diff options
| -rw-r--r-- | drivers/net/wireless/ath/ath9k/recv.c | 220 |
1 files changed, 110 insertions, 110 deletions
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 9fabd5f111ec..51e7d16841d6 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -929,6 +929,116 @@ static void ath9k_process_tsf(struct ath_rx_status *rs, rxs->mactime += 0x100000000ULL; } +#ifdef CONFIG_ATH9K_DEBUGFS +static s8 fix_rssi_inv_only(u8 rssi_val) +{ + if (rssi_val == 128) + rssi_val = 0; + return (s8) rssi_val; +} +#endif + +/* returns 1 if this was a spectral frame, even if not handled. */ +static int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr, + struct ath_rx_status *rs, u64 tsf) +{ +#ifdef CONFIG_ATH9K_DEBUGFS + struct ath_hw *ah = sc->sc_ah; + u8 bins[SPECTRAL_HT20_NUM_BINS]; + u8 *vdata = (u8 *)hdr; + struct fft_sample_ht20 fft_sample; + struct ath_radar_info *radar_info; + struct ath_ht20_mag_info *mag_info; + int len = rs->rs_datalen; + int dc_pos; + u16 length, max_magnitude; + + /* AR9280 and before report via ATH9K_PHYERR_RADAR, AR93xx and newer + * via ATH9K_PHYERR_SPECTRAL. Haven't seen ATH9K_PHYERR_FALSE_RADAR_EXT + * yet, but this is supposed to be possible as well. + */ + if (rs->rs_phyerr != ATH9K_PHYERR_RADAR && + rs->rs_phyerr != ATH9K_PHYERR_FALSE_RADAR_EXT && + rs->rs_phyerr != ATH9K_PHYERR_SPECTRAL) + return 0; + + /* check if spectral scan bit is set. This does not have to be checked + * if received through a SPECTRAL phy error, but shouldn't hurt. + */ + radar_info = ((struct ath_radar_info *)&vdata[len]) - 1; + if (!(radar_info->pulse_bw_info & SPECTRAL_SCAN_BITMASK)) + return 0; + + /* Variation in the data length is possible and will be fixed later. + * Note that we only support HT20 for now. + * + * TODO: add HT20_40 support as well. + */ + if ((len > SPECTRAL_HT20_TOTAL_DATA_LEN + 2) || + (len < SPECTRAL_HT20_TOTAL_DATA_LEN - 1)) + return 1; + + fft_sample.tlv.type = ATH_FFT_SAMPLE_HT20; + length = sizeof(fft_sample) - sizeof(fft_sample.tlv); + fft_sample.tlv.length = __cpu_to_be16(length); + + fft_sample.freq = __cpu_to_be16(ah->curchan->chan->center_freq); + fft_sample.rssi = fix_rssi_inv_only(rs->rs_rssi_ctl0); + fft_sample.noise = ah->noise; + + switch (len - SPECTRAL_HT20_TOTAL_DATA_LEN) { + case 0: + /* length correct, nothing to do. */ + memcpy(bins, vdata, SPECTRAL_HT20_NUM_BINS); + break; + case -1: + /* first byte missing, duplicate it. */ + memcpy(&bins[1], vdata, SPECTRAL_HT20_NUM_BINS - 1); + bins[0] = vdata[0]; + break; + case 2: + /* MAC added 2 extra bytes at bin 30 and 32, remove them. */ + memcpy(bins, vdata, 30); + bins[30] = vdata[31]; + memcpy(&bins[31], &vdata[33], SPECTRAL_HT20_NUM_BINS - 31); + break; + case 1: + /* MAC added 2 extra bytes AND first byte is missing. */ + bins[0] = vdata[0]; + memcpy(&bins[0], vdata, 30); + bins[31] = vdata[31]; + memcpy(&bins[32], &vdata[33], SPECTRAL_HT20_NUM_BINS - 32); + break; + default: + return 1; + } + + /* DC value (value in the middle) is the blind spot of the spectral + * sample and invalid, interpolate it. + */ + dc_pos = SPECTRAL_HT20_NUM_BINS / 2; + bins[dc_pos] = (bins[dc_pos + 1] + bins[dc_pos - 1]) / 2; + + /* mag data is at the end of the frame, in front of radar_info */ + mag_info = ((struct ath_ht20_mag_info *)radar_info) - 1; + + /* copy raw bins without scaling them */ + memcpy(fft_sample.data, bins, SPECTRAL_HT20_NUM_BINS); + fft_sample.max_exp = mag_info->max_exp & 0xf; + + max_magnitude = spectral_max_magnitude(mag_info->all_bins); + fft_sample.max_magnitude = __cpu_to_be16(max_magnitude); + fft_sample.max_index = spectral_max_index(mag_info->all_bins); + fft_sample.bitmap_weight = spectral_bitmap_weight(mag_info->all_bins); + fft_sample.tsf = __cpu_to_be64(tsf); + + ath_debug_send_fft_sample(sc, &fft_sample.tlv); + return 1; +#else + return 0; +#endif +} + /* * For Decrypt or Demic errors, we only mark packet status here and always push * up the frame up to let mac80211 handle the actual error case, be it no @@ -1052,116 +1162,6 @@ static void ath9k_rx_skb_postprocess(struct ath_common *common, rxs->flag &= ~RX_FLAG_DECRYPTED; } -#ifdef CONFIG_ATH9K_DEBUGFS -static s8 fix_rssi_inv_only(u8 rssi_val) -{ - if (rssi_val == 128) - rssi_val = 0; - return (s8) rssi_val; -} -#endif - -/* returns 1 if this was a spectral frame, even if not handled. */ -static int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr, - struct ath_rx_status *rs, u64 tsf) -{ -#ifdef CONFIG_ATH9K_DEBUGFS - struct ath_hw *ah = sc->sc_ah; - u8 bins[SPECTRAL_HT20_NUM_BINS]; - u8 *vdata = (u8 *)hdr; - struct fft_sample_ht20 fft_sample; - struct ath_radar_info *radar_info; - struct ath_ht20_mag_info *mag_info; - int len = rs->rs_datalen; - int dc_pos; - u16 length, max_magnitude; - - /* AR9280 and before report via ATH9K_PHYERR_RADAR, AR93xx and newer - * via ATH9K_PHYERR_SPECTRAL. Haven't seen ATH9K_PHYERR_FALSE_RADAR_EXT - * yet, but this is supposed to be possible as well. - */ - if (rs->rs_phyerr != ATH9K_PHYERR_RADAR && - rs->rs_phyerr != ATH9K_PHYERR_FALSE_RADAR_EXT && - rs->rs_phyerr != ATH9K_PHYERR_SPECTRAL) - return 0; - - /* check if spectral scan bit is set. This does not have to be checked - * if received through a SPECTRAL phy error, but shouldn't hurt. - */ - radar_info = ((struct ath_radar_info *)&vdata[len]) - 1; - if (!(radar_info->pulse_bw_info & SPECTRAL_SCAN_BITMASK)) - return 0; - - /* Variation in the data length is possible and will be fixed later. - * Note that we only support HT20 for now. - * - * TODO: add HT20_40 support as well. - */ - if ((len > SPECTRAL_HT20_TOTAL_DATA_LEN + 2) || - (len < SPECTRAL_HT20_TOTAL_DATA_LEN - 1)) - return 1; - - fft_sample.tlv.type = ATH_FFT_SAMPLE_HT20; - length = sizeof(fft_sample) - sizeof(fft_sample.tlv); - fft_sample.tlv.length = __cpu_to_be16(length); - - fft_sample.freq = __cpu_to_be16(ah->curchan->chan->center_freq); - fft_sample.rssi = fix_rssi_inv_only(rs->rs_rssi_ctl0); - fft_sample.noise = ah->noise; - - switch (len - SPECTRAL_HT20_TOTAL_DATA_LEN) { - case 0: - /* length correct, nothing to do. */ - memcpy(bins, vdata, SPECTRAL_HT20_NUM_BINS); - break; - case -1: - /* first byte missing, duplicate it. */ - memcpy(&bins[1], vdata, SPECTRAL_HT20_NUM_BINS - 1); - bins[0] = vdata[0]; - break; - case 2: - /* MAC added 2 extra bytes at bin 30 and 32, remove them. */ - memcpy(bins, vdata, 30); - bins[30] = vdata[31]; - memcpy(&bins[31], &vdata[33], SPECTRAL_HT20_NUM_BINS - 31); - break; - case 1: - /* MAC added 2 extra bytes AND first byte is missing. */ - bins[0] = vdata[0]; - memcpy(&bins[0], vdata, 30); - bins[31] = vdata[31]; - memcpy(&bins[32], &vdata[33], SPECTRAL_HT20_NUM_BINS - 32); - break; - default: - return 1; - } - - /* DC value (value in the middle) is the blind spot of the spectral - * sample and invalid, interpolate it. - */ - dc_pos = SPECTRAL_HT20_NUM_BINS / 2; - bins[dc_pos] = (bins[dc_pos + 1] + bins[dc_pos - 1]) / 2; - - /* mag data is at the end of the frame, in front of radar_info */ - mag_info = ((struct ath_ht20_mag_info *)radar_info) - 1; - - /* copy raw bins without scaling them */ - memcpy(fft_sample.data, bins, SPECTRAL_HT20_NUM_BINS); - fft_sample.max_exp = mag_info->max_exp & 0xf; - - max_magnitude = spectral_max_magnitude(mag_info->all_bins); - fft_sample.max_magnitude = __cpu_to_be16(max_magnitude); - fft_sample.max_index = spectral_max_index(mag_info->all_bins); - fft_sample.bitmap_weight = spectral_bitmap_weight(mag_info->all_bins); - fft_sample.tsf = __cpu_to_be64(tsf); - - ath_debug_send_fft_sample(sc, &fft_sample.tlv); - return 1; -#else - return 0; -#endif -} - static void ath9k_apply_ampdu_details(struct ath_softc *sc, struct ath_rx_status *rs, struct ieee80211_rx_status *rxs) { |