diff options
| -rw-r--r-- | Documentation/devicetree/bindings/net/fsl-tsec-phy.txt | 54 | ||||
| -rw-r--r-- | arch/powerpc/boot/dts/mpc8313erdb.dts | 13 | ||||
| -rw-r--r-- | arch/powerpc/boot/dts/mpc8572ds.dts | 13 | ||||
| -rw-r--r-- | arch/powerpc/boot/dts/p2020ds.dts | 13 | ||||
| -rw-r--r-- | arch/powerpc/boot/dts/p2020rdb.dts | 13 | ||||
| -rw-r--r-- | drivers/net/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/gianfar_ptp.c | 588 | ||||
| -rw-r--r-- | drivers/ptp/Kconfig | 13 |
8 files changed, 708 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt index edb7ae19e868..2c6be0377f55 100644 --- a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt +++ b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt @@ -74,3 +74,57 @@ Example: interrupt-parent = <&mpic>; phy-handle = <&phy0> }; + +* Gianfar PTP clock nodes + +General Properties: + + - compatible Should be "fsl,etsec-ptp" + - reg Offset and length of the register set for the device + - interrupts There should be at least two interrupts. Some devices + have as many as four PTP related interrupts. + +Clock Properties: + + - fsl,tclk-period Timer reference clock period in nanoseconds. + - fsl,tmr-prsc Prescaler, divides the output clock. + - fsl,tmr-add Frequency compensation value. + - fsl,tmr-fiper1 Fixed interval period pulse generator. + - fsl,tmr-fiper2 Fixed interval period pulse generator. + - fsl,max-adj Maximum frequency adjustment in parts per billion. + + These properties set the operational parameters for the PTP + clock. You must choose these carefully for the clock to work right. + Here is how to figure good values: + + TimerOsc = system clock MHz + tclk_period = desired clock period nanoseconds + NominalFreq = 1000 / tclk_period MHz + FreqDivRatio = TimerOsc / NominalFreq (must be greater that 1.0) + tmr_add = ceil(2^32 / FreqDivRatio) + OutputClock = NominalFreq / tmr_prsc MHz + PulseWidth = 1 / OutputClock microseconds + FiperFreq1 = desired frequency in Hz + FiperDiv1 = 1000000 * OutputClock / FiperFreq1 + tmr_fiper1 = tmr_prsc * tclk_period * FiperDiv1 - tclk_period + max_adj = 1000000000 * (FreqDivRatio - 1.0) - 1 + + The calculation for tmr_fiper2 is the same as for tmr_fiper1. The + driver expects that tmr_fiper1 will be correctly set to produce a 1 + Pulse Per Second (PPS) signal, since this will be offered to the PPS + subsystem to synchronize the Linux clock. + +Example: + + ptp_clock@24E00 { + compatible = "fsl,etsec-ptp"; + reg = <0x24E00 0xB0>; + interrupts = <12 0x8 13 0x8>; + interrupt-parent = < &ipic >; + fsl,tclk-period = <10>; + fsl,tmr-prsc = <100>; + fsl,tmr-add = <0x999999A4>; + fsl,tmr-fiper1 = <0x3B9AC9F6>; + fsl,tmr-fiper2 = <0x00018696>; + fsl,max-adj = <659999998>; + }; diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts index 761faa7b6964..ac1eb320c7b4 100644 --- a/arch/powerpc/boot/dts/mpc8313erdb.dts +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -176,6 +176,19 @@ sleep = <&pmc 0x00300000>; }; + ptp_clock@24E00 { + compatible = "fsl,etsec-ptp"; + reg = <0x24E00 0xB0>; + interrupts = <12 0x8 13 0x8>; + interrupt-parent = < &ipic >; + fsl,tclk-period = <10>; + fsl,tmr-prsc = <100>; + fsl,tmr-add = <0x999999A4>; + fsl,tmr-fiper1 = <0x3B9AC9F6>; + fsl,tmr-fiper2 = <0x00018696>; + fsl,max-adj = <659999998>; + }; + enet0: ethernet@24000 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts index cafc1285c140..f6c04d25e916 100644 --- a/arch/powerpc/boot/dts/mpc8572ds.dts +++ b/arch/powerpc/boot/dts/mpc8572ds.dts @@ -324,6 +324,19 @@ }; }; + ptp_clock@24E00 { + compatible = "fsl,etsec-ptp"; + reg = <0x24E00 0xB0>; + interrupts = <68 2 69 2 70 2 71 2>; + interrupt-parent = < &mpic >; + fsl,tclk-period = <5>; + fsl,tmr-prsc = <200>; + fsl,tmr-add = <0xAAAAAAAB>; + fsl,tmr-fiper1 = <0x3B9AC9FB>; + fsl,tmr-fiper2 = <0x3B9AC9FB>; + fsl,max-adj = <499999999>; + }; + enet0: ethernet@24000 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/powerpc/boot/dts/p2020ds.dts b/arch/powerpc/boot/dts/p2020ds.dts index 2bcf3683d223..dae403100f2f 100644 --- a/arch/powerpc/boot/dts/p2020ds.dts +++ b/arch/powerpc/boot/dts/p2020ds.dts @@ -178,6 +178,19 @@ }; + ptp_clock@24E00 { + compatible = "fsl,etsec-ptp"; + reg = <0x24E00 0xB0>; + interrupts = <68 2 69 2 70 2>; + interrupt-parent = < &mpic >; + fsl,tclk-period = <5>; + fsl,tmr-prsc = <200>; + fsl,tmr-add = <0xCCCCCCCD>; + fsl,tmr-fiper1 = <0x3B9AC9FB>; + fsl,tmr-fiper2 = <0x0001869B>; + fsl,max-adj = <249999999>; + }; + enet0: ethernet@24000 { tbi-handle = <&tbi0>; phy-handle = <&phy0>; diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/dts/p2020rdb.dts index 3782a58f13be..1d7a05f3021e 100644 --- a/arch/powerpc/boot/dts/p2020rdb.dts +++ b/arch/powerpc/boot/dts/p2020rdb.dts @@ -224,6 +224,19 @@ status = "disabled"; }; + ptp_clock@24E00 { + compatible = "fsl,etsec-ptp"; + reg = <0x24E00 0xB0>; + interrupts = <68 2 69 2 70 2>; + interrupt-parent = < &mpic >; + fsl,tclk-period = <5>; + fsl,tmr-prsc = <200>; + fsl,tmr-add = <0xCCCCCCCD>; + fsl,tmr-fiper1 = <0x3B9AC9FB>; + fsl,tmr-fiper2 = <0x0001869B>; + fsl,max-adj = <249999999>; + }; + enet0: ethernet@24000 { fixed-link = <1 1 1000 0 0>; phy-connection-type = "rgmii-id"; diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 209fbb70619b..776a478e6296 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_ATL2) += atlx/ obj-$(CONFIG_ATL1E) += atl1e/ obj-$(CONFIG_ATL1C) += atl1c/ obj-$(CONFIG_GIANFAR) += gianfar_driver.o +obj-$(CONFIG_PTP_1588_CLOCK_GIANFAR) += gianfar_ptp.o obj-$(CONFIG_TEHUTI) += tehuti.o obj-$(CONFIG_ENIC) += enic/ obj-$(CONFIG_JME) += jme.o diff --git a/drivers/net/gianfar_ptp.c b/drivers/net/gianfar_ptp.c new file mode 100644 index 000000000000..d8e175382d1d --- /dev/null +++ b/drivers/net/gianfar_ptp.c @@ -0,0 +1,588 @@ +/* + * PTP 1588 clock using the eTSEC + * + * Copyright (C) 2010 OMICRON electronics GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/device.h> +#include <linux/hrtimer.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/timex.h> +#include <linux/io.h> + +#include <linux/ptp_clock_kernel.h> + +#include "gianfar.h" + +/* + * gianfar ptp registers + * Generated by regen.tcl on Thu May 13 01:38:57 PM CEST 2010 + */ +struct gianfar_ptp_registers { + u32 tmr_ctrl; /* Timer control register */ + u32 tmr_tevent; /* Timestamp event register */ + u32 tmr_temask; /* Timer event mask register */ + u32 tmr_pevent; /* Timestamp event register */ + u32 tmr_pemask; /* Timer event mask register */ + u32 tmr_stat; /* Timestamp status register */ + u32 tmr_cnt_h; /* Timer counter high register */ + u32 tmr_cnt_l; /* Timer counter low register */ + u32 tmr_add; /* Timer drift compensation addend register */ + u32 tmr_acc; /* Timer accumulator register */ + u32 tmr_prsc; /* Timer prescale */ + u8 res1[4]; + u32 tmroff_h; /* Timer offset high */ + u32 tmroff_l; /* Timer offset low */ + u8 res2[8]; + u32 tmr_alarm1_h; /* Timer alarm 1 high register */ + u32 tmr_alarm1_l; /* Timer alarm 1 high register */ + u32 tmr_alarm2_h; /* Timer alarm 2 high register */ + u32 tmr_alarm2_l; /* Timer alarm 2 high register */ + u8 res3[48]; + u32 tmr_fiper1; /* Timer fixed period interval */ + u32 tmr_fiper2; /* Timer fixed period interval */ + u32 tmr_fiper3; /* Timer fixed period interval */ + u8 res4[20]; + u32 tmr_etts1_h; /* Timestamp of general purpose external trigger */ + u32 tmr_etts1_l; /* Timestamp of general purpose external trigger */ + u32 tmr_etts2_h; /* Timestamp of general purpose external trigger */ + u32 tmr_etts2_l; /* Timestamp of general purpose external trigger */ +}; + +/* Bit definitions for the TMR_CTRL register */ +#define ALM1P (1<<31) /* Alarm1 output polarity */ +#define ALM2P (1<<30) /* Alarm2 output polarity */ +#define FS (1<<28) /* FIPER start indication */ +#define PP1L (1<<27) /* Fiper1 pulse loopback mode enabled. */ +#define PP2L (1<<26) /* Fiper2 pulse loopback mode enabled. */ +#define TCLK_PERIOD_SHIFT (16) /* 1588 timer reference clock period. */ +#define TCLK_PERIOD_MASK (0x3ff) +#define RTPE (1<<15) /* Record Tx Timestamp to PAL Enable. */ +#define FRD (1<<14) /* FIPER Realignment Disable */ +#define ESFDP (1<<11) /* External Tx/Rx SFD Polarity. */ +#define ESFDE (1<<10) /* External Tx/Rx SFD Enable. */ +#define ETEP2 (1<<9) /* External trigger 2 edge polarity */ +#define ETEP1 (1<<8) /* External trigger 1 edge polarity */ +#define COPH (1<<7) /* Generated clock output phase. */ +#define CIPH (1<<6) /* External oscillator input clock phase */ +#define TMSR (1<<5) /* Timer soft reset. */ +#define BYP (1<<3) /* Bypass drift compensated clock */ +#define TE (1<<2) /* 1588 timer enable. */ +#define CKSEL_SHIFT (0) /* 1588 Timer reference clock source */ +#define CKSEL_MASK (0x3) + +/* Bit definitions for the TMR_TEVENT register */ +#define ETS2 (1<<25) /* External trigger 2 timestamp sampled */ +#define ETS1 (1<<24) /* External trigger 1 timestamp sampled */ +#define ALM2 (1<<17) /* Current time = alarm time register 2 */ +#define ALM1 (1<<16) /* Current time = alarm time register 1 */ +#define PP1 (1<<7) /* periodic pulse generated on FIPER1 */ +#define PP2 (1<<6) /* periodic pulse generated on FIPER2 */ +#define PP3 (1<<5) /* periodic pulse generated on FIPER3 */ + +/* Bit definitions for the TMR_TEMASK register */ +#define ETS2EN (1<<25) /* External trigger 2 timestamp enable */ +#define ETS1EN (1<<24) /* External trigger 1 timestamp enable */ +#define ALM2EN (1<<17) /* Timer ALM2 event enable */ +#define ALM1EN (1<<16) /* Timer ALM1 event enable */ +#define PP1EN (1<<7) /* Periodic pulse event 1 enable */ +#define PP2EN (1<<6) /* Periodic pulse event 2 enable */ + +/* Bit definitions for the TMR_PEVENT register */ +#define TXP2 (1<<9) /* PTP transmitted timestamp im TXTS2 */ +#define TXP1 (1<<8) /* PTP transmitted timestamp in TXTS1 */ +#define RXP (1<<0) /* PTP frame has been received */ + +/* Bit definitions for the TMR_PEMASK register */ +#define TXP2EN (1<<9) /* Transmit PTP packet event 2 enable */ +#define TXP1EN (1<<8) /* Transmit PTP packet event 1 enable */ +#define RXPEN (1<<0) /* Receive PTP packet event enable */ + +/* Bit definitions for the TMR_STAT register */ +#define STAT_VEC_SHIFT (0) /* Timer general purpose status vector */ +#define STAT_VEC_MASK (0x3f) + +/* Bit definitions for the TMR_PRSC register */ +#define PRSC_OCK_SHIFT (0) /* Output clock division/prescale factor. */ +#define PRSC_OCK_MASK (0xffff) + + +#define DRIVER "gianfar_ptp" +#define DEFAULT_CKSEL 1 +#define N_ALARM 1 /* first alarm is used internally to reset fipers */ +#define N_EXT_TS 2 +#define REG_SIZE sizeof(struct gianfar_ptp_registers) + +struct etsects { + struct gianfar_ptp_registers *regs; + spinlock_t lock; /* protects regs */ + struct ptp_clock *clock; + struct ptp_clock_info caps; + struct resource *rsrc; + int irq; + u64 alarm_interval; /* for periodic alarm */ + u64 alarm_value; + u32 tclk_period; /* nanoseconds */ + u32 tmr_prsc; + u32 tmr_add; + u32 cksel; + u32 tmr_fiper1; + u32 tmr_fiper2; +}; + +/* + * Register access functions + */ + +/* Caller must hold etsects->lock. */ +static u64 tmr_cnt_read(struct etsects *etsects) +{ + u64 ns; + u32 lo, hi; + + lo = gfar_read(&etsects->regs->tmr_cnt_l); + hi = gfar_read(&etsects->regs->tmr_cnt_h); + ns = ((u64) hi) << 32; + ns |= lo; + return ns; +} + +/* Caller must hold etsects->lock. */ +static void tmr_cnt_write(struct etsects *etsects, u64 ns) +{ + u32 hi = ns >> 32; + u32 lo = ns & 0xffffffff; + + gfar_write(&etsects->regs->tmr_cnt_l, lo); + gfar_write(&etsects->regs->tmr_cnt_h, hi); +} + +/* Caller must hold etsects->lock. */ +static void set_alarm(struct etsects *etsects) +{ + u64 ns; + u32 lo, hi; + + ns = tmr_cnt_read(etsects) + 1500000000ULL; + ns = div_u64(ns, 1000000000UL) * 1000000000ULL; + ns -= etsects->tclk_period; + hi = ns >> 32; + lo = ns & 0xffffffff; + gfar_write(&etsects->regs->tmr_alarm1_l, lo); + gfar_write(&etsects->regs->tmr_alarm1_h, hi); +} + +/* Caller must hold etsects->lock. */ +static void set_fipers(struct etsects *etsects) +{ + u32 tmr_ctrl = gfar_read(&etsects->regs->tmr_ctrl); + + gfar_write(&etsects->regs->tmr_ctrl, tmr_ctrl & (~TE)); + gfar_write(&etsects->regs->tmr_prsc, etsects->tmr_prsc); + gfar_write(&etsects->regs->tmr_fiper1, etsects->tmr_fiper1); + gfar_write(&etsects->regs->tmr_fiper2, etsects->tmr_fiper2); + set_alarm(etsects); + gfar_write(&etsects->regs->tmr_ctrl, tmr_ctrl|TE); +} + +/* + * Interrupt service routine + */ + +static irqreturn_t isr(int irq, void *priv) +{ + struct etsects *etsects = priv; + struct ptp_clock_event event; + u64 ns; + u32 ack = 0, lo, hi, mask, val; + + val = gfar_read(&etsects->regs->tmr_tevent); + + if (val & ETS1) { + ack |= ETS1; + hi = gfar_read(&etsects->regs->tmr_etts1_h); + lo = gfar_read(&etsects->regs->tmr_etts1_l); + event.type = PTP_CLOCK_EXTTS; + event.index = 0; + event.timestamp = ((u64) hi) << 32; + event.timestamp |= lo; + ptp_clock_event(etsects->clock, &event); + } + + if (val & ETS2) { + ack |= ETS2; + hi = gfar_read(&etsects->regs->tmr_etts2_h); + lo = gfar_read(&etsects->regs->tmr_etts2_l); + event.type = PTP_CLOCK_EXTTS; + event.index = 1; + event.timestamp = ((u64) hi) << 32; + event.timestamp |= lo; + ptp_clock_event(etsects->clock, &event); + } + + if (val & ALM2) { + ack |= ALM2; + if (etsects->alarm_value) { + event.type = PTP_CLOCK_ALARM; + event.index = 0; + event.timestamp = etsects->alarm_value; + ptp_clock_event(etsects->clock, &event); + } + if (etsects->alarm_interval) { + ns = etsects->alarm_value + etsects->alarm_interval; + hi = ns >> 32; + lo = ns & 0xffffffff; + spin_lock(&etsects->lock); + gfar_write(&etsects->regs->tmr_alarm2_l, lo); + gfar_write(&etsects->regs->tmr_alarm2_h, hi); + spin_unlock(&etsects->lock); + etsects->alarm_value = ns; + } else { + gfar_write(&etsects->regs->tmr_tevent, ALM2); + spin_lock(&etsects->lock); + mask = gfar_read(&etsects->regs->tmr_temask); + mask &= ~ALM2EN; + gfar_write(&etsects->regs->tmr_temask, mask); + spin_unlock(&etsects->lock); + etsects->alarm_value = 0; + etsects->alarm_interval = 0; + } + } + + if (val & PP1) { + ack |= PP1; + event.type = PTP_CLOCK_PPS; + ptp_clock_event(etsects->clock, &event); + } + + if (ack) { + gfar_write(&etsects->regs->tmr_tevent, ack); + return IRQ_HANDLED; + } else + return IRQ_NONE; +} + +/* + * PTP clock operations + */ + +static int ptp_gianfar_adjfreq(struct ptp_clock_info *ptp, s32 ppb) +{ + u64 adj; + u32 diff, tmr_add; + int neg_adj = 0; + struct etsects *etsects = container_of(ptp, struct etsects, caps); + + if (ppb < 0) { + neg_adj = 1; + ppb = -ppb; + } + tmr_add = etsects->tmr_add; + adj = tmr_add; + adj *= ppb; + diff = div_u64(adj, 1000000000ULL); + + tmr_add = neg_adj ? tmr_add - diff : tmr_add + diff; + + gfar_write(&etsects->regs->tmr_add, tmr_add); + + return 0; +} + +static int ptp_gianfar_adjtime(struct ptp_clock_info *ptp, s64 delta) +{ + s64 now; + unsigned long flags; + struct etsects *etsects = container_of(ptp, struct etsects, caps); + + spin_lock_irqsave(&etsects->lock, flags); + + now = tmr_cnt_read(etsects); + now += delta; + tmr_cnt_write(etsects, now); + + spin_unlock_irqrestore(&etsects->lock, flags); + + set_fipers(etsects); + + return 0; +} + +static int ptp_gianfar_gettime(struct ptp_clock_info *ptp, struct timespec *ts) +{ + u64 ns; + u32 remainder; + unsigned long flags; + struct etsects *etsects = container_of(ptp, struct etsects, caps); + + spin_lock_irqsave(&etsects->lock, flags); + + ns = tmr_cnt_read(etsects); + + spin_unlock_irqrestore(&etsects->lock, flags); + + ts->tv_sec = div_u64_rem(ns, 1000000000, &remainder); + ts->tv_nsec = remainder; + return 0; +} + +static int ptp_gianfar_settime(struct ptp_clock_info *ptp, + const struct timespec *ts) +{ + u64 ns; + unsigned long flags; + struct etsects *etsects = container_of(ptp, struct etsects, caps); + + ns = ts->tv_sec * 1000000000ULL; + ns += ts->tv_nsec; + + spin_lock_irqsave(&etsects->lock, flags); + + tmr_cnt_write(etsects, ns); + set_fipers(etsects); + + spin_unlock_irqrestore(&etsects->lock, flags); + + return 0; +} + +static int ptp_gianfar_enable(struct ptp_clock_info *ptp, + struct ptp_clock_request *rq, int on) +{ + struct etsects *etsects = container_of(ptp, struct etsects, caps); + unsigned long flags; + u32 bit, mask; + + switch (rq->type) { + case PTP_CLK_REQ_EXTTS: + switch (rq->extts.index) { + case 0: + bit = ETS1EN; + break; + case 1: + bit = ETS2EN; + break; + default: + return -EINVAL; + } + spin_lock_irqsave(&etsects->lock, flags); + mask = gfar_read(&etsects->regs->tmr_temask); + if (on) + mask |= bit; + else + mask &= ~bit; + gfar_write(&etsects->regs->tmr_temask, mask); + spin_unlock_irqrestore(&etsects->lock, flags); + return 0; + + case PTP_CLK_REQ_PPS: + spin_lock_irqsave(&etsects->lock, flags); + mask = gfar_read(&etsects->regs->tmr_temask); + if (on) + mask |= PP1EN; + else + mask &= ~PP1EN; + gfar_write(&etsects->regs->tmr_temask, mask); + spin_unlock_irqrestore(&etsects->lock, flags); + return 0; + + default: + break; + } + + return -EOPNOTSUPP; +} + +static struct ptp_clock_info ptp_gianfar_caps = { + .owner = THIS_MODULE, + .name = "gianfar clock", + .max_adj = 512000, + .n_alarm = N_ALARM, + .n_ext_ts = N_EXT_TS, + .n_per_out = 0, + .pps = 1, + .adjfreq = ptp_gianfar_adjfreq, + .adjtime = ptp_gianfar_adjtime, + .gettime = ptp_gianfar_gettime, + .settime = ptp_gianfar_settime, + .enable = ptp_gianfar_enable, +}; + +/* OF device tree */ + +static int get_of_u32(struct device_node *node, char *str, u32 *val) +{ + int plen; + const u32 *prop = of_get_property(node, str, &plen); + + if (!prop || plen != sizeof(*prop)) + return -1; + *val = *prop; + return 0; +} + +static int gianfar_ptp_probe(struct platform_device *dev) +{ + struct device_node *node = dev->dev.of_node; + struct etsects *etsects; + struct timespec now; + int err = -ENOMEM; + u32 tmr_ctrl; + unsigned long flags; + + etsects = kzalloc(sizeof(*etsects), GFP_KERNEL); + if (!etsects) + goto no_memory; + + err = -ENODEV; + + etsects->caps = ptp_gianfar_caps; + etsects->cksel = DEFAULT_CKSEL; + + if (get_of_u32(node, "fsl,tclk-period", &etsects->tclk_period) || + get_of_u32(node, "fsl,tmr-prsc", &etsects->tmr_prsc) || + get_of_u32(node, "fsl,tmr-add", &etsects->tmr_add) || + get_of_u32(node, "fsl,tmr-fiper1", &etsects->tmr_fiper1) || + get_of_u32(node, "fsl,tmr-fiper2", &etsects->tmr_fiper2) || + get_of_u32(node, "fsl,max-adj", &etsects->caps.max_adj)) { + pr_err("device tree node missing required elements\n"); + goto no_node; + } + + etsects->irq = platform_get_irq(dev, 0); + + if (etsects->irq == NO_IRQ) { + pr_err("irq not in device tree\n"); + goto no_node; + } + if (request_irq(etsects->irq, isr, 0, DRIVER, etsects)) { + pr_err("request_irq failed\n"); + goto no_node; + } + + etsects->rsrc = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!etsects->rsrc) { + pr_err("no resource\n"); + goto no_resource; + } + if (request_resource(&ioport_resource, etsects->rsrc)) { + pr_err("resource busy\n"); + goto no_resource; + } + + spin_lock_init(&etsects->lock); + + etsects->regs = ioremap(etsects->rsrc->start, + 1 + etsects->rsrc->end - etsects->rsrc->start); + if (!etsects->regs) { + pr_err("ioremap ptp registers failed\n"); + goto no_ioremap; + } + getnstimeofday(&now); + ptp_gianfar_settime(&etsects->caps, &now); + + tmr_ctrl = + (etsects->tclk_period & TCLK_PERIOD_MASK) << TCLK_PERIOD_SHIFT | + (etsects->cksel & CKSEL_MASK) << CKSEL_SHIFT; + + spin_lock_irqsave(&etsects->lock, flags); + + gfar_write(&etsects->regs->tmr_ctrl, tmr_ctrl); + gfar_write(&etsects->regs->tmr_add, etsects->tmr_add); + gfar_write(&etsects->regs->tmr_prsc, etsects->tmr_prsc); + gfar_write(&etsects->regs->tmr_fiper1, etsects->tmr_fiper1); + gfar_write(&etsects->regs->tmr_fiper2, etsects->tmr_fiper2); + set_alarm(etsects); + gfar_write(&etsects->regs->tmr_ctrl, tmr_ctrl|FS|RTPE|TE); + + spin_unlock_irqrestore(&etsects->lock, flags); + + etsects->clock = ptp_clock_register(&etsects->caps); + if (IS_ERR(etsects->clock)) { + err = PTR_ERR(etsects->clock); + goto no_clock; + } + + dev_set_drvdata(&dev->dev, etsects); + + return 0; + +no_clock: +no_ioremap: + release_resource(etsects->rsrc); +no_resource: + free_irq(etsects->irq, etsects); +no_node: + kfree(etsects); +no_memory: + return err; +} + +static int gianfar_ptp_remove(struct platform_device *dev) +{ + struct etsects *etsects = dev_get_drvdata(&dev->dev); + + gfar_write(&etsects->regs->tmr_temask, 0); + gfar_write(&etsects->regs->tmr_ctrl, 0); + + ptp_clock_unregister(etsects->clock); + iounmap(etsects->regs); + release_resource(etsects->rsrc); + free_irq(etsects->irq, etsects); + kfree(etsects); + + return 0; +} + +static struct of_device_id match_table[] = { + { .compatible = "fsl,etsec-ptp" }, + {}, +}; + +static struct platform_driver gianfar_ptp_driver = { + .driver = { + .name = "gianfar_ptp", + .of_match_table = match_table, + .owner = THIS_MODULE, + }, + .probe = gianfar_ptp_probe, + .remove = gianfar_ptp_remove, +}; + +/* module operations */ + +static int __init ptp_gianfar_init(void) +{ + return platform_driver_register(&gianfar_ptp_driver); +} + +module_init(ptp_gianfar_init); + +static void __exit ptp_gianfar_exit(void) +{ + platform_driver_unregister(&gianfar_ptp_driver); +} + +module_exit(ptp_gianfar_exit); + +MODULE_AUTHOR("Richard Cochran <richard.cochran@omicron.at>"); +MODULE_DESCRIPTION("PTP clock using the eTSEC"); +MODULE_LICENSE("GPL"); diff --git a/drivers/ptp/Kconfig b/drivers/ptp/Kconfig index 70d4bb1cbdab..12eb8447c26b 100644 --- a/drivers/ptp/Kconfig +++ b/drivers/ptp/Kconfig @@ -27,4 +27,17 @@ config PTP_1588_CLOCK To compile this driver as a module, choose M here: the module will be called ptp. +config PTP_1588_CLOCK_GIANFAR + tristate "Freescale eTSEC as PTP clock" + depends on PTP_1588_CLOCK + depends on GIANFAR + help + This driver adds support for using the eTSEC as a PTP + clock. This clock is only useful if your PTP programs are + getting hardware time stamps on the PTP Ethernet packets + using the SO_TIMESTAMPING API. + + To compile this driver as a module, choose M here: the module + will be called gianfar_ptp. + endmenu |