diff options
311 files changed, 6522 insertions, 1741 deletions
diff --git a/Documentation/devicetree/bindings/chosen.txt b/Documentation/devicetree/bindings/chosen.txt index ed838f453f7a..6ae9d82d4c37 100644 --- a/Documentation/devicetree/bindings/chosen.txt +++ b/Documentation/devicetree/bindings/chosen.txt @@ -44,3 +44,11 @@ Implementation note: Linux will look for the property "linux,stdout-path" or on PowerPC "stdout" if "stdout-path" is not found. However, the "linux,stdout-path" and "stdout" properties are deprecated. New platforms should only use the "stdout-path" property. + +linux,booted-from-kexec +----------------------- + +This property is set (currently only on PowerPC, and only needed on +book3e) by some versions of kexec-tools to tell the new kernel that it +is being booted by kexec, as the booting environment may differ (e.g. +a different secondary CPU release mechanism) diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt index df4a259a6898..16a3ec433119 100644 --- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt +++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt @@ -1,6 +1,6 @@ * Clock Block on Freescale QorIQ Platforms -Freescale qoriq chips take primary clocking input from the external +Freescale QorIQ chips take primary clocking input from the external SYSCLK signal. The SYSCLK input (frequency) is multiplied using multiple phase locked loops (PLL) to create a variety of frequencies which can then be passed to a variety of internal logic, including @@ -13,14 +13,16 @@ which the chip complies. Chassis Version Example Chips --------------- ------------- 1.0 p4080, p5020, p5040 -2.0 t4240, b4860, t1040 +2.0 t4240, b4860 1. Clock Block Binding Required properties: -- compatible: Should contain a specific clock block compatible string - and a single chassis clock compatible string. - Clock block strings include, but not limited to, one of the: +- compatible: Should contain a chip-specific clock block compatible + string and (if applicable) may contain a chassis-version clock + compatible string. + + Chip-specific strings are of the form "fsl,<chip>-clockgen", such as: * "fsl,p2041-clockgen" * "fsl,p3041-clockgen" * "fsl,p4080-clockgen" @@ -30,15 +32,14 @@ Required properties: * "fsl,b4420-clockgen" * "fsl,b4860-clockgen" * "fsl,ls1021a-clockgen" - Chassis clock strings include: + Chassis-version clock strings include: * "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks * "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks - reg: Describes the address of the device's resources within the address space defined by its parent bus, and resource zero represents the clock register set -- clock-frequency: Input system clock frequency -Recommended properties: +Optional properties: - ranges: Allows valid translation between child's address space and parent's. Must be present if the device has sub-nodes. - #address-cells: Specifies the number of cells used to represent @@ -47,8 +48,46 @@ Recommended properties: - #size-cells: Specifies the number of cells used to represent the size of an address. Must be present if the device has sub-nodes and set to 1 if present +- clock-frequency: Input system clock frequency (SYSCLK) +- clocks: If clock-frequency is not specified, sysclk may be provided + as an input clock. Either clock-frequency or clocks must be + provided. + +2. Clock Provider + +The clockgen node should act as a clock provider, though in older device +trees the children of the clockgen node are the clock providers. + +When the clockgen node is a clock provider, #clock-cells = <2>. +The first cell of the clock specifier is the clock type, and the +second cell is the clock index for the specified type. + + Type# Name Index Cell + 0 sysclk must be 0 + 1 cmux index (n in CLKCnCSR) + 2 hwaccel index (n in CLKCGnHWACSR) + 3 fman 0 for fm1, 1 for fm2 + 4 platform pll 0=pll, 1=pll/2, 2=pll/3, 3=pll/4 + +3. Example + + clockgen: global-utilities@e1000 { + compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0"; + clock-frequency = <133333333>; + reg = <0xe1000 0x1000>; + #clock-cells = <2>; + }; + + fman@400000 { + ... + clocks = <&clockgen 3 0>; + ... + }; +} +4. Legacy Child Nodes -2. Clock Provider/Consumer Binding +NOTE: These nodes are deprecated. Kernels should continue to support +device trees with these nodes, but new device trees should not use them. Most of the bindings are from the common clock binding[1]. [1] Documentation/devicetree/bindings/clock/clock-bindings.txt @@ -82,7 +121,7 @@ Recommended properties: - reg: Should be the offset and length of clock block base address. The length should be 4. -Example for clock block and clock provider: +Legacy Example: / { clockgen: global-utilities@e1000 { compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0"; @@ -142,7 +181,7 @@ Example for clock block and clock provider: }; }; -Example for clock consumer: +Example for legacy clock consumer: / { cpu0: PowerPC,e5500@0 { diff --git a/Documentation/devicetree/bindings/net/maxim,ds26522.txt b/Documentation/devicetree/bindings/net/maxim,ds26522.txt new file mode 100644 index 000000000000..ee8bb725f245 --- /dev/null +++ b/Documentation/devicetree/bindings/net/maxim,ds26522.txt @@ -0,0 +1,13 @@ +* Maxim (Dallas) DS26522 Dual T1/E1/J1 Transceiver + +Required properties: +- compatible: Should contain "maxim,ds26522". +- reg: SPI CS. +- spi-max-frequency: SPI clock. + +Example: + slic@1 { + compatible = "maxim,ds26522"; + reg = <1>; + spi-max-frequency = <2000000>; /* input clock */ + }; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpc512x_lpbfifo.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpc512x_lpbfifo.txt new file mode 100644 index 000000000000..b3b392fe1f61 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/mpc512x_lpbfifo.txt @@ -0,0 +1,21 @@ +Freescale MPC512x LocalPlus Bus FIFO (called SCLPC in the Reference Manual) + +Required properties: +- compatible: should be "fsl,mpc512x-lpbfifo"; +- reg: should contain the offset and length of SCLPC register set; +- interrupts: should contain the interrupt specifier for SCLPC; syntax of an + interrupt client node is described in interrupt-controller/interrupts.txt; +- dmas: should contain the DMA specifier for SCLPC as described at + dma/dma.txt and dma/mpc512x-dma.txt; +- dma-names: should be "rx-tx"; + +Example: + + sclpc@10100 { + compatible = "fsl,mpc512x-lpbfifo"; + reg = <0x10100 0x50>; + interrupts = <7 0x8>; + dmas = <&dma0 26>; + dma-names = "rx-tx"; + }; + diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 9a7057ec2154..db49e0d796b1 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -419,7 +419,7 @@ config PPC64_SUPPORTS_MEMORY_FAILURE config KEXEC bool "kexec system call" - depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP)) + depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP)) || PPC_BOOK3E select KEXEC_CORE help kexec is a system call that implements the ability to shutdown your diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index b9b4af2af9a5..96efd8213c1c 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -157,8 +157,6 @@ CFLAGS-$(CONFIG_E500) += $(call cc-option,-mcpu=8540 -msoft-float,-mcpu=powerpc) endif endif -CFLAGS-$(CONFIG_TUNE_CELL) += $(call cc-option,-mtune=cell) - asinstr := $(call as-instr,lis 9$(comma)foo@high,-DHAVE_AS_ATHIGH=1) KBUILD_CPPFLAGS += -Iarch/$(ARCH) $(asinstr) @@ -288,6 +286,10 @@ PHONY += pseries_le_defconfig pseries_le_defconfig: $(call merge_into_defconfig,pseries_defconfig,le) +PHONY += ppc64le_defconfig +ppc64le_defconfig: + $(call merge_into_defconfig,ppc64_defconfig,le) + PHONY += mpc85xx_defconfig mpc85xx_defconfig: $(call merge_into_defconfig,mpc85xx_basic_defconfig,\ diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 4eec430d8fa8..99e4487248ff 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -364,6 +364,9 @@ $(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) $(obj)/cuImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb) +$(obj)/cuImage.%: vmlinux $(obj)/fsl/%.dtb $(wrapperbits) + $(call if_changed,wrap,cuboot-$*,,$(obj)/fsl/$*.dtb) + $(obj)/simpleImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) $(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz) diff --git a/arch/powerpc/boot/dts/b4420qds.dts b/arch/powerpc/boot/dts/fsl/b4420qds.dts index 508dbdf33c81..cd9203ceedc0 100644 --- a/arch/powerpc/boot/dts/b4420qds.dts +++ b/arch/powerpc/boot/dts/fsl/b4420qds.dts @@ -32,7 +32,7 @@ * this software, even if advised of the possibility of such damage. */ -/include/ "fsl/b4420si-pre.dtsi" +/include/ "b4420si-pre.dtsi" /include/ "b4qds.dtsi" / { @@ -47,4 +47,4 @@ }; -/include/ "fsl/b4420si-post.dtsi" +/include/ "b4420si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi index 1ea8602e4345..f996cced45e0 100644 --- a/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi @@ -89,7 +89,9 @@ compatible = "fsl,b4420-rcpm", "fsl,qoriq-rcpm-2.0"; }; - L2: l2-cache-controller@c20000 { + L2_1: l2-cache-controller@c20000 { compatible = "fsl,b4420-l2-cache-controller"; + reg = <0xc20000 0x40000>; + next-level-cache = <&cpc>; }; }; diff --git a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi index 338af7e39dd9..bc3bf9333dde 100644 --- a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi @@ -1,7 +1,7 @@ /* * B4420 Silicon/SoC Device Tree Source (pre include) * - * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2012 - 2015 Freescale Semiconductor, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -54,8 +54,13 @@ dma0 = &dma0; dma1 = &dma1; sdhc = &sdhc; - }; + fman0 = &fman0; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + }; cpus { #address-cells = <1>; @@ -65,14 +70,14 @@ device_type = "cpu"; reg = <0 1>; clocks = <&mux0>; - next-level-cache = <&L2>; + next-level-cache = <&L2_1>; fsl,portid-mapping = <0x80000000>; }; cpu1: PowerPC,e6500@2 { device_type = "cpu"; reg = <2 3>; clocks = <&mux0>; - next-level-cache = <&L2>; + next-level-cache = <&L2_1>; fsl,portid-mapping = <0x80000000>; }; }; diff --git a/arch/powerpc/boot/dts/b4860qds.dts b/arch/powerpc/boot/dts/fsl/b4860qds.dts index 6bb3707ffe3d..ba8c9bea33ac 100644 --- a/arch/powerpc/boot/dts/b4860qds.dts +++ b/arch/powerpc/boot/dts/fsl/b4860qds.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/b4860si-pre.dtsi" +/include/ "b4860si-pre.dtsi" /include/ "b4qds.dtsi" / { @@ -58,4 +58,4 @@ }; -/include/ "fsl/b4860si-post.dtsi" +/include/ "b4860si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi index 9ba904be39ee..868719821106 100644 --- a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi @@ -1,7 +1,7 @@ /* * B4860 Silicon/SoC Device Tree Source (post include) * - * Copyright 2012 - 2014 Freescale Semiconductor Inc. + * Copyright 2012 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -51,14 +51,12 @@ #address-cells = <2>; #size-cells = <2>; cell-index = <1>; - fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */ }; port2 { #address-cells = <2>; #size-cells = <2>; cell-index = <2>; - fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */ }; }; @@ -260,7 +258,27 @@ compatible = "fsl,b4860-rcpm", "fsl,qoriq-rcpm-2.0"; }; - L2: l2-cache-controller@c20000 { +/include/ "qoriq-fman3-0-1g-4.dtsi" +/include/ "qoriq-fman3-0-1g-5.dtsi" +/include/ "qoriq-fman3-0-10g-0.dtsi" +/include/ "qoriq-fman3-0-10g-1.dtsi" + fman@400000 { + enet4: ethernet@e8000 { + }; + + enet5: ethernet@ea000 { + }; + + enet6: ethernet@f0000 { + }; + + enet7: ethernet@f2000 { + }; + }; + + L2_1: l2-cache-controller@c20000 { compatible = "fsl,b4860-l2-cache-controller"; + reg = <0xc20000 0x40000>; + next-level-cache = <&cpc>; }; }; diff --git a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi index 1948f73fd26b..8797ce146512 100644 --- a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi @@ -1,7 +1,7 @@ /* * B4860 Silicon/SoC Device Tree Source (pre include) * - * Copyright 2012 Freescale Semiconductor Inc. + * Copyright 2012 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -54,6 +54,16 @@ dma0 = &dma0; dma1 = &dma1; sdhc = &sdhc; + + fman0 = &fman0; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; + ethernet5 = &enet5; + ethernet6 = &enet6; + ethernet7 = &enet7; }; @@ -65,28 +75,28 @@ device_type = "cpu"; reg = <0 1>; clocks = <&mux0>; - next-level-cache = <&L2>; + next-level-cache = <&L2_1>; fsl,portid-mapping = <0x80000000>; }; cpu1: PowerPC,e6500@2 { device_type = "cpu"; reg = <2 3>; clocks = <&mux0>; - next-level-cache = <&L2>; + next-level-cache = <&L2_1>; fsl,portid-mapping = <0x80000000>; }; cpu2: PowerPC,e6500@4 { device_type = "cpu"; reg = <4 5>; clocks = <&mux0>; - next-level-cache = <&L2>; + next-level-cache = <&L2_1>; fsl,portid-mapping = <0x80000000>; }; cpu3: PowerPC,e6500@6 { device_type = "cpu"; reg = <6 7>; clocks = <&mux0>; - next-level-cache = <&L2>; + next-level-cache = <&L2_1>; fsl,portid-mapping = <0x80000000>; }; }; diff --git a/arch/powerpc/boot/dts/b4qds.dtsi b/arch/powerpc/boot/dts/fsl/b4qds.dtsi index 559d00657fb5..64557742fb99 100644 --- a/arch/powerpc/boot/dts/b4qds.dtsi +++ b/arch/powerpc/boot/dts/fsl/b4qds.dtsi @@ -229,4 +229,4 @@ }; -/include/ "fsl/b4si-post.dtsi" +/include/ "b4si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi index 603910ac1db0..74866ac52f39 100644 --- a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi @@ -1,7 +1,7 @@ /* * B4420 Silicon/SoC Device Tree Source (post include) * - * Copyright 2012 - 2014 Freescale Semiconductor, Inc. + * Copyright 2012 - 2015 Freescale Semiconductor, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -466,9 +466,32 @@ interrupts = <16 2 1 29>; }; - L2: l2-cache-controller@c20000 { - compatible = "fsl,b4-l2-cache-controller"; - reg = <0xc20000 0x1000>; - next-level-cache = <&cpc>; +/include/ "qoriq-fman3-0.dtsi" +/include/ "qoriq-fman3-0-1g-0.dtsi" +/include/ "qoriq-fman3-0-1g-1.dtsi" +/include/ "qoriq-fman3-0-1g-2.dtsi" +/include/ "qoriq-fman3-0-1g-3.dtsi" + fman@400000 { + interrupts = <96 2 0 0>, <16 2 1 30>; + + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + + mdio@fc000 { + interrupts = <100 1 0 0>; + }; + + mdio@fd000 { + interrupts = <101 1 0 0>; + }; }; }; diff --git a/arch/powerpc/boot/dts/bsc9131rdb.dts b/arch/powerpc/boot/dts/fsl/bsc9131rdb.dts index e13d2d4877b0..26366e6ff657 100644 --- a/arch/powerpc/boot/dts/bsc9131rdb.dts +++ b/arch/powerpc/boot/dts/fsl/bsc9131rdb.dts @@ -9,7 +9,7 @@ * option) any later version. */ -/include/ "fsl/bsc9131si-pre.dtsi" +/include/ "bsc9131si-pre.dtsi" / { model = "fsl,bsc9131rdb"; @@ -31,4 +31,4 @@ }; /include/ "bsc9131rdb.dtsi" -/include/ "fsl/bsc9131si-post.dtsi" +/include/ "bsc9131si-post.dtsi" diff --git a/arch/powerpc/boot/dts/bsc9131rdb.dtsi b/arch/powerpc/boot/dts/fsl/bsc9131rdb.dtsi index 45efcbadb23c..f4d96d277ed5 100644 --- a/arch/powerpc/boot/dts/bsc9131rdb.dtsi +++ b/arch/powerpc/boot/dts/fsl/bsc9131rdb.dtsi @@ -80,6 +80,18 @@ status = "disabled"; }; + ptp_clock@b0e00 { + compatible = "fsl,etsec-ptp"; + reg = <0xb0e00 0xb0>; + interrupts = <68 2 0 0 69 2 0 0>; + fsl,tclk-period = <5>; + fsl,tmr-prsc = <2>; + fsl,tmr-add = <0xcccccccd>; + fsl,tmr-fiper1 = <999999995>; + fsl,tmr-fiper2 = <99990>; + fsl,max-adj = <249999999>; + }; + enet0: ethernet@b0000 { phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; diff --git a/arch/powerpc/boot/dts/bsc9132qds.dts b/arch/powerpc/boot/dts/fsl/bsc9132qds.dts index 6cab1062bc74..70882ade606d 100644 --- a/arch/powerpc/boot/dts/bsc9132qds.dts +++ b/arch/powerpc/boot/dts/fsl/bsc9132qds.dts @@ -9,7 +9,7 @@ * option) any later version. */ -/include/ "fsl/bsc9132si-pre.dtsi" +/include/ "bsc9132si-pre.dtsi" / { model = "fsl,bsc9132qds"; @@ -32,4 +32,4 @@ }; /include/ "bsc9132qds.dtsi" -/include/ "fsl/bsc9132si-post.dtsi" +/include/ "bsc9132si-post.dtsi" diff --git a/arch/powerpc/boot/dts/bsc9132qds.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132qds.dtsi index af8e88830221..7a13bf2aa439 100644 --- a/arch/powerpc/boot/dts/bsc9132qds.dtsi +++ b/arch/powerpc/boot/dts/fsl/bsc9132qds.dtsi @@ -87,6 +87,18 @@ }; }; + ptp_clock@b0e00 { + compatible = "fsl,etsec-ptp"; + reg = <0xb0e00 0xb0>; + interrupts = <68 2 0 0 69 2 0 0>; + fsl,tclk-period = <5>; + fsl,tmr-prsc = <2>; + fsl,tmr-add = <0xcccccccd>; + fsl,tmr-fiper1 = <999999995>; + fsl,tmr-fiper2 = <99990>; + fsl,max-adj = <249999999>; + }; + enet0: ethernet@b0000 { phy-handle = <&phy0>; tbi-handle = <&tbi0>; diff --git a/arch/powerpc/boot/dts/c293pcie.dts b/arch/powerpc/boot/dts/fsl/c293pcie.dts index 6681cc21030b..53ab4db9e79c 100644 --- a/arch/powerpc/boot/dts/c293pcie.dts +++ b/arch/powerpc/boot/dts/fsl/c293pcie.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/c293si-pre.dtsi" +/include/ "c293si-pre.dtsi" / { model = "fsl,C293PCIE"; @@ -221,4 +221,4 @@ phy-connection-type = "rgmii-id"; }; }; -/include/ "fsl/c293si-post.dtsi" +/include/ "c293si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/cyrus_p5020.dts b/arch/powerpc/boot/dts/fsl/cyrus_p5020.dts new file mode 100644 index 000000000000..c6033909db60 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/cyrus_p5020.dts @@ -0,0 +1,155 @@ +/* + * Cyrus 5020 Device Tree Source, based on p5020ds.dts + * + * Copyright 2015 Andy Fleming + * + * p5020ds.dts copyright: + * Copyright 2010 - 2014 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "p5020si-pre.dtsi" + +/ { + model = "varisys,CYRUS"; + compatible = "varisys,CYRUS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01008000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x200000>; + }; + + qportals: qman-portals@ff4200000 { + ranges = <0x0 0xf 0xf4200000 0x200000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + }; + + i2c@118100 { + }; + + i2c@119100 { + rtc@6f { + compatible = "microchip,mcp7941x"; + reg = <0x6f>; + }; + }; + }; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; + + lbc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x1000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xffa00000 0x00040000 + 3 0 0xf 0xffdf0000 0x00008000>; + }; + + pci0: pcie@ffe200000 { + reg = <0xf 0xfe200000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe201000 { + reg = <0xf 0xfe201000 0 0x1000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe202000 { + reg = <0xf 0xfe202000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe203000 { + reg = <0xf 0xfe203000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; + +/include/ "p5020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/ge_imp3a.dts b/arch/powerpc/boot/dts/fsl/ge_imp3a.dts index fefae416a097..a2bb47f4edbe 100644 --- a/arch/powerpc/boot/dts/ge_imp3a.dts +++ b/arch/powerpc/boot/dts/fsl/ge_imp3a.dts @@ -12,7 +12,7 @@ * Copyright 2009 Freescale Semiconductor Inc. */ -/include/ "fsl/p2020si-pre.dtsi" +/include/ "p2020si-pre.dtsi" / { model = "GE_IMP3A"; @@ -252,4 +252,4 @@ }; }; -/include/ "fsl/p2020si-post.dtsi" +/include/ "p2020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/kmcoge4.dts b/arch/powerpc/boot/dts/fsl/kmcoge4.dts index 48dab6a50437..6858ec9ef295 100644 --- a/arch/powerpc/boot/dts/kmcoge4.dts +++ b/arch/powerpc/boot/dts/fsl/kmcoge4.dts @@ -12,7 +12,7 @@ * option) any later version. */ -/include/ "fsl/p2041si-pre.dtsi" +/include/ "p2041si-pre.dtsi" / { model = "keymile,kmcoge4"; @@ -176,4 +176,4 @@ }; }; -/include/ "fsl/p2041si-post.dtsi" +/include/ "p2041si-post.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/fsl/mpc8536ds.dts index 19736222a0b9..96cdce841205 100644 --- a/arch/powerpc/boot/dts/mpc8536ds.dts +++ b/arch/powerpc/boot/dts/fsl/mpc8536ds.dts @@ -9,7 +9,7 @@ * option) any later version. */ -/include/ "fsl/mpc8536si-pre.dtsi" +/include/ "mpc8536si-pre.dtsi" / { model = "fsl,mpc8536ds"; @@ -105,5 +105,5 @@ }; }; -/include/ "fsl/mpc8536si-post.dtsi" +/include/ "mpc8536si-post.dtsi" /include/ "mpc8536ds.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8536ds.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536ds.dtsi index 937ad7e46119..937ad7e46119 100644 --- a/arch/powerpc/boot/dts/mpc8536ds.dtsi +++ b/arch/powerpc/boot/dts/fsl/mpc8536ds.dtsi diff --git a/arch/powerpc/boot/dts/mpc8536ds_36b.dts b/arch/powerpc/boot/dts/fsl/mpc8536ds_36b.dts index 6c723ee108cd..38d326ce92d8 100644 --- a/arch/powerpc/boot/dts/mpc8536ds_36b.dts +++ b/arch/powerpc/boot/dts/fsl/mpc8536ds_36b.dts @@ -9,7 +9,7 @@ * option) any later version. */ -/include/ "fsl/mpc8536si-pre.dtsi" +/include/ "mpc8536si-pre.dtsi" / { model = "fsl,mpc8536ds"; @@ -105,5 +105,5 @@ }; }; -/include/ "fsl/mpc8536si-post.dtsi" +/include/ "mpc8536si-post.dtsi" /include/ "mpc8536ds.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi index c8b2daa40ac8..41935709ebe8 100644 --- a/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi @@ -172,7 +172,7 @@ /* mark compat w/8572 to get some erratum treatment */ gpio-controller@f000 { - compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio"; + compatible = "fsl,mpc8572-gpio"; }; sata@18000 { diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/fsl/mpc8540ads.dts index 7ce274c9a2d5..e6d0b166d68d 100644 --- a/arch/powerpc/boot/dts/mpc8540ads.dts +++ b/arch/powerpc/boot/dts/fsl/mpc8540ads.dts @@ -11,7 +11,7 @@ /dts-v1/; -/include/ "fsl/e500v2_power_isa.dtsi" +/include/ "e500v2_power_isa.dtsi" / { model = "MPC8540ADS"; diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/fsl/mpc8541cds.dts index 4d35a3e0fb02..9fa2c734a988 100644 --- a/arch/powerpc/boot/dts/mpc8541cds.dts +++ b/arch/powerpc/boot/dts/fsl/mpc8541cds.dts @@ -11,7 +11,7 @@ /dts-v1/; -/include/ "fsl/e500v2_power_isa.dtsi" +/include/ "e500v2_power_isa.dtsi" / { model = "MPC8541CDS"; diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/fsl/mpc8544ds.dts index ed38874c3a36..5a6e46861ab5 100644 --- a/arch/powerpc/boot/dts/mpc8544ds.dts +++ b/arch/powerpc/boot/dts/fsl/mpc8544ds.dts @@ -9,7 +9,7 @@ * option) any later version. */ -/include/ "fsl/mpc8544si-pre.dtsi" +/include/ "mpc8544si-pre.dtsi" / { model = "MPC8544DS"; @@ -103,5 +103,5 @@ * for interrupt-map & interrupt-map-mask */ -/include/ "fsl/mpc8544si-post.dtsi" +/include/ "mpc8544si-post.dtsi" /include/ "mpc8544ds.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8544ds.dtsi b/arch/powerpc/boot/dts/fsl/mpc8544ds.dtsi index 47d986b041f6..47d986b041f6 100644 --- a/arch/powerpc/boot/dts/mpc8544ds.dtsi +++ b/arch/powerpc/boot/dts/fsl/mpc8544ds.dtsi diff --git a/arch/powerpc/boot/dts/mpc8548cds.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548cds.dtsi index 3bc7d4711220..3bc7d4711220 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dtsi +++ b/arch/powerpc/boot/dts/fsl/mpc8548cds.dtsi diff --git a/arch/powerpc/boot/dts/mpc8548cds_32b.dts b/arch/powerpc/boot/dts/fsl/mpc8548cds_32b.dts index 6fd63163fc6b..e4620bb192f4 100644 --- a/arch/powerpc/boot/dts/mpc8548cds_32b.dts +++ b/arch/powerpc/boot/dts/fsl/mpc8548cds_32b.dts @@ -9,7 +9,7 @@ * option) any later version. */ -/include/ "fsl/mpc8548si-pre.dtsi" +/include/ "mpc8548si-pre.dtsi" / { model = "MPC8548CDS"; @@ -82,5 +82,5 @@ * for interrupt-map & interrupt-map-mask. */ -/include/ "fsl/mpc8548si-post.dtsi" +/include/ "mpc8548si-post.dtsi" /include/ "mpc8548cds.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8548cds_36b.dts b/arch/powerpc/boot/dts/fsl/mpc8548cds_36b.dts index 10e551b11bd6..bca7c09d3edf 100644 --- a/arch/powerpc/boot/dts/mpc8548cds_36b.dts +++ b/arch/powerpc/boot/dts/fsl/mpc8548cds_36b.dts @@ -9,7 +9,7 @@ * option) any later version. */ -/include/ "fsl/mpc8548si-pre.dtsi" +/include/ "mpc8548si-pre.dtsi" / { model = "MPC8548CDS"; @@ -82,5 +82,5 @@ * for interrupt-map & interrupt-map-mask. */ -/include/ "fsl/mpc8548si-post.dtsi" +/include/ "mpc8548si-post.dtsi" /include/ "mpc8548cds.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/fsl/mpc8555cds.dts index f115f21cb0ae..272f08caea92 100644 --- a/arch/powerpc/boot/dts/mpc8555cds.dts +++ b/arch/powerpc/boot/dts/fsl/mpc8555cds.dts @@ -11,7 +11,7 @@ /dts-v1/; -/include/ "fsl/e500v2_power_isa.dtsi" +/include/ "e500v2_power_isa.dtsi" / { model = "MPC8555CDS"; diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/fsl/mpc8560ads.dts index 0d70921d6125..7a822b08aa35 100644 --- a/arch/powerpc/boot/dts/mpc8560ads.dts +++ b/arch/powerpc/boot/dts/fsl/mpc8560ads.dts @@ -11,7 +11,7 @@ /dts-v1/; -/include/ "fsl/e500v2_power_isa.dtsi" +/include/ "e500v2_power_isa.dtsi" / { model = "MPC8560ADS"; diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/fsl/mpc8568mds.dts index bead2b655b9f..01706a339603 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/fsl/mpc8568mds.dts @@ -9,7 +9,7 @@ * option) any later version. */ -/include/ "fsl/mpc8568si-pre.dtsi" +/include/ "mpc8568si-pre.dtsi" / { model = "MPC8568EMDS"; @@ -311,4 +311,4 @@ }; }; -/include/ "fsl/mpc8568si-post.dtsi" +/include/ "mpc8568si-post.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/fsl/mpc8569mds.dts index d0dcdafa5eb2..a95ff7d2392c 100644 --- a/arch/powerpc/boot/dts/mpc8569mds.dts +++ b/arch/powerpc/boot/dts/fsl/mpc8569mds.dts @@ -9,7 +9,7 @@ * option) any later version. */ -/include/ "fsl/mpc8569si-pre.dtsi" +/include/ "mpc8569si-pre.dtsi" / { model = "MPC8569EMDS"; @@ -444,4 +444,4 @@ }; }; -/include/ "fsl/mpc8569si-post.dtsi" +/include/ "mpc8569si-post.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/fsl/mpc8572ds.dts index 0c9f2955deb4..8ee5b24cc59e 100644 --- a/arch/powerpc/boot/dts/mpc8572ds.dts +++ b/arch/powerpc/boot/dts/fsl/mpc8572ds.dts @@ -9,7 +9,7 @@ * option) any later version. */ -/include/ "fsl/mpc8572si-pre.dtsi" +/include/ "mpc8572si-pre.dtsi" / { model = "fsl,MPC8572DS"; @@ -86,5 +86,5 @@ * for interrupt-map & interrupt-map-mask */ -/include/ "fsl/mpc8572si-post.dtsi" +/include/ "mpc8572si-post.dtsi" /include/ "mpc8572ds.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8572ds.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi index 357490bb84da..357490bb84da 100644 --- a/arch/powerpc/boot/dts/mpc8572ds.dtsi +++ b/arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi diff --git a/arch/powerpc/boot/dts/mpc8572ds_36b.dts b/arch/powerpc/boot/dts/fsl/mpc8572ds_36b.dts index 6c3d0b305e1b..5c48b464669b 100644 --- a/arch/powerpc/boot/dts/mpc8572ds_36b.dts +++ b/arch/powerpc/boot/dts/fsl/mpc8572ds_36b.dts @@ -9,7 +9,7 @@ * option) any later version. */ -/include/ "fsl/mpc8572si-pre.dtsi" +/include/ "mpc8572si-pre.dtsi" / { model = "fsl,MPC8572DS"; @@ -86,5 +86,5 @@ * for interrupt-map & interrupt-map-mask */ -/include/ "fsl/mpc8572si-post.dtsi" +/include/ "mpc8572si-post.dtsi" /include/ "mpc8572ds.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts b/arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core0.dts index ef9ef56b3eeb..ef9ef56b3eeb 100644 --- a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts +++ b/arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core0.dts diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts b/arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core1.dts index 24564ee108e5..24564ee108e5 100644 --- a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts +++ b/arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core1.dts diff --git a/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi index d44e25a48734..49294cf36b4e 100644 --- a/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi @@ -162,7 +162,7 @@ /include/ "pq3-dma-1.dtsi" /include/ "pq3-gpio-0.dtsi" gpio-controller@f000 { - compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio"; + compatible = "fsl,mpc8572-gpio"; }; L2: l2-cache-controller@20000 { diff --git a/arch/powerpc/boot/dts/mvme2500.dts b/arch/powerpc/boot/dts/fsl/mvme2500.dts index 67714cf0f745..c7bc1a0c7194 100644 --- a/arch/powerpc/boot/dts/mvme2500.dts +++ b/arch/powerpc/boot/dts/fsl/mvme2500.dts @@ -12,7 +12,7 @@ * Copyright 2009 Freescale Semiconductor Inc. */ -/include/ "fsl/p2020si-pre.dtsi" +/include/ "p2020si-pre.dtsi" / { model = "MVME2500"; @@ -258,7 +258,7 @@ }; }; -/include/ "fsl/p2020si-post.dtsi" +/include/ "p2020si-post.dtsi" / { soc@ffe00000 { diff --git a/arch/powerpc/boot/dts/oca4080.dts b/arch/powerpc/boot/dts/fsl/oca4080.dts index 42796c5b0561..17bc6f391248 100644 --- a/arch/powerpc/boot/dts/oca4080.dts +++ b/arch/powerpc/boot/dts/fsl/oca4080.dts @@ -36,7 +36,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/p4080si-pre.dtsi" +/include/ "p4080si-pre.dtsi" / { model = "fsl,OCA4080"; @@ -142,4 +142,4 @@ }; }; -/include/ "fsl/p4080si-post.dtsi" +/include/ "p4080si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1010rdb-pa.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pa.dts index 767d4c032857..e4ab53c4ab50 100644 --- a/arch/powerpc/boot/dts/p1010rdb-pa.dts +++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pa.dts @@ -9,7 +9,7 @@ * option) any later version. */ -/include/ "fsl/p1010si-pre.dtsi" +/include/ "p1010si-pre.dtsi" / { model = "fsl,P1010RDB"; @@ -20,4 +20,4 @@ /include/ "p1010rdb.dtsi" /include/ "p1010rdb-pa.dtsi" -/include/ "fsl/p1010si-post.dtsi" +/include/ "p1010si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1010rdb-pa.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb-pa.dtsi index 434fb2d58575..434fb2d58575 100644 --- a/arch/powerpc/boot/dts/p1010rdb-pa.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pa.dtsi diff --git a/arch/powerpc/boot/dts/p1010rdb-pa_36b.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pa_36b.dts index 3033371bc007..03bd76ca8406 100644 --- a/arch/powerpc/boot/dts/p1010rdb-pa_36b.dts +++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pa_36b.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/p1010si-pre.dtsi" +/include/ "p1010si-pre.dtsi" / { model = "fsl,P1010RDB"; @@ -43,4 +43,4 @@ /include/ "p1010rdb.dtsi" /include/ "p1010rdb-pa.dtsi" -/include/ "fsl/p1010si-post.dtsi" +/include/ "p1010si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1010rdb-pb.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts index 6eeb7d3185be..37681fda4b7d 100644 --- a/arch/powerpc/boot/dts/p1010rdb-pb.dts +++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts @@ -9,7 +9,7 @@ * option) any later version. */ -/include/ "fsl/p1010si-pre.dtsi" +/include/ "p1010si-pre.dtsi" / { model = "fsl,P1010RDB-PB"; @@ -32,4 +32,4 @@ interrupts = <1 1 0 0>; }; -/include/ "fsl/p1010si-post.dtsi" +/include/ "p1010si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1010rdb-pb_36b.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts index 7ab3c907b326..4cf255fedc96 100644 --- a/arch/powerpc/boot/dts/p1010rdb-pb_36b.dts +++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/p1010si-pre.dtsi" +/include/ "p1010si-pre.dtsi" / { model = "fsl,P1010RDB-PB"; @@ -55,4 +55,4 @@ interrupts = <1 1 0 0>; }; -/include/ "fsl/p1010si-post.dtsi" +/include/ "p1010si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1010rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi index ea534efa790d..0f0ced69835a 100644 --- a/arch/powerpc/boot/dts/p1010rdb.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi @@ -186,6 +186,18 @@ }; }; + ptp_clock@b0e00 { + compatible = "fsl,etsec-ptp"; + reg = <0xb0e00 0xb0>; + interrupts = <68 2 0 0 69 2 0 0>; + fsl,tclk-period = <10>; + fsl,tmr-prsc = <2>; + fsl,tmr-add = <0x80000016>; + fsl,tmr-fiper1 = <999999990>; + fsl,tmr-fiper2 = <99990>; + fsl,max-adj = <199999999>; + }; + enet0: ethernet@b0000 { phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; diff --git a/arch/powerpc/boot/dts/p1010rdb_32b.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb_32b.dtsi index fdc19aab2f70..fdc19aab2f70 100644 --- a/arch/powerpc/boot/dts/p1010rdb_32b.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1010rdb_32b.dtsi diff --git a/arch/powerpc/boot/dts/p1010rdb_36b.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb_36b.dtsi index de2fceed4f79..de2fceed4f79 100644 --- a/arch/powerpc/boot/dts/p1010rdb_36b.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1010rdb_36b.dtsi diff --git a/arch/powerpc/boot/dts/p1020mbg-pc.dtsi b/arch/powerpc/boot/dts/fsl/p1020mbg-pc.dtsi index a24699cfea9c..a24699cfea9c 100644 --- a/arch/powerpc/boot/dts/p1020mbg-pc.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1020mbg-pc.dtsi diff --git a/arch/powerpc/boot/dts/p1020mbg-pc_32b.dts b/arch/powerpc/boot/dts/fsl/p1020mbg-pc_32b.dts index ab8f076eae90..b29d1fcb5e6b 100644 --- a/arch/powerpc/boot/dts/p1020mbg-pc_32b.dts +++ b/arch/powerpc/boot/dts/fsl/p1020mbg-pc_32b.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/p1020si-pre.dtsi" +/include/ "p1020si-pre.dtsi" / { model = "fsl,P1020MBG-PC"; compatible = "fsl,P1020MBG-PC"; @@ -86,4 +86,4 @@ }; /include/ "p1020mbg-pc.dtsi" -/include/ "fsl/p1020si-post.dtsi" +/include/ "p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1020mbg-pc_36b.dts b/arch/powerpc/boot/dts/fsl/p1020mbg-pc_36b.dts index 9e9f401419b1..678d0eec24e2 100644 --- a/arch/powerpc/boot/dts/p1020mbg-pc_36b.dts +++ b/arch/powerpc/boot/dts/fsl/p1020mbg-pc_36b.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/p1020si-pre.dtsi" +/include/ "p1020si-pre.dtsi" / { model = "fsl,P1020MBG-PC"; compatible = "fsl,P1020MBG-PC"; @@ -86,4 +86,4 @@ }; /include/ "p1020mbg-pc.dtsi" -/include/ "fsl/p1020si-post.dtsi" +/include/ "p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1020rdb-pc.dtsi b/arch/powerpc/boot/dts/fsl/p1020rdb-pc.dtsi index c952cd37cf6d..c952cd37cf6d 100644 --- a/arch/powerpc/boot/dts/p1020rdb-pc.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pc.dtsi diff --git a/arch/powerpc/boot/dts/p1020rdb-pc_32b.dts b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_32b.dts index 4de69b726dc5..8175bf6f3e9c 100644 --- a/arch/powerpc/boot/dts/p1020rdb-pc_32b.dts +++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_32b.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/p1020si-pre.dtsi" +/include/ "p1020si-pre.dtsi" / { model = "fsl,P1020RDB-PC"; compatible = "fsl,P1020RDB-PC"; @@ -87,4 +87,4 @@ }; /include/ "p1020rdb-pc.dtsi" -/include/ "fsl/p1020si-post.dtsi" +/include/ "p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1020rdb-pc_36b.dts b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_36b.dts index 5237da7441bc..01c305795163 100644 --- a/arch/powerpc/boot/dts/p1020rdb-pc_36b.dts +++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_36b.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/p1020si-pre.dtsi" +/include/ "p1020si-pre.dtsi" / { model = "fsl,P1020RDB-PC"; compatible = "fsl,P1020RDB-PC"; @@ -87,4 +87,4 @@ }; /include/ "p1020rdb-pc.dtsi" -/include/ "fsl/p1020si-post.dtsi" +/include/ "p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1020rdb-pc_camp_core0.dts b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core0.dts index f411515937ec..f411515937ec 100644 --- a/arch/powerpc/boot/dts/p1020rdb-pc_camp_core0.dts +++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core0.dts diff --git a/arch/powerpc/boot/dts/p1020rdb-pc_camp_core1.dts b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core1.dts index a91335ad82c2..a91335ad82c2 100644 --- a/arch/powerpc/boot/dts/p1020rdb-pc_camp_core1.dts +++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core1.dts diff --git a/arch/powerpc/boot/dts/p1020rdb-pd.dts b/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts index 987017ea36b6..740553c090a3 100644 --- a/arch/powerpc/boot/dts/p1020rdb-pd.dts +++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/p1020si-pre.dtsi" +/include/ "p1020si-pre.dtsi" / { model = "fsl,P1020RDB-PD"; compatible = "fsl,P1020RDB-PD"; @@ -225,6 +225,18 @@ }; }; + ptp_clock@b0e00 { + compatible = "fsl,etsec-ptp"; + reg = <0xb0e00 0xb0>; + interrupts = <68 2 0 0 69 2 0 0>; + fsl,tclk-period = <10>; + fsl,tmr-prsc = <2>; + fsl,tmr-add = <0x80000016>; + fsl,tmr-fiper1 = <999999990>; + fsl,tmr-fiper2 = <99990>; + fsl,max-adj = <199999999>; + }; + enet0: ethernet@b0000 { fixed-link = <1 1 1000 0 0>; phy-connection-type = "rgmii-id"; @@ -277,4 +289,4 @@ }; }; -/include/ "fsl/p1020si-post.dtsi" +/include/ "p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1020rdb.dts b/arch/powerpc/boot/dts/fsl/p1020rdb.dts index 518bf99b1f50..81362252bc8c 100644 --- a/arch/powerpc/boot/dts/p1020rdb.dts +++ b/arch/powerpc/boot/dts/fsl/p1020rdb.dts @@ -9,7 +9,7 @@ * option) any later version. */ -/include/ "fsl/p1020si-pre.dtsi" +/include/ "p1020si-pre.dtsi" / { model = "fsl,P1020RDB"; compatible = "fsl,P1020RDB"; @@ -63,4 +63,4 @@ }; /include/ "p1020rdb.dtsi" -/include/ "fsl/p1020si-post.dtsi" +/include/ "p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1020rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1020rdb.dtsi index 1fb7e0e0940f..1fb7e0e0940f 100644 --- a/arch/powerpc/boot/dts/p1020rdb.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1020rdb.dtsi diff --git a/arch/powerpc/boot/dts/p1020rdb_36b.dts b/arch/powerpc/boot/dts/fsl/p1020rdb_36b.dts index bdbdb6097e57..74471e3ca136 100644 --- a/arch/powerpc/boot/dts/p1020rdb_36b.dts +++ b/arch/powerpc/boot/dts/fsl/p1020rdb_36b.dts @@ -9,7 +9,7 @@ * option) any later version. */ -/include/ "fsl/p1020si-pre.dtsi" +/include/ "p1020si-pre.dtsi" / { model = "fsl,P1020RDB"; compatible = "fsl,P1020RDB"; @@ -63,4 +63,4 @@ }; /include/ "p1020rdb.dtsi" -/include/ "fsl/p1020si-post.dtsi" +/include/ "p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1020utm-pc.dtsi b/arch/powerpc/boot/dts/fsl/p1020utm-pc.dtsi index 7ea85eabcc5c..7ea85eabcc5c 100644 --- a/arch/powerpc/boot/dts/p1020utm-pc.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1020utm-pc.dtsi diff --git a/arch/powerpc/boot/dts/p1020utm-pc_32b.dts b/arch/powerpc/boot/dts/fsl/p1020utm-pc_32b.dts index 4bfdd8971cdb..bc03ef611f98 100644 --- a/arch/powerpc/boot/dts/p1020utm-pc_32b.dts +++ b/arch/powerpc/boot/dts/fsl/p1020utm-pc_32b.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/p1020si-pre.dtsi" +/include/ "p1020si-pre.dtsi" / { model = "fsl,P1020UTM-PC"; compatible = "fsl,P1020UTM-PC"; @@ -86,4 +86,4 @@ }; /include/ "p1020utm-pc.dtsi" -/include/ "fsl/p1020si-post.dtsi" +/include/ "p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1020utm-pc_36b.dts b/arch/powerpc/boot/dts/fsl/p1020utm-pc_36b.dts index abec53557501..32766f6a475e 100644 --- a/arch/powerpc/boot/dts/p1020utm-pc_36b.dts +++ b/arch/powerpc/boot/dts/fsl/p1020utm-pc_36b.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/p1020si-pre.dtsi" +/include/ "p1020si-pre.dtsi" / { model = "fsl,P1020UTM-PC"; compatible = "fsl,P1020UTM-PC"; @@ -86,4 +86,4 @@ }; /include/ "p1020utm-pc.dtsi" -/include/ "fsl/p1020si-post.dtsi" +/include/ "p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1021mds.dts b/arch/powerpc/boot/dts/fsl/p1021mds.dts index 76559044df41..27fdfd7dc7c7 100644 --- a/arch/powerpc/boot/dts/p1021mds.dts +++ b/arch/powerpc/boot/dts/fsl/p1021mds.dts @@ -9,7 +9,7 @@ * option) any later version. */ -/include/ "fsl/p1021si-pre.dtsi" +/include/ "p1021si-pre.dtsi" / { model = "fsl,P1021"; compatible = "fsl,P1021MDS"; @@ -320,4 +320,4 @@ }; }; -/include/ "fsl/p1021si-post.dtsi" +/include/ "p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1021rdb-pc.dtsi b/arch/powerpc/boot/dts/fsl/p1021rdb-pc.dtsi index d6274c58f496..e8a0f95fb24a 100644 --- a/arch/powerpc/boot/dts/p1021rdb-pc.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1021rdb-pc.dtsi @@ -224,6 +224,18 @@ }; }; + ptp_clock@b0e00 { + compatible = "fsl,etsec-ptp"; + reg = <0xb0e00 0xb0>; + interrupts = <68 2 0 0 69 2 0 0>; + fsl,tclk-period = <10>; + fsl,tmr-prsc = <2>; + fsl,tmr-add = <0x80000016>; + fsl,tmr-fiper1 = <999999990>; + fsl,tmr-fiper2 = <99990>; + fsl,max-adj = <199999999>; + }; + enet0: ethernet@b0000 { fixed-link = <1 1 1000 0 0>; phy-connection-type = "rgmii-id"; diff --git a/arch/powerpc/boot/dts/p1021rdb-pc_32b.dts b/arch/powerpc/boot/dts/fsl/p1021rdb-pc_32b.dts index 7cefa12b629a..d2b4710357ac 100644 --- a/arch/powerpc/boot/dts/p1021rdb-pc_32b.dts +++ b/arch/powerpc/boot/dts/fsl/p1021rdb-pc_32b.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/p1021si-pre.dtsi" +/include/ "p1021si-pre.dtsi" / { model = "fsl,P1021RDB"; compatible = "fsl,P1021RDB-PC"; @@ -93,4 +93,4 @@ }; /include/ "p1021rdb-pc.dtsi" -/include/ "fsl/p1021si-post.dtsi" +/include/ "p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1021rdb-pc_36b.dts b/arch/powerpc/boot/dts/fsl/p1021rdb-pc_36b.dts index 53d0c889039c..e298c29e5606 100644 --- a/arch/powerpc/boot/dts/p1021rdb-pc_36b.dts +++ b/arch/powerpc/boot/dts/fsl/p1021rdb-pc_36b.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/p1021si-pre.dtsi" +/include/ "p1021si-pre.dtsi" / { model = "fsl,P1021RDB"; compatible = "fsl,P1021RDB-PC"; @@ -93,4 +93,4 @@ }; /include/ "p1021rdb-pc.dtsi" -/include/ "fsl/p1021si-post.dtsi" +/include/ "p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1022ds.dtsi b/arch/powerpc/boot/dts/fsl/p1022ds.dtsi index 957e0dc1dc0f..149da0f123ee 100644 --- a/arch/powerpc/boot/dts/p1022ds.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1022ds.dtsi @@ -215,6 +215,18 @@ }; }; + ptp_clock@b0e00 { + compatible = "fsl,etsec-ptp"; + reg = <0xb0e00 0xb0>; + interrupts = <68 2 0 0 69 2 0 0>; + fsl,tclk-period = <5>; + fsl,tmr-prsc = <2>; + fsl,tmr-add = <0xc01ebd3d>; + fsl,tmr-fiper1 = <999999995>; + fsl,tmr-fiper2 = <99990>; + fsl,max-adj = <266499999>; + }; + ethernet@b0000 { phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; diff --git a/arch/powerpc/boot/dts/p1022ds_32b.dts b/arch/powerpc/boot/dts/fsl/p1022ds_32b.dts index d96cae00a9e3..5a7eaceb9e8e 100644 --- a/arch/powerpc/boot/dts/p1022ds_32b.dts +++ b/arch/powerpc/boot/dts/fsl/p1022ds_32b.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/p1022si-pre.dtsi" +/include/ "p1022si-pre.dtsi" / { model = "fsl,P1022DS"; compatible = "fsl,P1022DS"; @@ -99,5 +99,5 @@ }; }; -/include/ "fsl/p1022si-post.dtsi" +/include/ "p1022si-post.dtsi" /include/ "p1022ds.dtsi" diff --git a/arch/powerpc/boot/dts/p1022ds_36b.dts b/arch/powerpc/boot/dts/fsl/p1022ds_36b.dts index f7aacce40bf6..88063cd9e20a 100644 --- a/arch/powerpc/boot/dts/p1022ds_36b.dts +++ b/arch/powerpc/boot/dts/fsl/p1022ds_36b.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/p1022si-pre.dtsi" +/include/ "p1022si-pre.dtsi" / { model = "fsl,P1022DS"; compatible = "fsl,P1022DS"; @@ -99,5 +99,5 @@ }; }; -/include/ "fsl/p1022si-post.dtsi" +/include/ "p1022si-post.dtsi" /include/ "p1022ds.dtsi" diff --git a/arch/powerpc/boot/dts/p1022rdk.dts b/arch/powerpc/boot/dts/fsl/p1022rdk.dts index 51d82de223f3..04c16337268a 100644 --- a/arch/powerpc/boot/dts/p1022rdk.dts +++ b/arch/powerpc/boot/dts/fsl/p1022rdk.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/p1022si-pre.dtsi" +/include/ "p1022si-pre.dtsi" / { model = "fsl,P1022RDK"; compatible = "fsl,P1022RDK"; @@ -185,4 +185,4 @@ }; }; -/include/ "fsl/p1022si-post.dtsi" +/include/ "p1022si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1023rdb.dts b/arch/powerpc/boot/dts/fsl/p1023rdb.dts index 05a00a4d2861..9716ca64651c 100644 --- a/arch/powerpc/boot/dts/p1023rdb.dts +++ b/arch/powerpc/boot/dts/fsl/p1023rdb.dts @@ -34,7 +34,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/p1023si-pre.dtsi" +/include/ "p1023si-pre.dtsi" / { model = "fsl,P1023"; @@ -257,4 +257,4 @@ }; }; -/include/ "fsl/p1023si-post.dtsi" +/include/ "p1023si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1024rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1024rdb.dtsi index b05dcb40f800..b05dcb40f800 100644 --- a/arch/powerpc/boot/dts/p1024rdb.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1024rdb.dtsi diff --git a/arch/powerpc/boot/dts/p1024rdb_32b.dts b/arch/powerpc/boot/dts/fsl/p1024rdb_32b.dts index 90e803e9ba5f..8b09b9d56ad1 100644 --- a/arch/powerpc/boot/dts/p1024rdb_32b.dts +++ b/arch/powerpc/boot/dts/fsl/p1024rdb_32b.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/p1020si-pre.dtsi" +/include/ "p1020si-pre.dtsi" / { model = "fsl,P1024RDB"; compatible = "fsl,P1024RDB"; @@ -84,4 +84,4 @@ }; /include/ "p1024rdb.dtsi" -/include/ "fsl/p1020si-post.dtsi" +/include/ "p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1024rdb_36b.dts b/arch/powerpc/boot/dts/fsl/p1024rdb_36b.dts index 3656825b65a1..e7093aef28f1 100644 --- a/arch/powerpc/boot/dts/p1024rdb_36b.dts +++ b/arch/powerpc/boot/dts/fsl/p1024rdb_36b.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/p1020si-pre.dtsi" +/include/ "p1020si-pre.dtsi" / { model = "fsl,P1024RDB"; compatible = "fsl,P1024RDB"; @@ -84,4 +84,4 @@ }; /include/ "p1024rdb.dtsi" -/include/ "fsl/p1020si-post.dtsi" +/include/ "p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1025rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1025rdb.dtsi index f50256482297..f50256482297 100644 --- a/arch/powerpc/boot/dts/p1025rdb.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1025rdb.dtsi diff --git a/arch/powerpc/boot/dts/p1025rdb_32b.dts b/arch/powerpc/boot/dts/fsl/p1025rdb_32b.dts index a2ed6280ba7a..b15acbaea34b 100644 --- a/arch/powerpc/boot/dts/p1025rdb_32b.dts +++ b/arch/powerpc/boot/dts/fsl/p1025rdb_32b.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/p1021si-pre.dtsi" +/include/ "p1021si-pre.dtsi" / { model = "fsl,P1025RDB"; compatible = "fsl,P1025RDB"; @@ -130,4 +130,4 @@ }; /include/ "p1025rdb.dtsi" -/include/ "fsl/p1021si-post.dtsi" +/include/ "p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1025rdb_36b.dts b/arch/powerpc/boot/dts/fsl/p1025rdb_36b.dts index 06deb6f341ba..b0ded5e8bd0b 100644 --- a/arch/powerpc/boot/dts/p1025rdb_36b.dts +++ b/arch/powerpc/boot/dts/fsl/p1025rdb_36b.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/p1021si-pre.dtsi" +/include/ "p1021si-pre.dtsi" / { model = "fsl,P1025RDB"; compatible = "fsl,P1025RDB"; @@ -90,4 +90,4 @@ }; /include/ "p1025rdb.dtsi" -/include/ "fsl/p1021si-post.dtsi" +/include/ "p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1025twr.dts b/arch/powerpc/boot/dts/fsl/p1025twr.dts index 9036a4987905..9b8863b74b60 100644 --- a/arch/powerpc/boot/dts/p1025twr.dts +++ b/arch/powerpc/boot/dts/fsl/p1025twr.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/p1021si-pre.dtsi" +/include/ "p1021si-pre.dtsi" / { model = "fsl,P1025"; compatible = "fsl,TWR-P1025"; @@ -92,4 +92,4 @@ }; /include/ "p1025twr.dtsi" -/include/ "fsl/p1021si-post.dtsi" +/include/ "p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1025twr.dtsi b/arch/powerpc/boot/dts/fsl/p1025twr.dtsi index 8453501c256e..08816fb474f5 100644 --- a/arch/powerpc/boot/dts/p1025twr.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1025twr.dtsi @@ -138,6 +138,18 @@ }; }; + ptp_clock@b0e00 { + compatible = "fsl,etsec-ptp"; + reg = <0xb0e00 0xb0>; + interrupts = <68 2 0 0 69 2 0 0>; + fsl,tclk-period = <10>; + fsl,tmr-prsc = <2>; + fsl,tmr-add = <0xc0000021>; + fsl,tmr-fiper1 = <999999990>; + fsl,tmr-fiper2 = <99990>; + fsl,max-adj = <133333332>; + }; + enet0: ethernet@b0000 { phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; diff --git a/arch/powerpc/boot/dts/p2020ds.dts b/arch/powerpc/boot/dts/fsl/p2020ds.dts index 237310cc7e6c..5ba06f753bc5 100644 --- a/arch/powerpc/boot/dts/p2020ds.dts +++ b/arch/powerpc/boot/dts/fsl/p2020ds.dts @@ -9,7 +9,7 @@ * option) any later version. */ -/include/ "fsl/p2020si-pre.dtsi" +/include/ "p2020si-pre.dtsi" / { model = "fsl,P2020DS"; @@ -85,5 +85,5 @@ * for interrupt-map & interrupt-map-mask */ -/include/ "fsl/p2020si-post.dtsi" +/include/ "p2020si-post.dtsi" /include/ "p2020ds.dtsi" diff --git a/arch/powerpc/boot/dts/p2020ds.dtsi b/arch/powerpc/boot/dts/fsl/p2020ds.dtsi index e699cf95b063..e699cf95b063 100644 --- a/arch/powerpc/boot/dts/p2020ds.dtsi +++ b/arch/powerpc/boot/dts/fsl/p2020ds.dtsi diff --git a/arch/powerpc/boot/dts/p2020rdb-pc.dtsi b/arch/powerpc/boot/dts/fsl/p2020rdb-pc.dtsi index c21d1c7d16cd..ad2e242365cc 100644 --- a/arch/powerpc/boot/dts/p2020rdb-pc.dtsi +++ b/arch/powerpc/boot/dts/fsl/p2020rdb-pc.dtsi @@ -215,12 +215,12 @@ }; ptp_clock@24e00 { - fsl,tclk-period = <5>; - fsl,tmr-prsc = <200>; - fsl,tmr-add = <0xCCCCCCCD>; - fsl,tmr-fiper1 = <0x3B9AC9FB>; - fsl,tmr-fiper2 = <0x0001869B>; - fsl,max-adj = <249999999>; + fsl,tclk-period = <5>; + fsl,tmr-prsc = <2>; + fsl,tmr-add = <0xaaaaaaab>; + fsl,tmr-fiper1 = <999999995>; + fsl,tmr-fiper2 = <99990>; + fsl,max-adj = <299999999>; }; enet0: ethernet@24000 { diff --git a/arch/powerpc/boot/dts/p2020rdb-pc_32b.dts b/arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts index 57573bd52caa..d3295c204bbf 100644 --- a/arch/powerpc/boot/dts/p2020rdb-pc_32b.dts +++ b/arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/p2020si-pre.dtsi" +/include/ "p2020si-pre.dtsi" / { model = "fsl,P2020RDB"; @@ -93,4 +93,4 @@ }; /include/ "p2020rdb-pc.dtsi" -/include/ "fsl/p2020si-post.dtsi" +/include/ "p2020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p2020rdb-pc_36b.dts b/arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts index 470247ea68b4..9307a8f41ddb 100644 --- a/arch/powerpc/boot/dts/p2020rdb-pc_36b.dts +++ b/arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/p2020si-pre.dtsi" +/include/ "p2020si-pre.dtsi" / { model = "fsl,P2020RDB"; @@ -93,4 +93,4 @@ }; /include/ "p2020rdb-pc.dtsi" -/include/ "fsl/p2020si-post.dtsi" +/include/ "p2020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/dts/fsl/p2020rdb.dts index 4d52bce1d5b0..70cf09019ce5 100644 --- a/arch/powerpc/boot/dts/p2020rdb.dts +++ b/arch/powerpc/boot/dts/fsl/p2020rdb.dts @@ -9,7 +9,7 @@ * option) any later version. */ -/include/ "fsl/p2020si-pre.dtsi" +/include/ "p2020si-pre.dtsi" / { model = "fsl,P2020RDB"; @@ -288,4 +288,4 @@ }; }; -/include/ "fsl/p2020si-post.dtsi" +/include/ "p2020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p2041rdb.dts b/arch/powerpc/boot/dts/fsl/p2041rdb.dts index d2bb0765bd5a..e9bd89406c4c 100644 --- a/arch/powerpc/boot/dts/p2041rdb.dts +++ b/arch/powerpc/boot/dts/fsl/p2041rdb.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/p2041si-pre.dtsi" +/include/ "p2041si-pre.dtsi" / { model = "fsl,P2041RDB"; @@ -247,4 +247,4 @@ }; }; -/include/ "fsl/p2041si-post.dtsi" +/include/ "p2041si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi index 04ad177b6a12..51e975d7631a 100644 --- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi @@ -1,7 +1,7 @@ /* * P2041/P2040 Silicon/SoC Device Tree Source (post include) * - * Copyright 2011 - 2014 Freescale Semiconductor Inc. + * Copyright 2011 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -430,4 +430,31 @@ crypto: crypto@300000 { /include/ "qoriq-qman1.dtsi" /include/ "qoriq-bman1.dtsi" + +/include/ "qoriq-fman-0.dtsi" +/include/ "qoriq-fman-0-1g-0.dtsi" +/include/ "qoriq-fman-0-1g-1.dtsi" +/include/ "qoriq-fman-0-1g-2.dtsi" +/include/ "qoriq-fman-0-1g-3.dtsi" +/include/ "qoriq-fman-0-1g-4.dtsi" +/include/ "qoriq-fman-0-10g-0.dtsi" + fman@400000 { + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + + enet4: ethernet@e8000 { + }; + + enet5: ethernet@f0000 { + }; + }; }; diff --git a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi index b1ea147f2995..941274c41f21 100644 --- a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi @@ -1,7 +1,7 @@ /* * P2041 Silicon/SoC Device Tree Source (pre include) * - * Copyright 2011 Freescale Semiconductor Inc. + * Copyright 2011 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -72,6 +72,14 @@ rtic_c = &rtic_c; rtic_d = &rtic_d; sec_mon = &sec_mon; + + fman0 = &fman0; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; + ethernet5 = &enet5; }; cpus { diff --git a/arch/powerpc/boot/dts/p3041ds.dts b/arch/powerpc/boot/dts/fsl/p3041ds.dts index eca6c697cfd7..f2b1d40334d4 100644 --- a/arch/powerpc/boot/dts/p3041ds.dts +++ b/arch/powerpc/boot/dts/fsl/p3041ds.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/p3041si-pre.dtsi" +/include/ "p3041si-pre.dtsi" / { model = "fsl,P3041DS"; @@ -281,4 +281,4 @@ }; }; -/include/ "fsl/p3041si-post.dtsi" +/include/ "p3041si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi index 2cab18af6df2..187676fa8d83 100644 --- a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi @@ -1,7 +1,7 @@ /* * P3041 Silicon/SoC Device Tree Source (post include) * - * Copyright 2011 - 2014 Freescale Semiconductor Inc. + * Copyright 2011 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -457,4 +457,31 @@ crypto: crypto@300000 { /include/ "qoriq-qman1.dtsi" /include/ "qoriq-bman1.dtsi" + +/include/ "qoriq-fman-0.dtsi" +/include/ "qoriq-fman-0-1g-0.dtsi" +/include/ "qoriq-fman-0-1g-1.dtsi" +/include/ "qoriq-fman-0-1g-2.dtsi" +/include/ "qoriq-fman-0-1g-3.dtsi" +/include/ "qoriq-fman-0-1g-4.dtsi" +/include/ "qoriq-fman-0-10g-0.dtsi" + fman@400000 { + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + + enet4: ethernet@e8000 { + }; + + enet5: ethernet@f0000 { + }; + }; }; diff --git a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi index dc5f4b362c24..50b73e8e638f 100644 --- a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi @@ -1,7 +1,7 @@ /* * P3041 Silicon/SoC Device Tree Source (pre include) * - * Copyright 2011 Freescale Semiconductor Inc. + * Copyright 2011 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -73,6 +73,14 @@ rtic_c = &rtic_c; rtic_d = &rtic_d; sec_mon = &sec_mon; + + fman0 = &fman0; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; + ethernet5 = &enet5; }; cpus { diff --git a/arch/powerpc/boot/dts/p4080ds.dts b/arch/powerpc/boot/dts/fsl/p4080ds.dts index 4f80c9d02c27..28a55c5e7099 100644 --- a/arch/powerpc/boot/dts/p4080ds.dts +++ b/arch/powerpc/boot/dts/fsl/p4080ds.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/p4080si-pre.dtsi" +/include/ "p4080si-pre.dtsi" / { model = "fsl,P4080DS"; @@ -215,4 +215,4 @@ }; -/include/ "fsl/p4080si-post.dtsi" +/include/ "p4080si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi index dfc76bc41cb2..a0252085f858 100644 --- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi @@ -1,7 +1,7 @@ /* * P4080/P4040 Silicon/SoC Device Tree Source (post include) * - * Copyright 2011 - 2014 Freescale Semiconductor Inc. + * Copyright 2011 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -513,4 +513,50 @@ crypto: crypto@300000 { /include/ "qoriq-qman1.dtsi" /include/ "qoriq-bman1.dtsi" + +/include/ "qoriq-fman-0.dtsi" +/include/ "qoriq-fman-0-1g-0.dtsi" +/include/ "qoriq-fman-0-1g-1.dtsi" +/include/ "qoriq-fman-0-1g-2.dtsi" +/include/ "qoriq-fman-0-1g-3.dtsi" +/include/ "qoriq-fman-0-10g-0.dtsi" + fman@400000 { + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + + enet4: ethernet@f0000 { + }; + }; + +/include/ "qoriq-fman-1.dtsi" +/include/ "qoriq-fman-1-1g-0.dtsi" +/include/ "qoriq-fman-1-1g-1.dtsi" +/include/ "qoriq-fman-1-1g-2.dtsi" +/include/ "qoriq-fman-1-1g-3.dtsi" +/include/ "qoriq-fman-1-10g-0.dtsi" + fman@500000 { + enet5: ethernet@e0000 { + }; + + enet6: ethernet@e2000 { + }; + + enet7: ethernet@e4000 { + }; + + enet8: ethernet@e6000 { + }; + + enet9: ethernet@f0000 { + }; + }; }; diff --git a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi index 38bde0958672..d56a546b73e6 100644 --- a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi @@ -1,7 +1,7 @@ /* * P4080/P4040 Silicon/SoC Device Tree Source (pre include) * - * Copyright 2011 Freescale Semiconductor Inc. + * Copyright 2011 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -72,6 +72,19 @@ rtic_c = &rtic_c; rtic_d = &rtic_d; sec_mon = &sec_mon; + + fman0 = &fman0; + fman1 = &fman1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; + ethernet5 = &enet5; + ethernet6 = &enet6; + ethernet7 = &enet7; + ethernet8 = &enet8; + ethernet9 = &enet9; }; cpus { diff --git a/arch/powerpc/boot/dts/p5020ds.dts b/arch/powerpc/boot/dts/fsl/p5020ds.dts index d0309a8b9749..920dc77b9c43 100644 --- a/arch/powerpc/boot/dts/p5020ds.dts +++ b/arch/powerpc/boot/dts/fsl/p5020ds.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/p5020si-pre.dtsi" +/include/ "p5020si-pre.dtsi" / { model = "fsl,P5020DS"; @@ -281,4 +281,4 @@ }; }; -/include/ "fsl/p5020si-post.dtsi" +/include/ "p5020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi index b77923ad72cf..cd008cdd2889 100644 --- a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi @@ -1,7 +1,7 @@ /* * P5020/5010 Silicon/SoC Device Tree Source (post include) * - * Copyright 2011 - 2014 Freescale Semiconductor Inc. + * Copyright 2011 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -448,4 +448,31 @@ raideng@320000 { fsl,iommu-parent = <&pamu1>; }; + +/include/ "qoriq-fman-0.dtsi" +/include/ "qoriq-fman-0-1g-0.dtsi" +/include/ "qoriq-fman-0-1g-1.dtsi" +/include/ "qoriq-fman-0-1g-2.dtsi" +/include/ "qoriq-fman-0-1g-3.dtsi" +/include/ "qoriq-fman-0-1g-4.dtsi" +/include/ "qoriq-fman-0-10g-0.dtsi" + fman@400000 { + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + + enet4: ethernet@e8000 { + }; + + enet5: ethernet@f0000 { + }; + }; }; diff --git a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi index 1cc61e126e4c..bfba0b4f1cbb 100644 --- a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi @@ -1,7 +1,7 @@ /* * P5020/P5010 Silicon/SoC Device Tree Source (pre include) * - * Copyright 2011 Freescale Semiconductor Inc. + * Copyright 2011 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -79,6 +79,14 @@ raideng_jr1 = &raideng_jr1; raideng_jr2 = &raideng_jr2; raideng_jr3 = &raideng_jr3; + + fman0 = &fman0; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; + ethernet5 = &enet5; }; cpus { diff --git a/arch/powerpc/boot/dts/p5040ds.dts b/arch/powerpc/boot/dts/fsl/p5040ds.dts index 05168236d3ab..e169cc297ea3 100644 --- a/arch/powerpc/boot/dts/p5040ds.dts +++ b/arch/powerpc/boot/dts/fsl/p5040ds.dts @@ -32,7 +32,7 @@ * software, even if advised of the possibility of such damage. */ -/include/ "fsl/p5040si-pre.dtsi" +/include/ "p5040si-pre.dtsi" / { model = "fsl,P5040DS"; @@ -251,4 +251,4 @@ }; }; -/include/ "fsl/p5040si-post.dtsi" +/include/ "p5040si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi index 6d214526b81b..2f227b1345ad 100644 --- a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi @@ -1,7 +1,7 @@ /* * P5040 Silicon/SoC Device Tree Source (post include) * - * Copyright 2012 - 2014 Freescale Semiconductor Inc. + * Copyright 2012 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -422,4 +422,58 @@ /include/ "qoriq-qman1.dtsi" /include/ "qoriq-bman1.dtsi" + +/include/ "qoriq-fman-0.dtsi" +/include/ "qoriq-fman-0-1g-0.dtsi" +/include/ "qoriq-fman-0-1g-1.dtsi" +/include/ "qoriq-fman-0-1g-2.dtsi" +/include/ "qoriq-fman-0-1g-3.dtsi" +/include/ "qoriq-fman-0-1g-4.dtsi" +/include/ "qoriq-fman-0-10g-0.dtsi" + fman@400000 { + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + + enet4: ethernet@e8000 { + }; + + enet5: ethernet@f0000 { + }; + }; + +/include/ "qoriq-fman-1.dtsi" +/include/ "qoriq-fman-1-1g-0.dtsi" +/include/ "qoriq-fman-1-1g-1.dtsi" +/include/ "qoriq-fman-1-1g-2.dtsi" +/include/ "qoriq-fman-1-1g-3.dtsi" +/include/ "qoriq-fman-1-1g-4.dtsi" +/include/ "qoriq-fman-1-10g-0.dtsi" + fman@500000 { + enet6: ethernet@e0000 { + }; + + enet7: ethernet@e2000 { + }; + + enet8: ethernet@e4000 { + }; + + enet9: ethernet@e6000 { + }; + + enet10: ethernet@e8000 { + }; + + enet11: ethernet@f0000 { + }; + }; }; diff --git a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi index b048a2be05a8..0659d5bb69b8 100644 --- a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi @@ -1,7 +1,7 @@ /* * P5040 Silicon/SoC Device Tree Source (pre include) * - * Copyright 2012 Freescale Semiconductor Inc. + * Copyright 2012 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -72,6 +72,21 @@ rtic_c = &rtic_c; rtic_d = &rtic_d; sec_mon = &sec_mon; + + fman0 = &fman0; + fman1 = &fman1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; + ethernet5 = &enet5; + ethernet6 = &enet6; + ethernet7 = &enet7; + ethernet8 = &enet8; + ethernet9 = &enet9; + ethernet10 = &enet10; + ethernet11 = &enet11; }; cpus { diff --git a/arch/powerpc/boot/dts/ppa8548.dts b/arch/powerpc/boot/dts/fsl/ppa8548.dts index 27b0699ee923..8f9ffbe0e4f4 100644 --- a/arch/powerpc/boot/dts/ppa8548.dts +++ b/arch/powerpc/boot/dts/fsl/ppa8548.dts @@ -12,7 +12,7 @@ * option) any later version. */ -/include/ "fsl/mpc8548si-pre.dtsi" +/include/ "mpc8548si-pre.dtsi" / { model = "ppa8548"; @@ -161,4 +161,4 @@ }; }; -/include/ "fsl/mpc8548si-post.dtsi" +/include/ "mpc8548si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi index 4ece1edbff63..88cd70de4f86 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi @@ -32,13 +32,14 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -global-utilities@e1000 { +clockgen: global-utilities@e1000 { compatible = "fsl,qoriq-clockgen-1.0"; ranges = <0x0 0xe1000 0x1000>; reg = <0xe1000 0x1000>; clock-frequency = <0>; #address-cells = <1>; #size-cells = <1>; + #clock-cells = <2>; sysclk: sysclk { #clock-cells = <0>; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi index 48e0b6e4ce33..6dfd7c5357ab 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi @@ -32,12 +32,13 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -global-utilities@e1000 { +clockgen: global-utilities@e1000 { compatible = "fsl,qoriq-clockgen-2.0"; ranges = <0x0 0xe1000 0x1000>; reg = <0xe1000 0x1000>; #address-cells = <1>; #size-cells = <1>; + #clock-cells = <2>; sysclk: sysclk { #clock-cells = <0>; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-10g-0.dtsi new file mode 100644 index 000000000000..eb77675c255a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-10g-0.dtsi @@ -0,0 +1,62 @@ +/* + * QorIQ FMan 10g port #0 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x10: port@90000 { + cell-index = <0x10>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x90000 0x1000>; + }; + + fman0_tx_0x30: port@b0000 { + cell-index = <0x30>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xb0000 0x1000>; + }; + + ethernet@f0000 { + cell-index = <0x8>; + compatible = "fsl,fman-xgec"; + reg = <0xf0000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>; + }; + + xmdio0: mdio@f1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-xmdio"; + reg = <0xf1000 0x1000>; + interrupts = <101 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-0.dtsi new file mode 100644 index 000000000000..b965bc219bae --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-0.dtsi @@ -0,0 +1,69 @@ +/* + * QorIQ FMan 1g port #0 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x08: port@88000 { + cell-index = <0x8>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x88000 0x1000>; + }; + + fman0_tx_0x28: port@a8000 { + cell-index = <0x28>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xa8000 0x1000>; + }; + + ethernet@e0000 { + cell-index = <0>; + compatible = "fsl,fman-dtsec"; + reg = <0xe0000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>; + tbi-handle = <&tbi0>; + ptp-timer = <&ptp_timer0>; + }; + + mdio0: mdio@e1120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe1120 0xee0>; + interrupts = <100 2 0 0>; + + tbi0: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-1.dtsi new file mode 100644 index 000000000000..9eb6e6dd7cf9 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-1.dtsi @@ -0,0 +1,68 @@ +/* + * QorIQ FMan 1g port #1 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x09: port@89000 { + cell-index = <0x9>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x89000 0x1000>; + }; + + fman0_tx_0x29: port@a9000 { + cell-index = <0x29>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xa9000 0x1000>; + }; + + ethernet@e2000 { + cell-index = <1>; + compatible = "fsl,fman-dtsec"; + reg = <0xe2000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>; + tbi-handle = <&tbi1>; + ptp-timer = <&ptp_timer0>; + }; + + mdio@e3120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe3120 0xee0>; + + tbi1: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-2.dtsi new file mode 100644 index 000000000000..092b89936743 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-2.dtsi @@ -0,0 +1,68 @@ +/* + * QorIQ FMan 1g port #2 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x0a: port@8a000 { + cell-index = <0xa>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x8a000 0x1000>; + }; + + fman0_tx_0x2a: port@aa000 { + cell-index = <0x2a>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xaa000 0x1000>; + }; + + ethernet@e4000 { + cell-index = <2>; + compatible = "fsl,fman-dtsec"; + reg = <0xe4000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>; + tbi-handle = <&tbi2>; + ptp-timer = <&ptp_timer0>; + }; + + mdio@e5120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe5120 0xee0>; + + tbi2: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-3.dtsi new file mode 100644 index 000000000000..2df0dc876045 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-3.dtsi @@ -0,0 +1,68 @@ +/* + * QorIQ FMan 1g port #3 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x0b: port@8b000 { + cell-index = <0xb>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x8b000 0x1000>; + }; + + fman0_tx_0x2b: port@ab000 { + cell-index = <0x2b>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xab000 0x1000>; + }; + + ethernet@e6000 { + cell-index = <3>; + compatible = "fsl,fman-dtsec"; + reg = <0xe6000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>; + tbi-handle = <&tbi3>; + ptp-timer = <&ptp_timer0>; + }; + + mdio@e7120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe7120 0xee0>; + + tbi3: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-4.dtsi new file mode 100644 index 000000000000..5fceb2438fdc --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-4.dtsi @@ -0,0 +1,68 @@ +/* + * QorIQ FMan 1g port #4 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x0c: port@8c000 { + cell-index = <0xc>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x8c000 0x1000>; + }; + + fman0_tx_0x2c: port@ac000 { + cell-index = <0x2c>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xac000 0x1000>; + }; + + ethernet@e8000 { + cell-index = <4>; + compatible = "fsl,fman-dtsec"; + reg = <0xe8000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>; + tbi-handle = <&tbi4>; + ptp-timer = <&ptp_timer0>; + }; + + mdio@e9120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe9120 0xee0>; + + tbi4: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0.dtsi new file mode 100644 index 000000000000..abd01d466de4 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0.dtsi @@ -0,0 +1,101 @@ +/* + * QorIQ FMan device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman0: fman@400000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + compatible = "fsl,fman"; + ranges = <0 0x400000 0x100000>; + reg = <0x400000 0x100000>; + interrupts = <96 2 0 0>, <16 2 1 1>; + clocks = <&clockgen 3 0>; + clock-names = "fmanclk"; + fsl,qman-channel-range = <0x40 0xc>; + + muram@0 { + compatible = "fsl,fman-muram"; + reg = <0x0 0x28000>; + }; + + fman0_oh_0x1: port@81000 { + cell-index = <0x1>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x81000 0x1000>; + }; + + fman0_oh_0x2: port@82000 { + cell-index = <0x2>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x82000 0x1000>; + }; + + fman0_oh_0x3: port@83000 { + cell-index = <0x3>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x83000 0x1000>; + }; + + fman0_oh_0x4: port@84000 { + cell-index = <0x4>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x84000 0x1000>; + }; + + fman0_oh_0x5: port@85000 { + cell-index = <0x5>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x85000 0x1000>; + status = "disabled"; + }; + + fman0_oh_0x6: port@86000 { + cell-index = <0x6>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x86000 0x1000>; + status = "disabled"; + }; + + fman0_oh_0x7: port@87000 { + cell-index = <0x7>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x87000 0x1000>; + status = "disabled"; + }; + + ptp_timer0: ptp-timer@fe000 { + compatible = "fsl,fman-ptp-timer"; + reg = <0xfe000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-10g-0.dtsi new file mode 100644 index 000000000000..83ae87b69d92 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-10g-0.dtsi @@ -0,0 +1,61 @@ +/* + * QorIQ FMan 10g port #0 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x10: port@90000 { + cell-index = <0x10>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x90000 0x1000>; + }; + + fman1_tx_0x30: port@b0000 { + cell-index = <0x30>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xb0000 0x1000>; + }; + + ethernet@f0000 { + cell-index = <0x8>; + compatible = "fsl,fman-xgec"; + reg = <0xf0000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>; + }; + + mdio@f1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-xmdio"; + reg = <0xf1000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-0.dtsi new file mode 100644 index 000000000000..b0f0e36a4eac --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-0.dtsi @@ -0,0 +1,68 @@ +/* + * QorIQ FMan 1g port #0 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x08: port@88000 { + cell-index = <0x8>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x88000 0x1000>; + }; + + fman1_tx_0x28: port@a8000 { + cell-index = <0x28>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xa8000 0x1000>; + }; + + ethernet@e0000 { + cell-index = <0>; + compatible = "fsl,fman-dtsec"; + reg = <0xe0000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x08 &fman1_tx_0x28>; + tbi-handle = <&tbi5>; + ptp-timer = <&ptp_timer1>; + }; + + mdio@e1120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe1120 0xee0>; + + tbi5: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-1.dtsi new file mode 100644 index 000000000000..a3a79f8552a3 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-1.dtsi @@ -0,0 +1,68 @@ +/* + * QorIQ FMan 1g port #1 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x09: port@89000 { + cell-index = <0x9>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x89000 0x1000>; + }; + + fman1_tx_0x29: port@a9000 { + cell-index = <0x29>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xa9000 0x1000>; + }; + + ethernet@e2000 { + cell-index = <1>; + compatible = "fsl,fman-dtsec"; + reg = <0xe2000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x09 &fman1_tx_0x29>; + tbi-handle = <&tbi6>; + ptp-timer = <&ptp_timer1>; + }; + + mdio@e3120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe3120 0xee0>; + + tbi6: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-2.dtsi new file mode 100644 index 000000000000..96a69a84b8a8 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-2.dtsi @@ -0,0 +1,68 @@ +/* + * QorIQ FMan 1g port #2 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x0a: port@8a000 { + cell-index = <0xa>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x8a000 0x1000>; + }; + + fman1_tx_0x2a: port@aa000 { + cell-index = <0x2a>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xaa000 0x1000>; + }; + + ethernet@e4000 { + cell-index = <2>; + compatible = "fsl,fman-dtsec"; + reg = <0xe4000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x0a &fman1_tx_0x2a>; + tbi-handle = <&tbi7>; + ptp-timer = <&ptp_timer1>; + }; + + mdio@e5120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe5120 0xee0>; + + tbi7: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-3.dtsi new file mode 100644 index 000000000000..7405d1940133 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-3.dtsi @@ -0,0 +1,68 @@ +/* + * QorIQ FMan 1g port #3 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x0b: port@8b000 { + cell-index = <0xb>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x8b000 0x1000>; + }; + + fman1_tx_0x2b: port@ab000 { + cell-index = <0x2b>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xab000 0x1000>; + }; + + ethernet@e6000 { + cell-index = <3>; + compatible = "fsl,fman-dtsec"; + reg = <0xe6000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x0b &fman1_tx_0x2b>; + tbi-handle = <&tbi8>; + ptp-timer = <&ptp_timer1>; + }; + + mdio@e7120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe7120 0xee0>; + + tbi8: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-4.dtsi new file mode 100644 index 000000000000..f49ad69e5212 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-4.dtsi @@ -0,0 +1,68 @@ +/* + * QorIQ FMan 1g port #4 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x0c: port@8c000 { + cell-index = <0xc>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x8c000 0x1000>; + }; + + fman1_tx_0x2c: port@ac000 { + cell-index = <0x2c>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xac000 0x1000>; + }; + + ethernet@e8000 { + cell-index = <4>; + compatible = "fsl,fman-dtsec"; + reg = <0xe8000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x0c &fman1_tx_0x2c>; + tbi-handle = <&tbi9>; + ptp-timer = <&ptp_timer1>; + }; + + mdio@e9120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe9120 0xee0>; + + tbi9: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1.dtsi new file mode 100644 index 000000000000..debea75fd3f0 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1.dtsi @@ -0,0 +1,101 @@ +/* + * QorIQ FMan device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman1: fman@500000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + compatible = "fsl,fman"; + ranges = <0 0x500000 0x100000>; + reg = <0x500000 0x100000>; + interrupts = <97 2 0 0>, <16 2 1 0>; + clocks = <&clockgen 3 1>; + clock-names = "fmanclk"; + fsl,qman-channel-range = <0x60 0xc>; + + muram@0 { + compatible = "fsl,fman-muram"; + reg = <0x0 0x28000>; + }; + + fman1_oh_0x1: port@81000 { + cell-index = <0x1>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x81000 0x1000>; + }; + + fman1_oh_0x2: port@82000 { + cell-index = <0x2>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x82000 0x1000>; + }; + + fman1_oh_0x3: port@83000 { + cell-index = <0x3>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x83000 0x1000>; + }; + + fman1_oh_0x4: port@84000 { + cell-index = <0x4>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x84000 0x1000>; + }; + + fman1_oh_0x5: port@85000 { + cell-index = <0x5>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x85000 0x1000>; + status = "disabled"; + }; + + fman1_oh_0x6: port@86000 { + cell-index = <0x6>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x86000 0x1000>; + status = "disabled"; + }; + + fman1_oh_0x7: port@87000 { + cell-index = <0x7>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x87000 0x1000>; + status = "disabled"; + }; + + ptp_timer1: ptp-timer@fe000 { + compatible = "fsl,fman-ptp-timer"; + reg = <0xfe000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi new file mode 100644 index 000000000000..2e441fab6d8f --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi @@ -0,0 +1,66 @@ +/* + * QorIQ FMan v3 1g port #0 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x08: port@88000 { + cell-index = <0x8>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x88000 0x1000>; + fsl,fman-10g-port; + fsl,fman-best-effort-port; + }; + + fman0_tx_0x28: port@a8000 { + cell-index = <0x28>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xa8000 0x1000>; + fsl,fman-10g-port; + fsl,fman-best-effort-port; + }; + + ethernet@e0000 { + cell-index = <0>; + compatible = "fsl,fman-memac"; + reg = <0xe0000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>; + ptp-timer = <&ptp_timer0>; + }; + + mdio@e1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe1000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi new file mode 100644 index 000000000000..0b8f87f79d15 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi @@ -0,0 +1,63 @@ +/* + * QorIQ FMan v3 10g port #0 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x10: port@90000 { + cell-index = <0x10>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x90000 0x1000>; + fsl,fman-10g-port; + }; + + fman0_tx_0x30: port@b0000 { + cell-index = <0x30>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xb0000 0x1000>; + fsl,fman-10g-port; + }; + + ethernet@f0000 { + cell-index = <0x8>; + compatible = "fsl,fman-memac"; + reg = <0xf0000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>; + }; + + mdio@f1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xf1000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi new file mode 100644 index 000000000000..ba6f2275d3f6 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi @@ -0,0 +1,66 @@ +/* + * QorIQ FMan v3 1g port #1 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x09: port@89000 { + cell-index = <0x9>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x89000 0x1000>; + fsl,fman-10g-port; + fsl,fman-best-effort-port; + }; + + fman0_tx_0x29: port@a9000 { + cell-index = <0x29>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xa9000 0x1000>; + fsl,fman-10g-port; + fsl,fman-best-effort-port; + }; + + ethernet@e2000 { + cell-index = <1>; + compatible = "fsl,fman-memac"; + reg = <0xe2000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>; + ptp-timer = <&ptp_timer0>; + }; + + mdio@e3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe3000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi new file mode 100644 index 000000000000..886003805592 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi @@ -0,0 +1,63 @@ +/* + * QorIQ FMan v3 10g port #1 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x11: port@91000 { + cell-index = <0x11>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x91000 0x1000>; + fsl,fman-10g-port; + }; + + fman0_tx_0x31: port@b1000 { + cell-index = <0x31>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xb1000 0x1000>; + fsl,fman-10g-port; + }; + + ethernet@f2000 { + cell-index = <0x9>; + compatible = "fsl,fman-memac"; + reg = <0xf2000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x11 &fman0_tx_0x31>; + }; + + mdio@f3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xf3000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi new file mode 100644 index 000000000000..ace9c13648ce --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi @@ -0,0 +1,62 @@ +/* + * QorIQ FMan v3 1g port #0 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x08: port@88000 { + cell-index = <0x8>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x88000 0x1000>; + }; + + fman0_tx_0x28: port@a8000 { + cell-index = <0x28>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xa8000 0x1000>; + }; + + ethernet@e0000 { + cell-index = <0>; + compatible = "fsl,fman-memac"; + reg = <0xe0000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>; + ptp-timer = <&ptp_timer0>; + }; + + mdio@e1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe1000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi new file mode 100644 index 000000000000..a4fc28654b31 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi @@ -0,0 +1,62 @@ +/* + * QorIQ FMan v3 1g port #1 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x09: port@89000 { + cell-index = <0x9>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x89000 0x1000>; + }; + + fman0_tx_0x29: port@a9000 { + cell-index = <0x29>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xa9000 0x1000>; + }; + + ethernet@e2000 { + cell-index = <1>; + compatible = "fsl,fman-memac"; + reg = <0xe2000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>; + ptp-timer = <&ptp_timer0>; + }; + + mdio@e3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe3000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi new file mode 100644 index 000000000000..78596faadf99 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi @@ -0,0 +1,62 @@ +/* + * QorIQ FMan v3 1g port #2 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x0a: port@8a000 { + cell-index = <0xa>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x8a000 0x1000>; + }; + + fman0_tx_0x2a: port@aa000 { + cell-index = <0x2a>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xaa000 0x1000>; + }; + + ethernet@e4000 { + cell-index = <2>; + compatible = "fsl,fman-memac"; + reg = <0xe4000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>; + ptp-timer = <&ptp_timer0>; + }; + + mdio@e5000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe5000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi new file mode 100644 index 000000000000..af93abd86d78 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi @@ -0,0 +1,62 @@ +/* + * QorIQ FMan v3 1g port #3 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x0b: port@8b000 { + cell-index = <0xb>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x8b000 0x1000>; + }; + + fman0_tx_0x2b: port@ab000 { + cell-index = <0x2b>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xab000 0x1000>; + }; + + ethernet@e6000 { + cell-index = <3>; + compatible = "fsl,fman-memac"; + reg = <0xe6000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>; + ptp-timer = <&ptp_timer0>; + }; + + mdio@e7000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe7000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi new file mode 100644 index 000000000000..97cffd74bf3d --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi @@ -0,0 +1,62 @@ +/* + * QorIQ FMan v3 1g port #4 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x0c: port@8c000 { + cell-index = <0xc>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x8c000 0x1000>; + }; + + fman0_tx_0x2c: port@ac000 { + cell-index = <0x2c>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xac000 0x1000>; + }; + + ethernet@e8000 { + cell-index = <4>; + compatible = "fsl,fman-memac"; + reg = <0xe8000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>; + ptp-timer = <&ptp_timer0>; + }; + + mdio@e9000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe9000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi new file mode 100644 index 000000000000..232c5c277bdb --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi @@ -0,0 +1,62 @@ +/* + * QorIQ FMan v3 1g port #5 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x0d: port@8d000 { + cell-index = <0xd>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x8d000 0x1000>; + }; + + fman0_tx_0x2d: port@ad000 { + cell-index = <0x2d>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xad000 0x1000>; + }; + + ethernet@ea000 { + cell-index = <5>; + compatible = "fsl,fman-memac"; + reg = <0xea000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x0d &fman0_tx_0x2d>; + ptp-timer = <&ptp_timer0>; + }; + + mdio@eb000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xeb000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0.dtsi new file mode 100644 index 000000000000..3a20e0d1a6d2 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0.dtsi @@ -0,0 +1,106 @@ +/* + * QorIQ FMan v3 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman0: fman@400000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + compatible = "fsl,fman"; + ranges = <0 0x400000 0x100000>; + reg = <0x400000 0x100000>; + interrupts = <96 2 0 0>, <16 2 1 1>; + clocks = <&clockgen 3 0>; + clock-names = "fmanclk"; + fsl,qman-channel-range = <0x800 0x10>; + + muram@0 { + compatible = "fsl,fman-muram"; + reg = <0x0 0x60000>; + }; + + fman0_oh_0x2: port@82000 { + cell-index = <0x2>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x82000 0x1000>; + }; + + fman0_oh_0x3: port@83000 { + cell-index = <0x3>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x83000 0x1000>; + }; + + fman0_oh_0x4: port@84000 { + cell-index = <0x4>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x84000 0x1000>; + }; + + fman0_oh_0x5: port@85000 { + cell-index = <0x5>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x85000 0x1000>; + }; + + fman0_oh_0x6: port@86000 { + cell-index = <0x6>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x86000 0x1000>; + }; + + fman0_oh_0x7: port@87000 { + cell-index = <0x7>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x87000 0x1000>; + }; + + mdio0: mdio@fc000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xfc000 0x1000>; + }; + + xmdio0: mdio@fd000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xfd000 0x1000>; + }; + + ptp_timer0: ptp-timer@fe000 { + compatible = "fsl,fman-ptp-timer"; + reg = <0xfe000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi new file mode 100644 index 000000000000..89d64ee282b0 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi @@ -0,0 +1,63 @@ +/* + * QorIQ FMan v3 10g port #0 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x10: port@90000 { + cell-index = <0x10>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x90000 0x1000>; + fsl,fman-10g-port; + }; + + fman1_tx_0x30: port@b0000 { + cell-index = <0x30>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xb0000 0x1000>; + fsl,fman-10g-port; + }; + + ethernet@f0000 { + cell-index = <0x8>; + compatible = "fsl,fman-memac"; + reg = <0xf0000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>; + }; + + mdio@f1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xf1000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi new file mode 100644 index 000000000000..7fa9260889c6 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi @@ -0,0 +1,63 @@ +/* + * QorIQ FMan v3 10g port #1 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x11: port@91000 { + cell-index = <0x11>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x91000 0x1000>; + fsl,fman-10g-port; + }; + + fman1_tx_0x31: port@b1000 { + cell-index = <0x31>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xb1000 0x1000>; + fsl,fman-10g-port; + }; + + ethernet@f2000 { + cell-index = <0x9>; + compatible = "fsl,fman-memac"; + reg = <0xf2000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x11 &fman1_tx_0x31>; + }; + + mdio@f3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xf3000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi new file mode 100644 index 000000000000..3d236662bf07 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi @@ -0,0 +1,62 @@ +/* + * QorIQ FMan v3 1g port #0 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x08: port@88000 { + cell-index = <0x8>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x88000 0x1000>; + }; + + fman1_tx_0x28: port@a8000 { + cell-index = <0x28>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xa8000 0x1000>; + }; + + ethernet@e0000 { + cell-index = <0>; + compatible = "fsl,fman-memac"; + reg = <0xe0000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x08 &fman1_tx_0x28>; + ptp-timer = <&ptp_timer1>; + }; + + mdio@e1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe1000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi new file mode 100644 index 000000000000..97dc2eedd462 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi @@ -0,0 +1,62 @@ +/* + * QorIQ FMan v3 1g port #1 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x09: port@89000 { + cell-index = <0x9>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x89000 0x1000>; + }; + + fman1_tx_0x29: port@a9000 { + cell-index = <0x29>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xa9000 0x1000>; + }; + + ethernet@e2000 { + cell-index = <1>; + compatible = "fsl,fman-memac"; + reg = <0xe2000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x09 &fman1_tx_0x29>; + ptp-timer = <&ptp_timer1>; + }; + + mdio@e3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe3000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi new file mode 100644 index 000000000000..f084dd2f0bec --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi @@ -0,0 +1,62 @@ +/* + * QorIQ FMan v3 1g port #2 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x0a: port@8a000 { + cell-index = <0xa>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x8a000 0x1000>; + }; + + fman1_tx_0x2a: port@aa000 { + cell-index = <0x2a>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xaa000 0x1000>; + }; + + ethernet@e4000 { + cell-index = <2>; + compatible = "fsl,fman-memac"; + reg = <0xe4000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x0a &fman1_tx_0x2a>; + ptp-timer = <&ptp_timer1>; + }; + + mdio@e5000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe5000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi new file mode 100644 index 000000000000..bb627b3bf3db --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi @@ -0,0 +1,62 @@ +/* + * QorIQ FMan v3 1g port #3 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x0b: port@8b000 { + cell-index = <0xb>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x8b000 0x1000>; + }; + + fman1_tx_0x2b: port@ab000 { + cell-index = <0x2b>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xab000 0x1000>; + }; + + ethernet@e6000 { + cell-index = <3>; + compatible = "fsl,fman-memac"; + reg = <0xe6000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x0b &fman1_tx_0x2b>; + ptp-timer = <&ptp_timer1>; + }; + + mdio@e7000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe7000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi new file mode 100644 index 000000000000..821ed12225d4 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi @@ -0,0 +1,62 @@ +/* + * QorIQ FMan v3 1g port #4 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x0c: port@8c000 { + cell-index = <0xc>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x8c000 0x1000>; + }; + + fman1_tx_0x2c: port@ac000 { + cell-index = <0x2c>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xac000 0x1000>; + }; + + ethernet@e8000 { + cell-index = <4>; + compatible = "fsl,fman-memac"; + reg = <0xe8000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x0c &fman1_tx_0x2c>; + ptp-timer = <&ptp_timer1>; + }; + + mdio@e9000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe9000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi new file mode 100644 index 000000000000..e245f1a1e42a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi @@ -0,0 +1,62 @@ +/* + * QorIQ FMan v3 1g port #5 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x0d: port@8d000 { + cell-index = <0xd>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x8d000 0x1000>; + }; + + fman1_tx_0x2d: port@ad000 { + cell-index = <0x2d>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xad000 0x1000>; + }; + + ethernet@ea000 { + cell-index = <5>; + compatible = "fsl,fman-memac"; + reg = <0xea000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x0d &fman1_tx_0x2d>; + ptp-timer = <&ptp_timer1>; + }; + + mdio@eb000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xeb000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1.dtsi new file mode 100644 index 000000000000..82750ac944c7 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1.dtsi @@ -0,0 +1,106 @@ +/* + * QorIQ FMan v3 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman1: fman@500000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + compatible = "fsl,fman"; + ranges = <0 0x500000 0x100000>; + reg = <0x500000 0x100000>; + interrupts = <97 2 0 0>, <16 2 1 0>; + clocks = <&clockgen 3 1>; + clock-names = "fmanclk"; + fsl,qman-channel-range = <0x820 0x10>; + + muram@0 { + compatible = "fsl,fman-muram"; + reg = <0x0 0x60000>; + }; + + fman1_oh_0x2: port@82000 { + cell-index = <0x2>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x82000 0x1000>; + }; + + fman1_oh_0x3: port@83000 { + cell-index = <0x3>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x83000 0x1000>; + }; + + fman1_oh_0x4: port@84000 { + cell-index = <0x4>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x84000 0x1000>; + }; + + fman1_oh_0x5: port@85000 { + cell-index = <0x5>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x85000 0x1000>; + }; + + fman1_oh_0x6: port@86000 { + cell-index = <0x6>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x86000 0x1000>; + }; + + fman1_oh_0x7: port@87000 { + cell-index = <0x7>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x87000 0x1000>; + }; + + mdio1: mdio@fc000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xfc000 0x1000>; + }; + + mdio@fd000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xfd000 0x1000>; + }; + + ptp_timer1: ptp-timer@fe000 { + compatible = "fsl,fman-ptp-timer"; + reg = <0xfe000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi new file mode 100644 index 000000000000..7f60b6060176 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi @@ -0,0 +1,94 @@ +/* + * QorIQ FMan v3 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman0: fman@400000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + compatible = "fsl,fman"; + ranges = <0 0x400000 0x100000>; + reg = <0x400000 0x100000>; + interrupts = <96 2 0 0>, <16 2 1 1>; + clocks = <&clockgen 3 0>; + clock-names = "fmanclk"; + fsl,qman-channel-range = <0x800 0x10>; + + muram@0 { + compatible = "fsl,fman-muram"; + reg = <0x0 0x30000>; + }; + + fman0_oh_0x2: port@82000 { + cell-index = <0x2>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x82000 0x1000>; + }; + + fman0_oh_0x3: port@83000 { + cell-index = <0x3>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x83000 0x1000>; + }; + + fman0_oh_0x4: port@84000 { + cell-index = <0x4>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x84000 0x1000>; + }; + + fman0_oh_0x5: port@85000 { + cell-index = <0x5>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x85000 0x1000>; + }; + + mdio0: mdio@fc000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xfc000 0x1000>; + }; + + xmdio0: mdio@fd000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xfd000 0x1000>; + }; + + ptp_timer0: ptp-timer@fe000 { + compatible = "fsl,fman-ptp-timer"; + reg = <0xfe000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/t1023rdb.dts b/arch/powerpc/boot/dts/fsl/t1023rdb.dts index d3fa8294cd49..2b2fff4a12a2 100644 --- a/arch/powerpc/boot/dts/t1023rdb.dts +++ b/arch/powerpc/boot/dts/fsl/t1023rdb.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/t102xsi-pre.dtsi" +/include/ "t102xsi-pre.dtsi" / { model = "fsl,T1023RDB"; @@ -159,4 +159,4 @@ }; }; -/include/ "fsl/t1023si-post.dtsi" +/include/ "t1023si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi index df1f068a5376..518ddaa8da2d 100644 --- a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi @@ -327,4 +327,23 @@ }; /include/ "qoriq-sec5.0-0.dtsi" + +/include/ "qoriq-fman3l-0.dtsi" +/include/ "qoriq-fman3-0-10g-0-best-effort.dtsi" +/include/ "qoriq-fman3-0-1g-1.dtsi" +/include/ "qoriq-fman3-0-1g-2.dtsi" +/include/ "qoriq-fman3-0-1g-3.dtsi" + fman@400000 { + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + }; }; diff --git a/arch/powerpc/boot/dts/t1024qds.dts b/arch/powerpc/boot/dts/fsl/t1024qds.dts index f31fabb383b9..43cd5b50cd0a 100644 --- a/arch/powerpc/boot/dts/t1024qds.dts +++ b/arch/powerpc/boot/dts/fsl/t1024qds.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/t102xsi-pre.dtsi" +/include/ "t102xsi-pre.dtsi" / { model = "fsl,T1024QDS"; @@ -248,4 +248,4 @@ }; }; -/include/ "fsl/t1024si-post.dtsi" +/include/ "t1024si-post.dtsi" diff --git a/arch/powerpc/boot/dts/t1024rdb.dts b/arch/powerpc/boot/dts/fsl/t1024rdb.dts index bf05e324fda2..429d8c73650a 100644 --- a/arch/powerpc/boot/dts/t1024rdb.dts +++ b/arch/powerpc/boot/dts/fsl/t1024rdb.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/t102xsi-pre.dtsi" +/include/ "t102xsi-pre.dtsi" / { model = "fsl,T1024RDB"; @@ -188,4 +188,4 @@ }; }; -/include/ "fsl/t1024si-post.dtsi" +/include/ "t1024si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi index 1f1a9f8474d5..3e1528abf3f4 100644 --- a/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi @@ -59,6 +59,12 @@ sdhc = &sdhc; crypto = &crypto; + + fman0 = &fman0; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; }; cpus { diff --git a/arch/powerpc/boot/dts/t1040d4rdb.dts b/arch/powerpc/boot/dts/fsl/t1040d4rdb.dts index 2d1315a1670e..681746efd31d 100644 --- a/arch/powerpc/boot/dts/t1040d4rdb.dts +++ b/arch/powerpc/boot/dts/fsl/t1040d4rdb.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/t104xsi-pre.dtsi" +/include/ "t104xsi-pre.dtsi" /include/ "t104xd4rdb.dtsi" / { @@ -43,4 +43,4 @@ interrupt-parent = <&mpic>; }; -/include/ "fsl/t1040si-post.dtsi" +/include/ "t1040si-post.dtsi" diff --git a/arch/powerpc/boot/dts/t1040qds.dts b/arch/powerpc/boot/dts/fsl/t1040qds.dts index 973c29c2f56e..4d298659468c 100644 --- a/arch/powerpc/boot/dts/t1040qds.dts +++ b/arch/powerpc/boot/dts/fsl/t1040qds.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/t104xsi-pre.dtsi" +/include/ "t104xsi-pre.dtsi" /include/ "t104xqds.dtsi" / { @@ -43,4 +43,4 @@ interrupt-parent = <&mpic>; }; -/include/ "fsl/t1040si-post.dtsi" +/include/ "t1040si-post.dtsi" diff --git a/arch/powerpc/boot/dts/t1040rdb.dts b/arch/powerpc/boot/dts/fsl/t1040rdb.dts index 79a0bed04c1a..8f9e65b47515 100644 --- a/arch/powerpc/boot/dts/t1040rdb.dts +++ b/arch/powerpc/boot/dts/fsl/t1040rdb.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/t104xsi-pre.dtsi" +/include/ "t104xsi-pre.dtsi" /include/ "t104xrdb.dtsi" / { @@ -45,4 +45,4 @@ }; }; -/include/ "fsl/t1040si-post.dtsi" +/include/ "t1040si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi index 9770d0278493..d30b3de1cfc5 100644 --- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi @@ -547,4 +547,35 @@ /include/ "qoriq-sec5.0-0.dtsi" /include/ "qoriq-qman3.dtsi" /include/ "qoriq-bman1.dtsi" + +/include/ "qoriq-fman3l-0.dtsi" +/include/ "qoriq-fman3-0-1g-0.dtsi" +/include/ "qoriq-fman3-0-1g-1.dtsi" +/include/ "qoriq-fman3-0-1g-2.dtsi" +/include/ "qoriq-fman3-0-1g-3.dtsi" +/include/ "qoriq-fman3-0-1g-4.dtsi" + fman@400000 { + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + + enet4: ethernet@e8000 { + }; + + mdio@fc000 { + interrupts = <100 1 0 0>; + }; + + mdio@fd000 { + status = "disabled"; + }; + }; }; diff --git a/arch/powerpc/boot/dts/t1042d4rdb.dts b/arch/powerpc/boot/dts/fsl/t1042d4rdb.dts index 846f8c87e85a..b245b31b8279 100644 --- a/arch/powerpc/boot/dts/t1042d4rdb.dts +++ b/arch/powerpc/boot/dts/fsl/t1042d4rdb.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/t104xsi-pre.dtsi" +/include/ "t104xsi-pre.dtsi" /include/ "t104xd4rdb.dtsi" / { @@ -50,4 +50,4 @@ }; }; -/include/ "fsl/t1040si-post.dtsi" +/include/ "t1040si-post.dtsi" diff --git a/arch/powerpc/boot/dts/t1042qds.dts b/arch/powerpc/boot/dts/fsl/t1042qds.dts index 45bd03752154..4ab9bbe7c5c5 100644 --- a/arch/powerpc/boot/dts/t1042qds.dts +++ b/arch/powerpc/boot/dts/fsl/t1042qds.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/t104xsi-pre.dtsi" +/include/ "t104xsi-pre.dtsi" /include/ "t104xqds.dtsi" / { @@ -43,4 +43,4 @@ interrupt-parent = <&mpic>; }; -/include/ "fsl/t1042si-post.dtsi" +/include/ "t1042si-post.dtsi" diff --git a/arch/powerpc/boot/dts/t1042rdb.dts b/arch/powerpc/boot/dts/fsl/t1042rdb.dts index 738c23790e94..67af56bc5ee9 100644 --- a/arch/powerpc/boot/dts/t1042rdb.dts +++ b/arch/powerpc/boot/dts/fsl/t1042rdb.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/t104xsi-pre.dtsi" +/include/ "t104xsi-pre.dtsi" /include/ "t104xrdb.dtsi" / { @@ -45,4 +45,4 @@ }; }; -/include/ "fsl/t1042si-post.dtsi" +/include/ "t1042si-post.dtsi" diff --git a/arch/powerpc/boot/dts/t1042rdb_pi.dts b/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts index 634f751fa6d3..2f67677530a4 100644 --- a/arch/powerpc/boot/dts/t1042rdb_pi.dts +++ b/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/t104xsi-pre.dtsi" +/include/ "t104xsi-pre.dtsi" /include/ "t104xrdb.dtsi" / { @@ -54,4 +54,4 @@ }; }; -/include/ "fsl/t1042si-post.dtsi" +/include/ "t1042si-post.dtsi" diff --git a/arch/powerpc/boot/dts/t104xd4rdb.dtsi b/arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi index 491367bd3883..3f6d7c6a106b 100644 --- a/arch/powerpc/boot/dts/t104xd4rdb.dtsi +++ b/arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi @@ -109,6 +109,16 @@ /* input clock */ spi-max-frequency = <10000000>; }; + slic@1 { + compatible = "maxim,ds26522"; + reg = <1>; + spi-max-frequency = <2000000>; /* input clock */ + }; + slic@2 { + compatible = "maxim,ds26522"; + reg = <2>; + spi-max-frequency = <2000000>; /* input clock */ + }; }; i2c@118000 { hwmon@4c { diff --git a/arch/powerpc/boot/dts/t104xqds.dtsi b/arch/powerpc/boot/dts/fsl/t104xqds.dtsi index 1498d1e4aecf..1498d1e4aecf 100644 --- a/arch/powerpc/boot/dts/t104xqds.dtsi +++ b/arch/powerpc/boot/dts/fsl/t104xqds.dtsi diff --git a/arch/powerpc/boot/dts/t104xrdb.dtsi b/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi index 830ea484295b..830ea484295b 100644 --- a/arch/powerpc/boot/dts/t104xrdb.dtsi +++ b/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi diff --git a/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi index bbb7025ca9c2..fcfa38ae5e02 100644 --- a/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi @@ -1,7 +1,7 @@ /* * T1040/T1042 Silicon/SoC Device Tree Source (pre include) * - * Copyright 2013 Freescale Semiconductor Inc. + * Copyright 2013-2014 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -58,6 +58,13 @@ sdhc = &sdhc; crypto = &crypto; + + fman0 = &fman0; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; }; cpus { diff --git a/arch/powerpc/boot/dts/t2080qds.dts b/arch/powerpc/boot/dts/fsl/t2080qds.dts index aa1d6d8c169b..9c8e10fe04cb 100644 --- a/arch/powerpc/boot/dts/t2080qds.dts +++ b/arch/powerpc/boot/dts/fsl/t2080qds.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/t208xsi-pre.dtsi" +/include/ "t208xsi-pre.dtsi" /include/ "t208xqds.dtsi" / { @@ -54,4 +54,4 @@ }; }; -/include/ "fsl/t2080si-post.dtsi" +/include/ "t2080si-post.dtsi" diff --git a/arch/powerpc/boot/dts/t2080rdb.dts b/arch/powerpc/boot/dts/fsl/t2080rdb.dts index e8891047600c..33205bf08919 100644 --- a/arch/powerpc/boot/dts/t2080rdb.dts +++ b/arch/powerpc/boot/dts/fsl/t2080rdb.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/t208xsi-pre.dtsi" +/include/ "t208xsi-pre.dtsi" /include/ "t208xrdb.dtsi" / { @@ -54,4 +54,4 @@ }; }; -/include/ "fsl/t2080si-post.dtsi" +/include/ "t2080si-post.dtsi" diff --git a/arch/powerpc/boot/dts/t2081qds.dts b/arch/powerpc/boot/dts/fsl/t2081qds.dts index 8ec80a71e102..b81213596dbf 100644 --- a/arch/powerpc/boot/dts/t2081qds.dts +++ b/arch/powerpc/boot/dts/fsl/t2081qds.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/t208xsi-pre.dtsi" +/include/ "t208xsi-pre.dtsi" /include/ "t208xqds.dtsi" / { @@ -43,4 +43,4 @@ interrupt-parent = <&mpic>; }; -/include/ "fsl/t2081si-post.dtsi" +/include/ "t2081si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi index 32c790ae7fde..c744569a20e1 100644 --- a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi @@ -630,6 +630,49 @@ /include/ "qoriq-qman3.dtsi" /include/ "qoriq-bman1.dtsi" +/include/ "qoriq-fman3-0.dtsi" +/include/ "qoriq-fman3-0-1g-0.dtsi" +/include/ "qoriq-fman3-0-1g-1.dtsi" +/include/ "qoriq-fman3-0-1g-2.dtsi" +/include/ "qoriq-fman3-0-1g-3.dtsi" +/include/ "qoriq-fman3-0-1g-4.dtsi" +/include/ "qoriq-fman3-0-1g-5.dtsi" +/include/ "qoriq-fman3-0-10g-0.dtsi" +/include/ "qoriq-fman3-0-10g-1.dtsi" + fman@400000 { + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + + enet4: ethernet@e8000 { + }; + + enet5: ethernet@ea000 { + }; + + enet6: ethernet@f0000 { + }; + + enet7: ethernet@f2000 { + }; + + mdio@fc000 { + interrupts = <100 1 0 0>; + }; + + mdio@fd000 { + interrupts = <101 1 0 0>; + }; + }; + L2_1: l2-cache-controller@c20000 { /* Cluster 0 L2 cache */ compatible = "fsl,t2080-l2-cache-controller"; diff --git a/arch/powerpc/boot/dts/t208xqds.dtsi b/arch/powerpc/boot/dts/fsl/t208xqds.dtsi index 869f9159b4d1..869f9159b4d1 100644 --- a/arch/powerpc/boot/dts/t208xqds.dtsi +++ b/arch/powerpc/boot/dts/fsl/t208xqds.dtsi diff --git a/arch/powerpc/boot/dts/t208xrdb.dtsi b/arch/powerpc/boot/dts/fsl/t208xrdb.dtsi index 693d2a8fa01c..693d2a8fa01c 100644 --- a/arch/powerpc/boot/dts/t208xrdb.dtsi +++ b/arch/powerpc/boot/dts/fsl/t208xrdb.dtsi diff --git a/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi index e71ceb0e1100..c2e57203910d 100644 --- a/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi @@ -51,6 +51,17 @@ serial3 = &serial3; crypto = &crypto; + + fman0 = &fman0; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; + ethernet5 = &enet5; + ethernet6 = &enet6; + ethernet7 = &enet7; + pci0 = &pci0; pci1 = &pci1; pci2 = &pci2; diff --git a/arch/powerpc/boot/dts/t4240qds.dts b/arch/powerpc/boot/dts/fsl/t4240qds.dts index 93722da10e16..c067a6533809 100644 --- a/arch/powerpc/boot/dts/t4240qds.dts +++ b/arch/powerpc/boot/dts/fsl/t4240qds.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/t4240si-pre.dtsi" +/include/ "t4240si-pre.dtsi" / { model = "fsl,T4240QDS"; @@ -307,4 +307,4 @@ }; }; -/include/ "fsl/t4240si-post.dtsi" +/include/ "t4240si-post.dtsi" diff --git a/arch/powerpc/boot/dts/t4240rdb.dts b/arch/powerpc/boot/dts/fsl/t4240rdb.dts index 993eb4b8a487..6e820a875621 100644 --- a/arch/powerpc/boot/dts/t4240rdb.dts +++ b/arch/powerpc/boot/dts/fsl/t4240rdb.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "fsl/t4240si-pre.dtsi" +/include/ "t4240si-pre.dtsi" / { model = "fsl,T4240RDB"; @@ -210,4 +210,4 @@ }; }; -/include/ "fsl/t4240si-post.dtsi" +/include/ "t4240si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi index d806360d0f64..68c4eadc19e3 100644 --- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi @@ -1,7 +1,7 @@ /* * T4240 Silicon/SoC Device Tree Source (post include) * - * Copyright 2012 - 2014 Freescale Semiconductor Inc. + * Copyright 2012 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -1068,6 +1068,92 @@ /include/ "qoriq-qman3.dtsi" /include/ "qoriq-bman1.dtsi" +/include/ "qoriq-fman3-0.dtsi" +/include/ "qoriq-fman3-0-1g-0.dtsi" +/include/ "qoriq-fman3-0-1g-1.dtsi" +/include/ "qoriq-fman3-0-1g-2.dtsi" +/include/ "qoriq-fman3-0-1g-3.dtsi" +/include/ "qoriq-fman3-0-1g-4.dtsi" +/include/ "qoriq-fman3-0-1g-5.dtsi" +/include/ "qoriq-fman3-0-10g-0.dtsi" +/include/ "qoriq-fman3-0-10g-1.dtsi" + fman@400000 { + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + + enet4: ethernet@e8000 { + }; + + enet5: ethernet@ea000 { + }; + + enet6: ethernet@f0000 { + }; + + enet7: ethernet@f2000 { + }; + + mdio@fc000 { + status = "disabled"; + }; + + mdio@fd000 { + status = "disabled"; + }; + }; + +/include/ "qoriq-fman3-1.dtsi" +/include/ "qoriq-fman3-1-1g-0.dtsi" +/include/ "qoriq-fman3-1-1g-1.dtsi" +/include/ "qoriq-fman3-1-1g-2.dtsi" +/include/ "qoriq-fman3-1-1g-3.dtsi" +/include/ "qoriq-fman3-1-1g-4.dtsi" +/include/ "qoriq-fman3-1-1g-5.dtsi" +/include/ "qoriq-fman3-1-10g-0.dtsi" +/include/ "qoriq-fman3-1-10g-1.dtsi" + fman@500000 { + enet8: ethernet@e0000 { + }; + + enet9: ethernet@e2000 { + }; + + enet10: ethernet@e4000 { + }; + + enet11: ethernet@e6000 { + }; + + enet12: ethernet@e8000 { + }; + + enet13: ethernet@ea000 { + }; + + enet14: ethernet@f0000 { + }; + + enet15: ethernet@f2000 { + }; + + mdio@fc000 { + interrupts = <100 1 0 0>; + }; + + mdio@fd000 { + interrupts = <101 1 0 0>; + }; + }; + L2_1: l2-cache-controller@c20000 { compatible = "fsl,t4240-l2-cache-controller"; reg = <0xc20000 0x40000>; diff --git a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi index 261a3abb1a55..1184a746fcb1 100644 --- a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi @@ -1,7 +1,7 @@ /* * T4240 Silicon/SoC Device Tree Source (pre include) * - * Copyright 2012 Freescale Semiconductor Inc. + * Copyright 2012 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -51,6 +51,7 @@ serial2 = &serial2; serial3 = &serial3; crypto = &crypto; + pci0 = &pci0; pci1 = &pci1; pci2 = &pci2; @@ -59,6 +60,25 @@ dma1 = &dma1; dma2 = &dma2; sdhc = &sdhc; + + fman0 = &fman0; + fman1 = &fman1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; + ethernet5 = &enet5; + ethernet6 = &enet6; + ethernet7 = &enet7; + ethernet8 = &enet8; + ethernet9 = &enet9; + ethernet10 = &enet10; + ethernet11 = &enet11; + ethernet12 = &enet12; + ethernet13 = &enet13; + ethernet14 = &enet14; + ethernet15 = &enet15; }; cpus { diff --git a/arch/powerpc/boot/dts/mpc5121.dtsi b/arch/powerpc/boot/dts/mpc5121.dtsi index 7f9d14f5c4da..a015e450437a 100644 --- a/arch/powerpc/boot/dts/mpc5121.dtsi +++ b/arch/powerpc/boot/dts/mpc5121.dtsi @@ -77,7 +77,6 @@ #address-cells = <2>; #size-cells = <1>; reg = <0x80000020 0x40>; - interrupts = <7 0x8>; ranges = <0x0 0x0 0xfc000000 0x04000000>; }; @@ -329,7 +328,15 @@ /* LocalPlus controller */ lpc@10000 { compatible = "fsl,mpc5121-lpc"; - reg = <0x10000 0x200>; + reg = <0x10000 0x100>; + }; + + sclpc@10100 { + compatible = "fsl,mpc512x-lpbfifo"; + reg = <0x10100 0x50>; + interrupts = <7 0x8>; + dmas = <&dma0 26>; + dma-names = "rx-tx"; }; pata@10200 { diff --git a/arch/powerpc/boot/dts/mpc5125twr.dts b/arch/powerpc/boot/dts/mpc5125twr.dts index e4f297471748..898eb58e49dd 100644 --- a/arch/powerpc/boot/dts/mpc5125twr.dts +++ b/arch/powerpc/boot/dts/mpc5125twr.dts @@ -246,6 +246,14 @@ status = "disabled"; }; + sclpc@10100 { + compatible = "fsl,mpc512x-lpbfifo"; + reg = <0x10100 0x50>; + interrupts = <7 0x8>; + dmas = <&dma0 26>; + dma-names = "rx-tx"; + }; + // 5125 PSCs are not 52xx or 5121 PSC compatible // PSC1 uart0 aka ttyPSC0 serial@11100 { @@ -279,10 +287,11 @@ clock-names = "ipg"; }; - dma@14000 { + dma0: dma@14000 { compatible = "fsl,mpc5121-dma"; // BSP name: "mpc512x-dma2" reg = <0x14000 0x1800>; interrupts = <65 0x8>; + #dma-cells = <1>; }; }; }; diff --git a/arch/powerpc/boot/dts/prpmc2800.dts b/arch/powerpc/boot/dts/prpmc2800.dts deleted file mode 100644 index 00afaacf8c8c..000000000000 --- a/arch/powerpc/boot/dts/prpmc2800.dts +++ /dev/null @@ -1,297 +0,0 @@ -/* Device Tree Source for Motorola PrPMC2800 - * - * Author: Mark A. Greer <mgreer@mvista.com> - * - * 2007 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Property values that are labeled as "Default" will be updated by bootwrapper - * if it can determine the exact PrPMC type. - */ - -/dts-v1/; - -/ { - #address-cells = <1>; - #size-cells = <1>; - model = "PrPMC280/PrPMC2800"; /* Default */ - compatible = "motorola,PrPMC2800"; - coherency-off; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,7447 { - device_type = "cpu"; - reg = <0>; - clock-frequency = <733333333>; /* Default */ - bus-frequency = <133333333>; - timebase-frequency = <33333333>; - i-cache-line-size = <32>; - d-cache-line-size = <32>; - i-cache-size = <32768>; - d-cache-size = <32768>; - }; - }; - - memory { - device_type = "memory"; - reg = <0x0 0x20000000>; /* Default (512MB) */ - }; - - system-controller@f1000000 { /* Marvell Discovery mv64360 */ - #address-cells = <1>; - #size-cells = <1>; - model = "mv64360"; /* Default */ - compatible = "marvell,mv64360"; - clock-frequency = <133333333>; - reg = <0xf1000000 0x10000>; - virtual-reg = <0xf1000000>; - ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */ - 0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */ - 0xa0000000 0xa0000000 0x4000000 /* User FLASH */ - 0x00000000 0xf1000000 0x0010000 /* Bridge's regs */ - 0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */ - - flash@a0000000 { - device_type = "rom"; - compatible = "direct-mapped"; - reg = <0xa0000000 0x4000000>; /* Default (64MB) */ - probe-type = "CFI"; - bank-width = <4>; - partitions = <0x00000000 0x00100000 /* RO */ - 0x00100000 0x00040001 /* RW */ - 0x00140000 0x00400000 /* RO */ - 0x00540000 0x039c0000 /* RO */ - 0x03f00000 0x00100000>; /* RO */ - partition-names = "FW Image A", "FW Config Data", "Kernel Image", "Filesystem", "FW Image B"; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,mv64360-mdio"; - PHY0: ethernet-phy@1 { - compatible = "broadcom,bcm5421"; - interrupts = <76>; /* GPP 12 */ - interrupt-parent = <&PIC>; - reg = <1>; - }; - PHY1: ethernet-phy@3 { - compatible = "broadcom,bcm5421"; - interrupts = <76>; /* GPP 12 */ - interrupt-parent = <&PIC>; - reg = <3>; - }; - }; - - ethernet-group@2000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,mv64360-eth-group"; - reg = <0x2000 0x2000>; - ethernet@0 { - device_type = "network"; - compatible = "marvell,mv64360-eth"; - reg = <0>; - interrupts = <32>; - interrupt-parent = <&PIC>; - phy = <&PHY0>; - local-mac-address = [ 00 00 00 00 00 00 ]; - }; - ethernet@1 { - device_type = "network"; - compatible = "marvell,mv64360-eth"; - reg = <1>; - interrupts = <33>; - interrupt-parent = <&PIC>; - phy = <&PHY1>; - local-mac-address = [ 00 00 00 00 00 00 ]; - }; - }; - - SDMA0: sdma@4000 { - compatible = "marvell,mv64360-sdma"; - reg = <0x4000 0xc18>; - virtual-reg = <0xf1004000>; - interrupts = <36>; - interrupt-parent = <&PIC>; - }; - - SDMA1: sdma@6000 { - compatible = "marvell,mv64360-sdma"; - reg = <0x6000 0xc18>; - virtual-reg = <0xf1006000>; - interrupts = <38>; - interrupt-parent = <&PIC>; - }; - - BRG0: brg@b200 { - compatible = "marvell,mv64360-brg"; - reg = <0xb200 0x8>; - clock-src = <8>; - clock-frequency = <133333333>; - current-speed = <9600>; - }; - - BRG1: brg@b208 { - compatible = "marvell,mv64360-brg"; - reg = <0xb208 0x8>; - clock-src = <8>; - clock-frequency = <133333333>; - current-speed = <9600>; - }; - - CUNIT: cunit@f200 { - reg = <0xf200 0x200>; - }; - - MPSCROUTING: mpscrouting@b400 { - reg = <0xb400 0xc>; - }; - - MPSCINTR: mpscintr@b800 { - reg = <0xb800 0x100>; - virtual-reg = <0xf100b800>; - }; - - MPSC0: mpsc@8000 { - compatible = "marvell,mv64360-mpsc"; - reg = <0x8000 0x38>; - virtual-reg = <0xf1008000>; - sdma = <&SDMA0>; - brg = <&BRG0>; - cunit = <&CUNIT>; - mpscrouting = <&MPSCROUTING>; - mpscintr = <&MPSCINTR>; - cell-index = <0>; - interrupts = <40>; - interrupt-parent = <&PIC>; - }; - - MPSC1: mpsc@9000 { - compatible = "marvell,mv64360-mpsc"; - reg = <0x9000 0x38>; - virtual-reg = <0xf1009000>; - sdma = <&SDMA1>; - brg = <&BRG1>; - cunit = <&CUNIT>; - mpscrouting = <&MPSCROUTING>; - mpscintr = <&MPSCINTR>; - cell-index = <1>; - interrupts = <42>; - interrupt-parent = <&PIC>; - }; - - wdt@b410 { /* watchdog timer */ - compatible = "marvell,mv64360-wdt"; - reg = <0xb410 0x8>; - }; - - i2c@c000 { - device_type = "i2c"; - compatible = "marvell,mv64360-i2c"; - reg = <0xc000 0x20>; - virtual-reg = <0xf100c000>; - interrupts = <37>; - interrupt-parent = <&PIC>; - }; - - PIC: pic { - #interrupt-cells = <1>; - #address-cells = <0>; - compatible = "marvell,mv64360-pic"; - reg = <0x0 0x88>; - interrupt-controller; - }; - - mpp@f000 { - compatible = "marvell,mv64360-mpp"; - reg = <0xf000 0x10>; - }; - - gpp@f100 { - compatible = "marvell,mv64360-gpp"; - reg = <0xf100 0x20>; - }; - - pci@80000000 { - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - compatible = "marvell,mv64360-pci"; - reg = <0xcf8 0x8>; - ranges = <0x01000000 0x0 0x0 - 0x88000000 0x0 0x01000000 - 0x02000000 0x0 0x80000000 - 0x80000000 0x0 0x08000000>; - bus-range = <0 255>; - clock-frequency = <66000000>; - interrupt-pci-iack = <0xc34>; - interrupt-parent = <&PIC>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0a */ - 0x5000 0 0 1 &PIC 80 - 0x5000 0 0 2 &PIC 81 - 0x5000 0 0 3 &PIC 91 - 0x5000 0 0 4 &PIC 93 - - /* IDSEL 0x0b */ - 0x5800 0 0 1 &PIC 91 - 0x5800 0 0 2 &PIC 93 - 0x5800 0 0 3 &PIC 80 - 0x5800 0 0 4 &PIC 81 - - /* IDSEL 0x0c */ - 0x6000 0 0 1 &PIC 91 - 0x6000 0 0 2 &PIC 93 - 0x6000 0 0 3 &PIC 80 - 0x6000 0 0 4 &PIC 81 - - /* IDSEL 0x0d */ - 0x6800 0 0 1 &PIC 93 - 0x6800 0 0 2 &PIC 80 - 0x6800 0 0 3 &PIC 81 - 0x6800 0 0 4 &PIC 91 - >; - }; - - cpu-error@0070 { - compatible = "marvell,mv64360-cpu-error"; - reg = <0x70 0x10 0x128 0x28>; - interrupts = <3>; - interrupt-parent = <&PIC>; - }; - - sram-ctrl@0380 { - compatible = "marvell,mv64360-sram-ctrl"; - reg = <0x380 0x80>; - interrupts = <13>; - interrupt-parent = <&PIC>; - }; - - pci-error@1d40 { - compatible = "marvell,mv64360-pci-error"; - reg = <0x1d40 0x40 0xc28 0x4>; - interrupts = <12>; - interrupt-parent = <&PIC>; - }; - - mem-ctrl@1400 { - compatible = "marvell,mv64360-mem-ctrl"; - reg = <0x1400 0x60>; - interrupts = <17>; - interrupt-parent = <&PIC>; - }; - }; - - chosen { - bootargs = "ip=on"; - linux,stdout-path = &MPSC0; - }; -}; diff --git a/arch/powerpc/boot/page.h b/arch/powerpc/boot/page.h index 14eca30fef64..87c42d7d283d 100644 --- a/arch/powerpc/boot/page.h +++ b/arch/powerpc/boot/page.h @@ -22,8 +22,8 @@ #define PAGE_MASK (~(PAGE_SIZE-1)) /* align addr on a size boundary - adjust address up/down if needed */ -#define _ALIGN_UP(addr,size) (((addr)+((size)-1))&(~((size)-1))) -#define _ALIGN_DOWN(addr,size) ((addr)&(~((size)-1))) +#define _ALIGN_UP(addr, size) (((addr)+((size)-1))&(~((typeof(addr))(size)-1))) +#define _ALIGN_DOWN(addr, size) ((addr)&(~((typeof(addr))(size)-1))) /* align addr on a size boundary - adjust address up if needed */ #define _ALIGN(addr,size) _ALIGN_UP(addr,size) diff --git a/arch/powerpc/boot/prpmc2800.c b/arch/powerpc/boot/prpmc2800.c deleted file mode 100644 index da31d6030482..000000000000 --- a/arch/powerpc/boot/prpmc2800.c +++ /dev/null @@ -1,571 +0,0 @@ -/* - * Motorola ECC prpmc280/f101 & prpmc2800/f101e platform code. - * - * Author: Mark A. Greer <mgreer@mvista.com> - * - * 2007 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <stdarg.h> -#include <stddef.h> -#include "types.h" -#include "elf.h" -#include "page.h" -#include "string.h" -#include "stdio.h" -#include "io.h" -#include "ops.h" -#include "gunzip_util.h" -#include "mv64x60.h" - -#define KB 1024U -#define MB (KB*KB) -#define GB (KB*MB) -#define MHz (1000U*1000U) -#define GHz (1000U*MHz) - -#define BOARD_MODEL "PrPMC2800" -#define BOARD_MODEL_MAX 32 /* max strlen(BOARD_MODEL) + 1 */ - -#define EEPROM2_ADDR 0xa4 -#define EEPROM3_ADDR 0xa8 - -BSS_STACK(16*KB); - -static u8 *bridge_base; - -typedef enum { - BOARD_MODEL_PRPMC280, - BOARD_MODEL_PRPMC2800, -} prpmc2800_board_model; - -typedef enum { - BRIDGE_TYPE_MV64360, - BRIDGE_TYPE_MV64362, -} prpmc2800_bridge_type; - -struct prpmc2800_board_info { - prpmc2800_board_model model; - char variant; - prpmc2800_bridge_type bridge_type; - u8 subsys0; - u8 subsys1; - u8 vpd4; - u8 vpd4_mask; - u32 core_speed; - u32 mem_size; - u32 boot_flash; - u32 user_flash; -}; - -static struct prpmc2800_board_info prpmc2800_board_info[] = { - { - .model = BOARD_MODEL_PRPMC280, - .variant = 'a', - .bridge_type = BRIDGE_TYPE_MV64360, - .subsys0 = 0xff, - .subsys1 = 0xff, - .vpd4 = 0x00, - .vpd4_mask = 0x0f, - .core_speed = 1*GHz, - .mem_size = 512*MB, - .boot_flash = 1*MB, - .user_flash = 64*MB, - }, - { - .model = BOARD_MODEL_PRPMC280, - .variant = 'b', - .bridge_type = BRIDGE_TYPE_MV64362, - .subsys0 = 0xff, - .subsys1 = 0xff, - .vpd4 = 0x01, - .vpd4_mask = 0x0f, - .core_speed = 1*GHz, - .mem_size = 512*MB, - .boot_flash = 0, - .user_flash = 0, - }, - { - .model = BOARD_MODEL_PRPMC280, - .variant = 'c', - .bridge_type = BRIDGE_TYPE_MV64360, - .subsys0 = 0xff, - .subsys1 = 0xff, - .vpd4 = 0x02, - .vpd4_mask = 0x0f, - .core_speed = 733*MHz, - .mem_size = 512*MB, - .boot_flash = 1*MB, - .user_flash = 64*MB, - }, - { - .model = BOARD_MODEL_PRPMC280, - .variant = 'd', - .bridge_type = BRIDGE_TYPE_MV64360, - .subsys0 = 0xff, - .subsys1 = 0xff, - .vpd4 = 0x03, - .vpd4_mask = 0x0f, - .core_speed = 1*GHz, - .mem_size = 1*GB, - .boot_flash = 1*MB, - .user_flash = 64*MB, - }, - { - .model = BOARD_MODEL_PRPMC280, - .variant = 'e', - .bridge_type = BRIDGE_TYPE_MV64360, - .subsys0 = 0xff, - .subsys1 = 0xff, - .vpd4 = 0x04, - .vpd4_mask = 0x0f, - .core_speed = 1*GHz, - .mem_size = 512*MB, - .boot_flash = 1*MB, - .user_flash = 64*MB, - }, - { - .model = BOARD_MODEL_PRPMC280, - .variant = 'f', - .bridge_type = BRIDGE_TYPE_MV64362, - .subsys0 = 0xff, - .subsys1 = 0xff, - .vpd4 = 0x05, - .vpd4_mask = 0x0f, - .core_speed = 733*MHz, - .mem_size = 128*MB, - .boot_flash = 1*MB, - .user_flash = 0, - }, - { - .model = BOARD_MODEL_PRPMC280, - .variant = 'g', - .bridge_type = BRIDGE_TYPE_MV64360, - .subsys0 = 0xff, - .subsys1 = 0xff, - .vpd4 = 0x06, - .vpd4_mask = 0x0f, - .core_speed = 1*GHz, - .mem_size = 256*MB, - .boot_flash = 1*MB, - .user_flash = 0, - }, - { - .model = BOARD_MODEL_PRPMC280, - .variant = 'h', - .bridge_type = BRIDGE_TYPE_MV64360, - .subsys0 = 0xff, - .subsys1 = 0xff, - .vpd4 = 0x07, - .vpd4_mask = 0x0f, - .core_speed = 1*GHz, - .mem_size = 1*GB, - .boot_flash = 1*MB, - .user_flash = 64*MB, - }, - { - .model = BOARD_MODEL_PRPMC2800, - .variant = 'a', - .bridge_type = BRIDGE_TYPE_MV64360, - .subsys0 = 0xb2, - .subsys1 = 0x8c, - .vpd4 = 0x00, - .vpd4_mask = 0x00, - .core_speed = 1*GHz, - .mem_size = 512*MB, - .boot_flash = 2*MB, - .user_flash = 64*MB, - }, - { - .model = BOARD_MODEL_PRPMC2800, - .variant = 'b', - .bridge_type = BRIDGE_TYPE_MV64362, - .subsys0 = 0xb2, - .subsys1 = 0x8d, - .vpd4 = 0x00, - .vpd4_mask = 0x00, - .core_speed = 1*GHz, - .mem_size = 512*MB, - .boot_flash = 0, - .user_flash = 0, - }, - { - .model = BOARD_MODEL_PRPMC2800, - .variant = 'c', - .bridge_type = BRIDGE_TYPE_MV64360, - .subsys0 = 0xb2, - .subsys1 = 0x8e, - .vpd4 = 0x00, - .vpd4_mask = 0x00, - .core_speed = 733*MHz, - .mem_size = 512*MB, - .boot_flash = 2*MB, - .user_flash = 64*MB, - }, - { - .model = BOARD_MODEL_PRPMC2800, - .variant = 'd', - .bridge_type = BRIDGE_TYPE_MV64360, - .subsys0 = 0xb2, - .subsys1 = 0x8f, - .vpd4 = 0x00, - .vpd4_mask = 0x00, - .core_speed = 1*GHz, - .mem_size = 1*GB, - .boot_flash = 2*MB, - .user_flash = 64*MB, - }, - { - .model = BOARD_MODEL_PRPMC2800, - .variant = 'e', - .bridge_type = BRIDGE_TYPE_MV64360, - .subsys0 = 0xa2, - .subsys1 = 0x8a, - .vpd4 = 0x00, - .vpd4_mask = 0x00, - .core_speed = 1*GHz, - .mem_size = 512*MB, - .boot_flash = 2*MB, - .user_flash = 64*MB, - }, - { - .model = BOARD_MODEL_PRPMC2800, - .variant = 'f', - .bridge_type = BRIDGE_TYPE_MV64362, - .subsys0 = 0xa2, - .subsys1 = 0x8b, - .vpd4 = 0x00, - .vpd4_mask = 0x00, - .core_speed = 733*MHz, - .mem_size = 128*MB, - .boot_flash = 2*MB, - .user_flash = 0, - }, - { - .model = BOARD_MODEL_PRPMC2800, - .variant = 'g', - .bridge_type = BRIDGE_TYPE_MV64360, - .subsys0 = 0xa2, - .subsys1 = 0x8c, - .vpd4 = 0x00, - .vpd4_mask = 0x00, - .core_speed = 1*GHz, - .mem_size = 2*GB, - .boot_flash = 2*MB, - .user_flash = 64*MB, - }, - { - .model = BOARD_MODEL_PRPMC2800, - .variant = 'h', - .bridge_type = BRIDGE_TYPE_MV64360, - .subsys0 = 0xa2, - .subsys1 = 0x8d, - .vpd4 = 0x00, - .vpd4_mask = 0x00, - .core_speed = 733*MHz, - .mem_size = 1*GB, - .boot_flash = 2*MB, - .user_flash = 64*MB, - }, -}; - -static struct prpmc2800_board_info *prpmc2800_get_board_info(u8 *vpd) -{ - struct prpmc2800_board_info *bip; - int i; - - for (i=0,bip=prpmc2800_board_info; i<ARRAY_SIZE(prpmc2800_board_info); - i++,bip++) - if ((vpd[0] == bip->subsys0) && (vpd[1] == bip->subsys1) - && ((vpd[4] & bip->vpd4_mask) == bip->vpd4)) - return bip; - - return NULL; -} - -/* Get VPD from i2c eeprom 2, then match it to a board info entry */ -static struct prpmc2800_board_info *prpmc2800_get_bip(void) -{ - struct prpmc2800_board_info *bip; - u8 vpd[5]; - int rc; - - if (mv64x60_i2c_open()) - fatal("Error: Can't open i2c device\n\r"); - - /* Get VPD from i2c eeprom-2 */ - memset(vpd, 0, sizeof(vpd)); - rc = mv64x60_i2c_read(EEPROM2_ADDR, vpd, 0x1fde, 2, sizeof(vpd)); - if (rc < 0) - fatal("Error: Couldn't read eeprom2\n\r"); - mv64x60_i2c_close(); - - /* Get board type & related info */ - bip = prpmc2800_get_board_info(vpd); - if (bip == NULL) { - printf("Error: Unsupported board or corrupted VPD:\n\r"); - printf(" 0x%x 0x%x 0x%x 0x%x 0x%x\n\r", - vpd[0], vpd[1], vpd[2], vpd[3], vpd[4]); - printf("Using device tree defaults...\n\r"); - } - - return bip; -} - -static void prpmc2800_bridge_setup(u32 mem_size) -{ - u32 i, v[12], enables, acc_bits; - u32 pci_base_hi, pci_base_lo, size, buf[2]; - unsigned long cpu_base; - int rc; - void *devp; - u8 *bridge_pbase, is_coherent; - struct mv64x60_cpu2pci_win *tbl; - - bridge_pbase = mv64x60_get_bridge_pbase(); - is_coherent = mv64x60_is_coherent(); - - if (is_coherent) - acc_bits = MV64x60_PCI_ACC_CNTL_SNOOP_WB - | MV64x60_PCI_ACC_CNTL_SWAP_NONE - | MV64x60_PCI_ACC_CNTL_MBURST_32_BYTES - | MV64x60_PCI_ACC_CNTL_RDSIZE_32_BYTES; - else - acc_bits = MV64x60_PCI_ACC_CNTL_SNOOP_NONE - | MV64x60_PCI_ACC_CNTL_SWAP_NONE - | MV64x60_PCI_ACC_CNTL_MBURST_128_BYTES - | MV64x60_PCI_ACC_CNTL_RDSIZE_256_BYTES; - - mv64x60_config_ctlr_windows(bridge_base, bridge_pbase, is_coherent); - mv64x60_config_pci_windows(bridge_base, bridge_pbase, 0, 0, mem_size, - acc_bits); - - /* Get the cpu -> pci i/o & mem mappings from the device tree */ - devp = find_node_by_compatible(NULL, "marvell,mv64360-pci"); - if (devp == NULL) - fatal("Error: Missing marvell,mv64360-pci" - " device tree node\n\r"); - - rc = getprop(devp, "ranges", v, sizeof(v)); - if (rc != sizeof(v)) - fatal("Error: Can't find marvell,mv64360-pci ranges" - " property\n\r"); - - /* Get the cpu -> pci i/o & mem mappings from the device tree */ - devp = find_node_by_compatible(NULL, "marvell,mv64360"); - if (devp == NULL) - fatal("Error: Missing marvell,mv64360 device tree node\n\r"); - - enables = in_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE)); - enables |= 0x0007fe00; /* Disable all cpu->pci windows */ - out_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE), enables); - - for (i=0; i<12; i+=6) { - switch (v[i] & 0xff000000) { - case 0x01000000: /* PCI I/O Space */ - tbl = mv64x60_cpu2pci_io; - break; - case 0x02000000: /* PCI MEM Space */ - tbl = mv64x60_cpu2pci_mem; - break; - default: - continue; - } - - pci_base_hi = v[i+1]; - pci_base_lo = v[i+2]; - cpu_base = v[i+3]; - size = v[i+5]; - - buf[0] = cpu_base; - buf[1] = size; - - if (!dt_xlate_addr(devp, buf, sizeof(buf), &cpu_base)) - fatal("Error: Can't translate PCI address 0x%x\n\r", - (u32)cpu_base); - - mv64x60_config_cpu2pci_window(bridge_base, 0, pci_base_hi, - pci_base_lo, cpu_base, size, tbl); - } - - enables &= ~0x00000600; /* Enable cpu->pci0 i/o, cpu->pci0 mem0 */ - out_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE), enables); -} - -static void prpmc2800_fixups(void) -{ - u32 v[2], l, mem_size; - int rc; - void *devp; - char model[BOARD_MODEL_MAX]; - struct prpmc2800_board_info *bip; - - bip = prpmc2800_get_bip(); /* Get board info based on VPD */ - - mem_size = (bip) ? bip->mem_size : mv64x60_get_mem_size(bridge_base); - prpmc2800_bridge_setup(mem_size); /* Do necessary bridge setup */ - - /* If the VPD doesn't match what we know about, just use the - * defaults already in the device tree. - */ - if (!bip) - return; - - /* Know the board type so override device tree defaults */ - /* Set /model appropriately */ - devp = finddevice("/"); - if (devp == NULL) - fatal("Error: Missing '/' device tree node\n\r"); - memset(model, 0, BOARD_MODEL_MAX); - strncpy(model, BOARD_MODEL, BOARD_MODEL_MAX - 2); - l = strlen(model); - if (bip->model == BOARD_MODEL_PRPMC280) - l--; - model[l++] = bip->variant; - model[l++] = '\0'; - setprop(devp, "model", model, l); - - /* Set /cpus/PowerPC,7447/clock-frequency */ - devp = find_node_by_prop_value_str(NULL, "device_type", "cpu"); - if (devp == NULL) - fatal("Error: Missing proper cpu device tree node\n\r"); - v[0] = bip->core_speed; - setprop(devp, "clock-frequency", &v[0], sizeof(v[0])); - - /* Set /memory/reg size */ - devp = finddevice("/memory"); - if (devp == NULL) - fatal("Error: Missing /memory device tree node\n\r"); - v[0] = 0; - v[1] = bip->mem_size; - setprop(devp, "reg", v, sizeof(v)); - - /* Update model, if this is a mv64362 */ - if (bip->bridge_type == BRIDGE_TYPE_MV64362) { - devp = find_node_by_compatible(NULL, "marvell,mv64360"); - if (devp == NULL) - fatal("Error: Missing marvell,mv64360" - " device tree node\n\r"); - setprop(devp, "model", "mv64362", strlen("mv64362") + 1); - } - - /* Set User FLASH size */ - devp = find_node_by_compatible(NULL, "direct-mapped"); - if (devp == NULL) - fatal("Error: Missing User FLASH device tree node\n\r"); - rc = getprop(devp, "reg", v, sizeof(v)); - if (rc != sizeof(v)) - fatal("Error: Can't find User FLASH reg property\n\r"); - v[1] = bip->user_flash; - setprop(devp, "reg", v, sizeof(v)); -} - -#define MV64x60_MPP_CNTL_0 0xf000 -#define MV64x60_MPP_CNTL_2 0xf008 -#define MV64x60_GPP_IO_CNTL 0xf100 -#define MV64x60_GPP_LEVEL_CNTL 0xf110 -#define MV64x60_GPP_VALUE_SET 0xf118 - -static void prpmc2800_reset(void) -{ - u32 temp; - - udelay(5000000); - - if (bridge_base != 0) { - temp = in_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_0)); - temp &= 0xFFFF0FFF; - out_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_0), temp); - - temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL)); - temp |= 0x00000004; - out_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL), temp); - - temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL)); - temp |= 0x00000004; - out_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL), temp); - - temp = in_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_2)); - temp &= 0xFFFF0FFF; - out_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_2), temp); - - temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL)); - temp |= 0x00080000; - out_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL), temp); - - temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL)); - temp |= 0x00080000; - out_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL), temp); - - out_le32((u32 *)(bridge_base + MV64x60_GPP_VALUE_SET), - 0x00080004); - } - - for (;;); -} - -#define HEAP_SIZE (16*MB) -static struct gunzip_state gzstate; - -void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - struct elf_info ei; - char *heap_start, *dtb; - int dt_size = _dtb_end - _dtb_start; - void *vmlinuz_addr = _vmlinux_start; - unsigned long vmlinuz_size = _vmlinux_end - _vmlinux_start; - char elfheader[256]; - - if (dt_size <= 0) /* No fdt */ - exit(); - - /* - * Start heap after end of the kernel (after decompressed to - * address 0) or the end of the zImage, whichever is higher. - * That's so things allocated by simple_alloc won't overwrite - * any part of the zImage and the kernel won't overwrite the dtb - * when decompressed & relocated. - */ - gunzip_start(&gzstate, vmlinuz_addr, vmlinuz_size); - gunzip_exactly(&gzstate, elfheader, sizeof(elfheader)); - - if (!parse_elf32(elfheader, &ei)) - exit(); - - heap_start = (char *)(ei.memsize + ei.elfoffset); /* end of kernel*/ - heap_start = max(heap_start, (char *)_end); /* end of zImage */ - - if ((unsigned)simple_alloc_init(heap_start, HEAP_SIZE, 2*KB, 16) - > (128*MB)) - exit(); - - /* Relocate dtb to safe area past end of zImage & kernel */ - dtb = malloc(dt_size); - if (!dtb) - exit(); - memmove(dtb, _dtb_start, dt_size); - fdt_init(dtb); - - bridge_base = mv64x60_get_bridge_base(); - - platform_ops.fixups = prpmc2800_fixups; - platform_ops.exit = prpmc2800_reset; - - if (serial_console_init() < 0) - exit(); -} - -/* _zimage_start called very early--need to turn off external interrupts */ -asm (" .globl _zimage_start\n\ - _zimage_start:\n\ - mfmsr 10\n\ - rlwinm 10,10,0,~(1<<15) /* Clear MSR_EE */\n\ - sync\n\ - mtmsr 10\n\ - isync\n\ - b _zimage_start_lib\n\ -"); diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index 3f50c27ed8f8..ceaa75d5a684 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -63,6 +63,23 @@ usage() { exit 1 } +run_cmd() { + if [ "$V" = 1 ]; then + $* 2>&1 + else + local msg + + set +e + msg=$($* 2>&1) + + if [ $? -ne "0" ]; then + echo $msg + exit 1 + fi + set -e + fi +} + while [ "$#" -gt 0 ]; do case "$1" in -o) @@ -456,12 +473,12 @@ ps3) ${CROSS}objcopy -O binary "$ofile" "$ofile.bin" - dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \ - skip=$overlay_dest seek=$system_reset_kernel \ + run_cmd dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \ + skip=$overlay_dest seek=$system_reset_kernel \ count=$overlay_size bs=1 - dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \ - skip=$system_reset_overlay seek=$overlay_dest \ + run_cmd dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \ + skip=$system_reset_overlay seek=$overlay_dest \ count=$overlay_size bs=1 odir="$(dirname "$ofile.bin")" diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig index 9227b517560a..db328e618bb9 100644 --- a/arch/powerpc/configs/cell_defconfig +++ b/arch/powerpc/configs/cell_defconfig @@ -1,5 +1,5 @@ CONFIG_PPC64=y -CONFIG_TUNE_CELL=y +CONFIG_CELL_CPU=y CONFIG_ALTIVEC=y CONFIG_SMP=y CONFIG_NR_CPUS=4 diff --git a/arch/powerpc/configs/mpc512x_defconfig b/arch/powerpc/configs/mpc512x_defconfig index 59b85cb95259..d16d6c5cb282 100644 --- a/arch/powerpc/configs/mpc512x_defconfig +++ b/arch/powerpc/configs/mpc512x_defconfig @@ -112,6 +112,7 @@ CONFIG_RTC_DRV_M41T80=y CONFIG_RTC_DRV_MPC5121=y CONFIG_DMADEVICES=y CONFIG_MPC512X_DMA=y +CONFIG_MPC512x_LPBFIFO=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XIP=y CONFIG_EXT3_FS=y diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig index adc14e813a49..c40046074f8b 100644 --- a/arch/powerpc/configs/ps3_defconfig +++ b/arch/powerpc/configs/ps3_defconfig @@ -1,5 +1,5 @@ CONFIG_PPC64=y -CONFIG_TUNE_CELL=y +CONFIG_CELL_CPU=y CONFIG_ALTIVEC=y CONFIG_SMP=y CONFIG_NR_CPUS=2 @@ -53,7 +53,6 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set -CONFIG_IPV6=y CONFIG_BT=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y @@ -141,8 +140,6 @@ CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_PS3=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_EXT2_FS=m -CONFIG_EXT3_FS=m -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT4_FS=y CONFIG_QUOTA=y CONFIG_QFMT_V2=y @@ -175,9 +172,7 @@ CONFIG_DEBUG_LOCKDEP=y CONFIG_DEBUG_LIST=y CONFIG_RCU_CPU_STALL_TIMEOUT=60 # CONFIG_FTRACE is not set -CONFIG_CRYPTO_GCM=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_LZO=m -# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/powerpc/include/asm/exception-64e.h b/arch/powerpc/include/asm/exception-64e.h index a8b52b61043f..a703452d67b6 100644 --- a/arch/powerpc/include/asm/exception-64e.h +++ b/arch/powerpc/include/asm/exception-64e.h @@ -69,13 +69,14 @@ #define EX_TLB_ESR ( 9 * 8) /* Level 0 and 2 only */ #define EX_TLB_SRR0 (10 * 8) #define EX_TLB_SRR1 (11 * 8) +#define EX_TLB_R7 (12 * 8) #ifdef CONFIG_BOOK3E_MMU_TLB_STATS -#define EX_TLB_R8 (12 * 8) -#define EX_TLB_R9 (13 * 8) -#define EX_TLB_LR (14 * 8) -#define EX_TLB_SIZE (15 * 8) +#define EX_TLB_R8 (13 * 8) +#define EX_TLB_R9 (14 * 8) +#define EX_TLB_LR (15 * 8) +#define EX_TLB_SIZE (16 * 8) #else -#define EX_TLB_SIZE (12 * 8) +#define EX_TLB_SIZE (13 * 8) #endif #define START_EXCEPTION(label) \ @@ -204,8 +205,8 @@ exc_##label##_book3e: #endif #define SET_IVOR(vector_number, vector_offset) \ - li r3,vector_offset@l; \ - ori r3,r3,interrupt_base_book3e@l; \ + LOAD_REG_ADDR(r3,interrupt_base_book3e);\ + ori r3,r3,vector_offset@l; \ mtspr SPRN_IVOR##vector_number,r3; #endif /* _ASM_POWERPC_EXCEPTION_64E_H */ diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h index a82f5347540a..ba3342bbdbda 100644 --- a/arch/powerpc/include/asm/mmu-hash64.h +++ b/arch/powerpc/include/asm/mmu-hash64.h @@ -14,6 +14,7 @@ #include <asm/asm-compat.h> #include <asm/page.h> +#include <asm/bug.h> /* * This is necessary to get the definition of PGTABLE_RANGE which we diff --git a/arch/powerpc/include/asm/mpc5121.h b/arch/powerpc/include/asm/mpc5121.h index 4a69cd1d5041..deaeb0b1f171 100644 --- a/arch/powerpc/include/asm/mpc5121.h +++ b/arch/powerpc/include/asm/mpc5121.h @@ -60,4 +60,63 @@ struct mpc512x_lpc { int mpc512x_cs_config(unsigned int cs, u32 val); +/* + * SCLPC Module (LPB FIFO) + */ +struct mpc512x_lpbfifo { + u32 pkt_size; /* SCLPC Packet Size Register */ + u32 start_addr; /* SCLPC Start Address Register */ + u32 ctrl; /* SCLPC Control Register */ + u32 enable; /* SCLPC Enable Register */ + u32 reserved1; + u32 status; /* SCLPC Status Register */ + u32 bytes_done; /* SCLPC Bytes Done Register */ + u32 emb_sc; /* EMB Share Counter Register */ + u32 emb_pc; /* EMB Pause Control Register */ + u32 reserved2[7]; + u32 data_word; /* LPC RX/TX FIFO Data Word Register */ + u32 fifo_status; /* LPC RX/TX FIFO Status Register */ + u32 fifo_ctrl; /* LPC RX/TX FIFO Control Register */ + u32 fifo_alarm; /* LPC RX/TX FIFO Alarm Register */ +}; + +#define MPC512X_SCLPC_START (1 << 31) +#define MPC512X_SCLPC_CS(x) (((x) & 0x7) << 24) +#define MPC512X_SCLPC_FLUSH (1 << 17) +#define MPC512X_SCLPC_READ (1 << 16) +#define MPC512X_SCLPC_DAI (1 << 8) +#define MPC512X_SCLPC_BPT(x) ((x) & 0x3f) +#define MPC512X_SCLPC_RESET (1 << 24) +#define MPC512X_SCLPC_FIFO_RESET (1 << 16) +#define MPC512X_SCLPC_ABORT_INT_ENABLE (1 << 9) +#define MPC512X_SCLPC_NORM_INT_ENABLE (1 << 8) +#define MPC512X_SCLPC_ENABLE (1 << 0) +#define MPC512X_SCLPC_SUCCESS (1 << 24) +#define MPC512X_SCLPC_FIFO_CTRL(x) (((x) & 0x7) << 24) +#define MPC512X_SCLPC_FIFO_ALARM(x) ((x) & 0x3ff) + +enum lpb_dev_portsize { + LPB_DEV_PORTSIZE_UNDEFINED = 0, + LPB_DEV_PORTSIZE_1_BYTE = 1, + LPB_DEV_PORTSIZE_2_BYTES = 2, + LPB_DEV_PORTSIZE_4_BYTES = 4, + LPB_DEV_PORTSIZE_8_BYTES = 8 +}; + +enum mpc512x_lpbfifo_req_dir { + MPC512X_LPBFIFO_REQ_DIR_READ, + MPC512X_LPBFIFO_REQ_DIR_WRITE +}; + +struct mpc512x_lpbfifo_request { + phys_addr_t dev_phys_addr; /* physical address of some device on LPB */ + void *ram_virt_addr; /* virtual address of some region in RAM */ + u32 size; + enum lpb_dev_portsize portsize; + enum mpc512x_lpbfifo_req_dir dir; + void (*callback)(struct mpc512x_lpbfifo_request *); +}; + +int mpc512x_lpbfifo_submit(struct mpc512x_lpbfifo_request *req); + #endif /* __ASM_POWERPC_MPC5121_H__ */ diff --git a/arch/powerpc/include/asm/mpc52xx_psc.h b/arch/powerpc/include/asm/mpc52xx_psc.h index 04c7e8fc24c2..ec995b289280 100644 --- a/arch/powerpc/include/asm/mpc52xx_psc.h +++ b/arch/powerpc/include/asm/mpc52xx_psc.h @@ -261,8 +261,6 @@ struct mpc52xx_psc_fifo { #define MPC512x_PSC_FIFO_FULL 0x2 #define MPC512x_PSC_FIFO_ALARM 0x4 #define MPC512x_PSC_FIFO_URERR 0x8 -#define MPC512x_PSC_FIFO_ORERR 0x01 -#define MPC512x_PSC_FIFO_MEMERROR 0x02 struct mpc512x_psc_fifo { u32 reserved1[10]; diff --git a/arch/powerpc/include/asm/msi_bitmap.h b/arch/powerpc/include/asm/msi_bitmap.h index 97ac3f46ae0d..1ec7125551f1 100644 --- a/arch/powerpc/include/asm/msi_bitmap.h +++ b/arch/powerpc/include/asm/msi_bitmap.h @@ -19,6 +19,7 @@ struct msi_bitmap { unsigned long *bitmap; spinlock_t lock; unsigned int irq_count; + bool bitmap_from_slab; }; int msi_bitmap_alloc_hwirqs(struct msi_bitmap *bmp, int num); diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h index 71294a6e976e..3140c19c448c 100644 --- a/arch/powerpc/include/asm/page.h +++ b/arch/powerpc/include/asm/page.h @@ -12,6 +12,7 @@ #ifndef __ASSEMBLY__ #include <linux/types.h> +#include <linux/kernel.h> #else #include <asm/types.h> #endif @@ -107,12 +108,13 @@ extern long long virt_phys_offset; #endif /* See Description below for VIRT_PHYS_OFFSET */ -#ifdef CONFIG_RELOCATABLE_PPC32 +#if defined(CONFIG_PPC32) && defined(CONFIG_BOOKE) +#ifdef CONFIG_RELOCATABLE #define VIRT_PHYS_OFFSET virt_phys_offset #else #define VIRT_PHYS_OFFSET (KERNELBASE - PHYSICAL_START) #endif - +#endif #ifdef CONFIG_PPC64 #define MEMORY_START 0UL @@ -127,9 +129,10 @@ extern long long virt_phys_offset; #define pfn_valid(pfn) ((pfn) >= ARCH_PFN_OFFSET && (pfn) < max_mapnr) #endif -#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) +#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT) +#define virt_to_page(kaddr) pfn_to_page(virt_to_pfn(kaddr)) #define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) -#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) +#define virt_addr_valid(kaddr) pfn_valid(virt_to_pfn(kaddr)) /* * On Book-E parts we need __va to parse the device tree and we can't @@ -204,7 +207,7 @@ extern long long virt_phys_offset; * On non-Book-E PPC64 PAGE_OFFSET and MEMORY_START are constants so use * the other definitions for __va & __pa. */ -#ifdef CONFIG_BOOKE +#if defined(CONFIG_PPC32) && defined(CONFIG_BOOKE) #define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) + VIRT_PHYS_OFFSET)) #define __pa(x) ((unsigned long)(x) - VIRT_PHYS_OFFSET) #else @@ -240,8 +243,8 @@ extern long long virt_phys_offset; #endif /* align addr on a size boundary - adjust address up/down if needed */ -#define _ALIGN_UP(addr,size) (((addr)+((size)-1))&(~((size)-1))) -#define _ALIGN_DOWN(addr,size) ((addr)&(~((size)-1))) +#define _ALIGN_UP(addr, size) __ALIGN_KERNEL(addr, size) +#define _ALIGN_DOWN(addr, size) ((addr)&(~((typeof(addr))(size)-1))) /* align addr on a size boundary - adjust address up if needed */ #define _ALIGN(addr,size) _ALIGN_UP(addr,size) @@ -362,6 +365,20 @@ typedef struct { signed long pd; } hugepd_t; #ifdef CONFIG_HUGETLB_PAGE #ifdef CONFIG_PPC_BOOK3S_64 +#ifdef CONFIG_PPC_64K_PAGES +/* + * With 64k page size, we have hugepage ptes in the pgd and pmd entries. We don't + * need to setup hugepage directory for them. Our pte and page directory format + * enable us to have this enabled. But to avoid errors when implementing new + * features disable hugepd for 64K. We enable a debug version here, So we catch + * wrong usage. + */ +#ifdef CONFIG_DEBUG_VM +extern int hugepd_ok(hugepd_t hpd); +#else +#define hugepd_ok(x) (0) +#endif +#else static inline int hugepd_ok(hugepd_t hpd) { /* @@ -370,6 +387,7 @@ static inline int hugepd_ok(hugepd_t hpd) */ return (((hpd.pd & 0x3) == 0x0) && ((hpd.pd & HUGEPD_SHIFT_MASK) != 0)); } +#endif #else static inline int hugepd_ok(hugepd_t hpd) { diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h index fa1dfb7f7b48..3245f2d96d4f 100644 --- a/arch/powerpc/include/asm/pgtable-ppc64.h +++ b/arch/powerpc/include/asm/pgtable-ppc64.h @@ -437,9 +437,9 @@ static inline char *get_hpte_slot_array(pmd_t *pmdp) } +#ifdef CONFIG_TRANSPARENT_HUGEPAGE extern void hpte_do_hugepage_flush(struct mm_struct *mm, unsigned long addr, pmd_t *pmdp, unsigned long old_pmd); -#ifdef CONFIG_TRANSPARENT_HUGEPAGE extern pmd_t pfn_pmd(unsigned long pfn, pgprot_t pgprot); extern pmd_t mk_pmd(struct page *page, pgprot_t pgprot); extern pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot); @@ -479,6 +479,14 @@ static inline int pmd_trans_splitting(pmd_t pmd) } extern int has_transparent_hugepage(void); +#else +static inline void hpte_do_hugepage_flush(struct mm_struct *mm, + unsigned long addr, pmd_t *pmdp, + unsigned long old_pmd) +{ + + WARN(1, "%s called with THP disabled\n", __func__); +} #endif /* CONFIG_TRANSPARENT_HUGEPAGE */ static inline int pmd_large(pmd_t pmd) diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h index 0717693c8428..b64b4212b71f 100644 --- a/arch/powerpc/include/asm/pgtable.h +++ b/arch/powerpc/include/asm/pgtable.h @@ -259,15 +259,15 @@ extern int gup_hugepte(pte_t *ptep, unsigned long sz, unsigned long addr, #define has_transparent_hugepage() 0 #endif pte_t *__find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea, - unsigned *shift); + bool *is_thp, unsigned *shift); static inline pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea, - unsigned *shift) + bool *is_thp, unsigned *shift) { if (!arch_irqs_disabled()) { pr_info("%s called with irq enabled\n", __func__); dump_stack(); } - return __find_linux_pte_or_hugepte(pgdir, ea, shift); + return __find_linux_pte_or_hugepte(pgdir, ea, is_thp, shift); } #endif /* __ASSEMBLY__ */ diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h index 126d0c4f9b7d..c9e26cb264f4 100644 --- a/arch/powerpc/include/asm/systbl.h +++ b/arch/powerpc/include/asm/systbl.h @@ -370,3 +370,15 @@ COMPAT_SYS(execveat) PPC64ONLY(switch_endian) SYSCALL_SPU(userfaultfd) SYSCALL_SPU(membarrier) +SYSCALL(semop) +SYSCALL(semget) +COMPAT_SYS(semctl) +COMPAT_SYS(semtimedop) +COMPAT_SYS(msgsnd) +COMPAT_SYS(msgrcv) +SYSCALL(msgget) +COMPAT_SYS(msgctl) +COMPAT_SYS(shmat) +SYSCALL(shmdt) +SYSCALL(shmget) +COMPAT_SYS(shmctl) diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h index 13411be86041..6d8f8023ac27 100644 --- a/arch/powerpc/include/asm/unistd.h +++ b/arch/powerpc/include/asm/unistd.h @@ -12,7 +12,7 @@ #include <uapi/asm/unistd.h> -#define __NR_syscalls 366 +#define __NR_syscalls 378 #define __NR__exit __NR_exit #define NR_syscalls __NR_syscalls diff --git a/arch/powerpc/include/uapi/asm/unistd.h b/arch/powerpc/include/uapi/asm/unistd.h index 6337738018aa..81579e93c659 100644 --- a/arch/powerpc/include/uapi/asm/unistd.h +++ b/arch/powerpc/include/uapi/asm/unistd.h @@ -388,5 +388,17 @@ #define __NR_switch_endian 363 #define __NR_userfaultfd 364 #define __NR_membarrier 365 +#define __NR_semop 366 +#define __NR_semget 367 +#define __NR_semctl 368 +#define __NR_semtimedop 369 +#define __NR_msgsnd 370 +#define __NR_msgrcv 371 +#define __NR_msgget 372 +#define __NR_msgctl 373 +#define __NR_shmat 374 +#define __NR_shmdt 375 +#define __NR_shmget 376 +#define __NR_shmctl 377 #endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */ diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c index 51dbace3269b..2bb252c01f07 100644 --- a/arch/powerpc/kernel/crash.c +++ b/arch/powerpc/kernel/crash.c @@ -221,8 +221,8 @@ void crash_kexec_secondary(struct pt_regs *regs) #endif /* CONFIG_SMP */ /* wait for all the CPUs to hit real mode but timeout if they don't come in */ -#if defined(CONFIG_SMP) && defined(CONFIG_PPC_STD_MMU_64) -static void crash_kexec_wait_realmode(int cpu) +#if defined(CONFIG_SMP) && defined(CONFIG_PPC64) +static void __maybe_unused crash_kexec_wait_realmode(int cpu) { unsigned int msecs; int i; @@ -244,7 +244,7 @@ static void crash_kexec_wait_realmode(int cpu) } #else static inline void crash_kexec_wait_realmode(int cpu) {} -#endif /* CONFIG_SMP && CONFIG_PPC_STD_MMU_64 */ +#endif /* CONFIG_SMP && CONFIG_PPC64 */ /* * Register a function to be called on shutdown. Only use this if you diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c index e968533e3e05..40e4d4a27663 100644 --- a/arch/powerpc/kernel/eeh.c +++ b/arch/powerpc/kernel/eeh.c @@ -351,7 +351,8 @@ static inline unsigned long eeh_token_to_phys(unsigned long token) * worried about _PAGE_SPLITTING/collapse. Also we will not hit * page table free, because of init_mm. */ - ptep = __find_linux_pte_or_hugepte(init_mm.pgd, token, &hugepage_shift); + ptep = __find_linux_pte_or_hugepte(init_mm.pgd, token, + NULL, &hugepage_shift); if (!ptep) return token; WARN_ON(hugepage_shift); @@ -630,7 +631,7 @@ int eeh_pci_enable(struct eeh_pe *pe, int function) */ switch (function) { case EEH_OPT_THAW_MMIO: - active_flag = EEH_STATE_MMIO_ACTIVE; + active_flag = EEH_STATE_MMIO_ACTIVE | EEH_STATE_MMIO_ENABLED; break; case EEH_OPT_THAW_DMA: active_flag = EEH_STATE_DMA_ACTIVE; @@ -1411,8 +1412,7 @@ void eeh_dev_release(struct pci_dev *pdev) goto out; /* Decrease PE's pass through count */ - atomic_dec(&edev->pe->pass_dev_cnt); - WARN_ON(atomic_read(&edev->pe->pass_dev_cnt) < 0); + WARN_ON(atomic_dec_if_positive(&edev->pe->pass_dev_cnt) < 0); eeh_pe_change_owner(edev->pe); out: mutex_unlock(&eeh_dev_mutex); diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c index 89eb4bc34d3a..80dfe8965df9 100644 --- a/arch/powerpc/kernel/eeh_driver.c +++ b/arch/powerpc/kernel/eeh_driver.c @@ -416,7 +416,10 @@ static void *eeh_rmv_device(void *data, void *userdata) driver = eeh_pcid_get(dev); if (driver) { eeh_pcid_put(dev); - if (driver->err_handler) + if (driver->err_handler && + driver->err_handler->error_detected && + driver->err_handler->slot_reset && + driver->err_handler->resume) return NULL; } @@ -587,10 +590,16 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus) eeh_ops->configure_bridge(pe); eeh_pe_restore_bars(pe); - /* Clear frozen state */ - rc = eeh_clear_pe_frozen_state(pe, false); - if (rc) - return rc; + /* + * If it's PHB PE, the frozen state on all available PEs should have + * been cleared by the PHB reset. Otherwise, we unfreeze the PE and its + * child PEs because they might be in frozen state. + */ + if (!(pe->type & EEH_PE_PHB)) { + rc = eeh_clear_pe_frozen_state(pe, false); + if (rc) + return rc; + } /* Give the system 5 seconds to finish running the user-space * hotplug shutdown scripts, e.g. ifdown for ethernet. Yes, @@ -655,9 +664,17 @@ static void eeh_handle_normal_event(struct eeh_pe *pe) * to accomplish the reset. Each child gets a report of the * status ... if any child can't handle the reset, then the entire * slot is dlpar removed and added. + * + * When the PHB is fenced, we have to issue a reset to recover from + * the error. Override the result if necessary to have partially + * hotplug for this case. */ pr_info("EEH: Notify device drivers to shutdown\n"); eeh_pe_dev_traverse(pe, eeh_report_error, &result); + if ((pe->type & EEH_PE_PHB) && + result != PCI_ERS_RESULT_NONE && + result != PCI_ERS_RESULT_NEED_RESET) + result = PCI_ERS_RESULT_NEED_RESET; /* Get the current PCI slot state. This can take a long time, * sometimes over 300 seconds for certain systems. diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S index f3bd5e747ed8..488e6314f993 100644 --- a/arch/powerpc/kernel/exceptions-64e.S +++ b/arch/powerpc/kernel/exceptions-64e.S @@ -542,8 +542,8 @@ interrupt_base_book3e: /* fake trap */ EXCEPTION_STUB(0x320, ehpriv) EXCEPTION_STUB(0x340, lrat_error) - .globl interrupt_end_book3e -interrupt_end_book3e: + .globl __end_interrupts +__end_interrupts: /* Critical Input Interrupt */ START_EXCEPTION(critical_input); @@ -736,7 +736,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) beq+ 1f LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e) - LOAD_REG_IMMEDIATE(r15,interrupt_end_book3e) + LOAD_REG_IMMEDIATE(r15,__end_interrupts) cmpld cr0,r10,r14 cmpld cr1,r10,r15 blt+ cr0,1f @@ -800,7 +800,7 @@ kernel_dbg_exc: beq+ 1f LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e) - LOAD_REG_IMMEDIATE(r15,interrupt_end_book3e) + LOAD_REG_IMMEDIATE(r15,__end_interrupts) cmpld cr0,r10,r14 cmpld cr1,r10,r15 blt+ cr0,1f @@ -1351,7 +1351,10 @@ skpinv: addi r6,r6,1 /* Increment */ * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping */ /* Now we branch the new virtual address mapped by this entry */ - LOAD_REG_IMMEDIATE(r6,2f) + bl 1f /* Find our address */ +1: mflr r6 + addi r6,r6,(2f - 1b) + tovirt(r6,r6) lis r7,MSR_KERNEL@h ori r7,r7,MSR_KERNEL@l mtspr SPRN_SRR0,r6 @@ -1583,9 +1586,11 @@ _GLOBAL(book3e_secondary_thread_init) mflr r28 b 3b + .globl init_core_book3e init_core_book3e: /* Establish the interrupt vector base */ - LOAD_REG_IMMEDIATE(r3, interrupt_base_book3e) + tovirt(r2,r2) + LOAD_REG_ADDR(r3, interrupt_base_book3e) mtspr SPRN_IVPR,r3 sync blr diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index d48125d0c048..1b779560728f 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -182,6 +182,8 @@ exception_marker: #ifdef CONFIG_PPC_BOOK3E _GLOBAL(fsl_secondary_thread_init) + mfspr r4,SPRN_BUCSR + /* Enable branch prediction */ lis r3,BUCSR_INIT@h ori r3,r3,BUCSR_INIT@l @@ -196,10 +198,24 @@ _GLOBAL(fsl_secondary_thread_init) * number. There are two threads per core, so shift everything * but the low bit right by two bits so that the cpu numbering is * continuous. + * + * If the old value of BUCSR is non-zero, this thread has run + * before. Thus, we assume we are coming from kexec or a similar + * scenario, and PIR is already set to the correct value. This + * is a bit of a hack, but there are limited opportunities for + * getting information into the thread and the alternatives + * seemed like they'd be overkill. We can't tell just by looking + * at the old PIR value which state it's in, since the same value + * could be valid for one thread out of reset and for a different + * thread in Linux. */ + mfspr r3, SPRN_PIR + cmpwi r4,0 + bne 1f rlwimi r3, r3, 30, 2, 30 mtspr SPRN_PIR, r3 +1: #endif _GLOBAL(generic_secondary_thread_init) @@ -441,12 +457,22 @@ __after_prom_start: /* process relocations for the final address of the kernel */ lis r25,PAGE_OFFSET@highest /* compute virtual base of kernel */ sldi r25,r25,32 +#if defined(CONFIG_PPC_BOOK3E) + tovirt(r26,r26) /* on booke, we already run at PAGE_OFFSET */ +#endif lwz r7,__run_at_load-_stext(r26) +#if defined(CONFIG_PPC_BOOK3E) + tophys(r26,r26) +#endif cmplwi cr0,r7,1 /* flagged to stay where we are ? */ bne 1f add r25,r25,r26 1: mr r3,r25 bl relocate +#if defined(CONFIG_PPC_BOOK3E) + /* IVPR needs to be set after relocation. */ + bl init_core_book3e +#endif #endif /* @@ -458,15 +484,15 @@ __after_prom_start: */ li r3,0 /* target addr */ #ifdef CONFIG_PPC_BOOK3E - tovirt(r3,r3) /* on booke, we already run at PAGE_OFFSET */ + tovirt(r3,r3) /* on booke, we already run at PAGE_OFFSET */ #endif mr. r4,r26 /* In some cases the loader may */ +#if defined(CONFIG_PPC_BOOK3E) + tovirt(r4,r4) +#endif beq 9f /* have already put us at zero */ li r6,0x100 /* Start offset, the first 0x100 */ /* bytes were copied earlier. */ -#ifdef CONFIG_PPC_BOOK3E - tovirt(r6,r6) /* on booke, we already run at PAGE_OFFSET */ -#endif #ifdef CONFIG_RELOCATABLE /* @@ -474,12 +500,21 @@ __after_prom_start: * variable __run_at_load, if it is set the kernel is treated as relocatable * kernel, otherwise it will be moved to PHYSICAL_START */ +#if defined(CONFIG_PPC_BOOK3E) + tovirt(r26,r26) /* on booke, we already run at PAGE_OFFSET */ +#endif lwz r7,__run_at_load-_stext(r26) cmplwi cr0,r7,1 bne 3f +#ifdef CONFIG_PPC_BOOK3E + LOAD_REG_ADDR(r5, __end_interrupts) + LOAD_REG_ADDR(r11, _stext) + sub r5,r5,r11 +#else /* just copy interrupts */ LOAD_REG_IMMEDIATE(r5, __end_interrupts - _stext) +#endif b 5f 3: #endif diff --git a/arch/powerpc/kernel/io-workarounds.c b/arch/powerpc/kernel/io-workarounds.c index 63d9cc4d7366..5f8613ceb97f 100644 --- a/arch/powerpc/kernel/io-workarounds.c +++ b/arch/powerpc/kernel/io-workarounds.c @@ -76,7 +76,7 @@ struct iowa_bus *iowa_mem_find_bus(const PCI_IO_ADDR addr) * a page table free due to init_mm */ ptep = __find_linux_pte_or_hugepte(init_mm.pgd, vaddr, - &hugepage_shift); + NULL, &hugepage_shift); if (ptep == NULL) paddr = 0; else { diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c index 1a74446fd9e5..0fbd75d185d7 100644 --- a/arch/powerpc/kernel/machine_kexec_64.c +++ b/arch/powerpc/kernel/machine_kexec_64.c @@ -30,6 +30,21 @@ #include <asm/smp.h> #include <asm/hw_breakpoint.h> +#ifdef CONFIG_PPC_BOOK3E +int default_machine_kexec_prepare(struct kimage *image) +{ + int i; + /* + * Since we use the kernel fault handlers and paging code to + * handle the virtual mode, we must make sure no destination + * overlaps kernel static data or bss. + */ + for (i = 0; i < image->nr_segments; i++) + if (image->segment[i].mem < __pa(_end)) + return -ETXTBSY; + return 0; +} +#else int default_machine_kexec_prepare(struct kimage *image) { int i; @@ -95,6 +110,7 @@ int default_machine_kexec_prepare(struct kimage *image) return 0; } +#endif /* !CONFIG_PPC_BOOK3E */ static void copy_segments(unsigned long ind) { @@ -365,6 +381,7 @@ void default_machine_kexec(struct kimage *image) /* NOTREACHED */ } +#ifndef CONFIG_PPC_BOOK3E /* Values we need to export to the second kernel via the device tree. */ static unsigned long htab_base; static unsigned long htab_size; @@ -411,3 +428,4 @@ static int __init export_htab_values(void) return 0; } late_initcall(export_htab_values); +#endif /* !CONFIG_PPC_BOOK3E */ diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index 6e4168cf4698..db475d41b57a 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -26,6 +26,7 @@ #include <asm/thread_info.h> #include <asm/kexec.h> #include <asm/ptrace.h> +#include <asm/mmu.h> .text @@ -484,6 +485,8 @@ _GLOBAL(kexec_wait) mtsrr1 r11 rfid #else + /* Create TLB entry in book3e_secondary_core_init */ + li r4,0 ba 0x60 #endif #endif @@ -496,6 +499,51 @@ kexec_flag: #ifdef CONFIG_KEXEC +#ifdef CONFIG_PPC_BOOK3E +/* + * BOOK3E has no real MMU mode, so we have to setup the initial TLB + * for a core to identity map v:0 to p:0. This current implementation + * assumes that 1G is enough for kexec. + */ +kexec_create_tlb: + /* + * Invalidate all non-IPROT TLB entries to avoid any TLB conflict. + * IPROT TLB entries should be >= PAGE_OFFSET and thus not conflict. + */ + PPC_TLBILX_ALL(0,R0) + sync + isync + + mfspr r10,SPRN_TLB1CFG + andi. r10,r10,TLBnCFG_N_ENTRY /* Extract # entries */ + subi r10,r10,1 /* Last entry: no conflict with kernel text */ + lis r9,MAS0_TLBSEL(1)@h + rlwimi r9,r10,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r9) */ + +/* Set up a temp identity mapping v:0 to p:0 and return to it. */ +#if defined(CONFIG_SMP) || defined(CONFIG_PPC_E500MC) +#define M_IF_NEEDED MAS2_M +#else +#define M_IF_NEEDED 0 +#endif + mtspr SPRN_MAS0,r9 + + lis r9,(MAS1_VALID|MAS1_IPROT)@h + ori r9,r9,(MAS1_TSIZE(BOOK3E_PAGESZ_1GB))@l + mtspr SPRN_MAS1,r9 + + LOAD_REG_IMMEDIATE(r9, 0x0 | M_IF_NEEDED) + mtspr SPRN_MAS2,r9 + + LOAD_REG_IMMEDIATE(r9, 0x0 | MAS3_SR | MAS3_SW | MAS3_SX) + mtspr SPRN_MAS3,r9 + li r9,0 + mtspr SPRN_MAS7,r9 + + tlbwe + isync + blr +#endif /* kexec_smp_wait(void) * @@ -525,6 +573,10 @@ _GLOBAL(kexec_smp_wait) * don't overwrite r3 here, it is live for kexec_wait above. */ real_mode: /* assume normal blr return */ +#ifdef CONFIG_PPC_BOOK3E + /* Create an identity mapping. */ + b kexec_create_tlb +#else 1: li r9,MSR_RI li r10,MSR_DR|MSR_IR mflr r11 /* return address to SRR0 */ @@ -536,7 +588,7 @@ real_mode: /* assume normal blr return */ mtspr SPRN_SRR1,r10 mtspr SPRN_SRR0,r11 rfid - +#endif /* * kexec_sequence(newstack, start, image, control, clear_all()) @@ -579,9 +631,13 @@ _GLOBAL(kexec_sequence) lhz r25,PACAHWCPUID(r13) /* get our phys cpu from paca */ /* disable interrupts, we are overwriting kernel data next */ +#ifdef CONFIG_PPC_BOOK3E + wrteei 0 +#else mfmsr r3 rlwinm r3,r3,0,17,15 mtmsrd r3,1 +#endif /* copy dest pages, flush whole dest image */ mr r3,r29 @@ -603,6 +659,7 @@ _GLOBAL(kexec_sequence) li r6,1 stw r6,kexec_flag-1b(5) +#ifndef CONFIG_PPC_BOOK3E /* clear out hardware hash page table and tlb */ #if !defined(_CALL_ELF) || _CALL_ELF != 2 ld r12,0(r27) /* deref function descriptor */ @@ -611,6 +668,7 @@ _GLOBAL(kexec_sequence) #endif mtctr r12 bctrl /* ppc_md.hpte_clear_all(void); */ +#endif /* !CONFIG_PPC_BOOK3E */ /* * kexec image calling is: diff --git a/arch/powerpc/kernel/nvram_64.c b/arch/powerpc/kernel/nvram_64.c index 98ba106a59ef..32e26526f7e4 100644 --- a/arch/powerpc/kernel/nvram_64.c +++ b/arch/powerpc/kernel/nvram_64.c @@ -1065,7 +1065,7 @@ loff_t __init nvram_create_partition(const char *name, int sig, /* Create our OS partition */ new_part = kmalloc(sizeof(*new_part), GFP_KERNEL); if (!new_part) { - pr_err("nvram_create_os_partition: kmalloc failed\n"); + pr_err("%s: kmalloc failed\n", __func__); return -ENOMEM; } @@ -1077,8 +1077,8 @@ loff_t __init nvram_create_partition(const char *name, int sig, rc = nvram_write_header(new_part); if (rc <= 0) { - pr_err("nvram_create_os_partition: nvram_write_header " - "failed (%d)\n", rc); + pr_err("%s: nvram_write_header failed (%d)\n", __func__, rc); + kfree(new_part); return rc; } list_add_tail(&new_part->partition, &free_part->partition); @@ -1090,8 +1090,8 @@ loff_t __init nvram_create_partition(const char *name, int sig, free_part->header.checksum = nvram_checksum(&free_part->header); rc = nvram_write_header(free_part); if (rc <= 0) { - pr_err("nvram_create_os_partition: nvram_write_header " - "failed (%d)\n", rc); + pr_err("%s: nvram_write_header failed (%d)\n", + __func__, rc); return rc; } } else { @@ -1105,11 +1105,12 @@ loff_t __init nvram_create_partition(const char *name, int sig, tmp_index += NVRAM_BLOCK_LEN) { rc = ppc_md.nvram_write(nv_init_vals, NVRAM_BLOCK_LEN, &tmp_index); if (rc <= 0) { - pr_err("nvram_create_partition: nvram_write failed (%d)\n", rc); + pr_err("%s: nvram_write failed (%d)\n", + __func__, rc); return rc; } } - + return new_part->index + NVRAM_HEADER_LEN; } diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c index 5a23b69f8129..01ea0edf0579 100644 --- a/arch/powerpc/kernel/paca.c +++ b/arch/powerpc/kernel/paca.c @@ -204,14 +204,19 @@ static int __initdata paca_size; void __init allocate_pacas(void) { - int cpu, limit; + u64 limit; + int cpu; + limit = ppc64_rma_size; + +#ifdef CONFIG_PPC_BOOK3S_64 /* * We can't take SLB misses on the paca, and we want to access them * in real mode, so allocate them within the RMA and also within * the first segment. */ - limit = min(0x10000000ULL, ppc64_rma_size); + limit = min(0x10000000ULL, limit); +#endif paca_size = PAGE_ALIGN(sizeof(struct paca_struct) * nr_cpu_ids); diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 7587b2ae5f77..0f7a60f1e9f6 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -100,6 +100,7 @@ void pcibios_free_controller(struct pci_controller *phb) if (phb->is_dynamic) kfree(phb); } +EXPORT_SYMBOL_GPL(pcibios_free_controller); /* * The function is used to return the minimal alignment diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index bef76c5033e4..7030b035905d 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -783,17 +783,19 @@ void __init early_get_first_memblock_info(void *params, phys_addr_t *size) int of_get_ibm_chip_id(struct device_node *np) { of_node_get(np); - while(np) { - struct device_node *old = np; - const __be32 *prop; + while (np) { + u32 chip_id; - prop = of_get_property(np, "ibm,chip-id", NULL); - if (prop) { + /* + * Skiboot may produce memory nodes that contain more than one + * cell in chip-id, we only read the first one here. + */ + if (!of_property_read_u32(np, "ibm,chip-id", &chip_id)) { of_node_put(np); - return be32_to_cpup(prop); + return chip_id; } - np = of_get_parent(np); - of_node_put(old); + + np = of_get_next_parent(np); } return -1; } diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index bdcbb716f4d6..5c03a6a9b054 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -108,6 +108,14 @@ static void setup_tlb_core_data(void) for_each_possible_cpu(cpu) { int first = cpu_first_thread_sibling(cpu); + /* + * If we boot via kdump on a non-primary thread, + * make sure we point at the thread that actually + * set up this TLB. + */ + if (cpu_first_thread_sibling(boot_cpuid) == first) + first = boot_cpuid; + paca[cpu].tcd_ptr = &paca[first].tcd; /* @@ -332,11 +340,26 @@ void early_setup_secondary(void) #endif /* CONFIG_SMP */ #if defined(CONFIG_SMP) || defined(CONFIG_KEXEC) +static bool use_spinloop(void) +{ + if (!IS_ENABLED(CONFIG_PPC_BOOK3E)) + return true; + + /* + * When book3e boots from kexec, the ePAPR spin table does + * not get used. + */ + return of_property_read_bool(of_chosen, "linux,booted-from-kexec"); +} + void smp_release_cpus(void) { unsigned long *ptr; int i; + if (!use_spinloop()) + return; + DBG(" -> smp_release_cpus()\n"); /* All secondary cpus are spinning on a common spinloop, release them @@ -516,7 +539,7 @@ void __init setup_system(void) * Freescale Book3e parts spin in a loop provided by firmware, * so smp_release_cpus() does nothing for them */ -#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_FSL_BOOK3E) +#if defined(CONFIG_SMP) /* Release secondary cpus out of their spinloops at 0x60 now that * we can map physical -> logical CPU ids */ diff --git a/arch/powerpc/kernel/vdso32/Makefile b/arch/powerpc/kernel/vdso32/Makefile index 53e6c9b979ec..6abffb7a8cd9 100644 --- a/arch/powerpc/kernel/vdso32/Makefile +++ b/arch/powerpc/kernel/vdso32/Makefile @@ -18,7 +18,7 @@ GCOV_PROFILE := n ccflags-y := -shared -fno-common -fno-builtin ccflags-y += -nostdlib -Wl,-soname=linux-vdso32.so.1 \ - $(call cc-ldoption, -Wl$(comma)--hash-style=sysv) + $(call cc-ldoption, -Wl$(comma)--hash-style=both) asflags-y := -D__VDSO32__ -s obj-y += vdso32_wrapper.o diff --git a/arch/powerpc/kernel/vdso32/datapage.S b/arch/powerpc/kernel/vdso32/datapage.S index dc21e891d2e7..59cf5f452879 100644 --- a/arch/powerpc/kernel/vdso32/datapage.S +++ b/arch/powerpc/kernel/vdso32/datapage.S @@ -16,6 +16,10 @@ #include <asm/vdso.h> .text + .global __kernel_datapage_offset; +__kernel_datapage_offset: + .long 0 + V_FUNCTION_BEGIN(__get_datapage) .cfi_startproc /* We don't want that exposed or overridable as we want other objects @@ -27,13 +31,11 @@ V_FUNCTION_BEGIN(__get_datapage) mflr r0 .cfi_register lr,r0 - bcl 20,31,1f - .global __kernel_datapage_offset; -__kernel_datapage_offset: - .long 0 -1: + bcl 20,31,data_page_branch +data_page_branch: mflr r3 mtlr r0 + addi r3, r3, __kernel_datapage_offset-data_page_branch lwz r0,0(r3) add r3,r0,r3 blr diff --git a/arch/powerpc/kernel/vdso64/Makefile b/arch/powerpc/kernel/vdso64/Makefile index effca9404b17..8c8f2ae43935 100644 --- a/arch/powerpc/kernel/vdso64/Makefile +++ b/arch/powerpc/kernel/vdso64/Makefile @@ -11,7 +11,7 @@ GCOV_PROFILE := n ccflags-y := -shared -fno-common -fno-builtin ccflags-y += -nostdlib -Wl,-soname=linux-vdso64.so.1 \ - $(call cc-ldoption, -Wl$(comma)--hash-style=sysv) + $(call cc-ldoption, -Wl$(comma)--hash-style=both) asflags-y := -D__VDSO64__ -s obj-y += vdso64_wrapper.o diff --git a/arch/powerpc/kernel/vdso64/datapage.S b/arch/powerpc/kernel/vdso64/datapage.S index 79796de11737..2f01c4a0d8a0 100644 --- a/arch/powerpc/kernel/vdso64/datapage.S +++ b/arch/powerpc/kernel/vdso64/datapage.S @@ -16,6 +16,10 @@ #include <asm/vdso.h> .text +.global __kernel_datapage_offset; +__kernel_datapage_offset: + .long 0 + V_FUNCTION_BEGIN(__get_datapage) .cfi_startproc /* We don't want that exposed or overridable as we want other objects @@ -27,13 +31,11 @@ V_FUNCTION_BEGIN(__get_datapage) mflr r0 .cfi_register lr,r0 - bcl 20,31,1f - .global __kernel_datapage_offset; -__kernel_datapage_offset: - .long 0 -1: + bcl 20,31,data_page_branch +data_page_branch: mflr r3 mtlr r0 + addi r3, r3, __kernel_datapage_offset-data_page_branch lwz r0,0(r3) add r3,r0,r3 blr diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 1db685104ffc..d41fd0af8980 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -183,6 +183,12 @@ SECTIONS *(.rela*) } #endif + /* .exit.data is discarded at runtime, not link time, + * to deal with references from .exit.text + */ + .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { + EXIT_DATA + } /* freed after init ends here */ . = ALIGN(PAGE_SIZE); diff --git a/arch/powerpc/kvm/book3s_64_mmu_hv.c b/arch/powerpc/kvm/book3s_64_mmu_hv.c index 10722b1e38b5..fb37290a57b4 100644 --- a/arch/powerpc/kvm/book3s_64_mmu_hv.c +++ b/arch/powerpc/kvm/book3s_64_mmu_hv.c @@ -544,7 +544,7 @@ int kvmppc_book3s_hv_page_fault(struct kvm_run *run, struct kvm_vcpu *vcpu, */ local_irq_save(flags); ptep = find_linux_pte_or_hugepte(current->mm->pgd, - hva, NULL); + hva, NULL, NULL); if (ptep) { pte = kvmppc_read_update_linux_pte(ptep, 1); if (pte_write(pte)) diff --git a/arch/powerpc/kvm/book3s_hv_rm_mmu.c b/arch/powerpc/kvm/book3s_hv_rm_mmu.c index 97e7f8c853d8..91700518bbf3 100644 --- a/arch/powerpc/kvm/book3s_hv_rm_mmu.c +++ b/arch/powerpc/kvm/book3s_hv_rm_mmu.c @@ -32,7 +32,7 @@ static void *real_vmalloc_addr(void *x) * So don't worry about THP collapse/split. Called * Only in realmode, hence won't need irq_save/restore. */ - p = __find_linux_pte_or_hugepte(swapper_pg_dir, addr, NULL); + p = __find_linux_pte_or_hugepte(swapper_pg_dir, addr, NULL, NULL); if (!p || !pte_present(*p)) return NULL; addr = (pte_pfn(*p) << PAGE_SHIFT) | (addr & ~PAGE_MASK); @@ -221,10 +221,12 @@ long kvmppc_do_h_enter(struct kvm *kvm, unsigned long flags, * retry via mmu_notifier_retry. */ if (realmode) - ptep = __find_linux_pte_or_hugepte(pgdir, hva, &hpage_shift); + ptep = __find_linux_pte_or_hugepte(pgdir, hva, NULL, + &hpage_shift); else { local_irq_save(irq_flags); - ptep = find_linux_pte_or_hugepte(pgdir, hva, &hpage_shift); + ptep = find_linux_pte_or_hugepte(pgdir, hva, NULL, + &hpage_shift); } if (ptep) { pte_t pte; diff --git a/arch/powerpc/kvm/e500_mmu_host.c b/arch/powerpc/kvm/e500_mmu_host.c index 5e2102c19586..34c43fff4adb 100644 --- a/arch/powerpc/kvm/e500_mmu_host.c +++ b/arch/powerpc/kvm/e500_mmu_host.c @@ -476,7 +476,7 @@ static inline int kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500, * can't run hence pfn won't change. */ local_irq_save(flags); - ptep = find_linux_pte_or_hugepte(pgdir, hva, NULL); + ptep = find_linux_pte_or_hugepte(pgdir, hva, NULL, NULL); if (ptep) { pte_t pte = READ_ONCE(*ptep); diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c index 354ba3c09ef3..f3afe3d97f6b 100644 --- a/arch/powerpc/mm/fsl_booke_mmu.c +++ b/arch/powerpc/mm/fsl_booke_mmu.c @@ -141,8 +141,6 @@ static void settlbcam(int index, unsigned long virt, phys_addr_t phys, tlbcam_addrs[index].start = virt; tlbcam_addrs[index].limit = virt + size - 1; tlbcam_addrs[index].phys = phys; - - loadcam_entry(index); } unsigned long calc_cam_sz(unsigned long ram, unsigned long virt, @@ -171,7 +169,8 @@ unsigned long calc_cam_sz(unsigned long ram, unsigned long virt, } static unsigned long map_mem_in_cams_addr(phys_addr_t phys, unsigned long virt, - unsigned long ram, int max_cam_idx) + unsigned long ram, int max_cam_idx, + bool dryrun) { int i; unsigned long amount_mapped = 0; @@ -181,13 +180,20 @@ static unsigned long map_mem_in_cams_addr(phys_addr_t phys, unsigned long virt, unsigned long cam_sz; cam_sz = calc_cam_sz(ram, virt, phys); - settlbcam(i, virt, phys, cam_sz, pgprot_val(PAGE_KERNEL_X), 0); + if (!dryrun) + settlbcam(i, virt, phys, cam_sz, + pgprot_val(PAGE_KERNEL_X), 0); ram -= cam_sz; amount_mapped += cam_sz; virt += cam_sz; phys += cam_sz; } + + if (dryrun) + return amount_mapped; + + loadcam_multi(0, i, max_cam_idx); tlbcam_index = i; #ifdef CONFIG_PPC64 @@ -199,12 +205,12 @@ static unsigned long map_mem_in_cams_addr(phys_addr_t phys, unsigned long virt, return amount_mapped; } -unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx) +unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx, bool dryrun) { unsigned long virt = PAGE_OFFSET; phys_addr_t phys = memstart_addr; - return map_mem_in_cams_addr(phys, virt, ram, max_cam_idx); + return map_mem_in_cams_addr(phys, virt, ram, max_cam_idx, dryrun); } #ifdef CONFIG_PPC32 @@ -235,7 +241,7 @@ void __init adjust_total_lowmem(void) ram = min((phys_addr_t)__max_low_memory, (phys_addr_t)total_lowmem); i = switch_to_as1(); - __max_low_memory = map_mem_in_cams(ram, CONFIG_LOWMEM_CAM_NUM); + __max_low_memory = map_mem_in_cams(ram, CONFIG_LOWMEM_CAM_NUM, false); restore_to_as0(i, 0, 0, 1); pr_info("Memory CAM mapping: "); @@ -303,10 +309,12 @@ notrace void __init relocate_init(u64 dt_ptr, phys_addr_t start) n = switch_to_as1(); /* map a 64M area for the second relocation */ if (memstart_addr > start) - map_mem_in_cams(0x4000000, CONFIG_LOWMEM_CAM_NUM); + map_mem_in_cams(0x4000000, CONFIG_LOWMEM_CAM_NUM, + false); else map_mem_in_cams_addr(start, PAGE_OFFSET + offset, - 0x4000000, CONFIG_LOWMEM_CAM_NUM); + 0x4000000, CONFIG_LOWMEM_CAM_NUM, + false); restore_to_as0(n, offset, __va(dt_ptr), 1); /* We should never reach here */ panic("Relocation error"); diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index aee70171355b..7f9616f7c479 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -994,6 +994,7 @@ int hash_page_mm(struct mm_struct *mm, unsigned long ea, unsigned long access, unsigned long trap, unsigned long flags) { + bool is_thp; enum ctx_state prev_state = exception_enter(); pgd_t *pgdir; unsigned long vsid; @@ -1068,7 +1069,7 @@ int hash_page_mm(struct mm_struct *mm, unsigned long ea, #endif /* CONFIG_PPC_64K_PAGES */ /* Get PTE and page size from page tables */ - ptep = __find_linux_pte_or_hugepte(pgdir, ea, &hugeshift); + ptep = __find_linux_pte_or_hugepte(pgdir, ea, &is_thp, &hugeshift); if (ptep == NULL || !pte_present(*ptep)) { DBG_LOW(" no PTE !\n"); rc = 1; @@ -1088,7 +1089,7 @@ int hash_page_mm(struct mm_struct *mm, unsigned long ea, } if (hugeshift) { - if (pmd_trans_huge(*(pmd_t *)ptep)) + if (is_thp) rc = __hash_page_thp(ea, access, vsid, (pmd_t *)ptep, trap, flags, ssize, psize); #ifdef CONFIG_HUGETLB_PAGE @@ -1243,7 +1244,7 @@ void hash_preload(struct mm_struct *mm, unsigned long ea, * THP pages use update_mmu_cache_pmd. We don't do * hash preload there. Hence can ignore THP here */ - ptep = find_linux_pte_or_hugepte(pgdir, ea, &hugepage_shift); + ptep = find_linux_pte_or_hugepte(pgdir, ea, NULL, &hugepage_shift); if (!ptep) goto out_exit; diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 06c14523b787..9833fee493ec 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -89,6 +89,25 @@ int pgd_huge(pgd_t pgd) */ return ((pgd_val(pgd) & 0x3) != 0x0); } + +#if defined(CONFIG_PPC_64K_PAGES) && defined(CONFIG_DEBUG_VM) +/* + * This enables us to catch the wrong page directory format + * Moved here so that we can use WARN() in the call. + */ +int hugepd_ok(hugepd_t hpd) +{ + bool is_hugepd; + + /* + * We should not find this format in page directory, warn otherwise. + */ + is_hugepd = (((hpd.pd & 0x3) == 0x0) && ((hpd.pd & HUGEPD_SHIFT_MASK) != 0)); + WARN(is_hugepd, "Found wrong page directory format\n"); + return 0; +} +#endif + #else int pmd_huge(pmd_t pmd) { @@ -109,7 +128,7 @@ int pgd_huge(pgd_t pgd) pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) { /* Only called for hugetlbfs pages, hence can ignore THP */ - return __find_linux_pte_or_hugepte(mm->pgd, addr, NULL); + return __find_linux_pte_or_hugepte(mm->pgd, addr, NULL, NULL); } static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp, @@ -684,13 +703,14 @@ void hugetlb_free_pgd_range(struct mmu_gather *tlb, struct page * follow_huge_addr(struct mm_struct *mm, unsigned long address, int write) { + bool is_thp; pte_t *ptep, pte; unsigned shift; unsigned long mask, flags; struct page *page = ERR_PTR(-EINVAL); local_irq_save(flags); - ptep = find_linux_pte_or_hugepte(mm->pgd, address, &shift); + ptep = find_linux_pte_or_hugepte(mm->pgd, address, &is_thp, &shift); if (!ptep) goto no_page; pte = READ_ONCE(*ptep); @@ -699,7 +719,7 @@ follow_huge_addr(struct mm_struct *mm, unsigned long address, int write) * Transparent hugepages are handled by generic code. We can skip them * here. */ - if (!shift || pmd_trans_huge(__pmd(pte_val(pte)))) + if (!shift || is_thp) goto no_page; if (!pte_present(pte)) { @@ -956,7 +976,7 @@ void flush_dcache_icache_hugepage(struct page *page) */ pte_t *__find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea, - unsigned *shift) + bool *is_thp, unsigned *shift) { pgd_t pgd, *pgdp; pud_t pud, *pudp; @@ -968,6 +988,9 @@ pte_t *__find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea, if (shift) *shift = 0; + if (is_thp) + *is_thp = false; + pgdp = pgdir + pgd_index(ea); pgd = READ_ONCE(*pgdp); /* @@ -1015,7 +1038,14 @@ pte_t *__find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea, if (pmd_none(pmd)) return NULL; - if (pmd_huge(pmd) || pmd_large(pmd)) { + if (pmd_trans_huge(pmd)) { + if (is_thp) + *is_thp = true; + ret_pte = (pte_t *) pmdp; + goto out; + } + + if (pmd_huge(pmd)) { ret_pte = (pte_t *) pmdp; goto out; } else if (is_hugepd(__hugepd(pmd_val(pmd)))) diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h index 085b66b10891..9f58ff44a075 100644 --- a/arch/powerpc/mm/mmu_decl.h +++ b/arch/powerpc/mm/mmu_decl.h @@ -141,7 +141,8 @@ extern void MMU_init_hw(void); extern unsigned long mmu_mapin_ram(unsigned long top); #elif defined(CONFIG_PPC_FSL_BOOK3E) -extern unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx); +extern unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx, + bool dryrun); extern unsigned long calc_cam_sz(unsigned long ram, unsigned long virt, phys_addr_t phys); #ifdef CONFIG_PPC32 @@ -152,6 +153,7 @@ extern int switch_to_as1(void); extern void restore_to_as0(int esel, int offset, void *dt_ptr, int bootcpu); #endif extern void loadcam_entry(unsigned int index); +extern void loadcam_multi(int first_idx, int num, int tmp_idx); struct tlbcam { u32 MAS0; diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 8d8a541211d0..669a15e7fa76 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -276,7 +276,6 @@ static int of_node_to_nid_single(struct device_node *device) /* Walk the device tree upwards, looking for an associativity id */ int of_node_to_nid(struct device_node *device) { - struct device_node *tmp; int nid = -1; of_node_get(device); @@ -285,9 +284,7 @@ int of_node_to_nid(struct device_node *device) if (nid != -1) break; - tmp = device; - device = of_get_parent(tmp); - of_node_put(tmp); + device = of_get_next_parent(device); } of_node_put(device); diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c index 8a32a2be3c53..515730e499fe 100644 --- a/arch/powerpc/mm/slb.c +++ b/arch/powerpc/mm/slb.c @@ -25,6 +25,11 @@ #include <asm/udbg.h> #include <asm/code-patching.h> +enum slb_index { + LINEAR_INDEX = 0, /* Kernel linear map (0xc000000000000000) */ + VMALLOC_INDEX = 1, /* Kernel virtual map (0xd000000000000000) */ + KSTACK_INDEX = 2, /* Kernel stack map */ +}; extern void slb_allocate_realmode(unsigned long ea); extern void slb_allocate_user(unsigned long ea); @@ -41,9 +46,9 @@ static void slb_allocate(unsigned long ea) (((ssize) == MMU_SEGSIZE_256M)? ESID_MASK: ESID_MASK_1T) static inline unsigned long mk_esid_data(unsigned long ea, int ssize, - unsigned long entry) + enum slb_index index) { - return (ea & slb_esid_mask(ssize)) | SLB_ESID_V | entry; + return (ea & slb_esid_mask(ssize)) | SLB_ESID_V | index; } static inline unsigned long mk_vsid_data(unsigned long ea, int ssize, @@ -55,39 +60,39 @@ static inline unsigned long mk_vsid_data(unsigned long ea, int ssize, static inline void slb_shadow_update(unsigned long ea, int ssize, unsigned long flags, - unsigned long entry) + enum slb_index index) { + struct slb_shadow *p = get_slb_shadow(); + /* * Clear the ESID first so the entry is not valid while we are * updating it. No write barriers are needed here, provided * we only update the current CPU's SLB shadow buffer. */ - get_slb_shadow()->save_area[entry].esid = 0; - get_slb_shadow()->save_area[entry].vsid = - cpu_to_be64(mk_vsid_data(ea, ssize, flags)); - get_slb_shadow()->save_area[entry].esid = - cpu_to_be64(mk_esid_data(ea, ssize, entry)); + p->save_area[index].esid = 0; + p->save_area[index].vsid = cpu_to_be64(mk_vsid_data(ea, ssize, flags)); + p->save_area[index].esid = cpu_to_be64(mk_esid_data(ea, ssize, index)); } -static inline void slb_shadow_clear(unsigned long entry) +static inline void slb_shadow_clear(enum slb_index index) { - get_slb_shadow()->save_area[entry].esid = 0; + get_slb_shadow()->save_area[index].esid = 0; } static inline void create_shadowed_slbe(unsigned long ea, int ssize, unsigned long flags, - unsigned long entry) + enum slb_index index) { /* * Updating the shadow buffer before writing the SLB ensures * we don't get a stale entry here if we get preempted by PHYP * between these two statements. */ - slb_shadow_update(ea, ssize, flags, entry); + slb_shadow_update(ea, ssize, flags, index); asm volatile("slbmte %0,%1" : : "r" (mk_vsid_data(ea, ssize, flags)), - "r" (mk_esid_data(ea, ssize, entry)) + "r" (mk_esid_data(ea, ssize, index)) : "memory" ); } @@ -103,16 +108,16 @@ static void __slb_flush_and_rebolt(void) lflags = SLB_VSID_KERNEL | linear_llp; vflags = SLB_VSID_KERNEL | vmalloc_llp; - ksp_esid_data = mk_esid_data(get_paca()->kstack, mmu_kernel_ssize, 2); + ksp_esid_data = mk_esid_data(get_paca()->kstack, mmu_kernel_ssize, KSTACK_INDEX); if ((ksp_esid_data & ~0xfffffffUL) <= PAGE_OFFSET) { ksp_esid_data &= ~SLB_ESID_V; ksp_vsid_data = 0; - slb_shadow_clear(2); + slb_shadow_clear(KSTACK_INDEX); } else { /* Update stack entry; others don't change */ - slb_shadow_update(get_paca()->kstack, mmu_kernel_ssize, lflags, 2); + slb_shadow_update(get_paca()->kstack, mmu_kernel_ssize, lflags, KSTACK_INDEX); ksp_vsid_data = - be64_to_cpu(get_slb_shadow()->save_area[2].vsid); + be64_to_cpu(get_slb_shadow()->save_area[KSTACK_INDEX].vsid); } /* We need to do this all in asm, so we're sure we don't touch @@ -151,7 +156,7 @@ void slb_vmalloc_update(void) unsigned long vflags; vflags = SLB_VSID_KERNEL | mmu_psize_defs[mmu_vmalloc_psize].sllp; - slb_shadow_update(VMALLOC_START, mmu_kernel_ssize, vflags, 1); + slb_shadow_update(VMALLOC_START, mmu_kernel_ssize, vflags, VMALLOC_INDEX); slb_flush_and_rebolt(); } @@ -326,19 +331,19 @@ void slb_initialize(void) asm volatile("isync":::"memory"); asm volatile("slbmte %0,%0"::"r" (0) : "memory"); asm volatile("isync; slbia; isync":::"memory"); - create_shadowed_slbe(PAGE_OFFSET, mmu_kernel_ssize, lflags, 0); - create_shadowed_slbe(VMALLOC_START, mmu_kernel_ssize, vflags, 1); + create_shadowed_slbe(PAGE_OFFSET, mmu_kernel_ssize, lflags, LINEAR_INDEX); + create_shadowed_slbe(VMALLOC_START, mmu_kernel_ssize, vflags, VMALLOC_INDEX); /* For the boot cpu, we're running on the stack in init_thread_union, * which is in the first segment of the linear mapping, and also * get_paca()->kstack hasn't been initialized yet. * For secondary cpus, we need to bolt the kernel stack entry now. */ - slb_shadow_clear(2); + slb_shadow_clear(KSTACK_INDEX); if (raw_smp_processor_id() != boot_cpuid && (get_paca()->kstack & slb_esid_mask(mmu_kernel_ssize)) > PAGE_OFFSET) create_shadowed_slbe(get_paca()->kstack, - mmu_kernel_ssize, lflags, 2); + mmu_kernel_ssize, lflags, KSTACK_INDEX); asm volatile("isync":::"memory"); } diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c index c522969f012d..f7b80391bee7 100644 --- a/arch/powerpc/mm/tlb_hash64.c +++ b/arch/powerpc/mm/tlb_hash64.c @@ -190,6 +190,7 @@ void tlb_flush(struct mmu_gather *tlb) void __flush_hash_table_range(struct mm_struct *mm, unsigned long start, unsigned long end) { + bool is_thp; int hugepage_shift; unsigned long flags; @@ -208,21 +209,21 @@ void __flush_hash_table_range(struct mm_struct *mm, unsigned long start, local_irq_save(flags); arch_enter_lazy_mmu_mode(); for (; start < end; start += PAGE_SIZE) { - pte_t *ptep = find_linux_pte_or_hugepte(mm->pgd, start, + pte_t *ptep = find_linux_pte_or_hugepte(mm->pgd, start, &is_thp, &hugepage_shift); unsigned long pte; if (ptep == NULL) continue; pte = pte_val(*ptep); - if (hugepage_shift) + if (is_thp) trace_hugepage_invalidate(start, pte); if (!(pte & _PAGE_HASHPTE)) continue; - if (unlikely(hugepage_shift && pmd_trans_huge(*(pmd_t *)pte))) + if (unlikely(is_thp)) hpte_do_hugepage_flush(mm, start, (pmd_t *)ptep, pte); else - hpte_need_flush(mm, start, ptep, pte, 0); + hpte_need_flush(mm, start, ptep, pte, hugepage_shift); } arch_leave_lazy_mmu_mode(); local_irq_restore(flags); diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S index e4185581c5a7..29d6987c37ba 100644 --- a/arch/powerpc/mm/tlb_low_64e.S +++ b/arch/powerpc/mm/tlb_low_64e.S @@ -68,11 +68,17 @@ END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV) ld r14,PACAPGD(r13) std r15,EX_TLB_R15(r12) std r10,EX_TLB_CR(r12) +#ifdef CONFIG_PPC_FSL_BOOK3E + std r7,EX_TLB_R7(r12) +#endif TLB_MISS_PROLOG_STATS .endm .macro tlb_epilog_bolted ld r14,EX_TLB_CR(r12) +#ifdef CONFIG_PPC_FSL_BOOK3E + ld r7,EX_TLB_R7(r12) +#endif ld r10,EX_TLB_R10(r12) ld r11,EX_TLB_R11(r12) ld r13,EX_TLB_R13(r12) @@ -297,6 +303,7 @@ itlb_miss_fault_bolted: * r13 = PACA * r11 = tlb_per_core ptr * r10 = crap (free to use) + * r7 = esel_next */ tlb_miss_common_e6500: crmove cr2*4+2,cr0*4+2 /* cr2.eq != 0 if kernel address */ @@ -325,7 +332,11 @@ BEGIN_FTR_SECTION /* CPU_FTR_SMT */ bne 10b b 1b .previous +END_FTR_SECTION_IFSET(CPU_FTR_SMT) + + lbz r7,TCD_ESEL_NEXT(r11) +BEGIN_FTR_SECTION /* CPU_FTR_SMT */ /* * Erratum A-008139 says that we can't use tlbwe to change * an indirect entry in any way (including replacing or @@ -334,8 +345,7 @@ BEGIN_FTR_SECTION /* CPU_FTR_SMT */ * with tlbilx before overwriting. */ - lbz r15,TCD_ESEL_NEXT(r11) - rlwinm r10,r15,16,0xff0000 + rlwinm r10,r7,16,0xff0000 oris r10,r10,MAS0_TLBSEL(1)@h mtspr SPRN_MAS0,r10 isync @@ -429,15 +439,14 @@ ALT_FTR_SECTION_END_IFSET(CPU_FTR_SMT) mtspr SPRN_MAS2,r15 tlb_miss_huge_done_e6500: - lbz r15,TCD_ESEL_NEXT(r11) lbz r16,TCD_ESEL_MAX(r11) lbz r14,TCD_ESEL_FIRST(r11) - rlwimi r10,r15,16,0x00ff0000 /* insert esel_next into MAS0 */ - addi r15,r15,1 /* increment esel_next */ + rlwimi r10,r7,16,0x00ff0000 /* insert esel_next into MAS0 */ + addi r7,r7,1 /* increment esel_next */ mtspr SPRN_MAS0,r10 - cmpw r15,r16 - iseleq r15,r14,r15 /* if next == last use first */ - stb r15,TCD_ESEL_NEXT(r11) + cmpw r7,r16 + iseleq r7,r14,r7 /* if next == last use first */ + stb r7,TCD_ESEL_NEXT(r11) tlbwe diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c index 723a099f6be3..bb04e4df3100 100644 --- a/arch/powerpc/mm/tlb_nohash.c +++ b/arch/powerpc/mm/tlb_nohash.c @@ -42,6 +42,7 @@ #include <asm/tlbflush.h> #include <asm/tlb.h> #include <asm/code-patching.h> +#include <asm/cputhreads.h> #include <asm/hugetlb.h> #include <asm/paca.h> @@ -628,10 +629,26 @@ static void early_init_this_mmu(void) #ifdef CONFIG_PPC_FSL_BOOK3E if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) { unsigned int num_cams; + int __maybe_unused cpu = smp_processor_id(); + bool map = true; /* use a quarter of the TLBCAM for bolted linear map */ num_cams = (mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY) / 4; - linear_map_top = map_mem_in_cams(linear_map_top, num_cams); + + /* + * Only do the mapping once per core, or else the + * transient mapping would cause problems. + */ +#ifdef CONFIG_SMP + if (cpu != boot_cpuid && + (cpu != cpu_first_thread_sibling(cpu) || + cpu == cpu_first_thread_sibling(boot_cpuid))) + map = false; +#endif + + if (map) + linear_map_top = map_mem_in_cams(linear_map_top, + num_cams, false); } #endif @@ -729,10 +746,14 @@ void setup_initial_memory_limit(phys_addr_t first_memblock_base, * entries are supported though that may eventually * change. * - * on FSL Embedded 64-bit, we adjust the RMA size to match the - * first bolted TLB entry size. We still limit max to 1G even if - * the TLB could cover more. This is due to what the early init - * code is setup to do. + * on FSL Embedded 64-bit, usually all RAM is bolted, but with + * unusual memory sizes it's possible for some RAM to not be mapped + * (such RAM is not used at all by Linux, since we don't support + * highmem on 64-bit). We limit ppc64_rma_size to what would be + * mappable if this memblock is the only one. Additional memblocks + * can only increase, not decrease, the amount that ends up getting + * mapped. We still limit max to 1G even if we'll eventually map + * more. This is due to what the early init code is set up to do. * * We crop it to the size of the first MEMBLOCK to * avoid going over total available memory just in case... @@ -740,8 +761,14 @@ void setup_initial_memory_limit(phys_addr_t first_memblock_base, #ifdef CONFIG_PPC_FSL_BOOK3E if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) { unsigned long linear_sz; - linear_sz = calc_cam_sz(first_memblock_size, PAGE_OFFSET, - first_memblock_base); + unsigned int num_cams; + + /* use a quarter of the TLBCAM for bolted linear map */ + num_cams = (mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY) / 4; + + linear_sz = map_mem_in_cams(first_memblock_size, num_cams, + true); + ppc64_rma_size = min_t(u64, linear_sz, 0x40000000); } else #endif diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S index 43ff3c797fbf..68c477592e43 100644 --- a/arch/powerpc/mm/tlb_nohash_low.S +++ b/arch/powerpc/mm/tlb_nohash_low.S @@ -400,6 +400,7 @@ _GLOBAL(set_context) * extern void loadcam_entry(unsigned int index) * * Load TLBCAM[index] entry in to the L2 CAM MMU + * Must preserve r7, r8, r9, and r10 */ _GLOBAL(loadcam_entry) mflr r5 @@ -423,4 +424,66 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS) tlbwe isync blr + +/* + * Load multiple TLB entries at once, using an alternate-space + * trampoline so that we don't have to care about whether the same + * TLB entry maps us before and after. + * + * r3 = first entry to write + * r4 = number of entries to write + * r5 = temporary tlb entry + */ +_GLOBAL(loadcam_multi) + mflr r8 + + /* + * Set up temporary TLB entry that is the same as what we're + * running from, but in AS=1. + */ + bl 1f +1: mflr r6 + tlbsx 0,r8 + mfspr r6,SPRN_MAS1 + ori r6,r6,MAS1_TS + mtspr SPRN_MAS1,r6 + mfspr r6,SPRN_MAS0 + rlwimi r6,r5,MAS0_ESEL_SHIFT,MAS0_ESEL_MASK + mr r7,r5 + mtspr SPRN_MAS0,r6 + isync + tlbwe + isync + + /* Switch to AS=1 */ + mfmsr r6 + ori r6,r6,MSR_IS|MSR_DS + mtmsr r6 + isync + + mr r9,r3 + add r10,r3,r4 +2: bl loadcam_entry + addi r9,r9,1 + cmpw r9,r10 + mr r3,r9 + blt 2b + + /* Return to AS=0 and clear the temporary entry */ + mfmsr r6 + rlwinm. r6,r6,0,~(MSR_IS|MSR_DS) + mtmsr r6 + isync + + li r6,0 + mtspr SPRN_MAS1,r6 + rlwinm r6,r7,MAS0_ESEL_SHIFT,MAS0_ESEL_MASK + oris r6,r6,MAS0_TLBSEL(1)@h + mtspr SPRN_MAS0,r6 + isync + tlbwe + isync + + mtlr r8 + blr #endif diff --git a/arch/powerpc/perf/callchain.c b/arch/powerpc/perf/callchain.c index ff09cde20cd2..e04a6752b399 100644 --- a/arch/powerpc/perf/callchain.c +++ b/arch/powerpc/perf/callchain.c @@ -127,7 +127,7 @@ static int read_user_stack_slow(void __user *ptr, void *buf, int nb) return -EFAULT; local_irq_save(flags); - ptep = find_linux_pte_or_hugepte(pgdir, addr, &shift); + ptep = find_linux_pte_or_hugepte(pgdir, addr, NULL, &shift); if (!ptep) goto err_out; if (!shift) diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig index 48bf38d0de35..f09016f6b3a6 100644 --- a/arch/powerpc/platforms/512x/Kconfig +++ b/arch/powerpc/platforms/512x/Kconfig @@ -10,6 +10,12 @@ config PPC_MPC512x select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD +config MPC512x_LPBFIFO + tristate "MPC512x LocalPlus Bus FIFO driver" + depends on PPC_MPC512x && MPC512X_DMA + help + Enable support for Freescale MPC512x LocalPlus Bus FIFO (SCLPC). + config MPC5121_ADS bool "Freescale MPC5121E ADS" depends on PPC_MPC512x diff --git a/arch/powerpc/platforms/512x/Makefile b/arch/powerpc/platforms/512x/Makefile index 01693121a2b1..f47d422953df 100644 --- a/arch/powerpc/platforms/512x/Makefile +++ b/arch/powerpc/platforms/512x/Makefile @@ -5,4 +5,5 @@ obj-$(CONFIG_COMMON_CLK) += clock-commonclk.o obj-y += mpc512x_shared.o obj-$(CONFIG_MPC5121_ADS) += mpc5121_ads.o mpc5121_ads_cpld.o obj-$(CONFIG_MPC512x_GENERIC) += mpc512x_generic.o +obj-$(CONFIG_MPC512x_LPBFIFO) += mpc512x_lpbfifo.o obj-$(CONFIG_PDM360NG) += pdm360ng.o diff --git a/arch/powerpc/platforms/512x/mpc512x_lpbfifo.c b/arch/powerpc/platforms/512x/mpc512x_lpbfifo.c new file mode 100644 index 000000000000..8eb82b043dd8 --- /dev/null +++ b/arch/powerpc/platforms/512x/mpc512x_lpbfifo.c @@ -0,0 +1,540 @@ +/* + * The driver for Freescale MPC512x LocalPlus Bus FIFO + * (called SCLPC in the Reference Manual). + * + * Copyright (C) 2013-2015 Alexander Popov <alex.popov@linux.com>. + * + * This file is released under the GPLv2. + */ + +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <asm/mpc5121.h> +#include <asm/io.h> +#include <linux/spinlock.h> +#include <linux/slab.h> +#include <linux/dmaengine.h> +#include <linux/dma-direction.h> +#include <linux/dma-mapping.h> + +#define DRV_NAME "mpc512x_lpbfifo" + +struct cs_range { + u32 csnum; + u32 base; /* must be zero */ + u32 addr; + u32 size; +}; + +static struct lpbfifo_data { + spinlock_t lock; /* for protecting lpbfifo_data */ + phys_addr_t regs_phys; + resource_size_t regs_size; + struct mpc512x_lpbfifo __iomem *regs; + int irq; + struct cs_range *cs_ranges; + size_t cs_n; + struct dma_chan *chan; + struct mpc512x_lpbfifo_request *req; + dma_addr_t ram_bus_addr; + bool wait_lpbfifo_irq; + bool wait_lpbfifo_callback; +} lpbfifo; + +/* + * A data transfer from RAM to some device on LPB is finished + * when both mpc512x_lpbfifo_irq() and mpc512x_lpbfifo_callback() + * have been called. We execute the callback registered in + * mpc512x_lpbfifo_request just after that. + * But for a data transfer from some device on LPB to RAM we don't enable + * LPBFIFO interrupt because clearing MPC512X_SCLPC_SUCCESS interrupt flag + * automatically disables LPBFIFO reading request to the DMA controller + * and the data transfer hangs. So the callback registered in + * mpc512x_lpbfifo_request is executed at the end of mpc512x_lpbfifo_callback(). + */ + +/* + * mpc512x_lpbfifo_irq - IRQ handler for LPB FIFO + */ +static irqreturn_t mpc512x_lpbfifo_irq(int irq, void *param) +{ + struct device *dev = (struct device *)param; + struct mpc512x_lpbfifo_request *req = NULL; + unsigned long flags; + u32 status; + + spin_lock_irqsave(&lpbfifo.lock, flags); + + if (!lpbfifo.regs) + goto end; + + req = lpbfifo.req; + if (!req || req->dir == MPC512X_LPBFIFO_REQ_DIR_READ) { + dev_err(dev, "bogus LPBFIFO IRQ\n"); + goto end; + } + + status = in_be32(&lpbfifo.regs->status); + if (status != MPC512X_SCLPC_SUCCESS) { + dev_err(dev, "DMA transfer from RAM to peripheral failed\n"); + out_be32(&lpbfifo.regs->enable, + MPC512X_SCLPC_RESET | MPC512X_SCLPC_FIFO_RESET); + goto end; + } + /* Clear the interrupt flag */ + out_be32(&lpbfifo.regs->status, MPC512X_SCLPC_SUCCESS); + + lpbfifo.wait_lpbfifo_irq = false; + + if (lpbfifo.wait_lpbfifo_callback) + goto end; + + /* Transfer is finished, set the FIFO as idle */ + lpbfifo.req = NULL; + + spin_unlock_irqrestore(&lpbfifo.lock, flags); + + if (req->callback) + req->callback(req); + + return IRQ_HANDLED; + + end: + spin_unlock_irqrestore(&lpbfifo.lock, flags); + return IRQ_HANDLED; +} + +/* + * mpc512x_lpbfifo_callback is called by DMA driver when + * DMA transaction is finished. + */ +static void mpc512x_lpbfifo_callback(void *param) +{ + unsigned long flags; + struct mpc512x_lpbfifo_request *req = NULL; + enum dma_data_direction dir; + + spin_lock_irqsave(&lpbfifo.lock, flags); + + if (!lpbfifo.regs) { + spin_unlock_irqrestore(&lpbfifo.lock, flags); + return; + } + + req = lpbfifo.req; + if (!req) { + pr_err("bogus LPBFIFO callback\n"); + spin_unlock_irqrestore(&lpbfifo.lock, flags); + return; + } + + /* Release the mapping */ + if (req->dir == MPC512X_LPBFIFO_REQ_DIR_WRITE) + dir = DMA_TO_DEVICE; + else + dir = DMA_FROM_DEVICE; + dma_unmap_single(lpbfifo.chan->device->dev, + lpbfifo.ram_bus_addr, req->size, dir); + + lpbfifo.wait_lpbfifo_callback = false; + + if (!lpbfifo.wait_lpbfifo_irq) { + /* Transfer is finished, set the FIFO as idle */ + lpbfifo.req = NULL; + + spin_unlock_irqrestore(&lpbfifo.lock, flags); + + if (req->callback) + req->callback(req); + } else { + spin_unlock_irqrestore(&lpbfifo.lock, flags); + } +} + +static int mpc512x_lpbfifo_kick(void) +{ + u32 bits; + bool no_incr = false; + u32 bpt = 32; /* max bytes per LPBFIFO transaction involving DMA */ + u32 cs = 0; + size_t i; + struct dma_device *dma_dev = NULL; + struct scatterlist sg; + enum dma_data_direction dir; + struct dma_slave_config dma_conf = {}; + struct dma_async_tx_descriptor *dma_tx = NULL; + dma_cookie_t cookie; + int ret; + + /* + * 1. Fit the requirements: + * - the packet size must be a multiple of 4 since FIFO Data Word + * Register allows only full-word access according the Reference + * Manual; + * - the physical address of the device on LPB and the packet size + * must be aligned on BPT (bytes per transaction) or 8-bytes + * boundary according the Reference Manual; + * - but we choose DMA maxburst equal (or very close to) BPT to prevent + * DMA controller from overtaking FIFO and causing FIFO underflow + * error. So we force the packet size to be aligned on BPT boundary + * not to confuse DMA driver which requires the packet size to be + * aligned on maxburst boundary; + * - BPT should be set to the LPB device port size for operation with + * disabled auto-incrementing according Reference Manual. + */ + if (lpbfifo.req->size == 0 || !IS_ALIGNED(lpbfifo.req->size, 4)) + return -EINVAL; + + if (lpbfifo.req->portsize != LPB_DEV_PORTSIZE_UNDEFINED) { + bpt = lpbfifo.req->portsize; + no_incr = true; + } + + while (bpt > 1) { + if (IS_ALIGNED(lpbfifo.req->dev_phys_addr, min(bpt, 0x8u)) && + IS_ALIGNED(lpbfifo.req->size, bpt)) { + break; + } + + if (no_incr) + return -EINVAL; + + bpt >>= 1; + } + dma_conf.dst_maxburst = max(bpt, 0x4u) / 4; + dma_conf.src_maxburst = max(bpt, 0x4u) / 4; + + for (i = 0; i < lpbfifo.cs_n; i++) { + phys_addr_t cs_start = lpbfifo.cs_ranges[i].addr; + phys_addr_t cs_end = cs_start + lpbfifo.cs_ranges[i].size; + phys_addr_t access_start = lpbfifo.req->dev_phys_addr; + phys_addr_t access_end = access_start + lpbfifo.req->size; + + if (access_start >= cs_start && access_end <= cs_end) { + cs = lpbfifo.cs_ranges[i].csnum; + break; + } + } + if (i == lpbfifo.cs_n) + return -EFAULT; + + /* 2. Prepare DMA */ + dma_dev = lpbfifo.chan->device; + + if (lpbfifo.req->dir == MPC512X_LPBFIFO_REQ_DIR_WRITE) { + dir = DMA_TO_DEVICE; + dma_conf.direction = DMA_MEM_TO_DEV; + dma_conf.dst_addr = lpbfifo.regs_phys + + offsetof(struct mpc512x_lpbfifo, data_word); + } else { + dir = DMA_FROM_DEVICE; + dma_conf.direction = DMA_DEV_TO_MEM; + dma_conf.src_addr = lpbfifo.regs_phys + + offsetof(struct mpc512x_lpbfifo, data_word); + } + dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + + /* Make DMA channel work with LPB FIFO data register */ + if (dma_dev->device_config(lpbfifo.chan, &dma_conf)) { + ret = -EINVAL; + goto err_dma_prep; + } + + sg_init_table(&sg, 1); + + sg_dma_address(&sg) = dma_map_single(dma_dev->dev, + lpbfifo.req->ram_virt_addr, lpbfifo.req->size, dir); + if (dma_mapping_error(dma_dev->dev, sg_dma_address(&sg))) + return -EFAULT; + + lpbfifo.ram_bus_addr = sg_dma_address(&sg); /* For freeing later */ + + sg_dma_len(&sg) = lpbfifo.req->size; + + dma_tx = dmaengine_prep_slave_sg(lpbfifo.chan, &sg, + 1, dma_conf.direction, 0); + if (!dma_tx) { + ret = -ENOSPC; + goto err_dma_prep; + } + dma_tx->callback = mpc512x_lpbfifo_callback; + dma_tx->callback_param = NULL; + + /* 3. Prepare FIFO */ + out_be32(&lpbfifo.regs->enable, + MPC512X_SCLPC_RESET | MPC512X_SCLPC_FIFO_RESET); + out_be32(&lpbfifo.regs->enable, 0x0); + + /* + * Configure the watermarks for write operation (RAM->DMA->FIFO->dev): + * - high watermark 7 words according the Reference Manual, + * - low watermark 512 bytes (half of the FIFO). + * These watermarks don't work for read operation since the + * MPC512X_SCLPC_FLUSH bit is set (according the Reference Manual). + */ + out_be32(&lpbfifo.regs->fifo_ctrl, MPC512X_SCLPC_FIFO_CTRL(0x7)); + out_be32(&lpbfifo.regs->fifo_alarm, MPC512X_SCLPC_FIFO_ALARM(0x200)); + + /* + * Start address is a physical address of the region which belongs + * to the device on the LocalPlus Bus + */ + out_be32(&lpbfifo.regs->start_addr, lpbfifo.req->dev_phys_addr); + + /* + * Configure chip select, transfer direction, address increment option + * and bytes per transaction option + */ + bits = MPC512X_SCLPC_CS(cs); + if (lpbfifo.req->dir == MPC512X_LPBFIFO_REQ_DIR_READ) + bits |= MPC512X_SCLPC_READ | MPC512X_SCLPC_FLUSH; + if (no_incr) + bits |= MPC512X_SCLPC_DAI; + bits |= MPC512X_SCLPC_BPT(bpt); + out_be32(&lpbfifo.regs->ctrl, bits); + + /* Unmask irqs */ + bits = MPC512X_SCLPC_ENABLE | MPC512X_SCLPC_ABORT_INT_ENABLE; + if (lpbfifo.req->dir == MPC512X_LPBFIFO_REQ_DIR_WRITE) + bits |= MPC512X_SCLPC_NORM_INT_ENABLE; + else + lpbfifo.wait_lpbfifo_irq = false; + + out_be32(&lpbfifo.regs->enable, bits); + + /* 4. Set packet size and kick FIFO off */ + bits = lpbfifo.req->size | MPC512X_SCLPC_START; + out_be32(&lpbfifo.regs->pkt_size, bits); + + /* 5. Finally kick DMA off */ + cookie = dma_tx->tx_submit(dma_tx); + if (dma_submit_error(cookie)) { + ret = -ENOSPC; + goto err_dma_submit; + } + + return 0; + + err_dma_submit: + out_be32(&lpbfifo.regs->enable, + MPC512X_SCLPC_RESET | MPC512X_SCLPC_FIFO_RESET); + err_dma_prep: + dma_unmap_single(dma_dev->dev, sg_dma_address(&sg), + lpbfifo.req->size, dir); + return ret; +} + +static int mpc512x_lpbfifo_submit_locked(struct mpc512x_lpbfifo_request *req) +{ + int ret = 0; + + if (!lpbfifo.regs) + return -ENODEV; + + /* Check whether a transfer is in progress */ + if (lpbfifo.req) + return -EBUSY; + + lpbfifo.wait_lpbfifo_irq = true; + lpbfifo.wait_lpbfifo_callback = true; + lpbfifo.req = req; + + ret = mpc512x_lpbfifo_kick(); + if (ret != 0) + lpbfifo.req = NULL; /* Set the FIFO as idle */ + + return ret; +} + +int mpc512x_lpbfifo_submit(struct mpc512x_lpbfifo_request *req) +{ + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&lpbfifo.lock, flags); + ret = mpc512x_lpbfifo_submit_locked(req); + spin_unlock_irqrestore(&lpbfifo.lock, flags); + + return ret; +} +EXPORT_SYMBOL(mpc512x_lpbfifo_submit); + +/* + * LPBFIFO driver uses "ranges" property of "localbus" device tree node + * for being able to determine the chip select number of a client device + * ordering a DMA transfer. + */ +static int get_cs_ranges(struct device *dev) +{ + int ret = -ENODEV; + struct device_node *lb_node; + const u32 *addr_cells_p; + const u32 *size_cells_p; + int proplen; + size_t i; + + lb_node = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-localbus"); + if (!lb_node) + return ret; + + /* + * The node defined as compatible with 'fsl,mpc5121-localbus' + * should have two address cells and one size cell. + * Every item of its ranges property should consist of: + * - the first address cell which is the chipselect number; + * - the second address cell which is the offset in the chipselect, + * must be zero. + * - CPU address of the beginning of an access window; + * - the only size cell which is the size of an access window. + */ + addr_cells_p = of_get_property(lb_node, "#address-cells", NULL); + size_cells_p = of_get_property(lb_node, "#size-cells", NULL); + if (addr_cells_p == NULL || *addr_cells_p != 2 || + size_cells_p == NULL || *size_cells_p != 1) { + goto end; + } + + proplen = of_property_count_u32_elems(lb_node, "ranges"); + if (proplen <= 0 || proplen % 4 != 0) + goto end; + + lpbfifo.cs_n = proplen / 4; + lpbfifo.cs_ranges = devm_kcalloc(dev, lpbfifo.cs_n, + sizeof(struct cs_range), GFP_KERNEL); + if (!lpbfifo.cs_ranges) + goto end; + + if (of_property_read_u32_array(lb_node, "ranges", + (u32 *)lpbfifo.cs_ranges, proplen) != 0) { + goto end; + } + + for (i = 0; i < lpbfifo.cs_n; i++) { + if (lpbfifo.cs_ranges[i].base != 0) + goto end; + } + + ret = 0; + + end: + of_node_put(lb_node); + return ret; +} + +static int mpc512x_lpbfifo_probe(struct platform_device *pdev) +{ + struct resource r; + int ret = 0; + + memset(&lpbfifo, 0, sizeof(struct lpbfifo_data)); + spin_lock_init(&lpbfifo.lock); + + lpbfifo.chan = dma_request_slave_channel(&pdev->dev, "rx-tx"); + if (lpbfifo.chan == NULL) + return -EPROBE_DEFER; + + if (of_address_to_resource(pdev->dev.of_node, 0, &r) != 0) { + dev_err(&pdev->dev, "bad 'reg' in 'sclpc' device tree node\n"); + ret = -ENODEV; + goto err0; + } + + lpbfifo.regs_phys = r.start; + lpbfifo.regs_size = resource_size(&r); + + if (!devm_request_mem_region(&pdev->dev, lpbfifo.regs_phys, + lpbfifo.regs_size, DRV_NAME)) { + dev_err(&pdev->dev, "unable to request region\n"); + ret = -EBUSY; + goto err0; + } + + lpbfifo.regs = devm_ioremap(&pdev->dev, + lpbfifo.regs_phys, lpbfifo.regs_size); + if (!lpbfifo.regs) { + dev_err(&pdev->dev, "mapping registers failed\n"); + ret = -ENOMEM; + goto err0; + } + + out_be32(&lpbfifo.regs->enable, + MPC512X_SCLPC_RESET | MPC512X_SCLPC_FIFO_RESET); + + if (get_cs_ranges(&pdev->dev) != 0) { + dev_err(&pdev->dev, "bad '/localbus' device tree node\n"); + ret = -ENODEV; + goto err0; + } + + lpbfifo.irq = irq_of_parse_and_map(pdev->dev.of_node, 0); + if (lpbfifo.irq == NO_IRQ) { + dev_err(&pdev->dev, "mapping irq failed\n"); + ret = -ENODEV; + goto err0; + } + + if (request_irq(lpbfifo.irq, mpc512x_lpbfifo_irq, 0, + DRV_NAME, &pdev->dev) != 0) { + dev_err(&pdev->dev, "requesting irq failed\n"); + ret = -ENODEV; + goto err1; + } + + dev_info(&pdev->dev, "probe succeeded\n"); + return 0; + + err1: + irq_dispose_mapping(lpbfifo.irq); + err0: + dma_release_channel(lpbfifo.chan); + return ret; +} + +static int mpc512x_lpbfifo_remove(struct platform_device *pdev) +{ + unsigned long flags; + struct dma_device *dma_dev = lpbfifo.chan->device; + struct mpc512x_lpbfifo __iomem *regs = NULL; + + spin_lock_irqsave(&lpbfifo.lock, flags); + regs = lpbfifo.regs; + lpbfifo.regs = NULL; + spin_unlock_irqrestore(&lpbfifo.lock, flags); + + dma_dev->device_terminate_all(lpbfifo.chan); + out_be32(®s->enable, MPC512X_SCLPC_RESET | MPC512X_SCLPC_FIFO_RESET); + + free_irq(lpbfifo.irq, &pdev->dev); + irq_dispose_mapping(lpbfifo.irq); + dma_release_channel(lpbfifo.chan); + + return 0; +} + +static const struct of_device_id mpc512x_lpbfifo_match[] = { + { .compatible = "fsl,mpc512x-lpbfifo", }, + {}, +}; +MODULE_DEVICE_TABLE(of, mpc512x_lpbfifo_match); + +static struct platform_driver mpc512x_lpbfifo_driver = { + .probe = mpc512x_lpbfifo_probe, + .remove = mpc512x_lpbfifo_remove, + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + .of_match_table = mpc512x_lpbfifo_match, + }, +}; + +module_platform_driver(mpc512x_lpbfifo_driver); + +MODULE_AUTHOR("Alexander Popov <alex.popov@linux.com>"); +MODULE_DESCRIPTION("MPC512x LocalPlus Bus FIFO device driver"); +MODULE_LICENSE("GPL v2"); diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c index 78ac19aefa4d..3048e34db6d8 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c @@ -724,7 +724,7 @@ static int mpc52xx_gpt_probe(struct platform_device *ofdev) { struct mpc52xx_gpt_priv *gpt; - gpt = kzalloc(sizeof *gpt, GFP_KERNEL); + gpt = devm_kzalloc(&ofdev->dev, sizeof *gpt, GFP_KERNEL); if (!gpt) return -ENOMEM; @@ -732,10 +732,8 @@ static int mpc52xx_gpt_probe(struct platform_device *ofdev) gpt->dev = &ofdev->dev; gpt->ipb_freq = mpc5xxx_get_bus_frequency(ofdev->dev.of_node); gpt->regs = of_iomap(ofdev->dev.of_node, 0); - if (!gpt->regs) { - kfree(gpt); + if (!gpt->regs) return -ENOMEM; - } dev_set_drvdata(&ofdev->dev, gpt); diff --git a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c index 251dcb90ef34..7bb42a0100de 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c @@ -568,6 +568,7 @@ static const struct of_device_id mpc52xx_lpbfifo_match[] = { { .compatible = "fsl,mpc5200-lpbfifo", }, {}, }; +MODULE_DEVICE_TABLE(of, mpc52xx_lpbfifo_match); static struct platform_driver mpc52xx_lpbfifo_driver = { .driver = { diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c index b39557120cbb..46d05c94add6 100644 --- a/arch/powerpc/platforms/85xx/corenet_generic.c +++ b/arch/powerpc/platforms/85xx/corenet_generic.c @@ -161,6 +161,7 @@ static const char * const boards[] __initconst = { "fsl,T1042RDB", "fsl,T1042RDB_PI", "keymile,kmcoge4", + "varisys,CYRUS", NULL }; @@ -214,7 +215,17 @@ define_machine(corenet_generic) { .pcibios_fixup_bus = fsl_pcibios_fixup_bus, .pcibios_fixup_phb = fsl_pcibios_fixup_phb, #endif +/* + * Core reset may cause issues if using the proxy mode of MPIC. + * So, use the mixed mode of MPIC if enabling CPU hotplug. + * + * Likewise, problems have been seen with kexec when coreint is enabled. + */ +#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_KEXEC) + .get_irq = mpic_get_irq, +#else .get_irq = mpic_get_coreint_irq, +#endif .restart = fsl_rstcr_restart, .calibrate_decr = generic_calibrate_decr, .progress = udbg_progress, diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index a392e94a07fa..f0be439ceaaa 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -34,6 +34,7 @@ #include <linux/of_device.h> #include <linux/phy.h> #include <linux/memblock.h> +#include <linux/fsl/guts.h> #include <linux/atomic.h> #include <asm/time.h> @@ -51,7 +52,6 @@ #include <asm/qe_ic.h> #include <asm/mpic.h> #include <asm/swiotlb.h> -#include <asm/fsl_guts.h> #include "smp.h" #include "mpc85xx.h" diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c index e358bed66d01..50dcc00a0f5a 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c @@ -17,6 +17,7 @@ #include <linux/seq_file.h> #include <linux/interrupt.h> #include <linux/of_platform.h> +#include <linux/fsl/guts.h> #include <asm/time.h> #include <asm/machdep.h> @@ -27,7 +28,6 @@ #include <asm/mpic.h> #include <asm/qe.h> #include <asm/qe_ic.h> -#include <asm/fsl_guts.h> #include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c index 6ac986d3f8a3..371df822e88e 100644 --- a/arch/powerpc/platforms/85xx/p1022_ds.c +++ b/arch/powerpc/platforms/85xx/p1022_ds.c @@ -16,6 +16,7 @@ * kind, whether express or implied. */ +#include <linux/fsl/guts.h> #include <linux/pci.h> #include <linux/of_platform.h> #include <asm/div64.h> @@ -25,7 +26,6 @@ #include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> #include <asm/udbg.h> -#include <asm/fsl_guts.h> #include <asm/fsl_lbc.h> #include "smp.h" diff --git a/arch/powerpc/platforms/85xx/p1022_rdk.c b/arch/powerpc/platforms/85xx/p1022_rdk.c index 680232d6ba48..5087becaa8bc 100644 --- a/arch/powerpc/platforms/85xx/p1022_rdk.c +++ b/arch/powerpc/platforms/85xx/p1022_rdk.c @@ -12,6 +12,7 @@ * kind, whether express or implied. */ +#include <linux/fsl/guts.h> #include <linux/pci.h> #include <linux/of_platform.h> #include <asm/div64.h> @@ -21,7 +22,6 @@ #include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> #include <asm/udbg.h> -#include <asm/fsl_guts.h> #include "smp.h" #include "mpc85xx.h" diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c index b8b821697910..6b107cea1c08 100644 --- a/arch/powerpc/platforms/85xx/smp.c +++ b/arch/powerpc/platforms/85xx/smp.c @@ -19,6 +19,7 @@ #include <linux/kexec.h> #include <linux/highmem.h> #include <linux/cpu.h> +#include <linux/fsl/guts.h> #include <asm/machdep.h> #include <asm/pgtable.h> @@ -26,7 +27,6 @@ #include <asm/mpic.h> #include <asm/cacheflush.h> #include <asm/dbell.h> -#include <asm/fsl_guts.h> #include <asm/code-patching.h> #include <asm/cputhreads.h> @@ -173,15 +173,22 @@ static inline u32 read_spin_table_addr_l(void *spin_table) static void wake_hw_thread(void *info) { void fsl_secondary_thread_init(void); - unsigned long imsr1, inia1; + unsigned long imsr, inia; int nr = *(const int *)info; - imsr1 = MSR_KERNEL; - inia1 = *(unsigned long *)fsl_secondary_thread_init; - - mttmr(TMRN_IMSR1, imsr1); - mttmr(TMRN_INIA1, inia1); - mtspr(SPRN_TENS, TEN_THREAD(1)); + imsr = MSR_KERNEL; + inia = *(unsigned long *)fsl_secondary_thread_init; + + if (cpu_thread_in_core(nr) == 0) { + /* For when we boot on a secondary thread with kdump */ + mttmr(TMRN_IMSR0, imsr); + mttmr(TMRN_INIA0, inia); + mtspr(SPRN_TENS, TEN_THREAD(0)); + } else { + mttmr(TMRN_IMSR1, imsr); + mttmr(TMRN_INIA1, inia); + mtspr(SPRN_TENS, TEN_THREAD(1)); + } smp_generic_kick_cpu(nr); } @@ -224,6 +231,12 @@ static int smp_85xx_kick_cpu(int nr) smp_call_function_single(primary, wake_hw_thread, &nr, 0); return 0; + } else if (cpu_thread_in_core(boot_cpuid) != 0 && + cpu_first_thread_sibling(boot_cpuid) == nr) { + if (WARN_ON_ONCE(!cpu_has_feature(CPU_FTR_SMT))) + return -ENOENT; + + smp_call_function_single(boot_cpuid, wake_hw_thread, &nr, 0); } #endif @@ -331,13 +344,14 @@ struct smp_ops_t smp_85xx_ops = { .cpu_disable = generic_cpu_disable, .cpu_die = generic_cpu_die, #endif -#ifdef CONFIG_KEXEC +#if defined(CONFIG_KEXEC) && !defined(CONFIG_PPC64) .give_timebase = smp_generic_give_timebase, .take_timebase = smp_generic_take_timebase, #endif }; #ifdef CONFIG_KEXEC +#ifdef CONFIG_PPC32 atomic_t kexec_down_cpus = ATOMIC_INIT(0); void mpc85xx_smp_kexec_cpu_down(int crash_shutdown, int secondary) @@ -357,9 +371,64 @@ static void mpc85xx_smp_kexec_down(void *arg) if (ppc_md.kexec_cpu_down) ppc_md.kexec_cpu_down(0,1); } +#else +void mpc85xx_smp_kexec_cpu_down(int crash_shutdown, int secondary) +{ + int cpu = smp_processor_id(); + int sibling = cpu_last_thread_sibling(cpu); + bool notified = false; + int disable_cpu; + int disable_threadbit = 0; + long start = mftb(); + long now; + + local_irq_disable(); + hard_irq_disable(); + mpic_teardown_this_cpu(secondary); + + if (cpu == crashing_cpu && cpu_thread_in_core(cpu) != 0) { + /* + * We enter the crash kernel on whatever cpu crashed, + * even if it's a secondary thread. If that's the case, + * disable the corresponding primary thread. + */ + disable_threadbit = 1; + disable_cpu = cpu_first_thread_sibling(cpu); + } else if (sibling != crashing_cpu && + cpu_thread_in_core(cpu) == 0 && + cpu_thread_in_core(sibling) != 0) { + disable_threadbit = 2; + disable_cpu = sibling; + } + + if (disable_threadbit) { + while (paca[disable_cpu].kexec_state < KEXEC_STATE_REAL_MODE) { + barrier(); + now = mftb(); + if (!notified && now - start > 1000000) { + pr_info("%s/%d: waiting for cpu %d to enter KEXEC_STATE_REAL_MODE (%d)\n", + __func__, smp_processor_id(), + disable_cpu, + paca[disable_cpu].kexec_state); + notified = true; + } + } + + if (notified) { + pr_info("%s: cpu %d done waiting\n", + __func__, disable_cpu); + } + + mtspr(SPRN_TENC, disable_threadbit); + while (mfspr(SPRN_TENSR) & disable_threadbit) + cpu_relax(); + } +} +#endif static void mpc85xx_smp_machine_kexec(struct kimage *image) { +#ifdef CONFIG_PPC32 int timeout = INT_MAX; int i, num_cpus = num_present_cpus(); @@ -380,6 +449,7 @@ static void mpc85xx_smp_machine_kexec(struct kimage *image) if ( i == smp_processor_id() ) continue; mpic_reset_core(i); } +#endif default_machine_kexec(image); } diff --git a/arch/powerpc/platforms/85xx/twr_p102x.c b/arch/powerpc/platforms/85xx/twr_p102x.c index 30e002f4648c..892e613519cc 100644 --- a/arch/powerpc/platforms/85xx/twr_p102x.c +++ b/arch/powerpc/platforms/85xx/twr_p102x.c @@ -15,6 +15,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/errno.h> +#include <linux/fsl/guts.h> #include <linux/pci.h> #include <linux/of_platform.h> @@ -23,7 +24,6 @@ #include <asm/mpic.h> #include <asm/qe.h> #include <asm/qe_ic.h> -#include <asm/fsl_guts.h> #include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c index 55413a547ea8..437a9c372ae1 100644 --- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c +++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c @@ -24,6 +24,7 @@ #include <linux/delay.h> #include <linux/seq_file.h> #include <linux/of.h> +#include <linux/fsl/guts.h> #include <asm/time.h> #include <asm/machdep.h> @@ -38,7 +39,6 @@ #include <sysdev/fsl_pci.h> #include <sysdev/fsl_soc.h> #include <sysdev/simple_gpio.h> -#include <asm/fsl_guts.h> #include "mpc86xx.h" diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index c140e94c7c72..142dff5e96d6 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -147,17 +147,6 @@ config 6xx depends on PPC32 && PPC_BOOK3S select PPC_HAVE_PMU_SUPPORT -config TUNE_CELL - bool "Optimize for Cell Broadband Engine" - depends on PPC64 && PPC_BOOK3S - help - Cause the compiler to optimize for the PPE of the Cell Broadband - Engine. This will make the code run considerably faster on Cell - but somewhat slower on other machines. This option only changes - the scheduling of instructions, not the selection of instructions - itself, so the resulting kernel will keep running on all other - machines. - # this is temp to handle compat with arch=ppc config 8xx bool diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig index b0ac1773cea6..429fc59d2a47 100644 --- a/arch/powerpc/platforms/cell/Kconfig +++ b/arch/powerpc/platforms/cell/Kconfig @@ -25,7 +25,7 @@ config PPC_CELL_NATIVE config PPC_IBM_CELL_BLADE bool "IBM Cell Blade" - depends on PPC64 && PPC_BOOK3S + depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN select PPC_CELL_NATIVE select PPC_OF_PLATFORM_PCI select PCI @@ -35,7 +35,7 @@ config PPC_IBM_CELL_BLADE config PPC_CELL_QPACE bool "IBM Cell - QPACE" - depends on PPC64 && PPC_BOOK3S + depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN select PPC_CELL_COMMON config AXON_MSI diff --git a/arch/powerpc/platforms/maple/Kconfig b/arch/powerpc/platforms/maple/Kconfig index 1ea621a94c3b..e359d0db092c 100644 --- a/arch/powerpc/platforms/maple/Kconfig +++ b/arch/powerpc/platforms/maple/Kconfig @@ -1,5 +1,5 @@ config PPC_MAPLE - depends on PPC64 && PPC_BOOK3S + depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN bool "Maple 970FX Evaluation Board" select PCI select MPIC diff --git a/arch/powerpc/platforms/pasemi/Kconfig b/arch/powerpc/platforms/pasemi/Kconfig index a2aeb327d185..00d4b28cbb60 100644 --- a/arch/powerpc/platforms/pasemi/Kconfig +++ b/arch/powerpc/platforms/pasemi/Kconfig @@ -1,5 +1,5 @@ config PPC_PASEMI - depends on PPC64 && PPC_BOOK3S + depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN bool "PA Semi SoC-based platforms" default n select MPIC diff --git a/arch/powerpc/platforms/powermac/Kconfig b/arch/powerpc/platforms/powermac/Kconfig index 607124bae2e7..43c606268baf 100644 --- a/arch/powerpc/platforms/powermac/Kconfig +++ b/arch/powerpc/platforms/powermac/Kconfig @@ -1,6 +1,6 @@ config PPC_PMAC bool "Apple PowerMac based machines" - depends on PPC_BOOK3S + depends on PPC_BOOK3S && CPU_BIG_ENDIAN select MPIC select PCI select PPC_INDIRECT_PCI if PPC32 diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c index 3bb6acb76339..e1c90725522a 100644 --- a/arch/powerpc/platforms/powernv/eeh-powernv.c +++ b/arch/powerpc/platforms/powernv/eeh-powernv.c @@ -43,17 +43,11 @@ static bool pnv_eeh_nb_init = false; static int eeh_event_irq = -EINVAL; -/** - * pnv_eeh_init - EEH platform dependent initialization - * - * EEH platform dependent initialization on powernv - */ static int pnv_eeh_init(void) { struct pci_controller *hose; struct pnv_phb *phb; - /* We require OPALv3 */ if (!firmware_has_feature(FW_FEATURE_OPALv3)) { pr_warn("%s: OPALv3 is required !\n", __func__); @@ -77,9 +71,9 @@ static int pnv_eeh_init(void) /* * PE#0 should be regarded as valid by EEH core * if it's not the reserved one. Currently, we - * have the reserved PE#0 and PE#127 for PHB3 + * have the reserved PE#255 and PE#127 for PHB3 * and P7IOC separately. So we should regard - * PE#0 as valid for P7IOC. + * PE#0 as valid for PHB3 and P7IOC. */ if (phb->ioda.reserved_pe != 0) eeh_add_flag(EEH_VALID_PE_ZERO); @@ -284,33 +278,23 @@ static int pnv_eeh_post_init(void) #endif /* CONFIG_DEBUG_FS */ } - return ret; } -static int pnv_eeh_cap_start(struct pci_dn *pdn) +static int pnv_eeh_find_cap(struct pci_dn *pdn, int cap) { - u32 status; + int pos = PCI_CAPABILITY_LIST; + int cnt = 48; /* Maximal number of capabilities */ + u32 status, id; if (!pdn) return 0; + /* Check if the device supports capabilities */ pnv_pci_cfg_read(pdn, PCI_STATUS, 2, &status); if (!(status & PCI_STATUS_CAP_LIST)) return 0; - return PCI_CAPABILITY_LIST; -} - -static int pnv_eeh_find_cap(struct pci_dn *pdn, int cap) -{ - int pos = pnv_eeh_cap_start(pdn); - int cnt = 48; /* Maximal number of capabilities */ - u32 id; - - if (!pos) - return 0; - while (cnt--) { pnv_pci_cfg_read(pdn, pos, 1, &pos); if (pos < 0x40) @@ -443,11 +427,14 @@ static void *pnv_eeh_probe(struct pci_dn *pdn, void *data) * that PE to block its config space. * * Broadcom Austin 4-ports NICs (14e4:1657) + * Broadcom Shiner 4-ports 1G NICs (14e4:168a) * Broadcom Shiner 2-ports 10G NICs (14e4:168e) */ if ((pdn->vendor_id == PCI_VENDOR_ID_BROADCOM && pdn->device_id == 0x1657) || (pdn->vendor_id == PCI_VENDOR_ID_BROADCOM && + pdn->device_id == 0x168a) || + (pdn->vendor_id == PCI_VENDOR_ID_BROADCOM && pdn->device_id == 0x168e)) edev->pe->state |= EEH_PE_CFG_RESTRICTED; @@ -487,10 +474,9 @@ static int pnv_eeh_set_option(struct eeh_pe *pe, int option) struct pci_controller *hose = pe->phb; struct pnv_phb *phb = hose->private_data; bool freeze_pe = false; - int opt, ret = 0; + int opt; s64 rc; - /* Sanity check on option */ switch (option) { case EEH_OPT_DISABLE: return -EPERM; @@ -511,38 +497,37 @@ static int pnv_eeh_set_option(struct eeh_pe *pe, int option) return -EINVAL; } - /* If PHB supports compound PE, to handle it */ + /* Freeze master and slave PEs if PHB supports compound PEs */ if (freeze_pe) { if (phb->freeze_pe) { phb->freeze_pe(phb, pe->addr); - } else { - rc = opal_pci_eeh_freeze_set(phb->opal_id, - pe->addr, opt); - if (rc != OPAL_SUCCESS) { - pr_warn("%s: Failure %lld freezing " - "PHB#%x-PE#%x\n", - __func__, rc, - phb->hose->global_number, pe->addr); - ret = -EIO; - } + return 0; } - } else { - if (phb->unfreeze_pe) { - ret = phb->unfreeze_pe(phb, pe->addr, opt); - } else { - rc = opal_pci_eeh_freeze_clear(phb->opal_id, - pe->addr, opt); - if (rc != OPAL_SUCCESS) { - pr_warn("%s: Failure %lld enable %d " - "for PHB#%x-PE#%x\n", - __func__, rc, option, - phb->hose->global_number, pe->addr); - ret = -EIO; - } + + rc = opal_pci_eeh_freeze_set(phb->opal_id, pe->addr, opt); + if (rc != OPAL_SUCCESS) { + pr_warn("%s: Failure %lld freezing PHB#%x-PE#%x\n", + __func__, rc, phb->hose->global_number, + pe->addr); + return -EIO; } + + return 0; } - return ret; + /* Unfreeze master and slave PEs if PHB supports */ + if (phb->unfreeze_pe) + return phb->unfreeze_pe(phb, pe->addr, opt); + + rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe->addr, opt); + if (rc != OPAL_SUCCESS) { + pr_warn("%s: Failure %lld enable %d for PHB#%x-PE#%x\n", + __func__, rc, option, phb->hose->global_number, + pe->addr); + return -EIO; + } + + return 0; } /** @@ -1065,7 +1050,6 @@ static int pnv_eeh_err_inject(struct eeh_pe *pe, int type, int func, struct pnv_phb *phb = hose->private_data; s64 rc; - /* Sanity check on error type */ if (type != OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR && type != OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR64) { pr_warn("%s: Invalid error type %d\n", diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c index 685b3cbe1362..a9a8fa37a555 100644 --- a/arch/powerpc/platforms/powernv/setup.c +++ b/arch/powerpc/platforms/powernv/setup.c @@ -187,7 +187,7 @@ static void pnv_kexec_wait_secondaries_down(void) for_each_online_cpu(i) { uint8_t status; - int64_t rc; + int64_t rc, timeout = 1000; if (i == my_cpu) continue; @@ -204,6 +204,18 @@ static void pnv_kexec_wait_secondaries_down(void) i, paca[i].hw_cpu_id); notified = i; } + + /* + * On crash secondaries might be unreachable or hung, + * so timeout if we've waited too long + * */ + mdelay(1); + if (timeout-- == 0) { + printk(KERN_ERR "kexec: timed out waiting for " + "cpu %d (physical %d) to enter OPAL\n", + i, paca[i].hw_cpu_id); + break; + } } } } @@ -225,13 +237,6 @@ static void pnv_kexec_cpu_down(int crash_shutdown, int secondary) /* Return the CPU to OPAL */ opal_return_cpu(); - } else if (crash_shutdown) { - /* - * On crash, we don't wait for secondaries to go - * down as they might be unreachable or hung, so - * instead we just wait a bit and move on. - */ - mdelay(1); } else { /* Primary waits for the secondaries to have reached OPAL */ pnv_kexec_wait_secondaries_down(); diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig index 56f274064d6c..b27f40f26efc 100644 --- a/arch/powerpc/platforms/ps3/Kconfig +++ b/arch/powerpc/platforms/ps3/Kconfig @@ -1,6 +1,6 @@ config PPC_PS3 bool "Sony PS3" - depends on PPC64 && PPC_BOOK3S + depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN select PPC_CELL select USB_OHCI_LITTLE_ENDIAN select USB_OHCI_BIG_ENDIAN_MMIO diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index 54c87d5d349d..bec90fb30425 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -4,6 +4,7 @@ config PPC_PSERIES select HAVE_PCSPKR_PLATFORM select MPIC select OF_DYNAMIC + select PCI select PCI_MSI select PPC_XICS select PPC_ICP_NATIVE @@ -15,7 +16,6 @@ config PPC_PSERIES select RTAS_ERROR_LOGGING select PPC_UDBG_16550 select PPC_NATIVE - select PPC_PCI_CHOICE if EXPERT select PPC_DOORBELL select HAVE_CONTEXT_TRACKING select HOTPLUG_CPU if SMP @@ -43,11 +43,6 @@ config DTL Say N if you are unsure. -config PSERIES_MSI - bool - depends on PCI_MSI && PPC_PSERIES && EEH - default y - config PSERIES_ENERGY tristate "pSeries energy management capabilities driver" depends on PPC_PSERIES diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index 03480796af9a..fedc2ccf029d 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -2,14 +2,13 @@ ccflags-$(CONFIG_PPC64) := $(NO_MINIMAL_TOC) ccflags-$(CONFIG_PPC_PSERIES_DEBUG) += -DDEBUG obj-y := lpar.o hvCall.o nvram.o reconfig.o \ + of_helpers.o \ setup.o iommu.o event_sources.o ras.o \ - firmware.o power.o dlpar.o mobility.o rng.o + firmware.o power.o dlpar.o mobility.o rng.o \ + pci.o pci_dlpar.o eeh_pseries.o msi.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_SCANLOG) += scanlog.o -obj-$(CONFIG_EEH) += eeh_pseries.o obj-$(CONFIG_KEXEC) += kexec.o -obj-$(CONFIG_PCI) += pci.o pci_dlpar.o -obj-$(CONFIG_PSERIES_MSI) += msi.o obj-$(CONFIG_PSERIES_ENERGY) += pseries_energy.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug-cpu.o diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c index db17827eb746..f244dcb4f2cf 100644 --- a/arch/powerpc/platforms/pseries/dlpar.c +++ b/arch/powerpc/platforms/pseries/dlpar.c @@ -18,6 +18,8 @@ #include <linux/cpu.h> #include <linux/slab.h> #include <linux/of.h> + +#include "of_helpers.h" #include "offline_states.h" #include "pseries.h" @@ -244,36 +246,13 @@ cc_error: return first_dn; } -static struct device_node *derive_parent(const char *path) -{ - struct device_node *parent; - char *last_slash; - - last_slash = strrchr(path, '/'); - if (last_slash == path) { - parent = of_find_node_by_path("/"); - } else { - char *parent_path; - int parent_path_len = last_slash - path + 1; - parent_path = kmalloc(parent_path_len, GFP_KERNEL); - if (!parent_path) - return NULL; - - strlcpy(parent_path, path, parent_path_len); - parent = of_find_node_by_path(parent_path); - kfree(parent_path); - } - - return parent; -} - int dlpar_attach_node(struct device_node *dn) { int rc; - dn->parent = derive_parent(dn->full_name); - if (!dn->parent) - return -ENOMEM; + dn->parent = pseries_of_derive_parent(dn->full_name); + if (IS_ERR(dn->parent)) + return PTR_ERR(dn->parent); rc = of_attach_node(dn); if (rc) { diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c index 1ba55d0bb449..ac3ffd97e059 100644 --- a/arch/powerpc/platforms/pseries/eeh_pseries.c +++ b/arch/powerpc/platforms/pseries/eeh_pseries.c @@ -433,42 +433,34 @@ static int pseries_eeh_get_state(struct eeh_pe *pe, int *state) return ret; /* Parse the result out */ - result = 0; - if (rets[1]) { - switch(rets[0]) { - case 0: - result &= ~EEH_STATE_RESET_ACTIVE; - result |= EEH_STATE_MMIO_ACTIVE; - result |= EEH_STATE_DMA_ACTIVE; - break; - case 1: - result |= EEH_STATE_RESET_ACTIVE; - result |= EEH_STATE_MMIO_ACTIVE; - result |= EEH_STATE_DMA_ACTIVE; - break; - case 2: - result &= ~EEH_STATE_RESET_ACTIVE; - result &= ~EEH_STATE_MMIO_ACTIVE; - result &= ~EEH_STATE_DMA_ACTIVE; - break; - case 4: - result &= ~EEH_STATE_RESET_ACTIVE; - result &= ~EEH_STATE_MMIO_ACTIVE; - result &= ~EEH_STATE_DMA_ACTIVE; - result |= EEH_STATE_MMIO_ENABLED; - break; - case 5: - if (rets[2]) { - if (state) *state = rets[2]; - result = EEH_STATE_UNAVAILABLE; - } else { - result = EEH_STATE_NOT_SUPPORT; - } - break; - default: + if (!rets[1]) + return EEH_STATE_NOT_SUPPORT; + + switch(rets[0]) { + case 0: + result = EEH_STATE_MMIO_ACTIVE | + EEH_STATE_DMA_ACTIVE; + break; + case 1: + result = EEH_STATE_RESET_ACTIVE | + EEH_STATE_MMIO_ACTIVE | + EEH_STATE_DMA_ACTIVE; + break; + case 2: + result = 0; + break; + case 4: + result = EEH_STATE_MMIO_ENABLED; + break; + case 5: + if (rets[2]) { + if (state) *state = rets[2]; + result = EEH_STATE_UNAVAILABLE; + } else { result = EEH_STATE_NOT_SUPPORT; } - } else { + break; + default: result = EEH_STATE_NOT_SUPPORT; } diff --git a/arch/powerpc/platforms/pseries/hvcserver.c b/arch/powerpc/platforms/pseries/hvcserver.c index eedb64594dc5..94a6e5612b0d 100644 --- a/arch/powerpc/platforms/pseries/hvcserver.c +++ b/arch/powerpc/platforms/pseries/hvcserver.c @@ -142,11 +142,11 @@ int hvcs_get_partner_info(uint32_t unit_address, struct list_head *head, int more = 1; int retval; - memset(pi_buff, 0x00, PAGE_SIZE); /* invalid parameters */ if (!head || !pi_buff) return -EINVAL; + memset(pi_buff, 0x00, PAGE_SIZE); last_p_partition_ID = last_p_unit_address = ~0UL; INIT_LIST_HEAD(head); diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index 0946b98d75d4..bd98ce2be17b 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -532,7 +532,6 @@ static int tce_setrange_multi_pSeriesLP_walk(unsigned long start_pfn, return tce_setrange_multi_pSeriesLP(start_pfn, num_pfn, arg); } -#ifdef CONFIG_PCI static void iommu_table_setparms(struct pci_controller *phb, struct device_node *dn, struct iommu_table *tbl) @@ -1292,15 +1291,6 @@ static u64 dma_get_required_mask_pSeriesLP(struct device *dev) return dma_iommu_ops.get_required_mask(dev); } -#else /* CONFIG_PCI */ -#define pci_dma_bus_setup_pSeries NULL -#define pci_dma_dev_setup_pSeries NULL -#define pci_dma_bus_setup_pSeriesLP NULL -#define pci_dma_dev_setup_pSeriesLP NULL -#define dma_set_mask_pSeriesLP NULL -#define dma_get_required_mask_pSeriesLP NULL -#endif /* !CONFIG_PCI */ - static int iommu_mem_notifier(struct notifier_block *nb, unsigned long action, void *data) { diff --git a/arch/powerpc/platforms/pseries/of_helpers.c b/arch/powerpc/platforms/pseries/of_helpers.c new file mode 100644 index 000000000000..2798933c0e38 --- /dev/null +++ b/arch/powerpc/platforms/pseries/of_helpers.c @@ -0,0 +1,38 @@ +#include <linux/string.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/of.h> + +#include "of_helpers.h" + +/** + * pseries_of_derive_parent - basically like dirname(1) + * @path: the full_name of a node to be added to the tree + * + * Returns the node which should be the parent of the node + * described by path. E.g., for path = "/foo/bar", returns + * the node with full_name = "/foo". + */ +struct device_node *pseries_of_derive_parent(const char *path) +{ + struct device_node *parent; + char *parent_path = "/"; + const char *tail; + + /* We do not want the trailing '/' character */ + tail = kbasename(path) - 1; + + /* reject if path is "/" */ + if (!strcmp(path, "/")) + return ERR_PTR(-EINVAL); + + if (tail > path) { + parent_path = kstrndup(path, tail - path, GFP_KERNEL); + if (!parent_path) + return ERR_PTR(-ENOMEM); + } + parent = of_find_node_by_path(parent_path); + if (strcmp(parent_path, "/")) + kfree(parent_path); + return parent ? parent : ERR_PTR(-EINVAL); +} diff --git a/arch/powerpc/platforms/pseries/of_helpers.h b/arch/powerpc/platforms/pseries/of_helpers.h new file mode 100644 index 000000000000..bb83d39aef65 --- /dev/null +++ b/arch/powerpc/platforms/pseries/of_helpers.h @@ -0,0 +1,8 @@ +#ifndef _PSERIES_OF_HELPERS_H +#define _PSERIES_OF_HELPERS_H + +#include <linux/of.h> + +struct device_node *pseries_of_derive_parent(const char *path); + +#endif /* _PSERIES_OF_HELPERS_H */ diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c index 0f319521e002..7c7fcc042549 100644 --- a/arch/powerpc/platforms/pseries/reconfig.c +++ b/arch/powerpc/platforms/pseries/reconfig.c @@ -22,37 +22,7 @@ #include <asm/uaccess.h> #include <asm/mmu.h> -/** - * derive_parent - basically like dirname(1) - * @path: the full_name of a node to be added to the tree - * - * Returns the node which should be the parent of the node - * described by path. E.g., for path = "/foo/bar", returns - * the node with full_name = "/foo". - */ -static struct device_node *derive_parent(const char *path) -{ - struct device_node *parent = NULL; - char *parent_path = "/"; - size_t parent_path_len = strrchr(path, '/') - path + 1; - - /* reject if path is "/" */ - if (!strcmp(path, "/")) - return ERR_PTR(-EINVAL); - - if (strrchr(path, '/') != path) { - parent_path = kmalloc(parent_path_len, GFP_KERNEL); - if (!parent_path) - return ERR_PTR(-ENOMEM); - strlcpy(parent_path, path, parent_path_len); - } - parent = of_find_node_by_path(parent_path); - if (!parent) - return ERR_PTR(-EINVAL); - if (strcmp(parent_path, "/")) - kfree(parent_path); - return parent; -} +#include "of_helpers.h" static int pSeries_reconfig_add_node(const char *path, struct property *proplist) { @@ -71,7 +41,7 @@ static int pSeries_reconfig_add_node(const char *path, struct property *proplist of_node_set_flag(np, OF_DYNAMIC); of_node_init(np); - np->parent = derive_parent(path); + np->parent = pseries_of_derive_parent(path); if (IS_ERR(np->parent)) { err = PTR_ERR(np->parent); goto out_err; diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 9a83eb71b030..9e524c26db14 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -837,10 +837,6 @@ static int pSeries_pci_probe_mode(struct pci_bus *bus) return PCI_PROBE_NORMAL; } -#ifndef CONFIG_PCI -void pSeries_final_fixup(void) { } -#endif - struct pci_controller_ops pseries_pci_controller_ops = { .probe_mode = pSeries_pci_probe_mode, }; diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c index e2ea51961979..e00a5ee58fd7 100644 --- a/arch/powerpc/sysdev/cpm_common.c +++ b/arch/powerpc/sysdev/cpm_common.c @@ -147,7 +147,8 @@ unsigned long cpm_muram_alloc(unsigned long size, unsigned long align) spin_lock_irqsave(&cpm_muram_lock, flags); cpm_muram_info.alignment = align; start = rh_alloc(&cpm_muram_info, size, "commproc"); - memset_io(cpm_muram_addr(start), 0, size); + if (!IS_ERR_VALUE(start)) + memset_io(cpm_muram_addr(start), 0, size); spin_unlock_irqrestore(&cpm_muram_lock, flags); return start; diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index 13b9bcf5485e..610f472f91d1 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -179,6 +179,19 @@ static int setup_one_atmu(struct ccsr_pci __iomem *pci, return i; } +static bool is_kdump(void) +{ + struct device_node *node; + + node = of_find_node_by_type(NULL, "memory"); + if (!node) { + WARN_ON_ONCE(1); + return false; + } + + return of_property_read_bool(node, "linux,usable-memory"); +} + /* atmu setup for fsl pci/pcie controller */ static void setup_pci_atmu(struct pci_controller *hose) { @@ -192,6 +205,16 @@ static void setup_pci_atmu(struct pci_controller *hose) const char *name = hose->dn->full_name; const u64 *reg; int len; + bool setup_inbound; + + /* + * If this is kdump, we don't want to trigger a bunch of PCI + * errors by closing the window on in-flight DMA. + * + * We still run most of the function's logic so that things like + * hose->dma_window_size still get set. + */ + setup_inbound = !is_kdump(); if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) { if (in_be32(&pci->block_rev1) >= PCIE_IP_REV_2_2) { @@ -204,8 +227,11 @@ static void setup_pci_atmu(struct pci_controller *hose) /* Disable all windows (except powar0 since it's ignored) */ for(i = 1; i < 5; i++) out_be32(&pci->pow[i].powar, 0); - for (i = start_idx; i < end_idx; i++) - out_be32(&pci->piw[i].piwar, 0); + + if (setup_inbound) { + for (i = start_idx; i < end_idx; i++) + out_be32(&pci->piw[i].piwar, 0); + } /* Setup outbound MEM window */ for(i = 0, j = 1; i < 3; i++) { @@ -278,6 +304,7 @@ static void setup_pci_atmu(struct pci_controller *hose) /* Setup inbound mem window */ mem = memblock_end_of_DRAM(); + pr_info("%s: end of DRAM %llx\n", __func__, mem); /* * The msi-address-64 property, if it exists, indicates the physical @@ -320,12 +347,14 @@ static void setup_pci_atmu(struct pci_controller *hose) piwar |= ((mem_log - 1) & PIWAR_SZ_MASK); - /* Setup inbound memory window */ - out_be32(&pci->piw[win_idx].pitar, 0x00000000); - out_be32(&pci->piw[win_idx].piwbar, 0x00000000); - out_be32(&pci->piw[win_idx].piwar, piwar); - win_idx--; + if (setup_inbound) { + /* Setup inbound memory window */ + out_be32(&pci->piw[win_idx].pitar, 0x00000000); + out_be32(&pci->piw[win_idx].piwbar, 0x00000000); + out_be32(&pci->piw[win_idx].piwar, piwar); + } + win_idx--; hose->dma_window_base_cur = 0x00000000; hose->dma_window_size = (resource_size_t)sz; @@ -343,13 +372,15 @@ static void setup_pci_atmu(struct pci_controller *hose) piwar = (piwar & ~PIWAR_SZ_MASK) | (mem_log - 1); - /* Setup inbound memory window */ - out_be32(&pci->piw[win_idx].pitar, 0x00000000); - out_be32(&pci->piw[win_idx].piwbear, - pci64_dma_offset >> 44); - out_be32(&pci->piw[win_idx].piwbar, - pci64_dma_offset >> 12); - out_be32(&pci->piw[win_idx].piwar, piwar); + if (setup_inbound) { + /* Setup inbound memory window */ + out_be32(&pci->piw[win_idx].pitar, 0x00000000); + out_be32(&pci->piw[win_idx].piwbear, + pci64_dma_offset >> 44); + out_be32(&pci->piw[win_idx].piwbar, + pci64_dma_offset >> 12); + out_be32(&pci->piw[win_idx].piwar, piwar); + } /* * install our own dma_set_mask handler to fixup dma_ops @@ -362,12 +393,15 @@ static void setup_pci_atmu(struct pci_controller *hose) } else { u64 paddr = 0; - /* Setup inbound memory window */ - out_be32(&pci->piw[win_idx].pitar, paddr >> 12); - out_be32(&pci->piw[win_idx].piwbar, paddr >> 12); - out_be32(&pci->piw[win_idx].piwar, (piwar | (mem_log - 1))); - win_idx--; + if (setup_inbound) { + /* Setup inbound memory window */ + out_be32(&pci->piw[win_idx].pitar, paddr >> 12); + out_be32(&pci->piw[win_idx].piwbar, paddr >> 12); + out_be32(&pci->piw[win_idx].piwar, + (piwar | (mem_log - 1))); + } + win_idx--; paddr += 1ull << mem_log; sz -= 1ull << mem_log; @@ -375,11 +409,15 @@ static void setup_pci_atmu(struct pci_controller *hose) mem_log = ilog2(sz); piwar |= (mem_log - 1); - out_be32(&pci->piw[win_idx].pitar, paddr >> 12); - out_be32(&pci->piw[win_idx].piwbar, paddr >> 12); - out_be32(&pci->piw[win_idx].piwar, piwar); - win_idx--; + if (setup_inbound) { + out_be32(&pci->piw[win_idx].pitar, + paddr >> 12); + out_be32(&pci->piw[win_idx].piwbar, + paddr >> 12); + out_be32(&pci->piw[win_idx].piwar, piwar); + } + win_idx--; paddr += 1ull << mem_log; } @@ -1002,7 +1040,7 @@ int fsl_pci_mcheck_exception(struct pt_regs *regs) ret = probe_kernel_address((void *)regs->nip, inst); } - if (mcheck_handle_load(regs, inst)) { + if (!ret && mcheck_handle_load(regs, inst)) { regs->nip += 4; return 1; } diff --git a/arch/powerpc/sysdev/mpc5xxx_clocks.c b/arch/powerpc/sysdev/mpc5xxx_clocks.c index f4f0301b9a60..573292663cf2 100644 --- a/arch/powerpc/sysdev/mpc5xxx_clocks.c +++ b/arch/powerpc/sysdev/mpc5xxx_clocks.c @@ -13,7 +13,6 @@ unsigned long mpc5xxx_get_bus_frequency(struct device_node *node) { - struct device_node *np; const unsigned int *p_bus_freq = NULL; of_node_get(node); @@ -22,9 +21,7 @@ unsigned long mpc5xxx_get_bus_frequency(struct device_node *node) if (p_bus_freq) break; - np = of_get_parent(node); - of_node_put(node); - node = np; + node = of_get_next_parent(node); } of_node_put(node); diff --git a/arch/powerpc/sysdev/mpc8xx_pic.c b/arch/powerpc/sysdev/mpc8xx_pic.c index 9a423975853a..b7cf7abff2eb 100644 --- a/arch/powerpc/sysdev/mpc8xx_pic.c +++ b/arch/powerpc/sysdev/mpc8xx_pic.c @@ -61,7 +61,7 @@ static int mpc8xx_set_irq_type(struct irq_data *d, unsigned int flow_type) } static struct irq_chip mpc8xx_pic = { - .name = "MPC8XX SIU", + .name = "8XX SIU", .irq_unmask = mpc8xx_unmask_irq, .irq_mask = mpc8xx_mask_irq, .irq_ack = mpc8xx_ack, diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index cecd1156c185..2a0452e364ba 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -924,22 +924,6 @@ int mpic_set_irq_type(struct irq_data *d, unsigned int flow_type) return IRQ_SET_MASK_OK_NOCOPY; } -static int mpic_irq_set_wake(struct irq_data *d, unsigned int on) -{ - struct irq_desc *desc = container_of(d, struct irq_desc, irq_data); - struct mpic *mpic = mpic_from_irq_data(d); - - if (!(mpic->flags & MPIC_FSL)) - return -ENXIO; - - if (on) - desc->action->flags |= IRQF_NO_SUSPEND; - else - desc->action->flags &= ~IRQF_NO_SUSPEND; - - return 0; -} - void mpic_set_vector(unsigned int virq, unsigned int vector) { struct mpic *mpic = mpic_from_irq(virq); @@ -977,7 +961,6 @@ static struct irq_chip mpic_irq_chip = { .irq_unmask = mpic_unmask_irq, .irq_eoi = mpic_end_irq, .irq_set_type = mpic_set_irq_type, - .irq_set_wake = mpic_irq_set_wake, }; #ifdef CONFIG_SMP @@ -992,7 +975,6 @@ static struct irq_chip mpic_tm_chip = { .irq_mask = mpic_mask_tm, .irq_unmask = mpic_unmask_tm, .irq_eoi = mpic_end_irq, - .irq_set_wake = mpic_irq_set_wake, }; #ifdef CONFIG_MPIC_U3_HT_IRQS @@ -1284,8 +1266,11 @@ struct mpic * __init mpic_alloc(struct device_node *node, flags |= MPIC_NO_RESET; if (of_get_property(node, "single-cpu-affinity", NULL)) flags |= MPIC_SINGLE_DEST_CPU; - if (of_device_is_compatible(node, "fsl,mpic")) + if (of_device_is_compatible(node, "fsl,mpic")) { flags |= MPIC_FSL | MPIC_LARGE_VECTORS; + mpic_irq_chip.flags |= IRQCHIP_SKIP_SET_WAKE; + mpic_tm_chip.flags |= IRQCHIP_SKIP_SET_WAKE; + } mpic = kzalloc(sizeof(struct mpic), GFP_KERNEL); if (mpic == NULL) diff --git a/arch/powerpc/sysdev/msi_bitmap.c b/arch/powerpc/sysdev/msi_bitmap.c index 73b64c73505b..ed5234ed8d3f 100644 --- a/arch/powerpc/sysdev/msi_bitmap.c +++ b/arch/powerpc/sysdev/msi_bitmap.c @@ -11,6 +11,7 @@ #include <linux/slab.h> #include <linux/kernel.h> #include <linux/bitmap.h> +#include <linux/bootmem.h> #include <asm/msi_bitmap.h> #include <asm/setup.h> @@ -111,7 +112,7 @@ int msi_bitmap_reserve_dt_hwirqs(struct msi_bitmap *bmp) return 0; } -int msi_bitmap_alloc(struct msi_bitmap *bmp, unsigned int irq_count, +int __init_refok msi_bitmap_alloc(struct msi_bitmap *bmp, unsigned int irq_count, struct device_node *of_node) { int size; @@ -122,7 +123,15 @@ int msi_bitmap_alloc(struct msi_bitmap *bmp, unsigned int irq_count, size = BITS_TO_LONGS(irq_count) * sizeof(long); pr_debug("msi_bitmap: allocator bitmap size is 0x%x bytes\n", size); - bmp->bitmap = zalloc_maybe_bootmem(size, GFP_KERNEL); + bmp->bitmap_from_slab = slab_is_available(); + if (bmp->bitmap_from_slab) + bmp->bitmap = kzalloc(size, GFP_KERNEL); + else { + bmp->bitmap = memblock_virt_alloc(size, 0); + /* the bitmap won't be freed from memblock allocator */ + kmemleak_not_leak(bmp->bitmap); + } + if (!bmp->bitmap) { pr_debug("msi_bitmap: ENOMEM allocating allocator bitmap!\n"); return -ENOMEM; @@ -138,7 +147,8 @@ int msi_bitmap_alloc(struct msi_bitmap *bmp, unsigned int irq_count, void msi_bitmap_free(struct msi_bitmap *bmp) { - /* we can't free the bitmap we don't know if it's bootmem etc. */ + if (bmp->bitmap_from_slab) + kfree(bmp->bitmap); of_node_put(bmp->of_node); bmp->bitmap = NULL; } @@ -203,8 +213,6 @@ static void __init test_basics(void) /* Clients may WARN_ON bitmap == NULL for "not-allocated" */ WARN_ON(bmp.bitmap != NULL); - - kfree(bmp.bitmap); } static void __init test_of_node(void) diff --git a/arch/powerpc/xmon/nonstdio.c b/arch/powerpc/xmon/nonstdio.c index c98748617896..d00123421e00 100644 --- a/arch/powerpc/xmon/nonstdio.c +++ b/arch/powerpc/xmon/nonstdio.c @@ -11,10 +11,25 @@ #include <asm/time.h> #include "nonstdio.h" +static bool paginating, paginate_skipping; +static unsigned long paginate_lpp; /* Lines Per Page */ +static unsigned long paginate_pos; -static int xmon_write(const void *ptr, int nb) +void xmon_start_pagination(void) { - return udbg_write(ptr, nb); + paginating = true; + paginate_skipping = false; + paginate_pos = 0; +} + +void xmon_end_pagination(void) +{ + paginating = false; +} + +void xmon_set_pagination_lpp(unsigned long lpp) +{ + paginate_lpp = lpp; } static int xmon_readchar(void) @@ -24,6 +39,51 @@ static int xmon_readchar(void) return -1; } +static int xmon_write(const char *ptr, int nb) +{ + int rv = 0; + const char *p = ptr, *q; + const char msg[] = "[Hit a key (a:all, q:truncate, any:next page)]"; + + if (nb <= 0) + return rv; + + if (paginating && paginate_skipping) + return nb; + + if (paginate_lpp) { + while (paginating && (q = strchr(p, '\n'))) { + rv += udbg_write(p, q - p + 1); + p = q + 1; + paginate_pos++; + + if (paginate_pos >= paginate_lpp) { + udbg_write(msg, strlen(msg)); + + switch (xmon_readchar()) { + case 'a': + paginating = false; + break; + case 'q': + paginate_skipping = true; + break; + default: + /* nothing */ + break; + } + + paginate_pos = 0; + udbg_write("\r\n", 2); + + if (paginate_skipping) + return nb; + } + } + } + + return rv + udbg_write(p, nb - (p - ptr)); +} + int xmon_putchar(int c) { char ch = c; diff --git a/arch/powerpc/xmon/nonstdio.h b/arch/powerpc/xmon/nonstdio.h index 18a51ded4ffd..f8653365667e 100644 --- a/arch/powerpc/xmon/nonstdio.h +++ b/arch/powerpc/xmon/nonstdio.h @@ -3,6 +3,9 @@ #define printf xmon_printf #define putchar xmon_putchar +extern void xmon_set_pagination_lpp(unsigned long lpp); +extern void xmon_start_pagination(void); +extern void xmon_end_pagination(void); extern int xmon_putchar(int c); extern void xmon_puts(const char *); extern char *xmon_gets(char *, int); diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 6ef1231c6e9c..786bf01691c9 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -242,6 +242,7 @@ Commands:\n\ " u dump TLB\n" #endif " ? help\n" +" # n limit output to n lines per page (for dp, dpa, dl)\n" " zr reboot\n\ zh halt\n" ; @@ -833,6 +834,16 @@ static void remove_cpu_bpts(void) write_ciabr(0); } +static void set_lpp_cmd(void) +{ + unsigned long lpp; + + if (!scanhex(&lpp)) { + printf("Invalid number.\n"); + lpp = 0; + } + xmon_set_pagination_lpp(lpp); +} /* Command interpreting routine */ static char *last_cmd; @@ -924,6 +935,9 @@ cmds(struct pt_regs *excp) case '?': xmon_puts(help_string); break; + case '#': + set_lpp_cmd(); + break; case 'b': bpt_cmds(); break; @@ -2072,6 +2086,9 @@ static void xmon_rawdump (unsigned long adrs, long ndump) static void dump_one_paca(int cpu) { struct paca_struct *p; +#ifdef CONFIG_PPC_STD_MMU_64 + int i = 0; +#endif if (setjmp(bus_error_jmp) != 0) { printf("*** Error dumping paca for cpu 0x%x!\n", cpu); @@ -2085,12 +2102,12 @@ static void dump_one_paca(int cpu) printf("paca for cpu 0x%x @ %p:\n", cpu, p); - printf(" %-*s = %s\n", 16, "possible", cpu_possible(cpu) ? "yes" : "no"); - printf(" %-*s = %s\n", 16, "present", cpu_present(cpu) ? "yes" : "no"); - printf(" %-*s = %s\n", 16, "online", cpu_online(cpu) ? "yes" : "no"); + printf(" %-*s = %s\n", 20, "possible", cpu_possible(cpu) ? "yes" : "no"); + printf(" %-*s = %s\n", 20, "present", cpu_present(cpu) ? "yes" : "no"); + printf(" %-*s = %s\n", 20, "online", cpu_online(cpu) ? "yes" : "no"); #define DUMP(paca, name, format) \ - printf(" %-*s = %#-*"format"\t(0x%lx)\n", 16, #name, 18, paca->name, \ + printf(" %-*s = %#-*"format"\t(0x%lx)\n", 20, #name, 18, paca->name, \ offsetof(struct paca_struct, name)); DUMP(p, lock_token, "x"); @@ -2102,11 +2119,41 @@ static void dump_one_paca(int cpu) #ifdef CONFIG_PPC_BOOK3S_64 DUMP(p, mc_emergency_sp, "p"); DUMP(p, in_mce, "x"); + DUMP(p, hmi_event_available, "x"); #endif DUMP(p, data_offset, "lx"); DUMP(p, hw_cpu_id, "x"); DUMP(p, cpu_start, "x"); DUMP(p, kexec_state, "x"); +#ifdef CONFIG_PPC_STD_MMU_64 + for (i = 0; i < SLB_NUM_BOLTED; i++) { + u64 esid, vsid; + + if (!p->slb_shadow_ptr) + continue; + + esid = be64_to_cpu(p->slb_shadow_ptr->save_area[i].esid); + vsid = be64_to_cpu(p->slb_shadow_ptr->save_area[i].vsid); + + if (esid || vsid) { + printf(" slb_shadow[%d]: = 0x%016lx 0x%016lx\n", + i, esid, vsid); + } + } + DUMP(p, vmalloc_sllp, "x"); + DUMP(p, slb_cache_ptr, "x"); + for (i = 0; i < SLB_CACHE_ENTRIES; i++) + printf(" slb_cache[%d]: = 0x%016lx\n", i, p->slb_cache[i]); +#endif + DUMP(p, dscr_default, "llx"); +#ifdef CONFIG_PPC_BOOK3E + DUMP(p, pgd, "p"); + DUMP(p, kernel_pgd, "p"); + DUMP(p, tcd_ptr, "p"); + DUMP(p, mc_kstack, "p"); + DUMP(p, crit_kstack, "p"); + DUMP(p, dbg_kstack, "p"); +#endif DUMP(p, __current, "p"); DUMP(p, kstack, "lx"); DUMP(p, stab_rr, "lx"); @@ -2117,7 +2164,27 @@ static void dump_one_paca(int cpu) DUMP(p, io_sync, "x"); DUMP(p, irq_work_pending, "x"); DUMP(p, nap_state_lost, "x"); + DUMP(p, sprg_vdso, "llx"); + +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + DUMP(p, tm_scratch, "llx"); +#endif + +#ifdef CONFIG_PPC_POWERNV + DUMP(p, core_idle_state_ptr, "p"); + DUMP(p, thread_idle_state, "x"); + DUMP(p, thread_mask, "x"); + DUMP(p, subcore_sibling_mask, "x"); +#endif + DUMP(p, user_time, "llx"); + DUMP(p, system_time, "llx"); + DUMP(p, user_time_scaled, "llx"); + DUMP(p, starttime, "llx"); + DUMP(p, starttime_user, "llx"); + DUMP(p, startspurr, "llx"); + DUMP(p, utime_sspurr, "llx"); + DUMP(p, stolen_time, "llx"); #undef DUMP catch_memory_errors = 0; @@ -2166,7 +2233,9 @@ dump(void) #ifdef CONFIG_PPC64 if (c == 'p') { + xmon_start_pagination(); dump_pacas(); + xmon_end_pagination(); return; } #endif @@ -2315,10 +2384,12 @@ dump_log_buf(void) sync(); kmsg_dump_rewind_nolock(&dumper); + xmon_start_pagination(); while (kmsg_dump_get_line_nolock(&dumper, false, buf, sizeof(buf), &len)) { buf[len] = '\0'; printf("%s", buf); } + xmon_end_pagination(); sync(); /* wait a little while to see if we get a machine check */ diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c index a56ee9bedd11..05755441250c 100644 --- a/drivers/char/agp/uninorth-agp.c +++ b/drivers/char/agp/uninorth-agp.c @@ -361,6 +361,10 @@ static int agp_uninorth_resume(struct pci_dev *pdev) } #endif /* CONFIG_PM */ +static struct { + struct page **pages_arr; +} uninorth_priv; + static int uninorth_create_gatt_table(struct agp_bridge_data *bridge) { char *table; @@ -371,7 +375,6 @@ static int uninorth_create_gatt_table(struct agp_bridge_data *bridge) int i; void *temp; struct page *page; - struct page **pages; /* We can't handle 2 level gatt's */ if (bridge->driver->size_type == LVL2_APER_SIZE) @@ -400,8 +403,8 @@ static int uninorth_create_gatt_table(struct agp_bridge_data *bridge) if (table == NULL) return -ENOMEM; - pages = kmalloc((1 << page_order) * sizeof(struct page*), GFP_KERNEL); - if (pages == NULL) + uninorth_priv.pages_arr = kmalloc((1 << page_order) * sizeof(struct page*), GFP_KERNEL); + if (uninorth_priv.pages_arr == NULL) goto enomem; table_end = table + ((PAGE_SIZE * (1 << page_order)) - 1); @@ -409,14 +412,14 @@ static int uninorth_create_gatt_table(struct agp_bridge_data *bridge) for (page = virt_to_page(table), i = 0; page <= virt_to_page(table_end); page++, i++) { SetPageReserved(page); - pages[i] = page; + uninorth_priv.pages_arr[i] = page; } bridge->gatt_table_real = (u32 *) table; /* Need to clear out any dirty data still sitting in caches */ flush_dcache_range((unsigned long)table, (unsigned long)table_end + 1); - bridge->gatt_table = vmap(pages, (1 << page_order), 0, PAGE_KERNEL_NCG); + bridge->gatt_table = vmap(uninorth_priv.pages_arr, (1 << page_order), 0, PAGE_KERNEL_NCG); if (bridge->gatt_table == NULL) goto enomem; @@ -434,7 +437,7 @@ static int uninorth_create_gatt_table(struct agp_bridge_data *bridge) return 0; enomem: - kfree(pages); + kfree(uninorth_priv.pages_arr); if (table) free_pages((unsigned long)table, page_order); return -ENOMEM; @@ -456,6 +459,7 @@ static int uninorth_free_gatt_table(struct agp_bridge_data *bridge) */ vunmap(bridge->gatt_table); + kfree(uninorth_priv.pages_arr); table = (char *) bridge->gatt_table_real; table_end = table + ((PAGE_SIZE * (1 << page_order)) - 1); diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 57316528e924..7a1ab24052b8 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -132,7 +132,7 @@ config COMMON_CLK_AXI_CLKGEN config CLK_QORIQ bool "Clock driver for Freescale QorIQ platforms" - depends on (PPC_E500MC || ARM || COMPILE_TEST) && OF + depends on (PPC_E500MC || ARM || ARM64 || COMPILE_TEST) && OF ---help--- This adds the clock driver support for Freescale QorIQ platforms using common clock framework. diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c index cda90a971e39..1ab0fb81c6a0 100644 --- a/drivers/clk/clk-qoriq.c +++ b/drivers/clk/clk-qoriq.c @@ -10,7 +10,9 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include <linux/clk.h> #include <linux/clk-provider.h> +#include <linux/fsl/guts.h> #include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> @@ -19,213 +21,1029 @@ #include <linux/of.h> #include <linux/slab.h> -struct cmux_clk { +#define PLL_DIV1 0 +#define PLL_DIV2 1 +#define PLL_DIV3 2 +#define PLL_DIV4 3 + +#define PLATFORM_PLL 0 +#define CGA_PLL1 1 +#define CGA_PLL2 2 +#define CGA_PLL3 3 +#define CGA_PLL4 4 /* only on clockgen-1.0, which lacks CGB */ +#define CGB_PLL1 4 +#define CGB_PLL2 5 + +struct clockgen_pll_div { + struct clk *clk; + char name[32]; +}; + +struct clockgen_pll { + struct clockgen_pll_div div[4]; +}; + +#define CLKSEL_VALID 1 +#define CLKSEL_80PCT 2 /* Only allowed if PLL <= 80% of max cpu freq */ + +struct clockgen_sourceinfo { + u32 flags; /* CLKSEL_xxx */ + int pll; /* CGx_PLLn */ + int div; /* PLL_DIVn */ +}; + +#define NUM_MUX_PARENTS 16 + +struct clockgen_muxinfo { + struct clockgen_sourceinfo clksel[NUM_MUX_PARENTS]; +}; + +#define NUM_HWACCEL 5 +#define NUM_CMUX 8 + +struct clockgen; + +/* + * cmux freq must be >= platform pll. + * If not set, cmux freq must be >= platform pll/2 + */ +#define CG_CMUX_GE_PLAT 1 + +#define CG_PLL_8BIT 2 /* PLLCnGSR[CFG] is 8 bits, not 6 */ +#define CG_VER3 4 /* version 3 cg: reg layout different */ +#define CG_LITTLE_ENDIAN 8 + +struct clockgen_chipinfo { + const char *compat, *guts_compat; + const struct clockgen_muxinfo *cmux_groups[2]; + const struct clockgen_muxinfo *hwaccel[NUM_HWACCEL]; + void (*init_periph)(struct clockgen *cg); + int cmux_to_group[NUM_CMUX]; /* -1 terminates if fewer than NUM_CMUX */ + u32 pll_mask; /* 1 << n bit set if PLL n is valid */ + u32 flags; /* CG_xxx */ +}; + +struct clockgen { + struct device_node *node; + void __iomem *regs; + struct clockgen_chipinfo info; /* mutable copy */ + struct clk *sysclk; + struct clockgen_pll pll[6]; + struct clk *cmux[NUM_CMUX]; + struct clk *hwaccel[NUM_HWACCEL]; + struct clk *fman[2]; + struct ccsr_guts __iomem *guts; +}; + +static struct clockgen clockgen; + +static void cg_out(struct clockgen *cg, u32 val, u32 __iomem *reg) +{ + if (cg->info.flags & CG_LITTLE_ENDIAN) + iowrite32(val, reg); + else + iowrite32be(val, reg); +} + +static u32 cg_in(struct clockgen *cg, u32 __iomem *reg) +{ + u32 val; + + if (cg->info.flags & CG_LITTLE_ENDIAN) + val = ioread32(reg); + else + val = ioread32be(reg); + + return val; +} + +static const struct clockgen_muxinfo p2041_cmux_grp1 = { + { + [0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 }, + [1] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 }, + [4] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 }, + } +}; + +static const struct clockgen_muxinfo p2041_cmux_grp2 = { + { + [0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 }, + [4] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 }, + [5] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 }, + } +}; + +static const struct clockgen_muxinfo p5020_cmux_grp1 = { + { + [0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 }, + [1] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 }, + [4] = { CLKSEL_VALID | CLKSEL_80PCT, CGA_PLL2, PLL_DIV1 }, + } +}; + +static const struct clockgen_muxinfo p5020_cmux_grp2 = { + { + [0] = { CLKSEL_VALID | CLKSEL_80PCT, CGA_PLL1, PLL_DIV1 }, + [4] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 }, + [5] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 }, + } +}; + +static const struct clockgen_muxinfo p5040_cmux_grp1 = { + { + [0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 }, + [1] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 }, + [4] = { CLKSEL_VALID | CLKSEL_80PCT, CGA_PLL2, PLL_DIV1 }, + [5] = { CLKSEL_VALID | CLKSEL_80PCT, CGA_PLL2, PLL_DIV2 }, + } +}; + +static const struct clockgen_muxinfo p5040_cmux_grp2 = { + { + [0] = { CLKSEL_VALID | CLKSEL_80PCT, CGA_PLL1, PLL_DIV1 }, + [1] = { CLKSEL_VALID | CLKSEL_80PCT, CGA_PLL1, PLL_DIV2 }, + [4] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 }, + [5] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 }, + } +}; + +static const struct clockgen_muxinfo p4080_cmux_grp1 = { + { + [0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 }, + [1] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 }, + [4] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 }, + [5] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 }, + [8] = { CLKSEL_VALID | CLKSEL_80PCT, CGA_PLL3, PLL_DIV1 }, + } +}; + +static const struct clockgen_muxinfo p4080_cmux_grp2 = { + { + [0] = { CLKSEL_VALID | CLKSEL_80PCT, CGA_PLL1, PLL_DIV1 }, + [8] = { CLKSEL_VALID, CGA_PLL3, PLL_DIV1 }, + [9] = { CLKSEL_VALID, CGA_PLL3, PLL_DIV2 }, + [12] = { CLKSEL_VALID, CGA_PLL4, PLL_DIV1 }, + [13] = { CLKSEL_VALID, CGA_PLL4, PLL_DIV2 }, + } +}; + +static const struct clockgen_muxinfo t1023_cmux = { + { + [0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 }, + [1] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 }, + } +}; + +static const struct clockgen_muxinfo t1040_cmux = { + { + [0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 }, + [1] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 }, + [4] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 }, + [5] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 }, + } +}; + + +static const struct clockgen_muxinfo clockgen2_cmux_cga = { + { + { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 }, + { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 }, + { CLKSEL_VALID, CGA_PLL1, PLL_DIV4 }, + {}, + { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 }, + { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 }, + { CLKSEL_VALID, CGA_PLL2, PLL_DIV4 }, + {}, + { CLKSEL_VALID, CGA_PLL3, PLL_DIV1 }, + { CLKSEL_VALID, CGA_PLL3, PLL_DIV2 }, + { CLKSEL_VALID, CGA_PLL3, PLL_DIV4 }, + }, +}; + +static const struct clockgen_muxinfo clockgen2_cmux_cga12 = { + { + { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 }, + { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 }, + { CLKSEL_VALID, CGA_PLL1, PLL_DIV4 }, + {}, + { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 }, + { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 }, + { CLKSEL_VALID, CGA_PLL2, PLL_DIV4 }, + }, +}; + +static const struct clockgen_muxinfo clockgen2_cmux_cgb = { + { + { CLKSEL_VALID, CGB_PLL1, PLL_DIV1 }, + { CLKSEL_VALID, CGB_PLL1, PLL_DIV2 }, + { CLKSEL_VALID, CGB_PLL1, PLL_DIV4 }, + {}, + { CLKSEL_VALID, CGB_PLL2, PLL_DIV1 }, + { CLKSEL_VALID, CGB_PLL2, PLL_DIV2 }, + { CLKSEL_VALID, CGB_PLL2, PLL_DIV4 }, + }, +}; + +static const struct clockgen_muxinfo ls1043a_hwa1 = { + { + {}, + {}, + { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 }, + { CLKSEL_VALID, CGA_PLL1, PLL_DIV3 }, + {}, + {}, + { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 }, + { CLKSEL_VALID, CGA_PLL2, PLL_DIV3 }, + }, +}; + +static const struct clockgen_muxinfo ls1043a_hwa2 = { + { + {}, + { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 }, + {}, + { CLKSEL_VALID, CGA_PLL2, PLL_DIV3 }, + }, +}; + +static const struct clockgen_muxinfo t1023_hwa1 = { + { + {}, + { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 }, + { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 }, + { CLKSEL_VALID, CGA_PLL1, PLL_DIV3 }, + }, +}; + +static const struct clockgen_muxinfo t1023_hwa2 = { + { + [6] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 }, + }, +}; + +static const struct clockgen_muxinfo t2080_hwa1 = { + { + {}, + { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 }, + { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 }, + { CLKSEL_VALID, CGA_PLL1, PLL_DIV3 }, + { CLKSEL_VALID, CGA_PLL1, PLL_DIV4 }, + { CLKSEL_VALID, PLATFORM_PLL, PLL_DIV1 }, + { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 }, + { CLKSEL_VALID, CGA_PLL2, PLL_DIV3 }, + }, +}; + +static const struct clockgen_muxinfo t2080_hwa2 = { + { + {}, + { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 }, + { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 }, + { CLKSEL_VALID, CGA_PLL2, PLL_DIV3 }, + { CLKSEL_VALID, CGA_PLL2, PLL_DIV4 }, + { CLKSEL_VALID, PLATFORM_PLL, PLL_DIV1 }, + { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 }, + { CLKSEL_VALID, CGA_PLL1, PLL_DIV3 }, + }, +}; + +static const struct clockgen_muxinfo t4240_hwa1 = { + { + { CLKSEL_VALID, PLATFORM_PLL, PLL_DIV2 }, + { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 }, + { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 }, + { CLKSEL_VALID, CGA_PLL1, PLL_DIV3 }, + { CLKSEL_VALID, CGA_PLL1, PLL_DIV4 }, + {}, + { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 }, + { CLKSEL_VALID, CGA_PLL2, PLL_DIV3 }, + }, +}; + +static const struct clockgen_muxinfo t4240_hwa4 = { + { + [2] = { CLKSEL_VALID, CGB_PLL1, PLL_DIV2 }, + [3] = { CLKSEL_VALID, CGB_PLL1, PLL_DIV3 }, + [4] = { CLKSEL_VALID, CGB_PLL1, PLL_DIV4 }, + [5] = { CLKSEL_VALID, PLATFORM_PLL, PLL_DIV1 }, + [6] = { CLKSEL_VALID, CGB_PLL2, PLL_DIV2 }, + }, +}; + +static const struct clockgen_muxinfo t4240_hwa5 = { + { + [2] = { CLKSEL_VALID, CGB_PLL2, PLL_DIV2 }, + [3] = { CLKSEL_VALID, CGB_PLL2, PLL_DIV3 }, + [4] = { CLKSEL_VALID, CGB_PLL2, PLL_DIV4 }, + [5] = { CLKSEL_VALID, PLATFORM_PLL, PLL_DIV1 }, + [6] = { CLKSEL_VALID, CGB_PLL1, PLL_DIV2 }, + [7] = { CLKSEL_VALID, CGB_PLL1, PLL_DIV3 }, + }, +}; + +#define RCWSR7_FM1_CLK_SEL 0x40000000 +#define RCWSR7_FM2_CLK_SEL 0x20000000 +#define RCWSR7_HWA_ASYNC_DIV 0x04000000 + +static void __init p2041_init_periph(struct clockgen *cg) +{ + u32 reg; + + reg = ioread32be(&cg->guts->rcwsr[7]); + + if (reg & RCWSR7_FM1_CLK_SEL) + cg->fman[0] = cg->pll[CGA_PLL2].div[PLL_DIV2].clk; + else + cg->fman[0] = cg->pll[PLATFORM_PLL].div[PLL_DIV2].clk; +} + +static void __init p4080_init_periph(struct clockgen *cg) +{ + u32 reg; + + reg = ioread32be(&cg->guts->rcwsr[7]); + + if (reg & RCWSR7_FM1_CLK_SEL) + cg->fman[0] = cg->pll[CGA_PLL3].div[PLL_DIV2].clk; + else + cg->fman[0] = cg->pll[PLATFORM_PLL].div[PLL_DIV2].clk; + + if (reg & RCWSR7_FM2_CLK_SEL) + cg->fman[1] = cg->pll[CGA_PLL3].div[PLL_DIV2].clk; + else + cg->fman[1] = cg->pll[PLATFORM_PLL].div[PLL_DIV2].clk; +} + +static void __init p5020_init_periph(struct clockgen *cg) +{ + u32 reg; + int div = PLL_DIV2; + + reg = ioread32be(&cg->guts->rcwsr[7]); + if (reg & RCWSR7_HWA_ASYNC_DIV) + div = PLL_DIV4; + + if (reg & RCWSR7_FM1_CLK_SEL) + cg->fman[0] = cg->pll[CGA_PLL2].div[div].clk; + else + cg->fman[0] = cg->pll[PLATFORM_PLL].div[PLL_DIV2].clk; +} + +static void __init p5040_init_periph(struct clockgen *cg) +{ + u32 reg; + int div = PLL_DIV2; + + reg = ioread32be(&cg->guts->rcwsr[7]); + if (reg & RCWSR7_HWA_ASYNC_DIV) + div = PLL_DIV4; + + if (reg & RCWSR7_FM1_CLK_SEL) + cg->fman[0] = cg->pll[CGA_PLL3].div[div].clk; + else + cg->fman[0] = cg->pll[PLATFORM_PLL].div[PLL_DIV2].clk; + + if (reg & RCWSR7_FM2_CLK_SEL) + cg->fman[1] = cg->pll[CGA_PLL3].div[div].clk; + else + cg->fman[1] = cg->pll[PLATFORM_PLL].div[PLL_DIV2].clk; +} + +static void __init t1023_init_periph(struct clockgen *cg) +{ + cg->fman[0] = cg->hwaccel[1]; +} + +static void __init t1040_init_periph(struct clockgen *cg) +{ + cg->fman[0] = cg->pll[PLATFORM_PLL].div[PLL_DIV1].clk; +} + +static void __init t2080_init_periph(struct clockgen *cg) +{ + cg->fman[0] = cg->hwaccel[0]; +} + +static void __init t4240_init_periph(struct clockgen *cg) +{ + cg->fman[0] = cg->hwaccel[3]; + cg->fman[1] = cg->hwaccel[4]; +} + +static const struct clockgen_chipinfo chipinfo[] = { + { + .compat = "fsl,b4420-clockgen", + .guts_compat = "fsl,b4860-device-config", + .init_periph = t2080_init_periph, + .cmux_groups = { + &clockgen2_cmux_cga12, &clockgen2_cmux_cgb + }, + .hwaccel = { + &t2080_hwa1 + }, + .cmux_to_group = { + 0, 1, 1, 1, -1 + }, + .pll_mask = 0x3f, + .flags = CG_PLL_8BIT, + }, + { + .compat = "fsl,b4860-clockgen", + .guts_compat = "fsl,b4860-device-config", + .init_periph = t2080_init_periph, + .cmux_groups = { + &clockgen2_cmux_cga12, &clockgen2_cmux_cgb + }, + .hwaccel = { + &t2080_hwa1 + }, + .cmux_to_group = { + 0, 1, 1, 1, -1 + }, + .pll_mask = 0x3f, + .flags = CG_PLL_8BIT, + }, + { + .compat = "fsl,ls1021a-clockgen", + .cmux_groups = { + &t1023_cmux + }, + .cmux_to_group = { + 0, -1 + }, + .pll_mask = 0x03, + }, + { + .compat = "fsl,ls1043a-clockgen", + .init_periph = t2080_init_periph, + .cmux_groups = { + &t1040_cmux + }, + .hwaccel = { + &ls1043a_hwa1, &ls1043a_hwa2 + }, + .cmux_to_group = { + 0, -1 + }, + .pll_mask = 0x07, + .flags = CG_PLL_8BIT, + }, + { + .compat = "fsl,ls2080a-clockgen", + .cmux_groups = { + &clockgen2_cmux_cga12, &clockgen2_cmux_cgb + }, + .cmux_to_group = { + 0, 0, 1, 1, -1 + }, + .pll_mask = 0x37, + .flags = CG_VER3 | CG_LITTLE_ENDIAN, + }, + { + .compat = "fsl,p2041-clockgen", + .guts_compat = "fsl,qoriq-device-config-1.0", + .init_periph = p2041_init_periph, + .cmux_groups = { + &p2041_cmux_grp1, &p2041_cmux_grp2 + }, + .cmux_to_group = { + 0, 0, 1, 1, -1 + }, + .pll_mask = 0x07, + }, + { + .compat = "fsl,p3041-clockgen", + .guts_compat = "fsl,qoriq-device-config-1.0", + .init_periph = p2041_init_periph, + .cmux_groups = { + &p2041_cmux_grp1, &p2041_cmux_grp2 + }, + .cmux_to_group = { + 0, 0, 1, 1, -1 + }, + .pll_mask = 0x07, + }, + { + .compat = "fsl,p4080-clockgen", + .guts_compat = "fsl,qoriq-device-config-1.0", + .init_periph = p4080_init_periph, + .cmux_groups = { + &p4080_cmux_grp1, &p4080_cmux_grp2 + }, + .cmux_to_group = { + 0, 0, 0, 0, 1, 1, 1, 1 + }, + .pll_mask = 0x1f, + }, + { + .compat = "fsl,p5020-clockgen", + .guts_compat = "fsl,qoriq-device-config-1.0", + .init_periph = p5020_init_periph, + .cmux_groups = { + &p2041_cmux_grp1, &p2041_cmux_grp2 + }, + .cmux_to_group = { + 0, 1, -1 + }, + .pll_mask = 0x07, + }, + { + .compat = "fsl,p5040-clockgen", + .guts_compat = "fsl,p5040-device-config", + .init_periph = p5040_init_periph, + .cmux_groups = { + &p5040_cmux_grp1, &p5040_cmux_grp2 + }, + .cmux_to_group = { + 0, 0, 1, 1, -1 + }, + .pll_mask = 0x0f, + }, + { + .compat = "fsl,t1023-clockgen", + .guts_compat = "fsl,t1023-device-config", + .init_periph = t1023_init_periph, + .cmux_groups = { + &t1023_cmux + }, + .hwaccel = { + &t1023_hwa1, &t1023_hwa2 + }, + .cmux_to_group = { + 0, 0, -1 + }, + .pll_mask = 0x03, + .flags = CG_PLL_8BIT, + }, + { + .compat = "fsl,t1040-clockgen", + .guts_compat = "fsl,t1040-device-config", + .init_periph = t1040_init_periph, + .cmux_groups = { + &t1040_cmux + }, + .cmux_to_group = { + 0, 0, 0, 0, -1 + }, + .pll_mask = 0x07, + .flags = CG_PLL_8BIT, + }, + { + .compat = "fsl,t2080-clockgen", + .guts_compat = "fsl,t2080-device-config", + .init_periph = t2080_init_periph, + .cmux_groups = { + &clockgen2_cmux_cga12 + }, + .hwaccel = { + &t2080_hwa1, &t2080_hwa2 + }, + .cmux_to_group = { + 0, -1 + }, + .pll_mask = 0x07, + .flags = CG_PLL_8BIT, + }, + { + .compat = "fsl,t4240-clockgen", + .guts_compat = "fsl,t4240-device-config", + .init_periph = t4240_init_periph, + .cmux_groups = { + &clockgen2_cmux_cga, &clockgen2_cmux_cgb + }, + .hwaccel = { + &t4240_hwa1, NULL, NULL, &t4240_hwa4, &t4240_hwa5 + }, + .cmux_to_group = { + 0, 0, 1, -1 + }, + .pll_mask = 0x3f, + .flags = CG_PLL_8BIT, + }, + {}, +}; + +struct mux_hwclock { struct clk_hw hw; - void __iomem *reg; - unsigned int clk_per_pll; - u32 flags; + struct clockgen *cg; + const struct clockgen_muxinfo *info; + u32 __iomem *reg; + u8 parent_to_clksel[NUM_MUX_PARENTS]; + s8 clksel_to_parent[NUM_MUX_PARENTS]; + int num_parents; }; -#define PLL_KILL BIT(31) +#define to_mux_hwclock(p) container_of(p, struct mux_hwclock, hw) +#define CLKSEL_MASK 0x78000000 #define CLKSEL_SHIFT 27 -#define CLKSEL_ADJUST BIT(0) -#define to_cmux_clk(p) container_of(p, struct cmux_clk, hw) -static int cmux_set_parent(struct clk_hw *hw, u8 idx) +static int mux_set_parent(struct clk_hw *hw, u8 idx) { - struct cmux_clk *clk = to_cmux_clk(hw); + struct mux_hwclock *hwc = to_mux_hwclock(hw); u32 clksel; - clksel = ((idx / clk->clk_per_pll) << 2) + idx % clk->clk_per_pll; - if (clk->flags & CLKSEL_ADJUST) - clksel += 8; - clksel = (clksel & 0xf) << CLKSEL_SHIFT; - iowrite32be(clksel, clk->reg); + if (idx >= hwc->num_parents) + return -EINVAL; + + clksel = hwc->parent_to_clksel[idx]; + cg_out(hwc->cg, (clksel << CLKSEL_SHIFT) & CLKSEL_MASK, hwc->reg); return 0; } -static u8 cmux_get_parent(struct clk_hw *hw) +static u8 mux_get_parent(struct clk_hw *hw) { - struct cmux_clk *clk = to_cmux_clk(hw); + struct mux_hwclock *hwc = to_mux_hwclock(hw); u32 clksel; + s8 ret; - clksel = ioread32be(clk->reg); - clksel = (clksel >> CLKSEL_SHIFT) & 0xf; - if (clk->flags & CLKSEL_ADJUST) - clksel -= 8; - clksel = (clksel >> 2) * clk->clk_per_pll + clksel % 4; + clksel = (cg_in(hwc->cg, hwc->reg) & CLKSEL_MASK) >> CLKSEL_SHIFT; - return clksel; + ret = hwc->clksel_to_parent[clksel]; + if (ret < 0) { + pr_err("%s: mux at %p has bad clksel\n", __func__, hwc->reg); + return 0; + } + + return ret; } static const struct clk_ops cmux_ops = { - .get_parent = cmux_get_parent, - .set_parent = cmux_set_parent, + .get_parent = mux_get_parent, + .set_parent = mux_set_parent, }; -static void __init core_mux_init(struct device_node *np) +/* + * Don't allow setting for now, as the clock options haven't been + * sanitized for additional restrictions. + */ +static const struct clk_ops hwaccel_ops = { + .get_parent = mux_get_parent, +}; + +static const struct clockgen_pll_div *get_pll_div(struct clockgen *cg, + struct mux_hwclock *hwc, + int idx) { - struct clk *clk; - struct clk_init_data init; - struct cmux_clk *cmux_clk; - struct device_node *node; - int rc, count, i; - u32 offset; - const char *clk_name; - const char **parent_names; - struct of_phandle_args clkspec; + int pll, div; - rc = of_property_read_u32(np, "reg", &offset); - if (rc) { - pr_err("%s: could not get reg property\n", np->name); - return; - } + if (!(hwc->info->clksel[idx].flags & CLKSEL_VALID)) + return NULL; - /* get the input clock source count */ - count = of_property_count_strings(np, "clock-names"); - if (count < 0) { - pr_err("%s: get clock count error\n", np->name); - return; - } - parent_names = kcalloc(count, sizeof(char *), GFP_KERNEL); - if (!parent_names) - return; + pll = hwc->info->clksel[idx].pll; + div = hwc->info->clksel[idx].div; - for (i = 0; i < count; i++) - parent_names[i] = of_clk_get_parent_name(np, i); + return &cg->pll[pll].div[div]; +} - cmux_clk = kzalloc(sizeof(*cmux_clk), GFP_KERNEL); - if (!cmux_clk) - goto err_name; +static struct clk * __init create_mux_common(struct clockgen *cg, + struct mux_hwclock *hwc, + const struct clk_ops *ops, + unsigned long min_rate, + unsigned long pct80_rate, + const char *fmt, int idx) +{ + struct clk_init_data init = {}; + struct clk *clk; + const struct clockgen_pll_div *div; + const char *parent_names[NUM_MUX_PARENTS]; + char name[32]; + int i, j; - cmux_clk->reg = of_iomap(np, 0); - if (!cmux_clk->reg) { - pr_err("%s: could not map register\n", __func__); - goto err_clk; - } + snprintf(name, sizeof(name), fmt, idx); - rc = of_parse_phandle_with_args(np, "clocks", "#clock-cells", 0, - &clkspec); - if (rc) { - pr_err("%s: parse clock node error\n", __func__); - goto err_clk; - } + for (i = 0, j = 0; i < NUM_MUX_PARENTS; i++) { + unsigned long rate; - cmux_clk->clk_per_pll = of_property_count_strings(clkspec.np, - "clock-output-names"); - of_node_put(clkspec.np); + hwc->clksel_to_parent[i] = -1; - node = of_find_compatible_node(NULL, NULL, "fsl,p4080-clockgen"); - if (node && (offset >= 0x80)) - cmux_clk->flags = CLKSEL_ADJUST; + div = get_pll_div(cg, hwc, i); + if (!div) + continue; - rc = of_property_read_string_index(np, "clock-output-names", - 0, &clk_name); - if (rc) { - pr_err("%s: read clock names error\n", np->name); - goto err_clk; + rate = clk_get_rate(div->clk); + + if (hwc->info->clksel[i].flags & CLKSEL_80PCT && + rate > pct80_rate) + continue; + if (rate < min_rate) + continue; + + parent_names[j] = div->name; + hwc->parent_to_clksel[j] = i; + hwc->clksel_to_parent[i] = j; + j++; } - init.name = clk_name; - init.ops = &cmux_ops; + init.name = name; + init.ops = ops; init.parent_names = parent_names; - init.num_parents = count; + init.num_parents = hwc->num_parents = j; init.flags = 0; - cmux_clk->hw.init = &init; + hwc->hw.init = &init; + hwc->cg = cg; - clk = clk_register(NULL, &cmux_clk->hw); + clk = clk_register(NULL, &hwc->hw); if (IS_ERR(clk)) { - pr_err("%s: could not register clock\n", clk_name); - goto err_clk; + pr_err("%s: Couldn't register %s: %ld\n", __func__, name, + PTR_ERR(clk)); + kfree(hwc); + return NULL; + } + + return clk; +} + +static struct clk * __init create_one_cmux(struct clockgen *cg, int idx) +{ + struct mux_hwclock *hwc; + const struct clockgen_pll_div *div; + unsigned long plat_rate, min_rate; + u64 pct80_rate; + u32 clksel; + + hwc = kzalloc(sizeof(*hwc), GFP_KERNEL); + if (!hwc) + return NULL; + + hwc->reg = cg->regs + 0x20 * idx; + hwc->info = cg->info.cmux_groups[cg->info.cmux_to_group[idx]]; + + /* + * Find the rate for the default clksel, and treat it as the + * maximum rated core frequency. If this is an incorrect + * assumption, certain clock options (possibly including the + * default clksel) may be inappropriately excluded on certain + * chips. + */ + clksel = (cg_in(cg, hwc->reg) & CLKSEL_MASK) >> CLKSEL_SHIFT; + div = get_pll_div(cg, hwc, clksel); + if (!div) + return NULL; + + pct80_rate = clk_get_rate(div->clk); + pct80_rate *= 8; + do_div(pct80_rate, 10); + + plat_rate = clk_get_rate(cg->pll[PLATFORM_PLL].div[PLL_DIV1].clk); + + if (cg->info.flags & CG_CMUX_GE_PLAT) + min_rate = plat_rate; + else + min_rate = plat_rate / 2; + + return create_mux_common(cg, hwc, &cmux_ops, min_rate, + pct80_rate, "cg-cmux%d", idx); +} + +static struct clk * __init create_one_hwaccel(struct clockgen *cg, int idx) +{ + struct mux_hwclock *hwc; + + hwc = kzalloc(sizeof(*hwc), GFP_KERNEL); + if (!hwc) + return NULL; + + hwc->reg = cg->regs + 0x20 * idx + 0x10; + hwc->info = cg->info.hwaccel[idx]; + + return create_mux_common(cg, hwc, &hwaccel_ops, 0, 0, + "cg-hwaccel%d", idx); +} + +static void __init create_muxes(struct clockgen *cg) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(cg->cmux); i++) { + if (cg->info.cmux_to_group[i] < 0) + break; + if (cg->info.cmux_to_group[i] >= + ARRAY_SIZE(cg->info.cmux_groups)) { + WARN_ON_ONCE(1); + continue; + } + + cg->cmux[i] = create_one_cmux(cg, i); + } + + for (i = 0; i < ARRAY_SIZE(cg->hwaccel); i++) { + if (!cg->info.hwaccel[i]) + continue; + + cg->hwaccel[i] = create_one_hwaccel(cg, i); } +} + +static void __init clockgen_init(struct device_node *np); + +/* Legacy nodes may get probed before the parent clockgen node */ +static void __init legacy_init_clockgen(struct device_node *np) +{ + if (!clockgen.node) + clockgen_init(of_get_parent(np)); +} + +/* Legacy node */ +static void __init core_mux_init(struct device_node *np) +{ + struct clk *clk; + struct resource res; + int idx, rc; + + legacy_init_clockgen(np); + + if (of_address_to_resource(np, 0, &res)) + return; + + idx = (res.start & 0xf0) >> 5; + clk = clockgen.cmux[idx]; rc = of_clk_add_provider(np, of_clk_src_simple_get, clk); if (rc) { - pr_err("Could not register clock provider for node:%s\n", - np->name); - goto err_clk; + pr_err("%s: Couldn't register clk provider for node %s: %d\n", + __func__, np->name, rc); + return; } - goto err_name; +} + +static struct clk *sysclk_from_fixed(struct device_node *node, const char *name) +{ + u32 rate; + + if (of_property_read_u32(node, "clock-frequency", &rate)) + return ERR_PTR(-ENODEV); -err_clk: - kfree(cmux_clk); -err_name: - /* free *_names because they are reallocated when registered */ - kfree(parent_names); + return clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate); } -static void __init core_pll_init(struct device_node *np) +static struct clk *sysclk_from_parent(const char *name) +{ + struct clk *clk; + const char *parent_name; + + clk = of_clk_get(clockgen.node, 0); + if (IS_ERR(clk)) + return clk; + + /* Register the input clock under the desired name. */ + parent_name = __clk_get_name(clk); + clk = clk_register_fixed_factor(NULL, name, parent_name, + 0, 1, 1); + if (IS_ERR(clk)) + pr_err("%s: Couldn't register %s: %ld\n", __func__, name, + PTR_ERR(clk)); + + return clk; +} + +static struct clk * __init create_sysclk(const char *name) +{ + struct device_node *sysclk; + struct clk *clk; + + clk = sysclk_from_fixed(clockgen.node, name); + if (!IS_ERR(clk)) + return clk; + + clk = sysclk_from_parent(name); + if (!IS_ERR(clk)) + return clk; + + sysclk = of_get_child_by_name(clockgen.node, "sysclk"); + if (sysclk) { + clk = sysclk_from_fixed(sysclk, name); + if (!IS_ERR(clk)) + return clk; + } + + pr_err("%s: No input clock\n", __func__); + return NULL; +} + +/* Legacy node */ +static void __init sysclk_init(struct device_node *node) { + struct clk *clk; + + legacy_init_clockgen(node); + + clk = clockgen.sysclk; + if (clk) + of_clk_add_provider(node, of_clk_src_simple_get, clk); +} + +#define PLL_KILL BIT(31) + +static void __init create_one_pll(struct clockgen *cg, int idx) +{ + u32 __iomem *reg; u32 mult; - int i, rc, count; - const char *clk_name, *parent_name; - struct clk_onecell_data *onecell_data; - struct clk **subclks; - void __iomem *base; + struct clockgen_pll *pll = &cg->pll[idx]; + int i; - base = of_iomap(np, 0); - if (!base) { - pr_err("iomap error\n"); + if (!(cg->info.pll_mask & (1 << idx))) return; + + if (cg->info.flags & CG_VER3) { + switch (idx) { + case PLATFORM_PLL: + reg = cg->regs + 0x60080; + break; + case CGA_PLL1: + reg = cg->regs + 0x80; + break; + case CGA_PLL2: + reg = cg->regs + 0xa0; + break; + case CGB_PLL1: + reg = cg->regs + 0x10080; + break; + case CGB_PLL2: + reg = cg->regs + 0x100a0; + break; + default: + WARN_ONCE(1, "index %d\n", idx); + return; + } + } else { + if (idx == PLATFORM_PLL) + reg = cg->regs + 0xc00; + else + reg = cg->regs + 0x800 + 0x20 * (idx - 1); } - /* get the multiple of PLL */ - mult = ioread32be(base); + /* Get the multiple of PLL */ + mult = cg_in(cg, reg); - /* check if this PLL is disabled */ + /* Check if this PLL is disabled */ if (mult & PLL_KILL) { - pr_debug("PLL:%s is disabled\n", np->name); - goto err_map; + pr_debug("%s(): pll %p disabled\n", __func__, reg); + return; } - mult = (mult >> 1) & 0x3f; - parent_name = of_clk_get_parent_name(np, 0); - if (!parent_name) { - pr_err("PLL: %s must have a parent\n", np->name); - goto err_map; + if ((cg->info.flags & CG_VER3) || + ((cg->info.flags & CG_PLL_8BIT) && idx != PLATFORM_PLL)) + mult = (mult & GENMASK(8, 1)) >> 1; + else + mult = (mult & GENMASK(6, 1)) >> 1; + + for (i = 0; i < ARRAY_SIZE(pll->div); i++) { + struct clk *clk; + + snprintf(pll->div[i].name, sizeof(pll->div[i].name), + "cg-pll%d-div%d", idx, i + 1); + + clk = clk_register_fixed_factor(NULL, + pll->div[i].name, "cg-sysclk", 0, mult, i + 1); + if (IS_ERR(clk)) { + pr_err("%s: %s: register failed %ld\n", + __func__, pll->div[i].name, PTR_ERR(clk)); + continue; + } + + pll->div[i].clk = clk; } +} +static void __init create_plls(struct clockgen *cg) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(cg->pll); i++) + create_one_pll(cg, i); +} + +static void __init legacy_pll_init(struct device_node *np, int idx) +{ + struct clockgen_pll *pll; + struct clk_onecell_data *onecell_data; + struct clk **subclks; + int count, rc; + + legacy_init_clockgen(np); + + pll = &clockgen.pll[idx]; count = of_property_count_strings(np, "clock-output-names"); - if (count < 0 || count > 4) { - pr_err("%s: clock is not supported\n", np->name); - goto err_map; - } - subclks = kcalloc(count, sizeof(struct clk *), GFP_KERNEL); + BUILD_BUG_ON(ARRAY_SIZE(pll->div) < 4); + subclks = kcalloc(4, sizeof(struct clk *), GFP_KERNEL); if (!subclks) - goto err_map; + return; onecell_data = kmalloc(sizeof(*onecell_data), GFP_KERNEL); if (!onecell_data) goto err_clks; - for (i = 0; i < count; i++) { - rc = of_property_read_string_index(np, "clock-output-names", - i, &clk_name); - if (rc) { - pr_err("%s: could not get clock names\n", np->name); - goto err_cell; - } - - /* - * when count == 4, there are 4 output clocks: - * /1, /2, /3, /4 respectively - * when count < 4, there are at least 2 output clocks: - * /1, /2, (/4, if count == 3) respectively. - */ - if (count == 4) - subclks[i] = clk_register_fixed_factor(NULL, clk_name, - parent_name, 0, mult, 1 + i); - else - - subclks[i] = clk_register_fixed_factor(NULL, clk_name, - parent_name, 0, mult, 1 << i); - - if (IS_ERR(subclks[i])) { - pr_err("%s: could not register clock\n", clk_name); - goto err_cell; - } + if (count <= 3) { + subclks[0] = pll->div[0].clk; + subclks[1] = pll->div[1].clk; + subclks[2] = pll->div[3].clk; + } else { + subclks[0] = pll->div[0].clk; + subclks[1] = pll->div[1].clk; + subclks[2] = pll->div[2].clk; + subclks[3] = pll->div[3].clk; } onecell_data->clks = subclks; @@ -233,125 +1051,223 @@ static void __init core_pll_init(struct device_node *np) rc = of_clk_add_provider(np, of_clk_src_onecell_get, onecell_data); if (rc) { - pr_err("Could not register clk provider for node:%s\n", - np->name); + pr_err("%s: Couldn't register clk provider for node %s: %d\n", + __func__, np->name, rc); goto err_cell; } - iounmap(base); return; err_cell: kfree(onecell_data); err_clks: kfree(subclks); -err_map: - iounmap(base); } -static void __init sysclk_init(struct device_node *node) +/* Legacy node */ +static void __init pltfrm_pll_init(struct device_node *np) { - struct clk *clk; - const char *clk_name = node->name; - struct device_node *np = of_get_parent(node); - u32 rate; + legacy_pll_init(np, PLATFORM_PLL); +} - if (!np) { - pr_err("could not get parent node\n"); +/* Legacy node */ +static void __init core_pll_init(struct device_node *np) +{ + struct resource res; + int idx; + + if (of_address_to_resource(np, 0, &res)) return; + + if ((res.start & 0xfff) == 0xc00) { + /* + * ls1021a devtree labels the platform PLL + * with the core PLL compatible + */ + pltfrm_pll_init(np); + } else { + idx = (res.start & 0xf0) >> 5; + legacy_pll_init(np, CGA_PLL1 + idx); } +} - if (of_property_read_u32(np, "clock-frequency", &rate)) { - of_node_put(node); - return; +static struct clk *clockgen_clk_get(struct of_phandle_args *clkspec, void *data) +{ + struct clockgen *cg = data; + struct clk *clk; + struct clockgen_pll *pll; + u32 type, idx; + + if (clkspec->args_count < 2) { + pr_err("%s: insufficient phandle args\n", __func__); + return ERR_PTR(-EINVAL); } - of_property_read_string(np, "clock-output-names", &clk_name); + type = clkspec->args[0]; + idx = clkspec->args[1]; - clk = clk_register_fixed_rate(NULL, clk_name, NULL, CLK_IS_ROOT, rate); - if (!IS_ERR(clk)) - of_clk_add_provider(np, of_clk_src_simple_get, clk); + switch (type) { + case 0: + if (idx != 0) + goto bad_args; + clk = cg->sysclk; + break; + case 1: + if (idx >= ARRAY_SIZE(cg->cmux)) + goto bad_args; + clk = cg->cmux[idx]; + break; + case 2: + if (idx >= ARRAY_SIZE(cg->hwaccel)) + goto bad_args; + clk = cg->hwaccel[idx]; + break; + case 3: + if (idx >= ARRAY_SIZE(cg->fman)) + goto bad_args; + clk = cg->fman[idx]; + break; + case 4: + pll = &cg->pll[PLATFORM_PLL]; + if (idx >= ARRAY_SIZE(pll->div)) + goto bad_args; + clk = pll->div[idx].clk; + break; + default: + goto bad_args; + } + + if (!clk) + return ERR_PTR(-ENOENT); + return clk; + +bad_args: + pr_err("%s: Bad phandle args %u %u\n", __func__, type, idx); + return ERR_PTR(-EINVAL); } -static void __init pltfrm_pll_init(struct device_node *np) +#ifdef CONFIG_PPC +#include <asm/mpc85xx.h> + +static const u32 a4510_svrs[] __initconst = { + (SVR_P2040 << 8) | 0x10, /* P2040 1.0 */ + (SVR_P2040 << 8) | 0x11, /* P2040 1.1 */ + (SVR_P2041 << 8) | 0x10, /* P2041 1.0 */ + (SVR_P2041 << 8) | 0x11, /* P2041 1.1 */ + (SVR_P3041 << 8) | 0x10, /* P3041 1.0 */ + (SVR_P3041 << 8) | 0x11, /* P3041 1.1 */ + (SVR_P4040 << 8) | 0x20, /* P4040 2.0 */ + (SVR_P4080 << 8) | 0x20, /* P4080 2.0 */ + (SVR_P5010 << 8) | 0x10, /* P5010 1.0 */ + (SVR_P5010 << 8) | 0x20, /* P5010 2.0 */ + (SVR_P5020 << 8) | 0x10, /* P5020 1.0 */ + (SVR_P5021 << 8) | 0x10, /* P5021 1.0 */ + (SVR_P5040 << 8) | 0x10, /* P5040 1.0 */ +}; + +#define SVR_SECURITY 0x80000 /* The Security (E) bit */ + +static bool __init has_erratum_a4510(void) { - void __iomem *base; - uint32_t mult; - const char *parent_name, *clk_name; - int i, _errno; - struct clk_onecell_data *cod; + u32 svr = mfspr(SPRN_SVR); + int i; - base = of_iomap(np, 0); - if (!base) { - pr_err("%s(): %s: of_iomap() failed\n", __func__, np->name); - return; + svr &= ~SVR_SECURITY; + + for (i = 0; i < ARRAY_SIZE(a4510_svrs); i++) { + if (svr == a4510_svrs[i]) + return true; } - /* Get the multiple of PLL */ - mult = ioread32be(base); + return false; +} +#else +static bool __init has_erratum_a4510(void) +{ + return false; +} +#endif - iounmap(base); +static void __init clockgen_init(struct device_node *np) +{ + int i, ret; + bool is_old_ls1021a = false; - /* Check if this PLL is disabled */ - if (mult & PLL_KILL) { - pr_debug("%s(): %s: Disabled\n", __func__, np->name); + /* May have already been called by a legacy probe */ + if (clockgen.node) return; - } - mult = (mult & GENMASK(6, 1)) >> 1; - parent_name = of_clk_get_parent_name(np, 0); - if (!parent_name) { - pr_err("%s(): %s: of_clk_get_parent_name() failed\n", - __func__, np->name); + clockgen.node = np; + clockgen.regs = of_iomap(np, 0); + if (!clockgen.regs && + of_device_is_compatible(of_root, "fsl,ls1021a")) { + /* Compatibility hack for old, broken device trees */ + clockgen.regs = ioremap(0x1ee1000, 0x1000); + is_old_ls1021a = true; + } + if (!clockgen.regs) { + pr_err("%s(): %s: of_iomap() failed\n", __func__, np->name); return; } - i = of_property_count_strings(np, "clock-output-names"); - if (i < 0) { - pr_err("%s(): %s: of_property_count_strings(clock-output-names) = %d\n", - __func__, np->name, i); - return; + for (i = 0; i < ARRAY_SIZE(chipinfo); i++) { + if (of_device_is_compatible(np, chipinfo[i].compat)) + break; + if (is_old_ls1021a && + !strcmp(chipinfo[i].compat, "fsl,ls1021a-clockgen")) + break; } - cod = kmalloc(sizeof(*cod) + i * sizeof(struct clk *), GFP_KERNEL); - if (!cod) - return; - cod->clks = (struct clk **)(cod + 1); - cod->clk_num = i; - - for (i = 0; i < cod->clk_num; i++) { - _errno = of_property_read_string_index(np, "clock-output-names", - i, &clk_name); - if (_errno < 0) { - pr_err("%s(): %s: of_property_read_string_index(clock-output-names) = %d\n", - __func__, np->name, _errno); - goto return_clk_unregister; - } + if (i == ARRAY_SIZE(chipinfo)) { + pr_err("%s: unknown clockgen node %s\n", __func__, + np->full_name); + goto err; + } + clockgen.info = chipinfo[i]; + + if (clockgen.info.guts_compat) { + struct device_node *guts; - cod->clks[i] = clk_register_fixed_factor(NULL, clk_name, - parent_name, 0, mult, 1 + i); - if (IS_ERR(cod->clks[i])) { - pr_err("%s(): %s: clk_register_fixed_factor(%s) = %ld\n", - __func__, np->name, - clk_name, PTR_ERR(cod->clks[i])); - goto return_clk_unregister; + guts = of_find_compatible_node(NULL, NULL, + clockgen.info.guts_compat); + if (guts) { + clockgen.guts = of_iomap(guts, 0); + if (!clockgen.guts) { + pr_err("%s: Couldn't map %s regs\n", __func__, + guts->full_name); + } } + } - _errno = of_clk_add_provider(np, of_clk_src_onecell_get, cod); - if (_errno < 0) { - pr_err("%s(): %s: of_clk_add_provider() = %d\n", - __func__, np->name, _errno); - goto return_clk_unregister; + if (has_erratum_a4510()) + clockgen.info.flags |= CG_CMUX_GE_PLAT; + + clockgen.sysclk = create_sysclk("cg-sysclk"); + create_plls(&clockgen); + create_muxes(&clockgen); + + if (clockgen.info.init_periph) + clockgen.info.init_periph(&clockgen); + + ret = of_clk_add_provider(np, clockgen_clk_get, &clockgen); + if (ret) { + pr_err("%s: Couldn't register clk provider for node %s: %d\n", + __func__, np->name, ret); } return; - -return_clk_unregister: - while (--i >= 0) - clk_unregister(cod->clks[i]); - kfree(cod); +err: + iounmap(clockgen.regs); + clockgen.regs = NULL; } +CLK_OF_DECLARE(qoriq_clockgen_1, "fsl,qoriq-clockgen-1.0", clockgen_init); +CLK_OF_DECLARE(qoriq_clockgen_2, "fsl,qoriq-clockgen-2.0", clockgen_init); +CLK_OF_DECLARE(qoriq_clockgen_ls1021a, "fsl,ls1021a-clockgen", clockgen_init); +CLK_OF_DECLARE(qoriq_clockgen_ls1043a, "fsl,ls1043a-clockgen", clockgen_init); +CLK_OF_DECLARE(qoriq_clockgen_ls2080a, "fsl,ls2080a-clockgen", clockgen_init); + +/* Legacy nodes */ CLK_OF_DECLARE(qoriq_sysclk_1, "fsl,qoriq-sysclk-1.0", sysclk_init); CLK_OF_DECLARE(qoriq_sysclk_2, "fsl,qoriq-sysclk-2.0", sysclk_init); CLK_OF_DECLARE(qoriq_core_pll_1, "fsl,qoriq-core-pll-1.0", core_pll_init); diff --git a/drivers/iommu/fsl_pamu.c b/drivers/iommu/fsl_pamu.c index 2570f2a25dc4..a34355fca37a 100644 --- a/drivers/iommu/fsl_pamu.c +++ b/drivers/iommu/fsl_pamu.c @@ -20,11 +20,11 @@ #include "fsl_pamu.h" +#include <linux/fsl/guts.h> #include <linux/interrupt.h> #include <linux/genalloc.h> #include <asm/mpc85xx.h> -#include <asm/fsl_guts.h> /* define indexes for each operation mapping scenario */ #define OMI_QMAN 0x00 diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index 5844b80bd90e..3e8b29e41420 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -166,9 +166,8 @@ config INPUT_ADBHID Say Y here if you want to have ADB (Apple Desktop Bus) HID devices such as keyboards, mice, joysticks, trackpads or graphic tablets handled by the input layer. If you say Y here, make sure to say Y to - the corresponding drivers "Keyboard support" (CONFIG_INPUT_KEYBDEV), - "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and "Event interface - support" (CONFIG_INPUT_EVDEV) as well. + the corresponding drivers "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and + "Event interface support" (CONFIG_INPUT_EVDEV) as well. If unsure, say Y. diff --git a/drivers/misc/cxl/vphb.c b/drivers/misc/cxl/vphb.c index 94b520896b18..c241e15cacb1 100644 --- a/drivers/misc/cxl/vphb.c +++ b/drivers/misc/cxl/vphb.c @@ -290,8 +290,10 @@ void cxl_pci_vphb_remove(struct cxl_afu *afu) return; phb = afu->phb; + afu->phb = NULL; pci_remove_root_bus(phb->bus); + pcibios_free_controller(phb); } struct cxl_afu *cxl_pci_to_afu(struct pci_dev *dev) diff --git a/drivers/ps3/ps3-lpm.c b/drivers/ps3/ps3-lpm.c index cb7d3a67380d..e34de9a7d517 100644 --- a/drivers/ps3/ps3-lpm.c +++ b/drivers/ps3/ps3-lpm.c @@ -901,7 +901,7 @@ void ps3_disable_pm(u32 cpu) result = lv1_stop_lpm(lpm_priv->lpm_id, &tmp); if (result) { - if(result != LV1_WRONG_STATE) + if (result != LV1_WRONG_STATE) dev_err(sbd_core(), "%s:%u: lv1_stop_lpm failed: %s\n", __func__, __LINE__, ps3_result(result)); return; diff --git a/drivers/ps3/ps3-vuart.c b/drivers/ps3/ps3-vuart.c index d6db822bef84..632701a1d993 100644 --- a/drivers/ps3/ps3-vuart.c +++ b/drivers/ps3/ps3-vuart.c @@ -1000,12 +1000,11 @@ static int ps3_vuart_probe(struct ps3_system_bus_device *dev) dev_dbg(&dev->core, "%s:%d\n", __func__, __LINE__); drv = ps3_system_bus_dev_to_vuart_drv(dev); + BUG_ON(!drv); dev_dbg(&dev->core, "%s:%d: (%s)\n", __func__, __LINE__, drv->core.core.name); - BUG_ON(!drv); - if (dev->port_number >= PORT_COUNT) { BUG(); return -EINVAL; diff --git a/arch/powerpc/include/asm/fsl_guts.h b/include/linux/fsl/guts.h index 43b6bb1a4a9c..84d971ff3fba 100644 --- a/arch/powerpc/include/asm/fsl_guts.h +++ b/include/linux/fsl/guts.h @@ -12,9 +12,10 @@ * option) any later version. */ -#ifndef __ASM_POWERPC_FSL_GUTS_H__ -#define __ASM_POWERPC_FSL_GUTS_H__ -#ifdef __KERNEL__ +#ifndef __FSL_GUTS_H__ +#define __FSL_GUTS_H__ + +#include <linux/types.h> /** * Global Utility Registers. @@ -189,4 +190,3 @@ static inline void guts_set_pmuxcr_dma(struct ccsr_guts __iomem *guts, #endif #endif -#endif diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile index aceaaed09811..3043d6b0b51d 100644 --- a/scripts/kconfig/Makefile +++ b/scripts/kconfig/Makefile @@ -96,9 +96,12 @@ savedefconfig: $(obj)/conf defconfig: $(obj)/conf ifeq ($(KBUILD_DEFCONFIG),) $< $(silent) --defconfig $(Kconfig) -else +else ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG)),) @$(kecho) "*** Default configuration is based on '$(KBUILD_DEFCONFIG)'" $(Q)$< $(silent) --defconfig=arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG) $(Kconfig) +else + @$(kecho) "*** Default configuration is based on target '$(KBUILD_DEFCONFIG)'" + $(Q)$(MAKE) -f $(srctree)/Makefile $(KBUILD_DEFCONFIG) endif %_defconfig: $(obj)/conf diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c index 9621b9140df6..6f236f170cf5 100644 --- a/sound/soc/fsl/mpc8610_hpcd.c +++ b/sound/soc/fsl/mpc8610_hpcd.c @@ -12,11 +12,11 @@ #include <linux/module.h> #include <linux/interrupt.h> +#include <linux/fsl/guts.h> #include <linux/of_address.h> #include <linux/of_device.h> #include <linux/slab.h> #include <sound/soc.h> -#include <asm/fsl_guts.h> #include "fsl_dma.h" #include "fsl_ssi.h" diff --git a/sound/soc/fsl/p1022_ds.c b/sound/soc/fsl/p1022_ds.c index 71c1a7dc3aeb..747aab0602bd 100644 --- a/sound/soc/fsl/p1022_ds.c +++ b/sound/soc/fsl/p1022_ds.c @@ -11,12 +11,12 @@ */ #include <linux/module.h> +#include <linux/fsl/guts.h> #include <linux/interrupt.h> #include <linux/of_address.h> #include <linux/of_device.h> #include <linux/slab.h> #include <sound/soc.h> -#include <asm/fsl_guts.h> #include "fsl_dma.h" #include "fsl_ssi.h" diff --git a/sound/soc/fsl/p1022_rdk.c b/sound/soc/fsl/p1022_rdk.c index ee29048424be..1dd49e5f9675 100644 --- a/sound/soc/fsl/p1022_rdk.c +++ b/sound/soc/fsl/p1022_rdk.c @@ -18,12 +18,12 @@ */ #include <linux/module.h> +#include <linux/fsl/guts.h> #include <linux/interrupt.h> #include <linux/of_address.h> #include <linux/of_device.h> #include <linux/slab.h> #include <sound/soc.h> -#include <asm/fsl_guts.h> #include "fsl_dma.h" #include "fsl_ssi.h" diff --git a/tools/testing/selftests/powerpc/Makefile b/tools/testing/selftests/powerpc/Makefile index 03ca2e64b3fc..0c2706bda330 100644 --- a/tools/testing/selftests/powerpc/Makefile +++ b/tools/testing/selftests/powerpc/Makefile @@ -12,7 +12,17 @@ CFLAGS := -Wall -O2 -flto -Wall -Werror -DGIT_VERSION='"$(GIT_VERSION)"' -I$(CUR export CFLAGS -SUB_DIRS = pmu copyloops mm tm primitives stringloops vphn switch_endian dscr +SUB_DIRS = benchmarks \ + copyloops \ + dscr \ + mm \ + pmu \ + primitives \ + stringloops \ + switch_endian \ + syscalls \ + tm \ + vphn endif diff --git a/tools/testing/selftests/powerpc/benchmarks/.gitignore b/tools/testing/selftests/powerpc/benchmarks/.gitignore new file mode 100644 index 000000000000..b4709ea588c1 --- /dev/null +++ b/tools/testing/selftests/powerpc/benchmarks/.gitignore @@ -0,0 +1 @@ +gettimeofday diff --git a/tools/testing/selftests/powerpc/benchmarks/Makefile b/tools/testing/selftests/powerpc/benchmarks/Makefile new file mode 100644 index 000000000000..5fa48702070d --- /dev/null +++ b/tools/testing/selftests/powerpc/benchmarks/Makefile @@ -0,0 +1,12 @@ +TEST_PROGS := gettimeofday + +CFLAGS += -O2 + +all: $(TEST_PROGS) + +$(TEST_PROGS): ../harness.c + +include ../../lib.mk + +clean: + rm -f $(TEST_PROGS) *.o diff --git a/tools/testing/selftests/powerpc/benchmarks/gettimeofday.c b/tools/testing/selftests/powerpc/benchmarks/gettimeofday.c new file mode 100644 index 000000000000..3af3c21e8036 --- /dev/null +++ b/tools/testing/selftests/powerpc/benchmarks/gettimeofday.c @@ -0,0 +1,31 @@ +/* + * Copyright 2015, Anton Blanchard, IBM Corp. + * Licensed under GPLv2. + */ + +#include <sys/time.h> +#include <stdio.h> + +#include "utils.h" + +static int test_gettimeofday(void) +{ + int i; + + struct timeval tv_start, tv_end; + + gettimeofday(&tv_start, NULL); + + for(i = 0; i < 100000000; i++) { + gettimeofday(&tv_end, NULL); + } + + printf("time = %.6f\n", tv_end.tv_sec - tv_start.tv_sec + (tv_end.tv_usec - tv_start.tv_usec) * 1e-6); + + return 0; +} + +int main(void) +{ + return test_harness(test_gettimeofday, "gettimeofday"); +} diff --git a/tools/testing/selftests/powerpc/pmu/ebb/back_to_back_ebbs_test.c b/tools/testing/selftests/powerpc/pmu/ebb/back_to_back_ebbs_test.c index 66ea765c0e72..94110b1dcd3d 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/back_to_back_ebbs_test.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/back_to_back_ebbs_test.c @@ -63,6 +63,8 @@ int back_to_back_ebbs(void) { struct event event; + SKIP_IF(!ebb_is_supported()); + event_init_named(&event, 0x1001e, "cycles"); event_leader_ebb_init(&event); diff --git a/tools/testing/selftests/powerpc/pmu/ebb/close_clears_pmcc_test.c b/tools/testing/selftests/powerpc/pmu/ebb/close_clears_pmcc_test.c index 0f0423dba18b..ac18cf617dd6 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/close_clears_pmcc_test.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/close_clears_pmcc_test.c @@ -20,6 +20,8 @@ int close_clears_pmcc(void) { struct event event; + SKIP_IF(!ebb_is_supported()); + event_init_named(&event, 0x1001e, "cycles"); event_leader_ebb_init(&event); diff --git a/tools/testing/selftests/powerpc/pmu/ebb/cpu_event_pinned_vs_ebb_test.c b/tools/testing/selftests/powerpc/pmu/ebb/cpu_event_pinned_vs_ebb_test.c index d3ed64d5d6c0..f0632e7fdf29 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/cpu_event_pinned_vs_ebb_test.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/cpu_event_pinned_vs_ebb_test.c @@ -43,6 +43,8 @@ int cpu_event_pinned_vs_ebb(void) int cpu, rc; pid_t pid; + SKIP_IF(!ebb_is_supported()); + cpu = pick_online_cpu(); FAIL_IF(cpu < 0); FAIL_IF(bind_to_cpu(cpu)); diff --git a/tools/testing/selftests/powerpc/pmu/ebb/cpu_event_vs_ebb_test.c b/tools/testing/selftests/powerpc/pmu/ebb/cpu_event_vs_ebb_test.c index 8b972c2aa392..33e56a2342e5 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/cpu_event_vs_ebb_test.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/cpu_event_vs_ebb_test.c @@ -41,6 +41,8 @@ int cpu_event_vs_ebb(void) int cpu, rc; pid_t pid; + SKIP_IF(!ebb_is_supported()); + cpu = pick_online_cpu(); FAIL_IF(cpu < 0); FAIL_IF(bind_to_cpu(cpu)); diff --git a/tools/testing/selftests/powerpc/pmu/ebb/cycles_test.c b/tools/testing/selftests/powerpc/pmu/ebb/cycles_test.c index 8590fc1bfc0d..7c57a8d79535 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/cycles_test.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/cycles_test.c @@ -16,6 +16,8 @@ int cycles(void) { struct event event; + SKIP_IF(!ebb_is_supported()); + event_init_named(&event, 0x1001e, "cycles"); event_leader_ebb_init(&event); diff --git a/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_freeze_test.c b/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_freeze_test.c index 754b3f2008d3..ecf5ee3283a3 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_freeze_test.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_freeze_test.c @@ -56,6 +56,8 @@ int cycles_with_freeze(void) uint64_t val; bool fc_cleared; + SKIP_IF(!ebb_is_supported()); + event_init_named(&event, 0x1001e, "cycles"); event_leader_ebb_init(&event); diff --git a/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_mmcr2_test.c b/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_mmcr2_test.c index d43029b0800c..c0faba520b35 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_mmcr2_test.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_mmcr2_test.c @@ -26,6 +26,8 @@ int cycles_with_mmcr2(void) int i; bool bad_mmcr2; + SKIP_IF(!ebb_is_supported()); + event_init_named(&event, 0x1001e, "cycles"); event_leader_ebb_init(&event); diff --git a/tools/testing/selftests/powerpc/pmu/ebb/ebb.c b/tools/testing/selftests/powerpc/pmu/ebb/ebb.c index d7a72ce696b5..9729d9f90218 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/ebb.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/ebb.c @@ -13,6 +13,7 @@ #include <stdlib.h> #include <string.h> #include <sys/ioctl.h> +#include <linux/auxvec.h> #include "trace.h" #include "reg.h" @@ -319,6 +320,16 @@ void ebb_global_disable(void) mb(); } +bool ebb_is_supported(void) +{ +#ifdef PPC_FEATURE2_EBB + /* EBB requires at least POWER8 */ + return ((long)get_auxv_entry(AT_HWCAP2) & PPC_FEATURE2_EBB); +#else + return false; +#endif +} + void event_ebb_init(struct event *e) { e->attr.config |= (1ull << 63); diff --git a/tools/testing/selftests/powerpc/pmu/ebb/ebb.h b/tools/testing/selftests/powerpc/pmu/ebb/ebb.h index e44eee5d97ca..f87e761f82d0 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/ebb.h +++ b/tools/testing/selftests/powerpc/pmu/ebb/ebb.h @@ -52,6 +52,7 @@ void standard_ebb_callee(void); int ebb_event_enable(struct event *e); void ebb_global_enable(void); void ebb_global_disable(void); +bool ebb_is_supported(void); void ebb_freeze_pmcs(void); void ebb_unfreeze_pmcs(void); void event_ebb_init(struct event *e); diff --git a/tools/testing/selftests/powerpc/pmu/ebb/ebb_on_child_test.c b/tools/testing/selftests/powerpc/pmu/ebb/ebb_on_child_test.c index c45f948148e1..1e7b7fe2396b 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/ebb_on_child_test.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/ebb_on_child_test.c @@ -47,6 +47,8 @@ int ebb_on_child(void) struct event event; pid_t pid; + SKIP_IF(!ebb_is_supported()); + FAIL_IF(pipe(read_pipe.fds) == -1); FAIL_IF(pipe(write_pipe.fds) == -1); diff --git a/tools/testing/selftests/powerpc/pmu/ebb/ebb_on_willing_child_test.c b/tools/testing/selftests/powerpc/pmu/ebb/ebb_on_willing_child_test.c index 11acf1d55f8d..a991d2ea8d0a 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/ebb_on_willing_child_test.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/ebb_on_willing_child_test.c @@ -54,6 +54,8 @@ int ebb_on_willing_child(void) struct event event; pid_t pid; + SKIP_IF(!ebb_is_supported()); + FAIL_IF(pipe(read_pipe.fds) == -1); FAIL_IF(pipe(write_pipe.fds) == -1); diff --git a/tools/testing/selftests/powerpc/pmu/ebb/ebb_vs_cpu_event_test.c b/tools/testing/selftests/powerpc/pmu/ebb/ebb_vs_cpu_event_test.c index be4dd5a4e98e..af20a2b363aa 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/ebb_vs_cpu_event_test.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/ebb_vs_cpu_event_test.c @@ -41,6 +41,8 @@ int ebb_vs_cpu_event(void) int cpu, rc; pid_t pid; + SKIP_IF(!ebb_is_supported()); + cpu = pick_online_cpu(); FAIL_IF(cpu < 0); FAIL_IF(bind_to_cpu(cpu)); diff --git a/tools/testing/selftests/powerpc/pmu/ebb/event_attributes_test.c b/tools/testing/selftests/powerpc/pmu/ebb/event_attributes_test.c index 7e78153f08eb..7762ab26e5ac 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/event_attributes_test.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/event_attributes_test.c @@ -16,6 +16,8 @@ int event_attributes(void) { struct event event, leader; + SKIP_IF(!ebb_is_supported()); + event_init(&event, 0x1001e); event_leader_ebb_init(&event); /* Expected to succeed */ diff --git a/tools/testing/selftests/powerpc/pmu/ebb/fork_cleanup_test.c b/tools/testing/selftests/powerpc/pmu/ebb/fork_cleanup_test.c index 9e7af6e76622..167135bd92a8 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/fork_cleanup_test.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/fork_cleanup_test.c @@ -44,6 +44,8 @@ int fork_cleanup(void) { pid_t pid; + SKIP_IF(!ebb_is_supported()); + event_init_named(&event, 0x1001e, "cycles"); event_leader_ebb_init(&event); diff --git a/tools/testing/selftests/powerpc/pmu/ebb/instruction_count_test.c b/tools/testing/selftests/powerpc/pmu/ebb/instruction_count_test.c index f8190fa29592..5da355135df2 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/instruction_count_test.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/instruction_count_test.c @@ -111,6 +111,8 @@ int instruction_count(void) struct event event; uint64_t overhead; + SKIP_IF(!ebb_is_supported()); + event_init_named(&event, 0x400FA, "PM_RUN_INST_CMPL"); event_leader_ebb_init(&event); event.attr.exclude_kernel = 1; diff --git a/tools/testing/selftests/powerpc/pmu/ebb/lost_exception_test.c b/tools/testing/selftests/powerpc/pmu/ebb/lost_exception_test.c index 0c9dd9b2e39d..eb8acb78bc6c 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/lost_exception_test.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/lost_exception_test.c @@ -23,6 +23,8 @@ static int test_body(void) int i, orig_period, max_period; struct event event; + SKIP_IF(!ebb_is_supported()); + /* We use PMC4 to make sure the kernel switches all counters correctly */ event_init_named(&event, 0x40002, "instructions"); event_leader_ebb_init(&event); diff --git a/tools/testing/selftests/powerpc/pmu/ebb/multi_counter_test.c b/tools/testing/selftests/powerpc/pmu/ebb/multi_counter_test.c index 67d78af3284c..6ff8c8ff27d6 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/multi_counter_test.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/multi_counter_test.c @@ -18,6 +18,8 @@ int multi_counter(void) struct event events[6]; int i, group_fd; + SKIP_IF(!ebb_is_supported()); + event_init_named(&events[0], 0x1001C, "PM_CMPLU_STALL_THRD"); event_init_named(&events[1], 0x2D016, "PM_CMPLU_STALL_FXU"); event_init_named(&events[2], 0x30006, "PM_CMPLU_STALL_OTHER_CMPL"); diff --git a/tools/testing/selftests/powerpc/pmu/ebb/multi_ebb_procs_test.c b/tools/testing/selftests/powerpc/pmu/ebb/multi_ebb_procs_test.c index b8dc371f9338..037cb6154f36 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/multi_ebb_procs_test.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/multi_ebb_procs_test.c @@ -79,6 +79,8 @@ int multi_ebb_procs(void) pid_t pids[NR_CHILDREN]; int cpu, rc, i; + SKIP_IF(!ebb_is_supported()); + cpu = pick_online_cpu(); FAIL_IF(cpu < 0); FAIL_IF(bind_to_cpu(cpu)); diff --git a/tools/testing/selftests/powerpc/pmu/ebb/no_handler_test.c b/tools/testing/selftests/powerpc/pmu/ebb/no_handler_test.c index 2f9bf8edfa60..8341d7778d5e 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/no_handler_test.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/no_handler_test.c @@ -19,6 +19,8 @@ static int no_handler_test(void) u64 val; int i; + SKIP_IF(!ebb_is_supported()); + event_init_named(&event, 0x1001e, "cycles"); event_leader_ebb_init(&event); diff --git a/tools/testing/selftests/powerpc/pmu/ebb/pmae_handling_test.c b/tools/testing/selftests/powerpc/pmu/ebb/pmae_handling_test.c index 986500fd2131..c5fa64790c22 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/pmae_handling_test.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/pmae_handling_test.c @@ -58,6 +58,8 @@ static int test_body(void) { struct event event; + SKIP_IF(!ebb_is_supported()); + event_init_named(&event, 0x1001e, "cycles"); event_leader_ebb_init(&event); diff --git a/tools/testing/selftests/powerpc/pmu/ebb/pmc56_overflow_test.c b/tools/testing/selftests/powerpc/pmu/ebb/pmc56_overflow_test.c index a503fa70c950..c22860ab9733 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/pmc56_overflow_test.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/pmc56_overflow_test.c @@ -49,6 +49,8 @@ int pmc56_overflow(void) { struct event event; + SKIP_IF(!ebb_is_supported()); + /* Use PMC2 so we set PMCjCE, which enables PMC5/6 */ event_init(&event, 0x2001e); event_leader_ebb_init(&event); diff --git a/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test.c b/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test.c index 0cae66f659a3..5b1188f10c15 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test.c @@ -18,6 +18,8 @@ int reg_access(void) { uint64_t val, expected; + SKIP_IF(!ebb_is_supported()); + expected = 0x8000000100000000ull; mtspr(SPRN_BESCR, expected); val = mfspr(SPRN_BESCR); diff --git a/tools/testing/selftests/powerpc/pmu/ebb/task_event_pinned_vs_ebb_test.c b/tools/testing/selftests/powerpc/pmu/ebb/task_event_pinned_vs_ebb_test.c index d56607e4ffab..1846f4e84635 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/task_event_pinned_vs_ebb_test.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/task_event_pinned_vs_ebb_test.c @@ -42,6 +42,8 @@ int task_event_pinned_vs_ebb(void) pid_t pid; int rc; + SKIP_IF(!ebb_is_supported()); + FAIL_IF(pipe(read_pipe.fds) == -1); FAIL_IF(pipe(write_pipe.fds) == -1); diff --git a/tools/testing/selftests/powerpc/pmu/ebb/task_event_vs_ebb_test.c b/tools/testing/selftests/powerpc/pmu/ebb/task_event_vs_ebb_test.c index eba32196dbbf..e3bc6e92a6a5 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/task_event_vs_ebb_test.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/task_event_vs_ebb_test.c @@ -40,6 +40,8 @@ int task_event_vs_ebb(void) pid_t pid; int rc; + SKIP_IF(!ebb_is_supported()); + FAIL_IF(pipe(read_pipe.fds) == -1); FAIL_IF(pipe(write_pipe.fds) == -1); diff --git a/tools/testing/selftests/powerpc/syscalls/.gitignore b/tools/testing/selftests/powerpc/syscalls/.gitignore new file mode 100644 index 000000000000..f0f3fcc9d802 --- /dev/null +++ b/tools/testing/selftests/powerpc/syscalls/.gitignore @@ -0,0 +1 @@ +ipc_unmuxed diff --git a/tools/testing/selftests/powerpc/syscalls/Makefile b/tools/testing/selftests/powerpc/syscalls/Makefile new file mode 100644 index 000000000000..b35c7945bec5 --- /dev/null +++ b/tools/testing/selftests/powerpc/syscalls/Makefile @@ -0,0 +1,12 @@ +TEST_PROGS := ipc_unmuxed + +CFLAGS += -I../../../../../usr/include + +all: $(TEST_PROGS) + +$(TEST_PROGS): ../harness.c + +include ../../lib.mk + +clean: + rm -f $(TEST_PROGS) *.o diff --git a/tools/testing/selftests/powerpc/syscalls/ipc.h b/tools/testing/selftests/powerpc/syscalls/ipc.h new file mode 100644 index 000000000000..fbebc022edf6 --- /dev/null +++ b/tools/testing/selftests/powerpc/syscalls/ipc.h @@ -0,0 +1,47 @@ +#ifdef __NR_semop +DO_TEST(semop, __NR_semop) +#endif + +#ifdef __NR_semget +DO_TEST(semget, __NR_semget) +#endif + +#ifdef __NR_semctl +DO_TEST(semctl, __NR_semctl) +#endif + +#ifdef __NR_semtimedop +DO_TEST(semtimedop, __NR_semtimedop) +#endif + +#ifdef __NR_msgsnd +DO_TEST(msgsnd, __NR_msgsnd) +#endif + +#ifdef __NR_msgrcv +DO_TEST(msgrcv, __NR_msgrcv) +#endif + +#ifdef __NR_msgget +DO_TEST(msgget, __NR_msgget) +#endif + +#ifdef __NR_msgctl +DO_TEST(msgctl, __NR_msgctl) +#endif + +#ifdef __NR_shmat +DO_TEST(shmat, __NR_shmat) +#endif + +#ifdef __NR_shmdt +DO_TEST(shmdt, __NR_shmdt) +#endif + +#ifdef __NR_shmget +DO_TEST(shmget, __NR_shmget) +#endif + +#ifdef __NR_shmctl +DO_TEST(shmctl, __NR_shmctl) +#endif diff --git a/tools/testing/selftests/powerpc/syscalls/ipc_unmuxed.c b/tools/testing/selftests/powerpc/syscalls/ipc_unmuxed.c new file mode 100644 index 000000000000..2ac02706f8c8 --- /dev/null +++ b/tools/testing/selftests/powerpc/syscalls/ipc_unmuxed.c @@ -0,0 +1,61 @@ +/* + * Copyright 2015, Michael Ellerman, IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * This test simply tests that certain syscalls are implemented. It doesn't + * actually exercise their logic in any way. + */ + +#define _GNU_SOURCE +#include <errno.h> +#include <stdio.h> +#include <unistd.h> +#include <sys/syscall.h> + +#include "utils.h" + + +#define DO_TEST(_name, _num) \ +static int test_##_name(void) \ +{ \ + int rc; \ + printf("Testing " #_name); \ + errno = 0; \ + rc = syscall(_num, -1, 0, 0, 0, 0, 0); \ + printf("\treturned %d, errno %d\n", rc, errno); \ + return errno == ENOSYS; \ +} + +#include "ipc.h" +#undef DO_TEST + +static int ipc_unmuxed(void) +{ + int tests_done = 0; + +#define DO_TEST(_name, _num) \ + FAIL_IF(test_##_name()); \ + tests_done++; + +#include "ipc.h" +#undef DO_TEST + + /* + * If we ran no tests then it means none of the syscall numbers were + * defined, possibly because we were built against old headers. But it + * means we didn't really test anything, so instead of passing mark it + * as a skip to give the user a clue. + */ + SKIP_IF(tests_done == 0); + + return 0; +} + +int main(void) +{ + return test_harness(ipc_unmuxed, "ipc_unmuxed"); +} diff --git a/tools/testing/selftests/powerpc/tm/tm-syscall.c b/tools/testing/selftests/powerpc/tm/tm-syscall.c index 1276e23da63b..e835bf7ec7ae 100644 --- a/tools/testing/selftests/powerpc/tm/tm-syscall.c +++ b/tools/testing/selftests/powerpc/tm/tm-syscall.c @@ -77,13 +77,23 @@ pid_t getppid_tm(bool suspend) exit(-1); } +static inline bool have_htm_nosc(void) +{ +#ifdef PPC_FEATURE2_HTM_NOSC + return ((long)get_auxv_entry(AT_HWCAP2) & PPC_FEATURE2_HTM_NOSC); +#else + printf("PPC_FEATURE2_HTM_NOSC not defined, can't check AT_HWCAP2\n"); + return false; +#endif +} + int tm_syscall(void) { unsigned count = 0; struct timeval end, now; - SKIP_IF(!((long)get_auxv_entry(AT_HWCAP2) - & PPC_FEATURE2_HTM_NOSC)); + SKIP_IF(!have_htm_nosc()); + setbuf(stdout, NULL); printf("Testing transactional syscalls for %d seconds...\n", TEST_DURATION); |