diff options
| -rw-r--r-- | drivers/mtd/devices/m25p80.c | 31 |
1 files changed, 28 insertions, 3 deletions
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 80404e1a4d5e..96ae54e9650e 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -51,6 +51,10 @@ #define OPCODE_WRDI 0x04 /* Write disable */ #define OPCODE_AAI_WP 0xad /* Auto address increment word program */ +/* Used for Macronix flashes only. */ +#define OPCODE_EN4B 0xb7 /* Enter 4-byte mode */ +#define OPCODE_EX4B 0xe9 /* Exit 4-byte mode */ + /* Status Register bits. */ #define SR_WIP 1 /* Write in progress */ #define SR_WEL 2 /* Write enable latch */ @@ -62,7 +66,7 @@ /* Define max times to check status register before we give up. */ #define MAX_READY_WAIT_JIFFIES (40 * HZ) /* M25P16 specs 40s max chip erase */ -#define MAX_CMD_SIZE 4 +#define MAX_CMD_SIZE 5 #ifdef CONFIG_M25PXX_USE_FAST_READ #define OPCODE_READ OPCODE_FAST_READ @@ -152,6 +156,16 @@ static inline int write_disable(struct m25p *flash) } /* + * Enable/disable 4-byte addressing mode. + */ +static inline int set_4byte(struct m25p *flash, int enable) +{ + u8 code = enable ? OPCODE_EN4B : OPCODE_EX4B; + + return spi_write_then_read(flash->spi, &code, 1, NULL, 0); +} + +/* * Service routine to read status register until ready, or timeout occurs. * Returns non-zero if error. */ @@ -207,6 +221,7 @@ static void m25p_addr2cmd(struct m25p *flash, unsigned int addr, u8 *cmd) cmd[1] = addr >> (flash->addr_width * 8 - 8); cmd[2] = addr >> (flash->addr_width * 8 - 16); cmd[3] = addr >> (flash->addr_width * 8 - 24); + cmd[4] = addr >> (flash->addr_width * 8 - 32); } static int m25p_cmdsz(struct m25p *flash) @@ -607,7 +622,6 @@ struct flash_info { .sector_size = (_sector_size), \ .n_sectors = (_n_sectors), \ .page_size = 256, \ - .addr_width = 3, \ .flags = (_flags), \ }) @@ -653,6 +667,7 @@ static const struct spi_device_id m25p_ids[] = { { "mx25l6405d", INFO(0xc22017, 0, 64 * 1024, 128, 0) }, { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) }, { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) }, + { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, 0) }, /* Spansion -- single (large) sector size only, at least * for the chips listed here (without boot sectors). @@ -884,7 +899,17 @@ static int __devinit m25p_probe(struct spi_device *spi) flash->mtd.dev.parent = &spi->dev; flash->page_size = info->page_size; - flash->addr_width = info->addr_width; + + if (info->addr_width) + flash->addr_width = info->addr_width; + else { + /* enable 4-byte addressing if the device exceeds 16MiB */ + if (flash->mtd.size > 0x1000000) { + flash->addr_width = 4; + set_4byte(flash, 1); + } else + flash->addr_width = 3; + } dev_info(&spi->dev, "%s (%lld Kbytes)\n", id->name, (long long)flash->mtd.size >> 10); |