diff options
49 files changed, 3133 insertions, 827 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-mtd b/Documentation/ABI/testing/sysfs-class-mtd new file mode 100644 index 000000000000..4d55a1888981 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-mtd @@ -0,0 +1,125 @@ +What: /sys/class/mtd/ +Date: April 2009 +KernelVersion: 2.6.29 +Contact: linux-mtd@lists.infradead.org +Description: + The mtd/ class subdirectory belongs to the MTD subsystem + (MTD core). + +What: /sys/class/mtd/mtdX/ +Date: April 2009 +KernelVersion: 2.6.29 +Contact: linux-mtd@lists.infradead.org +Description: + The /sys/class/mtd/mtd{0,1,2,3,...} directories correspond + to each /dev/mtdX character device. These may represent + physical/simulated flash devices, partitions on a flash + device, or concatenated flash devices. They exist regardless + of whether CONFIG_MTD_CHAR is actually enabled. + +What: /sys/class/mtd/mtdXro/ +Date: April 2009 +KernelVersion: 2.6.29 +Contact: linux-mtd@lists.infradead.org +Description: + These directories provide the corresponding read-only device + nodes for /sys/class/mtd/mtdX/ . They are only created + (for the benefit of udev) if CONFIG_MTD_CHAR is enabled. + +What: /sys/class/mtd/mtdX/dev +Date: April 2009 +KernelVersion: 2.6.29 +Contact: linux-mtd@lists.infradead.org +Description: + Major and minor numbers of the character device corresponding + to this MTD device (in <major>:<minor> format). This is the + read-write device so <minor> will be even. + +What: /sys/class/mtd/mtdXro/dev +Date: April 2009 +KernelVersion: 2.6.29 +Contact: linux-mtd@lists.infradead.org +Description: + Major and minor numbers of the character device corresponding + to the read-only variant of thie MTD device (in + <major>:<minor> format). In this case <minor> will be odd. + +What: /sys/class/mtd/mtdX/erasesize +Date: April 2009 +KernelVersion: 2.6.29 +Contact: linux-mtd@lists.infradead.org +Description: + "Major" erase size for the device. If numeraseregions is + zero, this is the eraseblock size for the entire device. + Otherwise, the MEMGETREGIONCOUNT/MEMGETREGIONINFO ioctls + can be used to determine the actual eraseblock layout. + +What: /sys/class/mtd/mtdX/flags +Date: April 2009 +KernelVersion: 2.6.29 +Contact: linux-mtd@lists.infradead.org +Description: + A hexadecimal value representing the device flags, ORed + together: + + 0x0400: MTD_WRITEABLE - device is writable + 0x0800: MTD_BIT_WRITEABLE - single bits can be flipped + 0x1000: MTD_NO_ERASE - no erase necessary + 0x2000: MTD_POWERUP_LOCK - always locked after reset + +What: /sys/class/mtd/mtdX/name +Date: April 2009 +KernelVersion: 2.6.29 +Contact: linux-mtd@lists.infradead.org +Description: + A human-readable ASCII name for the device or partition. + This will match the name in /proc/mtd . + +What: /sys/class/mtd/mtdX/numeraseregions +Date: April 2009 +KernelVersion: 2.6.29 +Contact: linux-mtd@lists.infradead.org +Description: + For devices that have variable eraseblock sizes, this + provides the total number of erase regions. Otherwise, + it will read back as zero. + +What: /sys/class/mtd/mtdX/oobsize +Date: April 2009 +KernelVersion: 2.6.29 +Contact: linux-mtd@lists.infradead.org +Description: + Number of OOB bytes per page. + +What: /sys/class/mtd/mtdX/size +Date: April 2009 +KernelVersion: 2.6.29 +Contact: linux-mtd@lists.infradead.org +Description: + Total size of the device/partition, in bytes. + +What: /sys/class/mtd/mtdX/type +Date: April 2009 +KernelVersion: 2.6.29 +Contact: linux-mtd@lists.infradead.org +Description: + One of the following ASCII strings, representing the device + type: + + absent, ram, rom, nor, nand, dataflash, ubi, unknown + +What: /sys/class/mtd/mtdX/writesize +Date: April 2009 +KernelVersion: 2.6.29 +Contact: linux-mtd@lists.infradead.org +Description: + Minimal writable flash unit size. This will always be + a positive integer. + + In the case of NOR flash it is 1 (even though individual + bits can be cleared). + + In the case of NAND flash it is one NAND page (or a + half page, or a quarter page). + + In the case of ECC NOR, it is the ECC block size. diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 5092a2be83c5..54ebf100e4e0 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1431,6 +1431,16 @@ and is between 256 and 4096 characters. It is defined in the file mtdparts= [MTD] See drivers/mtd/cmdlinepart.c. + onenand.bdry= [HW,MTD] Flex-OneNAND Boundary Configuration + + Format: [die0_boundary][,die0_lock][,die1_boundary][,die1_lock] + + boundary - index of last SLC block on Flex-OneNAND. + The remaining blocks are configured as MLC blocks. + lock - Configure if Flex-OneNAND boundary should be locked. + Once locked, the boundary cannot be changed. + 1 indicates lock status, 0 indicates unlock status. + mtdset= [ARM] ARM/S3C2412 JIVE boot control diff --git a/MAINTAINERS b/MAINTAINERS index cf5a46ef6b3f..02f6f78b561f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3252,7 +3252,6 @@ W: http://www.linux-mtd.infradead.org/doc/jffs2.html S: Maintained F: fs/jffs2/ F: include/linux/jffs2.h -F: include/mtd/jffs2-user.h JOURNALLING LAYER FOR BLOCK DEVICES (JBD) P: Stephen Tweedie diff --git a/arch/arm/mach-davinci/include/mach/nand.h b/arch/arm/mach-davinci/include/mach/nand.h index aa482841270b..b520c4b5678a 100644 --- a/arch/arm/mach-davinci/include/mach/nand.h +++ b/arch/arm/mach-davinci/include/mach/nand.h @@ -68,10 +68,14 @@ struct davinci_nand_pdata { /* platform_data */ /* none == NAND_ECC_NONE (strongly *not* advised!!) * soft == NAND_ECC_SOFT - * 1-bit == NAND_ECC_HW - * 4-bit == NAND_ECC_HW_SYNDROME (not on all chips) + * else == NAND_ECC_HW, according to ecc_bits + * + * All DaVinci-family chips support 1-bit hardware ECC. + * Newer ones also support 4-bit ECC, but are awkward + * using it with large page chips. */ nand_ecc_modes_t ecc_mode; + u8 ecc_bits; /* e.g. NAND_BUSWIDTH_16 or NAND_USE_FLASH_BBT */ unsigned options; diff --git a/arch/arm/plat-s3c/include/plat/nand.h b/arch/arm/plat-s3c/include/plat/nand.h index f4dcd14af059..18f958801e64 100644 --- a/arch/arm/plat-s3c/include/plat/nand.h +++ b/arch/arm/plat-s3c/include/plat/nand.h @@ -10,19 +10,26 @@ * published by the Free Software Foundation. */ -/* struct s3c2410_nand_set +/** + * struct s3c2410_nand_set - define a set of one or more nand chips + * @disable_ecc: Entirely disable ECC - Dangerous + * @flash_bbt: Openmoko u-boot can create a Bad Block Table + * Setting this flag will allow the kernel to + * look for it at boot time and also skip the NAND + * scan. + * @nr_chips: Number of chips in this set + * @nr_partitions: Number of partitions pointed to by @partitions + * @name: Name of set (optional) + * @nr_map: Map for low-layer logical to physical chip numbers (option) + * @partitions: The mtd partition list * - * define an set of one or more nand chips registered with an unique mtd - * - * nr_chips = number of chips in this set - * nr_partitions = number of partitions pointed to be partitoons (or zero) - * name = name of set (optional) - * nr_map = map for low-layer logical to physical chip numbers (option) - * partitions = mtd partition list -*/ - + * define a set of one or more nand chips registered with an unique mtd. Also + * allows to pass flag to the underlying NAND layer. 'disable_ecc' will trigger + * a warning at boot time. + */ struct s3c2410_nand_set { - unsigned int disable_ecc : 1; + unsigned int disable_ecc:1; + unsigned int flash_bbt:1; int nr_chips; int nr_partitions; @@ -39,7 +46,7 @@ struct s3c2410_platform_nand { int twrph0; /* active time for nWE/nOE */ int twrph1; /* time for release CLE/ALE from nWE/nOE inactive */ - unsigned int ignore_unset_ecc : 1; + unsigned int ignore_unset_ecc:1; int nr_sets; struct s3c2410_nand_set *sets; diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c index c240454fd113..8664feebc93b 100644 --- a/drivers/mtd/chips/cfi_cmdset_0001.c +++ b/drivers/mtd/chips/cfi_cmdset_0001.c @@ -46,6 +46,7 @@ #define MANUFACTURER_INTEL 0x0089 #define I82802AB 0x00ad #define I82802AC 0x00ac +#define PF38F4476 0x881c #define MANUFACTURER_ST 0x0020 #define M50LPW080 0x002F #define M50FLW080A 0x0080 @@ -315,10 +316,20 @@ static struct cfi_fixup fixup_table[] = { { 0, 0, NULL, NULL } }; +static void cfi_fixup_major_minor(struct cfi_private *cfi, + struct cfi_pri_intelext *extp) +{ + if (cfi->mfr == MANUFACTURER_INTEL && + cfi->id == PF38F4476 && extp->MinorVersion == '3') + extp->MinorVersion = '1'; +} + static inline struct cfi_pri_intelext * read_pri_intelext(struct map_info *map, __u16 adr) { + struct cfi_private *cfi = map->fldrv_priv; struct cfi_pri_intelext *extp; + unsigned int extra_size = 0; unsigned int extp_size = sizeof(*extp); again: @@ -326,6 +337,8 @@ read_pri_intelext(struct map_info *map, __u16 adr) if (!extp) return NULL; + cfi_fixup_major_minor(cfi, extp); + if (extp->MajorVersion != '1' || (extp->MinorVersion < '0' || extp->MinorVersion > '5')) { printk(KERN_ERR " Unknown Intel/Sharp Extended Query " @@ -340,19 +353,24 @@ read_pri_intelext(struct map_info *map, __u16 adr) extp->BlkStatusRegMask = le16_to_cpu(extp->BlkStatusRegMask); extp->ProtRegAddr = le16_to_cpu(extp->ProtRegAddr); - if (extp->MajorVersion == '1' && extp->MinorVersion >= '3') { - unsigned int extra_size = 0; - int nb_parts, i; + if (extp->MinorVersion >= '0') { + extra_size = 0; /* Protection Register info */ extra_size += (extp->NumProtectionFields - 1) * sizeof(struct cfi_intelext_otpinfo); + } + if (extp->MinorVersion >= '1') { /* Burst Read info */ extra_size += 2; if (extp_size < sizeof(*extp) + extra_size) goto need_more; - extra_size += extp->extra[extra_size-1]; + extra_size += extp->extra[extra_size - 1]; + } + + if (extp->MinorVersion >= '3') { + int nb_parts, i; /* Number of hardware-partitions */ extra_size += 1; diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c index e824b9b9b056..ccc4cfc7e4b5 100644 --- a/drivers/mtd/chips/jedec_probe.c +++ b/drivers/mtd/chips/jedec_probe.c @@ -166,6 +166,7 @@ #define SST39LF040 0x00D7 #define SST39SF010A 0x00B5 #define SST39SF020A 0x00B6 +#define SST39SF040 0x00B7 #define SST49LF004B 0x0060 #define SST49LF040B 0x0050 #define SST49LF008A 0x005a @@ -1393,6 +1394,18 @@ static const struct amd_flash_info jedec_table[] = { } }, { .mfr_id = MANUFACTURER_SST, + .dev_id = SST39SF040, + .name = "SST 39SF040", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x5555_0x2AAA, + .dev_size = SIZE_512KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO(0x01000,128), + } + }, { + .mfr_id = MANUFACTURER_SST, .dev_id = SST49LF040B, .name = "SST 49LF040B", .devtypes = CFI_DEVICETYPE_X8, diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index cc6369ea67dd..59c46126a5ce 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -500,6 +500,9 @@ static struct flash_info __devinitdata m25p_data [] = { { "at26df161a", 0x1f4601, 0, 64 * 1024, 32, SECT_4K, }, { "at26df321", 0x1f4701, 0, 64 * 1024, 64, SECT_4K, }, + /* Macronix */ + { "mx25l12805d", 0xc22018, 0, 64 * 1024, 256, }, + /* Spansion -- single (large) sector size only, at least * for the chips listed here (without boot sectors). */ @@ -528,6 +531,7 @@ static struct flash_info __devinitdata m25p_data [] = { { "m25p64", 0x202017, 0, 64 * 1024, 128, }, { "m25p128", 0x202018, 0, 256 * 1024, 64, }, + { "m45pe10", 0x204011, 0, 64 * 1024, 2, }, { "m45pe80", 0x204014, 0, 64 * 1024, 16, }, { "m45pe16", 0x204015, 0, 64 * 1024, 32, }, diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 82923bd2d9c5..0b98654d8eed 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -105,15 +105,6 @@ config MSP_FLASH_MAP_LIMIT default "0x02000000" depends on MSP_FLASH_MAP_LIMIT_32M -config MTD_PMC_MSP_RAMROOT - tristate "Embedded RAM block device for root on PMC-Sierra MSP" - depends on PMC_MSP_EMBEDDED_ROOTFS && \ - (MTD_BLOCK || MTD_BLOCK_RO) && \ - MTD_RAM - help - This provides support for the embedded root file system - on PMC MSP devices. This memory is mapped as a MTD block device. - config MTD_SUN_UFLASH tristate "Sun Microsystems userflash support" depends on SPARC && MTD_CFI && PCI @@ -270,7 +261,7 @@ config MTD_ALCHEMY config MTD_DILNETPC tristate "CFI Flash device mapped on DIL/Net PC" - depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT + depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN help MTD map driver for SSV DIL/Net PC Boards "DNP" and "ADNP". For details, see <http://www.ssv-embedded.de/ssv/pc104/p169.htm> @@ -501,7 +492,7 @@ config MTD_BFIN_ASYNC If compiled as a module, it will be called bfin-async-flash. config MTD_UCLINUX - tristate "Generic uClinux RAM/ROM filesystem support" + bool "Generic uClinux RAM/ROM filesystem support" depends on MTD_PARTITIONS && MTD_RAM && !MMU help Map driver to support image based filesystems for uClinux. diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index 2dbc1bec8488..8bae7f9850c0 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -25,7 +25,6 @@ obj-$(CONFIG_MTD_OCTAGON) += octagon-5066.o obj-$(CONFIG_MTD_PHYSMAP) += physmap.o obj-$(CONFIG_MTD_PHYSMAP_OF) += physmap_of.o obj-$(CONFIG_MTD_PMC_MSP_EVM) += pmcmsp-flash.o -obj-$(CONFIG_MTD_PMC_MSP_RAMROOT)+= pmcmsp-ramroot.o obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o obj-$(CONFIG_MTD_RPXLITE) += rpxlite.o obj-$(CONFIG_MTD_TQM8XXL) += tqm8xxl.o diff --git a/drivers/mtd/maps/bfin-async-flash.c b/drivers/mtd/maps/bfin-async-flash.c index 576611f605db..365c77b1b871 100644 --- a/drivers/mtd/maps/bfin-async-flash.c +++ b/drivers/mtd/maps/bfin-async-flash.c @@ -40,6 +40,9 @@ struct async_state { uint32_t flash_ambctl0, flash_ambctl1; uint32_t save_ambctl0, save_ambctl1; unsigned long irq_flags; +#ifdef CONFIG_MTD_PARTITIONS + struct mtd_partition *parts; +#endif }; static void switch_to_flash(struct async_state *state) @@ -170,6 +173,7 @@ static int __devinit bfin_flash_probe(struct platform_device *pdev) if (ret > 0) { pr_devinit(KERN_NOTICE DRIVER_NAME ": Using commandline partition definition\n"); add_mtd_partitions(state->mtd, pdata->parts, ret); + state->parts = pdata->parts; } else if (pdata->nr_parts) { pr_devinit(KERN_NOTICE DRIVER_NAME ": Using board partition definition\n"); @@ -193,6 +197,7 @@ static int __devexit bfin_flash_remove(struct platform_device *pdev) gpio_free(state->enet_flash_pin); #ifdef CONFIG_MTD_PARTITIONS del_mtd_partitions(state->mtd); + kfree(state->parts); #endif map_destroy(state->mtd); kfree(state); diff --git a/drivers/mtd/maps/integrator-flash.c b/drivers/mtd/maps/integrator-flash.c index c9681a339a59..b08a798ee254 100644 --- a/drivers/mtd/maps/integrator-flash.c +++ b/drivers/mtd/maps/integrator-flash.c @@ -36,27 +36,33 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/map.h> #include <linux/mtd/partitions.h> +#include <linux/mtd/concat.h> #include <asm/mach/flash.h> #include <mach/hardware.h> #include <asm/system.h> -#ifdef CONFIG_ARCH_P720T -#define FLASH_BASE (0x04000000) -#define FLASH_SIZE (64*1024*1024) -#endif +#define SUBDEV_NAME_SIZE (BUS_ID_SIZE + 2) -struct armflash_info { +struct armflash_subdev_info { + char name[SUBDEV_NAME_SIZE]; + struct mtd_info *mtd; + struct map_info map; struct flash_platform_data *plat; +}; + +struct armflash_info { struct resource *res; struct mtd_partition *parts; struct mtd_info *mtd; - struct map_info map; + int nr_subdev; + struct armflash_subdev_info subdev[0]; }; static void armflash_set_vpp(struct map_info *map, int on) { - struct armflash_info *info = container_of(map, struct armflash_info, map); + struct armflash_subdev_info *info = + container_of(map, struct armflash_subdev_info, map); if (info->plat && info->plat->set_vpp) info->plat->set_vpp(on); @@ -64,32 +70,17 @@ static void armflash_set_vpp(struct map_info *map, int on) static const char *probes[] = { "cmdlinepart", "RedBoot", "afs", NULL }; -static int armflash_probe(struct platform_device *dev) +static int armflash_subdev_probe(struct armflash_subdev_info *subdev, + struct resource *res) { - struct flash_platform_data *plat = dev->dev.platform_data; - struct resource *res = dev->resource; - unsigned int size = res->end - res->start + 1; - struct armflash_info *info; - int err; + struct flash_platform_data *plat = subdev->plat; + resource_size_t size = res->end - res->start + 1; void __iomem *base; + int err = 0; - info = kzalloc(sizeof(struct armflash_info), GFP_KERNEL); - if (!info) { - err = -ENOMEM; - goto out; - } - - info->plat = plat; - if (plat && plat->init) { - err = plat->init(); - if (err) - goto no_resource; - } - - info->res = request_mem_region(res->start, size, "armflash"); - if (!info->res) { + if (!request_mem_region(res->start, size, subdev->name)) { err = -EBUSY; - goto no_resource; + goto out; } base = ioremap(res->start, size); @@ -101,27 +92,132 @@ static int armflash_probe(struct platform_device *dev) /* * look for CFI based flash parts fitted to this board */ - info->map.size = size; - info->map.bankwidth = plat->width; - info->map.phys = res->start; - info->map.virt = base; - info->map.name = dev_name(&dev->dev); - info->map.set_vpp = armflash_set_vpp; + subdev->map.size = size; + subdev->map.bankwidth = plat->width; + subdev->map.phys = res->start; + subdev->map.virt = base; + subdev->map.name = subdev->name; + subdev->map.set_vpp = armflash_set_vpp; - simple_map_init(&info->map); + simple_map_init(&subdev->map); /* * Also, the CFI layer automatically works out what size * of chips we have, and does the necessary identification * for us automatically. */ - info->mtd = do_map_probe(plat->map_name, &info->map); - if (!info->mtd) { + subdev->mtd = do_map_probe(plat->map_name, &subdev->map); + if (!subdev->mtd) { err = -ENXIO; goto no_device; } - info->mtd->owner = THIS_MODULE; + subdev->mtd->owner = THIS_MODULE; + + /* Successful? */ + if (err == 0) + return err; + + if (subdev->mtd) + map_destroy(subdev->mtd); + no_device: + iounmap(base); + no_mem: + release_mem_region(res->start, size); + out: + return err; +} + +static void armflash_subdev_remove(struct armflash_subdev_info *subdev) +{ + if (subdev->mtd) + map_destroy(subdev->mtd); + if (subdev->map.virt) + iounmap(subdev->map.virt); + release_mem_region(subdev->map.phys, subdev->map.size); +} + +static int armflash_probe(struct platform_device *dev) +{ + struct flash_platform_data *plat = dev->dev.platform_data; + unsigned int size; + struct armflash_info *info; + int i, nr, err; + + /* Count the number of devices */ + for (nr = 0; ; nr++) + if (!platform_get_resource(dev, IORESOURCE_MEM, nr)) + break; + if (nr == 0) { + err = -ENODEV; + goto out; + } + + size = sizeof(struct armflash_info) + + sizeof(struct armflash_subdev_info) * nr; + info = kzalloc(size, GFP_KERNEL); + if (!info) { + err = -ENOMEM; + goto out; + } + + if (plat && plat->init) { + err = plat->init(); + if (err) + goto no_resource; + } + + for (i = 0; i < nr; i++) { + struct armflash_subdev_info *subdev = &info->subdev[i]; + struct resource *res; + + res = platform_get_resource(dev, IORESOURCE_MEM, i); + if (!res) + break; + + if (nr == 1) + /* No MTD concatenation, just use the default name */ + snprintf(subdev->name, SUBDEV_NAME_SIZE, "%s", + dev_name(&dev->dev)); + else + snprintf(subdev->name, SUBDEV_NAME_SIZE, "%s-%d", + dev_name(&dev->dev), i); + subdev->plat = plat; + + err = armflash_subdev_probe(subdev, res); + if (err) + break; + } + info->nr_subdev = i; + + if (err) + goto subdev_err; + + if (info->nr_subdev == 1) + info->mtd = info->subdev[0].mtd; + else if (info->nr_subdev > 1) { +#ifdef CONFIG_MTD_CONCAT + struct mtd_info *cdev[info->nr_subdev]; + + /* + * We detected multiple devices. Concatenate them together. + */ + for (i = 0; i < info->nr_subdev; i++) + cdev[i] = info->subdev[i].mtd; + + info->mtd = mtd_concat_create(cdev, info->nr_subdev, + dev_name(&dev->dev)); + if (info->mtd == NULL) + err = -ENXIO; +#else + printk(KERN_ERR "armflash: multiple devices found but " + "MTD concat support disabled.\n"); + err = -ENXIO; +#endif + } + + if (err < 0) + goto cleanup; err = parse_mtd_partitions(info->mtd, probes, &info->parts, 0); if (err > 0) { @@ -131,28 +227,30 @@ static int armflash_probe(struct platform_device *dev) "mtd partition registration failed: %d\n", err); } - if (err == 0) + if (err == 0) { platform_set_drvdata(dev, info); + return err; + } /* - * If we got an error, free all resources. + * We got an error, free all resources. */ - if (err < 0) { - if (info->mtd) { - del_mtd_partitions(info->mtd); - map_destroy(info->mtd); - } - kfree(info->parts); - - no_device: - iounmap(base); - no_mem: - release_mem_region(res->start, size); - no_resource: - if (plat && plat->exit) - plat->exit(); - kfree(info); + cleanup: + if (info->mtd) { + del_mtd_partitions(info->mtd); +#ifdef CONFIG_MTD_CONCAT + if (info->mtd != info->subdev[0].mtd) + mtd_concat_destroy(info->mtd); +#endif } + kfree(info->parts); + subdev_err: + for (i = info->nr_subdev - 1; i >= 0; i--) + armflash_subdev_remove(&info->subdev[i]); + no_resource: + if (plat && plat->exit) + plat->exit(); + kfree(info); out: return err; } @@ -160,22 +258,26 @@ static int armflash_probe(struct platform_device *dev) static int armflash_remove(struct platform_device *dev) { struct armflash_info *info = platform_get_drvdata(dev); + struct flash_platform_data *plat = dev->dev.platform_data; + int i; platform_set_drvdata(dev, NULL); if (info) { if (info->mtd) { del_mtd_partitions(info->mtd); - map_destroy(info->mtd); +#ifdef CONFIG_MTD_CONCAT + if (info->mtd != info->subdev[0].mtd) + mtd_concat_destroy(info->mtd); +#endif } kfree(info->parts); - iounmap(info->map.virt); - release_resource(info->res); - kfree(info->res); + for (i = info->nr_subdev - 1; i >= 0; i--) + armflash_subdev_remove(&info->subdev[i]); - if (info->plat && info->plat->exit) - info->plat->exit(); + if (plat && plat->exit) + plat->exit(); kfree(info); } diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c index 29a901157352..380648e9051a 100644 --- a/drivers/mtd/maps/physmap.c +++ b/drivers/mtd/maps/physmap.c @@ -195,42 +195,6 @@ err_out: } #ifdef CONFIG_PM -static int physmap_flash_suspend(struct platform_device *dev, pm_message_t state) -{ - struct physmap_flash_info *info = platform_get_drvdata(dev); - int ret = 0; - int i; - - for (i = 0; i < MAX_RESOURCES && info->mtd[i]; i++) - if (info->mtd[i]->suspend) { - ret = info->mtd[i]->suspend(info->mtd[i]); - if (ret) - goto fail; - } - - return 0; -fail: - for (--i; i >= 0; --i) - if (info->mtd[i]->suspend) { - BUG_ON(!info->mtd[i]->resume); - info->mtd[i]->resume(info->mtd[i]); - } - - return ret; -} - -static int physmap_flash_resume(struct platform_device *dev) -{ - struct physmap_flash_info *info = platform_get_drvdata(dev); - int i; - - for (i = 0; i < MAX_RESOURCES && info->mtd[i]; i++) - if (info->mtd[i]->resume) - info->mtd[i]->resume(info->mtd[i]); - - return 0; -} - static void physmap_flash_shutdown(struct platform_device *dev) { struct physmap_flash_info *info = platform_get_drvdata(dev); @@ -242,16 +206,12 @@ static void physmap_flash_shutdown(struct platform_device *dev) info->mtd[i]->resume(info->mtd[i]); } #else -#define physmap_flash_suspend NULL -#define physmap_flash_resume NULL #define physmap_flash_shutdown NULL #endif static struct platform_driver physmap_flash_driver = { .probe = physmap_flash_probe, .remove = physmap_flash_remove, - .suspend = physmap_flash_suspend, - .resume = physmap_flash_resume, .shutdown = physmap_flash_shutdown, .driver = { .name = "physmap-flash", diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c index c83a60fada53..39d357b2eb47 100644 --- a/drivers/mtd/maps/physmap_of.c +++ b/drivers/mtd/maps/physmap_of.c @@ -20,16 +20,23 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/map.h> #include <linux/mtd/partitions.h> +#include <linux/mtd/concat.h> #include <linux/of.h> #include <linux/of_platform.h> +struct of_flash_list { + struct mtd_info *mtd; + struct map_info map; + struct resource *res; +}; + struct of_flash { - struct mtd_info *mtd; - struct map_info map; - struct resource *res; + struct mtd_info *cmtd; #ifdef CONFIG_MTD_PARTITIONS struct mtd_partition *parts; #endif + int list_size; /* number of elements in of_flash_list */ + struct of_flash_list list[0]; }; #ifdef CONFIG_MTD_PARTITIONS @@ -88,30 +95,44 @@ static int parse_obsolete_partitions(struct of_device *dev, static int of_flash_remove(struct of_device *dev) { struct of_flash *info; + int i; info = dev_get_drvdata(&dev->dev); if (!info) return 0; dev_set_drvdata(&dev->dev, NULL); - if (info->mtd) { +#ifdef CONFIG_MTD_CONCAT + if (info->cmtd != info->list[0].mtd) { + del_mtd_device(info->cmtd); + mtd_concat_destroy(info->cmtd); + } +#endif + + if (info->cmtd) { if (OF_FLASH_PARTS(info)) { - del_mtd_partitions(info->mtd); + del_mtd_partitions(info->cmtd); kfree(OF_FLASH_PARTS(info)); } else { - del_mtd_device(info->mtd); + del_mtd_device(info->cmtd); } - map_destroy(info->mtd); } - if (info->map.virt) - iounmap(info->map.virt); + for (i = 0; i < info->list_size; i++) { + if (info->list[i].mtd) + map_destroy(info->list[i].mtd); - if (info->res) { - release_resource(info->res); - kfree(info->res); + if (info->list[i].map.virt) + iounmap(info->list[i].map.virt); + + if (info->list[i].res) { + release_resource(info->list[i].res); + kfree(info->list[i].res); + } } + kfree(info); + return 0; } @@ -164,68 +185,130 @@ static int __devinit of_flash_probe(struct of_device *dev, const char *probe_type = match->data; const u32 *width; int err; - - err = -ENXIO; - if (of_address_to_resource(dp, 0, &res)) { - dev_err(&dev->dev, "Can't get IO address from device tree\n"); + int i; + int count; + const u32 *p; + int reg_tuple_size; + struct mtd_info **mtd_list = NULL; + + reg_tuple_size = (of_n_addr_cells(dp) + of_n_size_cells(dp)) * sizeof(u32); + + /* + * Get number of "reg" tuples. Scan for MTD devices on area's + * described by each "reg" region. This makes it possible (including + * the concat support) to support the Intel P30 48F4400 chips which + * consists internally of 2 non-identical NOR chips on one die. + */ + p = of_get_property(dp, "reg", &count); + if (count % reg_tuple_size != 0) { + dev_err(&dev->dev, "Malformed reg property on %s\n", + dev->node->full_name); + err = -EINVAL; goto err_out; } - - dev_dbg(&dev->dev, "of_flash device: %.8llx-%.8llx\n", - (unsigned long long)res.start, (unsigned long long)res.end); + count /= reg_tuple_size; err = -ENOMEM; - info = kzalloc(sizeof(*info), GFP_KERNEL); + info = kzalloc(sizeof(struct of_flash) + + sizeof(struct of_flash_list) * count, GFP_KERNEL); + if (!info) + goto err_out; + + mtd_list = kzalloc(sizeof(struct mtd_info) * count, GFP_KERNEL); if (!info) goto err_out; dev_set_drvdata(&dev->dev, info); - err = -EBUSY; - info->res = request_mem_region(res.start, res.end - res.start + 1, - dev_name(&dev->dev)); - if (!info->res) - goto err_out; + for (i = 0; i < count; i++) { + err = -ENXIO; + if (of_address_to_resource(dp, i, &res)) { + dev_err(&dev->dev, "Can't get IO address from device" + " tree\n"); + goto err_out; + } - err = -ENXIO; - width = of_get_property(dp, "bank-width", NULL); - if (!width) { - dev_err(&dev->dev, "Can't get bank width from device tree\n"); - goto err_out; - } + dev_dbg(&dev->dev, "of_flash device: %.8llx-%.8llx\n", + (unsigned long long)res.start, + (unsigned long long)res.end); + + err = -EBUSY; + info->list[i].res = request_mem_region(res.start, res.end - + res.start + 1, + dev_name(&dev->dev)); + if (!info->list[i].res) + goto err_out; + + err = -ENXIO; + width = of_get_property(dp, "bank-width", NULL); + if (!width) { + dev_err(&dev->dev, "Can't get bank width from device" + " tree\n"); + goto err_out; + } - info->map.name = dev_name(&dev->dev); - info->map.phys = res.start; - info->map.size = res.end - res.start + 1; - info->map.bankwidth = *width; + info->list[i].map.name = dev_name(&dev->dev); + info->list[i].map.phys = res.start; + info->list[i].map.size = res.end - res.start + 1; + info->list[i].map.bankwidth = *width; + + err = -ENOMEM; + info->list[i].map.virt = ioremap(info->list[i].map.phys, + info->list[i].map.size); + if (!info->list[i].map.virt) { + dev_err(&dev->dev, "Failed to ioremap() flash" + " region\n"); + goto err_out; + } - err = -ENOMEM; - info->map.virt = ioremap(info->map.phys, info->map.size); - if (!info->map.virt) { - dev_err(&dev->dev, "Failed to ioremap() flash region\n"); - goto err_out; - } + simple_map_init(&info->list[i].map); - simple_map_init(&info->map); + if (probe_type) { + info->list[i].mtd = do_map_probe(probe_type, + &info->list[i].map); + } else { + info->list[i].mtd = obsolete_probe(dev, + &info->list[i].map); + } + mtd_list[i] = info->list[i].mtd; - if (probe_type) - info->mtd = do_map_probe(probe_type, &info->map); - else - info->mtd = obsolete_probe(dev, &info->map); + err = -ENXIO; + if (!info->list[i].mtd) { + dev_err(&dev->dev, "do_map_probe() failed\n"); + goto err_out; + } else { + info->list_size++; + } + info->list[i].mtd->owner = THIS_MODULE; + info->list[i].mtd->dev.parent = &dev->dev; + } - err = -ENXIO; - if (!info->mtd) { - dev_err(&dev->dev, "do_map_probe() failed\n"); - goto err_out; + err = 0; + if (info->list_size == 1) { + info->cmtd = info->list[0].mtd; + } else if (info->list_size > 1) { + /* + * We detected multiple devices. Concatenate them together. + */ +#ifdef CONFIG_MTD_CONCAT + info->cmtd = mtd_concat_create(mtd_list, info->list_size, + dev_name(&dev->dev)); + if (info->cmtd == NULL) + err = -ENXIO; +#else + printk(KERN_ERR "physmap_of: multiple devices " + "found but MTD concat support disabled.\n"); + err = -ENXIO; +#endif } - info->mtd->owner = THIS_MODULE; - info->mtd->dev.parent = &dev->dev; + if (err) + goto err_out; #ifdef CONFIG_MTD_PARTITIONS /* First look for RedBoot table or partitions on the command * line, these take precedence over device tree information */ - err = parse_mtd_partitions(info->mtd, part_probe_types, - &info->parts, 0); + err = parse_mtd_partitions(info->cmtd, part_probe_types, + &info->parts, 0); if (err < 0) return err; @@ -244,15 +327,19 @@ static int __devinit of_flash_probe(struct of_device *dev, } if (err > 0) - add_mtd_partitions(info->mtd, info->parts, err); + add_mtd_partitions(info->cmtd, info->parts, err); else #endif - add_mtd_device(info->mtd); + add_mtd_device(info->cmtd); + + kfree(mtd_list); return 0; err_out: + kfree(mtd_list); of_flash_remove(dev); + return err; } diff --git a/drivers/mtd/maps/pmcmsp-ramroot.c b/drivers/mtd/maps/pmcmsp-ramroot.c deleted file mode 100644 index 30de5c0c09a9..000000000000 --- a/drivers/mtd/maps/pmcmsp-ramroot.c +++ /dev/null @@ -1,104 +0,0 @@ -/* - * Mapping of the rootfs in a physical region of memory - * - * Copyright (C) 2005-2007 PMC-Sierra Inc. - * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/fs.h> -#include <linux/root_dev.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> - -#include <asm/io.h> - -#include <msp_prom.h> - -static struct mtd_info *rr_mtd; - -struct map_info rr_map = { - .name = "ramroot", - .bankwidth = 4, -}; - -static int __init init_rrmap(void) -{ - void *ramroot_start; - unsigned long ramroot_size; - - /* Check for supported rootfs types */ - if (get_ramroot(&ramroot_start, &ramroot_size)) { - rr_map.phys = CPHYSADDR(ramroot_start); - rr_map.size = ramroot_size; - - printk(KERN_NOTICE - "PMC embedded root device: 0x%08lx @ 0x%08lx\n", - rr_map.size, (unsigned long)rr_map.phys); - } else { - printk(KERN_ERR - "init_rrmap: no supported embedded rootfs detected!\n"); - return -ENXIO; - } - - /* Map rootfs to I/O space for block device driver */ - rr_map.virt = ioremap(rr_map.phys, rr_map.size); - if (!rr_map.virt) { - printk(KERN_ERR "Failed to ioremap\n"); - return -EIO; - } - - simple_map_init(&rr_map); - - rr_mtd = do_map_probe("map_ram", &rr_map); - if (rr_mtd) { - rr_mtd->owner = THIS_MODULE; - - add_mtd_device(rr_mtd); - - return 0; - } - - iounmap(rr_map.virt); - return -ENXIO; -} - -static void __exit cleanup_rrmap(void) -{ - del_mtd_device(rr_mtd); - map_destroy(rr_mtd); - - iounmap(rr_map.virt); - rr_map.virt = NULL; -} - -MODULE_AUTHOR("PMC-Sierra, Inc"); -MODULE_DESCRIPTION("MTD map driver for embedded PMC-Sierra MSP filesystem"); -MODULE_LICENSE("GPL"); - -module_init(init_rrmap); -module_exit(cleanup_rrmap); diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c index 572d32fdf38a..643aa06b599e 100644 --- a/drivers/mtd/maps/pxa2xx-flash.c +++ b/drivers/mtd/maps/pxa2xx-flash.c @@ -140,24 +140,6 @@ static int __devexit pxa2xx_flash_remove(struct platform_device *dev) } #ifdef CONFIG_PM -static int pxa2xx_flash_suspend(struct platform_device *dev, pm_message_t state) -{ - struct pxa2xx_flash_info *info = platform_get_drvdata(dev); - int ret = 0; - - if (info->mtd && info->mtd->suspend) - ret = info->mtd->suspend(info->mtd); - return ret; -} - -static int pxa2xx_flash_resume(struct platform_device *dev) -{ - struct pxa2xx_flash_info *info = platform_get_drvdata(dev); - - if (info->mtd && info->mtd->resume) - info->mtd->resume(info->mtd); - return 0; -} static void pxa2xx_flash_shutdown(struct platform_device *dev) { struct pxa2xx_flash_info *info = platform_get_drvdata(dev); @@ -166,8 +148,6 @@ static void pxa2xx_flash_shutdown(struct platform_device *dev) info->mtd->resume(info->mtd); } #else -#define pxa2xx_flash_suspend NULL -#define pxa2xx_flash_resume NULL #define pxa2xx_flash_shutdown NULL #endif @@ -178,8 +158,6 @@ static struct platform_driver pxa2xx_flash_driver = { }, .probe = pxa2xx_flash_probe, .remove = __devexit_p(pxa2xx_flash_remove), - .suspend = pxa2xx_flash_suspend, - .resume = pxa2xx_flash_resume, .shutdown = pxa2xx_flash_shutdown, }; diff --git a/drivers/mtd/maps/rbtx4939-flash.c b/drivers/mtd/maps/rbtx4939-flash.c index d39f0adac846..83ed64512c5e 100644 --- a/drivers/mtd/maps/rbtx4939-flash.c +++ b/drivers/mtd/maps/rbtx4939-flash.c @@ -145,25 +145,6 @@ err_out: } #ifdef CONFIG_PM -static int rbtx4939_flash_suspend(struct platform_device *dev, - pm_message_t state) -{ - struct rbtx4939_flash_info *info = platform_get_drvdata(dev); - - if (info->mtd->suspend) - return info->mtd->suspend(info->mtd); - return 0; -} - -static int rbtx4939_flash_resume(struct platform_device *dev) -{ - struct rbtx4939_flash_info *info = platform_get_drvdata(dev); - - if (info->mtd->resume) - info->mtd->resume(info->mtd); - return 0; -} - static void rbtx4939_flash_shutdown(struct platform_device *dev) { struct rbtx4939_flash_info *info = platform_get_drvdata(dev); @@ -173,16 +154,12 @@ static void rbtx4939_flash_shutdown(struct platform_device *dev) info->mtd->resume(info->mtd); } #else -#define rbtx4939_flash_suspend NULL -#define rbtx4939_flash_resume NULL #define rbtx4939_flash_shutdown NULL #endif static struct platform_driver rbtx4939_flash_driver = { .probe = rbtx4939_flash_probe, .remove = rbtx4939_flash_remove, - .suspend = rbtx4939_flash_suspend, - .resume = rbtx4939_flash_resume, .shutdown = rbtx4939_flash_shutdown, .driver = { .name = "rbtx4939-flash", diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c index 05e9362dc7f0..c6210f5118d1 100644 --- a/drivers/mtd/maps/sa1100-flash.c +++ b/drivers/mtd/maps/sa1100-flash.c @@ -415,25 +415,6 @@ static int __exit sa1100_mtd_remove(struct platform_device *pdev) } #ifdef CONFIG_PM -static int sa1100_mtd_suspend(struct platform_device *dev, pm_message_t state) -{ - struct sa_info *info = platform_get_drvdata(dev); - int ret = 0; - - if (info) - ret = info->mtd->suspend(info->mtd); - - return ret; -} - -static int sa1100_mtd_resume(struct platform_device *dev) -{ - struct sa_info *info = platform_get_drvdata(dev); - if (info) - info->mtd->resume(info->mtd); - return 0; -} - static void sa1100_mtd_shutdown(struct platform_device *dev) { struct sa_info *info = platform_get_drvdata(dev); @@ -441,16 +422,12 @@ static void sa1100_mtd_shutdown(struct platform_device *dev) info->mtd->resume(info->mtd); } #else -#define sa1100_mtd_suspend NULL -#define sa1100_mtd_resume NULL #define sa1100_mtd_shutdown NULL #endif static struct platform_driver sa1100_mtd_driver = { .probe = sa1100_mtd_probe, .remove = __exit_p(sa1100_mtd_remove), - .suspend = sa1100_mtd_suspend, - .resume = sa1100_mtd_resume, .shutdown = sa1100_mtd_shutdown, .driver = { .name = "sa1100-mtd", diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c index 81756e397711..d4314fb88212 100644 --- a/drivers/mtd/maps/uclinux.c +++ b/drivers/mtd/maps/uclinux.c @@ -22,15 +22,19 @@ /****************************************************************************/ +extern char _ebss; + struct map_info uclinux_ram_map = { .name = "RAM", + .phys = (unsigned long)&_ebss, + .size = 0, }; -struct mtd_info *uclinux_ram_mtdinfo; +static struct mtd_info *uclinux_ram_mtdinfo; /****************************************************************************/ -struct mtd_partition uclinux_romfs[] = { +static struct mtd_partition uclinux_romfs[] = { { .name = "ROMfs" } }; @@ -38,7 +42,7 @@ struct mtd_partition uclinux_romfs[] = { /****************************************************************************/ -int uclinux_point(struct mtd_info *mtd, loff_t from, size_t len, +static int uclinux_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, void **virt, resource_size_t *phys) { struct map_info *map = mtd->priv; @@ -55,12 +59,10 @@ static int __init uclinux_mtd_init(void) { struct mtd_info *mtd; struct map_info *mapp; - extern char _ebss; - unsigned long addr = (unsigned long) &_ebss; mapp = &uclinux_ram_map; - mapp->phys = addr; - mapp->size = PAGE_ALIGN(ntohl(*((unsigned long *)(addr + 8)))); + if (!mapp->size) + mapp->size = PAGE_ALIGN(ntohl(*((unsigned long *)(mapp->phys + 8)))); mapp->bankwidth = 4; printk("uclinux[mtd]: RAM probe address=0x%x size=0x%x\n", diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c index aaac3b6800b7..c3f62654b6df 100644 --- a/drivers/mtd/mtd_blkdevs.c +++ b/drivers/mtd/mtd_blkdevs.c @@ -291,7 +291,7 @@ int add_mtd_blktrans_dev(struct mtd_blktrans_dev *new) gd->private_data = new; new->blkcore_priv = gd; gd->queue = tr->blkcore_priv->rq; - gd->driverfs_dev = new->mtd->dev.parent; + gd->driverfs_dev = &new->mtd->dev; if (new->readonly) set_disk_ro(gd, 1); diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index 763d3f0a1f42..5b081cb84351 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c @@ -14,6 +14,7 @@ #include <linux/sched.h> #include <linux/smp_lock.h> #include <linux/backing-dev.h> +#include <linux/compat.h> #include <linux/mtd/mtd.h> #include <linux/mtd/compatmac.h> @@ -355,6 +356,100 @@ static int otp_select_filemode(struct mtd_file_info *mfi, int mode) # define otp_select_filemode(f,m) -EOPNOTSUPP #endif +static int mtd_do_writeoob(struct file *file, struct mtd_info *mtd, + uint64_t start, uint32_t length, void __user *ptr, + uint32_t __user *retp) +{ + struct mtd_oob_ops ops; + uint32_t retlen; + int ret = 0; + + if (!(file->f_mode & FMODE_WRITE)) + return -EPERM; + + if (length > 4096) + return -EINVAL; + + if (!mtd->write_oob) + ret = -EOPNOTSUPP; + else + ret = access_ok(VERIFY_READ, ptr, length) ? 0 : EFAULT; + + if (ret) + return ret; + + ops.ooblen = length; + ops.ooboffs = start & (mtd->oobsize - 1); + ops.datbuf = NULL; + ops.mode = MTD_OOB_PLACE; + + if (ops.ooboffs && ops.ooblen > (mtd->oobsize - ops.ooboffs)) + return -EINVAL; + + ops.oobbuf = kmalloc(length, GFP_KERNEL); + if (!ops.oobbuf) + return -ENOMEM; + + if (copy_from_user(ops.oobbuf, ptr, length)) { + kfree(ops.oobbuf); + return -EFAULT; + } + + start &= ~((uint64_t)mtd->oobsize - 1); + ret = mtd->write_oob(mtd, start, &ops); + + if (ops.oobretlen > 0xFFFFFFFFU) + ret = -EOVERFLOW; + retlen = ops.oobretlen; + if (copy_to_user(retp, &retlen, sizeof(length))) + ret = -EFAULT; + + kfree(ops.oobbuf); + return ret; +} + +static int mtd_do_readoob(struct mtd_info *mtd, uint64_t start, + uint32_t length, void __user *ptr, uint32_t __user *retp) +{ + struct mtd_oob_ops ops; + int ret = 0; + + if (length > 4096) + return -EINVAL; + + if (!mtd->read_oob) + ret = -EOPNOTSUPP; + else + ret = access_ok(VERIFY_WRITE, ptr, + length) ? 0 : -EFAULT; + if (ret) + return ret; + + ops.ooblen = length; + ops.ooboffs = start & (mtd->oobsize - 1); + ops.datbuf = NULL; + ops.mode = MTD_OOB_PLACE; + + if (ops.ooboffs && ops.ooblen > (mtd->oobsize - ops.ooboffs)) + return -EINVAL; + + ops.oobbuf = kmalloc(length, GFP_KERNEL); + if (!ops.oobbuf) + return -ENOMEM; + + start &= ~((uint64_t)mtd->oobsize - 1); + ret = mtd->read_oob(mtd, start, &ops); + + if (put_user(ops.oobretlen, retp)) + ret = -EFAULT; + else if (ops.oobretlen && copy_to_user(ptr, ops.oobbuf, + ops.oobretlen)) + ret = -EFAULT; + + kfree(ops.oobbuf); + return ret; +} + static int mtd_ioctl(struct inode *inode, struct file *file, u_int cmd, u_long arg) { @@ -417,6 +512,7 @@ static int mtd_ioctl(struct inode *inode, struct file *file, break; case MEMERASE: + case MEMERASE64: { struct erase_info *erase; @@ -427,20 +523,32 @@ static int mtd_ioctl(struct inode *inode, struct file *file, if (!erase) ret = -ENOMEM; else { - struct erase_info_user einfo; - wait_queue_head_t waitq; DECLARE_WAITQUEUE(wait, current); init_waitqueue_head(&waitq); - if (copy_from_user(&einfo, argp, - sizeof(struct erase_info_user))) { - kfree(erase); - return -EFAULT; + if (cmd == MEMERASE64) { + struct erase_info_user64 einfo64; + + if (copy_from_user(&einfo64, argp, + sizeof(struct erase_info_user64))) { + kfree(erase); + return -EFAULT; + } + erase->addr = einfo64.start; + erase->len = einfo64.length; + } else { + struct erase_info_user einfo32; + + if (copy_from_user(&einfo32, argp, + sizeof(struct erase_info_user))) { + kfree(erase); + return -EFAULT; + } + erase->addr = einfo32.start; + erase->len = einfo32.length; } - erase->addr = einfo.start; - erase->len = einfo.length; erase->mtd = mtd; erase->callback = mtdchar_erase_callback; erase->priv = (unsigned long)&waitq; @@ -474,100 +582,56 @@ static int mtd_ioctl(struct inode *inode, struct file *file, case MEMWRITEOOB: { struct mtd_oob_buf buf; - struct mtd_oob_ops ops; - struct mtd_oob_buf __user *user_buf = argp; - uint32_t retlen; - - if(!(file->f_mode & FMODE_WRITE)) - return -EPERM; - - if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf))) - return -EFAULT; - - if (buf.length > 4096) - return -EINVAL; - - if (!mtd->write_oob) - ret = -EOPNOTSUPP; - else - ret = access_ok(VERIFY_READ, buf.ptr, - buf.length) ? 0 : EFAULT; - - if (ret) - return ret; - - ops.ooblen = buf.length; - ops.ooboffs = buf.start & (mtd->oobsize - 1); - ops.datbuf = NULL; - ops.mode = MTD_OOB_PLACE; - - if (ops.ooboffs && ops.ooblen > (mtd->oobsize - ops.ooboffs)) - return -EINVAL; - - ops.oobbuf = kmalloc(buf.length, GFP_KERNEL); - if (!ops.oobbuf) - return -ENOMEM; - - if (copy_from_user(ops.oobbuf, buf.ptr, buf.length)) { - kfree(ops.oobbuf); - return -EFAULT; - } + struct mtd_oob_buf __user *buf_user = argp; - buf.start &= ~(mtd->oobsize - 1); - ret = mtd->write_oob(mtd, buf.start, &ops); - - if (ops.oobretlen > 0xFFFFFFFFU) - ret = -EOVERFLOW; - retlen = ops.oobretlen; - if (copy_to_user(&user_buf->length, &retlen, sizeof(buf.length))) + /* NOTE: writes return length to buf_user->length */ + if (copy_from_user(&buf, argp, sizeof(buf))) ret = -EFAULT; - - kfree(ops.oobbuf); + else + ret = mtd_do_writeoob(file, mtd, buf.start, buf.length, + buf.ptr, &buf_user->length); break; - } case MEMREADOOB: { struct mtd_oob_buf buf; - struct mtd_oob_ops ops; - - if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf))) - return -EFAULT; - - if (buf.length > 4096) - return -EINVAL; + struct mtd_oob_buf __user *buf_user = argp; - if (!mtd->read_oob) - ret = -EOPNOTSUPP; + /* NOTE: writes return length to buf_user->start */ + if (copy_from_user(&buf, argp, sizeof(buf))) + ret = -EFAULT; else - ret = access_ok(VERIFY_WRITE, buf.ptr, - buf.length) ? 0 : -EFAULT; - if (ret) - return ret; - - ops.ooblen = buf.length; - ops.ooboffs = buf.start & (mtd->oobsize - 1); - ops.datbuf = NULL; - ops.mode = MTD_OOB_PLACE; + ret = mtd_do_readoob(mtd, buf.start, buf.length, + buf.ptr, &buf_user->start); + break; + } - if (ops.ooboffs && ops.ooblen > (mtd->oobsize - ops.ooboffs)) - return -EINVAL; + case MEMWRITEOOB64: + { + struct mtd_oob_buf64 buf; + struct mtd_oob_buf64 __user *buf_user = argp; - ops.oobbuf = kmalloc(buf.length, GFP_KERNEL); - if (!ops.oobbuf) - return -ENOMEM; + if (copy_from_user(&buf, argp, sizeof(buf))) + ret = -EFAULT; + else + ret = mtd_do_writeoob(file, mtd, buf.start, buf.length, + (void __user *)(uintptr_t)buf.usr_ptr, + &buf_user->length); + break; + } - buf.start &= ~(mtd->oobsize - 1); - ret = mtd->read_oob(mtd, buf.start, &ops); + case MEMREADOOB64: + { + struct mtd_oob_buf64 buf; + struct mtd_oob_buf64 __user *buf_user = argp; - if (put_user(ops.oobretlen, (uint32_t __user *)argp)) - ret = -EFAULT; - else if (ops.oobretlen && copy_to_user(buf.ptr, ops.oobbuf, - ops.oobretlen)) + if (copy_from_user(&buf, argp, sizeof(buf))) ret = -EFAULT; - - kfree(ops.oobbuf); + else + ret = mtd_do_readoob(mtd, buf.start, buf.length, + (void __user *)(uintptr_t)buf.usr_ptr, + &buf_user->length); break; } @@ -758,6 +822,68 @@ static int mtd_ioctl(struct inode *inode, struct file *file, return ret; } /* memory_ioctl */ +#ifdef CONFIG_COMPAT + +struct mtd_oob_buf32 { + u_int32_t start; + u_int32_t length; + compat_caddr_t ptr; /* unsigned char* */ +}; + +#define MEMWRITEOOB32 _IOWR('M', 3, struct mtd_oob_buf32) +#define MEMREADOOB32 _IOWR('M', 4, struct mtd_oob_buf32) + +static long mtd_compat_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + struct inode *inode = file->f_path.dentry->d_inode; + struct mtd_file_info *mfi = file->private_data; + struct mtd_info *mtd = mfi->mtd; + void __user *argp = compat_ptr(arg); + int ret = 0; + + lock_kernel(); + + switch (cmd) { + case MEMWRITEOOB32: + { + struct mtd_oob_buf32 buf; + struct mtd_oob_buf32 __user *buf_user = argp; + + if (copy_from_user(&buf, argp, sizeof(buf))) + ret = -EFAULT; + else + ret = mtd_do_writeoob(file, mtd, buf.start, + buf.length, compat_ptr(buf.ptr), + &buf_user->length); + break; + } + + case MEMREADOOB32: + { + struct mtd_oob_buf32 buf; + struct mtd_oob_buf32 __user *buf_user = argp; + + /* NOTE: writes return length to buf->start */ + if (copy_from_user(&buf, argp, sizeof(buf))) + ret = -EFAULT; + else + ret = mtd_do_readoob(mtd, buf.start, + buf.length, compat_ptr(buf.ptr), + &buf_user->start); + break; + } + default: + ret = mtd_ioctl(inode, file, cmd, (unsigned long)argp); + } + + unlock_kernel(); + + return ret; +} + +#endif /* CONFIG_COMPAT */ + /* * try to determine where a shared mapping can be made * - only supported for NOMMU at the moment (MMU can't doesn't copy private @@ -817,6 +943,9 @@ static const struct file_operations mtd_fops = { .read = mtd_read, .write = mtd_write, .ioctl = mtd_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = mtd_compat_ioctl, +#endif .open = mtd_open, .release = mtd_close, .mmap = mtd_mmap, diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index bccb4b1ffc46..fac54a3fa3f1 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -23,8 +23,15 @@ #include "mtdcore.h" - -static struct class *mtd_class; +static int mtd_cls_suspend(struct device *dev, pm_message_t state); +static int mtd_cls_resume(struct device *dev); + +static struct class mtd_class = { + .name = "mtd", + .owner = THIS_MODULE, + .suspend = mtd_cls_suspend, + .resume = mtd_cls_resume, +}; /* These are exported solely for the purpose of mtd_blkdevs.c. You should not use them for _anything_ else */ @@ -52,7 +59,26 @@ static void mtd_release(struct device *dev) /* remove /dev/mtdXro node if needed */ if (index) - device_destroy(mtd_class, index + 1); + device_destroy(&mtd_class, index + 1); +} + +static int mtd_cls_suspend(struct device *dev, pm_message_t state) +{ + struct mtd_info *mtd = dev_to_mtd(dev); + + if (mtd->suspend) + return mtd->suspend(mtd); + else + return 0; +} + +static int mtd_cls_resume(struct device *dev) +{ + struct mtd_info *mtd = dev_to_mtd(dev); + + if (mtd->resume) + mtd->resume(mtd); + return 0; } static ssize_t mtd_type_show(struct device *dev, @@ -269,7 +295,7 @@ int add_mtd_device(struct mtd_info *mtd) * physical device. */ mtd->dev.type = &mtd_devtype; - mtd->dev.class = mtd_class; + mtd->dev.class = &mtd_class; mtd->dev.devt = MTD_DEVT(i); dev_set_name(&mtd->dev, "mtd%d", i); if (device_register(&mtd->dev) != 0) { @@ -278,7 +304,7 @@ int add_mtd_device(struct mtd_info *mtd) } if (MTD_DEVT(i)) - device_create(mtd_class, mtd->dev.parent, + device_create(&mtd_class, mtd->dev.parent, MTD_DEVT(i) + 1, NULL, "mtd%dro", i); @@ -604,11 +630,12 @@ done: static int __init init_mtd(void) { - mtd_class = class_create(THIS_MODULE, "mtd"); + int ret; + ret = class_register(&mtd_class); - if (IS_ERR(mtd_class)) { - pr_err("Error creating mtd class.\n"); - return PTR_ERR(mtd_class); + if (ret) { + pr_err("Error registering mtd class: %d\n", ret); + return ret; } #ifdef CONFIG_PROC_FS if ((proc_mtd = create_proc_entry( "mtd", 0, NULL ))) @@ -623,7 +650,7 @@ static void __exit cleanup_mtd(void) if (proc_mtd) remove_proc_entry( "mtd", NULL); #endif /* CONFIG_PROC_FS */ - class_destroy(mtd_class); + class_unregister(&mtd_class); } module_init(init_mtd); diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c index 29675edb44b4..349fcbe5cc0f 100644 --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c @@ -27,9 +27,7 @@ struct mtd_part { struct mtd_info mtd; struct mtd_info *master; uint64_t offset; - int index; struct list_head list; - int registered; }; /* @@ -321,8 +319,7 @@ int del_mtd_partitions(struct mtd_info *master) list_for_each_entry_safe(slave, next, &mtd_partitions, list) if (slave->master == master) { list_del(&slave->list); - if (slave->registered) - del_mtd_device(&slave->mtd); + del_mtd_device(&slave->mtd); kfree(slave); } @@ -395,7 +392,7 @@ static struct mtd_part *add_one_partition(struct mtd_info *master, slave->mtd.get_fact_prot_info = part_get_fact_prot_info; if (master->sync) slave->mtd.sync = part_sync; - if (!partno && master->suspend && master->resume) { + if (!partno && !master->dev.class && master->suspend && master->resume) { slave->mtd.suspend = part_suspend; slave->mtd.resume = part_resume; } @@ -412,7 +409,6 @@ static struct mtd_part *add_one_partition(struct mtd_info *master, slave->mtd.erase = part_erase; slave->master = master; slave->offset = part->offset; - slave->index = partno; if (slave->offset == MTDPART_OFS_APPEND) slave->offset = cur_offset; @@ -500,15 +496,9 @@ static struct mtd_part *add_one_partition(struct mtd_info *master, } out_register: - if (part->mtdp) { - /* store the object pointer (caller may or may not register it*/ - *part->mtdp = &slave->mtd; - slave->registered = 0; - } else { - /* register our partition */ - add_mtd_device(&slave->mtd); - slave->registered = 1; - } + /* register our partition */ + add_mtd_device(&slave->mtd); + return slave; } diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index f3276897859e..ce96c091f01b 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -74,6 +74,12 @@ config MTD_NAND_AMS_DELTA help Support for NAND flash on Amstrad E3 (Delta). +config MTD_NAND_OMAP2 + tristate "NAND Flash device on OMAP2 and OMAP3" + depends on ARM && MTD_NAND && (ARCH_OMAP2 || ARCH_OMAP3) + help + Support for NAND flash on Texas Instruments OMAP2 and OMAP3 platforms. + config MTD_NAND_TS7250 tristate "NAND Flash device on TS-7250 board" depends on MACH_TS72XX @@ -139,27 +145,27 @@ config MTD_NAND_PPCHAMELEONEVB This enables the NAND flash driver on the PPChameleon EVB Board. config MTD_NAND_S3C2410 - tristate "NAND Flash support for S3C2410/S3C2440 SoC" - depends on ARCH_S3C2410 + tristate "NAND Flash support for Samsung S3C SoCs" + depends on ARCH_S3C2410 || ARCH_S3C64XX help - This enables the NAND flash controller on the S3C2410 and S3C2440 + This enables the NAND flash controller on the S3C24xx and S3C64xx SoCs No board specific support is done by this driver, each board must advertise a platform_device for the driver to attach. config MTD_NAND_S3C2410_DEBUG - bool "S3C2410 NAND driver debug" + bool "Samsung S3C NAND driver debug" depends on MTD_NAND_S3C2410 help - Enable debugging of the S3C2410 NAND driver + Enable debugging of the S3C NAND driver config MTD_NAND_S3C2410_HWECC - bool "S3C2410 NAND Hardware ECC" + bool "Samsung S3C NAND Hardware ECC" depends on MTD_NAND_S3C2410 help - Enable the use of the S3C2410's internal ECC generator when - using NAND. Early versions of the chip have had problems with + Enable the use of the controller's internal ECC generator when + using NAND. Early versions of the chips have had problems with incorrect ECC generation, and if using these, the default of software ECC is preferable. @@ -171,7 +177,7 @@ config MTD_NAND_NDFC NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs config MTD_NAND_S3C2410_CLKSTOP - bool "S3C2410 NAND IDLE clock stop" + bool "Samsung S3C NAND IDLE clock stop" depends on MTD_NAND_S3C2410 default n help diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index d33860ac42c3..f3a786b3cff3 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_MTD_NAND_CS553X) += cs553x_nand.o obj-$(CONFIG_MTD_NAND_NDFC) += ndfc.o obj-$(CONFIG_MTD_NAND_ATMEL) += atmel_nand.o obj-$(CONFIG_MTD_NAND_GPIO) += gpio.o +obj-$(CONFIG_MTD_NAND_OMAP2) += omap2.o obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 47a33cec3793..2802992b39da 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -24,6 +24,7 @@ #include <linux/slab.h> #include <linux/module.h> +#include <linux/moduleparam.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> @@ -47,6 +48,9 @@ #define no_ecc 0 #endif +static int on_flash_bbt = 0; +module_param(on_flash_bbt, int, 0); + /* Register access macros */ #define ecc_readl(add, reg) \ __raw_readl(add + ATMEL_ECC_##reg) @@ -459,12 +463,17 @@ static int __init atmel_nand_probe(struct platform_device *pdev) if (host->board->det_pin) { if (gpio_get_value(host->board->det_pin)) { - printk("No SmartMedia card inserted.\n"); + printk(KERN_INFO "No SmartMedia card inserted.\n"); res = ENXIO; goto err_no_card; } } + if (on_flash_bbt) { + printk(KERN_INFO "atmel_nand: Use On Flash BBT\n"); + nand_chip->options |= NAND_USE_FLASH_BBT; + } + /* first scan to find the device and get the page size */ if (nand_scan_ident(mtd, 1)) { res = -ENXIO; diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c index 4c2a67ca801e..8506e7e606fd 100644 --- a/drivers/mtd/nand/bf5xx_nand.c +++ b/drivers/mtd/nand/bf5xx_nand.c @@ -458,7 +458,7 @@ static irqreturn_t bf5xx_nand_dma_irq(int irq, void *dev_id) return IRQ_HANDLED; } -static int bf5xx_nand_dma_rw(struct mtd_info *mtd, +static void bf5xx_nand_dma_rw(struct mtd_info *mtd, uint8_t *buf, int is_read) { struct bf5xx_nand_info *info = mtd_to_nand_info(mtd); @@ -496,11 +496,20 @@ static int bf5xx_nand_dma_rw(struct mtd_info *mtd, /* setup DMA register with Blackfin DMA API */ set_dma_config(CH_NFC, 0x0); set_dma_start_addr(CH_NFC, (unsigned long) buf); + +/* The DMAs have different size on BF52x and BF54x */ +#ifdef CONFIG_BF52x + set_dma_x_count(CH_NFC, (page_size >> 1)); + set_dma_x_modify(CH_NFC, 2); + val = DI_EN | WDSIZE_16; +#endif + +#ifdef CONFIG_BF54x set_dma_x_count(CH_NFC, (page_size >> 2)); set_dma_x_modify(CH_NFC, 4); - - /* setup write or read operation */ val = DI_EN | WDSIZE_32; +#endif + /* setup write or read operation */ if (is_read) val |= WNR; set_dma_config(CH_NFC, val); @@ -512,8 +521,6 @@ static int bf5xx_nand_dma_rw(struct mtd_info *mtd, else bfin_write_NFC_PGCTL(0x2); wait_for_completion(&info->dma_completion); - - return 0; } static void bf5xx_nand_dma_read_buf(struct mtd_info *mtd, diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index 02700f769b8a..0fad6487e6f4 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -44,7 +44,7 @@ * and some flavors of secondary chipselect (e.g. based on A12) as used * with multichip packages. * - * The 1-bit ECC hardware is supported, but not yet the newer 4-bit ECC + * The 1-bit ECC hardware is supported, as well as the newer 4-bit ECC * available on chips like the DM355 and OMAP-L137 and needed with the * more error-prone MLC NAND chips. * @@ -54,11 +54,14 @@ struct davinci_nand_info { struct mtd_info mtd; struct nand_chip chip; + struct nand_ecclayout ecclayout; struct device *dev; struct clk *clk; bool partitioned; + bool is_readmode; + void __iomem *base; void __iomem *vaddr; @@ -73,6 +76,7 @@ struct davinci_nand_info { }; static DEFINE_SPINLOCK(davinci_nand_lock); +static bool ecc4_busy; #define to_davinci_nand(m) container_of(m, struct davinci_nand_info, mtd) @@ -218,6 +222,192 @@ static int nand_davinci_correct_1bit(struct mtd_info *mtd, u_char *dat, /*----------------------------------------------------------------------*/ /* + * 4-bit hardware ECC ... context maintained over entire AEMIF + * + * This is a syndrome engine, but we avoid NAND_ECC_HW_SYNDROME + * since that forces use of a problematic "infix OOB" layout. + * Among other things, it trashes manufacturer bad block markers. + * Also, and specific to this hardware, it ECC-protects the "prepad" + * in the OOB ... while having ECC protection for parts of OOB would + * seem useful, the current MTD stack sometimes wants to update the + * OOB without recomputing ECC. + */ + +static void nand_davinci_hwctl_4bit(struct mtd_info *mtd, int mode) +{ + struct davinci_nand_info *info = to_davinci_nand(mtd); + unsigned long flags; + u32 val; + + spin_lock_irqsave(&davinci_nand_lock, flags); + + /* Start 4-bit ECC calculation for read/write */ + val = davinci_nand_readl(info, NANDFCR_OFFSET); + val &= ~(0x03 << 4); + val |= (info->core_chipsel << 4) | BIT(12); + davinci_nand_writel(info, NANDFCR_OFFSET, val); + + info->is_readmode = (mode == NAND_ECC_READ); + + spin_unlock_irqrestore(&davinci_nand_lock, flags); +} + +/* Read raw ECC code after writing to NAND. */ +static void +nand_davinci_readecc_4bit(struct davinci_nand_info *info, u32 code[4]) +{ + const u32 mask = 0x03ff03ff; + + code[0] = davinci_nand_readl(info, NAND_4BIT_ECC1_OFFSET) & mask; + code[1] = davinci_nand_readl(info, NAND_4BIT_ECC2_OFFSET) & mask; + code[2] = davinci_nand_readl(info, NAND_4BIT_ECC3_OFFSET) & mask; + code[3] = davinci_nand_readl(info, NAND_4BIT_ECC4_OFFSET) & mask; +} + +/* Terminate read ECC; or return ECC (as bytes) of data written to NAND. */ +static int nand_davinci_calculate_4bit(struct mtd_info *mtd, + const u_char *dat, u_char *ecc_code) +{ + struct davinci_nand_info *info = to_davinci_nand(mtd); + u32 raw_ecc[4], *p; + unsigned i; + + /* After a read, terminate ECC calculation by a dummy read + * of some 4-bit ECC register. ECC covers everything that + * was read; correct() just uses the hardware state, so + * ecc_code is not needed. + */ + if (info->is_readmode) { + davinci_nand_readl(info, NAND_4BIT_ECC1_OFFSET); + return 0; + } + + /* Pack eight raw 10-bit ecc values into ten bytes, making + * two passes which each convert four values (in upper and + * lower halves of two 32-bit words) into five bytes. The + * ROM boot loader uses this same packing scheme. + */ + nand_davinci_readecc_4bit(info, raw_ecc); + for (i = 0, p = raw_ecc; i < 2; i++, p += 2) { + *ecc_code++ = p[0] & 0xff; + *ecc_code++ = ((p[0] >> 8) & 0x03) | ((p[0] >> 14) & 0xfc); + *ecc_code++ = ((p[0] >> 22) & 0x0f) | ((p[1] << 4) & 0xf0); + *ecc_code++ = ((p[1] >> 4) & 0x3f) | ((p[1] >> 10) & 0xc0); + *ecc_code++ = (p[1] >> 18) & 0xff; + } + + return 0; +} + +/* Correct up to 4 bits in data we just read, using state left in the + * hardware plus the ecc_code computed when it was first written. + */ +static int nand_davinci_correct_4bit(struct mtd_info *mtd, + u_char *data, u_char *ecc_code, u_char *null) +{ + int i; + struct davinci_nand_info *info = to_davinci_nand(mtd); + unsigned short ecc10[8]; + unsigned short *ecc16; + u32 syndrome[4]; + unsigned num_errors, corrected; + + /* All bytes 0xff? It's an erased page; ignore its ECC. */ + for (i = 0; i < 10; i++) { + if (ecc_code[i] != 0xff) + goto compare; + } + return 0; + +compare: + /* Unpack ten bytes into eight 10 bit values. We know we're + * little-endian, and use type punning for less shifting/masking. + */ + if (WARN_ON(0x01 & (unsigned) ecc_code)) + return -EINVAL; + ecc16 = (unsigned short *)ecc_code; + + ecc10[0] = (ecc16[0] >> 0) & 0x3ff; + ecc10[1] = ((ecc16[0] >> 10) & 0x3f) | ((ecc16[1] << 6) & 0x3c0); + ecc10[2] = (ecc16[1] >> 4) & 0x3ff; + ecc10[3] = ((ecc16[1] >> 14) & 0x3) | ((ecc16[2] << 2) & 0x3fc); + ecc10[4] = (ecc16[2] >> 8) | ((ecc16[3] << 8) & 0x300); + ecc10[5] = (ecc16[3] >> 2) & 0x3ff; + ecc10[6] = ((ecc16[3] >> 12) & 0xf) | ((ecc16[4] << 4) & 0x3f0); + ecc10[7] = (ecc16[4] >> 6) & 0x3ff; + + /* Tell ECC controller about the expected ECC codes. */ + for (i = 7; i >= 0; i--) + davinci_nand_writel(info, NAND_4BIT_ECC_LOAD_OFFSET, ecc10[i]); + + /* Allow time for syndrome calculation ... then read it. + * A syndrome of all zeroes 0 means no detected errors. + */ + davinci_nand_readl(info, NANDFSR_OFFSET); + nand_davinci_readecc_4bit(info, syndrome); + if (!(syndrome[0] | syndrome[1] | syndrome[2] | syndrome[3])) + return 0; + + /* Start address calculation, and wait for it to complete. + * We _could_ start reading more data while this is working, + * to speed up the overall page read. + */ + davinci_nand_writel(info, NANDFCR_OFFSET, + davinci_nand_readl(info, NANDFCR_OFFSET) | BIT(13)); + for (;;) { + u32 fsr = davinci_nand_readl(info, NANDFSR_OFFSET); + + switch ((fsr >> 8) & 0x0f) { + case 0: /* no error, should not happen */ + return 0; + case 1: /* five or more errors detected */ + return -EIO; + case 2: /* error addresses computed */ + case 3: + num_errors = 1 + ((fsr >> 16) & 0x03); + goto correct; + default: /* still working on it */ + cpu_relax(); + continue; + } + } + +correct: + /* correct each error */ + for (i = 0, corrected = 0; i < num_errors; i++) { + int error_address, error_value; + + if (i > 1) { + error_address = davinci_nand_readl(info, + NAND_ERR_ADD2_OFFSET); + error_value = davinci_nand_readl(info, + NAND_ERR_ERRVAL2_OFFSET); + } else { + error_address = davinci_nand_readl(info, + NAND_ERR_ADD1_OFFSET); + error_value = davinci_nand_readl(info, + NAND_ERR_ERRVAL1_OFFSET); + } + + if (i & 1) { + error_address >>= 16; + error_value >>= 16; + } + error_address &= 0x3ff; + error_address = (512 + 7) - error_address; + + if (error_address < 512) { + data[error_address] ^= error_value; + corrected++; + } + } + + return corrected; +} + +/*----------------------------------------------------------------------*/ + +/* * NOTE: NAND boot requires ALE == EM_A[1], CLE == EM_A[2], so that's * how these chips are normally wired. This translates to both 8 and 16 * bit busses using ALE == BIT(3) in byte addresses, and CLE == BIT(4). @@ -294,6 +484,23 @@ static void __init nand_dm6446evm_flash_init(struct davinci_nand_info *info) /*----------------------------------------------------------------------*/ +/* An ECC layout for using 4-bit ECC with small-page flash, storing + * ten ECC bytes plus the manufacturer's bad block marker byte, and + * and not overlapping the default BBT markers. + */ +static struct nand_ecclayout hwecc4_small __initconst = { + .eccbytes = 10, + .eccpos = { 0, 1, 2, 3, 4, + /* offset 5 holds the badblock marker */ + 6, 7, + 13, 14, 15, }, + .oobfree = { + {.offset = 8, .length = 5, }, + {.offset = 16, }, + }, +}; + + static int __init nand_davinci_probe(struct platform_device *pdev) { struct davinci_nand_pdata *pdata = pdev->dev.platform_data; @@ -306,6 +513,10 @@ static int __init nand_davinci_probe(struct platform_device *pdev) uint32_t val; nand_ecc_modes_t ecc_mode; + /* insist on board-specific configuration */ + if (!pdata) + return -ENODEV; + /* which external chipselect will we be managing? */ if (pdev->id < 0 || pdev->id > 3) return -ENODEV; @@ -351,7 +562,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev) info->chip.select_chip = nand_davinci_select_chip; /* options such as NAND_USE_FLASH_BBT or 16-bit widths */ - info->chip.options = pdata ? pdata->options : 0; + info->chip.options = pdata->options; info->ioaddr = (uint32_t __force) vaddr; @@ -360,14 +571,8 @@ static int __init nand_davinci_probe(struct platform_device *pdev) info->mask_chipsel = pdata->mask_chipsel; /* use nandboot-capable ALE/CLE masks by default */ - if (pdata && pdata->mask_ale) - info->mask_ale = pdata->mask_cle; - else - info->mask_ale = MASK_ALE; - if (pdata && pdata->mask_cle) - info->mask_cle = pdata->mask_cle; - else - info->mask_cle = MASK_CLE; + info->mask_ale = pdata->mask_cle ? : MASK_ALE; + info->mask_cle = pdata->mask_cle ? : MASK_CLE; /* Set address of hardware control function */ info->chip.cmd_ctrl = nand_davinci_hwcontrol; @@ -377,30 +582,44 @@ static int __init nand_davinci_probe(struct platform_device *pdev) info->chip.read_buf = nand_davinci_read_buf; info->chip.write_buf = nand_davinci_write_buf; - /* use board-specific ECC config; else, the best available */ - if (pdata) - ecc_mode = pdata->ecc_mode; - else - ecc_mode = NAND_ECC_HW; + /* Use board-specific ECC config */ + ecc_mode = pdata->ecc_mode; + ret = -EINVAL; switch (ecc_mode) { case NAND_ECC_NONE: case NAND_ECC_SOFT: + pdata->ecc_bits = 0; break; case NAND_ECC_HW: - info->chip.ecc.calculate = nand_davinci_calculate_1bit; - info->chip.ecc.correct = nand_davinci_correct_1bit; - info->chip.ecc.hwctl = nand_davinci_hwctl_1bit; + if (pdata->ecc_bits == 4) { + /* No sanity checks: CPUs must support this, + * and the chips may not use NAND_BUSWIDTH_16. + */ + + /* No sharing 4-bit hardware between chipselects yet */ + spin_lock_irq(&davinci_nand_lock); + if (ecc4_busy) + ret = -EBUSY; + else + ecc4_busy = true; + spin_unlock_irq(&davinci_nand_lock); + + if (ret == -EBUSY) + goto err_ecc; + + info->chip.ecc.calculate = nand_davinci_calculate_4bit; + info->chip.ecc.correct = nand_davinci_correct_4bit; + info->chip.ecc.hwctl = nand_davinci_hwctl_4bit; + info->chip.ecc.bytes = 10; + } else { + info->chip.ecc.calculate = nand_davinci_calculate_1bit; + info->chip.ecc.correct = nand_davinci_correct_1bit; + info->chip.ecc.hwctl = nand_davinci_hwctl_1bit; + info->chip.ecc.bytes = 3; + } info->chip.ecc.size = 512; - info->chip.ecc.bytes = 3; break; - case NAND_ECC_HW_SYNDROME: - /* FIXME implement */ - info->chip.ecc.size = 512; - info->chip.ecc.bytes = 10; - - dev_warn(&pdev->dev, "4-bit ECC nyet supported\n"); - /* FALL THROUGH */ default: ret = -EINVAL; goto err_ecc; @@ -441,12 +660,56 @@ static int __init nand_davinci_probe(struct platform_device *pdev) spin_unlock_irq(&davinci_nand_lock); /* Scan to find existence of the device(s) */ - ret = nand_scan(&info->mtd, pdata->mask_chipsel ? 2 : 1); + ret = nand_scan_ident(&info->mtd, pdata->mask_chipsel ? 2 : 1); if (ret < 0) { dev_dbg(&pdev->dev, "no NAND chip(s) found\n"); goto err_scan; } + /* Update ECC layout if needed ... for 1-bit HW ECC, the default + * is OK, but it allocates 6 bytes when only 3 are needed (for + * each 512 bytes). For the 4-bit HW ECC, that default is not + * usable: 10 bytes are needed, not 6. + */ + if (pdata->ecc_bits == 4) { + int chunks = info->mtd.writesize / 512; + + if (!chunks || info->mtd.oobsize < 16) { + dev_dbg(&pdev->dev, "too small\n"); + ret = -EINVAL; + goto err_scan; + } + + /* For small page chips, preserve the manufacturer's + * badblock marking data ... and make sure a flash BBT + * table marker fits in the free bytes. + */ + if (chunks == 1) { + info->ecclayout = hwecc4_small; + info->ecclayout.oobfree[1].length = + info->mtd.oobsize - 16; + goto syndrome_done; + } + + /* For large page chips we'll be wanting to use a + * not-yet-implemented mode that reads OOB data + * before reading the body of the page, to avoid + * the "infix OOB" model of NAND_ECC_HW_SYNDROME + * (and preserve manufacturer badblock markings). + */ + dev_warn(&pdev->dev, "no 4-bit ECC support yet " + "for large page NAND\n"); + ret = -EIO; + goto err_scan; + +syndrome_done: + info->chip.ecc.layout = &info->ecclayout; + } + + ret = nand_scan_tail(&info->mtd); + if (ret < 0) + goto err_scan; + if (mtd_has_partitions()) { struct mtd_partition *mtd_parts = NULL; int mtd_parts_nb = 0; @@ -455,22 +718,11 @@ static int __init nand_davinci_probe(struct platform_device *pdev) static const char *probes[] __initconst = { "cmdlinepart", NULL }; - const char *master_name; - - /* Set info->mtd.name = 0 temporarily */ - master_name = info->mtd.name; - info->mtd.name = (char *)0; - - /* info->mtd.name == 0, means: don't bother checking - <mtd-id> */ mtd_parts_nb = parse_mtd_partitions(&info->mtd, probes, &mtd_parts, 0); - - /* Restore info->mtd.name */ - info->mtd.name = master_name; } - if (mtd_parts_nb <= 0 && pdata) { + if (mtd_parts_nb <= 0) { mtd_parts = pdata->parts; mtd_parts_nb = pdata->nr_parts; } @@ -483,7 +735,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev) info->partitioned = true; } - } else if (pdata && pdata->nr_parts) { + } else if (pdata->nr_parts) { dev_warn(&pdev->dev, "ignoring %d default partitions on %s\n", pdata->nr_parts, info->mtd.name); } @@ -509,6 +761,11 @@ err_scan: err_clk_enable: clk_put(info->clk); + spin_lock_irq(&davinci_nand_lock); + if (ecc_mode == NAND_ECC_HW_SYNDROME) + ecc4_busy = false; + spin_unlock_irq(&davinci_nand_lock); + err_ecc: err_clk: err_ioremap: @@ -532,6 +789,11 @@ static int __exit nand_davinci_remove(struct platform_device *pdev) else status = del_mtd_device(&info->mtd); + spin_lock_irq(&davinci_nand_lock); + if (info->chip.ecc.mode == NAND_ECC_HW_SYNDROME) + ecc4_busy = false; + spin_unlock_irq(&davinci_nand_lock); + iounmap(info->base); iounmap(info->vaddr); diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 40c26080ecda..76beea40d2cf 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -138,7 +138,14 @@ static struct nand_ecclayout nand_hw_eccoob_8 = { static struct nand_ecclayout nand_hw_eccoob_16 = { .eccbytes = 5, .eccpos = {6, 7, 8, 9, 10}, - .oobfree = {{0, 6}, {12, 4}, } + .oobfree = {{0, 5}, {11, 5}, } +}; + +static struct nand_ecclayout nand_hw_eccoob_64 = { + .eccbytes = 20, + .eccpos = {6, 7, 8, 9, 10, 22, 23, 24, 25, 26, + 38, 39, 40, 41, 42, 54, 55, 56, 57, 58}, + .oobfree = {{2, 4}, {11, 10}, {27, 10}, {43, 10}, {59, 5}, } }; #ifdef CONFIG_MTD_PARTITIONS @@ -192,7 +199,7 @@ static void wait_op_done(struct mxc_nand_host *host, int max_retries, } udelay(1); } - if (max_retries <= 0) + if (max_retries < 0) DEBUG(MTD_DEBUG_LEVEL0, "%s(%d): INT not set\n", __func__, param); } @@ -795,9 +802,13 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command, send_addr(host, (page_addr & 0xff), false); if (host->pagesize_2k) { - send_addr(host, (page_addr >> 8) & 0xFF, false); - if (mtd->size >= 0x40000000) + if (mtd->size >= 0x10000000) { + /* paddr_8 - paddr_15 */ + send_addr(host, (page_addr >> 8) & 0xff, false); send_addr(host, (page_addr >> 16) & 0xff, true); + } else + /* paddr_8 - paddr_15 */ + send_addr(host, (page_addr >> 8) & 0xff, true); } else { /* One more address cycle for higher density devices */ if (mtd->size >= 0x4000000) { @@ -923,7 +934,6 @@ static int __init mxcnd_probe(struct platform_device *pdev) this->ecc.mode = NAND_ECC_HW; this->ecc.size = 512; this->ecc.bytes = 3; - this->ecc.layout = &nand_hw_eccoob_8; tmp = readw(host->regs + NFC_CONFIG1); tmp |= NFC_ECC_EN; writew(tmp, host->regs + NFC_CONFIG1); @@ -957,12 +967,44 @@ static int __init mxcnd_probe(struct platform_device *pdev) this->ecc.layout = &nand_hw_eccoob_16; } - host->pagesize_2k = 0; + /* first scan to find the device and get the page size */ + if (nand_scan_ident(mtd, 1)) { + err = -ENXIO; + goto escan; + } - /* Scan to find existence of the device */ - if (nand_scan(mtd, 1)) { - DEBUG(MTD_DEBUG_LEVEL0, - "MXC_ND: Unable to find any NAND device.\n"); + host->pagesize_2k = (mtd->writesize == 2048) ? 1 : 0; + + if (this->ecc.mode == NAND_ECC_HW) { + switch (mtd->oobsize) { + case 8: + this->ecc.layout = &nand_hw_eccoob_8; + break; + case 16: + this->ecc.layout = &nand_hw_eccoob_16; + break; + case 64: + this->ecc.layout = &nand_hw_eccoob_64; + break; + default: + /* page size not handled by HW ECC */ + /* switching back to soft ECC */ + this->ecc.size = 512; + this->ecc.bytes = 3; + this->ecc.layout = &nand_hw_eccoob_8; + this->ecc.mode = NAND_ECC_SOFT; + this->ecc.calculate = NULL; + this->ecc.correct = NULL; + this->ecc.hwctl = NULL; + tmp = readw(host->regs + NFC_CONFIG1); + tmp &= ~NFC_ECC_EN; + writew(tmp, host->regs + NFC_CONFIG1); + break; + } + } + + /* second phase scan */ + if (nand_scan_tail(mtd)) { err = -ENXIO; goto escan; } @@ -985,7 +1027,7 @@ static int __init mxcnd_probe(struct platform_device *pdev) return 0; escan: - free_irq(host->irq, NULL); + free_irq(host->irq, host); eirq: iounmap(host->regs); eres: @@ -1005,7 +1047,7 @@ static int __devexit mxcnd_remove(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); nand_release(&host->mtd); - free_irq(host->irq, NULL); + free_irq(host->irq, host); iounmap(host->regs); kfree(host); diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 3d7ed432fa41..8c21b89d2d0c 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2756,7 +2756,8 @@ int nand_scan_tail(struct mtd_info *mtd) * the out of band area */ chip->ecc.layout->oobavail = 0; - for (i = 0; chip->ecc.layout->oobfree[i].length; i++) + for (i = 0; chip->ecc.layout->oobfree[i].length + && i < ARRAY_SIZE(chip->ecc.layout->oobfree); i++) chip->ecc.layout->oobavail += chip->ecc.layout->oobfree[i].length; mtd->oobavail = chip->ecc.layout->oobavail; diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c index 868147acce2c..c0cb87d6d16e 100644 --- a/drivers/mtd/nand/nand_ecc.c +++ b/drivers/mtd/nand/nand_ecc.c @@ -428,8 +428,8 @@ EXPORT_SYMBOL(nand_calculate_ecc); int nand_correct_data(struct mtd_info *mtd, unsigned char *buf, unsigned char *read_ecc, unsigned char *calc_ecc) { - unsigned char b0, b1, b2; - unsigned char byte_addr, bit_addr; + unsigned char b0, b1, b2, bit_addr; + unsigned int byte_addr; /* 256 or 512 bytes/ecc */ const uint32_t eccsize_mult = (((struct nand_chip *)mtd->priv)->ecc.size) >> 8; diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c new file mode 100644 index 000000000000..0cd76f89f4b0 --- /dev/null +++ b/drivers/mtd/nand/omap2.c @@ -0,0 +1,776 @@ +/* + * Copyright © 2004 Texas Instruments, Jian Zhang <jzhang@ti.com> + * Copyright © 2004 Micron Technology Inc. + * Copyright © 2004 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/delay.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> +#include <linux/io.h> + +#include <asm/dma.h> + +#include <mach/gpmc.h> +#include <mach/nand.h> + +#define GPMC_IRQ_STATUS 0x18 +#define GPMC_ECC_CONFIG 0x1F4 +#define GPMC_ECC_CONTROL 0x1F8 +#define GPMC_ECC_SIZE_CONFIG 0x1FC +#define GPMC_ECC1_RESULT 0x200 + +#define DRIVER_NAME "omap2-nand" + +/* size (4 KiB) for IO mapping */ +#define NAND_IO_SIZE SZ_4K + +#define NAND_WP_OFF 0 +#define NAND_WP_BIT 0x00000010 +#define WR_RD_PIN_MONITORING 0x00600000 + +#define GPMC_BUF_FULL 0x00000001 +#define GPMC_BUF_EMPTY 0x00000000 + +#define NAND_Ecc_P1e (1 << 0) +#define NAND_Ecc_P2e (1 << 1) +#define NAND_Ecc_P4e (1 << 2) +#define NAND_Ecc_P8e (1 << 3) +#define NAND_Ecc_P16e (1 << 4) +#define NAND_Ecc_P32e (1 << 5) +#define NAND_Ecc_P64e (1 << 6) +#define NAND_Ecc_P128e (1 << 7) +#define NAND_Ecc_P256e (1 << 8) +#define NAND_Ecc_P512e (1 << 9) +#define NAND_Ecc_P1024e (1 << 10) +#define NAND_Ecc_P2048e (1 << 11) + +#define NAND_Ecc_P1o (1 << 16) +#define NAND_Ecc_P2o (1 << 17) +#define NAND_Ecc_P4o (1 << 18) +#define NAND_Ecc_P8o (1 << 19) +#define NAND_Ecc_P16o (1 << 20) +#define NAND_Ecc_P32o (1 << 21) +#define NAND_Ecc_P64o (1 << 22) +#define NAND_Ecc_P128o (1 << 23) +#define NAND_Ecc_P256o (1 << 24) +#define NAND_Ecc_P512o (1 << 25) +#define NAND_Ecc_P1024o (1 << 26) +#define NAND_Ecc_P2048o (1 << 27) + +#define TF(value) (value ? 1 : 0) + +#define P2048e(a) (TF(a & NAND_Ecc_P2048e) << 0) +#define P2048o(a) (TF(a & NAND_Ecc_P2048o) << 1) +#define P1e(a) (TF(a & NAND_Ecc_P1e) << 2) +#define P1o(a) (TF(a & NAND_Ecc_P1o) << 3) +#define P2e(a) (TF(a & NAND_Ecc_P2e) << 4) +#define P2o(a) (TF(a & NAND_Ecc_P2o) << 5) +#define P4e(a) (TF(a & NAND_Ecc_P4e) << 6) +#define P4o(a) (TF(a & NAND_Ecc_P4o) << 7) + +#define P8e(a) (TF(a & NAND_Ecc_P8e) << 0) +#define P8o(a) (TF(a & NAND_Ecc_P8o) << 1) +#define P16e(a) (TF(a & NAND_Ecc_P16e) << 2) +#define P16o(a) (TF(a & NAND_Ecc_P16o) << 3) +#define P32e(a) (TF(a & NAND_Ecc_P32e) << 4) +#define P32o(a) (TF(a & NAND_Ecc_P32o) << 5) +#define P64e(a) (TF(a & NAND_Ecc_P64e) << 6) +#define P64o(a) (TF(a & NAND_Ecc_P64o) << 7) + +#define P128e(a) (TF(a & NAND_Ecc_P128e) << 0) +#define P128o(a) (TF(a & NAND_Ecc_P128o) << 1) +#define P256e(a) (TF(a & NAND_Ecc_P256e) << 2) +#define P256o(a) (TF(a & NAND_Ecc_P256o) << 3) +#define P512e(a) (TF(a & NAND_Ecc_P512e) << 4) +#define P512o(a) (TF(a & NAND_Ecc_P512o) << 5) +#define P1024e(a) (TF(a & NAND_Ecc_P1024e) << 6) +#define P1024o(a) (TF(a & NAND_Ecc_P1024o) << 7) + +#define P8e_s(a) (TF(a & NAND_Ecc_P8e) << 0) +#define P8o_s(a) (TF(a & NAND_Ecc_P8o) << 1) +#define P16e_s(a) (TF(a & NAND_Ecc_P16e) << 2) +#define P16o_s(a) (TF(a & NAND_Ecc_P16o) << 3) +#define P1e_s(a) (TF(a & NAND_Ecc_P1e) << 4) +#define P1o_s(a) (TF(a & NAND_Ecc_P1o) << 5) +#define P2e_s(a) (TF(a & NAND_Ecc_P2e) << 6) +#define P2o_s(a) (TF(a & NAND_Ecc_P2o) << 7) + +#define P4e_s(a) (TF(a & NAND_Ecc_P4e) << 0) +#define P4o_s(a) (TF(a & NAND_Ecc_P4o) << 1) + +#ifdef CONFIG_MTD_PARTITIONS +static const char *part_probes[] = { "cmdlinepart", NULL }; +#endif + +struct omap_nand_info { + struct nand_hw_control controller; + struct omap_nand_platform_data *pdata; + struct mtd_info mtd; + struct mtd_partition *parts; + struct nand_chip nand; + struct platform_device *pdev; + + int gpmc_cs; + unsigned long phys_base; + void __iomem *gpmc_cs_baseaddr; + void __iomem *gpmc_baseaddr; +}; + +/** + * omap_nand_wp - This function enable or disable the Write Protect feature + * @mtd: MTD device structure + * @mode: WP ON/OFF + */ +static void omap_nand_wp(struct mtd_info *mtd, int mode) +{ + struct omap_nand_info *info = container_of(mtd, + struct omap_nand_info, mtd); + + unsigned long config = __raw_readl(info->gpmc_baseaddr + GPMC_CONFIG); + + if (mode) + config &= ~(NAND_WP_BIT); /* WP is ON */ + else + config |= (NAND_WP_BIT); /* WP is OFF */ + + __raw_writel(config, (info->gpmc_baseaddr + GPMC_CONFIG)); +} + +/** + * omap_hwcontrol - hardware specific access to control-lines + * @mtd: MTD device structure + * @cmd: command to device + * @ctrl: + * NAND_NCE: bit 0 -> don't care + * NAND_CLE: bit 1 -> Command Latch + * NAND_ALE: bit 2 -> Address Latch + * + * NOTE: boards may use different bits for these!! + */ +static void omap_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct omap_nand_info *info = container_of(mtd, + struct omap_nand_info, mtd); + switch (ctrl) { + case NAND_CTRL_CHANGE | NAND_CTRL_CLE: + info->nand.IO_ADDR_W = info->gpmc_cs_baseaddr + + GPMC_CS_NAND_COMMAND; + info->nand.IO_ADDR_R = info->gpmc_cs_baseaddr + + GPMC_CS_NAND_DATA; + break; + + case NAND_CTRL_CHANGE | NAND_CTRL_ALE: + info->nand.IO_ADDR_W = info->gpmc_cs_baseaddr + + GPMC_CS_NAND_ADDRESS; + info->nand.IO_ADDR_R = info->gpmc_cs_baseaddr + + GPMC_CS_NAND_DATA; + break; + + case NAND_CTRL_CHANGE | NAND_NCE: + info->nand.IO_ADDR_W = info->gpmc_cs_baseaddr + + GPMC_CS_NAND_DATA; + info->nand.IO_ADDR_R = info->gpmc_cs_baseaddr + + GPMC_CS_NAND_DATA; + break; + } + + if (cmd != NAND_CMD_NONE) + __raw_writeb(cmd, info->nand.IO_ADDR_W); +} + +/** + * omap_read_buf16 - read data from NAND controller into buffer + * @mtd: MTD device structure + * @buf: buffer to store date + * @len: number of bytes to read + */ +static void omap_read_buf16(struct mtd_info *mtd, u_char *buf, int len) +{ + struct nand_chip *nand = mtd->priv; + + __raw_readsw(nand->IO_ADDR_R, buf, len / 2); +} + +/** + * omap_write_buf16 - write buffer to NAND controller + * @mtd: MTD device structure + * @buf: data buffer + * @len: number of bytes to write + */ +static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len) +{ + struct omap_nand_info *info = container_of(mtd, + struct omap_nand_info, mtd); + u16 *p = (u16 *) buf; + + /* FIXME try bursts of writesw() or DMA ... */ + len >>= 1; + + while (len--) { + writew(*p++, info->nand.IO_ADDR_W); + + while (GPMC_BUF_EMPTY == (readl(info->gpmc_baseaddr + + GPMC_STATUS) & GPMC_BUF_FULL)) + ; + } +} +/** + * omap_verify_buf - Verify chip data against buffer + * @mtd: MTD device structure + * @buf: buffer containing the data to compare + * @len: number of bytes to compare + */ +static int omap_verify_buf(struct mtd_info *mtd, const u_char * buf, int len) +{ + struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, + mtd); + u16 *p = (u16 *) buf; + + len >>= 1; + while (len--) { + if (*p++ != cpu_to_le16(readw(info->nand.IO_ADDR_R))) + return -EFAULT; + } + + return 0; +} + +#ifdef CONFIG_MTD_NAND_OMAP_HWECC +/** + * omap_hwecc_init - Initialize the HW ECC for NAND flash in GPMC controller + * @mtd: MTD device structure + */ +static void omap_hwecc_init(struct mtd_info *mtd) +{ + struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, + mtd); + struct nand_chip *chip = mtd->priv; + unsigned long val = 0x0; + + /* Read from ECC Control Register */ + val = __raw_readl(info->gpmc_baseaddr + GPMC_ECC_CONTROL); + /* Clear all ECC | Enable Reg1 */ + val = ((0x00000001<<8) | 0x00000001); + __raw_writel(val, info->gpmc_baseaddr + GPMC_ECC_CONTROL); + + /* Read from ECC Size Config Register */ + val = __raw_readl(info->gpmc_baseaddr + GPMC_ECC_SIZE_CONFIG); + /* ECCSIZE1=512 | Select eccResultsize[0-3] */ + val = ((((chip->ecc.size >> 1) - 1) << 22) | (0x0000000F)); + __raw_writel(val, info->gpmc_baseaddr + GPMC_ECC_SIZE_CONFIG); +} + +/** + * gen_true_ecc - This function will generate true ECC value + * @ecc_buf: buffer to store ecc code + * + * This generated true ECC value can be used when correcting + * data read from NAND flash memory core + */ +static void gen_true_ecc(u8 *ecc_buf) +{ + u32 tmp = ecc_buf[0] | (ecc_buf[1] << 16) | + ((ecc_buf[2] & 0xF0) << 20) | ((ecc_buf[2] & 0x0F) << 8); + + ecc_buf[0] = ~(P64o(tmp) | P64e(tmp) | P32o(tmp) | P32e(tmp) | + P16o(tmp) | P16e(tmp) | P8o(tmp) | P8e(tmp)); + ecc_buf[1] = ~(P1024o(tmp) | P1024e(tmp) | P512o(tmp) | P512e(tmp) | + P256o(tmp) | P256e(tmp) | P128o(tmp) | P128e(tmp)); + ecc_buf[2] = ~(P4o(tmp) | P4e(tmp) | P2o(tmp) | P2e(tmp) | P1o(tmp) | + P1e(tmp) | P2048o(tmp) | P2048e(tmp)); +} + +/** + * omap_compare_ecc - Detect (2 bits) and correct (1 bit) error in data + * @ecc_data1: ecc code from nand spare area + * @ecc_data2: ecc code from hardware register obtained from hardware ecc + * @page_data: page data + * + * This function compares two ECC's and indicates if there is an error. + * If the error can be corrected it will be corrected to the buffer. + */ +static int omap_compare_ecc(u8 *ecc_data1, /* read from NAND memory */ + u8 *ecc_data2, /* read from register */ + u8 *page_data) +{ + uint i; + u8 tmp0_bit[8], tmp1_bit[8], tmp2_bit[8]; + u8 comp0_bit[8], comp1_bit[8], comp2_bit[8]; + u8 ecc_bit[24]; + u8 ecc_sum = 0; + u8 find_bit = 0; + uint find_byte = 0; + int isEccFF; + + isEccFF = ((*(u32 *)ecc_data1 & 0xFFFFFF) == 0xFFFFFF); + + gen_true_ecc(ecc_data1); + gen_true_ecc(ecc_data2); + + for (i = 0; i <= 2; i++) { + *(ecc_data1 + i) = ~(*(ecc_data1 + i)); + *(ecc_data2 + i) = ~(*(ecc_data2 + i)); + } + + for (i = 0; i < 8; i++) { + tmp0_bit[i] = *ecc_data1 % 2; + *ecc_data1 = *ecc_data1 / 2; + } + + for (i = 0; i < 8; i++) { + tmp1_bit[i] = *(ecc_data1 + 1) % 2; + *(ecc_data1 + 1) = *(ecc_data1 + 1) / 2; + } + + for (i = 0; i < 8; i++) { + tmp2_bit[i] = *(ecc_data1 + 2) % 2; + *(ecc_data1 + 2) = *(ecc_data1 + 2) / 2; + } + + for (i = 0; i < 8; i++) { + comp0_bit[i] = *ecc_data2 % 2; + *ecc_data2 = *ecc_data2 / 2; + } + + for (i = 0; i < 8; i++) { + comp1_bit[i] = *(ecc_data2 + 1) % 2; + *(ecc_data2 + 1) = *(ecc_data2 + 1) / 2; + } + + for (i = 0; i < 8; i++) { + comp2_bit[i] = *(ecc_data2 + 2) % 2; + *(ecc_data2 + 2) = *(ecc_data2 + 2) / 2; + } + + for (i = 0; i < 6; i++) + ecc_bit[i] = tmp2_bit[i + 2] ^ comp2_bit[i + 2]; + + for (i = 0; i < 8; i++) + ecc_bit[i + 6] = tmp0_bit[i] ^ comp0_bit[i]; + + for (i = 0; i < 8; i++) + ecc_bit[i + 14] = tmp1_bit[i] ^ comp1_bit[i]; + + ecc_bit[22] = tmp2_bit[0] ^ comp2_bit[0]; + ecc_bit[23] = tmp2_bit[1] ^ comp2_bit[1]; + + for (i = 0; i < 24; i++) + ecc_sum += ecc_bit[i]; + + switch (ecc_sum) { + case 0: + /* Not reached because this function is not called if + * ECC values are equal + */ + return 0; + + case 1: + /* Uncorrectable error */ + DEBUG(MTD_DEBUG_LEVEL0, "ECC UNCORRECTED_ERROR 1\n"); + return -1; + + case 11: + /* UN-Correctable error */ + DEBUG(MTD_DEBUG_LEVEL0, "ECC UNCORRECTED_ERROR B\n"); + return -1; + + case 12: + /* Correctable error */ + find_byte = (ecc_bit[23] << 8) + + (ecc_bit[21] << 7) + + (ecc_bit[19] << 6) + + (ecc_bit[17] << 5) + + (ecc_bit[15] << 4) + + (ecc_bit[13] << 3) + + (ecc_bit[11] << 2) + + (ecc_bit[9] << 1) + + ecc_bit[7]; + + find_bit = (ecc_bit[5] << 2) + (ecc_bit[3] << 1) + ecc_bit[1]; + + DEBUG(MTD_DEBUG_LEVEL0, "Correcting single bit ECC error at " + "offset: %d, bit: %d\n", find_byte, find_bit); + + page_data[find_byte] ^= (1 << find_bit); + + return 0; + default: + if (isEccFF) { + if (ecc_data2[0] == 0 && + ecc_data2[1] == 0 && + ecc_data2[2] == 0) + return 0; + } + DEBUG(MTD_DEBUG_LEVEL0, "UNCORRECTED_ERROR default\n"); + return -1; + } +} + +/** + * omap_correct_data - Compares the ECC read with HW generated ECC + * @mtd: MTD device structure + * @dat: page data + * @read_ecc: ecc read from nand flash + * @calc_ecc: ecc read from HW ECC registers + * + * Compares the ecc read from nand spare area with ECC registers values + * and if ECC's mismached, it will call 'omap_compare_ecc' for error detection + * and correction. + */ +static int omap_correct_data(struct mtd_info *mtd, u_char *dat, + u_char *read_ecc, u_char *calc_ecc) +{ + struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, + mtd); + int blockCnt = 0, i = 0, ret = 0; + + /* Ex NAND_ECC_HW12_2048 */ + if ((info->nand.ecc.mode == NAND_ECC_HW) && + (info->nand.ecc.size == 2048)) + blockCnt = 4; + else + blockCnt = 1; + + for (i = 0; i < blockCnt; i++) { + if (memcmp(read_ecc, calc_ecc, 3) != 0) { + ret = omap_compare_ecc(read_ecc, calc_ecc, dat); + if (ret < 0) + return ret; + } + read_ecc += 3; + calc_ecc += 3; + dat += 512; + } + return 0; +} + +/** + * omap_calcuate_ecc - Generate non-inverted ECC bytes. + * @mtd: MTD device structure + * @dat: The pointer to data on which ecc is computed + * @ecc_code: The ecc_code buffer + * + * Using noninverted ECC can be considered ugly since writing a blank + * page ie. padding will clear the ECC bytes. This is no problem as long + * nobody is trying to write data on the seemingly unused page. Reading + * an erased page will produce an ECC mismatch between generated and read + * ECC bytes that has to be dealt with separately. + */ +static int omap_calculate_ecc(struct mtd_info *mtd, const u_char *dat, + u_char *ecc_code) +{ + struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, + mtd); + unsigned long val = 0x0; + unsigned long reg; + + /* Start Reading from HW ECC1_Result = 0x200 */ + reg = (unsigned long)(info->gpmc_baseaddr + GPMC_ECC1_RESULT); + val = __raw_readl(reg); + *ecc_code++ = val; /* P128e, ..., P1e */ + *ecc_code++ = val >> 16; /* P128o, ..., P1o */ + /* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */ + *ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0); + reg += 4; + + return 0; +} + +/** + * omap_enable_hwecc - This function enables the hardware ecc functionality + * @mtd: MTD device structure + * @mode: Read/Write mode + */ +static void omap_enable_hwecc(struct mtd_info *mtd, int mode) +{ + struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, + mtd); + struct nand_chip *chip = mtd->priv; + unsigned int dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0; + unsigned long val = __raw_readl(info->gpmc_baseaddr + GPMC_ECC_CONFIG); + + switch (mode) { + case NAND_ECC_READ: + __raw_writel(0x101, info->gpmc_baseaddr + GPMC_ECC_CONTROL); + /* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */ + val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1); + break; + case NAND_ECC_READSYN: + __raw_writel(0x100, info->gpmc_baseaddr + GPMC_ECC_CONTROL); + /* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */ + val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1); + break; + case NAND_ECC_WRITE: + __raw_writel(0x101, info->gpmc_baseaddr + GPMC_ECC_CONTROL); + /* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */ + val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1); + break; + default: + DEBUG(MTD_DEBUG_LEVEL0, "Error: Unrecognized Mode[%d]!\n", + mode); + break; + } + + __raw_writel(val, info->gpmc_baseaddr + GPMC_ECC_CONFIG); +} +#endif + +/** + * omap_wait - wait until the command is done + * @mtd: MTD device structure + * @chip: NAND Chip structure + * + * Wait function is called during Program and erase operations and + * the way it is called from MTD layer, we should wait till the NAND + * chip is ready after the programming/erase operation has completed. + * + * Erase can take up to 400ms and program up to 20ms according to + * general NAND and SmartMedia specs + */ +static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip) +{ + struct nand_chip *this = mtd->priv; + struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, + mtd); + unsigned long timeo = jiffies; + int status, state = this->state; + + if (state == FL_ERASING) + timeo += (HZ * 400) / 1000; + else + timeo += (HZ * 20) / 1000; + + this->IO_ADDR_W = (void *) info->gpmc_cs_baseaddr + + GPMC_CS_NAND_COMMAND; + this->IO_ADDR_R = (void *) info->gpmc_cs_baseaddr + GPMC_CS_NAND_DATA; + + __raw_writeb(NAND_CMD_STATUS & 0xFF, this->IO_ADDR_W); + + while (time_before(jiffies, timeo)) { + status = __raw_readb(this->IO_ADDR_R); + if (!(status & 0x40)) + break; + } + return status; +} + +/** + * omap_dev_ready - calls the platform specific dev_ready function + * @mtd: MTD device structure + */ +static int omap_dev_ready(struct mtd_info *mtd) +{ + struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, + mtd); + unsigned int val = __raw_readl(info->gpmc_baseaddr + GPMC_IRQ_STATUS); + + if ((val & 0x100) == 0x100) { + /* Clear IRQ Interrupt */ + val |= 0x100; + val &= ~(0x0); + __raw_writel(val, info->gpmc_baseaddr + GPMC_IRQ_STATUS); + } else { + unsigned int cnt = 0; + while (cnt++ < 0x1FF) { + if ((val & 0x100) == 0x100) + return 0; + val = __raw_readl(info->gpmc_baseaddr + + GPMC_IRQ_STATUS); + } + } + + return 1; +} + +static int __devinit omap_nand_probe(struct platform_device *pdev) +{ + struct omap_nand_info *info; + struct omap_nand_platform_data *pdata; + int err; + unsigned long val; + + + pdata = pdev->dev.platform_data; + if (pdata == NULL) { + dev_err(&pdev->dev, "platform data missing\n"); + return -ENODEV; + } + + info = kzalloc(sizeof(struct omap_nand_info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + platform_set_drvdata(pdev, info); + + spin_lock_init(&info->controller.lock); + init_waitqueue_head(&info->controller.wq); + + info->pdev = pdev; + + info->gpmc_cs = pdata->cs; + info->gpmc_baseaddr = pdata->gpmc_baseaddr; + info->gpmc_cs_baseaddr = pdata->gpmc_cs_baseaddr; + + info->mtd.priv = &info->nand; + info->mtd.name = dev_name(&pdev->dev); + info->mtd.owner = THIS_MODULE; + + err = gpmc_cs_request(info->gpmc_cs, NAND_IO_SIZE, &info->phys_base); + if (err < 0) { + dev_err(&pdev->dev, "Cannot request GPMC CS\n"); + goto out_free_info; + } + + /* Enable RD PIN Monitoring Reg */ + if (pdata->dev_ready) { + val = gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG1); + val |= WR_RD_PIN_MONITORING; + gpmc_cs_write_reg(info->gpmc_cs, GPMC_CS_CONFIG1, val); + } + + val = gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG7); + val &= ~(0xf << 8); + val |= (0xc & 0xf) << 8; + gpmc_cs_write_reg(info->gpmc_cs, GPMC_CS_CONFIG7, val); + + /* NAND write protect off */ + omap_nand_wp(&info->mtd, NAND_WP_OFF); + + if (!request_mem_region(info->phys_base, NAND_IO_SIZE, + pdev->dev.driver->name)) { + err = -EBUSY; + goto out_free_cs; + } + + info->nand.IO_ADDR_R = ioremap(info->phys_base, NAND_IO_SIZE); + if (!info->nand.IO_ADDR_R) { + err = -ENOMEM; + goto out_release_mem_region; + } + info->nand.controller = &info->controller; + + info->nand.IO_ADDR_W = info->nand.IO_ADDR_R; + info->nand.cmd_ctrl = omap_hwcontrol; + + /* REVISIT: only supports 16-bit NAND flash */ + + info->nand.read_buf = omap_read_buf16; + info->nand.write_buf = omap_write_buf16; + info->nand.verify_buf = omap_verify_buf; + + /* + * If RDY/BSY line is connected to OMAP then use the omap ready + * funcrtion and the generic nand_wait function which reads the status + * register after monitoring the RDY/BSY line.Otherwise use a standard + * chip delay which is slightly more than tR (AC Timing) of the NAND + * device and read status register until you get a failure or success + */ + if (pdata->dev_ready) { + info->nand.dev_ready = omap_dev_ready; + info->nand.chip_delay = 0; + } else { + info->nand.waitfunc = omap_wait; + info->nand.chip_delay = 50; + } + + info->nand.options |= NAND_SKIP_BBTSCAN; + if ((gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG1) & 0x3000) + == 0x1000) + info->nand.options |= NAND_BUSWIDTH_16; + +#ifdef CONFIG_MTD_NAND_OMAP_HWECC + info->nand.ecc.bytes = 3; + info->nand.ecc.size = 512; + info->nand.ecc.calculate = omap_calculate_ecc; + info->nand.ecc.hwctl = omap_enable_hwecc; + info->nand.ecc.correct = omap_correct_data; + info->nand.ecc.mode = NAND_ECC_HW; + + /* init HW ECC */ + omap_hwecc_init(&info->mtd); +#else + info->nand.ecc.mode = NAND_ECC_SOFT; +#endif + + /* DIP switches on some boards change between 8 and 16 bit + * bus widths for flash. Try the other width if the first try fails. + */ + if (nand_scan(&info->mtd, 1)) { + info->nand.options ^= NAND_BUSWIDTH_16; + if (nand_scan(&info->mtd, 1)) { + err = -ENXIO; + goto out_release_mem_region; + } + } + +#ifdef CONFIG_MTD_PARTITIONS + err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0); + if (err > 0) + add_mtd_partitions(&info->mtd, info->parts, err); + else if (pdata->parts) + add_mtd_partitions(&info->mtd, pdata->parts, pdata->nr_parts); + else +#endif + add_mtd_device(&info->mtd); + + platform_set_drvdata(pdev, &info->mtd); + + return 0; + +out_release_mem_region: + release_mem_region(info->phys_base, NAND_IO_SIZE); +out_free_cs: + gpmc_cs_free(info->gpmc_cs); +out_free_info: + kfree(info); + + return err; +} + +static int omap_nand_remove(struct platform_device *pdev) +{ + struct mtd_info *mtd = platform_get_drvdata(pdev); + struct omap_nand_info *info = mtd->priv; + + platform_set_drvdata(pdev, NULL); + /* Release NAND device, its internal structures and partitions */ + nand_release(&info->mtd); + iounmap(info->nand.IO_ADDR_R); + kfree(&info->mtd); + return 0; +} + +static struct platform_driver omap_nand_driver = { + .probe = omap_nand_probe, + .remove = omap_nand_remove, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init omap_nand_init(void) +{ + printk(KERN_INFO "%s driver initializing\n", DRIVER_NAME); + return platform_driver_register(&omap_nand_driver); +} + +static void __exit omap_nand_exit(void) +{ + platform_driver_unregister(&omap_nand_driver); +} + +module_init(omap_nand_init); +module_exit(omap_nand_exit); + +MODULE_ALIAS(DRIVER_NAME); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Glue layer for NAND flash on TI OMAP boards"); diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c index c2dfd3ea353d..7ad972229db4 100644 --- a/drivers/mtd/nand/orion_nand.c +++ b/drivers/mtd/nand/orion_nand.c @@ -47,6 +47,28 @@ static void orion_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl writeb(cmd, nc->IO_ADDR_W + offs); } +static void orion_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) +{ + struct nand_chip *chip = mtd->priv; + void __iomem *io_base = chip->IO_ADDR_R; + uint64_t *buf64; + int i = 0; + + while (len && (unsigned long)buf & 7) { + *buf++ = readb(io_base); + len--; + } + buf64 = (uint64_t *)buf; + while (i < len/8) { + uint64_t x; + asm ("ldrd\t%0, [%1]" : "=r" (x) : "r" (io_base)); + buf64[i++] = x; + } + i *= 8; + while (i < len) + buf[i++] = readb(io_base); +} + static int __init orion_nand_probe(struct platform_device *pdev) { struct mtd_info *mtd; @@ -83,6 +105,7 @@ static int __init orion_nand_probe(struct platform_device *pdev) nc->priv = board; nc->IO_ADDR_R = nc->IO_ADDR_W = io_base; nc->cmd_ctrl = orion_nand_cmd_ctrl; + nc->read_buf = orion_nand_read_buf; nc->ecc.mode = NAND_ECC_SOFT; if (board->chip_delay) diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c index 86e1d08eee00..4e16c6f5bdd5 100644 --- a/drivers/mtd/nand/plat_nand.c +++ b/drivers/mtd/nand/plat_nand.c @@ -61,6 +61,8 @@ static int __devinit plat_nand_probe(struct platform_device *pdev) data->chip.cmd_ctrl = pdata->ctrl.cmd_ctrl; data->chip.dev_ready = pdata->ctrl.dev_ready; data->chip.select_chip = pdata->ctrl.select_chip; + data->chip.write_buf = pdata->ctrl.write_buf; + data->chip.read_buf = pdata->ctrl.read_buf; data->chip.chip_delay = pdata->chip.chip_delay; data->chip.options |= pdata->chip.options; @@ -70,6 +72,13 @@ static int __devinit plat_nand_probe(struct platform_device *pdev) platform_set_drvdata(pdev, data); + /* Handle any platform specific setup */ + if (pdata->ctrl.probe) { + res = pdata->ctrl.probe(pdev); + if (res) + goto out; + } + /* Scan to find existance of the device */ if (nand_scan(&data->mtd, 1)) { res = -ENXIO; @@ -86,6 +95,8 @@ static int __devinit plat_nand_probe(struct platform_device *pdev) return 0; } } + if (pdata->chip.set_parts) + pdata->chip.set_parts(data->mtd.size, &pdata->chip); if (pdata->chip.partitions) { data->parts = pdata->chip.partitions; res = add_mtd_partitions(&data->mtd, data->parts, @@ -99,6 +110,8 @@ static int __devinit plat_nand_probe(struct platform_device *pdev) nand_release(&data->mtd); out: + if (pdata->ctrl.remove) + pdata->ctrl.remove(pdev); platform_set_drvdata(pdev, NULL); iounmap(data->io_base); kfree(data); @@ -111,15 +124,15 @@ out: static int __devexit plat_nand_remove(struct platform_device *pdev) { struct plat_nand_data *data = platform_get_drvdata(pdev); -#ifdef CONFIG_MTD_PARTITIONS struct platform_nand_data *pdata = pdev->dev.platform_data; -#endif nand_release(&data->mtd); #ifdef CONFIG_MTD_PARTITIONS if (data->parts && data->parts != pdata->chip.partitions) kfree(data->parts); #endif + if (pdata->ctrl.remove) + pdata->ctrl.remove(pdev); iounmap(data->io_base); kfree(data); @@ -128,7 +141,7 @@ static int __devexit plat_nand_remove(struct platform_device *pdev) static struct platform_driver plat_nand_driver = { .probe = plat_nand_probe, - .remove = plat_nand_remove, + .remove = __devexit_p(plat_nand_remove), .driver = { .name = "gen_nand", .owner = THIS_MODULE, diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index 8e375d5fe231..11dc7e69c4fb 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -74,6 +74,14 @@ static struct nand_ecclayout nand_hw_eccoob = { struct s3c2410_nand_info; +/** + * struct s3c2410_nand_mtd - driver MTD structure + * @mtd: The MTD instance to pass to the MTD layer. + * @chip: The NAND chip information. + * @set: The platform information supplied for this set of NAND chips. + * @info: Link back to the hardware information. + * @scan_res: The result from calling nand_scan_ident(). +*/ struct s3c2410_nand_mtd { struct mtd_info mtd; struct nand_chip chip; @@ -90,6 +98,21 @@ enum s3c_cpu_type { /* overview of the s3c2410 nand state */ +/** + * struct s3c2410_nand_info - NAND controller state. + * @mtds: An array of MTD instances on this controoler. + * @platform: The platform data for this board. + * @device: The platform device we bound to. + * @area: The IO area resource that came from request_mem_region(). + * @clk: The clock resource for this controller. + * @regs: The area mapped for the hardware registers described by @area. + * @sel_reg: Pointer to the register controlling the NAND selection. + * @sel_bit: The bit in @sel_reg to select the NAND chip. + * @mtd_count: The number of MTDs created from this controller. + * @save_sel: The contents of @sel_reg to be saved over suspend. + * @clk_rate: The clock rate from @clk. + * @cpu_type: The exact type of this controller. + */ struct s3c2410_nand_info { /* mtd info */ struct nand_hw_control controller; @@ -145,12 +168,19 @@ static inline int allow_clk_stop(struct s3c2410_nand_info *info) #define NS_IN_KHZ 1000000 +/** + * s3c_nand_calc_rate - calculate timing data. + * @wanted: The cycle time in nanoseconds. + * @clk: The clock rate in kHz. + * @max: The maximum divider value. + * + * Calculate the timing value from the given parameters. + */ static int s3c_nand_calc_rate(int wanted, unsigned long clk, int max) { int result; - result = (wanted * clk) / NS_IN_KHZ; - result++; + result = DIV_ROUND_UP((wanted * clk), NS_IN_KHZ); pr_debug("result %d from %ld, %d\n", result, clk, wanted); @@ -169,13 +199,21 @@ static int s3c_nand_calc_rate(int wanted, unsigned long clk, int max) /* controller setup */ +/** + * s3c2410_nand_setrate - setup controller timing information. + * @info: The controller instance. + * + * Given the information supplied by the platform, calculate and set + * the necessary timing registers in the hardware to generate the + * necessary timing cycles to the hardware. + */ static int s3c2410_nand_setrate(struct s3c2410_nand_info *info) { struct s3c2410_platform_nand *plat = info->platform; int tacls_max = (info->cpu_type == TYPE_S3C2412) ? 8 : 4; int tacls, twrph0, twrph1; unsigned long clkrate = clk_get_rate(info->clk); - unsigned long set, cfg, mask; + unsigned long uninitialized_var(set), cfg, uninitialized_var(mask); unsigned long flags; /* calculate the timing information for the controller */ @@ -215,9 +253,9 @@ static int s3c2410_nand_setrate(struct s3c2410_nand_info *info) case TYPE_S3C2440: case TYPE_S3C2412: - mask = (S3C2410_NFCONF_TACLS(tacls_max - 1) | - S3C2410_NFCONF_TWRPH0(7) | - S3C2410_NFCONF_TWRPH1(7)); + mask = (S3C2440_NFCONF_TACLS(tacls_max - 1) | + S3C2440_NFCONF_TWRPH0(7) | + S3C2440_NFCONF_TWRPH1(7)); set = S3C2440_NFCONF_TACLS(tacls - 1); set |= S3C2440_NFCONF_TWRPH0(twrph0 - 1); @@ -225,14 +263,9 @@ static int s3c2410_nand_setrate(struct s3c2410_nand_info *info) break; default: - /* keep compiler happy */ - mask = 0; - set = 0; BUG(); } - dev_dbg(info->device, "NF_CONF is 0x%lx\n", cfg); - local_irq_save(flags); cfg = readl(info->regs + S3C2410_NFCONF); @@ -242,9 +275,18 @@ static int s3c2410_nand_setrate(struct s3c2410_nand_info *info) local_irq_restore(flags); + dev_dbg(info->device, "NF_CONF is 0x%lx\n", cfg); + return 0; } +/** + * s3c2410_nand_inithw - basic hardware initialisation + * @info: The hardware state. + * + * Do the basic initialisation of the hardware, using s3c2410_nand_setrate() + * to setup the hardware access speeds and set the controller to be enabled. +*/ static int s3c2410_nand_inithw(struct s3c2410_nand_info *info) { int ret; @@ -268,8 +310,19 @@ static int s3c2410_nand_inithw(struct s3c2410_nand_info *info) return 0; } -/* select chip */ - +/** + * s3c2410_nand_select_chip - select the given nand chip + * @mtd: The MTD instance for this chip. + * @chip: The chip number. + * + * This is called by the MTD layer to either select a given chip for the + * @mtd instance, or to indicate that the access has finished and the + * chip can be de-selected. + * + * The routine ensures that the nFCE line is correctly setup, and any + * platform specific selection code is called to route nFCE to the specific + * chip. + */ static void s3c2410_nand_select_chip(struct mtd_info *mtd, int chip) { struct s3c2410_nand_info *info; @@ -530,7 +583,16 @@ static void s3c2410_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) static void s3c2440_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) { struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); - readsl(info->regs + S3C2440_NFDATA, buf, len / 4); + + readsl(info->regs + S3C2440_NFDATA, buf, len >> 2); + + /* cleanup if we've got less than a word to do */ + if (len & 3) { + buf += len & ~3; + + for (; len & 3; len--) + *buf++ = readb(info->regs + S3C2440_NFDATA); + } } static void s3c2410_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) @@ -542,7 +604,16 @@ static void s3c2410_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int static void s3c2440_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) { struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); - writesl(info->regs + S3C2440_NFDATA, buf, len / 4); + + writesl(info->regs + S3C2440_NFDATA, buf, len >> 2); + + /* cleanup any fractional write */ + if (len & 3) { + buf += len & ~3; + + for (; len & 3; len--, buf++) + writeb(*buf, info->regs + S3C2440_NFDATA); + } } /* cpufreq driver support */ @@ -593,7 +664,7 @@ static inline void s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *inf /* device management functions */ -static int s3c2410_nand_remove(struct platform_device *pdev) +static int s3c24xx_nand_remove(struct platform_device *pdev) { struct s3c2410_nand_info *info = to_nand_info(pdev); @@ -645,17 +716,31 @@ static int s3c2410_nand_remove(struct platform_device *pdev) } #ifdef CONFIG_MTD_PARTITIONS +const char *part_probes[] = { "cmdlinepart", NULL }; static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info, struct s3c2410_nand_mtd *mtd, struct s3c2410_nand_set *set) { + struct mtd_partition *part_info; + int nr_part = 0; + if (set == NULL) return add_mtd_device(&mtd->mtd); - if (set->nr_partitions > 0 && set->partitions != NULL) { - return add_mtd_partitions(&mtd->mtd, set->partitions, set->nr_partitions); + if (set->nr_partitions == 0) { + mtd->mtd.name = set->name; + nr_part = parse_mtd_partitions(&mtd->mtd, part_probes, + &part_info, 0); + } else { + if (set->nr_partitions > 0 && set->partitions != NULL) { + nr_part = set->nr_partitions; + part_info = set->partitions; + } } + if (nr_part > 0 && part_info) + return add_mtd_partitions(&mtd->mtd, part_info, nr_part); + return add_mtd_device(&mtd->mtd); } #else @@ -667,11 +752,16 @@ static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info, } #endif -/* s3c2410_nand_init_chip +/** + * s3c2410_nand_init_chip - initialise a single instance of an chip + * @info: The base NAND controller the chip is on. + * @nmtd: The new controller MTD instance to fill in. + * @set: The information passed from the board specific platform data. * - * init a single instance of an chip -*/ - + * Initialise the given @nmtd from the information in @info and @set. This + * readies the structure for use with the MTD layer functions by ensuring + * all pointers are setup and the necessary control routines selected. + */ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, struct s3c2410_nand_mtd *nmtd, struct s3c2410_nand_set *set) @@ -757,14 +847,40 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, if (set->disable_ecc) chip->ecc.mode = NAND_ECC_NONE; + + switch (chip->ecc.mode) { + case NAND_ECC_NONE: + dev_info(info->device, "NAND ECC disabled\n"); + break; + case NAND_ECC_SOFT: + dev_info(info->device, "NAND soft ECC\n"); + break; + case NAND_ECC_HW: + dev_info(info->device, "NAND hardware ECC\n"); + break; + default: + dev_info(info->device, "NAND ECC UNKNOWN\n"); + break; + } + + /* If you use u-boot BBT creation code, specifying this flag will + * let the kernel fish out the BBT from the NAND, and also skip the + * full NAND scan that can take 1/2s or so. Little things... */ + if (set->flash_bbt) + chip->options |= NAND_USE_FLASH_BBT | NAND_SKIP_BBTSCAN; } -/* s3c2410_nand_update_chip +/** + * s3c2410_nand_update_chip - post probe update + * @info: The controller instance. + * @nmtd: The driver version of the MTD instance. * - * post-probe chip update, to change any items, such as the - * layout for large page nand - */ - + * This routine is called after the chip probe has succesfully completed + * and the relevant per-chip information updated. This call ensure that + * we update the internal state accordingly. + * + * The internal state is currently limited to the ECC state information. +*/ static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info, struct s3c2410_nand_mtd *nmtd) { @@ -773,33 +889,33 @@ static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info, dev_dbg(info->device, "chip %p => page shift %d\n", chip, chip->page_shift); - if (hardware_ecc) { + if (chip->ecc.mode != NAND_ECC_HW) + return; + /* change the behaviour depending on wether we are using * the large or small page nand device */ - if (chip->page_shift > 10) { - chip->ecc.size = 256; - chip->ecc.bytes = 3; - } else { - chip->ecc.size = 512; - chip->ecc.bytes = 3; - chip->ecc.layout = &nand_hw_eccoob; - } + if (chip->page_shift > 10) { + chip->ecc.size = 256; + chip->ecc.bytes = 3; + } else { + chip->ecc.size = 512; + chip->ecc.bytes = 3; + chip->ecc.layout = &nand_hw_eccoob; } } -/* s3c2410_nand_probe +/* s3c24xx_nand_probe * * called by device layer when it finds a device matching * one our driver can handled. This code checks to see if * it can allocate all necessary resources then calls the * nand layer to look for devices */ - -static int s3c24xx_nand_probe(struct platform_device *pdev, - enum s3c_cpu_type cpu_type) +static int s3c24xx_nand_probe(struct platform_device *pdev) { struct s3c2410_platform_nand *plat = to_nand_plat(pdev); + enum s3c_cpu_type cpu_type; struct s3c2410_nand_info *info; struct s3c2410_nand_mtd *nmtd; struct s3c2410_nand_set *sets; @@ -809,6 +925,8 @@ static int s3c24xx_nand_probe(struct platform_device *pdev, int nr_sets; int setno; + cpu_type = platform_get_device_id(pdev)->driver_data; + pr_debug("s3c2410_nand_probe(%p)\n", pdev); info = kmalloc(sizeof(*info), GFP_KERNEL); @@ -922,7 +1040,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev, return 0; exit_error: - s3c2410_nand_remove(pdev); + s3c24xx_nand_remove(pdev); if (err == 0) err = -EINVAL; @@ -983,50 +1101,33 @@ static int s3c24xx_nand_resume(struct platform_device *dev) /* driver device registration */ -static int s3c2410_nand_probe(struct platform_device *dev) -{ - return s3c24xx_nand_probe(dev, TYPE_S3C2410); -} - -static int s3c2440_nand_probe(struct platform_device *dev) -{ - return s3c24xx_nand_probe(dev, TYPE_S3C2440); -} - -static int s3c2412_nand_probe(struct platform_device *dev) -{ - return s3c24xx_nand_probe(dev, TYPE_S3C2412); -} - -static struct platform_driver s3c2410_nand_driver = { - .probe = s3c2410_nand_probe, - .remove = s3c2410_nand_remove, - .suspend = s3c24xx_nand_suspend, - .resume = s3c24xx_nand_resume, - .driver = { - .name = "s3c2410-nand", - .owner = THIS_MODULE, +static struct platform_device_id s3c24xx_driver_ids[] = { + { + .name = "s3c2410-nand", + .driver_data = TYPE_S3C2410, + }, { + .name = "s3c2440-nand", + .driver_data = TYPE_S3C2440, + }, { + .name = "s3c2412-nand", + .driver_data = TYPE_S3C2412, + }, { + .name = "s3c6400-nand", + .driver_data = TYPE_S3C2412, /* compatible with 2412 */ }, + { } }; -static struct platform_driver s3c2440_nand_driver = { - .probe = s3c2440_nand_probe, - .remove = s3c2410_nand_remove, - .suspend = s3c24xx_nand_suspend, - .resume = s3c24xx_nand_resume, - .driver = { - .name = "s3c2440-nand", - .owner = THIS_MODULE, - }, -}; +MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids); -static struct platform_driver s3c2412_nand_driver = { - .probe = s3c2412_nand_probe, - .remove = s3c2410_nand_remove, +static struct platform_driver s3c24xx_nand_driver = { + .probe = s3c24xx_nand_probe, + .remove = s3c24xx_nand_remove, .suspend = s3c24xx_nand_suspend, .resume = s3c24xx_nand_resume, + .id_table = s3c24xx_driver_ids, .driver = { - .name = "s3c2412-nand", + .name = "s3c24xx-nand", .owner = THIS_MODULE, }, }; @@ -1035,16 +1136,12 @@ static int __init s3c2410_nand_init(void) { printk("S3C24XX NAND Driver, (c) 2004 Simtec Electronics\n"); - platform_driver_register(&s3c2412_nand_driver); - platform_driver_register(&s3c2440_nand_driver); - return platform_driver_register(&s3c2410_nand_driver); + return platform_driver_register(&s3c24xx_nand_driver); } static void __exit s3c2410_nand_exit(void) { - platform_driver_unregister(&s3c2412_nand_driver); - platform_driver_unregister(&s3c2440_nand_driver); - platform_driver_unregister(&s3c2410_nand_driver); + platform_driver_unregister(&s3c24xx_nand_driver); } module_init(s3c2410_nand_init); @@ -1053,6 +1150,3 @@ module_exit(s3c2410_nand_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); MODULE_DESCRIPTION("S3C24XX MTD NAND driver"); -MODULE_ALIAS("platform:s3c2410-nand"); -MODULE_ALIAS("platform:s3c2412-nand"); -MODULE_ALIAS("platform:s3c2440-nand"); diff --git a/drivers/mtd/nand/txx9ndfmc.c b/drivers/mtd/nand/txx9ndfmc.c index 812479264896..488088eff2ca 100644 --- a/drivers/mtd/nand/txx9ndfmc.c +++ b/drivers/mtd/nand/txx9ndfmc.c @@ -64,7 +64,7 @@ struct txx9ndfmc_priv { struct nand_chip chip; struct mtd_info mtd; int cs; - char mtdname[BUS_ID_SIZE + 2]; + const char *mtdname; }; #define MAX_TXX9NDFMC_DEV 4 @@ -334,16 +334,23 @@ static int __init txx9ndfmc_probe(struct platform_device *dev) if (plat->ch_mask != 1) { txx9_priv->cs = i; - sprintf(txx9_priv->mtdname, "%s.%u", - dev_name(&dev->dev), i); + txx9_priv->mtdname = kasprintf(GFP_KERNEL, "%s.%u", + dev_name(&dev->dev), i); } else { txx9_priv->cs = -1; - strcpy(txx9_priv->mtdname, dev_name(&dev->dev)); + txx9_priv->mtdname = kstrdup(dev_name(&dev->dev), + GFP_KERNEL); + } + if (!txx9_priv->mtdname) { + kfree(txx9_priv); + dev_err(&dev->dev, "Unable to allocate MTD name.\n"); + continue; } if (plat->wide_mask & (1 << i)) chip->options |= NAND_BUSWIDTH_16; if (nand_scan(mtd, 1)) { + kfree(txx9_priv->mtdname); kfree(txx9_priv); continue; } @@ -385,6 +392,7 @@ static int __exit txx9ndfmc_remove(struct platform_device *dev) kfree(drvdata->parts[i]); #endif del_mtd_device(mtd); + kfree(txx9_priv->mtdname); kfree(txx9_priv); } return 0; diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index 6391e3dc8002..38d656b9b2ee 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -565,7 +565,7 @@ int omap2_onenand_rephase(void) NULL, __adjust_timing); } -static void __devexit omap2_onenand_shutdown(struct platform_device *pdev) +static void omap2_onenand_shutdown(struct platform_device *pdev) { struct omap2_onenand *c = dev_get_drvdata(&pdev->dev); @@ -777,7 +777,7 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev) static struct platform_driver omap2_onenand_driver = { .probe = omap2_onenand_probe, - .remove = omap2_onenand_remove, + .remove = __devexit_p(omap2_onenand_remove), .shutdown = omap2_onenand_shutdown, .driver = { .name = DRIVER_NAME, diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index 30d6999e5f9f..6e829095ea9d 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -9,6 +9,10 @@ * auto-placement support, read-while load support, various fixes * Copyright (C) Nokia Corporation, 2007 * + * Vishak G <vishak.g at samsung.com>, Rohit Hagargundgi <h.rohit at samsung.com> + * Flex-OneNAND support + * Copyright (C) Samsung Electronics, 2008 + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -16,6 +20,7 @@ #include <linux/kernel.h> #include <linux/module.h> +#include <linux/moduleparam.h> #include <linux/init.h> #include <linux/sched.h> #include <linux/delay.h> @@ -27,6 +32,38 @@ #include <asm/io.h> +/* Default Flex-OneNAND boundary and lock respectively */ +static int flex_bdry[MAX_DIES * 2] = { -1, 0, -1, 0 }; + +module_param_array(flex_bdry, int, NULL, 0400); +MODULE_PARM_DESC(flex_bdry, "SLC Boundary information for Flex-OneNAND" + "Syntax:flex_bdry=DIE_BDRY,LOCK,..." + "DIE_BDRY: SLC boundary of the die" + "LOCK: Locking information for SLC boundary" + " : 0->Set boundary in unlocked status" + " : 1->Set boundary in locked status"); + +/** + * onenand_oob_128 - oob info for Flex-Onenand with 4KB page + * For now, we expose only 64 out of 80 ecc bytes + */ +static struct nand_ecclayout onenand_oob_128 = { + .eccbytes = 64, + .eccpos = { + 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, + 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, + 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, + 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, + 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, + 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, + 102, 103, 104, 105 + }, + .oobfree = { + {2, 4}, {18, 4}, {34, 4}, {50, 4}, + {66, 4}, {82, 4}, {98, 4}, {114, 4} + } +}; + /** * onenand_oob_64 - oob info for large (2KB) page */ @@ -65,6 +102,14 @@ static const unsigned char ffchars[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 48 */ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 64 */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 80 */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 96 */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 112 */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 128 */ }; /** @@ -171,6 +216,70 @@ static int onenand_buffer_address(int dataram1, int sectors, int count) } /** + * flexonenand_block- For given address return block number + * @param this - OneNAND device structure + * @param addr - Address for which block number is needed + */ +static unsigned flexonenand_block(struct onenand_chip *this, loff_t addr) +{ + unsigned boundary, blk, die = 0; + + if (ONENAND_IS_DDP(this) && addr >= this->diesize[0]) { + die = 1; + addr -= this->diesize[0]; + } + + boundary = this->boundary[die]; + + blk = addr >> (this->erase_shift - 1); + if (blk > boundary) + blk = (blk + boundary + 1) >> 1; + + blk += die ? this->density_mask : 0; + return blk; +} + +inline unsigned onenand_block(struct onenand_chip *this, loff_t addr) +{ + if (!FLEXONENAND(this)) + return addr >> this->erase_shift; + return flexonenand_block(this, addr); +} + +/** + * flexonenand_addr - Return address of the block + * @this: OneNAND device structure + * @block: Block number on Flex-OneNAND + * + * Return address of the block + */ +static loff_t flexonenand_addr(struct onenand_chip *this, int block) +{ + loff_t ofs = 0; + int die = 0, boundary; + + if (ONENAND_IS_DDP(this) && block >= this->density_mask) { + block -= this->density_mask; + die = 1; + ofs = this->diesize[0]; + } + + boundary = this->boundary[die]; + ofs += (loff_t)block << (this->erase_shift - 1); + if (block > (boundary + 1)) + ofs += (loff_t)(block - boundary - 1) << (this->erase_shift - 1); + return ofs; +} + +loff_t onenand_addr(struct onenand_chip *this, int block) +{ + if (!FLEXONENAND(this)) + return (loff_t)block << this->erase_shift; + return flexonenand_addr(this, block); +} +EXPORT_SYMBOL(onenand_addr); + +/** * onenand_get_density - [DEFAULT] Get OneNAND density * @param dev_id OneNAND device ID * @@ -183,6 +292,22 @@ static inline int onenand_get_density(int dev_id) } /** + * flexonenand_region - [Flex-OneNAND] Return erase region of addr + * @param mtd MTD device structure + * @param addr address whose erase region needs to be identified + */ +int flexonenand_region(struct mtd_info *mtd, loff_t addr) +{ + int i; + + for (i = 0; i < mtd->numeraseregions; i++) + if (addr < mtd->eraseregions[i].offset) + break; + return i - 1; +} +EXPORT_SYMBOL(flexonenand_region); + +/** * onenand_command - [DEFAULT] Send command to OneNAND device * @param mtd MTD device structure * @param cmd the command to be sent @@ -207,16 +332,28 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le page = -1; break; + case FLEXONENAND_CMD_PI_ACCESS: + /* addr contains die index */ + block = addr * this->density_mask; + page = -1; + break; + case ONENAND_CMD_ERASE: case ONENAND_CMD_BUFFERRAM: case ONENAND_CMD_OTP_ACCESS: - block = (int) (addr >> this->erase_shift); + block = onenand_block(this, addr); page = -1; break; + case FLEXONENAND_CMD_READ_PI: + cmd = ONENAND_CMD_READ; + block = addr * this->density_mask; + page = 0; + break; + default: - block = (int) (addr >> this->erase_shift); - page = (int) (addr >> this->page_shift); + block = onenand_block(this, addr); + page = (int) (addr - onenand_addr(this, block)) >> this->page_shift; if (ONENAND_IS_2PLANE(this)) { /* Make the even block number */ @@ -236,7 +373,7 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le value = onenand_bufferram_address(this, block); this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2); - if (ONENAND_IS_2PLANE(this)) + if (ONENAND_IS_MLC(this) || ONENAND_IS_2PLANE(this)) /* It is always BufferRAM0 */ ONENAND_SET_BUFFERRAM0(this); else @@ -258,13 +395,18 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le if (page != -1) { /* Now we use page size operation */ - int sectors = 4, count = 4; + int sectors = 0, count = 0; int dataram; switch (cmd) { + case FLEXONENAND_CMD_RECOVER_LSB: case ONENAND_CMD_READ: case ONENAND_CMD_READOOB: - dataram = ONENAND_SET_NEXT_BUFFERRAM(this); + if (ONENAND_IS_MLC(this)) + /* It is always BufferRAM0 */ + dataram = ONENAND_SET_BUFFERRAM0(this); + else + dataram = ONENAND_SET_NEXT_BUFFERRAM(this); break; default: @@ -293,6 +435,30 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le } /** + * onenand_read_ecc - return ecc status + * @param this onenand chip structure + */ +static inline int onenand_read_ecc(struct onenand_chip *this) +{ + int ecc, i, result = 0; + + if (!FLEXONENAND(this)) + return this->read_word(this->base + ONENAND_REG_ECC_STATUS); + + for (i = 0; i < 4; i++) { + ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS + i); + if (likely(!ecc)) + continue; + if (ecc & FLEXONENAND_UNCORRECTABLE_ERROR) + return ONENAND_ECC_2BIT_ALL; + else + result = ONENAND_ECC_1BIT_ALL; + } + + return result; +} + +/** * onenand_wait - [DEFAULT] wait until the command is done * @param mtd MTD device structure * @param state state to select the max. timeout value @@ -331,14 +497,14 @@ static int onenand_wait(struct mtd_info *mtd, int state) * power off recovery (POR) test, it should read ECC status first */ if (interrupt & ONENAND_INT_READ) { - int ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS); + int ecc = onenand_read_ecc(this); if (ecc) { if (ecc & ONENAND_ECC_2BIT_ALL) { printk(KERN_ERR "onenand_wait: ECC error = 0x%04x\n", ecc); mtd->ecc_stats.failed++; return -EBADMSG; } else if (ecc & ONENAND_ECC_1BIT_ALL) { - printk(KERN_INFO "onenand_wait: correctable ECC error = 0x%04x\n", ecc); + printk(KERN_DEBUG "onenand_wait: correctable ECC error = 0x%04x\n", ecc); mtd->ecc_stats.corrected++; } } @@ -656,7 +822,7 @@ static int onenand_check_bufferram(struct mtd_info *mtd, loff_t addr) if (found && ONENAND_IS_DDP(this)) { /* Select DataRAM for DDP */ - int block = (int) (addr >> this->erase_shift); + int block = onenand_block(this, addr); int value = onenand_bufferram_address(this, block); this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2); } @@ -816,6 +982,149 @@ static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf, int col } /** + * onenand_recover_lsb - [Flex-OneNAND] Recover LSB page data + * @param mtd MTD device structure + * @param addr address to recover + * @param status return value from onenand_wait / onenand_bbt_wait + * + * MLC NAND Flash cell has paired pages - LSB page and MSB page. LSB page has + * lower page address and MSB page has higher page address in paired pages. + * If power off occurs during MSB page program, the paired LSB page data can + * become corrupt. LSB page recovery read is a way to read LSB page though page + * data are corrupted. When uncorrectable error occurs as a result of LSB page + * read after power up, issue LSB page recovery read. + */ +static int onenand_recover_lsb(struct mtd_info *mtd, loff_t addr, int status) +{ + struct onenand_chip *this = mtd->priv; + int i; + + /* Recovery is only for Flex-OneNAND */ + if (!FLEXONENAND(this)) + return status; + + /* check if we failed due to uncorrectable error */ + if (status != -EBADMSG && status != ONENAND_BBT_READ_ECC_ERROR) + return status; + + /* check if address lies in MLC region */ + i = flexonenand_region(mtd, addr); + if (mtd->eraseregions[i].erasesize < (1 << this->erase_shift)) + return status; + + /* We are attempting to reread, so decrement stats.failed + * which was incremented by onenand_wait due to read failure + */ + printk(KERN_INFO "onenand_recover_lsb: Attempting to recover from uncorrectable read\n"); + mtd->ecc_stats.failed--; + + /* Issue the LSB page recovery command */ + this->command(mtd, FLEXONENAND_CMD_RECOVER_LSB, addr, this->writesize); + return this->wait(mtd, FL_READING); +} + +/** + * onenand_mlc_read_ops_nolock - MLC OneNAND read main and/or out-of-band + * @param mtd MTD device structure + * @param from offset to read from + * @param ops: oob operation description structure + * + * MLC OneNAND / Flex-OneNAND has 4KB page size and 4KB dataram. + * So, read-while-load is not present. + */ +static int onenand_mlc_read_ops_nolock(struct mtd_info *mtd, loff_t from, + struct mtd_oob_ops *ops) +{ + struct onenand_chip *this = mtd->priv; + struct mtd_ecc_stats stats; + size_t len = ops->len; + size_t ooblen = ops->ooblen; + u_char *buf = ops->datbuf; + u_char *oobbuf = ops->oobbuf; + int read = 0, column, thislen; + int oobread = 0, oobcolumn, thisooblen, oobsize; + int ret = 0; + int writesize = this->writesize; + + DEBUG(MTD_DEBUG_LEVEL3, "onenand_mlc_read_ops_nolock: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len); + + if (ops->mode == MTD_OOB_AUTO) + oobsize = this->ecclayout->oobavail; + else + oobsize = mtd->oobsize; + + oobcolumn = from & (mtd->oobsize - 1); + + /* Do not allow reads past end of device */ + if (from + len > mtd->size) { + printk(KERN_ERR "onenand_mlc_read_ops_nolock: Attempt read beyond end of device\n"); + ops->retlen = 0; + ops->oobretlen = 0; + return -EINVAL; + } + + stats = mtd->ecc_stats; + + while (read < len) { + cond_resched(); + + thislen = min_t(int, writesize, len - read); + + column = from & (writesize - 1); + if (column + thislen > writesize) + thislen = writesize - column; + + if (!onenand_check_bufferram(mtd, from)) { + this->command(mtd, ONENAND_CMD_READ, from, writesize); + + ret = this->wait(mtd, FL_READING); + if (unlikely(ret)) + ret = onenand_recover_lsb(mtd, from, ret); + onenand_update_bufferram(mtd, from, !ret); + if (ret == -EBADMSG) + ret = 0; + } + + this->read_bufferram(mtd, ONENAND_DATARAM, buf, column, thislen); + if (oobbuf) { + thisooblen = oobsize - oobcolumn; + thisooblen = min_t(int, thisooblen, ooblen - oobread); + + if (ops->mode == MTD_OOB_AUTO) + onenand_transfer_auto_oob(mtd, oobbuf, oobcolumn, thisooblen); + else + this->read_bufferram(mtd, ONENAND_SPARERAM, oobbuf, oobcolumn, thisooblen); + oobread += thisooblen; + oobbuf += thisooblen; + oobcolumn = 0; + } + + read += thislen; + if (read == len) + break; + + from += thislen; + buf += thislen; + } + + /* + * Return success, if no ECC failures, else -EBADMSG + * fs driver will take care of that, because + * retlen == desired len and result == -EBADMSG + */ + ops->retlen = read; + ops->oobretlen = oobread; + + if (ret) + return ret; + + if (mtd->ecc_stats.failed - stats.failed) + return -EBADMSG; + + return mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0; +} + +/** * onenand_read_ops_nolock - [OneNAND Interface] OneNAND read main and/or out-of-band * @param mtd MTD device structure * @param from offset to read from @@ -962,7 +1271,7 @@ static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from, size_t len = ops->ooblen; mtd_oob_mode_t mode = ops->mode; u_char *buf = ops->oobbuf; - int ret = 0; + int ret = 0, readcmd; from += ops->ooboffs; @@ -993,17 +1302,22 @@ static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from, stats = mtd->ecc_stats; + readcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB; + while (read < len) { cond_resched(); thislen = oobsize - column; thislen = min_t(int, thislen, len); - this->command(mtd, ONENAND_CMD_READOOB, from, mtd->oobsize); + this->command(mtd, readcmd, from, mtd->oobsize); onenand_update_bufferram(mtd, from, 0); ret = this->wait(mtd, FL_READING); + if (unlikely(ret)) + ret = onenand_recover_lsb(mtd, from, ret); + if (ret && ret != -EBADMSG) { printk(KERN_ERR "onenand_read_oob_nolock: read failed = 0x%x\n", ret); break; @@ -1053,6 +1367,7 @@ static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from, static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) { + struct onenand_chip *this = mtd->priv; struct mtd_oob_ops ops = { .len = len, .ooblen = 0, @@ -1062,7 +1377,9 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len, int ret; onenand_get_device(mtd, FL_READING); - ret = onenand_read_ops_nolock(mtd, from, &ops); + ret = ONENAND_IS_MLC(this) ? + onenand_mlc_read_ops_nolock(mtd, from, &ops) : + onenand_read_ops_nolock(mtd, from, &ops); onenand_release_device(mtd); *retlen = ops.retlen; @@ -1080,6 +1397,7 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len, static int onenand_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops) { + struct onenand_chip *this = mtd->priv; int ret; switch (ops->mode) { @@ -1094,7 +1412,9 @@ static int onenand_read_oob(struct mtd_info *mtd, loff_t from, onenand_get_device(mtd, FL_READING); if (ops->datbuf) - ret = onenand_read_ops_nolock(mtd, from, ops); + ret = ONENAND_IS_MLC(this) ? + onenand_mlc_read_ops_nolock(mtd, from, ops) : + onenand_read_ops_nolock(mtd, from, ops); else ret = onenand_read_oob_nolock(mtd, from, ops); onenand_release_device(mtd); @@ -1128,11 +1448,11 @@ static int onenand_bbt_wait(struct mtd_info *mtd, int state) ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS); if (interrupt & ONENAND_INT_READ) { - int ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS); + int ecc = onenand_read_ecc(this); if (ecc & ONENAND_ECC_2BIT_ALL) { printk(KERN_INFO "onenand_bbt_wait: ecc error = 0x%04x" ", controller error 0x%04x\n", ecc, ctrl); - return ONENAND_BBT_READ_ERROR; + return ONENAND_BBT_READ_ECC_ERROR; } } else { printk(KERN_ERR "onenand_bbt_wait: read timeout!" @@ -1163,7 +1483,7 @@ int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from, { struct onenand_chip *this = mtd->priv; int read = 0, thislen, column; - int ret = 0; + int ret = 0, readcmd; size_t len = ops->ooblen; u_char *buf = ops->oobbuf; @@ -1183,17 +1503,22 @@ int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from, column = from & (mtd->oobsize - 1); + readcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB; + while (read < len) { cond_resched(); thislen = mtd->oobsize - column; thislen = min_t(int, thislen, len); - this->command(mtd, ONENAND_CMD_READOOB, from, mtd->oobsize); + this->command(mtd, readcmd, from, mtd->oobsize); onenand_update_bufferram(mtd, from, 0); - ret = onenand_bbt_wait(mtd, FL_READING); + ret = this->bbt_wait(mtd, FL_READING); + if (unlikely(ret)) + ret = onenand_recover_lsb(mtd, from, ret); + if (ret) break; @@ -1230,9 +1555,11 @@ static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to { struct onenand_chip *this = mtd->priv; u_char *oob_buf = this->oob_buf; - int status, i; + int status, i, readcmd; - this->command(mtd, ONENAND_CMD_READOOB, to, mtd->oobsize); + readcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB; + + this->command(mtd, readcmd, to, mtd->oobsize); onenand_update_bufferram(mtd, to, 0); status = this->wait(mtd, FL_READING); if (status) @@ -1633,7 +1960,7 @@ static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to, { struct onenand_chip *this = mtd->priv; int column, ret = 0, oobsize; - int written = 0; + int written = 0, oobcmd; u_char *oobbuf; size_t len = ops->ooblen; const u_char *buf = ops->oobbuf; @@ -1675,6 +2002,8 @@ static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to, oobbuf = this->oob_buf; + oobcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_PROG : ONENAND_CMD_PROGOOB; + /* Loop until all data write */ while (written < len) { int thislen = min_t(int, oobsize, len - written); @@ -1692,7 +2021,14 @@ static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to, memcpy(oobbuf + column, buf, thislen); this->write_bufferram(mtd, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize); - this->command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize); + if (ONENAND_IS_MLC(this)) { + /* Set main area of DataRAM to 0xff*/ + memset(this->page_buf, 0xff, mtd->writesize); + this->write_bufferram(mtd, ONENAND_DATARAM, + this->page_buf, 0, mtd->writesize); + } + + this->command(mtd, oobcmd, to, mtd->oobsize); onenand_update_bufferram(mtd, to, 0); if (ONENAND_IS_2PLANE(this)) { @@ -1815,29 +2151,48 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr) { struct onenand_chip *this = mtd->priv; unsigned int block_size; - loff_t addr; - int len; - int ret = 0; + loff_t addr = instr->addr; + loff_t len = instr->len; + int ret = 0, i; + struct mtd_erase_region_info *region = NULL; + loff_t region_end = 0; DEBUG(MTD_DEBUG_LEVEL3, "onenand_erase: start = 0x%012llx, len = %llu\n", (unsigned long long) instr->addr, (unsigned long long) instr->len); - block_size = (1 << this->erase_shift); - - /* Start address must align on block boundary */ - if (unlikely(instr->addr & (block_size - 1))) { - printk(KERN_ERR "onenand_erase: Unaligned address\n"); + /* Do not allow erase past end of device */ + if (unlikely((len + addr) > mtd->size)) { + printk(KERN_ERR "onenand_erase: Erase past end of device\n"); return -EINVAL; } - /* Length must align on block boundary */ - if (unlikely(instr->len & (block_size - 1))) { - printk(KERN_ERR "onenand_erase: Length not block aligned\n"); - return -EINVAL; + if (FLEXONENAND(this)) { + /* Find the eraseregion of this address */ + i = flexonenand_region(mtd, addr); + region = &mtd->eraseregions[i]; + + block_size = region->erasesize; + region_end = region->offset + region->erasesize * region->numblocks; + + /* Start address within region must align on block boundary. + * Erase region's start offset is always block start address. + */ + if (unlikely((addr - region->offset) & (block_size - 1))) { + printk(KERN_ERR "onenand_erase: Unaligned address\n"); + return -EINVAL; + } + } else { + block_size = 1 << this->erase_shift; + + /* Start address must align on block boundary */ + if (unlikely(addr & (block_size - 1))) { + printk(KERN_ERR "onenand_erase: Unaligned address\n"); + return -EINVAL; + } } - /* Do not allow erase past end of device */ - if (unlikely((instr->len + instr->addr) > mtd->size)) { - printk(KERN_ERR "onenand_erase: Erase past end of device\n"); + /* Length must align on block boundary */ + if (unlikely(len & (block_size - 1))) { + printk(KERN_ERR "onenand_erase: Length not block aligned\n"); return -EINVAL; } @@ -1847,9 +2202,6 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr) onenand_get_device(mtd, FL_ERASING); /* Loop throught the pages */ - len = instr->len; - addr = instr->addr; - instr->state = MTD_ERASING; while (len) { @@ -1869,7 +2221,8 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr) ret = this->wait(mtd, FL_ERASING); /* Check, if it is write protected */ if (ret) { - printk(KERN_ERR "onenand_erase: Failed erase, block %d\n", (unsigned) (addr >> this->erase_shift)); + printk(KERN_ERR "onenand_erase: Failed erase, block %d\n", + onenand_block(this, addr)); instr->state = MTD_ERASE_FAILED; instr->fail_addr = addr; goto erase_exit; @@ -1877,6 +2230,22 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr) len -= block_size; addr += block_size; + + if (addr == region_end) { + if (!len) + break; + region++; + + block_size = region->erasesize; + region_end = region->offset + region->erasesize * region->numblocks; + + if (len & (block_size - 1)) { + /* FIXME: This should be handled at MTD partitioning level. */ + printk(KERN_ERR "onenand_erase: Unaligned address\n"); + goto erase_exit; + } + } + } instr->state = MTD_ERASE_DONE; @@ -1955,13 +2324,17 @@ static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) int block; /* Get block number */ - block = ((int) ofs) >> bbm->bbt_erase_shift; + block = onenand_block(this, ofs); if (bbm->bbt) bbm->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1); /* We write two bytes, so we dont have to mess with 16 bit access */ ofs += mtd->oobsize + (bbm->badblockpos & ~0x01); - return onenand_write_oob_nolock(mtd, ofs, &ops); + /* FIXME : What to do when marking SLC block in partition + * with MLC erasesize? For now, it is not advisable to + * create partitions containing both SLC and MLC regions. + */ + return onenand_write_oob_nolock(mtd, ofs, &ops); } /** @@ -2005,8 +2378,8 @@ static int onenand_do_lock_cmd(struct mtd_info *mtd, loff_t ofs, size_t len, int int start, end, block, value, status; int wp_status_mask; - start = ofs >> this->erase_shift; - end = len >> this->erase_shift; + start = onenand_block(this, ofs); + end = onenand_block(this, ofs + len) - 1; if (cmd == ONENAND_CMD_LOCK) wp_status_mask = ONENAND_WP_LS; @@ -2018,7 +2391,7 @@ static int onenand_do_lock_cmd(struct mtd_info *mtd, loff_t ofs, size_t len, int /* Set start block address */ this->write_word(start, this->base + ONENAND_REG_START_BLOCK_ADDRESS); /* Set end block address */ - this->write_word(start + end - 1, this->base + ONENAND_REG_END_BLOCK_ADDRESS); + this->write_word(end, this->base + ONENAND_REG_END_BLOCK_ADDRESS); /* Write lock command */ this->command(mtd, cmd, 0, 0); @@ -2039,7 +2412,7 @@ static int onenand_do_lock_cmd(struct mtd_info *mtd, loff_t ofs, size_t len, int } /* Block lock scheme */ - for (block = start; block < start + end; block++) { + for (block = start; block < end + 1; block++) { /* Set block address */ value = onenand_block_address(this, block); this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1); @@ -2147,7 +2520,7 @@ static void onenand_unlock_all(struct mtd_info *mtd) { struct onenand_chip *this = mtd->priv; loff_t ofs = 0; - size_t len = this->chipsize; + loff_t len = mtd->size; if (this->options & ONENAND_HAS_UNLOCK_ALL) { /* Set start block address */ @@ -2163,12 +2536,16 @@ static void onenand_unlock_all(struct mtd_info *mtd) & ONENAND_CTRL_ONGO) continue; + /* Don't check lock status */ + if (this->options & ONENAND_SKIP_UNLOCK_CHECK) + return; + /* Check lock status */ if (onenand_check_lock_status(this)) return; /* Workaround for all block unlock in DDP */ - if (ONENAND_IS_DDP(this)) { + if (ONENAND_IS_DDP(this) && !FLEXONENAND(this)) { /* All blocks on another chip */ ofs = this->chipsize >> 1; len = this->chipsize >> 1; @@ -2210,7 +2587,9 @@ static int do_otp_read(struct mtd_info *mtd, loff_t from, size_t len, this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0); this->wait(mtd, FL_OTPING); - ret = onenand_read_ops_nolock(mtd, from, &ops); + ret = ONENAND_IS_MLC(this) ? + onenand_mlc_read_ops_nolock(mtd, from, &ops) : + onenand_read_ops_nolock(mtd, from, &ops); /* Exit OTP access mode */ this->command(mtd, ONENAND_CMD_RESET, 0, 0); @@ -2277,21 +2656,32 @@ static int do_otp_lock(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) { struct onenand_chip *this = mtd->priv; - struct mtd_oob_ops ops = { - .mode = MTD_OOB_PLACE, - .ooblen = len, - .oobbuf = buf, - .ooboffs = 0, - }; + struct mtd_oob_ops ops; int ret; /* Enter OTP access mode */ this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0); this->wait(mtd, FL_OTPING); - ret = onenand_write_oob_nolock(mtd, from, &ops); - - *retlen = ops.oobretlen; + if (FLEXONENAND(this)) { + /* + * For Flex-OneNAND, we write lock mark to 1st word of sector 4 of + * main area of page 49. + */ + ops.len = mtd->writesize; + ops.ooblen = 0; + ops.datbuf = buf; + ops.oobbuf = NULL; + ret = onenand_write_ops_nolock(mtd, mtd->writesize * 49, &ops); + *retlen = ops.retlen; + } else { + ops.mode = MTD_OOB_PLACE; + ops.ooblen = len; + ops.oobbuf = buf; + ops.ooboffs = 0; + ret = onenand_write_oob_nolock(mtd, from, &ops); + *retlen = ops.oobretlen; + } /* Exit OTP access mode */ this->command(mtd, ONENAND_CMD_RESET, 0, 0); @@ -2475,27 +2865,34 @@ static int onenand_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len) { struct onenand_chip *this = mtd->priv; - u_char *oob_buf = this->oob_buf; + u_char *buf = FLEXONENAND(this) ? this->page_buf : this->oob_buf; size_t retlen; int ret; - memset(oob_buf, 0xff, mtd->oobsize); + memset(buf, 0xff, FLEXONENAND(this) ? this->writesize + : mtd->oobsize); /* * Note: OTP lock operation * OTP block : 0xXXFC * 1st block : 0xXXF3 (If chip support) * Both : 0xXXF0 (If chip support) */ - oob_buf[ONENAND_OTP_LOCK_OFFSET] = 0xFC; + if (FLEXONENAND(this)) + buf[FLEXONENAND_OTP_LOCK_OFFSET] = 0xFC; + else + buf[ONENAND_OTP_LOCK_OFFSET] = 0xFC; /* * Write lock mark to 8th word of sector0 of page0 of the spare0. * We write 16 bytes spare area instead of 2 bytes. + * For Flex-OneNAND, we write lock mark to 1st word of sector 4 of + * main area of page 49. */ + from = 0; - len = 16; + len = FLEXONENAND(this) ? mtd->writesize : 16; - ret = onenand_otp_walk(mtd, from, len, &retlen, oob_buf, do_otp_lock, MTD_OTP_USER); + ret = onenand_otp_walk(mtd, from, len, &retlen, buf, do_otp_lock, MTD_OTP_USER); return ret ? : retlen; } @@ -2542,6 +2939,14 @@ static void onenand_check_features(struct mtd_info *mtd) break; } + if (ONENAND_IS_MLC(this)) + this->options &= ~ONENAND_HAS_2PLANE; + + if (FLEXONENAND(this)) { + this->options &= ~ONENAND_HAS_CONT_LOCK; + this->options |= ONENAND_HAS_UNLOCK_ALL; + } + if (this->options & ONENAND_HAS_CONT_LOCK) printk(KERN_DEBUG "Lock scheme is Continuous Lock\n"); if (this->options & ONENAND_HAS_UNLOCK_ALL) @@ -2559,14 +2964,16 @@ static void onenand_check_features(struct mtd_info *mtd) */ static void onenand_print_device_info(int device, int version) { - int vcc, demuxed, ddp, density; + int vcc, demuxed, ddp, density, flexonenand; vcc = device & ONENAND_DEVICE_VCC_MASK; demuxed = device & ONENAND_DEVICE_IS_DEMUX; ddp = device & ONENAND_DEVICE_IS_DDP; density = onenand_get_density(device); - printk(KERN_INFO "%sOneNAND%s %dMB %sV 16-bit (0x%02x)\n", - demuxed ? "" : "Muxed ", + flexonenand = device & DEVICE_IS_FLEXONENAND; + printk(KERN_INFO "%s%sOneNAND%s %dMB %sV 16-bit (0x%02x)\n", + demuxed ? "" : "Muxed ", + flexonenand ? "Flex-" : "", ddp ? "(DDP)" : "", (16 << density), vcc ? "2.65/3.3" : "1.8", @@ -2576,6 +2983,7 @@ static void onenand_print_device_info(int device, int version) static const struct onenand_manufacturers onenand_manuf_ids[] = { {ONENAND_MFR_SAMSUNG, "Samsung"}, + {ONENAND_MFR_NUMONYX, "Numonyx"}, }; /** @@ -2605,6 +3013,261 @@ static int onenand_check_maf(int manuf) } /** +* flexonenand_get_boundary - Reads the SLC boundary +* @param onenand_info - onenand info structure +**/ +static int flexonenand_get_boundary(struct mtd_info *mtd) +{ + struct onenand_chip *this = mtd->priv; + unsigned die, bdry; + int ret, syscfg, locked; + + /* Disable ECC */ + syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1); + this->write_word((syscfg | 0x0100), this->base + ONENAND_REG_SYS_CFG1); + + for (die = 0; die < this->dies; die++) { + this->command(mtd, FLEXONENAND_CMD_PI_ACCESS, die, 0); + this->wait(mtd, FL_SYNCING); + + this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0); + ret = this->wait(mtd, FL_READING); + + bdry = this->read_word(this->base + ONENAND_DATARAM); + if ((bdry >> FLEXONENAND_PI_UNLOCK_SHIFT) == 3) + locked = 0; + else + locked = 1; + this->boundary[die] = bdry & FLEXONENAND_PI_MASK; + + this->command(mtd, ONENAND_CMD_RESET, 0, 0); + ret = this->wait(mtd, FL_RESETING); + + printk(KERN_INFO "Die %d boundary: %d%s\n", die, + this->boundary[die], locked ? "(Locked)" : "(Unlocked)"); + } + + /* Enable ECC */ + this->write_word(syscfg, this->base + ONENAND_REG_SYS_CFG1); + return 0; +} + +/** + * flexonenand_get_size - Fill up fields in onenand_chip and mtd_info + * boundary[], diesize[], mtd->size, mtd->erasesize + * @param mtd - MTD device structure + */ +static void flexonenand_get_size(struct mtd_info *mtd) +{ + struct onenand_chip *this = mtd->priv; + int die, i, eraseshift, density; + int blksperdie, maxbdry; + loff_t ofs; + + density = onenand_get_density(this->device_id); + blksperdie = ((loff_t)(16 << density) << 20) >> (this->erase_shift); + blksperdie >>= ONENAND_IS_DDP(this) ? 1 : 0; + maxbdry = blksperdie - 1; + eraseshift = this->erase_shift - 1; + + mtd->numeraseregions = this->dies << 1; + + /* This fills up the device boundary */ + flexonenand_get_boundary(mtd); + die = ofs = 0; + i = -1; + for (; die < this->dies; die++) { + if (!die || this->boundary[die-1] != maxbdry) { + i++; + mtd->eraseregions[i].offset = ofs; + mtd->eraseregions[i].erasesize = 1 << eraseshift; + mtd->eraseregions[i].numblocks = + this->boundary[die] + 1; + ofs += mtd->eraseregions[i].numblocks << eraseshift; + eraseshift++; + } else { + mtd->numeraseregions -= 1; + mtd->eraseregions[i].numblocks += + this->boundary[die] + 1; + ofs += (this->boundary[die] + 1) << (eraseshift - 1); + } + if (this->boundary[die] != maxbdry) { + i++; + mtd->eraseregions[i].offset = ofs; + mtd->eraseregions[i].erasesize = 1 << eraseshift; + mtd->eraseregions[i].numblocks = maxbdry ^ + this->boundary[die]; + ofs += mtd->eraseregions[i].numblocks << eraseshift; + eraseshift--; + } else + mtd->numeraseregions -= 1; + } + + /* Expose MLC erase size except when all blocks are SLC */ + mtd->erasesize = 1 << this->erase_shift; + if (mtd->numeraseregions == 1) + mtd->erasesize >>= 1; + + printk(KERN_INFO "Device has %d eraseregions\n", mtd->numeraseregions); + for (i = 0; i < mtd->numeraseregions; i++) + printk(KERN_INFO "[offset: 0x%08x, erasesize: 0x%05x," + " numblocks: %04u]\n", + (unsigned int) mtd->eraseregions[i].offset, + mtd->eraseregions[i].erasesize, + mtd->eraseregions[i].numblocks); + + for (die = 0, mtd->size = 0; die < this->dies; die++) { + this->diesize[die] = (loff_t)blksperdie << this->erase_shift; + this->diesize[die] -= (loff_t)(this->boundary[die] + 1) + << (this->erase_shift - 1); + mtd->size += this->diesize[die]; + } +} + +/** + * flexonenand_check_blocks_erased - Check if blocks are erased + * @param mtd_info - mtd info structure + * @param start - first erase block to check + * @param end - last erase block to check + * + * Converting an unerased block from MLC to SLC + * causes byte values to change. Since both data and its ECC + * have changed, reads on the block give uncorrectable error. + * This might lead to the block being detected as bad. + * + * Avoid this by ensuring that the block to be converted is + * erased. + */ +static int flexonenand_check_blocks_erased(struct mtd_info *mtd, int start, int end) +{ + struct onenand_chip *this = mtd->priv; + int i, ret; + int block; + struct mtd_oob_ops ops = { + .mode = MTD_OOB_PLACE, + .ooboffs = 0, + .ooblen = mtd->oobsize, + .datbuf = NULL, + .oobbuf = this->oob_buf, + }; + loff_t addr; + + printk(KERN_DEBUG "Check blocks from %d to %d\n", start, end); + + for (block = start; block <= end; block++) { + addr = flexonenand_addr(this, block); + if (onenand_block_isbad_nolock(mtd, addr, 0)) + continue; + + /* + * Since main area write results in ECC write to spare, + * it is sufficient to check only ECC bytes for change. + */ + ret = onenand_read_oob_nolock(mtd, addr, &ops); + if (ret) + return ret; + + for (i = 0; i < mtd->oobsize; i++) + if (this->oob_buf[i] != 0xff) + break; + + if (i != mtd->oobsize) { + printk(KERN_WARNING "Block %d not erased.\n", block); + return 1; + } + } + + return 0; +} + +/** + * flexonenand_set_boundary - Writes the SLC boundary + * @param mtd - mtd info structure + */ +int flexonenand_set_boundary(struct mtd_info *mtd, int die, + int boundary, int lock) +{ + struct onenand_chip *this = mtd->priv; + int ret, density, blksperdie, old, new, thisboundary; + loff_t addr; + + /* Change only once for SDP Flex-OneNAND */ + if (die && (!ONENAND_IS_DDP(this))) + return 0; + + /* boundary value of -1 indicates no required change */ + if (boundary < 0 || boundary == this->boundary[die]) + return 0; + + density = onenand_get_density(this->device_id); + blksperdie = ((16 << density) << 20) >> this->erase_shift; + blksperdie >>= ONENAND_IS_DDP(this) ? 1 : 0; + + if (boundary >= blksperdie) { + printk(KERN_ERR "flexonenand_set_boundary: Invalid boundary value. " + "Boundary not changed.\n"); + return -EINVAL; + } + + /* Check if converting blocks are erased */ + old = this->boundary[die] + (die * this->density_mask); + new = boundary + (die * this->density_mask); + ret = flexonenand_check_blocks_erased(mtd, min(old, new) + 1, max(old, new)); + if (ret) { + printk(KERN_ERR "flexonenand_set_boundary: Please erase blocks before boundary change\n"); + return ret; + } + + this->command(mtd, FLEXONENAND_CMD_PI_ACCESS, die, 0); + this->wait(mtd, FL_SYNCING); + + /* Check is boundary is locked */ + this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0); + ret = this->wait(mtd, FL_READING); + + thisboundary = this->read_word(this->base + ONENAND_DATARAM); + if ((thisboundary >> FLEXONENAND_PI_UNLOCK_SHIFT) != 3) { + printk(KERN_ERR "flexonenand_set_boundary: boundary locked\n"); + ret = 1; + goto out; + } + + printk(KERN_INFO "flexonenand_set_boundary: Changing die %d boundary: %d%s\n", + die, boundary, lock ? "(Locked)" : "(Unlocked)"); + + addr = die ? this->diesize[0] : 0; + + boundary &= FLEXONENAND_PI_MASK; + boundary |= lock ? 0 : (3 << FLEXONENAND_PI_UNLOCK_SHIFT); + + this->command(mtd, ONENAND_CMD_ERASE, addr, 0); + ret = this->wait(mtd, FL_ERASING); + if (ret) { + printk(KERN_ERR "flexonenand_set_boundary: Failed PI erase for Die %d\n", die); + goto out; + } + + this->write_word(boundary, this->base + ONENAND_DATARAM); + this->command(mtd, ONENAND_CMD_PROG, addr, 0); + ret = this->wait(mtd, FL_WRITING); + if (ret) { + printk(KERN_ERR "flexonenand_set_boundary: Failed PI write for Die %d\n", die); + goto out; + } + + this->command(mtd, FLEXONENAND_CMD_PI_UPDATE, die, 0); + ret = this->wait(mtd, FL_WRITING); +out: + this->write_word(ONENAND_CMD_RESET, this->base + ONENAND_REG_COMMAND); + this->wait(mtd, FL_RESETING); + if (!ret) + /* Recalculate device size on boundary change*/ + flexonenand_get_size(mtd); + + return ret; +} + +/** * onenand_probe - [OneNAND Interface] Probe the OneNAND device * @param mtd MTD device structure * @@ -2621,7 +3284,7 @@ static int onenand_probe(struct mtd_info *mtd) /* Save system configuration 1 */ syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1); /* Clear Sync. Burst Read mode to read BootRAM */ - this->write_word((syscfg & ~ONENAND_SYS_CFG1_SYNC_READ), this->base + ONENAND_REG_SYS_CFG1); + this->write_word((syscfg & ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE), this->base + ONENAND_REG_SYS_CFG1); /* Send the command for reading device ID from BootRAM */ this->write_word(ONENAND_CMD_READID, this->base + ONENAND_BOOTRAM); @@ -2646,6 +3309,7 @@ static int onenand_probe(struct mtd_info *mtd) maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID); dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID); ver_id = this->read_word(this->base + ONENAND_REG_VERSION_ID); + this->technology = this->read_word(this->base + ONENAND_REG_TECHNOLOGY); /* Check OneNAND device */ if (maf_id != bram_maf_id || dev_id != bram_dev_id) @@ -2657,29 +3321,55 @@ static int onenand_probe(struct mtd_info *mtd) this->version_id = ver_id; density = onenand_get_density(dev_id); + if (FLEXONENAND(this)) { + this->dies = ONENAND_IS_DDP(this) ? 2 : 1; + /* Maximum possible erase regions */ + mtd->numeraseregions = this->dies << 1; + mtd->eraseregions = kzalloc(sizeof(struct mtd_erase_region_info) + * (this->dies << 1), GFP_KERNEL); + if (!mtd->eraseregions) + return -ENOMEM; + } + + /* + * For Flex-OneNAND, chipsize represents maximum possible device size. + * mtd->size represents the actual device size. + */ this->chipsize = (16 << density) << 20; - /* Set density mask. it is used for DDP */ - if (ONENAND_IS_DDP(this)) - this->density_mask = (1 << (density + 6)); - else - this->density_mask = 0; /* OneNAND page size & block size */ /* The data buffer size is equal to page size */ mtd->writesize = this->read_word(this->base + ONENAND_REG_DATA_BUFFER_SIZE); + /* We use the full BufferRAM */ + if (ONENAND_IS_MLC(this)) + mtd->writesize <<= 1; + mtd->oobsize = mtd->writesize >> 5; /* Pages per a block are always 64 in OneNAND */ mtd->erasesize = mtd->writesize << 6; + /* + * Flex-OneNAND SLC area has 64 pages per block. + * Flex-OneNAND MLC area has 128 pages per block. + * Expose MLC erase size to find erase_shift and page_mask. + */ + if (FLEXONENAND(this)) + mtd->erasesize <<= 1; this->erase_shift = ffs(mtd->erasesize) - 1; this->page_shift = ffs(mtd->writesize) - 1; this->page_mask = (1 << (this->erase_shift - this->page_shift)) - 1; + /* Set density mask. it is used for DDP */ + if (ONENAND_IS_DDP(this)) + this->density_mask = this->chipsize >> (this->erase_shift + 1); /* It's real page size */ this->writesize = mtd->writesize; /* REVIST: Multichip handling */ - mtd->size = this->chipsize; + if (FLEXONENAND(this)) + flexonenand_get_size(mtd); + else + mtd->size = this->chipsize; /* Check OneNAND features */ onenand_check_features(mtd); @@ -2734,7 +3424,7 @@ static void onenand_resume(struct mtd_info *mtd) */ int onenand_scan(struct mtd_info *mtd, int maxchips) { - int i; + int i, ret; struct onenand_chip *this = mtd->priv; if (!this->read_word) @@ -2746,6 +3436,10 @@ int onenand_scan(struct mtd_info *mtd, int maxchips) this->command = onenand_command; if (!this->wait) onenand_setup_wait(mtd); + if (!this->bbt_wait) + this->bbt_wait = onenand_bbt_wait; + if (!this->unlock_all) + this->unlock_all = onenand_unlock_all; if (!this->read_bufferram) this->read_bufferram = onenand_read_bufferram; @@ -2796,6 +3490,10 @@ int onenand_scan(struct mtd_info *mtd, int maxchips) * Allow subpage writes up to oobsize. */ switch (mtd->oobsize) { + case 128: + this->ecclayout = &onenand_oob_128; + mtd->subpage_sft = 0; + break; case 64: this->ecclayout = &onenand_oob_64; mtd->subpage_sft = 2; @@ -2859,9 +3557,18 @@ int onenand_scan(struct mtd_info *mtd, int maxchips) mtd->owner = THIS_MODULE; /* Unlock whole block */ - onenand_unlock_all(mtd); + this->unlock_all(mtd); + + ret = this->scan_bbt(mtd); + if ((!FLEXONENAND(this)) || ret) + return ret; - return this->scan_bbt(mtd); + /* Change Flex-OneNAND boundaries if required */ + for (i = 0; i < MAX_DIES; i++) + flexonenand_set_boundary(mtd, i, flex_bdry[2 * i], + flex_bdry[(2 * i) + 1]); + + return 0; } /** @@ -2890,6 +3597,7 @@ void onenand_release(struct mtd_info *mtd) kfree(this->page_buf); if (this->options & ONENAND_OOBBUF_ALLOC) kfree(this->oob_buf); + kfree(mtd->eraseregions); } EXPORT_SYMBOL_GPL(onenand_scan); diff --git a/drivers/mtd/onenand/onenand_bbt.c b/drivers/mtd/onenand/onenand_bbt.c index 2f53b51c6805..a91fcac1af01 100644 --- a/drivers/mtd/onenand/onenand_bbt.c +++ b/drivers/mtd/onenand/onenand_bbt.c @@ -63,6 +63,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr loff_t from; size_t readlen, ooblen; struct mtd_oob_ops ops; + int rgn; printk(KERN_INFO "Scanning device for bad blocks\n"); @@ -76,7 +77,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr /* Note that numblocks is 2 * (real numblocks) here; * see i += 2 below as it makses shifting and masking less painful */ - numblocks = mtd->size >> (bbm->bbt_erase_shift - 1); + numblocks = this->chipsize >> (bbm->bbt_erase_shift - 1); startblock = 0; from = 0; @@ -106,7 +107,12 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr } } i += 2; - from += (1 << bbm->bbt_erase_shift); + + if (FLEXONENAND(this)) { + rgn = flexonenand_region(mtd, from); + from += mtd->eraseregions[rgn].erasesize; + } else + from += (1 << bbm->bbt_erase_shift); } return 0; @@ -143,7 +149,7 @@ static int onenand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt) uint8_t res; /* Get block number * 2 */ - block = (int) (offs >> (bbm->bbt_erase_shift - 1)); + block = (int) (onenand_block(this, offs) << 1); res = (bbm->bbt[block >> 3] >> (block & 0x06)) & 0x03; DEBUG(MTD_DEBUG_LEVEL2, "onenand_isbad_bbt: bbt info for offs 0x%08x: (block %d) 0x%02x\n", @@ -178,7 +184,7 @@ int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd) struct bbm_info *bbm = this->bbm; int len, ret = 0; - len = mtd->size >> (this->erase_shift + 2); + len = this->chipsize >> (this->erase_shift + 2); /* Allocate memory (2bit per block) and clear the memory bad block table */ bbm->bbt = kzalloc(len, GFP_KERNEL); if (!bbm->bbt) { diff --git a/drivers/mtd/onenand/onenand_sim.c b/drivers/mtd/onenand/onenand_sim.c index d64200b7c94b..f6e3c8aebd3a 100644 --- a/drivers/mtd/onenand/onenand_sim.c +++ b/drivers/mtd/onenand/onenand_sim.c @@ -6,6 +6,10 @@ * Copyright © 2005-2007 Samsung Electronics * Kyungmin Park <kyungmin.park@samsung.com> * + * Vishak G <vishak.g at samsung.com>, Rohit Hagargundgi <h.rohit at samsung.com> + * Flex-OneNAND simulator support + * Copyright (C) Samsung Electronics, 2008 + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -24,16 +28,38 @@ #ifndef CONFIG_ONENAND_SIM_MANUFACTURER #define CONFIG_ONENAND_SIM_MANUFACTURER 0xec #endif + #ifndef CONFIG_ONENAND_SIM_DEVICE_ID #define CONFIG_ONENAND_SIM_DEVICE_ID 0x04 #endif + +#define CONFIG_FLEXONENAND ((CONFIG_ONENAND_SIM_DEVICE_ID >> 9) & 1) + #ifndef CONFIG_ONENAND_SIM_VERSION_ID #define CONFIG_ONENAND_SIM_VERSION_ID 0x1e #endif +#ifndef CONFIG_ONENAND_SIM_TECHNOLOGY_ID +#define CONFIG_ONENAND_SIM_TECHNOLOGY_ID CONFIG_FLEXONENAND +#endif + +/* Initial boundary values for Flex-OneNAND Simulator */ +#ifndef CONFIG_FLEXONENAND_SIM_DIE0_BOUNDARY +#define CONFIG_FLEXONENAND_SIM_DIE0_BOUNDARY 0x01 +#endif + +#ifndef CONFIG_FLEXONENAND_SIM_DIE1_BOUNDARY +#define CONFIG_FLEXONENAND_SIM_DIE1_BOUNDARY 0x01 +#endif + static int manuf_id = CONFIG_ONENAND_SIM_MANUFACTURER; static int device_id = CONFIG_ONENAND_SIM_DEVICE_ID; static int version_id = CONFIG_ONENAND_SIM_VERSION_ID; +static int technology_id = CONFIG_ONENAND_SIM_TECHNOLOGY_ID; +static int boundary[] = { + CONFIG_FLEXONENAND_SIM_DIE0_BOUNDARY, + CONFIG_FLEXONENAND_SIM_DIE1_BOUNDARY, +}; struct onenand_flash { void __iomem *base; @@ -57,12 +83,18 @@ struct onenand_flash { (writew(v, this->base + ONENAND_REG_WP_STATUS)) /* It has all 0xff chars */ -#define MAX_ONENAND_PAGESIZE (2048 + 64) +#define MAX_ONENAND_PAGESIZE (4096 + 128) static unsigned char *ffchars; +#if CONFIG_FLEXONENAND +#define PARTITION_NAME "Flex-OneNAND simulator partition" +#else +#define PARTITION_NAME "OneNAND simulator partition" +#endif + static struct mtd_partition os_partitions[] = { { - .name = "OneNAND simulator partition", + .name = PARTITION_NAME, .offset = 0, .size = MTDPART_SIZ_FULL, }, @@ -104,6 +136,7 @@ static void onenand_lock_handle(struct onenand_chip *this, int cmd) switch (cmd) { case ONENAND_CMD_UNLOCK: + case ONENAND_CMD_UNLOCK_ALL: if (block_lock_scheme) ONENAND_SET_WP_STATUS(ONENAND_WP_US, this); else @@ -228,10 +261,12 @@ static void onenand_data_handle(struct onenand_chip *this, int cmd, { struct mtd_info *mtd = &info->mtd; struct onenand_flash *flash = this->priv; - int main_offset, spare_offset; + int main_offset, spare_offset, die = 0; void __iomem *src; void __iomem *dest; unsigned int i; + static int pi_operation; + int erasesize, rgn; if (dataram) { main_offset = mtd->writesize; @@ -241,10 +276,27 @@ static void onenand_data_handle(struct onenand_chip *this, int cmd, spare_offset = 0; } + if (pi_operation) { + die = readw(this->base + ONENAND_REG_START_ADDRESS2); + die >>= ONENAND_DDP_SHIFT; + } + switch (cmd) { + case FLEXONENAND_CMD_PI_ACCESS: + pi_operation = 1; + break; + + case ONENAND_CMD_RESET: + pi_operation = 0; + break; + case ONENAND_CMD_READ: src = ONENAND_CORE(flash) + offset; dest = ONENAND_MAIN_AREA(this, main_offset); + if (pi_operation) { + writew(boundary[die], this->base + ONENAND_DATARAM); + break; + } memcpy(dest, src, mtd->writesize); /* Fall through */ @@ -257,6 +309,10 @@ static void onenand_data_handle(struct onenand_chip *this, int cmd, case ONENAND_CMD_PROG: src = ONENAND_MAIN_AREA(this, main_offset); dest = ONENAND_CORE(flash) + offset; + if (pi_operation) { + boundary[die] = readw(this->base + ONENAND_DATARAM); + break; + } /* To handle partial write */ for (i = 0; i < (1 << mtd->subpage_sft); i++) { int off = i * this->subpagesize; @@ -284,9 +340,18 @@ static void onenand_data_handle(struct onenand_chip *this, int cmd, break; case ONENAND_CMD_ERASE: - memset(ONENAND_CORE(flash) + offset, 0xff, mtd->erasesize); + if (pi_operation) + break; + + if (FLEXONENAND(this)) { + rgn = flexonenand_region(mtd, offset); + erasesize = mtd->eraseregions[rgn].erasesize; + } else + erasesize = mtd->erasesize; + + memset(ONENAND_CORE(flash) + offset, 0xff, erasesize); memset(ONENAND_CORE_SPARE(flash, this, offset), 0xff, - (mtd->erasesize >> 5)); + (erasesize >> 5)); break; default: @@ -339,7 +404,7 @@ static void onenand_command_handle(struct onenand_chip *this, int cmd) } if (block != -1) - offset += block << this->erase_shift; + offset = onenand_addr(this, block); if (page != -1) offset += page << this->page_shift; @@ -390,6 +455,7 @@ static int __init flash_init(struct onenand_flash *flash) } density = device_id >> ONENAND_DEVICE_DENSITY_SHIFT; + density &= ONENAND_DEVICE_DENSITY_MASK; size = ((16 << 20) << density); ONENAND_CORE(flash) = vmalloc(size + (size >> 5)); @@ -405,8 +471,9 @@ static int __init flash_init(struct onenand_flash *flash) writew(manuf_id, flash->base + ONENAND_REG_MANUFACTURER_ID); writew(device_id, flash->base + ONENAND_REG_DEVICE_ID); writew(version_id, flash->base + ONENAND_REG_VERSION_ID); + writew(technology_id, flash->base + ONENAND_REG_TECHNOLOGY); - if (density < 2) + if (density < 2 && (!CONFIG_FLEXONENAND)) buffer_size = 0x0400; /* 1KiB page */ else buffer_size = 0x0800; /* 2KiB page */ diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index c5ded5ff72b5..c135202c38b3 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -94,7 +94,6 @@ #include <linux/atm_tcp.h> #include <linux/sonet.h> #include <linux/atm_suni.h> -#include <linux/mtd/mtd.h> #include <linux/usb.h> #include <linux/usbdevice_fs.h> @@ -1405,46 +1404,6 @@ static int ioc_settimeout(unsigned int fd, unsigned int cmd, unsigned long arg) #define HIDPGETCONNLIST _IOR('H', 210, int) #define HIDPGETCONNINFO _IOR('H', 211, int) -struct mtd_oob_buf32 { - u_int32_t start; - u_int32_t length; - compat_caddr_t ptr; /* unsigned char* */ -}; - -#define MEMWRITEOOB32 _IOWR('M',3,struct mtd_oob_buf32) -#define MEMREADOOB32 _IOWR('M',4,struct mtd_oob_buf32) - -static int mtd_rw_oob(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - struct mtd_oob_buf __user *buf = compat_alloc_user_space(sizeof(*buf)); - struct mtd_oob_buf32 __user *buf32 = compat_ptr(arg); - u32 data; - char __user *datap; - unsigned int real_cmd; - int err; - - real_cmd = (cmd == MEMREADOOB32) ? - MEMREADOOB : MEMWRITEOOB; - - if (copy_in_user(&buf->start, &buf32->start, - 2 * sizeof(u32)) || - get_user(data, &buf32->ptr)) - return -EFAULT; - datap = compat_ptr(data); - if (put_user(datap, &buf->ptr)) - return -EFAULT; - - err = sys_ioctl(fd, real_cmd, (unsigned long) buf); - - if (!err) { - if (copy_in_user(&buf32->start, &buf->start, - 2 * sizeof(u32))) - err = -EFAULT; - } - - return err; -} - #ifdef CONFIG_BLOCK struct raw32_config_request { @@ -2426,15 +2385,6 @@ COMPATIBLE_IOCTL(USBDEVFS_SUBMITURB32) COMPATIBLE_IOCTL(USBDEVFS_REAPURB32) COMPATIBLE_IOCTL(USBDEVFS_REAPURBNDELAY32) COMPATIBLE_IOCTL(USBDEVFS_CLEAR_HALT) -/* MTD */ -COMPATIBLE_IOCTL(MEMGETINFO) -COMPATIBLE_IOCTL(MEMERASE) -COMPATIBLE_IOCTL(MEMLOCK) -COMPATIBLE_IOCTL(MEMUNLOCK) -COMPATIBLE_IOCTL(MEMGETREGIONCOUNT) -COMPATIBLE_IOCTL(MEMGETREGIONINFO) -COMPATIBLE_IOCTL(MEMGETBADBLOCK) -COMPATIBLE_IOCTL(MEMSETBADBLOCK) /* NBD */ ULONG_IOCTL(NBD_SET_SOCK) ULONG_IOCTL(NBD_SET_BLKSIZE) @@ -2544,8 +2494,6 @@ COMPATIBLE_IOCTL(JSIOCGBUTTONS) COMPATIBLE_IOCTL(JSIOCGNAME(0)) /* now things that need handlers */ -HANDLE_IOCTL(MEMREADOOB32, mtd_rw_oob) -HANDLE_IOCTL(MEMWRITEOOB32, mtd_rw_oob) #ifdef CONFIG_NET HANDLE_IOCTL(SIOCGIFNAME, dev_ifname32) HANDLE_IOCTL(SIOCGIFCONF, dev_ifconf) diff --git a/fs/jffs2/scan.c b/fs/jffs2/scan.c index 1d437de1e9a8..7515e73e2bfb 100644 --- a/fs/jffs2/scan.c +++ b/fs/jffs2/scan.c @@ -196,7 +196,7 @@ int jffs2_scan_medium(struct jffs2_sb_info *c) if (c->nextblock) { ret = file_dirty(c, c->nextblock); if (ret) - return ret; + goto out; /* deleting summary information of the old nextblock */ jffs2_sum_reset_collected(c->summary); } @@ -207,7 +207,7 @@ int jffs2_scan_medium(struct jffs2_sb_info *c) } else { ret = file_dirty(c, jeb); if (ret) - return ret; + goto out; } break; diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 7efb9be34662..4030ebada49e 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -563,6 +563,7 @@ extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len, * @options: Option flags, e.g. 16bit buswidth * @ecclayout: ecc layout info structure * @part_probe_types: NULL-terminated array of probe types + * @set_parts: platform specific function to set partitions * @priv: hardware controller specific settings */ struct platform_nand_chip { @@ -574,26 +575,41 @@ struct platform_nand_chip { int chip_delay; unsigned int options; const char **part_probe_types; + void (*set_parts)(uint64_t size, + struct platform_nand_chip *chip); void *priv; }; +/* Keep gcc happy */ +struct platform_device; + /** * struct platform_nand_ctrl - controller level device structure + * @probe: platform specific function to probe/setup hardware + * @remove: platform specific function to remove/teardown hardware * @hwcontrol: platform specific hardware control structure * @dev_ready: platform specific function to read ready/busy pin * @select_chip: platform specific chip select function * @cmd_ctrl: platform specific function for controlling * ALE/CLE/nCE. Also used to write command and address + * @write_buf: platform specific function for write buffer + * @read_buf: platform specific function for read buffer * @priv: private data to transport driver specific settings * * All fields are optional and depend on the hardware driver requirements */ struct platform_nand_ctrl { + int (*probe)(struct platform_device *pdev); + void (*remove)(struct platform_device *pdev); void (*hwcontrol)(struct mtd_info *mtd, int cmd); int (*dev_ready)(struct mtd_info *mtd); void (*select_chip)(struct mtd_info *mtd, int chip); void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl); + void (*write_buf)(struct mtd_info *mtd, + const uint8_t *buf, int len); + void (*read_buf)(struct mtd_info *mtd, + uint8_t *buf, int len); void *priv; }; diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h index 9aa2a9149b58..8ed873374381 100644 --- a/include/linux/mtd/onenand.h +++ b/include/linux/mtd/onenand.h @@ -17,6 +17,7 @@ #include <linux/mtd/onenand_regs.h> #include <linux/mtd/bbm.h> +#define MAX_DIES 2 #define MAX_BUFFERRAM 2 /* Scan and identify a OneNAND device */ @@ -51,7 +52,12 @@ struct onenand_bufferram { /** * struct onenand_chip - OneNAND Private Flash Chip Data * @base: [BOARDSPECIFIC] address to access OneNAND + * @dies: [INTERN][FLEX-ONENAND] number of dies on chip + * @boundary: [INTERN][FLEX-ONENAND] Boundary of the dies + * @diesize: [INTERN][FLEX-ONENAND] Size of the dies * @chipsize: [INTERN] the size of one chip for multichip arrays + * FIXME For Flex-OneNAND, chipsize holds maximum possible + * device size ie when all blocks are considered MLC * @device_id: [INTERN] device ID * @density_mask: chip density, used for DDP devices * @verstion_id: [INTERN] version ID @@ -68,6 +74,8 @@ struct onenand_bufferram { * @command: [REPLACEABLE] hardware specific function for writing * commands to the chip * @wait: [REPLACEABLE] hardware specific function for wait on ready + * @bbt_wait: [REPLACEABLE] hardware specific function for bbt wait on ready + * @unlock_all: [REPLACEABLE] hardware specific function for unlock all * @read_bufferram: [REPLACEABLE] hardware specific function for BufferRAM Area * @write_bufferram: [REPLACEABLE] hardware specific function for BufferRAM Area * @read_word: [REPLACEABLE] hardware specific function for read @@ -92,9 +100,13 @@ struct onenand_bufferram { */ struct onenand_chip { void __iomem *base; + unsigned dies; + unsigned boundary[MAX_DIES]; + loff_t diesize[MAX_DIES]; unsigned int chipsize; unsigned int device_id; unsigned int version_id; + unsigned int technology; unsigned int density_mask; unsigned int options; @@ -108,6 +120,8 @@ struct onenand_chip { int (*command)(struct mtd_info *mtd, int cmd, loff_t address, size_t len); int (*wait)(struct mtd_info *mtd, int state); + int (*bbt_wait)(struct mtd_info *mtd, int state); + void (*unlock_all)(struct mtd_info *mtd); int (*read_bufferram)(struct mtd_info *mtd, int area, unsigned char *buffer, int offset, size_t count); int (*write_bufferram)(struct mtd_info *mtd, int area, @@ -145,6 +159,8 @@ struct onenand_chip { #define ONENAND_SET_BUFFERRAM0(this) (this->bufferram_index = 0) #define ONENAND_SET_BUFFERRAM1(this) (this->bufferram_index = 1) +#define FLEXONENAND(this) \ + (this->device_id & DEVICE_IS_FLEXONENAND) #define ONENAND_GET_SYS_CFG1(this) \ (this->read_word(this->base + ONENAND_REG_SYS_CFG1)) #define ONENAND_SET_SYS_CFG1(v, this) \ @@ -153,6 +169,9 @@ struct onenand_chip { #define ONENAND_IS_DDP(this) \ (this->device_id & ONENAND_DEVICE_IS_DDP) +#define ONENAND_IS_MLC(this) \ + (this->technology & ONENAND_TECHNOLOGY_IS_MLC) + #ifdef CONFIG_MTD_ONENAND_2X_PROGRAM #define ONENAND_IS_2PLANE(this) \ (this->options & ONENAND_HAS_2PLANE) @@ -169,6 +188,7 @@ struct onenand_chip { #define ONENAND_HAS_CONT_LOCK (0x0001) #define ONENAND_HAS_UNLOCK_ALL (0x0002) #define ONENAND_HAS_2PLANE (0x0004) +#define ONENAND_SKIP_UNLOCK_CHECK (0x0100) #define ONENAND_PAGEBUF_ALLOC (0x1000) #define ONENAND_OOBBUF_ALLOC (0x2000) @@ -176,6 +196,7 @@ struct onenand_chip { * OneNAND Flash Manufacturer ID Codes */ #define ONENAND_MFR_SAMSUNG 0xec +#define ONENAND_MFR_NUMONYX 0x20 /** * struct onenand_manufacturers - NAND Flash Manufacturer ID Structure @@ -189,5 +210,8 @@ struct onenand_manufacturers { int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops); +unsigned onenand_block(struct onenand_chip *this, loff_t addr); +loff_t onenand_addr(struct onenand_chip *this, int block); +int flexonenand_region(struct mtd_info *mtd, loff_t addr); #endif /* __LINUX_MTD_ONENAND_H */ diff --git a/include/linux/mtd/onenand_regs.h b/include/linux/mtd/onenand_regs.h index 0c6bbe28f38c..86a6bbef6465 100644 --- a/include/linux/mtd/onenand_regs.h +++ b/include/linux/mtd/onenand_regs.h @@ -67,6 +67,9 @@ /* * Device ID Register F001h (R) */ +#define DEVICE_IS_FLEXONENAND (1 << 9) +#define FLEXONENAND_PI_MASK (0x3ff) +#define FLEXONENAND_PI_UNLOCK_SHIFT (14) #define ONENAND_DEVICE_DENSITY_MASK (0xf) #define ONENAND_DEVICE_DENSITY_SHIFT (4) #define ONENAND_DEVICE_IS_DDP (1 << 3) @@ -84,6 +87,11 @@ #define ONENAND_VERSION_PROCESS_SHIFT (8) /* + * Technology Register F006h (R) + */ +#define ONENAND_TECHNOLOGY_IS_MLC (1 << 0) + +/* * Start Address 1 F100h (R/W) & Start Address 2 F101h (R/W) */ #define ONENAND_DDP_SHIFT (15) @@ -93,7 +101,8 @@ /* * Start Address 8 F107h (R/W) */ -#define ONENAND_FPA_MASK (0x3f) +/* Note: It's actually 0x3f in case of SLC */ +#define ONENAND_FPA_MASK (0x7f) #define ONENAND_FPA_SHIFT (2) #define ONENAND_FSA_MASK (0x03) @@ -105,7 +114,8 @@ #define ONENAND_BSA_BOOTRAM (0 << 2) #define ONENAND_BSA_DATARAM0 (2 << 2) #define ONENAND_BSA_DATARAM1 (3 << 2) -#define ONENAND_BSC_MASK (0x03) +/* Note: It's actually 0x03 in case of SLC */ +#define ONENAND_BSC_MASK (0x07) /* * Command Register F220h (R/W) @@ -124,9 +134,13 @@ #define ONENAND_CMD_RESET (0xF0) #define ONENAND_CMD_OTP_ACCESS (0x65) #define ONENAND_CMD_READID (0x90) +#define FLEXONENAND_CMD_PI_UPDATE (0x05) +#define FLEXONENAND_CMD_PI_ACCESS (0x66) +#define FLEXONENAND_CMD_RECOVER_LSB (0x05) /* NOTE: Those are not *REAL* commands */ #define ONENAND_CMD_BUFFERRAM (0x1978) +#define FLEXONENAND_CMD_READ_PI (0x1985) /* * System Configuration 1 Register F221h (R, R/W) @@ -192,10 +206,12 @@ #define ONENAND_ECC_1BIT_ALL (0x5555) #define ONENAND_ECC_2BIT (1 << 1) #define ONENAND_ECC_2BIT_ALL (0xAAAA) +#define FLEXONENAND_UNCORRECTABLE_ERROR (0x1010) /* * One-Time Programmable (OTP) */ +#define FLEXONENAND_OTP_LOCK_OFFSET (2048) #define ONENAND_OTP_LOCK_OFFSET (14) #endif /* __ONENAND_REG_H */ diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h index 7535a74083b9..af6dcb992bc3 100644 --- a/include/linux/mtd/partitions.h +++ b/include/linux/mtd/partitions.h @@ -40,7 +40,6 @@ struct mtd_partition { uint64_t offset; /* offset within the master MTD space */ uint32_t mask_flags; /* master MTD flags to mask out for this partition */ struct nand_ecclayout *ecclayout; /* out of band layout for this partition (NAND only)*/ - struct mtd_info **mtdp; /* pointer to store the MTD object */ }; #define MTDPART_OFS_NXTBLK (-2) diff --git a/include/mtd/Kbuild b/include/mtd/Kbuild index 8eb018f96002..192f8fb7d546 100644 --- a/include/mtd/Kbuild +++ b/include/mtd/Kbuild @@ -1,5 +1,4 @@ header-y += inftl-user.h -header-y += jffs2-user.h header-y += mtd-abi.h header-y += mtd-user.h header-y += nftl-user.h diff --git a/include/mtd/jffs2-user.h b/include/mtd/jffs2-user.h deleted file mode 100644 index fa94b0eb67c1..000000000000 --- a/include/mtd/jffs2-user.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * JFFS2 definitions for use in user space only - */ - -#ifndef __JFFS2_USER_H__ -#define __JFFS2_USER_H__ - -/* This file is blessed for inclusion by userspace */ -#include <linux/jffs2.h> -#include <linux/types.h> -#include <endian.h> -#include <byteswap.h> - -#undef cpu_to_je16 -#undef cpu_to_je32 -#undef cpu_to_jemode -#undef je16_to_cpu -#undef je32_to_cpu -#undef jemode_to_cpu - -extern int target_endian; - -#define t16(x) ({ __u16 __b = (x); (target_endian==__BYTE_ORDER)?__b:bswap_16(__b); }) -#define t32(x) ({ __u32 __b = (x); (target_endian==__BYTE_ORDER)?__b:bswap_32(__b); }) - -#define cpu_to_je16(x) ((jint16_t){t16(x)}) -#define cpu_to_je32(x) ((jint32_t){t32(x)}) -#define cpu_to_jemode(x) ((jmode_t){t32(x)}) - -#define je16_to_cpu(x) (t16((x).v16)) -#define je32_to_cpu(x) (t32((x).v32)) -#define jemode_to_cpu(x) (t32((x).m)) - -#endif /* __JFFS2_USER_H__ */ diff --git a/include/mtd/mtd-abi.h b/include/mtd/mtd-abi.h index b6595b3c68b6..be51ae2bd0ff 100644 --- a/include/mtd/mtd-abi.h +++ b/include/mtd/mtd-abi.h @@ -12,12 +12,24 @@ struct erase_info_user { __u32 length; }; +struct erase_info_user64 { + __u64 start; + __u64 length; +}; + struct mtd_oob_buf { __u32 start; __u32 length; unsigned char __user *ptr; }; +struct mtd_oob_buf64 { + __u64 start; + __u32 pad; + __u32 length; + __u64 usr_ptr; +}; + #define MTD_ABSENT 0 #define MTD_RAM 1 #define MTD_ROM 2 @@ -95,6 +107,9 @@ struct otp_info { #define ECCGETLAYOUT _IOR('M', 17, struct nand_ecclayout) #define ECCGETSTATS _IOR('M', 18, struct mtd_ecc_stats) #define MTDFILEMODE _IO('M', 19) +#define MEMERASE64 _IOW('M', 20, struct erase_info_user64) +#define MEMWRITEOOB64 _IOWR('M', 21, struct mtd_oob_buf64) +#define MEMREADOOB64 _IOWR('M', 22, struct mtd_oob_buf64) /* * Obsolete legacy interface. Keep it in order not to break userspace |