diff options
-rw-r--r-- | drivers/input/touchscreen/Kconfig | 8 | ||||
-rw-r--r-- | drivers/input/touchscreen/Makefile | 1 | ||||
-rw-r--r-- | drivers/input/touchscreen/w90p910_ts.c | 350 |
3 files changed, 359 insertions, 0 deletions
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 1b4a1675cbc8..72e2712c7e2a 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -490,4 +490,12 @@ config TOUCHSCREEN_TSC2007 To compile this driver as a module, choose M here: the module will be called tsc2007. +config TOUCHSCREEN_W90X900 + tristate "W90P910 touchscreen driver" + help + Say Y here if you have a W90P910 based touchscreen. + + To compile this driver as a module, choose M here: the + module will be called w90p910_ts. + endif diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 10e0be6cea43..3e1c5e0b952f 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -39,3 +39,4 @@ wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9713) += wm9713.o obj-$(CONFIG_TOUCHSCREEN_WM97XX_ATMEL) += atmel-wm97xx.o obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE) += zylonite-wm97xx.o +obj-$(CONFIG_TOUCHSCREEN_W90X900) += w90p910_ts.o diff --git a/drivers/input/touchscreen/w90p910_ts.c b/drivers/input/touchscreen/w90p910_ts.c new file mode 100644 index 000000000000..6071f5882572 --- /dev/null +++ b/drivers/input/touchscreen/w90p910_ts.c @@ -0,0 +1,350 @@ +/* + * Copyright (c) 2008 Nuvoton technology corporation. + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation;version 2 of the License. + * + */ + +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/input.h> +#include <linux/interrupt.h> + +/* ADC controller bit defines */ +#define ADC_DELAY 0xf00 +#define ADC_DOWN 0x01 +#define ADC_TSC_Y (0x01 << 8) +#define ADC_TSC_X (0x00 << 8) +#define TSC_FOURWIRE (~(0x03 << 1)) +#define ADC_CLK_EN (0x01 << 28) /* ADC clock enable */ +#define ADC_READ_CON (0x01 << 12) +#define ADC_CONV (0x01 << 13) +#define ADC_SEMIAUTO (0x01 << 14) +#define ADC_WAITTRIG (0x03 << 14) +#define ADC_RST1 (0x01 << 16) +#define ADC_RST0 (0x00 << 16) +#define ADC_EN (0x01 << 17) +#define ADC_INT (0x01 << 18) +#define WT_INT (0x01 << 20) +#define ADC_INT_EN (0x01 << 21) +#define LVD_INT_EN (0x01 << 22) +#define WT_INT_EN (0x01 << 23) +#define ADC_DIV (0x04 << 1) /* div = 6 */ + +enum ts_state { + TS_WAIT_NEW_PACKET, /* We are waiting next touch report */ + TS_WAIT_X_COORD, /* We are waiting for ADC to report X coord */ + TS_WAIT_Y_COORD, /* We are waiting for ADC to report Y coord */ + TS_IDLE, /* Input device is closed, don't do anything */ +}; + +struct w90p910_ts { + struct input_dev *input; + struct timer_list timer; + int irq_num; + void __iomem *clocken; + void __iomem *ts_reg; + spinlock_t lock; + enum ts_state state; +}; + +static void w90p910_report_event(struct w90p910_ts *w90p910_ts, bool down) +{ + struct input_dev *dev = w90p910_ts->input; + + if (down) { + input_report_abs(dev, ABS_X, + __raw_readl(w90p910_ts->ts_reg + 0x0c)); + input_report_abs(dev, ABS_Y, + __raw_readl(w90p910_ts->ts_reg + 0x10)); + } + + input_report_key(dev, BTN_TOUCH, down); + input_sync(dev); +} + +static void w90p910_prepare_x_reading(struct w90p910_ts *w90p910_ts) +{ + unsigned long ctlreg; + + __raw_writel(ADC_TSC_X, w90p910_ts->ts_reg + 0x04); + ctlreg = __raw_readl(w90p910_ts->ts_reg); + ctlreg &= ~(ADC_WAITTRIG | WT_INT | WT_INT_EN); + ctlreg |= ADC_SEMIAUTO | ADC_INT_EN | ADC_CONV; + __raw_writel(ctlreg, w90p910_ts->ts_reg); + + w90p910_ts->state = TS_WAIT_X_COORD; +} + +static void w90p910_prepare_y_reading(struct w90p910_ts *w90p910_ts) +{ + unsigned long ctlreg; + + __raw_writel(ADC_TSC_Y, w90p910_ts->ts_reg + 0x04); + ctlreg = __raw_readl(w90p910_ts->ts_reg); + ctlreg &= ~(ADC_WAITTRIG | ADC_INT | WT_INT_EN); + ctlreg |= ADC_SEMIAUTO | ADC_INT_EN | ADC_CONV; + __raw_writel(ctlreg, w90p910_ts->ts_reg); + + w90p910_ts->state = TS_WAIT_Y_COORD; +} + +static void w90p910_prepare_next_packet(struct w90p910_ts *w90p910_ts) +{ + unsigned long ctlreg; + + ctlreg = __raw_readl(w90p910_ts->ts_reg); + ctlreg &= ~(ADC_INT | ADC_INT_EN | ADC_SEMIAUTO | ADC_CONV); + ctlreg |= ADC_WAITTRIG | WT_INT_EN; + __raw_writel(ctlreg, w90p910_ts->ts_reg); + + w90p910_ts->state = TS_WAIT_NEW_PACKET; +} + +static irqreturn_t w90p910_ts_interrupt(int irq, void *dev_id) +{ + struct w90p910_ts *w90p910_ts = dev_id; + unsigned long flags; + + spin_lock_irqsave(&w90p910_ts->lock, flags); + + switch (w90p910_ts->state) { + case TS_WAIT_NEW_PACKET: + /* + * The controller only generates interrupts when pen + * is down. + */ + del_timer(&w90p910_ts->timer); + w90p910_prepare_x_reading(w90p910_ts); + break; + + + case TS_WAIT_X_COORD: + w90p910_prepare_y_reading(w90p910_ts); + break; + + case TS_WAIT_Y_COORD: + w90p910_report_event(w90p910_ts, true); + w90p910_prepare_next_packet(w90p910_ts); + mod_timer(&w90p910_ts->timer, jiffies + msecs_to_jiffies(100)); + break; + + case TS_IDLE: + break; + } + + spin_unlock_irqrestore(&w90p910_ts->lock, flags); + + return IRQ_HANDLED; +} + +static void w90p910_check_pen_up(unsigned long data) +{ + struct w90p910_ts *w90p910_ts = (struct w90p910_ts *) data; + unsigned long flags; + + spin_lock_irqsave(&w90p910_ts->lock, flags); + + if (w90p910_ts->state == TS_WAIT_NEW_PACKET && + !(__raw_readl(w90p910_ts->ts_reg + 0x04) & ADC_DOWN)) { + + w90p910_report_event(w90p910_ts, false); + } + + spin_unlock_irqrestore(&w90p910_ts->lock, flags); +} + +static int w90p910_open(struct input_dev *dev) +{ + struct w90p910_ts *w90p910_ts = input_get_drvdata(dev); + unsigned long val; + + /* enable the ADC clock */ + val = __raw_readl(w90p910_ts->clocken); + __raw_writel(val | ADC_CLK_EN, w90p910_ts->clocken); + + __raw_writel(ADC_RST1, w90p910_ts->ts_reg); + msleep(1); + __raw_writel(ADC_RST0, w90p910_ts->ts_reg); + msleep(1); + + /* set delay and screen type */ + val = __raw_readl(w90p910_ts->ts_reg + 0x04); + __raw_writel(val & TSC_FOURWIRE, w90p910_ts->ts_reg + 0x04); + __raw_writel(ADC_DELAY, w90p910_ts->ts_reg + 0x08); + + w90p910_ts->state = TS_WAIT_NEW_PACKET; + wmb(); + + /* set trigger mode */ + val = __raw_readl(w90p910_ts->ts_reg); + val |= ADC_WAITTRIG | ADC_DIV | ADC_EN | WT_INT_EN; + __raw_writel(val, w90p910_ts->ts_reg); + + return 0; +} + +static void w90p910_close(struct input_dev *dev) +{ + struct w90p910_ts *w90p910_ts = input_get_drvdata(dev); + unsigned long val; + + /* disable trigger mode */ + + spin_lock_irq(&w90p910_ts->lock); + + w90p910_ts->state = TS_IDLE; + + val = __raw_readl(w90p910_ts->ts_reg); + val &= ~(ADC_WAITTRIG | ADC_DIV | ADC_EN | WT_INT_EN | ADC_INT_EN); + __raw_writel(val, w90p910_ts->ts_reg); + + spin_unlock_irq(&w90p910_ts->lock); + + /* Now that interrupts are shut off we can safely delete timer */ + del_timer_sync(&w90p910_ts->timer); + + /* stop the ADC clock */ + val = __raw_readl(w90p910_ts->clocken); + __raw_writel(val & ~ADC_CLK_EN, w90p910_ts->clocken); +} + +static int __devinit w90x900ts_probe(struct platform_device *pdev) +{ + struct w90p910_ts *w90p910_ts; + struct input_dev *input_dev; + struct resource *res; + int err; + + w90p910_ts = kzalloc(sizeof(struct w90p910_ts), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!w90p910_ts || !input_dev) { + err = -ENOMEM; + goto fail1; + } + + w90p910_ts->input = input_dev; + w90p910_ts->state = TS_IDLE; + spin_lock_init(&w90p910_ts->lock); + setup_timer(&w90p910_ts->timer, w90p910_check_pen_up, + (unsigned long)&w90p910_ts); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + err = -ENXIO; + goto fail1; + } + + if (!request_mem_region(res->start, res->end - res->start + 1, + pdev->name)) { + err = -EBUSY; + goto fail1; + } + + w90p910_ts->ts_reg = ioremap(res->start, res->end - res->start + 1); + if (!w90p910_ts->ts_reg) { + err = -ENOMEM; + goto fail2; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res) { + err = -ENXIO; + goto fail3; + } + + w90p910_ts->clocken = (void __iomem *)res->start; + + input_dev->name = "W90P910 TouchScreen"; + input_dev->phys = "w90p910ts/event0"; + input_dev->id.bustype = BUS_HOST; + input_dev->id.vendor = 0x0005; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + input_dev->dev.parent = &pdev->dev; + input_dev->open = w90p910_open; + input_dev->close = w90p910_close; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + input_set_abs_params(input_dev, ABS_X, 0, 0x400, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, 0x400, 0, 0); + + input_set_drvdata(input_dev, w90p910_ts); + + w90p910_ts->irq_num = platform_get_irq(pdev, 0); + if (request_irq(w90p910_ts->irq_num, w90p910_ts_interrupt, + IRQF_DISABLED, "w90p910ts", w90p910_ts)) { + err = -EBUSY; + goto fail3; + } + + err = input_register_device(w90p910_ts->input); + if (err) + goto fail4; + + platform_set_drvdata(pdev, w90p910_ts); + + return 0; + +fail4: free_irq(w90p910_ts->irq_num, w90p910_ts); +fail3: iounmap(w90p910_ts->ts_reg); +fail2: release_mem_region(res->start, res->end - res->start + 1); +fail1: input_free_device(input_dev); + kfree(w90p910_ts); + return err; +} + +static int __devexit w90x900ts_remove(struct platform_device *pdev) +{ + struct w90p910_ts *w90p910_ts = platform_get_drvdata(pdev); + struct resource *res; + + free_irq(w90p910_ts->irq_num, w90p910_ts); + del_timer_sync(&w90p910_ts->timer); + iounmap(w90p910_ts->ts_reg); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, res->end - res->start + 1); + + input_unregister_device(w90p910_ts->input); + kfree(w90p910_ts); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver w90x900ts_driver = { + .probe = w90x900ts_probe, + .remove = __devexit_p(w90x900ts_remove), + .driver = { + .name = "w90x900-ts", + .owner = THIS_MODULE, + }, +}; + +static int __init w90x900ts_init(void) +{ + return platform_driver_register(&w90x900ts_driver); +} + +static void __exit w90x900ts_exit(void) +{ + platform_driver_unregister(&w90x900ts_driver); +} + +module_init(w90x900ts_init); +module_exit(w90x900ts_exit); + +MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>"); +MODULE_DESCRIPTION("w90p910 touch screen driver!"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:w90p910-ts"); |