diff options
| -rw-r--r-- | arch/x86/include/asm/olpc.h | 10 | ||||
| -rw-r--r-- | drivers/staging/olpc_dcon/TODO | 1 | ||||
| -rw-r--r-- | drivers/staging/olpc_dcon/olpc_dcon.c | 3 | ||||
| -rw-r--r-- | drivers/staging/olpc_dcon/olpc_dcon.h | 20 | ||||
| -rw-r--r-- | drivers/staging/olpc_dcon/olpc_dcon_xo_1.c | 168 | ||||
| -rw-r--r-- | drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c | 4 | ||||
| -rw-r--r-- | include/linux/cs5535.h | 4 |
7 files changed, 114 insertions, 96 deletions
diff --git a/arch/x86/include/asm/olpc.h b/arch/x86/include/asm/olpc.h index 42a978c0c1b3..f482010350fb 100644 --- a/arch/x86/include/asm/olpc.h +++ b/arch/x86/include/asm/olpc.h @@ -107,10 +107,14 @@ extern int olpc_ec_mask_unset(uint8_t bits); /* GPIO assignments */ #define OLPC_GPIO_MIC_AC 1 -#define OLPC_GPIO_DCON_IRQ geode_gpio(7) +#define OLPC_GPIO_DCON_STAT0 5 +#define OLPC_GPIO_DCON_STAT1 6 +#define OLPC_GPIO_DCON_IRQ 7 #define OLPC_GPIO_THRM_ALRM geode_gpio(10) -#define OLPC_GPIO_SMB_CLK geode_gpio(14) -#define OLPC_GPIO_SMB_DATA geode_gpio(15) +#define OLPC_GPIO_DCON_LOAD 11 +#define OLPC_GPIO_DCON_BLANK 12 +#define OLPC_GPIO_SMB_CLK 14 +#define OLPC_GPIO_SMB_DATA 15 #define OLPC_GPIO_WORKAUX geode_gpio(24) #define OLPC_GPIO_LID geode_gpio(26) #define OLPC_GPIO_ECSCI geode_gpio(27) diff --git a/drivers/staging/olpc_dcon/TODO b/drivers/staging/olpc_dcon/TODO index ac2d3d023715..35f9cda7be11 100644 --- a/drivers/staging/olpc_dcon/TODO +++ b/drivers/staging/olpc_dcon/TODO @@ -1,6 +1,5 @@ TODO: - checkpatch.pl cleanups - - port geode gpio calls to newer cs5535 API - see if vx855 gpio API can be made similar enough to cs5535 so we can share more code - allow simultaneous XO-1 and XO-1.5 support diff --git a/drivers/staging/olpc_dcon/olpc_dcon.c b/drivers/staging/olpc_dcon/olpc_dcon.c index 4ca45ec7fd84..da040c12fbf9 100644 --- a/drivers/staging/olpc_dcon/olpc_dcon.c +++ b/drivers/staging/olpc_dcon/olpc_dcon.c @@ -27,7 +27,6 @@ #include <asm/uaccess.h> #include <linux/ctype.h> #include <linux/reboot.h> -#include <linux/gpio.h> #include <asm/tsc.h> #include <asm/olpc.h> @@ -49,7 +48,7 @@ struct dcon_platform_data { int (*init)(void); void (*bus_stabilize_wiggle)(void); void (*set_dconload)(int); - int (*read_status)(void); + u8 (*read_status)(void); }; static struct dcon_platform_data *pdata; diff --git a/drivers/staging/olpc_dcon/olpc_dcon.h b/drivers/staging/olpc_dcon/olpc_dcon.h index 6453ca4ba0ee..e566d213da2a 100644 --- a/drivers/staging/olpc_dcon/olpc_dcon.h +++ b/drivers/staging/olpc_dcon/olpc_dcon.h @@ -29,26 +29,6 @@ #define DCON_REG_SCAN_INT 9 #define DCON_REG_BRIGHT 10 -/* GPIO registers (CS5536) */ - -#define MSR_LBAR_GPIO 0x5140000C - -#define GPIOx_OUT_VAL 0x00 -#define GPIOx_OUT_EN 0x04 -#define GPIOx_IN_EN 0x20 -#define GPIOx_INV_EN 0x24 -#define GPIOx_IN_FLTR_EN 0x28 -#define GPIOx_EVNTCNT_EN 0x2C -#define GPIOx_READ_BACK 0x30 -#define GPIOx_EVNT_EN 0x38 -#define GPIOx_NEGEDGE_EN 0x44 -#define GPIOx_NEGEDGE_STS 0x4C -#define GPIO_FLT7_AMNT 0xD8 -#define GPIO_MAP_X 0xE0 -#define GPIO_MAP_Y 0xE4 -#define GPIO_FE7_SEL 0xF7 - - /* Status values */ #define DCONSTAT_SCANINT 0 diff --git a/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c b/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c index 779fb7d7b30c..043198dc6ff7 100644 --- a/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c +++ b/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c @@ -10,54 +10,70 @@ * modify it under the terms of version 2 of the GNU General Public * License as published by the Free Software Foundation. */ - +#include <linux/cs5535.h> +#include <linux/gpio.h> #include <asm/olpc.h> #include "olpc_dcon.h" -/* Base address of the GPIO registers */ -static unsigned long gpio_base; - -/* - * List of GPIOs that we care about: - * (in) GPIO12 -- DCONBLANK - * (in) GPIO[56] -- DCONSTAT[01] - * (out) GPIO11 -- DCONLOAD - */ - -#define IN_GPIOS ((1<<5) | (1<<6) | (1<<7) | (1<<12)) -#define OUT_GPIOS (1<<11) - static int dcon_init_xo_1(void) { - unsigned long lo, hi; unsigned char lob; - rdmsr(MSR_LBAR_GPIO, lo, hi); - - /* Check the mask and whether GPIO is enabled (sanity check) */ - if (hi != 0x0000f001) { - printk(KERN_ERR "GPIO not enabled -- cannot use DCON\n"); - return -ENODEV; + if (gpio_request(OLPC_GPIO_DCON_STAT0, "OLPC-DCON")) { + printk(KERN_ERR "olpc-dcon: failed to request STAT0 GPIO\n"); + return -EIO; + } + if (gpio_request(OLPC_GPIO_DCON_STAT1, "OLPC-DCON")) { + printk(KERN_ERR "olpc-dcon: failed to request STAT1 GPIO\n"); + goto err_gp_stat1; + } + if (gpio_request(OLPC_GPIO_DCON_IRQ, "OLPC-DCON")) { + printk(KERN_ERR "olpc-dcon: failed to request IRQ GPIO\n"); + goto err_gp_irq; + } + if (gpio_request(OLPC_GPIO_DCON_LOAD, "OLPC-DCON")) { + printk(KERN_ERR "olpc-dcon: failed to request LOAD GPIO\n"); + goto err_gp_load; + } + if (gpio_request(OLPC_GPIO_DCON_BLANK, "OLPC-DCON")) { + printk(KERN_ERR "olpc-dcon: failed to request BLANK GPIO\n"); + goto err_gp_blank; } - - /* Mask off the IO base address */ - gpio_base = lo & 0x0000ff00; /* Turn off the event enable for GPIO7 just to be safe */ - outl(1 << (16+7), gpio_base + GPIOx_EVNT_EN); + cs5535_gpio_clear(OLPC_GPIO_DCON_IRQ, GPIO_EVENTS_ENABLE); + + /* + * Determine the current state by reading the GPIO bit; earlier + * stages of the boot process have established the state. + * + * Note that we read GPIO_OUPUT_VAL rather than GPIO_READ_BACK here; + * this is because OFW will disable input for the pin and set a value.. + * READ_BACK will only contain a valid value if input is enabled and + * then a value is set. So, future readings of the pin can use + * READ_BACK, but the first one cannot. Awesome, huh? + */ + dcon_source = cs5535_gpio_isset(OLPC_GPIO_DCON_LOAD, GPIO_OUTPUT_VAL) + ? DCON_SOURCE_CPU + : DCON_SOURCE_DCON; + dcon_pending = dcon_source; /* Set the directions for the GPIO pins */ - outl(OUT_GPIOS | (IN_GPIOS << 16), gpio_base + GPIOx_OUT_EN); - outl(IN_GPIOS | (OUT_GPIOS << 16), gpio_base + GPIOx_IN_EN); + gpio_direction_input(OLPC_GPIO_DCON_STAT0); + gpio_direction_input(OLPC_GPIO_DCON_STAT1); + gpio_direction_input(OLPC_GPIO_DCON_IRQ); + gpio_direction_input(OLPC_GPIO_DCON_BLANK); + gpio_direction_output(OLPC_GPIO_DCON_LOAD, + dcon_source == DCON_SOURCE_CPU); /* Set up the interrupt mappings */ /* Set the IRQ to pair 2 */ - geode_gpio_event_irq(OLPC_GPIO_DCON_IRQ, 2); + cs5535_gpio_setup_event(OLPC_GPIO_DCON_IRQ, 2, 0); /* Enable group 2 to trigger the DCON interrupt */ - geode_gpio_set_irq(2, DCON_IRQ); + cs5535_gpio_set_irq(2, DCON_IRQ); /* Select edge level for interrupt (in PIC) */ lob = inb(0x4d0); @@ -65,52 +81,61 @@ static int dcon_init_xo_1(void) outb(lob, 0x4d0); /* Register the interupt handler */ - if (request_irq(DCON_IRQ, &dcon_interrupt, 0, "DCON", &dcon_driver)) - return -EIO; + if (request_irq(DCON_IRQ, &dcon_interrupt, 0, "DCON", &dcon_driver)) { + printk(KERN_ERR "olpc-dcon: failed to request DCON's irq\n"); + goto err_req_irq; + } /* Clear INV_EN for GPIO7 (DCONIRQ) */ - outl((1<<(16+7)), gpio_base + GPIOx_INV_EN); + cs5535_gpio_clear(OLPC_GPIO_DCON_IRQ, GPIO_INPUT_INVERT); /* Enable filter for GPIO12 (DCONBLANK) */ - outl(1<<(12), gpio_base + GPIOx_IN_FLTR_EN); + cs5535_gpio_set(OLPC_GPIO_DCON_BLANK, GPIO_INPUT_FILTER); /* Disable filter for GPIO7 */ - outl(1<<(16+7), gpio_base + GPIOx_IN_FLTR_EN); + cs5535_gpio_clear(OLPC_GPIO_DCON_IRQ, GPIO_INPUT_FILTER); /* Disable event counter for GPIO7 (DCONIRQ) and GPIO12 (DCONBLANK) */ - - outl(1<<(16+7), gpio_base + GPIOx_EVNTCNT_EN); - outl(1<<(16+12), gpio_base + GPIOx_EVNTCNT_EN); + cs5535_gpio_clear(OLPC_GPIO_DCON_IRQ, GPIO_INPUT_EVENT_COUNT); + cs5535_gpio_clear(OLPC_GPIO_DCON_BLANK, GPIO_INPUT_EVENT_COUNT); /* Add GPIO12 to the Filter Event Pair #7 */ - outb(12, gpio_base + GPIO_FE7_SEL); + cs5535_gpio_set(OLPC_GPIO_DCON_BLANK, GPIO_FE7_SEL); /* Turn off negative Edge Enable for GPIO12 */ - outl(1<<(16+12), gpio_base + GPIOx_NEGEDGE_EN); + cs5535_gpio_clear(OLPC_GPIO_DCON_BLANK, GPIO_NEGATIVE_EDGE_EN); /* Enable negative Edge Enable for GPIO7 */ - outl(1<<7, gpio_base + GPIOx_NEGEDGE_EN); + cs5535_gpio_set(OLPC_GPIO_DCON_IRQ, GPIO_NEGATIVE_EDGE_EN); /* Zero the filter amount for Filter Event Pair #7 */ - outw(0, gpio_base + GPIO_FLT7_AMNT); + cs5535_gpio_set(0, GPIO_FLTR7_AMOUNT); /* Clear the negative edge status for GPIO7 and GPIO12 */ - outl((1<<7) | (1<<12), gpio_base+0x4c); + cs5535_gpio_set(OLPC_GPIO_DCON_IRQ, GPIO_NEGATIVE_EDGE_STS); + cs5535_gpio_set(OLPC_GPIO_DCON_BLANK, GPIO_NEGATIVE_EDGE_STS); /* FIXME: Clear the posiitive status as well, just to be sure */ - outl((1<<7) | (1<<12), gpio_base+0x48); + cs5535_gpio_set(OLPC_GPIO_DCON_IRQ, GPIO_POSITIVE_EDGE_STS); + cs5535_gpio_set(OLPC_GPIO_DCON_BLANK, GPIO_POSITIVE_EDGE_STS); /* Enable events for GPIO7 (DCONIRQ) and GPIO12 (DCONBLANK) */ - outl((1<<(7))|(1<<12), gpio_base + GPIOx_EVNT_EN); - - /* Determine the current state by reading the GPIO bit */ - /* Earlier stages of the boot process have established the state */ - dcon_source = inl(gpio_base + GPIOx_OUT_VAL) & (1<<11) - ? DCON_SOURCE_CPU - : DCON_SOURCE_DCON; - dcon_pending = dcon_source; + cs5535_gpio_set(OLPC_GPIO_DCON_IRQ, GPIO_EVENTS_ENABLE); + cs5535_gpio_set(OLPC_GPIO_DCON_BLANK, GPIO_EVENTS_ENABLE); return 0; + +err_req_irq: + gpio_free(OLPC_GPIO_DCON_BLANK); +err_gp_blank: + gpio_free(OLPC_GPIO_DCON_LOAD); +err_gp_load: + gpio_free(OLPC_GPIO_DCON_IRQ); +err_gp_irq: + gpio_free(OLPC_GPIO_DCON_STAT1); +err_gp_stat1: + gpio_free(OLPC_GPIO_DCON_STAT0); + return -EIO; } static void dcon_wiggle_xo_1(void) @@ -128,37 +153,44 @@ static void dcon_wiggle_xo_1(void) * simultaneously set AUX1 IN/OUT to GPIO14; ditto for SMB_DATA and * GPIO15. */ - geode_gpio_set(OLPC_GPIO_SMB_CLK|OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_VAL); - geode_gpio_set(OLPC_GPIO_SMB_CLK|OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_ENABLE); - geode_gpio_clear(OLPC_GPIO_SMB_CLK|OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_AUX1); - geode_gpio_clear(OLPC_GPIO_SMB_CLK|OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_AUX2); - geode_gpio_clear(OLPC_GPIO_SMB_CLK|OLPC_GPIO_SMB_DATA, GPIO_INPUT_AUX1); + cs5535_gpio_set(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_VAL); + cs5535_gpio_set(OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_VAL); + cs5535_gpio_set(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_ENABLE); + cs5535_gpio_set(OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_ENABLE); + cs5535_gpio_clear(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_AUX1); + cs5535_gpio_clear(OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_AUX1); + cs5535_gpio_clear(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_AUX2); + cs5535_gpio_clear(OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_AUX2); + cs5535_gpio_clear(OLPC_GPIO_SMB_CLK, GPIO_INPUT_AUX1); + cs5535_gpio_clear(OLPC_GPIO_SMB_DATA, GPIO_INPUT_AUX1); for (x = 0; x < 16; x++) { udelay(5); - geode_gpio_clear(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_VAL); + cs5535_gpio_clear(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_VAL); udelay(5); - geode_gpio_set(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_VAL); + cs5535_gpio_set(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_VAL); } udelay(5); - geode_gpio_set(OLPC_GPIO_SMB_CLK|OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_AUX1); - geode_gpio_set(OLPC_GPIO_SMB_CLK|OLPC_GPIO_SMB_DATA, GPIO_INPUT_AUX1); + cs5535_gpio_set(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_AUX1); + cs5535_gpio_set(OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_AUX1); + cs5535_gpio_set(OLPC_GPIO_SMB_CLK, GPIO_INPUT_AUX1); + cs5535_gpio_set(OLPC_GPIO_SMB_DATA, GPIO_INPUT_AUX1); } static void dcon_set_dconload_1(int val) { - if (val) - outl(1<<11, gpio_base + GPIOx_OUT_VAL); - else - outl(1<<(11 + 16), gpio_base + GPIOx_OUT_VAL); + gpio_set_value(OLPC_GPIO_DCON_LOAD, val); } -static int dcon_read_status_xo_1(void) +static u8 dcon_read_status_xo_1(void) { - int status = inl(gpio_base + GPIOx_READ_BACK) >> 5; - + u8 status; + + status = gpio_get_value(OLPC_GPIO_DCON_STAT0); + status |= gpio_get_value(OLPC_GPIO_DCON_STAT1) << 1; + /* Clear the negative edge status for GPIO7 */ - outl(1 << 7, gpio_base + GPIOx_NEGEDGE_STS); + cs5535_gpio_set(OLPC_GPIO_DCON_IRQ, GPIO_NEGATIVE_EDGE_STS); return status; } diff --git a/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c b/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c index cca6a235ef96..4f56098bb366 100644 --- a/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c +++ b/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c @@ -195,9 +195,9 @@ static void dcon_set_dconload_xo_1_5(int val) } } -static int dcon_read_status_xo_1_5(void) +static u8 dcon_read_status_xo_1_5(void) { - int status; + u8 status; if (!dcon_was_irq()) return -1; diff --git a/include/linux/cs5535.h b/include/linux/cs5535.h index 213cc50b5809..6fe2114f8ad2 100644 --- a/include/linux/cs5535.h +++ b/include/linux/cs5535.h @@ -103,11 +103,15 @@ static inline int cs5535_has_vsa2(void) #define GPIO_POSITIVE_EDGE_STS 0x48 #define GPIO_NEGATIVE_EDGE_STS 0x4C +#define GPIO_FLTR7_AMOUNT 0xD8 + #define GPIO_MAP_X 0xE0 #define GPIO_MAP_Y 0xE4 #define GPIO_MAP_Z 0xE8 #define GPIO_MAP_W 0xEC +#define GPIO_FE7_SEL 0xF7 + void cs5535_gpio_set(unsigned offset, unsigned int reg); void cs5535_gpio_clear(unsigned offset, unsigned int reg); int cs5535_gpio_isset(unsigned offset, unsigned int reg); |