diff options
| -rw-r--r-- | Documentation/devicetree/bindings/i2c/i2c-designware.txt | 73 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml | 154 |
2 files changed, 154 insertions, 73 deletions
diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt deleted file mode 100644 index 08be4d3846e5..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt +++ /dev/null @@ -1,73 +0,0 @@ -* Synopsys DesignWare I2C - -Required properties : - - - compatible : should be "snps,designware-i2c" - or "mscc,ocelot-i2c" with "snps,designware-i2c" for fallback - - reg : Offset and length of the register set for the device - - interrupts : <IRQ> where IRQ is the interrupt number. - - clocks : phandles for the clocks, see the description of clock-names below. - The phandle for the "ic_clk" clock is required. The phandle for the "pclk" - clock is optional. If a single clock is specified but no clock-name, it is - the "ic_clk" clock. If both clocks are listed, the "ic_clk" must be first. - -Recommended properties : - - - clock-frequency : desired I2C bus clock frequency in Hz. - -Optional properties : - - - clock-names : Contains the names of the clocks: - "ic_clk", for the core clock used to generate the external I2C clock. - "pclk", the interface clock, required for register access. - - - reg : for "mscc,ocelot-i2c", a second register set to configure the SDA hold - time, named ICPU_CFG:TWI_DELAY in the datasheet. - - - i2c-sda-hold-time-ns : should contain the SDA hold time in nanoseconds. - This option is only supported in hardware blocks version 1.11a or newer and - on Microsemi SoCs ("mscc,ocelot-i2c" compatible). - - - i2c-scl-falling-time-ns : should contain the SCL falling time in nanoseconds. - This value which is by default 300ns is used to compute the tLOW period. - - - i2c-sda-falling-time-ns : should contain the SDA falling time in nanoseconds. - This value which is by default 300ns is used to compute the tHIGH period. - -Examples : - - i2c@f0000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,designware-i2c"; - reg = <0xf0000 0x1000>; - interrupts = <11>; - clock-frequency = <400000>; - }; - - i2c@1120000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,designware-i2c"; - reg = <0x1120000 0x1000>; - interrupt-parent = <&ictl>; - interrupts = <12 1>; - clock-frequency = <400000>; - i2c-sda-hold-time-ns = <300>; - i2c-sda-falling-time-ns = <300>; - i2c-scl-falling-time-ns = <300>; - }; - - i2c@1120000 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x2000 0x100>; - clock-frequency = <400000>; - clocks = <&i2cclk>; - interrupts = <0>; - - eeprom@64 { - compatible = "linux,slave-24c02"; - reg = <0x40000064>; - }; - }; diff --git a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml new file mode 100644 index 000000000000..4bd430b2b41d --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml @@ -0,0 +1,154 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/snps,designware-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare APB I2C Controller + +maintainers: + - Jarkko Nikula <jarkko.nikula@linux.intel.com> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + - if: + properties: + compatible: + not: + contains: + const: mscc,ocelot-i2c + then: + properties: + reg: + maxItems: 1 + +properties: + compatible: + oneOf: + - description: Generic Synopsys DesignWare I2C controller + const: snps,designware-i2c + - description: Microsemi Ocelot SoCs I2C controller + items: + - const: mscc,ocelot-i2c + - const: snps,designware-i2c + + reg: + minItems: 1 + items: + - description: DW APB I2C controller memory mapped registers + - description: | + ICPU_CFG:TWI_DELAY registers to setup the SDA hold time. + This registers are specific to the Ocelot I2C-controller. + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: I2C controller reference clock source + - description: APB interface clock source + + clock-names: + minItems: 1 + items: + - const: ref + - const: pclk + + resets: + maxItems: 1 + + clock-frequency: + description: Desired I2C bus clock frequency in Hz + enum: [100000, 400000, 1000000, 3400000] + default: 400000 + + i2c-sda-hold-time-ns: + maxItems: 1 + description: | + The property should contain the SDA hold time in nanoseconds. This option + is only supported in hardware blocks version 1.11a or newer or on + Microsemi SoCs. + + i2c-scl-falling-time-ns: + maxItems: 1 + description: | + The property should contain the SCL falling time in nanoseconds. + This value is used to compute the tLOW period. + default: 300 + + i2c-sda-falling-time-ns: + maxItems: 1 + description: | + The property should contain the SDA falling time in nanoseconds. + This value is used to compute the tHIGH period. + default: 300 + + dmas: + items: + - description: TX DMA Channel + - description: RX DMA Channel + + dma-names: + items: + - const: tx + - const: rx + +unevaluatedProperties: false + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - interrupts + +examples: + - | + i2c@f0000 { + compatible = "snps,designware-i2c"; + reg = <0xf0000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <11>; + clock-frequency = <400000>; + }; + - | + i2c@1120000 { + compatible = "snps,designware-i2c"; + reg = <0x1120000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <12 1>; + clock-frequency = <400000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <300>; + i2c-scl-falling-time-ns = <300>; + }; + - | + i2c@2000 { + compatible = "snps,designware-i2c"; + reg = <0x2000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&i2cclk>; + interrupts = <0>; + + eeprom@64 { + compatible = "linux,slave-24c02"; + reg = <0x40000064>; + }; + }; + - | + i2c@100400 { + compatible = "mscc,ocelot-i2c", "snps,designware-i2c"; + reg = <0x100400 0x100>, <0x198 0x8>; + pinctrl-0 = <&i2c_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <8>; + clocks = <&ahb_clk>; + }; +... |