diff options
30 files changed, 1836 insertions, 265 deletions
diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index a5160d8cbb5f..b9ec668bfe62 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -20,12 +20,15 @@ Required properties: "allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13 "allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s "allwinner,sun7i-a20-ahb-gates-clk" - for the AHB gates on A20 + "allwinner,sun6i-a31-ar100-clk" - for the AR100 on A31 "allwinner,sun6i-a31-ahb1-mux-clk" - for the AHB1 multiplexer on A31 "allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31 "allwinner,sun4i-a10-apb0-clk" - for the APB0 clock + "allwinner,sun6i-a31-apb0-clk" - for the APB0 clock on A31 "allwinner,sun4i-a10-apb0-gates-clk" - for the APB0 gates on A10 "allwinner,sun5i-a13-apb0-gates-clk" - for the APB0 gates on A13 "allwinner,sun5i-a10s-apb0-gates-clk" - for the APB0 gates on A10s + "allwinner,sun6i-a31-apb0-gates-clk" - for the APB0 gates on A31 "allwinner,sun7i-a20-apb0-gates-clk" - for the APB0 gates on A20 "allwinner,sun4i-a10-apb1-clk" - for the APB1 clock "allwinner,sun4i-a10-apb1-mux-clk" - for the APB1 clock muxing @@ -41,6 +44,7 @@ Required properties: "allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31 "allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20 "allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13 + "allwinner,sun6i-a31-usb-clk" - for usb gates + resets on A31 Required properties for all clocks: - reg : shall be the control register address for the clock. diff --git a/Documentation/devicetree/bindings/clock/ti/apll.txt b/Documentation/devicetree/bindings/clock/ti/apll.txt index 7faf5a68b3be..ade4dd4c30f0 100644 --- a/Documentation/devicetree/bindings/clock/ti/apll.txt +++ b/Documentation/devicetree/bindings/clock/ti/apll.txt @@ -14,18 +14,32 @@ a subtype of a DPLL [2], although a simplified one at that. [2] Documentation/devicetree/bindings/clock/ti/dpll.txt Required properties: -- compatible : shall be "ti,dra7-apll-clock" +- compatible : shall be "ti,dra7-apll-clock" or "ti,omap2-apll-clock" - #clock-cells : from common clock binding; shall be set to 0. - clocks : link phandles of parent clocks (clk-ref and clk-bypass) - reg : address and length of the register set for controlling the APLL. It contains the information of registers in the following order: - "control" - contains the control register base address - "idlest" - contains the idlest register base address + "control" - contains the control register offset + "idlest" - contains the idlest register offset + "autoidle" - contains the autoidle register offset (OMAP2 only) +- ti,clock-frequency : static clock frequency for the clock (OMAP2 only) +- ti,idlest-shift : bit-shift for the idlest field (OMAP2 only) +- ti,bit-shift : bit-shift for enable and autoidle fields (OMAP2 only) Examples: - apll_pcie_ck: apll_pcie_ck@4a008200 { + apll_pcie_ck: apll_pcie_ck { #clock-cells = <0>; clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>; - reg = <0x4a00821c 0x4>, <0x4a008220 0x4>; + reg = <0x021c>, <0x0220>; compatible = "ti,dra7-apll-clock"; }; + + apll96_ck: apll96_ck { + #clock-cells = <0>; + compatible = "ti,omap2-apll-clock"; + clocks = <&sys_ck>; + ti,bit-shift = <2>; + ti,idlest-shift = <8>; + ti,clock-frequency = <96000000>; + reg = <0x0500>, <0x0530>, <0x0520>; + }; diff --git a/Documentation/devicetree/bindings/clock/ti/dpll.txt b/Documentation/devicetree/bindings/clock/ti/dpll.txt index 30bfdb7c9f18..df57009ff8e7 100644 --- a/Documentation/devicetree/bindings/clock/ti/dpll.txt +++ b/Documentation/devicetree/bindings/clock/ti/dpll.txt @@ -24,12 +24,14 @@ Required properties: "ti,omap4-dpll-core-clock", "ti,omap4-dpll-m4xen-clock", "ti,omap4-dpll-j-type-clock", + "ti,omap5-mpu-dpll-clock", "ti,am3-dpll-no-gate-clock", "ti,am3-dpll-j-type-clock", "ti,am3-dpll-no-gate-j-type-clock", "ti,am3-dpll-clock", "ti,am3-dpll-core-clock", "ti,am3-dpll-x2-clock", + "ti,omap2-dpll-core-clock", - #clock-cells : from common clock binding; shall be set to 0. - clocks : link phandles of parent clocks, first entry lists reference clock @@ -41,6 +43,7 @@ Required properties: "mult-div1" - contains the multiplier / divider register base address "autoidle" - contains the autoidle register base address (optional) ti,am3-* dpll types do not have autoidle register + ti,omap2-* dpll type does not support idlest / autoidle registers Optional properties: - DPLL mode setting - defining any one or more of the following overrides @@ -73,3 +76,10 @@ Examples: clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x90>, <0x5c>, <0x68>; }; + + dpll_ck: dpll_ck { + #clock-cells = <0>; + compatible = "ti,omap2-dpll-core-clock"; + clocks = <&sys_ck>, <&sys_ck>; + reg = <0x0500>, <0x0540>; + }; diff --git a/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt new file mode 100644 index 000000000000..585e8c191f50 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt @@ -0,0 +1,96 @@ +Device Tree Clock bindings for ATL (Audio Tracking Logic) of DRA7 SoC. + +The ATL IP is used to generate clock to be used to synchronize baseband and +audio codec. A single ATL IP provides four ATL clock instances sharing the same +functional clock but can be configured to provide different clocks. +ATL can maintain a clock averages to some desired frequency based on the bws/aws +signals - can compensate the drift between the two ws signal. + +In order to provide the support for ATL and it's output clocks (which can be used +internally within the SoC or external components) two sets of bindings is needed: + +Clock tree binding: +This binding uses the common clock binding[1]. +To be able to integrate the ATL clocks with DT clock tree. +Provides ccf level representation of the ATL clocks to be used by drivers. +Since the clock instances are part of a single IP this binding is used as a node +for the DT clock tree, the IP driver is needed to handle the actual configuration +of the IP. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be "ti,dra7-atl-clock" +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : link phandles to functional clock of ATL + +Binding for the IP driver: +This binding is used to configure the IP driver which is going to handle the +configuration of the IP for the ATL clock instances. + +Required properties: +- compatible : shall be "ti,dra7-atl" +- reg : base address for the ATL IP +- ti,provided-clocks : List of phandles to the clocks associated with the ATL +- clocks : link phandles to functional clock of ATL +- clock-names : Shall be set to "fck" +- ti,hwmods : Shall be set to "atl" + +Optional properties: +Configuration of ATL instances: +- atl{0/1/2/3} { + - bws : Baseband word select signal selection + - aws : Audio word select signal selection +}; + +For valid word select signals, see the dt-bindings/clk/ti-dra7-atl.h include +file. + +Examples: +/* clock bindings for atl provided clocks */ +atl_clkin0_ck: atl_clkin0_ck { + #clock-cells = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; +}; + +atl_clkin1_ck: atl_clkin1_ck { + #clock-cells = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; +}; + +atl_clkin2_ck: atl_clkin2_ck { + #clock-cells = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; +}; + +atl_clkin3_ck: atl_clkin3_ck { + #clock-cells = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; +}; + +/* binding for the IP */ +atl: atl@4843c000 { + compatible = "ti,dra7-atl"; + reg = <0x4843c000 0x3ff>; + ti,hwmods = "atl"; + ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>, + <&atl_clkin2_ck>, <&atl_clkin3_ck>; + clocks = <&atl_gfclk_mux>; + clock-names = "fck"; + status = "disabled"; +}; + +#include <dt-bindings/clk/ti-dra7-atl.h> + +&atl { + status = "okay"; + + atl2 { + bws = <DRA7_ATL_WS_MCASP2_FSX>; + aws = <DRA7_ATL_WS_MCASP3_FSX>; + }; +}; diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt index 125281aaa4ca..03f8fdee62a7 100644 --- a/Documentation/devicetree/bindings/clock/ti/gate.txt +++ b/Documentation/devicetree/bindings/clock/ti/gate.txt @@ -25,6 +25,11 @@ Required properties: to map clockdomains properly "ti,hsdiv-gate-clock" - gate clock with OMAP36xx specific hardware handling, required for a hardware errata + "ti,composite-gate-clock" - composite gate clock, to be part of composite + clock + "ti,composite-no-wait-gate-clock" - composite gate clock that does not wait + for clock to be active before returning + from clk_enable() - #clock-cells : from common clock binding; shall be set to 0 - clocks : link to phandle of parent clock - reg : offset for register controlling adjustable gate, not needed for @@ -41,7 +46,7 @@ Examples: #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&core_96m_fck>; - reg = <0x48004a00 0x4>; + reg = <0x0a00>; ti,bit-shift = <25>; }; @@ -57,7 +62,7 @@ Examples: #clock-cells = <0>; compatible = "ti,dss-gate-clock"; clocks = <&dpll4_m4x2_ck>; - reg = <0x48004e00 0x4>; + reg = <0x0e00>; ti,bit-shift = <0>; }; @@ -65,7 +70,7 @@ Examples: #clock-cells = <0>; compatible = "ti,am35xx-gate-clock"; clocks = <&ipss_ick>; - reg = <0x4800259c 0x4>; + reg = <0x059c>; ti,bit-shift = <1>; }; @@ -80,6 +85,22 @@ Examples: compatible = "ti,hsdiv-gate-clock"; clocks = <&dpll4_m2x2_mul_ck>; ti,bit-shift = <0x1b>; - reg = <0x48004d00 0x4>; + reg = <0x0d00>; ti,set-bit-to-disable; }; + + vlynq_gate_fck: vlynq_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&core_ck>; + ti,bit-shift = <3>; + reg = <0x0200>; + }; + + sys_clkout2_src_gate: sys_clkout2_src_gate { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&core_ck>; + ti,bit-shift = <15>; + reg = <0x0070>; + }; diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt index 064e8caccac3..3111a409fea6 100644 --- a/Documentation/devicetree/bindings/clock/ti/interface.txt +++ b/Documentation/devicetree/bindings/clock/ti/interface.txt @@ -21,6 +21,8 @@ Required properties: "ti,omap3-dss-interface-clock" - interface clock with DSS specific HW handling "ti,omap3-ssi-interface-clock" - interface clock with SSI specific HW handling "ti,am35xx-interface-clock" - interface clock with AM35xx specific HW handling + "ti,omap2430-interface-clock" - interface clock with OMAP2430 specific HW + handling - #clock-cells : from common clock binding; shall be set to 0 - clocks : link to phandle of parent clock - reg : base address for the control register diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index c7676871d9c0..b03cfe49d22b 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -26,7 +26,7 @@ clock-frequency = <0>; }; - atlclkin3_ck: atlclkin3_ck { + atl_clkin3_ck: atl_clkin3_ck { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <0>; @@ -277,7 +277,7 @@ dpll_mpu_ck: dpll_mpu_ck { #clock-cells = <0>; - compatible = "ti,omap4-dpll-clock"; + compatible = "ti,omap5-mpu-dpll-clock"; clocks = <&sys_clkin1>, <&mpu_dpll_hs_clk_div>; reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>; }; @@ -730,7 +730,7 @@ mcasp1_ahclkr_mux: mcasp1_ahclkr_mux { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ti,bit-shift = <28>; reg = <0x0550>; }; @@ -738,7 +738,7 @@ mcasp1_ahclkx_mux: mcasp1_ahclkx_mux { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ti,bit-shift = <24>; reg = <0x0550>; }; @@ -1639,7 +1639,7 @@ mcasp2_ahclkr_mux: mcasp2_ahclkr_mux { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ti,bit-shift = <28>; reg = <0x1860>; }; @@ -1647,7 +1647,7 @@ mcasp2_ahclkx_mux: mcasp2_ahclkx_mux { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ti,bit-shift = <24>; reg = <0x1860>; }; @@ -1663,7 +1663,7 @@ mcasp3_ahclkx_mux: mcasp3_ahclkx_mux { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ti,bit-shift = <24>; reg = <0x1868>; }; @@ -1679,7 +1679,7 @@ mcasp4_ahclkx_mux: mcasp4_ahclkx_mux { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ti,bit-shift = <24>; reg = <0x1898>; }; @@ -1695,7 +1695,7 @@ mcasp5_ahclkx_mux: mcasp5_ahclkx_mux { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ti,bit-shift = <24>; reg = <0x1878>; }; @@ -1711,7 +1711,7 @@ mcasp6_ahclkx_mux: mcasp6_ahclkx_mux { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ti,bit-shift = <24>; reg = <0x1904>; }; @@ -1727,7 +1727,7 @@ mcasp7_ahclkx_mux: mcasp7_ahclkx_mux { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ti,bit-shift = <24>; reg = <0x1908>; }; @@ -1743,7 +1743,7 @@ mcasp8_ahclk_mux: mcasp8_ahclk_mux { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ti,bit-shift = <22>; reg = <0x1890>; }; diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi index aeb142ce8e9d..e67a23b5d788 100644 --- a/arch/arm/boot/dts/omap54xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi @@ -335,7 +335,7 @@ dpll_mpu_ck: dpll_mpu_ck { #clock-cells = <0>; - compatible = "ti,omap4-dpll-clock"; + compatible = "ti,omap5-mpu-dpll-clock"; clocks = <&sys_clkin>, <&mpu_dpll_hs_clk_div>; reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>; }; diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index b935ed2922d8..85e0b0c06718 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -208,3 +208,56 @@ void omap2xxx_clkt_vps_late_init(void) clk_put(c); } } + +#ifdef CONFIG_OF +#include <linux/clk-provider.h> +#include <linux/clkdev.h> + +static const struct clk_ops virt_prcm_set_ops = { + .recalc_rate = &omap2_table_mpu_recalc, + .set_rate = &omap2_select_table_rate, + .round_rate = &omap2_round_to_table_rate, +}; + +/** + * omap2xxx_clkt_vps_init - initialize virt_prcm_set clock + * + * Does a manual init for the virtual prcm DVFS clock for OMAP2. This + * function is called only from omap2 DT clock init, as the virtual + * node is not modelled in the DT clock data. + */ +void omap2xxx_clkt_vps_init(void) +{ + struct clk_init_data init = { NULL }; + struct clk_hw_omap *hw = NULL; + struct clk *clk; + const char *parent_name = "mpu_ck"; + struct clk_lookup *lookup = NULL; + + omap2xxx_clkt_vps_late_init(); + omap2xxx_clkt_vps_check_bootloader_rates(); + + hw = kzalloc(sizeof(*hw), GFP_KERNEL); + lookup = kzalloc(sizeof(*lookup), GFP_KERNEL); + if (!hw || !lookup) + goto cleanup; + init.name = "virt_prcm_set"; + init.ops = &virt_prcm_set_ops; + init.parent_names = &parent_name; + init.num_parents = 1; + + hw->hw.init = &init; + + clk = clk_register(NULL, &hw->hw); + + lookup->dev_id = NULL; + lookup->con_id = "cpufreq_ck"; + lookup->clk = clk; + + clkdev_add(lookup); + return; +cleanup: + kfree(hw); + kfree(lookup); +} +#endif diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index bda767a9dea8..12f54d428d7c 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -178,17 +178,6 @@ struct clksel { const struct clksel_rate *rates; }; -struct clk_hw_omap_ops { - void (*find_idlest)(struct clk_hw_omap *oclk, - void __iomem **idlest_reg, - u8 *idlest_bit, u8 *idlest_val); - void (*find_companion)(struct clk_hw_omap *oclk, - void __iomem **other_reg, - u8 *other_bit); - void (*allow_idle)(struct clk_hw_omap *oclk); - void (*deny_idle)(struct clk_hw_omap *oclk); -}; - unsigned long omap_fixed_divisor_recalc(struct clk_hw *hw, unsigned long parent_rate); @@ -279,8 +268,6 @@ extern const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait; extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait; extern const struct clk_hw_omap_ops clkhwops_apll54; extern const struct clk_hw_omap_ops clkhwops_apll96; -extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll; -extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait; /* clksel_rate blocks shared between OMAP44xx and AM33xx */ extern const struct clksel_rate div_1_0_rates[]; diff --git a/arch/arm/mach-omap2/clock2xxx.h b/arch/arm/mach-omap2/clock2xxx.h index 539dc08afbba..45f41a411603 100644 --- a/arch/arm/mach-omap2/clock2xxx.h +++ b/arch/arm/mach-omap2/clock2xxx.h @@ -21,10 +21,6 @@ unsigned long omap2xxx_sys_clk_recalc(struct clk_hw *clk, unsigned long parent_rate); unsigned long omap2_osc_clk_recalc(struct clk_hw *clk, unsigned long parent_rate); -unsigned long omap2_dpllcore_recalc(struct clk_hw *hw, - unsigned long parent_rate); -int omap2_reprogram_dpllcore(struct clk_hw *clk, unsigned long rate, - unsigned long parent_rate); void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw); unsigned long omap2_clk_apll54_recalc(struct clk_hw *hw, unsigned long parent_rate); diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index fcd8036af910..6d7ba37e2257 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -319,6 +319,15 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel) /* Set DPLL multiplier, divider */ v = omap2_clk_readl(clk, dd->mult_div1_reg); + + /* Handle Duty Cycle Correction */ + if (dd->dcc_mask) { + if (dd->last_rounded_rate >= dd->dcc_rate) + v |= dd->dcc_mask; /* Enable DCC */ + else + v &= ~dd->dcc_mask; /* Disable DCC */ + } + v &= ~(dd->mult_mask | dd->div1_mask); v |= dd->last_rounded_m << __ffs(dd->mult_mask); v |= (dd->last_rounded_n - 1) << __ffs(dd->div1_mask); diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile index b5bac917612c..762fd64dbd1f 100644 --- a/drivers/clk/sunxi/Makefile +++ b/drivers/clk/sunxi/Makefile @@ -3,3 +3,7 @@ # obj-y += clk-sunxi.o clk-factors.o +obj-y += clk-a10-hosc.o +obj-y += clk-a20-gmac.o + +obj-$(CONFIG_MFD_SUN6I_PRCM) += clk-sun6i-ar100.o clk-sun6i-apb0.o clk-sun6i-apb0-gates.o diff --git a/drivers/clk/sunxi/clk-a10-hosc.c b/drivers/clk/sunxi/clk-a10-hosc.c new file mode 100644 index 000000000000..0481d5d673d6 --- /dev/null +++ b/drivers/clk/sunxi/clk-a10-hosc.c @@ -0,0 +1,73 @@ +/* + * Copyright 2013 Emilio López + * + * Emilio López <emilio@elopez.com.ar> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#define SUNXI_OSC24M_GATE 0 + +static DEFINE_SPINLOCK(hosc_lock); + +static void __init sun4i_osc_clk_setup(struct device_node *node) +{ + struct clk *clk; + struct clk_fixed_rate *fixed; + struct clk_gate *gate; + const char *clk_name = node->name; + u32 rate; + + if (of_property_read_u32(node, "clock-frequency", &rate)) + return; + + /* allocate fixed-rate and gate clock structs */ + fixed = kzalloc(sizeof(struct clk_fixed_rate), GFP_KERNEL); + if (!fixed) + return; + gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL); + if (!gate) + goto err_free_fixed; + + of_property_read_string(node, "clock-output-names", &clk_name); + + /* set up gate and fixed rate properties */ + gate->reg = of_iomap(node, 0); + gate->bit_idx = SUNXI_OSC24M_GATE; + gate->lock = &hosc_lock; + fixed->fixed_rate = rate; + + clk = clk_register_composite(NULL, clk_name, + NULL, 0, + NULL, NULL, + &fixed->hw, &clk_fixed_rate_ops, + &gate->hw, &clk_gate_ops, + CLK_IS_ROOT); + + if (IS_ERR(clk)) + goto err_free_gate; + + of_clk_add_provider(node, of_clk_src_simple_get, clk); + clk_register_clkdev(clk, clk_name, NULL); + + return; + +err_free_gate: + kfree(gate); +err_free_fixed: + kfree(fixed); +} +CLK_OF_DECLARE(sun4i_osc, "allwinner,sun4i-a10-osc-clk", sun4i_osc_clk_setup); diff --git a/drivers/clk/sunxi/clk-a20-gmac.c b/drivers/clk/sunxi/clk-a20-gmac.c new file mode 100644 index 000000000000..633ddc4389ef --- /dev/null +++ b/drivers/clk/sunxi/clk-a20-gmac.c @@ -0,0 +1,119 @@ +/* + * Copyright 2013 Emilio López + * Emilio López <emilio@elopez.com.ar> + * + * Copyright 2013 Chen-Yu Tsai + * Chen-Yu Tsai <wens@csie.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/slab.h> + +static DEFINE_SPINLOCK(gmac_lock); + +/** + * sun7i_a20_gmac_clk_setup - Setup function for A20/A31 GMAC clock module + * + * This clock looks something like this + * ________________________ + * MII TX clock from PHY >-----|___________ _________|----> to GMAC core + * GMAC Int. RGMII TX clk >----|___________\__/__gate---|----> to PHY + * Ext. 125MHz RGMII TX clk >--|__divider__/ | + * |________________________| + * + * The external 125 MHz reference is optional, i.e. GMAC can use its + * internal TX clock just fine. The A31 GMAC clock module does not have + * the divider controls for the external reference. + * + * To keep it simple, let the GMAC use either the MII TX clock for MII mode, + * and its internal TX clock for GMII and RGMII modes. The GMAC driver should + * select the appropriate source and gate/ungate the output to the PHY. + * + * Only the GMAC should use this clock. Altering the clock so that it doesn't + * match the GMAC's operation parameters will result in the GMAC not being + * able to send traffic out. The GMAC driver should set the clock rate and + * enable/disable this clock to configure the required state. The clock + * driver then responds by auto-reparenting the clock. + */ + +#define SUN7I_A20_GMAC_GPIT 2 +#define SUN7I_A20_GMAC_MASK 0x3 +#define SUN7I_A20_GMAC_PARENTS 2 + +static void __init sun7i_a20_gmac_clk_setup(struct device_node *node) +{ + struct clk *clk; + struct clk_mux *mux; + struct clk_gate *gate; + const char *clk_name = node->name; + const char *parents[SUN7I_A20_GMAC_PARENTS]; + void *reg; + + if (of_property_read_string(node, "clock-output-names", &clk_name)) + return; + + /* allocate mux and gate clock structs */ + mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL); + if (!mux) + return; + + gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL); + if (!gate) + goto free_mux; + + /* gmac clock requires exactly 2 parents */ + parents[0] = of_clk_get_parent_name(node, 0); + parents[1] = of_clk_get_parent_name(node, 1); + if (!parents[0] || !parents[1]) + goto free_gate; + + reg = of_iomap(node, 0); + if (!reg) + goto free_gate; + + /* set up gate and fixed rate properties */ + gate->reg = reg; + gate->bit_idx = SUN7I_A20_GMAC_GPIT; + gate->lock = &gmac_lock; + mux->reg = reg; + mux->mask = SUN7I_A20_GMAC_MASK; + mux->flags = CLK_MUX_INDEX_BIT; + mux->lock = &gmac_lock; + + clk = clk_register_composite(NULL, clk_name, + parents, SUN7I_A20_GMAC_PARENTS, + &mux->hw, &clk_mux_ops, + NULL, NULL, + &gate->hw, &clk_gate_ops, + 0); + + if (IS_ERR(clk)) + goto iounmap_reg; + + of_clk_add_provider(node, of_clk_src_simple_get, clk); + clk_register_clkdev(clk, clk_name, NULL); + + return; + +iounmap_reg: + iounmap(reg); +free_gate: + kfree(gate); +free_mux: + kfree(mux); +} +CLK_OF_DECLARE(sun7i_a20_gmac, "allwinner,sun7i-a20-gmac-clk", + sun7i_a20_gmac_clk_setup); diff --git a/drivers/clk/sunxi/clk-sun6i-apb0-gates.c b/drivers/clk/sunxi/clk-sun6i-apb0-gates.c new file mode 100644 index 000000000000..44cd27c5c401 --- /dev/null +++ b/drivers/clk/sunxi/clk-sun6i-apb0-gates.c @@ -0,0 +1,99 @@ +/* + * Copyright (C) 2014 Free Electrons + * + * License Terms: GNU General Public License v2 + * Author: Boris BREZILLON <boris.brezillon@free-electrons.com> + * + * Allwinner A31 APB0 clock gates driver + * + */ + +#include <linux/clk-provider.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> + +#define SUN6I_APB0_GATES_MAX_SIZE 32 + +static int sun6i_a31_apb0_gates_clk_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct clk_onecell_data *clk_data; + const char *clk_parent; + const char *clk_name; + struct resource *r; + void __iomem *reg; + int gate_id; + int ngates; + int i; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + reg = devm_ioremap_resource(&pdev->dev, r); + if (!reg) + return PTR_ERR(reg); + + clk_parent = of_clk_get_parent_name(np, 0); + if (!clk_parent) + return -EINVAL; + + ngates = of_property_count_strings(np, "clock-output-names"); + if (ngates < 0) + return ngates; + + if (!ngates || ngates > SUN6I_APB0_GATES_MAX_SIZE) + return -EINVAL; + + clk_data = devm_kzalloc(&pdev->dev, sizeof(struct clk_onecell_data), + GFP_KERNEL); + if (!clk_data) + return -ENOMEM; + + clk_data->clks = devm_kzalloc(&pdev->dev, + SUN6I_APB0_GATES_MAX_SIZE * + sizeof(struct clk *), + GFP_KERNEL); + if (!clk_data->clks) + return -ENOMEM; + + for (i = 0; i < ngates; i++) { + of_property_read_string_index(np, "clock-output-names", + i, &clk_name); + + gate_id = i; + of_property_read_u32_index(np, "clock-indices", i, &gate_id); + + WARN_ON(gate_id >= SUN6I_APB0_GATES_MAX_SIZE); + if (gate_id >= SUN6I_APB0_GATES_MAX_SIZE) + continue; + + clk_data->clks[gate_id] = clk_register_gate(&pdev->dev, + clk_name, + clk_parent, 0, + reg, gate_id, + 0, NULL); + WARN_ON(IS_ERR(clk_data->clks[gate_id])); + } + + clk_data->clk_num = ngates; + + return of_clk_add_provider(np, of_clk_src_onecell_get, clk_data); +} + +const struct of_device_id sun6i_a31_apb0_gates_clk_dt_ids[] = { + { .compatible = "allwinner,sun6i-a31-apb0-gates-clk" }, + { /* sentinel */ } +}; + +static struct platform_driver sun6i_a31_apb0_gates_clk_driver = { + .driver = { + .name = "sun6i-a31-apb0-gates-clk", + .owner = THIS_MODULE, + .of_match_table = sun6i_a31_apb0_gates_clk_dt_ids, + }, + .probe = sun6i_a31_apb0_gates_clk_probe, +}; +module_platform_driver(sun6i_a31_apb0_gates_clk_driver); + +MODULE_AUTHOR("Boris BREZILLON <boris.brezillon@free-electrons.com>"); +MODULE_DESCRIPTION("Allwinner A31 APB0 gate clocks driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/clk/sunxi/clk-sun6i-apb0.c b/drivers/clk/sunxi/clk-sun6i-apb0.c new file mode 100644 index 000000000000..11f17c34c2ae --- /dev/null +++ b/drivers/clk/sunxi/clk-sun6i-apb0.c @@ -0,0 +1,77 @@ +/* + * Copyright (C) 2014 Free Electrons + * + * License Terms: GNU General Public License v2 + * Author: Boris BREZILLON <boris.brezillon@free-electrons.com> + * + * Allwinner A31 APB0 clock driver + * + */ + +#include <linux/clk-provider.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> + +/* + * The APB0 clk has a configurable divisor. + * + * We must use a clk_div_table and not a regular power of 2 + * divisor here, because the first 2 values divide the clock + * by 2. + */ +static const struct clk_div_table sun6i_a31_apb0_divs[] = { + { .val = 0, .div = 2, }, + { .val = 1, .div = 2, }, + { .val = 2, .div = 4, }, + { .val = 3, .div = 8, }, + { /* sentinel */ }, +}; + +static int sun6i_a31_apb0_clk_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + const char *clk_name = np->name; + const char *clk_parent; + struct resource *r; + void __iomem *reg; + struct clk *clk; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + reg = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(reg)) + return PTR_ERR(reg); + + clk_parent = of_clk_get_parent_name(np, 0); + if (!clk_parent) + return -EINVAL; + + of_property_read_string(np, "clock-output-names", &clk_name); + + clk = clk_register_divider_table(&pdev->dev, clk_name, clk_parent, + 0, reg, 0, 2, 0, sun6i_a31_apb0_divs, + NULL); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + return of_clk_add_provider(np, of_clk_src_simple_get, clk); +} + +const struct of_device_id sun6i_a31_apb0_clk_dt_ids[] = { + { .compatible = "allwinner,sun6i-a31-apb0-clk" }, + { /* sentinel */ } +}; + +static struct platform_driver sun6i_a31_apb0_clk_driver = { + .driver = { + .name = "sun6i-a31-apb0-clk", + .owner = THIS_MODULE, + .of_match_table = sun6i_a31_apb0_clk_dt_ids, + }, + .probe = sun6i_a31_apb0_clk_probe, +}; +module_platform_driver(sun6i_a31_apb0_clk_driver); + +MODULE_AUTHOR("Boris BREZILLON <boris.brezillon@free-electrons.com>"); +MODULE_DESCRIPTION("Allwinner A31 APB0 clock Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/clk/sunxi/clk-sun6i-ar100.c b/drivers/clk/sunxi/clk-sun6i-ar100.c new file mode 100644 index 000000000000..f73cc051f0dd --- /dev/null +++ b/drivers/clk/sunxi/clk-sun6i-ar100.c @@ -0,0 +1,233 @@ +/* + * Copyright (C) 2014 Free Electrons + * + * License Terms: GNU General Public License v2 + * Author: Boris BREZILLON <boris.brezillon@free-electrons.com> + * + * Allwinner A31 AR100 clock driver + * + */ + +#include <linux/clk-provider.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> + +#define SUN6I_AR100_MAX_PARENTS 4 +#define SUN6I_AR100_SHIFT_MASK 0x3 +#define SUN6I_AR100_SHIFT_MAX SUN6I_AR100_SHIFT_MASK +#define SUN6I_AR100_SHIFT_SHIFT 4 +#define SUN6I_AR100_DIV_MASK 0x1f +#define SUN6I_AR100_DIV_MAX (SUN6I_AR100_DIV_MASK + 1) +#define SUN6I_AR100_DIV_SHIFT 8 +#define SUN6I_AR100_MUX_MASK 0x3 +#define SUN6I_AR100_MUX_SHIFT 16 + +struct ar100_clk { + struct clk_hw hw; + void __iomem *reg; +}; + +static inline struct ar100_clk *to_ar100_clk(struct clk_hw *hw) +{ + return container_of(hw, struct ar100_clk, hw); +} + +static unsigned long ar100_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct ar100_clk *clk = to_ar100_clk(hw); + u32 val = readl(clk->reg); + int shift = (val >> SUN6I_AR100_SHIFT_SHIFT) & SUN6I_AR100_SHIFT_MASK; + int div = (val >> SUN6I_AR100_DIV_SHIFT) & SUN6I_AR100_DIV_MASK; + + return (parent_rate >> shift) / (div + 1); +} + +static long ar100_determine_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *best_parent_rate, + struct clk **best_parent_clk) +{ + int nparents = __clk_get_num_parents(hw->clk); + long best_rate = -EINVAL; + int i; + + *best_parent_clk = NULL; + + for (i = 0; i < nparents; i++) { + unsigned long parent_rate; + unsigned long tmp_rate; + struct clk *parent; + unsigned long div; + int shift; + + parent = clk_get_parent_by_index(hw->clk, i); + parent_rate = __clk_get_rate(parent); + div = DIV_ROUND_UP(parent_rate, rate); + + /* + * The AR100 clk contains 2 divisors: + * - one power of 2 divisor + * - one regular divisor + * + * First check if we can safely shift (or divide by a power + * of 2) without losing precision on the requested rate. + */ + shift = ffs(div) - 1; + if (shift > SUN6I_AR100_SHIFT_MAX) + shift = SUN6I_AR100_SHIFT_MAX; + + div >>= shift; + + /* + * Then if the divisor is still bigger than what the HW + * actually supports, use a bigger shift (or power of 2 + * divider) value and accept to lose some precision. + */ + while (div > SUN6I_AR100_DIV_MAX) { + shift++; + div >>= 1; + if (shift > SUN6I_AR100_SHIFT_MAX) + break; + } + + /* + * If the shift value (or power of 2 divider) is bigger + * than what the HW actually support, skip this parent. + */ + if (shift > SUN6I_AR100_SHIFT_MAX) + continue; + + tmp_rate = (parent_rate >> shift) / div; + if (!*best_parent_clk || tmp_rate > best_rate) { + *best_parent_clk = parent; + *best_parent_rate = parent_rate; + best_rate = tmp_rate; + } + } + + return best_rate; +} + +static int ar100_set_parent(struct clk_hw *hw, u8 index) +{ + struct ar100_clk *clk = to_ar100_clk(hw); + u32 val = readl(clk->reg); + + if (index >= SUN6I_AR100_MAX_PARENTS) + return -EINVAL; + + val &= ~(SUN6I_AR100_MUX_MASK << SUN6I_AR100_MUX_SHIFT); + val |= (index << SUN6I_AR100_MUX_SHIFT); + writel(val, clk->reg); + + return 0; +} + +static u8 ar100_get_parent(struct clk_hw *hw) +{ + struct ar100_clk *clk = to_ar100_clk(hw); + return (readl(clk->reg) >> SUN6I_AR100_MUX_SHIFT) & + SUN6I_AR100_MUX_MASK; +} + +static int ar100_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + unsigned long div = parent_rate / rate; + struct ar100_clk *clk = to_ar100_clk(hw); + u32 val = readl(clk->reg); + int shift; + + if (parent_rate % rate) + return -EINVAL; + + shift = ffs(div) - 1; + if (shift > SUN6I_AR100_SHIFT_MAX) + shift = SUN6I_AR100_SHIFT_MAX; + + div >>= shift; + + if (div > SUN6I_AR100_DIV_MAX) + return -EINVAL; + + val &= ~((SUN6I_AR100_SHIFT_MASK << SUN6I_AR100_SHIFT_SHIFT) | + (SUN6I_AR100_DIV_MASK << SUN6I_AR100_DIV_SHIFT)); + val |= (shift << SUN6I_AR100_SHIFT_SHIFT) | + (div << SUN6I_AR100_DIV_SHIFT); + writel(val, clk->reg); + + return 0; +} + +struct clk_ops ar100_ops = { + .recalc_rate = ar100_recalc_rate, + .determine_rate = ar100_determine_rate, + .set_parent = ar100_set_parent, + .get_parent = ar100_get_parent, + .set_rate = ar100_set_rate, +}; + +static int sun6i_a31_ar100_clk_probe(struct platform_device *pdev) +{ + const char *parents[SUN6I_AR100_MAX_PARENTS]; + struct device_node *np = pdev->dev.of_node; + const char *clk_name = np->name; + struct clk_init_data init; + struct ar100_clk *ar100; + struct resource *r; + struct clk *clk; + int nparents; + int i; + + ar100 = devm_kzalloc(&pdev->dev, sizeof(*ar100), GFP_KERNEL); + if (!ar100) + return -ENOMEM; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + ar100->reg = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(ar100->reg)) + return PTR_ERR(ar100->reg); + + nparents = of_clk_get_parent_count(np); + if (nparents > SUN6I_AR100_MAX_PARENTS) + nparents = SUN6I_AR100_MAX_PARENTS; + + for (i = 0; i < nparents; i++) + parents[i] = of_clk_get_parent_name(np, i); + + of_property_read_string(np, "clock-output-names", &clk_name); + + init.name = clk_name; + init.ops = &ar100_ops; + init.parent_names = parents; + init.num_parents = nparents; + init.flags = 0; + + ar100->hw.init = &init; + + clk = clk_register(&pdev->dev, &ar100->hw); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + return of_clk_add_provider(np, of_clk_src_simple_get, clk); +} + +const struct of_device_id sun6i_a31_ar100_clk_dt_ids[] = { + { .compatible = "allwinner,sun6i-a31-ar100-clk" }, + { /* sentinel */ } +}; + +static struct platform_driver sun6i_a31_ar100_clk_driver = { + .driver = { + .name = "sun6i-a31-ar100-clk", + .owner = THIS_MODULE, + .of_match_table = sun6i_a31_ar100_clk_dt_ids, + }, + .probe = sun6i_a31_ar100_clk_probe, +}; +module_platform_driver(sun6i_a31_ar100_clk_driver); + +MODULE_AUTHOR("Boris BREZILLON <boris.brezillon@free-electrons.com>"); +MODULE_DESCRIPTION("Allwinner A31 AR100 clock Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index 426483422d3d..fb2ce8440f0e 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -28,63 +28,6 @@ static DEFINE_SPINLOCK(clk_lock); #define SUNXI_MAX_PARENTS 5 /** - * sun4i_osc_clk_setup() - Setup function for gatable oscillator - */ - -#define SUNXI_OSC24M_GATE 0 - -static void __init sun4i_osc_clk_setup(struct device_node *node) -{ - struct clk *clk; - struct clk_fixed_rate *fixed; - struct clk_gate *gate; - const char *clk_name = node->name; - u32 rate; - - if (of_property_read_u32(node, "clock-frequency", &rate)) - return; - - /* allocate fixed-rate and gate clock structs */ - fixed = kzalloc(sizeof(struct clk_fixed_rate), GFP_KERNEL); - if (!fixed) - return; - gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL); - if (!gate) - goto err_free_fixed; - - of_property_read_string(node, "clock-output-names", &clk_name); - - /* set up gate and fixed rate properties */ - gate->reg = of_iomap(node, 0); - gate->bit_idx = SUNXI_OSC24M_GATE; - gate->lock = &clk_lock; - fixed->fixed_rate = rate; - - clk = clk_register_composite(NULL, clk_name, - NULL, 0, - NULL, NULL, - &fixed->hw, &clk_fixed_rate_ops, - &gate->hw, &clk_gate_ops, - CLK_IS_ROOT); - - if (IS_ERR(clk)) - goto err_free_gate; - - of_clk_add_provider(node, of_clk_src_simple_get, clk); - clk_register_clkdev(clk, clk_name, NULL); - - return; - -err_free_gate: - kfree(gate); -err_free_fixed: - kfree(fixed); -} -CLK_OF_DECLARE(sun4i_osc, "allwinner,sun4i-a10-osc-clk", sun4i_osc_clk_setup); - - - -/** * sun4i_get_pll1_factors() - calculates n, k, m, p factors for PLL1 * PLL1 rate is calculated as follows * rate = (parent_rate * n * (k + 1) >> p) / (m + 1); @@ -408,104 +351,6 @@ static void sun7i_a20_get_out_factors(u32 *freq, u32 parent_rate, *p = calcp; } - - -/** - * sun7i_a20_gmac_clk_setup - Setup function for A20/A31 GMAC clock module - * - * This clock looks something like this - * ________________________ - * MII TX clock from PHY >-----|___________ _________|----> to GMAC core - * GMAC Int. RGMII TX clk >----|___________\__/__gate---|----> to PHY - * Ext. 125MHz RGMII TX clk >--|__divider__/ | - * |________________________| - * - * The external 125 MHz reference is optional, i.e. GMAC can use its - * internal TX clock just fine. The A31 GMAC clock module does not have - * the divider controls for the external reference. - * - * To keep it simple, let the GMAC use either the MII TX clock for MII mode, - * and its internal TX clock for GMII and RGMII modes. The GMAC driver should - * select the appropriate source and gate/ungate the output to the PHY. - * - * Only the GMAC should use this clock. Altering the clock so that it doesn't - * match the GMAC's operation parameters will result in the GMAC not being - * able to send traffic out. The GMAC driver should set the clock rate and - * enable/disable this clock to configure the required state. The clock - * driver then responds by auto-reparenting the clock. - */ - -#define SUN7I_A20_GMAC_GPIT 2 -#define SUN7I_A20_GMAC_MASK 0x3 -#define SUN7I_A20_GMAC_PARENTS 2 - -static void __init sun7i_a20_gmac_clk_setup(struct device_node *node) -{ - struct clk *clk; - struct clk_mux *mux; - struct clk_gate *gate; - const char *clk_name = node->name; - const char *parents[SUN7I_A20_GMAC_PARENTS]; - void *reg; - - if (of_property_read_string(node, "clock-output-names", &clk_name)) - return; - - /* allocate mux and gate clock structs */ - mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL); - if (!mux) - return; - - gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL); - if (!gate) - goto free_mux; - - /* gmac clock requires exactly 2 parents */ - parents[0] = of_clk_get_parent_name(node, 0); - parents[1] = of_clk_get_parent_name(node, 1); - if (!parents[0] || !parents[1]) - goto free_gate; - - reg = of_iomap(node, 0); - if (!reg) - goto free_gate; - - /* set up gate and fixed rate properties */ - gate->reg = reg; - gate->bit_idx = SUN7I_A20_GMAC_GPIT; - gate->lock = &clk_lock; - mux->reg = reg; - mux->mask = SUN7I_A20_GMAC_MASK; - mux->flags = CLK_MUX_INDEX_BIT; - mux->lock = &clk_lock; - - clk = clk_register_composite(NULL, clk_name, - parents, SUN7I_A20_GMAC_PARENTS, - &mux->hw, &clk_mux_ops, - NULL, NULL, - &gate->hw, &clk_gate_ops, - 0); - - if (IS_ERR(clk)) - goto iounmap_reg; - - of_clk_add_provider(node, of_clk_src_simple_get, clk); - clk_register_clkdev(clk, clk_name, NULL); - - return; - -iounmap_reg: - iounmap(reg); -free_gate: - kfree(gate); -free_mux: - kfree(mux); -} -CLK_OF_DECLARE(sun7i_a20_gmac, "allwinner,sun7i-a20-gmac-clk", - sun7i_a20_gmac_clk_setup); - - - /** * clk_sunxi_mmc_phase_control() - configures MMC clock phase control */ @@ -1009,6 +854,11 @@ static const struct gates_data sun5i_a13_usb_gates_data __initconst = { .reset_mask = 0x03, }; +static const struct gates_data sun6i_a31_usb_gates_data __initconst = { + .mask = { BIT(18) | BIT(17) | BIT(16) | BIT(10) | BIT(9) | BIT(8) }, + .reset_mask = BIT(2) | BIT(1) | BIT(0), +}; + static void __init sunxi_gates_clk_setup(struct device_node *node, struct gates_data *data) { @@ -1304,6 +1154,7 @@ static const struct of_device_id clk_gates_match[] __initconst = { {.compatible = "allwinner,sun6i-a31-apb2-gates-clk", .data = &sun6i_a31_apb2_gates_data,}, {.compatible = "allwinner,sun4i-a10-usb-clk", .data = &sun4i_a10_usb_gates_data,}, {.compatible = "allwinner,sun5i-a13-usb-clk", .data = &sun5i_a13_usb_gates_data,}, + {.compatible = "allwinner,sun6i-a31-usb-clk", .data = &sun6i_a31_usb_gates_data,}, {} }; @@ -1321,33 +1172,10 @@ static void __init of_sunxi_table_clock_setup(const struct of_device_id *clk_mat } } -/** - * System clock protection - * - * By enabling these critical clocks, we prevent their accidental gating - * by the framework - */ -static void __init sunxi_clock_protect(void) +static void __init sunxi_init_clocks(const char *clocks[], int nclocks) { - struct clk *clk; - - /* memory bus clock - sun5i+ */ - clk = clk_get(NULL, "mbus"); - if (!IS_ERR(clk)) { - clk_prepare_enable(clk); - clk_put(clk); - } - - /* DDR clock - sun4i+ */ - clk = clk_get(NULL, "pll5_ddr"); - if (!IS_ERR(clk)) { - clk_prepare_enable(clk); - clk_put(clk); - } -} + unsigned int i; -static void __init sunxi_init_clocks(struct device_node *np) -{ /* Register factor clocks */ of_sunxi_table_clock_setup(clk_factors_match, sunxi_factors_clk_setup); @@ -1363,11 +1191,48 @@ static void __init sunxi_init_clocks(struct device_node *np) /* Register gate clocks */ of_sunxi_table_clock_setup(clk_gates_match, sunxi_gates_clk_setup); - /* Enable core system clocks */ - sunxi_clock_protect(); + /* Protect the clocks that needs to stay on */ + for (i = 0; i < nclocks; i++) { + struct clk *clk = clk_get(NULL, clocks[i]); + + if (!IS_ERR(clk)) + clk_prepare_enable(clk); + } +} + +static const char *sun4i_a10_critical_clocks[] __initdata = { + "pll5_ddr", +}; + +static void __init sun4i_a10_init_clocks(struct device_node *node) +{ + sunxi_init_clocks(sun4i_a10_critical_clocks, + ARRAY_SIZE(sun4i_a10_critical_clocks)); +} +CLK_OF_DECLARE(sun4i_a10_clk_init, "allwinner,sun4i-a10", sun4i_a10_init_clocks); + +static const char *sun5i_critical_clocks[] __initdata = { + "mbus", + "pll5_ddr", +}; + +static void __init sun5i_init_clocks(struct device_node *node) +{ + sunxi_init_clocks(sun5i_critical_clocks, + ARRAY_SIZE(sun5i_critical_clocks)); +} +CLK_OF_DECLARE(sun5i_a10s_clk_init, "allwinner,sun5i-a10s", sun5i_init_clocks); +CLK_OF_DECLARE(sun5i_a13_clk_init, "allwinner,sun5i-a13", sun5i_init_clocks); +CLK_OF_DECLARE(sun7i_a20_clk_init, "allwinner,sun7i-a20", sun5i_init_clocks); + +static const char *sun6i_critical_clocks[] __initdata = { + "cpu", + "ahb1_sdram", +}; + +static void __init sun6i_init_clocks(struct device_node *node) +{ + sunxi_init_clocks(sun6i_critical_clocks, + ARRAY_SIZE(sun6i_critical_clocks)); } -CLK_OF_DECLARE(sun4i_a10_clk_init, "allwinner,sun4i-a10", sunxi_init_clocks); -CLK_OF_DECLARE(sun5i_a10s_clk_init, "allwinner,sun5i-a10s", sunxi_init_clocks); -CLK_OF_DECLARE(sun5i_a13_clk_init, "allwinner,sun5i-a13", sunxi_init_clocks); -CLK_OF_DECLARE(sun6i_a31_clk_init, "allwinner,sun6i-a31", sunxi_init_clocks); -CLK_OF_DECLARE(sun7i_a20_clk_init, "allwinner,sun7i-a20", sunxi_init_clocks); +CLK_OF_DECLARE(sun6i_a31_clk_init, "allwinner,sun6i-a31", sun6i_init_clocks); diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile index 4319d4031aa3..ed4d0aaf8916 100644 --- a/drivers/clk/ti/Makefile +++ b/drivers/clk/ti/Makefile @@ -3,9 +3,11 @@ obj-y += clk.o autoidle.o clockdomain.o clk-common = dpll.o composite.o divider.o gate.o \ fixed-factor.o mux.o apll.o obj-$(CONFIG_SOC_AM33XX) += $(clk-common) clk-33xx.o +obj-$(CONFIG_ARCH_OMAP2) += $(clk-common) interface.o clk-2xxx.o obj-$(CONFIG_ARCH_OMAP3) += $(clk-common) interface.o clk-3xxx.o obj-$(CONFIG_ARCH_OMAP4) += $(clk-common) clk-44xx.o obj-$(CONFIG_SOC_OMAP5) += $(clk-common) clk-54xx.o -obj-$(CONFIG_SOC_DRA7XX) += $(clk-common) clk-7xx.o +obj-$(CONFIG_SOC_DRA7XX) += $(clk-common) clk-7xx.o \ + clk-dra7-atl.o obj-$(CONFIG_SOC_AM43XX) += $(clk-common) clk-43xx.o endif diff --git a/drivers/clk/ti/apll.c b/drivers/clk/ti/apll.c index b986f61f5a77..5428c9c547cd 100644 --- a/drivers/clk/ti/apll.c +++ b/drivers/clk/ti/apll.c @@ -221,3 +221,184 @@ cleanup: kfree(init); } CLK_OF_DECLARE(dra7_apll_clock, "ti,dra7-apll-clock", of_dra7_apll_setup); + +#define OMAP2_EN_APLL_LOCKED 0x3 +#define OMAP2_EN_APLL_STOPPED 0x0 + +static int omap2_apll_is_enabled(struct clk_hw *hw) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + struct dpll_data *ad = clk->dpll_data; + u32 v; + + v = ti_clk_ll_ops->clk_readl(ad->control_reg); + v &= ad->enable_mask; + + v >>= __ffs(ad->enable_mask); + + return v == OMAP2_EN_APLL_LOCKED ? 1 : 0; +} + +static unsigned long omap2_apll_recalc(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + + if (omap2_apll_is_enabled(hw)) + return clk->fixed_rate; + + return 0; +} + +static int omap2_apll_enable(struct clk_hw *hw) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + struct dpll_data *ad = clk->dpll_data; + u32 v; + int i = 0; + + v = ti_clk_ll_ops->clk_readl(ad->control_reg); + v &= ~ad->enable_mask; + v |= OMAP2_EN_APLL_LOCKED << __ffs(ad->enable_mask); + ti_clk_ll_ops->clk_writel(v, ad->control_reg); + + while (1) { + v = ti_clk_ll_ops->clk_readl(ad->idlest_reg); + if (v & ad->idlest_mask) + break; + if (i > MAX_APLL_WAIT_TRIES) + break; + i++; + udelay(1); + } + + if (i == MAX_APLL_WAIT_TRIES) { + pr_warn("%s failed to transition to locked\n", + __clk_get_name(clk->hw.clk)); + return -EBUSY; + } + + return 0; +} + +static void omap2_apll_disable(struct clk_hw *hw) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + struct dpll_data *ad = clk->dpll_data; + u32 v; + + v = ti_clk_ll_ops->clk_readl(ad->control_reg); + v &= ~ad->enable_mask; + v |= OMAP2_EN_APLL_STOPPED << __ffs(ad->enable_mask); + ti_clk_ll_ops->clk_writel(v, ad->control_reg); +} + +static struct clk_ops omap2_apll_ops = { + .enable = &omap2_apll_enable, + .disable = &omap2_apll_disable, + .is_enabled = &omap2_apll_is_enabled, + .recalc_rate = &omap2_apll_recalc, +}; + +static void omap2_apll_set_autoidle(struct clk_hw_omap *clk, u32 val) +{ + struct dpll_data *ad = clk->dpll_data; + u32 v; + + v = ti_clk_ll_ops->clk_readl(ad->autoidle_reg); + v &= ~ad->autoidle_mask; + v |= val << __ffs(ad->autoidle_mask); + ti_clk_ll_ops->clk_writel(v, ad->control_reg); +} + +#define OMAP2_APLL_AUTOIDLE_LOW_POWER_STOP 0x3 +#define OMAP2_APLL_AUTOIDLE_DISABLE 0x0 + +static void omap2_apll_allow_idle(struct clk_hw_omap *clk) +{ + omap2_apll_set_autoidle(clk, OMAP2_APLL_AUTOIDLE_LOW_POWER_STOP); +} + +static void omap2_apll_deny_idle(struct clk_hw_omap *clk) +{ + omap2_apll_set_autoidle(clk, OMAP2_APLL_AUTOIDLE_DISABLE); +} + +static struct clk_hw_omap_ops omap2_apll_hwops = { + .allow_idle = &omap2_apll_allow_idle, + .deny_idle = &omap2_apll_deny_idle, +}; + +static void __init of_omap2_apll_setup(struct device_node *node) +{ + struct dpll_data *ad = NULL; + struct clk_hw_omap *clk_hw = NULL; + struct clk_init_data *init = NULL; + struct clk *clk; + const char *parent_name; + u32 val; + + ad = kzalloc(sizeof(*clk_hw), GFP_KERNEL); + clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL); + init = kzalloc(sizeof(*init), GFP_KERNEL); + + if (!ad || !clk_hw || !init) + goto cleanup; + + clk_hw->dpll_data = ad; + clk_hw->hw.init = init; + init->ops = &omap2_apll_ops; + init->name = node->name; + clk_hw->ops = &omap2_apll_hwops; + + init->num_parents = of_clk_get_parent_count(node); + if (init->num_parents != 1) { + pr_err("%s must have one parent\n", node->name); + goto cleanup; + } + + parent_name = of_clk_get_parent_name(node, 0); + init->parent_names = &parent_name; + + if (of_property_read_u32(node, "ti,clock-frequency", &val)) { + pr_err("%s missing clock-frequency\n", node->name); + goto cleanup; + } + clk_hw->fixed_rate = val; + + if (of_property_read_u32(node, "ti,bit-shift", &val)) { + pr_err("%s missing bit-shift\n", node->name); + goto cleanup; + } + + clk_hw->enable_bit = val; + ad->enable_mask = 0x3 << val; + ad->autoidle_mask = 0x3 << val; + + if (of_property_read_u32(node, "ti,idlest-shift", &val)) { + pr_err("%s missing idlest-shift\n", node->name); + goto cleanup; + } + + ad->idlest_mask = 1 << val; + + ad->control_reg = ti_clk_get_reg_addr(node, 0); + ad->autoidle_reg = ti_clk_get_reg_addr(node, 1); + ad->idlest_reg = ti_clk_get_reg_addr(node, 2); + + if (!ad->control_reg || !ad->autoidle_reg || !ad->idlest_reg) + goto cleanup; + + clk = clk_register(NULL, &clk_hw->hw); + if (!IS_ERR(clk)) { + of_clk_add_provider(node, of_clk_src_simple_get, clk); + kfree(init); + return; + } +cleanup: + kfree(ad); + kfree(clk_hw); + kfree(init); +} +CLK_OF_DECLARE(omap2_apll_clock, "ti,omap2-apll-clock", + of_omap2_apll_setup); diff --git a/drivers/clk/ti/clk-2xxx.c b/drivers/clk/ti/clk-2xxx.c new file mode 100644 index 000000000000..c808ab3d2bb2 --- /dev/null +++ b/drivers/clk/ti/clk-2xxx.c @@ -0,0 +1,256 @@ +/* + * OMAP2 Clock init + * + * Copyright (C) 2013 Texas Instruments, Inc + * Tero Kristo (t-kristo@ti.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/clk-provider.h> +#include <linux/clk/ti.h> + +static struct ti_dt_clk omap2xxx_clks[] = { + DT_CLK(NULL, "func_32k_ck", "func_32k_ck"), + DT_CLK(NULL, "secure_32k_ck", "secure_32k_ck"), + DT_CLK(NULL, "virt_12m_ck", "virt_12m_ck"), + DT_CLK(NULL, "virt_13m_ck", "virt_13m_ck"), + DT_CLK(NULL, "virt_19200000_ck", "virt_19200000_ck"), + DT_CLK(NULL, "virt_26m_ck", "virt_26m_ck"), + DT_CLK(NULL, "aplls_clkin_ck", "aplls_clkin_ck"), + DT_CLK(NULL, "aplls_clkin_x2_ck", "aplls_clkin_x2_ck"), + DT_CLK(NULL, "osc_ck", "osc_ck"), + DT_CLK(NULL, "sys_ck", "sys_ck"), + DT_CLK(NULL, "alt_ck", "alt_ck"), + DT_CLK(NULL, "mcbsp_clks", "mcbsp_clks"), + DT_CLK(NULL, "dpll_ck", "dpll_ck"), + DT_CLK(NULL, "apll96_ck", "apll96_ck"), + DT_CLK(NULL, "apll54_ck", "apll54_ck"), + DT_CLK(NULL, "func_54m_ck", "func_54m_ck"), + DT_CLK(NULL, "core_ck", "core_ck"), + DT_CLK(NULL, "func_96m_ck", "func_96m_ck"), + DT_CLK(NULL, "func_48m_ck", "func_48m_ck"), + DT_CLK(NULL, "func_12m_ck", "func_12m_ck"), + DT_CLK(NULL, "sys_clkout_src", "sys_clkout_src"), + DT_CLK(NULL, "sys_clkout", "sys_clkout"), + DT_CLK(NULL, "emul_ck", "emul_ck"), + DT_CLK(NULL, "mpu_ck", "mpu_ck"), + DT_CLK(NULL, "dsp_fck", "dsp_fck"), + DT_CLK(NULL, "gfx_3d_fck", "gfx_3d_fck"), + DT_CLK(NULL, "gfx_2d_fck", "gfx_2d_fck"), + DT_CLK(NULL, "gfx_ick", "gfx_ick"), + DT_CLK("omapdss_dss", "ick", "dss_ick"), + DT_CLK(NULL, "dss_ick", "dss_ick"), + DT_CLK(NULL, "dss1_fck", "dss1_fck"), + DT_CLK(NULL, "dss2_fck", "dss2_fck"), + DT_CLK(NULL, "dss_54m_fck", "dss_54m_fck"), + DT_CLK(NULL, "core_l3_ck", "core_l3_ck"), + DT_CLK(NULL, "ssi_fck", "ssi_ssr_sst_fck"), + DT_CLK(NULL, "usb_l4_ick", "usb_l4_ick"), + DT_CLK(NULL, "l4_ck", "l4_ck"), + DT_CLK(NULL, "ssi_l4_ick", "ssi_l4_ick"), + DT_CLK(NULL, "gpt1_ick", "gpt1_ick"), + DT_CLK(NULL, "gpt1_fck", "gpt1_fck"), + DT_CLK(NULL, "gpt2_ick", "gpt2_ick"), + DT_CLK(NULL, "gpt2_fck", "gpt2_fck"), + DT_CLK(NULL, "gpt3_ick", "gpt3_ick"), + DT_CLK(NULL, "gpt3_fck", "gpt3_fck"), + DT_CLK(NULL, "gpt4_ick", "gpt4_ick"), + DT_CLK(NULL, "gpt4_fck", "gpt4_fck"), + DT_CLK(NULL, "gpt5_ick", "gpt5_ick"), + DT_CLK(NULL, "gpt5_fck", "gpt5_fck"), + DT_CLK(NULL, "gpt6_ick", "gpt6_ick"), + DT_CLK(NULL, "gpt6_fck", "gpt6_fck"), + DT_CLK(NULL, "gpt7_ick", "gpt7_ick"), + DT_CLK(NULL, "gpt7_fck", "gpt7_fck"), + DT_CLK(NULL, "gpt8_ick", "gpt8_ick"), + DT_CLK(NULL, "gpt8_fck", "gpt8_fck"), + DT_CLK(NULL, "gpt9_ick", "gpt9_ick"), + DT_CLK(NULL, "gpt9_fck", "gpt9_fck"), + DT_CLK(NULL, "gpt10_ick", "gpt10_ick"), + DT_CLK(NULL, "gpt10_fck", "gpt10_fck"), + DT_CLK(NULL, "gpt11_ick", "gpt11_ick"), + DT_CLK(NULL, "gpt11_fck", "gpt11_fck"), + DT_CLK(NULL, "gpt12_ick", "gpt12_ick"), + DT_CLK(NULL, "gpt12_fck", "gpt12_fck"), + DT_CLK("omap-mcbsp.1", "ick", "mcbsp1_ick"), + DT_CLK(NULL, "mcbsp1_ick", "mcbsp1_ick"), + DT_CLK(NULL, "mcbsp1_fck", "mcbsp1_fck"), + DT_CLK("omap-mcbsp.2", "ick", "mcbsp2_ick"), + DT_CLK(NULL, "mcbsp2_ick", "mcbsp2_ick"), + DT_CLK(NULL, "mcbsp2_fck", "mcbsp2_fck"), + DT_CLK("omap2_mcspi.1", "ick", "mcspi1_ick"), + DT_CLK(NULL, "mcspi1_ick", "mcspi1_ick"), + DT_CLK(NULL, "mcspi1_fck", "mcspi1_fck"), + DT_CLK("omap2_mcspi.2", "ick", "mcspi2_ick"), + DT_CLK(NULL, "mcspi2_ick", "mcspi2_ick"), + DT_CLK(NULL, "mcspi2_fck", "mcspi2_fck"), + DT_CLK(NULL, "uart1_ick", "uart1_ick"), + DT_CLK(NULL, "uart1_fck", "uart1_fck"), + DT_CLK(NULL, "uart2_ick", "uart2_ick"), + DT_CLK(NULL, "uart2_fck", "uart2_fck"), + DT_CLK(NULL, "uart3_ick", "uart3_ick"), + DT_CLK(NULL, "uart3_fck", "uart3_fck"), + DT_CLK(NULL, "gpios_ick", "gpios_ick"), + DT_CLK(NULL, "gpios_fck", "gpios_fck"), + DT_CLK("omap_wdt", "ick", "mpu_wdt_ick"), + DT_CLK(NULL, "mpu_wdt_ick", "mpu_wdt_ick"), + DT_CLK(NULL, "mpu_wdt_fck", "mpu_wdt_fck"), + DT_CLK(NULL, "sync_32k_ick", "sync_32k_ick"), + DT_CLK(NULL, "wdt1_ick", "wdt1_ick"), + DT_CLK(NULL, "omapctrl_ick", "omapctrl_ick"), + DT_CLK("omap24xxcam", "fck", "cam_fck"), + DT_CLK(NULL, "cam_fck", "cam_fck"), + DT_CLK("omap24xxcam", "ick", "cam_ick"), + DT_CLK(NULL, "cam_ick", "cam_ick"), + DT_CLK(NULL, "mailboxes_ick", "mailboxes_ick"), + DT_CLK(NULL, "wdt4_ick", "wdt4_ick"), + DT_CLK(NULL, "wdt4_fck", "wdt4_fck"), + DT_CLK(NULL, "mspro_ick", "mspro_ick"), + DT_CLK(NULL, "mspro_fck", "mspro_fck"), + DT_CLK(NULL, "fac_ick", "fac_ick"), + DT_CLK(NULL, "fac_fck", "fac_fck"), + DT_CLK("omap_hdq.0", "ick", "hdq_ick"), + DT_CLK(NULL, "hdq_ick", "hdq_ick"), + DT_CLK("omap_hdq.0", "fck", "hdq_fck"), + DT_CLK(NULL, "hdq_fck", "hdq_fck"), + DT_CLK("omap_i2c.1", "ick", "i2c1_ick"), + DT_CLK(NULL, "i2c1_ick", "i2c1_ick"), + DT_CLK("omap_i2c.2", "ick", "i2c2_ick"), + DT_CLK(NULL, "i2c2_ick", "i2c2_ick"), + DT_CLK(NULL, "gpmc_fck", "gpmc_fck"), + DT_CLK(NULL, "sdma_fck", "sdma_fck"), + DT_CLK(NULL, "sdma_ick", "sdma_ick"), + DT_CLK(NULL, "sdrc_ick", "sdrc_ick"), + DT_CLK(NULL, "des_ick", "des_ick"), + DT_CLK("omap-sham", "ick", "sha_ick"), + DT_CLK(NULL, "sha_ick", "sha_ick"), + DT_CLK("omap_rng", "ick", "rng_ick"), + DT_CLK(NULL, "rng_ick", "rng_ick"), + DT_CLK("omap-aes", "ick", "aes_ick"), + DT_CLK(NULL, "aes_ick", "aes_ick"), + DT_CLK(NULL, "pka_ick", "pka_ick"), + DT_CLK(NULL, "usb_fck", "usb_fck"), + DT_CLK(NULL, "timer_32k_ck", "func_32k_ck"), + DT_CLK(NULL, "timer_sys_ck", "sys_ck"), + DT_CLK(NULL, "timer_ext_ck", "alt_ck"), + { .node_name = NULL }, +}; + +static struct ti_dt_clk omap2420_clks[] = { + DT_CLK(NULL, "sys_clkout2_src", "sys_clkout2_src"), + DT_CLK(NULL, "sys_clkout2", "sys_clkout2"), + DT_CLK(NULL, "dsp_ick", "dsp_ick"), + DT_CLK(NULL, "iva1_ifck", "iva1_ifck"), + DT_CLK(NULL, "iva1_mpu_int_ifck", "iva1_mpu_int_ifck"), + DT_CLK(NULL, "wdt3_ick", "wdt3_ick"), + DT_CLK(NULL, "wdt3_fck", "wdt3_fck"), + DT_CLK("mmci-omap.0", "ick", "mmc_ick"), + DT_CLK(NULL, "mmc_ick", "mmc_ick"), + DT_CLK("mmci-omap.0", "fck", "mmc_fck"), + DT_CLK(NULL, "mmc_fck", "mmc_fck"), + DT_CLK(NULL, "eac_ick", "eac_ick"), + DT_CLK(NULL, "eac_fck", "eac_fck"), + DT_CLK(NULL, "i2c1_fck", "i2c1_fck"), + DT_CLK(NULL, "i2c2_fck", "i2c2_fck"), + DT_CLK(NULL, "vlynq_ick", "vlynq_ick"), + DT_CLK(NULL, "vlynq_fck", "vlynq_fck"), + DT_CLK("musb-hdrc", "fck", "osc_ck"), + { .node_name = NULL }, +}; + +static struct ti_dt_clk omap2430_clks[] = { + DT_CLK("twl", "fck", "osc_ck"), + DT_CLK(NULL, "iva2_1_ick", "iva2_1_ick"), + DT_CLK(NULL, "mdm_ick", "mdm_ick"), + DT_CLK(NULL, "mdm_osc_ck", "mdm_osc_ck"), + DT_CLK("omap-mcbsp.3", "ick", "mcbsp3_ick"), + DT_CLK(NULL, "mcbsp3_ick", "mcbsp3_ick"), + DT_CLK(NULL, "mcbsp3_fck", "mcbsp3_fck"), + DT_CLK("omap-mcbsp.4", "ick", "mcbsp4_ick"), + DT_CLK(NULL, "mcbsp4_ick", "mcbsp4_ick"), + DT_CLK(NULL, "mcbsp4_fck", "mcbsp4_fck"), + DT_CLK("omap-mcbsp.5", "ick", "mcbsp5_ick"), + DT_CLK(NULL, "mcbsp5_ick", "mcbsp5_ick"), + DT_CLK(NULL, "mcbsp5_fck", "mcbsp5_fck"), + DT_CLK("omap2_mcspi.3", "ick", "mcspi3_ick"), + DT_CLK(NULL, "mcspi3_ick", "mcspi3_ick"), + DT_CLK(NULL, "mcspi3_fck", "mcspi3_fck"), + DT_CLK(NULL, "icr_ick", "icr_ick"), + DT_CLK(NULL, "i2chs1_fck", "i2chs1_fck"), + DT_CLK(NULL, "i2chs2_fck", "i2chs2_fck"), + DT_CLK("musb-omap2430", "ick", "usbhs_ick"), + DT_CLK(NULL, "usbhs_ick", "usbhs_ick"), + DT_CLK("omap_hsmmc.0", "ick", "mmchs1_ick"), + DT_CLK(NULL, "mmchs1_ick", "mmchs1_ick"), + DT_CLK(NULL, "mmchs1_fck", "mmchs1_fck"), + DT_CLK("omap_hsmmc.1", "ick", "mmchs2_ick"), + DT_CLK(NULL, "mmchs2_ick", "mmchs2_ick"), + DT_CLK(NULL, "mmchs2_fck", "mmchs2_fck"), + DT_CLK(NULL, "gpio5_ick", "gpio5_ick"), + DT_CLK(NULL, "gpio5_fck", "gpio5_fck"), + DT_CLK(NULL, "mdm_intc_ick", "mdm_intc_ick"), + DT_CLK("omap_hsmmc.0", "mmchsdb_fck", "mmchsdb1_fck"), + DT_CLK(NULL, "mmchsdb1_fck", "mmchsdb1_fck"), + DT_CLK("omap_hsmmc.1", "mmchsdb_fck", "mmchsdb2_fck"), + DT_CLK(NULL, "mmchsdb2_fck", "mmchsdb2_fck"), + { .node_name = NULL }, +}; + +static const char *enable_init_clks[] = { + "apll96_ck", + "apll54_ck", + "sync_32k_ick", + "omapctrl_ick", + "gpmc_fck", + "sdrc_ick", +}; + +enum { + OMAP2_SOC_OMAP2420, + OMAP2_SOC_OMAP2430, +}; + +static int __init omap2xxx_dt_clk_init(int soc_type) +{ + ti_dt_clocks_register(omap2xxx_clks); + + if (soc_type == OMAP2_SOC_OMAP2420) + ti_dt_clocks_register(omap2420_clks); + else + ti_dt_clocks_register(omap2430_clks); + + omap2xxx_clkt_vps_init(); + + omap2_clk_disable_autoidle_all(); + + omap2_clk_enable_init_clocks(enable_init_clks, + ARRAY_SIZE(enable_init_clks)); + + pr_info("Clocking rate (Crystal/DPLL/MPU): %ld.%01ld/%ld/%ld MHz\n", + (clk_get_rate(clk_get_sys(NULL, "sys_ck")) / 1000000), + (clk_get_rate(clk_get_sys(NULL, "sys_ck")) / 100000) % 10, + (clk_get_rate(clk_get_sys(NULL, "dpll_ck")) / 1000000), + (clk_get_rate(clk_get_sys(NULL, "mpu_ck")) / 1000000)); + + return 0; +} + +int __init omap2420_dt_clk_init(void) +{ + return omap2xxx_dt_clk_init(OMAP2_SOC_OMAP2420); +} + +int __init omap2430_dt_clk_init(void) +{ + return omap2xxx_dt_clk_init(OMAP2_SOC_OMAP2430); +} diff --git a/drivers/clk/ti/clk-54xx.c b/drivers/clk/ti/clk-54xx.c index 08f3d1b915b3..5e183993e3ec 100644 --- a/drivers/clk/ti/clk-54xx.c +++ b/drivers/clk/ti/clk-54xx.c @@ -240,6 +240,12 @@ int __init omap5xxx_dt_clk_init(void) if (rc) pr_err("%s: failed to configure ABE DPLL!\n", __func__); + abe_dpll = clk_get_sys(NULL, "dpll_abe_m2x2_ck"); + if (!rc) + rc = clk_set_rate(abe_dpll, OMAP5_DPLL_ABE_DEFFREQ * 2); + if (rc) + pr_err("%s: failed to configure ABE m2x2 DPLL!\n", __func__); + usb_dpll = clk_get_sys(NULL, "dpll_usb_ck"); rc = clk_set_rate(usb_dpll, OMAP5_DPLL_USB_DEFFREQ); if (rc) diff --git a/drivers/clk/ti/clk-7xx.c b/drivers/clk/ti/clk-7xx.c index f7e40734c819..e1581335937d 100644 --- a/drivers/clk/ti/clk-7xx.c +++ b/drivers/clk/ti/clk-7xx.c @@ -24,7 +24,7 @@ static struct ti_dt_clk dra7xx_clks[] = { DT_CLK(NULL, "atl_clkin0_ck", "atl_clkin0_ck"), DT_CLK(NULL, "atl_clkin1_ck", "atl_clkin1_ck"), DT_CLK(NULL, "atl_clkin2_ck", "atl_clkin2_ck"), - DT_CLK(NULL, "atlclkin3_ck", "atlclkin3_ck"), + DT_CLK(NULL, "atl_clkin3_ck", "atl_clkin3_ck"), DT_CLK(NULL, "hdmi_clkin_ck", "hdmi_clkin_ck"), DT_CLK(NULL, "mlb_clkin_ck", "mlb_clkin_ck"), DT_CLK(NULL, "mlbp_clkin_ck", "mlbp_clkin_ck"), diff --git a/drivers/clk/ti/clk-dra7-atl.c b/drivers/clk/ti/clk-dra7-atl.c new file mode 100644 index 000000000000..4a65b410e4d5 --- /dev/null +++ b/drivers/clk/ti/clk-dra7-atl.c @@ -0,0 +1,312 @@ +/* + * DRA7 ATL (Audio Tracking Logic) clock driver + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * Peter Ujfalusi <peter.ujfalusi@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/clk-provider.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> + +#define DRA7_ATL_INSTANCES 4 + +#define DRA7_ATL_PPMR_REG(id) (0x200 + (id * 0x80)) +#define DRA7_ATL_BBSR_REG(id) (0x204 + (id * 0x80)) +#define DRA7_ATL_ATLCR_REG(id) (0x208 + (id * 0x80)) +#define DRA7_ATL_SWEN_REG(id) (0x210 + (id * 0x80)) +#define DRA7_ATL_BWSMUX_REG(id) (0x214 + (id * 0x80)) +#define DRA7_ATL_AWSMUX_REG(id) (0x218 + (id * 0x80)) +#define DRA7_ATL_PCLKMUX_REG(id) (0x21c + (id * 0x80)) + +#define DRA7_ATL_SWEN BIT(0) +#define DRA7_ATL_DIVIDER_MASK (0x1f) +#define DRA7_ATL_PCLKMUX BIT(0) +struct dra7_atl_clock_info; + +struct dra7_atl_desc { + struct clk *clk; + struct clk_hw hw; + struct dra7_atl_clock_info *cinfo; + int id; + + bool probed; /* the driver for the IP has been loaded */ + bool valid; /* configured */ + bool enabled; + u32 bws; /* Baseband Word Select Mux */ + u32 aws; /* Audio Word Select Mux */ + u32 divider; /* Cached divider value */ +}; + +struct dra7_atl_clock_info { + struct device *dev; + void __iomem *iobase; + + struct dra7_atl_desc *cdesc; +}; + +#define to_atl_desc(_hw) container_of(_hw, struct dra7_atl_desc, hw) + +static inline void atl_write(struct dra7_atl_clock_info *cinfo, u32 reg, + u32 val) +{ + __raw_writel(val, cinfo->iobase + reg); +} + +static inline int atl_read(struct dra7_atl_clock_info *cinfo, u32 reg) +{ + return __raw_readl(cinfo->iobase + reg); +} + +static int atl_clk_enable(struct clk_hw *hw) +{ + struct dra7_atl_desc *cdesc = to_atl_desc(hw); + + if (!cdesc->probed) + goto out; + + if (unlikely(!cdesc->valid)) + dev_warn(cdesc->cinfo->dev, "atl%d has not been configured\n", + cdesc->id); + pm_runtime_get_sync(cdesc->cinfo->dev); + + atl_write(cdesc->cinfo, DRA7_ATL_ATLCR_REG(cdesc->id), + cdesc->divider - 1); + atl_write(cdesc->cinfo, DRA7_ATL_SWEN_REG(cdesc->id), DRA7_ATL_SWEN); + +out: + cdesc->enabled = true; + + return 0; +} + +static void atl_clk_disable(struct clk_hw *hw) +{ + struct dra7_atl_desc *cdesc = to_atl_desc(hw); + + if (!cdesc->probed) + goto out; + + atl_write(cdesc->cinfo, DRA7_ATL_SWEN_REG(cdesc->id), 0); + pm_runtime_put_sync(cdesc->cinfo->dev); + +out: + cdesc->enabled = false; +} + +static int atl_clk_is_enabled(struct clk_hw *hw) +{ + struct dra7_atl_desc *cdesc = to_atl_desc(hw); + + return cdesc->enabled; +} + +static unsigned long atl_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct dra7_atl_desc *cdesc = to_atl_desc(hw); + + return parent_rate / cdesc->divider; +} + +static long atl_clk_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + unsigned divider; + + divider = (*parent_rate + rate / 2) / rate; + if (divider > DRA7_ATL_DIVIDER_MASK + 1) + divider = DRA7_ATL_DIVIDER_MASK + 1; + + return *parent_rate / divider; +} + +static int atl_clk_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct dra7_atl_desc *cdesc = to_atl_desc(hw); + u32 divider; + + divider = ((parent_rate + rate / 2) / rate) - 1; + if (divider > DRA7_ATL_DIVIDER_MASK) + divider = DRA7_ATL_DIVIDER_MASK; + + cdesc->divider = divider + 1; + + return 0; +} + +const struct clk_ops atl_clk_ops = { + .enable = atl_clk_enable, + .disable = atl_clk_disable, + .is_enabled = atl_clk_is_enabled, + .recalc_rate = atl_clk_recalc_rate, + .round_rate = atl_clk_round_rate, + .set_rate = atl_clk_set_rate, +}; + +static void __init of_dra7_atl_clock_setup(struct device_node *node) +{ + struct dra7_atl_desc *clk_hw = NULL; + struct clk_init_data init = { 0 }; + const char **parent_names = NULL; + struct clk *clk; + + clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL); + if (!clk_hw) { + pr_err("%s: could not allocate dra7_atl_desc\n", __func__); + return; + } + + clk_hw->hw.init = &init; + clk_hw->divider = 1; + init.name = node->name; + init.ops = &atl_clk_ops; + init.flags = CLK_IGNORE_UNUSED; + init.num_parents = of_clk_get_parent_count(node); + + if (init.num_parents != 1) { + pr_err("%s: atl clock %s must have 1 parent\n", __func__, + node->name); + goto cleanup; + } + + parent_names = kzalloc(sizeof(char *), GFP_KERNEL); + + if (!parent_names) + goto cleanup; + + parent_names[0] = of_clk_get_parent_name(node, 0); + + init.parent_names = parent_names; + + clk = clk_register(NULL, &clk_hw->hw); + + if (!IS_ERR(clk)) { + of_clk_add_provider(node, of_clk_src_simple_get, clk); + return; + } +cleanup: + kfree(parent_names); + kfree(clk_hw); +} +CLK_OF_DECLARE(dra7_atl_clock, "ti,dra7-atl-clock", of_dra7_atl_clock_setup); + +static int of_dra7_atl_clk_probe(struct platform_device *pdev) +{ + struct device_node *node = pdev->dev.of_node; + struct dra7_atl_clock_info *cinfo; + int i; + int ret = 0; + + if (!node) + return -ENODEV; + + cinfo = devm_kzalloc(&pdev->dev, sizeof(*cinfo), GFP_KERNEL); + if (!cinfo) + return -ENOMEM; + + cinfo->iobase = of_iomap(node, 0); + cinfo->dev = &pdev->dev; + pm_runtime_enable(cinfo->dev); + + pm_runtime_get_sync(cinfo->dev); + atl_write(cinfo, DRA7_ATL_PCLKMUX_REG(0), DRA7_ATL_PCLKMUX); + + for (i = 0; i < DRA7_ATL_INSTANCES; i++) { + struct device_node *cfg_node; + char prop[5]; + struct dra7_atl_desc *cdesc; + struct of_phandle_args clkspec; + struct clk *clk; + int rc; + + rc = of_parse_phandle_with_args(node, "ti,provided-clocks", + NULL, i, &clkspec); + + if (rc) { + pr_err("%s: failed to lookup atl clock %d\n", __func__, + i); + return -EINVAL; + } + + clk = of_clk_get_from_provider(&clkspec); + + cdesc = to_atl_desc(__clk_get_hw(clk)); + cdesc->cinfo = cinfo; + cdesc->id = i; + + /* Get configuration for the ATL instances */ + snprintf(prop, sizeof(prop), "atl%u", i); + cfg_node = of_find_node_by_name(node, prop); + if (cfg_node) { + ret = of_property_read_u32(cfg_node, "bws", + &cdesc->bws); + ret |= of_property_read_u32(cfg_node, "aws", + &cdesc->aws); + if (!ret) { + cdesc->valid = true; + atl_write(cinfo, DRA7_ATL_BWSMUX_REG(i), + cdesc->bws); + atl_write(cinfo, DRA7_ATL_AWSMUX_REG(i), + cdesc->aws); + } + } + + cdesc->probed = true; + /* + * Enable the clock if it has been asked prior to loading the + * hw driver + */ + if (cdesc->enabled) + atl_clk_enable(__clk_get_hw(clk)); + } + pm_runtime_put_sync(cinfo->dev); + + return ret; +} + +static int of_dra7_atl_clk_remove(struct platform_device *pdev) +{ + pm_runtime_disable(&pdev->dev); + + return 0; +} + +static struct of_device_id of_dra7_atl_clk_match_tbl[] = { + { .compatible = "ti,dra7-atl", }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_dra7_atl_clk_match_tbl); + +static struct platform_driver dra7_atl_clk_driver = { + .driver = { + .name = "dra7-atl", + .owner = THIS_MODULE, + .of_match_table = of_dra7_atl_clk_match_tbl, + }, + .probe = of_dra7_atl_clk_probe, + .remove = of_dra7_atl_clk_remove, +}; + +module_platform_driver(dra7_atl_clk_driver); + +MODULE_DESCRIPTION("Clock driver for DRA7 Audio Tracking Logic"); +MODULE_ALIAS("platform:dra7-atl-clock"); +MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@ti.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c index 7e498a44f97d..abd956d5f838 100644 --- a/drivers/clk/ti/dpll.c +++ b/drivers/clk/ti/dpll.c @@ -25,8 +25,6 @@ #undef pr_fmt #define pr_fmt(fmt) "%s: " fmt, __func__ -#define DPLL_HAS_AUTOIDLE 0x1 - #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ defined(CONFIG_SOC_DRA7XX) static const struct clk_ops dpll_m4xen_ck_ops = { @@ -37,21 +35,18 @@ static const struct clk_ops dpll_m4xen_ck_ops = { .set_rate = &omap3_noncore_dpll_set_rate, .get_parent = &omap2_init_dpll_parent, }; +#else +static const struct clk_ops dpll_m4xen_ck_ops = {}; #endif +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) || \ + defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX) || \ + defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX) static const struct clk_ops dpll_core_ck_ops = { .recalc_rate = &omap3_dpll_recalc, .get_parent = &omap2_init_dpll_parent, }; -#ifdef CONFIG_ARCH_OMAP3 -static const struct clk_ops omap3_dpll_core_ck_ops = { - .get_parent = &omap2_init_dpll_parent, - .recalc_rate = &omap3_dpll_recalc, - .round_rate = &omap2_dpll_round_rate, -}; -#endif - static const struct clk_ops dpll_ck_ops = { .enable = &omap3_noncore_dpll_enable, .disable = &omap3_noncore_dpll_disable, @@ -67,6 +62,33 @@ static const struct clk_ops dpll_no_gate_ck_ops = { .round_rate = &omap2_dpll_round_rate, .set_rate = &omap3_noncore_dpll_set_rate, }; +#else +static const struct clk_ops dpll_core_ck_ops = {}; +static const struct clk_ops dpll_ck_ops = {}; +static const struct clk_ops dpll_no_gate_ck_ops = {}; +const struct clk_hw_omap_ops clkhwops_omap3_dpll = {}; +#endif + +#ifdef CONFIG_ARCH_OMAP2 +static const struct clk_ops omap2_dpll_core_ck_ops = { + .get_parent = &omap2_init_dpll_parent, + .recalc_rate = &omap2_dpllcore_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap2_reprogram_dpllcore, +}; +#else +static const struct clk_ops omap2_dpll_core_ck_ops = {}; +#endif + +#ifdef CONFIG_ARCH_OMAP3 +static const struct clk_ops omap3_dpll_core_ck_ops = { + .get_parent = &omap2_init_dpll_parent, + .recalc_rate = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, +}; +#else +static const struct clk_ops omap3_dpll_core_ck_ops = {}; +#endif #ifdef CONFIG_ARCH_OMAP3 static const struct clk_ops omap3_dpll_ck_ops = { @@ -193,14 +215,12 @@ static void ti_clk_register_dpll_x2(struct device_node *node, * @node: device node containing the DPLL info * @ops: ops for the DPLL * @ddt: DPLL data template to use - * @init_flags: flags for controlling init types * * Initializes a DPLL clock from device tree data. */ static void __init of_ti_dpll_setup(struct device_node *node, const struct clk_ops *ops, - const struct dpll_data *ddt, - u8 init_flags) + const struct dpll_data *ddt) { struct clk_hw_omap *clk_hw = NULL; struct clk_init_data *init = NULL; @@ -241,13 +261,30 @@ static void __init of_ti_dpll_setup(struct device_node *node, init->parent_names = parent_names; dd->control_reg = ti_clk_get_reg_addr(node, 0); - dd->idlest_reg = ti_clk_get_reg_addr(node, 1); - dd->mult_div1_reg = ti_clk_get_reg_addr(node, 2); - if (!dd->control_reg || !dd->idlest_reg || !dd->mult_div1_reg) + /* + * Special case for OMAP2 DPLL, register order is different due to + * missing idlest_reg, also clkhwops is different. Detected from + * missing idlest_mask. + */ + if (!dd->idlest_mask) { + dd->mult_div1_reg = ti_clk_get_reg_addr(node, 1); +#ifdef CONFIG_ARCH_OMAP2 + clk_hw->ops = &clkhwops_omap2xxx_dpll; + omap2xxx_clkt_dpllcore_init(&clk_hw->hw); +#endif + } else { + dd->idlest_reg = ti_clk_get_reg_addr(node, 1); + if (!dd->idlest_reg) + goto cleanup; + + dd->mult_div1_reg = ti_clk_get_reg_addr(node, 2); + } + + if (!dd->control_reg || !dd->mult_div1_reg) goto cleanup; - if (init_flags & DPLL_HAS_AUTOIDLE) { + if (dd->autoidle_mask) { dd->autoidle_reg = ti_clk_get_reg_addr(node, 3); if (!dd->autoidle_reg) goto cleanup; @@ -310,7 +347,7 @@ static void __init of_ti_omap3_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &omap3_dpll_ck_ops, &dd, DPLL_HAS_AUTOIDLE); + of_ti_dpll_setup(node, &omap3_dpll_ck_ops, &dd); } CLK_OF_DECLARE(ti_omap3_dpll_clock, "ti,omap3-dpll-clock", of_ti_omap3_dpll_setup); @@ -329,7 +366,7 @@ static void __init of_ti_omap3_core_dpll_setup(struct device_node *node) .freqsel_mask = 0xf0, }; - of_ti_dpll_setup(node, &omap3_dpll_core_ck_ops, &dd, DPLL_HAS_AUTOIDLE); + of_ti_dpll_setup(node, &omap3_dpll_core_ck_ops, &dd); } CLK_OF_DECLARE(ti_omap3_core_dpll_clock, "ti,omap3-dpll-core-clock", of_ti_omap3_core_dpll_setup); @@ -349,7 +386,7 @@ static void __init of_ti_omap3_per_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd, DPLL_HAS_AUTOIDLE); + of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd); } CLK_OF_DECLARE(ti_omap3_per_dpll_clock, "ti,omap3-dpll-per-clock", of_ti_omap3_per_dpll_setup); @@ -371,7 +408,7 @@ static void __init of_ti_omap3_per_jtype_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd, DPLL_HAS_AUTOIDLE); + of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd); } CLK_OF_DECLARE(ti_omap3_per_jtype_dpll_clock, "ti,omap3-dpll-per-j-type-clock", of_ti_omap3_per_jtype_dpll_setup); @@ -391,11 +428,32 @@ static void __init of_ti_omap4_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &dpll_ck_ops, &dd, DPLL_HAS_AUTOIDLE); + of_ti_dpll_setup(node, &dpll_ck_ops, &dd); } CLK_OF_DECLARE(ti_omap4_dpll_clock, "ti,omap4-dpll-clock", of_ti_omap4_dpll_setup); +static void __init of_ti_omap5_mpu_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .idlest_mask = 0x1, + .enable_mask = 0x7, + .autoidle_mask = 0x7, + .mult_mask = 0x7ff << 8, + .div1_mask = 0x7f, + .max_multiplier = 2047, + .max_divider = 128, + .dcc_mask = BIT(22), + .dcc_rate = 1400000000, /* DCC beyond 1.4GHz */ + .min_divider = 1, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + }; + + of_ti_dpll_setup(node, &dpll_ck_ops, &dd); +} +CLK_OF_DECLARE(of_ti_omap5_mpu_dpll_clock, "ti,omap5-mpu-dpll-clock", + of_ti_omap5_mpu_dpll_setup); + static void __init of_ti_omap4_core_dpll_setup(struct device_node *node) { const struct dpll_data dd = { @@ -410,7 +468,7 @@ static void __init of_ti_omap4_core_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &dpll_core_ck_ops, &dd, DPLL_HAS_AUTOIDLE); + of_ti_dpll_setup(node, &dpll_core_ck_ops, &dd); } CLK_OF_DECLARE(ti_omap4_core_dpll_clock, "ti,omap4-dpll-core-clock", of_ti_omap4_core_dpll_setup); @@ -433,7 +491,7 @@ static void __init of_ti_omap4_m4xen_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &dpll_m4xen_ck_ops, &dd, DPLL_HAS_AUTOIDLE); + of_ti_dpll_setup(node, &dpll_m4xen_ck_ops, &dd); } CLK_OF_DECLARE(ti_omap4_m4xen_dpll_clock, "ti,omap4-dpll-m4xen-clock", of_ti_omap4_m4xen_dpll_setup); @@ -454,7 +512,7 @@ static void __init of_ti_omap4_jtype_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &dpll_m4xen_ck_ops, &dd, DPLL_HAS_AUTOIDLE); + of_ti_dpll_setup(node, &dpll_m4xen_ck_ops, &dd); } CLK_OF_DECLARE(ti_omap4_jtype_dpll_clock, "ti,omap4-dpll-j-type-clock", of_ti_omap4_jtype_dpll_setup); @@ -465,7 +523,6 @@ static void __init of_ti_am3_no_gate_dpll_setup(struct device_node *node) const struct dpll_data dd = { .idlest_mask = 0x1, .enable_mask = 0x7, - .autoidle_mask = 0x7, .mult_mask = 0x7ff << 8, .div1_mask = 0x7f, .max_multiplier = 2047, @@ -474,7 +531,7 @@ static void __init of_ti_am3_no_gate_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &dpll_no_gate_ck_ops, &dd, 0); + of_ti_dpll_setup(node, &dpll_no_gate_ck_ops, &dd); } CLK_OF_DECLARE(ti_am3_no_gate_dpll_clock, "ti,am3-dpll-no-gate-clock", of_ti_am3_no_gate_dpll_setup); @@ -484,7 +541,6 @@ static void __init of_ti_am3_jtype_dpll_setup(struct device_node *node) const struct dpll_data dd = { .idlest_mask = 0x1, .enable_mask = 0x7, - .autoidle_mask = 0x7, .mult_mask = 0x7ff << 8, .div1_mask = 0x7f, .max_multiplier = 4095, @@ -494,7 +550,7 @@ static void __init of_ti_am3_jtype_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &dpll_ck_ops, &dd, 0); + of_ti_dpll_setup(node, &dpll_ck_ops, &dd); } CLK_OF_DECLARE(ti_am3_jtype_dpll_clock, "ti,am3-dpll-j-type-clock", of_ti_am3_jtype_dpll_setup); @@ -504,7 +560,6 @@ static void __init of_ti_am3_no_gate_jtype_dpll_setup(struct device_node *node) const struct dpll_data dd = { .idlest_mask = 0x1, .enable_mask = 0x7, - .autoidle_mask = 0x7, .mult_mask = 0x7ff << 8, .div1_mask = 0x7f, .max_multiplier = 2047, @@ -514,7 +569,7 @@ static void __init of_ti_am3_no_gate_jtype_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &dpll_no_gate_ck_ops, &dd, 0); + of_ti_dpll_setup(node, &dpll_no_gate_ck_ops, &dd); } CLK_OF_DECLARE(ti_am3_no_gate_jtype_dpll_clock, "ti,am3-dpll-no-gate-j-type-clock", @@ -525,7 +580,6 @@ static void __init of_ti_am3_dpll_setup(struct device_node *node) const struct dpll_data dd = { .idlest_mask = 0x1, .enable_mask = 0x7, - .autoidle_mask = 0x7, .mult_mask = 0x7ff << 8, .div1_mask = 0x7f, .max_multiplier = 2047, @@ -534,7 +588,7 @@ static void __init of_ti_am3_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &dpll_ck_ops, &dd, 0); + of_ti_dpll_setup(node, &dpll_ck_ops, &dd); } CLK_OF_DECLARE(ti_am3_dpll_clock, "ti,am3-dpll-clock", of_ti_am3_dpll_setup); @@ -543,7 +597,6 @@ static void __init of_ti_am3_core_dpll_setup(struct device_node *node) const struct dpll_data dd = { .idlest_mask = 0x1, .enable_mask = 0x7, - .autoidle_mask = 0x7, .mult_mask = 0x7ff << 8, .div1_mask = 0x7f, .max_multiplier = 2047, @@ -552,7 +605,22 @@ static void __init of_ti_am3_core_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &dpll_core_ck_ops, &dd, 0); + of_ti_dpll_setup(node, &dpll_core_ck_ops, &dd); } CLK_OF_DECLARE(ti_am3_core_dpll_clock, "ti,am3-dpll-core-clock", of_ti_am3_core_dpll_setup); + +static void __init of_ti_omap2_core_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .enable_mask = 0x3, + .mult_mask = 0x3ff << 12, + .div1_mask = 0xf << 8, + .max_divider = 16, + .min_divider = 1, + }; + + of_ti_dpll_setup(node, &omap2_dpll_core_ck_ops, &dd); +} +CLK_OF_DECLARE(ti_omap2_core_dpll_clock, "ti,omap2-dpll-core-clock", + of_ti_omap2_core_dpll_setup); diff --git a/drivers/clk/ti/gate.c b/drivers/clk/ti/gate.c index 58734817d502..b326d2797feb 100644 --- a/drivers/clk/ti/gate.c +++ b/drivers/clk/ti/gate.c @@ -185,7 +185,7 @@ of_ti_composite_no_wait_gate_clk_setup(struct device_node *node) CLK_OF_DECLARE(ti_composite_no_wait_gate_clk, "ti,composite-no-wait-gate-clock", of_ti_composite_no_wait_gate_clk_setup); -#ifdef CONFIG_ARCH_OMAP3 +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) static void __init of_ti_composite_interface_clk_setup(struct device_node *node) { _of_ti_composite_gate_clk_setup(node, &clkhwops_iclk_wait); diff --git a/drivers/clk/ti/interface.c b/drivers/clk/ti/interface.c index 320a2b168bb2..9c3e8c4aaa40 100644 --- a/drivers/clk/ti/interface.c +++ b/drivers/clk/ti/interface.c @@ -94,6 +94,7 @@ static void __init of_ti_no_wait_interface_clk_setup(struct device_node *node) CLK_OF_DECLARE(ti_no_wait_interface_clk, "ti,omap3-no-wait-interface-clock", of_ti_no_wait_interface_clk_setup); +#ifdef CONFIG_ARCH_OMAP3 static void __init of_ti_hsotgusb_interface_clk_setup(struct device_node *node) { _of_ti_interface_clk_setup(node, @@ -123,3 +124,13 @@ static void __init of_ti_am35xx_interface_clk_setup(struct device_node *node) } CLK_OF_DECLARE(ti_am35xx_interface_clk, "ti,am35xx-interface-clock", of_ti_am35xx_interface_clk_setup); +#endif + +#ifdef CONFIG_SOC_OMAP2430 +static void __init of_ti_omap2430_interface_clk_setup(struct device_node *node) +{ + _of_ti_interface_clk_setup(node, &clkhwops_omap2430_i2chs_wait); +} +CLK_OF_DECLARE(ti_omap2430_interface_clk, "ti,omap2430-interface-clock", + of_ti_omap2430_interface_clk_setup); +#endif diff --git a/include/dt-bindings/clk/ti-dra7-atl.h b/include/dt-bindings/clk/ti-dra7-atl.h new file mode 100644 index 000000000000..42dd4164f6f4 --- /dev/null +++ b/include/dt-bindings/clk/ti-dra7-atl.h @@ -0,0 +1,40 @@ +/* + * This header provides constants for DRA7 ATL (Audio Tracking Logic) + * + * The constants defined in this header are used in dts files + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * Peter Ujfalusi <peter.ujfalusi@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DT_BINDINGS_CLK_DRA7_ATL_H +#define _DT_BINDINGS_CLK_DRA7_ATL_H + +#define DRA7_ATL_WS_MCASP1_FSR 0 +#define DRA7_ATL_WS_MCASP1_FSX 1 +#define DRA7_ATL_WS_MCASP2_FSR 2 +#define DRA7_ATL_WS_MCASP2_FSX 3 +#define DRA7_ATL_WS_MCASP3_FSX 4 +#define DRA7_ATL_WS_MCASP4_FSX 5 +#define DRA7_ATL_WS_MCASP5_FSX 6 +#define DRA7_ATL_WS_MCASP6_FSX 7 +#define DRA7_ATL_WS_MCASP7_FSX 8 +#define DRA7_ATL_WS_MCASP8_FSX 9 +#define DRA7_ATL_WS_MCASP8_AHCLKX 10 +#define DRA7_ATL_WS_XREF_CLK3 11 +#define DRA7_ATL_WS_XREF_CLK0 12 +#define DRA7_ATL_WS_XREF_CLK1 13 +#define DRA7_ATL_WS_XREF_CLK2 14 +#define DRA7_ATL_WS_OSC1_X1 15 + +#endif diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index 4a21a872dbbd..e8d8a35034a5 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -41,6 +41,8 @@ * @idlest_reg: register containing the DPLL idle status bitfield * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg + * @dcc_mask: mask of the DPLL DCC correction bitfield @mult_div1_reg + * @dcc_rate: rate atleast which DCC @dcc_mask must be set * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg * @lpmode_mask: mask of the DPLL low-power mode bitfield in @control_reg * @m4xen_mask: mask of the DPLL M4X multiplier bitfield in @control_reg @@ -86,6 +88,8 @@ struct dpll_data { u32 idlest_mask; u32 dco_mask; u32 sddiv_mask; + u32 dcc_mask; + unsigned long dcc_rate; u32 lpmode_mask; u32 m4xen_mask; u8 auto_recal_bit; @@ -94,7 +98,26 @@ struct dpll_data { u8 flags; }; -struct clk_hw_omap_ops; +struct clk_hw_omap; + +/** + * struct clk_hw_omap_ops - OMAP clk ops + * @find_idlest: find idlest register information for a clock + * @find_companion: find companion clock register information for a clock, + * basically converts CM_ICLKEN* <-> CM_FCLKEN* + * @allow_idle: enables autoidle hardware functionality for a clock + * @deny_idle: prevent autoidle hardware functionality for a clock + */ +struct clk_hw_omap_ops { + void (*find_idlest)(struct clk_hw_omap *oclk, + void __iomem **idlest_reg, + u8 *idlest_bit, u8 *idlest_val); + void (*find_companion)(struct clk_hw_omap *oclk, + void __iomem **other_reg, + u8 *other_bit); + void (*allow_idle)(struct clk_hw_omap *oclk); + void (*deny_idle)(struct clk_hw_omap *oclk); +}; /** * struct clk_hw_omap - OMAP struct clk @@ -259,6 +282,12 @@ int omap2_dflt_clk_enable(struct clk_hw *hw); void omap2_dflt_clk_disable(struct clk_hw *hw); int omap2_dflt_clk_is_enabled(struct clk_hw *hw); void omap3_clk_lock_dpll5(void); +unsigned long omap2_dpllcore_recalc(struct clk_hw *hw, + unsigned long parent_rate); +int omap2_reprogram_dpllcore(struct clk_hw *clk, unsigned long rate, + unsigned long parent_rate); +void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw); +void omap2xxx_clkt_vps_init(void); void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index); void ti_dt_clocks_register(struct ti_dt_clk *oclks); @@ -278,6 +307,8 @@ int omap5xxx_dt_clk_init(void); int dra7xx_dt_clk_init(void); int am33xx_dt_clk_init(void); int am43xx_dt_clk_init(void); +int omap2420_dt_clk_init(void); +int omap2430_dt_clk_init(void); #ifdef CONFIG_OF void of_ti_clk_allow_autoidle_all(void); @@ -287,6 +318,8 @@ static inline void of_ti_clk_allow_autoidle_all(void) { } static inline void of_ti_clk_deny_autoidle_all(void) { } #endif +extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll; +extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait; extern const struct clk_hw_omap_ops clkhwops_omap3_dpll; extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx; extern const struct clk_hw_omap_ops clkhwops_wait; |