diff options
| -rw-r--r-- | Documentation/devicetree/bindings/net/marvell-orion-mdio.txt | 19 | ||||
| -rw-r--r-- | drivers/net/ethernet/marvell/mvmdio.c | 44 |
2 files changed, 50 insertions, 13 deletions
diff --git a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt index 9417e54c26c0..ccdabdcc8618 100644 --- a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt +++ b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt @@ -7,17 +7,20 @@ interface. Required properties: - compatible: "marvell,orion-mdio" -- reg: address and length of the SMI register +- reg: address and length of the MDIO registers. When an interrupt is + not present, the length is the size of the SMI register (4 bytes) + otherwise it must be 0x84 bytes to cover the interrupt control + registers. Optional properties: - interrupts: interrupt line number for the SMI error/done interrupt -- clocks: Phandle to the clock control device and gate bit +- clocks: phandle for up to three required clocks for the MDIO instance The child nodes of the MDIO driver are the individual PHY devices connected to this MDIO bus. They must have a "reg" property given the PHY address on the MDIO bus. -Example at the SoC level: +Example at the SoC level without an interrupt property: mdio { #address-cells = <1>; @@ -26,6 +29,16 @@ mdio { reg = <0xd0072004 0x4>; }; +Example with an interrupt property: + +mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,orion-mdio"; + reg = <0xd0072004 0x84>; + interrupts = <30>; +}; + And at the board level: mdio { diff --git a/drivers/net/ethernet/marvell/mvmdio.c b/drivers/net/ethernet/marvell/mvmdio.c index a0d1b084ecec..90a60b98c28e 100644 --- a/drivers/net/ethernet/marvell/mvmdio.c +++ b/drivers/net/ethernet/marvell/mvmdio.c @@ -53,7 +53,7 @@ struct orion_mdio_dev { struct mutex lock; void __iomem *regs; - struct clk *clk; + struct clk *clk[3]; /* * If we have access to the error interrupt pin (which is * somewhat misnamed as it not only reflects internal errors @@ -187,7 +187,7 @@ static int orion_mdio_probe(struct platform_device *pdev) struct resource *r; struct mii_bus *bus; struct orion_mdio_dev *dev; - int ret; + int i, ret; r = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!r) { @@ -216,11 +216,20 @@ static int orion_mdio_probe(struct platform_device *pdev) init_waitqueue_head(&dev->smi_busy_wait); - dev->clk = devm_clk_get(&pdev->dev, NULL); - if (!IS_ERR(dev->clk)) - clk_prepare_enable(dev->clk); + for (i = 0; i < ARRAY_SIZE(dev->clk); i++) { + dev->clk[i] = of_clk_get(pdev->dev.of_node, i); + if (IS_ERR(dev->clk[i])) + break; + clk_prepare_enable(dev->clk[i]); + } dev->err_interrupt = platform_get_irq(pdev, 0); + if (dev->err_interrupt > 0 && + resource_size(r) < MVMDIO_ERR_INT_MASK + 4) { + dev_err(&pdev->dev, + "disabling interrupt, resource size is too small\n"); + dev->err_interrupt = 0; + } if (dev->err_interrupt > 0) { ret = devm_request_irq(&pdev->dev, dev->err_interrupt, orion_mdio_err_irq, @@ -251,8 +260,16 @@ static int orion_mdio_probe(struct platform_device *pdev) return 0; out_mdio: - if (!IS_ERR(dev->clk)) - clk_disable_unprepare(dev->clk); + if (dev->err_interrupt > 0) + writel(0, dev->regs + MVMDIO_ERR_INT_MASK); + + for (i = 0; i < ARRAY_SIZE(dev->clk); i++) { + if (IS_ERR(dev->clk[i])) + break; + clk_disable_unprepare(dev->clk[i]); + clk_put(dev->clk[i]); + } + return ret; } @@ -260,11 +277,18 @@ static int orion_mdio_remove(struct platform_device *pdev) { struct mii_bus *bus = platform_get_drvdata(pdev); struct orion_mdio_dev *dev = bus->priv; + int i; - writel(0, dev->regs + MVMDIO_ERR_INT_MASK); + if (dev->err_interrupt > 0) + writel(0, dev->regs + MVMDIO_ERR_INT_MASK); mdiobus_unregister(bus); - if (!IS_ERR(dev->clk)) - clk_disable_unprepare(dev->clk); + + for (i = 0; i < ARRAY_SIZE(dev->clk); i++) { + if (IS_ERR(dev->clk[i])) + break; + clk_disable_unprepare(dev->clk[i]); + clk_put(dev->clk[i]); + } return 0; } |