diff options
-rw-r--r-- | arch/i386/kernel/cpu/cpufreq/Kconfig | 9 | ||||
-rw-r--r-- | arch/i386/kernel/cpu/cpufreq/Makefile | 1 | ||||
-rw-r--r-- | arch/i386/kernel/cpu/cpufreq/e_powersaver.c | 334 |
3 files changed, 344 insertions, 0 deletions
diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig index 5299c5bf4454..6c52182ca323 100644 --- a/arch/i386/kernel/cpu/cpufreq/Kconfig +++ b/arch/i386/kernel/cpu/cpufreq/Kconfig @@ -217,6 +217,15 @@ config X86_LONGHAUL If in doubt, say N. +config X86_E_POWERSAVER + tristate "VIA C7 Enhanced PowerSaver (EXPERIMENTAL)" + select CPU_FREQ_TABLE + depends on EXPERIMENTAL + help + This adds the CPUFreq driver for VIA C7 processors. + + If in doubt, say N. + comment "shared options" config X86_ACPI_CPUFREQ_PROC_INTF diff --git a/arch/i386/kernel/cpu/cpufreq/Makefile b/arch/i386/kernel/cpu/cpufreq/Makefile index 8de3abe322a9..560f7760dae5 100644 --- a/arch/i386/kernel/cpu/cpufreq/Makefile +++ b/arch/i386/kernel/cpu/cpufreq/Makefile @@ -2,6 +2,7 @@ obj-$(CONFIG_X86_POWERNOW_K6) += powernow-k6.o obj-$(CONFIG_X86_POWERNOW_K7) += powernow-k7.o obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o obj-$(CONFIG_X86_LONGHAUL) += longhaul.o +obj-$(CONFIG_X86_E_POWERSAVER) += e_powersaver.o obj-$(CONFIG_ELAN_CPUFREQ) += elanfreq.o obj-$(CONFIG_SC520_CPUFREQ) += sc520_freq.o obj-$(CONFIG_X86_LONGRUN) += longrun.o diff --git a/arch/i386/kernel/cpu/cpufreq/e_powersaver.c b/arch/i386/kernel/cpu/cpufreq/e_powersaver.c new file mode 100644 index 000000000000..3243725f80ca --- /dev/null +++ b/arch/i386/kernel/cpu/cpufreq/e_powersaver.c @@ -0,0 +1,334 @@ +/* + * Based on documentation provided by Dave Jones. Thanks! + * + * Licensed under the terms of the GNU GPL License version 2. + * + * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/ioport.h> +#include <linux/slab.h> + +#include <asm/msr.h> +#include <asm/tsc.h> +#include <asm/timex.h> +#include <asm/io.h> +#include <asm/delay.h> + +#define EPS_BRAND_C7M 0 +#define EPS_BRAND_C7 1 +#define EPS_BRAND_EDEN 2 +#define EPS_BRAND_C3 3 + +struct eps_cpu_data { + u32 fsb; + struct cpufreq_frequency_table freq_table[]; +}; + +static struct eps_cpu_data *eps_cpu[NR_CPUS]; + + +static unsigned int eps_get(unsigned int cpu) +{ + struct eps_cpu_data *centaur; + u32 lo, hi; + + if (cpu) + return 0; + centaur = eps_cpu[cpu]; + if (centaur == NULL) + return 0; + + /* Return current frequency */ + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + return centaur->fsb * ((lo >> 8) & 0xff); +} + +static int eps_set_state(struct eps_cpu_data *centaur, + unsigned int cpu, + u32 dest_state) +{ + struct cpufreq_freqs freqs; + u32 lo, hi; + int err = 0; + int i; + + freqs.old = eps_get(cpu); + freqs.new = centaur->fsb * ((dest_state >> 8) & 0xff); + freqs.cpu = cpu; + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + /* Wait while CPU is busy */ + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + i = 0; + while (lo & ((1 << 16) | (1 << 17))) { + udelay(16); + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + i++; + if (unlikely(i > 64)) { + err = -ENODEV; + goto postchange; + } + } + /* Set new multiplier and voltage */ + wrmsr(MSR_IA32_PERF_CTL, dest_state & 0xffff, 0); + /* Wait until transition end */ + i = 0; + do { + udelay(16); + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + i++; + if (unlikely(i > 64)) { + err = -ENODEV; + goto postchange; + } + } while (lo & ((1 << 16) | (1 << 17))); + + /* Return current frequency */ +postchange: + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + freqs.new = centaur->fsb * ((lo >> 8) & 0xff); + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + return err; +} + +static int eps_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + struct eps_cpu_data *centaur; + unsigned int newstate = 0; + unsigned int cpu = policy->cpu; + unsigned int dest_state; + int ret; + + if (unlikely(eps_cpu[cpu] == NULL)) + return -ENODEV; + centaur = eps_cpu[cpu]; + + if (unlikely(cpufreq_frequency_table_target(policy, + &eps_cpu[cpu]->freq_table[0], + target_freq, + relation, + &newstate))) { + return -EINVAL; + } + + /* Make frequency transition */ + dest_state = centaur->freq_table[newstate].index & 0xffff; + ret = eps_set_state(centaur, cpu, dest_state); + if (ret) + printk(KERN_ERR "eps: Timeout!\n"); + return ret; +} + +static int eps_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, + &eps_cpu[policy->cpu]->freq_table[0]); +} + +static int eps_cpu_init(struct cpufreq_policy *policy) +{ + unsigned int i; + u32 lo, hi; + u64 val; + u8 current_multiplier, current_voltage; + u8 max_multiplier, max_voltage; + u8 min_multiplier, min_voltage; + u8 brand; + u32 fsb; + struct eps_cpu_data *centaur; + struct cpufreq_frequency_table *f_table; + int k, step, voltage; + int ret; + int states; + + if (policy->cpu != 0) + return -ENODEV; + + /* Check brand */ + printk("eps: Detected VIA "); + rdmsr(0x1153, lo, hi); + brand = (((lo >> 2) ^ lo) >> 18) & 3; + switch(brand) { + case EPS_BRAND_C7M: + printk("C7-M\n"); + break; + case EPS_BRAND_C7: + printk("C7\n"); + break; + case EPS_BRAND_EDEN: + printk("Eden\n"); + break; + case EPS_BRAND_C3: + printk("C3\n"); + return -ENODEV; + break; + } + /* Enable Enhanced PowerSaver */ + rdmsrl(MSR_IA32_MISC_ENABLE, val); + if (!(val & 1 << 16)) { + val |= 1 << 16; + wrmsrl(MSR_IA32_MISC_ENABLE, val); + /* Can be locked at 0 */ + rdmsrl(MSR_IA32_MISC_ENABLE, val); + if (!(val & 1 << 16)) { + printk("eps: Can't enable Enhanced PowerSaver\n"); + return -ENODEV; + } + } + + /* Print voltage and multiplier */ + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + current_voltage = lo & 0xff; + printk("eps: Current voltage = %dmV\n", current_voltage * 16 + 700); + current_multiplier = (lo >> 8) & 0xff; + printk("eps: Current multiplier = %d\n", current_multiplier); + + /* Print limits */ + max_voltage = hi & 0xff; + printk("eps: Highest voltage = %dmV\n", max_voltage * 16 + 700); + max_multiplier = (hi >> 8) & 0xff; + printk("eps: Highest multiplier = %d\n", max_multiplier); + min_voltage = (hi >> 16) & 0xff; + printk("eps: Lowest voltage = %dmV\n", min_voltage * 16 + 700); + min_multiplier = (hi >> 24) & 0xff; + printk("eps: Lowest multiplier = %d\n", min_multiplier); + + /* Sanity checks */ + if (current_multiplier == 0 || max_multiplier == 0 + || min_multiplier == 0) + return -EINVAL; + if (current_multiplier > max_multiplier + || max_multiplier <= min_multiplier) + return -EINVAL; + if (current_voltage > 0x1c || max_voltage > 0x1c) + return -EINVAL; + if (max_voltage < min_voltage) + return -EINVAL; + + /* Calc FSB speed */ + fsb = cpu_khz / current_multiplier; + /* Calc number of p-states supported */ + if (brand == EPS_BRAND_C7M) + states = max_multiplier - min_multiplier + 1; + else + states = 2; + + /* Allocate private data and frequency table for current cpu */ + centaur = kzalloc(sizeof(struct eps_cpu_data) + + (states + 1) * sizeof(struct cpufreq_frequency_table), + GFP_KERNEL); + if (!centaur) + return -ENOMEM; + eps_cpu[0] = centaur; + + /* Copy basic values */ + centaur->fsb = fsb; + + /* Fill frequency and MSR value table */ + f_table = ¢aur->freq_table[0]; + if (brand == EPS_BRAND_EDEN) { + f_table[0].frequency = fsb * min_multiplier; + f_table[0].index = (min_multiplier << 8) | min_voltage; + f_table[1].frequency = fsb * max_multiplier; + f_table[1].index = (max_multiplier << 8) | max_voltage; + f_table[2].frequency = CPUFREQ_TABLE_END; + } else { + k = 0; + step = ((max_voltage - min_voltage) * 256) + / (max_multiplier - min_multiplier); + for (i = min_multiplier; i <= max_multiplier; i++) { + voltage = (k * step) / 256 + min_voltage; + f_table[k].frequency = fsb * i; + f_table[k].index = (i << 8) | voltage; + k++; + } + f_table[k].frequency = CPUFREQ_TABLE_END; + } + + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->cpuinfo.transition_latency = 140000; /* 844mV -> 700mV in ns */ + policy->cur = fsb * current_multiplier; + + ret = cpufreq_frequency_table_cpuinfo(policy, ¢aur->freq_table[0]); + if (ret) { + kfree(centaur); + return ret; + } + + cpufreq_frequency_table_get_attr(¢aur->freq_table[0], policy->cpu); + return 0; +} + +static int eps_cpu_exit(struct cpufreq_policy *policy) +{ + unsigned int cpu = policy->cpu; + struct eps_cpu_data *centaur; + u32 lo, hi; + + if (eps_cpu[cpu] == NULL) + return -ENODEV; + centaur = eps_cpu[cpu]; + + /* Get max frequency */ + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + /* Set max frequency */ + eps_set_state(centaur, cpu, hi & 0xffff); + /* Bye */ + cpufreq_frequency_table_put_attr(policy->cpu); + kfree(eps_cpu[cpu]); + eps_cpu[cpu] = NULL; + return 0; +} + +static struct freq_attr* eps_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver eps_driver = { + .verify = eps_verify, + .target = eps_target, + .init = eps_cpu_init, + .exit = eps_cpu_exit, + .get = eps_get, + .name = "e_powersaver", + .owner = THIS_MODULE, + .attr = eps_attr, +}; + +static int __init eps_init(void) +{ + struct cpuinfo_x86 *c = cpu_data; + + /* This driver will work only on Centaur C7 processors with + * Enhanced SpeedStep/PowerSaver registers */ + if (c->x86_vendor != X86_VENDOR_CENTAUR + || c->x86 != 6 || c->x86_model != 10) + return -ENODEV; + if (!cpu_has(c, X86_FEATURE_EST)) + return -ENODEV; + + if (cpufreq_register_driver(&eps_driver)) + return -EINVAL; + return 0; +} + +static void __exit eps_exit(void) +{ + cpufreq_unregister_driver(&eps_driver); +} + +MODULE_AUTHOR("Rafał Bilski <rafalbilski@interia.pl>"); +MODULE_DESCRIPTION("Enhanced PowerSaver driver for VIA C7 CPU's."); +MODULE_LICENSE("GPL"); + +module_init(eps_init); +module_exit(eps_exit); |