diff options
| -rw-r--r-- | drivers/phy/hisilicon/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/phy/hisilicon/Makefile | 1 | ||||
| -rw-r--r-- | drivers/phy/hisilicon/phy-hisi-inno-usb2.c | 197 |
3 files changed, 208 insertions, 0 deletions
diff --git a/drivers/phy/hisilicon/Kconfig b/drivers/phy/hisilicon/Kconfig index 5458e6c9b230..b40ee54a1a50 100644 --- a/drivers/phy/hisilicon/Kconfig +++ b/drivers/phy/hisilicon/Kconfig @@ -21,6 +21,16 @@ config PHY_HISTB_COMBPHY Enable this to support the HISILICON STB SoCs COMBPHY. If unsure, say N. +config PHY_HISI_INNO_USB2 + tristate "HiSilicon INNO USB2 PHY support" + depends on (ARCH_HISI && ARM64) || COMPILE_TEST + select GENERIC_PHY + select MFD_SYSCON + help + Support for INNO USB2 PHY on HiSilicon SoCs. This Phy supports + USB 1.5Mb/s, USB 12Mb/s, USB 480Mb/s speeds. It supports one + USB host port to accept one USB device. + config PHY_HIX5HD2_SATA tristate "HIX5HD2 SATA PHY Driver" depends on ARCH_HIX5HD2 && OF && HAS_IOMEM diff --git a/drivers/phy/hisilicon/Makefile b/drivers/phy/hisilicon/Makefile index 5e8e2dfa8c37..f662a4fe18d8 100644 --- a/drivers/phy/hisilicon/Makefile +++ b/drivers/phy/hisilicon/Makefile @@ -1,3 +1,4 @@ obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o obj-$(CONFIG_PHY_HISTB_COMBPHY) += phy-histb-combphy.o +obj-$(CONFIG_PHY_HISI_INNO_USB2) += phy-hisi-inno-usb2.o obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o diff --git a/drivers/phy/hisilicon/phy-hisi-inno-usb2.c b/drivers/phy/hisilicon/phy-hisi-inno-usb2.c new file mode 100644 index 000000000000..524381249a2b --- /dev/null +++ b/drivers/phy/hisilicon/phy-hisi-inno-usb2.c @@ -0,0 +1,197 @@ +/* + * HiSilicon INNO USB2 PHY Driver. + * + * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/phy/phy.h> +#include <linux/reset.h> + +#define INNO_PHY_PORT_NUM 2 +#define REF_CLK_STABLE_TIME 100 /* unit:us */ +#define UTMI_CLK_STABLE_TIME 200 /* unit:us */ +#define TEST_CLK_STABLE_TIME 2 /* unit:ms */ +#define PHY_CLK_STABLE_TIME 2 /* unit:ms */ +#define UTMI_RST_COMPLETE_TIME 2 /* unit:ms */ +#define POR_RST_COMPLETE_TIME 300 /* unit:us */ +#define PHY_TEST_DATA GENMASK(7, 0) +#define PHY_TEST_ADDR GENMASK(15, 8) +#define PHY_TEST_PORT GENMASK(18, 16) +#define PHY_TEST_WREN BIT(21) +#define PHY_TEST_CLK BIT(22) /* rising edge active */ +#define PHY_TEST_RST BIT(23) /* low active */ +#define PHY_CLK_ENABLE BIT(2) + +struct hisi_inno_phy_port { + struct reset_control *utmi_rst; + struct hisi_inno_phy_priv *priv; +}; + +struct hisi_inno_phy_priv { + void __iomem *mmio; + struct clk *ref_clk; + struct reset_control *por_rst; + struct hisi_inno_phy_port ports[INNO_PHY_PORT_NUM]; +}; + +static void hisi_inno_phy_write_reg(struct hisi_inno_phy_priv *priv, + u8 port, u32 addr, u32 data) +{ + void __iomem *reg = priv->mmio; + u32 val; + + val = (data & PHY_TEST_DATA) | + ((addr << 8) & PHY_TEST_ADDR) | + ((port << 16) & PHY_TEST_PORT) | + PHY_TEST_WREN | PHY_TEST_RST; + writel(val, reg); + + val |= PHY_TEST_CLK; + writel(val, reg); + + val &= ~PHY_TEST_CLK; + writel(val, reg); +} + +static void hisi_inno_phy_setup(struct hisi_inno_phy_priv *priv) +{ + /* The phy clk is controlled by the port0 register 0x06. */ + hisi_inno_phy_write_reg(priv, 0, 0x06, PHY_CLK_ENABLE); + msleep(PHY_CLK_STABLE_TIME); +} + +static int hisi_inno_phy_init(struct phy *phy) +{ + struct hisi_inno_phy_port *port = phy_get_drvdata(phy); + struct hisi_inno_phy_priv *priv = port->priv; + int ret; + + ret = clk_prepare_enable(priv->ref_clk); + if (ret) + return ret; + udelay(REF_CLK_STABLE_TIME); + + reset_control_deassert(priv->por_rst); + udelay(POR_RST_COMPLETE_TIME); + + /* Set up phy registers */ + hisi_inno_phy_setup(priv); + + reset_control_deassert(port->utmi_rst); + udelay(UTMI_RST_COMPLETE_TIME); + + return 0; +} + +static int hisi_inno_phy_exit(struct phy *phy) +{ + struct hisi_inno_phy_port *port = phy_get_drvdata(phy); + struct hisi_inno_phy_priv *priv = port->priv; + + reset_control_assert(port->utmi_rst); + reset_control_assert(priv->por_rst); + clk_disable_unprepare(priv->ref_clk); + + return 0; +} + +static const struct phy_ops hisi_inno_phy_ops = { + .init = hisi_inno_phy_init, + .exit = hisi_inno_phy_exit, + .owner = THIS_MODULE, +}; + +static int hisi_inno_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct hisi_inno_phy_priv *priv; + struct phy_provider *provider; + struct device_node *child; + struct resource *res; + int i = 0; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->mmio = devm_ioremap_resource(dev, res); + if (IS_ERR(priv->mmio)) { + ret = PTR_ERR(priv->mmio); + return ret; + } + + priv->ref_clk = devm_clk_get(dev, NULL); + if (IS_ERR(priv->ref_clk)) + return PTR_ERR(priv->ref_clk); + + priv->por_rst = devm_reset_control_get_exclusive(dev, NULL); + if (IS_ERR(priv->por_rst)) + return PTR_ERR(priv->por_rst); + + for_each_child_of_node(np, child) { + struct reset_control *rst; + struct phy *phy; + + rst = of_reset_control_get_exclusive(child, NULL); + if (IS_ERR(rst)) + return PTR_ERR(rst); + priv->ports[i].utmi_rst = rst; + priv->ports[i].priv = priv; + + phy = devm_phy_create(dev, child, &hisi_inno_phy_ops); + if (IS_ERR(phy)) + return PTR_ERR(phy); + + phy_set_bus_width(phy, 8); + phy_set_drvdata(phy, &priv->ports[i]); + i++; + + if (i > INNO_PHY_PORT_NUM) { + dev_warn(dev, "Support %d ports in maximum\n", i); + break; + } + } + + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + return PTR_ERR_OR_ZERO(provider); +} + +static const struct of_device_id hisi_inno_phy_of_match[] = { + { .compatible = "hisilicon,inno-usb2-phy", }, + { .compatible = "hisilicon,hi3798cv200-usb2-phy", }, + { }, +}; +MODULE_DEVICE_TABLE(of, hisi_inno_phy_of_match); + +static struct platform_driver hisi_inno_phy_driver = { + .probe = hisi_inno_phy_probe, + .driver = { + .name = "hisi-inno-phy", + .of_match_table = hisi_inno_phy_of_match, + } +}; +module_platform_driver(hisi_inno_phy_driver); + +MODULE_DESCRIPTION("HiSilicon INNO USB2 PHY Driver"); +MODULE_LICENSE("GPL v2"); |