summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/powerpc/booting-without-of.txt40
-rw-r--r--arch/powerpc/Kconfig.debug6
-rw-r--r--arch/powerpc/boot/cpm-serial.c44
-rw-r--r--arch/powerpc/boot/dts/ep88xc.dts13
-rw-r--r--arch/powerpc/boot/dts/mpc8272ads.dts11
-rw-r--r--arch/powerpc/boot/dts/mpc885ads.dts13
-rw-r--r--arch/powerpc/boot/dts/pq2fads.dts13
-rw-r--r--arch/powerpc/sysdev/commproc.c11
-rw-r--r--arch/powerpc/sysdev/cpm2_common.c35
-rw-r--r--arch/powerpc/sysdev/cpm_common.c159
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_cpm2.c4
-rw-r--r--include/asm-powerpc/commproc.h12
-rw-r--r--include/asm-powerpc/cpm.h14
-rw-r--r--include/asm-powerpc/cpm2.h10
14 files changed, 337 insertions, 48 deletions
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index c36dcd2fbdc4..ce5d67f5cb5c 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1861,9 +1861,7 @@ platforms are moved over to use the flattened-device-tree model.
Properties:
- compatible : "fsl,cpm1", "fsl,cpm2", or "fsl,qe".
- - reg : The first resource is a 48-byte region beginning with
- CPCR. The second is the available general-purpose
- DPRAM.
+ - reg : A 48-byte region beginning with CPCR.
Example:
cpm@119c0 {
@@ -1871,7 +1869,7 @@ platforms are moved over to use the flattened-device-tree model.
#size-cells = <1>;
#interrupt-cells = <2>;
compatible = "fsl,mpc8272-cpm", "fsl,cpm2";
- reg = <119c0 30 0 2000>;
+ reg = <119c0 30>;
}
ii) Properties common to mulitple CPM/QE devices
@@ -2017,6 +2015,40 @@ platforms are moved over to use the flattened-device-tree model.
fsl,cpm-command = <2e600000>;
};
+ viii) Multi-User RAM (MURAM)
+
+ The multi-user/dual-ported RAM is expressed as a bus under the CPM node.
+
+ Ranges must be set up subject to the following restrictions:
+
+ - Children's reg nodes must be offsets from the start of all muram, even
+ if the user-data area does not begin at zero.
+ - If multiple range entries are used, the difference between the parent
+ address and the child address must be the same in all, so that a single
+ mapping can cover them all while maintaining the ability to determine
+ CPM-side offsets with pointer subtraction. It is recommended that
+ multiple range entries not be used.
+ - A child address of zero must be translatable, even if no reg resources
+ contain it.
+
+ A child "data" node must exist, compatible with "fsl,cpm-muram-data", to
+ indicate the portion of muram that is usable by the OS for arbitrary
+ purposes. The data node may have an arbitrary number of reg resources,
+ all of which contribute to the allocatable muram pool.
+
+ Example, based on mpc8272:
+
+ muram@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 10000>;
+
+ data@0 {
+ compatible = "fsl,cpm-muram-data";
+ reg = <0 2000 9800 800>;
+ };
+ };
+
m) Chipselect/Local Bus
Properties:
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index f4e5d22312a0..464f9b4b3169 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -245,9 +245,9 @@ config PPC_EARLY_DEBUG_44x_PHYSHIGH
config PPC_EARLY_DEBUG_CPM_ADDR
hex "CPM UART early debug transmit descriptor address"
depends on PPC_EARLY_DEBUG_CPM
- default "0xfa202808" if PPC_EP88XC
- default "0xf0000808" if CPM2
- default "0xff002808" if CPM1
+ default "0xfa202008" if PPC_EP88XC
+ default "0xf0000008" if CPM2
+ default "0xff002008" if CPM1
help
This specifies the address of the transmit descriptor
used for early debug output. Because it is needed before
diff --git a/arch/powerpc/boot/cpm-serial.c b/arch/powerpc/boot/cpm-serial.c
index fcb8b5e956bd..28296facb2ae 100644
--- a/arch/powerpc/boot/cpm-serial.c
+++ b/arch/powerpc/boot/cpm-serial.c
@@ -56,7 +56,8 @@ static struct cpm_smc *smc;
static struct cpm_scc *scc;
struct cpm_bd *tbdf, *rbdf;
static u32 cpm_cmd;
-static u8 *dpram_start;
+static u8 *muram_start;
+static u32 muram_offset;
static void (*do_cmd)(int op);
static void (*enable_port)(void);
@@ -114,13 +115,12 @@ static void scc_enable_port(void)
static int cpm_serial_open(void)
{
- int dpaddr = 0x800;
disable_port();
out_8(&param->rfcr, 0x10);
out_8(&param->tfcr, 0x10);
- rbdf = (struct cpm_bd *)(dpram_start + dpaddr);
+ rbdf = (struct cpm_bd *)muram_start;
rbdf->addr = (u8 *)(rbdf + 2);
rbdf->sc = 0xa000;
rbdf->len = 1;
@@ -131,8 +131,8 @@ static int cpm_serial_open(void)
tbdf->len = 1;
sync();
- out_be16(&param->rbase, dpaddr);
- out_be16(&param->tbase, dpaddr + sizeof(struct cpm_bd));
+ out_be16(&param->rbase, muram_offset);
+ out_be16(&param->tbase, muram_offset + sizeof(struct cpm_bd));
do_cmd(CPM_CMD_INIT_RX_TX);
@@ -178,7 +178,7 @@ int cpm_console_init(void *devp, struct serial_console_data *scdp)
void *reg_virt[2];
int is_smc = 0, is_cpm2 = 0, n;
unsigned long reg_phys;
- void *parent;
+ void *parent, *muram;
if (dt_is_compatible(devp, "fsl,cpm1-smc-uart")) {
is_smc = 1;
@@ -229,16 +229,36 @@ int cpm_console_init(void *devp, struct serial_console_data *scdp)
n = getprop(parent, "virtual-reg", reg_virt, sizeof(reg_virt));
if (n < (int)sizeof(reg_virt)) {
- for (n = 0; n < 2; n++) {
- if (!dt_xlate_reg(parent, n, &reg_phys, NULL))
- return -1;
+ if (!dt_xlate_reg(parent, 0, &reg_phys, NULL))
+ return -1;
- reg_virt[n] = (void *)reg_phys;
- }
+ reg_virt[0] = (void *)reg_phys;
}
cpcr = reg_virt[0];
- dpram_start = reg_virt[1];
+
+ muram = finddevice("/soc/cpm/muram/data");
+ if (!muram)
+ return -1;
+
+ /* For bootwrapper-compatible device trees, we assume that the first
+ * entry has at least 18 bytes, and that #address-cells/#data-cells
+ * is one for both parent and child.
+ */
+
+ n = getprop(muram, "virtual-reg", reg_virt, sizeof(reg_virt));
+ if (n < (int)sizeof(reg_virt)) {
+ if (!dt_xlate_reg(muram, 0, &reg_phys, NULL))
+ return -1;
+
+ reg_virt[0] = (void *)reg_phys;
+ }
+
+ muram_start = reg_virt[0];
+
+ n = getprop(muram, "reg", &muram_offset, 4);
+ if (n < 4)
+ return -1;
scdp->open = cpm_serial_open;
scdp->putc = cpm_serial_putc;
diff --git a/arch/powerpc/boot/dts/ep88xc.dts b/arch/powerpc/boot/dts/ep88xc.dts
index 0406fc50b2af..02705f299790 100644
--- a/arch/powerpc/boot/dts/ep88xc.dts
+++ b/arch/powerpc/boot/dts/ep88xc.dts
@@ -142,9 +142,20 @@
command-proc = <9c0>;
interrupts = <0>; // cpm error interrupt
interrupt-parent = <&CPM_PIC>;
- reg = <9c0 40 2000 1c00>;
+ reg = <9c0 40>;
ranges;
+ muram@2000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 2000 2000>;
+
+ data@0 {
+ compatible = "fsl,cpm-muram-data";
+ reg = <0 1c00>;
+ };
+ };
+
brg@9f0 {
compatible = "fsl,mpc885-brg",
"fsl,cpm1-brg",
diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts
index 3fe991d4cb03..188179df0845 100644
--- a/arch/powerpc/boot/dts/mpc8272ads.dts
+++ b/arch/powerpc/boot/dts/mpc8272ads.dts
@@ -124,6 +124,17 @@
reg = <119c0 30 0 2000>;
ranges;
+ muram@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 10000>;
+
+ data@0 {
+ compatible = "fsl,cpm-muram-data";
+ reg = <0 2000 9800 800>;
+ };
+ };
+
brg@119f0 {
compatible = "fsl,mpc8272-brg",
"fsl,cpm2-brg",
diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts
index cbcd16f74c45..8848e637293e 100644
--- a/arch/powerpc/boot/dts/mpc885ads.dts
+++ b/arch/powerpc/boot/dts/mpc885ads.dts
@@ -148,9 +148,20 @@
command-proc = <9c0>;
interrupts = <0>; // cpm error interrupt
interrupt-parent = <&CPM_PIC>;
- reg = <9c0 40 2000 1c00>;
+ reg = <9c0 40>;
ranges;
+ muram@2000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 2000 2000>;
+
+ data@0 {
+ compatible = "fsl,cpm-muram-data";
+ reg = <0 1c00>;
+ };
+ };
+
brg@9f0 {
compatible = "fsl,mpc885-brg",
"fsl,cpm1-brg",
diff --git a/arch/powerpc/boot/dts/pq2fads.dts b/arch/powerpc/boot/dts/pq2fads.dts
index 54e8bd1ae22f..2d564921897a 100644
--- a/arch/powerpc/boot/dts/pq2fads.dts
+++ b/arch/powerpc/boot/dts/pq2fads.dts
@@ -119,9 +119,20 @@
#size-cells = <1>;
#interrupt-cells = <2>;
compatible = "fsl,mpc8280-cpm", "fsl,cpm2";
- reg = <119c0 30 0 2000>;
+ reg = <119c0 30>;
ranges;
+ muram@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 10000>;
+
+ data@0 {
+ compatible = "fsl,cpm-muram-data";
+ reg = <0 2000 9800 800>;
+ };
+ };
+
brg@119f0 {
compatible = "fsl,mpc8280-brg",
"fsl,cpm2-brg",
diff --git a/arch/powerpc/sysdev/commproc.c b/arch/powerpc/sysdev/commproc.c
index 428eb8c151b9..f6a63780bbde 100644
--- a/arch/powerpc/sysdev/commproc.c
+++ b/arch/powerpc/sysdev/commproc.c
@@ -39,12 +39,15 @@
#include <asm/tlbflush.h>
#include <asm/rheap.h>
#include <asm/prom.h>
+#include <asm/cpm.h>
#include <asm/fs_pd.h>
#define CPM_MAP_SIZE (0x4000)
+#ifndef CONFIG_PPC_CPM_NEW_BINDING
static void m8xx_cpm_dpinit(void);
+#endif
static uint host_buffer; /* One page of host buffer */
static uint host_end; /* end + 1 */
cpm8xx_t __iomem *cpmp; /* Pointer to comm processor space */
@@ -193,7 +196,7 @@ end:
return sirq;
}
-void cpm_reset(void)
+void __init cpm_reset(void)
{
sysconf8xx_t __iomem *siu_conf;
@@ -229,8 +232,12 @@ void cpm_reset(void)
out_be32(&siu_conf->sc_sdcr, 1);
immr_unmap(siu_conf);
+#ifdef CONFIG_PPC_CPM_NEW_BINDING
+ cpm_muram_init();
+#else
/* Reclaim the DP memory for our use. */
m8xx_cpm_dpinit();
+#endif
}
/* We used to do this earlier, but have to postpone as long as possible
@@ -296,6 +303,7 @@ cpm_setbrg(uint brg, uint rate)
CPM_BRG_EN | CPM_BRG_DIV16);
}
+#ifndef CONFIG_PPC_CPM_NEW_BINDING
/*
* dpalloc / dpfree bits.
*/
@@ -397,6 +405,7 @@ uint cpm_dpram_phys(u8 *addr)
return (dpram_pbase + (uint)(addr - dpram_vbase));
}
EXPORT_SYMBOL(cpm_dpram_phys);
+#endif /* !CONFIG_PPC_CPM_NEW_BINDING */
struct cpm_ioport16 {
__be16 dir, par, sor, dat, intr;
diff --git a/arch/powerpc/sysdev/cpm2_common.c b/arch/powerpc/sysdev/cpm2_common.c
index fc4c99565381..859362fecb7c 100644
--- a/arch/powerpc/sysdev/cpm2_common.c
+++ b/arch/powerpc/sysdev/cpm2_common.c
@@ -46,7 +46,10 @@
#include <sysdev/fsl_soc.h>
+#ifndef CONFIG_PPC_CPM_NEW_BINDING
static void cpm2_dpinit(void);
+#endif
+
cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor space */
/* We allocate this here because it is used almost exclusively for
@@ -69,7 +72,11 @@ cpm2_reset(void)
/* Reclaim the DP memory for our use.
*/
+#ifdef CONFIG_PPC_CPM_NEW_BINDING
+ cpm_muram_init();
+#else
cpm2_dpinit();
+#endif
/* Tell everyone where the comm processor resides.
*/
@@ -316,6 +323,7 @@ int cpm2_smc_clk_setup(enum cpm_clk_target target, int clock)
return ret;
}
+#ifndef CONFIG_PPC_CPM_NEW_BINDING
/*
* dpalloc / dpfree bits.
*/
@@ -328,28 +336,6 @@ static u8 __iomem *im_dprambase;
static void cpm2_dpinit(void)
{
- struct resource r;
-
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
- struct device_node *np;
-
- np = of_find_compatible_node(NULL, NULL, "fsl,cpm2");
- if (!np)
- panic("Cannot find CPM2 node");
-
- if (of_address_to_resource(np, 1, &r))
- panic("Cannot get CPM2 resource 1");
-
- of_node_put(np);
-#else
- r.start = CPM_MAP_ADDR;
- r.end = r.start + CPM_DATAONLY_BASE + CPM_DATAONLY_SIZE - 1;
-#endif
-
- im_dprambase = ioremap(r.start, r.end - r.start + 1);
- if (!im_dprambase)
- panic("Cannot map DPRAM");
-
spin_lock_init(&cpm_dpmem_lock);
/* initialize the info header */
@@ -358,13 +344,15 @@ static void cpm2_dpinit(void)
sizeof(cpm_boot_dpmem_rh_block[0]),
cpm_boot_dpmem_rh_block);
+ im_dprambase = cpm2_immr;
+
/* Attach the usable dpmem area */
/* XXX: This is actually crap. CPM_DATAONLY_BASE and
* CPM_DATAONLY_SIZE is only a subset of the available dpram. It
* varies with the processor and the microcode patches activated.
* But the following should be at least safe.
*/
- rh_attach_region(&cpm_dpmem_info, 0, r.end - r.start + 1);
+ rh_attach_region(&cpm_dpmem_info, CPM_DATAONLY_BASE, CPM_DATAONLY_SIZE);
}
/* This function returns an index into the DPRAM area.
@@ -422,6 +410,7 @@ void *cpm_dpram_addr(unsigned long offset)
return (void *)(im_dprambase + offset);
}
EXPORT_SYMBOL(cpm_dpram_addr);
+#endif /* !CONFIG_PPC_CPM_NEW_BINDING */
struct cpm2_ioports {
u32 dir, par, sor, odr, dat;
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index 9daa6ac67676..66c8ad4cfce6 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -5,15 +5,27 @@
*
* Copyright 2007 Freescale Semiconductor, Inc.
*
+ * Some parts derived from commproc.c/cpm2_common.c, which is:
+ * Copyright (c) 1997 Dan error_act (dmalek@jlc.net)
+ * Copyright (c) 1999-2001 Dan Malek <dan@embeddedalley.com>
+ * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
+ * 2006 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
+#include <linux/of_device.h>
+
#include <asm/udbg.h>
#include <asm/io.h>
#include <asm/system.h>
+#include <asm/rheap.h>
+#include <asm/cpm.h>
+
#include <mm/mmu_decl.h>
#ifdef CONFIG_PPC_EARLY_DEBUG_CPM
@@ -41,6 +53,153 @@ void __init udbg_init_cpm(void)
setbat(1, 0xf0000000, 0xf0000000, 1024*1024, _PAGE_IO);
#endif
udbg_putc = udbg_putc_cpm;
+ udbg_putc('X');
}
}
#endif
+
+#ifdef CONFIG_PPC_CPM_NEW_BINDING
+static spinlock_t cpm_muram_lock;
+static rh_block_t cpm_boot_muram_rh_block[16];
+static rh_info_t cpm_muram_info;
+static u8 __iomem *muram_vbase;
+static phys_addr_t muram_pbase;
+
+/* Max address size we deal with */
+#define OF_MAX_ADDR_CELLS 4
+
+int __init cpm_muram_init(void)
+{
+ struct device_node *np;
+ struct resource r;
+ u32 zero[OF_MAX_ADDR_CELLS] = {};
+ resource_size_t max = 0;
+ int i = 0;
+ int ret = 0;
+
+ printk("cpm_muram_init\n");
+
+ spin_lock_init(&cpm_muram_lock);
+ /* initialize the info header */
+ rh_init(&cpm_muram_info, 1,
+ sizeof(cpm_boot_muram_rh_block) /
+ sizeof(cpm_boot_muram_rh_block[0]),
+ cpm_boot_muram_rh_block);
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,cpm-muram-data");
+ if (!np) {
+ printk(KERN_ERR "Cannot find CPM muram data node");
+ ret = -ENODEV;
+ goto out;
+ }
+
+ muram_pbase = of_translate_address(np, zero);
+ if (muram_pbase == (phys_addr_t)OF_BAD_ADDR) {
+ printk(KERN_ERR "Cannot translate zero through CPM muram node");
+ ret = -ENODEV;
+ goto out;
+ }
+
+ while (of_address_to_resource(np, i++, &r) == 0) {
+ if (r.end > max)
+ max = r.end;
+
+ rh_attach_region(&cpm_muram_info, r.start - muram_pbase,
+ r.end - r.start + 1);
+ }
+
+ muram_vbase = ioremap(muram_pbase, max - muram_pbase + 1);
+ if (!muram_vbase) {
+ printk(KERN_ERR "Cannot map CPM muram");
+ ret = -ENOMEM;
+ }
+
+out:
+ of_node_put(np);
+ return ret;
+}
+
+/**
+ * cpm_muram_alloc - allocate the requested size worth of multi-user ram
+ * @size: number of bytes to allocate
+ * @align: requested alignment, in bytes
+ *
+ * This function returns an offset into the muram area.
+ * Use cpm_dpram_addr() to get the virtual address of the area.
+ * Use cpm_muram_free() to free the allocation.
+ */
+unsigned long cpm_muram_alloc(unsigned long size, unsigned long align)
+{
+ unsigned long start;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cpm_muram_lock, flags);
+ cpm_muram_info.alignment = align;
+ start = rh_alloc(&cpm_muram_info, size, "commproc");
+ spin_unlock_irqrestore(&cpm_muram_lock, flags);
+
+ return start;
+}
+EXPORT_SYMBOL(cpm_muram_alloc);
+
+/**
+ * cpm_muram_free - free a chunk of multi-user ram
+ * @offset: The beginning of the chunk as returned by cpm_muram_alloc().
+ */
+int cpm_muram_free(unsigned long offset)
+{
+ int ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cpm_muram_lock, flags);
+ ret = rh_free(&cpm_muram_info, offset);
+ spin_unlock_irqrestore(&cpm_muram_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(cpm_muram_free);
+
+/**
+ * cpm_muram_alloc_fixed - reserve a specific region of multi-user ram
+ * @offset: the offset into the muram area to reserve
+ * @size: the number of bytes to reserve
+ *
+ * This function returns "start" on success, -ENOMEM on failure.
+ * Use cpm_dpram_addr() to get the virtual address of the area.
+ * Use cpm_muram_free() to free the allocation.
+ */
+unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size)
+{
+ unsigned long start;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cpm_muram_lock, flags);
+ cpm_muram_info.alignment = 1;
+ start = rh_alloc_fixed(&cpm_muram_info, offset, size, "commproc");
+ spin_unlock_irqrestore(&cpm_muram_lock, flags);
+
+ return start;
+}
+EXPORT_SYMBOL(cpm_muram_alloc_fixed);
+
+/**
+ * cpm_muram_addr - turn a muram offset into a virtual address
+ * @offset: muram offset to convert
+ */
+void __iomem *cpm_muram_addr(unsigned long offset)
+{
+ return muram_vbase + offset;
+}
+EXPORT_SYMBOL(cpm_muram_addr);
+
+/**
+ * cpm_muram_phys - turn a muram virtual address into a DMA address
+ * @offset: virtual address from cpm_muram_addr() to convert
+ */
+dma_addr_t cpm_muram_dma(void __iomem *addr)
+{
+ return muram_pbase + ((u8 __iomem *)addr - muram_vbase);
+}
+EXPORT_SYMBOL(cpm_muram_dma);
+
+#endif /* CONFIG_PPC_CPM_NEW_BINDING */
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index 5bd4508ce3c1..882dbc17d590 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -235,7 +235,7 @@ void scc4_lineif(struct uart_cpm_port *pinfo)
int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
{
int dpmemsz, memsz;
- u8 *dp_mem;
+ u8 __iomem *dp_mem;
unsigned long dp_offset;
u8 *mem_addr;
dma_addr_t dma_addr = 0;
@@ -278,7 +278,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos
* pinfo->rx_fifosize);
- pinfo->rx_bd_base = (cbd_t __iomem __force *)dp_mem;
+ pinfo->rx_bd_base = (cbd_t __iomem *)dp_mem;
pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos;
return 0;
diff --git a/include/asm-powerpc/commproc.h b/include/asm-powerpc/commproc.h
index 5dec32404fa2..0307c84a5c1d 100644
--- a/include/asm-powerpc/commproc.h
+++ b/include/asm-powerpc/commproc.h
@@ -19,6 +19,7 @@
#include <asm/8xx_immap.h>
#include <asm/ptrace.h>
+#include <asm/cpm.h>
/* CPM Command register.
*/
@@ -54,6 +55,7 @@
#define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4))
+#ifndef CONFIG_PPC_CPM_NEW_BINDING
/* The dual ported RAM is multi-functional. Some areas can be (and are
* being) used for microcode. There is an area that can only be used
* as data ram for buffer descriptors, which is all we use right now.
@@ -62,17 +64,27 @@
#define CPM_DATAONLY_BASE ((uint)0x0800)
#define CPM_DATAONLY_SIZE ((uint)0x0700)
#define CPM_DP_NOSPACE ((uint)0x7fffffff)
+#endif
/* Export the base address of the communication processor registers
* and dual port ram.
*/
extern cpm8xx_t __iomem *cpmp; /* Pointer to comm processor */
+
+#ifdef CONFIG_PPC_CPM_NEW_BINDING
+#define cpm_dpalloc cpm_muram_alloc
+#define cpm_dpfree cpm_muram_free
+#define cpm_dpram_addr cpm_muram_addr
+#define cpm_dpram_phys cpm_muram_dma
+#else
extern unsigned long cpm_dpalloc(uint size, uint align);
extern int cpm_dpfree(unsigned long offset);
extern unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align);
extern void cpm_dpdump(void);
extern void *cpm_dpram_addr(unsigned long offset);
extern uint cpm_dpram_phys(u8* addr);
+#endif
+
extern void cpm_setbrg(uint brg, uint rate);
extern uint m8xx_cpm_hostalloc(uint size);
diff --git a/include/asm-powerpc/cpm.h b/include/asm-powerpc/cpm.h
new file mode 100644
index 000000000000..48df9f330e76
--- /dev/null
+++ b/include/asm-powerpc/cpm.h
@@ -0,0 +1,14 @@
+#ifndef __CPM_H
+#define __CPM_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+int cpm_muram_init(void);
+unsigned long cpm_muram_alloc(unsigned long size, unsigned long align);
+int cpm_muram_free(unsigned long offset);
+unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size);
+void __iomem *cpm_muram_addr(unsigned long offset);
+dma_addr_t cpm_muram_dma(void __iomem *addr);
+
+#endif
diff --git a/include/asm-powerpc/cpm2.h b/include/asm-powerpc/cpm2.h
index d7b57ac55892..e698b1d09dcf 100644
--- a/include/asm-powerpc/cpm2.h
+++ b/include/asm-powerpc/cpm2.h
@@ -11,6 +11,7 @@
#define __CPM2__
#include <asm/immap_cpm2.h>
+#include <asm/cpm.h>
/* CPM Command register.
*/
@@ -82,6 +83,7 @@
#define mk_cr_cmd(PG, SBC, MCN, OP) \
((PG << 26) | (SBC << 21) | (MCN << 6) | OP)
+#ifndef CONFIG_PPC_CPM_NEW_BINDING
/* Dual Port RAM addresses. The first 16K is available for almost
* any CPM use, so we put the BDs there. The first 128 bytes are
* used for SMC1 and SMC2 parameter RAM, so we start allocating
@@ -97,6 +99,7 @@
#define CPM_DATAONLY_SIZE ((uint)(16 * 1024) - CPM_DATAONLY_BASE)
#define CPM_FCC_SPECIAL_BASE ((uint)0x0000b000)
#endif
+#endif
/* The number of pages of host memory we allocate for CPM. This is
* done early in kernel initialization to get physically contiguous
@@ -109,11 +112,18 @@
*/
extern cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor */
+#ifdef CONFIG_PPC_CPM_NEW_BINDING
+#define cpm_dpalloc cpm_muram_alloc
+#define cpm_dpfree cpm_muram_free
+#define cpm_dpram_addr cpm_muram_addr
+#else
extern unsigned long cpm_dpalloc(uint size, uint align);
extern int cpm_dpfree(unsigned long offset);
extern unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align);
extern void cpm_dpdump(void);
extern void *cpm_dpram_addr(unsigned long offset);
+#endif
+
extern void cpm_setbrg(uint brg, uint rate);
extern void cpm2_fastbrg(uint brg, uint rate, int div16);
extern void cpm2_reset(void);
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 21:11:48 +0000