diff options
| -rw-r--r-- | drivers/ata/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/ata/Makefile | 1 | ||||
| -rw-r--r-- | drivers/ata/pata_at91.c | 361 |
3 files changed, 370 insertions, 0 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 2aa1908e5ce0..b17c57f85032 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -679,6 +679,14 @@ config PATA_PLATFORM If unsure, say N. +config PATA_AT91 + tristate "PATA support for AT91SAM9260" + depends on ARM && ARCH_AT91 + help + This option enables support for IDE devices on the Atmel AT91SAM9260 SoC. + + If unsure, say N. + config PATA_OF_PLATFORM tristate "OpenFirmware platform device PATA support" depends on PATA_PLATFORM && PPC_OF diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 1558059874f0..38906f9bbb4e 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -72,6 +72,7 @@ obj-$(CONFIG_PATA_SCH) += pata_sch.o obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o obj-$(CONFIG_PATA_OCTEON_CF) += pata_octeon_cf.o obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o +obj-$(CONFIG_PATA_AT91) += pata_at91.o obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o # Should be last but two libata driver diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c new file mode 100644 index 000000000000..4b27617be26d --- /dev/null +++ b/drivers/ata/pata_at91.c @@ -0,0 +1,361 @@ +/* + * PATA driver for AT91SAM9260 Static Memory Controller + * with CompactFlash interface in True IDE mode + * + * Copyright (C) 2009 Matyukevich Sergey + * + * Based on: + * * generic platform driver by Paul Mundt: drivers/ata/pata_platform.c + * * pata_at32 driver by Kristoffer Nyborg Gregertsen + * * at91_ide driver by Stanislaw Gruszka + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <scsi/scsi_host.h> +#include <linux/ata.h> +#include <linux/clk.h> +#include <linux/libata.h> +#include <linux/platform_device.h> +#include <linux/ata_platform.h> + +#include <mach/at91sam9260_matrix.h> +#include <mach/at91sam9_smc.h> +#include <mach/at91sam9260.h> +#include <mach/board.h> +#include <mach/gpio.h> + + +#define DRV_NAME "pata_at91" +#define DRV_VERSION "0.1" + +#define CF_IDE_OFFSET 0x00c00000 +#define CF_ALT_IDE_OFFSET 0x00e00000 +#define CF_IDE_RES_SIZE 0x08 + +struct at91_ide_info { + unsigned long mode; + unsigned int cs; + + void __iomem *ide_addr; + void __iomem *alt_addr; +}; + +const struct ata_timing initial_timing = + {XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0}; + +static unsigned int calc_mck_cycles(unsigned int ns, unsigned int mck_hz) +{ + unsigned long mul; + + /* + * cycles = x [nsec] * f [Hz] / 10^9 [ns in sec] = + * x * (f / 1_000_000_000) = + * x * ((f * 65536) / 1_000_000_000) / 65536 = + * x * (((f / 10_000) * 65536) / 100_000) / 65536 = + */ + + mul = (mck_hz / 10000) << 16; + mul /= 100000; + + return (ns * mul + 65536) >> 16; /* rounding */ +} + +static void set_smc_mode(struct at91_ide_info *info) +{ + at91_sys_write(AT91_SMC_MODE(info->cs), info->mode); + return; +} + +static void set_smc_timing(struct device *dev, + struct at91_ide_info *info, const struct ata_timing *ata) +{ + int read_cycle, write_cycle, active, recover; + int nrd_setup, nrd_pulse, nrd_recover; + int nwe_setup, nwe_pulse; + + int ncs_write_setup, ncs_write_pulse; + int ncs_read_setup, ncs_read_pulse; + + unsigned int mck_hz; + struct clk *mck; + + read_cycle = ata->cyc8b; + nrd_setup = ata->setup; + nrd_pulse = ata->act8b; + nrd_recover = ata->rec8b; + + mck = clk_get(NULL, "mck"); + BUG_ON(IS_ERR(mck)); + mck_hz = clk_get_rate(mck); + + read_cycle = calc_mck_cycles(read_cycle, mck_hz); + nrd_setup = calc_mck_cycles(nrd_setup, mck_hz); + nrd_pulse = calc_mck_cycles(nrd_pulse, mck_hz); + nrd_recover = calc_mck_cycles(nrd_recover, mck_hz); + + clk_put(mck); + + active = nrd_setup + nrd_pulse; + recover = read_cycle - active; + + /* Need at least two cycles recovery */ + if (recover < 2) + read_cycle = active + 2; + + /* (CS0, CS1, DIR, OE) <= (CFCE1, CFCE2, CFRNW, NCSX) timings */ + ncs_read_setup = 1; + ncs_read_pulse = read_cycle - 2; + + /* Write timings same as read timings */ + write_cycle = read_cycle; + nwe_setup = nrd_setup; + nwe_pulse = nrd_pulse; + ncs_write_setup = ncs_read_setup; + ncs_write_pulse = ncs_read_pulse; + + dev_dbg(dev, "ATA timings: nrd_setup = %d nrd_pulse = %d nrd_cycle = %d\n", + nrd_setup, nrd_pulse, read_cycle); + dev_dbg(dev, "ATA timings: nwe_setup = %d nwe_pulse = %d nwe_cycle = %d\n", + nwe_setup, nwe_pulse, write_cycle); + dev_dbg(dev, "ATA timings: ncs_read_setup = %d ncs_read_pulse = %d\n", + ncs_read_setup, ncs_read_pulse); + dev_dbg(dev, "ATA timings: ncs_write_setup = %d ncs_write_pulse = %d\n", + ncs_write_setup, ncs_write_pulse); + + at91_sys_write(AT91_SMC_SETUP(info->cs), + AT91_SMC_NWESETUP_(nwe_setup) | + AT91_SMC_NRDSETUP_(nrd_setup) | + AT91_SMC_NCS_WRSETUP_(ncs_write_setup) | + AT91_SMC_NCS_RDSETUP_(ncs_read_setup)); + + at91_sys_write(AT91_SMC_PULSE(info->cs), + AT91_SMC_NWEPULSE_(nwe_pulse) | + AT91_SMC_NRDPULSE_(nrd_pulse) | + AT91_SMC_NCS_WRPULSE_(ncs_write_pulse) | + AT91_SMC_NCS_RDPULSE_(ncs_read_pulse)); + + at91_sys_write(AT91_SMC_CYCLE(info->cs), + AT91_SMC_NWECYCLE_(write_cycle) | + AT91_SMC_NRDCYCLE_(read_cycle)); + + return; +} + +static void pata_at91_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct at91_ide_info *info = ap->host->private_data; + struct ata_timing timing; + int ret; + + /* Compute ATA timing and set it to SMC */ + ret = ata_timing_compute(adev, adev->pio_mode, &timing, 1000, 0); + if (ret) { + dev_warn(ap->dev, "Failed to compute ATA timing %d, \ + set PIO_0 timing\n", ret); + set_smc_timing(ap->dev, info, &initial_timing); + } else { + set_smc_timing(ap->dev, info, &timing); + } + + /* Setup SMC mode */ + set_smc_mode(info); + + return; +} + +static unsigned int pata_at91_data_xfer_noirq(struct ata_device *dev, + unsigned char *buf, unsigned int buflen, int rw) +{ + struct at91_ide_info *info = dev->link->ap->host->private_data; + unsigned int consumed; + unsigned long flags; + unsigned int mode; + + local_irq_save(flags); + mode = at91_sys_read(AT91_SMC_MODE(info->cs)); + + /* set 16bit mode before writing data */ + at91_sys_write(AT91_SMC_MODE(info->cs), + (mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_16); + + consumed = ata_sff_data_xfer(dev, buf, buflen, rw); + + /* restore 8bit mode after data is written */ + at91_sys_write(AT91_SMC_MODE(info->cs), + (mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_8); + + local_irq_restore(flags); + return consumed; +} + +static struct scsi_host_template pata_at91_sht = { + ATA_PIO_SHT(DRV_NAME), +}; + +static struct ata_port_operations pata_at91_port_ops = { + .inherits = &ata_sff_port_ops, + + .sff_data_xfer = pata_at91_data_xfer_noirq, + .set_piomode = pata_at91_set_piomode, + .cable_detect = ata_cable_40wire, + .port_start = ATA_OP_NULL, +}; + +static int __devinit pata_at91_probe(struct platform_device *pdev) +{ + struct at91_cf_data *board = pdev->dev.platform_data; + struct device *dev = &pdev->dev; + struct at91_ide_info *info; + struct resource *mem_res; + struct ata_host *host; + struct ata_port *ap; + int irq_flags = 0; + int irq = 0; + int ret; + + /* get platform resources: IO/CTL memories and irq/rst pins */ + + if (pdev->num_resources != 1) { + dev_err(&pdev->dev, "invalid number of resources\n"); + return -EINVAL; + } + + mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + if (!mem_res) { + dev_err(dev, "failed to get mem resource\n"); + return -EINVAL; + } + + irq = board->irq_pin; + + /* init ata host */ + + host = ata_host_alloc(dev, 1); + + if (!host) + return -ENOMEM; + + ap = host->ports[0]; + ap->ops = &pata_at91_port_ops; + ap->flags |= ATA_FLAG_SLAVE_POSS; + ap->pio_mask = ATA_PIO4; + + if (!irq) { + ap->flags |= ATA_FLAG_PIO_POLLING; + ata_port_desc(ap, "no IRQ, using PIO polling"); + } + + info = kzalloc(sizeof(*info), GFP_KERNEL); + + if (!info) { + dev_err(dev, "failed to allocate memory for private data\n"); + return -ENOMEM; + } + + info->cs = board->chipselect; + info->mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_EXNWMODE_READY | AT91_SMC_BAT_SELECT | + AT91_SMC_DBW_8 | AT91_SMC_TDF_(0); + + info->ide_addr = devm_ioremap(dev, + mem_res->start + CF_IDE_OFFSET, CF_IDE_RES_SIZE); + + if (!info->ide_addr) { + dev_err(dev, "failed to map IO base\n"); + ret = -ENOMEM; + goto err_ide_ioremap; + } + + info->alt_addr = devm_ioremap(dev, + mem_res->start + CF_ALT_IDE_OFFSET, CF_IDE_RES_SIZE); + + if (!info->alt_addr) { + dev_err(dev, "failed to map CTL base\n"); + ret = -ENOMEM; + goto err_alt_ioremap; + } + + ap->ioaddr.cmd_addr = info->ide_addr; + ap->ioaddr.ctl_addr = info->alt_addr + 0x06; + ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr; + + ata_sff_std_ports(&ap->ioaddr); + + ata_port_desc(ap, "mmio cmd 0x%llx ctl 0x%llx", + (unsigned long long)mem_res->start + CF_IDE_OFFSET, + (unsigned long long)mem_res->start + CF_ALT_IDE_OFFSET); + + host->private_data = info; + + return ata_host_activate(host, irq ? gpio_to_irq(irq) : 0, + irq ? ata_sff_interrupt : NULL, + irq_flags, &pata_at91_sht); + +err_alt_ioremap: + devm_iounmap(dev, info->ide_addr); + +err_ide_ioremap: + kfree(info); + + return ret; +} + +static int __devexit pata_at91_remove(struct platform_device *pdev) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + struct at91_ide_info *info = host->private_data; + struct device *dev = &pdev->dev; + + if (!host) + return 0; + + ata_host_detach(host); + + if (!info) + return 0; + + devm_iounmap(dev, info->ide_addr); + devm_iounmap(dev, info->alt_addr); + + kfree(info); + return 0; +} + +static struct platform_driver pata_at91_driver = { + .probe = pata_at91_probe, + .remove = __devexit_p(pata_at91_remove), + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init pata_at91_init(void) +{ + return platform_driver_register(&pata_at91_driver); +} + +static void __exit pata_at91_exit(void) +{ + platform_driver_unregister(&pata_at91_driver); +} + + +module_init(pata_at91_init); +module_exit(pata_at91_exit); + + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Driver for CF in True IDE mode on AT91SAM9260 SoC"); +MODULE_AUTHOR("Matyukevich Sergey"); +MODULE_VERSION(DRV_VERSION); + |