diff options
-rw-r--r-- | arch/arm/common/clkdev.c | 11 | ||||
-rw-r--r-- | arch/arm/mach-imx/generic.c | 36 | ||||
-rw-r--r-- | arch/arm/mach-mx2/Makefile | 2 | ||||
-rw-r--r-- | arch/arm/mach-mx2/devices.c | 2 | ||||
-rw-r--r-- | arch/arm/plat-mxc/Makefile | 2 | ||||
-rw-r--r-- | arch/arm/plat-mxc/include/mach/system.h | 5 | ||||
-rw-r--r-- | arch/arm/plat-mxc/system.c (renamed from arch/arm/mach-mx2/system.c) | 50 | ||||
-rw-r--r-- | drivers/video/imxfb.c | 42 | ||||
-rw-r--r-- | include/linux/clk.h | 17 |
9 files changed, 96 insertions, 71 deletions
diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c index 1037bba18329..5589444ff437 100644 --- a/arch/arm/common/clkdev.c +++ b/arch/arm/common/clkdev.c @@ -62,9 +62,8 @@ static struct clk *clk_find(const char *dev_id, const char *con_id) return clk; } -struct clk *clk_get(struct device *dev, const char *con_id) +struct clk *clk_get_sys(const char *dev_id, const char *con_id) { - const char *dev_id = dev ? dev_name(dev) : NULL; struct clk *clk; mutex_lock(&clocks_mutex); @@ -75,6 +74,14 @@ struct clk *clk_get(struct device *dev, const char *con_id) return clk ? clk : ERR_PTR(-ENOENT); } +EXPORT_SYMBOL(clk_get_sys); + +struct clk *clk_get(struct device *dev, const char *con_id) +{ + const char *dev_id = dev ? dev_name(dev) : NULL; + + return clk_get_sys(dev_id, con_id); +} EXPORT_SYMBOL(clk_get); void clk_put(struct clk *clk) diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c index 887cb21f75b0..05f1739ee127 100644 --- a/arch/arm/mach-imx/generic.c +++ b/arch/arm/mach-imx/generic.c @@ -29,7 +29,6 @@ #include <linux/string.h> #include <asm/errno.h> -#include <mach/imxfb.h> #include <mach/hardware.h> #include <mach/imx-regs.h> @@ -245,43 +244,8 @@ void __init imx_set_mmc_info(struct imxmmc_platform_data *info) imx_mmc_device.dev.platform_data = info; } -static struct imx_fb_platform_data imx_fb_info; - -void __init set_imx_fb_info(struct imx_fb_platform_data *hard_imx_fb_info) -{ - memcpy(&imx_fb_info,hard_imx_fb_info,sizeof(struct imx_fb_platform_data)); -} - -static struct resource imxfb_resources[] = { - [0] = { - .start = 0x00205000, - .end = 0x002050FF, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = LCDC_INT, - .end = LCDC_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 fb_dma_mask = ~(u64)0; - -static struct platform_device imxfb_device = { - .name = "imx-fb", - .id = 0, - .dev = { - .platform_data = &imx_fb_info, - .dma_mask = &fb_dma_mask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(imxfb_resources), - .resource = imxfb_resources, -}; - static struct platform_device *devices[] __initdata = { &imx_mmc_device, - &imxfb_device, }; static struct map_desc imx_io_desc[] __initdata = { diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile index 6e1a2bffc812..950649a91540 100644 --- a/arch/arm/mach-mx2/Makefile +++ b/arch/arm/mach-mx2/Makefile @@ -4,7 +4,7 @@ # Object file lists. -obj-y := system.o generic.o devices.o serial.o +obj-y := generic.o devices.o serial.o obj-$(CONFIG_MACH_MX21) += clock_imx21.o diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c index f81aa8a8fbb4..a0f1b3674327 100644 --- a/arch/arm/mach-mx2/devices.c +++ b/arch/arm/mach-mx2/devices.c @@ -229,7 +229,6 @@ struct platform_device mxc_nand_device = { .resource = mxc_nand_resources, }; -#ifdef CONFIG_FB_IMX /* * lcdc: * - i.MX1: the basic controller @@ -259,7 +258,6 @@ struct platform_device mxc_fb_device = { .coherent_dma_mask = 0xFFFFFFFF, }, }; -#endif #ifdef CONFIG_MACH_MX27 static struct resource mxc_fec_resources[] = { diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index 564fd4ebf38a..055406312b69 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o +obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h index cd03ebaa49bc..e56241af870e 100644 --- a/arch/arm/plat-mxc/include/mach/system.h +++ b/arch/arm/plat-mxc/include/mach/system.h @@ -26,9 +26,6 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode, const char *cmd) -{ - cpu_reset(0); -} +void arch_reset(char mode, const char *cmd); #endif /* __ASM_ARCH_MXC_SYSTEM_H__ */ diff --git a/arch/arm/mach-mx2/system.c b/arch/arm/plat-mxc/system.c index 92c79d4bd162..79c37577c916 100644 --- a/arch/arm/mach-mx2/system.c +++ b/arch/arm/plat-mxc/system.c @@ -3,6 +3,7 @@ * Copyright (C) 2000 Deep Blue Solutions Ltd * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, yanok@emcraft.com * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -22,42 +23,45 @@ #include <linux/kernel.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/err.h> +#include <linux/delay.h> #include <mach/hardware.h> #include <asm/proc-fns.h> #include <asm/system.h> -/* - * Put the CPU into idle mode. It is called by default_idle() - * in process.c file. - */ -void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks. - */ - cpu_do_idle(); -} - -#define WDOG_WCR_REG IO_ADDRESS(WDOG_BASE_ADDR) -#define WDOG_WCR_SRS (1 << 4) +#ifdef CONFIG_ARCH_MX1 +#define WDOG_WCR_REG IO_ADDRESS(WDT_BASE_ADDR) +#define WDOG_WCR_ENABLE (1 << 0) +#else +#define WDOG_WCR_REG IO_ADDRESS(WDOG_BASE_ADDR) +#define WDOG_WCR_ENABLE (1 << 2) +#endif /* * Reset the system. It is called by machine_restart(). */ void arch_reset(char mode, const char *cmd) { - struct clk *clk; + if (!cpu_is_mx1()) { + struct clk *clk; - clk = clk_get(NULL, "wdog_clk"); - if (!clk) { - printk(KERN_ERR"Cannot activate the watchdog. Giving up\n"); - return; + clk = clk_get_sys("imx-wdt.0", NULL); + if (!IS_ERR(clk)) + clk_enable(clk); } - clk_enable(clk); - /* Assert SRS signal */ - __raw_writew(__raw_readw(WDOG_WCR_REG) & ~WDOG_WCR_SRS, WDOG_WCR_REG); + __raw_writew(WDOG_WCR_ENABLE, WDOG_WCR_REG); + + /* wait for reset to assert... */ + mdelay(500); + + printk(KERN_ERR "Watchdog reset failed to assert reset\n"); + + /* delay to allow the serial port to show the message */ + mdelay(50); + + /* we'll take a jump through zero as a poor second */ + cpu_reset(0); } diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c index bd1cb75cd14b..15a0ee6d8e23 100644 --- a/drivers/video/imxfb.c +++ b/drivers/video/imxfb.c @@ -26,9 +26,11 @@ #include <linux/init.h> #include <linux/ioport.h> #include <linux/cpufreq.h> +#include <linux/clk.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/io.h> +#include <linux/math64.h> #include <mach/imxfb.h> @@ -141,6 +143,7 @@ struct imxfb_rgb { struct imxfb_info { struct platform_device *pdev; void __iomem *regs; + struct clk *clk; u_int max_bpp; u_int max_xres; @@ -324,7 +327,7 @@ static int imxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) break; case 16: default: - if (readl(fbi->regs + LCDC_PCR) & PCR_TFT) + if (fbi->pcr & PCR_TFT) rgb = &def_rgb_16_tft; else rgb = &def_rgb_16_stn; @@ -403,6 +406,8 @@ static void imxfb_enable_controller(struct imxfb_info *fbi) writel(RMCR_LCDC_EN, fbi->regs + LCDC_RMCR); + clk_enable(fbi->clk); + if (fbi->backlight_power) fbi->backlight_power(1); if (fbi->lcd_power) @@ -418,6 +423,8 @@ static void imxfb_disable_controller(struct imxfb_info *fbi) if (fbi->lcd_power) fbi->lcd_power(0); + clk_disable(fbi->clk); + writel(0, fbi->regs + LCDC_RMCR); } @@ -461,6 +468,9 @@ static struct fb_ops imxfb_ops = { static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *info) { struct imxfb_info *fbi = info->par; + unsigned int pcr, lcd_clk; + unsigned long long tmp; + pr_debug("var: xres=%d hslen=%d lm=%d rm=%d\n", var->xres, var->hsync_len, var->left_margin, var->right_margin); @@ -507,7 +517,23 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf writel(SIZE_XMAX(var->xres) | SIZE_YMAX(var->yres), fbi->regs + LCDC_SIZE); - writel(fbi->pcr, fbi->regs + LCDC_PCR); + + lcd_clk = clk_get_rate(fbi->clk); + tmp = var->pixclock * (unsigned long long)lcd_clk; + do_div(tmp, 1000000); + if (do_div(tmp, 1000000) > 500000) + tmp++; + pcr = (unsigned int)tmp; + if (--pcr > 0x3F) { + pcr = 0x3F; + printk(KERN_WARNING "Must limit pixel clock to %uHz\n", + lcd_clk / pcr); + } + + /* add sync polarities */ + pcr |= fbi->pcr & ~0x3F; + + writel(pcr, fbi->regs + LCDC_PCR); writel(fbi->pwmr, fbi->regs + LCDC_PWMR); writel(fbi->lscr1, fbi->regs + LCDC_LSCR1); writel(fbi->dmacr, fbi->regs + LCDC_DMACR); @@ -649,6 +675,13 @@ static int __init imxfb_probe(struct platform_device *pdev) goto failed_req; } + fbi->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(fbi->clk)) { + ret = PTR_ERR(fbi->clk);; + dev_err(&pdev->dev, "unable to get clock: %d\n", ret); + goto failed_getclock; + } + fbi->regs = ioremap(res->start, resource_size(res)); if (fbi->regs == NULL) { printk(KERN_ERR"Cannot map frame buffer registers\n"); @@ -717,6 +750,8 @@ failed_platform_init: dma_free_writecombine(&pdev->dev,fbi->map_size,fbi->map_cpu, fbi->map_dma); failed_map: + clk_put(fbi->clk); +failed_getclock: iounmap(fbi->regs); failed_ioremap: release_mem_region(res->start, res->end - res->start); @@ -751,6 +786,9 @@ static int __devexit imxfb_remove(struct platform_device *pdev) iounmap(fbi->regs); release_mem_region(res->start, res->end - res->start + 1); + clk_disable(fbi->clk); + clk_put(fbi->clk); + platform_set_drvdata(pdev, NULL); return 0; diff --git a/include/linux/clk.h b/include/linux/clk.h index 778777316ea4..1db9bbf444a3 100644 --- a/include/linux/clk.h +++ b/include/linux/clk.h @@ -125,4 +125,21 @@ int clk_set_parent(struct clk *clk, struct clk *parent); */ struct clk *clk_get_parent(struct clk *clk); +/** + * clk_get_sys - get a clock based upon the device name + * @dev_id: device name + * @con_id: connection ID + * + * Returns a struct clk corresponding to the clock producer, or + * valid IS_ERR() condition containing errno. The implementation + * uses @dev_id and @con_id to determine the clock consumer, and + * thereby the clock producer. In contrast to clk_get() this function + * takes the device name instead of the device itself for identification. + * + * Drivers must assume that the clock source is not enabled. + * + * clk_get_sys should not be called from within interrupt context. + */ +struct clk *clk_get_sys(const char *dev_id, const char *con_id); + #endif |