diff options
37 files changed, 1878 insertions, 589 deletions
diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml new file mode 100644 index 000000000000..f761681e4c0d --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/amlogic,thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Thermal + +maintainers: + - Guillaume La Roque <glaroque@baylibre.com> + +description: Binding for Amlogic Thermal + +properties: + compatible: + items: + - enum: + - amlogic,g12a-cpu-thermal + - amlogic,g12a-ddr-thermal + - const: amlogic,g12a-thermal + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + amlogic,ao-secure: + description: phandle to the ao-secure syscon + $ref: '/schemas/types.yaml#/definitions/phandle' + + +required: + - compatible + - reg + - interrupts + - clocks + - amlogic,ao-secure + +examples: + - | + cpu_temp: temperature-sensor@ff634800 { + compatible = "amlogic,g12a-cpu-thermal", + "amlogic,g12a-thermal"; + reg = <0xff634800 0x50>; + interrupts = <0x0 0x24 0x0>; + clocks = <&clk 164>; + #thermal-sensor-cells = <0>; + amlogic,ao-secure = <&sec_AO>; + }; +... diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt deleted file mode 100644 index 673cc1831ee9..000000000000 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt +++ /dev/null @@ -1,55 +0,0 @@ -* QCOM SoC Temperature Sensor (TSENS) - -Required properties: -- compatible: - Must be one of the following: - - "qcom,msm8916-tsens" (MSM8916) - - "qcom,msm8974-tsens" (MSM8974) - - "qcom,msm8996-tsens" (MSM8996) - - "qcom,qcs404-tsens", "qcom,tsens-v1" (QCS404) - - "qcom,msm8998-tsens", "qcom,tsens-v2" (MSM8998) - - "qcom,sdm845-tsens", "qcom,tsens-v2" (SDM845) - The generic "qcom,tsens-v2" property must be used as a fallback for any SoC - with version 2 of the TSENS IP. MSM8996 is the only exception because the - generic property did not exist when support was added. - Similarly, the generic "qcom,tsens-v1" property must be used as a fallback for - any SoC with version 1 of the TSENS IP. - -- reg: Address range of the thermal registers. - New platforms containing v2.x.y of the TSENS IP must specify the SROT and TM - register spaces separately, with order being TM before SROT. - See Example 2, below. - -- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description. -- #qcom,sensors: Number of sensors in tsens block -- Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify -nvmem cells - -Example 1 (legacy support before a fallback tsens-v2 property was introduced): -tsens: thermal-sensor@900000 { - compatible = "qcom,msm8916-tsens"; - reg = <0x4a8000 0x2000>; - nvmem-cells = <&tsens_caldata>, <&tsens_calsel>; - nvmem-cell-names = "caldata", "calsel"; - #thermal-sensor-cells = <1>; - }; - -Example 2 (for any platform containing v2 of the TSENS IP): -tsens0: thermal-sensor@c263000 { - compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; - reg = <0xc263000 0x1ff>, /* TM */ - <0xc222000 0x1ff>; /* SROT */ - #qcom,sensors = <13>; - #thermal-sensor-cells = <1>; - }; - -Example 3 (for any platform containing v1 of the TSENS IP): -tsens: thermal-sensor@4a9000 { - compatible = "qcom,qcs404-tsens", "qcom,tsens-v1"; - reg = <0x004a9000 0x1000>, /* TM */ - <0x004a8000 0x1000>; /* SROT */ - nvmem-cells = <&tsens_caldata>; - nvmem-cell-names = "calib"; - #qcom,sensors = <10>; - #thermal-sensor-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml new file mode 100644 index 000000000000..eef13b9446a8 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -0,0 +1,170 @@ +# SPDX-License-Identifier: (GPL-2.0 OR MIT) +# Copyright 2019 Linaro Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/qcom-tsens.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: QCOM SoC Temperature Sensor (TSENS) + +maintainers: + - Amit Kucheria <amit.kucheria@linaro.org> + +description: | + QCOM SoCs have TSENS IP to allow temperature measurement. There are currently + three distinct major versions of the IP that is supported by a single driver. + The IP versions are named v0.1, v1 and v2 in the driver, where v0.1 captures + everything before v1 when there was no versioning information. + +properties: + compatible: + oneOf: + - description: v0.1 of TSENS + items: + - enum: + - qcom,msm8916-tsens + - qcom,msm8974-tsens + - const: qcom,tsens-v0_1 + + - description: v1 of TSENS + items: + - enum: + - qcom,msm8976-tsens + - qcom,qcs404-tsens + - const: qcom,tsens-v1 + + - description: v2 of TSENS + items: + - enum: + - qcom,msm8996-tsens + - qcom,msm8998-tsens + - qcom,sdm845-tsens + - const: qcom,tsens-v2 + + reg: + maxItems: 2 + items: + - description: TM registers + - description: SROT registers + + nvmem-cells: + minItems: 1 + maxItems: 2 + description: + Reference to an nvmem node for the calibration data + + nvmem-cells-names: + minItems: 1 + maxItems: 2 + items: + - enum: + - caldata + - calsel + + "#qcom,sensors": + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 1 + - maximum: 16 + description: + Number of sensors enabled on this platform + + "#thermal-sensor-cells": + const: 1 + description: + Number of cells required to uniquely identify the thermal sensors. Since + we have multiple sensors this is set to 1 + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8916-tsens + - qcom,msm8974-tsens + - qcom,msm8976-tsens + - qcom,qcs404-tsens + - qcom,tsens-v0_1 + - qcom,tsens-v1 + then: + properties: + interrupts: + items: + - description: Combined interrupt if upper or lower threshold crossed + interrupt-names: + items: + - const: uplow + + else: + properties: + interrupts: + items: + - description: Combined interrupt if upper or lower threshold crossed + - description: Interrupt if critical threshold crossed + interrupt-names: + items: + - const: uplow + - const: critical + +required: + - compatible + - reg + - "#qcom,sensors" + - interrupts + - interrupt-names + - "#thermal-sensor-cells" + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + // Example 1 (legacy: for pre v1 IP): + tsens1: thermal-sensor@900000 { + compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1"; + reg = <0x4a9000 0x1000>, /* TM */ + <0x4a8000 0x1000>; /* SROT */ + + nvmem-cells = <&tsens_caldata>, <&tsens_calsel>; + nvmem-cell-names = "caldata", "calsel"; + + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; + + #qcom,sensors = <5>; + #thermal-sensor-cells = <1>; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + // Example 2 (for any platform containing v1 of the TSENS IP): + tsens2: thermal-sensor@4a9000 { + compatible = "qcom,qcs404-tsens", "qcom,tsens-v1"; + reg = <0x004a9000 0x1000>, /* TM */ + <0x004a8000 0x1000>; /* SROT */ + + nvmem-cells = <&tsens_caldata>; + nvmem-cell-names = "calib"; + + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; + + #qcom,sensors = <10>; + #thermal-sensor-cells = <1>; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + // Example 3 (for any platform containing v2 of the TSENS IP): + tsens3: thermal-sensor@c263000 { + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; + reg = <0xc263000 0x1ff>, + <0xc222000 0x1ff>; + + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + + #qcom,sensors = <13>; + #thermal-sensor-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt index b6ab60f6abbf..12c740b975f7 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt @@ -8,6 +8,7 @@ Required properties: - compatible : "renesas,<soctype>-thermal", Examples with soctypes are: - "renesas,r8a774a1-thermal" (RZ/G2M) + - "renesas,r8a774b1-thermal" (RZ/G2N) - "renesas,r8a7795-thermal" (R-Car H3) - "renesas,r8a7796-thermal" (R-Car M3-W) - "renesas,r8a77965-thermal" (R-Car M3-N) diff --git a/Documentation/driver-api/thermal/sysfs-api.rst b/Documentation/driver-api/thermal/sysfs-api.rst index fab2c9b36d08..b40b1f839148 100644 --- a/Documentation/driver-api/thermal/sysfs-api.rst +++ b/Documentation/driver-api/thermal/sysfs-api.rst @@ -725,24 +725,10 @@ method, the sys I/F structure will be built like this:: |---temp1_input: 37000 |---temp1_crit: 100000 -4. Event Notification +4. Export Symbol APIs ===================== -The framework includes a simple notification mechanism, in the form of a -netlink event. Netlink socket initialization is done during the _init_ -of the framework. Drivers which intend to use the notification mechanism -just need to call thermal_generate_netlink_event() with two arguments viz -(originator, event). The originator is a pointer to struct thermal_zone_device -from where the event has been originated. An integer which represents the -thermal zone device will be used in the message to identify the zone. The -event will be one of:{THERMAL_AUX0, THERMAL_AUX1, THERMAL_CRITICAL, -THERMAL_DEV_FAULT}. Notification can be sent when the current temperature -crosses any of the configured thresholds. - -5. Export Symbol APIs -===================== - -5.1. get_tz_trend +4.1. get_tz_trend ----------------- This function returns the trend of a thermal zone, i.e the rate of change @@ -751,14 +737,14 @@ are supposed to implement the callback. If they don't, the thermal framework calculated the trend by comparing the previous and the current temperature values. -5.2. get_thermal_instance +4.2. get_thermal_instance ------------------------- This function returns the thermal_instance corresponding to a given {thermal_zone, cooling_device, trip_point} combination. Returns NULL if such an instance does not exist. -5.3. thermal_notify_framework +4.3. thermal_notify_framework ----------------------------- This function handles the trip events from sensor drivers. It starts @@ -768,14 +754,14 @@ and does actual throttling for other trip points i.e ACTIVE and PASSIVE. The throttling policy is based on the configured platform data; if no platform data is provided, this uses the step_wise throttling policy. -5.4. thermal_cdev_update +4.4. thermal_cdev_update ------------------------ This function serves as an arbitrator to set the state of a cooling device. It sets the cooling device to the deepest cooling state if possible. -6. thermal_emergency_poweroff +5. thermal_emergency_poweroff ============================= On an event of critical trip temperature crossing. Thermal framework diff --git a/MAINTAINERS b/MAINTAINERS index 061d59a4a80b..ec1565dffa12 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13688,6 +13688,7 @@ L: linux-pm@vger.kernel.org L: linux-arm-msm@vger.kernel.org S: Maintained F: drivers/thermal/qcom/ +F: Documentation/devicetree/bindings/thermal/qcom-tsens.yaml QUALCOMM VENUS VIDEO ACCELERATOR DRIVER M: Stanimir Varbanov <stanimir.varbanov@linaro.org> @@ -16310,6 +16311,15 @@ F: Documentation/driver-api/thermal/cpu-cooling-api.rst F: drivers/thermal/cpu_cooling.c F: include/linux/cpu_cooling.h +THERMAL DRIVER FOR AMLOGIC SOCS +M: Guillaume La Roque <glaroque@baylibre.com> +L: linux-pm@vger.kernel.org +L: linux-amlogic@lists.infradead.org +W: http://linux-meson.com/ +S: Supported +F: drivers/thermal/amlogic_thermal.c +F: Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml + THINKPAD ACPI EXTRAS DRIVER M: Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br> L: ibm-acpi-devel@lists.sourceforge.net diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index c9a867ac32d4..89b4feced426 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -71,6 +71,7 @@ CONFIG_COMPAT=y CONFIG_RANDOMIZE_BASE=y CONFIG_HIBERNATION=y CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y +CONFIG_ENERGY_MODEL=y CONFIG_ARM_CPUIDLE=y CONFIG_ARM_PSCI_CPUIDLE=y CONFIG_CPU_FREQ=y diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c index 2dbbe47e8d4f..7ed313ad6e43 100644 --- a/drivers/clk/qcom/clk-rpmh.c +++ b/drivers/clk/qcom/clk-rpmh.c @@ -500,7 +500,7 @@ static int __init clk_rpmh_init(void) { return platform_driver_register(&clk_rpmh_driver); } -subsys_initcall(clk_rpmh_init); +core_initcall(clk_rpmh_init); static void __exit clk_rpmh_exit(void) { diff --git a/drivers/clk/qcom/gcc-qcs404.c b/drivers/clk/qcom/gcc-qcs404.c index bd32212f37e6..9b0c4ce2ef4e 100644 --- a/drivers/clk/qcom/gcc-qcs404.c +++ b/drivers/clk/qcom/gcc-qcs404.c @@ -2855,7 +2855,7 @@ static int __init gcc_qcs404_init(void) { return platform_driver_register(&gcc_qcs404_driver); } -subsys_initcall(gcc_qcs404_init); +core_initcall(gcc_qcs404_init); static void __exit gcc_qcs404_exit(void) { diff --git a/drivers/clk/qcom/gcc-sdm845.c b/drivers/clk/qcom/gcc-sdm845.c index d2142fe46a8e..f7b370f3acef 100644 --- a/drivers/clk/qcom/gcc-sdm845.c +++ b/drivers/clk/qcom/gcc-sdm845.c @@ -3628,7 +3628,7 @@ static int __init gcc_sdm845_init(void) { return platform_driver_register(&gcc_sdm845_driver); } -subsys_initcall(gcc_sdm845_init); +core_initcall(gcc_sdm845_init); static void __exit gcc_sdm845_exit(void) { diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c index 54bc76743b1f..f1d170dcf4d3 100644 --- a/drivers/cpufreq/cpufreq-dt-platdev.c +++ b/drivers/cpufreq/cpufreq-dt-platdev.c @@ -180,4 +180,4 @@ create_pdev: -1, data, sizeof(struct cpufreq_dt_platform_data))); } -device_initcall(cpufreq_dt_platdev_init); +core_initcall(cpufreq_dt_platdev_init); diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c index b66e81c06a57..737ff3b9c2c0 100644 --- a/drivers/cpufreq/cpufreq_conservative.c +++ b/drivers/cpufreq/cpufreq_conservative.c @@ -346,7 +346,7 @@ struct cpufreq_governor *cpufreq_default_governor(void) return CPU_FREQ_GOV_CONSERVATIVE; } -fs_initcall(cpufreq_gov_dbs_init); +core_initcall(cpufreq_gov_dbs_init); #else module_init(cpufreq_gov_dbs_init); #endif diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c index dced033875bf..82a4d37ddecb 100644 --- a/drivers/cpufreq/cpufreq_ondemand.c +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -483,7 +483,7 @@ struct cpufreq_governor *cpufreq_default_governor(void) return CPU_FREQ_GOV_ONDEMAND; } -fs_initcall(cpufreq_gov_dbs_init); +core_initcall(cpufreq_gov_dbs_init); #else module_init(cpufreq_gov_dbs_init); #endif diff --git a/drivers/cpufreq/cpufreq_performance.c b/drivers/cpufreq/cpufreq_performance.c index aaa04dfcacd9..def9afe0f5b8 100644 --- a/drivers/cpufreq/cpufreq_performance.c +++ b/drivers/cpufreq/cpufreq_performance.c @@ -50,5 +50,5 @@ MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>"); MODULE_DESCRIPTION("CPUfreq policy governor 'performance'"); MODULE_LICENSE("GPL"); -fs_initcall(cpufreq_gov_performance_init); +core_initcall(cpufreq_gov_performance_init); module_exit(cpufreq_gov_performance_exit); diff --git a/drivers/cpufreq/cpufreq_powersave.c b/drivers/cpufreq/cpufreq_powersave.c index c143dc237d87..1ae66019eb83 100644 --- a/drivers/cpufreq/cpufreq_powersave.c +++ b/drivers/cpufreq/cpufreq_powersave.c @@ -43,7 +43,7 @@ struct cpufreq_governor *cpufreq_default_governor(void) return &cpufreq_gov_powersave; } -fs_initcall(cpufreq_gov_powersave_init); +core_initcall(cpufreq_gov_powersave_init); #else module_init(cpufreq_gov_powersave_init); #endif diff --git a/drivers/cpufreq/cpufreq_userspace.c b/drivers/cpufreq/cpufreq_userspace.c index cbd81c58cb8f..b43e7cd502c5 100644 --- a/drivers/cpufreq/cpufreq_userspace.c +++ b/drivers/cpufreq/cpufreq_userspace.c @@ -147,7 +147,7 @@ struct cpufreq_governor *cpufreq_default_governor(void) return &cpufreq_gov_userspace; } -fs_initcall(cpufreq_gov_userspace_init); +core_initcall(cpufreq_gov_userspace_init); #else module_init(cpufreq_gov_userspace_init); #endif diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c index a9ae2f84a4ef..fc92a8842e25 100644 --- a/drivers/cpufreq/qcom-cpufreq-hw.c +++ b/drivers/cpufreq/qcom-cpufreq-hw.c @@ -334,7 +334,7 @@ static int __init qcom_cpufreq_hw_init(void) { return platform_driver_register(&qcom_cpufreq_hw_driver); } -device_initcall(qcom_cpufreq_hw_init); +postcore_initcall(qcom_cpufreq_hw_init); static void __exit qcom_cpufreq_hw_exit(void) { diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 001a21abcc28..59b79fc48266 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -144,6 +144,7 @@ config THERMAL_GOV_USER_SPACE config THERMAL_GOV_POWER_ALLOCATOR bool "Power allocator thermal governor" + depends on ENERGY_MODEL help Enable this to manage platform thermals by dynamically allocating and limiting power to devices. @@ -348,6 +349,17 @@ config MTK_THERMAL Enable this option if you want to have support for thermal management controller present in Mediatek SoCs +config AMLOGIC_THERMAL + tristate "Amlogic Thermal Support" + default ARCH_MESON + depends on OF && ARCH_MESON + help + If you say yes here you get support for Amlogic Thermal + for G12 SoC Family. + + This driver can also be built as a module. If so, the module will + be called amlogic_thermal. + menu "Intel thermal drivers" depends on X86 || X86_INTEL_QUARK || COMPILE_TEST source "drivers/thermal/intel/Kconfig" diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index 74a37c7f847a..baeb70bf0568 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -54,3 +54,4 @@ obj-$(CONFIG_MTK_THERMAL) += mtk_thermal.o obj-$(CONFIG_GENERIC_ADC_THERMAL) += thermal-generic-adc.o obj-$(CONFIG_ZX2967_THERMAL) += zx2967_thermal.o obj-$(CONFIG_UNIPHIER_THERMAL) += uniphier_thermal.o +obj-$(CONFIG_AMLOGIC_THERMAL) += amlogic_thermal.o diff --git a/drivers/thermal/amlogic_thermal.c b/drivers/thermal/amlogic_thermal.c new file mode 100644 index 000000000000..8a9e9bc421c6 --- /dev/null +++ b/drivers/thermal/amlogic_thermal.c @@ -0,0 +1,333 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Amlogic Thermal Sensor Driver + * + * Copyright (C) 2017 Huan Biao <huan.biao@amlogic.com> + * Copyright (C) 2019 Guillaume La Roque <glaroque@baylibre.com> + * + * Register value to celsius temperature formulas: + * Read_Val m * U + * U = ---------, Uptat = --------- + * 2^16 1 + n * U + * + * Temperature = A * ( Uptat + u_efuse / 2^16 )- B + * + * A B m n : calibration parameters + * u_efuse : fused calibration value, it's a signed 16 bits value + */ + +#include <linux/bitfield.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/thermal.h> + +#include "thermal_core.h" + +#define TSENSOR_CFG_REG1 0x4 + #define TSENSOR_CFG_REG1_RSET_VBG BIT(12) + #define TSENSOR_CFG_REG1_RSET_ADC BIT(11) + #define TSENSOR_CFG_REG1_VCM_EN BIT(10) + #define TSENSOR_CFG_REG1_VBG_EN BIT(9) + #define TSENSOR_CFG_REG1_OUT_CTL BIT(6) + #define TSENSOR_CFG_REG1_FILTER_EN BIT(5) + #define TSENSOR_CFG_REG1_DEM_EN BIT(3) + #define TSENSOR_CFG_REG1_CH_SEL GENMASK(1, 0) + #define TSENSOR_CFG_REG1_ENABLE \ + (TSENSOR_CFG_REG1_FILTER_EN | \ + TSENSOR_CFG_REG1_VCM_EN | \ + TSENSOR_CFG_REG1_VBG_EN | \ + TSENSOR_CFG_REG1_DEM_EN | \ + TSENSOR_CFG_REG1_CH_SEL) + +#define TSENSOR_STAT0 0x40 + +#define TSENSOR_STAT9 0x64 + +#define TSENSOR_READ_TEMP_MASK GENMASK(15, 0) +#define TSENSOR_TEMP_MASK GENMASK(11, 0) + +#define TSENSOR_TRIM_SIGN_MASK BIT(15) +#define TSENSOR_TRIM_TEMP_MASK GENMASK(14, 0) +#define TSENSOR_TRIM_VERSION_MASK GENMASK(31, 24) + +#define TSENSOR_TRIM_VERSION(_version) \ + FIELD_GET(TSENSOR_TRIM_VERSION_MASK, _version) + +#define TSENSOR_TRIM_CALIB_VALID_MASK (GENMASK(3, 2) | BIT(7)) + +#define TSENSOR_CALIB_OFFSET 1 +#define TSENSOR_CALIB_SHIFT 4 + +/** + * struct amlogic_thermal_soc_calib_data + * @A, B, m, n: calibration parameters + * This structure is required for configuration of amlogic thermal driver. + */ +struct amlogic_thermal_soc_calib_data { + int A; + int B; + int m; + int n; +}; + +/** + * struct amlogic_thermal_data + * @u_efuse_off: register offset to read fused calibration value + * @calibration_parameters: calibration parameters structure pointer + * @regmap_config: regmap config for the device + * This structure is required for configuration of amlogic thermal driver. + */ +struct amlogic_thermal_data { + int u_efuse_off; + const struct amlogic_thermal_soc_calib_data *calibration_parameters; + const struct regmap_config *regmap_config; +}; + +struct amlogic_thermal { + struct platform_device *pdev; + const struct amlogic_thermal_data *data; + struct regmap *regmap; + struct regmap *sec_ao_map; + struct clk *clk; + struct thermal_zone_device *tzd; + u32 trim_info; +}; + +/* + * Calculate a temperature value from a temperature code. + * The unit of the temperature is degree milliCelsius. + */ +static int amlogic_thermal_code_to_millicelsius(struct amlogic_thermal *pdata, + int temp_code) +{ + const struct amlogic_thermal_soc_calib_data *param = + pdata->data->calibration_parameters; + int temp; + s64 factor, Uptat, uefuse; + + uefuse = pdata->trim_info & TSENSOR_TRIM_SIGN_MASK ? + ~(pdata->trim_info & TSENSOR_TRIM_TEMP_MASK) + 1 : + (pdata->trim_info & TSENSOR_TRIM_TEMP_MASK); + + factor = param->n * temp_code; + factor = div_s64(factor, 100); + + Uptat = temp_code * param->m; + Uptat = div_s64(Uptat, 100); + Uptat = Uptat * BIT(16); + Uptat = div_s64(Uptat, BIT(16) + factor); + + temp = (Uptat + uefuse) * param->A; + temp = div_s64(temp, BIT(16)); + temp = (temp - param->B) * 100; + + return temp; +} + +static int amlogic_thermal_initialize(struct amlogic_thermal *pdata) +{ + int ret = 0; + int ver; + + regmap_read(pdata->sec_ao_map, pdata->data->u_efuse_off, + &pdata->trim_info); + + ver = TSENSOR_TRIM_VERSION(pdata->trim_info); + + if ((ver & TSENSOR_TRIM_CALIB_VALID_MASK) == 0) { + ret = -EINVAL; + dev_err(&pdata->pdev->dev, + "tsensor thermal calibration not supported: 0x%x!\n", + ver); + } + + return ret; +} + +static int amlogic_thermal_enable(struct amlogic_thermal *data) +{ + int ret; + + ret = clk_prepare_enable(data->clk); + if (ret) + return ret; + + regmap_update_bits(data->regmap, TSENSOR_CFG_REG1, + TSENSOR_CFG_REG1_ENABLE, TSENSOR_CFG_REG1_ENABLE); + + return 0; +} + +static int amlogic_thermal_disable(struct amlogic_thermal *data) +{ + regmap_update_bits(data->regmap, TSENSOR_CFG_REG1, + TSENSOR_CFG_REG1_ENABLE, 0); + clk_disable_unprepare(data->clk); + + return 0; +} + +static int amlogic_thermal_get_temp(void *data, int *temp) +{ + unsigned int tval; + struct amlogic_thermal *pdata = data; + + if (!data) + return -EINVAL; + + regmap_read(pdata->regmap, TSENSOR_STAT0, &tval); + *temp = + amlogic_thermal_code_to_millicelsius(pdata, + tval & TSENSOR_READ_TEMP_MASK); + + return 0; +} + +static const struct thermal_zone_of_device_ops amlogic_thermal_ops = { + .get_temp = amlogic_thermal_get_temp, +}; + +static const struct regmap_config amlogic_thermal_regmap_config_g12a = { + .reg_bits = 8, + .val_bits = 32, + .reg_stride = 4, + .max_register = TSENSOR_STAT9, +}; + +static const struct amlogic_thermal_soc_calib_data amlogic_thermal_g12a = { + .A = 9411, + .B = 3159, + .m = 424, + .n = 324, +}; + +static const struct amlogic_thermal_data amlogic_thermal_g12a_cpu_param = { + .u_efuse_off = 0x128, + .calibration_parameters = &amlogic_thermal_g12a, + .regmap_config = &amlogic_thermal_regmap_config_g12a, +}; + +static const struct amlogic_thermal_data amlogic_thermal_g12a_ddr_param = { + .u_efuse_off = 0xf0, + .calibration_parameters = &amlogic_thermal_g12a, + .regmap_config = &amlogic_thermal_regmap_config_g12a, +}; + +static const struct of_device_id of_amlogic_thermal_match[] = { + { + .compatible = "amlogic,g12a-ddr-thermal", + .data = &amlogic_thermal_g12a_ddr_param, + }, + { + .compatible = "amlogic,g12a-cpu-thermal", + .data = &amlogic_thermal_g12a_cpu_param, + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, of_amlogic_thermal_match); + +static int amlogic_thermal_probe(struct platform_device *pdev) +{ + struct amlogic_thermal *pdata; + struct device *dev = &pdev->dev; + void __iomem *base; + int ret; + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + pdata->data = of_device_get_match_data(dev); + pdata->pdev = pdev; + platform_set_drvdata(pdev, pdata); + + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) { + dev_err(dev, "failed to get io address\n"); + return PTR_ERR(base); + } + + pdata->regmap = devm_regmap_init_mmio(dev, base, + pdata->data->regmap_config); + if (IS_ERR(pdata->regmap)) + return PTR_ERR(pdata->regmap); + + pdata->clk = devm_clk_get(dev, NULL); + if (IS_ERR(pdata->clk)) { + if (PTR_ERR(pdata->clk) != -EPROBE_DEFER) + dev_err(dev, "failed to get clock\n"); + return PTR_ERR(pdata->clk); + } + + pdata->sec_ao_map = syscon_regmap_lookup_by_phandle + (pdev->dev.of_node, "amlogic,ao-secure"); + if (IS_ERR(pdata->sec_ao_map)) { + dev_err(dev, "syscon regmap lookup failed.\n"); + return PTR_ERR(pdata->sec_ao_map); + } + + pdata->tzd = devm_thermal_zone_of_sensor_register(&pdev->dev, + 0, + pdata, + &amlogic_thermal_ops); + if (IS_ERR(pdata->tzd)) { + ret = PTR_ERR(pdata->tzd); + dev_err(dev, "Failed to register tsensor: %d\n", ret); + return ret; + } + + ret = amlogic_thermal_initialize(pdata); + if (ret) + return ret; + + ret = amlogic_thermal_enable(pdata); + + return ret; +} + +static int amlogic_thermal_remove(struct platform_device *pdev) +{ + struct amlogic_thermal *data = platform_get_drvdata(pdev); + + return amlogic_thermal_disable(data); +} + +static int __maybe_unused amlogic_thermal_suspend(struct device *dev) +{ + struct amlogic_thermal *data = dev_get_drvdata(dev); + + return amlogic_thermal_disable(data); +} + +static int __maybe_unused amlogic_thermal_resume(struct device *dev) +{ + struct amlogic_thermal *data = dev_get_drvdata(dev); + + return amlogic_thermal_enable(data); +} + +static SIMPLE_DEV_PM_OPS(amlogic_thermal_pm_ops, + amlogic_thermal_suspend, amlogic_thermal_resume); + +static struct platform_driver amlogic_thermal_driver = { + .driver = { + .name = "amlogic_thermal", + .pm = &amlogic_thermal_pm_ops, + .of_match_table = of_amlogic_thermal_match, + }, + .probe = amlogic_thermal_probe, + .remove = amlogic_thermal_remove, +}; + +module_platform_driver(amlogic_thermal_driver); + +MODULE_AUTHOR("Guillaume La Roque <glaroque@baylibre.com>"); +MODULE_DESCRIPTION("Amlogic thermal driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index 6b9865c786ba..52569b27b426 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -20,6 +20,7 @@ #include <linux/slab.h> #include <linux/cpu.h> #include <linux/cpu_cooling.h> +#include <linux/energy_model.h> #include <trace/events/thermal.h> @@ -38,19 +39,6 @@ */ /** - * struct freq_table - frequency table along with power entries - * @frequency: frequency in KHz - * @power: power in mW - * - * This structure is built when the cooling device registers and helps - * in translating frequency to power and vice versa. - */ -struct freq_table { - u32 frequency; - u32 power; -}; - -/** * struct time_in_idle - Idle time stats * @time: previous reading of the absolute time that this cpu was idle * @timestamp: wall time of the last invocation of get_cpu_idle_time_us() @@ -69,7 +57,7 @@ struct time_in_idle { * cooling devices. * @max_level: maximum cooling level. One less than total number of valid * cpufreq frequencies. - * @freq_table: Freq table in descending order of frequencies + * @em: Reference on the Energy Model of the device * @cdev: thermal_cooling_device pointer to keep track of the * registered cooling device. * @policy: cpufreq policy. @@ -84,7 +72,7 @@ struct cpufreq_cooling_device { u32 last_load; unsigned int cpufreq_state; unsigned int max_level; - struct freq_table *freq_table; /* In descending order */ + struct em_perf_domain *em; struct cpufreq_policy *policy; struct list_head node; struct time_in_idle *idle_time; @@ -95,8 +83,7 @@ static DEFINE_IDA(cpufreq_ida); static DEFINE_MUTEX(cooling_list_lock); static LIST_HEAD(cpufreq_cdev_list); -/* Below code defines functions to be used for cpufreq as cooling device */ - +#ifdef CONFIG_THERMAL_GOV_POWER_ALLOCATOR /** * get_level: Find the level for a particular frequency * @cpufreq_cdev: cpufreq_cdev for which the property is required @@ -107,114 +94,40 @@ static LIST_HEAD(cpufreq_cdev_list); static unsigned long get_level(struct cpufreq_cooling_device *cpufreq_cdev, unsigned int freq) { - struct freq_table *freq_table = cpufreq_cdev->freq_table; - unsigned long level; + int i; - for (level = 1; level <= cpufreq_cdev->max_level; level++) - if (freq > freq_table[level].frequency) + for (i = cpufreq_cdev->max_level - 1; i >= 0; i--) { + if (freq > cpufreq_cdev->em->table[i].frequency) break; - - return level - 1; -} - -/** - * update_freq_table() - Update the freq table with power numbers - * @cpufreq_cdev: the cpufreq cooling device in which to update the table - * @capacitance: dynamic power coefficient for these cpus - * - * Update the freq table with power numbers. This table will be used in - * cpu_power_to_freq() and cpu_freq_to_power() to convert between power and - * frequency efficiently. Power is stored in mW, frequency in KHz. The - * resulting table is in descending order. - * - * Return: 0 on success, -EINVAL if there are no OPPs for any CPUs, - * or -ENOMEM if we run out of memory. - */ -static int update_freq_table(struct cpufreq_cooling_device *cpufreq_cdev, - u32 capacitance) -{ - struct freq_table *freq_table = cpufreq_cdev->freq_table; - struct dev_pm_opp *opp; - struct device *dev = NULL; - int num_opps = 0, cpu = cpufreq_cdev->policy->cpu, i; - - dev = get_cpu_device(cpu); - if (unlikely(!dev)) { - pr_warn("No cpu device for cpu %d\n", cpu); - return -ENODEV; } - num_opps = dev_pm_opp_get_opp_count(dev); - if (num_opps < 0) - return num_opps; - - /* - * The cpufreq table is also built from the OPP table and so the count - * should match. - */ - if (num_opps != cpufreq_cdev->max_level + 1) { - dev_warn(dev, "Number of OPPs not matching with max_levels\n"); - return -EINVAL; - } - - for (i = 0; i <= cpufreq_cdev->max_level; i++) { - unsigned long freq = freq_table[i].frequency * 1000; - u32 freq_mhz = freq_table[i].frequency / 1000; - u64 power; - u32 voltage_mv; - - /* - * Find ceil frequency as 'freq' may be slightly lower than OPP - * freq due to truncation while converting to kHz. - */ - opp = dev_pm_opp_find_freq_ceil(dev, &freq); - if (IS_ERR(opp)) { - dev_err(dev, "failed to get opp for %lu frequency\n", - freq); - return -EINVAL; - } - - voltage_mv = dev_pm_opp_get_voltage(opp) / 1000; - dev_pm_opp_put(opp); - - /* - * Do the multiplication with MHz and millivolt so as - * to not overflow. - */ - power = (u64)capacitance * freq_mhz * voltage_mv * voltage_mv; - do_div(power, 1000000000); - - /* power is stored in mW */ - freq_table[i].power = power; - } - - return 0; + return cpufreq_cdev->max_level - i - 1; } static u32 cpu_freq_to_power(struct cpufreq_cooling_device *cpufreq_cdev, u32 freq) { int i; - struct freq_table *freq_table = cpufreq_cdev->freq_table; - for (i = 1; i <= cpufreq_cdev->max_level; i++) - if (freq > freq_table[i].frequency) + for (i = cpufreq_cdev->max_level - 1; i >= 0; i--) { + if (freq > cpufreq_cdev->em->table[i].frequency) break; + } - return freq_table[i - 1].power; + return cpufreq_cdev->em->table[i + 1].power; } static u32 cpu_power_to_freq(struct cpufreq_cooling_device *cpufreq_cdev, u32 power) { int i; - struct freq_table *freq_table = cpufreq_cdev->freq_table; - for (i = 1; i <= cpufreq_cdev->max_level; i++) - if (power > freq_table[i].power) + for (i = cpufreq_cdev->max_level - 1; i >= 0; i--) { + if (power > cpufreq_cdev->em->table[i].power) break; + } - return freq_table[i - 1].frequency; + return cpufreq_cdev->em->table[i + 1].frequency; } /** @@ -265,76 +178,6 @@ static u32 get_dynamic_power(struct cpufreq_cooling_device *cpufreq_cdev, return (raw_cpu_power * cpufreq_cdev->last_load) / 100; } -/* cpufreq cooling device callback functions are defined below */ - -/** - * cpufreq_get_max_state - callback function to get the max cooling state. - * @cdev: thermal cooling device pointer. - * @state: fill this variable with the max cooling state. - * - * Callback for the thermal cooling device to return the cpufreq - * max cooling state. - * - * Return: 0 on success, an error code otherwise. - */ -static int cpufreq_get_max_state(struct thermal_cooling_device *cdev, - unsigned long *state) -{ - struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata; - - *state = cpufreq_cdev->max_level; - return 0; -} - -/** - * cpufreq_get_cur_state - callback function to get the current cooling state. - * @cdev: thermal cooling device pointer. - * @state: fill this variable with the current cooling state. - * - * Callback for the thermal cooling device to return the cpufreq - * current cooling state. - * - * Return: 0 on success, an error code otherwise. - */ -static int cpufreq_get_cur_state(struct thermal_cooling_device *cdev, - unsigned long *state) -{ - struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata; - - *state = cpufreq_cdev->cpufreq_state; - - return 0; -} - -/** - * cpufreq_set_cur_state - callback function to set the current cooling state. - * @cdev: thermal cooling device pointer. - * @state: set this variable to the current cooling state. - * - * Callback for the thermal cooling device to change the cpufreq - * current cooling state. - * - * Return: 0 on success, an error code otherwise. - */ -static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev, - unsigned long state) -{ - struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata; - - /* Request state should be less than max_level */ - if (WARN_ON(state > cpufreq_cdev->max_level)) - return -EINVAL; - - /* Check if the old cooling action is same as new cooling action */ - if (cpufreq_cdev->cpufreq_state == state) - return 0; - - cpufreq_cdev->cpufreq_state = state; - - return freq_qos_update_request(&cpufreq_cdev->qos_req, - cpufreq_cdev->freq_table[state].frequency); -} - /** * cpufreq_get_requested_power() - get the current power * @cdev: &thermal_cooling_device pointer @@ -425,7 +268,7 @@ static int cpufreq_state2power(struct thermal_cooling_device *cdev, struct thermal_zone_device *tz, unsigned long state, u32 *power) { - unsigned int freq, num_cpus; + unsigned int freq, num_cpus, idx; struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata; /* Request state should be less than max_level */ @@ -434,7 +277,8 @@ static int cpufreq_state2power(struct thermal_cooling_device *cdev, num_cpus = cpumask_weight(cpufreq_cdev->policy->cpus); - freq = cpufreq_cdev->freq_table[state].frequency; + idx = cpufreq_cdev->max_level - state; + freq = cpufreq_cdev->em->table[idx].frequency; *power = cpu_freq_to_power(cpufreq_cdev, freq) * num_cpus; return 0; @@ -479,43 +323,142 @@ static int cpufreq_power2state(struct thermal_cooling_device *cdev, return 0; } -/* Bind cpufreq callbacks to thermal cooling device ops */ +static inline bool em_is_sane(struct cpufreq_cooling_device *cpufreq_cdev, + struct em_perf_domain *em) { + struct cpufreq_policy *policy; + unsigned int nr_levels; -static struct thermal_cooling_device_ops cpufreq_cooling_ops = { - .get_max_state = cpufreq_get_max_state, - .get_cur_state = cpufreq_get_cur_state, - .set_cur_state = cpufreq_set_cur_state, -}; + if (!em) + return false; -static struct thermal_cooling_device_ops cpufreq_power_cooling_ops = { - .get_max_state = cpufreq_get_max_state, - .get_cur_state = cpufreq_get_cur_state, - .set_cur_state = cpufreq_set_cur_state, - .get_requested_power = cpufreq_get_requested_power, - .state2power = cpufreq_state2power, - .power2state = cpufreq_power2state, -}; + policy = cpufreq_cdev->policy; + if (!cpumask_equal(policy->related_cpus, to_cpumask(em->cpus))) { + pr_err("The span of pd %*pbl is misaligned with cpufreq policy %*pbl\n", + cpumask_pr_args(to_cpumask(em->cpus)), + cpumask_pr_args(policy->related_cpus)); + return false; + } -static unsigned int find_next_max(struct cpufreq_frequency_table *table, - unsigned int prev_max) + nr_levels = cpufreq_cdev->max_level + 1; + if (em->nr_cap_states != nr_levels) { + pr_err("The number of cap states in pd %*pbl (%u) doesn't match the number of cooling levels (%u)\n", + cpumask_pr_args(to_cpumask(em->cpus)), + em->nr_cap_states, nr_levels); + return false; + } + + return true; +} +#endif /* CONFIG_THERMAL_GOV_POWER_ALLOCATOR */ + +static unsigned int get_state_freq(struct cpufreq_cooling_device *cpufreq_cdev, + unsigned long state) { - struct cpufreq_frequency_table *pos; - unsigned int max = 0; + struct cpufreq_policy *policy; + unsigned long idx; - cpufreq_for_each_valid_entry(pos, table) { - if (pos->frequency > max && pos->frequency < prev_max) - max = pos->frequency; +#ifdef CONFIG_THERMAL_GOV_POWER_ALLOCATOR + /* Use the Energy Model table if available */ + if (cpufreq_cdev->em) { + idx = cpufreq_cdev->max_level - state; + return cpufreq_cdev->em->table[idx].frequency; } +#endif + + /* Otherwise, fallback on the CPUFreq table */ + policy = cpufreq_cdev->policy; + if (policy->freq_table_sorted == CPUFREQ_TABLE_SORTED_ASCENDING) + idx = cpufreq_cdev->max_level - state; + else + idx = state; + + return policy->freq_table[idx].frequency; +} + +/* cpufreq cooling device callback functions are defined below */ + +/** + * cpufreq_get_max_state - callback function to get the max cooling state. + * @cdev: thermal cooling device pointer. + * @state: fill this variable with the max cooling state. + * + * Callback for the thermal cooling device to return the cpufreq + * max cooling state. + * + * Return: 0 on success, an error code otherwise. + */ +static int cpufreq_get_max_state(struct thermal_cooling_device *cdev, + unsigned long *state) +{ + struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata; + + *state = cpufreq_cdev->max_level; + return 0; +} + +/** + * cpufreq_get_cur_state - callback function to get the current cooling state. + * @cdev: thermal cooling device pointer. + * @state: fill this variable with the current cooling state. + * + * Callback for the thermal cooling device to return the cpufreq + * current cooling state. + * + * Return: 0 on success, an error code otherwise. + */ +static int cpufreq_get_cur_state(struct thermal_cooling_device *cdev, + unsigned long *state) +{ + struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata; - return max; + *state = cpufreq_cdev->cpufreq_state; + + return 0; } /** + * cpufreq_set_cur_state - callback function to set the current cooling state. + * @cdev: thermal cooling device pointer. + * @state: set this variable to the current cooling state. + * + * Callback for the thermal cooling device to change the cpufreq + * current cooling state. + * + * Return: 0 on success, an error code otherwise. + */ +static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev, + unsigned long state) +{ + struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata; + + /* Request state should be less than max_level */ + if (WARN_ON(state > cpufreq_cdev->max_level)) + return -EINVAL; + + /* Check if the old cooling action is same as new cooling action */ + if (cpufreq_cdev->cpufreq_state == state) + return 0; + + cpufreq_cdev->cpufreq_state = state; + + return freq_qos_update_request(&cpufreq_cdev->qos_req, + get_state_freq(cpufreq_cdev, state)); +} + +/* Bind cpufreq callbacks to thermal cooling device ops */ + +static struct thermal_cooling_device_ops cpufreq_cooling_ops = { + .get_max_state = cpufreq_get_max_state, + .get_cur_state = cpufreq_get_cur_state, + .set_cur_state = cpufreq_set_cur_state, +}; + +/** * __cpufreq_cooling_register - helper function to create cpufreq cooling device * @np: a valid struct device_node to the cooling device device tree node * @policy: cpufreq policy * Normally this should be same as cpufreq policy->related_cpus. - * @capacitance: dynamic power coefficient for these cpus + * @em: Energy Model of the cpufreq policy * * This interface function registers the cpufreq cooling device with the name * "thermal-cpufreq-%x". This api can support multiple instances of cpufreq @@ -527,12 +470,13 @@ static unsigned int find_next_max(struct cpufreq_frequency_table *table, */ static struct thermal_cooling_device * __cpufreq_cooling_register(struct device_node *np, - struct cpufreq_policy *policy, u32 capacitance) + struct cpufreq_policy *policy, + struct em_perf_domain *em) { struct thermal_cooling_device *cdev; struct cpufreq_cooling_device *cpufreq_cdev; char dev_name[THERMAL_NAME_LENGTH]; - unsigned int freq, i, num_cpus; + unsigned int i, num_cpus; struct device *dev; int ret; struct thermal_cooling_device_ops *cooling_ops; @@ -573,51 +517,36 @@ __cpufreq_cooling_register(struct device_node *np, /* max_level is an index, not a counter */ cpufreq_cdev->max_level = i - 1; - cpufreq_cdev->freq_table = kmalloc_array(i, - sizeof(*cpufreq_cdev->freq_table), - GFP_KERNEL); - if (!cpufreq_cdev->freq_table) { - cdev = ERR_PTR(-ENOMEM); - goto free_idle_time; - } - ret = ida_simple_get(&cpufreq_ida, 0, 0, GFP_KERNEL); if (ret < 0) { cdev = ERR_PTR(ret); - goto free_table; + goto free_idle_time; } cpufreq_cdev->id = ret; snprintf(dev_name, sizeof(dev_name), "thermal-cpufreq-%d", cpufreq_cdev->id); - /* Fill freq-table in descending order of frequencies */ - for (i = 0, freq = -1; i <= cpufreq_cdev->max_level; i++) { - freq = find_next_max(policy->freq_table, freq); - cpufreq_cdev->freq_table[i].frequency = freq; - - /* Warn for duplicate entries */ - if (!freq) - pr_warn("%s: table has duplicate entries\n", __func__); - else - pr_debug("%s: freq:%u KHz\n", __func__, freq); - } - - if (capacitance) { - ret = update_freq_table(cpufreq_cdev, capacitance); - if (ret) { - cdev = ERR_PTR(ret); - goto remove_ida; - } - - cooling_ops = &cpufreq_power_cooling_ops; - } else { - cooling_ops = &cpufreq_cooling_ops; + cooling_ops = &cpufreq_cooling_ops; + +#ifdef CONFIG_THERMAL_GOV_POWER_ALLOCATOR + if (em_is_sane(cpufreq_cdev, em)) { + cpufreq_cdev->em = em; + cooling_ops->get_requested_power = cpufreq_get_requested_power; + cooling_ops->state2power = cpufreq_state2power; + cooling_ops->power2state = cpufreq_power2state; + } else +#endif + if (policy->freq_table_sorted == CPUFREQ_TABLE_UNSORTED) { + pr_err("%s: unsorted frequency tables are not supported\n", + __func__); + cdev = ERR_PTR(-EINVAL); + goto remove_ida; } ret = freq_qos_add_request(&policy->constraints, &cpufreq_cdev->qos_req, FREQ_QOS_MAX, - cpufreq_cdev->freq_table[0].frequency); + get_state_freq(cpufreq_cdev, 0)); if (ret < 0) { pr_err("%s: Failed to add freq constraint (%d)\n", __func__, ret); @@ -640,8 +569,6 @@ remove_qos_req: freq_qos_remove_request(&cpufreq_cdev->qos_req); remove_ida: ida_simple_remove(&cpufreq_ida, cpufreq_cdev->id); -free_table: - kfree(cpufreq_cdev->freq_table); free_idle_time: kfree(cpufreq_cdev->idle_time); free_cdev: @@ -663,7 +590,7 @@ free_cdev: struct thermal_cooling_device * cpufreq_cooling_register(struct cpufreq_policy *policy) { - return __cpufreq_cooling_register(NULL, policy, 0); + return __cpufreq_cooling_register(NULL, policy, NULL); } EXPORT_SYMBOL_GPL(cpufreq_cooling_register); @@ -691,7 +618,6 @@ of_cpufreq_cooling_register(struct cpufreq_policy *policy) { struct device_node *np = of_get_cpu_node(policy->cpu, NULL); struct thermal_cooling_device *cdev = NULL; - u32 capacitance = 0; if (!np) { pr_err("cpu_cooling: OF node not available for cpu%d\n", @@ -700,10 +626,9 @@ of_cpufreq_cooling_register(struct cpufreq_policy *policy) } if (of_find_property(np, "#cooling-cells", NULL)) { - of_property_read_u32(np, "dynamic-power-coefficient", - &capacitance); + struct em_perf_domain *em = em_cpu_get(policy->cpu); - cdev = __cpufreq_cooling_register(np, policy, capacitance); + cdev = __cpufreq_cooling_register(np, policy, em); if (IS_ERR(cdev)) { pr_err("cpu_cooling: cpu%d failed to register as cooling device: %ld\n", policy->cpu, PTR_ERR(cdev)); @@ -739,7 +664,6 @@ void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) freq_qos_remove_request(&cpufreq_cdev->qos_req); ida_simple_remove(&cpufreq_ida, cpufreq_cdev->id); kfree(cpufreq_cdev->idle_time); - kfree(cpufreq_cdev->freq_table); kfree(cpufreq_cdev); } EXPORT_SYMBOL_GPL(cpufreq_cooling_unregister); diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c index e46a4e3f25c4..fb77acb8d13b 100644 --- a/drivers/thermal/qcom/tsens-8960.c +++ b/drivers/thermal/qcom/tsens-8960.c @@ -245,11 +245,11 @@ static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s) return adc_code * slope + offset; } -static int get_temp_8960(struct tsens_priv *priv, int id, int *temp) +static int get_temp_8960(struct tsens_sensor *s, int *temp) { int ret; u32 code, trdy; - const struct tsens_sensor *s = &priv->sensor[id]; + struct tsens_priv *priv = s->priv; unsigned long timeout; timeout = jiffies + usecs_to_jiffies(TIMEOUT_US); diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c index 528df8801254..c8d57ee0a5bb 100644 --- a/drivers/thermal/qcom/tsens-common.c +++ b/drivers/thermal/qcom/tsens-common.c @@ -3,6 +3,7 @@ * Copyright (c) 2015, The Linux Foundation. All rights reserved. */ +#include <linux/debugfs.h> #include <linux/err.h> #include <linux/io.h> #include <linux/nvmem-consumer.h> @@ -12,6 +13,31 @@ #include <linux/regmap.h> #include "tsens.h" +/** + * struct tsens_irq_data - IRQ status and temperature violations + * @up_viol: upper threshold violated + * @up_thresh: upper threshold temperature value + * @up_irq_mask: mask register for upper threshold irqs + * @up_irq_clear: clear register for uppper threshold irqs + * @low_viol: lower threshold violated + * @low_thresh: lower threshold temperature value + * @low_irq_mask: mask register for lower threshold irqs + * @low_irq_clear: clear register for lower threshold irqs + * + * Structure containing data about temperature threshold settings and + * irq status if they were violated. + */ +struct tsens_irq_data { + u32 up_viol; + int up_thresh; + u32 up_irq_mask; + u32 up_irq_clear; + u32 low_viol; + int low_thresh; + u32 low_irq_mask; + u32 low_irq_clear; +}; + char *qfprom_read(struct device *dev, const char *cname) { struct nvmem_cell *cell; @@ -42,8 +68,8 @@ void compute_intercept_slope(struct tsens_priv *priv, u32 *p1, for (i = 0; i < priv->num_sensors; i++) { dev_dbg(priv->dev, - "sensor%d - data_point1:%#x data_point2:%#x\n", - i, p1[i], p2[i]); + "%s: sensor%d - data_point1:%#x data_point2:%#x\n", + __func__, i, p1[i], p2[i]); priv->sensor[i].slope = SLOPE_DEFAULT; if (mode == TWO_PT_CALIB) { @@ -60,10 +86,18 @@ void compute_intercept_slope(struct tsens_priv *priv, u32 *p1, priv->sensor[i].offset = (p1[i] * SLOPE_FACTOR) - (CAL_DEGC_PT1 * priv->sensor[i].slope); - dev_dbg(priv->dev, "offset:%d\n", priv->sensor[i].offset); + dev_dbg(priv->dev, "%s: offset:%d\n", __func__, priv->sensor[i].offset); } } +static inline u32 degc_to_code(int degc, const struct tsens_sensor *s) +{ + u64 code = div_u64(((u64)degc * s->slope + s->offset), SLOPE_FACTOR); + + pr_debug("%s: raw_code: 0x%llx, degc:%d\n", __func__, code, degc); + return clamp_val(code, THRESHOLD_MIN_ADC_CODE, THRESHOLD_MAX_ADC_CODE); +} + static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s) { int degc, num, den; @@ -83,12 +117,353 @@ static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s) return degc; } -int get_temp_tsens_valid(struct tsens_priv *priv, int i, int *temp) +/** + * tsens_hw_to_mC - Return sign-extended temperature in mCelsius. + * @s: Pointer to sensor struct + * @field: Index into regmap_field array pointing to temperature data + * + * This function handles temperature returned in ADC code or deciCelsius + * depending on IP version. + * + * Return: Temperature in milliCelsius on success, a negative errno will + * be returned in error cases + */ +static int tsens_hw_to_mC(struct tsens_sensor *s, int field) +{ + struct tsens_priv *priv = s->priv; + u32 resolution; + u32 temp = 0; + int ret; + + resolution = priv->fields[LAST_TEMP_0].msb - + priv->fields[LAST_TEMP_0].lsb; + + ret = regmap_field_read(priv->rf[field], &temp); + if (ret) + return ret; + + /* Convert temperature from ADC code to milliCelsius */ + if (priv->feat->adc) + return code_to_degc(temp, s) * 1000; + + /* deciCelsius -> milliCelsius along with sign extension */ + return sign_extend32(temp, resolution) * 100; +} + +/** + * tsens_mC_to_hw - Convert temperature to hardware register value + * @s: Pointer to sensor struct + * @temp: temperature in milliCelsius to be programmed to hardware + * + * This function outputs the value to be written to hardware in ADC code + * or deciCelsius depending on IP version. + * + * Return: ADC code or temperature in deciCelsius. + */ +static int tsens_mC_to_hw(struct tsens_sensor *s, int temp) +{ + struct tsens_priv *priv = s->priv; + + /* milliC to adc code */ + if (priv->feat->adc) + return degc_to_code(temp / 1000, s); + + /* milliC to deciC */ + return temp / 100; +} + +static inline enum tsens_ver tsens_version(struct tsens_priv *priv) +{ + return priv->feat->ver_major; +} + +static void tsens_set_interrupt_v1(struct tsens_priv *priv, u32 hw_id, + enum tsens_irq_type irq_type, bool enable) +{ + u32 index = 0; + + switch (irq_type) { + case UPPER: + index = UP_INT_CLEAR_0 + hw_id; + break; + case LOWER: + index = LOW_INT_CLEAR_0 + hw_id; + break; + } + regmap_field_write(priv->rf[index], enable ? 0 : 1); +} + +static void tsens_set_interrupt_v2(struct tsens_priv *priv, u32 hw_id, + enum tsens_irq_type irq_type, bool enable) +{ + u32 index_mask = 0, index_clear = 0; + + /* + * To enable the interrupt flag for a sensor: + * - clear the mask bit + * To disable the interrupt flag for a sensor: + * - Mask further interrupts for this sensor + * - Write 1 followed by 0 to clear the interrupt + */ + switch (irq_type) { + case UPPER: + index_mask = UP_INT_MASK_0 + hw_id; + index_clear = UP_INT_CLEAR_0 + hw_id; + break; + case LOWER: + index_mask = LOW_INT_MASK_0 + hw_id; + index_clear = LOW_INT_CLEAR_0 + hw_id; + break; + } + + if (enable) { + regmap_field_write(priv->rf[index_mask], 0); + } else { + regmap_field_write(priv->rf[index_mask], 1); + regmap_field_write(priv->rf[index_clear], 1); + regmap_field_write(priv->rf[index_clear], 0); + } +} + +/** + * tsens_set_interrupt - Set state of an interrupt + * @priv: Pointer to tsens controller private data + * @hw_id: Hardware ID aka. sensor number + * @irq_type: irq_type from enum tsens_irq_type + * @enable: false = disable, true = enable + * + * Call IP-specific function to set state of an interrupt + * + * Return: void + */ +static void tsens_set_interrupt(struct tsens_priv *priv, u32 hw_id, + enum tsens_irq_type irq_type, bool enable) +{ + dev_dbg(priv->dev, "[%u] %s: %s -> %s\n", hw_id, __func__, + irq_type ? ((irq_type == 1) ? "UP" : "CRITICAL") : "LOW", + enable ? "en" : "dis"); + if (tsens_version(priv) > VER_1_X) + tsens_set_interrupt_v2(priv, hw_id, irq_type, enable); + else + tsens_set_interrupt_v1(priv, hw_id, irq_type, enable); +} + +/** + * tsens_threshold_violated - Check if a sensor temperature violated a preset threshold + * @priv: Pointer to tsens controller private data + * @hw_id: Hardware ID aka. sensor number + * @d: Pointer to irq state data + * + * Return: 0 if threshold was not violated, 1 if it was violated and negative + * errno in case of errors + */ +static int tsens_threshold_violated(struct tsens_priv *priv, u32 hw_id, + struct tsens_irq_data *d) { - struct tsens_sensor *s = &priv->sensor[i]; - u32 temp_idx = LAST_TEMP_0 + s->hw_id; - u32 valid_idx = VALID_0 + s->hw_id; - u32 last_temp = 0, valid, mask; + int ret; + + ret = regmap_field_read(priv->rf[UPPER_STATUS_0 + hw_id], &d->up_viol); + if (ret) + return ret; + ret = regmap_field_read(priv->rf[LOWER_STATUS_0 + hw_id], &d->low_viol); + if (ret) + return ret; + if (d->up_viol || d->low_viol) + return 1; + + return 0; +} + +static int tsens_read_irq_state(struct tsens_priv *priv, u32 hw_id, + struct tsens_sensor *s, struct tsens_irq_data *d) +{ + int ret; + + ret = regmap_field_read(priv->rf[UP_INT_CLEAR_0 + hw_id], &d->up_irq_clear); + if (ret) + return ret; + ret = regmap_field_read(priv->rf[LOW_INT_CLEAR_0 + hw_id], &d->low_irq_clear); + if (ret) + return ret; + if (tsens_version(priv) > VER_1_X) { + ret = regmap_field_read(priv->rf[UP_INT_MASK_0 + hw_id], &d->up_irq_mask); + if (ret) + return ret; + ret = regmap_field_read(priv->rf[LOW_INT_MASK_0 + hw_id], &d->low_irq_mask); + if (ret) + return ret; + } else { + /* No mask register on older TSENS */ + d->up_irq_mask = 0; + d->low_irq_mask = 0; + } + + d->up_thresh = tsens_hw_to_mC(s, UP_THRESH_0 + hw_id); + d->low_thresh = tsens_hw_to_mC(s, LOW_THRESH_0 + hw_id); + + dev_dbg(priv->dev, "[%u] %s%s: status(%u|%u) | clr(%u|%u) | mask(%u|%u)\n", + hw_id, __func__, (d->up_viol || d->low_viol) ? "(V)" : "", + d->low_viol, d->up_viol, d->low_irq_clear, d->up_irq_clear, + d->low_irq_mask, d->up_irq_mask); + dev_dbg(priv->dev, "[%u] %s%s: thresh: (%d:%d)\n", hw_id, __func__, + (d->up_viol || d->low_viol) ? "(violation)" : "", + d->low_thresh, d->up_thresh); + + return 0; +} + +static inline u32 masked_irq(u32 hw_id, u32 mask, enum tsens_ver ver) +{ + if (ver > VER_1_X) + return mask & (1 << hw_id); + + /* v1, v0.1 don't have a irq mask register */ + return 0; +} + +/** + * tsens_irq_thread - Threaded interrupt handler for uplow interrupts + * @irq: irq number + * @data: tsens controller private data + * + * Check all sensors to find ones that violated their threshold limits. If the + * temperature is still outside the limits, call thermal_zone_device_update() to + * update the thresholds, else re-enable the interrupts. + * + * The level-triggered interrupt might deassert if the temperature returned to + * within the threshold limits by the time the handler got scheduled. We + * consider the irq to have been handled in that case. + * + * Return: IRQ_HANDLED + */ +irqreturn_t tsens_irq_thread(int irq, void *data) +{ + struct tsens_priv *priv = data; + struct tsens_irq_data d; + bool enable = true, disable = false; + unsigned long flags; + int temp, ret, i; + + for (i = 0; i < priv->num_sensors; i++) { + bool trigger = false; + struct tsens_sensor *s = &priv->sensor[i]; + u32 hw_id = s->hw_id; + + if (IS_ERR(priv->sensor[i].tzd)) + continue; + if (!tsens_threshold_violated(priv, hw_id, &d)) + continue; + ret = get_temp_tsens_valid(s, &temp); + if (ret) { + dev_err(priv->dev, "[%u] %s: error reading sensor\n", hw_id, __func__); + continue; + } + + spin_lock_irqsave(&priv->ul_lock, flags); + + tsens_read_irq_state(priv, hw_id, s, &d); + + if (d.up_viol && + !masked_irq(hw_id, d.up_irq_mask, tsens_version(priv))) { + tsens_set_interrupt(priv, hw_id, UPPER, disable); + if (d.up_thresh > temp) { + dev_dbg(priv->dev, "[%u] %s: re-arm upper\n", + priv->sensor[i].hw_id, __func__); + tsens_set_interrupt(priv, hw_id, UPPER, enable); + } else { + trigger = true; + /* Keep irq masked */ + } + } else if (d.low_viol && + !masked_irq(hw_id, d.low_irq_mask, tsens_version(priv))) { + tsens_set_interrupt(priv, hw_id, LOWER, disable); + if (d.low_thresh < temp) { + dev_dbg(priv->dev, "[%u] %s: re-arm low\n", + priv->sensor[i].hw_id, __func__); + tsens_set_interrupt(priv, hw_id, LOWER, enable); + } else { + trigger = true; + /* Keep irq masked */ + } + } + + spin_unlock_irqrestore(&priv->ul_lock, flags); + + if (trigger) { + dev_dbg(priv->dev, "[%u] %s: TZ update trigger (%d mC)\n", + hw_id, __func__, temp); + thermal_zone_device_update(priv->sensor[i].tzd, + THERMAL_EVENT_UNSPECIFIED); + } else { + dev_dbg(priv->dev, "[%u] %s: no violation: %d\n", + hw_id, __func__, temp); + } + } + + return IRQ_HANDLED; +} + +int tsens_set_trips(void *_sensor, int low, int high) +{ + struct tsens_sensor *s = _sensor; + struct tsens_priv *priv = s->priv; + struct device *dev = priv->dev; + struct tsens_irq_data d; + unsigned long flags; + int high_val, low_val, cl_high, cl_low; + u32 hw_id = s->hw_id; + + dev_dbg(dev, "[%u] %s: proposed thresholds: (%d:%d)\n", + hw_id, __func__, low, high); + + cl_high = clamp_val(high, -40000, 120000); + cl_low = clamp_val(low, -40000, 120000); + + high_val = tsens_mC_to_hw(s, cl_high); + low_val = tsens_mC_to_hw(s, cl_low); + + spin_lock_irqsave(&priv->ul_lock, flags); + + tsens_read_irq_state(priv, hw_id, s, &d); + + /* Write the new thresholds and clear the status */ + regmap_field_write(priv->rf[LOW_THRESH_0 + hw_id], low_val); + regmap_field_write(priv->rf[UP_THRESH_0 + hw_id], high_val); + tsens_set_interrupt(priv, hw_id, LOWER, true); + tsens_set_interrupt(priv, hw_id, UPPER, true); + + spin_unlock_irqrestore(&priv->ul_lock, flags); + + dev_dbg(dev, "[%u] %s: (%d:%d)->(%d:%d)\n", + s->hw_id, __func__, d.low_thresh, d.up_thresh, cl_low, cl_high); + + return 0; +} + +int tsens_enable_irq(struct tsens_priv *priv) +{ + int ret; + int val = tsens_version(priv) > VER_1_X ? 7 : 1; + + ret = regmap_field_write(priv->rf[INT_EN], val); + if (ret < 0) + dev_err(priv->dev, "%s: failed to enable interrupts\n", __func__); + + return ret; +} + +void tsens_disable_irq(struct tsens_priv *priv) +{ + regmap_field_write(priv->rf[INT_EN], 0); +} + +int get_temp_tsens_valid(struct tsens_sensor *s, int *temp) +{ + struct tsens_priv *priv = s->priv; + int hw_id = s->hw_id; + u32 temp_idx = LAST_TEMP_0 + hw_id; + u32 valid_idx = VALID_0 + hw_id; + u32 valid; int ret; ret = regmap_field_read(priv->rf[valid_idx], &valid); @@ -106,29 +481,18 @@ int get_temp_tsens_valid(struct tsens_priv *priv, int i, int *temp) } /* Valid bit is set, OK to read the temperature */ - ret = regmap_field_read(priv->rf[temp_idx], &last_temp); - if (ret) - return ret; - - if (priv->feat->adc) { - /* Convert temperature from ADC code to milliCelsius */ - *temp = code_to_degc(last_temp, s) * 1000; - } else { - mask = GENMASK(priv->fields[LAST_TEMP_0].msb, - priv->fields[LAST_TEMP_0].lsb); - /* Convert temperature from deciCelsius to milliCelsius */ - *temp = sign_extend32(last_temp, fls(mask) - 1) * 100; - } + *temp = tsens_hw_to_mC(s, temp_idx); return 0; } -int get_temp_common(struct tsens_priv *priv, int i, int *temp) +int get_temp_common(struct tsens_sensor *s, int *temp) { - struct tsens_sensor *s = &priv->sensor[i]; + struct tsens_priv *priv = s->priv; + int hw_id = s->hw_id; int last_temp = 0, ret; - ret = regmap_field_read(priv->rf[LAST_TEMP_0 + s->hw_id], &last_temp); + ret = regmap_field_read(priv->rf[LAST_TEMP_0 + hw_id], &last_temp); if (ret) return ret; @@ -137,6 +501,77 @@ int get_temp_common(struct tsens_priv *priv, int i, int *temp) return 0; } +#ifdef CONFIG_DEBUG_FS +static int dbg_sensors_show(struct seq_file *s, void *data) +{ + struct platform_device *pdev = s->private; + struct tsens_priv *priv = platform_get_drvdata(pdev); + int i; + + seq_printf(s, "max: %2d\nnum: %2d\n\n", + priv->feat->max_sensors, priv->num_sensors); + + seq_puts(s, " id slope offset\n--------------------------\n"); + for (i = 0; i < priv->num_sensors; i++) { + seq_printf(s, "%8d %8d %8d\n", priv->sensor[i].hw_id, + priv->sensor[i].slope, priv->sensor[i].offset); + } + + return 0; +} + +static int dbg_version_show(struct seq_file *s, void *data) +{ + struct platform_device *pdev = s->private; + struct tsens_priv *priv = platform_get_drvdata(pdev); + u32 maj_ver, min_ver, step_ver; + int ret; + + if (tsens_version(priv) > VER_0_1) { + ret = regmap_field_read(priv->rf[VER_MAJOR], &maj_ver); + if (ret) + return ret; + ret = regmap_field_read(priv->rf[VER_MINOR], &min_ver); + if (ret) + return ret; + ret = regmap_field_read(priv->rf[VER_STEP], &step_ver); + if (ret) + return ret; + seq_printf(s, "%d.%d.%d\n", maj_ver, min_ver, step_ver); + } else { + seq_puts(s, "0.1.0\n"); + } + + return 0; +} + +DEFINE_SHOW_ATTRIBUTE(dbg_version); +DEFINE_SHOW_ATTRIBUTE(dbg_sensors); + +static void tsens_debug_init(struct platform_device *pdev) +{ + struct tsens_priv *priv = platform_get_drvdata(pdev); + struct dentry *root, *file; + + root = debugfs_lookup("tsens", NULL); + if (!root) + priv->debug_root = debugfs_create_dir("tsens", NULL); + else + priv->debug_root = root; + + file = debugfs_lookup("version", priv->debug_root); + if (!file) + debugfs_create_file("version", 0444, priv->debug_root, + pdev, &dbg_version_fops); + + /* A directory for each instance of the TSENS IP */ + priv->debug = debugfs_create_dir(dev_name(&pdev->dev), priv->debug_root); + debugfs_create_file("sensors", 0444, priv->debug, pdev, &dbg_sensors_fops); +} +#else +static inline void tsens_debug_init(struct platform_device *pdev) {} +#endif + static const struct regmap_config tsens_config = { .name = "tm", .reg_bits = 32, @@ -197,6 +632,15 @@ int __init init_common(struct tsens_priv *priv) goto err_put_device; } + if (tsens_version(priv) > VER_0_1) { + for (i = VER_MAJOR; i <= VER_STEP; i++) { + priv->rf[i] = devm_regmap_field_alloc(dev, priv->srot_map, + priv->fields[i]); + if (IS_ERR(priv->rf[i])) + return PTR_ERR(priv->rf[i]); + } + } + priv->rf[TSENS_EN] = devm_regmap_field_alloc(dev, priv->srot_map, priv->fields[TSENS_EN]); if (IS_ERR(priv->rf[TSENS_EN])) { @@ -207,7 +651,7 @@ int __init init_common(struct tsens_priv *priv) if (ret) goto err_put_device; if (!enabled) { - dev_err(dev, "tsens device is not enabled\n"); + dev_err(dev, "%s: device not enabled\n", __func__); ret = -ENODEV; goto err_put_device; } @@ -218,24 +662,31 @@ int __init init_common(struct tsens_priv *priv) ret = PTR_ERR(priv->rf[SENSOR_EN]); goto err_put_device; } - /* now alloc regmap_fields in tm_map */ - for (i = 0, j = LAST_TEMP_0; i < priv->feat->max_sensors; i++, j++) { - priv->rf[j] = devm_regmap_field_alloc(dev, priv->tm_map, - priv->fields[j]); - if (IS_ERR(priv->rf[j])) { - ret = PTR_ERR(priv->rf[j]); - goto err_put_device; - } + priv->rf[INT_EN] = devm_regmap_field_alloc(dev, priv->tm_map, + priv->fields[INT_EN]); + if (IS_ERR(priv->rf[INT_EN])) { + ret = PTR_ERR(priv->rf[INT_EN]); + goto err_put_device; } - for (i = 0, j = VALID_0; i < priv->feat->max_sensors; i++, j++) { - priv->rf[j] = devm_regmap_field_alloc(dev, priv->tm_map, - priv->fields[j]); - if (IS_ERR(priv->rf[j])) { - ret = PTR_ERR(priv->rf[j]); - goto err_put_device; + + /* This loop might need changes if enum regfield_ids is reordered */ + for (j = LAST_TEMP_0; j <= UP_THRESH_15; j += 16) { + for (i = 0; i < priv->feat->max_sensors; i++) { + int idx = j + i; + + priv->rf[idx] = devm_regmap_field_alloc(dev, priv->tm_map, + priv->fields[idx]); + if (IS_ERR(priv->rf[idx])) { + ret = PTR_ERR(priv->rf[idx]); + goto err_put_device; + } } } + spin_lock_init(&priv->ul_lock); + tsens_enable_irq(priv); + tsens_debug_init(op); + return 0; err_put_device: diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c index 055647bcee67..4b8dd6de02ce 100644 --- a/drivers/thermal/qcom/tsens-v0_1.c +++ b/drivers/thermal/qcom/tsens-v0_1.c @@ -347,9 +347,20 @@ static const struct reg_field tsens_v0_1_regfields[MAX_REGFIELDS] = { /* INTERRUPT ENABLE */ [INT_EN] = REG_FIELD(TM_INT_EN_OFF, 0, 0), + /* UPPER/LOWER TEMPERATURE THRESHOLDS */ + REG_FIELD_FOR_EACH_SENSOR11(LOW_THRESH, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 0, 9), + REG_FIELD_FOR_EACH_SENSOR11(UP_THRESH, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 10, 19), + + /* UPPER/LOWER INTERRUPTS [CLEAR/STATUS] */ + REG_FIELD_FOR_EACH_SENSOR11(LOW_INT_CLEAR, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 20, 20), + REG_FIELD_FOR_EACH_SENSOR11(UP_INT_CLEAR, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 21, 21), + + /* NO CRITICAL INTERRUPT SUPPORT on v0.1 */ + /* Sn_STATUS */ REG_FIELD_FOR_EACH_SENSOR11(LAST_TEMP, TM_Sn_STATUS_OFF, 0, 9), /* No VALID field on v0.1 */ + /* xxx_STATUS bits: 1 == threshold violated */ REG_FIELD_FOR_EACH_SENSOR11(MIN_STATUS, TM_Sn_STATUS_OFF, 10, 10), REG_FIELD_FOR_EACH_SENSOR11(LOWER_STATUS, TM_Sn_STATUS_OFF, 11, 11), REG_FIELD_FOR_EACH_SENSOR11(UPPER_STATUS, TM_Sn_STATUS_OFF, 12, 12), diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c index 870f502f2cb6..bd2ddb684a45 100644 --- a/drivers/thermal/qcom/tsens-v1.c +++ b/drivers/thermal/qcom/tsens-v1.c @@ -6,6 +6,7 @@ #include <linux/bitops.h> #include <linux/regmap.h> #include <linux/delay.h> +#include <linux/slab.h> #include "tsens.h" /* ----- SROT ------ */ @@ -17,6 +18,70 @@ #define TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF 0x0004 #define TM_Sn_STATUS_OFF 0x0044 #define TM_TRDY_OFF 0x0084 +#define TM_HIGH_LOW_INT_STATUS_OFF 0x0088 +#define TM_HIGH_LOW_Sn_INT_THRESHOLD_OFF 0x0090 + +/* eeprom layout data for msm8956/76 (v1) */ +#define MSM8976_BASE0_MASK 0xff +#define MSM8976_BASE1_MASK 0xff +#define MSM8976_BASE1_SHIFT 8 + +#define MSM8976_S0_P1_MASK 0x3f00 +#define MSM8976_S1_P1_MASK 0x3f00000 +#define MSM8976_S2_P1_MASK 0x3f +#define MSM8976_S3_P1_MASK 0x3f000 +#define MSM8976_S4_P1_MASK 0x3f00 +#define MSM8976_S5_P1_MASK 0x3f00000 +#define MSM8976_S6_P1_MASK 0x3f +#define MSM8976_S7_P1_MASK 0x3f000 +#define MSM8976_S8_P1_MASK 0x1f8 +#define MSM8976_S9_P1_MASK 0x1f8000 +#define MSM8976_S10_P1_MASK 0xf8000000 +#define MSM8976_S10_P1_MASK_1 0x1 + +#define MSM8976_S0_P2_MASK 0xfc000 +#define MSM8976_S1_P2_MASK 0xfc000000 +#define MSM8976_S2_P2_MASK 0xfc0 +#define MSM8976_S3_P2_MASK 0xfc0000 +#define MSM8976_S4_P2_MASK 0xfc000 +#define MSM8976_S5_P2_MASK 0xfc000000 +#define MSM8976_S6_P2_MASK 0xfc0 +#define MSM8976_S7_P2_MASK 0xfc0000 +#define MSM8976_S8_P2_MASK 0x7e00 +#define MSM8976_S9_P2_MASK 0x7e00000 +#define MSM8976_S10_P2_MASK 0x7e + +#define MSM8976_S0_P1_SHIFT 8 +#define MSM8976_S1_P1_SHIFT 20 +#define MSM8976_S2_P1_SHIFT 0 +#define MSM8976_S3_P1_SHIFT 12 +#define MSM8976_S4_P1_SHIFT 8 +#define MSM8976_S5_P1_SHIFT 20 +#define MSM8976_S6_P1_SHIFT 0 +#define MSM8976_S7_P1_SHIFT 12 +#define MSM8976_S8_P1_SHIFT 3 +#define MSM8976_S9_P1_SHIFT 15 +#define MSM8976_S10_P1_SHIFT 27 +#define MSM8976_S10_P1_SHIFT_1 0 + +#define MSM8976_S0_P2_SHIFT 14 +#define MSM8976_S1_P2_SHIFT 26 +#define MSM8976_S2_P2_SHIFT 6 +#define MSM8976_S3_P2_SHIFT 18 +#define MSM8976_S4_P2_SHIFT 14 +#define MSM8976_S5_P2_SHIFT 26 +#define MSM8976_S6_P2_SHIFT 6 +#define MSM8976_S7_P2_SHIFT 18 +#define MSM8976_S8_P2_SHIFT 9 +#define MSM8976_S9_P2_SHIFT 21 +#define MSM8976_S10_P2_SHIFT 1 + +#define MSM8976_CAL_SEL_MASK 0x3 + +#define MSM8976_CAL_DEGC_PT1 30 +#define MSM8976_CAL_DEGC_PT2 120 +#define MSM8976_SLOPE_FACTOR 1000 +#define MSM8976_SLOPE_DEFAULT 3200 /* eeprom layout data for qcs404/405 (v1) */ #define BASE0_MASK 0x000007f8 @@ -77,6 +142,30 @@ #define CAL_SEL_MASK 7 #define CAL_SEL_SHIFT 0 +static void compute_intercept_slope_8976(struct tsens_priv *priv, + u32 *p1, u32 *p2, u32 mode) +{ + int i; + + priv->sensor[0].slope = 3313; + priv->sensor[1].slope = 3275; + priv->sensor[2].slope = 3320; + priv->sensor[3].slope = 3246; + priv->sensor[4].slope = 3279; + priv->sensor[5].slope = 3257; + priv->sensor[6].slope = 3234; + priv->sensor[7].slope = 3269; + priv->sensor[8].slope = 3255; + priv->sensor[9].slope = 3239; + priv->sensor[10].slope = 3286; + + for (i = 0; i < priv->num_sensors; i++) { + priv->sensor[i].offset = (p1[i] * MSM8976_SLOPE_FACTOR) - + (MSM8976_CAL_DEGC_PT1 * + priv->sensor[i].slope); + } +} + static int calibrate_v1(struct tsens_priv *priv) { u32 base0 = 0, base1 = 0; @@ -143,7 +232,72 @@ static int calibrate_v1(struct tsens_priv *priv) return 0; } -/* v1.x: qcs404,405 */ +static int calibrate_8976(struct tsens_priv *priv) +{ + int base0 = 0, base1 = 0, i; + u32 p1[11], p2[11]; + int mode = 0, tmp = 0; + u32 *qfprom_cdata; + + qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib"); + if (IS_ERR(qfprom_cdata)) + return PTR_ERR(qfprom_cdata); + + mode = (qfprom_cdata[4] & MSM8976_CAL_SEL_MASK); + dev_dbg(priv->dev, "calibration mode is %d\n", mode); + + switch (mode) { + case TWO_PT_CALIB: + base1 = (qfprom_cdata[2] & MSM8976_BASE1_MASK) >> MSM8976_BASE1_SHIFT; + p2[0] = (qfprom_cdata[0] & MSM8976_S0_P2_MASK) >> MSM8976_S0_P2_SHIFT; + p2[1] = (qfprom_cdata[0] & MSM8976_S1_P2_MASK) >> MSM8976_S1_P2_SHIFT; + p2[2] = (qfprom_cdata[1] & MSM8976_S2_P2_MASK) >> MSM8976_S2_P2_SHIFT; + p2[3] = (qfprom_cdata[1] & MSM8976_S3_P2_MASK) >> MSM8976_S3_P2_SHIFT; + p2[4] = (qfprom_cdata[2] & MSM8976_S4_P2_MASK) >> MSM8976_S4_P2_SHIFT; + p2[5] = (qfprom_cdata[2] & MSM8976_S5_P2_MASK) >> MSM8976_S5_P2_SHIFT; + p2[6] = (qfprom_cdata[3] & MSM8976_S6_P2_MASK) >> MSM8976_S6_P2_SHIFT; + p2[7] = (qfprom_cdata[3] & MSM8976_S7_P2_MASK) >> MSM8976_S7_P2_SHIFT; + p2[8] = (qfprom_cdata[4] & MSM8976_S8_P2_MASK) >> MSM8976_S8_P2_SHIFT; + p2[9] = (qfprom_cdata[4] & MSM8976_S9_P2_MASK) >> MSM8976_S9_P2_SHIFT; + p2[10] = (qfprom_cdata[5] & MSM8976_S10_P2_MASK) >> MSM8976_S10_P2_SHIFT; + + for (i = 0; i < priv->num_sensors; i++) + p2[i] = ((base1 + p2[i]) << 2); + /* Fall through */ + case ONE_PT_CALIB2: + base0 = qfprom_cdata[0] & MSM8976_BASE0_MASK; + p1[0] = (qfprom_cdata[0] & MSM8976_S0_P1_MASK) >> MSM8976_S0_P1_SHIFT; + p1[1] = (qfprom_cdata[0] & MSM8976_S1_P1_MASK) >> MSM8976_S1_P1_SHIFT; + p1[2] = (qfprom_cdata[1] & MSM8976_S2_P1_MASK) >> MSM8976_S2_P1_SHIFT; + p1[3] = (qfprom_cdata[1] & MSM8976_S3_P1_MASK) >> MSM8976_S3_P1_SHIFT; + p1[4] = (qfprom_cdata[2] & MSM8976_S4_P1_MASK) >> MSM8976_S4_P1_SHIFT; + p1[5] = (qfprom_cdata[2] & MSM8976_S5_P1_MASK) >> MSM8976_S5_P1_SHIFT; + p1[6] = (qfprom_cdata[3] & MSM8976_S6_P1_MASK) >> MSM8976_S6_P1_SHIFT; + p1[7] = (qfprom_cdata[3] & MSM8976_S7_P1_MASK) >> MSM8976_S7_P1_SHIFT; + p1[8] = (qfprom_cdata[4] & MSM8976_S8_P1_MASK) >> MSM8976_S8_P1_SHIFT; + p1[9] = (qfprom_cdata[4] & MSM8976_S9_P1_MASK) >> MSM8976_S9_P1_SHIFT; + p1[10] = (qfprom_cdata[4] & MSM8976_S10_P1_MASK) >> MSM8976_S10_P1_SHIFT; + tmp = (qfprom_cdata[5] & MSM8976_S10_P1_MASK_1) << MSM8976_S10_P1_SHIFT_1; + p1[10] |= tmp; + + for (i = 0; i < priv->num_sensors; i++) + p1[i] = (((base0) + p1[i]) << 2); + break; + default: + for (i = 0; i < priv->num_sensors; i++) { + p1[i] = 500; + p2[i] = 780; + } + break; + } + + compute_intercept_slope_8976(priv, p1, p2, mode); + kfree(qfprom_cdata); + + return 0; +} + +/* v1.x: msm8956,8976,qcs404,405 */ static const struct tsens_features tsens_v1_feat = { .ver_major = VER_1_X, @@ -168,9 +322,36 @@ static const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = { /* INTERRUPT ENABLE */ [INT_EN] = REG_FIELD(TM_INT_EN_OFF, 0, 0), + /* UPPER/LOWER TEMPERATURE THRESHOLDS */ + REG_FIELD_FOR_EACH_SENSOR11(LOW_THRESH, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 0, 9), + REG_FIELD_FOR_EACH_SENSOR11(UP_THRESH, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 10, 19), + + /* UPPER/LOWER INTERRUPTS [CLEAR/STATUS] */ + REG_FIELD_FOR_EACH_SENSOR11(LOW_INT_CLEAR, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 20, 20), + REG_FIELD_FOR_EACH_SENSOR11(UP_INT_CLEAR, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 21, 21), + [LOW_INT_STATUS_0] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 0, 0), + [LOW_INT_STATUS_1] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 1, 1), + [LOW_INT_STATUS_2] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 2, 2), + [LOW_INT_STATUS_3] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 3, 3), + [LOW_INT_STATUS_4] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 4, 4), + [LOW_INT_STATUS_5] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 5, 5), + [LOW_INT_STATUS_6] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 6, 6), + [LOW_INT_STATUS_7] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 7, 7), + [UP_INT_STATUS_0] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 8, 8), + [UP_INT_STATUS_1] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 9, 9), + [UP_INT_STATUS_2] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 10, 10), + [UP_INT_STATUS_3] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 11, 11), + [UP_INT_STATUS_4] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 12, 12), + [UP_INT_STATUS_5] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 13, 13), + [UP_INT_STATUS_6] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 14, 14), + [UP_INT_STATUS_7] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 15, 15), + + /* NO CRITICAL INTERRUPT SUPPORT on v1 */ + /* Sn_STATUS */ REG_FIELD_FOR_EACH_SENSOR11(LAST_TEMP, TM_Sn_STATUS_OFF, 0, 9), REG_FIELD_FOR_EACH_SENSOR11(VALID, TM_Sn_STATUS_OFF, 14, 14), + /* xxx_STATUS bits: 1 == threshold violated */ REG_FIELD_FOR_EACH_SENSOR11(MIN_STATUS, TM_Sn_STATUS_OFF, 10, 10), REG_FIELD_FOR_EACH_SENSOR11(LOWER_STATUS, TM_Sn_STATUS_OFF, 11, 11), REG_FIELD_FOR_EACH_SENSOR11(UPPER_STATUS, TM_Sn_STATUS_OFF, 12, 12), @@ -192,3 +373,18 @@ const struct tsens_plat_data data_tsens_v1 = { .feat = &tsens_v1_feat, .fields = tsens_v1_regfields, }; + +static const struct tsens_ops ops_8976 = { + .init = init_common, + .calibrate = calibrate_8976, + .get_temp = get_temp_tsens_valid, +}; + +/* Valid for both MSM8956 and MSM8976. Sensor ID 3 is unused. */ +const struct tsens_plat_data data_8976 = { + .num_sensors = 11, + .ops = &ops_8976, + .hw_ids = (unsigned int[]){0, 1, 2, 4, 5, 6, 7, 8, 9, 10}, + .feat = &tsens_v1_feat, + .fields = tsens_v1_regfields, +}; diff --git a/drivers/thermal/qcom/tsens-v2.c b/drivers/thermal/qcom/tsens-v2.c index 0a4f2b8fcab6..a4d15e1abfdd 100644 --- a/drivers/thermal/qcom/tsens-v2.c +++ b/drivers/thermal/qcom/tsens-v2.c @@ -50,9 +50,22 @@ static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = { /* v2 has separate enables for UPPER/LOWER/CRITICAL interrupts */ [INT_EN] = REG_FIELD(TM_INT_EN_OFF, 0, 2), + /* TEMPERATURE THRESHOLDS */ + REG_FIELD_FOR_EACH_SENSOR16(LOW_THRESH, TM_Sn_UPPER_LOWER_THRESHOLD_OFF, 0, 11), + REG_FIELD_FOR_EACH_SENSOR16(UP_THRESH, TM_Sn_UPPER_LOWER_THRESHOLD_OFF, 12, 23), + + /* INTERRUPTS [CLEAR/STATUS/MASK] */ + REG_FIELD_SPLIT_BITS_0_15(LOW_INT_STATUS, TM_UPPER_LOWER_INT_STATUS_OFF), + REG_FIELD_SPLIT_BITS_0_15(LOW_INT_CLEAR, TM_UPPER_LOWER_INT_CLEAR_OFF), + REG_FIELD_SPLIT_BITS_0_15(LOW_INT_MASK, TM_UPPER_LOWER_INT_MASK_OFF), + REG_FIELD_SPLIT_BITS_16_31(UP_INT_STATUS, TM_UPPER_LOWER_INT_STATUS_OFF), + REG_FIELD_SPLIT_BITS_16_31(UP_INT_CLEAR, TM_UPPER_LOWER_INT_CLEAR_OFF), + REG_FIELD_SPLIT_BITS_16_31(UP_INT_MASK, TM_UPPER_LOWER_INT_MASK_OFF), + /* Sn_STATUS */ REG_FIELD_FOR_EACH_SENSOR16(LAST_TEMP, TM_Sn_STATUS_OFF, 0, 11), REG_FIELD_FOR_EACH_SENSOR16(VALID, TM_Sn_STATUS_OFF, 21, 21), + /* xxx_STATUS bits: 1 == threshold violated */ REG_FIELD_FOR_EACH_SENSOR16(MIN_STATUS, TM_Sn_STATUS_OFF, 16, 16), REG_FIELD_FOR_EACH_SENSOR16(LOWER_STATUS, TM_Sn_STATUS_OFF, 17, 17), REG_FIELD_FOR_EACH_SENSOR16(UPPER_STATUS, TM_Sn_STATUS_OFF, 18, 18), diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c index 0627d8615c30..015e7d201598 100644 --- a/drivers/thermal/qcom/tsens.c +++ b/drivers/thermal/qcom/tsens.c @@ -3,9 +3,11 @@ * Copyright (c) 2015, The Linux Foundation. All rights reserved. */ +#include <linux/debugfs.h> #include <linux/err.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/pm.h> #include <linux/slab.h> @@ -14,19 +16,19 @@ static int tsens_get_temp(void *data, int *temp) { - const struct tsens_sensor *s = data; + struct tsens_sensor *s = data; struct tsens_priv *priv = s->priv; - return priv->ops->get_temp(priv, s->id, temp); + return priv->ops->get_temp(s, temp); } static int tsens_get_trend(void *data, int trip, enum thermal_trend *trend) { - const struct tsens_sensor *s = data; + struct tsens_sensor *s = data; struct tsens_priv *priv = s->priv; if (priv->ops->get_trend) - return priv->ops->get_trend(priv, s->id, trend); + return priv->ops->get_trend(s, trend); return -ENOTSUPP; } @@ -61,6 +63,9 @@ static const struct of_device_id tsens_table[] = { .compatible = "qcom,msm8974-tsens", .data = &data_8974, }, { + .compatible = "qcom,msm8976-tsens", + .data = &data_8976, + }, { .compatible = "qcom,msm8996-tsens", .data = &data_8996, }, { @@ -77,17 +82,18 @@ MODULE_DEVICE_TABLE(of, tsens_table); static const struct thermal_zone_of_device_ops tsens_of_ops = { .get_temp = tsens_get_temp, .get_trend = tsens_get_trend, + .set_trips = tsens_set_trips, }; static int tsens_register(struct tsens_priv *priv) { - int i; + int i, ret, irq; struct thermal_zone_device *tzd; + struct platform_device *pdev; for (i = 0; i < priv->num_sensors; i++) { priv->sensor[i].priv = priv; - priv->sensor[i].id = i; - tzd = devm_thermal_zone_of_sensor_register(priv->dev, i, + tzd = devm_thermal_zone_of_sensor_register(priv->dev, priv->sensor[i].hw_id, &priv->sensor[i], &tsens_of_ops); if (IS_ERR(tzd)) @@ -96,7 +102,31 @@ static int tsens_register(struct tsens_priv *priv) if (priv->ops->enable) priv->ops->enable(priv, i); } - return 0; + + pdev = of_find_device_by_node(priv->dev->of_node); + if (!pdev) + return -ENODEV; + + irq = platform_get_irq_byname(pdev, "uplow"); + if (irq < 0) { + ret = irq; + goto err_put_device; + } + + ret = devm_request_threaded_irq(&pdev->dev, irq, + NULL, tsens_irq_thread, + IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + dev_name(&pdev->dev), priv); + if (ret) { + dev_err(&pdev->dev, "%s: failed to get irq\n", __func__); + goto err_put_device; + } + + enable_irq_wake(irq); + +err_put_device: + put_device(&pdev->dev); + return ret; } static int tsens_probe(struct platform_device *pdev) @@ -128,7 +158,7 @@ static int tsens_probe(struct platform_device *pdev) of_property_read_u32(np, "#qcom,sensors", &num_sensors); if (num_sensors <= 0) { - dev_err(dev, "invalid number of sensors\n"); + dev_err(dev, "%s: invalid number of sensors\n", __func__); return -EINVAL; } @@ -150,12 +180,14 @@ static int tsens_probe(struct platform_device *pdev) priv->feat = data->feat; priv->fields = data->fields; + platform_set_drvdata(pdev, priv); + if (!priv->ops || !priv->ops->init || !priv->ops->get_temp) return -EINVAL; ret = priv->ops->init(priv); if (ret < 0) { - dev_err(dev, "tsens init failed\n"); + dev_err(dev, "%s: init failed\n", __func__); return ret; } @@ -163,22 +195,20 @@ static int tsens_probe(struct platform_device *pdev) ret = priv->ops->calibrate(priv); if (ret < 0) { if (ret != -EPROBE_DEFER) - dev_err(dev, "tsens calibration failed\n"); + dev_err(dev, "%s: calibration failed\n", __func__); return ret; } } - ret = tsens_register(priv); - - platform_set_drvdata(pdev, priv); - - return ret; + return tsens_register(priv); } static int tsens_remove(struct platform_device *pdev) { struct tsens_priv *priv = platform_get_drvdata(pdev); + debugfs_remove_recursive(priv->debug_root); + tsens_disable_irq(priv); if (priv->ops->disable) priv->ops->disable(priv); diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h index b89083b61c38..e24a865fbc34 100644 --- a/drivers/thermal/qcom/tsens.h +++ b/drivers/thermal/qcom/tsens.h @@ -13,8 +13,10 @@ #define CAL_DEGC_PT2 120 #define SLOPE_FACTOR 1000 #define SLOPE_DEFAULT 3200 +#define THRESHOLD_MAX_ADC_CODE 0x3ff +#define THRESHOLD_MIN_ADC_CODE 0x0 - +#include <linux/interrupt.h> #include <linux/thermal.h> #include <linux/regmap.h> #include <linux/slab.h> @@ -27,12 +29,16 @@ enum tsens_ver { VER_2_X, }; +enum tsens_irq_type { + LOWER, + UPPER, +}; + /** * struct tsens_sensor - data for each sensor connected to the tsens device * @priv: tsens device instance that this sensor is connected to * @tzd: pointer to the thermal zone that this sensor is in * @offset: offset of temperature adjustment curve - * @id: Sensor ID * @hw_id: HW ID can be used in case of platform-specific IDs * @slope: slope of temperature adjustment curve * @status: 8960-specific variable to track 8960 and 8660 status register offset @@ -41,7 +47,6 @@ struct tsens_sensor { struct tsens_priv *priv; struct thermal_zone_device *tzd; int offset; - unsigned int id; unsigned int hw_id; int slope; u32 status; @@ -62,13 +67,13 @@ struct tsens_ops { /* mandatory callbacks */ int (*init)(struct tsens_priv *priv); int (*calibrate)(struct tsens_priv *priv); - int (*get_temp)(struct tsens_priv *priv, int i, int *temp); + int (*get_temp)(struct tsens_sensor *s, int *temp); /* optional callbacks */ int (*enable)(struct tsens_priv *priv, int i); void (*disable)(struct tsens_priv *priv); int (*suspend)(struct tsens_priv *priv); int (*resume)(struct tsens_priv *priv); - int (*get_trend)(struct tsens_priv *priv, int i, enum thermal_trend *trend); + int (*get_trend)(struct tsens_sensor *s, enum thermal_trend *trend); }; #define REG_FIELD_FOR_EACH_SENSOR11(_name, _offset, _startbit, _stopbit) \ @@ -102,22 +107,66 @@ struct tsens_ops { [_name##_##14] = REG_FIELD(_offset + 56, _startbit, _stopbit), \ [_name##_##15] = REG_FIELD(_offset + 60, _startbit, _stopbit) -/* reg_field IDs to use as an index into an array */ +#define REG_FIELD_SPLIT_BITS_0_15(_name, _offset) \ + [_name##_##0] = REG_FIELD(_offset, 0, 0), \ + [_name##_##1] = REG_FIELD(_offset, 1, 1), \ + [_name##_##2] = REG_FIELD(_offset, 2, 2), \ + [_name##_##3] = REG_FIELD(_offset, 3, 3), \ + [_name##_##4] = REG_FIELD(_offset, 4, 4), \ + [_name##_##5] = REG_FIELD(_offset, 5, 5), \ + [_name##_##6] = REG_FIELD(_offset, 6, 6), \ + [_name##_##7] = REG_FIELD(_offset, 7, 7), \ + [_name##_##8] = REG_FIELD(_offset, 8, 8), \ + [_name##_##9] = REG_FIELD(_offset, 9, 9), \ + [_name##_##10] = REG_FIELD(_offset, 10, 10), \ + [_name##_##11] = REG_FIELD(_offset, 11, 11), \ + [_name##_##12] = REG_FIELD(_offset, 12, 12), \ + [_name##_##13] = REG_FIELD(_offset, 13, 13), \ + [_name##_##14] = REG_FIELD(_offset, 14, 14), \ + [_name##_##15] = REG_FIELD(_offset, 15, 15) + +#define REG_FIELD_SPLIT_BITS_16_31(_name, _offset) \ + [_name##_##0] = REG_FIELD(_offset, 16, 16), \ + [_name##_##1] = REG_FIELD(_offset, 17, 17), \ + [_name##_##2] = REG_FIELD(_offset, 18, 18), \ + [_name##_##3] = REG_FIELD(_offset, 19, 19), \ + [_name##_##4] = REG_FIELD(_offset, 20, 20), \ + [_name##_##5] = REG_FIELD(_offset, 21, 21), \ + [_name##_##6] = REG_FIELD(_offset, 22, 22), \ + [_name##_##7] = REG_FIELD(_offset, 23, 23), \ + [_name##_##8] = REG_FIELD(_offset, 24, 24), \ + [_name##_##9] = REG_FIELD(_offset, 25, 25), \ + [_name##_##10] = REG_FIELD(_offset, 26, 26), \ + [_name##_##11] = REG_FIELD(_offset, 27, 27), \ + [_name##_##12] = REG_FIELD(_offset, 28, 28), \ + [_name##_##13] = REG_FIELD(_offset, 29, 29), \ + [_name##_##14] = REG_FIELD(_offset, 30, 30), \ + [_name##_##15] = REG_FIELD(_offset, 31, 31) + +/* + * reg_field IDs to use as an index into an array + * If you change the order of the entries, check the devm_regmap_field_alloc() + * calls in init_common() + */ enum regfield_ids { /* ----- SROT ------ */ /* HW_VER */ - VER_MAJOR = 0, + VER_MAJOR, VER_MINOR, VER_STEP, /* CTRL_OFFSET */ - TSENS_EN = 3, + TSENS_EN, TSENS_SW_RST, SENSOR_EN, CODE_OR_TEMP, /* ----- TM ------ */ + /* TRDY */ + TRDY, + /* INTERRUPT ENABLE */ + INT_EN, /* v2+ has separate enables for crit, upper and lower irq */ /* STATUS */ - LAST_TEMP_0 = 7, /* Last temperature reading */ + LAST_TEMP_0, /* Last temperature reading */ LAST_TEMP_1, LAST_TEMP_2, LAST_TEMP_3, @@ -133,7 +182,7 @@ enum regfield_ids { LAST_TEMP_13, LAST_TEMP_14, LAST_TEMP_15, - VALID_0 = 23, /* VALID reading or not */ + VALID_0, /* VALID reading or not */ VALID_1, VALID_2, VALID_3, @@ -149,38 +198,6 @@ enum regfield_ids { VALID_13, VALID_14, VALID_15, - MIN_STATUS_0, /* MIN threshold violated */ - MIN_STATUS_1, - MIN_STATUS_2, - MIN_STATUS_3, - MIN_STATUS_4, - MIN_STATUS_5, - MIN_STATUS_6, - MIN_STATUS_7, - MIN_STATUS_8, - MIN_STATUS_9, - MIN_STATUS_10, - MIN_STATUS_11, - MIN_STATUS_12, - MIN_STATUS_13, - MIN_STATUS_14, - MIN_STATUS_15, - MAX_STATUS_0, /* MAX threshold violated */ - MAX_STATUS_1, - MAX_STATUS_2, - MAX_STATUS_3, - MAX_STATUS_4, - MAX_STATUS_5, - MAX_STATUS_6, - MAX_STATUS_7, - MAX_STATUS_8, - MAX_STATUS_9, - MAX_STATUS_10, - MAX_STATUS_11, - MAX_STATUS_12, - MAX_STATUS_13, - MAX_STATUS_14, - MAX_STATUS_15, LOWER_STATUS_0, /* LOWER threshold violated */ LOWER_STATUS_1, LOWER_STATUS_2, @@ -197,6 +214,70 @@ enum regfield_ids { LOWER_STATUS_13, LOWER_STATUS_14, LOWER_STATUS_15, + LOW_INT_STATUS_0, /* LOWER interrupt status */ + LOW_INT_STATUS_1, + LOW_INT_STATUS_2, + LOW_INT_STATUS_3, + LOW_INT_STATUS_4, + LOW_INT_STATUS_5, + LOW_INT_STATUS_6, + LOW_INT_STATUS_7, + LOW_INT_STATUS_8, + LOW_INT_STATUS_9, + LOW_INT_STATUS_10, + LOW_INT_STATUS_11, + LOW_INT_STATUS_12, + LOW_INT_STATUS_13, + LOW_INT_STATUS_14, + LOW_INT_STATUS_15, + LOW_INT_CLEAR_0, /* LOWER interrupt clear */ + LOW_INT_CLEAR_1, + LOW_INT_CLEAR_2, + LOW_INT_CLEAR_3, + LOW_INT_CLEAR_4, + LOW_INT_CLEAR_5, + LOW_INT_CLEAR_6, + LOW_INT_CLEAR_7, + LOW_INT_CLEAR_8, + LOW_INT_CLEAR_9, + LOW_INT_CLEAR_10, + LOW_INT_CLEAR_11, + LOW_INT_CLEAR_12, + LOW_INT_CLEAR_13, + LOW_INT_CLEAR_14, + LOW_INT_CLEAR_15, + LOW_INT_MASK_0, /* LOWER interrupt mask */ + LOW_INT_MASK_1, + LOW_INT_MASK_2, + LOW_INT_MASK_3, + LOW_INT_MASK_4, + LOW_INT_MASK_5, + LOW_INT_MASK_6, + LOW_INT_MASK_7, + LOW_INT_MASK_8, + LOW_INT_MASK_9, + LOW_INT_MASK_10, + LOW_INT_MASK_11, + LOW_INT_MASK_12, + LOW_INT_MASK_13, + LOW_INT_MASK_14, + LOW_INT_MASK_15, + LOW_THRESH_0, /* LOWER threshold values */ + LOW_THRESH_1, + LOW_THRESH_2, + LOW_THRESH_3, + LOW_THRESH_4, + LOW_THRESH_5, + LOW_THRESH_6, + LOW_THRESH_7, + LOW_THRESH_8, + LOW_THRESH_9, + LOW_THRESH_10, + LOW_THRESH_11, + LOW_THRESH_12, + LOW_THRESH_13, + LOW_THRESH_14, + LOW_THRESH_15, UPPER_STATUS_0, /* UPPER threshold violated */ UPPER_STATUS_1, UPPER_STATUS_2, @@ -213,6 +294,70 @@ enum regfield_ids { UPPER_STATUS_13, UPPER_STATUS_14, UPPER_STATUS_15, + UP_INT_STATUS_0, /* UPPER interrupt status */ + UP_INT_STATUS_1, + UP_INT_STATUS_2, + UP_INT_STATUS_3, + UP_INT_STATUS_4, + UP_INT_STATUS_5, + UP_INT_STATUS_6, + UP_INT_STATUS_7, + UP_INT_STATUS_8, + UP_INT_STATUS_9, + UP_INT_STATUS_10, + UP_INT_STATUS_11, + UP_INT_STATUS_12, + UP_INT_STATUS_13, + UP_INT_STATUS_14, + UP_INT_STATUS_15, + UP_INT_CLEAR_0, /* UPPER interrupt clear */ + UP_INT_CLEAR_1, + UP_INT_CLEAR_2, + UP_INT_CLEAR_3, + UP_INT_CLEAR_4, + UP_INT_CLEAR_5, + UP_INT_CLEAR_6, + UP_INT_CLEAR_7, + UP_INT_CLEAR_8, + UP_INT_CLEAR_9, + UP_INT_CLEAR_10, + UP_INT_CLEAR_11, + UP_INT_CLEAR_12, + UP_INT_CLEAR_13, + UP_INT_CLEAR_14, + UP_INT_CLEAR_15, + UP_INT_MASK_0, /* UPPER interrupt mask */ + UP_INT_MASK_1, + UP_INT_MASK_2, + UP_INT_MASK_3, + UP_INT_MASK_4, + UP_INT_MASK_5, + UP_INT_MASK_6, + UP_INT_MASK_7, + UP_INT_MASK_8, + UP_INT_MASK_9, + UP_INT_MASK_10, + UP_INT_MASK_11, + UP_INT_MASK_12, + UP_INT_MASK_13, + UP_INT_MASK_14, + UP_INT_MASK_15, + UP_THRESH_0, /* UPPER threshold values */ + UP_THRESH_1, + UP_THRESH_2, + UP_THRESH_3, + UP_THRESH_4, + UP_THRESH_5, + UP_THRESH_6, + UP_THRESH_7, + UP_THRESH_8, + UP_THRESH_9, + UP_THRESH_10, + UP_THRESH_11, + UP_THRESH_12, + UP_THRESH_13, + UP_THRESH_14, + UP_THRESH_15, CRITICAL_STATUS_0, /* CRITICAL threshold violated */ CRITICAL_STATUS_1, CRITICAL_STATUS_2, @@ -229,13 +374,38 @@ enum regfield_ids { CRITICAL_STATUS_13, CRITICAL_STATUS_14, CRITICAL_STATUS_15, - /* TRDY */ - TRDY, - /* INTERRUPT ENABLE */ - INT_EN, /* Pre-V1, V1.x */ - LOW_INT_EN, /* V2.x */ - UP_INT_EN, /* V2.x */ - CRIT_INT_EN, /* V2.x */ + MIN_STATUS_0, /* MIN threshold violated */ + MIN_STATUS_1, + MIN_STATUS_2, + MIN_STATUS_3, + MIN_STATUS_4, + MIN_STATUS_5, + MIN_STATUS_6, + MIN_STATUS_7, + MIN_STATUS_8, + MIN_STATUS_9, + MIN_STATUS_10, + MIN_STATUS_11, + MIN_STATUS_12, + MIN_STATUS_13, + MIN_STATUS_14, + MIN_STATUS_15, + MAX_STATUS_0, /* MAX threshold violated */ + MAX_STATUS_1, + MAX_STATUS_2, + MAX_STATUS_3, + MAX_STATUS_4, + MAX_STATUS_5, + MAX_STATUS_6, + MAX_STATUS_7, + MAX_STATUS_8, + MAX_STATUS_9, + MAX_STATUS_10, + MAX_STATUS_11, + MAX_STATUS_12, + MAX_STATUS_13, + MAX_STATUS_14, + MAX_STATUS_15, /* Keep last */ MAX_REGFIELDS @@ -295,6 +465,8 @@ struct tsens_context { * @feat: features of the IP * @fields: bitfield locations * @ops: pointer to list of callbacks supported by this device + * @debug_root: pointer to debugfs dentry for all tsens + * @debug: pointer to debugfs dentry for tsens controller * @sensor: list of sensors attached to this device */ struct tsens_priv { @@ -303,19 +475,31 @@ struct tsens_priv { struct regmap *tm_map; struct regmap *srot_map; u32 tm_offset; + + /* lock for upper/lower threshold interrupts */ + spinlock_t ul_lock; + struct regmap_field *rf[MAX_REGFIELDS]; struct tsens_context ctx; const struct tsens_features *feat; const struct reg_field *fields; const struct tsens_ops *ops; + + struct dentry *debug_root; + struct dentry *debug; + struct tsens_sensor sensor[0]; }; char *qfprom_read(struct device *dev, const char *cname); void compute_intercept_slope(struct tsens_priv *priv, u32 *pt1, u32 *pt2, u32 mode); int init_common(struct tsens_priv *priv); -int get_temp_tsens_valid(struct tsens_priv *priv, int i, int *temp); -int get_temp_common(struct tsens_priv *priv, int i, int *temp); +int get_temp_tsens_valid(struct tsens_sensor *s, int *temp); +int get_temp_common(struct tsens_sensor *s, int *temp); +int tsens_enable_irq(struct tsens_priv *priv); +void tsens_disable_irq(struct tsens_priv *priv); +int tsens_set_trips(void *_sensor, int low, int high); +irqreturn_t tsens_irq_thread(int irq, void *data); /* TSENS target */ extern const struct tsens_plat_data data_8960; @@ -324,7 +508,7 @@ extern const struct tsens_plat_data data_8960; extern const struct tsens_plat_data data_8916, data_8974; /* TSENS v1 targets */ -extern const struct tsens_plat_data data_tsens_v1; +extern const struct tsens_plat_data data_tsens_v1, data_8976; /* TSENS v2 targets */ extern const struct tsens_plat_data data_8996, data_tsens_v2; diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c index 39542c670301..45e9fcb172cc 100644 --- a/drivers/thermal/qoriq_thermal.c +++ b/drivers/thermal/qoriq_thermal.c @@ -13,7 +13,16 @@ #include "thermal_core.h" -#define SITES_MAX 16 +#define SITES_MAX 16 +#define TMR_DISABLE 0x0 +#define TMR_ME 0x80000000 +#define TMR_ALPF 0x0c000000 +#define TMR_ALPF_V2 0x03000000 +#define TMTMIR_DEFAULT 0x0000000f +#define TIER_DISABLE 0x0 +#define TEUMR0_V2 0x51009c00 +#define TMU_VER1 0x1 +#define TMU_VER2 0x2 /* * QorIQ TMU Registers @@ -24,17 +33,12 @@ struct qoriq_tmu_site_regs { u8 res0[0x8]; }; -struct qoriq_tmu_regs { +struct qoriq_tmu_regs_v1 { u32 tmr; /* Mode Register */ -#define TMR_DISABLE 0x0 -#define TMR_ME 0x80000000 -#define TMR_ALPF 0x0c000000 u32 tsr; /* Status Register */ u32 tmtmir; /* Temperature measurement interval Register */ -#define TMTMIR_DEFAULT 0x0000000f u8 res0[0x14]; u32 tier; /* Interrupt Enable Register */ -#define TIER_DISABLE 0x0 u32 tidr; /* Interrupt Detect Register */ u32 tiscr; /* Interrupt Site Capture Register */ u32 ticscr; /* Interrupt Critical Site Capture Register */ @@ -54,10 +58,50 @@ struct qoriq_tmu_regs { u32 ipbrr0; /* IP Block Revision Register 0 */ u32 ipbrr1; /* IP Block Revision Register 1 */ u8 res6[0x310]; - u32 ttr0cr; /* Temperature Range 0 Control Register */ - u32 ttr1cr; /* Temperature Range 1 Control Register */ - u32 ttr2cr; /* Temperature Range 2 Control Register */ - u32 ttr3cr; /* Temperature Range 3 Control Register */ + u32 ttrcr[4]; /* Temperature Range Control Register */ +}; + +struct qoriq_tmu_regs_v2 { + u32 tmr; /* Mode Register */ + u32 tsr; /* Status Register */ + u32 tmsr; /* monitor site register */ + u32 tmtmir; /* Temperature measurement interval Register */ + u8 res0[0x10]; + u32 tier; /* Interrupt Enable Register */ + u32 tidr; /* Interrupt Detect Register */ + u8 res1[0x8]; + u32 tiiscr; /* interrupt immediate site capture register */ + u32 tiascr; /* interrupt average site capture register */ + u32 ticscr; /* Interrupt Critical Site Capture Register */ + u32 res2; + u32 tmhtcr; /* monitor high temperature capture register */ + u32 tmltcr; /* monitor low temperature capture register */ + u32 tmrtrcr; /* monitor rising temperature rate capture register */ + u32 tmftrcr; /* monitor falling temperature rate capture register */ + u32 tmhtitr; /* High Temperature Immediate Threshold */ + u32 tmhtatr; /* High Temperature Average Threshold */ + u32 tmhtactr; /* High Temperature Average Crit Threshold */ + u32 res3; + u32 tmltitr; /* monitor low temperature immediate threshold */ + u32 tmltatr; /* monitor low temperature average threshold register */ + u32 tmltactr; /* monitor low temperature average critical threshold */ + u32 res4; + u32 tmrtrctr; /* monitor rising temperature rate critical threshold */ + u32 tmftrctr; /* monitor falling temperature rate critical threshold*/ + u8 res5[0x8]; + u32 ttcfgr; /* Temperature Configuration Register */ + u32 tscfgr; /* Sensor Configuration Register */ + u8 res6[0x78]; + struct qoriq_tmu_site_regs site[SITES_MAX]; + u8 res7[0x9f8]; + u32 ipbrr0; /* IP Block Revision Register 0 */ + u32 ipbrr1; /* IP Block Revision Register 1 */ + u8 res8[0x300]; + u32 teumr0; + u32 teumr1; + u32 teumr2; + u32 res9; + u32 ttrcr[4]; /* Temperature Range Control Register */ }; struct qoriq_tmu_data; @@ -72,7 +116,9 @@ struct qoriq_sensor { }; struct qoriq_tmu_data { - struct qoriq_tmu_regs __iomem *regs; + int ver; + struct qoriq_tmu_regs_v1 __iomem *regs; + struct qoriq_tmu_regs_v2 __iomem *regs_v2; struct clk *clk; bool little_endian; struct qoriq_sensor *sensor[SITES_MAX]; @@ -132,12 +178,23 @@ static int qoriq_tmu_register_tmu_zone(struct platform_device *pdev) return PTR_ERR(qdata->sensor[id]->tzd); } - sites |= 0x1 << (15 - id); + if (qdata->ver == TMU_VER1) + sites |= 0x1 << (15 - id); + else + sites |= 0x1 << id; } /* Enable monitoring */ - if (sites != 0) - tmu_write(qdata, sites | TMR_ME | TMR_ALPF, &qdata->regs->tmr); + if (sites != 0) { + if (qdata->ver == TMU_VER1) { + tmu_write(qdata, sites | TMR_ME | TMR_ALPF, + &qdata->regs->tmr); + } else { + tmu_write(qdata, sites, &qdata->regs_v2->tmsr); + tmu_write(qdata, TMR_ME | TMR_ALPF_V2, + &qdata->regs_v2->tmr); + } + } return 0; } @@ -150,16 +207,21 @@ static int qoriq_tmu_calibration(struct platform_device *pdev) struct device_node *np = pdev->dev.of_node; struct qoriq_tmu_data *data = platform_get_drvdata(pdev); - if (of_property_read_u32_array(np, "fsl,tmu-range", range, 4)) { - dev_err(&pdev->dev, "missing calibration range.\n"); - return -ENODEV; + len = of_property_count_u32_elems(np, "fsl,tmu-range"); + if (len < 0 || len > 4) { + dev_err(&pdev->dev, "invalid range data.\n"); + return len; + } + + val = of_property_read_u32_array(np, "fsl,tmu-range", range, len); + if (val != 0) { + dev_err(&pdev->dev, "failed to read range data.\n"); + return val; } /* Init temperature range registers */ - tmu_write(data, range[0], &data->regs->ttr0cr); - tmu_write(data, range[1], &data->regs->ttr1cr); - tmu_write(data, range[2], &data->regs->ttr2cr); - tmu_write(data, range[3], &data->regs->ttr3cr); + for (i = 0; i < len; i++) + tmu_write(data, range[i], &data->regs->ttrcr[i]); calibration = of_get_property(np, "fsl,tmu-calibration", &len); if (calibration == NULL || len % 8) { @@ -183,7 +245,12 @@ static void qoriq_tmu_init_device(struct qoriq_tmu_data *data) tmu_write(data, TIER_DISABLE, &data->regs->tier); /* Set update_interval */ - tmu_write(data, TMTMIR_DEFAULT, &data->regs->tmtmir); + if (data->ver == TMU_VER1) { + tmu_write(data, TMTMIR_DEFAULT, &data->regs->tmtmir); + } else { + tmu_write(data, TMTMIR_DEFAULT, &data->regs_v2->tmtmir); + tmu_write(data, TEUMR0_V2, &data->regs_v2->teumr0); + } /* Disable monitoring */ tmu_write(data, TMR_DISABLE, &data->regs->tmr); @@ -192,6 +259,7 @@ static void qoriq_tmu_init_device(struct qoriq_tmu_data *data) static int qoriq_tmu_probe(struct platform_device *pdev) { int ret; + u32 ver; struct qoriq_tmu_data *data; struct device_node *np = pdev->dev.of_node; @@ -220,6 +288,12 @@ static int qoriq_tmu_probe(struct platform_device *pdev) return ret; } + /* version register offset at: 0xbf8 on both v1 and v2 */ + ver = tmu_read(data, &data->regs->ipbrr0); + data->ver = (ver >> 8) & 0xff; + if (data->ver == TMU_VER2) + data->regs_v2 = (void __iomem *)data->regs; + qoriq_tmu_init_device(data); /* TMU initialization */ ret = qoriq_tmu_calibration(pdev); /* TMU calibration */ diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c index 755d2b5bd2c2..1460cf9d9f1c 100644 --- a/drivers/thermal/rcar_gen3_thermal.c +++ b/drivers/thermal/rcar_gen3_thermal.c @@ -315,6 +315,10 @@ static const struct of_device_id rcar_gen3_thermal_dt_ids[] = { .data = &rcar_gen3_ths_tj_1_m3_w, }, { + .compatible = "renesas,r8a774b1-thermal", + .data = &rcar_gen3_ths_tj_1, + }, + { .compatible = "renesas,r8a7795-thermal", .data = &rcar_gen3_ths_tj_1, }, diff --git a/drivers/thermal/thermal-generic-adc.c b/drivers/thermal/thermal-generic-adc.c index dcecf2e8dc8e..ae5743c9a894 100644 --- a/drivers/thermal/thermal-generic-adc.c +++ b/drivers/thermal/thermal-generic-adc.c @@ -134,7 +134,8 @@ static int gadc_thermal_probe(struct platform_device *pdev) gti->channel = devm_iio_channel_get(&pdev->dev, "sensor-channel"); if (IS_ERR(gti->channel)) { ret = PTR_ERR(gti->channel); - dev_err(&pdev->dev, "IIO channel not found: %d\n", ret); + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "IIO channel not found: %d\n", ret); return ret; } @@ -142,8 +143,10 @@ static int gadc_thermal_probe(struct platform_device *pdev) &gadc_thermal_ops); if (IS_ERR(gti->tz_dev)) { ret = PTR_ERR(gti->tz_dev); - dev_err(&pdev->dev, "Thermal zone sensor register failed: %d\n", - ret); + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, + "Thermal zone sensor register failed: %d\n", + ret); return ret; } diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index d4481cc8958f..9a321dc548c8 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -19,8 +19,6 @@ #include <linux/reboot.h> #include <linux/string.h> #include <linux/of.h> -#include <net/netlink.h> -#include <net/genetlink.h> #include <linux/suspend.h> #define CREATE_TRACE_POINTS @@ -304,7 +302,7 @@ static void thermal_zone_device_set_polling(struct thermal_zone_device *tz, &tz->poll_queue, msecs_to_jiffies(delay)); else - cancel_delayed_work_sync(&tz->poll_queue); + cancel_delayed_work(&tz->poll_queue); } static void monitor_thermal_zone(struct thermal_zone_device *tz) @@ -1414,7 +1412,7 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) mutex_unlock(&thermal_list_lock); - thermal_zone_device_set_polling(tz, 0); + cancel_delayed_work_sync(&tz->poll_queue); thermal_set_governor(tz, NULL); @@ -1464,97 +1462,6 @@ exit: } EXPORT_SYMBOL_GPL(thermal_zone_get_zone_by_name); -#ifdef CONFIG_NET -static const struct genl_multicast_group thermal_event_mcgrps[] = { - { .name = THERMAL_GENL_MCAST_GROUP_NAME, }, -}; - -static struct genl_family thermal_event_genl_family __ro_after_init = { - .module = THIS_MODULE, - .name = THERMAL_GENL_FAMILY_NAME, - .version = THERMAL_GENL_VERSION, - .maxattr = THERMAL_GENL_ATTR_MAX, - .mcgrps = thermal_event_mcgrps, - .n_mcgrps = ARRAY_SIZE(thermal_event_mcgrps), -}; - -int thermal_generate_netlink_event(struct thermal_zone_device *tz, - enum events event) -{ - struct sk_buff *skb; - struct nlattr *attr; - struct thermal_genl_event *thermal_event; - void *msg_header; - int size; - int result; - static unsigned int thermal_event_seqnum; - - if (!tz) - return -EINVAL; - - /* allocate memory */ - size = nla_total_size(sizeof(struct thermal_genl_event)) + - nla_total_size(0); - - skb = genlmsg_new(size, GFP_ATOMIC); - if (!skb) - return -ENOMEM; - - /* add the genetlink message header */ - msg_header = genlmsg_put(skb, 0, thermal_event_seqnum++, - &thermal_event_genl_family, 0, - THERMAL_GENL_CMD_EVENT); - if (!msg_header) { - nlmsg_free(skb); - return -ENOMEM; - } - - /* fill the data */ - attr = nla_reserve(skb, THERMAL_GENL_ATTR_EVENT, - sizeof(struct thermal_genl_event)); - - if (!attr) { - nlmsg_free(skb); - return -EINVAL; - } - - thermal_event = nla_data(attr); - if (!thermal_event) { - nlmsg_free(skb); - return -EINVAL; - } - - memset(thermal_event, 0, sizeof(struct thermal_genl_event)); - - thermal_event->orig = tz->id; - thermal_event->event = event; - - /* send multicast genetlink message */ - genlmsg_end(skb, msg_header); - - result = genlmsg_multicast(&thermal_event_genl_family, skb, 0, - 0, GFP_ATOMIC); - if (result) - dev_err(&tz->device, "Failed to send netlink event:%d", result); - - return result; -} -EXPORT_SYMBOL_GPL(thermal_generate_netlink_event); - -static int __init genetlink_init(void) -{ - return genl_register_family(&thermal_event_genl_family); -} - -static void genetlink_exit(void) -{ - genl_unregister_family(&thermal_event_genl_family); -} -#else /* !CONFIG_NET */ -static inline int genetlink_init(void) { return 0; } -static inline void genetlink_exit(void) {} -#endif /* !CONFIG_NET */ - static int thermal_pm_notify(struct notifier_block *nb, unsigned long mode, void *_unused) { @@ -1607,13 +1514,9 @@ static int __init thermal_init(void) if (result) goto unregister_governors; - result = genetlink_init(); - if (result) - goto unregister_class; - result = of_parse_thermal_zones(); if (result) - goto exit_netlink; + goto unregister_class; result = register_pm_notifier(&thermal_pm_nb); if (result) @@ -1622,8 +1525,6 @@ static int __init thermal_init(void) return 0; -exit_netlink: - genetlink_exit(); unregister_class: class_unregister(&thermal_class); unregister_governors: @@ -1636,4 +1537,4 @@ error: mutex_destroy(&poweroff_lock); return result; } -fs_initcall(thermal_init); +core_initcall(thermal_init); diff --git a/drivers/thermal/thermal_mmio.c b/drivers/thermal/thermal_mmio.c index 40524fa13533..d0bdf1ea3331 100644 --- a/drivers/thermal/thermal_mmio.c +++ b/drivers/thermal/thermal_mmio.c @@ -110,7 +110,6 @@ static struct platform_driver thermal_mmio_driver = { .probe = thermal_mmio_probe, .driver = { .name = "thermal-mmio", - .owner = THIS_MODULE, .of_match_table = of_match_ptr(thermal_mmio_id_table), }, }; diff --git a/include/linux/cpu_cooling.h b/include/linux/cpu_cooling.h index bae54bb7c048..b74732535e4b 100644 --- a/include/linux/cpu_cooling.h +++ b/include/linux/cpu_cooling.h @@ -33,6 +33,13 @@ cpufreq_cooling_register(struct cpufreq_policy *policy); */ void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev); +/** + * of_cpufreq_cooling_register - create cpufreq cooling device based on DT. + * @policy: cpufreq policy. + */ +struct thermal_cooling_device * +of_cpufreq_cooling_register(struct cpufreq_policy *policy); + #else /* !CONFIG_CPU_THERMAL */ static inline struct thermal_cooling_device * cpufreq_cooling_register(struct cpufreq_policy *policy) @@ -45,21 +52,12 @@ void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) { return; } -#endif /* CONFIG_CPU_THERMAL */ -#if defined(CONFIG_THERMAL_OF) && defined(CONFIG_CPU_THERMAL) -/** - * of_cpufreq_cooling_register - create cpufreq cooling device based on DT. - * @policy: cpufreq policy. - */ -struct thermal_cooling_device * -of_cpufreq_cooling_register(struct cpufreq_policy *policy); -#else static inline struct thermal_cooling_device * of_cpufreq_cooling_register(struct cpufreq_policy *policy) { return NULL; } -#endif /* defined(CONFIG_THERMAL_OF) && defined(CONFIG_CPU_THERMAL) */ +#endif /* CONFIG_CPU_THERMAL */ #endif /* __CPU_COOLING_H__ */ diff --git a/include/linux/energy_model.h b/include/linux/energy_model.h index 73f8c3cb9588..d249b88a4d5a 100644 --- a/include/linux/energy_model.h +++ b/include/linux/energy_model.h @@ -9,7 +9,6 @@ #include <linux/sched/topology.h> #include <linux/types.h> -#ifdef CONFIG_ENERGY_MODEL /** * em_cap_state - Capacity state of a performance domain * @frequency: The CPU frequency in KHz, for consistency with CPUFreq @@ -40,6 +39,7 @@ struct em_perf_domain { unsigned long cpus[0]; }; +#ifdef CONFIG_ENERGY_MODEL #define EM_CPU_MAX_POWER 0xFFFF struct em_data_callback { @@ -160,7 +160,6 @@ static inline int em_pd_nr_cap_states(struct em_perf_domain *pd) } #else -struct em_perf_domain {}; struct em_data_callback {}; #define EM_DATA_CB(_active_power_cb) { } diff --git a/include/linux/thermal.h b/include/linux/thermal.h index e45659c75920..d9111aebb97d 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -544,15 +544,4 @@ static inline void thermal_notify_framework(struct thermal_zone_device *tz, { } #endif /* CONFIG_THERMAL */ -#if defined(CONFIG_NET) && IS_ENABLED(CONFIG_THERMAL) -extern int thermal_generate_netlink_event(struct thermal_zone_device *tz, - enum events event); -#else -static inline int thermal_generate_netlink_event(struct thermal_zone_device *tz, - enum events event) -{ - return 0; -} -#endif - #endif /* __THERMAL_H__ */ diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c index 86800b4d5453..322ca8860f54 100644 --- a/kernel/sched/cpufreq_schedutil.c +++ b/kernel/sched/cpufreq_schedutil.c @@ -915,7 +915,7 @@ static int __init sugov_register(void) { return cpufreq_register_governor(&schedutil_gov); } -fs_initcall(sugov_register); +core_initcall(sugov_register); #ifdef CONFIG_ENERGY_MODEL extern bool sched_energy_update; |