_CLIENTS 14 -#define NBR_OF_SLOTS 64 -#define SDRAM_BANDWIDTH 100000000 /* Some kind of expected value */ -#define INTMEM_BANDWIDTH 400000000 -#define NBR_OF_REGIONS 2 - -static struct crisv32_watch_entry watches[NUMBER_OF_BP] = -{ - {regi_marb_bp0}, - {regi_marb_bp1}, - {regi_marb_bp2}, - {regi_marb_bp3} -}; - -static int requested_slots[NBR_OF_REGIONS][NBR_OF_CLIENTS]; -static int active_clients[NBR_OF_REGIONS][NBR_OF_CLIENTS]; -static int max_bandwidth[NBR_OF_REGIONS] = {SDRAM_BANDWIDTH, INTMEM_BANDWIDTH}; - -DEFINE_SPINLOCK(arbiter_lock); - -static irqreturn_t -crisv32_arbiter_irq(int irq, void* dev_id, struct pt_regs* regs); - -static void crisv32_arbiter_config(int region) -{ - int slot; - int client; - int interval = 0; - int val[NBR_OF_SLOTS]; - - for (slot = 0; slot < NBR_OF_SLOTS; slot++) - val[slot] = NBR_OF_CLIENTS + 1; - - for (client = 0; client < NBR_OF_CLIENTS; client++) - { - int pos; - if (!requested_slots[region][client]) - continue; - interval = NBR_OF_SLOTS / requested_slots[region][client]; - pos = 0; - while (pos < NBR_OF_SLOTS) - { - if (val[pos] != NBR_OF_CLIENTS + 1) - pos++; - else - { - val[pos] = client; - pos += interval; - } - } - } - - client = 0; - for (slot = 0; slot < NBR_OF_SLOTS; slot++) - { - if (val[slot] == NBR_OF_CLIENTS + 1) - { - int first = client; - while(!active_clients[region][client]) { - client = (client + 1) % NBR_OF_CLIENTS; - if (client == first) - break; - } - val[slot] = client; - client = (client + 1) % NBR_OF_CLIENTS; - } - if (region == EXT_REGION) - REG_WR_INT_VECT(marb, regi_marb, rw_ext_slots, slot, val[slot]); - else if (region == INT_REGION) - REG_WR_INT_VECT(marb, regi_marb, rw_int_slots, slot, val[slot]); - } -} - -extern char _stext, _etext; - -static void crisv32_arbiter_init(void) -{ - static int initialized = 0; - - if (initialized) - return; - - initialized = 1; - - /* CPU caches are active. */ - active_clients[EXT_REGION][10] = active_clients[EXT_REGION][11] = 1; - crisv32_arbiter_config(EXT_REGION); - crisv32_arbiter_config(INT_REGION); - - if (request_irq(MEMARB_INTR_VECT, crisv32_arbiter_irq, IRQF_DISABLED, - "arbiter", NULL)) - printk(KERN_ERR "Couldn't allocate arbiter IRQ\n"); - -#ifndef CONFIG_ETRAX_KGDB - /* Global watch for writes to kernel text segment. */ - crisv32_arbiter_watch(virt_to_phys(&_stext), &_etext - &_stext, - arbiter_all_clients, arbiter_all_write, NULL); -#endif -} - - - -int crisv32_arbiter_allocate_bandwidth(int client, int region, - unsigned long bandwidth) -{ - int i; - int total_assigned = 0; - int total_clients = 0; - int req; - - crisv32_arbiter_init(); - - for (i = 0; i < NBR_OF_CLIENTS; i++) - { - total_assigned += requested_slots[region][i]; - total_clients += active_clients[region][i]; - } - req = NBR_OF_SLOTS / (max_bandwidth[region] / bandwidth); - - if (total_assigned + total_clients + req + 1 > NBR_OF_SLOTS) - return -ENOMEM; - - active_clients[region][client] = 1; - requested_slots[region][client] = req; - crisv32_arbiter_config(region); - - return 0; -} - -int crisv32_arbiter_watch(unsigned long start, unsigned long size, - unsigned long clients, unsigned long accesses, - watch_callback* cb) -{ - int i; - - crisv32_arbiter_init(); - - if (start > 0x80000000) { - printk("Arbiter: %lX doesn't look like a physical address", start); - return -EFAULT; - } - - spin_lock(&arbiter_lock); - - for (i = 0; i < NUMBER_OF_BP; i++) { - if (!watches[i].used) { - reg_marb_rw_intr_mask intr_mask = REG_RD(marb, regi_marb, rw_intr_mask); - - watches[i].used = 1; - watches[i].start = start; - watches[i].end = start + size; - watches[i].cb = cb; - - REG_WR_INT(marb_bp, watches[i].instance, rw_first_addr, watches[i].start); - REG_WR_INT(marb_bp, watches[i].instance, rw_last_addr, watches[i].end); - REG_WR_INT(marb_bp, watches[i].instance, rw_op, accesses); - REG_WR_INT(marb_bp, watches[i].instance, rw_clients, clients); - - if (i == 0) - intr_mask.bp0 = regk_marb_yes; - else if (i == 1) - intr_mask.bp1 = regk_marb_yes; - else if (i == 2) - intr_mask.bp2 = regk_marb_yes; - else if (i == 3) - intr_mask.bp3 = regk_marb_yes; - - REG_WR(marb, regi_marb, rw_intr_mask, intr_mask); - spin_unlock(&arbiter_lock); - - return i; - } - } - spin_unlock(&arbiter_lock); - return -ENOMEM; -} - -int crisv32_arbiter_unwatch(int id) -{ - reg_marb_rw_intr_mask intr_mask = REG_RD(marb, regi_marb, rw_intr_mask); - - crisv32_arbiter_init(); - - spin_lock(&arbiter_lock); - - if ((id < 0) || (id >= NUMBER_OF_BP) || (!watches[id].used)) { - spin_unlock(&arbiter_lock); - return -EINVAL; - } - - memset(&watches[id], 0, sizeof(struct crisv32_watch_entry)); - - if (id == 0) - intr_mask.bp0 = regk_marb_no; - else if (id == 1) - intr_mask.bp2 = regk_marb_no; - else if (id == 2) - intr_mask.bp2 = regk_marb_no; - else if (id == 3) - intr_mask.bp3 = regk_marb_no; - - REG_WR(marb, regi_marb, rw_intr_mask, intr_mask); - - spin_unlock(&arbiter_lock); - return 0; -} - -extern void show_registers(struct pt_regs *regs); - -static irqreturn_t -crisv32_arbiter_irq(int irq, void* dev_id, struct pt_regs* regs) -{ - reg_marb_r_masked_intr masked_intr = REG_RD(marb, regi_marb, r_masked_intr); - reg_marb_bp_r_brk_clients r_clients; - reg_marb_bp_r_brk_addr r_addr; - reg_marb_bp_r_brk_op r_op; - reg_marb_bp_r_brk_first_client r_first; - reg_marb_bp_r_brk_size r_size; - reg_marb_bp_rw_ack ack = {0}; - reg_marb_rw_ack_intr ack_intr = {.bp0=1,.bp1=1,.bp2=1,.bp3=1}; - struct crisv32_watch_entry* watch; - - if (masked_intr.bp0) { - watch = &watches[0]; - ack_intr.bp0 = regk_marb_yes; - } else if (masked_intr.bp1) { - watch = &watches[1]; - ack_intr.bp1 = regk_marb_yes; - } else if (masked_intr.bp2) { - watch = &watches[2]; - ack_intr.bp2 = regk_marb_yes; - } else if (masked_intr.bp3) { - watch = &watches[3]; - ack_intr.bp3 = regk_marb_yes; - } else { - return IRQ_NONE; - } - - /* Retrieve all useful information and print it. */ - r_clients = REG_RD(marb_bp, watch->instance, r_brk_clients); - r_addr = REG_RD(marb_bp, watch->instance, r_brk_addr); - r_op = REG_RD(marb_bp, watch->instance, r_brk_op); - r_first = REG_RD(marb_bp, watch->instance, r_brk_first_client); - r_size = REG_RD(marb_bp, watch->instance, r_brk_size); - - printk("Arbiter IRQ\n"); - printk("Clients %X addr %X op %X first %X size %X\n", - REG_TYPE_CONV(int, reg_marb_bp_r_brk_clients, r_clients), - REG_TYPE_CONV(int, reg_marb_bp_r_brk_addr, r_addr), - REG_TYPE_CONV(int, reg_marb_bp_r_brk_op, r_op), - REG_TYPE_CONV(int, reg_marb_bp_r_brk_first_client, r_first), - REG_TYPE_CONV(int, reg_marb_bp_r_brk_size, r_size)); - - REG_WR(marb_bp, watch->instance, rw_ack, ack); - REG_WR(marb, regi_marb, rw_ack_intr, ack_intr); - - printk("IRQ occured at %lX\n", regs->erp); - - if (watch->cb) - watch->cb(); - - - return IRQ_HANDLED; -} diff --git a/arch/cris/arch-v32/kernel/crisksyms.c b/arch/cris/arch-v32/kernel/crisksyms.c index e513da711245..77d02c15a7fc 100644 --- a/arch/cris/arch-v32/kernel/crisksyms.c +++ b/arch/cris/arch-v32/kernel/crisksyms.c @@ -2,7 +2,8 @@ #include <linux/irq.h> #include <asm/arch/dma.h> #include <asm/arch/intmem.h> -#include <asm/arch/pinmux.h> +#include <asm/arch/mach/pinmux.h> +#include <asm/arch/io.h> /* Functions for allocating DMA channels */ EXPORT_SYMBOL(crisv32_request_dma); @@ -16,7 +17,11 @@ EXPORT_SYMBOL(crisv32_intmem_virt_to_phys); /* Functions for handling pinmux */ EXPORT_SYMBOL(crisv32_pinmux_alloc); +EXPORT_SYMBOL(crisv32_pinmux_alloc_fixed); EXPORT_SYMBOL(crisv32_pinmux_dealloc); +EXPORT_SYMBOL(crisv32_pinmux_dealloc_fixed); +EXPORT_SYMBOL(crisv32_io_get_name); +EXPORT_SYMBOL(crisv32_io_get); /* Functions masking/unmasking interrupts */ EXPORT_SYMBOL(mask_irq); diff --git a/arch/cris/arch-v32/kernel/debugport.c b/arch/cris/arch-v32/kernel/debugport.c index d1272ad92153..15af4c293157 100644 --- a/arch/cris/arch-v32/kernel/debugport.c +++ b/arch/cris/arch-v32/kernel/debugport.c @@ -4,17 +4,12 @@ #include <linux/console.h> #include <linux/init.h> -#include <linux/major.h> -#include <linux/delay.h> -#include <linux/tty.h> #include <asm/system.h> -#include <asm/io.h> -#include <asm/arch/hwregs/ser_defs.h> -#include <asm/arch/hwregs/dma_defs.h> -#include <asm/arch/pinmux.h> - -#include <asm/irq.h> -#include <asm/arch/hwregs/intr_vect_defs.h> +#include <hwregs/reg_rdwr.h> +#include <hwregs/reg_map.h> +#include <hwregs/ser_defs.h> +#include <hwregs/dma_defs.h> +#include <asm/arch/mach/pinmux.h> struct dbg_port { @@ -59,45 +54,50 @@ struct dbg_port ports[] = 115200, 'N', 8 - } + }, +#if CONFIG_ETRAX_SERIAL_PORTS == 5 + { + 4, + regi_ser4, + 0, + 115200, + 'N', + 8 + }, +#endif }; static struct dbg_port *port = #if defined(CONFIG_ETRAX_DEBUG_PORT0) -&ports[0]; + &ports[0]; #elif defined(CONFIG_ETRAX_DEBUG_PORT1) -&ports[1]; + &ports[1]; #elif defined(CONFIG_ETRAX_DEBUG_PORT2) -&ports[2]; + &ports[2]; #elif defined(CONFIG_ETRAX_DEBUG_PORT3) -&ports[3]; + &ports[3]; +#elif defined(CONFIG_ETRAX_DEBUG_PORT4) + &ports[4]; #else -NULL; + NULL; #endif #ifdef CONFIG_ETRAX_KGDB static struct dbg_port *kgdb_port = #if defined(CONFIG_ETRAX_KGDB_PORT0) -&ports[0]; + &ports[0]; #elif defined(CONFIG_ETRAX_KGDB_PORT1) -&ports[1]; + &ports[1]; #elif defined(CONFIG_ETRAX_KGDB_PORT2) -&ports[2]; + &ports[2]; #elif defined(CONFIG_ETRAX_KGDB_PORT3) -&ports[3]; + &ports[3]; +#elif defined(CONFIG_ETRAX_KGDB_PORT4) + &ports[4]; #else -NULL; + NULL; #endif #endif -#ifdef CONFIG_ETRAXFS_SIM -extern void print_str( const char *str ); -static char buffer[1024]; -static char msg[] = "Debug: "; -static int buffer_pos = sizeof(msg) - 1; -#endif - -extern struct tty_driver *serial_driver; - static void start_port(struct dbg_port* p) { @@ -114,6 +114,10 @@ start_port(struct dbg_port* p) crisv32_pinmux_alloc_fixed(pinmux_ser2); else if (p->nbr == 3) crisv32_pinmux_alloc_fixed(pinmux_ser3); +#if CONFIG_ETRAX_SERIAL_PORTS == 5 + else if (p->nbr == 4) + crisv32_pinmux_alloc_fixed(pinmux_ser4); +#endif /* Set up serial port registers */ reg_ser_rw_tr_ctrl tr_ctrl = {0}; @@ -156,124 +160,21 @@ start_port(struct dbg_port* p) REG_WR (ser, p->instance, rw_rec_ctrl, rec_ctrl); } -/* No debug */ -#ifdef CONFIG_ETRAX_DEBUG_PORT_NULL - -static void -console_write(struct console *co, const char *buf, unsigned int len) -{ - return; -} - -/* Target debug */ -#elif !defined(CONFIG_ETRAXFS_SIM) - -static void -console_write_direct(struct console *co, const char *buf, unsigned int len) -{ - int i; - reg_ser_r_stat_din stat; - reg_ser_rw_tr_dma_en tr_dma_en, old; - - /* Switch to manual mode */ - tr_dma_en = old = REG_RD (ser, port->instance, rw_tr_dma_en); - if (tr_dma_en.en == regk_ser_yes) { - tr_dma_en.en = regk_ser_no; - REG_WR(ser, port->instance, rw_tr_dma_en, tr_dma_en); - } - - /* Send data */ - for (i = 0; i < len; i++) { - /* LF -> CRLF */ - if (buf[i] == '\n') { - do { - stat = REG_RD (ser, port->instance, r_stat_din); - } while (!stat.tr_rdy); - REG_WR_INT (ser, port->instance, rw_dout, '\r'); - } - /* Wait until transmitter is ready and send.*/ - do { - stat = REG_RD (ser, port->instance, r_stat_din); - } while (!stat.tr_rdy); - REG_WR_INT (ser, port->instance, rw_dout, buf[i]); - } - - /* Restore mode */ - if (tr_dma_en.en != old.en) - REG_WR(ser, port->instance, rw_tr_dma_en, old); -} - -static void -console_write(struct console *co, const char *buf, unsigned int len) -{ - if (!port) - return; - console_write_direct(co, buf, len); -} - - - -#else - -/* VCS debug */ - -static void -console_write(struct console *co, const char *buf, unsigned int len) -{ - char* pos; - pos = memchr(buf, '\n', len); - if (pos) { - int l = ++pos - buf; - memcpy(buffer + buffer_pos, buf, l); - memcpy(buffer, msg, sizeof(msg) - 1); - buffer[buffer_pos + l] = '\0'; - print_str(buffer); - buffer_pos = sizeof(msg) - 1; - if (pos - buf != len) { - memcpy(buffer + buffer_pos, pos, len - l); - buffer_pos += len - l; - } - } else { - memcpy(buffer + buffer_pos, buf, len); - buffer_pos += len; - } -} - -#endif - -int raw_printk(const char *fmt, ...) -{ - static char buf[1024]; - int printed_len; - va_list args; - va_start(args, fmt); - printed_len = vsnprintf(buf, sizeof(buf), fmt, args); - va_end(args); - console_write(NULL, buf, strlen(buf)); - return printed_len; -} - -void -stupid_debug(char* buf) -{ - console_write(NULL, buf, strlen(buf)); -} - #ifdef CONFIG_ETRAX_KGDB /* Use polling to get a single character from the kernel debug port */ int getDebugChar(void) { - reg_ser_rs_status_data stat; + reg_ser_rs_stat_din stat; reg_ser_rw_ack_intr ack_intr = { 0 }; do { - stat = REG_RD(ser, kgdb_instance, rs_status_data); - } while (!stat.data_avail); + stat = REG_RD(ser, kgdb_port->instance, rs_stat_din); + } while (!stat.dav); /* Ack the data_avail interrupt. */ - ack_intr.data_avail = 1; - REG_WR(ser, kgdb_instance, rw_ack_intr, ack_intr); + ack_intr.dav = 1; + REG_WR(ser, kgdb_port->instance, rw_ack_intr, ack_intr); return stat.data; } @@ -282,173 +183,18 @@ getDebugChar(void) void putDebugChar(int val) { - reg_ser_r_status_data stat; + reg_ser_r_stat_din stat; do { - stat = REG_RD (ser, kgdb_instance, r_status_data); - } while (!stat.tr_ready); - REG_WR (ser, kgdb_instance, rw_data_out, REG_TYPE_CONV(reg_ser_rw_data_out, int, val)); + stat = REG_RD(ser, kgdb_port->instance, r_stat_din); + } while (!stat.tr_rdy); + REG_WR_INT(ser, kgdb_port->instance, rw_dout, val); } #endif /* CONFIG_ETRAX_KGDB */ -static int __init -console_setup(struct console *co, char *options) -{ - char* s; - - if (options) { - port = &ports[co->index]; - port->baudrate = 115200; - port->parity = 'N'; - port->bits = 8; - port->baudrate = simple_strtoul(options, NULL, 10); - s = options; - while(*s >= '0' && *s <= '9') - s++; - if (*s) port->parity = *s++; - if (*s) port->bits = *s++ - '0'; - port->started = 0; - start_port(port); - } - return 0; -} - -/* This is a dummy serial device that throws away anything written to it. - * This is used when no debug output is wanted. - */ -static struct tty_driver dummy_driver; - -static int dummy_open(struct tty_struct *tty, struct file * filp) -{ - return 0; -} - -static void dummy_close(struct tty_struct *tty, struct file * filp) -{ -} - -static int dummy_write(struct tty_struct * tty, - const unsigned char *buf, int count) -{ - return count; -} - -static int -dummy_write_room(struct tty_struct *tty) -{ - return 8192; -} - -void __init -init_dummy_console(void) -{ - memset(&dummy_driver, 0, sizeof(struct tty_driver)); - dummy_driver.driver_name = "serial"; - dummy_driver.name = "ttyS"; - dummy_driver.major = TTY_MAJOR; - dummy_driver.minor_start = 68; - dummy_driver.num = 1; /* etrax100 has 4 serial ports */ - dummy_driver.type = TTY_DRIVER_TYPE_SERIAL; - dummy_driver.subtype = SERIAL_TYPE_NORMAL; - dummy_driver.init_termios = tty_std_termios; - dummy_driver.init_termios.c_cflag = - B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */ - dummy_driver.flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; - - dummy_driver.open = dummy_open; - dummy_driver.close = dummy_close; - dummy_driver.write = dummy_write; - dummy_driver.write_room = dummy_write_room; - if (tty_register_driver(&dummy_driver)) - panic("Couldn't register dummy serial driver\n"); -} - -static struct tty_driver* -crisv32_console_device(struct console* co, int *index) -{ - if (port) - *index = port->nbr; - return port ? serial_driver : &dummy_driver; -} - -static struct console sercons = { - name : "ttyS", - write: console_write, - read : NULL, - device : crisv32_console_device, - unblank : NULL, - setup : console_setup, - flags : CON_PRINTBUFFER, - index : -1, - cflag : 0, - next : NULL -}; -static struct console sercons0 = { - name : "ttyS", - write: console_write, - read : NULL, - device : crisv32_console_device, - unblank : NULL, - setup : console_setup, - flags : CON_PRINTBUFFER, - index : 0, - cflag : 0, - next : NULL -}; - -static struct console sercons1 = { - name : "ttyS", - write: console_write, - read : NULL, - device : crisv32_console_device, - unblank : NULL, - setup : console_setup, - flags : CON_PRINTBUFFER, - index : 1, - cflag : 0, - next : NULL -}; -static struct console sercons2 = { - name : "ttyS", - write: console_write, - read : NULL, - device : crisv32_console_device, - unblank : NULL, - setup : console_setup, - flags : CON_PRINTBUFFER, - index : 2, - cflag : 0, - next : NULL -}; -static struct console sercons3 = { - name : "ttyS", - write: console_write, - read : NULL, - device : crisv32_console_device, - unblank : NULL, - setup : console_setup, - flags : CON_PRINTBUFFER, - index : 3, - cflag : 0, - next : NULL -}; - /* Register console for printk's, etc. */ int __init init_etrax_debug(void) { - static int first = 1; - - if (!first) { - unregister_console(&sercons); - register_console(&sercons0); - register_console(&sercons1); - register_console(&sercons2); - register_console(&sercons3); - init_dummy_console(); - return 0; - } - first = 0; - register_console(&sercons); start_port(port); #ifdef CONFIG_ETRAX_KGDB @@ -456,5 +202,3 @@ init_etrax_debug(void) #endif /* CONFIG_ETRAX_KGDB */ return 0; } - -__initcall(init_etrax_debug); diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S index f9d27807b914..eebbaba45430 100644 --- a/arch/cris/arch-v32/kernel/entry.S +++ b/arch/cris/arch-v32/kernel/entry.S @@ -10,7 +10,7 @@ * after a timer-interrupt and after each system call. * * Stack layout in 'ret_from_system_call': - * ptrace needs to have all regs on the stack. + * ptrace needs to have all regs on the stack. * if the order here is changed, it needs to be * updated in fork.c:copy_process, signal.c:do_signal, * ptrace.c and ptrace.h @@ -281,12 +281,10 @@ _work_notifysig: ;; Deal with pending signals and notify-resume requests. addoq +TI_flags, $r0, $acr - move.d [$acr], $r13 ; The thread_info_flags parameter. - move.d $r9, $r10 ; do_notify_resume syscall/irq param. - moveq 0, $r11 ; oldset param - 0 in this case. - move.d $sp, $r12 ; The regs param. + move.d [$acr], $r12 ; The thread_info_flags parameter. + move.d $sp, $r11 ; The regs param. jsr do_notify_resume - nop + move.d $r9, $r10 ; do_notify_resume syscall/irq param. ba _Rexit nop @@ -396,7 +394,7 @@ nmi_interrupt: btstq REG_BIT(intr_vect, r_nmi, watchdog), $r0 bpl 1f nop - jsr handle_watchdog_bite ; In time.c. + jsr handle_watchdog_bite ; In time.c. move.d $sp, $r10 ; Pointer to registers 1: btstq REG_BIT(intr_vect, r_nmi, ext), $r0 bpl 1f @@ -515,6 +513,13 @@ _ugdb_handle_exception: ba do_sigtrap ; SIGTRAP the offending process. move.d [$sp+], $r0 ; Restore R0 in delay slot. + .global kernel_execve +kernel_execve: + move.d __NR_execve, $r9 + break 13 + ret + nop + .data .section .rodata,"a" @@ -778,21 +783,21 @@ sys_call_table: .long sys_epoll_ctl /* 255 */ .long sys_epoll_wait .long sys_remap_file_pages - .long sys_set_tid_address - .long sys_timer_create - .long sys_timer_settime /* 260 */ - .long sys_timer_gettime - .long sys_timer_getoverrun - .long sys_timer_delete - .long sys_clock_settime - .long sys_clock_gettime /* 265 */ - .long sys_clock_getres - .long sys_clock_nanosleep + .long sys_set_tid_address + .long sys_timer_create + .long sys_timer_settime /* 260 */ + .long sys_timer_gettime + .long sys_timer_getoverrun + .long sys_timer_delete + .long sys_clock_settime + .long sys_clock_gettime /* 265 */ + .long sys_clock_getres + .long sys_clock_nanosleep .long sys_statfs64 .long sys_fstatfs64 .long sys_tgkill /* 270 */ .long sys_utimes - .long sys_fadvise64_64 + .long sys_fadvise64_64 .long sys_ni_syscall /* sys_vserver */ .long sys_ni_syscall /* sys_mbind */ .long sys_ni_syscall /* 275 sys_get_mempolicy */ @@ -805,6 +810,48 @@ sys_call_table: .long sys_mq_getsetattr .long sys_ni_syscall /* reserved for kexec */ .long sys_waitid + .long sys_ni_syscall /* 285 */ /* available */ + .long sys_add_key + .long sys_request_key + .long sys_keyctl + .long sys_ioprio_set + .long sys_ioprio_get /* 290 */ + .long sys_inotify_init + .long sys_inotify_add_watch + .long sys_inotify_rm_watch + .long sys_migrate_pages + .long sys_openat /* 295 */ + .long sys_mkdirat + .long sys_mknodat + .long sys_fchownat + .long sys_futimesat + .long sys_fstatat64 /* 300 */ + .long sys_unlinkat + .long sys_renameat + .long sys_linkat + .long sys_symlinkat + .long sys_readlinkat /* 305 */ + .long sys_fchmodat + .long sys_faccessat + .long sys_pselect6 + .long sys_ppoll + .long sys_unshare /* 310 */ + .long sys_set_robust_list + .long sys_get_robust_list + .long sys_splice + .long sys_sync_file_range + .long sys_tee /* 315 */ + .long sys_vmsplice + .long sys_move_pages + .long sys_getcpu + .long sys_epoll_pwait + .long sys_utimensat /* 320 */ + .long sys_signalfd + .long sys_timerfd_create + .long sys_eventfd + .long sys_fallocate + .long sys_timerfd_settime /* 325 */ + .long sys_timerfd_gettime /* * NOTE!! This doesn't have to be exact - we just have diff --git a/arch/cris/arch-v32/kernel/fasttimer.c b/arch/cris/arch-v32/kernel/fasttimer.c index b40551f9f40d..2de9d5849ef0 100644 --- a/arch/cris/arch-v32/kernel/fasttimer.c +++ b/arch/cris/arch-v32/kernel/fasttimer.c @@ -1,110 +1,9 @@ -/* $Id: fasttimer.c,v 1.11 2005/01/04 11:15:46 starvik Exp $ +/* * linux/arch/cris/kernel/fasttimer.c * * Fast timers for ETRAX FS - * This may be useful in other OS than Linux so use 2 space indentation... - * - * $Log: fasttimer.c,v $ - * Revision 1.11 2005/01/04 11:15:46 starvik - * Don't share timer IRQ. - * - * Revision 1.10 2004/12/07 09:19:38 starvik - * Corrected includes. - * Use correct interrupt macros. - * - * Revision 1.9 2004/05/14 10:18:58 starvik - * Export fast_timer_list - * - * Revision 1.8 2004/05/14 07:58:03 starvik - * Merge of changes from 2.4 - * - * Revision 1.7 2003/07/10 12:06:14 starvik - * Return IRQ_NONE if irq wasn't handled - * - * Revision 1.6 2003/07/04 08:27:49 starvik - * Merge of Linux 2.5.74 - * - * Revision 1.5 2003/06/05 10:16:22 johana - * New INTR_VECT macros. - * - * Revision 1.4 2003/06/03 08:49:45 johana - * Fixed typo. - * - * Revision 1.3 2003/06/02 12:51:27 johana - * Now compiles. - * Commented some include files that probably can be removed. - * - * Revision 1.2 2003/06/02 12:09:41 johana - * Ported to ETRAX FS using the trig interrupt instead of timer1. - * - * Revision 1.3 2002/12/12 08:26:32 starvik - * Don't use C-comments inside CVS comments - * - * Revision 1.2 2002/12/11 15:42:02 starvik - * Extracted v10 (ETRAX 100LX) specific stuff from arch/cris/kernel/ - * - * Revision 1.1 2002/11/18 07:58:06 starvik - * Fast timers (from Linux 2.4) - * - * Revision 1.5 2002/10/15 06:21:39 starvik - * Added call to init_waitqueue_head * - * Revision 1.4 2002/05/28 17:47:59 johana - * Added del_fast_timer() - * - * Revision 1.3 2002/05/28 16:16:07 johana - * Handle empty fast_timer_list - * - * Revision 1.2 2002/05/27 15:38:42 johana - * Made it compile without warnings on Linux 2.4. - * (includes, wait_queue, PROC_FS and snprintf) - * - * Revision 1.1 2002/05/27 15:32:25 johana - * arch/etrax100/kernel/fasttimer.c v1.8 from the elinux tree. - * - * Revision 1.8 2001/11/27 13:50:40 pkj - * Disable interrupts while stopping the timer and while modifying the - * list of active timers in timer1_handler() as it may be interrupted - * by other interrupts (e.g., the serial interrupt) which may add fast - * timers. - * - * Revision 1.7 2001/11/22 11:50:32 pkj - * * Only store information about the last 16 timers. - * * proc_fasttimer_read() now uses an allocated buffer, since it - * requires more space than just a page even for only writing the - * last 16 timers. The buffer is only allocated on request, so - * unless /proc/fasttimer is read, it is never allocated. - * * Renamed fast_timer_started to fast_timers_started to match - * fast_timers_added and fast_timers_expired. - * * Some clean-up. - * - * Revision 1.6 2000/12/13 14:02:08 johana - * Removed volatile for fast_timer_list - * - * Revision 1.5 2000/12/13 13:55:35 johana - * Added DEBUG_LOG, added som cli() and cleanup - * - * Revision 1.4 2000/12/05 13:48:50 johana - * Added range check when writing proc file, modified timer int handling - * - * Revision 1.3 2000/11/23 10:10:20 johana - * More debug/logging possibilities. - * Moved GET_JIFFIES_USEC() to timex.h and time.c - * - * Revision 1.2 2000/11/01 13:41:04 johana - * Clean up and bugfixes. - * Created new do_gettimeofday_fast() that gets a timeval struct - * with time based on jiffies and *R_TIMER0_DATA, uses a table - * for fast conversion of timer value to microseconds. - * (Much faster the standard do_gettimeofday() and we don't really - * want to use the true time - we want the "uptime" so timers don't screw up - * when we change the time. - * TODO: Add efficient support for continuous timers as well. - * - * Revision 1.1 2000/10/26 15:49:16 johana - * Added fasttimer, highresolution timers. - * - * Copyright (C) 2000,2001 2002, 2003 Axis Communications AB, Lund, Sweden + * Copyright (C) 2000-2006 Axis Communications AB, Lund, Sweden */ #include <linux/errno.h> @@ -122,9 +21,9 @@ #include <linux/version.h> -#include <asm/arch/hwregs/reg_map.h> -#include <asm/arch/hwregs/reg_rdwr.h> -#include <asm/arch/hwregs/timer_defs.h> +#include <hwregs/reg_map.h> +#include <hwregs/reg_rdwr.h> +#include <hwregs/timer_defs.h> #include <asm/fasttimer.h> #include <linux/proc_fs.h> @@ -140,30 +39,25 @@ #define DEBUG_LOG_INCLUDED #define FAST_TIMER_LOG -//#define FAST_TIMER_TEST +/* #define FAST_TIMER_TEST */ #define FAST_TIMER_SANITY_CHECKS #ifdef FAST_TIMER_SANITY_CHECKS -#define SANITYCHECK(x) x -static int sanity_failed = 0; -#else -#define SANITYCHECK(x) +static int sanity_failed; #endif #define D1(x) #define D2(x) #define DP(x) -#define __INLINE__ inline - -static int fast_timer_running = 0; -static int fast_timers_added = 0; -static int fast_timers_started = 0; -static int fast_timers_expired = 0; -static int fast_timers_deleted = 0; -static int fast_timer_is_init = 0; -static int fast_timer_ints = 0; +static unsigned int fast_timer_running; +static unsigned int fast_timers_added; +static unsigned int fast_timers_started; +static unsigned int fast_timers_expired; +static unsigned int fast_timers_deleted; +static unsigned int fast_timer_is_init; +static unsigned int fast_timer_ints; struct fast_timer *fast_timer_list = NULL; @@ -171,8 +65,8 @@ struct fast_timer *fast_timer_list = NULL; #define DEBUG_LOG_MAX 128 static const char * debug_log_string[DEBUG_LOG_MAX]; static unsigned long debug_log_value[DEBUG_LOG_MAX]; -static int debug_log_cnt = 0; -static int debug_log_cnt_wrapped = 0; +static unsigned int debug_log_cnt; +static unsigned int debug_log_cnt_wrapped; #define DEBUG_LOG(string, value) \ { \ @@ -202,103 +96,92 @@ struct fast_timer timer_expired_log[NUM_TIMER_STATS]; int timer_div_settings[NUM_TIMER_STATS]; int timer_delay_settings[NUM_TIMER_STATS]; +struct work_struct fast_work; static void -timer_trig_handler(void); +timer_trig_handler(struct work_struct *work); /* Not true gettimeofday, only checks the jiffies (uptime) + useconds */ -void __INLINE__ do_gettimeofday_fast(struct timeval *tv) +inline void do_gettimeofday_fast(struct fasttime_t *tv) { - unsigned long sec = jiffies; - unsigned long usec = GET_JIFFIES_USEC(); - - usec += (sec % HZ) * (1000000 / HZ); - sec = sec / HZ; - - if (usec > 1000000) - { - usec -= 1000000; - sec++; - } - tv->tv_sec = sec; - tv->tv_usec = usec; + tv->tv_jiff = jiffies; + tv->tv_usec = GET_JIFFIES_USEC(); } -int __INLINE__ timeval_cmp(struct timeval *t0, struct timeval *t1) +inline int fasttime_cmp(struct fasttime_t *t0, struct fasttime_t *t1) { - if (t0->tv_sec < t1->tv_sec) - { - return -1; - } - else if (t0->tv_sec > t1->tv_sec) - { - return 1; - } - if (t0->tv_usec < t1->tv_usec) - { - return -1; - } - else if (t0->tv_usec > t1->tv_usec) - { - return 1; - } - return 0; + /* Compare jiffies. Takes care of wrapping */ + if (time_before(t0->tv_jiff, t1->tv_jiff)) + return -1; + else if (time_after(t0->tv_jiff, t1->tv_jiff)) + return 1; + + /* Compare us */ + if (t0->tv_usec < t1->tv_usec) + return -1; + else if (t0->tv_usec > t1->tv_usec) + return 1; + return 0; } /* Called with ints off */ -void __INLINE__ start_timer_trig(unsigned long delay_us) +inline void start_timer_trig(unsigned long delay_us) { reg_timer_rw_ack_intr ack_intr = { 0 }; reg_timer_rw_intr_mask intr_mask; reg_timer_rw_trig trig; reg_timer_rw_trig_cfg trig_cfg = { 0 }; - reg_timer_r_time r_time; + reg_timer_r_time r_time0; + reg_timer_r_time r_time1; + unsigned char trig_wrap; + unsigned char time_wrap; - r_time = REG_RD(timer, regi_timer, r_time); + r_time0 = REG_RD(timer, regi_timer0, r_time); D1(printk("start_timer_trig : %d us freq: %i div: %i\n", delay_us, freq_index, div)); /* Clear trig irq */ - intr_mask = REG_RD(timer, regi_timer, rw_intr_mask); + intr_mask = REG_RD(timer, regi_timer0, rw_intr_mask); intr_mask.trig = 0; - REG_WR(timer, regi_timer, rw_intr_mask, intr_mask); + REG_WR(timer, regi_timer0, rw_intr_mask, intr_mask); - /* Set timer values */ - /* r_time is 100MHz (10 ns resolution) */ - trig = r_time + delay_us*(1000/10); + /* Set timer values and check if trigger wraps. */ + /* r_time is 100MHz (10 ns resolution) */ + trig_wrap = (trig = r_time0 + delay_us*(1000/10)) < r_time0; timer_div_settings[fast_timers_started % NUM_TIMER_STATS] = trig; timer_delay_settings[fast_timers_started % NUM_TIMER_STATS] = delay_us; /* Ack interrupt */ ack_intr.trig = 1; - REG_WR(timer, regi_timer, rw_ack_intr, ack_intr); + REG_WR(timer, regi_timer0, rw_ack_intr, ack_intr); /* Start timer */ - REG_WR(timer, regi_timer, rw_trig, trig); + REG_WR(timer, regi_timer0, rw_trig, trig); trig_cfg.tmr = regk_timer_time; - REG_WR(timer, regi_timer, rw_trig_cfg, trig_cfg); + REG_WR(timer, regi_timer0, rw_trig_cfg, trig_cfg); /* Check if we have already passed the trig time */ - r_time = REG_RD(timer, regi_timer, r_time); - if (r_time < trig) { + r_time1 = REG_RD(timer, regi_timer0, r_time); + time_wrap = r_time1 < r_time0; + + if ((trig_wrap && !time_wrap) || (r_time1 < trig)) { /* No, Enable trig irq */ - intr_mask = REG_RD(timer, regi_timer, rw_intr_mask); + intr_mask = REG_RD(timer, regi_timer0, rw_intr_mask); intr_mask.trig = 1; - REG_WR(timer, regi_timer, rw_intr_mask, intr_mask); + REG_WR(timer, regi_timer0, rw_intr_mask, intr_mask); fast_timers_started++; fast_timer_running = 1; - } - else - { + } else { /* We have passed the time, disable trig point, ack intr */ trig_cfg.tmr = regk_timer_off; - REG_WR(timer, regi_timer, rw_trig_cfg, trig_cfg); - REG_WR(timer, regi_timer, rw_ack_intr, ack_intr); - /* call the int routine directly */ - timer_trig_handler(); + REG_WR(timer, regi_timer0, rw_trig_cfg, trig_cfg); + REG_WR(timer, regi_timer0, rw_ack_intr, ack_intr); + /* call the int routine */ + INIT_WORK(&fast_work, timer_trig_handler); + schedule_work(&fast_work); } } @@ -320,22 +203,20 @@ void start_one_shot_timer(struct fast_timer *t, do_gettimeofday_fast(&t->tv_set); tmp = fast_timer_list; - SANITYCHECK({ /* Check so this is not in the list already... */ - while (tmp != NULL) - { - if (tmp == t) - { - printk("timer name: %s data: 0x%08lX already in list!\n", name, data); - sanity_failed++; - return; - } - else - { - tmp = tmp->next; - } - } - tmp = fast_timer_list; - }); +#ifdef FAST_TIMER_SANITY_CHECKS + /* Check so this is not in the list already... */ + while (tmp != NULL) { + if (tmp == t) { + printk(KERN_DEBUG + "timer name: %s data: 0x%08lX already " + "in list!\n", name, data); + sanity_failed++; + goto done; + } else + tmp = tmp->next; + } + tmp = fast_timer_list; +#endif t->delay_us = delay_us; t->function = function; @@ -343,11 +224,10 @@ void start_one_shot_timer(struct fast_timer *t, t->name = name; t->tv_expires.tv_usec = t->tv_set.tv_usec + delay_us % 1000000; - t->tv_expires.tv_sec = t->tv_set.tv_sec + delay_us / 1000000; - if (t->tv_expires.tv_usec > 1000000) - { + t->tv_expires.tv_jiff = t->tv_set.tv_jiff + delay_us / 1000000 / HZ; + if (t->tv_expires.tv_usec > 1000000) { t->tv_expires.tv_usec -= 1000000; - t->tv_expires.tv_sec++; + t->tv_expires.tv_jiff += HZ; } #ifdef FAST_TIMER_LOG timer_added_log[fast_timers_added % NUM_TIMER_STATS] = *t; @@ -355,15 +235,12 @@ void start_one_shot_timer(struct fast_timer *t, fast_timers_added++; /* Check if this should timeout before anything else */ - if (tmp == NULL || timeval_cmp(&t->tv_expires, &tmp->tv_expires) < 0) - { + if (tmp == NULL || fasttime_cmp(&t->tv_expires, &tmp->tv_expires) < 0) { /* Put first in list and modify the timer value */ t->prev = NULL; t->next = fast_timer_list; if (fast_timer_list) - { fast_timer_list->prev = t; - } fast_timer_list = t; #ifdef FAST_TIMER_LOG timer_started_log[fast_timers_started % NUM_TIMER_STATS] = *t; @@ -372,10 +249,8 @@ void start_one_shot_timer(struct fast_timer *t, } else { /* Put in correct place in list */ while (tmp->next && - timeval_cmp(&t->tv_expires, &tmp->next->tv_expires) > 0) - { + fasttime_cmp(&t->tv_expires, &tmp->next->tv_expires) > 0) tmp = tmp->next; - } /* Insert t after tmp */ t->prev = tmp; t->next = tmp->next; @@ -388,6 +263,7 @@ void start_one_shot_timer(struct fast_timer *t, D2(printk("start_one_shot_timer: %d us done\n", delay_us)); +done: local_irq_restore(flags); } /* start_one_shot_timer */ @@ -431,19 +307,18 @@ int del_fast_timer(struct fast_timer * t) /* Timer interrupt handler for trig interrupts */ static irqreturn_t -timer_trig_interrupt(int irq, void *dev_id, struct pt_regs *regs) +timer_trig_interrupt(int irq, void *dev_id) { reg_timer_r_masked_intr masked_intr; - /* Check if the timer interrupt is for us (a trig int) */ - masked_intr = REG_RD(timer, regi_timer, r_masked_intr); + masked_intr = REG_RD(timer, regi_timer0, r_masked_intr); if (!masked_intr.trig) return IRQ_NONE; - timer_trig_handler(); + timer_trig_handler(NULL); return IRQ_HANDLED; } -static void timer_trig_handler(void) +static void timer_trig_handler(struct work_struct *work) { reg_timer_rw_ack_intr ack_intr = { 0 }; reg_timer_rw_intr_mask intr_mask; @@ -451,38 +326,45 @@ static void timer_trig_handler(void) struct fast_timer *t; unsigned long flags; + /* We keep interrupts disabled not only when we modify the + * fast timer list, but any time we hold a reference to a + * timer in the list, since del_fast_timer may be called + * from (another) interrupt context. Thus, the only time + * when interrupts are enabled is when calling the timer + * callback function. + */ local_irq_save(flags); /* Clear timer trig interrupt */ - intr_mask = REG_RD(timer, regi_timer, rw_intr_mask); + intr_mask = REG_RD(timer, regi_timer0, rw_intr_mask); intr_mask.trig = 0; - REG_WR(timer, regi_timer, rw_intr_mask, intr_mask); + REG_WR(timer, regi_timer0, rw_intr_mask, intr_mask); /* First stop timer, then ack interrupt */ /* Stop timer */ trig_cfg.tmr = regk_timer_off; - REG_WR(timer, regi_timer, rw_trig_cfg, trig_cfg); + REG_WR(timer, regi_timer0, rw_trig_cfg, trig_cfg); /* Ack interrupt */ ack_intr.trig = 1; - REG_WR(timer, regi_timer, rw_ack_intr, ack_intr); + REG_WR(timer, regi_timer0, rw_ack_intr, ack_intr); fast_timer_running = 0; fast_timer_ints++; - local_irq_restore(flags); + fast_timer_function_type *f; + unsigned long d; t = fast_timer_list; - while (t) - { - struct timeval tv; + while (t) { + struct fasttime_t tv; /* Has it really expired? */ do_gettimeofday_fast(&tv); - D1(printk("t: %is %06ius\n", tv.tv_sec, tv.tv_usec)); + D1(printk(KERN_DEBUG + "t: %is %06ius\n", tv.tv_jiff, tv.tv_usec)); - if (timeval_cmp(&t->tv_expires, &tv) <= 0) - { + if (fasttime_cmp(&t->tv_expires, &tv) <= 0) { /* Yes it has expired */ #ifdef FAST_TIMER_LOG timer_expired_log[fast_timers_expired % NUM_TIMER_STATS] = *t; @@ -490,84 +372,77 @@ static void timer_trig_handler(void) fast_timers_expired++; /* Remove this timer before call, since it may reuse the timer */ - local_irq_save(flags); if (t->prev) - { t->prev->next = t->next; - } else - { fast_timer_list = t->next; - } if (t->next) - { t->next->prev = t->prev; - } t->prev = NULL; t->next = NULL; - local_irq_restore(flags); - if (t->function != NULL) - { - t->function(t->data); - } - else - { + /* Save function callback data before enabling + * interrupts, since the timer may be removed and we + * don't know how it was allocated (e.g. ->function + * and ->data may become overwritten after deletion + * if the timer was stack-allocated). + */ + f = t->function; + d = t->data; + + if (f != NULL) { + /* Run the callback function with interrupts + * enabled. */ + local_irq_restore(flags); + f(d); + local_irq_save(flags); + } else DEBUG_LOG("!trimertrig %i function==NULL!\n", fast_timer_ints); - } - } - else - { + } else { /* Timer is to early, let's set it again using the normal routines */ D1(printk(".\n")); } - local_irq_save(flags); - if ((t = fast_timer_list) != NULL) - { + t = fast_timer_list; + if (t != NULL) { /* Start next timer.. */ - long us; - struct timeval tv; + long us = 0; + struct fasttime_t tv; do_gettimeofday_fast(&tv); - us = ((t->tv_expires.tv_sec - tv.tv_sec) * 1000000 + - t->tv_expires.tv_usec - tv.tv_usec); - if (us > 0) - { - if (!fast_timer_running) - { + + /* time_after_eq takes care of wrapping */ + if (time_after_eq(t->tv_expires.tv_jiff, tv.tv_jiff)) + us = ((t->tv_expires.tv_jiff - tv.tv_jiff) * + 1000000 / HZ + t->tv_expires.tv_usec - + tv.tv_usec); + + if (us > 0) { + if (!fast_timer_running) { #ifdef FAST_TIMER_LOG timer_started_log[fast_timers_started % NUM_TIMER_STATS] = *t; #endif start_timer_trig(us); } - local_irq_restore(flags); break; - } - else - { + } else { /* Timer already expired, let's handle it better late than never. * The normal loop handles it */ D1(printk("e! %d\n", us)); } } - local_irq_restore(flags); } - if (!t) - { + local_irq_restore(flags); + + if (!t) D1(printk("ttrig stop!\n")); - } } static void wake_up_func(unsigned long data) { -#ifdef DECLARE_WAITQUEUE wait_queue_head_t *sleep_wait_p = (wait_queue_head_t*)data; -#else - struct wait_queue **sleep_wait_p = (struct wait_queue **)data; -#endif wake_up(sleep_wait_p); } @@ -577,28 +452,17 @@ static void wake_up_func(unsigned long data) void schedule_usleep(unsigned long us) { struct fast_timer t; -#ifdef DECLARE_WAITQUEUE wait_queue_head_t sleep_wait; init_waitqueue_head(&sleep_wait); - { - DECLARE_WAITQUEUE(wait, current); -#else - struct wait_queue *sleep_wait = NULL; - struct wait_queue wait = { current, NULL }; -#endif D1(printk("schedule_usleep(%d)\n", us)); - add_wait_queue(&sleep_wait, &wait); - set_current_state(TASK_INTERRUPTIBLE); start_one_shot_timer(&t, wake_up_func, (unsigned long)&sleep_wait, us, "usleep"); - schedule(); - set_current_state(TASK_RUNNING); - remove_wait_queue(&sleep_wait, &wait); + /* Uninterruptible sleep on the fast timer. (The condition is + * somewhat redundant since the timer is what wakes us up.) */ + wait_event(sleep_wait, !fast_timer_pending(&t)); + D1(printk("done schedule_usleep(%d)\n", us)); -#ifdef DECLARE_WAITQUEUE - } -#endif } #ifdef CONFIG_PROC_FS @@ -618,20 +482,22 @@ static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len unsigned long flags; int i = 0; int num_to_show; - struct timeval tv; + struct fasttime_t tv; struct fast_timer *t, *nextt; static char *bigbuf = NULL; static unsigned long used; - if (!bigbuf && !(bigbuf = vmalloc(BIG_BUF_SIZE))) - { - used = 0; - bigbuf[0] = '\0'; - return 0; - } - - if (!offset || !used) - { + if (!bigbuf) { + bigbuf = vmalloc(BIG_BUF_SIZE); + if (!bigbuf) { + used = 0; + if (buf) + buf[0] = '\0'; + return 0; + } + } + + if (!offset || !used) { do_gettimeofday_fast(&tv); used = 0; @@ -648,7 +514,7 @@ static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len used += sprintf(bigbuf + used, "Fast timer running: %s\n", fast_timer_running ? "yes" : "no"); used += sprintf(bigbuf + used, "Current time: %lu.%06lu\n", - (unsigned long)tv.tv_sec, + (unsigned long)tv.tv_jiff, (unsigned long)tv.tv_usec); #ifdef FAST_TIMER_SANITY_CHECKS used += sprintf(bigbuf + used, "Sanity failed: %i\n", @@ -661,10 +527,8 @@ static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len int end_i = debug_log_cnt; i = 0; - if (debug_log_cnt_wrapped) - { + if (debug_log_cnt_wrapped) i = debug_log_cnt; - } while ((i != end_i || (debug_log_cnt_wrapped && !used)) && used+100 < BIG_BUF_SIZE) @@ -697,9 +561,9 @@ static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len "d: %6li us data: 0x%08lX" "\n", t->name, - (unsigned long)t->tv_set.tv_sec, + (unsigned long)t->tv_set.tv_jiff, (unsigned long)t->tv_set.tv_usec, - (unsigned long)t->tv_expires.tv_sec, + (unsigned long)t->tv_expires.tv_jiff, (unsigned long)t->tv_expires.tv_usec, t->delay_us, t->data @@ -719,9 +583,9 @@ static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len "d: %6li us data: 0x%08lX" "\n", t->name, - (unsigned long)t->tv_set.tv_sec, + (unsigned long)t->tv_set.tv_jiff, (unsigned long)t->tv_set.tv_usec, - (unsigned long)t->tv_expires.tv_sec, + (unsigned long)t->tv_expires.tv_jiff, (unsigned long)t->tv_expires.tv_usec, t->delay_us, t->data @@ -739,9 +603,9 @@ static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len "d: %6li us data: 0x%08lX" "\n", t->name, - (unsigned long)t->tv_set.tv_sec, + (unsigned long)t->tv_set.tv_jiff, (unsigned long)t->tv_set.tv_usec, - (unsigned long)t->tv_expires.tv_sec, + (unsigned long)t->tv_expires.tv_jiff, (unsigned long)t->tv_expires.tv_usec, t->delay_us, t->data @@ -752,26 +616,25 @@ static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len used += sprintf(bigbuf + used, "Active timers:\n"); local_irq_save(flags); - local_irq_save(flags); t = fast_timer_list; while (t != NULL && (used+100 < BIG_BUF_SIZE)) { nextt = t->next; local_irq_restore(flags); used += sprintf(bigbuf + used, "%-14s s: %6lu.%06lu e: %6lu.%06lu " - "d: %6li us data: 0x%08lX" -/* " func: 0x%08lX" */ - "\n", - t->name, - (unsigned long)t->tv_set.tv_sec, - (unsigned long)t->tv_set.tv_usec, - (unsigned long)t->tv_expires.tv_sec, - (unsigned long)t->tv_expires.tv_usec, + "d: %6li us data: 0x%08lX" +/* " func: 0x%08lX" */ + "\n", + t->name, + (unsigned long)t->tv_set.tv_jiff, + (unsigned long)t->tv_set.tv_usec, + (unsigned long)t->tv_expires.tv_jiff, + (unsigned long)t->tv_expires.tv_usec, t->delay_us, t->data /* , t->function */ ); - local_irq_disable(); + local_irq_save(flags); if (t->next != nextt) { printk("timer removed!\n"); @@ -800,7 +663,7 @@ static volatile int num_test_timeout = 0; static struct fast_timer tr[10]; static int exp_num[10]; -static struct timeval tv_exp[100]; +static struct fasttime_t tv_exp[100]; static void test_timeout(unsigned long data) { @@ -838,7 +701,7 @@ static void fast_timer_test(void) int prev_num; int j; - struct timeval tv, tv0, tv1, tv2; + struct fasttime_t tv, tv0, tv1, tv2; printk("fast_timer_test() start\n"); do_gettimeofday_fast(&tv); @@ -851,21 +714,22 @@ static void fast_timer_test(void) { do_gettimeofday_fast(&tv_exp[j]); } - printk("fast_timer_test() %is %06i\n", tv.tv_sec, tv.tv_usec); + printk(KERN_DEBUG "fast_timer_test() %is %06i\n", tv.tv_jiff, tv.tv_usec); for (j = 0; j < 1000; j++) { - printk("%i %i %i %i %i\n",j_u[j], j_u[j+1], j_u[j+2], j_u[j+3], j_u[j+4]); + printk(KERN_DEBUG "%i %i %i %i %i\n", + j_u[j], j_u[j+1], j_u[j+2], j_u[j+3], j_u[j+4]); j += 4; } for (j = 0; j < 100; j++) { - printk("%i.%i %i.%i %i.%i %i.%i %i.%i\n", - tv_exp[j].tv_sec,tv_exp[j].tv_usec, - tv_exp[j+1].tv_sec,tv_exp[j+1].tv_usec, - tv_exp[j+2].tv_sec,tv_exp[j+2].tv_usec, - tv_exp[j+3].tv_sec,tv_exp[j+3].tv_usec, - tv_exp[j+4].tv_sec,tv_exp[j+4].tv_usec); + printk(KERN_DEBUG "%i.%i %i.%i %i.%i %i.%i %i.%i\n", + tv_exp[j].tv_jiff, tv_exp[j].tv_usec, + tv_exp[j+1].tv_jiff, tv_exp[j+1].tv_usec, + tv_exp[j+2].tv_jiff, tv_exp[j+2].tv_usec, + tv_exp[j+3].tv_jiff, tv_exp[j+3].tv_usec, + tv_exp[j+4].tv_jiff, tv_exp[j+4].tv_usec); j += 4; } do_gettimeofday_fast(&tv0); @@ -892,14 +756,15 @@ static void fast_timer_test(void) while (num_test_timeout < i) { if (num_test_timeout != prev_num) - { prev_num = num_test_timeout; - } } do_gettimeofday_fast(&tv2); - printk("Timers started %is %06i\n", tv0.tv_sec, tv0.tv_usec); - printk("Timers started at %is %06i\n", tv1.tv_sec, tv1.tv_usec); - printk("Timers done %is %06i\n", tv2.tv_sec, tv2.tv_usec); + printk(KERN_INFO "Timers started %is %06i\n", + tv0.tv_jiff, tv0.tv_usec); + printk(KERN_INFO "Timers started at %is %06i\n", + tv1.tv_jiff, tv1.tv_usec); + printk(KERN_INFO "Timers done %is %06i\n", + tv2.tv_jiff, tv2.tv_usec); DP(printk("buf0:\n"); printk(buf0); printk("buf1:\n"); @@ -921,9 +786,9 @@ static void fast_timer_test(void) printk("%-10s set: %6is %06ius exp: %6is %06ius " "data: 0x%08X func: 0x%08X\n", t->name, - t->tv_set.tv_sec, + t->tv_set.tv_jiff, t->tv_set.tv_usec, - t->tv_expires.tv_sec, + t->tv_expires.tv_jiff, t->tv_expires.tv_usec, t->data, t->function @@ -931,10 +796,12 @@ static void fast_timer_test(void) printk(" del: %6ius did exp: %6is %06ius as #%i error: %6li\n", t->delay_us, - tv_exp[j].tv_sec, + tv_exp[j].tv_jiff, tv_exp[j].tv_usec, exp_num[j], - (tv_exp[j].tv_sec - t->tv_expires.tv_sec)*1000000 + tv_exp[j].tv_usec - t->tv_expires.tv_usec); + (tv_exp[j].tv_jiff - t->tv_expires.tv_jiff) * + 1000000 + tv_exp[j].tv_usec - + t->tv_expires.tv_usec); } proc_fasttimer_read(buf5, NULL, 0, 0, 0); printk("buf5 after all done:\n"); @@ -944,7 +811,7 @@ static void fast_timer_test(void) #endif -void fast_timer_init(void) +int fast_timer_init(void) { /* For some reason, request_irq() hangs when called froom time_init() */ if (!fast_timer_is_init) @@ -952,18 +819,20 @@ void fast_timer_init(void) printk("fast_timer_init()\n"); #ifdef CONFIG_PROC_FS - if ((fasttimer_proc_entry = create_proc_entry( "fasttimer", 0, 0 ))) - fasttimer_proc_entry->read_proc = proc_fasttimer_read; + fasttimer_proc_entry = create_proc_entry("fasttimer", 0, 0); + if (fasttimer_proc_entry) + fasttimer_proc_entry->read_proc = proc_fasttimer_read; #endif /* PROC_FS */ - if(request_irq(TIMER_INTR_VECT, timer_trig_interrupt, IRQF_DISABLED, - "fast timer int", NULL)) - { - printk("err: timer1 irq\n"); - } + if (request_irq(TIMER0_INTR_VECT, timer_trig_interrupt, + IRQF_SHARED | IRQF_DISABLED, + "fast timer int", &fast_timer_list)) + printk(KERN_ERR "err: fasttimer irq\n"); fast_timer_is_init = 1; #ifdef FAST_TIMER_TEST printk("do test\n"); fast_timer_test(); #endif } + return 0; } +__initcall(fast_timer_init); diff --git a/arch/cris/arch-v32/kernel/head.S b/arch/cris/arch-v32/kernel/head.S index 20bd80a84e48..2d66a7c320e1 100644 --- a/arch/cris/arch-v32/kernel/head.S +++ b/arch/cris/arch-v32/kernel/head.S @@ -4,22 +4,25 @@ * Copyright (C) 2003, Axis Communications AB */ - #define ASSEMBLER_MACROS_ONLY /* * The macros found in mmu_defs_asm.h uses the ## concatenation operator, so * -traditional must not be used when assembling this file. */ -#include <asm/arch/hwregs/reg_rdwr.h> -#include <asm/arch/hwregs/asm/mmu_defs_asm.h> -#include <asm/arch/hwregs/asm/reg_map_asm.h> -#include <asm/arch/hwregs/asm/config_defs_asm.h> -#include <asm/arch/hwregs/asm/bif_core_defs_asm.h> +#include <hwregs/reg_rdwr.h> +#include <asm/arch/memmap.h> +#include <hwregs/intr_vect.h> +#include <hwregs/asm/mmu_defs_asm.h> +#include <hwregs/asm/reg_map_asm.h> +#include <asm/arch/mach/startup.inc> #define CRAMFS_MAGIC 0x28cd3d45 +#define JHEAD_MAGIC 0x1FF528A6 +#define JHEAD_SIZE 8 #define RAM_INIT_MAGIC 0x56902387 #define COMMAND_LINE_MAGIC 0x87109563 +#define NAND_BOOT_MAGIC 0x9a9db001 ;; NOTE: R8 and R9 carry information from the decompressor (if the ;; kernel was compressed). They must not be used in the code below @@ -30,12 +33,11 @@ .global romfs_start .global romfs_length .global romfs_in_flash + .global nand_boot .global swapper_pg_dir - .global crisv32_nand_boot - .global crisv32_nand_cramfs_offset ;; Dummy section to make it bootable with current VCS simulator -#ifdef CONFIG_ETRAXFS_SIM +#ifdef CONFIG_ETRAX_VCS_SIM .section ".boot", "ax" ba tstart nop @@ -51,33 +53,15 @@ tstart: ;; di - ;; Start clocks for used blocks. - move.d REG_ADDR(config, regi_config, rw_clk_ctrl), $r1 - move.d [$r1], $r0 - or.d REG_STATE(config, rw_clk_ctrl, cpu, yes) | \ - REG_STATE(config, rw_clk_ctrl, bif, yes) | \ - REG_STATE(config, rw_clk_ctrl, fix_io, yes), $r0 - move.d $r0, [$r1] - - ;; Set up waitstates etc - move.d REG_ADDR(bif_core, regi_bif_core, rw_grp1_cfg), $r0 - move.d CONFIG_ETRAX_MEM_GRP1_CONFIG, $r1 - move.d $r1, [$r0] - move.d REG_ADDR(bif_core, regi_bif_core, rw_grp2_cfg), $r0 - move.d CONFIG_ETRAX_MEM_GRP2_CONFIG, $r1 - move.d $r1, [$r0] - move.d REG_ADDR(bif_core, regi_bif_core, rw_grp3_cfg), $r0 - move.d CONFIG_ETRAX_MEM_GRP3_CONFIG, $r1 - move.d $r1, [$r0] - move.d REG_ADDR(bif_core, regi_bif_core, rw_grp4_cfg), $r0 - move.d CONFIG_ETRAX_MEM_GRP4_CONFIG, $r1 - move.d $r1, [$r0] - -#ifdef CONFIG_ETRAXFS_SIM - ;; Set up minimal flash waitstates - move.d 0, $r10 - move.d REG_ADDR(bif_core, regi_bif_core, rw_grp1_cfg), $r11 - move.d $r10, [$r11] + START_CLOCKS + + SETUP_WAIT_STATES + + GIO_INIT + +#ifdef CONFIG_SMP +secondary_cpu_entry: /* Entry point for secondary CPUs */ + di #endif ;; Setup and enable the MMU. Use same configuration for both the data @@ -85,7 +69,7 @@ tstart: ;; ;; Note; 3 cycles is needed for a bank-select to take effect. Further; ;; bank 1 is the instruction MMU, bank 2 is the data MMU. -#ifndef CONFIG_ETRAXFS_SIM +#ifndef CONFIG_ETRAX_VCS_SIM move.d REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 8) \ | REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 4) \ | REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb), $r0 @@ -93,7 +77,7 @@ tstart: ;; Map the virtual DRAM to the RW eprom area at address 0. ;; Also map 0xa for the hook calls, move.d REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 8) \ - | REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 0) \ + | REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 4) \ | REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb) \ | REG_FIELD(mmu, rw_mm_kbase_hi, base_a, 0xa), $r0 #endif @@ -104,7 +88,7 @@ tstart: ;; Enable certain page protections and setup linear mapping ;; for f,e,c,b,4,0. -#ifndef CONFIG_ETRAXFS_SIM +#ifndef CONFIG_ETRAX_VCS_SIM move.d REG_STATE(mmu, rw_mm_cfg, we, on) \ | REG_STATE(mmu, rw_mm_cfg, acc, on) \ | REG_STATE(mmu, rw_mm_cfg, ex, on) \ @@ -183,17 +167,11 @@ tstart: nop nop nop - move $s10, $r0 + move $s12, $r0 cmpq 0, $r0 beq master_cpu nop slave_cpu: - ; A slave waits for cpu_now_booting to be equal to CPU ID. - move.d cpu_now_booting, $r1 -slave_wait: - cmp.d [$r1], $r0 - bne slave_wait - nop ; Time to boot-up. Get stack location provided by master CPU. move.d smp_init_current_idle_thread, $r1 move.d [$r1], $sp @@ -203,9 +181,16 @@ slave_wait: jsr smp_callin nop master_cpu: + /* Set up entry point for secondary CPUs. The boot ROM has set up + * EBP at start of internal memory. The CPU will get there + * later when we issue an IPI to them... */ + move.d MEM_INTMEM_START + IPI_INTR_VECT * 4, $r0 + move.d secondary_cpu_entry, $r1 + move.d $r1, [$r0] #endif -#ifndef CONFIG_ETRAXFS_SIM - ;; Check if starting from DRAM or flash. +#ifndef CONFIG_ETRAX_VCS_SIM + ; Check if starting from DRAM (network->RAM boot or unpacked + ; compressed kernel), or directly from flash. lapcq ., $r0 and.d 0x7fffffff, $r0 ; Mask off the non-cache bit. cmp.d 0x10000, $r0 ; Arbitrary, something above this code. @@ -232,12 +217,13 @@ _inflash: beq _dram_initialized nop -#include "../lib/dram_init.S" +#include "../mach/dram_init.S" _dram_initialized: ;; Copy the text and data section to DRAM. This depends on that the ;; variables used below are correctly set up by the linker script. ;; The calculated value stored in R4 is used below. + ;; Leave the cramfs file system (piggybacked after the kernel) in flash. moveq 0, $r0 ; Source. move.d text_start, $r1 ; Destination. move.d __vmlinux_end, $r2 @@ -249,7 +235,7 @@ _dram_initialized: blo 1b nop - ;; Keep CRAMFS in flash. + ;; Check for cramfs. moveq 0, $r0 move.d romfs_length, $r1 move.d $r0, [$r1] @@ -258,6 +244,7 @@ _dram_initialized: bne 1f nop + ;; Set length and start of cramfs, set romfs_in_flash flag addoq +4, $r4, $acr move.d [$acr], $r0 move.d romfs_length, $r1 @@ -273,35 +260,32 @@ _dram_initialized: nop _inram: - ;; Check if booting from NAND flash (in that case we just remember the offset - ;; into the flash where cramfs should be). - move.d REG_ADDR(config, regi_config, r_bootsel), $r0 - move.d [$r0], $r0 - and.d REG_MASK(config, r_bootsel, boot_mode), $r0 - cmp.d REG_STATE(config, r_bootsel, boot_mode, nand), $r0 - bne move_cramfs - moveq 1,$r0 - move.d crisv32_nand_boot, $r1 - move.d $r0, [$r1] - move.d crisv32_nand_cramfs_offset, $r1 - move.d $r9, [$r1] + ;; Check if booting from NAND flash; if so, set appropriate flags + ;; and move on. + cmp.d NAND_BOOT_MAGIC, $r12 + bne move_cramfs ; not nand, jump moveq 1, $r0 - move.d romfs_in_flash, $r1 + move.d nand_boot, $r1 ; tell axisflashmap we're booting from NAND + move.d $r0, [$r1] + moveq 0, $r0 ; tell axisflashmap romfs is not in + move.d romfs_in_flash, $r1 ; (directly accessed) flash move.d $r0, [$r1] - jump _start_it + jump _start_it ; continue with boot nop move_cramfs: - ;; Move the cramfs after BSS. + ;; kernel is in DRAM. + ;; Must figure out if there is a piggybacked rootfs image or not. + ;; Set romfs_length to 0 => no rootfs image available by default. moveq 0, $r0 move.d romfs_length, $r1 move.d $r0, [$r1] -#ifndef CONFIG_ETRAXFS_SIM +#ifndef CONFIG_ETRAX_VCS_SIM ;; The kernel could have been unpacked to DRAM by the loader, but - ;; the cramfs image could still be inte the flash immediately - ;; following the compressed kernel image. The loaded passes the address - ;; of the bute succeeding the last compressed byte in the flash in + ;; the cramfs image could still be in the flash immediately + ;; following the compressed kernel image. The loader passes the address + ;; of the byte succeeding the last compressed byte in the flash in ;; register R9 when starting the kernel. cmp.d 0x0ffffff8, $r9 bhs _no_romfs_in_flash ; R9 points outside the flash area. @@ -310,11 +294,13 @@ move_cramfs: ba _no_romfs_in_flash nop #endif + ;; cramfs rootfs might to be in flash. Check for it. move.d [$r9], $r0 ; cramfs_super.magic cmp.d CRAMFS_MAGIC, $r0 bne _no_romfs_in_flash nop + ;; found cramfs in flash. set address and size, and romfs_in_flash flag. addoq +4, $r9, $acr move.d [$acr], $r0 move.d romfs_length, $r1 @@ -330,27 +316,43 @@ move_cramfs: nop _no_romfs_in_flash: - ;; Look for cramfs. + ;; No romfs in flash, so look for cramfs, or jffs2 with jhead, + ;; after kernel in RAM, as is the case with network->RAM boot. + ;; For cramfs, partition starts with magic and length. + ;; For jffs2, a jhead is prepended which contains with magic and length. + ;; The jhead is not part of the jffs2 partition however. #ifndef CONFIG_ETRAXFS_SIM move.d __vmlinux_end, $r0 #else move.d __end, $r0 #endif move.d [$r0], $r1 - cmp.d CRAMFS_MAGIC, $r1 - bne 2f + cmp.d CRAMFS_MAGIC, $r1 ; cramfs magic? + beq 2f ; yes, jump + nop + cmp.d JHEAD_MAGIC, $r1 ; jffs2 (jhead) magic? + bne 4f ; no, skip copy nop + addq 4, $r0 ; location of jffs2 size + move.d [$r0+], $r2 ; fetch jffs2 size -> r2 + ; r0 now points to start of jffs2 + ba 3f + nop +2: + addoq +4, $r0, $acr ; location of cramfs size + move.d [$acr], $r2 ; fetch cramfs size -> r2 + ; r0 still points to start of cramfs +3: + ;; Now, move the root fs to after kernel's BSS - addoq +4, $r0, $acr - move.d [$acr], $r2 - move.d _end, $r1 + move.d _end, $r1 ; start of cramfs -> r1 move.d romfs_start, $r3 - move.d $r1, [$r3] + move.d $r1, [$r3] ; store at romfs_start (for axisflashmap) move.d romfs_length, $r3 - move.d $r2, [$r3] + move.d $r2, [$r3] ; store size at romfs_length -#ifndef CONFIG_ETRAXFS_SIM - add.d $r2, $r0 +#ifndef CONFIG_ETRAX_VCS_SIM + add.d $r2, $r0 ; copy from end and downwards add.d $r2, $r1 lsrq 1, $r2 ; Size is in bytes, we copy words. @@ -365,10 +367,17 @@ _no_romfs_in_flash: nop #endif -2: +4: + ;; BSS move done. + ;; Clear romfs_in_flash flag, as we now know romfs is in DRAM + ;; Also clear nand_boot flag; if we got here, we know we've not + ;; booted from NAND flash. moveq 0, $r0 move.d romfs_in_flash, $r1 move.d $r0, [$r1] + moveq 0, $r0 + move.d nand_boot, $r1 + move.d $r0, [$r1] jump _start_it ; Jump to cached code. nop @@ -384,8 +393,8 @@ _start_it: move.d cris_command_line, $r10 or.d 0x80000000, $r11 ; Make it virtual 1: - move.b [$r11+], $r12 - move.b $r12, [$r10+] + move.b [$r11+], $r1 + move.b $r1, [$r10+] subq 1, $r13 bne 1b nop @@ -401,7 +410,7 @@ no_command_line: move.d etrax_irv, $r1 ; Set the exception base register and pointer. move.d $r0, [$r1] -#ifndef CONFIG_ETRAXFS_SIM +#ifndef CONFIG_ETRAX_VCS_SIM ;; Clear the BSS region from _bss_start to _end. move.d __bss_start, $r0 move.d _end, $r1 @@ -411,7 +420,7 @@ no_command_line: nop #endif -#ifdef CONFIG_ETRAXFS_SIM +#ifdef CONFIG_ETRAX_VCS_SIM /* Set the watchdog timeout to something big. Will be removed when */ /* watchdog can be disabled with command line option */ move.d 0x7fffffff, $r10 @@ -423,25 +432,44 @@ no_command_line: move.d __bss_start, $r0 movem [$r0], $r13 +#ifdef CONFIG_ETRAX_L2CACHE + jsr l2cache_init + nop +#endif + jump start_kernel ; Jump to start_kernel() in init/main.c. nop .data etrax_irv: .dword 0 + +; Variables for communication with the Axis flash map driver (axisflashmap), +; and for setting up memory in arch/cris/kernel/setup.c . + +; romfs_start is set to the start of the root file system, if it exists +; in directly accessible memory (i.e. NOR Flash when booting from Flash, +; or RAM when booting directly from a network-downloaded RAM image) romfs_start: .dword 0 + +; romfs_length is set to the size of the root file system image, if it exists +; in directly accessible memory (see romfs_start). Otherwise it is set to 0. romfs_length: .dword 0 + +; romfs_in_flash is set to 1 if the root file system resides in directly +; accessible flash memory (i.e. NOR flash). It is set to 0 for RAM boot +; or NAND flash boot. romfs_in_flash: .dword 0 -crisv32_nand_boot: - .dword 0 -crisv32_nand_cramfs_offset: + +; nand_boot is set to 1 when the kernel has been booted from NAND flash +nand_boot: .dword 0 swapper_pg_dir = 0xc0002000 .section ".init.data", "aw" -#include "../lib/hw_settings.S" +#include "../mach/hw_settings.S" diff --git a/arch/cris/arch-v32/kernel/io.c b/arch/cris/arch-v32/kernel/io.c deleted file mode 100644 index a22a9e02e093..000000000000 --- a/arch/cris/arch-v32/kernel/io.c +++ /dev/null @@ -1,153 +0,0 @@ -/* - * Helper functions for I/O pins. - * - * Copyright (c) 2004 Axis Communications AB. - */ - -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/string.h> -#include <linux/ctype.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <asm/io.h> -#include <asm/arch/pinmux.h> -#include <asm/arch/hwregs/gio_defs.h> - -struct crisv32_ioport crisv32_ioports[] = -{ - { - (unsigned long*)REG_ADDR(gio, regi_gio, rw_pa_oe), - (unsigned long*)REG_ADDR(gio, regi_gio, rw_pa_dout), - (unsigned long*)REG_ADDR(gio, regi_gio, r_pa_din), - 8 - }, - { - (unsigned long*)REG_ADDR(gio, regi_gio, rw_pb_oe), - (unsigned long*)REG_ADDR(gio, regi_gio, rw_pb_dout), - (unsigned long*)REG_ADDR(gio, regi_gio, r_pb_din), - 18 - }, - { - (unsigned long*)REG_ADDR(gio, regi_gio, rw_pc_oe), - (unsigned long*)REG_ADDR(gio, regi_gio, rw_pc_dout), - (unsigned long*)REG_ADDR(gio, regi_gio, r_pc_din), - 18 - }, - { - (unsigned long*)REG_ADDR(gio, regi_gio, rw_pd_oe), - (unsigned long*)REG_ADDR(gio, regi_gio, rw_pd_dout), - (unsigned long*)REG_ADDR(gio, regi_gio, r_pd_din), - 18 - }, - { - (unsigned long*)REG_ADDR(gio, regi_gio, rw_pe_oe), - (unsigned long*)REG_ADDR(gio, regi_gio, rw_pe_dout), - (unsigned long*)REG_ADDR(gio, regi_gio, r_pe_din), - 18 - } -}; - -#define NBR_OF_PORTS ARRAY_SIZE(crisv32_ioports) - -struct crisv32_iopin crisv32_led1_green; -struct crisv32_iopin crisv32_led1_red; -struct crisv32_iopin crisv32_led2_green; -struct crisv32_iopin crisv32_led2_red; -struct crisv32_iopin crisv32_led3_green; -struct crisv32_iopin crisv32_led3_red; - -/* Dummy port used when green LED and red LED is on the same bit */ -static unsigned long io_dummy; -static struct crisv32_ioport dummy_port = -{ - &io_dummy, - &io_dummy, - &io_dummy, - 18 -}; -static struct crisv32_iopin dummy_led = -{ - &dummy_port, - 0 -}; - -static int __init crisv32_io_init(void) -{ - int ret = 0; - /* Initialize LEDs */ - ret += crisv32_io_get_name(&crisv32_led1_green, CONFIG_ETRAX_LED1G); - ret += crisv32_io_get_name(&crisv32_led1_red, CONFIG_ETRAX_LED1R); - ret += crisv32_io_get_name(&crisv32_led2_green, CONFIG_ETRAX_LED2G); - ret += crisv32_io_get_name(&crisv32_led2_red, CONFIG_ETRAX_LED2R); - ret += crisv32_io_get_name(&crisv32_led3_green, CONFIG_ETRAX_LED3G); - ret += crisv32_io_get_name(&crisv32_led3_red, CONFIG_ETRAX_LED3R); - crisv32_io_set_dir(&crisv32_led1_green, crisv32_io_dir_out); - crisv32_io_set_dir(&crisv32_led1_red, crisv32_io_dir_out); - crisv32_io_set_dir(&crisv32_led2_green, crisv32_io_dir_out); - crisv32_io_set_dir(&crisv32_led2_red, crisv32_io_dir_out); - crisv32_io_set_dir(&crisv32_led3_green, crisv32_io_dir_out); - crisv32_io_set_dir(&crisv32_led3_red, crisv32_io_dir_out); - - if (!strcmp(CONFIG_ETRAX_LED1G, CONFIG_ETRAX_LED1R)) - crisv32_led1_red = dummy_led; - if (!strcmp(CONFIG_ETRAX_LED2G, CONFIG_ETRAX_LED2R)) - crisv32_led2_red = dummy_led; - - return ret; -} - -__initcall(crisv32_io_init); - -int crisv32_io_get(struct crisv32_iopin* iopin, - unsigned int port, unsigned int pin) -{ - if (port > NBR_OF_PORTS) - return -EINVAL; - if (port > crisv32_ioports[port].pin_count) - return -EINVAL; - - iopin->bit = 1 << pin; - iopin->port = &crisv32_ioports[port]; - - if (crisv32_pinmux_alloc(port, pin, pin, pinmux_gpio)) - return -EIO; - - return 0; -} - -int crisv32_io_get_name(struct crisv32_iopin* iopin, - char* name) -{ - int port; - int pin; - - if (toupper(*name) == 'P') - name++; - - if (toupper(*name) < 'A' || toupper(*name) > 'E') - return -EINVAL; - - port = toupper(*name) - 'A'; - name++; - pin = simple_strtoul(name, NULL, 10); - - if (pin < 0 || pin > crisv32_ioports[port].pin_count) - return -EINVAL; - - iopin->bit = 1 << pin; - iopin->port = &crisv32_ioports[port]; - - if (crisv32_pinmux_alloc(port, pin, pin, pinmux_gpio)) - return -EIO; - - return 0; -} - -#ifdef CONFIG_PCI -/* PCI I/O access stuff */ -struct cris_io_operations* cris_iops = NULL; -EXPORT_SYMBOL(cris_iops); -#endif - diff --git a/arch/cris/arch-v32/kernel/irq.c b/arch/cris/arch-v32/kernel/irq.c index a9acaa270243..173c141ac9ba 100644 --- a/arch/cris/arch-v32/kernel/irq.c +++ b/arch/cris/arch-v32/kernel/irq.c @@ -15,15 +15,21 @@ #include <linux/threads.h> #include <linux/spinlock.h> #include <linux/kernel_stat.h> -#include <asm/arch/hwregs/reg_map.h> -#include <asm/arch/hwregs/reg_rdwr.h> -#include <asm/arch/hwregs/intr_vect.h> -#include <asm/arch/hwregs/intr_vect_defs.h> +#include <hwregs/reg_map.h> +#include <hwregs/reg_rdwr.h> +#include <hwregs/intr_vect.h> +#include <hwregs/intr_vect_defs.h> #define CPU_FIXED -1 /* IRQ masks (refer to comment for crisv32_do_multiple) */ -#define TIMER_MASK (1 << (TIMER_INTR_VECT - FIRST_IRQ)) +#if TIMER0_INTR_VECT - FIRST_IRQ < 32 +#define TIMER_MASK (1 << (TIMER0_INTR_VECT - FIRST_IRQ)) +#undef TIMER_VECT1 +#else +#define TIMER_MASK (1 << (TIMER0_INTR_VECT - FIRST_IRQ - 32)) +#define TIMER_VECT1 +#endif #ifdef CONFIG_ETRAX_KGDB #if defined(CONFIG_ETRAX_KGDB_PORT0) #define IGNOREMASK (1 << (SER0_INTR_VECT - FIRST_IRQ)) @@ -44,8 +50,8 @@ struct cris_irq_allocation cpumask_t mask; /* The CPUs to which the IRQ may be allocated. */ }; -struct cris_irq_allocation irq_allocations[NR_IRQS] = - {[0 ... NR_IRQS - 1] = {0, CPU_MASK_ALL}}; +struct cris_irq_allocation irq_allocations[NR_REAL_IRQS] = + { [0 ... NR_REAL_IRQS - 1] = {0, CPU_MASK_ALL} }; static unsigned long irq_regs[NR_CPUS] = { @@ -55,6 +61,12 @@ static unsigned long irq_regs[NR_CPUS] = #endif }; +#if NR_REAL_IRQS > 32 +#define NBR_REGS 2 +#else +#define NBR_REGS 1 +#endif + unsigned long cpu_irq_counters[NR_CPUS]; unsigned long irq_counters[NR_REAL_IRQS]; @@ -79,45 +91,81 @@ extern void d_mmu_write(void); extern void kgdb_init(void); extern void breakpoint(void); +/* From traps.c. */ +extern void breakh_BUG(void); + /* - * Build the IRQ handler stubs using macros from irq.h. First argument is the - * IRQ number, the second argument is the corresponding bit in - * intr_rw_vect_mask found in asm/arch/hwregs/intr_vect_defs.h. + * Build the IRQ handler stubs using macros from irq.h. */ -BUILD_IRQ(0x31, (1 << 0)) /* memarb */ -BUILD_IRQ(0x32, (1 << 1)) /* gen_io */ -BUILD_IRQ(0x33, (1 << 2)) /* iop0 */ -BUILD_IRQ(0x34, (1 << 3)) /* iop1 */ -BUILD_IRQ(0x35, (1 << 4)) /* iop2 */ -BUILD_IRQ(0x36, (1 << 5)) /* iop3 */ -BUILD_IRQ(0x37, (1 << 6)) /* dma0 */ -BUILD_IRQ(0x38, (1 << 7)) /* dma1 */ -BUILD_IRQ(0x39, (1 << 8)) /* dma2 */ -BUILD_IRQ(0x3a, (1 << 9)) /* dma3 */ -BUILD_IRQ(0x3b, (1 << 10)) /* dma4 */ -BUILD_IRQ(0x3c, (1 << 11)) /* dma5 */ -BUILD_IRQ(0x3d, (1 << 12)) /* dma6 */ -BUILD_IRQ(0x3e, (1 << 13)) /* dma7 */ -BUILD_IRQ(0x3f, (1 << 14)) /* dma8 */ -BUILD_IRQ(0x40, (1 << 15)) /* dma9 */ -BUILD_IRQ(0x41, (1 << 16)) /* ata */ -BUILD_IRQ(0x42, (1 << 17)) /* sser0 */ -BUILD_IRQ(0x43, (1 << 18)) /* sser1 */ -BUILD_IRQ(0x44, (1 << 19)) /* ser0 */ -BUILD_IRQ(0x45, (1 << 20)) /* ser1 */ -BUILD_IRQ(0x46, (1 << 21)) /* ser2 */ -BUILD_IRQ(0x47, (1 << 22)) /* ser3 */ -BUILD_IRQ(0x48, (1 << 23)) -BUILD_IRQ(0x49, (1 << 24)) /* eth0 */ -BUILD_IRQ(0x4a, (1 << 25)) /* eth1 */ -BUILD_TIMER_IRQ(0x4b, (1 << 26))/* timer */ -BUILD_IRQ(0x4c, (1 << 27)) /* bif_arb */ -BUILD_IRQ(0x4d, (1 << 28)) /* bif_dma */ -BUILD_IRQ(0x4e, (1 << 29)) /* ext */ -BUILD_IRQ(0x4f, (1 << 29)) /* ipi */ +BUILD_IRQ(0x31) +BUILD_IRQ(0x32) +BUILD_IRQ(0x33) +BUILD_IRQ(0x34) +BUILD_IRQ(0x35) +BUILD_IRQ(0x36) +BUILD_IRQ(0x37) +BUILD_IRQ(0x38) +BUILD_IRQ(0x39) +BUILD_IRQ(0x3a) +BUILD_IRQ(0x3b) +BUILD_IRQ(0x3c) +BUILD_IRQ(0x3d) +BUILD_IRQ(0x3e) +BUILD_IRQ(0x3f) +BUILD_IRQ(0x40) +BUILD_IRQ(0x41) +BUILD_IRQ(0x42) +BUILD_IRQ(0x43) +BUILD_IRQ(0x44) +BUILD_IRQ(0x45) +BUILD_IRQ(0x46) +BUILD_IRQ(0x47) +BUILD_IRQ(0x48) +BUILD_IRQ(0x49) +BUILD_IRQ(0x4a) +BUILD_IRQ(0x4b) +BUILD_IRQ(0x4c) +BUILD_IRQ(0x4d) +BUILD_IRQ(0x4e) +BUILD_IRQ(0x4f) +BUILD_IRQ(0x50) +#if MACH_IRQS > 32 +BUILD_IRQ(0x51) +BUILD_IRQ(0x52) +BUILD_IRQ(0x53) +BUILD_IRQ(0x54) +BUILD_IRQ(0x55) +BUILD_IRQ(0x56) +BUILD_IRQ(0x57) +BUILD_IRQ(0x58) +BUILD_IRQ(0x59) +BUILD_IRQ(0x5a) +BUILD_IRQ(0x5b) +BUILD_IRQ(0x5c) +BUILD_IRQ(0x5d) +BUILD_IRQ(0x5e) +BUILD_IRQ(0x5f) +BUILD_IRQ(0x60) +BUILD_IRQ(0x61) +BUILD_IRQ(0x62) +BUILD_IRQ(0x63) +BUILD_IRQ(0x64) +BUILD_IRQ(0x65) +BUILD_IRQ(0x66) +BUILD_IRQ(0x67) +BUILD_IRQ(0x68) +BUILD_IRQ(0x69) +BUILD_IRQ(0x6a) +BUILD_IRQ(0x6b) +BUILD_IRQ(0x6c) +BUILD_IRQ(0x6d) +BUILD_IRQ(0x6e) +BUILD_IRQ(0x6f) +BUILD_IRQ(0x70) +#endif /* Pointers to the low-level handlers. */ -static void (*interrupt[NR_IRQS])(void) = { +static void (*interrupt[MACH_IRQS])(void) = { IRQ0x31_interrupt, IRQ0x32_interrupt, IRQ0x33_interrupt, IRQ0x34_interrupt, IRQ0x35_interrupt, IRQ0x36_interrupt, IRQ0x37_interrupt, IRQ0x38_interrupt, IRQ0x39_interrupt, @@ -128,7 +176,20 @@ static void (*interrupt[NR_IRQS])(void) = { IRQ0x46_interrupt, IRQ0x47_interrupt, IRQ0x48_interrupt, IRQ0x49_interrupt, IRQ0x4a_interrupt, IRQ0x4b_interrupt, IRQ0x4c_interrupt, IRQ0x4d_interrupt, IRQ0x4e_interrupt, - IRQ0x4f_interrupt + IRQ0x4f_interrupt, IRQ0x50_interrupt, +#if MACH_IRQS > 32 + IRQ0x51_interrupt, IRQ0x52_interrupt, IRQ0x53_interrupt, + IRQ0x54_interrupt, IRQ0x55_interrupt, IRQ0x56_interrupt, + IRQ0x57_interrupt, IRQ0x58_interrupt, IRQ0x59_interrupt, + IRQ0x5a_interrupt, IRQ0x5b_interrupt, IRQ0x5c_interrupt, + IRQ0x5d_interrupt, IRQ0x5e_interrupt, IRQ0x5f_interrupt, + IRQ0x60_interrupt, IRQ0x61_interrupt, IRQ0x62_interrupt, + IRQ0x63_interrupt, IRQ0x64_interrupt, IRQ0x65_interrupt, + IRQ0x66_interrupt, IRQ0x67_interrupt, IRQ0x68_interrupt, + IRQ0x69_interrupt, IRQ0x6a_interrupt, IRQ0x6b_interrupt, + IRQ0x6c_interrupt, IRQ0x6d_interrupt, IRQ0x6e_interrupt, + IRQ0x6f_interrupt, IRQ0x70_interrupt, +#endif }; void @@ -137,13 +198,26 @@ block_irq(int irq, int cpu) int intr_mask; unsigned long flags; - spin_lock_irqsave(&irq_lock, flags); - intr_mask = REG_RD_INT(intr_vect, irq_regs[cpu], rw_mask); - - /* Remember; 1 let through, 0 block. */ - intr_mask &= ~(1 << (irq - FIRST_IRQ)); - - REG_WR_INT(intr_vect, irq_regs[cpu], rw_mask, intr_mask); + spin_lock_irqsave(&irq_lock, flags); + if (irq - FIRST_IRQ < 32) + intr_mask = REG_RD_INT_VECT(intr_vect, irq_regs[cpu], + rw_mask, 0); + else + intr_mask = REG_RD_INT_VECT(intr_vect, irq_regs[cpu], + rw_mask, 1); + + /* Remember; 1 let thru, 0 block. */ + if (irq - FIRST_IRQ < 32) + intr_mask &= ~(1 << (irq - FIRST_IRQ)); + else + intr_mask &= ~(1 << (irq - FIRST_IRQ - 32)); + + if (irq - FIRST_IRQ < 32) + REG_WR_INT_VECT(intr_vect, irq_regs[cpu], rw_mask, + 0, intr_mask); + else + REG_WR_INT_VECT(intr_vect, irq_regs[cpu], rw_mask, + 1, intr_mask); spin_unlock_irqrestore(&irq_lock, flags); } @@ -154,12 +228,26 @@ unblock_irq(int irq, int cpu) unsigned long flags; spin_lock_irqsave(&irq_lock, flags); - intr_mask = REG_RD_INT(intr_vect, irq_regs[cpu], rw_mask); - - /* Remember; 1 let through, 0 block. */ - intr_mask |= (1 << (irq - FIRST_IRQ)); + if (irq - FIRST_IRQ < 32) + intr_mask = REG_RD_INT_VECT(intr_vect, irq_regs[cpu], + rw_mask, 0); + else + intr_mask = REG_RD_INT_VECT(intr_vect, irq_regs[cpu], + rw_mask, 1); + + /* Remember; 1 let thru, 0 block. */ + if (irq - FIRST_IRQ < 32) + intr_mask |= (1 << (irq - FIRST_IRQ)); + else + intr_mask |= (1 << (irq - FIRST_IRQ - 32)); + + if (irq - FIRST_IRQ < 32) + REG_WR_INT_VECT(intr_vect, irq_regs[cpu], rw_mask, + 0, intr_mask); + else + REG_WR_INT_VECT(intr_vect, irq_regs[cpu], rw_mask, + 1, intr_mask); - REG_WR_INT(intr_vect, irq_regs[cpu], rw_mask, intr_mask); spin_unlock_irqrestore(&irq_lock, flags); } @@ -298,8 +386,9 @@ crisv32_do_multiple(struct pt_regs* regs) { int cpu; int mask; - int masked; + int masked[NBR_REGS]; int bit; + int i; cpu = smp_processor_id(); @@ -308,42 +397,59 @@ crisv32_do_multiple(struct pt_regs* regs) */ irq_enter(); - /* Get which IRQs that happened. */ - masked = REG_RD_INT(intr_vect, irq_regs[cpu], r_masked_vect); + for (i = 0; i < NBR_REGS; i++) { + /* Get which IRQs that happend. */ + masked[i] = REG_RD_INT_VECT(intr_vect, irq_regs[cpu], + r_masked_vect, i); - /* Calculate new IRQ mask with these IRQs disabled. */ - mask = REG_RD_INT(intr_vect, irq_regs[cpu], rw_mask); - mask &= ~masked; + /* Calculate new IRQ mask with these IRQs disabled. */ + mask = REG_RD_INT_VECT(intr_vect, irq_regs[cpu], rw_mask, i); + mask &= ~masked[i]; /* Timer IRQ is never masked */ - if (masked & TIMER_MASK) - mask |= TIMER_MASK; - - /* Block all the IRQs */ - REG_WR_INT(intr_vect, irq_regs[cpu], rw_mask, mask); +#ifdef TIMER_VECT1 + if ((i == 1) && (masked[0] & TIMER_MASK)) + mask |= TIMER_MASK; +#else + if ((i == 0) && (masked[0] & TIMER_MASK)) + mask |= TIMER_MASK; +#endif + /* Block all the IRQs */ + REG_WR_INT_VECT(intr_vect, irq_regs[cpu], rw_mask, i, mask); /* Check for timer IRQ and handle it special. */ - if (masked & TIMER_MASK) { - masked &= ~TIMER_MASK; - do_IRQ(TIMER_INTR_VECT, regs); +#ifdef TIMER_VECT1 + if ((i == 1) && (masked[i] & TIMER_MASK)) { + masked[i] &= ~TIMER_MASK; + do_IRQ(TIMER0_INTR_VECT, regs); + } +#else + if ((i == 0) && (masked[i] & TIMER_MASK)) { + masked[i] &= ~TIMER_MASK; + do_IRQ(TIMER0_INTR_VECT, regs); + } } +#endif #ifdef IGNORE_MASK /* Remove IRQs that can't be handled as multiple. */ - masked &= ~IGNORE_MASK; + masked[0] &= ~IGNORE_MASK; #endif /* Handle the rest of the IRQs. */ - for (bit = 0; bit < 32; bit++) - { - if (masked & (1 << bit)) - do_IRQ(bit + FIRST_IRQ, regs); + for (i = 0; i < NBR_REGS; i++) { + for (bit = 0; bit < 32; bit++) { + if (masked[i] & (1 << bit)) + do_IRQ(bit + FIRST_IRQ + i*32, regs); + } } /* Unblock all the IRQs. */ - mask = REG_RD_INT(intr_vect, irq_regs[cpu], rw_mask); - mask |= masked; - REG_WR_INT(intr_vect, irq_regs[cpu], rw_mask, mask); + for (i = 0; i < NBR_REGS; i++) { + mask = REG_RD_INT_VECT(intr_vect, irq_regs[cpu], rw_mask, i); + mask |= masked[i]; + REG_WR_INT_VECT(intr_vect, irq_regs[cpu], rw_mask, i, mask); + } /* This irq_exit() will trigger the soft IRQs. */ irq_exit(); @@ -361,20 +467,21 @@ init_IRQ(void) reg_intr_vect_rw_mask vect_mask = {0}; /* Clear all interrupts masks. */ - REG_WR(intr_vect, regi_irq, rw_mask, vect_mask); + for (i = 0; i < NBR_REGS; i++) + REG_WR_VECT(intr_vect, regi_irq, rw_mask, i, vect_mask); for (i = 0; i < 256; i++) etrax_irv->v[i] = weird_irq; - /* Point all IRQs to bad handlers. */ + /* Point all IRQ's to bad handlers. */ for (i = FIRST_IRQ, j = 0; j < NR_IRQS; i++, j++) { irq_desc[j].chip = &crisv32_irq_type; set_exception_vector(i, interrupt[j]); } /* Mark Timer and IPI IRQs as CPU local */ - irq_allocations[TIMER_INTR_VECT - FIRST_IRQ].cpu = CPU_FIXED; - irq_desc[TIMER_INTR_VECT].status |= IRQ_PER_CPU; + irq_allocations[TIMER0_INTR_VECT - FIRST_IRQ].cpu = CPU_FIXED; + irq_desc[TIMER0_INTR_VECT].status |= IRQ_PER_CPU; irq_allocations[IPI_INTR_VECT - FIRST_IRQ].cpu = CPU_FIXED; irq_desc[IPI_INTR_VECT].status |= IRQ_PER_CPU; @@ -391,6 +498,11 @@ init_IRQ(void) set_exception_vector(0x0a, d_mmu_access); set_exception_vector(0x0b, d_mmu_write); +#ifdef CONFIG_BUG + /* Break 14 handler, used to implement cheap BUG(). */ + set_exception_vector(0x1e, breakh_BUG); +#endif + /* The system-call trap is reached by "break 13". */ set_exception_vector(0x1d, system_call); diff --git a/arch/cris/arch-v32/kernel/kgdb.c b/arch/cris/arch-v32/kernel/kgdb.c index 480e56348be2..4e2e2e271efb 100644 --- a/arch/cris/arch-v32/kernel/kgdb.c +++ b/arch/cris/arch-v32/kernel/kgdb.c @@ -381,7 +381,7 @@ static int read_register(char regno, unsigned int *valptr); /* Serial port, reads one character. ETRAX 100 specific. from debugport.c */ int getDebugChar(void); -#ifdef CONFIG_ETRAXFS_SIM +#ifdef CONFIG_ETRAX_VCS_SIM int getDebugChar(void) { return socketread(); @@ -391,7 +391,7 @@ int getDebugChar(void) /* Serial port, writes one character. ETRAX 100 specific. from debugport.c */ void putDebugChar(int val); -#ifdef CONFIG_ETRAXFS_SIM +#ifdef CONFIG_ETRAX_VCS_SIM void putDebugChar(int val) { socketwrite((char *)&val, 1); @@ -1599,7 +1599,7 @@ kgdb_init(void) REG_WR(intr_vect, regi_irq, rw_mask, intr_mask); ser_intr_mask = REG_RD(ser, regi_ser0, rw_intr_mask); - ser_intr_mask.data_avail = regk_ser_yes; + ser_intr_mask.dav = regk_ser_yes; REG_WR(ser, regi_ser0, rw_intr_mask, ser_intr_mask); #elif defined(CONFIG_ETRAX_KGDB_PORT1) /* Note: no shortcut registered (not handled by multiple_interrupt). @@ -1611,7 +1611,7 @@ kgdb_init(void) REG_WR(intr_vect, regi_irq, rw_mask, intr_mask); ser_intr_mask = REG_RD(ser, regi_ser1, rw_intr_mask); - ser_intr_mask.data_avail = regk_ser_yes; + ser_intr_mask.dav = regk_ser_yes; REG_WR(ser, regi_ser1, rw_intr_mask, ser_intr_mask); #elif defined(CONFIG_ETRAX_KGDB_PORT2) /* Note: no shortcut registered (not handled by multiple_interrupt). @@ -1623,7 +1623,7 @@ kgdb_init(void) REG_WR(intr_vect, regi_irq, rw_mask, intr_mask); ser_intr_mask = REG_RD(ser, regi_ser2, rw_intr_mask); - ser_intr_mask.data_avail = regk_ser_yes; + ser_intr_mask.dav = regk_ser_yes; REG_WR(ser, regi_ser2, rw_intr_mask, ser_intr_mask); #elif defined(CONFIG_ETRAX_KGDB_PORT3) /* Note: no shortcut registered (not handled by multiple_interrupt). @@ -1635,7 +1635,7 @@ kgdb_init(void) REG_WR(intr_vect, regi_irq, rw_mask, intr_mask); ser_intr_mask = REG_RD(ser, regi_ser3, rw_intr_mask); - ser_intr_mask.data_avail = regk_ser_yes; + ser_intr_mask.dav = regk_ser_yes; REG_WR(ser, regi_ser3, rw_intr_mask, ser_intr_mask); #endif diff --git a/arch/cris/arch-v32/kernel/process.c b/arch/cris/arch-v32/kernel/process.c index b72a15580dc7..ced5b725d9bd 100644 --- a/arch/cris/arch-v32/kernel/process.c +++ b/arch/cris/arch-v32/kernel/process.c @@ -12,17 +12,13 @@ #include <linux/err.h> #include <linux/fs.h> #include <linux/slab.h> -#include <asm/arch/hwregs/reg_rdwr.h> -#include <asm/arch/hwregs/reg_map.h> -#include <asm/arch/hwregs/timer_defs.h> -#include <asm/arch/hwregs/intr_vect_defs.h> +#include <hwregs/reg_rdwr.h> +#include <hwregs/reg_map.h> +#include <hwregs/timer_defs.h> +#include <hwregs/intr_vect_defs.h> extern void stop_watchdog(void); -#ifdef CONFIG_ETRAX_GPIO -extern void etrax_gpio_wake_up_check(void); /* Defined in drivers/gpio.c. */ -#endif - extern int cris_hlt_counter; /* We use this if we don't have any better idle routine. */ @@ -82,7 +78,7 @@ hard_reset_now(void) wd_ctrl.cmd = regk_timer_start; arch_enable_nmi(); - REG_WR(timer, regi_timer, rw_wd_ctrl, wd_ctrl); + REG_WR(timer, regi_timer0, rw_wd_ctrl, wd_ctrl); } #endif diff --git a/arch/cris/arch-v32/kernel/ptrace.c b/arch/cris/arch-v32/kernel/ptrace.c index 2df60529a8af..e27f4670e88e 100644 --- a/arch/cris/arch-v32/kernel/ptrace.c +++ b/arch/cris/arch-v32/kernel/ptrace.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2000-2003, Axis Communications AB. + * Copyright (C) 2000-2007, Axis Communications AB. */ #include <linux/kernel.h> @@ -149,7 +149,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) ret = generic_ptrace_pokedata(child, addr, data); break; - /* Write the word at location address in the USER area. */ + /* Write the word at location address in the USER area. */ case PTRACE_POKEUSR: ret = -EIO; if ((addr & 3) || addr < 0 || addr > PT_MAX << 2) @@ -201,7 +201,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) break; - /* Make the child exit by sending it a sigkill. */ + /* Make the child exit by sending it a sigkill. */ case PTRACE_KILL: ret = 0; @@ -245,9 +245,10 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) break; } + /* Get all GP registers from the child. */ case PTRACE_GETREGS: { - int i; + int i; unsigned long tmp; for (i = 0; i <= PT_MAX; i++) { @@ -294,6 +295,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) break; } +out_tsk: return ret; } diff --git a/arch/cris/arch-v32/kernel/signal.c b/arch/cris/arch-v32/kernel/signal.c index 024cc6901974..58c1866804e3 100644 --- a/arch/cris/arch-v32/kernel/signal.c +++ b/arch/cris/arch-v32/kernel/signal.c @@ -50,7 +50,7 @@ struct rt_signal_frame { unsigned char retcode[8]; /* Trampoline code. */ }; -int do_signal(int restart, sigset_t *oldset, struct pt_regs *regs); +void do_signal(int restart, struct pt_regs *regs); void keep_debug_flags(unsigned long oldccs, unsigned long oldspc, struct pt_regs *regs); /* @@ -61,74 +61,16 @@ int sys_sigsuspend(old_sigset_t mask, long r11, long r12, long r13, long mof, long srp, struct pt_regs *regs) { - sigset_t saveset; - mask &= _BLOCKABLE; - spin_lock_irq(¤t->sighand->siglock); - - saveset = current->blocked; - + current->saved_sigmask = current->blocked; siginitset(¤t->blocked, mask); - - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - - regs->r10 = -EINTR; - - while (1) { - current->state = TASK_INTERRUPTIBLE; - schedule(); - - if (do_signal(0, &saveset, regs)) { - /* - * This point is reached twice: once to call - * the signal handler, then again to return - * from the sigsuspend system call. When - * calling the signal handler, R10 hold the - * signal number as set by do_signal(). The - * sigsuspend call will always return with - * the restored value above; -EINTR. - */ - return regs->r10; - } - } -} - -/* Define some dummy arguments to be able to reach the regs argument. */ -int -sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize, long r12, long r13, - long mof, long srp, struct pt_regs *regs) -{ - sigset_t saveset; - sigset_t newset; - - if (sigsetsize != sizeof(sigset_t)) - return -EINVAL; - - if (copy_from_user(&newset, unewset, sizeof(newset))) - return -EFAULT; - - sigdelsetmask(&newset, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - - saveset = current->blocked; - current->blocked = newset; - recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); - - regs->r10 = -EINTR; - - while (1) { - current->state = TASK_INTERRUPTIBLE; - schedule(); - - if (do_signal(0, &saveset, regs)) { - /* See comment in function above. */ - return regs->r10; - } - } + current->state = TASK_INTERRUPTIBLE; + schedule(); + set_thread_flag(TIF_RESTORE_SIGMASK); + return -ERESTARTNOHAND; } int @@ -290,7 +232,7 @@ sys_rt_sigreturn(long r10, long r11, long r12, long r13, long mof, long srp, goto badframe; if (do_sigaltstack(&frame->uc.uc_stack, NULL, rdusp()) == -EFAULT) - goto badframe; + goto badframe; keep_debug_flags(oldccs, oldspc, regs); @@ -347,11 +289,11 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size) /* Grab and setup a signal frame. * * Basically a lot of state-info is stacked, and arranged for the - * user-mode program to return to the kernel using either a trampoline + * user-mode program to return to the kernel using either a trampiline * which performs the syscall sigreturn(), or a provided user-mode * trampoline. */ -static void +static int setup_frame(int sig, struct k_sigaction *ka, sigset_t *set, struct pt_regs * regs) { @@ -417,16 +359,17 @@ setup_frame(int sig, struct k_sigaction *ka, sigset_t *set, /* Actually move the USP to reflect the stacked frame. */ wrusp((unsigned long)frame); - return; + return 0; give_sigsegv: if (sig == SIGSEGV) ka->sa.sa_handler = SIG_DFL; force_sig(SIGSEGV, current); + return -EFAULT; } -static void +static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *set, struct pt_regs * regs) { @@ -503,21 +446,24 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, /* Actually move the usp to reflect the stacked frame. */ wrusp((unsigned long)frame); - return; + return 0; give_sigsegv: if (sig == SIGSEGV) ka->sa.sa_handler = SIG_DFL; force_sig(SIGSEGV, current); + return -EFAULT; } /* Invoke a singal handler to, well, handle the signal. */ -static inline void +static inline int handle_signal(int canrestart, unsigned long sig, siginfo_t *info, struct k_sigaction *ka, sigset_t *oldset, struct pt_regs * regs) { + int ret; + /* Check if this got called from a system call. */ if (canrestart) { /* If so, check system call restarting. */ @@ -561,19 +507,24 @@ handle_signal(int canrestart, unsigned long sig, /* Set up the stack frame. */ if (ka->sa.sa_flags & SA_SIGINFO) - setup_rt_frame(sig, ka, info, oldset, regs); + ret = setup_rt_frame(sig, ka, info, oldset, regs); else - setup_frame(sig, ka, oldset, regs); + ret = setup_frame(sig, ka, oldset, regs); if (ka->sa.sa_flags & SA_ONESHOT) ka->sa.sa_handler = SIG_DFL; - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); - if (!(ka->sa.sa_flags & SA_NODEFER)) - sigaddset(¤t->blocked,sig); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + if (ret == 0) { + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked, ¤t->blocked, + &ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NODEFER)) + sigaddset(¤t->blocked, sig); + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + } + + return ret; } /* @@ -587,12 +538,13 @@ handle_signal(int canrestart, unsigned long sig, * we can use user_mode(regs) to see if we came directly from kernel or user * mode below. */ -int -do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs) +void +do_signal(int canrestart, struct pt_regs *regs) { int signr; siginfo_t info; struct k_sigaction ka; + sigset_t *oldset; /* * The common case should go fast, which is why this point is @@ -600,17 +552,28 @@ do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs) * without doing anything. */ if (!user_mode(regs)) - return 1; + return; - if (!oldset) + if (test_thread_flag(TIF_RESTORE_SIGMASK)) + oldset = ¤t->saved_sigmask; + else oldset = ¤t->blocked; signr = get_signal_to_deliver(&info, &ka, regs, NULL); if (signr > 0) { - /* Deliver the signal. */ - handle_signal(canrestart, signr, &info, &ka, oldset, regs); - return 1; + /* Whee! Actually deliver the signal. */ + if (handle_signal(canrestart, signr, &info, &ka, + oldset, regs)) { + /* a signal was successfully delivered; the saved + * sigmask will have been stored in the signal frame, + * and will be restored by sigreturn, so we can simply + * clear the TIF_RESTORE_SIGMASK flag */ + if (test_thread_flag(TIF_RESTORE_SIGMASK)) + clear_thread_flag(TIF_RESTORE_SIGMASK); + } + + return; } /* Got here from a system call? */ @@ -628,7 +591,12 @@ do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs) } } - return 0; + /* if there's no signal to deliver, we just put the saved sigmask + * back */ + if (test_thread_flag(TIF_RESTORE_SIGMASK)) { + clear_thread_flag(TIF_RESTORE_SIGMASK); + sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); + } } asmlinkage void @@ -641,7 +609,7 @@ ugdb_trap_user(struct thread_info *ti, int sig) user_regs(ti)->spc = 0; } /* FIXME: Filter out false h/w breakpoint hits (i.e. EDA - not within any configured h/w breakpoint range). Synchronize with + not withing any configured h/w breakpoint range). Synchronize with what already exists for kernel debugging. */ if (((user_regs(ti)->exs & 0xff00) >> 8) == BREAK_8_INTR_VECT) { /* Break 8: subtract 2 from ERP unless in a delay slot. */ diff --git a/arch/cris/arch-v32/kernel/smp.c b/arch/cris/arch-v32/kernel/smp.c index 171c96e0a5d3..a9c3334e46c9 100644 --- a/arch/cris/arch-v32/kernel/smp.c +++ b/arch/cris/arch-v32/kernel/smp.c @@ -1,11 +1,12 @@ +#include <linux/types.h> #include <asm/delay.h> -#include <asm/arch/irq.h> -#include <asm/arch/hwregs/intr_vect.h> -#include <asm/arch/hwregs/intr_vect_defs.h> +#include <irq.h> +#include <hwregs/intr_vect.h> +#include <hwregs/intr_vect_defs.h> #include <asm/tlbflush.h> #include <asm/mmu_context.h> -#include <asm/arch/hwregs/mmu_defs_asm.h> -#include <asm/arch/hwregs/supp_reg.h> +#include <hwregs/asm/mmu_defs_asm.h> +#include <hwregs/supp_reg.h> #include <asm/atomic.h> #include <linux/err.h> @@ -20,6 +21,7 @@ #define IPI_SCHEDULE 1 #define IPI_CALL 2 #define IPI_FLUSH_TLB 4 +#define IPI_BOOT 8 #define FLUSH_ALL (void*)0xffffffff @@ -30,6 +32,8 @@ spinlock_t cris_atomic_locks[] = { [0 ... LOCK_COUNT - 1] = SPIN_LOCK_UNLOCKED}; cpumask_t cpu_online_map = CPU_MASK_NONE; EXPORT_SYMBOL(cpu_online_map); cpumask_t phys_cpu_present_map = CPU_MASK_NONE; +cpumask_t cpu_possible_map; +EXPORT_SYMBOL(cpu_possible_map); EXPORT_SYMBOL(phys_cpu_present_map); /* Variables used during SMP boot */ @@ -55,13 +59,12 @@ static unsigned long flush_addr; extern int setup_irq(int, struct irqaction *); /* Mode registers */ -static unsigned long irq_regs[NR_CPUS] = -{ +static unsigned long irq_regs[NR_CPUS] = { regi_irq, regi_irq2 }; -static irqreturn_t crisv32_ipi_interrupt(int irq, void *dev_id, struct pt_regs *regs); +static irqreturn_t crisv32_ipi_interrupt(int irq, void *dev_id); static int send_ipi(int vector, int wait, cpumask_t cpu_mask); static struct irqaction irq_ipi = { .handler = crisv32_ipi_interrupt, @@ -101,6 +104,7 @@ void __devinit smp_prepare_boot_cpu(void) cpu_set(0, cpu_online_map); cpu_set(0, phys_cpu_present_map); + cpu_set(0, cpu_possible_map); } void __init smp_cpus_done(unsigned int max_cpus) @@ -113,6 +117,7 @@ smp_boot_one_cpu(int cpuid) { unsigned timeout; struct task_struct *idle; + cpumask_t cpu_mask = CPU_MASK_NONE; idle = fork_idle(cpuid); if (IS_ERR(idle)) @@ -124,6 +129,12 @@ smp_boot_one_cpu(int cpuid) smp_init_current_idle_thread = task_thread_info(idle); cpu_now_booting = cpuid; + /* Kick it */ + cpu_set(cpuid, cpu_online_map); + cpu_set(cpuid, cpu_mask); + send_ipi(IPI_BOOT, 0, cpu_mask); + cpu_clear(cpuid, cpu_online_map); + /* Wait for CPU to come online */ for (timeout = 0; timeout < 10000; timeout++) { if(cpu_online(cpuid)) { @@ -165,7 +176,7 @@ void __init smp_callin(void) /* Enable IRQ and idle */ REG_WR(intr_vect, irq_regs[cpu], rw_mask, vect_mask); unmask_irq(IPI_INTR_VECT); - unmask_irq(TIMER_INTR_VECT); + unmask_irq(TIMER0_INTR_VECT); preempt_disable(); local_irq_enable(); @@ -328,7 +339,7 @@ int smp_call_function(void (*func)(void *info), void *info, return ret; } -irqreturn_t crisv32_ipi_interrupt(int irq, void *dev_id, struct pt_regs *regs) +irqreturn_t crisv32_ipi_interrupt(int irq, void *dev_id) { void (*func) (void *info) = call_data->func; void *info = call_data->info; diff --git a/arch/cris/arch-v32/kernel/time.c b/arch/cris/arch-v32/kernel/time.c index 2f7e8e200f2c..3a13dd6e0a9a 100644 --- a/arch/cris/arch-v32/kernel/time.c +++ b/arch/cris/arch-v32/kernel/time.c @@ -1,8 +1,7 @@ -/* $Id: time.c,v 1.19 2005/04/29 05:40:09 starvik Exp $ - * +/* * linux/arch/cris/arch-v32/kernel/time.c * - * Copyright (C) 2003 Axis Communications AB + * Copyright (C) 2003-2007 Axis Communications AB * */ @@ -14,28 +13,34 @@ #include <linux/sched.h> #include <linux/init.h> #include <linux/threads.h> +#include <linux/cpufreq.h> #include <asm/types.h> #include <asm/signal.h> #include <asm/io.h> #include <asm/delay.h> #include <asm/rtc.h> #include <asm/irq.h> - -#include <asm/arch/hwregs/reg_map.h> -#include <asm/arch/hwregs/reg_rdwr.h> -#include <asm/arch/hwregs/timer_defs.h> -#include <asm/arch/hwregs/intr_vect_defs.h> +#include <asm/irq_regs.h> + +#include <hwregs/reg_map.h> +#include <hwregs/reg_rdwr.h> +#include <hwregs/timer_defs.h> +#include <hwregs/intr_vect_defs.h> +#ifdef CONFIG_CRIS_MACH_ARTPEC3 +#include <hwregs/clkgen_defs.h> +#endif /* Watchdog defines */ -#define ETRAX_WD_KEY_MASK 0x7F /* key is 7 bit */ -#define ETRAX_WD_HZ 763 /* watchdog counts at 763 Hz */ -#define ETRAX_WD_CNT ((2*ETRAX_WD_HZ)/HZ + 1) /* Number of 763 counts before watchdog bites */ +#define ETRAX_WD_KEY_MASK 0x7F /* key is 7 bit */ +#define ETRAX_WD_HZ 763 /* watchdog counts at 763 Hz */ +/* Number of 763 counts before watchdog bites */ +#define ETRAX_WD_CNT ((2*ETRAX_WD_HZ)/HZ + 1) unsigned long timer_regs[NR_CPUS] = { - regi_timer, + regi_timer0, #ifdef CONFIG_SMP - regi_timer2 + regi_timer2 #endif }; @@ -44,12 +49,22 @@ extern int set_rtc_mmss(unsigned long nowtime); extern int setup_irq(int, struct irqaction *); extern int have_rtc; +#ifdef CONFIG_CPU_FREQ +static int +cris_time_freq_notifier(struct notifier_block *nb, unsigned long val, + void *data); + +static struct notifier_block cris_time_freq_notifier_block = { + .notifier_call = cris_time_freq_notifier, +}; +#endif + unsigned long get_ns_in_jiffie(void) { reg_timer_r_tmr0_data data; unsigned long ns; - data = REG_RD(timer, regi_timer, r_tmr0_data); + data = REG_RD(timer, regi_timer0, r_tmr0_data); ns = (TIMER0_DIV - data) * 10; return ns; } @@ -59,31 +74,27 @@ unsigned long do_slow_gettimeoffset(void) unsigned long count; unsigned long usec_count = 0; - static unsigned long count_p = TIMER0_DIV;/* for the first call after boot */ + /* For the first call after boot */ + static unsigned long count_p = TIMER0_DIV; static unsigned long jiffies_p = 0; - /* - * cache volatile jiffies temporarily; we have IRQs turned off. - */ + /* Cache volatile jiffies temporarily; we have IRQs turned off. */ unsigned long jiffies_t; /* The timer interrupt comes from Etrax timer 0. In order to get * better precision, we check the current value. It might have - * underflowed already though. - */ + * underflowed already though. */ + count = REG_RD(timer, regi_timer0, r_tmr0_data); + jiffies_t = jiffies; - count = REG_RD(timer, regi_timer, r_tmr0_data); - jiffies_t = jiffies; - - /* - * avoiding timer inconsistencies (they are rare, but they happen)... - * there are one problem that must be avoided here: - * 1. the timer counter underflows + /* Avoiding timer inconsistencies (they are rare, but they happen) + * There is one problem that must be avoided here: + * 1. the timer counter underflows */ if( jiffies_t == jiffies_p ) { if( count > count_p ) { - /* Timer wrapped, use new count and prescale - * increase the time corresponding to one jiffie + /* Timer wrapped, use new count and prescale. + * Increase the time corresponding to one jiffy. */ usec_count = 1000000/HZ; } @@ -106,17 +117,15 @@ unsigned long do_slow_gettimeoffset(void) */ /* This gives us 1.3 ms to do something useful when the NMI comes */ -/* right now, starting the watchdog is the same as resetting it */ +/* Right now, starting the watchdog is the same as resetting it */ #define start_watchdog reset_watchdog #if defined(CONFIG_ETRAX_WATCHDOG) static short int watchdog_key = 42; /* arbitrary 7 bit number */ #endif -/* number of pages to consider "out of memory". it is normal that the memory - * is used though, so put this really low. - */ - +/* Number of pages to consider "out of memory". It is normal that the memory + * is used though, so set this really low. */ #define WATCHDOG_MIN_FREE_PAGES 8 void @@ -125,14 +134,15 @@ reset_watchdog(void) #if defined(CONFIG_ETRAX_WATCHDOG) reg_timer_rw_wd_ctrl wd_ctrl = { 0 }; - /* only keep watchdog happy as long as we have memory left! */ + /* Only keep watchdog happy as long as we have memory left! */ if(nr_free_pages() > WATCHDOG_MIN_FREE_PAGES) { - /* reset the watchdog with the inverse of the old key */ - watchdog_key ^= ETRAX_WD_KEY_MASK; /* invert key, which is 7 bits */ + /* Reset the watchdog with the inverse of the old key */ + /* Invert key, which is 7 bits */ + watchdog_key ^= ETRAX_WD_KEY_MASK; wd_ctrl.cnt = ETRAX_WD_CNT; wd_ctrl.cmd = regk_timer_start; wd_ctrl.key = watchdog_key; - REG_WR(timer, regi_timer, rw_wd_ctrl, wd_ctrl); + REG_WR(timer, regi_timer0, rw_wd_ctrl, wd_ctrl); } #endif } @@ -148,7 +158,7 @@ stop_watchdog(void) wd_ctrl.cnt = ETRAX_WD_CNT; wd_ctrl.cmd = regk_timer_stop; wd_ctrl.key = watchdog_key; - REG_WR(timer, regi_timer, rw_wd_ctrl, wd_ctrl); + REG_WR(timer, regi_timer0, rw_wd_ctrl, wd_ctrl); #endif } @@ -160,17 +170,28 @@ handle_watchdog_bite(struct pt_regs* regs) #if defined(CONFIG_ETRAX_WATCHDOG) extern int cause_of_death; - raw_printk("Watchdog bite\n"); + oops_in_progress = 1; + printk(KERN_WARNING "Watchdog bite\n"); /* Check if forced restart or unexpected watchdog */ if (cause_of_death == 0xbedead) { +#ifdef CONFIG_CRIS_MACH_ARTPEC3 + /* There is a bug in Artpec-3 (voodoo TR 78) that requires + * us to go to lower frequency for the reset to be reliable + */ + reg_clkgen_rw_clk_ctrl ctrl = + REG_RD(clkgen, regi_clkgen, rw_clk_ctrl); + ctrl.pll = 0; + REG_WR(clkgen, regi_clkgen, rw_clk_ctrl, ctrl); +#endif while(1); } - /* Unexpected watchdog, stop the watchdog and dump registers*/ + /* Unexpected watchdog, stop the watchdog and dump registers. */ stop_watchdog(); - raw_printk("Oops: bitten by watchdog\n"); - show_registers(regs); + printk(KERN_WARNING "Oops: bitten by watchdog\n"); + show_registers(regs); + oops_in_progress = 0; #ifndef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY reset_watchdog(); #endif @@ -178,21 +199,19 @@ handle_watchdog_bite(struct pt_regs* regs) #endif } -/* last time the cmos clock got updated */ +/* Last time the cmos clock got updated. */ static long last_rtc_update = 0; /* * timer_interrupt() needs to keep up the real-time clock, - * as well as call the "do_timer()" routine every clocktick + * as well as call the "do_timer()" routine every clocktick. */ - -//static unsigned short myjiff; /* used by our debug routine print_timestamp */ - extern void cris_do_profile(struct pt_regs *regs); static inline irqreturn_t -timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +timer_interrupt(int irq, void *dev_id) { + struct pt_regs *regs = get_irq_regs(); int cpu = smp_processor_id(); reg_timer_r_masked_intr masked_intr; reg_timer_rw_ack_intr ack_intr = { 0 }; @@ -202,11 +221,11 @@ timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) if (!masked_intr.tmr0) return IRQ_NONE; - /* acknowledge the timer irq */ + /* Acknowledge the timer irq. */ ack_intr.tmr0 = 1; REG_WR(timer, timer_regs[cpu], rw_ack_intr, ack_intr); - /* reset watchdog otherwise it resets us! */ + /* Reset watchdog otherwise it resets us! */ reset_watchdog(); /* Update statistics. */ @@ -218,7 +237,7 @@ timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) if (cpu != 0) return IRQ_HANDLED; - /* call the real timer interrupt handler */ + /* Call the real timer interrupt handler */ do_timer(1); /* @@ -236,17 +255,17 @@ timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) if (set_rtc_mmss(xtime.tv_sec) == 0) last_rtc_update = xtime.tv_sec; else - last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */ + /* Do it again in 60 s */ + last_rtc_update = xtime.tv_sec - 600; } return IRQ_HANDLED; } -/* timer is IRQF_SHARED so drivers can add stuff to the timer irq chain - * it needs to be IRQF_DISABLED to make the jiffies update work properly +/* Timer is IRQF_SHARED so drivers can add stuff to the timer irq chain. + * It needs to be IRQF_DISABLED to make the jiffies update work properly. */ - -static struct irqaction irq_timer = { - .mask = timer_interrupt, +static struct irqaction irq_timer = { + .handler = timer_interrupt, .flags = IRQF_SHARED | IRQF_DISABLED, .mask = CPU_MASK_NONE, .name = "timer" @@ -256,27 +275,27 @@ void __init cris_timer_init(void) { int cpu = smp_processor_id(); - reg_timer_rw_tmr0_ctrl tmr0_ctrl = { 0 }; - reg_timer_rw_tmr0_div tmr0_div = TIMER0_DIV; + reg_timer_rw_tmr0_ctrl tmr0_ctrl = { 0 }; + reg_timer_rw_tmr0_div tmr0_div = TIMER0_DIV; reg_timer_rw_intr_mask timer_intr_mask; - /* Setup the etrax timers + /* Setup the etrax timers. * Base frequency is 100MHz, divider 1000000 -> 100 HZ * We use timer0, so timer1 is free. * The trig timer is used by the fasttimer API if enabled. */ - tmr0_ctrl.op = regk_timer_ld; + tmr0_ctrl.op = regk_timer_ld; tmr0_ctrl.freq = regk_timer_f100; - REG_WR(timer, timer_regs[cpu], rw_tmr0_div, tmr0_div); - REG_WR(timer, timer_regs[cpu], rw_tmr0_ctrl, tmr0_ctrl); /* Load */ - tmr0_ctrl.op = regk_timer_run; - REG_WR(timer, timer_regs[cpu], rw_tmr0_ctrl, tmr0_ctrl); /* Start */ - - /* enable the timer irq */ - timer_intr_mask = REG_RD(timer, timer_regs[cpu], rw_intr_mask); - timer_intr_mask.tmr0 = 1; - REG_WR(timer, timer_regs[cpu], rw_intr_mask, timer_intr_mask); + REG_WR(timer, timer_regs[cpu], rw_tmr0_div, tmr0_div); + REG_WR(timer, timer_regs[cpu], rw_tmr0_ctrl, tmr0_ctrl); /* Load */ + tmr0_ctrl.op = regk_timer_run; + REG_WR(timer, timer_regs[cpu], rw_tmr0_ctrl, tmr0_ctrl); /* Start */ + + /* Enable the timer irq. */ + timer_intr_mask = REG_RD(timer, timer_regs[cpu], rw_intr_mask); + timer_intr_mask.tmr0 = 1; + REG_WR(timer, timer_regs[cpu], rw_intr_mask, timer_intr_mask); } void __init @@ -284,7 +303,7 @@ time_init(void) { reg_intr_vect_rw_mask intr_mask; - /* probe for the RTC and read it if it exists + /* Probe for the RTC and read it if it exists. * Before the RTC can be probed the loops_per_usec variable needs * to be initialized to make usleep work. A better value for * loops_per_usec is calculated by the kernel later once the @@ -293,52 +312,74 @@ time_init(void) loops_per_usec = 50; if(RTC_INIT() < 0) { - /* no RTC, start at 1980 */ + /* No RTC, start at 1980 */ xtime.tv_sec = 0; xtime.tv_nsec = 0; have_rtc = 0; } else { - /* get the current time */ + /* Get the current time */ have_rtc = 1; update_xtime_from_cmos(); } /* - * Initialize wall_to_monotonic such that adding it to xtime will yield zero, the - * tv_nsec field must be normalized (i.e., 0 <= nsec < NSEC_PER_SEC). + * Initialize wall_to_monotonic such that adding it to + * xtime will yield zero, the tv_nsec field must be normalized + * (i.e., 0 <= nsec < NSEC_PER_SEC). */ set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec); - /* Start CPU local timer */ + /* Start CPU local timer. */ cris_timer_init(); - /* enable the timer irq in global config */ - intr_mask = REG_RD(intr_vect, regi_irq, rw_mask); - intr_mask.timer = 1; - REG_WR(intr_vect, regi_irq, rw_mask, intr_mask); - - /* now actually register the timer irq handler that calls timer_interrupt() */ + /* Enable the timer irq in global config. */ + intr_mask = REG_RD_VECT(intr_vect, regi_irq, rw_mask, 1); + intr_mask.timer0 = 1; + REG_WR_VECT(intr_vect, regi_irq, rw_mask, 1, intr_mask); - setup_irq(TIMER_INTR_VECT, &irq_timer); + /* Now actually register the timer irq handler that calls + * timer_interrupt(). */ + setup_irq(TIMER0_INTR_VECT, &irq_timer); - /* enable watchdog if we should use one */ + /* Enable watchdog if we should use one. */ #if defined(CONFIG_ETRAX_WATCHDOG) - printk("Enabling watchdog...\n"); + printk(KERN_INFO "Enabling watchdog...\n"); start_watchdog(); /* If we use the hardware watchdog, we want to trap it as an NMI - and dump registers before it resets us. For this to happen, we - must set the "m" NMI enable flag (which once set, is unset only - when an NMI is taken). - - The same goes for the external NMI, but that doesn't have any - driver or infrastructure support yet. */ - { - unsigned long flags; - local_save_flags(flags); - flags |= (1<<30); /* NMI M flag is at bit 30 */ - local_irq_restore(flags); - } + * and dump registers before it resets us. For this to happen, we + * must set the "m" NMI enable flag (which once set, is unset only + * when an NMI is taken). */ + { + unsigned long flags; + local_save_flags(flags); + flags |= (1<<30); /* NMI M flag is at bit 30 */ + local_irq_restore(flags); + } +#endif + +#ifdef CONFIG_CPU_FREQ + cpufreq_register_notifier(&cris_time_freq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); #endif } + +#ifdef CONFIG_CPU_FREQ +static int +cris_time_freq_notifier(struct notifier_block *nb, unsigned long val, + void *data) +{ + struct cpufreq_freqs *freqs = data; + if (val == CPUFREQ_POSTCHANGE) { + reg_timer_r_tmr0_data data; + reg_timer_rw_tmr0_div div = (freqs->new * 500) / HZ; + do { + data = REG_RD(timer, timer_regs[freqs->cpu], + r_tmr0_data); + } while (data > 20); + REG_WR(timer, timer_regs[freqs->cpu], rw_tmr0_div, div); + } + return 0; +} +#endif diff --git a/arch/cris/arch-v32/kernel/traps.c b/arch/cris/arch-v32/kernel/traps.c index 17fd3dbd1c80..9003e382cada 100644 --- a/arch/cris/arch-v32/kernel/traps.c +++ b/arch/cris/arch-v32/kernel/traps.c @@ -1,50 +1,45 @@ /* - * Copyright (C) 2003, Axis Communications AB. + * Copyright (C) 2003-2006, Axis Communications AB. */ #include <linux/ptrace.h> +#include <linux/module.h> #include <asm/uaccess.h> - -#include <asm/arch/hwregs/supp_reg.h> - -extern void reset_watchdog(void); -extern void stop_watchdog(void); - -extern int raw_printk(const char *fmt, ...); +#include <hwregs/supp_reg.h> +#include <hwregs/intr_vect_defs.h> +#include <asm/irq.h> void show_registers(struct pt_regs *regs) { /* * It's possible to use either the USP register or current->thread.usp. - * USP might not correspond to the current proccess for all cases this + * USP might not correspond to the current process for all cases this * function is called, and current->thread.usp isn't up to date for the - * current proccess. Experience shows that using USP is the way to go. + * current process. Experience shows that using USP is the way to go. */ - unsigned long usp; + unsigned long usp = rdusp(); unsigned long d_mmu_cause; unsigned long i_mmu_cause; - usp = rdusp(); + printk("CPU: %d\n", smp_processor_id()); - raw_printk("CPU: %d\n", smp_processor_id()); + printk("ERP: %08lx SRP: %08lx CCS: %08lx USP: %08lx MOF: %08lx\n", + regs->erp, regs->srp, regs->ccs, usp, regs->mof); - raw_printk("ERP: %08lx SRP: %08lx CCS: %08lx USP: %08lx MOF: %08lx\n", - regs->erp, regs->srp, regs->ccs, usp, regs->mof); + printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n", + regs->r0, regs->r1, regs->r2, regs->r3); - raw_printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n", - regs->r0, regs->r1, regs->r2, regs->r3); + printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n", + regs->r4, regs->r5, regs->r6, regs->r7); - raw_printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n", - regs->r4, regs->r5, regs->r6, regs->r7); + printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n", + regs->r8, regs->r9, regs->r10, regs->r11); - raw_printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n", - regs->r8, regs->r9, regs->r10, regs->r11); + printk("r12: %08lx r13: %08lx oR10: %08lx acr: %08lx\n", + regs->r12, regs->r13, regs->orig_r10, regs->acr); - raw_printk("r12: %08lx r13: %08lx oR10: %08lx acr: %08lx\n", - regs->r12, regs->r13, regs->orig_r10, regs->acr); - - raw_printk("sp: %08lx\n", regs); + printk(" sp: %08lx\n", (unsigned long)regs); SUPP_BANK_SEL(BANK_IM); SUPP_REG_RD(RW_MM_CAUSE, i_mmu_cause); @@ -52,18 +47,20 @@ show_registers(struct pt_regs *regs) SUPP_BANK_SEL(BANK_DM); SUPP_REG_RD(RW_MM_CAUSE, d_mmu_cause); - raw_printk(" Data MMU Cause: %08lx\n", d_mmu_cause); - raw_printk("Instruction MMU Cause: %08lx\n", i_mmu_cause); + printk(" Data MMU Cause: %08lx\n", d_mmu_cause); + printk("Instruction MMU Cause: %08lx\n", i_mmu_cause); - raw_printk("Process %s (pid: %d, stackpage: %08lx)\n", - current->comm, current->pid, (unsigned long) current); + printk("Process %s (pid: %d, stackpage=%08lx)\n", + current->comm, current->pid, (unsigned long)current); - /* Show additional info if in kernel-mode. */ + /* + * When in-kernel, we also print out the stack and code at the + * time of the fault.. + */ if (!user_mode(regs)) { int i; - unsigned char c; - show_stack(NULL, (unsigned long *) usp); + show_stack(NULL, (unsigned long *)usp); /* * If the previous stack-dump wasn't a kernel one, dump the @@ -72,7 +69,7 @@ show_registers(struct pt_regs *regs) if (usp != 0) show_stack(NULL, NULL); - raw_printk("\nCode: "); + printk("\nCode: "); if (regs->erp < PAGE_OFFSET) goto bad_value; @@ -84,76 +81,115 @@ show_registers(struct pt_regs *regs) * instruction decoding should be in sync at the interesting * point, but small enough to fit on a row. The regs->erp * location is pointed out in a ksymoops-friendly way by - * wrapping the byte for that address in parenthesis. + * wrapping the byte for that address in parenthesises. */ for (i = -12; i < 12; i++) { - if (__get_user(c, &((unsigned char *) regs->erp)[i])) { + unsigned char c; + + if (__get_user(c, &((unsigned char *)regs->erp)[i])) { bad_value: - raw_printk(" Bad IP value."); + printk(" Bad IP value."); break; } if (i == 0) - raw_printk("(%02x) ", c); + printk("(%02x) ", c); else - raw_printk("%02x ", c); + printk("%02x ", c); } - - raw_printk("\n"); + printk("\n"); } } -/* - * This gets called from entry.S when the watchdog has bitten. Show something - * similar to an Oops dump, and if the kernel is configured to be a nice doggy; - * halt instead of reboot. - */ void -watchdog_bite_hook(struct pt_regs *regs) +arch_enable_nmi(void) { -#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY - local_irq_disable(); - stop_watchdog(); - show_registers(regs); + unsigned long flags; - while (1) - ; /* Do nothing. */ -#else - show_registers(regs); -#endif + local_save_flags(flags); + flags |= (1 << 30); /* NMI M flag is at bit 30 */ + local_irq_restore(flags); } -/* This is normally the Oops function. */ -void -die_if_kernel(const char *str, struct pt_regs *regs, long err) +extern void (*nmi_handler)(struct pt_regs *); +void handle_nmi(struct pt_regs *regs) { - if (user_mode(regs)) - return; +#ifdef CONFIG_ETRAXFS + reg_intr_vect_r_nmi r; +#endif -#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY - /* - * This printout might take too long and could trigger - * the watchdog normally. If NICE_DOGGY is set, simply - * stop the watchdog during the printout. - */ - stop_watchdog(); + if (nmi_handler) + nmi_handler(regs); + +#ifdef CONFIG_ETRAXFS + /* Wait until nmi is no longer active. */ + do { + r = REG_RD(intr_vect, regi_irq, r_nmi); + } while (r.ext == regk_intr_vect_on); #endif +} - raw_printk("%s: %04lx\n", str, err & 0xffff); - show_registers(regs); +#ifdef CONFIG_BUG +extern void die_if_kernel(const char *str, struct pt_regs *regs, long err); -#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY - reset_watchdog(); -#endif +/* Copy of the regs at BUG() time. */ +struct pt_regs BUG_regs; - do_exit(SIGSEGV); +void do_BUG(char *file, unsigned int line) +{ + printk("kernel BUG at %s:%d!\n", file, line); + die_if_kernel("Oops", &BUG_regs, 0); } +EXPORT_SYMBOL(do_BUG); -void arch_enable_nmi(void) +void fixup_BUG(struct pt_regs *regs) { - unsigned long flags; - local_save_flags(flags); - flags |= (1<<30); /* NMI M flag is at bit 30 */ - local_irq_restore(flags); + BUG_regs = *regs; + +#ifdef CONFIG_DEBUG_BUGVERBOSE + /* + * Fixup the BUG arguments through exception handlers. + */ + { + const struct exception_table_entry *fixup; + + /* + * ERP points at the "break 14" + 2, compensate for the 2 + * bytes. + */ + fixup = search_exception_tables(instruction_pointer(regs) - 2); + if (fixup) { + /* Adjust the instruction pointer in the stackframe. */ + instruction_pointer(regs) = fixup->fixup; + arch_fixup(regs); + } + } +#else + /* Dont try to lookup the filename + line, just dump regs. */ + do_BUG("unknown", 0); +#endif } + +/* + * Break 14 handler. Save regs and jump into the fixup_BUG. + */ +__asm__ ( ".text\n\t" + ".global breakh_BUG\n\t" + "breakh_BUG:\n\t" + SAVE_ALL + KGDB_FIXUP + "move.d $sp, $r10\n\t" + "jsr fixup_BUG\n\t" + "nop\n\t" + "jump ret_from_intr\n\t" + "nop\n\t"); + + +#ifdef CONFIG_DEBUG_BUGVERBOSE +void +handle_BUG(struct pt_regs *regs) +{ +} +#endif +#endif diff --git a/arch/cris/arch-v32/kernel/vcs_hook.c b/arch/cris/arch-v32/kernel/vcs_hook.c deleted file mode 100644 index 64d71c54c22c..000000000000 --- a/arch/cris/arch-v32/kernel/vcs_hook.c +++ /dev/null @@ -1,96 +0,0 @@ -// $Id: vcs_hook.c,v 1.2 2003/08/12 12:01:06 starvik Exp $ -// -// Call simulator hook. This is the part running in the -// simulated program. -// - -#include "vcs_hook.h" -#include <stdarg.h> -#include <asm/arch-v32/hwregs/reg_map.h> -#include <asm/arch-v32/hwregs/intr_vect_defs.h> - -#define HOOK_TRIG_ADDR 0xb7000000 /* hook cvlog model reg address */ -#define HOOK_MEM_BASE_ADDR 0xa0000000 /* csp4 (shared mem) base addr */ - -#define HOOK_DATA(offset) ((unsigned*) HOOK_MEM_BASE_ADDR)[offset] -#define VHOOK_DATA(offset) ((volatile unsigned*) HOOK_MEM_BASE_ADDR)[offset] -#define HOOK_TRIG(funcid) do { *((unsigned *) HOOK_TRIG_ADDR) = funcid; } while(0) -#define HOOK_DATA_BYTE(offset) ((unsigned char*) HOOK_MEM_BASE_ADDR)[offset] - - -// ------------------------------------------------------------------ hook_call -int hook_call( unsigned id, unsigned pcnt, ...) { - va_list ap; - unsigned i; - unsigned ret; -#ifdef USING_SOS - PREEMPT_OFF_SAVE(); -#endif - - // pass parameters - HOOK_DATA(0) = id; - - /* Have to make hook_print_str a special case since we call with a - parameter of byte type. Should perhaps be a separate - hook_call. */ - - if (id == hook_print_str) { - int i; - char *str; - - HOOK_DATA(1) = pcnt; - - va_start(ap, pcnt); - str = (char*)va_arg(ap,unsigned); - - for (i=0; i!=pcnt; i++) { - HOOK_DATA_BYTE(8+i) = str[i]; - } - HOOK_DATA_BYTE(8+i) = 0; /* null byte */ - } - else { - va_start(ap, pcnt); - for( i = 1; i <= pcnt; i++ ) HOOK_DATA(i) = va_arg(ap,unsigned); - va_end(ap); - } - - // read from mem to make sure data has propagated to memory before trigging - *((volatile unsigned*) HOOK_MEM_BASE_ADDR); - - // trigger hook - HOOK_TRIG(id); - - // wait for call to finish - while( VHOOK_DATA(0) > 0 ) {} - - // extract return value - - ret = VHOOK_DATA(1); - -#ifdef USING_SOS - PREEMPT_RESTORE(); -#endif - return ret; -} - -unsigned -hook_buf(unsigned i) -{ - return (HOOK_DATA(i)); -} - -void print_str( const char *str ) { - int i; - for (i=1; str[i]; i++); /* find null at end of string */ - hook_call(hook_print_str, i, str); -} - -// --------------------------------------------------------------- CPU_KICK_DOG -void CPU_KICK_DOG(void) { - (void) hook_call( hook_kick_dog, 0 ); -} - -// ------------------------------------------------------- CPU_WATCHDOG_TIMEOUT -void CPU_WATCHDOG_TIMEOUT( unsigned t ) { - (void) hook_call( hook_dog_timeout, 1, t ); -} diff --git a/arch/cris/arch-v32/lib/Makefile b/arch/cris/arch-v32/lib/Makefile index 05b3ec6978d6..eb4aad1f1158 100644 --- a/arch/cris/arch-v32/lib/Makefile +++ b/arch/cris/arch-v32/lib/Makefile @@ -2,5 +2,6 @@ # Makefile for Etrax-specific library files.. # -lib-y = checksum.o checksumcopy.o string.o usercopy.o memset.o csumcpfruser.o spinlock.o +lib-y = checksum.o checksumcopy.o string.o usercopy.o memset.o \ + csumcpfruser.o spinlock.o delay.o diff --git a/arch/cris/arch-v32/lib/checksum.S b/arch/cris/arch-v32/lib/checksum.S index 32e66181b826..87f3fd71ab10 100644 --- a/arch/cris/arch-v32/lib/checksum.S +++ b/arch/cris/arch-v32/lib/checksum.S @@ -1,6 +1,6 @@ /* * A fast checksum routine using movem - * Copyright (c) 1998-2001, 2003 Axis Communications AB + * Copyright (c) 1998-2007 Axis Communications AB * * csum_partial(const unsigned char * buff, int len, unsigned int sum) */ @@ -12,30 +12,23 @@ csum_partial: ;; r11 - length ;; r12 - checksum - ;; check for breakeven length between movem and normal word looping versions - ;; we also do _NOT_ want to compute a checksum over more than the - ;; actual length when length < 40 - - cmpu.w 80,$r11 - blo _word_loop - nop - - ;; need to save the registers we use below in the movem loop - ;; this overhead is why we have a check above for breakeven length - ;; only r0 - r8 have to be saved, the other ones are clobber-able - ;; according to the ABI + ;; Optimized for large packets + subq 10*4, $r11 + blt _word_loop + move.d $r11, $acr subq 9*4,$sp - subq 10*4,$r11 ; update length for the first loop + clearf c movem $r8,[$sp] ;; do a movem checksum _mloop: movem [$r10+],$r9 ; read 10 longwords - + ;; Loop count without touching the c flag. + addoq -10*4, $acr, $acr ;; perform dword checksumming on the 10 longwords - add.d $r0,$r12 + addc $r0,$r12 addc $r1,$r12 addc $r2,$r12 addc $r3,$r12 @@ -46,60 +39,41 @@ _mloop: movem [$r10+],$r9 ; read 10 longwords addc $r8,$r12 addc $r9,$r12 - ;; fold the carry into the checksum, to avoid having to loop the carry - ;; back into the top - - addc 0,$r12 - addc 0,$r12 ; do it again, since we might have generated a carry - - subq 10*4,$r11 - bge _mloop - nop - - addq 10*4,$r11 ; compensate for last loop underflowing length + ;; test $acr without trashing carry. + move.d $acr, $acr + bpl _mloop + ;; r11 <= acr is not really needed in the mloop, just using the dslot + ;; to prepare for what is needed after mloop. + move.d $acr, $r11 + ;; fold the last carry into r13 + addc 0, $r12 movem [$sp+],$r8 ; restore regs _word_loop: - ;; only fold if there is anything to fold. - - cmpq 0,$r12 - beq _no_fold - - ;; fold 32-bit checksum into a 16-bit checksum, to avoid carries below. - ;; r9 and r13 can be used as temporaries. + addq 10*4,$r11 ; compensate for last loop underflowing length moveq -1,$r9 ; put 0xffff in r9, faster than move.d 0xffff,r9 lsrq 16,$r9 move.d $r12,$r13 lsrq 16,$r13 ; r13 = checksum >> 16 - and.d $r9,$r12 ; checksum = checksum & 0xffff - add.d $r13,$r12 ; checksum += r13 - move.d $r12,$r13 ; do the same again, maybe we got a carry last add - lsrq 16,$r13 - and.d $r9,$r12 - add.d $r13,$r12 + and.d $r9,$r12 ; checksum = checksum & 0xffff _no_fold: - cmpq 2,$r11 + subq 2,$r11 blt _no_words - nop + add.d $r13,$r12 ; checksum += r13 ;; checksum the rest of the words - - subq 2,$r11 - _wloop: subq 2,$r11 bge _wloop addu.w [$r10+],$r12 - addq 2,$r11 - _no_words: + addq 2,$r11 ;; see if we have one odd byte more - cmpq 1,$r11 - beq _do_byte + bne _do_byte nop ret move.d $r12,$r10 diff --git a/arch/cris/arch-v32/lib/checksumcopy.S b/arch/cris/arch-v32/lib/checksumcopy.S index 9303ccbadc6d..21aabe91489b 100644 --- a/arch/cris/arch-v32/lib/checksumcopy.S +++ b/arch/cris/arch-v32/lib/checksumcopy.S @@ -1,6 +1,6 @@ /* * A fast checksum+copy routine using movem - * Copyright (c) 1998, 2001, 2003 Axis Communications AB + * Copyright (c) 1998-2007 Axis Communications AB * * Authors: Bjorn Wesen * @@ -16,32 +16,23 @@ csum_partial_copy_nocheck: ;; r12 - length ;; r13 - checksum - ;; check for breakeven length between movem and normal word looping versions - ;; we also do _NOT_ want to compute a checksum over more than the - ;; actual length when length < 40 - - cmpu.w 80,$r12 - blo _word_loop - nop - - ;; need to save the registers we use below in the movem loop - ;; this overhead is why we have a check above for breakeven length - ;; only r0 - r8 have to be saved, the other ones are clobber-able - ;; according to the ABI + ;; Optimized for large packets + subq 10*4, $r12 + blt _word_loop + move.d $r12, $acr subq 9*4,$sp - subq 10*4,$r12 ; update length for the first loop + clearf c movem $r8,[$sp] ;; do a movem copy and checksum - 1: ;; A failing userspace access (the read) will have this as PC. _mloop: movem [$r10+],$r9 ; read 10 longwords + addoq -10*4, $acr, $acr ; loop counter in latency cycle movem $r9,[$r11+] ; write 10 longwords ;; perform dword checksumming on the 10 longwords - - add.d $r0,$r13 + addc $r0,$r13 addc $r1,$r13 addc $r2,$r13 addc $r3,$r13 @@ -52,47 +43,30 @@ _mloop: movem [$r10+],$r9 ; read 10 longwords addc $r8,$r13 addc $r9,$r13 - ;; fold the carry into the checksum, to avoid having to loop the carry - ;; back into the top - - addc 0,$r13 - addc 0,$r13 ; do it again, since we might have generated a carry - - subq 10*4,$r12 - bge _mloop - nop - - addq 10*4,$r12 ; compensate for last loop underflowing length + ;; test $acr, without trashing carry. + move.d $acr, $acr + bpl _mloop + ;; r12 <= acr is needed after mloop and in the exception handlers. + move.d $acr, $r12 + ;; fold the last carry into r13 + addc 0, $r13 movem [$sp+],$r8 ; restore regs _word_loop: - ;; only fold if there is anything to fold. - - cmpq 0,$r13 - beq _no_fold + addq 10*4,$r12 ; compensate for last loop underflowing length ;; fold 32-bit checksum into a 16-bit checksum, to avoid carries below ;; r9 can be used as temporary. - move.d $r13,$r9 lsrq 16,$r9 ; r0 = checksum >> 16 and.d 0xffff,$r13 ; checksum = checksum & 0xffff - add.d $r9,$r13 ; checksum += r0 - move.d $r13,$r9 ; do the same again, maybe we got a carry last add - lsrq 16,$r9 - and.d 0xffff,$r13 - add.d $r9,$r13 -_no_fold: - cmpq 2,$r12 + subq 2, $r12 blt _no_words - nop + add.d $r9,$r13 ; checksum += r0 ;; copy and checksum the rest of the words - - subq 2,$r12 - 2: ;; A failing userspace access for the read below will have this as PC. _wloop: move.w [$r10+],$r9 addu.w $r9,$r13 @@ -100,12 +74,9 @@ _wloop: move.w [$r10+],$r9 bge _wloop move.w $r9,[$r11+] - addq 2,$r12 - _no_words: - ;; see if we have one odd byte more - cmpq 1,$r12 - beq _do_byte + addq 2,$r12 + bne _do_byte nop ret move.d $r13,$r10 diff --git a/arch/cris/arch-v32/lib/delay.c b/arch/cris/arch-v32/lib/delay.c new file mode 100644 index 000000000000..39f1ac9995b4 --- /dev/null +++ b/arch/cris/arch-v32/lib/delay.c @@ -0,0 +1,28 @@ +/* + * Precise Delay Loops for ETRAX FS + * + * Copyright (C) 2006 Axis Communications AB. + * + */ + +#include <hwregs/reg_map.h> +#include <hwregs/reg_rdwr.h> +#include <hwregs/timer_defs.h> +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/module.h> + +/* + * On ETRAX FS, we can check the free-running read-only 100MHz timer + * getting 32-bit 10ns precision, theoretically good for 42.94967295 + * seconds. Unsigned arithmetic and careful expression handles + * wrapping. + */ + +void cris_delay10ns(u32 n10ns) +{ + u32 t0 = REG_RD(timer, regi_timer0, r_time); + while (REG_RD(timer, regi_timer0, r_time) - t0 < n10ns) + ; +} +EXPORT_SYMBOL(cris_delay10ns); diff --git a/arch/cris/arch-v32/lib/spinlock.S b/arch/cris/arch-v32/lib/spinlock.S index 2437ae7f6ed2..79087ef59a1c 100644 --- a/arch/cris/arch-v32/lib/spinlock.S +++ b/arch/cris/arch-v32/lib/spinlock.S @@ -12,11 +12,11 @@ cris_spin_lock: clearf p -1: test.d [$r10] +1: test.b [$r10] beq 1b clearf p ax - clear.d [$r10] + clear.b [$r10] bcs 1b clearf p ret @@ -24,10 +24,10 @@ cris_spin_lock: cris_spin_trylock: clearf p -1: move.d [$r10], $r11 +1: move.b [$r10], $r11 ax - clear.d [$r10] + clear.b [$r10] bcs 1b clearf p ret - move.d $r11,$r10 + movu.b $r11,$r10 diff --git a/arch/cris/arch-v32/mach-a3/Kconfig b/arch/cris/arch-v32/mach-a3/Kconfig new file mode 100644 index 000000000000..a4df06d5997a --- /dev/null +++ b/arch/cris/arch-v32/mach-a3/Kconfig @@ -0,0 +1,110 @@ +if CRIS_MACH_ARTPEC3 + +menu "Artpec-3 options" + depends on CRIS_MACH_ARTPEC3 + +config ETRAX_DRAM_VIRTUAL_BASE + hex + default "c0000000" + +config ETRAX_L2CACHE + bool + default y + +config ETRAX_SERIAL_PORTS + int + default 5 + +config ETRAX_DDR + bool + default y + +config ETRAX_DDR2_MRS + hex "DDR2 MRS" + default "0" + +config ETRAX_DDR2_TIMING + hex "DDR2 SDRAM timing" + default "0" + help + SDRAM timing parameters. + +config ETRAX_DDR2_CONFIG + hex "DDR2 config" + default "0" + +config ETRAX_PIO_CE0_CFG + hex "PIO CE0 configuration" + default "0" + +config ETRAX_PIO_CE1_CFG + hex "PIO CE1 configuration" + default "0" + +config ETRAX_PIO_CE2_CFG + hex "PIO CE2 configuration" + default "0" + +config ETRAX_DEF_GIO_PA_OE + hex "GIO_PA_OE" + default "00000000" + help + Configures the direction of general port A bits. 1 is out, 0 is in. + This is often totally different depending on the product used. + There are some guidelines though - if you know that only LED's are + connected to port PA, then they are usually connected to bits 2-4 + and you can therefore use 1c. On other boards which don't have the + LED's at the general ports, these bits are used for all kinds of + stuff. If you don't know what to use, it is always safe to put all + as inputs, although floating inputs isn't good. + +config ETRAX_DEF_GIO_PA_OUT + hex "GIO_PA_OUT" + default "00000000" + help + Configures the initial data for the general port A bits. Most + products should use 00 here. + +config ETRAX_DEF_GIO_PB_OE + hex "GIO_PB_OE" + default "000000000" + help + Configures the direction of general port B bits. 1 is out, 0 is in. + This is often totally different depending on the product used. + There are some guidelines though - if you know that only LED's are + connected to port PA, then they are usually connected to bits 2-4 + and you can therefore use 1c. On other boards which don't have the + LED's at the general ports, these bits are used for all kinds of + stuff. If you don't know what to use, it is always safe to put all + as inputs, although floating inputs isn't good. + +config ETRAX_DEF_GIO_PB_OUT + hex "GIO_PB_OUT" + default "000000000" + help + Configures the initial data for the general port B bits. Most + products should use 00000 here. + +config ETRAX_DEF_GIO_PC_OE + hex "GIO_PC_OE" + default "00000" + help + Configures the direction of general port C bits. 1 is out, 0 is in. + This is often totally different depending on the product used. + There are some guidelines though - if you know that only LED's are + connected to port PA, then they are usually connected to bits 2-4 + and you can therefore use 1c. On other boards which don't have the + LED's at the general ports, these bits are used for all kinds of + stuff. If you don't know what to use, it is always safe to put all + as inputs, although floating inputs isn't good. + +config ETRAX_DEF_GIO_PC_OUT + hex "GIO_PC_OUT" + default "00000" + help + Configures the initial data for the general port C bits. Most + products should use 00000 here. + +endmenu + +endif diff --git a/arch/cris/arch-v32/mach-a3/Makefile b/arch/cris/arch-v32/mach-a3/Makefile new file mode 100644 index 000000000000..41fa6a6893a9 --- /dev/null +++ b/arch/cris/arch-v32/mach-a3/Makefile @@ -0,0 +1,11 @@ +# $Id: Makefile,v 1.3 2007/03/13 11:57:46 starvik Exp $ +# +# Makefile for the linux kernel. +# + +obj-y := dma.o pinmux.o io.o arbiter.o +obj-$(CONFIG_ETRAX_VCS_SIM) += vcs_hook.o +obj-$(CONFIG_CPU_FREQ) += cpufreq.o + +clean: + diff --git a/arch/cris/arch-v32/mach-a3/arbiter.c b/arch/cris/arch-v32/mach-a3/arbiter.c new file mode 100644 index 000000000000..8b924db71c9a --- /dev/null +++ b/arch/cris/arch-v32/mach-a3/arbiter.c @@ -0,0 +1,634 @@ +/* + * Memory arbiter functions. Allocates bandwidth through the + * arbiter and sets up arbiter breakpoints. + * + * The algorithm first assigns slots to the clients that has specified + * bandwidth (e.g. ethernet) and then the remaining slots are divided + * on all the active clients. + * + * Copyright (c) 2004-2007 Axis Communications AB. + * + * The artpec-3 has two arbiters. The memory hierarchy looks like this: + * + * + * CPU DMAs + * | | + * | | + * -------------- ------------------ + * | foo arbiter|----| Internal memory| + * -------------- ------------------ + * | + * -------------- + * | L2 cache | + * -------------- + * | + * h264 etc | + * | | + * | | + * -------------- + * | bar arbiter| + * -------------- + * | + * --------- + * | SDRAM | + * --------- + * + */ + +#include <hwregs/reg_map.h> +#include <hwregs/reg_rdwr.h> +#include <hwregs/marb_foo_defs.h> +#include <hwregs/marb_bar_defs.h> +#include <arbiter.h> +#include <hwregs/intr_vect.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/signal.h> +#include <linux/errno.h> +#include <linux/spinlock.h> +#include <asm/io.h> +#include <asm/irq_regs.h> + +#define D(x) + +struct crisv32_watch_entry { + unsigned long instance; + watch_callback *cb; + unsigned long start; + unsigned long end; + int used; +}; + +#define NUMBER_OF_BP 4 +#define SDRAM_BANDWIDTH 400000000 +#define INTMEM_BANDWIDTH 400000000 +#define NBR_OF_SLOTS 64 +#define NBR_OF_REGIONS 2 +#define NBR_OF_CLIENTS 15 +#define ARBITERS 2 +#define UNASSIGNED 100 + +struct arbiter { + unsigned long instance; + int nbr_regions; + int nbr_clients; + int requested_slots[NBR_OF_REGIONS][NBR_OF_CLIENTS]; + int active_clients[NBR_OF_REGIONS][NBR_OF_CLIENTS]; +}; + +static struct crisv32_watch_entry watches[ARBITERS][NUMBER_OF_BP] = +{ + { + {regi_marb_foo_bp0}, + {regi_marb_foo_bp1}, + {regi_marb_foo_bp2}, + {regi_marb_foo_bp3} + }, + { + {regi_marb_bar_bp0}, + {regi_marb_bar_bp1}, + {regi_marb_bar_bp2}, + {regi_marb_bar_bp3} + } +}; + +struct arbiter arbiters[ARBITERS] = +{ + { /* L2 cache arbiter */ + .instance = regi_marb_foo, + .nbr_regions = 2, + .nbr_clients = 15 + }, + { /* DDR2 arbiter */ + .instance = regi_marb_bar, + .nbr_regions = 1, + .nbr_clients = 9 + } +}; + +static int max_bandwidth[NBR_OF_REGIONS] = {SDRAM_BANDWIDTH, INTMEM_BANDWIDTH}; + +DEFINE_SPINLOCK(arbiter_lock); + +static irqreturn_t +crisv32_foo_arbiter_irq(int irq, void *dev_id); +static irqreturn_t +crisv32_bar_arbiter_irq(int irq, void *dev_id); + +/* + * "I'm the arbiter, I know the score. + * From square one I'll be watching all 64." + * (memory arbiter slots, that is) + * + * Or in other words: + * Program the memory arbiter slots for "region" according to what's + * in requested_slots[] and active_clients[], while minimizing + * latency. A caller may pass a non-zero positive amount for + * "unused_slots", which must then be the unallocated, remaining + * number of slots, free to hand out to any client. + */ + +static void crisv32_arbiter_config(int arbiter, int region, int unused_slots) +{ + int slot; + int client; + int interval = 0; + + /* + * This vector corresponds to the hardware arbiter slots (see + * the hardware documentation for semantics). We initialize + * each slot with a suitable sentinel value outside the valid + * range {0 .. NBR_OF_CLIENTS - 1} and replace them with + * client indexes. Then it's fed to the hardware. + */ + s8 val[NBR_OF_SLOTS]; + + for (slot = 0; slot < NBR_OF_SLOTS; slot++) + val[slot] = -1; + + for (client = 0; client < arbiters[arbiter].nbr_clients; client++) { + int pos; + /* Allocate the requested non-zero number of slots, but + * also give clients with zero-requests one slot each + * while stocks last. We do the latter here, in client + * order. This makes sure zero-request clients are the + * first to get to any spare slots, else those slots + * could, when bandwidth is allocated close to the limit, + * all be allocated to low-index non-zero-request clients + * in the default-fill loop below. Another positive but + * secondary effect is a somewhat better spread of the + * zero-bandwidth clients in the vector, avoiding some of + * the latency that could otherwise be caused by the + * partitioning of non-zero-bandwidth clients at low + * indexes and zero-bandwidth clients at high + * indexes. (Note that this spreading can only affect the + * unallocated bandwidth.) All the above only matters for + * memory-intensive situations, of course. + */ + if (!arbiters[arbiter].requested_slots[region][client]) { + /* + * Skip inactive clients. Also skip zero-slot + * allocations in this pass when there are no known + * free slots. + */ + if (!arbiters[arbiter].active_clients[region][client] || + unused_slots <= 0) + continue; + + unused_slots--; + + /* Only allocate one slot for this client. */ + interval = NBR_OF_SLOTS; + } else + interval = NBR_OF_SLOTS / + arbiters[arbiter].requested_slots[region][client]; + + pos = 0; + while (pos < NBR_OF_SLOTS) { + if (val[pos] >= 0) + pos++; + else { + val[pos] = client; + pos += interval; + } + } + } + + client = 0; + for (slot = 0; slot < NBR_OF_SLOTS; slot++) { + /* + * Allocate remaining slots in round-robin + * client-number order for active clients. For this + * pass, we ignore requested bandwidth and previous + * allocations. + */ + if (val[slot] < 0) { + int first = client; + while (!arbiters[arbiter].active_clients[region][client]) { + client = (client + 1) % + arbiters[arbiter].nbr_clients; + if (client == first) + break; + } + val[slot] = client; + client = (client + 1) % arbiters[arbiter].nbr_clients; + } + if (arbiter == 0) { + if (region == EXT_REGION) + REG_WR_INT_VECT(marb_foo, regi_marb_foo, + rw_l2_slots, slot, val[slot]); + else if (region == INT_REGION) + REG_WR_INT_VECT(marb_foo, regi_marb_foo, + rw_intm_slots, slot, val[slot]); + } else { + REG_WR_INT_VECT(marb_bar, regi_marb_bar, + rw_ddr2_slots, slot, val[slot]); + } + } +} + +extern char _stext, _etext; + +static void crisv32_arbiter_init(void) +{ + static int initialized; + + if (initialized) + return; + + initialized = 1; + + /* + * CPU caches are always set to active, but with zero + * bandwidth allocated. It should be ok to allocate zero + * bandwidth for the caches, because DMA for other channels + * will supposedly finish, once their programmed amount is + * done, and then the caches will get access according to the + * "fixed scheme" for unclaimed slots. Though, if for some + * use-case somewhere, there's a maximum CPU latency for + * e.g. some interrupt, we have to start allocating specific + * bandwidth for the CPU caches too. + */ + arbiters[0].active_clients[EXT_REGION][11] = 1; + arbiters[0].active_clients[EXT_REGION][12] = 1; + crisv32_arbiter_config(0, EXT_REGION, 0); + crisv32_arbiter_config(0, INT_REGION, 0); + crisv32_arbiter_config(1, EXT_REGION, 0); + + if (request_irq(MEMARB_FOO_INTR_VECT, crisv32_foo_arbiter_irq, + IRQF_DISABLED, "arbiter", NULL)) + printk(KERN_ERR "Couldn't allocate arbiter IRQ\n"); + + if (request_irq(MEMARB_BAR_INTR_VECT, crisv32_bar_arbiter_irq, + IRQF_DISABLED, "arbiter", NULL)) + printk(KERN_ERR "Couldn't allocate arbiter IRQ\n"); + +#ifndef CONFIG_ETRAX_KGDB + /* Global watch for writes to kernel text segment. */ + crisv32_arbiter_watch(virt_to_phys(&_stext), &_etext - &_stext, + MARB_CLIENTS(arbiter_all_clients, arbiter_bar_all_clients), + arbiter_all_write, NULL); +#endif + + /* Set up max burst sizes by default */ + REG_WR_INT(marb_bar, regi_marb_bar, rw_h264_rd_burst, 3); + REG_WR_INT(marb_bar, regi_marb_bar, rw_h264_wr_burst, 3); + REG_WR_INT(marb_bar, regi_marb_bar, rw_ccd_burst, 3); + REG_WR_INT(marb_bar, regi_marb_bar, rw_vin_wr_burst, 3); + REG_WR_INT(marb_bar, regi_marb_bar, rw_vin_rd_burst, 3); + REG_WR_INT(marb_bar, regi_marb_bar, rw_sclr_rd_burst, 3); + REG_WR_INT(marb_bar, regi_marb_bar, rw_vout_burst, 3); + REG_WR_INT(marb_bar, regi_marb_bar, rw_sclr_fifo_burst, 3); + REG_WR_INT(marb_bar, regi_marb_bar, rw_l2cache_burst, 3); +} + +int crisv32_arbiter_allocate_bandwidth(int client, int region, + unsigned long bandwidth) +{ + int i; + int total_assigned = 0; + int total_clients = 0; + int req; + int arbiter = 0; + + crisv32_arbiter_init(); + + if (client & 0xffff0000) { + arbiter = 1; + client >>= 16; + } + + for (i = 0; i < arbiters[arbiter].nbr_clients; i++) { + total_assigned += arbiters[arbiter].requested_slots[region][i]; + total_clients += arbiters[arbiter].active_clients[region][i]; + } + + /* Avoid division by 0 for 0-bandwidth requests. */ + req = bandwidth == 0 + ? 0 : NBR_OF_SLOTS / (max_bandwidth[region] / bandwidth); + + /* + * We make sure that there are enough slots only for non-zero + * requests. Requesting 0 bandwidth *may* allocate slots, + * though if all bandwidth is allocated, such a client won't + * get any and will have to rely on getting memory access + * according to the fixed scheme that's the default when one + * of the slot-allocated clients doesn't claim their slot. + */ + if (total_assigned + req > NBR_OF_SLOTS) + return -ENOMEM; + + arbiters[arbiter].active_clients[region][client] = 1; + arbiters[arbiter].requested_slots[region][client] = req; + crisv32_arbiter_config(arbiter, region, NBR_OF_SLOTS - total_assigned); + + /* Propagate allocation from foo to bar */ + if (arbiter == 0) + crisv32_arbiter_allocate_bandwidth(8 << 16, + EXT_REGION, bandwidth); + return 0; +} + +/* + * Main entry for bandwidth deallocation. + * + * Strictly speaking, for a somewhat constant set of clients where + * each client gets a constant bandwidth and is just enabled or + * disabled (somewhat dynamically), no action is necessary here to + * avoid starvation for non-zero-allocation clients, as the allocated + * slots will just be unused. However, handing out those unused slots + * to active clients avoids needless latency if the "fixed scheme" + * would give unclaimed slots to an eager low-index client. + */ + +void crisv32_arbiter_deallocate_bandwidth(int client, int region) +{ + int i; + int total_assigned = 0; + int arbiter = 0; + + if (client & 0xffff0000) + arbiter = 1; + + arbiters[arbiter].requested_slots[region][client] = 0; + arbiters[arbiter].active_clients[region][client] = 0; + + for (i = 0; i < arbiters[arbiter].nbr_clients; i++) + total_assigned += arbiters[arbiter].requested_slots[region][i]; + + crisv32_arbiter_config(arbiter, region, NBR_OF_SLOTS - total_assigned); +} + +int crisv32_arbiter_watch(unsigned long start, unsigned long size, + unsigned long clients, unsigned long accesses, + watch_callback *cb) +{ + int i; + int arbiter; + int used[2]; + int ret = 0; + + crisv32_arbiter_init(); + + if (start > 0x80000000) { + printk(KERN_ERR "Arbiter: %lX doesn't look like a " + "physical address", start); + return -EFAULT; + } + + spin_lock(&arbiter_lock); + + if (clients & 0xffff) + used[0] = 1; + if (clients & 0xffff0000) + used[1] = 1; + + for (arbiter = 0; arbiter < ARBITERS; arbiter++) { + if (!used[arbiter]) + continue; + + for (i = 0; i < NUMBER_OF_BP; i++) { + if (!watches[arbiter][i].used) { + unsigned intr_mask; + if (arbiter) + intr_mask = REG_RD_INT(marb_bar, + regi_marb_bar, rw_intr_mask); + else + intr_mask = REG_RD_INT(marb_foo, + regi_marb_foo, rw_intr_mask); + + watches[arbiter][i].used = 1; + watches[arbiter][i].start = start; + watches[arbiter][i].end = start + size; + watches[arbiter][i].cb = cb; + + ret |= (i + 1) << (arbiter + 8); + if (arbiter) { + REG_WR_INT(marb_bar_bp, + watches[arbiter][i].instance, + rw_first_addr, + watches[arbiter][i].start); + REG_WR_INT(marb_bar_bp, + watches[arbiter][i].instance, + rw_last_addr, + watches[arbiter][i].end); + REG_WR_INT(marb_bar_bp, + watches[arbiter][i].instance, + rw_op, accesses); + REG_WR_INT(marb_bar_bp, + watches[arbiter][i].instance, + rw_clients, + clients & 0xffff); + } else { + REG_WR_INT(marb_foo_bp, + watches[arbiter][i].instance, + rw_first_addr, + watches[arbiter][i].start); + REG_WR_INT(marb_foo_bp, + watches[arbiter][i].instance, + rw_last_addr, + watches[arbiter][i].end); + REG_WR_INT(marb_foo_bp, + watches[arbiter][i].instance, + rw_op, accesses); + REG_WR_INT(marb_foo_bp, + watches[arbiter][i].instance, + rw_clients, clients >> 16); + } + + if (i == 0) + intr_mask |= 1; + else if (i == 1) + intr_mask |= 2; + else if (i == 2) + intr_mask |= 4; + else if (i == 3) + intr_mask |= 8; + + if (arbiter) + REG_WR_INT(marb_bar, regi_marb_bar, + rw_intr_mask, intr_mask); + else + REG_WR_INT(marb_foo, regi_marb_foo, + rw_intr_mask, intr_mask); + + spin_unlock(&arbiter_lock); + + break; + } + } + } + spin_unlock(&arbiter_lock); + if (ret) + return ret; + else + return -ENOMEM; +} + +int crisv32_arbiter_unwatch(int id) +{ + int arbiter; + int intr_mask; + + crisv32_arbiter_init(); + + spin_lock(&arbiter_lock); + + for (arbiter = 0; arbiter < ARBITERS; arbiter++) { + int id2; + + if (arbiter) + intr_mask = REG_RD_INT(marb_bar, regi_marb_bar, + rw_intr_mask); + else + intr_mask = REG_RD_INT(marb_foo, regi_marb_foo, + rw_intr_mask); + + id2 = (id & (0xff << (arbiter + 8))) >> (arbiter + 8); + if (id2 == 0) + continue; + id2--; + if ((id2 >= NUMBER_OF_BP) || (!watches[arbiter][id2].used)) { + spin_unlock(&arbiter_lock); + return -EINVAL; + } + + memset(&watches[arbiter][id2], 0, + sizeof(struct crisv32_watch_entry)); + + if (id2 == 0) + intr_mask &= ~1; + else if (id2 == 1) + intr_mask &= ~2; + else if (id2 == 2) + intr_mask &= ~4; + else if (id2 == 3) + intr_mask &= ~8; + + if (arbiter) + REG_WR_INT(marb_bar, regi_marb_bar, rw_intr_mask, + intr_mask); + else + REG_WR_INT(marb_foo, regi_marb_foo, rw_intr_mask, + intr_mask); + } + + spin_unlock(&arbiter_lock); + return 0; +} + +extern void show_registers(struct pt_regs *regs); + + +static irqreturn_t +crisv32_foo_arbiter_irq(int irq, void *dev_id) +{ + reg_marb_foo_r_masked_intr masked_intr = + REG_RD(marb_foo, regi_marb_foo, r_masked_intr); + reg_marb_foo_bp_r_brk_clients r_clients; + reg_marb_foo_bp_r_brk_addr r_addr; + reg_marb_foo_bp_r_brk_op r_op; + reg_marb_foo_bp_r_brk_first_client r_first; + reg_marb_foo_bp_r_brk_size r_size; + reg_marb_foo_bp_rw_ack ack = {0}; + reg_marb_foo_rw_ack_intr ack_intr = { + .bp0 = 1, .bp1 = 1, .bp2 = 1, .bp3 = 1 + }; + struct crisv32_watch_entry *watch; + unsigned arbiter = (unsigned)dev_id; + + masked_intr = REG_RD(marb_foo, regi_marb_foo, r_masked_intr); + + if (masked_intr.bp0) + watch = &watches[arbiter][0]; + else if (masked_intr.bp1) + watch = &watches[arbiter][1]; + else if (masked_intr.bp2) + watch = &watches[arbiter][2]; + else if (masked_intr.bp3) + watch = &watches[arbiter][3]; + else + return IRQ_NONE; + + /* Retrieve all useful information and print it. */ + r_clients = REG_RD(marb_foo_bp, watch->instance, r_brk_clients); + r_addr = REG_RD(marb_foo_bp, watch->instance, r_brk_addr); + r_op = REG_RD(marb_foo_bp, watch->instance, r_brk_op); + r_first = REG_RD(marb_foo_bp, watch->instance, r_brk_first_client); + r_size = REG_RD(marb_foo_bp, watch->instance, r_brk_size); + + printk(KERN_DEBUG "Arbiter IRQ\n"); + printk(KERN_DEBUG "Clients %X addr %X op %X first %X size %X\n", + REG_TYPE_CONV(int, reg_marb_foo_bp_r_brk_clients, r_clients), + REG_TYPE_CONV(int, reg_marb_foo_bp_r_brk_addr, r_addr), + REG_TYPE_CONV(int, reg_marb_foo_bp_r_brk_op, r_op), + REG_TYPE_CONV(int, reg_marb_foo_bp_r_brk_first_client, r_first), + REG_TYPE_CONV(int, reg_marb_foo_bp_r_brk_size, r_size)); + + REG_WR(marb_foo_bp, watch->instance, rw_ack, ack); + REG_WR(marb_foo, regi_marb_foo, rw_ack_intr, ack_intr); + + printk(KERN_DEBUG "IRQ occured at %X\n", (unsigned)get_irq_regs()); + + if (watch->cb) + watch->cb(); + + return IRQ_HANDLED; +} + +static irqreturn_t +crisv32_bar_arbiter_irq(int irq, void *dev_id) +{ + reg_marb_bar_r_masked_intr masked_intr = + REG_RD(marb_bar, regi_marb_bar, r_masked_intr); + reg_marb_bar_bp_r_brk_clients r_clients; + reg_marb_bar_bp_r_brk_addr r_addr; + reg_marb_bar_bp_r_brk_op r_op; + reg_marb_bar_bp_r_brk_first_client r_first; + reg_marb_bar_bp_r_brk_size r_size; + reg_marb_bar_bp_rw_ack ack = {0}; + reg_marb_bar_rw_ack_intr ack_intr = { + .bp0 = 1, .bp1 = 1, .bp2 = 1, .bp3 = 1 + }; + struct crisv32_watch_entry *watch; + unsigned arbiter = (unsigned)dev_id; + + masked_intr = REG_RD(marb_bar, regi_marb_bar, r_masked_intr); + + if (masked_intr.bp0) + watch = &watches[arbiter][0]; + else if (masked_intr.bp1) + watch = &watches[arbiter][1]; + else if (masked_intr.bp2) + watch = &watches[arbiter][2]; + else if (masked_intr.bp3) + watch = &watches[arbiter][3]; + else + return IRQ_NONE; + + /* Retrieve all useful information and print it. */ + r_clients = REG_RD(marb_bar_bp, watch->instance, r_brk_clients); + r_addr = REG_RD(marb_bar_bp, watch->instance, r_brk_addr); + r_op = REG_RD(marb_bar_bp, watch->instance, r_brk_op); + r_first = REG_RD(marb_bar_bp, watch->instance, r_brk_first_client); + r_size = REG_RD(marb_bar_bp, watch->instance, r_brk_size); + + printk(KERN_DEBUG "Arbiter IRQ\n"); + printk(KERN_DEBUG "Clients %X addr %X op %X first %X size %X\n", + REG_TYPE_CONV(int, reg_marb_bar_bp_r_brk_clients, r_clients), + REG_TYPE_CONV(int, reg_marb_bar_bp_r_brk_addr, r_addr), + REG_TYPE_CONV(int, reg_marb_bar_bp_r_brk_op, r_op), + REG_TYPE_CONV(int, reg_marb_bar_bp_r_brk_first_client, r_first), + REG_TYPE_CONV(int, reg_marb_bar_bp_r_brk_size, r_size)); + + REG_WR(marb_bar_bp, watch->instance, rw_ack, ack); + REG_WR(marb_bar, regi_marb_bar, rw_ack_intr, ack_intr); + + printk(KERN_DEBUG "IRQ occured at %X\n", (unsigned)get_irq_regs()->erp); + + if (watch->cb) + watch->cb(); + + return IRQ_HANDLED; +} + diff --git a/arch/cris/arch-v32/mach-a3/cpufreq.c b/arch/cris/arch-v32/mach-a3/cpufreq.c new file mode 100644 index 000000000000..8e5a3cab8ad7 --- /dev/null +++ b/arch/cris/arch-v32/mach-a3/cpufreq.c @@ -0,0 +1,153 @@ +#include <linux/init.h> +#include <linux/module.h> +#include <linux/cpufreq.h> +#include <hwregs/reg_map.h> +#include <hwregs/reg_rdwr.h> +#include <hwregs/clkgen_defs.h> +#include <hwregs/ddr2_defs.h> + +static int +cris_sdram_freq_notifier(struct notifier_block *nb, unsigned long val, + void *data); + +static struct notifier_block cris_sdram_freq_notifier_block = { + .notifier_call = cris_sdram_freq_notifier +}; + +static struct cpufreq_frequency_table cris_freq_table[] = { + {0x01, 6000}, + {0x02, 200000}, + {0, CPUFREQ_TABLE_END}, +}; + +static unsigned int cris_freq_get_cpu_frequency(unsigned int cpu) +{ + reg_clkgen_rw_clk_ctrl clk_ctrl; + clk_ctrl = REG_RD(clkgen, regi_clkgen, rw_clk_ctrl); + return clk_ctrl.pll ? 200000 : 6000; +} + +static void cris_freq_set_cpu_state(unsigned int state) +{ + int i = 0; + struct cpufreq_freqs freqs; + reg_clkgen_rw_clk_ctrl clk_ctrl; + clk_ctrl = REG_RD(clkgen, regi_clkgen, rw_clk_ctrl); + +#ifdef CONFIG_SMP + for_each_present_cpu(i) +#endif + { + freqs.old = cris_freq_get_cpu_frequency(i); + freqs.new = cris_freq_table[state].frequency; + freqs.cpu = i; + } + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + local_irq_disable(); + + /* Even though we may be SMP they will share the same clock + * so all settings are made on CPU0. */ + if (cris_freq_table[state].frequency == 200000) + clk_ctrl.pll = 1; + else + clk_ctrl.pll = 0; + REG_WR(clkgen, regi_clkgen, rw_clk_ctrl, clk_ctrl); + + local_irq_enable(); + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); +}; + +static int cris_freq_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, &cris_freq_table[0]); +} + +static int cris_freq_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned int newstate = 0; + + if (cpufreq_frequency_table_target(policy, cris_freq_table, + target_freq, relation, &newstate)) + return -EINVAL; + + cris_freq_set_cpu_state(newstate); + + return 0; +} + +static int cris_freq_cpu_init(struct cpufreq_policy *policy) +{ + int result; + + /* cpuinfo and default policy values */ + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->cpuinfo.transition_latency = 1000000; /* 1ms */ + policy->cur = cris_freq_get_cpu_frequency(0); + + result = cpufreq_frequency_table_cpuinfo(policy, cris_freq_table); + if (result) + return (result); + + cpufreq_frequency_table_get_attr(cris_freq_table, policy->cpu); + + return 0; +} + + +static int cris_freq_cpu_exit(struct cpufreq_policy *policy) +{ + cpufreq_frequency_table_put_attr(policy->cpu); + return 0; +} + + +static struct freq_attr *cris_freq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver cris_freq_driver = { + .get = cris_freq_get_cpu_frequency, + .verify = cris_freq_verify, + .target = cris_freq_target, + .init = cris_freq_cpu_init, + .exit = cris_freq_cpu_exit, + .name = "cris_freq", + .owner = THIS_MODULE, + .attr = cris_freq_attr, +}; + +static int __init cris_freq_init(void) +{ + int ret; + ret = cpufreq_register_driver(&cris_freq_driver); + cpufreq_register_notifier(&cris_sdram_freq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); + return ret; +} + +static int +cris_sdram_freq_notifier(struct notifier_block *nb, unsigned long val, + void *data) +{ + int i; + struct cpufreq_freqs *freqs = data; + if (val == CPUFREQ_PRECHANGE) { + reg_ddr2_rw_cfg cfg = + REG_RD(ddr2, regi_ddr2_ctrl, rw_cfg); + cfg.ref_interval = (freqs->new == 200000 ? 1560 : 46); + + if (freqs->new == 200000) + for (i = 0; i < 50000; i++); + REG_WR(bif_core, regi_bif_core, rw_sdram_timing, timing); + } + return 0; +} + + +module_init(cris_freq_init); diff --git a/arch/cris/arch-v32/mach-a3/dma.c b/arch/cris/arch-v32/mach-a3/dma.c new file mode 100644 index 000000000000..25f236ef0b81 --- /dev/null +++ b/arch/cris/arch-v32/mach-a3/dma.c @@ -0,0 +1,185 @@ +/* Wrapper for DMA channel allocator that starts clocks etc */ + +#include <linux/kernel.h> +#include <linux/spinlock.h> +#include <asm/arch/mach/dma.h> +#include <hwregs/reg_map.h> +#include <hwregs/reg_rdwr.h> +#include <hwregs/marb_defs.h> +#include <hwregs/clkgen_defs.h> +#include <hwregs/strmux_defs.h> +#include <linux/errno.h> +#include <asm/system.h> +#include <arbiter.h> + +static char used_dma_channels[MAX_DMA_CHANNELS]; +static const char *used_dma_channels_users[MAX_DMA_CHANNELS]; + +static DEFINE_SPINLOCK(dma_lock); + +int crisv32_request_dma(unsigned int dmanr, const char *device_id, + unsigned options, unsigned int bandwidth, enum dma_owner owner) +{ + unsigned long flags; + reg_clkgen_rw_clk_ctrl clk_ctrl; + reg_strmux_rw_cfg strmux_cfg; + + if (crisv32_arbiter_allocate_bandwidth(dmanr, + options & DMA_INT_MEM ? INT_REGION : EXT_REGION, + bandwidth)) + return -ENOMEM; + + spin_lock_irqsave(&dma_lock, flags); + + if (used_dma_channels[dmanr]) { + spin_unlock_irqrestore(&dma_lock, flags); + if (options & DMA_VERBOSE_ON_ERROR) + printk(KERN_ERR "Failed to request DMA %i for %s, " + "already allocated by %s\n", + dmanr, + device_id, + used_dma_channels_users[dmanr]); + + if (options & DMA_PANIC_ON_ERROR) + panic("request_dma error!"); + spin_unlock_irqrestore(&dma_lock, flags); + return -EBUSY; + } + clk_ctrl = REG_RD(clkgen, regi_clkgen, rw_clk_ctrl); + strmux_cfg = REG_RD(strmux, regi_strmux, rw_cfg); + + switch (dmanr) { + case 0: + case 1: + clk_ctrl.dma0_1_eth = 1; + break; + case 2: + case 3: + clk_ctrl.dma2_3_strcop = 1; + break; + case 4: + case 5: + clk_ctrl.dma4_5_iop = 1; + break; + case 6: + case 7: + clk_ctrl.sser_ser_dma6_7 = 1; + break; + case 9: + case 11: + clk_ctrl.dma9_11 = 1; + break; +#if MAX_DMA_CHANNELS-1 != 11 +#error Check dma.c +#endif + default: + spin_unlock_irqrestore(&dma_lock, flags); + if (options & DMA_VERBOSE_ON_ERROR) + printk(KERN_ERR "Failed to request DMA %i for %s, " + "only 0-%i valid)\n", + dmanr, device_id, MAX_DMA_CHANNELS-1); + + if (options & DMA_PANIC_ON_ERROR) + panic("request_dma error!"); + return -EINVAL; + } + + switch (owner) { + case dma_eth: + if (dmanr == 0) + strmux_cfg.dma0 = regk_strmux_eth; + else if (dmanr == 1) + strmux_cfg.dma1 = regk_strmux_eth; + else + panic("Invalid DMA channel for eth\n"); + break; + case dma_ser0: + if (dmanr == 0) + strmux_cfg.dma0 = regk_strmux_ser0; + else if (dmanr == 1) + strmux_cfg.dma1 = regk_strmux_ser0; + else + panic("Invalid DMA channel for ser0\n"); + break; + case dma_ser3: + if (dmanr == 2) + strmux_cfg.dma2 = regk_strmux_ser3; + else if (dmanr == 3) + strmux_cfg.dma3 = regk_strmux_ser3; + else + panic("Invalid DMA channel for ser3\n"); + break; + case dma_strp: + if (dmanr == 2) + strmux_cfg.dma2 = regk_strmux_strcop; + else if (dmanr == 3) + strmux_cfg.dma3 = regk_strmux_strcop; + else + panic("Invalid DMA channel for strp\n"); + break; + case dma_ser1: + if (dmanr == 4) + strmux_cfg.dma4 = regk_strmux_ser1; + else if (dmanr == 5) + strmux_cfg.dma5 = regk_strmux_ser1; + else + panic("Invalid DMA channel for ser1\n"); + break; + case dma_iop: + if (dmanr == 4) + strmux_cfg.dma4 = regk_strmux_iop; + else if (dmanr == 5) + strmux_cfg.dma5 = regk_strmux_iop; + else + panic("Invalid DMA channel for iop\n"); + break; + case dma_ser2: + if (dmanr == 6) + strmux_cfg.dma6 = regk_strmux_ser2; + else if (dmanr == 7) + strmux_cfg.dma7 = regk_strmux_ser2; + else + panic("Invalid DMA channel for ser2\n"); + break; + case dma_sser: + if (dmanr == 6) + strmux_cfg.dma6 = regk_strmux_sser; + else if (dmanr == 7) + strmux_cfg.dma7 = regk_strmux_sser; + else + panic("Invalid DMA channel for sser\n"); + break; + case dma_ser4: + if (dmanr == 9) + strmux_cfg.dma9 = regk_strmux_ser4; + else + panic("Invalid DMA channel for ser4\n"); + break; + case dma_jpeg: + if (dmanr == 9) + strmux_cfg.dma9 = regk_strmux_jpeg; + else + panic("Invalid DMA channel for JPEG\n"); + break; + case dma_h264: + if (dmanr == 11) + strmux_cfg.dma11 = regk_strmux_h264; + else + panic("Invalid DMA channel for H264\n"); + break; + } + + used_dma_channels[dmanr] = 1; + used_dma_channels_users[dmanr] = device_id; + REG_WR(clkgen, regi_clkgen, rw_clk_ctrl, clk_ctrl); + REG_WR(strmux, regi_strmux, rw_cfg, strmux_cfg); + spin_unlock_irqrestore(&dma_lock, flags); + return 0; +} + +void crisv32_free_dma(unsigned int dmanr) +{ + spin_lock(&dma_lock); + used_dma_channels[dmanr] = 0; + spin_unlock(&dma_lock); +} diff --git a/arch/cris/arch-v32/mach-a3/dram_init.S b/arch/cris/arch-v32/mach-a3/dram_init.S new file mode 100644 index 000000000000..94d6b41cb299 --- /dev/null +++ b/arch/cris/arch-v32/mach-a3/dram_init.S @@ -0,0 +1,104 @@ +/* + * DDR SDRAM initialization - alter with care + * This file is intended to be included from other assembler files + * + * Note: This file may not modify r8 or r9 because they are used to + * carry information from the decompresser to the kernel + * + * Copyright (C) 2005-2007 Axis Communications AB + * + * Authors: Mikael Starvik <starvik@axis.com> + */ + +/* Just to be certain the config file is included, we include it here + * explicitely instead of depending on it being included in the file that + * uses this code. + */ + +#include <hwregs/asm/reg_map_asm.h> +#include <hwregs/asm/ddr2_defs_asm.h> + + ;; WARNING! The registers r8 and r9 are used as parameters carrying + ;; information from the decompressor (if the kernel was compressed). + ;; They should not be used in the code below. + + ;; Refer to ddr2 MDS for initialization sequence + + ; Start clock + move.d REG_ADDR(ddr2, regi_ddr2_ctrl, rw_phy_cfg), $r0 + move.d REG_STATE(ddr2, rw_phy_cfg, en, yes), $r1 + move.d $r1, [$r0] + + ; Reset phy and start calibration + move.d REG_ADDR(ddr2, regi_ddr2_ctrl, rw_phy_ctrl), $r0 + move.d REG_STATE(ddr2, rw_phy_ctrl, rst, yes) | \ + REG_STATE(ddr2, rw_phy_ctrl, cal_rst, yes), $r1 + move.d $r1, [$r0] + move.d REG_STATE(ddr2, rw_phy_ctrl, cal_start, yes), $r1 + move.d $r1, [$r0] + + ; 2. Wait 200us + move.d 10000, $r2 +1: bne 1b + subq 1, $r2 + + ; Issue commands + move.d REG_ADDR(ddr2, regi_ddr2_ctrl, rw_ctrl), $r0 + move.d sdram_commands_start, $r2 +command_loop: + movu.b [$r2+], $r1 + movu.w [$r2+], $r3 +do_cmd: + lslq 16, $r1 + or.d $r3, $r1 + move.d $r1, [$r0] + cmp.d sdram_commands_end, $r2 + blo command_loop + nop + + ; Set timing + move.d REG_ADDR(ddr2, regi_ddr2_ctrl, rw_timing), $r0 + move.d CONFIG_ETRAX_DDR2_TIMING, $r1 + move.d $r1, [$r0] + + ; Set latency + move.d REG_ADDR(ddr2, regi_ddr2_ctrl, rw_latency), $r0 + move.d 0x13, $r1 + move.d $r1, [$r0] + + ; Set configuration + move.d REG_ADDR(ddr2, regi_ddr2_ctrl, rw_cfg), $r0 + move.d CONFIG_ETRAX_DDR2_CONFIG, $r1 + move.d $r1, [$r0] + + ba after_sdram_commands + nop + +sdram_commands_start: + .byte regk_ddr2_deselect + .word 0 + .byte regk_ddr2_pre + .word regk_ddr2_pre_all + .byte regk_ddr2_emrs2 + .word 0 + .byte regk_ddr2_emrs3 + .word 0 + .byte regk_ddr2_emrs + .word regk_ddr2_dll_en + .byte regk_ddr2_mrs + .word regk_ddr2_dll_rst + .byte regk_ddr2_pre + .word regk_ddr2_pre_all + .byte regk_ddr2_ref + .word 0 + .byte regk_ddr2_ref + .word 0 + .byte regk_ddr2_mrs + .word CONFIG_ETRAX_DDR2_MRS & 0xffff + .byte regk_ddr2_emrs + .word regk_ddr2_ocd_default | regk_ddr2_dll_en + .byte regk_ddr2_emrs + .word regk_ddr2_ocd_exit | regk_ddr2_dll_en | (CONFIG_ETRAX_DDR2_MRS >> 16) +sdram_commands_end: + .align 1 +after_sdram_commands: diff --git a/arch/cris/arch-v32/mach-a3/hw_settings.S b/arch/cris/arch-v32/mach-a3/hw_settings.S new file mode 100644 index 000000000000..258a6329cd4a --- /dev/null +++ b/arch/cris/arch-v32/mach-a3/hw_settings.S @@ -0,0 +1,51 @@ +/* + * This table is used by some tools to extract hardware parameters. + * The table should be included in the kernel and the decompressor. + * Don't forget to update the tools if you change this table. + * + * Copyright (C) 2001-2007 Axis Communications AB + * + * Authors: Mikael Starvik <starvik@axis.com> + */ + +#include <hwregs/asm/reg_map_asm.h> +#include <hwregs/asm/ddr2_defs_asm.h> +#include <hwregs/asm/gio_defs_asm.h> + + .ascii "HW_PARAM_MAGIC" ; Magic number + .dword 0xc0004000 ; Kernel start address + + ; Debug port +#ifdef CONFIG_ETRAX_DEBUG_PORT0 + .dword 0 +#elif defined(CONFIG_ETRAX_DEBUG_PORT1) + .dword 1 +#elif defined(CONFIG_ETRAX_DEBUG_PORT2) + .dword 2 +#elif defined(CONFIG_ETRAX_DEBUG_PORT3) + .dword 3 +#else + .dword 4 ; No debug +#endif + + ; Register values + .dword REG_ADDR(ddr2, regi_ddr2_ctrl, rw_cfg) + .dword CONFIG_ETRAX_DDR2_CONFIG + .dword REG_ADDR(ddr2, regi_ddr2_ctrl, rw_timing) + .dword CONFIG_ETRAX_DDR2_TIMING + .dword CONFIG_ETRAX_DDR2_MRS + + .dword REG_ADDR(gio, regi_gio, rw_pa_dout) + .dword CONFIG_ETRAX_DEF_GIO_PA_OUT + .dword REG_ADDR(gio, regi_gio, rw_pa_oe) + .dword CONFIG_ETRAX_DEF_GIO_PA_OE + .dword REG_ADDR(gio, regi_gio, rw_pb_dout) + .dword CONFIG_ETRAX_DEF_GIO_PB_OUT + .dword REG_ADDR(gio, regi_gio, rw_pb_oe) + .dword CONFIG_ETRAX_DEF_GIO_PB_OE + .dword REG_ADDR(gio, regi_gio, rw_pc_dout) + .dword CONFIG_ETRAX_DEF_GIO_PC_OUT + .dword REG_ADDR(gio, regi_gio, rw_pc_oe) + .dword CONFIG_ETRAX_DEF_GIO_PC_OE + + .dword 0 ; No more register values diff --git a/arch/cris/arch-v32/mach-a3/io.c b/arch/cris/arch-v32/mach-a3/io.c new file mode 100644 index 000000000000..9eeaf3eca474 --- /dev/null +++ b/arch/cris/arch-v32/mach-a3/io.c @@ -0,0 +1,149 @@ +/* + * Helper functions for I/O pins. + * + * Copyright (c) 2005-2007 Axis Communications AB. + */ + +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/string.h> +#include <linux/ctype.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <asm/io.h> +#include <asm/arch/mach/pinmux.h> +#include <hwregs/gio_defs.h> + +struct crisv32_ioport crisv32_ioports[] = { + { + (unsigned long *)REG_ADDR(gio, regi_gio, rw_pa_oe), + (unsigned long *)REG_ADDR(gio, regi_gio, rw_pa_dout), + (unsigned long *)REG_ADDR(gio, regi_gio, r_pa_din), + 32 + }, + { + (unsigned long *)REG_ADDR(gio, regi_gio, rw_pb_oe), + (unsigned long *)REG_ADDR(gio, regi_gio, rw_pb_dout), + (unsigned long *)REG_ADDR(gio, regi_gio, r_pb_din), + 32 + }, + { + (unsigned long *)REG_ADDR(gio, regi_gio, rw_pc_oe), + (unsigned long *)REG_ADDR(gio, regi_gio, rw_pc_dout), + (unsigned long *)REG_ADDR(gio, regi_gio, r_pc_din), + 16 + }, +}; + +#define NBR_OF_PORTS sizeof(crisv32_ioports)/sizeof(struct crisv32_ioport) + +struct crisv32_iopin crisv32_led_net0_green; +struct crisv32_iopin crisv32_led_net0_red; +struct crisv32_iopin crisv32_led2_green; +struct crisv32_iopin crisv32_led2_red; +struct crisv32_iopin crisv32_led3_green; +struct crisv32_iopin crisv32_led3_red; + +/* Dummy port used when green LED and red LED is on the same bit */ +static unsigned long io_dummy; +static struct crisv32_ioport dummy_port = { + &io_dummy, + &io_dummy, + &io_dummy, + 32 +}; +static struct crisv32_iopin dummy_led = { + &dummy_port, + 0 +}; + +static int __init crisv32_io_init(void) +{ + int ret = 0; + + u32 i; + + /* Locks *should* be dynamically initialized. */ + for (i = 0; i < ARRAY_SIZE(crisv32_ioports); i++) + spin_lock_init(&crisv32_ioports[i].lock); + spin_lock_init(&dummy_port.lock); + + /* Initialize LEDs */ +#if (defined(CONFIG_ETRAX_NBR_LED_GRP_ONE) || defined(CONFIG_ETRAX_NBR_LED_GRP_TWO)) + ret += crisv32_io_get_name(&crisv32_led_net0_green, + CONFIG_ETRAX_LED_G_NET0); + crisv32_io_set_dir(&crisv32_led_net0_green, crisv32_io_dir_out); + if (strcmp(CONFIG_ETRAX_LED_G_NET0, CONFIG_ETRAX_LED_R_NET0)) { + ret += crisv32_io_get_name(&crisv32_led_net0_red, + CONFIG_ETRAX_LED_R_NET0); + crisv32_io_set_dir(&crisv32_led_net0_red, crisv32_io_dir_out); + } else + crisv32_led_net0_red = dummy_led; +#endif + + ret += crisv32_io_get_name(&crisv32_led2_green, CONFIG_ETRAX_V32_LED2G); + ret += crisv32_io_get_name(&crisv32_led2_red, CONFIG_ETRAX_V32_LED2R); + ret += crisv32_io_get_name(&crisv32_led3_green, CONFIG_ETRAX_V32_LED3G); + ret += crisv32_io_get_name(&crisv32_led3_red, CONFIG_ETRAX_V32_LED3R); + + crisv32_io_set_dir(&crisv32_led2_green, crisv32_io_dir_out); + crisv32_io_set_dir(&crisv32_led2_red, crisv32_io_dir_out); + crisv32_io_set_dir(&crisv32_led3_green, crisv32_io_dir_out); + crisv32_io_set_dir(&crisv32_led3_red, crisv32_io_dir_out); + + return ret; +} + +__initcall(crisv32_io_init); + +int crisv32_io_get(struct crisv32_iopin *iopin, + unsigned int port, unsigned int pin) +{ + if (port > NBR_OF_PORTS) + return -EINVAL; + if (port > crisv32_ioports[port].pin_count) + return -EINVAL; + + iopin->bit = 1 << pin; + iopin->port = &crisv32_ioports[port]; + + if (crisv32_pinmux_alloc(port, pin, pin, pinmux_gpio)) + return -EIO; + + return 0; +} + +int crisv32_io_get_name(struct crisv32_iopin *iopin, const char *name) +{ + int port; + int pin; + + if (toupper(*name) == 'P') + name++; + + if (toupper(*name) < 'A' || toupper(*name) > 'E') + return -EINVAL; + + port = toupper(*name) - 'A'; + name++; + pin = simple_strtoul(name, NULL, 10); + + if (pin < 0 || pin > crisv32_ioports[port].pin_count) + return -EINVAL; + + iopin->bit = 1 << pin; + iopin->port = &crisv32_ioports[port]; + + if (crisv32_pinmux_alloc(port, pin, pin, pinmux_gpio)) + return -EIO; + + return 0; +} + +#ifdef CONFIG_PCI +/* PCI I/O access stuff */ +struct cris_io_operations *cris_iops = NULL; +EXPORT_SYMBOL(cris_iops); +#endif + diff --git a/arch/cris/arch-v32/mach-a3/pinmux.c b/arch/cris/arch-v32/mach-a3/pinmux.c new file mode 100644 index 000000000000..0a28c9bedfb7 --- /dev/null +++ b/arch/cris/arch-v32/mach-a3/pinmux.c @@ -0,0 +1,386 @@ +/* + * Allocator for I/O pins. All pins are allocated to GPIO at bootup. + * Unassigned pins and GPIO pins can be allocated to a fixed interface + * or the I/O processor instead. + * + * Copyright (c) 2005-2007 Axis Communications AB. + */ + +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/spinlock.h> +#include <hwregs/reg_map.h> +#include <hwregs/reg_rdwr.h> +#include <pinmux.h> +#include <hwregs/pinmux_defs.h> +#include <hwregs/clkgen_defs.h> + +#undef DEBUG + +#define PINS 80 +#define PORT_PINS 32 +#define PORTS 3 + +static char pins[PINS]; +static DEFINE_SPINLOCK(pinmux_lock); + +static void crisv32_pinmux_set(int port); + +int +crisv32_pinmux_init(void) +{ + static int initialized; + + if (!initialized) { + initialized = 1; + REG_WR_INT(pinmux, regi_pinmux, rw_hwprot, 0); + crisv32_pinmux_alloc(PORT_A, 0, 31, pinmux_gpio); + crisv32_pinmux_alloc(PORT_B, 0, 31, pinmux_gpio); + crisv32_pinmux_alloc(PORT_C, 0, 15, pinmux_gpio); + } + + return 0; +} + +int +crisv32_pinmux_alloc(int port, int first_pin, int last_pin, enum pin_mode mode) +{ + int i; + unsigned long flags; + + crisv32_pinmux_init(); + + if (port >= PORTS) + return -EINVAL; + + spin_lock_irqsave(&pinmux_lock, flags); + + for (i = first_pin; i <= last_pin; i++) { + if ((pins[port * PORT_PINS + i] != pinmux_none) && + (pins[port * PORT_PINS + i] != pinmux_gpio) && + (pins[port * PORT_PINS + i] != mode)) { + spin_unlock_irqrestore(&pinmux_lock, flags); +#ifdef DEBUG + panic("Pinmux alloc failed!\n"); +#endif + return -EPERM; + } + } + + for (i = first_pin; i <= last_pin; i++) + pins[port * PORT_PINS + i] = mode; + + crisv32_pinmux_set(port); + + spin_unlock_irqrestore(&pinmux_lock, flags); + + return 0; +} + +int +crisv32_pinmux_alloc_fixed(enum fixed_function function) +{ + int ret = -EINVAL; + char saved[sizeof pins]; + unsigned long flags; + + spin_lock_irqsave(&pinmux_lock, flags); + + /* Save internal data for recovery */ + memcpy(saved, pins, sizeof pins); + + crisv32_pinmux_init(); /* must be done before we read rw_hwprot */ + + reg_pinmux_rw_hwprot hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot); + reg_clkgen_rw_clk_ctrl clk_ctrl = REG_RD(clkgen, regi_clkgen, + rw_clk_ctrl); + + switch (function) { + case pinmux_eth: + clk_ctrl.eth = regk_clkgen_yes; + clk_ctrl.dma0_1_eth = regk_clkgen_yes; + ret = crisv32_pinmux_alloc(PORT_B, 8, 23, pinmux_fixed); + ret |= crisv32_pinmux_alloc(PORT_B, 24, 25, pinmux_fixed); + hwprot.eth = hwprot.eth_mdio = regk_pinmux_yes; + break; + case pinmux_geth: + ret = crisv32_pinmux_alloc(PORT_B, 0, 7, pinmux_fixed); + hwprot.geth = regk_pinmux_yes; + break; + case pinmux_tg_cmos: + clk_ctrl.ccd_tg_100 = clk_ctrl.ccd_tg_200 = regk_clkgen_yes; + ret = crisv32_pinmux_alloc(PORT_B, 27, 29, pinmux_fixed); + hwprot.tg_clk = regk_pinmux_yes; + break; + case pinmux_tg_ccd: + clk_ctrl.ccd_tg_100 = clk_ctrl.ccd_tg_200 = regk_clkgen_yes; + ret = crisv32_pinmux_alloc(PORT_B, 27, 31, pinmux_fixed); + ret |= crisv32_pinmux_alloc(PORT_C, 0, 15, pinmux_fixed); + hwprot.tg = hwprot.tg_clk = regk_pinmux_yes; + break; + case pinmux_vout: + clk_ctrl.strdma0_2_video = regk_clkgen_yes; + ret = crisv32_pinmux_alloc(PORT_A, 8, 18, pinmux_fixed); + hwprot.vout = hwprot.vout_sync = regk_pinmux_yes; + break; + case pinmux_ser1: + clk_ctrl.sser_ser_dma6_7 = regk_clkgen_yes; + ret = crisv32_pinmux_alloc(PORT_A, 24, 25, pinmux_fixed); + hwprot.ser1 = regk_pinmux_yes; + break; + case pinmux_ser2: + clk_ctrl.sser_ser_dma6_7 = regk_clkgen_yes; + ret = crisv32_pinmux_alloc(PORT_A, 26, 27, pinmux_fixed); + hwprot.ser2 = regk_pinmux_yes; + break; + case pinmux_ser3: + clk_ctrl.sser_ser_dma6_7 = regk_clkgen_yes; + ret = crisv32_pinmux_alloc(PORT_A, 28, 29, pinmux_fixed); + hwprot.ser3 = regk_pinmux_yes; + break; + case pinmux_ser4: + clk_ctrl.sser_ser_dma6_7 = regk_clkgen_yes; + ret = crisv32_pinmux_alloc(PORT_A, 30, 31, pinmux_fixed); + hwprot.ser4 = regk_pinmux_yes; + break; + case pinmux_sser: + clk_ctrl.sser_ser_dma6_7 = regk_clkgen_yes; + ret = crisv32_pinmux_alloc(PORT_A, 19, 23, pinmux_fixed); + hwprot.sser = regk_pinmux_yes; + break; + case pinmux_pio: + hwprot.pio = regk_pinmux_yes; + ret = 0; + break; + case pinmux_pwm0: + ret = crisv32_pinmux_alloc(PORT_A, 30, 30, pinmux_fixed); + hwprot.pwm0 = regk_pinmux_yes; + break; + case pinmux_pwm1: + ret = crisv32_pinmux_alloc(PORT_A, 31, 31, pinmux_fixed); + hwprot.pwm1 = regk_pinmux_yes; + break; + case pinmux_pwm2: + ret = crisv32_pinmux_alloc(PORT_B, 26, 26, pinmux_fixed); + hwprot.pwm2 = regk_pinmux_yes; + break; + case pinmux_i2c0: + ret = crisv32_pinmux_alloc(PORT_A, 0, 1, pinmux_fixed); + hwprot.i2c0 = regk_pinmux_yes; + break; + case pinmux_i2c1: + ret = crisv32_pinmux_alloc(PORT_A, 2, 3, pinmux_fixed); + hwprot.i2c1 = regk_pinmux_yes; + break; + case pinmux_i2c1_3wire: + ret = crisv32_pinmux_alloc(PORT_A, 2, 3, pinmux_fixed); + ret |= crisv32_pinmux_alloc(PORT_A, 7, 7, pinmux_fixed); + hwprot.i2c1 = hwprot.i2c1_sen = regk_pinmux_yes; + break; + case pinmux_i2c1_sda1: + ret = crisv32_pinmux_alloc(PORT_A, 2, 4, pinmux_fixed); + hwprot.i2c1 = hwprot.i2c1_sda1 = regk_pinmux_yes; + break; + case pinmux_i2c1_sda2: + ret = crisv32_pinmux_alloc(PORT_A, 2, 3, pinmux_fixed); + ret |= crisv32_pinmux_alloc(PORT_A, 5, 5, pinmux_fixed); + hwprot.i2c1 = hwprot.i2c1_sda2 = regk_pinmux_yes; + break; + case pinmux_i2c1_sda3: + ret = crisv32_pinmux_alloc(PORT_A, 2, 3, pinmux_fixed); + ret |= crisv32_pinmux_alloc(PORT_A, 6, 6, pinmux_fixed); + hwprot.i2c1 = hwprot.i2c1_sda3 = regk_pinmux_yes; + break; + default: + ret = -EINVAL; + break; + } + + if (!ret) { + REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot); + REG_WR(clkgen, regi_clkgen, rw_clk_ctrl, clk_ctrl); + } else + memcpy(pins, saved, sizeof pins); + + spin_unlock_irqrestore(&pinmux_lock, flags); + + return ret; +} + +void +crisv32_pinmux_set(int port) +{ + int i; + int gpio_val = 0; + int iop_val = 0; + int pin = port * PORT_PINS; + + for (i = 0; (i < PORT_PINS) && (pin < PINS); i++, pin++) { + if (pins[pin] == pinmux_gpio) + gpio_val |= (1 << i); + else if (pins[pin] == pinmux_iop) + iop_val |= (1 << i); + } + + REG_WRITE(int, regi_pinmux + REG_RD_ADDR_pinmux_rw_gio_pa + 4 * port, + gpio_val); + REG_WRITE(int, regi_pinmux + REG_RD_ADDR_pinmux_rw_iop_pa + 4 * port, + iop_val); + +#ifdef DEBUG + crisv32_pinmux_dump(); +#endif +} + +int +crisv32_pinmux_dealloc(int port, int first_pin, int last_pin) +{ + int i; + unsigned long flags; + + crisv32_pinmux_init(); + + if (port > PORTS) + return -EINVAL; + + spin_lock_irqsave(&pinmux_lock, flags); + + for (i = first_pin; i <= last_pin; i++) + pins[port * PORT_PINS + i] = pinmux_none; + + crisv32_pinmux_set(port); + spin_unlock_irqrestore(&pinmux_lock, flags); + + return 0; +} + +int +crisv32_pinmux_dealloc_fixed(enum fixed_function function) +{ + int ret = -EINVAL; + char saved[sizeof pins]; + unsigned long flags; + + spin_lock_irqsave(&pinmux_lock, flags); + + /* Save internal data for recovery */ + memcpy(saved, pins, sizeof pins); + + crisv32_pinmux_init(); /* must be done before we read rw_hwprot */ + + reg_pinmux_rw_hwprot hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot); + + switch (function) { + case pinmux_eth: + ret = crisv32_pinmux_dealloc(PORT_B, 8, 23); + ret |= crisv32_pinmux_dealloc(PORT_B, 24, 25); + ret |= crisv32_pinmux_dealloc(PORT_B, 0, 7); + hwprot.eth = hwprot.eth_mdio = hwprot.geth = regk_pinmux_no; + break; + case pinmux_tg_cmos: + ret = crisv32_pinmux_dealloc(PORT_B, 27, 29); + hwprot.tg_clk = regk_pinmux_no; + break; + case pinmux_tg_ccd: + ret = crisv32_pinmux_dealloc(PORT_B, 27, 31); + ret |= crisv32_pinmux_dealloc(PORT_C, 0, 15); + hwprot.tg = hwprot.tg_clk = regk_pinmux_no; + break; + case pinmux_vout: + ret = crisv32_pinmux_dealloc(PORT_A, 8, 18); + hwprot.vout = hwprot.vout_sync = regk_pinmux_no; + break; + case pinmux_ser1: + ret = crisv32_pinmux_dealloc(PORT_A, 24, 25); + hwprot.ser1 = regk_pinmux_no; + break; + case pinmux_ser2: + ret = crisv32_pinmux_dealloc(PORT_A, 26, 27); + hwprot.ser2 = regk_pinmux_no; + break; + case pinmux_ser3: + ret = crisv32_pinmux_dealloc(PORT_A, 28, 29); + hwprot.ser3 = regk_pinmux_no; + break; + case pinmux_ser4: + ret = crisv32_pinmux_dealloc(PORT_A, 30, 31); + hwprot.ser4 = regk_pinmux_no; + break; + case pinmux_sser: + ret = crisv32_pinmux_dealloc(PORT_A, 19, 23); + hwprot.sser = regk_pinmux_no; + break; + case pinmux_pwm0: + ret = crisv32_pinmux_dealloc(PORT_A, 30, 30); + hwprot.pwm0 = regk_pinmux_no; + break; + case pinmux_pwm1: + ret = crisv32_pinmux_dealloc(PORT_A, 31, 31); + hwprot.pwm1 = regk_pinmux_no; + break; + case pinmux_pwm2: + ret = crisv32_pinmux_dealloc(PORT_B, 26, 26); + hwprot.pwm2 = regk_pinmux_no; + break; + case pinmux_i2c0: + ret = crisv32_pinmux_dealloc(PORT_A, 0, 1); + hwprot.i2c0 = regk_pinmux_no; + break; + case pinmux_i2c1: + ret = crisv32_pinmux_dealloc(PORT_A, 2, 3); + hwprot.i2c1 = regk_pinmux_no; + break; + case pinmux_i2c1_3wire: + ret = crisv32_pinmux_dealloc(PORT_A, 2, 3); + ret |= crisv32_pinmux_dealloc(PORT_A, 7, 7); + hwprot.i2c1 = hwprot.i2c1_sen = regk_pinmux_no; + break; + case pinmux_i2c1_sda1: + ret = crisv32_pinmux_dealloc(PORT_A, 2, 4); + hwprot.i2c1_sda1 = regk_pinmux_no; + break; + case pinmux_i2c1_sda2: + ret = crisv32_pinmux_dealloc(PORT_A, 2, 3); + ret |= crisv32_pinmux_dealloc(PORT_A, 5, 5); + hwprot.i2c1_sda2 = regk_pinmux_no; + break; + case pinmux_i2c1_sda3: + ret = crisv32_pinmux_dealloc(PORT_A, 2, 3); + ret |= crisv32_pinmux_dealloc(PORT_A, 6, 6); + hwprot.i2c1_sda3 = regk_pinmux_no; + break; + default: + ret = -EINVAL; + break; + } + + if (!ret) + REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot); + else + memcpy(pins, saved, sizeof pins); + + spin_unlock_irqrestore(&pinmux_lock, flags); + + return ret; +} + +void +crisv32_pinmux_dump(void) +{ + int i, j; + int pin = 0; + + crisv32_pinmux_init(); + + for (i = 0; i < PORTS; i++) { + pin++; + printk(KERN_DEBUG "Port %c\n", 'A'+i); + for (j = 0; (j < PORT_PINS) && (pin < PINS); j++, pin++) + printk(KERN_DEBUG + " Pin %d = %d\n", j, pins[i * PORT_PINS + j]); + } +} + +__initcall(crisv32_pinmux_init); diff --git a/arch/cris/arch-v32/mach-a3/vcs_hook.c b/arch/cris/arch-v32/mach-a3/vcs_hook.c new file mode 100644 index 000000000000..58b1a5469fd7 --- /dev/null +++ b/arch/cris/arch-v32/mach-a3/vcs_hook.c @@ -0,0 +1,103 @@ +/* + * Simulator hook mechanism + */ + +#include "vcs_hook.h" +#include <asm/io.h> +#include <stdarg.h> + +#define HOOK_TRIG_ADDR 0xb7000000 +#define HOOK_MEM_BASE_ADDR 0xce000000 + +static volatile unsigned *hook_base; + +#define HOOK_DATA(offset) hook_base[offset] +#define VHOOK_DATA(offset) hook_base[offset] +#define HOOK_TRIG(funcid) \ + do { \ + *((unsigned *) HOOK_TRIG_ADDR) = funcid; \ + } while (0) +#define HOOK_DATA_BYTE(offset) ((unsigned char *)hook_base)[offset] + +static void hook_init(void) +{ + static int first = 1; + if (first) { + first = 0; + hook_base = ioremap(HOOK_MEM_BASE_ADDR, 8192); + } +} + +static unsigned hook_trig(unsigned id) +{ + unsigned ret; + + /* preempt_disable(); */ + + /* Dummy read from mem to make sure data has propagated to memory + * before trigging */ + ret = *hook_base; + + /* trigger hook */ + HOOK_TRIG(id); + + /* wait for call to finish */ + while (VHOOK_DATA(0) > 0) ; + + /* extract return value */ + + ret = VHOOK_DATA(1); + + return ret; +} + +int hook_call(unsigned id, unsigned pcnt, ...) +{ + va_list ap; + int i; + unsigned ret; + + hook_init(); + + HOOK_DATA(0) = id; + + va_start(ap, pcnt); + for (i = 1; i <= pcnt; i++) + HOOK_DATA(i) = va_arg(ap, unsigned); + va_end(ap); + + ret = hook_trig(id); + + return ret; +} + +int hook_call_str(unsigned id, unsigned size, const char *str) +{ + int i; + unsigned ret; + + hook_init(); + + HOOK_DATA(0) = id; + HOOK_DATA(1) = size; + + for (i = 0; i < size; i++) + HOOK_DATA_BYTE(8 + i) = str[i]; + HOOK_DATA_BYTE(8 + i) = 0; + + ret = hook_trig(id); + + return ret; +} + +void print_str(const char *str) +{ + int i; + /* find null at end of string */ + for (i = 1; str[i]; i++) ; + hook_call(hook_print_str, i, str); +} + +void CPU_WATCHDOG_TIMEOUT(unsigned t) +{ +} diff --git a/arch/cris/arch-v32/mach-a3/vcs_hook.h b/arch/cris/arch-v32/mach-a3/vcs_hook.h new file mode 100644 index 000000000000..8b73d0e8392d --- /dev/null +++ b/arch/cris/arch-v32/mach-a3/vcs_hook.h @@ -0,0 +1,58 @@ +/* + * Simulator hook call mechanism + */ + +#ifndef __hook_h__ +#define __hook_h__ + +int hook_call(unsigned id, unsigned pcnt, ...); +int hook_call_str(unsigned id, unsigned size, const char *str); + +enum hook_ids { + hook_debug_on = 1, + hook_debug_off, + hook_stop_sim_ok, + hook_stop_sim_fail, + hook_alloc_shared, + hook_ptr_shared, + hook_free_shared, + hook_file2shared, + hook_cmp_shared, + hook_print_params, + hook_sim_time, + hook_stop_sim, + hook_kick_dog, + hook_dog_timeout, + hook_rand, + hook_srand, + hook_rand_range, + hook_print_str, + hook_print_hex, + hook_cmp_offset_shared, + hook_fill_random_shared, + hook_alloc_random_data, + hook_calloc_random_data, + hook_print_int, + hook_print_uint, + hook_fputc, + hook_init_fd, + hook_sbrk, + hook_print_context_descr, + hook_print_data_descr, + hook_print_group_descr, + hook_fill_shared, + hook_sl_srand, + hook_sl_rand_irange, + hook_sl_rand_urange, + hook_sl_sh_malloc_aligned, + hook_sl_sh_calloc_aligned, + hook_sl_sh_alloc_random_data, + hook_sl_sh_file2mem, + hook_sl_vera_mbox_handle, + hook_sl_vera_mbox_put, + hook_sl_vera_mbox_get, + hook_sl_system, + hook_sl_sh_hexdump +}; + +#endif diff --git a/arch/cris/arch-v32/mach-fs/Kconfig b/arch/cris/arch-v32/mach-fs/Kconfig new file mode 100644 index 000000000000..f6d74475f1c6 --- /dev/null +++ b/arch/cris/arch-v32/mach-fs/Kconfig @@ -0,0 +1,216 @@ +if ETRAXFS + +menu "ETRAX FS options" + depends on ETRAXFS + +config ETRAX_DRAM_VIRTUAL_BASE + hex + depends on ETRAX_ARCH_V32 + default "c0000000" + +config ETRAX_SERIAL_PORTS + int + default 4 + +config ETRAX_MEM_GRP1_CONFIG + hex "MEM_GRP1_CONFIG" + depends on ETRAX_ARCH_V32 + default "4044a" + help + Waitstates for flash. The default value is suitable for the + standard flashes used in axis products (120 ns). + +config ETRAX_MEM_GRP2_CONFIG + hex "MEM_GRP2_CONFIG" + depends on ETRAX_ARCH_V32 + default "0" + help + Waitstates for SRAM. 0 is a good choice for most Axis products. + +config ETRAX_MEM_GRP3_CONFIG + hex "MEM_GRP3_CONFIG" + depends on ETRAX_ARCH_V32 + default "0" + help + Waitstates for CSP0-3. 0 is a good choice for most Axis products. + It may need to be changed if external devices such as extra + register-mapped LEDs are used. + +config ETRAX_MEM_GRP4_CONFIG + hex "MEM_GRP4_CONFIG" + depends on ETRAX_ARCH_V32 + default "0" + help + Waitstates for CSP4-6. 0 is a good choice for most Axis products. + +config ETRAX_SDRAM_GRP0_CONFIG + hex "SDRAM_GRP0_CONFIG" + depends on ETRAX_ARCH_V32 + default "336" + help + SDRAM configuration for group 0. The value depends on the + hardware configuration. The default value is suitable + for 32 MB organized as two 16 bits chips (e.g. Axis + part number 18550) connected as one 32 bit device (i.e. in + the same group). + +config ETRAX_SDRAM_GRP1_CONFIG + hex "SDRAM_GRP1_CONFIG" + depends on ETRAX_ARCH_V32 + default "0" + help + SDRAM configuration for group 1. The defult value is 0 + because group 1 is not used in the default configuration, + described in the help for SDRAM_GRP0_CONFIG. + +config ETRAX_SDRAM_TIMING + hex "SDRAM_TIMING" + depends on ETRAX_ARCH_V32 + default "104a" + help + SDRAM timing parameters. The default value is ok for + most hardwares but large SDRAMs may require a faster + refresh (a.k.a 8K refresh). The default value implies + 100MHz clock and SDR mode. + +config ETRAX_SDRAM_COMMAND + hex "SDRAM_COMMAND" + depends on ETRAX_ARCH_V32 + default "0" + help + SDRAM command. Should be 0 unless you really know what + you are doing (may be != 0 for unusual address line + mappings such as in a MCM).. + +config ETRAX_DEF_GIO_PA_OE + hex "GIO_PA_OE" + depends on ETRAX_ARCH_V32 + default "1c" + help + Configures the direction of general port A bits. 1 is out, 0 is in. + This is often totally different depending on the product used. + There are some guidelines though - if you know that only LED's are + connected to port PA, then they are usually connected to bits 2-4 + and you can therefore use 1c. On other boards which don't have the + LED's at the general ports, these bits are used for all kinds of + stuff. If you don't know what to use, it is always safe to put all + as inputs, although floating inputs isn't good. + +config ETRAX_DEF_GIO_PA_OUT + hex "GIO_PA_OUT" + depends on ETRAX_ARCH_V32 + default "00" + help + Configures the initial data for the general port A bits. Most + products should use 00 here. + +config ETRAX_DEF_GIO_PB_OE + hex "GIO_PB_OE" + depends on ETRAX_ARCH_V32 + default "00000" + help + Configures the direction of general port B bits. 1 is out, 0 is in. + This is often totally different depending on the product used. + There are some guidelines though - if you know that only LED's are + connected to port PA, then they are usually connected to bits 2-4 + and you can therefore use 1c. On other boards which don't have the + LED's at the general ports, these bits are used for all kinds of + stuff. If you don't know what to use, it is always safe to put all + as inputs, although floating inputs isn't good. + +config ETRAX_DEF_GIO_PB_OUT + hex "GIO_PB_OUT" + depends on ETRAX_ARCH_V32 + default "00000" + help + Configures the initial data for the general port B bits. Most + products should use 00000 here. + +config ETRAX_DEF_GIO_PC_OE + hex "GIO_PC_OE" + depends on ETRAX_ARCH_V32 + default "00000" + help + Configures the direction of general port C bits. 1 is out, 0 is in. + This is often totally different depending on the product used. + There are some guidelines though - if you know that only LED's are + connected to port PA, then they are usually connected to bits 2-4 + and you can therefore use 1c. On other boards which don't have the + LED's at the general ports, these bits are used for all kinds of + stuff. If you don't know what to use, it is always safe to put all + as inputs, although floating inputs isn't good. + +config ETRAX_DEF_GIO_PC_OUT + hex "GIO_PC_OUT" + depends on ETRAX_ARCH_V32 + default "00000" + help + Configures the initial data for the general port C bits. Most + products should use 00000 here. + +config ETRAX_DEF_GIO_PD_OE + hex "GIO_PD_OE" + depends on ETRAX_ARCH_V32 + default "00000" + help + Configures the direction of general port D bits. 1 is out, 0 is in. + This is often totally different depending on the product used. + There are some guidelines though - if you know that only LED's are + connected to port PA, then they are usually connected to bits 2-4 + and you can therefore use 1c. On other boards which don't have the + LED's at the general ports, these bits are used for all kinds of + stuff. If you don't know what to use, it is always safe to put all + as inputs, although floating inputs isn't good. + +config ETRAX_DEF_GIO_PD_OUT + hex "GIO_PD_OUT" + depends on ETRAX_ARCH_V32 + default "00000" + help + Configures the initial data for the general port D bits. Most + products should use 00000 here. + +config ETRAX_DEF_GIO_PE_OE + hex "GIO_PE_OE" + depends on ETRAX_ARCH_V32 + default "00000" + help + Configures the direction of general port E bits. 1 is out, 0 is in. + This is often totally different depending on the product used. + There are some guidelines though - if you know that only LED's are + connected to port PA, then they are usually connected to bits 2-4 + and you can therefore use 1c. On other boards which don't have the + LED's at the general ports, these bits are used for all kinds of + stuff. If you don't know what to use, it is always safe to put all + as inputs, although floating inputs isn't good. + +config ETRAX_DEF_GIO_PE_OUT + hex "GIO_PE_OUT" + depends on ETRAX_ARCH_V32 + default "00000" + help + Configures the initial data for the general port E bits. Most + products should use 00000 here. + +config ETRAX_DEF_GIO_PV_OE + hex "GIO_PV_OE" + depends on ETRAX_VIRTUAL_GPIO + default "0000" + help + Configures the direction of virtual general port V bits. 1 is out, + 0 is in. This is often totally different depending on the product + used. These bits are used for all kinds of stuff. If you don't know + what to use, it is always safe to put all as inputs, although + floating inputs isn't good. + +config ETRAX_DEF_GIO_PV_OUT + hex "GIO_PV_OUT" + depends on ETRAX_VIRTUAL_GPIO + default "0000" + help + Configures the initial data for the virtual general port V bits. + Most products should use 0000 here. + +endmenu + +endif diff --git a/arch/cris/arch-v32/mach-fs/Makefile b/arch/cris/arch-v32/mach-fs/Makefile new file mode 100644 index 000000000000..4ff407a1b931 --- /dev/null +++ b/arch/cris/arch-v32/mach-fs/Makefile @@ -0,0 +1,11 @@ +# $Id: Makefile,v 1.3 2007/03/13 11:57:46 starvik Exp $ +# +# Makefile for the linux kernel. +# + +obj-y := dma.o pinmux.o io.o arbiter.o +bj-$(CONFIG_ETRAX_VCS_SIM) += vcs_hook.o +obj-$(CONFIG_CPU_FREQ) += cpufreq.o + +clean: + diff --git a/arch/cris/arch-v32/mach-fs/arbiter.c b/arch/cris/arch-v32/mach-fs/arbiter.c new file mode 100644 index 000000000000..84d31bd7b692 --- /dev/null +++ b/arch/cris/arch-v32/mach-fs/arbiter.c @@ -0,0 +1,404 @@ +/* + * Memory arbiter functions. Allocates bandwidth through the + * arbiter and sets up arbiter breakpoints. + * + * The algorithm first assigns slots to the clients that has specified + * bandwidth (e.g. ethernet) and then the remaining slots are divided + * on all the active clients. + * + * Copyright (c) 2004-2007 Axis Communications AB. + */ + +#include <hwregs/reg_map.h> +#include <hwregs/reg_rdwr.h> +#include <hwregs/marb_defs.h> +#include <arbiter.h> +#include <hwregs/intr_vect.h> +#include <linux/interrupt.h> +#include <linux/signal.h> +#include <linux/errno.h> +#include <linux/spinlock.h> +#include <asm/io.h> +#include <asm/irq_regs.h> + +struct crisv32_watch_entry { + unsigned long instance; + watch_callback *cb; + unsigned long start; + unsigned long end; + int used; +}; + +#define NUMBER_OF_BP 4 +#define NBR_OF_CLIENTS 14 +#define NBR_OF_SLOTS 64 +#define SDRAM_BANDWIDTH 100000000 /* Some kind of expected value */ +#define INTMEM_BANDWIDTH 400000000 +#define NBR_OF_REGIONS 2 + +static struct crisv32_watch_entry watches[NUMBER_OF_BP] = { + {regi_marb_bp0}, + {regi_marb_bp1}, + {regi_marb_bp2}, + {regi_marb_bp3} +}; + +static u8 requested_slots[NBR_OF_REGIONS][NBR_OF_CLIENTS]; +static u8 active_clients[NBR_OF_REGIONS][NBR_OF_CLIENTS]; +static int max_bandwidth[NBR_OF_REGIONS] = + { SDRAM_BANDWIDTH, INTMEM_BANDWIDTH }; + +DEFINE_SPINLOCK(arbiter_lock); + +static irqreturn_t crisv32_arbiter_irq(int irq, void *dev_id); + +/* + * "I'm the arbiter, I know the score. + * From square one I'll be watching all 64." + * (memory arbiter slots, that is) + * + * Or in other words: + * Program the memory arbiter slots for "region" according to what's + * in requested_slots[] and active_clients[], while minimizing + * latency. A caller may pass a non-zero positive amount for + * "unused_slots", which must then be the unallocated, remaining + * number of slots, free to hand out to any client. + */ + +static void crisv32_arbiter_config(int region, int unused_slots) +{ + int slot; + int client; + int interval = 0; + + /* + * This vector corresponds to the hardware arbiter slots (see + * the hardware documentation for semantics). We initialize + * each slot with a suitable sentinel value outside the valid + * range {0 .. NBR_OF_CLIENTS - 1} and replace them with + * client indexes. Then it's fed to the hardware. + */ + s8 val[NBR_OF_SLOTS]; + + for (slot = 0; slot < NBR_OF_SLOTS; slot++) + val[slot] = -1; + + for (client = 0; client < NBR_OF_CLIENTS; client++) { + int pos; + /* Allocate the requested non-zero number of slots, but + * also give clients with zero-requests one slot each + * while stocks last. We do the latter here, in client + * order. This makes sure zero-request clients are the + * first to get to any spare slots, else those slots + * could, when bandwidth is allocated close to the limit, + * all be allocated to low-index non-zero-request clients + * in the default-fill loop below. Another positive but + * secondary effect is a somewhat better spread of the + * zero-bandwidth clients in the vector, avoiding some of + * the latency that could otherwise be caused by the + * partitioning of non-zero-bandwidth clients at low + * indexes and zero-bandwidth clients at high + * indexes. (Note that this spreading can only affect the + * unallocated bandwidth.) All the above only matters for + * memory-intensive situations, of course. + */ + if (!requested_slots[region][client]) { + /* + * Skip inactive clients. Also skip zero-slot + * allocations in this pass when there are no known + * free slots. + */ + if (!active_clients[region][client] + || unused_slots <= 0) + continue; + + unused_slots--; + + /* Only allocate one slot for this client. */ + interval = NBR_OF_SLOTS; + } else + interval = + NBR_OF_SLOTS / requested_slots[region][client]; + + pos = 0; + while (pos < NBR_OF_SLOTS) { + if (val[pos] >= 0) + pos++; + else { + val[pos] = client; + pos += interval; + } + } + } + + client = 0; + for (slot = 0; slot < NBR_OF_SLOTS; slot++) { + /* + * Allocate remaining slots in round-robin + * client-number order for active clients. For this + * pass, we ignore requested bandwidth and previous + * allocations. + */ + if (val[slot] < 0) { + int first = client; + while (!active_clients[region][client]) { + client = (client + 1) % NBR_OF_CLIENTS; + if (client == first) + break; + } + val[slot] = client; + client = (client + 1) % NBR_OF_CLIENTS; + } + if (region == EXT_REGION) + REG_WR_INT_VECT(marb, regi_marb, rw_ext_slots, slot, + val[slot]); + else if (region == INT_REGION) + REG_WR_INT_VECT(marb, regi_marb, rw_int_slots, slot, + val[slot]); + } +} + +extern char _stext, _etext; + +static void crisv32_arbiter_init(void) +{ + static int initialized; + + if (initialized) + return; + + initialized = 1; + + /* + * CPU caches are always set to active, but with zero + * bandwidth allocated. It should be ok to allocate zero + * bandwidth for the caches, because DMA for other channels + * will supposedly finish, once their programmed amount is + * done, and then the caches will get access according to the + * "fixed scheme" for unclaimed slots. Though, if for some + * use-case somewhere, there's a maximum CPU latency for + * e.g. some interrupt, we have to start allocating specific + * bandwidth for the CPU caches too. + */ + active_clients[EXT_REGION][10] = active_clients[EXT_REGION][11] = 1; + crisv32_arbiter_config(EXT_REGION, 0); + crisv32_arbiter_config(INT_REGION, 0); + + if (request_irq(MEMARB_INTR_VECT, crisv32_arbiter_irq, IRQF_DISABLED, + "arbiter", NULL)) + printk(KERN_ERR "Couldn't allocate arbiter IRQ\n"); + +#ifndef CONFIG_ETRAX_KGDB + /* Global watch for writes to kernel text segment. */ + crisv32_arbiter_watch(virt_to_phys(&_stext), &_etext - &_stext, + arbiter_all_clients, arbiter_all_write, NULL); +#endif +} + +/* Main entry for bandwidth allocation. */ + +int crisv32_arbiter_allocate_bandwidth(int client, int region, + unsigned long bandwidth) +{ + int i; + int total_assigned = 0; + int total_clients = 0; + int req; + + crisv32_arbiter_init(); + + for (i = 0; i < NBR_OF_CLIENTS; i++) { + total_assigned += requested_slots[region][i]; + total_clients += active_clients[region][i]; + } + + /* Avoid division by 0 for 0-bandwidth requests. */ + req = bandwidth == 0 + ? 0 : NBR_OF_SLOTS / (max_bandwidth[region] / bandwidth); + + /* + * We make sure that there are enough slots only for non-zero + * requests. Requesting 0 bandwidth *may* allocate slots, + * though if all bandwidth is allocated, such a client won't + * get any and will have to rely on getting memory access + * according to the fixed scheme that's the default when one + * of the slot-allocated clients doesn't claim their slot. + */ + if (total_assigned + req > NBR_OF_SLOTS) + return -ENOMEM; + + active_clients[region][client] = 1; + requested_slots[region][client] = req; + crisv32_arbiter_config(region, NBR_OF_SLOTS - total_assigned); + + return 0; +} + +/* + * Main entry for bandwidth deallocation. + * + * Strictly speaking, for a somewhat constant set of clients where + * each client gets a constant bandwidth and is just enabled or + * disabled (somewhat dynamically), no action is necessary here to + * avoid starvation for non-zero-allocation clients, as the allocated + * slots will just be unused. However, handing out those unused slots + * to active clients avoids needless latency if the "fixed scheme" + * would give unclaimed slots to an eager low-index client. + */ + +void crisv32_arbiter_deallocate_bandwidth(int client, int region) +{ + int i; + int total_assigned = 0; + + requested_slots[region][client] = 0; + active_clients[region][client] = 0; + + for (i = 0; i < NBR_OF_CLIENTS; i++) + total_assigned += requested_slots[region][i]; + + crisv32_arbiter_config(region, NBR_OF_SLOTS - total_assigned); +} + +int crisv32_arbiter_watch(unsigned long start, unsigned long size, + unsigned long clients, unsigned long accesses, + watch_callback *cb) +{ + int i; + + crisv32_arbiter_init(); + + if (start > 0x80000000) { + printk(KERN_ERR "Arbiter: %lX doesn't look like a " + "physical address", start); + return -EFAULT; + } + + spin_lock(&arbiter_lock); + + for (i = 0; i < NUMBER_OF_BP; i++) { + if (!watches[i].used) { + reg_marb_rw_intr_mask intr_mask = + REG_RD(marb, regi_marb, rw_intr_mask); + + watches[i].used = 1; + watches[i].start = start; + watches[i].end = start + size; + watches[i].cb = cb; + + REG_WR_INT(marb_bp, watches[i].instance, rw_first_addr, + watches[i].start); + REG_WR_INT(marb_bp, watches[i].instance, rw_last_addr, + watches[i].end); + REG_WR_INT(marb_bp, watches[i].instance, rw_op, + accesses); + REG_WR_INT(marb_bp, watches[i].instance, rw_clients, + clients); + + if (i == 0) + intr_mask.bp0 = regk_marb_yes; + else if (i == 1) + intr_mask.bp1 = regk_marb_yes; + else if (i == 2) + intr_mask.bp2 = regk_marb_yes; + else if (i == 3) + intr_mask.bp3 = regk_marb_yes; + + REG_WR(marb, regi_marb, rw_intr_mask, intr_mask); + spin_unlock(&arbiter_lock); + + return i; + } + } + spin_unlock(&arbiter_lock); + return -ENOMEM; +} + +int crisv32_arbiter_unwatch(int id) +{ + reg_marb_rw_intr_mask intr_mask = REG_RD(marb, regi_marb, rw_intr_mask); + + crisv32_arbiter_init(); + + spin_lock(&arbiter_lock); + + if ((id < 0) || (id >= NUMBER_OF_BP) || (!watches[id].used)) { + spin_unlock(&arbiter_lock); + return -EINVAL; + } + + memset(&watches[id], 0, sizeof(struct crisv32_watch_entry)); + + if (id == 0) + intr_mask.bp0 = regk_marb_no; + else if (id == 1) + intr_mask.bp2 = regk_marb_no; + else if (id == 2) + intr_mask.bp2 = regk_marb_no; + else if (id == 3) + intr_mask.bp3 = regk_marb_no; + + REG_WR(marb, regi_marb, rw_intr_mask, intr_mask); + + spin_unlock(&arbiter_lock); + return 0; +} + +extern void show_registers(struct pt_regs *regs); + +static irqreturn_t crisv32_arbiter_irq(int irq, void *dev_id) +{ + reg_marb_r_masked_intr masked_intr = + REG_RD(marb, regi_marb, r_masked_intr); + reg_marb_bp_r_brk_clients r_clients; + reg_marb_bp_r_brk_addr r_addr; + reg_marb_bp_r_brk_op r_op; + reg_marb_bp_r_brk_first_client r_first; + reg_marb_bp_r_brk_size r_size; + reg_marb_bp_rw_ack ack = { 0 }; + reg_marb_rw_ack_intr ack_intr = { + .bp0 = 1, .bp1 = 1, .bp2 = 1, .bp3 = 1 + }; + struct crisv32_watch_entry *watch; + + if (masked_intr.bp0) { + watch = &watches[0]; + ack_intr.bp0 = regk_marb_yes; + } else if (masked_intr.bp1) { + watch = &watches[1]; + ack_intr.bp1 = regk_marb_yes; + } else if (masked_intr.bp2) { + watch = &watches[2]; + ack_intr.bp2 = regk_marb_yes; + } else if (masked_intr.bp3) { + watch = &watches[3]; + ack_intr.bp3 = regk_marb_yes; + } else { + return IRQ_NONE; + } + + /* Retrieve all useful information and print it. */ + r_clients = REG_RD(marb_bp, watch->instance, r_brk_clients); + r_addr = REG_RD(marb_bp, watch->instance, r_brk_addr); + r_op = REG_RD(marb_bp, watch->instance, r_brk_op); + r_first = REG_RD(marb_bp, watch->instance, r_brk_first_client); + r_size = REG_RD(marb_bp, watch->instance, r_brk_size); + + printk(KERN_INFO "Arbiter IRQ\n"); + printk(KERN_INFO "Clients %X addr %X op %X first %X size %X\n", + REG_TYPE_CONV(int, reg_marb_bp_r_brk_clients, r_clients), + REG_TYPE_CONV(int, reg_marb_bp_r_brk_addr, r_addr), + REG_TYPE_CONV(int, reg_marb_bp_r_brk_op, r_op), + REG_TYPE_CONV(int, reg_marb_bp_r_brk_first_client, r_first), + REG_TYPE_CONV(int, reg_marb_bp_r_brk_size, r_size)); + + REG_WR(marb_bp, watch->instance, rw_ack, ack); + REG_WR(marb, regi_marb, rw_ack_intr, ack_intr); + + printk(KERN_INFO "IRQ occured at %lX\n", get_irq_regs()->erp); + + if (watch->cb) + watch->cb(); + + return IRQ_HANDLED; +} diff --git a/arch/cris/arch-v32/mach-fs/cpufreq.c b/arch/cris/arch-v32/mach-fs/cpufreq.c new file mode 100644 index 000000000000..d57631c0d8d1 --- /dev/null +++ b/arch/cris/arch-v32/mach-fs/cpufreq.c @@ -0,0 +1,146 @@ +#include <linux/init.h> +#include <linux/module.h> +#include <linux/cpufreq.h> +#include <hwregs/reg_map.h> +#include <asm/arch/hwregs/reg_rdwr.h> +#include <asm/arch/hwregs/config_defs.h> +#include <asm/arch/hwregs/bif_core_defs.h> + +static int +cris_sdram_freq_notifier(struct notifier_block *nb, unsigned long val, + void *data); + +static struct notifier_block cris_sdram_freq_notifier_block = { + .notifier_call = cris_sdram_freq_notifier +}; + +static struct cpufreq_frequency_table cris_freq_table[] = { + {0x01, 6000}, + {0x02, 200000}, + {0, CPUFREQ_TABLE_END}, +}; + +static unsigned int cris_freq_get_cpu_frequency(unsigned int cpu) +{ + reg_config_rw_clk_ctrl clk_ctrl; + clk_ctrl = REG_RD(config, regi_config, rw_clk_ctrl); + return clk_ctrl.pll ? 200000 : 6000; +} + +static void cris_freq_set_cpu_state(unsigned int state) +{ + int i; + struct cpufreq_freqs freqs; + reg_config_rw_clk_ctrl clk_ctrl; + clk_ctrl = REG_RD(config, regi_config, rw_clk_ctrl); + + for_each_possible_cpu(i) { + freqs.old = cris_freq_get_cpu_frequency(i); + freqs.new = cris_freq_table[state].frequency; + freqs.cpu = i; + } + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + local_irq_disable(); + + /* Even though we may be SMP they will share the same clock + * so all settings are made on CPU0. */ + if (cris_freq_table[state].frequency == 200000) + clk_ctrl.pll = 1; + else + clk_ctrl.pll = 0; + REG_WR(config, regi_config, rw_clk_ctrl, clk_ctrl); + + local_irq_enable(); + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); +}; + +static int cris_freq_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, &cris_freq_table[0]); +} + +static int cris_freq_target(struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) +{ + unsigned int newstate = 0; + + if (cpufreq_frequency_table_target + (policy, cris_freq_table, target_freq, relation, &newstate)) + return -EINVAL; + + cris_freq_set_cpu_state(newstate); + + return 0; +} + +static int cris_freq_cpu_init(struct cpufreq_policy *policy) +{ + int result; + + /* cpuinfo and default policy values */ + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->cpuinfo.transition_latency = 1000000; /* 1ms */ + policy->cur = cris_freq_get_cpu_frequency(0); + + result = cpufreq_frequency_table_cpuinfo(policy, cris_freq_table); + if (result) + return (result); + + cpufreq_frequency_table_get_attr(cris_freq_table, policy->cpu); + + return 0; +} + +static int cris_freq_cpu_exit(struct cpufreq_policy *policy) +{ + cpufreq_frequency_table_put_attr(policy->cpu); + return 0; +} + +static struct freq_attr *cris_freq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver cris_freq_driver = { + .get = cris_freq_get_cpu_frequency, + .verify = cris_freq_verify, + .target = cris_freq_target, + .init = cris_freq_cpu_init, + .exit = cris_freq_cpu_exit, + .name = "cris_freq", + .owner = THIS_MODULE, + .attr = cris_freq_attr, +}; + +static int __init cris_freq_init(void) +{ + int ret; + ret = cpufreq_register_driver(&cris_freq_driver); + cpufreq_register_notifier(&cris_sdram_freq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); + return ret; +} + +static int +cris_sdram_freq_notifier(struct notifier_block *nb, unsigned long val, + void *data) +{ + int i; + struct cpufreq_freqs *freqs = data; + if (val == CPUFREQ_PRECHANGE) { + reg_bif_core_rw_sdram_timing timing = + REG_RD(bif_core, regi_bif_core, rw_sdram_timing); + timing.cpd = (freqs->new == 200000 ? 0 : 1); + + if (freqs->new == 200000) + for (i = 0; i < 50000; i++) ; + REG_WR(bif_core, regi_bif_core, rw_sdram_timing, timing); + } + return 0; +} + +module_init(cris_freq_init); diff --git a/arch/cris/arch-v32/kernel/dma.c b/arch/cris/arch-v32/mach-fs/dma.c index 570e19128ffd..a6acf4e6345c 100644 --- a/arch/cris/arch-v32/kernel/dma.c +++ b/arch/cris/arch-v32/mach-fs/dma.c @@ -3,49 +3,54 @@ #include <linux/kernel.h> #include <linux/spinlock.h> #include <asm/dma.h> -#include <asm/arch/hwregs/reg_map.h> -#include <asm/arch/hwregs/reg_rdwr.h> -#include <asm/arch/hwregs/marb_defs.h> -#include <asm/arch/hwregs/config_defs.h> -#include <asm/arch/hwregs/strmux_defs.h> +#include <hwregs/reg_map.h> +#include <hwregs/reg_rdwr.h> +#include <hwregs/marb_defs.h> +#include <hwregs/config_defs.h> +#include <hwregs/strmux_defs.h> #include <linux/errno.h> #include <asm/system.h> -#include <asm/arch/arbiter.h> +#include <asm/arch/mach/arbiter.h> static char used_dma_channels[MAX_DMA_CHANNELS]; -static const char * used_dma_channels_users[MAX_DMA_CHANNELS]; +static const char *used_dma_channels_users[MAX_DMA_CHANNELS]; static DEFINE_SPINLOCK(dma_lock); -int crisv32_request_dma(unsigned int dmanr, const char * device_id, - unsigned options, unsigned int bandwidth, +int crisv32_request_dma(unsigned int dmanr, const char *device_id, + unsigned options, unsigned int bandwidth, enum dma_owner owner) { unsigned long flags; reg_config_rw_clk_ctrl clk_ctrl; reg_strmux_rw_cfg strmux_cfg; - if (crisv32_arbiter_allocate_bandwidth(dmanr, - options & DMA_INT_MEM ? INT_REGION : EXT_REGION, - bandwidth)) - return -ENOMEM; + if (crisv32_arbiter_allocate_bandwidth(dmanr, + options & DMA_INT_MEM ? + INT_REGION : EXT_REGION, + bandwidth)) + return -ENOMEM; spin_lock_irqsave(&dma_lock, flags); if (used_dma_channels[dmanr]) { spin_unlock_irqrestore(&dma_lock, flags); if (options & DMA_VERBOSE_ON_ERROR) { - printk("Failed to request DMA %i for %s, already allocated by %s\n", dmanr, device_id, used_dma_channels_users[dmanr]); + printk(KERN_ERR "Failed to request DMA %i for %s, " + "already allocated by %s\n", + dmanr, + device_id, + used_dma_channels_users[dmanr]); } if (options & DMA_PANIC_ON_ERROR) panic("request_dma error!"); + spin_unlock_irqrestore(&dma_lock, flags); return -EBUSY; } clk_ctrl = REG_RD(config, regi_config, rw_clk_ctrl); strmux_cfg = REG_RD(strmux, regi_strmux, rw_cfg); - switch(dmanr) - { + switch (dmanr) { case 0: case 1: clk_ctrl.dma01_eth0 = 1; @@ -72,7 +77,9 @@ int crisv32_request_dma(unsigned int dmanr, const char * device_id, default: spin_unlock_irqrestore(&dma_lock, flags); if (options & DMA_VERBOSE_ON_ERROR) { - printk("Failed to request DMA %i for %s, only 0-%i valid)\n", dmanr, device_id, MAX_DMA_CHANNELS-1); + printk(KERN_ERR "Failed to request DMA %i for %s, " + "only 0-%i valid)\n", + dmanr, device_id, MAX_DMA_CHANNELS - 1); } if (options & DMA_PANIC_ON_ERROR) @@ -80,8 +87,7 @@ int crisv32_request_dma(unsigned int dmanr, const char * device_id, return -EINVAL; } - switch(owner) - { + switch (owner) { case dma_eth0: if (dmanr == 0) strmux_cfg.dma0 = regk_strmux_eth0; @@ -212,7 +218,7 @@ int crisv32_request_dma(unsigned int dmanr, const char * device_id, used_dma_channels_users[dmanr] = device_id; REG_WR(config, regi_config, rw_clk_ctrl, clk_ctrl); REG_WR(strmux, regi_strmux, rw_cfg, strmux_cfg); - spin_unlock_irqrestore(&dma_lock,flags); + spin_unlock_irqrestore(&dma_lock, flags); return 0; } diff --git a/arch/cris/arch-v32/lib/dram_init.S b/arch/cris/arch-v32/mach-fs/dram_init.S index 218fbe259ee5..6fbad336527b 100644 --- a/arch/cris/arch-v32/lib/dram_init.S +++ b/arch/cris/arch-v32/mach-fs/dram_init.S @@ -1,23 +1,22 @@ -/* $Id: dram_init.S,v 1.4 2005/04/24 18:48:32 starvik Exp $ - * +/* * DRAM/SDRAM initialization - alter with care * This file is intended to be included from other assembler files * * Note: This file may not modify r8 or r9 because they are used to * carry information from the decompresser to the kernel * - * Copyright (C) 2000-2003 Axis Communications AB + * Copyright (C) 2000-2007 Axis Communications AB * - * Authors: Mikael Starvik (starvik@axis.com) + * Authors: Mikael Starvik <starvik@axis.com> */ /* Just to be certain the config file is included, we include it here - * explicitly instead of depending on it being included in the file that + * explicitely instead of depending on it being included in the file that * uses this code. */ -#include <asm/arch/hwregs/asm/reg_map_asm.h> -#include <asm/arch/hwregs/asm/bif_core_defs_asm.h> +#include <hwregs/asm/reg_map_asm.h> +#include <hwregs/asm/bif_core_defs_asm.h> ;; WARNING! The registers r8 and r9 are used as parameters carrying ;; information from the decompressor (if the kernel was compressed). @@ -46,7 +45,7 @@ move.d 0x40, $r4 ; Assume 32 bits and CAS latency = 2 move.d CONFIG_ETRAX_SDRAM_TIMING, $r1 - and.d 0x07, $r1 ; Get CAS latency + and.d 0x07, $r1 ; Get CAS latency cmpq 2, $r1 ; CL = 2 ? beq _bw_check nop @@ -80,12 +79,10 @@ _set_timing: subq 1, $r2 ; Issue initialization command sequence - move.d _sdram_commands_start, $r2 - and.d 0x000fffff, $r2 ; Make sure commands are read from flash - move.d _sdram_commands_end, $r3 - and.d 0x000fffff, $r3 + lapc _sdram_commands_start, $r2 + lapc _sdram_commands_end, $r3 1: clear.d $r6 - move.b [$r2+], $r6 ; Load command + move.b [$r2+], $r6 ; Load command or.d $r4, $r6 ; Add calculated mrs move.d $r6, [$r5] ; Write rw_sdram_cmd ; Wait 80 ns between each command diff --git a/arch/cris/arch-v32/lib/hw_settings.S b/arch/cris/arch-v32/mach-fs/hw_settings.S index fff9443513d1..8bde93c36214 100644 --- a/arch/cris/arch-v32/lib/hw_settings.S +++ b/arch/cris/arch-v32/mach-fs/hw_settings.S @@ -1,18 +1,16 @@ /* - * $Id: hw_settings.S,v 1.3 2005/04/24 18:36:57 starvik Exp $ - * * This table is used by some tools to extract hardware parameters. * The table should be included in the kernel and the decompressor. * Don't forget to update the tools if you change this table. * - * Copyright (C) 2001 Axis Communications AB + * Copyright (C) 2001-2007 Axis Communications AB * - * Authors: Mikael Starvik (starvik@axis.com) + * Authors: Mikael Starvik <starvik@axis.com> */ -#include <asm/arch/hwregs/asm/reg_map_asm.h> -#include <asm/arch/hwregs/asm/bif_core_defs_asm.h> -#include <asm/arch/hwregs/asm/gio_defs_asm.h> +#include <hwregs/asm/reg_map_asm.h> +#include <hwregs/asm/bif_core_defs_asm.h> +#include <hwregs/asm/gio_defs_asm.h> .ascii "HW_PARAM_MAGIC" ; Magic number .dword 0xc0004000 ; Kernel start address diff --git a/arch/cris/arch-v32/mach-fs/io.c b/arch/cris/arch-v32/mach-fs/io.c new file mode 100644 index 000000000000..a03a3ad3a188 --- /dev/null +++ b/arch/cris/arch-v32/mach-fs/io.c @@ -0,0 +1,191 @@ +/* + * Helper functions for I/O pins. + * + * Copyright (c) 2004-2007 Axis Communications AB. + */ + +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/string.h> +#include <linux/ctype.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <asm/io.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/hwregs/gio_defs.h> + +#ifndef DEBUG +#define DEBUG(x) +#endif + +struct crisv32_ioport crisv32_ioports[] = { + { + (unsigned long *)REG_ADDR(gio, regi_gio, rw_pa_oe), + (unsigned long *)REG_ADDR(gio, regi_gio, rw_pa_dout), + (unsigned long *)REG_ADDR(gio, regi_gio, r_pa_din), + 8 + }, + { + (unsigned long *)REG_ADDR(gio, regi_gio, rw_pb_oe), + (unsigned long *)REG_ADDR(gio, regi_gio, rw_pb_dout), + (unsigned long *)REG_ADDR(gio, regi_gio, r_pb_din), + 18 + }, + { + (unsigned long *)REG_ADDR(gio, regi_gio, rw_pc_oe), + (unsigned long *)REG_ADDR(gio, regi_gio, rw_pc_dout), + (unsigned long *)REG_ADDR(gio, regi_gio, r_pc_din), + 18 + }, + { + (unsigned long *)REG_ADDR(gio, regi_gio, rw_pd_oe), + (unsigned long *)REG_ADDR(gio, regi_gio, rw_pd_dout), + (unsigned long *)REG_ADDR(gio, regi_gio, r_pd_din), + 18 + }, + { + (unsigned long *)REG_ADDR(gio, regi_gio, rw_pe_oe), + (unsigned long *)REG_ADDR(gio, regi_gio, rw_pe_dout), + (unsigned long *)REG_ADDR(gio, regi_gio, r_pe_din), + 18 + } +}; + +#define NBR_OF_PORTS sizeof(crisv32_ioports)/sizeof(struct crisv32_ioport) + +struct crisv32_iopin crisv32_led_net0_green; +struct crisv32_iopin crisv32_led_net0_red; +struct crisv32_iopin crisv32_led_net1_green; +struct crisv32_iopin crisv32_led_net1_red; +struct crisv32_iopin crisv32_led2_green; +struct crisv32_iopin crisv32_led2_red; +struct crisv32_iopin crisv32_led3_green; +struct crisv32_iopin crisv32_led3_red; + +/* Dummy port used when green LED and red LED is on the same bit */ +static unsigned long io_dummy; +static struct crisv32_ioport dummy_port = { + &io_dummy, + &io_dummy, + &io_dummy, + 18 +}; +static struct crisv32_iopin dummy_led = { + &dummy_port, + 0 +}; + +static int __init crisv32_io_init(void) +{ + int ret = 0; + + u32 i; + + /* Locks *should* be dynamically initialized. */ + for (i = 0; i < ARRAY_SIZE(crisv32_ioports); i++) + spin_lock_init(&crisv32_ioports[i].lock); + spin_lock_init(&dummy_port.lock); + + /* Initialize LEDs */ +#if (defined(CONFIG_ETRAX_NBR_LED_GRP_ONE) || defined(CONFIG_ETRAX_NBR_LED_GRP_TWO)) + ret += + crisv32_io_get_name(&crisv32_led_net0_green, + CONFIG_ETRAX_LED_G_NET0); + crisv32_io_set_dir(&crisv32_led_net0_green, crisv32_io_dir_out); + if (strcmp(CONFIG_ETRAX_LED_G_NET0, CONFIG_ETRAX_LED_R_NET0)) { + ret += + crisv32_io_get_name(&crisv32_led_net0_red, + CONFIG_ETRAX_LED_R_NET0); + crisv32_io_set_dir(&crisv32_led_net0_red, crisv32_io_dir_out); + } else + crisv32_led_net0_red = dummy_led; +#endif + +#ifdef CONFIG_ETRAX_NBR_LED_GRP_TWO + ret += + crisv32_io_get_name(&crisv32_led_net1_green, + CONFIG_ETRAX_LED_G_NET1); + crisv32_io_set_dir(&crisv32_led_net1_green, crisv32_io_dir_out); + if (strcmp(CONFIG_ETRAX_LED_G_NET1, CONFIG_ETRAX_LED_R_NET1)) { + crisv32_io_get_name(&crisv32_led_net1_red, + CONFIG_ETRAX_LED_R_NET1); + crisv32_io_set_dir(&crisv32_led_net1_red, crisv32_io_dir_out); + } else + crisv32_led_net1_red = dummy_led; +#endif + + ret += crisv32_io_get_name(&crisv32_led2_green, CONFIG_ETRAX_V32_LED2G); + ret += crisv32_io_get_name(&crisv32_led2_red, CONFIG_ETRAX_V32_LED2R); + ret += crisv32_io_get_name(&crisv32_led3_green, CONFIG_ETRAX_V32_LED3G); + ret += crisv32_io_get_name(&crisv32_led3_red, CONFIG_ETRAX_V32_LED3R); + + crisv32_io_set_dir(&crisv32_led2_green, crisv32_io_dir_out); + crisv32_io_set_dir(&crisv32_led2_red, crisv32_io_dir_out); + crisv32_io_set_dir(&crisv32_led3_green, crisv32_io_dir_out); + crisv32_io_set_dir(&crisv32_led3_red, crisv32_io_dir_out); + + return ret; +} + +__initcall(crisv32_io_init); + +int crisv32_io_get(struct crisv32_iopin *iopin, + unsigned int port, unsigned int pin) +{ + if (port > NBR_OF_PORTS) + return -EINVAL; + if (port > crisv32_ioports[port].pin_count) + return -EINVAL; + + iopin->bit = 1 << pin; + iopin->port = &crisv32_ioports[port]; + + /* Only allocate pinmux gpiopins if port != PORT_A (port 0) */ + /* NOTE! crisv32_pinmux_alloc thinks PORT_B is port 0 */ + if (port != 0 && crisv32_pinmux_alloc(port - 1, pin, pin, pinmux_gpio)) + return -EIO; + DEBUG(printk(KERN_DEBUG "crisv32_io_get: Allocated pin %d on port %d\n", + pin, port)); + + return 0; +} + +int crisv32_io_get_name(struct crisv32_iopin *iopin, const char *name) +{ + int port; + int pin; + + if (toupper(*name) == 'P') + name++; + + if (toupper(*name) < 'A' || toupper(*name) > 'E') + return -EINVAL; + + port = toupper(*name) - 'A'; + name++; + pin = simple_strtoul(name, NULL, 10); + + if (pin < 0 || pin > crisv32_ioports[port].pin_count) + return -EINVAL; + + iopin->bit = 1 << pin; + iopin->port = &crisv32_ioports[port]; + + /* Only allocate pinmux gpiopins if port != PORT_A (port 0) */ + /* NOTE! crisv32_pinmux_alloc thinks PORT_B is port 0 */ + if (port != 0 && crisv32_pinmux_alloc(port - 1, pin, pin, pinmux_gpio)) + return -EIO; + + DEBUG(printk(KERN_DEBUG + "crisv32_io_get_name: Allocated pin %d on port %d\n", + pin, port)); + + return 0; +} + +#ifdef CONFIG_PCI +/* PCI I/O access stuff */ +struct cris_io_operations *cris_iops = NULL; +EXPORT_SYMBOL(cris_iops); +#endif diff --git a/arch/cris/arch-v32/mach-fs/pinmux.c b/arch/cris/arch-v32/mach-fs/pinmux.c new file mode 100644 index 000000000000..d722ad9ae626 --- /dev/null +++ b/arch/cris/arch-v32/mach-fs/pinmux.c @@ -0,0 +1,309 @@ +/* + * Allocator for I/O pins. All pins are allocated to GPIO at bootup. + * Unassigned pins and GPIO pins can be allocated to a fixed interface + * or the I/O processor instead. + * + * Copyright (c) 2004-2007 Axis Communications AB. + */ + +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/spinlock.h> +#include <hwregs/reg_map.h> +#include <hwregs/reg_rdwr.h> +#include <pinmux.h> +#include <hwregs/pinmux_defs.h> + +#undef DEBUG + +#define PORT_PINS 18 +#define PORTS 4 + +static char pins[PORTS][PORT_PINS]; +static DEFINE_SPINLOCK(pinmux_lock); + +static void crisv32_pinmux_set(int port); + +int crisv32_pinmux_init(void) +{ + static int initialized; + + if (!initialized) { + reg_pinmux_rw_pa pa = REG_RD(pinmux, regi_pinmux, rw_pa); + initialized = 1; + REG_WR_INT(pinmux, regi_pinmux, rw_hwprot, 0); + pa.pa0 = pa.pa1 = pa.pa2 = pa.pa3 = + pa.pa4 = pa.pa5 = pa.pa6 = pa.pa7 = regk_pinmux_yes; + REG_WR(pinmux, regi_pinmux, rw_pa, pa); + crisv32_pinmux_alloc(PORT_B, 0, PORT_PINS - 1, pinmux_gpio); + crisv32_pinmux_alloc(PORT_C, 0, PORT_PINS - 1, pinmux_gpio); + crisv32_pinmux_alloc(PORT_D, 0, PORT_PINS - 1, pinmux_gpio); + crisv32_pinmux_alloc(PORT_E, 0, PORT_PINS - 1, pinmux_gpio); + } + + return 0; +} + +int +crisv32_pinmux_alloc(int port, int first_pin, int last_pin, enum pin_mode mode) +{ + int i; + unsigned long flags; + + crisv32_pinmux_init(); + + if (port > PORTS) + return -EINVAL; + + spin_lock_irqsave(&pinmux_lock, flags); + + for (i = first_pin; i <= last_pin; i++) { + if ((pins[port][i] != pinmux_none) + && (pins[port][i] != pinmux_gpio) + && (pins[port][i] != mode)) { + spin_unlock_irqrestore(&pinmux_lock, flags); +#ifdef DEBUG + panic("Pinmux alloc failed!\n"); +#endif + return -EPERM; + } + } + + for (i = first_pin; i <= last_pin; i++) + pins[port][i] = mode; + + crisv32_pinmux_set(port); + + spin_unlock_irqrestore(&pinmux_lock, flags); + + return 0; +} + +int crisv32_pinmux_alloc_fixed(enum fixed_function function) +{ + int ret = -EINVAL; + char saved[sizeof pins]; + unsigned long flags; + + spin_lock_irqsave(&pinmux_lock, flags); + + /* Save internal data for recovery */ + memcpy(saved, pins, sizeof pins); + + crisv32_pinmux_init(); /* Must be done before we read rw_hwprot */ + + reg_pinmux_rw_hwprot hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot); + + switch (function) { + case pinmux_ser1: + ret = crisv32_pinmux_alloc(PORT_C, 4, 7, pinmux_fixed); + hwprot.ser1 = regk_pinmux_yes; + break; + case pinmux_ser2: + ret = crisv32_pinmux_alloc(PORT_C, 8, 11, pinmux_fixed); + hwprot.ser2 = regk_pinmux_yes; + break; + case pinmux_ser3: + ret = crisv32_pinmux_alloc(PORT_C, 12, 15, pinmux_fixed); + hwprot.ser3 = regk_pinmux_yes; + break; + case pinmux_sser0: + ret = crisv32_pinmux_alloc(PORT_C, 0, 3, pinmux_fixed); + ret |= crisv32_pinmux_alloc(PORT_C, 16, 16, pinmux_fixed); + hwprot.sser0 = regk_pinmux_yes; + break; + case pinmux_sser1: + ret = crisv32_pinmux_alloc(PORT_D, 0, 4, pinmux_fixed); + hwprot.sser1 = regk_pinmux_yes; + break; + case pinmux_ata0: + ret = crisv32_pinmux_alloc(PORT_D, 5, 7, pinmux_fixed); + ret |= crisv32_pinmux_alloc(PORT_D, 15, 17, pinmux_fixed); + hwprot.ata0 = regk_pinmux_yes; + break; + case pinmux_ata1: + ret = crisv32_pinmux_alloc(PORT_D, 0, 4, pinmux_fixed); + ret |= crisv32_pinmux_alloc(PORT_E, 17, 17, pinmux_fixed); + hwprot.ata1 = regk_pinmux_yes; + break; + case pinmux_ata2: + ret = crisv32_pinmux_alloc(PORT_C, 11, 15, pinmux_fixed); + ret |= crisv32_pinmux_alloc(PORT_E, 3, 3, pinmux_fixed); + hwprot.ata2 = regk_pinmux_yes; + break; + case pinmux_ata3: + ret = crisv32_pinmux_alloc(PORT_C, 8, 10, pinmux_fixed); + ret |= crisv32_pinmux_alloc(PORT_C, 0, 2, pinmux_fixed); + hwprot.ata2 = regk_pinmux_yes; + break; + case pinmux_ata: + ret = crisv32_pinmux_alloc(PORT_B, 0, 15, pinmux_fixed); + ret |= crisv32_pinmux_alloc(PORT_D, 8, 15, pinmux_fixed); + hwprot.ata = regk_pinmux_yes; + break; + case pinmux_eth1: + ret = crisv32_pinmux_alloc(PORT_E, 0, 17, pinmux_fixed); + hwprot.eth1 = regk_pinmux_yes; + hwprot.eth1_mgm = regk_pinmux_yes; + break; + case pinmux_timer: + ret = crisv32_pinmux_alloc(PORT_C, 16, 16, pinmux_fixed); + hwprot.timer = regk_pinmux_yes; + spin_unlock_irqrestore(&pinmux_lock, flags); + return ret; + } + + if (!ret) + REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot); + else + memcpy(pins, saved, sizeof pins); + + spin_unlock_irqrestore(&pinmux_lock, flags); + + return ret; +} + +void crisv32_pinmux_set(int port) +{ + int i; + int gpio_val = 0; + int iop_val = 0; + + for (i = 0; i < PORT_PINS; i++) { + if (pins[port][i] == pinmux_gpio) + gpio_val |= (1 << i); + else if (pins[port][i] == pinmux_iop) + iop_val |= (1 << i); + } + + REG_WRITE(int, regi_pinmux + REG_RD_ADDR_pinmux_rw_pb_gio + 8 * port, + gpio_val); + REG_WRITE(int, regi_pinmux + REG_RD_ADDR_pinmux_rw_pb_iop + 8 * port, + iop_val); + +#ifdef DEBUG + crisv32_pinmux_dump(); +#endif +} + +int crisv32_pinmux_dealloc(int port, int first_pin, int last_pin) +{ + int i; + unsigned long flags; + + crisv32_pinmux_init(); + + if (port > PORTS) + return -EINVAL; + + spin_lock_irqsave(&pinmux_lock, flags); + + for (i = first_pin; i <= last_pin; i++) + pins[port][i] = pinmux_none; + + crisv32_pinmux_set(port); + spin_unlock_irqrestore(&pinmux_lock, flags); + + return 0; +} + +int crisv32_pinmux_dealloc_fixed(enum fixed_function function) +{ + int ret = -EINVAL; + char saved[sizeof pins]; + unsigned long flags; + + spin_lock_irqsave(&pinmux_lock, flags); + + /* Save internal data for recovery */ + memcpy(saved, pins, sizeof pins); + + crisv32_pinmux_init(); /* Must be done before we read rw_hwprot */ + + reg_pinmux_rw_hwprot hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot); + + switch (function) { + case pinmux_ser1: + ret = crisv32_pinmux_dealloc(PORT_C, 4, 7); + hwprot.ser1 = regk_pinmux_no; + break; + case pinmux_ser2: + ret = crisv32_pinmux_dealloc(PORT_C, 8, 11); + hwprot.ser2 = regk_pinmux_no; + break; + case pinmux_ser3: + ret = crisv32_pinmux_dealloc(PORT_C, 12, 15); + hwprot.ser3 = regk_pinmux_no; + break; + case pinmux_sser0: + ret = crisv32_pinmux_dealloc(PORT_C, 0, 3); + ret |= crisv32_pinmux_dealloc(PORT_C, 16, 16); + hwprot.sser0 = regk_pinmux_no; + break; + case pinmux_sser1: + ret = crisv32_pinmux_dealloc(PORT_D, 0, 4); + hwprot.sser1 = regk_pinmux_no; + break; + case pinmux_ata0: + ret = crisv32_pinmux_dealloc(PORT_D, 5, 7); + ret |= crisv32_pinmux_dealloc(PORT_D, 15, 17); + hwprot.ata0 = regk_pinmux_no; + break; + case pinmux_ata1: + ret = crisv32_pinmux_dealloc(PORT_D, 0, 4); + ret |= crisv32_pinmux_dealloc(PORT_E, 17, 17); + hwprot.ata1 = regk_pinmux_no; + break; + case pinmux_ata2: + ret = crisv32_pinmux_dealloc(PORT_C, 11, 15); + ret |= crisv32_pinmux_dealloc(PORT_E, 3, 3); + hwprot.ata2 = regk_pinmux_no; + break; + case pinmux_ata3: + ret = crisv32_pinmux_dealloc(PORT_C, 8, 10); + ret |= crisv32_pinmux_dealloc(PORT_C, 0, 2); + hwprot.ata2 = regk_pinmux_no; + break; + case pinmux_ata: + ret = crisv32_pinmux_dealloc(PORT_B, 0, 15); + ret |= crisv32_pinmux_dealloc(PORT_D, 8, 15); + hwprot.ata = regk_pinmux_no; + break; + case pinmux_eth1: + ret = crisv32_pinmux_dealloc(PORT_E, 0, 17); + hwprot.eth1 = regk_pinmux_no; + hwprot.eth1_mgm = regk_pinmux_no; + break; + case pinmux_timer: + ret = crisv32_pinmux_dealloc(PORT_C, 16, 16); + hwprot.timer = regk_pinmux_no; + spin_unlock_irqrestore(&pinmux_lock, flags); + return ret; + } + + if (!ret) + REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot); + else + memcpy(pins, saved, sizeof pins); + + spin_unlock_irqrestore(&pinmux_lock, flags); + + return ret; +} + +void crisv32_pinmux_dump(void) +{ + int i, j; + + crisv32_pinmux_init(); + + for (i = 0; i < PORTS; i++) { + printk(KERN_DEBUG "Port %c\n", 'B' + i); + for (j = 0; j < PORT_PINS; j++) + printk(KERN_DEBUG " Pin %d = %d\n", j, pins[i][j]); + } +} + +__initcall(crisv32_pinmux_init); diff --git a/arch/cris/arch-v32/mach-fs/vcs_hook.c b/arch/cris/arch-v32/mach-fs/vcs_hook.c new file mode 100644 index 000000000000..593b10f07ef1 --- /dev/null +++ b/arch/cris/arch-v32/mach-fs/vcs_hook.c @@ -0,0 +1,100 @@ +/* + * Call simulator hook. This is the part running in the + * simulated program. + */ + +#include "vcs_hook.h" +#include <stdarg.h> +#include <asm/arch-v32/hwregs/reg_map.h> +#include <asm/arch-v32/hwregs/intr_vect_defs.h> + +#define HOOK_TRIG_ADDR 0xb7000000 /* hook cvlog model reg address */ +#define HOOK_MEM_BASE_ADDR 0xa0000000 /* csp4 (shared mem) base addr */ + +#define HOOK_DATA(offset) ((unsigned *)HOOK_MEM_BASE_ADDR)[offset] +#define VHOOK_DATA(offset) ((volatile unsigned *)HOOK_MEM_BASE_ADDR)[offset] +#define HOOK_TRIG(funcid) \ + do { \ + *((unsigned *) HOOK_TRIG_ADDR) = funcid; \ + } while (0) +#define HOOK_DATA_BYTE(offset) ((unsigned char *)HOOK_MEM_BASE_ADDR)[offset] + +int hook_call(unsigned id, unsigned pcnt, ...) +{ + va_list ap; + unsigned i; + unsigned ret; +#ifdef USING_SOS + PREEMPT_OFF_SAVE(); +#endif + + /* pass parameters */ + HOOK_DATA(0) = id; + + /* Have to make hook_print_str a special case since we call with a + * parameter of byte type. Should perhaps be a separate + * hook_call. */ + + if (id == hook_print_str) { + int i; + char *str; + + HOOK_DATA(1) = pcnt; + + va_start(ap, pcnt); + str = (char *)va_arg(ap, unsigned); + + for (i = 0; i != pcnt; i++) + HOOK_DATA_BYTE(8 + i) = str[i]; + + HOOK_DATA_BYTE(8 + i) = 0; /* null byte */ + } else { + va_start(ap, pcnt); + for (i = 1; i <= pcnt; i++) + HOOK_DATA(i) = va_arg(ap, unsigned); + va_end(ap); + } + + /* read from mem to make sure data has propagated to memory before + * trigging */ + ret = *((volatile unsigned *)HOOK_MEM_BASE_ADDR); + + /* trigger hook */ + HOOK_TRIG(id); + + /* wait for call to finish */ + while (VHOOK_DATA(0) > 0) ; + + /* extract return value */ + + ret = VHOOK_DATA(1); + +#ifdef USING_SOS + PREEMPT_RESTORE(); +#endif + return ret; +} + +unsigned hook_buf(unsigned i) +{ + return (HOOK_DATA(i)); +} + +void print_str(const char *str) +{ + int i; + /* find null at end of string */ + for (i = 1; str[i]; i++) ; + hook_call(hook_print_str, i, str); +} + +void CPU_KICK_DOG(void) +{ + (void)hook_call(hook_kick_dog, 0); +} + +void CPU_WATCHDOG_TIMEOUT(unsigned t) +{ + (void)hook_call(hook_dog_timeout, 1, t); +} + diff --git a/arch/cris/arch-v32/kernel/vcs_hook.h b/arch/cris/arch-v32/mach-fs/vcs_hook.h index 7d73709e3cc6..c000b9fece41 100644 --- a/arch/cris/arch-v32/kernel/vcs_hook.h +++ b/arch/cris/arch-v32/mach-fs/vcs_hook.h @@ -1,11 +1,11 @@ -// $Id: vcs_hook.h,v 1.1 2003/08/12 12:01:06 starvik Exp $ -// -// Call simulator hook functions +/* + * Call simulator hook functions + */ #ifndef HOOK_H #define HOOK_H -int hook_call( unsigned id, unsigned pcnt, ...); +int hook_call(unsigned id, unsigned pcnt, ...); enum hook_ids { hook_debug_on = 1, diff --git a/arch/cris/arch-v32/mm/Makefile b/arch/cris/arch-v32/mm/Makefile index 9146f88484b1..0b801f2964ac 100644 --- a/arch/cris/arch-v32/mm/Makefile +++ b/arch/cris/arch-v32/mm/Makefile @@ -1,3 +1,4 @@ # Makefile for the Linux/cris parts of the memory manager. -obj-y := mmu.o init.o tlb.o intmem.o +obj-y += mmu.o init.o tlb.o intmem.o +obj-$(CONFIG_ETRAX_L2CACHE) += l2cache.o diff --git a/arch/cris/arch-v32/mm/init.c b/arch/cris/arch-v32/mm/init.c index a84ba7ff22d2..5a9ac5834647 100644 --- a/arch/cris/arch-v32/mm/init.c +++ b/arch/cris/arch-v32/mm/init.c @@ -65,7 +65,7 @@ cris_mmu_init(void) REG_STATE(mmu, rw_mm_cfg, seg_d, page) | REG_STATE(mmu, rw_mm_cfg, seg_c, linear) | REG_STATE(mmu, rw_mm_cfg, seg_b, linear) | -#ifndef CONFIG_ETRAXFS_SIM +#ifndef CONFIG_ETRAX_VCS_SIM REG_STATE(mmu, rw_mm_cfg, seg_a, page) | #else REG_STATE(mmu, rw_mm_cfg, seg_a, linear) | @@ -84,13 +84,9 @@ cris_mmu_init(void) mmu_kbase_hi = ( REG_FIELD(mmu, rw_mm_kbase_hi, base_f, 0x0) | REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 0x8) | REG_FIELD(mmu, rw_mm_kbase_hi, base_d, 0x0) | -#ifndef CONFIG_ETRAXFS_SIM REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 0x4) | -#else - REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 0x0) | -#endif REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb) | -#ifndef CONFIG_ETRAXFS_SIM +#ifndef CONFIG_ETRAX_VCS_SIM REG_FIELD(mmu, rw_mm_kbase_hi, base_a, 0x0) | #else REG_FIELD(mmu, rw_mm_kbase_hi, base_a, 0xa) | diff --git a/arch/cris/arch-v32/mm/intmem.c b/arch/cris/arch-v32/mm/intmem.c index 41ee7f7997fd..9e8b69cdf19e 100644 --- a/arch/cris/arch-v32/mm/intmem.c +++ b/arch/cris/arch-v32/mm/intmem.c @@ -7,11 +7,17 @@ #include <linux/list.h> #include <linux/slab.h> #include <asm/io.h> -#include <asm/arch/memmap.h> +#include <memmap.h> #define STATUS_FREE 0 #define STATUS_ALLOCATED 1 +#ifdef CONFIG_ETRAX_L2CACHE +#define RESERVED_SIZE 66*1024 +#else +#define RESERVED_SIZE 0 +#endif + struct intmem_allocation { struct list_head entry; unsigned int size; @@ -30,9 +36,10 @@ static void crisv32_intmem_init(void) struct intmem_allocation* alloc = (struct intmem_allocation*)kmalloc(sizeof *alloc, GFP_KERNEL); INIT_LIST_HEAD(&intmem_allocations); - intmem_virtual = ioremap(MEM_INTMEM_START, MEM_INTMEM_SIZE); + intmem_virtual = ioremap(MEM_INTMEM_START + RESERVED_SIZE, + MEM_INTMEM_SIZE - RESERVED_SIZE); initiated = 1; - alloc->size = MEM_INTMEM_SIZE; + alloc->size = MEM_INTMEM_SIZE - RESERVED_SIZE; alloc->offset = 0; alloc->status = STATUS_FREE; list_add_tail(&alloc->entry, &intmem_allocations); @@ -59,19 +66,23 @@ void* crisv32_intmem_alloc(unsigned size, unsigned align) (struct intmem_allocation*) kmalloc(sizeof *alloc, GFP_ATOMIC); alloc->status = STATUS_FREE; - alloc->size = allocation->size - size - alignment; - alloc->offset = allocation->offset + size; + alloc->size = allocation->size - size - + alignment; + alloc->offset = allocation->offset + size + + alignment; list_add(&alloc->entry, &allocation->entry); if (alignment) { - struct intmem_allocation* tmp; - tmp = (struct intmem_allocation*) - kmalloc(sizeof *tmp, GFP_ATOMIC); + struct intmem_allocation *tmp; + tmp = (struct intmem_allocation *) + kmalloc(sizeof *tmp, + GFP_ATOMIC); tmp->offset = allocation->offset; tmp->size = alignment; tmp->status = STATUS_FREE; allocation->offset += alignment; - list_add_tail(&tmp->entry, &allocation->entry); + list_add_tail(&tmp->entry, + &allocation->entry); } } allocation->status = STATUS_ALLOCATED; @@ -96,22 +107,24 @@ void crisv32_intmem_free(void* addr) list_for_each_entry_safe(allocation, tmp, &intmem_allocations, entry) { if (allocation->offset == (int)(addr - intmem_virtual)) { - struct intmem_allocation* prev = + struct intmem_allocation *prev = list_entry(allocation->entry.prev, struct intmem_allocation, entry); - struct intmem_allocation* next = + struct intmem_allocation *next = list_entry(allocation->entry.next, struct intmem_allocation, entry); allocation->status = STATUS_FREE; /* Join with prev and/or next if also free */ - if (prev->status == STATUS_FREE) { + if ((prev != &intmem_allocations) && + (prev->status == STATUS_FREE)) { prev->size += allocation->size; list_del(&allocation->entry); kfree(allocation); allocation = prev; } - if (next->status == STATUS_FREE) { + if ((next != &intmem_allocations) && + (next->status == STATUS_FREE)) { allocation->size += next->size; list_del(&next->entry); kfree(next); @@ -125,15 +138,16 @@ void crisv32_intmem_free(void* addr) void* crisv32_intmem_phys_to_virt(unsigned long addr) { - return (void*)(addr - MEM_INTMEM_START+ - (unsigned long)intmem_virtual); + return (void *)(addr - (MEM_INTMEM_START + RESERVED_SIZE) + + (unsigned long)intmem_virtual); } unsigned long crisv32_intmem_virt_to_phys(void* addr) { return (unsigned long)((unsigned long )addr - - (unsigned long)intmem_virtual + MEM_INTMEM_START); + (unsigned long)intmem_virtual + MEM_INTMEM_START + + RESERVED_SIZE); } - +module_init(crisv32_intmem_init); diff --git a/arch/cris/arch-v32/mm/l2cache.c b/arch/cris/arch-v32/mm/l2cache.c new file mode 100644 index 000000000000..332ff10dcc6b --- /dev/null +++ b/arch/cris/arch-v32/mm/l2cache.c @@ -0,0 +1,29 @@ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <memmap.h> +#include <hwregs/reg_map.h> +#include <hwregs/reg_rdwr.h> +#include <hwregs/l2cache_defs.h> +#include <asm/io.h> + +#define L2CACHE_SIZE 64 + +int __init l2cache_init(void) +{ + reg_l2cache_rw_ctrl ctrl = {0}; + reg_l2cache_rw_cfg cfg = {.en = regk_l2cache_yes}; + + ctrl.csize = L2CACHE_SIZE; + ctrl.cbase = L2CACHE_SIZE / 4 + (L2CACHE_SIZE % 4 ? 1 : 0); + REG_WR(l2cache, regi_l2cache, rw_ctrl, ctrl); + + /* Flush the tag memory */ + memset((void *)(MEM_INTMEM_START | MEM_NON_CACHEABLE), 0, 2*1024); + + /* Enable the cache */ + REG_WR(l2cache, regi_l2cache, rw_cfg, cfg); + + return 0; +} + diff --git a/arch/cris/arch-v32/mm/mmu.S b/arch/cris/arch-v32/mm/mmu.S index 27b70e5006af..2238d154bde3 100644 --- a/arch/cris/arch-v32/mm/mmu.S +++ b/arch/cris/arch-v32/mm/mmu.S @@ -1,3 +1,5 @@ +; WARNING : The refill handler has been modified, see below !!! + /* * Copyright (C) 2003 Axis Communications AB * @@ -61,6 +63,14 @@ ; Note that the code is optimized to minimize stalls (makes the code harder ; to read). ; +; WARNING !!! +; Modified by Mikael Asker 060725: added a workaround for strange TLB +; behavior. If the same PTE is present in more than one set, the TLB +; doesn't recognize it and we get stuck in a loop of refill exceptions. +; The workaround detects such loops and exits them by flushing +; the TLB contents. The problem and workaround were verified +; in VCS by Mikael Starvik. +; ; Each page is 8 KB. Each PMD holds 8192/4 PTEs (each PTE is 4 bytes) so each ; PMD holds 16 MB of virtual memory. ; Bits 0-12 : Offset within a page @@ -68,6 +78,11 @@ ; Bits 24-31 : PMD offset within the PGD .macro MMU_REFILL_HANDLER handler, mmu + .data +1: .dword 0 ; refill_count + ; == 0 <=> last_refill_cause is invalid +2: .dword 0 ; last_refill_cause + .text .globl \handler \handler: subq 4, $sp @@ -76,42 +91,96 @@ subq 4, $sp move \mmu, $srs ; Select MMU support register bank move.d $acr, [$sp] - subq 4, $sp - move.d $r0, [$sp] + subq 12, $sp + move.d 1b, $acr ; Point to refill_count + movem $r2, [$sp] + + test.d [$acr] ; refill_count == 0 ? + beq 5f ; yes, last_refill_cause is invalid + move.d $acr, $r1 + + ; last_refill_cause is valid, investigate cause + addq 4, $r1 ; Point to last_refill_cause + move $s3, $r0 ; Get rw_mm_cause + move.d [$r1], $r2 ; Get last_refill_cause + cmp.d $r0, $r2 ; rw_mm_cause == last_refill_cause ? + beq 6f ; yes, increment count + moveq 1, $r2 + + ; rw_mm_cause != last_refill_cause + move.d $r2, [$acr] ; refill_count = 1 + move.d $r0, [$r1] ; last_refill_cause = rw_mm_cause + +3: ; Probably not in a loop, continue normal processing #ifdef CONFIG_SMP move $s7, $acr ; PGD #else move.d per_cpu__current_pgd, $acr ; PGD #endif ; Look up PMD in PGD - move $s3, $r0 ; rw_mm_cause lsrq 24, $r0 ; Get PMD index into PGD (bit 24-31) move.d [$acr], $acr ; PGD for the current process addi $r0.d, $acr, $acr move $s3, $r0 ; rw_mm_cause move.d [$acr], $acr ; Get PMD - beq 1f + beq 8f ; Look up PTE in PMD lsrq PAGE_SHIFT, $r0 and.w PAGE_MASK, $acr ; Remove PMD flags and.d 0x7ff, $r0 ; Get PTE index into PMD (bit 13-23) addi $r0.d, $acr, $acr move.d [$acr], $acr ; Get PTE - beq 2f - move.d [$sp+], $r0 ; Pop r0 in delayslot + beq 9f + movem [$sp], $r2 ; Restore r0-r2 in delay slot + addq 12, $sp ; Store in TLB move $acr, $s5 - ; Return +4: ; Return move.d [$sp+], $acr - move [$sp], $srs + move [$sp], $srs addq 4, $sp rete rfe -1: ; PMD missing, let the mm subsystem fix it up. - move.d [$sp+], $r0 ; Pop r0 -2: ; PTE missing, let the mm subsystem fix it up. + +5: ; last_refill_cause is invalid + moveq 1, $r2 + addq 4, $r1 ; Point to last_refill_cause + move.d $r2, [$acr] ; refill_count = 1 + move $s3, $r0 ; Get rw_mm_cause + ba 3b ; Continue normal processing + move.d $r0,[$r1] ; last_refill_cause = rw_mm_cause + +6: ; rw_mm_cause == last_refill_cause + move.d [$acr], $r2 ; Get refill_count + cmpq 4, $r2 ; refill_count > 4 ? + bhi 7f ; yes + addq 1, $r2 ; refill_count++ + ba 3b ; Continue normal processing + move.d $r2, [$acr] + +7: ; refill_count > 4, error + move.d $acr, $r0 ; Save pointer to refill_count + clear.d [$r0] ; refill_count = 0 + + ;; rewind the short stack + movem [$sp], $r2 ; Restore r0-r2 + addq 12, $sp + move.d [$sp+], $acr + move [$sp], $srs + addq 4, $sp + ;; Keep it simple (slow), save all the regs. + SAVE_ALL + jsr __flush_tlb_all + nop + ba ret_from_intr ; Return + nop + +8: ; PMD missing, let the mm subsystem fix it up. + movem [$sp], $r2 ; Restore r0-r2 +9: ; PTE missing, let the mm subsystem fix it up. + addq 12, $sp move.d [$sp+], $acr - move [$sp], $srs + move [$sp], $srs addq 4, $sp SAVE_ALL move \mmu, $srs diff --git a/arch/cris/arch-v32/mm/tlb.c b/arch/cris/arch-v32/mm/tlb.c index a076ef6e9389..eda5ebcaea54 100644 --- a/arch/cris/arch-v32/mm/tlb.c +++ b/arch/cris/arch-v32/mm/tlb.c @@ -13,8 +13,8 @@ #include <asm/arch/hwregs/supp_reg.h> #define UPDATE_TLB_SEL_IDX(val) \ -do { \ - unsigned long tlb_sel; \ +do { \ + unsigned long tlb_sel; \ \ tlb_sel = REG_FIELD(mmu, rw_mm_tlb_sel, idx, val); \ SUPP_REG_WR(RW_MM_TLB_SEL, tlb_sel); \ @@ -30,8 +30,8 @@ do { \ * The TLB can host up to 256 different mm contexts at the same time. The running * context is found in the PID register. Each TLB entry contains a page_id that * has to match the PID register to give a hit. page_id_map keeps track of which - * mm is assigned to which page_id, making sure it's known when to invalidate TLB - * entries. + * mm's is assigned to which page_id's, making sure it's known when to + * invalidate TLB entries. * * The last page_id is never running, it is used as an invalid page_id so that * it's possible to make TLB entries that will nerver match. @@ -179,29 +179,29 @@ void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk) { - int cpu = smp_processor_id(); - - /* Make sure there is a MMU context. */ - spin_lock(&mmu_context_lock); - get_mmu_context(next); - cpu_set(cpu, next->cpu_vm_mask); - spin_unlock(&mmu_context_lock); - - /* - * Remember the pgd for the fault handlers. Keep a separate copy of it - * because current and active_mm might be invalid at points where - * there's still a need to derefer the pgd. - */ - per_cpu(current_pgd, cpu) = next->pgd; - - /* Switch context in the MMU. */ - if (tsk && task_thread_info(tsk)) - { - SPEC_REG_WR(SPEC_REG_PID, next->context.page_id | task_thread_info(tsk)->tls); - } - else - { - SPEC_REG_WR(SPEC_REG_PID, next->context.page_id); - } + if (prev != next) { + int cpu = smp_processor_id(); + + /* Make sure there is a MMU context. */ + spin_lock(&mmu_context_lock); + get_mmu_context(next); + cpu_set(cpu, next->cpu_vm_mask); + spin_unlock(&mmu_context_lock); + + /* + * Remember the pgd for the fault handlers. Keep a seperate + * copy of it because current and active_mm might be invalid + * at points where * there's still a need to derefer the pgd. + */ + per_cpu(current_pgd, cpu) = next->pgd; + + /* Switch context in the MMU. */ + if (tsk && task_thread_info(tsk)) { + SPEC_REG_WR(SPEC_REG_PID, next->context.page_id | + task_thread_info(tsk)->tls); + } else { + SPEC_REG_WR(SPEC_REG_PID, next->context.page_id); + } + } } diff --git a/arch/cris/arch-v32/vmlinux.lds.S b/arch/cris/arch-v32/vmlinux.lds.S index fead8c59ea63..d5f28e40717c 100644 --- a/arch/cris/arch-v32/vmlinux.lds.S +++ b/arch/cris/arch-v32/vmlinux.lds.S @@ -9,6 +9,13 @@ */ #include <asm-generic/vmlinux.lds.h> +#include <asm/page.h> + +#ifdef CONFIG_ETRAX_VMEM_SIZE +#define __CONFIG_ETRAX_VMEM_SIZE CONFIG_ETRAX_VMEM_SIZE +#else +#define __CONFIG_ETRAX_VMEM_SIZE 0 +#endif jiffies = jiffies_64; SECTIONS @@ -17,18 +24,19 @@ SECTIONS dram_start = .; ebp_start = .; - /* The boot section is only necessary until the VCS top level testbench */ - /* includes both flash and DRAM. */ + /* The boot section is only necessary until the VCS top */ + /* level testbench includes both flash and DRAM. */ .boot : { *(.boot) } - . = DRAM_VIRTUAL_BASE + 0x4000; /* See head.S and pages reserved at the start. */ + /* See head.S and pages reserved at the start. */ + . = DRAM_VIRTUAL_BASE + 0x4000; _text = .; /* Text and read-only data. */ text_start = .; /* Lots of aliases. */ _stext = .; __stext = .; .text : { - *(.text) + TEXT_TEXT SCHED_TEXT LOCK_TEXT *(.fixup) @@ -39,9 +47,9 @@ SECTIONS __etext = .; . = ALIGN(4); /* Exception table. */ - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; RODATA @@ -54,33 +62,27 @@ SECTIONS __edata = . ; /* End of data section. */ _edata = . ; - . = ALIGN(8192); /* init_task and stack, must be aligned. */ - .data.init_task : { *(.data.init_task) } + . = ALIGN(PAGE_SIZE); /* init_task and stack, must be aligned. */ + .data.init_task : { *(.data.init_task) } - . = ALIGN(8192); /* Init code and data. */ - __init_begin = .; + . = ALIGN(PAGE_SIZE); /* Init code and data. */ + __init_begin = .; .init.text : { _sinittext = .; INIT_TEXT _einittext = .; } .init.data : { INIT_DATA } - . = ALIGN(16); - __setup_start = .; - .init.setup : { *(.init.setup) } - __setup_end = .; + . = ALIGN(16); + __setup_start = .; + .init.setup : { *(.init.setup) } + __setup_end = .; __start___param = .; __param : { *(__param) } __stop___param = .; - .initcall.init : { + .initcall.init : { __initcall_start = .; - *(.initcall1.init); - *(.initcall2.init); - *(.initcall3.init); - *(.initcall4.init); - *(.initcall5.init); - *(.initcall6.init); - *(.initcall7.init); + INITCALLS __initcall_end = .; } @@ -91,25 +93,23 @@ SECTIONS } SECURITY_INIT - PERCPU(8192) + __vmlinux_end = .; /* Last address of the physical file. */ + PERCPU(PAGE_SIZE) -#ifdef CONFIG_BLK_DEV_INITRD .init.ramfs : { __initramfs_start = .; *(.init.ramfs) __initramfs_end = .; - /* - * We fill to the next page, so we can discard all init - * pages without needing to consider what payload might be - * appended to the kernel image. - */ - FILL (0); - . = ALIGN (8192); } -#endif - __vmlinux_end = .; /* Last address of the physical file. */ - __init_end = .; + /* + * We fill to the next page, so we can discard all init + * pages without needing to consider what payload might be + * appended to the kernel image. + */ + . = ALIGN (PAGE_SIZE); + + __init_end = .; __data_end = . ; /* Move to _edata? */ __bss_start = .; /* BSS. */ @@ -123,11 +123,11 @@ SECTIONS __end = .; /* Sections to be discarded */ - /DISCARD/ : { + /DISCARD/ : { EXIT_TEXT EXIT_DATA *(.exitcall.exit) } - dram_end = dram_start + CONFIG_ETRAX_DRAM_SIZE*1024*1024; + dram_end = dram_start + (CONFIG_ETRAX_DRAM_SIZE - __CONFIG_ETRAX_VMEM_SIZE)*1024*1024; } diff --git a/arch/cris/artpec_3_defconfig b/arch/cris/artpec_3_defconfig new file mode 100644 index 000000000000..41fe67409aab --- /dev/null +++ b/arch/cris/artpec_3_defconfig @@ -0,0 +1,582 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc3 +# Mon Dec 3 11:18:54 2007 +# +CONFIG_MMU=y +CONFIG_ZONE_DMA=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_IOMAP=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NO_IOPORT=y +CONFIG_FORCE_MAX_ZONEORDER=6 +CONFIG_CRIS=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +# CONFIG_SYSVIPC is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# General setup +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_ETRAX_CMDLINE="root=/dev/mtdblock3 init=/linuxrc" +# CONFIG_ETRAX_WATCHDOG is not set +CONFIG_ETRAX_FAST_TIMER=y +# CONFIG_ETRAX_KMALLOCED_MODULES is not set +# CONFIG_OOM_REBOOT is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y + +# +# Hardware setup +# +# CONFIG_ETRAX100LX is not set +# CONFIG_ETRAX100LX_V2 is not set +# CONFIG_SVINTO_SIM is not set +# CONFIG_ETRAXFS is not set +CONFIG_CRIS_MACH_ARTPEC3=y +# CONFIG_ETRAX_VCS_SIM is not set +# CONFIG_ETRAX_ARCH_V10 is not set +CONFIG_ETRAX_ARCH_V32=y +CONFIG_ETRAX_DRAM_SIZE=32 +CONFIG_ETRAX_VMEM_SIZE=8 +CONFIG_ETRAX_FLASH_BUSWIDTH=2 +CONFIG_ETRAX_NANDFLASH_BUSWIDTH=1 +CONFIG_ETRAX_FLASH1_SIZE=4 +CONFIG_ETRAX_DEBUG_PORT0=y +# CONFIG_ETRAX_DEBUG_PORT1 is not set +# CONFIG_ETRAX_DEBUG_PORT2 is not set +# CONFIG_ETRAX_DEBUG_PORT3 is not set +# CONFIG_ETRAX_DEBUG_PORT_NULL is not set +CONFIG_ETRAX_DRAM_VIRTUAL_BASE=c0000000 +CONFIG_ETRAX_SERIAL_PORTS=5 +CONFIG_ETRAX_DEF_GIO_PA_OE=1c +CONFIG_ETRAX_DEF_GIO_PA_OUT=00 +CONFIG_ETRAX_DEF_GIO_PB_OE=00000 +CONFIG_ETRAX_DEF_GIO_PB_OUT=00000 +CONFIG_ETRAX_DEF_GIO_PC_OE=00000 +CONFIG_ETRAX_DEF_GIO_PC_OUT=00000 + +# +# Artpec-3 options +# +CONFIG_ETRAX_L2CACHE=y +CONFIG_ETRAX_DDR=y +CONFIG_ETRAX_DDR2_MRS=0 +CONFIG_ETRAX_DDR2_TIMING=0 +CONFIG_ETRAX_DDR2_CONFIG=0 +CONFIG_ETRAX_PIO_CE0_CFG=0 +CONFIG_ETRAX_PIO_CE1_CFG=0 +CONFIG_ETRAX_PIO_CE2_CFG=0 +# CONFIG_CPU_FREQ is not set +# CONFIG_ETRAX_NBR_LED_GRP_ZERO is not set +CONFIG_ETRAX_NBR_LED_GRP_ONE=y +# CONFIG_ETRAX_NBR_LED_GRP_TWO is not set +CONFIG_ETRAX_LED_G_NET0="PA3" +CONFIG_ETRAX_LED_R_NET0="PA4" +CONFIG_ETRAX_V32_LED2G="PA5" +CONFIG_ETRAX_V32_LED2R="PA6" +CONFIG_ETRAX_V32_LED3G="PA7" +CONFIG_ETRAX_V32_LED3R="PA7" + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_XTABLES is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Drivers for built-in interfaces +# +CONFIG_ETRAX_ETHERNET=y +# CONFIG_ETRAX_IDE is not set +CONFIG_ETRAX_AXISFLASHMAP=y +CONFIG_ETRAX_PTABLE_SECTOR=65536 +# CONFIG_ETRAX_I2C is not set +# CONFIG_ETRAX_GPIO is not set +# CONFIG_ETRAX_NO_PHY is not set +# CONFIG_ETRAX_ETHERNET_IFACE0 is not set +# CONFIG_ETRAX_ETHERNET_GBIT is not set +# CONFIG_ETRAXFS_SERIAL is not set +# CONFIG_ETRAX_SYNCHRONOUS_SERIAL is not set +# CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE is not set +# CONFIG_ETRAX_NANDFLASH is not set +# CONFIG_ETRAX_CARDBUS is not set +# CONFIG_ETRAX_IOP_FW_LOAD is not set +# CONFIG_ETRAX_STREAMCOPROC is not set +# CONFIG_ETRAX_SPI_MMC is not set +# CONFIG_ETRAX_SPI_MMC_BOARD is not set +# CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK is not set +CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY=y + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +CONFIG_MTD_MTDRAM=y +CONFIG_MTDRAM_TOTAL_SIZE=0 +CONFIG_MTDRAM_ERASE_SIZE=64 +CONFIG_MTDRAM_ABS_POS=0x0 +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_RTC_CLASS is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +CONFIG_HW_RANDOM=y +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PROFILING is not set +# CONFIG_SYSTEM_PROFILER is not set +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SAMPLES is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_DMA=y diff --git a/arch/cris/defconfig b/arch/cris/defconfig index 9c33ae659934..59f36a58f842 100644 --- a/arch/cris/defconfig +++ b/arch/cris/defconfig @@ -1,52 +1,91 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11 -# Mon Jun 20 13:42:02 2005 +# Linux kernel version: 2.6.24-rc3 +# Mon Dec 3 11:34:27 2007 # CONFIG_MMU=y -CONFIG_UID16=y +CONFIG_ZONE_DMA=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_IOMAP=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NO_IOPORT=y +CONFIG_FORCE_MAX_ZONEORDER=6 CONFIG_CRIS=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y - -# -# General setup -# +CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set # CONFIG_SYSVIPC is not set # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # -# Loadable module support +# IO Schedulers # -# CONFIG_MODULES is not set +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" # # General setup @@ -54,12 +93,27 @@ CONFIG_CC_ALIGN_JUMPS=0 CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_GENERIC_HARDIRQS=y -# CONFIG_SMP is not set CONFIG_ETRAX_CMDLINE="root=/dev/mtdblock3 init=/linuxrc" # CONFIG_ETRAX_WATCHDOG is not set CONFIG_ETRAX_FAST_TIMER=y -# CONFIG_PREEMPT is not set +# CONFIG_ETRAX_KMALLOCED_MODULES is not set # CONFIG_OOM_REBOOT is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y # # Hardware setup @@ -68,127 +122,180 @@ CONFIG_ETRAX_FAST_TIMER=y CONFIG_ETRAX100LX_V2=y # CONFIG_SVINTO_SIM is not set # CONFIG_ETRAXFS is not set -# CONFIG_ETRAXFS_SIM is not set +# CONFIG_CRIS_MACH_ARTPEC3 is not set +# CONFIG_ETRAX_VCS_SIM is not set CONFIG_ETRAX_ARCH_V10=y # CONFIG_ETRAX_ARCH_V32 is not set CONFIG_ETRAX_DRAM_SIZE=32 CONFIG_ETRAX_FLASH_BUSWIDTH=2 +CONFIG_ETRAX_NANDFLASH_BUSWIDTH=1 CONFIG_ETRAX_FLASH1_SIZE=4 +# CONFIG_ETRAX_DEBUG_PORT0 is not set +# CONFIG_ETRAX_DEBUG_PORT1 is not set +# CONFIG_ETRAX_DEBUG_PORT2 is not set +# CONFIG_ETRAX_DEBUG_PORT3 is not set +CONFIG_ETRAX_DEBUG_PORT_NULL=y + +# +# CRIS v10 options +# CONFIG_ETRAX_DRAM_VIRTUAL_BASE=c0000000 CONFIG_ETRAX_PA_LEDS=y # CONFIG_ETRAX_PB_LEDS is not set # CONFIG_ETRAX_CSP0_LEDS is not set # CONFIG_ETRAX_NO_LEDS is not set CONFIG_ETRAX_LED1G=2 -CONFIG_ETRAX_LED1R=2 -CONFIG_ETRAX_LED2G=3 -CONFIG_ETRAX_LED2R=3 +CONFIG_ETRAX_LED1R=3 +CONFIG_ETRAX_LED2G=4 +CONFIG_ETRAX_LED2R=5 CONFIG_ETRAX_LED3G=2 CONFIG_ETRAX_LED3R=2 -CONFIG_ETRAX_DEBUG_PORT0=y -# CONFIG_ETRAX_DEBUG_PORT1 is not set -# CONFIG_ETRAX_DEBUG_PORT2 is not set -# CONFIG_ETRAX_DEBUG_PORT3 is not set -# CONFIG_ETRAX_DEBUG_PORT_NULL is not set CONFIG_ETRAX_RESCUE_SER0=y # CONFIG_ETRAX_RESCUE_SER1 is not set # CONFIG_ETRAX_RESCUE_SER2 is not set # CONFIG_ETRAX_RESCUE_SER3 is not set -CONFIG_ETRAX_DEF_R_WAITSTATES=0x95a6 -CONFIG_ETRAX_DEF_R_BUS_CONFIG=0x4 -CONFIG_ETRAX_SDRAM=y -CONFIG_ETRAX_DEF_R_SDRAM_CONFIG=0x09e05757 -CONFIG_ETRAX_DEF_R_SDRAM_TIMING=0x80008002 -CONFIG_ETRAX_DEF_R_PORT_PA_DIR=0x1d -CONFIG_ETRAX_DEF_R_PORT_PA_DATA=0x00 -CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG=0x00 -CONFIG_ETRAX_DEF_R_PORT_PB_DIR=0x1e -CONFIG_ETRAX_DEF_R_PORT_PB_DATA=0xf3 +CONFIG_ETRAX_DEF_R_WAITSTATES=95a6 +CONFIG_ETRAX_DEF_R_BUS_CONFIG=104 +# CONFIG_ETRAX_SDRAM is not set +CONFIG_ETRAX_DEF_R_DRAM_CONFIG=1a200040 +CONFIG_ETRAX_DEF_R_DRAM_TIMING=5611 +CONFIG_ETRAX_DEF_R_PORT_PA_DIR=1c +CONFIG_ETRAX_DEF_R_PORT_PA_DATA=00 +CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG=00 +CONFIG_ETRAX_DEF_R_PORT_PB_DIR=00 +CONFIG_ETRAX_DEF_R_PORT_PB_DATA=ff # CONFIG_ETRAX_SOFT_SHUTDOWN is not set # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_XTABLES is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# # Drivers for built-in interfaces # CONFIG_ETRAX_ETHERNET=y -# CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK is not set -CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY=y CONFIG_ETRAX_SERIAL=y # CONFIG_ETRAX_SERIAL_FAST_TIMER is not set # CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST is not set CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS=5 -CONFIG_ETRAX_SERIAL_PORT0=y -# CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_OUT is not set -CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT=y -# CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_IN is not set -CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN=y -CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_NONE=y -# CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_PA is not set -# CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_PB is not set -# CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED is not set -CONFIG_ETRAX_SER0_DTR_ON_PA_BIT=-1 -CONFIG_ETRAX_SER0_RI_ON_PA_BIT=-1 -CONFIG_ETRAX_SER0_DSR_ON_PA_BIT=-1 -CONFIG_ETRAX_SER0_CD_ON_PA_BIT=-1 -CONFIG_ETRAX_SER0_DTR_ON_PB_BIT=-1 -CONFIG_ETRAX_SER0_RI_ON_PB_BIT=-1 -CONFIG_ETRAX_SER0_DSR_ON_PB_BIT=-1 -CONFIG_ETRAX_SER0_CD_ON_PB_BIT=-1 +# CONFIG_ETRAX_SERIAL_PORT0 is not set # CONFIG_ETRAX_SERIAL_PORT1 is not set -CONFIG_ETRAX_SERIAL_PORT2=y -# CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_OUT is not set -CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT=y -# CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_IN is not set -CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN=y -CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_NONE=y -# CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_PA is not set -# CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_PB is not set -# CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED is not set -CONFIG_ETRAX_SER2_DTR_ON_PA_BIT=-1 -CONFIG_ETRAX_SER2_RI_ON_PA_BIT=-1 -CONFIG_ETRAX_SER2_DSR_ON_PA_BIT=-1 -CONFIG_ETRAX_SER2_CD_ON_PA_BIT=-1 -CONFIG_ETRAX_SER2_DTR_ON_PB_BIT=-1 -CONFIG_ETRAX_SER2_RI_ON_PB_BIT=-1 -CONFIG_ETRAX_SER2_DSR_ON_PB_BIT=-1 -CONFIG_ETRAX_SER2_CD_ON_PB_BIT=-1 +# CONFIG_ETRAX_SERIAL_PORT2 is not set # CONFIG_ETRAX_SERIAL_PORT3 is not set -CONFIG_ETRAX_RS485=y -# CONFIG_ETRAX_RS485_ON_PA is not set -# CONFIG_ETRAX_RS485_DISABLE_RECEIVER is not set -CONFIG_ETRAX_IDE=y -CONFIG_ETRAX_IDE_DELAY=15 -CONFIG_ETRAX_IDE_PB7_RESET=y -# CONFIG_ETRAX_IDE_G27_RESET is not set -CONFIG_ETRAX_USB_HOST=y -CONFIG_ETRAX_USB_HOST_PORT1=y -CONFIG_ETRAX_USB_HOST_PORT2=y +# CONFIG_ETRAX_RS485 is not set +# CONFIG_ETRAX_IDE is not set +# CONFIG_ETRAX_USB_HOST is not set CONFIG_ETRAX_AXISFLASHMAP=y CONFIG_ETRAX_PTABLE_SECTOR=65536 # CONFIG_ETRAX_I2C is not set # CONFIG_ETRAX_GPIO is not set -CONFIG_ETRAX_RTC=y -CONFIG_ETRAX_DS1302=y -# CONFIG_ETRAX_PCF8563 is not set -CONFIG_ETRAX_DS1302_RST_ON_GENERIC_PORT=y -CONFIG_ETRAX_DS1302_RSTBIT=0 -CONFIG_ETRAX_DS1302_SCLBIT=1 -CONFIG_ETRAX_DS1302_SDABIT=0 -CONFIG_ETRAX_DS1302_TRICKLE_CHARGE=0 +# CONFIG_ETRAX_RTC is not set +# CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK is not set +CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY=y # # Generic Driver Options # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Memory Technology Devices (MTD) -# +# CONFIG_SYS_HYPERVISOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set @@ -196,16 +303,20 @@ CONFIG_MTD_CONCAT=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers # CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_JEDECPROBE=y CONFIG_MTD_GEN_PROBE=y # CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y @@ -220,20 +331,18 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I8 is not set # CONFIG_MTD_CFI_INTELEXT is not set CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_AMDSTD_RETRY=0 # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_SHARP is not set -# CONFIG_MTD_JEDEC is not set # # Mapping drivers for chip access # CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -244,7 +353,6 @@ CONFIG_MTD_MTDRAM=y CONFIG_MTDRAM_TOTAL_SIZE=0 CONFIG_MTDRAM_ERASE_SIZE=64 CONFIG_MTDRAM_ABS_POS=0x0 -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -253,216 +361,54 @@ CONFIG_MTDRAM_ABS_POS=0x0 # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set # -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support +# UBI - Unsorted block images # - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set +# CONFIG_MTD_UBI is not set +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_INITRAMFS_SOURCE="" +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -# CONFIG_IOSCHED_DEADLINE is not set -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set -# CONFIG_PARIDE is not set - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -# CONFIG_IDE_GENERIC is not set -# CONFIG_IDE_ARM is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_SCSI is not set -# CONFIG_ISCSI_TCP is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# IP: Netfilter Configuration -# -# CONFIG_IP_NF_CONNTRACK is not set -# CONFIG_IP_NF_CONNTRACK_MARK is not set -# CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_ARPTABLES is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_AF_RXRPC is not set -# CONFIG_AF_RXRPC_DEBUG is not set -# CONFIG_BT is not set -# CONFIG_I2C is not set - CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set +CONFIG_MII=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_RTC_CLASS is not set # # Input device support @@ -470,7 +416,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_INPUT is not set # -# Input I/O drivers +# Hardware I/O ports # CONFIG_SERIO=y # CONFIG_SERIO_I8042 is not set @@ -480,94 +426,39 @@ CONFIG_SERIO=y # CONFIG_GAMEPORT is not set # -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# # Character devices # # CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set -# CONFIG_RTC_LIB is not set -# CONFIG_RTC_CLASS is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set - -# -# XFS support -# +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -587,13 +478,12 @@ CONFIG_DNOTIFY=y # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -605,15 +495,15 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -CONFIG_JFFS_FS=y -CONFIG_JFFS_FS_VERBOSE=0 -# CONFIG_JFFS_PROC_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y @@ -622,12 +512,10 @@ CONFIG_CRAMFS=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set @@ -649,181 +537,44 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# Generic devices -# -# CONFIG_SND_MPU401_UART is not set -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_VIRMIDI is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set -# CONFIG_PARPORT_PC_PCMCIA is not set -# CONFIG_NET_PCMCIA is not set - -# -# PC-card bridges -# - -# -# USB support -# -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# - -# -# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# -# CONFIG_USB_STORAGE is not set - -# -# USB Input Devices -# -# CONFIG_USB_HID is not set -# HID_SUPPORT is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -CONFIG_USB_RTL8150=y -# CONFIG_USB_USBNET is not set - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_TEST is not set - -# -# USB ATM/DSL drivers -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set +# CONFIG_DLM is not set # # Kernel hacking # # CONFIG_PROFILING is not set # CONFIG_SYSTEM_PROFILER is not set -# CONFIG_ETRAX_KGDB is not set -# CONFIG_DEBUG_INFO is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_DEBUG_NMI_OOPS is not set +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SAMPLES is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # -# Hardware crypto devices -# CONFIG_CRYPTO_HW is not set - -# # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_DMA=y diff --git a/arch/cris/etraxfs_defconfig b/arch/cris/etraxfs_defconfig new file mode 100644 index 000000000000..73c646a37255 --- /dev/null +++ b/arch/cris/etraxfs_defconfig @@ -0,0 +1,585 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc3 +# Fri Nov 30 14:24:26 2007 +# +CONFIG_MMU=y +CONFIG_ZONE_DMA=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_IOMAP=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NO_IOPORT=y +CONFIG_FORCE_MAX_ZONEORDER=6 +CONFIG_CRIS=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +# CONFIG_SYSVIPC is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# General setup +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_ETRAX_CMDLINE="root=/dev/mtdblock3 init=/linuxrc" +# CONFIG_ETRAX_WATCHDOG is not set +CONFIG_ETRAX_FAST_TIMER=y +# CONFIG_ETRAX_KMALLOCED_MODULES is not set +# CONFIG_OOM_REBOOT is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y + +# +# Hardware setup +# +# CONFIG_ETRAX100LX is not set +# CONFIG_ETRAX100LX_V2 is not set +# CONFIG_SVINTO_SIM is not set +CONFIG_ETRAXFS=y +# CONFIG_CRIS_MACH_ARTPEC3 is not set +# CONFIG_ETRAX_VCS_SIM is not set +# CONFIG_ETRAX_ARCH_V10 is not set +CONFIG_ETRAX_ARCH_V32=y +CONFIG_ETRAX_DRAM_SIZE=32 +CONFIG_ETRAX_FLASH_BUSWIDTH=2 +CONFIG_ETRAX_NANDFLASH_BUSWIDTH=1 +CONFIG_ETRAX_FLASH1_SIZE=4 +CONFIG_ETRAX_DEBUG_PORT0=y +# CONFIG_ETRAX_DEBUG_PORT1 is not set +# CONFIG_ETRAX_DEBUG_PORT2 is not set +# CONFIG_ETRAX_DEBUG_PORT3 is not set +# CONFIG_ETRAX_DEBUG_PORT_NULL is not set +CONFIG_ETRAX_DRAM_VIRTUAL_BASE=c0000000 + +# +# ETRAX FS options +# +CONFIG_ETRAX_SERIAL_PORTS=4 +CONFIG_ETRAX_MEM_GRP1_CONFIG=4044a +CONFIG_ETRAX_MEM_GRP2_CONFIG=0 +CONFIG_ETRAX_MEM_GRP3_CONFIG=0 +CONFIG_ETRAX_MEM_GRP4_CONFIG=0 +CONFIG_ETRAX_SDRAM_GRP0_CONFIG=336 +CONFIG_ETRAX_SDRAM_GRP1_CONFIG=0 +CONFIG_ETRAX_SDRAM_TIMING=104a +CONFIG_ETRAX_SDRAM_COMMAND=0 +CONFIG_ETRAX_DEF_GIO_PA_OE=1c +CONFIG_ETRAX_DEF_GIO_PA_OUT=00 +CONFIG_ETRAX_DEF_GIO_PB_OE=00000 +CONFIG_ETRAX_DEF_GIO_PB_OUT=00000 +CONFIG_ETRAX_DEF_GIO_PC_OE=00000 +CONFIG_ETRAX_DEF_GIO_PC_OUT=00000 +CONFIG_ETRAX_DEF_GIO_PD_OE=00000 +CONFIG_ETRAX_DEF_GIO_PD_OUT=00000 +CONFIG_ETRAX_DEF_GIO_PE_OE=00000 +CONFIG_ETRAX_DEF_GIO_PE_OUT=00000 +# CONFIG_CPU_FREQ is not set +# CONFIG_ETRAX_NBR_LED_GRP_ZERO is not set +CONFIG_ETRAX_NBR_LED_GRP_ONE=y +# CONFIG_ETRAX_NBR_LED_GRP_TWO is not set +CONFIG_ETRAX_LED_G_NET0="PA3" +CONFIG_ETRAX_LED_R_NET0="PA4" +CONFIG_ETRAX_V32_LED2G="PA5" +CONFIG_ETRAX_V32_LED2R="PA6" +CONFIG_ETRAX_V32_LED3G="PA7" +CONFIG_ETRAX_V32_LED3R="PA7" + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_XTABLES is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Drivers for built-in interfaces +# +CONFIG_ETRAX_ETHERNET=y +# CONFIG_ETRAX_IDE is not set +CONFIG_ETRAX_AXISFLASHMAP=y +CONFIG_ETRAX_PTABLE_SECTOR=65536 +# CONFIG_ETRAX_I2C is not set +# CONFIG_ETRAX_GPIO is not set +# CONFIG_ETRAX_NO_PHY is not set +# CONFIG_ETRAX_ETHERNET_IFACE0 is not set +# CONFIG_ETRAX_ETHERNET_IFACE1 is not set +# CONFIG_ETRAXFS_SERIAL is not set +# CONFIG_ETRAX_SYNCHRONOUS_SERIAL is not set +# CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE is not set +# CONFIG_ETRAX_NANDFLASH is not set +# CONFIG_ETRAX_CARDBUS is not set +# CONFIG_ETRAX_IOP_FW_LOAD is not set +# CONFIG_ETRAX_STREAMCOPROC is not set +# CONFIG_ETRAX_SPI_MMC is not set +# CONFIG_ETRAX_SPI_MMC_BOARD is not set +# CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK is not set +CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY=y + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +CONFIG_MTD_MTDRAM=y +CONFIG_MTDRAM_TOTAL_SIZE=0 +CONFIG_MTDRAM_ERASE_SIZE=64 +CONFIG_MTDRAM_ABS_POS=0x0 +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_RTC_CLASS is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +CONFIG_HW_RANDOM=y +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PROFILING is not set +# CONFIG_SYSTEM_PROFILER is not set +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SAMPLES is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_DMA=y diff --git a/arch/cris/kernel/module.c b/arch/cris/kernel/module.c index 11b867df8617..a187833febc8 100644 --- a/arch/cris/kernel/module.c +++ b/arch/cris/kernel/module.c @@ -28,20 +28,28 @@ #define DEBUGP(fmt , ...) #endif +#ifdef CONFIG_ETRAX_KMALLOCED_MODULES +#define MALLOC_MODULE(size) kmalloc(size, GFP_KERNEL) +#define FREE_MODULE(region) kfree(region) +#else +#define MALLOC_MODULE(size) vmalloc_exec(size) +#define FREE_MODULE(region) vfree(region) +#endif + void *module_alloc(unsigned long size) { if (size == 0) return NULL; - return vmalloc_exec(size); + return MALLOC_MODULE(size); } /* Free memory returned from module_alloc */ void module_free(struct module *mod, void *module_region) { - vfree(module_region); + FREE_MODULE(module_region); /* FIXME: If module_region == mod->init_region, trim exception - table entries. */ + table entries. */ } /* We don't need anything special. */ diff --git a/arch/cris/kernel/process.c b/arch/cris/kernel/process.c index 9ca558fc5bc8..ef2db8fd102a 100644 --- a/arch/cris/kernel/process.c +++ b/arch/cris/kernel/process.c @@ -1,5 +1,4 @@ -/* $Id: process.c,v 1.21 2005/03/04 08:16:17 starvik Exp $ - * +/* * linux/arch/cris/kernel/process.c * * Copyright (C) 1995 Linus Torvalds @@ -7,105 +6,6 @@ * * Authors: Bjorn Wesen (bjornw@axis.com) * - * $Log: process.c,v $ - * Revision 1.21 2005/03/04 08:16:17 starvik - * Merge of Linux 2.6.11. - * - * Revision 1.20 2005/01/18 05:57:22 starvik - * Renamed hlt_counter to cris_hlt_counter and made it global. - * - * Revision 1.19 2004/10/19 13:07:43 starvik - * Merge of Linux 2.6.9 - * - * Revision 1.18 2004/08/16 12:37:23 starvik - * Merge of Linux 2.6.8 - * - * Revision 1.17 2004/04/05 13:53:48 starvik - * Merge of Linux 2.6.5 - * - * Revision 1.16 2003/10/27 08:04:33 starvik - * Merge of Linux 2.6.0-test9 - * - * Revision 1.15 2003/09/11 07:29:52 starvik - * Merge of Linux 2.6.0-test5 - * - * Revision 1.14 2003/06/10 10:21:12 johana - * Moved thread_saved_pc() from arch/cris/kernel/process.c to - * subarch specific process.c. arch-v32 has an erp, no irp. - * - * Revision 1.13 2003/04/09 05:20:47 starvik - * Merge of Linux 2.5.67 - * - * Revision 1.12 2002/12/11 15:41:11 starvik - * Extracted v10 (ETRAX 100LX) specific stuff to arch/cris/arch-v10/kernel - * - * Revision 1.11 2002/12/10 09:00:10 starvik - * Merge of Linux 2.5.51 - * - * Revision 1.10 2002/11/27 08:42:34 starvik - * Argument to user_regs() is thread_info* - * - * Revision 1.9 2002/11/26 09:44:21 starvik - * New threads exits through ret_from_fork (necessary for preemptive scheduling) - * - * Revision 1.8 2002/11/19 14:35:24 starvik - * Changes from linux 2.4 - * Changed struct initializer syntax to the currently prefered notation - * - * Revision 1.7 2002/11/18 07:39:42 starvik - * thread_saved_pc moved here from processor.h - * - * Revision 1.6 2002/11/14 06:51:27 starvik - * Made cpu_idle more similar with other archs - * init_task_union -> init_thread_union - * Updated for new interrupt macros - * sys_clone and do_fork have a new argument, user_tid - * - * Revision 1.5 2002/11/05 06:45:11 starvik - * Merge of Linux 2.5.45 - * - * Revision 1.4 2002/02/05 15:37:44 bjornw - * Need init_task.h - * - * Revision 1.3 2002/01/21 15:22:49 bjornw - * current->counter is gone - * - * Revision 1.22 2001/11/13 09:40:43 orjanf - * Added dump_fpu (needed for core dumps). - * - * Revision 1.21 2001/11/12 18:26:21 pkj - * Fixed compiler warnings. - * - * Revision 1.20 2001/10/03 08:21:39 jonashg - * cause_of_death does not exist if CONFIG_SVINTO_SIM is defined. - * - * Revision 1.19 2001/09/26 11:52:54 bjornw - * INIT_MMAP is gone in 2.4.10 - * - * Revision 1.18 2001/08/21 21:43:51 hp - * Move last watchdog fix inside #ifdef CONFIG_ETRAX_WATCHDOG - * - * Revision 1.17 2001/08/21 13:48:01 jonashg - * Added fix by HP to avoid oops when doing a hard_reset_now. - * - * Revision 1.16 2001/06/21 02:00:40 hp - * * entry.S: Include asm/unistd.h. - * (_sys_call_table): Use section .rodata, not .data. - * (_kernel_thread): Move from... - * * process.c: ... here. - * * entryoffsets.c (VAL): Break out from... - * (OF): Use VAL. - * (LCLONE_VM): New asmified value from CLONE_VM. - * - * Revision 1.15 2001/06/20 16:31:57 hp - * Add comments to describe empty functions according to review. - * - * Revision 1.14 2001/05/29 11:27:59 markusl - * Fixed so that hard_reset_now will do reset even if watchdog wasn't enabled - * - * Revision 1.13 2001/03/20 19:44:06 bjornw - * Use the 7th syscall argument for regs instead of current_regs - * */ /* @@ -206,6 +106,7 @@ EXPORT_SYMBOL(pm_power_off); * low exit latency (ie sit in a loop waiting for * somebody to say that they'd like to reschedule) */ + void cpu_idle (void) { /* endless idle loop with no priority at all */ diff --git a/arch/cris/kernel/ptrace.c b/arch/cris/kernel/ptrace.c index 3ccd20e85dce..b326023baab2 100644 --- a/arch/cris/kernel/ptrace.c +++ b/arch/cris/kernel/ptrace.c @@ -2,65 +2,11 @@ * linux/arch/cris/kernel/ptrace.c * * Parts taken from the m68k port. - * + * * Copyright (c) 2000, 2001, 2002 Axis Communications AB * * Authors: Bjorn Wesen * - * $Log: ptrace.c,v $ - * Revision 1.10 2004/09/22 11:50:01 orjanf - * * Moved get_reg/put_reg to arch-specific files. - * * Added functions to access debug registers (CRISv32). - * * Added support for PTRACE_SINGLESTEP (CRISv32). - * * Added S flag to CCS_MASK (CRISv32). - * - * Revision 1.9 2003/07/04 12:56:11 tobiasa - * Moved arch-specific code to arch-specific files. - * - * Revision 1.8 2003/04/09 05:20:47 starvik - * Merge of Linux 2.5.67 - * - * Revision 1.7 2002/11/27 08:42:34 starvik - * Argument to user_regs() is thread_info* - * - * Revision 1.6 2002/11/20 11:56:11 starvik - * Merge of Linux 2.5.48 - * - * Revision 1.5 2002/11/18 07:41:19 starvik - * Removed warning - * - * Revision 1.4 2002/11/11 12:47:28 starvik - * SYSCALL_TRACE has been moved to thread flags - * - * Revision 1.3 2002/02/05 15:37:18 bjornw - * * Add do_notify_resume (replaces do_signal in the callchain) - * * syscall_trace is now do_syscall_trace - * * current->ptrace flag PT_TRACESYS -> PT_SYSCALLTRACE - * * Keep track of the current->work.syscall_trace counter - * - * Revision 1.2 2001/12/18 13:35:20 bjornw - * Applied the 2.4.13->2.4.16 CRIS patch to 2.5.1 (is a copy of 2.4.15). - * - * Revision 1.8 2001/11/12 18:26:21 pkj - * Fixed compiler warnings. - * - * Revision 1.7 2001/09/26 11:53:49 bjornw - * PTRACE_DETACH works more simple in 2.4.10 - * - * Revision 1.6 2001/07/25 16:08:47 bjornw - * PTRACE_ATTACH bulk moved into arch-independent code in 2.4.7 - * - * Revision 1.5 2001/03/26 14:24:28 orjanf - * * Changed loop condition. - * * Added comment documenting non-standard ptrace behaviour. - * - * Revision 1.4 2001/03/20 19:44:41 bjornw - * Use the user_regs macro instead of thread.esp0 - * - * Revision 1.3 2000/12/18 23:45:25 bjornw - * Linux/CRIS first version - * - * */ #include <linux/kernel.h> @@ -85,7 +31,7 @@ extern int do_signal(int canrestart, struct pt_regs *regs); void do_notify_resume(int canrestart, struct pt_regs *regs, - __u32 thread_info_flags ) + __u32 thread_info_flags) { /* deal with pending signal delivery */ if (thread_info_flags & _TIF_SIGPENDING) diff --git a/arch/cris/kernel/semaphore.c b/arch/cris/kernel/semaphore.c index b884263d3cd4..f137a439041f 100644 --- a/arch/cris/kernel/semaphore.c +++ b/arch/cris/kernel/semaphore.c @@ -4,7 +4,6 @@ */ #include <linux/sched.h> -#include <linux/init.h> #include <asm/semaphore-helper.h> /* diff --git a/arch/cris/kernel/setup.c b/arch/cris/kernel/setup.c index c34fb235b09f..04d48dd91ddf 100644 --- a/arch/cris/kernel/setup.c +++ b/arch/cris/kernel/setup.c @@ -18,7 +18,7 @@ #include <linux/screen_info.h> #include <linux/utsname.h> #include <linux/pfn.h> - +#include <linux/cpu.h> #include <asm/setup.h> /* @@ -36,6 +36,8 @@ extern unsigned long dram_start, dram_end; extern unsigned long romfs_start, romfs_length, romfs_in_flash; /* from head.S */ +static struct cpu cpu_devices[NR_CPUS]; + extern void show_etrax_copyright(void); /* arch-vX/kernel/setup.c */ /* This mainly sets up the memory area, and can be really confusing. @@ -45,24 +47,23 @@ extern void show_etrax_copyright(void); /* arch-vX/kernel/setup.c */ * given by the macro __pa(). * * In this DRAM, the kernel code and data is loaded, in the beginning. - * It really starts at c0004000 to make room for some special pages - + * It really starts at c0004000 to make room for some special pages - * the start address is text_start. The kernel data ends at _end. After * this the ROM filesystem is appended (if there is any). - * + * * Between this address and dram_end, we have RAM pages usable to the * boot code and the system. * */ -void __init -setup_arch(char **cmdline_p) +void __init setup_arch(char **cmdline_p) { extern void init_etrax_debug(void); unsigned long bootmap_size; unsigned long start_pfn, max_pfn; unsigned long memory_start; - /* register an initial console printing routine for printk's */ + /* register an initial console printing routine for printk's */ init_etrax_debug(); @@ -121,7 +122,7 @@ setup_arch(char **cmdline_p) min_low_pfn = PAGE_OFFSET >> PAGE_SHIFT; bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn, - min_low_pfn, + min_low_pfn, max_low_pfn); /* And free all memory not belonging to the kernel (addr, size) */ @@ -187,4 +188,16 @@ const struct seq_operations cpuinfo_op = { .show = show_cpuinfo, }; +static int __init topology_init(void) +{ + int i; + + for_each_possible_cpu(i) { + return register_cpu(&cpu_devices[i], i); + } + + return 0; +} + +subsys_initcall(topology_init); diff --git a/arch/cris/kernel/time.c b/arch/cris/kernel/time.c index 7a2cc7efbcf8..ff4c6aa75def 100644 --- a/arch/cris/kernel/time.c +++ b/arch/cris/kernel/time.c @@ -1,5 +1,4 @@ -/* $Id: time.c,v 1.18 2005/03/04 08:16:17 starvik Exp $ - * +/* * linux/arch/cris/kernel/time.c * * Copyright (C) 1991, 1992, 1995 Linus Torvalds @@ -18,7 +17,7 @@ * Linux/CRIS specific code: * * Authors: Bjorn Wesen - * Johan Adolfsson + * Johan Adolfsson * */ @@ -208,10 +207,16 @@ cris_do_profile(struct pt_regs* regs) #endif #ifdef CONFIG_PROFILING - profile_tick(CPU_PROFILING); + profile_tick(CPU_PROFILING); #endif } +unsigned long long sched_clock(void) +{ + return (unsigned long long)jiffies * (1000000000 / HZ) + + get_ns_in_jiffie(); +} + static int __init init_udelay(void) { diff --git a/arch/cris/kernel/traps.c b/arch/cris/kernel/traps.c index 520d92205fed..541efbf09371 100644 --- a/arch/cris/kernel/traps.c +++ b/arch/cris/kernel/traps.c @@ -1,66 +1,78 @@ -/* $Id: traps.c,v 1.11 2005/01/24 16:03:19 orjanf Exp $ - * +/* * linux/arch/cris/traps.c * - * Here we handle the break vectors not used by the system call - * mechanism, as well as some general stack/register dumping + * Here we handle the break vectors not used by the system call + * mechanism, as well as some general stack/register dumping * things. - * - * Copyright (C) 2000-2002 Axis Communications AB + * + * Copyright (C) 2000-2007 Axis Communications AB * * Authors: Bjorn Wesen - * Hans-Peter Nilsson + * Hans-Peter Nilsson * */ #include <linux/init.h> #include <linux/module.h> + #include <asm/pgtable.h> #include <asm/uaccess.h> +extern void arch_enable_nmi(void); +extern void stop_watchdog(void); +extern void reset_watchdog(void); +extern void show_registers(struct pt_regs *regs); + +#ifdef CONFIG_DEBUG_BUGVERBOSE +extern void handle_BUG(struct pt_regs *regs); +#else +#define handle_BUG(regs) +#endif + static int kstack_depth_to_print = 24; -extern int raw_printk(const char *fmt, ...); +void (*nmi_handler)(struct pt_regs *); -void show_trace(unsigned long * stack) +void +show_trace(unsigned long *stack) { unsigned long addr, module_start, module_end; extern char _stext, _etext; int i; - raw_printk("\nCall Trace: "); + printk("\nCall Trace: "); - i = 1; - module_start = VMALLOC_START; - module_end = VMALLOC_END; + i = 1; + module_start = VMALLOC_START; + module_end = VMALLOC_END; - while (((long) stack & (THREAD_SIZE-1)) != 0) { - if (__get_user (addr, stack)) { + while (((long)stack & (THREAD_SIZE-1)) != 0) { + if (__get_user(addr, stack)) { /* This message matches "failing address" marked s390 in ksymoops, so lines containing it will not be filtered out by ksymoops. */ - raw_printk ("Failing address 0x%lx\n", (unsigned long)stack); + printk("Failing address 0x%lx\n", (unsigned long)stack); break; } stack++; - /* - * If the address is either in the text segment of the - * kernel, or in the region which contains vmalloc'ed - * memory, it *may* be the address of a calling - * routine; if so, print it so that someone tracing - * down the cause of the crash will be able to figure - * out the call path that was taken. - */ - if (((addr >= (unsigned long) &_stext) && - (addr <= (unsigned long) &_etext)) || - ((addr >= module_start) && (addr <= module_end))) { - if (i && ((i % 8) == 0)) - raw_printk("\n "); - raw_printk("[<%08lx>] ", addr); - i++; - } - } + /* + * If the address is either in the text segment of the + * kernel, or in the region which contains vmalloc'ed + * memory, it *may* be the address of a calling + * routine; if so, print it so that someone tracing + * down the cause of the crash will be able to figure + * out the call path that was taken. + */ + if (((addr >= (unsigned long)&_stext) && + (addr <= (unsigned long)&_etext)) || + ((addr >= module_start) && (addr <= module_end))) { + if (i && ((i % 8) == 0)) + printk("\n "); + printk("[<%08lx>] ", addr); + i++; + } + } } /* @@ -78,109 +90,149 @@ void show_trace(unsigned long * stack) * with the ksymoops maintainer. */ -void +void show_stack(struct task_struct *task, unsigned long *sp) { - unsigned long *stack, addr; - int i; + unsigned long *stack, addr; + int i; /* * debugging aid: "show_stack(NULL);" prints a * back trace. */ - if(sp == NULL) { + if (sp == NULL) { if (task) sp = (unsigned long*)task->thread.ksp; else sp = (unsigned long*)rdsp(); } - stack = sp; + stack = sp; - raw_printk("\nStack from %08lx:\n ", (unsigned long)stack); - for(i = 0; i < kstack_depth_to_print; i++) { - if (((long) stack & (THREAD_SIZE-1)) == 0) - break; - if (i && ((i % 8) == 0)) - raw_printk("\n "); - if (__get_user (addr, stack)) { + printk("\nStack from %08lx:\n ", (unsigned long)stack); + for (i = 0; i < kstack_depth_to_print; i++) { + if (((long)stack & (THREAD_SIZE-1)) == 0) + break; + if (i && ((i % 8) == 0)) + printk("\n "); + if (__get_user(addr, stack)) { /* This message matches "failing address" marked s390 in ksymoops, so lines containing it will not be filtered out by ksymoops. */ - raw_printk ("Failing address 0x%lx\n", (unsigned long)stack); + printk("Failing address 0x%lx\n", (unsigned long)stack); break; } stack++; - raw_printk("%08lx ", addr); - } + printk("%08lx ", addr); + } show_trace(sp); } -static void (*nmi_handler)(struct pt_regs*); -extern void arch_enable_nmi(void); +#if 0 +/* displays a short stack trace */ -void set_nmi_handler(void (*handler)(struct pt_regs*)) +int +show_stack(void) { - nmi_handler = handler; - arch_enable_nmi(); + unsigned long *sp = (unsigned long *)rdusp(); + int i; + + printk("Stack dump [0x%08lx]:\n", (unsigned long)sp); + for (i = 0; i < 16; i++) + printk("sp + %d: 0x%08lx\n", i*4, sp[i]); + return 0; } +#endif -void handle_nmi(struct pt_regs* regs) +void +dump_stack(void) { - if (nmi_handler) - nmi_handler(regs); + show_stack(NULL, NULL); +} +EXPORT_SYMBOL(dump_stack); + +void +set_nmi_handler(void (*handler)(struct pt_regs *)) +{ + nmi_handler = handler; + arch_enable_nmi(); } #ifdef CONFIG_DEBUG_NMI_OOPS -void oops_nmi_handler(struct pt_regs* regs) +void +oops_nmi_handler(struct pt_regs *regs) { - stop_watchdog(); - raw_printk("NMI!\n"); - show_registers(regs); + stop_watchdog(); + oops_in_progress = 1; + printk("NMI!\n"); + show_registers(regs); + oops_in_progress = 0; } -static int -__init oops_nmi_register(void) +static int __init +oops_nmi_register(void) { - set_nmi_handler(oops_nmi_handler); - return 0; + set_nmi_handler(oops_nmi_handler); + return 0; } __initcall(oops_nmi_register); #endif -#if 0 -/* displays a short stack trace */ - -int -show_stack() +/* + * This gets called from entry.S when the watchdog has bitten. Show something + * similiar to an Oops dump, and if the kernel is configured to be a nice + * doggy, then halt instead of reboot. + */ +void +watchdog_bite_hook(struct pt_regs *regs) { - unsigned long *sp = (unsigned long *)rdusp(); - int i; - raw_printk("Stack dump [0x%08lx]:\n", (unsigned long)sp); - for(i = 0; i < 16; i++) - raw_printk("sp + %d: 0x%08lx\n", i*4, sp[i]); - return 0; -} +#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY + local_irq_disable(); + stop_watchdog(); + show_registers(regs); + + while (1) + ; /* Do nothing. */ +#else + show_registers(regs); #endif +} -void dump_stack(void) +/* This is normally the Oops function. */ +void +die_if_kernel(const char *str, struct pt_regs *regs, long err) { - show_stack(NULL, NULL); -} + if (user_mode(regs)) + return; -EXPORT_SYMBOL(dump_stack); +#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY + /* + * This printout might take too long and could trigger + * the watchdog normally. If NICE_DOGGY is set, simply + * stop the watchdog during the printout. + */ + stop_watchdog(); +#endif -void __init -trap_init(void) -{ - /* Nothing needs to be done */ + handle_BUG(regs); + + printk("%s: %04lx\n", str, err & 0xffff); + + show_registers(regs); + + oops_in_progress = 0; + +#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY + reset_watchdog(); +#endif + do_exit(SIGSEGV); } -void spinning_cpu(void* addr) +void __init +trap_init(void) { - raw_printk("CPU %d spinning on %X\n", smp_processor_id(), addr); - dump_stack(); + /* Nothing needs to be done */ } diff --git a/arch/cris/mm/fault.c b/arch/cris/mm/fault.c index 3034f3ff950c..c4c76db90f9c 100644 --- a/arch/cris/mm/fault.c +++ b/arch/cris/mm/fault.c @@ -1,130 +1,9 @@ /* * linux/arch/cris/mm/fault.c * - * Copyright (C) 2000, 2001 Axis Communications AB - * - * Authors: Bjorn Wesen - * - * $Log: fault.c,v $ - * Revision 1.20 2005/03/04 08:16:18 starvik - * Merge of Linux 2.6.11. - * - * Revision 1.19 2005/01/14 10:07:59 starvik - * Fixed warning. - * - * Revision 1.18 2005/01/12 08:10:14 starvik - * Re-added the change of frametype when handling kernel page fault fixup - * for v10. This is necessary to avoid that the CPU remakes the faulting - * access. - * - * Revision 1.17 2005/01/11 13:53:05 starvik - * Use raw_printk. - * - * Revision 1.16 2004/12/17 11:39:41 starvik - * SMP support. - * - * Revision 1.15 2004/11/23 18:36:18 starvik - * Stack is now non-executable. - * Signal handler trampolines are placed in a reserved page mapped into all - * processes. - * - * Revision 1.14 2004/11/23 07:10:21 starvik - * Moved find_fixup_code to generic code. - * - * Revision 1.13 2004/11/23 07:00:54 starvik - * Actually use the execute permission bit in the MMU. This makes it possible - * to prevent e.g. attacks where executable code is put on the stack. - * - * Revision 1.12 2004/09/29 06:16:04 starvik - * Use instruction_pointer - * - * Revision 1.11 2004/05/14 07:58:05 starvik - * Merge of changes from 2.4 - * - * Revision 1.10 2003/10/27 14:51:24 starvik - * Removed debugcode - * - * Revision 1.9 2003/10/27 14:50:42 starvik - * Changed do_page_fault signature - * - * Revision 1.8 2003/07/04 13:02:48 tobiasa - * Moved code snippet from arch/cris/mm/fault.c that searches for fixup code - * to separate function in arch-specific files. - * - * Revision 1.7 2003/01/22 06:48:38 starvik - * Fixed warnings issued by GCC 3.2.1 - * - * Revision 1.6 2003/01/09 14:42:52 starvik - * Merge of Linux 2.5.55 - * - * Revision 1.5 2002/12/11 14:44:48 starvik - * Extracted v10 (ETRAX 100LX) specific stuff to arch/cris/arch-v10/mm - * - * Revision 1.4 2002/11/13 15:10:28 starvik - * pte_offset has been renamed to pte_offset_kernel - * - * Revision 1.3 2002/11/05 06:45:13 starvik - * Merge of Linux 2.5.45 - * - * Revision 1.2 2001/12/18 13:35:22 bjornw - * Applied the 2.4.13->2.4.16 CRIS patch to 2.5.1 (is a copy of 2.4.15). - * - * Revision 1.20 2001/11/22 13:34:06 bjornw - * * Bug workaround (LX TR89): force a rerun of the whole of an interrupted - * unaligned write, because the second half of the write will be corrupted - * otherwise. Affected unaligned writes spanning not-yet mapped pages. - * * Optimization: use the wr_rd bit in R_MMU_CAUSE to know whether a miss - * was due to a read or a write (before we didn't know this until the next - * restart of the interrupted instruction, thus wasting one fault-irq) - * - * Revision 1.19 2001/11/12 19:02:10 pkj - * Fixed compiler warnings. - * - * Revision 1.18 2001/07/18 22:14:32 bjornw - * Enable interrupts in the bulk of do_page_fault - * - * Revision 1.17 2001/07/18 13:07:23 bjornw - * * Detect non-existant PTE's in vmalloc pmd synchronization - * * Remove comment about fast-paths for VMALLOC_START etc, because all that - * was totally bogus anyway it turned out :) - * * Fix detection of vmalloc-area synchronization - * * Add some comments - * - * Revision 1.16 2001/06/13 00:06:08 bjornw - * current_pgd should be volatile - * - * Revision 1.15 2001/06/13 00:02:23 bjornw - * Use a separate variable to store the current pgd to avoid races in schedule - * - * Revision 1.14 2001/05/16 17:41:07 hp - * Last comment tweak further tweaked. - * - * Revision 1.13 2001/05/15 00:58:44 hp - * Expand a bit on the comment why we compare address >= TASK_SIZE rather - * than >= VMALLOC_START. - * - * Revision 1.12 2001/04/04 10:51:14 bjornw - * mmap_sem is grabbed for reading - * - * Revision 1.11 2001/03/23 07:36:07 starvik - * Corrected according to review remarks - * - * Revision 1.10 2001/03/21 16:10:11 bjornw - * CRIS_FRAME_FIXUP not needed anymore, use FRAME_NORMAL - * - * Revision 1.9 2001/03/05 13:22:20 bjornw - * Spell-fix and fix in vmalloc_fault handling - * - * Revision 1.8 2000/11/22 14:45:31 bjornw - * * 2.4.0-test10 removed the set_pgdir instantaneous kernel global mapping - * into all processes. Instead we fill in the missing PTE entries on demand. - * - * Revision 1.7 2000/11/21 16:39:09 bjornw - * fixup switches frametype - * - * Revision 1.6 2000/11/17 16:54:08 bjornw - * More detailed siginfo reporting + * Copyright (C) 2000-2006 Axis Communications AB * + * Authors: Bjorn Wesen * */ @@ -135,7 +14,6 @@ extern int find_fixup_code(struct pt_regs *); extern void die_if_kernel(const char *, struct pt_regs *, long); -extern int raw_printk(const char *fmt, ...); /* debug of low-level TLB reload */ #undef DEBUG @@ -164,8 +42,8 @@ unsigned long cris_signal_return_page; * address. * * error_code: - * bit 0 == 0 means no page found, 1 means protection fault - * bit 1 == 0 means read, 1 means write + * bit 0 == 0 means no page found, 1 means protection fault + * bit 1 == 0 means read, 1 means write * * If this routine detects a bad access, it returns 1, otherwise it * returns 0. @@ -181,9 +59,10 @@ do_page_fault(unsigned long address, struct pt_regs *regs, siginfo_t info; int fault; - D(printk("Page fault for %lX on %X at %lX, prot %d write %d\n", - address, smp_processor_id(), instruction_pointer(regs), - protection, writeaccess)); + D(printk(KERN_DEBUG + "Page fault for %lX on %X at %lX, prot %d write %d\n", + address, smp_processor_id(), instruction_pointer(regs), + protection, writeaccess)); tsk = current; @@ -233,7 +112,7 @@ do_page_fault(unsigned long address, struct pt_regs *regs, * context, we must not take the fault.. */ - if (in_atomic() || !mm) + if (in_interrupt() || !mm) goto no_context; down_read(&mm->mmap_sem); @@ -319,6 +198,9 @@ do_page_fault(unsigned long address, struct pt_regs *regs, /* info.si_code has been set above */ info.si_addr = (void *)address; force_sig_info(SIGSEGV, &info, tsk); + printk(KERN_NOTICE "%s (pid %d) segfaults for page " + "address %08lx at pc %08lx\n", + tsk->comm, tsk->pid, address, instruction_pointer(regs)); return; } @@ -326,7 +208,7 @@ do_page_fault(unsigned long address, struct pt_regs *regs, /* Are we prepared to handle this kernel fault? * - * (The kernel has valid exception-points in the source + * (The kernel has valid exception-points in the source * when it acesses user-memory. When it fails in one * of those points, we find it in a table and do a jump * to some fixup code that loads an appropriate error @@ -341,13 +223,18 @@ do_page_fault(unsigned long address, struct pt_regs *regs, * terminate things with extreme prejudice. */ - if ((unsigned long) (address) < PAGE_SIZE) - raw_printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference"); - else - raw_printk(KERN_ALERT "Unable to handle kernel access"); - raw_printk(" at virtual address %08lx\n",address); - - die_if_kernel("Oops", regs, (writeaccess << 1) | protection); + if (!oops_in_progress) { + oops_in_progress = 1; + if ((unsigned long) (address) < PAGE_SIZE) + printk(KERN_ALERT "Unable to handle kernel NULL " + "pointer dereference"); + else + printk(KERN_ALERT "Unable to handle kernel access" + " at virtual address %08lx\n", address); + + die_if_kernel("Oops", regs, (writeaccess << 1) | protection); + oops_in_progress = 0; + } do_exit(SIGKILL); @@ -360,7 +247,7 @@ do_page_fault(unsigned long address, struct pt_regs *regs, up_read(&mm->mmap_sem); printk("VM: killing process %s\n", tsk->comm); if (user_mode(regs)) - do_group_exit(SIGKILL); + do_exit(SIGKILL); goto no_context; do_sigbus: @@ -406,8 +293,8 @@ vmalloc_fault: /* Since we're two-level, we don't need to do both * set_pgd and set_pmd (they do the same thing). If * we go three-level at some point, do the right thing - * with pgd_present and set_pgd here. - * + * with pgd_present and set_pgd here. + * * Also, since the vmalloc area is global, we don't * need to copy individual PTE's, it is enough to * copy the pgd pointer into the pte page of the diff --git a/arch/cris/mm/init.c b/arch/cris/mm/init.c index 0c833d176226..4207a2b52750 100644 --- a/arch/cris/mm/init.c +++ b/arch/cris/mm/init.c @@ -6,117 +6,6 @@ * * Authors: Bjorn Wesen (bjornw@axis.com) * - * $Log: init.c,v $ - * Revision 1.11 2004/05/28 09:28:56 starvik - * Calculation of loops_per_usec moved because initialization order has changed - * in Linux 2.6. - * - * Revision 1.10 2004/05/14 07:58:05 starvik - * Merge of changes from 2.4 - * - * Revision 1.9 2003/07/04 08:27:54 starvik - * Merge of Linux 2.5.74 - * - * Revision 1.8 2003/04/09 05:20:48 starvik - * Merge of Linux 2.5.67 - * - * Revision 1.7 2003/01/22 06:48:38 starvik - * Fixed warnings issued by GCC 3.2.1 - * - * Revision 1.6 2002/12/11 14:44:48 starvik - * Extracted v10 (ETRAX 100LX) specific stuff to arch/cris/arch-v10/mm - * - * Revision 1.5 2002/11/18 07:37:37 starvik - * Added cache bug workaround (from Linux 2.4) - * - * Revision 1.4 2002/11/13 15:40:24 starvik - * Removed the page table cache stuff (as done in other archs) - * - * Revision 1.3 2002/11/05 06:45:13 starvik - * Merge of Linux 2.5.45 - * - * Revision 1.2 2001/12/18 13:35:22 bjornw - * Applied the 2.4.13->2.4.16 CRIS patch to 2.5.1 (is a copy of 2.4.15). - * - * Revision 1.31 2001/11/13 16:22:00 bjornw - * Skip calculating totalram and sharedram in si_meminfo - * - * Revision 1.30 2001/11/12 19:02:10 pkj - * Fixed compiler warnings. - * - * Revision 1.29 2001/07/25 16:09:50 bjornw - * val->sharedram will stay 0 - * - * Revision 1.28 2001/06/28 16:30:17 bjornw - * Oops. This needs to wait until 2.4.6 is merged - * - * Revision 1.27 2001/06/28 14:04:07 bjornw - * Fill in sharedram - * - * Revision 1.26 2001/06/18 06:36:02 hp - * Enable free_initmem of __init-type pages - * - * Revision 1.25 2001/06/13 00:02:23 bjornw - * Use a separate variable to store the current pgd to avoid races in schedule - * - * Revision 1.24 2001/05/15 00:52:20 hp - * Only map segment 0xa as seg if CONFIG_JULIETTE - * - * Revision 1.23 2001/04/04 14:35:40 bjornw - * * Removed get_pte_slow and friends (2.4.3 change) - * * Removed bad_pmd handling (2.4.3 change) - * - * Revision 1.22 2001/04/04 13:38:04 matsfg - * Moved ioremap to a separate function instead - * - * Revision 1.21 2001/03/27 09:28:33 bjornw - * ioremap used too early - lets try it in mem_init instead - * - * Revision 1.20 2001/03/23 07:39:21 starvik - * Corrected according to review remarks - * - * Revision 1.19 2001/03/15 14:25:17 bjornw - * More general shadow registers and ioremaped addresses for external I/O - * - * Revision 1.18 2001/02/23 12:46:44 bjornw - * * 0xc was not CSE1; 0x8 is, same as uncached flash, so we move the uncached - * flash during CRIS_LOW_MAP from 0xe to 0x8 so both the flash and the I/O - * is mapped straight over (for !CRIS_LOW_MAP the uncached flash is still 0xe) - * - * Revision 1.17 2001/02/22 15:05:21 bjornw - * Map 0x9 straight over during LOW_MAP to allow for memory mapped LEDs - * - * Revision 1.16 2001/02/22 15:02:35 bjornw - * Map 0xc straight over during LOW_MAP to allow for memory mapped I/O - * - * Revision 1.15 2001/01/10 21:12:10 bjornw - * loops_per_sec -> loops_per_jiffy - * - * Revision 1.14 2000/11/22 16:23:20 bjornw - * Initialize totalhigh counters to 0 to make /proc/meminfo look nice. - * - * Revision 1.13 2000/11/21 16:37:51 bjornw - * Temporarily disable initmem freeing - * - * Revision 1.12 2000/11/21 13:55:07 bjornw - * Use CONFIG_CRIS_LOW_MAP for the low VM map instead of explicit CPU type - * - * Revision 1.11 2000/10/06 12:38:22 bjornw - * Cast empty_bad_page correctly (should really be of * type from the start.. - * - * Revision 1.10 2000/10/04 16:53:57 bjornw - * Fix memory-map due to LX features - * - * Revision 1.9 2000/09/13 15:47:49 bjornw - * Wrong count in reserved-pages loop - * - * Revision 1.8 2000/09/13 14:35:10 bjornw - * 2.4.0-test8 added a new arg to free_area_init_node - * - * Revision 1.7 2000/08/17 15:35:55 bjornw - * 2.4.0-test6 removed MAP_NR and inserted virt_to_page - * - * */ #include <linux/init.h> diff --git a/drivers/net/cris/eth_v10.c b/drivers/net/cris/eth_v10.c index 917b7b46f1a7..65d0a9103297 100644 --- a/drivers/net/cris/eth_v10.c +++ b/drivers/net/cris/eth_v10.c @@ -1,221 +1,10 @@ -/* $Id: ethernet.c,v 1.31 2004/10/18 14:49:03 starvik Exp $ - * +/* * e100net.c: A network driver for the ETRAX 100LX network controller. * * Copyright (c) 1998-2002 Axis Communications AB. * * The outline of this driver comes from skeleton.c. * - * $Log: ethernet.c,v $ - * Revision 1.31 2004/10/18 14:49:03 starvik - * Use RX interrupt as random source - * - * Revision 1.30 2004/09/29 10:44:04 starvik - * Enabed MAC-address output again - * - * Revision 1.29 2004/08/24 07:14:05 starvik - * Make use of generic MDIO interface and constants. - * - * Revision 1.28 2004/08/20 09:37:11 starvik - * Added support for Intel LXT972A. Creds to Randy Scarborough. - * - * Revision 1.27 2004/08/16 12:37:22 starvik - * Merge of Linux 2.6.8 - * - * Revision 1.25 2004/06/21 10:29:57 starvik - * Merge of Linux 2.6.7 - * - * Revision 1.23 2004/06/09 05:29:22 starvik - * Avoid any race where R_DMA_CH1_FIRST is NULL (may trigger cache bug). - * - * Revision 1.22 2004/05/14 07:58:03 starvik - * Merge of changes from 2.4 - * - * Revision 1.20 2004/03/11 11:38:40 starvik - * Merge of Linux 2.6.4 - * - * Revision 1.18 2003/12/03 13:45:46 starvik - * Use hardware pad for short packets to prevent information leakage. - * - * Revision 1.17 2003/07/04 08:27:37 starvik - * Merge of Linux 2.5.74 - * - * Revision 1.16 2003/04/24 08:28:22 starvik - * New LED behaviour: LED off when no link - * - * Revision 1.15 2003/04/09 05:20:47 starvik - * Merge of Linux 2.5.67 - * - * Revision 1.13 2003/03/06 16:11:01 henriken - * Off by one error in group address register setting. - * - * Revision 1.12 2003/02/27 17:24:19 starvik - * Corrected Rev to Revision - * - * Revision 1.11 2003/01/24 09:53:21 starvik - * Oops. Initialize GA to 0, not to 1 - * - * Revision 1.10 2003/01/24 09:50:55 starvik - * Initialize GA_0 and GA_1 to 0 to avoid matching of unwanted packets - * - * Revision 1.9 2002/12/13 07:40:58 starvik - * Added basic ethtool interface - * Handled out of memory when allocating new buffers - * - * Revision 1.8 2002/12/11 13:13:57 starvik - * Added arch/ to v10 specific includes - * Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer) - * - * Revision 1.7 2002/11/26 09:41:42 starvik - * Added e100_set_config (standard interface to set media type) - * Added protection against preemptive scheduling - * Added standard MII ioctls - * - * Revision 1.6 2002/11/21 07:18:18 starvik - * Timers must be initialized in 2.5.48 - * - * Revision 1.5 2002/11/20 11:56:11 starvik - * Merge of Linux 2.5.48 - * - * Revision 1.4 2002/11/18 07:26:46 starvik - * Linux 2.5 port of latest Linux 2.4 ethernet driver - * - * Revision 1.33 2002/10/02 20:16:17 hp - * SETF, SETS: Use underscored IO_x_ macros rather than incorrect token concatenation - * - * Revision 1.32 2002/09/16 06:05:58 starvik - * Align memory returned by dev_alloc_skb - * Moved handling of sent packets to interrupt to avoid reference counting problem - * - * Revision 1.31 2002/09/10 13:28:23 larsv - * Return -EINVAL for unknown ioctls to avoid confusing tools that tests - * for supported functionality by issuing special ioctls, i.e. wireless - * extensions. - * - * Revision 1.30 2002/05/07 18:50:08 johana - * Correct spelling in comments. - * - * Revision 1.29 2002/05/06 05:38:49 starvik - * Performance improvements: - * Large packets are not copied (breakpoint set to 256 bytes) - * The cache bug workaround is delayed until half of the receive list - * has been used - * Added transmit list - * Transmit interrupts are only enabled when transmit queue is full - * - * Revision 1.28.2.1 2002/04/30 08:15:51 starvik - * Performance improvements: - * Large packets are not copied (breakpoint set to 256 bytes) - * The cache bug workaround is delayed until half of the receive list - * has been used. - * Added transmit list - * Transmit interrupts are only enabled when transmit queue is full - * - * Revision 1.28 2002/04/22 11:47:21 johana - * Fix according to 2.4.19-pre7. time_after/time_before and - * missing end of comment. - * The patch has a typo for ethernet.c in e100_clear_network_leds(), - * that is fixed here. - * - * Revision 1.27 2002/04/12 11:55:11 bjornw - * Added TODO - * - * Revision 1.26 2002/03/15 17:11:02 bjornw - * Use prepare_rx_descriptor after the CPU has touched the receiving descs - * - * Revision 1.25 2002/03/08 13:07:53 bjornw - * Unnecessary spinlock removed - * - * Revision 1.24 2002/02/20 12:57:43 fredriks - * Replaced MIN() with min(). - * - * Revision 1.23 2002/02/20 10:58:14 fredriks - * Strip the Ethernet checksum (4 bytes) before forwarding a frame to upper layers. - * - * Revision 1.22 2002/01/30 07:48:22 matsfg - * Initiate R_NETWORK_TR_CTRL - * - * Revision 1.21 2001/11/23 11:54:49 starvik - * Added IFF_PROMISC and IFF_ALLMULTI handling in set_multicast_list - * Removed compiler warnings - * - * Revision 1.20 2001/11/12 19:26:00 pkj - * * Corrected e100_negotiate() to not assign half to current_duplex when - * it was supposed to compare them... - * * Cleaned up failure handling in e100_open(). - * * Fixed compiler warnings. - * - * Revision 1.19 2001/11/09 07:43:09 starvik - * Added full duplex support - * Added ioctl to set speed and duplex - * Clear LED timer only runs when LED is lit - * - * Revision 1.18 2001/10/03 14:40:43 jonashg - * Update rx_bytes counter. - * - * Revision 1.17 2001/06/11 12:43:46 olof - * Modified defines for network LED behavior - * - * Revision 1.16 2001/05/30 06:12:46 markusl - * TxDesc.next should not be set to NULL - * - * Revision 1.15 2001/05/29 10:27:04 markusl - * Updated after review remarks: - * +Use IO_EXTRACT - * +Handle underrun - * - * Revision 1.14 2001/05/29 09:20:14 jonashg - * Use driver name on printk output so one can tell which driver that complains. - * - * Revision 1.13 2001/05/09 12:35:59 johana - * Use DMA_NBR and IRQ_NBR defines from dma.h and irq.h - * - * Revision 1.12 2001/04/05 11:43:11 tobiasa - * Check dev before panic. - * - * Revision 1.11 2001/04/04 11:21:05 markusl - * Updated according to review remarks - * - * Revision 1.10 2001/03/26 16:03:06 bjornw - * Needs linux/config.h - * - * Revision 1.9 2001/03/19 14:47:48 pkj - * * Make sure there is always a pause after the network LEDs are - * changed so they will not look constantly lit during heavy traffic. - * * Always use HZ when setting times relative to jiffies. - * * Use LED_NETWORK_SET() when setting the network LEDs. - * - * Revision 1.8 2001/02/27 13:52:48 bjornw - * malloc.h -> slab.h - * - * Revision 1.7 2001/02/23 13:46:38 bjornw - * Spellling check - * - * Revision 1.6 2001/01/26 15:21:04 starvik - * Don't disable interrupts while reading MDIO registers (MDIO is slow) - * Corrected promiscuous mode - * Improved deallocation of IRQs ("ifconfig eth0 down" now works) - * - * Revision 1.5 2000/11/29 17:22:22 bjornw - * Get rid of the udword types legacy stuff - * - * Revision 1.4 2000/11/22 16:36:09 bjornw - * Please marketing by using the correct case when spelling Etrax. - * - * Revision 1.3 2000/11/21 16:43:04 bjornw - * Minor short->int change - * - * Revision 1.2 2000/11/08 14:27:57 bjornw - * 2.4 port - * - * Revision 1.1 2000/11/06 13:56:00 bjornw - * Verbatim copy of the 1.24 version of e100net.c from elinux - * - * Revision 1.24 2000/10/04 15:55:23 bjornw - * * Use virt_to_phys etc. for DMA addresses - * * Removed bogus CHECKSUM_UNNECESSARY - * - * */ @@ -244,7 +33,7 @@ #include <linux/ethtool.h> #include <asm/arch/svinto.h>/* DMA and register descriptions */ -#include <asm/io.h> /* LED_* I/O functions */ +#include <asm/io.h> /* CRIS_LED_* I/O functions */ #include <asm/irq.h> #include <asm/dma.h> #include <asm/system.h> @@ -1899,18 +1688,18 @@ e100_set_network_leds(int active) if (!current_speed) { /* Make LED red, link is down */ #if defined(CONFIG_ETRAX_NETWORK_RED_ON_NO_CONNECTION) - LED_NETWORK_SET(LED_RED); + CRIS_LED_NETWORK_SET(CRIS_LED_RED); #else - LED_NETWORK_SET(LED_OFF); + CRIS_LED_NETWORK_SET(CRIS_LED_OFF); #endif } else if (light_leds) { if (current_speed == 10) { - LED_NETWORK_SET(LED_ORANGE); + CRIS_LED_NETWORK_SET(CRIS_LED_ORANGE); } else { - LED_NETWORK_SET(LED_GREEN); + CRIS_LED_NETWORK_SET(CRIS_LED_GREEN); } } else { - LED_NETWORK_SET(LED_OFF); + CRIS_LED_NETWORK_SET(CRIS_LED_OFF); } } diff --git a/include/asm-cris/Kbuild b/include/asm-cris/Kbuild index 14498d5a2f65..17455459c43f 100644 --- a/include/asm-cris/Kbuild +++ b/include/asm-cris/Kbuild @@ -1,5 +1,11 @@ include include/asm-generic/Kbuild.asm -header-y += arch-v10/ arch-v32/ +header-$(CONFIG_ETRAX_ARCH_V10) += arch-v10/ +header-$(CONFIG_ETRAX_ARCH_V32) += arch-v32/ +header-y += ethernet.h +header-y += rtc.h +header-y += sync_serial.h + +unifdef-y += etraxgpio.h unifdef-y += rs485.h diff --git a/include/asm-cris/arch-v10/Kbuild b/include/asm-cris/arch-v10/Kbuild index d7f27dc0941a..60e7e1b73cec 100644 --- a/include/asm-cris/arch-v10/Kbuild +++ b/include/asm-cris/arch-v10/Kbuild @@ -1,2 +1,5 @@ header-y += ptrace.h header-y += user.h +header-y += svinto.h +header-y += sv_addr_ag.h +header-y += sv_addr.agh diff --git a/include/asm-cris/arch-v10/bug.h b/include/asm-cris/arch-v10/bug.h new file mode 100644 index 000000000000..3485d6b34bb0 --- /dev/null +++ b/include/asm-cris/arch-v10/bug.h @@ -0,0 +1,66 @@ +#ifndef __ASM_CRISv10_ARCH_BUG_H +#define __ASM_CRISv10_ARCH_BUG_H + +#include <linux/stringify.h> + +#ifdef CONFIG_BUG +#ifdef CONFIG_DEBUG_BUGVERBOSE +/* The BUG() macro is used for marking obviously incorrect code paths. + * It will cause a message with the file name and line number to be printed, + * and then cause an oops. The message is actually printed by handle_BUG() + * in arch/cris/kernel/traps.c, and the reason we use this method of storing + * the file name and line number is that we do not want to affect the registers + * by calling printk() before causing the oops. + */ + +#define BUG_PREFIX 0x0D7F +#define BUG_MAGIC 0x00001234 + +struct bug_frame { + unsigned short prefix; + unsigned int magic; + unsigned short clear; + unsigned short movu; + unsigned short line; + unsigned short jump; + unsigned char *filename; +}; + +#if 0 +/* Unfortunately this version of the macro does not work due to a problem + * with the compiler (aka a bug) when compiling with -O2, which sometimes + * erroneously causes the second input to be stored in a register... + */ +#define BUG() \ + __asm__ __volatile__ ("clear.d [" __stringify(BUG_MAGIC) "]\n\t"\ + "movu.w %0,$r0\n\t" \ + "jump %1\n\t" \ + : : "i" (__LINE__), "i" (__FILE__)) +#else +/* This version will have to do for now, until the compiler is fixed. + * The drawbacks of this version are that the file name will appear multiple + * times in the .rodata section, and that __LINE__ and __FILE__ can probably + * not be used like this with newer versions of gcc. + */ +#define BUG() \ + __asm__ __volatile__ ("clear.d [" __stringify(BUG_MAGIC) "]\n\t"\ + "movu.w " __stringify(__LINE__) ",$r0\n\t"\ + "jump 0f\n\t" \ + ".section .rodata\n" \ + "0:\t.string \"" __FILE__ "\"\n\t" \ + ".previous") +#endif + +#else + +/* This just causes an oops. */ +#define BUG() (*(int *)0 = 0) + +#endif + +#define HAVE_ARCH_BUG +#endif + +#include <asm-generic/bug.h> + +#endif diff --git a/include/asm-cris/arch-v10/io.h b/include/asm-cris/arch-v10/io.h index 11ef5b53d84e..c08c24265299 100644 --- a/include/asm-cris/arch-v10/io.h +++ b/include/asm-cris/arch-v10/io.h @@ -23,7 +23,7 @@ extern volatile unsigned long *port_cse1_addr; extern volatile unsigned long *port_csp0_addr; extern volatile unsigned long *port_csp4_addr; -/* macro for setting regs through a shadow - +/* macro for setting regs through a shadow - * r = register name (like R_PORT_PA_DATA) * s = shadow name (like port_pa_data_shadow) * b = bit number @@ -38,83 +38,89 @@ extern volatile unsigned long *port_csp4_addr; #undef CONFIG_ETRAX_PA_LEDS #undef CONFIG_ETRAX_PB_LEDS #undef CONFIG_ETRAX_CSP0_LEDS -#define LED_NETWORK_SET_G(x) -#define LED_NETWORK_SET_R(x) -#define LED_ACTIVE_SET_G(x) -#define LED_ACTIVE_SET_R(x) -#define LED_DISK_WRITE(x) -#define LED_DISK_READ(x) +#define CRIS_LED_NETWORK_SET_G(x) +#define CRIS_LED_NETWORK_SET_R(x) +#define CRIS_LED_ACTIVE_SET_G(x) +#define CRIS_LED_ACTIVE_SET_R(x) +#define CRIS_LED_DISK_WRITE(x) +#define CRIS_LED_DISK_READ(x) #endif #if !defined(CONFIG_ETRAX_CSP0_LEDS) -#define LED_BIT_SET(x) -#define LED_BIT_CLR(x) +#define CRIS_LED_BIT_SET(x) +#define CRIS_LED_BIT_CLR(x) #endif -#define LED_OFF 0x00 -#define LED_GREEN 0x01 -#define LED_RED 0x02 -#define LED_ORANGE (LED_GREEN | LED_RED) +#define CRIS_LED_OFF 0x00 +#define CRIS_LED_GREEN 0x01 +#define CRIS_LED_RED 0x02 +#define CRIS_LED_ORANGE (CRIS_LED_GREEN | CRIS_LED_RED) -#if CONFIG_ETRAX_LED1G == CONFIG_ETRAX_LED1R -#define LED_NETWORK_SET(x) \ +#if defined(CONFIG_ETRAX_NO_LEDS) +#define CRIS_LED_NETWORK_SET(x) +#else +#if CONFIG_ETRAX_LED1G == CONFIG_ETRAX_LED1R +#define CRIS_LED_NETWORK_SET(x) \ do { \ - LED_NETWORK_SET_G((x) & LED_GREEN); \ + CRIS_LED_NETWORK_SET_G((x) & CRIS_LED_GREEN); \ } while (0) #else -#define LED_NETWORK_SET(x) \ +#define CRIS_LED_NETWORK_SET(x) \ do { \ - LED_NETWORK_SET_G((x) & LED_GREEN); \ - LED_NETWORK_SET_R((x) & LED_RED); \ + CRIS_LED_NETWORK_SET_G((x) & CRIS_LED_GREEN); \ + CRIS_LED_NETWORK_SET_R((x) & CRIS_LED_RED); \ } while (0) #endif -#if CONFIG_ETRAX_LED2G == CONFIG_ETRAX_LED2R -#define LED_ACTIVE_SET(x) \ +#if CONFIG_ETRAX_LED2G == CONFIG_ETRAX_LED2R +#define CRIS_LED_ACTIVE_SET(x) \ do { \ - LED_ACTIVE_SET_G((x) & LED_GREEN); \ + CRIS_LED_ACTIVE_SET_G((x) & CRIS_LED_GREEN); \ } while (0) #else -#define LED_ACTIVE_SET(x) \ +#define CRIS_LED_ACTIVE_SET(x) \ do { \ - LED_ACTIVE_SET_G((x) & LED_GREEN); \ - LED_ACTIVE_SET_R((x) & LED_RED); \ + CRIS_LED_ACTIVE_SET_G((x) & CRIS_LED_GREEN); \ + CRIS_LED_ACTIVE_SET_R((x) & CRIS_LED_RED); \ } while (0) #endif +#endif #ifdef CONFIG_ETRAX_PA_LEDS -#define LED_NETWORK_SET_G(x) \ +#define CRIS_LED_NETWORK_SET_G(x) \ REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, CONFIG_ETRAX_LED1G, !(x)) -#define LED_NETWORK_SET_R(x) \ +#define CRIS_LED_NETWORK_SET_R(x) \ REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, CONFIG_ETRAX_LED1R, !(x)) -#define LED_ACTIVE_SET_G(x) \ +#define CRIS_LED_ACTIVE_SET_G(x) \ REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, CONFIG_ETRAX_LED2G, !(x)) -#define LED_ACTIVE_SET_R(x) \ +#define CRIS_LED_ACTIVE_SET_R(x) \ REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, CONFIG_ETRAX_LED2R, !(x)) -#define LED_DISK_WRITE(x) \ +#define CRIS_LED_DISK_WRITE(x) \ do{\ REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, CONFIG_ETRAX_LED3G, !(x));\ REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, CONFIG_ETRAX_LED3R, !(x));\ }while(0) -#define LED_DISK_READ(x) \ - REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, CONFIG_ETRAX_LED3G, !(x)) +#define CRIS_LED_DISK_READ(x) \ + REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, \ + CONFIG_ETRAX_LED3G, !(x)) #endif #ifdef CONFIG_ETRAX_PB_LEDS -#define LED_NETWORK_SET_G(x) \ +#define CRIS_LED_NETWORK_SET_G(x) \ REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_LED1G, !(x)) -#define LED_NETWORK_SET_R(x) \ +#define CRIS_LED_NETWORK_SET_R(x) \ REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_LED1R, !(x)) -#define LED_ACTIVE_SET_G(x) \ +#define CRIS_LED_ACTIVE_SET_G(x) \ REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_LED2G, !(x)) -#define LED_ACTIVE_SET_R(x) \ +#define CRIS_LED_ACTIVE_SET_R(x) \ REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_LED2R, !(x)) -#define LED_DISK_WRITE(x) \ +#define CRIS_LED_DISK_WRITE(x) \ do{\ REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_LED3G, !(x));\ REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_LED3R, !(x));\ }while(0) -#define LED_DISK_READ(x) \ - REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_LED3G, !(x)) +#define CRIS_LED_DISK_READ(x) \ + REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, \ + CONFIG_ETRAX_LED3G, !(x)) #endif #ifdef CONFIG_ETRAX_CSP0_LEDS @@ -130,27 +136,27 @@ extern volatile unsigned long *port_csp4_addr; (1 << CONFIG_ETRAX_LED10Y ) |(1 << CONFIG_ETRAX_LED11Y )|\ (1 << CONFIG_ETRAX_LED12R )) -#define LED_NETWORK_SET_G(x) \ +#define CRIS_LED_NETWORK_SET_G(x) \ REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED1G, !(x)) -#define LED_NETWORK_SET_R(x) \ +#define CRIS_LED_NETWORK_SET_R(x) \ REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED1R, !(x)) -#define LED_ACTIVE_SET_G(x) \ +#define CRIS_LED_ACTIVE_SET_G(x) \ REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED2G, !(x)) -#define LED_ACTIVE_SET_R(x) \ +#define CRIS_LED_ACTIVE_SET_R(x) \ REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED2R, !(x)) -#define LED_DISK_WRITE(x) \ +#define CRIS_LED_DISK_WRITE(x) \ do{\ REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED3G, !(x));\ REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED3R, !(x));\ }while(0) -#define LED_DISK_READ(x) \ +#define CRIS_LED_DISK_READ(x) \ REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED3G, !(x)) -#define LED_BIT_SET(x)\ +#define CRIS_LED_BIT_SET(x)\ do{\ if((( 1 << x) & CONFIGURABLE_LEDS) != 0)\ REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, x, 1);\ }while(0) -#define LED_BIT_CLR(x)\ +#define CRIS_LED_BIT_CLR(x)\ do{\ if((( 1 << x) & CONFIGURABLE_LEDS) != 0)\ REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, x, 0);\ diff --git a/include/asm-cris/arch-v10/page.h b/include/asm-cris/arch-v10/page.h index 7d8307aed7f3..ffafc99c3472 100644 --- a/include/asm-cris/arch-v10/page.h +++ b/include/asm-cris/arch-v10/page.h @@ -12,8 +12,8 @@ #endif /* macros to convert between really physical and virtual addresses - * by stripping a selected bit, we can convert between KSEG_x and 0x40000000 where - * the DRAM really resides + * by stripping a selected bit, we can convert between KSEG_x and + * 0x40000000 where the DRAM really resides */ #ifdef CONFIG_CRIS_LOW_MAP diff --git a/include/asm-cris/arch-v32/Kbuild b/include/asm-cris/arch-v32/Kbuild index d7f27dc0941a..a0ec545e242e 100644 --- a/include/asm-cris/arch-v32/Kbuild +++ b/include/asm-cris/arch-v32/Kbuild @@ -1,2 +1,3 @@ header-y += ptrace.h header-y += user.h +header-y += cryptocop.h diff --git a/include/asm-cris/arch-v32/atomic.h b/include/asm-cris/arch-v32/atomic.h index bbfb7a5ae315..852ceff8013f 100644 --- a/include/asm-cris/arch-v32/atomic.h +++ b/include/asm-cris/arch-v32/atomic.h @@ -1,7 +1,7 @@ #ifndef __ASM_CRIS_ARCH_ATOMIC__ #define __ASM_CRIS_ARCH_ATOMIC__ -#include <asm/system.h> +#include <linux/spinlock_types.h> extern void cris_spin_unlock(void *l, int val); extern void cris_spin_lock(void *l); @@ -18,15 +18,15 @@ extern spinlock_t cris_atomic_locks[]; #define cris_atomic_save(addr, flags) \ local_irq_save(flags); \ - cris_spin_lock((void*)&cris_atomic_locks[HASH_ADDR(addr)].lock); + cris_spin_lock((void *)&cris_atomic_locks[HASH_ADDR(addr)].raw_lock.slock); #define cris_atomic_restore(addr, flags) \ { \ spinlock_t *lock = (void*)&cris_atomic_locks[HASH_ADDR(addr)]; \ __asm__ volatile ("move.d %1,%0" \ - : "=m" (lock->lock) \ - : "r" (1) \ - : "memory"); \ + : "=m" (lock->raw_lock.slock) \ + : "r" (1) \ + : "memory"); \ local_irq_restore(flags); \ } diff --git a/include/asm-cris/arch-v32/bug.h b/include/asm-cris/arch-v32/bug.h new file mode 100644 index 000000000000..0f211e135248 --- /dev/null +++ b/include/asm-cris/arch-v32/bug.h @@ -0,0 +1,33 @@ +#ifndef __ASM_CRISv32_ARCH_BUG_H +#define __ASM_CRISv32_ARCH_BUG_H + +#include <linux/stringify.h> + +#ifdef CONFIG_BUG +#ifdef CONFIG_DEBUG_BUGVERBOSE +/* + * The penalty for the in-band code path will be the size of break 14. + * All other stuff is done out-of-band with exception handlers. + */ +#define BUG() \ + __asm__ __volatile__ ("0: break 14\n\t" \ + ".section .fixup,\"ax\"\n" \ + "1:\n\t" \ + "move.d %0, $r10\n\t" \ + "move.d %1, $r11\n\t" \ + "jump do_BUG\n\t" \ + "nop\n\t" \ + ".previous\n\t" \ + ".section __ex_table,\"a\"\n\t" \ + ".dword 0b, 1b\n\t" \ + ".previous\n\t" \ + : : "ri" (__FILE__), "i" (__LINE__)) +#else +#define BUG() __asm__ __volatile__ ("break 14\n\t") +#endif + +#define HAVE_ARCH_BUG +#endif + +#include <asm-generic/bug.h> +#endif diff --git a/include/asm-cris/arch-v32/cache.h b/include/asm-cris/arch-v32/cache.h index 80b236b15319..b3d752dfe15b 100644 --- a/include/asm-cris/arch-v32/cache.h +++ b/include/asm-cris/arch-v32/cache.h @@ -1,8 +1,19 @@ #ifndef _ASM_CRIS_ARCH_CACHE_H #define _ASM_CRIS_ARCH_CACHE_H +#include <asm/arch/hwregs/dma.h> + /* A cache-line is 32 bytes. */ #define L1_CACHE_BYTES 32 #define L1_CACHE_SHIFT 5 +void flush_dma_list(dma_descr_data *descr); +void flush_dma_descr(dma_descr_data *descr, int flush_buf); + +#define flush_dma_context(c) \ + flush_dma_list(phys_to_virt((c)->saved_data)); + +void cris_flush_cache_range(void *buf, unsigned long len); +void cris_flush_cache(void); + #endif /* _ASM_CRIS_ARCH_CACHE_H */ diff --git a/include/asm-cris/arch-v32/delay.h b/include/asm-cris/arch-v32/delay.h index b6e941e637de..e9fda03810a9 100644 --- a/include/asm-cris/arch-v32/delay.h +++ b/include/asm-cris/arch-v32/delay.h @@ -1,6 +1,16 @@ #ifndef _ASM_CRIS_ARCH_DELAY_H #define _ASM_CRIS_ARCH_DELAY_H +extern void cris_delay10ns(u32 n10ns); +#define udelay(u) cris_delay10ns((u)*100) +#define ndelay(n) cris_delay10ns(((n)+9)/10) + +/* + * Not used anymore for udelay or ndelay. Referenced by + * e.g. init/calibrate.c. All other references are likely bugs; + * should be replaced by mdelay, udelay or ndelay. + */ + static inline void __delay(int loops) { diff --git a/include/asm-cris/arch-v32/hwregs/Makefile b/include/asm-cris/arch-v32/hwregs/Makefile index c9160f9949a9..f9a05d2aa061 100644 --- a/include/asm-cris/arch-v32/hwregs/Makefile +++ b/include/asm-cris/arch-v32/hwregs/Makefile @@ -1,4 +1,3 @@ -# $Id: Makefile,v 1.8 2004/01/07 21:16:18 johana Exp $ # Makefile to generate or copy the latest register definitions # and related datastructures and helpermacros. # The offical place for these files is at: diff --git a/include/asm-cris/arch-v32/hwregs/dma.h b/include/asm-cris/arch-v32/hwregs/dma.h index c31832d3d6be..3ce322b5c731 100644 --- a/include/asm-cris/arch-v32/hwregs/dma.h +++ b/include/asm-cris/arch-v32/hwregs/dma.h @@ -1,5 +1,4 @@ -/* $Id: dma.h,v 1.7 2005/04/24 18:30:58 starvik Exp $ - * +/* * DMA C definitions and help macros * */ @@ -98,11 +97,11 @@ typedef struct dma_descr_data { // give stream command #define DMA_WR_CMD( inst, cmd_par ) \ - do { reg_dma_rw_stream_cmd r = {0}; \ - do { r = REG_RD( dma, inst, rw_stream_cmd ); } while( r.busy ); \ - r.cmd = (cmd_par); \ - REG_WR( dma, inst, rw_stream_cmd, r ); \ - } while( 0 ) + do { reg_dma_rw_stream_cmd __x = {0}; \ + do { __x = REG_RD(dma, inst, rw_stream_cmd); } while (__x.busy); \ + __x.cmd = (cmd_par); \ + REG_WR(dma, inst, rw_stream_cmd, __x); \ + } while (0) // load: g,c,d:burst #define DMA_START_GROUP( inst, group_descr ) \ diff --git a/include/asm-cris/arch-v32/hwregs/eth_defs.h b/include/asm-cris/arch-v32/hwregs/eth_defs.h index 1196d7cc783f..90fe8a28894f 100644 --- a/include/asm-cris/arch-v32/hwregs/eth_defs.h +++ b/include/asm-cris/arch-v32/hwregs/eth_defs.h @@ -3,12 +3,12 @@ /* * This file is autogenerated from - * file: ../../inst/eth/rtl/eth_regs.r - * id: eth_regs.r,v 1.11 2005/02/09 10:48:38 kriskn Exp - * last modfied: Mon Apr 11 16:07:03 2005 + * file: eth.r + * id: eth_regs.r,v 1.16 2005/05/20 15:41:22 perz Exp + * last modfied: Mon Jan 9 06:06:41 2006 * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile eth_defs.h ../../inst/eth/rtl/eth_regs.r - * id: $Id: eth_defs.h,v 1.6 2005/04/24 18:30:58 starvik Exp $ + * by /n/asic/design/tools/rdesc/rdes2c eth.r + * id: $Id: eth_defs.h,v 1.7 2006/01/26 13:45:30 karljope Exp $ * Any changes here will be lost. * * -*- buffer-read-only: t -*- @@ -116,26 +116,28 @@ typedef struct { /* Register rw_ga_lo, scope eth, type rw */ typedef struct { - unsigned int table : 32; + unsigned int tbl : 32; } reg_eth_rw_ga_lo; #define REG_RD_ADDR_eth_rw_ga_lo 16 #define REG_WR_ADDR_eth_rw_ga_lo 16 /* Register rw_ga_hi, scope eth, type rw */ typedef struct { - unsigned int table : 32; + unsigned int tbl : 32; } reg_eth_rw_ga_hi; #define REG_RD_ADDR_eth_rw_ga_hi 20 #define REG_WR_ADDR_eth_rw_ga_hi 20 /* Register rw_gen_ctrl, scope eth, type rw */ typedef struct { - unsigned int en : 1; - unsigned int phy : 2; - unsigned int protocol : 1; - unsigned int loopback : 1; - unsigned int flow_ctrl_dis : 1; - unsigned int dummy1 : 26; + unsigned int en : 1; + unsigned int phy : 2; + unsigned int protocol : 1; + unsigned int loopback : 1; + unsigned int flow_ctrl : 1; + unsigned int gtxclk_out : 1; + unsigned int phyrst_n : 1; + unsigned int dummy1 : 24; } reg_eth_rw_gen_ctrl; #define REG_RD_ADDR_eth_rw_gen_ctrl 24 #define REG_WR_ADDR_eth_rw_gen_ctrl 24 @@ -150,22 +152,23 @@ typedef struct { unsigned int oversize : 1; unsigned int bad_crc : 1; unsigned int duplex : 1; - unsigned int max_size : 1; - unsigned int dummy1 : 23; + unsigned int max_size : 16; + unsigned int dummy1 : 8; } reg_eth_rw_rec_ctrl; #define REG_RD_ADDR_eth_rw_rec_ctrl 28 #define REG_WR_ADDR_eth_rw_rec_ctrl 28 /* Register rw_tr_ctrl, scope eth, type rw */ typedef struct { - unsigned int crc : 1; - unsigned int pad : 1; - unsigned int retry : 1; - unsigned int ignore_col : 1; - unsigned int cancel : 1; - unsigned int hsh_delay : 1; - unsigned int ignore_crs : 1; - unsigned int dummy1 : 25; + unsigned int crc : 1; + unsigned int pad : 1; + unsigned int retry : 1; + unsigned int ignore_col : 1; + unsigned int cancel : 1; + unsigned int hsh_delay : 1; + unsigned int ignore_crs : 1; + unsigned int carrier_ext : 1; + unsigned int dummy1 : 24; } reg_eth_rw_tr_ctrl; #define REG_RD_ADDR_eth_rw_tr_ctrl 32 #define REG_WR_ADDR_eth_rw_tr_ctrl 32 @@ -180,13 +183,10 @@ typedef struct { /* Register rw_mgm_ctrl, scope eth, type rw */ typedef struct { - unsigned int mdio : 1; - unsigned int mdoe : 1; - unsigned int mdc : 1; - unsigned int phyclk : 1; - unsigned int txdata : 4; - unsigned int txen : 1; - unsigned int dummy1 : 23; + unsigned int mdio : 1; + unsigned int mdoe : 1; + unsigned int mdc : 1; + unsigned int dummy1 : 29; } reg_eth_rw_mgm_ctrl; #define REG_RD_ADDR_eth_rw_mgm_ctrl 40 #define REG_WR_ADDR_eth_rw_mgm_ctrl 40 @@ -196,17 +196,8 @@ typedef struct { unsigned int mdio : 1; unsigned int exc_col : 1; unsigned int urun : 1; - unsigned int phyclk : 1; - unsigned int txdata : 4; - unsigned int txen : 1; - unsigned int col : 1; - unsigned int crs : 1; - unsigned int txclk : 1; - unsigned int rxdata : 4; - unsigned int rxer : 1; - unsigned int rxdv : 1; - unsigned int rxclk : 1; - unsigned int dummy1 : 13; + unsigned int clk_125 : 1; + unsigned int dummy1 : 28; } reg_eth_r_stat; #define REG_RD_ADDR_eth_r_stat 44 @@ -274,83 +265,83 @@ typedef struct { /* Register rw_intr_mask, scope eth, type rw */ typedef struct { - unsigned int crc : 1; - unsigned int align : 1; - unsigned int oversize : 1; - unsigned int congestion : 1; - unsigned int single_col : 1; - unsigned int mult_col : 1; - unsigned int late_col : 1; - unsigned int deferred : 1; - unsigned int carrier_loss : 1; - unsigned int sqe_test_err : 1; - unsigned int orun : 1; - unsigned int urun : 1; - unsigned int excessive_col : 1; - unsigned int mdio : 1; - unsigned int dummy1 : 18; + unsigned int crc : 1; + unsigned int align : 1; + unsigned int oversize : 1; + unsigned int congestion : 1; + unsigned int single_col : 1; + unsigned int mult_col : 1; + unsigned int late_col : 1; + unsigned int deferred : 1; + unsigned int carrier_loss : 1; + unsigned int sqe_test_err : 1; + unsigned int orun : 1; + unsigned int urun : 1; + unsigned int exc_col : 1; + unsigned int mdio : 1; + unsigned int dummy1 : 18; } reg_eth_rw_intr_mask; #define REG_RD_ADDR_eth_rw_intr_mask 76 #define REG_WR_ADDR_eth_rw_intr_mask 76 /* Register rw_ack_intr, scope eth, type rw */ typedef struct { - unsigned int crc : 1; - unsigned int align : 1; - unsigned int oversize : 1; - unsigned int congestion : 1; - unsigned int single_col : 1; - unsigned int mult_col : 1; - unsigned int late_col : 1; - unsigned int deferred : 1; - unsigned int carrier_loss : 1; - unsigned int sqe_test_err : 1; - unsigned int orun : 1; - unsigned int urun : 1; - unsigned int excessive_col : 1; - unsigned int mdio : 1; - unsigned int dummy1 : 18; + unsigned int crc : 1; + unsigned int align : 1; + unsigned int oversize : 1; + unsigned int congestion : 1; + unsigned int single_col : 1; + unsigned int mult_col : 1; + unsigned int late_col : 1; + unsigned int deferred : 1; + unsigned int carrier_loss : 1; + unsigned int sqe_test_err : 1; + unsigned int orun : 1; + unsigned int urun : 1; + unsigned int exc_col : 1; + unsigned int mdio : 1; + unsigned int dummy1 : 18; } reg_eth_rw_ack_intr; #define REG_RD_ADDR_eth_rw_ack_intr 80 #define REG_WR_ADDR_eth_rw_ack_intr 80 /* Register r_intr, scope eth, type r */ typedef struct { - unsigned int crc : 1; - unsigned int align : 1; - unsigned int oversize : 1; - unsigned int congestion : 1; - unsigned int single_col : 1; - unsigned int mult_col : 1; - unsigned int late_col : 1; - unsigned int deferred : 1; - unsigned int carrier_loss : 1; - unsigned int sqe_test_err : 1; - unsigned int orun : 1; - unsigned int urun : 1; - unsigned int excessive_col : 1; - unsigned int mdio : 1; - unsigned int dummy1 : 18; + unsigned int crc : 1; + unsigned int align : 1; + unsigned int oversize : 1; + unsigned int congestion : 1; + unsigned int single_col : 1; + unsigned int mult_col : 1; + unsigned int late_col : 1; + unsigned int deferred : 1; + unsigned int carrier_loss : 1; + unsigned int sqe_test_err : 1; + unsigned int orun : 1; + unsigned int urun : 1; + unsigned int exc_col : 1; + unsigned int mdio : 1; + unsigned int dummy1 : 18; } reg_eth_r_intr; #define REG_RD_ADDR_eth_r_intr 84 /* Register r_masked_intr, scope eth, type r */ typedef struct { - unsigned int crc : 1; - unsigned int align : 1; - unsigned int oversize : 1; - unsigned int congestion : 1; - unsigned int single_col : 1; - unsigned int mult_col : 1; - unsigned int late_col : 1; - unsigned int deferred : 1; - unsigned int carrier_loss : 1; - unsigned int sqe_test_err : 1; - unsigned int orun : 1; - unsigned int urun : 1; - unsigned int excessive_col : 1; - unsigned int mdio : 1; - unsigned int dummy1 : 18; + unsigned int crc : 1; + unsigned int align : 1; + unsigned int oversize : 1; + unsigned int congestion : 1; + unsigned int single_col : 1; + unsigned int mult_col : 1; + unsigned int late_col : 1; + unsigned int deferred : 1; + unsigned int carrier_loss : 1; + unsigned int sqe_test_err : 1; + unsigned int orun : 1; + unsigned int urun : 1; + unsigned int exc_col : 1; + unsigned int mdio : 1; + unsigned int dummy1 : 18; } reg_eth_r_masked_intr; #define REG_RD_ADDR_eth_r_masked_intr 88 @@ -360,12 +351,15 @@ enum { regk_eth_discard = 0x00000000, regk_eth_ether = 0x00000000, regk_eth_full = 0x00000001, + regk_eth_gmii = 0x00000003, + regk_eth_gtxclk = 0x00000001, regk_eth_half = 0x00000000, regk_eth_hsh = 0x00000001, regk_eth_mii = 0x00000001, + regk_eth_mii_arec = 0x00000002, regk_eth_mii_clk = 0x00000000, - regk_eth_mii_rec = 0x00000002, regk_eth_no = 0x00000000, + regk_eth_phyrst = 0x00000000, regk_eth_rec = 0x00000001, regk_eth_rw_ga_hi_default = 0x00000000, regk_eth_rw_ga_lo_default = 0x00000000, @@ -377,8 +371,8 @@ enum { regk_eth_rw_ma1_lo_default = 0x00000000, regk_eth_rw_mgm_ctrl_default = 0x00000000, regk_eth_rw_test_ctrl_default = 0x00000000, - regk_eth_size1518 = 0x00000000, - regk_eth_size1522 = 0x00000001, + regk_eth_size1518 = 0x000005ee, + regk_eth_size1522 = 0x000005f2, regk_eth_yes = 0x00000001 }; #endif /* __eth_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/reg_rdwr.h b/include/asm-cris/arch-v32/hwregs/reg_rdwr.h index 44e60233c68f..236f91efe7e8 100644 --- a/include/asm-cris/arch-v32/hwregs/reg_rdwr.h +++ b/include/asm-cris/arch-v32/hwregs/reg_rdwr.h @@ -1,15 +1,17 @@ -/* $Id: reg_rdwr.h,v 1.6 2005/04/24 18:30:58 starvik Exp $ - * +/* * Read/write register macros used by *_defs.h */ #ifndef reg_rdwr_h #define reg_rdwr_h +#ifndef REG_READ +#define REG_READ(type, addr) (*((volatile type *) (addr))) +#endif -#define REG_READ(type, addr) *((volatile type *) (addr)) - +#ifndef REG_WRITE #define REG_WRITE(type, addr, val) \ do { *((volatile type *) (addr)) = (val); } while(0) +#endif #endif diff --git a/include/asm-cris/arch-v32/io.h b/include/asm-cris/arch-v32/io.h index 5efe4d949001..6b38912f29ba 100644 --- a/include/asm-cris/arch-v32/io.h +++ b/include/asm-cris/arch-v32/io.h @@ -1,9 +1,10 @@ #ifndef _ASM_ARCH_CRIS_IO_H #define _ASM_ARCH_CRIS_IO_H -#include <asm/arch/hwregs/reg_map.h> -#include <asm/arch/hwregs/reg_rdwr.h> -#include <asm/arch/hwregs/gio_defs.h> +#include <linux/spinlock.h> +#include <hwregs/reg_map.h> +#include <hwregs/reg_rdwr.h> +#include <hwregs/gio_defs.h> enum crisv32_io_dir { @@ -13,10 +14,11 @@ enum crisv32_io_dir struct crisv32_ioport { - unsigned long* oe; - unsigned long* data; - unsigned long* data_in; + volatile unsigned long *oe; + volatile unsigned long *data; + volatile unsigned long *data_in; unsigned int pin_count; + spinlock_t lock; }; struct crisv32_iopin @@ -34,22 +36,36 @@ extern struct crisv32_iopin crisv32_led2_red; extern struct crisv32_iopin crisv32_led3_green; extern struct crisv32_iopin crisv32_led3_red; -static inline void crisv32_io_set(struct crisv32_iopin* iopin, - int val) +extern struct crisv32_iopin crisv32_led_net0_green; +extern struct crisv32_iopin crisv32_led_net0_red; +extern struct crisv32_iopin crisv32_led_net1_green; +extern struct crisv32_iopin crisv32_led_net1_red; + +static inline void crisv32_io_set(struct crisv32_iopin *iopin, int val) { + long flags; + spin_lock_irqsave(&iopin->port->lock, flags); + if (val) *iopin->port->data |= iopin->bit; else *iopin->port->data &= ~iopin->bit; + + spin_unlock_irqrestore(&iopin->port->lock, flags); } static inline void crisv32_io_set_dir(struct crisv32_iopin* iopin, enum crisv32_io_dir dir) { + long flags; + spin_lock_irqsave(&iopin->port->lock, flags); + if (dir == crisv32_io_dir_in) *iopin->port->oe &= ~iopin->bit; else *iopin->port->oe |= iopin->bit; + + spin_unlock_irqrestore(&iopin->port->lock, flags); } static inline int crisv32_io_rd(struct crisv32_iopin* iopin) @@ -60,38 +76,61 @@ static inline int crisv32_io_rd(struct crisv32_iopin* iopin) int crisv32_io_get(struct crisv32_iopin* iopin, unsigned int port, unsigned int pin); int crisv32_io_get_name(struct crisv32_iopin* iopin, - char* name); + const char *name); -#define LED_OFF 0x00 -#define LED_GREEN 0x01 -#define LED_RED 0x02 -#define LED_ORANGE (LED_GREEN | LED_RED) +#define CRIS_LED_OFF 0x00 +#define CRIS_LED_GREEN 0x01 +#define CRIS_LED_RED 0x02 +#define CRIS_LED_ORANGE (CRIS_LED_GREEN | CRIS_LED_RED) -#define LED_NETWORK_SET(x) \ - do { \ - LED_NETWORK_SET_G((x) & LED_GREEN); \ - LED_NETWORK_SET_R((x) & LED_RED); \ +#if (defined(CONFIG_ETRAX_NBR_LED_GRP_ONE) || defined(CONFIG_ETRAX_NBR_LED_GRP_TWO)) +#define CRIS_LED_NETWORK_GRP0_SET(x) \ + do { \ + CRIS_LED_NETWORK_GRP0_SET_G((x) & CRIS_LED_GREEN); \ + CRIS_LED_NETWORK_GRP0_SET_R((x) & CRIS_LED_RED); \ } while (0) -#define LED_ACTIVE_SET(x) \ +#else +#define CRIS_LED_NETWORK_GRP0_SET(x) while (0) {} +#endif + +#define CRIS_LED_NETWORK_GRP0_SET_G(x) \ + crisv32_io_set(&crisv32_led_net0_green, !(x)); + +#define CRIS_LED_NETWORK_GRP0_SET_R(x) \ + crisv32_io_set(&crisv32_led_net0_red, !(x)); + +#if defined(CONFIG_ETRAX_NBR_LED_GRP_TWO) +#define CRIS_LED_NETWORK_GRP1_SET(x) \ + do { \ + CRIS_LED_NETWORK_GRP1_SET_G((x) & CRIS_LED_GREEN); \ + CRIS_LED_NETWORK_GRP1_SET_R((x) & CRIS_LED_RED); \ + } while (0) +#else +#define CRIS_LED_NETWORK_GRP1_SET(x) while (0) {} +#endif + +#define CRIS_LED_NETWORK_GRP1_SET_G(x) \ + crisv32_io_set(&crisv32_led_net1_green, !(x)); + +#define CRIS_LED_NETWORK_GRP1_SET_R(x) \ + crisv32_io_set(&crisv32_led_net1_red, !(x)); + +#define CRIS_LED_ACTIVE_SET(x) \ do { \ - LED_ACTIVE_SET_G((x) & LED_GREEN); \ - LED_ACTIVE_SET_R((x) & LED_RED); \ + CRIS_LED_ACTIVE_SET_G((x) & CRIS_LED_GREEN); \ + CRIS_LED_ACTIVE_SET_R((x) & CRIS_LED_RED); \ } while (0) -#define LED_NETWORK_SET_G(x) \ - crisv32_io_set(&crisv32_led1_green, !(x)); -#define LED_NETWORK_SET_R(x) \ - crisv32_io_set(&crisv32_led1_red, !(x)); -#define LED_ACTIVE_SET_G(x) \ +#define CRIS_LED_ACTIVE_SET_G(x) \ crisv32_io_set(&crisv32_led2_green, !(x)); -#define LED_ACTIVE_SET_R(x) \ +#define CRIS_LED_ACTIVE_SET_R(x) \ crisv32_io_set(&crisv32_led2_red, !(x)); -#define LED_DISK_WRITE(x) \ +#define CRIS_LED_DISK_WRITE(x) \ do{\ crisv32_io_set(&crisv32_led3_green, !(x)); \ crisv32_io_set(&crisv32_led3_red, !(x)); \ }while(0) -#define LED_DISK_READ(x) \ +#define CRIS_LED_DISK_READ(x) \ crisv32_io_set(&crisv32_led3_green, !(x)); #endif diff --git a/include/asm-cris/arch-v32/irq.h b/include/asm-cris/arch-v32/irq.h index bac94ee6bc90..9e4c9fbdfddf 100644 --- a/include/asm-cris/arch-v32/irq.h +++ b/include/asm-cris/arch-v32/irq.h @@ -1,12 +1,17 @@ #ifndef _ASM_ARCH_IRQ_H #define _ASM_ARCH_IRQ_H -#include "hwregs/intr_vect.h" +#include <hwregs/intr_vect.h> /* Number of non-cpu interrupts. */ -#define NR_IRQS 0x50 /* Exceptions + IRQs */ -#define NR_REAL_IRQS 0x20 /* IRQs */ +#define NR_IRQS NBR_INTR_VECT /* Exceptions + IRQs */ #define FIRST_IRQ 0x31 /* Exception number for first IRQ */ +#define NR_REAL_IRQS (NBR_INTR_VECT - FIRST_IRQ) /* IRQs */ +#if NR_REAL_IRQS > 32 +#define MACH_IRQS 64 +#else +#define MACH_IRQS 32 +#endif #ifndef __ASSEMBLY__ /* Global IRQ vector. */ @@ -73,7 +78,7 @@ void set_exception_vector(int n, irqvectptr addr); * which will acknowledge the interrupt, is run. The actual blocking is made * by crisv32_do_IRQ. */ -#define BUILD_IRQ(nr, mask) \ +#define BUILD_IRQ(nr) \ void IRQ_NAME(nr); \ __asm__ ( \ ".text\n\t" \ @@ -81,7 +86,7 @@ __asm__ ( \ SAVE_ALL \ KGDB_FIXUP \ "move.d "#nr",$r10\n\t" \ - "move.d $sp,$r12\n\t" \ + "move.d $sp, $r12\n\t" \ "jsr crisv32_do_IRQ\n\t" \ "moveq 1, $r11\n\t" \ "jump ret_from_intr\n\t" \ diff --git a/include/asm-cris/arch-v32/juliette.h b/include/asm-cris/arch-v32/juliette.h deleted file mode 100644 index f1f81725e57b..000000000000 --- a/include/asm-cris/arch-v32/juliette.h +++ /dev/null @@ -1,326 +0,0 @@ -#ifndef _ASM_JULIETTE_H -#define _ASM_JULIETTE_H - -/* juliette _IOC_TYPE, bits 8 to 15 in ioctl cmd */ - -#define JULIOCTYPE 42 - -/* supported ioctl _IOC_NR's */ - -#define JULSTARTDMA 0x1 /* start a picture asynchronously */ - -/* set parameters */ - -#define SETDEFAULT 0x2 /* CCD/VIDEO/SS1M */ -#define SETPARAMETERS 0x3 /* CCD/VIDEO */ -#define SETSIZE 0x4 /* CCD/VIDEO/SS1M */ -#define SETCOMPRESSION 0x5 /* CCD/VIDEO/SS1M */ -#define SETCOLORLEVEL 0x6 /* CCD/VIDEO */ -#define SETBRIGHTNESS 0x7 /* CCD */ -#define SETROTATION 0x8 /* CCD */ -#define SETTEXT 0x9 /* CCD/VIDEO/SS1M */ -#define SETCLOCK 0xa /* CCD/VIDEO/SS1M */ -#define SETDATE 0xb /* CCD/VIDEO/SS1M */ -#define SETTIMEFORMAT 0xc /* CCD/VIDEO/SS1M */ -#define SETDATEFORMAT 0xd /* VIDEO */ -#define SETTEXTALIGNMENT 0xe /* VIDEO */ -#define SETFPS 0xf /* CCD/VIDEO/SS1M */ -#define SETVGA 0xff /* VIDEO */ -#define SETCOMMENT 0xfe /* CCD/VIDEO */ - -/* get parameters */ - -#define GETDRIVERTYPE 0x10 /* CCD/VIDEO/SS1M */ -#define GETNBROFCAMERAS 0x11 /* CCD/VIDEO/SS1M */ -#define GETPARAMETERS 0x12 /* CCD/VIDEO/SS1M */ -#define GETBUFFERSIZE 0x13 /* CCD/VIDEO/SS1M */ -#define GETVIDEOTYPE 0x14 /* VIDEO/SS1M */ -#define GETVIDEOSIGNAL 0x15 /* VIDEO */ -#define GETMODULATION 0x16 /* VIDEO */ -#define GETDCYVALUES 0xa0 /* CCD /SS1M */ -#define GETDCYWIDTH 0xa1 /* CCD /SS1M */ -#define GETDCYHEIGHT 0xa2 /* CCD /SS1M */ -#define GETSIZE 0xa3 /* CCD/VIDEO */ -#define GETCOMPRESSION 0xa4 /* CCD/VIDEO */ - -/* detect and get parameters */ - -#define DETECTMODULATION 0x17 /* VIDEO */ -#define DETECTVIDEOTYPE 0x18 /* VIDEO */ -#define DETECTVIDEOSIGNAL 0x19 /* VIDEO */ - -/* configure default parameters */ - -#define CONFIGUREDEFAULT 0x20 /* CCD/VIDEO/SS1M */ -#define DEFSIZE 0x21 /* CCD/VIDEO/SS1M */ -#define DEFCOMPRESSION 0x22 /* CCD/VIDEO/SS1M */ -#define DEFCOLORLEVEL 0x23 /* CCD/VIDEO */ -#define DEFBRIGHTNESS 0x24 /* CCD */ -#define DEFROTATION 0x25 /* CCD */ -#define DEFWHITEBALANCE 0x26 /* CCD */ -#define DEFEXPOSURE 0x27 /* CCD */ -#define DEFAUTOEXPWINDOW 0x28 /* CCD */ -#define DEFTEXT 0x29 /* CCD/VIDEO/SS1M */ -#define DEFCLOCK 0x2a /* CCD/VIDEO/SS1M */ -#define DEFDATE 0x2b /* CCD/VIDEO/SS1M */ -#define DEFTIMEFORMAT 0x2c /* CCD/VIDEO/SS1M */ -#define DEFDATEFORMAT 0x2d /* VIDEO */ -#define DEFTEXTALIGNMENT 0x2e /* VIDEO */ -#define DEFFPS 0x2f /* CCD/VIDEO/SS1M */ -#define DEFTEXTSTRING 0x30 /* CCD/VIDEO/SS1M */ -#define DEFHEADERINFO 0x31 /* CCD/VIDEO/SS1M */ -#define DEFWEXAR 0x32 /* CCD */ -#define DEFLINEDELAY 0x33 /* CCD */ -#define DEFDISABLEDVIDEO 0x34 /* VIDEO */ -#define DEFVIDEOTYPE 0x35 /* VIDEO */ -#define DEFMODULATION 0x36 /* VIDEO */ -#define DEFXOFFSET 0x37 /* VIDEO */ -#define DEFYOFFSET 0x38 /* VIDEO */ -#define DEFYCMODE 0x39 /* VIDEO */ -#define DEFVCRMODE 0x3a /* VIDEO */ -#define DEFSTOREDCYVALUES 0x3b /* CCD/VIDEO/SS1M */ -#define DEFWCDS 0x3c /* CCD */ -#define DEFVGA 0x3d /* VIDEO */ -#define DEFCOMMENT 0x3e /* CCD/VIDEO */ -#define DEFCOMMENTSIZE 0x3f /* CCD/VIDEO */ -#define DEFCOMMENTTEXT 0x50 /* CCD/VIDEO */ -#define DEFSTOREDCYTEXT 0x51 /* VIDEO */ - - -#define JULABORTDMA 0x70 /* Abort current DMA transfer */ - -/* juliette general i/o port */ - -#define JIO_READBITS 0x40 /* read and return current port bits */ -#define JIO_SETBITS 0x41 /* set bits marked by 1 in the argument */ -#define JIO_CLRBITS 0x42 /* clr bits marked by 1 in the argument */ -#define JIO_READDIR 0x43 /* read direction, 0=input 1=output */ -#define JIO_SETINPUT 0x44 /* set direction, 0=unchanged 1=input - returns current dir */ -#define JIO_SETOUTPUT 0x45 /* set direction, 0=unchanged 1=output - returns current dir */ - -/**** YumYum internal adresses ****/ - -/* Juliette buffer addresses */ - -#define BUFFER1_VIDEO 0x1100 -#define BUFFER2_VIDEO 0x2800 -#define ACDC_BUFF_VIDEO 0x0aaa -#define BUFFER1 0x1700 -#define BUFFER2 0x2b01 -#define ACDC_BUFFER 0x1200 -#define BUFFER1_SS1M 0x1100 -#define BUFFER2_SS1M 0x2800 -#define ACDC_BUFF_SS1M 0x0900 - -/* Juliette parameter memory addresses */ - -#define PA_BUFFER_CNT 0x3f09 /* CCD/VIDEO */ -#define PA_CCD_BUFFER 0x3f10 /* CCD */ -#define PA_VIDEO_BUFFER 0x3f10 /* VIDEO */ -#define PA_DCT_BUFFER 0x3f11 /* CCD/VIDEO */ -#define PA_TEMP 0x3f12 /* CCD/VIDEO */ -#define PA_VIDEOLINE_RD 0x3f13 /* VIDEO */ -#define PA_VIDEOLINE_WR 0x3f14 /* VIDEO */ -#define PA_VI_HDELAY0 0x3f15 /* VIDEO */ -#define PA_VI_VDELAY0 0x3f16 /* VIDEO */ -#define PA_VI_HDELAY1 0x3f17 /* VIDEO */ -#define PA_VI_VDELAY1 0x3f18 /* VIDEO */ -#define PA_VI_HDELAY2 0x3f19 /* VIDEO */ -#define PA_VI_VDELAY2 0x3f1a /* VIDEO */ -#define PA_VI_HDELAY3 0x3f1b /* VIDEO */ -#define PA_VI_VDELAY3 0x3f1c /* VIDEO */ -#define PA_VI_CTRL 0x3f20 /* VIDEO */ -#define PA_JPEG_CTRL 0x3f22 /* CCD/VIDEO */ -#define PA_BUFFER_SIZE 0x3f24 /* CCD/VIDEO */ -#define PA_PAL_NTSC 0x3f25 /* VIDEO */ -#define PA_MACROBLOCKS 0x3f26 /* CCD/VIDEO */ -#define PA_COLOR 0x3f27 /* VIDEO */ -#define PA_MEMCH1CNT2 0x3f28 /* CCD/VIDEO */ -#define PA_MEMCH1CNT3 0x3f29 /* VIDEO */ -#define PA_MEMCH1STR2 0x3f2a /* CCD/VIDEO */ -#define PA_MEMCH1STR3 0x3f2b /* VIDEO */ -#define PA_BUFFERS 0x3f2c /* CCD/VIDEO */ -#define PA_PROGRAM 0x3f2d /* CCD/VIDEO */ -#define PA_ROTATION 0x3f2e /* CCD */ -#define PA_PC 0x3f30 /* CCD/VIDEO */ -#define PA_PC2 0x3f31 /* VIDEO */ -#define PA_ODD_LINE 0x3f32 /* VIDEO */ -#define PA_EXP_DELAY 0x3f34 /* CCD */ -#define PA_MACROBLOCK_CNT 0x3f35 /* CCD/VIDEO */ -#define PA_DRAM_PTR1_L 0x3f36 /* CCD/VIDEO */ -#define PA_CLPOB_CNT 0x3f37 /* CCD */ -#define PA_DRAM_PTR1_H 0x3f38 /* CCD/VIDEO */ -#define PA_DRAM_PTR2_L 0x3f3a /* VIDEO */ -#define PA_DRAM_PTR2_H 0x3f3c /* VIDEO */ -#define PA_CCD_LINE_CNT 0x3f3f /* CCD */ -#define PA_VIDEO_LINE_CNT 0x3f3f /* VIDEO */ -#define PA_TEXT 0x3f41 /* CCD/VIDEO */ -#define PA_CAMERA_CHANGED 0x3f42 /* VIDEO */ -#define PA_TEXTALIGNMENT 0x3f43 /* VIDEO */ -#define PA_DISABLED 0x3f44 /* VIDEO */ -#define PA_MACROBLOCKTEXT 0x3f45 /* VIDEO */ -#define PA_VGA 0x3f46 /* VIDEO */ -#define PA_ZERO 0x3ffe /* VIDEO */ -#define PA_NULL 0x3fff /* CCD/VIDEO */ - -typedef enum { - jpeg = 0, - dummy = 1 -} request_type; - -typedef enum { - hugesize = 0, - fullsize = 1, - halfsize = 2, - fieldsize = 3 -} size_type; - -typedef enum { - min = 0, - low = 1, - medium = 2, - high = 3, - very_high = 4, - very_low = 5, - q1 = 6, - q2 = 7, - q3 = 8, - q4 = 9, - q5 = 10, - q6 = 11 -} compr_type; - -typedef enum { - deg_0 = 0, - deg_180 = 1, - deg_90 = 2, - deg_270 = 3 -} rotation_type; - -typedef enum { - auto_white = 0, - hold = 1, - fixed_outdoor = 2, - fixed_indoor = 3, - fixed_fluor = 4 -} white_balance_type; - -typedef enum { - auto_exp = 0, - fixed_exp = 1 -} exposure_type; - -typedef enum { - no_window = 0, - center = 1, - top = 2, - lower = 3, - left = 4, - right = 5, - spot = 6, - cw = 7 -} exp_window_type; - -typedef enum { - h_24 = 0, - h_12 = 1, - h_24P = 2 -} hour_type; - -typedef enum { - standard = 0, - YYYY_MM_DD = 1, - Www_Mmm_DD_YYYY = 2, - Www_DD_MM_YYYY = 3 -} date_type; - -typedef enum { - left_align = 0, - center_align = 1, - right_align = 2 -} alignment_type; - -typedef enum { - off = 0, - on = 1, - no = 0, - yes = 1 -} enable_type; - -typedef enum { - disabled = 0, - enabled = 1, - extended = 2 -} comment_type; - -typedef enum { - pal = 0, - ntsc = 1 -} video_type; - -typedef enum { - pal_bghi_ntsc_m = 0, - ntsc_4_43_50hz_pal_4_43_60hz = 1, - pal_n_ntsc_4_43_60hz = 2, - ntsc_n_pal_m = 3, - secam_pal_4_43_60hz = 4 -} modulation_type; - -typedef enum { - cam0 = 0, - cam1 = 1, - cam2 = 2, - cam3 = 3, - quad = 32 -} camera_type; - -typedef enum { - video_driver = 0, - ccd_driver = 1 -} driver_type; - -struct jul_param { - request_type req_type; - size_type size; - compr_type compression; - rotation_type rotation; - int color_level; - int brightness; - white_balance_type white_balance; - exposure_type exposure; - exp_window_type auto_exp_window; - hour_type time_format; - date_type date_format; - alignment_type text_alignment; - enable_type text; - enable_type clock; - enable_type date; - enable_type fps; - enable_type vga; - enable_type comment; -}; - -struct video_param { - enable_type disabled; - modulation_type modulation; - video_type video; - enable_type signal; - enable_type vcr; - int xoffset; - int yoffset; -}; - -/* The juliette_request structure is used during the JULSTARTDMA asynchronous - * picture-taking ioctl call as an argument to specify a buffer which will get - * the final picture. - */ - -struct juliette_request { - char *buf; /* Pointer to the buffer to hold picture data */ - unsigned int buflen; /* Length of the above buffer */ - unsigned int size; /* Resulting length, 0 if the picture is not ready */ -}; - -#endif diff --git a/include/asm-cris/arch-v32/mach-a3/arbiter.h b/include/asm-cris/arch-v32/mach-a3/arbiter.h new file mode 100644 index 000000000000..65e9d6ff0520 --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/arbiter.h @@ -0,0 +1,34 @@ +#ifndef _ASM_CRIS_ARCH_ARBITER_H +#define _ASM_CRIS_ARCH_ARBITER_H + +#define EXT_REGION 0 +#define INT_REGION 1 + +typedef void (watch_callback)(void); + +enum { + arbiter_all_dmas = 0x7fe, + arbiter_cpu = 0x1800, + arbiter_all_clients = 0x7fff +}; + +enum { + arbiter_bar_all_clients = 0x1ff +}; + +enum { + arbiter_all_read = 0x55, + arbiter_all_write = 0xaa, + arbiter_all_accesses = 0xff +}; + +#define MARB_CLIENTS(foo_cli, bar_cli) (((bar_cli) << 16) | (foo_cli)) + +int crisv32_arbiter_allocate_bandwidth(int client, int region, + unsigned long bandwidth); +int crisv32_arbiter_watch(unsigned long start, unsigned long size, + unsigned long clients, unsigned long accesses, + watch_callback * cb); +int crisv32_arbiter_unwatch(int id); + +#endif diff --git a/include/asm-cris/arch-v32/mach-a3/dma.h b/include/asm-cris/arch-v32/mach-a3/dma.h new file mode 100644 index 000000000000..9e8eb13b601d --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/dma.h @@ -0,0 +1,31 @@ +#ifndef _ASM_ARCH_CRIS_DMA_H +#define _ASM_ARCH_CRIS_DMA_H + +/* Defines for using and allocating dma channels. */ + +#define MAX_DMA_CHANNELS 12 /* 8 and 10 not used. */ + +enum dma_owner { + dma_eth, + dma_ser0, + dma_ser1, + dma_ser2, + dma_ser3, + dma_ser4, + dma_iop, + dma_sser, + dma_strp, + dma_h264, + dma_jpeg +}; + +int crisv32_request_dma(unsigned int dmanr, const char *device_id, + unsigned options, unsigned bandwidth, enum dma_owner owner); +void crisv32_free_dma(unsigned int dmanr); + +/* Masks used by crisv32_request_dma options: */ +#define DMA_VERBOSE_ON_ERROR 1 +#define DMA_PANIC_ON_ERROR (2|DMA_VERBOSE_ON_ERROR) +#define DMA_INT_MEM 4 + +#endif /* _ASM_ARCH_CRIS_DMA_H */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/asm/clkgen_defs_asm.h b/include/asm-cris/arch-v32/mach-a3/hwregs/asm/clkgen_defs_asm.h new file mode 100644 index 000000000000..02855adf63e8 --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/asm/clkgen_defs_asm.h @@ -0,0 +1,164 @@ +#ifndef __clkgen_defs_asm_h +#define __clkgen_defs_asm_h + +/* + * This file is autogenerated from + * file: clkgen.r + * + * by ../../../tools/rdesc/bin/rdes2c -asm -outfile clkgen_defs_asm.h clkgen.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register r_bootsel, scope clkgen, type r */ +#define reg_clkgen_r_bootsel___boot_mode___lsb 0 +#define reg_clkgen_r_bootsel___boot_mode___width 5 +#define reg_clkgen_r_bootsel___intern_main_clk___lsb 5 +#define reg_clkgen_r_bootsel___intern_main_clk___width 1 +#define reg_clkgen_r_bootsel___intern_main_clk___bit 5 +#define reg_clkgen_r_bootsel___extern_usb2_clk___lsb 6 +#define reg_clkgen_r_bootsel___extern_usb2_clk___width 1 +#define reg_clkgen_r_bootsel___extern_usb2_clk___bit 6 +#define reg_clkgen_r_bootsel_offset 0 + +/* Register rw_clk_ctrl, scope clkgen, type rw */ +#define reg_clkgen_rw_clk_ctrl___pll___lsb 0 +#define reg_clkgen_rw_clk_ctrl___pll___width 1 +#define reg_clkgen_rw_clk_ctrl___pll___bit 0 +#define reg_clkgen_rw_clk_ctrl___cpu___lsb 1 +#define reg_clkgen_rw_clk_ctrl___cpu___width 1 +#define reg_clkgen_rw_clk_ctrl___cpu___bit 1 +#define reg_clkgen_rw_clk_ctrl___iop_usb___lsb 2 +#define reg_clkgen_rw_clk_ctrl___iop_usb___width 1 +#define reg_clkgen_rw_clk_ctrl___iop_usb___bit 2 +#define reg_clkgen_rw_clk_ctrl___vin___lsb 3 +#define reg_clkgen_rw_clk_ctrl___vin___width 1 +#define reg_clkgen_rw_clk_ctrl___vin___bit 3 +#define reg_clkgen_rw_clk_ctrl___sclr___lsb 4 +#define reg_clkgen_rw_clk_ctrl___sclr___width 1 +#define reg_clkgen_rw_clk_ctrl___sclr___bit 4 +#define reg_clkgen_rw_clk_ctrl___h264___lsb 5 +#define reg_clkgen_rw_clk_ctrl___h264___width 1 +#define reg_clkgen_rw_clk_ctrl___h264___bit 5 +#define reg_clkgen_rw_clk_ctrl___ddr2___lsb 6 +#define reg_clkgen_rw_clk_ctrl___ddr2___width 1 +#define reg_clkgen_rw_clk_ctrl___ddr2___bit 6 +#define reg_clkgen_rw_clk_ctrl___vout_hist___lsb 7 +#define reg_clkgen_rw_clk_ctrl___vout_hist___width 1 +#define reg_clkgen_rw_clk_ctrl___vout_hist___bit 7 +#define reg_clkgen_rw_clk_ctrl___eth___lsb 8 +#define reg_clkgen_rw_clk_ctrl___eth___width 1 +#define reg_clkgen_rw_clk_ctrl___eth___bit 8 +#define reg_clkgen_rw_clk_ctrl___ccd_tg_200___lsb 9 +#define reg_clkgen_rw_clk_ctrl___ccd_tg_200___width 1 +#define reg_clkgen_rw_clk_ctrl___ccd_tg_200___bit 9 +#define reg_clkgen_rw_clk_ctrl___dma0_1_eth___lsb 10 +#define reg_clkgen_rw_clk_ctrl___dma0_1_eth___width 1 +#define reg_clkgen_rw_clk_ctrl___dma0_1_eth___bit 10 +#define reg_clkgen_rw_clk_ctrl___ccd_tg_100___lsb 11 +#define reg_clkgen_rw_clk_ctrl___ccd_tg_100___width 1 +#define reg_clkgen_rw_clk_ctrl___ccd_tg_100___bit 11 +#define reg_clkgen_rw_clk_ctrl___jpeg___lsb 12 +#define reg_clkgen_rw_clk_ctrl___jpeg___width 1 +#define reg_clkgen_rw_clk_ctrl___jpeg___bit 12 +#define reg_clkgen_rw_clk_ctrl___sser_ser_dma6_7___lsb 13 +#define reg_clkgen_rw_clk_ctrl___sser_ser_dma6_7___width 1 +#define reg_clkgen_rw_clk_ctrl___sser_ser_dma6_7___bit 13 +#define reg_clkgen_rw_clk_ctrl___strdma0_2_video___lsb 14 +#define reg_clkgen_rw_clk_ctrl___strdma0_2_video___width 1 +#define reg_clkgen_rw_clk_ctrl___strdma0_2_video___bit 14 +#define reg_clkgen_rw_clk_ctrl___dma2_3_strcop___lsb 15 +#define reg_clkgen_rw_clk_ctrl___dma2_3_strcop___width 1 +#define reg_clkgen_rw_clk_ctrl___dma2_3_strcop___bit 15 +#define reg_clkgen_rw_clk_ctrl___dma4_5_iop___lsb 16 +#define reg_clkgen_rw_clk_ctrl___dma4_5_iop___width 1 +#define reg_clkgen_rw_clk_ctrl___dma4_5_iop___bit 16 +#define reg_clkgen_rw_clk_ctrl___dma9_11___lsb 17 +#define reg_clkgen_rw_clk_ctrl___dma9_11___width 1 +#define reg_clkgen_rw_clk_ctrl___dma9_11___bit 17 +#define reg_clkgen_rw_clk_ctrl___memarb_bar_ddr___lsb 18 +#define reg_clkgen_rw_clk_ctrl___memarb_bar_ddr___width 1 +#define reg_clkgen_rw_clk_ctrl___memarb_bar_ddr___bit 18 +#define reg_clkgen_rw_clk_ctrl___sclr_h264___lsb 19 +#define reg_clkgen_rw_clk_ctrl___sclr_h264___width 1 +#define reg_clkgen_rw_clk_ctrl___sclr_h264___bit 19 +#define reg_clkgen_rw_clk_ctrl_offset 4 + + +/* Constants */ +#define regk_clkgen_eth1000_rx 0x0000000c +#define regk_clkgen_eth1000_tx 0x0000000e +#define regk_clkgen_eth100_rx 0x0000001d +#define regk_clkgen_eth100_rx_half 0x0000001c +#define regk_clkgen_eth100_tx 0x0000001f +#define regk_clkgen_eth100_tx_half 0x0000001e +#define regk_clkgen_nand_3_2 0x00000000 +#define regk_clkgen_nand_3_2_0x30 0x00000002 +#define regk_clkgen_nand_3_2_0x30_pll 0x00000012 +#define regk_clkgen_nand_3_2_pll 0x00000010 +#define regk_clkgen_nand_3_3 0x00000001 +#define regk_clkgen_nand_3_3_0x30 0x00000003 +#define regk_clkgen_nand_3_3_0x30_pll 0x00000013 +#define regk_clkgen_nand_3_3_pll 0x00000011 +#define regk_clkgen_nand_4_2 0x00000004 +#define regk_clkgen_nand_4_2_0x30 0x00000006 +#define regk_clkgen_nand_4_2_0x30_pll 0x00000016 +#define regk_clkgen_nand_4_2_pll 0x00000014 +#define regk_clkgen_nand_4_3 0x00000005 +#define regk_clkgen_nand_4_3_0x30 0x00000007 +#define regk_clkgen_nand_4_3_0x30_pll 0x00000017 +#define regk_clkgen_nand_4_3_pll 0x00000015 +#define regk_clkgen_nand_5_2 0x00000008 +#define regk_clkgen_nand_5_2_0x30 0x0000000a +#define regk_clkgen_nand_5_2_0x30_pll 0x0000001a +#define regk_clkgen_nand_5_2_pll 0x00000018 +#define regk_clkgen_nand_5_3 0x00000009 +#define regk_clkgen_nand_5_3_0x30 0x0000000b +#define regk_clkgen_nand_5_3_0x30_pll 0x0000001b +#define regk_clkgen_nand_5_3_pll 0x00000019 +#define regk_clkgen_no 0x00000000 +#define regk_clkgen_rw_clk_ctrl_default 0x00000002 +#define regk_clkgen_ser 0x0000000d +#define regk_clkgen_ser_pll 0x0000000f +#define regk_clkgen_yes 0x00000001 +#endif /* __clkgen_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/asm/ddr2_defs_asm.h b/include/asm-cris/arch-v32/mach-a3/hwregs/asm/ddr2_defs_asm.h new file mode 100644 index 000000000000..b12be03edacb --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/asm/ddr2_defs_asm.h @@ -0,0 +1,266 @@ +#ifndef __ddr2_defs_asm_h +#define __ddr2_defs_asm_h + +/* + * This file is autogenerated from + * file: ddr2.r + * + * by ../../../tools/rdesc/bin/rdes2c -asm -outfile ddr2_defs_asm.h ddr2.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_cfg, scope ddr2, type rw */ +#define reg_ddr2_rw_cfg___col_width___lsb 0 +#define reg_ddr2_rw_cfg___col_width___width 4 +#define reg_ddr2_rw_cfg___nr_banks___lsb 4 +#define reg_ddr2_rw_cfg___nr_banks___width 1 +#define reg_ddr2_rw_cfg___nr_banks___bit 4 +#define reg_ddr2_rw_cfg___bw___lsb 5 +#define reg_ddr2_rw_cfg___bw___width 1 +#define reg_ddr2_rw_cfg___bw___bit 5 +#define reg_ddr2_rw_cfg___nr_ref___lsb 6 +#define reg_ddr2_rw_cfg___nr_ref___width 4 +#define reg_ddr2_rw_cfg___ref_interval___lsb 10 +#define reg_ddr2_rw_cfg___ref_interval___width 11 +#define reg_ddr2_rw_cfg___odt_ctrl___lsb 21 +#define reg_ddr2_rw_cfg___odt_ctrl___width 2 +#define reg_ddr2_rw_cfg___odt_mem___lsb 23 +#define reg_ddr2_rw_cfg___odt_mem___width 1 +#define reg_ddr2_rw_cfg___odt_mem___bit 23 +#define reg_ddr2_rw_cfg___imp_strength___lsb 24 +#define reg_ddr2_rw_cfg___imp_strength___width 1 +#define reg_ddr2_rw_cfg___imp_strength___bit 24 +#define reg_ddr2_rw_cfg___auto_imp_cal___lsb 25 +#define reg_ddr2_rw_cfg___auto_imp_cal___width 1 +#define reg_ddr2_rw_cfg___auto_imp_cal___bit 25 +#define reg_ddr2_rw_cfg___imp_cal_override___lsb 26 +#define reg_ddr2_rw_cfg___imp_cal_override___width 1 +#define reg_ddr2_rw_cfg___imp_cal_override___bit 26 +#define reg_ddr2_rw_cfg___dll_override___lsb 27 +#define reg_ddr2_rw_cfg___dll_override___width 1 +#define reg_ddr2_rw_cfg___dll_override___bit 27 +#define reg_ddr2_rw_cfg_offset 0 + +/* Register rw_timing, scope ddr2, type rw */ +#define reg_ddr2_rw_timing___wr___lsb 0 +#define reg_ddr2_rw_timing___wr___width 3 +#define reg_ddr2_rw_timing___rcd___lsb 3 +#define reg_ddr2_rw_timing___rcd___width 3 +#define reg_ddr2_rw_timing___rp___lsb 6 +#define reg_ddr2_rw_timing___rp___width 3 +#define reg_ddr2_rw_timing___ras___lsb 9 +#define reg_ddr2_rw_timing___ras___width 4 +#define reg_ddr2_rw_timing___rfc___lsb 13 +#define reg_ddr2_rw_timing___rfc___width 7 +#define reg_ddr2_rw_timing___rc___lsb 20 +#define reg_ddr2_rw_timing___rc___width 5 +#define reg_ddr2_rw_timing___rtp___lsb 25 +#define reg_ddr2_rw_timing___rtp___width 2 +#define reg_ddr2_rw_timing___rtw___lsb 27 +#define reg_ddr2_rw_timing___rtw___width 3 +#define reg_ddr2_rw_timing___wtr___lsb 30 +#define reg_ddr2_rw_timing___wtr___width 2 +#define reg_ddr2_rw_timing_offset 4 + +/* Register rw_latency, scope ddr2, type rw */ +#define reg_ddr2_rw_latency___cas___lsb 0 +#define reg_ddr2_rw_latency___cas___width 3 +#define reg_ddr2_rw_latency___additive___lsb 3 +#define reg_ddr2_rw_latency___additive___width 3 +#define reg_ddr2_rw_latency_offset 8 + +/* Register rw_phy_cfg, scope ddr2, type rw */ +#define reg_ddr2_rw_phy_cfg___en___lsb 0 +#define reg_ddr2_rw_phy_cfg___en___width 1 +#define reg_ddr2_rw_phy_cfg___en___bit 0 +#define reg_ddr2_rw_phy_cfg_offset 12 + +/* Register rw_phy_ctrl, scope ddr2, type rw */ +#define reg_ddr2_rw_phy_ctrl___rst___lsb 0 +#define reg_ddr2_rw_phy_ctrl___rst___width 1 +#define reg_ddr2_rw_phy_ctrl___rst___bit 0 +#define reg_ddr2_rw_phy_ctrl___cal_rst___lsb 1 +#define reg_ddr2_rw_phy_ctrl___cal_rst___width 1 +#define reg_ddr2_rw_phy_ctrl___cal_rst___bit 1 +#define reg_ddr2_rw_phy_ctrl___cal_start___lsb 2 +#define reg_ddr2_rw_phy_ctrl___cal_start___width 1 +#define reg_ddr2_rw_phy_ctrl___cal_start___bit 2 +#define reg_ddr2_rw_phy_ctrl_offset 16 + +/* Register rw_ctrl, scope ddr2, type rw */ +#define reg_ddr2_rw_ctrl___mrs_data___lsb 0 +#define reg_ddr2_rw_ctrl___mrs_data___width 16 +#define reg_ddr2_rw_ctrl___cmd___lsb 16 +#define reg_ddr2_rw_ctrl___cmd___width 8 +#define reg_ddr2_rw_ctrl_offset 20 + +/* Register rw_pwr_down, scope ddr2, type rw */ +#define reg_ddr2_rw_pwr_down___self_ref___lsb 0 +#define reg_ddr2_rw_pwr_down___self_ref___width 2 +#define reg_ddr2_rw_pwr_down___phy_en___lsb 2 +#define reg_ddr2_rw_pwr_down___phy_en___width 1 +#define reg_ddr2_rw_pwr_down___phy_en___bit 2 +#define reg_ddr2_rw_pwr_down_offset 24 + +/* Register r_stat, scope ddr2, type r */ +#define reg_ddr2_r_stat___dll_lock___lsb 0 +#define reg_ddr2_r_stat___dll_lock___width 1 +#define reg_ddr2_r_stat___dll_lock___bit 0 +#define reg_ddr2_r_stat___dll_delay_code___lsb 1 +#define reg_ddr2_r_stat___dll_delay_code___width 7 +#define reg_ddr2_r_stat___imp_cal_done___lsb 8 +#define reg_ddr2_r_stat___imp_cal_done___width 1 +#define reg_ddr2_r_stat___imp_cal_done___bit 8 +#define reg_ddr2_r_stat___imp_cal_fault___lsb 9 +#define reg_ddr2_r_stat___imp_cal_fault___width 1 +#define reg_ddr2_r_stat___imp_cal_fault___bit 9 +#define reg_ddr2_r_stat___cal_imp_pu___lsb 10 +#define reg_ddr2_r_stat___cal_imp_pu___width 4 +#define reg_ddr2_r_stat___cal_imp_pd___lsb 14 +#define reg_ddr2_r_stat___cal_imp_pd___width 4 +#define reg_ddr2_r_stat_offset 28 + +/* Register rw_imp_ctrl, scope ddr2, type rw */ +#define reg_ddr2_rw_imp_ctrl___imp_pu___lsb 0 +#define reg_ddr2_rw_imp_ctrl___imp_pu___width 4 +#define reg_ddr2_rw_imp_ctrl___imp_pd___lsb 4 +#define reg_ddr2_rw_imp_ctrl___imp_pd___width 4 +#define reg_ddr2_rw_imp_ctrl_offset 32 + +#define STRIDE_ddr2_rw_dll_ctrl 4 +/* Register rw_dll_ctrl, scope ddr2, type rw */ +#define reg_ddr2_rw_dll_ctrl___mode___lsb 0 +#define reg_ddr2_rw_dll_ctrl___mode___width 1 +#define reg_ddr2_rw_dll_ctrl___mode___bit 0 +#define reg_ddr2_rw_dll_ctrl___clk_delay___lsb 1 +#define reg_ddr2_rw_dll_ctrl___clk_delay___width 7 +#define reg_ddr2_rw_dll_ctrl_offset 36 + +#define STRIDE_ddr2_rw_dqs_dll_ctrl 4 +/* Register rw_dqs_dll_ctrl, scope ddr2, type rw */ +#define reg_ddr2_rw_dqs_dll_ctrl___dqs90_delay___lsb 0 +#define reg_ddr2_rw_dqs_dll_ctrl___dqs90_delay___width 7 +#define reg_ddr2_rw_dqs_dll_ctrl___dqs180_delay___lsb 7 +#define reg_ddr2_rw_dqs_dll_ctrl___dqs180_delay___width 7 +#define reg_ddr2_rw_dqs_dll_ctrl___dqs270_delay___lsb 14 +#define reg_ddr2_rw_dqs_dll_ctrl___dqs270_delay___width 7 +#define reg_ddr2_rw_dqs_dll_ctrl___dqs360_delay___lsb 21 +#define reg_ddr2_rw_dqs_dll_ctrl___dqs360_delay___width 7 +#define reg_ddr2_rw_dqs_dll_ctrl_offset 52 + + +/* Constants */ +#define regk_ddr2_al0 0x00000000 +#define regk_ddr2_al1 0x00000008 +#define regk_ddr2_al2 0x00000010 +#define regk_ddr2_al3 0x00000018 +#define regk_ddr2_al4 0x00000020 +#define regk_ddr2_auto 0x00000003 +#define regk_ddr2_bank4 0x00000000 +#define regk_ddr2_bank8 0x00000001 +#define regk_ddr2_bl4 0x00000002 +#define regk_ddr2_bl8 0x00000003 +#define regk_ddr2_bt_il 0x00000008 +#define regk_ddr2_bt_seq 0x00000000 +#define regk_ddr2_bw16 0x00000001 +#define regk_ddr2_bw32 0x00000000 +#define regk_ddr2_cas2 0x00000020 +#define regk_ddr2_cas3 0x00000030 +#define regk_ddr2_cas4 0x00000040 +#define regk_ddr2_cas5 0x00000050 +#define regk_ddr2_deselect 0x000000c0 +#define regk_ddr2_dic_weak 0x00000002 +#define regk_ddr2_direct 0x00000001 +#define regk_ddr2_dis 0x00000000 +#define regk_ddr2_dll_dis 0x00000001 +#define regk_ddr2_dll_en 0x00000000 +#define regk_ddr2_dll_rst 0x00000100 +#define regk_ddr2_emrs 0x00000081 +#define regk_ddr2_emrs2 0x00000082 +#define regk_ddr2_emrs3 0x00000083 +#define regk_ddr2_full 0x00000001 +#define regk_ddr2_hi_ref_rate 0x00000080 +#define regk_ddr2_mrs 0x00000080 +#define regk_ddr2_no 0x00000000 +#define regk_ddr2_nop 0x000000b8 +#define regk_ddr2_ocd_adj 0x00000200 +#define regk_ddr2_ocd_default 0x00000380 +#define regk_ddr2_ocd_drive0 0x00000100 +#define regk_ddr2_ocd_drive1 0x00000080 +#define regk_ddr2_ocd_exit 0x00000000 +#define regk_ddr2_odt_dis 0x00000000 +#define regk_ddr2_offs 0x00000000 +#define regk_ddr2_pre 0x00000090 +#define regk_ddr2_pre_all 0x00000400 +#define regk_ddr2_pwr_down_fast 0x00000000 +#define regk_ddr2_pwr_down_slow 0x00001000 +#define regk_ddr2_ref 0x00000088 +#define regk_ddr2_rtt150 0x00000040 +#define regk_ddr2_rtt50 0x00000044 +#define regk_ddr2_rtt75 0x00000004 +#define regk_ddr2_rw_cfg_default 0x00186000 +#define regk_ddr2_rw_dll_ctrl_default 0x00000000 +#define regk_ddr2_rw_dll_ctrl_size 0x00000004 +#define regk_ddr2_rw_dqs_dll_ctrl_default 0x00000000 +#define regk_ddr2_rw_dqs_dll_ctrl_size 0x00000004 +#define regk_ddr2_rw_latency_default 0x00000000 +#define regk_ddr2_rw_phy_cfg_default 0x00000000 +#define regk_ddr2_rw_pwr_down_default 0x00000000 +#define regk_ddr2_rw_timing_default 0x00000000 +#define regk_ddr2_s1Gb 0x0000001a +#define regk_ddr2_s256Mb 0x0000000f +#define regk_ddr2_s2Gb 0x00000027 +#define regk_ddr2_s4Gb 0x00000042 +#define regk_ddr2_s512Mb 0x00000015 +#define regk_ddr2_temp0_85 0x00000618 +#define regk_ddr2_temp85_95 0x0000030c +#define regk_ddr2_term150 0x00000002 +#define regk_ddr2_term50 0x00000003 +#define regk_ddr2_term75 0x00000001 +#define regk_ddr2_test 0x00000080 +#define regk_ddr2_weak 0x00000000 +#define regk_ddr2_wr2 0x00000200 +#define regk_ddr2_wr3 0x00000400 +#define regk_ddr2_yes 0x00000001 +#endif /* __ddr2_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/asm/gio_defs_asm.h b/include/asm-cris/arch-v32/mach-a3/hwregs/asm/gio_defs_asm.h new file mode 100644 index 000000000000..df6714fda179 --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/asm/gio_defs_asm.h @@ -0,0 +1,849 @@ +#ifndef __gio_defs_asm_h +#define __gio_defs_asm_h + +/* + * This file is autogenerated from + * file: gio.r + * + * by ../../../tools/rdesc/bin/rdes2c -asm -outfile gio_defs_asm.h gio.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register r_pa_din, scope gio, type r */ +#define reg_gio_r_pa_din___data___lsb 0 +#define reg_gio_r_pa_din___data___width 32 +#define reg_gio_r_pa_din_offset 0 + +/* Register rw_pa_dout, scope gio, type rw */ +#define reg_gio_rw_pa_dout___data___lsb 0 +#define reg_gio_rw_pa_dout___data___width 32 +#define reg_gio_rw_pa_dout_offset 4 + +/* Register rw_pa_oe, scope gio, type rw */ +#define reg_gio_rw_pa_oe___oe___lsb 0 +#define reg_gio_rw_pa_oe___oe___width 32 +#define reg_gio_rw_pa_oe_offset 8 + +/* Register rw_pa_byte0_dout, scope gio, type rw */ +#define reg_gio_rw_pa_byte0_dout___data___lsb 0 +#define reg_gio_rw_pa_byte0_dout___data___width 8 +#define reg_gio_rw_pa_byte0_dout_offset 12 + +/* Register rw_pa_byte0_oe, scope gio, type rw */ +#define reg_gio_rw_pa_byte0_oe___oe___lsb 0 +#define reg_gio_rw_pa_byte0_oe___oe___width 8 +#define reg_gio_rw_pa_byte0_oe_offset 16 + +/* Register rw_pa_byte1_dout, scope gio, type rw */ +#define reg_gio_rw_pa_byte1_dout___data___lsb 0 +#define reg_gio_rw_pa_byte1_dout___data___width 8 +#define reg_gio_rw_pa_byte1_dout_offset 20 + +/* Register rw_pa_byte1_oe, scope gio, type rw */ +#define reg_gio_rw_pa_byte1_oe___oe___lsb 0 +#define reg_gio_rw_pa_byte1_oe___oe___width 8 +#define reg_gio_rw_pa_byte1_oe_offset 24 + +/* Register rw_pa_byte2_dout, scope gio, type rw */ +#define reg_gio_rw_pa_byte2_dout___data___lsb 0 +#define reg_gio_rw_pa_byte2_dout___data___width 8 +#define reg_gio_rw_pa_byte2_dout_offset 28 + +/* Register rw_pa_byte2_oe, scope gio, type rw */ +#define reg_gio_rw_pa_byte2_oe___oe___lsb 0 +#define reg_gio_rw_pa_byte2_oe___oe___width 8 +#define reg_gio_rw_pa_byte2_oe_offset 32 + +/* Register rw_pa_byte3_dout, scope gio, type rw */ +#define reg_gio_rw_pa_byte3_dout___data___lsb 0 +#define reg_gio_rw_pa_byte3_dout___data___width 8 +#define reg_gio_rw_pa_byte3_dout_offset 36 + +/* Register rw_pa_byte3_oe, scope gio, type rw */ +#define reg_gio_rw_pa_byte3_oe___oe___lsb 0 +#define reg_gio_rw_pa_byte3_oe___oe___width 8 +#define reg_gio_rw_pa_byte3_oe_offset 40 + +/* Register r_pb_din, scope gio, type r */ +#define reg_gio_r_pb_din___data___lsb 0 +#define reg_gio_r_pb_din___data___width 32 +#define reg_gio_r_pb_din_offset 44 + +/* Register rw_pb_dout, scope gio, type rw */ +#define reg_gio_rw_pb_dout___data___lsb 0 +#define reg_gio_rw_pb_dout___data___width 32 +#define reg_gio_rw_pb_dout_offset 48 + +/* Register rw_pb_oe, scope gio, type rw */ +#define reg_gio_rw_pb_oe___oe___lsb 0 +#define reg_gio_rw_pb_oe___oe___width 32 +#define reg_gio_rw_pb_oe_offset 52 + +/* Register rw_pb_byte0_dout, scope gio, type rw */ +#define reg_gio_rw_pb_byte0_dout___data___lsb 0 +#define reg_gio_rw_pb_byte0_dout___data___width 8 +#define reg_gio_rw_pb_byte0_dout_offset 56 + +/* Register rw_pb_byte0_oe, scope gio, type rw */ +#define reg_gio_rw_pb_byte0_oe___oe___lsb 0 +#define reg_gio_rw_pb_byte0_oe___oe___width 8 +#define reg_gio_rw_pb_byte0_oe_offset 60 + +/* Register rw_pb_byte1_dout, scope gio, type rw */ +#define reg_gio_rw_pb_byte1_dout___data___lsb 0 +#define reg_gio_rw_pb_byte1_dout___data___width 8 +#define reg_gio_rw_pb_byte1_dout_offset 64 + +/* Register rw_pb_byte1_oe, scope gio, type rw */ +#define reg_gio_rw_pb_byte1_oe___oe___lsb 0 +#define reg_gio_rw_pb_byte1_oe___oe___width 8 +#define reg_gio_rw_pb_byte1_oe_offset 68 + +/* Register rw_pb_byte2_dout, scope gio, type rw */ +#define reg_gio_rw_pb_byte2_dout___data___lsb 0 +#define reg_gio_rw_pb_byte2_dout___data___width 8 +#define reg_gio_rw_pb_byte2_dout_offset 72 + +/* Register rw_pb_byte2_oe, scope gio, type rw */ +#define reg_gio_rw_pb_byte2_oe___oe___lsb 0 +#define reg_gio_rw_pb_byte2_oe___oe___width 8 +#define reg_gio_rw_pb_byte2_oe_offset 76 + +/* Register rw_pb_byte3_dout, scope gio, type rw */ +#define reg_gio_rw_pb_byte3_dout___data___lsb 0 +#define reg_gio_rw_pb_byte3_dout___data___width 8 +#define reg_gio_rw_pb_byte3_dout_offset 80 + +/* Register rw_pb_byte3_oe, scope gio, type rw */ +#define reg_gio_rw_pb_byte3_oe___oe___lsb 0 +#define reg_gio_rw_pb_byte3_oe___oe___width 8 +#define reg_gio_rw_pb_byte3_oe_offset 84 + +/* Register r_pc_din, scope gio, type r */ +#define reg_gio_r_pc_din___data___lsb 0 +#define reg_gio_r_pc_din___data___width 16 +#define reg_gio_r_pc_din_offset 88 + +/* Register rw_pc_dout, scope gio, type rw */ +#define reg_gio_rw_pc_dout___data___lsb 0 +#define reg_gio_rw_pc_dout___data___width 16 +#define reg_gio_rw_pc_dout_offset 92 + +/* Register rw_pc_oe, scope gio, type rw */ +#define reg_gio_rw_pc_oe___oe___lsb 0 +#define reg_gio_rw_pc_oe___oe___width 16 +#define reg_gio_rw_pc_oe_offset 96 + +/* Register rw_pc_byte0_dout, scope gio, type rw */ +#define reg_gio_rw_pc_byte0_dout___data___lsb 0 +#define reg_gio_rw_pc_byte0_dout___data___width 8 +#define reg_gio_rw_pc_byte0_dout_offset 100 + +/* Register rw_pc_byte0_oe, scope gio, type rw */ +#define reg_gio_rw_pc_byte0_oe___oe___lsb 0 +#define reg_gio_rw_pc_byte0_oe___oe___width 8 +#define reg_gio_rw_pc_byte0_oe_offset 104 + +/* Register rw_pc_byte1_dout, scope gio, type rw */ +#define reg_gio_rw_pc_byte1_dout___data___lsb 0 +#define reg_gio_rw_pc_byte1_dout___data___width 8 +#define reg_gio_rw_pc_byte1_dout_offset 108 + +/* Register rw_pc_byte1_oe, scope gio, type rw */ +#define reg_gio_rw_pc_byte1_oe___oe___lsb 0 +#define reg_gio_rw_pc_byte1_oe___oe___width 8 +#define reg_gio_rw_pc_byte1_oe_offset 112 + +/* Register r_pd_din, scope gio, type r */ +#define reg_gio_r_pd_din___data___lsb 0 +#define reg_gio_r_pd_din___data___width 32 +#define reg_gio_r_pd_din_offset 116 + +/* Register rw_intr_cfg, scope gio, type rw */ +#define reg_gio_rw_intr_cfg___intr0___lsb 0 +#define reg_gio_rw_intr_cfg___intr0___width 3 +#define reg_gio_rw_intr_cfg___intr1___lsb 3 +#define reg_gio_rw_intr_cfg___intr1___width 3 +#define reg_gio_rw_intr_cfg___intr2___lsb 6 +#define reg_gio_rw_intr_cfg___intr2___width 3 +#define reg_gio_rw_intr_cfg___intr3___lsb 9 +#define reg_gio_rw_intr_cfg___intr3___width 3 +#define reg_gio_rw_intr_cfg___intr4___lsb 12 +#define reg_gio_rw_intr_cfg___intr4___width 3 +#define reg_gio_rw_intr_cfg___intr5___lsb 15 +#define reg_gio_rw_intr_cfg___intr5___width 3 +#define reg_gio_rw_intr_cfg___intr6___lsb 18 +#define reg_gio_rw_intr_cfg___intr6___width 3 +#define reg_gio_rw_intr_cfg___intr7___lsb 21 +#define reg_gio_rw_intr_cfg___intr7___width 3 +#define reg_gio_rw_intr_cfg_offset 120 + +/* Register rw_intr_pins, scope gio, type rw */ +#define reg_gio_rw_intr_pins___intr0___lsb 0 +#define reg_gio_rw_intr_pins___intr0___width 4 +#define reg_gio_rw_intr_pins___intr1___lsb 4 +#define reg_gio_rw_intr_pins___intr1___width 4 +#define reg_gio_rw_intr_pins___intr2___lsb 8 +#define reg_gio_rw_intr_pins___intr2___width 4 +#define reg_gio_rw_intr_pins___intr3___lsb 12 +#define reg_gio_rw_intr_pins___intr3___width 4 +#define reg_gio_rw_intr_pins___intr4___lsb 16 +#define reg_gio_rw_intr_pins___intr4___width 4 +#define reg_gio_rw_intr_pins___intr5___lsb 20 +#define reg_gio_rw_intr_pins___intr5___width 4 +#define reg_gio_rw_intr_pins___intr6___lsb 24 +#define reg_gio_rw_intr_pins___intr6___width 4 +#define reg_gio_rw_intr_pins___intr7___lsb 28 +#define reg_gio_rw_intr_pins___intr7___width 4 +#define reg_gio_rw_intr_pins_offset 124 + +/* Register rw_intr_mask, scope gio, type rw */ +#define reg_gio_rw_intr_mask___intr0___lsb 0 +#define reg_gio_rw_intr_mask___intr0___width 1 +#define reg_gio_rw_intr_mask___intr0___bit 0 +#define reg_gio_rw_intr_mask___intr1___lsb 1 +#define reg_gio_rw_intr_mask___intr1___width 1 +#define reg_gio_rw_intr_mask___intr1___bit 1 +#define reg_gio_rw_intr_mask___intr2___lsb 2 +#define reg_gio_rw_intr_mask___intr2___width 1 +#define reg_gio_rw_intr_mask___intr2___bit 2 +#define reg_gio_rw_intr_mask___intr3___lsb 3 +#define reg_gio_rw_intr_mask___intr3___width 1 +#define reg_gio_rw_intr_mask___intr3___bit 3 +#define reg_gio_rw_intr_mask___intr4___lsb 4 +#define reg_gio_rw_intr_mask___intr4___width 1 +#define reg_gio_rw_intr_mask___intr4___bit 4 +#define reg_gio_rw_intr_mask___intr5___lsb 5 +#define reg_gio_rw_intr_mask___intr5___width 1 +#define reg_gio_rw_intr_mask___intr5___bit 5 +#define reg_gio_rw_intr_mask___intr6___lsb 6 +#define reg_gio_rw_intr_mask___intr6___width 1 +#define reg_gio_rw_intr_mask___intr6___bit 6 +#define reg_gio_rw_intr_mask___intr7___lsb 7 +#define reg_gio_rw_intr_mask___intr7___width 1 +#define reg_gio_rw_intr_mask___intr7___bit 7 +#define reg_gio_rw_intr_mask___i2c0_done___lsb 8 +#define reg_gio_rw_intr_mask___i2c0_done___width 1 +#define reg_gio_rw_intr_mask___i2c0_done___bit 8 +#define reg_gio_rw_intr_mask___i2c1_done___lsb 9 +#define reg_gio_rw_intr_mask___i2c1_done___width 1 +#define reg_gio_rw_intr_mask___i2c1_done___bit 9 +#define reg_gio_rw_intr_mask_offset 128 + +/* Register rw_ack_intr, scope gio, type rw */ +#define reg_gio_rw_ack_intr___intr0___lsb 0 +#define reg_gio_rw_ack_intr___intr0___width 1 +#define reg_gio_rw_ack_intr___intr0___bit 0 +#define reg_gio_rw_ack_intr___intr1___lsb 1 +#define reg_gio_rw_ack_intr___intr1___width 1 +#define reg_gio_rw_ack_intr___intr1___bit 1 +#define reg_gio_rw_ack_intr___intr2___lsb 2 +#define reg_gio_rw_ack_intr___intr2___width 1 +#define reg_gio_rw_ack_intr___intr2___bit 2 +#define reg_gio_rw_ack_intr___intr3___lsb 3 +#define reg_gio_rw_ack_intr___intr3___width 1 +#define reg_gio_rw_ack_intr___intr3___bit 3 +#define reg_gio_rw_ack_intr___intr4___lsb 4 +#define reg_gio_rw_ack_intr___intr4___width 1 +#define reg_gio_rw_ack_intr___intr4___bit 4 +#define reg_gio_rw_ack_intr___intr5___lsb 5 +#define reg_gio_rw_ack_intr___intr5___width 1 +#define reg_gio_rw_ack_intr___intr5___bit 5 +#define reg_gio_rw_ack_intr___intr6___lsb 6 +#define reg_gio_rw_ack_intr___intr6___width 1 +#define reg_gio_rw_ack_intr___intr6___bit 6 +#define reg_gio_rw_ack_intr___intr7___lsb 7 +#define reg_gio_rw_ack_intr___intr7___width 1 +#define reg_gio_rw_ack_intr___intr7___bit 7 +#define reg_gio_rw_ack_intr___i2c0_done___lsb 8 +#define reg_gio_rw_ack_intr___i2c0_done___width 1 +#define reg_gio_rw_ack_intr___i2c0_done___bit 8 +#define reg_gio_rw_ack_intr___i2c1_done___lsb 9 +#define reg_gio_rw_ack_intr___i2c1_done___width 1 +#define reg_gio_rw_ack_intr___i2c1_done___bit 9 +#define reg_gio_rw_ack_intr_offset 132 + +/* Register r_intr, scope gio, type r */ +#define reg_gio_r_intr___intr0___lsb 0 +#define reg_gio_r_intr___intr0___width 1 +#define reg_gio_r_intr___intr0___bit 0 +#define reg_gio_r_intr___intr1___lsb 1 +#define reg_gio_r_intr___intr1___width 1 +#define reg_gio_r_intr___intr1___bit 1 +#define reg_gio_r_intr___intr2___lsb 2 +#define reg_gio_r_intr___intr2___width 1 +#define reg_gio_r_intr___intr2___bit 2 +#define reg_gio_r_intr___intr3___lsb 3 +#define reg_gio_r_intr___intr3___width 1 +#define reg_gio_r_intr___intr3___bit 3 +#define reg_gio_r_intr___intr4___lsb 4 +#define reg_gio_r_intr___intr4___width 1 +#define reg_gio_r_intr___intr4___bit 4 +#define reg_gio_r_intr___intr5___lsb 5 +#define reg_gio_r_intr___intr5___width 1 +#define reg_gio_r_intr___intr5___bit 5 +#define reg_gio_r_intr___intr6___lsb 6 +#define reg_gio_r_intr___intr6___width 1 +#define reg_gio_r_intr___intr6___bit 6 +#define reg_gio_r_intr___intr7___lsb 7 +#define reg_gio_r_intr___intr7___width 1 +#define reg_gio_r_intr___intr7___bit 7 +#define reg_gio_r_intr___i2c0_done___lsb 8 +#define reg_gio_r_intr___i2c0_done___width 1 +#define reg_gio_r_intr___i2c0_done___bit 8 +#define reg_gio_r_intr___i2c1_done___lsb 9 +#define reg_gio_r_intr___i2c1_done___width 1 +#define reg_gio_r_intr___i2c1_done___bit 9 +#define reg_gio_r_intr_offset 136 + +/* Register r_masked_intr, scope gio, type r */ +#define reg_gio_r_masked_intr___intr0___lsb 0 +#define reg_gio_r_masked_intr___intr0___width 1 +#define reg_gio_r_masked_intr___intr0___bit 0 +#define reg_gio_r_masked_intr___intr1___lsb 1 +#define reg_gio_r_masked_intr___intr1___width 1 +#define reg_gio_r_masked_intr___intr1___bit 1 +#define reg_gio_r_masked_intr___intr2___lsb 2 +#define reg_gio_r_masked_intr___intr2___width 1 +#define reg_gio_r_masked_intr___intr2___bit 2 +#define reg_gio_r_masked_intr___intr3___lsb 3 +#define reg_gio_r_masked_intr___intr3___width 1 +#define reg_gio_r_masked_intr___intr3___bit 3 +#define reg_gio_r_masked_intr___intr4___lsb 4 +#define reg_gio_r_masked_intr___intr4___width 1 +#define reg_gio_r_masked_intr___intr4___bit 4 +#define reg_gio_r_masked_intr___intr5___lsb 5 +#define reg_gio_r_masked_intr___intr5___width 1 +#define reg_gio_r_masked_intr___intr5___bit 5 +#define reg_gio_r_masked_intr___intr6___lsb 6 +#define reg_gio_r_masked_intr___intr6___width 1 +#define reg_gio_r_masked_intr___intr6___bit 6 +#define reg_gio_r_masked_intr___intr7___lsb 7 +#define reg_gio_r_masked_intr___intr7___width 1 +#define reg_gio_r_masked_intr___intr7___bit 7 +#define reg_gio_r_masked_intr___i2c0_done___lsb 8 +#define reg_gio_r_masked_intr___i2c0_done___width 1 +#define reg_gio_r_masked_intr___i2c0_done___bit 8 +#define reg_gio_r_masked_intr___i2c1_done___lsb 9 +#define reg_gio_r_masked_intr___i2c1_done___width 1 +#define reg_gio_r_masked_intr___i2c1_done___bit 9 +#define reg_gio_r_masked_intr_offset 140 + +/* Register rw_i2c0_start, scope gio, type rw */ +#define reg_gio_rw_i2c0_start___run___lsb 0 +#define reg_gio_rw_i2c0_start___run___width 1 +#define reg_gio_rw_i2c0_start___run___bit 0 +#define reg_gio_rw_i2c0_start_offset 144 + +/* Register rw_i2c0_cfg, scope gio, type rw */ +#define reg_gio_rw_i2c0_cfg___en___lsb 0 +#define reg_gio_rw_i2c0_cfg___en___width 1 +#define reg_gio_rw_i2c0_cfg___en___bit 0 +#define reg_gio_rw_i2c0_cfg___bit_order___lsb 1 +#define reg_gio_rw_i2c0_cfg___bit_order___width 1 +#define reg_gio_rw_i2c0_cfg___bit_order___bit 1 +#define reg_gio_rw_i2c0_cfg___scl_io___lsb 2 +#define reg_gio_rw_i2c0_cfg___scl_io___width 1 +#define reg_gio_rw_i2c0_cfg___scl_io___bit 2 +#define reg_gio_rw_i2c0_cfg___scl_inv___lsb 3 +#define reg_gio_rw_i2c0_cfg___scl_inv___width 1 +#define reg_gio_rw_i2c0_cfg___scl_inv___bit 3 +#define reg_gio_rw_i2c0_cfg___sda_io___lsb 4 +#define reg_gio_rw_i2c0_cfg___sda_io___width 1 +#define reg_gio_rw_i2c0_cfg___sda_io___bit 4 +#define reg_gio_rw_i2c0_cfg___sda_idle___lsb 5 +#define reg_gio_rw_i2c0_cfg___sda_idle___width 1 +#define reg_gio_rw_i2c0_cfg___sda_idle___bit 5 +#define reg_gio_rw_i2c0_cfg_offset 148 + +/* Register rw_i2c0_ctrl, scope gio, type rw */ +#define reg_gio_rw_i2c0_ctrl___trf_bits___lsb 0 +#define reg_gio_rw_i2c0_ctrl___trf_bits___width 6 +#define reg_gio_rw_i2c0_ctrl___switch_dir___lsb 6 +#define reg_gio_rw_i2c0_ctrl___switch_dir___width 6 +#define reg_gio_rw_i2c0_ctrl___extra_start___lsb 12 +#define reg_gio_rw_i2c0_ctrl___extra_start___width 3 +#define reg_gio_rw_i2c0_ctrl___early_end___lsb 15 +#define reg_gio_rw_i2c0_ctrl___early_end___width 1 +#define reg_gio_rw_i2c0_ctrl___early_end___bit 15 +#define reg_gio_rw_i2c0_ctrl___start_stop___lsb 16 +#define reg_gio_rw_i2c0_ctrl___start_stop___width 1 +#define reg_gio_rw_i2c0_ctrl___start_stop___bit 16 +#define reg_gio_rw_i2c0_ctrl___ack_dir0___lsb 17 +#define reg_gio_rw_i2c0_ctrl___ack_dir0___width 1 +#define reg_gio_rw_i2c0_ctrl___ack_dir0___bit 17 +#define reg_gio_rw_i2c0_ctrl___ack_dir1___lsb 18 +#define reg_gio_rw_i2c0_ctrl___ack_dir1___width 1 +#define reg_gio_rw_i2c0_ctrl___ack_dir1___bit 18 +#define reg_gio_rw_i2c0_ctrl___ack_dir2___lsb 19 +#define reg_gio_rw_i2c0_ctrl___ack_dir2___width 1 +#define reg_gio_rw_i2c0_ctrl___ack_dir2___bit 19 +#define reg_gio_rw_i2c0_ctrl___ack_dir3___lsb 20 +#define reg_gio_rw_i2c0_ctrl___ack_dir3___width 1 +#define reg_gio_rw_i2c0_ctrl___ack_dir3___bit 20 +#define reg_gio_rw_i2c0_ctrl___ack_dir4___lsb 21 +#define reg_gio_rw_i2c0_ctrl___ack_dir4___width 1 +#define reg_gio_rw_i2c0_ctrl___ack_dir4___bit 21 +#define reg_gio_rw_i2c0_ctrl___ack_dir5___lsb 22 +#define reg_gio_rw_i2c0_ctrl___ack_dir5___width 1 +#define reg_gio_rw_i2c0_ctrl___ack_dir5___bit 22 +#define reg_gio_rw_i2c0_ctrl___ack_bit___lsb 23 +#define reg_gio_rw_i2c0_ctrl___ack_bit___width 1 +#define reg_gio_rw_i2c0_ctrl___ack_bit___bit 23 +#define reg_gio_rw_i2c0_ctrl___start_bit___lsb 24 +#define reg_gio_rw_i2c0_ctrl___start_bit___width 1 +#define reg_gio_rw_i2c0_ctrl___start_bit___bit 24 +#define reg_gio_rw_i2c0_ctrl___freq___lsb 25 +#define reg_gio_rw_i2c0_ctrl___freq___width 2 +#define reg_gio_rw_i2c0_ctrl_offset 152 + +/* Register rw_i2c0_data, scope gio, type rw */ +#define reg_gio_rw_i2c0_data___data0___lsb 0 +#define reg_gio_rw_i2c0_data___data0___width 8 +#define reg_gio_rw_i2c0_data___data1___lsb 8 +#define reg_gio_rw_i2c0_data___data1___width 8 +#define reg_gio_rw_i2c0_data___data2___lsb 16 +#define reg_gio_rw_i2c0_data___data2___width 8 +#define reg_gio_rw_i2c0_data___data3___lsb 24 +#define reg_gio_rw_i2c0_data___data3___width 8 +#define reg_gio_rw_i2c0_data_offset 156 + +/* Register rw_i2c0_data2, scope gio, type rw */ +#define reg_gio_rw_i2c0_data2___data4___lsb 0 +#define reg_gio_rw_i2c0_data2___data4___width 8 +#define reg_gio_rw_i2c0_data2___data5___lsb 8 +#define reg_gio_rw_i2c0_data2___data5___width 8 +#define reg_gio_rw_i2c0_data2___start_val___lsb 16 +#define reg_gio_rw_i2c0_data2___start_val___width 6 +#define reg_gio_rw_i2c0_data2___ack_val___lsb 22 +#define reg_gio_rw_i2c0_data2___ack_val___width 6 +#define reg_gio_rw_i2c0_data2_offset 160 + +/* Register rw_i2c1_start, scope gio, type rw */ +#define reg_gio_rw_i2c1_start___run___lsb 0 +#define reg_gio_rw_i2c1_start___run___width 1 +#define reg_gio_rw_i2c1_start___run___bit 0 +#define reg_gio_rw_i2c1_start_offset 164 + +/* Register rw_i2c1_cfg, scope gio, type rw */ +#define reg_gio_rw_i2c1_cfg___en___lsb 0 +#define reg_gio_rw_i2c1_cfg___en___width 1 +#define reg_gio_rw_i2c1_cfg___en___bit 0 +#define reg_gio_rw_i2c1_cfg___bit_order___lsb 1 +#define reg_gio_rw_i2c1_cfg___bit_order___width 1 +#define reg_gio_rw_i2c1_cfg___bit_order___bit 1 +#define reg_gio_rw_i2c1_cfg___scl_io___lsb 2 +#define reg_gio_rw_i2c1_cfg___scl_io___width 1 +#define reg_gio_rw_i2c1_cfg___scl_io___bit 2 +#define reg_gio_rw_i2c1_cfg___scl_inv___lsb 3 +#define reg_gio_rw_i2c1_cfg___scl_inv___width 1 +#define reg_gio_rw_i2c1_cfg___scl_inv___bit 3 +#define reg_gio_rw_i2c1_cfg___sda0_io___lsb 4 +#define reg_gio_rw_i2c1_cfg___sda0_io___width 1 +#define reg_gio_rw_i2c1_cfg___sda0_io___bit 4 +#define reg_gio_rw_i2c1_cfg___sda0_idle___lsb 5 +#define reg_gio_rw_i2c1_cfg___sda0_idle___width 1 +#define reg_gio_rw_i2c1_cfg___sda0_idle___bit 5 +#define reg_gio_rw_i2c1_cfg___sda1_io___lsb 6 +#define reg_gio_rw_i2c1_cfg___sda1_io___width 1 +#define reg_gio_rw_i2c1_cfg___sda1_io___bit 6 +#define reg_gio_rw_i2c1_cfg___sda1_idle___lsb 7 +#define reg_gio_rw_i2c1_cfg___sda1_idle___width 1 +#define reg_gio_rw_i2c1_cfg___sda1_idle___bit 7 +#define reg_gio_rw_i2c1_cfg___sda2_io___lsb 8 +#define reg_gio_rw_i2c1_cfg___sda2_io___width 1 +#define reg_gio_rw_i2c1_cfg___sda2_io___bit 8 +#define reg_gio_rw_i2c1_cfg___sda2_idle___lsb 9 +#define reg_gio_rw_i2c1_cfg___sda2_idle___width 1 +#define reg_gio_rw_i2c1_cfg___sda2_idle___bit 9 +#define reg_gio_rw_i2c1_cfg___sda3_io___lsb 10 +#define reg_gio_rw_i2c1_cfg___sda3_io___width 1 +#define reg_gio_rw_i2c1_cfg___sda3_io___bit 10 +#define reg_gio_rw_i2c1_cfg___sda3_idle___lsb 11 +#define reg_gio_rw_i2c1_cfg___sda3_idle___width 1 +#define reg_gio_rw_i2c1_cfg___sda3_idle___bit 11 +#define reg_gio_rw_i2c1_cfg___sda_sel___lsb 12 +#define reg_gio_rw_i2c1_cfg___sda_sel___width 2 +#define reg_gio_rw_i2c1_cfg___sen_idle___lsb 14 +#define reg_gio_rw_i2c1_cfg___sen_idle___width 1 +#define reg_gio_rw_i2c1_cfg___sen_idle___bit 14 +#define reg_gio_rw_i2c1_cfg___sen_inv___lsb 15 +#define reg_gio_rw_i2c1_cfg___sen_inv___width 1 +#define reg_gio_rw_i2c1_cfg___sen_inv___bit 15 +#define reg_gio_rw_i2c1_cfg___sen_sel___lsb 16 +#define reg_gio_rw_i2c1_cfg___sen_sel___width 2 +#define reg_gio_rw_i2c1_cfg_offset 168 + +/* Register rw_i2c1_ctrl, scope gio, type rw */ +#define reg_gio_rw_i2c1_ctrl___trf_bits___lsb 0 +#define reg_gio_rw_i2c1_ctrl___trf_bits___width 6 +#define reg_gio_rw_i2c1_ctrl___switch_dir___lsb 6 +#define reg_gio_rw_i2c1_ctrl___switch_dir___width 6 +#define reg_gio_rw_i2c1_ctrl___extra_start___lsb 12 +#define reg_gio_rw_i2c1_ctrl___extra_start___width 3 +#define reg_gio_rw_i2c1_ctrl___early_end___lsb 15 +#define reg_gio_rw_i2c1_ctrl___early_end___width 1 +#define reg_gio_rw_i2c1_ctrl___early_end___bit 15 +#define reg_gio_rw_i2c1_ctrl___start_stop___lsb 16 +#define reg_gio_rw_i2c1_ctrl___start_stop___width 1 +#define reg_gio_rw_i2c1_ctrl___start_stop___bit 16 +#define reg_gio_rw_i2c1_ctrl___ack_dir0___lsb 17 +#define reg_gio_rw_i2c1_ctrl___ack_dir0___width 1 +#define reg_gio_rw_i2c1_ctrl___ack_dir0___bit 17 +#define reg_gio_rw_i2c1_ctrl___ack_dir1___lsb 18 +#define reg_gio_rw_i2c1_ctrl___ack_dir1___width 1 +#define reg_gio_rw_i2c1_ctrl___ack_dir1___bit 18 +#define reg_gio_rw_i2c1_ctrl___ack_dir2___lsb 19 +#define reg_gio_rw_i2c1_ctrl___ack_dir2___width 1 +#define reg_gio_rw_i2c1_ctrl___ack_dir2___bit 19 +#define reg_gio_rw_i2c1_ctrl___ack_dir3___lsb 20 +#define reg_gio_rw_i2c1_ctrl___ack_dir3___width 1 +#define reg_gio_rw_i2c1_ctrl___ack_dir3___bit 20 +#define reg_gio_rw_i2c1_ctrl___ack_dir4___lsb 21 +#define reg_gio_rw_i2c1_ctrl___ack_dir4___width 1 +#define reg_gio_rw_i2c1_ctrl___ack_dir4___bit 21 +#define reg_gio_rw_i2c1_ctrl___ack_dir5___lsb 22 +#define reg_gio_rw_i2c1_ctrl___ack_dir5___width 1 +#define reg_gio_rw_i2c1_ctrl___ack_dir5___bit 22 +#define reg_gio_rw_i2c1_ctrl___ack_bit___lsb 23 +#define reg_gio_rw_i2c1_ctrl___ack_bit___width 1 +#define reg_gio_rw_i2c1_ctrl___ack_bit___bit 23 +#define reg_gio_rw_i2c1_ctrl___start_bit___lsb 24 +#define reg_gio_rw_i2c1_ctrl___start_bit___width 1 +#define reg_gio_rw_i2c1_ctrl___start_bit___bit 24 +#define reg_gio_rw_i2c1_ctrl___freq___lsb 25 +#define reg_gio_rw_i2c1_ctrl___freq___width 2 +#define reg_gio_rw_i2c1_ctrl_offset 172 + +/* Register rw_i2c1_data, scope gio, type rw */ +#define reg_gio_rw_i2c1_data___data0___lsb 0 +#define reg_gio_rw_i2c1_data___data0___width 8 +#define reg_gio_rw_i2c1_data___data1___lsb 8 +#define reg_gio_rw_i2c1_data___data1___width 8 +#define reg_gio_rw_i2c1_data___data2___lsb 16 +#define reg_gio_rw_i2c1_data___data2___width 8 +#define reg_gio_rw_i2c1_data___data3___lsb 24 +#define reg_gio_rw_i2c1_data___data3___width 8 +#define reg_gio_rw_i2c1_data_offset 176 + +/* Register rw_i2c1_data2, scope gio, type rw */ +#define reg_gio_rw_i2c1_data2___data4___lsb 0 +#define reg_gio_rw_i2c1_data2___data4___width 8 +#define reg_gio_rw_i2c1_data2___data5___lsb 8 +#define reg_gio_rw_i2c1_data2___data5___width 8 +#define reg_gio_rw_i2c1_data2___start_val___lsb 16 +#define reg_gio_rw_i2c1_data2___start_val___width 6 +#define reg_gio_rw_i2c1_data2___ack_val___lsb 22 +#define reg_gio_rw_i2c1_data2___ack_val___width 6 +#define reg_gio_rw_i2c1_data2_offset 180 + +/* Register r_ppwm_stat, scope gio, type r */ +#define reg_gio_r_ppwm_stat___freq___lsb 0 +#define reg_gio_r_ppwm_stat___freq___width 2 +#define reg_gio_r_ppwm_stat_offset 184 + +/* Register rw_ppwm_data, scope gio, type rw */ +#define reg_gio_rw_ppwm_data___data___lsb 0 +#define reg_gio_rw_ppwm_data___data___width 8 +#define reg_gio_rw_ppwm_data_offset 188 + +/* Register rw_pwm0_ctrl, scope gio, type rw */ +#define reg_gio_rw_pwm0_ctrl___mode___lsb 0 +#define reg_gio_rw_pwm0_ctrl___mode___width 2 +#define reg_gio_rw_pwm0_ctrl___ccd_override___lsb 2 +#define reg_gio_rw_pwm0_ctrl___ccd_override___width 1 +#define reg_gio_rw_pwm0_ctrl___ccd_override___bit 2 +#define reg_gio_rw_pwm0_ctrl___ccd_val___lsb 3 +#define reg_gio_rw_pwm0_ctrl___ccd_val___width 1 +#define reg_gio_rw_pwm0_ctrl___ccd_val___bit 3 +#define reg_gio_rw_pwm0_ctrl_offset 192 + +/* Register rw_pwm0_var, scope gio, type rw */ +#define reg_gio_rw_pwm0_var___lo___lsb 0 +#define reg_gio_rw_pwm0_var___lo___width 13 +#define reg_gio_rw_pwm0_var___hi___lsb 13 +#define reg_gio_rw_pwm0_var___hi___width 13 +#define reg_gio_rw_pwm0_var_offset 196 + +/* Register rw_pwm0_data, scope gio, type rw */ +#define reg_gio_rw_pwm0_data___data___lsb 0 +#define reg_gio_rw_pwm0_data___data___width 8 +#define reg_gio_rw_pwm0_data_offset 200 + +/* Register rw_pwm1_ctrl, scope gio, type rw */ +#define reg_gio_rw_pwm1_ctrl___mode___lsb 0 +#define reg_gio_rw_pwm1_ctrl___mode___width 2 +#define reg_gio_rw_pwm1_ctrl___ccd_override___lsb 2 +#define reg_gio_rw_pwm1_ctrl___ccd_override___width 1 +#define reg_gio_rw_pwm1_ctrl___ccd_override___bit 2 +#define reg_gio_rw_pwm1_ctrl___ccd_val___lsb 3 +#define reg_gio_rw_pwm1_ctrl___ccd_val___width 1 +#define reg_gio_rw_pwm1_ctrl___ccd_val___bit 3 +#define reg_gio_rw_pwm1_ctrl_offset 204 + +/* Register rw_pwm1_var, scope gio, type rw */ +#define reg_gio_rw_pwm1_var___lo___lsb 0 +#define reg_gio_rw_pwm1_var___lo___width 13 +#define reg_gio_rw_pwm1_var___hi___lsb 13 +#define reg_gio_rw_pwm1_var___hi___width 13 +#define reg_gio_rw_pwm1_var_offset 208 + +/* Register rw_pwm1_data, scope gio, type rw */ +#define reg_gio_rw_pwm1_data___data___lsb 0 +#define reg_gio_rw_pwm1_data___data___width 8 +#define reg_gio_rw_pwm1_data_offset 212 + +/* Register rw_pwm2_ctrl, scope gio, type rw */ +#define reg_gio_rw_pwm2_ctrl___mode___lsb 0 +#define reg_gio_rw_pwm2_ctrl___mode___width 2 +#define reg_gio_rw_pwm2_ctrl___ccd_override___lsb 2 +#define reg_gio_rw_pwm2_ctrl___ccd_override___width 1 +#define reg_gio_rw_pwm2_ctrl___ccd_override___bit 2 +#define reg_gio_rw_pwm2_ctrl___ccd_val___lsb 3 +#define reg_gio_rw_pwm2_ctrl___ccd_val___width 1 +#define reg_gio_rw_pwm2_ctrl___ccd_val___bit 3 +#define reg_gio_rw_pwm2_ctrl_offset 216 + +/* Register rw_pwm2_var, scope gio, type rw */ +#define reg_gio_rw_pwm2_var___lo___lsb 0 +#define reg_gio_rw_pwm2_var___lo___width 13 +#define reg_gio_rw_pwm2_var___hi___lsb 13 +#define reg_gio_rw_pwm2_var___hi___width 13 +#define reg_gio_rw_pwm2_var_offset 220 + +/* Register rw_pwm2_data, scope gio, type rw */ +#define reg_gio_rw_pwm2_data___data___lsb 0 +#define reg_gio_rw_pwm2_data___data___width 8 +#define reg_gio_rw_pwm2_data_offset 224 + +/* Register rw_pwm_in_cfg, scope gio, type rw */ +#define reg_gio_rw_pwm_in_cfg___pin___lsb 0 +#define reg_gio_rw_pwm_in_cfg___pin___width 3 +#define reg_gio_rw_pwm_in_cfg_offset 228 + +/* Register r_pwm_in_lo, scope gio, type r */ +#define reg_gio_r_pwm_in_lo___data___lsb 0 +#define reg_gio_r_pwm_in_lo___data___width 32 +#define reg_gio_r_pwm_in_lo_offset 232 + +/* Register r_pwm_in_hi, scope gio, type r */ +#define reg_gio_r_pwm_in_hi___data___lsb 0 +#define reg_gio_r_pwm_in_hi___data___width 32 +#define reg_gio_r_pwm_in_hi_offset 236 + +/* Register r_pwm_in_cnt, scope gio, type r */ +#define reg_gio_r_pwm_in_cnt___data___lsb 0 +#define reg_gio_r_pwm_in_cnt___data___width 32 +#define reg_gio_r_pwm_in_cnt_offset 240 + + +/* Constants */ +#define regk_gio_anyedge 0x00000007 +#define regk_gio_f100k 0x00000000 +#define regk_gio_f1562 0x00000000 +#define regk_gio_f195 0x00000003 +#define regk_gio_f1m 0x00000002 +#define regk_gio_f390 0x00000002 +#define regk_gio_f400k 0x00000001 +#define regk_gio_f5m 0x00000003 +#define regk_gio_f781 0x00000001 +#define regk_gio_hi 0x00000001 +#define regk_gio_in 0x00000000 +#define regk_gio_intr_pa0 0x00000000 +#define regk_gio_intr_pa1 0x00000000 +#define regk_gio_intr_pa10 0x00000001 +#define regk_gio_intr_pa11 0x00000001 +#define regk_gio_intr_pa12 0x00000001 +#define regk_gio_intr_pa13 0x00000001 +#define regk_gio_intr_pa14 0x00000001 +#define regk_gio_intr_pa15 0x00000001 +#define regk_gio_intr_pa16 0x00000002 +#define regk_gio_intr_pa17 0x00000002 +#define regk_gio_intr_pa18 0x00000002 +#define regk_gio_intr_pa19 0x00000002 +#define regk_gio_intr_pa2 0x00000000 +#define regk_gio_intr_pa20 0x00000002 +#define regk_gio_intr_pa21 0x00000002 +#define regk_gio_intr_pa22 0x00000002 +#define regk_gio_intr_pa23 0x00000002 +#define regk_gio_intr_pa24 0x00000003 +#define regk_gio_intr_pa25 0x00000003 +#define regk_gio_intr_pa26 0x00000003 +#define regk_gio_intr_pa27 0x00000003 +#define regk_gio_intr_pa28 0x00000003 +#define regk_gio_intr_pa29 0x00000003 +#define regk_gio_intr_pa3 0x00000000 +#define regk_gio_intr_pa30 0x00000003 +#define regk_gio_intr_pa31 0x00000003 +#define regk_gio_intr_pa4 0x00000000 +#define regk_gio_intr_pa5 0x00000000 +#define regk_gio_intr_pa6 0x00000000 +#define regk_gio_intr_pa7 0x00000000 +#define regk_gio_intr_pa8 0x00000001 +#define regk_gio_intr_pa9 0x00000001 +#define regk_gio_intr_pb0 0x00000004 +#define regk_gio_intr_pb1 0x00000004 +#define regk_gio_intr_pb10 0x00000005 +#define regk_gio_intr_pb11 0x00000005 +#define regk_gio_intr_pb12 0x00000005 +#define regk_gio_intr_pb13 0x00000005 +#define regk_gio_intr_pb14 0x00000005 +#define regk_gio_intr_pb15 0x00000005 +#define regk_gio_intr_pb16 0x00000006 +#define regk_gio_intr_pb17 0x00000006 +#define regk_gio_intr_pb18 0x00000006 +#define regk_gio_intr_pb19 0x00000006 +#define regk_gio_intr_pb2 0x00000004 +#define regk_gio_intr_pb20 0x00000006 +#define regk_gio_intr_pb21 0x00000006 +#define regk_gio_intr_pb22 0x00000006 +#define regk_gio_intr_pb23 0x00000006 +#define regk_gio_intr_pb24 0x00000007 +#define regk_gio_intr_pb25 0x00000007 +#define regk_gio_intr_pb26 0x00000007 +#define regk_gio_intr_pb27 0x00000007 +#define regk_gio_intr_pb28 0x00000007 +#define regk_gio_intr_pb29 0x00000007 +#define regk_gio_intr_pb3 0x00000004 +#define regk_gio_intr_pb30 0x00000007 +#define regk_gio_intr_pb31 0x00000007 +#define regk_gio_intr_pb4 0x00000004 +#define regk_gio_intr_pb5 0x00000004 +#define regk_gio_intr_pb6 0x00000004 +#define regk_gio_intr_pb7 0x00000004 +#define regk_gio_intr_pb8 0x00000005 +#define regk_gio_intr_pb9 0x00000005 +#define regk_gio_intr_pc0 0x00000008 +#define regk_gio_intr_pc1 0x00000008 +#define regk_gio_intr_pc10 0x00000009 +#define regk_gio_intr_pc11 0x00000009 +#define regk_gio_intr_pc12 0x00000009 +#define regk_gio_intr_pc13 0x00000009 +#define regk_gio_intr_pc14 0x00000009 +#define regk_gio_intr_pc15 0x00000009 +#define regk_gio_intr_pc2 0x00000008 +#define regk_gio_intr_pc3 0x00000008 +#define regk_gio_intr_pc4 0x00000008 +#define regk_gio_intr_pc5 0x00000008 +#define regk_gio_intr_pc6 0x00000008 +#define regk_gio_intr_pc7 0x00000008 +#define regk_gio_intr_pc8 0x00000009 +#define regk_gio_intr_pc9 0x00000009 +#define regk_gio_intr_pd0 0x0000000c +#define regk_gio_intr_pd1 0x0000000c +#define regk_gio_intr_pd10 0x0000000d +#define regk_gio_intr_pd11 0x0000000d +#define regk_gio_intr_pd12 0x0000000d +#define regk_gio_intr_pd13 0x0000000d +#define regk_gio_intr_pd14 0x0000000d +#define regk_gio_intr_pd15 0x0000000d +#define regk_gio_intr_pd16 0x0000000e +#define regk_gio_intr_pd17 0x0000000e +#define regk_gio_intr_pd18 0x0000000e +#define regk_gio_intr_pd19 0x0000000e +#define regk_gio_intr_pd2 0x0000000c +#define regk_gio_intr_pd20 0x0000000e +#define regk_gio_intr_pd21 0x0000000e +#define regk_gio_intr_pd22 0x0000000e +#define regk_gio_intr_pd23 0x0000000e +#define regk_gio_intr_pd24 0x0000000f +#define regk_gio_intr_pd25 0x0000000f +#define regk_gio_intr_pd26 0x0000000f +#define regk_gio_intr_pd27 0x0000000f +#define regk_gio_intr_pd28 0x0000000f +#define regk_gio_intr_pd29 0x0000000f +#define regk_gio_intr_pd3 0x0000000c +#define regk_gio_intr_pd30 0x0000000f +#define regk_gio_intr_pd31 0x0000000f +#define regk_gio_intr_pd4 0x0000000c +#define regk_gio_intr_pd5 0x0000000c +#define regk_gio_intr_pd6 0x0000000c +#define regk_gio_intr_pd7 0x0000000c +#define regk_gio_intr_pd8 0x0000000d +#define regk_gio_intr_pd9 0x0000000d +#define regk_gio_lo 0x00000002 +#define regk_gio_lsb 0x00000000 +#define regk_gio_msb 0x00000001 +#define regk_gio_negedge 0x00000006 +#define regk_gio_no 0x00000000 +#define regk_gio_no_switch 0x0000003f +#define regk_gio_none 0x00000007 +#define regk_gio_off 0x00000000 +#define regk_gio_opendrain 0x00000000 +#define regk_gio_out 0x00000001 +#define regk_gio_posedge 0x00000005 +#define regk_gio_pwm_hfp 0x00000002 +#define regk_gio_pwm_pa0 0x00000001 +#define regk_gio_pwm_pa19 0x00000004 +#define regk_gio_pwm_pa6 0x00000002 +#define regk_gio_pwm_pa7 0x00000003 +#define regk_gio_pwm_pb26 0x00000005 +#define regk_gio_pwm_pd23 0x00000006 +#define regk_gio_pwm_pd31 0x00000007 +#define regk_gio_pwm_std 0x00000001 +#define regk_gio_pwm_var 0x00000003 +#define regk_gio_rw_i2c0_cfg_default 0x00000020 +#define regk_gio_rw_i2c0_ctrl_default 0x00010000 +#define regk_gio_rw_i2c0_start_default 0x00000000 +#define regk_gio_rw_i2c1_cfg_default 0x00000aa0 +#define regk_gio_rw_i2c1_ctrl_default 0x00010000 +#define regk_gio_rw_i2c1_start_default 0x00000000 +#define regk_gio_rw_intr_cfg_default 0x00000000 +#define regk_gio_rw_intr_mask_default 0x00000000 +#define regk_gio_rw_pa_oe_default 0x00000000 +#define regk_gio_rw_pb_oe_default 0x00000000 +#define regk_gio_rw_pc_oe_default 0x00000000 +#define regk_gio_rw_ppwm_data_default 0x00000000 +#define regk_gio_rw_pwm0_ctrl_default 0x00000000 +#define regk_gio_rw_pwm1_ctrl_default 0x00000000 +#define regk_gio_rw_pwm2_ctrl_default 0x00000000 +#define regk_gio_rw_pwm_in_cfg_default 0x00000000 +#define regk_gio_sda0 0x00000000 +#define regk_gio_sda1 0x00000001 +#define regk_gio_sda2 0x00000002 +#define regk_gio_sda3 0x00000003 +#define regk_gio_sen 0x00000000 +#define regk_gio_set 0x00000003 +#define regk_gio_yes 0x00000001 +#endif /* __gio_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/asm/pinmux_defs_asm.h b/include/asm-cris/arch-v32/mach-a3/hwregs/asm/pinmux_defs_asm.h new file mode 100644 index 000000000000..c3dc9c666c46 --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/asm/pinmux_defs_asm.h @@ -0,0 +1,572 @@ +#ifndef __pinmux_defs_asm_h +#define __pinmux_defs_asm_h + +/* + * This file is autogenerated from + * file: pinmux.r + * + * by ../../../tools/rdesc/bin/rdes2c -asm -outfile pinmux_defs_asm.h pinmux.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_hwprot, scope pinmux, type rw */ +#define reg_pinmux_rw_hwprot___eth___lsb 0 +#define reg_pinmux_rw_hwprot___eth___width 1 +#define reg_pinmux_rw_hwprot___eth___bit 0 +#define reg_pinmux_rw_hwprot___eth_mdio___lsb 1 +#define reg_pinmux_rw_hwprot___eth_mdio___width 1 +#define reg_pinmux_rw_hwprot___eth_mdio___bit 1 +#define reg_pinmux_rw_hwprot___geth___lsb 2 +#define reg_pinmux_rw_hwprot___geth___width 1 +#define reg_pinmux_rw_hwprot___geth___bit 2 +#define reg_pinmux_rw_hwprot___tg___lsb 3 +#define reg_pinmux_rw_hwprot___tg___width 1 +#define reg_pinmux_rw_hwprot___tg___bit 3 +#define reg_pinmux_rw_hwprot___tg_clk___lsb 4 +#define reg_pinmux_rw_hwprot___tg_clk___width 1 +#define reg_pinmux_rw_hwprot___tg_clk___bit 4 +#define reg_pinmux_rw_hwprot___vout___lsb 5 +#define reg_pinmux_rw_hwprot___vout___width 1 +#define reg_pinmux_rw_hwprot___vout___bit 5 +#define reg_pinmux_rw_hwprot___vout_sync___lsb 6 +#define reg_pinmux_rw_hwprot___vout_sync___width 1 +#define reg_pinmux_rw_hwprot___vout_sync___bit 6 +#define reg_pinmux_rw_hwprot___ser1___lsb 7 +#define reg_pinmux_rw_hwprot___ser1___width 1 +#define reg_pinmux_rw_hwprot___ser1___bit 7 +#define reg_pinmux_rw_hwprot___ser2___lsb 8 +#define reg_pinmux_rw_hwprot___ser2___width 1 +#define reg_pinmux_rw_hwprot___ser2___bit 8 +#define reg_pinmux_rw_hwprot___ser3___lsb 9 +#define reg_pinmux_rw_hwprot___ser3___width 1 +#define reg_pinmux_rw_hwprot___ser3___bit 9 +#define reg_pinmux_rw_hwprot___ser4___lsb 10 +#define reg_pinmux_rw_hwprot___ser4___width 1 +#define reg_pinmux_rw_hwprot___ser4___bit 10 +#define reg_pinmux_rw_hwprot___sser___lsb 11 +#define reg_pinmux_rw_hwprot___sser___width 1 +#define reg_pinmux_rw_hwprot___sser___bit 11 +#define reg_pinmux_rw_hwprot___pwm0___lsb 12 +#define reg_pinmux_rw_hwprot___pwm0___width 1 +#define reg_pinmux_rw_hwprot___pwm0___bit 12 +#define reg_pinmux_rw_hwprot___pwm1___lsb 13 +#define reg_pinmux_rw_hwprot___pwm1___width 1 +#define reg_pinmux_rw_hwprot___pwm1___bit 13 +#define reg_pinmux_rw_hwprot___pwm2___lsb 14 +#define reg_pinmux_rw_hwprot___pwm2___width 1 +#define reg_pinmux_rw_hwprot___pwm2___bit 14 +#define reg_pinmux_rw_hwprot___timer0___lsb 15 +#define reg_pinmux_rw_hwprot___timer0___width 1 +#define reg_pinmux_rw_hwprot___timer0___bit 15 +#define reg_pinmux_rw_hwprot___timer1___lsb 16 +#define reg_pinmux_rw_hwprot___timer1___width 1 +#define reg_pinmux_rw_hwprot___timer1___bit 16 +#define reg_pinmux_rw_hwprot___pio___lsb 17 +#define reg_pinmux_rw_hwprot___pio___width 1 +#define reg_pinmux_rw_hwprot___pio___bit 17 +#define reg_pinmux_rw_hwprot___i2c0___lsb 18 +#define reg_pinmux_rw_hwprot___i2c0___width 1 +#define reg_pinmux_rw_hwprot___i2c0___bit 18 +#define reg_pinmux_rw_hwprot___i2c1___lsb 19 +#define reg_pinmux_rw_hwprot___i2c1___width 1 +#define reg_pinmux_rw_hwprot___i2c1___bit 19 +#define reg_pinmux_rw_hwprot___i2c1_sda1___lsb 20 +#define reg_pinmux_rw_hwprot___i2c1_sda1___width 1 +#define reg_pinmux_rw_hwprot___i2c1_sda1___bit 20 +#define reg_pinmux_rw_hwprot___i2c1_sda2___lsb 21 +#define reg_pinmux_rw_hwprot___i2c1_sda2___width 1 +#define reg_pinmux_rw_hwprot___i2c1_sda2___bit 21 +#define reg_pinmux_rw_hwprot___i2c1_sda3___lsb 22 +#define reg_pinmux_rw_hwprot___i2c1_sda3___width 1 +#define reg_pinmux_rw_hwprot___i2c1_sda3___bit 22 +#define reg_pinmux_rw_hwprot___i2c1_sen___lsb 23 +#define reg_pinmux_rw_hwprot___i2c1_sen___width 1 +#define reg_pinmux_rw_hwprot___i2c1_sen___bit 23 +#define reg_pinmux_rw_hwprot_offset 0 + +/* Register rw_gio_pa, scope pinmux, type rw */ +#define reg_pinmux_rw_gio_pa___pa0___lsb 0 +#define reg_pinmux_rw_gio_pa___pa0___width 1 +#define reg_pinmux_rw_gio_pa___pa0___bit 0 +#define reg_pinmux_rw_gio_pa___pa1___lsb 1 +#define reg_pinmux_rw_gio_pa___pa1___width 1 +#define reg_pinmux_rw_gio_pa___pa1___bit 1 +#define reg_pinmux_rw_gio_pa___pa2___lsb 2 +#define reg_pinmux_rw_gio_pa___pa2___width 1 +#define reg_pinmux_rw_gio_pa___pa2___bit 2 +#define reg_pinmux_rw_gio_pa___pa3___lsb 3 +#define reg_pinmux_rw_gio_pa___pa3___width 1 +#define reg_pinmux_rw_gio_pa___pa3___bit 3 +#define reg_pinmux_rw_gio_pa___pa4___lsb 4 +#define reg_pinmux_rw_gio_pa___pa4___width 1 +#define reg_pinmux_rw_gio_pa___pa4___bit 4 +#define reg_pinmux_rw_gio_pa___pa5___lsb 5 +#define reg_pinmux_rw_gio_pa___pa5___width 1 +#define reg_pinmux_rw_gio_pa___pa5___bit 5 +#define reg_pinmux_rw_gio_pa___pa6___lsb 6 +#define reg_pinmux_rw_gio_pa___pa6___width 1 +#define reg_pinmux_rw_gio_pa___pa6___bit 6 +#define reg_pinmux_rw_gio_pa___pa7___lsb 7 +#define reg_pinmux_rw_gio_pa___pa7___width 1 +#define reg_pinmux_rw_gio_pa___pa7___bit 7 +#define reg_pinmux_rw_gio_pa___pa8___lsb 8 +#define reg_pinmux_rw_gio_pa___pa8___width 1 +#define reg_pinmux_rw_gio_pa___pa8___bit 8 +#define reg_pinmux_rw_gio_pa___pa9___lsb 9 +#define reg_pinmux_rw_gio_pa___pa9___width 1 +#define reg_pinmux_rw_gio_pa___pa9___bit 9 +#define reg_pinmux_rw_gio_pa___pa10___lsb 10 +#define reg_pinmux_rw_gio_pa___pa10___width 1 +#define reg_pinmux_rw_gio_pa___pa10___bit 10 +#define reg_pinmux_rw_gio_pa___pa11___lsb 11 +#define reg_pinmux_rw_gio_pa___pa11___width 1 +#define reg_pinmux_rw_gio_pa___pa11___bit 11 +#define reg_pinmux_rw_gio_pa___pa12___lsb 12 +#define reg_pinmux_rw_gio_pa___pa12___width 1 +#define reg_pinmux_rw_gio_pa___pa12___bit 12 +#define reg_pinmux_rw_gio_pa___pa13___lsb 13 +#define reg_pinmux_rw_gio_pa___pa13___width 1 +#define reg_pinmux_rw_gio_pa___pa13___bit 13 +#define reg_pinmux_rw_gio_pa___pa14___lsb 14 +#define reg_pinmux_rw_gio_pa___pa14___width 1 +#define reg_pinmux_rw_gio_pa___pa14___bit 14 +#define reg_pinmux_rw_gio_pa___pa15___lsb 15 +#define reg_pinmux_rw_gio_pa___pa15___width 1 +#define reg_pinmux_rw_gio_pa___pa15___bit 15 +#define reg_pinmux_rw_gio_pa___pa16___lsb 16 +#define reg_pinmux_rw_gio_pa___pa16___width 1 +#define reg_pinmux_rw_gio_pa___pa16___bit 16 +#define reg_pinmux_rw_gio_pa___pa17___lsb 17 +#define reg_pinmux_rw_gio_pa___pa17___width 1 +#define reg_pinmux_rw_gio_pa___pa17___bit 17 +#define reg_pinmux_rw_gio_pa___pa18___lsb 18 +#define reg_pinmux_rw_gio_pa___pa18___width 1 +#define reg_pinmux_rw_gio_pa___pa18___bit 18 +#define reg_pinmux_rw_gio_pa___pa19___lsb 19 +#define reg_pinmux_rw_gio_pa___pa19___width 1 +#define reg_pinmux_rw_gio_pa___pa19___bit 19 +#define reg_pinmux_rw_gio_pa___pa20___lsb 20 +#define reg_pinmux_rw_gio_pa___pa20___width 1 +#define reg_pinmux_rw_gio_pa___pa20___bit 20 +#define reg_pinmux_rw_gio_pa___pa21___lsb 21 +#define reg_pinmux_rw_gio_pa___pa21___width 1 +#define reg_pinmux_rw_gio_pa___pa21___bit 21 +#define reg_pinmux_rw_gio_pa___pa22___lsb 22 +#define reg_pinmux_rw_gio_pa___pa22___width 1 +#define reg_pinmux_rw_gio_pa___pa22___bit 22 +#define reg_pinmux_rw_gio_pa___pa23___lsb 23 +#define reg_pinmux_rw_gio_pa___pa23___width 1 +#define reg_pinmux_rw_gio_pa___pa23___bit 23 +#define reg_pinmux_rw_gio_pa___pa24___lsb 24 +#define reg_pinmux_rw_gio_pa___pa24___width 1 +#define reg_pinmux_rw_gio_pa___pa24___bit 24 +#define reg_pinmux_rw_gio_pa___pa25___lsb 25 +#define reg_pinmux_rw_gio_pa___pa25___width 1 +#define reg_pinmux_rw_gio_pa___pa25___bit 25 +#define reg_pinmux_rw_gio_pa___pa26___lsb 26 +#define reg_pinmux_rw_gio_pa___pa26___width 1 +#define reg_pinmux_rw_gio_pa___pa26___bit 26 +#define reg_pinmux_rw_gio_pa___pa27___lsb 27 +#define reg_pinmux_rw_gio_pa___pa27___width 1 +#define reg_pinmux_rw_gio_pa___pa27___bit 27 +#define reg_pinmux_rw_gio_pa___pa28___lsb 28 +#define reg_pinmux_rw_gio_pa___pa28___width 1 +#define reg_pinmux_rw_gio_pa___pa28___bit 28 +#define reg_pinmux_rw_gio_pa___pa29___lsb 29 +#define reg_pinmux_rw_gio_pa___pa29___width 1 +#define reg_pinmux_rw_gio_pa___pa29___bit 29 +#define reg_pinmux_rw_gio_pa___pa30___lsb 30 +#define reg_pinmux_rw_gio_pa___pa30___width 1 +#define reg_pinmux_rw_gio_pa___pa30___bit 30 +#define reg_pinmux_rw_gio_pa___pa31___lsb 31 +#define reg_pinmux_rw_gio_pa___pa31___width 1 +#define reg_pinmux_rw_gio_pa___pa31___bit 31 +#define reg_pinmux_rw_gio_pa_offset 4 + +/* Register rw_gio_pb, scope pinmux, type rw */ +#define reg_pinmux_rw_gio_pb___pb0___lsb 0 +#define reg_pinmux_rw_gio_pb___pb0___width 1 +#define reg_pinmux_rw_gio_pb___pb0___bit 0 +#define reg_pinmux_rw_gio_pb___pb1___lsb 1 +#define reg_pinmux_rw_gio_pb___pb1___width 1 +#define reg_pinmux_rw_gio_pb___pb1___bit 1 +#define reg_pinmux_rw_gio_pb___pb2___lsb 2 +#define reg_pinmux_rw_gio_pb___pb2___width 1 +#define reg_pinmux_rw_gio_pb___pb2___bit 2 +#define reg_pinmux_rw_gio_pb___pb3___lsb 3 +#define reg_pinmux_rw_gio_pb___pb3___width 1 +#define reg_pinmux_rw_gio_pb___pb3___bit 3 +#define reg_pinmux_rw_gio_pb___pb4___lsb 4 +#define reg_pinmux_rw_gio_pb___pb4___width 1 +#define reg_pinmux_rw_gio_pb___pb4___bit 4 +#define reg_pinmux_rw_gio_pb___pb5___lsb 5 +#define reg_pinmux_rw_gio_pb___pb5___width 1 +#define reg_pinmux_rw_gio_pb___pb5___bit 5 +#define reg_pinmux_rw_gio_pb___pb6___lsb 6 +#define reg_pinmux_rw_gio_pb___pb6___width 1 +#define reg_pinmux_rw_gio_pb___pb6___bit 6 +#define reg_pinmux_rw_gio_pb___pb7___lsb 7 +#define reg_pinmux_rw_gio_pb___pb7___width 1 +#define reg_pinmux_rw_gio_pb___pb7___bit 7 +#define reg_pinmux_rw_gio_pb___pb8___lsb 8 +#define reg_pinmux_rw_gio_pb___pb8___width 1 +#define reg_pinmux_rw_gio_pb___pb8___bit 8 +#define reg_pinmux_rw_gio_pb___pb9___lsb 9 +#define reg_pinmux_rw_gio_pb___pb9___width 1 +#define reg_pinmux_rw_gio_pb___pb9___bit 9 +#define reg_pinmux_rw_gio_pb___pb10___lsb 10 +#define reg_pinmux_rw_gio_pb___pb10___width 1 +#define reg_pinmux_rw_gio_pb___pb10___bit 10 +#define reg_pinmux_rw_gio_pb___pb11___lsb 11 +#define reg_pinmux_rw_gio_pb___pb11___width 1 +#define reg_pinmux_rw_gio_pb___pb11___bit 11 +#define reg_pinmux_rw_gio_pb___pb12___lsb 12 +#define reg_pinmux_rw_gio_pb___pb12___width 1 +#define reg_pinmux_rw_gio_pb___pb12___bit 12 +#define reg_pinmux_rw_gio_pb___pb13___lsb 13 +#define reg_pinmux_rw_gio_pb___pb13___width 1 +#define reg_pinmux_rw_gio_pb___pb13___bit 13 +#define reg_pinmux_rw_gio_pb___pb14___lsb 14 +#define reg_pinmux_rw_gio_pb___pb14___width 1 +#define reg_pinmux_rw_gio_pb___pb14___bit 14 +#define reg_pinmux_rw_gio_pb___pb15___lsb 15 +#define reg_pinmux_rw_gio_pb___pb15___width 1 +#define reg_pinmux_rw_gio_pb___pb15___bit 15 +#define reg_pinmux_rw_gio_pb___pb16___lsb 16 +#define reg_pinmux_rw_gio_pb___pb16___width 1 +#define reg_pinmux_rw_gio_pb___pb16___bit 16 +#define reg_pinmux_rw_gio_pb___pb17___lsb 17 +#define reg_pinmux_rw_gio_pb___pb17___width 1 +#define reg_pinmux_rw_gio_pb___pb17___bit 17 +#define reg_pinmux_rw_gio_pb___pb18___lsb 18 +#define reg_pinmux_rw_gio_pb___pb18___width 1 +#define reg_pinmux_rw_gio_pb___pb18___bit 18 +#define reg_pinmux_rw_gio_pb___pb19___lsb 19 +#define reg_pinmux_rw_gio_pb___pb19___width 1 +#define reg_pinmux_rw_gio_pb___pb19___bit 19 +#define reg_pinmux_rw_gio_pb___pb20___lsb 20 +#define reg_pinmux_rw_gio_pb___pb20___width 1 +#define reg_pinmux_rw_gio_pb___pb20___bit 20 +#define reg_pinmux_rw_gio_pb___pb21___lsb 21 +#define reg_pinmux_rw_gio_pb___pb21___width 1 +#define reg_pinmux_rw_gio_pb___pb21___bit 21 +#define reg_pinmux_rw_gio_pb___pb22___lsb 22 +#define reg_pinmux_rw_gio_pb___pb22___width 1 +#define reg_pinmux_rw_gio_pb___pb22___bit 22 +#define reg_pinmux_rw_gio_pb___pb23___lsb 23 +#define reg_pinmux_rw_gio_pb___pb23___width 1 +#define reg_pinmux_rw_gio_pb___pb23___bit 23 +#define reg_pinmux_rw_gio_pb___pb24___lsb 24 +#define reg_pinmux_rw_gio_pb___pb24___width 1 +#define reg_pinmux_rw_gio_pb___pb24___bit 24 +#define reg_pinmux_rw_gio_pb___pb25___lsb 25 +#define reg_pinmux_rw_gio_pb___pb25___width 1 +#define reg_pinmux_rw_gio_pb___pb25___bit 25 +#define reg_pinmux_rw_gio_pb___pb26___lsb 26 +#define reg_pinmux_rw_gio_pb___pb26___width 1 +#define reg_pinmux_rw_gio_pb___pb26___bit 26 +#define reg_pinmux_rw_gio_pb___pb27___lsb 27 +#define reg_pinmux_rw_gio_pb___pb27___width 1 +#define reg_pinmux_rw_gio_pb___pb27___bit 27 +#define reg_pinmux_rw_gio_pb___pb28___lsb 28 +#define reg_pinmux_rw_gio_pb___pb28___width 1 +#define reg_pinmux_rw_gio_pb___pb28___bit 28 +#define reg_pinmux_rw_gio_pb___pb29___lsb 29 +#define reg_pinmux_rw_gio_pb___pb29___width 1 +#define reg_pinmux_rw_gio_pb___pb29___bit 29 +#define reg_pinmux_rw_gio_pb___pb30___lsb 30 +#define reg_pinmux_rw_gio_pb___pb30___width 1 +#define reg_pinmux_rw_gio_pb___pb30___bit 30 +#define reg_pinmux_rw_gio_pb___pb31___lsb 31 +#define reg_pinmux_rw_gio_pb___pb31___width 1 +#define reg_pinmux_rw_gio_pb___pb31___bit 31 +#define reg_pinmux_rw_gio_pb_offset 8 + +/* Register rw_gio_pc, scope pinmux, type rw */ +#define reg_pinmux_rw_gio_pc___pc0___lsb 0 +#define reg_pinmux_rw_gio_pc___pc0___width 1 +#define reg_pinmux_rw_gio_pc___pc0___bit 0 +#define reg_pinmux_rw_gio_pc___pc1___lsb 1 +#define reg_pinmux_rw_gio_pc___pc1___width 1 +#define reg_pinmux_rw_gio_pc___pc1___bit 1 +#define reg_pinmux_rw_gio_pc___pc2___lsb 2 +#define reg_pinmux_rw_gio_pc___pc2___width 1 +#define reg_pinmux_rw_gio_pc___pc2___bit 2 +#define reg_pinmux_rw_gio_pc___pc3___lsb 3 +#define reg_pinmux_rw_gio_pc___pc3___width 1 +#define reg_pinmux_rw_gio_pc___pc3___bit 3 +#define reg_pinmux_rw_gio_pc___pc4___lsb 4 +#define reg_pinmux_rw_gio_pc___pc4___width 1 +#define reg_pinmux_rw_gio_pc___pc4___bit 4 +#define reg_pinmux_rw_gio_pc___pc5___lsb 5 +#define reg_pinmux_rw_gio_pc___pc5___width 1 +#define reg_pinmux_rw_gio_pc___pc5___bit 5 +#define reg_pinmux_rw_gio_pc___pc6___lsb 6 +#define reg_pinmux_rw_gio_pc___pc6___width 1 +#define reg_pinmux_rw_gio_pc___pc6___bit 6 +#define reg_pinmux_rw_gio_pc___pc7___lsb 7 +#define reg_pinmux_rw_gio_pc___pc7___width 1 +#define reg_pinmux_rw_gio_pc___pc7___bit 7 +#define reg_pinmux_rw_gio_pc___pc8___lsb 8 +#define reg_pinmux_rw_gio_pc___pc8___width 1 +#define reg_pinmux_rw_gio_pc___pc8___bit 8 +#define reg_pinmux_rw_gio_pc___pc9___lsb 9 +#define reg_pinmux_rw_gio_pc___pc9___width 1 +#define reg_pinmux_rw_gio_pc___pc9___bit 9 +#define reg_pinmux_rw_gio_pc___pc10___lsb 10 +#define reg_pinmux_rw_gio_pc___pc10___width 1 +#define reg_pinmux_rw_gio_pc___pc10___bit 10 +#define reg_pinmux_rw_gio_pc___pc11___lsb 11 +#define reg_pinmux_rw_gio_pc___pc11___width 1 +#define reg_pinmux_rw_gio_pc___pc11___bit 11 +#define reg_pinmux_rw_gio_pc___pc12___lsb 12 +#define reg_pinmux_rw_gio_pc___pc12___width 1 +#define reg_pinmux_rw_gio_pc___pc12___bit 12 +#define reg_pinmux_rw_gio_pc___pc13___lsb 13 +#define reg_pinmux_rw_gio_pc___pc13___width 1 +#define reg_pinmux_rw_gio_pc___pc13___bit 13 +#define reg_pinmux_rw_gio_pc___pc14___lsb 14 +#define reg_pinmux_rw_gio_pc___pc14___width 1 +#define reg_pinmux_rw_gio_pc___pc14___bit 14 +#define reg_pinmux_rw_gio_pc___pc15___lsb 15 +#define reg_pinmux_rw_gio_pc___pc15___width 1 +#define reg_pinmux_rw_gio_pc___pc15___bit 15 +#define reg_pinmux_rw_gio_pc_offset 12 + +/* Register rw_iop_pa, scope pinmux, type rw */ +#define reg_pinmux_rw_iop_pa___pa0___lsb 0 +#define reg_pinmux_rw_iop_pa___pa0___width 1 +#define reg_pinmux_rw_iop_pa___pa0___bit 0 +#define reg_pinmux_rw_iop_pa___pa1___lsb 1 +#define reg_pinmux_rw_iop_pa___pa1___width 1 +#define reg_pinmux_rw_iop_pa___pa1___bit 1 +#define reg_pinmux_rw_iop_pa___pa2___lsb 2 +#define reg_pinmux_rw_iop_pa___pa2___width 1 +#define reg_pinmux_rw_iop_pa___pa2___bit 2 +#define reg_pinmux_rw_iop_pa___pa3___lsb 3 +#define reg_pinmux_rw_iop_pa___pa3___width 1 +#define reg_pinmux_rw_iop_pa___pa3___bit 3 +#define reg_pinmux_rw_iop_pa___pa4___lsb 4 +#define reg_pinmux_rw_iop_pa___pa4___width 1 +#define reg_pinmux_rw_iop_pa___pa4___bit 4 +#define reg_pinmux_rw_iop_pa___pa5___lsb 5 +#define reg_pinmux_rw_iop_pa___pa5___width 1 +#define reg_pinmux_rw_iop_pa___pa5___bit 5 +#define reg_pinmux_rw_iop_pa___pa6___lsb 6 +#define reg_pinmux_rw_iop_pa___pa6___width 1 +#define reg_pinmux_rw_iop_pa___pa6___bit 6 +#define reg_pinmux_rw_iop_pa___pa7___lsb 7 +#define reg_pinmux_rw_iop_pa___pa7___width 1 +#define reg_pinmux_rw_iop_pa___pa7___bit 7 +#define reg_pinmux_rw_iop_pa___pa8___lsb 8 +#define reg_pinmux_rw_iop_pa___pa8___width 1 +#define reg_pinmux_rw_iop_pa___pa8___bit 8 +#define reg_pinmux_rw_iop_pa___pa9___lsb 9 +#define reg_pinmux_rw_iop_pa___pa9___width 1 +#define reg_pinmux_rw_iop_pa___pa9___bit 9 +#define reg_pinmux_rw_iop_pa___pa10___lsb 10 +#define reg_pinmux_rw_iop_pa___pa10___width 1 +#define reg_pinmux_rw_iop_pa___pa10___bit 10 +#define reg_pinmux_rw_iop_pa___pa11___lsb 11 +#define reg_pinmux_rw_iop_pa___pa11___width 1 +#define reg_pinmux_rw_iop_pa___pa11___bit 11 +#define reg_pinmux_rw_iop_pa___pa12___lsb 12 +#define reg_pinmux_rw_iop_pa___pa12___width 1 +#define reg_pinmux_rw_iop_pa___pa12___bit 12 +#define reg_pinmux_rw_iop_pa___pa13___lsb 13 +#define reg_pinmux_rw_iop_pa___pa13___width 1 +#define reg_pinmux_rw_iop_pa___pa13___bit 13 +#define reg_pinmux_rw_iop_pa___pa14___lsb 14 +#define reg_pinmux_rw_iop_pa___pa14___width 1 +#define reg_pinmux_rw_iop_pa___pa14___bit 14 +#define reg_pinmux_rw_iop_pa___pa15___lsb 15 +#define reg_pinmux_rw_iop_pa___pa15___width 1 +#define reg_pinmux_rw_iop_pa___pa15___bit 15 +#define reg_pinmux_rw_iop_pa___pa16___lsb 16 +#define reg_pinmux_rw_iop_pa___pa16___width 1 +#define reg_pinmux_rw_iop_pa___pa16___bit 16 +#define reg_pinmux_rw_iop_pa___pa17___lsb 17 +#define reg_pinmux_rw_iop_pa___pa17___width 1 +#define reg_pinmux_rw_iop_pa___pa17___bit 17 +#define reg_pinmux_rw_iop_pa___pa18___lsb 18 +#define reg_pinmux_rw_iop_pa___pa18___width 1 +#define reg_pinmux_rw_iop_pa___pa18___bit 18 +#define reg_pinmux_rw_iop_pa___pa19___lsb 19 +#define reg_pinmux_rw_iop_pa___pa19___width 1 +#define reg_pinmux_rw_iop_pa___pa19___bit 19 +#define reg_pinmux_rw_iop_pa___pa20___lsb 20 +#define reg_pinmux_rw_iop_pa___pa20___width 1 +#define reg_pinmux_rw_iop_pa___pa20___bit 20 +#define reg_pinmux_rw_iop_pa___pa21___lsb 21 +#define reg_pinmux_rw_iop_pa___pa21___width 1 +#define reg_pinmux_rw_iop_pa___pa21___bit 21 +#define reg_pinmux_rw_iop_pa___pa22___lsb 22 +#define reg_pinmux_rw_iop_pa___pa22___width 1 +#define reg_pinmux_rw_iop_pa___pa22___bit 22 +#define reg_pinmux_rw_iop_pa___pa23___lsb 23 +#define reg_pinmux_rw_iop_pa___pa23___width 1 +#define reg_pinmux_rw_iop_pa___pa23___bit 23 +#define reg_pinmux_rw_iop_pa___pa24___lsb 24 +#define reg_pinmux_rw_iop_pa___pa24___width 1 +#define reg_pinmux_rw_iop_pa___pa24___bit 24 +#define reg_pinmux_rw_iop_pa___pa25___lsb 25 +#define reg_pinmux_rw_iop_pa___pa25___width 1 +#define reg_pinmux_rw_iop_pa___pa25___bit 25 +#define reg_pinmux_rw_iop_pa___pa26___lsb 26 +#define reg_pinmux_rw_iop_pa___pa26___width 1 +#define reg_pinmux_rw_iop_pa___pa26___bit 26 +#define reg_pinmux_rw_iop_pa___pa27___lsb 27 +#define reg_pinmux_rw_iop_pa___pa27___width 1 +#define reg_pinmux_rw_iop_pa___pa27___bit 27 +#define reg_pinmux_rw_iop_pa___pa28___lsb 28 +#define reg_pinmux_rw_iop_pa___pa28___width 1 +#define reg_pinmux_rw_iop_pa___pa28___bit 28 +#define reg_pinmux_rw_iop_pa___pa29___lsb 29 +#define reg_pinmux_rw_iop_pa___pa29___width 1 +#define reg_pinmux_rw_iop_pa___pa29___bit 29 +#define reg_pinmux_rw_iop_pa___pa30___lsb 30 +#define reg_pinmux_rw_iop_pa___pa30___width 1 +#define reg_pinmux_rw_iop_pa___pa30___bit 30 +#define reg_pinmux_rw_iop_pa___pa31___lsb 31 +#define reg_pinmux_rw_iop_pa___pa31___width 1 +#define reg_pinmux_rw_iop_pa___pa31___bit 31 +#define reg_pinmux_rw_iop_pa_offset 16 + +/* Register rw_iop_pb, scope pinmux, type rw */ +#define reg_pinmux_rw_iop_pb___pb0___lsb 0 +#define reg_pinmux_rw_iop_pb___pb0___width 1 +#define reg_pinmux_rw_iop_pb___pb0___bit 0 +#define reg_pinmux_rw_iop_pb___pb1___lsb 1 +#define reg_pinmux_rw_iop_pb___pb1___width 1 +#define reg_pinmux_rw_iop_pb___pb1___bit 1 +#define reg_pinmux_rw_iop_pb___pb2___lsb 2 +#define reg_pinmux_rw_iop_pb___pb2___width 1 +#define reg_pinmux_rw_iop_pb___pb2___bit 2 +#define reg_pinmux_rw_iop_pb___pb3___lsb 3 +#define reg_pinmux_rw_iop_pb___pb3___width 1 +#define reg_pinmux_rw_iop_pb___pb3___bit 3 +#define reg_pinmux_rw_iop_pb___pb4___lsb 4 +#define reg_pinmux_rw_iop_pb___pb4___width 1 +#define reg_pinmux_rw_iop_pb___pb4___bit 4 +#define reg_pinmux_rw_iop_pb___pb5___lsb 5 +#define reg_pinmux_rw_iop_pb___pb5___width 1 +#define reg_pinmux_rw_iop_pb___pb5___bit 5 +#define reg_pinmux_rw_iop_pb___pb6___lsb 6 +#define reg_pinmux_rw_iop_pb___pb6___width 1 +#define reg_pinmux_rw_iop_pb___pb6___bit 6 +#define reg_pinmux_rw_iop_pb___pb7___lsb 7 +#define reg_pinmux_rw_iop_pb___pb7___width 1 +#define reg_pinmux_rw_iop_pb___pb7___bit 7 +#define reg_pinmux_rw_iop_pb_offset 20 + +/* Register rw_iop_pio, scope pinmux, type rw */ +#define reg_pinmux_rw_iop_pio___d0___lsb 0 +#define reg_pinmux_rw_iop_pio___d0___width 1 +#define reg_pinmux_rw_iop_pio___d0___bit 0 +#define reg_pinmux_rw_iop_pio___d1___lsb 1 +#define reg_pinmux_rw_iop_pio___d1___width 1 +#define reg_pinmux_rw_iop_pio___d1___bit 1 +#define reg_pinmux_rw_iop_pio___d2___lsb 2 +#define reg_pinmux_rw_iop_pio___d2___width 1 +#define reg_pinmux_rw_iop_pio___d2___bit 2 +#define reg_pinmux_rw_iop_pio___d3___lsb 3 +#define reg_pinmux_rw_iop_pio___d3___width 1 +#define reg_pinmux_rw_iop_pio___d3___bit 3 +#define reg_pinmux_rw_iop_pio___d4___lsb 4 +#define reg_pinmux_rw_iop_pio___d4___width 1 +#define reg_pinmux_rw_iop_pio___d4___bit 4 +#define reg_pinmux_rw_iop_pio___d5___lsb 5 +#define reg_pinmux_rw_iop_pio___d5___width 1 +#define reg_pinmux_rw_iop_pio___d5___bit 5 +#define reg_pinmux_rw_iop_pio___d6___lsb 6 +#define reg_pinmux_rw_iop_pio___d6___width 1 +#define reg_pinmux_rw_iop_pio___d6___bit 6 +#define reg_pinmux_rw_iop_pio___d7___lsb 7 +#define reg_pinmux_rw_iop_pio___d7___width 1 +#define reg_pinmux_rw_iop_pio___d7___bit 7 +#define reg_pinmux_rw_iop_pio___rd_n___lsb 8 +#define reg_pinmux_rw_iop_pio___rd_n___width 1 +#define reg_pinmux_rw_iop_pio___rd_n___bit 8 +#define reg_pinmux_rw_iop_pio___wr_n___lsb 9 +#define reg_pinmux_rw_iop_pio___wr_n___width 1 +#define reg_pinmux_rw_iop_pio___wr_n___bit 9 +#define reg_pinmux_rw_iop_pio___a0___lsb 10 +#define reg_pinmux_rw_iop_pio___a0___width 1 +#define reg_pinmux_rw_iop_pio___a0___bit 10 +#define reg_pinmux_rw_iop_pio___a1___lsb 11 +#define reg_pinmux_rw_iop_pio___a1___width 1 +#define reg_pinmux_rw_iop_pio___a1___bit 11 +#define reg_pinmux_rw_iop_pio___ce0_n___lsb 12 +#define reg_pinmux_rw_iop_pio___ce0_n___width 1 +#define reg_pinmux_rw_iop_pio___ce0_n___bit 12 +#define reg_pinmux_rw_iop_pio___ce1_n___lsb 13 +#define reg_pinmux_rw_iop_pio___ce1_n___width 1 +#define reg_pinmux_rw_iop_pio___ce1_n___bit 13 +#define reg_pinmux_rw_iop_pio___ce2_n___lsb 14 +#define reg_pinmux_rw_iop_pio___ce2_n___width 1 +#define reg_pinmux_rw_iop_pio___ce2_n___bit 14 +#define reg_pinmux_rw_iop_pio___rdy___lsb 15 +#define reg_pinmux_rw_iop_pio___rdy___width 1 +#define reg_pinmux_rw_iop_pio___rdy___bit 15 +#define reg_pinmux_rw_iop_pio_offset 24 + +/* Register rw_iop_usb, scope pinmux, type rw */ +#define reg_pinmux_rw_iop_usb___usb0___lsb 0 +#define reg_pinmux_rw_iop_usb___usb0___width 1 +#define reg_pinmux_rw_iop_usb___usb0___bit 0 +#define reg_pinmux_rw_iop_usb_offset 28 + + +/* Constants */ +#define regk_pinmux_no 0x00000000 +#define regk_pinmux_rw_gio_pa_default 0x00000000 +#define regk_pinmux_rw_gio_pb_default 0x00000000 +#define regk_pinmux_rw_gio_pc_default 0x00000000 +#define regk_pinmux_rw_hwprot_default 0x00000000 +#define regk_pinmux_rw_iop_pa_default 0x00000000 +#define regk_pinmux_rw_iop_pb_default 0x00000000 +#define regk_pinmux_rw_iop_pio_default 0x00000000 +#define regk_pinmux_rw_iop_usb_default 0x00000001 +#define regk_pinmux_yes 0x00000001 +#endif /* __pinmux_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/asm/pio_defs_asm.h b/include/asm-cris/arch-v32/mach-a3/hwregs/asm/pio_defs_asm.h new file mode 100644 index 000000000000..3907ef4921c8 --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/asm/pio_defs_asm.h @@ -0,0 +1,337 @@ +#ifndef __pio_defs_asm_h +#define __pio_defs_asm_h + +/* + * This file is autogenerated from + * file: pio.r + * + * by ../../../tools/rdesc/bin/rdes2c -asm -outfile pio_defs_asm.h pio.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_data, scope pio, type rw */ +#define reg_pio_rw_data_offset 64 + +/* Register rw_io_access0, scope pio, type rw */ +#define reg_pio_rw_io_access0___data___lsb 0 +#define reg_pio_rw_io_access0___data___width 8 +#define reg_pio_rw_io_access0_offset 0 + +/* Register rw_io_access1, scope pio, type rw */ +#define reg_pio_rw_io_access1___data___lsb 0 +#define reg_pio_rw_io_access1___data___width 8 +#define reg_pio_rw_io_access1_offset 4 + +/* Register rw_io_access2, scope pio, type rw */ +#define reg_pio_rw_io_access2___data___lsb 0 +#define reg_pio_rw_io_access2___data___width 8 +#define reg_pio_rw_io_access2_offset 8 + +/* Register rw_io_access3, scope pio, type rw */ +#define reg_pio_rw_io_access3___data___lsb 0 +#define reg_pio_rw_io_access3___data___width 8 +#define reg_pio_rw_io_access3_offset 12 + +/* Register rw_io_access4, scope pio, type rw */ +#define reg_pio_rw_io_access4___data___lsb 0 +#define reg_pio_rw_io_access4___data___width 8 +#define reg_pio_rw_io_access4_offset 16 + +/* Register rw_io_access5, scope pio, type rw */ +#define reg_pio_rw_io_access5___data___lsb 0 +#define reg_pio_rw_io_access5___data___width 8 +#define reg_pio_rw_io_access5_offset 20 + +/* Register rw_io_access6, scope pio, type rw */ +#define reg_pio_rw_io_access6___data___lsb 0 +#define reg_pio_rw_io_access6___data___width 8 +#define reg_pio_rw_io_access6_offset 24 + +/* Register rw_io_access7, scope pio, type rw */ +#define reg_pio_rw_io_access7___data___lsb 0 +#define reg_pio_rw_io_access7___data___width 8 +#define reg_pio_rw_io_access7_offset 28 + +/* Register rw_io_access8, scope pio, type rw */ +#define reg_pio_rw_io_access8___data___lsb 0 +#define reg_pio_rw_io_access8___data___width 8 +#define reg_pio_rw_io_access8_offset 32 + +/* Register rw_io_access9, scope pio, type rw */ +#define reg_pio_rw_io_access9___data___lsb 0 +#define reg_pio_rw_io_access9___data___width 8 +#define reg_pio_rw_io_access9_offset 36 + +/* Register rw_io_access10, scope pio, type rw */ +#define reg_pio_rw_io_access10___data___lsb 0 +#define reg_pio_rw_io_access10___data___width 8 +#define reg_pio_rw_io_access10_offset 40 + +/* Register rw_io_access11, scope pio, type rw */ +#define reg_pio_rw_io_access11___data___lsb 0 +#define reg_pio_rw_io_access11___data___width 8 +#define reg_pio_rw_io_access11_offset 44 + +/* Register rw_io_access12, scope pio, type rw */ +#define reg_pio_rw_io_access12___data___lsb 0 +#define reg_pio_rw_io_access12___data___width 8 +#define reg_pio_rw_io_access12_offset 48 + +/* Register rw_io_access13, scope pio, type rw */ +#define reg_pio_rw_io_access13___data___lsb 0 +#define reg_pio_rw_io_access13___data___width 8 +#define reg_pio_rw_io_access13_offset 52 + +/* Register rw_io_access14, scope pio, type rw */ +#define reg_pio_rw_io_access14___data___lsb 0 +#define reg_pio_rw_io_access14___data___width 8 +#define reg_pio_rw_io_access14_offset 56 + +/* Register rw_io_access15, scope pio, type rw */ +#define reg_pio_rw_io_access15___data___lsb 0 +#define reg_pio_rw_io_access15___data___width 8 +#define reg_pio_rw_io_access15_offset 60 + +/* Register rw_ce0_cfg, scope pio, type rw */ +#define reg_pio_rw_ce0_cfg___lw___lsb 0 +#define reg_pio_rw_ce0_cfg___lw___width 6 +#define reg_pio_rw_ce0_cfg___ew___lsb 6 +#define reg_pio_rw_ce0_cfg___ew___width 3 +#define reg_pio_rw_ce0_cfg___zw___lsb 9 +#define reg_pio_rw_ce0_cfg___zw___width 3 +#define reg_pio_rw_ce0_cfg___aw___lsb 12 +#define reg_pio_rw_ce0_cfg___aw___width 2 +#define reg_pio_rw_ce0_cfg___mode___lsb 14 +#define reg_pio_rw_ce0_cfg___mode___width 2 +#define reg_pio_rw_ce0_cfg_offset 68 + +/* Register rw_ce1_cfg, scope pio, type rw */ +#define reg_pio_rw_ce1_cfg___lw___lsb 0 +#define reg_pio_rw_ce1_cfg___lw___width 6 +#define reg_pio_rw_ce1_cfg___ew___lsb 6 +#define reg_pio_rw_ce1_cfg___ew___width 3 +#define reg_pio_rw_ce1_cfg___zw___lsb 9 +#define reg_pio_rw_ce1_cfg___zw___width 3 +#define reg_pio_rw_ce1_cfg___aw___lsb 12 +#define reg_pio_rw_ce1_cfg___aw___width 2 +#define reg_pio_rw_ce1_cfg___mode___lsb 14 +#define reg_pio_rw_ce1_cfg___mode___width 2 +#define reg_pio_rw_ce1_cfg_offset 72 + +/* Register rw_ce2_cfg, scope pio, type rw */ +#define reg_pio_rw_ce2_cfg___lw___lsb 0 +#define reg_pio_rw_ce2_cfg___lw___width 6 +#define reg_pio_rw_ce2_cfg___ew___lsb 6 +#define reg_pio_rw_ce2_cfg___ew___width 3 +#define reg_pio_rw_ce2_cfg___zw___lsb 9 +#define reg_pio_rw_ce2_cfg___zw___width 3 +#define reg_pio_rw_ce2_cfg___aw___lsb 12 +#define reg_pio_rw_ce2_cfg___aw___width 2 +#define reg_pio_rw_ce2_cfg___mode___lsb 14 +#define reg_pio_rw_ce2_cfg___mode___width 2 +#define reg_pio_rw_ce2_cfg_offset 76 + +/* Register rw_dout, scope pio, type rw */ +#define reg_pio_rw_dout___data___lsb 0 +#define reg_pio_rw_dout___data___width 8 +#define reg_pio_rw_dout___rd_n___lsb 8 +#define reg_pio_rw_dout___rd_n___width 1 +#define reg_pio_rw_dout___rd_n___bit 8 +#define reg_pio_rw_dout___wr_n___lsb 9 +#define reg_pio_rw_dout___wr_n___width 1 +#define reg_pio_rw_dout___wr_n___bit 9 +#define reg_pio_rw_dout___a0___lsb 10 +#define reg_pio_rw_dout___a0___width 1 +#define reg_pio_rw_dout___a0___bit 10 +#define reg_pio_rw_dout___a1___lsb 11 +#define reg_pio_rw_dout___a1___width 1 +#define reg_pio_rw_dout___a1___bit 11 +#define reg_pio_rw_dout___ce0_n___lsb 12 +#define reg_pio_rw_dout___ce0_n___width 1 +#define reg_pio_rw_dout___ce0_n___bit 12 +#define reg_pio_rw_dout___ce1_n___lsb 13 +#define reg_pio_rw_dout___ce1_n___width 1 +#define reg_pio_rw_dout___ce1_n___bit 13 +#define reg_pio_rw_dout___ce2_n___lsb 14 +#define reg_pio_rw_dout___ce2_n___width 1 +#define reg_pio_rw_dout___ce2_n___bit 14 +#define reg_pio_rw_dout___rdy___lsb 15 +#define reg_pio_rw_dout___rdy___width 1 +#define reg_pio_rw_dout___rdy___bit 15 +#define reg_pio_rw_dout_offset 80 + +/* Register rw_oe, scope pio, type rw */ +#define reg_pio_rw_oe___data___lsb 0 +#define reg_pio_rw_oe___data___width 8 +#define reg_pio_rw_oe___rd_n___lsb 8 +#define reg_pio_rw_oe___rd_n___width 1 +#define reg_pio_rw_oe___rd_n___bit 8 +#define reg_pio_rw_oe___wr_n___lsb 9 +#define reg_pio_rw_oe___wr_n___width 1 +#define reg_pio_rw_oe___wr_n___bit 9 +#define reg_pio_rw_oe___a0___lsb 10 +#define reg_pio_rw_oe___a0___width 1 +#define reg_pio_rw_oe___a0___bit 10 +#define reg_pio_rw_oe___a1___lsb 11 +#define reg_pio_rw_oe___a1___width 1 +#define reg_pio_rw_oe___a1___bit 11 +#define reg_pio_rw_oe___ce0_n___lsb 12 +#define reg_pio_rw_oe___ce0_n___width 1 +#define reg_pio_rw_oe___ce0_n___bit 12 +#define reg_pio_rw_oe___ce1_n___lsb 13 +#define reg_pio_rw_oe___ce1_n___width 1 +#define reg_pio_rw_oe___ce1_n___bit 13 +#define reg_pio_rw_oe___ce2_n___lsb 14 +#define reg_pio_rw_oe___ce2_n___width 1 +#define reg_pio_rw_oe___ce2_n___bit 14 +#define reg_pio_rw_oe___rdy___lsb 15 +#define reg_pio_rw_oe___rdy___width 1 +#define reg_pio_rw_oe___rdy___bit 15 +#define reg_pio_rw_oe_offset 84 + +/* Register rw_man_ctrl, scope pio, type rw */ +#define reg_pio_rw_man_ctrl___data___lsb 0 +#define reg_pio_rw_man_ctrl___data___width 8 +#define reg_pio_rw_man_ctrl___rd_n___lsb 8 +#define reg_pio_rw_man_ctrl___rd_n___width 1 +#define reg_pio_rw_man_ctrl___rd_n___bit 8 +#define reg_pio_rw_man_ctrl___wr_n___lsb 9 +#define reg_pio_rw_man_ctrl___wr_n___width 1 +#define reg_pio_rw_man_ctrl___wr_n___bit 9 +#define reg_pio_rw_man_ctrl___a0___lsb 10 +#define reg_pio_rw_man_ctrl___a0___width 1 +#define reg_pio_rw_man_ctrl___a0___bit 10 +#define reg_pio_rw_man_ctrl___a1___lsb 11 +#define reg_pio_rw_man_ctrl___a1___width 1 +#define reg_pio_rw_man_ctrl___a1___bit 11 +#define reg_pio_rw_man_ctrl___ce0_n___lsb 12 +#define reg_pio_rw_man_ctrl___ce0_n___width 1 +#define reg_pio_rw_man_ctrl___ce0_n___bit 12 +#define reg_pio_rw_man_ctrl___ce1_n___lsb 13 +#define reg_pio_rw_man_ctrl___ce1_n___width 1 +#define reg_pio_rw_man_ctrl___ce1_n___bit 13 +#define reg_pio_rw_man_ctrl___ce2_n___lsb 14 +#define reg_pio_rw_man_ctrl___ce2_n___width 1 +#define reg_pio_rw_man_ctrl___ce2_n___bit 14 +#define reg_pio_rw_man_ctrl___rdy___lsb 15 +#define reg_pio_rw_man_ctrl___rdy___width 1 +#define reg_pio_rw_man_ctrl___rdy___bit 15 +#define reg_pio_rw_man_ctrl_offset 88 + +/* Register r_din, scope pio, type r */ +#define reg_pio_r_din___data___lsb 0 +#define reg_pio_r_din___data___width 8 +#define reg_pio_r_din___rd_n___lsb 8 +#define reg_pio_r_din___rd_n___width 1 +#define reg_pio_r_din___rd_n___bit 8 +#define reg_pio_r_din___wr_n___lsb 9 +#define reg_pio_r_din___wr_n___width 1 +#define reg_pio_r_din___wr_n___bit 9 +#define reg_pio_r_din___a0___lsb 10 +#define reg_pio_r_din___a0___width 1 +#define reg_pio_r_din___a0___bit 10 +#define reg_pio_r_din___a1___lsb 11 +#define reg_pio_r_din___a1___width 1 +#define reg_pio_r_din___a1___bit 11 +#define reg_pio_r_din___ce0_n___lsb 12 +#define reg_pio_r_din___ce0_n___width 1 +#define reg_pio_r_din___ce0_n___bit 12 +#define reg_pio_r_din___ce1_n___lsb 13 +#define reg_pio_r_din___ce1_n___width 1 +#define reg_pio_r_din___ce1_n___bit 13 +#define reg_pio_r_din___ce2_n___lsb 14 +#define reg_pio_r_din___ce2_n___width 1 +#define reg_pio_r_din___ce2_n___bit 14 +#define reg_pio_r_din___rdy___lsb 15 +#define reg_pio_r_din___rdy___width 1 +#define reg_pio_r_din___rdy___bit 15 +#define reg_pio_r_din_offset 92 + +/* Register r_stat, scope pio, type r */ +#define reg_pio_r_stat___busy___lsb 0 +#define reg_pio_r_stat___busy___width 1 +#define reg_pio_r_stat___busy___bit 0 +#define reg_pio_r_stat_offset 96 + +/* Register rw_intr_mask, scope pio, type rw */ +#define reg_pio_rw_intr_mask___rdy___lsb 0 +#define reg_pio_rw_intr_mask___rdy___width 1 +#define reg_pio_rw_intr_mask___rdy___bit 0 +#define reg_pio_rw_intr_mask_offset 100 + +/* Register rw_ack_intr, scope pio, type rw */ +#define reg_pio_rw_ack_intr___rdy___lsb 0 +#define reg_pio_rw_ack_intr___rdy___width 1 +#define reg_pio_rw_ack_intr___rdy___bit 0 +#define reg_pio_rw_ack_intr_offset 104 + +/* Register r_intr, scope pio, type r */ +#define reg_pio_r_intr___rdy___lsb 0 +#define reg_pio_r_intr___rdy___width 1 +#define reg_pio_r_intr___rdy___bit 0 +#define reg_pio_r_intr_offset 108 + +/* Register r_masked_intr, scope pio, type r */ +#define reg_pio_r_masked_intr___rdy___lsb 0 +#define reg_pio_r_masked_intr___rdy___width 1 +#define reg_pio_r_masked_intr___rdy___bit 0 +#define reg_pio_r_masked_intr_offset 112 + + +/* Constants */ +#define regk_pio_a2 0x00000003 +#define regk_pio_no 0x00000000 +#define regk_pio_normal 0x00000000 +#define regk_pio_rd 0x00000001 +#define regk_pio_rw_ce0_cfg_default 0x00000000 +#define regk_pio_rw_ce1_cfg_default 0x00000000 +#define regk_pio_rw_ce2_cfg_default 0x00000000 +#define regk_pio_rw_intr_mask_default 0x00000000 +#define regk_pio_rw_man_ctrl_default 0x00000000 +#define regk_pio_rw_oe_default 0x00000000 +#define regk_pio_wr 0x00000002 +#define regk_pio_wr_ce2 0x00000003 +#define regk_pio_yes 0x00000001 +#define regk_pio_yes_all 0x000000ff +#endif /* __pio_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/asm/reg_map_asm.h b/include/asm-cris/arch-v32/mach-a3/hwregs/asm/reg_map_asm.h new file mode 100644 index 000000000000..89439e9610e2 --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/asm/reg_map_asm.h @@ -0,0 +1,99 @@ +#ifndef __reg_map_asm_h +#define __reg_map_asm_h + +/* + * This file is autogenerated from + * file: reg.rmap + * + * by ../../../tools/rdesc/bin/rdes2c -asm -base 0xb0000000 -map marb_bar.r marb_foo.r ccd_top.r ccd_stat.r ccd_tg.r ccd_dp.r ccd.r iop_sap_in.r iop_sap_out.r iop_sw_cfg.r iop_sw_cpu.r iop_sw_mpu.r iop_sw_spu.r iop_version.r iop_crc_par.r iop_dmc_in.r iop_dmc_out.r iop_fifo_in_extra.r iop_fifo_in.r iop_fifo_out_extra.r iop_fifo_out.r iop_mc.r iop_mpu.r iop_scrc_in.r iop_scrc_out.r iop_spu.r iop_timer_grp.r iop_trigger_grp.r iop.r -outfile reg_map_asm.h reg.rmap + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +#define regi_ccd 0xb0000000 +#define regi_ccd_top 0xb0000000 +#define regi_ccd_dp 0xb0000400 +#define regi_ccd_stat 0xb0000800 +#define regi_ccd_tg 0xb0001000 +#define regi_cfg 0xb0002000 +#define regi_clkgen 0xb0004000 +#define regi_ddr2_ctrl 0xb0006000 +#define regi_dma0 0xb0008000 +#define regi_dma1 0xb000a000 +#define regi_dma11 0xb000c000 +#define regi_dma2 0xb000e000 +#define regi_dma3 0xb0010000 +#define regi_dma4 0xb0012000 +#define regi_dma5 0xb0014000 +#define regi_dma6 0xb0016000 +#define regi_dma7 0xb0018000 +#define regi_dma9 0xb001a000 +#define regi_eth 0xb001c000 +#define regi_gio 0xb0020000 +#define regi_h264 0xb0022000 +#define regi_hist 0xb0026000 +#define regi_iop 0xb0028000 +#define regi_iop_version 0xb0028000 +#define regi_iop_fifo_in_extra 0xb0028040 +#define regi_iop_fifo_out_extra 0xb0028080 +#define regi_iop_trigger_grp0 0xb00280c0 +#define regi_iop_trigger_grp1 0xb0028100 +#define regi_iop_trigger_grp2 0xb0028140 +#define regi_iop_trigger_grp3 0xb0028180 +#define regi_iop_trigger_grp4 0xb00281c0 +#define regi_iop_trigger_grp5 0xb0028200 +#define regi_iop_trigger_grp6 0xb0028240 +#define regi_iop_trigger_grp7 0xb0028280 +#define regi_iop_crc_par 0xb0028300 +#define regi_iop_dmc_in 0xb0028380 +#define regi_iop_dmc_out 0xb0028400 +#define regi_iop_fifo_in 0xb0028480 +#define regi_iop_fifo_out 0xb0028500 +#define regi_iop_scrc_in 0xb0028580 +#define regi_iop_scrc_out 0xb0028600 +#define regi_iop_timer_grp0 0xb0028680 +#define regi_iop_timer_grp1 0xb0028700 +#define regi_iop_sap_in 0xb0028800 +#define regi_iop_sap_out 0xb0028900 +#define regi_iop_spu 0xb0028a00 +#define regi_iop_sw_cfg 0xb0028b00 +#define regi_iop_sw_cpu 0xb0028c00 +#define regi_iop_sw_mpu 0xb0028d00 +#define regi_iop_sw_spu 0xb0028e00 +#define regi_iop_mpu 0xb0029000 +#define regi_irq 0xb002a000 +#define regi_jpeg 0xb002c000 +#define regi_l2cache 0xb0030000 +#define regi_marb_bar 0xb0032000 +#define regi_marb_bar_bp0 0xb0032140 +#define regi_marb_bar_bp1 0xb0032180 +#define regi_marb_bar_bp2 0xb00321c0 +#define regi_marb_bar_bp3 0xb0032200 +#define regi_marb_foo 0xb0034000 +#define regi_marb_foo_bp0 0xb0034280 +#define regi_marb_foo_bp1 0xb00342c0 +#define regi_marb_foo_bp2 0xb0034300 +#define regi_marb_foo_bp3 0xb0034340 +#define regi_pinmux 0xb0038000 +#define regi_pio 0xb0036000 +#define regi_sclr 0xb003a000 +#define regi_sclr_fifo 0xb003c000 +#define regi_ser0 0xb003e000 +#define regi_ser1 0xb0040000 +#define regi_ser2 0xb0042000 +#define regi_ser3 0xb0044000 +#define regi_ser4 0xb0046000 +#define regi_sser 0xb0048000 +#define regi_strcop 0xb004a000 +#define regi_strdma0 0xb004e000 +#define regi_strdma1 0xb0050000 +#define regi_strdma2 0xb0052000 +#define regi_strdma3 0xb0054000 +#define regi_strdma5 0xb0056000 +#define regi_strmux 0xb004c000 +#define regi_timer0 0xb0058000 +#define regi_timer1 0xb005a000 +#define regi_trace 0xb005c000 +#define regi_vin 0xb005e000 +#define regi_vout 0xb0060000 +#endif /* __reg_map_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/asm/timer_defs_asm.h b/include/asm-cris/arch-v32/mach-a3/hwregs/asm/timer_defs_asm.h new file mode 100644 index 000000000000..b129e826fc34 --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/asm/timer_defs_asm.h @@ -0,0 +1,228 @@ +#ifndef __timer_defs_asm_h +#define __timer_defs_asm_h + +/* + * This file is autogenerated from + * file: timer.r + * + * by ../../../tools/rdesc/bin/rdes2c -asm -outfile timer_defs_asm.h timer.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_tmr0_div, scope timer, type rw */ +#define reg_timer_rw_tmr0_div_offset 0 + +/* Register r_tmr0_data, scope timer, type r */ +#define reg_timer_r_tmr0_data_offset 4 + +/* Register rw_tmr0_ctrl, scope timer, type rw */ +#define reg_timer_rw_tmr0_ctrl___op___lsb 0 +#define reg_timer_rw_tmr0_ctrl___op___width 2 +#define reg_timer_rw_tmr0_ctrl___freq___lsb 2 +#define reg_timer_rw_tmr0_ctrl___freq___width 3 +#define reg_timer_rw_tmr0_ctrl_offset 8 + +/* Register rw_tmr1_div, scope timer, type rw */ +#define reg_timer_rw_tmr1_div_offset 16 + +/* Register r_tmr1_data, scope timer, type r */ +#define reg_timer_r_tmr1_data_offset 20 + +/* Register rw_tmr1_ctrl, scope timer, type rw */ +#define reg_timer_rw_tmr1_ctrl___op___lsb 0 +#define reg_timer_rw_tmr1_ctrl___op___width 2 +#define reg_timer_rw_tmr1_ctrl___freq___lsb 2 +#define reg_timer_rw_tmr1_ctrl___freq___width 3 +#define reg_timer_rw_tmr1_ctrl_offset 24 + +/* Register rs_cnt_data, scope timer, type rs */ +#define reg_timer_rs_cnt_data___tmr___lsb 0 +#define reg_timer_rs_cnt_data___tmr___width 24 +#define reg_timer_rs_cnt_data___cnt___lsb 24 +#define reg_timer_rs_cnt_data___cnt___width 8 +#define reg_timer_rs_cnt_data_offset 32 + +/* Register r_cnt_data, scope timer, type r */ +#define reg_timer_r_cnt_data___tmr___lsb 0 +#define reg_timer_r_cnt_data___tmr___width 24 +#define reg_timer_r_cnt_data___cnt___lsb 24 +#define reg_timer_r_cnt_data___cnt___width 8 +#define reg_timer_r_cnt_data_offset 36 + +/* Register rw_cnt_cfg, scope timer, type rw */ +#define reg_timer_rw_cnt_cfg___clk___lsb 0 +#define reg_timer_rw_cnt_cfg___clk___width 2 +#define reg_timer_rw_cnt_cfg_offset 40 + +/* Register rw_trig, scope timer, type rw */ +#define reg_timer_rw_trig_offset 48 + +/* Register rw_trig_cfg, scope timer, type rw */ +#define reg_timer_rw_trig_cfg___tmr___lsb 0 +#define reg_timer_rw_trig_cfg___tmr___width 2 +#define reg_timer_rw_trig_cfg_offset 52 + +/* Register r_time, scope timer, type r */ +#define reg_timer_r_time_offset 56 + +/* Register rw_out, scope timer, type rw */ +#define reg_timer_rw_out___tmr___lsb 0 +#define reg_timer_rw_out___tmr___width 2 +#define reg_timer_rw_out_offset 60 + +/* Register rw_wd_ctrl, scope timer, type rw */ +#define reg_timer_rw_wd_ctrl___cnt___lsb 0 +#define reg_timer_rw_wd_ctrl___cnt___width 8 +#define reg_timer_rw_wd_ctrl___cmd___lsb 8 +#define reg_timer_rw_wd_ctrl___cmd___width 1 +#define reg_timer_rw_wd_ctrl___cmd___bit 8 +#define reg_timer_rw_wd_ctrl___key___lsb 9 +#define reg_timer_rw_wd_ctrl___key___width 7 +#define reg_timer_rw_wd_ctrl_offset 64 + +/* Register r_wd_stat, scope timer, type r */ +#define reg_timer_r_wd_stat___cnt___lsb 0 +#define reg_timer_r_wd_stat___cnt___width 8 +#define reg_timer_r_wd_stat___cmd___lsb 8 +#define reg_timer_r_wd_stat___cmd___width 1 +#define reg_timer_r_wd_stat___cmd___bit 8 +#define reg_timer_r_wd_stat_offset 68 + +/* Register rw_intr_mask, scope timer, type rw */ +#define reg_timer_rw_intr_mask___tmr0___lsb 0 +#define reg_timer_rw_intr_mask___tmr0___width 1 +#define reg_timer_rw_intr_mask___tmr0___bit 0 +#define reg_timer_rw_intr_mask___tmr1___lsb 1 +#define reg_timer_rw_intr_mask___tmr1___width 1 +#define reg_timer_rw_intr_mask___tmr1___bit 1 +#define reg_timer_rw_intr_mask___cnt___lsb 2 +#define reg_timer_rw_intr_mask___cnt___width 1 +#define reg_timer_rw_intr_mask___cnt___bit 2 +#define reg_timer_rw_intr_mask___trig___lsb 3 +#define reg_timer_rw_intr_mask___trig___width 1 +#define reg_timer_rw_intr_mask___trig___bit 3 +#define reg_timer_rw_intr_mask_offset 72 + +/* Register rw_ack_intr, scope timer, type rw */ +#define reg_timer_rw_ack_intr___tmr0___lsb 0 +#define reg_timer_rw_ack_intr___tmr0___width 1 +#define reg_timer_rw_ack_intr___tmr0___bit 0 +#define reg_timer_rw_ack_intr___tmr1___lsb 1 +#define reg_timer_rw_ack_intr___tmr1___width 1 +#define reg_timer_rw_ack_intr___tmr1___bit 1 +#define reg_timer_rw_ack_intr___cnt___lsb 2 +#define reg_timer_rw_ack_intr___cnt___width 1 +#define reg_timer_rw_ack_intr___cnt___bit 2 +#define reg_timer_rw_ack_intr___trig___lsb 3 +#define reg_timer_rw_ack_intr___trig___width 1 +#define reg_timer_rw_ack_intr___trig___bit 3 +#define reg_timer_rw_ack_intr_offset 76 + +/* Register r_intr, scope timer, type r */ +#define reg_timer_r_intr___tmr0___lsb 0 +#define reg_timer_r_intr___tmr0___width 1 +#define reg_timer_r_intr___tmr0___bit 0 +#define reg_timer_r_intr___tmr1___lsb 1 +#define reg_timer_r_intr___tmr1___width 1 +#define reg_timer_r_intr___tmr1___bit 1 +#define reg_timer_r_intr___cnt___lsb 2 +#define reg_timer_r_intr___cnt___width 1 +#define reg_timer_r_intr___cnt___bit 2 +#define reg_timer_r_intr___trig___lsb 3 +#define reg_timer_r_intr___trig___width 1 +#define reg_timer_r_intr___trig___bit 3 +#define reg_timer_r_intr_offset 80 + +/* Register r_masked_intr, scope timer, type r */ +#define reg_timer_r_masked_intr___tmr0___lsb 0 +#define reg_timer_r_masked_intr___tmr0___width 1 +#define reg_timer_r_masked_intr___tmr0___bit 0 +#define reg_timer_r_masked_intr___tmr1___lsb 1 +#define reg_timer_r_masked_intr___tmr1___width 1 +#define reg_timer_r_masked_intr___tmr1___bit 1 +#define reg_timer_r_masked_intr___cnt___lsb 2 +#define reg_timer_r_masked_intr___cnt___width 1 +#define reg_timer_r_masked_intr___cnt___bit 2 +#define reg_timer_r_masked_intr___trig___lsb 3 +#define reg_timer_r_masked_intr___trig___width 1 +#define reg_timer_r_masked_intr___trig___bit 3 +#define reg_timer_r_masked_intr_offset 84 + +/* Register rw_test, scope timer, type rw */ +#define reg_timer_rw_test___dis___lsb 0 +#define reg_timer_rw_test___dis___width 1 +#define reg_timer_rw_test___dis___bit 0 +#define reg_timer_rw_test___en___lsb 1 +#define reg_timer_rw_test___en___width 1 +#define reg_timer_rw_test___en___bit 1 +#define reg_timer_rw_test_offset 88 + + +/* Constants */ +#define regk_timer_ext 0x00000001 +#define regk_timer_f100 0x00000007 +#define regk_timer_f29_493 0x00000004 +#define regk_timer_f32 0x00000005 +#define regk_timer_f32_768 0x00000006 +#define regk_timer_f90 0x00000003 +#define regk_timer_hold 0x00000001 +#define regk_timer_ld 0x00000000 +#define regk_timer_no 0x00000000 +#define regk_timer_off 0x00000000 +#define regk_timer_run 0x00000002 +#define regk_timer_rw_cnt_cfg_default 0x00000000 +#define regk_timer_rw_intr_mask_default 0x00000000 +#define regk_timer_rw_out_default 0x00000000 +#define regk_timer_rw_test_default 0x00000000 +#define regk_timer_rw_tmr0_ctrl_default 0x00000000 +#define regk_timer_rw_tmr1_ctrl_default 0x00000000 +#define regk_timer_rw_trig_cfg_default 0x00000000 +#define regk_timer_start 0x00000001 +#define regk_timer_stop 0x00000000 +#define regk_timer_time 0x00000001 +#define regk_timer_tmr0 0x00000002 +#define regk_timer_tmr1 0x00000003 +#define regk_timer_vclk 0x00000002 +#define regk_timer_yes 0x00000001 +#endif /* __timer_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/clkgen_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/clkgen_defs.h new file mode 100644 index 000000000000..c1e9ba93b3a3 --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/clkgen_defs.h @@ -0,0 +1,159 @@ +#ifndef __clkgen_defs_h +#define __clkgen_defs_h + +/* + * This file is autogenerated from + * file: clkgen.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile clkgen_defs.h clkgen.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope clkgen */ + +/* Register r_bootsel, scope clkgen, type r */ +typedef struct { + unsigned int boot_mode : 5; + unsigned int intern_main_clk : 1; + unsigned int extern_usb2_clk : 1; + unsigned int dummy1 : 25; +} reg_clkgen_r_bootsel; +#define REG_RD_ADDR_clkgen_r_bootsel 0 + +/* Register rw_clk_ctrl, scope clkgen, type rw */ +typedef struct { + unsigned int pll : 1; + unsigned int cpu : 1; + unsigned int iop_usb : 1; + unsigned int vin : 1; + unsigned int sclr : 1; + unsigned int h264 : 1; + unsigned int ddr2 : 1; + unsigned int vout_hist : 1; + unsigned int eth : 1; + unsigned int ccd_tg_200 : 1; + unsigned int dma0_1_eth : 1; + unsigned int ccd_tg_100 : 1; + unsigned int jpeg : 1; + unsigned int sser_ser_dma6_7 : 1; + unsigned int strdma0_2_video : 1; + unsigned int dma2_3_strcop : 1; + unsigned int dma4_5_iop : 1; + unsigned int dma9_11 : 1; + unsigned int memarb_bar_ddr : 1; + unsigned int sclr_h264 : 1; + unsigned int dummy1 : 12; +} reg_clkgen_rw_clk_ctrl; +#define REG_RD_ADDR_clkgen_rw_clk_ctrl 4 +#define REG_WR_ADDR_clkgen_rw_clk_ctrl 4 + + +/* Constants */ +enum { + regk_clkgen_eth1000_rx = 0x0000000c, + regk_clkgen_eth1000_tx = 0x0000000e, + regk_clkgen_eth100_rx = 0x0000001d, + regk_clkgen_eth100_rx_half = 0x0000001c, + regk_clkgen_eth100_tx = 0x0000001f, + regk_clkgen_eth100_tx_half = 0x0000001e, + regk_clkgen_nand_3_2 = 0x00000000, + regk_clkgen_nand_3_2_0x30 = 0x00000002, + regk_clkgen_nand_3_2_0x30_pll = 0x00000012, + regk_clkgen_nand_3_2_pll = 0x00000010, + regk_clkgen_nand_3_3 = 0x00000001, + regk_clkgen_nand_3_3_0x30 = 0x00000003, + regk_clkgen_nand_3_3_0x30_pll = 0x00000013, + regk_clkgen_nand_3_3_pll = 0x00000011, + regk_clkgen_nand_4_2 = 0x00000004, + regk_clkgen_nand_4_2_0x30 = 0x00000006, + regk_clkgen_nand_4_2_0x30_pll = 0x00000016, + regk_clkgen_nand_4_2_pll = 0x00000014, + regk_clkgen_nand_4_3 = 0x00000005, + regk_clkgen_nand_4_3_0x30 = 0x00000007, + regk_clkgen_nand_4_3_0x30_pll = 0x00000017, + regk_clkgen_nand_4_3_pll = 0x00000015, + regk_clkgen_nand_5_2 = 0x00000008, + regk_clkgen_nand_5_2_0x30 = 0x0000000a, + regk_clkgen_nand_5_2_0x30_pll = 0x0000001a, + regk_clkgen_nand_5_2_pll = 0x00000018, + regk_clkgen_nand_5_3 = 0x00000009, + regk_clkgen_nand_5_3_0x30 = 0x0000000b, + regk_clkgen_nand_5_3_0x30_pll = 0x0000001b, + regk_clkgen_nand_5_3_pll = 0x00000019, + regk_clkgen_no = 0x00000000, + regk_clkgen_rw_clk_ctrl_default = 0x00000002, + regk_clkgen_ser = 0x0000000d, + regk_clkgen_ser_pll = 0x0000000f, + regk_clkgen_yes = 0x00000001 +}; +#endif /* __clkgen_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/ddr2_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/ddr2_defs.h new file mode 100644 index 000000000000..0f30e8bf946d --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/ddr2_defs.h @@ -0,0 +1,281 @@ +#ifndef __ddr2_defs_h +#define __ddr2_defs_h + +/* + * This file is autogenerated from + * file: ddr2.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile ddr2_defs.h ddr2.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope ddr2 */ + +/* Register rw_cfg, scope ddr2, type rw */ +typedef struct { + unsigned int col_width : 4; + unsigned int nr_banks : 1; + unsigned int bw : 1; + unsigned int nr_ref : 4; + unsigned int ref_interval : 11; + unsigned int odt_ctrl : 2; + unsigned int odt_mem : 1; + unsigned int imp_strength : 1; + unsigned int auto_imp_cal : 1; + unsigned int imp_cal_override : 1; + unsigned int dll_override : 1; + unsigned int dummy1 : 4; +} reg_ddr2_rw_cfg; +#define REG_RD_ADDR_ddr2_rw_cfg 0 +#define REG_WR_ADDR_ddr2_rw_cfg 0 + +/* Register rw_timing, scope ddr2, type rw */ +typedef struct { + unsigned int wr : 3; + unsigned int rcd : 3; + unsigned int rp : 3; + unsigned int ras : 4; + unsigned int rfc : 7; + unsigned int rc : 5; + unsigned int rtp : 2; + unsigned int rtw : 3; + unsigned int wtr : 2; +} reg_ddr2_rw_timing; +#define REG_RD_ADDR_ddr2_rw_timing 4 +#define REG_WR_ADDR_ddr2_rw_timing 4 + +/* Register rw_latency, scope ddr2, type rw */ +typedef struct { + unsigned int cas : 3; + unsigned int additive : 3; + unsigned int dummy1 : 26; +} reg_ddr2_rw_latency; +#define REG_RD_ADDR_ddr2_rw_latency 8 +#define REG_WR_ADDR_ddr2_rw_latency 8 + +/* Register rw_phy_cfg, scope ddr2, type rw */ +typedef struct { + unsigned int en : 1; + unsigned int dummy1 : 31; +} reg_ddr2_rw_phy_cfg; +#define REG_RD_ADDR_ddr2_rw_phy_cfg 12 +#define REG_WR_ADDR_ddr2_rw_phy_cfg 12 + +/* Register rw_phy_ctrl, scope ddr2, type rw */ +typedef struct { + unsigned int rst : 1; + unsigned int cal_rst : 1; + unsigned int cal_start : 1; + unsigned int dummy1 : 29; +} reg_ddr2_rw_phy_ctrl; +#define REG_RD_ADDR_ddr2_rw_phy_ctrl 16 +#define REG_WR_ADDR_ddr2_rw_phy_ctrl 16 + +/* Register rw_ctrl, scope ddr2, type rw */ +typedef struct { + unsigned int mrs_data : 16; + unsigned int cmd : 8; + unsigned int dummy1 : 8; +} reg_ddr2_rw_ctrl; +#define REG_RD_ADDR_ddr2_rw_ctrl 20 +#define REG_WR_ADDR_ddr2_rw_ctrl 20 + +/* Register rw_pwr_down, scope ddr2, type rw */ +typedef struct { + unsigned int self_ref : 2; + unsigned int phy_en : 1; + unsigned int dummy1 : 29; +} reg_ddr2_rw_pwr_down; +#define REG_RD_ADDR_ddr2_rw_pwr_down 24 +#define REG_WR_ADDR_ddr2_rw_pwr_down 24 + +/* Register r_stat, scope ddr2, type r */ +typedef struct { + unsigned int dll_lock : 1; + unsigned int dll_delay_code : 7; + unsigned int imp_cal_done : 1; + unsigned int imp_cal_fault : 1; + unsigned int cal_imp_pu : 4; + unsigned int cal_imp_pd : 4; + unsigned int dummy1 : 14; +} reg_ddr2_r_stat; +#define REG_RD_ADDR_ddr2_r_stat 28 + +/* Register rw_imp_ctrl, scope ddr2, type rw */ +typedef struct { + unsigned int imp_pu : 4; + unsigned int imp_pd : 4; + unsigned int dummy1 : 24; +} reg_ddr2_rw_imp_ctrl; +#define REG_RD_ADDR_ddr2_rw_imp_ctrl 32 +#define REG_WR_ADDR_ddr2_rw_imp_ctrl 32 + +#define STRIDE_ddr2_rw_dll_ctrl 4 +/* Register rw_dll_ctrl, scope ddr2, type rw */ +typedef struct { + unsigned int mode : 1; + unsigned int clk_delay : 7; + unsigned int dummy1 : 24; +} reg_ddr2_rw_dll_ctrl; +#define REG_RD_ADDR_ddr2_rw_dll_ctrl 36 +#define REG_WR_ADDR_ddr2_rw_dll_ctrl 36 + +#define STRIDE_ddr2_rw_dqs_dll_ctrl 4 +/* Register rw_dqs_dll_ctrl, scope ddr2, type rw */ +typedef struct { + unsigned int dqs90_delay : 7; + unsigned int dqs180_delay : 7; + unsigned int dqs270_delay : 7; + unsigned int dqs360_delay : 7; + unsigned int dummy1 : 4; +} reg_ddr2_rw_dqs_dll_ctrl; +#define REG_RD_ADDR_ddr2_rw_dqs_dll_ctrl 52 +#define REG_WR_ADDR_ddr2_rw_dqs_dll_ctrl 52 + + +/* Constants */ +enum { + regk_ddr2_al0 = 0x00000000, + regk_ddr2_al1 = 0x00000008, + regk_ddr2_al2 = 0x00000010, + regk_ddr2_al3 = 0x00000018, + regk_ddr2_al4 = 0x00000020, + regk_ddr2_auto = 0x00000003, + regk_ddr2_bank4 = 0x00000000, + regk_ddr2_bank8 = 0x00000001, + regk_ddr2_bl4 = 0x00000002, + regk_ddr2_bl8 = 0x00000003, + regk_ddr2_bt_il = 0x00000008, + regk_ddr2_bt_seq = 0x00000000, + regk_ddr2_bw16 = 0x00000001, + regk_ddr2_bw32 = 0x00000000, + regk_ddr2_cas2 = 0x00000020, + regk_ddr2_cas3 = 0x00000030, + regk_ddr2_cas4 = 0x00000040, + regk_ddr2_cas5 = 0x00000050, + regk_ddr2_deselect = 0x000000c0, + regk_ddr2_dic_weak = 0x00000002, + regk_ddr2_direct = 0x00000001, + regk_ddr2_dis = 0x00000000, + regk_ddr2_dll_dis = 0x00000001, + regk_ddr2_dll_en = 0x00000000, + regk_ddr2_dll_rst = 0x00000100, + regk_ddr2_emrs = 0x00000081, + regk_ddr2_emrs2 = 0x00000082, + regk_ddr2_emrs3 = 0x00000083, + regk_ddr2_full = 0x00000001, + regk_ddr2_hi_ref_rate = 0x00000080, + regk_ddr2_mrs = 0x00000080, + regk_ddr2_no = 0x00000000, + regk_ddr2_nop = 0x000000b8, + regk_ddr2_ocd_adj = 0x00000200, + regk_ddr2_ocd_default = 0x00000380, + regk_ddr2_ocd_drive0 = 0x00000100, + regk_ddr2_ocd_drive1 = 0x00000080, + regk_ddr2_ocd_exit = 0x00000000, + regk_ddr2_odt_dis = 0x00000000, + regk_ddr2_offs = 0x00000000, + regk_ddr2_pre = 0x00000090, + regk_ddr2_pre_all = 0x00000400, + regk_ddr2_pwr_down_fast = 0x00000000, + regk_ddr2_pwr_down_slow = 0x00001000, + regk_ddr2_ref = 0x00000088, + regk_ddr2_rtt150 = 0x00000040, + regk_ddr2_rtt50 = 0x00000044, + regk_ddr2_rtt75 = 0x00000004, + regk_ddr2_rw_cfg_default = 0x00186000, + regk_ddr2_rw_dll_ctrl_default = 0x00000000, + regk_ddr2_rw_dll_ctrl_size = 0x00000004, + regk_ddr2_rw_dqs_dll_ctrl_default = 0x00000000, + regk_ddr2_rw_dqs_dll_ctrl_size = 0x00000004, + regk_ddr2_rw_latency_default = 0x00000000, + regk_ddr2_rw_phy_cfg_default = 0x00000000, + regk_ddr2_rw_pwr_down_default = 0x00000000, + regk_ddr2_rw_timing_default = 0x00000000, + regk_ddr2_s1Gb = 0x0000001a, + regk_ddr2_s256Mb = 0x0000000f, + regk_ddr2_s2Gb = 0x00000027, + regk_ddr2_s4Gb = 0x00000042, + regk_ddr2_s512Mb = 0x00000015, + regk_ddr2_temp0_85 = 0x00000618, + regk_ddr2_temp85_95 = 0x0000030c, + regk_ddr2_term150 = 0x00000002, + regk_ddr2_term50 = 0x00000003, + regk_ddr2_term75 = 0x00000001, + regk_ddr2_test = 0x00000080, + regk_ddr2_weak = 0x00000000, + regk_ddr2_wr2 = 0x00000200, + regk_ddr2_wr3 = 0x00000400, + regk_ddr2_yes = 0x00000001 +}; +#endif /* __ddr2_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/gio_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/gio_defs.h new file mode 100644 index 000000000000..5d88e0db23ae --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/gio_defs.h @@ -0,0 +1,837 @@ +#ifndef __gio_defs_h +#define __gio_defs_h + +/* + * This file is autogenerated from + * file: gio.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile gio_defs.h gio.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope gio */ + +/* Register r_pa_din, scope gio, type r */ +typedef struct { + unsigned int data : 32; +} reg_gio_r_pa_din; +#define REG_RD_ADDR_gio_r_pa_din 0 + +/* Register rw_pa_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 32; +} reg_gio_rw_pa_dout; +#define REG_RD_ADDR_gio_rw_pa_dout 4 +#define REG_WR_ADDR_gio_rw_pa_dout 4 + +/* Register rw_pa_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 32; +} reg_gio_rw_pa_oe; +#define REG_RD_ADDR_gio_rw_pa_oe 8 +#define REG_WR_ADDR_gio_rw_pa_oe 8 + +/* Register rw_pa_byte0_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pa_byte0_dout; +#define REG_RD_ADDR_gio_rw_pa_byte0_dout 12 +#define REG_WR_ADDR_gio_rw_pa_byte0_dout 12 + +/* Register rw_pa_byte0_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pa_byte0_oe; +#define REG_RD_ADDR_gio_rw_pa_byte0_oe 16 +#define REG_WR_ADDR_gio_rw_pa_byte0_oe 16 + +/* Register rw_pa_byte1_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pa_byte1_dout; +#define REG_RD_ADDR_gio_rw_pa_byte1_dout 20 +#define REG_WR_ADDR_gio_rw_pa_byte1_dout 20 + +/* Register rw_pa_byte1_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pa_byte1_oe; +#define REG_RD_ADDR_gio_rw_pa_byte1_oe 24 +#define REG_WR_ADDR_gio_rw_pa_byte1_oe 24 + +/* Register rw_pa_byte2_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pa_byte2_dout; +#define REG_RD_ADDR_gio_rw_pa_byte2_dout 28 +#define REG_WR_ADDR_gio_rw_pa_byte2_dout 28 + +/* Register rw_pa_byte2_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pa_byte2_oe; +#define REG_RD_ADDR_gio_rw_pa_byte2_oe 32 +#define REG_WR_ADDR_gio_rw_pa_byte2_oe 32 + +/* Register rw_pa_byte3_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pa_byte3_dout; +#define REG_RD_ADDR_gio_rw_pa_byte3_dout 36 +#define REG_WR_ADDR_gio_rw_pa_byte3_dout 36 + +/* Register rw_pa_byte3_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pa_byte3_oe; +#define REG_RD_ADDR_gio_rw_pa_byte3_oe 40 +#define REG_WR_ADDR_gio_rw_pa_byte3_oe 40 + +/* Register r_pb_din, scope gio, type r */ +typedef struct { + unsigned int data : 32; +} reg_gio_r_pb_din; +#define REG_RD_ADDR_gio_r_pb_din 44 + +/* Register rw_pb_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 32; +} reg_gio_rw_pb_dout; +#define REG_RD_ADDR_gio_rw_pb_dout 48 +#define REG_WR_ADDR_gio_rw_pb_dout 48 + +/* Register rw_pb_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 32; +} reg_gio_rw_pb_oe; +#define REG_RD_ADDR_gio_rw_pb_oe 52 +#define REG_WR_ADDR_gio_rw_pb_oe 52 + +/* Register rw_pb_byte0_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pb_byte0_dout; +#define REG_RD_ADDR_gio_rw_pb_byte0_dout 56 +#define REG_WR_ADDR_gio_rw_pb_byte0_dout 56 + +/* Register rw_pb_byte0_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pb_byte0_oe; +#define REG_RD_ADDR_gio_rw_pb_byte0_oe 60 +#define REG_WR_ADDR_gio_rw_pb_byte0_oe 60 + +/* Register rw_pb_byte1_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pb_byte1_dout; +#define REG_RD_ADDR_gio_rw_pb_byte1_dout 64 +#define REG_WR_ADDR_gio_rw_pb_byte1_dout 64 + +/* Register rw_pb_byte1_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pb_byte1_oe; +#define REG_RD_ADDR_gio_rw_pb_byte1_oe 68 +#define REG_WR_ADDR_gio_rw_pb_byte1_oe 68 + +/* Register rw_pb_byte2_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pb_byte2_dout; +#define REG_RD_ADDR_gio_rw_pb_byte2_dout 72 +#define REG_WR_ADDR_gio_rw_pb_byte2_dout 72 + +/* Register rw_pb_byte2_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pb_byte2_oe; +#define REG_RD_ADDR_gio_rw_pb_byte2_oe 76 +#define REG_WR_ADDR_gio_rw_pb_byte2_oe 76 + +/* Register rw_pb_byte3_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pb_byte3_dout; +#define REG_RD_ADDR_gio_rw_pb_byte3_dout 80 +#define REG_WR_ADDR_gio_rw_pb_byte3_dout 80 + +/* Register rw_pb_byte3_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pb_byte3_oe; +#define REG_RD_ADDR_gio_rw_pb_byte3_oe 84 +#define REG_WR_ADDR_gio_rw_pb_byte3_oe 84 + +/* Register r_pc_din, scope gio, type r */ +typedef struct { + unsigned int data : 16; + unsigned int dummy1 : 16; +} reg_gio_r_pc_din; +#define REG_RD_ADDR_gio_r_pc_din 88 + +/* Register rw_pc_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 16; + unsigned int dummy1 : 16; +} reg_gio_rw_pc_dout; +#define REG_RD_ADDR_gio_rw_pc_dout 92 +#define REG_WR_ADDR_gio_rw_pc_dout 92 + +/* Register rw_pc_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 16; + unsigned int dummy1 : 16; +} reg_gio_rw_pc_oe; +#define REG_RD_ADDR_gio_rw_pc_oe 96 +#define REG_WR_ADDR_gio_rw_pc_oe 96 + +/* Register rw_pc_byte0_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pc_byte0_dout; +#define REG_RD_ADDR_gio_rw_pc_byte0_dout 100 +#define REG_WR_ADDR_gio_rw_pc_byte0_dout 100 + +/* Register rw_pc_byte0_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pc_byte0_oe; +#define REG_RD_ADDR_gio_rw_pc_byte0_oe 104 +#define REG_WR_ADDR_gio_rw_pc_byte0_oe 104 + +/* Register rw_pc_byte1_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pc_byte1_dout; +#define REG_RD_ADDR_gio_rw_pc_byte1_dout 108 +#define REG_WR_ADDR_gio_rw_pc_byte1_dout 108 + +/* Register rw_pc_byte1_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pc_byte1_oe; +#define REG_RD_ADDR_gio_rw_pc_byte1_oe 112 +#define REG_WR_ADDR_gio_rw_pc_byte1_oe 112 + +/* Register r_pd_din, scope gio, type r */ +typedef struct { + unsigned int data : 32; +} reg_gio_r_pd_din; +#define REG_RD_ADDR_gio_r_pd_din 116 + +/* Register rw_intr_cfg, scope gio, type rw */ +typedef struct { + unsigned int intr0 : 3; + unsigned int intr1 : 3; + unsigned int intr2 : 3; + unsigned int intr3 : 3; + unsigned int intr4 : 3; + unsigned int intr5 : 3; + unsigned int intr6 : 3; + unsigned int intr7 : 3; + unsigned int dummy1 : 8; +} reg_gio_rw_intr_cfg; +#define REG_RD_ADDR_gio_rw_intr_cfg 120 +#define REG_WR_ADDR_gio_rw_intr_cfg 120 + +/* Register rw_intr_pins, scope gio, type rw */ +typedef struct { + unsigned int intr0 : 4; + unsigned int intr1 : 4; + unsigned int intr2 : 4; + unsigned int intr3 : 4; + unsigned int intr4 : 4; + unsigned int intr5 : 4; + unsigned int intr6 : 4; + unsigned int intr7 : 4; +} reg_gio_rw_intr_pins; +#define REG_RD_ADDR_gio_rw_intr_pins 124 +#define REG_WR_ADDR_gio_rw_intr_pins 124 + +/* Register rw_intr_mask, scope gio, type rw */ +typedef struct { + unsigned int intr0 : 1; + unsigned int intr1 : 1; + unsigned int intr2 : 1; + unsigned int intr3 : 1; + unsigned int intr4 : 1; + unsigned int intr5 : 1; + unsigned int intr6 : 1; + unsigned int intr7 : 1; + unsigned int i2c0_done : 1; + unsigned int i2c1_done : 1; + unsigned int dummy1 : 22; +} reg_gio_rw_intr_mask; +#define REG_RD_ADDR_gio_rw_intr_mask 128 +#define REG_WR_ADDR_gio_rw_intr_mask 128 + +/* Register rw_ack_intr, scope gio, type rw */ +typedef struct { + unsigned int intr0 : 1; + unsigned int intr1 : 1; + unsigned int intr2 : 1; + unsigned int intr3 : 1; + unsigned int intr4 : 1; + unsigned int intr5 : 1; + unsigned int intr6 : 1; + unsigned int intr7 : 1; + unsigned int i2c0_done : 1; + unsigned int i2c1_done : 1; + unsigned int dummy1 : 22; +} reg_gio_rw_ack_intr; +#define REG_RD_ADDR_gio_rw_ack_intr 132 +#define REG_WR_ADDR_gio_rw_ack_intr 132 + +/* Register r_intr, scope gio, type r */ +typedef struct { + unsigned int intr0 : 1; + unsigned int intr1 : 1; + unsigned int intr2 : 1; + unsigned int intr3 : 1; + unsigned int intr4 : 1; + unsigned int intr5 : 1; + unsigned int intr6 : 1; + unsigned int intr7 : 1; + unsigned int i2c0_done : 1; + unsigned int i2c1_done : 1; + unsigned int dummy1 : 22; +} reg_gio_r_intr; +#define REG_RD_ADDR_gio_r_intr 136 + +/* Register r_masked_intr, scope gio, type r */ +typedef struct { + unsigned int intr0 : 1; + unsigned int intr1 : 1; + unsigned int intr2 : 1; + unsigned int intr3 : 1; + unsigned int intr4 : 1; + unsigned int intr5 : 1; + unsigned int intr6 : 1; + unsigned int intr7 : 1; + unsigned int i2c0_done : 1; + unsigned int i2c1_done : 1; + unsigned int dummy1 : 22; +} reg_gio_r_masked_intr; +#define REG_RD_ADDR_gio_r_masked_intr 140 + +/* Register rw_i2c0_start, scope gio, type rw */ +typedef struct { + unsigned int run : 1; + unsigned int dummy1 : 31; +} reg_gio_rw_i2c0_start; +#define REG_RD_ADDR_gio_rw_i2c0_start 144 +#define REG_WR_ADDR_gio_rw_i2c0_start 144 + +/* Register rw_i2c0_cfg, scope gio, type rw */ +typedef struct { + unsigned int en : 1; + unsigned int bit_order : 1; + unsigned int scl_io : 1; + unsigned int scl_inv : 1; + unsigned int sda_io : 1; + unsigned int sda_idle : 1; + unsigned int dummy1 : 26; +} reg_gio_rw_i2c0_cfg; +#define REG_RD_ADDR_gio_rw_i2c0_cfg 148 +#define REG_WR_ADDR_gio_rw_i2c0_cfg 148 + +/* Register rw_i2c0_ctrl, scope gio, type rw */ +typedef struct { + unsigned int trf_bits : 6; + unsigned int switch_dir : 6; + unsigned int extra_start : 3; + unsigned int early_end : 1; + unsigned int start_stop : 1; + unsigned int ack_dir0 : 1; + unsigned int ack_dir1 : 1; + unsigned int ack_dir2 : 1; + unsigned int ack_dir3 : 1; + unsigned int ack_dir4 : 1; + unsigned int ack_dir5 : 1; + unsigned int ack_bit : 1; + unsigned int start_bit : 1; + unsigned int freq : 2; + unsigned int dummy1 : 5; +} reg_gio_rw_i2c0_ctrl; +#define REG_RD_ADDR_gio_rw_i2c0_ctrl 152 +#define REG_WR_ADDR_gio_rw_i2c0_ctrl 152 + +/* Register rw_i2c0_data, scope gio, type rw */ +typedef struct { + unsigned int data0 : 8; + unsigned int data1 : 8; + unsigned int data2 : 8; + unsigned int data3 : 8; +} reg_gio_rw_i2c0_data; +#define REG_RD_ADDR_gio_rw_i2c0_data 156 +#define REG_WR_ADDR_gio_rw_i2c0_data 156 + +/* Register rw_i2c0_data2, scope gio, type rw */ +typedef struct { + unsigned int data4 : 8; + unsigned int data5 : 8; + unsigned int start_val : 6; + unsigned int ack_val : 6; + unsigned int dummy1 : 4; +} reg_gio_rw_i2c0_data2; +#define REG_RD_ADDR_gio_rw_i2c0_data2 160 +#define REG_WR_ADDR_gio_rw_i2c0_data2 160 + +/* Register rw_i2c1_start, scope gio, type rw */ +typedef struct { + unsigned int run : 1; + unsigned int dummy1 : 31; +} reg_gio_rw_i2c1_start; +#define REG_RD_ADDR_gio_rw_i2c1_start 164 +#define REG_WR_ADDR_gio_rw_i2c1_start 164 + +/* Register rw_i2c1_cfg, scope gio, type rw */ +typedef struct { + unsigned int en : 1; + unsigned int bit_order : 1; + unsigned int scl_io : 1; + unsigned int scl_inv : 1; + unsigned int sda0_io : 1; + unsigned int sda0_idle : 1; + unsigned int sda1_io : 1; + unsigned int sda1_idle : 1; + unsigned int sda2_io : 1; + unsigned int sda2_idle : 1; + unsigned int sda3_io : 1; + unsigned int sda3_idle : 1; + unsigned int sda_sel : 2; + unsigned int sen_idle : 1; + unsigned int sen_inv : 1; + unsigned int sen_sel : 2; + unsigned int dummy1 : 14; +} reg_gio_rw_i2c1_cfg; +#define REG_RD_ADDR_gio_rw_i2c1_cfg 168 +#define REG_WR_ADDR_gio_rw_i2c1_cfg 168 + +/* Register rw_i2c1_ctrl, scope gio, type rw */ +typedef struct { + unsigned int trf_bits : 6; + unsigned int switch_dir : 6; + unsigned int extra_start : 3; + unsigned int early_end : 1; + unsigned int start_stop : 1; + unsigned int ack_dir0 : 1; + unsigned int ack_dir1 : 1; + unsigned int ack_dir2 : 1; + unsigned int ack_dir3 : 1; + unsigned int ack_dir4 : 1; + unsigned int ack_dir5 : 1; + unsigned int ack_bit : 1; + unsigned int start_bit : 1; + unsigned int freq : 2; + unsigned int dummy1 : 5; +} reg_gio_rw_i2c1_ctrl; +#define REG_RD_ADDR_gio_rw_i2c1_ctrl 172 +#define REG_WR_ADDR_gio_rw_i2c1_ctrl 172 + +/* Register rw_i2c1_data, scope gio, type rw */ +typedef struct { + unsigned int data0 : 8; + unsigned int data1 : 8; + unsigned int data2 : 8; + unsigned int data3 : 8; +} reg_gio_rw_i2c1_data; +#define REG_RD_ADDR_gio_rw_i2c1_data 176 +#define REG_WR_ADDR_gio_rw_i2c1_data 176 + +/* Register rw_i2c1_data2, scope gio, type rw */ +typedef struct { + unsigned int data4 : 8; + unsigned int data5 : 8; + unsigned int start_val : 6; + unsigned int ack_val : 6; + unsigned int dummy1 : 4; +} reg_gio_rw_i2c1_data2; +#define REG_RD_ADDR_gio_rw_i2c1_data2 180 +#define REG_WR_ADDR_gio_rw_i2c1_data2 180 + +/* Register r_ppwm_stat, scope gio, type r */ +typedef struct { + unsigned int freq : 2; + unsigned int dummy1 : 30; +} reg_gio_r_ppwm_stat; +#define REG_RD_ADDR_gio_r_ppwm_stat 184 + +/* Register rw_ppwm_data, scope gio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_ppwm_data; +#define REG_RD_ADDR_gio_rw_ppwm_data 188 +#define REG_WR_ADDR_gio_rw_ppwm_data 188 + +/* Register rw_pwm0_ctrl, scope gio, type rw */ +typedef struct { + unsigned int mode : 2; + unsigned int ccd_override : 1; + unsigned int ccd_val : 1; + unsigned int dummy1 : 28; +} reg_gio_rw_pwm0_ctrl; +#define REG_RD_ADDR_gio_rw_pwm0_ctrl 192 +#define REG_WR_ADDR_gio_rw_pwm0_ctrl 192 + +/* Register rw_pwm0_var, scope gio, type rw */ +typedef struct { + unsigned int lo : 13; + unsigned int hi : 13; + unsigned int dummy1 : 6; +} reg_gio_rw_pwm0_var; +#define REG_RD_ADDR_gio_rw_pwm0_var 196 +#define REG_WR_ADDR_gio_rw_pwm0_var 196 + +/* Register rw_pwm0_data, scope gio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pwm0_data; +#define REG_RD_ADDR_gio_rw_pwm0_data 200 +#define REG_WR_ADDR_gio_rw_pwm0_data 200 + +/* Register rw_pwm1_ctrl, scope gio, type rw */ +typedef struct { + unsigned int mode : 2; + unsigned int ccd_override : 1; + unsigned int ccd_val : 1; + unsigned int dummy1 : 28; +} reg_gio_rw_pwm1_ctrl; +#define REG_RD_ADDR_gio_rw_pwm1_ctrl 204 +#define REG_WR_ADDR_gio_rw_pwm1_ctrl 204 + +/* Register rw_pwm1_var, scope gio, type rw */ +typedef struct { + unsigned int lo : 13; + unsigned int hi : 13; + unsigned int dummy1 : 6; +} reg_gio_rw_pwm1_var; +#define REG_RD_ADDR_gio_rw_pwm1_var 208 +#define REG_WR_ADDR_gio_rw_pwm1_var 208 + +/* Register rw_pwm1_data, scope gio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pwm1_data; +#define REG_RD_ADDR_gio_rw_pwm1_data 212 +#define REG_WR_ADDR_gio_rw_pwm1_data 212 + +/* Register rw_pwm2_ctrl, scope gio, type rw */ +typedef struct { + unsigned int mode : 2; + unsigned int ccd_override : 1; + unsigned int ccd_val : 1; + unsigned int dummy1 : 28; +} reg_gio_rw_pwm2_ctrl; +#define REG_RD_ADDR_gio_rw_pwm2_ctrl 216 +#define REG_WR_ADDR_gio_rw_pwm2_ctrl 216 + +/* Register rw_pwm2_var, scope gio, type rw */ +typedef struct { + unsigned int lo : 13; + unsigned int hi : 13; + unsigned int dummy1 : 6; +} reg_gio_rw_pwm2_var; +#define REG_RD_ADDR_gio_rw_pwm2_var 220 +#define REG_WR_ADDR_gio_rw_pwm2_var 220 + +/* Register rw_pwm2_data, scope gio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pwm2_data; +#define REG_RD_ADDR_gio_rw_pwm2_data 224 +#define REG_WR_ADDR_gio_rw_pwm2_data 224 + +/* Register rw_pwm_in_cfg, scope gio, type rw */ +typedef struct { + unsigned int pin : 3; + unsigned int dummy1 : 29; +} reg_gio_rw_pwm_in_cfg; +#define REG_RD_ADDR_gio_rw_pwm_in_cfg 228 +#define REG_WR_ADDR_gio_rw_pwm_in_cfg 228 + +/* Register r_pwm_in_lo, scope gio, type r */ +typedef struct { + unsigned int data : 32; +} reg_gio_r_pwm_in_lo; +#define REG_RD_ADDR_gio_r_pwm_in_lo 232 + +/* Register r_pwm_in_hi, scope gio, type r */ +typedef struct { + unsigned int data : 32; +} reg_gio_r_pwm_in_hi; +#define REG_RD_ADDR_gio_r_pwm_in_hi 236 + +/* Register r_pwm_in_cnt, scope gio, type r */ +typedef struct { + unsigned int data : 32; +} reg_gio_r_pwm_in_cnt; +#define REG_RD_ADDR_gio_r_pwm_in_cnt 240 + + +/* Constants */ +enum { + regk_gio_anyedge = 0x00000007, + regk_gio_f100k = 0x00000000, + regk_gio_f1562 = 0x00000000, + regk_gio_f195 = 0x00000003, + regk_gio_f1m = 0x00000002, + regk_gio_f390 = 0x00000002, + regk_gio_f400k = 0x00000001, + regk_gio_f5m = 0x00000003, + regk_gio_f781 = 0x00000001, + regk_gio_hi = 0x00000001, + regk_gio_in = 0x00000000, + regk_gio_intr_pa0 = 0x00000000, + regk_gio_intr_pa1 = 0x00000000, + regk_gio_intr_pa10 = 0x00000001, + regk_gio_intr_pa11 = 0x00000001, + regk_gio_intr_pa12 = 0x00000001, + regk_gio_intr_pa13 = 0x00000001, + regk_gio_intr_pa14 = 0x00000001, + regk_gio_intr_pa15 = 0x00000001, + regk_gio_intr_pa16 = 0x00000002, + regk_gio_intr_pa17 = 0x00000002, + regk_gio_intr_pa18 = 0x00000002, + regk_gio_intr_pa19 = 0x00000002, + regk_gio_intr_pa2 = 0x00000000, + regk_gio_intr_pa20 = 0x00000002, + regk_gio_intr_pa21 = 0x00000002, + regk_gio_intr_pa22 = 0x00000002, + regk_gio_intr_pa23 = 0x00000002, + regk_gio_intr_pa24 = 0x00000003, + regk_gio_intr_pa25 = 0x00000003, + regk_gio_intr_pa26 = 0x00000003, + regk_gio_intr_pa27 = 0x00000003, + regk_gio_intr_pa28 = 0x00000003, + regk_gio_intr_pa29 = 0x00000003, + regk_gio_intr_pa3 = 0x00000000, + regk_gio_intr_pa30 = 0x00000003, + regk_gio_intr_pa31 = 0x00000003, + regk_gio_intr_pa4 = 0x00000000, + regk_gio_intr_pa5 = 0x00000000, + regk_gio_intr_pa6 = 0x00000000, + regk_gio_intr_pa7 = 0x00000000, + regk_gio_intr_pa8 = 0x00000001, + regk_gio_intr_pa9 = 0x00000001, + regk_gio_intr_pb0 = 0x00000004, + regk_gio_intr_pb1 = 0x00000004, + regk_gio_intr_pb10 = 0x00000005, + regk_gio_intr_pb11 = 0x00000005, + regk_gio_intr_pb12 = 0x00000005, + regk_gio_intr_pb13 = 0x00000005, + regk_gio_intr_pb14 = 0x00000005, + regk_gio_intr_pb15 = 0x00000005, + regk_gio_intr_pb16 = 0x00000006, + regk_gio_intr_pb17 = 0x00000006, + regk_gio_intr_pb18 = 0x00000006, + regk_gio_intr_pb19 = 0x00000006, + regk_gio_intr_pb2 = 0x00000004, + regk_gio_intr_pb20 = 0x00000006, + regk_gio_intr_pb21 = 0x00000006, + regk_gio_intr_pb22 = 0x00000006, + regk_gio_intr_pb23 = 0x00000006, + regk_gio_intr_pb24 = 0x00000007, + regk_gio_intr_pb25 = 0x00000007, + regk_gio_intr_pb26 = 0x00000007, + regk_gio_intr_pb27 = 0x00000007, + regk_gio_intr_pb28 = 0x00000007, + regk_gio_intr_pb29 = 0x00000007, + regk_gio_intr_pb3 = 0x00000004, + regk_gio_intr_pb30 = 0x00000007, + regk_gio_intr_pb31 = 0x00000007, + regk_gio_intr_pb4 = 0x00000004, + regk_gio_intr_pb5 = 0x00000004, + regk_gio_intr_pb6 = 0x00000004, + regk_gio_intr_pb7 = 0x00000004, + regk_gio_intr_pb8 = 0x00000005, + regk_gio_intr_pb9 = 0x00000005, + regk_gio_intr_pc0 = 0x00000008, + regk_gio_intr_pc1 = 0x00000008, + regk_gio_intr_pc10 = 0x00000009, + regk_gio_intr_pc11 = 0x00000009, + regk_gio_intr_pc12 = 0x00000009, + regk_gio_intr_pc13 = 0x00000009, + regk_gio_intr_pc14 = 0x00000009, + regk_gio_intr_pc15 = 0x00000009, + regk_gio_intr_pc2 = 0x00000008, + regk_gio_intr_pc3 = 0x00000008, + regk_gio_intr_pc4 = 0x00000008, + regk_gio_intr_pc5 = 0x00000008, + regk_gio_intr_pc6 = 0x00000008, + regk_gio_intr_pc7 = 0x00000008, + regk_gio_intr_pc8 = 0x00000009, + regk_gio_intr_pc9 = 0x00000009, + regk_gio_intr_pd0 = 0x0000000c, + regk_gio_intr_pd1 = 0x0000000c, + regk_gio_intr_pd10 = 0x0000000d, + regk_gio_intr_pd11 = 0x0000000d, + regk_gio_intr_pd12 = 0x0000000d, + regk_gio_intr_pd13 = 0x0000000d, + regk_gio_intr_pd14 = 0x0000000d, + regk_gio_intr_pd15 = 0x0000000d, + regk_gio_intr_pd16 = 0x0000000e, + regk_gio_intr_pd17 = 0x0000000e, + regk_gio_intr_pd18 = 0x0000000e, + regk_gio_intr_pd19 = 0x0000000e, + regk_gio_intr_pd2 = 0x0000000c, + regk_gio_intr_pd20 = 0x0000000e, + regk_gio_intr_pd21 = 0x0000000e, + regk_gio_intr_pd22 = 0x0000000e, + regk_gio_intr_pd23 = 0x0000000e, + regk_gio_intr_pd24 = 0x0000000f, + regk_gio_intr_pd25 = 0x0000000f, + regk_gio_intr_pd26 = 0x0000000f, + regk_gio_intr_pd27 = 0x0000000f, + regk_gio_intr_pd28 = 0x0000000f, + regk_gio_intr_pd29 = 0x0000000f, + regk_gio_intr_pd3 = 0x0000000c, + regk_gio_intr_pd30 = 0x0000000f, + regk_gio_intr_pd31 = 0x0000000f, + regk_gio_intr_pd4 = 0x0000000c, + regk_gio_intr_pd5 = 0x0000000c, + regk_gio_intr_pd6 = 0x0000000c, + regk_gio_intr_pd7 = 0x0000000c, + regk_gio_intr_pd8 = 0x0000000d, + regk_gio_intr_pd9 = 0x0000000d, + regk_gio_lo = 0x00000002, + regk_gio_lsb = 0x00000000, + regk_gio_msb = 0x00000001, + regk_gio_negedge = 0x00000006, + regk_gio_no = 0x00000000, + regk_gio_no_switch = 0x0000003f, + regk_gio_none = 0x00000007, + regk_gio_off = 0x00000000, + regk_gio_opendrain = 0x00000000, + regk_gio_out = 0x00000001, + regk_gio_posedge = 0x00000005, + regk_gio_pwm_hfp = 0x00000002, + regk_gio_pwm_pa0 = 0x00000001, + regk_gio_pwm_pa19 = 0x00000004, + regk_gio_pwm_pa6 = 0x00000002, + regk_gio_pwm_pa7 = 0x00000003, + regk_gio_pwm_pb26 = 0x00000005, + regk_gio_pwm_pd23 = 0x00000006, + regk_gio_pwm_pd31 = 0x00000007, + regk_gio_pwm_std = 0x00000001, + regk_gio_pwm_var = 0x00000003, + regk_gio_rw_i2c0_cfg_default = 0x00000020, + regk_gio_rw_i2c0_ctrl_default = 0x00010000, + regk_gio_rw_i2c0_start_default = 0x00000000, + regk_gio_rw_i2c1_cfg_default = 0x00000aa0, + regk_gio_rw_i2c1_ctrl_default = 0x00010000, + regk_gio_rw_i2c1_start_default = 0x00000000, + regk_gio_rw_intr_cfg_default = 0x00000000, + regk_gio_rw_intr_mask_default = 0x00000000, + regk_gio_rw_pa_oe_default = 0x00000000, + regk_gio_rw_pb_oe_default = 0x00000000, + regk_gio_rw_pc_oe_default = 0x00000000, + regk_gio_rw_ppwm_data_default = 0x00000000, + regk_gio_rw_pwm0_ctrl_default = 0x00000000, + regk_gio_rw_pwm1_ctrl_default = 0x00000000, + regk_gio_rw_pwm2_ctrl_default = 0x00000000, + regk_gio_rw_pwm_in_cfg_default = 0x00000000, + regk_gio_sda0 = 0x00000000, + regk_gio_sda1 = 0x00000001, + regk_gio_sda2 = 0x00000002, + regk_gio_sda3 = 0x00000003, + regk_gio_sen = 0x00000000, + regk_gio_set = 0x00000003, + regk_gio_yes = 0x00000001 +}; +#endif /* __gio_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/intr_vect.h b/include/asm-cris/arch-v32/mach-a3/hwregs/intr_vect.h new file mode 100644 index 000000000000..bea699aa480e --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/intr_vect.h @@ -0,0 +1,46 @@ +/* Interrupt vector numbers autogenerated by ../../../tools/rdesc/bin/rdes2intr + from intr_vect.r */ + +#ifndef _INTR_VECT_R +#define _INTR_VECT_R +#define TIMER0_INTR_VECT 0x31 +#define TIMER1_INTR_VECT 0x32 +#define DMA0_INTR_VECT 0x33 +#define DMA1_INTR_VECT 0x34 +#define DMA2_INTR_VECT 0x35 +#define DMA3_INTR_VECT 0x36 +#define DMA4_INTR_VECT 0x37 +#define DMA5_INTR_VECT 0x38 +#define DMA6_INTR_VECT 0x39 +#define DMA7_INTR_VECT 0x3a +#define DMA9_INTR_VECT 0x3b +#define DMA11_INTR_VECT 0x3c +#define GIO_INTR_VECT 0x3d +#define IOP0_INTR_VECT 0x3e +#define IOP1_INTR_VECT 0x3f +#define SER0_INTR_VECT 0x40 +#define SER1_INTR_VECT 0x41 +#define SER2_INTR_VECT 0x42 +#define SER3_INTR_VECT 0x43 +#define SER4_INTR_VECT 0x44 +#define SSER_INTR_VECT 0x45 +#define STRDMA0_INTR_VECT 0x46 +#define STRDMA1_INTR_VECT 0x47 +#define STRDMA2_INTR_VECT 0x48 +#define STRDMA3_INTR_VECT 0x49 +#define STRDMA5_INTR_VECT 0x4a +#define VIN_INTR_VECT 0x4b +#define VOUT_INTR_VECT 0x4c +#define JPEG_INTR_VECT 0x4d +#define H264_INTR_VECT 0x4e +#define HISTO_INTR_VECT 0x4f +#define CCD_INTR_VECT 0x50 +#define ETH_INTR_VECT 0x51 +#define MEMARB_BAR_INTR_VECT 0x52 +#define MEMARB_FOO_INTR_VECT 0x53 +#define PIO_INTR_VECT 0x54 +#define SCLR_INTR_VECT 0x55 +#define SCLR_FIFO_INTR_VECT 0x56 +#define IPI_INTR_VECT 0x57 +#define NBR_INTR_VECT 0x58 +#endif diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/intr_vect_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/intr_vect_defs.h new file mode 100644 index 000000000000..b820f6347c74 --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/intr_vect_defs.h @@ -0,0 +1,341 @@ +#ifndef __intr_vect_defs_h +#define __intr_vect_defs_h + +/* + * This file is autogenerated from + * file: intr_vect.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile intr_vect_defs.h intr_vect.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope intr_vect */ + + +#define STRIDE_intr_vect_rw_mask 4 +/* Register rw_mask0, scope intr_vect, type rw */ +typedef struct { + unsigned int timer0 : 1; + unsigned int timer1 : 1; + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma9 : 1; + unsigned int dma11 : 1; + unsigned int gio : 1; + unsigned int iop0 : 1; + unsigned int iop1 : 1; + unsigned int ser0 : 1; + unsigned int ser1 : 1; + unsigned int ser2 : 1; + unsigned int ser3 : 1; + unsigned int ser4 : 1; + unsigned int sser : 1; + unsigned int strdma0 : 1; + unsigned int strdma1 : 1; + unsigned int strdma2 : 1; + unsigned int strdma3 : 1; + unsigned int strdma5 : 1; + unsigned int vin : 1; + unsigned int vout : 1; + unsigned int jpeg : 1; + unsigned int h264 : 1; + unsigned int histo : 1; + unsigned int ccd : 1; +} reg_intr_vect_rw_mask0; +#define reg_intr_vect_rw_mask reg_intr_vect_rw_mask0 +#define REG_RD_ADDR_intr_vect_rw_mask 0 +#define REG_WR_ADDR_intr_vect_rw_mask 0 +#define REG_RD_ADDR_intr_vect_rw_mask0 0 +#define REG_WR_ADDR_intr_vect_rw_mask0 0 + +#define STRIDE_intr_vect_r_vect 4 +/* Register r_vect0, scope intr_vect, type r */ +typedef struct { + unsigned int timer0 : 1; + unsigned int timer1 : 1; + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma9 : 1; + unsigned int dma11 : 1; + unsigned int gio : 1; + unsigned int iop0 : 1; + unsigned int iop1 : 1; + unsigned int ser0 : 1; + unsigned int ser1 : 1; + unsigned int ser2 : 1; + unsigned int ser3 : 1; + unsigned int ser4 : 1; + unsigned int sser : 1; + unsigned int strdma0 : 1; + unsigned int strdma1 : 1; + unsigned int strdma2 : 1; + unsigned int strdma3 : 1; + unsigned int strdma5 : 1; + unsigned int vin : 1; + unsigned int vout : 1; + unsigned int jpeg : 1; + unsigned int h264 : 1; + unsigned int histo : 1; + unsigned int ccd : 1; +} reg_intr_vect_r_vect0; +#define reg_intr_vect_r_vect reg_intr_vect_r_vect0 +#define REG_RD_ADDR_intr_vect_r_vect 8 +#define REG_RD_ADDR_intr_vect_r_vect0 8 + +#define STRIDE_intr_vect_r_masked_vect 4 +/* Register r_masked_vect0, scope intr_vect, type r */ +typedef struct { + unsigned int timer0 : 1; + unsigned int timer1 : 1; + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma9 : 1; + unsigned int dma11 : 1; + unsigned int gio : 1; + unsigned int iop0 : 1; + unsigned int iop1 : 1; + unsigned int ser0 : 1; + unsigned int ser1 : 1; + unsigned int ser2 : 1; + unsigned int ser3 : 1; + unsigned int ser4 : 1; + unsigned int sser : 1; + unsigned int strdma0 : 1; + unsigned int strdma1 : 1; + unsigned int strdma2 : 1; + unsigned int strdma3 : 1; + unsigned int strdma5 : 1; + unsigned int vin : 1; + unsigned int vout : 1; + unsigned int jpeg : 1; + unsigned int h264 : 1; + unsigned int histo : 1; + unsigned int ccd : 1; +} reg_intr_vect_r_masked_vect0; +#define reg_intr_vect_r_masked_vect reg_intr_masked_vect_r_vect0 +#define REG_RD_ADDR_intr_vect_r_masked_vect0 16 +#define REG_RD_ADDR_intr_vect_r_masked_vect 16 + +#define STRIDE_intr_vect_rw_xmask 4 +/* Register rw_xmask0, scope intr_vect, type rw */ +typedef struct { + unsigned int timer0 : 1; + unsigned int timer1 : 1; + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma9 : 1; + unsigned int dma11 : 1; + unsigned int gio : 1; + unsigned int iop0 : 1; + unsigned int iop1 : 1; + unsigned int ser0 : 1; + unsigned int ser1 : 1; + unsigned int ser2 : 1; + unsigned int ser3 : 1; + unsigned int ser4 : 1; + unsigned int sser : 1; + unsigned int strdma0 : 1; + unsigned int strdma1 : 1; + unsigned int strdma2 : 1; + unsigned int strdma3 : 1; + unsigned int strdma5 : 1; + unsigned int vin : 1; + unsigned int vout : 1; + unsigned int jpeg : 1; + unsigned int h264 : 1; + unsigned int histo : 1; + unsigned int ccd : 1; +} reg_intr_vect_rw_xmask0; +#define reg_intr_vect_rw_xmask reg_intr_vect_rw_xmask0 +#define REG_RD_ADDR_intr_vect_rw_xmask0 24 +#define REG_WR_ADDR_intr_vect_rw_xmask0 24 +#define REG_RD_ADDR_intr_vect_rw_xmask 24 +#define REG_WR_ADDR_intr_vect_rw_xmask 24 + +/* Register rw_mask1, scope intr_vect, type rw */ +typedef struct { + unsigned int eth : 1; + unsigned int memarb_bar : 1; + unsigned int memarb_foo : 1; + unsigned int pio : 1; + unsigned int sclr : 1; + unsigned int sclr_fifo : 1; + unsigned int dummy1 : 26; +} reg_intr_vect_rw_mask1; +#define REG_RD_ADDR_intr_vect_rw_mask1 4 +#define REG_WR_ADDR_intr_vect_rw_mask1 4 + +/* Register r_vect1, scope intr_vect, type r */ +typedef struct { + unsigned int eth : 1; + unsigned int memarb_bar : 1; + unsigned int memarb_foo : 1; + unsigned int pio : 1; + unsigned int sclr : 1; + unsigned int sclr_fifo : 1; + unsigned int dummy1 : 26; +} reg_intr_vect_r_vect1; +#define REG_RD_ADDR_intr_vect_r_vect1 12 + +/* Register r_masked_vect1, scope intr_vect, type r */ +typedef struct { + unsigned int eth : 1; + unsigned int memarb_bar : 1; + unsigned int memarb_foo : 1; + unsigned int pio : 1; + unsigned int sclr : 1; + unsigned int sclr_fifo : 1; + unsigned int dummy1 : 26; +} reg_intr_vect_r_masked_vect1; +#define REG_RD_ADDR_intr_vect_r_masked_vect1 20 + +/* Register rw_xmask1, scope intr_vect, type rw */ +typedef struct { + unsigned int eth : 1; + unsigned int memarb_bar : 1; + unsigned int memarb_foo : 1; + unsigned int pio : 1; + unsigned int sclr : 1; + unsigned int sclr_fifo : 1; + unsigned int dummy1 : 26; +} reg_intr_vect_rw_xmask1; +#define REG_RD_ADDR_intr_vect_rw_xmask1 28 +#define REG_WR_ADDR_intr_vect_rw_xmask1 28 + +/* Register rw_xmask_ctrl, scope intr_vect, type rw */ +typedef struct { + unsigned int en : 1; + unsigned int dummy1 : 31; +} reg_intr_vect_rw_xmask_ctrl; +#define REG_RD_ADDR_intr_vect_rw_xmask_ctrl 32 +#define REG_WR_ADDR_intr_vect_rw_xmask_ctrl 32 + +/* Register r_nmi, scope intr_vect, type r */ +typedef struct { + unsigned int watchdog0 : 1; + unsigned int watchdog1 : 1; + unsigned int dummy1 : 30; +} reg_intr_vect_r_nmi; +#define REG_RD_ADDR_intr_vect_r_nmi 64 + +/* Register r_guru, scope intr_vect, type r */ +typedef struct { + unsigned int jtag : 1; + unsigned int dummy1 : 31; +} reg_intr_vect_r_guru; +#define REG_RD_ADDR_intr_vect_r_guru 68 + + +/* Register rw_ipi, scope intr_vect, type rw */ +typedef struct +{ + unsigned int vector; +} reg_intr_vect_rw_ipi; +#define REG_RD_ADDR_intr_vect_rw_ipi 72 +#define REG_WR_ADDR_intr_vect_rw_ipi 72 + +/* Constants */ +enum { + regk_intr_vect_no = 0x00000000, + regk_intr_vect_rw_mask0_default = 0x00000000, + regk_intr_vect_rw_mask1_default = 0x00000000, + regk_intr_vect_rw_xmask0_default = 0x00000000, + regk_intr_vect_rw_xmask1_default = 0x00000000, + regk_intr_vect_rw_xmask_ctrl_default = 0x00000000, + regk_intr_vect_yes = 0x00000001 +}; +#endif /* __intr_vect_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_reg_space_asm.h b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_reg_space_asm.h new file mode 100644 index 000000000000..d75a74e90458 --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_reg_space_asm.h @@ -0,0 +1,31 @@ +/* Autogenerated Changes here will be lost! + * generated by ./gen_sw.pl Wed Feb 14 09:27:48 2007 iop_sw.cfg + */ +#define iop_version 0 +#define iop_fifo_in_extra 64 +#define iop_fifo_out_extra 128 +#define iop_trigger_grp0 192 +#define iop_trigger_grp1 256 +#define iop_trigger_grp2 320 +#define iop_trigger_grp3 384 +#define iop_trigger_grp4 448 +#define iop_trigger_grp5 512 +#define iop_trigger_grp6 576 +#define iop_trigger_grp7 640 +#define iop_crc_par 768 +#define iop_dmc_in 896 +#define iop_dmc_out 1024 +#define iop_fifo_in 1152 +#define iop_fifo_out 1280 +#define iop_scrc_in 1408 +#define iop_scrc_out 1536 +#define iop_timer_grp0 1664 +#define iop_timer_grp1 1792 +#define iop_sap_in 2048 +#define iop_sap_out 2304 +#define iop_spu 2560 +#define iop_sw_cfg 2816 +#define iop_sw_cpu 3072 +#define iop_sw_mpu 3328 +#define iop_sw_spu 3584 +#define iop_mpu 4096 diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sap_in_defs_asm.h b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sap_in_defs_asm.h new file mode 100644 index 000000000000..7f90b5a0460d --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sap_in_defs_asm.h @@ -0,0 +1,109 @@ +#ifndef __iop_sap_in_defs_asm_h +#define __iop_sap_in_defs_asm_h + +/* + * This file is autogenerated from + * file: iop_sap_in.r + * + * by ../../../tools/rdesc/bin/rdes2c -asm -outfile iop_sap_in_defs_asm.h iop_sap_in.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +#define STRIDE_iop_sap_in_rw_bus_byte 4 +/* Register rw_bus_byte, scope iop_sap_in, type rw */ +#define reg_iop_sap_in_rw_bus_byte___sync_sel___lsb 0 +#define reg_iop_sap_in_rw_bus_byte___sync_sel___width 2 +#define reg_iop_sap_in_rw_bus_byte___sync_ext_src___lsb 2 +#define reg_iop_sap_in_rw_bus_byte___sync_ext_src___width 3 +#define reg_iop_sap_in_rw_bus_byte___sync_edge___lsb 5 +#define reg_iop_sap_in_rw_bus_byte___sync_edge___width 2 +#define reg_iop_sap_in_rw_bus_byte___delay___lsb 7 +#define reg_iop_sap_in_rw_bus_byte___delay___width 2 +#define reg_iop_sap_in_rw_bus_byte_offset 0 + +#define STRIDE_iop_sap_in_rw_gio 4 +/* Register rw_gio, scope iop_sap_in, type rw */ +#define reg_iop_sap_in_rw_gio___sync_sel___lsb 0 +#define reg_iop_sap_in_rw_gio___sync_sel___width 2 +#define reg_iop_sap_in_rw_gio___sync_ext_src___lsb 2 +#define reg_iop_sap_in_rw_gio___sync_ext_src___width 3 +#define reg_iop_sap_in_rw_gio___sync_edge___lsb 5 +#define reg_iop_sap_in_rw_gio___sync_edge___width 2 +#define reg_iop_sap_in_rw_gio___delay___lsb 7 +#define reg_iop_sap_in_rw_gio___delay___width 2 +#define reg_iop_sap_in_rw_gio___logic___lsb 9 +#define reg_iop_sap_in_rw_gio___logic___width 2 +#define reg_iop_sap_in_rw_gio_offset 16 + + +/* Constants */ +#define regk_iop_sap_in_and 0x00000002 +#define regk_iop_sap_in_ext_clk200 0x00000003 +#define regk_iop_sap_in_gio0 0x00000000 +#define regk_iop_sap_in_gio12 0x00000003 +#define regk_iop_sap_in_gio16 0x00000004 +#define regk_iop_sap_in_gio20 0x00000005 +#define regk_iop_sap_in_gio24 0x00000006 +#define regk_iop_sap_in_gio28 0x00000007 +#define regk_iop_sap_in_gio4 0x00000001 +#define regk_iop_sap_in_gio8 0x00000002 +#define regk_iop_sap_in_inv 0x00000001 +#define regk_iop_sap_in_neg 0x00000002 +#define regk_iop_sap_in_no 0x00000000 +#define regk_iop_sap_in_no_del_ext_clk200 0x00000002 +#define regk_iop_sap_in_none 0x00000000 +#define regk_iop_sap_in_one 0x00000001 +#define regk_iop_sap_in_or 0x00000003 +#define regk_iop_sap_in_pos 0x00000001 +#define regk_iop_sap_in_pos_neg 0x00000003 +#define regk_iop_sap_in_rw_bus_byte_default 0x00000000 +#define regk_iop_sap_in_rw_bus_byte_size 0x00000004 +#define regk_iop_sap_in_rw_gio_default 0x00000000 +#define regk_iop_sap_in_rw_gio_size 0x00000020 +#define regk_iop_sap_in_timer_grp0_tmr3 0x00000000 +#define regk_iop_sap_in_timer_grp1_tmr3 0x00000001 +#define regk_iop_sap_in_tmr_clk200 0x00000001 +#define regk_iop_sap_in_two 0x00000002 +#define regk_iop_sap_in_two_clk200 0x00000000 +#endif /* __iop_sap_in_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sap_out_defs_asm.h b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sap_out_defs_asm.h new file mode 100644 index 000000000000..399bd656406b --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sap_out_defs_asm.h @@ -0,0 +1,276 @@ +#ifndef __iop_sap_out_defs_asm_h +#define __iop_sap_out_defs_asm_h + +/* + * This file is autogenerated from + * file: iop_sap_out.r + * + * by ../../../tools/rdesc/bin/rdes2c -asm -outfile iop_sap_out_defs_asm.h iop_sap_out.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_gen_gated, scope iop_sap_out, type rw */ +#define reg_iop_sap_out_rw_gen_gated___clk0_src___lsb 0 +#define reg_iop_sap_out_rw_gen_gated___clk0_src___width 2 +#define reg_iop_sap_out_rw_gen_gated___clk0_gate_src___lsb 2 +#define reg_iop_sap_out_rw_gen_gated___clk0_gate_src___width 2 +#define reg_iop_sap_out_rw_gen_gated___clk0_force_src___lsb 4 +#define reg_iop_sap_out_rw_gen_gated___clk0_force_src___width 3 +#define reg_iop_sap_out_rw_gen_gated___clk1_src___lsb 7 +#define reg_iop_sap_out_rw_gen_gated___clk1_src___width 2 +#define reg_iop_sap_out_rw_gen_gated___clk1_gate_src___lsb 9 +#define reg_iop_sap_out_rw_gen_gated___clk1_gate_src___width 2 +#define reg_iop_sap_out_rw_gen_gated___clk1_force_src___lsb 11 +#define reg_iop_sap_out_rw_gen_gated___clk1_force_src___width 3 +#define reg_iop_sap_out_rw_gen_gated_offset 0 + +/* Register rw_bus, scope iop_sap_out, type rw */ +#define reg_iop_sap_out_rw_bus___byte0_clk_sel___lsb 0 +#define reg_iop_sap_out_rw_bus___byte0_clk_sel___width 2 +#define reg_iop_sap_out_rw_bus___byte0_clk_ext___lsb 2 +#define reg_iop_sap_out_rw_bus___byte0_clk_ext___width 2 +#define reg_iop_sap_out_rw_bus___byte0_gated_clk___lsb 4 +#define reg_iop_sap_out_rw_bus___byte0_gated_clk___width 1 +#define reg_iop_sap_out_rw_bus___byte0_gated_clk___bit 4 +#define reg_iop_sap_out_rw_bus___byte0_clk_inv___lsb 5 +#define reg_iop_sap_out_rw_bus___byte0_clk_inv___width 1 +#define reg_iop_sap_out_rw_bus___byte0_clk_inv___bit 5 +#define reg_iop_sap_out_rw_bus___byte0_delay___lsb 6 +#define reg_iop_sap_out_rw_bus___byte0_delay___width 1 +#define reg_iop_sap_out_rw_bus___byte0_delay___bit 6 +#define reg_iop_sap_out_rw_bus___byte1_clk_sel___lsb 7 +#define reg_iop_sap_out_rw_bus___byte1_clk_sel___width 2 +#define reg_iop_sap_out_rw_bus___byte1_clk_ext___lsb 9 +#define reg_iop_sap_out_rw_bus___byte1_clk_ext___width 2 +#define reg_iop_sap_out_rw_bus___byte1_gated_clk___lsb 11 +#define reg_iop_sap_out_rw_bus___byte1_gated_clk___width 1 +#define reg_iop_sap_out_rw_bus___byte1_gated_clk___bit 11 +#define reg_iop_sap_out_rw_bus___byte1_clk_inv___lsb 12 +#define reg_iop_sap_out_rw_bus___byte1_clk_inv___width 1 +#define reg_iop_sap_out_rw_bus___byte1_clk_inv___bit 12 +#define reg_iop_sap_out_rw_bus___byte1_delay___lsb 13 +#define reg_iop_sap_out_rw_bus___byte1_delay___width 1 +#define reg_iop_sap_out_rw_bus___byte1_delay___bit 13 +#define reg_iop_sap_out_rw_bus___byte2_clk_sel___lsb 14 +#define reg_iop_sap_out_rw_bus___byte2_clk_sel___width 2 +#define reg_iop_sap_out_rw_bus___byte2_clk_ext___lsb 16 +#define reg_iop_sap_out_rw_bus___byte2_clk_ext___width 2 +#define reg_iop_sap_out_rw_bus___byte2_gated_clk___lsb 18 +#define reg_iop_sap_out_rw_bus___byte2_gated_clk___width 1 +#define reg_iop_sap_out_rw_bus___byte2_gated_clk___bit 18 +#define reg_iop_sap_out_rw_bus___byte2_clk_inv___lsb 19 +#define reg_iop_sap_out_rw_bus___byte2_clk_inv___width 1 +#define reg_iop_sap_out_rw_bus___byte2_clk_inv___bit 19 +#define reg_iop_sap_out_rw_bus___byte2_delay___lsb 20 +#define reg_iop_sap_out_rw_bus___byte2_delay___width 1 +#define reg_iop_sap_out_rw_bus___byte2_delay___bit 20 +#define reg_iop_sap_out_rw_bus___byte3_clk_sel___lsb 21 +#define reg_iop_sap_out_rw_bus___byte3_clk_sel___width 2 +#define reg_iop_sap_out_rw_bus___byte3_clk_ext___lsb 23 +#define reg_iop_sap_out_rw_bus___byte3_clk_ext___width 2 +#define reg_iop_sap_out_rw_bus___byte3_gated_clk___lsb 25 +#define reg_iop_sap_out_rw_bus___byte3_gated_clk___width 1 +#define reg_iop_sap_out_rw_bus___byte3_gated_clk___bit 25 +#define reg_iop_sap_out_rw_bus___byte3_clk_inv___lsb 26 +#define reg_iop_sap_out_rw_bus___byte3_clk_inv___width 1 +#define reg_iop_sap_out_rw_bus___byte3_clk_inv___bit 26 +#define reg_iop_sap_out_rw_bus___byte3_delay___lsb 27 +#define reg_iop_sap_out_rw_bus___byte3_delay___width 1 +#define reg_iop_sap_out_rw_bus___byte3_delay___bit 27 +#define reg_iop_sap_out_rw_bus_offset 4 + +/* Register rw_bus_lo_oe, scope iop_sap_out, type rw */ +#define reg_iop_sap_out_rw_bus_lo_oe___byte0_clk_sel___lsb 0 +#define reg_iop_sap_out_rw_bus_lo_oe___byte0_clk_sel___width 2 +#define reg_iop_sap_out_rw_bus_lo_oe___byte0_clk_ext___lsb 2 +#define reg_iop_sap_out_rw_bus_lo_oe___byte0_clk_ext___width 2 +#define reg_iop_sap_out_rw_bus_lo_oe___byte0_gated_clk___lsb 4 +#define reg_iop_sap_out_rw_bus_lo_oe___byte0_gated_clk___width 1 +#define reg_iop_sap_out_rw_bus_lo_oe___byte0_gated_clk___bit 4 +#define reg_iop_sap_out_rw_bus_lo_oe___byte0_clk_inv___lsb 5 +#define reg_iop_sap_out_rw_bus_lo_oe___byte0_clk_inv___width 1 +#define reg_iop_sap_out_rw_bus_lo_oe___byte0_clk_inv___bit 5 +#define reg_iop_sap_out_rw_bus_lo_oe___byte0_delay___lsb 6 +#define reg_iop_sap_out_rw_bus_lo_oe___byte0_delay___width 1 +#define reg_iop_sap_out_rw_bus_lo_oe___byte0_delay___bit 6 +#define reg_iop_sap_out_rw_bus_lo_oe___byte0_logic___lsb 7 +#define reg_iop_sap_out_rw_bus_lo_oe___byte0_logic___width 2 +#define reg_iop_sap_out_rw_bus_lo_oe___byte0_logic_src___lsb 9 +#define reg_iop_sap_out_rw_bus_lo_oe___byte0_logic_src___width 2 +#define reg_iop_sap_out_rw_bus_lo_oe___byte1_clk_sel___lsb 11 +#define reg_iop_sap_out_rw_bus_lo_oe___byte1_clk_sel___width 2 +#define reg_iop_sap_out_rw_bus_lo_oe___byte1_clk_ext___lsb 13 +#define reg_iop_sap_out_rw_bus_lo_oe___byte1_clk_ext___width 2 +#define reg_iop_sap_out_rw_bus_lo_oe___byte1_gated_clk___lsb 15 +#define reg_iop_sap_out_rw_bus_lo_oe___byte1_gated_clk___width 1 +#define reg_iop_sap_out_rw_bus_lo_oe___byte1_gated_clk___bit 15 +#define reg_iop_sap_out_rw_bus_lo_oe___byte1_clk_inv___lsb 16 +#define reg_iop_sap_out_rw_bus_lo_oe___byte1_clk_inv___width 1 +#define reg_iop_sap_out_rw_bus_lo_oe___byte1_clk_inv___bit 16 +#define reg_iop_sap_out_rw_bus_lo_oe___byte1_delay___lsb 17 +#define reg_iop_sap_out_rw_bus_lo_oe___byte1_delay___width 1 +#define reg_iop_sap_out_rw_bus_lo_oe___byte1_delay___bit 17 +#define reg_iop_sap_out_rw_bus_lo_oe___byte1_logic___lsb 18 +#define reg_iop_sap_out_rw_bus_lo_oe___byte1_logic___width 2 +#define reg_iop_sap_out_rw_bus_lo_oe___byte1_logic_src___lsb 20 +#define reg_iop_sap_out_rw_bus_lo_oe___byte1_logic_src___width 2 +#define reg_iop_sap_out_rw_bus_lo_oe_offset 8 + +/* Register rw_bus_hi_oe, scope iop_sap_out, type rw */ +#define reg_iop_sap_out_rw_bus_hi_oe___byte2_clk_sel___lsb 0 +#define reg_iop_sap_out_rw_bus_hi_oe___byte2_clk_sel___width 2 +#define reg_iop_sap_out_rw_bus_hi_oe___byte2_clk_ext___lsb 2 +#define reg_iop_sap_out_rw_bus_hi_oe___byte2_clk_ext___width 2 +#define reg_iop_sap_out_rw_bus_hi_oe___byte2_gated_clk___lsb 4 +#define reg_iop_sap_out_rw_bus_hi_oe___byte2_gated_clk___width 1 +#define reg_iop_sap_out_rw_bus_hi_oe___byte2_gated_clk___bit 4 +#define reg_iop_sap_out_rw_bus_hi_oe___byte2_clk_inv___lsb 5 +#define reg_iop_sap_out_rw_bus_hi_oe___byte2_clk_inv___width 1 +#define reg_iop_sap_out_rw_bus_hi_oe___byte2_clk_inv___bit 5 +#define reg_iop_sap_out_rw_bus_hi_oe___byte2_delay___lsb 6 +#define reg_iop_sap_out_rw_bus_hi_oe___byte2_delay___width 1 +#define reg_iop_sap_out_rw_bus_hi_oe___byte2_delay___bit 6 +#define reg_iop_sap_out_rw_bus_hi_oe___byte2_logic___lsb 7 +#define reg_iop_sap_out_rw_bus_hi_oe___byte2_logic___width 2 +#define reg_iop_sap_out_rw_bus_hi_oe___byte2_logic_src___lsb 9 +#define reg_iop_sap_out_rw_bus_hi_oe___byte2_logic_src___width 2 +#define reg_iop_sap_out_rw_bus_hi_oe___byte3_clk_sel___lsb 11 +#define reg_iop_sap_out_rw_bus_hi_oe___byte3_clk_sel___width 2 +#define reg_iop_sap_out_rw_bus_hi_oe___byte3_clk_ext___lsb 13 +#define reg_iop_sap_out_rw_bus_hi_oe___byte3_clk_ext___width 2 +#define reg_iop_sap_out_rw_bus_hi_oe___byte3_gated_clk___lsb 15 +#define reg_iop_sap_out_rw_bus_hi_oe___byte3_gated_clk___width 1 +#define reg_iop_sap_out_rw_bus_hi_oe___byte3_gated_clk___bit 15 +#define reg_iop_sap_out_rw_bus_hi_oe___byte3_clk_inv___lsb 16 +#define reg_iop_sap_out_rw_bus_hi_oe___byte3_clk_inv___width 1 +#define reg_iop_sap_out_rw_bus_hi_oe___byte3_clk_inv___bit 16 +#define reg_iop_sap_out_rw_bus_hi_oe___byte3_delay___lsb 17 +#define reg_iop_sap_out_rw_bus_hi_oe___byte3_delay___width 1 +#define reg_iop_sap_out_rw_bus_hi_oe___byte3_delay___bit 17 +#define reg_iop_sap_out_rw_bus_hi_oe___byte3_logic___lsb 18 +#define reg_iop_sap_out_rw_bus_hi_oe___byte3_logic___width 2 +#define reg_iop_sap_out_rw_bus_hi_oe___byte3_logic_src___lsb 20 +#define reg_iop_sap_out_rw_bus_hi_oe___byte3_logic_src___width 2 +#define reg_iop_sap_out_rw_bus_hi_oe_offset 12 + +#define STRIDE_iop_sap_out_rw_gio 4 +/* Register rw_gio, scope iop_sap_out, type rw */ +#define reg_iop_sap_out_rw_gio___out_clk_sel___lsb 0 +#define reg_iop_sap_out_rw_gio___out_clk_sel___width 3 +#define reg_iop_sap_out_rw_gio___out_clk_ext___lsb 3 +#define reg_iop_sap_out_rw_gio___out_clk_ext___width 2 +#define reg_iop_sap_out_rw_gio___out_gated_clk___lsb 5 +#define reg_iop_sap_out_rw_gio___out_gated_clk___width 1 +#define reg_iop_sap_out_rw_gio___out_gated_clk___bit 5 +#define reg_iop_sap_out_rw_gio___out_clk_inv___lsb 6 +#define reg_iop_sap_out_rw_gio___out_clk_inv___width 1 +#define reg_iop_sap_out_rw_gio___out_clk_inv___bit 6 +#define reg_iop_sap_out_rw_gio___out_delay___lsb 7 +#define reg_iop_sap_out_rw_gio___out_delay___width 1 +#define reg_iop_sap_out_rw_gio___out_delay___bit 7 +#define reg_iop_sap_out_rw_gio___out_logic___lsb 8 +#define reg_iop_sap_out_rw_gio___out_logic___width 2 +#define reg_iop_sap_out_rw_gio___out_logic_src___lsb 10 +#define reg_iop_sap_out_rw_gio___out_logic_src___width 2 +#define reg_iop_sap_out_rw_gio___oe_clk_sel___lsb 12 +#define reg_iop_sap_out_rw_gio___oe_clk_sel___width 3 +#define reg_iop_sap_out_rw_gio___oe_clk_ext___lsb 15 +#define reg_iop_sap_out_rw_gio___oe_clk_ext___width 2 +#define reg_iop_sap_out_rw_gio___oe_gated_clk___lsb 17 +#define reg_iop_sap_out_rw_gio___oe_gated_clk___width 1 +#define reg_iop_sap_out_rw_gio___oe_gated_clk___bit 17 +#define reg_iop_sap_out_rw_gio___oe_clk_inv___lsb 18 +#define reg_iop_sap_out_rw_gio___oe_clk_inv___width 1 +#define reg_iop_sap_out_rw_gio___oe_clk_inv___bit 18 +#define reg_iop_sap_out_rw_gio___oe_delay___lsb 19 +#define reg_iop_sap_out_rw_gio___oe_delay___width 1 +#define reg_iop_sap_out_rw_gio___oe_delay___bit 19 +#define reg_iop_sap_out_rw_gio___oe_logic___lsb 20 +#define reg_iop_sap_out_rw_gio___oe_logic___width 2 +#define reg_iop_sap_out_rw_gio___oe_logic_src___lsb 22 +#define reg_iop_sap_out_rw_gio___oe_logic_src___width 2 +#define reg_iop_sap_out_rw_gio_offset 16 + + +/* Constants */ +#define regk_iop_sap_out_always 0x00000001 +#define regk_iop_sap_out_and 0x00000002 +#define regk_iop_sap_out_clk0 0x00000000 +#define regk_iop_sap_out_clk1 0x00000001 +#define regk_iop_sap_out_clk12 0x00000004 +#define regk_iop_sap_out_clk200 0x00000000 +#define regk_iop_sap_out_ext 0x00000002 +#define regk_iop_sap_out_gated 0x00000003 +#define regk_iop_sap_out_gio0 0x00000000 +#define regk_iop_sap_out_gio1 0x00000000 +#define regk_iop_sap_out_gio16 0x00000002 +#define regk_iop_sap_out_gio17 0x00000002 +#define regk_iop_sap_out_gio24 0x00000003 +#define regk_iop_sap_out_gio25 0x00000003 +#define regk_iop_sap_out_gio8 0x00000001 +#define regk_iop_sap_out_gio9 0x00000001 +#define regk_iop_sap_out_gio_out10 0x00000005 +#define regk_iop_sap_out_gio_out18 0x00000006 +#define regk_iop_sap_out_gio_out2 0x00000004 +#define regk_iop_sap_out_gio_out26 0x00000007 +#define regk_iop_sap_out_inv 0x00000001 +#define regk_iop_sap_out_nand 0x00000003 +#define regk_iop_sap_out_no 0x00000000 +#define regk_iop_sap_out_none 0x00000000 +#define regk_iop_sap_out_one 0x00000001 +#define regk_iop_sap_out_rw_bus_default 0x00000000 +#define regk_iop_sap_out_rw_bus_hi_oe_default 0x00000000 +#define regk_iop_sap_out_rw_bus_lo_oe_default 0x00000000 +#define regk_iop_sap_out_rw_gen_gated_default 0x00000000 +#define regk_iop_sap_out_rw_gio_default 0x00000000 +#define regk_iop_sap_out_rw_gio_size 0x00000020 +#define regk_iop_sap_out_spu_gio6 0x00000002 +#define regk_iop_sap_out_spu_gio7 0x00000003 +#define regk_iop_sap_out_timer_grp0_tmr2 0x00000000 +#define regk_iop_sap_out_timer_grp0_tmr3 0x00000001 +#define regk_iop_sap_out_timer_grp1_tmr2 0x00000002 +#define regk_iop_sap_out_timer_grp1_tmr3 0x00000003 +#define regk_iop_sap_out_tmr200 0x00000001 +#define regk_iop_sap_out_yes 0x00000001 +#endif /* __iop_sap_out_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sw_cfg_defs_asm.h b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sw_cfg_defs_asm.h new file mode 100644 index 000000000000..3b3949b51a66 --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sw_cfg_defs_asm.h @@ -0,0 +1,739 @@ +#ifndef __iop_sw_cfg_defs_asm_h +#define __iop_sw_cfg_defs_asm_h + +/* + * This file is autogenerated from + * file: iop_sw_cfg.r + * + * by ../../../tools/rdesc/bin/rdes2c -asm -outfile iop_sw_cfg_defs_asm.h iop_sw_cfg.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_crc_par_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_crc_par_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_crc_par_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_crc_par_owner_offset 0 + +/* Register rw_dmc_in_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_dmc_in_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_dmc_in_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_dmc_in_owner_offset 4 + +/* Register rw_dmc_out_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_dmc_out_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_dmc_out_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_dmc_out_owner_offset 8 + +/* Register rw_fifo_in_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_fifo_in_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_fifo_in_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_fifo_in_owner_offset 12 + +/* Register rw_fifo_in_extra_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_fifo_in_extra_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_fifo_in_extra_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_fifo_in_extra_owner_offset 16 + +/* Register rw_fifo_out_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_fifo_out_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_fifo_out_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_fifo_out_owner_offset 20 + +/* Register rw_fifo_out_extra_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_fifo_out_extra_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_fifo_out_extra_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_fifo_out_extra_owner_offset 24 + +/* Register rw_sap_in_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_sap_in_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_sap_in_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_sap_in_owner_offset 28 + +/* Register rw_sap_out_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_sap_out_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_sap_out_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_sap_out_owner_offset 32 + +/* Register rw_scrc_in_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_scrc_in_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_scrc_in_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_scrc_in_owner_offset 36 + +/* Register rw_scrc_out_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_scrc_out_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_scrc_out_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_scrc_out_owner_offset 40 + +/* Register rw_spu_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_spu_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_spu_owner___cfg___width 1 +#define reg_iop_sw_cfg_rw_spu_owner___cfg___bit 0 +#define reg_iop_sw_cfg_rw_spu_owner_offset 44 + +/* Register rw_timer_grp0_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_timer_grp0_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_timer_grp0_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_timer_grp0_owner_offset 48 + +/* Register rw_timer_grp1_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_timer_grp1_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_timer_grp1_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_timer_grp1_owner_offset 52 + +/* Register rw_trigger_grp0_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_trigger_grp0_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_trigger_grp0_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_trigger_grp0_owner_offset 56 + +/* Register rw_trigger_grp1_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_trigger_grp1_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_trigger_grp1_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_trigger_grp1_owner_offset 60 + +/* Register rw_trigger_grp2_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_trigger_grp2_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_trigger_grp2_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_trigger_grp2_owner_offset 64 + +/* Register rw_trigger_grp3_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_trigger_grp3_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_trigger_grp3_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_trigger_grp3_owner_offset 68 + +/* Register rw_trigger_grp4_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_trigger_grp4_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_trigger_grp4_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_trigger_grp4_owner_offset 72 + +/* Register rw_trigger_grp5_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_trigger_grp5_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_trigger_grp5_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_trigger_grp5_owner_offset 76 + +/* Register rw_trigger_grp6_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_trigger_grp6_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_trigger_grp6_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_trigger_grp6_owner_offset 80 + +/* Register rw_trigger_grp7_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_trigger_grp7_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_trigger_grp7_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_trigger_grp7_owner_offset 84 + +/* Register rw_bus_mask, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_bus_mask___byte0___lsb 0 +#define reg_iop_sw_cfg_rw_bus_mask___byte0___width 8 +#define reg_iop_sw_cfg_rw_bus_mask___byte1___lsb 8 +#define reg_iop_sw_cfg_rw_bus_mask___byte1___width 8 +#define reg_iop_sw_cfg_rw_bus_mask___byte2___lsb 16 +#define reg_iop_sw_cfg_rw_bus_mask___byte2___width 8 +#define reg_iop_sw_cfg_rw_bus_mask___byte3___lsb 24 +#define reg_iop_sw_cfg_rw_bus_mask___byte3___width 8 +#define reg_iop_sw_cfg_rw_bus_mask_offset 88 + +/* Register rw_bus_oe_mask, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_bus_oe_mask___byte0___lsb 0 +#define reg_iop_sw_cfg_rw_bus_oe_mask___byte0___width 1 +#define reg_iop_sw_cfg_rw_bus_oe_mask___byte0___bit 0 +#define reg_iop_sw_cfg_rw_bus_oe_mask___byte1___lsb 1 +#define reg_iop_sw_cfg_rw_bus_oe_mask___byte1___width 1 +#define reg_iop_sw_cfg_rw_bus_oe_mask___byte1___bit 1 +#define reg_iop_sw_cfg_rw_bus_oe_mask___byte2___lsb 2 +#define reg_iop_sw_cfg_rw_bus_oe_mask___byte2___width 1 +#define reg_iop_sw_cfg_rw_bus_oe_mask___byte2___bit 2 +#define reg_iop_sw_cfg_rw_bus_oe_mask___byte3___lsb 3 +#define reg_iop_sw_cfg_rw_bus_oe_mask___byte3___width 1 +#define reg_iop_sw_cfg_rw_bus_oe_mask___byte3___bit 3 +#define reg_iop_sw_cfg_rw_bus_oe_mask_offset 92 + +/* Register rw_gio_mask, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_gio_mask___val___lsb 0 +#define reg_iop_sw_cfg_rw_gio_mask___val___width 32 +#define reg_iop_sw_cfg_rw_gio_mask_offset 96 + +/* Register rw_gio_oe_mask, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_gio_oe_mask___val___lsb 0 +#define reg_iop_sw_cfg_rw_gio_oe_mask___val___width 32 +#define reg_iop_sw_cfg_rw_gio_oe_mask_offset 100 + +/* Register rw_pinmapping, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_pinmapping___bus_byte0___lsb 0 +#define reg_iop_sw_cfg_rw_pinmapping___bus_byte0___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___bus_byte1___lsb 2 +#define reg_iop_sw_cfg_rw_pinmapping___bus_byte1___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___bus_byte2___lsb 4 +#define reg_iop_sw_cfg_rw_pinmapping___bus_byte2___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___bus_byte3___lsb 6 +#define reg_iop_sw_cfg_rw_pinmapping___bus_byte3___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___gio3_0___lsb 8 +#define reg_iop_sw_cfg_rw_pinmapping___gio3_0___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___gio7_4___lsb 10 +#define reg_iop_sw_cfg_rw_pinmapping___gio7_4___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___gio11_8___lsb 12 +#define reg_iop_sw_cfg_rw_pinmapping___gio11_8___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___gio15_12___lsb 14 +#define reg_iop_sw_cfg_rw_pinmapping___gio15_12___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___gio19_16___lsb 16 +#define reg_iop_sw_cfg_rw_pinmapping___gio19_16___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___gio23_20___lsb 18 +#define reg_iop_sw_cfg_rw_pinmapping___gio23_20___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___gio27_24___lsb 20 +#define reg_iop_sw_cfg_rw_pinmapping___gio27_24___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___gio31_28___lsb 22 +#define reg_iop_sw_cfg_rw_pinmapping___gio31_28___width 2 +#define reg_iop_sw_cfg_rw_pinmapping_offset 104 + +/* Register rw_bus_out_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_bus_out_cfg___bus_lo___lsb 0 +#define reg_iop_sw_cfg_rw_bus_out_cfg___bus_lo___width 2 +#define reg_iop_sw_cfg_rw_bus_out_cfg___bus_hi___lsb 2 +#define reg_iop_sw_cfg_rw_bus_out_cfg___bus_hi___width 2 +#define reg_iop_sw_cfg_rw_bus_out_cfg___bus_lo_oe___lsb 4 +#define reg_iop_sw_cfg_rw_bus_out_cfg___bus_lo_oe___width 2 +#define reg_iop_sw_cfg_rw_bus_out_cfg___bus_hi_oe___lsb 6 +#define reg_iop_sw_cfg_rw_bus_out_cfg___bus_hi_oe___width 2 +#define reg_iop_sw_cfg_rw_bus_out_cfg_offset 108 + +/* Register rw_gio_out_grp0_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio0___lsb 0 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio0___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio0_oe___lsb 3 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio0_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio0_oe___bit 3 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio1___lsb 4 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio1___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio1_oe___lsb 7 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio1_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio1_oe___bit 7 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio2___lsb 8 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio2___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio2_oe___lsb 11 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio2_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio2_oe___bit 11 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio3___lsb 12 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio3___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio3_oe___lsb 15 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio3_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio3_oe___bit 15 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg_offset 112 + +/* Register rw_gio_out_grp1_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio4___lsb 0 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio4___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio4_oe___lsb 3 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio4_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio4_oe___bit 3 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio5___lsb 4 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio5___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio5_oe___lsb 7 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio5_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio5_oe___bit 7 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio6___lsb 8 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio6___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio6_oe___lsb 11 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio6_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio6_oe___bit 11 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio7___lsb 12 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio7___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio7_oe___lsb 15 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio7_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio7_oe___bit 15 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg_offset 116 + +/* Register rw_gio_out_grp2_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio8___lsb 0 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio8___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio8_oe___lsb 3 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio8_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio8_oe___bit 3 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio9___lsb 4 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio9___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio9_oe___lsb 7 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio9_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio9_oe___bit 7 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio10___lsb 8 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio10___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio10_oe___lsb 11 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio10_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio10_oe___bit 11 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio11___lsb 12 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio11___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio11_oe___lsb 15 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio11_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio11_oe___bit 15 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg_offset 120 + +/* Register rw_gio_out_grp3_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio12___lsb 0 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio12___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio12_oe___lsb 3 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio12_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio12_oe___bit 3 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio13___lsb 4 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio13___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio13_oe___lsb 7 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio13_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio13_oe___bit 7 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio14___lsb 8 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio14___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio14_oe___lsb 11 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio14_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio14_oe___bit 11 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio15___lsb 12 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio15___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio15_oe___lsb 15 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio15_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio15_oe___bit 15 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg_offset 124 + +/* Register rw_gio_out_grp4_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio16___lsb 0 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio16___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio16_oe___lsb 3 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio16_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio16_oe___bit 3 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio17___lsb 4 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio17___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio17_oe___lsb 7 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio17_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio17_oe___bit 7 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio18___lsb 8 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio18___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio18_oe___lsb 11 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio18_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio18_oe___bit 11 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio19___lsb 12 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio19___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio19_oe___lsb 15 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio19_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio19_oe___bit 15 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg_offset 128 + +/* Register rw_gio_out_grp5_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio20___lsb 0 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio20___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio20_oe___lsb 3 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio20_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio20_oe___bit 3 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio21___lsb 4 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio21___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio21_oe___lsb 7 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio21_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio21_oe___bit 7 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio22___lsb 8 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio22___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio22_oe___lsb 11 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio22_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio22_oe___bit 11 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio23___lsb 12 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio23___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio23_oe___lsb 15 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio23_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio23_oe___bit 15 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg_offset 132 + +/* Register rw_gio_out_grp6_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio24___lsb 0 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio24___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio24_oe___lsb 3 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio24_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio24_oe___bit 3 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio25___lsb 4 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio25___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio25_oe___lsb 7 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio25_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio25_oe___bit 7 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio26___lsb 8 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio26___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio26_oe___lsb 11 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio26_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio26_oe___bit 11 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio27___lsb 12 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio27___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio27_oe___lsb 15 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio27_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio27_oe___bit 15 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg_offset 136 + +/* Register rw_gio_out_grp7_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio28___lsb 0 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio28___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio28_oe___lsb 3 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio28_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio28_oe___bit 3 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio29___lsb 4 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio29___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio29_oe___lsb 7 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio29_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio29_oe___bit 7 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio30___lsb 8 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio30___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio30_oe___lsb 11 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio30_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio30_oe___bit 11 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio31___lsb 12 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio31___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio31_oe___lsb 15 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio31_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio31_oe___bit 15 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg_offset 140 + +/* Register rw_spu_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_spu_cfg___bus0_in___lsb 0 +#define reg_iop_sw_cfg_rw_spu_cfg___bus0_in___width 1 +#define reg_iop_sw_cfg_rw_spu_cfg___bus0_in___bit 0 +#define reg_iop_sw_cfg_rw_spu_cfg___bus1_in___lsb 1 +#define reg_iop_sw_cfg_rw_spu_cfg___bus1_in___width 1 +#define reg_iop_sw_cfg_rw_spu_cfg___bus1_in___bit 1 +#define reg_iop_sw_cfg_rw_spu_cfg_offset 144 + +/* Register rw_timer_grp0_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___ext_clk___lsb 0 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___ext_clk___width 3 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr0_en___lsb 3 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr0_en___width 2 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr1_en___lsb 5 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr1_en___width 2 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr2_en___lsb 7 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr2_en___width 2 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr3_en___lsb 9 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr3_en___width 2 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr0_dis___lsb 11 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr0_dis___width 2 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr1_dis___lsb 13 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr1_dis___width 2 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr2_dis___lsb 15 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr2_dis___width 2 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr3_dis___lsb 17 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr3_dis___width 2 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg_offset 148 + +/* Register rw_timer_grp1_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___ext_clk___lsb 0 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___ext_clk___width 3 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr0_en___lsb 3 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr0_en___width 2 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr1_en___lsb 5 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr1_en___width 2 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr2_en___lsb 7 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr2_en___width 2 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr3_en___lsb 9 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr3_en___width 2 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr0_dis___lsb 11 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr0_dis___width 2 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr1_dis___lsb 13 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr1_dis___width 2 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr2_dis___lsb 15 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr2_dis___width 2 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr3_dis___lsb 17 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr3_dis___width 2 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg_offset 152 + +/* Register rw_trigger_grps_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp0_dis___lsb 0 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp0_dis___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp0_dis___bit 0 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp0_en___lsb 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp0_en___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp0_en___bit 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp1_dis___lsb 2 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp1_dis___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp1_dis___bit 2 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp1_en___lsb 3 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp1_en___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp1_en___bit 3 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp2_dis___lsb 4 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp2_dis___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp2_dis___bit 4 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp2_en___lsb 5 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp2_en___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp2_en___bit 5 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp3_dis___lsb 6 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp3_dis___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp3_dis___bit 6 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp3_en___lsb 7 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp3_en___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp3_en___bit 7 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp4_dis___lsb 8 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp4_dis___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp4_dis___bit 8 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp4_en___lsb 9 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp4_en___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp4_en___bit 9 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp5_dis___lsb 10 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp5_dis___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp5_dis___bit 10 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp5_en___lsb 11 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp5_en___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp5_en___bit 11 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp6_dis___lsb 12 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp6_dis___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp6_dis___bit 12 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp6_en___lsb 13 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp6_en___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp6_en___bit 13 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp7_dis___lsb 14 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp7_dis___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp7_dis___bit 14 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp7_en___lsb 15 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp7_en___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp7_en___bit 15 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg_offset 156 + +/* Register rw_pdp_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_pdp_cfg___out_strb___lsb 0 +#define reg_iop_sw_cfg_rw_pdp_cfg___out_strb___width 4 +#define reg_iop_sw_cfg_rw_pdp_cfg___in_src___lsb 4 +#define reg_iop_sw_cfg_rw_pdp_cfg___in_src___width 2 +#define reg_iop_sw_cfg_rw_pdp_cfg___in_size___lsb 6 +#define reg_iop_sw_cfg_rw_pdp_cfg___in_size___width 3 +#define reg_iop_sw_cfg_rw_pdp_cfg___in_last___lsb 9 +#define reg_iop_sw_cfg_rw_pdp_cfg___in_last___width 2 +#define reg_iop_sw_cfg_rw_pdp_cfg___in_strb___lsb 11 +#define reg_iop_sw_cfg_rw_pdp_cfg___in_strb___width 4 +#define reg_iop_sw_cfg_rw_pdp_cfg_offset 160 + +/* Register rw_sdp_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_out_strb___lsb 0 +#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_out_strb___width 3 +#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in_data___lsb 3 +#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in_data___width 3 +#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in_last___lsb 6 +#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in_last___width 2 +#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in_strb___lsb 8 +#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in_strb___width 3 +#define reg_iop_sw_cfg_rw_sdp_cfg_offset 164 + + +/* Constants */ +#define regk_iop_sw_cfg_a 0x00000001 +#define regk_iop_sw_cfg_b 0x00000002 +#define regk_iop_sw_cfg_bus 0x00000000 +#define regk_iop_sw_cfg_bus_rot16 0x00000002 +#define regk_iop_sw_cfg_bus_rot24 0x00000003 +#define regk_iop_sw_cfg_bus_rot8 0x00000001 +#define regk_iop_sw_cfg_clk12 0x00000000 +#define regk_iop_sw_cfg_cpu 0x00000000 +#define regk_iop_sw_cfg_gated_clk0 0x0000000e +#define regk_iop_sw_cfg_gated_clk1 0x0000000f +#define regk_iop_sw_cfg_gio0 0x00000004 +#define regk_iop_sw_cfg_gio1 0x00000001 +#define regk_iop_sw_cfg_gio2 0x00000005 +#define regk_iop_sw_cfg_gio3 0x00000002 +#define regk_iop_sw_cfg_gio4 0x00000006 +#define regk_iop_sw_cfg_gio5 0x00000003 +#define regk_iop_sw_cfg_gio6 0x00000007 +#define regk_iop_sw_cfg_gio7 0x00000004 +#define regk_iop_sw_cfg_gio_in18 0x00000002 +#define regk_iop_sw_cfg_gio_in19 0x00000003 +#define regk_iop_sw_cfg_gio_in20 0x00000004 +#define regk_iop_sw_cfg_gio_in21 0x00000005 +#define regk_iop_sw_cfg_gio_in26 0x00000006 +#define regk_iop_sw_cfg_gio_in27 0x00000007 +#define regk_iop_sw_cfg_gio_in4 0x00000000 +#define regk_iop_sw_cfg_gio_in5 0x00000001 +#define regk_iop_sw_cfg_last_timer_grp0_tmr2 0x00000001 +#define regk_iop_sw_cfg_last_timer_grp1_tmr2 0x00000002 +#define regk_iop_sw_cfg_last_timer_grp1_tmr3 0x00000003 +#define regk_iop_sw_cfg_mpu 0x00000001 +#define regk_iop_sw_cfg_none 0x00000000 +#define regk_iop_sw_cfg_pdp_out 0x00000001 +#define regk_iop_sw_cfg_pdp_out_hi 0x00000001 +#define regk_iop_sw_cfg_pdp_out_lo 0x00000000 +#define regk_iop_sw_cfg_rw_bus_mask_default 0x00000000 +#define regk_iop_sw_cfg_rw_bus_oe_mask_default 0x00000000 +#define regk_iop_sw_cfg_rw_bus_out_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_crc_par_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_dmc_in_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_dmc_out_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_fifo_in_extra_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_fifo_in_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_fifo_out_extra_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_fifo_out_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_gio_mask_default 0x00000000 +#define regk_iop_sw_cfg_rw_gio_oe_mask_default 0x00000000 +#define regk_iop_sw_cfg_rw_gio_out_grp0_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_gio_out_grp1_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_gio_out_grp2_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_gio_out_grp3_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_gio_out_grp4_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_gio_out_grp5_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_gio_out_grp6_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_gio_out_grp7_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_pdp_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_pinmapping_default 0x00555555 +#define regk_iop_sw_cfg_rw_sap_in_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_sap_out_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_scrc_in_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_scrc_out_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_sdp_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_spu_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_spu_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_timer_grp0_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_timer_grp0_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_timer_grp1_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_timer_grp1_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_trigger_grp0_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_trigger_grp1_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_trigger_grp2_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_trigger_grp3_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_trigger_grp4_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_trigger_grp5_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_trigger_grp6_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_trigger_grp7_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_trigger_grps_cfg_default 0x00000000 +#define regk_iop_sw_cfg_sdp_out 0x00000004 +#define regk_iop_sw_cfg_size16 0x00000002 +#define regk_iop_sw_cfg_size24 0x00000003 +#define regk_iop_sw_cfg_size32 0x00000004 +#define regk_iop_sw_cfg_size8 0x00000001 +#define regk_iop_sw_cfg_spu 0x00000002 +#define regk_iop_sw_cfg_spu_bus_out0_hi 0x00000002 +#define regk_iop_sw_cfg_spu_bus_out0_lo 0x00000002 +#define regk_iop_sw_cfg_spu_bus_out1_hi 0x00000003 +#define regk_iop_sw_cfg_spu_bus_out1_lo 0x00000003 +#define regk_iop_sw_cfg_spu_g0 0x00000007 +#define regk_iop_sw_cfg_spu_g1 0x00000007 +#define regk_iop_sw_cfg_spu_g2 0x00000007 +#define regk_iop_sw_cfg_spu_g3 0x00000007 +#define regk_iop_sw_cfg_spu_g4 0x00000007 +#define regk_iop_sw_cfg_spu_g5 0x00000007 +#define regk_iop_sw_cfg_spu_g6 0x00000007 +#define regk_iop_sw_cfg_spu_g7 0x00000007 +#define regk_iop_sw_cfg_spu_gio0 0x00000000 +#define regk_iop_sw_cfg_spu_gio1 0x00000001 +#define regk_iop_sw_cfg_spu_gio5 0x00000005 +#define regk_iop_sw_cfg_spu_gio6 0x00000006 +#define regk_iop_sw_cfg_spu_gio7 0x00000007 +#define regk_iop_sw_cfg_spu_gio_out0 0x00000008 +#define regk_iop_sw_cfg_spu_gio_out1 0x00000009 +#define regk_iop_sw_cfg_spu_gio_out2 0x0000000a +#define regk_iop_sw_cfg_spu_gio_out3 0x0000000b +#define regk_iop_sw_cfg_spu_gio_out4 0x0000000c +#define regk_iop_sw_cfg_spu_gio_out5 0x0000000d +#define regk_iop_sw_cfg_spu_gio_out6 0x0000000e +#define regk_iop_sw_cfg_spu_gio_out7 0x0000000f +#define regk_iop_sw_cfg_spu_gioout0 0x00000000 +#define regk_iop_sw_cfg_spu_gioout1 0x00000000 +#define regk_iop_sw_cfg_spu_gioout10 0x00000007 +#define regk_iop_sw_cfg_spu_gioout11 0x00000007 +#define regk_iop_sw_cfg_spu_gioout12 0x00000007 +#define regk_iop_sw_cfg_spu_gioout13 0x00000007 +#define regk_iop_sw_cfg_spu_gioout14 0x00000007 +#define regk_iop_sw_cfg_spu_gioout15 0x00000007 +#define regk_iop_sw_cfg_spu_gioout16 0x00000007 +#define regk_iop_sw_cfg_spu_gioout17 0x00000007 +#define regk_iop_sw_cfg_spu_gioout18 0x00000007 +#define regk_iop_sw_cfg_spu_gioout19 0x00000007 +#define regk_iop_sw_cfg_spu_gioout2 0x00000001 +#define regk_iop_sw_cfg_spu_gioout20 0x00000007 +#define regk_iop_sw_cfg_spu_gioout21 0x00000007 +#define regk_iop_sw_cfg_spu_gioout22 0x00000007 +#define regk_iop_sw_cfg_spu_gioout23 0x00000007 +#define regk_iop_sw_cfg_spu_gioout24 0x00000007 +#define regk_iop_sw_cfg_spu_gioout25 0x00000007 +#define regk_iop_sw_cfg_spu_gioout26 0x00000007 +#define regk_iop_sw_cfg_spu_gioout27 0x00000007 +#define regk_iop_sw_cfg_spu_gioout28 0x00000007 +#define regk_iop_sw_cfg_spu_gioout29 0x00000007 +#define regk_iop_sw_cfg_spu_gioout3 0x00000001 +#define regk_iop_sw_cfg_spu_gioout30 0x00000007 +#define regk_iop_sw_cfg_spu_gioout31 0x00000007 +#define regk_iop_sw_cfg_spu_gioout4 0x00000002 +#define regk_iop_sw_cfg_spu_gioout5 0x00000002 +#define regk_iop_sw_cfg_spu_gioout6 0x00000003 +#define regk_iop_sw_cfg_spu_gioout7 0x00000003 +#define regk_iop_sw_cfg_spu_gioout8 0x00000007 +#define regk_iop_sw_cfg_spu_gioout9 0x00000007 +#define regk_iop_sw_cfg_strb_timer_grp0_tmr0 0x00000001 +#define regk_iop_sw_cfg_strb_timer_grp0_tmr1 0x00000002 +#define regk_iop_sw_cfg_strb_timer_grp1_tmr0 0x00000003 +#define regk_iop_sw_cfg_strb_timer_grp1_tmr1 0x00000002 +#define regk_iop_sw_cfg_timer_grp0 0x00000000 +#define regk_iop_sw_cfg_timer_grp0_rot 0x00000001 +#define regk_iop_sw_cfg_timer_grp0_strb0 0x00000005 +#define regk_iop_sw_cfg_timer_grp0_strb1 0x00000005 +#define regk_iop_sw_cfg_timer_grp0_strb2 0x00000005 +#define regk_iop_sw_cfg_timer_grp0_strb3 0x00000005 +#define regk_iop_sw_cfg_timer_grp0_tmr0 0x00000002 +#define regk_iop_sw_cfg_timer_grp1 0x00000000 +#define regk_iop_sw_cfg_timer_grp1_rot 0x00000001 +#define regk_iop_sw_cfg_timer_grp1_strb0 0x00000006 +#define regk_iop_sw_cfg_timer_grp1_strb1 0x00000006 +#define regk_iop_sw_cfg_timer_grp1_strb2 0x00000006 +#define regk_iop_sw_cfg_timer_grp1_strb3 0x00000006 +#define regk_iop_sw_cfg_timer_grp1_tmr0 0x00000003 +#define regk_iop_sw_cfg_trig0_0 0x00000000 +#define regk_iop_sw_cfg_trig0_1 0x00000000 +#define regk_iop_sw_cfg_trig0_2 0x00000000 +#define regk_iop_sw_cfg_trig0_3 0x00000000 +#define regk_iop_sw_cfg_trig1_0 0x00000000 +#define regk_iop_sw_cfg_trig1_1 0x00000000 +#define regk_iop_sw_cfg_trig1_2 0x00000000 +#define regk_iop_sw_cfg_trig1_3 0x00000000 +#define regk_iop_sw_cfg_trig2_0 0x00000001 +#define regk_iop_sw_cfg_trig2_1 0x00000001 +#define regk_iop_sw_cfg_trig2_2 0x00000001 +#define regk_iop_sw_cfg_trig2_3 0x00000001 +#define regk_iop_sw_cfg_trig3_0 0x00000001 +#define regk_iop_sw_cfg_trig3_1 0x00000001 +#define regk_iop_sw_cfg_trig3_2 0x00000001 +#define regk_iop_sw_cfg_trig3_3 0x00000001 +#define regk_iop_sw_cfg_trig4_0 0x00000002 +#define regk_iop_sw_cfg_trig4_1 0x00000002 +#define regk_iop_sw_cfg_trig4_2 0x00000002 +#define regk_iop_sw_cfg_trig4_3 0x00000002 +#define regk_iop_sw_cfg_trig5_0 0x00000002 +#define regk_iop_sw_cfg_trig5_1 0x00000002 +#define regk_iop_sw_cfg_trig5_2 0x00000002 +#define regk_iop_sw_cfg_trig5_3 0x00000002 +#define regk_iop_sw_cfg_trig6_0 0x00000003 +#define regk_iop_sw_cfg_trig6_1 0x00000003 +#define regk_iop_sw_cfg_trig6_2 0x00000003 +#define regk_iop_sw_cfg_trig6_3 0x00000003 +#define regk_iop_sw_cfg_trig7_0 0x00000003 +#define regk_iop_sw_cfg_trig7_1 0x00000003 +#define regk_iop_sw_cfg_trig7_2 0x00000003 +#define regk_iop_sw_cfg_trig7_3 0x00000003 +#endif /* __iop_sw_cfg_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sw_cpu_defs_asm.h b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sw_cpu_defs_asm.h new file mode 100644 index 000000000000..3f4fe1b31815 --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sw_cpu_defs_asm.h @@ -0,0 +1,950 @@ +#ifndef __iop_sw_cpu_defs_asm_h +#define __iop_sw_cpu_defs_asm_h + +/* + * This file is autogenerated from + * file: iop_sw_cpu.r + * + * by ../../../tools/rdesc/bin/rdes2c -asm -outfile iop_sw_cpu_defs_asm.h iop_sw_cpu.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register r_mpu_trace, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_mpu_trace_offset 0 + +/* Register r_spu_trace, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_spu_trace_offset 4 + +/* Register r_spu_fsm_trace, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_spu_fsm_trace_offset 8 + +/* Register rw_mc_ctrl, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_mc_ctrl___keep_owner___lsb 0 +#define reg_iop_sw_cpu_rw_mc_ctrl___keep_owner___width 1 +#define reg_iop_sw_cpu_rw_mc_ctrl___keep_owner___bit 0 +#define reg_iop_sw_cpu_rw_mc_ctrl___cmd___lsb 1 +#define reg_iop_sw_cpu_rw_mc_ctrl___cmd___width 2 +#define reg_iop_sw_cpu_rw_mc_ctrl___size___lsb 3 +#define reg_iop_sw_cpu_rw_mc_ctrl___size___width 3 +#define reg_iop_sw_cpu_rw_mc_ctrl___wr_spu_mem___lsb 6 +#define reg_iop_sw_cpu_rw_mc_ctrl___wr_spu_mem___width 1 +#define reg_iop_sw_cpu_rw_mc_ctrl___wr_spu_mem___bit 6 +#define reg_iop_sw_cpu_rw_mc_ctrl_offset 12 + +/* Register rw_mc_data, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_mc_data___val___lsb 0 +#define reg_iop_sw_cpu_rw_mc_data___val___width 32 +#define reg_iop_sw_cpu_rw_mc_data_offset 16 + +/* Register rw_mc_addr, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_mc_addr_offset 20 + +/* Register rs_mc_data, scope iop_sw_cpu, type rs */ +#define reg_iop_sw_cpu_rs_mc_data_offset 24 + +/* Register r_mc_data, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_mc_data_offset 28 + +/* Register r_mc_stat, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_mc_stat___busy_cpu___lsb 0 +#define reg_iop_sw_cpu_r_mc_stat___busy_cpu___width 1 +#define reg_iop_sw_cpu_r_mc_stat___busy_cpu___bit 0 +#define reg_iop_sw_cpu_r_mc_stat___busy_mpu___lsb 1 +#define reg_iop_sw_cpu_r_mc_stat___busy_mpu___width 1 +#define reg_iop_sw_cpu_r_mc_stat___busy_mpu___bit 1 +#define reg_iop_sw_cpu_r_mc_stat___busy_spu___lsb 2 +#define reg_iop_sw_cpu_r_mc_stat___busy_spu___width 1 +#define reg_iop_sw_cpu_r_mc_stat___busy_spu___bit 2 +#define reg_iop_sw_cpu_r_mc_stat___owned_by_cpu___lsb 3 +#define reg_iop_sw_cpu_r_mc_stat___owned_by_cpu___width 1 +#define reg_iop_sw_cpu_r_mc_stat___owned_by_cpu___bit 3 +#define reg_iop_sw_cpu_r_mc_stat___owned_by_mpu___lsb 4 +#define reg_iop_sw_cpu_r_mc_stat___owned_by_mpu___width 1 +#define reg_iop_sw_cpu_r_mc_stat___owned_by_mpu___bit 4 +#define reg_iop_sw_cpu_r_mc_stat___owned_by_spu___lsb 5 +#define reg_iop_sw_cpu_r_mc_stat___owned_by_spu___width 1 +#define reg_iop_sw_cpu_r_mc_stat___owned_by_spu___bit 5 +#define reg_iop_sw_cpu_r_mc_stat_offset 32 + +/* Register rw_bus_clr_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_bus_clr_mask___byte0___lsb 0 +#define reg_iop_sw_cpu_rw_bus_clr_mask___byte0___width 8 +#define reg_iop_sw_cpu_rw_bus_clr_mask___byte1___lsb 8 +#define reg_iop_sw_cpu_rw_bus_clr_mask___byte1___width 8 +#define reg_iop_sw_cpu_rw_bus_clr_mask___byte2___lsb 16 +#define reg_iop_sw_cpu_rw_bus_clr_mask___byte2___width 8 +#define reg_iop_sw_cpu_rw_bus_clr_mask___byte3___lsb 24 +#define reg_iop_sw_cpu_rw_bus_clr_mask___byte3___width 8 +#define reg_iop_sw_cpu_rw_bus_clr_mask_offset 36 + +/* Register rw_bus_set_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_bus_set_mask___byte0___lsb 0 +#define reg_iop_sw_cpu_rw_bus_set_mask___byte0___width 8 +#define reg_iop_sw_cpu_rw_bus_set_mask___byte1___lsb 8 +#define reg_iop_sw_cpu_rw_bus_set_mask___byte1___width 8 +#define reg_iop_sw_cpu_rw_bus_set_mask___byte2___lsb 16 +#define reg_iop_sw_cpu_rw_bus_set_mask___byte2___width 8 +#define reg_iop_sw_cpu_rw_bus_set_mask___byte3___lsb 24 +#define reg_iop_sw_cpu_rw_bus_set_mask___byte3___width 8 +#define reg_iop_sw_cpu_rw_bus_set_mask_offset 40 + +/* Register rw_bus_oe_clr_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte0___lsb 0 +#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte0___width 1 +#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte0___bit 0 +#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte1___lsb 1 +#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte1___width 1 +#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte1___bit 1 +#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte2___lsb 2 +#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte2___width 1 +#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte2___bit 2 +#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte3___lsb 3 +#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte3___width 1 +#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte3___bit 3 +#define reg_iop_sw_cpu_rw_bus_oe_clr_mask_offset 44 + +/* Register rw_bus_oe_set_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte0___lsb 0 +#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte0___width 1 +#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte0___bit 0 +#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte1___lsb 1 +#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte1___width 1 +#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte1___bit 1 +#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte2___lsb 2 +#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte2___width 1 +#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte2___bit 2 +#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte3___lsb 3 +#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte3___width 1 +#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte3___bit 3 +#define reg_iop_sw_cpu_rw_bus_oe_set_mask_offset 48 + +/* Register r_bus_in, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_bus_in_offset 52 + +/* Register rw_gio_clr_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_gio_clr_mask___val___lsb 0 +#define reg_iop_sw_cpu_rw_gio_clr_mask___val___width 32 +#define reg_iop_sw_cpu_rw_gio_clr_mask_offset 56 + +/* Register rw_gio_set_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_gio_set_mask___val___lsb 0 +#define reg_iop_sw_cpu_rw_gio_set_mask___val___width 32 +#define reg_iop_sw_cpu_rw_gio_set_mask_offset 60 + +/* Register rw_gio_oe_clr_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_gio_oe_clr_mask___val___lsb 0 +#define reg_iop_sw_cpu_rw_gio_oe_clr_mask___val___width 32 +#define reg_iop_sw_cpu_rw_gio_oe_clr_mask_offset 64 + +/* Register rw_gio_oe_set_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_gio_oe_set_mask___val___lsb 0 +#define reg_iop_sw_cpu_rw_gio_oe_set_mask___val___width 32 +#define reg_iop_sw_cpu_rw_gio_oe_set_mask_offset 68 + +/* Register r_gio_in, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_gio_in_offset 72 + +/* Register rw_intr0_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_0___lsb 0 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_0___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_0___bit 0 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_1___lsb 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_1___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_1___bit 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_2___lsb 2 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_2___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_2___bit 2 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_3___lsb 3 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_3___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_3___bit 3 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_4___lsb 4 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_4___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_4___bit 4 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_5___lsb 5 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_5___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_5___bit 5 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_6___lsb 6 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_6___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_6___bit 6 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_7___lsb 7 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_7___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_7___bit 7 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_8___lsb 8 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_8___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_8___bit 8 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_9___lsb 9 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_9___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_9___bit 9 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_10___lsb 10 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_10___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_10___bit 10 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_11___lsb 11 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_11___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_11___bit 11 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_12___lsb 12 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_12___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_12___bit 12 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_13___lsb 13 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_13___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_13___bit 13 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_14___lsb 14 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_14___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_14___bit 14 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_15___lsb 15 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_15___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_15___bit 15 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_0___lsb 16 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_0___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_0___bit 16 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_1___lsb 17 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_1___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_1___bit 17 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_2___lsb 18 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_2___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_2___bit 18 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_3___lsb 19 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_3___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_3___bit 19 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_4___lsb 20 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_4___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_4___bit 20 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_5___lsb 21 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_5___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_5___bit 21 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_6___lsb 22 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_6___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_6___bit 22 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_7___lsb 23 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_7___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_7___bit 23 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_8___lsb 24 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_8___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_8___bit 24 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_9___lsb 25 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_9___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_9___bit 25 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_10___lsb 26 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_10___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_10___bit 26 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_11___lsb 27 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_11___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_11___bit 27 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_12___lsb 28 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_12___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_12___bit 28 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_13___lsb 29 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_13___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_13___bit 29 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_14___lsb 30 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_14___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_14___bit 30 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_15___lsb 31 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_15___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_15___bit 31 +#define reg_iop_sw_cpu_rw_intr0_mask_offset 76 + +/* Register rw_ack_intr0, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_0___lsb 0 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_0___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_0___bit 0 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_1___lsb 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_1___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_1___bit 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_2___lsb 2 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_2___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_2___bit 2 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_3___lsb 3 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_3___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_3___bit 3 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_4___lsb 4 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_4___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_4___bit 4 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_5___lsb 5 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_5___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_5___bit 5 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_6___lsb 6 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_6___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_6___bit 6 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_7___lsb 7 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_7___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_7___bit 7 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_8___lsb 8 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_8___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_8___bit 8 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_9___lsb 9 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_9___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_9___bit 9 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_10___lsb 10 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_10___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_10___bit 10 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_11___lsb 11 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_11___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_11___bit 11 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_12___lsb 12 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_12___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_12___bit 12 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_13___lsb 13 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_13___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_13___bit 13 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_14___lsb 14 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_14___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_14___bit 14 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_15___lsb 15 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_15___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_15___bit 15 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_0___lsb 16 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_0___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_0___bit 16 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_1___lsb 17 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_1___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_1___bit 17 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_2___lsb 18 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_2___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_2___bit 18 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_3___lsb 19 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_3___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_3___bit 19 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_4___lsb 20 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_4___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_4___bit 20 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_5___lsb 21 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_5___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_5___bit 21 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_6___lsb 22 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_6___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_6___bit 22 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_7___lsb 23 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_7___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_7___bit 23 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_8___lsb 24 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_8___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_8___bit 24 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_9___lsb 25 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_9___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_9___bit 25 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_10___lsb 26 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_10___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_10___bit 26 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_11___lsb 27 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_11___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_11___bit 27 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_12___lsb 28 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_12___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_12___bit 28 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_13___lsb 29 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_13___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_13___bit 29 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_14___lsb 30 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_14___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_14___bit 30 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_15___lsb 31 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_15___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_15___bit 31 +#define reg_iop_sw_cpu_rw_ack_intr0_offset 80 + +/* Register r_intr0, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_intr0___mpu_0___lsb 0 +#define reg_iop_sw_cpu_r_intr0___mpu_0___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_0___bit 0 +#define reg_iop_sw_cpu_r_intr0___mpu_1___lsb 1 +#define reg_iop_sw_cpu_r_intr0___mpu_1___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_1___bit 1 +#define reg_iop_sw_cpu_r_intr0___mpu_2___lsb 2 +#define reg_iop_sw_cpu_r_intr0___mpu_2___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_2___bit 2 +#define reg_iop_sw_cpu_r_intr0___mpu_3___lsb 3 +#define reg_iop_sw_cpu_r_intr0___mpu_3___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_3___bit 3 +#define reg_iop_sw_cpu_r_intr0___mpu_4___lsb 4 +#define reg_iop_sw_cpu_r_intr0___mpu_4___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_4___bit 4 +#define reg_iop_sw_cpu_r_intr0___mpu_5___lsb 5 +#define reg_iop_sw_cpu_r_intr0___mpu_5___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_5___bit 5 +#define reg_iop_sw_cpu_r_intr0___mpu_6___lsb 6 +#define reg_iop_sw_cpu_r_intr0___mpu_6___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_6___bit 6 +#define reg_iop_sw_cpu_r_intr0___mpu_7___lsb 7 +#define reg_iop_sw_cpu_r_intr0___mpu_7___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_7___bit 7 +#define reg_iop_sw_cpu_r_intr0___mpu_8___lsb 8 +#define reg_iop_sw_cpu_r_intr0___mpu_8___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_8___bit 8 +#define reg_iop_sw_cpu_r_intr0___mpu_9___lsb 9 +#define reg_iop_sw_cpu_r_intr0___mpu_9___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_9___bit 9 +#define reg_iop_sw_cpu_r_intr0___mpu_10___lsb 10 +#define reg_iop_sw_cpu_r_intr0___mpu_10___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_10___bit 10 +#define reg_iop_sw_cpu_r_intr0___mpu_11___lsb 11 +#define reg_iop_sw_cpu_r_intr0___mpu_11___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_11___bit 11 +#define reg_iop_sw_cpu_r_intr0___mpu_12___lsb 12 +#define reg_iop_sw_cpu_r_intr0___mpu_12___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_12___bit 12 +#define reg_iop_sw_cpu_r_intr0___mpu_13___lsb 13 +#define reg_iop_sw_cpu_r_intr0___mpu_13___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_13___bit 13 +#define reg_iop_sw_cpu_r_intr0___mpu_14___lsb 14 +#define reg_iop_sw_cpu_r_intr0___mpu_14___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_14___bit 14 +#define reg_iop_sw_cpu_r_intr0___mpu_15___lsb 15 +#define reg_iop_sw_cpu_r_intr0___mpu_15___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_15___bit 15 +#define reg_iop_sw_cpu_r_intr0___spu_0___lsb 16 +#define reg_iop_sw_cpu_r_intr0___spu_0___width 1 +#define reg_iop_sw_cpu_r_intr0___spu_0___bit 16 +#define reg_iop_sw_cpu_r_intr0___spu_1___lsb 17 +#define reg_iop_sw_cpu_r_intr0___spu_1___width 1 +#define reg_iop_sw_cpu_r_intr0___spu_1___bit 17 +#define reg_iop_sw_cpu_r_intr0___spu_2___lsb 18 +#define reg_iop_sw_cpu_r_intr0___spu_2___width 1 +#define reg_iop_sw_cpu_r_intr0___spu_2___bit 18 +#define reg_iop_sw_cpu_r_intr0___spu_3___lsb 19 +#define reg_iop_sw_cpu_r_intr0___spu_3___width 1 +#define reg_iop_sw_cpu_r_intr0___spu_3___bit 19 +#define reg_iop_sw_cpu_r_intr0___spu_4___lsb 20 +#define reg_iop_sw_cpu_r_intr0___spu_4___width 1 +#define reg_iop_sw_cpu_r_intr0___spu_4___bit 20 +#define reg_iop_sw_cpu_r_intr0___spu_5___lsb 21 +#define reg_iop_sw_cpu_r_intr0___spu_5___width 1 +#define reg_iop_sw_cpu_r_intr0___spu_5___bit 21 +#define reg_iop_sw_cpu_r_intr0___spu_6___lsb 22 +#define reg_iop_sw_cpu_r_intr0___spu_6___width 1 +#define reg_iop_sw_cpu_r_intr0___spu_6___bit 22 +#define reg_iop_sw_cpu_r_intr0___spu_7___lsb 23 +#define reg_iop_sw_cpu_r_intr0___spu_7___width 1 +#define reg_iop_sw_cpu_r_intr0___spu_7___bit 23 +#define reg_iop_sw_cpu_r_intr0___spu_8___lsb 24 +#define reg_iop_sw_cpu_r_intr0___spu_8___width 1 +#define reg_iop_sw_cpu_r_intr0___spu_8___bit 24 +#define reg_iop_sw_cpu_r_intr0___spu_9___lsb 25 +#define reg_iop_sw_cpu_r_intr0___spu_9___width 1 +#define reg_iop_sw_cpu_r_intr0___spu_9___bit 25 +#define reg_iop_sw_cpu_r_intr0___spu_10___lsb 26 +#define reg_iop_sw_cpu_r_intr0___spu_10___width 1 +#define reg_iop_sw_cpu_r_intr0___spu_10___bit 26 +#define reg_iop_sw_cpu_r_intr0___spu_11___lsb 27 +#define reg_iop_sw_cpu_r_intr0___spu_11___width 1 +#define reg_iop_sw_cpu_r_intr0___spu_11___bit 27 +#define reg_iop_sw_cpu_r_intr0___spu_12___lsb 28 +#define reg_iop_sw_cpu_r_intr0___spu_12___width 1 +#define reg_iop_sw_cpu_r_intr0___spu_12___bit 28 +#define reg_iop_sw_cpu_r_intr0___spu_13___lsb 29 +#define reg_iop_sw_cpu_r_intr0___spu_13___width 1 +#define reg_iop_sw_cpu_r_intr0___spu_13___bit 29 +#define reg_iop_sw_cpu_r_intr0___spu_14___lsb 30 +#define reg_iop_sw_cpu_r_intr0___spu_14___width 1 +#define reg_iop_sw_cpu_r_intr0___spu_14___bit 30 +#define reg_iop_sw_cpu_r_intr0___spu_15___lsb 31 +#define reg_iop_sw_cpu_r_intr0___spu_15___width 1 +#define reg_iop_sw_cpu_r_intr0___spu_15___bit 31 +#define reg_iop_sw_cpu_r_intr0_offset 84 + +/* Register r_masked_intr0, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_masked_intr0___mpu_0___lsb 0 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_0___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_0___bit 0 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_1___lsb 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_1___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_1___bit 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_2___lsb 2 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_2___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_2___bit 2 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_3___lsb 3 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_3___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_3___bit 3 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_4___lsb 4 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_4___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_4___bit 4 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_5___lsb 5 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_5___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_5___bit 5 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_6___lsb 6 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_6___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_6___bit 6 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_7___lsb 7 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_7___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_7___bit 7 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_8___lsb 8 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_8___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_8___bit 8 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_9___lsb 9 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_9___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_9___bit 9 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_10___lsb 10 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_10___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_10___bit 10 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_11___lsb 11 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_11___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_11___bit 11 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_12___lsb 12 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_12___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_12___bit 12 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_13___lsb 13 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_13___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_13___bit 13 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_14___lsb 14 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_14___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_14___bit 14 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_15___lsb 15 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_15___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_15___bit 15 +#define reg_iop_sw_cpu_r_masked_intr0___spu_0___lsb 16 +#define reg_iop_sw_cpu_r_masked_intr0___spu_0___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu_0___bit 16 +#define reg_iop_sw_cpu_r_masked_intr0___spu_1___lsb 17 +#define reg_iop_sw_cpu_r_masked_intr0___spu_1___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu_1___bit 17 +#define reg_iop_sw_cpu_r_masked_intr0___spu_2___lsb 18 +#define reg_iop_sw_cpu_r_masked_intr0___spu_2___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu_2___bit 18 +#define reg_iop_sw_cpu_r_masked_intr0___spu_3___lsb 19 +#define reg_iop_sw_cpu_r_masked_intr0___spu_3___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu_3___bit 19 +#define reg_iop_sw_cpu_r_masked_intr0___spu_4___lsb 20 +#define reg_iop_sw_cpu_r_masked_intr0___spu_4___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu_4___bit 20 +#define reg_iop_sw_cpu_r_masked_intr0___spu_5___lsb 21 +#define reg_iop_sw_cpu_r_masked_intr0___spu_5___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu_5___bit 21 +#define reg_iop_sw_cpu_r_masked_intr0___spu_6___lsb 22 +#define reg_iop_sw_cpu_r_masked_intr0___spu_6___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu_6___bit 22 +#define reg_iop_sw_cpu_r_masked_intr0___spu_7___lsb 23 +#define reg_iop_sw_cpu_r_masked_intr0___spu_7___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu_7___bit 23 +#define reg_iop_sw_cpu_r_masked_intr0___spu_8___lsb 24 +#define reg_iop_sw_cpu_r_masked_intr0___spu_8___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu_8___bit 24 +#define reg_iop_sw_cpu_r_masked_intr0___spu_9___lsb 25 +#define reg_iop_sw_cpu_r_masked_intr0___spu_9___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu_9___bit 25 +#define reg_iop_sw_cpu_r_masked_intr0___spu_10___lsb 26 +#define reg_iop_sw_cpu_r_masked_intr0___spu_10___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu_10___bit 26 +#define reg_iop_sw_cpu_r_masked_intr0___spu_11___lsb 27 +#define reg_iop_sw_cpu_r_masked_intr0___spu_11___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu_11___bit 27 +#define reg_iop_sw_cpu_r_masked_intr0___spu_12___lsb 28 +#define reg_iop_sw_cpu_r_masked_intr0___spu_12___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu_12___bit 28 +#define reg_iop_sw_cpu_r_masked_intr0___spu_13___lsb 29 +#define reg_iop_sw_cpu_r_masked_intr0___spu_13___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu_13___bit 29 +#define reg_iop_sw_cpu_r_masked_intr0___spu_14___lsb 30 +#define reg_iop_sw_cpu_r_masked_intr0___spu_14___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu_14___bit 30 +#define reg_iop_sw_cpu_r_masked_intr0___spu_15___lsb 31 +#define reg_iop_sw_cpu_r_masked_intr0___spu_15___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu_15___bit 31 +#define reg_iop_sw_cpu_r_masked_intr0_offset 88 + +/* Register rw_intr1_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_16___lsb 0 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_16___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_16___bit 0 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_17___lsb 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_17___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_17___bit 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_18___lsb 2 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_18___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_18___bit 2 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_19___lsb 3 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_19___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_19___bit 3 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_20___lsb 4 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_20___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_20___bit 4 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_21___lsb 5 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_21___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_21___bit 5 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_22___lsb 6 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_22___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_22___bit 6 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_23___lsb 7 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_23___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_23___bit 7 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_24___lsb 8 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_24___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_24___bit 8 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_25___lsb 9 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_25___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_25___bit 9 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_26___lsb 10 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_26___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_26___bit 10 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_27___lsb 11 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_27___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_27___bit 11 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_28___lsb 12 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_28___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_28___bit 12 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_29___lsb 13 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_29___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_29___bit 13 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_30___lsb 14 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_30___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_30___bit 14 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_31___lsb 15 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_31___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_31___bit 15 +#define reg_iop_sw_cpu_rw_intr1_mask___dmc_in___lsb 16 +#define reg_iop_sw_cpu_rw_intr1_mask___dmc_in___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___dmc_in___bit 16 +#define reg_iop_sw_cpu_rw_intr1_mask___dmc_out___lsb 17 +#define reg_iop_sw_cpu_rw_intr1_mask___dmc_out___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___dmc_out___bit 17 +#define reg_iop_sw_cpu_rw_intr1_mask___fifo_in___lsb 18 +#define reg_iop_sw_cpu_rw_intr1_mask___fifo_in___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___fifo_in___bit 18 +#define reg_iop_sw_cpu_rw_intr1_mask___fifo_out___lsb 19 +#define reg_iop_sw_cpu_rw_intr1_mask___fifo_out___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___fifo_out___bit 19 +#define reg_iop_sw_cpu_rw_intr1_mask___fifo_in_extra___lsb 20 +#define reg_iop_sw_cpu_rw_intr1_mask___fifo_in_extra___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___fifo_in_extra___bit 20 +#define reg_iop_sw_cpu_rw_intr1_mask___fifo_out_extra___lsb 21 +#define reg_iop_sw_cpu_rw_intr1_mask___fifo_out_extra___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___fifo_out_extra___bit 21 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp0___lsb 22 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp0___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp0___bit 22 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp1___lsb 23 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp1___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp1___bit 23 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp2___lsb 24 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp2___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp2___bit 24 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp3___lsb 25 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp3___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp3___bit 25 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp4___lsb 26 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp4___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp4___bit 26 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp5___lsb 27 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp5___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp5___bit 27 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp6___lsb 28 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp6___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp6___bit 28 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp7___lsb 29 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp7___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp7___bit 29 +#define reg_iop_sw_cpu_rw_intr1_mask___timer_grp0___lsb 30 +#define reg_iop_sw_cpu_rw_intr1_mask___timer_grp0___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___timer_grp0___bit 30 +#define reg_iop_sw_cpu_rw_intr1_mask___timer_grp1___lsb 31 +#define reg_iop_sw_cpu_rw_intr1_mask___timer_grp1___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___timer_grp1___bit 31 +#define reg_iop_sw_cpu_rw_intr1_mask_offset 92 + +/* Register rw_ack_intr1, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_16___lsb 0 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_16___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_16___bit 0 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_17___lsb 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_17___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_17___bit 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_18___lsb 2 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_18___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_18___bit 2 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_19___lsb 3 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_19___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_19___bit 3 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_20___lsb 4 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_20___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_20___bit 4 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_21___lsb 5 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_21___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_21___bit 5 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_22___lsb 6 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_22___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_22___bit 6 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_23___lsb 7 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_23___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_23___bit 7 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_24___lsb 8 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_24___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_24___bit 8 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_25___lsb 9 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_25___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_25___bit 9 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_26___lsb 10 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_26___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_26___bit 10 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_27___lsb 11 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_27___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_27___bit 11 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_28___lsb 12 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_28___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_28___bit 12 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_29___lsb 13 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_29___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_29___bit 13 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_30___lsb 14 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_30___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_30___bit 14 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_31___lsb 15 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_31___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_31___bit 15 +#define reg_iop_sw_cpu_rw_ack_intr1_offset 96 + +/* Register r_intr1, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_intr1___mpu_16___lsb 0 +#define reg_iop_sw_cpu_r_intr1___mpu_16___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_16___bit 0 +#define reg_iop_sw_cpu_r_intr1___mpu_17___lsb 1 +#define reg_iop_sw_cpu_r_intr1___mpu_17___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_17___bit 1 +#define reg_iop_sw_cpu_r_intr1___mpu_18___lsb 2 +#define reg_iop_sw_cpu_r_intr1___mpu_18___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_18___bit 2 +#define reg_iop_sw_cpu_r_intr1___mpu_19___lsb 3 +#define reg_iop_sw_cpu_r_intr1___mpu_19___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_19___bit 3 +#define reg_iop_sw_cpu_r_intr1___mpu_20___lsb 4 +#define reg_iop_sw_cpu_r_intr1___mpu_20___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_20___bit 4 +#define reg_iop_sw_cpu_r_intr1___mpu_21___lsb 5 +#define reg_iop_sw_cpu_r_intr1___mpu_21___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_21___bit 5 +#define reg_iop_sw_cpu_r_intr1___mpu_22___lsb 6 +#define reg_iop_sw_cpu_r_intr1___mpu_22___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_22___bit 6 +#define reg_iop_sw_cpu_r_intr1___mpu_23___lsb 7 +#define reg_iop_sw_cpu_r_intr1___mpu_23___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_23___bit 7 +#define reg_iop_sw_cpu_r_intr1___mpu_24___lsb 8 +#define reg_iop_sw_cpu_r_intr1___mpu_24___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_24___bit 8 +#define reg_iop_sw_cpu_r_intr1___mpu_25___lsb 9 +#define reg_iop_sw_cpu_r_intr1___mpu_25___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_25___bit 9 +#define reg_iop_sw_cpu_r_intr1___mpu_26___lsb 10 +#define reg_iop_sw_cpu_r_intr1___mpu_26___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_26___bit 10 +#define reg_iop_sw_cpu_r_intr1___mpu_27___lsb 11 +#define reg_iop_sw_cpu_r_intr1___mpu_27___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_27___bit 11 +#define reg_iop_sw_cpu_r_intr1___mpu_28___lsb 12 +#define reg_iop_sw_cpu_r_intr1___mpu_28___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_28___bit 12 +#define reg_iop_sw_cpu_r_intr1___mpu_29___lsb 13 +#define reg_iop_sw_cpu_r_intr1___mpu_29___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_29___bit 13 +#define reg_iop_sw_cpu_r_intr1___mpu_30___lsb 14 +#define reg_iop_sw_cpu_r_intr1___mpu_30___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_30___bit 14 +#define reg_iop_sw_cpu_r_intr1___mpu_31___lsb 15 +#define reg_iop_sw_cpu_r_intr1___mpu_31___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_31___bit 15 +#define reg_iop_sw_cpu_r_intr1___dmc_in___lsb 16 +#define reg_iop_sw_cpu_r_intr1___dmc_in___width 1 +#define reg_iop_sw_cpu_r_intr1___dmc_in___bit 16 +#define reg_iop_sw_cpu_r_intr1___dmc_out___lsb 17 +#define reg_iop_sw_cpu_r_intr1___dmc_out___width 1 +#define reg_iop_sw_cpu_r_intr1___dmc_out___bit 17 +#define reg_iop_sw_cpu_r_intr1___fifo_in___lsb 18 +#define reg_iop_sw_cpu_r_intr1___fifo_in___width 1 +#define reg_iop_sw_cpu_r_intr1___fifo_in___bit 18 +#define reg_iop_sw_cpu_r_intr1___fifo_out___lsb 19 +#define reg_iop_sw_cpu_r_intr1___fifo_out___width 1 +#define reg_iop_sw_cpu_r_intr1___fifo_out___bit 19 +#define reg_iop_sw_cpu_r_intr1___fifo_in_extra___lsb 20 +#define reg_iop_sw_cpu_r_intr1___fifo_in_extra___width 1 +#define reg_iop_sw_cpu_r_intr1___fifo_in_extra___bit 20 +#define reg_iop_sw_cpu_r_intr1___fifo_out_extra___lsb 21 +#define reg_iop_sw_cpu_r_intr1___fifo_out_extra___width 1 +#define reg_iop_sw_cpu_r_intr1___fifo_out_extra___bit 21 +#define reg_iop_sw_cpu_r_intr1___trigger_grp0___lsb 22 +#define reg_iop_sw_cpu_r_intr1___trigger_grp0___width 1 +#define reg_iop_sw_cpu_r_intr1___trigger_grp0___bit 22 +#define reg_iop_sw_cpu_r_intr1___trigger_grp1___lsb 23 +#define reg_iop_sw_cpu_r_intr1___trigger_grp1___width 1 +#define reg_iop_sw_cpu_r_intr1___trigger_grp1___bit 23 +#define reg_iop_sw_cpu_r_intr1___trigger_grp2___lsb 24 +#define reg_iop_sw_cpu_r_intr1___trigger_grp2___width 1 +#define reg_iop_sw_cpu_r_intr1___trigger_grp2___bit 24 +#define reg_iop_sw_cpu_r_intr1___trigger_grp3___lsb 25 +#define reg_iop_sw_cpu_r_intr1___trigger_grp3___width 1 +#define reg_iop_sw_cpu_r_intr1___trigger_grp3___bit 25 +#define reg_iop_sw_cpu_r_intr1___trigger_grp4___lsb 26 +#define reg_iop_sw_cpu_r_intr1___trigger_grp4___width 1 +#define reg_iop_sw_cpu_r_intr1___trigger_grp4___bit 26 +#define reg_iop_sw_cpu_r_intr1___trigger_grp5___lsb 27 +#define reg_iop_sw_cpu_r_intr1___trigger_grp5___width 1 +#define reg_iop_sw_cpu_r_intr1___trigger_grp5___bit 27 +#define reg_iop_sw_cpu_r_intr1___trigger_grp6___lsb 28 +#define reg_iop_sw_cpu_r_intr1___trigger_grp6___width 1 +#define reg_iop_sw_cpu_r_intr1___trigger_grp6___bit 28 +#define reg_iop_sw_cpu_r_intr1___trigger_grp7___lsb 29 +#define reg_iop_sw_cpu_r_intr1___trigger_grp7___width 1 +#define reg_iop_sw_cpu_r_intr1___trigger_grp7___bit 29 +#define reg_iop_sw_cpu_r_intr1___timer_grp0___lsb 30 +#define reg_iop_sw_cpu_r_intr1___timer_grp0___width 1 +#define reg_iop_sw_cpu_r_intr1___timer_grp0___bit 30 +#define reg_iop_sw_cpu_r_intr1___timer_grp1___lsb 31 +#define reg_iop_sw_cpu_r_intr1___timer_grp1___width 1 +#define reg_iop_sw_cpu_r_intr1___timer_grp1___bit 31 +#define reg_iop_sw_cpu_r_intr1_offset 100 + +/* Register r_masked_intr1, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_masked_intr1___mpu_16___lsb 0 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_16___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_16___bit 0 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_17___lsb 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_17___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_17___bit 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_18___lsb 2 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_18___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_18___bit 2 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_19___lsb 3 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_19___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_19___bit 3 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_20___lsb 4 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_20___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_20___bit 4 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_21___lsb 5 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_21___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_21___bit 5 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_22___lsb 6 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_22___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_22___bit 6 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_23___lsb 7 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_23___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_23___bit 7 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_24___lsb 8 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_24___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_24___bit 8 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_25___lsb 9 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_25___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_25___bit 9 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_26___lsb 10 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_26___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_26___bit 10 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_27___lsb 11 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_27___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_27___bit 11 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_28___lsb 12 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_28___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_28___bit 12 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_29___lsb 13 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_29___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_29___bit 13 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_30___lsb 14 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_30___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_30___bit 14 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_31___lsb 15 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_31___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_31___bit 15 +#define reg_iop_sw_cpu_r_masked_intr1___dmc_in___lsb 16 +#define reg_iop_sw_cpu_r_masked_intr1___dmc_in___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___dmc_in___bit 16 +#define reg_iop_sw_cpu_r_masked_intr1___dmc_out___lsb 17 +#define reg_iop_sw_cpu_r_masked_intr1___dmc_out___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___dmc_out___bit 17 +#define reg_iop_sw_cpu_r_masked_intr1___fifo_in___lsb 18 +#define reg_iop_sw_cpu_r_masked_intr1___fifo_in___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___fifo_in___bit 18 +#define reg_iop_sw_cpu_r_masked_intr1___fifo_out___lsb 19 +#define reg_iop_sw_cpu_r_masked_intr1___fifo_out___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___fifo_out___bit 19 +#define reg_iop_sw_cpu_r_masked_intr1___fifo_in_extra___lsb 20 +#define reg_iop_sw_cpu_r_masked_intr1___fifo_in_extra___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___fifo_in_extra___bit 20 +#define reg_iop_sw_cpu_r_masked_intr1___fifo_out_extra___lsb 21 +#define reg_iop_sw_cpu_r_masked_intr1___fifo_out_extra___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___fifo_out_extra___bit 21 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp0___lsb 22 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp0___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp0___bit 22 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp1___lsb 23 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp1___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp1___bit 23 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp2___lsb 24 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp2___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp2___bit 24 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp3___lsb 25 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp3___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp3___bit 25 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp4___lsb 26 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp4___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp4___bit 26 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp5___lsb 27 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp5___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp5___bit 27 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp6___lsb 28 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp6___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp6___bit 28 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp7___lsb 29 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp7___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp7___bit 29 +#define reg_iop_sw_cpu_r_masked_intr1___timer_grp0___lsb 30 +#define reg_iop_sw_cpu_r_masked_intr1___timer_grp0___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___timer_grp0___bit 30 +#define reg_iop_sw_cpu_r_masked_intr1___timer_grp1___lsb 31 +#define reg_iop_sw_cpu_r_masked_intr1___timer_grp1___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___timer_grp1___bit 31 +#define reg_iop_sw_cpu_r_masked_intr1_offset 104 + + +/* Constants */ +#define regk_iop_sw_cpu_copy 0x00000000 +#define regk_iop_sw_cpu_no 0x00000000 +#define regk_iop_sw_cpu_rd 0x00000002 +#define regk_iop_sw_cpu_reg_copy 0x00000001 +#define regk_iop_sw_cpu_rw_bus_clr_mask_default 0x00000000 +#define regk_iop_sw_cpu_rw_bus_oe_clr_mask_default 0x00000000 +#define regk_iop_sw_cpu_rw_bus_oe_set_mask_default 0x00000000 +#define regk_iop_sw_cpu_rw_bus_set_mask_default 0x00000000 +#define regk_iop_sw_cpu_rw_gio_clr_mask_default 0x00000000 +#define regk_iop_sw_cpu_rw_gio_oe_clr_mask_default 0x00000000 +#define regk_iop_sw_cpu_rw_gio_oe_set_mask_default 0x00000000 +#define regk_iop_sw_cpu_rw_gio_set_mask_default 0x00000000 +#define regk_iop_sw_cpu_rw_intr0_mask_default 0x00000000 +#define regk_iop_sw_cpu_rw_intr1_mask_default 0x00000000 +#define regk_iop_sw_cpu_wr 0x00000003 +#define regk_iop_sw_cpu_yes 0x00000001 +#endif /* __iop_sw_cpu_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sw_mpu_defs_asm.h b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sw_mpu_defs_asm.h new file mode 100644 index 000000000000..ffcc83b22d21 --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sw_mpu_defs_asm.h @@ -0,0 +1,1086 @@ +#ifndef __iop_sw_mpu_defs_asm_h +#define __iop_sw_mpu_defs_asm_h + +/* + * This file is autogenerated from + * file: iop_sw_mpu.r + * + * by ../../../tools/rdesc/bin/rdes2c -asm -outfile iop_sw_mpu_defs_asm.h iop_sw_mpu.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_sw_cfg_owner, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_sw_cfg_owner___cfg___lsb 0 +#define reg_iop_sw_mpu_rw_sw_cfg_owner___cfg___width 2 +#define reg_iop_sw_mpu_rw_sw_cfg_owner_offset 0 + +/* Register r_spu_trace, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_spu_trace_offset 4 + +/* Register r_spu_fsm_trace, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_spu_fsm_trace_offset 8 + +/* Register rw_mc_ctrl, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_mc_ctrl___keep_owner___lsb 0 +#define reg_iop_sw_mpu_rw_mc_ctrl___keep_owner___width 1 +#define reg_iop_sw_mpu_rw_mc_ctrl___keep_owner___bit 0 +#define reg_iop_sw_mpu_rw_mc_ctrl___cmd___lsb 1 +#define reg_iop_sw_mpu_rw_mc_ctrl___cmd___width 2 +#define reg_iop_sw_mpu_rw_mc_ctrl___size___lsb 3 +#define reg_iop_sw_mpu_rw_mc_ctrl___size___width 3 +#define reg_iop_sw_mpu_rw_mc_ctrl___wr_spu_mem___lsb 6 +#define reg_iop_sw_mpu_rw_mc_ctrl___wr_spu_mem___width 1 +#define reg_iop_sw_mpu_rw_mc_ctrl___wr_spu_mem___bit 6 +#define reg_iop_sw_mpu_rw_mc_ctrl_offset 12 + +/* Register rw_mc_data, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_mc_data___val___lsb 0 +#define reg_iop_sw_mpu_rw_mc_data___val___width 32 +#define reg_iop_sw_mpu_rw_mc_data_offset 16 + +/* Register rw_mc_addr, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_mc_addr_offset 20 + +/* Register rs_mc_data, scope iop_sw_mpu, type rs */ +#define reg_iop_sw_mpu_rs_mc_data_offset 24 + +/* Register r_mc_data, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_mc_data_offset 28 + +/* Register r_mc_stat, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_mc_stat___busy_cpu___lsb 0 +#define reg_iop_sw_mpu_r_mc_stat___busy_cpu___width 1 +#define reg_iop_sw_mpu_r_mc_stat___busy_cpu___bit 0 +#define reg_iop_sw_mpu_r_mc_stat___busy_mpu___lsb 1 +#define reg_iop_sw_mpu_r_mc_stat___busy_mpu___width 1 +#define reg_iop_sw_mpu_r_mc_stat___busy_mpu___bit 1 +#define reg_iop_sw_mpu_r_mc_stat___busy_spu___lsb 2 +#define reg_iop_sw_mpu_r_mc_stat___busy_spu___width 1 +#define reg_iop_sw_mpu_r_mc_stat___busy_spu___bit 2 +#define reg_iop_sw_mpu_r_mc_stat___owned_by_cpu___lsb 3 +#define reg_iop_sw_mpu_r_mc_stat___owned_by_cpu___width 1 +#define reg_iop_sw_mpu_r_mc_stat___owned_by_cpu___bit 3 +#define reg_iop_sw_mpu_r_mc_stat___owned_by_mpu___lsb 4 +#define reg_iop_sw_mpu_r_mc_stat___owned_by_mpu___width 1 +#define reg_iop_sw_mpu_r_mc_stat___owned_by_mpu___bit 4 +#define reg_iop_sw_mpu_r_mc_stat___owned_by_spu___lsb 5 +#define reg_iop_sw_mpu_r_mc_stat___owned_by_spu___width 1 +#define reg_iop_sw_mpu_r_mc_stat___owned_by_spu___bit 5 +#define reg_iop_sw_mpu_r_mc_stat_offset 32 + +/* Register rw_bus_clr_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_bus_clr_mask___byte0___lsb 0 +#define reg_iop_sw_mpu_rw_bus_clr_mask___byte0___width 8 +#define reg_iop_sw_mpu_rw_bus_clr_mask___byte1___lsb 8 +#define reg_iop_sw_mpu_rw_bus_clr_mask___byte1___width 8 +#define reg_iop_sw_mpu_rw_bus_clr_mask___byte2___lsb 16 +#define reg_iop_sw_mpu_rw_bus_clr_mask___byte2___width 8 +#define reg_iop_sw_mpu_rw_bus_clr_mask___byte3___lsb 24 +#define reg_iop_sw_mpu_rw_bus_clr_mask___byte3___width 8 +#define reg_iop_sw_mpu_rw_bus_clr_mask_offset 36 + +/* Register rw_bus_set_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_bus_set_mask___byte0___lsb 0 +#define reg_iop_sw_mpu_rw_bus_set_mask___byte0___width 8 +#define reg_iop_sw_mpu_rw_bus_set_mask___byte1___lsb 8 +#define reg_iop_sw_mpu_rw_bus_set_mask___byte1___width 8 +#define reg_iop_sw_mpu_rw_bus_set_mask___byte2___lsb 16 +#define reg_iop_sw_mpu_rw_bus_set_mask___byte2___width 8 +#define reg_iop_sw_mpu_rw_bus_set_mask___byte3___lsb 24 +#define reg_iop_sw_mpu_rw_bus_set_mask___byte3___width 8 +#define reg_iop_sw_mpu_rw_bus_set_mask_offset 40 + +/* Register rw_bus_oe_clr_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte0___lsb 0 +#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte0___width 1 +#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte0___bit 0 +#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte1___lsb 1 +#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte1___width 1 +#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte1___bit 1 +#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte2___lsb 2 +#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte2___width 1 +#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte2___bit 2 +#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte3___lsb 3 +#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte3___width 1 +#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte3___bit 3 +#define reg_iop_sw_mpu_rw_bus_oe_clr_mask_offset 44 + +/* Register rw_bus_oe_set_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte0___lsb 0 +#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte0___width 1 +#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte0___bit 0 +#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte1___lsb 1 +#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte1___width 1 +#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte1___bit 1 +#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte2___lsb 2 +#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte2___width 1 +#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte2___bit 2 +#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte3___lsb 3 +#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte3___width 1 +#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte3___bit 3 +#define reg_iop_sw_mpu_rw_bus_oe_set_mask_offset 48 + +/* Register r_bus_in, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_bus_in_offset 52 + +/* Register rw_gio_clr_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_gio_clr_mask___val___lsb 0 +#define reg_iop_sw_mpu_rw_gio_clr_mask___val___width 32 +#define reg_iop_sw_mpu_rw_gio_clr_mask_offset 56 + +/* Register rw_gio_set_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_gio_set_mask___val___lsb 0 +#define reg_iop_sw_mpu_rw_gio_set_mask___val___width 32 +#define reg_iop_sw_mpu_rw_gio_set_mask_offset 60 + +/* Register rw_gio_oe_clr_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_gio_oe_clr_mask___val___lsb 0 +#define reg_iop_sw_mpu_rw_gio_oe_clr_mask___val___width 32 +#define reg_iop_sw_mpu_rw_gio_oe_clr_mask_offset 64 + +/* Register rw_gio_oe_set_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_gio_oe_set_mask___val___lsb 0 +#define reg_iop_sw_mpu_rw_gio_oe_set_mask___val___width 32 +#define reg_iop_sw_mpu_rw_gio_oe_set_mask_offset 68 + +/* Register r_gio_in, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_gio_in_offset 72 + +/* Register rw_cpu_intr, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_cpu_intr___intr0___lsb 0 +#define reg_iop_sw_mpu_rw_cpu_intr___intr0___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr0___bit 0 +#define reg_iop_sw_mpu_rw_cpu_intr___intr1___lsb 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr1___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr1___bit 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr2___lsb 2 +#define reg_iop_sw_mpu_rw_cpu_intr___intr2___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr2___bit 2 +#define reg_iop_sw_mpu_rw_cpu_intr___intr3___lsb 3 +#define reg_iop_sw_mpu_rw_cpu_intr___intr3___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr3___bit 3 +#define reg_iop_sw_mpu_rw_cpu_intr___intr4___lsb 4 +#define reg_iop_sw_mpu_rw_cpu_intr___intr4___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr4___bit 4 +#define reg_iop_sw_mpu_rw_cpu_intr___intr5___lsb 5 +#define reg_iop_sw_mpu_rw_cpu_intr___intr5___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr5___bit 5 +#define reg_iop_sw_mpu_rw_cpu_intr___intr6___lsb 6 +#define reg_iop_sw_mpu_rw_cpu_intr___intr6___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr6___bit 6 +#define reg_iop_sw_mpu_rw_cpu_intr___intr7___lsb 7 +#define reg_iop_sw_mpu_rw_cpu_intr___intr7___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr7___bit 7 +#define reg_iop_sw_mpu_rw_cpu_intr___intr8___lsb 8 +#define reg_iop_sw_mpu_rw_cpu_intr___intr8___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr8___bit 8 +#define reg_iop_sw_mpu_rw_cpu_intr___intr9___lsb 9 +#define reg_iop_sw_mpu_rw_cpu_intr___intr9___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr9___bit 9 +#define reg_iop_sw_mpu_rw_cpu_intr___intr10___lsb 10 +#define reg_iop_sw_mpu_rw_cpu_intr___intr10___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr10___bit 10 +#define reg_iop_sw_mpu_rw_cpu_intr___intr11___lsb 11 +#define reg_iop_sw_mpu_rw_cpu_intr___intr11___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr11___bit 11 +#define reg_iop_sw_mpu_rw_cpu_intr___intr12___lsb 12 +#define reg_iop_sw_mpu_rw_cpu_intr___intr12___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr12___bit 12 +#define reg_iop_sw_mpu_rw_cpu_intr___intr13___lsb 13 +#define reg_iop_sw_mpu_rw_cpu_intr___intr13___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr13___bit 13 +#define reg_iop_sw_mpu_rw_cpu_intr___intr14___lsb 14 +#define reg_iop_sw_mpu_rw_cpu_intr___intr14___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr14___bit 14 +#define reg_iop_sw_mpu_rw_cpu_intr___intr15___lsb 15 +#define reg_iop_sw_mpu_rw_cpu_intr___intr15___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr15___bit 15 +#define reg_iop_sw_mpu_rw_cpu_intr___intr16___lsb 16 +#define reg_iop_sw_mpu_rw_cpu_intr___intr16___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr16___bit 16 +#define reg_iop_sw_mpu_rw_cpu_intr___intr17___lsb 17 +#define reg_iop_sw_mpu_rw_cpu_intr___intr17___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr17___bit 17 +#define reg_iop_sw_mpu_rw_cpu_intr___intr18___lsb 18 +#define reg_iop_sw_mpu_rw_cpu_intr___intr18___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr18___bit 18 +#define reg_iop_sw_mpu_rw_cpu_intr___intr19___lsb 19 +#define reg_iop_sw_mpu_rw_cpu_intr___intr19___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr19___bit 19 +#define reg_iop_sw_mpu_rw_cpu_intr___intr20___lsb 20 +#define reg_iop_sw_mpu_rw_cpu_intr___intr20___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr20___bit 20 +#define reg_iop_sw_mpu_rw_cpu_intr___intr21___lsb 21 +#define reg_iop_sw_mpu_rw_cpu_intr___intr21___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr21___bit 21 +#define reg_iop_sw_mpu_rw_cpu_intr___intr22___lsb 22 +#define reg_iop_sw_mpu_rw_cpu_intr___intr22___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr22___bit 22 +#define reg_iop_sw_mpu_rw_cpu_intr___intr23___lsb 23 +#define reg_iop_sw_mpu_rw_cpu_intr___intr23___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr23___bit 23 +#define reg_iop_sw_mpu_rw_cpu_intr___intr24___lsb 24 +#define reg_iop_sw_mpu_rw_cpu_intr___intr24___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr24___bit 24 +#define reg_iop_sw_mpu_rw_cpu_intr___intr25___lsb 25 +#define reg_iop_sw_mpu_rw_cpu_intr___intr25___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr25___bit 25 +#define reg_iop_sw_mpu_rw_cpu_intr___intr26___lsb 26 +#define reg_iop_sw_mpu_rw_cpu_intr___intr26___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr26___bit 26 +#define reg_iop_sw_mpu_rw_cpu_intr___intr27___lsb 27 +#define reg_iop_sw_mpu_rw_cpu_intr___intr27___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr27___bit 27 +#define reg_iop_sw_mpu_rw_cpu_intr___intr28___lsb 28 +#define reg_iop_sw_mpu_rw_cpu_intr___intr28___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr28___bit 28 +#define reg_iop_sw_mpu_rw_cpu_intr___intr29___lsb 29 +#define reg_iop_sw_mpu_rw_cpu_intr___intr29___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr29___bit 29 +#define reg_iop_sw_mpu_rw_cpu_intr___intr30___lsb 30 +#define reg_iop_sw_mpu_rw_cpu_intr___intr30___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr30___bit 30 +#define reg_iop_sw_mpu_rw_cpu_intr___intr31___lsb 31 +#define reg_iop_sw_mpu_rw_cpu_intr___intr31___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr31___bit 31 +#define reg_iop_sw_mpu_rw_cpu_intr_offset 76 + +/* Register r_cpu_intr, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_cpu_intr___intr0___lsb 0 +#define reg_iop_sw_mpu_r_cpu_intr___intr0___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr0___bit 0 +#define reg_iop_sw_mpu_r_cpu_intr___intr1___lsb 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr1___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr1___bit 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr2___lsb 2 +#define reg_iop_sw_mpu_r_cpu_intr___intr2___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr2___bit 2 +#define reg_iop_sw_mpu_r_cpu_intr___intr3___lsb 3 +#define reg_iop_sw_mpu_r_cpu_intr___intr3___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr3___bit 3 +#define reg_iop_sw_mpu_r_cpu_intr___intr4___lsb 4 +#define reg_iop_sw_mpu_r_cpu_intr___intr4___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr4___bit 4 +#define reg_iop_sw_mpu_r_cpu_intr___intr5___lsb 5 +#define reg_iop_sw_mpu_r_cpu_intr___intr5___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr5___bit 5 +#define reg_iop_sw_mpu_r_cpu_intr___intr6___lsb 6 +#define reg_iop_sw_mpu_r_cpu_intr___intr6___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr6___bit 6 +#define reg_iop_sw_mpu_r_cpu_intr___intr7___lsb 7 +#define reg_iop_sw_mpu_r_cpu_intr___intr7___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr7___bit 7 +#define reg_iop_sw_mpu_r_cpu_intr___intr8___lsb 8 +#define reg_iop_sw_mpu_r_cpu_intr___intr8___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr8___bit 8 +#define reg_iop_sw_mpu_r_cpu_intr___intr9___lsb 9 +#define reg_iop_sw_mpu_r_cpu_intr___intr9___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr9___bit 9 +#define reg_iop_sw_mpu_r_cpu_intr___intr10___lsb 10 +#define reg_iop_sw_mpu_r_cpu_intr___intr10___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr10___bit 10 +#define reg_iop_sw_mpu_r_cpu_intr___intr11___lsb 11 +#define reg_iop_sw_mpu_r_cpu_intr___intr11___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr11___bit 11 +#define reg_iop_sw_mpu_r_cpu_intr___intr12___lsb 12 +#define reg_iop_sw_mpu_r_cpu_intr___intr12___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr12___bit 12 +#define reg_iop_sw_mpu_r_cpu_intr___intr13___lsb 13 +#define reg_iop_sw_mpu_r_cpu_intr___intr13___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr13___bit 13 +#define reg_iop_sw_mpu_r_cpu_intr___intr14___lsb 14 +#define reg_iop_sw_mpu_r_cpu_intr___intr14___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr14___bit 14 +#define reg_iop_sw_mpu_r_cpu_intr___intr15___lsb 15 +#define reg_iop_sw_mpu_r_cpu_intr___intr15___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr15___bit 15 +#define reg_iop_sw_mpu_r_cpu_intr___intr16___lsb 16 +#define reg_iop_sw_mpu_r_cpu_intr___intr16___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr16___bit 16 +#define reg_iop_sw_mpu_r_cpu_intr___intr17___lsb 17 +#define reg_iop_sw_mpu_r_cpu_intr___intr17___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr17___bit 17 +#define reg_iop_sw_mpu_r_cpu_intr___intr18___lsb 18 +#define reg_iop_sw_mpu_r_cpu_intr___intr18___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr18___bit 18 +#define reg_iop_sw_mpu_r_cpu_intr___intr19___lsb 19 +#define reg_iop_sw_mpu_r_cpu_intr___intr19___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr19___bit 19 +#define reg_iop_sw_mpu_r_cpu_intr___intr20___lsb 20 +#define reg_iop_sw_mpu_r_cpu_intr___intr20___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr20___bit 20 +#define reg_iop_sw_mpu_r_cpu_intr___intr21___lsb 21 +#define reg_iop_sw_mpu_r_cpu_intr___intr21___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr21___bit 21 +#define reg_iop_sw_mpu_r_cpu_intr___intr22___lsb 22 +#define reg_iop_sw_mpu_r_cpu_intr___intr22___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr22___bit 22 +#define reg_iop_sw_mpu_r_cpu_intr___intr23___lsb 23 +#define reg_iop_sw_mpu_r_cpu_intr___intr23___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr23___bit 23 +#define reg_iop_sw_mpu_r_cpu_intr___intr24___lsb 24 +#define reg_iop_sw_mpu_r_cpu_intr___intr24___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr24___bit 24 +#define reg_iop_sw_mpu_r_cpu_intr___intr25___lsb 25 +#define reg_iop_sw_mpu_r_cpu_intr___intr25___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr25___bit 25 +#define reg_iop_sw_mpu_r_cpu_intr___intr26___lsb 26 +#define reg_iop_sw_mpu_r_cpu_intr___intr26___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr26___bit 26 +#define reg_iop_sw_mpu_r_cpu_intr___intr27___lsb 27 +#define reg_iop_sw_mpu_r_cpu_intr___intr27___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr27___bit 27 +#define reg_iop_sw_mpu_r_cpu_intr___intr28___lsb 28 +#define reg_iop_sw_mpu_r_cpu_intr___intr28___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr28___bit 28 +#define reg_iop_sw_mpu_r_cpu_intr___intr29___lsb 29 +#define reg_iop_sw_mpu_r_cpu_intr___intr29___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr29___bit 29 +#define reg_iop_sw_mpu_r_cpu_intr___intr30___lsb 30 +#define reg_iop_sw_mpu_r_cpu_intr___intr30___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr30___bit 30 +#define reg_iop_sw_mpu_r_cpu_intr___intr31___lsb 31 +#define reg_iop_sw_mpu_r_cpu_intr___intr31___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr31___bit 31 +#define reg_iop_sw_mpu_r_cpu_intr_offset 80 + +/* Register rw_intr_grp0_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr0___lsb 0 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr0___bit 0 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp0___lsb 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp0___bit 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp0___lsb 2 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp0___bit 2 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out___lsb 3 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out___bit 3 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr1___lsb 4 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr1___bit 4 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp1___lsb 5 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp1___bit 5 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp1___lsb 6 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp1___bit 6 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in___lsb 7 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in___bit 7 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr2___lsb 8 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr2___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr2___bit 8 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp2___lsb 9 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp2___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp2___bit 9 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out_extra___lsb 10 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out_extra___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out_extra___bit 10 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_out___lsb 11 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_out___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_out___bit 11 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr3___lsb 12 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr3___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr3___bit 12 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp3___lsb 13 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp3___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp3___bit 13 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in_extra___lsb 14 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in_extra___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in_extra___bit 14 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_in___lsb 15 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_in___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_in___bit 15 +#define reg_iop_sw_mpu_rw_intr_grp0_mask_offset 84 + +/* Register rw_ack_intr_grp0, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr0___lsb 0 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr0___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr0___bit 0 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr1___lsb 4 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr1___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr1___bit 4 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr2___lsb 8 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr2___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr2___bit 8 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr3___lsb 12 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr3___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr3___bit 12 +#define reg_iop_sw_mpu_rw_ack_intr_grp0_offset 88 + +/* Register r_intr_grp0, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_intr_grp0___spu_intr0___lsb 0 +#define reg_iop_sw_mpu_r_intr_grp0___spu_intr0___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___spu_intr0___bit 0 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp0___lsb 1 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp0___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp0___bit 1 +#define reg_iop_sw_mpu_r_intr_grp0___timer_grp0___lsb 2 +#define reg_iop_sw_mpu_r_intr_grp0___timer_grp0___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___timer_grp0___bit 2 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_out___lsb 3 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_out___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_out___bit 3 +#define reg_iop_sw_mpu_r_intr_grp0___spu_intr1___lsb 4 +#define reg_iop_sw_mpu_r_intr_grp0___spu_intr1___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___spu_intr1___bit 4 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp1___lsb 5 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp1___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp1___bit 5 +#define reg_iop_sw_mpu_r_intr_grp0___timer_grp1___lsb 6 +#define reg_iop_sw_mpu_r_intr_grp0___timer_grp1___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___timer_grp1___bit 6 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_in___lsb 7 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_in___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_in___bit 7 +#define reg_iop_sw_mpu_r_intr_grp0___spu_intr2___lsb 8 +#define reg_iop_sw_mpu_r_intr_grp0___spu_intr2___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___spu_intr2___bit 8 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp2___lsb 9 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp2___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp2___bit 9 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_out_extra___lsb 10 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_out_extra___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_out_extra___bit 10 +#define reg_iop_sw_mpu_r_intr_grp0___dmc_out___lsb 11 +#define reg_iop_sw_mpu_r_intr_grp0___dmc_out___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___dmc_out___bit 11 +#define reg_iop_sw_mpu_r_intr_grp0___spu_intr3___lsb 12 +#define reg_iop_sw_mpu_r_intr_grp0___spu_intr3___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___spu_intr3___bit 12 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp3___lsb 13 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp3___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp3___bit 13 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_in_extra___lsb 14 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_in_extra___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_in_extra___bit 14 +#define reg_iop_sw_mpu_r_intr_grp0___dmc_in___lsb 15 +#define reg_iop_sw_mpu_r_intr_grp0___dmc_in___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___dmc_in___bit 15 +#define reg_iop_sw_mpu_r_intr_grp0_offset 92 + +/* Register r_masked_intr_grp0, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr0___lsb 0 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr0___bit 0 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp0___lsb 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp0___bit 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp0___lsb 2 +#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp0___bit 2 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out___lsb 3 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out___bit 3 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr1___lsb 4 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr1___bit 4 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp1___lsb 5 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp1___bit 5 +#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp1___lsb 6 +#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp1___bit 6 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in___lsb 7 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in___bit 7 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr2___lsb 8 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr2___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr2___bit 8 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp2___lsb 9 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp2___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp2___bit 9 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out_extra___lsb 10 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out_extra___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out_extra___bit 10 +#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_out___lsb 11 +#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_out___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_out___bit 11 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr3___lsb 12 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr3___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr3___bit 12 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp3___lsb 13 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp3___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp3___bit 13 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in_extra___lsb 14 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in_extra___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in_extra___bit 14 +#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_in___lsb 15 +#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_in___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_in___bit 15 +#define reg_iop_sw_mpu_r_masked_intr_grp0_offset 96 + +/* Register rw_intr_grp1_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr4___lsb 0 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr4___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr4___bit 0 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp4___lsb 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp4___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp4___bit 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out_extra___lsb 2 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out_extra___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out_extra___bit 2 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_out___lsb 3 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_out___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_out___bit 3 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr5___lsb 4 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr5___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr5___bit 4 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp5___lsb 5 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp5___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp5___bit 5 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in_extra___lsb 6 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in_extra___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in_extra___bit 6 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_in___lsb 7 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_in___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_in___bit 7 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr6___lsb 8 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr6___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr6___bit 8 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp6___lsb 9 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp6___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp6___bit 9 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp0___lsb 10 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp0___bit 10 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out___lsb 11 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out___bit 11 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr7___lsb 12 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr7___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr7___bit 12 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp7___lsb 13 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp7___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp7___bit 13 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp1___lsb 14 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp1___bit 14 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in___lsb 15 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in___bit 15 +#define reg_iop_sw_mpu_rw_intr_grp1_mask_offset 100 + +/* Register rw_ack_intr_grp1, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr4___lsb 0 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr4___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr4___bit 0 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr5___lsb 4 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr5___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr5___bit 4 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr6___lsb 8 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr6___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr6___bit 8 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr7___lsb 12 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr7___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr7___bit 12 +#define reg_iop_sw_mpu_rw_ack_intr_grp1_offset 104 + +/* Register r_intr_grp1, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_intr_grp1___spu_intr4___lsb 0 +#define reg_iop_sw_mpu_r_intr_grp1___spu_intr4___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___spu_intr4___bit 0 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp4___lsb 1 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp4___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp4___bit 1 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_out_extra___lsb 2 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_out_extra___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_out_extra___bit 2 +#define reg_iop_sw_mpu_r_intr_grp1___dmc_out___lsb 3 +#define reg_iop_sw_mpu_r_intr_grp1___dmc_out___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___dmc_out___bit 3 +#define reg_iop_sw_mpu_r_intr_grp1___spu_intr5___lsb 4 +#define reg_iop_sw_mpu_r_intr_grp1___spu_intr5___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___spu_intr5___bit 4 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp5___lsb 5 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp5___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp5___bit 5 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_in_extra___lsb 6 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_in_extra___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_in_extra___bit 6 +#define reg_iop_sw_mpu_r_intr_grp1___dmc_in___lsb 7 +#define reg_iop_sw_mpu_r_intr_grp1___dmc_in___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___dmc_in___bit 7 +#define reg_iop_sw_mpu_r_intr_grp1___spu_intr6___lsb 8 +#define reg_iop_sw_mpu_r_intr_grp1___spu_intr6___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___spu_intr6___bit 8 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp6___lsb 9 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp6___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp6___bit 9 +#define reg_iop_sw_mpu_r_intr_grp1___timer_grp0___lsb 10 +#define reg_iop_sw_mpu_r_intr_grp1___timer_grp0___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___timer_grp0___bit 10 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_out___lsb 11 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_out___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_out___bit 11 +#define reg_iop_sw_mpu_r_intr_grp1___spu_intr7___lsb 12 +#define reg_iop_sw_mpu_r_intr_grp1___spu_intr7___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___spu_intr7___bit 12 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp7___lsb 13 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp7___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp7___bit 13 +#define reg_iop_sw_mpu_r_intr_grp1___timer_grp1___lsb 14 +#define reg_iop_sw_mpu_r_intr_grp1___timer_grp1___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___timer_grp1___bit 14 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_in___lsb 15 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_in___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_in___bit 15 +#define reg_iop_sw_mpu_r_intr_grp1_offset 108 + +/* Register r_masked_intr_grp1, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr4___lsb 0 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr4___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr4___bit 0 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp4___lsb 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp4___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp4___bit 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out_extra___lsb 2 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out_extra___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out_extra___bit 2 +#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_out___lsb 3 +#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_out___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_out___bit 3 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr5___lsb 4 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr5___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr5___bit 4 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp5___lsb 5 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp5___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp5___bit 5 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in_extra___lsb 6 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in_extra___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in_extra___bit 6 +#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_in___lsb 7 +#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_in___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_in___bit 7 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr6___lsb 8 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr6___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr6___bit 8 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp6___lsb 9 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp6___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp6___bit 9 +#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp0___lsb 10 +#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp0___bit 10 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out___lsb 11 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out___bit 11 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr7___lsb 12 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr7___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr7___bit 12 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp7___lsb 13 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp7___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp7___bit 13 +#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp1___lsb 14 +#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp1___bit 14 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in___lsb 15 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in___bit 15 +#define reg_iop_sw_mpu_r_masked_intr_grp1_offset 112 + +/* Register rw_intr_grp2_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr8___lsb 0 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr8___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr8___bit 0 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp0___lsb 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp0___bit 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp0___lsb 2 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp0___bit 2 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out___lsb 3 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out___bit 3 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr9___lsb 4 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr9___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr9___bit 4 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp1___lsb 5 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp1___bit 5 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp1___lsb 6 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp1___bit 6 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in___lsb 7 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in___bit 7 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr10___lsb 8 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr10___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr10___bit 8 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp2___lsb 9 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp2___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp2___bit 9 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out_extra___lsb 10 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out_extra___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out_extra___bit 10 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_out___lsb 11 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_out___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_out___bit 11 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr11___lsb 12 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr11___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr11___bit 12 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp3___lsb 13 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp3___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp3___bit 13 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in_extra___lsb 14 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in_extra___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in_extra___bit 14 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_in___lsb 15 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_in___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_in___bit 15 +#define reg_iop_sw_mpu_rw_intr_grp2_mask_offset 116 + +/* Register rw_ack_intr_grp2, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr8___lsb 0 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr8___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr8___bit 0 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr9___lsb 4 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr9___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr9___bit 4 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr10___lsb 8 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr10___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr10___bit 8 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr11___lsb 12 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr11___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr11___bit 12 +#define reg_iop_sw_mpu_rw_ack_intr_grp2_offset 120 + +/* Register r_intr_grp2, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_intr_grp2___spu_intr8___lsb 0 +#define reg_iop_sw_mpu_r_intr_grp2___spu_intr8___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___spu_intr8___bit 0 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp0___lsb 1 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp0___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp0___bit 1 +#define reg_iop_sw_mpu_r_intr_grp2___timer_grp0___lsb 2 +#define reg_iop_sw_mpu_r_intr_grp2___timer_grp0___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___timer_grp0___bit 2 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_out___lsb 3 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_out___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_out___bit 3 +#define reg_iop_sw_mpu_r_intr_grp2___spu_intr9___lsb 4 +#define reg_iop_sw_mpu_r_intr_grp2___spu_intr9___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___spu_intr9___bit 4 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp1___lsb 5 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp1___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp1___bit 5 +#define reg_iop_sw_mpu_r_intr_grp2___timer_grp1___lsb 6 +#define reg_iop_sw_mpu_r_intr_grp2___timer_grp1___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___timer_grp1___bit 6 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_in___lsb 7 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_in___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_in___bit 7 +#define reg_iop_sw_mpu_r_intr_grp2___spu_intr10___lsb 8 +#define reg_iop_sw_mpu_r_intr_grp2___spu_intr10___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___spu_intr10___bit 8 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp2___lsb 9 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp2___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp2___bit 9 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_out_extra___lsb 10 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_out_extra___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_out_extra___bit 10 +#define reg_iop_sw_mpu_r_intr_grp2___dmc_out___lsb 11 +#define reg_iop_sw_mpu_r_intr_grp2___dmc_out___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___dmc_out___bit 11 +#define reg_iop_sw_mpu_r_intr_grp2___spu_intr11___lsb 12 +#define reg_iop_sw_mpu_r_intr_grp2___spu_intr11___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___spu_intr11___bit 12 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp3___lsb 13 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp3___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp3___bit 13 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_in_extra___lsb 14 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_in_extra___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_in_extra___bit 14 +#define reg_iop_sw_mpu_r_intr_grp2___dmc_in___lsb 15 +#define reg_iop_sw_mpu_r_intr_grp2___dmc_in___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___dmc_in___bit 15 +#define reg_iop_sw_mpu_r_intr_grp2_offset 124 + +/* Register r_masked_intr_grp2, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr8___lsb 0 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr8___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr8___bit 0 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp0___lsb 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp0___bit 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp0___lsb 2 +#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp0___bit 2 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out___lsb 3 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out___bit 3 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr9___lsb 4 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr9___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr9___bit 4 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp1___lsb 5 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp1___bit 5 +#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp1___lsb 6 +#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp1___bit 6 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in___lsb 7 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in___bit 7 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr10___lsb 8 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr10___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr10___bit 8 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp2___lsb 9 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp2___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp2___bit 9 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out_extra___lsb 10 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out_extra___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out_extra___bit 10 +#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_out___lsb 11 +#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_out___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_out___bit 11 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr11___lsb 12 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr11___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr11___bit 12 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp3___lsb 13 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp3___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp3___bit 13 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in_extra___lsb 14 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in_extra___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in_extra___bit 14 +#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_in___lsb 15 +#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_in___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_in___bit 15 +#define reg_iop_sw_mpu_r_masked_intr_grp2_offset 128 + +/* Register rw_intr_grp3_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr12___lsb 0 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr12___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr12___bit 0 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp4___lsb 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp4___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp4___bit 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out_extra___lsb 2 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out_extra___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out_extra___bit 2 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_out___lsb 3 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_out___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_out___bit 3 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr13___lsb 4 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr13___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr13___bit 4 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp5___lsb 5 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp5___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp5___bit 5 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in_extra___lsb 6 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in_extra___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in_extra___bit 6 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_in___lsb 7 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_in___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_in___bit 7 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr14___lsb 8 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr14___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr14___bit 8 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp6___lsb 9 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp6___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp6___bit 9 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp0___lsb 10 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp0___bit 10 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out___lsb 11 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out___bit 11 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr15___lsb 12 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr15___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr15___bit 12 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp7___lsb 13 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp7___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp7___bit 13 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp1___lsb 14 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp1___bit 14 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in___lsb 15 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in___bit 15 +#define reg_iop_sw_mpu_rw_intr_grp3_mask_offset 132 + +/* Register rw_ack_intr_grp3, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr12___lsb 0 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr12___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr12___bit 0 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr13___lsb 4 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr13___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr13___bit 4 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr14___lsb 8 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr14___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr14___bit 8 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr15___lsb 12 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr15___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr15___bit 12 +#define reg_iop_sw_mpu_rw_ack_intr_grp3_offset 136 + +/* Register r_intr_grp3, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_intr_grp3___spu_intr12___lsb 0 +#define reg_iop_sw_mpu_r_intr_grp3___spu_intr12___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___spu_intr12___bit 0 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp4___lsb 1 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp4___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp4___bit 1 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_out_extra___lsb 2 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_out_extra___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_out_extra___bit 2 +#define reg_iop_sw_mpu_r_intr_grp3___dmc_out___lsb 3 +#define reg_iop_sw_mpu_r_intr_grp3___dmc_out___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___dmc_out___bit 3 +#define reg_iop_sw_mpu_r_intr_grp3___spu_intr13___lsb 4 +#define reg_iop_sw_mpu_r_intr_grp3___spu_intr13___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___spu_intr13___bit 4 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp5___lsb 5 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp5___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp5___bit 5 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_in_extra___lsb 6 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_in_extra___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_in_extra___bit 6 +#define reg_iop_sw_mpu_r_intr_grp3___dmc_in___lsb 7 +#define reg_iop_sw_mpu_r_intr_grp3___dmc_in___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___dmc_in___bit 7 +#define reg_iop_sw_mpu_r_intr_grp3___spu_intr14___lsb 8 +#define reg_iop_sw_mpu_r_intr_grp3___spu_intr14___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___spu_intr14___bit 8 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp6___lsb 9 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp6___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp6___bit 9 +#define reg_iop_sw_mpu_r_intr_grp3___timer_grp0___lsb 10 +#define reg_iop_sw_mpu_r_intr_grp3___timer_grp0___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___timer_grp0___bit 10 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_out___lsb 11 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_out___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_out___bit 11 +#define reg_iop_sw_mpu_r_intr_grp3___spu_intr15___lsb 12 +#define reg_iop_sw_mpu_r_intr_grp3___spu_intr15___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___spu_intr15___bit 12 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp7___lsb 13 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp7___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp7___bit 13 +#define reg_iop_sw_mpu_r_intr_grp3___timer_grp1___lsb 14 +#define reg_iop_sw_mpu_r_intr_grp3___timer_grp1___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___timer_grp1___bit 14 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_in___lsb 15 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_in___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_in___bit 15 +#define reg_iop_sw_mpu_r_intr_grp3_offset 140 + +/* Register r_masked_intr_grp3, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr12___lsb 0 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr12___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr12___bit 0 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp4___lsb 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp4___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp4___bit 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out_extra___lsb 2 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out_extra___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out_extra___bit 2 +#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_out___lsb 3 +#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_out___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_out___bit 3 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr13___lsb 4 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr13___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr13___bit 4 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp5___lsb 5 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp5___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp5___bit 5 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in_extra___lsb 6 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in_extra___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in_extra___bit 6 +#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_in___lsb 7 +#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_in___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_in___bit 7 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr14___lsb 8 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr14___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr14___bit 8 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp6___lsb 9 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp6___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp6___bit 9 +#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp0___lsb 10 +#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp0___bit 10 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out___lsb 11 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out___bit 11 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr15___lsb 12 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr15___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr15___bit 12 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp7___lsb 13 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp7___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp7___bit 13 +#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp1___lsb 14 +#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp1___bit 14 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in___lsb 15 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in___bit 15 +#define reg_iop_sw_mpu_r_masked_intr_grp3_offset 144 + + +/* Constants */ +#define regk_iop_sw_mpu_copy 0x00000000 +#define regk_iop_sw_mpu_cpu 0x00000000 +#define regk_iop_sw_mpu_mpu 0x00000001 +#define regk_iop_sw_mpu_no 0x00000000 +#define regk_iop_sw_mpu_nop 0x00000000 +#define regk_iop_sw_mpu_rd 0x00000002 +#define regk_iop_sw_mpu_reg_copy 0x00000001 +#define regk_iop_sw_mpu_rw_bus_clr_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_bus_oe_clr_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_bus_oe_set_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_bus_set_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_gio_clr_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_gio_oe_clr_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_gio_oe_set_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_gio_set_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_intr_grp0_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_intr_grp1_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_intr_grp2_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_intr_grp3_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_sw_cfg_owner_default 0x00000000 +#define regk_iop_sw_mpu_set 0x00000001 +#define regk_iop_sw_mpu_spu 0x00000002 +#define regk_iop_sw_mpu_wr 0x00000003 +#define regk_iop_sw_mpu_yes 0x00000001 +#endif /* __iop_sw_mpu_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sw_spu_defs_asm.h b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sw_spu_defs_asm.h new file mode 100644 index 000000000000..67a745338087 --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sw_spu_defs_asm.h @@ -0,0 +1,523 @@ +#ifndef __iop_sw_spu_defs_asm_h +#define __iop_sw_spu_defs_asm_h + +/* + * This file is autogenerated from + * file: iop_sw_spu.r + * + * by ../../../tools/rdesc/bin/rdes2c -asm -outfile iop_sw_spu_defs_asm.h iop_sw_spu.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register r_mpu_trace, scope iop_sw_spu, type r */ +#define reg_iop_sw_spu_r_mpu_trace_offset 0 + +/* Register rw_mc_ctrl, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_mc_ctrl___keep_owner___lsb 0 +#define reg_iop_sw_spu_rw_mc_ctrl___keep_owner___width 1 +#define reg_iop_sw_spu_rw_mc_ctrl___keep_owner___bit 0 +#define reg_iop_sw_spu_rw_mc_ctrl___cmd___lsb 1 +#define reg_iop_sw_spu_rw_mc_ctrl___cmd___width 2 +#define reg_iop_sw_spu_rw_mc_ctrl___size___lsb 3 +#define reg_iop_sw_spu_rw_mc_ctrl___size___width 3 +#define reg_iop_sw_spu_rw_mc_ctrl___wr_spu_mem___lsb 6 +#define reg_iop_sw_spu_rw_mc_ctrl___wr_spu_mem___width 1 +#define reg_iop_sw_spu_rw_mc_ctrl___wr_spu_mem___bit 6 +#define reg_iop_sw_spu_rw_mc_ctrl_offset 4 + +/* Register rw_mc_data, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_mc_data___val___lsb 0 +#define reg_iop_sw_spu_rw_mc_data___val___width 32 +#define reg_iop_sw_spu_rw_mc_data_offset 8 + +/* Register rw_mc_addr, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_mc_addr_offset 12 + +/* Register rs_mc_data, scope iop_sw_spu, type rs */ +#define reg_iop_sw_spu_rs_mc_data_offset 16 + +/* Register r_mc_data, scope iop_sw_spu, type r */ +#define reg_iop_sw_spu_r_mc_data_offset 20 + +/* Register r_mc_stat, scope iop_sw_spu, type r */ +#define reg_iop_sw_spu_r_mc_stat___busy_cpu___lsb 0 +#define reg_iop_sw_spu_r_mc_stat___busy_cpu___width 1 +#define reg_iop_sw_spu_r_mc_stat___busy_cpu___bit 0 +#define reg_iop_sw_spu_r_mc_stat___busy_mpu___lsb 1 +#define reg_iop_sw_spu_r_mc_stat___busy_mpu___width 1 +#define reg_iop_sw_spu_r_mc_stat___busy_mpu___bit 1 +#define reg_iop_sw_spu_r_mc_stat___busy_spu___lsb 2 +#define reg_iop_sw_spu_r_mc_stat___busy_spu___width 1 +#define reg_iop_sw_spu_r_mc_stat___busy_spu___bit 2 +#define reg_iop_sw_spu_r_mc_stat___owned_by_cpu___lsb 3 +#define reg_iop_sw_spu_r_mc_stat___owned_by_cpu___width 1 +#define reg_iop_sw_spu_r_mc_stat___owned_by_cpu___bit 3 +#define reg_iop_sw_spu_r_mc_stat___owned_by_mpu___lsb 4 +#define reg_iop_sw_spu_r_mc_stat___owned_by_mpu___width 1 +#define reg_iop_sw_spu_r_mc_stat___owned_by_mpu___bit 4 +#define reg_iop_sw_spu_r_mc_stat___owned_by_spu___lsb 5 +#define reg_iop_sw_spu_r_mc_stat___owned_by_spu___width 1 +#define reg_iop_sw_spu_r_mc_stat___owned_by_spu___bit 5 +#define reg_iop_sw_spu_r_mc_stat_offset 24 + +/* Register rw_bus_clr_mask, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_bus_clr_mask___byte0___lsb 0 +#define reg_iop_sw_spu_rw_bus_clr_mask___byte0___width 8 +#define reg_iop_sw_spu_rw_bus_clr_mask___byte1___lsb 8 +#define reg_iop_sw_spu_rw_bus_clr_mask___byte1___width 8 +#define reg_iop_sw_spu_rw_bus_clr_mask___byte2___lsb 16 +#define reg_iop_sw_spu_rw_bus_clr_mask___byte2___width 8 +#define reg_iop_sw_spu_rw_bus_clr_mask___byte3___lsb 24 +#define reg_iop_sw_spu_rw_bus_clr_mask___byte3___width 8 +#define reg_iop_sw_spu_rw_bus_clr_mask_offset 28 + +/* Register rw_bus_set_mask, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_bus_set_mask___byte0___lsb 0 +#define reg_iop_sw_spu_rw_bus_set_mask___byte0___width 8 +#define reg_iop_sw_spu_rw_bus_set_mask___byte1___lsb 8 +#define reg_iop_sw_spu_rw_bus_set_mask___byte1___width 8 +#define reg_iop_sw_spu_rw_bus_set_mask___byte2___lsb 16 +#define reg_iop_sw_spu_rw_bus_set_mask___byte2___width 8 +#define reg_iop_sw_spu_rw_bus_set_mask___byte3___lsb 24 +#define reg_iop_sw_spu_rw_bus_set_mask___byte3___width 8 +#define reg_iop_sw_spu_rw_bus_set_mask_offset 32 + +/* Register rw_bus_oe_clr_mask, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte0___lsb 0 +#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte0___width 1 +#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte0___bit 0 +#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte1___lsb 1 +#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte1___width 1 +#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte1___bit 1 +#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte2___lsb 2 +#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte2___width 1 +#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte2___bit 2 +#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte3___lsb 3 +#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte3___width 1 +#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte3___bit 3 +#define reg_iop_sw_spu_rw_bus_oe_clr_mask_offset 36 + +/* Register rw_bus_oe_set_mask, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte0___lsb 0 +#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte0___width 1 +#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte0___bit 0 +#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte1___lsb 1 +#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte1___width 1 +#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte1___bit 1 +#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte2___lsb 2 +#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte2___width 1 +#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte2___bit 2 +#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte3___lsb 3 +#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte3___width 1 +#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte3___bit 3 +#define reg_iop_sw_spu_rw_bus_oe_set_mask_offset 40 + +/* Register r_bus_in, scope iop_sw_spu, type r */ +#define reg_iop_sw_spu_r_bus_in_offset 44 + +/* Register rw_gio_clr_mask, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_clr_mask___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_clr_mask___val___width 32 +#define reg_iop_sw_spu_rw_gio_clr_mask_offset 48 + +/* Register rw_gio_set_mask, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_set_mask___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_set_mask___val___width 32 +#define reg_iop_sw_spu_rw_gio_set_mask_offset 52 + +/* Register rw_gio_oe_clr_mask, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_oe_clr_mask___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_oe_clr_mask___val___width 32 +#define reg_iop_sw_spu_rw_gio_oe_clr_mask_offset 56 + +/* Register rw_gio_oe_set_mask, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_oe_set_mask___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_oe_set_mask___val___width 32 +#define reg_iop_sw_spu_rw_gio_oe_set_mask_offset 60 + +/* Register r_gio_in, scope iop_sw_spu, type r */ +#define reg_iop_sw_spu_r_gio_in_offset 64 + +/* Register rw_bus_clr_mask_lo, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_bus_clr_mask_lo___byte0___lsb 0 +#define reg_iop_sw_spu_rw_bus_clr_mask_lo___byte0___width 8 +#define reg_iop_sw_spu_rw_bus_clr_mask_lo___byte1___lsb 8 +#define reg_iop_sw_spu_rw_bus_clr_mask_lo___byte1___width 8 +#define reg_iop_sw_spu_rw_bus_clr_mask_lo_offset 68 + +/* Register rw_bus_clr_mask_hi, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_bus_clr_mask_hi___byte2___lsb 0 +#define reg_iop_sw_spu_rw_bus_clr_mask_hi___byte2___width 8 +#define reg_iop_sw_spu_rw_bus_clr_mask_hi___byte3___lsb 8 +#define reg_iop_sw_spu_rw_bus_clr_mask_hi___byte3___width 8 +#define reg_iop_sw_spu_rw_bus_clr_mask_hi_offset 72 + +/* Register rw_bus_set_mask_lo, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_bus_set_mask_lo___byte0___lsb 0 +#define reg_iop_sw_spu_rw_bus_set_mask_lo___byte0___width 8 +#define reg_iop_sw_spu_rw_bus_set_mask_lo___byte1___lsb 8 +#define reg_iop_sw_spu_rw_bus_set_mask_lo___byte1___width 8 +#define reg_iop_sw_spu_rw_bus_set_mask_lo_offset 76 + +/* Register rw_bus_set_mask_hi, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_bus_set_mask_hi___byte2___lsb 0 +#define reg_iop_sw_spu_rw_bus_set_mask_hi___byte2___width 8 +#define reg_iop_sw_spu_rw_bus_set_mask_hi___byte3___lsb 8 +#define reg_iop_sw_spu_rw_bus_set_mask_hi___byte3___width 8 +#define reg_iop_sw_spu_rw_bus_set_mask_hi_offset 80 + +/* Register rw_gio_clr_mask_lo, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_clr_mask_lo___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_clr_mask_lo___val___width 16 +#define reg_iop_sw_spu_rw_gio_clr_mask_lo_offset 84 + +/* Register rw_gio_clr_mask_hi, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_clr_mask_hi___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_clr_mask_hi___val___width 16 +#define reg_iop_sw_spu_rw_gio_clr_mask_hi_offset 88 + +/* Register rw_gio_set_mask_lo, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_set_mask_lo___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_set_mask_lo___val___width 16 +#define reg_iop_sw_spu_rw_gio_set_mask_lo_offset 92 + +/* Register rw_gio_set_mask_hi, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_set_mask_hi___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_set_mask_hi___val___width 16 +#define reg_iop_sw_spu_rw_gio_set_mask_hi_offset 96 + +/* Register rw_gio_oe_clr_mask_lo, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_oe_clr_mask_lo___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_oe_clr_mask_lo___val___width 16 +#define reg_iop_sw_spu_rw_gio_oe_clr_mask_lo_offset 100 + +/* Register rw_gio_oe_clr_mask_hi, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_oe_clr_mask_hi___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_oe_clr_mask_hi___val___width 16 +#define reg_iop_sw_spu_rw_gio_oe_clr_mask_hi_offset 104 + +/* Register rw_gio_oe_set_mask_lo, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_oe_set_mask_lo___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_oe_set_mask_lo___val___width 16 +#define reg_iop_sw_spu_rw_gio_oe_set_mask_lo_offset 108 + +/* Register rw_gio_oe_set_mask_hi, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_oe_set_mask_hi___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_oe_set_mask_hi___val___width 16 +#define reg_iop_sw_spu_rw_gio_oe_set_mask_hi_offset 112 + +/* Register rw_cpu_intr, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_cpu_intr___intr0___lsb 0 +#define reg_iop_sw_spu_rw_cpu_intr___intr0___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr0___bit 0 +#define reg_iop_sw_spu_rw_cpu_intr___intr1___lsb 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr1___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr1___bit 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr2___lsb 2 +#define reg_iop_sw_spu_rw_cpu_intr___intr2___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr2___bit 2 +#define reg_iop_sw_spu_rw_cpu_intr___intr3___lsb 3 +#define reg_iop_sw_spu_rw_cpu_intr___intr3___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr3___bit 3 +#define reg_iop_sw_spu_rw_cpu_intr___intr4___lsb 4 +#define reg_iop_sw_spu_rw_cpu_intr___intr4___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr4___bit 4 +#define reg_iop_sw_spu_rw_cpu_intr___intr5___lsb 5 +#define reg_iop_sw_spu_rw_cpu_intr___intr5___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr5___bit 5 +#define reg_iop_sw_spu_rw_cpu_intr___intr6___lsb 6 +#define reg_iop_sw_spu_rw_cpu_intr___intr6___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr6___bit 6 +#define reg_iop_sw_spu_rw_cpu_intr___intr7___lsb 7 +#define reg_iop_sw_spu_rw_cpu_intr___intr7___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr7___bit 7 +#define reg_iop_sw_spu_rw_cpu_intr___intr8___lsb 8 +#define reg_iop_sw_spu_rw_cpu_intr___intr8___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr8___bit 8 +#define reg_iop_sw_spu_rw_cpu_intr___intr9___lsb 9 +#define reg_iop_sw_spu_rw_cpu_intr___intr9___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr9___bit 9 +#define reg_iop_sw_spu_rw_cpu_intr___intr10___lsb 10 +#define reg_iop_sw_spu_rw_cpu_intr___intr10___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr10___bit 10 +#define reg_iop_sw_spu_rw_cpu_intr___intr11___lsb 11 +#define reg_iop_sw_spu_rw_cpu_intr___intr11___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr11___bit 11 +#define reg_iop_sw_spu_rw_cpu_intr___intr12___lsb 12 +#define reg_iop_sw_spu_rw_cpu_intr___intr12___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr12___bit 12 +#define reg_iop_sw_spu_rw_cpu_intr___intr13___lsb 13 +#define reg_iop_sw_spu_rw_cpu_intr___intr13___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr13___bit 13 +#define reg_iop_sw_spu_rw_cpu_intr___intr14___lsb 14 +#define reg_iop_sw_spu_rw_cpu_intr___intr14___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr14___bit 14 +#define reg_iop_sw_spu_rw_cpu_intr___intr15___lsb 15 +#define reg_iop_sw_spu_rw_cpu_intr___intr15___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr15___bit 15 +#define reg_iop_sw_spu_rw_cpu_intr_offset 116 + +/* Register r_cpu_intr, scope iop_sw_spu, type r */ +#define reg_iop_sw_spu_r_cpu_intr___intr0___lsb 0 +#define reg_iop_sw_spu_r_cpu_intr___intr0___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr0___bit 0 +#define reg_iop_sw_spu_r_cpu_intr___intr1___lsb 1 +#define reg_iop_sw_spu_r_cpu_intr___intr1___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr1___bit 1 +#define reg_iop_sw_spu_r_cpu_intr___intr2___lsb 2 +#define reg_iop_sw_spu_r_cpu_intr___intr2___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr2___bit 2 +#define reg_iop_sw_spu_r_cpu_intr___intr3___lsb 3 +#define reg_iop_sw_spu_r_cpu_intr___intr3___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr3___bit 3 +#define reg_iop_sw_spu_r_cpu_intr___intr4___lsb 4 +#define reg_iop_sw_spu_r_cpu_intr___intr4___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr4___bit 4 +#define reg_iop_sw_spu_r_cpu_intr___intr5___lsb 5 +#define reg_iop_sw_spu_r_cpu_intr___intr5___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr5___bit 5 +#define reg_iop_sw_spu_r_cpu_intr___intr6___lsb 6 +#define reg_iop_sw_spu_r_cpu_intr___intr6___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr6___bit 6 +#define reg_iop_sw_spu_r_cpu_intr___intr7___lsb 7 +#define reg_iop_sw_spu_r_cpu_intr___intr7___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr7___bit 7 +#define reg_iop_sw_spu_r_cpu_intr___intr8___lsb 8 +#define reg_iop_sw_spu_r_cpu_intr___intr8___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr8___bit 8 +#define reg_iop_sw_spu_r_cpu_intr___intr9___lsb 9 +#define reg_iop_sw_spu_r_cpu_intr___intr9___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr9___bit 9 +#define reg_iop_sw_spu_r_cpu_intr___intr10___lsb 10 +#define reg_iop_sw_spu_r_cpu_intr___intr10___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr10___bit 10 +#define reg_iop_sw_spu_r_cpu_intr___intr11___lsb 11 +#define reg_iop_sw_spu_r_cpu_intr___intr11___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr11___bit 11 +#define reg_iop_sw_spu_r_cpu_intr___intr12___lsb 12 +#define reg_iop_sw_spu_r_cpu_intr___intr12___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr12___bit 12 +#define reg_iop_sw_spu_r_cpu_intr___intr13___lsb 13 +#define reg_iop_sw_spu_r_cpu_intr___intr13___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr13___bit 13 +#define reg_iop_sw_spu_r_cpu_intr___intr14___lsb 14 +#define reg_iop_sw_spu_r_cpu_intr___intr14___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr14___bit 14 +#define reg_iop_sw_spu_r_cpu_intr___intr15___lsb 15 +#define reg_iop_sw_spu_r_cpu_intr___intr15___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr15___bit 15 +#define reg_iop_sw_spu_r_cpu_intr_offset 120 + +/* Register r_hw_intr, scope iop_sw_spu, type r */ +#define reg_iop_sw_spu_r_hw_intr___trigger_grp0___lsb 0 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp0___width 1 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp0___bit 0 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp1___lsb 1 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp1___width 1 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp1___bit 1 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp2___lsb 2 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp2___width 1 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp2___bit 2 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp3___lsb 3 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp3___width 1 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp3___bit 3 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp4___lsb 4 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp4___width 1 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp4___bit 4 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp5___lsb 5 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp5___width 1 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp5___bit 5 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp6___lsb 6 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp6___width 1 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp6___bit 6 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp7___lsb 7 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp7___width 1 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp7___bit 7 +#define reg_iop_sw_spu_r_hw_intr___timer_grp0___lsb 8 +#define reg_iop_sw_spu_r_hw_intr___timer_grp0___width 1 +#define reg_iop_sw_spu_r_hw_intr___timer_grp0___bit 8 +#define reg_iop_sw_spu_r_hw_intr___timer_grp1___lsb 9 +#define reg_iop_sw_spu_r_hw_intr___timer_grp1___width 1 +#define reg_iop_sw_spu_r_hw_intr___timer_grp1___bit 9 +#define reg_iop_sw_spu_r_hw_intr___fifo_out___lsb 10 +#define reg_iop_sw_spu_r_hw_intr___fifo_out___width 1 +#define reg_iop_sw_spu_r_hw_intr___fifo_out___bit 10 +#define reg_iop_sw_spu_r_hw_intr___fifo_out_extra___lsb 11 +#define reg_iop_sw_spu_r_hw_intr___fifo_out_extra___width 1 +#define reg_iop_sw_spu_r_hw_intr___fifo_out_extra___bit 11 +#define reg_iop_sw_spu_r_hw_intr___fifo_in___lsb 12 +#define reg_iop_sw_spu_r_hw_intr___fifo_in___width 1 +#define reg_iop_sw_spu_r_hw_intr___fifo_in___bit 12 +#define reg_iop_sw_spu_r_hw_intr___fifo_in_extra___lsb 13 +#define reg_iop_sw_spu_r_hw_intr___fifo_in_extra___width 1 +#define reg_iop_sw_spu_r_hw_intr___fifo_in_extra___bit 13 +#define reg_iop_sw_spu_r_hw_intr___dmc_out___lsb 14 +#define reg_iop_sw_spu_r_hw_intr___dmc_out___width 1 +#define reg_iop_sw_spu_r_hw_intr___dmc_out___bit 14 +#define reg_iop_sw_spu_r_hw_intr___dmc_in___lsb 15 +#define reg_iop_sw_spu_r_hw_intr___dmc_in___width 1 +#define reg_iop_sw_spu_r_hw_intr___dmc_in___bit 15 +#define reg_iop_sw_spu_r_hw_intr_offset 124 + +/* Register rw_mpu_intr, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_mpu_intr___intr0___lsb 0 +#define reg_iop_sw_spu_rw_mpu_intr___intr0___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr0___bit 0 +#define reg_iop_sw_spu_rw_mpu_intr___intr1___lsb 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr1___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr1___bit 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr2___lsb 2 +#define reg_iop_sw_spu_rw_mpu_intr___intr2___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr2___bit 2 +#define reg_iop_sw_spu_rw_mpu_intr___intr3___lsb 3 +#define reg_iop_sw_spu_rw_mpu_intr___intr3___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr3___bit 3 +#define reg_iop_sw_spu_rw_mpu_intr___intr4___lsb 4 +#define reg_iop_sw_spu_rw_mpu_intr___intr4___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr4___bit 4 +#define reg_iop_sw_spu_rw_mpu_intr___intr5___lsb 5 +#define reg_iop_sw_spu_rw_mpu_intr___intr5___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr5___bit 5 +#define reg_iop_sw_spu_rw_mpu_intr___intr6___lsb 6 +#define reg_iop_sw_spu_rw_mpu_intr___intr6___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr6___bit 6 +#define reg_iop_sw_spu_rw_mpu_intr___intr7___lsb 7 +#define reg_iop_sw_spu_rw_mpu_intr___intr7___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr7___bit 7 +#define reg_iop_sw_spu_rw_mpu_intr___intr8___lsb 8 +#define reg_iop_sw_spu_rw_mpu_intr___intr8___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr8___bit 8 +#define reg_iop_sw_spu_rw_mpu_intr___intr9___lsb 9 +#define reg_iop_sw_spu_rw_mpu_intr___intr9___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr9___bit 9 +#define reg_iop_sw_spu_rw_mpu_intr___intr10___lsb 10 +#define reg_iop_sw_spu_rw_mpu_intr___intr10___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr10___bit 10 +#define reg_iop_sw_spu_rw_mpu_intr___intr11___lsb 11 +#define reg_iop_sw_spu_rw_mpu_intr___intr11___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr11___bit 11 +#define reg_iop_sw_spu_rw_mpu_intr___intr12___lsb 12 +#define reg_iop_sw_spu_rw_mpu_intr___intr12___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr12___bit 12 +#define reg_iop_sw_spu_rw_mpu_intr___intr13___lsb 13 +#define reg_iop_sw_spu_rw_mpu_intr___intr13___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr13___bit 13 +#define reg_iop_sw_spu_rw_mpu_intr___intr14___lsb 14 +#define reg_iop_sw_spu_rw_mpu_intr___intr14___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr14___bit 14 +#define reg_iop_sw_spu_rw_mpu_intr___intr15___lsb 15 +#define reg_iop_sw_spu_rw_mpu_intr___intr15___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr15___bit 15 +#define reg_iop_sw_spu_rw_mpu_intr_offset 128 + +/* Register r_mpu_intr, scope iop_sw_spu, type r */ +#define reg_iop_sw_spu_r_mpu_intr___intr0___lsb 0 +#define reg_iop_sw_spu_r_mpu_intr___intr0___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr0___bit 0 +#define reg_iop_sw_spu_r_mpu_intr___intr1___lsb 1 +#define reg_iop_sw_spu_r_mpu_intr___intr1___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr1___bit 1 +#define reg_iop_sw_spu_r_mpu_intr___intr2___lsb 2 +#define reg_iop_sw_spu_r_mpu_intr___intr2___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr2___bit 2 +#define reg_iop_sw_spu_r_mpu_intr___intr3___lsb 3 +#define reg_iop_sw_spu_r_mpu_intr___intr3___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr3___bit 3 +#define reg_iop_sw_spu_r_mpu_intr___intr4___lsb 4 +#define reg_iop_sw_spu_r_mpu_intr___intr4___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr4___bit 4 +#define reg_iop_sw_spu_r_mpu_intr___intr5___lsb 5 +#define reg_iop_sw_spu_r_mpu_intr___intr5___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr5___bit 5 +#define reg_iop_sw_spu_r_mpu_intr___intr6___lsb 6 +#define reg_iop_sw_spu_r_mpu_intr___intr6___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr6___bit 6 +#define reg_iop_sw_spu_r_mpu_intr___intr7___lsb 7 +#define reg_iop_sw_spu_r_mpu_intr___intr7___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr7___bit 7 +#define reg_iop_sw_spu_r_mpu_intr___intr8___lsb 8 +#define reg_iop_sw_spu_r_mpu_intr___intr8___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr8___bit 8 +#define reg_iop_sw_spu_r_mpu_intr___intr9___lsb 9 +#define reg_iop_sw_spu_r_mpu_intr___intr9___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr9___bit 9 +#define reg_iop_sw_spu_r_mpu_intr___intr10___lsb 10 +#define reg_iop_sw_spu_r_mpu_intr___intr10___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr10___bit 10 +#define reg_iop_sw_spu_r_mpu_intr___intr11___lsb 11 +#define reg_iop_sw_spu_r_mpu_intr___intr11___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr11___bit 11 +#define reg_iop_sw_spu_r_mpu_intr___intr12___lsb 12 +#define reg_iop_sw_spu_r_mpu_intr___intr12___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr12___bit 12 +#define reg_iop_sw_spu_r_mpu_intr___intr13___lsb 13 +#define reg_iop_sw_spu_r_mpu_intr___intr13___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr13___bit 13 +#define reg_iop_sw_spu_r_mpu_intr___intr14___lsb 14 +#define reg_iop_sw_spu_r_mpu_intr___intr14___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr14___bit 14 +#define reg_iop_sw_spu_r_mpu_intr___intr15___lsb 15 +#define reg_iop_sw_spu_r_mpu_intr___intr15___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr15___bit 15 +#define reg_iop_sw_spu_r_mpu_intr_offset 132 + + +/* Constants */ +#define regk_iop_sw_spu_copy 0x00000000 +#define regk_iop_sw_spu_no 0x00000000 +#define regk_iop_sw_spu_nop 0x00000000 +#define regk_iop_sw_spu_rd 0x00000002 +#define regk_iop_sw_spu_reg_copy 0x00000001 +#define regk_iop_sw_spu_rw_bus_clr_mask_default 0x00000000 +#define regk_iop_sw_spu_rw_bus_oe_clr_mask_default 0x00000000 +#define regk_iop_sw_spu_rw_bus_oe_set_mask_default 0x00000000 +#define regk_iop_sw_spu_rw_bus_set_mask_default 0x00000000 +#define regk_iop_sw_spu_rw_gio_clr_mask_default 0x00000000 +#define regk_iop_sw_spu_rw_gio_oe_clr_mask_default 0x00000000 +#define regk_iop_sw_spu_rw_gio_oe_set_mask_default 0x00000000 +#define regk_iop_sw_spu_rw_gio_set_mask_default 0x00000000 +#define regk_iop_sw_spu_set 0x00000001 +#define regk_iop_sw_spu_wr 0x00000003 +#define regk_iop_sw_spu_yes 0x00000001 +#endif /* __iop_sw_spu_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_version_defs_asm.h b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_version_defs_asm.h new file mode 100644 index 000000000000..4ad671202af0 --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_version_defs_asm.h @@ -0,0 +1,61 @@ +#ifndef __iop_version_defs_asm_h +#define __iop_version_defs_asm_h + +/* + * This file is autogenerated from + * file: iop_version.r + * + * by ../../../tools/rdesc/bin/rdes2c -asm -outfile iop_version_defs_asm.h iop_version.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register r_version, scope iop_version, type r */ +#define reg_iop_version_r_version___nr___lsb 0 +#define reg_iop_version_r_version___nr___width 8 +#define reg_iop_version_r_version_offset 0 + + +/* Constants */ +#define regk_iop_version_v2_0 0x00000002 +#endif /* __iop_version_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_reg_space.h b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_reg_space.h new file mode 100644 index 000000000000..af3196c60a46 --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_reg_space.h @@ -0,0 +1,31 @@ +/* Autogenerated Changes here will be lost! + * generated by ./gen_sw.pl Wed Feb 14 09:27:48 2007 iop_sw.cfg + */ +#define regi_iop_version (regi_iop + 0) +#define regi_iop_fifo_in_extra (regi_iop + 64) +#define regi_iop_fifo_out_extra (regi_iop + 128) +#define regi_iop_trigger_grp0 (regi_iop + 192) +#define regi_iop_trigger_grp1 (regi_iop + 256) +#define regi_iop_trigger_grp2 (regi_iop + 320) +#define regi_iop_trigger_grp3 (regi_iop + 384) +#define regi_iop_trigger_grp4 (regi_iop + 448) +#define regi_iop_trigger_grp5 (regi_iop + 512) +#define regi_iop_trigger_grp6 (regi_iop + 576) +#define regi_iop_trigger_grp7 (regi_iop + 640) +#define regi_iop_crc_par (regi_iop + 768) +#define regi_iop_dmc_in (regi_iop + 896) +#define regi_iop_dmc_out (regi_iop + 1024) +#define regi_iop_fifo_in (regi_iop + 1152) +#define regi_iop_fifo_out (regi_iop + 1280) +#define regi_iop_scrc_in (regi_iop + 1408) +#define regi_iop_scrc_out (regi_iop + 1536) +#define regi_iop_timer_grp0 (regi_iop + 1664) +#define regi_iop_timer_grp1 (regi_iop + 1792) +#define regi_iop_sap_in (regi_iop + 2048) +#define regi_iop_sap_out (regi_iop + 2304) +#define regi_iop_spu (regi_iop + 2560) +#define regi_iop_sw_cfg (regi_iop + 2816) +#define regi_iop_sw_cpu (regi_iop + 3072) +#define regi_iop_sw_mpu (regi_iop + 3328) +#define regi_iop_sw_spu (regi_iop + 3584) +#define regi_iop_mpu (regi_iop + 4096) diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sap_in_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sap_in_defs.h new file mode 100644 index 000000000000..51dde016c03a --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sap_in_defs.h @@ -0,0 +1,141 @@ +#ifndef __iop_sap_in_defs_h +#define __iop_sap_in_defs_h + +/* + * This file is autogenerated from + * file: iop_sap_in.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile iop_sap_in_defs.h iop_sap_in.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope iop_sap_in */ + +#define STRIDE_iop_sap_in_rw_bus_byte 4 +/* Register rw_bus_byte, scope iop_sap_in, type rw */ +typedef struct { + unsigned int sync_sel : 2; + unsigned int sync_ext_src : 3; + unsigned int sync_edge : 2; + unsigned int delay : 2; + unsigned int dummy1 : 23; +} reg_iop_sap_in_rw_bus_byte; +#define REG_RD_ADDR_iop_sap_in_rw_bus_byte 0 +#define REG_WR_ADDR_iop_sap_in_rw_bus_byte 0 + +#define STRIDE_iop_sap_in_rw_gio 4 +/* Register rw_gio, scope iop_sap_in, type rw */ +typedef struct { + unsigned int sync_sel : 2; + unsigned int sync_ext_src : 3; + unsigned int sync_edge : 2; + unsigned int delay : 2; + unsigned int logic : 2; + unsigned int dummy1 : 21; +} reg_iop_sap_in_rw_gio; +#define REG_RD_ADDR_iop_sap_in_rw_gio 16 +#define REG_WR_ADDR_iop_sap_in_rw_gio 16 + + +/* Constants */ +enum { + regk_iop_sap_in_and = 0x00000002, + regk_iop_sap_in_ext_clk200 = 0x00000003, + regk_iop_sap_in_gio0 = 0x00000000, + regk_iop_sap_in_gio12 = 0x00000003, + regk_iop_sap_in_gio16 = 0x00000004, + regk_iop_sap_in_gio20 = 0x00000005, + regk_iop_sap_in_gio24 = 0x00000006, + regk_iop_sap_in_gio28 = 0x00000007, + regk_iop_sap_in_gio4 = 0x00000001, + regk_iop_sap_in_gio8 = 0x00000002, + regk_iop_sap_in_inv = 0x00000001, + regk_iop_sap_in_neg = 0x00000002, + regk_iop_sap_in_no = 0x00000000, + regk_iop_sap_in_no_del_ext_clk200 = 0x00000002, + regk_iop_sap_in_none = 0x00000000, + regk_iop_sap_in_one = 0x00000001, + regk_iop_sap_in_or = 0x00000003, + regk_iop_sap_in_pos = 0x00000001, + regk_iop_sap_in_pos_neg = 0x00000003, + regk_iop_sap_in_rw_bus_byte_default = 0x00000000, + regk_iop_sap_in_rw_bus_byte_size = 0x00000004, + regk_iop_sap_in_rw_gio_default = 0x00000000, + regk_iop_sap_in_rw_gio_size = 0x00000020, + regk_iop_sap_in_timer_grp0_tmr3 = 0x00000000, + regk_iop_sap_in_timer_grp1_tmr3 = 0x00000001, + regk_iop_sap_in_tmr_clk200 = 0x00000001, + regk_iop_sap_in_two = 0x00000002, + regk_iop_sap_in_two_clk200 = 0x00000000 +}; +#endif /* __iop_sap_in_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sap_out_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sap_out_defs.h new file mode 100644 index 000000000000..5af88baa2ac1 --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sap_out_defs.h @@ -0,0 +1,231 @@ +#ifndef __iop_sap_out_defs_h +#define __iop_sap_out_defs_h + +/* + * This file is autogenerated from + * file: iop_sap_out.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile iop_sap_out_defs.h iop_sap_out.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope iop_sap_out */ + +/* Register rw_gen_gated, scope iop_sap_out, type rw */ +typedef struct { + unsigned int clk0_src : 2; + unsigned int clk0_gate_src : 2; + unsigned int clk0_force_src : 3; + unsigned int clk1_src : 2; + unsigned int clk1_gate_src : 2; + unsigned int clk1_force_src : 3; + unsigned int dummy1 : 18; +} reg_iop_sap_out_rw_gen_gated; +#define REG_RD_ADDR_iop_sap_out_rw_gen_gated 0 +#define REG_WR_ADDR_iop_sap_out_rw_gen_gated 0 + +/* Register rw_bus, scope iop_sap_out, type rw */ +typedef struct { + unsigned int byte0_clk_sel : 2; + unsigned int byte0_clk_ext : 2; + unsigned int byte0_gated_clk : 1; + unsigned int byte0_clk_inv : 1; + unsigned int byte0_delay : 1; + unsigned int byte1_clk_sel : 2; + unsigned int byte1_clk_ext : 2; + unsigned int byte1_gated_clk : 1; + unsigned int byte1_clk_inv : 1; + unsigned int byte1_delay : 1; + unsigned int byte2_clk_sel : 2; + unsigned int byte2_clk_ext : 2; + unsigned int byte2_gated_clk : 1; + unsigned int byte2_clk_inv : 1; + unsigned int byte2_delay : 1; + unsigned int byte3_clk_sel : 2; + unsigned int byte3_clk_ext : 2; + unsigned int byte3_gated_clk : 1; + unsigned int byte3_clk_inv : 1; + unsigned int byte3_delay : 1; + unsigned int dummy1 : 4; +} reg_iop_sap_out_rw_bus; +#define REG_RD_ADDR_iop_sap_out_rw_bus 4 +#define REG_WR_ADDR_iop_sap_out_rw_bus 4 + +/* Register rw_bus_lo_oe, scope iop_sap_out, type rw */ +typedef struct { + unsigned int byte0_clk_sel : 2; + unsigned int byte0_clk_ext : 2; + unsigned int byte0_gated_clk : 1; + unsigned int byte0_clk_inv : 1; + unsigned int byte0_delay : 1; + unsigned int byte0_logic : 2; + unsigned int byte0_logic_src : 2; + unsigned int byte1_clk_sel : 2; + unsigned int byte1_clk_ext : 2; + unsigned int byte1_gated_clk : 1; + unsigned int byte1_clk_inv : 1; + unsigned int byte1_delay : 1; + unsigned int byte1_logic : 2; + unsigned int byte1_logic_src : 2; + unsigned int dummy1 : 10; +} reg_iop_sap_out_rw_bus_lo_oe; +#define REG_RD_ADDR_iop_sap_out_rw_bus_lo_oe 8 +#define REG_WR_ADDR_iop_sap_out_rw_bus_lo_oe 8 + +/* Register rw_bus_hi_oe, scope iop_sap_out, type rw */ +typedef struct { + unsigned int byte2_clk_sel : 2; + unsigned int byte2_clk_ext : 2; + unsigned int byte2_gated_clk : 1; + unsigned int byte2_clk_inv : 1; + unsigned int byte2_delay : 1; + unsigned int byte2_logic : 2; + unsigned int byte2_logic_src : 2; + unsigned int byte3_clk_sel : 2; + unsigned int byte3_clk_ext : 2; + unsigned int byte3_gated_clk : 1; + unsigned int byte3_clk_inv : 1; + unsigned int byte3_delay : 1; + unsigned int byte3_logic : 2; + unsigned int byte3_logic_src : 2; + unsigned int dummy1 : 10; +} reg_iop_sap_out_rw_bus_hi_oe; +#define REG_RD_ADDR_iop_sap_out_rw_bus_hi_oe 12 +#define REG_WR_ADDR_iop_sap_out_rw_bus_hi_oe 12 + +#define STRIDE_iop_sap_out_rw_gio 4 +/* Register rw_gio, scope iop_sap_out, type rw */ +typedef struct { + unsigned int out_clk_sel : 3; + unsigned int out_clk_ext : 2; + unsigned int out_gated_clk : 1; + unsigned int out_clk_inv : 1; + unsigned int out_delay : 1; + unsigned int out_logic : 2; + unsigned int out_logic_src : 2; + unsigned int oe_clk_sel : 3; + unsigned int oe_clk_ext : 2; + unsigned int oe_gated_clk : 1; + unsigned int oe_clk_inv : 1; + unsigned int oe_delay : 1; + unsigned int oe_logic : 2; + unsigned int oe_logic_src : 2; + unsigned int dummy1 : 8; +} reg_iop_sap_out_rw_gio; +#define REG_RD_ADDR_iop_sap_out_rw_gio 16 +#define REG_WR_ADDR_iop_sap_out_rw_gio 16 + + +/* Constants */ +enum { + regk_iop_sap_out_always = 0x00000001, + regk_iop_sap_out_and = 0x00000002, + regk_iop_sap_out_clk0 = 0x00000000, + regk_iop_sap_out_clk1 = 0x00000001, + regk_iop_sap_out_clk12 = 0x00000004, + regk_iop_sap_out_clk200 = 0x00000000, + regk_iop_sap_out_ext = 0x00000002, + regk_iop_sap_out_gated = 0x00000003, + regk_iop_sap_out_gio0 = 0x00000000, + regk_iop_sap_out_gio1 = 0x00000000, + regk_iop_sap_out_gio16 = 0x00000002, + regk_iop_sap_out_gio17 = 0x00000002, + regk_iop_sap_out_gio24 = 0x00000003, + regk_iop_sap_out_gio25 = 0x00000003, + regk_iop_sap_out_gio8 = 0x00000001, + regk_iop_sap_out_gio9 = 0x00000001, + regk_iop_sap_out_gio_out10 = 0x00000005, + regk_iop_sap_out_gio_out18 = 0x00000006, + regk_iop_sap_out_gio_out2 = 0x00000004, + regk_iop_sap_out_gio_out26 = 0x00000007, + regk_iop_sap_out_inv = 0x00000001, + regk_iop_sap_out_nand = 0x00000003, + regk_iop_sap_out_no = 0x00000000, + regk_iop_sap_out_none = 0x00000000, + regk_iop_sap_out_one = 0x00000001, + regk_iop_sap_out_rw_bus_default = 0x00000000, + regk_iop_sap_out_rw_bus_hi_oe_default = 0x00000000, + regk_iop_sap_out_rw_bus_lo_oe_default = 0x00000000, + regk_iop_sap_out_rw_gen_gated_default = 0x00000000, + regk_iop_sap_out_rw_gio_default = 0x00000000, + regk_iop_sap_out_rw_gio_size = 0x00000020, + regk_iop_sap_out_spu_gio6 = 0x00000002, + regk_iop_sap_out_spu_gio7 = 0x00000003, + regk_iop_sap_out_timer_grp0_tmr2 = 0x00000000, + regk_iop_sap_out_timer_grp0_tmr3 = 0x00000001, + regk_iop_sap_out_timer_grp1_tmr2 = 0x00000002, + regk_iop_sap_out_timer_grp1_tmr3 = 0x00000003, + regk_iop_sap_out_tmr200 = 0x00000001, + regk_iop_sap_out_yes = 0x00000001 +}; +#endif /* __iop_sap_out_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sw_cfg_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sw_cfg_defs.h new file mode 100644 index 000000000000..98ac95275a1c --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sw_cfg_defs.h @@ -0,0 +1,725 @@ +#ifndef __iop_sw_cfg_defs_h +#define __iop_sw_cfg_defs_h + +/* + * This file is autogenerated from + * file: iop_sw_cfg.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile iop_sw_cfg_defs.h iop_sw_cfg.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope iop_sw_cfg */ + +/* Register rw_crc_par_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_crc_par_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_crc_par_owner 0 +#define REG_WR_ADDR_iop_sw_cfg_rw_crc_par_owner 0 + +/* Register rw_dmc_in_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_dmc_in_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_dmc_in_owner 4 +#define REG_WR_ADDR_iop_sw_cfg_rw_dmc_in_owner 4 + +/* Register rw_dmc_out_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_dmc_out_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_dmc_out_owner 8 +#define REG_WR_ADDR_iop_sw_cfg_rw_dmc_out_owner 8 + +/* Register rw_fifo_in_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_fifo_in_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_fifo_in_owner 12 +#define REG_WR_ADDR_iop_sw_cfg_rw_fifo_in_owner 12 + +/* Register rw_fifo_in_extra_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_fifo_in_extra_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_fifo_in_extra_owner 16 +#define REG_WR_ADDR_iop_sw_cfg_rw_fifo_in_extra_owner 16 + +/* Register rw_fifo_out_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_fifo_out_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_fifo_out_owner 20 +#define REG_WR_ADDR_iop_sw_cfg_rw_fifo_out_owner 20 + +/* Register rw_fifo_out_extra_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_fifo_out_extra_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_fifo_out_extra_owner 24 +#define REG_WR_ADDR_iop_sw_cfg_rw_fifo_out_extra_owner 24 + +/* Register rw_sap_in_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_sap_in_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_sap_in_owner 28 +#define REG_WR_ADDR_iop_sw_cfg_rw_sap_in_owner 28 + +/* Register rw_sap_out_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_sap_out_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_sap_out_owner 32 +#define REG_WR_ADDR_iop_sw_cfg_rw_sap_out_owner 32 + +/* Register rw_scrc_in_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_scrc_in_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_scrc_in_owner 36 +#define REG_WR_ADDR_iop_sw_cfg_rw_scrc_in_owner 36 + +/* Register rw_scrc_out_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_scrc_out_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_scrc_out_owner 40 +#define REG_WR_ADDR_iop_sw_cfg_rw_scrc_out_owner 40 + +/* Register rw_spu_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 1; + unsigned int dummy1 : 31; +} reg_iop_sw_cfg_rw_spu_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_spu_owner 44 +#define REG_WR_ADDR_iop_sw_cfg_rw_spu_owner 44 + +/* Register rw_timer_grp0_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_timer_grp0_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_timer_grp0_owner 48 +#define REG_WR_ADDR_iop_sw_cfg_rw_timer_grp0_owner 48 + +/* Register rw_timer_grp1_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_timer_grp1_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_timer_grp1_owner 52 +#define REG_WR_ADDR_iop_sw_cfg_rw_timer_grp1_owner 52 + +/* Register rw_trigger_grp0_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_trigger_grp0_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp0_owner 56 +#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp0_owner 56 + +/* Register rw_trigger_grp1_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_trigger_grp1_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp1_owner 60 +#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp1_owner 60 + +/* Register rw_trigger_grp2_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_trigger_grp2_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp2_owner 64 +#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp2_owner 64 + +/* Register rw_trigger_grp3_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_trigger_grp3_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp3_owner 68 +#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp3_owner 68 + +/* Register rw_trigger_grp4_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_trigger_grp4_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp4_owner 72 +#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp4_owner 72 + +/* Register rw_trigger_grp5_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_trigger_grp5_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp5_owner 76 +#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp5_owner 76 + +/* Register rw_trigger_grp6_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_trigger_grp6_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp6_owner 80 +#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp6_owner 80 + +/* Register rw_trigger_grp7_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_trigger_grp7_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp7_owner 84 +#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp7_owner 84 + +/* Register rw_bus_mask, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int byte2 : 8; + unsigned int byte3 : 8; +} reg_iop_sw_cfg_rw_bus_mask; +#define REG_RD_ADDR_iop_sw_cfg_rw_bus_mask 88 +#define REG_WR_ADDR_iop_sw_cfg_rw_bus_mask 88 + +/* Register rw_bus_oe_mask, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int byte0 : 1; + unsigned int byte1 : 1; + unsigned int byte2 : 1; + unsigned int byte3 : 1; + unsigned int dummy1 : 28; +} reg_iop_sw_cfg_rw_bus_oe_mask; +#define REG_RD_ADDR_iop_sw_cfg_rw_bus_oe_mask 92 +#define REG_WR_ADDR_iop_sw_cfg_rw_bus_oe_mask 92 + +/* Register rw_gio_mask, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_cfg_rw_gio_mask; +#define REG_RD_ADDR_iop_sw_cfg_rw_gio_mask 96 +#define REG_WR_ADDR_iop_sw_cfg_rw_gio_mask 96 + +/* Register rw_gio_oe_mask, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_cfg_rw_gio_oe_mask; +#define REG_RD_ADDR_iop_sw_cfg_rw_gio_oe_mask 100 +#define REG_WR_ADDR_iop_sw_cfg_rw_gio_oe_mask 100 + +/* Register rw_pinmapping, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int bus_byte0 : 2; + unsigned int bus_byte1 : 2; + unsigned int bus_byte2 : 2; + unsigned int bus_byte3 : 2; + unsigned int gio3_0 : 2; + unsigned int gio7_4 : 2; + unsigned int gio11_8 : 2; + unsigned int gio15_12 : 2; + unsigned int gio19_16 : 2; + unsigned int gio23_20 : 2; + unsigned int gio27_24 : 2; + unsigned int gio31_28 : 2; + unsigned int dummy1 : 8; +} reg_iop_sw_cfg_rw_pinmapping; +#define REG_RD_ADDR_iop_sw_cfg_rw_pinmapping 104 +#define REG_WR_ADDR_iop_sw_cfg_rw_pinmapping 104 + +/* Register rw_bus_out_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int bus_lo : 2; + unsigned int bus_hi : 2; + unsigned int bus_lo_oe : 2; + unsigned int bus_hi_oe : 2; + unsigned int dummy1 : 24; +} reg_iop_sw_cfg_rw_bus_out_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_bus_out_cfg 108 +#define REG_WR_ADDR_iop_sw_cfg_rw_bus_out_cfg 108 + +/* Register rw_gio_out_grp0_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int gio0 : 3; + unsigned int gio0_oe : 1; + unsigned int gio1 : 3; + unsigned int gio1_oe : 1; + unsigned int gio2 : 3; + unsigned int gio2_oe : 1; + unsigned int gio3 : 3; + unsigned int gio3_oe : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_cfg_rw_gio_out_grp0_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp0_cfg 112 +#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp0_cfg 112 + +/* Register rw_gio_out_grp1_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int gio4 : 3; + unsigned int gio4_oe : 1; + unsigned int gio5 : 3; + unsigned int gio5_oe : 1; + unsigned int gio6 : 3; + unsigned int gio6_oe : 1; + unsigned int gio7 : 3; + unsigned int gio7_oe : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_cfg_rw_gio_out_grp1_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp1_cfg 116 +#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp1_cfg 116 + +/* Register rw_gio_out_grp2_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int gio8 : 3; + unsigned int gio8_oe : 1; + unsigned int gio9 : 3; + unsigned int gio9_oe : 1; + unsigned int gio10 : 3; + unsigned int gio10_oe : 1; + unsigned int gio11 : 3; + unsigned int gio11_oe : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_cfg_rw_gio_out_grp2_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp2_cfg 120 +#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp2_cfg 120 + +/* Register rw_gio_out_grp3_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int gio12 : 3; + unsigned int gio12_oe : 1; + unsigned int gio13 : 3; + unsigned int gio13_oe : 1; + unsigned int gio14 : 3; + unsigned int gio14_oe : 1; + unsigned int gio15 : 3; + unsigned int gio15_oe : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_cfg_rw_gio_out_grp3_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp3_cfg 124 +#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp3_cfg 124 + +/* Register rw_gio_out_grp4_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int gio16 : 3; + unsigned int gio16_oe : 1; + unsigned int gio17 : 3; + unsigned int gio17_oe : 1; + unsigned int gio18 : 3; + unsigned int gio18_oe : 1; + unsigned int gio19 : 3; + unsigned int gio19_oe : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_cfg_rw_gio_out_grp4_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp4_cfg 128 +#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp4_cfg 128 + +/* Register rw_gio_out_grp5_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int gio20 : 3; + unsigned int gio20_oe : 1; + unsigned int gio21 : 3; + unsigned int gio21_oe : 1; + unsigned int gio22 : 3; + unsigned int gio22_oe : 1; + unsigned int gio23 : 3; + unsigned int gio23_oe : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_cfg_rw_gio_out_grp5_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp5_cfg 132 +#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp5_cfg 132 + +/* Register rw_gio_out_grp6_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int gio24 : 3; + unsigned int gio24_oe : 1; + unsigned int gio25 : 3; + unsigned int gio25_oe : 1; + unsigned int gio26 : 3; + unsigned int gio26_oe : 1; + unsigned int gio27 : 3; + unsigned int gio27_oe : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_cfg_rw_gio_out_grp6_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp6_cfg 136 +#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp6_cfg 136 + +/* Register rw_gio_out_grp7_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int gio28 : 3; + unsigned int gio28_oe : 1; + unsigned int gio29 : 3; + unsigned int gio29_oe : 1; + unsigned int gio30 : 3; + unsigned int gio30_oe : 1; + unsigned int gio31 : 3; + unsigned int gio31_oe : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_cfg_rw_gio_out_grp7_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp7_cfg 140 +#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp7_cfg 140 + +/* Register rw_spu_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int bus0_in : 1; + unsigned int bus1_in : 1; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_spu_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_spu_cfg 144 +#define REG_WR_ADDR_iop_sw_cfg_rw_spu_cfg 144 + +/* Register rw_timer_grp0_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int ext_clk : 3; + unsigned int tmr0_en : 2; + unsigned int tmr1_en : 2; + unsigned int tmr2_en : 2; + unsigned int tmr3_en : 2; + unsigned int tmr0_dis : 2; + unsigned int tmr1_dis : 2; + unsigned int tmr2_dis : 2; + unsigned int tmr3_dis : 2; + unsigned int dummy1 : 13; +} reg_iop_sw_cfg_rw_timer_grp0_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_timer_grp0_cfg 148 +#define REG_WR_ADDR_iop_sw_cfg_rw_timer_grp0_cfg 148 + +/* Register rw_timer_grp1_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int ext_clk : 3; + unsigned int tmr0_en : 2; + unsigned int tmr1_en : 2; + unsigned int tmr2_en : 2; + unsigned int tmr3_en : 2; + unsigned int tmr0_dis : 2; + unsigned int tmr1_dis : 2; + unsigned int tmr2_dis : 2; + unsigned int tmr3_dis : 2; + unsigned int dummy1 : 13; +} reg_iop_sw_cfg_rw_timer_grp1_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_timer_grp1_cfg 152 +#define REG_WR_ADDR_iop_sw_cfg_rw_timer_grp1_cfg 152 + +/* Register rw_trigger_grps_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int grp0_dis : 1; + unsigned int grp0_en : 1; + unsigned int grp1_dis : 1; + unsigned int grp1_en : 1; + unsigned int grp2_dis : 1; + unsigned int grp2_en : 1; + unsigned int grp3_dis : 1; + unsigned int grp3_en : 1; + unsigned int grp4_dis : 1; + unsigned int grp4_en : 1; + unsigned int grp5_dis : 1; + unsigned int grp5_en : 1; + unsigned int grp6_dis : 1; + unsigned int grp6_en : 1; + unsigned int grp7_dis : 1; + unsigned int grp7_en : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_cfg_rw_trigger_grps_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grps_cfg 156 +#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grps_cfg 156 + +/* Register rw_pdp_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int out_strb : 4; + unsigned int in_src : 2; + unsigned int in_size : 3; + unsigned int in_last : 2; + unsigned int in_strb : 4; + unsigned int dummy1 : 17; +} reg_iop_sw_cfg_rw_pdp_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_pdp_cfg 160 +#define REG_WR_ADDR_iop_sw_cfg_rw_pdp_cfg 160 + +/* Register rw_sdp_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int sdp_out_strb : 3; + unsigned int sdp_in_data : 3; + unsigned int sdp_in_last : 2; + unsigned int sdp_in_strb : 3; + unsigned int dummy1 : 21; +} reg_iop_sw_cfg_rw_sdp_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_sdp_cfg 164 +#define REG_WR_ADDR_iop_sw_cfg_rw_sdp_cfg 164 + + +/* Constants */ +enum { + regk_iop_sw_cfg_a = 0x00000001, + regk_iop_sw_cfg_b = 0x00000002, + regk_iop_sw_cfg_bus = 0x00000000, + regk_iop_sw_cfg_bus_rot16 = 0x00000002, + regk_iop_sw_cfg_bus_rot24 = 0x00000003, + regk_iop_sw_cfg_bus_rot8 = 0x00000001, + regk_iop_sw_cfg_clk12 = 0x00000000, + regk_iop_sw_cfg_cpu = 0x00000000, + regk_iop_sw_cfg_gated_clk0 = 0x0000000e, + regk_iop_sw_cfg_gated_clk1 = 0x0000000f, + regk_iop_sw_cfg_gio0 = 0x00000004, + regk_iop_sw_cfg_gio1 = 0x00000001, + regk_iop_sw_cfg_gio2 = 0x00000005, + regk_iop_sw_cfg_gio3 = 0x00000002, + regk_iop_sw_cfg_gio4 = 0x00000006, + regk_iop_sw_cfg_gio5 = 0x00000003, + regk_iop_sw_cfg_gio6 = 0x00000007, + regk_iop_sw_cfg_gio7 = 0x00000004, + regk_iop_sw_cfg_gio_in18 = 0x00000002, + regk_iop_sw_cfg_gio_in19 = 0x00000003, + regk_iop_sw_cfg_gio_in20 = 0x00000004, + regk_iop_sw_cfg_gio_in21 = 0x00000005, + regk_iop_sw_cfg_gio_in26 = 0x00000006, + regk_iop_sw_cfg_gio_in27 = 0x00000007, + regk_iop_sw_cfg_gio_in4 = 0x00000000, + regk_iop_sw_cfg_gio_in5 = 0x00000001, + regk_iop_sw_cfg_last_timer_grp0_tmr2 = 0x00000001, + regk_iop_sw_cfg_last_timer_grp1_tmr2 = 0x00000002, + regk_iop_sw_cfg_last_timer_grp1_tmr3 = 0x00000003, + regk_iop_sw_cfg_mpu = 0x00000001, + regk_iop_sw_cfg_none = 0x00000000, + regk_iop_sw_cfg_pdp_out = 0x00000001, + regk_iop_sw_cfg_pdp_out_hi = 0x00000001, + regk_iop_sw_cfg_pdp_out_lo = 0x00000000, + regk_iop_sw_cfg_rw_bus_mask_default = 0x00000000, + regk_iop_sw_cfg_rw_bus_oe_mask_default = 0x00000000, + regk_iop_sw_cfg_rw_bus_out_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_crc_par_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_dmc_in_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_dmc_out_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_fifo_in_extra_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_fifo_in_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_fifo_out_extra_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_fifo_out_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_gio_mask_default = 0x00000000, + regk_iop_sw_cfg_rw_gio_oe_mask_default = 0x00000000, + regk_iop_sw_cfg_rw_gio_out_grp0_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_gio_out_grp1_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_gio_out_grp2_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_gio_out_grp3_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_gio_out_grp4_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_gio_out_grp5_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_gio_out_grp6_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_gio_out_grp7_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_pdp_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_pinmapping_default = 0x00555555, + regk_iop_sw_cfg_rw_sap_in_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_sap_out_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_scrc_in_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_scrc_out_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_sdp_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_spu_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_spu_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_timer_grp0_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_timer_grp0_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_timer_grp1_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_timer_grp1_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_trigger_grp0_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_trigger_grp1_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_trigger_grp2_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_trigger_grp3_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_trigger_grp4_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_trigger_grp5_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_trigger_grp6_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_trigger_grp7_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_trigger_grps_cfg_default = 0x00000000, + regk_iop_sw_cfg_sdp_out = 0x00000004, + regk_iop_sw_cfg_size16 = 0x00000002, + regk_iop_sw_cfg_size24 = 0x00000003, + regk_iop_sw_cfg_size32 = 0x00000004, + regk_iop_sw_cfg_size8 = 0x00000001, + regk_iop_sw_cfg_spu = 0x00000002, + regk_iop_sw_cfg_spu_bus_out0_hi = 0x00000002, + regk_iop_sw_cfg_spu_bus_out0_lo = 0x00000002, + regk_iop_sw_cfg_spu_bus_out1_hi = 0x00000003, + regk_iop_sw_cfg_spu_bus_out1_lo = 0x00000003, + regk_iop_sw_cfg_spu_g0 = 0x00000007, + regk_iop_sw_cfg_spu_g1 = 0x00000007, + regk_iop_sw_cfg_spu_g2 = 0x00000007, + regk_iop_sw_cfg_spu_g3 = 0x00000007, + regk_iop_sw_cfg_spu_g4 = 0x00000007, + regk_iop_sw_cfg_spu_g5 = 0x00000007, + regk_iop_sw_cfg_spu_g6 = 0x00000007, + regk_iop_sw_cfg_spu_g7 = 0x00000007, + regk_iop_sw_cfg_spu_gio0 = 0x00000000, + regk_iop_sw_cfg_spu_gio1 = 0x00000001, + regk_iop_sw_cfg_spu_gio5 = 0x00000005, + regk_iop_sw_cfg_spu_gio6 = 0x00000006, + regk_iop_sw_cfg_spu_gio7 = 0x00000007, + regk_iop_sw_cfg_spu_gio_out0 = 0x00000008, + regk_iop_sw_cfg_spu_gio_out1 = 0x00000009, + regk_iop_sw_cfg_spu_gio_out2 = 0x0000000a, + regk_iop_sw_cfg_spu_gio_out3 = 0x0000000b, + regk_iop_sw_cfg_spu_gio_out4 = 0x0000000c, + regk_iop_sw_cfg_spu_gio_out5 = 0x0000000d, + regk_iop_sw_cfg_spu_gio_out6 = 0x0000000e, + regk_iop_sw_cfg_spu_gio_out7 = 0x0000000f, + regk_iop_sw_cfg_spu_gioout0 = 0x00000000, + regk_iop_sw_cfg_spu_gioout1 = 0x00000000, + regk_iop_sw_cfg_spu_gioout10 = 0x00000007, + regk_iop_sw_cfg_spu_gioout11 = 0x00000007, + regk_iop_sw_cfg_spu_gioout12 = 0x00000007, + regk_iop_sw_cfg_spu_gioout13 = 0x00000007, + regk_iop_sw_cfg_spu_gioout14 = 0x00000007, + regk_iop_sw_cfg_spu_gioout15 = 0x00000007, + regk_iop_sw_cfg_spu_gioout16 = 0x00000007, + regk_iop_sw_cfg_spu_gioout17 = 0x00000007, + regk_iop_sw_cfg_spu_gioout18 = 0x00000007, + regk_iop_sw_cfg_spu_gioout19 = 0x00000007, + regk_iop_sw_cfg_spu_gioout2 = 0x00000001, + regk_iop_sw_cfg_spu_gioout20 = 0x00000007, + regk_iop_sw_cfg_spu_gioout21 = 0x00000007, + regk_iop_sw_cfg_spu_gioout22 = 0x00000007, + regk_iop_sw_cfg_spu_gioout23 = 0x00000007, + regk_iop_sw_cfg_spu_gioout24 = 0x00000007, + regk_iop_sw_cfg_spu_gioout25 = 0x00000007, + regk_iop_sw_cfg_spu_gioout26 = 0x00000007, + regk_iop_sw_cfg_spu_gioout27 = 0x00000007, + regk_iop_sw_cfg_spu_gioout28 = 0x00000007, + regk_iop_sw_cfg_spu_gioout29 = 0x00000007, + regk_iop_sw_cfg_spu_gioout3 = 0x00000001, + regk_iop_sw_cfg_spu_gioout30 = 0x00000007, + regk_iop_sw_cfg_spu_gioout31 = 0x00000007, + regk_iop_sw_cfg_spu_gioout4 = 0x00000002, + regk_iop_sw_cfg_spu_gioout5 = 0x00000002, + regk_iop_sw_cfg_spu_gioout6 = 0x00000003, + regk_iop_sw_cfg_spu_gioout7 = 0x00000003, + regk_iop_sw_cfg_spu_gioout8 = 0x00000007, + regk_iop_sw_cfg_spu_gioout9 = 0x00000007, + regk_iop_sw_cfg_strb_timer_grp0_tmr0 = 0x00000001, + regk_iop_sw_cfg_strb_timer_grp0_tmr1 = 0x00000002, + regk_iop_sw_cfg_strb_timer_grp1_tmr0 = 0x00000003, + regk_iop_sw_cfg_strb_timer_grp1_tmr1 = 0x00000002, + regk_iop_sw_cfg_timer_grp0 = 0x00000000, + regk_iop_sw_cfg_timer_grp0_rot = 0x00000001, + regk_iop_sw_cfg_timer_grp0_strb0 = 0x00000005, + regk_iop_sw_cfg_timer_grp0_strb1 = 0x00000005, + regk_iop_sw_cfg_timer_grp0_strb2 = 0x00000005, + regk_iop_sw_cfg_timer_grp0_strb3 = 0x00000005, + regk_iop_sw_cfg_timer_grp0_tmr0 = 0x00000002, + regk_iop_sw_cfg_timer_grp1 = 0x00000000, + regk_iop_sw_cfg_timer_grp1_rot = 0x00000001, + regk_iop_sw_cfg_timer_grp1_strb0 = 0x00000006, + regk_iop_sw_cfg_timer_grp1_strb1 = 0x00000006, + regk_iop_sw_cfg_timer_grp1_strb2 = 0x00000006, + regk_iop_sw_cfg_timer_grp1_strb3 = 0x00000006, + regk_iop_sw_cfg_timer_grp1_tmr0 = 0x00000003, + regk_iop_sw_cfg_trig0_0 = 0x00000000, + regk_iop_sw_cfg_trig0_1 = 0x00000000, + regk_iop_sw_cfg_trig0_2 = 0x00000000, + regk_iop_sw_cfg_trig0_3 = 0x00000000, + regk_iop_sw_cfg_trig1_0 = 0x00000000, + regk_iop_sw_cfg_trig1_1 = 0x00000000, + regk_iop_sw_cfg_trig1_2 = 0x00000000, + regk_iop_sw_cfg_trig1_3 = 0x00000000, + regk_iop_sw_cfg_trig2_0 = 0x00000001, + regk_iop_sw_cfg_trig2_1 = 0x00000001, + regk_iop_sw_cfg_trig2_2 = 0x00000001, + regk_iop_sw_cfg_trig2_3 = 0x00000001, + regk_iop_sw_cfg_trig3_0 = 0x00000001, + regk_iop_sw_cfg_trig3_1 = 0x00000001, + regk_iop_sw_cfg_trig3_2 = 0x00000001, + regk_iop_sw_cfg_trig3_3 = 0x00000001, + regk_iop_sw_cfg_trig4_0 = 0x00000002, + regk_iop_sw_cfg_trig4_1 = 0x00000002, + regk_iop_sw_cfg_trig4_2 = 0x00000002, + regk_iop_sw_cfg_trig4_3 = 0x00000002, + regk_iop_sw_cfg_trig5_0 = 0x00000002, + regk_iop_sw_cfg_trig5_1 = 0x00000002, + regk_iop_sw_cfg_trig5_2 = 0x00000002, + regk_iop_sw_cfg_trig5_3 = 0x00000002, + regk_iop_sw_cfg_trig6_0 = 0x00000003, + regk_iop_sw_cfg_trig6_1 = 0x00000003, + regk_iop_sw_cfg_trig6_2 = 0x00000003, + regk_iop_sw_cfg_trig6_3 = 0x00000003, + regk_iop_sw_cfg_trig7_0 = 0x00000003, + regk_iop_sw_cfg_trig7_1 = 0x00000003, + regk_iop_sw_cfg_trig7_2 = 0x00000003, + regk_iop_sw_cfg_trig7_3 = 0x00000003 +}; +#endif /* __iop_sw_cfg_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sw_cpu_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sw_cpu_defs.h new file mode 100644 index 000000000000..a16f556370eb --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sw_cpu_defs.h @@ -0,0 +1,522 @@ +#ifndef __iop_sw_cpu_defs_h +#define __iop_sw_cpu_defs_h + +/* + * This file is autogenerated from + * file: iop_sw_cpu.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile iop_sw_cpu_defs.h iop_sw_cpu.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope iop_sw_cpu */ + +/* Register r_mpu_trace, scope iop_sw_cpu, type r */ +typedef unsigned int reg_iop_sw_cpu_r_mpu_trace; +#define REG_RD_ADDR_iop_sw_cpu_r_mpu_trace 0 + +/* Register r_spu_trace, scope iop_sw_cpu, type r */ +typedef unsigned int reg_iop_sw_cpu_r_spu_trace; +#define REG_RD_ADDR_iop_sw_cpu_r_spu_trace 4 + +/* Register r_spu_fsm_trace, scope iop_sw_cpu, type r */ +typedef unsigned int reg_iop_sw_cpu_r_spu_fsm_trace; +#define REG_RD_ADDR_iop_sw_cpu_r_spu_fsm_trace 8 + +/* Register rw_mc_ctrl, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int keep_owner : 1; + unsigned int cmd : 2; + unsigned int size : 3; + unsigned int wr_spu_mem : 1; + unsigned int dummy1 : 25; +} reg_iop_sw_cpu_rw_mc_ctrl; +#define REG_RD_ADDR_iop_sw_cpu_rw_mc_ctrl 12 +#define REG_WR_ADDR_iop_sw_cpu_rw_mc_ctrl 12 + +/* Register rw_mc_data, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_cpu_rw_mc_data; +#define REG_RD_ADDR_iop_sw_cpu_rw_mc_data 16 +#define REG_WR_ADDR_iop_sw_cpu_rw_mc_data 16 + +/* Register rw_mc_addr, scope iop_sw_cpu, type rw */ +typedef unsigned int reg_iop_sw_cpu_rw_mc_addr; +#define REG_RD_ADDR_iop_sw_cpu_rw_mc_addr 20 +#define REG_WR_ADDR_iop_sw_cpu_rw_mc_addr 20 + +/* Register rs_mc_data, scope iop_sw_cpu, type rs */ +typedef unsigned int reg_iop_sw_cpu_rs_mc_data; +#define REG_RD_ADDR_iop_sw_cpu_rs_mc_data 24 + +/* Register r_mc_data, scope iop_sw_cpu, type r */ +typedef unsigned int reg_iop_sw_cpu_r_mc_data; +#define REG_RD_ADDR_iop_sw_cpu_r_mc_data 28 + +/* Register r_mc_stat, scope iop_sw_cpu, type r */ +typedef struct { + unsigned int busy_cpu : 1; + unsigned int busy_mpu : 1; + unsigned int busy_spu : 1; + unsigned int owned_by_cpu : 1; + unsigned int owned_by_mpu : 1; + unsigned int owned_by_spu : 1; + unsigned int dummy1 : 26; +} reg_iop_sw_cpu_r_mc_stat; +#define REG_RD_ADDR_iop_sw_cpu_r_mc_stat 32 + +/* Register rw_bus_clr_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int byte2 : 8; + unsigned int byte3 : 8; +} reg_iop_sw_cpu_rw_bus_clr_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_bus_clr_mask 36 +#define REG_WR_ADDR_iop_sw_cpu_rw_bus_clr_mask 36 + +/* Register rw_bus_set_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int byte2 : 8; + unsigned int byte3 : 8; +} reg_iop_sw_cpu_rw_bus_set_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_bus_set_mask 40 +#define REG_WR_ADDR_iop_sw_cpu_rw_bus_set_mask 40 + +/* Register rw_bus_oe_clr_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int byte0 : 1; + unsigned int byte1 : 1; + unsigned int byte2 : 1; + unsigned int byte3 : 1; + unsigned int dummy1 : 28; +} reg_iop_sw_cpu_rw_bus_oe_clr_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_bus_oe_clr_mask 44 +#define REG_WR_ADDR_iop_sw_cpu_rw_bus_oe_clr_mask 44 + +/* Register rw_bus_oe_set_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int byte0 : 1; + unsigned int byte1 : 1; + unsigned int byte2 : 1; + unsigned int byte3 : 1; + unsigned int dummy1 : 28; +} reg_iop_sw_cpu_rw_bus_oe_set_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_bus_oe_set_mask 48 +#define REG_WR_ADDR_iop_sw_cpu_rw_bus_oe_set_mask 48 + +/* Register r_bus_in, scope iop_sw_cpu, type r */ +typedef unsigned int reg_iop_sw_cpu_r_bus_in; +#define REG_RD_ADDR_iop_sw_cpu_r_bus_in 52 + +/* Register rw_gio_clr_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_cpu_rw_gio_clr_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_gio_clr_mask 56 +#define REG_WR_ADDR_iop_sw_cpu_rw_gio_clr_mask 56 + +/* Register rw_gio_set_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_cpu_rw_gio_set_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_gio_set_mask 60 +#define REG_WR_ADDR_iop_sw_cpu_rw_gio_set_mask 60 + +/* Register rw_gio_oe_clr_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_cpu_rw_gio_oe_clr_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_gio_oe_clr_mask 64 +#define REG_WR_ADDR_iop_sw_cpu_rw_gio_oe_clr_mask 64 + +/* Register rw_gio_oe_set_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_cpu_rw_gio_oe_set_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_gio_oe_set_mask 68 +#define REG_WR_ADDR_iop_sw_cpu_rw_gio_oe_set_mask 68 + +/* Register r_gio_in, scope iop_sw_cpu, type r */ +typedef unsigned int reg_iop_sw_cpu_r_gio_in; +#define REG_RD_ADDR_iop_sw_cpu_r_gio_in 72 + +/* Register rw_intr0_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int mpu_0 : 1; + unsigned int mpu_1 : 1; + unsigned int mpu_2 : 1; + unsigned int mpu_3 : 1; + unsigned int mpu_4 : 1; + unsigned int mpu_5 : 1; + unsigned int mpu_6 : 1; + unsigned int mpu_7 : 1; + unsigned int mpu_8 : 1; + unsigned int mpu_9 : 1; + unsigned int mpu_10 : 1; + unsigned int mpu_11 : 1; + unsigned int mpu_12 : 1; + unsigned int mpu_13 : 1; + unsigned int mpu_14 : 1; + unsigned int mpu_15 : 1; + unsigned int spu_0 : 1; + unsigned int spu_1 : 1; + unsigned int spu_2 : 1; + unsigned int spu_3 : 1; + unsigned int spu_4 : 1; + unsigned int spu_5 : 1; + unsigned int spu_6 : 1; + unsigned int spu_7 : 1; + unsigned int spu_8 : 1; + unsigned int spu_9 : 1; + unsigned int spu_10 : 1; + unsigned int spu_11 : 1; + unsigned int spu_12 : 1; + unsigned int spu_13 : 1; + unsigned int spu_14 : 1; + unsigned int spu_15 : 1; +} reg_iop_sw_cpu_rw_intr0_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_intr0_mask 76 +#define REG_WR_ADDR_iop_sw_cpu_rw_intr0_mask 76 + +/* Register rw_ack_intr0, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int mpu_0 : 1; + unsigned int mpu_1 : 1; + unsigned int mpu_2 : 1; + unsigned int mpu_3 : 1; + unsigned int mpu_4 : 1; + unsigned int mpu_5 : 1; + unsigned int mpu_6 : 1; + unsigned int mpu_7 : 1; + unsigned int mpu_8 : 1; + unsigned int mpu_9 : 1; + unsigned int mpu_10 : 1; + unsigned int mpu_11 : 1; + unsigned int mpu_12 : 1; + unsigned int mpu_13 : 1; + unsigned int mpu_14 : 1; + unsigned int mpu_15 : 1; + unsigned int spu_0 : 1; + unsigned int spu_1 : 1; + unsigned int spu_2 : 1; + unsigned int spu_3 : 1; + unsigned int spu_4 : 1; + unsigned int spu_5 : 1; + unsigned int spu_6 : 1; + unsigned int spu_7 : 1; + unsigned int spu_8 : 1; + unsigned int spu_9 : 1; + unsigned int spu_10 : 1; + unsigned int spu_11 : 1; + unsigned int spu_12 : 1; + unsigned int spu_13 : 1; + unsigned int spu_14 : 1; + unsigned int spu_15 : 1; +} reg_iop_sw_cpu_rw_ack_intr0; +#define REG_RD_ADDR_iop_sw_cpu_rw_ack_intr0 80 +#define REG_WR_ADDR_iop_sw_cpu_rw_ack_intr0 80 + +/* Register r_intr0, scope iop_sw_cpu, type r */ +typedef struct { + unsigned int mpu_0 : 1; + unsigned int mpu_1 : 1; + unsigned int mpu_2 : 1; + unsigned int mpu_3 : 1; + unsigned int mpu_4 : 1; + unsigned int mpu_5 : 1; + unsigned int mpu_6 : 1; + unsigned int mpu_7 : 1; + unsigned int mpu_8 : 1; + unsigned int mpu_9 : 1; + unsigned int mpu_10 : 1; + unsigned int mpu_11 : 1; + unsigned int mpu_12 : 1; + unsigned int mpu_13 : 1; + unsigned int mpu_14 : 1; + unsigned int mpu_15 : 1; + unsigned int spu_0 : 1; + unsigned int spu_1 : 1; + unsigned int spu_2 : 1; + unsigned int spu_3 : 1; + unsigned int spu_4 : 1; + unsigned int spu_5 : 1; + unsigned int spu_6 : 1; + unsigned int spu_7 : 1; + unsigned int spu_8 : 1; + unsigned int spu_9 : 1; + unsigned int spu_10 : 1; + unsigned int spu_11 : 1; + unsigned int spu_12 : 1; + unsigned int spu_13 : 1; + unsigned int spu_14 : 1; + unsigned int spu_15 : 1; +} reg_iop_sw_cpu_r_intr0; +#define REG_RD_ADDR_iop_sw_cpu_r_intr0 84 + +/* Register r_masked_intr0, scope iop_sw_cpu, type r */ +typedef struct { + unsigned int mpu_0 : 1; + unsigned int mpu_1 : 1; + unsigned int mpu_2 : 1; + unsigned int mpu_3 : 1; + unsigned int mpu_4 : 1; + unsigned int mpu_5 : 1; + unsigned int mpu_6 : 1; + unsigned int mpu_7 : 1; + unsigned int mpu_8 : 1; + unsigned int mpu_9 : 1; + unsigned int mpu_10 : 1; + unsigned int mpu_11 : 1; + unsigned int mpu_12 : 1; + unsigned int mpu_13 : 1; + unsigned int mpu_14 : 1; + unsigned int mpu_15 : 1; + unsigned int spu_0 : 1; + unsigned int spu_1 : 1; + unsigned int spu_2 : 1; + unsigned int spu_3 : 1; + unsigned int spu_4 : 1; + unsigned int spu_5 : 1; + unsigned int spu_6 : 1; + unsigned int spu_7 : 1; + unsigned int spu_8 : 1; + unsigned int spu_9 : 1; + unsigned int spu_10 : 1; + unsigned int spu_11 : 1; + unsigned int spu_12 : 1; + unsigned int spu_13 : 1; + unsigned int spu_14 : 1; + unsigned int spu_15 : 1; +} reg_iop_sw_cpu_r_masked_intr0; +#define REG_RD_ADDR_iop_sw_cpu_r_masked_intr0 88 + +/* Register rw_intr1_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int mpu_16 : 1; + unsigned int mpu_17 : 1; + unsigned int mpu_18 : 1; + unsigned int mpu_19 : 1; + unsigned int mpu_20 : 1; + unsigned int mpu_21 : 1; + unsigned int mpu_22 : 1; + unsigned int mpu_23 : 1; + unsigned int mpu_24 : 1; + unsigned int mpu_25 : 1; + unsigned int mpu_26 : 1; + unsigned int mpu_27 : 1; + unsigned int mpu_28 : 1; + unsigned int mpu_29 : 1; + unsigned int mpu_30 : 1; + unsigned int mpu_31 : 1; + unsigned int dmc_in : 1; + unsigned int dmc_out : 1; + unsigned int fifo_in : 1; + unsigned int fifo_out : 1; + unsigned int fifo_in_extra : 1; + unsigned int fifo_out_extra : 1; + unsigned int trigger_grp0 : 1; + unsigned int trigger_grp1 : 1; + unsigned int trigger_grp2 : 1; + unsigned int trigger_grp3 : 1; + unsigned int trigger_grp4 : 1; + unsigned int trigger_grp5 : 1; + unsigned int trigger_grp6 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp0 : 1; + unsigned int timer_grp1 : 1; +} reg_iop_sw_cpu_rw_intr1_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_intr1_mask 92 +#define REG_WR_ADDR_iop_sw_cpu_rw_intr1_mask 92 + +/* Register rw_ack_intr1, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int mpu_16 : 1; + unsigned int mpu_17 : 1; + unsigned int mpu_18 : 1; + unsigned int mpu_19 : 1; + unsigned int mpu_20 : 1; + unsigned int mpu_21 : 1; + unsigned int mpu_22 : 1; + unsigned int mpu_23 : 1; + unsigned int mpu_24 : 1; + unsigned int mpu_25 : 1; + unsigned int mpu_26 : 1; + unsigned int mpu_27 : 1; + unsigned int mpu_28 : 1; + unsigned int mpu_29 : 1; + unsigned int mpu_30 : 1; + unsigned int mpu_31 : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_cpu_rw_ack_intr1; +#define REG_RD_ADDR_iop_sw_cpu_rw_ack_intr1 96 +#define REG_WR_ADDR_iop_sw_cpu_rw_ack_intr1 96 + +/* Register r_intr1, scope iop_sw_cpu, type r */ +typedef struct { + unsigned int mpu_16 : 1; + unsigned int mpu_17 : 1; + unsigned int mpu_18 : 1; + unsigned int mpu_19 : 1; + unsigned int mpu_20 : 1; + unsigned int mpu_21 : 1; + unsigned int mpu_22 : 1; + unsigned int mpu_23 : 1; + unsigned int mpu_24 : 1; + unsigned int mpu_25 : 1; + unsigned int mpu_26 : 1; + unsigned int mpu_27 : 1; + unsigned int mpu_28 : 1; + unsigned int mpu_29 : 1; + unsigned int mpu_30 : 1; + unsigned int mpu_31 : 1; + unsigned int dmc_in : 1; + unsigned int dmc_out : 1; + unsigned int fifo_in : 1; + unsigned int fifo_out : 1; + unsigned int fifo_in_extra : 1; + unsigned int fifo_out_extra : 1; + unsigned int trigger_grp0 : 1; + unsigned int trigger_grp1 : 1; + unsigned int trigger_grp2 : 1; + unsigned int trigger_grp3 : 1; + unsigned int trigger_grp4 : 1; + unsigned int trigger_grp5 : 1; + unsigned int trigger_grp6 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp0 : 1; + unsigned int timer_grp1 : 1; +} reg_iop_sw_cpu_r_intr1; +#define REG_RD_ADDR_iop_sw_cpu_r_intr1 100 + +/* Register r_masked_intr1, scope iop_sw_cpu, type r */ +typedef struct { + unsigned int mpu_16 : 1; + unsigned int mpu_17 : 1; + unsigned int mpu_18 : 1; + unsigned int mpu_19 : 1; + unsigned int mpu_20 : 1; + unsigned int mpu_21 : 1; + unsigned int mpu_22 : 1; + unsigned int mpu_23 : 1; + unsigned int mpu_24 : 1; + unsigned int mpu_25 : 1; + unsigned int mpu_26 : 1; + unsigned int mpu_27 : 1; + unsigned int mpu_28 : 1; + unsigned int mpu_29 : 1; + unsigned int mpu_30 : 1; + unsigned int mpu_31 : 1; + unsigned int dmc_in : 1; + unsigned int dmc_out : 1; + unsigned int fifo_in : 1; + unsigned int fifo_out : 1; + unsigned int fifo_in_extra : 1; + unsigned int fifo_out_extra : 1; + unsigned int trigger_grp0 : 1; + unsigned int trigger_grp1 : 1; + unsigned int trigger_grp2 : 1; + unsigned int trigger_grp3 : 1; + unsigned int trigger_grp4 : 1; + unsigned int trigger_grp5 : 1; + unsigned int trigger_grp6 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp0 : 1; + unsigned int timer_grp1 : 1; +} reg_iop_sw_cpu_r_masked_intr1; +#define REG_RD_ADDR_iop_sw_cpu_r_masked_intr1 104 + + +/* Constants */ +enum { + regk_iop_sw_cpu_copy = 0x00000000, + regk_iop_sw_cpu_no = 0x00000000, + regk_iop_sw_cpu_rd = 0x00000002, + regk_iop_sw_cpu_reg_copy = 0x00000001, + regk_iop_sw_cpu_rw_bus_clr_mask_default = 0x00000000, + regk_iop_sw_cpu_rw_bus_oe_clr_mask_default = 0x00000000, + regk_iop_sw_cpu_rw_bus_oe_set_mask_default = 0x00000000, + regk_iop_sw_cpu_rw_bus_set_mask_default = 0x00000000, + regk_iop_sw_cpu_rw_gio_clr_mask_default = 0x00000000, + regk_iop_sw_cpu_rw_gio_oe_clr_mask_default = 0x00000000, + regk_iop_sw_cpu_rw_gio_oe_set_mask_default = 0x00000000, + regk_iop_sw_cpu_rw_gio_set_mask_default = 0x00000000, + regk_iop_sw_cpu_rw_intr0_mask_default = 0x00000000, + regk_iop_sw_cpu_rw_intr1_mask_default = 0x00000000, + regk_iop_sw_cpu_wr = 0x00000003, + regk_iop_sw_cpu_yes = 0x00000001 +}; +#endif /* __iop_sw_cpu_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sw_mpu_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sw_mpu_defs.h new file mode 100644 index 000000000000..a2e4e1a33e57 --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sw_mpu_defs.h @@ -0,0 +1,648 @@ +#ifndef __iop_sw_mpu_defs_h +#define __iop_sw_mpu_defs_h + +/* + * This file is autogenerated from + * file: iop_sw_mpu.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile iop_sw_mpu_defs.h iop_sw_mpu.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope iop_sw_mpu */ + +/* Register rw_sw_cfg_owner, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_mpu_rw_sw_cfg_owner; +#define REG_RD_ADDR_iop_sw_mpu_rw_sw_cfg_owner 0 +#define REG_WR_ADDR_iop_sw_mpu_rw_sw_cfg_owner 0 + +/* Register r_spu_trace, scope iop_sw_mpu, type r */ +typedef unsigned int reg_iop_sw_mpu_r_spu_trace; +#define REG_RD_ADDR_iop_sw_mpu_r_spu_trace 4 + +/* Register r_spu_fsm_trace, scope iop_sw_mpu, type r */ +typedef unsigned int reg_iop_sw_mpu_r_spu_fsm_trace; +#define REG_RD_ADDR_iop_sw_mpu_r_spu_fsm_trace 8 + +/* Register rw_mc_ctrl, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int keep_owner : 1; + unsigned int cmd : 2; + unsigned int size : 3; + unsigned int wr_spu_mem : 1; + unsigned int dummy1 : 25; +} reg_iop_sw_mpu_rw_mc_ctrl; +#define REG_RD_ADDR_iop_sw_mpu_rw_mc_ctrl 12 +#define REG_WR_ADDR_iop_sw_mpu_rw_mc_ctrl 12 + +/* Register rw_mc_data, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_mpu_rw_mc_data; +#define REG_RD_ADDR_iop_sw_mpu_rw_mc_data 16 +#define REG_WR_ADDR_iop_sw_mpu_rw_mc_data 16 + +/* Register rw_mc_addr, scope iop_sw_mpu, type rw */ +typedef unsigned int reg_iop_sw_mpu_rw_mc_addr; +#define REG_RD_ADDR_iop_sw_mpu_rw_mc_addr 20 +#define REG_WR_ADDR_iop_sw_mpu_rw_mc_addr 20 + +/* Register rs_mc_data, scope iop_sw_mpu, type rs */ +typedef unsigned int reg_iop_sw_mpu_rs_mc_data; +#define REG_RD_ADDR_iop_sw_mpu_rs_mc_data 24 + +/* Register r_mc_data, scope iop_sw_mpu, type r */ +typedef unsigned int reg_iop_sw_mpu_r_mc_data; +#define REG_RD_ADDR_iop_sw_mpu_r_mc_data 28 + +/* Register r_mc_stat, scope iop_sw_mpu, type r */ +typedef struct { + unsigned int busy_cpu : 1; + unsigned int busy_mpu : 1; + unsigned int busy_spu : 1; + unsigned int owned_by_cpu : 1; + unsigned int owned_by_mpu : 1; + unsigned int owned_by_spu : 1; + unsigned int dummy1 : 26; +} reg_iop_sw_mpu_r_mc_stat; +#define REG_RD_ADDR_iop_sw_mpu_r_mc_stat 32 + +/* Register rw_bus_clr_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int byte2 : 8; + unsigned int byte3 : 8; +} reg_iop_sw_mpu_rw_bus_clr_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_bus_clr_mask 36 +#define REG_WR_ADDR_iop_sw_mpu_rw_bus_clr_mask 36 + +/* Register rw_bus_set_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int byte2 : 8; + unsigned int byte3 : 8; +} reg_iop_sw_mpu_rw_bus_set_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_bus_set_mask 40 +#define REG_WR_ADDR_iop_sw_mpu_rw_bus_set_mask 40 + +/* Register rw_bus_oe_clr_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int byte0 : 1; + unsigned int byte1 : 1; + unsigned int byte2 : 1; + unsigned int byte3 : 1; + unsigned int dummy1 : 28; +} reg_iop_sw_mpu_rw_bus_oe_clr_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_bus_oe_clr_mask 44 +#define REG_WR_ADDR_iop_sw_mpu_rw_bus_oe_clr_mask 44 + +/* Register rw_bus_oe_set_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int byte0 : 1; + unsigned int byte1 : 1; + unsigned int byte2 : 1; + unsigned int byte3 : 1; + unsigned int dummy1 : 28; +} reg_iop_sw_mpu_rw_bus_oe_set_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_bus_oe_set_mask 48 +#define REG_WR_ADDR_iop_sw_mpu_rw_bus_oe_set_mask 48 + +/* Register r_bus_in, scope iop_sw_mpu, type r */ +typedef unsigned int reg_iop_sw_mpu_r_bus_in; +#define REG_RD_ADDR_iop_sw_mpu_r_bus_in 52 + +/* Register rw_gio_clr_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_mpu_rw_gio_clr_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_gio_clr_mask 56 +#define REG_WR_ADDR_iop_sw_mpu_rw_gio_clr_mask 56 + +/* Register rw_gio_set_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_mpu_rw_gio_set_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_gio_set_mask 60 +#define REG_WR_ADDR_iop_sw_mpu_rw_gio_set_mask 60 + +/* Register rw_gio_oe_clr_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_mpu_rw_gio_oe_clr_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_gio_oe_clr_mask 64 +#define REG_WR_ADDR_iop_sw_mpu_rw_gio_oe_clr_mask 64 + +/* Register rw_gio_oe_set_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_mpu_rw_gio_oe_set_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_gio_oe_set_mask 68 +#define REG_WR_ADDR_iop_sw_mpu_rw_gio_oe_set_mask 68 + +/* Register r_gio_in, scope iop_sw_mpu, type r */ +typedef unsigned int reg_iop_sw_mpu_r_gio_in; +#define REG_RD_ADDR_iop_sw_mpu_r_gio_in 72 + +/* Register rw_cpu_intr, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int intr0 : 1; + unsigned int intr1 : 1; + unsigned int intr2 : 1; + unsigned int intr3 : 1; + unsigned int intr4 : 1; + unsigned int intr5 : 1; + unsigned int intr6 : 1; + unsigned int intr7 : 1; + unsigned int intr8 : 1; + unsigned int intr9 : 1; + unsigned int intr10 : 1; + unsigned int intr11 : 1; + unsigned int intr12 : 1; + unsigned int intr13 : 1; + unsigned int intr14 : 1; + unsigned int intr15 : 1; + unsigned int intr16 : 1; + unsigned int intr17 : 1; + unsigned int intr18 : 1; + unsigned int intr19 : 1; + unsigned int intr20 : 1; + unsigned int intr21 : 1; + unsigned int intr22 : 1; + unsigned int intr23 : 1; + unsigned int intr24 : 1; + unsigned int intr25 : 1; + unsigned int intr26 : 1; + unsigned int intr27 : 1; + unsigned int intr28 : 1; + unsigned int intr29 : 1; + unsigned int intr30 : 1; + unsigned int intr31 : 1; +} reg_iop_sw_mpu_rw_cpu_intr; +#define REG_RD_ADDR_iop_sw_mpu_rw_cpu_intr 76 +#define REG_WR_ADDR_iop_sw_mpu_rw_cpu_intr 76 + +/* Register r_cpu_intr, scope iop_sw_mpu, type r */ +typedef struct { + unsigned int intr0 : 1; + unsigned int intr1 : 1; + unsigned int intr2 : 1; + unsigned int intr3 : 1; + unsigned int intr4 : 1; + unsigned int intr5 : 1; + unsigned int intr6 : 1; + unsigned int intr7 : 1; + unsigned int intr8 : 1; + unsigned int intr9 : 1; + unsigned int intr10 : 1; + unsigned int intr11 : 1; + unsigned int intr12 : 1; + unsigned int intr13 : 1; + unsigned int intr14 : 1; + unsigned int intr15 : 1; + unsigned int intr16 : 1; + unsigned int intr17 : 1; + unsigned int intr18 : 1; + unsigned int intr19 : 1; + unsigned int intr20 : 1; + unsigned int intr21 : 1; + unsigned int intr22 : 1; + unsigned int intr23 : 1; + unsigned int intr24 : 1; + unsigned int intr25 : 1; + unsigned int intr26 : 1; + unsigned int intr27 : 1; + unsigned int intr28 : 1; + unsigned int intr29 : 1; + unsigned int intr30 : 1; + unsigned int intr31 : 1; +} reg_iop_sw_mpu_r_cpu_intr; +#define REG_RD_ADDR_iop_sw_mpu_r_cpu_intr 80 + +/* Register rw_intr_grp0_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int spu_intr0 : 1; + unsigned int trigger_grp0 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_out : 1; + unsigned int spu_intr1 : 1; + unsigned int trigger_grp1 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_in : 1; + unsigned int spu_intr2 : 1; + unsigned int trigger_grp2 : 1; + unsigned int fifo_out_extra : 1; + unsigned int dmc_out : 1; + unsigned int spu_intr3 : 1; + unsigned int trigger_grp3 : 1; + unsigned int fifo_in_extra : 1; + unsigned int dmc_in : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_mpu_rw_intr_grp0_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_intr_grp0_mask 84 +#define REG_WR_ADDR_iop_sw_mpu_rw_intr_grp0_mask 84 + +/* Register rw_ack_intr_grp0, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int spu_intr0 : 1; + unsigned int dummy1 : 3; + unsigned int spu_intr1 : 1; + unsigned int dummy2 : 3; + unsigned int spu_intr2 : 1; + unsigned int dummy3 : 3; + unsigned int spu_intr3 : 1; + unsigned int dummy4 : 19; +} reg_iop_sw_mpu_rw_ack_intr_grp0; +#define REG_RD_ADDR_iop_sw_mpu_rw_ack_intr_grp0 88 +#define REG_WR_ADDR_iop_sw_mpu_rw_ack_intr_grp0 88 + +/* Register r_intr_grp0, scope iop_sw_mpu, type r */ +typedef struct { + unsigned int spu_intr0 : 1; + unsigned int trigger_grp0 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_out : 1; + unsigned int spu_intr1 : 1; + unsigned int trigger_grp1 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_in : 1; + unsigned int spu_intr2 : 1; + unsigned int trigger_grp2 : 1; + unsigned int fifo_out_extra : 1; + unsigned int dmc_out : 1; + unsigned int spu_intr3 : 1; + unsigned int trigger_grp3 : 1; + unsigned int fifo_in_extra : 1; + unsigned int dmc_in : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_mpu_r_intr_grp0; +#define REG_RD_ADDR_iop_sw_mpu_r_intr_grp0 92 + +/* Register r_masked_intr_grp0, scope iop_sw_mpu, type r */ +typedef struct { + unsigned int spu_intr0 : 1; + unsigned int trigger_grp0 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_out : 1; + unsigned int spu_intr1 : 1; + unsigned int trigger_grp1 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_in : 1; + unsigned int spu_intr2 : 1; + unsigned int trigger_grp2 : 1; + unsigned int fifo_out_extra : 1; + unsigned int dmc_out : 1; + unsigned int spu_intr3 : 1; + unsigned int trigger_grp3 : 1; + unsigned int fifo_in_extra : 1; + unsigned int dmc_in : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_mpu_r_masked_intr_grp0; +#define REG_RD_ADDR_iop_sw_mpu_r_masked_intr_grp0 96 + +/* Register rw_intr_grp1_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int spu_intr4 : 1; + unsigned int trigger_grp4 : 1; + unsigned int fifo_out_extra : 1; + unsigned int dmc_out : 1; + unsigned int spu_intr5 : 1; + unsigned int trigger_grp5 : 1; + unsigned int fifo_in_extra : 1; + unsigned int dmc_in : 1; + unsigned int spu_intr6 : 1; + unsigned int trigger_grp6 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_out : 1; + unsigned int spu_intr7 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_in : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_mpu_rw_intr_grp1_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_intr_grp1_mask 100 +#define REG_WR_ADDR_iop_sw_mpu_rw_intr_grp1_mask 100 + +/* Register rw_ack_intr_grp1, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int spu_intr4 : 1; + unsigned int dummy1 : 3; + unsigned int spu_intr5 : 1; + unsigned int dummy2 : 3; + unsigned int spu_intr6 : 1; + unsigned int dummy3 : 3; + unsigned int spu_intr7 : 1; + unsigned int dummy4 : 19; +} reg_iop_sw_mpu_rw_ack_intr_grp1; +#define REG_RD_ADDR_iop_sw_mpu_rw_ack_intr_grp1 104 +#define REG_WR_ADDR_iop_sw_mpu_rw_ack_intr_grp1 104 + +/* Register r_intr_grp1, scope iop_sw_mpu, type r */ +typedef struct { + unsigned int spu_intr4 : 1; + unsigned int trigger_grp4 : 1; + unsigned int fifo_out_extra : 1; + unsigned int dmc_out : 1; + unsigned int spu_intr5 : 1; + unsigned int trigger_grp5 : 1; + unsigned int fifo_in_extra : 1; + unsigned int dmc_in : 1; + unsigned int spu_intr6 : 1; + unsigned int trigger_grp6 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_out : 1; + unsigned int spu_intr7 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_in : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_mpu_r_intr_grp1; +#define REG_RD_ADDR_iop_sw_mpu_r_intr_grp1 108 + +/* Register r_masked_intr_grp1, scope iop_sw_mpu, type r */ +typedef struct { + unsigned int spu_intr4 : 1; + unsigned int trigger_grp4 : 1; + unsigned int fifo_out_extra : 1; + unsigned int dmc_out : 1; + unsigned int spu_intr5 : 1; + unsigned int trigger_grp5 : 1; + unsigned int fifo_in_extra : 1; + unsigned int dmc_in : 1; + unsigned int spu_intr6 : 1; + unsigned int trigger_grp6 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_out : 1; + unsigned int spu_intr7 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_in : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_mpu_r_masked_intr_grp1; +#define REG_RD_ADDR_iop_sw_mpu_r_masked_intr_grp1 112 + +/* Register rw_intr_grp2_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int spu_intr8 : 1; + unsigned int trigger_grp0 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_out : 1; + unsigned int spu_intr9 : 1; + unsigned int trigger_grp1 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_in : 1; + unsigned int spu_intr10 : 1; + unsigned int trigger_grp2 : 1; + unsigned int fifo_out_extra : 1; + unsigned int dmc_out : 1; + unsigned int spu_intr11 : 1; + unsigned int trigger_grp3 : 1; + unsigned int fifo_in_extra : 1; + unsigned int dmc_in : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_mpu_rw_intr_grp2_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_intr_grp2_mask 116 +#define REG_WR_ADDR_iop_sw_mpu_rw_intr_grp2_mask 116 + +/* Register rw_ack_intr_grp2, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int spu_intr8 : 1; + unsigned int dummy1 : 3; + unsigned int spu_intr9 : 1; + unsigned int dummy2 : 3; + unsigned int spu_intr10 : 1; + unsigned int dummy3 : 3; + unsigned int spu_intr11 : 1; + unsigned int dummy4 : 19; +} reg_iop_sw_mpu_rw_ack_intr_grp2; +#define REG_RD_ADDR_iop_sw_mpu_rw_ack_intr_grp2 120 +#define REG_WR_ADDR_iop_sw_mpu_rw_ack_intr_grp2 120 + +/* Register r_intr_grp2, scope iop_sw_mpu, type r */ +typedef struct { + unsigned int spu_intr8 : 1; + unsigned int trigger_grp0 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_out : 1; + unsigned int spu_intr9 : 1; + unsigned int trigger_grp1 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_in : 1; + unsigned int spu_intr10 : 1; + unsigned int trigger_grp2 : 1; + unsigned int fifo_out_extra : 1; + unsigned int dmc_out : 1; + unsigned int spu_intr11 : 1; + unsigned int trigger_grp3 : 1; + unsigned int fifo_in_extra : 1; + unsigned int dmc_in : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_mpu_r_intr_grp2; +#define REG_RD_ADDR_iop_sw_mpu_r_intr_grp2 124 + +/* Register r_masked_intr_grp2, scope iop_sw_mpu, type r */ +typedef struct { + unsigned int spu_intr8 : 1; + unsigned int trigger_grp0 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_out : 1; + unsigned int spu_intr9 : 1; + unsigned int trigger_grp1 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_in : 1; + unsigned int spu_intr10 : 1; + unsigned int trigger_grp2 : 1; + unsigned int fifo_out_extra : 1; + unsigned int dmc_out : 1; + unsigned int spu_intr11 : 1; + unsigned int trigger_grp3 : 1; + unsigned int fifo_in_extra : 1; + unsigned int dmc_in : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_mpu_r_masked_intr_grp2; +#define REG_RD_ADDR_iop_sw_mpu_r_masked_intr_grp2 128 + +/* Register rw_intr_grp3_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int spu_intr12 : 1; + unsigned int trigger_grp4 : 1; + unsigned int fifo_out_extra : 1; + unsigned int dmc_out : 1; + unsigned int spu_intr13 : 1; + unsigned int trigger_grp5 : 1; + unsigned int fifo_in_extra : 1; + unsigned int dmc_in : 1; + unsigned int spu_intr14 : 1; + unsigned int trigger_grp6 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_out : 1; + unsigned int spu_intr15 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_in : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_mpu_rw_intr_grp3_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_intr_grp3_mask 132 +#define REG_WR_ADDR_iop_sw_mpu_rw_intr_grp3_mask 132 + +/* Register rw_ack_intr_grp3, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int spu_intr12 : 1; + unsigned int dummy1 : 3; + unsigned int spu_intr13 : 1; + unsigned int dummy2 : 3; + unsigned int spu_intr14 : 1; + unsigned int dummy3 : 3; + unsigned int spu_intr15 : 1; + unsigned int dummy4 : 19; +} reg_iop_sw_mpu_rw_ack_intr_grp3; +#define REG_RD_ADDR_iop_sw_mpu_rw_ack_intr_grp3 136 +#define REG_WR_ADDR_iop_sw_mpu_rw_ack_intr_grp3 136 + +/* Register r_intr_grp3, scope iop_sw_mpu, type r */ +typedef struct { + unsigned int spu_intr12 : 1; + unsigned int trigger_grp4 : 1; + unsigned int fifo_out_extra : 1; + unsigned int dmc_out : 1; + unsigned int spu_intr13 : 1; + unsigned int trigger_grp5 : 1; + unsigned int fifo_in_extra : 1; + unsigned int dmc_in : 1; + unsigned int spu_intr14 : 1; + unsigned int trigger_grp6 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_out : 1; + unsigned int spu_intr15 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_in : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_mpu_r_intr_grp3; +#define REG_RD_ADDR_iop_sw_mpu_r_intr_grp3 140 + +/* Register r_masked_intr_grp3, scope iop_sw_mpu, type r */ +typedef struct { + unsigned int spu_intr12 : 1; + unsigned int trigger_grp4 : 1; + unsigned int fifo_out_extra : 1; + unsigned int dmc_out : 1; + unsigned int spu_intr13 : 1; + unsigned int trigger_grp5 : 1; + unsigned int fifo_in_extra : 1; + unsigned int dmc_in : 1; + unsigned int spu_intr14 : 1; + unsigned int trigger_grp6 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_out : 1; + unsigned int spu_intr15 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_in : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_mpu_r_masked_intr_grp3; +#define REG_RD_ADDR_iop_sw_mpu_r_masked_intr_grp3 144 + + +/* Constants */ +enum { + regk_iop_sw_mpu_copy = 0x00000000, + regk_iop_sw_mpu_cpu = 0x00000000, + regk_iop_sw_mpu_mpu = 0x00000001, + regk_iop_sw_mpu_no = 0x00000000, + regk_iop_sw_mpu_nop = 0x00000000, + regk_iop_sw_mpu_rd = 0x00000002, + regk_iop_sw_mpu_reg_copy = 0x00000001, + regk_iop_sw_mpu_rw_bus_clr_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_bus_oe_clr_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_bus_oe_set_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_bus_set_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_gio_clr_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_gio_oe_clr_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_gio_oe_set_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_gio_set_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_intr_grp0_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_intr_grp1_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_intr_grp2_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_intr_grp3_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_sw_cfg_owner_default = 0x00000000, + regk_iop_sw_mpu_set = 0x00000001, + regk_iop_sw_mpu_spu = 0x00000002, + regk_iop_sw_mpu_wr = 0x00000003, + regk_iop_sw_mpu_yes = 0x00000001 +}; +#endif /* __iop_sw_mpu_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sw_spu_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sw_spu_defs.h new file mode 100644 index 000000000000..c8560b865a1a --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sw_spu_defs.h @@ -0,0 +1,441 @@ +#ifndef __iop_sw_spu_defs_h +#define __iop_sw_spu_defs_h + +/* + * This file is autogenerated from + * file: iop_sw_spu.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile iop_sw_spu_defs.h iop_sw_spu.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope iop_sw_spu */ + +/* Register r_mpu_trace, scope iop_sw_spu, type r */ +typedef unsigned int reg_iop_sw_spu_r_mpu_trace; +#define REG_RD_ADDR_iop_sw_spu_r_mpu_trace 0 + +/* Register rw_mc_ctrl, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int keep_owner : 1; + unsigned int cmd : 2; + unsigned int size : 3; + unsigned int wr_spu_mem : 1; + unsigned int dummy1 : 25; +} reg_iop_sw_spu_rw_mc_ctrl; +#define REG_RD_ADDR_iop_sw_spu_rw_mc_ctrl 4 +#define REG_WR_ADDR_iop_sw_spu_rw_mc_ctrl 4 + +/* Register rw_mc_data, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_spu_rw_mc_data; +#define REG_RD_ADDR_iop_sw_spu_rw_mc_data 8 +#define REG_WR_ADDR_iop_sw_spu_rw_mc_data 8 + +/* Register rw_mc_addr, scope iop_sw_spu, type rw */ +typedef unsigned int reg_iop_sw_spu_rw_mc_addr; +#define REG_RD_ADDR_iop_sw_spu_rw_mc_addr 12 +#define REG_WR_ADDR_iop_sw_spu_rw_mc_addr 12 + +/* Register rs_mc_data, scope iop_sw_spu, type rs */ +typedef unsigned int reg_iop_sw_spu_rs_mc_data; +#define REG_RD_ADDR_iop_sw_spu_rs_mc_data 16 + +/* Register r_mc_data, scope iop_sw_spu, type r */ +typedef unsigned int reg_iop_sw_spu_r_mc_data; +#define REG_RD_ADDR_iop_sw_spu_r_mc_data 20 + +/* Register r_mc_stat, scope iop_sw_spu, type r */ +typedef struct { + unsigned int busy_cpu : 1; + unsigned int busy_mpu : 1; + unsigned int busy_spu : 1; + unsigned int owned_by_cpu : 1; + unsigned int owned_by_mpu : 1; + unsigned int owned_by_spu : 1; + unsigned int dummy1 : 26; +} reg_iop_sw_spu_r_mc_stat; +#define REG_RD_ADDR_iop_sw_spu_r_mc_stat 24 + +/* Register rw_bus_clr_mask, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int byte2 : 8; + unsigned int byte3 : 8; +} reg_iop_sw_spu_rw_bus_clr_mask; +#define REG_RD_ADDR_iop_sw_spu_rw_bus_clr_mask 28 +#define REG_WR_ADDR_iop_sw_spu_rw_bus_clr_mask 28 + +/* Register rw_bus_set_mask, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int byte2 : 8; + unsigned int byte3 : 8; +} reg_iop_sw_spu_rw_bus_set_mask; +#define REG_RD_ADDR_iop_sw_spu_rw_bus_set_mask 32 +#define REG_WR_ADDR_iop_sw_spu_rw_bus_set_mask 32 + +/* Register rw_bus_oe_clr_mask, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int byte0 : 1; + unsigned int byte1 : 1; + unsigned int byte2 : 1; + unsigned int byte3 : 1; + unsigned int dummy1 : 28; +} reg_iop_sw_spu_rw_bus_oe_clr_mask; +#define REG_RD_ADDR_iop_sw_spu_rw_bus_oe_clr_mask 36 +#define REG_WR_ADDR_iop_sw_spu_rw_bus_oe_clr_mask 36 + +/* Register rw_bus_oe_set_mask, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int byte0 : 1; + unsigned int byte1 : 1; + unsigned int byte2 : 1; + unsigned int byte3 : 1; + unsigned int dummy1 : 28; +} reg_iop_sw_spu_rw_bus_oe_set_mask; +#define REG_RD_ADDR_iop_sw_spu_rw_bus_oe_set_mask 40 +#define REG_WR_ADDR_iop_sw_spu_rw_bus_oe_set_mask 40 + +/* Register r_bus_in, scope iop_sw_spu, type r */ +typedef unsigned int reg_iop_sw_spu_r_bus_in; +#define REG_RD_ADDR_iop_sw_spu_r_bus_in 44 + +/* Register rw_gio_clr_mask, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_spu_rw_gio_clr_mask; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_clr_mask 48 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_clr_mask 48 + +/* Register rw_gio_set_mask, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_spu_rw_gio_set_mask; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_set_mask 52 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_set_mask 52 + +/* Register rw_gio_oe_clr_mask, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_spu_rw_gio_oe_clr_mask; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_oe_clr_mask 56 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_oe_clr_mask 56 + +/* Register rw_gio_oe_set_mask, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_spu_rw_gio_oe_set_mask; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_oe_set_mask 60 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_oe_set_mask 60 + +/* Register r_gio_in, scope iop_sw_spu, type r */ +typedef unsigned int reg_iop_sw_spu_r_gio_in; +#define REG_RD_ADDR_iop_sw_spu_r_gio_in 64 + +/* Register rw_bus_clr_mask_lo, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_bus_clr_mask_lo; +#define REG_RD_ADDR_iop_sw_spu_rw_bus_clr_mask_lo 68 +#define REG_WR_ADDR_iop_sw_spu_rw_bus_clr_mask_lo 68 + +/* Register rw_bus_clr_mask_hi, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int byte2 : 8; + unsigned int byte3 : 8; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_bus_clr_mask_hi; +#define REG_RD_ADDR_iop_sw_spu_rw_bus_clr_mask_hi 72 +#define REG_WR_ADDR_iop_sw_spu_rw_bus_clr_mask_hi 72 + +/* Register rw_bus_set_mask_lo, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_bus_set_mask_lo; +#define REG_RD_ADDR_iop_sw_spu_rw_bus_set_mask_lo 76 +#define REG_WR_ADDR_iop_sw_spu_rw_bus_set_mask_lo 76 + +/* Register rw_bus_set_mask_hi, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int byte2 : 8; + unsigned int byte3 : 8; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_bus_set_mask_hi; +#define REG_RD_ADDR_iop_sw_spu_rw_bus_set_mask_hi 80 +#define REG_WR_ADDR_iop_sw_spu_rw_bus_set_mask_hi 80 + +/* Register rw_gio_clr_mask_lo, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 16; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_gio_clr_mask_lo; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_clr_mask_lo 84 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_clr_mask_lo 84 + +/* Register rw_gio_clr_mask_hi, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 16; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_gio_clr_mask_hi; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_clr_mask_hi 88 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_clr_mask_hi 88 + +/* Register rw_gio_set_mask_lo, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 16; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_gio_set_mask_lo; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_set_mask_lo 92 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_set_mask_lo 92 + +/* Register rw_gio_set_mask_hi, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 16; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_gio_set_mask_hi; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_set_mask_hi 96 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_set_mask_hi 96 + +/* Register rw_gio_oe_clr_mask_lo, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 16; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_gio_oe_clr_mask_lo; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_oe_clr_mask_lo 100 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_oe_clr_mask_lo 100 + +/* Register rw_gio_oe_clr_mask_hi, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 16; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_gio_oe_clr_mask_hi; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_oe_clr_mask_hi 104 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_oe_clr_mask_hi 104 + +/* Register rw_gio_oe_set_mask_lo, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 16; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_gio_oe_set_mask_lo; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_oe_set_mask_lo 108 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_oe_set_mask_lo 108 + +/* Register rw_gio_oe_set_mask_hi, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 16; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_gio_oe_set_mask_hi; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_oe_set_mask_hi 112 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_oe_set_mask_hi 112 + +/* Register rw_cpu_intr, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int intr0 : 1; + unsigned int intr1 : 1; + unsigned int intr2 : 1; + unsigned int intr3 : 1; + unsigned int intr4 : 1; + unsigned int intr5 : 1; + unsigned int intr6 : 1; + unsigned int intr7 : 1; + unsigned int intr8 : 1; + unsigned int intr9 : 1; + unsigned int intr10 : 1; + unsigned int intr11 : 1; + unsigned int intr12 : 1; + unsigned int intr13 : 1; + unsigned int intr14 : 1; + unsigned int intr15 : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_cpu_intr; +#define REG_RD_ADDR_iop_sw_spu_rw_cpu_intr 116 +#define REG_WR_ADDR_iop_sw_spu_rw_cpu_intr 116 + +/* Register r_cpu_intr, scope iop_sw_spu, type r */ +typedef struct { + unsigned int intr0 : 1; + unsigned int intr1 : 1; + unsigned int intr2 : 1; + unsigned int intr3 : 1; + unsigned int intr4 : 1; + unsigned int intr5 : 1; + unsigned int intr6 : 1; + unsigned int intr7 : 1; + unsigned int intr8 : 1; + unsigned int intr9 : 1; + unsigned int intr10 : 1; + unsigned int intr11 : 1; + unsigned int intr12 : 1; + unsigned int intr13 : 1; + unsigned int intr14 : 1; + unsigned int intr15 : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_r_cpu_intr; +#define REG_RD_ADDR_iop_sw_spu_r_cpu_intr 120 + +/* Register r_hw_intr, scope iop_sw_spu, type r */ +typedef struct { + unsigned int trigger_grp0 : 1; + unsigned int trigger_grp1 : 1; + unsigned int trigger_grp2 : 1; + unsigned int trigger_grp3 : 1; + unsigned int trigger_grp4 : 1; + unsigned int trigger_grp5 : 1; + unsigned int trigger_grp6 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp0 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_out : 1; + unsigned int fifo_out_extra : 1; + unsigned int fifo_in : 1; + unsigned int fifo_in_extra : 1; + unsigned int dmc_out : 1; + unsigned int dmc_in : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_r_hw_intr; +#define REG_RD_ADDR_iop_sw_spu_r_hw_intr 124 + +/* Register rw_mpu_intr, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int intr0 : 1; + unsigned int intr1 : 1; + unsigned int intr2 : 1; + unsigned int intr3 : 1; + unsigned int intr4 : 1; + unsigned int intr5 : 1; + unsigned int intr6 : 1; + unsigned int intr7 : 1; + unsigned int intr8 : 1; + unsigned int intr9 : 1; + unsigned int intr10 : 1; + unsigned int intr11 : 1; + unsigned int intr12 : 1; + unsigned int intr13 : 1; + unsigned int intr14 : 1; + unsigned int intr15 : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_mpu_intr; +#define REG_RD_ADDR_iop_sw_spu_rw_mpu_intr 128 +#define REG_WR_ADDR_iop_sw_spu_rw_mpu_intr 128 + +/* Register r_mpu_intr, scope iop_sw_spu, type r */ +typedef struct { + unsigned int intr0 : 1; + unsigned int intr1 : 1; + unsigned int intr2 : 1; + unsigned int intr3 : 1; + unsigned int intr4 : 1; + unsigned int intr5 : 1; + unsigned int intr6 : 1; + unsigned int intr7 : 1; + unsigned int intr8 : 1; + unsigned int intr9 : 1; + unsigned int intr10 : 1; + unsigned int intr11 : 1; + unsigned int intr12 : 1; + unsigned int intr13 : 1; + unsigned int intr14 : 1; + unsigned int intr15 : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_r_mpu_intr; +#define REG_RD_ADDR_iop_sw_spu_r_mpu_intr 132 + + +/* Constants */ +enum { + regk_iop_sw_spu_copy = 0x00000000, + regk_iop_sw_spu_no = 0x00000000, + regk_iop_sw_spu_nop = 0x00000000, + regk_iop_sw_spu_rd = 0x00000002, + regk_iop_sw_spu_reg_copy = 0x00000001, + regk_iop_sw_spu_rw_bus_clr_mask_default = 0x00000000, + regk_iop_sw_spu_rw_bus_oe_clr_mask_default = 0x00000000, + regk_iop_sw_spu_rw_bus_oe_set_mask_default = 0x00000000, + regk_iop_sw_spu_rw_bus_set_mask_default = 0x00000000, + regk_iop_sw_spu_rw_gio_clr_mask_default = 0x00000000, + regk_iop_sw_spu_rw_gio_oe_clr_mask_default = 0x00000000, + regk_iop_sw_spu_rw_gio_oe_set_mask_default = 0x00000000, + regk_iop_sw_spu_rw_gio_set_mask_default = 0x00000000, + regk_iop_sw_spu_set = 0x00000001, + regk_iop_sw_spu_wr = 0x00000003, + regk_iop_sw_spu_yes = 0x00000001 +}; +#endif /* __iop_sw_spu_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_version_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_version_defs.h new file mode 100644 index 000000000000..20de425e652b --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_version_defs.h @@ -0,0 +1,96 @@ +#ifndef __iop_version_defs_h +#define __iop_version_defs_h + +/* + * This file is autogenerated from + * file: iop_version.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile iop_version_defs.h iop_version.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope iop_version */ + +/* Register r_version, scope iop_version, type r */ +typedef struct { + unsigned int nr : 8; + unsigned int dummy1 : 24; +} reg_iop_version_r_version; +#define REG_RD_ADDR_iop_version_r_version 0 + + +/* Constants */ +enum { + regk_iop_version_v2_0 = 0x00000002 +}; +#endif /* __iop_version_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/l2cache_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/l2cache_defs.h new file mode 100644 index 000000000000..243ac3c882cb --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/l2cache_defs.h @@ -0,0 +1,142 @@ +#ifndef __l2cache_defs_h +#define __l2cache_defs_h + +/* + * This file is autogenerated from + * file: l2cache.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile l2cache_defs.h l2cache.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope l2cache */ + +/* Register rw_cfg, scope l2cache, type rw */ +typedef struct { + unsigned int en : 1; + unsigned int dummy1 : 31; +} reg_l2cache_rw_cfg; +#define REG_RD_ADDR_l2cache_rw_cfg 0 +#define REG_WR_ADDR_l2cache_rw_cfg 0 + +/* Register rw_ctrl, scope l2cache, type rw */ +typedef struct { + unsigned int dummy1 : 7; + unsigned int cbase : 9; + unsigned int dummy2 : 4; + unsigned int csize : 10; + unsigned int dummy3 : 2; +} reg_l2cache_rw_ctrl; +#define REG_RD_ADDR_l2cache_rw_ctrl 4 +#define REG_WR_ADDR_l2cache_rw_ctrl 4 + +/* Register rw_idxop, scope l2cache, type rw */ +typedef struct { + unsigned int idx : 10; + unsigned int dummy1 : 14; + unsigned int way : 3; + unsigned int dummy2 : 2; + unsigned int cmd : 3; +} reg_l2cache_rw_idxop; +#define REG_RD_ADDR_l2cache_rw_idxop 8 +#define REG_WR_ADDR_l2cache_rw_idxop 8 + +/* Register rw_addrop_addr, scope l2cache, type rw */ +typedef struct { + unsigned int addr : 32; +} reg_l2cache_rw_addrop_addr; +#define REG_RD_ADDR_l2cache_rw_addrop_addr 12 +#define REG_WR_ADDR_l2cache_rw_addrop_addr 12 + +/* Register rw_addrop_ctrl, scope l2cache, type rw */ +typedef struct { + unsigned int size : 16; + unsigned int dummy1 : 13; + unsigned int cmd : 3; +} reg_l2cache_rw_addrop_ctrl; +#define REG_RD_ADDR_l2cache_rw_addrop_ctrl 16 +#define REG_WR_ADDR_l2cache_rw_addrop_ctrl 16 + + +/* Constants */ +enum { + regk_l2cache_flush = 0x00000001, + regk_l2cache_no = 0x00000000, + regk_l2cache_rw_addrop_addr_default = 0x00000000, + regk_l2cache_rw_addrop_ctrl_default = 0x00000000, + regk_l2cache_rw_cfg_default = 0x00000000, + regk_l2cache_rw_ctrl_default = 0x00000000, + regk_l2cache_rw_idxop_default = 0x00000000, + regk_l2cache_yes = 0x00000001 +}; +#endif /* __l2cache_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/marb_bar_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/marb_bar_defs.h new file mode 100644 index 000000000000..c0e7628cbf7d --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/marb_bar_defs.h @@ -0,0 +1,482 @@ +#ifndef __marb_bar_defs_h +#define __marb_bar_defs_h + +/* + * This file is autogenerated from + * file: marb_bar.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile marb_bar_defs.h marb_bar.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope marb_bar */ + +#define STRIDE_marb_bar_rw_ddr2_slots 4 +/* Register rw_ddr2_slots, scope marb_bar, type rw */ +typedef struct { + unsigned int owner : 4; + unsigned int dummy1 : 28; +} reg_marb_bar_rw_ddr2_slots; +#define REG_RD_ADDR_marb_bar_rw_ddr2_slots 0 +#define REG_WR_ADDR_marb_bar_rw_ddr2_slots 0 + +/* Register rw_h264_rd_burst, scope marb_bar, type rw */ +typedef struct { + unsigned int ddr2_bsize : 2; + unsigned int dummy1 : 30; +} reg_marb_bar_rw_h264_rd_burst; +#define REG_RD_ADDR_marb_bar_rw_h264_rd_burst 256 +#define REG_WR_ADDR_marb_bar_rw_h264_rd_burst 256 + +/* Register rw_h264_wr_burst, scope marb_bar, type rw */ +typedef struct { + unsigned int ddr2_bsize : 2; + unsigned int dummy1 : 30; +} reg_marb_bar_rw_h264_wr_burst; +#define REG_RD_ADDR_marb_bar_rw_h264_wr_burst 260 +#define REG_WR_ADDR_marb_bar_rw_h264_wr_burst 260 + +/* Register rw_ccd_burst, scope marb_bar, type rw */ +typedef struct { + unsigned int ddr2_bsize : 2; + unsigned int dummy1 : 30; +} reg_marb_bar_rw_ccd_burst; +#define REG_RD_ADDR_marb_bar_rw_ccd_burst 264 +#define REG_WR_ADDR_marb_bar_rw_ccd_burst 264 + +/* Register rw_vin_wr_burst, scope marb_bar, type rw */ +typedef struct { + unsigned int ddr2_bsize : 2; + unsigned int dummy1 : 30; +} reg_marb_bar_rw_vin_wr_burst; +#define REG_RD_ADDR_marb_bar_rw_vin_wr_burst 268 +#define REG_WR_ADDR_marb_bar_rw_vin_wr_burst 268 + +/* Register rw_vin_rd_burst, scope marb_bar, type rw */ +typedef struct { + unsigned int ddr2_bsize : 2; + unsigned int dummy1 : 30; +} reg_marb_bar_rw_vin_rd_burst; +#define REG_RD_ADDR_marb_bar_rw_vin_rd_burst 272 +#define REG_WR_ADDR_marb_bar_rw_vin_rd_burst 272 + +/* Register rw_sclr_rd_burst, scope marb_bar, type rw */ +typedef struct { + unsigned int ddr2_bsize : 2; + unsigned int dummy1 : 30; +} reg_marb_bar_rw_sclr_rd_burst; +#define REG_RD_ADDR_marb_bar_rw_sclr_rd_burst 276 +#define REG_WR_ADDR_marb_bar_rw_sclr_rd_burst 276 + +/* Register rw_vout_burst, scope marb_bar, type rw */ +typedef struct { + unsigned int ddr2_bsize : 2; + unsigned int dummy1 : 30; +} reg_marb_bar_rw_vout_burst; +#define REG_RD_ADDR_marb_bar_rw_vout_burst 280 +#define REG_WR_ADDR_marb_bar_rw_vout_burst 280 + +/* Register rw_sclr_fifo_burst, scope marb_bar, type rw */ +typedef struct { + unsigned int ddr2_bsize : 2; + unsigned int dummy1 : 30; +} reg_marb_bar_rw_sclr_fifo_burst; +#define REG_RD_ADDR_marb_bar_rw_sclr_fifo_burst 284 +#define REG_WR_ADDR_marb_bar_rw_sclr_fifo_burst 284 + +/* Register rw_l2cache_burst, scope marb_bar, type rw */ +typedef struct { + unsigned int ddr2_bsize : 2; + unsigned int dummy1 : 30; +} reg_marb_bar_rw_l2cache_burst; +#define REG_RD_ADDR_marb_bar_rw_l2cache_burst 288 +#define REG_WR_ADDR_marb_bar_rw_l2cache_burst 288 + +/* Register rw_intr_mask, scope marb_bar, type rw */ +typedef struct { + unsigned int bp0 : 1; + unsigned int bp1 : 1; + unsigned int bp2 : 1; + unsigned int bp3 : 1; + unsigned int dummy1 : 28; +} reg_marb_bar_rw_intr_mask; +#define REG_RD_ADDR_marb_bar_rw_intr_mask 292 +#define REG_WR_ADDR_marb_bar_rw_intr_mask 292 + +/* Register rw_ack_intr, scope marb_bar, type rw */ +typedef struct { + unsigned int bp0 : 1; + unsigned int bp1 : 1; + unsigned int bp2 : 1; + unsigned int bp3 : 1; + unsigned int dummy1 : 28; +} reg_marb_bar_rw_ack_intr; +#define REG_RD_ADDR_marb_bar_rw_ack_intr 296 +#define REG_WR_ADDR_marb_bar_rw_ack_intr 296 + +/* Register r_intr, scope marb_bar, type r */ +typedef struct { + unsigned int bp0 : 1; + unsigned int bp1 : 1; + unsigned int bp2 : 1; + unsigned int bp3 : 1; + unsigned int dummy1 : 28; +} reg_marb_bar_r_intr; +#define REG_RD_ADDR_marb_bar_r_intr 300 + +/* Register r_masked_intr, scope marb_bar, type r */ +typedef struct { + unsigned int bp0 : 1; + unsigned int bp1 : 1; + unsigned int bp2 : 1; + unsigned int bp3 : 1; + unsigned int dummy1 : 28; +} reg_marb_bar_r_masked_intr; +#define REG_RD_ADDR_marb_bar_r_masked_intr 304 + +/* Register rw_stop_mask, scope marb_bar, type rw */ +typedef struct { + unsigned int h264_rd : 1; + unsigned int h264_wr : 1; + unsigned int ccd : 1; + unsigned int vin_wr : 1; + unsigned int vin_rd : 1; + unsigned int sclr_rd : 1; + unsigned int vout : 1; + unsigned int sclr_fifo : 1; + unsigned int l2cache : 1; + unsigned int dummy1 : 23; +} reg_marb_bar_rw_stop_mask; +#define REG_RD_ADDR_marb_bar_rw_stop_mask 308 +#define REG_WR_ADDR_marb_bar_rw_stop_mask 308 + +/* Register r_stopped, scope marb_bar, type r */ +typedef struct { + unsigned int h264_rd : 1; + unsigned int h264_wr : 1; + unsigned int ccd : 1; + unsigned int vin_wr : 1; + unsigned int vin_rd : 1; + unsigned int sclr_rd : 1; + unsigned int vout : 1; + unsigned int sclr_fifo : 1; + unsigned int l2cache : 1; + unsigned int dummy1 : 23; +} reg_marb_bar_r_stopped; +#define REG_RD_ADDR_marb_bar_r_stopped 312 + +/* Register rw_no_snoop, scope marb_bar, type rw */ +typedef struct { + unsigned int h264_rd : 1; + unsigned int h264_wr : 1; + unsigned int ccd : 1; + unsigned int vin_wr : 1; + unsigned int vin_rd : 1; + unsigned int sclr_rd : 1; + unsigned int vout : 1; + unsigned int sclr_fifo : 1; + unsigned int l2cache : 1; + unsigned int dummy1 : 23; +} reg_marb_bar_rw_no_snoop; +#define REG_RD_ADDR_marb_bar_rw_no_snoop 576 +#define REG_WR_ADDR_marb_bar_rw_no_snoop 576 + + +/* Constants */ +enum { + regk_marb_bar_ccd = 0x00000002, + regk_marb_bar_h264_rd = 0x00000000, + regk_marb_bar_h264_wr = 0x00000001, + regk_marb_bar_l2cache = 0x00000008, + regk_marb_bar_no = 0x00000000, + regk_marb_bar_r_stopped_default = 0x00000000, + regk_marb_bar_rw_ccd_burst_default = 0x00000000, + regk_marb_bar_rw_ddr2_slots_default = 0x00000000, + regk_marb_bar_rw_ddr2_slots_size = 0x00000040, + regk_marb_bar_rw_h264_rd_burst_default = 0x00000000, + regk_marb_bar_rw_h264_wr_burst_default = 0x00000000, + regk_marb_bar_rw_intr_mask_default = 0x00000000, + regk_marb_bar_rw_l2cache_burst_default = 0x00000000, + regk_marb_bar_rw_no_snoop_default = 0x00000000, + regk_marb_bar_rw_sclr_fifo_burst_default = 0x00000000, + regk_marb_bar_rw_sclr_rd_burst_default = 0x00000000, + regk_marb_bar_rw_stop_mask_default = 0x00000000, + regk_marb_bar_rw_vin_rd_burst_default = 0x00000000, + regk_marb_bar_rw_vin_wr_burst_default = 0x00000000, + regk_marb_bar_rw_vout_burst_default = 0x00000000, + regk_marb_bar_sclr_fifo = 0x00000007, + regk_marb_bar_sclr_rd = 0x00000005, + regk_marb_bar_vin_rd = 0x00000004, + regk_marb_bar_vin_wr = 0x00000003, + regk_marb_bar_vout = 0x00000006, + regk_marb_bar_yes = 0x00000001 +}; +#endif /* __marb_bar_defs_h */ +#ifndef __marb_bar_bp_defs_h +#define __marb_bar_bp_defs_h + +/* + * This file is autogenerated from + * file: marb_bar.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile marb_bar_defs.h marb_bar.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope marb_bar_bp */ + +/* Register rw_first_addr, scope marb_bar_bp, type rw */ +typedef unsigned int reg_marb_bar_bp_rw_first_addr; +#define REG_RD_ADDR_marb_bar_bp_rw_first_addr 0 +#define REG_WR_ADDR_marb_bar_bp_rw_first_addr 0 + +/* Register rw_last_addr, scope marb_bar_bp, type rw */ +typedef unsigned int reg_marb_bar_bp_rw_last_addr; +#define REG_RD_ADDR_marb_bar_bp_rw_last_addr 4 +#define REG_WR_ADDR_marb_bar_bp_rw_last_addr 4 + +/* Register rw_op, scope marb_bar_bp, type rw */ +typedef struct { + unsigned int rd : 1; + unsigned int wr : 1; + unsigned int rd_excl : 1; + unsigned int pri_wr : 1; + unsigned int us_rd : 1; + unsigned int us_wr : 1; + unsigned int us_rd_excl : 1; + unsigned int us_pri_wr : 1; + unsigned int dummy1 : 24; +} reg_marb_bar_bp_rw_op; +#define REG_RD_ADDR_marb_bar_bp_rw_op 8 +#define REG_WR_ADDR_marb_bar_bp_rw_op 8 + +/* Register rw_clients, scope marb_bar_bp, type rw */ +typedef struct { + unsigned int h264_rd : 1; + unsigned int h264_wr : 1; + unsigned int ccd : 1; + unsigned int vin_wr : 1; + unsigned int vin_rd : 1; + unsigned int sclr_rd : 1; + unsigned int vout : 1; + unsigned int sclr_fifo : 1; + unsigned int l2cache : 1; + unsigned int dummy1 : 23; +} reg_marb_bar_bp_rw_clients; +#define REG_RD_ADDR_marb_bar_bp_rw_clients 12 +#define REG_WR_ADDR_marb_bar_bp_rw_clients 12 + +/* Register rw_options, scope marb_bar_bp, type rw */ +typedef struct { + unsigned int wrap : 1; + unsigned int dummy1 : 31; +} reg_marb_bar_bp_rw_options; +#define REG_RD_ADDR_marb_bar_bp_rw_options 16 +#define REG_WR_ADDR_marb_bar_bp_rw_options 16 + +/* Register r_brk_addr, scope marb_bar_bp, type r */ +typedef unsigned int reg_marb_bar_bp_r_brk_addr; +#define REG_RD_ADDR_marb_bar_bp_r_brk_addr 20 + +/* Register r_brk_op, scope marb_bar_bp, type r */ +typedef struct { + unsigned int rd : 1; + unsigned int wr : 1; + unsigned int rd_excl : 1; + unsigned int pri_wr : 1; + unsigned int us_rd : 1; + unsigned int us_wr : 1; + unsigned int us_rd_excl : 1; + unsigned int us_pri_wr : 1; + unsigned int dummy1 : 24; +} reg_marb_bar_bp_r_brk_op; +#define REG_RD_ADDR_marb_bar_bp_r_brk_op 24 + +/* Register r_brk_clients, scope marb_bar_bp, type r */ +typedef struct { + unsigned int h264_rd : 1; + unsigned int h264_wr : 1; + unsigned int ccd : 1; + unsigned int vin_wr : 1; + unsigned int vin_rd : 1; + unsigned int sclr_rd : 1; + unsigned int vout : 1; + unsigned int sclr_fifo : 1; + unsigned int l2cache : 1; + unsigned int dummy1 : 23; +} reg_marb_bar_bp_r_brk_clients; +#define REG_RD_ADDR_marb_bar_bp_r_brk_clients 28 + +/* Register r_brk_first_client, scope marb_bar_bp, type r */ +typedef struct { + unsigned int h264_rd : 1; + unsigned int h264_wr : 1; + unsigned int ccd : 1; + unsigned int vin_wr : 1; + unsigned int vin_rd : 1; + unsigned int sclr_rd : 1; + unsigned int vout : 1; + unsigned int sclr_fifo : 1; + unsigned int l2cache : 1; + unsigned int dummy1 : 23; +} reg_marb_bar_bp_r_brk_first_client; +#define REG_RD_ADDR_marb_bar_bp_r_brk_first_client 32 + +/* Register r_brk_size, scope marb_bar_bp, type r */ +typedef unsigned int reg_marb_bar_bp_r_brk_size; +#define REG_RD_ADDR_marb_bar_bp_r_brk_size 36 + +/* Register rw_ack, scope marb_bar_bp, type rw */ +typedef unsigned int reg_marb_bar_bp_rw_ack; +#define REG_RD_ADDR_marb_bar_bp_rw_ack 40 +#define REG_WR_ADDR_marb_bar_bp_rw_ack 40 + + +/* Constants */ +enum { + regk_marb_bar_bp_no = 0x00000000, + regk_marb_bar_bp_rw_op_default = 0x00000000, + regk_marb_bar_bp_rw_options_default = 0x00000000, + regk_marb_bar_bp_yes = 0x00000001 +}; +#endif /* __marb_bar_bp_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/marb_foo_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/marb_foo_defs.h new file mode 100644 index 000000000000..2baa833f109a --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/marb_foo_defs.h @@ -0,0 +1,626 @@ +#ifndef __marb_foo_defs_h +#define __marb_foo_defs_h + +/* + * This file is autogenerated from + * file: marb_foo.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile marb_foo_defs.h marb_foo.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope marb_foo */ + +#define STRIDE_marb_foo_rw_intm_slots 4 +/* Register rw_intm_slots, scope marb_foo, type rw */ +typedef struct { + unsigned int owner : 4; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_intm_slots; +#define REG_RD_ADDR_marb_foo_rw_intm_slots 0 +#define REG_WR_ADDR_marb_foo_rw_intm_slots 0 + +#define STRIDE_marb_foo_rw_l2_slots 4 +/* Register rw_l2_slots, scope marb_foo, type rw */ +typedef struct { + unsigned int owner : 4; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_l2_slots; +#define REG_RD_ADDR_marb_foo_rw_l2_slots 256 +#define REG_WR_ADDR_marb_foo_rw_l2_slots 256 + +#define STRIDE_marb_foo_rw_regs_slots 4 +/* Register rw_regs_slots, scope marb_foo, type rw */ +typedef struct { + unsigned int owner : 4; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_regs_slots; +#define REG_RD_ADDR_marb_foo_rw_regs_slots 512 +#define REG_WR_ADDR_marb_foo_rw_regs_slots 512 + +/* Register rw_sclr_burst, scope marb_foo, type rw */ +typedef struct { + unsigned int intm_bsize : 2; + unsigned int l2_bsize : 2; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_sclr_burst; +#define REG_RD_ADDR_marb_foo_rw_sclr_burst 528 +#define REG_WR_ADDR_marb_foo_rw_sclr_burst 528 + +/* Register rw_dma0_burst, scope marb_foo, type rw */ +typedef struct { + unsigned int intm_bsize : 2; + unsigned int l2_bsize : 2; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_dma0_burst; +#define REG_RD_ADDR_marb_foo_rw_dma0_burst 532 +#define REG_WR_ADDR_marb_foo_rw_dma0_burst 532 + +/* Register rw_dma1_burst, scope marb_foo, type rw */ +typedef struct { + unsigned int intm_bsize : 2; + unsigned int l2_bsize : 2; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_dma1_burst; +#define REG_RD_ADDR_marb_foo_rw_dma1_burst 536 +#define REG_WR_ADDR_marb_foo_rw_dma1_burst 536 + +/* Register rw_dma2_burst, scope marb_foo, type rw */ +typedef struct { + unsigned int intm_bsize : 2; + unsigned int l2_bsize : 2; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_dma2_burst; +#define REG_RD_ADDR_marb_foo_rw_dma2_burst 540 +#define REG_WR_ADDR_marb_foo_rw_dma2_burst 540 + +/* Register rw_dma3_burst, scope marb_foo, type rw */ +typedef struct { + unsigned int intm_bsize : 2; + unsigned int l2_bsize : 2; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_dma3_burst; +#define REG_RD_ADDR_marb_foo_rw_dma3_burst 544 +#define REG_WR_ADDR_marb_foo_rw_dma3_burst 544 + +/* Register rw_dma4_burst, scope marb_foo, type rw */ +typedef struct { + unsigned int intm_bsize : 2; + unsigned int l2_bsize : 2; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_dma4_burst; +#define REG_RD_ADDR_marb_foo_rw_dma4_burst 548 +#define REG_WR_ADDR_marb_foo_rw_dma4_burst 548 + +/* Register rw_dma5_burst, scope marb_foo, type rw */ +typedef struct { + unsigned int intm_bsize : 2; + unsigned int l2_bsize : 2; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_dma5_burst; +#define REG_RD_ADDR_marb_foo_rw_dma5_burst 552 +#define REG_WR_ADDR_marb_foo_rw_dma5_burst 552 + +/* Register rw_dma6_burst, scope marb_foo, type rw */ +typedef struct { + unsigned int intm_bsize : 2; + unsigned int l2_bsize : 2; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_dma6_burst; +#define REG_RD_ADDR_marb_foo_rw_dma6_burst 556 +#define REG_WR_ADDR_marb_foo_rw_dma6_burst 556 + +/* Register rw_dma7_burst, scope marb_foo, type rw */ +typedef struct { + unsigned int intm_bsize : 2; + unsigned int l2_bsize : 2; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_dma7_burst; +#define REG_RD_ADDR_marb_foo_rw_dma7_burst 560 +#define REG_WR_ADDR_marb_foo_rw_dma7_burst 560 + +/* Register rw_dma9_burst, scope marb_foo, type rw */ +typedef struct { + unsigned int intm_bsize : 2; + unsigned int l2_bsize : 2; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_dma9_burst; +#define REG_RD_ADDR_marb_foo_rw_dma9_burst 564 +#define REG_WR_ADDR_marb_foo_rw_dma9_burst 564 + +/* Register rw_dma11_burst, scope marb_foo, type rw */ +typedef struct { + unsigned int intm_bsize : 2; + unsigned int l2_bsize : 2; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_dma11_burst; +#define REG_RD_ADDR_marb_foo_rw_dma11_burst 568 +#define REG_WR_ADDR_marb_foo_rw_dma11_burst 568 + +/* Register rw_cpui_burst, scope marb_foo, type rw */ +typedef struct { + unsigned int intm_bsize : 2; + unsigned int l2_bsize : 2; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_cpui_burst; +#define REG_RD_ADDR_marb_foo_rw_cpui_burst 572 +#define REG_WR_ADDR_marb_foo_rw_cpui_burst 572 + +/* Register rw_cpud_burst, scope marb_foo, type rw */ +typedef struct { + unsigned int intm_bsize : 2; + unsigned int l2_bsize : 2; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_cpud_burst; +#define REG_RD_ADDR_marb_foo_rw_cpud_burst 576 +#define REG_WR_ADDR_marb_foo_rw_cpud_burst 576 + +/* Register rw_iop_burst, scope marb_foo, type rw */ +typedef struct { + unsigned int intm_bsize : 2; + unsigned int l2_bsize : 2; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_iop_burst; +#define REG_RD_ADDR_marb_foo_rw_iop_burst 580 +#define REG_WR_ADDR_marb_foo_rw_iop_burst 580 + +/* Register rw_ccdstat_burst, scope marb_foo, type rw */ +typedef struct { + unsigned int intm_bsize : 2; + unsigned int l2_bsize : 2; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_ccdstat_burst; +#define REG_RD_ADDR_marb_foo_rw_ccdstat_burst 584 +#define REG_WR_ADDR_marb_foo_rw_ccdstat_burst 584 + +/* Register rw_intr_mask, scope marb_foo, type rw */ +typedef struct { + unsigned int bp0 : 1; + unsigned int bp1 : 1; + unsigned int bp2 : 1; + unsigned int bp3 : 1; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_intr_mask; +#define REG_RD_ADDR_marb_foo_rw_intr_mask 588 +#define REG_WR_ADDR_marb_foo_rw_intr_mask 588 + +/* Register rw_ack_intr, scope marb_foo, type rw */ +typedef struct { + unsigned int bp0 : 1; + unsigned int bp1 : 1; + unsigned int bp2 : 1; + unsigned int bp3 : 1; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_ack_intr; +#define REG_RD_ADDR_marb_foo_rw_ack_intr 592 +#define REG_WR_ADDR_marb_foo_rw_ack_intr 592 + +/* Register r_intr, scope marb_foo, type r */ +typedef struct { + unsigned int bp0 : 1; + unsigned int bp1 : 1; + unsigned int bp2 : 1; + unsigned int bp3 : 1; + unsigned int dummy1 : 28; +} reg_marb_foo_r_intr; +#define REG_RD_ADDR_marb_foo_r_intr 596 + +/* Register r_masked_intr, scope marb_foo, type r */ +typedef struct { + unsigned int bp0 : 1; + unsigned int bp1 : 1; + unsigned int bp2 : 1; + unsigned int bp3 : 1; + unsigned int dummy1 : 28; +} reg_marb_foo_r_masked_intr; +#define REG_RD_ADDR_marb_foo_r_masked_intr 600 + +/* Register rw_stop_mask, scope marb_foo, type rw */ +typedef struct { + unsigned int sclr : 1; + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma9 : 1; + unsigned int dma11 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int ccdstat : 1; + unsigned int dummy1 : 17; +} reg_marb_foo_rw_stop_mask; +#define REG_RD_ADDR_marb_foo_rw_stop_mask 604 +#define REG_WR_ADDR_marb_foo_rw_stop_mask 604 + +/* Register r_stopped, scope marb_foo, type r */ +typedef struct { + unsigned int sclr : 1; + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma9 : 1; + unsigned int dma11 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int ccdstat : 1; + unsigned int dummy1 : 17; +} reg_marb_foo_r_stopped; +#define REG_RD_ADDR_marb_foo_r_stopped 608 + +/* Register rw_no_snoop, scope marb_foo, type rw */ +typedef struct { + unsigned int sclr : 1; + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma9 : 1; + unsigned int dma11 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int ccdstat : 1; + unsigned int dummy1 : 17; +} reg_marb_foo_rw_no_snoop; +#define REG_RD_ADDR_marb_foo_rw_no_snoop 896 +#define REG_WR_ADDR_marb_foo_rw_no_snoop 896 + +/* Register rw_no_snoop_rq, scope marb_foo, type rw */ +typedef struct { + unsigned int dummy1 : 11; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int dummy2 : 19; +} reg_marb_foo_rw_no_snoop_rq; +#define REG_RD_ADDR_marb_foo_rw_no_snoop_rq 900 +#define REG_WR_ADDR_marb_foo_rw_no_snoop_rq 900 + + +/* Constants */ +enum { + regk_marb_foo_ccdstat = 0x0000000e, + regk_marb_foo_cpud = 0x0000000c, + regk_marb_foo_cpui = 0x0000000b, + regk_marb_foo_dma0 = 0x00000001, + regk_marb_foo_dma1 = 0x00000002, + regk_marb_foo_dma11 = 0x0000000a, + regk_marb_foo_dma2 = 0x00000003, + regk_marb_foo_dma3 = 0x00000004, + regk_marb_foo_dma4 = 0x00000005, + regk_marb_foo_dma5 = 0x00000006, + regk_marb_foo_dma6 = 0x00000007, + regk_marb_foo_dma7 = 0x00000008, + regk_marb_foo_dma9 = 0x00000009, + regk_marb_foo_iop = 0x0000000d, + regk_marb_foo_no = 0x00000000, + regk_marb_foo_r_stopped_default = 0x00000000, + regk_marb_foo_rw_ccdstat_burst_default = 0x00000000, + regk_marb_foo_rw_cpud_burst_default = 0x00000000, + regk_marb_foo_rw_cpui_burst_default = 0x00000000, + regk_marb_foo_rw_dma0_burst_default = 0x00000000, + regk_marb_foo_rw_dma11_burst_default = 0x00000000, + regk_marb_foo_rw_dma1_burst_default = 0x00000000, + regk_marb_foo_rw_dma2_burst_default = 0x00000000, + regk_marb_foo_rw_dma3_burst_default = 0x00000000, + regk_marb_foo_rw_dma4_burst_default = 0x00000000, + regk_marb_foo_rw_dma5_burst_default = 0x00000000, + regk_marb_foo_rw_dma6_burst_default = 0x00000000, + regk_marb_foo_rw_dma7_burst_default = 0x00000000, + regk_marb_foo_rw_dma9_burst_default = 0x00000000, + regk_marb_foo_rw_intm_slots_default = 0x00000000, + regk_marb_foo_rw_intm_slots_size = 0x00000040, + regk_marb_foo_rw_intr_mask_default = 0x00000000, + regk_marb_foo_rw_iop_burst_default = 0x00000000, + regk_marb_foo_rw_l2_slots_default = 0x00000000, + regk_marb_foo_rw_l2_slots_size = 0x00000040, + regk_marb_foo_rw_no_snoop_default = 0x00000000, + regk_marb_foo_rw_no_snoop_rq_default = 0x00000000, + regk_marb_foo_rw_regs_slots_default = 0x00000000, + regk_marb_foo_rw_regs_slots_size = 0x00000004, + regk_marb_foo_rw_sclr_burst_default = 0x00000000, + regk_marb_foo_rw_stop_mask_default = 0x00000000, + regk_marb_foo_sclr = 0x00000000, + regk_marb_foo_yes = 0x00000001 +}; +#endif /* __marb_foo_defs_h */ +#ifndef __marb_foo_bp_defs_h +#define __marb_foo_bp_defs_h + +/* + * This file is autogenerated from + * file: marb_foo.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile marb_foo_defs.h marb_foo.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope marb_foo_bp */ + +/* Register rw_first_addr, scope marb_foo_bp, type rw */ +typedef unsigned int reg_marb_foo_bp_rw_first_addr; +#define REG_RD_ADDR_marb_foo_bp_rw_first_addr 0 +#define REG_WR_ADDR_marb_foo_bp_rw_first_addr 0 + +/* Register rw_last_addr, scope marb_foo_bp, type rw */ +typedef unsigned int reg_marb_foo_bp_rw_last_addr; +#define REG_RD_ADDR_marb_foo_bp_rw_last_addr 4 +#define REG_WR_ADDR_marb_foo_bp_rw_last_addr 4 + +/* Register rw_op, scope marb_foo_bp, type rw */ +typedef struct { + unsigned int rd : 1; + unsigned int wr : 1; + unsigned int rd_excl : 1; + unsigned int pri_wr : 1; + unsigned int us_rd : 1; + unsigned int us_wr : 1; + unsigned int us_rd_excl : 1; + unsigned int us_pri_wr : 1; + unsigned int dummy1 : 24; +} reg_marb_foo_bp_rw_op; +#define REG_RD_ADDR_marb_foo_bp_rw_op 8 +#define REG_WR_ADDR_marb_foo_bp_rw_op 8 + +/* Register rw_clients, scope marb_foo_bp, type rw */ +typedef struct { + unsigned int sclr : 1; + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma9 : 1; + unsigned int dma11 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int ccdstat : 1; + unsigned int dummy1 : 17; +} reg_marb_foo_bp_rw_clients; +#define REG_RD_ADDR_marb_foo_bp_rw_clients 12 +#define REG_WR_ADDR_marb_foo_bp_rw_clients 12 + +/* Register rw_options, scope marb_foo_bp, type rw */ +typedef struct { + unsigned int wrap : 1; + unsigned int dummy1 : 31; +} reg_marb_foo_bp_rw_options; +#define REG_RD_ADDR_marb_foo_bp_rw_options 16 +#define REG_WR_ADDR_marb_foo_bp_rw_options 16 + +/* Register r_brk_addr, scope marb_foo_bp, type r */ +typedef unsigned int reg_marb_foo_bp_r_brk_addr; +#define REG_RD_ADDR_marb_foo_bp_r_brk_addr 20 + +/* Register r_brk_op, scope marb_foo_bp, type r */ +typedef struct { + unsigned int rd : 1; + unsigned int wr : 1; + unsigned int rd_excl : 1; + unsigned int pri_wr : 1; + unsigned int us_rd : 1; + unsigned int us_wr : 1; + unsigned int us_rd_excl : 1; + unsigned int us_pri_wr : 1; + unsigned int dummy1 : 24; +} reg_marb_foo_bp_r_brk_op; +#define REG_RD_ADDR_marb_foo_bp_r_brk_op 24 + +/* Register r_brk_clients, scope marb_foo_bp, type r */ +typedef struct { + unsigned int sclr : 1; + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma9 : 1; + unsigned int dma11 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int ccdstat : 1; + unsigned int dummy1 : 17; +} reg_marb_foo_bp_r_brk_clients; +#define REG_RD_ADDR_marb_foo_bp_r_brk_clients 28 + +/* Register r_brk_first_client, scope marb_foo_bp, type r */ +typedef struct { + unsigned int sclr : 1; + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma9 : 1; + unsigned int dma11 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int ccdstat : 1; + unsigned int dummy1 : 17; +} reg_marb_foo_bp_r_brk_first_client; +#define REG_RD_ADDR_marb_foo_bp_r_brk_first_client 32 + +/* Register r_brk_size, scope marb_foo_bp, type r */ +typedef unsigned int reg_marb_foo_bp_r_brk_size; +#define REG_RD_ADDR_marb_foo_bp_r_brk_size 36 + +/* Register rw_ack, scope marb_foo_bp, type rw */ +typedef unsigned int reg_marb_foo_bp_rw_ack; +#define REG_RD_ADDR_marb_foo_bp_rw_ack 40 +#define REG_WR_ADDR_marb_foo_bp_rw_ack 40 + + +/* Constants */ +enum { + regk_marb_foo_bp_no = 0x00000000, + regk_marb_foo_bp_rw_op_default = 0x00000000, + regk_marb_foo_bp_rw_options_default = 0x00000000, + regk_marb_foo_bp_yes = 0x00000001 +}; +#endif /* __marb_foo_bp_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/pinmux_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/pinmux_defs.h new file mode 100644 index 000000000000..4b96cd2cba8a --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/pinmux_defs.h @@ -0,0 +1,312 @@ +#ifndef __pinmux_defs_h +#define __pinmux_defs_h + +/* + * This file is autogenerated from + * file: pinmux.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile pinmux_defs.h pinmux.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope pinmux */ + +/* Register rw_hwprot, scope pinmux, type rw */ +typedef struct { + unsigned int eth : 1; + unsigned int eth_mdio : 1; + unsigned int geth : 1; + unsigned int tg : 1; + unsigned int tg_clk : 1; + unsigned int vout : 1; + unsigned int vout_sync : 1; + unsigned int ser1 : 1; + unsigned int ser2 : 1; + unsigned int ser3 : 1; + unsigned int ser4 : 1; + unsigned int sser : 1; + unsigned int pwm0 : 1; + unsigned int pwm1 : 1; + unsigned int pwm2 : 1; + unsigned int timer0 : 1; + unsigned int timer1 : 1; + unsigned int pio : 1; + unsigned int i2c0 : 1; + unsigned int i2c1 : 1; + unsigned int i2c1_sda1 : 1; + unsigned int i2c1_sda2 : 1; + unsigned int i2c1_sda3 : 1; + unsigned int i2c1_sen : 1; + unsigned int dummy1 : 8; +} reg_pinmux_rw_hwprot; +#define REG_RD_ADDR_pinmux_rw_hwprot 0 +#define REG_WR_ADDR_pinmux_rw_hwprot 0 + +/* Register rw_gio_pa, scope pinmux, type rw */ +typedef struct { + unsigned int pa0 : 1; + unsigned int pa1 : 1; + unsigned int pa2 : 1; + unsigned int pa3 : 1; + unsigned int pa4 : 1; + unsigned int pa5 : 1; + unsigned int pa6 : 1; + unsigned int pa7 : 1; + unsigned int pa8 : 1; + unsigned int pa9 : 1; + unsigned int pa10 : 1; + unsigned int pa11 : 1; + unsigned int pa12 : 1; + unsigned int pa13 : 1; + unsigned int pa14 : 1; + unsigned int pa15 : 1; + unsigned int pa16 : 1; + unsigned int pa17 : 1; + unsigned int pa18 : 1; + unsigned int pa19 : 1; + unsigned int pa20 : 1; + unsigned int pa21 : 1; + unsigned int pa22 : 1; + unsigned int pa23 : 1; + unsigned int pa24 : 1; + unsigned int pa25 : 1; + unsigned int pa26 : 1; + unsigned int pa27 : 1; + unsigned int pa28 : 1; + unsigned int pa29 : 1; + unsigned int pa30 : 1; + unsigned int pa31 : 1; +} reg_pinmux_rw_gio_pa; +#define REG_RD_ADDR_pinmux_rw_gio_pa 4 +#define REG_WR_ADDR_pinmux_rw_gio_pa 4 + +/* Register rw_gio_pb, scope pinmux, type rw */ +typedef struct { + unsigned int pb0 : 1; + unsigned int pb1 : 1; + unsigned int pb2 : 1; + unsigned int pb3 : 1; + unsigned int pb4 : 1; + unsigned int pb5 : 1; + unsigned int pb6 : 1; + unsigned int pb7 : 1; + unsigned int pb8 : 1; + unsigned int pb9 : 1; + unsigned int pb10 : 1; + unsigned int pb11 : 1; + unsigned int pb12 : 1; + unsigned int pb13 : 1; + unsigned int pb14 : 1; + unsigned int pb15 : 1; + unsigned int pb16 : 1; + unsigned int pb17 : 1; + unsigned int pb18 : 1; + unsigned int pb19 : 1; + unsigned int pb20 : 1; + unsigned int pb21 : 1; + unsigned int pb22 : 1; + unsigned int pb23 : 1; + unsigned int pb24 : 1; + unsigned int pb25 : 1; + unsigned int pb26 : 1; + unsigned int pb27 : 1; + unsigned int pb28 : 1; + unsigned int pb29 : 1; + unsigned int pb30 : 1; + unsigned int pb31 : 1; +} reg_pinmux_rw_gio_pb; +#define REG_RD_ADDR_pinmux_rw_gio_pb 8 +#define REG_WR_ADDR_pinmux_rw_gio_pb 8 + +/* Register rw_gio_pc, scope pinmux, type rw */ +typedef struct { + unsigned int pc0 : 1; + unsigned int pc1 : 1; + unsigned int pc2 : 1; + unsigned int pc3 : 1; + unsigned int pc4 : 1; + unsigned int pc5 : 1; + unsigned int pc6 : 1; + unsigned int pc7 : 1; + unsigned int pc8 : 1; + unsigned int pc9 : 1; + unsigned int pc10 : 1; + unsigned int pc11 : 1; + unsigned int pc12 : 1; + unsigned int pc13 : 1; + unsigned int pc14 : 1; + unsigned int pc15 : 1; + unsigned int dummy1 : 16; +} reg_pinmux_rw_gio_pc; +#define REG_RD_ADDR_pinmux_rw_gio_pc 12 +#define REG_WR_ADDR_pinmux_rw_gio_pc 12 + +/* Register rw_iop_pa, scope pinmux, type rw */ +typedef struct { + unsigned int pa0 : 1; + unsigned int pa1 : 1; + unsigned int pa2 : 1; + unsigned int pa3 : 1; + unsigned int pa4 : 1; + unsigned int pa5 : 1; + unsigned int pa6 : 1; + unsigned int pa7 : 1; + unsigned int pa8 : 1; + unsigned int pa9 : 1; + unsigned int pa10 : 1; + unsigned int pa11 : 1; + unsigned int pa12 : 1; + unsigned int pa13 : 1; + unsigned int pa14 : 1; + unsigned int pa15 : 1; + unsigned int pa16 : 1; + unsigned int pa17 : 1; + unsigned int pa18 : 1; + unsigned int pa19 : 1; + unsigned int pa20 : 1; + unsigned int pa21 : 1; + unsigned int pa22 : 1; + unsigned int pa23 : 1; + unsigned int pa24 : 1; + unsigned int pa25 : 1; + unsigned int pa26 : 1; + unsigned int pa27 : 1; + unsigned int pa28 : 1; + unsigned int pa29 : 1; + unsigned int pa30 : 1; + unsigned int pa31 : 1; +} reg_pinmux_rw_iop_pa; +#define REG_RD_ADDR_pinmux_rw_iop_pa 16 +#define REG_WR_ADDR_pinmux_rw_iop_pa 16 + +/* Register rw_iop_pb, scope pinmux, type rw */ +typedef struct { + unsigned int pb0 : 1; + unsigned int pb1 : 1; + unsigned int pb2 : 1; + unsigned int pb3 : 1; + unsigned int pb4 : 1; + unsigned int pb5 : 1; + unsigned int pb6 : 1; + unsigned int pb7 : 1; + unsigned int dummy1 : 24; +} reg_pinmux_rw_iop_pb; +#define REG_RD_ADDR_pinmux_rw_iop_pb 20 +#define REG_WR_ADDR_pinmux_rw_iop_pb 20 + +/* Register rw_iop_pio, scope pinmux, type rw */ +typedef struct { + unsigned int d0 : 1; + unsigned int d1 : 1; + unsigned int d2 : 1; + unsigned int d3 : 1; + unsigned int d4 : 1; + unsigned int d5 : 1; + unsigned int d6 : 1; + unsigned int d7 : 1; + unsigned int rd_n : 1; + unsigned int wr_n : 1; + unsigned int a0 : 1; + unsigned int a1 : 1; + unsigned int ce0_n : 1; + unsigned int ce1_n : 1; + unsigned int ce2_n : 1; + unsigned int rdy : 1; + unsigned int dummy1 : 16; +} reg_pinmux_rw_iop_pio; +#define REG_RD_ADDR_pinmux_rw_iop_pio 24 +#define REG_WR_ADDR_pinmux_rw_iop_pio 24 + +/* Register rw_iop_usb, scope pinmux, type rw */ +typedef struct { + unsigned int usb0 : 1; + unsigned int dummy1 : 31; +} reg_pinmux_rw_iop_usb; +#define REG_RD_ADDR_pinmux_rw_iop_usb 28 +#define REG_WR_ADDR_pinmux_rw_iop_usb 28 + + +/* Constants */ +enum { + regk_pinmux_no = 0x00000000, + regk_pinmux_rw_gio_pa_default = 0x00000000, + regk_pinmux_rw_gio_pb_default = 0x00000000, + regk_pinmux_rw_gio_pc_default = 0x00000000, + regk_pinmux_rw_hwprot_default = 0x00000000, + regk_pinmux_rw_iop_pa_default = 0x00000000, + regk_pinmux_rw_iop_pb_default = 0x00000000, + regk_pinmux_rw_iop_pio_default = 0x00000000, + regk_pinmux_rw_iop_usb_default = 0x00000001, + regk_pinmux_yes = 0x00000001 +}; +#endif /* __pinmux_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/pio_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/pio_defs.h new file mode 100644 index 000000000000..2d8e4b4cc602 --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/pio_defs.h @@ -0,0 +1,371 @@ +#ifndef __pio_defs_h +#define __pio_defs_h + +/* + * This file is autogenerated from + * file: pio.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile pio_defs.h pio.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope pio */ + +/* Register rw_data, scope pio, type rw */ +typedef unsigned int reg_pio_rw_data; +#define REG_RD_ADDR_pio_rw_data 64 +#define REG_WR_ADDR_pio_rw_data 64 + +/* Register rw_io_access0, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_pio_rw_io_access0; +#define REG_RD_ADDR_pio_rw_io_access0 0 +#define REG_WR_ADDR_pio_rw_io_access0 0 + +/* Register rw_io_access1, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_pio_rw_io_access1; +#define REG_RD_ADDR_pio_rw_io_access1 4 +#define REG_WR_ADDR_pio_rw_io_access1 4 + +/* Register rw_io_access2, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_pio_rw_io_access2; +#define REG_RD_ADDR_pio_rw_io_access2 8 +#define REG_WR_ADDR_pio_rw_io_access2 8 + +/* Register rw_io_access3, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_pio_rw_io_access3; +#define REG_RD_ADDR_pio_rw_io_access3 12 +#define REG_WR_ADDR_pio_rw_io_access3 12 + +/* Register rw_io_access4, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_pio_rw_io_access4; +#define REG_RD_ADDR_pio_rw_io_access4 16 +#define REG_WR_ADDR_pio_rw_io_access4 16 + +/* Register rw_io_access5, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_pio_rw_io_access5; +#define REG_RD_ADDR_pio_rw_io_access5 20 +#define REG_WR_ADDR_pio_rw_io_access5 20 + +/* Register rw_io_access6, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_pio_rw_io_access6; +#define REG_RD_ADDR_pio_rw_io_access6 24 +#define REG_WR_ADDR_pio_rw_io_access6 24 + +/* Register rw_io_access7, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_pio_rw_io_access7; +#define REG_RD_ADDR_pio_rw_io_access7 28 +#define REG_WR_ADDR_pio_rw_io_access7 28 + +/* Register rw_io_access8, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_pio_rw_io_access8; +#define REG_RD_ADDR_pio_rw_io_access8 32 +#define REG_WR_ADDR_pio_rw_io_access8 32 + +/* Register rw_io_access9, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_pio_rw_io_access9; +#define REG_RD_ADDR_pio_rw_io_access9 36 +#define REG_WR_ADDR_pio_rw_io_access9 36 + +/* Register rw_io_access10, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_pio_rw_io_access10; +#define REG_RD_ADDR_pio_rw_io_access10 40 +#define REG_WR_ADDR_pio_rw_io_access10 40 + +/* Register rw_io_access11, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_pio_rw_io_access11; +#define REG_RD_ADDR_pio_rw_io_access11 44 +#define REG_WR_ADDR_pio_rw_io_access11 44 + +/* Register rw_io_access12, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_pio_rw_io_access12; +#define REG_RD_ADDR_pio_rw_io_access12 48 +#define REG_WR_ADDR_pio_rw_io_access12 48 + +/* Register rw_io_access13, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_pio_rw_io_access13; +#define REG_RD_ADDR_pio_rw_io_access13 52 +#define REG_WR_ADDR_pio_rw_io_access13 52 + +/* Register rw_io_access14, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_pio_rw_io_access14; +#define REG_RD_ADDR_pio_rw_io_access14 56 +#define REG_WR_ADDR_pio_rw_io_access14 56 + +/* Register rw_io_access15, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_pio_rw_io_access15; +#define REG_RD_ADDR_pio_rw_io_access15 60 +#define REG_WR_ADDR_pio_rw_io_access15 60 + +/* Register rw_ce0_cfg, scope pio, type rw */ +typedef struct { + unsigned int lw : 6; + unsigned int ew : 3; + unsigned int zw : 3; + unsigned int aw : 2; + unsigned int mode : 2; + unsigned int dummy1 : 16; +} reg_pio_rw_ce0_cfg; +#define REG_RD_ADDR_pio_rw_ce0_cfg 68 +#define REG_WR_ADDR_pio_rw_ce0_cfg 68 + +/* Register rw_ce1_cfg, scope pio, type rw */ +typedef struct { + unsigned int lw : 6; + unsigned int ew : 3; + unsigned int zw : 3; + unsigned int aw : 2; + unsigned int mode : 2; + unsigned int dummy1 : 16; +} reg_pio_rw_ce1_cfg; +#define REG_RD_ADDR_pio_rw_ce1_cfg 72 +#define REG_WR_ADDR_pio_rw_ce1_cfg 72 + +/* Register rw_ce2_cfg, scope pio, type rw */ +typedef struct { + unsigned int lw : 6; + unsigned int ew : 3; + unsigned int zw : 3; + unsigned int aw : 2; + unsigned int mode : 2; + unsigned int dummy1 : 16; +} reg_pio_rw_ce2_cfg; +#define REG_RD_ADDR_pio_rw_ce2_cfg 76 +#define REG_WR_ADDR_pio_rw_ce2_cfg 76 + +/* Register rw_dout, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int rd_n : 1; + unsigned int wr_n : 1; + unsigned int a0 : 1; + unsigned int a1 : 1; + unsigned int ce0_n : 1; + unsigned int ce1_n : 1; + unsigned int ce2_n : 1; + unsigned int rdy : 1; + unsigned int dummy1 : 16; +} reg_pio_rw_dout; +#define REG_RD_ADDR_pio_rw_dout 80 +#define REG_WR_ADDR_pio_rw_dout 80 + +/* Register rw_oe, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int rd_n : 1; + unsigned int wr_n : 1; + unsigned int a0 : 1; + unsigned int a1 : 1; + unsigned int ce0_n : 1; + unsigned int ce1_n : 1; + unsigned int ce2_n : 1; + unsigned int rdy : 1; + unsigned int dummy1 : 16; +} reg_pio_rw_oe; +#define REG_RD_ADDR_pio_rw_oe 84 +#define REG_WR_ADDR_pio_rw_oe 84 + +/* Register rw_man_ctrl, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int rd_n : 1; + unsigned int wr_n : 1; + unsigned int a0 : 1; + unsigned int a1 : 1; + unsigned int ce0_n : 1; + unsigned int ce1_n : 1; + unsigned int ce2_n : 1; + unsigned int rdy : 1; + unsigned int dummy1 : 16; +} reg_pio_rw_man_ctrl; +#define REG_RD_ADDR_pio_rw_man_ctrl 88 +#define REG_WR_ADDR_pio_rw_man_ctrl 88 + +/* Register r_din, scope pio, type r */ +typedef struct { + unsigned int data : 8; + unsigned int rd_n : 1; + unsigned int wr_n : 1; + unsigned int a0 : 1; + unsigned int a1 : 1; + unsigned int ce0_n : 1; + unsigned int ce1_n : 1; + unsigned int ce2_n : 1; + unsigned int rdy : 1; + unsigned int dummy1 : 16; +} reg_pio_r_din; +#define REG_RD_ADDR_pio_r_din 92 + +/* Register r_stat, scope pio, type r */ +typedef struct { + unsigned int busy : 1; + unsigned int dummy1 : 31; +} reg_pio_r_stat; +#define REG_RD_ADDR_pio_r_stat 96 + +/* Register rw_intr_mask, scope pio, type rw */ +typedef struct { + unsigned int rdy : 1; + unsigned int dummy1 : 31; +} reg_pio_rw_intr_mask; +#define REG_RD_ADDR_pio_rw_intr_mask 100 +#define REG_WR_ADDR_pio_rw_intr_mask 100 + +/* Register rw_ack_intr, scope pio, type rw */ +typedef struct { + unsigned int rdy : 1; + unsigned int dummy1 : 31; +} reg_pio_rw_ack_intr; +#define REG_RD_ADDR_pio_rw_ack_intr 104 +#define REG_WR_ADDR_pio_rw_ack_intr 104 + +/* Register r_intr, scope pio, type r */ +typedef struct { + unsigned int rdy : 1; + unsigned int dummy1 : 31; +} reg_pio_r_intr; +#define REG_RD_ADDR_pio_r_intr 108 + +/* Register r_masked_intr, scope pio, type r */ +typedef struct { + unsigned int rdy : 1; + unsigned int dummy1 : 31; +} reg_pio_r_masked_intr; +#define REG_RD_ADDR_pio_r_masked_intr 112 + + +/* Constants */ +enum { + regk_pio_a2 = 0x00000003, + regk_pio_no = 0x00000000, + regk_pio_normal = 0x00000000, + regk_pio_rd = 0x00000001, + regk_pio_rw_ce0_cfg_default = 0x00000000, + regk_pio_rw_ce1_cfg_default = 0x00000000, + regk_pio_rw_ce2_cfg_default = 0x00000000, + regk_pio_rw_intr_mask_default = 0x00000000, + regk_pio_rw_man_ctrl_default = 0x00000000, + regk_pio_rw_oe_default = 0x00000000, + regk_pio_wr = 0x00000002, + regk_pio_wr_ce2 = 0x00000003, + regk_pio_yes = 0x00000001, + regk_pio_yes_all = 0x000000ff +}; +#endif /* __pio_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/reg_map.h b/include/asm-cris/arch-v32/mach-a3/hwregs/reg_map.h new file mode 100644 index 000000000000..36e59d6e96b6 --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/reg_map.h @@ -0,0 +1,103 @@ +#ifndef __reg_map_h +#define __reg_map_h + +/* + * This file is autogenerated from + * file: reg.rmap + * + * by ../../../tools/rdesc/bin/rdes2c -base 0xb0000000 -map marb_bar.r marb_foo.r ccd_top.r ccd_stat.r ccd_tg.r ccd_dp.r ccd.r iop_sap_in.r iop_sap_out.r iop_sw_cfg.r iop_sw_cpu.r iop_sw_mpu.r iop_sw_spu.r iop_version.r iop_crc_par.r iop_dmc_in.r iop_dmc_out.r iop_fifo_in_extra.r iop_fifo_in.r iop_fifo_out_extra.r iop_fifo_out.r iop_mc.r iop_mpu.r iop_scrc_in.r iop_scrc_out.r iop_spu.r iop_timer_grp.r iop_trigger_grp.r iop.r -outfile reg_map.h reg.rmap + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +typedef enum { + regi_ccd = 0xb0000000, + regi_ccd_top = 0xb0000000, + regi_ccd_dp = 0xb0000400, + regi_ccd_stat = 0xb0000800, + regi_ccd_tg = 0xb0001000, + regi_cfg = 0xb0002000, + regi_clkgen = 0xb0004000, + regi_ddr2_ctrl = 0xb0006000, + regi_dma0 = 0xb0008000, + regi_dma1 = 0xb000a000, + regi_dma11 = 0xb000c000, + regi_dma2 = 0xb000e000, + regi_dma3 = 0xb0010000, + regi_dma4 = 0xb0012000, + regi_dma5 = 0xb0014000, + regi_dma6 = 0xb0016000, + regi_dma7 = 0xb0018000, + regi_dma9 = 0xb001a000, + regi_eth = 0xb001c000, + regi_gio = 0xb0020000, + regi_h264 = 0xb0022000, + regi_hist = 0xb0026000, + regi_iop = 0xb0028000, + regi_iop_version = 0xb0028000, + regi_iop_fifo_in_extra = 0xb0028040, + regi_iop_fifo_out_extra = 0xb0028080, + regi_iop_trigger_grp0 = 0xb00280c0, + regi_iop_trigger_grp1 = 0xb0028100, + regi_iop_trigger_grp2 = 0xb0028140, + regi_iop_trigger_grp3 = 0xb0028180, + regi_iop_trigger_grp4 = 0xb00281c0, + regi_iop_trigger_grp5 = 0xb0028200, + regi_iop_trigger_grp6 = 0xb0028240, + regi_iop_trigger_grp7 = 0xb0028280, + regi_iop_crc_par = 0xb0028300, + regi_iop_dmc_in = 0xb0028380, + regi_iop_dmc_out = 0xb0028400, + regi_iop_fifo_in = 0xb0028480, + regi_iop_fifo_out = 0xb0028500, + regi_iop_scrc_in = 0xb0028580, + regi_iop_scrc_out = 0xb0028600, + regi_iop_timer_grp0 = 0xb0028680, + regi_iop_timer_grp1 = 0xb0028700, + regi_iop_sap_in = 0xb0028800, + regi_iop_sap_out = 0xb0028900, + regi_iop_spu = 0xb0028a00, + regi_iop_sw_cfg = 0xb0028b00, + regi_iop_sw_cpu = 0xb0028c00, + regi_iop_sw_mpu = 0xb0028d00, + regi_iop_sw_spu = 0xb0028e00, + regi_iop_mpu = 0xb0029000, + regi_irq = 0xb002a000, + regi_irq2 = 0xb006a000, + regi_jpeg = 0xb002c000, + regi_l2cache = 0xb0030000, + regi_marb_bar = 0xb0032000, + regi_marb_bar_bp0 = 0xb0032140, + regi_marb_bar_bp1 = 0xb0032180, + regi_marb_bar_bp2 = 0xb00321c0, + regi_marb_bar_bp3 = 0xb0032200, + regi_marb_foo = 0xb0034000, + regi_marb_foo_bp0 = 0xb0034280, + regi_marb_foo_bp1 = 0xb00342c0, + regi_marb_foo_bp2 = 0xb0034300, + regi_marb_foo_bp3 = 0xb0034340, + regi_pinmux = 0xb0038000, + regi_pio = 0xb0036000, + regi_sclr = 0xb003a000, + regi_sclr_fifo = 0xb003c000, + regi_ser0 = 0xb003e000, + regi_ser1 = 0xb0040000, + regi_ser2 = 0xb0042000, + regi_ser3 = 0xb0044000, + regi_ser4 = 0xb0046000, + regi_sser = 0xb0048000, + regi_strcop = 0xb004a000, + regi_strdma0 = 0xb004e000, + regi_strdma1 = 0xb0050000, + regi_strdma2 = 0xb0052000, + regi_strdma3 = 0xb0054000, + regi_strdma5 = 0xb0056000, + regi_strmux = 0xb004c000, + regi_timer0 = 0xb0058000, + regi_timer1 = 0xb005a000, + regi_timer2 = 0xb006e000, + regi_trace = 0xb005c000, + regi_vin = 0xb005e000, + regi_vout = 0xb0060000 +} reg_scope_instances; +#endif /* __reg_map_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/strmux_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/strmux_defs.h new file mode 100644 index 000000000000..14f718a4ecc3 --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/strmux_defs.h @@ -0,0 +1,120 @@ +#ifndef __strmux_defs_h +#define __strmux_defs_h + +/* + * This file is autogenerated from + * file: strmux.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile strmux_defs.h strmux.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope strmux */ + +/* Register rw_cfg, scope strmux, type rw */ +typedef struct { + unsigned int dma0 : 2; + unsigned int dma1 : 2; + unsigned int dma2 : 2; + unsigned int dma3 : 2; + unsigned int dma4 : 2; + unsigned int dma5 : 2; + unsigned int dma6 : 2; + unsigned int dma7 : 2; + unsigned int dummy1 : 2; + unsigned int dma9 : 2; + unsigned int dummy2 : 2; + unsigned int dma11 : 2; + unsigned int dummy3 : 8; +} reg_strmux_rw_cfg; +#define REG_RD_ADDR_strmux_rw_cfg 0 +#define REG_WR_ADDR_strmux_rw_cfg 0 + + +/* Constants */ +enum { + regk_strmux_eth = 0x00000001, + regk_strmux_h264 = 0x00000001, + regk_strmux_iop = 0x00000001, + regk_strmux_jpeg = 0x00000001, + regk_strmux_off = 0x00000000, + regk_strmux_rw_cfg_default = 0x00000000, + regk_strmux_ser0 = 0x00000002, + regk_strmux_ser1 = 0x00000002, + regk_strmux_ser2 = 0x00000002, + regk_strmux_ser3 = 0x00000002, + regk_strmux_ser4 = 0x00000002, + regk_strmux_sser = 0x00000001, + regk_strmux_strcop = 0x00000001 +}; +#endif /* __strmux_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/timer_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/timer_defs.h new file mode 100644 index 000000000000..2c33e097d60a --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/hwregs/timer_defs.h @@ -0,0 +1,265 @@ +#ifndef __timer_defs_h +#define __timer_defs_h + +/* + * This file is autogenerated from + * file: timer.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile timer_defs.h timer.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope timer */ + +/* Register rw_tmr0_div, scope timer, type rw */ +typedef unsigned int reg_timer_rw_tmr0_div; +#define REG_RD_ADDR_timer_rw_tmr0_div 0 +#define REG_WR_ADDR_timer_rw_tmr0_div 0 + +/* Register r_tmr0_data, scope timer, type r */ +typedef unsigned int reg_timer_r_tmr0_data; +#define REG_RD_ADDR_timer_r_tmr0_data 4 + +/* Register rw_tmr0_ctrl, scope timer, type rw */ +typedef struct { + unsigned int op : 2; + unsigned int freq : 3; + unsigned int dummy1 : 27; +} reg_timer_rw_tmr0_ctrl; +#define REG_RD_ADDR_timer_rw_tmr0_ctrl 8 +#define REG_WR_ADDR_timer_rw_tmr0_ctrl 8 + +/* Register rw_tmr1_div, scope timer, type rw */ +typedef unsigned int reg_timer_rw_tmr1_div; +#define REG_RD_ADDR_timer_rw_tmr1_div 16 +#define REG_WR_ADDR_timer_rw_tmr1_div 16 + +/* Register r_tmr1_data, scope timer, type r */ +typedef unsigned int reg_timer_r_tmr1_data; +#define REG_RD_ADDR_timer_r_tmr1_data 20 + +/* Register rw_tmr1_ctrl, scope timer, type rw */ +typedef struct { + unsigned int op : 2; + unsigned int freq : 3; + unsigned int dummy1 : 27; +} reg_timer_rw_tmr1_ctrl; +#define REG_RD_ADDR_timer_rw_tmr1_ctrl 24 +#define REG_WR_ADDR_timer_rw_tmr1_ctrl 24 + +/* Register rs_cnt_data, scope timer, type rs */ +typedef struct { + unsigned int tmr : 24; + unsigned int cnt : 8; +} reg_timer_rs_cnt_data; +#define REG_RD_ADDR_timer_rs_cnt_data 32 + +/* Register r_cnt_data, scope timer, type r */ +typedef struct { + unsigned int tmr : 24; + unsigned int cnt : 8; +} reg_timer_r_cnt_data; +#define REG_RD_ADDR_timer_r_cnt_data 36 + +/* Register rw_cnt_cfg, scope timer, type rw */ +typedef struct { + unsigned int clk : 2; + unsigned int dummy1 : 30; +} reg_timer_rw_cnt_cfg; +#define REG_RD_ADDR_timer_rw_cnt_cfg 40 +#define REG_WR_ADDR_timer_rw_cnt_cfg 40 + +/* Register rw_trig, scope timer, type rw */ +typedef unsigned int reg_timer_rw_trig; +#define REG_RD_ADDR_timer_rw_trig 48 +#define REG_WR_ADDR_timer_rw_trig 48 + +/* Register rw_trig_cfg, scope timer, type rw */ +typedef struct { + unsigned int tmr : 2; + unsigned int dummy1 : 30; +} reg_timer_rw_trig_cfg; +#define REG_RD_ADDR_timer_rw_trig_cfg 52 +#define REG_WR_ADDR_timer_rw_trig_cfg 52 + +/* Register r_time, scope timer, type r */ +typedef unsigned int reg_timer_r_time; +#define REG_RD_ADDR_timer_r_time 56 + +/* Register rw_out, scope timer, type rw */ +typedef struct { + unsigned int tmr : 2; + unsigned int dummy1 : 30; +} reg_timer_rw_out; +#define REG_RD_ADDR_timer_rw_out 60 +#define REG_WR_ADDR_timer_rw_out 60 + +/* Register rw_wd_ctrl, scope timer, type rw */ +typedef struct { + unsigned int cnt : 8; + unsigned int cmd : 1; + unsigned int key : 7; + unsigned int dummy1 : 16; +} reg_timer_rw_wd_ctrl; +#define REG_RD_ADDR_timer_rw_wd_ctrl 64 +#define REG_WR_ADDR_timer_rw_wd_ctrl 64 + +/* Register r_wd_stat, scope timer, type r */ +typedef struct { + unsigned int cnt : 8; + unsigned int cmd : 1; + unsigned int dummy1 : 23; +} reg_timer_r_wd_stat; +#define REG_RD_ADDR_timer_r_wd_stat 68 + +/* Register rw_intr_mask, scope timer, type rw */ +typedef struct { + unsigned int tmr0 : 1; + unsigned int tmr1 : 1; + unsigned int cnt : 1; + unsigned int trig : 1; + unsigned int dummy1 : 28; +} reg_timer_rw_intr_mask; +#define REG_RD_ADDR_timer_rw_intr_mask 72 +#define REG_WR_ADDR_timer_rw_intr_mask 72 + +/* Register rw_ack_intr, scope timer, type rw */ +typedef struct { + unsigned int tmr0 : 1; + unsigned int tmr1 : 1; + unsigned int cnt : 1; + unsigned int trig : 1; + unsigned int dummy1 : 28; +} reg_timer_rw_ack_intr; +#define REG_RD_ADDR_timer_rw_ack_intr 76 +#define REG_WR_ADDR_timer_rw_ack_intr 76 + +/* Register r_intr, scope timer, type r */ +typedef struct { + unsigned int tmr0 : 1; + unsigned int tmr1 : 1; + unsigned int cnt : 1; + unsigned int trig : 1; + unsigned int dummy1 : 28; +} reg_timer_r_intr; +#define REG_RD_ADDR_timer_r_intr 80 + +/* Register r_masked_intr, scope timer, type r */ +typedef struct { + unsigned int tmr0 : 1; + unsigned int tmr1 : 1; + unsigned int cnt : 1; + unsigned int trig : 1; + unsigned int dummy1 : 28; +} reg_timer_r_masked_intr; +#define REG_RD_ADDR_timer_r_masked_intr 84 + +/* Register rw_test, scope timer, type rw */ +typedef struct { + unsigned int dis : 1; + unsigned int en : 1; + unsigned int dummy1 : 30; +} reg_timer_rw_test; +#define REG_RD_ADDR_timer_rw_test 88 +#define REG_WR_ADDR_timer_rw_test 88 + + +/* Constants */ +enum { + regk_timer_ext = 0x00000001, + regk_timer_f100 = 0x00000007, + regk_timer_f29_493 = 0x00000004, + regk_timer_f32 = 0x00000005, + regk_timer_f32_768 = 0x00000006, + regk_timer_f90 = 0x00000003, + regk_timer_hold = 0x00000001, + regk_timer_ld = 0x00000000, + regk_timer_no = 0x00000000, + regk_timer_off = 0x00000000, + regk_timer_run = 0x00000002, + regk_timer_rw_cnt_cfg_default = 0x00000000, + regk_timer_rw_intr_mask_default = 0x00000000, + regk_timer_rw_out_default = 0x00000000, + regk_timer_rw_test_default = 0x00000000, + regk_timer_rw_tmr0_ctrl_default = 0x00000000, + regk_timer_rw_tmr1_ctrl_default = 0x00000000, + regk_timer_rw_trig_cfg_default = 0x00000000, + regk_timer_start = 0x00000001, + regk_timer_stop = 0x00000000, + regk_timer_time = 0x00000001, + regk_timer_tmr0 = 0x00000002, + regk_timer_tmr1 = 0x00000003, + regk_timer_vclk = 0x00000002, + regk_timer_yes = 0x00000001 +}; +#endif /* __timer_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/memmap.h b/include/asm-cris/arch-v32/mach-a3/memmap.h new file mode 100644 index 000000000000..7e15c9eb4e49 --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/memmap.h @@ -0,0 +1,10 @@ +#ifndef _ASM_ARCH_MEMMAP_H +#define _ASM_ARCH_MEMMAP_H + +#define MEM_INTMEM_START (0x38000000) +#define MEM_INTMEM_SIZE (0x00018000) +#define MEM_DRAM_START (0x40000000) + +#define MEM_NON_CACHEABLE (0x80000000) + +#endif diff --git a/include/asm-cris/arch-v32/mach-a3/pinmux.h b/include/asm-cris/arch-v32/mach-a3/pinmux.h new file mode 100644 index 000000000000..db42a7254584 --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/pinmux.h @@ -0,0 +1,45 @@ +#ifndef _ASM_CRIS_ARCH_PINMUX_H +#define _ASM_CRIS_ARCH_PINMUX_H + +#define PORT_A 0 +#define PORT_B 1 +#define PORT_C 2 + +enum pin_mode { + pinmux_none = 0, + pinmux_fixed, + pinmux_gpio, + pinmux_iop +}; + +enum fixed_function { + pinmux_eth, + pinmux_geth, + pinmux_tg_ccd, + pinmux_tg_cmos, + pinmux_vout, + pinmux_ser1, + pinmux_ser2, + pinmux_ser3, + pinmux_ser4, + pinmux_sser, + pinmux_pio, + pinmux_pwm0, + pinmux_pwm1, + pinmux_pwm2, + pinmux_i2c0, + pinmux_i2c1, + pinmux_i2c1_3wire, + pinmux_i2c1_sda1, + pinmux_i2c1_sda2, + pinmux_i2c1_sda3, +}; + +int crisv32_pinmux_init(void); +int crisv32_pinmux_alloc(int port, int first_pin, int last_pin, enum pin_mode); +int crisv32_pinmux_alloc_fixed(enum fixed_function function); +int crisv32_pinmux_dealloc(int port, int first_pin, int last_pin); +int crisv32_pinmux_dealloc_fixed(enum fixed_function function); +void crisv32_pinmux_dump(void); + +#endif diff --git a/include/asm-cris/arch-v32/mach-a3/startup.inc b/include/asm-cris/arch-v32/mach-a3/startup.inc new file mode 100644 index 000000000000..2f23e5e16f4a --- /dev/null +++ b/include/asm-cris/arch-v32/mach-a3/startup.inc @@ -0,0 +1,60 @@ +#include <hwregs/asm/reg_map_asm.h> +#include <hwregs/asm/gio_defs_asm.h> +#include <hwregs/asm/pio_defs_asm.h> +#include <hwregs/asm/clkgen_defs_asm.h> +#include <hwregs/asm/pinmux_defs_asm.h> + + .macro GIO_INIT + move.d CONFIG_ETRAX_DEF_GIO_PA_OUT, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pa_dout), $r1 + move.d $r0, [$r1] + + move.d CONFIG_ETRAX_DEF_GIO_PA_OE, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pa_oe), $r1 + move.d $r0, [$r1] + + move.d CONFIG_ETRAX_DEF_GIO_PB_OUT, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pb_dout), $r1 + move.d $r0, [$r1] + + move.d CONFIG_ETRAX_DEF_GIO_PB_OE, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pb_oe), $r1 + move.d $r0, [$r1] + + move.d CONFIG_ETRAX_DEF_GIO_PC_OUT, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pc_dout), $r1 + move.d $r0, [$r1] + + move.d CONFIG_ETRAX_DEF_GIO_PC_OE, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pc_oe), $r1 + move.d $r0, [$r1] + + move.d 0xFFFFFFFF, $r0 + move.d REG_ADDR(pinmux, regi_pinmux, rw_gio_pa), $r1 + move.d $r0, [$r1] + move.d REG_ADDR(pinmux, regi_pinmux, rw_gio_pb), $r1 + move.d $r0, [$r1] + move.d REG_ADDR(pinmux, regi_pinmux, rw_gio_pc), $r1 + move.d $r0, [$r1] + .endm + + .macro START_CLOCKS + move.d REG_ADDR(clkgen, regi_clkgen, rw_clk_ctrl), $r1 + move.d [$r1], $r0 + or.d REG_STATE(clkgen, rw_clk_ctrl, cpu, yes) | \ + REG_STATE(clkgen, rw_clk_ctrl, ddr2, yes) | \ + REG_STATE(clkgen, rw_clk_ctrl, memarb_bar_ddr, yes), $r0 + move.d $r0, [$r1] + .endm + + .macro SETUP_WAIT_STATES + move.d REG_ADDR(pio, regi_pio, rw_ce0_cfg), $r0 + move.d CONFIG_ETRAX_PIO_CE0_CFG, $r1 + move.d $r1, [$r0] + move.d REG_ADDR(pio, regi_pio, rw_ce1_cfg), $r0 + move.d CONFIG_ETRAX_PIO_CE1_CFG, $r1 + move.d $r1, [$r0] + move.d REG_ADDR(pio, regi_pio, rw_ce2_cfg), $r0 + move.d CONFIG_ETRAX_PIO_CE2_CFG, $r1 + move.d $r1, [$r0] + .endm diff --git a/include/asm-cris/arch-v32/mach-fs/arbiter.h b/include/asm-cris/arch-v32/mach-fs/arbiter.h new file mode 100644 index 000000000000..a2e0ec8faa7d --- /dev/null +++ b/include/asm-cris/arch-v32/mach-fs/arbiter.h @@ -0,0 +1,28 @@ +#ifndef _ASM_CRIS_ARCH_ARBITER_H +#define _ASM_CRIS_ARCH_ARBITER_H + +#define EXT_REGION 0 +#define INT_REGION 1 + +typedef void (watch_callback)(void); + +enum { + arbiter_all_dmas = 0x3ff, + arbiter_cpu = 0xc00, + arbiter_all_clients = 0x3fff +}; + +enum { + arbiter_all_read = 0x55, + arbiter_all_write = 0xaa, + arbiter_all_accesses = 0xff +}; + +int crisv32_arbiter_allocate_bandwidth(int client, int region, + unsigned long bandwidth); +int crisv32_arbiter_watch(unsigned long start, unsigned long size, + unsigned long clients, unsigned long accesses, + watch_callback * cb); +int crisv32_arbiter_unwatch(int id); + +#endif diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/asm/bif_core_defs_asm.h b/include/asm-cris/arch-v32/mach-fs/hwregs/asm/bif_core_defs_asm.h new file mode 100644 index 000000000000..0a409c92837e --- /dev/null +++ b/include/asm-cris/arch-v32/mach-fs/hwregs/asm/bif_core_defs_asm.h @@ -0,0 +1,319 @@ +#ifndef __bif_core_defs_asm_h +#define __bif_core_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/bif/rtl/bif_core_regs.r + * id: bif_core_regs.r,v 1.17 2005/02/04 13:28:22 np Exp + * last modfied: Mon Apr 11 16:06:33 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/bif_core_defs_asm.h ../../inst/bif/rtl/bif_core_regs.r + * id: $Id: bif_core_defs_asm.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_grp1_cfg, scope bif_core, type rw */ +#define reg_bif_core_rw_grp1_cfg___lw___lsb 0 +#define reg_bif_core_rw_grp1_cfg___lw___width 6 +#define reg_bif_core_rw_grp1_cfg___ew___lsb 6 +#define reg_bif_core_rw_grp1_cfg___ew___width 3 +#define reg_bif_core_rw_grp1_cfg___zw___lsb 9 +#define reg_bif_core_rw_grp1_cfg___zw___width 3 +#define reg_bif_core_rw_grp1_cfg___aw___lsb 12 +#define reg_bif_core_rw_grp1_cfg___aw___width 2 +#define reg_bif_core_rw_grp1_cfg___dw___lsb 14 +#define reg_bif_core_rw_grp1_cfg___dw___width 2 +#define reg_bif_core_rw_grp1_cfg___ewb___lsb 16 +#define reg_bif_core_rw_grp1_cfg___ewb___width 2 +#define reg_bif_core_rw_grp1_cfg___bw___lsb 18 +#define reg_bif_core_rw_grp1_cfg___bw___width 1 +#define reg_bif_core_rw_grp1_cfg___bw___bit 18 +#define reg_bif_core_rw_grp1_cfg___wr_extend___lsb 19 +#define reg_bif_core_rw_grp1_cfg___wr_extend___width 1 +#define reg_bif_core_rw_grp1_cfg___wr_extend___bit 19 +#define reg_bif_core_rw_grp1_cfg___erc_en___lsb 20 +#define reg_bif_core_rw_grp1_cfg___erc_en___width 1 +#define reg_bif_core_rw_grp1_cfg___erc_en___bit 20 +#define reg_bif_core_rw_grp1_cfg___mode___lsb 21 +#define reg_bif_core_rw_grp1_cfg___mode___width 1 +#define reg_bif_core_rw_grp1_cfg___mode___bit 21 +#define reg_bif_core_rw_grp1_cfg_offset 0 + +/* Register rw_grp2_cfg, scope bif_core, type rw */ +#define reg_bif_core_rw_grp2_cfg___lw___lsb 0 +#define reg_bif_core_rw_grp2_cfg___lw___width 6 +#define reg_bif_core_rw_grp2_cfg___ew___lsb 6 +#define reg_bif_core_rw_grp2_cfg___ew___width 3 +#define reg_bif_core_rw_grp2_cfg___zw___lsb 9 +#define reg_bif_core_rw_grp2_cfg___zw___width 3 +#define reg_bif_core_rw_grp2_cfg___aw___lsb 12 +#define reg_bif_core_rw_grp2_cfg___aw___width 2 +#define reg_bif_core_rw_grp2_cfg___dw___lsb 14 +#define reg_bif_core_rw_grp2_cfg___dw___width 2 +#define reg_bif_core_rw_grp2_cfg___ewb___lsb 16 +#define reg_bif_core_rw_grp2_cfg___ewb___width 2 +#define reg_bif_core_rw_grp2_cfg___bw___lsb 18 +#define reg_bif_core_rw_grp2_cfg___bw___width 1 +#define reg_bif_core_rw_grp2_cfg___bw___bit 18 +#define reg_bif_core_rw_grp2_cfg___wr_extend___lsb 19 +#define reg_bif_core_rw_grp2_cfg___wr_extend___width 1 +#define reg_bif_core_rw_grp2_cfg___wr_extend___bit 19 +#define reg_bif_core_rw_grp2_cfg___erc_en___lsb 20 +#define reg_bif_core_rw_grp2_cfg___erc_en___width 1 +#define reg_bif_core_rw_grp2_cfg___erc_en___bit 20 +#define reg_bif_core_rw_grp2_cfg___mode___lsb 21 +#define reg_bif_core_rw_grp2_cfg___mode___width 1 +#define reg_bif_core_rw_grp2_cfg___mode___bit 21 +#define reg_bif_core_rw_grp2_cfg_offset 4 + +/* Register rw_grp3_cfg, scope bif_core, type rw */ +#define reg_bif_core_rw_grp3_cfg___lw___lsb 0 +#define reg_bif_core_rw_grp3_cfg___lw___width 6 +#define reg_bif_core_rw_grp3_cfg___ew___lsb 6 +#define reg_bif_core_rw_grp3_cfg___ew___width 3 +#define reg_bif_core_rw_grp3_cfg___zw___lsb 9 +#define reg_bif_core_rw_grp3_cfg___zw___width 3 +#define reg_bif_core_rw_grp3_cfg___aw___lsb 12 +#define reg_bif_core_rw_grp3_cfg___aw___width 2 +#define reg_bif_core_rw_grp3_cfg___dw___lsb 14 +#define reg_bif_core_rw_grp3_cfg___dw___width 2 +#define reg_bif_core_rw_grp3_cfg___ewb___lsb 16 +#define reg_bif_core_rw_grp3_cfg___ewb___width 2 +#define reg_bif_core_rw_grp3_cfg___bw___lsb 18 +#define reg_bif_core_rw_grp3_cfg___bw___width 1 +#define reg_bif_core_rw_grp3_cfg___bw___bit 18 +#define reg_bif_core_rw_grp3_cfg___wr_extend___lsb 19 +#define reg_bif_core_rw_grp3_cfg___wr_extend___width 1 +#define reg_bif_core_rw_grp3_cfg___wr_extend___bit 19 +#define reg_bif_core_rw_grp3_cfg___erc_en___lsb 20 +#define reg_bif_core_rw_grp3_cfg___erc_en___width 1 +#define reg_bif_core_rw_grp3_cfg___erc_en___bit 20 +#define reg_bif_core_rw_grp3_cfg___mode___lsb 21 +#define reg_bif_core_rw_grp3_cfg___mode___width 1 +#define reg_bif_core_rw_grp3_cfg___mode___bit 21 +#define reg_bif_core_rw_grp3_cfg___gated_csp0___lsb 24 +#define reg_bif_core_rw_grp3_cfg___gated_csp0___width 2 +#define reg_bif_core_rw_grp3_cfg___gated_csp1___lsb 26 +#define reg_bif_core_rw_grp3_cfg___gated_csp1___width 2 +#define reg_bif_core_rw_grp3_cfg___gated_csp2___lsb 28 +#define reg_bif_core_rw_grp3_cfg___gated_csp2___width 2 +#define reg_bif_core_rw_grp3_cfg___gated_csp3___lsb 30 +#define reg_bif_core_rw_grp3_cfg___gated_csp3___width 2 +#define reg_bif_core_rw_grp3_cfg_offset 8 + +/* Register rw_grp4_cfg, scope bif_core, type rw */ +#define reg_bif_core_rw_grp4_cfg___lw___lsb 0 +#define reg_bif_core_rw_grp4_cfg___lw___width 6 +#define reg_bif_core_rw_grp4_cfg___ew___lsb 6 +#define reg_bif_core_rw_grp4_cfg___ew___width 3 +#define reg_bif_core_rw_grp4_cfg___zw___lsb 9 +#define reg_bif_core_rw_grp4_cfg___zw___width 3 +#define reg_bif_core_rw_grp4_cfg___aw___lsb 12 +#define reg_bif_core_rw_grp4_cfg___aw___width 2 +#define reg_bif_core_rw_grp4_cfg___dw___lsb 14 +#define reg_bif_core_rw_grp4_cfg___dw___width 2 +#define reg_bif_core_rw_grp4_cfg___ewb___lsb 16 +#define reg_bif_core_rw_grp4_cfg___ewb___width 2 +#define reg_bif_core_rw_grp4_cfg___bw___lsb 18 +#define reg_bif_core_rw_grp4_cfg___bw___width 1 +#define reg_bif_core_rw_grp4_cfg___bw___bit 18 +#define reg_bif_core_rw_grp4_cfg___wr_extend___lsb 19 +#define reg_bif_core_rw_grp4_cfg___wr_extend___width 1 +#define reg_bif_core_rw_grp4_cfg___wr_extend___bit 19 +#define reg_bif_core_rw_grp4_cfg___erc_en___lsb 20 +#define reg_bif_core_rw_grp4_cfg___erc_en___width 1 +#define reg_bif_core_rw_grp4_cfg___erc_en___bit 20 +#define reg_bif_core_rw_grp4_cfg___mode___lsb 21 +#define reg_bif_core_rw_grp4_cfg___mode___width 1 +#define reg_bif_core_rw_grp4_cfg___mode___bit 21 +#define reg_bif_core_rw_grp4_cfg___gated_csp4___lsb 26 +#define reg_bif_core_rw_grp4_cfg___gated_csp4___width 2 +#define reg_bif_core_rw_grp4_cfg___gated_csp5___lsb 28 +#define reg_bif_core_rw_grp4_cfg___gated_csp5___width 2 +#define reg_bif_core_rw_grp4_cfg___gated_csp6___lsb 30 +#define reg_bif_core_rw_grp4_cfg___gated_csp6___width 2 +#define reg_bif_core_rw_grp4_cfg_offset 12 + +/* Register rw_sdram_cfg_grp0, scope bif_core, type rw */ +#define reg_bif_core_rw_sdram_cfg_grp0___bank_sel___lsb 0 +#define reg_bif_core_rw_sdram_cfg_grp0___bank_sel___width 5 +#define reg_bif_core_rw_sdram_cfg_grp0___ca___lsb 5 +#define reg_bif_core_rw_sdram_cfg_grp0___ca___width 3 +#define reg_bif_core_rw_sdram_cfg_grp0___type___lsb 8 +#define reg_bif_core_rw_sdram_cfg_grp0___type___width 1 +#define reg_bif_core_rw_sdram_cfg_grp0___type___bit 8 +#define reg_bif_core_rw_sdram_cfg_grp0___bw___lsb 9 +#define reg_bif_core_rw_sdram_cfg_grp0___bw___width 1 +#define reg_bif_core_rw_sdram_cfg_grp0___bw___bit 9 +#define reg_bif_core_rw_sdram_cfg_grp0___sh___lsb 10 +#define reg_bif_core_rw_sdram_cfg_grp0___sh___width 3 +#define reg_bif_core_rw_sdram_cfg_grp0___wmm___lsb 13 +#define reg_bif_core_rw_sdram_cfg_grp0___wmm___width 1 +#define reg_bif_core_rw_sdram_cfg_grp0___wmm___bit 13 +#define reg_bif_core_rw_sdram_cfg_grp0___sh16___lsb 14 +#define reg_bif_core_rw_sdram_cfg_grp0___sh16___width 1 +#define reg_bif_core_rw_sdram_cfg_grp0___sh16___bit 14 +#define reg_bif_core_rw_sdram_cfg_grp0___grp_sel___lsb 15 +#define reg_bif_core_rw_sdram_cfg_grp0___grp_sel___width 5 +#define reg_bif_core_rw_sdram_cfg_grp0_offset 16 + +/* Register rw_sdram_cfg_grp1, scope bif_core, type rw */ +#define reg_bif_core_rw_sdram_cfg_grp1___bank_sel___lsb 0 +#define reg_bif_core_rw_sdram_cfg_grp1___bank_sel___width 5 +#define reg_bif_core_rw_sdram_cfg_grp1___ca___lsb 5 +#define reg_bif_core_rw_sdram_cfg_grp1___ca___width 3 +#define reg_bif_core_rw_sdram_cfg_grp1___type___lsb 8 +#define reg_bif_core_rw_sdram_cfg_grp1___type___width 1 +#define reg_bif_core_rw_sdram_cfg_grp1___type___bit 8 +#define reg_bif_core_rw_sdram_cfg_grp1___bw___lsb 9 +#define reg_bif_core_rw_sdram_cfg_grp1___bw___width 1 +#define reg_bif_core_rw_sdram_cfg_grp1___bw___bit 9 +#define reg_bif_core_rw_sdram_cfg_grp1___sh___lsb 10 +#define reg_bif_core_rw_sdram_cfg_grp1___sh___width 3 +#define reg_bif_core_rw_sdram_cfg_grp1___wmm___lsb 13 +#define reg_bif_core_rw_sdram_cfg_grp1___wmm___width 1 +#define reg_bif_core_rw_sdram_cfg_grp1___wmm___bit 13 +#define reg_bif_core_rw_sdram_cfg_grp1___sh16___lsb 14 +#define reg_bif_core_rw_sdram_cfg_grp1___sh16___width 1 +#define reg_bif_core_rw_sdram_cfg_grp1___sh16___bit 14 +#define reg_bif_core_rw_sdram_cfg_grp1_offset 20 + +/* Register rw_sdram_timing, scope bif_core, type rw */ +#define reg_bif_core_rw_sdram_timing___cl___lsb 0 +#define reg_bif_core_rw_sdram_timing___cl___width 3 +#define reg_bif_core_rw_sdram_timing___rcd___lsb 3 +#define reg_bif_core_rw_sdram_timing___rcd___width 3 +#define reg_bif_core_rw_sdram_timing___rp___lsb 6 +#define reg_bif_core_rw_sdram_timing___rp___width 3 +#define reg_bif_core_rw_sdram_timing___rc___lsb 9 +#define reg_bif_core_rw_sdram_timing___rc___width 2 +#define reg_bif_core_rw_sdram_timing___dpl___lsb 11 +#define reg_bif_core_rw_sdram_timing___dpl___width 2 +#define reg_bif_core_rw_sdram_timing___pde___lsb 13 +#define reg_bif_core_rw_sdram_timing___pde___width 1 +#define reg_bif_core_rw_sdram_timing___pde___bit 13 +#define reg_bif_core_rw_sdram_timing___ref___lsb 14 +#define reg_bif_core_rw_sdram_timing___ref___width 2 +#define reg_bif_core_rw_sdram_timing___cpd___lsb 16 +#define reg_bif_core_rw_sdram_timing___cpd___width 1 +#define reg_bif_core_rw_sdram_timing___cpd___bit 16 +#define reg_bif_core_rw_sdram_timing___sdcke___lsb 17 +#define reg_bif_core_rw_sdram_timing___sdcke___width 1 +#define reg_bif_core_rw_sdram_timing___sdcke___bit 17 +#define reg_bif_core_rw_sdram_timing___sdclk___lsb 18 +#define reg_bif_core_rw_sdram_timing___sdclk___width 1 +#define reg_bif_core_rw_sdram_timing___sdclk___bit 18 +#define reg_bif_core_rw_sdram_timing_offset 24 + +/* Register rw_sdram_cmd, scope bif_core, type rw */ +#define reg_bif_core_rw_sdram_cmd___cmd___lsb 0 +#define reg_bif_core_rw_sdram_cmd___cmd___width 3 +#define reg_bif_core_rw_sdram_cmd___mrs_data___lsb 3 +#define reg_bif_core_rw_sdram_cmd___mrs_data___width 15 +#define reg_bif_core_rw_sdram_cmd_offset 28 + +/* Register rs_sdram_ref_stat, scope bif_core, type rs */ +#define reg_bif_core_rs_sdram_ref_stat___ok___lsb 0 +#define reg_bif_core_rs_sdram_ref_stat___ok___width 1 +#define reg_bif_core_rs_sdram_ref_stat___ok___bit 0 +#define reg_bif_core_rs_sdram_ref_stat_offset 32 + +/* Register r_sdram_ref_stat, scope bif_core, type r */ +#define reg_bif_core_r_sdram_ref_stat___ok___lsb 0 +#define reg_bif_core_r_sdram_ref_stat___ok___width 1 +#define reg_bif_core_r_sdram_ref_stat___ok___bit 0 +#define reg_bif_core_r_sdram_ref_stat_offset 36 + + +/* Constants */ +#define regk_bif_core_bank2 0x00000000 +#define regk_bif_core_bank4 0x00000001 +#define regk_bif_core_bit10 0x0000000a +#define regk_bif_core_bit11 0x0000000b +#define regk_bif_core_bit12 0x0000000c +#define regk_bif_core_bit13 0x0000000d +#define regk_bif_core_bit14 0x0000000e +#define regk_bif_core_bit15 0x0000000f +#define regk_bif_core_bit16 0x00000010 +#define regk_bif_core_bit17 0x00000011 +#define regk_bif_core_bit18 0x00000012 +#define regk_bif_core_bit19 0x00000013 +#define regk_bif_core_bit20 0x00000014 +#define regk_bif_core_bit21 0x00000015 +#define regk_bif_core_bit22 0x00000016 +#define regk_bif_core_bit23 0x00000017 +#define regk_bif_core_bit24 0x00000018 +#define regk_bif_core_bit25 0x00000019 +#define regk_bif_core_bit26 0x0000001a +#define regk_bif_core_bit27 0x0000001b +#define regk_bif_core_bit28 0x0000001c +#define regk_bif_core_bit29 0x0000001d +#define regk_bif_core_bit9 0x00000009 +#define regk_bif_core_bw16 0x00000001 +#define regk_bif_core_bw32 0x00000000 +#define regk_bif_core_bwe 0x00000000 +#define regk_bif_core_cwe 0x00000001 +#define regk_bif_core_e15us 0x00000001 +#define regk_bif_core_e7800ns 0x00000002 +#define regk_bif_core_grp0 0x00000000 +#define regk_bif_core_grp1 0x00000001 +#define regk_bif_core_mrs 0x00000003 +#define regk_bif_core_no 0x00000000 +#define regk_bif_core_none 0x00000000 +#define regk_bif_core_nop 0x00000000 +#define regk_bif_core_off 0x00000000 +#define regk_bif_core_pre 0x00000002 +#define regk_bif_core_r_sdram_ref_stat_default 0x00000001 +#define regk_bif_core_rd 0x00000002 +#define regk_bif_core_ref 0x00000001 +#define regk_bif_core_rs_sdram_ref_stat_default 0x00000001 +#define regk_bif_core_rw_grp1_cfg_default 0x000006cf +#define regk_bif_core_rw_grp2_cfg_default 0x000006cf +#define regk_bif_core_rw_grp3_cfg_default 0x000006cf +#define regk_bif_core_rw_grp4_cfg_default 0x000006cf +#define regk_bif_core_rw_sdram_cfg_grp1_default 0x00000000 +#define regk_bif_core_slf 0x00000004 +#define regk_bif_core_wr 0x00000001 +#define regk_bif_core_yes 0x00000001 +#endif /* __bif_core_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/asm/config_defs_asm.h b/include/asm-cris/arch-v32/mach-fs/hwregs/asm/config_defs_asm.h new file mode 100644 index 000000000000..a9908dfc2937 --- /dev/null +++ b/include/asm-cris/arch-v32/mach-fs/hwregs/asm/config_defs_asm.h @@ -0,0 +1,131 @@ +#ifndef __config_defs_asm_h +#define __config_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../rtl/config_regs.r + * id: config_regs.r,v 1.23 2004/03/04 11:34:42 mikaeln Exp + * last modfied: Thu Mar 4 12:34:39 2004 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/config_defs_asm.h ../../rtl/config_regs.r + * id: $Id: config_defs_asm.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register r_bootsel, scope config, type r */ +#define reg_config_r_bootsel___boot_mode___lsb 0 +#define reg_config_r_bootsel___boot_mode___width 3 +#define reg_config_r_bootsel___full_duplex___lsb 3 +#define reg_config_r_bootsel___full_duplex___width 1 +#define reg_config_r_bootsel___full_duplex___bit 3 +#define reg_config_r_bootsel___user___lsb 4 +#define reg_config_r_bootsel___user___width 1 +#define reg_config_r_bootsel___user___bit 4 +#define reg_config_r_bootsel___pll___lsb 5 +#define reg_config_r_bootsel___pll___width 1 +#define reg_config_r_bootsel___pll___bit 5 +#define reg_config_r_bootsel___flash_bw___lsb 6 +#define reg_config_r_bootsel___flash_bw___width 1 +#define reg_config_r_bootsel___flash_bw___bit 6 +#define reg_config_r_bootsel_offset 0 + +/* Register rw_clk_ctrl, scope config, type rw */ +#define reg_config_rw_clk_ctrl___pll___lsb 0 +#define reg_config_rw_clk_ctrl___pll___width 1 +#define reg_config_rw_clk_ctrl___pll___bit 0 +#define reg_config_rw_clk_ctrl___cpu___lsb 1 +#define reg_config_rw_clk_ctrl___cpu___width 1 +#define reg_config_rw_clk_ctrl___cpu___bit 1 +#define reg_config_rw_clk_ctrl___iop___lsb 2 +#define reg_config_rw_clk_ctrl___iop___width 1 +#define reg_config_rw_clk_ctrl___iop___bit 2 +#define reg_config_rw_clk_ctrl___dma01_eth0___lsb 3 +#define reg_config_rw_clk_ctrl___dma01_eth0___width 1 +#define reg_config_rw_clk_ctrl___dma01_eth0___bit 3 +#define reg_config_rw_clk_ctrl___dma23___lsb 4 +#define reg_config_rw_clk_ctrl___dma23___width 1 +#define reg_config_rw_clk_ctrl___dma23___bit 4 +#define reg_config_rw_clk_ctrl___dma45___lsb 5 +#define reg_config_rw_clk_ctrl___dma45___width 1 +#define reg_config_rw_clk_ctrl___dma45___bit 5 +#define reg_config_rw_clk_ctrl___dma67___lsb 6 +#define reg_config_rw_clk_ctrl___dma67___width 1 +#define reg_config_rw_clk_ctrl___dma67___bit 6 +#define reg_config_rw_clk_ctrl___dma89_strcop___lsb 7 +#define reg_config_rw_clk_ctrl___dma89_strcop___width 1 +#define reg_config_rw_clk_ctrl___dma89_strcop___bit 7 +#define reg_config_rw_clk_ctrl___bif___lsb 8 +#define reg_config_rw_clk_ctrl___bif___width 1 +#define reg_config_rw_clk_ctrl___bif___bit 8 +#define reg_config_rw_clk_ctrl___fix_io___lsb 9 +#define reg_config_rw_clk_ctrl___fix_io___width 1 +#define reg_config_rw_clk_ctrl___fix_io___bit 9 +#define reg_config_rw_clk_ctrl_offset 4 + +/* Register rw_pad_ctrl, scope config, type rw */ +#define reg_config_rw_pad_ctrl___usb_susp___lsb 0 +#define reg_config_rw_pad_ctrl___usb_susp___width 1 +#define reg_config_rw_pad_ctrl___usb_susp___bit 0 +#define reg_config_rw_pad_ctrl___phyrst_n___lsb 1 +#define reg_config_rw_pad_ctrl___phyrst_n___width 1 +#define reg_config_rw_pad_ctrl___phyrst_n___bit 1 +#define reg_config_rw_pad_ctrl_offset 8 + + +/* Constants */ +#define regk_config_bw16 0x00000000 +#define regk_config_bw32 0x00000001 +#define regk_config_master 0x00000005 +#define regk_config_nand 0x00000003 +#define regk_config_net_rx 0x00000001 +#define regk_config_net_tx_rx 0x00000002 +#define regk_config_no 0x00000000 +#define regk_config_none 0x00000007 +#define regk_config_nor 0x00000000 +#define regk_config_rw_clk_ctrl_default 0x00000002 +#define regk_config_rw_pad_ctrl_default 0x00000000 +#define regk_config_ser 0x00000004 +#define regk_config_slave 0x00000006 +#define regk_config_yes 0x00000001 +#endif /* __config_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/asm/gio_defs_asm.h b/include/asm-cris/arch-v32/mach-fs/hwregs/asm/gio_defs_asm.h new file mode 100644 index 000000000000..be4c63936d90 --- /dev/null +++ b/include/asm-cris/arch-v32/mach-fs/hwregs/asm/gio_defs_asm.h @@ -0,0 +1,276 @@ +#ifndef __gio_defs_asm_h +#define __gio_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/gio/rtl/gio_regs.r + * id: gio_regs.r,v 1.5 2005/02/04 09:43:21 perz Exp + * last modfied: Mon Apr 11 16:07:47 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/gio_defs_asm.h ../../inst/gio/rtl/gio_regs.r + * id: $Id: gio_defs_asm.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_pa_dout, scope gio, type rw */ +#define reg_gio_rw_pa_dout___data___lsb 0 +#define reg_gio_rw_pa_dout___data___width 8 +#define reg_gio_rw_pa_dout_offset 0 + +/* Register r_pa_din, scope gio, type r */ +#define reg_gio_r_pa_din___data___lsb 0 +#define reg_gio_r_pa_din___data___width 8 +#define reg_gio_r_pa_din_offset 4 + +/* Register rw_pa_oe, scope gio, type rw */ +#define reg_gio_rw_pa_oe___oe___lsb 0 +#define reg_gio_rw_pa_oe___oe___width 8 +#define reg_gio_rw_pa_oe_offset 8 + +/* Register rw_intr_cfg, scope gio, type rw */ +#define reg_gio_rw_intr_cfg___pa0___lsb 0 +#define reg_gio_rw_intr_cfg___pa0___width 3 +#define reg_gio_rw_intr_cfg___pa1___lsb 3 +#define reg_gio_rw_intr_cfg___pa1___width 3 +#define reg_gio_rw_intr_cfg___pa2___lsb 6 +#define reg_gio_rw_intr_cfg___pa2___width 3 +#define reg_gio_rw_intr_cfg___pa3___lsb 9 +#define reg_gio_rw_intr_cfg___pa3___width 3 +#define reg_gio_rw_intr_cfg___pa4___lsb 12 +#define reg_gio_rw_intr_cfg___pa4___width 3 +#define reg_gio_rw_intr_cfg___pa5___lsb 15 +#define reg_gio_rw_intr_cfg___pa5___width 3 +#define reg_gio_rw_intr_cfg___pa6___lsb 18 +#define reg_gio_rw_intr_cfg___pa6___width 3 +#define reg_gio_rw_intr_cfg___pa7___lsb 21 +#define reg_gio_rw_intr_cfg___pa7___width 3 +#define reg_gio_rw_intr_cfg_offset 12 + +/* Register rw_intr_mask, scope gio, type rw */ +#define reg_gio_rw_intr_mask___pa0___lsb 0 +#define reg_gio_rw_intr_mask___pa0___width 1 +#define reg_gio_rw_intr_mask___pa0___bit 0 +#define reg_gio_rw_intr_mask___pa1___lsb 1 +#define reg_gio_rw_intr_mask___pa1___width 1 +#define reg_gio_rw_intr_mask___pa1___bit 1 +#define reg_gio_rw_intr_mask___pa2___lsb 2 +#define reg_gio_rw_intr_mask___pa2___width 1 +#define reg_gio_rw_intr_mask___pa2___bit 2 +#define reg_gio_rw_intr_mask___pa3___lsb 3 +#define reg_gio_rw_intr_mask___pa3___width 1 +#define reg_gio_rw_intr_mask___pa3___bit 3 +#define reg_gio_rw_intr_mask___pa4___lsb 4 +#define reg_gio_rw_intr_mask___pa4___width 1 +#define reg_gio_rw_intr_mask___pa4___bit 4 +#define reg_gio_rw_intr_mask___pa5___lsb 5 +#define reg_gio_rw_intr_mask___pa5___width 1 +#define reg_gio_rw_intr_mask___pa5___bit 5 +#define reg_gio_rw_intr_mask___pa6___lsb 6 +#define reg_gio_rw_intr_mask___pa6___width 1 +#define reg_gio_rw_intr_mask___pa6___bit 6 +#define reg_gio_rw_intr_mask___pa7___lsb 7 +#define reg_gio_rw_intr_mask___pa7___width 1 +#define reg_gio_rw_intr_mask___pa7___bit 7 +#define reg_gio_rw_intr_mask_offset 16 + +/* Register rw_ack_intr, scope gio, type rw */ +#define reg_gio_rw_ack_intr___pa0___lsb 0 +#define reg_gio_rw_ack_intr___pa0___width 1 +#define reg_gio_rw_ack_intr___pa0___bit 0 +#define reg_gio_rw_ack_intr___pa1___lsb 1 +#define reg_gio_rw_ack_intr___pa1___width 1 +#define reg_gio_rw_ack_intr___pa1___bit 1 +#define reg_gio_rw_ack_intr___pa2___lsb 2 +#define reg_gio_rw_ack_intr___pa2___width 1 +#define reg_gio_rw_ack_intr___pa2___bit 2 +#define reg_gio_rw_ack_intr___pa3___lsb 3 +#define reg_gio_rw_ack_intr___pa3___width 1 +#define reg_gio_rw_ack_intr___pa3___bit 3 +#define reg_gio_rw_ack_intr___pa4___lsb 4 +#define reg_gio_rw_ack_intr___pa4___width 1 +#define reg_gio_rw_ack_intr___pa4___bit 4 +#define reg_gio_rw_ack_intr___pa5___lsb 5 +#define reg_gio_rw_ack_intr___pa5___width 1 +#define reg_gio_rw_ack_intr___pa5___bit 5 +#define reg_gio_rw_ack_intr___pa6___lsb 6 +#define reg_gio_rw_ack_intr___pa6___width 1 +#define reg_gio_rw_ack_intr___pa6___bit 6 +#define reg_gio_rw_ack_intr___pa7___lsb 7 +#define reg_gio_rw_ack_intr___pa7___width 1 +#define reg_gio_rw_ack_intr___pa7___bit 7 +#define reg_gio_rw_ack_intr_offset 20 + +/* Register r_intr, scope gio, type r */ +#define reg_gio_r_intr___pa0___lsb 0 +#define reg_gio_r_intr___pa0___width 1 +#define reg_gio_r_intr___pa0___bit 0 +#define reg_gio_r_intr___pa1___lsb 1 +#define reg_gio_r_intr___pa1___width 1 +#define reg_gio_r_intr___pa1___bit 1 +#define reg_gio_r_intr___pa2___lsb 2 +#define reg_gio_r_intr___pa2___width 1 +#define reg_gio_r_intr___pa2___bit 2 +#define reg_gio_r_intr___pa3___lsb 3 +#define reg_gio_r_intr___pa3___width 1 +#define reg_gio_r_intr___pa3___bit 3 +#define reg_gio_r_intr___pa4___lsb 4 +#define reg_gio_r_intr___pa4___width 1 +#define reg_gio_r_intr___pa4___bit 4 +#define reg_gio_r_intr___pa5___lsb 5 +#define reg_gio_r_intr___pa5___width 1 +#define reg_gio_r_intr___pa5___bit 5 +#define reg_gio_r_intr___pa6___lsb 6 +#define reg_gio_r_intr___pa6___width 1 +#define reg_gio_r_intr___pa6___bit 6 +#define reg_gio_r_intr___pa7___lsb 7 +#define reg_gio_r_intr___pa7___width 1 +#define reg_gio_r_intr___pa7___bit 7 +#define reg_gio_r_intr_offset 24 + +/* Register r_masked_intr, scope gio, type r */ +#define reg_gio_r_masked_intr___pa0___lsb 0 +#define reg_gio_r_masked_intr___pa0___width 1 +#define reg_gio_r_masked_intr___pa0___bit 0 +#define reg_gio_r_masked_intr___pa1___lsb 1 +#define reg_gio_r_masked_intr___pa1___width 1 +#define reg_gio_r_masked_intr___pa1___bit 1 +#define reg_gio_r_masked_intr___pa2___lsb 2 +#define reg_gio_r_masked_intr___pa2___width 1 +#define reg_gio_r_masked_intr___pa2___bit 2 +#define reg_gio_r_masked_intr___pa3___lsb 3 +#define reg_gio_r_masked_intr___pa3___width 1 +#define reg_gio_r_masked_intr___pa3___bit 3 +#define reg_gio_r_masked_intr___pa4___lsb 4 +#define reg_gio_r_masked_intr___pa4___width 1 +#define reg_gio_r_masked_intr___pa4___bit 4 +#define reg_gio_r_masked_intr___pa5___lsb 5 +#define reg_gio_r_masked_intr___pa5___width 1 +#define reg_gio_r_masked_intr___pa5___bit 5 +#define reg_gio_r_masked_intr___pa6___lsb 6 +#define reg_gio_r_masked_intr___pa6___width 1 +#define reg_gio_r_masked_intr___pa6___bit 6 +#define reg_gio_r_masked_intr___pa7___lsb 7 +#define reg_gio_r_masked_intr___pa7___width 1 +#define reg_gio_r_masked_intr___pa7___bit 7 +#define reg_gio_r_masked_intr_offset 28 + +/* Register rw_pb_dout, scope gio, type rw */ +#define reg_gio_rw_pb_dout___data___lsb 0 +#define reg_gio_rw_pb_dout___data___width 18 +#define reg_gio_rw_pb_dout_offset 32 + +/* Register r_pb_din, scope gio, type r */ +#define reg_gio_r_pb_din___data___lsb 0 +#define reg_gio_r_pb_din___data___width 18 +#define reg_gio_r_pb_din_offset 36 + +/* Register rw_pb_oe, scope gio, type rw */ +#define reg_gio_rw_pb_oe___oe___lsb 0 +#define reg_gio_rw_pb_oe___oe___width 18 +#define reg_gio_rw_pb_oe_offset 40 + +/* Register rw_pc_dout, scope gio, type rw */ +#define reg_gio_rw_pc_dout___data___lsb 0 +#define reg_gio_rw_pc_dout___data___width 18 +#define reg_gio_rw_pc_dout_offset 48 + +/* Register r_pc_din, scope gio, type r */ +#define reg_gio_r_pc_din___data___lsb 0 +#define reg_gio_r_pc_din___data___width 18 +#define reg_gio_r_pc_din_offset 52 + +/* Register rw_pc_oe, scope gio, type rw */ +#define reg_gio_rw_pc_oe___oe___lsb 0 +#define reg_gio_rw_pc_oe___oe___width 18 +#define reg_gio_rw_pc_oe_offset 56 + +/* Register rw_pd_dout, scope gio, type rw */ +#define reg_gio_rw_pd_dout___data___lsb 0 +#define reg_gio_rw_pd_dout___data___width 18 +#define reg_gio_rw_pd_dout_offset 64 + +/* Register r_pd_din, scope gio, type r */ +#define reg_gio_r_pd_din___data___lsb 0 +#define reg_gio_r_pd_din___data___width 18 +#define reg_gio_r_pd_din_offset 68 + +/* Register rw_pd_oe, scope gio, type rw */ +#define reg_gio_rw_pd_oe___oe___lsb 0 +#define reg_gio_rw_pd_oe___oe___width 18 +#define reg_gio_rw_pd_oe_offset 72 + +/* Register rw_pe_dout, scope gio, type rw */ +#define reg_gio_rw_pe_dout___data___lsb 0 +#define reg_gio_rw_pe_dout___data___width 18 +#define reg_gio_rw_pe_dout_offset 80 + +/* Register r_pe_din, scope gio, type r */ +#define reg_gio_r_pe_din___data___lsb 0 +#define reg_gio_r_pe_din___data___width 18 +#define reg_gio_r_pe_din_offset 84 + +/* Register rw_pe_oe, scope gio, type rw */ +#define reg_gio_rw_pe_oe___oe___lsb 0 +#define reg_gio_rw_pe_oe___oe___width 18 +#define reg_gio_rw_pe_oe_offset 88 + + +/* Constants */ +#define regk_gio_anyedge 0x00000007 +#define regk_gio_hi 0x00000001 +#define regk_gio_lo 0x00000002 +#define regk_gio_negedge 0x00000006 +#define regk_gio_no 0x00000000 +#define regk_gio_off 0x00000000 +#define regk_gio_posedge 0x00000005 +#define regk_gio_rw_intr_cfg_default 0x00000000 +#define regk_gio_rw_intr_mask_default 0x00000000 +#define regk_gio_rw_pa_oe_default 0x00000000 +#define regk_gio_rw_pb_oe_default 0x00000000 +#define regk_gio_rw_pc_oe_default 0x00000000 +#define regk_gio_rw_pd_oe_default 0x00000000 +#define regk_gio_rw_pe_oe_default 0x00000000 +#define regk_gio_set 0x00000003 +#define regk_gio_yes 0x00000001 +#endif /* __gio_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/asm/pinmux_defs_asm.h b/include/asm-cris/arch-v32/mach-fs/hwregs/asm/pinmux_defs_asm.h new file mode 100644 index 000000000000..30cf5a936b64 --- /dev/null +++ b/include/asm-cris/arch-v32/mach-fs/hwregs/asm/pinmux_defs_asm.h @@ -0,0 +1,632 @@ +#ifndef __pinmux_defs_asm_h +#define __pinmux_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/pinmux/rtl/guinness/pinmux_regs.r + * id: pinmux_regs.r,v 1.40 2005/02/09 16:22:59 perz Exp + * last modfied: Mon Apr 11 16:09:11 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/pinmux_defs_asm.h ../../inst/pinmux/rtl/guinness/pinmux_regs.r + * id: $Id: pinmux_defs_asm.h,v 1.1 2007/04/11 11:00:39 ricardw Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_pa, scope pinmux, type rw */ +#define reg_pinmux_rw_pa___pa0___lsb 0 +#define reg_pinmux_rw_pa___pa0___width 1 +#define reg_pinmux_rw_pa___pa0___bit 0 +#define reg_pinmux_rw_pa___pa1___lsb 1 +#define reg_pinmux_rw_pa___pa1___width 1 +#define reg_pinmux_rw_pa___pa1___bit 1 +#define reg_pinmux_rw_pa___pa2___lsb 2 +#define reg_pinmux_rw_pa___pa2___width 1 +#define reg_pinmux_rw_pa___pa2___bit 2 +#define reg_pinmux_rw_pa___pa3___lsb 3 +#define reg_pinmux_rw_pa___pa3___width 1 +#define reg_pinmux_rw_pa___pa3___bit 3 +#define reg_pinmux_rw_pa___pa4___lsb 4 +#define reg_pinmux_rw_pa___pa4___width 1 +#define reg_pinmux_rw_pa___pa4___bit 4 +#define reg_pinmux_rw_pa___pa5___lsb 5 +#define reg_pinmux_rw_pa___pa5___width 1 +#define reg_pinmux_rw_pa___pa5___bit 5 +#define reg_pinmux_rw_pa___pa6___lsb 6 +#define reg_pinmux_rw_pa___pa6___width 1 +#define reg_pinmux_rw_pa___pa6___bit 6 +#define reg_pinmux_rw_pa___pa7___lsb 7 +#define reg_pinmux_rw_pa___pa7___width 1 +#define reg_pinmux_rw_pa___pa7___bit 7 +#define reg_pinmux_rw_pa___csp2_n___lsb 8 +#define reg_pinmux_rw_pa___csp2_n___width 1 +#define reg_pinmux_rw_pa___csp2_n___bit 8 +#define reg_pinmux_rw_pa___csp3_n___lsb 9 +#define reg_pinmux_rw_pa___csp3_n___width 1 +#define reg_pinmux_rw_pa___csp3_n___bit 9 +#define reg_pinmux_rw_pa___csp5_n___lsb 10 +#define reg_pinmux_rw_pa___csp5_n___width 1 +#define reg_pinmux_rw_pa___csp5_n___bit 10 +#define reg_pinmux_rw_pa___csp6_n___lsb 11 +#define reg_pinmux_rw_pa___csp6_n___width 1 +#define reg_pinmux_rw_pa___csp6_n___bit 11 +#define reg_pinmux_rw_pa___hsh4___lsb 12 +#define reg_pinmux_rw_pa___hsh4___width 1 +#define reg_pinmux_rw_pa___hsh4___bit 12 +#define reg_pinmux_rw_pa___hsh5___lsb 13 +#define reg_pinmux_rw_pa___hsh5___width 1 +#define reg_pinmux_rw_pa___hsh5___bit 13 +#define reg_pinmux_rw_pa___hsh6___lsb 14 +#define reg_pinmux_rw_pa___hsh6___width 1 +#define reg_pinmux_rw_pa___hsh6___bit 14 +#define reg_pinmux_rw_pa___hsh7___lsb 15 +#define reg_pinmux_rw_pa___hsh7___width 1 +#define reg_pinmux_rw_pa___hsh7___bit 15 +#define reg_pinmux_rw_pa_offset 0 + +/* Register rw_hwprot, scope pinmux, type rw */ +#define reg_pinmux_rw_hwprot___ser1___lsb 0 +#define reg_pinmux_rw_hwprot___ser1___width 1 +#define reg_pinmux_rw_hwprot___ser1___bit 0 +#define reg_pinmux_rw_hwprot___ser2___lsb 1 +#define reg_pinmux_rw_hwprot___ser2___width 1 +#define reg_pinmux_rw_hwprot___ser2___bit 1 +#define reg_pinmux_rw_hwprot___ser3___lsb 2 +#define reg_pinmux_rw_hwprot___ser3___width 1 +#define reg_pinmux_rw_hwprot___ser3___bit 2 +#define reg_pinmux_rw_hwprot___sser0___lsb 3 +#define reg_pinmux_rw_hwprot___sser0___width 1 +#define reg_pinmux_rw_hwprot___sser0___bit 3 +#define reg_pinmux_rw_hwprot___sser1___lsb 4 +#define reg_pinmux_rw_hwprot___sser1___width 1 +#define reg_pinmux_rw_hwprot___sser1___bit 4 +#define reg_pinmux_rw_hwprot___ata0___lsb 5 +#define reg_pinmux_rw_hwprot___ata0___width 1 +#define reg_pinmux_rw_hwprot___ata0___bit 5 +#define reg_pinmux_rw_hwprot___ata1___lsb 6 +#define reg_pinmux_rw_hwprot___ata1___width 1 +#define reg_pinmux_rw_hwprot___ata1___bit 6 +#define reg_pinmux_rw_hwprot___ata2___lsb 7 +#define reg_pinmux_rw_hwprot___ata2___width 1 +#define reg_pinmux_rw_hwprot___ata2___bit 7 +#define reg_pinmux_rw_hwprot___ata3___lsb 8 +#define reg_pinmux_rw_hwprot___ata3___width 1 +#define reg_pinmux_rw_hwprot___ata3___bit 8 +#define reg_pinmux_rw_hwprot___ata___lsb 9 +#define reg_pinmux_rw_hwprot___ata___width 1 +#define reg_pinmux_rw_hwprot___ata___bit 9 +#define reg_pinmux_rw_hwprot___eth1___lsb 10 +#define reg_pinmux_rw_hwprot___eth1___width 1 +#define reg_pinmux_rw_hwprot___eth1___bit 10 +#define reg_pinmux_rw_hwprot___eth1_mgm___lsb 11 +#define reg_pinmux_rw_hwprot___eth1_mgm___width 1 +#define reg_pinmux_rw_hwprot___eth1_mgm___bit 11 +#define reg_pinmux_rw_hwprot___timer___lsb 12 +#define reg_pinmux_rw_hwprot___timer___width 1 +#define reg_pinmux_rw_hwprot___timer___bit 12 +#define reg_pinmux_rw_hwprot___p21___lsb 13 +#define reg_pinmux_rw_hwprot___p21___width 1 +#define reg_pinmux_rw_hwprot___p21___bit 13 +#define reg_pinmux_rw_hwprot_offset 4 + +/* Register rw_pb_gio, scope pinmux, type rw */ +#define reg_pinmux_rw_pb_gio___pb0___lsb 0 +#define reg_pinmux_rw_pb_gio___pb0___width 1 +#define reg_pinmux_rw_pb_gio___pb0___bit 0 +#define reg_pinmux_rw_pb_gio___pb1___lsb 1 +#define reg_pinmux_rw_pb_gio___pb1___width 1 +#define reg_pinmux_rw_pb_gio___pb1___bit 1 +#define reg_pinmux_rw_pb_gio___pb2___lsb 2 +#define reg_pinmux_rw_pb_gio___pb2___width 1 +#define reg_pinmux_rw_pb_gio___pb2___bit 2 +#define reg_pinmux_rw_pb_gio___pb3___lsb 3 +#define reg_pinmux_rw_pb_gio___pb3___width 1 +#define reg_pinmux_rw_pb_gio___pb3___bit 3 +#define reg_pinmux_rw_pb_gio___pb4___lsb 4 +#define reg_pinmux_rw_pb_gio___pb4___width 1 +#define reg_pinmux_rw_pb_gio___pb4___bit 4 +#define reg_pinmux_rw_pb_gio___pb5___lsb 5 +#define reg_pinmux_rw_pb_gio___pb5___width 1 +#define reg_pinmux_rw_pb_gio___pb5___bit 5 +#define reg_pinmux_rw_pb_gio___pb6___lsb 6 +#define reg_pinmux_rw_pb_gio___pb6___width 1 +#define reg_pinmux_rw_pb_gio___pb6___bit 6 +#define reg_pinmux_rw_pb_gio___pb7___lsb 7 +#define reg_pinmux_rw_pb_gio___pb7___width 1 +#define reg_pinmux_rw_pb_gio___pb7___bit 7 +#define reg_pinmux_rw_pb_gio___pb8___lsb 8 +#define reg_pinmux_rw_pb_gio___pb8___width 1 +#define reg_pinmux_rw_pb_gio___pb8___bit 8 +#define reg_pinmux_rw_pb_gio___pb9___lsb 9 +#define reg_pinmux_rw_pb_gio___pb9___width 1 +#define reg_pinmux_rw_pb_gio___pb9___bit 9 +#define reg_pinmux_rw_pb_gio___pb10___lsb 10 +#define reg_pinmux_rw_pb_gio___pb10___width 1 +#define reg_pinmux_rw_pb_gio___pb10___bit 10 +#define reg_pinmux_rw_pb_gio___pb11___lsb 11 +#define reg_pinmux_rw_pb_gio___pb11___width 1 +#define reg_pinmux_rw_pb_gio___pb11___bit 11 +#define reg_pinmux_rw_pb_gio___pb12___lsb 12 +#define reg_pinmux_rw_pb_gio___pb12___width 1 +#define reg_pinmux_rw_pb_gio___pb12___bit 12 +#define reg_pinmux_rw_pb_gio___pb13___lsb 13 +#define reg_pinmux_rw_pb_gio___pb13___width 1 +#define reg_pinmux_rw_pb_gio___pb13___bit 13 +#define reg_pinmux_rw_pb_gio___pb14___lsb 14 +#define reg_pinmux_rw_pb_gio___pb14___width 1 +#define reg_pinmux_rw_pb_gio___pb14___bit 14 +#define reg_pinmux_rw_pb_gio___pb15___lsb 15 +#define reg_pinmux_rw_pb_gio___pb15___width 1 +#define reg_pinmux_rw_pb_gio___pb15___bit 15 +#define reg_pinmux_rw_pb_gio___pb16___lsb 16 +#define reg_pinmux_rw_pb_gio___pb16___width 1 +#define reg_pinmux_rw_pb_gio___pb16___bit 16 +#define reg_pinmux_rw_pb_gio___pb17___lsb 17 +#define reg_pinmux_rw_pb_gio___pb17___width 1 +#define reg_pinmux_rw_pb_gio___pb17___bit 17 +#define reg_pinmux_rw_pb_gio_offset 8 + +/* Register rw_pb_iop, scope pinmux, type rw */ +#define reg_pinmux_rw_pb_iop___pb0___lsb 0 +#define reg_pinmux_rw_pb_iop___pb0___width 1 +#define reg_pinmux_rw_pb_iop___pb0___bit 0 +#define reg_pinmux_rw_pb_iop___pb1___lsb 1 +#define reg_pinmux_rw_pb_iop___pb1___width 1 +#define reg_pinmux_rw_pb_iop___pb1___bit 1 +#define reg_pinmux_rw_pb_iop___pb2___lsb 2 +#define reg_pinmux_rw_pb_iop___pb2___width 1 +#define reg_pinmux_rw_pb_iop___pb2___bit 2 +#define reg_pinmux_rw_pb_iop___pb3___lsb 3 +#define reg_pinmux_rw_pb_iop___pb3___width 1 +#define reg_pinmux_rw_pb_iop___pb3___bit 3 +#define reg_pinmux_rw_pb_iop___pb4___lsb 4 +#define reg_pinmux_rw_pb_iop___pb4___width 1 +#define reg_pinmux_rw_pb_iop___pb4___bit 4 +#define reg_pinmux_rw_pb_iop___pb5___lsb 5 +#define reg_pinmux_rw_pb_iop___pb5___width 1 +#define reg_pinmux_rw_pb_iop___pb5___bit 5 +#define reg_pinmux_rw_pb_iop___pb6___lsb 6 +#define reg_pinmux_rw_pb_iop___pb6___width 1 +#define reg_pinmux_rw_pb_iop___pb6___bit 6 +#define reg_pinmux_rw_pb_iop___pb7___lsb 7 +#define reg_pinmux_rw_pb_iop___pb7___width 1 +#define reg_pinmux_rw_pb_iop___pb7___bit 7 +#define reg_pinmux_rw_pb_iop___pb8___lsb 8 +#define reg_pinmux_rw_pb_iop___pb8___width 1 +#define reg_pinmux_rw_pb_iop___pb8___bit 8 +#define reg_pinmux_rw_pb_iop___pb9___lsb 9 +#define reg_pinmux_rw_pb_iop___pb9___width 1 +#define reg_pinmux_rw_pb_iop___pb9___bit 9 +#define reg_pinmux_rw_pb_iop___pb10___lsb 10 +#define reg_pinmux_rw_pb_iop___pb10___width 1 +#define reg_pinmux_rw_pb_iop___pb10___bit 10 +#define reg_pinmux_rw_pb_iop___pb11___lsb 11 +#define reg_pinmux_rw_pb_iop___pb11___width 1 +#define reg_pinmux_rw_pb_iop___pb11___bit 11 +#define reg_pinmux_rw_pb_iop___pb12___lsb 12 +#define reg_pinmux_rw_pb_iop___pb12___width 1 +#define reg_pinmux_rw_pb_iop___pb12___bit 12 +#define reg_pinmux_rw_pb_iop___pb13___lsb 13 +#define reg_pinmux_rw_pb_iop___pb13___width 1 +#define reg_pinmux_rw_pb_iop___pb13___bit 13 +#define reg_pinmux_rw_pb_iop___pb14___lsb 14 +#define reg_pinmux_rw_pb_iop___pb14___width 1 +#define reg_pinmux_rw_pb_iop___pb14___bit 14 +#define reg_pinmux_rw_pb_iop___pb15___lsb 15 +#define reg_pinmux_rw_pb_iop___pb15___width 1 +#define reg_pinmux_rw_pb_iop___pb15___bit 15 +#define reg_pinmux_rw_pb_iop___pb16___lsb 16 +#define reg_pinmux_rw_pb_iop___pb16___width 1 +#define reg_pinmux_rw_pb_iop___pb16___bit 16 +#define reg_pinmux_rw_pb_iop___pb17___lsb 17 +#define reg_pinmux_rw_pb_iop___pb17___width 1 +#define reg_pinmux_rw_pb_iop___pb17___bit 17 +#define reg_pinmux_rw_pb_iop_offset 12 + +/* Register rw_pc_gio, scope pinmux, type rw */ +#define reg_pinmux_rw_pc_gio___pc0___lsb 0 +#define reg_pinmux_rw_pc_gio___pc0___width 1 +#define reg_pinmux_rw_pc_gio___pc0___bit 0 +#define reg_pinmux_rw_pc_gio___pc1___lsb 1 +#define reg_pinmux_rw_pc_gio___pc1___width 1 +#define reg_pinmux_rw_pc_gio___pc1___bit 1 +#define reg_pinmux_rw_pc_gio___pc2___lsb 2 +#define reg_pinmux_rw_pc_gio___pc2___width 1 +#define reg_pinmux_rw_pc_gio___pc2___bit 2 +#define reg_pinmux_rw_pc_gio___pc3___lsb 3 +#define reg_pinmux_rw_pc_gio___pc3___width 1 +#define reg_pinmux_rw_pc_gio___pc3___bit 3 +#define reg_pinmux_rw_pc_gio___pc4___lsb 4 +#define reg_pinmux_rw_pc_gio___pc4___width 1 +#define reg_pinmux_rw_pc_gio___pc4___bit 4 +#define reg_pinmux_rw_pc_gio___pc5___lsb 5 +#define reg_pinmux_rw_pc_gio___pc5___width 1 +#define reg_pinmux_rw_pc_gio___pc5___bit 5 +#define reg_pinmux_rw_pc_gio___pc6___lsb 6 +#define reg_pinmux_rw_pc_gio___pc6___width 1 +#define reg_pinmux_rw_pc_gio___pc6___bit 6 +#define reg_pinmux_rw_pc_gio___pc7___lsb 7 +#define reg_pinmux_rw_pc_gio___pc7___width 1 +#define reg_pinmux_rw_pc_gio___pc7___bit 7 +#define reg_pinmux_rw_pc_gio___pc8___lsb 8 +#define reg_pinmux_rw_pc_gio___pc8___width 1 +#define reg_pinmux_rw_pc_gio___pc8___bit 8 +#define reg_pinmux_rw_pc_gio___pc9___lsb 9 +#define reg_pinmux_rw_pc_gio___pc9___width 1 +#define reg_pinmux_rw_pc_gio___pc9___bit 9 +#define reg_pinmux_rw_pc_gio___pc10___lsb 10 +#define reg_pinmux_rw_pc_gio___pc10___width 1 +#define reg_pinmux_rw_pc_gio___pc10___bit 10 +#define reg_pinmux_rw_pc_gio___pc11___lsb 11 +#define reg_pinmux_rw_pc_gio___pc11___width 1 +#define reg_pinmux_rw_pc_gio___pc11___bit 11 +#define reg_pinmux_rw_pc_gio___pc12___lsb 12 +#define reg_pinmux_rw_pc_gio___pc12___width 1 +#define reg_pinmux_rw_pc_gio___pc12___bit 12 +#define reg_pinmux_rw_pc_gio___pc13___lsb 13 +#define reg_pinmux_rw_pc_gio___pc13___width 1 +#define reg_pinmux_rw_pc_gio___pc13___bit 13 +#define reg_pinmux_rw_pc_gio___pc14___lsb 14 +#define reg_pinmux_rw_pc_gio___pc14___width 1 +#define reg_pinmux_rw_pc_gio___pc14___bit 14 +#define reg_pinmux_rw_pc_gio___pc15___lsb 15 +#define reg_pinmux_rw_pc_gio___pc15___width 1 +#define reg_pinmux_rw_pc_gio___pc15___bit 15 +#define reg_pinmux_rw_pc_gio___pc16___lsb 16 +#define reg_pinmux_rw_pc_gio___pc16___width 1 +#define reg_pinmux_rw_pc_gio___pc16___bit 16 +#define reg_pinmux_rw_pc_gio___pc17___lsb 17 +#define reg_pinmux_rw_pc_gio___pc17___width 1 +#define reg_pinmux_rw_pc_gio___pc17___bit 17 +#define reg_pinmux_rw_pc_gio_offset 16 + +/* Register rw_pc_iop, scope pinmux, type rw */ +#define reg_pinmux_rw_pc_iop___pc0___lsb 0 +#define reg_pinmux_rw_pc_iop___pc0___width 1 +#define reg_pinmux_rw_pc_iop___pc0___bit 0 +#define reg_pinmux_rw_pc_iop___pc1___lsb 1 +#define reg_pinmux_rw_pc_iop___pc1___width 1 +#define reg_pinmux_rw_pc_iop___pc1___bit 1 +#define reg_pinmux_rw_pc_iop___pc2___lsb 2 +#define reg_pinmux_rw_pc_iop___pc2___width 1 +#define reg_pinmux_rw_pc_iop___pc2___bit 2 +#define reg_pinmux_rw_pc_iop___pc3___lsb 3 +#define reg_pinmux_rw_pc_iop___pc3___width 1 +#define reg_pinmux_rw_pc_iop___pc3___bit 3 +#define reg_pinmux_rw_pc_iop___pc4___lsb 4 +#define reg_pinmux_rw_pc_iop___pc4___width 1 +#define reg_pinmux_rw_pc_iop___pc4___bit 4 +#define reg_pinmux_rw_pc_iop___pc5___lsb 5 +#define reg_pinmux_rw_pc_iop___pc5___width 1 +#define reg_pinmux_rw_pc_iop___pc5___bit 5 +#define reg_pinmux_rw_pc_iop___pc6___lsb 6 +#define reg_pinmux_rw_pc_iop___pc6___width 1 +#define reg_pinmux_rw_pc_iop___pc6___bit 6 +#define reg_pinmux_rw_pc_iop___pc7___lsb 7 +#define reg_pinmux_rw_pc_iop___pc7___width 1 +#define reg_pinmux_rw_pc_iop___pc7___bit 7 +#define reg_pinmux_rw_pc_iop___pc8___lsb 8 +#define reg_pinmux_rw_pc_iop___pc8___width 1 +#define reg_pinmux_rw_pc_iop___pc8___bit 8 +#define reg_pinmux_rw_pc_iop___pc9___lsb 9 +#define reg_pinmux_rw_pc_iop___pc9___width 1 +#define reg_pinmux_rw_pc_iop___pc9___bit 9 +#define reg_pinmux_rw_pc_iop___pc10___lsb 10 +#define reg_pinmux_rw_pc_iop___pc10___width 1 +#define reg_pinmux_rw_pc_iop___pc10___bit 10 +#define reg_pinmux_rw_pc_iop___pc11___lsb 11 +#define reg_pinmux_rw_pc_iop___pc11___width 1 +#define reg_pinmux_rw_pc_iop___pc11___bit 11 +#define reg_pinmux_rw_pc_iop___pc12___lsb 12 +#define reg_pinmux_rw_pc_iop___pc12___width 1 +#define reg_pinmux_rw_pc_iop___pc12___bit 12 +#define reg_pinmux_rw_pc_iop___pc13___lsb 13 +#define reg_pinmux_rw_pc_iop___pc13___width 1 +#define reg_pinmux_rw_pc_iop___pc13___bit 13 +#define reg_pinmux_rw_pc_iop___pc14___lsb 14 +#define reg_pinmux_rw_pc_iop___pc14___width 1 +#define reg_pinmux_rw_pc_iop___pc14___bit 14 +#define reg_pinmux_rw_pc_iop___pc15___lsb 15 +#define reg_pinmux_rw_pc_iop___pc15___width 1 +#define reg_pinmux_rw_pc_iop___pc15___bit 15 +#define reg_pinmux_rw_pc_iop___pc16___lsb 16 +#define reg_pinmux_rw_pc_iop___pc16___width 1 +#define reg_pinmux_rw_pc_iop___pc16___bit 16 +#define reg_pinmux_rw_pc_iop___pc17___lsb 17 +#define reg_pinmux_rw_pc_iop___pc17___width 1 +#define reg_pinmux_rw_pc_iop___pc17___bit 17 +#define reg_pinmux_rw_pc_iop_offset 20 + +/* Register rw_pd_gio, scope pinmux, type rw */ +#define reg_pinmux_rw_pd_gio___pd0___lsb 0 +#define reg_pinmux_rw_pd_gio___pd0___width 1 +#define reg_pinmux_rw_pd_gio___pd0___bit 0 +#define reg_pinmux_rw_pd_gio___pd1___lsb 1 +#define reg_pinmux_rw_pd_gio___pd1___width 1 +#define reg_pinmux_rw_pd_gio___pd1___bit 1 +#define reg_pinmux_rw_pd_gio___pd2___lsb 2 +#define reg_pinmux_rw_pd_gio___pd2___width 1 +#define reg_pinmux_rw_pd_gio___pd2___bit 2 +#define reg_pinmux_rw_pd_gio___pd3___lsb 3 +#define reg_pinmux_rw_pd_gio___pd3___width 1 +#define reg_pinmux_rw_pd_gio___pd3___bit 3 +#define reg_pinmux_rw_pd_gio___pd4___lsb 4 +#define reg_pinmux_rw_pd_gio___pd4___width 1 +#define reg_pinmux_rw_pd_gio___pd4___bit 4 +#define reg_pinmux_rw_pd_gio___pd5___lsb 5 +#define reg_pinmux_rw_pd_gio___pd5___width 1 +#define reg_pinmux_rw_pd_gio___pd5___bit 5 +#define reg_pinmux_rw_pd_gio___pd6___lsb 6 +#define reg_pinmux_rw_pd_gio___pd6___width 1 +#define reg_pinmux_rw_pd_gio___pd6___bit 6 +#define reg_pinmux_rw_pd_gio___pd7___lsb 7 +#define reg_pinmux_rw_pd_gio___pd7___width 1 +#define reg_pinmux_rw_pd_gio___pd7___bit 7 +#define reg_pinmux_rw_pd_gio___pd8___lsb 8 +#define reg_pinmux_rw_pd_gio___pd8___width 1 +#define reg_pinmux_rw_pd_gio___pd8___bit 8 +#define reg_pinmux_rw_pd_gio___pd9___lsb 9 +#define reg_pinmux_rw_pd_gio___pd9___width 1 +#define reg_pinmux_rw_pd_gio___pd9___bit 9 +#define reg_pinmux_rw_pd_gio___pd10___lsb 10 +#define reg_pinmux_rw_pd_gio___pd10___width 1 +#define reg_pinmux_rw_pd_gio___pd10___bit 10 +#define reg_pinmux_rw_pd_gio___pd11___lsb 11 +#define reg_pinmux_rw_pd_gio___pd11___width 1 +#define reg_pinmux_rw_pd_gio___pd11___bit 11 +#define reg_pinmux_rw_pd_gio___pd12___lsb 12 +#define reg_pinmux_rw_pd_gio___pd12___width 1 +#define reg_pinmux_rw_pd_gio___pd12___bit 12 +#define reg_pinmux_rw_pd_gio___pd13___lsb 13 +#define reg_pinmux_rw_pd_gio___pd13___width 1 +#define reg_pinmux_rw_pd_gio___pd13___bit 13 +#define reg_pinmux_rw_pd_gio___pd14___lsb 14 +#define reg_pinmux_rw_pd_gio___pd14___width 1 +#define reg_pinmux_rw_pd_gio___pd14___bit 14 +#define reg_pinmux_rw_pd_gio___pd15___lsb 15 +#define reg_pinmux_rw_pd_gio___pd15___width 1 +#define reg_pinmux_rw_pd_gio___pd15___bit 15 +#define reg_pinmux_rw_pd_gio___pd16___lsb 16 +#define reg_pinmux_rw_pd_gio___pd16___width 1 +#define reg_pinmux_rw_pd_gio___pd16___bit 16 +#define reg_pinmux_rw_pd_gio___pd17___lsb 17 +#define reg_pinmux_rw_pd_gio___pd17___width 1 +#define reg_pinmux_rw_pd_gio___pd17___bit 17 +#define reg_pinmux_rw_pd_gio_offset 24 + +/* Register rw_pd_iop, scope pinmux, type rw */ +#define reg_pinmux_rw_pd_iop___pd0___lsb 0 +#define reg_pinmux_rw_pd_iop___pd0___width 1 +#define reg_pinmux_rw_pd_iop___pd0___bit 0 +#define reg_pinmux_rw_pd_iop___pd1___lsb 1 +#define reg_pinmux_rw_pd_iop___pd1___width 1 +#define reg_pinmux_rw_pd_iop___pd1___bit 1 +#define reg_pinmux_rw_pd_iop___pd2___lsb 2 +#define reg_pinmux_rw_pd_iop___pd2___width 1 +#define reg_pinmux_rw_pd_iop___pd2___bit 2 +#define reg_pinmux_rw_pd_iop___pd3___lsb 3 +#define reg_pinmux_rw_pd_iop___pd3___width 1 +#define reg_pinmux_rw_pd_iop___pd3___bit 3 +#define reg_pinmux_rw_pd_iop___pd4___lsb 4 +#define reg_pinmux_rw_pd_iop___pd4___width 1 +#define reg_pinmux_rw_pd_iop___pd4___bit 4 +#define reg_pinmux_rw_pd_iop___pd5___lsb 5 +#define reg_pinmux_rw_pd_iop___pd5___width 1 +#define reg_pinmux_rw_pd_iop___pd5___bit 5 +#define reg_pinmux_rw_pd_iop___pd6___lsb 6 +#define reg_pinmux_rw_pd_iop___pd6___width 1 +#define reg_pinmux_rw_pd_iop___pd6___bit 6 +#define reg_pinmux_rw_pd_iop___pd7___lsb 7 +#define reg_pinmux_rw_pd_iop___pd7___width 1 +#define reg_pinmux_rw_pd_iop___pd7___bit 7 +#define reg_pinmux_rw_pd_iop___pd8___lsb 8 +#define reg_pinmux_rw_pd_iop___pd8___width 1 +#define reg_pinmux_rw_pd_iop___pd8___bit 8 +#define reg_pinmux_rw_pd_iop___pd9___lsb 9 +#define reg_pinmux_rw_pd_iop___pd9___width 1 +#define reg_pinmux_rw_pd_iop___pd9___bit 9 +#define reg_pinmux_rw_pd_iop___pd10___lsb 10 +#define reg_pinmux_rw_pd_iop___pd10___width 1 +#define reg_pinmux_rw_pd_iop___pd10___bit 10 +#define reg_pinmux_rw_pd_iop___pd11___lsb 11 +#define reg_pinmux_rw_pd_iop___pd11___width 1 +#define reg_pinmux_rw_pd_iop___pd11___bit 11 +#define reg_pinmux_rw_pd_iop___pd12___lsb 12 +#define reg_pinmux_rw_pd_iop___pd12___width 1 +#define reg_pinmux_rw_pd_iop___pd12___bit 12 +#define reg_pinmux_rw_pd_iop___pd13___lsb 13 +#define reg_pinmux_rw_pd_iop___pd13___width 1 +#define reg_pinmux_rw_pd_iop___pd13___bit 13 +#define reg_pinmux_rw_pd_iop___pd14___lsb 14 +#define reg_pinmux_rw_pd_iop___pd14___width 1 +#define reg_pinmux_rw_pd_iop___pd14___bit 14 +#define reg_pinmux_rw_pd_iop___pd15___lsb 15 +#define reg_pinmux_rw_pd_iop___pd15___width 1 +#define reg_pinmux_rw_pd_iop___pd15___bit 15 +#define reg_pinmux_rw_pd_iop___pd16___lsb 16 +#define reg_pinmux_rw_pd_iop___pd16___width 1 +#define reg_pinmux_rw_pd_iop___pd16___bit 16 +#define reg_pinmux_rw_pd_iop___pd17___lsb 17 +#define reg_pinmux_rw_pd_iop___pd17___width 1 +#define reg_pinmux_rw_pd_iop___pd17___bit 17 +#define reg_pinmux_rw_pd_iop_offset 28 + +/* Register rw_pe_gio, scope pinmux, type rw */ +#define reg_pinmux_rw_pe_gio___pe0___lsb 0 +#define reg_pinmux_rw_pe_gio___pe0___width 1 +#define reg_pinmux_rw_pe_gio___pe0___bit 0 +#define reg_pinmux_rw_pe_gio___pe1___lsb 1 +#define reg_pinmux_rw_pe_gio___pe1___width 1 +#define reg_pinmux_rw_pe_gio___pe1___bit 1 +#define reg_pinmux_rw_pe_gio___pe2___lsb 2 +#define reg_pinmux_rw_pe_gio___pe2___width 1 +#define reg_pinmux_rw_pe_gio___pe2___bit 2 +#define reg_pinmux_rw_pe_gio___pe3___lsb 3 +#define reg_pinmux_rw_pe_gio___pe3___width 1 +#define reg_pinmux_rw_pe_gio___pe3___bit 3 +#define reg_pinmux_rw_pe_gio___pe4___lsb 4 +#define reg_pinmux_rw_pe_gio___pe4___width 1 +#define reg_pinmux_rw_pe_gio___pe4___bit 4 +#define reg_pinmux_rw_pe_gio___pe5___lsb 5 +#define reg_pinmux_rw_pe_gio___pe5___width 1 +#define reg_pinmux_rw_pe_gio___pe5___bit 5 +#define reg_pinmux_rw_pe_gio___pe6___lsb 6 +#define reg_pinmux_rw_pe_gio___pe6___width 1 +#define reg_pinmux_rw_pe_gio___pe6___bit 6 +#define reg_pinmux_rw_pe_gio___pe7___lsb 7 +#define reg_pinmux_rw_pe_gio___pe7___width 1 +#define reg_pinmux_rw_pe_gio___pe7___bit 7 +#define reg_pinmux_rw_pe_gio___pe8___lsb 8 +#define reg_pinmux_rw_pe_gio___pe8___width 1 +#define reg_pinmux_rw_pe_gio___pe8___bit 8 +#define reg_pinmux_rw_pe_gio___pe9___lsb 9 +#define reg_pinmux_rw_pe_gio___pe9___width 1 +#define reg_pinmux_rw_pe_gio___pe9___bit 9 +#define reg_pinmux_rw_pe_gio___pe10___lsb 10 +#define reg_pinmux_rw_pe_gio___pe10___width 1 +#define reg_pinmux_rw_pe_gio___pe10___bit 10 +#define reg_pinmux_rw_pe_gio___pe11___lsb 11 +#define reg_pinmux_rw_pe_gio___pe11___width 1 +#define reg_pinmux_rw_pe_gio___pe11___bit 11 +#define reg_pinmux_rw_pe_gio___pe12___lsb 12 +#define reg_pinmux_rw_pe_gio___pe12___width 1 +#define reg_pinmux_rw_pe_gio___pe12___bit 12 +#define reg_pinmux_rw_pe_gio___pe13___lsb 13 +#define reg_pinmux_rw_pe_gio___pe13___width 1 +#define reg_pinmux_rw_pe_gio___pe13___bit 13 +#define reg_pinmux_rw_pe_gio___pe14___lsb 14 +#define reg_pinmux_rw_pe_gio___pe14___width 1 +#define reg_pinmux_rw_pe_gio___pe14___bit 14 +#define reg_pinmux_rw_pe_gio___pe15___lsb 15 +#define reg_pinmux_rw_pe_gio___pe15___width 1 +#define reg_pinmux_rw_pe_gio___pe15___bit 15 +#define reg_pinmux_rw_pe_gio___pe16___lsb 16 +#define reg_pinmux_rw_pe_gio___pe16___width 1 +#define reg_pinmux_rw_pe_gio___pe16___bit 16 +#define reg_pinmux_rw_pe_gio___pe17___lsb 17 +#define reg_pinmux_rw_pe_gio___pe17___width 1 +#define reg_pinmux_rw_pe_gio___pe17___bit 17 +#define reg_pinmux_rw_pe_gio_offset 32 + +/* Register rw_pe_iop, scope pinmux, type rw */ +#define reg_pinmux_rw_pe_iop___pe0___lsb 0 +#define reg_pinmux_rw_pe_iop___pe0___width 1 +#define reg_pinmux_rw_pe_iop___pe0___bit 0 +#define reg_pinmux_rw_pe_iop___pe1___lsb 1 +#define reg_pinmux_rw_pe_iop___pe1___width 1 +#define reg_pinmux_rw_pe_iop___pe1___bit 1 +#define reg_pinmux_rw_pe_iop___pe2___lsb 2 +#define reg_pinmux_rw_pe_iop___pe2___width 1 +#define reg_pinmux_rw_pe_iop___pe2___bit 2 +#define reg_pinmux_rw_pe_iop___pe3___lsb 3 +#define reg_pinmux_rw_pe_iop___pe3___width 1 +#define reg_pinmux_rw_pe_iop___pe3___bit 3 +#define reg_pinmux_rw_pe_iop___pe4___lsb 4 +#define reg_pinmux_rw_pe_iop___pe4___width 1 +#define reg_pinmux_rw_pe_iop___pe4___bit 4 +#define reg_pinmux_rw_pe_iop___pe5___lsb 5 +#define reg_pinmux_rw_pe_iop___pe5___width 1 +#define reg_pinmux_rw_pe_iop___pe5___bit 5 +#define reg_pinmux_rw_pe_iop___pe6___lsb 6 +#define reg_pinmux_rw_pe_iop___pe6___width 1 +#define reg_pinmux_rw_pe_iop___pe6___bit 6 +#define reg_pinmux_rw_pe_iop___pe7___lsb 7 +#define reg_pinmux_rw_pe_iop___pe7___width 1 +#define reg_pinmux_rw_pe_iop___pe7___bit 7 +#define reg_pinmux_rw_pe_iop___pe8___lsb 8 +#define reg_pinmux_rw_pe_iop___pe8___width 1 +#define reg_pinmux_rw_pe_iop___pe8___bit 8 +#define reg_pinmux_rw_pe_iop___pe9___lsb 9 +#define reg_pinmux_rw_pe_iop___pe9___width 1 +#define reg_pinmux_rw_pe_iop___pe9___bit 9 +#define reg_pinmux_rw_pe_iop___pe10___lsb 10 +#define reg_pinmux_rw_pe_iop___pe10___width 1 +#define reg_pinmux_rw_pe_iop___pe10___bit 10 +#define reg_pinmux_rw_pe_iop___pe11___lsb 11 +#define reg_pinmux_rw_pe_iop___pe11___width 1 +#define reg_pinmux_rw_pe_iop___pe11___bit 11 +#define reg_pinmux_rw_pe_iop___pe12___lsb 12 +#define reg_pinmux_rw_pe_iop___pe12___width 1 +#define reg_pinmux_rw_pe_iop___pe12___bit 12 +#define reg_pinmux_rw_pe_iop___pe13___lsb 13 +#define reg_pinmux_rw_pe_iop___pe13___width 1 +#define reg_pinmux_rw_pe_iop___pe13___bit 13 +#define reg_pinmux_rw_pe_iop___pe14___lsb 14 +#define reg_pinmux_rw_pe_iop___pe14___width 1 +#define reg_pinmux_rw_pe_iop___pe14___bit 14 +#define reg_pinmux_rw_pe_iop___pe15___lsb 15 +#define reg_pinmux_rw_pe_iop___pe15___width 1 +#define reg_pinmux_rw_pe_iop___pe15___bit 15 +#define reg_pinmux_rw_pe_iop___pe16___lsb 16 +#define reg_pinmux_rw_pe_iop___pe16___width 1 +#define reg_pinmux_rw_pe_iop___pe16___bit 16 +#define reg_pinmux_rw_pe_iop___pe17___lsb 17 +#define reg_pinmux_rw_pe_iop___pe17___width 1 +#define reg_pinmux_rw_pe_iop___pe17___bit 17 +#define reg_pinmux_rw_pe_iop_offset 36 + +/* Register rw_usb_phy, scope pinmux, type rw */ +#define reg_pinmux_rw_usb_phy___en_usb0___lsb 0 +#define reg_pinmux_rw_usb_phy___en_usb0___width 1 +#define reg_pinmux_rw_usb_phy___en_usb0___bit 0 +#define reg_pinmux_rw_usb_phy___en_usb1___lsb 1 +#define reg_pinmux_rw_usb_phy___en_usb1___width 1 +#define reg_pinmux_rw_usb_phy___en_usb1___bit 1 +#define reg_pinmux_rw_usb_phy_offset 40 + + +/* Constants */ +#define regk_pinmux_no 0x00000000 +#define regk_pinmux_rw_hwprot_default 0x00000000 +#define regk_pinmux_rw_pa_default 0x00000000 +#define regk_pinmux_rw_pb_gio_default 0x00000000 +#define regk_pinmux_rw_pb_iop_default 0x00000000 +#define regk_pinmux_rw_pc_gio_default 0x00000000 +#define regk_pinmux_rw_pc_iop_default 0x00000000 +#define regk_pinmux_rw_pd_gio_default 0x00000000 +#define regk_pinmux_rw_pd_iop_default 0x00000000 +#define regk_pinmux_rw_pe_gio_default 0x00000000 +#define regk_pinmux_rw_pe_iop_default 0x00000000 +#define regk_pinmux_rw_usb_phy_default 0x00000000 +#define regk_pinmux_yes 0x00000001 +#endif /* __pinmux_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/asm/reg_map_asm.h b/include/asm-cris/arch-v32/mach-fs/hwregs/asm/reg_map_asm.h new file mode 100644 index 000000000000..87517aebd2cb --- /dev/null +++ b/include/asm-cris/arch-v32/mach-fs/hwregs/asm/reg_map_asm.h @@ -0,0 +1,96 @@ +#ifndef __reg_map_h +#define __reg_map_h + +/* + * This file is autogenerated from + * file: ../../mod/fakereg.rmap + * id: fakereg.rmap,v 1.3 2004/02/11 19:53:22 ronny Exp + * last modified: Wed Feb 11 20:53:25 2004 + * file: ../../rtl/global.rmap + * id: global.rmap,v 1.3 2003/08/18 15:08:23 mikaeln Exp + * last modified: Mon Aug 18 17:08:23 2003 + * file: ../../mod/modreg.rmap + * id: modreg.rmap,v 1.31 2004/02/20 15:40:04 stefans Exp + * last modified: Fri Feb 20 16:40:04 2004 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/reg_map_asm.h -base 0xb0000000 ../../rtl/global.rmap ../../mod/modreg.rmap ../../inst/memarb/rtl/guinness/marb_top.r ../../mod/fakereg.rmap + * id: $Id: reg_map_asm.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +#define regi_artpec_mod 0xb7044000 +#define regi_ata 0xb0032000 +#define regi_ata_mod 0xb7006000 +#define regi_barber 0xb701a000 +#define regi_bif_core 0xb0014000 +#define regi_bif_dma 0xb0016000 +#define regi_bif_slave 0xb0018000 +#define regi_bif_slave_ext 0xac000000 +#define regi_bus_master 0xb703c000 +#define regi_config 0xb003c000 +#define regi_dma0 0xb0000000 +#define regi_dma1 0xb0002000 +#define regi_dma2 0xb0004000 +#define regi_dma3 0xb0006000 +#define regi_dma4 0xb0008000 +#define regi_dma5 0xb000a000 +#define regi_dma6 0xb000c000 +#define regi_dma7 0xb000e000 +#define regi_dma8 0xb0010000 +#define regi_dma9 0xb0012000 +#define regi_eth0 0xb0034000 +#define regi_eth1 0xb0036000 +#define regi_eth_mod 0xb7004000 +#define regi_eth_mod1 0xb701c000 +#define regi_eth_strmod 0xb7008000 +#define regi_eth_strmod1 0xb7032000 +#define regi_ext_dma 0xb703a000 +#define regi_ext_mem 0xb7046000 +#define regi_gen_io 0xb7016000 +#define regi_gio 0xb001a000 +#define regi_hook 0xb7000000 +#define regi_iop 0xb0020000 +#define regi_irq 0xb001c000 +#define regi_irq_nmi 0xb701e000 +#define regi_marb 0xb003e000 +#define regi_marb_bp0 0xb003e240 +#define regi_marb_bp1 0xb003e280 +#define regi_marb_bp2 0xb003e2c0 +#define regi_marb_bp3 0xb003e300 +#define regi_nand_mod 0xb7014000 +#define regi_p21 0xb002e000 +#define regi_p21_mod 0xb7042000 +#define regi_pci_mod 0xb7010000 +#define regi_pin_test 0xb7018000 +#define regi_pinmux 0xb0038000 +#define regi_sdram_chk 0xb703e000 +#define regi_sdram_mod 0xb7012000 +#define regi_ser0 0xb0026000 +#define regi_ser1 0xb0028000 +#define regi_ser2 0xb002a000 +#define regi_ser3 0xb002c000 +#define regi_ser_mod0 0xb7020000 +#define regi_ser_mod1 0xb7022000 +#define regi_ser_mod2 0xb7024000 +#define regi_ser_mod3 0xb7026000 +#define regi_smif_stat 0xb700e000 +#define regi_sser0 0xb0022000 +#define regi_sser1 0xb0024000 +#define regi_sser_mod0 0xb700a000 +#define regi_sser_mod1 0xb700c000 +#define regi_strcop 0xb0030000 +#define regi_strmux 0xb003a000 +#define regi_strmux_tst 0xb7040000 +#define regi_tap 0xb7002000 +#define regi_timer 0xb001e000 +#define regi_timer_mod 0xb7034000 +#define regi_trace 0xb0040000 +#define regi_usb0 0xb7028000 +#define regi_usb1 0xb702a000 +#define regi_usb2 0xb702c000 +#define regi_usb3 0xb702e000 +#define regi_usb_dev 0xb7030000 +#define regi_utmi_mod0 0xb7036000 +#define regi_utmi_mod1 0xb7038000 +#endif /* __reg_map_h */ diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/asm/timer_defs_asm.h b/include/asm-cris/arch-v32/mach-fs/hwregs/asm/timer_defs_asm.h new file mode 100644 index 000000000000..e1197194d5c1 --- /dev/null +++ b/include/asm-cris/arch-v32/mach-fs/hwregs/asm/timer_defs_asm.h @@ -0,0 +1,229 @@ +#ifndef __timer_defs_asm_h +#define __timer_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/timer/rtl/timer_regs.r + * id: timer_regs.r,v 1.7 2003/03/11 11:16:59 perz Exp + * last modfied: Mon Apr 11 16:09:53 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/timer_defs_asm.h ../../inst/timer/rtl/timer_regs.r + * id: $Id: timer_defs_asm.h,v 1.1 2007/04/11 13:51:01 ricardw Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_tmr0_div, scope timer, type rw */ +#define reg_timer_rw_tmr0_div_offset 0 + +/* Register r_tmr0_data, scope timer, type r */ +#define reg_timer_r_tmr0_data_offset 4 + +/* Register rw_tmr0_ctrl, scope timer, type rw */ +#define reg_timer_rw_tmr0_ctrl___op___lsb 0 +#define reg_timer_rw_tmr0_ctrl___op___width 2 +#define reg_timer_rw_tmr0_ctrl___freq___lsb 2 +#define reg_timer_rw_tmr0_ctrl___freq___width 3 +#define reg_timer_rw_tmr0_ctrl_offset 8 + +/* Register rw_tmr1_div, scope timer, type rw */ +#define reg_timer_rw_tmr1_div_offset 16 + +/* Register r_tmr1_data, scope timer, type r */ +#define reg_timer_r_tmr1_data_offset 20 + +/* Register rw_tmr1_ctrl, scope timer, type rw */ +#define reg_timer_rw_tmr1_ctrl___op___lsb 0 +#define reg_timer_rw_tmr1_ctrl___op___width 2 +#define reg_timer_rw_tmr1_ctrl___freq___lsb 2 +#define reg_timer_rw_tmr1_ctrl___freq___width 3 +#define reg_timer_rw_tmr1_ctrl_offset 24 + +/* Register rs_cnt_data, scope timer, type rs */ +#define reg_timer_rs_cnt_data___tmr___lsb 0 +#define reg_timer_rs_cnt_data___tmr___width 24 +#define reg_timer_rs_cnt_data___cnt___lsb 24 +#define reg_timer_rs_cnt_data___cnt___width 8 +#define reg_timer_rs_cnt_data_offset 32 + +/* Register r_cnt_data, scope timer, type r */ +#define reg_timer_r_cnt_data___tmr___lsb 0 +#define reg_timer_r_cnt_data___tmr___width 24 +#define reg_timer_r_cnt_data___cnt___lsb 24 +#define reg_timer_r_cnt_data___cnt___width 8 +#define reg_timer_r_cnt_data_offset 36 + +/* Register rw_cnt_cfg, scope timer, type rw */ +#define reg_timer_rw_cnt_cfg___clk___lsb 0 +#define reg_timer_rw_cnt_cfg___clk___width 2 +#define reg_timer_rw_cnt_cfg_offset 40 + +/* Register rw_trig, scope timer, type rw */ +#define reg_timer_rw_trig_offset 48 + +/* Register rw_trig_cfg, scope timer, type rw */ +#define reg_timer_rw_trig_cfg___tmr___lsb 0 +#define reg_timer_rw_trig_cfg___tmr___width 2 +#define reg_timer_rw_trig_cfg_offset 52 + +/* Register r_time, scope timer, type r */ +#define reg_timer_r_time_offset 56 + +/* Register rw_out, scope timer, type rw */ +#define reg_timer_rw_out___tmr___lsb 0 +#define reg_timer_rw_out___tmr___width 2 +#define reg_timer_rw_out_offset 60 + +/* Register rw_wd_ctrl, scope timer, type rw */ +#define reg_timer_rw_wd_ctrl___cnt___lsb 0 +#define reg_timer_rw_wd_ctrl___cnt___width 8 +#define reg_timer_rw_wd_ctrl___cmd___lsb 8 +#define reg_timer_rw_wd_ctrl___cmd___width 1 +#define reg_timer_rw_wd_ctrl___cmd___bit 8 +#define reg_timer_rw_wd_ctrl___key___lsb 9 +#define reg_timer_rw_wd_ctrl___key___width 7 +#define reg_timer_rw_wd_ctrl_offset 64 + +/* Register r_wd_stat, scope timer, type r */ +#define reg_timer_r_wd_stat___cnt___lsb 0 +#define reg_timer_r_wd_stat___cnt___width 8 +#define reg_timer_r_wd_stat___cmd___lsb 8 +#define reg_timer_r_wd_stat___cmd___width 1 +#define reg_timer_r_wd_stat___cmd___bit 8 +#define reg_timer_r_wd_stat_offset 68 + +/* Register rw_intr_mask, scope timer, type rw */ +#define reg_timer_rw_intr_mask___tmr0___lsb 0 +#define reg_timer_rw_intr_mask___tmr0___width 1 +#define reg_timer_rw_intr_mask___tmr0___bit 0 +#define reg_timer_rw_intr_mask___tmr1___lsb 1 +#define reg_timer_rw_intr_mask___tmr1___width 1 +#define reg_timer_rw_intr_mask___tmr1___bit 1 +#define reg_timer_rw_intr_mask___cnt___lsb 2 +#define reg_timer_rw_intr_mask___cnt___width 1 +#define reg_timer_rw_intr_mask___cnt___bit 2 +#define reg_timer_rw_intr_mask___trig___lsb 3 +#define reg_timer_rw_intr_mask___trig___width 1 +#define reg_timer_rw_intr_mask___trig___bit 3 +#define reg_timer_rw_intr_mask_offset 72 + +/* Register rw_ack_intr, scope timer, type rw */ +#define reg_timer_rw_ack_intr___tmr0___lsb 0 +#define reg_timer_rw_ack_intr___tmr0___width 1 +#define reg_timer_rw_ack_intr___tmr0___bit 0 +#define reg_timer_rw_ack_intr___tmr1___lsb 1 +#define reg_timer_rw_ack_intr___tmr1___width 1 +#define reg_timer_rw_ack_intr___tmr1___bit 1 +#define reg_timer_rw_ack_intr___cnt___lsb 2 +#define reg_timer_rw_ack_intr___cnt___width 1 +#define reg_timer_rw_ack_intr___cnt___bit 2 +#define reg_timer_rw_ack_intr___trig___lsb 3 +#define reg_timer_rw_ack_intr___trig___width 1 +#define reg_timer_rw_ack_intr___trig___bit 3 +#define reg_timer_rw_ack_intr_offset 76 + +/* Register r_intr, scope timer, type r */ +#define reg_timer_r_intr___tmr0___lsb 0 +#define reg_timer_r_intr___tmr0___width 1 +#define reg_timer_r_intr___tmr0___bit 0 +#define reg_timer_r_intr___tmr1___lsb 1 +#define reg_timer_r_intr___tmr1___width 1 +#define reg_timer_r_intr___tmr1___bit 1 +#define reg_timer_r_intr___cnt___lsb 2 +#define reg_timer_r_intr___cnt___width 1 +#define reg_timer_r_intr___cnt___bit 2 +#define reg_timer_r_intr___trig___lsb 3 +#define reg_timer_r_intr___trig___width 1 +#define reg_timer_r_intr___trig___bit 3 +#define reg_timer_r_intr_offset 80 + +/* Register r_masked_intr, scope timer, type r */ +#define reg_timer_r_masked_intr___tmr0___lsb 0 +#define reg_timer_r_masked_intr___tmr0___width 1 +#define reg_timer_r_masked_intr___tmr0___bit 0 +#define reg_timer_r_masked_intr___tmr1___lsb 1 +#define reg_timer_r_masked_intr___tmr1___width 1 +#define reg_timer_r_masked_intr___tmr1___bit 1 +#define reg_timer_r_masked_intr___cnt___lsb 2 +#define reg_timer_r_masked_intr___cnt___width 1 +#define reg_timer_r_masked_intr___cnt___bit 2 +#define reg_timer_r_masked_intr___trig___lsb 3 +#define reg_timer_r_masked_intr___trig___width 1 +#define reg_timer_r_masked_intr___trig___bit 3 +#define reg_timer_r_masked_intr_offset 84 + +/* Register rw_test, scope timer, type rw */ +#define reg_timer_rw_test___dis___lsb 0 +#define reg_timer_rw_test___dis___width 1 +#define reg_timer_rw_test___dis___bit 0 +#define reg_timer_rw_test___en___lsb 1 +#define reg_timer_rw_test___en___width 1 +#define reg_timer_rw_test___en___bit 1 +#define reg_timer_rw_test_offset 88 + + +/* Constants */ +#define regk_timer_ext 0x00000001 +#define regk_timer_f100 0x00000007 +#define regk_timer_f29_493 0x00000004 +#define regk_timer_f32 0x00000005 +#define regk_timer_f32_768 0x00000006 +#define regk_timer_hold 0x00000001 +#define regk_timer_ld 0x00000000 +#define regk_timer_no 0x00000000 +#define regk_timer_off 0x00000000 +#define regk_timer_run 0x00000002 +#define regk_timer_rw_cnt_cfg_default 0x00000000 +#define regk_timer_rw_intr_mask_default 0x00000000 +#define regk_timer_rw_out_default 0x00000000 +#define regk_timer_rw_test_default 0x00000000 +#define regk_timer_rw_tmr0_ctrl_default 0x00000000 +#define regk_timer_rw_tmr1_ctrl_default 0x00000000 +#define regk_timer_rw_trig_cfg_default 0x00000000 +#define regk_timer_start 0x00000001 +#define regk_timer_stop 0x00000000 +#define regk_timer_time 0x00000001 +#define regk_timer_tmr0 0x00000002 +#define regk_timer_tmr1 0x00000003 +#define regk_timer_yes 0x00000001 +#endif /* __timer_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/bif_core_defs.h b/include/asm-cris/arch-v32/mach-fs/hwregs/bif_core_defs.h new file mode 100644 index 000000000000..44362a62b47c --- /dev/null +++ b/include/asm-cris/arch-v32/mach-fs/hwregs/bif_core_defs.h @@ -0,0 +1,284 @@ +#ifndef __bif_core_defs_h +#define __bif_core_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/bif/rtl/bif_core_regs.r + * id: bif_core_regs.r,v 1.17 2005/02/04 13:28:22 np Exp + * last modfied: Mon Apr 11 16:06:33 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile bif_core_defs.h ../../inst/bif/rtl/bif_core_regs.r + * id: $Id: bif_core_defs.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope bif_core */ + +/* Register rw_grp1_cfg, scope bif_core, type rw */ +typedef struct { + unsigned int lw : 6; + unsigned int ew : 3; + unsigned int zw : 3; + unsigned int aw : 2; + unsigned int dw : 2; + unsigned int ewb : 2; + unsigned int bw : 1; + unsigned int wr_extend : 1; + unsigned int erc_en : 1; + unsigned int mode : 1; + unsigned int dummy1 : 10; +} reg_bif_core_rw_grp1_cfg; +#define REG_RD_ADDR_bif_core_rw_grp1_cfg 0 +#define REG_WR_ADDR_bif_core_rw_grp1_cfg 0 + +/* Register rw_grp2_cfg, scope bif_core, type rw */ +typedef struct { + unsigned int lw : 6; + unsigned int ew : 3; + unsigned int zw : 3; + unsigned int aw : 2; + unsigned int dw : 2; + unsigned int ewb : 2; + unsigned int bw : 1; + unsigned int wr_extend : 1; + unsigned int erc_en : 1; + unsigned int mode : 1; + unsigned int dummy1 : 10; +} reg_bif_core_rw_grp2_cfg; +#define REG_RD_ADDR_bif_core_rw_grp2_cfg 4 +#define REG_WR_ADDR_bif_core_rw_grp2_cfg 4 + +/* Register rw_grp3_cfg, scope bif_core, type rw */ +typedef struct { + unsigned int lw : 6; + unsigned int ew : 3; + unsigned int zw : 3; + unsigned int aw : 2; + unsigned int dw : 2; + unsigned int ewb : 2; + unsigned int bw : 1; + unsigned int wr_extend : 1; + unsigned int erc_en : 1; + unsigned int mode : 1; + unsigned int dummy1 : 2; + unsigned int gated_csp0 : 2; + unsigned int gated_csp1 : 2; + unsigned int gated_csp2 : 2; + unsigned int gated_csp3 : 2; +} reg_bif_core_rw_grp3_cfg; +#define REG_RD_ADDR_bif_core_rw_grp3_cfg 8 +#define REG_WR_ADDR_bif_core_rw_grp3_cfg 8 + +/* Register rw_grp4_cfg, scope bif_core, type rw */ +typedef struct { + unsigned int lw : 6; + unsigned int ew : 3; + unsigned int zw : 3; + unsigned int aw : 2; + unsigned int dw : 2; + unsigned int ewb : 2; + unsigned int bw : 1; + unsigned int wr_extend : 1; + unsigned int erc_en : 1; + unsigned int mode : 1; + unsigned int dummy1 : 4; + unsigned int gated_csp4 : 2; + unsigned int gated_csp5 : 2; + unsigned int gated_csp6 : 2; +} reg_bif_core_rw_grp4_cfg; +#define REG_RD_ADDR_bif_core_rw_grp4_cfg 12 +#define REG_WR_ADDR_bif_core_rw_grp4_cfg 12 + +/* Register rw_sdram_cfg_grp0, scope bif_core, type rw */ +typedef struct { + unsigned int bank_sel : 5; + unsigned int ca : 3; + unsigned int type : 1; + unsigned int bw : 1; + unsigned int sh : 3; + unsigned int wmm : 1; + unsigned int sh16 : 1; + unsigned int grp_sel : 5; + unsigned int dummy1 : 12; +} reg_bif_core_rw_sdram_cfg_grp0; +#define REG_RD_ADDR_bif_core_rw_sdram_cfg_grp0 16 +#define REG_WR_ADDR_bif_core_rw_sdram_cfg_grp0 16 + +/* Register rw_sdram_cfg_grp1, scope bif_core, type rw */ +typedef struct { + unsigned int bank_sel : 5; + unsigned int ca : 3; + unsigned int type : 1; + unsigned int bw : 1; + unsigned int sh : 3; + unsigned int wmm : 1; + unsigned int sh16 : 1; + unsigned int dummy1 : 17; +} reg_bif_core_rw_sdram_cfg_grp1; +#define REG_RD_ADDR_bif_core_rw_sdram_cfg_grp1 20 +#define REG_WR_ADDR_bif_core_rw_sdram_cfg_grp1 20 + +/* Register rw_sdram_timing, scope bif_core, type rw */ +typedef struct { + unsigned int cl : 3; + unsigned int rcd : 3; + unsigned int rp : 3; + unsigned int rc : 2; + unsigned int dpl : 2; + unsigned int pde : 1; + unsigned int ref : 2; + unsigned int cpd : 1; + unsigned int sdcke : 1; + unsigned int sdclk : 1; + unsigned int dummy1 : 13; +} reg_bif_core_rw_sdram_timing; +#define REG_RD_ADDR_bif_core_rw_sdram_timing 24 +#define REG_WR_ADDR_bif_core_rw_sdram_timing 24 + +/* Register rw_sdram_cmd, scope bif_core, type rw */ +typedef struct { + unsigned int cmd : 3; + unsigned int mrs_data : 15; + unsigned int dummy1 : 14; +} reg_bif_core_rw_sdram_cmd; +#define REG_RD_ADDR_bif_core_rw_sdram_cmd 28 +#define REG_WR_ADDR_bif_core_rw_sdram_cmd 28 + +/* Register rs_sdram_ref_stat, scope bif_core, type rs */ +typedef struct { + unsigned int ok : 1; + unsigned int dummy1 : 31; +} reg_bif_core_rs_sdram_ref_stat; +#define REG_RD_ADDR_bif_core_rs_sdram_ref_stat 32 + +/* Register r_sdram_ref_stat, scope bif_core, type r */ +typedef struct { + unsigned int ok : 1; + unsigned int dummy1 : 31; +} reg_bif_core_r_sdram_ref_stat; +#define REG_RD_ADDR_bif_core_r_sdram_ref_stat 36 + + +/* Constants */ +enum { + regk_bif_core_bank2 = 0x00000000, + regk_bif_core_bank4 = 0x00000001, + regk_bif_core_bit10 = 0x0000000a, + regk_bif_core_bit11 = 0x0000000b, + regk_bif_core_bit12 = 0x0000000c, + regk_bif_core_bit13 = 0x0000000d, + regk_bif_core_bit14 = 0x0000000e, + regk_bif_core_bit15 = 0x0000000f, + regk_bif_core_bit16 = 0x00000010, + regk_bif_core_bit17 = 0x00000011, + regk_bif_core_bit18 = 0x00000012, + regk_bif_core_bit19 = 0x00000013, + regk_bif_core_bit20 = 0x00000014, + regk_bif_core_bit21 = 0x00000015, + regk_bif_core_bit22 = 0x00000016, + regk_bif_core_bit23 = 0x00000017, + regk_bif_core_bit24 = 0x00000018, + regk_bif_core_bit25 = 0x00000019, + regk_bif_core_bit26 = 0x0000001a, + regk_bif_core_bit27 = 0x0000001b, + regk_bif_core_bit28 = 0x0000001c, + regk_bif_core_bit29 = 0x0000001d, + regk_bif_core_bit9 = 0x00000009, + regk_bif_core_bw16 = 0x00000001, + regk_bif_core_bw32 = 0x00000000, + regk_bif_core_bwe = 0x00000000, + regk_bif_core_cwe = 0x00000001, + regk_bif_core_e15us = 0x00000001, + regk_bif_core_e7800ns = 0x00000002, + regk_bif_core_grp0 = 0x00000000, + regk_bif_core_grp1 = 0x00000001, + regk_bif_core_mrs = 0x00000003, + regk_bif_core_no = 0x00000000, + regk_bif_core_none = 0x00000000, + regk_bif_core_nop = 0x00000000, + regk_bif_core_off = 0x00000000, + regk_bif_core_pre = 0x00000002, + regk_bif_core_r_sdram_ref_stat_default = 0x00000001, + regk_bif_core_rd = 0x00000002, + regk_bif_core_ref = 0x00000001, + regk_bif_core_rs_sdram_ref_stat_default = 0x00000001, + regk_bif_core_rw_grp1_cfg_default = 0x000006cf, + regk_bif_core_rw_grp2_cfg_default = 0x000006cf, + regk_bif_core_rw_grp3_cfg_default = 0x000006cf, + regk_bif_core_rw_grp4_cfg_default = 0x000006cf, + regk_bif_core_rw_sdram_cfg_grp1_default = 0x00000000, + regk_bif_core_slf = 0x00000004, + regk_bif_core_wr = 0x00000001, + regk_bif_core_yes = 0x00000001 +}; +#endif /* __bif_core_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/bif_dma_defs.h b/include/asm-cris/arch-v32/mach-fs/hwregs/bif_dma_defs.h new file mode 100644 index 000000000000..3cb51a09dba7 --- /dev/null +++ b/include/asm-cris/arch-v32/mach-fs/hwregs/bif_dma_defs.h @@ -0,0 +1,473 @@ +#ifndef __bif_dma_defs_h +#define __bif_dma_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/bif/rtl/bif_dma_regs.r + * id: bif_dma_regs.r,v 1.6 2005/02/04 13:28:31 perz Exp + * last modfied: Mon Apr 11 16:06:33 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile bif_dma_defs.h ../../inst/bif/rtl/bif_dma_regs.r + * id: $Id: bif_dma_defs.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope bif_dma */ + +/* Register rw_ch0_ctrl, scope bif_dma, type rw */ +typedef struct { + unsigned int bw : 2; + unsigned int burst_len : 1; + unsigned int cont : 1; + unsigned int end_pad : 1; + unsigned int cnt : 1; + unsigned int dreq_pin : 3; + unsigned int dreq_mode : 2; + unsigned int tc_in_pin : 3; + unsigned int tc_in_mode : 2; + unsigned int bus_mode : 2; + unsigned int rate_en : 1; + unsigned int wr_all : 1; + unsigned int dummy1 : 12; +} reg_bif_dma_rw_ch0_ctrl; +#define REG_RD_ADDR_bif_dma_rw_ch0_ctrl 0 +#define REG_WR_ADDR_bif_dma_rw_ch0_ctrl 0 + +/* Register rw_ch0_addr, scope bif_dma, type rw */ +typedef struct { + unsigned int addr : 32; +} reg_bif_dma_rw_ch0_addr; +#define REG_RD_ADDR_bif_dma_rw_ch0_addr 4 +#define REG_WR_ADDR_bif_dma_rw_ch0_addr 4 + +/* Register rw_ch0_start, scope bif_dma, type rw */ +typedef struct { + unsigned int run : 1; + unsigned int dummy1 : 31; +} reg_bif_dma_rw_ch0_start; +#define REG_RD_ADDR_bif_dma_rw_ch0_start 8 +#define REG_WR_ADDR_bif_dma_rw_ch0_start 8 + +/* Register rw_ch0_cnt, scope bif_dma, type rw */ +typedef struct { + unsigned int start_cnt : 16; + unsigned int dummy1 : 16; +} reg_bif_dma_rw_ch0_cnt; +#define REG_RD_ADDR_bif_dma_rw_ch0_cnt 12 +#define REG_WR_ADDR_bif_dma_rw_ch0_cnt 12 + +/* Register r_ch0_stat, scope bif_dma, type r */ +typedef struct { + unsigned int cnt : 16; + unsigned int dummy1 : 15; + unsigned int run : 1; +} reg_bif_dma_r_ch0_stat; +#define REG_RD_ADDR_bif_dma_r_ch0_stat 16 + +/* Register rw_ch1_ctrl, scope bif_dma, type rw */ +typedef struct { + unsigned int bw : 2; + unsigned int burst_len : 1; + unsigned int cont : 1; + unsigned int end_discard : 1; + unsigned int cnt : 1; + unsigned int dreq_pin : 3; + unsigned int dreq_mode : 2; + unsigned int tc_in_pin : 3; + unsigned int tc_in_mode : 2; + unsigned int bus_mode : 2; + unsigned int rate_en : 1; + unsigned int dummy1 : 13; +} reg_bif_dma_rw_ch1_ctrl; +#define REG_RD_ADDR_bif_dma_rw_ch1_ctrl 32 +#define REG_WR_ADDR_bif_dma_rw_ch1_ctrl 32 + +/* Register rw_ch1_addr, scope bif_dma, type rw */ +typedef struct { + unsigned int addr : 32; +} reg_bif_dma_rw_ch1_addr; +#define REG_RD_ADDR_bif_dma_rw_ch1_addr 36 +#define REG_WR_ADDR_bif_dma_rw_ch1_addr 36 + +/* Register rw_ch1_start, scope bif_dma, type rw */ +typedef struct { + unsigned int run : 1; + unsigned int dummy1 : 31; +} reg_bif_dma_rw_ch1_start; +#define REG_RD_ADDR_bif_dma_rw_ch1_start 40 +#define REG_WR_ADDR_bif_dma_rw_ch1_start 40 + +/* Register rw_ch1_cnt, scope bif_dma, type rw */ +typedef struct { + unsigned int start_cnt : 16; + unsigned int dummy1 : 16; +} reg_bif_dma_rw_ch1_cnt; +#define REG_RD_ADDR_bif_dma_rw_ch1_cnt 44 +#define REG_WR_ADDR_bif_dma_rw_ch1_cnt 44 + +/* Register r_ch1_stat, scope bif_dma, type r */ +typedef struct { + unsigned int cnt : 16; + unsigned int dummy1 : 15; + unsigned int run : 1; +} reg_bif_dma_r_ch1_stat; +#define REG_RD_ADDR_bif_dma_r_ch1_stat 48 + +/* Register rw_ch2_ctrl, scope bif_dma, type rw */ +typedef struct { + unsigned int bw : 2; + unsigned int burst_len : 1; + unsigned int cont : 1; + unsigned int end_pad : 1; + unsigned int cnt : 1; + unsigned int dreq_pin : 3; + unsigned int dreq_mode : 2; + unsigned int tc_in_pin : 3; + unsigned int tc_in_mode : 2; + unsigned int bus_mode : 2; + unsigned int rate_en : 1; + unsigned int wr_all : 1; + unsigned int dummy1 : 12; +} reg_bif_dma_rw_ch2_ctrl; +#define REG_RD_ADDR_bif_dma_rw_ch2_ctrl 64 +#define REG_WR_ADDR_bif_dma_rw_ch2_ctrl 64 + +/* Register rw_ch2_addr, scope bif_dma, type rw */ +typedef struct { + unsigned int addr : 32; +} reg_bif_dma_rw_ch2_addr; +#define REG_RD_ADDR_bif_dma_rw_ch2_addr 68 +#define REG_WR_ADDR_bif_dma_rw_ch2_addr 68 + +/* Register rw_ch2_start, scope bif_dma, type rw */ +typedef struct { + unsigned int run : 1; + unsigned int dummy1 : 31; +} reg_bif_dma_rw_ch2_start; +#define REG_RD_ADDR_bif_dma_rw_ch2_start 72 +#define REG_WR_ADDR_bif_dma_rw_ch2_start 72 + +/* Register rw_ch2_cnt, scope bif_dma, type rw */ +typedef struct { + unsigned int start_cnt : 16; + unsigned int dummy1 : 16; +} reg_bif_dma_rw_ch2_cnt; +#define REG_RD_ADDR_bif_dma_rw_ch2_cnt 76 +#define REG_WR_ADDR_bif_dma_rw_ch2_cnt 76 + +/* Register r_ch2_stat, scope bif_dma, type r */ +typedef struct { + unsigned int cnt : 16; + unsigned int dummy1 : 15; + unsigned int run : 1; +} reg_bif_dma_r_ch2_stat; +#define REG_RD_ADDR_bif_dma_r_ch2_stat 80 + +/* Register rw_ch3_ctrl, scope bif_dma, type rw */ +typedef struct { + unsigned int bw : 2; + unsigned int burst_len : 1; + unsigned int cont : 1; + unsigned int end_discard : 1; + unsigned int cnt : 1; + unsigned int dreq_pin : 3; + unsigned int dreq_mode : 2; + unsigned int tc_in_pin : 3; + unsigned int tc_in_mode : 2; + unsigned int bus_mode : 2; + unsigned int rate_en : 1; + unsigned int dummy1 : 13; +} reg_bif_dma_rw_ch3_ctrl; +#define REG_RD_ADDR_bif_dma_rw_ch3_ctrl 96 +#define REG_WR_ADDR_bif_dma_rw_ch3_ctrl 96 + +/* Register rw_ch3_addr, scope bif_dma, type rw */ +typedef struct { + unsigned int addr : 32; +} reg_bif_dma_rw_ch3_addr; +#define REG_RD_ADDR_bif_dma_rw_ch3_addr 100 +#define REG_WR_ADDR_bif_dma_rw_ch3_addr 100 + +/* Register rw_ch3_start, scope bif_dma, type rw */ +typedef struct { + unsigned int run : 1; + unsigned int dummy1 : 31; +} reg_bif_dma_rw_ch3_start; +#define REG_RD_ADDR_bif_dma_rw_ch3_start 104 +#define REG_WR_ADDR_bif_dma_rw_ch3_start 104 + +/* Register rw_ch3_cnt, scope bif_dma, type rw */ +typedef struct { + unsigned int start_cnt : 16; + unsigned int dummy1 : 16; +} reg_bif_dma_rw_ch3_cnt; +#define REG_RD_ADDR_bif_dma_rw_ch3_cnt 108 +#define REG_WR_ADDR_bif_dma_rw_ch3_cnt 108 + +/* Register r_ch3_stat, scope bif_dma, type r */ +typedef struct { + unsigned int cnt : 16; + unsigned int dummy1 : 15; + unsigned int run : 1; +} reg_bif_dma_r_ch3_stat; +#define REG_RD_ADDR_bif_dma_r_ch3_stat 112 + +/* Register rw_intr_mask, scope bif_dma, type rw */ +typedef struct { + unsigned int ext_dma0 : 1; + unsigned int ext_dma1 : 1; + unsigned int ext_dma2 : 1; + unsigned int ext_dma3 : 1; + unsigned int dummy1 : 28; +} reg_bif_dma_rw_intr_mask; +#define REG_RD_ADDR_bif_dma_rw_intr_mask 128 +#define REG_WR_ADDR_bif_dma_rw_intr_mask 128 + +/* Register rw_ack_intr, scope bif_dma, type rw */ +typedef struct { + unsigned int ext_dma0 : 1; + unsigned int ext_dma1 : 1; + unsigned int ext_dma2 : 1; + unsigned int ext_dma3 : 1; + unsigned int dummy1 : 28; +} reg_bif_dma_rw_ack_intr; +#define REG_RD_ADDR_bif_dma_rw_ack_intr 132 +#define REG_WR_ADDR_bif_dma_rw_ack_intr 132 + +/* Register r_intr, scope bif_dma, type r */ +typedef struct { + unsigned int ext_dma0 : 1; + unsigned int ext_dma1 : 1; + unsigned int ext_dma2 : 1; + unsigned int ext_dma3 : 1; + unsigned int dummy1 : 28; +} reg_bif_dma_r_intr; +#define REG_RD_ADDR_bif_dma_r_intr 136 + +/* Register r_masked_intr, scope bif_dma, type r */ +typedef struct { + unsigned int ext_dma0 : 1; + unsigned int ext_dma1 : 1; + unsigned int ext_dma2 : 1; + unsigned int ext_dma3 : 1; + unsigned int dummy1 : 28; +} reg_bif_dma_r_masked_intr; +#define REG_RD_ADDR_bif_dma_r_masked_intr 140 + +/* Register rw_pin0_cfg, scope bif_dma, type rw */ +typedef struct { + unsigned int master_ch : 2; + unsigned int master_mode : 3; + unsigned int slave_ch : 2; + unsigned int slave_mode : 3; + unsigned int dummy1 : 22; +} reg_bif_dma_rw_pin0_cfg; +#define REG_RD_ADDR_bif_dma_rw_pin0_cfg 160 +#define REG_WR_ADDR_bif_dma_rw_pin0_cfg 160 + +/* Register rw_pin1_cfg, scope bif_dma, type rw */ +typedef struct { + unsigned int master_ch : 2; + unsigned int master_mode : 3; + unsigned int slave_ch : 2; + unsigned int slave_mode : 3; + unsigned int dummy1 : 22; +} reg_bif_dma_rw_pin1_cfg; +#define REG_RD_ADDR_bif_dma_rw_pin1_cfg 164 +#define REG_WR_ADDR_bif_dma_rw_pin1_cfg 164 + +/* Register rw_pin2_cfg, scope bif_dma, type rw */ +typedef struct { + unsigned int master_ch : 2; + unsigned int master_mode : 3; + unsigned int slave_ch : 2; + unsigned int slave_mode : 3; + unsigned int dummy1 : 22; +} reg_bif_dma_rw_pin2_cfg; +#define REG_RD_ADDR_bif_dma_rw_pin2_cfg 168 +#define REG_WR_ADDR_bif_dma_rw_pin2_cfg 168 + +/* Register rw_pin3_cfg, scope bif_dma, type rw */ +typedef struct { + unsigned int master_ch : 2; + unsigned int master_mode : 3; + unsigned int slave_ch : 2; + unsigned int slave_mode : 3; + unsigned int dummy1 : 22; +} reg_bif_dma_rw_pin3_cfg; +#define REG_RD_ADDR_bif_dma_rw_pin3_cfg 172 +#define REG_WR_ADDR_bif_dma_rw_pin3_cfg 172 + +/* Register rw_pin4_cfg, scope bif_dma, type rw */ +typedef struct { + unsigned int master_ch : 2; + unsigned int master_mode : 3; + unsigned int slave_ch : 2; + unsigned int slave_mode : 3; + unsigned int dummy1 : 22; +} reg_bif_dma_rw_pin4_cfg; +#define REG_RD_ADDR_bif_dma_rw_pin4_cfg 176 +#define REG_WR_ADDR_bif_dma_rw_pin4_cfg 176 + +/* Register rw_pin5_cfg, scope bif_dma, type rw */ +typedef struct { + unsigned int master_ch : 2; + unsigned int master_mode : 3; + unsigned int slave_ch : 2; + unsigned int slave_mode : 3; + unsigned int dummy1 : 22; +} reg_bif_dma_rw_pin5_cfg; +#define REG_RD_ADDR_bif_dma_rw_pin5_cfg 180 +#define REG_WR_ADDR_bif_dma_rw_pin5_cfg 180 + +/* Register rw_pin6_cfg, scope bif_dma, type rw */ +typedef struct { + unsigned int master_ch : 2; + unsigned int master_mode : 3; + unsigned int slave_ch : 2; + unsigned int slave_mode : 3; + unsigned int dummy1 : 22; +} reg_bif_dma_rw_pin6_cfg; +#define REG_RD_ADDR_bif_dma_rw_pin6_cfg 184 +#define REG_WR_ADDR_bif_dma_rw_pin6_cfg 184 + +/* Register rw_pin7_cfg, scope bif_dma, type rw */ +typedef struct { + unsigned int master_ch : 2; + unsigned int master_mode : 3; + unsigned int slave_ch : 2; + unsigned int slave_mode : 3; + unsigned int dummy1 : 22; +} reg_bif_dma_rw_pin7_cfg; +#define REG_RD_ADDR_bif_dma_rw_pin7_cfg 188 +#define REG_WR_ADDR_bif_dma_rw_pin7_cfg 188 + +/* Register r_pin_stat, scope bif_dma, type r */ +typedef struct { + unsigned int pin0 : 1; + unsigned int pin1 : 1; + unsigned int pin2 : 1; + unsigned int pin3 : 1; + unsigned int pin4 : 1; + unsigned int pin5 : 1; + unsigned int pin6 : 1; + unsigned int pin7 : 1; + unsigned int dummy1 : 24; +} reg_bif_dma_r_pin_stat; +#define REG_RD_ADDR_bif_dma_r_pin_stat 192 + + +/* Constants */ +enum { + regk_bif_dma_as_master = 0x00000001, + regk_bif_dma_as_slave = 0x00000001, + regk_bif_dma_burst1 = 0x00000000, + regk_bif_dma_burst8 = 0x00000001, + regk_bif_dma_bw16 = 0x00000001, + regk_bif_dma_bw32 = 0x00000002, + regk_bif_dma_bw8 = 0x00000000, + regk_bif_dma_dack = 0x00000006, + regk_bif_dma_dack_inv = 0x00000007, + regk_bif_dma_force = 0x00000001, + regk_bif_dma_hi = 0x00000003, + regk_bif_dma_inv = 0x00000003, + regk_bif_dma_lo = 0x00000002, + regk_bif_dma_master = 0x00000001, + regk_bif_dma_no = 0x00000000, + regk_bif_dma_norm = 0x00000002, + regk_bif_dma_off = 0x00000000, + regk_bif_dma_rw_ch0_ctrl_default = 0x00000000, + regk_bif_dma_rw_ch0_start_default = 0x00000000, + regk_bif_dma_rw_ch1_ctrl_default = 0x00000000, + regk_bif_dma_rw_ch1_start_default = 0x00000000, + regk_bif_dma_rw_ch2_ctrl_default = 0x00000000, + regk_bif_dma_rw_ch2_start_default = 0x00000000, + regk_bif_dma_rw_ch3_ctrl_default = 0x00000000, + regk_bif_dma_rw_ch3_start_default = 0x00000000, + regk_bif_dma_rw_intr_mask_default = 0x00000000, + regk_bif_dma_rw_pin0_cfg_default = 0x00000000, + regk_bif_dma_rw_pin1_cfg_default = 0x00000000, + regk_bif_dma_rw_pin2_cfg_default = 0x00000000, + regk_bif_dma_rw_pin3_cfg_default = 0x00000000, + regk_bif_dma_rw_pin4_cfg_default = 0x00000000, + regk_bif_dma_rw_pin5_cfg_default = 0x00000000, + regk_bif_dma_rw_pin6_cfg_default = 0x00000000, + regk_bif_dma_rw_pin7_cfg_default = 0x00000000, + regk_bif_dma_slave = 0x00000002, + regk_bif_dma_sreq = 0x00000006, + regk_bif_dma_sreq_inv = 0x00000007, + regk_bif_dma_tc = 0x00000004, + regk_bif_dma_tc_inv = 0x00000005, + regk_bif_dma_yes = 0x00000001 +}; +#endif /* __bif_dma_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/bif_slave_defs.h b/include/asm-cris/arch-v32/mach-fs/hwregs/bif_slave_defs.h new file mode 100644 index 000000000000..0c434585a3f9 --- /dev/null +++ b/include/asm-cris/arch-v32/mach-fs/hwregs/bif_slave_defs.h @@ -0,0 +1,249 @@ +#ifndef __bif_slave_defs_h +#define __bif_slave_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/bif/rtl/bif_slave_regs.r + * id: bif_slave_regs.r,v 1.5 2005/02/04 13:55:28 perz Exp + * last modfied: Mon Apr 11 16:06:34 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile bif_slave_defs.h ../../inst/bif/rtl/bif_slave_regs.r + * id: $Id: bif_slave_defs.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope bif_slave */ + +/* Register rw_slave_cfg, scope bif_slave, type rw */ +typedef struct { + unsigned int slave_id : 3; + unsigned int use_slave_id : 1; + unsigned int boot_rdy : 1; + unsigned int loopback : 1; + unsigned int dis : 1; + unsigned int dummy1 : 25; +} reg_bif_slave_rw_slave_cfg; +#define REG_RD_ADDR_bif_slave_rw_slave_cfg 0 +#define REG_WR_ADDR_bif_slave_rw_slave_cfg 0 + +/* Register r_slave_mode, scope bif_slave, type r */ +typedef struct { + unsigned int ch0_mode : 1; + unsigned int ch1_mode : 1; + unsigned int ch2_mode : 1; + unsigned int ch3_mode : 1; + unsigned int dummy1 : 28; +} reg_bif_slave_r_slave_mode; +#define REG_RD_ADDR_bif_slave_r_slave_mode 4 + +/* Register rw_ch0_cfg, scope bif_slave, type rw */ +typedef struct { + unsigned int rd_hold : 2; + unsigned int access_mode : 1; + unsigned int access_ctrl : 1; + unsigned int data_cs : 2; + unsigned int dummy1 : 26; +} reg_bif_slave_rw_ch0_cfg; +#define REG_RD_ADDR_bif_slave_rw_ch0_cfg 16 +#define REG_WR_ADDR_bif_slave_rw_ch0_cfg 16 + +/* Register rw_ch1_cfg, scope bif_slave, type rw */ +typedef struct { + unsigned int rd_hold : 2; + unsigned int access_mode : 1; + unsigned int access_ctrl : 1; + unsigned int data_cs : 2; + unsigned int dummy1 : 26; +} reg_bif_slave_rw_ch1_cfg; +#define REG_RD_ADDR_bif_slave_rw_ch1_cfg 20 +#define REG_WR_ADDR_bif_slave_rw_ch1_cfg 20 + +/* Register rw_ch2_cfg, scope bif_slave, type rw */ +typedef struct { + unsigned int rd_hold : 2; + unsigned int access_mode : 1; + unsigned int access_ctrl : 1; + unsigned int data_cs : 2; + unsigned int dummy1 : 26; +} reg_bif_slave_rw_ch2_cfg; +#define REG_RD_ADDR_bif_slave_rw_ch2_cfg 24 +#define REG_WR_ADDR_bif_slave_rw_ch2_cfg 24 + +/* Register rw_ch3_cfg, scope bif_slave, type rw */ +typedef struct { + unsigned int rd_hold : 2; + unsigned int access_mode : 1; + unsigned int access_ctrl : 1; + unsigned int data_cs : 2; + unsigned int dummy1 : 26; +} reg_bif_slave_rw_ch3_cfg; +#define REG_RD_ADDR_bif_slave_rw_ch3_cfg 28 +#define REG_WR_ADDR_bif_slave_rw_ch3_cfg 28 + +/* Register rw_arb_cfg, scope bif_slave, type rw */ +typedef struct { + unsigned int brin_mode : 1; + unsigned int brout_mode : 3; + unsigned int bg_mode : 3; + unsigned int release : 2; + unsigned int acquire : 1; + unsigned int settle_time : 2; + unsigned int dram_ctrl : 1; + unsigned int dummy1 : 19; +} reg_bif_slave_rw_arb_cfg; +#define REG_RD_ADDR_bif_slave_rw_arb_cfg 32 +#define REG_WR_ADDR_bif_slave_rw_arb_cfg 32 + +/* Register r_arb_stat, scope bif_slave, type r */ +typedef struct { + unsigned int init_mode : 1; + unsigned int mode : 1; + unsigned int brin : 1; + unsigned int brout : 1; + unsigned int bg : 1; + unsigned int dummy1 : 27; +} reg_bif_slave_r_arb_stat; +#define REG_RD_ADDR_bif_slave_r_arb_stat 36 + +/* Register rw_intr_mask, scope bif_slave, type rw */ +typedef struct { + unsigned int bus_release : 1; + unsigned int bus_acquire : 1; + unsigned int dummy1 : 30; +} reg_bif_slave_rw_intr_mask; +#define REG_RD_ADDR_bif_slave_rw_intr_mask 64 +#define REG_WR_ADDR_bif_slave_rw_intr_mask 64 + +/* Register rw_ack_intr, scope bif_slave, type rw */ +typedef struct { + unsigned int bus_release : 1; + unsigned int bus_acquire : 1; + unsigned int dummy1 : 30; +} reg_bif_slave_rw_ack_intr; +#define REG_RD_ADDR_bif_slave_rw_ack_intr 68 +#define REG_WR_ADDR_bif_slave_rw_ack_intr 68 + +/* Register r_intr, scope bif_slave, type r */ +typedef struct { + unsigned int bus_release : 1; + unsigned int bus_acquire : 1; + unsigned int dummy1 : 30; +} reg_bif_slave_r_intr; +#define REG_RD_ADDR_bif_slave_r_intr 72 + +/* Register r_masked_intr, scope bif_slave, type r */ +typedef struct { + unsigned int bus_release : 1; + unsigned int bus_acquire : 1; + unsigned int dummy1 : 30; +} reg_bif_slave_r_masked_intr; +#define REG_RD_ADDR_bif_slave_r_masked_intr 76 + + +/* Constants */ +enum { + regk_bif_slave_active_hi = 0x00000003, + regk_bif_slave_active_lo = 0x00000002, + regk_bif_slave_addr = 0x00000000, + regk_bif_slave_always = 0x00000001, + regk_bif_slave_at_idle = 0x00000002, + regk_bif_slave_burst_end = 0x00000003, + regk_bif_slave_dma = 0x00000001, + regk_bif_slave_hi = 0x00000003, + regk_bif_slave_inv = 0x00000001, + regk_bif_slave_lo = 0x00000002, + regk_bif_slave_local = 0x00000001, + regk_bif_slave_master = 0x00000000, + regk_bif_slave_mode_reg = 0x00000001, + regk_bif_slave_no = 0x00000000, + regk_bif_slave_norm = 0x00000000, + regk_bif_slave_on_access = 0x00000000, + regk_bif_slave_rw_arb_cfg_default = 0x00000000, + regk_bif_slave_rw_ch0_cfg_default = 0x00000000, + regk_bif_slave_rw_ch1_cfg_default = 0x00000000, + regk_bif_slave_rw_ch2_cfg_default = 0x00000000, + regk_bif_slave_rw_ch3_cfg_default = 0x00000000, + regk_bif_slave_rw_intr_mask_default = 0x00000000, + regk_bif_slave_rw_slave_cfg_default = 0x00000000, + regk_bif_slave_shared = 0x00000000, + regk_bif_slave_slave = 0x00000001, + regk_bif_slave_t0ns = 0x00000003, + regk_bif_slave_t10ns = 0x00000002, + regk_bif_slave_t20ns = 0x00000003, + regk_bif_slave_t30ns = 0x00000002, + regk_bif_slave_t40ns = 0x00000001, + regk_bif_slave_t50ns = 0x00000000, + regk_bif_slave_yes = 0x00000001, + regk_bif_slave_z = 0x00000004 +}; +#endif /* __bif_slave_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/config_defs.h b/include/asm-cris/arch-v32/mach-fs/hwregs/config_defs.h new file mode 100644 index 000000000000..abc5f20705f7 --- /dev/null +++ b/include/asm-cris/arch-v32/mach-fs/hwregs/config_defs.h @@ -0,0 +1,142 @@ +#ifndef __config_defs_h +#define __config_defs_h + +/* + * This file is autogenerated from + * file: ../../rtl/config_regs.r + * id: config_regs.r,v 1.23 2004/03/04 11:34:42 mikaeln Exp + * last modfied: Thu Mar 4 12:34:39 2004 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile config_defs.h ../../rtl/config_regs.r + * id: $Id: config_defs.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope config */ + +/* Register r_bootsel, scope config, type r */ +typedef struct { + unsigned int boot_mode : 3; + unsigned int full_duplex : 1; + unsigned int user : 1; + unsigned int pll : 1; + unsigned int flash_bw : 1; + unsigned int dummy1 : 25; +} reg_config_r_bootsel; +#define REG_RD_ADDR_config_r_bootsel 0 + +/* Register rw_clk_ctrl, scope config, type rw */ +typedef struct { + unsigned int pll : 1; + unsigned int cpu : 1; + unsigned int iop : 1; + unsigned int dma01_eth0 : 1; + unsigned int dma23 : 1; + unsigned int dma45 : 1; + unsigned int dma67 : 1; + unsigned int dma89_strcop : 1; + unsigned int bif : 1; + unsigned int fix_io : 1; + unsigned int dummy1 : 22; +} reg_config_rw_clk_ctrl; +#define REG_RD_ADDR_config_rw_clk_ctrl 4 +#define REG_WR_ADDR_config_rw_clk_ctrl 4 + +/* Register rw_pad_ctrl, scope config, type rw */ +typedef struct { + unsigned int usb_susp : 1; + unsigned int phyrst_n : 1; + unsigned int dummy1 : 30; +} reg_config_rw_pad_ctrl; +#define REG_RD_ADDR_config_rw_pad_ctrl 8 +#define REG_WR_ADDR_config_rw_pad_ctrl 8 + + +/* Constants */ +enum { + regk_config_bw16 = 0x00000000, + regk_config_bw32 = 0x00000001, + regk_config_master = 0x00000005, + regk_config_nand = 0x00000003, + regk_config_net_rx = 0x00000001, + regk_config_net_tx_rx = 0x00000002, + regk_config_no = 0x00000000, + regk_config_none = 0x00000007, + regk_config_nor = 0x00000000, + regk_config_rw_clk_ctrl_default = 0x00000002, + regk_config_rw_pad_ctrl_default = 0x00000000, + regk_config_ser = 0x00000004, + regk_config_slave = 0x00000006, + regk_config_yes = 0x00000001 +}; +#endif /* __config_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/gio_defs.h b/include/asm-cris/arch-v32/mach-fs/hwregs/gio_defs.h new file mode 100644 index 000000000000..26aa3efcf91b --- /dev/null +++ b/include/asm-cris/arch-v32/mach-fs/hwregs/gio_defs.h @@ -0,0 +1,295 @@ +#ifndef __gio_defs_h +#define __gio_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/gio/rtl/gio_regs.r + * id: gio_regs.r,v 1.5 2005/02/04 09:43:21 perz Exp + * last modfied: Mon Apr 11 16:07:47 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile gio_defs.h ../../inst/gio/rtl/gio_regs.r + * id: $Id: gio_defs.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope gio */ + +/* Register rw_pa_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pa_dout; +#define REG_RD_ADDR_gio_rw_pa_dout 0 +#define REG_WR_ADDR_gio_rw_pa_dout 0 + +/* Register r_pa_din, scope gio, type r */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_gio_r_pa_din; +#define REG_RD_ADDR_gio_r_pa_din 4 + +/* Register rw_pa_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pa_oe; +#define REG_RD_ADDR_gio_rw_pa_oe 8 +#define REG_WR_ADDR_gio_rw_pa_oe 8 + +/* Register rw_intr_cfg, scope gio, type rw */ +typedef struct { + unsigned int pa0 : 3; + unsigned int pa1 : 3; + unsigned int pa2 : 3; + unsigned int pa3 : 3; + unsigned int pa4 : 3; + unsigned int pa5 : 3; + unsigned int pa6 : 3; + unsigned int pa7 : 3; + unsigned int dummy1 : 8; +} reg_gio_rw_intr_cfg; +#define REG_RD_ADDR_gio_rw_intr_cfg 12 +#define REG_WR_ADDR_gio_rw_intr_cfg 12 + +/* Register rw_intr_mask, scope gio, type rw */ +typedef struct { + unsigned int pa0 : 1; + unsigned int pa1 : 1; + unsigned int pa2 : 1; + unsigned int pa3 : 1; + unsigned int pa4 : 1; + unsigned int pa5 : 1; + unsigned int pa6 : 1; + unsigned int pa7 : 1; + unsigned int dummy1 : 24; +} reg_gio_rw_intr_mask; +#define REG_RD_ADDR_gio_rw_intr_mask 16 +#define REG_WR_ADDR_gio_rw_intr_mask 16 + +/* Register rw_ack_intr, scope gio, type rw */ +typedef struct { + unsigned int pa0 : 1; + unsigned int pa1 : 1; + unsigned int pa2 : 1; + unsigned int pa3 : 1; + unsigned int pa4 : 1; + unsigned int pa5 : 1; + unsigned int pa6 : 1; + unsigned int pa7 : 1; + unsigned int dummy1 : 24; +} reg_gio_rw_ack_intr; +#define REG_RD_ADDR_gio_rw_ack_intr 20 +#define REG_WR_ADDR_gio_rw_ack_intr 20 + +/* Register r_intr, scope gio, type r */ +typedef struct { + unsigned int pa0 : 1; + unsigned int pa1 : 1; + unsigned int pa2 : 1; + unsigned int pa3 : 1; + unsigned int pa4 : 1; + unsigned int pa5 : 1; + unsigned int pa6 : 1; + unsigned int pa7 : 1; + unsigned int dummy1 : 24; +} reg_gio_r_intr; +#define REG_RD_ADDR_gio_r_intr 24 + +/* Register r_masked_intr, scope gio, type r */ +typedef struct { + unsigned int pa0 : 1; + unsigned int pa1 : 1; + unsigned int pa2 : 1; + unsigned int pa3 : 1; + unsigned int pa4 : 1; + unsigned int pa5 : 1; + unsigned int pa6 : 1; + unsigned int pa7 : 1; + unsigned int dummy1 : 24; +} reg_gio_r_masked_intr; +#define REG_RD_ADDR_gio_r_masked_intr 28 + +/* Register rw_pb_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 18; + unsigned int dummy1 : 14; +} reg_gio_rw_pb_dout; +#define REG_RD_ADDR_gio_rw_pb_dout 32 +#define REG_WR_ADDR_gio_rw_pb_dout 32 + +/* Register r_pb_din, scope gio, type r */ +typedef struct { + unsigned int data : 18; + unsigned int dummy1 : 14; +} reg_gio_r_pb_din; +#define REG_RD_ADDR_gio_r_pb_din 36 + +/* Register rw_pb_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 18; + unsigned int dummy1 : 14; +} reg_gio_rw_pb_oe; +#define REG_RD_ADDR_gio_rw_pb_oe 40 +#define REG_WR_ADDR_gio_rw_pb_oe 40 + +/* Register rw_pc_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 18; + unsigned int dummy1 : 14; +} reg_gio_rw_pc_dout; +#define REG_RD_ADDR_gio_rw_pc_dout 48 +#define REG_WR_ADDR_gio_rw_pc_dout 48 + +/* Register r_pc_din, scope gio, type r */ +typedef struct { + unsigned int data : 18; + unsigned int dummy1 : 14; +} reg_gio_r_pc_din; +#define REG_RD_ADDR_gio_r_pc_din 52 + +/* Register rw_pc_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 18; + unsigned int dummy1 : 14; +} reg_gio_rw_pc_oe; +#define REG_RD_ADDR_gio_rw_pc_oe 56 +#define REG_WR_ADDR_gio_rw_pc_oe 56 + +/* Register rw_pd_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 18; + unsigned int dummy1 : 14; +} reg_gio_rw_pd_dout; +#define REG_RD_ADDR_gio_rw_pd_dout 64 +#define REG_WR_ADDR_gio_rw_pd_dout 64 + +/* Register r_pd_din, scope gio, type r */ +typedef struct { + unsigned int data : 18; + unsigned int dummy1 : 14; +} reg_gio_r_pd_din; +#define REG_RD_ADDR_gio_r_pd_din 68 + +/* Register rw_pd_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 18; + unsigned int dummy1 : 14; +} reg_gio_rw_pd_oe; +#define REG_RD_ADDR_gio_rw_pd_oe 72 +#define REG_WR_ADDR_gio_rw_pd_oe 72 + +/* Register rw_pe_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 18; + unsigned int dummy1 : 14; +} reg_gio_rw_pe_dout; +#define REG_RD_ADDR_gio_rw_pe_dout 80 +#define REG_WR_ADDR_gio_rw_pe_dout 80 + +/* Register r_pe_din, scope gio, type r */ +typedef struct { + unsigned int data : 18; + unsigned int dummy1 : 14; +} reg_gio_r_pe_din; +#define REG_RD_ADDR_gio_r_pe_din 84 + +/* Register rw_pe_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 18; + unsigned int dummy1 : 14; +} reg_gio_rw_pe_oe; +#define REG_RD_ADDR_gio_rw_pe_oe 88 +#define REG_WR_ADDR_gio_rw_pe_oe 88 + + +/* Constants */ +enum { + regk_gio_anyedge = 0x00000007, + regk_gio_hi = 0x00000001, + regk_gio_lo = 0x00000002, + regk_gio_negedge = 0x00000006, + regk_gio_no = 0x00000000, + regk_gio_off = 0x00000000, + regk_gio_posedge = 0x00000005, + regk_gio_rw_intr_cfg_default = 0x00000000, + regk_gio_rw_intr_mask_default = 0x00000000, + regk_gio_rw_pa_oe_default = 0x00000000, + regk_gio_rw_pb_oe_default = 0x00000000, + regk_gio_rw_pc_oe_default = 0x00000000, + regk_gio_rw_pd_oe_default = 0x00000000, + regk_gio_rw_pe_oe_default = 0x00000000, + regk_gio_set = 0x00000003, + regk_gio_yes = 0x00000001 +}; +#endif /* __gio_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/intr_vect.h b/include/asm-cris/arch-v32/mach-fs/hwregs/intr_vect.h new file mode 100644 index 000000000000..bacc2a895c21 --- /dev/null +++ b/include/asm-cris/arch-v32/mach-fs/hwregs/intr_vect.h @@ -0,0 +1,41 @@ +/* Interrupt vector numbers autogenerated by /n/asic/design/tools/rdesc/src/rdes2intr version + from ../../inst/intr_vect/rtl/guinness/ivmask.config.r +version . */ + +#ifndef _______INST_INTR_VECT_RTL_GUINNESS_IVMASK_CONFIG_R +#define _______INST_INTR_VECT_RTL_GUINNESS_IVMASK_CONFIG_R +#define MEMARB_INTR_VECT 0x31 +#define GEN_IO_INTR_VECT 0x32 +#define GIO_INTR_VECT GEN_IO_INTR_VECT +#define IOP0_INTR_VECT 0x33 +#define IOP1_INTR_VECT 0x34 +#define IOP2_INTR_VECT 0x35 +#define IOP3_INTR_VECT 0x36 +#define DMA0_INTR_VECT 0x37 +#define DMA1_INTR_VECT 0x38 +#define DMA2_INTR_VECT 0x39 +#define DMA3_INTR_VECT 0x3a +#define DMA4_INTR_VECT 0x3b +#define DMA5_INTR_VECT 0x3c +#define DMA6_INTR_VECT 0x3d +#define DMA7_INTR_VECT 0x3e +#define DMA8_INTR_VECT 0x3f +#define DMA9_INTR_VECT 0x40 +#define ATA_INTR_VECT 0x41 +#define SSER0_INTR_VECT 0x42 +#define SSER1_INTR_VECT 0x43 +#define SER0_INTR_VECT 0x44 +#define SER1_INTR_VECT 0x45 +#define SER2_INTR_VECT 0x46 +#define SER3_INTR_VECT 0x47 +#define P21_INTR_VECT 0x48 +#define ETH0_INTR_VECT 0x49 +#define ETH1_INTR_VECT 0x4a +#define TIMER_INTR_VECT 0x4b +#define TIMER0_INTR_VECT TIMER_INTR_VECT +#define BIF_ARB_INTR_VECT 0x4c +#define BIF_DMA_INTR_VECT 0x4d +#define EXT_INTR_VECT 0x4e +#define IPI_INTR_VECT 0x4f +#define NBR_INTR_VECT 0x50 +#endif diff --git a/include/asm-cris/arch-v32/hwregs/intr_vect_defs.h b/include/asm-cris/arch-v32/mach-fs/hwregs/intr_vect_defs.h index 535aaf1b4b52..aa65128ae1aa 100644 --- a/include/asm-cris/arch-v32/hwregs/intr_vect_defs.h +++ b/include/asm-cris/arch-v32/mach-fs/hwregs/intr_vect_defs.h @@ -4,11 +4,11 @@ /* * This file is autogenerated from * file: ../../inst/intr_vect/rtl/guinness/ivmask.config.r - * id: ivmask.config.r,v 1.4 2005/02/15 16:05:38 stefans Exp + * id: ivmask.config.r,v 1.4 2005/02/15 16:05:38 stefans Exp * last modfied: Mon Apr 11 16:08:03 2005 - * + * * by /n/asic/design/tools/rdesc/src/rdes2c --outfile intr_vect_defs.h ../../inst/intr_vect/rtl/guinness/ivmask.config.r - * id: $Id: intr_vect_defs.h,v 1.8 2005/04/24 18:30:58 starvik Exp $ + * id: $Id: intr_vect_defs.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ * Any changes here will be lost. * * -*- buffer-read-only: t -*- @@ -84,6 +84,7 @@ /* C-code for register scope intr_vect */ +#define STRIDE_intr_vect_rw_mask 0 /* Register rw_mask, scope intr_vect, type rw */ typedef struct { unsigned int memarb : 1; @@ -112,7 +113,7 @@ typedef struct { unsigned int p21 : 1; unsigned int eth0 : 1; unsigned int eth1 : 1; - unsigned int timer : 1; + unsigned int timer0 : 1; unsigned int bif_arb : 1; unsigned int bif_dma : 1; unsigned int ext : 1; @@ -121,6 +122,7 @@ typedef struct { #define REG_RD_ADDR_intr_vect_rw_mask 0 #define REG_WR_ADDR_intr_vect_rw_mask 0 +#define STRIDE_intr_vect_r_vect 0 /* Register r_vect, scope intr_vect, type r */ typedef struct { unsigned int memarb : 1; @@ -157,6 +159,7 @@ typedef struct { } reg_intr_vect_r_vect; #define REG_RD_ADDR_intr_vect_r_vect 4 +#define STRIDE_intr_vect_r_masked_vect 0 /* Register r_masked_vect, scope intr_vect, type r */ typedef struct { unsigned int memarb : 1; @@ -209,7 +212,7 @@ typedef struct { #define REG_RD_ADDR_intr_vect_r_guru 16 /* Register rw_ipi, scope intr_vect, type rw */ -typedef struct +typedef struct { unsigned int vector; } reg_intr_vect_rw_ipi; diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/marb_bp_defs.h b/include/asm-cris/arch-v32/mach-fs/hwregs/marb_bp_defs.h new file mode 100644 index 000000000000..dcaaec4620ba --- /dev/null +++ b/include/asm-cris/arch-v32/mach-fs/hwregs/marb_bp_defs.h @@ -0,0 +1,205 @@ +#ifndef __marb_bp_defs_h +#define __marb_bp_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/memarb/rtl/guinness/marb_top.r + * id: <not found> + * last modfied: Fri Nov 7 15:36:04 2003 + * + * by /n/asic/projects/guinness/design/top/inst/rdesc/rdes2c ../../rtl/global.rmap ../../mod/modreg.rmap -base 0xb0000000 ../../inst/memarb/rtl/guinness/marb_top.r + * id: $Id: marb_bp_defs.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +/* C-code for register scope marb_bp */ + +/* Register rw_first_addr, scope marb_bp, type rw */ +typedef unsigned int reg_marb_bp_rw_first_addr; +#define REG_RD_ADDR_marb_bp_rw_first_addr 0 +#define REG_WR_ADDR_marb_bp_rw_first_addr 0 + +/* Register rw_last_addr, scope marb_bp, type rw */ +typedef unsigned int reg_marb_bp_rw_last_addr; +#define REG_RD_ADDR_marb_bp_rw_last_addr 4 +#define REG_WR_ADDR_marb_bp_rw_last_addr 4 + +/* Register rw_op, scope marb_bp, type rw */ +typedef struct { + unsigned int read : 1; + unsigned int write : 1; + unsigned int read_excl : 1; + unsigned int pri_write : 1; + unsigned int us_read : 1; + unsigned int us_write : 1; + unsigned int us_read_excl : 1; + unsigned int us_pri_write : 1; + unsigned int dummy1 : 24; +} reg_marb_bp_rw_op; +#define REG_RD_ADDR_marb_bp_rw_op 8 +#define REG_WR_ADDR_marb_bp_rw_op 8 + +/* Register rw_clients, scope marb_bp, type rw */ +typedef struct { + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma8 : 1; + unsigned int dma9 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int slave : 1; + unsigned int dummy1 : 18; +} reg_marb_bp_rw_clients; +#define REG_RD_ADDR_marb_bp_rw_clients 12 +#define REG_WR_ADDR_marb_bp_rw_clients 12 + +/* Register rw_options, scope marb_bp, type rw */ +typedef struct { + unsigned int wrap : 1; + unsigned int dummy1 : 31; +} reg_marb_bp_rw_options; +#define REG_RD_ADDR_marb_bp_rw_options 16 +#define REG_WR_ADDR_marb_bp_rw_options 16 + +/* Register r_break_addr, scope marb_bp, type r */ +typedef unsigned int reg_marb_bp_r_break_addr; +#define REG_RD_ADDR_marb_bp_r_break_addr 20 + +/* Register r_break_op, scope marb_bp, type r */ +typedef struct { + unsigned int read : 1; + unsigned int write : 1; + unsigned int read_excl : 1; + unsigned int pri_write : 1; + unsigned int us_read : 1; + unsigned int us_write : 1; + unsigned int us_read_excl : 1; + unsigned int us_pri_write : 1; + unsigned int dummy1 : 24; +} reg_marb_bp_r_break_op; +#define REG_RD_ADDR_marb_bp_r_break_op 24 + +/* Register r_break_clients, scope marb_bp, type r */ +typedef struct { + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma8 : 1; + unsigned int dma9 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int slave : 1; + unsigned int dummy1 : 18; +} reg_marb_bp_r_break_clients; +#define REG_RD_ADDR_marb_bp_r_break_clients 28 + +/* Register r_break_first_client, scope marb_bp, type r */ +typedef struct { + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma8 : 1; + unsigned int dma9 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int slave : 1; + unsigned int dummy1 : 18; +} reg_marb_bp_r_break_first_client; +#define REG_RD_ADDR_marb_bp_r_break_first_client 32 + +/* Register r_break_size, scope marb_bp, type r */ +typedef unsigned int reg_marb_bp_r_break_size; +#define REG_RD_ADDR_marb_bp_r_break_size 36 + +/* Register rw_ack, scope marb_bp, type rw */ +typedef unsigned int reg_marb_bp_rw_ack; +#define REG_RD_ADDR_marb_bp_rw_ack 40 +#define REG_WR_ADDR_marb_bp_rw_ack 40 + + +/* Constants */ +enum { + regk_marb_bp_no = 0x00000000, + regk_marb_bp_rw_op_default = 0x00000000, + regk_marb_bp_rw_options_default = 0x00000000, + regk_marb_bp_yes = 0x00000001 +}; +#endif /* __marb_bp_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/marb_defs.h b/include/asm-cris/arch-v32/mach-fs/hwregs/marb_defs.h new file mode 100644 index 000000000000..254da0854986 --- /dev/null +++ b/include/asm-cris/arch-v32/mach-fs/hwregs/marb_defs.h @@ -0,0 +1,475 @@ +#ifndef __marb_defs_h +#define __marb_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/memarb/rtl/guinness/marb_top.r + * id: <not found> + * last modfied: Mon Apr 11 16:12:16 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile marb_defs.h ../../inst/memarb/rtl/guinness/marb_top.r + * id: $Id: marb_defs.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope marb */ + +#define STRIDE_marb_rw_int_slots 4 +/* Register rw_int_slots, scope marb, type rw */ +typedef struct { + unsigned int owner : 4; + unsigned int dummy1 : 28; +} reg_marb_rw_int_slots; +#define REG_RD_ADDR_marb_rw_int_slots 0 +#define REG_WR_ADDR_marb_rw_int_slots 0 + +#define STRIDE_marb_rw_ext_slots 4 +/* Register rw_ext_slots, scope marb, type rw */ +typedef struct { + unsigned int owner : 4; + unsigned int dummy1 : 28; +} reg_marb_rw_ext_slots; +#define REG_RD_ADDR_marb_rw_ext_slots 256 +#define REG_WR_ADDR_marb_rw_ext_slots 256 + +#define STRIDE_marb_rw_regs_slots 4 +/* Register rw_regs_slots, scope marb, type rw */ +typedef struct { + unsigned int owner : 4; + unsigned int dummy1 : 28; +} reg_marb_rw_regs_slots; +#define REG_RD_ADDR_marb_rw_regs_slots 512 +#define REG_WR_ADDR_marb_rw_regs_slots 512 + +/* Register rw_intr_mask, scope marb, type rw */ +typedef struct { + unsigned int bp0 : 1; + unsigned int bp1 : 1; + unsigned int bp2 : 1; + unsigned int bp3 : 1; + unsigned int dummy1 : 28; +} reg_marb_rw_intr_mask; +#define REG_RD_ADDR_marb_rw_intr_mask 528 +#define REG_WR_ADDR_marb_rw_intr_mask 528 + +/* Register rw_ack_intr, scope marb, type rw */ +typedef struct { + unsigned int bp0 : 1; + unsigned int bp1 : 1; + unsigned int bp2 : 1; + unsigned int bp3 : 1; + unsigned int dummy1 : 28; +} reg_marb_rw_ack_intr; +#define REG_RD_ADDR_marb_rw_ack_intr 532 +#define REG_WR_ADDR_marb_rw_ack_intr 532 + +/* Register r_intr, scope marb, type r */ +typedef struct { + unsigned int bp0 : 1; + unsigned int bp1 : 1; + unsigned int bp2 : 1; + unsigned int bp3 : 1; + unsigned int dummy1 : 28; +} reg_marb_r_intr; +#define REG_RD_ADDR_marb_r_intr 536 + +/* Register r_masked_intr, scope marb, type r */ +typedef struct { + unsigned int bp0 : 1; + unsigned int bp1 : 1; + unsigned int bp2 : 1; + unsigned int bp3 : 1; + unsigned int dummy1 : 28; +} reg_marb_r_masked_intr; +#define REG_RD_ADDR_marb_r_masked_intr 540 + +/* Register rw_stop_mask, scope marb, type rw */ +typedef struct { + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma8 : 1; + unsigned int dma9 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int slave : 1; + unsigned int dummy1 : 18; +} reg_marb_rw_stop_mask; +#define REG_RD_ADDR_marb_rw_stop_mask 544 +#define REG_WR_ADDR_marb_rw_stop_mask 544 + +/* Register r_stopped, scope marb, type r */ +typedef struct { + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma8 : 1; + unsigned int dma9 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int slave : 1; + unsigned int dummy1 : 18; +} reg_marb_r_stopped; +#define REG_RD_ADDR_marb_r_stopped 548 + +/* Register rw_no_snoop, scope marb, type rw */ +typedef struct { + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma8 : 1; + unsigned int dma9 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int slave : 1; + unsigned int dummy1 : 18; +} reg_marb_rw_no_snoop; +#define REG_RD_ADDR_marb_rw_no_snoop 832 +#define REG_WR_ADDR_marb_rw_no_snoop 832 + +/* Register rw_no_snoop_rq, scope marb, type rw */ +typedef struct { + unsigned int dummy1 : 10; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int dummy2 : 20; +} reg_marb_rw_no_snoop_rq; +#define REG_RD_ADDR_marb_rw_no_snoop_rq 836 +#define REG_WR_ADDR_marb_rw_no_snoop_rq 836 + + +/* Constants */ +enum { + regk_marb_cpud = 0x0000000b, + regk_marb_cpui = 0x0000000a, + regk_marb_dma0 = 0x00000000, + regk_marb_dma1 = 0x00000001, + regk_marb_dma2 = 0x00000002, + regk_marb_dma3 = 0x00000003, + regk_marb_dma4 = 0x00000004, + regk_marb_dma5 = 0x00000005, + regk_marb_dma6 = 0x00000006, + regk_marb_dma7 = 0x00000007, + regk_marb_dma8 = 0x00000008, + regk_marb_dma9 = 0x00000009, + regk_marb_iop = 0x0000000c, + regk_marb_no = 0x00000000, + regk_marb_r_stopped_default = 0x00000000, + regk_marb_rw_ext_slots_default = 0x00000000, + regk_marb_rw_ext_slots_size = 0x00000040, + regk_marb_rw_int_slots_default = 0x00000000, + regk_marb_rw_int_slots_size = 0x00000040, + regk_marb_rw_intr_mask_default = 0x00000000, + regk_marb_rw_no_snoop_default = 0x00000000, + regk_marb_rw_no_snoop_rq_default = 0x00000000, + regk_marb_rw_regs_slots_default = 0x00000000, + regk_marb_rw_regs_slots_size = 0x00000004, + regk_marb_rw_stop_mask_default = 0x00000000, + regk_marb_slave = 0x0000000d, + regk_marb_yes = 0x00000001 +}; +#endif /* __marb_defs_h */ +#ifndef __marb_bp_defs_h +#define __marb_bp_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/memarb/rtl/guinness/marb_top.r + * id: <not found> + * last modfied: Mon Apr 11 16:12:16 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile marb_defs.h ../../inst/memarb/rtl/guinness/marb_top.r + * id: $Id: marb_defs.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope marb_bp */ + +/* Register rw_first_addr, scope marb_bp, type rw */ +typedef unsigned int reg_marb_bp_rw_first_addr; +#define REG_RD_ADDR_marb_bp_rw_first_addr 0 +#define REG_WR_ADDR_marb_bp_rw_first_addr 0 + +/* Register rw_last_addr, scope marb_bp, type rw */ +typedef unsigned int reg_marb_bp_rw_last_addr; +#define REG_RD_ADDR_marb_bp_rw_last_addr 4 +#define REG_WR_ADDR_marb_bp_rw_last_addr 4 + +/* Register rw_op, scope marb_bp, type rw */ +typedef struct { + unsigned int rd : 1; + unsigned int wr : 1; + unsigned int rd_excl : 1; + unsigned int pri_wr : 1; + unsigned int us_rd : 1; + unsigned int us_wr : 1; + unsigned int us_rd_excl : 1; + unsigned int us_pri_wr : 1; + unsigned int dummy1 : 24; +} reg_marb_bp_rw_op; +#define REG_RD_ADDR_marb_bp_rw_op 8 +#define REG_WR_ADDR_marb_bp_rw_op 8 + +/* Register rw_clients, scope marb_bp, type rw */ +typedef struct { + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma8 : 1; + unsigned int dma9 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int slave : 1; + unsigned int dummy1 : 18; +} reg_marb_bp_rw_clients; +#define REG_RD_ADDR_marb_bp_rw_clients 12 +#define REG_WR_ADDR_marb_bp_rw_clients 12 + +/* Register rw_options, scope marb_bp, type rw */ +typedef struct { + unsigned int wrap : 1; + unsigned int dummy1 : 31; +} reg_marb_bp_rw_options; +#define REG_RD_ADDR_marb_bp_rw_options 16 +#define REG_WR_ADDR_marb_bp_rw_options 16 + +/* Register r_brk_addr, scope marb_bp, type r */ +typedef unsigned int reg_marb_bp_r_brk_addr; +#define REG_RD_ADDR_marb_bp_r_brk_addr 20 + +/* Register r_brk_op, scope marb_bp, type r */ +typedef struct { + unsigned int rd : 1; + unsigned int wr : 1; + unsigned int rd_excl : 1; + unsigned int pri_wr : 1; + unsigned int us_rd : 1; + unsigned int us_wr : 1; + unsigned int us_rd_excl : 1; + unsigned int us_pri_wr : 1; + unsigned int dummy1 : 24; +} reg_marb_bp_r_brk_op; +#define REG_RD_ADDR_marb_bp_r_brk_op 24 + +/* Register r_brk_clients, scope marb_bp, type r */ +typedef struct { + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma8 : 1; + unsigned int dma9 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int slave : 1; + unsigned int dummy1 : 18; +} reg_marb_bp_r_brk_clients; +#define REG_RD_ADDR_marb_bp_r_brk_clients 28 + +/* Register r_brk_first_client, scope marb_bp, type r */ +typedef struct { + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma8 : 1; + unsigned int dma9 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int slave : 1; + unsigned int dummy1 : 18; +} reg_marb_bp_r_brk_first_client; +#define REG_RD_ADDR_marb_bp_r_brk_first_client 32 + +/* Register r_brk_size, scope marb_bp, type r */ +typedef unsigned int reg_marb_bp_r_brk_size; +#define REG_RD_ADDR_marb_bp_r_brk_size 36 + +/* Register rw_ack, scope marb_bp, type rw */ +typedef unsigned int reg_marb_bp_rw_ack; +#define REG_RD_ADDR_marb_bp_rw_ack 40 +#define REG_WR_ADDR_marb_bp_rw_ack 40 + + +/* Constants */ +enum { + regk_marb_bp_no = 0x00000000, + regk_marb_bp_rw_op_default = 0x00000000, + regk_marb_bp_rw_options_default = 0x00000000, + regk_marb_bp_yes = 0x00000001 +}; +#endif /* __marb_bp_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/pinmux_defs.h b/include/asm-cris/arch-v32/mach-fs/hwregs/pinmux_defs.h new file mode 100644 index 000000000000..751eab5f191c --- /dev/null +++ b/include/asm-cris/arch-v32/mach-fs/hwregs/pinmux_defs.h @@ -0,0 +1,357 @@ +#ifndef __pinmux_defs_h +#define __pinmux_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/pinmux/rtl/guinness/pinmux_regs.r + * id: pinmux_regs.r,v 1.40 2005/02/09 16:22:59 perz Exp + * last modfied: Mon Apr 11 16:09:11 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile pinmux_defs.h ../../inst/pinmux/rtl/guinness/pinmux_regs.r + * id: $Id: pinmux_defs.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope pinmux */ + +/* Register rw_pa, scope pinmux, type rw */ +typedef struct { + unsigned int pa0 : 1; + unsigned int pa1 : 1; + unsigned int pa2 : 1; + unsigned int pa3 : 1; + unsigned int pa4 : 1; + unsigned int pa5 : 1; + unsigned int pa6 : 1; + unsigned int pa7 : 1; + unsigned int csp2_n : 1; + unsigned int csp3_n : 1; + unsigned int csp5_n : 1; + unsigned int csp6_n : 1; + unsigned int hsh4 : 1; + unsigned int hsh5 : 1; + unsigned int hsh6 : 1; + unsigned int hsh7 : 1; + unsigned int dummy1 : 16; +} reg_pinmux_rw_pa; +#define REG_RD_ADDR_pinmux_rw_pa 0 +#define REG_WR_ADDR_pinmux_rw_pa 0 + +/* Register rw_hwprot, scope pinmux, type rw */ +typedef struct { + unsigned int ser1 : 1; + unsigned int ser2 : 1; + unsigned int ser3 : 1; + unsigned int sser0 : 1; + unsigned int sser1 : 1; + unsigned int ata0 : 1; + unsigned int ata1 : 1; + unsigned int ata2 : 1; + unsigned int ata3 : 1; + unsigned int ata : 1; + unsigned int eth1 : 1; + unsigned int eth1_mgm : 1; + unsigned int timer : 1; + unsigned int p21 : 1; + unsigned int dummy1 : 18; +} reg_pinmux_rw_hwprot; +#define REG_RD_ADDR_pinmux_rw_hwprot 4 +#define REG_WR_ADDR_pinmux_rw_hwprot 4 + +/* Register rw_pb_gio, scope pinmux, type rw */ +typedef struct { + unsigned int pb0 : 1; + unsigned int pb1 : 1; + unsigned int pb2 : 1; + unsigned int pb3 : 1; + unsigned int pb4 : 1; + unsigned int pb5 : 1; + unsigned int pb6 : 1; + unsigned int pb7 : 1; + unsigned int pb8 : 1; + unsigned int pb9 : 1; + unsigned int pb10 : 1; + unsigned int pb11 : 1; + unsigned int pb12 : 1; + unsigned int pb13 : 1; + unsigned int pb14 : 1; + unsigned int pb15 : 1; + unsigned int pb16 : 1; + unsigned int pb17 : 1; + unsigned int dummy1 : 14; +} reg_pinmux_rw_pb_gio; +#define REG_RD_ADDR_pinmux_rw_pb_gio 8 +#define REG_WR_ADDR_pinmux_rw_pb_gio 8 + +/* Register rw_pb_iop, scope pinmux, type rw */ +typedef struct { + unsigned int pb0 : 1; + unsigned int pb1 : 1; + unsigned int pb2 : 1; + unsigned int pb3 : 1; + unsigned int pb4 : 1; + unsigned int pb5 : 1; + unsigned int pb6 : 1; + unsigned int pb7 : 1; + unsigned int pb8 : 1; + unsigned int pb9 : 1; + unsigned int pb10 : 1; + unsigned int pb11 : 1; + unsigned int pb12 : 1; + unsigned int pb13 : 1; + unsigned int pb14 : 1; + unsigned int pb15 : 1; + unsigned int pb16 : 1; + unsigned int pb17 : 1; + unsigned int dummy1 : 14; +} reg_pinmux_rw_pb_iop; +#define REG_RD_ADDR_pinmux_rw_pb_iop 12 +#define REG_WR_ADDR_pinmux_rw_pb_iop 12 + +/* Register rw_pc_gio, scope pinmux, type rw */ +typedef struct { + unsigned int pc0 : 1; + unsigned int pc1 : 1; + unsigned int pc2 : 1; + unsigned int pc3 : 1; + unsigned int pc4 : 1; + unsigned int pc5 : 1; + unsigned int pc6 : 1; + unsigned int pc7 : 1; + unsigned int pc8 : 1; + unsigned int pc9 : 1; + unsigned int pc10 : 1; + unsigned int pc11 : 1; + unsigned int pc12 : 1; + unsigned int pc13 : 1; + unsigned int pc14 : 1; + unsigned int pc15 : 1; + unsigned int pc16 : 1; + unsigned int pc17 : 1; + unsigned int dummy1 : 14; +} reg_pinmux_rw_pc_gio; +#define REG_RD_ADDR_pinmux_rw_pc_gio 16 +#define REG_WR_ADDR_pinmux_rw_pc_gio 16 + +/* Register rw_pc_iop, scope pinmux, type rw */ +typedef struct { + unsigned int pc0 : 1; + unsigned int pc1 : 1; + unsigned int pc2 : 1; + unsigned int pc3 : 1; + unsigned int pc4 : 1; + unsigned int pc5 : 1; + unsigned int pc6 : 1; + unsigned int pc7 : 1; + unsigned int pc8 : 1; + unsigned int pc9 : 1; + unsigned int pc10 : 1; + unsigned int pc11 : 1; + unsigned int pc12 : 1; + unsigned int pc13 : 1; + unsigned int pc14 : 1; + unsigned int pc15 : 1; + unsigned int pc16 : 1; + unsigned int pc17 : 1; + unsigned int dummy1 : 14; +} reg_pinmux_rw_pc_iop; +#define REG_RD_ADDR_pinmux_rw_pc_iop 20 +#define REG_WR_ADDR_pinmux_rw_pc_iop 20 + +/* Register rw_pd_gio, scope pinmux, type rw */ +typedef struct { + unsigned int pd0 : 1; + unsigned int pd1 : 1; + unsigned int pd2 : 1; + unsigned int pd3 : 1; + unsigned int pd4 : 1; + unsigned int pd5 : 1; + unsigned int pd6 : 1; + unsigned int pd7 : 1; + unsigned int pd8 : 1; + unsigned int pd9 : 1; + unsigned int pd10 : 1; + unsigned int pd11 : 1; + unsigned int pd12 : 1; + unsigned int pd13 : 1; + unsigned int pd14 : 1; + unsigned int pd15 : 1; + unsigned int pd16 : 1; + unsigned int pd17 : 1; + unsigned int dummy1 : 14; +} reg_pinmux_rw_pd_gio; +#define REG_RD_ADDR_pinmux_rw_pd_gio 24 +#define REG_WR_ADDR_pinmux_rw_pd_gio 24 + +/* Register rw_pd_iop, scope pinmux, type rw */ +typedef struct { + unsigned int pd0 : 1; + unsigned int pd1 : 1; + unsigned int pd2 : 1; + unsigned int pd3 : 1; + unsigned int pd4 : 1; + unsigned int pd5 : 1; + unsigned int pd6 : 1; + unsigned int pd7 : 1; + unsigned int pd8 : 1; + unsigned int pd9 : 1; + unsigned int pd10 : 1; + unsigned int pd11 : 1; + unsigned int pd12 : 1; + unsigned int pd13 : 1; + unsigned int pd14 : 1; + unsigned int pd15 : 1; + unsigned int pd16 : 1; + unsigned int pd17 : 1; + unsigned int dummy1 : 14; +} reg_pinmux_rw_pd_iop; +#define REG_RD_ADDR_pinmux_rw_pd_iop 28 +#define REG_WR_ADDR_pinmux_rw_pd_iop 28 + +/* Register rw_pe_gio, scope pinmux, type rw */ +typedef struct { + unsigned int pe0 : 1; + unsigned int pe1 : 1; + unsigned int pe2 : 1; + unsigned int pe3 : 1; + unsigned int pe4 : 1; + unsigned int pe5 : 1; + unsigned int pe6 : 1; + unsigned int pe7 : 1; + unsigned int pe8 : 1; + unsigned int pe9 : 1; + unsigned int pe10 : 1; + unsigned int pe11 : 1; + unsigned int pe12 : 1; + unsigned int pe13 : 1; + unsigned int pe14 : 1; + unsigned int pe15 : 1; + unsigned int pe16 : 1; + unsigned int pe17 : 1; + unsigned int dummy1 : 14; +} reg_pinmux_rw_pe_gio; +#define REG_RD_ADDR_pinmux_rw_pe_gio 32 +#define REG_WR_ADDR_pinmux_rw_pe_gio 32 + +/* Register rw_pe_iop, scope pinmux, type rw */ +typedef struct { + unsigned int pe0 : 1; + unsigned int pe1 : 1; + unsigned int pe2 : 1; + unsigned int pe3 : 1; + unsigned int pe4 : 1; + unsigned int pe5 : 1; + unsigned int pe6 : 1; + unsigned int pe7 : 1; + unsigned int pe8 : 1; + unsigned int pe9 : 1; + unsigned int pe10 : 1; + unsigned int pe11 : 1; + unsigned int pe12 : 1; + unsigned int pe13 : 1; + unsigned int pe14 : 1; + unsigned int pe15 : 1; + unsigned int pe16 : 1; + unsigned int pe17 : 1; + unsigned int dummy1 : 14; +} reg_pinmux_rw_pe_iop; +#define REG_RD_ADDR_pinmux_rw_pe_iop 36 +#define REG_WR_ADDR_pinmux_rw_pe_iop 36 + +/* Register rw_usb_phy, scope pinmux, type rw */ +typedef struct { + unsigned int en_usb0 : 1; + unsigned int en_usb1 : 1; + unsigned int dummy1 : 30; +} reg_pinmux_rw_usb_phy; +#define REG_RD_ADDR_pinmux_rw_usb_phy 40 +#define REG_WR_ADDR_pinmux_rw_usb_phy 40 + + +/* Constants */ +enum { + regk_pinmux_no = 0x00000000, + regk_pinmux_rw_hwprot_default = 0x00000000, + regk_pinmux_rw_pa_default = 0x00000000, + regk_pinmux_rw_pb_gio_default = 0x00000000, + regk_pinmux_rw_pb_iop_default = 0x00000000, + regk_pinmux_rw_pc_gio_default = 0x00000000, + regk_pinmux_rw_pc_iop_default = 0x00000000, + regk_pinmux_rw_pd_gio_default = 0x00000000, + regk_pinmux_rw_pd_iop_default = 0x00000000, + regk_pinmux_rw_pe_gio_default = 0x00000000, + regk_pinmux_rw_pe_iop_default = 0x00000000, + regk_pinmux_rw_usb_phy_default = 0x00000000, + regk_pinmux_yes = 0x00000001 +}; +#endif /* __pinmux_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/reg_map.h b/include/asm-cris/arch-v32/mach-fs/hwregs/reg_map.h index e31502838ec6..4146973a58b3 100644 --- a/include/asm-cris/arch-v32/hwregs/reg_map.h +++ b/include/asm-cris/arch-v32/mach-fs/hwregs/reg_map.h @@ -4,17 +4,17 @@ /* * This file is autogenerated from * file: ../../mod/fakereg.rmap - * id: fakereg.rmap,v 1.3 2004/02/11 19:53:22 ronny Exp + * id: fakereg.rmap,v 1.3 2004/02/11 19:53:22 ronny Exp * last modified: Wed Feb 11 20:53:25 2004 * file: ../../rtl/global.rmap - * id: global.rmap,v 1.3 2003/08/18 15:08:23 mikaeln Exp + * id: global.rmap,v 1.3 2003/08/18 15:08:23 mikaeln Exp * last modified: Mon Aug 18 17:08:23 2003 * file: ../../mod/modreg.rmap - * id: modreg.rmap,v 1.31 2004/02/20 15:40:04 stefans Exp + * id: modreg.rmap,v 1.31 2004/02/20 15:40:04 stefans Exp * last modified: Fri Feb 20 16:40:04 2004 - * + * * by /n/asic/design/tools/rdesc/src/rdes2c -map -base 0xb0000000 ../../rtl/global.rmap ../../mod/modreg.rmap ../../inst/io_proc/rtl/guinness/iop_top.r ../../inst/memarb/rtl/guinness/marb_top.r ../../mod/fakereg.rmap - * id: $Id: reg_map.h,v 1.7 2005/04/24 18:30:58 starvik Exp $ + * id: $Id: reg_map.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ * Any changes here will be lost. * * -*- buffer-read-only: t -*- @@ -97,6 +97,7 @@ typedef enum { regi_strcop = 0xb0030000, regi_strmux = 0xb003a000, regi_timer = 0xb001e000, + regi_timer0 = 0xb001e000, regi_timer2 = 0xb005e000, regi_trace = 0xb0040000, } reg_scope_instances; diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/strmux_defs.h b/include/asm-cris/arch-v32/mach-fs/hwregs/strmux_defs.h new file mode 100644 index 000000000000..cbfaa867829e --- /dev/null +++ b/include/asm-cris/arch-v32/mach-fs/hwregs/strmux_defs.h @@ -0,0 +1,127 @@ +#ifndef __strmux_defs_h +#define __strmux_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/strmux/rtl/guinness/strmux_regs.r + * id: strmux_regs.r,v 1.10 2005/02/10 10:10:46 perz Exp + * last modfied: Mon Apr 11 16:09:43 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile strmux_defs.h ../../inst/strmux/rtl/guinness/strmux_regs.r + * id: $Id: strmux_defs.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope strmux */ + +/* Register rw_cfg, scope strmux, type rw */ +typedef struct { + unsigned int dma0 : 3; + unsigned int dma1 : 3; + unsigned int dma2 : 3; + unsigned int dma3 : 3; + unsigned int dma4 : 3; + unsigned int dma5 : 3; + unsigned int dma6 : 3; + unsigned int dma7 : 3; + unsigned int dma8 : 3; + unsigned int dma9 : 3; + unsigned int dummy1 : 2; +} reg_strmux_rw_cfg; +#define REG_RD_ADDR_strmux_rw_cfg 0 +#define REG_WR_ADDR_strmux_rw_cfg 0 + + +/* Constants */ +enum { + regk_strmux_ata = 0x00000003, + regk_strmux_eth0 = 0x00000001, + regk_strmux_eth1 = 0x00000004, + regk_strmux_ext0 = 0x00000001, + regk_strmux_ext1 = 0x00000001, + regk_strmux_ext2 = 0x00000001, + regk_strmux_ext3 = 0x00000001, + regk_strmux_iop0 = 0x00000002, + regk_strmux_iop1 = 0x00000001, + regk_strmux_off = 0x00000000, + regk_strmux_p21 = 0x00000004, + regk_strmux_rw_cfg_default = 0x00000000, + regk_strmux_ser0 = 0x00000002, + regk_strmux_ser1 = 0x00000002, + regk_strmux_ser2 = 0x00000004, + regk_strmux_ser3 = 0x00000003, + regk_strmux_sser0 = 0x00000003, + regk_strmux_sser1 = 0x00000003, + regk_strmux_strcop = 0x00000002 +}; +#endif /* __strmux_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/timer_defs.h b/include/asm-cris/arch-v32/mach-fs/hwregs/timer_defs.h index 20c8c89ec076..76bcc591921d 100644 --- a/include/asm-cris/arch-v32/hwregs/timer_defs.h +++ b/include/asm-cris/arch-v32/mach-fs/hwregs/timer_defs.h @@ -4,11 +4,11 @@ /* * This file is autogenerated from * file: ../../inst/timer/rtl/timer_regs.r - * id: timer_regs.r,v 1.7 2003/03/11 11:16:59 perz Exp + * id: timer_regs.r,v 1.7 2003/03/11 11:16:59 perz Exp * last modfied: Mon Apr 11 16:09:53 2005 - * + * * by /n/asic/design/tools/rdesc/src/rdes2c --outfile timer_defs.h ../../inst/timer/rtl/timer_regs.r - * id: $Id: timer_defs.h,v 1.6 2005/04/24 18:30:58 starvik Exp $ + * id: $Id: timer_defs.h,v 1.1 2007/04/11 13:51:01 ricardw Exp $ * Any changes here will be lost. * * -*- buffer-read-only: t -*- diff --git a/include/asm-cris/arch-v32/mach-fs/pinmux.h b/include/asm-cris/arch-v32/mach-fs/pinmux.h new file mode 100644 index 000000000000..c2b3036779df --- /dev/null +++ b/include/asm-cris/arch-v32/mach-fs/pinmux.h @@ -0,0 +1,38 @@ +#ifndef _ASM_CRIS_ARCH_PINMUX_H +#define _ASM_CRIS_ARCH_PINMUX_H + +#define PORT_B 0 +#define PORT_C 1 +#define PORT_D 2 +#define PORT_E 3 + +enum pin_mode { + pinmux_none = 0, + pinmux_fixed, + pinmux_gpio, + pinmux_iop +}; + +enum fixed_function { + pinmux_ser1, + pinmux_ser2, + pinmux_ser3, + pinmux_sser0, + pinmux_sser1, + pinmux_ata0, + pinmux_ata1, + pinmux_ata2, + pinmux_ata3, + pinmux_ata, + pinmux_eth1, + pinmux_timer +}; + +int crisv32_pinmux_init(void); +int crisv32_pinmux_alloc(int port, int first_pin, int last_pin, enum pin_mode); +int crisv32_pinmux_alloc_fixed(enum fixed_function function); +int crisv32_pinmux_dealloc(int port, int first_pin, int last_pin); +int crisv32_pinmux_dealloc_fixed(enum fixed_function function); +void crisv32_pinmux_dump(void); + +#endif diff --git a/include/asm-cris/arch-v32/mach-fs/startup.inc b/include/asm-cris/arch-v32/mach-fs/startup.inc new file mode 100644 index 000000000000..4a10ccbd6cc1 --- /dev/null +++ b/include/asm-cris/arch-v32/mach-fs/startup.inc @@ -0,0 +1,77 @@ +#include <hwregs/asm/reg_map_asm.h> +#include <hwregs/asm/bif_core_defs_asm.h> +#include <hwregs/asm/gio_defs_asm.h> +#include <hwregs/asm/config_defs_asm.h> + + .macro GIO_INIT + move.d CONFIG_ETRAX_DEF_GIO_PA_OUT, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pa_dout), $r1 + move.d $r0, [$r1] + + move.d CONFIG_ETRAX_DEF_GIO_PA_OE, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pa_oe), $r1 + move.d $r0, [$r1] + + move.d CONFIG_ETRAX_DEF_GIO_PB_OUT, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pb_dout), $r1 + move.d $r0, [$r1] + + move.d CONFIG_ETRAX_DEF_GIO_PB_OE, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pb_oe), $r1 + move.d $r0, [$r1] + + move.d CONFIG_ETRAX_DEF_GIO_PC_OUT, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pc_dout), $r1 + move.d $r0, [$r1] + + move.d CONFIG_ETRAX_DEF_GIO_PC_OE, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pc_oe), $r1 + move.d $r0, [$r1] + + move.d CONFIG_ETRAX_DEF_GIO_PD_OUT, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pd_dout), $r1 + move.d $r0, [$r1] + + move.d CONFIG_ETRAX_DEF_GIO_PD_OE, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pd_oe), $r1 + move.d $r0, [$r1] + + move.d CONFIG_ETRAX_DEF_GIO_PE_OUT, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pe_dout), $r1 + move.d $r0, [$r1] + + move.d CONFIG_ETRAX_DEF_GIO_PE_OE, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pe_oe), $r1 + move.d $r0, [$r1] + .endm + + .macro START_CLOCKS + move.d REG_ADDR(config, regi_config, rw_clk_ctrl), $r1 + move.d [$r1], $r0 + or.d REG_STATE(config, rw_clk_ctrl, cpu, yes) | \ + REG_STATE(config, rw_clk_ctrl, bif, yes) | \ + REG_STATE(config, rw_clk_ctrl, fix_io, yes), $r0 + move.d $r0, [$r1] + .endm + + .macro SETUP_WAIT_STATES + ;; Set up waitstates etc + move.d REG_ADDR(bif_core, regi_bif_core, rw_grp1_cfg), $r0 + move.d CONFIG_ETRAX_MEM_GRP1_CONFIG, $r1 + move.d $r1, [$r0] + move.d REG_ADDR(bif_core, regi_bif_core, rw_grp2_cfg), $r0 + move.d CONFIG_ETRAX_MEM_GRP2_CONFIG, $r1 + move.d $r1, [$r0] + move.d REG_ADDR(bif_core, regi_bif_core, rw_grp3_cfg), $r0 + move.d CONFIG_ETRAX_MEM_GRP3_CONFIG, $r1 + move.d $r1, [$r0] + move.d REG_ADDR(bif_core, regi_bif_core, rw_grp4_cfg), $r0 + move.d CONFIG_ETRAX_MEM_GRP4_CONFIG, $r1 + move.d $r1, [$r0] +#ifdef CONFIG_ETRAX_VCS_SIM + ;; Set up minimal flash waitstates + move.d 0, $r10 + move.d REG_ADDR(bif_core, regi_bif_core, rw_grp1_cfg), $r11 + move.d $r10, [$r11] +#endif + .endm diff --git a/include/asm-cris/arch-v32/offset.h b/include/asm-cris/arch-v32/offset.h index 597419b033f9..4442c4bd52f4 100644 --- a/include/asm-cris/arch-v32/offset.h +++ b/include/asm-cris/arch-v32/offset.h @@ -27,7 +27,7 @@ #define THREAD_usp 4 /* offsetof(struct thread_struct, usp) */ #define THREAD_ccs 8 /* offsetof(struct thread_struct, ccs) */ -#define TASK_pid 149 /* offsetof(struct task_struct, pid) */ +#define TASK_pid 151 /* offsetof(struct task_struct, pid) */ #define LCLONE_VM 256 /* CLONE_VM */ #define LCLONE_UNTRACED 8388608 /* CLONE_UNTRACED */ diff --git a/include/asm-cris/arch-v32/page.h b/include/asm-cris/arch-v32/page.h index fa454fe12425..20f1b4806bfe 100644 --- a/include/asm-cris/arch-v32/page.h +++ b/include/asm-cris/arch-v32/page.h @@ -7,11 +7,11 @@ #define PAGE_OFFSET KSEG_C /* kseg_c is mapped to physical ram. */ /* - * Macros to convert between physical and virtual addresses. By stripiing a + * Macros to convert between physical and virtual addresses. By stripping a * selected bit it's possible to convert between KSEG_x and 0x40000000 where the * DRAM really resides. DRAM is virtually at 0xc. */ -#ifndef CONFIG_ETRAXFS_SIM +#ifndef CONFIG_ETRAX_VCS_SIM #define __pa(x) ((unsigned long)(x) & 0x7fffffff) #define __va(x) ((void *)((unsigned long)(x) | 0x80000000)) #else diff --git a/include/asm-cris/arch-v32/pinmux.h b/include/asm-cris/arch-v32/pinmux.h index a66dc9970919..bb09bce42e7a 100644 --- a/include/asm-cris/arch-v32/pinmux.h +++ b/include/asm-cris/arch-v32/pinmux.h @@ -34,6 +34,7 @@ int crisv32_pinmux_init(void); int crisv32_pinmux_alloc(int port, int first_pin, int last_pin, enum pin_mode); int crisv32_pinmux_alloc_fixed(enum fixed_function function); int crisv32_pinmux_dealloc(int port, int first_pin, int last_pin); +int crisv32_pinmux_dealloc_fixed(enum fixed_function function); void crisv32_pinmux_dump(void); #endif diff --git a/include/asm-cris/arch-v32/processor.h b/include/asm-cris/arch-v32/processor.h index 5553b0cd02bf..f80b47790ca6 100644 --- a/include/asm-cris/arch-v32/processor.h +++ b/include/asm-cris/arch-v32/processor.h @@ -23,7 +23,7 @@ struct thread_struct { * User-space process size. This is hardcoded into a few places, so don't * changed it unless everything's clear! */ -#ifndef CONFIG_ETRAXFS_SIM +#ifndef CONFIG_ETRAX_VCS_SIM #define TASK_SIZE (0xB0000000UL) #else #define TASK_SIZE (0xA0000000UL) diff --git a/include/asm-cris/arch-v32/spinlock.h b/include/asm-cris/arch-v32/spinlock.h index 5f43df0a5fb4..0d5709b983a1 100644 --- a/include/asm-cris/arch-v32/spinlock.h +++ b/include/asm-cris/arch-v32/spinlock.h @@ -1,40 +1,47 @@ #ifndef __ASM_ARCH_SPINLOCK_H #define __ASM_ARCH_SPINLOCK_H -#include <asm/system.h> +#include <linux/spinlock_types.h> #define RW_LOCK_BIAS 0x01000000 -#define SPIN_LOCK_UNLOCKED (spinlock_t) { 1 } -#define spin_lock_init(x) do { *(x) = SPIN_LOCK_UNLOCKED; } while(0) - -#define spin_is_locked(x) (*(volatile signed char *)(&(x)->lock) <= 0) -#define spin_unlock_wait(x) do { barrier(); } while(spin_is_locked(x)) extern void cris_spin_unlock(void *l, int val); extern void cris_spin_lock(void *l); -extern int cris_spin_trylock(void* l); +extern int cris_spin_trylock(void *l); -static inline void _raw_spin_unlock(spinlock_t *lock) +static inline int __raw_spin_is_locked(raw_spinlock_t *x) +{ + return *(volatile signed char *)(&(x)->slock) <= 0; +} + +static inline void __raw_spin_unlock(raw_spinlock_t *lock) { __asm__ volatile ("move.d %1,%0" \ - : "=m" (lock->lock) \ + : "=m" (lock->slock) \ : "r" (1) \ : "memory"); } -static inline int _raw_spin_trylock(spinlock_t *lock) +static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock) +{ + while (__raw_spin_is_locked(lock)) + cpu_relax(); +} + +static inline int __raw_spin_trylock(raw_spinlock_t *lock) { - return cris_spin_trylock((void*)&lock->lock); + return cris_spin_trylock((void *)&lock->slock); } -static inline void _raw_spin_lock(spinlock_t *lock) +static inline void __raw_spin_lock(raw_spinlock_t *lock) { - cris_spin_lock((void*)&lock->lock); + cris_spin_lock((void *)&lock->slock); } -static inline void _raw_spin_lock_flags (spinlock_t *lock, unsigned long flags) +static inline void +__raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags) { - _raw_spin_lock(lock); + __raw_spin_lock(lock); } /* @@ -46,120 +53,75 @@ static inline void _raw_spin_lock_flags (spinlock_t *lock, unsigned long flags) * can "mix" irq-safe locks - any writer needs to get a * irq-safe write-lock, but readers can get non-irqsafe * read-locks. + * */ -typedef struct { - spinlock_t lock; - volatile int counter; -#ifdef CONFIG_PREEMPT - unsigned int break_lock; -#endif -} rwlock_t; - -#define RW_LOCK_UNLOCKED (rwlock_t) { {1}, 0 } - -#define rwlock_init(lp) do { *(lp) = RW_LOCK_UNLOCKED; } while (0) - -/** - * read_can_lock - would read_trylock() succeed? - * @lock: the rwlock in question. - */ -#define read_can_lock(x) ((int)(x)->counter >= 0) - -/** - * write_can_lock - would write_trylock() succeed? - * @lock: the rwlock in question. - */ -#define write_can_lock(x) ((x)->counter == 0) - -#define _raw_read_trylock(lock) generic_raw_read_trylock(lock) -/* read_lock, read_unlock are pretty straightforward. Of course it somehow - * sucks we end up saving/restoring flags twice for read_lock_irqsave aso. */ - -static __inline__ void _raw_read_lock(rwlock_t *rw) +static inline int __raw_read_can_lock(raw_rwlock_t *x) { - unsigned long flags; - local_irq_save(flags); - _raw_spin_lock(&rw->lock); - - rw->counter++; - - _raw_spin_unlock(&rw->lock); - local_irq_restore(flags); + return (int)(x)->lock > 0; } -static __inline__ void _raw_read_unlock(rwlock_t *rw) +static inline int __raw_write_can_lock(raw_rwlock_t *x) { - unsigned long flags; - local_irq_save(flags); - _raw_spin_lock(&rw->lock); - - rw->counter--; - - _raw_spin_unlock(&rw->lock); - local_irq_restore(flags); + return (x)->lock == RW_LOCK_BIAS; } -/* write_lock is less trivial. We optimistically grab the lock and check - * if we surprised any readers. If so we release the lock and wait till - * they're all gone before trying again - * - * Also note that we don't use the _irqsave / _irqrestore suffixes here. - * If we're called with interrupts enabled and we've got readers (or other - * writers) in interrupt handlers someone fucked up and we'd dead-lock - * sooner or later anyway. prumpf */ - -static __inline__ void _raw_write_lock(rwlock_t *rw) +static inline void __raw_read_lock(raw_rwlock_t *rw) { -retry: - _raw_spin_lock(&rw->lock); - - if(rw->counter != 0) { - /* this basically never happens */ - _raw_spin_unlock(&rw->lock); - - while(rw->counter != 0); - - goto retry; - } - - /* got it. now leave without unlocking */ - rw->counter = -1; /* remember we are locked */ + __raw_spin_lock(&rw->slock); + while (rw->lock == 0); + rw->lock--; + __raw_spin_unlock(&rw->slock); } -/* write_unlock is absolutely trivial - we don't have to wait for anything */ - -static __inline__ void _raw_write_unlock(rwlock_t *rw) +static inline void __raw_write_lock(raw_rwlock_t *rw) { - rw->counter = 0; - _raw_spin_unlock(&rw->lock); + __raw_spin_lock(&rw->slock); + while (rw->lock != RW_LOCK_BIAS); + rw->lock == 0; + __raw_spin_unlock(&rw->slock); } -static __inline__ int _raw_write_trylock(rwlock_t *rw) +static inline void __raw_read_unlock(raw_rwlock_t *rw) { - _raw_spin_lock(&rw->lock); - if (rw->counter != 0) { - /* this basically never happens */ - _raw_spin_unlock(&rw->lock); - - return 0; - } + __raw_spin_lock(&rw->slock); + rw->lock++; + __raw_spin_unlock(&rw->slock); +} - /* got it. now leave without unlocking */ - rw->counter = -1; /* remember we are locked */ - return 1; +static inline void __raw_write_unlock(raw_rwlock_t *rw) +{ + __raw_spin_lock(&rw->slock); + while (rw->lock != RW_LOCK_BIAS); + rw->lock == RW_LOCK_BIAS; + __raw_spin_unlock(&rw->slock); } -static __inline__ int is_read_locked(rwlock_t *rw) +static inline int __raw_read_trylock(raw_rwlock_t *rw) { - return rw->counter > 0; + int ret = 0; + __raw_spin_lock(&rw->slock); + if (rw->lock != 0) { + rw->lock--; + ret = 1; + } + __raw_spin_unlock(&rw->slock); + return ret; } -static __inline__ int is_write_locked(rwlock_t *rw) +static inline int __raw_write_trylock(raw_rwlock_t *rw) { - return rw->counter < 0; + int ret = 0; + __raw_spin_lock(&rw->slock); + if (rw->lock == RW_LOCK_BIAS) { + rw->lock == 0; + ret = 1; + } + __raw_spin_unlock(&rw->slock); + return 1; } + #define _raw_spin_relax(lock) cpu_relax() #define _raw_read_relax(lock) cpu_relax() #define _raw_write_relax(lock) cpu_relax() diff --git a/include/asm-cris/arch-v32/system.h b/include/asm-cris/arch-v32/system.h index d20e2d6d64a3..6ca90f1f110a 100644 --- a/include/asm-cris/arch-v32/system.h +++ b/include/asm-cris/arch-v32/system.h @@ -66,13 +66,4 @@ struct __xchg_dummy { unsigned long a[100]; }; #define local_irq_save(x) \ __asm__ __volatile__ ("move $ccs, %0\n\tdi" : "=rm" (x) : : "memory"); -#ifdef CONFIG_SMP -typedef struct { - volatile unsigned int lock __attribute__ ((aligned(4))); -#ifdef CONFIG_PREEMPT - unsigned int break_lock; -#endif -} spinlock_t; -#endif - #endif /* _ASM_CRIS_ARCH_SYSTEM_H */ diff --git a/include/asm-cris/arch-v32/timex.h b/include/asm-cris/arch-v32/timex.h index 5a4aa285d5fd..2591d3c5ed9d 100644 --- a/include/asm-cris/arch-v32/timex.h +++ b/include/asm-cris/arch-v32/timex.h @@ -1,9 +1,9 @@ #ifndef _ASM_CRIS_ARCH_TIMEX_H #define _ASM_CRIS_ARCH_TIMEX_H -#include <asm/arch/hwregs/reg_map.h> -#include <asm/arch/hwregs/reg_rdwr.h> -#include <asm/arch/hwregs/timer_defs.h> +#include <hwregs/reg_map.h> +#include <hwregs/reg_rdwr.h> +#include <hwregs/timer_defs.h> /* * The clock runs at 100MHz, we divide it by 1000000. If you change anything @@ -18,7 +18,7 @@ /* Convert the value in step of 10 ns to 1us without overflow: */ #define GET_JIFFIES_USEC() \ - ( (TIMER0_DIV - REG_RD(timer, regi_timer, r_tmr0_data)) /100 ) + ((TIMER0_DIV - REG_RD(timer, regi_timer0, r_tmr0_data)) / 100) extern unsigned long get_ns_in_jiffie(void); diff --git a/include/asm-cris/arch-v32/unistd.h b/include/asm-cris/arch-v32/unistd.h index 5d369d4439d9..0051114c63c7 100644 --- a/include/asm-cris/arch-v32/unistd.h +++ b/include/asm-cris/arch-v32/unistd.h @@ -16,7 +16,8 @@ type name(void) \ ".endif\n\t" \ "break 13" \ : "=r" (__a) \ - : "r" (__n_)); \ + : "r" (__n_) \ + : "memory"); \ if (__a >= 0) \ return (type) __a; \ errno = -__a; \ @@ -33,7 +34,8 @@ type name(type1 arg1) \ ".endif\n\t" \ "break 13" \ : "=r" (__a) \ - : "r" (__n_), "0" (__a)); \ + : "r" (__n_), "0" (__a) \ + : "memory"); \ if (__a >= 0) \ return (type) __a; \ errno = -__a; \ @@ -51,7 +53,8 @@ type name(type1 arg1,type2 arg2) \ ".endif\n\t" \ "break 13" \ : "=r" (__a) \ - : "r" (__n_), "0" (__a), "r" (__b)); \ + : "r" (__n_), "0" (__a), "r" (__b) \ + : "memory"); \ if (__a >= 0) \ return (type) __a; \ errno = -__a; \ @@ -70,7 +73,8 @@ type name(type1 arg1,type2 arg2,type3 arg3) \ ".endif\n\t" \ "break 13" \ : "=r" (__a) \ - : "r" (__n_), "0" (__a), "r" (__b), "r" (__c)); \ + : "r" (__n_), "0" (__a), "r" (__b), "r" (__c) \ + : "memory"); \ if (__a >= 0) \ return (type) __a; \ errno = -__a; \ @@ -91,7 +95,8 @@ type name (type1 arg1, type2 arg2, type3 arg3, type4 arg4) \ "break 13" \ : "=r" (__a) \ : "r" (__n_), "0" (__a), "r" (__b), \ - "r" (__c), "r" (__d)); \ + "r" (__c), "r" (__d)\ + : "memory"); \ if (__a >= 0) \ return (type) __a; \ errno = -__a; \ @@ -114,7 +119,8 @@ type name (type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5) \ "break 13" \ : "=r" (__a) \ : "r" (__n_), "0" (__a), "r" (__b), \ - "r" (__c), "r" (__d), "h" (__e)); \ + "r" (__c), "r" (__d), "h" (__e) \ + : "memory"); \ if (__a >= 0) \ return (type) __a; \ errno = -__a; \ @@ -138,7 +144,8 @@ type name (type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5,type6 arg6) \ "break 13" \ : "=r" (__a) \ : "r" (__n_), "0" (__a), "r" (__b), \ - "r" (__c), "r" (__d), "h" (__e), "x" (__f)); \ + "r" (__c), "r" (__d), "h" (__e), "x" (__f) \ + : "memory"); \ if (__a >= 0) \ return (type) __a; \ errno = -__a; \ diff --git a/include/asm-cris/atomic.h b/include/asm-cris/atomic.h index 2949a945876a..5fc87768774a 100644 --- a/include/asm-cris/atomic.h +++ b/include/asm-cris/atomic.h @@ -91,7 +91,7 @@ static inline int atomic_inc_return(volatile atomic_t *v) unsigned long flags; int retval; cris_atomic_save(v, flags); - retval = (v->counter)++; + retval = ++(v->counter); cris_atomic_restore(v, flags); return retval; } @@ -101,7 +101,7 @@ static inline int atomic_dec_return(volatile atomic_t *v) unsigned long flags; int retval; cris_atomic_save(v, flags); - retval = (v->counter)--; + retval = --(v->counter); cris_atomic_restore(v, flags); return retval; } diff --git a/include/asm-cris/axisflashmap.h b/include/asm-cris/axisflashmap.h index 7a8d3114e682..015ca5445ddd 100644 --- a/include/asm-cris/axisflashmap.h +++ b/include/asm-cris/axisflashmap.h @@ -10,23 +10,23 @@ */ #define PARTITION_TABLE_OFFSET 10 -#define PARTITION_TABLE_MAGIC 0xbeef /* Not a good magic */ +#define PARTITION_TABLE_MAGIC 0xbeef /* Not a good magic */ /* The partitiontable_head is located at offset +10: */ struct partitiontable_head { - __u16 magic; /* PARTITION_TABLE_MAGIC */ - __u16 size; /* Length of ptable block (not header) */ - __u32 checksum; /* simple longword sum */ + __u16 magic; /* PARTITION_TABLE_MAGIC */ + __u16 size; /* Length of ptable block (entries + end marker) */ + __u32 checksum; /* simple longword sum, over entries + end marker */ }; /* And followed by partition table entries */ struct partitiontable_entry { - __u32 offset; /* Offset is relative to the sector the ptable is in */ - __u32 size; - __u32 checksum; /* simple longword sum */ - __u16 type; - __u16 flags; /* bit 0: ro/rw = 1/0 */ - __u32 future0; /* 16 bytes reserved for future use */ + __u32 offset; /* relative to the sector the ptable is in */ + __u32 size; /* in bytes */ + __u32 checksum; /* simple longword sum */ + __u16 type; /* see type codes below */ + __u16 flags; /* bit 0: ro/rw = 1/0 */ + __u32 future0; /* 16 bytes reserved for future use */ __u32 future1; __u32 future2; __u32 future3; @@ -35,12 +35,27 @@ struct partitiontable_entry { #define PARTITIONTABLE_END_MARKER 0xFFFFFFFF #define PARTITIONTABLE_END_MARKER_SIZE 4 -/*#define PARTITION_TYPE_RESCUE 0x0000?*/ /* Not used, maybe it should? */ +#define PARTITIONTABLE_END_PAD 10 + +/* Complete structure for whole partition table */ +/* note that table may end before CONFIG_ETRAX_PTABLE_ENTRIES by setting + * offset of the last entry + 1 to PARTITIONTABLE_END_MARKER. + */ +struct partitiontable { + __u8 skip[PARTITION_TABLE_OFFSET]; + struct partitiontable_head head; + struct partitiontable_entry entries[]; +}; + #define PARTITION_TYPE_PARAM 0x0001 #define PARTITION_TYPE_KERNEL 0x0002 #define PARTITION_TYPE_JFFS 0x0003 +#define PARTITION_TYPE_JFFS2 0x0000 + +#define PARTITION_FLAGS_READONLY_MASK 0x0001 +#define PARTITION_FLAGS_READONLY 0x0001 /* The master mtd for the entire flash. */ -extern struct mtd_info* axisflash_mtd; +extern struct mtd_info *axisflash_mtd; #endif diff --git a/include/asm-cris/bug.h b/include/asm-cris/bug.h index 8dd6b23c15d6..fee12d4ae683 100644 --- a/include/asm-cris/bug.h +++ b/include/asm-cris/bug.h @@ -1,4 +1,4 @@ #ifndef _CRIS_BUG_H #define _CRIS_BUG_H -#include <asm-generic/bug.h> +#include <asm/arch/bug.h> #endif diff --git a/include/asm-cris/delay.h b/include/asm-cris/delay.h index d3a397803719..123e19aef49d 100644 --- a/include/asm-cris/delay.h +++ b/include/asm-cris/delay.h @@ -13,10 +13,13 @@ extern unsigned long loops_per_usec; /* arch/cris/mm/init.c */ +/* May be defined by arch/delay.h. */ +#ifndef udelay static inline void udelay(unsigned long usecs) { __delay(usecs * loops_per_usec); } +#endif #endif /* defined(_CRIS_DELAY_H) */ diff --git a/include/asm-cris/dma-mapping.h b/include/asm-cris/dma-mapping.h index 662cea70152d..edc8d1bfaae2 100644 --- a/include/asm-cris/dma-mapping.h +++ b/include/asm-cris/dma-mapping.h @@ -164,16 +164,5 @@ dma_cache_sync(struct device *dev, void *vaddr, size_t size, { } -#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY -extern int -dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, - dma_addr_t device_addr, size_t size, int flags); - -extern void -dma_release_declared_memory(struct device *dev); - -extern void * -dma_mark_declared_memory_occupied(struct device *dev, - dma_addr_t device_addr, size_t size); #endif diff --git a/include/asm-cris/etraxgpio.h b/include/asm-cris/etraxgpio.h index 5d0028dba7c6..38f1c8e1770c 100644 --- a/include/asm-cris/etraxgpio.h +++ b/include/asm-cris/etraxgpio.h @@ -1,25 +1,34 @@ -/* $Id: etraxgpio.h,v 1.8 2002/06/17 15:53:07 johana Exp $ */ /* * The following devices are accessable using this driver using - * GPIO_MAJOR (120) and a couple of minor numbers: - * For ETRAX 100LX (ARCH_V10): + * GPIO_MAJOR (120) and a couple of minor numbers. + * + * For ETRAX 100LX (CONFIG_ETRAX_ARCH_V10): * /dev/gpioa minor 0, 8 bit GPIO, each bit can change direction * /dev/gpiob minor 1, 8 bit GPIO, each bit can change direction * /dev/leds minor 2, Access to leds depending on kernelconfig * /dev/gpiog minor 3 - g0dir, g8_15dir, g16_23dir, g24 dir configurable in R_GEN_CONFIG - g1-g7 and g25-g31 is both input and outputs but on different pins - Also note that some bits change pins depending on what interfaces - are enabled. + * g0dir, g8_15dir, g16_23dir, g24 dir configurable in R_GEN_CONFIG + * g1-g7 and g25-g31 is both input and outputs but on different pins + * Also note that some bits change pins depending on what interfaces + * are enabled. * + * For ETRAX FS (CONFIG_ETRAXFS): + * /dev/gpioa minor 0, 8 bit GPIO, each bit can change direction + * /dev/gpiob minor 1, 18 bit GPIO, each bit can change direction + * /dev/gpioc minor 3, 18 bit GPIO, each bit can change direction + * /dev/gpiod minor 4, 18 bit GPIO, each bit can change direction + * /dev/gpioe minor 5, 18 bit GPIO, each bit can change direction + * /dev/leds minor 2, Access to leds depending on kernelconfig * - * For ETRAX FS (ARCH_V32): + * For ARTPEC-3 (CONFIG_CRIS_MACH_ARTPEC3): * /dev/gpioa minor 0, 8 bit GPIO, each bit can change direction * /dev/gpiob minor 1, 18 bit GPIO, each bit can change direction - * /dev/gpioc minor 2, 18 bit GPIO, each bit can change direction - * /dev/gpiod minor 3, 18 bit GPIO, each bit can change direction - * /dev/gpioe minor 4, 18 bit GPIO, each bit can change direction - * /dev/leds minor 5, Access to leds depending on kernelconfig + * /dev/gpioc minor 3, 18 bit GPIO, each bit can change direction + * /dev/gpiod minor 4, 18 bit GPIO, each bit can change direction + * /dev/leds minor 2, Access to leds depending on kernelconfig + * /dev/pwm0 minor 16, PWM channel 0 on PA30 + * /dev/pwm1 minor 17, PWM channel 1 on PA31 + * /dev/pwm2 minor 18, PWM channel 2 on PB26 * */ #ifndef _ASM_ETRAXGPIO_H @@ -34,7 +43,8 @@ #define GPIO_MINOR_G 3 #define GPIO_MINOR_LAST 3 #endif -#ifdef CONFIG_ETRAX_ARCH_V32 + +#ifdef CONFIG_ETRAXFS #define ETRAXGPIO_IOCTYPE 43 #define GPIO_MINOR_A 0 #define GPIO_MINOR_B 1 @@ -42,8 +52,32 @@ #define GPIO_MINOR_C 3 #define GPIO_MINOR_D 4 #define GPIO_MINOR_E 5 +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO +#define GPIO_MINOR_V 6 +#define GPIO_MINOR_LAST 6 +#else #define GPIO_MINOR_LAST 5 #endif +#endif + +#ifdef CONFIG_CRIS_MACH_ARTPEC3 +#define ETRAXGPIO_IOCTYPE 43 +#define GPIO_MINOR_A 0 +#define GPIO_MINOR_B 1 +#define GPIO_MINOR_LEDS 2 +#define GPIO_MINOR_C 3 +#define GPIO_MINOR_D 4 +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO +#define GPIO_MINOR_V 6 +#define GPIO_MINOR_LAST 6 +#else +#define GPIO_MINOR_LAST 4 +#endif +#define GPIO_MINOR_PWM0 16 +#define GPIO_MINOR_PWM1 17 +#define GPIO_MINOR_PWM2 18 +#define GPIO_MINOR_LAST_PWM GPIO_MINOR_PWM2 +#endif /* supported ioctl _IOC_NR's */ @@ -63,7 +97,7 @@ /* GPIO direction ioctl's */ #define IO_READDIR 0x8 /* Read direction 0=input 1=output (obsolete) */ -#define IO_SETINPUT 0x9 /* Set direction for bits set, 0=unchanged 1=input, +#define IO_SETINPUT 0x9 /* Set direction for bits set, 0=unchanged 1=input, returns mask with current inputs (obsolete) */ #define IO_SETOUTPUT 0xA /* Set direction for bits set, 0=unchanged 1=output, returns mask with current outputs (obsolete)*/ @@ -77,13 +111,13 @@ #define IO_GET_PWR_BT 0xE /* Bit toggling in driver settings */ -/* bit set in low byte0 is CLK mask (0x00FF), - bit set in byte1 is DATA mask (0xFF00) +/* bit set in low byte0 is CLK mask (0x00FF), + bit set in byte1 is DATA mask (0xFF00) msb, data_mask[7:0] , clk_mask[7:0] */ -#define IO_CFG_WRITE_MODE 0xF +#define IO_CFG_WRITE_MODE 0xF #define IO_CFG_WRITE_MODE_VALUE(msb, data_mask, clk_mask) \ - ( (((msb)&1) << 16) | (((data_mask) &0xFF) << 8) | ((clk_mask) & 0xFF) ) + ( (((msb)&1) << 16) | (((data_mask) &0xFF) << 8) | ((clk_mask) & 0xFF) ) /* The following 4 ioctl's take a pointer as argument and handles * 32 bit ports (port G) properly. @@ -98,6 +132,48 @@ * *arg updated with current output pins. */ +/* The following ioctl's are applicable to the PWM channels only */ + +#define IO_PWM_SET_MODE 0x20 + +enum io_pwm_mode { + PWM_OFF = 0, /* disabled, deallocated */ + PWM_STANDARD = 1, /* 390 kHz, duty cycle 0..255/256 */ + PWM_FAST = 2, /* variable freq, w/ 10ns active pulse len */ + PWM_VARFREQ = 3 /* individually configurable high/low periods */ +}; + +struct io_pwm_set_mode { + enum io_pwm_mode mode; +}; + +/* Only for mode PWM_VARFREQ. Period lo/high set in increments of 10ns + * from 10ns (value = 0) to 81920ns (value = 8191) + * (Resulting frequencies range from 50 MHz (10ns + 10ns) down to + * 6.1 kHz (81920ns + 81920ns) at 50% duty cycle, to 12.2 kHz at min/max duty + * cycle (81920 + 10ns or 10ns + 81920ns, respectively).) + */ +#define IO_PWM_SET_PERIOD 0x21 + +struct io_pwm_set_period { + unsigned int lo; /* 0..8191 */ + unsigned int hi; /* 0..8191 */ +}; + +/* Only for modes PWM_STANDARD and PWM_FAST. + * For PWM_STANDARD, set duty cycle of 390 kHz PWM output signal, from + * 0 (value = 0) to 255/256 (value = 255). + * For PWM_FAST, set duty cycle of PWM output signal from + * 0% (value = 0) to 100% (value = 255). Output signal in this mode + * is a 10ns pulse surrounded by a high or low level depending on duty + * cycle (except for 0% and 100% which result in a constant output). + * Resulting output frequency varies from 50 MHz at 50% duty cycle, + * down to 390 kHz at min/max duty cycle. + */ +#define IO_PWM_SET_DUTY 0x22 +struct io_pwm_set_duty { + int duty; /* 0..255 */ +}; #endif diff --git a/include/asm-cris/io.h b/include/asm-cris/io.h index d196dd6b2df3..b87ce63f531f 100644 --- a/include/asm-cris/io.h +++ b/include/asm-cris/io.h @@ -122,8 +122,8 @@ static inline void writel(unsigned int b, volatile void __iomem *addr) #define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) -/* The following is junk needed for the arch-independent code but which - * we never use in the CRIS port +/* I/O port access. Normally there is no I/O space on CRIS but when + * Cardbus/PCI is enabled the request is passed through the bridge. */ #define IO_SPACE_LIMIT 0xffff diff --git a/include/asm-cris/pgtable.h b/include/asm-cris/pgtable.h index 417f71116215..a2607575681b 100644 --- a/include/asm-cris/pgtable.h +++ b/include/asm-cris/pgtable.h @@ -249,7 +249,7 @@ static inline pgd_t * pgd_offset(struct mm_struct * mm, unsigned long address) #define pte_unmap(pte) do { } while (0) #define pte_unmap_nested(pte) do { } while (0) #define pte_pfn(x) ((unsigned long)(__va((x).pte)) >> PAGE_SHIFT) -#define pfn_pte(pfn, prot) __pte((__pa((pfn) << PAGE_SHIFT)) | pgprot_val(prot)) +#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) #define pte_ERROR(e) \ printk("%s:%d: bad pte %p(%08lx).\n", __FILE__, __LINE__, &(e), pte_val(e)) diff --git a/include/asm-cris/rtc.h b/include/asm-cris/rtc.h index cb4bf9217fee..17d3019529e1 100644 --- a/include/asm-cris/rtc.h +++ b/include/asm-cris/rtc.h @@ -1,10 +1,7 @@ -/* $Id: rtc.h,v 1.7 2002/11/04 07:32:09 starvik Exp $ */ #ifndef __RTC_H__ #define __RTC_H__ - - #ifdef CONFIG_ETRAX_DS1302 /* Dallas DS1302 clock/calendar register numbers. */ # define RTC_SECONDS 0 @@ -17,17 +14,17 @@ # define RTC_CONTROL 7 /* Bits in CONTROL register. */ -# define RTC_CONTROL_WRITEPROTECT 0x80 -# define RTC_TRICKLECHARGER 8 - +# define RTC_CONTROL_WRITEPROTECT 0x80 +# define RTC_TRICKLECHARGER 8 + /* Bits in TRICKLECHARGER register TCS TCS TCS TCS DS DS RS RS. */ -# define RTC_TCR_PATTERN 0xA0 /* 1010xxxx */ -# define RTC_TCR_1DIOD 0x04 /* xxxx01xx */ -# define RTC_TCR_2DIOD 0x08 /* xxxx10xx */ -# define RTC_TCR_DISABLED 0x00 /* xxxxxx00 Disabled */ -# define RTC_TCR_2KOHM 0x01 /* xxxxxx01 2KOhm */ -# define RTC_TCR_4KOHM 0x02 /* xxxxxx10 4kOhm */ -# define RTC_TCR_8KOHM 0x03 /* xxxxxx11 8kOhm */ +# define RTC_TCR_PATTERN 0xA0 /* 1010xxxx */ +# define RTC_TCR_1DIOD 0x04 /* xxxx01xx */ +# define RTC_TCR_2DIOD 0x08 /* xxxx10xx */ +# define RTC_TCR_DISABLED 0x00 /* xxxxxx00 Disabled */ +# define RTC_TCR_2KOHM 0x01 /* xxxxxx01 2KOhm */ +# define RTC_TCR_4KOHM 0x02 /* xxxxxx10 4kOhm */ +# define RTC_TCR_8KOHM 0x03 /* xxxxxx11 8kOhm */ #elif defined(CONFIG_ETRAX_PCF8563) /* I2C bus slave registers. */ @@ -79,7 +76,7 @@ extern int pcf8563_init(void); /* * The struct used to pass data via the following ioctl. Similar to the - * struct tm in <time.h>, but it needs to be here so that the kernel + * struct tm in <time.h>, but it needs to be here so that the kernel * source is self contained, allowing cross-compiles, etc. etc. */ struct rtc_time { @@ -96,11 +93,15 @@ struct rtc_time { /* ioctl() calls that are permitted to the /dev/rtc interface. */ #define RTC_MAGIC 'p' -#define RTC_RD_TIME _IOR(RTC_MAGIC, 0x09, struct rtc_time) /* Read RTC time. */ -#define RTC_SET_TIME _IOW(RTC_MAGIC, 0x0a, struct rtc_time) /* Set RTC time. */ -#define RTC_SET_CHARGE _IOW(RTC_MAGIC, 0x0b, int) -#define RTC_VLOW_RD _IOR(RTC_MAGIC, 0x11, int) /* Voltage Low detector */ -#define RTC_VLOW_SET _IO(RTC_MAGIC, 0x12) /* Clear voltage low information */ -#define RTC_MAX_IOCTL 0x12 +/* Read RTC time. */ +#define RTC_RD_TIME _IOR(RTC_MAGIC, 0x09, struct rtc_time) +/* Set RTC time. */ +#define RTC_SET_TIME _IOW(RTC_MAGIC, 0x0a, struct rtc_time) +#define RTC_SET_CHARGE _IOW(RTC_MAGIC, 0x0b, int) +/* Voltage low detector */ +#define RTC_VL_READ _IOR(RTC_MAGIC, 0x13, int) +/* Clear voltage low information */ +#define RTC_VL_CLR _IO(RTC_MAGIC, 0x14) +#define RTC_MAX_IOCTL 0x14 #endif /* __RTC_H__ */ diff --git a/include/asm-cris/smp.h b/include/asm-cris/smp.h index dca5ef1d8c97..dba33aba3e95 100644 --- a/include/asm-cris/smp.h +++ b/include/asm-cris/smp.h @@ -4,8 +4,8 @@ #include <linux/cpumask.h> extern cpumask_t phys_cpu_present_map; -#define cpu_possible_map phys_cpu_present_map +extern cpumask_t cpu_possible_map; -#define __smp_processor_id() (current_thread_info()->cpu) +#define raw_smp_processor_id() (current_thread_info()->cpu) #endif diff --git a/include/asm-cris/sync_serial.h b/include/asm-cris/sync_serial.h index f930b6e00663..d87c24df2b38 100644 --- a/include/asm-cris/sync_serial.h +++ b/include/asm-cris/sync_serial.h @@ -67,6 +67,7 @@ /* Values for SSP_FRAME_SYNC */ #define NORMAL_SYNC 1 #define EARLY_SYNC 2 +#define SECOND_WORD_SYNC 0x40000 #define BIT_SYNC 4 #define WORD_SYNC 8 diff --git a/include/asm-cris/unistd.h b/include/asm-cris/unistd.h index bd57a7949170..007cb16a6b5b 100644 --- a/include/asm-cris/unistd.h +++ b/include/asm-cris/unistd.h @@ -326,9 +326,11 @@ #define __NR_epoll_pwait 319 #define __NR_utimensat 320 #define __NR_signalfd 321 -#define __NR_timerfd 322 +#define __NR_timerfd_create 322 #define __NR_eventfd 323 #define __NR_fallocate 324 +#define __NR_timerfd_settime 315 +#define __NR_timerfd_gettime 316 #ifdef __KERNEL__ |