diff options
| -rw-r--r-- | Documentation/devicetree/bindings/gpio/gpio_lpc32xx.txt | 43 | ||||
| -rw-r--r-- | arch/arm/mach-lpc32xx/include/mach/gpio.h | 9 | ||||
| -rw-r--r-- | drivers/gpio/gpio-lpc32xx.c | 52 |
3 files changed, 102 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/gpio/gpio_lpc32xx.txt b/Documentation/devicetree/bindings/gpio/gpio_lpc32xx.txt new file mode 100644 index 000000000000..49819367a011 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio_lpc32xx.txt @@ -0,0 +1,43 @@ +NXP LPC32xx SoC GPIO controller + +Required properties: +- compatible: must be "nxp,lpc3220-gpio" +- reg: Physical base address and length of the controller's registers. +- gpio-controller: Marks the device node as a GPIO controller. +- #gpio-cells: Should be 3: + 1) bank: + 0: GPIO P0 + 1: GPIO P1 + 2: GPIO P2 + 3: GPIO P3 + 4: GPI P3 + 5: GPO P3 + 2) pin number + 3) optional parameters: + - bit 0 specifies polarity (0 for normal, 1 for inverted) +- reg: Index of the GPIO group + +Example: + + gpio: gpio@40028000 { + compatible = "nxp,lpc3220-gpio"; + reg = <0x40028000 0x1000>; + gpio-controller; + #gpio-cells = <3>; /* bank, pin, flags */ + }; + + leds { + compatible = "gpio-leds"; + + led0 { + gpios = <&gpio 5 1 1>; /* GPO_P3 1, active low */ + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led1 { + gpios = <&gpio 5 14 1>; /* GPO_P3 14, active low */ + linux,default-trigger = "timer"; + default-state = "off"; + }; + }; diff --git a/arch/arm/mach-lpc32xx/include/mach/gpio.h b/arch/arm/mach-lpc32xx/include/mach/gpio.h index 40a8c178f10d..2ba6ca412bef 100644 --- a/arch/arm/mach-lpc32xx/include/mach/gpio.h +++ b/arch/arm/mach-lpc32xx/include/mach/gpio.h @@ -1 +1,8 @@ -/* empty */ +#ifndef __MACH_GPIO_H +#define __MACH_GPIO_H + +#include "gpio-lpc32xx.h" + +#define ARCH_NR_GPIOS (LPC32XX_GPO_P3_GRP + LPC32XX_GPO_P3_MAX) + +#endif /* __MACH_GPIO_H */ diff --git a/drivers/gpio/gpio-lpc32xx.c b/drivers/gpio/gpio-lpc32xx.c index 61c2d08d37b6..c2199beca98a 100644 --- a/drivers/gpio/gpio-lpc32xx.c +++ b/drivers/gpio/gpio-lpc32xx.c @@ -21,6 +21,9 @@ #include <linux/io.h> #include <linux/errno.h> #include <linux/gpio.h> +#include <linux/of_gpio.h> +#include <linux/platform_device.h> +#include <linux/module.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -454,10 +457,57 @@ static struct lpc32xx_gpio_chip lpc32xx_gpiochip[] = { }, }; +/* Empty now, can be removed later when mach-lpc32xx is finally switched over + * to DT support + */ void __init lpc32xx_gpio_init(void) { +} + +static int lpc32xx_of_xlate(struct gpio_chip *gc, + const struct of_phandle_args *gpiospec, u32 *flags) +{ + /* Is this the correct bank? */ + u32 bank = gpiospec->args[0]; + if ((bank > ARRAY_SIZE(lpc32xx_gpiochip) || + (gc != &lpc32xx_gpiochip[bank].chip))) + return -EINVAL; + + if (flags) + *flags = gpiospec->args[2]; + return gpiospec->args[1]; +} + +static int __devinit lpc32xx_gpio_probe(struct platform_device *pdev) +{ int i; - for (i = 0; i < ARRAY_SIZE(lpc32xx_gpiochip); i++) + for (i = 0; i < ARRAY_SIZE(lpc32xx_gpiochip); i++) { + if (pdev->dev.of_node) { + lpc32xx_gpiochip[i].chip.of_xlate = lpc32xx_of_xlate; + lpc32xx_gpiochip[i].chip.of_gpio_n_cells = 3; + lpc32xx_gpiochip[i].chip.of_node = pdev->dev.of_node; + } gpiochip_add(&lpc32xx_gpiochip[i].chip); + } + + return 0; } + +#ifdef CONFIG_OF +static struct of_device_id lpc32xx_gpio_of_match[] __devinitdata = { + { .compatible = "nxp,lpc3220-gpio", }, + { }, +}; +#endif + +static struct platform_driver lpc32xx_gpio_driver = { + .driver = { + .name = "lpc32xx-gpio", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(lpc32xx_gpio_of_match), + }, + .probe = lpc32xx_gpio_probe, +}; + +module_platform_driver(lpc32xx_gpio_driver); |