diff options
-rw-r--r-- | arch/arm/mach-omap2/pm34xx.c | 73 | ||||
-rw-r--r-- | arch/arm/plat-omap/include/plat/sram.h | 1 |
2 files changed, 73 insertions, 1 deletions
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 9fb087607e76..bab9b480a089 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -5,6 +5,9 @@ * Tony Lindgren <tony@atomide.com> * Jouni Hogander * + * Copyright (C) 2007 Texas Instruments, Inc. + * Rajendra Nayak <rnayak@ti.com> + * * Copyright (C) 2005 Texas Instruments, Inc. * Richard Woodruff <r-woodruff2@ti.com> * @@ -29,6 +32,8 @@ #include <plat/control.h> #include <plat/serial.h> #include <plat/sdrc.h> +#include <plat/prcm.h> +#include <plat/gpmc.h> #include <asm/tlbflush.h> @@ -39,6 +44,11 @@ #include "prm.h" #include "pm.h" +/* Scratchpad offsets */ +#define OMAP343X_TABLE_ADDRESS_OFFSET 0x31 +#define OMAP343X_TABLE_VALUE_OFFSET 0x30 +#define OMAP343X_CONTROL_REG_VALUE_OFFSET 0x32 + struct power_state { struct powerdomain *pwrdm; u32 next_state; @@ -57,6 +67,46 @@ static struct powerdomain *core_pwrdm, *per_pwrdm; static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state); +static inline void omap3_per_save_context(void) +{ + omap_gpio_save_context(); +} + +static inline void omap3_per_restore_context(void) +{ + omap_gpio_restore_context(); +} + +static void omap3_core_save_context(void) +{ + u32 control_padconf_off; + + /* Save the padconf registers */ + control_padconf_off = omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_OFF); + control_padconf_off |= START_PADCONF_SAVE; + omap_ctrl_writel(control_padconf_off, OMAP343X_CONTROL_PADCONF_OFF); + /* wait for the save to complete */ + while (!omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS) + & PADCONF_SAVE_DONE) + ; + /* Save the Interrupt controller context */ + omap_intc_save_context(); + /* Save the GPMC context */ + omap3_gpmc_save_context(); + /* Save the system control module context, padconf already save above*/ + omap3_control_save_context(); +} + +static void omap3_core_restore_context(void) +{ + /* Restore the control module context, padconf restored by h/w */ + omap3_control_restore_context(); + /* Restore the GPMC context */ + omap3_gpmc_restore_context(); + /* Restore the interrupt controller context */ + omap_intc_restore_context(); +} + /* * PRCM Interrupt Handler Helper Function * @@ -208,6 +258,7 @@ static void omap_sram_idle(void) int mpu_next_state = PWRDM_POWER_ON; int per_next_state = PWRDM_POWER_ON; int core_next_state = PWRDM_POWER_ON; + int core_prev_state, per_prev_state; if (!_omap_sram_idle) return; @@ -246,8 +297,15 @@ static void omap_sram_idle(void) omap_uart_prepare_idle(1); /* PER changes only with core */ per_next_state = pwrdm_read_next_pwrst(per_pwrdm); - if (per_next_state < PWRDM_POWER_ON) + if (per_next_state < PWRDM_POWER_ON) { omap_uart_prepare_idle(2); + if (per_next_state == PWRDM_POWER_OFF) + omap3_per_save_context(); + } + if (core_next_state == PWRDM_POWER_OFF) { + omap3_core_save_context(); + omap3_prcm_save_context(); + } /* Enable IO-PAD wakeup */ prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN); } @@ -272,6 +330,18 @@ static void omap_sram_idle(void) /* Disable IO-PAD wakeup */ prm_clear_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN); + core_prev_state = pwrdm_read_prev_pwrst(core_pwrdm); + if (core_prev_state == PWRDM_POWER_OFF) { + omap3_core_restore_context(); + omap3_prcm_restore_context(); + omap3_sram_restore_context(); + } + if (per_next_state < PWRDM_POWER_ON) { + per_prev_state = + pwrdm_read_prev_pwrst(per_pwrdm); + if (per_prev_state == PWRDM_POWER_OFF) + omap3_per_restore_context(); + } omap2_gpio_resume_after_retention(); } @@ -843,6 +913,7 @@ static int __init omap3_pm_init(void) /* XXX prcm_setup_regs needs to be before enabling hw * supervised mode for powerdomains */ prcm_setup_regs(); + omap3_save_scratchpad_contents(); ret = request_irq(INT_34XX_PRCM_MPU_IRQ, (irq_handler_t)prcm_interrupt_handler, diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h index 77799d576bc8..16a1b458d53c 100644 --- a/arch/arm/plat-omap/include/plat/sram.h +++ b/arch/arm/plat-omap/include/plat/sram.h @@ -27,6 +27,7 @@ extern u32 omap3_configure_core_dpll( u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); +extern void omap3_sram_restore_context(void); /* Do not use these */ extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); |