diff options
| -rw-r--r-- | drivers/net/natsemi.c | 35 |
1 files changed, 12 insertions, 23 deletions
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c index 5dc41462fa01..5657049c2160 100644 --- a/drivers/net/natsemi.c +++ b/drivers/net/natsemi.c @@ -226,7 +226,6 @@ static int full_duplex[MAX_UNITS]; NATSEMI_PG1_NREGS) #define NATSEMI_REGS_VER 1 /* v1 added RFDR registers */ #define NATSEMI_REGS_SIZE (NATSEMI_NREGS * sizeof(u32)) -#define NATSEMI_DEF_EEPROM_SIZE 24 /* 12 16-bit values */ /* Buffer sizes: * The nic writes 32-bit values, even if the upper bytes of @@ -344,18 +343,6 @@ None characterised. -enum pcistuff { - PCI_USES_IO = 0x01, - PCI_USES_MEM = 0x02, - PCI_USES_MASTER = 0x04, - PCI_ADDR0 = 0x08, - PCI_ADDR1 = 0x10, -}; - -/* MMIO operations required */ -#define PCI_IOTYPE (PCI_USES_MASTER | PCI_USES_MEM | PCI_ADDR1) - - /* * Support for fibre connections on Am79C874: * This phy needs a special setup when connected to a fibre cable. @@ -363,22 +350,25 @@ enum pcistuff { */ #define PHYID_AM79C874 0x0022561b -#define MII_MCTRL 0x15 /* mode control register */ -#define MII_FX_SEL 0x0001 /* 100BASE-FX (fiber) */ -#define MII_EN_SCRM 0x0004 /* enable scrambler (tp) */ +enum { + MII_MCTRL = 0x15, /* mode control register */ + MII_FX_SEL = 0x0001, /* 100BASE-FX (fiber) */ + MII_EN_SCRM = 0x0004, /* enable scrambler (tp) */ +}; /* array of board data directly indexed by pci_tbl[x].driver_data */ static const struct { const char *name; unsigned long flags; + unsigned int eeprom_size; } natsemi_pci_info[] __devinitdata = { - { "NatSemi DP8381[56]", PCI_IOTYPE }, + { "NatSemi DP8381[56]", 0, 24 }, }; -static struct pci_device_id natsemi_pci_tbl[] = { - { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_83815, PCI_ANY_ID, PCI_ANY_ID, }, - { 0, }, +static const struct pci_device_id natsemi_pci_tbl[] __devinitdata = { + { PCI_VENDOR_ID_NS, 0x0020, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { } /* terminate list */ }; MODULE_DEVICE_TABLE(pci, natsemi_pci_tbl); @@ -888,8 +878,7 @@ static int __devinit natsemi_probe1 (struct pci_dev *pdev, iosize = pci_resource_len(pdev, pcibar); irq = pdev->irq; - if (natsemi_pci_info[chip_idx].flags & PCI_USES_MASTER) - pci_set_master(pdev); + pci_set_master(pdev); dev = alloc_etherdev(sizeof (struct netdev_private)); if (!dev) @@ -928,7 +917,7 @@ static int __devinit natsemi_probe1 (struct pci_dev *pdev, np->msg_enable = (debug >= 0) ? (1<<debug)-1 : NATSEMI_DEF_MSG; np->hands_off = 0; np->intr_status = 0; - np->eeprom_size = NATSEMI_DEF_EEPROM_SIZE; + np->eeprom_size = natsemi_pci_info[chip_idx].eeprom_size; /* Initial port: * - If the nic was configured to use an external phy and if find_mii |