diff options
| -rw-r--r-- | drivers/phy/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/phy/Makefile | 1 | ||||
| -rw-r--r-- | drivers/phy/phy-pxa-28nm-usb2.c | 355 |
3 files changed, 366 insertions, 0 deletions
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 15cab070f582..e3785e1ac91e 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -54,6 +54,16 @@ config PHY_EXYNOS_MIPI_VIDEO Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P and EXYNOS SoCs. +config PHY_PXA_28NM_USB2 + tristate "Marvell USB 2.0 28nm PHY Driver" + select GENERIC_PHY + help + Enable this to support Marvell USB 2.0 PHY driver for Marvell + SoC. This driver will do the PHY initialization and shutdown. + The PHY driver will be used by Marvell udc/ehci/otg driver. + + To compile this driver as a module, choose M here. + config PHY_MVEBU_SATA def_bool y depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index bc92b427e5ca..f2670df66c07 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o +obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o obj-$(CONFIG_PHY_MIPHY365X) += phy-miphy365x.o diff --git a/drivers/phy/phy-pxa-28nm-usb2.c b/drivers/phy/phy-pxa-28nm-usb2.c new file mode 100644 index 000000000000..37e9c8ca4983 --- /dev/null +++ b/drivers/phy/phy-pxa-28nm-usb2.c @@ -0,0 +1,355 @@ +/* + * Copyright (C) 2015 Linaro, Ltd. + * Rob Herring <robh@kernel.org> + * + * Based on vendor driver: + * Copyright (C) 2013 Marvell Inc. + * Author: Chao Xie <xiechao.mail@gmail.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/phy/phy.h> + +/* USB PXA1928 PHY mapping */ +#define PHY_28NM_PLL_REG0 0x0 +#define PHY_28NM_PLL_REG1 0x4 +#define PHY_28NM_CAL_REG 0x8 +#define PHY_28NM_TX_REG0 0x0c +#define PHY_28NM_TX_REG1 0x10 +#define PHY_28NM_RX_REG0 0x14 +#define PHY_28NM_RX_REG1 0x18 +#define PHY_28NM_DIG_REG0 0x1c +#define PHY_28NM_DIG_REG1 0x20 +#define PHY_28NM_TEST_REG0 0x24 +#define PHY_28NM_TEST_REG1 0x28 +#define PHY_28NM_MOC_REG 0x2c +#define PHY_28NM_PHY_RESERVE 0x30 +#define PHY_28NM_OTG_REG 0x34 +#define PHY_28NM_CHRG_DET 0x38 +#define PHY_28NM_CTRL_REG0 0xc4 +#define PHY_28NM_CTRL_REG1 0xc8 +#define PHY_28NM_CTRL_REG2 0xd4 +#define PHY_28NM_CTRL_REG3 0xdc + +/* PHY_28NM_PLL_REG0 */ +#define PHY_28NM_PLL_READY BIT(31) + +#define PHY_28NM_PLL_SELLPFR_SHIFT 28 +#define PHY_28NM_PLL_SELLPFR_MASK (0x3 << 28) + +#define PHY_28NM_PLL_FBDIV_SHIFT 16 +#define PHY_28NM_PLL_FBDIV_MASK (0x1ff << 16) + +#define PHY_28NM_PLL_ICP_SHIFT 8 +#define PHY_28NM_PLL_ICP_MASK (0x7 << 8) + +#define PHY_28NM_PLL_REFDIV_SHIFT 0 +#define PHY_28NM_PLL_REFDIV_MASK 0x7f + +/* PHY_28NM_PLL_REG1 */ +#define PHY_28NM_PLL_PU_BY_REG BIT(1) + +#define PHY_28NM_PLL_PU_PLL BIT(0) + +/* PHY_28NM_CAL_REG */ +#define PHY_28NM_PLL_PLLCAL_DONE BIT(31) + +#define PHY_28NM_PLL_IMPCAL_DONE BIT(23) + +#define PHY_28NM_PLL_KVCO_SHIFT 16 +#define PHY_28NM_PLL_KVCO_MASK (0x7 << 16) + +#define PHY_28NM_PLL_CAL12_SHIFT 20 +#define PHY_28NM_PLL_CAL12_MASK (0x3 << 20) + +#define PHY_28NM_IMPCAL_VTH_SHIFT 8 +#define PHY_28NM_IMPCAL_VTH_MASK (0x7 << 8) + +#define PHY_28NM_PLLCAL_START_SHIFT 22 +#define PHY_28NM_IMPCAL_START_SHIFT 13 + +/* PHY_28NM_TX_REG0 */ +#define PHY_28NM_TX_PU_BY_REG BIT(25) + +#define PHY_28NM_TX_PU_ANA BIT(24) + +#define PHY_28NM_TX_AMP_SHIFT 20 +#define PHY_28NM_TX_AMP_MASK (0x7 << 20) + +/* PHY_28NM_RX_REG0 */ +#define PHY_28NM_RX_SQ_THRESH_SHIFT 0 +#define PHY_28NM_RX_SQ_THRESH_MASK (0xf << 0) + +/* PHY_28NM_RX_REG1 */ +#define PHY_28NM_RX_SQCAL_DONE BIT(31) + +/* PHY_28NM_DIG_REG0 */ +#define PHY_28NM_DIG_BITSTAFFING_ERR BIT(31) +#define PHY_28NM_DIG_SYNC_ERR BIT(30) + +#define PHY_28NM_DIG_SQ_FILT_SHIFT 16 +#define PHY_28NM_DIG_SQ_FILT_MASK (0x7 << 16) + +#define PHY_28NM_DIG_SQ_BLK_SHIFT 12 +#define PHY_28NM_DIG_SQ_BLK_MASK (0x7 << 12) + +#define PHY_28NM_DIG_SYNC_NUM_SHIFT 0 +#define PHY_28NM_DIG_SYNC_NUM_MASK (0x3 << 0) + +#define PHY_28NM_PLL_LOCK_BYPASS BIT(7) + +/* PHY_28NM_OTG_REG */ +#define PHY_28NM_OTG_CONTROL_BY_PIN BIT(5) +#define PHY_28NM_OTG_PU_OTG BIT(4) + +#define PHY_28NM_CHGDTC_ENABLE_SWITCH_DM_SHIFT_28 13 +#define PHY_28NM_CHGDTC_ENABLE_SWITCH_DP_SHIFT_28 12 +#define PHY_28NM_CHGDTC_VSRC_CHARGE_SHIFT_28 10 +#define PHY_28NM_CHGDTC_VDAT_CHARGE_SHIFT_28 8 +#define PHY_28NM_CHGDTC_CDP_DM_AUTO_SWITCH_SHIFT_28 7 +#define PHY_28NM_CHGDTC_DP_DM_SWAP_SHIFT_28 6 +#define PHY_28NM_CHGDTC_PU_CHRG_DTC_SHIFT_28 5 +#define PHY_28NM_CHGDTC_PD_EN_SHIFT_28 4 +#define PHY_28NM_CHGDTC_DCP_EN_SHIFT_28 3 +#define PHY_28NM_CHGDTC_CDP_EN_SHIFT_28 2 +#define PHY_28NM_CHGDTC_TESTMON_CHRGDTC_SHIFT_28 0 + +#define PHY_28NM_CTRL1_CHRG_DTC_OUT_SHIFT_28 4 +#define PHY_28NM_CTRL1_VBUSDTC_OUT_SHIFT_28 2 + +#define PHY_28NM_CTRL3_OVERWRITE BIT(0) +#define PHY_28NM_CTRL3_VBUS_VALID BIT(4) +#define PHY_28NM_CTRL3_AVALID BIT(5) +#define PHY_28NM_CTRL3_BVALID BIT(6) + +struct mv_usb2_phy { + struct phy *phy; + struct platform_device *pdev; + void __iomem *base; + struct clk *clk; +}; + +static bool wait_for_reg(void __iomem *reg, u32 mask, unsigned long timeout) +{ + timeout += jiffies; + while (time_is_after_eq_jiffies(timeout)) { + if ((readl(reg) & mask) == mask) + return true; + msleep(1); + } + return false; +} + +static int mv_usb2_phy_28nm_init(struct phy *phy) +{ + struct mv_usb2_phy *mv_phy = phy_get_drvdata(phy); + struct platform_device *pdev = mv_phy->pdev; + void __iomem *base = mv_phy->base; + u32 reg; + int ret; + + clk_prepare_enable(mv_phy->clk); + + /* PHY_28NM_PLL_REG0 */ + reg = readl(base + PHY_28NM_PLL_REG0) & + ~(PHY_28NM_PLL_SELLPFR_MASK | PHY_28NM_PLL_FBDIV_MASK + | PHY_28NM_PLL_ICP_MASK | PHY_28NM_PLL_REFDIV_MASK); + writel(reg | (0x1 << PHY_28NM_PLL_SELLPFR_SHIFT + | 0xf0 << PHY_28NM_PLL_FBDIV_SHIFT + | 0x3 << PHY_28NM_PLL_ICP_SHIFT + | 0xd << PHY_28NM_PLL_REFDIV_SHIFT), + base + PHY_28NM_PLL_REG0); + + /* PHY_28NM_PLL_REG1 */ + reg = readl(base + PHY_28NM_PLL_REG1); + writel(reg | PHY_28NM_PLL_PU_PLL | PHY_28NM_PLL_PU_BY_REG, + base + PHY_28NM_PLL_REG1); + + /* PHY_28NM_TX_REG0 */ + reg = readl(base + PHY_28NM_TX_REG0) & ~PHY_28NM_TX_AMP_MASK; + writel(reg | PHY_28NM_TX_PU_BY_REG | 0x3 << PHY_28NM_TX_AMP_SHIFT | + PHY_28NM_TX_PU_ANA, + base + PHY_28NM_TX_REG0); + + /* PHY_28NM_RX_REG0 */ + reg = readl(base + PHY_28NM_RX_REG0) & ~PHY_28NM_RX_SQ_THRESH_MASK; + writel(reg | 0xa << PHY_28NM_RX_SQ_THRESH_SHIFT, + base + PHY_28NM_RX_REG0); + + /* PHY_28NM_DIG_REG0 */ + reg = readl(base + PHY_28NM_DIG_REG0) & + ~(PHY_28NM_DIG_BITSTAFFING_ERR | PHY_28NM_DIG_SYNC_ERR | + PHY_28NM_DIG_SQ_FILT_MASK | PHY_28NM_DIG_SQ_BLK_MASK | + PHY_28NM_DIG_SYNC_NUM_MASK); + writel(reg | (0x1 << PHY_28NM_DIG_SYNC_NUM_SHIFT | + PHY_28NM_PLL_LOCK_BYPASS), + base + PHY_28NM_DIG_REG0); + + /* PHY_28NM_OTG_REG */ + reg = readl(base + PHY_28NM_OTG_REG) | PHY_28NM_OTG_PU_OTG; + writel(reg & ~PHY_28NM_OTG_CONTROL_BY_PIN, base + PHY_28NM_OTG_REG); + + /* + * Calibration Timing + * ____________________________ + * CAL START ___| + * ____________________ + * CAL_DONE ___________| + * | 400us | + */ + + /* Make sure PHY Calibration is ready */ + if (!wait_for_reg(base + PHY_28NM_CAL_REG, + PHY_28NM_PLL_PLLCAL_DONE | PHY_28NM_PLL_IMPCAL_DONE, + HZ / 10)) { + dev_warn(&pdev->dev, "USB PHY PLL calibrate not done after 100mS."); + ret = -ETIMEDOUT; + goto err_clk; + } + if (!wait_for_reg(base + PHY_28NM_RX_REG1, + PHY_28NM_RX_SQCAL_DONE, HZ / 10)) { + dev_warn(&pdev->dev, "USB PHY RX SQ calibrate not done after 100mS."); + ret = -ETIMEDOUT; + goto err_clk; + } + /* Make sure PHY PLL is ready */ + if (!wait_for_reg(base + PHY_28NM_PLL_REG0, + PHY_28NM_PLL_READY, HZ / 10)) { + dev_warn(&pdev->dev, "PLL_READY not set after 100mS."); + ret = -ETIMEDOUT; + goto err_clk; + } + + return 0; +err_clk: + clk_disable_unprepare(mv_phy->clk); + return ret; +} + +static int mv_usb2_phy_28nm_power_on(struct phy *phy) +{ + struct mv_usb2_phy *mv_phy = phy_get_drvdata(phy); + void __iomem *base = mv_phy->base; + + writel(readl(base + PHY_28NM_CTRL_REG3) | + (PHY_28NM_CTRL3_OVERWRITE | PHY_28NM_CTRL3_VBUS_VALID | + PHY_28NM_CTRL3_AVALID | PHY_28NM_CTRL3_BVALID), + base + PHY_28NM_CTRL_REG3); + + return 0; +} + +static int mv_usb2_phy_28nm_power_off(struct phy *phy) +{ + struct mv_usb2_phy *mv_phy = phy_get_drvdata(phy); + void __iomem *base = mv_phy->base; + + writel(readl(base + PHY_28NM_CTRL_REG3) | + ~(PHY_28NM_CTRL3_OVERWRITE | PHY_28NM_CTRL3_VBUS_VALID + | PHY_28NM_CTRL3_AVALID | PHY_28NM_CTRL3_BVALID), + base + PHY_28NM_CTRL_REG3); + + return 0; +} + +static int mv_usb2_phy_28nm_exit(struct phy *phy) +{ + struct mv_usb2_phy *mv_phy = phy_get_drvdata(phy); + void __iomem *base = mv_phy->base; + unsigned int val; + + val = readw(base + PHY_28NM_PLL_REG1); + val &= ~PHY_28NM_PLL_PU_PLL; + writew(val, base + PHY_28NM_PLL_REG1); + + /* power down PHY Analog part */ + val = readw(base + PHY_28NM_TX_REG0); + val &= ~PHY_28NM_TX_PU_ANA; + writew(val, base + PHY_28NM_TX_REG0); + + /* power down PHY OTG part */ + val = readw(base + PHY_28NM_OTG_REG); + val &= ~PHY_28NM_OTG_PU_OTG; + writew(val, base + PHY_28NM_OTG_REG); + + clk_disable_unprepare(mv_phy->clk); + return 0; +} + +static const struct phy_ops usb_ops = { + .init = mv_usb2_phy_28nm_init, + .power_on = mv_usb2_phy_28nm_power_on, + .power_off = mv_usb2_phy_28nm_power_off, + .exit = mv_usb2_phy_28nm_exit, + .owner = THIS_MODULE, +}; + +static int mv_usb2_phy_probe(struct platform_device *pdev) +{ + struct phy_provider *phy_provider; + struct mv_usb2_phy *mv_phy; + struct resource *r; + + mv_phy = devm_kzalloc(&pdev->dev, sizeof(*mv_phy), GFP_KERNEL); + if (!mv_phy) + return -ENOMEM; + + mv_phy->pdev = pdev; + + mv_phy->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(mv_phy->clk)) { + dev_err(&pdev->dev, "failed to get clock.\n"); + return PTR_ERR(mv_phy->clk); + } + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mv_phy->base = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(mv_phy->base)) + return PTR_ERR(mv_phy->base); + + mv_phy->phy = devm_phy_create(&pdev->dev, pdev->dev.of_node, &usb_ops); + if (IS_ERR(mv_phy->phy)) + return PTR_ERR(mv_phy->phy); + + phy_set_drvdata(mv_phy->phy, mv_phy); + + phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate); + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id mv_usbphy_dt_match[] = { + { .compatible = "marvell,pxa1928-usb-phy", }, + {}, +}; +MODULE_DEVICE_TABLE(of, mv_usbphy_dt_match); + +static struct platform_driver mv_usb2_phy_driver = { + .probe = mv_usb2_phy_probe, + .driver = { + .name = "mv-usb2-phy", + .of_match_table = of_match_ptr(mv_usbphy_dt_match), + }, +}; +module_platform_driver(mv_usb2_phy_driver); + +MODULE_AUTHOR("Rob Herring <robh@kernel.org>"); +MODULE_DESCRIPTION("Marvell USB2 phy driver"); +MODULE_LICENSE("GPL v2"); |