summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/laptops/thinkpad-acpi.txt114
-rw-r--r--drivers/platform/x86/thinkpad_acpi.c1178
2 files changed, 963 insertions, 329 deletions
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index aafcaa634191..169091f75e6d 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -1,7 +1,7 @@
ThinkPad ACPI Extras Driver
- Version 0.23
- April 10th, 2009
+ Version 0.24
+ December 11th, 2009
Borislav Deianov <borislav@users.sf.net>
Henrique de Moraes Holschuh <hmh@hmh.eng.br>
@@ -460,6 +460,8 @@ event code Key Notes
For Lenovo ThinkPads with a new
BIOS, it has to be handled either
by the ACPI OSI, or by userspace.
+ The driver does the right thing,
+ never mess with this.
0x1011 0x10 FN+END Brightness down. See brightness
up for details.
@@ -582,46 +584,15 @@ with hotkey_report_mode.
Brightness hotkey notes:
-These are the current sane choices for brightness key mapping in
-thinkpad-acpi:
+Don't mess with the brightness hotkeys in a Thinkpad. If you want
+notifications for OSD, use the sysfs backlight class event support.
-For IBM and Lenovo models *without* ACPI backlight control (the ones on
-which thinkpad-acpi will autoload its backlight interface by default,
-and on which ACPI video does not export a backlight interface):
-
-1. Don't enable or map the brightness hotkeys in thinkpad-acpi, as
- these older firmware versions unfortunately won't respect the hotkey
- mask for brightness keys anyway, and always reacts to them. This
- usually work fine, unless X.org drivers are doing something to block
- the BIOS. In that case, use (3) below. This is the default mode of
- operation.
-
-2. Enable the hotkeys, but map them to something else that is NOT
- KEY_BRIGHTNESS_UP/DOWN or any other keycode that would cause
- userspace to try to change the backlight level, and use that as an
- on-screen-display hint.
-
-3. IF AND ONLY IF X.org drivers find a way to block the firmware from
- automatically changing the brightness, enable the hotkeys and map
- them to KEY_BRIGHTNESS_UP and KEY_BRIGHTNESS_DOWN, and feed that to
- something that calls xbacklight. thinkpad-acpi will not be able to
- change brightness in that case either, so you should disable its
- backlight interface.
-
-For Lenovo models *with* ACPI backlight control:
-
-1. Load up ACPI video and use that. ACPI video will report ACPI
- events for brightness change keys. Do not mess with thinkpad-acpi
- defaults in this case. thinkpad-acpi should not have anything to do
- with backlight events in a scenario where ACPI video is loaded:
- brightness hotkeys must be disabled, and the backlight interface is
- to be kept disabled as well. This is the default mode of operation.
-
-2. Do *NOT* load up ACPI video, enable the hotkeys in thinkpad-acpi,
- and map them to KEY_BRIGHTNESS_UP and KEY_BRIGHTNESS_DOWN. Process
- these keys on userspace somehow (e.g. by calling xbacklight).
- The driver will do this automatically if it detects that ACPI video
- has been disabled.
+The driver will issue KEY_BRIGHTNESS_UP and KEY_BRIGHTNESS_DOWN events
+automatically for the cases were userspace has to do something to
+implement brightness changes. When you override these events, you will
+either fail to handle properly the ThinkPads that require explicit
+action to change backlight brightness, or the ThinkPads that require
+that no action be taken to work properly.
Bluetooth
@@ -1121,25 +1092,61 @@ WARNING:
its level up and down at every change.
-Volume control -- /proc/acpi/ibm/volume
----------------------------------------
+Volume control
+--------------
+
+procfs: /proc/acpi/ibm/volume
+ALSA: "ThinkPad Console Audio Control", default ID: "ThinkPadEC"
+
+NOTE: by default, the volume control interface operates in read-only
+mode, as it is supposed to be used for on-screen-display purposes.
+The read/write mode can be enabled through the use of the
+"volume_control=1" module parameter.
-This feature allows volume control on ThinkPad models which don't have
-a hardware volume knob. The available commands are:
+NOTE: distros are urged to not enable volume_control by default, this
+should be done by the local admin only. The ThinkPad UI is for the
+console audio control to be done through the volume keys only, and for
+the desktop environment to just provide on-screen-display feedback.
+Software volume control should be done only in the main AC97/HDA
+mixer.
+
+This feature allows volume control on ThinkPad models with a digital
+volume knob (when available, not all models have it), as well as
+mute/unmute control. The available commands are:
echo up >/proc/acpi/ibm/volume
echo down >/proc/acpi/ibm/volume
echo mute >/proc/acpi/ibm/volume
+ echo unmute >/proc/acpi/ibm/volume
echo 'level <level>' >/proc/acpi/ibm/volume
-The <level> number range is 0 to 15 although not all of them may be
+The <level> number range is 0 to 14 although not all of them may be
distinct. The unmute the volume after the mute command, use either the
-up or down command (the level command will not unmute the volume).
+up or down command (the level command will not unmute the volume), or
+the unmute command.
+
The current volume level and mute state is shown in the file.
-The ALSA mixer interface to this feature is still missing, but patches
-to add it exist. That problem should be addressed in the not so
-distant future.
+You can use the volume_capabilities parameter to tell the driver
+whether your thinkpad has volume control or mute-only control:
+volume_capabilities=1 for mixers with mute and volume control,
+volume_capabilities=2 for mixers with only mute control.
+
+If the driver misdetects the capabilities for your ThinkPad model,
+please report this to ibm-acpi-devel@lists.sourceforge.net, so that we
+can update the driver.
+
+There are two strategies for volume control. To select which one
+should be used, use the volume_mode module parameter: volume_mode=1
+selects EC mode, and volume_mode=3 selects EC mode with NVRAM backing
+(so that volume/mute changes are remembered across shutdown/reboot).
+
+The driver will operate in volume_mode=3 by default. If that does not
+work well on your ThinkPad model, please report this to
+ibm-acpi-devel@lists.sourceforge.net.
+
+The driver supports the standard ALSA module parameters. If the ALSA
+mixer is disabled, the driver will disable all volume functionality.
Fan control and monitoring: fan speed, fan enable/disable
@@ -1405,6 +1412,7 @@ to enable more than one output class, just add their values.
0x0008 HKEY event interface, hotkeys
0x0010 Fan control
0x0020 Backlight brightness
+ 0x0040 Audio mixer/volume control
There is also a kernel build option to enable more debugging
information, which may be necessary to debug driver problems.
@@ -1465,3 +1473,9 @@ Sysfs interface changelog:
and it is always able to disable hot keys. Very old
thinkpads are properly supported. hotkey_bios_mask
is deprecated and marked for removal.
+
+0x020600: Marker for backlight change event support.
+
+0x020700: Support for mute-only mixers.
+ Volume control in read-only mode by default.
+ Marker for ALSA mixer support.
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index cf61d6a8ef6f..448c8aeb166b 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -21,8 +21,8 @@
* 02110-1301, USA.
*/
-#define TPACPI_VERSION "0.23"
-#define TPACPI_SYSFS_VERSION 0x020500
+#define TPACPI_VERSION "0.24"
+#define TPACPI_SYSFS_VERSION 0x020700
/*
* Changelog:
@@ -61,6 +61,7 @@
#include <linux/nvram.h>
#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include <linux/sysfs.h>
#include <linux/backlight.h>
#include <linux/fb.h>
@@ -76,6 +77,10 @@
#include <linux/jiffies.h>
#include <linux/workqueue.h>
+#include <sound/core.h>
+#include <sound/control.h>
+#include <sound/initval.h>
+
#include <acpi/acpi_drivers.h>
#include <linux/pci_ids.h>
@@ -231,6 +236,7 @@ enum tpacpi_hkey_event_t {
#define TPACPI_DBG_HKEY 0x0008
#define TPACPI_DBG_FAN 0x0010
#define TPACPI_DBG_BRGHT 0x0020
+#define TPACPI_DBG_MIXER 0x0040
#define onoff(status, bit) ((status) & (1 << (bit)) ? "on" : "off")
#define enabled(status, bit) ((status) & (1 << (bit)) ? "enabled" : "disabled")
@@ -256,7 +262,7 @@ struct tp_acpi_drv_struct {
struct ibm_struct {
char *name;
- int (*read) (char *);
+ int (*read) (struct seq_file *);
int (*write) (char *);
void (*exit) (void);
void (*resume) (void);
@@ -298,6 +304,7 @@ static struct {
u32 fan_ctrl_status_undef:1;
u32 second_fan:1;
u32 beep_needs_two_args:1;
+ u32 mixer_no_level_control:1;
u32 input_device_registered:1;
u32 platform_drv_registered:1;
u32 platform_drv_attrs_registered:1;
@@ -309,6 +316,7 @@ static struct {
static struct {
u16 hotkey_mask_ff:1;
+ u16 volume_ctrl_forbidden:1;
} tp_warned;
struct thinkpad_id_data {
@@ -425,6 +433,12 @@ static void tpacpi_log_usertask(const char * const what)
.ec = TPACPI_MATCH_ANY, \
.quirks = (__quirk) }
+#define TPACPI_QEC_LNV(__id1, __id2, __quirk) \
+ { .vendor = PCI_VENDOR_ID_LENOVO, \
+ .bios = TPACPI_MATCH_ANY, \
+ .ec = TPID(__id1, __id2), \
+ .quirks = (__quirk) }
+
struct tpacpi_quirk {
unsigned int vendor;
u16 bios;
@@ -776,36 +790,25 @@ static int __init register_tpacpi_subdriver(struct ibm_struct *ibm)
****************************************************************************
****************************************************************************/
-static int dispatch_procfs_read(char *page, char **start, off_t off,
- int count, int *eof, void *data)
+static int dispatch_proc_show(struct seq_file *m, void *v)
{
- struct ibm_struct *ibm = data;
- int len;
+ struct ibm_struct *ibm = m->private;
if (!ibm || !ibm->read)
return -EINVAL;
+ return ibm->read(m);
+}
- len = ibm->read(page);
- if (len < 0)
- return len;
-
- if (len <= off + count)
- *eof = 1;
- *start = page + off;
- len -= off;
- if (len > count)
- len = count;
- if (len < 0)
- len = 0;
-
- return len;
+static int dispatch_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, dispatch_proc_show, PDE(inode)->data);
}
-static int dispatch_procfs_write(struct file *file,
+static ssize_t dispatch_proc_write(struct file *file,
const char __user *userbuf,
- unsigned long count, void *data)
+ size_t count, loff_t *pos)
{
- struct ibm_struct *ibm = data;
+ struct ibm_struct *ibm = PDE(file->f_path.dentry->d_inode)->data;
char *kernbuf;
int ret;
@@ -834,6 +837,15 @@ static int dispatch_procfs_write(struct file *file,
return ret;
}
+static const struct file_operations dispatch_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = dispatch_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .write = dispatch_proc_write,
+};
+
static char *next_cmd(char **cmds)
{
char *start = *cmds;
@@ -1261,6 +1273,7 @@ static int __init tpacpi_new_rfkill(const enum tpacpi_rfk_id id,
struct tpacpi_rfk *atp_rfk;
int res;
bool sw_state = false;
+ bool hw_state;
int sw_status;
BUG_ON(id >= TPACPI_RFK_SW_MAX || tpacpi_rfkill_switches[id]);
@@ -1295,7 +1308,8 @@ static int __init tpacpi_new_rfkill(const enum tpacpi_rfk_id id,
rfkill_init_sw_state(atp_rfk->rfkill, sw_state);
}
}
- rfkill_set_hw_state(atp_rfk->rfkill, tpacpi_rfk_check_hwblock_state());
+ hw_state = tpacpi_rfk_check_hwblock_state();
+ rfkill_set_hw_state(atp_rfk->rfkill, hw_state);
res = rfkill_register(atp_rfk->rfkill);
if (res < 0) {
@@ -1308,6 +1322,9 @@ static int __init tpacpi_new_rfkill(const enum tpacpi_rfk_id id,
}
tpacpi_rfkill_switches[id] = atp_rfk;
+
+ printk(TPACPI_INFO "rfkill switch %s: radio is %sblocked\n",
+ name, (sw_state || hw_state) ? "" : "un");
return 0;
}
@@ -1380,12 +1397,10 @@ static ssize_t tpacpi_rfk_sysfs_enable_store(const enum tpacpi_rfk_id id,
}
/* procfs -------------------------------------------------------------- */
-static int tpacpi_rfk_procfs_read(const enum tpacpi_rfk_id id, char *p)
+static int tpacpi_rfk_procfs_read(const enum tpacpi_rfk_id id, struct seq_file *m)
{
- int len = 0;
-
if (id >= TPACPI_RFK_SW_MAX)
- len += sprintf(p + len, "status:\t\tnot supported\n");
+ seq_printf(m, "status:\t\tnot supported\n");
else {
int status;
@@ -1399,13 +1414,13 @@ static int tpacpi_rfk_procfs_read(const enum tpacpi_rfk_id id, char *p)
return status;
}
- len += sprintf(p + len, "status:\t\t%s\n",
+ seq_printf(m, "status:\t\t%s\n",
(status == TPACPI_RFK_RADIO_ON) ?
"enabled" : "disabled");
- len += sprintf(p + len, "commands:\tenable, disable\n");
+ seq_printf(m, "commands:\tenable, disable\n");
}
- return len;
+ return 0;
}
static int tpacpi_rfk_procfs_write(const enum tpacpi_rfk_id id, char *buf)
@@ -1776,7 +1791,7 @@ static const struct tpacpi_quirk tpacpi_bios_version_qtable[] __initconst = {
TPV_QL1('7', '9', 'E', '3', '5', '0'), /* T60/p */
TPV_QL1('7', 'C', 'D', '2', '2', '2'), /* R60, R60i */
- TPV_QL0('7', 'E', 'D', '0'), /* R60e, R60i */
+ TPV_QL1('7', 'E', 'D', '0', '1', '5'), /* R60e, R60i */
/* BIOS FW BIOS VERS EC FW EC VERS */
TPV_QI2('1', 'W', '9', '0', '1', 'V', '2', '8'), /* R50e (1) */
@@ -1792,8 +1807,8 @@ static const struct tpacpi_quirk tpacpi_bios_version_qtable[] __initconst = {
TPV_QI1('7', '4', '6', '4', '2', '7'), /* X41 (0) */
TPV_QI1('7', '5', '6', '0', '2', '0'), /* X41t (0) */
- TPV_QL0('7', 'B', 'D', '7'), /* X60/s */
- TPV_QL0('7', 'J', '3', '0'), /* X60t */
+ TPV_QL1('7', 'B', 'D', '7', '4', '0'), /* X60/s */
+ TPV_QL1('7', 'J', '3', '0', '1', '3'), /* X60t */
/* (0) - older versions lack DMI EC fw string and functionality */
/* (1) - older versions known to lack functionality */
@@ -1883,14 +1898,11 @@ static int __init thinkpad_acpi_driver_init(struct ibm_init_struct *iibm)
return 0;
}
-static int thinkpad_acpi_driver_read(char *p)
+static int thinkpad_acpi_driver_read(struct seq_file *m)
{
- int len = 0;
-
- len += sprintf(p + len, "driver:\t\t%s\n", TPACPI_DESC);
- len += sprintf(p + len, "version:\t%s\n", TPACPI_VERSION);
-
- return len;
+ seq_printf(m, "driver:\t\t%s\n", TPACPI_DESC);
+ seq_printf(m, "version:\t%s\n", TPACPI_VERSION);
+ return 0;
}
static struct ibm_struct thinkpad_acpi_driver_data = {
@@ -2186,7 +2198,8 @@ static int hotkey_mask_set(u32 mask)
fwmask, hotkey_acpi_mask);
}
- hotkey_mask_warn_incomplete_mask();
+ if (tpacpi_lifecycle != TPACPI_LIFE_EXITING)
+ hotkey_mask_warn_incomplete_mask();
return rc;
}
@@ -3182,6 +3195,8 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
int res, i;
int status;
int hkeyv;
+ bool radiosw_state = false;
+ bool tabletsw_state = false;
unsigned long quirks;
@@ -3287,6 +3302,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
if (dbg_wlswemul) {
tp_features.hotkey_wlsw = 1;
+ radiosw_state = !!tpacpi_wlsw_emulstate;
printk(TPACPI_INFO
"radio switch emulation enabled\n");
} else
@@ -3294,6 +3310,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
/* Not all thinkpads have a hardware radio switch */
if (acpi_evalf(hkey_handle, &status, "WLSW", "qd")) {
tp_features.hotkey_wlsw = 1;
+ radiosw_state = !!status;
printk(TPACPI_INFO
"radio switch found; radios are %s\n",
enabled(status, 0));
@@ -3305,11 +3322,11 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
/* For X41t, X60t, X61t Tablets... */
if (!res && acpi_evalf(hkey_handle, &status, "MHKG", "qd")) {
tp_features.hotkey_tablet = 1;
+ tabletsw_state = !!(status & TP_HOTKEY_TABLET_MASK);
printk(TPACPI_INFO
"possible tablet mode switch found; "
"ThinkPad in %s mode\n",
- (status & TP_HOTKEY_TABLET_MASK)?
- "tablet" : "laptop");
+ (tabletsw_state) ? "tablet" : "laptop");
res = add_to_attr_set(hotkey_dev_attributes,
&dev_attr_hotkey_tablet_mode.attr);
}
@@ -3344,16 +3361,14 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
TPACPI_HOTKEY_MAP_SIZE);
}
- set_bit(EV_KEY, tpacpi_inputdev->evbit);
- set_bit(EV_MSC, tpacpi_inputdev->evbit);
- set_bit(MSC_SCAN, tpacpi_inputdev->mscbit);
+ input_set_capability(tpacpi_inputdev, EV_MSC, MSC_SCAN);
tpacpi_inputdev->keycodesize = TPACPI_HOTKEY_MAP_TYPESIZE;
tpacpi_inputdev->keycodemax = TPACPI_HOTKEY_MAP_LEN;
tpacpi_inputdev->keycode = hotkey_keycode_map;
for (i = 0; i < TPACPI_HOTKEY_MAP_LEN; i++) {
if (hotkey_keycode_map[i] != KEY_RESERVED) {
- set_bit(hotkey_keycode_map[i],
- tpacpi_inputdev->keybit);
+ input_set_capability(tpacpi_inputdev, EV_KEY,
+ hotkey_keycode_map[i]);
} else {
if (i < sizeof(hotkey_reserved_mask)*8)
hotkey_reserved_mask |= 1 << i;
@@ -3361,12 +3376,14 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
}
if (tp_features.hotkey_wlsw) {
- set_bit(EV_SW, tpacpi_inputdev->evbit);
- set_bit(SW_RFKILL_ALL, tpacpi_inputdev->swbit);
+ input_set_capability(tpacpi_inputdev, EV_SW, SW_RFKILL_ALL);
+ input_report_switch(tpacpi_inputdev,
+ SW_RFKILL_ALL, radiosw_state);
}
if (tp_features.hotkey_tablet) {
- set_bit(EV_SW, tpacpi_inputdev->evbit);
- set_bit(SW_TABLET_MODE, tpacpi_inputdev->swbit);
+ input_set_capability(tpacpi_inputdev, EV_SW, SW_TABLET_MODE);
+ input_report_switch(tpacpi_inputdev,
+ SW_TABLET_MODE, tabletsw_state);
}
/* Do not issue duplicate brightness change events to
@@ -3433,8 +3450,6 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
tpacpi_inputdev->close = &hotkey_inputdev_close;
hotkey_poll_setup_safe(true);
- tpacpi_send_radiosw_update();
- tpacpi_input_send_tabletsw();
return 0;
@@ -3542,49 +3557,57 @@ static bool hotkey_notify_usrevent(const u32 hkey,
}
}
+static void thermal_dump_all_sensors(void);
+
static bool hotkey_notify_thermal(const u32 hkey,
bool *send_acpi_ev,
bool *ignore_acpi_ev)
{
+ bool known = true;
+
/* 0x6000-0x6FFF: thermal alarms */
*send_acpi_ev = true;
*ignore_acpi_ev = false;
switch (hkey) {
+ case TP_HKEY_EV_THM_TABLE_CHANGED:
+ printk(TPACPI_INFO
+ "EC reports that Thermal Table has changed\n");
+ /* recommended action: do nothing, we don't have
+ * Lenovo ATM information */
+ return true;
case TP_HKEY_EV_ALARM_BAT_HOT:
printk(TPACPI_CRIT
"THERMAL ALARM: battery is too hot!\n");
/* recommended action: warn user through gui */
- return true;
+ break;
case TP_HKEY_EV_ALARM_BAT_XHOT:
printk(TPACPI_ALERT
"THERMAL EMERGENCY: battery is extremely hot!\n");
/* recommended action: immediate sleep/hibernate */
- return true;
+ break;
case TP_HKEY_EV_ALARM_SENSOR_HOT:
printk(TPACPI_CRIT
"THERMAL ALARM: "
"a sensor reports something is too hot!\n");
/* recommended action: warn user through gui, that */
/* some internal component is too hot */
- return true;
+ break;
case TP_HKEY_EV_ALARM_SENSOR_XHOT:
printk(TPACPI_ALERT
"THERMAL EMERGENCY: "
"a sensor reports something is extremely hot!\n");
/* recommended action: immediate sleep/hibernate */
- return true;
- case TP_HKEY_EV_THM_TABLE_CHANGED:
- printk(TPACPI_INFO
- "EC reports that Thermal Table has changed\n");
- /* recommended action: do nothing, we don't have
- * Lenovo ATM information */
- return true;
+ break;
default:
printk(TPACPI_ALERT
"THERMAL ALERT: unknown thermal alarm received\n");
- return false;
+ known = false;
}
+
+ thermal_dump_all_sensors();
+
+ return known;
}
static void hotkey_notify(struct ibm_struct *ibm, u32 event)
@@ -3727,14 +3750,13 @@ static void hotkey_resume(void)
}
/* procfs -------------------------------------------------------------- */
-static int hotkey_read(char *p)
+static int hotkey_read(struct seq_file *m)
{
int res, status;
- int len = 0;
if (!tp_features.hotkey) {
- len += sprintf(p + len, "status:\t\tnot supported\n");
- return len;
+ seq_printf(m, "status:\t\tnot supported\n");
+ return 0;
}
if (mutex_lock_killable(&hotkey_mutex))
@@ -3746,17 +3768,16 @@ static int hotkey_read(char *p)
if (res)
return res;
- len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 0));
+ seq_printf(m, "status:\t\t%s\n", enabled(status, 0));
if (hotkey_all_mask) {
- len += sprintf(p + len, "mask:\t\t0x%08x\n", hotkey_user_mask);
- len += sprintf(p + len,
- "commands:\tenable, disable, reset, <mask>\n");
+ seq_printf(m, "mask:\t\t0x%08x\n", hotkey_user_mask);
+ seq_printf(m, "commands:\tenable, disable, reset, <mask>\n");
} else {
- len += sprintf(p + len, "mask:\t\tnot supported\n");
- len += sprintf(p + len, "commands:\tenable, disable, reset\n");
+ seq_printf(m, "mask:\t\tnot supported\n");
+ seq_printf(m, "commands:\tenable, disable, reset\n");
}
- return len;
+ return 0;
}
static void hotkey_enabledisable_warn(bool enable)
@@ -3863,15 +3884,6 @@ enum {
#define TPACPI_RFK_BLUETOOTH_SW_NAME "tpacpi_bluetooth_sw"
-static void bluetooth_suspend(pm_message_t state)
-{
- /* Try to make sure radio will resume powered off */
- if (!acpi_evalf(NULL, NULL, "\\BLTH", "vd",
- TP_ACPI_BLTH_PWR_OFF_ON_RESUME))
- vdbg_printk(TPACPI_DBG_RFKILL,
- "bluetooth power down on resume request failed\n");
-}
-
static int bluetooth_get_status(void)
{
int status;
@@ -3905,10 +3917,9 @@ static int bluetooth_set_status(enum tpacpi_rfkill_state state)
#endif
/* We make sure to keep TP_ACPI_BLUETOOTH_RESUMECTRL off */
+ status = TP_ACPI_BLUETOOTH_RESUMECTRL;
if (state == TPACPI_RFK_RADIO_ON)
- status = TP_ACPI_BLUETOOTH_RADIOSSW;
- else
- status = 0;
+ status |= TP_ACPI_BLUETOOTH_RADIOSSW;
if (!acpi_evalf(hkey_handle, NULL, "SBDC", "vd", status))
return -EIO;
@@ -4032,9 +4043,9 @@ static int __init bluetooth_init(struct ibm_init_struct *iibm)
}
/* procfs -------------------------------------------------------------- */
-static int bluetooth_read(char *p)
+static int bluetooth_read(struct seq_file *m)
{
- return tpacpi_rfk_procfs_read(TPACPI_RFK_BLUETOOTH_SW_ID, p);
+ return tpacpi_rfk_procfs_read(TPACPI_RFK_BLUETOOTH_SW_ID, m);
}
static int bluetooth_write(char *buf)
@@ -4047,7 +4058,6 @@ static struct ibm_struct bluetooth_driver_data = {
.read = bluetooth_read,
.write = bluetooth_write,
.exit = bluetooth_exit,
- .suspend = bluetooth_suspend,
.shutdown = bluetooth_shutdown,
};
@@ -4065,15 +4075,6 @@ enum {
#define TPACPI_RFK_WWAN_SW_NAME "tpacpi_wwan_sw"
-static void wan_suspend(pm_message_t state)
-{
- /* Try to make sure radio will resume powered off */
- if (!acpi_evalf(NULL, NULL, "\\WGSV", "qvd",
- TP_ACPI_WGSV_PWR_OFF_ON_RESUME))
- vdbg_printk(TPACPI_DBG_RFKILL,
- "WWAN power down on resume request failed\n");
-}
-
static int wan_get_status(void)
{
int status;
@@ -4106,11 +4107,10 @@ static int wan_set_status(enum tpacpi_rfkill_state state)
}
#endif
- /* We make sure to keep TP_ACPI_WANCARD_RESUMECTRL off */
+ /* We make sure to set TP_ACPI_WANCARD_RESUMECTRL */
+ status = TP_ACPI_WANCARD_RESUMECTRL;
if (state == TPACPI_RFK_RADIO_ON)
- status = TP_ACPI_WANCARD_RADIOSSW;
- else
- status = 0;
+ status |= TP_ACPI_WANCARD_RADIOSSW;
if (!acpi_evalf(hkey_handle, NULL, "SWAN", "vd", status))
return -EIO;
@@ -4233,9 +4233,9 @@ static int __init wan_init(struct ibm_init_struct *iibm)
}
/* procfs -------------------------------------------------------------- */
-static int wan_read(char *p)
+static int wan_read(struct seq_file *m)
{
- return tpacpi_rfk_procfs_read(TPACPI_RFK_WWAN_SW_ID, p);
+ return tpacpi_rfk_procfs_read(TPACPI_RFK_WWAN_SW_ID, m);
}
static int wan_write(char *buf)
@@ -4248,7 +4248,6 @@ static struct ibm_struct wan_driver_data = {
.read = wan_read,
.write = wan_write,
.exit = wan_exit,
- .suspend = wan_suspend,
.shutdown = wan_shutdown,
};
@@ -4611,14 +4610,13 @@ static int video_expand_toggle(void)
/* not reached */
}
-static int video_read(char *p)
+static int video_read(struct seq_file *m)
{
int status, autosw;
- int len = 0;
if (video_supported == TPACPI_VIDEO_NONE) {
- len += sprintf(p + len, "status:\t\tnot supported\n");
- return len;
+ seq_printf(m, "status:\t\tnot supported\n");
+ return 0;
}
status = video_outputsw_get();
@@ -4629,20 +4627,20 @@ static int video_read(char *p)
if (autosw < 0)
return autosw;
- len += sprintf(p + len, "status:\t\tsupported\n");
- len += sprintf(p + len, "lcd:\t\t%s\n", enabled(status, 0));
- len += sprintf(p + len, "crt:\t\t%s\n", enabled(status, 1));
+ seq_printf(m, "status:\t\tsupported\n");
+ seq_printf(m, "lcd:\t\t%s\n", enabled(status, 0));
+ seq_printf(m, "crt:\t\t%s\n", enabled(status, 1));
if (video_supported == TPACPI_VIDEO_NEW)
- len += sprintf(p + len, "dvi:\t\t%s\n", enabled(status, 3));
- len += sprintf(p + len, "auto:\t\t%s\n", enabled(autosw, 0));
- len += sprintf(p + len, "commands:\tlcd_enable, lcd_disable\n");
- len += sprintf(p + len, "commands:\tcrt_enable, crt_disable\n");
+ seq_printf(m, "dvi:\t\t%s\n", enabled(status, 3));
+ seq_printf(m, "auto:\t\t%s\n", enabled(autosw, 0));
+ seq_printf(m, "commands:\tlcd_enable, lcd_disable\n");
+ seq_printf(m, "commands:\tcrt_enable, crt_disable\n");
if (video_supported == TPACPI_VIDEO_NEW)
- len += sprintf(p + len, "commands:\tdvi_enable, dvi_disable\n");
- len += sprintf(p + len, "commands:\tauto_enable, auto_disable\n");
- len += sprintf(p + len, "commands:\tvideo_switch, expand_toggle\n");
+ seq_printf(m, "commands:\tdvi_enable, dvi_disable\n");
+ seq_printf(m, "commands:\tauto_enable, auto_disable\n");
+ seq_printf(m, "commands:\tvideo_switch, expand_toggle\n");
- return len;
+ return 0;
}
static int video_write(char *buf)
@@ -4834,25 +4832,24 @@ static void light_exit(void)
flush_workqueue(tpacpi_wq);
}
-static int light_read(char *p)
+static int light_read(struct seq_file *m)
{
- int len = 0;
int status;
if (!tp_features.light) {
- len += sprintf(p + len, "status:\t\tnot supported\n");
+ seq_printf(m, "status:\t\tnot supported\n");
} else if (!tp_features.light_status) {
- len += sprintf(p + len, "status:\t\tunknown\n");
- len += sprintf(p + len, "commands:\ton, off\n");
+ seq_printf(m, "status:\t\tunknown\n");
+ seq_printf(m, "commands:\ton, off\n");
} else {
status = light_get_status();
if (status < 0)
return status;
- len += sprintf(p + len, "status:\t\t%s\n", onoff(status, 0));
- len += sprintf(p + len, "commands:\ton, off\n");
+ seq_printf(m, "status:\t\t%s\n", onoff(status, 0));
+ seq_printf(m, "commands:\ton, off\n");
}
- return len;
+ return 0;
}
static int light_write(char *buf)
@@ -4930,20 +4927,18 @@ static void cmos_exit(void)
device_remove_file(&tpacpi_pdev->dev, &dev_attr_cmos_command);
}
-static int cmos_read(char *p)
+static int cmos_read(struct seq_file *m)
{
- int len = 0;
-
/* cmos not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
R30, R31, T20-22, X20-21 */
if (!cmos_handle)
- len += sprintf(p + len, "status:\t\tnot supported\n");
+ seq_printf(m, "status:\t\tnot supported\n");
else {
- len += sprintf(p + len, "status:\t\tsupported\n");
- len += sprintf(p + len, "commands:\t<cmd> (<cmd> is 0-21)\n");
+ seq_printf(m, "status:\t\tsupported\n");
+ seq_printf(m, "commands:\t<cmd> (<cmd> is 0-21)\n");
}
- return len;
+ return 0;
}
static int cmos_write(char *buf)
@@ -5318,15 +5313,13 @@ static int __init led_init(struct ibm_init_struct *iibm)
((s) == TPACPI_LED_OFF ? "off" : \
((s) == TPACPI_LED_ON ? "on" : "blinking"))
-static int led_read(char *p)
+static int led_read(struct seq_file *m)
{
- int len = 0;
-
if (!led_supported) {
- len += sprintf(p + len, "status:\t\tnot supported\n");
- return len;
+ seq_printf(m, "status:\t\tnot supported\n");
+ return 0;
}
- len += sprintf(p + len, "status:\t\tsupported\n");
+ seq_printf(m, "status:\t\tsupported\n");
if (led_supported == TPACPI_LED_570) {
/* 570 */
@@ -5335,15 +5328,15 @@ static int led_read(char *p)
status = led_get_status(i);
if (status < 0)
return -EIO;
- len += sprintf(p + len, "%d:\t\t%s\n",
+ seq_printf(m, "%d:\t\t%s\n",
i, str_led_status(status));
}
}
- len += sprintf(p + len, "commands:\t"
+ seq_printf(m, "commands:\t"
"<led> on, <led> off, <led> blink (<led> is 0-15)\n");
- return len;
+ return 0;
}
static int led_write(char *buf)
@@ -5416,18 +5409,16 @@ static int __init beep_init(struct ibm_init_struct *iibm)
return (beep_handle)? 0 : 1;
}
-static int beep_read(char *p)
+static int beep_read(struct seq_file *m)
{
- int len = 0;
-
if (!beep_handle)
- len += sprintf(p + len, "status:\t\tnot supported\n");
+ seq_printf(m, "status:\t\tnot supported\n");
else {
- len += sprintf(p + len, "status:\t\tsupported\n");
- len += sprintf(p + len, "commands:\t<cmd> (<cmd> is 0-17)\n");
+ seq_printf(m, "status:\t\tsupported\n");
+ seq_printf(m, "commands:\t<cmd> (<cmd> is 0-17)\n");
}
- return len;
+ return 0;
}
static int beep_write(char *buf)
@@ -5480,8 +5471,11 @@ enum { /* TPACPI_THERMAL_TPEC_* */
TP_EC_THERMAL_TMP0 = 0x78, /* ACPI EC regs TMP 0..7 */
TP_EC_THERMAL_TMP8 = 0xC0, /* ACPI EC regs TMP 8..15 */
TP_EC_THERMAL_TMP_NA = -128, /* ACPI EC sensor not available */
+
+ TPACPI_THERMAL_SENSOR_NA = -128000, /* Sensor not available */
};
+
#define TPACPI_MAX_THERMAL_SENSORS 16 /* Max thermal sensors supported */
struct ibm_thermal_sensors_struct {
s32 temp[TPACPI_MAX_THERMAL_SENSORS];
@@ -5571,6 +5565,28 @@ static int thermal_get_sensors(struct ibm_thermal_sensors_struct *s)
return n;
}
+static void thermal_dump_all_sensors(void)
+{
+ int n, i;
+ struct ibm_thermal_sensors_struct t;
+
+ n = thermal_get_sensors(&t);
+ if (n <= 0)
+ return;
+
+ printk(TPACPI_NOTICE
+ "temperatures (Celsius):");
+
+ for (i = 0; i < n; i++) {
+ if (t.temp[i] != TPACPI_THERMAL_SENSOR_NA)
+ printk(KERN_CONT " %d", (int)(t.temp[i] / 1000));
+ else
+ printk(KERN_CONT " N/A");
+ }
+
+ printk(KERN_CONT "\n");
+}
+
/* sysfs temp##_input -------------------------------------------------- */
static ssize_t thermal_temp_input_show(struct device *dev,
@@ -5586,7 +5602,7 @@ static ssize_t thermal_temp_input_show(struct device *dev,
res = thermal_get_sensor(idx, &value);
if (res)
return res;
- if (value == TP_EC_THERMAL_TMP_NA * 1000)
+ if (value == TPACPI_THERMAL_SENSOR_NA)
return -ENXIO;
return snprintf(buf, PAGE_SIZE, "%d\n", value);
@@ -5763,9 +5779,8 @@ static void thermal_exit(void)
}
}
-static int thermal_read(char *p)
+static int thermal_read(struct seq_file *m)
{
- int len = 0;
int n, i;
struct ibm_thermal_sensors_struct t;
@@ -5773,16 +5788,16 @@ static int thermal_read(char *p)
if (unlikely(n < 0))
return n;
- len += sprintf(p + len, "temperatures:\t");
+ seq_printf(m, "temperatures:\t");
if (n > 0) {
for (i = 0; i < (n - 1); i++)
- len += sprintf(p + len, "%d ", t.temp[i] / 1000);
- len += sprintf(p + len, "%d\n", t.temp[i] / 1000);
+ seq_printf(m, "%d ", t.temp[i] / 1000);
+ seq_printf(m, "%d\n", t.temp[i] / 1000);
} else
- len += sprintf(p + len, "not supported\n");
+ seq_printf(m, "not supported\n");
- return len;
+ return 0;
}
static struct ibm_struct thermal_driver_data = {
@@ -5797,39 +5812,38 @@ static struct ibm_struct thermal_driver_data = {
static u8 ecdump_regs[256];
-static int ecdump_read(char *p)
+static int ecdump_read(struct seq_file *m)
{
- int len = 0;
int i, j;
u8 v;
- len += sprintf(p + len, "EC "
+ seq_printf(m, "EC "
" +00 +01 +02 +03 +04 +05 +06 +07"
" +08 +09 +0a +0b +0c +0d +0e +0f\n");
for (i = 0; i < 256; i += 16) {
- len += sprintf(p + len, "EC 0x%02x:", i);
+ seq_printf(m, "EC 0x%02x:", i);
for (j = 0; j < 16; j++) {
if (!acpi_ec_read(i + j, &v))
break;
if (v != ecdump_regs[i + j])
- len += sprintf(p + len, " *%02x", v);
+ seq_printf(m, " *%02x", v);
else
- len += sprintf(p + len, " %02x", v);
+ seq_printf(m, " %02x", v);
ecdump_regs[i + j] = v;
}
- len += sprintf(p + len, "\n");
+ seq_putc(m, '\n');
if (j != 16)
break;
}
/* These are way too dangerous to advertise openly... */
#if 0
- len += sprintf(p + len, "commands:\t0x<offset> 0x<value>"
+ seq_printf(m, "commands:\t0x<offset> 0x<value>"
" (<offset> is 00-ff, <value> is 00-ff)\n");
- len += sprintf(p + len, "commands:\t0x<offset> <value> "
+ seq_printf(m, "commands:\t0x<offset> <value> "
" (<offset> is 00-ff, <value> is 0-255)\n");
#endif
- return len;
+ return 0;
}
static int ecdump_write(char *buf)
@@ -6092,6 +6106,12 @@ static int brightness_get(struct backlight_device *bd)
return status & TP_EC_BACKLIGHT_LVLMSK;
}
+static void tpacpi_brightness_notify_change(void)
+{
+ backlight_force_update(ibm_backlight_device,
+ BACKLIGHT_UPDATE_HOTKEY);
+}
+
static struct backlight_ops ibm_backlight_data = {
.get_brightness = brightness_get,
.update_status = brightness_update_status,
@@ -6120,8 +6140,8 @@ static const struct tpacpi_quirk brightness_quirk_table[] __initconst = {
/* Models with Intel Extreme Graphics 2 */
TPACPI_Q_IBM('1', 'U', TPACPI_BRGHT_Q_NOEC),
- TPACPI_Q_IBM('1', 'V', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_NOEC),
- TPACPI_Q_IBM('1', 'W', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_NOEC),
+ TPACPI_Q_IBM('1', 'V', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
+ TPACPI_Q_IBM('1', 'W', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
/* Models with Intel GMA900 */
TPACPI_Q_IBM('7', '0', TPACPI_BRGHT_Q_NOEC), /* T43, R52 */
@@ -6246,6 +6266,12 @@ static int __init brightness_init(struct ibm_init_struct *iibm)
ibm_backlight_device->props.brightness = b & TP_EC_BACKLIGHT_LVLMSK;
backlight_update_status(ibm_backlight_device);
+ vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_BRGHT,
+ "brightness: registering brightness hotkeys "
+ "as change notification\n");
+ tpacpi_hotkey_driver_mask_set(hotkey_driver_mask
+ | TP_ACPI_HKEY_BRGHTUP_MASK
+ | TP_ACPI_HKEY_BRGHTDWN_MASK);;
return 0;
}
@@ -6270,23 +6296,22 @@ static void brightness_exit(void)
tpacpi_brightness_checkpoint_nvram();
}
-static int brightness_read(char *p)
+static int brightness_read(struct seq_file *m)
{
- int len = 0;
int level;
level = brightness_get(NULL);
if (level < 0) {
- len += sprintf(p + len, "level:\t\tunreadable\n");
+ seq_printf(m, "level:\t\tunreadable\n");
} else {
- len += sprintf(p + len, "level:\t\t%d\n", level);
- len += sprintf(p + len, "commands:\tup, down\n");
- len += sprintf(p + len, "commands:\tlevel <level>"
+ seq_printf(m, "level:\t\t%d\n", level);
+ seq_printf(m, "commands:\tup, down\n");
+ seq_printf(m, "commands:\tlevel <level>"
" (<level> is 0-%d)\n",
(tp_features.bright_16levels) ? 15 : 7);
}
- return len;
+ return 0;
}
static int brightness_write(char *buf)
@@ -6322,6 +6347,9 @@ static int brightness_write(char *buf)
* Doing it this way makes the syscall restartable in case of EINTR
*/
rc = brightness_set(level);
+ if (!rc && ibm_backlight_device)
+ backlight_force_update(ibm_backlight_device,
+ BACKLIGHT_UPDATE_SYSFS);
return (rc == -EINTR)? -ERESTARTSYS : rc;
}
@@ -6338,99 +6366,654 @@ static struct ibm_struct brightness_driver_data = {
* Volume subdriver
*/
-static int volume_offset = 0x30;
+/*
+ * IBM ThinkPads have a simple volume controller with MUTE gating.
+ * Very early Lenovo ThinkPads follow the IBM ThinkPad spec.
+ *
+ * Since the *61 series (and probably also the later *60 series), Lenovo
+ * ThinkPads only implement the MUTE gate.
+ *
+ * EC register 0x30
+ * Bit 6: MUTE (1 mutes sound)
+ * Bit 3-0: Volume
+ * Other bits should be zero as far as we know.
+ *
+ * This is also stored in CMOS NVRAM, byte 0x60, bit 6 (MUTE), and
+ * bits 3-0 (volume). Other bits in NVRAM may have other functions,
+ * such as bit 7 which is used to detect repeated presses of MUTE,
+ * and we leave them unchanged.
+ */
+
+#define TPACPI_ALSA_DRVNAME "ThinkPad EC"
+#define TPACPI_ALSA_SHRTNAME "ThinkPad Console Audio Control"
+#define TPACPI_ALSA_MIXERNAME TPACPI_ALSA_SHRTNAME
+
+static int alsa_index = SNDRV_DEFAULT_IDX1;
+static char *alsa_id = "ThinkPadEC";
+static int alsa_enable = SNDRV_DEFAULT_ENABLE1;
+
+struct tpacpi_alsa_data {
+ struct snd_card *card;
+ struct snd_ctl_elem_id *ctl_mute_id;
+ struct snd_ctl_elem_id *ctl_vol_id;
+};
+
+static struct snd_card *alsa_card;
+
+enum {
+ TP_EC_AUDIO = 0x30,
+
+ /* TP_EC_AUDIO bits */
+ TP_EC_AUDIO_MUTESW = 6,
+
+ /* TP_EC_AUDIO bitmasks */
+ TP_EC_AUDIO_LVL_MSK = 0x0F,
+ TP_EC_AUDIO_MUTESW_MSK = (1 << TP_EC_AUDIO_MUTESW),
+
+ /* Maximum volume */
+ TP_EC_VOLUME_MAX = 14,
+};
+
+enum tpacpi_volume_access_mode {
+ TPACPI_VOL_MODE_AUTO = 0, /* Not implemented yet */
+ TPACPI_VOL_MODE_EC, /* Pure EC control */
+ TPACPI_VOL_MODE_UCMS_STEP, /* UCMS step-based control: N/A */
+ TPACPI_VOL_MODE_ECNVRAM, /* EC control w/ NVRAM store */
+ TPACPI_VOL_MODE_MAX
+};
+
+enum tpacpi_volume_capabilities {
+ TPACPI_VOL_CAP_AUTO = 0, /* Use white/blacklist */
+ TPACPI_VOL_CAP_VOLMUTE, /* Output vol and mute */
+ TPACPI_VOL_CAP_MUTEONLY, /* Output mute only */
+ TPACPI_VOL_CAP_MAX
+};
+
+static enum tpacpi_volume_access_mode volume_mode =
+ TPACPI_VOL_MODE_MAX;
+
+static enum tpacpi_volume_capabilities volume_capabilities;
+static int volume_control_allowed;
-static int volume_read(char *p)
+/*
+ * Used to syncronize writers to TP_EC_AUDIO and
+ * TP_NVRAM_ADDR_MIXER, as we need to do read-modify-write
+ */
+static struct mutex volume_mutex;
+
+static void tpacpi_volume_checkpoint_nvram(void)
{
- int len = 0;
- u8 level;
+ u8 lec = 0;
+ u8 b_nvram;
+ u8 ec_mask;
+
+ if (volume_mode != TPACPI_VOL_MODE_ECNVRAM)
+ return;
+ if (!volume_control_allowed)
+ return;
+
+ vdbg_printk(TPACPI_DBG_MIXER,
+ "trying to checkpoint mixer state to NVRAM...\n");
- if (!acpi_ec_read(volume_offset, &level)) {
- len += sprintf(p + len, "level:\t\tunreadable\n");
+ if (tp_features.mixer_no_level_control)
+ ec_mask = TP_EC_AUDIO_MUTESW_MSK;
+ else
+ ec_mask = TP_EC_AUDIO_MUTESW_MSK | TP_EC_AUDIO_LVL_MSK;
+
+ if (mutex_lock_killable(&volume_mutex) < 0)
+ return;
+
+ if (unlikely(!acpi_ec_read(TP_EC_AUDIO, &lec)))
+ goto unlock;
+ lec &= ec_mask;
+ b_nvram = nvram_read_byte(TP_NVRAM_ADDR_MIXER);
+
+ if (lec != (b_nvram & ec_mask)) {
+ /* NVRAM needs update */
+ b_nvram &= ~ec_mask;
+ b_nvram |= lec;
+ nvram_write_byte(b_nvram, TP_NVRAM_ADDR_MIXER);
+ dbg_printk(TPACPI_DBG_MIXER,
+ "updated NVRAM mixer status to 0x%02x (0x%02x)\n",
+ (unsigned int) lec, (unsigned int) b_nvram);
} else {
- len += sprintf(p + len, "level:\t\t%d\n", level & 0xf);
- len += sprintf(p + len, "mute:\t\t%s\n", onoff(level, 6));
- len += sprintf(p + len, "commands:\tup, down, mute\n");
- len += sprintf(p + len, "commands:\tlevel <level>"
- " (<level> is 0-15)\n");
+ vdbg_printk(TPACPI_DBG_MIXER,
+ "NVRAM mixer status already is 0x%02x (0x%02x)\n",
+ (unsigned int) lec, (unsigned int) b_nvram);
}
- return len;
+unlock:
+ mutex_unlock(&volume_mutex);
}
-static int volume_write(char *buf)
+static int volume_get_status_ec(u8 *status)
{
- int cmos_cmd, inc, i;
- u8 level, mute;
- int new_level, new_mute;
- char *cmd;
+ u8 s;
- while ((cmd = next_cmd(&buf))) {
- if (!acpi_ec_read(volume_offset, &level))
- return -EIO;
- new_mute = mute = level & 0x40;
- new_level = level = level & 0xf;
+ if (!acpi_ec_read(TP_EC_AUDIO, &s))
+ return -EIO;
- if (strlencmp(cmd, "up") == 0) {
- if (mute)
- new_mute = 0;
- else
- new_level = level == 15 ? 15 : level + 1;
- } else if (strlencmp(cmd, "down") == 0) {
- if (mute)
- new_mute = 0;
- else
- new_level = level == 0 ? 0 : level - 1;
- } else if (sscanf(cmd, "level %d", &new_level) == 1 &&
- new_level >= 0 && new_level <= 15) {
- /* new_level set */
- } else if (strlencmp(cmd, "mute") == 0) {
- new_mute = 0x40;
- } else
- return -EINVAL;
+ *status = s;
- if (new_level != level) {
- /* mute doesn't change */
+ dbg_printk(TPACPI_DBG_MIXER, "status 0x%02x\n", s);
- cmos_cmd = (new_level > level) ?
- TP_CMOS_VOLUME_UP : TP_CMOS_VOLUME_DOWN;
- inc = new_level > level ? 1 : -1;
+ return 0;
+}
- if (mute && (issue_thinkpad_cmos_command(cmos_cmd) ||
- !acpi_ec_write(volume_offset, level)))
- return -EIO;
+static int volume_get_status(u8 *status)
+{
+ return volume_get_status_ec(status);
+}
- for (i = level; i != new_level; i += inc)
- if (issue_thinkpad_cmos_command(cmos_cmd) ||
- !acpi_ec_write(volume_offset, i + inc))
- return -EIO;
+static int volume_set_status_ec(const u8 status)
+{
+ if (!acpi_ec_write(TP_EC_AUDIO, status))
+ return -EIO;
- if (mute &&
- (issue_thinkpad_cmos_command(TP_CMOS_VOLUME_MUTE) ||
- !acpi_ec_write(volume_offset, new_level + mute))) {
- return -EIO;
- }
+ dbg_printk(TPACPI_DBG_MIXER, "set EC mixer to 0x%02x\n", status);
+
+ return 0;
+}
+
+static int volume_set_status(const u8 status)
+{
+ return volume_set_status_ec(status);
+}
+
+static int volume_set_mute_ec(const bool mute)
+{
+ int rc;
+ u8 s, n;
+
+ if (mutex_lock_killable(&volume_mutex) < 0)
+ return -EINTR;
+
+ rc = volume_get_status_ec(&s);
+ if (rc)
+ goto unlock;
+
+ n = (mute) ? s | TP_EC_AUDIO_MUTESW_MSK :
+ s & ~TP_EC_AUDIO_MUTESW_MSK;
+
+ if (n != s)
+ rc = volume_set_status_ec(n);
+
+unlock:
+ mutex_unlock(&volume_mutex);
+ return rc;
+}
+
+static int volume_set_mute(const bool mute)
+{
+ dbg_printk(TPACPI_DBG_MIXER, "trying to %smute\n",
+ (mute) ? "" : "un");
+ return volume_set_mute_ec(mute);
+}
+
+static int volume_set_volume_ec(const u8 vol)
+{
+ int rc;
+ u8 s, n;
+
+ if (vol > TP_EC_VOLUME_MAX)
+ return -EINVAL;
+
+ if (mutex_lock_killable(&volume_mutex) < 0)
+ return -EINTR;
+
+ rc = volume_get_status_ec(&s);
+ if (rc)
+ goto unlock;
+
+ n = (s & ~TP_EC_AUDIO_LVL_MSK) | vol;
+
+ if (n != s)
+ rc = volume_set_status_ec(n);
+
+unlock:
+ mutex_unlock(&volume_mutex);
+ return rc;
+}
+
+static int volume_set_volume(const u8 vol)
+{
+ dbg_printk(TPACPI_DBG_MIXER,
+ "trying to set volume level to %hu\n", vol);
+ return volume_set_volume_ec(vol);
+}
+
+static void volume_alsa_notify_change(void)
+{
+ struct tpacpi_alsa_data *d;
+
+ if (alsa_card && alsa_card->private_data) {
+ d = alsa_card->private_data;
+ if (d->ctl_mute_id)
+ snd_ctl_notify(alsa_card,
+ SNDRV_CTL_EVENT_MASK_VALUE,
+ d->ctl_mute_id);
+ if (d->ctl_vol_id)
+ snd_ctl_notify(alsa_card,
+ SNDRV_CTL_EVENT_MASK_VALUE,
+ d->ctl_vol_id);
+ }
+}
+
+static int volume_alsa_vol_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 1;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = TP_EC_VOLUME_MAX;
+ return 0;
+}
+
+static int volume_alsa_vol_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ u8 s;
+ int rc;
+
+ rc = volume_get_status(&s);
+ if (rc < 0)
+ return rc;
+
+ ucontrol->value.integer.value[0] = s & TP_EC_AUDIO_LVL_MSK;
+ return 0;
+}
+
+static int volume_alsa_vol_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ return volume_set_volume(ucontrol->value.integer.value[0]);
+}
+
+#define volume_alsa_mute_info snd_ctl_boolean_mono_info
+
+static int volume_alsa_mute_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ u8 s;
+ int rc;
+
+ rc = volume_get_status(&s);
+ if (rc < 0)
+ return rc;
+
+ ucontrol->value.integer.value[0] =
+ (s & TP_EC_AUDIO_MUTESW_MSK) ? 0 : 1;
+ return 0;
+}
+
+static int volume_alsa_mute_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ return volume_set_mute(!ucontrol->value.integer.value[0]);
+}
+
+static struct snd_kcontrol_new volume_alsa_control_vol __devinitdata = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Console Playback Volume",
+ .index = 0,
+ .access = SNDRV_CTL_ELEM_ACCESS_READ,
+ .info = volume_alsa_vol_info,
+ .get = volume_alsa_vol_get,
+};
+
+static struct snd_kcontrol_new volume_alsa_control_mute __devinitdata = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Console Playback Switch",
+ .index = 0,
+ .access = SNDRV_CTL_ELEM_ACCESS_READ,
+ .info = volume_alsa_mute_info,
+ .get = volume_alsa_mute_get,
+};
+
+static void volume_suspend(pm_message_t state)
+{
+ tpacpi_volume_checkpoint_nvram();
+}
+
+static void volume_resume(void)
+{
+ volume_alsa_notify_change();
+}
+
+static void volume_shutdown(void)
+{
+ tpacpi_volume_checkpoint_nvram();
+}
+
+static void volume_exit(void)
+{
+ if (alsa_card) {
+ snd_card_free(alsa_card);
+ alsa_card = NULL;
+ }
+
+ tpacpi_volume_checkpoint_nvram();
+}
+
+static int __init volume_create_alsa_mixer(void)
+{
+ struct snd_card *card;
+ struct tpacpi_alsa_data *data;
+ struct snd_kcontrol *ctl_vol;
+ struct snd_kcontrol *ctl_mute;
+ int rc;
+
+ rc = snd_card_create(alsa_index, alsa_id, THIS_MODULE,
+ sizeof(struct tpacpi_alsa_data), &card);
+ if (rc < 0)
+ return rc;
+ if (!card)
+ return -ENOMEM;
+
+ BUG_ON(!card->private_data);
+ data = card->private_data;
+ data->card = card;
+
+ strlcpy(card->driver, TPACPI_ALSA_DRVNAME,
+ sizeof(card->driver));
+ strlcpy(card->shortname, TPACPI_ALSA_SHRTNAME,
+ sizeof(card->shortname));
+ snprintf(card->mixername, sizeof(card->mixername), "ThinkPad EC %s",
+ (thinkpad_id.ec_version_str) ?
+ thinkpad_id.ec_version_str : "(unknown)");
+ snprintf(card->longname, sizeof(card->longname),
+ "%s at EC reg 0x%02x, fw %s", card->shortname, TP_EC_AUDIO,
+ (thinkpad_id.ec_version_str) ?
+ thinkpad_id.ec_version_str : "unknown");
+
+ if (volume_control_allowed) {
+ volume_alsa_control_vol.put = volume_alsa_vol_put;
+ volume_alsa_control_vol.access =
+ SNDRV_CTL_ELEM_ACCESS_READWRITE;
+
+ volume_alsa_control_mute.put = volume_alsa_mute_put;
+ volume_alsa_control_mute.access =
+ SNDRV_CTL_ELEM_ACCESS_READWRITE;
+ }
+
+ if (!tp_features.mixer_no_level_control) {
+ ctl_vol = snd_ctl_new1(&volume_alsa_control_vol, NULL);
+ rc = snd_ctl_add(card, ctl_vol);
+ if (rc < 0) {
+ printk(TPACPI_ERR
+ "Failed to create ALSA volume control\n");
+ goto err_out;
}
+ data->ctl_vol_id = &ctl_vol->id;
+ }
- if (new_mute != mute) {
- /* level doesn't change */
+ ctl_mute = snd_ctl_new1(&volume_alsa_control_mute, NULL);
+ rc = snd_ctl_add(card, ctl_mute);
+ if (rc < 0) {
+ printk(TPACPI_ERR "Failed to create ALSA mute control\n");
+ goto err_out;
+ }
+ data->ctl_mute_id = &ctl_mute->id;
- cmos_cmd = (new_mute) ?
- TP_CMOS_VOLUME_MUTE : TP_CMOS_VOLUME_UP;
+ snd_card_set_dev(card, &tpacpi_pdev->dev);
+ rc = snd_card_register(card);
- if (issue_thinkpad_cmos_command(cmos_cmd) ||
- !acpi_ec_write(volume_offset, level + new_mute))
- return -EIO;
+err_out:
+ if (rc < 0) {
+ snd_card_free(card);
+ card = NULL;
+ }
+
+ alsa_card = card;
+ return rc;
+}
+
+#define TPACPI_VOL_Q_MUTEONLY 0x0001 /* Mute-only control available */
+#define TPACPI_VOL_Q_LEVEL 0x0002 /* Volume control available */
+
+static const struct tpacpi_quirk volume_quirk_table[] __initconst = {
+ /* Whitelist volume level on all IBM by default */
+ { .vendor = PCI_VENDOR_ID_IBM,
+ .bios = TPACPI_MATCH_ANY,
+ .ec = TPACPI_MATCH_ANY,
+ .quirks = TPACPI_VOL_Q_LEVEL },
+
+ /* Lenovo models with volume control (needs confirmation) */
+ TPACPI_QEC_LNV('7', 'C', TPACPI_VOL_Q_LEVEL), /* R60/i */
+ TPACPI_QEC_LNV('7', 'E', TPACPI_VOL_Q_LEVEL), /* R60e/i */
+ TPACPI_QEC_LNV('7', '9', TPACPI_VOL_Q_LEVEL), /* T60/p */
+ TPACPI_QEC_LNV('7', 'B', TPACPI_VOL_Q_LEVEL), /* X60/s */
+ TPACPI_QEC_LNV('7', 'J', TPACPI_VOL_Q_LEVEL), /* X60t */
+ TPACPI_QEC_LNV('7', '7', TPACPI_VOL_Q_LEVEL), /* Z60 */
+ TPACPI_QEC_LNV('7', 'F', TPACPI_VOL_Q_LEVEL), /* Z61 */
+
+ /* Whitelist mute-only on all Lenovo by default */
+ { .vendor = PCI_VENDOR_ID_LENOVO,
+ .bios = TPACPI_MATCH_ANY,
+ .ec = TPACPI_MATCH_ANY,
+ .quirks = TPACPI_VOL_Q_MUTEONLY }
+};
+
+static int __init volume_init(struct ibm_init_struct *iibm)
+{
+ unsigned long quirks;
+ int rc;
+
+ vdbg_printk(TPACPI_DBG_INIT, "initializing volume subdriver\n");
+
+ mutex_init(&volume_mutex);
+
+ /*
+ * Check for module parameter bogosity, note that we
+ * init volume_mode to TPACPI_VOL_MODE_MAX in order to be
+ * able to detect "unspecified"
+ */
+ if (volume_mode > TPACPI_VOL_MODE_MAX)
+ return -EINVAL;
+
+ if (volume_mode == TPACPI_VOL_MODE_UCMS_STEP) {
+ printk(TPACPI_ERR
+ "UCMS step volume mode not implemented, "
+ "please contact %s\n", TPACPI_MAIL);
+ return 1;
+ }
+
+ if (volume_capabilities >= TPACPI_VOL_CAP_MAX)
+ return -EINVAL;
+
+ /*
+ * The ALSA mixer is our primary interface.
+ * When disabled, don't install the subdriver at all
+ */
+ if (!alsa_enable) {
+ vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_MIXER,
+ "ALSA mixer disabled by parameter, "
+ "not loading volume subdriver...\n");
+ return 1;
+ }
+
+ quirks = tpacpi_check_quirks(volume_quirk_table,
+ ARRAY_SIZE(volume_quirk_table));
+
+ switch (volume_capabilities) {
+ case TPACPI_VOL_CAP_AUTO:
+ if (quirks & TPACPI_VOL_Q_MUTEONLY)
+ tp_features.mixer_no_level_control = 1;
+ else if (quirks & TPACPI_VOL_Q_LEVEL)
+ tp_features.mixer_no_level_control = 0;
+ else
+ return 1; /* no mixer */
+ break;
+ case TPACPI_VOL_CAP_VOLMUTE:
+ tp_features.mixer_no_level_control = 0;
+ break;
+ case TPACPI_VOL_CAP_MUTEONLY:
+ tp_features.mixer_no_level_control = 1;
+ break;
+ default:
+ return 1;
+ }
+
+ if (volume_capabilities != TPACPI_VOL_CAP_AUTO)
+ dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_MIXER,
+ "using user-supplied volume_capabilities=%d\n",
+ volume_capabilities);
+
+ if (volume_mode == TPACPI_VOL_MODE_AUTO ||
+ volume_mode == TPACPI_VOL_MODE_MAX) {
+ volume_mode = TPACPI_VOL_MODE_ECNVRAM;
+
+ dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_MIXER,
+ "driver auto-selected volume_mode=%d\n",
+ volume_mode);
+ } else {
+ dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_MIXER,
+ "using user-supplied volume_mode=%d\n",
+ volume_mode);
+ }
+
+ vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_MIXER,
+ "mute is supported, volume control is %s\n",
+ str_supported(!tp_features.mixer_no_level_control));
+
+ rc = volume_create_alsa_mixer();
+ if (rc) {
+ printk(TPACPI_ERR
+ "Could not create the ALSA mixer interface\n");
+ return rc;
+ }
+
+ printk(TPACPI_INFO
+ "Console audio control enabled, mode: %s\n",
+ (volume_control_allowed) ?
+ "override (read/write)" :
+ "monitor (read only)");
+
+ vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_MIXER,
+ "registering volume hotkeys as change notification\n");
+ tpacpi_hotkey_driver_mask_set(hotkey_driver_mask
+ | TP_ACPI_HKEY_VOLUP_MASK
+ | TP_ACPI_HKEY_VOLDWN_MASK
+ | TP_ACPI_HKEY_MUTE_MASK);
+
+ return 0;
+}
+
+static int volume_read(struct seq_file *m)
+{
+ u8 status;
+
+ if (volume_get_status(&status) < 0) {
+ seq_printf(m, "level:\t\tunreadable\n");
+ } else {
+ if (tp_features.mixer_no_level_control)
+ seq_printf(m, "level:\t\tunsupported\n");
+ else
+ seq_printf(m, "level:\t\t%d\n",
+ status & TP_EC_AUDIO_LVL_MSK);
+
+ seq_printf(m, "mute:\t\t%s\n",
+ onoff(status, TP_EC_AUDIO_MUTESW));
+
+ if (volume_control_allowed) {
+ seq_printf(m, "commands:\tunmute, mute\n");
+ if (!tp_features.mixer_no_level_control) {
+ seq_printf(m,
+ "commands:\tup, down\n");
+ seq_printf(m,
+ "commands:\tlevel <level>"
+ " (<level> is 0-%d)\n",
+ TP_EC_VOLUME_MAX);
+ }
}
}
return 0;
}
+static int volume_write(char *buf)
+{
+ u8 s;
+ u8 new_level, new_mute;
+ int l;
+ char *cmd;
+ int rc;
+
+ /*
+ * We do allow volume control at driver startup, so that the
+ * user can set initial state through the volume=... parameter hack.
+ */
+ if (!volume_control_allowed && tpacpi_lifecycle != TPACPI_LIFE_INIT) {
+ if (unlikely(!tp_warned.volume_ctrl_forbidden)) {
+ tp_warned.volume_ctrl_forbidden = 1;
+ printk(TPACPI_NOTICE
+ "Console audio control in monitor mode, "
+ "changes are not allowed.\n");
+ printk(TPACPI_NOTICE
+ "Use the volume_control=1 module parameter "
+ "to enable volume control\n");
+ }
+ return -EPERM;
+ }
+
+ rc = volume_get_status(&s);
+ if (rc < 0)
+ return rc;
+
+ new_level = s & TP_EC_AUDIO_LVL_MSK;
+ new_mute = s & TP_EC_AUDIO_MUTESW_MSK;
+
+ while ((cmd = next_cmd(&buf))) {
+ if (!tp_features.mixer_no_level_control) {
+ if (strlencmp(cmd, "up") == 0) {
+ if (new_mute)
+ new_mute = 0;
+ else if (new_level < TP_EC_VOLUME_MAX)
+ new_level++;
+ continue;
+ } else if (strlencmp(cmd, "down") == 0) {
+ if (new_mute)
+ new_mute = 0;
+ else if (new_level > 0)
+ new_level--;
+ continue;
+ } else if (sscanf(cmd, "level %u", &l) == 1 &&
+ l >= 0 && l <= TP_EC_VOLUME_MAX) {
+ new_level = l;
+ continue;
+ }
+ }
+ if (strlencmp(cmd, "mute") == 0)
+ new_mute = TP_EC_AUDIO_MUTESW_MSK;
+ else if (strlencmp(cmd, "unmute") == 0)
+ new_mute = 0;
+ else
+ return -EINVAL;
+ }
+
+ if (tp_features.mixer_no_level_control) {
+ tpacpi_disclose_usertask("procfs volume", "%smute\n",
+ new_mute ? "" : "un");
+ rc = volume_set_mute(!!new_mute);
+ } else {
+ tpacpi_disclose_usertask("procfs volume",
+ "%smute and set level to %d\n",
+ new_mute ? "" : "un", new_level);
+ rc = volume_set_status(new_mute | new_level);
+ }
+ volume_alsa_notify_change();
+
+ return (rc == -EINTR) ? -ERESTARTSYS : rc;
+}
+
static struct ibm_struct volume_driver_data = {
.name = "volume",
.read = volume_read,
.write = volume_write,
+ .exit = volume_exit,
+ .suspend = volume_suspend,
+ .resume = volume_resume,
+ .shutdown = volume_shutdown,
};
/*************************************************************************
@@ -7507,9 +8090,8 @@ static void fan_resume(void)
}
}
-static int fan_read(char *p)
+static int fan_read(struct seq_file *m)
{
- int len = 0;
int rc;
u8 status;
unsigned int speed = 0;
@@ -7521,7 +8103,7 @@ static int fan_read(char *p)
if (rc < 0)
return rc;
- len += sprintf(p + len, "status:\t\t%s\n"
+ seq_printf(m, "status:\t\t%s\n"
"level:\t\t%d\n",
(status != 0) ? "enabled" : "disabled", status);
break;
@@ -7532,54 +8114,54 @@ static int fan_read(char *p)
if (rc < 0)
return rc;
- len += sprintf(p + len, "status:\t\t%s\n",
+ seq_printf(m, "status:\t\t%s\n",
(status != 0) ? "enabled" : "disabled");
rc = fan_get_speed(&speed);
if (rc < 0)
return rc;
- len += sprintf(p + len, "speed:\t\t%d\n", speed);
+ seq_printf(m, "speed:\t\t%d\n", speed);
if (status & TP_EC_FAN_FULLSPEED)
/* Disengaged mode takes precedence */
- len += sprintf(p + len, "level:\t\tdisengaged\n");
+ seq_printf(m, "level:\t\tdisengaged\n");
else if (status & TP_EC_FAN_AUTO)
- len += sprintf(p + len, "level:\t\tauto\n");
+ seq_printf(m, "level:\t\tauto\n");
else
- len += sprintf(p + len, "level:\t\t%d\n", status);
+ seq_printf(m, "level:\t\t%d\n", status);
break;
case TPACPI_FAN_NONE:
default:
- len += sprintf(p + len, "status:\t\tnot supported\n");
+ seq_printf(m, "status:\t\tnot supported\n");
}
if (fan_control_commands & TPACPI_FAN_CMD_LEVEL) {
- len += sprintf(p + len, "commands:\tlevel <level>");
+ seq_printf(m, "commands:\tlevel <level>");
switch (fan_control_access_mode) {
case TPACPI_FAN_WR_ACPI_SFAN:
- len += sprintf(p + len, " (<level> is 0-7)\n");
+ seq_printf(m, " (<level> is 0-7)\n");
break;
default:
- len += sprintf(p + len, " (<level> is 0-7, "
+ seq_printf(m, " (<level> is 0-7, "
"auto, disengaged, full-speed)\n");
break;
}
}
if (fan_control_commands & TPACPI_FAN_CMD_ENABLE)
- len += sprintf(p + len, "commands:\tenable, disable\n"
+ seq_printf(m, "commands:\tenable, disable\n"
"commands:\twatchdog <timeout> (<timeout> "
"is 0 (off), 1-120 (seconds))\n");
if (fan_control_commands & TPACPI_FAN_CMD_SPEED)
- len += sprintf(p + len, "commands:\tspeed <speed>"
+ seq_printf(m, "commands:\tspeed <speed>"
" (<speed> is 0-65535)\n");
- return len;
+ return 0;
}
static int fan_write_cmd_level(const char *cmd, int *rc)
@@ -7721,10 +8303,23 @@ static struct ibm_struct fan_driver_data = {
*/
static void tpacpi_driver_event(const unsigned int hkey_event)
{
+ if (ibm_backlight_device) {
+ switch (hkey_event) {
+ case TP_HKEY_EV_BRGHT_UP:
+ case TP_HKEY_EV_BRGHT_DOWN:
+ tpacpi_brightness_notify_change();
+ }
+ }
+ if (alsa_card) {
+ switch (hkey_event) {
+ case TP_HKEY_EV_VOL_UP:
+ case TP_HKEY_EV_VOL_DOWN:
+ case TP_HKEY_EV_VOL_MUTE:
+ volume_alsa_notify_change();
+ }
+ }
}
-
-
static void hotkey_driver_event(const unsigned int scancode)
{
tpacpi_driver_event(TP_HKEY_EV_HOTKEY_BASE + scancode);
@@ -7853,19 +8448,19 @@ static int __init ibm_init(struct ibm_init_struct *iibm)
"%s installed\n", ibm->name);
if (ibm->read) {
- entry = create_proc_entry(ibm->name,
- S_IFREG | S_IRUGO | S_IWUSR,
- proc_dir);
+ mode_t mode;
+
+ mode = S_IRUGO;
+ if (ibm->write)
+ mode |= S_IWUSR;
+ entry = proc_create_data(ibm->name, mode, proc_dir,
+ &dispatch_proc_fops, ibm);
if (!entry) {
printk(TPACPI_ERR "unable to create proc entry %s\n",
ibm->name);
ret = -ENODEV;
goto err_out;
}
- entry->data = ibm;
- entry->read_proc = &dispatch_procfs_read;
- if (ibm->write)
- entry->write_proc = &dispatch_procfs_write;
ibm->flags.proc_created = 1;
}
@@ -8077,6 +8672,7 @@ static struct ibm_init_struct ibms_init[] __initdata = {
.data = &brightness_driver_data,
},
{
+ .init = volume_init,
.data = &volume_driver_data,
},
{
@@ -8112,36 +8708,59 @@ static int __init set_ibm_param(const char *val, struct kernel_param *kp)
return -EINVAL;
}
-module_param(experimental, int, 0);
+module_param(experimental, int, 0444);
MODULE_PARM_DESC(experimental,
"Enables experimental features when non-zero");
module_param_named(debug, dbg_level, uint, 0);
MODULE_PARM_DESC(debug, "Sets debug level bit-mask");
-module_param(force_load, bool, 0);
+module_param(force_load, bool, 0444);
MODULE_PARM_DESC(force_load,
"Attempts to load the driver even on a "
"mis-identified ThinkPad when true");
-module_param_named(fan_control, fan_control_allowed, bool, 0);
+module_param_named(fan_control, fan_control_allowed, bool, 0444);
MODULE_PARM_DESC(fan_control,
"Enables setting fan parameters features when true");
-module_param_named(brightness_mode, brightness_mode, uint, 0);
+module_param_named(brightness_mode, brightness_mode, uint, 0444);
MODULE_PARM_DESC(brightness_mode,
"Selects brightness control strategy: "
"0=auto, 1=EC, 2=UCMS, 3=EC+NVRAM");
-module_param(brightness_enable, uint, 0);
+module_param(brightness_enable, uint, 0444);
MODULE_PARM_DESC(brightness_enable,
"Enables backlight control when 1, disables when 0");
-module_param(hotkey_report_mode, uint, 0);
+module_param(hotkey_report_mode, uint, 0444);
MODULE_PARM_DESC(hotkey_report_mode,
"used for backwards compatibility with userspace, "
"see documentation");
+module_param_named(volume_mode, volume_mode, uint, 0444);
+MODULE_PARM_DESC(volume_mode,
+ "Selects volume control strategy: "
+ "0=auto, 1=EC, 2=N/A, 3=EC+NVRAM");
+
+module_param_named(volume_capabilities, volume_capabilities, uint, 0444);
+MODULE_PARM_DESC(volume_capabilities,
+ "Selects the mixer capabilites: "
+ "0=auto, 1=volume and mute, 2=mute only");
+
+module_param_named(volume_control, volume_control_allowed, bool, 0444);
+MODULE_PARM_DESC(volume_control,
+ "Enables software override for the console audio "
+ "control when true");
+
+/* ALSA module API parameters */
+module_param_named(index, alsa_index, int, 0444);
+MODULE_PARM_DESC(index, "ALSA index for the ACPI EC Mixer");
+module_param_named(id, alsa_id, charp, 0444);
+MODULE_PARM_DESC(id, "ALSA id for the ACPI EC Mixer");
+module_param_named(enable, alsa_enable, bool, 0444);
+MODULE_PARM_DESC(enable, "Enable the ALSA interface for the ACPI EC Mixer");
+
#define TPACPI_PARAM(feature) \
module_param_call(feature, set_ibm_param, NULL, NULL, 0); \
MODULE_PARM_DESC(feature, "Simulates thinkpad-acpi procfs command " \
@@ -8160,25 +8779,25 @@ TPACPI_PARAM(volume);
TPACPI_PARAM(fan);
#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
-module_param(dbg_wlswemul, uint, 0);
+module_param(dbg_wlswemul, uint, 0444);
MODULE_PARM_DESC(dbg_wlswemul, "Enables WLSW emulation");
module_param_named(wlsw_state, tpacpi_wlsw_emulstate, bool, 0);
MODULE_PARM_DESC(wlsw_state,
"Initial state of the emulated WLSW switch");
-module_param(dbg_bluetoothemul, uint, 0);
+module_param(dbg_bluetoothemul, uint, 0444);
MODULE_PARM_DESC(dbg_bluetoothemul, "Enables bluetooth switch emulation");
module_param_named(bluetooth_state, tpacpi_bluetooth_emulstate, bool, 0);
MODULE_PARM_DESC(bluetooth_state,
"Initial state of the emulated bluetooth switch");
-module_param(dbg_wwanemul, uint, 0);
+module_param(dbg_wwanemul, uint, 0444);
MODULE_PARM_DESC(dbg_wwanemul, "Enables WWAN switch emulation");
module_param_named(wwan_state, tpacpi_wwan_emulstate, bool, 0);
MODULE_PARM_DESC(wwan_state,
"Initial state of the emulated WWAN switch");
-module_param(dbg_uwbemul, uint, 0);
+module_param(dbg_uwbemul, uint, 0444);
MODULE_PARM_DESC(dbg_uwbemul, "Enables UWB switch emulation");
module_param_named(uwb_state, tpacpi_uwb_emulstate, bool, 0);
MODULE_PARM_DESC(uwb_state,
@@ -8371,6 +8990,7 @@ static int __init thinkpad_acpi_module_init(void)
PCI_VENDOR_ID_IBM;
tpacpi_inputdev->id.product = TPACPI_HKEY_INPUT_PRODUCT;
tpacpi_inputdev->id.version = TPACPI_HKEY_INPUT_VERSION;
+ tpacpi_inputdev->dev.parent = &tpacpi_pdev->dev;
}
for (i = 0; i < ARRAY_SIZE(ibms_init); i++) {
ret = ibm_init(&ibms_init[i]);
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 01:41:42 +0000