diff options
196 files changed, 4061 insertions, 3500 deletions
diff --git a/Documentation/devicetree/bindings/arm/insignal-boards.txt b/Documentation/devicetree/bindings/arm/insignal-boards.txt new file mode 100644 index 000000000000..524c3dc5d808 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/insignal-boards.txt @@ -0,0 +1,8 @@ +* Insignal's Exynos4210 based Origen evaluation board + +Origen low-cost evaluation board is based on Samsung's Exynos4210 SoC. + +Required root node properties: + - compatible = should be one or more of the following. + (a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board. + (b) "samsung,exynos4210" - for boards based on Exynos4210 SoC. diff --git a/Documentation/devicetree/bindings/arm/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung-boards.txt new file mode 100644 index 000000000000..0bf68be56fd1 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/samsung-boards.txt @@ -0,0 +1,8 @@ +* Samsung's Exynos4210 based SMDKV310 evaluation board + +SMDKV310 evaluation board is based on Samsung's Exynos4210 SoC. + +Required root node properties: + - compatible = should be one or more of the following. + (a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board. + (b) "samsung,exynos4210" - for boards based on Exynos4210 SoC. diff --git a/Documentation/devicetree/bindings/dma/arm-pl330.txt b/Documentation/devicetree/bindings/dma/arm-pl330.txt new file mode 100644 index 000000000000..a4cd273b2a67 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/arm-pl330.txt @@ -0,0 +1,30 @@ +* ARM PrimeCell PL330 DMA Controller + +The ARM PrimeCell PL330 DMA controller can move blocks of memory contents +between memory and peripherals or memory to memory. + +Required properties: + - compatible: should include both "arm,pl330" and "arm,primecell". + - reg: physical base address of the controller and length of memory mapped + region. + - interrupts: interrupt number to the cpu. + +Example: + + pdma0: pdma@12680000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12680000 0x1000>; + interrupts = <99>; + }; + +Client drivers (device nodes requiring dma transfers from dev-to-mem or +mem-to-dev) should specify the DMA channel numbers using a two-value pair +as shown below. + + [property name] = <[phandle of the dma controller] [dma request id]>; + + where 'dma request id' is the dma request number which is connected + to the client controller. The 'property name' is recommended to be + of the form <name>-dma-channel. + + Example: tx-dma-channel = <&pdma0 12>; diff --git a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt new file mode 100644 index 000000000000..8f50fe5e6c42 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt @@ -0,0 +1,40 @@ +Samsung Exynos4 GPIO Controller + +Required properties: +- compatible: Compatible property value should be "samsung,exynos4-gpio>". + +- reg: Physical base address of the controller and length of memory mapped + region. + +- #gpio-cells: Should be 4. The syntax of the gpio specifier used by client nodes + should be the following with values derived from the SoC user manual. + <[phandle of the gpio controller node] + [pin number within the gpio controller] + [mux function] + [pull up/down] + [drive strength]> + + Values for gpio specifier: + - Pin number: is a value between 0 to 7. + - Pull Up/Down: 0 - Pull Up/Down Disabled. + 1 - Pull Down Enabled. + 3 - Pull Up Enabled. + - Drive Strength: 0 - 1x, + 1 - 3x, + 2 - 2x, + 3 - 4x + +- gpio-controller: Specifies that the node is a gpio controller. +- #address-cells: should be 1. +- #size-cells: should be 1. + +Example: + + gpa0: gpio-controller@11400000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "samsung,exynos4-gpio"; + reg = <0x11400000 0x20>; + #gpio-cells = <4>; + gpio-controller; + }; diff --git a/Documentation/devicetree/bindings/input/samsung-keypad.txt b/Documentation/devicetree/bindings/input/samsung-keypad.txt new file mode 100644 index 000000000000..ce3e394c0e64 --- /dev/null +++ b/Documentation/devicetree/bindings/input/samsung-keypad.txt @@ -0,0 +1,88 @@ +* Samsung's Keypad Controller device tree bindings + +Samsung's Keypad controller is used to interface a SoC with a matrix-type +keypad device. The keypad controller supports multiple row and column lines. +A key can be placed at each intersection of a unique row and a unique column. +The keypad controller can sense a key-press and key-release and report the +event using a interrupt to the cpu. + +Required SoC Specific Properties: +- compatible: should be one of the following + - "samsung,s3c6410-keypad": For controllers compatible with s3c6410 keypad + controller. + - "samsung,s5pv210-keypad": For controllers compatible with s5pv210 keypad + controller. + +- reg: physical base address of the controller and length of memory mapped + region. + +- interrupts: The interrupt number to the cpu. + +Required Board Specific Properties: +- samsung,keypad-num-rows: Number of row lines connected to the keypad + controller. + +- samsung,keypad-num-columns: Number of column lines connected to the + keypad controller. + +- row-gpios: List of gpios used as row lines. The gpio specifier for + this property depends on the gpio controller to which these row lines + are connected. + +- col-gpios: List of gpios used as column lines. The gpio specifier for + this property depends on the gpio controller to which these column + lines are connected. + +- Keys represented as child nodes: Each key connected to the keypad + controller is represented as a child node to the keypad controller + device node and should include the following properties. + - keypad,row: the row number to which the key is connected. + - keypad,column: the column number to which the key is connected. + - linux,code: the key-code to be reported when the key is pressed + and released. + +Optional Properties specific to linux: +- linux,keypad-no-autorepeat: do no enable autorepeat feature. +- linux,keypad-wakeup: use any event on keypad as wakeup event. + + +Example: + keypad@100A0000 { + compatible = "samsung,s5pv210-keypad"; + reg = <0x100A0000 0x100>; + interrupts = <173>; + samsung,keypad-num-rows = <2>; + samsung,keypad-num-columns = <8>; + linux,input-no-autorepeat; + linux,input-wakeup; + + row-gpios = <&gpx2 0 3 3 0 + &gpx2 1 3 3 0>; + + col-gpios = <&gpx1 0 3 0 0 + &gpx1 1 3 0 0 + &gpx1 2 3 0 0 + &gpx1 3 3 0 0 + &gpx1 4 3 0 0 + &gpx1 5 3 0 0 + &gpx1 6 3 0 0 + &gpx1 7 3 0 0>; + + key_1 { + keypad,row = <0>; + keypad,column = <3>; + linux,code = <2>; + }; + + key_2 { + keypad,row = <0>; + keypad,column = <4>; + linux,code = <3>; + }; + + key_3 { + keypad,row = <0>; + keypad,column = <5>; + linux,code = <4>; + }; + }; diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt new file mode 100644 index 000000000000..90ec45fd33ec --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt @@ -0,0 +1,20 @@ +* Samsung's S3C Real Time Clock controller + +Required properties: +- compatible: should be one of the following. + * "samsung,s3c2410-rtc" - for controllers compatible with s3c2410 rtc. + * "samsung,s3c6410-rtc" - for controllers compatible with s3c6410 rtc. +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: Two interrupt numbers to the cpu should be specified. First + interrupt number is the rtc alarm interupt and second interrupt number + is the rtc tick interrupt. The number of cells representing a interrupt + depends on the parent interrupt controller. + +Example: + + rtc@10070000 { + compatible = "samsung,s3c6410-rtc"; + reg = <0x10070000 0x100>; + interrupts = <44 0 45 0>; + }; diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.txt b/Documentation/devicetree/bindings/serial/samsung_uart.txt new file mode 100644 index 000000000000..2c8a17cf5cb5 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/samsung_uart.txt @@ -0,0 +1,14 @@ +* Samsung's UART Controller + +The Samsung's UART controller is used for interfacing SoC with serial communicaion +devices. + +Required properties: +- compatible: should be + - "samsung,exynos4210-uart", for UART's compatible with Exynos4210 uart ports. + +- reg: base physical address of the controller and length of memory mapped + region. + +- interrupts: interrupt number to the cpu. The interrupt specifier format depends + on the interrupt controller parent. diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index 7945b0bd35e2..e2a4b5287361 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -1100,6 +1100,15 @@ emulate them efficiently. The fields in each entry are defined as follows: eax, ebx, ecx, edx: the values returned by the cpuid instruction for this function/index combination +The TSC deadline timer feature (CPUID leaf 1, ecx[24]) is always returned +as false, since the feature depends on KVM_CREATE_IRQCHIP for local APIC +support. Instead it is reported via + + ioctl(KVM_CHECK_EXTENSION, KVM_CAP_TSC_DEADLINE_TIMER) + +if that returns true and you use KVM_CREATE_IRQCHIP, or if you emulate the +feature in userspace, then you can enable the feature for KVM_SET_CPUID2. + 4.47 KVM_PPC_GET_PVINFO Capability: KVM_CAP_PPC_GET_PVINFO @@ -1151,6 +1160,13 @@ following flags are specified: /* Depends on KVM_CAP_IOMMU */ #define KVM_DEV_ASSIGN_ENABLE_IOMMU (1 << 0) +The KVM_DEV_ASSIGN_ENABLE_IOMMU flag is a mandatory option to ensure +isolation of the device. Usages not specifying this flag are deprecated. + +Only PCI header type 0 devices with PCI BAR resources are supported by +device assignment. The user requesting this ioctl must have read/write +access to the PCI sysfs resource files associated with the device. + 4.49 KVM_DEASSIGN_PCI_DEVICE Capability: KVM_CAP_DEVICE_DEASSIGNMENT diff --git a/MAINTAINERS b/MAINTAINERS index 94f3eb76c649..b26219050ff1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2693,7 +2693,7 @@ FIREWIRE SUBSYSTEM M: Stefan Richter <stefanr@s5r6.in-berlin.de> L: linux1394-devel@lists.sourceforge.net W: http://ieee1394.wiki.kernel.org/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394.git S: Maintained F: drivers/firewire/ F: include/linux/firewire*.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 2deb911d59f4..ff7416f8eb83 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -258,6 +258,7 @@ config ARCH_INTEGRATOR select ARCH_HAS_CPUFREQ select CLKDEV_LOOKUP select HAVE_MACH_CLKDEV + select HAVE_TCM select ICST select GENERIC_CLOCKEVENTS select PLAT_VERSATILE @@ -341,10 +342,12 @@ config ARCH_HIGHBANK select ARM_AMBA select ARM_GIC select ARM_TIMER_SP804 + select CACHE_L2X0 select CLKDEV_LOOKUP select CPU_V7 select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU + select HAVE_SMP select USE_OF help Support for the Calxeda Highbank SoC based boards. @@ -362,6 +365,7 @@ config ARCH_CNS3XXX select CPU_V6K select GENERIC_CLOCKEVENTS select ARM_GIC + select MIGHT_HAVE_CACHE_L2X0 select MIGHT_HAVE_PCI select PCI_DOMAINS if PCI help @@ -382,6 +386,7 @@ config ARCH_PRIMA2 select GENERIC_CLOCKEVENTS select CLKDEV_LOOKUP select GENERIC_IRQ_CHIP + select MIGHT_HAVE_CACHE_L2X0 select USE_OF select ZONE_DMA help @@ -634,6 +639,8 @@ config ARCH_TEGRA select GENERIC_GPIO select HAVE_CLK select HAVE_SCHED_CLOCK + select HAVE_SMP + select MIGHT_HAVE_CACHE_L2X0 select ARCH_HAS_CPUFREQ help This enables support for NVIDIA Tegra based systems (Tegra APX, @@ -704,7 +711,9 @@ config ARCH_SHMOBILE select HAVE_CLK select CLKDEV_LOOKUP select HAVE_MACH_CLKDEV + select HAVE_SMP select GENERIC_CLOCKEVENTS + select MIGHT_HAVE_CACHE_L2X0 select NO_IOPORT select SPARSE_IRQ select MULTI_IRQ_HANDLER @@ -895,6 +904,8 @@ config ARCH_U8500 select CLKDEV_LOOKUP select ARCH_REQUIRE_GPIOLIB select ARCH_HAS_CPUFREQ + select HAVE_SMP + select MIGHT_HAVE_CACHE_L2X0 help Support for ST-Ericsson's Ux500 architecture @@ -905,6 +916,7 @@ config ARCH_NOMADIK select CPU_ARM926T select CLKDEV_LOOKUP select GENERIC_CLOCKEVENTS + select MIGHT_HAVE_CACHE_L2X0 select ARCH_REQUIRE_GPIOLIB help Support for the Nomadik platform by ST-Ericsson @@ -964,6 +976,7 @@ config ARCH_ZYNQ select ARM_GIC select ARM_AMBA select ICST + select MIGHT_HAVE_CACHE_L2X0 select USE_OF help Support for Xilinx Zynq ARM Cortex A9 Platform @@ -1114,6 +1127,11 @@ config ARM_TIMER_SP804 source arch/arm/mm/Kconfig +config ARM_NR_BANKS + int + default 16 if ARCH_EP93XX + default 8 + config IWMMXT bool "Enable iWMMXt support" depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 @@ -1234,7 +1252,7 @@ config PL310_ERRATA_588369 config ARM_ERRATA_720789 bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID" - depends on CPU_V7 && SMP + depends on CPU_V7 help This option enables the workaround for the 720789 Cortex-A9 (prior to r2p0) erratum. A faulty ASID can be sent to the other CPUs for the @@ -1270,7 +1288,7 @@ config ARM_ERRATA_743622 config ARM_ERRATA_751472 bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation" - depends on CPU_V7 && SMP + depends on CPU_V7 help This option enables the workaround for the 751472 Cortex-A9 (prior to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the @@ -1423,14 +1441,20 @@ menu "Kernel Features" source "kernel/time/Kconfig" +config HAVE_SMP + bool + help + This option should be selected by machines which have an SMP- + capable CPU. + + The only effect of this option is to make the SMP-related + options available to the user for configuration. + config SMP bool "Symmetric Multi-Processing" depends on CPU_V6K || CPU_V7 depends on GENERIC_CLOCKEVENTS - depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \ - MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \ - ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \ - ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE || ARCH_HIGHBANK || SOC_IMX6Q + depends on HAVE_SMP depends on MMU select USE_GENERIC_SMP_HELPERS select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP @@ -1548,6 +1572,16 @@ config LOCAL_TIMERS accounting to be spread across the timer interval, preventing a "thundering herd" at every timer tick. +config ARCH_NR_GPIO + int + default 1024 if ARCH_SHMOBILE || ARCH_TEGRA + default 350 if ARCH_U8500 + default 0 + help + Maximum number of GPIOs in the system. + + If unsure, leave the default value. + source kernel/Kconfig.preempt config HZ diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 21f56ff32797..cf0a64ce4b83 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -126,7 +126,8 @@ ccflags-y := -fpic -fno-builtin -I$(obj) asflags-y := -Wa,-march=all # Supply kernel BSS size to the decompressor via a linker symbol. -KBSS_SZ = $(shell size $(obj)/../../../../vmlinux | awk 'END{print $$3}') +KBSS_SZ = $(shell $(CROSS_COMPILE)size $(obj)/../../../../vmlinux | \ + awk 'END{print $$3}') LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ) # Supply ZRELADDR to the decompressor via a linker symbol. ifneq ($(CONFIG_AUTO_ZRELADDR),y) diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts new file mode 100644 index 000000000000..b8c476384eef --- /dev/null +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -0,0 +1,137 @@ +/* + * Samsung's Exynos4210 based Origen board device tree source + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2010-2011 Linaro Ltd. + * www.linaro.org + * + * Device tree source file for Insignal's Origen board which is based on + * Samsung's Exynos4210 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +/include/ "exynos4210.dtsi" + +/ { + model = "Insignal Origen evaluation board based on Exynos4210"; + compatible = "insignal,origen", "samsung,exynos4210"; + + memory { + reg = <0x40000000 0x40000000>; + }; + + chosen { + bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc"; + }; + + sdhci@12530000 { + samsung,sdhci-bus-width = <4>; + linux,mmc_cap_4_bit_data; + samsung,sdhci-cd-internal; + gpio-cd = <&gpk2 2 2 3 3>; + gpios = <&gpk2 0 2 0 3>, + <&gpk2 1 2 0 3>, + <&gpk2 3 2 3 3>, + <&gpk2 4 2 3 3>, + <&gpk2 5 2 3 3>, + <&gpk2 6 2 3 3>; + }; + + sdhci@12510000 { + samsung,sdhci-bus-width = <4>; + linux,mmc_cap_4_bit_data; + samsung,sdhci-cd-internal; + gpio-cd = <&gpk0 2 2 3 3>; + gpios = <&gpk0 0 2 0 3>, + <&gpk0 1 2 0 3>, + <&gpk0 3 2 3 3>, + <&gpk0 4 2 3 3>, + <&gpk0 5 2 3 3>, + <&gpk0 6 2 3 3>; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + up { + label = "Up"; + gpios = <&gpx2 0 0 0 2>; + linux,code = <103>; + }; + + down { + label = "Down"; + gpios = <&gpx2 1 0 0 2>; + linux,code = <108>; + }; + + back { + label = "Back"; + gpios = <&gpx1 7 0 0 2>; + linux,code = <158>; + }; + + home { + label = "Home"; + gpios = <&gpx1 6 0 0 2>; + linux,code = <102>; + }; + + menu { + label = "Menu"; + gpios = <&gpx1 5 0 0 2>; + linux,code = <139>; + }; + }; + + keypad@100A0000 { + status = "disabled"; + }; + + sdhci@12520000 { + status = "disabled"; + }; + + sdhci@12540000 { + status = "disabled"; + }; + + i2c@13860000 { + status = "disabled"; + }; + + i2c@13870000 { + status = "disabled"; + }; + + i2c@13880000 { + status = "disabled"; + }; + + i2c@13890000 { + status = "disabled"; + }; + + i2c@138A0000 { + status = "disabled"; + }; + + i2c@138B0000 { + status = "disabled"; + }; + + i2c@138C0000 { + status = "disabled"; + }; + + i2c@138D0000 { + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts new file mode 100644 index 000000000000..27afc8e535ca --- /dev/null +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -0,0 +1,182 @@ +/* + * Samsung's Exynos4210 based SMDKV310 board device tree source + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2010-2011 Linaro Ltd. + * www.linaro.org + * + * Device tree source file for Samsung's SMDKV310 board which is based on + * Samsung's Exynos4210 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +/include/ "exynos4210.dtsi" + +/ { + model = "Samsung smdkv310 evaluation board based on Exynos4210"; + compatible = "samsung,smdkv310", "samsung,exynos4210"; + + memory { + reg = <0x40000000 0x80000000>; + }; + + chosen { + bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc"; + }; + + sdhci@12530000 { + samsung,sdhci-bus-width = <4>; + linux,mmc_cap_4_bit_data; + samsung,sdhci-cd-internal; + gpio-cd = <&gpk2 2 2 3 3>; + gpios = <&gpk2 0 2 0 3>, + <&gpk2 1 2 0 3>, + <&gpk2 3 2 3 3>, + <&gpk2 4 2 3 3>, + <&gpk2 5 2 3 3>, + <&gpk2 6 2 3 3>; + }; + + keypad@100A0000 { + samsung,keypad-num-rows = <2>; + samsung,keypad-num-columns = <8>; + linux,keypad-no-autorepeat; + linux,keypad-wakeup; + + row-gpios = <&gpx2 0 3 3 0>, + <&gpx2 1 3 3 0>; + + col-gpios = <&gpx1 0 3 0 0>, + <&gpx1 1 3 0 0>, + <&gpx1 2 3 0 0>, + <&gpx1 3 3 0 0>, + <&gpx1 4 3 0 0>, + <&gpx1 5 3 0 0>, + <&gpx1 6 3 0 0>, + <&gpx1 7 3 0 0>; + + key_1 { + keypad,row = <0>; + keypad,column = <3>; + linux,code = <2>; + }; + + key_2 { + keypad,row = <0>; + keypad,column = <4>; + linux,code = <3>; + }; + + key_3 { + keypad,row = <0>; + keypad,column = <5>; + linux,code = <4>; + }; + + key_4 { + keypad,row = <0>; + keypad,column = <6>; + linux,code = <5>; + }; + + key_5 { + keypad,row = <0>; + keypad,column = <7>; + linux,code = <6>; + }; + + key_a { + keypad,row = <1>; + keypad,column = <3>; + linux,code = <30>; + }; + + key_b { + keypad,row = <1>; + keypad,column = <4>; + linux,code = <48>; + }; + + key_c { + keypad,row = <1>; + keypad,column = <5>; + linux,code = <46>; + }; + + key_d { + keypad,row = <1>; + keypad,column = <6>; + linux,code = <32>; + }; + + key_e { + keypad,row = <1>; + keypad,column = <7>; + linux,code = <18>; + }; + }; + + i2c@13860000 { + #address-cells = <1>; + #size-cells = <0>; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <20000>; + gpios = <&gpd1 0 2 3 0>, + <&gpd1 1 2 3 0>; + + eeprom@50 { + compatible = "samsung,24ad0xd1"; + reg = <0x50>; + }; + + eeprom@52 { + compatible = "samsung,24ad0xd1"; + reg = <0x52>; + }; + }; + + sdhci@12510000 { + status = "disabled"; + }; + + sdhci@12520000 { + status = "disabled"; + }; + + sdhci@12540000 { + status = "disabled"; + }; + + i2c@13870000 { + status = "disabled"; + }; + + i2c@13880000 { + status = "disabled"; + }; + + i2c@13890000 { + status = "disabled"; + }; + + i2c@138A0000 { + status = "disabled"; + }; + + i2c@138B0000 { + status = "disabled"; + }; + + i2c@138C0000 { + status = "disabled"; + }; + + i2c@138D0000 { + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi new file mode 100644 index 000000000000..63d7578856c1 --- /dev/null +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -0,0 +1,397 @@ +/* + * Samsung's Exynos4210 SoC device tree source + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2010-2011 Linaro Ltd. + * www.linaro.org + * + * Samsung's Exynos4210 SoC device nodes are listed in this file. Exynos4210 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * Exynos4210 SoC. As device tree coverage for Exynos4210 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/include/ "skeleton.dtsi" + +/ { + compatible = "samsung,exynos4210"; + interrupt-parent = <&gic>; + + gic:interrupt-controller@10490000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x10490000 0x1000>, <0x10480000 0x100>; + }; + + watchdog@10060000 { + compatible = "samsung,s3c2410-wdt"; + reg = <0x10060000 0x100>; + interrupts = <0 43 0>; + }; + + rtc@10070000 { + compatible = "samsung,s3c6410-rtc"; + reg = <0x10070000 0x100>; + interrupts = <0 44 0>, <0 45 0>; + }; + + keypad@100A0000 { + compatible = "samsung,s5pv210-keypad"; + reg = <0x100A0000 0x100>; + interrupts = <0 109 0>; + }; + + sdhci@12510000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12510000 0x100>; + interrupts = <0 73 0>; + }; + + sdhci@12520000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12520000 0x100>; + interrupts = <0 74 0>; + }; + + sdhci@12530000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12530000 0x100>; + interrupts = <0 75 0>; + }; + + sdhci@12540000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12540000 0x100>; + interrupts = <0 76 0>; + }; + + serial@13800000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13800000 0x100>; + interrupts = <0 52 0>; + }; + + serial@13810000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13810000 0x100>; + interrupts = <0 53 0>; + }; + + serial@13820000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13820000 0x100>; + interrupts = <0 54 0>; + }; + + serial@13830000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13830000 0x100>; + interrupts = <0 55 0>; + }; + + i2c@13860000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x13860000 0x100>; + interrupts = <0 58 0>; + }; + + i2c@13870000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x13870000 0x100>; + interrupts = <0 59 0>; + }; + + i2c@13880000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x13880000 0x100>; + interrupts = <0 60 0>; + }; + + i2c@13890000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x13890000 0x100>; + interrupts = <0 61 0>; + }; + + i2c@138A0000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x138A0000 0x100>; + interrupts = <0 62 0>; + }; + + i2c@138B0000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x138B0000 0x100>; + interrupts = <0 63 0>; + }; + + i2c@138C0000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x138C0000 0x100>; + interrupts = <0 64 0>; + }; + + i2c@138D0000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x138D0000 0x100>; + interrupts = <0 65 0>; + }; + + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,amba-bus"; + interrupt-parent = <&gic>; + ranges; + + pdma0: pdma@12680000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12680000 0x1000>; + interrupts = <0 35 0>; + }; + + pdma1: pdma@12690000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12690000 0x1000>; + interrupts = <0 36 0>; + }; + }; + + gpio-controllers { + #address-cells = <1>; + #size-cells = <1>; + gpio-controller; + ranges; + + gpa0: gpio-controller@11400000 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400000 0x20>; + #gpio-cells = <4>; + }; + + gpa1: gpio-controller@11400020 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400020 0x20>; + #gpio-cells = <4>; + }; + + gpb: gpio-controller@11400040 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400040 0x20>; + #gpio-cells = <4>; + }; + + gpc0: gpio-controller@11400060 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400060 0x20>; + #gpio-cells = <4>; + }; + + gpc1: gpio-controller@11400080 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400080 0x20>; + #gpio-cells = <4>; + }; + + gpd0: gpio-controller@114000A0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x114000A0 0x20>; + #gpio-cells = <4>; + }; + + gpd1: gpio-controller@114000C0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x114000C0 0x20>; + #gpio-cells = <4>; + }; + + gpe0: gpio-controller@114000E0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x114000E0 0x20>; + #gpio-cells = <4>; + }; + + gpe1: gpio-controller@11400100 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400100 0x20>; + #gpio-cells = <4>; + }; + + gpe2: gpio-controller@11400120 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400120 0x20>; + #gpio-cells = <4>; + }; + + gpe3: gpio-controller@11400140 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400140 0x20>; + #gpio-cells = <4>; + }; + + gpe4: gpio-controller@11400160 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400160 0x20>; + #gpio-cells = <4>; + }; + + gpf0: gpio-controller@11400180 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400180 0x20>; + #gpio-cells = <4>; + }; + + gpf1: gpio-controller@114001A0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x114001A0 0x20>; + #gpio-cells = <4>; + }; + + gpf2: gpio-controller@114001C0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x114001C0 0x20>; + #gpio-cells = <4>; + }; + + gpf3: gpio-controller@114001E0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x114001E0 0x20>; + #gpio-cells = <4>; + }; + + gpj0: gpio-controller@11000000 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000000 0x20>; + #gpio-cells = <4>; + }; + + gpj1: gpio-controller@11000020 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000020 0x20>; + #gpio-cells = <4>; + }; + + gpk0: gpio-controller@11000040 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000040 0x20>; + #gpio-cells = <4>; + }; + + gpk1: gpio-controller@11000060 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000060 0x20>; + #gpio-cells = <4>; + }; + + gpk2: gpio-controller@11000080 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000080 0x20>; + #gpio-cells = <4>; + }; + + gpk3: gpio-controller@110000A0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x110000A0 0x20>; + #gpio-cells = <4>; + }; + + gpl0: gpio-controller@110000C0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x110000C0 0x20>; + #gpio-cells = <4>; + }; + + gpl1: gpio-controller@110000E0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x110000E0 0x20>; + #gpio-cells = <4>; + }; + + gpl2: gpio-controller@11000100 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000100 0x20>; + #gpio-cells = <4>; + }; + + gpy0: gpio-controller@11000120 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000120 0x20>; + #gpio-cells = <4>; + }; + + gpy1: gpio-controller@11000140 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000140 0x20>; + #gpio-cells = <4>; + }; + + gpy2: gpio-controller@11000160 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000160 0x20>; + #gpio-cells = <4>; + }; + + gpy3: gpio-controller@11000180 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000180 0x20>; + #gpio-cells = <4>; + }; + + gpy4: gpio-controller@110001A0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x110001A0 0x20>; + #gpio-cells = <4>; + }; + + gpy5: gpio-controller@110001C0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x110001C0 0x20>; + #gpio-cells = <4>; + }; + + gpy6: gpio-controller@110001E0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x110001E0 0x20>; + #gpio-cells = <4>; + }; + + gpx0: gpio-controller@11000C00 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000C00 0x20>; + #gpio-cells = <4>; + }; + + gpx1: gpio-controller@11000C20 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000C20 0x20>; + #gpio-cells = <4>; + }; + + gpx2: gpio-controller@11000C40 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000C40 0x20>; + #gpio-cells = <4>; + }; + + gpx3: gpio-controller@11000C60 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000C60 0x20>; + #gpio-cells = <4>; + }; + + gpz: gpio-controller@03860000 { + compatible = "samsung,exynos4-gpio"; + reg = <0x03860000 0x20>; + #gpio-cells = <4>; + }; + }; +}; diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c index f407a6b35d3d..d8e44a43047c 100644 --- a/arch/arm/common/pl330.c +++ b/arch/arm/common/pl330.c @@ -221,17 +221,6 @@ */ #define MCODE_BUFF_PER_REQ 256 -/* - * Mark a _pl330_req as free. - * We do it by writing DMAEND as the first instruction - * because no valid request is going to have DMAEND as - * its first instruction to execute. - */ -#define MARK_FREE(req) do { \ - _emit_END(0, (req)->mc_cpu); \ - (req)->mc_len = 0; \ - } while (0) - /* If the _pl330_req is available to the client */ #define IS_FREE(req) (*((u8 *)((req)->mc_cpu)) == CMD_DMAEND) @@ -301,8 +290,10 @@ struct pl330_thread { struct pl330_dmac *dmac; /* Only two at a time */ struct _pl330_req req[2]; - /* Index of the last submitted request */ + /* Index of the last enqueued request */ unsigned lstenq; + /* Index of the last submitted request or -1 if the DMA is stopped */ + int req_running; }; enum pl330_dmac_state { @@ -778,6 +769,22 @@ static inline void _execute_DBGINSN(struct pl330_thread *thrd, writel(0, regs + DBGCMD); } +/* + * Mark a _pl330_req as free. + * We do it by writing DMAEND as the first instruction + * because no valid request is going to have DMAEND as + * its first instruction to execute. + */ +static void mark_free(struct pl330_thread *thrd, int idx) +{ + struct _pl330_req *req = &thrd->req[idx]; + + _emit_END(0, req->mc_cpu); + req->mc_len = 0; + + thrd->req_running = -1; +} + static inline u32 _state(struct pl330_thread *thrd) { void __iomem *regs = thrd->dmac->pinfo->base; @@ -836,31 +843,6 @@ static inline u32 _state(struct pl330_thread *thrd) } } -/* If the request 'req' of thread 'thrd' is currently active */ -static inline bool _req_active(struct pl330_thread *thrd, - struct _pl330_req *req) -{ - void __iomem *regs = thrd->dmac->pinfo->base; - u32 buf = req->mc_bus, pc = readl(regs + CPC(thrd->id)); - - if (IS_FREE(req)) - return false; - - return (pc >= buf && pc <= buf + req->mc_len) ? true : false; -} - -/* Returns 0 if the thread is inactive, ID of active req + 1 otherwise */ -static inline unsigned _thrd_active(struct pl330_thread *thrd) -{ - if (_req_active(thrd, &thrd->req[0])) - return 1; /* First req active */ - - if (_req_active(thrd, &thrd->req[1])) - return 2; /* Second req active */ - - return 0; -} - static void _stop(struct pl330_thread *thrd) { void __iomem *regs = thrd->dmac->pinfo->base; @@ -892,17 +874,22 @@ static bool _trigger(struct pl330_thread *thrd) struct _arg_GO go; unsigned ns; u8 insn[6] = {0, 0, 0, 0, 0, 0}; + int idx; /* Return if already ACTIVE */ if (_state(thrd) != PL330_STATE_STOPPED) return true; - if (!IS_FREE(&thrd->req[1 - thrd->lstenq])) - req = &thrd->req[1 - thrd->lstenq]; - else if (!IS_FREE(&thrd->req[thrd->lstenq])) - req = &thrd->req[thrd->lstenq]; - else - req = NULL; + idx = 1 - thrd->lstenq; + if (!IS_FREE(&thrd->req[idx])) + req = &thrd->req[idx]; + else { + idx = thrd->lstenq; + if (!IS_FREE(&thrd->req[idx])) + req = &thrd->req[idx]; + else + req = NULL; + } /* Return if no request */ if (!req || !req->r) @@ -933,6 +920,8 @@ static bool _trigger(struct pl330_thread *thrd) /* Only manager can execute GO */ _execute_DBGINSN(thrd, insn, true); + thrd->req_running = idx; + return true; } @@ -1382,8 +1371,8 @@ static void pl330_dotask(unsigned long data) thrd->req[0].r = NULL; thrd->req[1].r = NULL; - MARK_FREE(&thrd->req[0]); - MARK_FREE(&thrd->req[1]); + mark_free(thrd, 0); + mark_free(thrd, 1); /* Clear the reset flag */ pl330->dmac_tbd.reset_chan &= ~(1 << i); @@ -1461,14 +1450,12 @@ int pl330_update(const struct pl330_info *pi) thrd = &pl330->channels[id]; - active = _thrd_active(thrd); - if (!active) /* Aborted */ + active = thrd->req_running; + if (active == -1) /* Aborted */ continue; - active -= 1; - rqdone = &thrd->req[active]; - MARK_FREE(rqdone); + mark_free(thrd, active); /* Get going again ASAP */ _start(thrd); @@ -1480,13 +1467,19 @@ int pl330_update(const struct pl330_info *pi) /* Now that we are in no hurry, do the callbacks */ while (!list_empty(&pl330->req_done)) { + struct pl330_req *r; + rqdone = container_of(pl330->req_done.next, struct _pl330_req, rqd); list_del_init(&rqdone->rqd); + /* Detach the req */ + r = rqdone->r; + rqdone->r = NULL; + spin_unlock_irqrestore(&pl330->lock, flags); - _callback(rqdone->r, PL330_ERR_NONE); + _callback(r, PL330_ERR_NONE); spin_lock_irqsave(&pl330->lock, flags); } @@ -1509,7 +1502,7 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op) struct pl330_thread *thrd = ch_id; struct pl330_dmac *pl330; unsigned long flags; - int ret = 0, active; + int ret = 0, active = thrd->req_running; if (!thrd || thrd->free || thrd->dmac->state == DYING) return -EINVAL; @@ -1525,28 +1518,24 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op) thrd->req[0].r = NULL; thrd->req[1].r = NULL; - MARK_FREE(&thrd->req[0]); - MARK_FREE(&thrd->req[1]); + mark_free(thrd, 0); + mark_free(thrd, 1); break; case PL330_OP_ABORT: - active = _thrd_active(thrd); - /* Make sure the channel is stopped */ _stop(thrd); /* ABORT is only for the active req */ - if (!active) + if (active == -1) break; - active--; - thrd->req[active].r = NULL; - MARK_FREE(&thrd->req[active]); + mark_free(thrd, active); /* Start the next */ case PL330_OP_START: - if (!_thrd_active(thrd) && !_start(thrd)) + if ((active == -1) && !_start(thrd)) ret = -EIO; break; @@ -1587,14 +1576,13 @@ int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus) else pstatus->faulting = false; - active = _thrd_active(thrd); + active = thrd->req_running; - if (!active) { + if (active == -1) { /* Indicate that the thread is not running */ pstatus->top_req = NULL; pstatus->wait_req = NULL; } else { - active--; pstatus->top_req = thrd->req[active].r; pstatus->wait_req = !IS_FREE(&thrd->req[1 - active]) ? thrd->req[1 - active].r : NULL; @@ -1659,9 +1647,9 @@ void *pl330_request_channel(const struct pl330_info *pi) thrd->free = false; thrd->lstenq = 1; thrd->req[0].r = NULL; - MARK_FREE(&thrd->req[0]); + mark_free(thrd, 0); thrd->req[1].r = NULL; - MARK_FREE(&thrd->req[1]); + mark_free(thrd, 1); break; } } @@ -1767,14 +1755,14 @@ static inline void _reset_thread(struct pl330_thread *thrd) thrd->req[0].mc_bus = pl330->mcode_bus + (thrd->id * pi->mcbufsz); thrd->req[0].r = NULL; - MARK_FREE(&thrd->req[0]); + mark_free(thrd, 0); thrd->req[1].mc_cpu = thrd->req[0].mc_cpu + pi->mcbufsz / 2; thrd->req[1].mc_bus = thrd->req[0].mc_bus + pi->mcbufsz / 2; thrd->req[1].r = NULL; - MARK_FREE(&thrd->req[1]); + mark_free(thrd, 1); } static int dmac_alloc_threads(struct pl330_dmac *pl330) diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c index 2393b5bc96fa..8794a34eae61 100644 --- a/arch/arm/common/timer-sp.c +++ b/arch/arm/common/timer-sp.c @@ -143,7 +143,6 @@ static int sp804_set_next_event(unsigned long next, } static struct clock_event_device sp804_clockevent = { - .shift = 32, .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .set_mode = sp804_set_mode, .set_next_event = sp804_set_next_event, @@ -169,13 +168,9 @@ void __init sp804_clockevents_init(void __iomem *base, unsigned int irq, clkevt_base = base; clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ); - evt->name = name; evt->irq = irq; - evt->mult = div_sc(rate, NSEC_PER_SEC, evt->shift); - evt->max_delta_ns = clockevent_delta2ns(0xffffffff, evt); - evt->min_delta_ns = clockevent_delta2ns(0xf, evt); setup_irq(irq, &sp804_timer_irq); - clockevents_register_device(evt); + clockevents_config_and_register(evt, rate, 0xf, 0xffffffff); } diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index 77287504c8b4..dcb004a804c7 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -197,8 +197,8 @@ static void __init vic_register(void __iomem *base, unsigned int irq, v->domain.nr_irq = 32; #ifdef CONFIG_OF_IRQ v->domain.of_node = of_node_get(node); - v->domain.ops = &irq_domain_simple_ops; #endif /* CONFIG_OF */ + v->domain.ops = &irq_domain_simple_ops; irq_domain_add(&v->domain); } diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index 11a4192197c8..cf497ce41dfe 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -18,9 +18,10 @@ CONFIG_ARCH_MXC=y CONFIG_ARCH_IMX_V4_V5=y CONFIG_ARCH_MX1ADS=y CONFIG_MACH_SCB9328=y +CONFIG_MACH_APF9328=y CONFIG_MACH_MX21ADS=y CONFIG_MACH_MX25_3DS=y -CONFIG_MACH_EUKREA_CPUIMX25=y +CONFIG_MACH_EUKREA_CPUIMX25SD=y CONFIG_MACH_MX27ADS=y CONFIG_MACH_PCM038=y CONFIG_MACH_CPUIMX27=y @@ -72,17 +73,16 @@ CONFIG_MTD_CFI_GEOMETRY=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_MXC=y CONFIG_MTD_UBI=y CONFIG_MISC_DEVICES=y CONFIG_EEPROM_AT24=y CONFIG_EEPROM_AT25=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_SMC91X=y CONFIG_DM9000=y +CONFIG_SMC91X=y CONFIG_SMC911X=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +CONFIG_SMSC_PHY=y # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set @@ -100,6 +100,7 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_IMX=y CONFIG_SPI=y CONFIG_SPI_IMX=y +CONFIG_SPI_SPIDEV=y CONFIG_W1=y CONFIG_W1_MASTER_MXC=y CONFIG_W1_SLAVE_THERM=y @@ -139,6 +140,7 @@ CONFIG_MMC=y CONFIG_MMC_MXC=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y CONFIG_LEDS_MC13783=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y diff --git a/arch/arm/include/asm/bug.h b/arch/arm/include/asm/bug.h index 9abe7a07d5ac..fac79dceb736 100644 --- a/arch/arm/include/asm/bug.h +++ b/arch/arm/include/asm/bug.h @@ -32,7 +32,6 @@ #define __BUG(__file, __line, __value) \ do { \ - BUILD_BUG_ON(sizeof(struct bug_entry) != 12); \ asm volatile("1:\t" BUG_INSTR_TYPE #__value "\n" \ ".pushsection .rodata.str, \"aMS\", %progbits, 1\n" \ "2:\t.asciz " #__file "\n" \ diff --git a/arch/arm/include/asm/edac.h b/arch/arm/include/asm/edac.h new file mode 100644 index 000000000000..0df7a2c1fc3d --- /dev/null +++ b/arch/arm/include/asm/edac.h @@ -0,0 +1,48 @@ +/* + * Copyright 2011 Calxeda, Inc. + * Based on PPC version Copyright 2007 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef ASM_EDAC_H +#define ASM_EDAC_H +/* + * ECC atomic, DMA, SMP and interrupt safe scrub function. + * Implements the per arch atomic_scrub() that EDAC use for software + * ECC scrubbing. It reads memory and then writes back the original + * value, allowing the hardware to detect and correct memory errors. + */ +static inline void atomic_scrub(void *va, u32 size) +{ +#if __LINUX_ARM_ARCH__ >= 6 + unsigned int *virt_addr = va; + unsigned int temp, temp2; + unsigned int i; + + for (i = 0; i < size / sizeof(*virt_addr); i++, virt_addr++) { + /* Very carefully read and write to memory atomically + * so we are interrupt, DMA and SMP safe. + */ + __asm__ __volatile__("\n" + "1: ldrex %0, [%2]\n" + " strex %1, %0, [%2]\n" + " teq %1, #0\n" + " bne 1b\n" + : "=&r"(temp), "=&r"(temp2) + : "r"(virt_addr) + : "cc"); + } +#endif +} + +#endif diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h index 11ad0bfbb0ad..7151753b0989 100644 --- a/arch/arm/include/asm/gpio.h +++ b/arch/arm/include/asm/gpio.h @@ -1,6 +1,10 @@ #ifndef _ARCH_ARM_GPIO_H #define _ARCH_ARM_GPIO_H +#if CONFIG_ARCH_NR_GPIO > 0 +#define ARCH_NR_GPIO CONFIG_ARCH_NR_GPIO +#endif + /* not all ARM platforms necessarily support this API ... */ #include <mach/gpio.h> diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h index ddf07a92a6c8..436e60b2cf7a 100644 --- a/arch/arm/include/asm/hardirq.h +++ b/arch/arm/include/asm/hardirq.h @@ -27,23 +27,6 @@ u64 smp_irq_stat_cpu(unsigned int cpu); #define arch_irq_stat_cpu smp_irq_stat_cpu -#if NR_IRQS > 512 -#define HARDIRQ_BITS 10 -#elif NR_IRQS > 256 -#define HARDIRQ_BITS 9 -#else -#define HARDIRQ_BITS 8 -#endif - -/* - * The hardirq mask has to be large enough to have space - * for potentially all IRQ sources in the system nesting - * on a single CPU: - */ -#if (1 << HARDIRQ_BITS) < NR_IRQS -# error HARDIRQ_BITS is too low! -#endif - #define __ARCH_IRQ_EXIT_IRQS_DISABLED 1 #endif /* __ASM_HARDIRQ_H */ diff --git a/arch/arm/include/asm/opcodes.h b/arch/arm/include/asm/opcodes.h new file mode 100644 index 000000000000..c0efdd60966f --- /dev/null +++ b/arch/arm/include/asm/opcodes.h @@ -0,0 +1,20 @@ +/* + * arch/arm/include/asm/opcodes.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARM_OPCODES_H +#define __ASM_ARM_OPCODES_H + +#ifndef __ASSEMBLY__ +extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr); +#endif + +#define ARM_OPCODE_CONDTEST_FAIL 0 +#define ARM_OPCODE_CONDTEST_PASS 1 +#define ARM_OPCODE_CONDTEST_UNCOND 2 + +#endif /* __ASM_ARM_OPCODES_H */ diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 3f2f0eb76211..f66626d71e7d 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -42,13 +42,6 @@ #define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)) #define VMALLOC_END 0xff000000UL -/* This is a temporary hack until shmobile's DMA area size is sorted out */ -#ifdef CONFIG_ARCH_SHMOBILE -#warning "SH-Mobile's consistent DMA size conflicts with VMALLOC_END by 144MB" -#undef VMALLOC_END -#define VMALLOC_END 0xF6000000UL -#endif - #define LIBRARY_TEXT_START 0x0c000000 #ifndef __ASSEMBLY__ @@ -306,6 +299,7 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) * We provide our own arch_get_unmapped_area to cope with VIPT caches. */ #define HAVE_ARCH_UNMAPPED_AREA +#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN /* * remap a physical page `pfn' of size `size' with page protection `prot' diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index b2d9df5667af..ce280b8d613c 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -123,6 +123,8 @@ static inline void prefetch(const void *ptr) #endif +#define HAVE_ARCH_PICK_MMAP_LAYOUT + #endif #endif /* __ASM_ARM_PROCESSOR_H */ diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h index c8e6ddf3e860..e3f757263438 100644 --- a/arch/arm/include/asm/sched_clock.h +++ b/arch/arm/include/asm/sched_clock.h @@ -8,113 +8,7 @@ #ifndef ASM_SCHED_CLOCK #define ASM_SCHED_CLOCK -#include <linux/kernel.h> -#include <linux/types.h> - -struct clock_data { - u64 epoch_ns; - u32 epoch_cyc; - u32 epoch_cyc_copy; - u32 mult; - u32 shift; -}; - -#define DEFINE_CLOCK_DATA(name) struct clock_data name - -static inline u64 cyc_to_ns(u64 cyc, u32 mult, u32 shift) -{ - return (cyc * mult) >> shift; -} - -/* - * Atomically update the sched_clock epoch. Your update callback will - * be called from a timer before the counter wraps - read the current - * counter value, and call this function to safely move the epochs - * forward. Only use this from the update callback. - */ -static inline void update_sched_clock(struct clock_data *cd, u32 cyc, u32 mask) -{ - unsigned long flags; - u64 ns = cd->epoch_ns + - cyc_to_ns((cyc - cd->epoch_cyc) & mask, cd->mult, cd->shift); - - /* - * Write epoch_cyc and epoch_ns in a way that the update is - * detectable in cyc_to_fixed_sched_clock(). - */ - raw_local_irq_save(flags); - cd->epoch_cyc = cyc; - smp_wmb(); - cd->epoch_ns = ns; - smp_wmb(); - cd->epoch_cyc_copy = cyc; - raw_local_irq_restore(flags); -} - -/* - * If your clock rate is known at compile time, using this will allow - * you to optimize the mult/shift loads away. This is paired with - * init_fixed_sched_clock() to ensure that your mult/shift are correct. - */ -static inline unsigned long long cyc_to_fixed_sched_clock(struct clock_data *cd, - u32 cyc, u32 mask, u32 mult, u32 shift) -{ - u64 epoch_ns; - u32 epoch_cyc; - - /* - * Load the epoch_cyc and epoch_ns atomically. We do this by - * ensuring that we always write epoch_cyc, epoch_ns and - * epoch_cyc_copy in strict order, and read them in strict order. - * If epoch_cyc and epoch_cyc_copy are not equal, then we're in - * the middle of an update, and we should repeat the load. - */ - do { - epoch_cyc = cd->epoch_cyc; - smp_rmb(); - epoch_ns = cd->epoch_ns; - smp_rmb(); - } while (epoch_cyc != cd->epoch_cyc_copy); - - return epoch_ns + cyc_to_ns((cyc - epoch_cyc) & mask, mult, shift); -} - -/* - * Otherwise, you need to use this, which will obtain the mult/shift - * from the clock_data structure. Use init_sched_clock() with this. - */ -static inline unsigned long long cyc_to_sched_clock(struct clock_data *cd, - u32 cyc, u32 mask) -{ - return cyc_to_fixed_sched_clock(cd, cyc, mask, cd->mult, cd->shift); -} - -/* - * Initialize the clock data - calculate the appropriate multiplier - * and shift. Also setup a timer to ensure that the epoch is refreshed - * at the appropriate time interval, which will call your update - * handler. - */ -void init_sched_clock(struct clock_data *, void (*)(void), - unsigned int, unsigned long); - -/* - * Use this initialization function rather than init_sched_clock() if - * you're using cyc_to_fixed_sched_clock, which will warn if your - * constants are incorrect. - */ -static inline void init_fixed_sched_clock(struct clock_data *cd, - void (*update)(void), unsigned int bits, unsigned long rate, - u32 mult, u32 shift) -{ - init_sched_clock(cd, update, bits, rate); - if (cd->mult != mult || cd->shift != shift) { - pr_crit("sched_clock: wrong multiply/shift: %u>>%u vs calculated %u>>%u\n" - "sched_clock: fix multiply/shift to avoid scheduler hiccups\n", - mult, shift, cd->mult, cd->shift); - } -} - extern void sched_clock_postinit(void); +extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate); #endif diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index 915696dd9c7c..23ebc0c82a39 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -192,11 +192,7 @@ static const struct tagtable __tagtable_##fn __tag = { tag, fn } /* * Memory map description */ -#ifdef CONFIG_ARCH_EP93XX -# define NR_BANKS 16 -#else -# define NR_BANKS 8 -#endif +#define NR_BANKS CONFIG_ARM_NR_BANKS struct membank { phys_addr_t start; diff --git a/arch/arm/include/asm/swab.h b/arch/arm/include/asm/swab.h index 9997ad20eff1..32ee164a2f6b 100644 --- a/arch/arm/include/asm/swab.h +++ b/arch/arm/include/asm/swab.h @@ -24,12 +24,13 @@ #if defined(__KERNEL__) && __LINUX_ARM_ARCH__ >= 6 -static inline __attribute_const__ __u16 __arch_swab16(__u16 x) +static inline __attribute_const__ __u32 __arch_swahb32(__u32 x) { __asm__ ("rev16 %0, %1" : "=r" (x) : "r" (x)); return x; } -#define __arch_swab16 __arch_swab16 +#define __arch_swahb32 __arch_swahb32 +#define __arch_swab16(x) ((__u16)__arch_swahb32(x)) static inline __attribute_const__ __u32 __arch_swab32(__u32 x) { diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 16eed6aebfa4..43b740d0e374 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -13,7 +13,7 @@ CFLAGS_REMOVE_return_address.o = -pg # Object file lists. -obj-y := elf.o entry-armv.o entry-common.o irq.o \ +obj-y := elf.o entry-armv.o entry-common.o irq.o opcodes.o \ process.o ptrace.o return_address.o setup.o signal.o \ sys_arm.o stacktrace.o time.o traps.o diff --git a/arch/arm/kernel/kprobes-test.c b/arch/arm/kernel/kprobes-test.c index e17cdd6d90d8..1862d8f2fd44 100644 --- a/arch/arm/kernel/kprobes-test.c +++ b/arch/arm/kernel/kprobes-test.c @@ -202,6 +202,8 @@ #include <linux/slab.h> #include <linux/kprobes.h> +#include <asm/opcodes.h> + #include "kprobes.h" #include "kprobes-test.h" @@ -1050,65 +1052,9 @@ static int test_instance; static unsigned long test_check_cc(int cc, unsigned long cpsr) { - unsigned long temp; - - switch (cc) { - case 0x0: /* eq */ - return cpsr & PSR_Z_BIT; - - case 0x1: /* ne */ - return (~cpsr) & PSR_Z_BIT; - - case 0x2: /* cs */ - return cpsr & PSR_C_BIT; - - case 0x3: /* cc */ - return (~cpsr) & PSR_C_BIT; - - case 0x4: /* mi */ - return cpsr & PSR_N_BIT; - - case 0x5: /* pl */ - return (~cpsr) & PSR_N_BIT; - - case 0x6: /* vs */ - return cpsr & PSR_V_BIT; - - case 0x7: /* vc */ - return (~cpsr) & PSR_V_BIT; + int ret = arm_check_condition(cc << 28, cpsr); - case 0x8: /* hi */ - cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */ - return cpsr & PSR_C_BIT; - - case 0x9: /* ls */ - cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */ - return (~cpsr) & PSR_C_BIT; - - case 0xa: /* ge */ - cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ - return (~cpsr) & PSR_N_BIT; - - case 0xb: /* lt */ - cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ - return cpsr & PSR_N_BIT; - - case 0xc: /* gt */ - temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ - temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */ - return (~temp) & PSR_N_BIT; - - case 0xd: /* le */ - temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ - temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */ - return temp & PSR_N_BIT; - - case 0xe: /* al */ - case 0xf: /* unconditional */ - return true; - } - BUG(); - return false; + return (ret != ARM_OPCODE_CONDTEST_FAIL); } static int is_last_scenario; @@ -1128,7 +1074,9 @@ static unsigned long test_context_cpsr(int scenario) if (!test_case_is_thumb) { /* Testing ARM code */ - probe_should_run = test_check_cc(current_instruction >> 28, cpsr) != 0; + int cc = current_instruction >> 28; + + probe_should_run = test_check_cc(cc, cpsr) != 0; if (scenario == 15) is_last_scenario = true; diff --git a/arch/arm/kernel/opcodes.c b/arch/arm/kernel/opcodes.c new file mode 100644 index 000000000000..f8179c6a817f --- /dev/null +++ b/arch/arm/kernel/opcodes.c @@ -0,0 +1,72 @@ +/* + * linux/arch/arm/kernel/opcodes.c + * + * A32 condition code lookup feature moved from nwfpe/fpopcode.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <asm/opcodes.h> + +#define ARM_OPCODE_CONDITION_UNCOND 0xf + +/* + * condition code lookup table + * index into the table is test code: EQ, NE, ... LT, GT, AL, NV + * + * bit position in short is condition code: NZCV + */ +static const unsigned short cc_map[16] = { + 0xF0F0, /* EQ == Z set */ + 0x0F0F, /* NE */ + 0xCCCC, /* CS == C set */ + 0x3333, /* CC */ + 0xFF00, /* MI == N set */ + 0x00FF, /* PL */ + 0xAAAA, /* VS == V set */ + 0x5555, /* VC */ + 0x0C0C, /* HI == C set && Z clear */ + 0xF3F3, /* LS == C clear || Z set */ + 0xAA55, /* GE == (N==V) */ + 0x55AA, /* LT == (N!=V) */ + 0x0A05, /* GT == (!Z && (N==V)) */ + 0xF5FA, /* LE == (Z || (N!=V)) */ + 0xFFFF, /* AL always */ + 0 /* NV */ +}; + +/* + * Returns: + * ARM_OPCODE_CONDTEST_FAIL - if condition fails + * ARM_OPCODE_CONDTEST_PASS - if condition passes (including AL) + * ARM_OPCODE_CONDTEST_UNCOND - if NV condition, or separate unconditional + * opcode space from v5 onwards + * + * Code that tests whether a conditional instruction would pass its condition + * check should check that return value == ARM_OPCODE_CONDTEST_PASS. + * + * Code that tests if a condition means that the instruction would be executed + * (regardless of conditional or unconditional) should instead check that the + * return value != ARM_OPCODE_CONDTEST_FAIL. + */ +asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr) +{ + u32 cc_bits = opcode >> 28; + u32 psr_cond = psr >> 28; + unsigned int ret; + + if (cc_bits != ARM_OPCODE_CONDITION_UNCOND) { + if ((cc_map[cc_bits] >> (psr_cond)) & 1) + ret = ARM_OPCODE_CONDTEST_PASS; + else + ret = ARM_OPCODE_CONDTEST_FAIL; + } else { + ret = ARM_OPCODE_CONDTEST_UNCOND; + } + + return ret; +} +EXPORT_SYMBOL_GPL(arm_check_condition); diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c index 9a46370fe9da..5416c7c12528 100644 --- a/arch/arm/kernel/sched_clock.c +++ b/arch/arm/kernel/sched_clock.c @@ -14,61 +14,153 @@ #include <asm/sched_clock.h> +struct clock_data { + u64 epoch_ns; + u32 epoch_cyc; + u32 epoch_cyc_copy; + u32 mult; + u32 shift; +}; + static void sched_clock_poll(unsigned long wrap_ticks); static DEFINE_TIMER(sched_clock_timer, sched_clock_poll, 0, 0); -static void (*sched_clock_update_fn)(void); + +static struct clock_data cd = { + .mult = NSEC_PER_SEC / HZ, +}; + +static u32 __read_mostly sched_clock_mask = 0xffffffff; + +static u32 notrace jiffy_sched_clock_read(void) +{ + return (u32)(jiffies - INITIAL_JIFFIES); +} + +static u32 __read_mostly (*read_sched_clock)(void) = jiffy_sched_clock_read; + +static inline u64 cyc_to_ns(u64 cyc, u32 mult, u32 shift) +{ + return (cyc * mult) >> shift; +} + +static unsigned long long cyc_to_sched_clock(u32 cyc, u32 mask) +{ + u64 epoch_ns; + u32 epoch_cyc; + + /* + * Load the epoch_cyc and epoch_ns atomically. We do this by + * ensuring that we always write epoch_cyc, epoch_ns and + * epoch_cyc_copy in strict order, and read them in strict order. + * If epoch_cyc and epoch_cyc_copy are not equal, then we're in + * the middle of an update, and we should repeat the load. + */ + do { + epoch_cyc = cd.epoch_cyc; + smp_rmb(); + epoch_ns = cd.epoch_ns; + smp_rmb(); + } while (epoch_cyc != cd.epoch_cyc_copy); + + return epoch_ns + cyc_to_ns((cyc - epoch_cyc) & mask, cd.mult, cd.shift); +} + +/* + * Atomically update the sched_clock epoch. + */ +static void notrace update_sched_clock(void) +{ + unsigned long flags; + u32 cyc; + u64 ns; + + cyc = read_sched_clock(); + ns = cd.epoch_ns + + cyc_to_ns((cyc - cd.epoch_cyc) & sched_clock_mask, + cd.mult, cd.shift); + /* + * Write epoch_cyc and epoch_ns in a way that the update is + * detectable in cyc_to_fixed_sched_clock(). + */ + raw_local_irq_save(flags); + cd.epoch_cyc = cyc; + smp_wmb(); + cd.epoch_ns = ns; + smp_wmb(); + cd.epoch_cyc_copy = cyc; + raw_local_irq_restore(flags); +} static void sched_clock_poll(unsigned long wrap_ticks) { mod_timer(&sched_clock_timer, round_jiffies(jiffies + wrap_ticks)); - sched_clock_update_fn(); + update_sched_clock(); } -void __init init_sched_clock(struct clock_data *cd, void (*update)(void), - unsigned int clock_bits, unsigned long rate) +void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate) { unsigned long r, w; u64 res, wrap; char r_unit; - sched_clock_update_fn = update; + BUG_ON(bits > 32); + WARN_ON(!irqs_disabled()); + WARN_ON(read_sched_clock != jiffy_sched_clock_read); + read_sched_clock = read; + sched_clock_mask = (1 << bits) - 1; /* calculate the mult/shift to convert counter ticks to ns. */ - clocks_calc_mult_shift(&cd->mult, &cd->shift, rate, NSEC_PER_SEC, 0); + clocks_calc_mult_shift(&cd.mult, &cd.shift, rate, NSEC_PER_SEC, 0); r = rate; if (r >= 4000000) { r /= 1000000; r_unit = 'M'; - } else { + } else if (r >= 1000) { r /= 1000; r_unit = 'k'; - } + } else + r_unit = ' '; /* calculate how many ns until we wrap */ - wrap = cyc_to_ns((1ULL << clock_bits) - 1, cd->mult, cd->shift); + wrap = cyc_to_ns((1ULL << bits) - 1, cd.mult, cd.shift); do_div(wrap, NSEC_PER_MSEC); w = wrap; /* calculate the ns resolution of this counter */ - res = cyc_to_ns(1ULL, cd->mult, cd->shift); + res = cyc_to_ns(1ULL, cd.mult, cd.shift); pr_info("sched_clock: %u bits at %lu%cHz, resolution %lluns, wraps every %lums\n", - clock_bits, r, r_unit, res, w); + bits, r, r_unit, res, w); /* * Start the timer to keep sched_clock() properly updated and * sets the initial epoch. */ sched_clock_timer.data = msecs_to_jiffies(w - (w / 10)); - update(); + update_sched_clock(); /* * Ensure that sched_clock() starts off at 0ns */ - cd->epoch_ns = 0; + cd.epoch_ns = 0; + + pr_debug("Registered %pF as sched_clock source\n", read); +} + +unsigned long long notrace sched_clock(void) +{ + u32 cyc = read_sched_clock(); + return cyc_to_sched_clock(cyc, sched_clock_mask); } void __init sched_clock_postinit(void) { + /* + * If no sched_clock function has been provided at that point, + * make it the final one one. + */ + if (read_sched_clock == jiffy_sched_clock_read) + setup_sched_clock(jiffy_sched_clock_read, 32, HZ); + sched_clock_poll(sched_clock_timer.data); } diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index a8a6682d6b52..c8e938553d47 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -10,8 +10,11 @@ */ #include <linux/init.h> #include <linux/kernel.h> +#include <linux/clk.h> +#include <linux/cpufreq.h> #include <linux/delay.h> #include <linux/device.h> +#include <linux/err.h> #include <linux/smp.h> #include <linux/jiffies.h> #include <linux/clockchips.h> @@ -25,6 +28,7 @@ /* set up by the platform code */ void __iomem *twd_base; +static struct clk *twd_clk; static unsigned long twd_timer_rate; static struct clock_event_device __percpu **twd_evt; @@ -89,6 +93,52 @@ void twd_timer_stop(struct clock_event_device *clk) disable_percpu_irq(clk->irq); } +#ifdef CONFIG_CPU_FREQ + +/* + * Updates clockevent frequency when the cpu frequency changes. + * Called on the cpu that is changing frequency with interrupts disabled. + */ +static void twd_update_frequency(void *data) +{ + twd_timer_rate = clk_get_rate(twd_clk); + + clockevents_update_freq(*__this_cpu_ptr(twd_evt), twd_timer_rate); +} + +static int twd_cpufreq_transition(struct notifier_block *nb, + unsigned long state, void *data) +{ + struct cpufreq_freqs *freqs = data; + + /* + * The twd clock events must be reprogrammed to account for the new + * frequency. The timer is local to a cpu, so cross-call to the + * changing cpu. + */ + if (state == CPUFREQ_POSTCHANGE || state == CPUFREQ_RESUMECHANGE) + smp_call_function_single(freqs->cpu, twd_update_frequency, + NULL, 1); + + return NOTIFY_OK; +} + +static struct notifier_block twd_cpufreq_nb = { + .notifier_call = twd_cpufreq_transition, +}; + +static int twd_cpufreq_init(void) +{ + if (!IS_ERR(twd_clk)) + return cpufreq_register_notifier(&twd_cpufreq_nb, + CPUFREQ_TRANSITION_NOTIFIER); + + return 0; +} +core_initcall(twd_cpufreq_init); + +#endif + static void __cpuinit twd_calibrate_rate(void) { unsigned long count; @@ -140,6 +190,35 @@ static irqreturn_t twd_handler(int irq, void *dev_id) return IRQ_NONE; } +static struct clk *twd_get_clock(void) +{ + struct clk *clk; + int err; + + clk = clk_get_sys("smp_twd", NULL); + if (IS_ERR(clk)) { + pr_err("smp_twd: clock not found: %d\n", (int)PTR_ERR(clk)); + return clk; + } + + err = clk_prepare(clk); + if (err) { + pr_err("smp_twd: clock failed to prepare: %d\n", err); + clk_put(clk); + return ERR_PTR(err); + } + + err = clk_enable(clk); + if (err) { + pr_err("smp_twd: clock failed to enable: %d\n", err); + clk_unprepare(clk); + clk_put(clk); + return ERR_PTR(err); + } + + return clk; +} + /* * Setup the local clock events for a CPU. */ @@ -165,7 +244,13 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk) } } - twd_calibrate_rate(); + if (!twd_clk) + twd_clk = twd_get_clock(); + + if (!IS_ERR_OR_NULL(twd_clk)) + twd_timer_rate = clk_get_rate(twd_clk); + else + twd_calibrate_rate(); clk->name = "local_timer"; clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT | @@ -173,15 +258,11 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk) clk->rating = 350; clk->set_mode = twd_set_mode; clk->set_next_event = twd_set_next_event; - clk->shift = 20; - clk->mult = div_sc(twd_timer_rate, NSEC_PER_SEC, clk->shift); - clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk); - clk->min_delta_ns = clockevent_delta2ns(0xf, clk); this_cpu_clk = __this_cpu_ptr(twd_evt); *this_cpu_clk = clk; - clockevents_register_device(clk); - + clockevents_config_and_register(clk, twd_timer_rate, + 0xf, 0xffffffff); enable_percpu_irq(clk->irq, 0); } diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c index 5f452f8fde05..df745188f5de 100644 --- a/arch/arm/kernel/swp_emulate.c +++ b/arch/arm/kernel/swp_emulate.c @@ -25,6 +25,7 @@ #include <linux/syscalls.h> #include <linux/perf_event.h> +#include <asm/opcodes.h> #include <asm/traps.h> #include <asm/uaccess.h> @@ -185,6 +186,21 @@ static int swp_handler(struct pt_regs *regs, unsigned int instr) perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, regs->ARM_pc); + res = arm_check_condition(instr, regs->ARM_cpsr); + switch (res) { + case ARM_OPCODE_CONDTEST_PASS: + break; + case ARM_OPCODE_CONDTEST_FAIL: + /* Condition failed - return to next instruction */ + regs->ARM_pc += 4; + return 0; + case ARM_OPCODE_CONDTEST_UNCOND: + /* If unconditional encoding - not a SWP, undef */ + return -EFAULT; + default: + return -EINVAL; + } + if (current->pid != previous_pid) { pr_debug("\"%s\" (%ld) uses deprecated SWP{B} instruction\n", current->comm, (unsigned long)current->pid); diff --git a/arch/arm/kernel/tcm.c b/arch/arm/kernel/tcm.c index 30e302d33e0a..01ec453bb924 100644 --- a/arch/arm/kernel/tcm.c +++ b/arch/arm/kernel/tcm.c @@ -180,9 +180,9 @@ static int __init setup_tcm_bank(u8 type, u8 bank, u8 banks, */ void __init tcm_init(void) { - u32 tcm_status = read_cpuid_tcmstatus(); - u8 dtcm_banks = (tcm_status >> 16) & 0x03; - u8 itcm_banks = (tcm_status & 0x03); + u32 tcm_status; + u8 dtcm_banks; + u8 itcm_banks; size_t dtcm_code_sz = &__edtcm_data - &__sdtcm_data; size_t itcm_code_sz = &__eitcm_text - &__sitcm_text; char *start; @@ -191,6 +191,22 @@ void __init tcm_init(void) int ret; int i; + /* + * Prior to ARMv5 there is no TCM, and trying to read the status + * register will hang the processor. + */ + if (cpu_architecture() < CPU_ARCH_ARMv5) { + if (dtcm_code_sz || itcm_code_sz) + pr_info("CPU TCM: %u bytes of DTCM and %u bytes of " + "ITCM code compiled in, but no TCM present " + "in pre-v5 CPU\n", dtcm_code_sz, itcm_code_sz); + return; + } + + tcm_status = read_cpuid_tcmstatus(); + dtcm_banks = (tcm_status >> 16) & 0x03; + itcm_banks = (tcm_status & 0x03); + /* Values greater than 2 for D/ITCM banks are "reserved" */ if (dtcm_banks > 2) dtcm_banks = 0; diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 724ec0f3560d..b4bdf297e9fa 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -17,6 +17,8 @@ choice config ARCH_EXYNOS4 bool "SAMSUNG EXYNOS4" + select HAVE_SMP + select MIGHT_HAVE_CACHE_L2X0 help Samsung EXYNOS4 SoCs based systems @@ -57,6 +59,11 @@ config EXYNOS4_MCT help Use MCT (Multi Core Timer) as kernel timers +config EXYNOS4_DEV_DMA + bool + help + Compile in amba device definitions for DMA controller + config EXYNOS4_DEV_AHCI bool help @@ -177,6 +184,7 @@ config MACH_SMDKV310 select SAMSUNG_DEV_BACKLIGHT select EXYNOS4_DEV_AHCI select SAMSUNG_DEV_KEYPAD + select EXYNOS4_DEV_DMA select EXYNOS4_DEV_PD select SAMSUNG_DEV_PWM select EXYNOS4_DEV_SYSMMU @@ -197,6 +205,7 @@ config MACH_ARMLEX4210 select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select EXYNOS4_DEV_AHCI + select EXYNOS4_DEV_DMA select EXYNOS4_DEV_SYSMMU select EXYNOS4_SETUP_SDHCI help @@ -222,6 +231,7 @@ config MACH_UNIVERSAL_C210 select S5P_DEV_MFC select S5P_DEV_ONENAND select S5P_DEV_TV + select EXYNOS4_DEV_DMA select EXYNOS4_DEV_PD select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 @@ -255,6 +265,7 @@ config MACH_NURI select S5P_DEV_MFC select S5P_DEV_USB_EHCI select S5P_SETUP_MIPIPHY + select EXYNOS4_DEV_DMA select EXYNOS4_DEV_PD select EXYNOS4_SETUP_FIMC select EXYNOS4_SETUP_FIMD0 @@ -287,6 +298,7 @@ config MACH_ORIGEN select S5P_DEV_USB_EHCI select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_PWM + select EXYNOS4_DEV_DMA select EXYNOS4_DEV_PD select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_SDHCI @@ -327,6 +339,20 @@ config MACH_SMDK4412 Machine support for Samsung SMDK4412 endif +comment "Flattened Device Tree based board for Exynos4 based SoC" + +config MACH_EXYNOS4_DT + bool "Samsung Exynos4 Machine using device tree" + select CPU_EXYNOS4210 + select USE_OF + select ARM_AMBA + select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD + help + Machine support for Samsung Exynos4 machine with device tree enabled. + Select this if a fdt blob is available for the Exynos4 SoC based board. + Note: This is under development and not all peripherals can be supported + with this machine file. + if ARCH_EXYNOS4 comment "Configuration for HSMMC 8-bit bus width" diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index bcb9efc576e9..fd0d9e9be382 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -19,7 +19,7 @@ obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o -obj-$(CONFIG_ARCH_EXYNOS4) += dma.o pmu.o +obj-$(CONFIG_ARCH_EXYNOS4) += pmu.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o @@ -39,6 +39,8 @@ obj-$(CONFIG_MACH_ORIGEN) += mach-origen.o obj-$(CONFIG_MACH_SMDK4212) += mach-smdk4x12.o obj-$(CONFIG_MACH_SMDK4412) += mach-smdk4x12.o +obj-$(CONFIG_MACH_EXYNOS4_DT) += mach-exynos4-dt.o + # device support obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o @@ -46,6 +48,7 @@ obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o obj-$(CONFIG_EXYNOS4_DEV_PD) += dev-pd.o obj-$(CONFIG_EXYNOS4_DEV_SYSMMU) += dev-sysmmu.o obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o +obj-$(CONFIG_EXYNOS4_DEV_DMA) += dma.o obj-$(CONFIG_ARCH_EXYNOS4) += setup-i2c0.o obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o diff --git a/arch/arm/mach-exynos/clock.c b/arch/arm/mach-exynos/clock.c index 83616a039b15..befee4e13391 100644 --- a/arch/arm/mach-exynos/clock.c +++ b/arch/arm/mach-exynos/clock.c @@ -554,16 +554,6 @@ static struct clk init_clocks_off[] = { .enable = exynos4_clk_dac_ctrl, .ctrlbit = (1 << 0), }, { - .name = "dma", - .devname = "dma-pl330.0", - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "dma", - .devname = "dma-pl330.1", - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 1), - }, { .name = "adc", .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 15), @@ -779,6 +769,20 @@ static struct clk init_clocks[] = { } }; +static struct clk clk_pdma0 = { + .name = "dma", + .devname = "dma-pl330.0", + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 0), +}; + +static struct clk clk_pdma1 = { + .name = "dma", + .devname = "dma-pl330.1", + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 1), +}; + struct clk *clkset_group_list[] = { [0] = &clk_ext_xtal_mux, [1] = &clk_xusbxti, @@ -1010,46 +1014,6 @@ static struct clksrc_clk clk_dout_mmc4 = { static struct clksrc_clk clksrcs[] = { { - .clk = { - .name = "uclk1", - .devname = "s5pv210-uart.0", - .enable = exynos4_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 0, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "uclk1", - .devname = "s5pv210-uart.1", - .enable = exynos4_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 4), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 4, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "uclk1", - .devname = "s5pv210-uart.2", - .enable = exynos4_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 8), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 8, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 8, .size = 4 }, - }, { - .clk = { - .name = "uclk1", - .devname = "s5pv210-uart.3", - .enable = exynos4_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 12), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 12, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 12, .size = 4 }, - }, { .clk = { .name = "sclk_pwm", .enable = exynos4_clksrc_mask_peril0_ctrl, @@ -1238,6 +1202,54 @@ static struct clksrc_clk clksrcs[] = { } }; +static struct clksrc_clk clk_sclk_uart0 = { + .clk = { + .name = "uclk1", + .devname = "exynos4210-uart.0", + .enable = exynos4_clksrc_mask_peril0_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 0, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_uart1 = { + .clk = { + .name = "uclk1", + .devname = "exynos4210-uart.1", + .enable = exynos4_clksrc_mask_peril0_ctrl, + .ctrlbit = (1 << 4), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 4, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 4, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_uart2 = { + .clk = { + .name = "uclk1", + .devname = "exynos4210-uart.2", + .enable = exynos4_clksrc_mask_peril0_ctrl, + .ctrlbit = (1 << 8), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 8, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_uart3 = { + .clk = { + .name = "uclk1", + .devname = "exynos4210-uart.3", + .enable = exynos4_clksrc_mask_peril0_ctrl, + .ctrlbit = (1 << 12), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 12, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 12, .size = 4 }, +}; + /* Clock initialization code */ static struct clksrc_clk *sysclks[] = { &clk_mout_apll, @@ -1272,6 +1284,27 @@ static struct clksrc_clk *sysclks[] = { &clk_mout_mfc1, }; +static struct clk *clk_cdev[] = { + &clk_pdma0, + &clk_pdma1, +}; + +static struct clksrc_clk *clksrc_cdev[] = { + &clk_sclk_uart0, + &clk_sclk_uart1, + &clk_sclk_uart2, + &clk_sclk_uart3, +}; + +static struct clk_lookup exynos4_clk_lookup[] = { + CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &clk_sclk_uart0.clk), + CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &clk_sclk_uart1.clk), + CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &clk_sclk_uart2.clk), + CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &clk_sclk_uart3.clk), + CLKDEV_INIT("dma-pl330.0", "apb_pclk", &clk_pdma0), + CLKDEV_INIT("dma-pl330.1", "apb_pclk", &clk_pdma1), +}; + static int xtal_rate; static unsigned long exynos4_fout_apll_get_rate(struct clk *clk) @@ -1479,11 +1512,19 @@ void __init exynos4_register_clocks(void) for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++) s3c_register_clksrc(sclk_tv[ptr], 1); + for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++) + s3c_register_clksrc(clksrc_cdev[ptr], 1); + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); + s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev)); + for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++) + s3c_disable_clocks(clk_cdev[ptr], 1); + s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + clkdev_add_table(exynos4_clk_lookup, ARRAY_SIZE(exynos4_clk_lookup)); register_syscore_ops(&exynos4_clock_syscore_ops); s3c24xx_register_clock(&dummy_apb_pclk); diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 5de4214fa78f..b4beb7e2b5b8 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -17,6 +17,8 @@ #include <linux/gpio.h> #include <linux/sched.h> #include <linux/serial_core.h> +#include <linux/of.h> +#include <linux/of_irq.h> #include <asm/proc-fns.h> #include <asm/exception.h> @@ -174,11 +176,6 @@ static struct map_desc exynos4_iodesc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S5P_VA_SROMC, - .pfn = __phys_to_pfn(EXYNOS4_PA_SROMC), - .length = SZ_4K, - .type = MT_DEVICE, - }, { .virtual = (unsigned long)S3C_VA_USB_HSPHY, .pfn = __phys_to_pfn(EXYNOS4_PA_HSPHY), .length = SZ_4K, @@ -390,6 +387,13 @@ static void __init combiner_init(unsigned int combiner_nr, void __iomem *base, } } +#ifdef CONFIG_OF +static const struct of_device_id exynos4_dt_irq_match[] = { + { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, + {}, +}; +#endif + void __init exynos4_init_irq(void) { int irq; @@ -397,7 +401,12 @@ void __init exynos4_init_irq(void) gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000; - gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset); + if (!of_have_populated_dt()) + gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset); +#ifdef CONFIG_OF + else + of_irq_init(exynos4_dt_irq_match); +#endif for (irq = 0; irq < MAX_COMBINER_NR; irq++) { @@ -464,15 +473,6 @@ int __init exynos_init(void) return sysdev_register(&exynos4_sysdev); } -static struct s3c24xx_uart_clksrc exynos4_serial_clocks[] = { - [0] = { - .name = "uclk1", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, -}; - /* uart registration process */ void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no) @@ -480,16 +480,10 @@ void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no) struct s3c2410_uartcfg *tcfg = cfg; u32 ucnt; - for (ucnt = 0; ucnt < no; ucnt++, tcfg++) { - if (!tcfg->clocks) { - tcfg->has_fracval = 1; - tcfg->clocks = exynos4_serial_clocks; - tcfg->clocks_size = ARRAY_SIZE(exynos4_serial_clocks); - } - tcfg->flags |= NO_NEED_CHECK_CLKSRC; - } + for (ucnt = 0; ucnt < no; ucnt++, tcfg++) + tcfg->has_fracval = 1; - s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no); + s3c24xx_init_uartdevs("exynos4210-uart", s5p_uart_resources, cfg, no); } static DEFINE_SPINLOCK(eint_lock); diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c index 9667c61e64fb..b10fcd270f07 100644 --- a/arch/arm/mach-exynos/dma.c +++ b/arch/arm/mach-exynos/dma.c @@ -24,6 +24,7 @@ #include <linux/dma-mapping.h> #include <linux/amba/bus.h> #include <linux/amba/pl330.h> +#include <linux/of.h> #include <asm/irq.h> #include <plat/devs.h> @@ -35,95 +36,42 @@ static u64 dma_dmamask = DMA_BIT_MASK(32); -struct dma_pl330_peri pdma0_peri[28] = { - { - .peri_id = (u8)DMACH_PCM0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PCM0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_PCM2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PCM2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_MSM_REQ0, - }, { - .peri_id = (u8)DMACH_MSM_REQ2, - }, { - .peri_id = (u8)DMACH_SPI0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S0S_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART4_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART4_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SLIMBUS0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SLIMBUS0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SLIMBUS2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SLIMBUS2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SLIMBUS4_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SLIMBUS4_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_AC97_MICIN, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_AC97_PCMIN, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_AC97_PCMOUT, - .rqtype = MEMTODEV, - }, +u8 pdma0_peri[] = { + DMACH_PCM0_RX, + DMACH_PCM0_TX, + DMACH_PCM2_RX, + DMACH_PCM2_TX, + DMACH_MSM_REQ0, + DMACH_MSM_REQ2, + DMACH_SPI0_RX, + DMACH_SPI0_TX, + DMACH_SPI2_RX, + DMACH_SPI2_TX, + DMACH_I2S0S_TX, + DMACH_I2S0_RX, + DMACH_I2S0_TX, + DMACH_I2S2_RX, + DMACH_I2S2_TX, + DMACH_UART0_RX, + DMACH_UART0_TX, + DMACH_UART2_RX, + DMACH_UART2_TX, + DMACH_UART4_RX, + DMACH_UART4_TX, + DMACH_SLIMBUS0_RX, + DMACH_SLIMBUS0_TX, + DMACH_SLIMBUS2_RX, + DMACH_SLIMBUS2_TX, + DMACH_SLIMBUS4_RX, + DMACH_SLIMBUS4_TX, + DMACH_AC97_MICIN, + DMACH_AC97_PCMIN, + DMACH_AC97_PCMOUT, }; struct dma_pl330_platdata exynos4_pdma0_pdata = { .nr_valid_peri = ARRAY_SIZE(pdma0_peri), - .peri = pdma0_peri, + .peri_id = pdma0_peri, }; struct amba_device exynos4_device_pdma0 = { @@ -142,86 +90,37 @@ struct amba_device exynos4_device_pdma0 = { .periphid = 0x00041330, }; -struct dma_pl330_peri pdma1_peri[25] = { - { - .peri_id = (u8)DMACH_PCM0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PCM0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_PCM1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PCM1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_MSM_REQ1, - }, { - .peri_id = (u8)DMACH_MSM_REQ3, - }, { - .peri_id = (u8)DMACH_SPI1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S0S_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART3_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART3_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SLIMBUS1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SLIMBUS1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SLIMBUS3_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SLIMBUS3_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SLIMBUS5_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SLIMBUS5_TX, - .rqtype = MEMTODEV, - }, +u8 pdma1_peri[] = { + DMACH_PCM0_RX, + DMACH_PCM0_TX, + DMACH_PCM1_RX, + DMACH_PCM1_TX, + DMACH_MSM_REQ1, + DMACH_MSM_REQ3, + DMACH_SPI1_RX, + DMACH_SPI1_TX, + DMACH_I2S0S_TX, + DMACH_I2S0_RX, + DMACH_I2S0_TX, + DMACH_I2S1_RX, + DMACH_I2S1_TX, + DMACH_UART0_RX, + DMACH_UART0_TX, + DMACH_UART1_RX, + DMACH_UART1_TX, + DMACH_UART3_RX, + DMACH_UART3_TX, + DMACH_SLIMBUS1_RX, + DMACH_SLIMBUS1_TX, + DMACH_SLIMBUS3_RX, + DMACH_SLIMBUS3_TX, + DMACH_SLIMBUS5_RX, + DMACH_SLIMBUS5_TX, }; struct dma_pl330_platdata exynos4_pdma1_pdata = { .nr_valid_peri = ARRAY_SIZE(pdma1_peri), - .peri = pdma1_peri, + .peri_id = pdma1_peri, }; struct amba_device exynos4_device_pdma1 = { @@ -242,7 +141,15 @@ struct amba_device exynos4_device_pdma1 = { static int __init exynos4_dma_init(void) { + if (of_have_populated_dt()) + return 0; + + dma_cap_set(DMA_SLAVE, exynos4_pdma0_pdata.cap_mask); + dma_cap_set(DMA_CYCLIC, exynos4_pdma0_pdata.cap_mask); amba_device_register(&exynos4_device_pdma0, &iomem_resource); + + dma_cap_set(DMA_SLAVE, exynos4_pdma1_pdata.cap_mask); + dma_cap_set(DMA_CYCLIC, exynos4_pdma1_pdata.cap_mask); amba_device_register(&exynos4_device_pdma1, &iomem_resource); return 0; diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h index dfd4b7eecb90..713dd5251c64 100644 --- a/arch/arm/mach-exynos/include/mach/irqs.h +++ b/arch/arm/mach-exynos/include/mach/irqs.h @@ -17,13 +17,13 @@ /* PPI: Private Peripheral Interrupt */ -#define IRQ_PPI(x) S5P_IRQ(x+16) +#define IRQ_PPI(x) (x+16) #define IRQ_MCT_LOCALTIMER IRQ_PPI(12) /* SPI: Shared Peripheral Interrupt */ -#define IRQ_SPI(x) S5P_IRQ(x+32) +#define IRQ_SPI(x) (x+32) #define IRQ_EINT0 IRQ_SPI(16) #define IRQ_EINT1 IRQ_SPI(17) @@ -163,7 +163,9 @@ #define IRQ_GPIO2_NR_GROUPS 9 #define IRQ_GPIO_END (S5P_GPIOINT_BASE + S5P_GPIOINT_COUNT) +#define IRQ_TIMER_BASE (IRQ_GPIO_END + 64) + /* Set the default NR_IRQS */ -#define NR_IRQS (IRQ_GPIO_END + 64) +#define NR_IRQS (IRQ_TIMER_BASE + IRQ_TIMER_COUNT) #endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c new file mode 100644 index 000000000000..85fa02767d67 --- /dev/null +++ b/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -0,0 +1,85 @@ +/* + * Samsung's Exynos4210 flattened device tree enabled machine + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2010-2011 Linaro Ltd. + * www.linaro.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/of_platform.h> +#include <linux/serial_core.h> + +#include <asm/mach/arch.h> +#include <mach/map.h> + +#include <plat/cpu.h> +#include <plat/regs-serial.h> +#include <plat/exynos4.h> + +/* + * The following lookup table is used to override device names when devices + * are registered from device tree. This is temporarily added to enable + * device tree support addition for the Exynos4 architecture. + * + * For drivers that require platform data to be provided from the machine + * file, a platform data pointer can also be supplied along with the + * devices names. Usually, the platform data elements that cannot be parsed + * from the device tree by the drivers (example: function pointers) are + * supplied. But it should be noted that this is a temporary mechanism and + * at some point, the drivers should be capable of parsing all the platform + * data from the device tree. + */ +static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = { + OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART0, + "exynos4210-uart.0", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART1, + "exynos4210-uart.1", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART2, + "exynos4210-uart.2", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART3, + "exynos4210-uart.3", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(0), + "exynos4-sdhci.0", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(1), + "exynos4-sdhci.1", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(2), + "exynos4-sdhci.2", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(3), + "exynos4-sdhci.3", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(0), + "s3c2440-i2c.0", NULL), + OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", NULL), + OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL), + {}, +}; + +static void __init exynos4210_dt_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); +} + +static void __init exynos4210_dt_machine_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, + exynos4210_auxdata_lookup, NULL); +} + +static char const *exynos4210_dt_compat[] __initdata = { + "samsung,exynos4210", + NULL +}; + +DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)") + /* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */ + .init_irq = exynos4_init_irq, + .map_io = exynos4210_dt_map_io, + .init_machine = exynos4210_dt_machine_init, + .timer = &exynos4_timer, + .dt_compat = exynos4210_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index c44aa974e79c..35a218cb5c7e 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -132,7 +132,7 @@ config MACH_MX25_3DS select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX -config MACH_EUKREA_CPUIMX25 +config MACH_EUKREA_CPUIMX25SD bool "Support Eukrea CPUIMX25 Platform" select SOC_IMX25 select IMX_HAVE_PLATFORM_FLEXCAN @@ -148,7 +148,7 @@ config MACH_EUKREA_CPUIMX25 choice prompt "Baseboard" - depends on MACH_EUKREA_CPUIMX25 + depends on MACH_EUKREA_CPUIMX25SD default MACH_EUKREA_MBIMXSD25_BASEBOARD config MACH_EUKREA_MBIMXSD25_BASEBOARD @@ -542,7 +542,7 @@ config MACH_MX35_3DS Include support for MX35PDK platform. This includes specific configurations for the board and its peripherals. -config MACH_EUKREA_CPUIMX35 +config MACH_EUKREA_CPUIMX35SD bool "Support Eukrea CPUIMX35 Platform" select SOC_IMX35 select IMX_HAVE_PLATFORM_FLEXCAN @@ -560,7 +560,7 @@ config MACH_EUKREA_CPUIMX35 choice prompt "Baseboard" - depends on MACH_EUKREA_CPUIMX35 + depends on MACH_EUKREA_CPUIMX35SD default MACH_EUKREA_MBIMXSD35_BASEBOARD config MACH_EUKREA_MBIMXSD35_BASEBOARD @@ -596,12 +596,12 @@ comment "i.MX6 family:" config SOC_IMX6Q bool "i.MX6 Quad support" select ARM_GIC - select CACHE_L2X0 select CPU_V7 select HAVE_ARM_SCU select HAVE_IMX_GPC select HAVE_IMX_MMDC select HAVE_IMX_SRC + select HAVE_SMP select USE_OF help diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index aba73214c2a8..d97f409ce98b 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -24,7 +24,7 @@ obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o # i.MX25 based machines obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o -obj-$(CONFIG_MACH_EUKREA_CPUIMX25) += mach-eukrea_cpuimx25.o +obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o # i.MX27 based machines @@ -57,7 +57,7 @@ obj-$(CONFIG_MACH_BUG) += mach-bug.o # i.MX35 based machines obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o -obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o +obj-$(CONFIG_MACH_EUKREA_CPUIMX35SD) += mach-cpuimx35.o obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o diff --git a/arch/arm/mach-imx/clock-imx35.c b/arch/arm/mach-imx/clock-imx35.c index 8116f119517d..ac8238caecb9 100644 --- a/arch/arm/mach-imx/clock-imx35.c +++ b/arch/arm/mach-imx/clock-imx35.c @@ -507,7 +507,7 @@ static struct clk_lookup lookups[] = { int __init mx35_clocks_init() { - unsigned int cgr2 = 3 << 26, cgr3 = 0; + unsigned int cgr2 = 3 << 26; #if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC) cgr2 |= 3 << 16; @@ -521,6 +521,12 @@ int __init mx35_clocks_init() __raw_writel((3 << 18), CCM_BASE + CCM_CGR0); __raw_writel((3 << 2) | (3 << 4) | (3 << 6) | (3 << 8) | (3 << 16), CCM_BASE + CCM_CGR1); + __raw_writel(cgr2, CCM_BASE + CCM_CGR2); + __raw_writel(0, CCM_BASE + CCM_CGR3); + + clk_enable(&iim_clk); + imx_print_silicon_rev("i.MX35", mx35_revision()); + clk_disable(&iim_clk); /* * Check if we came up in internal boot mode. If yes, we need some @@ -529,17 +535,11 @@ int __init mx35_clocks_init() */ if (!(__raw_readl(CCM_BASE + CCM_RCSR) & (3 << 10))) { /* Additionally turn on UART1, SCC, and IIM clocks */ - cgr2 |= 3 << 16 | 3 << 4; - cgr3 |= 3 << 2; + clk_enable(&iim_clk); + clk_enable(&uart1_clk); + clk_enable(&scc_clk); } - __raw_writel(cgr2, CCM_BASE + CCM_CGR2); - __raw_writel(cgr3, CCM_BASE + CCM_CGR3); - - clk_enable(&iim_clk); - imx_print_silicon_rev("i.MX35", mx35_revision()); - clk_disable(&iim_clk); - #ifdef CONFIG_MXC_USE_EPIT epit_timer_init(&epit1_clk, MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1); diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index 012e120509e0..8ecc872b2547 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -53,12 +53,18 @@ static const struct imxi2c_platform_data .bitrate = 100000, }; +#define TSC2007_IRQGPIO IMX_GPIO_NR(3, 2) +static int tsc2007_get_pendown_state(void) +{ + return !gpio_get_value(TSC2007_IRQGPIO); +} + static struct tsc2007_platform_data tsc2007_info = { .model = 2007, .x_plate_ohms = 180, + .get_pendown_state = tsc2007_get_pendown_state, }; -#define TSC2007_IRQGPIO IMX_GPIO_NR(3, 2) static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = { { I2C_BOARD_INFO("pcf8563", 0x51), diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index dfd18f3b50e8..350e26636a06 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -6,6 +6,8 @@ config ARCH_INTEGRATOR_AP bool "Support Integrator/AP and Integrator/PP2 platforms" select CLKSRC_MMIO select MIGHT_HAVE_PCI + select SERIAL_AMBA_PL010 + select SERIAL_AMBA_PL010_CONSOLE help Include support for the ARM(R) Integrator/AP and Integrator/PP2 platforms. @@ -15,6 +17,8 @@ config ARCH_INTEGRATOR_CP select ARCH_CINTEGRATOR select ARM_TIMER_SP804 select PLAT_VERSATILE_CLCD + select SERIAL_AMBA_PL011 + select SERIAL_AMBA_PL011_CONSOLE help Include support for the ARM(R) Integrator CP platform. diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index 0a3e0974398a..019f0ab08f66 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -29,6 +29,7 @@ #include <mach/cm.h> #include <asm/system.h> #include <asm/leds.h> +#include <asm/mach-types.h> #include <asm/mach/time.h> #include <asm/pgtable.h> @@ -44,7 +45,6 @@ static struct amba_device rtc_device = { .flags = IORESOURCE_MEM, }, .irq = { IRQ_RTCINT, NO_IRQ }, - .periphid = 0x00041030, }; static struct amba_device uart0_device = { @@ -58,7 +58,6 @@ static struct amba_device uart0_device = { .flags = IORESOURCE_MEM, }, .irq = { IRQ_UARTINT0, NO_IRQ }, - .periphid = 0x0041010, }; static struct amba_device uart1_device = { @@ -72,7 +71,6 @@ static struct amba_device uart1_device = { .flags = IORESOURCE_MEM, }, .irq = { IRQ_UARTINT1, NO_IRQ }, - .periphid = 0x0041010, }; static struct amba_device kmi0_device = { @@ -85,7 +83,6 @@ static struct amba_device kmi0_device = { .flags = IORESOURCE_MEM, }, .irq = { IRQ_KMIINT0, NO_IRQ }, - .periphid = 0x00041050, }; static struct amba_device kmi1_device = { @@ -98,7 +95,6 @@ static struct amba_device kmi1_device = { .flags = IORESOURCE_MEM, }, .irq = { IRQ_KMIINT1, NO_IRQ }, - .periphid = 0x00041050, }; static struct amba_device *amba_devs[] __initdata = { @@ -157,6 +153,19 @@ static int __init integrator_init(void) { int i; + /* + * The Integrator/AP lacks necessary AMBA PrimeCell IDs, so we need to + * hard-code them. The Integator/CP and forward have proper cell IDs. + * Else we leave them undefined to the bus driver can autoprobe them. + */ + if (machine_is_integrator()) { + rtc_device.periphid = 0x00041030; + uart0_device.periphid = 0x00041010; + uart1_device.periphid = 0x00041010; + kmi0_device.periphid = 0x00041050; + kmi1_device.periphid = 0x00041050; + } + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { struct amba_device *d = amba_devs[i]; amba_device_register(d, &iomem_resource); diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 04aa12103bce..3841ab4146ba 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -17,7 +17,6 @@ #include <linux/mm.h> #include <linux/init.h> #include <linux/serial.h> -#include <linux/sched.h> #include <linux/tty.h> #include <linux/platform_device.h> #include <linux/serial_core.h> @@ -403,18 +402,9 @@ void __init ixp4xx_sys_init(void) /* * sched_clock() */ -static DEFINE_CLOCK_DATA(cd); - -unsigned long long notrace sched_clock(void) +static u32 notrace ixp4xx_read_sched_clock(void) { - u32 cyc = *IXP4XX_OSTS; - return cyc_to_sched_clock(&cd, cyc, (u32)~0); -} - -static void notrace ixp4xx_update_sched_clock(void) -{ - u32 cyc = *IXP4XX_OSTS; - update_sched_clock(&cd, cyc, (u32)~0); + return *IXP4XX_OSTS; } /* @@ -430,7 +420,7 @@ unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ; EXPORT_SYMBOL(ixp4xx_timer_freq); static void __init ixp4xx_clocksource_init(void) { - init_sched_clock(&cd, ixp4xx_update_sched_clock, 32, ixp4xx_timer_freq); + setup_sched_clock(ixp4xx_read_sched_clock, 32, ixp4xx_timer_freq); clocksource_mmio_init(NULL, "OSTS", ixp4xx_timer_freq, 200, 32, ixp4xx_clocksource_read); diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c index 85bff6b7699e..4ea70e5f7137 100644 --- a/arch/arm/mach-kirkwood/sheevaplug-setup.c +++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c @@ -107,7 +107,7 @@ static void __init sheevaplug_init(void) kirkwood_init(); /* setup gpio pin select */ - if (machine_is_sheeva_esata()) + if (machine_is_esata_sheevaplug()) kirkwood_mpp_conf(sheeva_esata_mpp_config); else kirkwood_mpp_conf(sheevaplug_mpp_config); @@ -123,11 +123,11 @@ static void __init sheevaplug_init(void) kirkwood_ge00_init(&sheevaplug_ge00_data); /* honor lower power consumption for plugs with out eSATA */ - if (machine_is_sheeva_esata()) + if (machine_is_esata_sheevaplug()) kirkwood_sata_init(&sheeva_esata_sata_data); /* enable sd wp and sd cd on plugs with esata */ - if (machine_is_sheeva_esata()) + if (machine_is_esata_sheevaplug()) kirkwood_sdio_init(&sheeva_esata_mvsdio_data); else kirkwood_sdio_init(&sheevaplug_mvsdio_data); diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index 4e91ee6e27c8..71fc4ee4602c 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -25,7 +25,6 @@ #include <linux/io.h> #include <linux/irq.h> -#include <linux/sched.h> #include <asm/sched_clock.h> #include <mach/addr-map.h> @@ -42,8 +41,6 @@ #define MAX_DELTA (0xfffffffe) #define MIN_DELTA (16) -static DEFINE_CLOCK_DATA(cd); - /* * FIXME: the timer needs some delay to stablize the counter capture */ @@ -59,16 +56,9 @@ static inline uint32_t timer_read(void) return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(1)); } -unsigned long long notrace sched_clock(void) +static u32 notrace mmp_read_sched_clock(void) { - u32 cyc = timer_read(); - return cyc_to_sched_clock(&cd, cyc, (u32)~0); -} - -static void notrace mmp_update_sched_clock(void) -{ - u32 cyc = timer_read(); - update_sched_clock(&cd, cyc, (u32)~0); + return timer_read(); } static irqreturn_t timer_interrupt(int irq, void *dev_id) @@ -201,7 +191,7 @@ void __init timer_init(int irq) { timer_config(); - init_sched_clock(&cd, mmp_update_sched_clock, 32, CLOCK_TICK_RATE); + setup_sched_clock(mmp_read_sched_clock, 32, CLOCK_TICK_RATE); ckevt.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt.shift); ckevt.max_delta_ns = clockevent_delta2ns(MAX_DELTA, &ckevt); diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index 000ddf0a4f33..1cd40ad301d3 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -67,6 +67,7 @@ config MSM_SOC_REV_A bool config ARCH_MSM_SCORPIONMP bool + select HAVE_SMP config ARCH_MSM_ARM11 bool diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index 485a21d31004..b8faffa44f9e 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -37,7 +37,6 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/interrupt.h> -#include <linux/sched.h> #include <linux/spinlock.h> #include <linux/clk.h> #include <linux/err.h> @@ -190,30 +189,9 @@ static __init void omap_init_mpu_timer(unsigned long rate) * --------------------------------------------------------------------------- */ -static DEFINE_CLOCK_DATA(cd); - -static inline unsigned long long notrace _omap_mpu_sched_clock(void) -{ - u32 cyc = ~omap_mpu_timer_read(1); - return cyc_to_sched_clock(&cd, cyc, (u32)~0); -} - -#ifndef CONFIG_OMAP_32K_TIMER -unsigned long long notrace sched_clock(void) -{ - return _omap_mpu_sched_clock(); -} -#else -static unsigned long long notrace omap_mpu_sched_clock(void) -{ - return _omap_mpu_sched_clock(); -} -#endif - -static void notrace mpu_update_sched_clock(void) +static u32 notrace omap_mpu_read_sched_clock(void) { - u32 cyc = ~omap_mpu_timer_read(1); - update_sched_clock(&cd, cyc, (u32)~0); + return ~omap_mpu_timer_read(1); } static void __init omap_init_clocksource(unsigned long rate) @@ -223,7 +201,7 @@ static void __init omap_init_clocksource(unsigned long rate) "%s: can't register clocksource!\n"; omap_mpu_timer_start(1, ~0, 1); - init_sched_clock(&cd, mpu_update_sched_clock, 32, rate); + setup_sched_clock(omap_mpu_read_sched_clock, 32, rate); if (clocksource_mmio_init(&timer->read_tim, "mpu_timer2", rate, 300, 32, clocksource_mmio_readl_down)) @@ -254,30 +232,6 @@ static inline void omap_mpu_timer_init(void) } #endif /* CONFIG_OMAP_MPU_TIMER */ -#if defined(CONFIG_OMAP_MPU_TIMER) && defined(CONFIG_OMAP_32K_TIMER) -static unsigned long long (*preferred_sched_clock)(void); - -unsigned long long notrace sched_clock(void) -{ - if (!preferred_sched_clock) - return 0; - - return preferred_sched_clock(); -} - -static inline void preferred_sched_clock_init(bool use_32k_sched_clock) -{ - if (use_32k_sched_clock) - preferred_sched_clock = omap_32k_sched_clock; - else - preferred_sched_clock = omap_mpu_sched_clock; -} -#else -static inline void preferred_sched_clock_init(bool use_32k_sched_clcok) -{ -} -#endif - static inline int omap_32k_timer_usable(void) { int res = false; @@ -299,12 +253,8 @@ static inline int omap_32k_timer_usable(void) */ static void __init omap1_timer_init(void) { - if (omap_32k_timer_usable()) { - preferred_sched_clock_init(1); - } else { + if (!omap_32k_timer_usable()) omap_mpu_timer_init(); - preferred_sched_clock_init(0); - } } struct sys_timer omap1_timer = { diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index b6625130831d..4f01533083cc 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -43,8 +43,10 @@ config ARCH_OMAP4 bool "TI OMAP4" default y depends on ARCH_OMAP2PLUS + select CACHE_L2X0 select CPU_V7 select ARM_GIC + select HAVE_SMP select LOCAL_TIMERS if SMP select PL310_ERRATA_588369 select PL310_ERRATA_727915 diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 7f8915ad5099..eef43e2e163e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -3247,18 +3247,14 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { /* 3430ES1-only hwmods */ static __initdata struct omap_hwmod *omap3430es1_hwmods[] = { - &omap3xxx_iva_hwmod, &omap3430es1_dss_core_hwmod, - &omap3xxx_mailbox_hwmod, NULL }; /* 3430ES2+-only hwmods */ static __initdata struct omap_hwmod *omap3430es2plus_hwmods[] = { - &omap3xxx_iva_hwmod, &omap3xxx_dss_core_hwmod, &omap3xxx_usbhsotg_hwmod, - &omap3xxx_mailbox_hwmod, NULL }; diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 9edcd520510f..6eeff0e0ae01 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -254,7 +254,6 @@ static struct omap_dm_timer clksrc; /* * clocksource */ -static DEFINE_CLOCK_DATA(cd); static cycle_t clocksource_read_cycles(struct clocksource *cs) { return (cycle_t)__omap_dm_timer_read_counter(&clksrc, 1); @@ -268,23 +267,12 @@ static struct clocksource clocksource_gpt = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -static void notrace dmtimer_update_sched_clock(void) +static u32 notrace dmtimer_read_sched_clock(void) { - u32 cyc; - - cyc = __omap_dm_timer_read_counter(&clksrc, 1); - - update_sched_clock(&cd, cyc, (u32)~0); -} - -unsigned long long notrace sched_clock(void) -{ - u32 cyc = 0; - if (clksrc.reserved) - cyc = __omap_dm_timer_read_counter(&clksrc, 1); + return __omap_dm_timer_read_counter(clksrc.io_base, 1); - return cyc_to_sched_clock(&cd, cyc, (u32)~0); + return 0; } /* Setup free-running counter for clocksource */ @@ -301,7 +289,7 @@ static void __init omap2_gp_clocksource_init(int gptimer_id, __omap_dm_timer_load_start(&clksrc, OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, 1); - init_sched_clock(&cd, dmtimer_update_sched_clock, 32, clksrc.rate); + setup_sched_clock(dmtimer_read_sched_clock, 32, clksrc.rate); if (clocksource_register_hz(&clocksource_gpt, clksrc.rate)) pr_err("Could not register clocksource %s\n", diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index 62c156b20ccd..5d6408745582 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -178,7 +178,7 @@ static struct hw_pci qnap_ts209_pci __initdata = { static int __init qnap_ts209_pci_init(void) { - if (machine_is_ts_x09()) + if (machine_is_ts209()) pci_common_init(&qnap_ts209_pci); return 0; diff --git a/arch/arm/mach-picoxcell/time.c b/arch/arm/mach-picoxcell/time.c index 90a554ff4499..6c89cf8ab22e 100644 --- a/arch/arm/mach-picoxcell/time.c +++ b/arch/arm/mach-picoxcell/time.c @@ -11,7 +11,6 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> -#include <linux/sched.h> #include <asm/mach/time.h> #include <asm/sched_clock.h> @@ -66,21 +65,11 @@ static void picoxcell_add_clocksource(struct device_node *source_timer) dw_apb_clocksource_register(cs); } -static DEFINE_CLOCK_DATA(cd); static void __iomem *sched_io_base; -unsigned long long notrace sched_clock(void) +unsigned u32 notrace picoxcell_read_sched_clock(void) { - cycle_t cyc = sched_io_base ? __raw_readl(sched_io_base) : 0; - - return cyc_to_sched_clock(&cd, cyc, (u32)~0); -} - -static void notrace picoxcell_update_sched_clock(void) -{ - cycle_t cyc = sched_io_base ? __raw_readl(sched_io_base) : 0; - - update_sched_clock(&cd, cyc, (u32)~0); + return __raw_readl(sched_io_base); } static const struct of_device_id picoxcell_rtc_ids[] __initconst = { @@ -100,7 +89,7 @@ static void picoxcell_init_sched_clock(void) timer_get_base_and_rate(sched_timer, &sched_io_base, &rate); of_node_put(sched_timer); - init_sched_clock(&cd, picoxcell_update_sched_clock, 32, rate); + setup_sched_clock(picoxcell_read_sched_clock, 32, rate); } static const struct of_device_id picoxcell_timer_ids[] __initconst = { diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index de684701449c..b503049d6d26 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -16,7 +16,6 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/clockchips.h> -#include <linux/sched.h> #include <asm/div64.h> #include <asm/mach/irq.h> @@ -32,18 +31,10 @@ * long as there is always less than 582 seconds between successive * calls to sched_clock() which should always be the case in practice. */ -static DEFINE_CLOCK_DATA(cd); -unsigned long long notrace sched_clock(void) +static u32 notrace pxa_read_sched_clock(void) { - u32 cyc = OSCR; - return cyc_to_sched_clock(&cd, cyc, (u32)~0); -} - -static void notrace pxa_update_sched_clock(void) -{ - u32 cyc = OSCR; - update_sched_clock(&cd, cyc, (u32)~0); + return OSCR; } @@ -119,7 +110,7 @@ static void __init pxa_timer_init(void) OIER = 0; OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3; - init_sched_clock(&cd, pxa_update_sched_clock, 32, clock_tick_rate); + setup_sched_clock(pxa_read_sched_clock, 32, clock_tick_rate); clockevents_calc_mult_shift(&ckevt_pxa_osmr0, clock_tick_rate, 4); ckevt_pxa_osmr0.max_delta_ns = diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index dba6d0c1fc17..c593be428b8f 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -12,6 +12,8 @@ config REALVIEW_EB_A9MP bool "Support Multicore Cortex-A9 Tile" depends on MACH_REALVIEW_EB select CPU_V7 + select HAVE_SMP + select MIGHT_HAVE_CACHE_L2X0 help Enable support for the Cortex-A9MPCore tile fitted to the Realview(R) Emulation Baseboard platform. @@ -21,6 +23,8 @@ config REALVIEW_EB_ARM11MP depends on MACH_REALVIEW_EB select CPU_V6K select ARCH_HAS_BARRIERS if SMP + select HAVE_SMP + select MIGHT_HAVE_CACHE_L2X0 help Enable support for the ARM11MPCore tile fitted to the Realview(R) Emulation Baseboard platform. @@ -39,6 +43,8 @@ config MACH_REALVIEW_PB11MP select CPU_V6K select ARM_GIC select HAVE_PATA_PLATFORM + select HAVE_SMP + select MIGHT_HAVE_CACHE_L2X0 select ARCH_HAS_BARRIERS if SMP help Include support for the ARM(R) RealView(R) Platform Baseboard for @@ -51,6 +57,7 @@ config MACH_REALVIEW_PB1176 select CPU_V6 select ARM_GIC select HAVE_TCM + select MIGHT_HAVE_CACHE_L2X0 help Include support for the ARM(R) RealView(R) Platform Baseboard for ARM1176JZF-S. @@ -78,6 +85,8 @@ config MACH_REALVIEW_PBX bool "Support RealView(R) Platform Baseboard Explore" select ARM_GIC select HAVE_PATA_PLATFORM + select HAVE_SMP + select MIGHT_HAVE_CACHE_L2X0 select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET select ZONE_DMA if SPARSEMEM help diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index c6133c6ec18f..feeaf73933dc 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -165,22 +165,6 @@ static struct map_desc bast_iodesc[] __initdata = { #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE -static struct s3c24xx_uart_clksrc bast_serial_clocks[] = { - [0] = { - .name = "uclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, - [1] = { - .name = "pclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - } -}; - - static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = { [0] = { .hwport = 0, @@ -188,8 +172,6 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = bast_serial_clocks, - .clocks_size = ARRAY_SIZE(bast_serial_clocks), }, [1] = { .hwport = 1, @@ -197,8 +179,6 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = bast_serial_clocks, - .clocks_size = ARRAY_SIZE(bast_serial_clocks), }, /* port 2 is not actually used */ [2] = { @@ -207,8 +187,6 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = bast_serial_clocks, - .clocks_size = ARRAY_SIZE(bast_serial_clocks), } }; diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index cc7032b5c65b..dbe668a803ef 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -110,23 +110,6 @@ static struct map_desc vr1000_iodesc[] __initdata = { #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE -/* uart clock source(s) */ - -static struct s3c24xx_uart_clksrc vr1000_serial_clocks[] = { - [0] = { - .name = "uclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, - [1] = { - .name = "pclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0. - } -}; - static struct s3c2410_uartcfg vr1000_uartcfgs[] __initdata = { [0] = { .hwport = 0, @@ -134,8 +117,6 @@ static struct s3c2410_uartcfg vr1000_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = vr1000_serial_clocks, - .clocks_size = ARRAY_SIZE(vr1000_serial_clocks), }, [1] = { .hwport = 1, @@ -143,8 +124,6 @@ static struct s3c2410_uartcfg vr1000_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = vr1000_serial_clocks, - .clocks_size = ARRAY_SIZE(vr1000_serial_clocks), }, /* port 2 is not actually used */ [2] = { @@ -153,9 +132,6 @@ static struct s3c2410_uartcfg vr1000_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = vr1000_serial_clocks, - .clocks_size = ARRAY_SIZE(vr1000_serial_clocks), - } }; diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c index 489c826e92a7..dad596332c5e 100644 --- a/arch/arm/mach-s3c2410/s3c2410.c +++ b/arch/arm/mach-s3c2410/s3c2410.c @@ -124,12 +124,18 @@ static struct clk s3c2410_armclk = { .id = -1, }; +static struct clk_lookup s3c2410_clk_lookup[] = { + CLKDEV_INIT(NULL, "clk_uart_baud0", &clk_p), + CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), +}; + void __init s3c2410_init_clocks(int xtal) { s3c24xx_register_baseclocks(xtal); s3c2410_setup_clocks(); s3c2410_baseclk_add(); s3c24xx_register_clock(&s3c2410_armclk); + clkdev_add_table(s3c2410_clk_lookup, ARRAY_SIZE(s3c2410_clk_lookup)); } struct sysdev_class s3c2410_sysclass = { diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c index 140711db6c89..cd50291931f7 100644 --- a/arch/arm/mach-s3c2412/clock.c +++ b/arch/arm/mach-s3c2412/clock.c @@ -659,6 +659,12 @@ static struct clk *clks[] __initdata = { &clk_armclk, }; +static struct clk_lookup s3c2412_clk_lookup[] = { + CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), + CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), + CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_usysclk), +}; + int __init s3c2412_baseclk_add(void) { unsigned long clkcon = __raw_readl(S3C2410_CLKCON); @@ -751,6 +757,7 @@ int __init s3c2412_baseclk_add(void) s3c2412_clkcon_enable(clkp, 0); } + clkdev_add_table(s3c2412_clk_lookup, ARRAY_SIZE(s3c2412_clk_lookup)); s3c_pwmclk_init(); return 0; } diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c index f9e6bdaf41d2..c9879af42b08 100644 --- a/arch/arm/mach-s3c2440/clock.c +++ b/arch/arm/mach-s3c2440/clock.c @@ -34,6 +34,7 @@ #include <linux/mutex.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/serial_core.h> #include <mach/hardware.h> #include <linux/atomic.h> @@ -43,6 +44,7 @@ #include <plat/clock.h> #include <plat/cpu.h> +#include <plat/regs-serial.h> /* S3C2440 extended clock support */ @@ -108,6 +110,46 @@ static struct clk s3c2440_clk_ac97 = { .ctrlbit = S3C2440_CLKCON_CAMERA, }; +static unsigned long s3c2440_fclk_n_getrate(struct clk *clk) +{ + unsigned long ucon0, ucon1, ucon2, divisor; + + /* the fun of calculating the uart divisors on the s3c2440 */ + ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON); + ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON); + ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON); + + ucon0 &= S3C2440_UCON0_DIVMASK; + ucon1 &= S3C2440_UCON1_DIVMASK; + ucon2 &= S3C2440_UCON2_DIVMASK; + + if (ucon0 != 0) + divisor = (ucon0 >> S3C2440_UCON_DIVSHIFT) + 6; + else if (ucon1 != 0) + divisor = (ucon1 >> S3C2440_UCON_DIVSHIFT) + 21; + else if (ucon2 != 0) + divisor = (ucon2 >> S3C2440_UCON_DIVSHIFT) + 36; + else + /* manual calims 44, seems to be 9 */ + divisor = 9; + + return clk_get_rate(clk->parent) / divisor; +} + +static struct clk s3c2440_clk_fclk_n = { + .name = "fclk_n", + .parent = &clk_f, + .ops = &(struct clk_ops) { + .get_rate = s3c2440_fclk_n_getrate, + }, +}; + +static struct clk_lookup s3c2440_clk_lookup[] = { + CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), + CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), + CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n), +}; + static int s3c2440_clk_add(struct sys_device *sysdev) { struct clk *clock_upll; @@ -126,10 +168,12 @@ static int s3c2440_clk_add(struct sys_device *sysdev) s3c2440_clk_cam.parent = clock_h; s3c2440_clk_ac97.parent = clock_p; s3c2440_clk_cam_upll.parent = clock_upll; + s3c24xx_register_clock(&s3c2440_clk_fclk_n); s3c24xx_register_clock(&s3c2440_clk_ac97); s3c24xx_register_clock(&s3c2440_clk_cam); s3c24xx_register_clock(&s3c2440_clk_cam_upll); + clkdev_add_table(s3c2440_clk_lookup, ARRAY_SIZE(s3c2440_clk_lookup)); clk_disable(&s3c2440_clk_ac97); clk_disable(&s3c2440_clk_cam); diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c index 121ff8d2c887..24569550de1a 100644 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ b/arch/arm/mach-s3c2440/mach-anubis.c @@ -98,22 +98,6 @@ static struct map_desc anubis_iodesc[] __initdata = { #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE -static struct s3c24xx_uart_clksrc anubis_serial_clocks[] = { - [0] = { - .name = "uclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, - [1] = { - .name = "pclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - } -}; - - static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = { [0] = { .hwport = 0, @@ -121,8 +105,7 @@ static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = anubis_serial_clocks, - .clocks_size = ARRAY_SIZE(anubis_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, }, [1] = { .hwport = 2, @@ -130,8 +113,7 @@ static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = anubis_serial_clocks, - .clocks_size = ARRAY_SIZE(anubis_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, }, }; diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c index b7e334f07da4..d6a9763110cd 100644 --- a/arch/arm/mach-s3c2440/mach-at2440evb.c +++ b/arch/arm/mach-s3c2440/mach-at2440evb.c @@ -59,22 +59,6 @@ static struct map_desc at2440evb_iodesc[] __initdata = { #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE) #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) -static struct s3c24xx_uart_clksrc at2440evb_serial_clocks[] = { - [0] = { - .name = "uclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, - [1] = { - .name = "pclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - } -}; - - static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = { [0] = { .hwport = 0, @@ -82,8 +66,7 @@ static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = at2440evb_serial_clocks, - .clocks_size = ARRAY_SIZE(at2440evb_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, }, [1] = { .hwport = 1, @@ -91,8 +74,7 @@ static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = at2440evb_serial_clocks, - .clocks_size = ARRAY_SIZE(at2440evb_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, }, }; diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index e795715fba30..4c480ef734f6 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -102,21 +102,6 @@ static struct map_desc osiris_iodesc[] __initdata = { #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE -static struct s3c24xx_uart_clksrc osiris_serial_clocks[] = { - [0] = { - .name = "uclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, - [1] = { - .name = "pclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - } -}; - static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = { [0] = { .hwport = 0, @@ -124,8 +109,7 @@ static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = osiris_serial_clocks, - .clocks_size = ARRAY_SIZE(osiris_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, }, [1] = { .hwport = 1, @@ -133,8 +117,7 @@ static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = osiris_serial_clocks, - .clocks_size = ARRAY_SIZE(osiris_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, }, [2] = { .hwport = 2, @@ -142,8 +125,7 @@ static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = osiris_serial_clocks, - .clocks_size = ARRAY_SIZE(osiris_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, } }; diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c index 1c50d3e09177..f892e8befca8 100644 --- a/arch/arm/mach-s3c2440/mach-rx1950.c +++ b/arch/arm/mach-s3c2440/mach-rx1950.c @@ -70,15 +70,6 @@ static struct map_desc rx1950_iodesc[] __initdata = { }; -static struct s3c24xx_uart_clksrc rx1950_serial_clocks[] = { - [0] = { - .name = "fclk", - .divisor = 0x0a, - .min_baud = 0, - .max_baud = 0, - }, -}; - static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = { [0] = { .hwport = 0, @@ -86,8 +77,7 @@ static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = { .ucon = 0x3c5, .ulcon = 0x03, .ufcon = 0x51, - .clocks = rx1950_serial_clocks, - .clocks_size = ARRAY_SIZE(rx1950_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL3, }, [1] = { .hwport = 1, @@ -95,8 +85,7 @@ static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = { .ucon = 0x3c5, .ulcon = 0x03, .ufcon = 0x51, - .clocks = rx1950_serial_clocks, - .clocks_size = ARRAY_SIZE(rx1950_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL3, }, /* IR port */ [2] = { @@ -105,8 +94,7 @@ static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = { .ucon = 0x3c5, .ulcon = 0x43, .ufcon = 0xf1, - .clocks = rx1950_serial_clocks, - .clocks_size = ARRAY_SIZE(rx1950_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL3, }, }; diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c index 4d20a016b85d..88d648a874d4 100644 --- a/arch/arm/mach-s3c2440/mach-rx3715.c +++ b/arch/arm/mach-s3c2440/mach-rx3715.c @@ -69,16 +69,6 @@ static struct map_desc rx3715_iodesc[] __initdata = { }, }; - -static struct s3c24xx_uart_clksrc rx3715_serial_clocks[] = { - [0] = { - .name = "fclk", - .divisor = 0, - .min_baud = 0, - .max_baud = 0, - } -}; - static struct s3c2410_uartcfg rx3715_uartcfgs[] = { [0] = { .hwport = 0, @@ -86,8 +76,7 @@ static struct s3c2410_uartcfg rx3715_uartcfgs[] = { .ucon = 0x3c5, .ulcon = 0x03, .ufcon = 0x51, - .clocks = rx3715_serial_clocks, - .clocks_size = ARRAY_SIZE(rx3715_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL3, }, [1] = { .hwport = 1, @@ -95,8 +84,7 @@ static struct s3c2410_uartcfg rx3715_uartcfgs[] = { .ucon = 0x3c5, .ulcon = 0x03, .ufcon = 0x00, - .clocks = rx3715_serial_clocks, - .clocks_size = ARRAY_SIZE(rx3715_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL3, }, /* IR port */ [2] = { @@ -105,8 +93,7 @@ static struct s3c2410_uartcfg rx3715_uartcfgs[] = { .ucon = 0x3c5, .ulcon = 0x43, .ufcon = 0x51, - .clocks = rx3715_serial_clocks, - .clocks_size = ARRAY_SIZE(rx3715_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL3, } }; diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c index 625219b9cefc..a3aafb6768c9 100644 --- a/arch/arm/mach-s3c64xx/clock.c +++ b/arch/arm/mach-s3c64xx/clock.c @@ -617,16 +617,6 @@ static struct clksrc_clk clksrcs[] = { .sources = &clkset_uhost, }, { .clk = { - .name = "uclk1", - .ctrlbit = S3C_CLKCON_SCLK_UART, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 13, .size = 1 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4 }, - .sources = &clkset_uart, - }, { -/* Where does UCLK0 come from? */ - .clk = { .name = "spi-bus", .devname = "s3c64xx-spi.0", .ctrlbit = S3C_CLKCON_SCLK_SPI0, @@ -695,6 +685,18 @@ static struct clksrc_clk clksrcs[] = { }, }; +/* Where does UCLK0 come from? */ +static struct clksrc_clk clk_sclk_uclk = { + .clk = { + .name = "uclk1", + .ctrlbit = S3C_CLKCON_SCLK_UART, + .enable = s3c64xx_sclk_ctrl, + }, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 13, .size = 1 }, + .reg_div = { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4 }, + .sources = &clkset_uart, +}; + /* Clock initialisation code */ static struct clksrc_clk *init_parents[] = { @@ -703,6 +705,15 @@ static struct clksrc_clk *init_parents[] = { &clk_mout_mpll, }; +static struct clksrc_clk *clksrc_cdev[] = { + &clk_sclk_uclk, +}; + +static struct clk_lookup s3c64xx_clk_lookup[] = { + CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), + CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk), +}; + #define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1) void __init_or_cpufreq s3c64xx_setup_clocks(void) @@ -811,6 +822,8 @@ static struct clk *clks[] __initdata = { void __init s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_divlimit) { + unsigned int cnt; + armclk_mask = armclk_divlimit; s3c24xx_register_baseclocks(xtal); @@ -823,5 +836,9 @@ void __init s3c64xx_register_clocks(unsigned long xtal, s3c24xx_register_clocks(clks1, ARRAY_SIZE(clks1)); s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); + for (cnt = 0; cnt < ARRAY_SIZE(clksrc_cdev); cnt++) + s3c_register_clksrc(clksrc_cdev[cnt], 1); + clkdev_add_table(s3c64xx_clk_lookup, ARRAY_SIZE(s3c64xx_clk_lookup)); + s3c_pwmclk_init(); } diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c index dd2b8daef0cd..97bb6eb921d7 100644 --- a/arch/arm/mach-s5p64x0/clock-s5p6440.c +++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c @@ -422,15 +422,6 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 }, }, { .clk = { - .name = "uclk1", - .ctrlbit = (1 << 5), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_uart, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 }, - .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 }, - }, { - .clk = { .name = "sclk_spi", .devname = "s3c64xx-spi.0", .ctrlbit = (1 << 20), @@ -488,6 +479,17 @@ static struct clksrc_clk clksrcs[] = { }, }; +static struct clksrc_clk clk_sclk_uclk = { + .clk = { + .name = "uclk1", + .ctrlbit = (1 << 5), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 }, +}; + /* Clock initialization code */ static struct clksrc_clk *sysclks[] = { &clk_mout_apll, @@ -506,6 +508,15 @@ static struct clk dummy_apb_pclk = { .id = -1, }; +static struct clksrc_clk *clksrc_cdev[] = { + &clk_sclk_uclk, +}; + +static struct clk_lookup s5p6440_clk_lookup[] = { + CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk), + CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk), +}; + void __init_or_cpufreq s5p6440_setup_clocks(void) { struct clk *xtal_clk; @@ -584,9 +595,12 @@ void __init s5p6440_register_clocks(void) s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); + for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++) + s3c_register_clksrc(clksrc_cdev[ptr], 1); s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + clkdev_add_table(s5p6440_clk_lookup, ARRAY_SIZE(s5p6440_clk_lookup)); s3c24xx_register_clock(&dummy_apb_pclk); diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c index 328a224f0075..bd9ac662b3cd 100644 --- a/arch/arm/mach-s5p64x0/clock-s5p6450.c +++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c @@ -444,15 +444,6 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 }, }, { .clk = { - .name = "uclk1", - .ctrlbit = (1 << 5), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_uart, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 }, - .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 }, - }, { - .clk = { .name = "sclk_spi", .devname = "s3c64xx-spi.0", .ctrlbit = (1 << 20), @@ -537,6 +528,26 @@ static struct clksrc_clk clksrcs[] = { }, }; +static struct clksrc_clk clk_sclk_uclk = { + .clk = { + .name = "uclk1", + .ctrlbit = (1 << 5), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk *clksrc_cdev[] = { + &clk_sclk_uclk, +}; + +static struct clk_lookup s5p6450_clk_lookup[] = { + CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk), + CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk), +}; + /* Clock initialization code */ static struct clksrc_clk *sysclks[] = { &clk_mout_apll, @@ -635,9 +646,12 @@ void __init s5p6450_register_clocks(void) s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); + for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++) + s3c_register_clksrc(clksrc_cdev[ptr], 1); s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + clkdev_add_table(s5p6450_clk_lookup, ARRAY_SIZE(s5p6450_clk_lookup)); s3c24xx_register_clock(&dummy_apb_pclk); diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c index b7555a0fb0fb..fcf0778ae5c4 100644 --- a/arch/arm/mach-s5p64x0/common.c +++ b/arch/arm/mach-s5p64x0/common.c @@ -281,36 +281,7 @@ int __init s5p64x0_init(void) return sysdev_register(&s5p64x0_sysdev); } -static struct s3c24xx_uart_clksrc s5p64x0_serial_clocks[] = { - [0] = { - .name = "pclk_low", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, - [1] = { - .name = "uclk1", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, -}; - /* uart registration process */ - -void __init s5p64x0_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - struct s3c2410_uartcfg *tcfg = cfg; - u32 ucnt; - - for (ucnt = 0; ucnt < no; ucnt++, tcfg++) { - if (!tcfg->clocks) { - tcfg->clocks = s5p64x0_serial_clocks; - tcfg->clocks_size = ARRAY_SIZE(s5p64x0_serial_clocks); - } - } -} - void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no) { int uart; @@ -320,13 +291,11 @@ void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no) s5p_uart_resources[uart].resources->end = S5P6440_PA_UART(uart) + S5P_SZ_UART; } - s5p64x0_common_init_uarts(cfg, no); s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); } void __init s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no) { - s5p64x0_common_init_uarts(cfg, no); s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); } diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c index 442dd4ad12da..f820c0744405 100644 --- a/arch/arm/mach-s5p64x0/dma.c +++ b/arch/arm/mach-s5p64x0/dma.c @@ -38,176 +38,74 @@ static u64 dma_dmamask = DMA_BIT_MASK(32); -struct dma_pl330_peri s5p6440_pdma_peri[22] = { - { - .peri_id = (u8)DMACH_UART0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART3_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART3_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = DMACH_MAX, - }, { - .peri_id = DMACH_MAX, - }, { - .peri_id = (u8)DMACH_PCM0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_PCM0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_SPI1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI1_RX, - .rqtype = DEVTOMEM, - }, +u8 s5p6440_pdma_peri[] = { + DMACH_UART0_RX, + DMACH_UART0_TX, + DMACH_UART1_RX, + DMACH_UART1_TX, + DMACH_UART2_RX, + DMACH_UART2_TX, + DMACH_UART3_RX, + DMACH_UART3_TX, + DMACH_MAX, + DMACH_MAX, + DMACH_PCM0_TX, + DMACH_PCM0_RX, + DMACH_I2S0_TX, + DMACH_I2S0_RX, + DMACH_SPI0_TX, + DMACH_SPI0_RX, + DMACH_MAX, + DMACH_MAX, + DMACH_MAX, + DMACH_MAX, + DMACH_SPI1_TX, + DMACH_SPI1_RX, }; struct dma_pl330_platdata s5p6440_pdma_pdata = { .nr_valid_peri = ARRAY_SIZE(s5p6440_pdma_peri), - .peri = s5p6440_pdma_peri, + .peri_id = s5p6440_pdma_peri, }; -struct dma_pl330_peri s5p6450_pdma_peri[32] = { - { - .peri_id = (u8)DMACH_UART0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART3_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART3_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART4_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART4_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_PCM0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_PCM0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PCM1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_PCM1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PCM2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_PCM2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_USI_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_USI_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_I2S1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PWM, - }, { - .peri_id = (u8)DMACH_UART5_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART5_TX, - .rqtype = MEMTODEV, - }, +u8 s5p6450_pdma_peri[] = { + DMACH_UART0_RX, + DMACH_UART0_TX, + DMACH_UART1_RX, + DMACH_UART1_TX, + DMACH_UART2_RX, + DMACH_UART2_TX, + DMACH_UART3_RX, + DMACH_UART3_TX, + DMACH_UART4_RX, + DMACH_UART4_TX, + DMACH_PCM0_TX, + DMACH_PCM0_RX, + DMACH_I2S0_TX, + DMACH_I2S0_RX, + DMACH_SPI0_TX, + DMACH_SPI0_RX, + DMACH_PCM1_TX, + DMACH_PCM1_RX, + DMACH_PCM2_TX, + DMACH_PCM2_RX, + DMACH_SPI1_TX, + DMACH_SPI1_RX, + DMACH_USI_TX, + DMACH_USI_RX, + DMACH_MAX, + DMACH_I2S1_TX, + DMACH_I2S1_RX, + DMACH_I2S2_TX, + DMACH_I2S2_RX, + DMACH_PWM, + DMACH_UART5_RX, + DMACH_UART5_TX, }; struct dma_pl330_platdata s5p6450_pdma_pdata = { .nr_valid_peri = ARRAY_SIZE(s5p6450_pdma_peri), - .peri = s5p6450_pdma_peri, + .peri_id = s5p6450_pdma_peri, }; struct amba_device s5p64x0_device_pdma = { @@ -227,10 +125,15 @@ struct amba_device s5p64x0_device_pdma = { static int __init s5p64x0_dma_init(void) { - if (soc_is_s5p6450()) + if (soc_is_s5p6450()) { + dma_cap_set(DMA_SLAVE, s5p6450_pdma_pdata.cap_mask); + dma_cap_set(DMA_CYCLIC, s5p6450_pdma_pdata.cap_mask); s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata; - else + } else { + dma_cap_set(DMA_SLAVE, s5p6440_pdma_pdata.cap_mask); + dma_cap_set(DMA_CYCLIC, s5p6440_pdma_pdata.cap_mask); s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata; + } amba_device_register(&s5p64x0_device_pdma, &iomem_resource); diff --git a/arch/arm/mach-s5p64x0/include/mach/irqs.h b/arch/arm/mach-s5p64x0/include/mach/irqs.h index 53982db9d259..5b845e849b30 100644 --- a/arch/arm/mach-s5p64x0/include/mach/irqs.h +++ b/arch/arm/mach-s5p64x0/include/mach/irqs.h @@ -141,6 +141,8 @@ #define IRQ_EINT_GROUP(grp, x) (IRQ_EINT_GROUP##grp##_BASE + (x)) +#define IRQ_TIMER_BASE (11) + /* Set the default NR_IRQS */ #define NR_IRQS (IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR + 1) diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c index c4c74893f53c..49f8c30d58da 100644 --- a/arch/arm/mach-s5pc100/clock.c +++ b/arch/arm/mach-s5pc100/clock.c @@ -963,16 +963,6 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV2, .shift = 12, .size = 4 }, }, { .clk = { - .name = "uclk1", - .ctrlbit = (1 << 3), - .enable = s5pc100_sclk0_ctrl, - - }, - .sources = &clk_src_group2, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 }, - }, { - .clk = { .name = "sclk_mixer", .ctrlbit = (1 << 6), .enable = s5pc100_sclk0_ctrl, @@ -1099,6 +1089,17 @@ static struct clksrc_clk clksrcs[] = { }, }; +static struct clksrc_clk clk_sclk_uart = { + .clk = { + .name = "uclk1", + .ctrlbit = (1 << 3), + .enable = s5pc100_sclk0_ctrl, + }, + .sources = &clk_src_group2, + .reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 }, + .reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 }, +}; + /* Clock initialisation code */ static struct clksrc_clk *sysclks[] = { &clk_mout_apll, @@ -1128,6 +1129,10 @@ static struct clksrc_clk *sysclks[] = { &clk_sclk_spdif, }; +static struct clksrc_clk *clksrc_cdev[] = { + &clk_sclk_uart, +}; + void __init_or_cpufreq s5pc100_setup_clocks(void) { unsigned long xtal; @@ -1267,6 +1272,11 @@ static struct clk *clks[] __initdata = { &clk_pcmcdclk1, }; +static struct clk_lookup s5pc100_clk_lookup[] = { + CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), + CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uart.clk), +}; + void __init s5pc100_register_clocks(void) { int ptr; @@ -1278,9 +1288,12 @@ void __init s5pc100_register_clocks(void) s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); + for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++) + s3c_register_clksrc(clksrc_cdev[ptr], 1); s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + clkdev_add_table(s5pc100_clk_lookup, ARRAY_SIZE(s5pc100_clk_lookup)); s3c24xx_register_clock(&dummy_apb_pclk); diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c index 065a087f5a8b..c841f4d313f2 100644 --- a/arch/arm/mach-s5pc100/dma.c +++ b/arch/arm/mach-s5pc100/dma.c @@ -35,100 +35,42 @@ static u64 dma_dmamask = DMA_BIT_MASK(32); -struct dma_pl330_peri pdma0_peri[30] = { - { - .peri_id = (u8)DMACH_UART0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART3_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART3_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = DMACH_IRDA, - }, { - .peri_id = (u8)DMACH_I2S0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S0S_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_AC97_MICIN, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_AC97_PCMIN, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_AC97_PCMOUT, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_EXTERNAL, - }, { - .peri_id = (u8)DMACH_PWM, - }, { - .peri_id = (u8)DMACH_SPDIF, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_HSI_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_HSI_TX, - .rqtype = MEMTODEV, - }, +u8 pdma0_peri[] = { + DMACH_UART0_RX, + DMACH_UART0_TX, + DMACH_UART1_RX, + DMACH_UART1_TX, + DMACH_UART2_RX, + DMACH_UART2_TX, + DMACH_UART3_RX, + DMACH_UART3_TX, + DMACH_IRDA, + DMACH_I2S0_RX, + DMACH_I2S0_TX, + DMACH_I2S0S_TX, + DMACH_I2S1_RX, + DMACH_I2S1_TX, + DMACH_I2S2_RX, + DMACH_I2S2_TX, + DMACH_SPI0_RX, + DMACH_SPI0_TX, + DMACH_SPI1_RX, + DMACH_SPI1_TX, + DMACH_SPI2_RX, + DMACH_SPI2_TX, + DMACH_AC97_MICIN, + DMACH_AC97_PCMIN, + DMACH_AC97_PCMOUT, + DMACH_EXTERNAL, + DMACH_PWM, + DMACH_SPDIF, + DMACH_HSI_RX, + DMACH_HSI_TX, }; struct dma_pl330_platdata s5pc100_pdma0_pdata = { .nr_valid_peri = ARRAY_SIZE(pdma0_peri), - .peri = pdma0_peri, + .peri_id = pdma0_peri, }; struct amba_device s5pc100_device_pdma0 = { @@ -147,98 +89,42 @@ struct amba_device s5pc100_device_pdma0 = { .periphid = 0x00041330, }; -struct dma_pl330_peri pdma1_peri[30] = { - { - .peri_id = (u8)DMACH_UART0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART3_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART3_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = DMACH_IRDA, - }, { - .peri_id = (u8)DMACH_I2S0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S0S_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_PCM0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PCM1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_PCM1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PCM1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_MSM_REQ0, - }, { - .peri_id = (u8)DMACH_MSM_REQ1, - }, { - .peri_id = (u8)DMACH_MSM_REQ2, - }, { - .peri_id = (u8)DMACH_MSM_REQ3, - }, +u8 pdma1_peri[] = { + DMACH_UART0_RX, + DMACH_UART0_TX, + DMACH_UART1_RX, + DMACH_UART1_TX, + DMACH_UART2_RX, + DMACH_UART2_TX, + DMACH_UART3_RX, + DMACH_UART3_TX, + DMACH_IRDA, + DMACH_I2S0_RX, + DMACH_I2S0_TX, + DMACH_I2S0S_TX, + DMACH_I2S1_RX, + DMACH_I2S1_TX, + DMACH_I2S2_RX, + DMACH_I2S2_TX, + DMACH_SPI0_RX, + DMACH_SPI0_TX, + DMACH_SPI1_RX, + DMACH_SPI1_TX, + DMACH_SPI2_RX, + DMACH_SPI2_TX, + DMACH_PCM0_RX, + DMACH_PCM0_TX, + DMACH_PCM1_RX, + DMACH_PCM1_TX, + DMACH_MSM_REQ0, + DMACH_MSM_REQ1, + DMACH_MSM_REQ2, + DMACH_MSM_REQ3, }; struct dma_pl330_platdata s5pc100_pdma1_pdata = { .nr_valid_peri = ARRAY_SIZE(pdma1_peri), - .peri = pdma1_peri, + .peri_id = pdma1_peri, }; struct amba_device s5pc100_device_pdma1 = { @@ -259,7 +145,12 @@ struct amba_device s5pc100_device_pdma1 = { static int __init s5pc100_dma_init(void) { + dma_cap_set(DMA_SLAVE, s5pc100_pdma0_pdata.cap_mask); + dma_cap_set(DMA_CYCLIC, s5pc100_pdma0_pdata.cap_mask); amba_device_register(&s5pc100_device_pdma0, &iomem_resource); + + dma_cap_set(DMA_SLAVE, s5pc100_pdma1_pdata.cap_mask); + dma_cap_set(DMA_CYCLIC, s5pc100_pdma1_pdata.cap_mask); amba_device_register(&s5pc100_device_pdma1, &iomem_resource); return 0; diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h index d2eb4757381f..2870f12c7926 100644 --- a/arch/arm/mach-s5pc100/include/mach/irqs.h +++ b/arch/arm/mach-s5pc100/include/mach/irqs.h @@ -97,6 +97,8 @@ #define IRQ_SDMFIQ S5P_IRQ_VIC2(31) #define IRQ_VIC_END S5P_IRQ_VIC2(31) +#define IRQ_TIMER_BASE (11) + #define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) #define S5P_EINT_BASE2 (IRQ_VIC_END + 1) diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index f2dbf5f75a2c..ed60b2683bf0 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -810,46 +810,6 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV6, .shift = 12, .size = 3 }, }, { .clk = { - .name = "uclk1", - .devname = "s5pv210-uart.0", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 12), - }, - .sources = &clkset_uart, - .reg_src = { .reg = S5P_CLK_SRC4, .shift = 16, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 }, - }, { - .clk = { - .name = "uclk1", - .devname = "s5pv210-uart.1", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 13), - }, - .sources = &clkset_uart, - .reg_src = { .reg = S5P_CLK_SRC4, .shift = 20, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 }, - }, { - .clk = { - .name = "uclk1", - .devname = "s5pv210-uart.2", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 14), - }, - .sources = &clkset_uart, - .reg_src = { .reg = S5P_CLK_SRC4, .shift = 24, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 24, .size = 4 }, - }, { - .clk = { - .name = "uclk1", - .devname = "s5pv210-uart.3", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 15), - }, - .sources = &clkset_uart, - .reg_src = { .reg = S5P_CLK_SRC4, .shift = 28, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 28, .size = 4 }, - }, { - .clk = { .name = "sclk_fimc", .devname = "s5pv210-fimc.0", .enable = s5pv210_clk_mask1_ctrl, @@ -1023,6 +983,61 @@ static struct clksrc_clk clksrcs[] = { }, }; +static struct clksrc_clk clk_sclk_uart0 = { + .clk = { + .name = "uclk1", + .devname = "s5pv210-uart.0", + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 12), + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P_CLK_SRC4, .shift = 16, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_uart1 = { + .clk = { + .name = "uclk1", + .devname = "s5pv210-uart.1", + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 13), + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P_CLK_SRC4, .shift = 20, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_uart2 = { + .clk = { + .name = "uclk1", + .devname = "s5pv210-uart.2", + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 14), + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P_CLK_SRC4, .shift = 24, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 24, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_uart3 = { + .clk = { + .name = "uclk1", + .devname = "s5pv210-uart.3", + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 15), + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P_CLK_SRC4, .shift = 28, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 28, .size = 4 }, +}; + +static struct clksrc_clk *clksrc_cdev[] = { + &clk_sclk_uart0, + &clk_sclk_uart1, + &clk_sclk_uart2, + &clk_sclk_uart3, +}; + /* Clock initialisation code */ static struct clksrc_clk *sysclks[] = { &clk_mout_apll, @@ -1262,6 +1277,14 @@ static struct clk *clks[] __initdata = { &clk_pcmcdclk2, }; +static struct clk_lookup s5pv210_clk_lookup[] = { + CLKDEV_INIT(NULL, "clk_uart_baud0", &clk_p), + CLKDEV_INIT("s5pv210-uart.0", "clk_uart_baud1", &clk_sclk_uart0.clk), + CLKDEV_INIT("s5pv210-uart.1", "clk_uart_baud1", &clk_sclk_uart1.clk), + CLKDEV_INIT("s5pv210-uart.2", "clk_uart_baud1", &clk_sclk_uart2.clk), + CLKDEV_INIT("s5pv210-uart.3", "clk_uart_baud1", &clk_sclk_uart3.clk), +}; + void __init s5pv210_register_clocks(void) { int ptr; @@ -1274,11 +1297,15 @@ void __init s5pv210_register_clocks(void) for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++) s3c_register_clksrc(sclk_tv[ptr], 1); + for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++) + s3c_register_clksrc(clksrc_cdev[ptr], 1); + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + clkdev_add_table(s5pv210_clk_lookup, ARRAY_SIZE(s5pv210_clk_lookup)); s3c24xx_register_clock(&dummy_apb_pclk); s3c_pwmclk_init(); diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c index a4921bc9f1dc..b9adefd9838e 100644 --- a/arch/arm/mach-s5pv210/common.c +++ b/arch/arm/mach-s5pv210/common.c @@ -253,28 +253,9 @@ int __init s5pv210_init(void) return sysdev_register(&s5pv210_sysdev); } -static struct s3c24xx_uart_clksrc s5pv210_serial_clocks[] = { - [0] = { - .name = "pclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, -}; - /* uart registration process */ void __init s5pv210_init_uarts(struct s3c2410_uartcfg *cfg, int no) { - struct s3c2410_uartcfg *tcfg = cfg; - u32 ucnt; - - for (ucnt = 0; ucnt < no; ucnt++, tcfg++) { - if (!tcfg->clocks) { - tcfg->clocks = s5pv210_serial_clocks; - tcfg->clocks_size = ARRAY_SIZE(s5pv210_serial_clocks); - } - } - s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no); } diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c index 86b749c18b77..a6113e0267f2 100644 --- a/arch/arm/mach-s5pv210/dma.c +++ b/arch/arm/mach-s5pv210/dma.c @@ -35,90 +35,40 @@ static u64 dma_dmamask = DMA_BIT_MASK(32); -struct dma_pl330_peri pdma0_peri[28] = { - { - .peri_id = (u8)DMACH_UART0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART3_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART3_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = DMACH_MAX, - }, { - .peri_id = (u8)DMACH_I2S0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S0S_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_SPI0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_AC97_MICIN, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_AC97_PCMIN, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_AC97_PCMOUT, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_PWM, - }, { - .peri_id = (u8)DMACH_SPDIF, - .rqtype = MEMTODEV, - }, +u8 pdma0_peri[] = { + DMACH_UART0_RX, + DMACH_UART0_TX, + DMACH_UART1_RX, + DMACH_UART1_TX, + DMACH_UART2_RX, + DMACH_UART2_TX, + DMACH_UART3_RX, + DMACH_UART3_TX, + DMACH_MAX, + DMACH_I2S0_RX, + DMACH_I2S0_TX, + DMACH_I2S0S_TX, + DMACH_I2S1_RX, + DMACH_I2S1_TX, + DMACH_MAX, + DMACH_MAX, + DMACH_SPI0_RX, + DMACH_SPI0_TX, + DMACH_SPI1_RX, + DMACH_SPI1_TX, + DMACH_MAX, + DMACH_MAX, + DMACH_AC97_MICIN, + DMACH_AC97_PCMIN, + DMACH_AC97_PCMOUT, + DMACH_MAX, + DMACH_PWM, + DMACH_SPDIF, }; struct dma_pl330_platdata s5pv210_pdma0_pdata = { .nr_valid_peri = ARRAY_SIZE(pdma0_peri), - .peri = pdma0_peri, + .peri_id = pdma0_peri, }; struct amba_device s5pv210_device_pdma0 = { @@ -137,102 +87,44 @@ struct amba_device s5pv210_device_pdma0 = { .periphid = 0x00041330, }; -struct dma_pl330_peri pdma1_peri[32] = { - { - .peri_id = (u8)DMACH_UART0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART3_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART3_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = DMACH_MAX, - }, { - .peri_id = (u8)DMACH_I2S0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S0S_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_PCM0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PCM0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_PCM1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PCM1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_MSM_REQ0, - }, { - .peri_id = (u8)DMACH_MSM_REQ1, - }, { - .peri_id = (u8)DMACH_MSM_REQ2, - }, { - .peri_id = (u8)DMACH_MSM_REQ3, - }, { - .peri_id = (u8)DMACH_PCM2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PCM2_TX, - .rqtype = MEMTODEV, - }, +u8 pdma1_peri[] = { + DMACH_UART0_RX, + DMACH_UART0_TX, + DMACH_UART1_RX, + DMACH_UART1_TX, + DMACH_UART2_RX, + DMACH_UART2_TX, + DMACH_UART3_RX, + DMACH_UART3_TX, + DMACH_MAX, + DMACH_I2S0_RX, + DMACH_I2S0_TX, + DMACH_I2S0S_TX, + DMACH_I2S1_RX, + DMACH_I2S1_TX, + DMACH_I2S2_RX, + DMACH_I2S2_TX, + DMACH_SPI0_RX, + DMACH_SPI0_TX, + DMACH_SPI1_RX, + DMACH_SPI1_TX, + DMACH_MAX, + DMACH_MAX, + DMACH_PCM0_RX, + DMACH_PCM0_TX, + DMACH_PCM1_RX, + DMACH_PCM1_TX, + DMACH_MSM_REQ0, + DMACH_MSM_REQ1, + DMACH_MSM_REQ2, + DMACH_MSM_REQ3, + DMACH_PCM2_RX, + DMACH_PCM2_TX, }; struct dma_pl330_platdata s5pv210_pdma1_pdata = { .nr_valid_peri = ARRAY_SIZE(pdma1_peri), - .peri = pdma1_peri, + .peri_id = pdma1_peri, }; struct amba_device s5pv210_device_pdma1 = { @@ -253,7 +145,12 @@ struct amba_device s5pv210_device_pdma1 = { static int __init s5pv210_dma_init(void) { + dma_cap_set(DMA_SLAVE, s5pv210_pdma0_pdata.cap_mask); + dma_cap_set(DMA_CYCLIC, s5pv210_pdma0_pdata.cap_mask); amba_device_register(&s5pv210_device_pdma0, &iomem_resource); + + dma_cap_set(DMA_SLAVE, s5pv210_pdma1_pdata.cap_mask); + dma_cap_set(DMA_CYCLIC, s5pv210_pdma1_pdata.cap_mask); amba_device_register(&s5pv210_device_pdma1, &iomem_resource); return 0; diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h index 5e0de3a31f3d..e777e010ed2e 100644 --- a/arch/arm/mach-s5pv210/include/mach/irqs.h +++ b/arch/arm/mach-s5pv210/include/mach/irqs.h @@ -118,6 +118,8 @@ #define IRQ_MDNIE3 S5P_IRQ_VIC3(8) #define IRQ_VIC_END S5P_IRQ_VIC3(31) +#define IRQ_TIMER_BASE (11) + #define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) #define S5P_EINT_BASE2 (IRQ_VIC_END + 1) diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c index ed77f85b9951..85f6ee672225 100644 --- a/arch/arm/mach-sa1100/nanoengine.c +++ b/arch/arm/mach-sa1100/nanoengine.c @@ -19,6 +19,7 @@ #include <asm/mach-types.h> #include <asm/setup.h> +#include <asm/page.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index fa6602491d54..69e33535dee6 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -12,7 +12,6 @@ #include <linux/errno.h> #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/sched.h> /* just for sched_clock() - funny that */ #include <linux/timex.h> #include <linux/clockchips.h> @@ -20,29 +19,9 @@ #include <asm/sched_clock.h> #include <mach/hardware.h> -/* - * This is the SA11x0 sched_clock implementation. - */ -static DEFINE_CLOCK_DATA(cd); - -/* - * Constants generated by clocks_calc_mult_shift(m, s, 3.6864MHz, - * NSEC_PER_SEC, 60). - * This gives a resolution of about 271ns and a wrap period of about 19min. - */ -#define SC_MULT 2275555556u -#define SC_SHIFT 23 - -unsigned long long notrace sched_clock(void) -{ - u32 cyc = OSCR; - return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT); -} - -static void notrace sa1100_update_sched_clock(void) +static u32 notrace sa1100_read_sched_clock(void) { - u32 cyc = OSCR; - update_sched_clock(&cd, cyc, (u32)~0); + return OSCR; } #define MIN_OSCR_DELTA 2 @@ -109,8 +88,7 @@ static void __init sa1100_timer_init(void) OIER = 0; OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3; - init_fixed_sched_clock(&cd, sa1100_update_sched_clock, 32, - 3686400, SC_MULT, SC_SHIFT); + setup_sched_clock(sa1100_read_sched_clock, 32, 3686400); clockevents_calc_mult_shift(&ckevt_sa1100_osmr0, 3686400, 4); ckevt_sa1100_osmr0.max_delta_ns = diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index f71fa3c13c8c..a4e6ca04e319 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -466,8 +466,6 @@ static struct map_desc ag5evm_io_desc[] __initdata = { static void __init ag5evm_map_io(void) { iotable_init(ag5evm_io_desc, ARRAY_SIZE(ag5evm_io_desc)); - /* DMA memory at 0xf6000000 - 0xffdfffff */ - init_consistent_dma_size(158 << 20); /* setup early devices and console here as well */ sh73a0_add_early_devices(); diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 4c865ece9ac4..6a6f9f7568c2 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -1172,8 +1172,6 @@ static struct map_desc ap4evb_io_desc[] __initdata = { static void __init ap4evb_map_io(void) { iotable_init(ap4evb_io_desc, ARRAY_SIZE(ap4evb_io_desc)); - /* DMA memory at 0xf6000000 - 0xffdfffff */ - init_consistent_dma_size(158 << 20); /* setup early devices and console here as well */ sh7372_add_early_devices(); diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c index 8b620bf06221..72d557281b1f 100644 --- a/arch/arm/mach-shmobile/board-g3evm.c +++ b/arch/arm/mach-shmobile/board-g3evm.c @@ -261,8 +261,6 @@ static struct map_desc g3evm_io_desc[] __initdata = { static void __init g3evm_map_io(void) { iotable_init(g3evm_io_desc, ARRAY_SIZE(g3evm_io_desc)); - /* DMA memory at 0xf6000000 - 0xffdfffff */ - init_consistent_dma_size(158 << 20); /* setup early devices and console here as well */ sh7367_add_early_devices(); diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c index 7719ddc5f591..2220b885cff5 100644 --- a/arch/arm/mach-shmobile/board-g4evm.c +++ b/arch/arm/mach-shmobile/board-g4evm.c @@ -275,8 +275,6 @@ static struct map_desc g4evm_io_desc[] __initdata = { static void __init g4evm_map_io(void) { iotable_init(g4evm_io_desc, ARRAY_SIZE(g4evm_io_desc)); - /* DMA memory at 0xf6000000 - 0xffdfffff */ - init_consistent_dma_size(158 << 20); /* setup early devices and console here as well */ sh7377_add_early_devices(); diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 9c5e598e0e3d..ed5256687397 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -1390,8 +1390,6 @@ static struct map_desc mackerel_io_desc[] __initdata = { static void __init mackerel_map_io(void) { iotable_init(mackerel_io_desc, ARRAY_SIZE(mackerel_io_desc)); - /* DMA memory at 0xf6000000 - 0xffdfffff */ - init_consistent_dma_size(158 << 20); /* setup early devices and console here as well */ sh7372_add_early_devices(); diff --git a/arch/arm/mach-shmobile/include/mach/gpio.h b/arch/arm/mach-shmobile/include/mach/gpio.h index 7bf0890e16ba..de795b42232a 100644 --- a/arch/arm/mach-shmobile/include/mach/gpio.h +++ b/arch/arm/mach-shmobile/include/mach/gpio.h @@ -12,8 +12,6 @@ #include <linux/kernel.h> #include <linux/errno.h> - -#define ARCH_NR_GPIOS 1024 #include <linux/sh_pfc.h> #ifdef CONFIG_GPIOLIB diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c index e2272d263a83..732c724008b1 100644 --- a/arch/arm/mach-tegra/timer.c +++ b/arch/arm/mach-tegra/timer.c @@ -19,7 +19,6 @@ #include <linux/init.h> #include <linux/err.h> -#include <linux/sched.h> #include <linux/time.h> #include <linux/interrupt.h> #include <linux/irq.h> @@ -106,25 +105,9 @@ static struct clock_event_device tegra_clockevent = { .set_mode = tegra_timer_set_mode, }; -static DEFINE_CLOCK_DATA(cd); - -/* - * Constants generated by clocks_calc_mult_shift(m, s, 1MHz, NSEC_PER_SEC, 60). - * This gives a resolution of about 1us and a wrap period of about 1h11min. - */ -#define SC_MULT 4194304000u -#define SC_SHIFT 22 - -unsigned long long notrace sched_clock(void) -{ - u32 cyc = timer_readl(TIMERUS_CNTR_1US); - return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT); -} - -static void notrace tegra_update_sched_clock(void) +static u32 notrace tegra_read_sched_clock(void) { - u32 cyc = timer_readl(TIMERUS_CNTR_1US); - update_sched_clock(&cd, cyc, (u32)~0); + return timer_readl(TIMERUS_CNTR_1US); } /* @@ -218,8 +201,7 @@ static void __init tegra_init_timer(void) WARN(1, "Unknown clock rate"); } - init_fixed_sched_clock(&cd, tegra_update_sched_clock, 32, - 1000000, SC_MULT, SC_SHIFT); + setup_sched_clock(tegra_read_sched_clock, 32, 1000000); if (clocksource_mmio_init(timer_reg_base + TIMERUS_CNTR_1US, "timer_us", 1000000, 300, 32, clocksource_mmio_readl_up)) { diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c index 5f51bdeef0ef..bc1c7897e82d 100644 --- a/arch/arm/mach-u300/timer.c +++ b/arch/arm/mach-u300/timer.c @@ -9,7 +9,6 @@ * Author: Linus Walleij <linus.walleij@stericsson.com> */ #include <linux/interrupt.h> -#include <linux/sched.h> #include <linux/time.h> #include <linux/timex.h> #include <linux/clockchips.h> @@ -337,18 +336,10 @@ static struct irqaction u300_timer_irq = { * this wraps around for now, since it is just a relative time * stamp. (Inspired by OMAP implementation.) */ -static DEFINE_CLOCK_DATA(cd); -unsigned long long notrace sched_clock(void) +static u32 notrace u300_read_sched_clock(void) { - u32 cyc = readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC); - return cyc_to_sched_clock(&cd, cyc, (u32)~0); -} - -static void notrace u300_update_sched_clock(void) -{ - u32 cyc = readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC); - update_sched_clock(&cd, cyc, (u32)~0); + return readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC); } @@ -366,7 +357,7 @@ static void __init u300_timer_init(void) clk_enable(clk); rate = clk_get_rate(clk); - init_sched_clock(&cd, u300_update_sched_clock, 32, rate); + setup_sched_clock(u300_read_sched_clock, 32, rate); /* * Disable the "OS" and "DD" timers - these are designed for Symbian! diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c index 9de1af008094..5323286b265e 100644 --- a/arch/arm/mach-ux500/cpu-db5500.c +++ b/arch/arm/mach-ux500/cpu-db5500.c @@ -30,12 +30,11 @@ static struct map_desc u5500_uart_io_desc[] __initdata = { }; static struct map_desc u5500_io_desc[] __initdata = { - __IO_DEV_DESC(U5500_GIC_CPU_BASE, SZ_4K), + /* SCU base also covers GIC CPU BASE and TWD with its 4K page */ + __IO_DEV_DESC(U5500_SCU_BASE, SZ_4K), __IO_DEV_DESC(U5500_GIC_DIST_BASE, SZ_4K), __IO_DEV_DESC(U5500_L2CC_BASE, SZ_4K), - __IO_DEV_DESC(U5500_TWD_BASE, SZ_4K), __IO_DEV_DESC(U5500_MTU0_BASE, SZ_4K), - __IO_DEV_DESC(U5500_SCU_BASE, SZ_4K), __IO_DEV_DESC(U5500_BACKUPRAM0_BASE, SZ_8K), __IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K), diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 13e8890a8b8a..7f2729c05db3 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -35,12 +35,11 @@ static struct map_desc u8500_uart_io_desc[] __initdata = { }; static struct map_desc u8500_io_desc[] __initdata = { - __IO_DEV_DESC(U8500_GIC_CPU_BASE, SZ_4K), + /* SCU base also covers GIC CPU BASE and TWD with its 4K page */ + __IO_DEV_DESC(U8500_SCU_BASE, SZ_4K), __IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K), __IO_DEV_DESC(U8500_L2CC_BASE, SZ_4K), - __IO_DEV_DESC(U8500_TWD_BASE, SZ_4K), __IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K), - __IO_DEV_DESC(U8500_SCU_BASE, SZ_4K), __IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K), __IO_DEV_DESC(U8500_CLKRST1_BASE, SZ_4K), diff --git a/arch/arm/mach-ux500/include/mach/gpio.h b/arch/arm/mach-ux500/include/mach/gpio.h index 7389df911b1a..c01ef66537f3 100644 --- a/arch/arm/mach-ux500/include/mach/gpio.h +++ b/arch/arm/mach-ux500/include/mach/gpio.h @@ -1,10 +1,5 @@ #ifndef __ASM_ARCH_GPIO_H #define __ASM_ARCH_GPIO_H -/* - * 288 (#267 is the highest one actually hooked up) onchip GPIOs, plus enough - * room for a couple of GPIO expanders. - */ -#define ARCH_NR_GPIOS 350 #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 931148487f0b..9b3d0fbaee72 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -8,5 +8,7 @@ config ARCH_VEXPRESS_CA9X4 select ARM_ERRATA_720789 select ARM_ERRATA_751472 select ARM_ERRATA_753970 + select HAVE_SMP + select MIGHT_HAVE_CACHE_L2X0 endmenu diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 5cf7922ff5e7..4cefb57d9ed2 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -833,14 +833,23 @@ config CACHE_FEROCEON_L2_WRITETHROUGH Say Y here to use the Feroceon L2 cache in writethrough mode. Unless you specifically require this, say N for writeback mode. +config MIGHT_HAVE_CACHE_L2X0 + bool + help + This option should be selected by machines which have a L2x0 + or PL310 cache controller, but where its use is optional. + + The only effect of this option is to make CACHE_L2X0 and + related options available to the user for configuration. + + Boards or SoCs which always require the cache controller + support to be present should select CACHE_L2X0 directly + instead of this option, thus preventing the user from + inadvertently configuring a broken kernel. + config CACHE_L2X0 - bool "Enable the L2x0 outer cache controller" - depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \ - REALVIEW_EB_A9MP || ARCH_IMX_V6_V7 || MACH_REALVIEW_PBX || \ - ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \ - ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \ - ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX || ARCH_HIGHBANK - default y + bool "Enable the L2x0 outer cache controller" if MIGHT_HAVE_CACHE_L2X0 + default MIGHT_HAVE_CACHE_L2X0 select OUTER_CACHE select OUTER_CACHE_SYNC help diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index eb5520fc755f..bb7eac381a8e 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -220,7 +220,7 @@ static inline bool access_error(unsigned int fsr, struct vm_area_struct *vma) static int __kprobes __do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr, - struct task_struct *tsk) + unsigned int flags, struct task_struct *tsk) { struct vm_area_struct *vma; int fault; @@ -242,18 +242,7 @@ good_area: goto out; } - /* - * If for any reason at all we couldn't handle the fault, make - * sure we exit gracefully rather than endlessly redo the fault. - */ - fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, (fsr & FSR_WRITE) ? FAULT_FLAG_WRITE : 0); - if (unlikely(fault & VM_FAULT_ERROR)) - return fault; - if (fault & VM_FAULT_MAJOR) - tsk->maj_flt++; - else - tsk->min_flt++; - return fault; + return handle_mm_fault(mm, vma, addr & PAGE_MASK, flags); check_stack: if (vma->vm_flags & VM_GROWSDOWN && !expand_stack(vma, addr)) @@ -268,6 +257,9 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) struct task_struct *tsk; struct mm_struct *mm; int fault, sig, code; + int write = fsr & FSR_WRITE; + unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE | + (write ? FAULT_FLAG_WRITE : 0); if (notify_page_fault(regs, fsr)) return 0; @@ -294,6 +286,7 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) if (!down_read_trylock(&mm->mmap_sem)) { if (!user_mode(regs) && !search_exception_tables(regs->ARM_pc)) goto no_context; +retry: down_read(&mm->mmap_sem); } else { /* @@ -309,14 +302,41 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) #endif } - fault = __do_page_fault(mm, addr, fsr, tsk); - up_read(&mm->mmap_sem); + fault = __do_page_fault(mm, addr, fsr, flags, tsk); + + /* If we need to retry but a fatal signal is pending, handle the + * signal first. We do not need to release the mmap_sem because + * it would already be released in __lock_page_or_retry in + * mm/filemap.c. */ + if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current)) + return 0; + + /* + * Major/minor page fault accounting is only done on the + * initial attempt. If we go through a retry, it is extremely + * likely that the page will be found in page cache at that point. + */ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr); - if (fault & VM_FAULT_MAJOR) - perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, regs, addr); - else if (fault & VM_FAULT_MINOR) - perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, regs, addr); + if (flags & FAULT_FLAG_ALLOW_RETRY) { + if (fault & VM_FAULT_MAJOR) { + tsk->maj_flt++; + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, + regs, addr); + } else { + tsk->min_flt++; + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, + regs, addr); + } + if (fault & VM_FAULT_RETRY) { + /* Clear FAULT_FLAG_ALLOW_RETRY to avoid any risk + * of starvation. */ + flags &= ~FAULT_FLAG_ALLOW_RETRY; + goto retry; + } + } + + up_read(&mm->mmap_sem); /* * Handle the "normal" case first - VM_FAULT_MAJOR / VM_FAULT_MINOR diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index 44b628e4d6ea..ce8cb1970d7a 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -11,10 +11,49 @@ #include <linux/random.h> #include <asm/cachetype.h> +static inline unsigned long COLOUR_ALIGN_DOWN(unsigned long addr, + unsigned long pgoff) +{ + unsigned long base = addr & ~(SHMLBA-1); + unsigned long off = (pgoff << PAGE_SHIFT) & (SHMLBA-1); + + if (base + off <= addr) + return base + off; + + return base - off; +} + #define COLOUR_ALIGN(addr,pgoff) \ ((((addr)+SHMLBA-1)&~(SHMLBA-1)) + \ (((pgoff)<<PAGE_SHIFT) & (SHMLBA-1))) +/* gap between mmap and stack */ +#define MIN_GAP (128*1024*1024UL) +#define MAX_GAP ((TASK_SIZE)/6*5) + +static int mmap_is_legacy(void) +{ + if (current->personality & ADDR_COMPAT_LAYOUT) + return 1; + + if (rlimit(RLIMIT_STACK) == RLIM_INFINITY) + return 1; + + return sysctl_legacy_va_layout; +} + +static unsigned long mmap_base(unsigned long rnd) +{ + unsigned long gap = rlimit(RLIMIT_STACK); + + if (gap < MIN_GAP) + gap = MIN_GAP; + else if (gap > MAX_GAP) + gap = MAX_GAP; + + return PAGE_ALIGN(TASK_SIZE - gap - rnd); +} + /* * We need to ensure that shared mappings are correctly aligned to * avoid aliasing issues with VIPT caches. We need to ensure that @@ -68,13 +107,9 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, if (len > mm->cached_hole_size) { start_addr = addr = mm->free_area_cache; } else { - start_addr = addr = TASK_UNMAPPED_BASE; + start_addr = addr = mm->mmap_base; mm->cached_hole_size = 0; } - /* 8 bits of randomness in 20 address space bits */ - if ((current->flags & PF_RANDOMIZE) && - !(current->personality & ADDR_NO_RANDOMIZE)) - addr += (get_random_int() % (1 << 8)) << PAGE_SHIFT; full_search: if (do_align) @@ -111,6 +146,134 @@ full_search: } } +unsigned long +arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, + const unsigned long len, const unsigned long pgoff, + const unsigned long flags) +{ + struct vm_area_struct *vma; + struct mm_struct *mm = current->mm; + unsigned long addr = addr0; + int do_align = 0; + int aliasing = cache_is_vipt_aliasing(); + + /* + * We only need to do colour alignment if either the I or D + * caches alias. + */ + if (aliasing) + do_align = filp || (flags & MAP_SHARED); + + /* requested length too big for entire address space */ + if (len > TASK_SIZE) + return -ENOMEM; + + if (flags & MAP_FIXED) { + if (aliasing && flags & MAP_SHARED && + (addr - (pgoff << PAGE_SHIFT)) & (SHMLBA - 1)) + return -EINVAL; + return addr; + } + + /* requesting a specific address */ + if (addr) { + if (do_align) + addr = COLOUR_ALIGN(addr, pgoff); + else + addr = PAGE_ALIGN(addr); + vma = find_vma(mm, addr); + if (TASK_SIZE - len >= addr && + (!vma || addr + len <= vma->vm_start)) + return addr; + } + + /* check if free_area_cache is useful for us */ + if (len <= mm->cached_hole_size) { + mm->cached_hole_size = 0; + mm->free_area_cache = mm->mmap_base; + } + + /* either no address requested or can't fit in requested address hole */ + addr = mm->free_area_cache; + if (do_align) { + unsigned long base = COLOUR_ALIGN_DOWN(addr - len, pgoff); + addr = base + len; + } + + /* make sure it can fit in the remaining address space */ + if (addr > len) { + vma = find_vma(mm, addr-len); + if (!vma || addr <= vma->vm_start) + /* remember the address as a hint for next time */ + return (mm->free_area_cache = addr-len); + } + + if (mm->mmap_base < len) + goto bottomup; + + addr = mm->mmap_base - len; + if (do_align) + addr = COLOUR_ALIGN_DOWN(addr, pgoff); + + do { + /* + * Lookup failure means no vma is above this address, + * else if new region fits below vma->vm_start, + * return with success: + */ + vma = find_vma(mm, addr); + if (!vma || addr+len <= vma->vm_start) + /* remember the address as a hint for next time */ + return (mm->free_area_cache = addr); + + /* remember the largest hole we saw so far */ + if (addr + mm->cached_hole_size < vma->vm_start) + mm->cached_hole_size = vma->vm_start - addr; + + /* try just below the current vma->vm_start */ + addr = vma->vm_start - len; + if (do_align) + addr = COLOUR_ALIGN_DOWN(addr, pgoff); + } while (len < vma->vm_start); + +bottomup: + /* + * A failed mmap() very likely causes application failure, + * so fall back to the bottom-up function here. This scenario + * can happen with large stack limits and large mmap() + * allocations. + */ + mm->cached_hole_size = ~0UL; + mm->free_area_cache = TASK_UNMAPPED_BASE; + addr = arch_get_unmapped_area(filp, addr0, len, pgoff, flags); + /* + * Restore the topdown base: + */ + mm->free_area_cache = mm->mmap_base; + mm->cached_hole_size = ~0UL; + + return addr; +} + +void arch_pick_mmap_layout(struct mm_struct *mm) +{ + unsigned long random_factor = 0UL; + + /* 8 bits of randomness in 20 address space bits */ + if ((current->flags & PF_RANDOMIZE) && + !(current->personality & ADDR_NO_RANDOMIZE)) + random_factor = (get_random_int() % (1 << 8)) << PAGE_SHIFT; + + if (mmap_is_legacy()) { + mm->mmap_base = TASK_UNMAPPED_BASE + random_factor; + mm->get_unmapped_area = arch_get_unmapped_area; + mm->unmap_area = arch_unmap_area; + } else { + mm->mmap_base = mmap_base(random_factor); + mm->get_unmapped_area = arch_get_unmapped_area_topdown; + mm->unmap_area = arch_unmap_area_topdown; + } +} /* * You really shouldn't be using read() or write() on /dev/mem. This diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 7efa2a721d5d..7e9b5bf910c1 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -161,6 +161,7 @@ __v7_ca5mp_setup: __v7_ca9mp_setup: mov r10, #(1 << 0) @ TLB ops broadcasting b 1f +__v7_ca7mp_setup: __v7_ca15mp_setup: mov r10, #0 1: @@ -240,11 +241,13 @@ __v7_setup: orreq r10, r10, #1 << 6 @ set bit #6 mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register #endif -#ifdef CONFIG_ARM_ERRATA_751472 - cmp r6, #0x30 @ present prior to r3p0 +#if defined(CONFIG_ARM_ERRATA_751472) && defined(CONFIG_SMP) + ALT_SMP(cmp r6, #0x30) @ present prior to r3p0 + ALT_UP_B(1f) mrclt p15, 0, r10, c15, c0, 1 @ read diagnostic register orrlt r10, r10, #1 << 11 @ set bit #11 mcrlt p15, 0, r10, c15, c0, 1 @ write diagnostic register +1: #endif 3: mov r10, #0 @@ -327,6 +330,16 @@ __v7_ca5mp_proc_info: .size __v7_ca5mp_proc_info, . - __v7_ca5mp_proc_info /* + * ARM Ltd. Cortex A7 processor. + */ + .type __v7_ca7mp_proc_info, #object +__v7_ca7mp_proc_info: + .long 0x410fc070 + .long 0xff0ffff0 + __v7_proc __v7_ca7mp_setup, hwcaps = HWCAP_IDIV + .size __v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info + + /* * ARM Ltd. Cortex A9 processor. */ .type __v7_ca9mp_proc_info, #object diff --git a/arch/arm/nwfpe/entry.S b/arch/arm/nwfpe/entry.S index cafa18354339..d18dde95b8aa 100644 --- a/arch/arm/nwfpe/entry.S +++ b/arch/arm/nwfpe/entry.S @@ -20,6 +20,8 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <asm/opcodes.h> + /* This is the kernel's entry point into the floating point emulator. It is called from the kernel with code similar to this: @@ -81,11 +83,11 @@ nwfpe_enter: mov r6, r0 @ save the opcode emulate: ldr r1, [sp, #S_PSR] @ fetch the PSR - bl checkCondition @ check the condition - cmp r0, #0 @ r0 = 0 ==> condition failed + bl arm_check_condition @ check the condition + cmp r0, #ARM_OPCODE_CONDTEST_PASS @ condition passed? @ if condition code failed to match, next insn - beq next @ get the next instruction; + bne next @ get the next instruction; mov r0, r6 @ prepare for EmulateAll() bl EmulateAll @ emulate the instruction diff --git a/arch/arm/nwfpe/fpopcode.c b/arch/arm/nwfpe/fpopcode.c index 922b81107585..ff9834673085 100644 --- a/arch/arm/nwfpe/fpopcode.c +++ b/arch/arm/nwfpe/fpopcode.c @@ -61,29 +61,3 @@ const float32 float32Constant[] = { 0x41200000 /* single 10.0 */ }; -/* condition code lookup table - index into the table is test code: EQ, NE, ... LT, GT, AL, NV - bit position in short is condition code: NZCV */ -static const unsigned short aCC[16] = { - 0xF0F0, // EQ == Z set - 0x0F0F, // NE - 0xCCCC, // CS == C set - 0x3333, // CC - 0xFF00, // MI == N set - 0x00FF, // PL - 0xAAAA, // VS == V set - 0x5555, // VC - 0x0C0C, // HI == C set && Z clear - 0xF3F3, // LS == C clear || Z set - 0xAA55, // GE == (N==V) - 0x55AA, // LT == (N!=V) - 0x0A05, // GT == (!Z && (N==V)) - 0xF5FA, // LE == (Z || (N!=V)) - 0xFFFF, // AL always - 0 // NV -}; - -unsigned int checkCondition(const unsigned int opcode, const unsigned int ccodes) -{ - return (aCC[opcode >> 28] >> (ccodes >> 28)) & 1; -} diff --git a/arch/arm/nwfpe/fpopcode.h b/arch/arm/nwfpe/fpopcode.h index 786e4c96156d..78f02dbfaa8f 100644 --- a/arch/arm/nwfpe/fpopcode.h +++ b/arch/arm/nwfpe/fpopcode.h @@ -475,9 +475,6 @@ static inline unsigned int getDestinationSize(const unsigned int opcode) return (nRc); } -extern unsigned int checkCondition(const unsigned int opcode, - const unsigned int ccodes); - extern const float64 float64Constant[]; extern const float32 float32Constant[]; diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c index c074e66ad224..4e0a371630b3 100644 --- a/arch/arm/oprofile/common.c +++ b/arch/arm/oprofile/common.c @@ -116,7 +116,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) return oprofile_perf_init(ops); } -void __exit oprofile_arch_exit(void) +void oprofile_arch_exit(void) { oprofile_perf_exit(); } diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c index 568dd0223d17..cbfbbe461788 100644 --- a/arch/arm/plat-iop/time.c +++ b/arch/arm/plat-iop/time.c @@ -18,7 +18,6 @@ #include <linux/time.h> #include <linux/init.h> #include <linux/timex.h> -#include <linux/sched.h> #include <linux/io.h> #include <linux/clocksource.h> #include <linux/clockchips.h> @@ -52,21 +51,12 @@ static struct clocksource iop_clocksource = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -static DEFINE_CLOCK_DATA(cd); - /* * IOP sched_clock() implementation via its clocksource. */ -unsigned long long notrace sched_clock(void) +static u32 notrace iop_read_sched_clock(void) { - u32 cyc = 0xffffffffu - read_tcr1(); - return cyc_to_sched_clock(&cd, cyc, (u32)~0); -} - -static void notrace iop_update_sched_clock(void) -{ - u32 cyc = 0xffffffffu - read_tcr1(); - update_sched_clock(&cd, cyc, (u32)~0); + return 0xffffffffu - read_tcr1(); } /* @@ -152,7 +142,7 @@ void __init iop_init_time(unsigned long tick_rate) { u32 timer_ctl; - init_sched_clock(&cd, iop_update_sched_clock, 32, tick_rate); + setup_sched_clock(iop_read_sched_clock, 32, tick_rate); ticks_per_jiffy = DIV_ROUND_CLOSEST(tick_rate, HZ); iop_tick_rate = tick_rate; diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index b3a1f2b3ada3..b30708e28c1d 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -20,6 +20,7 @@ config ARCH_IMX_V6_V7 bool "i.MX3, i.MX6" select AUTO_ZRELADDR if !ZBOOT_ROM select ARM_PATCH_PHYS_VIRT + select MIGHT_HAVE_CACHE_L2X0 help This enables support for systems based on the Freescale i.MX3 and i.MX6 family. diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c index adbff706ef6f..73db34bf588a 100644 --- a/arch/arm/plat-mxc/cpufreq.c +++ b/arch/arm/plat-mxc/cpufreq.c @@ -98,7 +98,7 @@ static int mxc_set_target(struct cpufreq_policy *policy, return ret; } -static int __init mxc_cpufreq_init(struct cpufreq_policy *policy) +static int mxc_cpufreq_init(struct cpufreq_policy *policy) { int ret; int i; diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index 88fd40452567..477971b00930 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -98,6 +98,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) case MACH_TYPE_PCM043: case MACH_TYPE_LILLY1131: case MACH_TYPE_VPR200: + case MACH_TYPE_EUKREA_CPUIMX35SD: uart_base = MX3X_UART1_BASE_ADDR; break; case MACH_TYPE_MAGX_ZN5: diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c index 845de59f07ed..e032717f7d02 100644 --- a/arch/arm/plat-mxc/pwm.c +++ b/arch/arm/plat-mxc/pwm.c @@ -77,6 +77,15 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) do_div(c, period_ns); duty_cycles = c; + /* + * according to imx pwm RM, the real period value should be + * PERIOD value in PWMPR plus 2. + */ + if (period_cycles > 2) + period_cycles -= 2; + else + period_cycles = 0; + writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR); writel(period_cycles, pwm->mmio_base + MX3_PWMPR); diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c index 4b0fe285e83c..1c96cdb4c35e 100644 --- a/arch/arm/plat-mxc/time.c +++ b/arch/arm/plat-mxc/time.c @@ -108,18 +108,9 @@ static void gpt_irq_acknowledge(void) static void __iomem *sched_clock_reg; -static DEFINE_CLOCK_DATA(cd); -unsigned long long notrace sched_clock(void) +static u32 notrace mxc_read_sched_clock(void) { - cycle_t cyc = sched_clock_reg ? __raw_readl(sched_clock_reg) : 0; - - return cyc_to_sched_clock(&cd, cyc, (u32)~0); -} - -static void notrace mxc_update_sched_clock(void) -{ - cycle_t cyc = sched_clock_reg ? __raw_readl(sched_clock_reg) : 0; - update_sched_clock(&cd, cyc, (u32)~0); + return sched_clock_reg ? __raw_readl(sched_clock_reg) : 0; } static int __init mxc_clocksource_init(struct clk *timer_clk) @@ -129,7 +120,7 @@ static int __init mxc_clocksource_init(struct clk *timer_clk) sched_clock_reg = reg; - init_sched_clock(&cd, mxc_update_sched_clock, 32, c); + setup_sched_clock(mxc_read_sched_clock, 32, c); return clocksource_mmio_init(reg, "mxc_timer1", c, 200, 32, clocksource_mmio_readl_up); } diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c index 30b6433d910d..ad1b45b605a4 100644 --- a/arch/arm/plat-nomadik/timer.c +++ b/arch/arm/plat-nomadik/timer.c @@ -17,7 +17,6 @@ #include <linux/clk.h> #include <linux/jiffies.h> #include <linux/err.h> -#include <linux/sched.h> #include <asm/mach/time.h> #include <asm/sched_clock.h> @@ -79,23 +78,12 @@ void __iomem *mtu_base; /* Assigned by machine code */ * local implementation which uses the clocksource to get some * better resolution when scheduling the kernel. */ -static DEFINE_CLOCK_DATA(cd); - -unsigned long long notrace sched_clock(void) +static u32 notrace nomadik_read_sched_clock(void) { - u32 cyc; - if (unlikely(!mtu_base)) return 0; - cyc = -readl(mtu_base + MTU_VAL(0)); - return cyc_to_sched_clock(&cd, cyc, (u32)~0); -} - -static void notrace nomadik_update_sched_clock(void) -{ - u32 cyc = -readl(mtu_base + MTU_VAL(0)); - update_sched_clock(&cd, cyc, (u32)~0); + return -readl(mtu_base + MTU_VAL(0)); } #endif @@ -231,9 +219,11 @@ void __init nmdk_timer_init(void) rate, 200, 32, clocksource_mmio_readl_down)) pr_err("timer: failed to initialize clock source %s\n", "mtu_0"); + #ifdef CONFIG_NOMADIK_MTU_SCHED_CLOCK - init_sched_clock(&cd, nomadik_update_sched_clock, 32, rate); + setup_sched_clock(nomadik_read_sched_clock, 32, rate); #endif + /* Timer 1 is used for events */ clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE); diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index a6cbb712da51..5f0f2292b7fb 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -17,7 +17,6 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> -#include <linux/sched.h> #include <linux/clocksource.h> #include <asm/sched_clock.h> @@ -37,41 +36,9 @@ static void __iomem *timer_32k_base; #define OMAP16XX_TIMER_32K_SYNCHRONIZED 0xfffbc410 -/* - * Returns current time from boot in nsecs. It's OK for this to wrap - * around for now, as it's just a relative time stamp. - */ -static DEFINE_CLOCK_DATA(cd); - -/* - * Constants generated by clocks_calc_mult_shift(m, s, 32768, NSEC_PER_SEC, 60). - * This gives a resolution of about 30us and a wrap period of about 36hrs. - */ -#define SC_MULT 4000000000u -#define SC_SHIFT 17 - -static inline unsigned long long notrace _omap_32k_sched_clock(void) -{ - u32 cyc = timer_32k_base ? __raw_readl(timer_32k_base) : 0; - return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT); -} - -#if defined(CONFIG_OMAP_32K_TIMER) && !defined(CONFIG_OMAP_MPU_TIMER) -unsigned long long notrace sched_clock(void) -{ - return _omap_32k_sched_clock(); -} -#else -unsigned long long notrace omap_32k_sched_clock(void) -{ - return _omap_32k_sched_clock(); -} -#endif - -static void notrace omap_update_sched_clock(void) +static u32 notrace omap_32k_read_sched_clock(void) { - u32 cyc = timer_32k_base ? __raw_readl(timer_32k_base) : 0; - update_sched_clock(&cd, cyc, (u32)~0); + return timer_32k_base ? __raw_readl(timer_32k_base) : 0; } /** @@ -147,8 +114,7 @@ int __init omap_init_clocksource_32k(void) clocksource_mmio_readl_up)) printk(err, "32k_counter"); - init_fixed_sched_clock(&cd, omap_update_sched_clock, 32, - 32768, SC_MULT, SC_SHIFT); + setup_sched_clock(omap_32k_read_sched_clock, 32, 32768); } return 0; } diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index 257f9770b2da..b4d7ec3fbfbe 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -31,7 +31,6 @@ #include <plat/omap_hwmod.h> extern int __init omap_init_clocksource_32k(void); -extern unsigned long long notrace omap_32k_sched_clock(void); extern void omap_reserve(void); extern int omap_dss_reset(struct omap_hwmod *); diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c index 41ab97ebe4cf..10d160888133 100644 --- a/arch/arm/plat-orion/gpio.c +++ b/arch/arm/plat-orion/gpio.c @@ -384,12 +384,16 @@ void __init orion_gpio_init(int gpio_base, int ngpio, struct orion_gpio_chip *ochip; struct irq_chip_generic *gc; struct irq_chip_type *ct; + char gc_label[16]; if (orion_gpio_chip_count == ARRAY_SIZE(orion_gpio_chips)) return; + snprintf(gc_label, sizeof(gc_label), "orion_gpio%d", + orion_gpio_chip_count); + ochip = orion_gpio_chips + orion_gpio_chip_count; - ochip->chip.label = "orion_gpio"; + ochip->chip.label = kstrdup(gc_label, GFP_KERNEL); ochip->chip.request = orion_gpio_request; ochip->chip.direction_input = orion_gpio_direction_input; ochip->chip.get = orion_gpio_get; diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c index 69a61367e4b8..1ed8d1397fcf 100644 --- a/arch/arm/plat-orion/time.c +++ b/arch/arm/plat-orion/time.c @@ -12,7 +12,6 @@ */ #include <linux/kernel.h> -#include <linux/sched.h> #include <linux/timer.h> #include <linux/clockchips.h> #include <linux/interrupt.h> @@ -60,24 +59,10 @@ static u32 ticks_per_jiffy; * Orion's sched_clock implementation. It has a resolution of * at least 7.5ns (133MHz TCLK). */ -static DEFINE_CLOCK_DATA(cd); -unsigned long long notrace sched_clock(void) +static u32 notrace orion_read_sched_clock(void) { - u32 cyc = ~readl(timer_base + TIMER0_VAL_OFF); - return cyc_to_sched_clock(&cd, cyc, (u32)~0); -} - - -static void notrace orion_update_sched_clock(void) -{ - u32 cyc = ~readl(timer_base + TIMER0_VAL_OFF); - update_sched_clock(&cd, cyc, (u32)~0); -} - -static void __init setup_sched_clock(unsigned long tclk) -{ - init_sched_clock(&cd, orion_update_sched_clock, 32, tclk); + return ~readl(timer_base + TIMER0_VAL_OFF); } /* @@ -217,7 +202,7 @@ orion_time_init(u32 _bridge_base, u32 _bridge_timer1_clr_mask, /* * Set scale and timer for sched_clock. */ - setup_sched_clock(tclk); + setup_sched_clock(orion_read_sched_clock, 32, tclk); /* * Setup free-running clocksource timer (interrupts diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c index 5a21b15b2a97..4eab2cca2d92 100644 --- a/arch/arm/plat-s3c24xx/s3c2443-clock.c +++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c @@ -297,13 +297,6 @@ static struct clksrc_clk clk_usb_bus_host = { static struct clksrc_clk clksrc_clks[] = { { - /* ART baud-rate clock sourced from esysclk via a divisor */ - .clk = { - .name = "uartclk", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 }, - }, { /* camera interface bus-clock, divided down from esysclk */ .clk = { .name = "camif-upll", /* same as 2440 name */ @@ -323,6 +316,15 @@ static struct clksrc_clk clksrc_clks[] = { }, }; +static struct clksrc_clk clk_esys_uart = { + /* ART baud-rate clock sourced from esysclk via a divisor */ + .clk = { + .name = "uartclk", + .parent = &clk_esysclk.clk, + }, + .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 }, +}; + static struct clk clk_i2s_ext = { .name = "i2s-ext", }; @@ -589,6 +591,12 @@ static struct clksrc_clk *clksrcs[] __initdata = { &clk_arm, }; +static struct clk_lookup s3c2443_clk_lookup[] = { + CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), + CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), + CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk), +}; + void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, unsigned int *divs, int nr_divs, int divmask) @@ -618,6 +626,7 @@ void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, /* See s3c2443/etc notes on disabling clocks at init time */ s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup)); s3c2443_common_setup_clocks(get_mpll); } diff --git a/arch/arm/plat-s5p/s5p-time.c b/arch/arm/plat-s5p/s5p-time.c index c833e7b57599..17c0a2c58dfd 100644 --- a/arch/arm/plat-s5p/s5p-time.c +++ b/arch/arm/plat-s5p/s5p-time.c @@ -10,7 +10,6 @@ * published by the Free Software Foundation. */ -#include <linux/sched.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/err.h> @@ -321,26 +320,14 @@ static void __iomem *s5p_timer_reg(void) * this wraps around for now, since it is just a relative time * stamp. (Inspired by U300 implementation.) */ -static DEFINE_CLOCK_DATA(cd); - -unsigned long long notrace sched_clock(void) +static u32 notrace s5p_read_sched_clock(void) { void __iomem *reg = s5p_timer_reg(); if (!reg) return 0; - return cyc_to_sched_clock(&cd, ~__raw_readl(reg), (u32)~0); -} - -static void notrace s5p_update_sched_clock(void) -{ - void __iomem *reg = s5p_timer_reg(); - - if (!reg) - return; - - update_sched_clock(&cd, ~__raw_readl(reg), (u32)~0); + return ~__raw_readl(reg); } static void __init s5p_clocksource_init(void) @@ -358,7 +345,7 @@ static void __init s5p_clocksource_init(void) s5p_time_setup(timer_source.source_id, TCNT_MAX); s5p_time_start(timer_source.source_id, PERIODIC); - init_sched_clock(&cd, s5p_update_sched_clock, 32, clock_rate); + setup_sched_clock(s5p_read_sched_clock, 32, clock_rate); if (clocksource_mmio_init(s5p_timer_reg(), "s5p_clocksource_timer", clock_rate, 250, 32, clocksource_mmio_readl_down)) diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c index 93a994a5dd8f..2cded872f22b 100644 --- a/arch/arm/plat-samsung/dma-ops.c +++ b/arch/arm/plat-samsung/dma-ops.c @@ -18,23 +18,24 @@ #include <mach/dma.h> -static inline bool pl330_filter(struct dma_chan *chan, void *param) -{ - struct dma_pl330_peri *peri = chan->private; - return peri->peri_id == (unsigned)param; -} - static unsigned samsung_dmadev_request(enum dma_ch dma_ch, struct samsung_dma_info *info) { struct dma_chan *chan; dma_cap_mask_t mask; struct dma_slave_config slave_config; + void *filter_param; dma_cap_zero(mask); dma_cap_set(info->cap, mask); - chan = dma_request_channel(mask, pl330_filter, (void *)dma_ch); + /* + * If a dma channel property of a device node from device tree is + * specified, use that as the fliter parameter. + */ + filter_param = (dma_ch == DMACH_DT_PROP) ? (void *)info->dt_dmach_prop : + (void *)dma_ch; + chan = dma_request_channel(mask, pl330_filter, filter_param); if (info->direction == DMA_FROM_DEVICE) { memset(&slave_config, 0, sizeof(struct dma_slave_config)); diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h index dac4760c0f0a..95509d8eb140 100644 --- a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h +++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h @@ -202,14 +202,6 @@ extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void); extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void); -extern void s3c2410_iotiming_debugfs(struct seq_file *seq, - struct s3c_cpufreq_config *cfg, - union s3c_iobank *iob); - -extern void s3c2412_iotiming_debugfs(struct seq_file *seq, - struct s3c_cpufreq_config *cfg, - union s3c_iobank *iob); - #ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS #define s3c_cpufreq_debugfs_call(x) x #else @@ -226,6 +218,10 @@ extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg); extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg); #ifdef CONFIG_S3C2410_IOTIMING +extern void s3c2410_iotiming_debugfs(struct seq_file *seq, + struct s3c_cpufreq_config *cfg, + union s3c_iobank *iob); + extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg, struct s3c_iotimings *iot); @@ -235,6 +231,7 @@ extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg, extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg, struct s3c_iotimings *iot); #else +#define s3c2410_iotiming_debugfs NULL #define s3c2410_iotiming_calc NULL #define s3c2410_iotiming_get NULL #define s3c2410_iotiming_set NULL @@ -242,8 +239,10 @@ extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg, /* S3C2412 compatible routines */ -extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg, - struct s3c_iotimings *timings); +#ifdef CONFIG_S3C2412_IOTIMING +extern void s3c2412_iotiming_debugfs(struct seq_file *seq, + struct s3c_cpufreq_config *cfg, + union s3c_iobank *iob); extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg, struct s3c_iotimings *timings); @@ -253,6 +252,12 @@ extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg, extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg, struct s3c_iotimings *iot); +#else +#define s3c2412_iotiming_debugfs NULL +#define s3c2412_iotiming_calc NULL +#define s3c2412_iotiming_get NULL +#define s3c2412_iotiming_set NULL +#endif /* CONFIG_S3C2412_IOTIMING */ #ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG #define s3c_freq_dbg(x...) printk(KERN_INFO x) diff --git a/arch/arm/plat-samsung/include/plat/dma-ops.h b/arch/arm/plat-samsung/include/plat/dma-ops.h index 4c1a363526cf..22eafc310bd7 100644 --- a/arch/arm/plat-samsung/include/plat/dma-ops.h +++ b/arch/arm/plat-samsung/include/plat/dma-ops.h @@ -31,6 +31,7 @@ struct samsung_dma_info { enum dma_slave_buswidth width; dma_addr_t fifo; struct s3c2410_dma_client *client; + struct property *dt_dmach_prop; }; struct samsung_dma_ops { diff --git a/arch/arm/plat-samsung/include/plat/dma-pl330.h b/arch/arm/plat-samsung/include/plat/dma-pl330.h index 2e55e5958674..c5eaad529de5 100644 --- a/arch/arm/plat-samsung/include/plat/dma-pl330.h +++ b/arch/arm/plat-samsung/include/plat/dma-pl330.h @@ -21,7 +21,8 @@ * use these just as IDs. */ enum dma_ch { - DMACH_UART0_RX, + DMACH_DT_PROP = -1, + DMACH_UART0_RX = 0, DMACH_UART0_TX, DMACH_UART1_RX, DMACH_UART1_TX, diff --git a/arch/arm/plat-samsung/include/plat/irqs.h b/arch/arm/plat-samsung/include/plat/irqs.h index 08d1a7ef97b7..df46b776976a 100644 --- a/arch/arm/plat-samsung/include/plat/irqs.h +++ b/arch/arm/plat-samsung/include/plat/irqs.h @@ -44,13 +44,14 @@ #define S5P_IRQ_VIC2(x) (S5P_VIC2_BASE + (x)) #define S5P_IRQ_VIC3(x) (S5P_VIC3_BASE + (x)) -#define S5P_TIMER_IRQ(x) (11 + (x)) +#define S5P_TIMER_IRQ(x) (IRQ_TIMER_BASE + (x)) #define IRQ_TIMER0 S5P_TIMER_IRQ(0) #define IRQ_TIMER1 S5P_TIMER_IRQ(1) #define IRQ_TIMER2 S5P_TIMER_IRQ(2) #define IRQ_TIMER3 S5P_TIMER_IRQ(3) #define IRQ_TIMER4 S5P_TIMER_IRQ(4) +#define IRQ_TIMER_COUNT (5) #define IRQ_EINT(x) ((x) < 16 ? ((x) + S5P_EINT_BASE1) \ : ((x) - 16 + S5P_EINT_BASE2)) diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h index 720734847027..29c26a818842 100644 --- a/arch/arm/plat-samsung/include/plat/regs-serial.h +++ b/arch/arm/plat-samsung/include/plat/regs-serial.h @@ -71,6 +71,7 @@ #define S3C2410_LCON_IRM (1<<6) #define S3C2440_UCON_CLKMASK (3<<10) +#define S3C2440_UCON_CLKSHIFT (10) #define S3C2440_UCON_PCLK (0<<10) #define S3C2440_UCON_UCLK (1<<10) #define S3C2440_UCON_PCLK2 (2<<10) @@ -78,6 +79,7 @@ #define S3C2443_UCON_EPLL (3<<10) #define S3C6400_UCON_CLKMASK (3<<10) +#define S3C6400_UCON_CLKSHIFT (10) #define S3C6400_UCON_PCLK (0<<10) #define S3C6400_UCON_PCLK2 (2<<10) #define S3C6400_UCON_UCLK0 (1<<10) @@ -90,11 +92,14 @@ #define S3C2440_UCON_DIVSHIFT (12) #define S3C2412_UCON_CLKMASK (3<<10) +#define S3C2412_UCON_CLKSHIFT (10) #define S3C2412_UCON_UCLK (1<<10) #define S3C2412_UCON_USYSCLK (3<<10) #define S3C2412_UCON_PCLK (0<<10) #define S3C2412_UCON_PCLK2 (2<<10) +#define S3C2410_UCON_CLKMASK (1 << 10) +#define S3C2410_UCON_CLKSHIFT (10) #define S3C2410_UCON_UCLK (1<<10) #define S3C2410_UCON_SBREAK (1<<4) @@ -193,6 +198,7 @@ /* Following are specific to S5PV210 */ #define S5PV210_UCON_CLKMASK (1<<10) +#define S5PV210_UCON_CLKSHIFT (10) #define S5PV210_UCON_PCLK (0<<10) #define S5PV210_UCON_UCLK (1<<10) @@ -221,29 +227,24 @@ #define S5PV210_UFSTAT_RXMASK (255<<0) #define S5PV210_UFSTAT_RXSHIFT (0) -#define NO_NEED_CHECK_CLKSRC 1 +#define S3C2410_UCON_CLKSEL0 (1 << 0) +#define S3C2410_UCON_CLKSEL1 (1 << 1) +#define S3C2410_UCON_CLKSEL2 (1 << 2) +#define S3C2410_UCON_CLKSEL3 (1 << 3) -#ifndef __ASSEMBLY__ +/* Default values for s5pv210 UCON and UFCON uart registers */ +#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) -/* struct s3c24xx_uart_clksrc - * - * this structure defines a named clock source that can be used for the - * uart, so that the best clock can be selected for the requested baud - * rate. - * - * min_baud and max_baud define the range of baud-rates this clock is - * acceptable for, if they are both zero, it is assumed any baud rate that - * can be generated from this clock will be used. - * - * divisor gives the divisor from the clock to the one seen by the uart -*/ +#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) -struct s3c24xx_uart_clksrc { - const char *name; - unsigned int divisor; - unsigned int min_baud; - unsigned int max_baud; -}; +#ifndef __ASSEMBLY__ /* configuration structure for per-machine configurations for the * serial port @@ -257,15 +258,13 @@ struct s3c2410_uartcfg { unsigned char unused; unsigned short flags; upf_t uart_flags; /* default uart flags */ + unsigned int clk_sel; unsigned int has_fracval; unsigned long ucon; /* value of ucon for port */ unsigned long ulcon; /* value of ulcon for port */ unsigned long ufcon; /* value of ufcon for port */ - - struct s3c24xx_uart_clksrc *clocks; - unsigned int clocks_size; }; /* s3c24xx_uart_devs diff --git a/arch/arm/plat-versatile/sched-clock.c b/arch/arm/plat-versatile/sched-clock.c index 3d6a4c292cab..b33b74c87232 100644 --- a/arch/arm/plat-versatile/sched-clock.c +++ b/arch/arm/plat-versatile/sched-clock.c @@ -18,41 +18,24 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include <linux/kernel.h> #include <linux/io.h> -#include <linux/sched.h> #include <asm/sched_clock.h> #include <plat/sched_clock.h> -static DEFINE_CLOCK_DATA(cd); static void __iomem *ctr; -/* - * Constants generated by clocks_calc_mult_shift(m, s, 24MHz, NSEC_PER_SEC, 60). - * This gives a resolution of about 41ns and a wrap period of about 178s. - */ -#define SC_MULT 2796202667u -#define SC_SHIFT 26 - -unsigned long long notrace sched_clock(void) +static u32 notrace versatile_read_sched_clock(void) { - if (ctr) { - u32 cyc = readl(ctr); - return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, - SC_MULT, SC_SHIFT); - } else - return 0; -} + if (ctr) + return readl(ctr); -static void notrace versatile_update_sched_clock(void) -{ - u32 cyc = readl(ctr); - update_sched_clock(&cd, cyc, (u32)~0); + return 0; } void __init versatile_sched_clock_init(void __iomem *reg, unsigned long rate) { ctr = reg; - init_fixed_sched_clock(&cd, versatile_update_sched_clock, - 32, rate, SC_MULT, SC_SHIFT); + setup_sched_clock(versatile_read_sched_clock, 32, rate); } diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index ccbe16f47227..f9c9f33f8cbe 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -16,7 +16,7 @@ # are merged into mainline or have been edited in the machine database # within the last 12 months. References to machine_is_NAME() do not count! # -# Last update: Sat May 7 08:48:24 2011 +# Last update: Tue Dec 6 11:07:38 2011 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -269,7 +269,7 @@ dns323 MACH_DNS323 DNS323 1542 omap3_beagle MACH_OMAP3_BEAGLE OMAP3_BEAGLE 1546 nokia_n810 MACH_NOKIA_N810 NOKIA_N810 1548 pcm038 MACH_PCM038 PCM038 1551 -ts_x09 MACH_TS209 TS209 1565 +ts209 MACH_TS209 TS209 1565 at91cap9adk MACH_AT91CAP9ADK AT91CAP9ADK 1566 mx31moboard MACH_MX31MOBOARD MX31MOBOARD 1574 vision_ep9307 MACH_VISION_EP9307 VISION_EP9307 1578 @@ -321,7 +321,6 @@ lb88rc8480 MACH_LB88RC8480 LB88RC8480 1769 mx25_3ds MACH_MX25_3DS MX25_3DS 1771 omap3530_lv_som MACH_OMAP3530_LV_SOM OMAP3530_LV_SOM 1773 davinci_da830_evm MACH_DAVINCI_DA830_EVM DAVINCI_DA830_EVM 1781 -at572d940hfek MACH_AT572D940HFEB AT572D940HFEB 1783 dove_db MACH_DOVE_DB DOVE_DB 1788 overo MACH_OVERO OVERO 1798 at2440evb MACH_AT2440EVB AT2440EVB 1799 @@ -459,7 +458,7 @@ guruplug MACH_GURUPLUG GURUPLUG 2659 spear310 MACH_SPEAR310 SPEAR310 2660 spear320 MACH_SPEAR320 SPEAR320 2661 aquila MACH_AQUILA AQUILA 2676 -sheeva_esata MACH_ESATA_SHEEVAPLUG ESATA_SHEEVAPLUG 2678 +esata_sheevaplug MACH_ESATA_SHEEVAPLUG ESATA_SHEEVAPLUG 2678 msm7x30_surf MACH_MSM7X30_SURF MSM7X30_SURF 2679 ea2478devkit MACH_EA2478DEVKIT EA2478DEVKIT 2683 terastation_wxl MACH_TERASTATION_WXL TERASTATION_WXL 2697 @@ -491,380 +490,53 @@ eukrea_cpuimx35sd MACH_EUKREA_CPUIMX35SD EUKREA_CPUIMX35SD 2821 eukrea_cpuimx51sd MACH_EUKREA_CPUIMX51SD EUKREA_CPUIMX51SD 2822 eukrea_cpuimx51 MACH_EUKREA_CPUIMX51 EUKREA_CPUIMX51 2823 smdkc210 MACH_SMDKC210 SMDKC210 2838 -omap3_braillo MACH_OMAP3_BRAILLO OMAP3_BRAILLO 2839 -spyplug MACH_SPYPLUG SPYPLUG 2840 -ginger MACH_GINGER GINGER 2841 -tny_t3530 MACH_TNY_T3530 TNY_T3530 2842 pca102 MACH_PCA102 PCA102 2843 -spade MACH_SPADE SPADE 2844 -mxc25_topaz MACH_MXC25_TOPAZ MXC25_TOPAZ 2845 t5325 MACH_T5325 T5325 2846 -gw2361 MACH_GW2361 GW2361 2847 -elog MACH_ELOG ELOG 2848 income MACH_INCOME INCOME 2849 -bcm589x MACH_BCM589X BCM589X 2850 -etna MACH_ETNA ETNA 2851 -hawks MACH_HAWKS HAWKS 2852 -meson MACH_MESON MESON 2853 -xsbase255 MACH_XSBASE255 XSBASE255 2854 -pvm2030 MACH_PVM2030 PVM2030 2855 -mioa502 MACH_MIOA502 MIOA502 2856 vvbox_sdorig2 MACH_VVBOX_SDORIG2 VVBOX_SDORIG2 2857 vvbox_sdlite2 MACH_VVBOX_SDLITE2 VVBOX_SDLITE2 2858 vvbox_sdpro4 MACH_VVBOX_SDPRO4 VVBOX_SDPRO4 2859 -htc_spv_m700 MACH_HTC_SPV_M700 HTC_SPV_M700 2860 mx257sx MACH_MX257SX MX257SX 2861 goni MACH_GONI GONI 2862 -msm8x55_svlte_ffa MACH_MSM8X55_SVLTE_FFA MSM8X55_SVLTE_FFA 2863 -msm8x55_svlte_surf MACH_MSM8X55_SVLTE_SURF MSM8X55_SVLTE_SURF 2864 -quickstep MACH_QUICKSTEP QUICKSTEP 2865 -dmw96 MACH_DMW96 DMW96 2866 -hammerhead MACH_HAMMERHEAD HAMMERHEAD 2867 -trident MACH_TRIDENT TRIDENT 2868 -lightning MACH_LIGHTNING LIGHTNING 2869 -iconnect MACH_ICONNECT ICONNECT 2870 -autobot MACH_AUTOBOT AUTOBOT 2871 -coconut MACH_COCONUT COCONUT 2872 -durian MACH_DURIAN DURIAN 2873 -cayenne MACH_CAYENNE CAYENNE 2874 -fuji MACH_FUJI FUJI 2875 -synology_6282 MACH_SYNOLOGY_6282 SYNOLOGY_6282 2876 -em1sy MACH_EM1SY EM1SY 2877 -m502 MACH_M502 M502 2878 -matrix518 MACH_MATRIX518 MATRIX518 2879 -tiny_gurnard MACH_TINY_GURNARD TINY_GURNARD 2880 -spear1310 MACH_SPEAR1310 SPEAR1310 2881 bv07 MACH_BV07 BV07 2882 -mxt_td61 MACH_MXT_TD61 MXT_TD61 2883 openrd_ultimate MACH_OPENRD_ULTIMATE OPENRD_ULTIMATE 2884 devixp MACH_DEVIXP DEVIXP 2885 miccpt MACH_MICCPT MICCPT 2886 mic256 MACH_MIC256 MIC256 2887 -as1167 MACH_AS1167 AS1167 2888 -omap3_ibiza MACH_OMAP3_IBIZA OMAP3_IBIZA 2889 u5500 MACH_U5500 U5500 2890 -davinci_picto MACH_DAVINCI_PICTO DAVINCI_PICTO 2891 -mecha MACH_MECHA MECHA 2892 -bubba3 MACH_BUBBA3 BUBBA3 2893 -pupitre MACH_PUPITRE PUPITRE 2894 -tegra_vogue MACH_TEGRA_VOGUE TEGRA_VOGUE 2896 -tegra_e1165 MACH_TEGRA_E1165 TEGRA_E1165 2897 -simplenet MACH_SIMPLENET SIMPLENET 2898 -ec4350tbm MACH_EC4350TBM EC4350TBM 2899 -pec_tc MACH_PEC_TC PEC_TC 2900 -pec_hc2 MACH_PEC_HC2 PEC_HC2 2901 -esl_mobilis_a MACH_ESL_MOBILIS_A ESL_MOBILIS_A 2902 -esl_mobilis_b MACH_ESL_MOBILIS_B ESL_MOBILIS_B 2903 -esl_wave_a MACH_ESL_WAVE_A ESL_WAVE_A 2904 -esl_wave_b MACH_ESL_WAVE_B ESL_WAVE_B 2905 -unisense_mmm MACH_UNISENSE_MMM UNISENSE_MMM 2906 -blueshark MACH_BLUESHARK BLUESHARK 2907 -e10 MACH_E10 E10 2908 -app3k_robin MACH_APP3K_ROBIN APP3K_ROBIN 2909 -pov15hd MACH_POV15HD POV15HD 2910 -stella MACH_STELLA STELLA 2911 linkstation_lschl MACH_LINKSTATION_LSCHL LINKSTATION_LSCHL 2913 -netwalker MACH_NETWALKER NETWALKER 2914 -acsx106 MACH_ACSX106 ACSX106 2915 -atlas5_c1 MACH_ATLAS5_C1 ATLAS5_C1 2916 -nsb3ast MACH_NSB3AST NSB3AST 2917 -gnet_slc MACH_GNET_SLC GNET_SLC 2918 -af4000 MACH_AF4000 AF4000 2919 -ark9431 MACH_ARK9431 ARK9431 2920 -fs_s5pc100 MACH_FS_S5PC100 FS_S5PC100 2921 -omap3505nova8 MACH_OMAP3505NOVA8 OMAP3505NOVA8 2922 -omap3621_edp1 MACH_OMAP3621_EDP1 OMAP3621_EDP1 2923 -oratisaes MACH_ORATISAES ORATISAES 2924 smdkv310 MACH_SMDKV310 SMDKV310 2925 -siemens_l0 MACH_SIEMENS_L0 SIEMENS_L0 2926 -ventana MACH_VENTANA VENTANA 2927 wm8505_7in_netbook MACH_WM8505_7IN_NETBOOK WM8505_7IN_NETBOOK 2928 -ec4350sdb MACH_EC4350SDB EC4350SDB 2929 -mimas MACH_MIMAS MIMAS 2930 -titan MACH_TITAN TITAN 2931 craneboard MACH_CRANEBOARD CRANEBOARD 2932 -es2440 MACH_ES2440 ES2440 2933 -najay_a9263 MACH_NAJAY_A9263 NAJAY_A9263 2934 -htctornado MACH_HTCTORNADO HTCTORNADO 2935 -dimm_mx257 MACH_DIMM_MX257 DIMM_MX257 2936 -jigen301 MACH_JIGEN JIGEN 2937 smdk6450 MACH_SMDK6450 SMDK6450 2938 -meno_qng MACH_MENO_QNG MENO_QNG 2939 -ns2416 MACH_NS2416 NS2416 2940 -rpc353 MACH_RPC353 RPC353 2941 -tq6410 MACH_TQ6410 TQ6410 2942 -sky6410 MACH_SKY6410 SKY6410 2943 -dynasty MACH_DYNASTY DYNASTY 2944 -vivo MACH_VIVO VIVO 2945 -bury_bl7582 MACH_BURY_BL7582 BURY_BL7582 2946 -bury_bps5270 MACH_BURY_BPS5270 BURY_BPS5270 2947 -basi MACH_BASI BASI 2948 -tn200 MACH_TN200 TN200 2949 -c2mmi MACH_C2MMI C2MMI 2950 -meson_6236m MACH_MESON_6236M MESON_6236M 2951 -meson_8626m MACH_MESON_8626M MESON_8626M 2952 -tube MACH_TUBE TUBE 2953 -messina MACH_MESSINA MESSINA 2954 -mx50_arm2 MACH_MX50_ARM2 MX50_ARM2 2955 -cetus9263 MACH_CETUS9263 CETUS9263 2956 brownstone MACH_BROWNSTONE BROWNSTONE 2957 -vmx25 MACH_VMX25 VMX25 2958 -vmx51 MACH_VMX51 VMX51 2959 -abacus MACH_ABACUS ABACUS 2960 -cm4745 MACH_CM4745 CM4745 2961 -oratislink MACH_ORATISLINK ORATISLINK 2962 -davinci_dm365_dvr MACH_DAVINCI_DM365_DVR DAVINCI_DM365_DVR 2963 -netviz MACH_NETVIZ NETVIZ 2964 flexibity MACH_FLEXIBITY FLEXIBITY 2965 -wlan_computer MACH_WLAN_COMPUTER WLAN_COMPUTER 2966 -lpc24xx MACH_LPC24XX LPC24XX 2967 -spica MACH_SPICA SPICA 2968 -gpsdisplay MACH_GPSDISPLAY GPSDISPLAY 2969 -bipnet MACH_BIPNET BIPNET 2970 -overo_ctu_inertial MACH_OVERO_CTU_INERTIAL OVERO_CTU_INERTIAL 2971 -davinci_dm355_mmm MACH_DAVINCI_DM355_MMM DAVINCI_DM355_MMM 2972 -pc9260_v2 MACH_PC9260_V2 PC9260_V2 2973 -ptx7545 MACH_PTX7545 PTX7545 2974 -tm_efdc MACH_TM_EFDC TM_EFDC 2975 -omap3_waldo1 MACH_OMAP3_WALDO1 OMAP3_WALDO1 2977 -flyer MACH_FLYER FLYER 2978 -tornado3240 MACH_TORNADO3240 TORNADO3240 2979 -soli_01 MACH_SOLI_01 SOLI_01 2980 -omapl138_europalc MACH_OMAPL138_EUROPALC OMAPL138_EUROPALC 2981 -helios_v1 MACH_HELIOS_V1 HELIOS_V1 2982 -netspace_lite_v2 MACH_NETSPACE_LITE_V2 NETSPACE_LITE_V2 2983 -ssc MACH_SSC SSC 2984 -premierwave_en MACH_PREMIERWAVE_EN PREMIERWAVE_EN 2985 -wasabi MACH_WASABI WASABI 2986 mx50_rdp MACH_MX50_RDP MX50_RDP 2988 universal_c210 MACH_UNIVERSAL_C210 UNIVERSAL_C210 2989 real6410 MACH_REAL6410 REAL6410 2990 -spx_sakura MACH_SPX_SAKURA SPX_SAKURA 2991 -ij3k_2440 MACH_IJ3K_2440 IJ3K_2440 2992 -omap3_bc10 MACH_OMAP3_BC10 OMAP3_BC10 2993 -thebe MACH_THEBE THEBE 2994 -rv082 MACH_RV082 RV082 2995 -armlguest MACH_ARMLGUEST ARMLGUEST 2996 -tjinc1000 MACH_TJINC1000 TJINC1000 2997 dockstar MACH_DOCKSTAR DOCKSTAR 2998 -ax8008 MACH_AX8008 AX8008 2999 -gnet_sgce MACH_GNET_SGCE GNET_SGCE 3000 -pxwnas_500_1000 MACH_PXWNAS_500_1000 PXWNAS_500_1000 3001 -ea20 MACH_EA20 EA20 3002 -awm2 MACH_AWM2 AWM2 3003 ti8148evm MACH_TI8148EVM TI8148EVM 3004 seaboard MACH_SEABOARD SEABOARD 3005 -linkstation_chlv2 MACH_LINKSTATION_CHLV2 LINKSTATION_CHLV2 3006 -tera_pro2_rack MACH_TERA_PRO2_RACK TERA_PRO2_RACK 3007 -rubys MACH_RUBYS RUBYS 3008 -aquarius MACH_AQUARIUS AQUARIUS 3009 mx53_ard MACH_MX53_ARD MX53_ARD 3010 mx53_smd MACH_MX53_SMD MX53_SMD 3011 -lswxl MACH_LSWXL LSWXL 3012 -dove_avng_v3 MACH_DOVE_AVNG_V3 DOVE_AVNG_V3 3013 -sdi_ess_9263 MACH_SDI_ESS_9263 SDI_ESS_9263 3014 -jocpu550 MACH_JOCPU550 JOCPU550 3015 msm8x60_rumi3 MACH_MSM8X60_RUMI3 MSM8X60_RUMI3 3016 msm8x60_ffa MACH_MSM8X60_FFA MSM8X60_FFA 3017 -yanomami MACH_YANOMAMI YANOMAMI 3018 -gta04 MACH_GTA04 GTA04 3019 cm_a510 MACH_CM_A510 CM_A510 3020 -omap3_rfs200 MACH_OMAP3_RFS200 OMAP3_RFS200 3021 -kx33xx MACH_KX33XX KX33XX 3022 -ptx7510 MACH_PTX7510 PTX7510 3023 -top9000 MACH_TOP9000 TOP9000 3024 -teenote MACH_TEENOTE TEENOTE 3025 -ts3 MACH_TS3 TS3 3026 -a0 MACH_A0 A0 3027 -fsm9xxx_surf MACH_FSM9XXX_SURF FSM9XXX_SURF 3028 -fsm9xxx_ffa MACH_FSM9XXX_FFA FSM9XXX_FFA 3029 -frrhwcdma60w MACH_FRRHWCDMA60W FRRHWCDMA60W 3030 -remus MACH_REMUS REMUS 3031 -at91cap7xdk MACH_AT91CAP7XDK AT91CAP7XDK 3032 -at91cap7stk MACH_AT91CAP7STK AT91CAP7STK 3033 -kt_sbc_sam9_1 MACH_KT_SBC_SAM9_1 KT_SBC_SAM9_1 3034 -armada_xp_db MACH_ARMADA_XP_DB ARMADA_XP_DB 3036 -spdm MACH_SPDM SPDM 3037 -gtib MACH_GTIB GTIB 3038 -dgm3240 MACH_DGM3240 DGM3240 3039 -htcmega MACH_HTCMEGA HTCMEGA 3041 -tricorder MACH_TRICORDER TRICORDER 3042 tx28 MACH_TX28 TX28 3043 -bstbrd MACH_BSTBRD BSTBRD 3044 -pwb3090 MACH_PWB3090 PWB3090 3045 -idea6410 MACH_IDEA6410 IDEA6410 3046 -qbc9263 MACH_QBC9263 QBC9263 3047 -borabora MACH_BORABORA BORABORA 3048 -valdez MACH_VALDEZ VALDEZ 3049 -ls9g20 MACH_LS9G20 LS9G20 3050 -mios_v1 MACH_MIOS_V1 MIOS_V1 3051 -s5pc110_crespo MACH_S5PC110_CRESPO S5PC110_CRESPO 3052 -controltek9g20 MACH_CONTROLTEK9G20 CONTROLTEK9G20 3053 -tin307 MACH_TIN307 TIN307 3054 -tin510 MACH_TIN510 TIN510 3055 -bluecheese MACH_BLUECHEESE BLUECHEESE 3057 -tem3x30 MACH_TEM3X30 TEM3X30 3058 -harvest_desoto MACH_HARVEST_DESOTO HARVEST_DESOTO 3059 -msm8x60_qrdc MACH_MSM8X60_QRDC MSM8X60_QRDC 3060 -spear900 MACH_SPEAR900 SPEAR900 3061 pcontrol_g20 MACH_PCONTROL_G20 PCONTROL_G20 3062 -rdstor MACH_RDSTOR RDSTOR 3063 -usdloader MACH_USDLOADER USDLOADER 3064 -tsoploader MACH_TSOPLOADER TSOPLOADER 3065 -kronos MACH_KRONOS KRONOS 3066 -ffcore MACH_FFCORE FFCORE 3067 -mone MACH_MONE MONE 3068 -unit2s MACH_UNIT2S UNIT2S 3069 -acer_a5 MACH_ACER_A5 ACER_A5 3070 -etherpro_isp MACH_ETHERPRO_ISP ETHERPRO_ISP 3071 -stretchs7000 MACH_STRETCHS7000 STRETCHS7000 3072 -p87_smartsim MACH_P87_SMARTSIM P87_SMARTSIM 3073 -tulip MACH_TULIP TULIP 3074 -sunflower MACH_SUNFLOWER SUNFLOWER 3075 -rib MACH_RIB RIB 3076 -clod MACH_CLOD CLOD 3077 -rump MACH_RUMP RUMP 3078 -tenderloin MACH_TENDERLOIN TENDERLOIN 3079 -shortloin MACH_SHORTLOIN SHORTLOIN 3080 -antares MACH_ANTARES ANTARES 3082 -wb40n MACH_WB40N WB40N 3083 -herring MACH_HERRING HERRING 3084 -naxy400 MACH_NAXY400 NAXY400 3085 -naxy1200 MACH_NAXY1200 NAXY1200 3086 vpr200 MACH_VPR200 VPR200 3087 -bug20 MACH_BUG20 BUG20 3088 -goflexnet MACH_GOFLEXNET GOFLEXNET 3089 torbreck MACH_TORBRECK TORBRECK 3090 -saarb_mg1 MACH_SAARB_MG1 SAARB_MG1 3091 -callisto MACH_CALLISTO CALLISTO 3092 -multhsu MACH_MULTHSU MULTHSU 3093 -saluda MACH_SALUDA SALUDA 3094 -pemp_omap3_apollo MACH_PEMP_OMAP3_APOLLO PEMP_OMAP3_APOLLO 3095 -vc0718 MACH_VC0718 VC0718 3096 -mvblx MACH_MVBLX MVBLX 3097 -inhand_apeiron MACH_INHAND_APEIRON INHAND_APEIRON 3098 -inhand_fury MACH_INHAND_FURY INHAND_FURY 3099 -inhand_siren MACH_INHAND_SIREN INHAND_SIREN 3100 -hdnvp MACH_HDNVP HDNVP 3101 -softwinner MACH_SOFTWINNER SOFTWINNER 3102 prima2_evb MACH_PRIMA2_EVB PRIMA2_EVB 3103 -nas6210 MACH_NAS6210 NAS6210 3104 -unisdev MACH_UNISDEV UNISDEV 3105 -sbca11 MACH_SBCA11 SBCA11 3106 -saga MACH_SAGA SAGA 3107 -ns_k330 MACH_NS_K330 NS_K330 3108 -tanna MACH_TANNA TANNA 3109 -imate8502 MACH_IMATE8502 IMATE8502 3110 -aspen MACH_ASPEN ASPEN 3111 -daintree_cwac MACH_DAINTREE_CWAC DAINTREE_CWAC 3112 -zmx25 MACH_ZMX25 ZMX25 3113 -maple1 MACH_MAPLE1 MAPLE1 3114 -qsd8x72_surf MACH_QSD8X72_SURF QSD8X72_SURF 3115 -qsd8x72_ffa MACH_QSD8X72_FFA QSD8X72_FFA 3116 -abilene MACH_ABILENE ABILENE 3117 -eigen_ttr MACH_EIGEN_TTR EIGEN_TTR 3118 -iomega_ix2_200 MACH_IOMEGA_IX2_200 IOMEGA_IX2_200 3119 -coretec_vcx7400 MACH_CORETEC_VCX7400 CORETEC_VCX7400 3120 -santiago MACH_SANTIAGO SANTIAGO 3121 -mx257sol MACH_MX257SOL MX257SOL 3122 -strasbourg MACH_STRASBOURG STRASBOURG 3123 -msm8x60_fluid MACH_MSM8X60_FLUID MSM8X60_FLUID 3124 -smartqv5 MACH_SMARTQV5 SMARTQV5 3125 -smartqv3 MACH_SMARTQV3 SMARTQV3 3126 -smartqv7 MACH_SMARTQV7 SMARTQV7 3127 paz00 MACH_PAZ00 PAZ00 3128 acmenetusfoxg20 MACH_ACMENETUSFOXG20 ACMENETUSFOXG20 3129 -fwbd_0404 MACH_FWBD_0404 FWBD_0404 3131 -hdgu MACH_HDGU HDGU 3132 -pyramid MACH_PYRAMID PYRAMID 3133 -epiphan MACH_EPIPHAN EPIPHAN 3134 -omap_bender MACH_OMAP_BENDER OMAP_BENDER 3135 -gurnard MACH_GURNARD GURNARD 3136 -gtl_it5100 MACH_GTL_IT5100 GTL_IT5100 3137 -bcm2708 MACH_BCM2708 BCM2708 3138 -mx51_ggc MACH_MX51_GGC MX51_GGC 3139 -sharespace MACH_SHARESPACE SHARESPACE 3140 -haba_knx_explorer MACH_HABA_KNX_EXPLORER HABA_KNX_EXPLORER 3141 -simtec_kirkmod MACH_SIMTEC_KIRKMOD SIMTEC_KIRKMOD 3142 -crux MACH_CRUX CRUX 3143 -mx51_bravo MACH_MX51_BRAVO MX51_BRAVO 3144 -charon MACH_CHARON CHARON 3145 -picocom3 MACH_PICOCOM3 PICOCOM3 3146 -picocom4 MACH_PICOCOM4 PICOCOM4 3147 -serrano MACH_SERRANO SERRANO 3148 -doubleshot MACH_DOUBLESHOT DOUBLESHOT 3149 -evsy MACH_EVSY EVSY 3150 -huashan MACH_HUASHAN HUASHAN 3151 -lausanne MACH_LAUSANNE LAUSANNE 3152 -emerald MACH_EMERALD EMERALD 3153 -tqma35 MACH_TQMA35 TQMA35 3154 -marvel MACH_MARVEL MARVEL 3155 -manuae MACH_MANUAE MANUAE 3156 -chacha MACH_CHACHA CHACHA 3157 -lemon MACH_LEMON LEMON 3158 -csc MACH_CSC CSC 3159 -gira_knxip_router MACH_GIRA_KNXIP_ROUTER GIRA_KNXIP_ROUTER 3160 -t20 MACH_T20 T20 3161 -hdmini MACH_HDMINI HDMINI 3162 -sciphone_g2 MACH_SCIPHONE_G2 SCIPHONE_G2 3163 -express MACH_EXPRESS EXPRESS 3164 -express_kt MACH_EXPRESS_KT EXPRESS_KT 3165 -maximasp MACH_MAXIMASP MAXIMASP 3166 -nitrogen_imx51 MACH_NITROGEN_IMX51 NITROGEN_IMX51 3167 -nitrogen_imx53 MACH_NITROGEN_IMX53 NITROGEN_IMX53 3168 -sunfire MACH_SUNFIRE SUNFIRE 3169 -arowana MACH_AROWANA AROWANA 3170 -tegra_daytona MACH_TEGRA_DAYTONA TEGRA_DAYTONA 3171 -tegra_swordfish MACH_TEGRA_SWORDFISH TEGRA_SWORDFISH 3172 -edison MACH_EDISON EDISON 3173 -svp8500v1 MACH_SVP8500V1 SVP8500V1 3174 -svp8500v2 MACH_SVP8500V2 SVP8500V2 3175 -svp5500 MACH_SVP5500 SVP5500 3176 -b5500 MACH_B5500 B5500 3177 -s5500 MACH_S5500 S5500 3178 -icon MACH_ICON ICON 3179 -elephant MACH_ELEPHANT ELEPHANT 3180 -shooter MACH_SHOOTER SHOOTER 3182 -spade_lte MACH_SPADE_LTE SPADE_LTE 3183 -philhwani MACH_PHILHWANI PHILHWANI 3184 -gsncomm MACH_GSNCOMM GSNCOMM 3185 -strasbourg_a2 MACH_STRASBOURG_A2 STRASBOURG_A2 3186 -mmm MACH_MMM MMM 3187 -davinci_dm365_bv MACH_DAVINCI_DM365_BV DAVINCI_DM365_BV 3188 ag5evm MACH_AG5EVM AG5EVM 3189 -sc575plc MACH_SC575PLC SC575PLC 3190 -sc575hmi MACH_SC575IPC SC575IPC 3191 -omap3_tdm3730 MACH_OMAP3_TDM3730 OMAP3_TDM3730 3192 -top9000_eval MACH_TOP9000_EVAL TOP9000_EVAL 3194 -top9000_su MACH_TOP9000_SU TOP9000_SU 3195 -utm300 MACH_UTM300 UTM300 3196 tsunagi MACH_TSUNAGI TSUNAGI 3197 -ts75xx MACH_TS75XX TS75XX 3198 -ts47xx MACH_TS47XX TS47XX 3200 -da850_k5 MACH_DA850_K5 DA850_K5 3201 -ax502 MACH_AX502 AX502 3202 -igep0032 MACH_IGEP0032 IGEP0032 3203 -antero MACH_ANTERO ANTERO 3204 -synergy MACH_SYNERGY SYNERGY 3205 ics_if_voip MACH_ICS_IF_VOIP ICS_IF_VOIP 3206 wlf_cragg_6410 MACH_WLF_CRAGG_6410 WLF_CRAGG_6410 3207 -punica MACH_PUNICA PUNICA 3208 trimslice MACH_TRIMSLICE TRIMSLICE 3209 -mx27_wmultra MACH_MX27_WMULTRA MX27_WMULTRA 3210 mackerel MACH_MACKEREL MACKEREL 3211 -fa9x27 MACH_FA9X27 FA9X27 3213 -ns2816tb MACH_NS2816TB NS2816TB 3214 -ns2816_ntpad MACH_NS2816_NTPAD NS2816_NTPAD 3215 -ns2816_ntnb MACH_NS2816_NTNB NS2816_NTNB 3216 kaen MACH_KAEN KAEN 3217 -nv1000 MACH_NV1000 NV1000 3218 -nuc950ts MACH_NUC950TS NUC950TS 3219 nokia_rm680 MACH_NOKIA_RM680 NOKIA_RM680 3220 -ast2200 MACH_AST2200 AST2200 3221 -lead MACH_LEAD LEAD 3222 -unino1 MACH_UNINO1 UNINO1 3223 -greeco MACH_GREECO GREECO 3224 -verdi MACH_VERDI VERDI 3225 dm6446_adbox MACH_DM6446_ADBOX DM6446_ADBOX 3226 quad_salsa MACH_QUAD_SALSA QUAD_SALSA 3227 abb_gma_1_1 MACH_ABB_GMA_1_1 ABB_GMA_1_1 3228 @@ -949,13 +621,11 @@ koi MACH_KOI KOI 3312 ts4800 MACH_TS4800 TS4800 3313 tqma9263 MACH_TQMA9263 TQMA9263 3314 holiday MACH_HOLIDAY HOLIDAY 3315 -dma_6410 MACH_DMA6410 DMA6410 3316 pcats_overlay MACH_PCATS_OVERLAY PCATS_OVERLAY 3317 hwgw6410 MACH_HWGW6410 HWGW6410 3318 shenzhou MACH_SHENZHOU SHENZHOU 3319 cwme9210 MACH_CWME9210 CWME9210 3320 cwme9210js MACH_CWME9210JS CWME9210JS 3321 -pgs_v1 MACH_PGS_SITARA PGS_SITARA 3322 colibri_tegra2 MACH_COLIBRI_TEGRA2 COLIBRI_TEGRA2 3323 w21 MACH_W21 W21 3324 polysat1 MACH_POLYSAT1 POLYSAT1 3325 @@ -1021,13 +691,11 @@ viprinet MACH_VIPRINET VIPRINET 3385 bockw MACH_BOCKW BOCKW 3386 eva2000 MACH_EVA2000 EVA2000 3387 steelyard MACH_STEELYARD STEELYARD 3388 -sdh001 MACH_MACH_SDH001 MACH_SDH001 3390 nsslsboard MACH_NSSLSBOARD NSSLSBOARD 3392 geneva_b5 MACH_GENEVA_B5 GENEVA_B5 3393 spear1340 MACH_SPEAR1340 SPEAR1340 3394 rexmas MACH_REXMAS REXMAS 3395 msm8960_cdp MACH_MSM8960_CDP MSM8960_CDP 3396 -msm8960_mdp MACH_MSM8960_MDP MSM8960_MDP 3397 msm8960_fluid MACH_MSM8960_FLUID MSM8960_FLUID 3398 msm8960_apq MACH_MSM8960_APQ MSM8960_APQ 3399 helios_v2 MACH_HELIOS_V2 HELIOS_V2 3400 @@ -1123,6 +791,381 @@ blissc MACH_BLISSC BLISSC 3491 thales_adc MACH_THALES_ADC THALES_ADC 3492 ubisys_p9d_evp MACH_UBISYS_P9D_EVP UBISYS_P9D_EVP 3493 atdgp318 MACH_ATDGP318 ATDGP318 3494 +dma210u MACH_DMA210U DMA210U 3495 +em_t3 MACH_EM_T3 EM_T3 3496 +htx3250 MACH_HTX3250 HTX3250 3497 +g50 MACH_G50 G50 3498 +eco5 MACH_ECO5 ECO5 3499 +wintergrasp MACH_WINTERGRASP WINTERGRASP 3500 +puro MACH_PURO PURO 3501 +shooter_k MACH_SHOOTER_K SHOOTER_K 3502 +nspire MACH_NSPIRE NSPIRE 3503 +mickxx MACH_MICKXX MICKXX 3504 +lxmb MACH_LXMB LXMB 3505 +adam MACH_ADAM ADAM 3507 +b1004 MACH_B1004 B1004 3508 +oboea MACH_OBOEA OBOEA 3509 +a1015 MACH_A1015 A1015 3510 +robin_vbdt30 MACH_ROBIN_VBDT30 ROBIN_VBDT30 3511 +tegra_enterprise MACH_TEGRA_ENTERPRISE TEGRA_ENTERPRISE 3512 +rfl108200_mk10 MACH_RFL108200_MK10 RFL108200_MK10 3513 +rfl108300_mk16 MACH_RFL108300_MK16 RFL108300_MK16 3514 +rover_v7 MACH_ROVER_V7 ROVER_V7 3515 +miphone MACH_MIPHONE MIPHONE 3516 +femtobts MACH_FEMTOBTS FEMTOBTS 3517 +monopoli MACH_MONOPOLI MONOPOLI 3518 +boss MACH_BOSS BOSS 3519 +davinci_dm368_vtam MACH_DAVINCI_DM368_VTAM DAVINCI_DM368_VTAM 3520 +clcon MACH_CLCON CLCON 3521 +nokia_rm696 MACH_NOKIA_RM696 NOKIA_RM696 3522 +tahiti MACH_TAHITI TAHITI 3523 +fighter MACH_FIGHTER FIGHTER 3524 +sgh_i710 MACH_SGH_I710 SGH_I710 3525 +integreproscb MACH_INTEGREPROSCB INTEGREPROSCB 3526 +monza MACH_MONZA MONZA 3527 +calimain MACH_CALIMAIN CALIMAIN 3528 +mx6q_sabreauto MACH_MX6Q_SABREAUTO MX6Q_SABREAUTO 3529 +gma01x MACH_GMA01X GMA01X 3530 +sbc51 MACH_SBC51 SBC51 3531 +fit MACH_FIT FIT 3532 +steelhead MACH_STEELHEAD STEELHEAD 3533 +panther MACH_PANTHER PANTHER 3534 +msm8960_liquid MACH_MSM8960_LIQUID MSM8960_LIQUID 3535 +lexikonct MACH_LEXIKONCT LEXIKONCT 3536 +ns2816_stb MACH_NS2816_STB NS2816_STB 3537 +sei_mm2_lpc3250 MACH_SEI_MM2_LPC3250 SEI_MM2_LPC3250 3538 +cmimx53 MACH_CMIMX53 CMIMX53 3539 +sandwich MACH_SANDWICH SANDWICH 3540 +chief MACH_CHIEF CHIEF 3541 +pogo_e02 MACH_POGO_E02 POGO_E02 3542 +mikrap_x168 MACH_MIKRAP_X168 MIKRAP_X168 3543 +htcmozart MACH_HTCMOZART HTCMOZART 3544 +htcgold MACH_HTCGOLD HTCGOLD 3545 +mt72xx MACH_MT72XX MT72XX 3546 +mx51_ivy MACH_MX51_IVY MX51_IVY 3547 +mx51_lvd MACH_MX51_LVD MX51_LVD 3548 +omap3_wiser2 MACH_OMAP3_WISER2 OMAP3_WISER2 3549 +dreamplug MACH_DREAMPLUG DREAMPLUG 3550 +cobas_c_111 MACH_COBAS_C_111 COBAS_C_111 3551 +cobas_u_411 MACH_COBAS_U_411 COBAS_U_411 3552 +hssd MACH_HSSD HSSD 3553 +iom35x MACH_IOM35X IOM35X 3554 +psom_omap MACH_PSOM_OMAP PSOM_OMAP 3555 +iphone_2g MACH_IPHONE_2G IPHONE_2G 3556 +iphone_3g MACH_IPHONE_3G IPHONE_3G 3557 +ipod_touch_1g MACH_IPOD_TOUCH_1G IPOD_TOUCH_1G 3558 +pharos_tpc MACH_PHAROS_TPC PHAROS_TPC 3559 +mx53_hydra MACH_MX53_HYDRA MX53_HYDRA 3560 +ns2816_dev_board MACH_NS2816_DEV_BOARD NS2816_DEV_BOARD 3561 +iphone_3gs MACH_IPHONE_3GS IPHONE_3GS 3562 +iphone_4 MACH_IPHONE_4 IPHONE_4 3563 +ipod_touch_4g MACH_IPOD_TOUCH_4G IPOD_TOUCH_4G 3564 +dragon_e1100 MACH_DRAGON_E1100 DRAGON_E1100 3565 +topside MACH_TOPSIDE TOPSIDE 3566 +irisiii MACH_IRISIII IRISIII 3567 +deto_macarm9 MACH_DETO_MACARM9 DETO_MACARM9 3568 +eti_d1 MACH_ETI_D1 ETI_D1 3569 +som3530sdk MACH_SOM3530SDK SOM3530SDK 3570 +oc_engine MACH_OC_ENGINE OC_ENGINE 3571 +apq8064_sim MACH_APQ8064_SIM APQ8064_SIM 3572 +alps MACH_ALPS ALPS 3575 +tny_t3730 MACH_TNY_T3730 TNY_T3730 3576 +geryon_nfe MACH_GERYON_NFE GERYON_NFE 3577 +ns2816_ref_board MACH_NS2816_REF_BOARD NS2816_REF_BOARD 3578 +silverstone MACH_SILVERSTONE SILVERSTONE 3579 +mtt2440 MACH_MTT2440 MTT2440 3580 +ynicdb MACH_YNICDB YNICDB 3581 +bct MACH_BCT BCT 3582 +tuscan MACH_TUSCAN TUSCAN 3583 +xbt_sam9g45 MACH_XBT_SAM9G45 XBT_SAM9G45 3584 +enbw_cmc MACH_ENBW_CMC ENBW_CMC 3585 +ch104mx257 MACH_CH104MX257 CH104MX257 3587 +openpri MACH_OPENPRI OPENPRI 3588 +am335xevm MACH_AM335XEVM AM335XEVM 3589 +picodmb MACH_PICODMB PICODMB 3590 +waluigi MACH_WALUIGI WALUIGI 3591 +punicag7 MACH_PUNICAG7 PUNICAG7 3592 +ipad_1g MACH_IPAD_1G IPAD_1G 3593 +appletv_2g MACH_APPLETV_2G APPLETV_2G 3594 +mach_ecog45 MACH_MACH_ECOG45 MACH_ECOG45 3595 +ait_cam_enc_4xx MACH_AIT_CAM_ENC_4XX AIT_CAM_ENC_4XX 3596 +runnymede MACH_RUNNYMEDE RUNNYMEDE 3597 +play MACH_PLAY PLAY 3598 +hw90260 MACH_HW90260 HW90260 3599 +tagh MACH_TAGH TAGH 3600 +filbert MACH_FILBERT FILBERT 3601 +getinge_netcomv3 MACH_GETINGE_NETCOMV3 GETINGE_NETCOMV3 3602 +cw20 MACH_CW20 CW20 3603 +cinema MACH_CINEMA CINEMA 3604 +cinema_tea MACH_CINEMA_TEA CINEMA_TEA 3605 +cinema_coffee MACH_CINEMA_COFFEE CINEMA_COFFEE 3606 +cinema_juice MACH_CINEMA_JUICE CINEMA_JUICE 3607 +mx53_mirage2 MACH_MX53_MIRAGE2 MX53_MIRAGE2 3609 +mx53_efikasb MACH_MX53_EFIKASB MX53_EFIKASB 3610 +stm_b2000 MACH_STM_B2000 STM_B2000 3612 m28evk MACH_M28EVK M28EVK 3613 +pda MACH_PDA PDA 3614 +meraki_mr58 MACH_MERAKI_MR58 MERAKI_MR58 3615 +kota2 MACH_KOTA2 KOTA2 3616 +letcool MACH_LETCOOL LETCOOL 3617 +mx27iat MACH_MX27IAT MX27IAT 3618 +apollo_td MACH_APOLLO_TD APOLLO_TD 3619 +arena MACH_ARENA ARENA 3620 +gsngateway MACH_GSNGATEWAY GSNGATEWAY 3621 +lf2000 MACH_LF2000 LF2000 3622 +bonito MACH_BONITO BONITO 3623 +asymptote MACH_ASYMPTOTE ASYMPTOTE 3624 +bst2brd MACH_BST2BRD BST2BRD 3625 +tx335s MACH_TX335S TX335S 3626 +pelco_tesla MACH_PELCO_TESLA PELCO_TESLA 3627 +rrhtestplat MACH_RRHTESTPLAT RRHTESTPLAT 3628 +vidtonic_pro MACH_VIDTONIC_PRO VIDTONIC_PRO 3629 +pl_apollo MACH_PL_APOLLO PL_APOLLO 3630 +pl_phoenix MACH_PL_PHOENIX PL_PHOENIX 3631 +m28cu3 MACH_M28CU3 M28CU3 3632 +vvbox_hd MACH_VVBOX_HD VVBOX_HD 3633 +coreware_sam9260_ MACH_COREWARE_SAM9260_ COREWARE_SAM9260_ 3634 +marmaduke MACH_MARMADUKE MARMADUKE 3635 +amg_xlcore_camera MACH_AMG_XLCORE_CAMERA AMG_XLCORE_CAMERA 3636 +omap3_egf MACH_OMAP3_EGF OMAP3_EGF 3637 smdk4212 MACH_SMDK4212 SMDK4212 3638 +dnp9200 MACH_DNP9200 DNP9200 3639 +tf101 MACH_TF101 TF101 3640 +omap3silvio MACH_OMAP3SILVIO OMAP3SILVIO 3641 +picasso2 MACH_PICASSO2 PICASSO2 3642 +vangogh2 MACH_VANGOGH2 VANGOGH2 3643 +olpc_xo_1_75 MACH_OLPC_XO_1_75 OLPC_XO_1_75 3644 +gx400 MACH_GX400 GX400 3645 +gs300 MACH_GS300 GS300 3646 +acer_a9 MACH_ACER_A9 ACER_A9 3647 +vivow_evm MACH_VIVOW_EVM VIVOW_EVM 3648 +veloce_cxq MACH_VELOCE_CXQ VELOCE_CXQ 3649 +veloce_cxm MACH_VELOCE_CXM VELOCE_CXM 3650 +p1852 MACH_P1852 P1852 3651 +naxy100 MACH_NAXY100 NAXY100 3652 +taishan MACH_TAISHAN TAISHAN 3653 +touchlink MACH_TOUCHLINK TOUCHLINK 3654 +stm32f103ze MACH_STM32F103ZE STM32F103ZE 3655 +mcx MACH_MCX MCX 3656 +stm_nmhdk_fli7610 MACH_STM_NMHDK_FLI7610 STM_NMHDK_FLI7610 3657 +top28x MACH_TOP28X TOP28X 3658 +okl4vp_microvisor MACH_OKL4VP_MICROVISOR OKL4VP_MICROVISOR 3659 +pop MACH_POP POP 3660 +layer MACH_LAYER LAYER 3661 +trondheim MACH_TRONDHEIM TRONDHEIM 3662 +eva MACH_EVA EVA 3663 +trust_taurus MACH_TRUST_TAURUS TRUST_TAURUS 3664 +ns2816_huashan MACH_NS2816_HUASHAN NS2816_HUASHAN 3665 +ns2816_yangcheng MACH_NS2816_YANGCHENG NS2816_YANGCHENG 3666 +p852 MACH_P852 P852 3667 +flea3 MACH_FLEA3 FLEA3 3668 +bowfin MACH_BOWFIN BOWFIN 3669 +mv88de3100 MACH_MV88DE3100 MV88DE3100 3670 +pia_am35x MACH_PIA_AM35X PIA_AM35X 3671 +cedar MACH_CEDAR CEDAR 3672 +picasso_e MACH_PICASSO_E PICASSO_E 3673 +samsung_e60 MACH_SAMSUNG_E60 SAMSUNG_E60 3674 +sdvr_mini MACH_SDVR_MINI SDVR_MINI 3676 +omap3_ij3k MACH_OMAP3_IJ3K OMAP3_IJ3K 3677 +modasmc1 MACH_MODASMC1 MODASMC1 3678 +apq8064_rumi3 MACH_APQ8064_RUMI3 APQ8064_RUMI3 3679 +matrix506 MACH_MATRIX506 MATRIX506 3680 +msm9615_mtp MACH_MSM9615_MTP MSM9615_MTP 3681 +dm36x_spawndc MACH_DM36X_SPAWNDC DM36X_SPAWNDC 3682 +sff792 MACH_SFF792 SFF792 3683 +am335xiaevm MACH_AM335XIAEVM AM335XIAEVM 3684 +g3c2440 MACH_G3C2440 G3C2440 3685 +tion270 MACH_TION270 TION270 3686 +w22q7arm02 MACH_W22Q7ARM02 W22Q7ARM02 3687 +omap_cat MACH_OMAP_CAT OMAP_CAT 3688 +at91sam9n12ek MACH_AT91SAM9N12EK AT91SAM9N12EK 3689 +morrison MACH_MORRISON MORRISON 3690 +svdu MACH_SVDU SVDU 3691 +lpp01 MACH_LPP01 LPP01 3692 +ubc283 MACH_UBC283 UBC283 3693 +zeppelin MACH_ZEPPELIN ZEPPELIN 3694 +motus MACH_MOTUS MOTUS 3695 +neomainboard MACH_NEOMAINBOARD NEOMAINBOARD 3696 +devkit3250 MACH_DEVKIT3250 DEVKIT3250 3697 +devkit7000 MACH_DEVKIT7000 DEVKIT7000 3698 +fmc_uic MACH_FMC_UIC FMC_UIC 3699 +fmc_dcm MACH_FMC_DCM FMC_DCM 3700 +batwm MACH_BATWM BATWM 3701 +atlas6cb MACH_ATLAS6CB ATLAS6CB 3702 +blue MACH_BLUE BLUE 3705 +colorado MACH_COLORADO COLORADO 3706 +popc MACH_POPC POPC 3707 +promwad_jade MACH_PROMWAD_JADE PROMWAD_JADE 3708 +amp MACH_AMP AMP 3709 +gnet_amp MACH_GNET_AMP GNET_AMP 3710 +toques MACH_TOQUES TOQUES 3711 +dct_storm MACH_DCT_STORM DCT_STORM 3713 +owl MACH_OWL OWL 3715 +cogent_csb1741 MACH_COGENT_CSB1741 COGENT_CSB1741 3716 +adillustra610 MACH_ADILLUSTRA610 ADILLUSTRA610 3718 +ecafe_na04 MACH_ECAFE_NA04 ECAFE_NA04 3719 +popct MACH_POPCT POPCT 3720 +omap3_helena MACH_OMAP3_HELENA OMAP3_HELENA 3721 +ach MACH_ACH ACH 3722 +module_dtb MACH_MODULE_DTB MODULE_DTB 3723 +oslo_elisabeth MACH_OSLO_ELISABETH OSLO_ELISABETH 3725 +tt01 MACH_TT01 TT01 3726 +msm8930_cdp MACH_MSM8930_CDP MSM8930_CDP 3727 +msm8930_mtp MACH_MSM8930_MTP MSM8930_MTP 3728 +msm8930_fluid MACH_MSM8930_FLUID MSM8930_FLUID 3729 +ltu11 MACH_LTU11 LTU11 3730 +am1808_spawnco MACH_AM1808_SPAWNCO AM1808_SPAWNCO 3731 +flx6410 MACH_FLX6410 FLX6410 3732 +mx6q_qsb MACH_MX6Q_QSB MX6Q_QSB 3733 +mx53_plt424 MACH_MX53_PLT424 MX53_PLT424 3734 +jasmine MACH_JASMINE JASMINE 3735 +l138_owlboard_plus MACH_L138_OWLBOARD_PLUS L138_OWLBOARD_PLUS 3736 +wr21 MACH_WR21 WR21 3737 +peaboy MACH_PEABOY PEABOY 3739 +mx28_plato MACH_MX28_PLATO MX28_PLATO 3740 +kacom2 MACH_KACOM2 KACOM2 3741 +slco MACH_SLCO SLCO 3742 +imx51pico MACH_IMX51PICO IMX51PICO 3743 +glink1 MACH_GLINK1 GLINK1 3744 +diamond MACH_DIAMOND DIAMOND 3745 +d9000 MACH_D9000 D9000 3746 +w5300e01 MACH_W5300E01 W5300E01 3747 +im6000 MACH_IM6000 IM6000 3748 +mx51_fred51 MACH_MX51_FRED51 MX51_FRED51 3749 +stm32f2 MACH_STM32F2 STM32F2 3750 +ville MACH_VILLE VILLE 3751 +ptip_murnau MACH_PTIP_MURNAU PTIP_MURNAU 3752 +ptip_classic MACH_PTIP_CLASSIC PTIP_CLASSIC 3753 +mx53grb MACH_MX53GRB MX53GRB 3754 +gagarin MACH_GAGARIN GAGARIN 3755 +nas2big MACH_NAS2BIG NAS2BIG 3757 +superfemto MACH_SUPERFEMTO SUPERFEMTO 3758 +teufel MACH_TEUFEL TEUFEL 3759 +dinara MACH_DINARA DINARA 3760 +vanquish MACH_VANQUISH VANQUISH 3761 +zipabox1 MACH_ZIPABOX1 ZIPABOX1 3762 +u9540 MACH_U9540 U9540 3763 +jet MACH_JET JET 3764 smdk4412 MACH_SMDK4412 SMDK4412 3765 +elite MACH_ELITE ELITE 3766 +spear320_hmi MACH_SPEAR320_HMI SPEAR320_HMI 3767 +ontario MACH_ONTARIO ONTARIO 3768 +mx6q_sabrelite MACH_MX6Q_SABRELITE MX6Q_SABRELITE 3769 +vc200 MACH_VC200 VC200 3770 +msm7625a_ffa MACH_MSM7625A_FFA MSM7625A_FFA 3771 +msm7625a_surf MACH_MSM7625A_SURF MSM7625A_SURF 3772 +benthossbp MACH_BENTHOSSBP BENTHOSSBP 3773 +smdk5210 MACH_SMDK5210 SMDK5210 3774 +empq2300 MACH_EMPQ2300 EMPQ2300 3775 +minipos MACH_MINIPOS MINIPOS 3776 +omap5_sevm MACH_OMAP5_SEVM OMAP5_SEVM 3777 +shelter MACH_SHELTER SHELTER 3778 +omap3_devkit8500 MACH_OMAP3_DEVKIT8500 OMAP3_DEVKIT8500 3779 +edgetd MACH_EDGETD EDGETD 3780 +copperyard MACH_COPPERYARD COPPERYARD 3781 +edge MACH_EDGE EDGE 3782 +edge_u MACH_EDGE_U EDGE_U 3783 +edge_td MACH_EDGE_TD EDGE_TD 3784 +wdss MACH_WDSS WDSS 3785 +dl_pb25 MACH_DL_PB25 DL_PB25 3786 +dss11 MACH_DSS11 DSS11 3787 +cpa MACH_CPA CPA 3788 +aptp2000 MACH_APTP2000 APTP2000 3789 +marzen MACH_MARZEN MARZEN 3790 +st_turbine MACH_ST_TURBINE ST_TURBINE 3791 +gtl_it3300 MACH_GTL_IT3300 GTL_IT3300 3792 +mx6_mule MACH_MX6_MULE MX6_MULE 3793 +v7pxa_dt MACH_V7PXA_DT V7PXA_DT 3794 +v7mmp_dt MACH_V7MMP_DT V7MMP_DT 3795 +dragon7 MACH_DRAGON7 DRAGON7 3796 +krome MACH_KROME KROME 3797 +oratisdante MACH_ORATISDANTE ORATISDANTE 3798 +fathom MACH_FATHOM FATHOM 3799 +dns325 MACH_DNS325 DNS325 3800 +sarnen MACH_SARNEN SARNEN 3801 +ubisys_g1 MACH_UBISYS_G1 UBISYS_G1 3802 +mx53_pf1 MACH_MX53_PF1 MX53_PF1 3803 +asanti MACH_ASANTI ASANTI 3804 +volta MACH_VOLTA VOLTA 3805 +knight MACH_KNIGHT KNIGHT 3807 +beaglebone MACH_BEAGLEBONE BEAGLEBONE 3808 +becker MACH_BECKER BECKER 3809 +fc360 MACH_FC360 FC360 3810 +pmi2_xls MACH_PMI2_XLS PMI2_XLS 3811 +taranto MACH_TARANTO TARANTO 3812 +plutux MACH_PLUTUX PLUTUX 3813 +ipmp_medcom MACH_IPMP_MEDCOM IPMP_MEDCOM 3814 +absolut MACH_ABSOLUT ABSOLUT 3815 +awpb3 MACH_AWPB3 AWPB3 3816 +nfp32xx_dt MACH_NFP32XX_DT NFP32XX_DT 3817 +dl_pb53 MACH_DL_PB53 DL_PB53 3818 +acu_ii MACH_ACU_II ACU_II 3819 +avalon MACH_AVALON AVALON 3820 +sphinx MACH_SPHINX SPHINX 3821 +titan_t MACH_TITAN_T TITAN_T 3822 +harvest_boris MACH_HARVEST_BORIS HARVEST_BORIS 3823 +mach_msm7x30_m3s MACH_MACH_MSM7X30_M3S MACH_MSM7X30_M3S 3824 +smdk5250 MACH_SMDK5250 SMDK5250 3825 +imxt_lite MACH_IMXT_LITE IMXT_LITE 3826 +imxt_std MACH_IMXT_STD IMXT_STD 3827 +imxt_log MACH_IMXT_LOG IMXT_LOG 3828 +imxt_nav MACH_IMXT_NAV IMXT_NAV 3829 +imxt_full MACH_IMXT_FULL IMXT_FULL 3830 +ag09015 MACH_AG09015 AG09015 3831 +am3517_mt_ventoux MACH_AM3517_MT_VENTOUX AM3517_MT_VENTOUX 3832 +dp1arm9 MACH_DP1ARM9 DP1ARM9 3833 +picasso_m MACH_PICASSO_M PICASSO_M 3834 +video_gadget MACH_VIDEO_GADGET VIDEO_GADGET 3835 +mtt_om3x MACH_MTT_OM3X MTT_OM3X 3836 +mx6q_arm2 MACH_MX6Q_ARM2 MX6Q_ARM2 3837 +picosam9g45 MACH_PICOSAM9G45 PICOSAM9G45 3838 +vpm_dm365 MACH_VPM_DM365 VPM_DM365 3839 +bonfire MACH_BONFIRE BONFIRE 3840 +mt2p2d MACH_MT2P2D MT2P2D 3841 +sigpda01 MACH_SIGPDA01 SIGPDA01 3842 +cn27 MACH_CN27 CN27 3843 +mx25_cwtap MACH_MX25_CWTAP MX25_CWTAP 3844 +apf28 MACH_APF28 APF28 3845 +pelco_maxwell MACH_PELCO_MAXWELL PELCO_MAXWELL 3846 +ge_phoenix MACH_GE_PHOENIX GE_PHOENIX 3847 +empc_a500 MACH_EMPC_A500 EMPC_A500 3848 +ims_arm9 MACH_IMS_ARM9 IMS_ARM9 3849 +mini2416 MACH_MINI2416 MINI2416 3850 +mini2450 MACH_MINI2450 MINI2450 3851 +mini310 MACH_MINI310 MINI310 3852 +spear_hurricane MACH_SPEAR_HURRICANE SPEAR_HURRICANE 3853 +mt7208 MACH_MT7208 MT7208 3854 +lpc178x MACH_LPC178X LPC178X 3855 +farleys MACH_FARLEYS FARLEYS 3856 +efm32gg_dk3750 MACH_EFM32GG_DK3750 EFM32GG_DK3750 3857 +zeus_board MACH_ZEUS_BOARD ZEUS_BOARD 3858 +cc51 MACH_CC51 CC51 3859 +fxi_c210 MACH_FXI_C210 FXI_C210 3860 +msm8627_cdp MACH_MSM8627_CDP MSM8627_CDP 3861 +msm8627_mtp MACH_MSM8627_MTP MSM8627_MTP 3862 +armadillo800eva MACH_ARMADILLO800EVA ARMADILLO800EVA 3863 +primou MACH_PRIMOU PRIMOU 3864 +primoc MACH_PRIMOC PRIMOC 3865 +primoct MACH_PRIMOCT PRIMOCT 3866 +a9500 MACH_A9500 A9500 3867 +pluto MACH_PLUTO PLUTO 3869 +acfx100 MACH_ACFX100 ACFX100 3870 +msm8625_rumi3 MACH_MSM8625_RUMI3 MSM8625_RUMI3 3871 +valente MACH_VALENTE VALENTE 3872 +crfs_rfeye MACH_CRFS_RFEYE CRFS_RFEYE 3873 +rfeye MACH_RFEYE RFEYE 3874 +phidget_sbc3 MACH_PHIDGET_SBC3 PHIDGET_SBC3 3875 +tcw_mika MACH_TCW_MIKA TCW_MIKA 3876 +imx28_egf MACH_IMX28_EGF IMX28_EGF 3877 +valente_wx MACH_VALENTE_WX VALENTE_WX 3878 +huangshans MACH_HUANGSHANS HUANGSHANS 3879 +bosphorus1 MACH_BOSPHORUS1 BOSPHORUS1 3880 +prima MACH_PRIMA PRIMA 3881 +evita_ulk MACH_EVITA_ULK EVITA_ULK 3884 +merisc600 MACH_MERISC600 MERISC600 3885 +dolak MACH_DOLAK DOLAK 3886 +sbc53 MACH_SBC53 SBC53 3887 +elite_ulk MACH_ELITE_ULK ELITE_ULK 3888 +pov2 MACH_POV2 POV2 3889 +ipod_touch_2g MACH_IPOD_TOUCH_2G IPOD_TOUCH_2G 3890 +da850_pqab MACH_DA850_PQAB DA850_PQAB 3891 diff --git a/arch/ia64/include/asm/cputime.h b/arch/ia64/include/asm/cputime.h index 6073b187528a..5a274af31b2b 100644 --- a/arch/ia64/include/asm/cputime.h +++ b/arch/ia64/include/asm/cputime.h @@ -60,6 +60,7 @@ typedef u64 cputime64_t; */ #define cputime_to_usecs(__ct) ((__ct) / NSEC_PER_USEC) #define usecs_to_cputime(__usecs) ((__usecs) * NSEC_PER_USEC) +#define usecs_to_cputime64(__usecs) usecs_to_cputime(__usecs) /* * Convert cputime <-> seconds diff --git a/arch/powerpc/include/asm/cputime.h b/arch/powerpc/include/asm/cputime.h index 1cf20bdfbeca..98b7c4b49c9d 100644 --- a/arch/powerpc/include/asm/cputime.h +++ b/arch/powerpc/include/asm/cputime.h @@ -150,6 +150,8 @@ static inline cputime_t usecs_to_cputime(const unsigned long us) return ct; } +#define usecs_to_cputime64(us) usecs_to_cputime(us) + /* * Convert cputime <-> seconds */ diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h index d4df013ad779..69c7377d2071 100644 --- a/arch/powerpc/include/asm/kvm_book3s.h +++ b/arch/powerpc/include/asm/kvm_book3s.h @@ -381,39 +381,6 @@ static inline bool kvmppc_critical_section(struct kvm_vcpu *vcpu) } #endif -static inline unsigned long compute_tlbie_rb(unsigned long v, unsigned long r, - unsigned long pte_index) -{ - unsigned long rb, va_low; - - rb = (v & ~0x7fUL) << 16; /* AVA field */ - va_low = pte_index >> 3; - if (v & HPTE_V_SECONDARY) - va_low = ~va_low; - /* xor vsid from AVA */ - if (!(v & HPTE_V_1TB_SEG)) - va_low ^= v >> 12; - else - va_low ^= v >> 24; - va_low &= 0x7ff; - if (v & HPTE_V_LARGE) { - rb |= 1; /* L field */ - if (cpu_has_feature(CPU_FTR_ARCH_206) && - (r & 0xff000)) { - /* non-16MB large page, must be 64k */ - /* (masks depend on page size) */ - rb |= 0x1000; /* page encoding in LP field */ - rb |= (va_low & 0x7f) << 16; /* 7b of VA in AVA/LP field */ - rb |= (va_low & 0xfe); /* AVAL field (P7 doesn't seem to care) */ - } - } else { - /* 4kB page */ - rb |= (va_low & 0x7ff) << 12; /* remaining 11b of VA */ - } - rb |= (v >> 54) & 0x300; /* B field */ - return rb; -} - /* Magic register values loaded into r3 and r4 before the 'sc' assembly * instruction for the OSI hypercalls */ #define OSI_SC_MAGIC_R3 0x113724FA diff --git a/arch/powerpc/include/asm/kvm_book3s_64.h b/arch/powerpc/include/asm/kvm_book3s_64.h index e43fe42b9875..d0ac94f98f9e 100644 --- a/arch/powerpc/include/asm/kvm_book3s_64.h +++ b/arch/powerpc/include/asm/kvm_book3s_64.h @@ -29,4 +29,37 @@ static inline struct kvmppc_book3s_shadow_vcpu *to_svcpu(struct kvm_vcpu *vcpu) #define SPAPR_TCE_SHIFT 12 +static inline unsigned long compute_tlbie_rb(unsigned long v, unsigned long r, + unsigned long pte_index) +{ + unsigned long rb, va_low; + + rb = (v & ~0x7fUL) << 16; /* AVA field */ + va_low = pte_index >> 3; + if (v & HPTE_V_SECONDARY) + va_low = ~va_low; + /* xor vsid from AVA */ + if (!(v & HPTE_V_1TB_SEG)) + va_low ^= v >> 12; + else + va_low ^= v >> 24; + va_low &= 0x7ff; + if (v & HPTE_V_LARGE) { + rb |= 1; /* L field */ + if (cpu_has_feature(CPU_FTR_ARCH_206) && + (r & 0xff000)) { + /* non-16MB large page, must be 64k */ + /* (masks depend on page size) */ + rb |= 0x1000; /* page encoding in LP field */ + rb |= (va_low & 0x7f) << 16; /* 7b of VA in AVA/LP field */ + rb |= (va_low & 0xfe); /* AVAL field (P7 doesn't seem to care) */ + } + } else { + /* 4kB page */ + rb |= (va_low & 0x7ff) << 12; /* remaining 11b of VA */ + } + rb |= (v >> 54) & 0x300; /* B field */ + return rb; +} + #endif /* __ASM_KVM_BOOK3S_64_H__ */ diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index 0cb137a9b038..336983da9e72 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -538,7 +538,7 @@ static void kvmppc_start_thread(struct kvm_vcpu *vcpu) tpaca->kvm_hstate.napping = 0; vcpu->cpu = vc->pcpu; smp_wmb(); -#ifdef CONFIG_PPC_ICP_NATIVE +#if defined(CONFIG_PPC_ICP_NATIVE) && defined(CONFIG_SMP) if (vcpu->arch.ptid) { tpaca->cpu_start = 0x80; wmb(); diff --git a/arch/powerpc/kvm/book3s_pr.c b/arch/powerpc/kvm/book3s_pr.c index 3c791e1eb675..e2cfb9e1e20e 100644 --- a/arch/powerpc/kvm/book3s_pr.c +++ b/arch/powerpc/kvm/book3s_pr.c @@ -658,10 +658,12 @@ program_interrupt: ulong cmd = kvmppc_get_gpr(vcpu, 3); int i; +#ifdef CONFIG_KVM_BOOK3S_64_PR if (kvmppc_h_pr(vcpu, cmd) == EMULATE_DONE) { r = RESUME_GUEST; break; } +#endif run->papr_hcall.nr = cmd; for (i = 0; i < 9; ++i) { diff --git a/arch/powerpc/kvm/e500.c b/arch/powerpc/kvm/e500.c index 26d20903f2bc..8c0d45a6faf7 100644 --- a/arch/powerpc/kvm/e500.c +++ b/arch/powerpc/kvm/e500.c @@ -15,6 +15,7 @@ #include <linux/kvm_host.h> #include <linux/slab.h> #include <linux/err.h> +#include <linux/export.h> #include <asm/reg.h> #include <asm/cputable.h> diff --git a/arch/s390/include/asm/cputime.h b/arch/s390/include/asm/cputime.h index 081434878296..b9acaaa175d8 100644 --- a/arch/s390/include/asm/cputime.h +++ b/arch/s390/include/asm/cputime.h @@ -87,6 +87,8 @@ usecs_to_cputime(const unsigned int m) return (cputime_t) m * 4096; } +#define usecs_to_cputime64(m) usecs_to_cputime(m) + /* * Convert cputime to milliseconds and back. */ diff --git a/arch/sh/oprofile/common.c b/arch/sh/oprofile/common.c index b4c2d2b946dd..e4dd5d5a1115 100644 --- a/arch/sh/oprofile/common.c +++ b/arch/sh/oprofile/common.c @@ -49,7 +49,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) return oprofile_perf_init(ops); } -void __exit oprofile_arch_exit(void) +void oprofile_arch_exit(void) { oprofile_perf_exit(); kfree(sh_pmu_op_name); @@ -60,5 +60,5 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) ops->backtrace = sh_backtrace; return -ENODEV; } -void __exit oprofile_arch_exit(void) {} +void oprofile_arch_exit(void) {} #endif /* CONFIG_HW_PERF_EVENTS */ diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index 8d601b18bf9f..121f1be4da19 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -1169,7 +1169,7 @@ again: */ c = &unconstrained; } else if (intel_try_alt_er(event, orig_idx)) { - raw_spin_unlock(&era->lock); + raw_spin_unlock_irqrestore(&era->lock, flags); goto again; } raw_spin_unlock_irqrestore(&era->lock, flags); diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c index 76e3f1cd0369..405f2620392f 100644 --- a/arch/x86/kvm/i8254.c +++ b/arch/x86/kvm/i8254.c @@ -338,11 +338,15 @@ static enum hrtimer_restart pit_timer_fn(struct hrtimer *data) return HRTIMER_NORESTART; } -static void create_pit_timer(struct kvm_kpit_state *ps, u32 val, int is_period) +static void create_pit_timer(struct kvm *kvm, u32 val, int is_period) { + struct kvm_kpit_state *ps = &kvm->arch.vpit->pit_state; struct kvm_timer *pt = &ps->pit_timer; s64 interval; + if (!irqchip_in_kernel(kvm)) + return; + interval = muldiv64(val, NSEC_PER_SEC, KVM_PIT_FREQ); pr_debug("create pit timer, interval is %llu nsec\n", interval); @@ -394,13 +398,13 @@ static void pit_load_count(struct kvm *kvm, int channel, u32 val) /* FIXME: enhance mode 4 precision */ case 4: if (!(ps->flags & KVM_PIT_FLAGS_HPET_LEGACY)) { - create_pit_timer(ps, val, 0); + create_pit_timer(kvm, val, 0); } break; case 2: case 3: if (!(ps->flags & KVM_PIT_FLAGS_HPET_LEGACY)){ - create_pit_timer(ps, val, 1); + create_pit_timer(kvm, val, 1); } break; default: diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index c38efd7b792e..4c938da2ba00 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -602,7 +602,6 @@ static void update_cpuid(struct kvm_vcpu *vcpu) { struct kvm_cpuid_entry2 *best; struct kvm_lapic *apic = vcpu->arch.apic; - u32 timer_mode_mask; best = kvm_find_cpuid_entry(vcpu, 1, 0); if (!best) @@ -615,15 +614,12 @@ static void update_cpuid(struct kvm_vcpu *vcpu) best->ecx |= bit(X86_FEATURE_OSXSAVE); } - if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && - best->function == 0x1) { - best->ecx |= bit(X86_FEATURE_TSC_DEADLINE_TIMER); - timer_mode_mask = 3 << 17; - } else - timer_mode_mask = 1 << 17; - - if (apic) - apic->lapic_timer.timer_mode_mask = timer_mode_mask; + if (apic) { + if (best->ecx & bit(X86_FEATURE_TSC_DEADLINE_TIMER)) + apic->lapic_timer.timer_mode_mask = 3 << 17; + else + apic->lapic_timer.timer_mode_mask = 1 << 17; + } } int kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4) @@ -2135,6 +2131,9 @@ int kvm_dev_ioctl_check_extension(long ext) case KVM_CAP_TSC_CONTROL: r = kvm_has_tsc_control; break; + case KVM_CAP_TSC_DEADLINE_TIMER: + r = boot_cpu_has(X86_FEATURE_TSC_DEADLINE_TIMER); + break; default: r = 0; break; diff --git a/block/blk-map.c b/block/blk-map.c index 164cd0059706..623e1cd4cffe 100644 --- a/block/blk-map.c +++ b/block/blk-map.c @@ -311,7 +311,7 @@ int blk_rq_map_kern(struct request_queue *q, struct request *rq, void *kbuf, if (IS_ERR(bio)) return PTR_ERR(bio); - if (rq_data_dir(rq) == WRITE) + if (!reading) bio->bi_rw |= REQ_WRITE; if (do_copy) diff --git a/block/blk-tag.c b/block/blk-tag.c index e74d6d13838f..4af6f5cc1167 100644 --- a/block/blk-tag.c +++ b/block/blk-tag.c @@ -282,18 +282,9 @@ EXPORT_SYMBOL(blk_queue_resize_tags); void blk_queue_end_tag(struct request_queue *q, struct request *rq) { struct blk_queue_tag *bqt = q->queue_tags; - int tag = rq->tag; + unsigned tag = rq->tag; /* negative tags invalid */ - BUG_ON(tag == -1); - - if (unlikely(tag >= bqt->max_depth)) { - /* - * This can happen after tag depth has been reduced. - * But tag shouldn't be larger than real_max_depth. - */ - WARN_ON(tag >= bqt->real_max_depth); - return; - } + BUG_ON(tag >= bqt->real_max_depth); list_del_init(&rq->queuelist); rq->cmd_flags &= ~REQ_QUEUED; diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 4c12869fcf77..3548705b04e4 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -1655,6 +1655,8 @@ cfq_merged_requests(struct request_queue *q, struct request *rq, struct request *next) { struct cfq_queue *cfqq = RQ_CFQQ(rq); + struct cfq_data *cfqd = q->elevator->elevator_data; + /* * reposition in fifo if next is older than rq */ @@ -1669,6 +1671,16 @@ cfq_merged_requests(struct request_queue *q, struct request *rq, cfq_remove_request(next); cfq_blkiocg_update_io_merged_stats(&(RQ_CFQG(rq))->blkg, rq_data_dir(next), rq_is_sync(next)); + + cfqq = RQ_CFQQ(next); + /* + * all requests of this queue are merged to other queues, delete it + * from the service tree. If it's the active_queue, + * cfq_dispatch_requests() will choose to expire it or do idle + */ + if (cfq_cfqq_on_rr(cfqq) && RB_EMPTY_ROOT(&cfqq->sort_list) && + cfqq != cfqd->active_queue) + cfq_del_cfqq_rr(cfqd, cfqq); } static int cfq_allow_merge(struct request_queue *q, struct request *rq, diff --git a/drivers/clocksource/clksrc-dbx500-prcmu.c b/drivers/clocksource/clksrc-dbx500-prcmu.c index 59feefe0e3e6..fb6b6d28b60e 100644 --- a/drivers/clocksource/clksrc-dbx500-prcmu.c +++ b/drivers/clocksource/clksrc-dbx500-prcmu.c @@ -58,25 +58,15 @@ static struct clocksource clocksource_dbx500_prcmu = { }; #ifdef CONFIG_CLKSRC_DBX500_PRCMU_SCHED_CLOCK -static DEFINE_CLOCK_DATA(cd); -unsigned long long notrace sched_clock(void) +static u32 notrace dbx500_prcmu_sched_clock_read(void) { - u32 cyc; - if (unlikely(!clksrc_dbx500_timer_base)) return 0; - cyc = clksrc_dbx500_prcmu_read(&clocksource_dbx500_prcmu); - - return cyc_to_sched_clock(&cd, cyc, (u32)~0); + return clksrc_dbx500_prcmu_read(&clocksource_dbx500_prcmu); } -static void notrace clksrc_dbx500_prcmu_update_sched_clock(void) -{ - u32 cyc = clksrc_dbx500_prcmu_read(&clocksource_dbx500_prcmu); - update_sched_clock(&cd, cyc, (u32)~0); -} #endif void __init clksrc_dbx500_prcmu_init(void __iomem *base) @@ -97,7 +87,7 @@ void __init clksrc_dbx500_prcmu_init(void __iomem *base) clksrc_dbx500_timer_base + PRCMU_TIMER_REF); } #ifdef CONFIG_CLKSRC_DBX500_PRCMU_SCHED_CLOCK - init_sched_clock(&cd, clksrc_dbx500_prcmu_update_sched_clock, + setup_sched_clock(dbx500_prcmu_sched_clock_read, 32, RATE_32K); #endif clocksource_calc_mult_shift(&clocksource_dbx500_prcmu, diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index ab8f469f5cf8..5a99bb3f255a 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -124,7 +124,7 @@ config MV_XOR config MX3_IPU bool "MX3x Image Processing Unit support" - depends on ARCH_MX3 + depends on SOC_IMX31 ||Â SOC_IMX35 select DMA_ENGINE default y help @@ -216,7 +216,7 @@ config PCH_DMA config IMX_SDMA tristate "i.MX SDMA support" - depends on ARCH_MX25 || ARCH_MX3 || ARCH_MX5 + depends on ARCH_MX25 || SOC_IMX31 ||Â SOC_IMX35 || ARCH_MX5 select DMA_ENGINE help Support the i.MX SDMA engine. This engine is integrated into diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index 571041477ab2..a626e15799a5 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -19,6 +19,7 @@ #include <linux/amba/pl330.h> #include <linux/pm_runtime.h> #include <linux/scatterlist.h> +#include <linux/of.h> #define NR_DEFAULT_DESC 16 @@ -116,6 +117,9 @@ struct dma_pl330_desc { struct dma_pl330_chan *pchan; }; +/* forward declaration */ +static struct amba_driver pl330_driver; + static inline struct dma_pl330_chan * to_pchan(struct dma_chan *ch) { @@ -267,6 +271,32 @@ static void dma_pl330_rqcb(void *token, enum pl330_op_err err) tasklet_schedule(&pch->task); } +bool pl330_filter(struct dma_chan *chan, void *param) +{ + u8 *peri_id; + + if (chan->device->dev->driver != &pl330_driver.drv) + return false; + +#ifdef CONFIG_OF + if (chan->device->dev->of_node) { + const __be32 *prop_value; + phandle phandle; + struct device_node *node; + + prop_value = ((struct property *)param)->value; + phandle = be32_to_cpup(prop_value++); + node = of_find_node_by_phandle(phandle); + return ((chan->private == node) && + (chan->chan_id == be32_to_cpup(prop_value))); + } +#endif + + peri_id = chan->private; + return *peri_id == (unsigned)param; +} +EXPORT_SYMBOL(pl330_filter); + static int pl330_alloc_chan_resources(struct dma_chan *chan) { struct dma_pl330_chan *pch = to_pchan(chan); @@ -497,7 +527,7 @@ pluck_desc(struct dma_pl330_dmac *pdmac) static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch) { struct dma_pl330_dmac *pdmac = pch->dmac; - struct dma_pl330_peri *peri = pch->chan.private; + u8 *peri_id = pch->chan.private; struct dma_pl330_desc *desc; /* Pluck one desc from the pool of DMAC */ @@ -522,13 +552,7 @@ static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch) desc->txd.cookie = 0; async_tx_ack(&desc->txd); - if (peri) { - desc->req.rqtype = peri->rqtype; - desc->req.peri = pch->chan.chan_id; - } else { - desc->req.rqtype = MEMTOMEM; - desc->req.peri = 0; - } + desc->req.peri = peri_id ? pch->chan.chan_id : 0; dma_async_tx_descriptor_init(&desc->txd, &pch->chan); @@ -615,12 +639,14 @@ static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic( case DMA_TO_DEVICE: desc->rqcfg.src_inc = 1; desc->rqcfg.dst_inc = 0; + desc->req.rqtype = MEMTODEV; src = dma_addr; dst = pch->fifo_addr; break; case DMA_FROM_DEVICE: desc->rqcfg.src_inc = 0; desc->rqcfg.dst_inc = 1; + desc->req.rqtype = DEVTOMEM; src = pch->fifo_addr; dst = dma_addr; break; @@ -646,16 +672,12 @@ pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst, { struct dma_pl330_desc *desc; struct dma_pl330_chan *pch = to_pchan(chan); - struct dma_pl330_peri *peri = chan->private; struct pl330_info *pi; int burst; if (unlikely(!pch || !len)) return NULL; - if (peri && peri->rqtype != MEMTOMEM) - return NULL; - pi = &pch->dmac->pif; desc = __pl330_prep_dma_memcpy(pch, dst, src, len); @@ -664,6 +686,7 @@ pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst, desc->rqcfg.src_inc = 1; desc->rqcfg.dst_inc = 1; + desc->req.rqtype = MEMTOMEM; /* Select max possible burst size */ burst = pi->pcfg.data_bus_width / 8; @@ -692,25 +715,14 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, { struct dma_pl330_desc *first, *desc = NULL; struct dma_pl330_chan *pch = to_pchan(chan); - struct dma_pl330_peri *peri = chan->private; struct scatterlist *sg; unsigned long flags; int i; dma_addr_t addr; - if (unlikely(!pch || !sgl || !sg_len || !peri)) + if (unlikely(!pch || !sgl || !sg_len)) return NULL; - /* Make sure the direction is consistent */ - if ((direction == DMA_TO_DEVICE && - peri->rqtype != MEMTODEV) || - (direction == DMA_FROM_DEVICE && - peri->rqtype != DEVTOMEM)) { - dev_err(pch->dmac->pif.dev, "%s:%d Invalid Direction\n", - __func__, __LINE__); - return NULL; - } - addr = pch->fifo_addr; first = NULL; @@ -750,11 +762,13 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, if (direction == DMA_TO_DEVICE) { desc->rqcfg.src_inc = 1; desc->rqcfg.dst_inc = 0; + desc->req.rqtype = MEMTODEV; fill_px(&desc->px, addr, sg_dma_address(sg), sg_dma_len(sg)); } else { desc->rqcfg.src_inc = 0; desc->rqcfg.dst_inc = 1; + desc->req.rqtype = DEVTOMEM; fill_px(&desc->px, sg_dma_address(sg), addr, sg_dma_len(sg)); } @@ -856,32 +870,16 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) INIT_LIST_HEAD(&pd->channels); /* Initialize channel parameters */ - num_chan = max(pdat ? pdat->nr_valid_peri : 0, (u8)pi->pcfg.num_chan); + num_chan = max(pdat ? pdat->nr_valid_peri : (u8)pi->pcfg.num_peri, + (u8)pi->pcfg.num_chan); pdmac->peripherals = kzalloc(num_chan * sizeof(*pch), GFP_KERNEL); for (i = 0; i < num_chan; i++) { pch = &pdmac->peripherals[i]; - if (pdat) { - struct dma_pl330_peri *peri = &pdat->peri[i]; - - switch (peri->rqtype) { - case MEMTOMEM: - dma_cap_set(DMA_MEMCPY, pd->cap_mask); - break; - case MEMTODEV: - case DEVTOMEM: - dma_cap_set(DMA_SLAVE, pd->cap_mask); - dma_cap_set(DMA_CYCLIC, pd->cap_mask); - break; - default: - dev_err(&adev->dev, "DEVTODEV Not Supported\n"); - continue; - } - pch->chan.private = peri; - } else { - dma_cap_set(DMA_MEMCPY, pd->cap_mask); - pch->chan.private = NULL; - } + if (!adev->dev.of_node) + pch->chan.private = pdat ? &pdat->peri_id[i] : NULL; + else + pch->chan.private = adev->dev.of_node; INIT_LIST_HEAD(&pch->work_list); spin_lock_init(&pch->lock); @@ -894,6 +892,15 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) } pd->dev = &adev->dev; + if (pdat) { + pd->cap_mask = pdat->cap_mask; + } else { + dma_cap_set(DMA_MEMCPY, pd->cap_mask); + if (pi->pcfg.num_peri) { + dma_cap_set(DMA_SLAVE, pd->cap_mask); + dma_cap_set(DMA_CYCLIC, pd->cap_mask); + } + } pd->device_alloc_chan_resources = pl330_alloc_chan_resources; pd->device_free_chan_resources = pl330_free_chan_resources; diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index 866251852719..6b4d23fd158e 100644 --- a/drivers/gpio/gpio-samsung.c +++ b/drivers/gpio/gpio-samsung.c @@ -24,6 +24,9 @@ #include <linux/interrupt.h> #include <linux/sysdev.h> #include <linux/ioport.h> +#include <linux/of.h> +#include <linux/slab.h> +#include <linux/of_address.h> #include <asm/irq.h> @@ -2374,6 +2377,63 @@ static struct samsung_gpio_chip exynos4_gpios_3[] = { #endif }; +#if defined(CONFIG_ARCH_EXYNOS4) && defined(CONFIG_OF) +static int exynos4_gpio_xlate(struct gpio_chip *gc, struct device_node *np, + const void *gpio_spec, u32 *flags) +{ + const __be32 *gpio = gpio_spec; + const u32 n = be32_to_cpup(gpio); + unsigned int pin = gc->base + be32_to_cpu(gpio[0]); + + if (WARN_ON(gc->of_gpio_n_cells < 4)) + return -EINVAL; + + if (n > gc->ngpio) + return -EINVAL; + + if (s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(be32_to_cpu(gpio[1])))) + pr_warn("gpio_xlate: failed to set pin function\n"); + if (s3c_gpio_setpull(pin, be32_to_cpu(gpio[2]))) + pr_warn("gpio_xlate: failed to set pin pull up/down\n"); + if (s5p_gpio_set_drvstr(pin, be32_to_cpu(gpio[3]))) + pr_warn("gpio_xlate: failed to set pin drive strength\n"); + + return n; +} + +static const struct of_device_id exynos4_gpio_dt_match[] __initdata = { + { .compatible = "samsung,exynos4-gpio", }, + {} +}; + +static __init void exynos4_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip, + u64 base, u64 offset) +{ + struct gpio_chip *gc = &chip->chip; + u64 address; + + if (!of_have_populated_dt()) + return; + + address = chip->base ? base + ((u32)chip->base & 0xfff) : base + offset; + gc->of_node = of_find_matching_node_by_address(NULL, + exynos4_gpio_dt_match, address); + if (!gc->of_node) { + pr_info("gpio: device tree node not found for gpio controller" + " with base address %08llx\n", address); + return; + } + gc->of_gpio_n_cells = 4; + gc->of_xlate = exynos4_gpio_xlate; +} +#elif defined(CONFIG_ARCH_EXYNOS4) +static __init void exynos4_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip, + u64 base, u64 offset) +{ + return; +} +#endif /* defined(CONFIG_ARCH_EXYNOS4) && defined(CONFIG_OF) */ + /* TODO: cleanup soc_is_* */ static __init int samsung_gpiolib_init(void) { @@ -2455,6 +2515,10 @@ static __init int samsung_gpiolib_init(void) chip->config = &exynos4_gpio_cfg; chip->group = group++; } +#ifdef CONFIG_CPU_EXYNOS4210 + exynos4_gpiolib_attach_ofnode(chip, + EXYNOS4_PA_GPIO1, i * 0x20); +#endif } samsung_gpiolib_add_4bit_chips(exynos4_gpios_1, nr_chips, S5P_VA_GPIO1); @@ -2467,6 +2531,10 @@ static __init int samsung_gpiolib_init(void) chip->config = &exynos4_gpio_cfg; chip->group = group++; } +#ifdef CONFIG_CPU_EXYNOS4210 + exynos4_gpiolib_attach_ofnode(chip, + EXYNOS4_PA_GPIO2, i * 0x20); +#endif } samsung_gpiolib_add_4bit_chips(exynos4_gpios_2, nr_chips, S5P_VA_GPIO2); @@ -2479,6 +2547,10 @@ static __init int samsung_gpiolib_init(void) chip->config = &exynos4_gpio_cfg; chip->group = group++; } +#ifdef CONFIG_CPU_EXYNOS4210 + exynos4_gpiolib_attach_ofnode(chip, + EXYNOS4_PA_GPIO3, i * 0x20); +#endif } samsung_gpiolib_add_4bit_chips(exynos4_gpios_3, nr_chips, S5P_VA_GPIO3); diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index c681dc149d2a..b9da8900ae4e 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -756,9 +756,9 @@ intel_enable_semaphores(struct drm_device *dev) if (i915_semaphores >= 0) return i915_semaphores; - /* Enable semaphores on SNB when IO remapping is off */ + /* Disable semaphores on SNB */ if (INTEL_INFO(dev)->gen == 6) - return !intel_iommu_enabled; + return 0; return 1; } diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index d809b038ca88..daa5743ccbd6 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -7922,13 +7922,11 @@ static bool intel_enable_rc6(struct drm_device *dev) return 0; /* - * Enable rc6 on Sandybridge if DMA remapping is disabled + * Disable rc6 on Sandybridge */ if (INTEL_INFO(dev)->gen == 6) { - DRM_DEBUG_DRIVER("Sandybridge: intel_iommu_enabled %s -- RC6 %sabled\n", - intel_iommu_enabled ? "true" : "false", - !intel_iommu_enabled ? "en" : "dis"); - return !intel_iommu_enabled; + DRM_DEBUG_DRIVER("Sandybridge: RC6 disabled\n"); + return 0; } DRM_DEBUG_DRIVER("RC6 enabled\n"); return 1; diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 5e00d1670aa9..92c9628c572d 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -3276,6 +3276,18 @@ int evergreen_init(struct radeon_device *rdev) rdev->accel_working = false; } } + + /* Don't start up if the MC ucode is missing on BTC parts. + * The default clocks and voltages before the MC ucode + * is loaded are not suffient for advanced operations. + */ + if (ASIC_IS_DCE5(rdev)) { + if (!rdev->mc_fw && !(rdev->flags & RADEON_IS_IGP)) { + DRM_ERROR("radeon: MC ucode required for NI+.\n"); + return -EINVAL; + } + } + return 0; } diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index 8aa1dbb45c67..f94b33ae2215 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -1093,7 +1093,6 @@ static struct drm_framebuffer *vmw_kms_fb_create(struct drm_device *dev, struct vmw_surface *surface = NULL; struct vmw_dma_buffer *bo = NULL; struct ttm_base_object *user_obj; - u64 required_size; int ret; /** @@ -1102,8 +1101,9 @@ static struct drm_framebuffer *vmw_kms_fb_create(struct drm_device *dev, * requested framebuffer. */ - required_size = mode_cmd->pitch * mode_cmd->height; - if (unlikely(required_size > (u64) dev_priv->vram_size)) { + if (!vmw_kms_validate_mode_vram(dev_priv, + mode_cmd->pitch, + mode_cmd->height)) { DRM_ERROR("VRAM size is too small for requested mode.\n"); return ERR_PTR(-ENOMEM); } diff --git a/drivers/input/keyboard/samsung-keypad.c b/drivers/input/keyboard/samsung-keypad.c index f689f49e3109..8a0060cd3982 100644 --- a/drivers/input/keyboard/samsung-keypad.c +++ b/drivers/input/keyboard/samsung-keypad.c @@ -21,6 +21,8 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/slab.h> +#include <linux/of.h> +#include <linux/of_gpio.h> #include <linux/sched.h> #include <plat/keypad.h> @@ -68,31 +70,26 @@ struct samsung_keypad { wait_queue_head_t wait; bool stopped; int irq; + enum samsung_keypad_type type; unsigned int row_shift; unsigned int rows; unsigned int cols; unsigned int row_state[SAMSUNG_MAX_COLS]; +#ifdef CONFIG_OF + int row_gpios[SAMSUNG_MAX_ROWS]; + int col_gpios[SAMSUNG_MAX_COLS]; +#endif unsigned short keycodes[]; }; -static int samsung_keypad_is_s5pv210(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - enum samsung_keypad_type type = - platform_get_device_id(pdev)->driver_data; - - return type == KEYPAD_TYPE_S5PV210; -} - static void samsung_keypad_scan(struct samsung_keypad *keypad, unsigned int *row_state) { - struct device *dev = keypad->input_dev->dev.parent; unsigned int col; unsigned int val; for (col = 0; col < keypad->cols; col++) { - if (samsung_keypad_is_s5pv210(dev)) { + if (keypad->type == KEYPAD_TYPE_S5PV210) { val = S5PV210_KEYIFCOLEN_MASK; val &= ~(1 << col) << 8; } else { @@ -235,6 +232,126 @@ static void samsung_keypad_close(struct input_dev *input_dev) samsung_keypad_stop(keypad); } +#ifdef CONFIG_OF +static struct samsung_keypad_platdata *samsung_keypad_parse_dt( + struct device *dev) +{ + struct samsung_keypad_platdata *pdata; + struct matrix_keymap_data *keymap_data; + uint32_t *keymap, num_rows = 0, num_cols = 0; + struct device_node *np = dev->of_node, *key_np; + unsigned int key_count = 0; + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(dev, "could not allocate memory for platform data\n"); + return NULL; + } + + of_property_read_u32(np, "samsung,keypad-num-rows", &num_rows); + of_property_read_u32(np, "samsung,keypad-num-columns", &num_cols); + if (!num_rows || !num_cols) { + dev_err(dev, "number of keypad rows/columns not specified\n"); + return NULL; + } + pdata->rows = num_rows; + pdata->cols = num_cols; + + keymap_data = devm_kzalloc(dev, sizeof(*keymap_data), GFP_KERNEL); + if (!keymap_data) { + dev_err(dev, "could not allocate memory for keymap data\n"); + return NULL; + } + pdata->keymap_data = keymap_data; + + for_each_child_of_node(np, key_np) + key_count++; + + keymap_data->keymap_size = key_count; + keymap = devm_kzalloc(dev, sizeof(uint32_t) * key_count, GFP_KERNEL); + if (!keymap) { + dev_err(dev, "could not allocate memory for keymap\n"); + return NULL; + } + keymap_data->keymap = keymap; + + for_each_child_of_node(np, key_np) { + u32 row, col, key_code; + of_property_read_u32(key_np, "keypad,row", &row); + of_property_read_u32(key_np, "keypad,column", &col); + of_property_read_u32(key_np, "linux,code", &key_code); + *keymap++ = KEY(row, col, key_code); + } + + if (of_get_property(np, "linux,input-no-autorepeat", NULL)) + pdata->no_autorepeat = true; + if (of_get_property(np, "linux,input-wakeup", NULL)) + pdata->wakeup = true; + + return pdata; +} + +static void samsung_keypad_parse_dt_gpio(struct device *dev, + struct samsung_keypad *keypad) +{ + struct device_node *np = dev->of_node; + int gpio, ret, row, col; + + for (row = 0; row < keypad->rows; row++) { + gpio = of_get_named_gpio(np, "row-gpios", row); + keypad->row_gpios[row] = gpio; + if (!gpio_is_valid(gpio)) { + dev_err(dev, "keypad row[%d]: invalid gpio %d\n", + row, gpio); + continue; + } + + ret = gpio_request(gpio, "keypad-row"); + if (ret) + dev_err(dev, "keypad row[%d] gpio request failed\n", + row); + } + + for (col = 0; col < keypad->cols; col++) { + gpio = of_get_named_gpio(np, "col-gpios", col); + keypad->col_gpios[col] = gpio; + if (!gpio_is_valid(gpio)) { + dev_err(dev, "keypad column[%d]: invalid gpio %d\n", + col, gpio); + continue; + } + + ret = gpio_request(gpio, "keypad-col"); + if (ret) + dev_err(dev, "keypad column[%d] gpio request failed\n", + col); + } +} + +static void samsung_keypad_dt_gpio_free(struct samsung_keypad *keypad) +{ + int cnt; + + for (cnt = 0; cnt < keypad->rows; cnt++) + if (gpio_is_valid(keypad->row_gpios[cnt])) + gpio_free(keypad->row_gpios[cnt]); + + for (cnt = 0; cnt < keypad->cols; cnt++) + if (gpio_is_valid(keypad->col_gpios[cnt])) + gpio_free(keypad->col_gpios[cnt]); +} +#else +static +struct samsung_keypad_platdata *samsung_keypad_parse_dt(struct device *dev) +{ + return NULL; +} + +static void samsung_keypad_dt_gpio_free(struct samsung_keypad *keypad) +{ +} +#endif + static int __devinit samsung_keypad_probe(struct platform_device *pdev) { const struct samsung_keypad_platdata *pdata; @@ -246,7 +363,10 @@ static int __devinit samsung_keypad_probe(struct platform_device *pdev) unsigned int keymap_size; int error; - pdata = pdev->dev.platform_data; + if (pdev->dev.of_node) + pdata = samsung_keypad_parse_dt(&pdev->dev); + else + pdata = pdev->dev.platform_data; if (!pdata) { dev_err(&pdev->dev, "no platform data defined\n"); return -EINVAL; @@ -303,6 +423,16 @@ static int __devinit samsung_keypad_probe(struct platform_device *pdev) keypad->cols = pdata->cols; init_waitqueue_head(&keypad->wait); + if (pdev->dev.of_node) { +#ifdef CONFIG_OF + samsung_keypad_parse_dt_gpio(&pdev->dev, keypad); + keypad->type = of_device_is_compatible(pdev->dev.of_node, + "samsung,s5pv210-keypad"); +#endif + } else { + keypad->type = platform_get_device_id(pdev)->driver_data; + } + input_dev->name = pdev->name; input_dev->id.bustype = BUS_HOST; input_dev->dev.parent = &pdev->dev; @@ -343,12 +473,19 @@ static int __devinit samsung_keypad_probe(struct platform_device *pdev) device_init_wakeup(&pdev->dev, pdata->wakeup); platform_set_drvdata(pdev, keypad); + + if (pdev->dev.of_node) { + devm_kfree(&pdev->dev, (void *)pdata->keymap_data->keymap); + devm_kfree(&pdev->dev, (void *)pdata->keymap_data); + devm_kfree(&pdev->dev, (void *)pdata); + } return 0; err_free_irq: free_irq(keypad->irq, keypad); err_put_clk: clk_put(keypad->clk); + samsung_keypad_dt_gpio_free(keypad); err_unmap_base: iounmap(keypad->base); err_free_mem: @@ -374,6 +511,7 @@ static int __devexit samsung_keypad_remove(struct platform_device *pdev) free_irq(keypad->irq, keypad); clk_put(keypad->clk); + samsung_keypad_dt_gpio_free(keypad); iounmap(keypad->base); kfree(keypad); @@ -447,6 +585,17 @@ static const struct dev_pm_ops samsung_keypad_pm_ops = { }; #endif +#ifdef CONFIG_OF +static const struct of_device_id samsung_keypad_dt_match[] = { + { .compatible = "samsung,s3c6410-keypad" }, + { .compatible = "samsung,s5pv210-keypad" }, + {}, +}; +MODULE_DEVICE_TABLE(of, samsung_keypad_dt_match); +#else +#define samsung_keypad_dt_match NULL +#endif + static struct platform_device_id samsung_keypad_driver_ids[] = { { .name = "samsung-keypad", @@ -465,6 +614,7 @@ static struct platform_driver samsung_keypad_driver = { .driver = { .name = "samsung-keypad", .owner = THIS_MODULE, + .of_match_table = samsung_keypad_dt_match, #ifdef CONFIG_PM .pm = &samsung_keypad_pm_ops, #endif diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c index c5b12d2e955a..86d6f39178b0 100644 --- a/drivers/input/mouse/sentelic.c +++ b/drivers/input/mouse/sentelic.c @@ -2,7 +2,7 @@ * Finger Sensing Pad PS/2 mouse driver. * * Copyright (C) 2005-2007 Asia Vital Components Co., Ltd. - * Copyright (C) 2005-2010 Tai-hwa Liang, Sentelic Corporation. + * Copyright (C) 2005-2011 Tai-hwa Liang, Sentelic Corporation. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -162,7 +162,7 @@ static int fsp_reg_write(struct psmouse *psmouse, int reg_addr, int reg_val) ps2_sendbyte(ps2dev, v, FSP_CMD_TIMEOUT2); if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0) - return -1; + goto out; if ((v = fsp_test_invert_cmd(reg_val)) != reg_val) { /* inversion is required */ @@ -261,7 +261,7 @@ static int fsp_page_reg_write(struct psmouse *psmouse, int reg_val) ps2_sendbyte(ps2dev, 0x88, FSP_CMD_TIMEOUT2); if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0) - return -1; + goto out; if ((v = fsp_test_invert_cmd(reg_val)) != reg_val) { ps2_sendbyte(ps2dev, 0x47, FSP_CMD_TIMEOUT2); @@ -309,7 +309,7 @@ static int fsp_get_buttons(struct psmouse *psmouse, int *btn) }; int val; - if (fsp_reg_read(psmouse, FSP_REG_TMOD_STATUS1, &val) == -1) + if (fsp_reg_read(psmouse, FSP_REG_TMOD_STATUS, &val) == -1) return -EIO; *btn = buttons[(val & 0x30) >> 4]; diff --git a/drivers/input/mouse/sentelic.h b/drivers/input/mouse/sentelic.h index ed1395ac7b8b..2e4af24f8c15 100644 --- a/drivers/input/mouse/sentelic.h +++ b/drivers/input/mouse/sentelic.h @@ -2,7 +2,7 @@ * Finger Sensing Pad PS/2 mouse driver. * * Copyright (C) 2005-2007 Asia Vital Components Co., Ltd. - * Copyright (C) 2005-2009 Tai-hwa Liang, Sentelic Corporation. + * Copyright (C) 2005-2011 Tai-hwa Liang, Sentelic Corporation. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -33,6 +33,7 @@ /* Finger-sensing Pad control registers */ #define FSP_REG_SYSCTL1 0x10 #define FSP_BIT_EN_REG_CLK BIT(5) +#define FSP_REG_TMOD_STATUS 0x20 #define FSP_REG_OPC_QDOWN 0x31 #define FSP_BIT_EN_OPC_TAG BIT(7) #define FSP_REG_OPTZ_XLO 0x34 diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c index 2fb2963df553..5b5fa5cdaa31 100644 --- a/drivers/iommu/iommu.c +++ b/drivers/iommu/iommu.c @@ -90,7 +90,7 @@ struct iommu_domain *iommu_domain_alloc(struct bus_type *bus) if (bus == NULL || bus->iommu_ops == NULL) return NULL; - domain = kmalloc(sizeof(*domain), GFP_KERNEL); + domain = kzalloc(sizeof(*domain), GFP_KERNEL); if (!domain) return NULL; diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 881e04c7ffe6..2ca10dfec91f 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -838,13 +838,13 @@ static int gspca_init_transfer(struct gspca_dev *gspca_dev) gspca_dev->usb_err = 0; /* do the specific subdriver stuff before endpoint selection */ - gspca_dev->alt = 0; + intf = usb_ifnum_to_if(gspca_dev->dev, gspca_dev->iface); + gspca_dev->alt = gspca_dev->cam.bulk ? intf->num_altsetting : 0; if (gspca_dev->sd_desc->isoc_init) { ret = gspca_dev->sd_desc->isoc_init(gspca_dev); if (ret < 0) goto unlock; } - intf = usb_ifnum_to_if(gspca_dev->dev, gspca_dev->iface); xfer = gspca_dev->cam.bulk ? USB_ENDPOINT_XFER_BULK : USB_ENDPOINT_XFER_ISOC; @@ -957,7 +957,7 @@ retry: ret = -EIO; goto out; } - alt = ep_tb[--alt_idx].alt; + gspca_dev->alt = ep_tb[--alt_idx].alt; } } out: diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 50b5f9926f64..0726e59fd418 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -675,7 +675,8 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data, unsigned int status) { /* First check for errors */ - if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|MCI_RXOVERRUN)) { + if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_STARTBITERR| + MCI_TXUNDERRUN|MCI_RXOVERRUN)) { u32 remain, success; /* Terminate the DMA transfer */ @@ -754,8 +755,12 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd, } if (!cmd->data || cmd->error) { - if (host->data) + if (host->data) { + /* Terminate the DMA transfer */ + if (dma_inprogress(host)) + mmci_dma_data_error(host); mmci_stop_data(host); + } mmci_request_end(host, cmd->mrq); } else if (!(cmd->data->flags & MMC_DATA_READ)) { mmci_start_data(host, cmd->data); @@ -955,8 +960,9 @@ static irqreturn_t mmci_irq(int irq, void *dev_id) dev_dbg(mmc_dev(host->mmc), "irq0 (data+cmd) %08x\n", status); data = host->data; - if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN| - MCI_RXOVERRUN|MCI_DATAEND|MCI_DATABLOCKEND) && data) + if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_STARTBITERR| + MCI_TXUNDERRUN|MCI_RXOVERRUN|MCI_DATAEND| + MCI_DATABLOCKEND) && data) mmci_data_irq(host, data, status); cmd = host->cmd; diff --git a/drivers/net/ethernet/marvell/skge.c b/drivers/net/ethernet/marvell/skge.c index c7b60839ac99..dea0cb4400e2 100644 --- a/drivers/net/ethernet/marvell/skge.c +++ b/drivers/net/ethernet/marvell/skge.c @@ -2606,6 +2606,9 @@ static int skge_up(struct net_device *dev) spin_unlock_irq(&hw->hw_lock); napi_enable(&skge->napi); + + skge_set_multicast(dev); + return 0; free_tx_ring: diff --git a/drivers/net/ethernet/mellanox/mlx4/en_cq.c b/drivers/net/ethernet/mellanox/mlx4/en_cq.c index 227997d775e8..5829e0b47e7e 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_cq.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_cq.c @@ -147,6 +147,7 @@ void mlx4_en_destroy_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq) mlx4_free_hwq_res(mdev->dev, &cq->wqres, cq->buf_size); if (priv->mdev->dev->caps.comp_pool && cq->vector) mlx4_release_eq(priv->mdev->dev, cq->vector); + cq->vector = 0; cq->buf_size = 0; cq->buf = NULL; } diff --git a/drivers/of/platform.c b/drivers/of/platform.c index cbd5d701c7e0..63b3ec48c203 100644 --- a/drivers/of/platform.c +++ b/drivers/of/platform.c @@ -314,7 +314,7 @@ static const struct of_dev_auxdata *of_dev_lookup(const struct of_dev_auxdata *l if (!lookup) return NULL; - for(; lookup->name != NULL; lookup++) { + for(; lookup->compatible != NULL; lookup++) { if (!of_device_is_compatible(np, lookup->compatible)) continue; if (of_address_to_resource(np, 0, &res)) diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c index 5b979d9cc332..175067a17c46 100644 --- a/drivers/rtc/rtc-s3c.c +++ b/drivers/rtc/rtc-s3c.c @@ -25,6 +25,7 @@ #include <linux/clk.h> #include <linux/log2.h> #include <linux/slab.h> +#include <linux/of.h> #include <mach/hardware.h> #include <asm/uaccess.h> @@ -507,7 +508,13 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev) goto err_nortc; } - s3c_rtc_cpu_type = platform_get_device_id(pdev)->driver_data; +#ifdef CONFIG_OF + if (pdev->dev.of_node) + s3c_rtc_cpu_type = of_device_is_compatible(pdev->dev.of_node, + "samsung,s3c6410-rtc") ? TYPE_S3C64XX : TYPE_S3C2410; + else +#endif + s3c_rtc_cpu_type = platform_get_device_id(pdev)->driver_data; /* Check RTC Time */ @@ -629,6 +636,17 @@ static int s3c_rtc_resume(struct platform_device *pdev) #define s3c_rtc_resume NULL #endif +#ifdef CONFIG_OF +static const struct of_device_id s3c_rtc_dt_match[] = { + { .compatible = "samsung,s3c2410-rtc" }, + { .compatible = "samsung,s3c6410-rtc" }, + {}, +}; +MODULE_DEVICE_TABLE(of, s3c_rtc_dt_match); +#else +#define s3c_rtc_dt_match NULL +#endif + static struct platform_device_id s3c_rtc_driver_ids[] = { { .name = "s3c2410-rtc", @@ -651,6 +669,7 @@ static struct platform_driver s3c_rtc_driver = { .driver = { .name = "s3c-rtc", .owner = THIS_MODULE, + .of_match_table = s3c_rtc_dt_match, }, }; diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 925a1e547a83..fb89b85d0d81 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -457,7 +457,7 @@ config SERIAL_SAMSUNG config SERIAL_SAMSUNG_UARTS_4 bool depends on ARM && PLAT_SAMSUNG - default y if CPU_S3C2443 + default y if !(CPU_S3C2410 || SERIAL_S3C2412 || CPU_S3C2440 || CPU_S3C2442) help Internal node for the common case of 4 Samsung compatible UARTs @@ -465,7 +465,7 @@ config SERIAL_SAMSUNG_UARTS int depends on ARM && PLAT_SAMSUNG default 6 if ARCH_S5P6450 - default 4 if SERIAL_SAMSUNG_UARTS_4 + default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416 default 3 help Select the number of available UART ports for the Samsung S3C @@ -495,47 +495,6 @@ config SERIAL_SAMSUNG_CONSOLE your boot loader about how to pass options to the kernel at boot time.) -config SERIAL_S3C2410 - tristate "Samsung S3C2410 Serial port support" - depends on SERIAL_SAMSUNG && CPU_S3C2410 - default y if CPU_S3C2410 - help - Serial port support for the Samsung S3C2410 SoC - -config SERIAL_S3C2412 - tristate "Samsung S3C2412/S3C2413 Serial port support" - depends on SERIAL_SAMSUNG && CPU_S3C2412 - default y if CPU_S3C2412 - help - Serial port support for the Samsung S3C2412 and S3C2413 SoC - -config SERIAL_S3C2440 - tristate "Samsung S3C2440/S3C2442/S3C2416 Serial port support" - depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442 || CPU_S3C2416) - default y if CPU_S3C2440 - default y if CPU_S3C2442 - select SERIAL_SAMSUNG_UARTS_4 if CPU_S3C2416 - help - Serial port support for the Samsung S3C2440, S3C2416 and S3C2442 SoC - -config SERIAL_S3C6400 - tristate "Samsung S3C6400/S3C6410/S5P6440/S5P6450/S5PC100 Serial port support" - depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5P6450 || CPU_S5PC100) - select SERIAL_SAMSUNG_UARTS_4 - default y - help - Serial port support for the Samsung S3C6400, S3C6410, S5P6440, S5P6450 - and S5PC100 SoCs - -config SERIAL_S5PV210 - tristate "Samsung S5PV210 Serial port support" - depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_EXYNOS4210 || SOC_EXYNOS4212) - select SERIAL_SAMSUNG_UARTS_4 if (CPU_S5PV210 || CPU_EXYNOS4210 || SOC_EXYNOS4212) - default y - help - Serial port support for Samsung's S5P Family of SoC's - - config SERIAL_MAX3100 tristate "MAX3100 support" depends on SPI diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index e10cf5b54b6d..84bc2e5a57be 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -39,11 +39,6 @@ obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o obj-$(CONFIG_SERIAL_BFIN) += bfin_uart.o obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o -obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o -obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o -obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o -obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o -obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o obj-$(CONFIG_SERIAL_MAX3100) += max3100.o obj-$(CONFIG_SERIAL_MAX3107) += max3107.o obj-$(CONFIG_SERIAL_MAX3107_AAVA) += max3107-aava.o diff --git a/drivers/tty/serial/s3c2410.c b/drivers/tty/serial/s3c2410.c deleted file mode 100644 index b1d7e7c1849d..000000000000 --- a/drivers/tty/serial/s3c2410.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * Driver for Samsung S3C2410 SoC onboard UARTs. - * - * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/ioport.h> -#include <linux/io.h> -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial.h> - -#include <asm/irq.h> -#include <mach/hardware.h> - -#include <plat/regs-serial.h> -#include <mach/regs-gpio.h> - -#include "samsung.h" - -static int s3c2410_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - if (strcmp(clk->name, "uclk") == 0) - ucon |= S3C2410_UCON_UCLK; - else - ucon &= ~S3C2410_UCON_UCLK; - - wr_regl(port, S3C2410_UCON, ucon); - return 0; -} - -static int s3c2410_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - clk->divisor = 1; - clk->name = (ucon & S3C2410_UCON_UCLK) ? "uclk" : "pclk"; - - return 0; -} - -static int s3c2410_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - dbg("s3c2410_serial_resetport: port=%p (%08lx), cfg=%p\n", - port, port->mapbase, cfg); - - wr_regl(port, S3C2410_UCON, cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - return 0; -} - -static struct s3c24xx_uart_info s3c2410_uart_inf = { - .name = "Samsung S3C2410 UART", - .type = PORT_S3C2410, - .fifosize = 16, - .rx_fifomask = S3C2410_UFSTAT_RXMASK, - .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT, - .rx_fifofull = S3C2410_UFSTAT_RXFULL, - .tx_fifofull = S3C2410_UFSTAT_TXFULL, - .tx_fifomask = S3C2410_UFSTAT_TXMASK, - .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT, - .get_clksrc = s3c2410_serial_getsource, - .set_clksrc = s3c2410_serial_setsource, - .reset_port = s3c2410_serial_resetport, -}; - -static int s3c2410_serial_probe(struct platform_device *dev) -{ - return s3c24xx_serial_probe(dev, &s3c2410_uart_inf); -} - -static struct platform_driver s3c2410_serial_driver = { - .probe = s3c2410_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s3c2410-uart", - .owner = THIS_MODULE, - }, -}; - -static int __init s3c2410_serial_init(void) -{ - return s3c24xx_serial_init(&s3c2410_serial_driver, &s3c2410_uart_inf); -} - -static void __exit s3c2410_serial_exit(void) -{ - platform_driver_unregister(&s3c2410_serial_driver); -} - -module_init(s3c2410_serial_init); -module_exit(s3c2410_serial_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); -MODULE_DESCRIPTION("Samsung S3C2410 SoC Serial port driver"); -MODULE_ALIAS("platform:s3c2410-uart"); diff --git a/drivers/tty/serial/s3c2412.c b/drivers/tty/serial/s3c2412.c deleted file mode 100644 index 2234bf9ced45..000000000000 --- a/drivers/tty/serial/s3c2412.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * Driver for Samsung S3C2412 and S3C2413 SoC onboard UARTs. - * - * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/ioport.h> -#include <linux/io.h> -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial.h> - -#include <asm/irq.h> -#include <mach/hardware.h> - -#include <plat/regs-serial.h> -#include <mach/regs-gpio.h> - -#include "samsung.h" - -static int s3c2412_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - ucon &= ~S3C2412_UCON_CLKMASK; - - if (strcmp(clk->name, "uclk") == 0) - ucon |= S3C2440_UCON_UCLK; - else if (strcmp(clk->name, "pclk") == 0) - ucon |= S3C2440_UCON_PCLK; - else if (strcmp(clk->name, "usysclk") == 0) - ucon |= S3C2412_UCON_USYSCLK; - else { - printk(KERN_ERR "unknown clock source %s\n", clk->name); - return -EINVAL; - } - - wr_regl(port, S3C2410_UCON, ucon); - return 0; -} - - -static int s3c2412_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - switch (ucon & S3C2412_UCON_CLKMASK) { - case S3C2412_UCON_UCLK: - clk->divisor = 1; - clk->name = "uclk"; - break; - - case S3C2412_UCON_PCLK: - case S3C2412_UCON_PCLK2: - clk->divisor = 1; - clk->name = "pclk"; - break; - - case S3C2412_UCON_USYSCLK: - clk->divisor = 1; - clk->name = "usysclk"; - break; - } - - return 0; -} - -static int s3c2412_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - dbg("%s: port=%p (%08lx), cfg=%p\n", - __func__, port, port->mapbase, cfg); - - /* ensure we don't change the clock settings... */ - - ucon &= S3C2412_UCON_CLKMASK; - - wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - return 0; -} - -static struct s3c24xx_uart_info s3c2412_uart_inf = { - .name = "Samsung S3C2412 UART", - .type = PORT_S3C2412, - .fifosize = 64, - .has_divslot = 1, - .rx_fifomask = S3C2440_UFSTAT_RXMASK, - .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, - .rx_fifofull = S3C2440_UFSTAT_RXFULL, - .tx_fifofull = S3C2440_UFSTAT_TXFULL, - .tx_fifomask = S3C2440_UFSTAT_TXMASK, - .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, - .get_clksrc = s3c2412_serial_getsource, - .set_clksrc = s3c2412_serial_setsource, - .reset_port = s3c2412_serial_resetport, -}; - -/* device management */ - -static int s3c2412_serial_probe(struct platform_device *dev) -{ - dbg("s3c2440_serial_probe: dev=%p\n", dev); - return s3c24xx_serial_probe(dev, &s3c2412_uart_inf); -} - -static struct platform_driver s3c2412_serial_driver = { - .probe = s3c2412_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s3c2412-uart", - .owner = THIS_MODULE, - }, -}; - -static inline int s3c2412_serial_init(void) -{ - return s3c24xx_serial_init(&s3c2412_serial_driver, &s3c2412_uart_inf); -} - -static inline void s3c2412_serial_exit(void) -{ - platform_driver_unregister(&s3c2412_serial_driver); -} - -module_init(s3c2412_serial_init); -module_exit(s3c2412_serial_exit); - -MODULE_DESCRIPTION("Samsung S3C2412,S3C2413 SoC Serial port driver"); -MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:s3c2412-uart"); diff --git a/drivers/tty/serial/s3c2440.c b/drivers/tty/serial/s3c2440.c deleted file mode 100644 index 1d0c324b813f..000000000000 --- a/drivers/tty/serial/s3c2440.c +++ /dev/null @@ -1,178 +0,0 @@ -/* - * Driver for Samsung S3C2440 and S3C2442 SoC onboard UARTs. - * - * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/ioport.h> -#include <linux/io.h> -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial.h> - -#include <asm/irq.h> -#include <mach/hardware.h> - -#include <plat/regs-serial.h> -#include <mach/regs-gpio.h> - -#include "samsung.h" - - -static int s3c2440_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - /* todo - proper fclk<>nonfclk switch. */ - - ucon &= ~S3C2440_UCON_CLKMASK; - - if (strcmp(clk->name, "uclk") == 0) - ucon |= S3C2440_UCON_UCLK; - else if (strcmp(clk->name, "pclk") == 0) - ucon |= S3C2440_UCON_PCLK; - else if (strcmp(clk->name, "fclk") == 0) - ucon |= S3C2440_UCON_FCLK; - else { - printk(KERN_ERR "unknown clock source %s\n", clk->name); - return -EINVAL; - } - - wr_regl(port, S3C2410_UCON, ucon); - return 0; -} - - -static int s3c2440_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - unsigned long ucon0, ucon1, ucon2; - - switch (ucon & S3C2440_UCON_CLKMASK) { - case S3C2440_UCON_UCLK: - clk->divisor = 1; - clk->name = "uclk"; - break; - - case S3C2440_UCON_PCLK: - case S3C2440_UCON_PCLK2: - clk->divisor = 1; - clk->name = "pclk"; - break; - - case S3C2440_UCON_FCLK: - /* the fun of calculating the uart divisors on - * the s3c2440 */ - - ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON); - ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON); - ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON); - - printk("ucons: %08lx, %08lx, %08lx\n", ucon0, ucon1, ucon2); - - ucon0 &= S3C2440_UCON0_DIVMASK; - ucon1 &= S3C2440_UCON1_DIVMASK; - ucon2 &= S3C2440_UCON2_DIVMASK; - - if (ucon0 != 0) { - clk->divisor = ucon0 >> S3C2440_UCON_DIVSHIFT; - clk->divisor += 6; - } else if (ucon1 != 0) { - clk->divisor = ucon1 >> S3C2440_UCON_DIVSHIFT; - clk->divisor += 21; - } else if (ucon2 != 0) { - clk->divisor = ucon2 >> S3C2440_UCON_DIVSHIFT; - clk->divisor += 36; - } else { - /* manual calims 44, seems to be 9 */ - clk->divisor = 9; - } - - clk->name = "fclk"; - break; - } - - return 0; -} - -static int s3c2440_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - dbg("s3c2440_serial_resetport: port=%p (%08lx), cfg=%p\n", - port, port->mapbase, cfg); - - /* ensure we don't change the clock settings... */ - - ucon &= (S3C2440_UCON0_DIVMASK | (3<<10)); - - wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - return 0; -} - -static struct s3c24xx_uart_info s3c2440_uart_inf = { - .name = "Samsung S3C2440 UART", - .type = PORT_S3C2440, - .fifosize = 64, - .rx_fifomask = S3C2440_UFSTAT_RXMASK, - .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, - .rx_fifofull = S3C2440_UFSTAT_RXFULL, - .tx_fifofull = S3C2440_UFSTAT_TXFULL, - .tx_fifomask = S3C2440_UFSTAT_TXMASK, - .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, - .get_clksrc = s3c2440_serial_getsource, - .set_clksrc = s3c2440_serial_setsource, - .reset_port = s3c2440_serial_resetport, -}; - -/* device management */ - -static int s3c2440_serial_probe(struct platform_device *dev) -{ - dbg("s3c2440_serial_probe: dev=%p\n", dev); - return s3c24xx_serial_probe(dev, &s3c2440_uart_inf); -} - -static struct platform_driver s3c2440_serial_driver = { - .probe = s3c2440_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s3c2440-uart", - .owner = THIS_MODULE, - }, -}; - -static int __init s3c2440_serial_init(void) -{ - return s3c24xx_serial_init(&s3c2440_serial_driver, &s3c2440_uart_inf); -} - -static void __exit s3c2440_serial_exit(void) -{ - platform_driver_unregister(&s3c2440_serial_driver); -} - -module_init(s3c2440_serial_init); -module_exit(s3c2440_serial_exit); - -MODULE_DESCRIPTION("Samsung S3C2440,S3C2442 SoC Serial port driver"); -MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:s3c2440-uart"); diff --git a/drivers/tty/serial/s3c6400.c b/drivers/tty/serial/s3c6400.c deleted file mode 100644 index e2f6913d84d5..000000000000 --- a/drivers/tty/serial/s3c6400.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * Driver for Samsung S3C6400 and S3C6410 SoC onboard UARTs. - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/ioport.h> -#include <linux/io.h> -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial.h> - -#include <asm/irq.h> -#include <mach/hardware.h> - -#include <plat/regs-serial.h> - -#include "samsung.h" - -static int s3c6400_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - if (strcmp(clk->name, "uclk0") == 0) { - ucon &= ~S3C6400_UCON_CLKMASK; - ucon |= S3C6400_UCON_UCLK0; - } else if (strcmp(clk->name, "uclk1") == 0) - ucon |= S3C6400_UCON_UCLK1; - else if (strcmp(clk->name, "pclk") == 0) { - /* See notes about transitioning from UCLK to PCLK */ - ucon &= ~S3C6400_UCON_UCLK0; - } else { - printk(KERN_ERR "unknown clock source %s\n", clk->name); - return -EINVAL; - } - - wr_regl(port, S3C2410_UCON, ucon); - return 0; -} - - -static int s3c6400_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - u32 ucon = rd_regl(port, S3C2410_UCON); - - clk->divisor = 1; - - switch (ucon & S3C6400_UCON_CLKMASK) { - case S3C6400_UCON_UCLK0: - clk->name = "uclk0"; - break; - - case S3C6400_UCON_UCLK1: - clk->name = "uclk1"; - break; - - case S3C6400_UCON_PCLK: - case S3C6400_UCON_PCLK2: - clk->name = "pclk"; - break; - } - - return 0; -} - -static int s3c6400_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - dbg("s3c6400_serial_resetport: port=%p (%08lx), cfg=%p\n", - port, port->mapbase, cfg); - - /* ensure we don't change the clock settings... */ - - ucon &= S3C6400_UCON_CLKMASK; - - wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - return 0; -} - -static struct s3c24xx_uart_info s3c6400_uart_inf = { - .name = "Samsung S3C6400 UART", - .type = PORT_S3C6400, - .fifosize = 64, - .has_divslot = 1, - .rx_fifomask = S3C2440_UFSTAT_RXMASK, - .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, - .rx_fifofull = S3C2440_UFSTAT_RXFULL, - .tx_fifofull = S3C2440_UFSTAT_TXFULL, - .tx_fifomask = S3C2440_UFSTAT_TXMASK, - .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, - .get_clksrc = s3c6400_serial_getsource, - .set_clksrc = s3c6400_serial_setsource, - .reset_port = s3c6400_serial_resetport, -}; - -/* device management */ - -static int s3c6400_serial_probe(struct platform_device *dev) -{ - dbg("s3c6400_serial_probe: dev=%p\n", dev); - return s3c24xx_serial_probe(dev, &s3c6400_uart_inf); -} - -static struct platform_driver s3c6400_serial_driver = { - .probe = s3c6400_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s3c6400-uart", - .owner = THIS_MODULE, - }, -}; - -static int __init s3c6400_serial_init(void) -{ - return s3c24xx_serial_init(&s3c6400_serial_driver, &s3c6400_uart_inf); -} - -static void __exit s3c6400_serial_exit(void) -{ - platform_driver_unregister(&s3c6400_serial_driver); -} - -module_init(s3c6400_serial_init); -module_exit(s3c6400_serial_exit); - -MODULE_DESCRIPTION("Samsung S3C6400,S3C6410 SoC Serial port driver"); -MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:s3c6400-uart"); diff --git a/drivers/tty/serial/s5pv210.c b/drivers/tty/serial/s5pv210.c deleted file mode 100644 index 8b0b888a1b76..000000000000 --- a/drivers/tty/serial/s5pv210.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on drivers/serial/s3c6400.c - * - * Driver for Samsung S5PV210 SoC UARTs. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/ioport.h> -#include <linux/io.h> -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial.h> -#include <linux/delay.h> - -#include <asm/irq.h> -#include <mach/hardware.h> -#include <plat/regs-serial.h> -#include "samsung.h" - -static int s5pv210_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - struct s3c2410_uartcfg *cfg = port->dev->platform_data; - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - if (cfg->flags & NO_NEED_CHECK_CLKSRC) - return 0; - - if (strcmp(clk->name, "pclk") == 0) - ucon &= ~S5PV210_UCON_CLKMASK; - else if (strcmp(clk->name, "uclk1") == 0) - ucon |= S5PV210_UCON_CLKMASK; - else { - printk(KERN_ERR "unknown clock source %s\n", clk->name); - return -EINVAL; - } - - wr_regl(port, S3C2410_UCON, ucon); - return 0; -} - - -static int s5pv210_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - struct s3c2410_uartcfg *cfg = port->dev->platform_data; - u32 ucon = rd_regl(port, S3C2410_UCON); - - clk->divisor = 1; - - if (cfg->flags & NO_NEED_CHECK_CLKSRC) - return 0; - - switch (ucon & S5PV210_UCON_CLKMASK) { - case S5PV210_UCON_PCLK: - clk->name = "pclk"; - break; - case S5PV210_UCON_UCLK: - clk->name = "uclk1"; - break; - } - - return 0; -} - -static int s5pv210_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - ucon &= S5PV210_UCON_CLKMASK; - wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - /* It is need to delay When reset FIFO register */ - udelay(1); - - return 0; -} - -#define S5PV210_UART_DEFAULT_INFO(fifo_size) \ - .name = "Samsung S5PV210 UART0", \ - .type = PORT_S3C6400, \ - .fifosize = fifo_size, \ - .has_divslot = 1, \ - .rx_fifomask = S5PV210_UFSTAT_RXMASK, \ - .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, \ - .rx_fifofull = S5PV210_UFSTAT_RXFULL, \ - .tx_fifofull = S5PV210_UFSTAT_TXFULL, \ - .tx_fifomask = S5PV210_UFSTAT_TXMASK, \ - .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, \ - .get_clksrc = s5pv210_serial_getsource, \ - .set_clksrc = s5pv210_serial_setsource, \ - .reset_port = s5pv210_serial_resetport - -static struct s3c24xx_uart_info s5p_port_fifo256 = { - S5PV210_UART_DEFAULT_INFO(256), -}; - -static struct s3c24xx_uart_info s5p_port_fifo64 = { - S5PV210_UART_DEFAULT_INFO(64), -}; - -static struct s3c24xx_uart_info s5p_port_fifo16 = { - S5PV210_UART_DEFAULT_INFO(16), -}; - -static struct s3c24xx_uart_info *s5p_uart_inf[] = { - [0] = &s5p_port_fifo256, - [1] = &s5p_port_fifo64, - [2] = &s5p_port_fifo16, - [3] = &s5p_port_fifo16, -}; - -/* device management */ -static int s5p_serial_probe(struct platform_device *pdev) -{ - return s3c24xx_serial_probe(pdev, s5p_uart_inf[pdev->id]); -} - -static struct platform_driver s5p_serial_driver = { - .probe = s5p_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s5pv210-uart", - .owner = THIS_MODULE, - }, -}; - -static int __init s5p_serial_init(void) -{ - return s3c24xx_serial_init(&s5p_serial_driver, *s5p_uart_inf); -} - -static void __exit s5p_serial_exit(void) -{ - platform_driver_unregister(&s5p_serial_driver); -} - -module_init(s5p_serial_init); -module_exit(s5p_serial_exit); - -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:s5pv210-uart"); -MODULE_DESCRIPTION("Samsung S5PV210 UART Driver support"); -MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>"); diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index b31f1c3a2c4c..f96f37b5fec6 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -42,6 +42,7 @@ #include <linux/delay.h> #include <linux/clk.h> #include <linux/cpufreq.h> +#include <linux/of.h> #include <asm/irq.h> @@ -49,6 +50,7 @@ #include <mach/map.h> #include <plat/regs-serial.h> +#include <plat/clock.h> #include "samsung.h" @@ -190,10 +192,13 @@ static inline struct s3c24xx_uart_info *s3c24xx_port_to_info(struct uart_port *p static inline struct s3c2410_uartcfg *s3c24xx_port_to_cfg(struct uart_port *port) { + struct s3c24xx_uart_port *ourport; + if (port->dev == NULL) return NULL; - return (struct s3c2410_uartcfg *)port->dev->platform_data; + ourport = container_of(port, struct s3c24xx_uart_port, port); + return ourport->cfg; } static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport, @@ -202,7 +207,7 @@ static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport, struct s3c24xx_uart_info *info = ourport->info; if (ufstat & info->rx_fifofull) - return info->fifosize; + return ourport->port.fifosize; return (ufstat & info->rx_fifomask) >> info->rx_fifoshift; } @@ -555,154 +560,98 @@ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level, * */ +#define MAX_CLK_NAME_LENGTH 15 -#define MAX_CLKS (8) - -static struct s3c24xx_uart_clksrc tmp_clksrc = { - .name = "pclk", - .min_baud = 0, - .max_baud = 0, - .divisor = 1, -}; - -static inline int -s3c24xx_serial_getsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c) +static inline int s3c24xx_serial_getsource(struct uart_port *port) { struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + unsigned int ucon; - return (info->get_clksrc)(port, c); -} - -static inline int -s3c24xx_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c) -{ - struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + if (info->num_clks == 1) + return 0; - return (info->set_clksrc)(port, c); + ucon = rd_regl(port, S3C2410_UCON); + ucon &= info->clksel_mask; + return ucon >> info->clksel_shift; } -struct baud_calc { - struct s3c24xx_uart_clksrc *clksrc; - unsigned int calc; - unsigned int divslot; - unsigned int quot; - struct clk *src; -}; - -static int s3c24xx_serial_calcbaud(struct baud_calc *calc, - struct uart_port *port, - struct s3c24xx_uart_clksrc *clksrc, - unsigned int baud) +static void s3c24xx_serial_setsource(struct uart_port *port, + unsigned int clk_sel) { - struct s3c24xx_uart_port *ourport = to_ourport(port); - unsigned long rate; - - calc->src = clk_get(port->dev, clksrc->name); - if (calc->src == NULL || IS_ERR(calc->src)) - return 0; - - rate = clk_get_rate(calc->src); - rate /= clksrc->divisor; + struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + unsigned int ucon; - calc->clksrc = clksrc; + if (info->num_clks == 1) + return; - if (ourport->info->has_divslot) { - unsigned long div = rate / baud; - - /* The UDIVSLOT register on the newer UARTs allows us to - * get a divisor adjustment of 1/16th on the baud clock. - * - * We don't keep the UDIVSLOT value (the 16ths we calculated - * by not multiplying the baud by 16) as it is easy enough - * to recalculate. - */ - - calc->quot = div / 16; - calc->calc = rate / div; - } else { - calc->quot = (rate + (8 * baud)) / (16 * baud); - calc->calc = (rate / (calc->quot * 16)); - } + ucon = rd_regl(port, S3C2410_UCON); + if ((ucon & info->clksel_mask) >> info->clksel_shift == clk_sel) + return; - calc->quot--; - return 1; + ucon &= ~info->clksel_mask; + ucon |= clk_sel << info->clksel_shift; + wr_regl(port, S3C2410_UCON, ucon); } -static unsigned int s3c24xx_serial_getclk(struct uart_port *port, - struct s3c24xx_uart_clksrc **clksrc, - struct clk **clk, - unsigned int baud) +static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport, + unsigned int req_baud, struct clk **best_clk, + unsigned int *clk_num) { - struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port); - struct s3c24xx_uart_clksrc *clkp; - struct baud_calc res[MAX_CLKS]; - struct baud_calc *resptr, *best, *sptr; - int i; - - clkp = cfg->clocks; - best = NULL; - - if (cfg->clocks_size < 2) { - if (cfg->clocks_size == 0) - clkp = &tmp_clksrc; - - /* check to see if we're sourcing fclk, and if so we're - * going to have to update the clock source - */ - - if (strcmp(clkp->name, "fclk") == 0) { - struct s3c24xx_uart_clksrc src; - - s3c24xx_serial_getsource(port, &src); - - /* check that the port already using fclk, and if - * not, then re-select fclk + struct s3c24xx_uart_info *info = ourport->info; + struct clk *clk; + unsigned long rate; + unsigned int cnt, baud, quot, clk_sel, best_quot = 0; + char clkname[MAX_CLK_NAME_LENGTH]; + int calc_deviation, deviation = (1 << 30) - 1; + + *best_clk = NULL; + clk_sel = (ourport->cfg->clk_sel) ? ourport->cfg->clk_sel : + ourport->info->def_clk_sel; + for (cnt = 0; cnt < info->num_clks; cnt++) { + if (!(clk_sel & (1 << cnt))) + continue; + + sprintf(clkname, "clk_uart_baud%d", cnt); + clk = clk_get(ourport->port.dev, clkname); + if (IS_ERR_OR_NULL(clk)) + continue; + + rate = clk_get_rate(clk); + if (!rate) + continue; + + if (ourport->info->has_divslot) { + unsigned long div = rate / req_baud; + + /* The UDIVSLOT register on the newer UARTs allows us to + * get a divisor adjustment of 1/16th on the baud clock. + * + * We don't keep the UDIVSLOT value (the 16ths we + * calculated by not multiplying the baud by 16) as it + * is easy enough to recalculate. */ - if (strcmp(src.name, clkp->name) == 0) { - s3c24xx_serial_setsource(port, clkp); - s3c24xx_serial_getsource(port, &src); - } - - clkp->divisor = src.divisor; - } - - s3c24xx_serial_calcbaud(res, port, clkp, baud); - best = res; - resptr = best + 1; - } else { - resptr = res; - - for (i = 0; i < cfg->clocks_size; i++, clkp++) { - if (s3c24xx_serial_calcbaud(resptr, port, clkp, baud)) - resptr++; + quot = div / 16; + baud = rate / div; + } else { + quot = (rate + (8 * req_baud)) / (16 * req_baud); + baud = rate / (quot * 16); } - } - - /* ok, we now need to select the best clock we found */ - - if (!best) { - unsigned int deviation = (1<<30)|((1<<30)-1); - int calc_deviation; + quot--; - for (sptr = res; sptr < resptr; sptr++) { - calc_deviation = baud - sptr->calc; - if (calc_deviation < 0) - calc_deviation = -calc_deviation; + calc_deviation = req_baud - baud; + if (calc_deviation < 0) + calc_deviation = -calc_deviation; - if (calc_deviation < deviation) { - best = sptr; - deviation = calc_deviation; - } + if (calc_deviation < deviation) { + *best_clk = clk; + best_quot = quot; + *clk_num = cnt; + deviation = calc_deviation; } } - /* store results to pass back */ - - *clksrc = best->clksrc; - *clk = best->src; - - return best->quot; + return best_quot; } /* udivslot_table[] @@ -735,10 +684,9 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, { struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port); struct s3c24xx_uart_port *ourport = to_ourport(port); - struct s3c24xx_uart_clksrc *clksrc = NULL; struct clk *clk = NULL; unsigned long flags; - unsigned int baud, quot; + unsigned int baud, quot, clk_sel = 0; unsigned int ulcon; unsigned int umcon; unsigned int udivslot = 0; @@ -754,17 +702,16 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, */ baud = uart_get_baud_rate(port, termios, old, 0, 115200*8); - + quot = s3c24xx_serial_getclk(ourport, baud, &clk, &clk_sel); if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST) quot = port->custom_divisor; - else - quot = s3c24xx_serial_getclk(port, &clksrc, &clk, baud); + if (!clk) + return; /* check to see if we need to change clock source */ - if (ourport->clksrc != clksrc || ourport->baudclk != clk) { - dbg("selecting clock %p\n", clk); - s3c24xx_serial_setsource(port, clksrc); + if (ourport->baudclk != clk) { + s3c24xx_serial_setsource(port, clk_sel); if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) { clk_disable(ourport->baudclk); @@ -773,7 +720,6 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, clk_enable(clk); - ourport->clksrc = clksrc; ourport->baudclk = clk; ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0; } @@ -1020,16 +966,29 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS /* s3c24xx_serial_resetport * - * wrapper to call the specific reset for this port (reset the fifos - * and the settings) + * reset the fifos and other the settings. */ -static inline int s3c24xx_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) +static void s3c24xx_serial_resetport(struct uart_port *port, + struct s3c2410_uartcfg *cfg) { struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + unsigned long ucon = rd_regl(port, S3C2410_UCON); + unsigned int ucon_mask; + + ucon_mask = info->clksel_mask; + if (info->type == PORT_S3C2440) + ucon_mask |= S3C2440_UCON0_DIVMASK; - return (info->reset_port)(port, cfg); + ucon &= ucon_mask; + wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); + + /* reset both fifos */ + wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); + wr_regl(port, S3C2410_UFCON, cfg->ufcon); + + /* some delay is required after fifo reset */ + udelay(1); } @@ -1121,11 +1080,10 @@ static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *p */ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, - struct s3c24xx_uart_info *info, struct platform_device *platdev) { struct uart_port *port = &ourport->port; - struct s3c2410_uartcfg *cfg; + struct s3c2410_uartcfg *cfg = ourport->cfg; struct resource *res; int ret; @@ -1134,30 +1092,16 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, if (platdev == NULL) return -ENODEV; - cfg = s3c24xx_dev_to_cfg(&platdev->dev); - if (port->mapbase != 0) return 0; - if (cfg->hwport > CONFIG_SERIAL_SAMSUNG_UARTS) { - printk(KERN_ERR "%s: port %d bigger than %d\n", __func__, - cfg->hwport, CONFIG_SERIAL_SAMSUNG_UARTS); - return -ERANGE; - } - /* setup info for port */ port->dev = &platdev->dev; - ourport->info = info; /* Startup sequence is different for s3c64xx and higher SoC's */ if (s3c24xx_serial_has_interrupt_mask(port)) s3c24xx_serial_ops.startup = s3c64xx_serial_startup; - /* copy the info in from provided structure */ - ourport->port.fifosize = info->fifosize; - - dbg("s3c24xx_serial_init_port: %p (hw %d)...\n", port, cfg->hwport); - port->uartclk = 1; if (cfg->uart_flags & UPF_CONS_FLOW) { @@ -1215,43 +1159,74 @@ static ssize_t s3c24xx_serial_show_clksrc(struct device *dev, struct uart_port *port = s3c24xx_dev_to_port(dev); struct s3c24xx_uart_port *ourport = to_ourport(port); - return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->clksrc->name); + return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->baudclk->name); } static DEVICE_ATTR(clock_source, S_IRUGO, s3c24xx_serial_show_clksrc, NULL); + /* Device driver serial port probe */ +static const struct of_device_id s3c24xx_uart_dt_match[]; static int probe_index; -int s3c24xx_serial_probe(struct platform_device *dev, - struct s3c24xx_uart_info *info) +static inline struct s3c24xx_serial_drv_data *s3c24xx_get_driver_data( + struct platform_device *pdev) +{ +#ifdef CONFIG_OF + if (pdev->dev.of_node) { + const struct of_device_id *match; + match = of_match_node(s3c24xx_uart_dt_match, pdev->dev.of_node); + return (struct s3c24xx_serial_drv_data *)match->data; + } +#endif + return (struct s3c24xx_serial_drv_data *) + platform_get_device_id(pdev)->driver_data; +} + +static int s3c24xx_serial_probe(struct platform_device *pdev) { struct s3c24xx_uart_port *ourport; int ret; - dbg("s3c24xx_serial_probe(%p, %p) %d\n", dev, info, probe_index); + dbg("s3c24xx_serial_probe(%p) %d\n", pdev, probe_index); ourport = &s3c24xx_serial_ports[probe_index]; + + ourport->drv_data = s3c24xx_get_driver_data(pdev); + if (!ourport->drv_data) { + dev_err(&pdev->dev, "could not find driver data\n"); + return -ENODEV; + } + + ourport->info = ourport->drv_data->info; + ourport->cfg = (pdev->dev.platform_data) ? + (struct s3c2410_uartcfg *)pdev->dev.platform_data : + ourport->drv_data->def_cfg; + + ourport->port.fifosize = (ourport->info->fifosize) ? + ourport->info->fifosize : + ourport->drv_data->fifosize[probe_index]; + probe_index++; dbg("%s: initialising port %p...\n", __func__, ourport); - ret = s3c24xx_serial_init_port(ourport, info, dev); + ret = s3c24xx_serial_init_port(ourport, pdev); if (ret < 0) goto probe_err; dbg("%s: adding port\n", __func__); uart_add_one_port(&s3c24xx_uart_drv, &ourport->port); - platform_set_drvdata(dev, &ourport->port); + platform_set_drvdata(pdev, &ourport->port); - ret = device_create_file(&dev->dev, &dev_attr_clock_source); + ret = device_create_file(&pdev->dev, &dev_attr_clock_source); if (ret < 0) - printk(KERN_ERR "%s: failed to add clksrc attr.\n", __func__); + dev_err(&pdev->dev, "failed to add clock source attr.\n"); ret = s3c24xx_serial_cpufreq_register(ourport); if (ret < 0) - dev_err(&dev->dev, "failed to add cpufreq notifier\n"); + dev_err(&pdev->dev, "failed to add cpufreq notifier\n"); return 0; @@ -1259,9 +1234,7 @@ int s3c24xx_serial_probe(struct platform_device *dev, return ret; } -EXPORT_SYMBOL_GPL(s3c24xx_serial_probe); - -int __devexit s3c24xx_serial_remove(struct platform_device *dev) +static int __devexit s3c24xx_serial_remove(struct platform_device *dev) { struct uart_port *port = s3c24xx_dev_to_port(&dev->dev); @@ -1274,8 +1247,6 @@ int __devexit s3c24xx_serial_remove(struct platform_device *dev) return 0; } -EXPORT_SYMBOL_GPL(s3c24xx_serial_remove); - /* UART power management code */ #ifdef CONFIG_PM_SLEEP static int s3c24xx_serial_suspend(struct device *dev) @@ -1315,41 +1286,6 @@ static const struct dev_pm_ops s3c24xx_serial_pm_ops = { #define SERIAL_SAMSUNG_PM_OPS NULL #endif /* CONFIG_PM_SLEEP */ -int s3c24xx_serial_init(struct platform_driver *drv, - struct s3c24xx_uart_info *info) -{ - dbg("s3c24xx_serial_init(%p,%p)\n", drv, info); - - drv->driver.pm = SERIAL_SAMSUNG_PM_OPS; - - return platform_driver_register(drv); -} - -EXPORT_SYMBOL_GPL(s3c24xx_serial_init); - -/* module initialisation code */ - -static int __init s3c24xx_serial_modinit(void) -{ - int ret; - - ret = uart_register_driver(&s3c24xx_uart_drv); - if (ret < 0) { - printk(KERN_ERR "failed to register UART driver\n"); - return -1; - } - - return 0; -} - -static void __exit s3c24xx_serial_modexit(void) -{ - uart_unregister_driver(&s3c24xx_uart_drv); -} - -module_init(s3c24xx_serial_modinit); -module_exit(s3c24xx_serial_modexit); - /* Console code */ #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE @@ -1395,12 +1331,13 @@ static void __init s3c24xx_serial_get_options(struct uart_port *port, int *baud, int *parity, int *bits) { - struct s3c24xx_uart_clksrc clksrc; struct clk *clk; unsigned int ulcon; unsigned int ucon; unsigned int ubrdiv; unsigned long rate; + unsigned int clk_sel; + char clk_name[MAX_CLK_NAME_LENGTH]; ulcon = rd_regl(port, S3C2410_ULCON); ucon = rd_regl(port, S3C2410_UCON); @@ -1445,44 +1382,21 @@ s3c24xx_serial_get_options(struct uart_port *port, int *baud, /* now calculate the baud rate */ - s3c24xx_serial_getsource(port, &clksrc); + clk_sel = s3c24xx_serial_getsource(port); + sprintf(clk_name, "clk_uart_baud%d", clk_sel); - clk = clk_get(port->dev, clksrc.name); + clk = clk_get(port->dev, clk_name); if (!IS_ERR(clk) && clk != NULL) - rate = clk_get_rate(clk) / clksrc.divisor; + rate = clk_get_rate(clk); else rate = 1; - *baud = rate / (16 * (ubrdiv + 1)); dbg("calculated baud %d\n", *baud); } } -/* s3c24xx_serial_init_ports - * - * initialise the serial ports from the machine provided initialisation - * data. -*/ - -static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info **info) -{ - struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports; - struct platform_device **platdev_ptr; - int i; - - dbg("s3c24xx_serial_init_ports: initialising ports...\n"); - - platdev_ptr = s3c24xx_uart_devs; - - for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++, ptr++, platdev_ptr++) { - s3c24xx_serial_init_port(ptr, info[i], *platdev_ptr); - } - - return 0; -} - static int __init s3c24xx_serial_console_setup(struct console *co, char *options) { @@ -1526,11 +1440,6 @@ s3c24xx_serial_console_setup(struct console *co, char *options) return uart_set_options(port, co, baud, parity, bits, flow); } -/* s3c24xx_serial_initconsole - * - * initialise the console from one of the uart drivers -*/ - static struct console s3c24xx_serial_console = { .name = S3C24XX_SERIAL_NAME, .device = uart_console_device, @@ -1540,34 +1449,250 @@ static struct console s3c24xx_serial_console = { .setup = s3c24xx_serial_console_setup, .data = &s3c24xx_uart_drv, }; +#endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */ -int s3c24xx_serial_initconsole(struct platform_driver *drv, - struct s3c24xx_uart_info **info) +#ifdef CONFIG_CPU_S3C2410 +static struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = { + .info = &(struct s3c24xx_uart_info) { + .name = "Samsung S3C2410 UART", + .type = PORT_S3C2410, + .fifosize = 16, + .rx_fifomask = S3C2410_UFSTAT_RXMASK, + .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2410_UFSTAT_RXFULL, + .tx_fifofull = S3C2410_UFSTAT_TXFULL, + .tx_fifomask = S3C2410_UFSTAT_TXMASK, + .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT, + .def_clk_sel = S3C2410_UCON_CLKSEL0, + .num_clks = 2, + .clksel_mask = S3C2410_UCON_CLKMASK, + .clksel_shift = S3C2410_UCON_CLKSHIFT, + }, + .def_cfg = &(struct s3c2410_uartcfg) { + .ucon = S3C2410_UCON_DEFAULT, + .ufcon = S3C2410_UFCON_DEFAULT, + }, +}; +#define S3C2410_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2410_serial_drv_data) +#else +#define S3C2410_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#endif -{ - struct platform_device *dev = s3c24xx_uart_devs[0]; +#ifdef CONFIG_CPU_S3C2412 +static struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = { + .info = &(struct s3c24xx_uart_info) { + .name = "Samsung S3C2412 UART", + .type = PORT_S3C2412, + .fifosize = 64, + .has_divslot = 1, + .rx_fifomask = S3C2440_UFSTAT_RXMASK, + .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2440_UFSTAT_RXFULL, + .tx_fifofull = S3C2440_UFSTAT_TXFULL, + .tx_fifomask = S3C2440_UFSTAT_TXMASK, + .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, + .def_clk_sel = S3C2410_UCON_CLKSEL2, + .num_clks = 4, + .clksel_mask = S3C2412_UCON_CLKMASK, + .clksel_shift = S3C2412_UCON_CLKSHIFT, + }, + .def_cfg = &(struct s3c2410_uartcfg) { + .ucon = S3C2410_UCON_DEFAULT, + .ufcon = S3C2410_UFCON_DEFAULT, + }, +}; +#define S3C2412_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2412_serial_drv_data) +#else +#define S3C2412_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#endif - dbg("s3c24xx_serial_initconsole\n"); +#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2416) || \ + defined(CONFIG_CPU_S3C2443) +static struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = { + .info = &(struct s3c24xx_uart_info) { + .name = "Samsung S3C2440 UART", + .type = PORT_S3C2440, + .fifosize = 64, + .has_divslot = 1, + .rx_fifomask = S3C2440_UFSTAT_RXMASK, + .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2440_UFSTAT_RXFULL, + .tx_fifofull = S3C2440_UFSTAT_TXFULL, + .tx_fifomask = S3C2440_UFSTAT_TXMASK, + .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, + .def_clk_sel = S3C2410_UCON_CLKSEL2, + .num_clks = 4, + .clksel_mask = S3C2412_UCON_CLKMASK, + .clksel_shift = S3C2412_UCON_CLKSHIFT, + }, + .def_cfg = &(struct s3c2410_uartcfg) { + .ucon = S3C2410_UCON_DEFAULT, + .ufcon = S3C2410_UFCON_DEFAULT, + }, +}; +#define S3C2440_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2440_serial_drv_data) +#else +#define S3C2440_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#endif - /* select driver based on the cpu */ +#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410) || \ + defined(CONFIG_CPU_S5P6440) || defined(CONFIG_CPU_S5P6450) || \ + defined(CONFIG_CPU_S5PC100) +static struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = { + .info = &(struct s3c24xx_uart_info) { + .name = "Samsung S3C6400 UART", + .type = PORT_S3C6400, + .fifosize = 64, + .has_divslot = 1, + .rx_fifomask = S3C2440_UFSTAT_RXMASK, + .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2440_UFSTAT_RXFULL, + .tx_fifofull = S3C2440_UFSTAT_TXFULL, + .tx_fifomask = S3C2440_UFSTAT_TXMASK, + .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, + .def_clk_sel = S3C2410_UCON_CLKSEL2, + .num_clks = 4, + .clksel_mask = S3C6400_UCON_CLKMASK, + .clksel_shift = S3C6400_UCON_CLKSHIFT, + }, + .def_cfg = &(struct s3c2410_uartcfg) { + .ucon = S3C2410_UCON_DEFAULT, + .ufcon = S3C2410_UFCON_DEFAULT, + }, +}; +#define S3C6400_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c6400_serial_drv_data) +#else +#define S3C6400_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#endif - if (dev == NULL) { - printk(KERN_ERR "s3c24xx: no devices for console init\n"); - return 0; - } +#ifdef CONFIG_CPU_S5PV210 +static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = { + .info = &(struct s3c24xx_uart_info) { + .name = "Samsung S5PV210 UART", + .type = PORT_S3C6400, + .has_divslot = 1, + .rx_fifomask = S5PV210_UFSTAT_RXMASK, + .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, + .rx_fifofull = S5PV210_UFSTAT_RXFULL, + .tx_fifofull = S5PV210_UFSTAT_TXFULL, + .tx_fifomask = S5PV210_UFSTAT_TXMASK, + .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, + .def_clk_sel = S3C2410_UCON_CLKSEL0, + .num_clks = 2, + .clksel_mask = S5PV210_UCON_CLKMASK, + .clksel_shift = S5PV210_UCON_CLKSHIFT, + }, + .def_cfg = &(struct s3c2410_uartcfg) { + .ucon = S5PV210_UCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, + .fifosize = { 256, 64, 16, 16 }, +}; +#define S5PV210_SERIAL_DRV_DATA ((kernel_ulong_t)&s5pv210_serial_drv_data) +#else +#define S5PV210_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#endif - if (strcmp(dev->name, drv->driver.name) != 0) - return 0; +#ifdef CONFIG_CPU_EXYNOS4210 +static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = { + .info = &(struct s3c24xx_uart_info) { + .name = "Samsung Exynos4 UART", + .type = PORT_S3C6400, + .has_divslot = 1, + .rx_fifomask = S5PV210_UFSTAT_RXMASK, + .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, + .rx_fifofull = S5PV210_UFSTAT_RXFULL, + .tx_fifofull = S5PV210_UFSTAT_TXFULL, + .tx_fifomask = S5PV210_UFSTAT_TXMASK, + .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, + .def_clk_sel = S3C2410_UCON_CLKSEL0, + .num_clks = 1, + .clksel_mask = 0, + .clksel_shift = 0, + }, + .def_cfg = &(struct s3c2410_uartcfg) { + .ucon = S5PV210_UCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + .has_fracval = 1, + }, + .fifosize = { 256, 64, 16, 16 }, +}; +#define EXYNOS4210_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos4210_serial_drv_data) +#else +#define EXYNOS4210_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#endif - s3c24xx_serial_console.data = &s3c24xx_uart_drv; - s3c24xx_serial_init_ports(info); +static struct platform_device_id s3c24xx_serial_driver_ids[] = { + { + .name = "s3c2410-uart", + .driver_data = S3C2410_SERIAL_DRV_DATA, + }, { + .name = "s3c2412-uart", + .driver_data = S3C2412_SERIAL_DRV_DATA, + }, { + .name = "s3c2440-uart", + .driver_data = S3C2440_SERIAL_DRV_DATA, + }, { + .name = "s3c6400-uart", + .driver_data = S3C6400_SERIAL_DRV_DATA, + }, { + .name = "s5pv210-uart", + .driver_data = S5PV210_SERIAL_DRV_DATA, + }, { + .name = "exynos4210-uart", + .driver_data = EXYNOS4210_SERIAL_DRV_DATA, + }, + { }, +}; +MODULE_DEVICE_TABLE(platform, s3c24xx_serial_driver_ids); - register_console(&s3c24xx_serial_console); - return 0; +#ifdef CONFIG_OF +static const struct of_device_id s3c24xx_uart_dt_match[] = { + { .compatible = "samsung,exynos4210-uart", + .data = (void *)EXYNOS4210_SERIAL_DRV_DATA }, + {}, +}; +MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match); +#else +#define s3c24xx_uart_dt_match NULL +#endif + +static struct platform_driver samsung_serial_driver = { + .probe = s3c24xx_serial_probe, + .remove = __devexit_p(s3c24xx_serial_remove), + .id_table = s3c24xx_serial_driver_ids, + .driver = { + .name = "samsung-uart", + .owner = THIS_MODULE, + .pm = SERIAL_SAMSUNG_PM_OPS, + .of_match_table = s3c24xx_uart_dt_match, + }, +}; + +/* module initialisation code */ + +static int __init s3c24xx_serial_modinit(void) +{ + int ret; + + ret = uart_register_driver(&s3c24xx_uart_drv); + if (ret < 0) { + printk(KERN_ERR "failed to register UART driver\n"); + return -1; + } + + return platform_driver_register(&samsung_serial_driver); } -#endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */ +static void __exit s3c24xx_serial_modexit(void) +{ + uart_unregister_driver(&s3c24xx_uart_drv); +} + +module_init(s3c24xx_serial_modinit); +module_exit(s3c24xx_serial_modexit); +MODULE_ALIAS("platform:samsung-uart"); MODULE_DESCRIPTION("Samsung SoC Serial port driver"); MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/samsung.h b/drivers/tty/serial/samsung.h index 8e87b788e5c6..1a4bca3e4179 100644 --- a/drivers/tty/serial/samsung.h +++ b/drivers/tty/serial/samsung.h @@ -19,20 +19,25 @@ struct s3c24xx_uart_info { unsigned long tx_fifomask; unsigned long tx_fifoshift; unsigned long tx_fifofull; + unsigned int def_clk_sel; + unsigned long num_clks; + unsigned long clksel_mask; + unsigned long clksel_shift; /* uart port features */ unsigned int has_divslot:1; - /* clock source control */ - - int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk); - int (*set_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk); - /* uart controls */ int (*reset_port)(struct uart_port *, struct s3c2410_uartcfg *); }; +struct s3c24xx_serial_drv_data { + struct s3c24xx_uart_info *info; + struct s3c2410_uartcfg *def_cfg; + unsigned int fifosize[CONFIG_SERIAL_SAMSUNG_UARTS]; +}; + struct s3c24xx_uart_port { unsigned char rx_claimed; unsigned char tx_claimed; @@ -43,10 +48,13 @@ struct s3c24xx_uart_port { unsigned int tx_irq; struct s3c24xx_uart_info *info; - struct s3c24xx_uart_clksrc *clksrc; struct clk *clk; struct clk *baudclk; struct uart_port port; + struct s3c24xx_serial_drv_data *drv_data; + + /* reference to platform data */ + struct s3c2410_uartcfg *cfg; #ifdef CONFIG_CPU_FREQ struct notifier_block freq_transition; @@ -56,7 +64,6 @@ struct s3c24xx_uart_port { /* conversion functions */ #define s3c24xx_dev_to_port(__dev) (struct uart_port *)dev_get_drvdata(__dev) -#define s3c24xx_dev_to_cfg(__dev) (struct s3c2410_uartcfg *)((__dev)->platform_data) /* register access controls */ @@ -69,17 +76,6 @@ struct s3c24xx_uart_port { #define wr_regb(port, reg, val) __raw_writeb(val, portaddr(port, reg)) #define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg)) -extern int s3c24xx_serial_probe(struct platform_device *dev, - struct s3c24xx_uart_info *uart); - -extern int __devexit s3c24xx_serial_remove(struct platform_device *dev); - -extern int s3c24xx_serial_initconsole(struct platform_driver *drv, - struct s3c24xx_uart_info **uart); - -extern int s3c24xx_serial_init(struct platform_driver *drv, - struct s3c24xx_uart_info *info); - #ifdef CONFIG_SERIAL_SAMSUNG_DEBUG extern void printascii(const char *); diff --git a/drivers/watchdog/coh901327_wdt.c b/drivers/watchdog/coh901327_wdt.c index 03f449a430d2..5b89f7d6cd0f 100644 --- a/drivers/watchdog/coh901327_wdt.c +++ b/drivers/watchdog/coh901327_wdt.c @@ -76,8 +76,6 @@ static int irq; static void __iomem *virtbase; static unsigned long coh901327_users; static unsigned long boot_status; -static u16 wdogenablestore; -static u16 irqmaskstore; static struct device *parent; /* @@ -461,6 +459,10 @@ out: } #ifdef CONFIG_PM + +static u16 wdogenablestore; +static u16 irqmaskstore; + static int coh901327_suspend(struct platform_device *pdev, pm_message_t state) { irqmaskstore = readw(virtbase + U300_WDOG_IMR) & 0x0001U; diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index 3774c9b8dac9..8464ea1c36a1 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -231,6 +231,7 @@ static int __devinit cru_detect(unsigned long map_entry, cmn_regs.u1.reax = CRU_BIOS_SIGNATURE_VALUE; + set_memory_x((unsigned long)bios32_entrypoint, (2 * PAGE_SIZE)); asminline_call(&cmn_regs, bios32_entrypoint); if (cmn_regs.u1.ral != 0) { @@ -248,8 +249,10 @@ static int __devinit cru_detect(unsigned long map_entry, if ((physical_bios_base + physical_bios_offset)) { cru_rom_addr = ioremap(cru_physical_address, cru_length); - if (cru_rom_addr) + if (cru_rom_addr) { + set_memory_x((unsigned long)cru_rom_addr, cru_length); retval = 0; + } } printk(KERN_DEBUG "hpwdt: CRU Base Address: 0x%lx\n", diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c index ba6ad662635a..99796c5d913d 100644 --- a/drivers/watchdog/iTCO_wdt.c +++ b/drivers/watchdog/iTCO_wdt.c @@ -384,10 +384,10 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); -static int turn_SMI_watchdog_clear_off = 0; +static int turn_SMI_watchdog_clear_off = 1; module_param(turn_SMI_watchdog_clear_off, int, 0); MODULE_PARM_DESC(turn_SMI_watchdog_clear_off, - "Turn off SMI clearing watchdog (default=0)"); + "Turn off SMI clearing watchdog (depends on TCO-version)(default=1)"); /* * Some TCO specific functions @@ -813,7 +813,7 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, ret = -EIO; goto out_unmap; } - if (turn_SMI_watchdog_clear_off) { + if (turn_SMI_watchdog_clear_off >= iTCO_wdt_private.iTCO_version) { /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */ val32 = inl(SMI_EN); val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c index cc2cfbe33b30..bfaf9bb1ee0d 100644 --- a/drivers/watchdog/sp805_wdt.c +++ b/drivers/watchdog/sp805_wdt.c @@ -351,7 +351,7 @@ static int __devexit sp805_wdt_remove(struct amba_device *adev) return 0; } -static struct amba_id sp805_wdt_ids[] __initdata = { +static struct amba_id sp805_wdt_ids[] = { { .id = 0x00141805, .mask = 0x00ffffff, diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c index 3eeb97661262..98954003a8d3 100644 --- a/fs/ceph/dir.c +++ b/fs/ceph/dir.c @@ -1094,42 +1094,19 @@ static int ceph_snapdir_d_revalidate(struct dentry *dentry, /* * Set/clear/test dir complete flag on the dir's dentry. */ -static struct dentry * __d_find_any_alias(struct inode *inode) -{ - struct dentry *alias; - - if (list_empty(&inode->i_dentry)) - return NULL; - alias = list_first_entry(&inode->i_dentry, struct dentry, d_alias); - return alias; -} - void ceph_dir_set_complete(struct inode *inode) { - struct dentry *dentry = __d_find_any_alias(inode); - - if (dentry && ceph_dentry(dentry)) { - dout(" marking %p (%p) complete\n", inode, dentry); - set_bit(CEPH_D_COMPLETE, &ceph_dentry(dentry)->flags); - } + /* not yet implemented */ } void ceph_dir_clear_complete(struct inode *inode) { - struct dentry *dentry = __d_find_any_alias(inode); - - if (dentry && ceph_dentry(dentry)) { - dout(" marking %p (%p) NOT complete\n", inode, dentry); - clear_bit(CEPH_D_COMPLETE, &ceph_dentry(dentry)->flags); - } + /* not yet implemented */ } bool ceph_dir_test_complete(struct inode *inode) { - struct dentry *dentry = __d_find_any_alias(inode); - - if (dentry && ceph_dentry(dentry)) - return test_bit(CEPH_D_COMPLETE, &ceph_dentry(dentry)->flags); + /* not yet implemented */ return false; } diff --git a/fs/locks.c b/fs/locks.c index 3b0d05dcd7c1..637694bf3a03 100644 --- a/fs/locks.c +++ b/fs/locks.c @@ -1205,6 +1205,8 @@ int __break_lease(struct inode *inode, unsigned int mode) int want_write = (mode & O_ACCMODE) != O_RDONLY; new_fl = lease_alloc(NULL, want_write ? F_WRLCK : F_RDLCK); + if (IS_ERR(new_fl)) + return PTR_ERR(new_fl); lock_flocks(); @@ -1221,12 +1223,6 @@ int __break_lease(struct inode *inode, unsigned int mode) if (fl->fl_owner == current->files) i_have_this_lease = 1; - if (IS_ERR(new_fl) && !i_have_this_lease - && ((mode & O_NONBLOCK) == 0)) { - error = PTR_ERR(new_fl); - goto out; - } - break_time = 0; if (lease_break_time > 0) { break_time = jiffies + lease_break_time * HZ; @@ -1284,8 +1280,7 @@ restart: out: unlock_flocks(); - if (!IS_ERR(new_fl)) - locks_free_lock(new_fl); + locks_free_lock(new_fl); return error; } diff --git a/fs/proc/stat.c b/fs/proc/stat.c index 2a30d67dd6b8..0855e6f20391 100644 --- a/fs/proc/stat.c +++ b/fs/proc/stat.c @@ -32,7 +32,7 @@ static cputime64_t get_idle_time(int cpu) idle = kstat_cpu(cpu).cpustat.idle; idle = cputime64_add(idle, arch_idle_time(cpu)); } else - idle = nsecs_to_jiffies64(1000 * idle_time); + idle = usecs_to_cputime64(idle_time); return idle; } @@ -46,7 +46,7 @@ static cputime64_t get_iowait_time(int cpu) /* !NO_HZ so we can rely on cpustat.iowait */ iowait = kstat_cpu(cpu).cpustat.iowait; else - iowait = nsecs_to_jiffies64(1000 * iowait_time); + iowait = usecs_to_cputime64(iowait_time); return iowait; } diff --git a/fs/xfs/xfs_super.c b/fs/xfs/xfs_super.c index 3eca58f51ae9..8a899496fd5f 100644 --- a/fs/xfs/xfs_super.c +++ b/fs/xfs/xfs_super.c @@ -869,27 +869,6 @@ xfs_fs_dirty_inode( } STATIC int -xfs_log_inode( - struct xfs_inode *ip) -{ - struct xfs_mount *mp = ip->i_mount; - struct xfs_trans *tp; - int error; - - tp = xfs_trans_alloc(mp, XFS_TRANS_FSYNC_TS); - error = xfs_trans_reserve(tp, 0, XFS_FSYNC_TS_LOG_RES(mp), 0, 0, 0); - if (error) { - xfs_trans_cancel(tp, 0); - return error; - } - - xfs_ilock(ip, XFS_ILOCK_EXCL); - xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL); - xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE); - return xfs_trans_commit(tp, 0); -} - -STATIC int xfs_fs_write_inode( struct inode *inode, struct writeback_control *wbc) @@ -902,10 +881,8 @@ xfs_fs_write_inode( if (XFS_FORCED_SHUTDOWN(mp)) return -XFS_ERROR(EIO); - if (!ip->i_update_core) - return 0; - if (wbc->sync_mode == WB_SYNC_ALL) { + if (wbc->sync_mode == WB_SYNC_ALL || wbc->for_kupdate) { /* * Make sure the inode has made it it into the log. Instead * of forcing it all the way to stable storage using a @@ -913,11 +890,14 @@ xfs_fs_write_inode( * ->sync_fs call do that for thus, which reduces the number * of synchronous log forces dramatically. */ - error = xfs_log_inode(ip); + error = xfs_log_dirty_inode(ip, NULL, 0); if (error) goto out; return 0; } else { + if (!ip->i_update_core) + return 0; + /* * We make this non-blocking if the inode is contended, return * EAGAIN to indicate to the caller that they did not succeed. diff --git a/fs/xfs/xfs_sync.c b/fs/xfs/xfs_sync.c index be5c51d8f757..f0994aedcd15 100644 --- a/fs/xfs/xfs_sync.c +++ b/fs/xfs/xfs_sync.c @@ -336,6 +336,32 @@ xfs_sync_fsdata( return error; } +int +xfs_log_dirty_inode( + struct xfs_inode *ip, + struct xfs_perag *pag, + int flags) +{ + struct xfs_mount *mp = ip->i_mount; + struct xfs_trans *tp; + int error; + + if (!ip->i_update_core) + return 0; + + tp = xfs_trans_alloc(mp, XFS_TRANS_FSYNC_TS); + error = xfs_trans_reserve(tp, 0, XFS_FSYNC_TS_LOG_RES(mp), 0, 0, 0); + if (error) { + xfs_trans_cancel(tp, 0); + return error; + } + + xfs_ilock(ip, XFS_ILOCK_EXCL); + xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL); + xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE); + return xfs_trans_commit(tp, 0); +} + /* * When remounting a filesystem read-only or freezing the filesystem, we have * two phases to execute. This first phase is syncing the data before we @@ -359,6 +385,16 @@ xfs_quiesce_data( { int error, error2 = 0; + /* + * Log all pending size and timestamp updates. The vfs writeback + * code is supposed to do this, but due to its overagressive + * livelock detection it will skip inodes where appending writes + * were written out in the first non-blocking sync phase if their + * completion took long enough that it happened after taking the + * timestamp for the cut-off in the blocking phase. + */ + xfs_inode_ag_iterator(mp, xfs_log_dirty_inode, 0); + xfs_qm_sync(mp, SYNC_TRYLOCK); xfs_qm_sync(mp, SYNC_WAIT); diff --git a/fs/xfs/xfs_sync.h b/fs/xfs/xfs_sync.h index 941202e7ac6e..fa965479d788 100644 --- a/fs/xfs/xfs_sync.h +++ b/fs/xfs/xfs_sync.h @@ -34,6 +34,8 @@ void xfs_quiesce_attr(struct xfs_mount *mp); void xfs_flush_inodes(struct xfs_inode *ip); +int xfs_log_dirty_inode(struct xfs_inode *ip, struct xfs_perag *pag, int flags); + int xfs_reclaim_inodes(struct xfs_mount *mp, int mode); int xfs_reclaim_inodes_count(struct xfs_mount *mp); void xfs_reclaim_inodes_nr(struct xfs_mount *mp, int nr_to_scan); diff --git a/include/asm-generic/cputime.h b/include/asm-generic/cputime.h index 62ce6823c0f2..12a1764f612b 100644 --- a/include/asm-generic/cputime.h +++ b/include/asm-generic/cputime.h @@ -40,6 +40,7 @@ typedef u64 cputime64_t; */ #define cputime_to_usecs(__ct) jiffies_to_usecs(__ct) #define usecs_to_cputime(__msecs) usecs_to_jiffies(__msecs) +#define usecs_to_cputime64(__msecs) nsecs_to_jiffies64((__msecs) * 1000) /* * Convert cputime to seconds and back. diff --git a/include/linux/amba/pl330.h b/include/linux/amba/pl330.h index d12f077a6daf..12e023c19ac1 100644 --- a/include/linux/amba/pl330.h +++ b/include/linux/amba/pl330.h @@ -12,17 +12,9 @@ #ifndef __AMBA_PL330_H_ #define __AMBA_PL330_H_ +#include <linux/dmaengine.h> #include <asm/hardware/pl330.h> -struct dma_pl330_peri { - /* - * Peri_Req i/f of the DMAC that is - * peripheral could be reached from. - */ - u8 peri_id; /* specific dma id */ - enum pl330_reqtype rqtype; -}; - struct dma_pl330_platdata { /* * Number of valid peripherals connected to DMAC. @@ -33,9 +25,12 @@ struct dma_pl330_platdata { */ u8 nr_valid_peri; /* Array of valid peripherals */ - struct dma_pl330_peri *peri; + u8 *peri_id; + /* Operational capabilities */ + dma_cap_mask_t cap_mask; /* Bytes to allocate for MC buffer */ unsigned mcbuf_sz; }; +extern bool pl330_filter(struct dma_chan *chan, void *param); #endif /* __AMBA_PL330_H_ */ diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h index 99834e581b9e..bd4272b61a14 100644 --- a/include/linux/irqdomain.h +++ b/include/linux/irqdomain.h @@ -91,10 +91,11 @@ static inline unsigned int irq_domain_to_irq(struct irq_domain *d, extern void irq_domain_add(struct irq_domain *domain); extern void irq_domain_del(struct irq_domain *domain); + +extern struct irq_domain_ops irq_domain_simple_ops; #endif /* CONFIG_IRQ_DOMAIN */ #if defined(CONFIG_IRQ_DOMAIN) && defined(CONFIG_OF_IRQ) -extern struct irq_domain_ops irq_domain_simple_ops; extern void irq_domain_add_simple(struct device_node *controller, int irq_base); extern void irq_domain_generate_simple(const struct of_device_id *match, u64 phys_base, unsigned int irq_start); diff --git a/include/linux/kvm.h b/include/linux/kvm.h index c3892fc1d538..68e67e50d028 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -557,6 +557,7 @@ struct kvm_ppc_pvinfo { #define KVM_CAP_MAX_VCPUS 66 /* returns max vcpus per vm */ #define KVM_CAP_PPC_PAPR 68 #define KVM_CAP_S390_GMAP 71 +#define KVM_CAP_TSC_DEADLINE_TIMER 72 #ifdef KVM_CAP_IRQ_ROUTING diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h index 873d5be7926c..e5a7b9aaf552 100644 --- a/include/net/ip_vs.h +++ b/include/net/ip_vs.h @@ -1207,7 +1207,7 @@ extern void ip_vs_control_cleanup(void); extern struct ip_vs_dest * ip_vs_find_dest(struct net *net, int af, const union nf_inet_addr *daddr, __be16 dport, const union nf_inet_addr *vaddr, __be16 vport, - __u16 protocol, __u32 fwmark); + __u16 protocol, __u32 fwmark, __u32 flags); extern struct ip_vs_dest *ip_vs_try_bind_dest(struct ip_vs_conn *cp); diff --git a/kernel/futex.c b/kernel/futex.c index ea87f4d2f455..1614be20173d 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -314,17 +314,29 @@ again: #endif lock_page(page_head); + + /* + * If page_head->mapping is NULL, then it cannot be a PageAnon + * page; but it might be the ZERO_PAGE or in the gate area or + * in a special mapping (all cases which we are happy to fail); + * or it may have been a good file page when get_user_pages_fast + * found it, but truncated or holepunched or subjected to + * invalidate_complete_page2 before we got the page lock (also + * cases which we are happy to fail). And we hold a reference, + * so refcount care in invalidate_complete_page's remove_mapping + * prevents drop_caches from setting mapping to NULL beneath us. + * + * The case we do have to guard against is when memory pressure made + * shmem_writepage move it from filecache to swapcache beneath us: + * an unlikely race, but we do need to retry for page_head->mapping. + */ if (!page_head->mapping) { + int shmem_swizzled = PageSwapCache(page_head); unlock_page(page_head); put_page(page_head); - /* - * ZERO_PAGE pages don't have a mapping. Avoid a busy loop - * trying to find one. RW mapping would have COW'd (and thus - * have a mapping) so this page is RO and won't ever change. - */ - if ((page_head == ZERO_PAGE(address))) - return -EFAULT; - goto again; + if (shmem_swizzled) + goto again; + return -EFAULT; } /* diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c index 200ce832c585..7ca523b249ef 100644 --- a/kernel/irq/irqdomain.c +++ b/kernel/irq/irqdomain.c @@ -143,11 +143,6 @@ int irq_domain_simple_dt_translate(struct irq_domain *d, return 0; } -struct irq_domain_ops irq_domain_simple_ops = { - .dt_translate = irq_domain_simple_dt_translate, -}; -EXPORT_SYMBOL_GPL(irq_domain_simple_ops); - /** * irq_domain_create_simple() - Set up a 'simple' translation range */ @@ -182,3 +177,10 @@ void irq_domain_generate_simple(const struct of_device_id *match, } EXPORT_SYMBOL_GPL(irq_domain_generate_simple); #endif /* CONFIG_OF_IRQ */ + +struct irq_domain_ops irq_domain_simple_ops = { +#ifdef CONFIG_OF_IRQ + .dt_translate = irq_domain_simple_dt_translate, +#endif /* CONFIG_OF_IRQ */ +}; +EXPORT_SYMBOL_GPL(irq_domain_simple_ops); diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c index c4eb71c8b2ea..1ecd6ba36d6c 100644 --- a/kernel/time/clockevents.c +++ b/kernel/time/clockevents.c @@ -387,7 +387,6 @@ void clockevents_exchange_device(struct clock_event_device *old, * released list and do a notify add later. */ if (old) { - old->event_handler = clockevents_handle_noop; clockevents_set_mode(old, CLOCK_EVT_MODE_UNUSED); list_del(&old->list); list_add(&old->list, &clockevents_released); diff --git a/mm/hugetlb.c b/mm/hugetlb.c index 73f17c0293c0..2316840b337a 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -901,7 +901,6 @@ retry: h->resv_huge_pages += delta; ret = 0; - spin_unlock(&hugetlb_lock); /* Free the needed pages to the hugetlb pool */ list_for_each_entry_safe(page, tmp, &surplus_list, lru) { if ((--needed) < 0) @@ -915,6 +914,7 @@ retry: VM_BUG_ON(page_count(page)); enqueue_huge_page(h, page); } + spin_unlock(&hugetlb_lock); /* Free unnecessary surplus pages to the buddy allocator */ free: diff --git a/mm/mempolicy.c b/mm/mempolicy.c index adc395481813..c3fdbcb17658 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -636,6 +636,7 @@ static int mbind_range(struct mm_struct *mm, unsigned long start, struct vm_area_struct *prev; struct vm_area_struct *vma; int err = 0; + pgoff_t pgoff; unsigned long vmstart; unsigned long vmend; @@ -643,13 +644,21 @@ static int mbind_range(struct mm_struct *mm, unsigned long start, if (!vma || vma->vm_start > start) return -EFAULT; + if (start > vma->vm_start) + prev = vma; + for (; vma && vma->vm_start < end; prev = vma, vma = next) { next = vma->vm_next; vmstart = max(start, vma->vm_start); vmend = min(end, vma->vm_end); + if (mpol_equal(vma_policy(vma), new_pol)) + continue; + + pgoff = vma->vm_pgoff + + ((vmstart - vma->vm_start) >> PAGE_SHIFT); prev = vma_merge(mm, prev, vmstart, vmend, vma->vm_flags, - vma->anon_vma, vma->vm_file, vma->vm_pgoff, + vma->anon_vma, vma->vm_file, pgoff, new_pol); if (prev) { vma = prev; diff --git a/net/netfilter/ipvs/ip_vs_conn.c b/net/netfilter/ipvs/ip_vs_conn.c index 12571fb2881c..29fa5badde75 100644 --- a/net/netfilter/ipvs/ip_vs_conn.c +++ b/net/netfilter/ipvs/ip_vs_conn.c @@ -616,7 +616,7 @@ struct ip_vs_dest *ip_vs_try_bind_dest(struct ip_vs_conn *cp) if ((cp) && (!cp->dest)) { dest = ip_vs_find_dest(ip_vs_conn_net(cp), cp->af, &cp->daddr, cp->dport, &cp->vaddr, cp->vport, - cp->protocol, cp->fwmark); + cp->protocol, cp->fwmark, cp->flags); ip_vs_bind_dest(cp, dest); return dest; } else diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c index 008bf97cc91a..e1a66cf37f9a 100644 --- a/net/netfilter/ipvs/ip_vs_ctl.c +++ b/net/netfilter/ipvs/ip_vs_ctl.c @@ -619,15 +619,21 @@ struct ip_vs_dest *ip_vs_find_dest(struct net *net, int af, const union nf_inet_addr *daddr, __be16 dport, const union nf_inet_addr *vaddr, - __be16 vport, __u16 protocol, __u32 fwmark) + __be16 vport, __u16 protocol, __u32 fwmark, + __u32 flags) { struct ip_vs_dest *dest; struct ip_vs_service *svc; + __be16 port = dport; svc = ip_vs_service_get(net, af, fwmark, protocol, vaddr, vport); if (!svc) return NULL; - dest = ip_vs_lookup_dest(svc, daddr, dport); + if (fwmark && (flags & IP_VS_CONN_F_FWD_MASK) != IP_VS_CONN_F_MASQ) + port = 0; + dest = ip_vs_lookup_dest(svc, daddr, port); + if (!dest) + dest = ip_vs_lookup_dest(svc, daddr, port ^ dport); if (dest) atomic_inc(&dest->refcnt); ip_vs_service_put(svc); diff --git a/net/netfilter/ipvs/ip_vs_sync.c b/net/netfilter/ipvs/ip_vs_sync.c index 3cdd479f9b5d..2b6678c0ce14 100644 --- a/net/netfilter/ipvs/ip_vs_sync.c +++ b/net/netfilter/ipvs/ip_vs_sync.c @@ -740,7 +740,7 @@ static void ip_vs_proc_conn(struct net *net, struct ip_vs_conn_param *param, * but still handled. */ dest = ip_vs_find_dest(net, type, daddr, dport, param->vaddr, - param->vport, protocol, fwmark); + param->vport, protocol, fwmark, flags); /* Set the approprite ativity flag */ if (protocol == IPPROTO_TCP) { diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index ef21b221f036..257e77256c5c 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -135,7 +135,7 @@ nla_put_failure: static inline int ctnetlink_dump_timeout(struct sk_buff *skb, const struct nf_conn *ct) { - long timeout = (ct->timeout.expires - jiffies) / HZ; + long timeout = ((long)ct->timeout.expires - (long)jiffies) / HZ; if (timeout < 0) timeout = 0; @@ -1358,12 +1358,15 @@ ctnetlink_create_conntrack(struct net *net, u16 zone, nf_ct_protonum(ct)); if (helper == NULL) { rcu_read_unlock(); + spin_unlock_bh(&nf_conntrack_lock); #ifdef CONFIG_MODULES if (request_module("nfct-helper-%s", helpname) < 0) { + spin_lock_bh(&nf_conntrack_lock); err = -EOPNOTSUPP; goto err1; } + spin_lock_bh(&nf_conntrack_lock); rcu_read_lock(); helper = __nf_conntrack_helper_find(helpname, nf_ct_l3num(ct), @@ -1638,7 +1641,7 @@ ctnetlink_exp_dump_expect(struct sk_buff *skb, const struct nf_conntrack_expect *exp) { struct nf_conn *master = exp->master; - long timeout = (exp->timeout.expires - jiffies) / HZ; + long timeout = ((long)exp->timeout.expires - (long)jiffies) / HZ; struct nf_conn_help *help; if (timeout < 0) @@ -1869,25 +1872,30 @@ ctnetlink_get_expect(struct sock *ctnl, struct sk_buff *skb, err = -ENOMEM; skb2 = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); - if (skb2 == NULL) + if (skb2 == NULL) { + nf_ct_expect_put(exp); goto out; + } rcu_read_lock(); err = ctnetlink_exp_fill_info(skb2, NETLINK_CB(skb).pid, nlh->nlmsg_seq, IPCTNL_MSG_EXP_NEW, exp); rcu_read_unlock(); + nf_ct_expect_put(exp); if (err <= 0) goto free; - nf_ct_expect_put(exp); + err = netlink_unicast(ctnl, skb2, NETLINK_CB(skb).pid, MSG_DONTWAIT); + if (err < 0) + goto out; - return netlink_unicast(ctnl, skb2, NETLINK_CB(skb).pid, MSG_DONTWAIT); + return 0; free: kfree_skb(skb2); out: - nf_ct_expect_put(exp); - return err; + /* this avoids a loop in nfnetlink. */ + return err == -EAGAIN ? -ENOBUFS : err; } static int diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index 3891702b81df..d9d4970b9b07 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -2448,8 +2448,12 @@ static int packet_do_bind(struct sock *sk, struct net_device *dev, __be16 protoc { struct packet_sock *po = pkt_sk(sk); - if (po->fanout) + if (po->fanout) { + if (dev) + dev_put(dev); + return -EINVAL; + } lock_sock(sk); diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c index eb3b9a86c6ed..a4ab207cdc59 100644 --- a/net/sched/sch_netem.c +++ b/net/sched/sch_netem.c @@ -488,7 +488,7 @@ static int get_dist_table(struct Qdisc *sch, const struct nlattr *attr) return -EINVAL; s = sizeof(struct disttable) + n * sizeof(s16); - d = kmalloc(s, GFP_KERNEL); + d = kmalloc(s, GFP_KERNEL | __GFP_NOWARN); if (!d) d = vmalloc(s); if (!d) @@ -501,9 +501,10 @@ static int get_dist_table(struct Qdisc *sch, const struct nlattr *attr) root_lock = qdisc_root_sleeping_lock(sch); spin_lock_bh(root_lock); - dist_free(q->delay_dist); - q->delay_dist = d; + swap(q->delay_dist, d); spin_unlock_bh(root_lock); + + dist_free(d); return 0; } diff --git a/sound/soc/codecs/wm8776.c b/sound/soc/codecs/wm8776.c index bfdc52370ad0..d3b0a20744f1 100644 --- a/sound/soc/codecs/wm8776.c +++ b/sound/soc/codecs/wm8776.c @@ -235,6 +235,7 @@ static int wm8776_hw_params(struct snd_pcm_substream *substream, switch (snd_pcm_format_width(params_format(params))) { case 16: iface = 0; + break; case 20: iface = 0x10; break; diff --git a/virt/kvm/assigned-dev.c b/virt/kvm/assigned-dev.c index 3ad0925d23a9..758e3b36d4cf 100644 --- a/virt/kvm/assigned-dev.c +++ b/virt/kvm/assigned-dev.c @@ -17,6 +17,8 @@ #include <linux/pci.h> #include <linux/interrupt.h> #include <linux/slab.h> +#include <linux/namei.h> +#include <linux/fs.h> #include "irq.h" static struct kvm_assigned_dev_kernel *kvm_find_assigned_dev(struct list_head *head, @@ -480,12 +482,76 @@ out: return r; } +/* + * We want to test whether the caller has been granted permissions to + * use this device. To be able to configure and control the device, + * the user needs access to PCI configuration space and BAR resources. + * These are accessed through PCI sysfs. PCI config space is often + * passed to the process calling this ioctl via file descriptor, so we + * can't rely on access to that file. We can check for permissions + * on each of the BAR resource files, which is a pretty clear + * indicator that the user has been granted access to the device. + */ +static int probe_sysfs_permissions(struct pci_dev *dev) +{ +#ifdef CONFIG_SYSFS + int i; + bool bar_found = false; + + for (i = PCI_STD_RESOURCES; i <= PCI_STD_RESOURCE_END; i++) { + char *kpath, *syspath; + struct path path; + struct inode *inode; + int r; + + if (!pci_resource_len(dev, i)) + continue; + + kpath = kobject_get_path(&dev->dev.kobj, GFP_KERNEL); + if (!kpath) + return -ENOMEM; + + /* Per sysfs-rules, sysfs is always at /sys */ + syspath = kasprintf(GFP_KERNEL, "/sys%s/resource%d", kpath, i); + kfree(kpath); + if (!syspath) + return -ENOMEM; + + r = kern_path(syspath, LOOKUP_FOLLOW, &path); + kfree(syspath); + if (r) + return r; + + inode = path.dentry->d_inode; + + r = inode_permission(inode, MAY_READ | MAY_WRITE | MAY_ACCESS); + path_put(&path); + if (r) + return r; + + bar_found = true; + } + + /* If no resources, probably something special */ + if (!bar_found) + return -EPERM; + + return 0; +#else + return -EINVAL; /* No way to control the device without sysfs */ +#endif +} + static int kvm_vm_ioctl_assign_device(struct kvm *kvm, struct kvm_assigned_pci_dev *assigned_dev) { int r = 0, idx; struct kvm_assigned_dev_kernel *match; struct pci_dev *dev; + u8 header_type; + + if (!(assigned_dev->flags & KVM_DEV_ASSIGN_ENABLE_IOMMU)) + return -EINVAL; mutex_lock(&kvm->lock); idx = srcu_read_lock(&kvm->srcu); @@ -513,6 +579,18 @@ static int kvm_vm_ioctl_assign_device(struct kvm *kvm, r = -EINVAL; goto out_free; } + + /* Don't allow bridges to be assigned */ + pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type); + if ((header_type & PCI_HEADER_TYPE) != PCI_HEADER_TYPE_NORMAL) { + r = -EPERM; + goto out_put; + } + + r = probe_sysfs_permissions(dev); + if (r) + goto out_put; + if (pci_enable_device(dev)) { printk(KERN_INFO "%s: Could not enable PCI device\n", __func__); r = -EBUSY; @@ -544,16 +622,14 @@ static int kvm_vm_ioctl_assign_device(struct kvm *kvm, list_add(&match->list, &kvm->arch.assigned_dev_head); - if (assigned_dev->flags & KVM_DEV_ASSIGN_ENABLE_IOMMU) { - if (!kvm->arch.iommu_domain) { - r = kvm_iommu_map_guest(kvm); - if (r) - goto out_list_del; - } - r = kvm_assign_device(kvm, match); + if (!kvm->arch.iommu_domain) { + r = kvm_iommu_map_guest(kvm); if (r) goto out_list_del; } + r = kvm_assign_device(kvm, match); + if (r) + goto out_list_del; out: srcu_read_unlock(&kvm->srcu, idx); @@ -593,8 +669,7 @@ static int kvm_vm_ioctl_deassign_device(struct kvm *kvm, goto out; } - if (match->flags & KVM_DEV_ASSIGN_ENABLE_IOMMU) - kvm_deassign_device(kvm, match); + kvm_deassign_device(kvm, match); kvm_free_assigned_device(kvm, match); |