diff options
52 files changed, 3789 insertions, 290 deletions
diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt index 2d6356d8daf4..bf5fc59a6938 100644 --- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt @@ -10,6 +10,7 @@ Properties: - "samsung,exynos5260-pmu" - for Exynos5260 SoC. - "samsung,exynos5410-pmu" - for Exynos5410 SoC, - "samsung,exynos5420-pmu" - for Exynos5420 SoC. + - "samsung,exynos5433-pmu" - for Exynos5433 SoC. - "samsung,exynos7-pmu" - for Exynos7 SoC. second value must be always "syscon". diff --git a/Documentation/devicetree/bindings/bus/qcom,ebi2.txt b/Documentation/devicetree/bindings/bus/qcom,ebi2.txt new file mode 100644 index 000000000000..920681f552db --- /dev/null +++ b/Documentation/devicetree/bindings/bus/qcom,ebi2.txt @@ -0,0 +1,138 @@ +Qualcomm External Bus Interface 2 (EBI2) + +The EBI2 contains two peripheral blocks: XMEM and LCDC. The XMEM handles any +external memory (such as NAND or other memory-mapped peripherals) whereas +LCDC handles LCD displays. + +As it says it connects devices to an external bus interface, meaning address +lines (up to 9 address lines so can only address 1KiB external memory space), +data lines (16 bits), OE (output enable), ADV (address valid, used on some +NOR flash memories), WE (write enable). This on top of 6 different chip selects +(CS0 thru CS5) so that in theory 6 different devices can be connected. + +Apparently this bus is clocked at 64MHz. It has dedicated pins on the package +and the bus can only come out on these pins, however if some of the pins are +unused they can be left unconnected or remuxed to be used as GPIO or in some +cases other orthogonal functions as well. + +Also CS1 and CS2 has -A and -B signals. Why they have that is unclear to me. + +The chip selects have the following memory range assignments. This region of +memory is referred to as "Chip Peripheral SS FPB0" and is 168MB big. + +Chip Select Physical address base +CS0 GPIO134 0x1a800000-0x1b000000 (8MB) +CS1 GPIO39 (A) / GPIO123 (B) 0x1b000000-0x1b800000 (8MB) +CS2 GPIO40 (A) / GPIO124 (B) 0x1b800000-0x1c000000 (8MB) +CS3 GPIO133 0x1d000000-0x25000000 (128 MB) +CS4 GPIO132 0x1c800000-0x1d000000 (8MB) +CS5 GPIO131 0x1c000000-0x1c800000 (8MB) + +The APQ8060 Qualcomm Application Processor User Guide, 80-N7150-14 Rev. A, +August 6, 2012 contains some incomplete documentation of the EBI2. + +FIXME: the manual mentions "write precharge cycles" and "precharge cycles". +We have not been able to figure out which bit fields these correspond to +in the hardware, or what valid values exist. The current hypothesis is that +this is something just used on the FAST chip selects and that the SLOW +chip selects are understood fully. There is also a "byte device enable" +flag somewhere for 8bit memories. + +FIXME: The chipselects have SLOW and FAST configuration registers. It's a bit +unclear what this means, if they are mutually exclusive or can be used +together, or if some chip selects are hardwired to be FAST and others are SLOW +by design. + +The XMEM registers are totally undocumented but could be partially decoded +because the Cypress AN49576 Antioch Westbridge apparently has suspiciously +similar register layout, see: http://www.cypress.com/file/105771/download + +Required properties: +- compatible: should be one of: + "qcom,msm8660-ebi2" + "qcom,apq8060-ebi2" +- #address-cells: shoule be <2>: the first cell is the chipselect, + the second cell is the offset inside the memory range +- #size-cells: should be <1> +- ranges: should be set to: + ranges = <0 0x0 0x1a800000 0x00800000>, + <1 0x0 0x1b000000 0x00800000>, + <2 0x0 0x1b800000 0x00800000>, + <3 0x0 0x1d000000 0x08000000>, + <4 0x0 0x1c800000 0x00800000>, + <5 0x0 0x1c000000 0x00800000>; +- reg: two ranges of registers: EBI2 config and XMEM config areas +- reg-names: should be "ebi2", "xmem" +- clocks: two clocks, EBI_2X and EBI +- clock-names: shoule be "ebi2x", "ebi2" + +Optional subnodes: +- Nodes inside the EBI2 will be considered device nodes. + +The following optional properties are properties that can be tagged onto +any device subnode. We are assuming that there can be only ONE device per +chipselect subnode, else the properties will become ambigous. + +Optional properties arrays for SLOW chip selects: +- qcom,xmem-recovery-cycles: recovery cycles is the time the memory continues to + drive the data bus after OE is de-asserted, in order to avoid contention on + the data bus. They are inserted when reading one CS and switching to another + CS or read followed by write on the same CS. Valid values 0 thru 15. Minimum + value is actually 1, so a value of 0 will still yield 1 recovery cycle. +- qcom,xmem-write-hold-cycles: write hold cycles, these are extra cycles + inserted after every write minimum 1. The data out is driven from the time + WE is asserted until CS is asserted. With a hold of 1 (value = 0), the CS + stays active for 1 extra cycle etc. Valid values 0 thru 15. +- qcom,xmem-write-delta-cycles: initial latency for write cycles inserted for + the first write to a page or burst memory. Valid values 0 thru 255. +- qcom,xmem-read-delta-cycles: initial latency for read cycles inserted for the + first read to a page or burst memory. Valid values 0 thru 255. +- qcom,xmem-write-wait-cycles: number of wait cycles for every write access, 0=1 + cycle. Valid values 0 thru 15. +- qcom,xmem-read-wait-cycles: number of wait cycles for every read access, 0=1 + cycle. Valid values 0 thru 15. + +Optional properties arrays for FAST chip selects: +- qcom,xmem-address-hold-enable: this is a boolean property stating that we + shall hold the address for an extra cycle to meet hold time requirements + with ADV assertion. +- qcom,xmem-adv-to-oe-recovery-cycles: the number of cycles elapsed before an OE + assertion, with respect to the cycle where ADV (address valid) is asserted. + 2 means 2 cycles between ADV and OE. Valid values 0, 1, 2 or 3. +- qcom,xmem-read-hold-cycles: the length in cycles of the first segment of a + read transfer. For a single read trandfer this will be the time from CS + assertion to OE assertion. Valid values 0 thru 15. + + +Example: + +ebi2@1a100000 { + compatible = "qcom,apq8060-ebi2"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0x0 0x1a800000 0x00800000>, + <1 0x0 0x1b000000 0x00800000>, + <2 0x0 0x1b800000 0x00800000>, + <3 0x0 0x1d000000 0x08000000>, + <4 0x0 0x1c800000 0x00800000>, + <5 0x0 0x1c000000 0x00800000>; + reg = <0x1a100000 0x1000>, <0x1a110000 0x1000>; + reg-names = "ebi2", "xmem"; + clocks = <&gcc EBI2_2X_CLK>, <&gcc EBI2_CLK>; + clock-names = "ebi2x", "ebi2"; + /* Make sure to set up the pin control for the EBI2 */ + pinctrl-names = "default"; + pinctrl-0 = <&foo_ebi2_pins>; + + foo-ebi2@2,0 { + compatible = "foo"; + reg = <2 0x0 0x100>; + (...) + qcom,xmem-recovery-cycles = <0>; + qcom,xmem-write-hold-cycles = <3>; + qcom,xmem-write-delta-cycles = <31>; + qcom,xmem-read-delta-cycles = <28>; + qcom,xmem-write-wait-cycles = <9>; + qcom,xmem-read-wait-cycles = <9>; + }; +}; diff --git a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt index 670c2af3e931..eb985a633d59 100644 --- a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt +++ b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt @@ -52,6 +52,7 @@ Required properties: "marvell,dove-core-clock" - for Dove SoC core clocks "marvell,kirkwood-core-clock" - for Kirkwood SoC (except mv88f6180) "marvell,mv88f6180-core-clock" - for Kirkwood MV88f6180 SoC + "marvell,mv88f5181-core-clock" - for Orion MV88F5181 SoC "marvell,mv88f5182-core-clock" - for Orion MV88F5182 SoC "marvell,mv88f5281-core-clock" - for Orion MV88F5281 SoC "marvell,mv88f6183-core-clock" - for Orion MV88F6183 SoC diff --git a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt index fee3205cdff9..c209de6cfadb 100644 --- a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt +++ b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt @@ -1,16 +1,16 @@ STMicroelectronics STM32 Reset and Clock Controller =================================================== -The RCC IP is both a reset and a clock controller. This documentation only -describes the clock part. +The RCC IP is both a reset and a clock controller. -Please also refer to clock-bindings.txt in this directory for common clock -controller binding usage. +Please refer to clock-bindings.txt for common clock controller binding usage. +Please also refer to reset.txt for common reset controller binding usage. Required properties: - compatible: Should be "st,stm32f42xx-rcc" - reg: should be register base and length as documented in the datasheet +- #reset-cells: 1, see below - #clock-cells: 2, device nodes should specify the clock in their "clocks" property, containing a phandle to the clock device node, an index selecting between gated clocks and other clocks and an index specifying the clock to @@ -19,6 +19,7 @@ Required properties: Example: rcc: rcc@40023800 { + #reset-cells = <1>; #clock-cells = <2> compatible = "st,stm32f42xx-rcc", "st,stm32-rcc"; reg = <0x40023800 0x400>; @@ -35,16 +36,23 @@ from the first RCC clock enable register (RCC_AHB1ENR, address offset 0x30). It is calculated as: index = register_offset / 4 * 32 + bit_offset. Where bit_offset is the bit offset within the register (LSB is 0, MSB is 31). +To simplify the usage and to share bit definition with the reset and clock +drivers of the RCC IP, macros are available to generate the index in +human-readble format. + +For STM32F4 series, the macro are available here: + - include/dt-bindings/mfd/stm32f4-rcc.h + Example: /* Gated clock, AHB1 bit 0 (GPIOA) */ ... { - clocks = <&rcc 0 0> + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)> }; /* Gated clock, AHB2 bit 4 (CRYP) */ ... { - clocks = <&rcc 0 36> + clocks = <&rcc 0 STM32F4_AHB2_CLOCK(CRYP)> }; Specifying other clocks @@ -61,5 +69,25 @@ Example: /* Misc clock, FCLK */ ... { - clocks = <&rcc 1 1> + clocks = <&rcc 1 STM32F4_APB1_CLOCK(TIM2)> + }; + + +Specifying softreset control of devices +======================================= + +Device nodes should specify the reset channel required in their "resets" +property, containing a phandle to the reset device node and an index specifying +which channel to use. +The index is the bit number within the RCC registers bank, starting from RCC +base address. +It is calculated as: index = register_offset / 4 * 32 + bit_offset. +Where bit_offset is the bit offset within the register. +For example, for CRC reset: + crc = AHB1RSTR_offset / 4 * 32 + CRCRST_bit_offset = 0x10 / 4 * 32 + 12 = 140 + +example: + + timer2 { + resets = <&rcc STM32F4_APB1_RESET(TIM2)>; }; diff --git a/Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt b/Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt new file mode 100644 index 000000000000..afb11cf693c0 --- /dev/null +++ b/Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt @@ -0,0 +1,112 @@ +* APM X-Gene SoC PMU bindings + +This is APM X-Gene SoC PMU (Performance Monitoring Unit) module. +The following PMU devices are supported: + + L3C - L3 cache controller + IOB - IO bridge + MCB - Memory controller bridge + MC - Memory controller + +The following section describes the SoC PMU DT node binding. + +Required properties: +- compatible : Shall be "apm,xgene-pmu" for revision 1 or + "apm,xgene-pmu-v2" for revision 2. +- regmap-csw : Regmap of the CPU switch fabric (CSW) resource. +- regmap-mcba : Regmap of the MCB-A (memory bridge) resource. +- regmap-mcbb : Regmap of the MCB-B (memory bridge) resource. +- reg : First resource shall be the CPU bus PMU resource. +- interrupts : Interrupt-specifier for PMU IRQ. + +Required properties for L3C subnode: +- compatible : Shall be "apm,xgene-pmu-l3c". +- reg : First resource shall be the L3C PMU resource. + +Required properties for IOB subnode: +- compatible : Shall be "apm,xgene-pmu-iob". +- reg : First resource shall be the IOB PMU resource. + +Required properties for MCB subnode: +- compatible : Shall be "apm,xgene-pmu-mcb". +- reg : First resource shall be the MCB PMU resource. +- enable-bit-index : The bit indicates if the according MCB is enabled. + +Required properties for MC subnode: +- compatible : Shall be "apm,xgene-pmu-mc". +- reg : First resource shall be the MC PMU resource. +- enable-bit-index : The bit indicates if the according MC is enabled. + +Example: + csw: csw@7e200000 { + compatible = "apm,xgene-csw", "syscon"; + reg = <0x0 0x7e200000 0x0 0x1000>; + }; + + mcba: mcba@7e700000 { + compatible = "apm,xgene-mcb", "syscon"; + reg = <0x0 0x7e700000 0x0 0x1000>; + }; + + mcbb: mcbb@7e720000 { + compatible = "apm,xgene-mcb", "syscon"; + reg = <0x0 0x7e720000 0x0 0x1000>; + }; + + pmu: pmu@78810000 { + compatible = "apm,xgene-pmu-v2"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + regmap-csw = <&csw>; + regmap-mcba = <&mcba>; + regmap-mcbb = <&mcbb>; + reg = <0x0 0x78810000 0x0 0x1000>; + interrupts = <0x0 0x22 0x4>; + + pmul3c@7e610000 { + compatible = "apm,xgene-pmu-l3c"; + reg = <0x0 0x7e610000 0x0 0x1000>; + }; + + pmuiob@7e940000 { + compatible = "apm,xgene-pmu-iob"; + reg = <0x0 0x7e940000 0x0 0x1000>; + }; + + pmucmcb@7e710000 { + compatible = "apm,xgene-pmu-mcb"; + reg = <0x0 0x7e710000 0x0 0x1000>; + enable-bit-index = <0>; + }; + + pmucmcb@7e730000 { + compatible = "apm,xgene-pmu-mcb"; + reg = <0x0 0x7e730000 0x0 0x1000>; + enable-bit-index = <1>; + }; + + pmucmc@7e810000 { + compatible = "apm,xgene-pmu-mc"; + reg = <0x0 0x7e810000 0x0 0x1000>; + enable-bit-index = <0>; + }; + + pmucmc@7e850000 { + compatible = "apm,xgene-pmu-mc"; + reg = <0x0 0x7e850000 0x0 0x1000>; + enable-bit-index = <1>; + }; + + pmucmc@7e890000 { + compatible = "apm,xgene-pmu-mc"; + reg = <0x0 0x7e890000 0x0 0x1000>; + enable-bit-index = <2>; + }; + + pmucmc@7e8d0000 { + compatible = "apm,xgene-pmu-mc"; + reg = <0x0 0x7e8d0000 0x0 0x1000>; + enable-bit-index = <3>; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,orion-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,orion-pinctrl.txt index 27570a3a1741..ec8aa3c6936b 100644 --- a/Documentation/devicetree/bindings/pinctrl/marvell,orion-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/marvell,orion-pinctrl.txt @@ -4,7 +4,9 @@ Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding part and usage. Required properties: -- compatible: "marvell,88f5181l-pinctrl", "marvell,88f5182-pinctrl", +- compatible: "marvell,88f5181-pinctrl", + "marvell,88f5181l-pinctrl", + "marvell,88f5182-pinctrl", "marvell,88f5281-pinctrl" - reg: two register areas, the first one describing the first two diff --git a/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt b/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt new file mode 100644 index 000000000000..01db34375192 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt @@ -0,0 +1,6 @@ +STMicroelectronics STM32 Peripheral Reset Controller +==================================================== + +The RCC IP is both a reset and a clock controller. + +Please see Documentation/devicetree/bindings/clock/st,stm32-rcc.txt diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt new file mode 100644 index 000000000000..e6bbfccd56c3 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt @@ -0,0 +1,93 @@ +UniPhier reset controller + + +System reset +------------ + +Required properties: +- compatible: should be one of the following: + "socionext,uniphier-sld3-reset" - for PH1-sLD3 SoC. + "socionext,uniphier-ld4-reset" - for PH1-LD4 SoC. + "socionext,uniphier-pro4-reset" - for PH1-Pro4 SoC. + "socionext,uniphier-sld8-reset" - for PH1-sLD8 SoC. + "socionext,uniphier-pro5-reset" - for PH1-Pro5 SoC. + "socionext,uniphier-pxs2-reset" - for ProXstream2/PH1-LD6b SoC. + "socionext,uniphier-ld11-reset" - for PH1-LD11 SoC. + "socionext,uniphier-ld20-reset" - for PH1-LD20 SoC. +- #reset-cells: should be 1. + +Example: + + sysctrl@61840000 { + compatible = "socionext,uniphier-ld20-sysctrl", + "simple-mfd", "syscon"; + reg = <0x61840000 0x4000>; + + reset { + compatible = "socionext,uniphier-ld20-reset"; + #reset-cells = <1>; + }; + + other nodes ... + }; + + +Media I/O (MIO) reset +--------------------- + +Required properties: +- compatible: should be one of the following: + "socionext,uniphier-sld3-mio-reset" - for PH1-sLD3 SoC. + "socionext,uniphier-ld4-mio-reset" - for PH1-LD4 SoC. + "socionext,uniphier-pro4-mio-reset" - for PH1-Pro4 SoC. + "socionext,uniphier-sld8-mio-reset" - for PH1-sLD8 SoC. + "socionext,uniphier-pro5-mio-reset" - for PH1-Pro5 SoC. + "socionext,uniphier-pxs2-mio-reset" - for ProXstream2/PH1-LD6b SoC. + "socionext,uniphier-ld11-mio-reset" - for PH1-LD11 SoC. + "socionext,uniphier-ld20-mio-reset" - for PH1-LD20 SoC. +- #reset-cells: should be 1. + +Example: + + mioctrl@59810000 { + compatible = "socionext,uniphier-ld20-mioctrl", + "simple-mfd", "syscon"; + reg = <0x59810000 0x800>; + + reset { + compatible = "socionext,uniphier-ld20-mio-reset"; + #reset-cells = <1>; + }; + + other nodes ... + }; + + +Peripheral reset +---------------- + +Required properties: +- compatible: should be one of the following: + "socionext,uniphier-ld4-peri-reset" - for PH1-LD4 SoC. + "socionext,uniphier-pro4-peri-reset" - for PH1-Pro4 SoC. + "socionext,uniphier-sld8-peri-reset" - for PH1-sLD8 SoC. + "socionext,uniphier-pro5-peri-reset" - for PH1-Pro5 SoC. + "socionext,uniphier-pxs2-peri-reset" - for ProXstream2/PH1-LD6b SoC. + "socionext,uniphier-ld11-peri-reset" - for PH1-LD11 SoC. + "socionext,uniphier-ld20-peri-reset" - for PH1-LD20 SoC. +- #reset-cells: should be 1. + +Example: + + perictrl@59820000 { + compatible = "socionext,uniphier-ld20-perictrl", + "simple-mfd", "syscon"; + reg = <0x59820000 0x200>; + + reset { + compatible = "socionext,uniphier-ld20-peri-reset"; + #reset-cells = <1>; + }; + + other nodes ... + }; diff --git a/Documentation/perf/xgene-pmu.txt b/Documentation/perf/xgene-pmu.txt new file mode 100644 index 000000000000..d7cff4454e5b --- /dev/null +++ b/Documentation/perf/xgene-pmu.txt @@ -0,0 +1,48 @@ +APM X-Gene SoC Performance Monitoring Unit (PMU) +================================================ + +X-Gene SoC PMU consists of various independent system device PMUs such as +L3 cache(s), I/O bridge(s), memory controller bridge(s) and memory +controller(s). These PMU devices are loosely architected to follow the +same model as the PMU for ARM cores. The PMUs share the same top level +interrupt and status CSR region. + +PMU (perf) driver +----------------- + +The xgene-pmu driver registers several perf PMU drivers. Each of the perf +driver provides description of its available events and configuration options +in sysfs, see /sys/devices/<l3cX/iobX/mcbX/mcX>/. + +The "format" directory describes format of the config (event ID), +config1 (agent ID) fields of the perf_event_attr structure. The "events" +directory provides configuration templates for all supported event types that +can be used with perf tool. For example, "l3c0/bank-fifo-full/" is an +equivalent of "l3c0/config=0x0b/". + +Most of the SoC PMU has a specific list of agent ID used for monitoring +performance of a specific datapath. For example, agents of a L3 cache can be +a specific CPU or an I/O bridge. Each PMU has a set of 2 registers capable of +masking the agents from which the request come from. If the bit with +the bit number corresponding to the agent is set, the event is counted only if +it is caused by a request from that agent. Each agent ID bit is inversely mapped +to a corresponding bit in "config1" field. By default, the event will be +counted for all agent requests (config1 = 0x0). For all the supported agents of +each PMU, please refer to APM X-Gene User Manual. + +Each perf driver also provides a "cpumask" sysfs attribute, which contains a +single CPU ID of the processor which will be used to handle all the PMU events. + +Example for perf tool use: + + / # perf list | grep -e l3c -e iob -e mcb -e mc + l3c0/ackq-full/ [Kernel PMU event] + <...> + mcb1/mcb-csw-stall/ [Kernel PMU event] + + / # perf stat -a -e l3c0/read-miss/,mcb1/csw-write-request/ sleep 1 + + / # perf stat -a -e l3c0/read-miss,config1=0xfffffffffffffffe/ sleep 1 + +The driver does not support sampling, therefore "perf record" will +not work. Per-task (without "-a") perf sessions are not supported. diff --git a/MAINTAINERS b/MAINTAINERS index ca045832471a..8a5ce7d0b320 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -866,6 +866,13 @@ F: drivers/net/phy/mdio-xgene.c F: Documentation/devicetree/bindings/net/apm-xgene-enet.txt F: Documentation/devicetree/bindings/net/apm-xgene-mdio.txt +APPLIED MICRO (APM) X-GENE SOC PMU +M: Tai Nguyen <ttnguyen@apm.com> +S: Supported +F: drivers/perf/xgene_pmu.c +F: Documentation/perf/xgene-pmu.txt +F: Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt + APTINA CAMERA SENSOR PLL M: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> L: linux-media@vger.kernel.org @@ -1861,6 +1868,7 @@ F: drivers/bus/uniphier-system-bus.c F: drivers/clk/uniphier/ F: drivers/i2c/busses/i2c-uniphier* F: drivers/pinctrl/uniphier/ +F: drivers/reset/reset-uniphier.c F: drivers/tty/serial/8250/8250_uniphier.c N: uniphier diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index 1a189d44ad38..2e0741b3de60 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -334,6 +334,7 @@ }; rcc: rcc@40023810 { + #reset-cells = <1>; #clock-cells = <2>; compatible = "st,stm32f42xx-rcc", "st,stm32-rcc"; reg = <0x40023800 0x400>; diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig index 3b205e212337..7010dcac9328 100644 --- a/drivers/bus/Kconfig +++ b/drivers/bus/Kconfig @@ -108,6 +108,14 @@ config OMAP_OCP2SCP OCP2SCP and in OMAP5, both USB PHY and SATA PHY is connected via OCP2SCP. +config QCOM_EBI2 + bool "Qualcomm External Bus Interface 2 (EBI2)" + depends on HAS_IOMEM + help + Say y here to enable support for the Qualcomm External Bus + Interface 2, which can be used to connect things like NAND Flash, + SRAM, ethernet adapters, FPGAs and LCD displays. + config SIMPLE_PM_BUS bool "Simple Power-Managed Bus Driver" depends on OF && PM @@ -132,12 +140,8 @@ config SUNXI_RSB with various RSB based devices, such as AXP223, AXP8XX PMICs, and AC100/AC200 ICs. -# TODO: This uses pm_clk_*() symbols that aren't exported in v4.7 and hence -# the driver will fail to build as a module. However there are patches to -# address that queued for v4.8, so this can be turned into a tristate symbol -# after v4.8-rc1. config TEGRA_ACONNECT - bool "Tegra ACONNECT Bus Driver" + tristate "Tegra ACONNECT Bus Driver" depends on ARCH_TEGRA_210_SOC depends on OF && PM select PM_CLK diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile index ac84cc4348e3..c6cfa6b2606e 100644 --- a/drivers/bus/Makefile +++ b/drivers/bus/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_MVEBU_MBUS) += mvebu-mbus.o obj-$(CONFIG_OMAP_INTERCONNECT) += omap_l3_smx.o omap_l3_noc.o obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o +obj-$(CONFIG_QCOM_EBI2) += qcom-ebi2.o obj-$(CONFIG_SUNXI_RSB) += sunxi-rsb.o obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o obj-$(CONFIG_TEGRA_ACONNECT) += tegra-aconnect.o diff --git a/drivers/bus/qcom-ebi2.c b/drivers/bus/qcom-ebi2.c new file mode 100644 index 000000000000..a6444244c411 --- /dev/null +++ b/drivers/bus/qcom-ebi2.c @@ -0,0 +1,408 @@ +/* + * Qualcomm External Bus Interface 2 (EBI2) driver + * an older version of the Qualcomm Parallel Interface Controller (QPIC) + * + * Copyright (C) 2016 Linaro Ltd. + * + * Author: Linus Walleij <linus.walleij@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + * See the device tree bindings for this block for more details on the + * hardware. + */ + +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/bitops.h> + +/* + * CS0, CS1, CS4 and CS5 are two bits wide, CS2 and CS3 are one bit. + */ +#define EBI2_CS0_ENABLE_MASK BIT(0)|BIT(1) +#define EBI2_CS1_ENABLE_MASK BIT(2)|BIT(3) +#define EBI2_CS2_ENABLE_MASK BIT(4) +#define EBI2_CS3_ENABLE_MASK BIT(5) +#define EBI2_CS4_ENABLE_MASK BIT(6)|BIT(7) +#define EBI2_CS5_ENABLE_MASK BIT(8)|BIT(9) +#define EBI2_CSN_MASK GENMASK(9, 0) + +#define EBI2_XMEM_CFG 0x0000 /* Power management etc */ + +/* + * SLOW CSn CFG + * + * Bits 31-28: RECOVERY recovery cycles (0 = 1, 1 = 2 etc) this is the time the + * memory continues to drive the data bus after OE is de-asserted. + * Inserted when reading one CS and switching to another CS or read + * followed by write on the same CS. Valid values 0 thru 15. + * Bits 27-24: WR_HOLD write hold cycles, these are extra cycles inserted after + * every write minimum 1. The data out is driven from the time WE is + * asserted until CS is asserted. With a hold of 1, the CS stays + * active for 1 extra cycle etc. Valid values 0 thru 15. + * Bits 23-16: WR_DELTA initial latency for write cycles inserted for the first + * write to a page or burst memory + * Bits 15-8: RD_DELTA initial latency for read cycles inserted for the first + * read to a page or burst memory + * Bits 7-4: WR_WAIT number of wait cycles for every write access, 0=1 cycle + * so 1 thru 16 cycles. + * Bits 3-0: RD_WAIT number of wait cycles for every read access, 0=1 cycle + * so 1 thru 16 cycles. + */ +#define EBI2_XMEM_CS0_SLOW_CFG 0x0008 +#define EBI2_XMEM_CS1_SLOW_CFG 0x000C +#define EBI2_XMEM_CS2_SLOW_CFG 0x0010 +#define EBI2_XMEM_CS3_SLOW_CFG 0x0014 +#define EBI2_XMEM_CS4_SLOW_CFG 0x0018 +#define EBI2_XMEM_CS5_SLOW_CFG 0x001C + +#define EBI2_XMEM_RECOVERY_SHIFT 28 +#define EBI2_XMEM_WR_HOLD_SHIFT 24 +#define EBI2_XMEM_WR_DELTA_SHIFT 16 +#define EBI2_XMEM_RD_DELTA_SHIFT 8 +#define EBI2_XMEM_WR_WAIT_SHIFT 4 +#define EBI2_XMEM_RD_WAIT_SHIFT 0 + +/* + * FAST CSn CFG + * Bits 31-28: ? + * Bits 27-24: RD_HOLD: the length in cycles of the first segment of a read + * transfer. For a single read trandfer this will be the time + * from CS assertion to OE assertion. + * Bits 18-24: ? + * Bits 17-16: ADV_OE_RECOVERY, the number of cycles elapsed before an OE + * assertion, with respect to the cycle where ADV is asserted. + * 2 means 2 cycles between ADV and OE. Values 0, 1, 2 or 3. + * Bits 5: ADDR_HOLD_ENA, The address is held for an extra cycle to meet + * hold time requirements with ADV assertion. + * + * The manual mentions "write precharge cycles" and "precharge cycles". + * We have not been able to figure out which bit fields these correspond to + * in the hardware, or what valid values exist. The current hypothesis is that + * this is something just used on the FAST chip selects. There is also a "byte + * device enable" flag somewhere for 8bit memories. + */ +#define EBI2_XMEM_CS0_FAST_CFG 0x0028 +#define EBI2_XMEM_CS1_FAST_CFG 0x002C +#define EBI2_XMEM_CS2_FAST_CFG 0x0030 +#define EBI2_XMEM_CS3_FAST_CFG 0x0034 +#define EBI2_XMEM_CS4_FAST_CFG 0x0038 +#define EBI2_XMEM_CS5_FAST_CFG 0x003C + +#define EBI2_XMEM_RD_HOLD_SHIFT 24 +#define EBI2_XMEM_ADV_OE_RECOVERY_SHIFT 16 +#define EBI2_XMEM_ADDR_HOLD_ENA_SHIFT 5 + +/** + * struct cs_data - struct with info on a chipselect setting + * @enable_mask: mask to enable the chipselect in the EBI2 config + * @slow_cfg0: offset to XMEMC slow CS config + * @fast_cfg1: offset to XMEMC fast CS config + */ +struct cs_data { + u32 enable_mask; + u16 slow_cfg; + u16 fast_cfg; +}; + +static const struct cs_data cs_info[] = { + { + /* CS0 */ + .enable_mask = EBI2_CS0_ENABLE_MASK, + .slow_cfg = EBI2_XMEM_CS0_SLOW_CFG, + .fast_cfg = EBI2_XMEM_CS0_FAST_CFG, + }, + { + /* CS1 */ + .enable_mask = EBI2_CS1_ENABLE_MASK, + .slow_cfg = EBI2_XMEM_CS1_SLOW_CFG, + .fast_cfg = EBI2_XMEM_CS1_FAST_CFG, + }, + { + /* CS2 */ + .enable_mask = EBI2_CS2_ENABLE_MASK, + .slow_cfg = EBI2_XMEM_CS2_SLOW_CFG, + .fast_cfg = EBI2_XMEM_CS2_FAST_CFG, + }, + { + /* CS3 */ + .enable_mask = EBI2_CS3_ENABLE_MASK, + .slow_cfg = EBI2_XMEM_CS3_SLOW_CFG, + .fast_cfg = EBI2_XMEM_CS3_FAST_CFG, + }, + { + /* CS4 */ + .enable_mask = EBI2_CS4_ENABLE_MASK, + .slow_cfg = EBI2_XMEM_CS4_SLOW_CFG, + .fast_cfg = EBI2_XMEM_CS4_FAST_CFG, + }, + { + /* CS5 */ + .enable_mask = EBI2_CS5_ENABLE_MASK, + .slow_cfg = EBI2_XMEM_CS5_SLOW_CFG, + .fast_cfg = EBI2_XMEM_CS5_FAST_CFG, + }, +}; + +/** + * struct ebi2_xmem_prop - describes an XMEM config property + * @prop: the device tree binding name + * @max: maximum value for the property + * @slowreg: true if this property is in the SLOW CS config register + * else it is assumed to be in the FAST config register + * @shift: the bit field start in the SLOW or FAST register for this + * property + */ +struct ebi2_xmem_prop { + const char *prop; + u32 max; + bool slowreg; + u16 shift; +}; + +static const struct ebi2_xmem_prop xmem_props[] = { + { + .prop = "qcom,xmem-recovery-cycles", + .max = 15, + .slowreg = true, + .shift = EBI2_XMEM_RECOVERY_SHIFT, + }, + { + .prop = "qcom,xmem-write-hold-cycles", + .max = 15, + .slowreg = true, + .shift = EBI2_XMEM_WR_HOLD_SHIFT, + }, + { + .prop = "qcom,xmem-write-delta-cycles", + .max = 255, + .slowreg = true, + .shift = EBI2_XMEM_WR_DELTA_SHIFT, + }, + { + .prop = "qcom,xmem-read-delta-cycles", + .max = 255, + .slowreg = true, + .shift = EBI2_XMEM_RD_DELTA_SHIFT, + }, + { + .prop = "qcom,xmem-write-wait-cycles", + .max = 15, + .slowreg = true, + .shift = EBI2_XMEM_WR_WAIT_SHIFT, + }, + { + .prop = "qcom,xmem-read-wait-cycles", + .max = 15, + .slowreg = true, + .shift = EBI2_XMEM_RD_WAIT_SHIFT, + }, + { + .prop = "qcom,xmem-address-hold-enable", + .max = 1, /* boolean prop */ + .slowreg = false, + .shift = EBI2_XMEM_ADDR_HOLD_ENA_SHIFT, + }, + { + .prop = "qcom,xmem-adv-to-oe-recovery-cycles", + .max = 3, + .slowreg = false, + .shift = EBI2_XMEM_ADV_OE_RECOVERY_SHIFT, + }, + { + .prop = "qcom,xmem-read-hold-cycles", + .max = 15, + .slowreg = false, + .shift = EBI2_XMEM_RD_HOLD_SHIFT, + }, +}; + +static void qcom_ebi2_setup_chipselect(struct device_node *np, + struct device *dev, + void __iomem *ebi2_base, + void __iomem *ebi2_xmem, + u32 csindex) +{ + const struct cs_data *csd; + u32 slowcfg, fastcfg; + u32 val; + int ret; + int i; + + csd = &cs_info[csindex]; + val = readl(ebi2_base); + val |= csd->enable_mask; + writel(val, ebi2_base); + dev_dbg(dev, "enabled CS%u\n", csindex); + + /* Next set up the XMEMC */ + slowcfg = 0; + fastcfg = 0; + + for (i = 0; i < ARRAY_SIZE(xmem_props); i++) { + const struct ebi2_xmem_prop *xp = &xmem_props[i]; + + /* All are regular u32 values */ + ret = of_property_read_u32(np, xp->prop, &val); + if (ret) { + dev_dbg(dev, "could not read %s for CS%d\n", + xp->prop, csindex); + continue; + } + + /* First check boolean props */ + if (xp->max == 1 && val) { + if (xp->slowreg) + slowcfg |= BIT(xp->shift); + else + fastcfg |= BIT(xp->shift); + dev_dbg(dev, "set %s flag\n", xp->prop); + continue; + } + + /* We're dealing with an u32 */ + if (val > xp->max) { + dev_err(dev, + "too high value for %s: %u, capped at %u\n", + xp->prop, val, xp->max); + val = xp->max; + } + if (xp->slowreg) + slowcfg |= (val << xp->shift); + else + fastcfg |= (val << xp->shift); + dev_dbg(dev, "set %s to %u\n", xp->prop, val); + } + + dev_info(dev, "CS%u: SLOW CFG 0x%08x, FAST CFG 0x%08x\n", + csindex, slowcfg, fastcfg); + + if (slowcfg) + writel(slowcfg, ebi2_xmem + csd->slow_cfg); + if (fastcfg) + writel(fastcfg, ebi2_xmem + csd->fast_cfg); +} + +static int qcom_ebi2_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct device_node *child; + struct device *dev = &pdev->dev; + struct resource *res; + void __iomem *ebi2_base; + void __iomem *ebi2_xmem; + struct clk *ebi2xclk; + struct clk *ebi2clk; + bool have_children = false; + u32 val; + int ret; + + ebi2xclk = devm_clk_get(dev, "ebi2x"); + if (IS_ERR(ebi2xclk)) + return PTR_ERR(ebi2xclk); + + ret = clk_prepare_enable(ebi2xclk); + if (ret) { + dev_err(dev, "could not enable EBI2X clk (%d)\n", ret); + return ret; + } + + ebi2clk = devm_clk_get(dev, "ebi2"); + if (IS_ERR(ebi2clk)) { + ret = PTR_ERR(ebi2clk); + goto err_disable_2x_clk; + } + + ret = clk_prepare_enable(ebi2clk); + if (ret) { + dev_err(dev, "could not enable EBI2 clk\n"); + goto err_disable_2x_clk; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + ebi2_base = devm_ioremap_resource(dev, res); + if (IS_ERR(ebi2_base)) { + ret = PTR_ERR(ebi2_base); + goto err_disable_clk; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + ebi2_xmem = devm_ioremap_resource(dev, res); + if (IS_ERR(ebi2_xmem)) { + ret = PTR_ERR(ebi2_xmem); + goto err_disable_clk; + } + + /* Allegedly this turns the power save mode off */ + writel(0UL, ebi2_xmem + EBI2_XMEM_CFG); + + /* Disable all chipselects */ + val = readl(ebi2_base); + val &= ~EBI2_CSN_MASK; + writel(val, ebi2_base); + + /* Walk over the child nodes and see what chipselects we use */ + for_each_available_child_of_node(np, child) { + u32 csindex; + + /* Figure out the chipselect */ + ret = of_property_read_u32(child, "reg", &csindex); + if (ret) + return ret; + + if (csindex > 5) { + dev_err(dev, + "invalid chipselect %u, we only support 0-5\n", + csindex); + continue; + } + + qcom_ebi2_setup_chipselect(child, + dev, + ebi2_base, + ebi2_xmem, + csindex); + + /* We have at least one child */ + have_children = true; + } + + if (have_children) + return of_platform_default_populate(np, NULL, dev); + return 0; + +err_disable_clk: + clk_disable_unprepare(ebi2clk); +err_disable_2x_clk: + clk_disable_unprepare(ebi2xclk); + + return ret; +} + +static const struct of_device_id qcom_ebi2_of_match[] = { + { .compatible = "qcom,msm8660-ebi2", }, + { .compatible = "qcom,apq8060-ebi2", }, + { } +}; + +static struct platform_driver qcom_ebi2_driver = { + .probe = qcom_ebi2_probe, + .driver = { + .name = "qcom-ebi2", + .of_match_table = qcom_ebi2_of_match, + }, +}; +module_platform_driver(qcom_ebi2_driver); +MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); +MODULE_DESCRIPTION("Qualcomm EBI2 driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/bus/tegra-aconnect.c b/drivers/bus/tegra-aconnect.c index 7e4104b74fa8..084ae286fa23 100644 --- a/drivers/bus/tegra-aconnect.c +++ b/drivers/bus/tegra-aconnect.c @@ -15,24 +15,6 @@ #include <linux/pm_clock.h> #include <linux/pm_runtime.h> -static int tegra_aconnect_add_clock(struct device *dev, char *name) -{ - struct clk *clk; - int ret; - - clk = clk_get(dev, name); - if (IS_ERR(clk)) { - dev_err(dev, "%s clock not found\n", name); - return PTR_ERR(clk); - } - - ret = pm_clk_add_clk(dev, clk); - if (ret) - clk_put(clk); - - return ret; -} - static int tegra_aconnect_probe(struct platform_device *pdev) { int ret; @@ -44,11 +26,11 @@ static int tegra_aconnect_probe(struct platform_device *pdev) if (ret) return ret; - ret = tegra_aconnect_add_clock(&pdev->dev, "ape"); + ret = of_pm_clk_add_clk(&pdev->dev, "ape"); if (ret) goto clk_destroy; - ret = tegra_aconnect_add_clock(&pdev->dev, "apb2ape"); + ret = of_pm_clk_add_clk(&pdev->dev, "apb2ape"); if (ret) goto clk_destroy; diff --git a/drivers/clk/mvebu/orion.c b/drivers/clk/mvebu/orion.c index fd129566c1ce..a6e5bee23385 100644 --- a/drivers/clk/mvebu/orion.c +++ b/drivers/clk/mvebu/orion.c @@ -21,6 +21,76 @@ static const struct coreclk_ratio orion_coreclk_ratios[] __initconst = { }; /* + * Orion 5181 + */ + +#define SAR_MV88F5181_TCLK_FREQ 8 +#define SAR_MV88F5181_TCLK_FREQ_MASK 0x3 + +static u32 __init mv88f5181_get_tclk_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_MV88F5181_TCLK_FREQ) & + SAR_MV88F5181_TCLK_FREQ_MASK; + if (opt == 0) + return 133333333; + else if (opt == 1) + return 150000000; + else if (opt == 2) + return 166666667; + else + return 0; +} + +#define SAR_MV88F5181_CPU_FREQ 4 +#define SAR_MV88F5181_CPU_FREQ_MASK 0xf + +static u32 __init mv88f5181_get_cpu_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_MV88F5181_CPU_FREQ) & + SAR_MV88F5181_CPU_FREQ_MASK; + if (opt == 0) + return 333333333; + else if (opt == 1 || opt == 2) + return 400000000; + else if (opt == 3) + return 500000000; + else + return 0; +} + +static void __init mv88f5181_get_clk_ratio(void __iomem *sar, int id, + int *mult, int *div) +{ + u32 opt = (readl(sar) >> SAR_MV88F5181_CPU_FREQ) & + SAR_MV88F5181_CPU_FREQ_MASK; + if (opt == 0 || opt == 1) { + *mult = 1; + *div = 2; + } else if (opt == 2 || opt == 3) { + *mult = 1; + *div = 3; + } else { + *mult = 0; + *div = 1; + } +} + +static const struct coreclk_soc_desc mv88f5181_coreclks = { + .get_tclk_freq = mv88f5181_get_tclk_freq, + .get_cpu_freq = mv88f5181_get_cpu_freq, + .get_clk_ratio = mv88f5181_get_clk_ratio, + .ratios = orion_coreclk_ratios, + .num_ratios = ARRAY_SIZE(orion_coreclk_ratios), +}; + +static void __init mv88f5181_clk_init(struct device_node *np) +{ + return mvebu_coreclk_setup(np, &mv88f5181_coreclks); +} + +CLK_OF_DECLARE(mv88f5181_clk, "marvell,mv88f5181-core-clock", mv88f5181_clk_init); + +/* * Orion 5182 */ diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 8a753fd5b79d..245190839359 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -361,7 +361,7 @@ config CLKSRC_METAG_GENERIC config CLKSRC_EXYNOS_MCT bool "Exynos multi core timer driver" if COMPILE_TEST - depends on ARM + depends on ARM || ARM64 help Support for Multi Core Timer controller on Exynos SoCs. diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c index 41840d02c331..8f3488b80896 100644 --- a/drivers/clocksource/exynos_mct.c +++ b/drivers/clocksource/exynos_mct.c @@ -223,6 +223,7 @@ static u64 notrace exynos4_read_sched_clock(void) return exynos4_read_count_32(); } +#if defined(CONFIG_ARM) static struct delay_timer exynos4_delay_timer; static cycles_t exynos4_read_current_timer(void) @@ -231,14 +232,17 @@ static cycles_t exynos4_read_current_timer(void) "cycles_t needs to move to 32-bit for ARM64 usage"); return exynos4_read_count_32(); } +#endif static int __init exynos4_clocksource_init(void) { exynos4_mct_frc_start(); +#if defined(CONFIG_ARM) exynos4_delay_timer.read_current_timer = &exynos4_read_current_timer; exynos4_delay_timer.freq = clk_rate; register_current_timer_delay(&exynos4_delay_timer); +#endif if (clocksource_register_hz(&mct_frc, clk_rate)) panic("%s: can't register clocksource\n", mct_frc.name); diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index 0e22f241403b..bca172d42c74 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -209,5 +209,6 @@ config HAVE_ARM_SMCCC source "drivers/firmware/broadcom/Kconfig" source "drivers/firmware/google/Kconfig" source "drivers/firmware/efi/Kconfig" +source "drivers/firmware/meson/Kconfig" endmenu diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile index 44a59dcfc398..898ac41fa8b3 100644 --- a/drivers/firmware/Makefile +++ b/drivers/firmware/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_QCOM_SCM_32) += qcom_scm-32.o CFLAGS_qcom_scm-32.o :=$(call as-instr,.arch armv7-a\n.arch_extension sec,-DREQUIRES_SEC=1) -march=armv7-a obj-y += broadcom/ +obj-y += meson/ obj-$(CONFIG_GOOGLE_FIRMWARE) += google/ obj-$(CONFIG_EFI) += efi/ obj-$(CONFIG_UEFI_CPER) += efi/ diff --git a/drivers/firmware/meson/Kconfig b/drivers/firmware/meson/Kconfig new file mode 100644 index 000000000000..170d7e8bcdfb --- /dev/null +++ b/drivers/firmware/meson/Kconfig @@ -0,0 +1,9 @@ +# +# Amlogic Secure Monitor driver +# +config MESON_SM + bool + default ARCH_MESON + depends on ARM64_4K_PAGES + help + Say y here to enable the Amlogic secure monitor driver diff --git a/drivers/firmware/meson/Makefile b/drivers/firmware/meson/Makefile new file mode 100644 index 000000000000..9ab3884f96bc --- /dev/null +++ b/drivers/firmware/meson/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_MESON_SM) += meson_sm.o diff --git a/drivers/firmware/meson/meson_sm.c b/drivers/firmware/meson/meson_sm.c new file mode 100644 index 000000000000..b0d254930ed3 --- /dev/null +++ b/drivers/firmware/meson/meson_sm.c @@ -0,0 +1,248 @@ +/* + * Amlogic Secure Monitor driver + * + * Copyright (C) 2016 Endless Mobile, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#define pr_fmt(fmt) "meson-sm: " fmt + +#include <linux/arm-smccc.h> +#include <linux/bug.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/printk.h> +#include <linux/types.h> +#include <linux/sizes.h> + +#include <linux/firmware/meson/meson_sm.h> + +struct meson_sm_cmd { + unsigned int index; + u32 smc_id; +}; +#define CMD(d, s) { .index = (d), .smc_id = (s), } + +struct meson_sm_chip { + unsigned int shmem_size; + u32 cmd_shmem_in_base; + u32 cmd_shmem_out_base; + struct meson_sm_cmd cmd[]; +}; + +struct meson_sm_chip gxbb_chip = { + .shmem_size = SZ_4K, + .cmd_shmem_in_base = 0x82000020, + .cmd_shmem_out_base = 0x82000021, + .cmd = { + CMD(SM_EFUSE_READ, 0x82000030), + CMD(SM_EFUSE_WRITE, 0x82000031), + CMD(SM_EFUSE_USER_MAX, 0x82000033), + { /* sentinel */ }, + }, +}; + +struct meson_sm_firmware { + const struct meson_sm_chip *chip; + void __iomem *sm_shmem_in_base; + void __iomem *sm_shmem_out_base; +}; + +static struct meson_sm_firmware fw; + +static u32 meson_sm_get_cmd(const struct meson_sm_chip *chip, + unsigned int cmd_index) +{ + const struct meson_sm_cmd *cmd = chip->cmd; + + while (cmd->smc_id && cmd->index != cmd_index) + cmd++; + + return cmd->smc_id; +} + +static u32 __meson_sm_call(u32 cmd, u32 arg0, u32 arg1, u32 arg2, + u32 arg3, u32 arg4) +{ + struct arm_smccc_res res; + + arm_smccc_smc(cmd, arg0, arg1, arg2, arg3, arg4, 0, 0, &res); + return res.a0; +} + +static void __iomem *meson_sm_map_shmem(u32 cmd_shmem, unsigned int size) +{ + u32 sm_phy_base; + + sm_phy_base = __meson_sm_call(cmd_shmem, 0, 0, 0, 0, 0); + if (!sm_phy_base) + return 0; + + return ioremap_cache(sm_phy_base, size); +} + +/** + * meson_sm_call - generic SMC32 call to the secure-monitor + * + * @cmd_index: Index of the SMC32 function ID + * @ret: Returned value + * @arg0: SMC32 Argument 0 + * @arg1: SMC32 Argument 1 + * @arg2: SMC32 Argument 2 + * @arg3: SMC32 Argument 3 + * @arg4: SMC32 Argument 4 + * + * Return: 0 on success, a negative value on error + */ +int meson_sm_call(unsigned int cmd_index, u32 *ret, u32 arg0, + u32 arg1, u32 arg2, u32 arg3, u32 arg4) +{ + u32 cmd, lret; + + if (!fw.chip) + return -ENOENT; + + cmd = meson_sm_get_cmd(fw.chip, cmd_index); + if (!cmd) + return -EINVAL; + + lret = __meson_sm_call(cmd, arg0, arg1, arg2, arg3, arg4); + + if (ret) + *ret = lret; + + return 0; +} +EXPORT_SYMBOL(meson_sm_call); + +/** + * meson_sm_call_read - retrieve data from secure-monitor + * + * @buffer: Buffer to store the retrieved data + * @cmd_index: Index of the SMC32 function ID + * @arg0: SMC32 Argument 0 + * @arg1: SMC32 Argument 1 + * @arg2: SMC32 Argument 2 + * @arg3: SMC32 Argument 3 + * @arg4: SMC32 Argument 4 + * + * Return: size of read data on success, a negative value on error + */ +int meson_sm_call_read(void *buffer, unsigned int cmd_index, u32 arg0, + u32 arg1, u32 arg2, u32 arg3, u32 arg4) +{ + u32 size; + + if (!fw.chip) + return -ENOENT; + + if (!fw.chip->cmd_shmem_out_base) + return -EINVAL; + + if (meson_sm_call(cmd_index, &size, arg0, arg1, arg2, arg3, arg4) < 0) + return -EINVAL; + + if (!size || size > fw.chip->shmem_size) + return -EINVAL; + + if (buffer) + memcpy(buffer, fw.sm_shmem_out_base, size); + + return size; +} +EXPORT_SYMBOL(meson_sm_call_read); + +/** + * meson_sm_call_write - send data to secure-monitor + * + * @buffer: Buffer containing data to send + * @size: Size of the data to send + * @cmd_index: Index of the SMC32 function ID + * @arg0: SMC32 Argument 0 + * @arg1: SMC32 Argument 1 + * @arg2: SMC32 Argument 2 + * @arg3: SMC32 Argument 3 + * @arg4: SMC32 Argument 4 + * + * Return: size of sent data on success, a negative value on error + */ +int meson_sm_call_write(void *buffer, unsigned int size, unsigned int cmd_index, + u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4) +{ + u32 written; + + if (!fw.chip) + return -ENOENT; + + if (size > fw.chip->shmem_size) + return -EINVAL; + + if (!fw.chip->cmd_shmem_in_base) + return -EINVAL; + + memcpy(fw.sm_shmem_in_base, buffer, size); + + if (meson_sm_call(cmd_index, &written, arg0, arg1, arg2, arg3, arg4) < 0) + return -EINVAL; + + if (!written) + return -EINVAL; + + return written; +} +EXPORT_SYMBOL(meson_sm_call_write); + +static const struct of_device_id meson_sm_ids[] = { + { .compatible = "amlogic,meson-gxbb-sm", .data = &gxbb_chip }, + { /* sentinel */ }, +}; + +int __init meson_sm_init(void) +{ + const struct meson_sm_chip *chip; + const struct of_device_id *matched_np; + struct device_node *np; + + np = of_find_matching_node_and_match(NULL, meson_sm_ids, &matched_np); + if (!np) + return -ENODEV; + + chip = matched_np->data; + if (!chip) { + pr_err("unable to setup secure-monitor data\n"); + goto out; + } + + if (chip->cmd_shmem_in_base) { + fw.sm_shmem_in_base = meson_sm_map_shmem(chip->cmd_shmem_in_base, + chip->shmem_size); + if (WARN_ON(!fw.sm_shmem_in_base)) + goto out; + } + + if (chip->cmd_shmem_out_base) { + fw.sm_shmem_out_base = meson_sm_map_shmem(chip->cmd_shmem_out_base, + chip->shmem_size); + if (WARN_ON(!fw.sm_shmem_out_base)) + goto out_in_base; + } + + fw.chip = chip; + pr_info("secure-monitor enabled\n"); + + return 0; + +out_in_base: + iounmap(fw.sm_shmem_in_base); +out: + return -EINVAL; +} +device_initcall(meson_sm_init); diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c index e64a501adbf4..d95c70227c05 100644 --- a/drivers/firmware/qcom_scm.c +++ b/drivers/firmware/qcom_scm.c @@ -1,4 +1,7 @@ -/* Copyright (c) 2010,2015, The Linux Foundation. All rights reserved. +/* + * Qualcomm SCM driver + * + * Copyright (c) 2010,2015, The Linux Foundation. All rights reserved. * Copyright (C) 2015 Linaro Ltd. * * This program is free software; you can redistribute it and/or modify @@ -12,7 +15,7 @@ * */ #include <linux/platform_device.h> -#include <linux/module.h> +#include <linux/init.h> #include <linux/cpumask.h> #include <linux/export.h> #include <linux/dma-mapping.h> @@ -376,8 +379,6 @@ static const struct of_device_id qcom_scm_dt_match[] = { {} }; -MODULE_DEVICE_TABLE(of, qcom_scm_dt_match); - static struct platform_driver qcom_scm_driver = { .driver = { .name = "qcom_scm", @@ -414,14 +415,4 @@ static int __init qcom_scm_init(void) return platform_driver_register(&qcom_scm_driver); } - subsys_initcall(qcom_scm_init); - -static void __exit qcom_scm_exit(void) -{ - platform_driver_unregister(&qcom_scm_driver); -} -module_exit(qcom_scm_exit); - -MODULE_DESCRIPTION("Qualcomm SCM driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/rc/meson-ir.c b/drivers/media/rc/meson-ir.c index fcc3b82d1454..003fff07ade2 100644 --- a/drivers/media/rc/meson-ir.c +++ b/drivers/media/rc/meson-ir.c @@ -24,6 +24,7 @@ #define DRIVER_NAME "meson-ir" +/* valid on all Meson platforms */ #define IR_DEC_LDR_ACTIVE 0x00 #define IR_DEC_LDR_IDLE 0x04 #define IR_DEC_LDR_REPEAT 0x08 @@ -32,12 +33,21 @@ #define IR_DEC_FRAME 0x14 #define IR_DEC_STATUS 0x18 #define IR_DEC_REG1 0x1c +/* only available on Meson 8b and newer */ +#define IR_DEC_REG2 0x20 #define REG0_RATE_MASK (BIT(11) - 1) -#define REG1_MODE_MASK (BIT(7) | BIT(8)) -#define REG1_MODE_NEC (0 << 7) -#define REG1_MODE_GENERAL (2 << 7) +#define DECODE_MODE_NEC 0x0 +#define DECODE_MODE_RAW 0x2 + +/* Meson 6b uses REG1 to configure the mode */ +#define REG1_MODE_MASK GENMASK(8, 7) +#define REG1_MODE_SHIFT 7 + +/* Meson 8b / GXBB use REG2 to configure the mode */ +#define REG2_MODE_MASK GENMASK(3, 0) +#define REG2_MODE_SHIFT 0 #define REG1_TIME_IV_SHIFT 16 #define REG1_TIME_IV_MASK ((BIT(13) - 1) << REG1_TIME_IV_SHIFT) @@ -158,8 +168,15 @@ static int meson_ir_probe(struct platform_device *pdev) /* Reset the decoder */ meson_ir_set_mask(ir, IR_DEC_REG1, REG1_RESET, REG1_RESET); meson_ir_set_mask(ir, IR_DEC_REG1, REG1_RESET, 0); - /* Set general operation mode */ - meson_ir_set_mask(ir, IR_DEC_REG1, REG1_MODE_MASK, REG1_MODE_GENERAL); + + /* Set general operation mode (= raw/software decoding) */ + if (of_device_is_compatible(node, "amlogic,meson6-ir")) + meson_ir_set_mask(ir, IR_DEC_REG1, REG1_MODE_MASK, + DECODE_MODE_RAW << REG1_MODE_SHIFT); + else + meson_ir_set_mask(ir, IR_DEC_REG2, REG2_MODE_MASK, + DECODE_MODE_RAW << REG2_MODE_SHIFT); + /* Set rate */ meson_ir_set_mask(ir, IR_DEC_REG0, REG0_RATE_MASK, MESON_TRATE - 1); /* IRQ on rising and falling edges */ @@ -197,6 +214,8 @@ static int meson_ir_remove(struct platform_device *pdev) static const struct of_device_id meson_ir_match[] = { { .compatible = "amlogic,meson6-ir" }, + { .compatible = "amlogic,meson8b-ir" }, + { .compatible = "amlogic,meson-gxbb-ir" }, { }, }; diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c index f87ad6f5d2dc..b5ed3bd082b5 100644 --- a/drivers/memory/atmel-ebi.c +++ b/drivers/memory/atmel-ebi.c @@ -410,10 +410,7 @@ static int at91sam9_ebi_init(struct at91_ebi *ebi) field.reg = AT91SAM9_SMC_MODE(AT91SAM9_SMC_GENERIC); fields->mode = devm_regmap_field_alloc(ebi->dev, ebi->smc, field); - if (IS_ERR(fields->mode)) - return PTR_ERR(fields->mode); - - return 0; + return PTR_ERR_OR_ZERO(fields->mode); } static int sama5d3_ebi_init(struct at91_ebi *ebi) @@ -441,10 +438,7 @@ static int sama5d3_ebi_init(struct at91_ebi *ebi) field.reg = SAMA5_SMC_MODE(SAMA5_SMC_GENERIC); fields->mode = devm_regmap_field_alloc(ebi->dev, ebi->smc, field); - if (IS_ERR(fields->mode)) - return PTR_ERR(fields->mode); - - return 0; + return PTR_ERR_OR_ZERO(fields->mode); } static int at91_ebi_dev_setup(struct at91_ebi *ebi, struct device_node *np, diff --git a/drivers/memory/atmel-sdramc.c b/drivers/memory/atmel-sdramc.c index 53a341f3b305..12080b05e3e6 100644 --- a/drivers/memory/atmel-sdramc.c +++ b/drivers/memory/atmel-sdramc.c @@ -53,12 +53,10 @@ static const struct of_device_id atmel_ramc_of_match[] = { static int atmel_ramc_probe(struct platform_device *pdev) { - const struct of_device_id *match; const struct at91_ramc_caps *caps; struct clk *clk; - match = of_match_device(atmel_ramc_of_match, &pdev->dev); - caps = match->data; + caps = of_device_get_match_data(&pdev->dev); if (caps->has_ddrck) { clk = devm_clk_get(&pdev->dev, "ddrck"); diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c index f00f3e742265..5457c361ad58 100644 --- a/drivers/memory/omap-gpmc.c +++ b/drivers/memory/omap-gpmc.c @@ -350,8 +350,8 @@ static unsigned int gpmc_ps_to_ticks(unsigned int time_ps) return (time_ps + tick_ps - 1) / tick_ps; } -unsigned int gpmc_clk_ticks_to_ns(unsigned ticks, int cs, - enum gpmc_clk_domain cd) +static unsigned int gpmc_clk_ticks_to_ns(unsigned int ticks, int cs, + enum gpmc_clk_domain cd) { return ticks * gpmc_get_clk_period(cs, cd) / 1000; } @@ -2143,9 +2143,7 @@ err_child_fail: ret = -ENODEV; err_cs: - if (waitpin_desc) - gpiochip_free_own_desc(waitpin_desc); - + gpiochip_free_own_desc(waitpin_desc); err: gpmc_cs_free(cs); @@ -2265,7 +2263,7 @@ static int gpmc_gpio_init(struct gpmc_device *gpmc) gpmc->gpio_chip.get = gpmc_gpio_get; gpmc->gpio_chip.base = -1; - ret = gpiochip_add(&gpmc->gpio_chip); + ret = devm_gpiochip_add_data(gpmc->dev, &gpmc->gpio_chip, NULL); if (ret < 0) { dev_err(gpmc->dev, "could not register gpio chip: %d\n", ret); return ret; @@ -2274,11 +2272,6 @@ static int gpmc_gpio_init(struct gpmc_device *gpmc) return 0; } -static void gpmc_gpio_exit(struct gpmc_device *gpmc) -{ - gpiochip_remove(&gpmc->gpio_chip); -} - static int gpmc_probe(struct platform_device *pdev) { int rc; @@ -2365,15 +2358,13 @@ static int gpmc_probe(struct platform_device *pdev) rc = gpmc_setup_irq(gpmc); if (rc) { dev_err(gpmc->dev, "gpmc_setup_irq failed\n"); - goto setup_irq_failed; + goto gpio_init_failed; } gpmc_probe_dt_children(pdev); return 0; -setup_irq_failed: - gpmc_gpio_exit(gpmc); gpio_init_failed: gpmc_mem_exit(); pm_runtime_put_sync(&pdev->dev); @@ -2387,7 +2378,6 @@ static int gpmc_remove(struct platform_device *pdev) struct gpmc_device *gpmc = platform_get_drvdata(pdev); gpmc_free_irq(gpmc); - gpmc_gpio_exit(gpmc); gpmc_mem_exit(); pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig index f550c4596a7a..ba140eaee5c8 100644 --- a/drivers/nvmem/Kconfig +++ b/drivers/nvmem/Kconfig @@ -101,4 +101,14 @@ config NVMEM_VF610_OCOTP This driver can also be build as a module. If so, the module will be called nvmem-vf610-ocotp. +config MESON_EFUSE + tristate "Amlogic eFuse Support" + depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM + help + This is a driver to retrieve specific values from the eFuse found on + the Amlogic Meson SoCs. + + This driver can also be built as a module. If so, the module + will be called nvmem_meson_efuse. + endif diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile index 45ab1ae08fa9..8f942a0cdaec 100644 --- a/drivers/nvmem/Makefile +++ b/drivers/nvmem/Makefile @@ -22,3 +22,5 @@ obj-$(CONFIG_NVMEM_SUNXI_SID) += nvmem_sunxi_sid.o nvmem_sunxi_sid-y := sunxi_sid.o obj-$(CONFIG_NVMEM_VF610_OCOTP) += nvmem-vf610-ocotp.o nvmem-vf610-ocotp-y := vf610-ocotp.o +obj-$(CONFIG_MESON_EFUSE) += nvmem_meson_efuse.o +nvmem_meson_efuse-y := meson-efuse.o diff --git a/drivers/nvmem/meson-efuse.c b/drivers/nvmem/meson-efuse.c new file mode 100644 index 000000000000..f207c3b10482 --- /dev/null +++ b/drivers/nvmem/meson-efuse.c @@ -0,0 +1,93 @@ +/* + * Amlogic eFuse Driver + * + * Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/module.h> +#include <linux/nvmem-provider.h> +#include <linux/of.h> +#include <linux/platform_device.h> + +#include <linux/firmware/meson/meson_sm.h> + +static int meson_efuse_read(void *context, unsigned int offset, + void *val, size_t bytes) +{ + u8 *buf = val; + int ret; + + ret = meson_sm_call_read(buf, SM_EFUSE_READ, offset, + bytes, 0, 0, 0); + if (ret < 0) + return ret; + + return 0; +} + +static struct nvmem_config econfig = { + .name = "meson-efuse", + .owner = THIS_MODULE, + .stride = 1, + .word_size = 1, + .read_only = true, +}; + +static const struct of_device_id meson_efuse_match[] = { + { .compatible = "amlogic,meson-gxbb-efuse", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, meson_efuse_match); + +static int meson_efuse_probe(struct platform_device *pdev) +{ + struct nvmem_device *nvmem; + unsigned int size; + + if (meson_sm_call(SM_EFUSE_USER_MAX, &size, 0, 0, 0, 0, 0) < 0) + return -EINVAL; + + econfig.dev = &pdev->dev; + econfig.reg_read = meson_efuse_read; + econfig.size = size; + + nvmem = nvmem_register(&econfig); + if (IS_ERR(nvmem)) + return PTR_ERR(nvmem); + + platform_set_drvdata(pdev, nvmem); + + return 0; +} + +static int meson_efuse_remove(struct platform_device *pdev) +{ + struct nvmem_device *nvmem = platform_get_drvdata(pdev); + + return nvmem_unregister(nvmem); +} + +static struct platform_driver meson_efuse_driver = { + .probe = meson_efuse_probe, + .remove = meson_efuse_remove, + .driver = { + .name = "meson-efuse", + .of_match_table = meson_efuse_match, + }, +}; + +module_platform_driver(meson_efuse_driver); + +MODULE_AUTHOR("Carlo Caione <carlo@endlessm.com>"); +MODULE_DESCRIPTION("Amlogic Meson NVMEM driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig index 04e2653bb8c0..4d5c5f9f0dbd 100644 --- a/drivers/perf/Kconfig +++ b/drivers/perf/Kconfig @@ -12,4 +12,11 @@ config ARM_PMU Say y if you want to use CPU performance monitors on ARM-based systems. +config XGENE_PMU + depends on PERF_EVENTS && ARCH_XGENE + bool "APM X-Gene SoC PMU" + default n + help + Say y if you want to use APM X-Gene SoC performance monitors. + endmenu diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile index acd2397ded94..b116e982810b 100644 --- a/drivers/perf/Makefile +++ b/drivers/perf/Makefile @@ -1 +1,2 @@ obj-$(CONFIG_ARM_PMU) += arm_pmu.o +obj-$(CONFIG_XGENE_PMU) += xgene_pmu.o diff --git a/drivers/perf/xgene_pmu.c b/drivers/perf/xgene_pmu.c new file mode 100644 index 000000000000..c2ac7646b99f --- /dev/null +++ b/drivers/perf/xgene_pmu.c @@ -0,0 +1,1398 @@ +/* + * APM X-Gene SoC PMU (Performance Monitor Unit) + * + * Copyright (c) 2016, Applied Micro Circuits Corporation + * Author: Hoan Tran <hotran@apm.com> + * Tai Nguyen <ttnguyen@apm.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/acpi.h> +#include <linux/clk.h> +#include <linux/cpumask.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/mfd/syscon.h> +#include <linux/of_address.h> +#include <linux/of_fdt.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/perf_event.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +#define CSW_CSWCR 0x0000 +#define CSW_CSWCR_DUALMCB_MASK BIT(0) +#define MCBADDRMR 0x0000 +#define MCBADDRMR_DUALMCU_MODE_MASK BIT(2) + +#define PCPPMU_INTSTATUS_REG 0x000 +#define PCPPMU_INTMASK_REG 0x004 +#define PCPPMU_INTMASK 0x0000000F +#define PCPPMU_INTENMASK 0xFFFFFFFF +#define PCPPMU_INTCLRMASK 0xFFFFFFF0 +#define PCPPMU_INT_MCU BIT(0) +#define PCPPMU_INT_MCB BIT(1) +#define PCPPMU_INT_L3C BIT(2) +#define PCPPMU_INT_IOB BIT(3) + +#define PMU_MAX_COUNTERS 4 +#define PMU_CNT_MAX_PERIOD 0x100000000ULL +#define PMU_OVERFLOW_MASK 0xF +#define PMU_PMCR_E BIT(0) +#define PMU_PMCR_P BIT(1) + +#define PMU_PMEVCNTR0 0x000 +#define PMU_PMEVCNTR1 0x004 +#define PMU_PMEVCNTR2 0x008 +#define PMU_PMEVCNTR3 0x00C +#define PMU_PMEVTYPER0 0x400 +#define PMU_PMEVTYPER1 0x404 +#define PMU_PMEVTYPER2 0x408 +#define PMU_PMEVTYPER3 0x40C +#define PMU_PMAMR0 0xA00 +#define PMU_PMAMR1 0xA04 +#define PMU_PMCNTENSET 0xC00 +#define PMU_PMCNTENCLR 0xC20 +#define PMU_PMINTENSET 0xC40 +#define PMU_PMINTENCLR 0xC60 +#define PMU_PMOVSR 0xC80 +#define PMU_PMCR 0xE04 + +#define to_pmu_dev(p) container_of(p, struct xgene_pmu_dev, pmu) +#define GET_CNTR(ev) (ev->hw.idx) +#define GET_EVENTID(ev) (ev->hw.config & 0xFFULL) +#define GET_AGENTID(ev) (ev->hw.config_base & 0xFFFFFFFFUL) +#define GET_AGENT1ID(ev) ((ev->hw.config_base >> 32) & 0xFFFFFFFFUL) + +struct hw_pmu_info { + u32 type; + u32 enable_mask; + void __iomem *csr; +}; + +struct xgene_pmu_dev { + struct hw_pmu_info *inf; + struct xgene_pmu *parent; + struct pmu pmu; + u8 max_counters; + DECLARE_BITMAP(cntr_assign_mask, PMU_MAX_COUNTERS); + u64 max_period; + const struct attribute_group **attr_groups; + struct perf_event *pmu_counter_event[PMU_MAX_COUNTERS]; +}; + +struct xgene_pmu { + struct device *dev; + int version; + void __iomem *pcppmu_csr; + u32 mcb_active_mask; + u32 mc_active_mask; + cpumask_t cpu; + raw_spinlock_t lock; + struct list_head l3cpmus; + struct list_head iobpmus; + struct list_head mcbpmus; + struct list_head mcpmus; +}; + +struct xgene_pmu_dev_ctx { + char *name; + struct list_head next; + struct xgene_pmu_dev *pmu_dev; + struct hw_pmu_info inf; +}; + +struct xgene_pmu_data { + int id; + u32 data; +}; + +enum xgene_pmu_version { + PCP_PMU_V1 = 1, + PCP_PMU_V2, +}; + +enum xgene_pmu_dev_type { + PMU_TYPE_L3C = 0, + PMU_TYPE_IOB, + PMU_TYPE_MCB, + PMU_TYPE_MC, +}; + +/* + * sysfs format attributes + */ +static ssize_t xgene_pmu_format_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct dev_ext_attribute *eattr; + + eattr = container_of(attr, struct dev_ext_attribute, attr); + return sprintf(buf, "%s\n", (char *) eattr->var); +} + +#define XGENE_PMU_FORMAT_ATTR(_name, _config) \ + (&((struct dev_ext_attribute[]) { \ + { .attr = __ATTR(_name, S_IRUGO, xgene_pmu_format_show, NULL), \ + .var = (void *) _config, } \ + })[0].attr.attr) + +static struct attribute *l3c_pmu_format_attrs[] = { + XGENE_PMU_FORMAT_ATTR(l3c_eventid, "config:0-7"), + XGENE_PMU_FORMAT_ATTR(l3c_agentid, "config1:0-9"), + NULL, +}; + +static struct attribute *iob_pmu_format_attrs[] = { + XGENE_PMU_FORMAT_ATTR(iob_eventid, "config:0-7"), + XGENE_PMU_FORMAT_ATTR(iob_agentid, "config1:0-63"), + NULL, +}; + +static struct attribute *mcb_pmu_format_attrs[] = { + XGENE_PMU_FORMAT_ATTR(mcb_eventid, "config:0-5"), + XGENE_PMU_FORMAT_ATTR(mcb_agentid, "config1:0-9"), + NULL, +}; + +static struct attribute *mc_pmu_format_attrs[] = { + XGENE_PMU_FORMAT_ATTR(mc_eventid, "config:0-28"), + NULL, +}; + +static const struct attribute_group l3c_pmu_format_attr_group = { + .name = "format", + .attrs = l3c_pmu_format_attrs, +}; + +static const struct attribute_group iob_pmu_format_attr_group = { + .name = "format", + .attrs = iob_pmu_format_attrs, +}; + +static const struct attribute_group mcb_pmu_format_attr_group = { + .name = "format", + .attrs = mcb_pmu_format_attrs, +}; + +static const struct attribute_group mc_pmu_format_attr_group = { + .name = "format", + .attrs = mc_pmu_format_attrs, +}; + +/* + * sysfs event attributes + */ +static ssize_t xgene_pmu_event_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct dev_ext_attribute *eattr; + + eattr = container_of(attr, struct dev_ext_attribute, attr); + return sprintf(buf, "config=0x%lx\n", (unsigned long) eattr->var); +} + +#define XGENE_PMU_EVENT_ATTR(_name, _config) \ + (&((struct dev_ext_attribute[]) { \ + { .attr = __ATTR(_name, S_IRUGO, xgene_pmu_event_show, NULL), \ + .var = (void *) _config, } \ + })[0].attr.attr) + +static struct attribute *l3c_pmu_events_attrs[] = { + XGENE_PMU_EVENT_ATTR(cycle-count, 0x00), + XGENE_PMU_EVENT_ATTR(cycle-count-div-64, 0x01), + XGENE_PMU_EVENT_ATTR(read-hit, 0x02), + XGENE_PMU_EVENT_ATTR(read-miss, 0x03), + XGENE_PMU_EVENT_ATTR(write-need-replacement, 0x06), + XGENE_PMU_EVENT_ATTR(write-not-need-replacement, 0x07), + XGENE_PMU_EVENT_ATTR(tq-full, 0x08), + XGENE_PMU_EVENT_ATTR(ackq-full, 0x09), + XGENE_PMU_EVENT_ATTR(wdb-full, 0x0a), + XGENE_PMU_EVENT_ATTR(bank-fifo-full, 0x0b), + XGENE_PMU_EVENT_ATTR(odb-full, 0x0c), + XGENE_PMU_EVENT_ATTR(wbq-full, 0x0d), + XGENE_PMU_EVENT_ATTR(bank-conflict-fifo-issue, 0x0e), + XGENE_PMU_EVENT_ATTR(bank-fifo-issue, 0x0f), + NULL, +}; + +static struct attribute *iob_pmu_events_attrs[] = { + XGENE_PMU_EVENT_ATTR(cycle-count, 0x00), + XGENE_PMU_EVENT_ATTR(cycle-count-div-64, 0x01), + XGENE_PMU_EVENT_ATTR(axi0-read, 0x02), + XGENE_PMU_EVENT_ATTR(axi0-read-partial, 0x03), + XGENE_PMU_EVENT_ATTR(axi1-read, 0x04), + XGENE_PMU_EVENT_ATTR(axi1-read-partial, 0x05), + XGENE_PMU_EVENT_ATTR(csw-read-block, 0x06), + XGENE_PMU_EVENT_ATTR(csw-read-partial, 0x07), + XGENE_PMU_EVENT_ATTR(axi0-write, 0x10), + XGENE_PMU_EVENT_ATTR(axi0-write-partial, 0x11), + XGENE_PMU_EVENT_ATTR(axi1-write, 0x13), + XGENE_PMU_EVENT_ATTR(axi1-write-partial, 0x14), + XGENE_PMU_EVENT_ATTR(csw-inbound-dirty, 0x16), + NULL, +}; + +static struct attribute *mcb_pmu_events_attrs[] = { + XGENE_PMU_EVENT_ATTR(cycle-count, 0x00), + XGENE_PMU_EVENT_ATTR(cycle-count-div-64, 0x01), + XGENE_PMU_EVENT_ATTR(csw-read, 0x02), + XGENE_PMU_EVENT_ATTR(csw-write-request, 0x03), + XGENE_PMU_EVENT_ATTR(mcb-csw-stall, 0x04), + XGENE_PMU_EVENT_ATTR(cancel-read-gack, 0x05), + NULL, +}; + +static struct attribute *mc_pmu_events_attrs[] = { + XGENE_PMU_EVENT_ATTR(cycle-count, 0x00), + XGENE_PMU_EVENT_ATTR(cycle-count-div-64, 0x01), + XGENE_PMU_EVENT_ATTR(act-cmd-sent, 0x02), + XGENE_PMU_EVENT_ATTR(pre-cmd-sent, 0x03), + XGENE_PMU_EVENT_ATTR(rd-cmd-sent, 0x04), + XGENE_PMU_EVENT_ATTR(rda-cmd-sent, 0x05), + XGENE_PMU_EVENT_ATTR(wr-cmd-sent, 0x06), + XGENE_PMU_EVENT_ATTR(wra-cmd-sent, 0x07), + XGENE_PMU_EVENT_ATTR(pde-cmd-sent, 0x08), + XGENE_PMU_EVENT_ATTR(sre-cmd-sent, 0x09), + XGENE_PMU_EVENT_ATTR(prea-cmd-sent, 0x0a), + XGENE_PMU_EVENT_ATTR(ref-cmd-sent, 0x0b), + XGENE_PMU_EVENT_ATTR(rd-rda-cmd-sent, 0x0c), + XGENE_PMU_EVENT_ATTR(wr-wra-cmd-sent, 0x0d), + XGENE_PMU_EVENT_ATTR(in-rd-collision, 0x0e), + XGENE_PMU_EVENT_ATTR(in-wr-collision, 0x0f), + XGENE_PMU_EVENT_ATTR(collision-queue-not-empty, 0x10), + XGENE_PMU_EVENT_ATTR(collision-queue-full, 0x11), + XGENE_PMU_EVENT_ATTR(mcu-request, 0x12), + XGENE_PMU_EVENT_ATTR(mcu-rd-request, 0x13), + XGENE_PMU_EVENT_ATTR(mcu-hp-rd-request, 0x14), + XGENE_PMU_EVENT_ATTR(mcu-wr-request, 0x15), + XGENE_PMU_EVENT_ATTR(mcu-rd-proceed-all, 0x16), + XGENE_PMU_EVENT_ATTR(mcu-rd-proceed-cancel, 0x17), + XGENE_PMU_EVENT_ATTR(mcu-rd-response, 0x18), + XGENE_PMU_EVENT_ATTR(mcu-rd-proceed-speculative-all, 0x19), + XGENE_PMU_EVENT_ATTR(mcu-rd-proceed-speculative-cancel, 0x1a), + XGENE_PMU_EVENT_ATTR(mcu-wr-proceed-all, 0x1b), + XGENE_PMU_EVENT_ATTR(mcu-wr-proceed-cancel, 0x1c), + NULL, +}; + +static const struct attribute_group l3c_pmu_events_attr_group = { + .name = "events", + .attrs = l3c_pmu_events_attrs, +}; + +static const struct attribute_group iob_pmu_events_attr_group = { + .name = "events", + .attrs = iob_pmu_events_attrs, +}; + +static const struct attribute_group mcb_pmu_events_attr_group = { + .name = "events", + .attrs = mcb_pmu_events_attrs, +}; + +static const struct attribute_group mc_pmu_events_attr_group = { + .name = "events", + .attrs = mc_pmu_events_attrs, +}; + +/* + * sysfs cpumask attributes + */ +static ssize_t xgene_pmu_cpumask_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct xgene_pmu_dev *pmu_dev = to_pmu_dev(dev_get_drvdata(dev)); + + return cpumap_print_to_pagebuf(true, buf, &pmu_dev->parent->cpu); +} + +static DEVICE_ATTR(cpumask, S_IRUGO, xgene_pmu_cpumask_show, NULL); + +static struct attribute *xgene_pmu_cpumask_attrs[] = { + &dev_attr_cpumask.attr, + NULL, +}; + +static const struct attribute_group pmu_cpumask_attr_group = { + .attrs = xgene_pmu_cpumask_attrs, +}; + +/* + * Per PMU device attribute groups + */ +static const struct attribute_group *l3c_pmu_attr_groups[] = { + &l3c_pmu_format_attr_group, + &pmu_cpumask_attr_group, + &l3c_pmu_events_attr_group, + NULL +}; + +static const struct attribute_group *iob_pmu_attr_groups[] = { + &iob_pmu_format_attr_group, + &pmu_cpumask_attr_group, + &iob_pmu_events_attr_group, + NULL +}; + +static const struct attribute_group *mcb_pmu_attr_groups[] = { + &mcb_pmu_format_attr_group, + &pmu_cpumask_attr_group, + &mcb_pmu_events_attr_group, + NULL +}; + +static const struct attribute_group *mc_pmu_attr_groups[] = { + &mc_pmu_format_attr_group, + &pmu_cpumask_attr_group, + &mc_pmu_events_attr_group, + NULL +}; + +static int get_next_avail_cntr(struct xgene_pmu_dev *pmu_dev) +{ + int cntr; + + cntr = find_first_zero_bit(pmu_dev->cntr_assign_mask, + pmu_dev->max_counters); + if (cntr == pmu_dev->max_counters) + return -ENOSPC; + set_bit(cntr, pmu_dev->cntr_assign_mask); + + return cntr; +} + +static void clear_avail_cntr(struct xgene_pmu_dev *pmu_dev, int cntr) +{ + clear_bit(cntr, pmu_dev->cntr_assign_mask); +} + +static inline void xgene_pmu_mask_int(struct xgene_pmu *xgene_pmu) +{ + writel(PCPPMU_INTENMASK, xgene_pmu->pcppmu_csr + PCPPMU_INTMASK_REG); +} + +static inline void xgene_pmu_unmask_int(struct xgene_pmu *xgene_pmu) +{ + writel(PCPPMU_INTCLRMASK, xgene_pmu->pcppmu_csr + PCPPMU_INTMASK_REG); +} + +static inline u32 xgene_pmu_read_counter(struct xgene_pmu_dev *pmu_dev, int idx) +{ + return readl(pmu_dev->inf->csr + PMU_PMEVCNTR0 + (4 * idx)); +} + +static inline void +xgene_pmu_write_counter(struct xgene_pmu_dev *pmu_dev, int idx, u32 val) +{ + writel(val, pmu_dev->inf->csr + PMU_PMEVCNTR0 + (4 * idx)); +} + +static inline void +xgene_pmu_write_evttype(struct xgene_pmu_dev *pmu_dev, int idx, u32 val) +{ + writel(val, pmu_dev->inf->csr + PMU_PMEVTYPER0 + (4 * idx)); +} + +static inline void +xgene_pmu_write_agentmsk(struct xgene_pmu_dev *pmu_dev, u32 val) +{ + writel(val, pmu_dev->inf->csr + PMU_PMAMR0); +} + +static inline void +xgene_pmu_write_agent1msk(struct xgene_pmu_dev *pmu_dev, u32 val) +{ + writel(val, pmu_dev->inf->csr + PMU_PMAMR1); +} + +static inline void +xgene_pmu_enable_counter(struct xgene_pmu_dev *pmu_dev, int idx) +{ + u32 val; + + val = readl(pmu_dev->inf->csr + PMU_PMCNTENSET); + val |= 1 << idx; + writel(val, pmu_dev->inf->csr + PMU_PMCNTENSET); +} + +static inline void +xgene_pmu_disable_counter(struct xgene_pmu_dev *pmu_dev, int idx) +{ + u32 val; + + val = readl(pmu_dev->inf->csr + PMU_PMCNTENCLR); + val |= 1 << idx; + writel(val, pmu_dev->inf->csr + PMU_PMCNTENCLR); +} + +static inline void +xgene_pmu_enable_counter_int(struct xgene_pmu_dev *pmu_dev, int idx) +{ + u32 val; + + val = readl(pmu_dev->inf->csr + PMU_PMINTENSET); + val |= 1 << idx; + writel(val, pmu_dev->inf->csr + PMU_PMINTENSET); +} + +static inline void +xgene_pmu_disable_counter_int(struct xgene_pmu_dev *pmu_dev, int idx) +{ + u32 val; + + val = readl(pmu_dev->inf->csr + PMU_PMINTENCLR); + val |= 1 << idx; + writel(val, pmu_dev->inf->csr + PMU_PMINTENCLR); +} + +static inline void xgene_pmu_reset_counters(struct xgene_pmu_dev *pmu_dev) +{ + u32 val; + + val = readl(pmu_dev->inf->csr + PMU_PMCR); + val |= PMU_PMCR_P; + writel(val, pmu_dev->inf->csr + PMU_PMCR); +} + +static inline void xgene_pmu_start_counters(struct xgene_pmu_dev *pmu_dev) +{ + u32 val; + + val = readl(pmu_dev->inf->csr + PMU_PMCR); + val |= PMU_PMCR_E; + writel(val, pmu_dev->inf->csr + PMU_PMCR); +} + +static inline void xgene_pmu_stop_counters(struct xgene_pmu_dev *pmu_dev) +{ + u32 val; + + val = readl(pmu_dev->inf->csr + PMU_PMCR); + val &= ~PMU_PMCR_E; + writel(val, pmu_dev->inf->csr + PMU_PMCR); +} + +static void xgene_perf_pmu_enable(struct pmu *pmu) +{ + struct xgene_pmu_dev *pmu_dev = to_pmu_dev(pmu); + int enabled = bitmap_weight(pmu_dev->cntr_assign_mask, + pmu_dev->max_counters); + + if (!enabled) + return; + + xgene_pmu_start_counters(pmu_dev); +} + +static void xgene_perf_pmu_disable(struct pmu *pmu) +{ + struct xgene_pmu_dev *pmu_dev = to_pmu_dev(pmu); + + xgene_pmu_stop_counters(pmu_dev); +} + +static int xgene_perf_event_init(struct perf_event *event) +{ + struct xgene_pmu_dev *pmu_dev = to_pmu_dev(event->pmu); + struct hw_perf_event *hw = &event->hw; + struct perf_event *sibling; + + /* Test the event attr type check for PMU enumeration */ + if (event->attr.type != event->pmu->type) + return -ENOENT; + + /* + * SOC PMU counters are shared across all cores. + * Therefore, it does not support per-process mode. + * Also, it does not support event sampling mode. + */ + if (is_sampling_event(event) || event->attach_state & PERF_ATTACH_TASK) + return -EINVAL; + + /* SOC counters do not have usr/os/guest/host bits */ + if (event->attr.exclude_user || event->attr.exclude_kernel || + event->attr.exclude_host || event->attr.exclude_guest) + return -EINVAL; + + if (event->cpu < 0) + return -EINVAL; + /* + * Many perf core operations (eg. events rotation) operate on a + * single CPU context. This is obvious for CPU PMUs, where one + * expects the same sets of events being observed on all CPUs, + * but can lead to issues for off-core PMUs, where each + * event could be theoretically assigned to a different CPU. To + * mitigate this, we enforce CPU assignment to one, selected + * processor (the one described in the "cpumask" attribute). + */ + event->cpu = cpumask_first(&pmu_dev->parent->cpu); + + hw->config = event->attr.config; + /* + * Each bit of the config1 field represents an agent from which the + * request of the event come. The event is counted only if it's caused + * by a request of an agent has the bit cleared. + * By default, the event is counted for all agents. + */ + hw->config_base = event->attr.config1; + + /* + * We must NOT create groups containing mixed PMUs, although software + * events are acceptable + */ + if (event->group_leader->pmu != event->pmu && + !is_software_event(event->group_leader)) + return -EINVAL; + + list_for_each_entry(sibling, &event->group_leader->sibling_list, + group_entry) + if (sibling->pmu != event->pmu && + !is_software_event(sibling)) + return -EINVAL; + + return 0; +} + +static void xgene_perf_enable_event(struct perf_event *event) +{ + struct xgene_pmu_dev *pmu_dev = to_pmu_dev(event->pmu); + + xgene_pmu_write_evttype(pmu_dev, GET_CNTR(event), GET_EVENTID(event)); + xgene_pmu_write_agentmsk(pmu_dev, ~((u32)GET_AGENTID(event))); + if (pmu_dev->inf->type == PMU_TYPE_IOB) + xgene_pmu_write_agent1msk(pmu_dev, ~((u32)GET_AGENT1ID(event))); + + xgene_pmu_enable_counter(pmu_dev, GET_CNTR(event)); + xgene_pmu_enable_counter_int(pmu_dev, GET_CNTR(event)); +} + +static void xgene_perf_disable_event(struct perf_event *event) +{ + struct xgene_pmu_dev *pmu_dev = to_pmu_dev(event->pmu); + + xgene_pmu_disable_counter(pmu_dev, GET_CNTR(event)); + xgene_pmu_disable_counter_int(pmu_dev, GET_CNTR(event)); +} + +static void xgene_perf_event_set_period(struct perf_event *event) +{ + struct xgene_pmu_dev *pmu_dev = to_pmu_dev(event->pmu); + struct hw_perf_event *hw = &event->hw; + /* + * The X-Gene PMU counters have a period of 2^32. To account for the + * possiblity of extreme interrupt latency we program for a period of + * half that. Hopefully we can handle the interrupt before another 2^31 + * events occur and the counter overtakes its previous value. + */ + u64 val = 1ULL << 31; + + local64_set(&hw->prev_count, val); + xgene_pmu_write_counter(pmu_dev, hw->idx, (u32) val); +} + +static void xgene_perf_event_update(struct perf_event *event) +{ + struct xgene_pmu_dev *pmu_dev = to_pmu_dev(event->pmu); + struct hw_perf_event *hw = &event->hw; + u64 delta, prev_raw_count, new_raw_count; + +again: + prev_raw_count = local64_read(&hw->prev_count); + new_raw_count = xgene_pmu_read_counter(pmu_dev, GET_CNTR(event)); + + if (local64_cmpxchg(&hw->prev_count, prev_raw_count, + new_raw_count) != prev_raw_count) + goto again; + + delta = (new_raw_count - prev_raw_count) & pmu_dev->max_period; + + local64_add(delta, &event->count); +} + +static void xgene_perf_read(struct perf_event *event) +{ + xgene_perf_event_update(event); +} + +static void xgene_perf_start(struct perf_event *event, int flags) +{ + struct xgene_pmu_dev *pmu_dev = to_pmu_dev(event->pmu); + struct hw_perf_event *hw = &event->hw; + + if (WARN_ON_ONCE(!(hw->state & PERF_HES_STOPPED))) + return; + + WARN_ON_ONCE(!(hw->state & PERF_HES_UPTODATE)); + hw->state = 0; + + xgene_perf_event_set_period(event); + + if (flags & PERF_EF_RELOAD) { + u64 prev_raw_count = local64_read(&hw->prev_count); + + xgene_pmu_write_counter(pmu_dev, GET_CNTR(event), + (u32) prev_raw_count); + } + + xgene_perf_enable_event(event); + perf_event_update_userpage(event); +} + +static void xgene_perf_stop(struct perf_event *event, int flags) +{ + struct hw_perf_event *hw = &event->hw; + u64 config; + + if (hw->state & PERF_HES_UPTODATE) + return; + + xgene_perf_disable_event(event); + WARN_ON_ONCE(hw->state & PERF_HES_STOPPED); + hw->state |= PERF_HES_STOPPED; + + if (hw->state & PERF_HES_UPTODATE) + return; + + config = hw->config; + xgene_perf_read(event); + hw->state |= PERF_HES_UPTODATE; +} + +static int xgene_perf_add(struct perf_event *event, int flags) +{ + struct xgene_pmu_dev *pmu_dev = to_pmu_dev(event->pmu); + struct hw_perf_event *hw = &event->hw; + + hw->state = PERF_HES_UPTODATE | PERF_HES_STOPPED; + + /* Allocate an event counter */ + hw->idx = get_next_avail_cntr(pmu_dev); + if (hw->idx < 0) + return -EAGAIN; + + /* Update counter event pointer for Interrupt handler */ + pmu_dev->pmu_counter_event[hw->idx] = event; + + if (flags & PERF_EF_START) + xgene_perf_start(event, PERF_EF_RELOAD); + + return 0; +} + +static void xgene_perf_del(struct perf_event *event, int flags) +{ + struct xgene_pmu_dev *pmu_dev = to_pmu_dev(event->pmu); + struct hw_perf_event *hw = &event->hw; + + xgene_perf_stop(event, PERF_EF_UPDATE); + + /* clear the assigned counter */ + clear_avail_cntr(pmu_dev, GET_CNTR(event)); + + perf_event_update_userpage(event); + pmu_dev->pmu_counter_event[hw->idx] = NULL; +} + +static int xgene_init_perf(struct xgene_pmu_dev *pmu_dev, char *name) +{ + struct xgene_pmu *xgene_pmu; + + pmu_dev->max_period = PMU_CNT_MAX_PERIOD - 1; + /* First version PMU supports only single event counter */ + xgene_pmu = pmu_dev->parent; + if (xgene_pmu->version == PCP_PMU_V1) + pmu_dev->max_counters = 1; + else + pmu_dev->max_counters = PMU_MAX_COUNTERS; + + /* Perf driver registration */ + pmu_dev->pmu = (struct pmu) { + .attr_groups = pmu_dev->attr_groups, + .task_ctx_nr = perf_invalid_context, + .pmu_enable = xgene_perf_pmu_enable, + .pmu_disable = xgene_perf_pmu_disable, + .event_init = xgene_perf_event_init, + .add = xgene_perf_add, + .del = xgene_perf_del, + .start = xgene_perf_start, + .stop = xgene_perf_stop, + .read = xgene_perf_read, + }; + + /* Hardware counter init */ + xgene_pmu_stop_counters(pmu_dev); + xgene_pmu_reset_counters(pmu_dev); + + return perf_pmu_register(&pmu_dev->pmu, name, -1); +} + +static int +xgene_pmu_dev_add(struct xgene_pmu *xgene_pmu, struct xgene_pmu_dev_ctx *ctx) +{ + struct device *dev = xgene_pmu->dev; + struct xgene_pmu_dev *pmu; + int rc; + + pmu = devm_kzalloc(dev, sizeof(*pmu), GFP_KERNEL); + if (!pmu) + return -ENOMEM; + pmu->parent = xgene_pmu; + pmu->inf = &ctx->inf; + ctx->pmu_dev = pmu; + + switch (pmu->inf->type) { + case PMU_TYPE_L3C: + pmu->attr_groups = l3c_pmu_attr_groups; + break; + case PMU_TYPE_IOB: + pmu->attr_groups = iob_pmu_attr_groups; + break; + case PMU_TYPE_MCB: + if (!(xgene_pmu->mcb_active_mask & pmu->inf->enable_mask)) + goto dev_err; + pmu->attr_groups = mcb_pmu_attr_groups; + break; + case PMU_TYPE_MC: + if (!(xgene_pmu->mc_active_mask & pmu->inf->enable_mask)) + goto dev_err; + pmu->attr_groups = mc_pmu_attr_groups; + break; + default: + return -EINVAL; + } + + rc = xgene_init_perf(pmu, ctx->name); + if (rc) { + dev_err(dev, "%s PMU: Failed to init perf driver\n", ctx->name); + goto dev_err; + } + + dev_info(dev, "%s PMU registered\n", ctx->name); + + return rc; + +dev_err: + devm_kfree(dev, pmu); + return -ENODEV; +} + +static void _xgene_pmu_isr(int irq, struct xgene_pmu_dev *pmu_dev) +{ + struct xgene_pmu *xgene_pmu = pmu_dev->parent; + u32 pmovsr; + int idx; + + pmovsr = readl(pmu_dev->inf->csr + PMU_PMOVSR) & PMU_OVERFLOW_MASK; + if (!pmovsr) + return; + + /* Clear interrupt flag */ + if (xgene_pmu->version == PCP_PMU_V1) + writel(0x0, pmu_dev->inf->csr + PMU_PMOVSR); + else + writel(pmovsr, pmu_dev->inf->csr + PMU_PMOVSR); + + for (idx = 0; idx < PMU_MAX_COUNTERS; idx++) { + struct perf_event *event = pmu_dev->pmu_counter_event[idx]; + int overflowed = pmovsr & BIT(idx); + + /* Ignore if we don't have an event. */ + if (!event || !overflowed) + continue; + xgene_perf_event_update(event); + xgene_perf_event_set_period(event); + } +} + +static irqreturn_t xgene_pmu_isr(int irq, void *dev_id) +{ + struct xgene_pmu_dev_ctx *ctx; + struct xgene_pmu *xgene_pmu = dev_id; + unsigned long flags; + u32 val; + + raw_spin_lock_irqsave(&xgene_pmu->lock, flags); + + /* Get Interrupt PMU source */ + val = readl(xgene_pmu->pcppmu_csr + PCPPMU_INTSTATUS_REG); + if (val & PCPPMU_INT_MCU) { + list_for_each_entry(ctx, &xgene_pmu->mcpmus, next) { + _xgene_pmu_isr(irq, ctx->pmu_dev); + } + } + if (val & PCPPMU_INT_MCB) { + list_for_each_entry(ctx, &xgene_pmu->mcbpmus, next) { + _xgene_pmu_isr(irq, ctx->pmu_dev); + } + } + if (val & PCPPMU_INT_L3C) { + list_for_each_entry(ctx, &xgene_pmu->l3cpmus, next) { + _xgene_pmu_isr(irq, ctx->pmu_dev); + } + } + if (val & PCPPMU_INT_IOB) { + list_for_each_entry(ctx, &xgene_pmu->iobpmus, next) { + _xgene_pmu_isr(irq, ctx->pmu_dev); + } + } + + raw_spin_unlock_irqrestore(&xgene_pmu->lock, flags); + + return IRQ_HANDLED; +} + +static int acpi_pmu_probe_active_mcb_mcu(struct xgene_pmu *xgene_pmu, + struct platform_device *pdev) +{ + void __iomem *csw_csr, *mcba_csr, *mcbb_csr; + struct resource *res; + unsigned int reg; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + csw_csr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(csw_csr)) { + dev_err(&pdev->dev, "ioremap failed for CSW CSR resource\n"); + return PTR_ERR(csw_csr); + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 2); + mcba_csr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(mcba_csr)) { + dev_err(&pdev->dev, "ioremap failed for MCBA CSR resource\n"); + return PTR_ERR(mcba_csr); + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 3); + mcbb_csr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(mcbb_csr)) { + dev_err(&pdev->dev, "ioremap failed for MCBB CSR resource\n"); + return PTR_ERR(mcbb_csr); + } + + reg = readl(csw_csr + CSW_CSWCR); + if (reg & CSW_CSWCR_DUALMCB_MASK) { + /* Dual MCB active */ + xgene_pmu->mcb_active_mask = 0x3; + /* Probe all active MC(s) */ + reg = readl(mcbb_csr + CSW_CSWCR); + xgene_pmu->mc_active_mask = + (reg & MCBADDRMR_DUALMCU_MODE_MASK) ? 0xF : 0x5; + } else { + /* Single MCB active */ + xgene_pmu->mcb_active_mask = 0x1; + /* Probe all active MC(s) */ + reg = readl(mcba_csr + CSW_CSWCR); + xgene_pmu->mc_active_mask = + (reg & MCBADDRMR_DUALMCU_MODE_MASK) ? 0x3 : 0x1; + } + + return 0; +} + +static int fdt_pmu_probe_active_mcb_mcu(struct xgene_pmu *xgene_pmu, + struct platform_device *pdev) +{ + struct regmap *csw_map, *mcba_map, *mcbb_map; + struct device_node *np = pdev->dev.of_node; + unsigned int reg; + + csw_map = syscon_regmap_lookup_by_phandle(np, "regmap-csw"); + if (IS_ERR(csw_map)) { + dev_err(&pdev->dev, "unable to get syscon regmap csw\n"); + return PTR_ERR(csw_map); + } + + mcba_map = syscon_regmap_lookup_by_phandle(np, "regmap-mcba"); + if (IS_ERR(mcba_map)) { + dev_err(&pdev->dev, "unable to get syscon regmap mcba\n"); + return PTR_ERR(mcba_map); + } + + mcbb_map = syscon_regmap_lookup_by_phandle(np, "regmap-mcbb"); + if (IS_ERR(mcbb_map)) { + dev_err(&pdev->dev, "unable to get syscon regmap mcbb\n"); + return PTR_ERR(mcbb_map); + } + + if (regmap_read(csw_map, CSW_CSWCR, ®)) + return -EINVAL; + + if (reg & CSW_CSWCR_DUALMCB_MASK) { + /* Dual MCB active */ + xgene_pmu->mcb_active_mask = 0x3; + /* Probe all active MC(s) */ + if (regmap_read(mcbb_map, MCBADDRMR, ®)) + return 0; + xgene_pmu->mc_active_mask = + (reg & MCBADDRMR_DUALMCU_MODE_MASK) ? 0xF : 0x5; + } else { + /* Single MCB active */ + xgene_pmu->mcb_active_mask = 0x1; + /* Probe all active MC(s) */ + if (regmap_read(mcba_map, MCBADDRMR, ®)) + return 0; + xgene_pmu->mc_active_mask = + (reg & MCBADDRMR_DUALMCU_MODE_MASK) ? 0x3 : 0x1; + } + + return 0; +} + +static int xgene_pmu_probe_active_mcb_mcu(struct xgene_pmu *xgene_pmu, + struct platform_device *pdev) +{ + if (has_acpi_companion(&pdev->dev)) + return acpi_pmu_probe_active_mcb_mcu(xgene_pmu, pdev); + return fdt_pmu_probe_active_mcb_mcu(xgene_pmu, pdev); +} + +static char *xgene_pmu_dev_name(struct device *dev, u32 type, int id) +{ + switch (type) { + case PMU_TYPE_L3C: + return devm_kasprintf(dev, GFP_KERNEL, "l3c%d", id); + case PMU_TYPE_IOB: + return devm_kasprintf(dev, GFP_KERNEL, "iob%d", id); + case PMU_TYPE_MCB: + return devm_kasprintf(dev, GFP_KERNEL, "mcb%d", id); + case PMU_TYPE_MC: + return devm_kasprintf(dev, GFP_KERNEL, "mc%d", id); + default: + return devm_kasprintf(dev, GFP_KERNEL, "unknown"); + } +} + +#if defined(CONFIG_ACPI) +static int acpi_pmu_dev_add_resource(struct acpi_resource *ares, void *data) +{ + struct resource *res = data; + + if (ares->type == ACPI_RESOURCE_TYPE_FIXED_MEMORY32) + acpi_dev_resource_memory(ares, res); + + /* Always tell the ACPI core to skip this resource */ + return 1; +} + +static struct +xgene_pmu_dev_ctx *acpi_get_pmu_hw_inf(struct xgene_pmu *xgene_pmu, + struct acpi_device *adev, u32 type) +{ + struct device *dev = xgene_pmu->dev; + struct list_head resource_list; + struct xgene_pmu_dev_ctx *ctx; + const union acpi_object *obj; + struct hw_pmu_info *inf; + void __iomem *dev_csr; + struct resource res; + int enable_bit; + int rc; + + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return NULL; + + INIT_LIST_HEAD(&resource_list); + rc = acpi_dev_get_resources(adev, &resource_list, + acpi_pmu_dev_add_resource, &res); + acpi_dev_free_resource_list(&resource_list); + if (rc < 0 || IS_ERR(&res)) { + dev_err(dev, "PMU type %d: No resource address found\n", type); + goto err; + } + + dev_csr = devm_ioremap_resource(dev, &res); + if (IS_ERR(dev_csr)) { + dev_err(dev, "PMU type %d: Fail to map resource\n", type); + goto err; + } + + /* A PMU device node without enable-bit-index is always enabled */ + rc = acpi_dev_get_property(adev, "enable-bit-index", + ACPI_TYPE_INTEGER, &obj); + if (rc < 0) + enable_bit = 0; + else + enable_bit = (int) obj->integer.value; + + ctx->name = xgene_pmu_dev_name(dev, type, enable_bit); + if (!ctx->name) { + dev_err(dev, "PMU type %d: Fail to get device name\n", type); + goto err; + } + inf = &ctx->inf; + inf->type = type; + inf->csr = dev_csr; + inf->enable_mask = 1 << enable_bit; + + return ctx; +err: + devm_kfree(dev, ctx); + return NULL; +} + +static acpi_status acpi_pmu_dev_add(acpi_handle handle, u32 level, + void *data, void **return_value) +{ + struct xgene_pmu *xgene_pmu = data; + struct xgene_pmu_dev_ctx *ctx; + struct acpi_device *adev; + + if (acpi_bus_get_device(handle, &adev)) + return AE_OK; + if (acpi_bus_get_status(adev) || !adev->status.present) + return AE_OK; + + if (!strcmp(acpi_device_hid(adev), "APMC0D5D")) + ctx = acpi_get_pmu_hw_inf(xgene_pmu, adev, PMU_TYPE_L3C); + else if (!strcmp(acpi_device_hid(adev), "APMC0D5E")) + ctx = acpi_get_pmu_hw_inf(xgene_pmu, adev, PMU_TYPE_IOB); + else if (!strcmp(acpi_device_hid(adev), "APMC0D5F")) + ctx = acpi_get_pmu_hw_inf(xgene_pmu, adev, PMU_TYPE_MCB); + else if (!strcmp(acpi_device_hid(adev), "APMC0D60")) + ctx = acpi_get_pmu_hw_inf(xgene_pmu, adev, PMU_TYPE_MC); + else + ctx = NULL; + + if (!ctx) + return AE_OK; + + if (xgene_pmu_dev_add(xgene_pmu, ctx)) { + /* Can't add the PMU device, skip it */ + devm_kfree(xgene_pmu->dev, ctx); + return AE_OK; + } + + switch (ctx->inf.type) { + case PMU_TYPE_L3C: + list_add(&ctx->next, &xgene_pmu->l3cpmus); + break; + case PMU_TYPE_IOB: + list_add(&ctx->next, &xgene_pmu->iobpmus); + break; + case PMU_TYPE_MCB: + list_add(&ctx->next, &xgene_pmu->mcbpmus); + break; + case PMU_TYPE_MC: + list_add(&ctx->next, &xgene_pmu->mcpmus); + break; + } + return AE_OK; +} + +static int acpi_pmu_probe_pmu_dev(struct xgene_pmu *xgene_pmu, + struct platform_device *pdev) +{ + struct device *dev = xgene_pmu->dev; + acpi_handle handle; + acpi_status status; + + handle = ACPI_HANDLE(dev); + if (!handle) + return -EINVAL; + + status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1, + acpi_pmu_dev_add, NULL, xgene_pmu, NULL); + if (ACPI_FAILURE(status)) { + dev_err(dev, "failed to probe PMU devices\n"); + return -ENODEV; + } + + return 0; +} +#else +static int acpi_pmu_probe_pmu_dev(struct xgene_pmu *xgene_pmu, + struct platform_device *pdev) +{ + return 0; +} +#endif + +static struct +xgene_pmu_dev_ctx *fdt_get_pmu_hw_inf(struct xgene_pmu *xgene_pmu, + struct device_node *np, u32 type) +{ + struct device *dev = xgene_pmu->dev; + struct xgene_pmu_dev_ctx *ctx; + struct hw_pmu_info *inf; + void __iomem *dev_csr; + struct resource res; + int enable_bit; + int rc; + + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return NULL; + rc = of_address_to_resource(np, 0, &res); + if (rc < 0) { + dev_err(dev, "PMU type %d: No resource address found\n", type); + goto err; + } + dev_csr = devm_ioremap_resource(dev, &res); + if (IS_ERR(dev_csr)) { + dev_err(dev, "PMU type %d: Fail to map resource\n", type); + goto err; + } + + /* A PMU device node without enable-bit-index is always enabled */ + if (of_property_read_u32(np, "enable-bit-index", &enable_bit)) + enable_bit = 0; + + ctx->name = xgene_pmu_dev_name(dev, type, enable_bit); + if (!ctx->name) { + dev_err(dev, "PMU type %d: Fail to get device name\n", type); + goto err; + } + inf = &ctx->inf; + inf->type = type; + inf->csr = dev_csr; + inf->enable_mask = 1 << enable_bit; + + return ctx; +err: + devm_kfree(dev, ctx); + return NULL; +} + +static int fdt_pmu_probe_pmu_dev(struct xgene_pmu *xgene_pmu, + struct platform_device *pdev) +{ + struct xgene_pmu_dev_ctx *ctx; + struct device_node *np; + + for_each_child_of_node(pdev->dev.of_node, np) { + if (!of_device_is_available(np)) + continue; + + if (of_device_is_compatible(np, "apm,xgene-pmu-l3c")) + ctx = fdt_get_pmu_hw_inf(xgene_pmu, np, PMU_TYPE_L3C); + else if (of_device_is_compatible(np, "apm,xgene-pmu-iob")) + ctx = fdt_get_pmu_hw_inf(xgene_pmu, np, PMU_TYPE_IOB); + else if (of_device_is_compatible(np, "apm,xgene-pmu-mcb")) + ctx = fdt_get_pmu_hw_inf(xgene_pmu, np, PMU_TYPE_MCB); + else if (of_device_is_compatible(np, "apm,xgene-pmu-mc")) + ctx = fdt_get_pmu_hw_inf(xgene_pmu, np, PMU_TYPE_MC); + else + ctx = NULL; + + if (!ctx) + continue; + + if (xgene_pmu_dev_add(xgene_pmu, ctx)) { + /* Can't add the PMU device, skip it */ + devm_kfree(xgene_pmu->dev, ctx); + continue; + } + + switch (ctx->inf.type) { + case PMU_TYPE_L3C: + list_add(&ctx->next, &xgene_pmu->l3cpmus); + break; + case PMU_TYPE_IOB: + list_add(&ctx->next, &xgene_pmu->iobpmus); + break; + case PMU_TYPE_MCB: + list_add(&ctx->next, &xgene_pmu->mcbpmus); + break; + case PMU_TYPE_MC: + list_add(&ctx->next, &xgene_pmu->mcpmus); + break; + } + } + + return 0; +} + +static int xgene_pmu_probe_pmu_dev(struct xgene_pmu *xgene_pmu, + struct platform_device *pdev) +{ + if (has_acpi_companion(&pdev->dev)) + return acpi_pmu_probe_pmu_dev(xgene_pmu, pdev); + return fdt_pmu_probe_pmu_dev(xgene_pmu, pdev); +} + +static const struct xgene_pmu_data xgene_pmu_data = { + .id = PCP_PMU_V1, +}; + +static const struct xgene_pmu_data xgene_pmu_v2_data = { + .id = PCP_PMU_V2, +}; + +static const struct of_device_id xgene_pmu_of_match[] = { + { .compatible = "apm,xgene-pmu", .data = &xgene_pmu_data }, + { .compatible = "apm,xgene-pmu-v2", .data = &xgene_pmu_v2_data }, + {}, +}; +MODULE_DEVICE_TABLE(of, xgene_pmu_of_match); +#ifdef CONFIG_ACPI +static const struct acpi_device_id xgene_pmu_acpi_match[] = { + {"APMC0D5B", PCP_PMU_V1}, + {"APMC0D5C", PCP_PMU_V2}, + {}, +}; +MODULE_DEVICE_TABLE(acpi, xgene_pmu_acpi_match); +#endif + +static int xgene_pmu_probe(struct platform_device *pdev) +{ + const struct xgene_pmu_data *dev_data; + const struct of_device_id *of_id; + struct xgene_pmu *xgene_pmu; + struct resource *res; + int irq, rc; + int version; + + xgene_pmu = devm_kzalloc(&pdev->dev, sizeof(*xgene_pmu), GFP_KERNEL); + if (!xgene_pmu) + return -ENOMEM; + xgene_pmu->dev = &pdev->dev; + platform_set_drvdata(pdev, xgene_pmu); + + version = -EINVAL; + of_id = of_match_device(xgene_pmu_of_match, &pdev->dev); + if (of_id) { + dev_data = (const struct xgene_pmu_data *) of_id->data; + version = dev_data->id; + } + +#ifdef CONFIG_ACPI + if (ACPI_COMPANION(&pdev->dev)) { + const struct acpi_device_id *acpi_id; + + acpi_id = acpi_match_device(xgene_pmu_acpi_match, &pdev->dev); + if (acpi_id) + version = (int) acpi_id->driver_data; + } +#endif + if (version < 0) + return -ENODEV; + + INIT_LIST_HEAD(&xgene_pmu->l3cpmus); + INIT_LIST_HEAD(&xgene_pmu->iobpmus); + INIT_LIST_HEAD(&xgene_pmu->mcbpmus); + INIT_LIST_HEAD(&xgene_pmu->mcpmus); + + xgene_pmu->version = version; + dev_info(&pdev->dev, "X-Gene PMU version %d\n", xgene_pmu->version); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + xgene_pmu->pcppmu_csr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(xgene_pmu->pcppmu_csr)) { + dev_err(&pdev->dev, "ioremap failed for PCP PMU resource\n"); + rc = PTR_ERR(xgene_pmu->pcppmu_csr); + goto err; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "No IRQ resource\n"); + rc = -EINVAL; + goto err; + } + rc = devm_request_irq(&pdev->dev, irq, xgene_pmu_isr, + IRQF_NOBALANCING | IRQF_NO_THREAD, + dev_name(&pdev->dev), xgene_pmu); + if (rc) { + dev_err(&pdev->dev, "Could not request IRQ %d\n", irq); + goto err; + } + + raw_spin_lock_init(&xgene_pmu->lock); + + /* Check for active MCBs and MCUs */ + rc = xgene_pmu_probe_active_mcb_mcu(xgene_pmu, pdev); + if (rc) { + dev_warn(&pdev->dev, "Unknown MCB/MCU active status\n"); + xgene_pmu->mcb_active_mask = 0x1; + xgene_pmu->mc_active_mask = 0x1; + } + + /* Pick one core to use for cpumask attributes */ + cpumask_set_cpu(smp_processor_id(), &xgene_pmu->cpu); + + /* Make sure that the overflow interrupt is handled by this CPU */ + rc = irq_set_affinity(irq, &xgene_pmu->cpu); + if (rc) { + dev_err(&pdev->dev, "Failed to set interrupt affinity!\n"); + goto err; + } + + /* Walk through the tree for all PMU perf devices */ + rc = xgene_pmu_probe_pmu_dev(xgene_pmu, pdev); + if (rc) { + dev_err(&pdev->dev, "No PMU perf devices found!\n"); + goto err; + } + + /* Enable interrupt */ + xgene_pmu_unmask_int(xgene_pmu); + + return 0; + +err: + if (xgene_pmu->pcppmu_csr) + devm_iounmap(&pdev->dev, xgene_pmu->pcppmu_csr); + devm_kfree(&pdev->dev, xgene_pmu); + + return rc; +} + +static void +xgene_pmu_dev_cleanup(struct xgene_pmu *xgene_pmu, struct list_head *pmus) +{ + struct xgene_pmu_dev_ctx *ctx; + struct device *dev = xgene_pmu->dev; + struct xgene_pmu_dev *pmu_dev; + + list_for_each_entry(ctx, pmus, next) { + pmu_dev = ctx->pmu_dev; + if (pmu_dev->inf->csr) + devm_iounmap(dev, pmu_dev->inf->csr); + devm_kfree(dev, ctx); + devm_kfree(dev, pmu_dev); + } +} + +static int xgene_pmu_remove(struct platform_device *pdev) +{ + struct xgene_pmu *xgene_pmu = dev_get_drvdata(&pdev->dev); + + xgene_pmu_dev_cleanup(xgene_pmu, &xgene_pmu->l3cpmus); + xgene_pmu_dev_cleanup(xgene_pmu, &xgene_pmu->iobpmus); + xgene_pmu_dev_cleanup(xgene_pmu, &xgene_pmu->mcbpmus); + xgene_pmu_dev_cleanup(xgene_pmu, &xgene_pmu->mcpmus); + + if (xgene_pmu->pcppmu_csr) + devm_iounmap(&pdev->dev, xgene_pmu->pcppmu_csr); + devm_kfree(&pdev->dev, xgene_pmu); + + return 0; +} + +static struct platform_driver xgene_pmu_driver = { + .probe = xgene_pmu_probe, + .remove = xgene_pmu_remove, + .driver = { + .name = "xgene-pmu", + .of_match_table = xgene_pmu_of_match, + .acpi_match_table = ACPI_PTR(xgene_pmu_acpi_match), + }, +}; + +builtin_platform_driver(xgene_pmu_driver); diff --git a/drivers/pinctrl/mvebu/pinctrl-orion.c b/drivers/pinctrl/mvebu/pinctrl-orion.c index 345c3df669a0..84e144167b44 100644 --- a/drivers/pinctrl/mvebu/pinctrl-orion.c +++ b/drivers/pinctrl/mvebu/pinctrl-orion.c @@ -64,11 +64,11 @@ static int orion_mpp_ctrl_set(unsigned pid, unsigned long config) return 0; } -#define V(f5181l, f5182, f5281) \ - ((f5181l << 0) | (f5182 << 1) | (f5281 << 2)) +#define V(f5181, f5182, f5281) \ + ((f5181 << 0) | (f5182 << 1) | (f5281 << 2)) enum orion_variant { - V_5181L = V(1, 0, 0), + V_5181 = V(1, 0, 0), V_5182 = V(0, 1, 0), V_5281 = V(0, 0, 1), V_ALL = V(1, 1, 1), @@ -103,13 +103,13 @@ static struct mvebu_mpp_mode orion_mpp_modes[] = { MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_ALL), MPP_VAR_FUNCTION(0x2, "pci", "req5", V_ALL), MPP_VAR_FUNCTION(0x4, "nand", "re0", V_5182 | V_5281), - MPP_VAR_FUNCTION(0x5, "pci-1", "clk", V_5181L), + MPP_VAR_FUNCTION(0x5, "pci-1", "clk", V_5181), MPP_VAR_FUNCTION(0x5, "sata0", "act", V_5182)), MPP_MODE(7, MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_ALL), MPP_VAR_FUNCTION(0x2, "pci", "gnt5", V_ALL), MPP_VAR_FUNCTION(0x4, "nand", "we0", V_5182 | V_5281), - MPP_VAR_FUNCTION(0x5, "pci-1", "clk", V_5181L), + MPP_VAR_FUNCTION(0x5, "pci-1", "clk", V_5181), MPP_VAR_FUNCTION(0x5, "sata1", "act", V_5182)), MPP_MODE(8, MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_ALL), @@ -165,7 +165,7 @@ static struct mvebu_mpp_ctrl orion_mpp_controls[] = { MPP_FUNC_CTRL(0, 19, NULL, orion_mpp_ctrl), }; -static struct pinctrl_gpio_range mv88f5181l_gpio_ranges[] = { +static struct pinctrl_gpio_range mv88f5181_gpio_ranges[] = { MPP_GPIO_RANGE(0, 0, 0, 16), }; @@ -177,14 +177,14 @@ static struct pinctrl_gpio_range mv88f5281_gpio_ranges[] = { MPP_GPIO_RANGE(0, 0, 0, 16), }; -static struct mvebu_pinctrl_soc_info mv88f5181l_info = { - .variant = V_5181L, +static struct mvebu_pinctrl_soc_info mv88f5181_info = { + .variant = V_5181, .controls = orion_mpp_controls, .ncontrols = ARRAY_SIZE(orion_mpp_controls), .modes = orion_mpp_modes, .nmodes = ARRAY_SIZE(orion_mpp_modes), - .gpioranges = mv88f5181l_gpio_ranges, - .ngpioranges = ARRAY_SIZE(mv88f5181l_gpio_ranges), + .gpioranges = mv88f5181_gpio_ranges, + .ngpioranges = ARRAY_SIZE(mv88f5181_gpio_ranges), }; static struct mvebu_pinctrl_soc_info mv88f5182_info = { @@ -212,7 +212,8 @@ static struct mvebu_pinctrl_soc_info mv88f5281_info = { * muxing, they are identical. */ static const struct of_device_id orion_pinctrl_of_match[] = { - { .compatible = "marvell,88f5181l-pinctrl", .data = &mv88f5181l_info }, + { .compatible = "marvell,88f5181-pinctrl", .data = &mv88f5181_info }, + { .compatible = "marvell,88f5181l-pinctrl", .data = &mv88f5181_info }, { .compatible = "marvell,88f5182-pinctrl", .data = &mv88f5182_info }, { .compatible = "marvell,88f5281-pinctrl", .data = &mv88f5281_info }, { } diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index 4be1b8c21f6f..06d9fa2f3bc0 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -14,9 +14,58 @@ menuconfig RESET_CONTROLLER if RESET_CONTROLLER +config RESET_ATH79 + bool "AR71xx Reset Driver" if COMPILE_TEST + default ATH79 + help + This enables the ATH79 reset controller driver that supports the + AR71xx SoC reset controller. + +config RESET_BERLIN + bool "Berlin Reset Driver" if COMPILE_TEST + default ARCH_BERLIN + help + This enables the reset controller driver for Marvell Berlin SoCs. + +config RESET_LPC18XX + bool "LPC18xx/43xx Reset Driver" if COMPILE_TEST + default ARCH_LPC18XX + help + This enables the reset controller driver for NXP LPC18xx/43xx SoCs. + +config RESET_MESON + bool "Meson Reset Driver" if COMPILE_TEST + default ARCH_MESON + help + This enables the reset driver for Amlogic Meson SoCs. + config RESET_OXNAS bool +config RESET_PISTACHIO + bool "Pistachio Reset Driver" if COMPILE_TEST + default MACH_PISTACHIO + help + This enables the reset driver for ImgTec Pistachio SoCs. + +config RESET_SOCFPGA + bool "SoCFPGA Reset Driver" if COMPILE_TEST + default ARCH_SOCFPGA + help + This enables the reset controller driver for Altera SoCFPGAs. + +config RESET_STM32 + bool "STM32 Reset Driver" if COMPILE_TEST + default ARCH_STM32 + help + This enables the RCC reset controller driver for STM32 MCUs. + +config RESET_SUNXI + bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI + default ARCH_SUNXI + help + This enables the reset driver for Allwinner SoCs. + config TI_SYSCON_RESET tristate "TI SYSCON Reset Driver" depends on HAS_IOMEM @@ -27,6 +76,22 @@ config TI_SYSCON_RESET you wish to use the reset framework for such memory-mapped devices, say Y here. Otherwise, say N. +config RESET_UNIPHIER + tristate "Reset controller driver for UniPhier SoCs" + depends on ARCH_UNIPHIER || COMPILE_TEST + depends on OF && MFD_SYSCON + default ARCH_UNIPHIER + help + Support for reset controllers on UniPhier SoCs. + Say Y if you want to control reset signals provided by System Control + block, Media I/O block, Peripheral Block. + +config RESET_ZYNQ + bool "ZYNQ Reset Driver" if COMPILE_TEST + default ARCH_ZYNQ + help + This enables the reset controller driver for Xilinx Zynq SoCs. + source "drivers/reset/sti/Kconfig" source "drivers/reset/hisilicon/Kconfig" diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index 5d65a93d3c43..bbe7026617fc 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -1,13 +1,15 @@ obj-y += core.o -obj-$(CONFIG_ARCH_LPC18XX) += reset-lpc18xx.o -obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o -obj-$(CONFIG_ARCH_BERLIN) += reset-berlin.o -obj-$(CONFIG_MACH_PISTACHIO) += reset-pistachio.o -obj-$(CONFIG_ARCH_MESON) += reset-meson.o -obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o +obj-y += hisilicon/ obj-$(CONFIG_ARCH_STI) += sti/ -obj-$(CONFIG_ARCH_HISI) += hisilicon/ -obj-$(CONFIG_ARCH_ZYNQ) += reset-zynq.o -obj-$(CONFIG_ATH79) += reset-ath79.o +obj-$(CONFIG_RESET_ATH79) += reset-ath79.o +obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o +obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o +obj-$(CONFIG_RESET_MESON) += reset-meson.o obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o +obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o +obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o +obj-$(CONFIG_RESET_STM32) += reset-stm32.o +obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o +obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o +obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o diff --git a/drivers/reset/core.c b/drivers/reset/core.c index 395dc9ce492e..b8ae1dbd4c17 100644 --- a/drivers/reset/core.c +++ b/drivers/reset/core.c @@ -138,7 +138,8 @@ EXPORT_SYMBOL_GPL(devm_reset_controller_register); */ int reset_control_reset(struct reset_control *rstc) { - if (WARN_ON(rstc->shared)) + if (WARN_ON(IS_ERR_OR_NULL(rstc)) || + WARN_ON(rstc->shared)) return -EINVAL; if (rstc->rcdev->ops->reset) @@ -161,6 +162,9 @@ EXPORT_SYMBOL_GPL(reset_control_reset); */ int reset_control_assert(struct reset_control *rstc) { + if (WARN_ON(IS_ERR_OR_NULL(rstc))) + return -EINVAL; + if (!rstc->rcdev->ops->assert) return -ENOTSUPP; @@ -184,6 +188,9 @@ EXPORT_SYMBOL_GPL(reset_control_assert); */ int reset_control_deassert(struct reset_control *rstc) { + if (WARN_ON(IS_ERR_OR_NULL(rstc))) + return -EINVAL; + if (!rstc->rcdev->ops->deassert) return -ENOTSUPP; @@ -204,6 +211,9 @@ EXPORT_SYMBOL_GPL(reset_control_deassert); */ int reset_control_status(struct reset_control *rstc) { + if (WARN_ON(IS_ERR_OR_NULL(rstc))) + return -EINVAL; + if (rstc->rcdev->ops->status) return rstc->rcdev->ops->status(rstc->rcdev, rstc->id); diff --git a/drivers/reset/hisilicon/Kconfig b/drivers/reset/hisilicon/Kconfig index 26bf95a83a8e..1ff8b0c80980 100644 --- a/drivers/reset/hisilicon/Kconfig +++ b/drivers/reset/hisilicon/Kconfig @@ -1,5 +1,6 @@ config COMMON_RESET_HI6220 tristate "Hi6220 Reset Driver" - depends on (ARCH_HISI && RESET_CONTROLLER) + depends on ARCH_HISI || COMPILE_TEST + default ARCH_HISI help Build the Hisilicon Hi6220 reset driver. diff --git a/drivers/reset/reset-ath79.c b/drivers/reset/reset-ath79.c index 16d410cd6146..6b97631f5489 100644 --- a/drivers/reset/reset-ath79.c +++ b/drivers/reset/reset-ath79.c @@ -12,6 +12,7 @@ * GNU General Public License for more details. */ +#include <linux/io.h> #include <linux/module.h> #include <linux/platform_device.h> #include <linux/reset-controller.h> diff --git a/drivers/reset/reset-socfpga.c b/drivers/reset/reset-socfpga.c index 12add9b0fa49..78ebf8424375 100644 --- a/drivers/reset/reset-socfpga.c +++ b/drivers/reset/reset-socfpga.c @@ -28,7 +28,6 @@ struct socfpga_reset_data { spinlock_t lock; void __iomem *membase; - u32 modrst_offset; struct reset_controller_dev rcdev; }; @@ -45,9 +44,8 @@ static int socfpga_reset_assert(struct reset_controller_dev *rcdev, spin_lock_irqsave(&data->lock, flags); - reg = readl(data->membase + data->modrst_offset + (bank * NR_BANKS)); - writel(reg | BIT(offset), data->membase + data->modrst_offset + - (bank * NR_BANKS)); + reg = readl(data->membase + (bank * NR_BANKS)); + writel(reg | BIT(offset), data->membase + (bank * NR_BANKS)); spin_unlock_irqrestore(&data->lock, flags); return 0; @@ -67,9 +65,8 @@ static int socfpga_reset_deassert(struct reset_controller_dev *rcdev, spin_lock_irqsave(&data->lock, flags); - reg = readl(data->membase + data->modrst_offset + (bank * NR_BANKS)); - writel(reg & ~BIT(offset), data->membase + data->modrst_offset + - (bank * NR_BANKS)); + reg = readl(data->membase + (bank * NR_BANKS)); + writel(reg & ~BIT(offset), data->membase + (bank * NR_BANKS)); spin_unlock_irqrestore(&data->lock, flags); @@ -85,7 +82,7 @@ static int socfpga_reset_status(struct reset_controller_dev *rcdev, int offset = id % BITS_PER_LONG; u32 reg; - reg = readl(data->membase + data->modrst_offset + (bank * NR_BANKS)); + reg = readl(data->membase + (bank * NR_BANKS)); return !(reg & BIT(offset)); } @@ -102,6 +99,7 @@ static int socfpga_reset_probe(struct platform_device *pdev) struct resource *res; struct device *dev = &pdev->dev; struct device_node *np = dev->of_node; + u32 modrst_offset; /* * The binding was mainlined without the required property. @@ -122,10 +120,11 @@ static int socfpga_reset_probe(struct platform_device *pdev) if (IS_ERR(data->membase)) return PTR_ERR(data->membase); - if (of_property_read_u32(np, "altr,modrst-offset", &data->modrst_offset)) { + if (of_property_read_u32(np, "altr,modrst-offset", &modrst_offset)) { dev_warn(dev, "missing altr,modrst-offset property, assuming 0x10!\n"); - data->modrst_offset = 0x10; + modrst_offset = 0x10; } + data->membase += modrst_offset; spin_lock_init(&data->lock); diff --git a/drivers/reset/reset-stm32.c b/drivers/reset/reset-stm32.c new file mode 100644 index 000000000000..3a7c8527e66a --- /dev/null +++ b/drivers/reset/reset-stm32.c @@ -0,0 +1,108 @@ +/* + * Copyright (C) Maxime Coquelin 2015 + * Author: Maxime Coquelin <mcoquelin.stm32@gmail.com> + * License terms: GNU General Public License (GPL), version 2 + * + * Heavily based on sunxi driver from Maxime Ripard. + */ + +#include <linux/err.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/reset-controller.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/types.h> + +struct stm32_reset_data { + spinlock_t lock; + void __iomem *membase; + struct reset_controller_dev rcdev; +}; + +static int stm32_reset_assert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct stm32_reset_data *data = container_of(rcdev, + struct stm32_reset_data, + rcdev); + int bank = id / BITS_PER_LONG; + int offset = id % BITS_PER_LONG; + unsigned long flags; + u32 reg; + + spin_lock_irqsave(&data->lock, flags); + + reg = readl(data->membase + (bank * 4)); + writel(reg | BIT(offset), data->membase + (bank * 4)); + + spin_unlock_irqrestore(&data->lock, flags); + + return 0; +} + +static int stm32_reset_deassert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct stm32_reset_data *data = container_of(rcdev, + struct stm32_reset_data, + rcdev); + int bank = id / BITS_PER_LONG; + int offset = id % BITS_PER_LONG; + unsigned long flags; + u32 reg; + + spin_lock_irqsave(&data->lock, flags); + + reg = readl(data->membase + (bank * 4)); + writel(reg & ~BIT(offset), data->membase + (bank * 4)); + + spin_unlock_irqrestore(&data->lock, flags); + + return 0; +} + +static const struct reset_control_ops stm32_reset_ops = { + .assert = stm32_reset_assert, + .deassert = stm32_reset_deassert, +}; + +static const struct of_device_id stm32_reset_dt_ids[] = { + { .compatible = "st,stm32-rcc", }, + { /* sentinel */ }, +}; + +static int stm32_reset_probe(struct platform_device *pdev) +{ + struct stm32_reset_data *data; + struct resource *res; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + data->membase = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(data->membase)) + return PTR_ERR(data->membase); + + spin_lock_init(&data->lock); + + data->rcdev.owner = THIS_MODULE; + data->rcdev.nr_resets = resource_size(res) * 8; + data->rcdev.ops = &stm32_reset_ops; + data->rcdev.of_node = pdev->dev.of_node; + + return devm_reset_controller_register(&pdev->dev, &data->rcdev); +} + +static struct platform_driver stm32_reset_driver = { + .probe = stm32_reset_probe, + .driver = { + .name = "stm32-rcc-reset", + .of_match_table = stm32_reset_dt_ids, + }, +}; +builtin_platform_driver(stm32_reset_driver); diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c new file mode 100644 index 000000000000..8b2558e7363e --- /dev/null +++ b/drivers/reset/reset-uniphier.c @@ -0,0 +1,440 @@ +/* + * Copyright (C) 2016 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/reset-controller.h> + +struct uniphier_reset_data { + unsigned int id; + unsigned int reg; + unsigned int bit; + unsigned int flags; +#define UNIPHIER_RESET_ACTIVE_LOW BIT(0) +}; + +#define UNIPHIER_RESET_ID_END (unsigned int)(-1) + +#define UNIPHIER_RESET_END \ + { .id = UNIPHIER_RESET_ID_END } + +#define UNIPHIER_RESET(_id, _reg, _bit) \ + { \ + .id = (_id), \ + .reg = (_reg), \ + .bit = (_bit), \ + } + +#define UNIPHIER_RESETX(_id, _reg, _bit) \ + { \ + .id = (_id), \ + .reg = (_reg), \ + .bit = (_bit), \ + .flags = UNIPHIER_RESET_ACTIVE_LOW, \ + } + +/* System reset data */ +#define UNIPHIER_SLD3_SYS_RESET_STDMAC(id) \ + UNIPHIER_RESETX((id), 0x2000, 10) + +#define UNIPHIER_LD11_SYS_RESET_STDMAC(id) \ + UNIPHIER_RESETX((id), 0x200c, 8) + +#define UNIPHIER_PRO4_SYS_RESET_GIO(id) \ + UNIPHIER_RESETX((id), 0x2000, 6) + +#define UNIPHIER_LD20_SYS_RESET_GIO(id) \ + UNIPHIER_RESETX((id), 0x200c, 5) + +#define UNIPHIER_PRO4_SYS_RESET_USB3(id, ch) \ + UNIPHIER_RESETX((id), 0x2000 + 0x4 * (ch), 17) + +const struct uniphier_reset_data uniphier_sld3_sys_reset_data[] = { + UNIPHIER_SLD3_SYS_RESET_STDMAC(8), /* Ether, HSC, MIO */ + UNIPHIER_RESET_END, +}; + +const struct uniphier_reset_data uniphier_pro4_sys_reset_data[] = { + UNIPHIER_SLD3_SYS_RESET_STDMAC(8), /* HSC, MIO, RLE */ + UNIPHIER_PRO4_SYS_RESET_GIO(12), /* Ether, SATA, USB3 */ + UNIPHIER_PRO4_SYS_RESET_USB3(14, 0), + UNIPHIER_PRO4_SYS_RESET_USB3(15, 1), + UNIPHIER_RESET_END, +}; + +const struct uniphier_reset_data uniphier_pro5_sys_reset_data[] = { + UNIPHIER_SLD3_SYS_RESET_STDMAC(8), /* HSC */ + UNIPHIER_PRO4_SYS_RESET_GIO(12), /* PCIe, USB3 */ + UNIPHIER_PRO4_SYS_RESET_USB3(14, 0), + UNIPHIER_PRO4_SYS_RESET_USB3(15, 1), + UNIPHIER_RESET_END, +}; + +const struct uniphier_reset_data uniphier_pxs2_sys_reset_data[] = { + UNIPHIER_SLD3_SYS_RESET_STDMAC(8), /* HSC, RLE */ + UNIPHIER_PRO4_SYS_RESET_USB3(14, 0), + UNIPHIER_PRO4_SYS_RESET_USB3(15, 1), + UNIPHIER_RESETX(16, 0x2014, 4), /* USB30-PHY0 */ + UNIPHIER_RESETX(17, 0x2014, 0), /* USB30-PHY1 */ + UNIPHIER_RESETX(18, 0x2014, 2), /* USB30-PHY2 */ + UNIPHIER_RESETX(20, 0x2014, 5), /* USB31-PHY0 */ + UNIPHIER_RESETX(21, 0x2014, 1), /* USB31-PHY1 */ + UNIPHIER_RESETX(28, 0x2014, 12), /* SATA */ + UNIPHIER_RESET(29, 0x2014, 8), /* SATA-PHY (active high) */ + UNIPHIER_RESET_END, +}; + +const struct uniphier_reset_data uniphier_ld11_sys_reset_data[] = { + UNIPHIER_LD11_SYS_RESET_STDMAC(8), /* HSC, MIO */ + UNIPHIER_RESET_END, +}; + +const struct uniphier_reset_data uniphier_ld20_sys_reset_data[] = { + UNIPHIER_LD11_SYS_RESET_STDMAC(8), /* HSC */ + UNIPHIER_LD20_SYS_RESET_GIO(12), /* PCIe, USB3 */ + UNIPHIER_RESETX(16, 0x200c, 12), /* USB30-PHY0 */ + UNIPHIER_RESETX(17, 0x200c, 13), /* USB30-PHY1 */ + UNIPHIER_RESETX(18, 0x200c, 14), /* USB30-PHY2 */ + UNIPHIER_RESETX(19, 0x200c, 15), /* USB30-PHY3 */ + UNIPHIER_RESET_END, +}; + +/* Media I/O reset data */ +#define UNIPHIER_MIO_RESET_SD(id, ch) \ + UNIPHIER_RESETX((id), 0x110 + 0x200 * (ch), 0) + +#define UNIPHIER_MIO_RESET_SD_BRIDGE(id, ch) \ + UNIPHIER_RESETX((id), 0x110 + 0x200 * (ch), 26) + +#define UNIPHIER_MIO_RESET_EMMC_HW_RESET(id, ch) \ + UNIPHIER_RESETX((id), 0x80 + 0x200 * (ch), 0) + +#define UNIPHIER_MIO_RESET_USB2(id, ch) \ + UNIPHIER_RESETX((id), 0x114 + 0x200 * (ch), 0) + +#define UNIPHIER_MIO_RESET_USB2_BRIDGE(id, ch) \ + UNIPHIER_RESETX((id), 0x110 + 0x200 * (ch), 24) + +#define UNIPHIER_MIO_RESET_DMAC(id) \ + UNIPHIER_RESETX((id), 0x110, 17) + +const struct uniphier_reset_data uniphier_sld3_mio_reset_data[] = { + UNIPHIER_MIO_RESET_SD(0, 0), + UNIPHIER_MIO_RESET_SD(1, 1), + UNIPHIER_MIO_RESET_SD(2, 2), + UNIPHIER_MIO_RESET_SD_BRIDGE(3, 0), + UNIPHIER_MIO_RESET_SD_BRIDGE(4, 1), + UNIPHIER_MIO_RESET_SD_BRIDGE(5, 2), + UNIPHIER_MIO_RESET_EMMC_HW_RESET(6, 1), + UNIPHIER_MIO_RESET_DMAC(7), + UNIPHIER_MIO_RESET_USB2(8, 0), + UNIPHIER_MIO_RESET_USB2(9, 1), + UNIPHIER_MIO_RESET_USB2(10, 2), + UNIPHIER_MIO_RESET_USB2(11, 3), + UNIPHIER_MIO_RESET_USB2_BRIDGE(12, 0), + UNIPHIER_MIO_RESET_USB2_BRIDGE(13, 1), + UNIPHIER_MIO_RESET_USB2_BRIDGE(14, 2), + UNIPHIER_MIO_RESET_USB2_BRIDGE(15, 3), + UNIPHIER_RESET_END, +}; + +const struct uniphier_reset_data uniphier_pro5_mio_reset_data[] = { + UNIPHIER_MIO_RESET_SD(0, 0), + UNIPHIER_MIO_RESET_SD(1, 1), + UNIPHIER_MIO_RESET_EMMC_HW_RESET(6, 1), + UNIPHIER_RESET_END, +}; + +/* Peripheral reset data */ +#define UNIPHIER_PERI_RESET_UART(id, ch) \ + UNIPHIER_RESETX((id), 0x114, 19 + (ch)) + +#define UNIPHIER_PERI_RESET_I2C(id, ch) \ + UNIPHIER_RESETX((id), 0x114, 5 + (ch)) + +#define UNIPHIER_PERI_RESET_FI2C(id, ch) \ + UNIPHIER_RESETX((id), 0x114, 24 + (ch)) + +const struct uniphier_reset_data uniphier_ld4_peri_reset_data[] = { + UNIPHIER_PERI_RESET_UART(0, 0), + UNIPHIER_PERI_RESET_UART(1, 1), + UNIPHIER_PERI_RESET_UART(2, 2), + UNIPHIER_PERI_RESET_UART(3, 3), + UNIPHIER_PERI_RESET_I2C(4, 0), + UNIPHIER_PERI_RESET_I2C(5, 1), + UNIPHIER_PERI_RESET_I2C(6, 2), + UNIPHIER_PERI_RESET_I2C(7, 3), + UNIPHIER_PERI_RESET_I2C(8, 4), + UNIPHIER_RESET_END, +}; + +const struct uniphier_reset_data uniphier_pro4_peri_reset_data[] = { + UNIPHIER_PERI_RESET_UART(0, 0), + UNIPHIER_PERI_RESET_UART(1, 1), + UNIPHIER_PERI_RESET_UART(2, 2), + UNIPHIER_PERI_RESET_UART(3, 3), + UNIPHIER_PERI_RESET_FI2C(4, 0), + UNIPHIER_PERI_RESET_FI2C(5, 1), + UNIPHIER_PERI_RESET_FI2C(6, 2), + UNIPHIER_PERI_RESET_FI2C(7, 3), + UNIPHIER_PERI_RESET_FI2C(8, 4), + UNIPHIER_PERI_RESET_FI2C(9, 5), + UNIPHIER_PERI_RESET_FI2C(10, 6), + UNIPHIER_RESET_END, +}; + +/* core implementaton */ +struct uniphier_reset_priv { + struct reset_controller_dev rcdev; + struct device *dev; + struct regmap *regmap; + const struct uniphier_reset_data *data; +}; + +#define to_uniphier_reset_priv(_rcdev) \ + container_of(_rcdev, struct uniphier_reset_priv, rcdev) + +static int uniphier_reset_update(struct reset_controller_dev *rcdev, + unsigned long id, int assert) +{ + struct uniphier_reset_priv *priv = to_uniphier_reset_priv(rcdev); + const struct uniphier_reset_data *p; + + for (p = priv->data; p->id != UNIPHIER_RESET_ID_END; p++) { + unsigned int mask, val; + + if (p->id != id) + continue; + + mask = BIT(p->bit); + + if (assert) + val = mask; + else + val = ~mask; + + if (p->flags & UNIPHIER_RESET_ACTIVE_LOW) + val = ~val; + + return regmap_write_bits(priv->regmap, p->reg, mask, val); + } + + dev_err(priv->dev, "reset_id=%lu was not handled\n", id); + return -EINVAL; +} + +static int uniphier_reset_assert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + return uniphier_reset_update(rcdev, id, 1); +} + +static int uniphier_reset_deassert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + return uniphier_reset_update(rcdev, id, 0); +} + +static int uniphier_reset_status(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct uniphier_reset_priv *priv = to_uniphier_reset_priv(rcdev); + const struct uniphier_reset_data *p; + + for (p = priv->data; p->id != UNIPHIER_RESET_ID_END; p++) { + unsigned int val; + int ret, asserted; + + if (p->id != id) + continue; + + ret = regmap_read(priv->regmap, p->reg, &val); + if (ret) + return ret; + + asserted = !!(val & BIT(p->bit)); + + if (p->flags & UNIPHIER_RESET_ACTIVE_LOW) + asserted = !asserted; + + return asserted; + } + + dev_err(priv->dev, "reset_id=%lu was not found\n", id); + return -EINVAL; +} + +static const struct reset_control_ops uniphier_reset_ops = { + .assert = uniphier_reset_assert, + .deassert = uniphier_reset_deassert, + .status = uniphier_reset_status, +}; + +static int uniphier_reset_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct uniphier_reset_priv *priv; + const struct uniphier_reset_data *p, *data; + struct regmap *regmap; + struct device_node *parent; + unsigned int nr_resets = 0; + + data = of_device_get_match_data(dev); + if (WARN_ON(!data)) + return -EINVAL; + + parent = of_get_parent(dev->of_node); /* parent should be syscon node */ + regmap = syscon_node_to_regmap(parent); + of_node_put(parent); + if (IS_ERR(regmap)) { + dev_err(dev, "failed to get regmap (error %ld)\n", + PTR_ERR(regmap)); + return PTR_ERR(regmap); + } + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + for (p = data; p->id != UNIPHIER_RESET_ID_END; p++) + nr_resets = max(nr_resets, p->id + 1); + + priv->rcdev.ops = &uniphier_reset_ops; + priv->rcdev.owner = dev->driver->owner; + priv->rcdev.of_node = dev->of_node; + priv->rcdev.nr_resets = nr_resets; + priv->dev = dev; + priv->regmap = regmap; + priv->data = data; + + return devm_reset_controller_register(&pdev->dev, &priv->rcdev); +} + +static const struct of_device_id uniphier_reset_match[] = { + /* System reset */ + { + .compatible = "socionext,uniphier-sld3-reset", + .data = uniphier_sld3_sys_reset_data, + }, + { + .compatible = "socionext,uniphier-ld4-reset", + .data = uniphier_sld3_sys_reset_data, + }, + { + .compatible = "socionext,uniphier-pro4-reset", + .data = uniphier_pro4_sys_reset_data, + }, + { + .compatible = "socionext,uniphier-sld8-reset", + .data = uniphier_sld3_sys_reset_data, + }, + { + .compatible = "socionext,uniphier-pro5-reset", + .data = uniphier_pro5_sys_reset_data, + }, + { + .compatible = "socionext,uniphier-pxs2-reset", + .data = uniphier_pxs2_sys_reset_data, + }, + { + .compatible = "socionext,uniphier-ld11-reset", + .data = uniphier_ld11_sys_reset_data, + }, + { + .compatible = "socionext,uniphier-ld20-reset", + .data = uniphier_ld20_sys_reset_data, + }, + /* Media I/O reset */ + { + .compatible = "socionext,uniphier-sld3-mio-reset", + .data = uniphier_sld3_mio_reset_data, + }, + { + .compatible = "socionext,uniphier-ld4-mio-reset", + .data = uniphier_sld3_mio_reset_data, + }, + { + .compatible = "socionext,uniphier-pro4-mio-reset", + .data = uniphier_sld3_mio_reset_data, + }, + { + .compatible = "socionext,uniphier-sld8-mio-reset", + .data = uniphier_sld3_mio_reset_data, + }, + { + .compatible = "socionext,uniphier-pro5-mio-reset", + .data = uniphier_pro5_mio_reset_data, + }, + { + .compatible = "socionext,uniphier-pxs2-mio-reset", + .data = uniphier_pro5_mio_reset_data, + }, + { + .compatible = "socionext,uniphier-ld11-mio-reset", + .data = uniphier_sld3_mio_reset_data, + }, + { + .compatible = "socionext,uniphier-ld20-mio-reset", + .data = uniphier_pro5_mio_reset_data, + }, + /* Peripheral reset */ + { + .compatible = "socionext,uniphier-ld4-peri-reset", + .data = uniphier_ld4_peri_reset_data, + }, + { + .compatible = "socionext,uniphier-pro4-peri-reset", + .data = uniphier_pro4_peri_reset_data, + }, + { + .compatible = "socionext,uniphier-sld8-peri-reset", + .data = uniphier_ld4_peri_reset_data, + }, + { + .compatible = "socionext,uniphier-pro5-peri-reset", + .data = uniphier_pro4_peri_reset_data, + }, + { + .compatible = "socionext,uniphier-pxs2-peri-reset", + .data = uniphier_pro4_peri_reset_data, + }, + { + .compatible = "socionext,uniphier-ld11-peri-reset", + .data = uniphier_pro4_peri_reset_data, + }, + { + .compatible = "socionext,uniphier-ld20-peri-reset", + .data = uniphier_pro4_peri_reset_data, + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, uniphier_reset_match); + +static struct platform_driver uniphier_reset_driver = { + .probe = uniphier_reset_probe, + .driver = { + .name = "uniphier-reset", + .of_match_table = uniphier_reset_match, + }, +}; +module_platform_driver(uniphier_reset_driver); + +MODULE_AUTHOR("Masahiro Yamada <yamada.masahiro@socionext.com>"); +MODULE_DESCRIPTION("UniPhier Reset Controller Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c b/drivers/soc/mediatek/mtk-pmic-wrap.c index a003ba26ca6e..a5f10936fb9c 100644 --- a/drivers/soc/mediatek/mtk-pmic-wrap.c +++ b/drivers/soc/mediatek/mtk-pmic-wrap.c @@ -583,7 +583,7 @@ static int pwrap_wait_for_state(struct pmic_wrapper *wrp, { unsigned long timeout; - timeout = jiffies + usecs_to_jiffies(255); + timeout = jiffies + usecs_to_jiffies(10000); do { if (time_after(jiffies, timeout)) diff --git a/drivers/soc/qcom/smd.c b/drivers/soc/qcom/smd.c index ac1957dfdf24..322034ab9d37 100644 --- a/drivers/soc/qcom/smd.c +++ b/drivers/soc/qcom/smd.c @@ -95,7 +95,7 @@ static const struct { /** * struct qcom_smd_edge - representing a remote processor - * @smd: handle to qcom_smd + * @dev: device for this edge * @of_node: of_node handle for information related to this edge * @edge_id: identifier of this edge * @remote_pid: identifier of remote processor @@ -111,7 +111,8 @@ static const struct { * @state_work: work item for edge state changes */ struct qcom_smd_edge { - struct qcom_smd *smd; + struct device dev; + struct device_node *of_node; unsigned edge_id; unsigned remote_pid; @@ -135,6 +136,8 @@ struct qcom_smd_edge { struct work_struct state_work; }; +#define to_smd_edge(d) container_of(d, struct qcom_smd_edge, dev) + /* * SMD channel states. */ @@ -197,20 +200,6 @@ struct qcom_smd_channel { void *drvdata; struct list_head list; - struct list_head dev_list; -}; - -/** - * struct qcom_smd - smd struct - * @dev: device struct - * @num_edges: number of entries in @edges - * @edges: array of edges to be handled - */ -struct qcom_smd { - struct device *dev; - - unsigned num_edges; - struct qcom_smd_edge edges[0]; }; /* @@ -374,7 +363,7 @@ static void qcom_smd_channel_reset(struct qcom_smd_channel *channel) SET_TX_CHANNEL_FLAG(channel, fSTATE, 1); SET_TX_CHANNEL_FLAG(channel, fBLOCKREADINTR, 1); SET_TX_CHANNEL_INFO(channel, head, 0); - SET_TX_CHANNEL_INFO(channel, tail, 0); + SET_RX_CHANNEL_INFO(channel, tail, 0); qcom_smd_signal_channel(channel); @@ -421,7 +410,7 @@ static void qcom_smd_channel_set_state(struct qcom_smd_channel *channel, if (channel->state == state) return; - dev_dbg(edge->smd->dev, "set_state(%s, %d)\n", channel->name, state); + dev_dbg(&edge->dev, "set_state(%s, %d)\n", channel->name, state); SET_TX_CHANNEL_FLAG(channel, fDSR, is_open); SET_TX_CHANNEL_FLAG(channel, fCTS, is_open); @@ -891,8 +880,6 @@ static int qcom_smd_dev_remove(struct device *dev) struct qcom_smd_device *qsdev = to_smd_device(dev); struct qcom_smd_driver *qsdrv = to_smd_driver(dev); struct qcom_smd_channel *channel = qsdev->channel; - struct qcom_smd_channel *tmp; - struct qcom_smd_channel *ch; qcom_smd_channel_set_state(channel, SMD_CHANNEL_CLOSING); @@ -911,15 +898,9 @@ static int qcom_smd_dev_remove(struct device *dev) if (qsdrv->remove) qsdrv->remove(qsdev); - /* - * The client is now gone, close and release all channels associated - * with this sdev - */ - list_for_each_entry_safe(ch, tmp, &channel->dev_list, dev_list) { - qcom_smd_channel_close(ch); - list_del(&ch->dev_list); - ch->qsdev = NULL; - } + /* The client is now gone, close the primary channel */ + qcom_smd_channel_close(channel); + channel->qsdev = NULL; return 0; } @@ -973,13 +954,12 @@ static int qcom_smd_create_device(struct qcom_smd_channel *channel) struct qcom_smd_device *qsdev; struct qcom_smd_edge *edge = channel->edge; struct device_node *node; - struct qcom_smd *smd = edge->smd; int ret; if (channel->qsdev) return -EEXIST; - dev_dbg(smd->dev, "registering '%s'\n", channel->name); + dev_dbg(&edge->dev, "registering '%s'\n", channel->name); qsdev = kzalloc(sizeof(*qsdev), GFP_KERNEL); if (!qsdev) @@ -990,7 +970,7 @@ static int qcom_smd_create_device(struct qcom_smd_channel *channel) edge->of_node->name, node ? node->name : channel->name); - qsdev->dev.parent = smd->dev; + qsdev->dev.parent = &edge->dev; qsdev->dev.bus = &qcom_smd_bus; qsdev->dev.release = qcom_smd_release_device; qsdev->dev.of_node = node; @@ -1001,7 +981,7 @@ static int qcom_smd_create_device(struct qcom_smd_channel *channel) ret = device_register(&qsdev->dev); if (ret) { - dev_err(smd->dev, "device_register failed: %d\n", ret); + dev_err(&edge->dev, "device_register failed: %d\n", ret); put_device(&qsdev->dev); } @@ -1091,6 +1071,8 @@ qcom_smd_find_channel(struct qcom_smd_edge *edge, const char *name) * * Returns a channel handle on success, or -EPROBE_DEFER if the channel isn't * ready. + * + * Any channels returned must be closed with a call to qcom_smd_close_channel() */ struct qcom_smd_channel *qcom_smd_open_channel(struct qcom_smd_channel *parent, const char *name, @@ -1120,15 +1102,21 @@ struct qcom_smd_channel *qcom_smd_open_channel(struct qcom_smd_channel *parent, return ERR_PTR(ret); } - /* - * Append the list of channel to the channels associated with the sdev - */ - list_add_tail(&channel->dev_list, &sdev->channel->dev_list); - return channel; } EXPORT_SYMBOL(qcom_smd_open_channel); +/** + * qcom_smd_close_channel() - close an additionally opened channel + * @channel: channel handle, returned by qcom_smd_open_channel() + */ +void qcom_smd_close_channel(struct qcom_smd_channel *channel) +{ + qcom_smd_channel_close(channel); + channel->qsdev = NULL; +} +EXPORT_SYMBOL(qcom_smd_close_channel); + /* * Allocate the qcom_smd_channel object for a newly found smd channel, * retrieving and validating the smem items involved. @@ -1139,20 +1127,18 @@ static struct qcom_smd_channel *qcom_smd_create_channel(struct qcom_smd_edge *ed char *name) { struct qcom_smd_channel *channel; - struct qcom_smd *smd = edge->smd; size_t fifo_size; size_t info_size; void *fifo_base; void *info; int ret; - channel = devm_kzalloc(smd->dev, sizeof(*channel), GFP_KERNEL); + channel = devm_kzalloc(&edge->dev, sizeof(*channel), GFP_KERNEL); if (!channel) return ERR_PTR(-ENOMEM); - INIT_LIST_HEAD(&channel->dev_list); channel->edge = edge; - channel->name = devm_kstrdup(smd->dev, name, GFP_KERNEL); + channel->name = devm_kstrdup(&edge->dev, name, GFP_KERNEL); if (!channel->name) return ERR_PTR(-ENOMEM); @@ -1175,7 +1161,7 @@ static struct qcom_smd_channel *qcom_smd_create_channel(struct qcom_smd_edge *ed } else if (info_size == 2 * sizeof(struct smd_channel_info)) { channel->info = info; } else { - dev_err(smd->dev, + dev_err(&edge->dev, "channel info of size %zu not supported\n", info_size); ret = -EINVAL; goto free_name_and_channel; @@ -1190,7 +1176,7 @@ static struct qcom_smd_channel *qcom_smd_create_channel(struct qcom_smd_edge *ed /* The channel consist of a rx and tx fifo of equal size */ fifo_size /= 2; - dev_dbg(smd->dev, "new channel '%s' info-size: %zu fifo-size: %zu\n", + dev_dbg(&edge->dev, "new channel '%s' info-size: %zu fifo-size: %zu\n", name, info_size, fifo_size); channel->tx_fifo = fifo_base; @@ -1202,8 +1188,8 @@ static struct qcom_smd_channel *qcom_smd_create_channel(struct qcom_smd_edge *ed return channel; free_name_and_channel: - devm_kfree(smd->dev, channel->name); - devm_kfree(smd->dev, channel); + devm_kfree(&edge->dev, channel->name); + devm_kfree(&edge->dev, channel); return ERR_PTR(ret); } @@ -1219,7 +1205,6 @@ static void qcom_channel_scan_worker(struct work_struct *work) struct qcom_smd_alloc_entry *alloc_tbl; struct qcom_smd_alloc_entry *entry; struct qcom_smd_channel *channel; - struct qcom_smd *smd = edge->smd; unsigned long flags; unsigned fifo_id; unsigned info_id; @@ -1263,7 +1248,7 @@ static void qcom_channel_scan_worker(struct work_struct *work) list_add(&channel->list, &edge->channels); spin_unlock_irqrestore(&edge->channels_lock, flags); - dev_dbg(smd->dev, "new channel found: '%s'\n", channel->name); + dev_dbg(&edge->dev, "new channel found: '%s'\n", channel->name); set_bit(i, edge->allocated[tbl]); wake_up_interruptible(&edge->new_channel_event); @@ -1350,22 +1335,6 @@ static int qcom_smd_parse_edge(struct device *dev, edge->of_node = of_node_get(node); - irq = irq_of_parse_and_map(node, 0); - if (irq < 0) { - dev_err(dev, "required smd interrupt missing\n"); - return -EINVAL; - } - - ret = devm_request_irq(dev, irq, - qcom_smd_edge_intr, IRQF_TRIGGER_RISING, - node->name, edge); - if (ret) { - dev_err(dev, "failed to request smd irq\n"); - return ret; - } - - edge->irq = irq; - key = "qcom,smd-edge"; ret = of_property_read_u32(node, key, &edge->edge_id); if (ret) { @@ -1400,18 +1369,121 @@ static int qcom_smd_parse_edge(struct device *dev, return -EINVAL; } + irq = irq_of_parse_and_map(node, 0); + if (irq < 0) { + dev_err(dev, "required smd interrupt missing\n"); + return -EINVAL; + } + + ret = devm_request_irq(dev, irq, + qcom_smd_edge_intr, IRQF_TRIGGER_RISING, + node->name, edge); + if (ret) { + dev_err(dev, "failed to request smd irq\n"); + return ret; + } + + edge->irq = irq; + return 0; } -static int qcom_smd_probe(struct platform_device *pdev) +/* + * Release function for an edge. + * Reset the state of each associated channel and free the edge context. + */ +static void qcom_smd_edge_release(struct device *dev) +{ + struct qcom_smd_channel *channel; + struct qcom_smd_edge *edge = to_smd_edge(dev); + + list_for_each_entry(channel, &edge->channels, list) { + SET_RX_CHANNEL_INFO(channel, state, SMD_CHANNEL_CLOSED); + SET_RX_CHANNEL_INFO(channel, head, 0); + SET_RX_CHANNEL_INFO(channel, tail, 0); + } + + kfree(edge); +} + +/** + * qcom_smd_register_edge() - register an edge based on an device_node + * @parent: parent device for the edge + * @node: device_node describing the edge + * + * Returns an edge reference, or negative ERR_PTR() on failure. + */ +struct qcom_smd_edge *qcom_smd_register_edge(struct device *parent, + struct device_node *node) { struct qcom_smd_edge *edge; - struct device_node *node; - struct qcom_smd *smd; - size_t array_size; - int num_edges; int ret; - int i = 0; + + edge = kzalloc(sizeof(*edge), GFP_KERNEL); + if (!edge) + return ERR_PTR(-ENOMEM); + + init_waitqueue_head(&edge->new_channel_event); + + edge->dev.parent = parent; + edge->dev.release = qcom_smd_edge_release; + dev_set_name(&edge->dev, "%s:%s", dev_name(parent), node->name); + ret = device_register(&edge->dev); + if (ret) { + pr_err("failed to register smd edge\n"); + return ERR_PTR(ret); + } + + ret = qcom_smd_parse_edge(&edge->dev, node, edge); + if (ret) { + dev_err(&edge->dev, "failed to parse smd edge\n"); + goto unregister_dev; + } + + schedule_work(&edge->scan_work); + + return edge; + +unregister_dev: + put_device(&edge->dev); + return ERR_PTR(ret); +} +EXPORT_SYMBOL(qcom_smd_register_edge); + +static int qcom_smd_remove_device(struct device *dev, void *data) +{ + device_unregister(dev); + of_node_put(dev->of_node); + put_device(dev); + + return 0; +} + +/** + * qcom_smd_unregister_edge() - release an edge and its children + * @edge: edge reference acquired from qcom_smd_register_edge + */ +int qcom_smd_unregister_edge(struct qcom_smd_edge *edge) +{ + int ret; + + disable_irq(edge->irq); + cancel_work_sync(&edge->scan_work); + cancel_work_sync(&edge->state_work); + + ret = device_for_each_child(&edge->dev, NULL, qcom_smd_remove_device); + if (ret) + dev_warn(&edge->dev, "can't remove smd device: %d\n", ret); + + device_unregister(&edge->dev); + + return 0; +} +EXPORT_SYMBOL(qcom_smd_unregister_edge); + +static int qcom_smd_probe(struct platform_device *pdev) +{ + struct device_node *node; void *p; /* Wait for smem */ @@ -1419,29 +1491,17 @@ static int qcom_smd_probe(struct platform_device *pdev) if (PTR_ERR(p) == -EPROBE_DEFER) return PTR_ERR(p); - num_edges = of_get_available_child_count(pdev->dev.of_node); - array_size = sizeof(*smd) + num_edges * sizeof(struct qcom_smd_edge); - smd = devm_kzalloc(&pdev->dev, array_size, GFP_KERNEL); - if (!smd) - return -ENOMEM; - smd->dev = &pdev->dev; - - smd->num_edges = num_edges; - for_each_available_child_of_node(pdev->dev.of_node, node) { - edge = &smd->edges[i++]; - edge->smd = smd; - init_waitqueue_head(&edge->new_channel_event); - - ret = qcom_smd_parse_edge(&pdev->dev, node, edge); - if (ret) - continue; + for_each_available_child_of_node(pdev->dev.of_node, node) + qcom_smd_register_edge(&pdev->dev, node); - schedule_work(&edge->scan_work); - } + return 0; +} - platform_set_drvdata(pdev, smd); +static int qcom_smd_remove_edge(struct device *dev, void *data) +{ + struct qcom_smd_edge *edge = to_smd_edge(dev); - return 0; + return qcom_smd_unregister_edge(edge); } /* @@ -1450,28 +1510,13 @@ static int qcom_smd_probe(struct platform_device *pdev) */ static int qcom_smd_remove(struct platform_device *pdev) { - struct qcom_smd_channel *channel; - struct qcom_smd_edge *edge; - struct qcom_smd *smd = platform_get_drvdata(pdev); - int i; - - for (i = 0; i < smd->num_edges; i++) { - edge = &smd->edges[i]; - - disable_irq(edge->irq); - cancel_work_sync(&edge->scan_work); - cancel_work_sync(&edge->state_work); - - /* No need to lock here, because the writer is gone */ - list_for_each_entry(channel, &edge->channels, list) { - if (!channel->qsdev) - continue; + int ret; - qcom_smd_destroy_device(channel); - } - } + ret = device_for_each_child(&pdev->dev, NULL, qcom_smd_remove_edge); + if (ret) + dev_warn(&pdev->dev, "can't remove smd device: %d\n", ret); - return 0; + return ret; } static const struct of_device_id qcom_smd_of_match[] = { diff --git a/drivers/soc/qcom/smem.c b/drivers/soc/qcom/smem.c index 2e1aa9f130f4..18ec52f2078a 100644 --- a/drivers/soc/qcom/smem.c +++ b/drivers/soc/qcom/smem.c @@ -740,7 +740,8 @@ static int qcom_smem_probe(struct platform_device *pdev) hwlock_id = of_hwspin_lock_get_id(pdev->dev.of_node, 0); if (hwlock_id < 0) { - dev_err(&pdev->dev, "failed to retrieve hwlock\n"); + if (hwlock_id != -EPROBE_DEFER) + dev_err(&pdev->dev, "failed to retrieve hwlock\n"); return hwlock_id; } diff --git a/drivers/soc/rockchip/pm_domains.c b/drivers/soc/rockchip/pm_domains.c index 44842a205e4b..7acd1517dd37 100644 --- a/drivers/soc/rockchip/pm_domains.c +++ b/drivers/soc/rockchip/pm_domains.c @@ -27,6 +27,7 @@ struct rockchip_domain_info { int req_mask; int idle_mask; int ack_mask; + bool active_wakeup; }; struct rockchip_pmu_info { @@ -75,23 +76,24 @@ struct rockchip_pmu { #define to_rockchip_pd(gpd) container_of(gpd, struct rockchip_pm_domain, genpd) -#define DOMAIN(pwr, status, req, idle, ack) \ +#define DOMAIN(pwr, status, req, idle, ack, wakeup) \ { \ .pwr_mask = (pwr >= 0) ? BIT(pwr) : 0, \ .status_mask = (status >= 0) ? BIT(status) : 0, \ .req_mask = (req >= 0) ? BIT(req) : 0, \ .idle_mask = (idle >= 0) ? BIT(idle) : 0, \ .ack_mask = (ack >= 0) ? BIT(ack) : 0, \ + .active_wakeup = wakeup, \ } -#define DOMAIN_RK3288(pwr, status, req) \ - DOMAIN(pwr, status, req, req, (req) + 16) +#define DOMAIN_RK3288(pwr, status, req, wakeup) \ + DOMAIN(pwr, status, req, req, (req) + 16, wakeup) -#define DOMAIN_RK3368(pwr, status, req) \ - DOMAIN(pwr, status, req, (req) + 16, req) +#define DOMAIN_RK3368(pwr, status, req, wakeup) \ + DOMAIN(pwr, status, req, (req) + 16, req, wakeup) -#define DOMAIN_RK3399(pwr, status, req) \ - DOMAIN(pwr, status, req, req, req) +#define DOMAIN_RK3399(pwr, status, req, wakeup) \ + DOMAIN(pwr, status, req, req, req, wakeup) static bool rockchip_pmu_domain_is_idle(struct rockchip_pm_domain *pd) { @@ -295,6 +297,17 @@ static void rockchip_pd_detach_dev(struct generic_pm_domain *genpd, pm_clk_destroy(dev); } +static bool rockchip_active_wakeup(struct device *dev) +{ + struct generic_pm_domain *genpd; + struct rockchip_pm_domain *pd; + + genpd = pd_to_genpd(dev->pm_domain); + pd = container_of(genpd, struct rockchip_pm_domain, genpd); + + return pd->info->active_wakeup; +} + static int rockchip_pm_add_one_domain(struct rockchip_pmu *pmu, struct device_node *node) { @@ -415,6 +428,7 @@ static int rockchip_pm_add_one_domain(struct rockchip_pmu *pmu, pd->genpd.power_on = rockchip_pd_power_on; pd->genpd.attach_dev = rockchip_pd_attach_dev; pd->genpd.detach_dev = rockchip_pd_detach_dev; + pd->genpd.dev_ops.active_wakeup = rockchip_active_wakeup; pd->genpd.flags = GENPD_FLAG_PM_CLK; pm_genpd_init(&pd->genpd, NULL, false); @@ -623,48 +637,48 @@ err_out: } static const struct rockchip_domain_info rk3288_pm_domains[] = { - [RK3288_PD_VIO] = DOMAIN_RK3288(7, 7, 4), - [RK3288_PD_HEVC] = DOMAIN_RK3288(14, 10, 9), - [RK3288_PD_VIDEO] = DOMAIN_RK3288(8, 8, 3), - [RK3288_PD_GPU] = DOMAIN_RK3288(9, 9, 2), + [RK3288_PD_VIO] = DOMAIN_RK3288(7, 7, 4, false), + [RK3288_PD_HEVC] = DOMAIN_RK3288(14, 10, 9, false), + [RK3288_PD_VIDEO] = DOMAIN_RK3288(8, 8, 3, false), + [RK3288_PD_GPU] = DOMAIN_RK3288(9, 9, 2, false), }; static const struct rockchip_domain_info rk3368_pm_domains[] = { - [RK3368_PD_PERI] = DOMAIN_RK3368(13, 12, 6), - [RK3368_PD_VIO] = DOMAIN_RK3368(15, 14, 8), - [RK3368_PD_VIDEO] = DOMAIN_RK3368(14, 13, 7), - [RK3368_PD_GPU_0] = DOMAIN_RK3368(16, 15, 2), - [RK3368_PD_GPU_1] = DOMAIN_RK3368(17, 16, 2), + [RK3368_PD_PERI] = DOMAIN_RK3368(13, 12, 6, true), + [RK3368_PD_VIO] = DOMAIN_RK3368(15, 14, 8, false), + [RK3368_PD_VIDEO] = DOMAIN_RK3368(14, 13, 7, false), + [RK3368_PD_GPU_0] = DOMAIN_RK3368(16, 15, 2, false), + [RK3368_PD_GPU_1] = DOMAIN_RK3368(17, 16, 2, false), }; static const struct rockchip_domain_info rk3399_pm_domains[] = { - [RK3399_PD_TCPD0] = DOMAIN_RK3399(8, 8, -1), - [RK3399_PD_TCPD1] = DOMAIN_RK3399(9, 9, -1), - [RK3399_PD_CCI] = DOMAIN_RK3399(10, 10, -1), - [RK3399_PD_CCI0] = DOMAIN_RK3399(-1, -1, 15), - [RK3399_PD_CCI1] = DOMAIN_RK3399(-1, -1, 16), - [RK3399_PD_PERILP] = DOMAIN_RK3399(11, 11, 1), - [RK3399_PD_PERIHP] = DOMAIN_RK3399(12, 12, 2), - [RK3399_PD_CENTER] = DOMAIN_RK3399(13, 13, 14), - [RK3399_PD_VIO] = DOMAIN_RK3399(14, 14, 17), - [RK3399_PD_GPU] = DOMAIN_RK3399(15, 15, 0), - [RK3399_PD_VCODEC] = DOMAIN_RK3399(16, 16, 3), - [RK3399_PD_VDU] = DOMAIN_RK3399(17, 17, 4), - [RK3399_PD_RGA] = DOMAIN_RK3399(18, 18, 5), - [RK3399_PD_IEP] = DOMAIN_RK3399(19, 19, 6), - [RK3399_PD_VO] = DOMAIN_RK3399(20, 20, -1), - [RK3399_PD_VOPB] = DOMAIN_RK3399(-1, -1, 7), - [RK3399_PD_VOPL] = DOMAIN_RK3399(-1, -1, 8), - [RK3399_PD_ISP0] = DOMAIN_RK3399(22, 22, 9), - [RK3399_PD_ISP1] = DOMAIN_RK3399(23, 23, 10), - [RK3399_PD_HDCP] = DOMAIN_RK3399(24, 24, 11), - [RK3399_PD_GMAC] = DOMAIN_RK3399(25, 25, 23), - [RK3399_PD_EMMC] = DOMAIN_RK3399(26, 26, 24), - [RK3399_PD_USB3] = DOMAIN_RK3399(27, 27, 12), - [RK3399_PD_EDP] = DOMAIN_RK3399(28, 28, 22), - [RK3399_PD_GIC] = DOMAIN_RK3399(29, 29, 27), - [RK3399_PD_SD] = DOMAIN_RK3399(30, 30, 28), - [RK3399_PD_SDIOAUDIO] = DOMAIN_RK3399(31, 31, 29), + [RK3399_PD_TCPD0] = DOMAIN_RK3399(8, 8, -1, false), + [RK3399_PD_TCPD1] = DOMAIN_RK3399(9, 9, -1, false), + [RK3399_PD_CCI] = DOMAIN_RK3399(10, 10, -1, true), + [RK3399_PD_CCI0] = DOMAIN_RK3399(-1, -1, 15, true), + [RK3399_PD_CCI1] = DOMAIN_RK3399(-1, -1, 16, true), + [RK3399_PD_PERILP] = DOMAIN_RK3399(11, 11, 1, true), + [RK3399_PD_PERIHP] = DOMAIN_RK3399(12, 12, 2, true), + [RK3399_PD_CENTER] = DOMAIN_RK3399(13, 13, 14, true), + [RK3399_PD_VIO] = DOMAIN_RK3399(14, 14, 17, false), + [RK3399_PD_GPU] = DOMAIN_RK3399(15, 15, 0, false), + [RK3399_PD_VCODEC] = DOMAIN_RK3399(16, 16, 3, false), + [RK3399_PD_VDU] = DOMAIN_RK3399(17, 17, 4, false), + [RK3399_PD_RGA] = DOMAIN_RK3399(18, 18, 5, false), + [RK3399_PD_IEP] = DOMAIN_RK3399(19, 19, 6, false), + [RK3399_PD_VO] = DOMAIN_RK3399(20, 20, -1, false), + [RK3399_PD_VOPB] = DOMAIN_RK3399(-1, -1, 7, false), + [RK3399_PD_VOPL] = DOMAIN_RK3399(-1, -1, 8, false), + [RK3399_PD_ISP0] = DOMAIN_RK3399(22, 22, 9, false), + [RK3399_PD_ISP1] = DOMAIN_RK3399(23, 23, 10, false), + [RK3399_PD_HDCP] = DOMAIN_RK3399(24, 24, 11, false), + [RK3399_PD_GMAC] = DOMAIN_RK3399(25, 25, 23, true), + [RK3399_PD_EMMC] = DOMAIN_RK3399(26, 26, 24, true), + [RK3399_PD_USB3] = DOMAIN_RK3399(27, 27, 12, true), + [RK3399_PD_EDP] = DOMAIN_RK3399(28, 28, 22, false), + [RK3399_PD_GIC] = DOMAIN_RK3399(29, 29, 27, true), + [RK3399_PD_SD] = DOMAIN_RK3399(30, 30, 28, true), + [RK3399_PD_SDIOAUDIO] = DOMAIN_RK3399(31, 31, 29, true), }; static const struct rockchip_pmu_info rk3288_pmu = { diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c index 71c834f3847e..7792ed88d80b 100644 --- a/drivers/soc/tegra/pmc.c +++ b/drivers/soc/tegra/pmc.c @@ -967,8 +967,8 @@ static void tegra_io_rail_unprepare(void) int tegra_io_rail_power_on(unsigned int id) { - unsigned long request, status, value; - unsigned int bit, mask; + unsigned long request, status; + unsigned int bit; int err; mutex_lock(&pmc->powergates_lock); @@ -977,15 +977,9 @@ int tegra_io_rail_power_on(unsigned int id) if (err) goto error; - mask = 1 << bit; + tegra_pmc_writel(IO_DPD_REQ_CODE_OFF | BIT(bit), request); - value = tegra_pmc_readl(request); - value |= mask; - value &= ~IO_DPD_REQ_CODE_MASK; - value |= IO_DPD_REQ_CODE_OFF; - tegra_pmc_writel(value, request); - - err = tegra_io_rail_poll(status, mask, 0, 250); + err = tegra_io_rail_poll(status, BIT(bit), 0, 250); if (err) { pr_info("tegra_io_rail_poll() failed: %d\n", err); goto error; @@ -1002,8 +996,8 @@ EXPORT_SYMBOL(tegra_io_rail_power_on); int tegra_io_rail_power_off(unsigned int id) { - unsigned long request, status, value; - unsigned int bit, mask; + unsigned long request, status; + unsigned int bit; int err; mutex_lock(&pmc->powergates_lock); @@ -1014,15 +1008,9 @@ int tegra_io_rail_power_off(unsigned int id) goto error; } - mask = 1 << bit; - - value = tegra_pmc_readl(request); - value |= mask; - value &= ~IO_DPD_REQ_CODE_MASK; - value |= IO_DPD_REQ_CODE_ON; - tegra_pmc_writel(value, request); + tegra_pmc_writel(IO_DPD_REQ_CODE_ON | BIT(bit), request); - err = tegra_io_rail_poll(status, mask, mask, 250); + err = tegra_io_rail_poll(status, BIT(bit), BIT(bit), 250); if (err) goto error; diff --git a/include/dt-bindings/mfd/stm32f4-rcc.h b/include/dt-bindings/mfd/stm32f4-rcc.h new file mode 100644 index 000000000000..e98942dc0d44 --- /dev/null +++ b/include/dt-bindings/mfd/stm32f4-rcc.h @@ -0,0 +1,98 @@ +/* + * This header provides constants for the STM32F4 RCC IP + */ + +#ifndef _DT_BINDINGS_MFD_STM32F4_RCC_H +#define _DT_BINDINGS_MFD_STM32F4_RCC_H + +/* AHB1 */ +#define STM32F4_RCC_AHB1_GPIOA 0 +#define STM32F4_RCC_AHB1_GPIOB 1 +#define STM32F4_RCC_AHB1_GPIOC 2 +#define STM32F4_RCC_AHB1_GPIOD 3 +#define STM32F4_RCC_AHB1_GPIOE 4 +#define STM32F4_RCC_AHB1_GPIOF 5 +#define STM32F4_RCC_AHB1_GPIOG 6 +#define STM32F4_RCC_AHB1_GPIOH 7 +#define STM32F4_RCC_AHB1_GPIOI 8 +#define STM32F4_RCC_AHB1_GPIOJ 9 +#define STM32F4_RCC_AHB1_GPIOK 10 +#define STM32F4_RCC_AHB1_CRC 12 +#define STM32F4_RCC_AHB1_DMA1 21 +#define STM32F4_RCC_AHB1_DMA2 22 +#define STM32F4_RCC_AHB1_DMA2D 23 +#define STM32F4_RCC_AHB1_ETHMAC 25 +#define STM32F4_RCC_AHB1_OTGHS 29 + +#define STM32F4_AHB1_RESET(bit) (STM32F4_RCC_AHB1_##bit + (0x10 * 8)) +#define STM32F4_AHB1_CLOCK(bit) (STM32F4_RCC_AHB1_##bit + (0x30 * 8)) + + +/* AHB2 */ +#define STM32F4_RCC_AHB2_DCMI 0 +#define STM32F4_RCC_AHB2_CRYP 4 +#define STM32F4_RCC_AHB2_HASH 5 +#define STM32F4_RCC_AHB2_RNG 6 +#define STM32F4_RCC_AHB2_OTGFS 7 + +#define STM32F4_AHB2_RESET(bit) (STM32F4_RCC_AHB2_##bit + (0x14 * 8)) +#define STM32F4_AHB2_CLOCK(bit) (STM32F4_RCC_AHB2_##bit + (0x34 * 8)) + +/* AHB3 */ +#define STM32F4_RCC_AHB3_FMC 0 + +#define STM32F4_AHB3_RESET(bit) (STM32F4_RCC_AHB3_##bit + (0x18 * 8)) +#define STM32F4_AHB3_CLOCK(bit) (STM32F4_RCC_AHB3_##bit + (0x38 * 8)) + +/* APB1 */ +#define STM32F4_RCC_APB1_TIM2 0 +#define STM32F4_RCC_APB1_TIM3 1 +#define STM32F4_RCC_APB1_TIM4 2 +#define STM32F4_RCC_APB1_TIM5 3 +#define STM32F4_RCC_APB1_TIM6 4 +#define STM32F4_RCC_APB1_TIM7 5 +#define STM32F4_RCC_APB1_TIM12 6 +#define STM32F4_RCC_APB1_TIM13 7 +#define STM32F4_RCC_APB1_TIM14 8 +#define STM32F4_RCC_APB1_WWDG 11 +#define STM32F4_RCC_APB1_SPI2 14 +#define STM32F4_RCC_APB1_SPI3 15 +#define STM32F4_RCC_APB1_UART2 17 +#define STM32F4_RCC_APB1_UART3 18 +#define STM32F4_RCC_APB1_UART4 19 +#define STM32F4_RCC_APB1_UART5 20 +#define STM32F4_RCC_APB1_I2C1 21 +#define STM32F4_RCC_APB1_I2C2 22 +#define STM32F4_RCC_APB1_I2C3 23 +#define STM32F4_RCC_APB1_CAN1 25 +#define STM32F4_RCC_APB1_CAN2 26 +#define STM32F4_RCC_APB1_PWR 28 +#define STM32F4_RCC_APB1_DAC 29 +#define STM32F4_RCC_APB1_UART7 30 +#define STM32F4_RCC_APB1_UART8 31 + +#define STM32F4_APB1_RESET(bit) (STM32F4_RCC_APB1_##bit + (0x20 * 8)) +#define STM32F4_APB1_CLOCK(bit) (STM32F4_RCC_APB1_##bit + (0x40 * 8)) + +/* APB2 */ +#define STM32F4_RCC_APB2_TIM1 0 +#define STM32F4_RCC_APB2_TIM8 1 +#define STM32F4_RCC_APB2_USART1 4 +#define STM32F4_RCC_APB2_USART6 5 +#define STM32F4_RCC_APB2_ADC 8 +#define STM32F4_RCC_APB2_SDIO 11 +#define STM32F4_RCC_APB2_SPI1 12 +#define STM32F4_RCC_APB2_SPI4 13 +#define STM32F4_RCC_APB2_SYSCFG 14 +#define STM32F4_RCC_APB2_TIM9 16 +#define STM32F4_RCC_APB2_TIM10 17 +#define STM32F4_RCC_APB2_TIM11 18 +#define STM32F4_RCC_APB2_SPI5 20 +#define STM32F4_RCC_APB2_SPI6 21 +#define STM32F4_RCC_APB2_SAI1 22 +#define STM32F4_RCC_APB2_LTDC 26 + +#define STM32F4_APB2_RESET(bit) (STM32F4_RCC_APB2_##bit + (0x24 * 8)) +#define STM32F4_APB2_CLOCK(bit) (STM32F4_RCC_APB2_##bit + (0x44 * 8)) + +#endif /* _DT_BINDINGS_MFD_STM32F4_RCC_H */ diff --git a/include/linux/firmware/meson/meson_sm.h b/include/linux/firmware/meson/meson_sm.h new file mode 100644 index 000000000000..8e953c6f394a --- /dev/null +++ b/include/linux/firmware/meson/meson_sm.h @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2016 Endless Mobile, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef _MESON_SM_FW_H_ +#define _MESON_SM_FW_H_ + +enum { + SM_EFUSE_READ, + SM_EFUSE_WRITE, + SM_EFUSE_USER_MAX, +}; + +struct meson_sm_firmware; + +int meson_sm_call(unsigned int cmd_index, u32 *ret, u32 arg0, u32 arg1, + u32 arg2, u32 arg3, u32 arg4); +int meson_sm_call_write(void *buffer, unsigned int b_size, unsigned int cmd_index, + u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4); +int meson_sm_call_read(void *buffer, unsigned int cmd_index, u32 arg0, u32 arg1, + u32 arg2, u32 arg3, u32 arg4); + +#endif /* _MESON_SM_FW_H_ */ diff --git a/include/linux/omap-gpmc.h b/include/linux/omap-gpmc.h index 9e9d79e8efa5..35d0fd7a4948 100644 --- a/include/linux/omap-gpmc.h +++ b/include/linux/omap-gpmc.h @@ -29,8 +29,8 @@ struct gpmc_nand_regs; struct gpmc_nand_ops *gpmc_omap_get_nand_ops(struct gpmc_nand_regs *regs, int cs); #else -static inline gpmc_nand_ops *gpmc_omap_get_nand_ops(struct gpmc_nand_regs *regs, - int cs) +static inline struct gpmc_nand_ops *gpmc_omap_get_nand_ops(struct gpmc_nand_regs *regs, + int cs) { return NULL; } diff --git a/include/linux/soc/qcom/smd.h b/include/linux/soc/qcom/smd.h index cbb0f06c41b2..f148e0ffbec7 100644 --- a/include/linux/soc/qcom/smd.h +++ b/include/linux/soc/qcom/smd.h @@ -55,11 +55,16 @@ void qcom_smd_driver_unregister(struct qcom_smd_driver *drv); struct qcom_smd_channel *qcom_smd_open_channel(struct qcom_smd_channel *channel, const char *name, qcom_smd_cb_t cb); +void qcom_smd_close_channel(struct qcom_smd_channel *channel); void *qcom_smd_get_drvdata(struct qcom_smd_channel *channel); void qcom_smd_set_drvdata(struct qcom_smd_channel *channel, void *data); int qcom_smd_send(struct qcom_smd_channel *channel, const void *data, int len); +struct qcom_smd_edge *qcom_smd_register_edge(struct device *parent, + struct device_node *node); +int qcom_smd_unregister_edge(struct qcom_smd_edge *edge); + #else static inline int qcom_smd_driver_register(struct qcom_smd_driver *drv) @@ -83,14 +88,20 @@ qcom_smd_open_channel(struct qcom_smd_channel *channel, return NULL; } -void *qcom_smd_get_drvdata(struct qcom_smd_channel *channel) +static inline void qcom_smd_close_channel(struct qcom_smd_channel *channel) +{ + /* This shouldn't be possible */ + WARN_ON(1); +} + +static inline void *qcom_smd_get_drvdata(struct qcom_smd_channel *channel) { /* This shouldn't be possible */ WARN_ON(1); return NULL; } -void qcom_smd_set_drvdata(struct qcom_smd_channel *channel, void *data) +static inline void qcom_smd_set_drvdata(struct qcom_smd_channel *channel, void *data) { /* This shouldn't be possible */ WARN_ON(1); @@ -104,6 +115,20 @@ static inline int qcom_smd_send(struct qcom_smd_channel *channel, return -ENXIO; } +static inline struct qcom_smd_edge * +qcom_smd_register_edge(struct device *parent, + struct device_node *node) +{ + return ERR_PTR(-ENXIO); +} + +static inline int qcom_smd_unregister_edge(struct qcom_smd_edge *edge) +{ + /* This shouldn't be possible */ + WARN_ON(1); + return -ENXIO; +} + #endif #define module_qcom_smd_driver(__smd_driver) \ |