summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/leds/Kconfig9
-rw-r--r--drivers/leds/Makefile1
-rw-r--r--drivers/leds/leds-ss4200.c552
3 files changed, 562 insertions, 0 deletions
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index e4f599f20e38..e481d3c52a54 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -236,6 +236,15 @@ config LEDS_BD2802
This option enables support for BD2802GU RGB LED driver chips
accessed via the I2C bus.
+config LEDS_INTEL_SS4200
+ tristate "LED driver for Intel NAS SS4200 series"
+ depends on LEDS_CLASS && PCI && DMI
+ help
+ This option enables support for the Intel SS4200 series of
+ Network Attached Storage servers. You may control the hard
+ drive or power LEDs on the front panel. Using this driver
+ can stop the front LED from blinking after startup.
+
comment "LED Triggers"
config LEDS_TRIGGERS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 46d72704d606..12b7a20fcfe0 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o
obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o
obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
obj-$(CONFIG_LEDS_PWM) += leds-pwm.o
+obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o
# LED SPI Drivers
obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
diff --git a/drivers/leds/leds-ss4200.c b/drivers/leds/leds-ss4200.c
new file mode 100644
index 000000000000..0ec4ec3bc823
--- /dev/null
+++ b/drivers/leds/leds-ss4200.c
@@ -0,0 +1,552 @@
+/*
+ * SS4200-E Hardware API
+ * Copyright (c) 2009, Intel Corporation.
+ * Copyright IBM Corporation, 2009
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Author: Dave Hansen <dave@sr71.net>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/dmi.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+
+MODULE_AUTHOR("Rodney Girod <rgirod@confocus.com>, Dave Hansen <dave@sr71.net>");
+MODULE_DESCRIPTION("Intel NAS/Home Server ICH7 GPIO Driver");
+MODULE_LICENSE("GPL");
+
+/*
+ * ICH7 LPC/GPIO PCI Config register offsets
+ */
+#define PMBASE 0x040
+#define GPIO_BASE 0x048
+#define GPIO_CTRL 0x04c
+#define GPIO_EN 0x010
+
+/*
+ * The ICH7 GPIO register block is 64 bytes in size.
+ */
+#define ICH7_GPIO_SIZE 64
+
+/*
+ * Define register offsets within the ICH7 register block.
+ */
+#define GPIO_USE_SEL 0x000
+#define GP_IO_SEL 0x004
+#define GP_LVL 0x00c
+#define GPO_BLINK 0x018
+#define GPI_INV 0x030
+#define GPIO_USE_SEL2 0x034
+#define GP_IO_SEL2 0x038
+#define GP_LVL2 0x03c
+
+/*
+ * PCI ID of the Intel ICH7 LPC Device within which the GPIO block lives.
+ */
+static struct pci_device_id ich7_lpc_pci_id[] =
+{
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_30) },
+ { } /* NULL entry */
+};
+
+MODULE_DEVICE_TABLE(pci, ich7_lpc_pci_id);
+
+static int __init ss4200_led_dmi_callback(const struct dmi_system_id *id)
+{
+ pr_info("detected '%s'\n", id->ident);
+ return 1;
+}
+
+static unsigned int __initdata nodetect;
+module_param_named(nodetect, nodetect, bool, 0);
+MODULE_PARM_DESC(nodetect, "Skip DMI-based hardware detection");
+
+/*
+ * struct nas_led_whitelist - List of known good models
+ *
+ * Contains the known good models this driver is compatible with.
+ * When adding a new model try to be as strict as possible. This
+ * makes it possible to keep the false positives (the model is
+ * detected as working, but in reality it is not) as low as
+ * possible.
+ */
+static struct dmi_system_id __initdata nas_led_whitelist[] = {
+ {
+ .callback = ss4200_led_dmi_callback,
+ .ident = "Intel SS4200-E",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Intel"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SS4200-E"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "1.00.00")
+ }
+ },
+};
+
+/*
+ * Base I/O address assigned to the Power Management register block
+ */
+static u32 g_pm_io_base;
+
+/*
+ * Base I/O address assigned to the ICH7 GPIO register block
+ */
+static u32 nas_gpio_io_base;
+
+/*
+ * When we successfully register a region, we are returned a resource.
+ * We use these to identify which regions we need to release on our way
+ * back out.
+ */
+static struct resource *gp_gpio_resource;
+
+struct nasgpio_led {
+ char *name;
+ u32 gpio_bit;
+ struct led_classdev led_cdev;
+};
+
+/*
+ * gpio_bit(s) are the ICH7 GPIO bit assignments
+ */
+static struct nasgpio_led nasgpio_leds[] = {
+ { .name = "hdd1:blue:sata", .gpio_bit = 0 },
+ { .name = "hdd1:amber:sata", .gpio_bit = 1 },
+ { .name = "hdd2:blue:sata", .gpio_bit = 2 },
+ { .name = "hdd2:amber:sata", .gpio_bit = 3 },
+ { .name = "hdd3:blue:sata", .gpio_bit = 4 },
+ { .name = "hdd3:amber:sata", .gpio_bit = 5 },
+ { .name = "hdd4:blue:sata", .gpio_bit = 6 },
+ { .name = "hdd4:amber:sata", .gpio_bit = 7 },
+ { .name = "power:blue:power", .gpio_bit = 27},
+ { .name = "power:amber:power", .gpio_bit = 28},
+};
+
+#define NAS_RECOVERY 0x00000400 /* GPIO10 */
+
+static struct nasgpio_led *
+led_classdev_to_nasgpio_led(struct led_classdev *led_cdev)
+{
+ return container_of(led_cdev, struct nasgpio_led, led_cdev);
+}
+
+static struct nasgpio_led *get_led_named(char *name)
+{
+ int i;
+ for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++) {
+ if (strcmp(nasgpio_leds[i].name, name))
+ continue;
+ return &nasgpio_leds[i];
+ }
+ return NULL;
+}
+
+/*
+ * This protects access to the gpio ports.
+ */
+static DEFINE_SPINLOCK(nasgpio_gpio_lock);
+
+/*
+ * There are two gpio ports, one for blinking and the other
+ * for power. @port tells us if we're doing blinking or
+ * power control.
+ *
+ * Caller must hold nasgpio_gpio_lock
+ */
+static void __nasgpio_led_set_attr(struct led_classdev *led_cdev,
+ u32 port, u32 value)
+{
+ struct nasgpio_led *led = led_classdev_to_nasgpio_led(led_cdev);
+ u32 gpio_out;
+
+ gpio_out = inl(nas_gpio_io_base + port);
+ if (value)
+ gpio_out |= (1<<led->gpio_bit);
+ else
+ gpio_out &= ~(1<<led->gpio_bit);
+
+ outl(gpio_out, nas_gpio_io_base + port);
+}
+
+static void nasgpio_led_set_attr(struct led_classdev *led_cdev,
+ u32 port, u32 value)
+{
+ spin_lock(&nasgpio_gpio_lock);
+ __nasgpio_led_set_attr(led_cdev, port, value);
+ spin_unlock(&nasgpio_gpio_lock);
+}
+
+u32 nasgpio_led_get_attr(struct led_classdev *led_cdev, u32 port)
+{
+ struct nasgpio_led *led = led_classdev_to_nasgpio_led(led_cdev);
+ u32 gpio_in;
+
+ spin_lock(&nasgpio_gpio_lock);
+ gpio_in = inl(nas_gpio_io_base + port);
+ spin_unlock(&nasgpio_gpio_lock);
+ if (gpio_in & (1<<led->gpio_bit))
+ return 1;
+ return 0;
+}
+
+/*
+ * There is actual brightness control in the hardware,
+ * but it is via smbus commands and not implemented
+ * in this driver.
+ */
+static void nasgpio_led_set_brightness(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ u32 setting = 0;
+ if (brightness >= LED_HALF)
+ setting = 1;
+ /*
+ * Hold the lock across both operations. This ensures
+ * consistency so that both the "turn off blinking"
+ * and "turn light off" operations complete as a set.
+ */
+ spin_lock(&nasgpio_gpio_lock);
+ /*
+ * LED class documentation asks that past blink state
+ * be disabled when brightness is turned to zero.
+ */
+ if (brightness == 0)
+ __nasgpio_led_set_attr(led_cdev, GPO_BLINK, 0);
+ __nasgpio_led_set_attr(led_cdev, GP_LVL, setting);
+ spin_unlock(&nasgpio_gpio_lock);
+}
+
+static int nasgpio_led_set_blink(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ u32 setting = 1;
+ if (!(*delay_on == 0 && *delay_off == 0) &&
+ !(*delay_on == 500 && *delay_off == 500))
+ return -EINVAL;
+ /*
+ * These are very approximate.
+ */
+ *delay_on = 500;
+ *delay_off = 500;
+
+ nasgpio_led_set_attr(led_cdev, GPO_BLINK, setting);
+
+ return 0;
+}
+
+
+/*
+ * Initialize the ICH7 GPIO registers for NAS usage. The BIOS should have
+ * already taken care of this, but we will do so in a non destructive manner
+ * so that we have what we need whether the BIOS did it or not.
+ */
+static int __devinit ich7_gpio_init(struct device *dev)
+{
+ int i;
+ u32 config_data = 0;
+ u32 all_nas_led = 0;
+
+ for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++)
+ all_nas_led |= (1<<nasgpio_leds[i].gpio_bit);
+
+ spin_lock(&nasgpio_gpio_lock);
+ /*
+ * We need to enable all of the GPIO lines used by the NAS box,
+ * so we will read the current Use Selection and add our usage
+ * to it. This should be benign with regard to the original
+ * BIOS configuration.
+ */
+ config_data = inl(nas_gpio_io_base + GPIO_USE_SEL);
+ dev_dbg(dev, ": Data read from GPIO_USE_SEL = 0x%08x\n", config_data);
+ config_data |= all_nas_led + NAS_RECOVERY;
+ outl(config_data, nas_gpio_io_base + GPIO_USE_SEL);
+ config_data = inl(nas_gpio_io_base + GPIO_USE_SEL);
+ dev_dbg(dev, ": GPIO_USE_SEL = 0x%08x\n\n", config_data);
+
+ /*
+ * The LED GPIO outputs need to be configured for output, so we
+ * will ensure that all LED lines are cleared for output and the
+ * RECOVERY line ready for input. This too should be benign with
+ * regard to BIOS configuration.
+ */
+ config_data = inl(nas_gpio_io_base + GP_IO_SEL);
+ dev_dbg(dev, ": Data read from GP_IO_SEL = 0x%08x\n",
+ config_data);
+ config_data &= ~all_nas_led;
+ config_data |= NAS_RECOVERY;
+ outl(config_data, nas_gpio_io_base + GP_IO_SEL);
+ config_data = inl(nas_gpio_io_base + GP_IO_SEL);
+ dev_dbg(dev, ": GP_IO_SEL = 0x%08x\n", config_data);
+
+ /*
+ * In our final system, the BIOS will initialize the state of all
+ * of the LEDs. For now, we turn them all off (or Low).
+ */
+ config_data = inl(nas_gpio_io_base + GP_LVL);
+ dev_dbg(dev, ": Data read from GP_LVL = 0x%08x\n", config_data);
+ /*
+ * In our final system, the BIOS will initialize the blink state of all
+ * of the LEDs. For now, we turn blink off for all of them.
+ */
+ config_data = inl(nas_gpio_io_base + GPO_BLINK);
+ dev_dbg(dev, ": Data read from GPO_BLINK = 0x%08x\n", config_data);
+
+ /*
+ * At this moment, I am unsure if anything needs to happen with GPI_INV
+ */
+ config_data = inl(nas_gpio_io_base + GPI_INV);
+ dev_dbg(dev, ": Data read from GPI_INV = 0x%08x\n", config_data);
+
+ spin_unlock(&nasgpio_gpio_lock);
+ return 0;
+}
+
+static void ich7_lpc_cleanup(struct device *dev)
+{
+ /*
+ * If we were given exclusive use of the GPIO
+ * I/O Address range, we must return it.
+ */
+ if (gp_gpio_resource) {
+ dev_dbg(dev, ": Releasing GPIO I/O addresses\n");
+ release_region(nas_gpio_io_base, ICH7_GPIO_SIZE);
+ gp_gpio_resource = NULL;
+ }
+}
+
+/*
+ * The OS has determined that the LPC of the Intel ICH7 Southbridge is present
+ * so we can retrive the required operational information and prepare the GPIO.
+ */
+static struct pci_dev *nas_gpio_pci_dev;
+static int __devinit ich7_lpc_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ int status = 0;
+ u32 gc = 0;
+
+ pci_enable_device(dev);
+
+ nas_gpio_pci_dev = dev;
+ status = pci_read_config_dword(dev, PMBASE, &g_pm_io_base);
+ if (status)
+ goto out;
+ g_pm_io_base &= 0x00000ff80;
+
+ status = pci_read_config_dword(dev, GPIO_CTRL, &gc);
+ if (!(GPIO_EN & gc)) {
+ status = -EEXIST;
+ dev_info(&dev->dev,
+ "ERROR: The LPC GPIO Block has not been enabled.\n");
+ goto out;
+ }
+
+ status = pci_read_config_dword(dev, GPIO_BASE, &nas_gpio_io_base);
+ if (0 > status) {
+ dev_info(&dev->dev, "Unable to read GPIOBASE.\n");
+ goto out;
+ }
+ dev_dbg(&dev->dev, ": GPIOBASE = 0x%08x\n", nas_gpio_io_base);
+ nas_gpio_io_base &= 0x00000ffc0;
+
+ /*
+ * Insure that we have exclusive access to the GPIO I/O address range.
+ */
+ gp_gpio_resource = request_region(nas_gpio_io_base, ICH7_GPIO_SIZE,
+ KBUILD_MODNAME);
+ if (NULL == gp_gpio_resource) {
+ dev_info(&dev->dev,
+ "ERROR Unable to register GPIO I/O addresses.\n");
+ status = -1;
+ goto out;
+ }
+
+ /*
+ * Initialize the GPIO for NAS/Home Server Use
+ */
+ ich7_gpio_init(&dev->dev);
+
+out:
+ if (status) {
+ ich7_lpc_cleanup(&dev->dev);
+ pci_disable_device(dev);
+ }
+ return status;
+}
+
+static void ich7_lpc_remove(struct pci_dev *dev)
+{
+ ich7_lpc_cleanup(&dev->dev);
+ pci_disable_device(dev);
+}
+
+/*
+ * pci_driver structure passed to the PCI modules
+ */
+static struct pci_driver nas_gpio_pci_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = ich7_lpc_pci_id,
+ .probe = ich7_lpc_probe,
+ .remove = ich7_lpc_remove,
+};
+
+static struct led_classdev *get_classdev_for_led_nr(int nr)
+{
+ struct nasgpio_led *nas_led = &nasgpio_leds[nr];
+ struct led_classdev *led = &nas_led->led_cdev;
+ return led;
+}
+
+
+static void set_power_light_amber_noblink(void)
+{
+ struct nasgpio_led *amber = get_led_named("power:amber:power");
+ struct nasgpio_led *blue = get_led_named("power:blue:power");
+
+ if (!amber || !blue)
+ return;
+ /*
+ * LED_OFF implies disabling future blinking
+ */
+ pr_debug("setting blue off and amber on\n");
+
+ nasgpio_led_set_brightness(&blue->led_cdev, LED_OFF);
+ nasgpio_led_set_brightness(&amber->led_cdev, LED_FULL);
+}
+
+static ssize_t nas_led_blink_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led = dev_get_drvdata(dev);
+ int blinking = 0;
+ if (nasgpio_led_get_attr(led, GPO_BLINK))
+ blinking = 1;
+ return sprintf(buf, "%u\n", blinking);
+}
+
+static ssize_t nas_led_blink_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ int ret;
+ struct led_classdev *led = dev_get_drvdata(dev);
+ unsigned long blink_state;
+
+ ret = strict_strtoul(buf, 10, &blink_state);
+ if (ret)
+ return ret;
+
+ nasgpio_led_set_attr(led, GPO_BLINK, blink_state);
+
+ return size;
+}
+
+static DEVICE_ATTR(blink, 0644, nas_led_blink_show, nas_led_blink_store);
+
+static int register_nasgpio_led(int led_nr)
+{
+ int ret;
+ struct nasgpio_led *nas_led = &nasgpio_leds[led_nr];
+ struct led_classdev *led = get_classdev_for_led_nr(led_nr);
+
+ led->name = nas_led->name;
+ led->brightness = LED_OFF;
+ if (nasgpio_led_get_attr(led, GP_LVL))
+ led->brightness = LED_FULL;
+ led->brightness_set = nasgpio_led_set_brightness;
+ led->blink_set = nasgpio_led_set_blink;
+ ret = led_classdev_register(&nas_gpio_pci_dev->dev, led);
+ if (ret)
+ return ret;
+ ret = device_create_file(led->dev, &dev_attr_blink);
+ if (ret)
+ led_classdev_unregister(led);
+ return ret;
+}
+
+static void unregister_nasgpio_led(int led_nr)
+{
+ struct led_classdev *led = get_classdev_for_led_nr(led_nr);
+ led_classdev_unregister(led);
+ device_remove_file(led->dev, &dev_attr_blink);
+}
+/*
+ * module load/initialization
+ */
+static int __init nas_gpio_init(void)
+{
+ int i;
+ int ret = 0;
+ int nr_devices = 0;
+
+ nr_devices = dmi_check_system(nas_led_whitelist);
+ if (nodetect) {
+ pr_info("skipping hardware autodetection\n");
+ pr_info("Please send 'dmidecode' output to dave@sr71.net\n");
+ nr_devices++;
+ }
+
+ if (nr_devices <= 0) {
+ pr_info("no LED devices found\n");
+ return -ENODEV;
+ }
+
+ pr_info("registering PCI driver\n");
+ ret = pci_register_driver(&nas_gpio_pci_driver);
+ if (ret)
+ return ret;
+ for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++) {
+ ret = register_nasgpio_led(i);
+ if (ret)
+ goto out_err;
+ }
+ /*
+ * When the system powers on, the BIOS leaves the power
+ * light blue and blinking. This will turn it solid
+ * amber once the driver is loaded.
+ */
+ set_power_light_amber_noblink();
+ return 0;
+out_err:
+ for (; i >= 0; i--)
+ unregister_nasgpio_led(i);
+ pci_unregister_driver(&nas_gpio_pci_driver);
+ return ret;
+}
+
+/*
+ * module unload
+ */
+static void __exit nas_gpio_exit(void)
+{
+ int i;
+ pr_info("Unregistering driver\n");
+ for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++)
+ unregister_nasgpio_led(i);
+ pci_unregister_driver(&nas_gpio_pci_driver);
+}
+
+module_init(nas_gpio_init);
+module_exit(nas_gpio_exit);