diff options
| -rw-r--r-- | Documentation/powerpc/booting-without-of.txt | 156 | ||||
| -rw-r--r-- | arch/powerpc/platforms/44x/Kconfig | 3 | ||||
| -rw-r--r-- | arch/powerpc/platforms/cell/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/net/Kconfig | 71 | ||||
| -rw-r--r-- | drivers/net/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/ibm_emac/Kconfig | 70 | ||||
| -rw-r--r-- | drivers/net/ibm_newemac/Kconfig | 63 | ||||
| -rw-r--r-- | drivers/net/ibm_newemac/Makefile | 11 | ||||
| -rw-r--r-- | drivers/net/ibm_newemac/core.c | 2907 | ||||
| -rw-r--r-- | drivers/net/ibm_newemac/core.h | 355 | ||||
| -rw-r--r-- | drivers/net/ibm_newemac/debug.c | 238 | ||||
| -rw-r--r-- | drivers/net/ibm_newemac/debug.h | 78 | ||||
| -rw-r--r-- | drivers/net/ibm_newemac/emac.h | 268 | ||||
| -rw-r--r-- | drivers/net/ibm_newemac/mal.c | 728 | ||||
| -rw-r--r-- | drivers/net/ibm_newemac/mal.h | 276 | ||||
| -rw-r--r-- | drivers/net/ibm_newemac/phy.c | 373 | ||||
| -rw-r--r-- | drivers/net/ibm_newemac/phy.h | 80 | ||||
| -rw-r--r-- | drivers/net/ibm_newemac/rgmii.c | 323 | ||||
| -rw-r--r-- | drivers/net/ibm_newemac/rgmii.h | 76 | ||||
| -rw-r--r-- | drivers/net/ibm_newemac/tah.c | 173 | ||||
| -rw-r--r-- | drivers/net/ibm_newemac/tah.h | 90 | ||||
| -rw-r--r-- | drivers/net/ibm_newemac/zmii.c | 322 | ||||
| -rw-r--r-- | drivers/net/ibm_newemac/zmii.h | 73 |
23 files changed, 6668 insertions, 71 deletions
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index 76733a3962f0..838fd323e797 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -1824,6 +1824,162 @@ platforms are moved over to use the flattened-device-tree model. fsl,has-rstcr; }; + + h) 4xx/Axon EMAC ethernet nodes + + The EMAC ethernet controller in IBM and AMCC 4xx chips, and also + the Axon bridge. To operate this needs to interact with a ths + special McMAL DMA controller, and sometimes an RGMII or ZMII + interface. In addition to the nodes and properties described + below, the node for the OPB bus on which the EMAC sits must have a + correct clock-frequency property. + + i) The EMAC node itself + + Required properties: + - device_type : "network" + + - compatible : compatible list, contains 2 entries, first is + "ibm,emac-CHIP" where CHIP is the host ASIC (440gx, + 405gp, Axon) and second is either "ibm,emac" or + "ibm,emac4". For Axon, thus, we have: "ibm,emac-axon", + "ibm,emac4" + - interrupts : <interrupt mapping for EMAC IRQ and WOL IRQ> + - interrupt-parent : optional, if needed for interrupt mapping + - reg : <registers mapping> + - local-mac-address : 6 bytes, MAC address + - mal-device : phandle of the associated McMAL node + - mal-tx-channel : 1 cell, index of the tx channel on McMAL associated + with this EMAC + - mal-rx-channel : 1 cell, index of the rx channel on McMAL associated + with this EMAC + - cell-index : 1 cell, hardware index of the EMAC cell on a given + ASIC (typically 0x0 and 0x1 for EMAC0 and EMAC1 on + each Axon chip) + - max-frame-size : 1 cell, maximum frame size supported in bytes + - rx-fifo-size : 1 cell, Rx fifo size in bytes for 10 and 100 Mb/sec + operations. + For Axon, 2048 + - tx-fifo-size : 1 cell, Tx fifo size in bytes for 10 and 100 Mb/sec + operations. + For Axon, 2048. + - fifo-entry-size : 1 cell, size of a fifo entry (used to calculate + thresholds). + For Axon, 0x00000010 + - mal-burst-size : 1 cell, MAL burst size (used to calculate thresholds) + in bytes. + For Axon, 0x00000100 (I think ...) + - phy-mode : string, mode of operations of the PHY interface. + Supported values are: "mii", "rmii", "smii", "rgmii", + "tbi", "gmii", rtbi", "sgmii". + For Axon on CAB, it is "rgmii" + - mdio-device : 1 cell, required iff using shared MDIO registers + (440EP). phandle of the EMAC to use to drive the + MDIO lines for the PHY used by this EMAC. + - zmii-device : 1 cell, required iff connected to a ZMII. phandle of + the ZMII device node + - zmii-channel : 1 cell, required iff connected to a ZMII. Which ZMII + channel or 0xffffffff if ZMII is only used for MDIO. + - rgmii-device : 1 cell, required iff connected to an RGMII. phandle + of the RGMII device node. + For Axon: phandle of plb5/plb4/opb/rgmii + - rgmii-channel : 1 cell, required iff connected to an RGMII. Which + RGMII channel is used by this EMAC. + Fox Axon: present, whatever value is appropriate for each + EMAC, that is the content of the current (bogus) "phy-port" + property. + + Recommended properties: + - linux,network-index : This is the intended "index" of this + network device. This is used by the bootwrapper to interpret + MAC addresses passed by the firmware when no information other + than indices is available to associate an address with a device. + + Optional properties: + - phy-address : 1 cell, optional, MDIO address of the PHY. If absent, + a search is performed. + - phy-map : 1 cell, optional, bitmap of addresses to probe the PHY + for, used if phy-address is absent. bit 0x00000001 is + MDIO address 0. + For Axon it can be absent, thouugh my current driver + doesn't handle phy-address yet so for now, keep + 0x00ffffff in it. + - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec + operations (if absent the value is the same as + rx-fifo-size). For Axon, either absent or 2048. + - tx-fifo-size-gige : 1 cell, Tx fifo size in bytes for 1000 Mb/sec + operations (if absent the value is the same as + tx-fifo-size). For Axon, either absent or 2048. + - tah-device : 1 cell, optional. If connected to a TAH engine for + offload, phandle of the TAH device node. + - tah-channel : 1 cell, optional. If appropriate, channel used on the + TAH engine. + + Example: + + EMAC0: ethernet@40000800 { + linux,network-index = <0>; + device_type = "network"; + compatible = "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <1c 4 1d 4>; + reg = <40000800 70>; + local-mac-address = [00 04 AC E3 1B 1E]; + mal-device = <&MAL0>; + mal-tx-channel = <0 1>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rmii"; + phy-map = <00000001>; + zmii-device = <&ZMII0>; + zmii-channel = <0>; + }; + + ii) McMAL node + + Required properties: + - device_type : "dma-controller" + - compatible : compatible list, containing 2 entries, first is + "ibm,mcmal-CHIP" where CHIP is the host ASIC (like + emac) and the second is either "ibm,mcmal" or + "ibm,mcmal2". + For Axon, "ibm,mcmal-axon","ibm,mcmal2" + - interrupts : <interrupt mapping for the MAL interrupts sources: + 5 sources: tx_eob, rx_eob, serr, txde, rxde>. + For Axon: This is _different_ from the current + firmware. We use the "delayed" interrupts for txeob + and rxeob. Thus we end up with mapping those 5 MPIC + interrupts, all level positive sensitive: 10, 11, 32, + 33, 34 (in decimal) + - dcr-reg : < DCR registers range > + - dcr-parent : if needed for dcr-reg + - num-tx-chans : 1 cell, number of Tx channels + - num-rx-chans : 1 cell, number of Rx channels + + iii) ZMII node + + Required properties: + - compatible : compatible list, containing 2 entries, first is + "ibm,zmii-CHIP" where CHIP is the host ASIC (like + EMAC) and the second is "ibm,zmii". + For Axon, there is no ZMII node. + - reg : <registers mapping> + + iv) RGMII node + + Required properties: + - compatible : compatible list, containing 2 entries, first is + "ibm,rgmii-CHIP" where CHIP is the host ASIC (like + EMAC) and the second is "ibm,rgmii". + For Axon, "ibm,rgmii-axon","ibm,rgmii" + - reg : <registers mapping> + - revision : as provided by the RGMII new version register if + available. + For Axon: 0x0000012a + More devices will be defined as this spec matures. VII - Specifying interrupt information for devices diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 1b3e008fd148..8e66949e7c67 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -38,8 +38,7 @@ config 440EP config 440GP bool -# Disabled until the new EMAC Driver is merged. -# select IBM_NEW_EMAC_ZMII + select IBM_NEW_EMAC_ZMII config 440GX bool diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig index ac8032034fb8..e1e2f6a43019 100644 --- a/arch/powerpc/platforms/cell/Kconfig +++ b/arch/powerpc/platforms/cell/Kconfig @@ -10,6 +10,10 @@ config PPC_CELL_NATIVE select PPC_INDIRECT_IO select PPC_NATIVE select MPIC + select IBM_NEW_EMAC_EMAC4 + select IBM_NEW_EMAC_RGMII + select IBM_NEW_EMAC_ZMII #test only + select IBM_NEW_EMAC_TAH #test only default n config PPC_IBM_CELL_BLADE diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 9dc4a80a6acd..cfa97f3fbebd 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1247,75 +1247,8 @@ config IBMVETH <file:Documentation/networking/net-modules.txt>. The module will be called ibmveth. -config IBM_EMAC - tristate "PowerPC 4xx on-chip Ethernet support" - depends on 4xx && !PPC_MERGE - help - This driver supports the PowerPC 4xx EMAC family of on-chip - Ethernet controllers. - -config IBM_EMAC_RXB - int "Number of receive buffers" - depends on IBM_EMAC - default "128" - -config IBM_EMAC_TXB - int "Number of transmit buffers" - depends on IBM_EMAC - default "64" - -config IBM_EMAC_POLL_WEIGHT - int "MAL NAPI polling weight" - depends on IBM_EMAC - default "32" - -config IBM_EMAC_RX_COPY_THRESHOLD - int "RX skb copy threshold (bytes)" - depends on IBM_EMAC - default "256" - -config IBM_EMAC_RX_SKB_HEADROOM - int "Additional RX skb headroom (bytes)" - depends on IBM_EMAC - default "0" - help - Additional receive skb headroom. Note, that driver - will always reserve at least 2 bytes to make IP header - aligned, so usually there is no need to add any additional - headroom. - - If unsure, set to 0. - -config IBM_EMAC_PHY_RX_CLK_FIX - bool "PHY Rx clock workaround" - depends on IBM_EMAC && (405EP || 440GX || 440EP || 440GR) - help - Enable this if EMAC attached to a PHY which doesn't generate - RX clock if there is no link, if this is the case, you will - see "TX disable timeout" or "RX disable timeout" in the system - log. - - If unsure, say N. - -config IBM_EMAC_DEBUG - bool "Debugging" - depends on IBM_EMAC - default n - -config IBM_EMAC_ZMII - bool - depends on IBM_EMAC && (NP405H || NP405L || 44x) - default y - -config IBM_EMAC_RGMII - bool - depends on IBM_EMAC && 440GX - default y - -config IBM_EMAC_TAH - bool - depends on IBM_EMAC && 440GX - default y +source "drivers/net/ibm_emac/Kconfig" +source "drivers/net/ibm_newemac/Kconfig" config NET_PCI bool "EISA, VLB, PCI and on board controllers" diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 2ab33e8b9159..9cbef5829870 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_E1000) += e1000/ obj-$(CONFIG_E1000E) += e1000e/ obj-$(CONFIG_IBM_EMAC) += ibm_emac/ +obj-$(CONFIG_IBM_NEW_EMAC) += ibm_newemac/ obj-$(CONFIG_IXGBE) += ixgbe/ obj-$(CONFIG_IXGB) += ixgb/ obj-$(CONFIG_IP1000) += ipg.o diff --git a/drivers/net/ibm_emac/Kconfig b/drivers/net/ibm_emac/Kconfig new file mode 100644 index 000000000000..f61c48047dc0 --- /dev/null +++ b/drivers/net/ibm_emac/Kconfig @@ -0,0 +1,70 @@ +config IBM_EMAC + tristate "PowerPC 4xx on-chip Ethernet support" + depends on 4xx && !PPC_MERGE + help + This driver supports the PowerPC 4xx EMAC family of on-chip + Ethernet controllers. + +config IBM_EMAC_RXB + int "Number of receive buffers" + depends on IBM_EMAC + default "128" + +config IBM_EMAC_TXB + int "Number of transmit buffers" + depends on IBM_EMAC + default "64" + +config IBM_EMAC_POLL_WEIGHT + int "MAL NAPI polling weight" + depends on IBM_EMAC + default "32" + +config IBM_EMAC_RX_COPY_THRESHOLD + int "RX skb copy threshold (bytes)" + depends on IBM_EMAC + default "256" + +config IBM_EMAC_RX_SKB_HEADROOM + int "Additional RX skb headroom (bytes)" + depends on IBM_EMAC + default "0" + help + Additional receive skb headroom. Note, that driver + will always reserve at least 2 bytes to make IP header + aligned, so usually there is no need to add any additional + headroom. + + If unsure, set to 0. + +config IBM_EMAC_PHY_RX_CLK_FIX + bool "PHY Rx clock workaround" + depends on IBM_EMAC && (405EP || 440GX || 440EP || 440GR) + help + Enable this if EMAC attached to a PHY which doesn't generate + RX clock if there is no link, if this is the case, you will + see "TX disable timeout" or "RX disable timeout" in the system + log. + + If unsure, say N. + +config IBM_EMAC_DEBUG + bool "Debugging" + depends on IBM_EMAC + default n + +config IBM_EMAC_ZMII + bool + depends on IBM_EMAC && (NP405H || NP405L || 44x) + default y + +config IBM_EMAC_RGMII + bool + depends on IBM_EMAC && 440GX + default y + +config IBM_EMAC_TAH + bool + depends on IBM_EMAC && 440GX + default y + diff --git a/drivers/net/ibm_newemac/Kconfig b/drivers/net/ibm_newemac/Kconfig new file mode 100644 index 000000000000..0d3e7380bad0 --- /dev/null +++ b/drivers/net/ibm_newemac/Kconfig @@ -0,0 +1,63 @@ +config IBM_NEW_EMAC + tristate "IBM EMAC Ethernet support" + depends on PPC_DCR && PPC_MERGE + help + This driver supports the IBM EMAC family of Ethernet controllers + typically found on 4xx embedded PowerPC chips, but also on the + Axon southbridge for Cell. + +config IBM_NEW_EMAC_RXB + int "Number of receive buffers" + depends on IBM_NEW_EMAC + default "128" + +config IBM_NEW_EMAC_TXB + int "Number of transmit buffers" + depends on IBM_NEW_EMAC + default "64" + +config IBM_NEW_EMAC_POLL_WEIGHT + int "MAL NAPI polling weight" + depends on IBM_NEW_EMAC + default "32" + +config IBM_NEW_EMAC_RX_COPY_THRESHOLD + int "RX skb copy threshold (bytes)" + depends on IBM_NEW_EMAC + default "256" + +config IBM_NEW_EMAC_RX_SKB_HEADROOM + int "Additional RX skb headroom (bytes)" + depends on IBM_NEW_EMAC + default "0" + help + Additional receive skb headroom. Note, that driver + will always reserve at least 2 bytes to make IP header + aligned, so usually there is no need to add any additional + headroom. + + If unsure, set to 0. + +config IBM_NEW_EMAC_DEBUG + bool "Debugging" + depends on IBM_NEW_EMAC + default n + +# The options below has to be select'ed by the respective +# processor types or platforms + +config IBM_NEW_EMAC_ZMII + bool + default n + +config IBM_NEW_EMAC_RGMII + bool + default n + +config IBM_NEW_EMAC_TAH + bool + default n + +config IBM_NEW_EMAC_EMAC4 + bool + default n diff --git a/drivers/net/ibm_newemac/Makefile b/drivers/net/ibm_newemac/Makefile new file mode 100644 index 000000000000..0b5c99512762 --- /dev/null +++ b/drivers/net/ibm_newemac/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for the PowerPC 4xx on-chip ethernet driver +# + +obj-$(CONFIG_IBM_NEW_EMAC) += ibm_newemac.o + +ibm_newemac-y := mal.o core.o phy.o +ibm_newemac-$(CONFIG_IBM_NEW_EMAC_ZMII) += zmii.o +ibm_newemac-$(CONFIG_IBM_NEW_EMAC_RGMII) += rgmii.o +ibm_newemac-$(CONFIG_IBM_NEW_EMAC_TAH) += tah.o +ibm_newemac-$(CONFIG_IBM_NEW_EMAC_DEBUG) += debug.o diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c new file mode 100644 index 000000000000..653bfdc291e0 --- /dev/null +++ b/drivers/net/ibm_newemac/core.c @@ -0,0 +1,2907 @@ +/* + * drivers/net/ibm_newemac/core.c + * + * Driver for PowerPC 4xx on-chip ethernet controller. + * + * Copyright (c) 2004, 2005 Zultys Technologies. + * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> + * + * Based on original work by + * Matt Porter <mporter@kernel.crashing.org> + * (c) 2003 Benjamin Herrenschmidt <benh@kernel.crashing.org> + * Armin Kuster <akuster@mvista.com> + * Johnnie Peters <jpeters@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/sched.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/crc32.h> +#include <linux/ethtool.h> +#include <linux/mii.h> +#include <linux/bitops.h> +#include <linux/workqueue.h> + +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/dma.h> +#include <asm/uaccess.h> + +#include "core.h" + +/* + * Lack of dma_unmap_???? calls is intentional. + * + * API-correct usage requires additional support state information to be + * maintained for every RX and TX buffer descriptor (BD). Unfortunately, due to + * EMAC design (e.g. TX buffer passed from network stack can be split into + * several BDs, dma_map_single/dma_map_page can be used to map particular BD), + * maintaining such information will add additional overhead. + * Current DMA API implementation for 4xx processors only ensures cache coherency + * and dma_unmap_???? routines are empty and are likely to stay this way. + * I decided to omit dma_unmap_??? calls because I don't want to add additional + * complexity just for the sake of following some abstract API, when it doesn't + * add any real benefit to the driver. I understand that this decision maybe + * controversial, but I really tried to make code API-correct and efficient + * at the same time and didn't come up with code I liked :(. --ebs + */ + +#define DRV_NAME "emac" +#define DRV_VERSION "3.54" +#define DRV_DESC "PPC 4xx OCP EMAC driver" + +MODULE_DESCRIPTION(DRV_DESC); +MODULE_AUTHOR + ("Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>"); +MODULE_LICENSE("GPL"); + +/* + * PPC64 doesn't (yet) have a cacheable_memcpy + */ +#ifdef CONFIG_PPC64 +#define cacheable_memcpy(d,s,n) memcpy((d),(s),(n)) +#endif + +/* minimum number of free TX descriptors required to wake up TX process */ +#define EMAC_TX_WAKEUP_THRESH (NUM_TX_BUFF / 4) + +/* If packet size is less than this number, we allocate small skb and copy packet + * contents into it instead of just sending original big skb up + */ +#define EMAC_RX_COPY_THRESH CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD + +/* Since multiple EMACs share MDIO lines in various ways, we need + * to avoid re-using the same PHY ID in cases where the arch didn't + * setup precise phy_map entries + * + * XXX This is something that needs to be reworked as we can have multiple + * EMAC "sets" (multiple ASICs containing several EMACs) though we can + * probably require in that case to have explicit PHY IDs in the device-tree + */ +static u32 busy_phy_map; +static DEFINE_MUTEX(emac_phy_map_lock); + +/* This is the wait queue used to wait on any event related to probe, that + * is discovery of MALs, other EMACs, ZMII/RGMIIs, etc... + */ +static DECLARE_WAIT_QUEUE_HEAD(emac_probe_wait); + +/* Having stable interface names is a doomed idea. However, it would be nice + * if we didn't have completely random interface names at boot too :-) It's + * just a matter of making everybody's life easier. Since we are doing + * threaded probing, it's a bit harder though. The base idea here is that + * we make up a list of all emacs in the device-tree before we register the + * driver. Every emac will then wait for the previous one in the list to + * initialize before itself. We should also keep that list ordered by + * cell_index. + * That list is only 4 entries long, meaning that additional EMACs don't + * get ordering guarantees unless EMAC_BOOT_LIST_SIZE is increased. + */ + +#define EMAC_BOOT_LIST_SIZE 4 +static struct device_node *emac_boot_list[EMAC_BOOT_LIST_SIZE]; + +/* How long should I wait for dependent devices ? */ +#define EMAC_PROBE_DEP_TIMEOUT (HZ * 5) + +/* I don't want to litter system log with timeout errors + * when we have brain-damaged PHY. + */ +static inline void emac_report_timeout_error(struct emac_instance *dev, + const char *error) +{ + if (net_ratelimit()) + printk(KERN_ERR "%s: %s\n", dev->ndev->name, error); +} + +/* PHY polling intervals */ +#define PHY_POLL_LINK_ON HZ +#define PHY_POLL_LINK_OFF (HZ / 5) + +/* Graceful stop timeouts in us. + * We should allow up to 1 frame time (full-duplex, ignoring collisions) + */ +#define STOP_TIMEOUT_10 1230 +#define STOP_TIMEOUT_100 124 +#define STOP_TIMEOUT_1000 13 +#define STOP_TIMEOUT_1000_JUMBO 73 + +/* Please, keep in sync with struct ibm_emac_stats/ibm_emac_error_stats */ +static const char emac_stats_keys[EMAC_ETHTOOL_STATS_COUNT][ETH_GSTRING_LEN] = { + "rx_packets", "rx_bytes", "tx_packets", "tx_bytes", "rx_packets_csum", + "tx_packets_csum", "tx_undo", "rx_dropped_stack", "rx_dropped_oom", + "rx_dropped_error", "rx_dropped_resize", "rx_dropped_mtu", + "rx_stopped", "rx_bd_errors", "rx_bd_overrun", "rx_bd_bad_packet", + "rx_bd_runt_packet", "rx_bd_short_event", "rx_bd_alignment_error", + "rx_bd_bad_fcs", "rx_bd_packet_too_long", "rx_bd_out_of_range", + "rx_bd_in_range", "rx_parity", "rx_fifo_overrun", "rx_overrun", + "rx_bad_packet", "rx_runt_packet", "rx_short_event", + "rx_alignment_error", "rx_bad_fcs", "rx_packet_too_long", + "rx_out_of_range", "rx_in_range", "tx_dropped", "tx_bd_errors", + "tx_bd_bad_fcs", "tx_bd_carrier_loss", "tx_bd_excessive_deferral", + "tx_bd_excessive_collisions", "tx_bd_late_collision", + "tx_bd_multple_collisions", "tx_bd_single_collision", + "tx_bd_underrun", "tx_bd_sqe", "tx_parity", "tx_underrun", "tx_sqe", + "tx_errors" +}; + +static irqreturn_t emac_irq(int irq, void *dev_instance); +static void emac_clean_tx_ring(struct emac_instance *dev); +static void __emac_set_multicast_list(struct emac_instance *dev); + +static inline int emac_phy_supports_gige(int phy_mode) +{ + return phy_mode == PHY_MODE_GMII || + phy_mode == PHY_MODE_RGMII || + phy_mode == PHY_MODE_TBI || + phy_mode == PHY_MODE_RTBI; +} + +static inline int emac_phy_gpcs(int phy_mode) +{ + return phy_mode == PHY_MODE_TBI || + phy_mode == PHY_MODE_RTBI; +} + +static inline void emac_tx_enable(struct emac_instance *dev) +{ + struct emac_regs __iomem *p = dev->emacp; + u32 r; + + DBG(dev, "tx_enable" NL); + + r = in_be32(&p->mr0); + if (!(r & EMAC_MR0_TXE)) + out_be32(&p->mr0, r | EMAC_MR0_TXE); +} + +static void emac_tx_disable(struct emac_instance *dev) +{ + struct emac_regs __iomem *p = dev->emacp; + u32 r; + + DBG(dev, "tx_disable" NL); + + r = in_be32(&p->mr0); + if (r & EMAC_MR0_TXE) { + int n = dev->stop_timeout; + out_be32(&p->mr0, r & ~EMAC_MR0_TXE); + while (!(in_be32(&p->mr0) & EMAC_MR0_TXI) && n) { + udelay(1); + --n; + } + if (unlikely(!n)) + emac_report_timeout_error(dev, "TX disable timeout"); + } +} + +static void emac_rx_enable(struct emac_instance *dev) +{ + struct emac_regs __iomem *p = dev->emacp; + u32 r; + + if (unlikely(test_bit(MAL_COMMAC_RX_STOPPED, &dev->commac.flags))) + goto out; + + DBG(dev, "rx_enable" NL); + + r = in_be32(&p->mr0); + if (!(r & EMAC_MR0_RXE)) { + if (unlikely(!(r & EMAC_MR0_RXI))) { + /* Wait if previous async disable is still in progress */ + int n = dev->stop_timeout; + while (!(r = in_be32(&p->mr0) & EMAC_MR0_RXI) && n) { + udelay(1); + --n; + } + if (unlikely(!n)) + emac_report_timeout_error(dev, + "RX disable timeout"); + } + out_be32(&p->mr0, r | EMAC_MR0_RXE); + } + out: + ; +} + +static void emac_rx_disable(struct emac_instance *dev) +{ + struct emac_regs __iomem *p = dev->emacp; + u32 r; + + DBG(dev, "rx_disable" NL); + + r = in_be32(&p->mr0); + if (r & EMAC_MR0_RXE) { + int n = dev->stop_timeout; + out_be32(&p->mr0, r & ~EMAC_MR0_RXE); + while (!(in_be32(&p->mr0) & EMAC_MR0_RXI) && n) { + udelay(1); + --n; + } + if (unlikely(!n)) + emac_report_timeout_error(dev, "RX disable timeout"); + } +} + +static inline void emac_netif_stop(struct emac_instance *dev) +{ + netif_tx_lock_bh(dev->ndev); + dev->no_mcast = 1; + netif_tx_unlock_bh(dev->ndev); + dev->ndev->trans_start = jiffies; /* prevent tx timeout */ + mal_poll_disable(dev->mal, &dev->commac); + netif_tx_disable(dev->ndev); +} + +static inline void emac_netif_start(struct emac_instance *dev) +{ + netif_tx_lock_bh(dev->ndev); + dev->no_mcast = 0; + if (dev->mcast_pending && netif_running(dev->ndev)) + __emac_set_multicast_list(dev); + netif_tx_unlock_bh(dev->ndev); + + netif_wake_queue(dev->ndev); + + /* NOTE: unconditional netif_wake_queue is only appropriate + * so long as all callers are assured to have free tx slots + * (taken from tg3... though the case where that is wrong is + * not terribly harmful) + */ + mal_poll_enable(dev->mal, &dev->commac); +} + +static inline void emac_rx_disable_async(struct emac_instance *dev) +{ + struct emac_regs __iomem *p = dev->emacp; + u32 r; + + DBG(dev, "rx_disable_async" NL); + + r = in_be32(&p->mr0); + if (r & EMAC_MR0_RXE) + out_be32(&p->mr0, r & ~EMAC_MR0_RXE); +} + +static int emac_reset(struct emac_instance *dev) +{ + struct emac_regs __iomem *p = dev->emacp; + int n = 20; + + DBG(dev, "reset" NL); + + if (!dev->reset_failed) { + /* 40x erratum suggests stopping RX channel before reset, + * we stop TX as well + */ + emac_rx_disable(dev); + emac_tx_disable(dev); + } + + out_be32(&p->mr0, EMAC_MR0_SRST); + while ((in_be32(&p->mr0) & EMAC_MR0_SRST) && n) + --n; + + if (n) { + dev->reset_failed = 0; + return 0; + } else { + emac_report_timeout_error(dev, "reset timeout"); + dev->reset_failed = 1; + return -ETIMEDOUT; + } +} + +static void emac_hash_mc(struct emac_instance *dev) +{ + struct emac_regs __iomem *p = dev->emacp; + u16 gaht[4] = { 0 }; + struct dev_mc_list *dmi; + + DBG(dev, "hash_mc %d" NL, dev->ndev->mc_count); + + for (dmi = dev->ndev->mc_list; dmi; dmi = dmi->next) { + int bit; + DBG2(dev, "mc %02x:%02x:%02x:%02x:%02x:%02x" NL, + dmi->dmi_addr[0], dmi->dmi_addr[1], dmi->dmi_addr[2], + dmi->dmi_addr[3], dmi->dmi_addr[4], dmi->dmi_addr[5]); + + bit = 63 - (ether_crc(ETH_ALEN, dmi->dmi_addr) >> 26); + gaht[bit >> 4] |= 0x8000 >> (bit & 0x0f); + } + out_be32(&p->gaht1, gaht[0]); + out_be32(&p->gaht2, gaht[1]); + out_be32(&p->gaht3, gaht[2]); + out_be32(&p->gaht4, gaht[3]); +} + +static inline u32 emac_iff2rmr(struct net_device *ndev) +{ + struct emac_instance *dev = netdev_priv(ndev); + u32 r; + + r = EMAC_RMR_SP | EMAC_RMR_SFCS | EMAC_RMR_IAE | EMAC_RMR_BAE; + + if (emac_has_feature(dev, EMAC_FTR_EMAC4)) + r |= EMAC4_RMR_BASE; + else + r |= EMAC_RMR_BASE; + + if (ndev->flags & IFF_PROMISC) + r |= EMAC_RMR_PME; + else if (ndev->flags & IFF_ALLMULTI || ndev->mc_count > 32) + r |= EMAC_RMR_PMME; + else if (ndev->mc_count > 0) + r |= EMAC_RMR_MAE; + + return r; +} + +static u32 __emac_calc_base_mr1(struct emac_instance *dev, int tx_size, int rx_size) +{ + u32 ret = EMAC_MR1_VLE | EMAC_MR1_IST | EMAC_MR1_TR0_MULT; + + DBG2(dev, "__emac_calc_base_mr1" NL); + + switch(tx_size) { + case 2048: + ret |= EMAC_MR1_TFS_2K; + break; + default: + printk(KERN_WARNING "%s: Unknown Rx FIFO size %d\n", + dev->ndev->name, tx_size); + } + + switch(rx_size) { + case 16384: + ret |= EMAC_MR1_RFS_16K; + break; + case 4096: + ret |= EMAC_MR1_RFS_4K; + break; + default: + printk(KERN_WARNING "%s: Unknown Rx FIFO size %d\n", + dev->ndev->name, rx_size); + } + + return ret; +} + +static u32 __emac4_calc_base_mr1(struct emac_instance *dev, int tx_size, int rx_size) +{ + u32 ret = EMAC_MR1_VLE | EMAC_MR1_IST | EMAC4_MR1_TR | + EMAC4_MR1_OBCI(dev->opb_bus_freq); + + DBG2(dev, "__emac4_calc_base_mr1" NL); + + switch(tx_size) { + case 4096: + ret |= EMAC4_MR1_TFS_4K; + break; + case 2048: + ret |= EMAC4_MR1_TFS_2K; + break; + default: + printk(KERN_WARNING "%s: Unknown Rx FIFO size %d\n", + dev->ndev->name, tx_size); + } + + switch(rx_size) { + case 16384: + ret |= EMAC4_MR1_RFS_16K; + break; + case 4096: + ret |= EMAC4_MR1_RFS_4K; + break; + case 2048: + ret |= EMAC4_MR1_RFS_2K; + break; + default: + printk(KERN_WARNING "%s: Unknown Rx FIFO size %d\n", + dev->ndev->name, rx_size); + } + + return ret; +} + +static u32 emac_calc_base_mr1(struct emac_instance *dev, int tx_size, int rx_size) +{ + return emac_has_feature(dev, EMAC_FTR_EMAC4) ? + __emac4_calc_base_mr1(dev, tx_size, rx_size) : + __emac_calc_base_mr1(dev, tx_size, rx_size); +} + +static inline u32 emac_calc_trtr(struct emac_instance *dev, unsigned int size) +{ + if (emac_has_feature(dev, EMAC_FTR_EMAC4)) + return ((size >> 6) - 1) << EMAC_TRTR_SHIFT_EMAC4; + else + return ((size >> 6) - 1) << EMAC_TRTR_SHIFT; +} + +static inline u32 emac_calc_rwmr(struct emac_instance *dev, + unsigned int low, unsigned int high) +{ + if (emac_has_feature(dev, EMAC_FTR_EMAC4)) + return (low << 22) | ( (high & 0x3ff) << 6); + else + return (low << 23) | ( (high & 0x1ff) << 7); +} + +static int emac_configure(struct emac_instance *dev) +{ + struct emac_regs __iomem *p = dev->emacp; + struct net_device *ndev = dev->ndev; + int tx_size, rx_size; + u32 r, mr1 = 0; + + DBG(dev, "configure" NL); + + if (emac_reset(dev) < 0) + return -ETIMEDOUT; + + if (emac_has_feature(dev, EMAC_FTR_HAS_TAH)) + tah_reset(dev->tah_dev); + + DBG(dev, " duplex = %d, pause = %d, asym_pause = %d\n", + dev->phy.duplex, dev->phy.pause, dev->phy.asym_pause); + + /* Default fifo sizes */ + tx_size = dev->tx_fifo_size; + rx_size = dev->rx_fifo_size; + + /* Check for full duplex */ + if (dev->phy.duplex == DUPLEX_FULL) + mr1 |= EMAC_MR1_FDE | EMAC_MR1_MWSW_001; + + /* Adjust fifo sizes, mr1 and timeouts based on link speed */ + dev->stop_timeout = STOP_TIMEOUT_10; + switch (dev->phy.speed) { + case SPEED_1000: + if (emac_phy_gpcs(dev->phy.mode)) { + mr1 |= EMAC_MR1_MF_1000GPCS | + EMAC_MR1_MF_IPPA(dev->phy.address); + + /* Put some arbitrary OUI, Manuf & Rev IDs so we can + * identify this GPCS PHY later. + */ + out_be32(&p->ipcr, 0xdeadbeef); + } else + mr1 |= EMAC_MR1_MF_1000; + + /* Extended fifo sizes */ + tx_size = dev->tx_fifo_size_gige; + rx_size = dev->rx_fifo_size_gige; + + if (dev->ndev->mtu > ETH_DATA_LEN) { + mr1 |= EMAC_MR1_JPSM; + dev->stop_timeout = STOP_TIMEOUT_1000_JUMBO; + } else + dev->stop_timeout = STOP_TIMEOUT_1000; + break; + case SPEED_100: + mr1 |= EMAC_MR1_MF_100; + dev->stop_timeout = STOP_TIMEOUT_100; + break; + default: /* make gcc happy */ + break; + } + + if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) + rgmii_set_speed(dev->rgmii_dev, dev->rgmii_port, + dev->phy.speed); + if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII)) + zmii_set_speed(dev->zmii_dev, dev->zmii_port, dev->phy.speed); + + /* on 40x erratum forces us to NOT use integrated flow control, + * let's hope it works on 44x ;) + */ + if (!emac_has_feature(dev, EMAC_FTR_NO_FLOW_CONTROL_40x) && + dev->phy.duplex == DUPLEX_FULL) { + if (dev->phy.pause) + mr1 |= EMAC_MR1_EIFC | EMAC_MR1_APP; + else if (dev->phy.asym_pause) + mr1 |= EMAC_MR1_APP; + } + + /* Add base settings & fifo sizes & program MR1 */ + mr1 |= emac_calc_base_mr1(dev, tx_size, rx_size); + out_be32(&p->mr1, mr1); + + /* Set individual MAC address */ + out_be32(&p->iahr, (ndev->dev_addr[0] << 8) | ndev->dev_addr[1]); + out_be32(&p->ialr, (ndev->dev_addr[2] << 24) | + (ndev->dev_addr[3] << 16) | (ndev->dev_addr[4] << 8) | + ndev->dev_addr[5]); + + /* VLAN Tag Protocol ID */ + out_be32(&p->vtpid, 0x8100); + + /* Receive mode register */ + r = emac_iff2rmr(ndev); + if (r & EMAC_RMR_MAE) + emac_hash_mc(dev); + out_be32(&p->rmr, r); + + /* FIFOs thresholds */ + if (emac_has_feature(dev, EMAC_FTR_EMAC4)) + r = EMAC4_TMR1((dev->mal_burst_size / dev->fifo_entry_size) + 1, + tx_size / 2 / dev->fifo_entry_size); + else + r = EMAC_TMR1((dev->mal_burst_size / dev->fifo_entry_size) + 1, + tx_size / 2 / dev->fifo_entry_size); + out_be32(&p->tmr1, r); + out_be32(&p->trtr, emac_calc_trtr(dev, tx_size / 2)); + + /* PAUSE frame is sent when RX FIFO reaches its high-water mark, + there should be still enough space in FIFO to allow the our link + partner time to process this frame and also time to send PAUSE + frame itself. + + Here is the worst case scenario for the RX FIFO "headroom" + (from "The Switch Book") (100Mbps, without preamble, inter-frame gap): + + 1) One maximum-length frame on TX 1522 bytes + 2) One PAUSE frame time 64 bytes + 3) PAUSE frame decode time allowance 64 bytes + 4) One maximum-length frame on RX 1522 bytes + 5) Round-trip propagation delay of the link (100Mb) 15 bytes + ---------- + 3187 bytes + + I chose to set high-water mark to RX_FIFO_SIZE / 4 (1024 bytes) + low-water mark to RX_FIFO_SIZE / 8 (512 bytes) + */ + r = emac_calc_rwmr(dev, rx_size / 8 / dev->fifo_entry_size, + rx_size / 4 / dev->fifo_entry_size); + out_be32(&p->rwmr, r); + + /* Set PAUSE timer to the maximum */ + out_be32(&p->ptr, 0xffff); + + /* IRQ sources */ + r = EMAC_ISR_OVR | EMAC_ISR_BP | EMAC_ISR_SE | + EMAC_ISR_ALE | EMAC_ISR_BFCS | EMAC_ISR_PTLE | EMAC_ISR_ORE | + EMAC_ISR_IRE | EMAC_ISR_TE; + if (emac_has_feature(dev, EMAC_FTR_EMAC4)) + r |= EMAC4_ISR_TXPE | EMAC4_ISR_RXPE /* | EMAC4_ISR_TXUE | + EMAC4_ISR_RXOE | */; + out_be32(&p->iser, r); + + /* We need to take GPCS PHY out of isolate mode after EMAC reset */ + if (emac_phy_gpcs(dev->phy.mode)) + emac_mii_reset_phy(&dev->phy); + + return 0; +} + +static void emac_reinitialize(struct emac_instance *dev) +{ + DBG(dev, "reinitialize" NL); + + emac_netif_stop(dev); + if (!emac_configure(dev)) { + emac_tx_enable(dev); + emac_rx_enable(dev); + } + emac_netif_start(dev); +} + +static void emac_full_tx_reset(struct emac_instance *dev) +{ + DBG(dev, "full_tx_reset" NL); + + emac_tx_disable(dev); + mal_disable_tx_channel(dev->mal, dev->mal_tx_chan); + emac_clean_tx_ring(dev); + dev->tx_cnt = dev->tx_slot = dev->ack_slot = 0; + + emac_configure(dev); + + mal_enable_tx_channel(dev->mal, dev->mal_tx_chan); + emac_tx_enable(dev); + emac_rx_enable(dev); +} + +static void emac_reset_work(struct work_struct *work) +{ + struct emac_instance *dev = container_of(work, struct emac_instance, reset_work); + + DBG(dev, "reset_work" NL); + + mutex_lock(&dev->link_lock); + emac_netif_stop(dev); + emac_full_tx_reset(dev); + emac_netif_start(dev); + mutex_unlock(&dev->link_lock); +} + +static void emac_tx_timeout(struct net_device *ndev) +{ + struct emac_instance *dev = netdev_priv(ndev); + + DBG(dev, "tx_timeout" NL); + + schedule_work(&dev->reset_work); +} + + +static inline int emac_phy_done(struct emac_instance *dev, u32 stacr) +{ + int done = !!(stacr & EMAC_STACR_OC); + + if (emac_has_feature(dev, EMAC_FTR_STACR_OC_INVERT)) + done = !done; + + return done; +}; + +static int __emac_mdio_read(struct emac_instance *dev, u8 id, u8 reg) +{ + struct emac_regs __iomem *p = dev->emacp; + u32 r = 0; + int n, err = -ETIMEDOUT; + + mutex_lock(&dev->mdio_lock); + + DBG2(dev, "mdio_read(%02x,%02x)" NL, id, reg); + + /* Enable proper MDIO port */ + if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII)) + zmii_get_mdio(dev->zmii_dev, dev->zmii_port); + if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) + rgmii_get_mdio(dev->rgmii_dev, dev->rgmii_port); + + /* Wait for management interface to become idle */ + n = 10; + while (!emac_phy_done(dev, in_be32(&p->stacr))) { + udelay(1); + if (!--n) { + DBG2(dev, " -> timeout wait idle\n"); + goto bail; + } + } + + /* Issue read command */ + if (emac_has_feature(dev, EMAC_FTR_EMAC4)) + r = EMAC4_STACR_BASE(dev->opb_bus_freq); + else + r = EMAC_STACR_BASE(dev->opb_bus_freq); + if (emac_has_feature(dev, EMAC_FTR_STACR_OC_INVERT)) + r |= EMAC_STACR_OC; + if (emac_has_feature(dev, EMAC_FTR_HAS_AXON_STACR)) + r |= EMACX_STACR_STAC_READ; + else + r |= EMAC_STACR_STAC_READ; + r |= (reg & EMAC_STACR_PRA_MASK) + | ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT); + out_be32(&p->stacr, r); + + /* Wait for read to complete */ + n = 100; + while (!emac_phy_done(dev, (r = in_be32(&p->stacr)))) { + udelay(1); + if (!--n) { + DBG2(dev, " -> timeout wait complete\n"); + goto bail; + } + } + + if (unlikely(r & EMAC_STACR_PHYE)) { + DBG(dev, "mdio_read(%02x, %02x) failed" NL, id, reg); + err = -EREMOTEIO; + goto bail; + } + + r = ((r >> EMAC_STACR_PHYD_SHIFT) & EMAC_STACR_PHYD_MASK); + + DBG2(dev, "mdio_read -> %04x" NL, r); + err = 0; + bail: + if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) + rgmii_put_mdio(dev->rgmii_dev, dev->rgmii_port); + if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII)) + zmii_put_mdio(dev->zmii_dev, dev->zmii_port); + mutex_unlock(&dev->mdio_lock); + + return err == 0 ? r : err; +} + +static void __emac_mdio_write(struct emac_instance *dev, u8 id, u8 reg, + u16 val) +{ + struct emac_regs __iomem *p = dev->emacp; + u32 r = 0; + int n, err = -ETIMEDOUT; + + mutex_lock(&dev->mdio_lock); + + DBG2(dev, "mdio_write(%02x,%02x,%04x)" NL, id, reg, val); + + /* Enable proper MDIO port */ + if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII)) + zmii_get_mdio(dev->zmii_dev, dev->zmii_port); + if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) + rgmii_get_mdio(dev->rgmii_dev, dev->rgmii_port); + + /* Wait for management interface to be idle */ + n = 10; + while (!emac_phy_done(dev, in_be32(&p->stacr))) { + udelay(1); + if (!--n) { + DBG2(dev, " -> timeout wait idle\n"); + goto bail; + } + } + + /* Issue write command */ + if (emac_has_feature(dev, EMAC_FTR_EMAC4)) + r = EMAC4_STACR_BASE(dev->opb_bus_freq); + else + r = EMAC_STACR_BASE(dev->opb_bus_freq); + if (emac_has_feature(dev, EMAC_FTR_STACR_OC_INVERT)) + r |= EMAC_STACR_OC; + if (emac_has_feature(dev, EMAC_FTR_HAS_AXON_STACR)) + r |= EMACX_STACR_STAC_WRITE; + else + r |= EMAC_STACR_STAC_WRITE; + r |= (reg & EMAC_STACR_PRA_MASK) | + ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT) | + (val << EMAC_STACR_PHYD_SHIFT); + out_be32(&p->stacr, r); + + /* Wait for write to complete */ + n = 100; + while (!emac_phy_done(dev, in_be32(&p->stacr))) { + udelay(1); + if (!--n) { + DBG2(dev, " -> timeout wait complete\n"); + goto bail; + } + } + err = 0; + bail: + if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) + rgmii_put_mdio(dev->rgmii_dev, dev->rgmii_port); + if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII)) + zmii_put_mdio(dev->zmii_dev, dev->zmii_port); + mutex_unlock(&dev->mdio_lock); +} + +static int emac_mdio_read(struct net_device *ndev, int id, int reg) +{ + struct emac_instance *dev = netdev_priv(ndev); + int res; + + res = __emac_mdio_read(dev->mdio_instance ? dev->mdio_instance : dev, + (u8) id, (u8) reg); + return res; +} + +static void emac_mdio_write(struct net_device *ndev, int id, int reg, int val) +{ + struct emac_instance *dev = netdev_priv(ndev); + + __emac_mdio_write(dev->mdio_instance ? dev->mdio_instance : dev, + (u8) id, (u8) reg, (u16) val); +} + +/* Tx lock BH */ +static void __emac_set_multicast_list(struct emac_instance *dev) +{ + struct emac_regs __iomem *p = dev->emacp; + u32 rmr = emac_iff2rmr(dev->ndev); + + DBG(dev, "__multicast %08x" NL, rmr); + + /* I decided to relax register access rules here to avoid + * full EMAC reset. + * + * There is a real problem with EMAC4 core if we use MWSW_001 bit + * in MR1 register and do a full EMAC reset. + * One TX BD status update is delayed and, after EMAC reset, it + * never happens, resulting in TX hung (it'll be recovered by TX + * timeout handler eventually, but this is just gross). + * So we either have to do full TX reset or try to cheat here :) + * + * The only required change is to RX mode register, so I *think* all + * we need is just to stop RX channel. This seems to work on all + * tested SoCs. --ebs + * + * If we need the full reset, we might just trigger the workqueue + * and do it async... a bit nasty but should work --BenH + */ + dev->mcast_pending = 0; + emac_rx_disable(dev); + if (rmr & EMAC_RMR_MAE) + emac_hash_mc(dev); + out_be32(&p->rmr, rmr); + emac_rx_enable(dev); +} + +/* Tx lock BH */ +static void emac_set_multicast_list(struct net_device *ndev) +{ + struct emac_instance *dev = netdev_priv(ndev); + + DBG(dev, "multicast" NL); + + BUG_ON(!netif_running(dev->ndev)); + + if (dev->no_mcast) { + dev->mcast_pending = 1; + return; + } + __emac_set_multicast_list(dev); +} + +static int emac_resize_rx_ring(struct emac_instance *dev, int new_mtu) +{ + int rx_sync_size = emac_rx_sync_size(new_mtu); + int rx_skb_size = emac_rx_skb_size(new_mtu); + int i, ret = 0; + + mutex_lock(&dev->link_lock); + emac_netif_stop(dev); + emac_rx_disable(dev); + mal_disable_rx_channel(dev->mal, dev->mal_rx_chan); + + if (dev->rx_sg_skb) { + ++dev->estats.rx_dropped_resize; + dev_kfree_skb(dev->rx_sg_skb); + dev->rx_sg_skb = NULL; + } + + /* Make a first pass over RX ring and mark BDs ready, dropping + * non-processed packets on the way. We need this as a separate pass + * to simplify error recovery in the case of allocation failure later. + */ + for (i = 0; i < NUM_RX_BUFF; ++i) { + if (dev->rx_desc[i].ctrl & MAL_RX_CTRL_FIRST) + ++dev->estats.rx_dropped_resize; + + dev->rx_desc[i].data_len = 0; + dev->rx_desc[i].ctrl = MAL_RX_CTRL_EMPTY | + (i == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0); + } + + /* Reallocate RX ring only if bigger skb buffers are required */ + if (rx_skb_size <= dev->rx_skb_size) + goto skip; + + /* Second pass, allocate new skbs */ + for (i = 0; i < NUM_RX_BUFF; ++i) { + struct sk_buff *skb = alloc_skb(rx_skb_size, GFP_ATOMIC); + if (!skb) { + ret = -ENOMEM; + goto oom; + } + + BUG_ON(!dev->rx_skb[i]); + dev_kfree_skb(dev->rx_skb[i]); + + skb_reserve(skb, EMAC_RX_SKB_HEADROOM + 2); + dev->rx_desc[i].data_ptr = + dma_map_single(&dev->ofdev->dev, skb->data - 2, rx_sync_size, + DMA_FROM_DEVICE) + 2; + dev->rx_skb[i] = skb; + } + skip: + /* Check if we need to change "Jumbo" bit in MR1 */ + if ((new_mtu > ETH_DATA_LEN) ^ (dev->ndev->mtu > ETH_DATA_LEN)) { + /* This is to prevent starting RX channel in emac_rx_enable() */ + set_bit(MAL_COMMAC_RX_STOPPED, &dev->commac.flags); + + dev->ndev->mtu = new_mtu; + emac_full_tx_reset(dev); + } + + mal_set_rcbs(dev->mal, dev->mal_rx_chan, emac_rx_size(new_mtu)); + oom: + /* Restart RX */ + clear_bit(MAL_COMMAC_RX_STOPPED, &dev->commac.flags); + dev->rx_slot = 0; + mal_enable_rx_channel(dev->mal, dev->mal_rx_chan); + emac_rx_enable(dev); + emac_netif_start(dev); + mutex_unlock(&dev->link_lock); + + return ret; +} + +/* Process ctx, rtnl_lock semaphore */ +static int emac_change_mtu(struct net_device *ndev, int new_mtu) +{ + struct emac_instance *dev = netdev_priv(ndev); + int ret = 0; + + if (new_mtu < EMAC_MIN_MTU || new_mtu > dev->max_mtu) + return -EINVAL; + + DBG(dev, "change_mtu(%d)" NL, new_mtu); + + if (netif_running(ndev)) { + /* Check if we really need to reinitalize RX ring */ + if (emac_rx_skb_size(ndev->mtu) != emac_rx_skb_size(new_mtu)) + ret = emac_resize_rx_ring(dev, new_mtu); + } + + if (!ret) { + ndev->mtu = new_mtu; + dev->rx_skb_size = emac_rx_skb_size(new_mtu); + dev->rx_sync_size = emac_rx_sync_size(new_mtu); + } + + return ret; +} + +static void emac_clean_tx_ring(struct emac_instance *dev) +{ + int i; + + for (i = 0; i < NUM_TX_BUFF; ++i) { + if (dev->tx_skb[i]) { + dev_kfree_skb(dev->tx_skb[i]); + dev->tx_skb[i] = NULL; + if (dev->tx_desc[i].ctrl & MAL_TX_CTRL_READY) + ++dev->estats.tx_dropped; + } + dev->tx_desc[i].ctrl = 0; + dev->tx_desc[i].data_ptr = 0; + } +} + +static void emac_clean_rx_ring(struct emac_instance *dev) +{ + int i; + + for (i = 0; i < NUM_RX_BUFF; ++i) + if (dev->rx_skb[i]) { + dev->rx_desc[i].ctrl = 0; + dev_kfree_skb(dev->rx_skb[i]); + dev->rx_skb[i] = NULL; + dev->rx_desc[i].data_ptr = 0; + } + + if (dev->rx_sg_skb) { + dev_kfree_skb(dev->rx_sg_skb); + dev->rx_sg_skb = NULL; + } +} + +static inline int emac_alloc_rx_skb(struct emac_instance *dev, int slot, + gfp_t flags) +{ + struct sk_buff *skb = alloc_skb(dev->rx_skb_size, flags); + if (unlikely(!skb)) + return -ENOMEM; + + dev->rx_skb[slot] = skb; + dev->rx_desc[slot].data_len = 0; + + skb_reserve(skb, EMAC_RX_SKB_HEADROOM + 2); + dev->rx_desc[slot].data_ptr = + dma_map_single(&dev->ofdev->dev, skb->data - 2, dev->rx_sync_size, + DMA_FROM_DEVICE) + 2; + wmb(); + dev->rx_desc[slot].ctrl = MAL_RX_CTRL_EMPTY | + (slot == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0); + + return 0; +} + +static void emac_print_link_status(struct emac_instance *dev) +{ + if (netif_carrier_ok(dev->ndev)) + printk(KERN_INFO "%s: link is up, %d %s%s\n", + dev->ndev->name, dev->phy.speed, + dev->phy.duplex == DUPLEX_FULL ? "FDX" : "HDX", + dev->phy.pause ? ", pause enabled" : + dev->phy.asym_pause ? ", asymmetric pause enabled" : ""); + else + printk(KERN_INFO "%s: link is down\n", dev->ndev->name); +} + +/* Process ctx, rtnl_lock semaphore */ +static int emac_open(struct net_device *ndev) +{ + struct emac_instance *dev = netdev_priv(ndev); + int err, i; + + DBG(dev, "open" NL); + + /* Setup error IRQ handler */ + err = request_irq(dev->emac_irq, emac_irq, 0, "EMAC", dev); + if (err) { + printk(KERN_ERR "%s: failed to request IRQ %d\n", + ndev->name, dev->emac_irq); + return err; + } + + /* Allocate RX ring */ + for (i = 0; i < NUM_RX_BUFF; ++i) + if (emac_alloc_rx_skb(dev, i, GFP_KERNEL)) { + printk(KERN_ERR "%s: failed to allocate RX ring\n", + ndev->name); + goto oom; + } + + dev->tx_cnt = dev->tx_slot = dev->ack_slot = dev->rx_slot = 0; + clear_bit(MAL_COMMAC_RX_STOPPED, &dev->commac.flags); + dev->rx_sg_skb = NULL; + + mutex_lock(&dev->link_lock); + + /* XXX Start PHY polling now. Shouldn't wr do like sungem instead and + * always poll the PHY even when the iface is down ? That would allow + * things like laptop-net to work. --BenH + */ + if (dev->phy.address >= 0) { + int link_poll_interval; + if (dev->phy.def->ops->poll_link(&dev->phy)) { + dev->phy.def->ops->read_link(&dev->phy); + netif_carrier_on(dev->ndev); + link_poll_interval = PHY_POLL_LINK_ON; + } else { + netif_carrier_off(dev->ndev); + link_poll_interval = PHY_POLL_LINK_OFF; + } + dev->link_polling = 1; + wmb(); + schedule_delayed_work(&dev->link_work, link_poll_interval); + emac_print_link_status(dev); + } else + netif_carrier_on(dev->ndev); + + emac_configure(dev); + mal_poll_add(dev->mal, &dev->commac); + mal_enable_tx_channel(dev->mal, dev->mal_tx_chan); + mal_set_rcbs(dev->mal, dev->mal_rx_chan, emac_rx_size(ndev->mtu)); + mal_enable_rx_channel(dev->mal, dev->mal_rx_chan); + emac_tx_enable(dev); + emac_rx_enable(dev); + emac_netif_start(dev); + + mutex_unlock(&dev->link_lock); + + return 0; + oom: + emac_clean_rx_ring(dev); + free_irq(dev->emac_irq, dev); + + return -ENOMEM; +} + +/* BHs disabled */ +#if 0 +static int emac_link_differs(struct emac_instance *dev) +{ + u32 r = in_be32(&dev->emacp->mr1); + + int duplex = r & EMAC_MR1_FDE ? DUPLEX_FULL : DUPLEX_HALF; + int speed, pause, asym_pause; + + if (r & EMAC_MR1_MF_1000) + speed = SPEED_1000; + else if (r & EMAC_MR1_MF_100) + speed = SPEED_100; + else + speed = SPEED_10; + + switch (r & (EMAC_MR1_EIFC | EMAC_MR1_APP)) { + case (EMAC_MR1_EIFC | EMAC_MR1_APP): + pause = 1; + asym_pause = 0; + break; + case EMAC_MR1_APP: + pause = 0; + asym_pause = 1; + break; + default: + pause = asym_pause = 0; + } + return speed != dev->phy.speed || duplex != dev->phy.duplex || + pause != dev->phy.pause || asym_pause != dev->phy.asym_pause; +} +#endif + +static void emac_link_timer(struct work_struct *work) +{ + struct emac_instance *dev = + container_of((struct delayed_work *)work, + struct emac_instance, link_work); + int link_poll_interval; + + mutex_lock(&dev->link_lock); + + DBG2(dev, "link timer" NL); + + if (dev->phy.def->ops->poll_link(&dev->phy)) { + if (!netif_carrier_ok(dev->ndev)) { + /* Get new link parameters */ + dev->phy.def->ops->read_link(&dev->phy); + + netif_carrier_on(dev->ndev); + emac_netif_stop(dev); + emac_full_tx_reset(dev); + emac_netif_start(dev); + emac_print_link_status(dev); + } + link_poll_interval = PHY_POLL_LINK_ON; + } else { + if (netif_carrier_ok(dev->ndev)) { + emac_reinitialize(dev); + netif_carrier_off(dev->ndev); + netif_tx_disable(dev->ndev); + emac_print_link_status(dev); + } + link_poll_interval = PHY_POLL_LINK_OFF; + } + schedule_delayed_work(&dev->link_work, link_poll_interval); + + mutex_unlock(&dev->link_lock); +} + +static void emac_force_link_update(struct emac_instance *dev) +{ + netif_carrier_off(dev->ndev); + if (dev->link_polling) { + cancel_rearming_delayed_work(&dev->link_work); + if (dev->link_polling) + schedule_delayed_work(&dev->link_work, PHY_POLL_LINK_OFF); + } +} + +/* Process ctx, rtnl_lock semaphore */ +static int emac_close(struct net_device *ndev) +{ + struct emac_instance *dev = netdev_priv(ndev); + + DBG(dev, "close" NL); + + if (dev->phy.address >= 0) + cancel_rearming_delayed_work(&dev->link_work); + + emac_netif_stop(dev); + flush_scheduled_work(); + + emac_rx_disable(dev); + emac_tx_disable(dev); + mal_disable_rx_channel(dev->mal, dev->mal_rx_chan); + mal_disable_tx_channel(dev->mal, dev->mal_tx_chan); + mal_poll_del(dev->mal, &dev->commac); + + emac_clean_tx_ring(dev); + emac_clean_rx_ring(dev); + + free_irq(dev->emac_irq, dev); + + return 0; +} + +static inline u16 emac_tx_csum(struct emac_instance *dev, + struct sk_buff *skb) +{ + if (emac_has_feature(dev, EMAC_FTR_HAS_TAH && + skb->ip_summed == CHECKSUM_PARTIAL)) { + ++dev->stats.tx_packets_csum; + return EMAC_TX_CTRL_TAH_CSUM; + } + return 0; +} + +static inline int emac_xmit_finish(struct emac_instance *dev, int len) +{ + struct emac_regs __iomem *p = dev->emacp; + struct net_device *ndev = dev->ndev; + + /* Send the packet out. If the if makes a significant perf + * difference, then we can store the TMR0 value in "dev" + * instead + */ + if (emac_has_feature(dev, EMAC_FTR_EMAC4)) + out_be32(&p->tmr0, EMAC_TMR0_XMIT); + else + out_be32(&p->tmr0, EMAC4_TMR0_XMIT); + + if (unlikely(++dev->tx_cnt == NUM_TX_BUFF)) { + netif_stop_queue(ndev); + DBG2(dev, "stopped TX queue" NL); + } + + ndev->trans_start = jiffies; + ++dev->stats.tx_packets; + dev->stats.tx_bytes += len; + + return 0; +} + +/* Tx lock BH */ +static int emac_start_xmit(struct sk_buff *skb, struct net_device *ndev) +{ + struct emac_instance *dev = netdev_priv(ndev); + unsigned int len = skb->len; + int slot; + + u16 ctrl = EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP | MAL_TX_CTRL_READY | + MAL_TX_CTRL_LAST | emac_tx_csum(dev, skb); + + slot = dev->tx_slot++; + if (dev->tx_slot == NUM_TX_BUFF) { + dev->tx_slot = 0; + ctrl |= MAL_TX_CTRL_WRAP; + } + + DBG2(dev, "xmit(%u) %d" NL, len, slot); + + dev->tx_skb[slot] = skb; + dev->tx_desc[slot].data_ptr = dma_map_single(&dev->ofdev->dev, + skb->data, len, + DMA_TO_DEVICE); + dev->tx_desc[slot].data_len = (u16) len; + wmb(); + dev->tx_desc[slot].ctrl = ctrl; + + return emac_xmit_finish(dev, len); +} + +#ifdef CONFIG_IBM_NEW_EMAC_TAH +static inline int emac_xmit_split(struct emac_instance *dev, int slot, + u32 pd, int len, int last, u16 base_ctrl) +{ + while (1) { + u16 ctrl = base_ctrl; + int chunk = min(len, MAL_MAX_TX_SIZE); + len -= chunk; + + slot = (slot + 1) % NUM_TX_BUFF; + + if (last && !len) + ctrl |= MAL_TX_CTRL_LAST; + if (slot == NUM_TX_BUFF - 1) + ctrl |= MAL_TX_CTRL_WRAP; + + dev->tx_skb[slot] = NULL; + dev->tx_desc[slot].data_ptr = pd; + dev->tx_desc[slot].data_len = (u16) chunk; + dev->tx_desc[slot].ctrl = ctrl; + ++dev->tx_cnt; + + if (!len) + break; + + pd += chunk; + } + return slot; +} + +/* Tx lock BH disabled (SG version for TAH equipped EMACs) */ +static int emac_start_xmit_sg(struct sk_buff *skb, struct net_device *ndev) +{ + struct emac_instance *dev = netdev_priv(ndev); + int nr_frags = skb_shinfo(skb)->nr_frags; + int len = skb->len, chunk; + int slot, i; + u16 ctrl; + u32 pd; + + /* This is common "fast" path */ + if (likely(!nr_frags && len <= MAL_MAX_TX_SIZE)) + return emac_start_xmit(skb, ndev); + + len -= skb->data_len; + + /* Note, this is only an *estimation*, we can still run out of empty + * slots because of the additional fragmentation into + * MAL_MAX_TX_SIZE-sized chunks + */ + if (unlikely(dev->tx_cnt + nr_frags + mal_tx_chunks(len) > NUM_TX_BUFF)) + goto stop_queue; + + ctrl = EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP | MAL_TX_CTRL_READY | + emac_tx_csum(dev, skb); + slot = dev->tx_slot; + + /* skb data */ + dev->tx_skb[slot] = NULL; + chunk = min(len, MAL_MAX_TX_SIZE); + dev->tx_desc[slot].data_ptr = pd = + dma_map_single(&dev->ofdev->dev, skb->data, len, DMA_TO_DEVICE); + dev->tx_desc[slot].data_len = (u16) chunk; + len -= chunk; + if (unlikely(len)) + slot = emac_xmit_split(dev, slot, pd + chunk, len, !nr_frags, + ctrl); + /* skb fragments */ + for (i = 0; i < nr_frags; ++i) { + struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i]; + len = frag->size; + + if (unlikely(dev->tx_cnt + mal_tx_chunks(len) >= NUM_TX_BUFF)) + goto undo_frame; + + pd = dma_map_page(&dev->ofdev->dev, frag->page, frag->page_offset, len, + DMA_TO_DEVICE); + + slot = emac_xmit_split(dev, slot, pd, len, i == nr_frags - 1, + ctrl); + } + + DBG2(dev, "xmit_sg(%u) %d - %d" NL, skb->len, dev->tx_slot, slot); + + /* Attach skb to the last slot so we don't release it too early */ + dev->tx_skb[slot] = skb; + + /* Send the packet out */ + if (dev->tx_slot == NUM_TX_BUFF - 1) + ctrl |= MAL_TX_CTRL_WRAP; + wmb(); + dev->tx_desc[dev->tx_slot].ctrl = ctrl; + dev->tx_slot = (slot + 1) % NUM_TX_BUFF; + + return emac_xmit_finish(dev, skb->len); + + undo_frame: + /* Well, too bad. Our previous estimation was overly optimistic. + * Undo everything. + */ + while (slot != dev->tx_slot) { + dev->tx_desc[slot].ctrl = 0; + --dev->tx_cnt; + if (--slot < 0) + slot = NUM_TX_BUFF - 1; + } + ++dev->estats.tx_undo; + + stop_queue: + netif_stop_queue(ndev); + DBG2(dev, "stopped TX queue" NL); + return 1; +} +#else +# define emac_start_xmit_sg emac_start_xmit +#endif /* !defined(CONFIG_IBM_NEW_EMAC_TAH) */ + +/* Tx lock BHs */ +static void emac_parse_tx_error(struct emac_instance *dev, u16 ctrl) +{ + struct emac_error_stats *st = &dev->estats; + + DBG(dev, "BD TX error %04x" NL, ctrl); + + ++st->tx_bd_errors; + if (ctrl & EMAC_TX_ST_BFCS) + ++st->tx_bd_bad_fcs; + if (ctrl & EMAC_TX_ST_LCS) + ++st->tx_bd_carrier_loss; + if (ctrl & EMAC_TX_ST_ED) + ++st->tx_bd_excessive_deferral; + if (ctrl & EMAC_TX_ST_EC) + ++st->tx_bd_excessive_collisions; + if (ctrl & EMAC_TX_ST_LC) + ++st->tx_bd_late_collision; + if (ctrl & EMAC_TX_ST_MC) + ++st->tx_bd_multple_collisions; + if (ctrl & EMAC_TX_ST_SC) + ++st->tx_bd_single_collision; + if (ctrl & EMAC_TX_ST_UR) + ++st->tx_bd_underrun; + if (ctrl & EMAC_TX_ST_SQE) + ++st->tx_bd_sqe; +} + +static void emac_poll_tx(void *param) +{ + struct emac_instance *dev = param; + u32 bad_mask; + + DBG2(dev, "poll_tx, %d %d" NL, dev->tx_cnt, dev->ack_slot); + + if (emac_has_feature(dev, EMAC_FTR_HAS_TAH)) + bad_mask = EMAC_IS_BAD_TX_TAH; + else + bad_mask = EMAC_IS_BAD_TX; + + netif_tx_lock_bh(dev->ndev); + if (dev->tx_cnt) { + u16 ctrl; + int slot = dev->ack_slot, n = 0; + again: + ctrl = dev->tx_desc[slot].ctrl; + if (!(ctrl & MAL_TX_CTRL_READY)) { + struct sk_buff *skb = dev->tx_skb[slot]; + ++n; + + if (skb) { + dev_kfree_skb(skb); + dev->tx_skb[slot] = NULL; + } + slot = (slot + 1) % NUM_TX_BUFF; + + if (unlikely(ctrl & bad_mask)) + emac_parse_tx_error(dev, ctrl); + + if (--dev->tx_cnt) + goto again; + } + if (n) { + dev->ack_slot = slot; + if (netif_queue_stopped(dev->ndev) && + dev->tx_cnt < EMAC_TX_WAKEUP_THRESH) + netif_wake_queue(dev->ndev); + + DBG2(dev, "tx %d pkts" NL, n); + } + } + netif_tx_unlock_bh(dev->ndev); +} + +static inline void emac_recycle_rx_skb(struct emac_instance *dev, int slot, + int len) +{ + struct sk_buff *skb = dev->rx_skb[slot]; + + DBG2(dev, "recycle %d %d" NL, slot, len); + + if (len) + dma_map_single(&dev->ofdev->dev, skb->data - 2, + EMAC_DMA_ALIGN(len + 2), DMA_FROM_DEVICE); + + dev->rx_desc[slot].data_len = 0; + wmb(); + dev->rx_desc[slot].ctrl = MAL_RX_CTRL_EMPTY | + (slot == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0); +} + +static void emac_parse_rx_error(struct emac_instance *dev, u16 ctrl) +{ + struct emac_error_stats *st = &dev->estats; + + DBG(dev, "BD RX error %04x" NL, ctrl); + + ++st->rx_bd_errors; + if (ctrl & EMAC_RX_ST_OE) + ++st->rx_bd_overrun; + if (ctrl & EMAC_RX_ST_BP) + ++st->rx_bd_bad_packet; + if (ctrl & EMAC_RX_ST_RP) + ++st->rx_bd_runt_packet; + if (ctrl & EMAC_RX_ST_SE) + ++st->rx_bd_short_event; + if (ctrl & EMAC_RX_ST_AE) + ++st->rx_bd_alignment_error; + if (ctrl & EMAC_RX_ST_BFCS) + ++st->rx_bd_bad_fcs; + if (ctrl & EMAC_RX_ST_PTL) + ++st->rx_bd_packet_too_long; + if (ctrl & EMAC_RX_ST_ORE) + ++st->rx_bd_out_of_range; + if (ctrl & EMAC_RX_ST_IRE) + ++st->rx_bd_in_range; +} + +static inline void emac_rx_csum(struct emac_instance *dev, + struct sk_buff *skb, u16 ctrl) +{ +#ifdef CONFIG_IBM_NEW_EMAC_TAH + if (!ctrl && dev->tah_dev) { + skb->ip_summed = CHECKSUM_UNNECESSARY; + ++dev->stats.rx_packets_csum; + } +#endif +} + +static inline int emac_rx_sg_append(struct emac_instance *dev, int slot) +{ + if (likely(dev->rx_sg_skb != NULL)) { + int len = dev->rx_desc[slot].data_len; + int tot_len = dev->rx_sg_skb->len + len; + + if (unlikely(tot_len + 2 > dev->rx_skb_size)) { + ++dev->estats.rx_dropped_mtu; + dev_kfree_skb(dev->rx_sg_skb); + dev->rx_sg_skb = NULL; + } else { + cacheable_memcpy(dev->rx_sg_skb->tail, + dev->rx_skb[slot]->data, len); + skb_put(dev->rx_sg_skb, len); + emac_recycle_rx_skb(dev, slot, len); + return 0; + } + } + emac_recycle_rx_skb(dev, slot, 0); + return -1; +} + +/* NAPI poll context */ +static int emac_poll_rx(void *param, int budget) +{ + struct emac_instance *dev = param; + int slot = dev->rx_slot, received = 0; + + DBG2(dev, "poll_rx(%d)" NL, budget); + + again: + while (budget > 0) { + int len; + struct sk_buff *skb; + u16 ctrl = dev->rx_desc[slot].ctrl; + + if (ctrl & MAL_RX_CTRL_EMPTY) + break; + + skb = dev->rx_skb[slot]; + mb(); + len = dev->rx_desc[slot].data_len; + + if (unlikely(!MAL_IS_SINGLE_RX(ctrl))) + goto sg; + + ctrl &= EMAC_BAD_RX_MASK; + if (unlikely(ctrl && ctrl != EMAC_RX_TAH_BAD_CSUM)) { + emac_parse_rx_error(dev, ctrl); + ++dev->estats.rx_dropped_error; + emac_recycle_rx_skb(dev, slot, 0); + len = 0; + goto next; + } + + if (len && len < EMAC_RX_COPY_THRESH) { + struct sk_buff *copy_skb = + alloc_skb(len + EMAC_RX_SKB_HEADROOM + 2, GFP_ATOMIC); + if (unlikely(!copy_skb)) + goto oom; + + skb_reserve(copy_skb, EMAC_RX_SKB_HEADROOM + 2); + cacheable_memcpy(copy_skb->data - 2, skb->data - 2, + len + 2); + emac_recycle_rx_skb(dev, slot, len); + skb = copy_skb; + } else if (unlikely(emac_alloc_rx_skb(dev, slot, GFP_ATOMIC))) + goto oom; + + skb_put(skb, len); + push_packet: + skb->dev = dev->ndev; + skb->protocol = eth_type_trans(skb, dev->ndev); + emac_rx_csum(dev, skb, ctrl); + + if (unlikely(netif_receive_skb(skb) == NET_RX_DROP)) + ++dev->estats.rx_dropped_stack; + next: + ++dev->stats.rx_packets; + skip: + dev->stats.rx_bytes += len; + slot = (slot + 1) % NUM_RX_BUFF; + --budget; + ++received; + continue; + sg: + if (ctrl & MAL_RX_CTRL_FIRST) { + BUG_ON(dev->rx_sg_skb); + if (unlikely(emac_alloc_rx_skb(dev, slot, GFP_ATOMIC))) { + DBG(dev, "rx OOM %d" NL, slot); + ++dev->estats.rx_dropped_oom; + emac_recycle_rx_skb(dev, slot, 0); + } else { + dev->rx_sg_skb = skb; + skb_put(skb, len); + } + } else if (!emac_rx_sg_append(dev, slot) && + (ctrl & MAL_RX_CTRL_LAST)) { + + skb = dev->rx_sg_skb; + dev->rx_sg_skb = NULL; + + ctrl &= EMAC_BAD_RX_MASK; + if (unlikely(ctrl && ctrl != EMAC_RX_TAH_BAD_CSUM)) { + emac_parse_rx_error(dev, ctrl); + ++dev->estats.rx_dropped_error; + dev_kfree_skb(skb); + len = 0; + } else + goto push_packet; + } + goto skip; + oom: + DBG(dev, "rx OOM %d" NL, slot); + /* Drop the packet and recycle skb */ + ++dev->estats.rx_dropped_oom; + emac_recycle_rx_skb(dev, slot, 0); + goto next; + } + + if (received) { + DBG2(dev, "rx %d BDs" NL, received); + dev->rx_slot = slot; + } + + if (unlikely(budget && test_bit(MAL_COMMAC_RX_STOPPED, &dev->commac.flags))) { + mb(); + if (!(dev->rx_desc[slot].ctrl & MAL_RX_CTRL_EMPTY)) { + DBG2(dev, "rx restart" NL); + received = 0; + goto again; + } + + if (dev->rx_sg_skb) { + DBG2(dev, "dropping partial rx packet" NL); + ++dev->estats.rx_dropped_error; + dev_kfree_skb(dev->rx_sg_skb); + dev->rx_sg_skb = NULL; + } + + clear_bit(MAL_COMMAC_RX_STOPPED, &dev->commac.flags); + mal_enable_rx_channel(dev->mal, dev->mal_rx_chan); + emac_rx_enable(dev); + dev->rx_slot = 0; + } + return received; +} + +/* NAPI poll context */ +static int emac_peek_rx(void *param) +{ + struct emac_instance *dev = param; + + return !(dev->rx_desc[dev->rx_slot].ctrl & MAL_RX_CTRL_EMPTY); +} + +/* NAPI poll context */ +static int emac_peek_rx_sg(void *param) +{ + struct emac_instance *dev = param; + + int slot = dev->rx_slot; + while (1) { + u16 ctrl = dev->rx_desc[slot].ctrl; + if (ctrl & MAL_RX_CTRL_EMPTY) + return 0; + else if (ctrl & MAL_RX_CTRL_LAST) + return 1; + + slot = (slot + 1) % NUM_RX_BUFF; + + /* I'm just being paranoid here :) */ + if (unlikely(slot == dev->rx_slot)) + return 0; + } +} + +/* Hard IRQ */ +static void emac_rxde(void *param) +{ + struct emac_instance *dev = param; + + ++dev->estats.rx_stopped; + emac_rx_disable_async(dev); +} + +/* Hard IRQ */ +static irqreturn_t emac_irq(int irq, void *dev_instance) +{ + struct emac_instance *dev = dev_instance; + struct emac_regs __iomem *p = dev->emacp; + struct emac_error_stats *st = &dev->estats; + u32 isr; + + spin_lock(&dev->lock); + + isr = in_be32(&p->isr); + out_be32(&p->isr, isr); + + DBG(dev, "isr = %08x" NL, isr); + + if (isr & EMAC4_ISR_TXPE) + ++st->tx_parity; + if (isr & EMAC4_ISR_RXPE) + ++st->rx_parity; + if (isr & EMAC4_ISR_TXUE) + ++st->tx_underrun; + if (isr & EMAC4_ISR_RXOE) + ++st->rx_fifo_overrun; + if (isr & EMAC_ISR_OVR) + ++st->rx_overrun; + if (isr & EMAC_ISR_BP) + ++st->rx_bad_packet; + if (isr & EMAC_ISR_RP) + ++st->rx_runt_packet; + if (isr & EMAC_ISR_SE) + ++st->rx_short_event; + if (isr & EMAC_ISR_ALE) + ++st->rx_alignment_error; + if (isr & EMAC_ISR_BFCS) + ++st->rx_bad_fcs; + if (isr & EMAC_ISR_PTLE) + ++st->rx_packet_too_long; + if (isr & EMAC_ISR_ORE) + ++st->rx_out_of_range; + if (isr & EMAC_ISR_IRE) + ++st->rx_in_range; + if (isr & EMAC_ISR_SQE) + ++st->tx_sqe; + if (isr & EMAC_ISR_TE) + ++st->tx_errors; + + spin_unlock(&dev->lock); + + return IRQ_HANDLED; +} + +static struct net_device_stats *emac_stats(struct net_device *ndev) +{ + struct emac_instance *dev = netdev_priv(ndev); + struct emac_stats *st = &dev->stats; + struct emac_error_stats *est = &dev->estats; + struct net_device_stats *nst = &dev->nstats; + unsigned long flags; + + DBG2(dev, "stats" NL); + + /* Compute "legacy" statistics */ + spin_lock_irqsave(&dev->lock, flags); + nst->rx_packets = (unsigned long)st->rx_packets; + nst->rx_bytes = (unsigned long)st->rx_bytes; + nst->tx_packets = (unsigned long)st->tx_packets; + nst->tx_bytes = (unsigned long)st->tx_bytes; + nst->rx_dropped = (unsigned long)(est->rx_dropped_oom + + est->rx_dropped_error + + est->rx_dropped_resize + + est->rx_dropped_mtu); + nst->tx_dropped = (unsigned long)est->tx_dropped; + + nst->rx_errors = (unsigned long)est->rx_bd_errors; + nst->rx_fifo_errors = (unsigned long)(est->rx_bd_overrun + + est->rx_fifo_overrun + + est->rx_overrun); + nst->rx_frame_errors = (unsigned long)(est->rx_bd_alignment_error + + est->rx_alignment_error); + nst->rx_crc_errors = (unsigned long)(est->rx_bd_bad_fcs + + est->rx_bad_fcs); + nst->rx_length_errors = (unsigned long)(est->rx_bd_runt_packet + + est->rx_bd_short_event + + est->rx_bd_packet_too_long + + est->rx_bd_out_of_range + + est->rx_bd_in_range + + est->rx_runt_packet + + est->rx_short_event + + est->rx_packet_too_long + + est->rx_out_of_range + + est->rx_in_range); + + nst->tx_errors = (unsigned long)(est->tx_bd_errors + est->tx_errors); + nst->tx_fifo_errors = (unsigned long)(est->tx_bd_underrun + + est->tx_underrun); + nst->tx_carrier_errors = (unsigned long)est->tx_bd_carrier_loss; + nst->collisions = (unsigned long)(est->tx_bd_excessive_deferral + + est->tx_bd_excessive_collisions + + est->tx_bd_late_collision + + est->tx_bd_multple_collisions); + spin_unlock_irqrestore(&dev->lock, flags); + return nst; +} + +static struct mal_commac_ops emac_commac_ops = { + .poll_tx = &emac_poll_tx, + .poll_rx = &emac_poll_rx, + .peek_rx = &emac_peek_rx, + .rxde = &emac_rxde, +}; + +static struct mal_commac_ops emac_commac_sg_ops = { + .poll_tx = &emac_poll_tx, + .poll_rx = &emac_poll_rx, + .peek_rx = &emac_peek_rx_sg, + .rxde = &emac_rxde, +}; + +/* Ethtool support */ +static int emac_ethtool_get_settings(struct net_device *ndev, + struct ethtool_cmd *cmd) +{ + struct emac_instance *dev = netdev_priv(ndev); + + cmd->supported = dev->phy.features; + cmd->port = PORT_MII; + cmd->phy_address = dev->phy.address; + cmd->transceiver = + dev->phy.address >= 0 ? XCVR_EXTERNAL : XCVR_INTERNAL; + + mutex_lock(&dev->link_lock); + cmd->advertising = dev->phy.advertising; + cmd->autoneg = dev->phy.autoneg; + cmd->speed = dev->phy.speed; + cmd->duplex = dev->phy.duplex; + mutex_unlock(&dev->link_lock); + + return 0; +} + +static int emac_ethtool_set_settings(struct net_device *ndev, + struct ethtool_cmd *cmd) +{ + struct emac_instance *dev = netdev_priv(ndev); + u32 f = dev->phy.features; + + DBG(dev, "set_settings(%d, %d, %d, 0x%08x)" NL, + cmd->autoneg, cmd->speed, cmd->duplex, cmd->advertising); + + /* Basic sanity checks */ + if (dev->phy.address < 0) + return -EOPNOTSUPP; + if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE) + return -EINVAL; + if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0) + return -EINVAL; + if (cmd->duplex != DUPLEX_HALF && cmd->duplex != DUPLEX_FULL) + return -EINVAL; + + if (cmd->autoneg == AUTONEG_DISABLE) { + switch (cmd->speed) { + case SPEED_10: + if (cmd->duplex == DUPLEX_HALF + && !(f & SUPPORTED_10baseT_Half)) + return -EINVAL; + if (cmd->duplex == DUPLEX_FULL + && !(f & SUPPORTED_10baseT_Full)) + return -EINVAL; + break; + case SPEED_100: + if (cmd->duplex == DUPLEX_HALF + && !(f & SUPPORTED_100baseT_Half)) + return -EINVAL; + if (cmd->duplex == DUPLEX_FULL + && !(f & SUPPORTED_100baseT_Full)) + return -EINVAL; + break; + case SPEED_1000: + if (cmd->duplex == DUPLEX_HALF + && !(f & SUPPORTED_1000baseT_Half)) + return -EINVAL; + if (cmd->duplex == DUPLEX_FULL + && !(f & SUPPORTED_1000baseT_Full)) + return -EINVAL; + break; + default: + return -EINVAL; + } + + mutex_lock(&dev->link_lock); + dev->phy.def->ops->setup_forced(&dev->phy, cmd->speed, + cmd->duplex); + mutex_unlock(&dev->link_lock); + + } else { + if (!(f & SUPPORTED_Autoneg)) + return -EINVAL; + + mutex_lock(&dev->link_lock); + dev->phy.def->ops->setup_aneg(&dev->phy, + (cmd->advertising & f) | + (dev->phy.advertising & + (ADVERTISED_Pause | + ADVERTISED_Asym_Pause))); + mutex_unlock(&dev->link_lock); + } + emac_force_link_update(dev); + + return 0; +} + +static void emac_ethtool_get_ringparam(struct net_device *ndev, + struct ethtool_ringparam *rp) +{ + rp->rx_max_pending = rp->rx_pending = NUM_RX_BUFF; + rp->tx_max_pending = rp->tx_pending = NUM_TX_BUFF; +} + +static void emac_ethtool_get_pauseparam(struct net_device *ndev, + struct ethtool_pauseparam *pp) +{ + struct emac_instance *dev = netdev_priv(ndev); + + mutex_lock(&dev->link_lock); + if ((dev->phy.features & SUPPORTED_Autoneg) && + (dev->phy.advertising & (ADVERTISED_Pause | ADVERTISED_Asym_Pause))) + pp->autoneg = 1; + + if (dev->phy.duplex == DUPLEX_FULL) { + if (dev->phy.pause) + pp->rx_pause = pp->tx_pause = 1; + else if (dev->phy.asym_pause) + pp->tx_pause = 1; + } + mutex_unlock(&dev->link_lock); +} + +static u32 emac_ethtool_get_rx_csum(struct net_device *ndev) +{ + struct emac_instance *dev = netdev_priv(ndev); + + return dev->tah_dev != 0; +} + +static int emac_get_regs_len(struct emac_instance *dev) +{ + if (emac_has_feature(dev, EMAC_FTR_EMAC4)) + return sizeof(struct emac_ethtool_regs_subhdr) + + EMAC4_ETHTOOL_REGS_SIZE; + else + return sizeof(struct emac_ethtool_regs_subhdr) + + EMAC_ETHTOOL_REGS_SIZE; +} + +static int emac_ethtool_get_regs_len(struct net_device *ndev) +{ + struct emac_instance *dev = netdev_priv(ndev); + int size; + + size = sizeof(struct emac_ethtool_regs_hdr) + + emac_get_regs_len(dev) + mal_get_regs_len(dev->mal); + if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII)) + size += zmii_get_regs_len(dev->zmii_dev); + if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) + size += rgmii_get_regs_len(dev->rgmii_dev); + if (emac_has_feature(dev, EMAC_FTR_HAS_TAH)) + size += tah_get_regs_len(dev->tah_dev); + + return size; +} + +static void *emac_dump_regs(struct emac_instance *dev, void *buf) +{ + struct emac_ethtool_regs_subhdr *hdr = buf; + + hdr->index = dev->cell_index; + if (emac_has_feature(dev, EMAC_FTR_EMAC4)) { + hdr->version = EMAC4_ETHTOOL_REGS_VER; + memcpy_fromio(hdr + 1, dev->emacp, EMAC4_ETHTOOL_REGS_SIZE); + return ((void *)(hdr + 1) + EMAC4_ETHTOOL_REGS_SIZE); + } else { + hdr->version = EMAC_ETHTOOL_REGS_VER; + memcpy_fromio(hdr + 1, dev->emacp, EMAC_ETHTOOL_REGS_SIZE); + return ((void *)(hdr + 1) + EMAC_ETHTOOL_REGS_SIZE); + } +} + +static void emac_ethtool_get_regs(struct net_device *ndev, + struct ethtool_regs *regs, void *buf) +{ + struct emac_instance *dev = netdev_priv(ndev); + struct emac_ethtool_regs_hdr *hdr = buf; + + hdr->components = 0; + buf = hdr + 1; + + buf = mal_dump_regs(dev->mal, buf); + buf = emac_dump_regs(dev, buf); + if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII)) { + hdr->components |= EMAC_ETHTOOL_REGS_ZMII; + buf = zmii_dump_regs(dev->zmii_dev, buf); + } + if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) { + hdr->components |= EMAC_ETHTOOL_REGS_RGMII; + buf = rgmii_dump_regs(dev->rgmii_dev, buf); + } + if (emac_has_feature(dev, EMAC_FTR_HAS_TAH)) { + hdr->components |= EMAC_ETHTOOL_REGS_TAH; + buf = tah_dump_regs(dev->tah_dev, buf); + } +} + +static int emac_ethtool_nway_reset(struct net_device *ndev) +{ + struct emac_instance *dev = netdev_priv(ndev); + int res = 0; + + DBG(dev, "nway_reset" NL); + + if (dev->phy.address < 0) + return -EOPNOTSUPP; + + mutex_lock(&dev->link_lock); + if (!dev->phy.autoneg) { + res = -EINVAL; + goto out; + } + + dev->phy.def->ops->setup_aneg(&dev->phy, dev->phy.advertising); + out: + mutex_unlock(&dev->link_lock); + emac_force_link_update(dev); + return res; +} + +static int emac_ethtool_get_stats_count(struct net_device *ndev) +{ + return EMAC_ETHTOOL_STATS_COUNT; +} + +static void emac_ethtool_get_strings(struct net_device *ndev, u32 stringset, + u8 * buf) +{ + if (stringset == ETH_SS_STATS) + memcpy(buf, &emac_stats_keys, sizeof(emac_stats_keys)); +} + +static void emac_ethtool_get_ethtool_stats(struct net_device *ndev, + struct ethtool_stats *estats, + u64 * tmp_stats) +{ + struct emac_instance *dev = netdev_priv(ndev); + + memcpy(tmp_stats, &dev->stats, sizeof(dev->stats)); + tmp_stats += sizeof(dev->stats) / sizeof(u64); + memcpy(tmp_stats, &dev->estats, sizeof(dev->estats)); +} + +static void emac_ethtool_get_drvinfo(struct net_device *ndev, + struct ethtool_drvinfo *info) +{ + struct emac_instance *dev = netdev_priv(ndev); + + strcpy(info->driver, "ibm_emac"); + strcpy(info->version, DRV_VERSION); + info->fw_version[0] = '\0'; + sprintf(info->bus_info, "PPC 4xx EMAC-%d %s", + dev->cell_index, dev->ofdev->node->full_name); + info->n_stats = emac_ethtool_get_stats_count(ndev); + info->regdump_len = emac_ethtool_get_regs_len(ndev); +} + +static const struct ethtool_ops emac_ethtool_ops = { + .get_settings = emac_ethtool_get_settings, + .set_settings = emac_ethtool_set_settings, + .get_drvinfo = emac_ethtool_get_drvinfo, + + .get_regs_len = emac_ethtool_get_regs_len, + .get_regs = emac_ethtool_get_regs, + + .nway_reset = emac_ethtool_nway_reset, + + .get_ringparam = emac_ethtool_get_ringparam, + .get_pauseparam = emac_ethtool_get_pauseparam, + + .get_rx_csum = emac_ethtool_get_rx_csum, + + .get_strings = emac_ethtool_get_strings, + .get_stats_count = emac_ethtool_get_stats_count, + .get_ethtool_stats = emac_ethtool_get_ethtool_stats, + + .get_link = ethtool_op_get_link, + .get_tx_csum = ethtool_op_get_tx_csum, + .get_sg = ethtool_op_get_sg, +}; + +static int emac_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd) +{ + struct emac_instance *dev = netdev_priv(ndev); + uint16_t *data = (uint16_t *) & rq->ifr_ifru; + + DBG(dev, "ioctl %08x" NL, cmd); + + if (dev->phy.address < 0) + return -EOPNOTSUPP; + + switch (cmd) { + case SIOCGMIIPHY: + case SIOCDEVPRIVATE: + data[0] = dev->phy.address; + /* Fall through */ + case SIOCGMIIREG: + case SIOCDEVPRIVATE + 1: + data[3] = emac_mdio_read(ndev, dev->phy.address, data[1]); + return 0; + + case SIOCSMIIREG: + case SIOCDEVPRIVATE + 2: + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + emac_mdio_write(ndev, dev->phy.address, data[1], data[2]); + return 0; + default: + return -EOPNOTSUPP; + } +} + +struct emac_depentry { + u32 phandle; + struct device_node *node; + struct of_device *ofdev; + void *drvdata; +}; + +#define EMAC_DEP_MAL_IDX 0 +#define EMAC_DEP_ZMII_IDX 1 +#define EMAC_DEP_RGMII_IDX 2 +#define EMAC_DEP_TAH_IDX 3 +#define EMAC_DEP_MDIO_IDX 4 +#define EMAC_DEP_PREV_IDX 5 +#define EMAC_DEP_COUNT 6 + +static int __devinit emac_check_deps(struct emac_instance *dev, + struct emac_depentry *deps) +{ + int i, there = 0; + struct device_node *np; + + for (i = 0; i < EMAC_DEP_COUNT; i++) { + /* no dependency on that item, allright */ + if (deps[i].phandle == 0) { + there++; + continue; + } + /* special case for blist as the dependency might go away */ + if (i == EMAC_DEP_PREV_IDX) { + np = *(dev->blist - 1); + if (np == NULL) { + deps[i].phandle = 0; + there++; + continue; + } + if (deps[i].node == NULL) + deps[i].node = of_node_get(np); + } + if (deps[i].node == NULL) + deps[i].node = of_find_node_by_phandle(deps[i].phandle); + if (deps[i].node == NULL) + continue; + if (deps[i].ofdev == NULL) + deps[i].ofdev = of_find_device_by_node(deps[i].node); + if (deps[i].ofdev == NULL) + continue; + if (deps[i].drvdata == NULL) + deps[i].drvdata = dev_get_drvdata(&deps[i].ofdev->dev); + if (deps[i].drvdata != NULL) + there++; + } + return (there == EMAC_DEP_COUNT); +} + +static void emac_put_deps(struct emac_instance *dev) +{ + if (dev->mal_dev) + of_dev_put(dev->mal_dev); + if (dev->zmii_dev) + of_dev_put(dev->zmii_dev); + if (dev->rgmii_dev) + of_dev_put(dev->rgmii_dev); + if (dev->mdio_dev) + of_dev_put(dev->mdio_dev); + if (dev->tah_dev) + of_dev_put(dev->tah_dev); +} + +static int __devinit emac_of_bus_notify(struct notifier_block *nb, + unsigned long action, void *data) +{ + /* We are only intereted in device addition */ + if (action == BUS_NOTIFY_BOUND_DRIVER) + wake_up_all(&emac_probe_wait); + return 0; +} + +static struct notifier_block emac_of_bus_notifier = { + .notifier_call = emac_of_bus_notify +}; + +static int __devinit emac_wait_deps(struct emac_instance *dev) +{ + struct emac_depentry deps[EMAC_DEP_COUNT]; + int i, err; + + memset(&deps, 0, sizeof(deps)); + + deps[EMAC_DEP_MAL_IDX].phandle = dev->mal_ph; + deps[EMAC_DEP_ZMII_IDX].phandle = dev->zmii_ph; + deps[EMAC_DEP_RGMII_IDX].phandle = dev->rgmii_ph; + if (dev->tah_ph) + deps[EMAC_DEP_TAH_IDX].phandle = dev->tah_ph; + if (dev->mdio_ph) + deps[EMAC_DEP_MDIO_IDX].phandle = dev->mdio_ph; + if (dev->blist && dev->blist > emac_boot_list) + deps[EMAC_DEP_PREV_IDX].phandle = 0xffffffffu; + bus_register_notifier(&of_platform_bus_type, &emac_of_bus_notifier); + wait_event_timeout(emac_probe_wait, + emac_check_deps(dev, deps), + EMAC_PROBE_DEP_TIMEOUT); + bus_unregister_notifier(&of_platform_bus_type, &emac_of_bus_notifier); + err = emac_check_deps(dev, deps) ? 0 : -ENODEV; + for (i = 0; i < EMAC_DEP_COUNT; i++) { + if (deps[i].node) + of_node_put(deps[i].node); + if (err && deps[i].ofdev) + of_dev_put(deps[i].ofdev); + } + if (err == 0) { + dev->mal_dev = deps[EMAC_DEP_MAL_IDX].ofdev; + dev->zmii_dev = deps[EMAC_DEP_ZMII_IDX].ofdev; + dev->rgmii_dev = deps[EMAC_DEP_RGMII_IDX].ofdev; + dev->tah_dev = deps[EMAC_DEP_TAH_IDX].ofdev; + dev->mdio_dev = deps[EMAC_DEP_MDIO_IDX].ofdev; + } + if (deps[EMAC_DEP_PREV_IDX].ofdev) + of_dev_put(deps[EMAC_DEP_PREV_IDX].ofdev); + return err; +} + +static int __devinit emac_read_uint_prop(struct device_node *np, const char *name, + u32 *val, int fatal) +{ + int len; + const u32 *prop = of_get_property(np, name, &len); + if (prop == NULL || len < sizeof(u32)) { + if (fatal) + printk(KERN_ERR "%s: missing %s property\n", + np->full_name, name); + return -ENODEV; + } + *val = *prop; + return 0; +} + +static int __devinit emac_init_phy(struct emac_instance *dev) +{ + struct device_node *np = dev->ofdev->node; + struct net_device *ndev = dev->ndev; + u32 phy_map, adv; + int i; + + dev->phy.dev = ndev; + dev->phy.mode = dev->phy_mode; + + /* PHY-less configuration. + * XXX I probably should move these settings to the dev tree + */ + if (dev->phy_address == 0xffffffff && dev->phy_map == 0xffffffff) { + emac_reset(dev); + + /* PHY-less configuration. + * XXX I probably should move these settings to the dev tree + */ + dev->phy.address = -1; + dev->phy.features = SUPPORTED_100baseT_Full | SUPPORTED_MII; + dev->phy.pause = 1; + + return 0; + } + + mutex_lock(&emac_phy_map_lock); + phy_map = dev->phy_map | busy_phy_map; + + DBG(dev, "PHY maps %08x %08x" NL, dev->phy_map, busy_phy_map); + + dev->phy.mdio_read = emac_mdio_read; + dev->phy.mdio_write = emac_mdio_write; + + /* Configure EMAC with defaults so we can at least use MDIO + * This is needed mostly for 440GX + */ + if (emac_phy_gpcs(dev->phy.mode)) { + /* XXX + * Make GPCS PHY address equal to EMAC index. + * We probably should take into account busy_phy_map + * and/or phy_map here. + * + * Note that the busy_phy_map is currently global + * while it should probably be per-ASIC... + */ + dev->phy.address = dev->cell_index; + } + + emac_configure(dev); + + if (dev->phy_address != 0xffffffff) + phy_map = ~(1 << dev->phy_address); + + for (i = 0; i < 0x20; phy_map >>= 1, ++i) + if (!(phy_map & 1)) { + int r; + busy_phy_map |= 1 << i; + + /* Quick check if there is a PHY at the address */ + r = emac_mdio_read(dev->ndev, i, MII_BMCR); + if (r == 0xffff || r < 0) + continue; + if (!emac_mii_phy_probe(&dev->phy, i)) + break; + } + mutex_unlock(&emac_phy_map_lock); + if (i == 0x20) { + printk(KERN_WARNING "%s: can't find PHY!\n", np->full_name); + return -ENXIO; + } + + /* Init PHY */ + if (dev->phy.def->ops->init) + dev->phy.def->ops->init(&dev->phy); + + /* Disable any PHY features not supported by the platform */ + dev->phy.def->features &= ~dev->phy_feat_exc; + + /* Setup initial link parameters */ + if (dev->phy.features & SUPPORTED_Autoneg) { + adv = dev->phy.features; + if (!emac_has_feature(dev, EMAC_FTR_NO_FLOW_CONTROL_40x)) + adv |= ADVERTISED_Pause | ADVERTISED_Asym_Pause; + /* Restart autonegotiation */ + dev->phy.def->ops->setup_aneg(&dev->phy, adv); + } else { + u32 f = dev->phy.def->features; + int speed = SPEED_10, fd = DUPLEX_HALF; + + /* Select highest supported speed/duplex */ + if (f & SUPPORTED_1000baseT_Full) { + speed = SPEED_1000; + fd = DUPLEX_FULL; + } else if (f & SUPPORTED_1000baseT_Half) + speed = SPEED_1000; + else if (f & SUPPORTED_100baseT_Full) { + speed = SPEED_100; + fd = DUPLEX_FULL; + } else if (f & SUPPORTED_100baseT_Half) + speed = SPEED_100; + else if (f & SUPPORTED_10baseT_Full) + fd = DUPLEX_FULL; + + /* Force link parameters */ + dev->phy.def->ops->setup_forced(&dev->phy, speed, fd); + } + return 0; +} + +static int __devinit emac_init_config(struct emac_instance *dev) +{ + struct device_node *np = dev->ofdev->node; + const void *p; + unsigned int plen; + const char *pm, *phy_modes[] = { + [PHY_MODE_NA] = "", + [PHY_MODE_MII] = "mii", + [PHY_MODE_RMII] = "rmii", + [PHY_MODE_SMII] = "smii", + [PHY_MODE_RGMII] = "rgmii", + [PHY_MODE_TBI] = "tbi", + [PHY_MODE_GMII] = "gmii", + [PHY_MODE_RTBI] = "rtbi", + [PHY_MODE_SGMII] = "sgmii", + }; + + /* Read config from device-tree */ + if (emac_read_uint_prop(np, "mal-device", &dev->mal_ph, 1)) + return -ENXIO; + if (emac_read_uint_prop(np, "mal-tx-channel", &dev->mal_tx_chan, 1)) + return -ENXIO; + if (emac_read_uint_prop(np, "mal-rx-channel", &dev->mal_rx_chan, 1)) + return -ENXIO; + if (emac_read_uint_prop(np, "cell-index", &dev->cell_index, 1)) + return -ENXIO; + if (emac_read_uint_prop(np, "max-frame-size", &dev->max_mtu, 0)) + dev->max_mtu = 1500; + if (emac_read_uint_prop(np, "rx-fifo-size", &dev->rx_fifo_size, 0)) + dev->rx_fifo_size = 2048; + if (emac_read_uint_prop(np, "tx-fifo-size", &dev->tx_fifo_size, 0)) + dev->tx_fifo_size = 2048; + if (emac_read_uint_prop(np, "rx-fifo-size-gige", &dev->rx_fifo_size_gige, 0)) + dev->rx_fifo_size_gige = dev->rx_fifo_size; + if (emac_read_uint_prop(np, "tx-fifo-size-gige", &dev->tx_fifo_size_gige, 0)) + dev->tx_fifo_size_gige = dev->tx_fifo_size; + if (emac_read_uint_prop(np, "phy-address", &dev->phy_address, 0)) + dev->phy_address = 0xffffffff; + if (emac_read_uint_prop(np, "phy-map", &dev->phy_map, 0)) + dev->phy_map = 0xffffffff; + if (emac_read_uint_prop(np->parent, "clock-frequency", &dev->opb_bus_freq, 1)) + return -ENXIO; + if (emac_read_uint_prop(np, "tah-device", &dev->tah_ph, 0)) + dev->tah_ph = 0; + if (emac_read_uint_prop(np, "tah-channel", &dev->tah_port, 0)) + dev->tah_ph = 0; + if (emac_read_uint_prop(np, "mdio-device", &dev->mdio_ph, 0)) + dev->mdio_ph = 0; + if (emac_read_uint_prop(np, "zmii-device", &dev->zmii_ph, 0)) + dev->zmii_ph = 0;; + if (emac_read_uint_prop(np, "zmii-channel", &dev->zmii_port, 0)) + dev->zmii_port = 0xffffffff;; + if (emac_read_uint_prop(np, "rgmii-device", &dev->rgmii_ph, 0)) + dev->rgmii_ph = 0;; + if (emac_read_uint_prop(np, "rgmii-channel", &dev->rgmii_port, 0)) + dev->rgmii_port = 0xffffffff;; + if (emac_read_uint_prop(np, "fifo-entry-size", &dev->fifo_entry_size, 0)) + dev->fifo_entry_size = 16; + if (emac_read_uint_prop(np, "mal-burst-size", &dev->mal_burst_size, 0)) + dev->mal_burst_size = 256; + + /* PHY mode needs some decoding */ + dev->phy_mode = PHY_MODE_NA; + pm = of_get_property(np, "phy-mode", &plen); + if (pm != NULL) { + int i; + for (i = 0; i < ARRAY_SIZE(phy_modes); i++) + if (!strcasecmp(pm, phy_modes[i])) { + dev->phy_mode = i; + break; + } + } + + /* Backward compat with non-final DT */ + if (dev->phy_mode == PHY_MODE_NA && pm != NULL && plen == 4) { + u32 nmode = *(const u32 *)pm; + if (nmode > PHY_MODE_NA && nmode <= PHY_MODE_SGMII) + dev->phy_mode = nmode; + } + + /* Check EMAC version */ + if (of_device_is_compatible(np, "ibm,emac4")) + dev->features |= EMAC_FTR_EMAC4; + if (of_device_is_compatible(np, "ibm,emac-axon") + || of_device_is_compatible(np, "ibm,emac-440epx")) + dev->features |= EMAC_FTR_HAS_AXON_STACR + | EMAC_FTR_STACR_OC_INVERT; + if (of_device_is_compatible(np, "ibm,emac-440spe")) + dev->features |= EMAC_FTR_STACR_OC_INVERT; + + /* Fixup some feature bits based on the device tree and verify + * we have support for them compiled in + */ + if (dev->tah_ph != 0) { +#ifdef CONFIG_IBM_NEW_EMAC_TAH + dev->features |= EMAC_FTR_HAS_TAH; +#else + printk(KERN_ERR "%s: TAH support not enabled !\n", + np->full_name); + return -ENXIO; +#endif + } + + if (dev->zmii_ph != 0) { +#ifdef CONFIG_IBM_NEW_EMAC_ZMII + dev->features |= EMAC_FTR_HAS_ZMII; +#else + printk(KERN_ERR "%s: ZMII support not enabled !\n", + np->full_name); + return -ENXIO; +#endif + } + + if (dev->rgmii_ph != 0) { +#ifdef CONFIG_IBM_NEW_EMAC_RGMII + dev->features |= EMAC_FTR_HAS_RGMII; +#else + printk(KERN_ERR "%s: RGMII support not enabled !\n", + np->full_name); + return -ENXIO; +#endif + } + + /* Read MAC-address */ + p = of_get_property(np, "local-mac-address", NULL); + if (p == NULL) { + printk(KERN_ERR "%s: Can't find local-mac-address property\n", + np->full_name); + return -ENXIO; + } + memcpy(dev->ndev->dev_addr, p, 6); + + DBG(dev, "features : 0x%08x / 0x%08x\n", dev->features, EMAC_FTRS_POSSIBLE); + DBG(dev, "tx_fifo_size : %d (%d gige)\n", dev->tx_fifo_size, dev->tx_fifo_size_gige); + DBG(dev, "rx_fifo_size : %d (%d gige)\n", dev->rx_fifo_size, dev->rx_fifo_size_gige); + DBG(dev, "max_mtu : %d\n", dev->max_mtu); + DBG(dev, "OPB freq : %d\n", dev->opb_bus_freq); + + return 0; +} + +static int __devinit emac_probe(struct of_device *ofdev, + const struct of_device_id *match) +{ + struct net_device *ndev; + struct emac_instance *dev; + struct device_node *np = ofdev->node; + struct device_node **blist = NULL; + int err, i; + + /* Find ourselves in the bootlist if we are there */ + for (i = 0; i < EMAC_BOOT_LIST_SIZE; i++) + if (emac_boot_list[i] == np) + blist = &emac_boot_list[i]; + + /* Allocate our net_device structure */ + err = -ENOMEM; + ndev = alloc_etherdev(sizeof(struct emac_instance)); + if (!ndev) { + printk(KERN_ERR "%s: could not allocate ethernet device!\n", + np->full_name); + goto err_gone; + } + dev = netdev_priv(ndev); + dev->ndev = ndev; + dev->ofdev = ofdev; + dev->blist = blist; + SET_MODULE_OWNER(ndev); + SET_NETDEV_DEV(ndev, &ofdev->dev); + + /* Initialize some embedded data structures */ + mutex_init(&dev->mdio_lock); + mutex_init(&dev->link_lock); + spin_lock_init(&dev->lock); + INIT_WORK(&dev->reset_work, emac_reset_work); + + /* Init various config data based on device-tree */ + err = emac_init_config(dev); + if (err != 0) + goto err_free; + + /* Get interrupts. EMAC irq is mandatory, WOL irq is optional */ + dev->emac_irq = irq_of_parse_and_map(np, 0); + dev->wol_irq = irq_of_parse_and_map(np, 1); + if (dev->emac_irq == NO_IRQ) { + printk(KERN_ERR "%s: Can't map main interrupt\n", np->full_name); + goto err_free; + } + ndev->irq = dev->emac_irq; + + /* Map EMAC regs */ + if (of_address_to_resource(np, 0, &dev->rsrc_regs)) { + printk(KERN_ERR "%s: Can't get registers address\n", + np->full_name); + goto err_irq_unmap; + } + // TODO : request_mem_region + dev->emacp = ioremap(dev->rsrc_regs.start, sizeof(struct emac_regs)); + if (dev->emacp == NULL) { + printk(KERN_ERR "%s: Can't map device registers!\n", + np->full_name); + err = -ENOMEM; + goto err_irq_unmap; + } + + /* Wait for dependent devices */ + err = emac_wait_deps(dev); + if (err) { + printk(KERN_ERR + "%s: Timeout waiting for dependent devices\n", + np->full_name); + /* display more info about what's missing ? */ + goto err_reg_unmap; + } + dev->mal = dev_get_drvdata(&dev->mal_dev->dev); + if (dev->mdio_dev != NULL) + dev->mdio_instance = dev_get_drvdata(&dev->mdio_dev->dev); + + /* Register with MAL */ + dev->commac.ops = &emac_commac_ops; + dev->commac.dev = dev; + dev->commac.tx_chan_mask = MAL_CHAN_MASK(dev->mal_tx_chan); + dev->commac.rx_chan_mask = MAL_CHAN_MASK(dev->mal_rx_chan); + err = mal_register_commac(dev->mal, &dev->commac); + if (err) { + printk(KERN_ERR "%s: failed to register with mal %s!\n", + np->full_name, dev->mal_dev->node->full_name); + goto err_rel_deps; + } + dev->rx_skb_size = emac_rx_skb_size(ndev->mtu); + dev->rx_sync_size = emac_rx_sync_size(ndev->mtu); + + /* Get pointers to BD rings */ + dev->tx_desc = + dev->mal->bd_virt + mal_tx_bd_offset(dev->mal, dev->mal_tx_chan); + dev->rx_desc = + dev->mal->bd_virt + mal_rx_bd_offset(dev->mal, dev->mal_rx_chan); + + DBG(dev, "tx_desc %p" NL, dev->tx_desc); + DBG(dev, "rx_desc %p" NL, dev->rx_desc); + + /* Clean rings */ + memset(dev->tx_desc, 0, NUM_TX_BUFF * sizeof(struct mal_descriptor)); + memset(dev->rx_desc, 0, NUM_RX_BUFF * sizeof(struct mal_descriptor)); + + /* Attach to ZMII, if needed */ + if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII) && + (err = zmii_attach(dev->zmii_dev, dev->zmii_port, &dev->phy_mode)) != 0) + goto err_unreg_commac; + + /* Attach to RGMII, if needed */ + if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII) && + (err = rgmii_attach(dev->rgmii_dev, dev->rgmii_port, dev->phy_mode)) != 0) + goto err_detach_zmii; + + /* Attach to TAH, if needed */ + if (emac_has_feature(dev, EMAC_FTR_HAS_TAH) && + (err = tah_attach(dev->tah_dev, dev->tah_port)) != 0) + goto err_detach_rgmii; + + /* Set some link defaults before we can find out real parameters */ + dev->phy.speed = SPEED_100; + dev->phy.duplex = DUPLEX_FULL; + dev->phy.autoneg = AUTONEG_DISABLE; + dev->phy.pause = dev->phy.asym_pause = 0; + dev->stop_timeout = STOP_TIMEOUT_100; + INIT_DELAYED_WORK(&dev->link_work, emac_link_timer); + + /* Find PHY if any */ + err = emac_init_phy(dev); + if (err != 0) + goto err_detach_tah; + + /* Fill in the driver function table */ + ndev->open = &emac_open; +#ifdef CONFIG_IBM_NEW_EMAC_TAH + if (dev->tah_dev) { + ndev->hard_start_xmit = &emac_start_xmit_sg; + ndev->features |= NETIF_F_IP_CSUM | NETIF_F_SG; + } else +#endif + ndev->hard_start_xmit = &emac_start_xmit; + ndev->tx_timeout = &emac_tx_timeout; + ndev->watchdog_timeo = 5 * HZ; + ndev->stop = &emac_close; + ndev->get_stats = &emac_stats; + ndev->set_multicast_list = &emac_set_multicast_list; + ndev->do_ioctl = &emac_ioctl; + if (emac_phy_supports_gige(dev->phy_mode)) { + ndev->change_mtu = &emac_change_mtu; + dev->commac.ops = &emac_commac_sg_ops; + } + SET_ETHTOOL_OPS(ndev, &emac_ethtool_ops); + + netif_carrier_off(ndev); + netif_stop_queue(ndev); + + err = register_netdev(ndev); + if (err) { + printk(KERN_ERR "%s: failed to register net device (%d)!\n", + np->full_name, err); + goto err_detach_tah; + } + + /* Set our drvdata last as we don't want them visible until we are + * fully initialized + */ + wmb(); + dev_set_drvdata(&ofdev->dev, dev); + + /* There's a new kid in town ! Let's tell everybody */ + wake_up_all(&emac_probe_wait); + + + printk(KERN_INFO + "%s: EMAC-%d %s, MAC %02x:%02x:%02x:%02x:%02x:%02x\n", + ndev->name, dev->cell_index, np->full_name, + ndev->dev_addr[0], ndev->dev_addr[1], ndev->dev_addr[2], + ndev->dev_addr[3], ndev->dev_addr[4], ndev->dev_addr[5]); + + if (dev->phy.address >= 0) + printk("%s: found %s PHY (0x%02x)\n", ndev->name, + dev->phy.def->name, dev->phy.address); + + emac_dbg_register(dev); + + /* Life is good */ + return 0; + + /* I have a bad feeling about this ... */ + + err_detach_tah: + if (emac_has_feature(dev, EMAC_FTR_HAS_TAH)) + tah_detach(dev->tah_dev, dev->tah_port); + err_detach_rgmii: + if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) + rgmii_detach(dev->rgmii_dev, dev->rgmii_port); + err_detach_zmii: + if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII)) + zmii_detach(dev->zmii_dev, dev->zmii_port); + err_unreg_commac: + mal_unregister_commac(dev->mal, &dev->commac); + err_rel_deps: + emac_put_deps(dev); + err_reg_unmap: + iounmap(dev->emacp); + err_irq_unmap: + if (dev->wol_irq != NO_IRQ) + irq_dispose_mapping(dev->wol_irq); + if (dev->emac_irq != NO_IRQ) + irq_dispose_mapping(dev->emac_irq); + err_free: + kfree(ndev); + err_gone: + /* if we were on the bootlist, remove us as we won't show up and + * wake up all waiters to notify them in case they were waiting + * on us + */ + if (blist) { + *blist = NULL; + wake_up_all(&emac_probe_wait); + } + return err; +} + +static int __devexit emac_remove(struct of_device *ofdev) +{ + struct emac_instance *dev = dev_get_drvdata(&ofdev->dev); + + DBG(dev, "remove" NL); + + dev_set_drvdata(&ofdev->dev, NULL); + + unregister_netdev(dev->ndev); + + if (emac_has_feature(dev, EMAC_FTR_HAS_TAH)) + tah_detach(dev->tah_dev, dev->tah_port); + if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) + rgmii_detach(dev->rgmii_dev, dev->rgmii_port); + if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII)) + zmii_detach(dev->zmii_dev, dev->zmii_port); + + mal_unregister_commac(dev->mal, &dev->commac); + emac_put_deps(dev); + + emac_dbg_unregister(dev); + iounmap(dev->emacp); + + if (dev->wol_irq != NO_IRQ) + irq_dispose_mapping(dev->wol_irq); + if (dev->emac_irq != NO_IRQ) + irq_dispose_mapping(dev->emac_irq); + + kfree(dev->ndev); + + return 0; +} + +/* XXX Features in here should be replaced by properties... */ +static struct of_device_id emac_match[] = +{ + { + .type = "network", + .compatible = "ibm,emac", + }, + { + .type = "network", + .compatible = "ibm,emac4", + }, + {}, +}; + +static struct of_platform_driver emac_driver = { + .name = "emac", + .match_table = emac_match, + + .probe = emac_probe, + .remove = emac_remove, +}; + +static void __init emac_make_bootlist(void) +{ + struct device_node *np = NULL; + int j, max, i = 0, k; + int cell_indices[EMAC_BOOT_LIST_SIZE]; + + /* Collect EMACs */ + while((np = of_find_all_nodes(np)) != NULL) { + const u32 *idx; + + if (of_match_node(emac_match, np) == NULL) + continue; + if (of_get_property(np, "unused", NULL)) + continue; + idx = of_get_property(np, "cell-index", NULL); + if (idx == NULL) + continue; + cell_indices[i] = *idx; + emac_boot_list[i++] = of_node_get(np); + if (i >= EMAC_BOOT_LIST_SIZE) { + of_node_put(np); + break; + } + } + max = i; + + /* Bubble sort them (doh, what a creative algorithm :-) */ + for (i = 0; max > 1 && (i < (max - 1)); i++) + for (j = i; j < max; j++) { + if (cell_indices[i] > cell_indices[j]) { + np = emac_boot_list[i]; + emac_boot_list[i] = emac_boot_list[j]; + emac_boot_list[j] = np; + k = cell_indices[i]; + cell_indices[i] = cell_indices[j]; + cell_indices[j] = k; + } + } +} + +static int __init emac_init(void) +{ + int rc; + + printk(KERN_INFO DRV_DESC ", version " DRV_VERSION "\n"); + + /* Init debug stuff */ + emac_init_debug(); + + /* Build EMAC boot list */ + emac_make_bootlist(); + + /* Init submodules */ + rc = mal_init(); + if (rc) + goto err; + rc = zmii_init(); + if (rc) + goto err_mal; + rc = rgmii_init(); + if (rc) + goto err_zmii; + rc = tah_init(); + if (rc) + goto err_rgmii; + rc = of_register_platform_driver(&emac_driver); + if (rc) + goto err_tah; + + return 0; + + err_tah: + tah_exit(); + err_rgmii: + rgmii_exit(); + err_zmii: + zmii_exit(); + err_mal: + mal_exit(); + err: + return rc; +} + +static void __exit emac_exit(void) +{ + int i; + + of_unregister_platform_driver(&emac_driver); + + tah_exit(); + rgmii_exit(); + zmii_exit(); + mal_exit(); + emac_fini_debug(); + + /* Destroy EMAC boot list */ + for (i = 0; i < EMAC_BOOT_LIST_SIZE; i++) + if (emac_boot_list[i]) + of_node_put(emac_boot_list[i]); +} + +module_init(emac_init); +module_exit(emac_exit); diff --git a/drivers/net/ibm_newemac/core.h b/drivers/net/ibm_newemac/core.h new file mode 100644 index 000000000000..4011803117ca --- /dev/null +++ b/drivers/net/ibm_newemac/core.h @@ -0,0 +1,355 @@ +/* + * drivers/net/ibm_newemac/core.h + * + * Driver for PowerPC 4xx on-chip ethernet controller. + * + * Copyright (c) 2004, 2005 Zultys Technologies. + * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> + * + * Based on original work by + * Armin Kuster <akuster@mvista.com> + * Johnnie Peters <jpeters@mvista.com> + * Copyright 2000, 2001 MontaVista Softare Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#ifndef __IBM_NEWEMAC_CORE_H +#define __IBM_NEWEMAC_CORE_H + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/netdevice.h> +#include <linux/dma-mapping.h> +#include <linux/spinlock.h> + +#include <asm/of_platform.h> +#include <asm/io.h> +#include <asm/dcr.h> + +#include "emac.h" +#include "phy.h" +#include "zmii.h" +#include "rgmii.h" +#include "mal.h" +#include "tah.h" +#include "debug.h" + +#define NUM_TX_BUFF CONFIG_IBM_NEW_EMAC_TXB +#define NUM_RX_BUFF CONFIG_IBM_NEW_EMAC_RXB + +/* Simple sanity check */ +#if NUM_TX_BUFF > 256 || NUM_RX_BUFF > 256 +#error Invalid number of buffer descriptors (greater than 256) +#endif + +#define EMAC_MIN_MTU 46 + +/* Maximum L2 header length (VLAN tagged, no FCS) */ +#define EMAC_MTU_OVERHEAD (6 * 2 + 2 + 4) + +/* RX BD size for the given MTU */ +static inline int emac_rx_size(int mtu) +{ + if (mtu > ETH_DATA_LEN) + return MAL_MAX_RX_SIZE; + else + return mal_rx_size(ETH_DATA_LEN + EMAC_MTU_OVERHEAD); +} + +#define EMAC_DMA_ALIGN(x) ALIGN((x), dma_get_cache_alignment()) + +#define EMAC_RX_SKB_HEADROOM \ + EMAC_DMA_ALIGN(CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM) + +/* Size of RX skb for the given MTU */ +static inline int emac_rx_skb_size(int mtu) +{ + int size = max(mtu + EMAC_MTU_OVERHEAD, emac_rx_size(mtu)); + return EMAC_DMA_ALIGN(size + 2) + EMAC_RX_SKB_HEADROOM; +} + +/* RX DMA sync size */ +static inline int emac_rx_sync_size(int mtu) +{ + return EMAC_DMA_ALIGN(emac_rx_size(mtu) + 2); +} + +/* Driver statistcs is split into two parts to make it more cache friendly: + * - normal statistics (packet count, etc) + * - error statistics + * + * When statistics is requested by ethtool, these parts are concatenated, + * normal one goes first. + * + * Please, keep these structures in sync with emac_stats_keys. + */ + +/* Normal TX/RX Statistics */ +struct emac_stats { + u64 rx_packets; + u64 rx_bytes; + u64 tx_packets; + u64 tx_bytes; + u64 rx_packets_csum; + u64 tx_packets_csum; +}; + +/* Error statistics */ +struct emac_error_stats { + u64 tx_undo; + + /* Software RX Errors */ + u64 rx_dropped_stack; + u64 rx_dropped_oom; + u64 rx_dropped_error; + u64 rx_dropped_resize; + u64 rx_dropped_mtu; + u64 rx_stopped; + /* BD reported RX errors */ + u64 rx_bd_errors; + u64 rx_bd_overrun; + u64 rx_bd_bad_packet; + u64 rx_bd_runt_packet; + u64 rx_bd_short_event; + u64 rx_bd_alignment_error; + u64 rx_bd_bad_fcs; + u64 rx_bd_packet_too_long; + u64 rx_bd_out_of_range; + u64 rx_bd_in_range; + /* EMAC IRQ reported RX errors */ + u64 rx_parity; + u64 rx_fifo_overrun; + u64 rx_overrun; + u64 rx_bad_packet; + u64 rx_runt_packet; + u64 rx_short_event; + u64 rx_alignment_error; + u64 rx_bad_fcs; + u64 rx_packet_too_long; + u64 rx_out_of_range; + u64 rx_in_range; + + /* Software TX Errors */ + u64 tx_dropped; + /* BD reported TX errors */ + u64 tx_bd_errors; + u64 tx_bd_bad_fcs; + u64 tx_bd_carrier_loss; + u64 tx_bd_excessive_deferral; + u64 tx_bd_excessive_collisions; + u64 tx_bd_late_collision; + u64 tx_bd_multple_collisions; + u64 tx_bd_single_collision; + u64 tx_bd_underrun; + u64 tx_bd_sqe; + /* EMAC IRQ reported TX errors */ + u64 tx_parity; + u64 tx_underrun; + u64 tx_sqe; + u64 tx_errors; +}; + +#define EMAC_ETHTOOL_STATS_COUNT ((sizeof(struct emac_stats) + \ + sizeof(struct emac_error_stats)) \ + / sizeof(u64)) + +struct emac_instance { + struct net_device *ndev; + struct resource rsrc_regs; + struct emac_regs __iomem *emacp; + struct of_device *ofdev; + struct device_node **blist; /* bootlist entry */ + + /* MAL linkage */ + u32 mal_ph; + struct of_device *mal_dev; + u32 mal_rx_chan; + u32 mal_tx_chan; + struct mal_instance *mal; + struct mal_commac commac; + + /* PHY infos */ + u32 phy_mode; + u32 phy_map; + u32 phy_address; + u32 phy_feat_exc; + struct mii_phy phy; + struct mutex link_lock; + struct delayed_work link_work; + int link_polling; + + /* Shared MDIO if any */ + u32 mdio_ph; + struct of_device *mdio_dev; + struct emac_instance *mdio_instance; + struct mutex mdio_lock; + + /* ZMII infos if any */ + u32 zmii_ph; + u32 zmii_port; + struct of_device *zmii_dev; + + /* RGMII infos if any */ + u32 rgmii_ph; + u32 rgmii_port; + struct of_device *rgmii_dev; + + /* TAH infos if any */ + u32 tah_ph; + u32 tah_port; + struct of_device *tah_dev; + + /* IRQs */ + int wol_irq; + int emac_irq; + + /* OPB bus frequency in Mhz */ + u32 opb_bus_freq; + + /* Cell index within an ASIC (for clk mgmnt) */ + u32 cell_index; + + /* Max supported MTU */ + u32 max_mtu; + + /* Feature bits (from probe table) */ + unsigned int features; + + /* Tx and Rx fifo sizes & other infos in bytes */ + u32 tx_fifo_size; + u32 tx_fifo_size_gige; + u32 rx_fifo_size; + u32 rx_fifo_size_gige; + u32 fifo_entry_size; + u32 mal_burst_size; /* move to MAL ? */ + + /* Descriptor management + */ + struct mal_descriptor *tx_desc; + int tx_cnt; + int tx_slot; + int ack_slot; + + struct mal_descriptor *rx_desc; + int rx_slot; + struct sk_buff *rx_sg_skb; /* 1 */ + int rx_skb_size; + int rx_sync_size; + + struct sk_buff *tx_skb[NUM_TX_BUFF]; + struct sk_buff *rx_skb[NUM_RX_BUFF]; + + /* Stats + */ + struct emac_error_stats estats; + struct net_device_stats nstats; + struct emac_stats stats; + + /* Misc + */ + int reset_failed; + int stop_timeout; /* in us */ + int no_mcast; + int mcast_pending; + struct work_struct reset_work; + spinlock_t lock; +}; + +/* + * Features of various EMAC implementations + */ + +/* + * No flow control on 40x according to the original driver + */ +#define EMAC_FTR_NO_FLOW_CONTROL_40x 0x00000001 +/* + * Cell is an EMAC4 + */ +#define EMAC_FTR_EMAC4 0x00000002 +/* + * For the 440SPe, AMCC inexplicably changed the polarity of + * the "operation complete" bit in the MII control register. + */ +#define EMAC_FTR_STACR_OC_INVERT 0x00000004 +/* + * Set if we have a TAH. + */ +#define EMAC_FTR_HAS_TAH 0x00000008 +/* + * Set if we have a ZMII. + */ +#define EMAC_FTR_HAS_ZMII 0x00000010 +/* + * Set if we have a RGMII. + */ +#define EMAC_FTR_HAS_RGMII 0x00000020 +/* + * Set if we have axon-type STACR + */ +#define EMAC_FTR_HAS_AXON_STACR 0x00000040 + + +/* Right now, we don't quite handle the always/possible masks on the + * most optimal way as we don't have a way to say something like + * always EMAC4. Patches welcome. + */ +enum { + EMAC_FTRS_ALWAYS = 0, + + EMAC_FTRS_POSSIBLE = +#ifdef CONFIG_IBM_NEW_EMAC_EMAC4 + EMAC_FTR_EMAC4 | EMAC_FTR_HAS_AXON_STACR | + EMAC_FTR_STACR_OC_INVERT | +#endif +#ifdef CONFIG_IBM_NEW_EMAC_TAH + EMAC_FTR_HAS_TAH | +#endif +#ifdef CONFIG_IBM_NEW_EMAC_ZMII + EMAC_FTR_HAS_ZMII | +#endif +#ifdef CONFIG_IBM_NEW_EMAC_RGMII + EMAC_FTR_HAS_RGMII | +#endif + 0, +}; + +static inline int emac_has_feature(struct emac_instance *dev, + unsigned long feature) +{ + return (EMAC_FTRS_ALWAYS & feature) || + (EMAC_FTRS_POSSIBLE & dev->features & feature); +} + + +/* Ethtool get_regs complex data. + * We want to get not just EMAC registers, but also MAL, ZMII, RGMII, TAH + * when available. + * + * Returned BLOB consists of the ibm_emac_ethtool_regs_hdr, + * MAL registers, EMAC registers and optional ZMII, RGMII, TAH registers. + * Each register component is preceded with emac_ethtool_regs_subhdr. + * Order of the optional headers follows their relative bit posititions + * in emac_ethtool_regs_hdr.components + */ +#define EMAC_ETHTOOL_REGS_ZMII 0x00000001 +#define EMAC_ETHTOOL_REGS_RGMII 0x00000002 +#define EMAC_ETHTOOL_REGS_TAH 0x00000004 + +struct emac_ethtool_regs_hdr { + u32 components; +}; + +struct emac_ethtool_regs_subhdr { + u32 version; + u32 index; +}; + +#endif /* __IBM_NEWEMAC_CORE_H */ diff --git a/drivers/net/ibm_newemac/debug.c b/drivers/net/ibm_newemac/debug.c new file mode 100644 index 000000000000..170524ee0f19 --- /dev/null +++ b/drivers/net/ibm_newemac/debug.c @@ -0,0 +1,238 @@ +/* + * drivers/net/ibm_newemac/debug.c + * + * Driver for PowerPC 4xx on-chip ethernet controller, debug print routines. + * + * Copyright (c) 2004, 2005 Zultys Technologies + * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/netdevice.h> +#include <linux/sysrq.h> +#include <asm/io.h> + +#include "core.h" + +static spinlock_t emac_dbg_lock = SPIN_LOCK_UNLOCKED; + +static void emac_desc_dump(struct emac_instance *p) +{ + int i; + printk("** EMAC %s TX BDs **\n" + " tx_cnt = %d tx_slot = %d ack_slot = %d\n", + p->ofdev->node->full_name, + p->tx_cnt, p->tx_slot, p->ack_slot); + for (i = 0; i < NUM_TX_BUFF / 2; ++i) + printk + ("bd[%2d] 0x%08x %c 0x%04x %4u - bd[%2d] 0x%08x %c 0x%04x %4u\n", + i, p->tx_desc[i].data_ptr, p->tx_skb[i] ? 'V' : ' ', + p->tx_desc[i].ctrl, p->tx_desc[i].data_len, + NUM_TX_BUFF / 2 + i, + p->tx_desc[NUM_TX_BUFF / 2 + i].data_ptr, + p->tx_skb[NUM_TX_BUFF / 2 + i] ? 'V' : ' ', + p->tx_desc[NUM_TX_BUFF / 2 + i].ctrl, + p->tx_desc[NUM_TX_BUFF / 2 + i].data_len); + + printk("** EMAC %s RX BDs **\n" + " rx_slot = %d flags = 0x%lx rx_skb_size = %d rx_sync_size = %d\n" + " rx_sg_skb = 0x%p\n", + p->ofdev->node->full_name, + p->rx_slot, p->commac.flags, p->rx_skb_size, + p->rx_sync_size, p->rx_sg_skb); + for (i = 0; i < NUM_RX_BUFF / 2; ++i) + printk + ("bd[%2d] 0x%08x %c 0x%04x %4u - bd[%2d] 0x%08x %c 0x%04x %4u\n", + i, p->rx_desc[i].data_ptr, p->rx_skb[i] ? 'V' : ' ', + p->rx_desc[i].ctrl, p->rx_desc[i].data_len, + NUM_RX_BUFF / 2 + i, + p->rx_desc[NUM_RX_BUFF / 2 + i].data_ptr, + p->rx_skb[NUM_RX_BUFF / 2 + i] ? 'V' : ' ', + p->rx_desc[NUM_RX_BUFF / 2 + i].ctrl, + p->rx_desc[NUM_RX_BUFF / 2 + i].data_len); +} + +static void emac_mac_dump(struct emac_instance *dev) +{ + struct emac_regs __iomem *p = dev->emacp; + + printk("** EMAC %s registers **\n" + "MR0 = 0x%08x MR1 = 0x%08x TMR0 = 0x%08x TMR1 = 0x%08x\n" + "RMR = 0x%08x ISR = 0x%08x ISER = 0x%08x\n" + "IAR = %04x%08x VTPID = 0x%04x VTCI = 0x%04x\n" + "IAHT: 0x%04x 0x%04x 0x%04x 0x%04x " + "GAHT: 0x%04x 0x%04x 0x%04x 0x%04x\n" + "LSA = %04x%08x IPGVR = 0x%04x\n" + "STACR = 0x%08x TRTR = 0x%08x RWMR = 0x%08x\n" + "OCTX = 0x%08x OCRX = 0x%08x IPCR = 0x%08x\n", + dev->ofdev->node->full_name, in_be32(&p->mr0), in_be32(&p->mr1), + in_be32(&p->tmr0), in_be32(&p->tmr1), + in_be32(&p->rmr), in_be32(&p->isr), in_be32(&p->iser), + in_be32(&p->iahr), in_be32(&p->ialr), in_be32(&p->vtpid), + in_be32(&p->vtci), + in_be32(&p->iaht1), in_be32(&p->iaht2), in_be32(&p->iaht3), + in_be32(&p->iaht4), + in_be32(&p->gaht1), in_be32(&p->gaht2), in_be32(&p->gaht3), + in_be32(&p->gaht4), + in_be32(&p->lsah), in_be32(&p->lsal), in_be32(&p->ipgvr), + in_be32(&p->stacr), in_be32(&p->trtr), in_be32(&p->rwmr), + in_be32(&p->octx), in_be32(&p->ocrx), in_be32(&p->ipcr) + ); + + emac_desc_dump(dev); +} + +static void emac_mal_dump(struct mal_instance *mal) +{ + int i; + + printk("** MAL %s Registers **\n" + "CFG = 0x%08x ESR = 0x%08x IER = 0x%08x\n" + "TX|CASR = 0x%08x CARR = 0x%08x EOBISR = 0x%08x DEIR = 0x%08x\n" + "RX|CASR = 0x%08x CARR = 0x%08x EOBISR = 0x%08x DEIR = 0x%08x\n", + mal->ofdev->node->full_name, + get_mal_dcrn(mal, MAL_CFG), get_mal_dcrn(mal, MAL_ESR), + get_mal_dcrn(mal, MAL_IER), + get_mal_dcrn(mal, MAL_TXCASR), get_mal_dcrn(mal, MAL_TXCARR), + get_mal_dcrn(mal, MAL_TXEOBISR), get_mal_dcrn(mal, MAL_TXDEIR), + get_mal_dcrn(mal, MAL_RXCASR), get_mal_dcrn(mal, MAL_RXCARR), + get_mal_dcrn(mal, MAL_RXEOBISR), get_mal_dcrn(mal, MAL_RXDEIR) + ); + + printk("TX|"); + for (i = 0; i < mal->num_tx_chans; ++i) { + if (i && !(i % 4)) + printk("\n "); + printk("CTP%d = 0x%08x ", i, get_mal_dcrn(mal, MAL_TXCTPR(i))); + } + printk("\nRX|"); + for (i = 0; i < mal->num_rx_chans; ++i) { + if (i && !(i % 4)) + printk("\n "); + printk("CTP%d = 0x%08x ", i, get_mal_dcrn(mal, MAL_RXCTPR(i))); + } + printk("\n "); + for (i = 0; i < mal->num_rx_chans; ++i) { + u32 r = get_mal_dcrn(mal, MAL_RCBS(i)); + if (i && !(i % 3)) + printk("\n "); + printk("RCBS%d = 0x%08x (%d) ", i, r, r * 16); + } + printk("\n"); +} + +static struct emac_instance *__emacs[4]; +static struct mal_instance *__mals[1]; + +void emac_dbg_register(struct emac_instance *dev) +{ + unsigned long flags; + int i; + + spin_lock_irqsave(&emac_dbg_lock, flags); + for (i = 0; i < ARRAY_SIZE(__emacs); i++) + if (__emacs[i] == NULL) { + __emacs[i] = dev; + break; + } + spin_unlock_irqrestore(&emac_dbg_lock, flags); +} + +void emac_dbg_unregister(struct emac_instance *dev) +{ + unsigned long flags; + int i; + + spin_lock_irqsave(&emac_dbg_lock, flags); + for (i = 0; i < ARRAY_SIZE(__emacs); i++) + if (__emacs[i] == dev) { + __emacs[i] = NULL; + break; + } + spin_unlock_irqrestore(&emac_dbg_lock, flags); +} + +void mal_dbg_register(struct mal_instance *mal) +{ + unsigned long flags; + int i; + + spin_lock_irqsave(&emac_dbg_lock, flags); + for (i = 0; i < ARRAY_SIZE(__mals); i++) + if (__mals[i] == NULL) { + __mals[i] = mal; + break; + } + spin_unlock_irqrestore(&emac_dbg_lock, flags); +} + +void mal_dbg_unregister(struct mal_instance *mal) +{ + unsigned long flags; + int i; + + spin_lock_irqsave(&emac_dbg_lock, flags); + for (i = 0; i < ARRAY_SIZE(__mals); i++) + if (__mals[i] == mal) { + __mals[i] = NULL; + break; + } + spin_unlock_irqrestore(&emac_dbg_lock, flags); +} + +void emac_dbg_dump_all(void) +{ + unsigned int i; + unsigned long flags; + + spin_lock_irqsave(&emac_dbg_lock, flags); + + for (i = 0; i < ARRAY_SIZE(__mals); ++i) + if (__mals[i]) + emac_mal_dump(__mals[i]); + + for (i = 0; i < ARRAY_SIZE(__emacs); ++i) + if (__emacs[i]) + emac_mac_dump(__emacs[i]); + + spin_unlock_irqrestore(&emac_dbg_lock, flags); +} + +#if defined(CONFIG_MAGIC_SYSRQ) +static void emac_sysrq_handler(int key, struct tty_struct *tty) +{ + emac_dbg_dump_all(); +} + +static struct sysrq_key_op emac_sysrq_op = { + .handler = emac_sysrq_handler, + .help_msg = "emaC", + .action_msg = "Show EMAC(s) status", +}; + +int __init emac_init_debug(void) +{ + return register_sysrq_key('c', &emac_sysrq_op); +} + +void __exit emac_fini_debug(void) +{ + unregister_sysrq_key('c', &emac_sysrq_op); +} + +#else +int __init emac_init_debug(void) +{ + return 0; +} +void __exit emac_fini_debug(void) +{ +} +#endif /* CONFIG_MAGIC_SYSRQ */ diff --git a/drivers/net/ibm_newemac/debug.h b/drivers/net/ibm_newemac/debug.h new file mode 100644 index 000000000000..1dd2dcbc157f --- /dev/null +++ b/drivers/net/ibm_newemac/debug.h @@ -0,0 +1,78 @@ +/* + * drivers/net/ibm_newemac/debug.h + * + * Driver for PowerPC 4xx on-chip ethernet controller, debug print routines. + * + * Copyright (c) 2004, 2005 Zultys Technologies + * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#ifndef __IBM_NEWEMAC_DEBUG_H +#define __IBM_NEWEMAC_DEBUG_H + +#include <linux/init.h> + +#include "core.h" + +#if defined(CONFIG_IBM_NEW_EMAC_DEBUG) + +struct emac_instance; +struct mal_instance; + +extern void emac_dbg_register(struct emac_instance *dev); +extern void emac_dbg_unregister(struct emac_instance *dev); +extern void mal_dbg_register(struct mal_instance *mal); +extern void mal_dbg_unregister(struct mal_instance *mal); +extern int emac_init_debug(void) __init; +extern void emac_fini_debug(void) __exit; +extern void emac_dbg_dump_all(void); + +# define DBG_LEVEL 1 + +#else + +# define emac_dbg_register(x) do { } while(0) +# define emac_dbg_unregister(x) do { } while(0) +# define mal_dbg_register(x) do { } while(0) +# define mal_dbg_unregister(x) do { } while(0) +# define emac_init_debug() do { } while(0) +# define emac_fini_debug() do { } while(0) +# define emac_dbg_dump_all() do { } while(0) + +# define DBG_LEVEL 0 + +#endif + +#define EMAC_DBG(dev, name, fmt, arg...) \ + printk(KERN_DEBUG #name "%s: " fmt, dev->ofdev->node->full_name, ## arg) + +#if DBG_LEVEL > 0 +# define DBG(d,f,x...) EMAC_DBG(d, emac, f, ##x) +# define MAL_DBG(d,f,x...) EMAC_DBG(d, mal, f, ##x) +# define ZMII_DBG(d,f,x...) EMAC_DBG(d, zmii, f, ##x) +# define RGMII_DBG(d,f,x...) EMAC_DBG(d, rgmii, f, ##x) +# define NL "\n" +#else +# define DBG(f,x...) ((void)0) +# define MAL_DBG(d,f,x...) ((void)0) +# define ZMII_DBG(d,f,x...) ((void)0) +# define RGMII_DBG(d,f,x...) ((void)0) +#endif +#if DBG_LEVEL > 1 +# define DBG2(d,f,x...) DBG(d,f, ##x) +# define MAL_DBG2(d,f,x...) MAL_DBG(d,f, ##x) +# define ZMII_DBG2(d,f,x...) ZMII_DBG(d,f, ##x) +# define RGMII_DBG2(d,f,x...) RGMII_DBG(d,f, ##x) +#else +# define DBG2(f,x...) ((void)0) +# define MAL_DBG2(d,f,x...) ((void)0) +# define ZMII_DBG2(d,f,x...) ((void)0) +# define RGMII_DBG2(d,f,x...) ((void)0) +#endif + +#endif /* __IBM_NEWEMAC_DEBUG_H */ diff --git a/drivers/net/ibm_newemac/emac.h b/drivers/net/ibm_newemac/emac.h new file mode 100644 index 000000000000..bef92efeeadc --- /dev/null +++ b/drivers/net/ibm_newemac/emac.h @@ -0,0 +1,268 @@ +/* + * drivers/net/ibm_newemac/emac.h + * + * Register definitions for PowerPC 4xx on-chip ethernet contoller + * + * Copyright (c) 2004, 2005 Zultys Technologies. + * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> + * + * Based on original work by + * Matt Porter <mporter@kernel.crashing.org> + * Armin Kuster <akuster@mvista.com> + * Copyright 2002-2004 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#ifndef __IBM_NEWEMAC_H +#define __IBM_NEWEMAC_H + +#include <linux/types.h> + +/* EMAC registers Write Access rules */ +struct emac_regs { + u32 mr0; /* special */ + u32 mr1; /* Reset */ + u32 tmr0; /* special */ + u32 tmr1; /* special */ + u32 rmr; /* Reset */ + u32 isr; /* Always */ + u32 iser; /* Reset */ + u32 iahr; /* Reset, R, T */ + u32 ialr; /* Reset, R, T */ + u32 vtpid; /* Reset, R, T */ + u32 vtci; /* Reset, R, T */ + u32 ptr; /* Reset, T */ + u32 iaht1; /* Reset, R */ + u32 iaht2; /* Reset, R */ + u32 iaht3; /* Reset, R */ + u32 iaht4; /* Reset, R */ + u32 gaht1; /* Reset, R */ + u32 gaht2; /* Reset, R */ + u32 gaht3; /* Reset, R */ + u32 gaht4; /* Reset, R */ + u32 lsah; + u32 lsal; + u32 ipgvr; /* Reset, T */ + u32 stacr; /* special */ + u32 trtr; /* special */ + u32 rwmr; /* Reset */ + u32 octx; + u32 ocrx; + u32 ipcr; +}; + +/* + * PHY mode settings (EMAC <-> ZMII/RGMII bridge <-> PHY) + */ +#define PHY_MODE_NA 0 +#define PHY_MODE_MII 1 +#define PHY_MODE_RMII 2 +#define PHY_MODE_SMII 3 +#define PHY_MODE_RGMII 4 +#define PHY_MODE_TBI 5 +#define PHY_MODE_GMII 6 +#define PHY_MODE_RTBI 7 +#define PHY_MODE_SGMII 8 + + +#define EMAC_ETHTOOL_REGS_VER 0 +#define EMAC_ETHTOOL_REGS_SIZE (sizeof(struct emac_regs) - sizeof(u32)) +#define EMAC4_ETHTOOL_REGS_VER 1 +#define EMAC4_ETHTOOL_REGS_SIZE sizeof(struct emac_regs) + +/* EMACx_MR0 */ +#define EMAC_MR0_RXI 0x80000000 +#define EMAC_MR0_TXI 0x40000000 +#define EMAC_MR0_SRST 0x20000000 +#define EMAC_MR0_TXE 0x10000000 +#define EMAC_MR0_RXE 0x08000000 +#define EMAC_MR0_WKE 0x04000000 + +/* EMACx_MR1 */ +#define EMAC_MR1_FDE 0x80000000 +#define EMAC_MR1_ILE 0x40000000 +#define EMAC_MR1_VLE 0x20000000 +#define EMAC_MR1_EIFC 0x10000000 +#define EMAC_MR1_APP 0x08000000 +#define EMAC_MR1_IST 0x01000000 + +#define EMAC_MR1_MF_MASK 0x00c00000 +#define EMAC_MR1_MF_10 0x00000000 +#define EMAC_MR1_MF_100 0x00400000 +#define EMAC_MR1_MF_1000 0x00800000 +#define EMAC_MR1_MF_1000GPCS 0x00c00000 +#define EMAC_MR1_MF_IPPA(id) (((id) & 0x1f) << 6) + +#define EMAC_MR1_RFS_4K 0x00300000 +#define EMAC_MR1_RFS_16K 0x00000000 +#define EMAC_MR1_TFS_2K 0x00080000 +#define EMAC_MR1_TR0_MULT 0x00008000 +#define EMAC_MR1_JPSM 0x00000000 +#define EMAC_MR1_MWSW_001 0x00000000 +#define EMAC_MR1_BASE(opb) (EMAC_MR1_TFS_2K | EMAC_MR1_TR0_MULT) + + +#define EMAC4_MR1_RFS_2K 0x00100000 +#define EMAC4_MR1_RFS_4K 0x00180000 +#define EMAC4_MR1_RFS_16K 0x00280000 +#define EMAC4_MR1_TFS_2K 0x00020000 +#define EMAC4_MR1_TFS_4K 0x00030000 +#define EMAC4_MR1_TR 0x00008000 +#define EMAC4_MR1_MWSW_001 0x00001000 +#define EMAC4_MR1_JPSM 0x00000800 +#define EMAC4_MR1_OBCI_MASK 0x00000038 +#define EMAC4_MR1_OBCI_50 0x00000000 +#define EMAC4_MR1_OBCI_66 0x00000008 +#define EMAC4_MR1_OBCI_83 0x00000010 +#define EMAC4_MR1_OBCI_100 0x00000018 +#define EMAC4_MR1_OBCI_100P 0x00000020 +#define EMAC4_MR1_OBCI(freq) ((freq) <= 50 ? EMAC4_MR1_OBCI_50 : \ + (freq) <= 66 ? EMAC4_MR1_OBCI_66 : \ + (freq) <= 83 ? EMAC4_MR1_OBCI_83 : \ + (freq) <= 100 ? EMAC4_MR1_OBCI_100 : \ + EMAC4_MR1_OBCI_100P) + +/* EMACx_TMR0 */ +#define EMAC_TMR0_GNP 0x80000000 +#define EMAC_TMR0_DEFAULT 0x00000000 +#define EMAC4_TMR0_TFAE_2_32 0x00000001 +#define EMAC4_TMR0_TFAE_4_64 0x00000002 +#define EMAC4_TMR0_TFAE_8_128 0x00000003 +#define EMAC4_TMR0_TFAE_16_256 0x00000004 +#define EMAC4_TMR0_TFAE_32_512 0x00000005 +#define EMAC4_TMR0_TFAE_64_1024 0x00000006 +#define EMAC4_TMR0_TFAE_128_2048 0x00000007 +#define EMAC4_TMR0_DEFAULT EMAC4_TMR0_TFAE_2_32 +#define EMAC_TMR0_XMIT (EMAC_TMR0_GNP | EMAC_TMR0_DEFAULT) +#define EMAC4_TMR0_XMIT (EMAC_TMR0_GNP | EMAC4_TMR0_DEFAULT) + +/* EMACx_TMR1 */ + +#define EMAC_TMR1(l,h) (((l) << 27) | (((h) & 0xff) << 16)) +#define EMAC4_TMR1(l,h) (((l) << 27) | (((h) & 0x3ff) << 14)) + +/* EMACx_RMR */ +#define EMAC_RMR_SP 0x80000000 +#define EMAC_RMR_SFCS 0x40000000 +#define EMAC_RMR_RRP 0x20000000 +#define EMAC_RMR_RFP 0x10000000 +#define EMAC_RMR_ROP 0x08000000 +#define EMAC_RMR_RPIR 0x04000000 +#define EMAC_RMR_PPP 0x02000000 +#define EMAC_RMR_PME 0x01000000 +#define EMAC_RMR_PMME 0x00800000 +#define EMAC_RMR_IAE 0x00400000 +#define EMAC_RMR_MIAE 0x00200000 +#define EMAC_RMR_BAE 0x00100000 +#define EMAC_RMR_MAE 0x00080000 +#define EMAC_RMR_BASE 0x00000000 +#define EMAC4_RMR_RFAF_2_32 0x00000001 +#define EMAC4_RMR_RFAF_4_64 0x00000002 +#define EMAC4_RMR_RFAF_8_128 0x00000003 +#define EMAC4_RMR_RFAF_16_256 0x00000004 +#define EMAC4_RMR_RFAF_32_512 0x00000005 +#define EMAC4_RMR_RFAF_64_1024 0x00000006 +#define EMAC4_RMR_RFAF_128_2048 0x00000007 +#define EMAC4_RMR_BASE EMAC4_RMR_RFAF_128_2048 + +/* EMACx_ISR & EMACx_ISER */ +#define EMAC4_ISR_TXPE 0x20000000 +#define EMAC4_ISR_RXPE 0x10000000 +#define EMAC4_ISR_TXUE 0x08000000 +#define EMAC4_ISR_RXOE 0x04000000 +#define EMAC_ISR_OVR 0x02000000 +#define EMAC_ISR_PP 0x01000000 +#define EMAC_ISR_BP 0x00800000 +#define EMAC_ISR_RP 0x00400000 +#define EMAC_ISR_SE 0x00200000 +#define EMAC_ISR_ALE 0x00100000 +#define EMAC_ISR_BFCS 0x00080000 +#define EMAC_ISR_PTLE 0x00040000 +#define EMAC_ISR_ORE 0x00020000 +#define EMAC_ISR_IRE 0x00010000 +#define EMAC_ISR_SQE 0x00000080 +#define EMAC_ISR_TE 0x00000040 +#define EMAC_ISR_MOS 0x00000002 +#define EMAC_ISR_MOF 0x00000001 + +/* EMACx_STACR */ +#define EMAC_STACR_PHYD_MASK 0xffff +#define EMAC_STACR_PHYD_SHIFT 16 +#define EMAC_STACR_OC 0x00008000 +#define EMAC_STACR_PHYE 0x00004000 +#define EMAC_STACR_STAC_MASK 0x00003000 +#define EMAC_STACR_STAC_READ 0x00001000 +#define EMAC_STACR_STAC_WRITE 0x00002000 +#define EMAC_STACR_OPBC_MASK 0x00000C00 +#define EMAC_STACR_OPBC_50 0x00000000 +#define EMAC_STACR_OPBC_66 0x00000400 +#define EMAC_STACR_OPBC_83 0x00000800 +#define EMAC_STACR_OPBC_100 0x00000C00 +#define EMAC_STACR_OPBC(freq) ((freq) <= 50 ? EMAC_STACR_OPBC_50 : \ + (freq) <= 66 ? EMAC_STACR_OPBC_66 : \ + (freq) <= 83 ? EMAC_STACR_OPBC_83 : EMAC_STACR_OPBC_100) +#define EMAC_STACR_BASE(opb) EMAC_STACR_OPBC(opb) +#define EMAC4_STACR_BASE(opb) 0x00000000 +#define EMAC_STACR_PCDA_MASK 0x1f +#define EMAC_STACR_PCDA_SHIFT 5 +#define EMAC_STACR_PRA_MASK 0x1f +#define EMACX_STACR_STAC_MASK 0x00003800 +#define EMACX_STACR_STAC_READ 0x00001000 +#define EMACX_STACR_STAC_WRITE 0x00000800 +#define EMACX_STACR_STAC_IND_ADDR 0x00002000 +#define EMACX_STACR_STAC_IND_READ 0x00003800 +#define EMACX_STACR_STAC_IND_READINC 0x00003000 +#define EMACX_STACR_STAC_IND_WRITE 0x00002800 + + +/* EMACx_TRTR */ +#define EMAC_TRTR_SHIFT_EMAC4 27 +#define EMAC_TRTR_SHIFT 24 + +/* EMAC specific TX descriptor control fields (write access) */ +#define EMAC_TX_CTRL_GFCS 0x0200 +#define EMAC_TX_CTRL_GP 0x0100 +#define EMAC_TX_CTRL_ISA 0x0080 +#define EMAC_TX_CTRL_RSA 0x0040 +#define EMAC_TX_CTRL_IVT 0x0020 +#define EMAC_TX_CTRL_RVT 0x0010 +#define EMAC_TX_CTRL_TAH_CSUM 0x000e + +/* EMAC specific TX descriptor status fields (read access) */ +#define EMAC_TX_ST_BFCS 0x0200 +#define EMAC_TX_ST_LCS 0x0080 +#define EMAC_TX_ST_ED 0x0040 +#define EMAC_TX_ST_EC 0x0020 +#define EMAC_TX_ST_LC 0x0010 +#define EMAC_TX_ST_MC 0x0008 +#define EMAC_TX_ST_SC 0x0004 +#define EMAC_TX_ST_UR 0x0002 +#define EMAC_TX_ST_SQE 0x0001 +#define EMAC_IS_BAD_TX (EMAC_TX_ST_LCS | EMAC_TX_ST_ED | \ + EMAC_TX_ST_EC | EMAC_TX_ST_LC | \ + EMAC_TX_ST_MC | EMAC_TX_ST_UR) +#define EMAC_IS_BAD_TX_TAH (EMAC_TX_ST_LCS | EMAC_TX_ST_ED | \ + EMAC_TX_ST_EC | EMAC_TX_ST_LC) + +/* EMAC specific RX descriptor status fields (read access) */ +#define EMAC_RX_ST_OE 0x0200 +#define EMAC_RX_ST_PP 0x0100 +#define EMAC_RX_ST_BP 0x0080 +#define EMAC_RX_ST_RP 0x0040 +#define EMAC_RX_ST_SE 0x0020 +#define EMAC_RX_ST_AE 0x0010 +#define EMAC_RX_ST_BFCS 0x0008 +#define EMAC_RX_ST_PTL 0x0004 +#define EMAC_RX_ST_ORE 0x0002 +#define EMAC_RX_ST_IRE 0x0001 +#define EMAC_RX_TAH_BAD_CSUM 0x0003 +#define EMAC_BAD_RX_MASK (EMAC_RX_ST_OE | EMAC_RX_ST_BP | \ + EMAC_RX_ST_RP | EMAC_RX_ST_SE | \ + EMAC_RX_ST_AE | EMAC_RX_ST_BFCS | \ + EMAC_RX_ST_PTL | EMAC_RX_ST_ORE | \ + EMAC_RX_ST_IRE ) +#endif /* __IBM_NEWEMAC_H */ diff --git a/drivers/net/ibm_newemac/mal.c b/drivers/net/ibm_newemac/mal.c new file mode 100644 index 000000000000..c4335b7d308c --- /dev/null +++ b/drivers/net/ibm_newemac/mal.c @@ -0,0 +1,728 @@ +/* + * drivers/net/ibm_newemac/mal.c + * + * Memory Access Layer (MAL) support + * + * Copyright (c) 2004, 2005 Zultys Technologies. + * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> + * + * Based on original work by + * Benjamin Herrenschmidt <benh@kernel.crashing.org>, + * David Gibson <hermes@gibson.dropbear.id.au>, + * + * Armin Kuster <akuster@mvista.com> + * Copyright 2002 MontaVista Softare Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/delay.h> + +#include "core.h" + +static int mal_count; + +int __devinit mal_register_commac(struct mal_instance *mal, + struct mal_commac *commac) +{ + unsigned long flags; + + spin_lock_irqsave(&mal->lock, flags); + + MAL_DBG(mal, "reg(%08x, %08x)" NL, + commac->tx_chan_mask, commac->rx_chan_mask); + + /* Don't let multiple commacs claim the same channel(s) */ + if ((mal->tx_chan_mask & commac->tx_chan_mask) || + (mal->rx_chan_mask & commac->rx_chan_mask)) { + spin_unlock_irqrestore(&mal->lock, flags); + printk(KERN_WARNING "mal%d: COMMAC channels conflict!\n", + mal->index); + return -EBUSY; + } + + mal->tx_chan_mask |= commac->tx_chan_mask; + mal->rx_chan_mask |= commac->rx_chan_mask; + list_add(&commac->list, &mal->list); + + spin_unlock_irqrestore(&mal->lock, flags); + + return 0; +} + +void __devexit mal_unregister_commac(struct mal_instance *mal, + struct mal_commac *commac) +{ + unsigned long flags; + + spin_lock_irqsave(&mal->lock, flags); + + MAL_DBG(mal, "unreg(%08x, %08x)" NL, + commac->tx_chan_mask, commac->rx_chan_mask); + + mal->tx_chan_mask &= ~commac->tx_chan_mask; + mal->rx_chan_mask &= ~commac->rx_chan_mask; + list_del_init(&commac->list); + + spin_unlock_irqrestore(&mal->lock, flags); +} + +int mal_set_rcbs(struct mal_instance *mal, int channel, unsigned long size) +{ + BUG_ON(channel < 0 || channel >= mal->num_rx_chans || + size > MAL_MAX_RX_SIZE); + + MAL_DBG(mal, "set_rbcs(%d, %lu)" NL, channel, size); + + if (size & 0xf) { + printk(KERN_WARNING + "mal%d: incorrect RX size %lu for the channel %d\n", + mal->index, size, channel); + return -EINVAL; + } + + set_mal_dcrn(mal, MAL_RCBS(channel), size >> 4); + return 0; +} + +int mal_tx_bd_offset(struct mal_instance *mal, int channel) +{ + BUG_ON(channel < 0 || channel >= mal->num_tx_chans); + + return channel * NUM_TX_BUFF; +} + +int mal_rx_bd_offset(struct mal_instance *mal, int channel) +{ + BUG_ON(channel < 0 || channel >= mal->num_rx_chans); + return mal->num_tx_chans * NUM_TX_BUFF + channel * NUM_RX_BUFF; +} + +void mal_enable_tx_channel(struct mal_instance *mal, int channel) +{ + unsigned long flags; + + spin_lock_irqsave(&mal->lock, flags); + + MAL_DBG(mal, "enable_tx(%d)" NL, channel); + + set_mal_dcrn(mal, MAL_TXCASR, + get_mal_dcrn(mal, MAL_TXCASR) | MAL_CHAN_MASK(channel)); + + spin_unlock_irqrestore(&mal->lock, flags); +} + +void mal_disable_tx_channel(struct mal_instance *mal, int channel) +{ + set_mal_dcrn(mal, MAL_TXCARR, MAL_CHAN_MASK(channel)); + + MAL_DBG(mal, "disable_tx(%d)" NL, channel); +} + +void mal_enable_rx_channel(struct mal_instance *mal, int channel) +{ + unsigned long flags; + + spin_lock_irqsave(&mal->lock, flags); + + MAL_DBG(mal, "enable_rx(%d)" NL, channel); + + set_mal_dcrn(mal, MAL_RXCASR, + get_mal_dcrn(mal, MAL_RXCASR) | MAL_CHAN_MASK(channel)); + + spin_unlock_irqrestore(&mal->lock, flags); +} + +void mal_disable_rx_channel(struct mal_instance *mal, int channel) +{ + set_mal_dcrn(mal, MAL_RXCARR, MAL_CHAN_MASK(channel)); + + MAL_DBG(mal, "disable_rx(%d)" NL, channel); +} + +void mal_poll_add(struct mal_instance *mal, struct mal_commac *commac) +{ + unsigned long flags; + + spin_lock_irqsave(&mal->lock, flags); + + MAL_DBG(mal, "poll_add(%p)" NL, commac); + + /* starts disabled */ + set_bit(MAL_COMMAC_POLL_DISABLED, &commac->flags); + + list_add_tail(&commac->poll_list, &mal->poll_list); + + spin_unlock_irqrestore(&mal->lock, flags); +} + +void mal_poll_del(struct mal_instance *mal, struct mal_commac *commac) +{ + unsigned long flags; + + spin_lock_irqsave(&mal->lock, flags); + + MAL_DBG(mal, "poll_del(%p)" NL, commac); + + list_del(&commac->poll_list); + + spin_unlock_irqrestore(&mal->lock, flags); +} + +/* synchronized by mal_poll() */ +static inline void mal_enable_eob_irq(struct mal_instance *mal) +{ + MAL_DBG2(mal, "enable_irq" NL); + + // XXX might want to cache MAL_CFG as the DCR read can be slooooow + set_mal_dcrn(mal, MAL_CFG, get_mal_dcrn(mal, MAL_CFG) | MAL_CFG_EOPIE); +} + +/* synchronized by __LINK_STATE_RX_SCHED bit in ndev->state */ +static inline void mal_disable_eob_irq(struct mal_instance *mal) +{ + // XXX might want to cache MAL_CFG as the DCR read can be slooooow + set_mal_dcrn(mal, MAL_CFG, get_mal_dcrn(mal, MAL_CFG) & ~MAL_CFG_EOPIE); + + MAL_DBG2(mal, "disable_irq" NL); +} + +static irqreturn_t mal_serr(int irq, void *dev_instance) +{ + struct mal_instance *mal = dev_instance; + + u32 esr = get_mal_dcrn(mal, MAL_ESR); + + /* Clear the error status register */ + set_mal_dcrn(mal, MAL_ESR, esr); + + MAL_DBG(mal, "SERR %08x" NL, esr); + + if (esr & MAL_ESR_EVB) { + if (esr & MAL_ESR_DE) { + /* We ignore Descriptor error, + * TXDE or RXDE interrupt will be generated anyway. + */ + return IRQ_HANDLED; + } + + if (esr & MAL_ESR_PEIN) { + /* PLB error, it's probably buggy hardware or + * incorrect physical address in BD (i.e. bug) + */ + if (net_ratelimit()) + printk(KERN_ERR + "mal%d: system error, " + "PLB (ESR = 0x%08x)\n", + mal->index, esr); + return IRQ_HANDLED; + } + + /* OPB error, it's probably buggy hardware or incorrect + * EBC setup + */ + if (net_ratelimit()) + printk(KERN_ERR + "mal%d: system error, OPB (ESR = 0x%08x)\n", + mal->index, esr); + } + return IRQ_HANDLED; +} + +static inline void mal_schedule_poll(struct mal_instance *mal) +{ + if (likely(netif_rx_schedule_prep(&mal->poll_dev))) { + MAL_DBG2(mal, "schedule_poll" NL); + mal_disable_eob_irq(mal); + __netif_rx_schedule(&mal->poll_dev); + } else + MAL_DBG2(mal, "already in poll" NL); +} + +static irqreturn_t mal_txeob(int irq, void *dev_instance) +{ + struct mal_instance *mal = dev_instance; + + u32 r = get_mal_dcrn(mal, MAL_TXEOBISR); + + MAL_DBG2(mal, "txeob %08x" NL, r); + + mal_schedule_poll(mal); + set_mal_dcrn(mal, MAL_TXEOBISR, r); + + return IRQ_HANDLED; +} + +static irqreturn_t mal_rxeob(int irq, void *dev_instance) +{ + struct mal_instance *mal = dev_instance; + + u32 r = get_mal_dcrn(mal, MAL_RXEOBISR); + + MAL_DBG2(mal, "rxeob %08x" NL, r); + + mal_schedule_poll(mal); + set_mal_dcrn(mal, MAL_RXEOBISR, r); + + return IRQ_HANDLED; +} + +static irqreturn_t mal_txde(int irq, void *dev_instance) +{ + struct mal_instance *mal = dev_instance; + + u32 deir = get_mal_dcrn(mal, MAL_TXDEIR); + set_mal_dcrn(mal, MAL_TXDEIR, deir); + + MAL_DBG(mal, "txde %08x" NL, deir); + + if (net_ratelimit()) + printk(KERN_ERR + "mal%d: TX descriptor error (TXDEIR = 0x%08x)\n", + mal->index, deir); + + return IRQ_HANDLED; +} + +static irqreturn_t mal_rxde(int irq, void *dev_instance) +{ + struct mal_instance *mal = dev_instance; + struct list_head *l; + + u32 deir = get_mal_dcrn(mal, MAL_RXDEIR); + + MAL_DBG(mal, "rxde %08x" NL, deir); + + list_for_each(l, &mal->list) { + struct mal_commac *mc = list_entry(l, struct mal_commac, list); + if (deir & mc->rx_chan_mask) { + set_bit(MAL_COMMAC_RX_STOPPED, &mc->flags); + mc->ops->rxde(mc->dev); + } + } + + mal_schedule_poll(mal); + set_mal_dcrn(mal, MAL_RXDEIR, deir); + + return IRQ_HANDLED; +} + +void mal_poll_disable(struct mal_instance *mal, struct mal_commac *commac) +{ + /* Spinlock-type semantics: only one caller disable poll at a time */ + while (test_and_set_bit(MAL_COMMAC_POLL_DISABLED, &commac->flags)) + msleep(1); + + /* Synchronize with the MAL NAPI poller. */ + while (test_bit(__LINK_STATE_RX_SCHED, &mal->poll_dev.state)) + msleep(1); +} + +void mal_poll_enable(struct mal_instance *mal, struct mal_commac *commac) +{ + smp_wmb(); + clear_bit(MAL_COMMAC_POLL_DISABLED, &commac->flags); + + // XXX might want to kick a poll now... +} + +static int mal_poll(struct net_device *ndev, int *budget) +{ + struct mal_instance *mal = netdev_priv(ndev); + struct list_head *l; + int rx_work_limit = min(ndev->quota, *budget), received = 0, done; + unsigned long flags; + + MAL_DBG2(mal, "poll(%d) %d ->" NL, *budget, + rx_work_limit); + again: + /* Process TX skbs */ + list_for_each(l, &mal->poll_list) { + struct mal_commac *mc = + list_entry(l, struct mal_commac, poll_list); + mc->ops->poll_tx(mc->dev); + } + + /* Process RX skbs. + * + * We _might_ need something more smart here to enforce polling + * fairness. + */ + list_for_each(l, &mal->poll_list) { + struct mal_commac *mc = + list_entry(l, struct mal_commac, poll_list); + int n; + if (unlikely(test_bit(MAL_COMMAC_POLL_DISABLED, &mc->flags))) + continue; + n = mc->ops->poll_rx(mc->dev, rx_work_limit); + if (n) { + received += n; + rx_work_limit -= n; + if (rx_work_limit <= 0) { + done = 0; + // XXX What if this is the last one ? + goto more_work; + } + } + } + + /* We need to disable IRQs to protect from RXDE IRQ here */ + spin_lock_irqsave(&mal->lock, flags); + __netif_rx_complete(ndev); + mal_enable_eob_irq(mal); + spin_unlock_irqrestore(&mal->lock, flags); + + done = 1; + + /* Check for "rotting" packet(s) */ + list_for_each(l, &mal->poll_list) { + struct mal_commac *mc = + list_entry(l, struct mal_commac, poll_list); + if (unlikely(test_bit(MAL_COMMAC_POLL_DISABLED, &mc->flags))) + continue; + if (unlikely(mc->ops->peek_rx(mc->dev) || + test_bit(MAL_COMMAC_RX_STOPPED, &mc->flags))) { + MAL_DBG2(mal, "rotting packet" NL); + if (netif_rx_reschedule(ndev, received)) + mal_disable_eob_irq(mal); + else + MAL_DBG2(mal, "already in poll list" NL); + + if (rx_work_limit > 0) + goto again; + else + goto more_work; + } + mc->ops->poll_tx(mc->dev); + } + + more_work: + ndev->quota -= received; + *budget -= received; + + MAL_DBG2(mal, "poll() %d <- %d" NL, *budget, + done ? 0 : 1); + + return done ? 0 : 1; +} + +static void mal_reset(struct mal_instance *mal) +{ + int n = 10; + + MAL_DBG(mal, "reset" NL); + + set_mal_dcrn(mal, MAL_CFG, MAL_CFG_SR); + + /* Wait for reset to complete (1 system clock) */ + while ((get_mal_dcrn(mal, MAL_CFG) & MAL_CFG_SR) && n) + --n; + + if (unlikely(!n)) + printk(KERN_ERR "mal%d: reset timeout\n", mal->index); +} + +int mal_get_regs_len(struct mal_instance *mal) +{ + return sizeof(struct emac_ethtool_regs_subhdr) + + sizeof(struct mal_regs); +} + +void *mal_dump_regs(struct mal_instance *mal, void *buf) +{ + struct emac_ethtool_regs_subhdr *hdr = buf; + struct mal_regs *regs = (struct mal_regs *)(hdr + 1); + int i; + + hdr->version = mal->version; + hdr->index = mal->index; + + regs->tx_count = mal->num_tx_chans; + regs->rx_count = mal->num_rx_chans; + + regs->cfg = get_mal_dcrn(mal, MAL_CFG); + regs->esr = get_mal_dcrn(mal, MAL_ESR); + regs->ier = get_mal_dcrn(mal, MAL_IER); + regs->tx_casr = get_mal_dcrn(mal, MAL_TXCASR); + regs->tx_carr = get_mal_dcrn(mal, MAL_TXCARR); + regs->tx_eobisr = get_mal_dcrn(mal, MAL_TXEOBISR); + regs->tx_deir = get_mal_dcrn(mal, MAL_TXDEIR); + regs->rx_casr = get_mal_dcrn(mal, MAL_RXCASR); + regs->rx_carr = get_mal_dcrn(mal, MAL_RXCARR); + regs->rx_eobisr = get_mal_dcrn(mal, MAL_RXEOBISR); + regs->rx_deir = get_mal_dcrn(mal, MAL_RXDEIR); + + for (i = 0; i < regs->tx_count; ++i) + regs->tx_ctpr[i] = get_mal_dcrn(mal, MAL_TXCTPR(i)); + + for (i = 0; i < regs->rx_count; ++i) { + regs->rx_ctpr[i] = get_mal_dcrn(mal, MAL_RXCTPR(i)); + regs->rcbs[i] = get_mal_dcrn(mal, MAL_RCBS(i)); + } + return regs + 1; +} + +static int __devinit mal_probe(struct of_device *ofdev, + const struct of_device_id *match) +{ + struct mal_instance *mal; + int err = 0, i, bd_size; + int index = mal_count++; + const u32 *prop; + u32 cfg; + + mal = kzalloc(sizeof(struct mal_instance), GFP_KERNEL); + if (!mal) { + printk(KERN_ERR + "mal%d: out of memory allocating MAL structure!\n", + index); + return -ENOMEM; + } + mal->index = index; + mal->ofdev = ofdev; + mal->version = of_device_is_compatible(ofdev->node, "ibm,mcmal2") ? 2 : 1; + + MAL_DBG(mal, "probe" NL); + + prop = of_get_property(ofdev->node, "num-tx-chans", NULL); + if (prop == NULL) { + printk(KERN_ERR + "mal%d: can't find MAL num-tx-chans property!\n", + index); + err = -ENODEV; + goto fail; + } + mal->num_tx_chans = prop[0]; + + prop = of_get_property(ofdev->node, "num-rx-chans", NULL); + if (prop == NULL) { + printk(KERN_ERR + "mal%d: can't find MAL num-rx-chans property!\n", + index); + err = -ENODEV; + goto fail; + } + mal->num_rx_chans = prop[0]; + + mal->dcr_base = dcr_resource_start(ofdev->node, 0); + if (mal->dcr_base == 0) { + printk(KERN_ERR + "mal%d: can't find DCR resource!\n", index); + err = -ENODEV; + goto fail; + } + mal->dcr_host = dcr_map(ofdev->node, mal->dcr_base, 0x100); + if (!DCR_MAP_OK(mal->dcr_host)) { + printk(KERN_ERR + "mal%d: failed to map DCRs !\n", index); + err = -ENODEV; + goto fail; + } + + mal->txeob_irq = irq_of_parse_and_map(ofdev->node, 0); + mal->rxeob_irq = irq_of_parse_and_map(ofdev->node, 1); + mal->serr_irq = irq_of_parse_and_map(ofdev->node, 2); + mal->txde_irq = irq_of_parse_and_map(ofdev->node, 3); + mal->rxde_irq = irq_of_parse_and_map(ofdev->node, 4); + if (mal->txeob_irq == NO_IRQ || mal->rxeob_irq == NO_IRQ || + mal->serr_irq == NO_IRQ || mal->txde_irq == NO_IRQ || + mal->rxde_irq == NO_IRQ) { + printk(KERN_ERR + "mal%d: failed to map interrupts !\n", index); + err = -ENODEV; + goto fail_unmap; + } + + INIT_LIST_HEAD(&mal->poll_list); + set_bit(__LINK_STATE_START, &mal->poll_dev.state); + mal->poll_dev.weight = CONFIG_IBM_NEW_EMAC_POLL_WEIGHT; + mal->poll_dev.poll = mal_poll; + mal->poll_dev.priv = mal; + atomic_set(&mal->poll_dev.refcnt, 1); + INIT_LIST_HEAD(&mal->list); + spin_lock_init(&mal->lock); + + /* Load power-on reset defaults */ + mal_reset(mal); + + /* Set the MAL configuration register */ + cfg = (mal->version == 2) ? MAL2_CFG_DEFAULT : MAL1_CFG_DEFAULT; + cfg |= MAL_CFG_PLBB | MAL_CFG_OPBBL | MAL_CFG_LEA; + + /* Current Axon is not happy with priority being non-0, it can + * deadlock, fix it up here + */ + if (of_device_is_compatible(ofdev->node, "ibm,mcmal-axon")) + cfg &= ~(MAL2_CFG_RPP_10 | MAL2_CFG_WPP_10); + + /* Apply configuration */ + set_mal_dcrn(mal, MAL_CFG, cfg); + + /* Allocate space for BD rings */ + BUG_ON(mal->num_tx_chans <= 0 || mal->num_tx_chans > 32); + BUG_ON(mal->num_rx_chans <= 0 || mal->num_rx_chans > 32); + + bd_size = sizeof(struct mal_descriptor) * + (NUM_TX_BUFF * mal->num_tx_chans + + NUM_RX_BUFF * mal->num_rx_chans); + mal->bd_virt = + dma_alloc_coherent(&ofdev->dev, bd_size, &mal->bd_dma, + GFP_KERNEL); + if (mal->bd_virt == NULL) { + printk(KERN_ERR + "mal%d: out of memory allocating RX/TX descriptors!\n", + index); + err = -ENOMEM; + goto fail_unmap; + } + memset(mal->bd_virt, 0, bd_size); + + for (i = 0; i < mal->num_tx_chans; ++i) + set_mal_dcrn(mal, MAL_TXCTPR(i), mal->bd_dma + + sizeof(struct mal_descriptor) * + mal_tx_bd_offset(mal, i)); + + for (i = 0; i < mal->num_rx_chans; ++i) + set_mal_dcrn(mal, MAL_RXCTPR(i), mal->bd_dma + + sizeof(struct mal_descriptor) * + mal_rx_bd_offset(mal, i)); + + err = request_irq(mal->serr_irq, mal_serr, 0, "MAL SERR", mal); + if (err) + goto fail2; + err = request_irq(mal->txde_irq, mal_txde, 0, "MAL TX DE", mal); + if (err) + goto fail3; + err = request_irq(mal->txeob_irq, mal_txeob, 0, "MAL TX EOB", mal); + if (err) + goto fail4; + err = request_irq(mal->rxde_irq, mal_rxde, 0, "MAL RX DE", mal); + if (err) + goto fail5; + err = request_irq(mal->rxeob_irq, mal_rxeob, 0, "MAL RX EOB", mal); + if (err) + goto fail6; + + /* Enable all MAL SERR interrupt sources */ + if (mal->version == 2) + set_mal_dcrn(mal, MAL_IER, MAL2_IER_EVENTS); + else + set_mal_dcrn(mal, MAL_IER, MAL1_IER_EVENTS); + + /* Enable EOB interrupt */ + mal_enable_eob_irq(mal); + + printk(KERN_INFO + "MAL v%d %s, %d TX channels, %d RX channels\n", + mal->version, ofdev->node->full_name, + mal->num_tx_chans, mal->num_rx_chans); + + /* Advertise this instance to the rest of the world */ + wmb(); + dev_set_drvdata(&ofdev->dev, mal); + + mal_dbg_register(mal); + + return 0; + + fail6: + free_irq(mal->rxde_irq, mal); + fail5: + free_irq(mal->txeob_irq, mal); + fail4: + free_irq(mal->txde_irq, mal); + fail3: + free_irq(mal->serr_irq, mal); + fail2: + dma_free_coherent(&ofdev->dev, bd_size, mal->bd_virt, mal->bd_dma); + fail_unmap: + dcr_unmap(mal->dcr_host, mal->dcr_base, 0x100); + fail: + kfree(mal); + + return err; +} + +static int __devexit mal_remove(struct of_device *ofdev) +{ + struct mal_instance *mal = dev_get_drvdata(&ofdev->dev); + + MAL_DBG(mal, "remove" NL); + + /* Syncronize with scheduled polling, + stolen from net/core/dev.c:dev_close() + */ + clear_bit(__LINK_STATE_START, &mal->poll_dev.state); + netif_poll_disable(&mal->poll_dev); + + if (!list_empty(&mal->list)) { + /* This is *very* bad */ + printk(KERN_EMERG + "mal%d: commac list is not empty on remove!\n", + mal->index); + WARN_ON(1); + } + + dev_set_drvdata(&ofdev->dev, NULL); + + free_irq(mal->serr_irq, mal); + free_irq(mal->txde_irq, mal); + free_irq(mal->txeob_irq, mal); + free_irq(mal->rxde_irq, mal); + free_irq(mal->rxeob_irq, mal); + + mal_reset(mal); + + mal_dbg_unregister(mal); + + dma_free_coherent(&ofdev->dev, + sizeof(struct mal_descriptor) * + (NUM_TX_BUFF * mal->num_tx_chans + + NUM_RX_BUFF * mal->num_rx_chans), mal->bd_virt, + mal->bd_dma); + kfree(mal); + + return 0; +} + +static struct of_device_id mal_platform_match[] = +{ + { + .compatible = "ibm,mcmal", + }, + { + .compatible = "ibm,mcmal2", + }, + /* Backward compat */ + { + .type = "mcmal-dma", + .compatible = "ibm,mcmal", + }, + { + .type = "mcmal-dma", + .compatible = "ibm,mcmal2", + }, + {}, +}; + +static struct of_platform_driver mal_of_driver = { + .name = "mcmal", + .match_table = mal_platform_match, + + .probe = mal_probe, + .remove = mal_remove, +}; + +int __init mal_init(void) +{ + return of_register_platform_driver(&mal_of_driver); +} + +void mal_exit(void) +{ + of_unregister_platform_driver(&mal_of_driver); +} diff --git a/drivers/net/ibm_newemac/mal.h b/drivers/net/ibm_newemac/mal.h new file mode 100644 index 000000000000..57b69dc32e9d --- /dev/null +++ b/drivers/net/ibm_newemac/mal.h @@ -0,0 +1,276 @@ +/* + * drivers/net/ibm_newemac/mal.h + * + * Memory Access Layer (MAL) support + * + * Copyright (c) 2004, 2005 Zultys Technologies. + * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> + * + * Based on original work by + * Armin Kuster <akuster@mvista.com> + * Copyright 2002 MontaVista Softare Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#ifndef __IBM_NEWEMAC_MAL_H +#define __IBM_NEWEMAC_MAL_H + +/* + * There are some variations on the MAL, we express them in this driver as + * MAL Version 1 and 2 though that doesn't match any IBM terminology. + * + * We call MAL 1 the version in 405GP, 405GPR, 405EP, 440EP, 440GR and + * NP405H. + * + * We call MAL 2 the version in 440GP, 440GX, 440SP, 440SPE and Axon + * + * The driver expects a "version" property in the emac node containing + * a number 1 or 2. New device-trees for EMAC capable platforms are thus + * required to include that when porting to arch/powerpc. + */ + +/* MALx DCR registers */ +#define MAL_CFG 0x00 +#define MAL_CFG_SR 0x80000000 +#define MAL_CFG_PLBB 0x00004000 +#define MAL_CFG_OPBBL 0x00000080 +#define MAL_CFG_EOPIE 0x00000004 +#define MAL_CFG_LEA 0x00000002 +#define MAL_CFG_SD 0x00000001 + +/* MAL V1 CFG bits */ +#define MAL1_CFG_PLBP_MASK 0x00c00000 +#define MAL1_CFG_PLBP_10 0x00800000 +#define MAL1_CFG_GA 0x00200000 +#define MAL1_CFG_OA 0x00100000 +#define MAL1_CFG_PLBLE 0x00080000 +#define MAL1_CFG_PLBT_MASK 0x00078000 +#define MAL1_CFG_DEFAULT (MAL1_CFG_PLBP_10 | MAL1_CFG_PLBT_MASK) + +/* MAL V2 CFG bits */ +#define MAL2_CFG_RPP_MASK 0x00c00000 +#define MAL2_CFG_RPP_10 0x00800000 +#define MAL2_CFG_RMBS_MASK 0x00300000 +#define MAL2_CFG_WPP_MASK 0x000c0000 +#define MAL2_CFG_WPP_10 0x00080000 +#define MAL2_CFG_WMBS_MASK 0x00030000 +#define MAL2_CFG_PLBLE 0x00008000 +#define MAL2_CFG_DEFAULT (MAL2_CFG_RMBS_MASK | MAL2_CFG_WMBS_MASK | \ + MAL2_CFG_RPP_10 | MAL2_CFG_WPP_10) + +#define MAL_ESR 0x01 +#define MAL_ESR_EVB 0x80000000 +#define MAL_ESR_CIDT 0x40000000 +#define MAL_ESR_CID_MASK 0x3e000000 +#define MAL_ESR_CID_SHIFT 25 +#define MAL_ESR_DE 0x00100000 +#define MAL_ESR_OTE 0x00040000 +#define MAL_ESR_OSE 0x00020000 +#define MAL_ESR_PEIN 0x00010000 +#define MAL_ESR_DEI 0x00000010 +#define MAL_ESR_OTEI 0x00000004 +#define MAL_ESR_OSEI 0x00000002 +#define MAL_ESR_PBEI 0x00000001 + +/* MAL V1 ESR bits */ +#define MAL1_ESR_ONE 0x00080000 +#define MAL1_ESR_ONEI 0x00000008 + +/* MAL V2 ESR bits */ +#define MAL2_ESR_PTE 0x00800000 +#define MAL2_ESR_PRE 0x00400000 +#define MAL2_ESR_PWE 0x00200000 +#define MAL2_ESR_PTEI 0x00000080 +#define MAL2_ESR_PREI 0x00000040 +#define MAL2_ESR_PWEI 0x00000020 + + +#define MAL_IER 0x02 +#define MAL_IER_DE 0x00000010 +#define MAL_IER_OTE 0x00000004 +#define MAL_IER_OE 0x00000002 +#define MAL_IER_PE 0x00000001 +/* MAL V1 IER bits */ +#define MAL1_IER_NWE 0x00000008 +#define MAL1_IER_SOC_EVENTS MAL1_IER_NWE +#define MAL1_IER_EVENTS (MAL1_IER_SOC_EVENTS | MAL_IER_OTE | \ + MAL_IER_OTE | MAL_IER_OE | MAL_IER_PE) + +/* MAL V2 IER bits */ +#define MAL2_IER_PT 0x00000080 +#define MAL2_IER_PRE 0x00000040 +#define MAL2_IER_PWE 0x00000020 +#define MAL2_IER_SOC_EVENTS (MAL2_IER_PT | MAL2_IER_PRE | MAL2_IER_PWE) +#define MAL2_IER_EVENTS (MAL2_IER_SOC_EVENTS | MAL_IER_OTE | \ + MAL_IER_OTE | MAL_IER_OE | MAL_IER_PE) + + +#define MAL_TXCASR 0x04 +#define MAL_TXCARR 0x05 +#define MAL_TXEOBISR 0x06 +#define MAL_TXDEIR 0x07 +#define MAL_RXCASR 0x10 +#define MAL_RXCARR 0x11 +#define MAL_RXEOBISR 0x12 +#define MAL_RXDEIR 0x13 +#define MAL_TXCTPR(n) ((n) + 0x20) +#define MAL_RXCTPR(n) ((n) + 0x40) +#define MAL_RCBS(n) ((n) + 0x60) + +/* In reality MAL can handle TX buffers up to 4095 bytes long, + * but this isn't a good round number :) --ebs + */ +#define MAL_MAX_TX_SIZE 4080 +#define MAL_MAX_RX_SIZE 4080 + +static inline int mal_rx_size(int len) +{ + len = (len + 0xf) & ~0xf; + return len > MAL_MAX_RX_SIZE ? MAL_MAX_RX_SIZE : len; +} + +static inline int mal_tx_chunks(int len) +{ + return (len + MAL_MAX_TX_SIZE - 1) / MAL_MAX_TX_SIZE; +} + +#define MAL_CHAN_MASK(n) (0x80000000 >> (n)) + +/* MAL Buffer Descriptor structure */ +struct mal_descriptor { + u16 ctrl; /* MAL / Commac status control bits */ + u16 data_len; /* Max length is 4K-1 (12 bits) */ + u32 data_ptr; /* pointer to actual data buffer */ +}; + +/* the following defines are for the MadMAL status and control registers. */ +/* MADMAL transmit and receive status/control bits */ +#define MAL_RX_CTRL_EMPTY 0x8000 +#define MAL_RX_CTRL_WRAP 0x4000 +#define MAL_RX_CTRL_CM 0x2000 +#define MAL_RX_CTRL_LAST 0x1000 +#define MAL_RX_CTRL_FIRST 0x0800 +#define MAL_RX_CTRL_INTR 0x0400 +#define MAL_RX_CTRL_SINGLE (MAL_RX_CTRL_LAST | MAL_RX_CTRL_FIRST) +#define MAL_IS_SINGLE_RX(ctrl) (((ctrl) & MAL_RX_CTRL_SINGLE) == MAL_RX_CTRL_SINGLE) + +#define MAL_TX_CTRL_READY 0x8000 +#define MAL_TX_CTRL_WRAP 0x4000 +#define MAL_TX_CTRL_CM 0x2000 +#define MAL_TX_CTRL_LAST 0x1000 +#define MAL_TX_CTRL_INTR 0x0400 + +struct mal_commac_ops { + void (*poll_tx) (void *dev); + int (*poll_rx) (void *dev, int budget); + int (*peek_rx) (void *dev); + void (*rxde) (void *dev); +}; + +struct mal_commac { + struct mal_commac_ops *ops; + void *dev; + struct list_head poll_list; + long flags; +#define MAL_COMMAC_RX_STOPPED 0 +#define MAL_COMMAC_POLL_DISABLED 1 + u32 tx_chan_mask; + u32 rx_chan_mask; + struct list_head list; +}; + +struct mal_instance { + int version; + int dcr_base; + dcr_host_t dcr_host; + + int num_tx_chans; /* Number of TX channels */ + int num_rx_chans; /* Number of RX channels */ + int txeob_irq; /* TX End Of Buffer IRQ */ + int rxeob_irq; /* RX End Of Buffer IRQ */ + int txde_irq; /* TX Descriptor Error IRQ */ + int rxde_irq; /* RX Descriptor Error IRQ */ + int serr_irq; /* MAL System Error IRQ */ + + struct list_head poll_list; + struct net_device poll_dev; + + struct list_head list; + u32 tx_chan_mask; + u32 rx_chan_mask; + + dma_addr_t bd_dma; + struct mal_descriptor *bd_virt; + + struct of_device *ofdev; + int index; + spinlock_t lock; +}; + +static inline u32 get_mal_dcrn(struct mal_instance *mal, int reg) +{ + return dcr_read(mal->dcr_host, mal->dcr_base + reg); +} + +static inline void set_mal_dcrn(struct mal_instance *mal, int reg, u32 val) +{ + dcr_write(mal->dcr_host, mal->dcr_base + reg, val); +} + +/* Register MAL devices */ +int mal_init(void); +void mal_exit(void); + +int mal_register_commac(struct mal_instance *mal, + struct mal_commac *commac); +void mal_unregister_commac(struct mal_instance *mal, + struct mal_commac *commac); +int mal_set_rcbs(struct mal_instance *mal, int channel, unsigned long size); + +/* Returns BD ring offset for a particular channel + (in 'struct mal_descriptor' elements) +*/ +int mal_tx_bd_offset(struct mal_instance *mal, int channel); +int mal_rx_bd_offset(struct mal_instance *mal, int channel); + +void mal_enable_tx_channel(struct mal_instance *mal, int channel); +void mal_disable_tx_channel(struct mal_instance *mal, int channel); +void mal_enable_rx_channel(struct mal_instance *mal, int channel); +void mal_disable_rx_channel(struct mal_instance *mal, int channel); + +void mal_poll_disable(struct mal_instance *mal, struct mal_commac *commac); +void mal_poll_enable(struct mal_instance *mal, struct mal_commac *commac); + +/* Add/remove EMAC to/from MAL polling list */ +void mal_poll_add(struct mal_instance *mal, struct mal_commac *commac); +void mal_poll_del(struct mal_instance *mal, struct mal_commac *commac); + +/* Ethtool MAL registers */ +struct mal_regs { + u32 tx_count; + u32 rx_count; + + u32 cfg; + u32 esr; + u32 ier; + u32 tx_casr; + u32 tx_carr; + u32 tx_eobisr; + u32 tx_deir; + u32 rx_casr; + u32 rx_carr; + u32 rx_eobisr; + u32 rx_deir; + u32 tx_ctpr[32]; + u32 rx_ctpr[32]; + u32 rcbs[32]; +}; + +int mal_get_regs_len(struct mal_instance *mal); +void *mal_dump_regs(struct mal_instance *mal, void *buf); + +#endif /* __IBM_NEWEMAC_MAL_H */ diff --git a/drivers/net/ibm_newemac/phy.c b/drivers/net/ibm_newemac/phy.c new file mode 100644 index 000000000000..aa1f0ddf1e3e --- /dev/null +++ b/drivers/net/ibm_newemac/phy.c @@ -0,0 +1,373 @@ +/* + * drivers/net/ibm_newemac/phy.c + * + * Driver for PowerPC 4xx on-chip ethernet controller, PHY support. + * Borrowed from sungem_phy.c, though I only kept the generic MII + * driver for now. + * + * This file should be shared with other drivers or eventually + * merged as the "low level" part of miilib + * + * (c) 2003, Benjamin Herrenscmidt (benh@kernel.crashing.org) + * (c) 2004-2005, Eugene Surovegin <ebs@ebshome.net> + * + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/netdevice.h> +#include <linux/mii.h> +#include <linux/ethtool.h> +#include <linux/delay.h> + +#include "emac.h" +#include "phy.h" + +static inline int phy_read(struct mii_phy *phy, int reg) +{ + return phy->mdio_read(phy->dev, phy->address, reg); +} + +static inline void phy_write(struct mii_phy *phy, int reg, int val) +{ + phy->mdio_write(phy->dev, phy->address, reg, val); +} + +int emac_mii_reset_phy(struct mii_phy *phy) +{ + int val; + int limit = 10000; + + val = phy_read(phy, MII_BMCR); + val &= ~(BMCR_ISOLATE | BMCR_ANENABLE); + val |= BMCR_RESET; + phy_write(phy, MII_BMCR, val); + + udelay(300); + + while (limit--) { + val = phy_read(phy, MII_BMCR); + if (val >= 0 && (val & BMCR_RESET) == 0) + break; + udelay(10); + } + if ((val & BMCR_ISOLATE) && limit > 0) + phy_write(phy, MII_BMCR, val & ~BMCR_ISOLATE); + + return limit <= 0; +} + +static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise) +{ + int ctl, adv; + + phy->autoneg = AUTONEG_ENABLE; + phy->speed = SPEED_10; + phy->duplex = DUPLEX_HALF; + phy->pause = phy->asym_pause = 0; + phy->advertising = advertise; + + ctl = phy_read(phy, MII_BMCR); + if (ctl < 0) + return ctl; + ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE); + + /* First clear the PHY */ + phy_write(phy, MII_BMCR, ctl); + + /* Setup standard advertise */ + adv = phy_read(phy, MII_ADVERTISE); + if (adv < 0) + return adv; + adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP | + ADVERTISE_PAUSE_ASYM); + if (advertise & ADVERTISED_10baseT_Half) + adv |= ADVERTISE_10HALF; + if (advertise & ADVERTISED_10baseT_Full) + adv |= ADVERTISE_10FULL; + if (advertise & ADVERTISED_100baseT_Half) + adv |= ADVERTISE_100HALF; + if (advertise & ADVERTISED_100baseT_Full) + adv |= ADVERTISE_100FULL; + if (advertise & ADVERTISED_Pause) + adv |= ADVERTISE_PAUSE_CAP; + if (advertise & ADVERTISED_Asym_Pause) + adv |= ADVERTISE_PAUSE_ASYM; + phy_write(phy, MII_ADVERTISE, adv); + + if (phy->features & + (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) { + adv = phy_read(phy, MII_CTRL1000); + if (adv < 0) + return adv; + adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF); + if (advertise & ADVERTISED_1000baseT_Full) + adv |= ADVERTISE_1000FULL; + if (advertise & ADVERTISED_1000baseT_Half) + adv |= ADVERTISE_1000HALF; + phy_write(phy, MII_CTRL1000, adv); + } + + /* Start/Restart aneg */ + ctl = phy_read(phy, MII_BMCR); + ctl |= (BMCR_ANENABLE | BMCR_ANRESTART); + phy_write(phy, MII_BMCR, ctl); + + return 0; +} + +static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd) +{ + int ctl; + + phy->autoneg = AUTONEG_DISABLE; + phy->speed = speed; + phy->duplex = fd; + phy->pause = phy->asym_pause = 0; + + ctl = phy_read(phy, MII_BMCR); + if (ctl < 0) + return ctl; + ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE); + + /* First clear the PHY */ + phy_write(phy, MII_BMCR, ctl | BMCR_RESET); + + /* Select speed & duplex */ + switch (speed) { + case SPEED_10: + break; + case SPEED_100: + ctl |= BMCR_SPEED100; + break; + case SPEED_1000: + ctl |= BMCR_SPEED1000; + break; + default: + return -EINVAL; + } + if (fd == DUPLEX_FULL) + ctl |= BMCR_FULLDPLX; + phy_write(phy, MII_BMCR, ctl); + + return 0; +} + +static int genmii_poll_link(struct mii_phy *phy) +{ + int status; + + /* Clear latched value with dummy read */ + phy_read(phy, MII_BMSR); + status = phy_read(phy, MII_BMSR); + if (status < 0 || (status & BMSR_LSTATUS) == 0) + return 0; + if (phy->autoneg == AUTONEG_ENABLE && !(status & BMSR_ANEGCOMPLETE)) + return 0; + return 1; +} + +static int genmii_read_link(struct mii_phy *phy) +{ + if (phy->autoneg == AUTONEG_ENABLE) { + int glpa = 0; + int lpa = phy_read(phy, MII_LPA) & phy_read(phy, MII_ADVERTISE); + if (lpa < 0) + return lpa; + + if (phy->features & + (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) { + int adv = phy_read(phy, MII_CTRL1000); + glpa = phy_read(phy, MII_STAT1000); + + if (glpa < 0 || adv < 0) + return adv; + + glpa &= adv << 2; + } + + phy->speed = SPEED_10; + phy->duplex = DUPLEX_HALF; + phy->pause = phy->asym_pause = 0; + + if (glpa & (LPA_1000FULL | LPA_1000HALF)) { + phy->speed = SPEED_1000; + if (glpa & LPA_1000FULL) + phy->duplex = DUPLEX_FULL; + } else if (lpa & (LPA_100FULL | LPA_100HALF)) { + phy->speed = SPEED_100; + if (lpa & LPA_100FULL) + phy->duplex = DUPLEX_FULL; + } else if (lpa & LPA_10FULL) + phy->duplex = DUPLEX_FULL; + + if (phy->duplex == DUPLEX_FULL) { + phy->pause = lpa & LPA_PAUSE_CAP ? 1 : 0; + phy->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0; + } + } else { + int bmcr = phy_read(phy, MII_BMCR); + if (bmcr < 0) + return bmcr; + + if (bmcr & BMCR_FULLDPLX) + phy->duplex = DUPLEX_FULL; + else + phy->duplex = DUPLEX_HALF; + if (bmcr & BMCR_SPEED1000) + phy->speed = SPEED_1000; + else if (bmcr & BMCR_SPEED100) + phy->speed = SPEED_100; + else + phy->speed = SPEED_10; + + phy->pause = phy->asym_pause = 0; + } + return 0; +} + +/* Generic implementation for most 10/100/1000 PHYs */ +static struct mii_phy_ops generic_phy_ops = { + .setup_aneg = genmii_setup_aneg, + .setup_forced = genmii_setup_forced, + .poll_link = genmii_poll_link, + .read_link = genmii_read_link +}; + +static struct mii_phy_def genmii_phy_def = { + .phy_id = 0x00000000, + .phy_id_mask = 0x00000000, + .name = "Generic MII", + .ops = &generic_phy_ops +}; + +/* CIS8201 */ +#define MII_CIS8201_10BTCSR 0x16 +#define TENBTCSR_ECHO_DISABLE 0x2000 +#define MII_CIS8201_EPCR 0x17 +#define EPCR_MODE_MASK 0x3000 +#define EPCR_GMII_MODE 0x0000 +#define EPCR_RGMII_MODE 0x1000 +#define EPCR_TBI_MODE 0x2000 +#define EPCR_RTBI_MODE 0x3000 +#define MII_CIS8201_ACSR 0x1c +#define ACSR_PIN_PRIO_SELECT 0x0004 + +static int cis8201_init(struct mii_phy *phy) +{ + int epcr; + + epcr = phy_read(phy, MII_CIS8201_EPCR); + if (epcr < 0) + return epcr; + + epcr &= ~EPCR_MODE_MASK; + + switch (phy->mode) { + case PHY_MODE_TBI: + epcr |= EPCR_TBI_MODE; + break; + case PHY_MODE_RTBI: + epcr |= EPCR_RTBI_MODE; + break; + case PHY_MODE_GMII: + epcr |= EPCR_GMII_MODE; + break; + case PHY_MODE_RGMII: + default: + epcr |= EPCR_RGMII_MODE; + } + + phy_write(phy, MII_CIS8201_EPCR, epcr); + + /* MII regs override strap pins */ + phy_write(phy, MII_CIS8201_ACSR, + phy_read(phy, MII_CIS8201_ACSR) | ACSR_PIN_PRIO_SELECT); + + /* Disable TX_EN -> CRS echo mode, otherwise 10/HDX doesn't work */ + phy_write(phy, MII_CIS8201_10BTCSR, + phy_read(phy, MII_CIS8201_10BTCSR) | TENBTCSR_ECHO_DISABLE); + + return 0; +} + +static struct mii_phy_ops cis8201_phy_ops = { + .init = cis8201_init, + .setup_aneg = genmii_setup_aneg, + .setup_forced = genmii_setup_forced, + .poll_link = genmii_poll_link, + .read_link = genmii_read_link +}; + +static struct mii_phy_def cis8201_phy_def = { + .phy_id = 0x000fc410, + .phy_id_mask = 0x000ffff0, + .name = "CIS8201 Gigabit Ethernet", + .ops = &cis8201_phy_ops +}; + +static struct mii_phy_def *mii_phy_table[] = { + &cis8201_phy_def, + &genmii_phy_def, + NULL +}; + +int emac_mii_phy_probe(struct mii_phy *phy, int address) +{ + struct mii_phy_def *def; + int i; + u32 id; + + phy->autoneg = AUTONEG_DISABLE; + phy->advertising = 0; + phy->address = address; + phy->speed = SPEED_10; + phy->duplex = DUPLEX_HALF; + phy->pause = phy->asym_pause = 0; + + /* Take PHY out of isolate mode and reset it. */ + if (emac_mii_reset_phy(phy)) + return -ENODEV; + + /* Read ID and find matching entry */ + id = (phy_read(phy, MII_PHYSID1) << 16) | phy_read(phy, MII_PHYSID2); + for (i = 0; (def = mii_phy_table[i]) != NULL; i++) + if ((id & def->phy_id_mask) == def->phy_id) + break; + /* Should never be NULL (we have a generic entry), but... */ + if (!def) + return -ENODEV; + + phy->def = def; + + /* Determine PHY features if needed */ + phy->features = def->features; + if (!phy->features) { + u16 bmsr = phy_read(phy, MII_BMSR); + if (bmsr & BMSR_ANEGCAPABLE) + phy->features |= SUPPORTED_Autoneg; + if (bmsr & BMSR_10HALF) + phy->features |= SUPPORTED_10baseT_Half; + if (bmsr & BMSR_10FULL) + phy->features |= SUPPORTED_10baseT_Full; + if (bmsr & BMSR_100HALF) + phy->features |= SUPPORTED_100baseT_Half; + if (bmsr & BMSR_100FULL) + phy->features |= SUPPORTED_100baseT_Full; + if (bmsr & BMSR_ESTATEN) { + u16 esr = phy_read(phy, MII_ESTATUS); + if (esr & ESTATUS_1000_TFULL) + phy->features |= SUPPORTED_1000baseT_Full; + if (esr & ESTATUS_1000_THALF) + phy->features |= SUPPORTED_1000baseT_Half; + } + phy->features |= SUPPORTED_MII; + } + + /* Setup default advertising */ + phy->advertising = phy->features; + + return 0; +} + +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ibm_newemac/phy.h b/drivers/net/ibm_newemac/phy.h new file mode 100644 index 000000000000..6feca26afedb --- /dev/null +++ b/drivers/net/ibm_newemac/phy.h @@ -0,0 +1,80 @@ +/* + * drivers/net/ibm_newemac/phy.h + * + * Driver for PowerPC 4xx on-chip ethernet controller, PHY support + * + * Benjamin Herrenschmidt <benh@kernel.crashing.org> + * February 2003 + * + * Minor additions by Eugene Surovegin <ebs@ebshome.net>, 2004 + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This file basically duplicates sungem_phy.{c,h} with different PHYs + * supported. I'm looking into merging that in a single mii layer more + * flexible than mii.c + */ + +#ifndef __IBM_NEWEMAC_PHY_H +#define __IBM_NEWEMAC_PHY_H + +struct mii_phy; + +/* Operations supported by any kind of PHY */ +struct mii_phy_ops { + int (*init) (struct mii_phy * phy); + int (*suspend) (struct mii_phy * phy, int wol_options); + int (*setup_aneg) (struct mii_phy * phy, u32 advertise); + int (*setup_forced) (struct mii_phy * phy, int speed, int fd); + int (*poll_link) (struct mii_phy * phy); + int (*read_link) (struct mii_phy * phy); +}; + +/* Structure used to statically define an mii/gii based PHY */ +struct mii_phy_def { + u32 phy_id; /* Concatenated ID1 << 16 | ID2 */ + u32 phy_id_mask; /* Significant bits */ + u32 features; /* Ethtool SUPPORTED_* defines or + 0 for autodetect */ + int magic_aneg; /* Autoneg does all speed test for us */ + const char *name; + const struct mii_phy_ops *ops; +}; + +/* An instance of a PHY, partially borrowed from mii_if_info */ +struct mii_phy { + struct mii_phy_def *def; + u32 advertising; /* Ethtool ADVERTISED_* defines */ + u32 features; /* Copied from mii_phy_def.features + or determined automaticaly */ + int address; /* PHY address */ + int mode; /* PHY mode */ + + /* 1: autoneg enabled, 0: disabled */ + int autoneg; + + /* forced speed & duplex (no autoneg) + * partner speed & duplex & pause (autoneg) + */ + int speed; + int duplex; + int pause; + int asym_pause; + + /* Provided by host chip */ + struct net_device *dev; + int (*mdio_read) (struct net_device * dev, int addr, int reg); + void (*mdio_write) (struct net_device * dev, int addr, int reg, + int val); +}; + +/* Pass in a struct mii_phy with dev, mdio_read and mdio_write + * filled, the remaining fields will be filled on return + */ +int emac_mii_phy_probe(struct mii_phy *phy, int address); +int emac_mii_reset_phy(struct mii_phy *phy); + +#endif /* __IBM_NEWEMAC_PHY_H */ diff --git a/drivers/net/ibm_newemac/rgmii.c b/drivers/net/ibm_newemac/rgmii.c new file mode 100644 index 000000000000..bcd7fc639c40 --- /dev/null +++ b/drivers/net/ibm_newemac/rgmii.c @@ -0,0 +1,323 @@ +/* + * drivers/net/ibm_newemac/rgmii.c + * + * Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support. + * + * Copyright (c) 2004, 2005 Zultys Technologies. + * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> + * + * Based on original work by + * Matt Porter <mporter@kernel.crashing.org> + * Copyright 2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include <linux/kernel.h> +#include <linux/ethtool.h> +#include <asm/io.h> + +#include "emac.h" +#include "debug.h" + +// XXX FIXME: Axon seems to support a subset of the RGMII, we +// thus need to take that into account and possibly change some +// of the bit settings below that don't seem to quite match the +// AXON spec + +/* RGMIIx_FER */ +#define RGMII_FER_MASK(idx) (0x7 << ((idx) * 4)) +#define RGMII_FER_RTBI(idx) (0x4 << ((idx) * 4)) +#define RGMII_FER_RGMII(idx) (0x5 << ((idx) * 4)) +#define RGMII_FER_TBI(idx) (0x6 << ((idx) * 4)) +#define RGMII_FER_GMII(idx) (0x7 << ((idx) * 4)) + +/* RGMIIx_SSR */ +#define RGMII_SSR_MASK(idx) (0x7 << ((idx) * 8)) +#define RGMII_SSR_100(idx) (0x2 << ((idx) * 8)) +#define RGMII_SSR_1000(idx) (0x4 << ((idx) * 8)) + +/* RGMII bridge supports only GMII/TBI and RGMII/RTBI PHYs */ +static inline int rgmii_valid_mode(int phy_mode) +{ + return phy_mode == PHY_MODE_GMII || + phy_mode == PHY_MODE_RGMII || + phy_mode == PHY_MODE_TBI || + phy_mode == PHY_MODE_RTBI; +} + +static inline const char *rgmii_mode_name(int mode) +{ + switch (mode) { + case PHY_MODE_RGMII: + return "RGMII"; + case PHY_MODE_TBI: + return "TBI"; + case PHY_MODE_GMII: + return "GMII"; + case PHY_MODE_RTBI: + return "RTBI"; + default: + BUG(); + } +} + +static inline u32 rgmii_mode_mask(int mode, int input) +{ + switch (mode) { + case PHY_MODE_RGMII: + return RGMII_FER_RGMII(input); + case PHY_MODE_TBI: + return RGMII_FER_TBI(input); + case PHY_MODE_GMII: + return RGMII_FER_GMII(input); + case PHY_MODE_RTBI: + return RGMII_FER_RTBI(input); + default: + BUG(); + } +} + +int __devinit rgmii_attach(struct of_device *ofdev, int input, int mode) +{ + struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev); + struct rgmii_regs *p = dev->base; + + RGMII_DBG(dev, "attach(%d)" NL, input); + + /* Check if we need to attach to a RGMII */ + if (input < 0 || !rgmii_valid_mode(mode)) { + printk(KERN_ERR "%s: unsupported settings !\n", + ofdev->node->full_name); + return -ENODEV; + } + + mutex_lock(&dev->lock); + + /* Enable this input */ + out_be32(&p->fer, in_be32(&p->fer) | rgmii_mode_mask(mode, input)); + + printk(KERN_NOTICE "%s: input %d in %s mode\n", + ofdev->node->full_name, input, rgmii_mode_name(mode)); + + ++dev->users; + + mutex_unlock(&dev->lock); + + return 0; +} + +void rgmii_set_speed(struct of_device *ofdev, int input, int speed) +{ + struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev); + struct rgmii_regs *p = dev->base; + u32 ssr; + + mutex_lock(&dev->lock); + + ssr = in_be32(&p->ssr) & ~RGMII_SSR_MASK(input); + + RGMII_DBG(dev, "speed(%d, %d)" NL, input, speed); + + if (speed == SPEED_1000) + ssr |= RGMII_SSR_1000(input); + else if (speed == SPEED_100) + ssr |= RGMII_SSR_100(input); + + out_be32(&p->ssr, ssr); + + mutex_unlock(&dev->lock); +} + +void rgmii_get_mdio(struct of_device *ofdev, int input) +{ + struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev); + struct rgmii_regs *p = dev->base; + u32 fer; + + RGMII_DBG2(dev, "get_mdio(%d)" NL, input); + + if (dev->type != RGMII_AXON) + return; + + mutex_lock(&dev->lock); + + fer = in_be32(&p->fer); + fer |= 0x00080000u >> input; + out_be32(&p->fer, fer); + (void)in_be32(&p->fer); + + DBG2(dev, " fer = 0x%08x\n", fer); +} + +void rgmii_put_mdio(struct of_device *ofdev, int input) +{ + struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev); + struct rgmii_regs *p = dev->base; + u32 fer; + + RGMII_DBG2(dev, "put_mdio(%d)" NL, input); + + if (dev->type != RGMII_AXON) + return; + + fer = in_be32(&p->fer); + fer &= ~(0x00080000u >> input); + out_be32(&p->fer, fer); + (void)in_be32(&p->fer); + + DBG2(dev, " fer = 0x%08x\n", fer); + + mutex_unlock(&dev->lock); +} + +void __devexit rgmii_detach(struct of_device *ofdev, int input) +{ + struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev); + struct rgmii_regs *p = dev->base; + + mutex_lock(&dev->lock); + + BUG_ON(!dev || dev->users == 0); + + RGMII_DBG(dev, "detach(%d)" NL, input); + + /* Disable this input */ + out_be32(&p->fer, in_be32(&p->fer) & ~RGMII_FER_MASK(input)); + + --dev->users; + + mutex_unlock(&dev->lock); +} + +int rgmii_get_regs_len(struct of_device *ofdev) +{ + return sizeof(struct emac_ethtool_regs_subhdr) + + sizeof(struct rgmii_regs); +} + +void *rgmii_dump_regs(struct of_device *ofdev, void *buf) +{ + struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev); + struct emac_ethtool_regs_subhdr *hdr = buf; + struct rgmii_regs *regs = (struct rgmii_regs *)(hdr + 1); + + hdr->version = 0; + hdr->index = 0; /* for now, are there chips with more than one + * rgmii ? if yes, then we'll add a cell_index + * like we do for emac + */ + memcpy_fromio(regs, dev->base, sizeof(struct rgmii_regs)); + return regs + 1; +} + + +static int __devinit rgmii_probe(struct of_device *ofdev, + const struct of_device_id *match) +{ + struct device_node *np = ofdev->node; + struct rgmii_instance *dev; + struct resource regs; + int rc; + + rc = -ENOMEM; + dev = kzalloc(sizeof(struct rgmii_instance), GFP_KERNEL); + if (dev == NULL) { + printk(KERN_ERR "%s: could not allocate RGMII device!\n", + np->full_name); + goto err_gone; + } + + mutex_init(&dev->lock); + dev->ofdev = ofdev; + + rc = -ENXIO; + if (of_address_to_resource(np, 0, ®s)) { + printk(KERN_ERR "%s: Can't get registers address\n", + np->full_name); + goto err_free; + } + + rc = -ENOMEM; + dev->base = (struct rgmii_regs *)ioremap(regs.start, + sizeof(struct rgmii_regs)); + if (dev->base == NULL) { + printk(KERN_ERR "%s: Can't map device registers!\n", + np->full_name); + goto err_free; + } + + /* Check for RGMII type */ + if (device_is_compatible(ofdev->node, "ibm,rgmii-axon")) + dev->type = RGMII_AXON; + else + dev->type = RGMII_STANDARD; + + DBG2(dev, " Boot FER = 0x%08x, SSR = 0x%08x\n", + in_be32(&dev->base->fer), in_be32(&dev->base->ssr)); + + /* Disable all inputs by default */ + out_be32(&dev->base->fer, 0); + + printk(KERN_INFO + "RGMII %s %s initialized\n", + dev->type == RGMII_STANDARD ? "standard" : "axon", + ofdev->node->full_name); + + wmb(); + dev_set_drvdata(&ofdev->dev, dev); + + return 0; + + err_free: + kfree(dev); + err_gone: + return rc; +} + +static int __devexit rgmii_remove(struct of_device *ofdev) +{ + struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev); + + dev_set_drvdata(&ofdev->dev, NULL); + + WARN_ON(dev->users != 0); + + iounmap(dev->base); + kfree(dev); + + return 0; +} + +static struct of_device_id rgmii_match[] = +{ + { + .type = "rgmii-interface", + .compatible = "ibm,rgmii", + }, + { + .type = "emac-rgmii", + }, + {}, +}; + +static struct of_platform_driver rgmii_driver = { + .name = "emac-rgmii", + .match_table = rgmii_match, + + .probe = rgmii_probe, + .remove = rgmii_remove, +}; + +int __init rgmii_init(void) +{ + return of_register_platform_driver(&rgmii_driver); +} + +void rgmii_exit(void) +{ + of_unregister_platform_driver(&rgmii_driver); +} diff --git a/drivers/net/ibm_newemac/rgmii.h b/drivers/net/ibm_newemac/rgmii.h new file mode 100644 index 000000000000..57806833121e --- /dev/null +++ b/drivers/net/ibm_newemac/rgmii.h @@ -0,0 +1,76 @@ +/* + * drivers/net/ibm_newemac/rgmii.h + * + * Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support. + * + * Based on ocp_zmii.h/ibm_emac_zmii.h + * Armin Kuster akuster@mvista.com + * + * Copyright 2004 MontaVista Software, Inc. + * Matt Porter <mporter@kernel.crashing.org> + * + * Copyright (c) 2004, 2005 Zultys Technologies. + * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __IBM_NEWEMAC_RGMII_H +#define __IBM_NEWEMAC_RGMII_H + +/* RGMII bridge type */ +#define RGMII_STANDARD 0 +#define RGMII_AXON 1 + +/* RGMII bridge */ +struct rgmii_regs { + u32 fer; /* Function enable register */ + u32 ssr; /* Speed select register */ +}; + +/* RGMII device */ +struct rgmii_instance { + struct rgmii_regs __iomem *base; + + /* Type of RGMII bridge */ + int type; + + /* Only one EMAC whacks us at a time */ + struct mutex lock; + + /* number of EMACs using this RGMII bridge */ + int users; + + /* OF device instance */ + struct of_device *ofdev; +}; + +#ifdef CONFIG_IBM_NEW_EMAC_RGMII + +extern int rgmii_init(void); +extern void rgmii_exit(void); +extern int rgmii_attach(struct of_device *ofdev, int input, int mode); +extern void rgmii_detach(struct of_device *ofdev, int input); +extern void rgmii_get_mdio(struct of_device *ofdev, int input); +extern void rgmii_put_mdio(struct of_device *ofdev, int input); +extern void rgmii_set_speed(struct of_device *ofdev, int input, int speed); +extern int rgmii_get_regs_len(struct of_device *ofdev); +extern void *rgmii_dump_regs(struct of_device *ofdev, void *buf); + +#else + +# define rgmii_init() 0 +# define rgmii_exit() do { } while(0) +# define rgmii_attach(x,y,z) (-ENXIO) +# define rgmii_detach(x,y) do { } while(0) +# define rgmii_get_mdio(o,i) do { } while (0) +# define rgmii_put_mdio(o,i) do { } while (0) +# define rgmii_set_speed(x,y,z) do { } while(0) +# define rgmii_get_regs_len(x) 0 +# define rgmii_dump_regs(x,buf) (buf) +#endif /* !CONFIG_IBM_NEW_EMAC_RGMII */ + +#endif /* __IBM_NEWEMAC_RGMII_H */ diff --git a/drivers/net/ibm_newemac/tah.c b/drivers/net/ibm_newemac/tah.c new file mode 100644 index 000000000000..e05c7e81efb6 --- /dev/null +++ b/drivers/net/ibm_newemac/tah.c @@ -0,0 +1,173 @@ +/* + * drivers/net/ibm_newemac/tah.c + * + * Driver for PowerPC 4xx on-chip ethernet controller, TAH support. + * + * Copyright 2004 MontaVista Software, Inc. + * Matt Porter <mporter@kernel.crashing.org> + * + * Copyright (c) 2005 Eugene Surovegin <ebs@ebshome.net> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <asm/io.h> + +#include "emac.h" +#include "core.h" + +int __devinit tah_attach(struct of_device *ofdev, int channel) +{ + struct tah_instance *dev = dev_get_drvdata(&ofdev->dev); + + mutex_lock(&dev->lock); + /* Reset has been done at probe() time... nothing else to do for now */ + ++dev->users; + mutex_unlock(&dev->lock); + + return 0; +} + +void __devexit tah_detach(struct of_device *ofdev, int channel) +{ + struct tah_instance *dev = dev_get_drvdata(&ofdev->dev); + + mutex_lock(&dev->lock); + --dev->users; + mutex_unlock(&dev->lock); +} + +void tah_reset(struct of_device *ofdev) +{ + struct tah_instance *dev = dev_get_drvdata(&ofdev->dev); + struct tah_regs *p = dev->base; + int n; + + /* Reset TAH */ + out_be32(&p->mr, TAH_MR_SR); + n = 100; + while ((in_be32(&p->mr) & TAH_MR_SR) && n) + --n; + + if (unlikely(!n)) + printk(KERN_ERR "%s: reset timeout\n", ofdev->node->full_name); + + /* 10KB TAH TX FIFO accomodates the max MTU of 9000 */ + out_be32(&p->mr, + TAH_MR_CVR | TAH_MR_ST_768 | TAH_MR_TFS_10KB | TAH_MR_DTFP | + TAH_MR_DIG); +} + +int tah_get_regs_len(struct of_device *ofdev) +{ + return sizeof(struct emac_ethtool_regs_subhdr) + + sizeof(struct tah_regs); +} + +void *tah_dump_regs(struct of_device *ofdev, void *buf) +{ + struct tah_instance *dev = dev_get_drvdata(&ofdev->dev); + struct emac_ethtool_regs_subhdr *hdr = buf; + struct tah_regs *regs = (struct tah_regs *)(hdr + 1); + + hdr->version = 0; + hdr->index = 0; /* for now, are there chips with more than one + * zmii ? if yes, then we'll add a cell_index + * like we do for emac + */ + memcpy_fromio(regs, dev->base, sizeof(struct tah_regs)); + return regs + 1; +} + +static int __devinit tah_probe(struct of_device *ofdev, + const struct of_device_id *match) +{ + struct device_node *np = ofdev->node; + struct tah_instance *dev; + struct resource regs; + int rc; + + rc = -ENOMEM; + dev = kzalloc(sizeof(struct tah_instance), GFP_KERNEL); + if (dev == NULL) { + printk(KERN_ERR "%s: could not allocate TAH device!\n", + np->full_name); + goto err_gone; + } + + mutex_init(&dev->lock); + dev->ofdev = ofdev; + + rc = -ENXIO; + if (of_address_to_resource(np, 0, ®s)) { + printk(KERN_ERR "%s: Can't get registers address\n", + np->full_name); + goto err_free; + } + + rc = -ENOMEM; + dev->base = (struct tah_regs *)ioremap(regs.start, + sizeof(struct tah_regs)); + if (dev->base == NULL) { + printk(KERN_ERR "%s: Can't map device registers!\n", + np->full_name); + goto err_free; + } + + /* Initialize TAH and enable IPv4 checksum verification, no TSO yet */ + tah_reset(ofdev); + + printk(KERN_INFO + "TAH %s initialized\n", ofdev->node->full_name); + wmb(); + dev_set_drvdata(&ofdev->dev, dev); + + return 0; + + err_free: + kfree(dev); + err_gone: + return rc; +} + +static int __devexit tah_remove(struct of_device *ofdev) +{ + struct tah_instance *dev = dev_get_drvdata(&ofdev->dev); + + dev_set_drvdata(&ofdev->dev, NULL); + + WARN_ON(dev->users != 0); + + iounmap(dev->base); + kfree(dev); + + return 0; +} + +static struct of_device_id tah_match[] = +{ + { + .type = "tah", + }, + {}, +}; + +static struct of_platform_driver tah_driver = { + .name = "emac-tah", + .match_table = tah_match, + + .probe = tah_probe, + .remove = tah_remove, +}; + +int __init tah_init(void) +{ + return of_register_platform_driver(&tah_driver); +} + +void tah_exit(void) +{ + of_unregister_platform_driver(&tah_driver); +} diff --git a/drivers/net/ibm_newemac/tah.h b/drivers/net/ibm_newemac/tah.h new file mode 100644 index 000000000000..bc41853b6e26 --- /dev/null +++ b/drivers/net/ibm_newemac/tah.h @@ -0,0 +1,90 @@ +/* + * drivers/net/ibm_newemac/tah.h + * + * Driver for PowerPC 4xx on-chip ethernet controller, TAH support. + * + * Copyright 2004 MontaVista Software, Inc. + * Matt Porter <mporter@kernel.crashing.org> + * + * Copyright (c) 2005 Eugene Surovegin <ebs@ebshome.net> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __IBM_NEWEMAC_TAH_H +#define __IBM_NEWEMAC_TAH_H + +/* TAH */ +struct tah_regs { + u32 revid; + u32 pad[3]; + u32 mr; + u32 ssr0; + u32 ssr1; + u32 ssr2; + u32 ssr3; + u32 ssr4; + u32 ssr5; + u32 tsr; +}; + + +/* TAH device */ +struct tah_instance { + struct tah_regs __iomem *base; + + /* Only one EMAC whacks us at a time */ + struct mutex lock; + + /* number of EMACs using this TAH */ + int users; + + /* OF device instance */ + struct of_device *ofdev; +}; + + +/* TAH engine */ +#define TAH_MR_CVR 0x80000000 +#define TAH_MR_SR 0x40000000 +#define TAH_MR_ST_256 0x01000000 +#define TAH_MR_ST_512 0x02000000 +#define TAH_MR_ST_768 0x03000000 +#define TAH_MR_ST_1024 0x04000000 +#define TAH_MR_ST_1280 0x05000000 +#define TAH_MR_ST_1536 0x06000000 +#define TAH_MR_TFS_16KB 0x00000000 +#define TAH_MR_TFS_2KB 0x00200000 +#define TAH_MR_TFS_4KB 0x00400000 +#define TAH_MR_TFS_6KB 0x00600000 +#define TAH_MR_TFS_8KB 0x00800000 +#define TAH_MR_TFS_10KB 0x00a00000 +#define TAH_MR_DTFP 0x00100000 +#define TAH_MR_DIG 0x00080000 + +#ifdef CONFIG_IBM_NEW_EMAC_TAH + +extern int tah_init(void); +extern void tah_exit(void); +extern int tah_attach(struct of_device *ofdev, int channel); +extern void tah_detach(struct of_device *ofdev, int channel); +extern void tah_reset(struct of_device *ofdev); +extern int tah_get_regs_len(struct of_device *ofdev); +extern void *tah_dump_regs(struct of_device *ofdev, void *buf); + +#else + +# define tah_init() 0 +# define tah_exit() do { } while(0) +# define tah_attach(x,y) (-ENXIO) +# define tah_detach(x,y) do { } while(0) +# define tah_reset(x) do { } while(0) +# define tah_get_regs_len(x) 0 +# define tah_dump_regs(x,buf) (buf) + +#endif /* !CONFIG_IBM_NEW_EMAC_TAH */ + +#endif /* __IBM_NEWEMAC_TAH_H */ diff --git a/drivers/net/ibm_newemac/zmii.c b/drivers/net/ibm_newemac/zmii.c new file mode 100644 index 000000000000..d06312901848 --- /dev/null +++ b/drivers/net/ibm_newemac/zmii.c @@ -0,0 +1,322 @@ +/* + * drivers/net/ibm_newemac/zmii.c + * + * Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support. + * + * Copyright (c) 2004, 2005 Zultys Technologies. + * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> + * + * Based on original work by + * Armin Kuster <akuster@mvista.com> + * Copyright 2001 MontaVista Softare Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include <linux/kernel.h> +#include <linux/ethtool.h> +#include <asm/io.h> + +#include "emac.h" +#include "core.h" + +/* ZMIIx_FER */ +#define ZMII_FER_MDI(idx) (0x80000000 >> ((idx) * 4)) +#define ZMII_FER_MDI_ALL (ZMII_FER_MDI(0) | ZMII_FER_MDI(1) | \ + ZMII_FER_MDI(2) | ZMII_FER_MDI(3)) + +#define ZMII_FER_SMII(idx) (0x40000000 >> ((idx) * 4)) +#define ZMII_FER_RMII(idx) (0x20000000 >> ((idx) * 4)) +#define ZMII_FER_MII(idx) (0x10000000 >> ((idx) * 4)) + +/* ZMIIx_SSR */ +#define ZMII_SSR_SCI(idx) (0x40000000 >> ((idx) * 4)) +#define ZMII_SSR_FSS(idx) (0x20000000 >> ((idx) * 4)) +#define ZMII_SSR_SP(idx) (0x10000000 >> ((idx) * 4)) + +/* ZMII only supports MII, RMII and SMII + * we also support autodetection for backward compatibility + */ +static inline int zmii_valid_mode(int mode) +{ + return mode == PHY_MODE_MII || + mode == PHY_MODE_RMII || + mode == PHY_MODE_SMII || + mode == PHY_MODE_NA; +} + +static inline const char *zmii_mode_name(int mode) +{ + switch (mode) { + case PHY_MODE_MII: + return "MII"; + case PHY_MODE_RMII: + return "RMII"; + case PHY_MODE_SMII: + return "SMII"; + default: + BUG(); + } +} + +static inline u32 zmii_mode_mask(int mode, int input) +{ + switch (mode) { + case PHY_MODE_MII: + return ZMII_FER_MII(input); + case PHY_MODE_RMII: + return ZMII_FER_RMII(input); + case PHY_MODE_SMII: + return ZMII_FER_SMII(input); + default: + return 0; + } +} + +int __devinit zmii_attach(struct of_device *ofdev, int input, int *mode) +{ + struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev); + struct zmii_regs *p = dev->base; + + ZMII_DBG(dev, "init(%d, %d)" NL, input, *mode); + + if (!zmii_valid_mode(*mode)) + /* Probably an EMAC connected to RGMII, + * but it still may need ZMII for MDIO so + * we don't fail here. + */ + return 0; + + mutex_lock(&dev->lock); + + /* Autodetect ZMII mode if not specified. + * This is only for backward compatibility with the old driver. + * Please, always specify PHY mode in your board port to avoid + * any surprises. + */ + if (dev->mode == PHY_MODE_NA) { + if (*mode == PHY_MODE_NA) { + u32 r = dev->fer_save; + + ZMII_DBG(dev, "autodetecting mode, FER = 0x%08x" NL, r); + + if (r & (ZMII_FER_MII(0) | ZMII_FER_MII(1))) + dev->mode = PHY_MODE_MII; + else if (r & (ZMII_FER_RMII(0) | ZMII_FER_RMII(1))) + dev->mode = PHY_MODE_RMII; + else + dev->mode = PHY_MODE_SMII; + } else + dev->mode = *mode; + + printk(KERN_NOTICE "%s: bridge in %s mode\n", + ofdev->node->full_name, zmii_mode_name(dev->mode)); + } else { + /* All inputs must use the same mode */ + if (*mode != PHY_MODE_NA && *mode != dev->mode) { + printk(KERN_ERR + "%s: invalid mode %d specified for input %d\n", + ofdev->node->full_name, *mode, input); + mutex_unlock(&dev->lock); + return -EINVAL; + } + } + + /* Report back correct PHY mode, + * it may be used during PHY initialization. + */ + *mode = dev->mode; + + /* Enable this input */ + out_be32(&p->fer, in_be32(&p->fer) | zmii_mode_mask(dev->mode, input)); + ++dev->users; + + mutex_unlock(&dev->lock); + + return 0; +} + +void zmii_get_mdio(struct of_device *ofdev, int input) +{ + struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev); + u32 fer; + + ZMII_DBG2(dev, "get_mdio(%d)" NL, input); + + mutex_lock(&dev->lock); + + fer = in_be32(&dev->base->fer) & ~ZMII_FER_MDI_ALL; + out_be32(&dev->base->fer, fer | ZMII_FER_MDI(input)); +} + +void zmii_put_mdio(struct of_device *ofdev, int input) +{ + struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev); + + ZMII_DBG2(dev, "put_mdio(%d)" NL, input); + mutex_unlock(&dev->lock); +} + + +void zmii_set_speed(struct of_device *ofdev, int input, int speed) +{ + struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev); + u32 ssr; + + mutex_lock(&dev->lock); + + ssr = in_be32(&dev->base->ssr); + + ZMII_DBG(dev, "speed(%d, %d)" NL, input, speed); + + if (speed == SPEED_100) + ssr |= ZMII_SSR_SP(input); + else + ssr &= ~ZMII_SSR_SP(input); + + out_be32(&dev->base->ssr, ssr); + + mutex_unlock(&dev->lock); +} + +void __devexit zmii_detach(struct of_device *ofdev, int input) +{ + struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev); + + BUG_ON(!dev || dev->users == 0); + + mutex_lock(&dev->lock); + + ZMII_DBG(dev, "detach(%d)" NL, input); + + /* Disable this input */ + out_be32(&dev->base->fer, + in_be32(&dev->base->fer) & ~zmii_mode_mask(dev->mode, input)); + + --dev->users; + + mutex_unlock(&dev->lock); +} + +int zmii_get_regs_len(struct of_device *ofdev) +{ + return sizeof(struct emac_ethtool_regs_subhdr) + + sizeof(struct zmii_regs); +} + +void *zmii_dump_regs(struct of_device *ofdev, void *buf) +{ + struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev); + struct emac_ethtool_regs_subhdr *hdr = buf; + struct zmii_regs *regs = (struct zmii_regs *)(hdr + 1); + + hdr->version = 0; + hdr->index = 0; /* for now, are there chips with more than one + * zmii ? if yes, then we'll add a cell_index + * like we do for emac + */ + memcpy_fromio(regs, dev->base, sizeof(struct zmii_regs)); + return regs + 1; +} + +static int __devinit zmii_probe(struct of_device *ofdev, + const struct of_device_id *match) +{ + struct device_node *np = ofdev->node; + struct zmii_instance *dev; + struct resource regs; + int rc; + + rc = -ENOMEM; + dev = kzalloc(sizeof(struct zmii_instance), GFP_KERNEL); + if (dev == NULL) { + printk(KERN_ERR "%s: could not allocate ZMII device!\n", + np->full_name); + goto err_gone; + } + + mutex_init(&dev->lock); + dev->ofdev = ofdev; + dev->mode = PHY_MODE_NA; + + rc = -ENXIO; + if (of_address_to_resource(np, 0, ®s)) { + printk(KERN_ERR "%s: Can't get registers address\n", + np->full_name); + goto err_free; + } + + rc = -ENOMEM; + dev->base = (struct zmii_regs *)ioremap(regs.start, + sizeof(struct zmii_regs)); + if (dev->base == NULL) { + printk(KERN_ERR "%s: Can't map device registers!\n", + np->full_name); + goto err_free; + } + + /* We may need FER value for autodetection later */ + dev->fer_save = in_be32(&dev->base->fer); + + /* Disable all inputs by default */ + out_be32(&dev->base->fer, 0); + + printk(KERN_INFO + "ZMII %s initialized\n", ofdev->node->full_name); + wmb(); + dev_set_drvdata(&ofdev->dev, dev); + + return 0; + + err_free: + kfree(dev); + err_gone: + return rc; +} + +static int __devexit zmii_remove(struct of_device *ofdev) +{ + struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev); + + dev_set_drvdata(&ofdev->dev, NULL); + + WARN_ON(dev->users != 0); + + iounmap(dev->base); + kfree(dev); + + return 0; +} + +static struct of_device_id zmii_match[] = +{ + { + .compatible = "ibm,zmii", + }, + /* For backward compat with old DT */ + { + .type = "emac-zmii", + }, + {}, +}; + +static struct of_platform_driver zmii_driver = { + .name = "emac-zmii", + .match_table = zmii_match, + + .probe = zmii_probe, + .remove = zmii_remove, +}; + +int __init zmii_init(void) +{ + return of_register_platform_driver(&zmii_driver); +} + +void zmii_exit(void) +{ + of_unregister_platform_driver(&zmii_driver); +} diff --git a/drivers/net/ibm_newemac/zmii.h b/drivers/net/ibm_newemac/zmii.h new file mode 100644 index 000000000000..82a9968b1f74 --- /dev/null +++ b/drivers/net/ibm_newemac/zmii.h @@ -0,0 +1,73 @@ +/* + * drivers/net/ibm_newemac/zmii.h + * + * Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support. + * + * Copyright (c) 2004, 2005 Zultys Technologies. + * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> + * + * Based on original work by + * Armin Kuster <akuster@mvista.com> + * Copyright 2001 MontaVista Softare Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#ifndef __IBM_NEWEMAC_ZMII_H +#define __IBM_NEWEMAC_ZMII_H + +/* ZMII bridge registers */ +struct zmii_regs { + u32 fer; /* Function enable reg */ + u32 ssr; /* Speed select reg */ + u32 smiirs; /* SMII status reg */ +}; + +/* ZMII device */ +struct zmii_instance { + struct zmii_regs __iomem *base; + + /* Only one EMAC whacks us at a time */ + struct mutex lock; + + /* subset of PHY_MODE_XXXX */ + int mode; + + /* number of EMACs using this ZMII bridge */ + int users; + + /* FER value left by firmware */ + u32 fer_save; + + /* OF device instance */ + struct of_device *ofdev; +}; + +#ifdef CONFIG_IBM_NEW_EMAC_ZMII + +extern int zmii_init(void); +extern void zmii_exit(void); +extern int zmii_attach(struct of_device *ofdev, int input, int *mode); +extern void zmii_detach(struct of_device *ofdev, int input); +extern void zmii_get_mdio(struct of_device *ofdev, int input); +extern void zmii_put_mdio(struct of_device *ofdev, int input); +extern void zmii_set_speed(struct of_device *ofdev, int input, int speed); +extern int zmii_get_regs_len(struct of_device *ocpdev); +extern void *zmii_dump_regs(struct of_device *ofdev, void *buf); + +#else +# define zmii_init() 0 +# define zmii_exit() do { } while(0) +# define zmii_attach(x,y,z) (-ENXIO) +# define zmii_detach(x,y) do { } while(0) +# define zmii_get_mdio(x,y) do { } while(0) +# define zmii_put_mdio(x,y) do { } while(0) +# define zmii_set_speed(x,y,z) do { } while(0) +# define zmii_get_regs_len(x) 0 +# define zmii_dump_regs(x,buf) (buf) +#endif /* !CONFIG_IBM_NEW_EMAC_ZMII */ + +#endif /* __IBM_NEWEMAC_ZMII_H */ |