diff options
1251 files changed, 27737 insertions, 10701 deletions
diff --git a/Documentation/admin-guide/pm/intel_pstate.rst b/Documentation/admin-guide/pm/intel_pstate.rst index ab2fe0eda1d7..8f1d3de449b5 100644 --- a/Documentation/admin-guide/pm/intel_pstate.rst +++ b/Documentation/admin-guide/pm/intel_pstate.rst @@ -324,8 +324,7 @@ Global Attributes ``intel_pstate`` exposes several global attributes (files) in ``sysfs`` to control its functionality at the system level. They are located in the -``/sys/devices/system/cpu/cpufreq/intel_pstate/`` directory and affect all -CPUs. +``/sys/devices/system/cpu/intel_pstate/`` directory and affect all CPUs. Some of them are not present if the ``intel_pstate=per_cpu_perf_limits`` argument is passed to the kernel in the command line. @@ -379,6 +378,17 @@ argument is passed to the kernel in the command line. but it affects the maximum possible value of per-policy P-state limits (see `Interpretation of Policy Attributes`_ below for details). +``hwp_dynamic_boost`` + This attribute is only present if ``intel_pstate`` works in the + `active mode with the HWP feature enabled <Active Mode With HWP_>`_ in + the processor. If set (equal to 1), it causes the minimum P-state limit + to be increased dynamically for a short time whenever a task previously + waiting on I/O is selected to run on a given logical CPU (the purpose + of this mechanism is to improve performance). + + This setting has no effect on logical CPUs whose minimum P-state limit + is directly set to the highest non-turbo P-state or above it. + .. _status_attr: ``status`` @@ -410,7 +420,7 @@ argument is passed to the kernel in the command line. That only is supported in some configurations, though (for example, if the `HWP feature is enabled in the processor <Active Mode With HWP_>`_, the operation mode of the driver cannot be changed), and if it is not - supported in the current configuration, writes to this attribute with + supported in the current configuration, writes to this attribute will fail with an appropriate error. Interpretation of Policy Attributes diff --git a/Documentation/core-api/kernel-api.rst b/Documentation/core-api/kernel-api.rst index 8e44aea366c2..76fe2d0f5e7d 100644 --- a/Documentation/core-api/kernel-api.rst +++ b/Documentation/core-api/kernel-api.rst @@ -284,7 +284,7 @@ Resources Management MTRR Handling ------------- -.. kernel-doc:: arch/x86/kernel/cpu/mtrr/main.c +.. kernel-doc:: arch/x86/kernel/cpu/mtrr/mtrr.c :export: Security Framework diff --git a/Documentation/devicetree/bindings/arm/adapteva.txt b/Documentation/devicetree/bindings/arm/adapteva.txt deleted file mode 100644 index 1d8af9e36065..000000000000 --- a/Documentation/devicetree/bindings/arm/adapteva.txt +++ /dev/null @@ -1,7 +0,0 @@ -Adapteva Platforms Device Tree Bindings ---------------------------------------- - -Parallella board - -Required root node properties: - - compatible = "adapteva,parallella"; diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt index 69880560c0f0..b5c2b5c35766 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.txt +++ b/Documentation/devicetree/bindings/arm/amlogic.txt @@ -41,6 +41,14 @@ Boards with the Amlogic Meson GXL S905D SoC shall have the following properties: Required root node property: compatible: "amlogic,s905d", "amlogic,meson-gxl"; +Boards with the Amlogic Meson GXL S805X SoC shall have the following properties: + Required root node property: + compatible: "amlogic,s805x", "amlogic,meson-gxl"; + +Boards with the Amlogic Meson GXL S905W SoC shall have the following properties: + Required root node property: + compatible: "amlogic,s905w", "amlogic,meson-gxl"; + Boards with the Amlogic Meson GXM S912 SoC shall have the following properties: Required root node property: compatible: "amlogic,s912", "amlogic,meson-gxm"; @@ -79,6 +87,11 @@ Board compatible values (alphabetically, grouped by SoC): - "amlogic,p230" (Meson gxl s905d) - "amlogic,p231" (Meson gxl s905d) + - "amlogic,p241" (Meson gxl s805x) + + - "amlogic,p281" (Meson gxl s905w) + - "oranth,tx3-mini" (Meson gxl s905w) + - "amlogic,q200" (Meson gxm s912) - "amlogic,q201" (Meson gxm s912) - "khadas,vim2" (Meson gxm s912) diff --git a/Documentation/devicetree/bindings/arm/atmel-pmc.txt b/Documentation/devicetree/bindings/arm/atmel-pmc.txt deleted file mode 100644 index 795cc78543fe..000000000000 --- a/Documentation/devicetree/bindings/arm/atmel-pmc.txt +++ /dev/null @@ -1,14 +0,0 @@ -* Power Management Controller (PMC) - -Required properties: -- compatible: Should be "atmel,<chip>-pmc". - <chip> can be: at91rm9200, at91sam9260, at91sam9g45, at91sam9n12, - at91sam9x5, sama5d3 - -- reg: Should contain PMC registers location and length - -Examples: - pmc: pmc@fffffc00 { - compatible = "atmel,at91rm9200-pmc"; - reg = <0xfffffc00 0x100>; - }; diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index 29e1dc5d506d..96dfccc0faa8 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt @@ -183,6 +183,7 @@ described below. "marvell,sheeva-v5" "nvidia,tegra132-denver" "nvidia,tegra186-denver" + "nvidia,tegra194-carmel" "qcom,krait" "qcom,kryo" "qcom,kryo385" @@ -219,6 +220,7 @@ described below. "qcom,kpss-acc-v1" "qcom,kpss-acc-v2" "renesas,apmu" + "renesas,r9a06g032-smp" "rockchip,rk3036-smp" "rockchip,rk3066-smp" "ste,dbx500-smp" diff --git a/Documentation/devicetree/bindings/arm/freescale/m4if.txt b/Documentation/devicetree/bindings/arm/freescale/m4if.txt new file mode 100644 index 000000000000..93bd7b867a53 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/freescale/m4if.txt @@ -0,0 +1,12 @@ +* Freescale Multi Master Multi Memory Interface (M4IF) module + +Required properties: +- compatible : Should be "fsl,imx51-m4if" +- reg : Address and length of the register set for the device + +Example: + +m4if: m4if@83fd8000 { + compatible = "fsl,imx51-m4if"; + reg = <0x83fd8000 0x1000>; +}; diff --git a/Documentation/devicetree/bindings/arm/freescale/tigerp.txt b/Documentation/devicetree/bindings/arm/freescale/tigerp.txt new file mode 100644 index 000000000000..19e2aad63d6e --- /dev/null +++ b/Documentation/devicetree/bindings/arm/freescale/tigerp.txt @@ -0,0 +1,12 @@ +* Freescale Tigerp platform module + +Required properties: +- compatible : Should be "fsl,imx51-tigerp" +- reg : Address and length of the register set for the device + +Example: + +tigerp: tigerp@83fa0000 { + compatible = "fsl,imx51-tigerp"; + reg = <0x83fa0000 0x28>; +}; diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt index cdb9dd705754..8a1baa2b9723 100644 --- a/Documentation/devicetree/bindings/arm/fsl.txt +++ b/Documentation/devicetree/bindings/arm/fsl.txt @@ -53,6 +53,10 @@ i.MX6 Quad SABRE Automotive Board Required root node properties: - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q"; +i.MX6SLL EVK board +Required root node properties: + - compatible = "fsl,imx6sll-evk", "fsl,imx6sll"; + Generic i.MX boards ------------------- diff --git a/Documentation/devicetree/bindings/arm/insignal-boards.txt b/Documentation/devicetree/bindings/arm/insignal-boards.txt deleted file mode 100644 index 524c3dc5d808..000000000000 --- a/Documentation/devicetree/bindings/arm/insignal-boards.txt +++ /dev/null @@ -1,8 +0,0 @@ -* Insignal's Exynos4210 based Origen evaluation board - -Origen low-cost evaluation board is based on Samsung's Exynos4210 SoC. - -Required root node properties: - - compatible = should be one or more of the following. - (a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board. - (b) "samsung,exynos4210" - for boards based on Exynos4210 SoC. diff --git a/Documentation/devicetree/bindings/arm/omap/l4.txt b/Documentation/devicetree/bindings/arm/omap/l4.txt index b4f8a16e7e3b..6816adcdc15f 100644 --- a/Documentation/devicetree/bindings/arm/omap/l4.txt +++ b/Documentation/devicetree/bindings/arm/omap/l4.txt @@ -7,6 +7,7 @@ Required properties: Should be "ti,omap2-l4-wkup" for OMAP2 family l4 wkup bus Should be "ti,omap3-l4-core" for OMAP3 family l4 core bus Should be "ti,omap4-l4-cfg" for OMAP4 family l4 cfg bus + Should be "ti,omap4-l4-per" for OMAP4 family l4 per bus Should be "ti,omap4-l4-wkup" for OMAP4 family l4 wkup bus Should be "ti,omap5-l4-cfg" for OMAP5 family l4 cfg bus Should be "ti,omap5-l4-wkup" for OMAP5 family l4 wkup bus @@ -15,11 +16,21 @@ Required properties: Should be "ti,am3-l4-wkup" for AM33xx family l4 wkup bus Should be "ti,am4-l4-wkup" for AM43xx family l4 wkup bus - ranges : contains the IO map range for the bus +- reg : registers link agent and interconnect agent and access protection +- reg-names : "la" for link agent, "ia0" to "ia3" for one to three + interconnect agent instances, "ap" for access if it exists Examples: -l4: l4@48000000 { - compatible "ti,omap2-l4", "simple-bus"; +l4: interconnect@48000000 { + compatible "ti,omap4-l4-per", "simple-bus"; + reg = <0x48000000 0x800>, + <0x48000800 0x800>, + <0x48001000 0x400>, + <0x48001400 0x400>, + <0x48001800 0x400>, + <0x48001c00 0x400>; + reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3"; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x48000000 0x100000>; diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt index 1c1d62d03c4f..145ab0b0a030 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.txt +++ b/Documentation/devicetree/bindings/arm/rockchip.txt @@ -66,6 +66,15 @@ Rockchip platforms device tree bindings Required root node properties: - compatible = "geekbuying,geekbox", "rockchip,rk3368"; +- Google Bob (Asus Chromebook Flip C101PA): + Required root node properties: + compatible = "google,bob-rev13", "google,bob-rev12", + "google,bob-rev11", "google,bob-rev10", + "google,bob-rev9", "google,bob-rev8", + "google,bob-rev7", "google,bob-rev6", + "google,bob-rev5", "google,bob-rev4", + "google,bob", "google,gru", "rockchip,rk3399"; + - Google Brain (dev-board): Required root node properties: - compatible = "google,veyron-brain-rev0", "google,veyron-brain", diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt index bdadc3da9556..ff75bf7ac3a2 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt @@ -1,7 +1,10 @@ -* Samsung's Exynos SoC based boards +* Samsung's Exynos and S5P SoC based boards Required root node properties: - compatible = should be one or more of the following. + - "samsung,aries" - for S5PV210-based Samsung Aries board. + - "samsung,fascinate4g" - for S5PV210-based Samsung Galaxy S Fascinate 4G (SGH-T959P) board. + - "samsung,galaxys" - for S5PV210-based Samsung Galaxy S (i9000) board. - "samsung,artik5" - for Exynos3250-based Samsung ARTIK5 module. - "samsung,artik5-eval" - for Exynos3250-based Samsung ARTIK5 eval board. - "samsung,monk" - for Exynos3250-based Samsung Simband board. diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt index d8cf740132c6..89b4a389fbc7 100644 --- a/Documentation/devicetree/bindings/arm/shmobile.txt +++ b/Documentation/devicetree/bindings/arm/shmobile.txt @@ -51,7 +51,8 @@ SoCs: compatible = "renesas,r8a77990" - R-Car D3 (R8A77995) compatible = "renesas,r8a77995" - + - RZ/N1D (R9A06G032) + compatible = "renesas,r9a06g032" Boards: @@ -112,6 +113,8 @@ Boards: compatible = "renesas,porter", "renesas,r8a7791" - RSKRZA1 (YR0K77210C000BE) compatible = "renesas,rskrza1", "renesas,r7s72100" + - RZN1D-DB (RZ/N1D Demo Board for the RZ/N1D 400 pins package) + compatible = "renesas,rzn1d400-db", "renesas,r9a06g032" - Salvator-X (RTP0RC7795SIPB0010S) compatible = "renesas,salvator-x", "renesas,r8a7795" - Salvator-X (RTP0RC7796SIPB0011S) diff --git a/Documentation/devicetree/bindings/arm/ti/k3.txt b/Documentation/devicetree/bindings/arm/ti/k3.txt new file mode 100644 index 000000000000..6a059cabb2da --- /dev/null +++ b/Documentation/devicetree/bindings/arm/ti/k3.txt @@ -0,0 +1,23 @@ +Texas Instruments K3 Multicore SoC architecture device tree bindings +-------------------------------------------------------------------- + +Platforms based on Texas Instruments K3 Multicore SoC architecture +shall follow the following scheme: + +SoCs +---- + +Each device tree root node must specify which exact SoC in K3 Multicore SoC +architecture it uses, using one of the following compatible values: + +- AM654 + compatible = "ti,am654"; + +Boards +------ + +In addition, each device tree root node must specify which one or more +of the following board-specific compatible values: + +- AM654 EVM + compatible = "ti,am654-evm", "ti,am654"; diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt b/Documentation/devicetree/bindings/arm/xilinx.txt index b9043bc35c14..26fe5ecc4332 100644 --- a/Documentation/devicetree/bindings/arm/xilinx.txt +++ b/Documentation/devicetree/bindings/arm/xilinx.txt @@ -8,18 +8,38 @@ Required root node properties: Additional compatible strings: -- Xilinx internal board cc108 +- Adapteva Parallella board + "adapteva,parallella" + +- Avnet MicroZed board + "avnet,zynq-microzed" + "xlnx,zynq-microzed" + +- Avnet ZedBoard board + "avnet,zynq-zed" + "xlnx,zynq-zed" + +- Digilent Zybo board + "digilent,zynq-zybo" + +- Digilent Zybo Z7 board + "digilent,zynq-zybo-z7" + +- Xilinx CC108 internal board "xlnx,zynq-cc108" -- Xilinx internal board zc770 with different FMC cards +- Xilinx ZC702 internal board + "xlnx,zynq-zc702" + +- Xilinx ZC706 internal board + "xlnx,zynq-zc706" + +- Xilinx ZC770 internal board, with different FMC cards "xlnx,zynq-zc770-xm010" "xlnx,zynq-zc770-xm011" "xlnx,zynq-zc770-xm012" "xlnx,zynq-zc770-xm013" -- Digilent Zybo Z7 board - "digilent,zynq-zybo-z7" - --------------------------------------------------------------- Xilinx Zynq UltraScale+ MPSoC Platforms Device Tree Bindings diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.txt b/Documentation/devicetree/bindings/bus/ti-sysc.txt index d8ed5b780ed9..91dc2333af01 100644 --- a/Documentation/devicetree/bindings/bus/ti-sysc.txt +++ b/Documentation/devicetree/bindings/bus/ti-sysc.txt @@ -36,6 +36,7 @@ Required standard properties: "ti,sysc-omap-aes" "ti,sysc-mcasp" "ti,sysc-usb-host-fs" + "ti,sysc-dra7-mcan" - reg shall have register areas implemented for the interconnect target module in question such as revision, sysc and syss diff --git a/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt new file mode 100644 index 000000000000..61777ad24f61 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt @@ -0,0 +1,56 @@ +* Amlogic AXG Audio Clock Controllers + +The Amlogic AXG audio clock controller generates and supplies clock to the +other elements of the audio subsystem, such as fifos, i2s, spdif and pdm +devices. + +Required Properties: + +- compatible : should be "amlogic,axg-audio-clkc" for the A113X and A113D +- reg : physical base address of the clock controller and length of + memory mapped region. +- clocks : a list of phandle + clock-specifier pairs for the clocks listed + in clock-names. +- clock-names : must contain the following: + * "pclk" - Main peripheral bus clock + may contain the following: + * "mst_in[0-7]" - 8 input plls to generate clock signals + * "slv_sclk[0-9]" - 10 slave bit clocks provided by external + components. + * "slv_lrclk[0-9]" - 10 slave sample clocks provided by external + components. +- resets : phandle of the internal reset line +- #clock-cells : should be 1. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. All available clocks are defined as +preprocessor macros in the dt-bindings/clock/axg-audio-clkc.h header and can be +used in device tree sources. + +Example: + +clkc_audio: clock-controller@0 { + compatible = "amlogic,axg-audio-clkc"; + reg = <0x0 0x0 0x0 0xb4>; + #clock-cells = <1>; + + clocks = <&clkc CLKID_AUDIO>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL3>, + <&clkc CLKID_HIFI_PLL>, + <&clkc CLKID_FCLK_DIV3>, + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_GP0_PLL>; + clock-names = "pclk", + "mst_in0", + "mst_in1", + "mst_in2", + "mst_in3", + "mst_in4", + "mst_in5", + "mst_in6", + "mst_in7"; + resets = <&reset RESET_AUDIO>; +}; diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt index 51c259a92d02..a1f591969538 100644 --- a/Documentation/devicetree/bindings/clock/at91-clock.txt +++ b/Documentation/devicetree/bindings/clock/at91-clock.txt @@ -17,14 +17,13 @@ Required properties: "atmel,at91sam9x5-clk-slow-rc-osc": at91 internal slow RC oscillator - "atmel,at91rm9200-pmc" or - "atmel,at91sam9g45-pmc" or - "atmel,at91sam9n12-pmc" or - "atmel,at91sam9x5-pmc" or - "atmel,sama5d3-pmc": + "atmel,<chip>-pmc": at91 PMC (Power Management Controller) All at91 specific clocks (clocks defined below) must be child node of the PMC node. + <chip> can be: at91rm9200, at91sam9260, at91sam9261, + at91sam9263, at91sam9g45, at91sam9n12, at91sam9rl, at91sam9x5, + sama5d2, sama5d3 or sama5d4. "atmel,at91sam9x5-clk-slow" (under sckc node) or diff --git a/Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt new file mode 100644 index 000000000000..f2ec0d4f2dff --- /dev/null +++ b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt @@ -0,0 +1,23 @@ +Spreadtrum SC27xx PMIC Vibrator + +Required properties: +- compatible: should be "sprd,sc2731-vibrator". +- reg: address of vibrator control register. + +Example : + + sc2731_pmic: pmic@0 { + compatible = "sprd,sc2731"; + reg = <0>; + spi-max-frequency = <26000000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + + vibrator@eb4 { + compatible = "sprd,sc2731-vibrator"; + reg = <0xeb4>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt index cfe724398a12..5bb3a18cc38d 100644 --- a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt +++ b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt @@ -19,8 +19,6 @@ Required properties: - reset-names: must be "stmmaceth" - phy-mode: See ethernet.txt - phy-handle: See ethernet.txt -- #address-cells: shall be 1 -- #size-cells: shall be 0 - syscon: A phandle to the device containing the EMAC or GMAC clock register Optional properties: @@ -86,8 +84,6 @@ emac: ethernet@1c0b000 { reset-names = "stmmaceth"; clocks = <&ccu CLK_BUS_EMAC>; clock-names = "stmmaceth"; - #address-cells = <1>; - #size-cells = <0>; phy-handle = <&int_mii_phy>; phy-mode = "mii"; @@ -137,8 +133,6 @@ emac: ethernet@1c0b000 { reset-names = "stmmaceth"; clocks = <&ccu CLK_BUS_EMAC>; clock-names = "stmmaceth"; - #address-cells = <1>; - #size-cells = <0>; phy-handle = <&ext_rgmii_phy>; phy-mode = "rgmii"; @@ -191,8 +185,6 @@ emac: ethernet@1c0b000 { reset-names = "stmmaceth"; clocks = <&ccu CLK_BUS_EMAC>; clock-names = "stmmaceth"; - #address-cells = <1>; - #size-cells = <0>; phy-handle = <&ext_rgmii_phy>; phy-mode = "rgmii"; diff --git a/Documentation/devicetree/bindings/sound/mrvl,pxa-ssp.txt b/Documentation/devicetree/bindings/sound/mrvl,pxa-ssp.txt index 74c9ba6c2823..efd3fb1f68d2 100644 --- a/Documentation/devicetree/bindings/sound/mrvl,pxa-ssp.txt +++ b/Documentation/devicetree/bindings/sound/mrvl,pxa-ssp.txt @@ -9,20 +9,18 @@ Example: /* upstream device */ - ssp0: ssp@41000000 { + ssp1: ssp@41000000 { compatible = "mrvl,pxa3xx-ssp"; reg = <0x41000000 0x40>; interrupts = <24>; clock-names = "pxa27x-ssp.0"; - dmas = <&dma 13 - &dma 14>; - dma-names = "rx", "tx"; }; /* DAI as user */ ssp_dai0: ssp_dai@0 { compatible = "mrvl,pxa-ssp-dai"; - port = <&ssp0>; + port = <&ssp1>; + #sound-dai-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt b/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt new file mode 100644 index 000000000000..29bf91ccf5b7 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt @@ -0,0 +1,37 @@ +* Device tree bindings for Texas Instruments DaVinci timer + +This document provides bindings for the 64-bit timer in the DaVinci +architecture devices. The timer can be configured as a general-purpose 64-bit +timer, dual general-purpose 32-bit timers. When configured as dual 32-bit +timers, each half can operate in conjunction (chain mode) or independently +(unchained mode) of each other. + +The timer is a free running up-counter and can generate interrupts when the +counter reaches preset counter values. + +Also see ../watchdog/davinci-wdt.txt for timers that are configurable as +watchdog timers. + +Required properties: + +- compatible : should be "ti,da830-timer". +- reg : specifies base physical address and count of the registers. +- interrupts : interrupts generated by the timer. +- interrupt-names: should be "tint12", "tint34", "cmpint0", "cmpint1", + "cmpint2", "cmpint3", "cmpint4", "cmpint5", "cmpint6", + "cmpint7" ("cmpintX" may be omitted if not present in the + hardware). +- clocks : the clock feeding the timer clock. + +Example: + + clocksource: timer@20000 { + compatible = "ti,da830-timer"; + reg = <0x20000 0x1000>; + interrupts = <21>, <22>, <74>, <75>, <76>, <77>, <78>, <79>, + <80>, <81>; + interrupt-names = "tint12", "tint34", "cmpint0", "cmpint1", + "cmpint2", "cmpint3", "cmpint4", "cmpint5", + "cmpint6", "cmpint7"; + clocks = <&pll0_auxclk>; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 7cad066191ee..6770f8d75bb0 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -136,6 +136,7 @@ geekbuying GeekBuying gef GE Fanuc Intelligent Platforms Embedded Systems, Inc. GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc. geniatech Geniatech, Inc. +giantec Giantec Semiconductor, Inc. giantplus Giantplus Technology Co., Ltd. globalscale Globalscale Technologies, Inc. gmt Global Mixed-mode Technology, Inc. @@ -193,6 +194,7 @@ koe Kaohsiung Opto-Electronics Inc. kosagi Sutajio Ko-Usagi PTE Ltd. kyo Kyocera Corporation lacie LaCie +laird Laird PLC lantiq Lantiq Semiconductor lattice Lattice Semiconductor lego LEGO Systems A/S @@ -271,6 +273,7 @@ opalkelly Opal Kelly Incorporated opencores OpenCores.org openrisc OpenRISC.io option Option NV +oranth Shenzhen Oranth Technology Co., Ltd. ORCL Oracle Corporation orisetech Orise Technology ortustech Ortus Technology Co., Ltd. @@ -314,6 +317,7 @@ rohm ROHM Semiconductor Co., Ltd roofull Shenzhen Roofull Technology Co, Ltd samsung Samsung Semiconductor samtec Samtec/Softing company +sancloud Sancloud Ltd sandisk Sandisk Corporation sbs Smart Battery System schindler Schindler diff --git a/Documentation/driver-api/infrastructure.rst b/Documentation/driver-api/infrastructure.rst index bee1b9a1702f..6172f3cc3d0b 100644 --- a/Documentation/driver-api/infrastructure.rst +++ b/Documentation/driver-api/infrastructure.rst @@ -49,10 +49,10 @@ Device Drivers Base Device Drivers DMA Management ----------------------------- -.. kernel-doc:: drivers/base/dma-coherent.c +.. kernel-doc:: kernel/dma/coherent.c :export: -.. kernel-doc:: drivers/base/dma-mapping.c +.. kernel-doc:: kernel/dma/mapping.c :export: Device drivers PnP support diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index 2c391338c675..37bf0a9de75c 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -441,8 +441,6 @@ prototypes: int (*iterate) (struct file *, struct dir_context *); int (*iterate_shared) (struct file *, struct dir_context *); __poll_t (*poll) (struct file *, struct poll_table_struct *); - struct wait_queue_head * (*get_poll_head)(struct file *, __poll_t); - __poll_t (*poll_mask) (struct file *, __poll_t); long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long); long (*compat_ioctl) (struct file *, unsigned int, unsigned long); int (*mmap) (struct file *, struct vm_area_struct *); @@ -473,7 +471,7 @@ prototypes: }; locking rules: - All except for ->poll_mask may block. + All may block. ->llseek() locking has moved from llseek to the individual llseek implementations. If your fs is not using generic_file_llseek, you @@ -505,9 +503,6 @@ in sys_read() and friends. the lease within the individual filesystem to record the result of the operation -->poll_mask can be called with or without the waitqueue lock for the waitqueue -returned from ->get_poll_head. - --------------------------- dquot_operations ------------------------------- prototypes: int (*write_dquot) (struct dquot *); diff --git a/Documentation/filesystems/cifs/AUTHORS b/Documentation/filesystems/cifs/AUTHORS index 9f4f87e16240..75865da2ce14 100644 --- a/Documentation/filesystems/cifs/AUTHORS +++ b/Documentation/filesystems/cifs/AUTHORS @@ -42,9 +42,11 @@ Jeff Layton (many, many fixes, as well as great work on the cifs Kerberos code) Scott Lovenberg Pavel Shilovsky (for great work adding SMB2 support, and various SMB3 features) Aurelien Aptel (for DFS SMB3 work and some key bug fixes) -Ronnie Sahlberg (for SMB3 xattr work and bug fixes) +Ronnie Sahlberg (for SMB3 xattr work, bug fixes, and lots of great work on compounding) Shirish Pargaonkar (for many ACL patches over the years) Sachin Prabhu (many bug fixes, including for reconnect, copy offload and security) +Paulo Alcantara +Long Li (some great work on RDMA, SMB Direct) Test case and Bug Report contributors @@ -58,5 +60,4 @@ mention to the Stanford Checker (SWAT) which pointed out many minor bugs in error paths. Valuable suggestions also have come from Al Viro and Dave Miller. -And thanks to the IBM LTC and Power test teams and SuSE testers for -finding multiple bugs during excellent stress test runs. +And thanks to the IBM LTC and Power test teams and SuSE and Citrix and RedHat testers for finding multiple bugs during excellent stress test runs. diff --git a/Documentation/filesystems/cifs/CHANGES b/Documentation/filesystems/cifs/CHANGES index bc0025cdd1c9..455e1cc494a9 100644 --- a/Documentation/filesystems/cifs/CHANGES +++ b/Documentation/filesystems/cifs/CHANGES @@ -1,3 +1,6 @@ +See https://wiki.samba.org/index.php/LinuxCIFSKernel for +more current information. + Version 1.62 ------------ Add sockopt=TCP_NODELAY mount option. EA (xattr) routines hardened diff --git a/Documentation/filesystems/cifs/TODO b/Documentation/filesystems/cifs/TODO index c5adf149b57f..852499aed64b 100644 --- a/Documentation/filesystems/cifs/TODO +++ b/Documentation/filesystems/cifs/TODO @@ -9,14 +9,14 @@ is a partial list of the known problems and missing features: a) SMB3 (and SMB3.02) missing optional features: - multichannel (started), integration with RDMA - - directory leases (improved metadata caching) - - T10 copy offload (copy chunk, and "Duplicate Extents" ioctl + - directory leases (improved metadata caching), started (root dir only) + - T10 copy offload ie "ODX" (copy chunk, and "Duplicate Extents" ioctl currently the only two server side copy mechanisms supported) b) improved sparse file support c) Directory entry caching relies on a 1 second timer, rather than -using Directory Leases +using Directory Leases, currently only the root file handle is cached longer d) quota support (needs minor kernel change since quota calls to make it to network filesystems or deviceless filesystems) @@ -42,6 +42,8 @@ mount or a per server basis to client UIDs or nobody if no mapping exists. Also better integration with winbind for resolving SID owners k) Add tools to take advantage of more smb3 specific ioctls and features +(passthrough ioctl/fsctl for sending various SMB3 fsctls to the server +is in progress) l) encrypted file support @@ -71,9 +73,8 @@ t) split cifs and smb3 support into separate modules so legacy (and less secure) CIFS dialect can be disabled in environments that don't need it and simplify the code. -u) Finish up SMB3.1.1 dialect support - -v) POSIX Extensions for SMB3.1.1 +v) POSIX Extensions for SMB3.1.1 (started, create and mkdir support added +so far). KNOWN BUGS ==================================== @@ -92,8 +93,8 @@ Misc testing to do 1) check out max path names and max path name components against various server types. Try nested symlinks (8 deep). Return max path name in stat -f information -2) Improve xfstest's cifs enablement and adapt xfstests where needed to test -cifs better +2) Improve xfstest's cifs/smb3 enablement and adapt xfstests where needed to test +cifs/smb3 better 3) Additional performance testing and optimization using iozone and similar - there are some easy changes that can be done to parallelize sequential writes, diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index 829a7b7857a4..f608180ad59d 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -857,8 +857,6 @@ struct file_operations { ssize_t (*write_iter) (struct kiocb *, struct iov_iter *); int (*iterate) (struct file *, struct dir_context *); __poll_t (*poll) (struct file *, struct poll_table_struct *); - struct wait_queue_head * (*get_poll_head)(struct file *, __poll_t); - __poll_t (*poll_mask) (struct file *, __poll_t); long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long); long (*compat_ioctl) (struct file *, unsigned int, unsigned long); int (*mmap) (struct file *, struct vm_area_struct *); @@ -903,17 +901,6 @@ otherwise noted. activity on this file and (optionally) go to sleep until there is activity. Called by the select(2) and poll(2) system calls - get_poll_head: Returns the struct wait_queue_head that callers can - wait on. Callers need to check the returned events using ->poll_mask - once woken. Can return NULL to indicate polling is not supported, - or any error code using the ERR_PTR convention to indicate that a - grave error occured and ->poll_mask shall not be called. - - poll_mask: return the mask of EPOLL* values describing the file descriptor - state. Called either before going to sleep on the waitqueue returned by - get_poll_head, or after it has been woken. If ->get_poll_head and - ->poll_mask are implemented ->poll does not need to be implement. - unlocked_ioctl: called by the ioctl(2) system call. compat_ioctl: called by the ioctl(2) system call when 32 bit system calls diff --git a/Documentation/kbuild/kconfig-language.txt b/Documentation/kbuild/kconfig-language.txt index 3534a84d206c..64e0775a62d4 100644 --- a/Documentation/kbuild/kconfig-language.txt +++ b/Documentation/kbuild/kconfig-language.txt @@ -430,6 +430,12 @@ This sets the config program's title bar if the config program chooses to use it. It should be placed at the top of the configuration, before any other statement. +'#' Kconfig source file comment: + +An unquoted '#' character anywhere in a source file line indicates +the beginning of a source file comment. The remainder of that line +is a comment. + Kconfig hints ------------- diff --git a/Documentation/networking/e100.rst b/Documentation/networking/e100.rst index d4d837027925..9708f5fa76de 100644 --- a/Documentation/networking/e100.rst +++ b/Documentation/networking/e100.rst @@ -1,3 +1,4 @@ +============================================================== Linux* Base Driver for the Intel(R) PRO/100 Family of Adapters ============================================================== @@ -86,83 +87,84 @@ Event Log Message Level: The driver uses the message level flag to log events Additional Configurations ========================= - Configuring the Driver on Different Distributions - ------------------------------------------------- +Configuring the Driver on Different Distributions +------------------------------------------------- - Configuring a network driver to load properly when the system is started is - distribution dependent. Typically, the configuration process involves adding - an alias line to /etc/modprobe.d/*.conf as well as editing other system - startup scripts and/or configuration files. Many popular Linux - distributions ship with tools to make these changes for you. To learn the - proper way to configure a network device for your system, refer to your - distribution documentation. If during this process you are asked for the - driver or module name, the name for the Linux Base Driver for the Intel - PRO/100 Family of Adapters is e100. +Configuring a network driver to load properly when the system is started +is distribution dependent. Typically, the configuration process involves +adding an alias line to /etc/modprobe.d/*.conf as well as editing other +system startup scripts and/or configuration files. Many popular Linux +distributions ship with tools to make these changes for you. To learn +the proper way to configure a network device for your system, refer to +your distribution documentation. If during this process you are asked +for the driver or module name, the name for the Linux Base Driver for +the Intel PRO/100 Family of Adapters is e100. - As an example, if you install the e100 driver for two PRO/100 adapters - (eth0 and eth1), add the following to a configuration file in /etc/modprobe.d/ +As an example, if you install the e100 driver for two PRO/100 adapters +(eth0 and eth1), add the following to a configuration file in +/etc/modprobe.d/:: alias eth0 e100 alias eth1 e100 - Viewing Link Messages - --------------------- - In order to see link messages and other Intel driver information on your - console, you must set the dmesg level up to six. This can be done by - entering the following on the command line before loading the e100 driver:: - - dmesg -n 6 +Viewing Link Messages +--------------------- - If you wish to see all messages issued by the driver, including debug - messages, set the dmesg level to eight. +In order to see link messages and other Intel driver information on your +console, you must set the dmesg level up to six. This can be done by +entering the following on the command line before loading the e100 +driver:: - NOTE: This setting is not saved across reboots. + dmesg -n 6 +If you wish to see all messages issued by the driver, including debug +messages, set the dmesg level to eight. - ethtool - ------- +NOTE: This setting is not saved across reboots. - The driver utilizes the ethtool interface for driver configuration and - diagnostics, as well as displaying statistical information. The ethtool - version 1.6 or later is required for this functionality. +ethtool +------- - The latest release of ethtool can be found from - https://www.kernel.org/pub/software/network/ethtool/ +The driver utilizes the ethtool interface for driver configuration and +diagnostics, as well as displaying statistical information. The ethtool +version 1.6 or later is required for this functionality. - Enabling Wake on LAN* (WoL) - --------------------------- - WoL is provided through the ethtool* utility. For instructions on enabling - WoL with ethtool, refer to the ethtool man page. +The latest release of ethtool can be found from +https://www.kernel.org/pub/software/network/ethtool/ - WoL will be enabled on the system during the next shut down or reboot. For - this driver version, in order to enable WoL, the e100 driver must be - loaded when shutting down or rebooting the system. +Enabling Wake on LAN* (WoL) +--------------------------- +WoL is provided through the ethtool* utility. For instructions on +enabling WoL with ethtool, refer to the ethtool man page. WoL will be +enabled on the system during the next shut down or reboot. For this +driver version, in order to enable WoL, the e100 driver must be loaded +when shutting down or rebooting the system. - NAPI - ---- +NAPI +---- - NAPI (Rx polling mode) is supported in the e100 driver. +NAPI (Rx polling mode) is supported in the e100 driver. - See https://wiki.linuxfoundation.org/networking/napi for more information - on NAPI. +See https://wiki.linuxfoundation.org/networking/napi for more +information on NAPI. - Multiple Interfaces on Same Ethernet Broadcast Network - ------------------------------------------------------ +Multiple Interfaces on Same Ethernet Broadcast Network +------------------------------------------------------ - Due to the default ARP behavior on Linux, it is not possible to have - one system on two IP networks in the same Ethernet broadcast domain - (non-partitioned switch) behave as expected. All Ethernet interfaces - will respond to IP traffic for any IP address assigned to the system. - This results in unbalanced receive traffic. +Due to the default ARP behavior on Linux, it is not possible to have one +system on two IP networks in the same Ethernet broadcast domain +(non-partitioned switch) behave as expected. All Ethernet interfaces +will respond to IP traffic for any IP address assigned to the system. +This results in unbalanced receive traffic. - If you have multiple interfaces in a server, either turn on ARP - filtering by +If you have multiple interfaces in a server, either turn on ARP +filtering by - (1) entering:: echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter - (this only works if your kernel's version is higher than 2.4.5), or +(1) entering:: echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter + (this only works if your kernel's version is higher than 2.4.5), or - (2) installing the interfaces in separate broadcast domains (either - in different switches or in a switch partitioned to VLANs). +(2) installing the interfaces in separate broadcast domains (either + in different switches or in a switch partitioned to VLANs). Support diff --git a/Documentation/networking/e1000.rst b/Documentation/networking/e1000.rst index 616848940e63..144b87eef153 100644 --- a/Documentation/networking/e1000.rst +++ b/Documentation/networking/e1000.rst @@ -1,3 +1,4 @@ +=========================================================== Linux* Base Driver for Intel(R) Ethernet Network Connection =========================================================== @@ -354,57 +355,58 @@ previously mentioned to force the adapter to the same speed and duplex. Additional Configurations ========================= - Jumbo Frames - ------------ - Jumbo Frames support is enabled by changing the MTU to a value larger than - the default of 1500. Use the ifconfig command to increase the MTU size. - For example:: +Jumbo Frames +------------ +Jumbo Frames support is enabled by changing the MTU to a value larger +than the default of 1500. Use the ifconfig command to increase the MTU +size. For example:: ifconfig eth<x> mtu 9000 up - This setting is not saved across reboots. It can be made permanent if - you add:: +This setting is not saved across reboots. It can be made permanent if +you add:: MTU=9000 - to the file /etc/sysconfig/network-scripts/ifcfg-eth<x>. This example - applies to the Red Hat distributions; other distributions may store this - setting in a different location. +to the file /etc/sysconfig/network-scripts/ifcfg-eth<x>. This example +applies to the Red Hat distributions; other distributions may store this +setting in a different location. + +Notes: Degradation in throughput performance may be observed in some +Jumbo frames environments. If this is observed, increasing the +application's socket buffer size and/or increasing the +/proc/sys/net/ipv4/tcp_*mem entry values may help. See the specific +application manual and /usr/src/linux*/Documentation/ +networking/ip-sysctl.txt for more details. - Notes: - Degradation in throughput performance may be observed in some Jumbo frames - environments. If this is observed, increasing the application's socket buffer - size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values may help. - See the specific application manual and /usr/src/linux*/Documentation/ - networking/ip-sysctl.txt for more details. +- The maximum MTU setting for Jumbo Frames is 16110. This value + coincides with the maximum Jumbo Frames size of 16128. - - The maximum MTU setting for Jumbo Frames is 16110. This value coincides - with the maximum Jumbo Frames size of 16128. +- Using Jumbo frames at 10 or 100 Mbps is not supported and may result + in poor performance or loss of link. - - Using Jumbo frames at 10 or 100 Mbps is not supported and may result in - poor performance or loss of link. +- Adapters based on the Intel(R) 82542 and 82573V/E controller do not + support Jumbo Frames. These correspond to the following product names: + Intel(R) PRO/1000 Gigabit Server Adapter Intel(R) PRO/1000 PM Network + Connection - - Adapters based on the Intel(R) 82542 and 82573V/E controller do not - support Jumbo Frames. These correspond to the following product names: - Intel(R) PRO/1000 Gigabit Server Adapter - Intel(R) PRO/1000 PM Network Connection +ethtool +------- +The driver utilizes the ethtool interface for driver configuration and +diagnostics, as well as displaying statistical information. The ethtool +version 1.6 or later is required for this functionality. - ethtool - ------- - The driver utilizes the ethtool interface for driver configuration and - diagnostics, as well as displaying statistical information. The ethtool - version 1.6 or later is required for this functionality. +The latest release of ethtool can be found from +https://www.kernel.org/pub/software/network/ethtool/ - The latest release of ethtool can be found from - https://www.kernel.org/pub/software/network/ethtool/ +Enabling Wake on LAN* (WoL) +--------------------------- +WoL is configured through the ethtool* utility. - Enabling Wake on LAN* (WoL) - --------------------------- - WoL is configured through the ethtool* utility. +WoL will be enabled on the system during the next shut down or reboot. +For this driver version, in order to enable WoL, the e1000 driver must be +loaded when shutting down or rebooting the system. - WoL will be enabled on the system during the next shut down or reboot. - For this driver version, in order to enable WoL, the e1000 driver must be - loaded when shutting down or rebooting the system. Support ======= diff --git a/Documentation/networking/strparser.txt b/Documentation/networking/strparser.txt index 13081b3decef..a7d354ddda7b 100644 --- a/Documentation/networking/strparser.txt +++ b/Documentation/networking/strparser.txt @@ -48,7 +48,7 @@ void strp_pause(struct strparser *strp) Temporarily pause a stream parser. Message parsing is suspended and no new messages are delivered to the upper layer. -void strp_pause(struct strparser *strp) +void strp_unpause(struct strparser *strp) Unpause a paused stream parser. diff --git a/Documentation/trace/histogram.txt b/Documentation/trace/histogram.txt index e73bcf9cb5f3..7ffea6aa22e3 100644 --- a/Documentation/trace/histogram.txt +++ b/Documentation/trace/histogram.txt @@ -1729,35 +1729,35 @@ If a variable isn't a key variable or prefixed with 'vals=', the associated event field will be saved in a variable but won't be summed as a value: - # echo 'hist:keys=next_pid:ts1=common_timestamp ... >> event/trigger + # echo 'hist:keys=next_pid:ts1=common_timestamp ...' >> event/trigger Multiple variables can be assigned at the same time. The below would result in both ts0 and b being created as variables, with both common_timestamp and field1 additionally being summed as values: - # echo 'hist:keys=pid:vals=$ts0,$b:ts0=common_timestamp,b=field1 ... >> \ + # echo 'hist:keys=pid:vals=$ts0,$b:ts0=common_timestamp,b=field1 ...' >> \ event/trigger Note that variable assignments can appear either preceding or following their use. The command below behaves identically to the command above: - # echo 'hist:keys=pid:ts0=common_timestamp,b=field1:vals=$ts0,$b ... >> \ + # echo 'hist:keys=pid:ts0=common_timestamp,b=field1:vals=$ts0,$b ...' >> \ event/trigger Any number of variables not bound to a 'vals=' prefix can also be assigned by simply separating them with colons. Below is the same thing but without the values being summed in the histogram: - # echo 'hist:keys=pid:ts0=common_timestamp:b=field1 ... >> event/trigger + # echo 'hist:keys=pid:ts0=common_timestamp:b=field1 ...' >> event/trigger Variables set as above can be referenced and used in expressions on another event. For example, here's how a latency can be calculated: - # echo 'hist:keys=pid,prio:ts0=common_timestamp ... >> event1/trigger - # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp-$ts0 ... >> event2/trigger + # echo 'hist:keys=pid,prio:ts0=common_timestamp ...' >> event1/trigger + # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp-$ts0 ...' >> event2/trigger In the first line above, the event's timetamp is saved into the variable ts0. In the next line, ts0 is subtracted from the second @@ -1766,7 +1766,7 @@ yet another variable, 'wakeup_lat'. The hist trigger below in turn makes use of the wakeup_lat variable to compute a combined latency using the same key and variable from yet another event: - # echo 'hist:key=pid:wakeupswitch_lat=$wakeup_lat+$switchtime_lat ... >> event3/trigger + # echo 'hist:key=pid:wakeupswitch_lat=$wakeup_lat+$switchtime_lat ...' >> event3/trigger 2.2.2 Synthetic Events ---------------------- @@ -1807,10 +1807,11 @@ the command that defined it with a '!': At this point, there isn't yet an actual 'wakeup_latency' event instantiated in the event subsytem - for this to happen, a 'hist trigger action' needs to be instantiated and bound to actual fields -and variables defined on other events (see Section 6.3.3 below). +and variables defined on other events (see Section 2.2.3 below on +how that is done using hist trigger 'onmatch' action). Once that is +done, the 'wakeup_latency' synthetic event instance is created. -Once that is done, an event instance is created, and a histogram can -be defined using it: +A histogram can now be defined for the new synthetic event: # echo 'hist:keys=pid,prio,lat.log2:sort=pid,lat' >> \ /sys/kernel/debug/tracing/events/synthetic/wakeup_latency/trigger @@ -1960,7 +1961,7 @@ hist trigger specification. back to that pid, the timestamp difference is calculated. If the resulting latency, stored in wakeup_lat, exceeds the current maximum latency, the values specified in the save() fields are - recoreded: + recorded: # echo 'hist:keys=pid:ts0=common_timestamp.usecs \ if comm=="cyclictest"' >> \ diff --git a/Documentation/usb/gadget_configfs.txt b/Documentation/usb/gadget_configfs.txt index 635e57493709..b8cb38a98c19 100644 --- a/Documentation/usb/gadget_configfs.txt +++ b/Documentation/usb/gadget_configfs.txt @@ -226,7 +226,7 @@ $ rm configs/<config name>.<number>/<function> where <config name>.<number> specify the configuration and <function> is a symlink to a function being removed from the configuration, e.g.: -$ rm configfs/c.1/ncm.usb0 +$ rm configs/c.1/ncm.usb0 ... ... diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index 495b7742ab58..d10944e619d3 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -4610,7 +4610,7 @@ This capability indicates that kvm will implement the interfaces to handle reset, migration and nested KVM for branch prediction blocking. The stfle facility 82 should not be provided to the guest without this capability. -8.14 KVM_CAP_HYPERV_TLBFLUSH +8.18 KVM_CAP_HYPERV_TLBFLUSH Architectures: x86 diff --git a/MAINTAINERS b/MAINTAINERS index 9d5eeff51b5f..8a1023de4abd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1969,6 +1969,7 @@ S: Supported F: arch/arm/boot/dts/emev2* F: arch/arm/boot/dts/r7s* F: arch/arm/boot/dts/r8a* +F: arch/arm/boot/dts/r9a* F: arch/arm/boot/dts/sh* F: arch/arm/configs/shmobile_defconfig F: arch/arm/include/debug/renesas-scif.S @@ -2087,6 +2088,15 @@ L: linux-kernel@vger.kernel.org S: Maintained F: drivers/memory/*emif* +ARM/TEXAS INSTRUMENTS K3 ARCHITECTURE +M: Tero Kristo <t-kristo@ti.com> +M: Nishanth Menon <nm@ti.com> +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Supported +F: Documentation/devicetree/bindings/arm/ti/k3.txt +F: arch/arm64/boot/dts/ti/Makefile +F: arch/arm64/boot/dts/ti/k3-* + ARM/TEXAS INSTRUMENT KEYSTONE ARCHITECTURE M: Santosh Shilimkar <ssantosh@kernel.org> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -2971,9 +2981,13 @@ N: bcm585* N: bcm586* N: bcm88312 N: hr2 -F: arch/arm64/boot/dts/broadcom/ns2* +N: stingray +F: arch/arm64/boot/dts/broadcom/northstar2/* +F: arch/arm64/boot/dts/broadcom/stingray/* F: drivers/clk/bcm/clk-ns* +F: drivers/clk/bcm/clk-sr* F: drivers/pinctrl/bcm/pinctrl-ns* +F: include/dt-bindings/clock/bcm-sr* BROADCOM KONA GPIO DRIVER M: Ray Jui <rjui@broadcom.com> @@ -4360,12 +4374,7 @@ L: iommu@lists.linux-foundation.org T: git git://git.infradead.org/users/hch/dma-mapping.git W: http://git.infradead.org/users/hch/dma-mapping.git S: Supported -F: lib/dma-debug.c -F: lib/dma-direct.c -F: lib/dma-noncoherent.c -F: lib/dma-virt.c -F: drivers/base/dma-mapping.c -F: drivers/base/dma-coherent.c +F: kernel/dma/ F: include/asm-generic/dma-mapping.h F: include/linux/dma-direct.h F: include/linux/dma-mapping.h @@ -5674,7 +5683,7 @@ F: drivers/crypto/caam/ F: Documentation/devicetree/bindings/crypto/fsl-sec4.txt FREESCALE DIU FRAMEBUFFER DRIVER -M: Timur Tabi <timur@tabi.org> +M: Timur Tabi <timur@kernel.org> L: linux-fbdev@vger.kernel.org S: Maintained F: drivers/video/fbdev/fsl-diu-fb.* @@ -5774,7 +5783,7 @@ S: Maintained F: drivers/net/wan/fsl_ucc_hdlc* FREESCALE QUICC ENGINE UCC UART DRIVER -M: Timur Tabi <timur@tabi.org> +M: Timur Tabi <timur@kernel.org> L: linuxppc-dev@lists.ozlabs.org S: Maintained F: drivers/tty/serial/ucc_uart.c @@ -5798,7 +5807,7 @@ F: drivers/net/ethernet/freescale/fs_enet/ F: include/linux/fs_enet_pd.h FREESCALE SOC SOUND DRIVERS -M: Timur Tabi <timur@tabi.org> +M: Timur Tabi <timur@kernel.org> M: Nicolin Chen <nicoleotsuka@gmail.com> M: Xiubo Li <Xiubo.Lee@gmail.com> R: Fabio Estevam <fabio.estevam@nxp.com> @@ -9756,6 +9765,11 @@ L: linux-scsi@vger.kernel.org S: Maintained F: drivers/scsi/NCR_D700.* +NCSI LIBRARY: +M: Samuel Mendoza-Jonas <sam@mendozajonas.com> +S: Maintained +F: net/ncsi/ + NCT6775 HARDWARE MONITOR DRIVER M: Guenter Roeck <linux@roeck-us.net> L: linux-hwmon@vger.kernel.org @@ -9882,6 +9896,7 @@ M: Andrew Lunn <andrew@lunn.ch> M: Vivien Didelot <vivien.didelot@savoirfairelinux.com> M: Florian Fainelli <f.fainelli@gmail.com> S: Maintained +F: Documentation/devicetree/bindings/net/dsa/ F: net/dsa/ F: include/net/dsa.h F: include/linux/dsa/ @@ -11476,6 +11491,15 @@ W: http://wireless.kernel.org/en/users/Drivers/p54 S: Obsolete F: drivers/net/wireless/intersil/prism54/ +PROC FILESYSTEM +R: Alexey Dobriyan <adobriyan@gmail.com> +L: linux-kernel@vger.kernel.org +L: linux-fsdevel@vger.kernel.org +S: Maintained +F: fs/proc/ +F: include/linux/proc_fs.h +F: tools/testing/selftests/proc/ + PROC SYSCTL M: "Luis R. Rodriguez" <mcgrof@kernel.org> M: Kees Cook <keescook@chromium.org> @@ -11808,9 +11832,9 @@ F: Documentation/devicetree/bindings/opp/kryo-cpufreq.txt F: drivers/cpufreq/qcom-cpufreq-kryo.c QUALCOMM EMAC GIGABIT ETHERNET DRIVER -M: Timur Tabi <timur@codeaurora.org> +M: Timur Tabi <timur@kernel.org> L: netdev@vger.kernel.org -S: Supported +S: Maintained F: drivers/net/ethernet/qualcomm/emac/ QUALCOMM HEXAGON ARCHITECTURE @@ -13648,7 +13672,7 @@ M: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> L: iommu@lists.linux-foundation.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb.git S: Supported -F: lib/swiotlb.c +F: kernel/dma/swiotlb.c F: arch/*/kernel/pci-swiotlb.c F: include/linux/swiotlb.h @@ -15572,9 +15596,17 @@ M: x86@kernel.org L: linux-kernel@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/core S: Maintained +F: Documentation/devicetree/bindings/x86/ F: Documentation/x86/ F: arch/x86/ +X86 ENTRY CODE +M: Andy Lutomirski <luto@kernel.org> +L: linux-kernel@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/asm +S: Maintained +F: arch/x86/entry/ + X86 MCE INFRASTRUCTURE M: Tony Luck <tony.luck@intel.com> M: Borislav Petkov <bp@alien8.de> @@ -15597,7 +15629,7 @@ F: drivers/platform/x86/ F: drivers/platform/olpc/ X86 VDSO -M: Andy Lutomirski <luto@amacapital.net> +M: Andy Lutomirski <luto@kernel.org> L: linux-kernel@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/vdso S: Maintained @@ -2,7 +2,7 @@ VERSION = 4 PATCHLEVEL = 18 SUBLEVEL = 0 -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc3 NAME = Merciless Moray # *DOCUMENTATION* diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 0c4805a572c8..04a4a138ed13 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -555,11 +555,6 @@ config SMP If you don't know what to do here, say N. -config HAVE_DEC_LOCK - bool - depends on SMP - default y - config NR_CPUS int "Maximum number of CPUs (2-32)" range 2 32 diff --git a/arch/alpha/lib/Makefile b/arch/alpha/lib/Makefile index 04f9729de57c..854d5e79979e 100644 --- a/arch/alpha/lib/Makefile +++ b/arch/alpha/lib/Makefile @@ -35,8 +35,6 @@ lib-y = __divqu.o __remqu.o __divlu.o __remlu.o \ callback_srm.o srm_puts.o srm_printk.o \ fls.o -lib-$(CONFIG_SMP) += dec_and_lock.o - # The division routines are built from single source, with different defines. AFLAGS___divqu.o = -DDIV AFLAGS___remqu.o = -DREM diff --git a/arch/alpha/lib/dec_and_lock.c b/arch/alpha/lib/dec_and_lock.c deleted file mode 100644 index a117707f57fe..000000000000 --- a/arch/alpha/lib/dec_and_lock.c +++ /dev/null @@ -1,44 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * arch/alpha/lib/dec_and_lock.c - * - * ll/sc version of atomic_dec_and_lock() - * - */ - -#include <linux/spinlock.h> -#include <linux/atomic.h> -#include <linux/export.h> - - asm (".text \n\ - .global _atomic_dec_and_lock \n\ - .ent _atomic_dec_and_lock \n\ - .align 4 \n\ -_atomic_dec_and_lock: \n\ - .prologue 0 \n\ -1: ldl_l $1, 0($16) \n\ - subl $1, 1, $1 \n\ - beq $1, 2f \n\ - stl_c $1, 0($16) \n\ - beq $1, 4f \n\ - mb \n\ - clr $0 \n\ - ret \n\ -2: br $29, 3f \n\ -3: ldgp $29, 0($29) \n\ - br $atomic_dec_and_lock_1..ng \n\ - .subsection 2 \n\ -4: br 1b \n\ - .previous \n\ - .end _atomic_dec_and_lock"); - -static int __used atomic_dec_and_lock_1(atomic_t *atomic, spinlock_t *lock) -{ - /* Slow path */ - spin_lock(lock); - if (atomic_dec_and_test(atomic)) - return 1; - spin_unlock(lock); - return 0; -} -EXPORT_SYMBOL(_atomic_dec_and_lock); diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 54eeb8d00bc6..843edfd000be 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1245,8 +1245,14 @@ config PCI VESA. If you have PCI, say Y, otherwise N. config PCI_DOMAINS - bool + bool "Support for multiple PCI domains" depends on PCI + help + Enable PCI domains kernel management. Say Y if your machine + has a PCI bus hierarchy that requires more than one PCI + domain (aka segment) to be correctly managed. Say N otherwise. + + If you don't know what to do here, say N. config PCI_DOMAINS_GENERIC def_bool PCI_DOMAINS diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 37a3de760d40..c1eb84058039 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -38,6 +38,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ at91-ariettag25.dtb \ at91-cosino_mega2560.dtb \ at91-kizboxmini.dtb \ + at91-wb45n.dtb \ at91sam9g15ek.dtb \ at91sam9g25ek.dtb \ at91sam9g35ek.dtb \ @@ -50,7 +51,10 @@ dtb-$(CONFIG_SOC_SAM_V7) += \ at91-sama5d2_ptc_ek.dtb \ at91-sama5d2_xplained.dtb \ at91-sama5d3_xplained.dtb \ + at91-dvk_som60.dtb \ + at91-gatwick.dtb \ at91-tse850-3.dtb \ + at91-wb50n.dtb \ sama5d31ek.dtb \ sama5d33ek.dtb \ sama5d34ek.dtb \ @@ -73,6 +77,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ bcm2835-rpi-b-rev2.dtb \ bcm2835-rpi-b-plus.dtb \ bcm2835-rpi-a-plus.dtb \ + bcm2835-rpi-cm1-io1.dtb \ bcm2836-rpi-2-b.dtb \ bcm2837-rpi-3-b.dtb \ bcm2837-rpi-3-b-plus.dtb \ @@ -200,6 +205,7 @@ dtb-$(CONFIG_ARCH_GEMINI) += \ gemini-dlink-dns-313.dtb \ gemini-nas4220b.dtb \ gemini-rut1xx.dtb \ + gemini-sl93512r.dtb \ gemini-sq201.dtb \ gemini-wbd111.dtb \ gemini-wbd222.dtb @@ -345,7 +351,8 @@ dtb-$(CONFIG_SOC_IMX27) += \ imx27-phytec-phycore-rdk.dtb \ imx27-phytec-phycard-s-rdk.dtb dtb-$(CONFIG_SOC_IMX31) += \ - imx31-bug.dtb + imx31-bug.dtb \ + imx31-lite.dtb dtb-$(CONFIG_SOC_IMX35) += \ imx35-eukrea-mbimxsd35-baseboard.dtb \ imx35-pdk.dtb @@ -358,10 +365,14 @@ dtb-$(CONFIG_SOC_IMX51) += \ imx51-digi-connectcore-jsk.dtb \ imx51-eukrea-mbimxsd51-baseboard.dtb \ imx51-ts4800.dtb \ - imx51-zii-rdu1.dtb + imx51-zii-rdu1.dtb \ + imx51-zii-scu2-mezz.dtb \ + imx51-zii-scu3-esb.dtb dtb-$(CONFIG_SOC_IMX53) += \ imx53-ard.dtb \ imx53-cx9020.dtb \ + imx53-kp-ddc.dtb \ + imx53-kp-hsc.dtb \ imx53-m53evk.dtb \ imx53-mba53.dtb \ imx53-ppd.dtb \ @@ -400,6 +411,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-hummingboard2-emmc-som-v15.dtb \ imx6dl-hummingboard2-som-v15.dtb \ imx6dl-icore.dtb \ + imx6dl-icore-mipi.dtb \ imx6dl-icore-rqs.dtb \ imx6dl-mamoj.dtb \ imx6dl-nit6xlite.dtb \ @@ -521,6 +533,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ dtb-$(CONFIG_SOC_IMX6SL) += \ imx6sl-evk.dtb \ imx6sl-warp.dtb +dtb-$(CONFIG_SOC_IMX6SLL) += \ + imx6sll-evk.dtb dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-nitrogen6sx.dtb \ imx6sx-sabreauto.dtb \ @@ -533,6 +547,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-udoo-neo-full.dtb dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-14x14-evk.dtb \ + imx6ul-ccimx6ulsbcexpress.dtb \ imx6ul-geam.dtb \ imx6ul-isiot-emmc.dtb \ imx6ul-isiot-nand.dtb \ @@ -567,8 +582,10 @@ dtb-$(CONFIG_SOC_VF610) += \ vf610-cosmic.dtb \ vf610m4-cosmic.dtb \ vf610-twr.dtb \ + vf610-zii-cfu1.dtb \ vf610-zii-dev-rev-b.dtb \ - vf610-zii-dev-rev-c.dtb + vf610-zii-dev-rev-c.dtb \ + vf610-zii-ssmb-spu3.dtb dtb-$(CONFIG_ARCH_MXS) += \ imx23-evk.dtb \ imx23-olinuxino.dtb \ @@ -695,10 +712,12 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-pepper.dtb \ am335x-phycore-rdk.dtb \ am335x-pocketbeagle.dtb \ + am335x-sancloud-bbe.dtb \ am335x-shc.dtb \ am335x-sbc-t335.dtb \ am335x-sl50.dtb \ - am335x-wega-rdk.dtb + am335x-wega-rdk.dtb \ + am335x-osd3358-sm-red.dtb dtb-$(CONFIG_ARCH_OMAP4) += \ omap4-droid4-xt894.dtb \ omap4-duovero-parlor.dtb \ @@ -819,6 +838,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \ r8a7793-gose.dtb \ r8a7794-alt.dtb \ r8a7794-silk.dtb \ + r9a06g032-rzn1d400-db.dtb \ sh73a0-kzm9g.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rv1108-evb.dtb \ @@ -859,6 +879,8 @@ dtb-$(CONFIG_ARCH_S3C64XX) += \ s3c6410-smdk6410.dtb dtb-$(CONFIG_ARCH_S5PV210) += \ s5pv210-aquila.dtb \ + s5pv210-fascinate4g.dtb \ + s5pv210-galaxys.dtb \ s5pv210-goni.dtb \ s5pv210-smdkc110.dtb \ s5pv210-smdkv210.dtb \ @@ -1039,7 +1061,7 @@ dtb-$(CONFIG_ARCH_TANGO) += \ tango4-vantage-1172.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \ tegra20-harmony.dtb \ - tegra20-iris-512.dtb \ + tegra20-colibri-iris.dtb \ tegra20-medcom-wide.dtb \ tegra20-paz00.dtb \ tegra20-plutux.dtb \ @@ -1109,6 +1131,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \ zynq-zc770-xm012.dtb \ zynq-zc770-xm013.dtb \ zynq-zed.dtb \ + zynq-zturn.dtb \ zynq-zybo.dtb \ zynq-zybo-z7.dtb dtb-$(CONFIG_MACH_ARMADA_370) += \ @@ -1138,6 +1161,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \ armada-388-clearfog-pro.dtb \ armada-388-db.dtb \ armada-388-gp.dtb \ + armada-388-helios4.dtb \ armada-388-rd.dtb dtb-$(CONFIG_MACH_ARMADA_39X) += \ armada-398-db.dtb diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi index ed7a5a3daa42..8c6fc4161ad7 100644 --- a/arch/arm/boot/dts/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/am335x-baltos.dtsi @@ -396,7 +396,7 @@ compatible = "ti,wl1835"; reg = <2>; interrupt-parent = <&gpio3>; - interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; }; }; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 1356fd6f8da3..c87d01297a01 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -778,7 +778,7 @@ compatible = "ti,wl1835"; reg = <2>; interrupt-parent = <&gpio3>; - interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <17 IRQ_TYPE_EDGE_RISING>; }; }; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 0c096a795e37..bf1a40e45c97 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -690,7 +690,7 @@ compatible = "ti,wl1271"; reg = <2>; interrupt-parent = <&gpio0>; - interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; /* gpio 31 */ + interrupts = <31 IRQ_TYPE_EDGE_RISING>; /* gpio 31 */ ref-clock-frequency = <38400000>; }; }; diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts new file mode 100755 index 000000000000..4d969013f99a --- /dev/null +++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts @@ -0,0 +1,457 @@ +//SPDX-License-Identifier: GPL-2.0 +/* Copyright (C) 2018 Octavo Systems LLC - http://www.octavosystems.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-osd335x-common.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> + +#include <dt-bindings/display/tda998x.h> + +/ { + model = "Octavo Systems OSD3358-SM-RED"; + compatible = "oct,osd3358-sm-refdesign", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&am33xx_pinmux { + nxp_hdmi_bonelt_pins: nxp-hdmi-bonelt-pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + + nxp_hdmi_bonelt_off_pins: nxp-hdmi-bonelt-off-pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + >; + }; + + mcasp0_pins: mcasp0-pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ + AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/ + AM33XX_IOPAD(0x994, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ + AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ + AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */ + >; + }; + + flash_enable: flash-enable { + pinctrl-single,pins = < + AM33XX_IOPAD(0x944, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* rmii1_ref_clk.gpio0_29 */ + >; + }; + + imu_interrupt: imu-interrupt { + pinctrl-single,pins = < + AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) /* mii1_rx_er.gpio3_2 */ + >; + }; + + ethernet_interrupt: ethernet-interrupt{ + pinctrl-single,pins = < + AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7) /* mii1_col.gpio3_0 */ + >; + }; +}; + +&lcdc { + status = "okay"; + + /* If you want to get 24 bit RGB and 16 BGR mode instead of + * current 16 bit RGB and 24 BGR modes, set the propety + * below to "crossed" and uncomment the video-ports -property + * in tda19988 node. + * AM335x errata for wiring: + * http://www.ti.com/lit/er/sprz360i/sprz360i.pdf + */ + + blue-and-red-wiring = "straight"; + + port { + lcdc_0: endpoint { + remote-endpoint = <&hdmi_0>; + }; + }; +}; + +&i2c0 { + tda19988: hdmi-encoder@70 { + compatible = "nxp,tda998x"; + reg = <0x70>; + + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + + /* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */ + /* video-ports = <0x234501>; */ + + #sound-dai-cells = <0>; + audio-ports = < TDA998x_I2S 0x03>; + + port { + hdmi_0: endpoint { + remote-endpoint = <&lcdc_0>; + }; + }; + }; + + mpu9250: imu@68 { + compatible = "invensense,mpu6050"; + reg = <0x68>; + interrupt-parent = <&gpio3>; + interrupts = <21 IRQ_TYPE_EDGE_RISING>; + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + ax8975@c { + compatible = "ak,ak8975"; + reg = <0x0c>; + }; + }; + /*invensense,int_config = <0x10>; + invensense,level_shifter = <0>; + invensense,orientation = [01 00 00 00 01 00 00 00 01]; + invensense,sec_slave_type = <0>; + invensense,key = [4e cc 7e eb f6 1e 35 22 00 34 0d 65 32 e9 94 89];*/ + }; + + bmp280: pressure@78 { + compatible = "bosch,bmp280"; + reg = <0x76>; + }; +}; + +&rtc { + system-power-controller; +}; + +&mcasp0 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcasp0_pins>; + status = "okay"; + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 1 0 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; +}; + +/ { + clk_mcasp0_fixed: clk-mcasp0-fixed { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24576000>; + }; + + clk_mcasp0: clk-mcasp0 { + #clock-cells = <0>; + compatible = "gpio-gate-clock"; + clocks = <&clk_mcasp0_fixed>; + enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */ + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "TI BeagleBone Black"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink0_master>; + simple-audio-card,frame-master = <&dailink0_master>; + + dailink0_master: simple-audio-card,cpu { + sound-dai = <&mcasp0>; + clocks = <&clk_mcasp0>; + }; + + simple-audio-card,codec { + sound-dai = <&tda19988>; + }; + }; + + chosen { + stdout-path = &uart0; + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0>; + + compatible = "gpio-leds"; + + led2 { + label = "beaglebone:green:usr0"; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led3 { + label = "beaglebone:green:usr1"; + gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led4 { + label = "beaglebone:green:usr2"; + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + + led5 { + label = "beaglebone:green:usr3"; + gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + }; + + vmmcsd_fixed: fixedregulator0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&clkout2_pin>; + + user_leds_s0: user-leds-s0 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ + AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ + AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ + >; + }; + + i2c2_pins: pinmux-i2c2-pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ + AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */ + >; + }; + + uart0_pins: pinmux-uart0-pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + clkout2_pin: pinmux-clkout2-pin { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + >; + }; + + cpsw_default: cpsw-default { + pinctrl-single,pins = < + /* Slave 1 */ + AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_txd3 */ + AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_txd2 */ + AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */ + AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */ + AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_txclk */ + AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rxclk */ + AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rxd3 */ + AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rxd2 */ + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */ + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */ + >; + }; + + cpsw_sleep: cpsw-sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci-mdio-default { + pinctrl-single,pins = < + /* MDIO */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci-mdio-sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + mmc1_pins: pinmux-mmc1-pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */ + AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */ + AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* (G15) mmc0_dat1.mmc0_dat1 */ + AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* (F18) mmc0_dat2.mmc0_dat2 */ + AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* (F17) mmc0_dat3.mmc0_dat3 */ + AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */ + AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */ + >; + }; + + emmc_pins: pinmux-emmc-pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + >; + }; +}; + + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "peripheral"; + interrupts-extended = <&intc 18 &tps 0>; + interrupt-names = "mc", "vbus"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; + +&cppi41dma { + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "okay"; + clock-frequency = <100000>; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <4>; + phy-mode = "rgmii-txid"; +}; + +&mac { + slaves = <1>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&mmc1 { + status = "okay"; + bus-width = <0x4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; +}; + +&rtc { + clocks = <&clk_32768_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; + clock-names = "ext-clk", "int-clk"; +}; diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe.dts b/arch/arm/boot/dts/am335x-sancloud-bbe.dts new file mode 100644 index 000000000000..7b8e7417a11e --- /dev/null +++ b/arch/arm/boot/dts/am335x-sancloud-bbe.dts @@ -0,0 +1,136 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" +#include "am335x-boneblack-common.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "SanCloud BeagleBone Enhanced"; + compatible = "sancloud,am335x-boneenhanced", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ + AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ + AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ + AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ + AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ + AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + usb_hub_ctrl: usb_hub_ctrl { + pinctrl-single,pins = < + AM33XX_IOPAD(0x944, PIN_OUTPUT_PULLUP | MUX_MODE7) /* rmii1_refclk.gpio0_29 */ + >; + }; + + mpu6050_pins: pinmux_mpu6050_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x968, PIN_INPUT | MUX_MODE7) /* uart0_ctsn.gpio1_8 */ + >; + }; + + lps3331ap_pins: pinmux_lps3331ap_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7) /* gpmc_a10.gpio1_26 */ + >; + }; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "rgmii-txid"; +}; + +&i2c0 { + lps331ap: barometer@5c { + compatible = "st,lps331ap-press"; + st,drdy-int-pin = <1>; + reg = <0x5c>; + interrupt-parent = <&gpio1>; + interrupts = <26 IRQ_TYPE_EDGE_RISING>; + }; + + mpu6050: accelerometer@68 { + compatible = "invensense,mpu6050"; + reg = <0x68>; + interrupt-parent = <&gpio0>; + interrupts = <2 IRQ_TYPE_EDGE_RISING>; + orientation = <0xff 0 0 0 1 0 0 0 0xff>; + }; + + usb2512b: usb-hub@2c { + compatible = "microchip,usb2512b"; + reg = <0x2c>; + reset-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; + /* wifi on port 4 */ + }; +}; diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts index 1bcc60424ecd..38d57b89f7d3 100644 --- a/arch/arm/boot/dts/am335x-sl50.dts +++ b/arch/arm/boot/dts/am335x-sl50.dts @@ -8,6 +8,8 @@ /dts-v1/; #include "am33xx.dtsi" +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Toby Churchill SL50 Series"; @@ -34,25 +36,25 @@ pinctrl-0 = <&led_pins>; led0 { - label = "sl50:green:usr0"; + label = "sl50:red:usr0"; gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; default-state = "off"; }; led1 { - label = "sl50:red:usr1"; + label = "sl50:green:usr1"; gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; default-state = "off"; }; led2 { - label = "sl50:green:usr2"; + label = "sl50:red:usr2"; gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; default-state = "off"; }; led3 { - label = "sl50:red:usr3"; + label = "sl50:green:usr3"; gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; default-state = "off"; }; @@ -60,16 +62,44 @@ backlight0: disp0 { compatible = "pwm-backlight"; - pwms = <&ehrpwm1 0 500000 0>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>; - default-brightness-level = <6>; + pinctrl-names = "default"; + pinctrl-0 = <&backlight0_pins>; + pwms = <&ehrpwm1 0 500000 PWM_POLARITY_INVERTED>; + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + enable-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>; + power-supply = <&vdd_sys_reg>; }; backlight1: disp1 { compatible = "pwm-backlight"; - pwms = <&ehrpwm1 1 500000 0>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>; - default-brightness-level = <6>; + pinctrl-names = "default"; + pinctrl-0 = <&backlight1_pins>; + pwms = <&ehrpwm1 1 500000 PWM_POLARITY_INVERTED>; + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + enable-gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; + power-supply = <&vdd_sys_reg>; }; clocks { @@ -78,27 +108,85 @@ #size-cells = <0>; /* audio external oscillator */ - tlv320aic3x_mclk: oscillator@0 { + audio_mclk_fixed: oscillator@0 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24576000>; /* 24.576MHz */ }; + + audio_mclk: audio_mclk_gate@0 { + compatible = "gpio-gate-clock"; + #clock-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&audio_mclk_pins>; + clocks = <&audio_mclk_fixed>; + enable-gpios = <&gpio1 27 0>; + }; + }; + + panel: lcd_panel { + compatible = "ti,tilcdc,panel"; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + + panel-info { + ac-bias = <255>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <16>; + fdd = <0x80>; + tft-alt-mode = <0>; + mono-8bit-mode = <0>; + sync-edge = <0>; + sync-ctrl = <1>; + raster-order = <0>; + fifo-th = <0>; + }; + + display-timings { + native-mode = <&timing0>; + timing0: 960x128 { + clock-frequency = <18000000>; + hactive = <960>; + vactive = <272>; + + hback-porch = <40>; + hfront-porch = <16>; + hsync-len = <24>; + hsync-active = <0>; + + vback-porch = <3>; + vfront-porch = <8>; + vsync-len = <4>; + vsync-active = <0>; + }; + }; }; sound { - compatible = "ti,da830-evm-audio"; - ti,model = "AM335x-SL50"; - ti,audio-codec = <&audio_codec>; - ti,mcasp-controller = <&mcasp0>; + compatible = "audio-graph-card"; + label = "sound-card"; + pinctrl-names = "default"; + pinctrl-0 = <&audio_pa_pins>; + + widgets = "Headphone", "Headphone Jack", + "Speaker", "Speaker External", + "Line", "Line In", + "Microphone", "Microphone Jack"; - clocks = <&tlv320aic3x_mclk>; - clock-names = "mclk"; + routing = "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "Amplifier", "MONO_LOUT", + "Speaker External", "Amplifier", + "LINE1R", "Line In", + "LINE1L", "Line In", + "MIC3L", "Microphone Jack", + "MIC3R", "Microphone Jack", + "Microphone Jack", "Mic Bias"; - ti,audio-routing = - "Headphone Jack", "HPLOUT", - "Headphone Jack", "HPROUT", - "LINE1R", "Line In", - "LINE1L", "Line In"; + dais = <&cpu_port>; + + pa-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; }; emmc_pwrseq: pwrseq@0 { @@ -108,6 +196,14 @@ reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; }; + vdd_sys_reg: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vdd_sys_reg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + vmmcsd_fixed: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; @@ -120,6 +216,65 @@ pinctrl-names = "default"; pinctrl-0 = <&lwb_pins>; + audio_pins: pinmux_audio_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ + AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ + AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ + AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */ + AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2 */ + >; + }; + + audio_pa_pins: pinmux_audio_pa_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* SoundPA_en - mcasp0_aclkr.gpio3_18 */ + >; + }; + + audio_mclk_pins: pinmux_audio_mclk_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.gpio1_27 */ + >; + }; + + backlight0_pins: pinmux_backlight0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE7) /* gpmc_wen.gpio2_4 */ + >; + }; + + backlight1_pins: pinmux_backlight1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7) /* gpmc_ad10.gpio0_26 */ + >; + }; + + lcd_pins: pinmux_lcd_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + led_pins: pinmux_led_pins { pinctrl-single,pins = < AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) /* gpmc_a5.gpio1_21 */ @@ -207,6 +362,8 @@ /* MDIO */ AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + /* Ethernet */ + AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE7) /* Ethernet_nRST - gpmc_ad14.gpio1_14 */ >; }; @@ -245,20 +402,16 @@ >; }; - audio_pins: pinmux_audio_pins { + ehrpwm1_pins: pinmux_ehrpwm1a_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ - AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ - AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ - AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */ - AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2 */ + AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE6) /* gpmc_a2.ehrpwm1a */ + AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6) /* gpmc_a3.ehrpwm1b */ >; }; - ehrpwm1_pins: pinmux_ehrpwm1a_pins { + rtc0_irq_pins: pinmux_rtc0_irq_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE6) /* gpmc_a2.ehrpwm1a */ - AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6) /* gpmc_a3.ehrpwm1b */ + AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ad9.gpio0_23 */ >; }; @@ -274,15 +427,18 @@ lwb_pins: pinmux_lwb_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9a4, PIN_OUTPUT | MUX_MODE7) /* SoundPA_en - mcasp0_fsr.gpio3_19 */ - AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7) /* nKbdOnC - gpmc_ad10.gpio0_26 */ AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE7) /* nKbdInt - gpmc_ad12.gpio1_12 */ AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE7) /* nKbdReset - gpmc_ad13.gpio1_13 */ - AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE7) /* nDispReset - gpmc_ad14.gpio1_14 */ AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7) /* USB1_enPower - gpmc_a1.gpio1_17 */ /* PDI Bus - Battery system */ AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7) /* nBattReset gpmc_a0.gpio1_16 */ AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE7) /* BattPDIData gpmc_ad15.gpio1_15 */ + /* FPGA */ + AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE7) /* FPGA_DONE - gpmc_ad8.gpio0_22 */ + AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7) /* FPGA_NRST - gpmc_a0.gpio1_16 */ + AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7) /* FPGA_RUN - gpmc_a1.gpio1_17 */ + AM33XX_IOPAD(0x864, PIN_INPUT_PULLUP | MUX_MODE7) /* ENFPGA - gpmc_a9.gpio1_25 */ + AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) /* FPGA_PROGRAM - gpmc_a10.gpio1_26 */ >; }; }; @@ -298,9 +454,14 @@ reg = <0x24>; }; - bq32000: rtc@68 { - compatible = "ti,bq32000"; - trickle-resistor-ohms = <1120>; + rtc0: rtc@68 { + compatible = "dallas,ds1339"; + pinctrl-names = "default"; + pinctrl-0 = <&rtc0_irq_pins>; + interrupt-parent = <&gpio0>; + interrupts = <23 IRQ_TYPE_EDGE_FALLING>; /* gpio 23 */ + wakeup-source; + trickle-resistor-ohms = <2000>; reg = <0x68>; }; @@ -326,12 +487,21 @@ audio_codec: tlv320aic3106@1b { status = "okay"; compatible = "ti,tlv320aic3106"; + #sound-dai-cells = <0>; reg = <0x1b>; + ai3x-micbias-vg = <2>; /* 2.5V */ AVDD-supply = <&ldo4_reg>; IOVDD-supply = <&ldo4_reg>; DRVDD-supply = <&ldo4_reg>; DVDD-supply = <&ldo3_reg>; + + codec_port: port { + codec_endpoint: endpoint { + remote-endpoint = <&cpu_endpoint>; + clocks = <&audio_mclk>; + }; + }; }; /* Ambient Light Sensor */ @@ -363,7 +533,7 @@ &usb0 { status = "okay"; - dr_mode = "peripheral"; + dr_mode = "otg"; }; &usb1 { @@ -397,17 +567,27 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&audio_pins>; - + #sound-dai-cells = <0>; op-mode = <0>; /* MCASP_ISS_MODE */ tdm-slots = <2>; - serial-dir = < - 2 0 1 0 - 0 0 0 0 - 0 0 0 0 - 0 0 0 0 + /* 4 serializers */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 1 2 >; - tx-num-evt = <1>; - rx-num-evt = <1>; + tx-num-evt = <32>; + rx-num-evt = <32>; + + cpu_port: port { + cpu_endpoint: endpoint { + remote-endpoint = <&codec_endpoint>; + + dai-format = "dsp_b"; + bitclock-master = <&codec_port>; + frame-master = <&codec_port>; + bitclock-inversion; + clocks = <&audio_mclk>; + }; + }; }; &uart0 { @@ -507,13 +687,8 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; - phy-mode = "mii"; -}; - -&cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; phy-mode = "mii"; + phy-handle = <ðphy0>; }; &mac { @@ -528,6 +703,12 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; + reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + reset-delay-us = <100>; /* PHY datasheet states 100us min */ + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; }; &sham { @@ -547,3 +728,15 @@ pinctrl-names = "default"; pinctrl-0 = <&ehrpwm1_pins>; }; + +&lcdc { + status = "okay"; +}; + +&tscadc { + status = "okay"; +}; + +&am335x_adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; +}; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 9cd62bc2ca35..d3dd6a16e70a 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -29,8 +29,8 @@ serial3 = &uart3; serial4 = &uart4; serial5 = &uart5; - d_can0 = &dcan0; - d_can1 = &dcan1; + d-can0 = &dcan0; + d-can1 = &dcan1; usb0 = &usb0; usb1 = &usb1; phy0 = &usb0_phy; diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index 98aadb0f81c5..1d158cfda15f 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -127,6 +127,7 @@ status = "okay"; pinctrl-names = "default"; enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; /* gpio176, lcd INI */ + vcc-supply = <&vdd_io_reg>; port { lcd_in: endpoint { @@ -154,6 +155,7 @@ bl: backlight { compatible = "pwm-backlight"; pinctrl-names = "default"; + power-supply = <&vdd_io_reg>; pinctrl-0 = <&backlight_pins>; pwms = <&pwm11 0 5000000 0>; brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; @@ -168,6 +170,13 @@ ti,timers = <&timer11>; #pwm-cells = <3>; }; + + /* HS USB Host PHY on PORT 1 */ + hsusb1_phy: hsusb1_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */ + #phy-cells = <0>; + }; }; &davinci_emac { @@ -203,6 +212,7 @@ reg = <0x21>; gpio-controller; #gpio-cells = <2>; + vcc-supply = <&vdd_io_reg>; }; }; @@ -220,15 +230,21 @@ cd-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio_127 */ }; -&mmc2 { +&mmc3 { status = "disabled"; }; -&mmc3 { - status = "disabled"; +&usbhshost { + port1-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <&hsusb1_phy>; }; &omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb1_rst_pins>; leds_pins: pinmux_leds_pins { pinctrl-single,pins = < @@ -287,4 +303,32 @@ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ >; }; + + hsusb1_rst_pins: pinmux_hsusb1_rst_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs6.gpio_57 */ + >; + }; +}; + +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb1_pins>; + + hsusb1_pins: pinmux_hsusb1_pins { + pinctrl-single,pins = < + OMAP3430_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */ + OMAP3430_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */ + OMAP3430_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3) /* etk_d8.hsusb1_dir */ + OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3) /* etk_d9.hsusb1_nxt */ + OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3) /* etk_d0.hsusb1_data0 */ + OMAP3430_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3) /* etk_d1.hsusb1_data1 */ + OMAP3430_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3) /* etk_d2.hsusb1_data2 */ + OMAP3430_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3) /* etk_d7.hsusb1_data3 */ + OMAP3430_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3) /* etk_d4.hsusb1_data4 */ + OMAP3430_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3) /* etk_d5.hsusb1_data5 */ + OMAP3430_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3) /* etk_d6.hsusb1_data6 */ + OMAP3430_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3) /* etk_d3.hsusb1_data7 */ + >; + }; }; diff --git a/arch/arm/boot/dts/am3517-som.dtsi b/arch/arm/boot/dts/am3517-som.dtsi index a6d5ff73c163..dae6e458e59f 100644 --- a/arch/arm/boot/dts/am3517-som.dtsi +++ b/arch/arm/boot/dts/am3517-som.dtsi @@ -14,6 +14,32 @@ cpu0-supply = <&vdd_core_reg>; }; }; + + wl12xx_buffer: wl12xx_buf { + compatible = "regulator-fixed"; + regulator-name = "wl1271_buf"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_buffer_pins>; + gpio = <&gpio5 1 GPIO_ACTIVE_LOW>; /* gpio 129 */ + regulator-always-on; + vin-supply = <&vdd_1v8_reg>; + }; + + wl12xx_vmmc2: wl12xx_vmmc2 { + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_wkup_pins>; + gpio = <&gpio1 3 GPIO_ACTIVE_HIGH >; /* gpio 3 */ + startup-delay-us = <70000>; + enable-active-high; + regulator-always-on; + vin-supply = <&wl12xx_buffer>; + }; }; &gpmc { @@ -64,7 +90,6 @@ regulators { vdd_core_reg: VDCDC1 { regulator-name = "vdd_core"; - compatible = "regulator-fixed"; regulator-always-on; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; @@ -72,7 +97,6 @@ vdd_io_reg: VDCDC2 { regulator-name = "vdd_io"; - compatible = "regulator-fixed"; regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -80,7 +104,6 @@ vdd_1v8_reg: VDCDC3 { regulator-name = "vdd_1v8"; - compatible = "regulator-fixed"; regulator-always-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -88,7 +111,6 @@ vdd_usb18_reg: LDO1 { regulator-name = "vdd_usb18"; - compatible = "regulator-fixed"; regulator-always-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -96,7 +118,6 @@ vdd_usb33_reg: LDO2 { regulator-name = "vdd_usb33"; - compatible = "regulator-fixed"; regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -126,8 +147,63 @@ }; }; +&mmc2 { + interrupts-extended = <&intc 86 /* &omap3_pmx_core 0x12c */>; + + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&wl12xx_vmmc2>; + non-removable; + bus-width = <4>; + cap-power-off-card; + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio6>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; /* gpio_170 */ + ref-clock-frequency = <26000000>; + tcxo-clock-frequency = <26000000>; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + + bluetooth { + compatible = "ti,wl1271-st"; + enable-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; /* gpio 56 */ + max-speed = <3000000>; + }; +}; + &omap3_pmx_core { + wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* mmc1_dat7.gpio_129 */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_clk.mmc2_clk */ + OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_cmd.mmc2_cmd */ + OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat0.mmc2_dat0 */ + OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat1.mmc2_dat1 */ + OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat2.mmc2_dat2 */ + OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat3.mmc2_dat3 */ + OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat4.mmc2_dir_dat0 */ + OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat5.mmc2_dir_dat1 */ + OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat6.mmc2_dir_cmd */ + OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1) /* mmc2_dat7.mmc2_clkin */ + OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE4) /* hdq_sio.gpio_170 */ + >; + }; + rtc_pins: pinmux_rtc_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20b6, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_ncs4.gpio_55 */ @@ -139,4 +215,23 @@ OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT | MUX_MODE4) /* gpmc_wait3.gpio_65 */ >; }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts */ + OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLUP | MUX_MODE0) /* uart2_rts */ + OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */ + OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */ + OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT | MUX_MODE0) /* gpio_56 */ + >; + }; +}; + +&omap3_pmx_wkup { + + wl12xx_wkup_pins: pinmux_wl12xx_wkup_pins { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */ + >; + }; }; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 60414b1ca404..5b97c20c5ed4 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -790,7 +790,7 @@ compatible = "ti,wl1835"; reg = <2>; interrupt-parent = <&gpio1>; - interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <23 IRQ_TYPE_EDGE_RISING>; }; }; diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts index 5bb9d68d6e90..d9a2049a1ea8 100644 --- a/arch/arm/boot/dts/am571x-idk.dts +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -66,10 +66,6 @@ }; }; -&omap_dwc3_2 { - extcon = <&extcon_usb2>; -}; - &extcon_usb2 { id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/am572x-idk-common.dtsi b/arch/arm/boot/dts/am572x-idk-common.dtsi index c6d858b31011..784639ddf451 100644 --- a/arch/arm/boot/dts/am572x-idk-common.dtsi +++ b/arch/arm/boot/dts/am572x-idk-common.dtsi @@ -57,10 +57,6 @@ }; }; -&omap_dwc3_2 { - extcon = <&extcon_usb2>; -}; - &extcon_usb2 { id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index ad87f1ae904d..c9063ffca524 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -395,8 +395,13 @@ dr_mode = "host"; }; +&omap_dwc3_2 { + extcon = <&extcon_usb2>; +}; + &usb2 { - dr_mode = "peripheral"; + extcon = <&extcon_usb2>; + dr_mode = "otg"; }; &mmc1 { diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/armada-385-synology-ds116.dts index 6782ce481ac9..d8769956cbfc 100644 --- a/arch/arm/boot/dts/armada-385-synology-ds116.dts +++ b/arch/arm/boot/dts/armada-385-synology-ds116.dts @@ -139,7 +139,7 @@ 3700 5 3900 6 4000 7>; - cooling-cells = <2>; + #cooling-cells = <2>; }; gpio-leds { diff --git a/arch/arm/boot/dts/armada-388-clearfog-base.dts b/arch/arm/boot/dts/armada-388-clearfog-base.dts index 50ed4ae5c621..53b4bd35522a 100644 --- a/arch/arm/boot/dts/armada-388-clearfog-base.dts +++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts @@ -3,11 +3,6 @@ * Device Tree file for SolidRun Clearfog Base revision A1 rev 2.0 (88F6828) * * Copyright (C) 2015 Russell King - * - * This board is in development; the contents of this file work with - * the A1 rev 2.0 of the board, which does not represent final - * production board. Things will change, don't expect this file to - * remain compatible info the future. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-388-clearfog-pro.dts b/arch/arm/boot/dts/armada-388-clearfog-pro.dts index 24e4b5a509be..ff890c09c3ed 100644 --- a/arch/arm/boot/dts/armada-388-clearfog-pro.dts +++ b/arch/arm/boot/dts/armada-388-clearfog-pro.dts @@ -3,11 +3,6 @@ * Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828) * * Copyright (C) 2015 Russell King - * - * This board is in development; the contents of this file work with - * the A1 rev 2.0 of the board, which does not represent final - * production board. Things will change, don't expect this file to - * remain compatible info the future. */ #include "armada-388-clearfog.dts" diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts index 5fd0f6f61e77..89a354b43978 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dts +++ b/arch/arm/boot/dts/armada-388-clearfog.dts @@ -3,11 +3,6 @@ * Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828) * * Copyright (C) 2015 Russell King - * - * This board is in development; the contents of this file work with - * the A1 rev 2.0 of the board, which does not represent final - * production board. Things will change, don't expect this file to - * remain compatible info the future. */ /dts-v1/; @@ -235,7 +230,7 @@ &spi1 { /* * Add SPI CS pins for clearfog: - * CS0: W25Q32 (not populated on uSOM) + * CS0: W25Q32 * CS1: * CS2: mikrobus */ diff --git a/arch/arm/boot/dts/armada-388-clearfog.dtsi b/arch/arm/boot/dts/armada-388-clearfog.dtsi index 0d9dfdfe977e..7c6ad2afb094 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dtsi +++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi @@ -3,11 +3,6 @@ * Device Tree include file for SolidRun Clearfog 88F6828 based boards * * Copyright (C) 2015 Russell King - * - * This board is in development; the contents of this file work with - * the A1 rev 2.0 of the board, which does not represent final - * production board. Things will change, don't expect this file to - * remain compatible info the future. */ #include "armada-388.dtsi" @@ -230,7 +225,7 @@ &spi1 { /* * Add SPI CS pins for clearfog: - * CS0: W25Q32 (not populated on uSOM) + * CS0: W25Q32 * CS1: PIC microcontroller (Pro models) * CS2: mikrobus */ diff --git a/arch/arm/boot/dts/armada-388-helios4.dts b/arch/arm/boot/dts/armada-388-helios4.dts new file mode 100644 index 000000000000..705adfa8c680 --- /dev/null +++ b/arch/arm/boot/dts/armada-388-helios4.dts @@ -0,0 +1,313 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Device Tree file for Helios4 + * based on SolidRun Clearfog revision A1 rev 2.0 (88F6828) + * + * Copyright (C) 2017 Aditya Prayoga <aditya@kobol.io> + * + */ + +/dts-v1/; +#include "armada-388.dtsi" +#include "armada-38x-solidrun-microsom.dtsi" + +/ { + model = "Helios4"; + compatible = "kobol,helios4", "marvell,armada388", + "marvell,armada385", "marvell,armada380"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x80000000>; /* 2 GB */ + }; + + aliases { + /* So that mvebu u-boot can update the MAC addresses */ + ethernet1 = ð0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_12v: regulator-12v { + compatible = "regulator-fixed"; + regulator-name = "power_brick_12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <®_12v>; + }; + + reg_5p0v_hdd: regulator-5v-hdd { + compatible = "regulator-fixed"; + regulator-name = "5V_HDD"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <®_12v>; + }; + + reg_5p0v_usb: regulator-5v-usb { + compatible = "regulator-fixed"; + regulator-name = "USB-PWR"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + enable-active-high; + gpio = <&expander0 6 GPIO_ACTIVE_HIGH>; + vin-supply = <®_12v>; + }; + + system-leds { + compatible = "gpio-leds"; + status-led { + label = "helios4:green:status"; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + + fault-led { + label = "helios4:red:fault"; + gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + }; + + io-leds { + compatible = "gpio-leds"; + sata1-led { + label = "helios4:green:ata1"; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + linux,default-trigger = "ata1"; + default-state = "off"; + }; + sata2-led { + label = "helios4:green:ata2"; + gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; + linux,default-trigger = "ata2"; + default-state = "off"; + }; + sata3-led { + label = "helios4:green:ata3"; + gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; + linux,default-trigger = "ata3"; + default-state = "off"; + }; + sata4-led { + label = "helios4:green:ata4"; + gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; + linux,default-trigger = "ata4"; + default-state = "off"; + }; + usb-led { + label = "helios4:green:usb"; + gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; + linux,default-trigger = "usb-host"; + default-state = "off"; + }; + }; + + fan1: j10-pwm { + compatible = "pwm-fan"; + pwms = <&gpio1 9 40000>; /* Target freq:25 kHz */ + }; + + fan2: j17-pwm { + compatible = "pwm-fan"; + pwms = <&gpio1 23 40000>; /* Target freq:25 kHz */ + }; + + usb2_phy: usb2-phy { + compatible = "usb-nop-xceiv"; + vbus-regulator = <®_5p0v_usb>; + }; + + usb3_phy: usb3-phy { + compatible = "usb-nop-xceiv"; + }; + + soc { + internal-regs { + i2c@11000 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "okay"; + + /* + * PCA9655 GPIO expander, up to 1MHz clock. + * 0-Board Revision bit 0 # + * 1-Board Revision bit 1 # + * 5-USB3 overcurrent + * 6-USB3 power + */ + expander0: gpio-expander@20 { + /* + * This is how it should be: + * compatible = "onnn,pca9655", + * "nxp,pca9555"; + * but you can't do this because of + * the way I2C works. + */ + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + pinctrl-names = "default"; + pinctrl-0 = <&pca0_pins>; + interrupt-parent = <&gpio0>; + interrupts = <23 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + + board_rev_bit_0 { + gpio-hog; + gpios = <0 GPIO_ACTIVE_LOW>; + input; + line-name = "board-rev-0"; + }; + board_rev_bit_1 { + gpio-hog; + gpios = <1 GPIO_ACTIVE_LOW>; + input; + line-name = "board-rev-1"; + }; + usb3_ilimit { + gpio-hog; + gpios = <5 GPIO_ACTIVE_HIGH>; + input; + line-name = "usb-overcurrent-status"; + }; + }; + + temp_sensor: temp@4c { + compatible = "ti,lm75"; + reg = <0x4c>; + vcc-supply = <®_3p3v>; + }; + }; + + i2c@11100 { + /* + * External I2C Bus for user peripheral + */ + clock-frequency = <400000>; + pinctrl-0 = <&helios_i2c1_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + sata@a8000 { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + sata0: sata-port@0 { + reg = <0>; + }; + + sata1: sata-port@1 { + reg = <1>; + }; + }; + + sata@e0000 { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + sata2: sata-port@0 { + reg = <0>; + }; + + sata3: sata-port@1 { + reg = <1>; + }; + }; + + spi@10680 { + pinctrl-0 = <&spi1_pins + µsom_spi1_cs_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + sdhci@d8000 { + bus-width = <4>; + cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; + no-1-8-v; + pinctrl-0 = <&helios_sdhci_pins + &helios_sdhci_cd_pins>; + pinctrl-names = "default"; + status = "okay"; + vmmc = <®_3p3v>; + wp-inverted; + }; + + usb@58000 { + usb-phy = <&usb2_phy>; + status = "okay"; + }; + + usb3@f0000 { + status = "okay"; + }; + + usb3@f8000 { + status = "okay"; + }; + + pinctrl@18000 { + pca0_pins: pca0-pins { + marvell,pins = "mpp23"; + marvell,function = "gpio"; + }; + microsom_phy0_int_pins: microsom-phy0-int-pins { + marvell,pins = "mpp18"; + marvell,function = "gpio"; + }; + helios_i2c1_pins: i2c1-pins { + marvell,pins = "mpp26", "mpp27"; + marvell,function = "i2c1"; + }; + helios_sdhci_cd_pins: helios-sdhci-cd-pins { + marvell,pins = "mpp20"; + marvell,function = "gpio"; + }; + helios_sdhci_pins: helios-sdhci-pins { + marvell,pins = "mpp21", "mpp28", + "mpp37", "mpp38", + "mpp39", "mpp40"; + marvell,function = "sd0"; + }; + helios_led_pins: helios-led-pins { + marvell,pins = "mpp24", "mpp25", + "mpp49", "mpp50", + "mpp52", "mpp53", + "mpp54"; + marvell,function = "gpio"; + }; + helios_fan_pins: helios-fan-pins { + marvell,pins = "mpp41", "mpp43", + "mpp48", "mpp55"; + marvell,function = "gpio"; + }; + microsom_spi1_cs_pins: spi1-cs-pins { + marvell,pins = "mpp59"; + marvell,function = "spi1"; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi index 2d1cea131e71..3a7f9c1ac346 100644 --- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi +++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi @@ -3,11 +3,6 @@ * Device Tree file for SolidRun Armada 38x Microsom * * Copyright (C) 2015 Russell King - * - * This board is in development; the contents of this file work with - * the A1 rev 2.0 of the board, which does not represent final - * production board. Things will change, don't expect this file to - * remain compatible info the future. */ #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> @@ -99,7 +94,6 @@ compatible = "w25q32", "jedec,spi-nor"; reg = <0>; /* Chip select 0 */ spi-max-frequency = <3000000>; - status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91-dvk_som60.dts b/arch/arm/boot/dts/at91-dvk_som60.dts new file mode 100644 index 000000000000..ededd5b0d27b --- /dev/null +++ b/arch/arm/boot/dts/at91-dvk_som60.dts @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-dvk_som60.dts - Device Tree file for the DVK SOM60 board + * + * Copyright (C) 2018 Laird, + * 2018 Ben Whitten <ben.whitten@lairdtech.com> + * + */ +/dts-v1/; +#include "at91-som60.dtsi" +#include "at91-dvk_su60_somc.dtsi" +#include "at91-dvk_su60_somc_lcm.dtsi" + +/ { + model = "Laird DVK SOM60"; + compatible = "laird,dvk-som60", "laird,som60", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5"; + + chosen { + stdout-path = &dbgu; + tick-timer = &pit; + }; +}; + +&mmc0 { + status = "okay"; +}; + +&spi0 { + status = "okay"; +}; + +&ssc0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&usart1 { + status = "okay"; +}; + +&usart2 { + status = "okay"; +}; + +&usart3 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&dbgu { + status = "okay"; +}; + +&pit { + status = "okay"; +}; + +&adc0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&macb0 { + status = "okay"; +}; + +&macb1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi new file mode 100644 index 000000000000..bb86f17ed5ed --- /dev/null +++ b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi @@ -0,0 +1,159 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-dvk_su60_somc.dtsi - Device Tree file for the DVK SOM60 base board + * + * Copyright (C) 2018 Laird, + * 2018 Ben Whitten <ben.whitten@lairdtech.com> + * + */ + +/ { + sound { + compatible = "atmel,asoc-wm8904"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck2_as_audio_mck>; + + atmel,model = "wm8904 @ DVK-SOM60"; + atmel,audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN2L", "Line In Jack", + "IN2R", "Line In Jack", + "Mic", "MICBIAS", + "IN1L", "Mic"; + + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8904>; + + status = "okay"; + }; +}; + +&mmc0 { + status = "okay"; + + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>; + slot@0 { + bus-width = <4>; + cd-gpios = <&pioE 31 GPIO_ACTIVE_HIGH>; + cd-inverted; + }; +}; + +&spi0 { + status = "okay"; + + /* spi0.0: 4M Flash Macronix MX25R4035FM1IL0 */ + spi-flash@0 { + compatible = "mxicy,mx25u4035", "jedec,spi-nor"; + spi-max-frequency = <33000000>; + reg = <0>; + }; +}; + +&ssc0 { + atmel,clk-from-rk-pin; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + wm8904: wm8904@1a { + compatible = "wlf,wm8904"; + reg = <0x1a>; + clocks = <&pck2>; + clock-names = "mclk"; + }; +}; + +&i2c1 { + status = "okay"; + + eeprom@87 { + compatible = "giantec,gt24c32a", "atmel,24c32"; + reg = <87>; + pagesize = <32>; + }; +}; + +&usart1 { + status = "okay"; +}; + +&usart2 { + status = "okay"; +}; + +&usart3 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&dbgu { + status = "okay"; +}; + +&pit { + status = "okay"; +}; + +&adc0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&macb0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ethernet-phy@7 { + reg = <7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_geth_int>; + interrupt-parent = <&pioB>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + txen-skew-ps = <800>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <400>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <400>; + rxd1-skew-ps = <400>; + rxd2-skew-ps = <400>; + rxd3-skew-ps = <400>; + }; +}; + +&macb1 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ethernet-phy@1 { + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eth_int>; + interrupt-parent = <&pioC>; + interrupts = <10 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi new file mode 100644 index 000000000000..4b9176dc5d02 --- /dev/null +++ b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-dvk_su60_somc_lcm.dtsi - Device Tree file for the DVK SOM60 LCD board + * + * Copyright (C) 2018 Laird, + * 2018 Ben Whitten <ben.whitten@lairdtech.com> + * + */ + +/ { + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&hlcdc_pwm 0 50000 0>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + + panel: panel { + compatible = "winstar,wf70gtiagdng0", "innolux,at070tn92", "simple-panel"; + backlight = <&backlight>; + power-supply = <&vcc_lcd_reg>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + panel_input: endpoint@0 { + reg = <0>; + remote-endpoint = <&hlcdc_panel_output>; + }; + }; + }; + + vcc_lcd_reg: fixedregulator_lcd { + compatible = "regulator-fixed"; + regulator-name = "VCC LCM"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + status = "okay"; + }; +}; + +&pinctrl { + board { + pinctrl_lcd_ctp_int: lcd_ctp_int { + atmel,pins = + <AT91_PIOC 28 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + }; +}; + +&i2c1 { + status = "okay"; + + ft5426@56 { + compatible = "focaltech,ft5426", "edt,edt-ft5406"; + reg = <56>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_ctp_int>; + + interrupt-parent = <&pioC>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; + + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + }; +}; + +&hlcdc { + status = "okay"; + + hlcdc-display-controller { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; + + port@0 { + hlcdc_panel_output: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91-gatwick.dts b/arch/arm/boot/dts/at91-gatwick.dts new file mode 100644 index 000000000000..5a81cab5fc3a --- /dev/null +++ b/arch/arm/boot/dts/at91-gatwick.dts @@ -0,0 +1,121 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-gatwick.dts - Device Tree file for the Gatwick board + * + * Copyright (C) 2018 Laird + * + */ +/dts-v1/; +#include "at91-wb50n.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "Laird Workgroup Bridge 50N - Project Gatwick"; + compatible = "laird,gatwick", "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; + + gpio_keys { + compatible = "gpio-keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_key_gpio>; + + reset-button { + label = "Reset Button"; + linux,code = <KEY_SETUP>; + gpios = <&pioE 31 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + + ethernet { + label = "gatwick:yellow:ethernet"; + gpios = <&pioA 10 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + wifi { + label = "gatwick:green:wifi"; + gpios = <&pioA 28 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + ble { + label = "gatwick:blue:ble"; + gpios = <&pioA 22 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + lora { + label = "gatwick:orange:lora"; + gpios = <&pioA 26 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + blank { + label = "gatwick:green:blank"; + gpios = <&pioA 24 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + user { + label = "gatwick:yellow:user"; + gpios = <&pioA 12 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; +}; + +&pinctrl { + board { + pinctrl_key_gpio: key_gpio_0 { + atmel,pins = + <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE31 GPIO with pullup deglitch */ + }; + }; +}; + +&mmc0 { + status = "okay"; +}; + +&macb1 { + status = "okay"; +}; + +&dbgu { + status = "okay"; +}; + +/* FTDI USART */ +&usart0 { + status = "okay"; +}; + +/* GPS USART */ +&usart1 { + pinctrl-0 = <&pinctrl_usart1>; + status = "okay"; +}; + +&spi1 { + status = "okay"; + + spidev@0 { + compatible = "semtech,sx1301"; + reg = <0>; + spi-max-frequency = <8000000>; + }; +}; + +&usb1 { + status = "okay"; + /delete-property/atmel,oc-gpio; +}; + +&usb2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/at91-som60.dtsi b/arch/arm/boot/dts/at91-som60.dtsi new file mode 100644 index 000000000000..241682a207c5 --- /dev/null +++ b/arch/arm/boot/dts/at91-som60.dtsi @@ -0,0 +1,230 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-som60.dtsi - Device Tree file for the SOM60 module + * + * Copyright (C) 2018 Laird, + * 2018 Ben Whitten <ben.whitten@lairdtech.com> + * + */ +#include "sama5d36.dtsi" + +/ { + model = "Laird SOM60"; + compatible = "laird,som60", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5"; + + chosen { + stdout-path = &dbgu; + }; + + memory { + reg = <0x20000000 0x8000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; +}; + +&pinctrl { + board { + pinctrl_mmc0_cd: mmc0_cd { + atmel,pins = + <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + }; + + pinctrl_mmc0_en: mmc0_en { + atmel,pins = + <AT91_PIOE 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + + pinctrl_nand0_wp: nand0_wp { + atmel,pins = + <AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_usb_vbus: usb_vbus { + atmel,pins = + <AT91_PIOE 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + /* Conflicts with USART2_SCK */ + }; + + pinctrl_usart2_sck: usart2_sck { + atmel,pins = + <AT91_PIOE 20 AT91_PERIPH_B AT91_PINCTRL_NONE>; + /* Conflicts with USB_VBUS */ + }; + + pinctrl_usb_oc: usb_oc { + atmel,pins = + <AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + /* Conflicts with USART3_SCK */ + }; + + pinctrl_usart3_sck: usart3_sck { + atmel,pins = + <AT91_PIOE 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; + /* Conflicts with USB_OC */ + }; + + pinctrl_usba_vbus: usba_vbus { + atmel,pins = + <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + }; + + pinctrl_geth_int: geth_int { + atmel,pins = + <AT91_PIOB 25 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + /* Conflicts with USART1_SCK */ + }; + + pinctrl_usart1_sck: usart1_sck { + atmel,pins = + <AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; + /* Conflicts with GETH_INT */ + }; + + pinctrl_eth_int: eth_int { + atmel,pins = + <AT91_PIOC 10 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + }; + + pinctrl_pck2_as_audio_mck: pck2_as_audio_mck { + atmel,pins = + <AT91_PIOC 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; +}; + +&mmc0 { + slot@0 { + reg = <0>; + bus-width = <8>; + }; +}; + +&mmc1 { + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + }; +}; + +&spi0 { + cs-gpios = <&pioD 13 0>, <0>, <0>, <0>; +}; + +&usart0 { + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; + pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>; +}; + +&usart1 { + pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; +}; + +&usart2 { + pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts_cts>; +}; + +&usart3 { + pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>; +}; + +&adc0 { + pinctrl-0 = < + &pinctrl_adc0_adtrg + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad1 + &pinctrl_adc0_ad2 + &pinctrl_adc0_ad3 + &pinctrl_adc0_ad4 + &pinctrl_adc0_ad5 + >; +}; + +&macb0 { + phy-mode = "rgmii"; +}; + +&macb1 { + phy-mode = "rmii"; +}; + +&ebi { + pinctrl-0 = <&pinctrl_ebi_nand_addr>; + pinctrl-names = "default"; + status = "okay"; +}; + +&nand_controller { + status = "okay"; + + nand: nand@3 { + reg = <0x3 0x0 0x2>; + atmel,rb = <0>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + ubootspl@0 { + label = "u-boot-spl"; + reg = <0x0 0x20000>; + }; + + uboot@20000 { + label = "u-boot"; + reg = <0x20000 0x80000>; + }; + + ubootenv@a0000 { + label = "u-boot-env"; + reg = <0xa0000 0x20000>; + }; + + ubootenv@c0000 { + label = "u-boot-env"; + reg = <0xc0000 0x20000>; + }; + + ubi@e0000 { + label = "ubi"; + reg = <0xe0000 0xfe00000>; + }; + }; + }; +}; + +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + atmel,vbus-gpio = <&pioC 14 GPIO_ACTIVE_HIGH>; +}; + +&usb1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_vbus &pinctrl_usb_oc>; + num-ports = <3>; + atmel,vbus-gpio = <0 + &pioE 20 GPIO_ACTIVE_HIGH + 0>; + atmel,oc-gpio = <0 + &pioE 15 GPIO_ACTIVE_LOW + 0>; +}; diff --git a/arch/arm/boot/dts/at91-wb45n.dts b/arch/arm/boot/dts/at91-wb45n.dts new file mode 100644 index 000000000000..5b9512a6c89c --- /dev/null +++ b/arch/arm/boot/dts/at91-wb45n.dts @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-wb45n.dts - Device Tree file for WB45NBT board + * + * Copyright (C) 2018 Laird + * + */ +/dts-v1/; +#include "at91-wb45n.dtsi" + +/ { + model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)"; + compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9"; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + irqbtn@18 { + reg = <18>; + label = "IRQBTN"; + linux,code = <99>; + gpios = <&pioB 18 GPIO_ACTIVE_LOW>; + gpio-key,wakeup = <1>; + }; + }; +}; + +&watchdog { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&mmc0 { + status = "okay"; +}; + +&spi0 { + status = "okay"; +}; + +&macb0 { + status = "okay"; +}; + +&dbgu { + status = "okay"; +}; + +&usart0 { + status = "okay"; +}; + +&usart3 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/at91-wb45n.dtsi b/arch/arm/boot/dts/at91-wb45n.dtsi new file mode 100644 index 000000000000..ebe61a25ca96 --- /dev/null +++ b/arch/arm/boot/dts/at91-wb45n.dtsi @@ -0,0 +1,165 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-wb45n.dtsi - Device Tree file for WB45NBT board + * + * Copyright (C) 2018 Laird + * + */ + +#include "at91sam9g25.dtsi" + +/ { + model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)"; + compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9"; + + chosen { + bootargs = "ubi.mtd=6 root=ubi0:rootfs rootfstype=ubifs rw"; + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + atheros { + compatible = "atheros,ath6kl"; + atheros,board-id = "SD32"; + }; +}; + +&reset_controller { + compatible = "atmel,sama5d3-rstc"; +}; + +&shutdown_controller { + atmel,wakeup-mode = "low"; +}; + +&slow_xtal { + clock-frequency = <32768>; +}; + +&main_xtal { + clock-frequency = <12000000>; +}; + +&ebi { + status = "okay"; + nand_controller: nand-controller { + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb &pinctrl_nand_oe_we>; + pinctrl-names = "default"; + status = "okay"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bs"; + reg = <0x0 0x20000>; + }; + + uboot@20000 { + label = "u-boot"; + reg = <0x20000 0x80000>; + }; + + ubootenv@a0000 { + label = "u-boot-env"; + reg = <0xa0000 0x20000>; + }; + + ubootenv@c0000 { + label = "redund-env"; + reg = <0xc0000 0x20000>; + }; + + kernel-a@e0000 { + label = "kernel-a"; + reg = <0xe0000 0x280000>; + }; + + kernel-b@360000 { + label = "kernel-b"; + reg = <0x360000 0x280000>; + }; + + rootfs-a@5e0000 { + label = "rootfs-a"; + reg = <0x5e0000 0x2600000>; + }; + + rootfs-b@2be0000 { + label = "rootfs-b"; + reg = <0x2be0000 0x2600000>; + }; + + user@51e0000 { + label = "user"; + reg = <0x51e0000 0x2dc0000>; + }; + + logs@7fa0000 { + label = "logs"; + reg = <0x7fa0000 0x60000>; + }; + + }; + }; + }; +}; + +&usb0 { + num-ports = <2>; + atmel,vbus-gpio = < + &pioB 12 GPIO_ACTIVE_HIGH + &pioA 31 GPIO_ACTIVE_HIGH + >; + atmel,oc-gpio = <&pioB 13 GPIO_ACTIVE_LOW>; +}; + +&macb0 { + phy-mode = "rmii"; +}; + +&spi0 { + cs-gpios = <&pioA 14 0>, <&pioA 7 0>, <0>, <0>; +}; + +&usb2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_board_usb2>; + atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>; +}; + +&mmc0 { + pinctrl-0 = < + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + slot@0 { + reg = <0>; + bus-width = <4>; + }; +}; + +&pinctrl { + usb2 { + pinctrl_board_usb2: usb2-board { + atmel,pins = + <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB11 gpio vbus sense, deglitch */ + }; + }; +}; + diff --git a/arch/arm/boot/dts/at91-wb50n.dts b/arch/arm/boot/dts/at91-wb50n.dts new file mode 100644 index 000000000000..8cecc7051a86 --- /dev/null +++ b/arch/arm/boot/dts/at91-wb50n.dts @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-wb50n.dts - Device Tree file for wb50n evaluation board + * + * Copyright (C) 2018 Laird + * + */ + +/dts-v1/; +#include "at91-wb50n.dtsi" + +/ { + model = "Laird Workgroup Bridge 50N - Atmel SAMA5D"; + compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + btn0@10 { + reg = <10>; + label = "BTNESC"; + linux,code = <1>; /* ESC button */ + gpios = <&pioA 10 GPIO_ACTIVE_LOW>; + gpio-key,wakeup = <1>; + }; + + irqbtn@31 { + reg = <31>; + label = "IRQBTN"; + linux,code = <99>; /* SysReq button */ + gpios = <&pioE 31 GPIO_ACTIVE_LOW>; + gpio-key,wakeup = <1>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led0 { + label = "wb50n:blue:led0"; + gpios = <&pioA 12 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led1 { + label = "wb50n:green:led1"; + gpios = <&pioA 24 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led2 { + label = "wb50n:red:led2"; + gpios = <&pioA 26 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; +}; + +&watchdog { + status = "okay"; +}; + +&mmc0 { + status = "okay"; +}; + +&macb1 { + status = "okay"; +}; + +&dbgu { + status = "okay"; +}; + +/* On BB40 this port is labeled UART1 */ +&usart0 { + status = "okay"; +}; + +/* On BB40 this port is labeled UART0 */ +&usart1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&spi1 { + status = "okay"; + + spidev@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <8000000>; + }; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/at91-wb50n.dtsi b/arch/arm/boot/dts/at91-wb50n.dtsi new file mode 100644 index 000000000000..85692c8ef2b1 --- /dev/null +++ b/arch/arm/boot/dts/at91-wb50n.dtsi @@ -0,0 +1,198 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-wb50n.dtsi - Device Tree include file for wb50n cpu module + * + * Copyright (C) 2018 Laird + * + */ + +#include "sama5d31.dtsi" + +/ { + model = "Laird Workgroup Bridge 50N - Atmel SAMA5D"; + compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; + + chosen { + bootargs = "ubi.mtd=6 root=ubi0:rootfs rootfstype=ubifs rw"; + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; +}; + +&pinctrl { + board { + pinctrl_mmc0_cd: mmc0_cd { + atmel,pins = <AT91_PIOC 26 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC26 GPIO with pullup deglitch */ + }; + + pinctrl_usba_vbus: usba_vbus { + atmel,pins = <AT91_PIOB 13 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB13 GPIO with deglitch */ + }; + }; +}; + +&slow_xtal { + clock-frequency = <32768>; +}; + +&main_xtal { + clock-frequency = <12000000>; +}; + +&slow_osc { + atmel,osc-bypass; +}; + +&usart1_clk { + atmel,clk-output-range = <0 132000000>; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>; + cd-gpios = <&pioC 26 GPIO_ACTIVE_LOW>; + slot@0 { + reg = <0>; + bus-width = <4>; + }; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>; + status = "okay"; + atheros@0 { + compatible = "atheros,ath6kl"; + atheros,board-id = "SD32"; + reg = <0>; + bus-width = <4>; + }; +}; + +&macb1 { + phy-mode = "rmii"; +}; + +&dbgu { + dmas = <0>, <0>; /* Do not use DMA for dbgu */ +}; + +/* On BB40 this port is labeled UART1 */ +&usart0 { + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>; +}; + +/* On BB40 this port is labeled UART0 */ +&usart1 { + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; + dtr-gpios = <&pioD 13 GPIO_ACTIVE_LOW>; + dsr-gpios = <&pioD 11 GPIO_ACTIVE_LOW>; + dcd-gpios = <&pioD 7 GPIO_ACTIVE_LOW>; + rng-gpios = <&pioD 8 GPIO_ACTIVE_LOW>; +}; + +/* USART3 is direct-connect to the Bluetooth UART on the radio SIP */ +&usart3 { + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>; + status = "okay"; +}; + +&spi1 { + cs-gpios = <&pioC 25 0>, <0>, <0>, <0>; +}; + +&ebi { + pinctrl-0 = <&pinctrl_ebi_nand_addr>; + pinctrl-names = "default"; + status = "okay"; +}; + +&nand_controller { + status = "okay"; + + nand: nand@3 { + reg = <0x3 0x0 0x2>; + atmel,rb = <0>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bs"; + reg = <0x0 0x20000>; + }; + + uboot@20000 { + label = "u-boot"; + reg = <0x20000 0x80000>; + }; + + ubootenv@a0000 { + label = "u-boot-env"; + reg = <0xa0000 0x20000>; + }; + + ubootenv@c0000 { + label = "u-boot-env"; + reg = <0xc0000 0x20000>; + }; + + kernel-a@e0000 { + label = "kernel-a"; + reg = <0xe0000 0x500000>; + }; + + kernel-b@5e0000 { + label = "kernel-b"; + reg = <0x5e0000 0x500000>; + }; + + rootfs-a@ae0000 { + label = "rootfs-a"; + reg = <0xae0000 0x3000000>; + }; + + rootfs-b@3ae0000 { + label = "rootfs-b"; + reg = <0x3ae0000 0x3000000>; + }; + + user@6ae0000 { + label = "user"; + reg = <0x6ae0000 0x14e0000>; + }; + }; + }; +}; + +&usb0 { + atmel,vbus-gpio = <&pioB 13 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; +}; + +&usb1 { + num-ports = <3>; + atmel,vbus-gpio = <&pioA 2 GPIO_ACTIVE_LOW>; + atmel,oc-gpio = <&pioA 4 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index 53c63d0a418a..33f09d5ea020 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -590,7 +590,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91rm9200-pmc", "syscon"; + compatible = "atmel,at91sam9261-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 87fb0660ab5d..af68a86c9973 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -93,7 +93,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91rm9200-pmc", "syscon"; + compatible = "atmel,at91sam9263-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index bd001cca25a4..8fb22030f00b 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -832,7 +832,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91sam9g45-pmc", "syscon"; + compatible = "atmel,at91sam9rl-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index a3c3c3128148..11c0ef102ab1 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -389,13 +389,13 @@ }; }; - rstc@fffffe00 { + reset_controller: rstc@fffffe00 { compatible = "atmel,at91sam9g45-rstc"; reg = <0xfffffe00 0x10>; clocks = <&clk32k>; }; - shdwc@fffffe10 { + shutdown_controller: shdwc@fffffe10 { compatible = "atmel,at91sam9x5-shdwc"; reg = <0xfffffe10 0x10>; clocks = <&clk32k>; @@ -470,7 +470,7 @@ clock-names = "dma_clk"; }; - pinctrl@fffff400 { + pinctrl: pinctrl@fffff400 { #address-cells = <1>; #size-cells = <1>; compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; @@ -1206,7 +1206,7 @@ }; }; - watchdog@fffffe40 { + watchdog: watchdog@fffffe40 { compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffe40 0x10>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 9fe4f5a6379e..253df7170a4e 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -41,6 +41,10 @@ model = "Broadcom Cygnus SoC"; interrupt-parent = <&gic>; + aliases { + ethernet0 = ð0; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -216,7 +220,7 @@ reg = <0x18008000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <100000>; status = "disabled"; }; @@ -245,7 +249,7 @@ reg = <0x1800b000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <100000>; status = "disabled"; }; @@ -256,7 +260,7 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; linux,pci-domain = <0>; @@ -278,10 +282,10 @@ compatible = "brcm,iproc-msi"; msi-controller; interrupt-parent = <&gic>; - interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>, - <GIC_SPI 97 IRQ_TYPE_NONE>, - <GIC_SPI 98 IRQ_TYPE_NONE>, - <GIC_SPI 99 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -291,7 +295,7 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; linux,pci-domain = <1>; @@ -313,10 +317,10 @@ compatible = "brcm,iproc-msi"; msi-controller; interrupt-parent = <&gic>; - interrupts = <GIC_SPI 102 IRQ_TYPE_NONE>, - <GIC_SPI 103 IRQ_TYPE_NONE>, - <GIC_SPI 104 IRQ_TYPE_NONE>, - <GIC_SPI 105 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -417,6 +421,11 @@ status = "disabled"; }; + rng: rng@18032000 { + compatible = "brcm,iproc-rng200"; + reg = <0x18032000 0x28>; + }; + sdhci0: sdhci@18041000 { compatible = "brcm,sdhci-iproc-cygnus"; reg = <0x18041000 0x100>; diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi index 3f9cedd8011f..3084a7c95733 100644 --- a/arch/arm/boot/dts/bcm-hr2.dtsi +++ b/arch/arm/boot/dts/bcm-hr2.dtsi @@ -264,7 +264,7 @@ reg = <0x38000 0x50>; #address-cells = <1>; #size-cells = <0>; - interrupts = <GIC_SPI 95 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <100000>; }; @@ -279,7 +279,7 @@ reg = <0x3b000 0x50>; #address-cells = <1>; #size-cells = <0>; - interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <100000>; }; }; @@ -300,7 +300,7 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 186 IRQ_TYPE_NONE>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; linux,pci-domain = <0>; @@ -322,10 +322,10 @@ compatible = "brcm,iproc-msi"; msi-controller; interrupt-parent = <&gic>; - interrupts = <GIC_SPI 182 IRQ_TYPE_NONE>, - <GIC_SPI 183 IRQ_TYPE_NONE>, - <GIC_SPI 184 IRQ_TYPE_NONE>, - <GIC_SPI 185 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; brcm,pcie-msi-inten; }; }; @@ -336,7 +336,7 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 192 IRQ_TYPE_NONE>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; linux,pci-domain = <1>; @@ -358,10 +358,10 @@ compatible = "brcm,iproc-msi"; msi-controller; interrupt-parent = <&gic>; - interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>, - <GIC_SPI 189 IRQ_TYPE_NONE>, - <GIC_SPI 190 IRQ_TYPE_NONE>, - <GIC_SPI 191 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; brcm,pcie-msi-inten; }; }; diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index dcc55aa84583..09ba85046322 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -391,7 +391,7 @@ reg = <0x38000 0x50>; #address-cells = <1>; #size-cells = <0>; - interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <100000>; dma-coherent; status = "disabled"; @@ -496,7 +496,7 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_NONE>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; linux,pci-domain = <0>; @@ -519,10 +519,10 @@ compatible = "brcm,iproc-msi"; msi-controller; interrupt-parent = <&gic>; - interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>, - <GIC_SPI 128 IRQ_TYPE_NONE>, - <GIC_SPI 129 IRQ_TYPE_NONE>, - <GIC_SPI 130 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; brcm,pcie-msi-inten; }; }; @@ -533,7 +533,7 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_NONE>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; linux,pci-domain = <1>; @@ -556,10 +556,10 @@ compatible = "brcm,iproc-msi"; msi-controller; interrupt-parent = <&gic>; - interrupts = <GIC_SPI 133 IRQ_TYPE_NONE>, - <GIC_SPI 134 IRQ_TYPE_NONE>, - <GIC_SPI 135 IRQ_TYPE_NONE>, - <GIC_SPI 136 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; brcm,pcie-msi-inten; }; }; @@ -570,7 +570,7 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_NONE>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; linux,pci-domain = <2>; @@ -593,10 +593,10 @@ compatible = "brcm,iproc-msi"; msi-controller; interrupt-parent = <&gic>; - interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>, - <GIC_SPI 140 IRQ_TYPE_NONE>, - <GIC_SPI 141 IRQ_TYPE_NONE>, - <GIC_SPI 142 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; brcm,pcie-msi-inten; }; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts new file mode 100644 index 000000000000..4764a25585ab --- /dev/null +++ b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts @@ -0,0 +1,88 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2835-rpi-cm1.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" + +/ { + compatible = "raspberrypi,compute-module", "brcm,bcm2835"; + model = "Raspberry Pi Compute Module IO board rev1"; +}; + +&gpio { + /* + * This is based on the official GPU firmware DT blob. + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "GPIO0", + "GPIO1", + "GPIO2", + "GPIO3", + "GPIO4", + "GPIO5", + "GPIO6", + "GPIO7", + "GPIO8", + "GPIO9", + "GPIO10", + "GPIO11", + "GPIO12", + "GPIO13", + "GPIO14", + "GPIO15", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "GPIO28", + "GPIO29", + "GPIO30", + "GPIO31", + "GPIO32", + "GPIO33", + "GPIO34", + "GPIO35", + "GPIO36", + "GPIO37", + "GPIO38", + "GPIO39", + "GPIO40", + "GPIO41", + "GPIO42", + "GPIO43", + "GPIO44", + "GPIO45", + "HDMI_HPD_N", + /* Also used as ACT LED */ + "EMMC_EN_N", + /* Used by eMMC */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + + pinctrl-0 = <&gpioout &alt0>; +}; + +&hdmi { + hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio14>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi new file mode 100644 index 000000000000..ef22c2da783a --- /dev/null +++ b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2835.dtsi" +#include "bcm2835-rpi.dtsi" + +/ { + leds { + act { + gpios = <&gpio 47 GPIO_ACTIVE_LOW>; + }; + }; + + reg_3v3: fixed-regulator { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_1v8: fixed-regulator { + compatible = "regulator-fixed"; + regulator-name = "1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; +}; + +&sdhost { + non-removable; + vmmc-supply = <®_3v3>; + vqmmc-supply = <®_1v8>; +}; diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi index 7704bb029605..beb6c502dadc 100644 --- a/arch/arm/boot/dts/bcm2837.dtsi +++ b/arch/arm/boot/dts/bcm2837.dtsi @@ -17,6 +17,12 @@ }; }; + arm-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupt-parent = <&local_intc>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; + }; + timer { compatible = "arm,armv7-timer"; interrupt-parent = <&local_intc>; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 61315cf734ef..31b29646b14c 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -66,6 +66,12 @@ clock-frequency = <1000000>; }; + txp@7e004000 { + compatible = "brcm,bcm2835-txp"; + reg = <0x7e004000 0x20>; + interrupts = <1 11>; + }; + dma: dma@7e007000 { compatible = "brcm,bcm2835-dma"; reg = <0x7e007000 0xf00>; diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts index ff2e551b9058..79d454ff3be4 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts @@ -90,3 +90,7 @@ }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts index 3bcc03788f38..99365bb8c41e 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts @@ -80,3 +80,7 @@ }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts index a587384f8e40..bc330b1f6de0 100644 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts @@ -146,3 +146,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts index 6c8f0ad82332..258d2b251900 100644 --- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts +++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts @@ -38,3 +38,7 @@ }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts index ebda45fe9ea4..e7fdaed99bd0 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts @@ -57,3 +57,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts index 9dd0e22c906a..42bafc644013 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts @@ -64,3 +64,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index d7c34fa72b4b..dce35eb79dbe 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -91,3 +91,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts index 2642494c97a1..b7a024b7951b 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts @@ -83,3 +83,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts index e7b09b7b7d25..f7f834cd3448 100644 --- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts @@ -158,3 +158,7 @@ }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts index 16314fcc6e56..76a2bab3bc6f 100644 --- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts +++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts @@ -74,3 +74,7 @@ }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts index 328aa90240ce..69e3570e03dd 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts @@ -118,3 +118,7 @@ }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts index 8ea46eed26e2..0f6f0fe13bfb 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts @@ -104,3 +104,7 @@ }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts index 5eeac7302329..f77089744996 100644 --- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts +++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts @@ -57,3 +57,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts index da4d9ec62fc6..4d427863756f 100644 --- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts +++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts @@ -105,3 +105,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts index c94c732188fb..5f663f848db1 100644 --- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts +++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts @@ -99,3 +99,7 @@ &usb2 { vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts index 22271818f901..2033411240c7 100644 --- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts +++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts @@ -62,3 +62,7 @@ }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts index 79a9633ec417..77d1687b4228 100644 --- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts @@ -127,3 +127,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts index db744a5e122d..983149b55269 100644 --- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts +++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts @@ -39,3 +39,7 @@ }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts index 9e267d38df4c..ca41481b44bd 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts @@ -101,3 +101,7 @@ &usb3 { vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts index d266131652ad..aa69e656d395 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts @@ -182,3 +182,7 @@ &usb3 { vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts index f5bf6586ae07..c7143a9daa1a 100644 --- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts +++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts @@ -104,3 +104,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts index d173bcd93b91..03c1ab188576 100644 --- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts @@ -115,3 +115,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts index f47afe36d857..36efe410dcd7 100644 --- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts +++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts @@ -31,5 +31,238 @@ linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; }; + + rfkill { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; + }; + + reset { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + wps { + label = "bcm53xx:white:wps"; + gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>; + }; + + usb2 { + label = "bcm53xx:green:usb2"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port2>, <&ehci_port2>; + linux,default-trigger = "usbport"; + }; + + usb3 { + label = "bcm53xx:green:usb3"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, + <&xhci_port1>; + linux,default-trigger = "usbport"; + }; + + power { + label = "bcm53xx:white:power"; + gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; + }; + + wifi-disabled { + label = "bcm53xx:amber:wifi-disabled"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + }; + + wifi-enabled { + label = "bcm53xx:white:wifi-enabled"; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + }; + + bluebar1 { + label = "bcm53xx:white:bluebar1"; + gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; + }; + + bluebar2 { + label = "bcm53xx:white:bluebar2"; + gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; + }; + + bluebar3 { + label = "bcm53xx:white:bluebar3"; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + }; + + bluebar4 { + label = "bcm53xx:white:bluebar4"; + gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>; + }; + + bluebar5 { + label = "bcm53xx:white:bluebar5"; + gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>; + }; + + bluebar6 { + label = "bcm53xx:white:bluebar6"; + gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>; + }; + + bluebar7 { + label = "bcm53xx:white:bluebar7"; + gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>; + }; + + bluebar8 { + label = "bcm53xx:white:bluebar8"; + gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; + }; + }; + + mdio-bus-mux { + /* BIT(9) = 1 => external mdio */ + mdio_ext: mdio@200 { + reg = <0x200>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + mdio-mii-mux { + compatible = "mdio-mux-mmioreg"; + mdio-parent-bus = <&mdio_ext>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1800c1c0 0x4>; + + /* BIT(6) = mdc, BIT(7) = mdio */ + mux-mask = <0xc0>; + + mdio-mii@0 { + /* Enable MII function */ + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + switch@0 { + compatible = "brcm,bcm53125"; + #address-cells = <1>; + #size-cells = <0>; + reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; + reset-names = "robo_reset"; + reg = <0>; + dsa,member = <1 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan5"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan6"; + }; + + port@4 { + reg = <4>; + label = "lan3"; + }; + + sw1_p8: port@8 { + reg = <8>; + ethernet = <&sw0_p0>; + label = "cpu"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; + }; +}; + +&usb2 { + vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>; +}; + +&usb3 { + vcc-gpio = <&chipcommon 14 GPIO_ACTIVE_HIGH>; +}; + +&srab { + compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab"; + status = "okay"; + dsa,member = <0 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + label = "lan7"; + }; + + port@2 { + reg = <2>; + label = "lan4"; + }; + + port@3 { + reg = <3>; + label = "lan8"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@8 { + reg = <8>; + ethernet = <&gmac2>; + label = "cpu"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + sw0_p0: port@0 { + reg = <0>; + label = "extsw"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts index a5cef51cfe4f..3e5e9972cd97 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts @@ -60,3 +60,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts index 7496aabf8f77..7acbecd42950 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts @@ -60,3 +60,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts index 53aaa5212610..f4558d9d2769 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts @@ -100,3 +100,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts index 0e718edc065a..30719380b6c0 100644 --- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts +++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts @@ -91,3 +91,7 @@ }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi index 4840a782fc05..f7c3e274b354 100644 --- a/arch/arm/boot/dts/bcm47094.dtsi +++ b/arch/arm/boot/dts/bcm47094.dtsi @@ -7,9 +7,10 @@ #include "bcm4708.dtsi" / { - usb3_phy: usb3-phy { - compatible = "brcm,ns-bx-usb3-phy"; - }; +}; + +&usb3_phy { + compatible = "brcm,ns-bx-usb3-phy"; }; &uart0 { diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 9a076c409f4e..bc607d11eef8 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -154,13 +154,6 @@ clock-names = "phy-ref-clk"; }; - usb3_phy: usb3-phy { - compatible = "brcm,ns-ax-usb3-phy"; - reg = <0x18105000 0x1000>, <0x18003000 0x1000>; - reg-names = "dmp", "ccb-mii"; - #phy-cells = <0>; - }; - axi@18000000 { compatible = "brcm,bus-axi"; reg = <0x18000000 0x1000>; @@ -359,13 +352,39 @@ reg = <0x18003000 0x8>; #size-cells = <1>; #address-cells = <0>; - status = "disabled"; + }; + + mdio-bus-mux { + compatible = "mdio-mux-mmioreg"; + mdio-parent-bus = <&mdio>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x18003000 0x4>; + mux-mask = <0x200>; + + mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + usb3_phy: usb3-phy@10 { + compatible = "brcm,ns-ax-usb3-phy"; + reg = <0x10>; + usb3-dmp-syscon = <&usb3_dmp>; + #phy-cells = <0>; + status = "disabled"; + }; + }; + }; + + usb3_dmp: syscon@18105000 { + reg = <0x18105000 0x1000>; }; i2c0: i2c@18009000 { compatible = "brcm,iproc-i2c"; reg = <0x18009000 0x50>; - interrupts = <GIC_SPI 121 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clock-frequency = <100000>; diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi index 16007d72c346..453a2a37dabd 100644 --- a/arch/arm/boot/dts/bcm53573.dtsi +++ b/arch/arm/boot/dts/bcm53573.dtsi @@ -48,6 +48,14 @@ }; }; + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; + clocks { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts index 2e08c895f281..934f07adfe3c 100644 --- a/arch/arm/boot/dts/bcm94708.dts +++ b/arch/arm/boot/dts/bcm94708.dts @@ -42,3 +42,7 @@ reg = <0x00000000 0x08000000>; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/bcm94709.dts index c37616c67edc..31e4dd098776 100644 --- a/arch/arm/boot/dts/bcm94709.dts +++ b/arch/arm/boot/dts/bcm94709.dts @@ -42,3 +42,7 @@ reg = <0x00000000 0x08000000>; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts index 40e694bfe5ca..17f63c7a0437 100644 --- a/arch/arm/boot/dts/bcm953012er.dts +++ b/arch/arm/boot/dts/bcm953012er.dts @@ -90,3 +90,7 @@ }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm953012hr.dts b/arch/arm/boot/dts/bcm953012hr.dts index 3076e81699cf..11b0f5ed99e6 100644 --- a/arch/arm/boot/dts/bcm953012hr.dts +++ b/arch/arm/boot/dts/bcm953012hr.dts @@ -95,3 +95,7 @@ reg = <0x00700000 0x00900000>; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts index 79c168e2714b..e798055d6989 100644 --- a/arch/arm/boot/dts/bcm953012k.dts +++ b/arch/arm/boot/dts/bcm953012k.dts @@ -113,3 +113,7 @@ &uart1 { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi index db67377af266..d2f7d984bba5 100644 --- a/arch/arm/boot/dts/berlin2.dtsi +++ b/arch/arm/boot/dts/berlin2.dtsi @@ -50,6 +50,16 @@ device_type = "cpu"; next-level-cache = <&l2>; reg = <1>; + + clocks = <&chip_clk CLKID_CPU>; + clock-latency = <100000>; + operating-points = < + /* kHz uV */ + 1200000 1200000 + 1000000 1200000 + 800000 1200000 + 600000 1200000 + >; }; }; diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index 516a7ce25791..99d6872a6dfc 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -45,6 +45,17 @@ device_type = "cpu"; next-level-cache = <&l2>; reg = <1>; + + clocks = <&chip_clk CLKID_CPU>; + clock-latency = <100000>; + /* Can be modified by the bootloader */ + operating-points = < + /* kHz uV */ + 1200000 1200000 + 1000000 1200000 + 800000 1200000 + 600000 1200000 + >; }; cpu2: cpu@2 { @@ -52,6 +63,17 @@ device_type = "cpu"; next-level-cache = <&l2>; reg = <2>; + + clocks = <&chip_clk CLKID_CPU>; + clock-latency = <100000>; + /* Can be modified by the bootloader */ + operating-points = < + /* kHz uV */ + 1200000 1200000 + 1000000 1200000 + 800000 1200000 + 600000 1200000 + >; }; cpu3: cpu@3 { @@ -59,6 +81,17 @@ device_type = "cpu"; next-level-cache = <&l2>; reg = <3>; + + clocks = <&chip_clk CLKID_CPU>; + clock-latency = <100000>; + /* Can be modified by the bootloader */ + operating-points = < + /* kHz uV */ + 1200000 1200000 + 1000000 1200000 + 800000 1200000 + 600000 1200000 + >; }; }; diff --git a/arch/arm/boot/dts/da850-enbw-cmc.dts b/arch/arm/boot/dts/da850-enbw-cmc.dts index 14dff3e188ed..0102ffc5aa53 100644 --- a/arch/arm/boot/dts/da850-enbw-cmc.dts +++ b/arch/arm/boot/dts/da850-enbw-cmc.dts @@ -35,6 +35,10 @@ }; }; +&ref_clk { + clock-frequency = <24000000>; +}; + &edma0 { ti,edma-reserved-slot-ranges = <32 50>; }; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 0e82bb988fde..f9b757905845 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -27,6 +27,65 @@ spi0 = &spi1; }; + backlight: backlight-pwm { + pinctrl-names = "default"; + pinctrl-0 = <&ecap2_pins>; + power-supply = <&backlight_lcd>; + compatible = "pwm-backlight"; + /* + * The PWM here corresponds to production hardware. The + * schematic needs to be 1015171 (15 March 2010), Rev A + * or newer. + */ + pwms = <&ecap2 0 50000 0>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>; + default-brightness-level = <7>; + }; + + panel { + compatible = "ti,tilcdc,panel"; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + /* + * The vpif and the LCD are mutually exclusive. + * To enable VPIF, change the status below to 'disabled' then + * then change the status of the vpif below to 'okay' + */ + status = "okay"; + enable-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>; /* lcd_panel_pwr */ + + panel-info { + ac-bias = <255>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <16>; + fdd = <0x80>; + sync-edge = <0>; + sync-ctrl = <1>; + raster-order = <0>; + fifo-th = <0>; + }; + + display-timings { + native-mode = <&timing0>; + timing0: 480x272 { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <3>; + hback-porch = <2>; + hsync-len = <42>; + vback-porch = <3>; + vfront-porch = <4>; + vsync-len = <11>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; + vbat: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vbat"; @@ -35,6 +94,15 @@ regulator-boot-on; }; + backlight_lcd: backlight-regulator { + compatible = "regulator-fixed"; + regulator-name = "lcd_backlight_pwr"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio 47 GPIO_ACTIVE_HIGH>; /* lcd_backlight_pwr */ + enable-active-high; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "DA850/OMAP-L138 EVM"; @@ -63,6 +131,14 @@ }; }; +&ecap2 { + status = "okay"; +}; + +&ref_clk { + clock-frequency = <24000000>; +}; + &pmx_core { status = "okay"; @@ -93,6 +169,10 @@ }; }; +&sata { + status = "okay"; +}; + &serial0 { status = "okay"; }; @@ -109,6 +189,10 @@ status = "okay"; }; +&lcdc { + status = "okay"; +}; + &i2c0 { status = "okay"; clock-frequency = <100000>; @@ -336,5 +420,10 @@ &vpif { pinctrl-names = "default"; pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>; - status = "okay"; + /* + * The vpif and the LCD are mutually exclusive. + * To enable VPIF, disable the ti,tilcdc,panel then + * change the status below to 'okay' + */ + status = "disabled"; }; diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts index 0edf769ea95c..0177e3ed20fe 100644 --- a/arch/arm/boot/dts/da850-lcdk.dts +++ b/arch/arm/boot/dts/da850-lcdk.dts @@ -123,6 +123,10 @@ }; }; +&ref_clk { + clock-frequency = <24000000>; +}; + &pmx_core { status = "okay"; @@ -175,6 +179,11 @@ status = "okay"; }; +&sata_refclk { + status = "okay"; + clock-frequency = <100000000>; +}; + &sata { status = "okay"; }; diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts index ee3932475ce7..c4729d0e6c19 100644 --- a/arch/arm/boot/dts/da850-lego-ev3.dts +++ b/arch/arm/boot/dts/da850-lego-ev3.dts @@ -173,6 +173,15 @@ rechargeable-gpios = <&gpio 136 GPIO_ACTIVE_LOW>; }; + bt_slow_clk: bt-clock { + pinctrl-names = "default"; + pinctrl-0 = <&ecap2_pins>, <&bt_clock_bias>; + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&ecap2 0 30518 0>; + }; + /* ARM local RAM */ memory@ffff0000 { compatible = "syscon", "simple-mfd"; @@ -191,6 +200,10 @@ }; }; +&ref_clk { + clock-frequency = <24000000>; +}; + &pmx_core { status = "okay"; @@ -212,6 +225,20 @@ bias-disable; }; }; + + bt_clock_bias: bt-clock-bias-groups { + disable { + groups = "cp2"; + bias-disable; + }; + }; + + bt_pic_bias: bt-pic-bias-groups { + disable { + groups = "cp20"; + bias-disable; + }; + }; }; /* Input port 1 */ @@ -221,6 +248,22 @@ pinctrl-0 = <&serial1_rxtx_pins>; }; +&serial2 { + pinctrl-names = "default"; + pinctrl-0 = <&serial2_rxtx_pins>, <&serial2_rtscts_pins>, <&bt_pic_bias>; + status = "okay"; + + bluetooth { + compatible = "ti,cc2560"; + clocks = <&bt_slow_clk>; + clock-names = "ext_clock"; + enable-gpios = <&gpio 73 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + nvmem-cells = <&bdaddr>; + nvmem-cell-names = "bd-address"; + }; +}; + &rtc0 { status = "okay"; }; @@ -239,6 +282,12 @@ pagesize = <64>; read-only; reg = <0x50>; + #address-cells = <1>; + #size-cells = <1>; + + bdaddr: bdaddr@3f06 { + reg = <0x3f06 0x06>; + }; }; }; @@ -323,6 +372,10 @@ }; }; +&ecap2 { + status = "okay"; +}; + &ehrpwm0 { status = "okay"; }; @@ -336,6 +389,39 @@ gpios = <6 GPIO_ACTIVE_HIGH>; output-high; }; + + /* Don't impede Bluetooth clock signal */ + bt_clock_en { + gpio-hog; + gpios = <5 GPIO_ACTIVE_HIGH>; + input; + }; + + /* + * There is a PIC microcontroller for interfacing with an Apple MFi + * chip. This interferes with normal Bluetooth operation, so we need + * to make sure it is turned off. Note: The publicly available + * schematics from LEGO don't show that these pins are connected to + * anything, but they are present in the source code from LEGO. + */ + + bt_pic_en { + gpio-hog; + gpios = <51 GPIO_ACTIVE_HIGH>; + output-low; + }; + + bt_pic_rst { + gpio-hog; + gpios = <78 GPIO_ACTIVE_HIGH>; + output-high; + }; + + bt_pic_cts { + gpio-hog; + gpios = <87 GPIO_ACTIVE_HIGH>; + input; + }; }; &usb_phy { diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index f6f1597b03df..47aa53ba6b92 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -32,6 +32,25 @@ reg = <0xfffee000 0x2000>; }; }; + clocks: clocks { + ref_clk: ref_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "ref_clk"; + }; + sata_refclk: sata_refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "sata_refclk"; + status = "disabled"; + }; + usb_refclkin: usb_refclkin { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "usb_refclkin"; + status = "disabled"; + }; + }; dsp: dsp@11800000 { compatible = "ti,da850-dsp"; reg = <0x11800000 0x40000>, @@ -42,6 +61,8 @@ reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig"; interrupt-parent = <&intc>; interrupts = <28>; + clocks = <&psc0 15>; + resets = <&psc0 15>; status = "disabled"; }; soc@1c00000 { @@ -52,6 +73,38 @@ ranges = <0x0 0x01c00000 0x400000>; interrupt-parent = <&intc>; + psc0: clock-controller@10000 { + compatible = "ti,da850-psc0"; + reg = <0x10000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&pll0_sysclk 1>, <&pll0_sysclk 2>, + <&pll0_sysclk 4>, <&pll0_sysclk 6>, + <&async1_clk>; + clock-names = "pll0_sysclk1", "pll0_sysclk2", + "pll0_sysclk4", "pll0_sysclk6", + "async1"; + }; + pll0: clock-controller@11000 { + compatible = "ti,da850-pll0"; + reg = <0x11000 0x1000>; + clocks = <&ref_clk>, <&pll1_sysclk 3>; + clock-names = "clksrc", "extclksrc"; + + pll0_pllout: pllout { + #clock-cells = <0>; + }; + pll0_sysclk: sysclk { + #clock-cells = <1>; + }; + pll0_auxclk: auxclk { + #clock-cells = <0>; + }; + pll0_obsclk: obsclk { + #clock-cells = <0>; + }; + }; pmx_core: pinmux@14120 { compatible = "pinctrl-single"; reg = <0x14120 0x50>; @@ -281,8 +334,41 @@ usb_phy: usb-phy { compatible = "ti,da830-usb-phy"; #phy-cells = <1>; + clocks = <&usb_phy_clk 0>, <&usb_phy_clk 1>; + clock-names = "usb0_clk48", "usb1_clk48"; status = "disabled"; }; + usb_phy_clk: usb-phy-clocks { + compatible = "ti,da830-usb-phy-clocks"; + #clock-cells = <1>; + clocks = <&psc1 1>, <&usb_refclkin>, + <&pll0_auxclk>; + clock-names = "fck", "usb_refclkin", "auxclk"; + }; + ehrpwm_tbclk: ehrpwm_tbclk { + compatible = "ti,da830-tbclksync"; + #clock-cells = <0>; + clocks = <&psc1 17>; + clock-names = "fck"; + }; + div4p5_clk: div4.5 { + compatible = "ti,da830-div4p5ena"; + #clock-cells = <0>; + clocks = <&pll0_pllout>; + clock-names = "pll0_pllout"; + }; + async1_clk: async1 { + compatible = "ti,da850-async1-clksrc"; + #clock-cells = <0>; + clocks = <&pll0_sysclk 3>, <&div4p5_clk>; + clock-names = "pll0_sysclk3", "div4.5"; + }; + async3_clk: async3 { + compatible = "ti,da850-async3-clksrc"; + #clock-cells = <0>; + clocks = <&pll0_sysclk 2>, <&pll1_sysclk 2>; + clock-names = "pll0_sysclk2", "pll1_sysclk2"; + }; }; edma0: edma@0 { compatible = "ti,edma3-tpcc"; @@ -294,18 +380,21 @@ #dma-cells = <2>; ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>; + power-domains = <&psc0 0>; }; edma0_tptc0: tptc@8000 { compatible = "ti,edma3-tptc"; reg = <0x8000 0x400>; interrupts = <13>; interrupt-names = "edm3_tcerrint"; + power-domains = <&psc0 1>; }; edma0_tptc1: tptc@8400 { compatible = "ti,edma3-tptc"; reg = <0x8400 0x400>; interrupts = <32>; interrupt-names = "edm3_tcerrint"; + power-domains = <&psc0 2>; }; edma1: edma@230000 { compatible = "ti,edma3-tpcc"; @@ -317,12 +406,14 @@ #dma-cells = <2>; ti,tptcs = <&edma1_tptc0 7>; + power-domains = <&psc1 0>; }; edma1_tptc0: tptc@238000 { compatible = "ti,edma3-tptc"; reg = <0x238000 0x400>; interrupts = <95>; interrupt-names = "edm3_tcerrint"; + power-domains = <&psc1 21>; }; serial0: serial@42000 { compatible = "ti,da830-uart", "ns16550a"; @@ -330,6 +421,8 @@ reg-io-width = <4>; reg-shift = <2>; interrupts = <25>; + clocks = <&psc0 9>; + power-domains = <&psc0 9>; status = "disabled"; }; serial1: serial@10c000 { @@ -338,6 +431,8 @@ reg-io-width = <4>; reg-shift = <2>; interrupts = <53>; + clocks = <&psc1 12>; + power-domains = <&psc1 12>; status = "disabled"; }; serial2: serial@10d000 { @@ -346,6 +441,8 @@ reg-io-width = <4>; reg-shift = <2>; interrupts = <61>; + clocks = <&psc1 13>; + power-domains = <&psc1 13>; status = "disabled"; }; rtc0: rtc@23000 { @@ -353,6 +450,8 @@ reg = <0x23000 0x1000>; interrupts = <19 19>; + clocks = <&pll0_auxclk>; + clock-names = "int-clk"; status = "disabled"; }; i2c0: i2c@22000 { @@ -361,6 +460,7 @@ interrupts = <15>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pll0_auxclk>; status = "disabled"; }; i2c1: i2c@228000 { @@ -369,11 +469,21 @@ interrupts = <51>; #address-cells = <1>; #size-cells = <0>; + clocks = <&psc1 11>; + power-domains = <&psc1 11>; status = "disabled"; }; + clocksource: timer@20000 { + compatible = "ti,da830-timer"; + reg = <0x20000 0x1000>; + interrupts = <12>, <13>; + interrupt-names = "tint12", "tint34"; + clocks = <&pll0_auxclk>; + }; wdt: wdt@21000 { compatible = "ti,davinci-wdt"; reg = <0x21000 0x1000>; + clocks = <&pll0_auxclk>; status = "disabled"; }; mmc0: mmc@40000 { @@ -384,12 +494,14 @@ interrupts = <16>; dmas = <&edma0 16 0>, <&edma0 17 0>; dma-names = "rx", "tx"; + clocks = <&psc0 5>; status = "disabled"; }; vpif: video@217000 { compatible = "ti,da850-vpif"; reg = <0x217000 0x1000>; interrupts = <92>; + power-domains = <&psc1 9>; status = "disabled"; /* VPIF capture port */ @@ -412,6 +524,7 @@ interrupts = <72>; dmas = <&edma1 28 0>, <&edma1 29 0>; dma-names = "rx", "tx"; + clocks = <&psc1 18>; status = "disabled"; }; ehrpwm0: pwm@300000 { @@ -419,6 +532,9 @@ "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x300000 0x2000>; + clocks = <&psc1 17>, <&ehrpwm_tbclk>; + clock-names = "fck", "tbclk"; + power-domains = <&psc1 17>; status = "disabled"; }; ehrpwm1: pwm@302000 { @@ -426,6 +542,9 @@ "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x302000 0x2000>; + clocks = <&psc1 17>, <&ehrpwm_tbclk>; + clock-names = "fck", "tbclk"; + power-domains = <&psc1 17>; status = "disabled"; }; ecap0: ecap@306000 { @@ -433,6 +552,9 @@ "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x306000 0x80>; + clocks = <&psc1 20>; + clock-names = "fck"; + power-domains = <&psc1 20>; status = "disabled"; }; ecap1: ecap@307000 { @@ -440,6 +562,9 @@ "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x307000 0x80>; + clocks = <&psc1 20>; + clock-names = "fck"; + power-domains = <&psc1 20>; status = "disabled"; }; ecap2: ecap@308000 { @@ -447,6 +572,9 @@ "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x308000 0x80>; + clocks = <&psc1 20>; + clock-names = "fck"; + power-domains = <&psc1 20>; status = "disabled"; }; spi0: spi@41000 { @@ -459,6 +587,8 @@ interrupts = <20>; dmas = <&edma0 14 0>, <&edma0 15 0>; dma-names = "rx", "tx"; + clocks = <&psc0 4>; + power-domains = <&psc0 4>; status = "disabled"; }; spi1: spi@30e000 { @@ -471,6 +601,8 @@ interrupts = <56>; dmas = <&edma0 18 0>, <&edma0 19 0>; dma-names = "rx", "tx"; + clocks = <&psc1 10>; + power-domains = <&psc1 10>; status = "disabled"; }; usb0: usb@200000 { @@ -482,6 +614,8 @@ dr_mode = "otg"; phys = <&usb_phy 0>; phy-names = "usb-phy"; + clocks = <&psc1 1>; + clock-ranges; status = "disabled"; #address-cells = <1>; @@ -505,6 +639,7 @@ interrupts = <58>; #dma-cells = <2>; #dma-channels = <4>; + power-domains = <&psc1 1>; status = "okay"; }; }; @@ -512,13 +647,31 @@ compatible = "ti,da850-ahci"; reg = <0x218000 0x2000>, <0x22c018 0x4>; interrupts = <67>; + clocks = <&psc1 8>, <&sata_refclk>; + clock-names = "fck", "refclk"; status = "disabled"; }; + pll1: clock-controller@21a000 { + compatible = "ti,da850-pll1"; + reg = <0x21a000 0x1000>; + clocks = <&ref_clk>; + clock-names = "clksrc"; + + pll1_sysclk: sysclk { + #clock-cells = <1>; + }; + pll1_obsclk: obsclk { + #clock-cells = <0>; + }; + }; mdio: mdio@224000 { compatible = "ti,davinci_mdio"; #address-cells = <1>; #size-cells = <0>; reg = <0x224000 0x1000>; + clocks = <&psc1 5>; + clock-names = "fck"; + power-domains = <&psc1 5>; status = "disabled"; }; eth0: ethernet@220000 { @@ -534,6 +687,8 @@ 35 36 >; + clocks = <&psc1 5>; + power-domains = <&psc1 5>; status = "disabled"; }; usb1: usb@225000 { @@ -542,6 +697,7 @@ interrupts = <59>; phys = <&usb_phy 1>; phy-names = "usb-phy"; + clocks = <&psc1 2>; status = "disabled"; }; gpio: gpio@226000 { @@ -549,13 +705,11 @@ gpio-controller; #gpio-cells = <2>; reg = <0x226000 0x1000>; - interrupts = <42 IRQ_TYPE_EDGE_BOTH - 43 IRQ_TYPE_EDGE_BOTH 44 IRQ_TYPE_EDGE_BOTH - 45 IRQ_TYPE_EDGE_BOTH 46 IRQ_TYPE_EDGE_BOTH - 47 IRQ_TYPE_EDGE_BOTH 48 IRQ_TYPE_EDGE_BOTH - 49 IRQ_TYPE_EDGE_BOTH 50 IRQ_TYPE_EDGE_BOTH>; + interrupts = <42 43 44 45 46 47 48 49 50>; ti,ngpio = <144>; ti,davinci-gpio-unbanked = <0>; + clocks = <&psc1 3>; + clock-names = "gpio"; status = "disabled"; interrupt-controller; #interrupt-cells = <2>; @@ -704,6 +858,17 @@ <&pmx_core 142 147 1>, <&pmx_core 143 146 1>; }; + psc1: clock-controller@227000 { + compatible = "ti,da850-psc1"; + reg = <0x227000 0x1000>; + #clock-cells = <1>; + #power-domain-cells = <1>; + clocks = <&pll0_sysclk 2>, <&pll0_sysclk 4>, + <&async3_clk>; + clock-names = "pll0_sysclk2", "pll0_sysclk4", "async3"; + assigned-clocks = <&async3_clk>; + assigned-clock-parents = <&pll1_sysclk 2>; + }; pinconf: pin-controller@22c00c { compatible = "ti,da850-pupd"; reg = <0x22c00c 0x8>; @@ -717,6 +882,7 @@ reg-names = "mpu", "dat"; interrupts = <54>; interrupt-names = "common"; + power-domains = <&psc1 7>; status = "disabled"; dmas = <&edma0 1 1>, <&edma0 0 1>; @@ -728,6 +894,9 @@ reg = <0x213000 0x1000>; interrupts = <52>; max-pixelclock = <37500>; + clocks = <&psc1 16>; + clock-names = "fck"; + power-domains = <&psc1 16>; status = "disabled"; }; }; @@ -739,6 +908,9 @@ reg = <0x68000000 0x00008000>; ranges = <0 0 0x60000000 0x08000000 1 0 0x68000000 0x00008000>; + clocks = <&psc0 3>; + clock-names = "aemif"; + clock-ranges; status = "disabled"; }; memctrl: memory-controller@b0000000 { diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi index 33230c8b2951..7e18147dc563 100644 --- a/arch/arm/boot/dts/dra7-evm-common.dtsi +++ b/arch/arm/boot/dts/dra7-evm-common.dtsi @@ -20,6 +20,11 @@ id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; }; + extcon_usb2: extcon_usb2 { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; + }; + sound0: sound0 { compatible = "simple-audio-card"; simple-audio-card,name = "DRA7xx-EVM"; @@ -198,8 +203,13 @@ extcon = <&extcon_usb1>; }; +&omap_dwc3_2 { + extcon = <&extcon_usb2>; +}; + &usb2 { dr_mode = "host"; + extcon = <&extcon_usb2>; }; &atl { diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 0894593860d6..6ed5f9156270 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -106,11 +106,6 @@ enable-active-high; }; - extcon_usb2: extcon_usb2 { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; - }; - vtt_fixed: fixedregulator-vtt { compatible = "regulator-fixed"; regulator-name = "vtt_fixed"; @@ -406,10 +401,6 @@ vdd-supply = <&smps123_reg>; }; -&omap_dwc3_2 { - extcon = <&extcon_usb2>; -}; - &elm { status = "okay"; }; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 9dcd14edc202..93fc2d79d337 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1893,7 +1893,7 @@ }; }; - dcan1: can@481cc000 { + dcan1: can@4ae3c000 { compatible = "ti,dra7-d_can"; ti,hwmods = "dcan1"; reg = <0x4ae3c000 0x2000>; @@ -1903,7 +1903,7 @@ status = "disabled"; }; - dcan2: can@481d0000 { + dcan2: can@48480000 { compatible = "ti,dra7-d_can"; ti,hwmods = "dcan2"; reg = <0x48480000 0x2000>; diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts index b7aeaeeead3b..c471bf3277b4 100644 --- a/arch/arm/boot/dts/dra71-evm.dts +++ b/arch/arm/boot/dts/dra71-evm.dts @@ -265,3 +265,11 @@ /* Supplied by VDA_1V8_PHY */ vdda_video-supply = <&lp8732_ldo1_reg>; }; + +&extcon_usb1 { + vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>; +}; + +&extcon_usb2 { + vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index df174f5c15d1..e297b923b71a 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -391,6 +391,7 @@ &usb2 { dr_mode = "host"; + extcon = <&extcon_usb2>; }; &mmc1 { diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index 91e93ab588ca..8f9df09155d8 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -18,6 +18,16 @@ compatible = "arm,cortex-a15"; reg = <1>; operating-points-v2 = <&cpu0_opp_table>; + + clocks = <&dpll_mpu_ck>; + clock-names = "cpu"; + + clock-latency = <300000>; /* From omap-cpufreq driver */ + + /* cooling options */ + #cooling-cells = <2>; /* min followed by max */ + + vbb-supply = <&abb_mpu>; }; }; diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts index c07f0051844d..5a46163d465f 100644 --- a/arch/arm/boot/dts/dra76-evm.dts +++ b/arch/arm/boot/dts/dra76-evm.dts @@ -436,3 +436,17 @@ phys = <&pcie1_phy>, <&pcie2_phy>; phy-names = "pcie-phy0", "pcie-phy1"; }; + +&extcon_usb1 { + vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>; +}; + +&extcon_usb2 { + vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>; +}; + +&m_can0 { + can-transceiver { + max-bitrate = <5000000>; + }; +}; diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi index 1c88c581ff18..613e4dc0ed3e 100644 --- a/arch/arm/boot/dts/dra76x.dtsi +++ b/arch/arm/boot/dts/dra76x.dtsi @@ -11,9 +11,73 @@ / { compatible = "ti,dra762", "ti,dra7"; + ocp { + target-module@42c01900 { + compatible = "ti,sysc-dra7-mcan", "ti,sysc"; + ranges = <0x0 0x42c00000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x42c01900 0x4>, + <0x42c01904 0x4>, + <0x42c01908 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET | + SYSC_DRA7_MCAN_ENAWAKEUP)>; + ti,syss-mask = <1>; + clocks = <&wkupaon_clkctrl DRA7_ADC_CLKCTRL 0>; + clock-names = "fck"; + + m_can0: mcan@1a00 { + compatible = "bosch,m_can"; + reg = <0x1a00 0x4000>, <0x0 0x18FC>; + reg-names = "m_can", "message_ram"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&mcan_clk>, <&l3_iclk_div>; + clock-names = "cclk", "hclk"; + bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>; + }; + }; + }; + }; /* MCAN interrupts are hard-wired to irqs 67, 68 */ &crossbar_mpu { ti,irqs-skip = <10 67 68 133 139 140>; }; + +&scm_conf_clocks { + dpll_gmac_h14x2_ctrl_ck: dpll_gmac_h14x2_ctrl_ck@3fc { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_gmac_x2_ck>; + ti,max-div = <63>; + reg = <0x03fc>; + ti,bit-shift=<20>; + ti,latch-bit=<26>; + assigned-clocks = <&dpll_gmac_h14x2_ctrl_ck>; + assigned-clock-rates = <80000000>; + }; + + dpll_gmac_h14x2_ctrl_mux_ck: dpll_gmac_h14x2_ctrl_mux_ck@3fc { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&dpll_gmac_ck>, <&dpll_gmac_h14x2_ctrl_ck>; + reg = <0x3fc>; + ti,bit-shift = <29>; + ti,latch-bit=<26>; + assigned-clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>; + assigned-clock-parents = <&dpll_gmac_h14x2_ctrl_ck>; + }; + + mcan_clk: mcan_clk@3fc { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>; + ti,bit-shift = <27>; + reg = <0x3fc>; + }; +}; diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index 0af44b7eadb9..1bb8e5c9d029 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the KZM9D board * * Copyright (C) 2013 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index fec1241b858f..373ea8720769 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the EMEV2 SoC * * Copyright (C) 2012 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 962af97c1883..27a1ee28c3bb 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -78,6 +78,22 @@ compatible = "arm,cortex-a7"; reg = <1>; clock-frequency = <1000000000>; + clocks = <&cmu CLK_ARM_CLK>; + clock-names = "cpu"; + #cooling-cells = <2>; + + operating-points = < + 1000000 1150000 + 900000 1112500 + 800000 1075000 + 700000 1037500 + 600000 1000000 + 500000 962500 + 400000 925000 + 300000 887500 + 200000 850000 + 100000 850000 + >; }; }; @@ -226,7 +242,7 @@ interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_TMU_APBIF>; clock-names = "tmu_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index dfe41b698745..6085e92ac2d7 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -735,7 +735,7 @@ reg = <0x100C0000 0x100>; interrupts = <2 4>; status = "disabled"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; jpeg_codec: jpeg-codec@11840000 { diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 88fb47cef9a8..b6091c27f155 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -55,6 +55,19 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0x901>; + clocks = <&clock CLK_ARM_CLK>; + clock-names = "cpu"; + clock-latency = <160000>; + + operating-points = < + 1200000 1250000 + 1000000 1150000 + 800000 1075000 + 500000 975000 + 400000 975000 + 200000 950000 + >; + #cooling-cells = <2>; /* min followed by max */ }; }; diff --git a/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi deleted file mode 100644 index 489b58c619ee..000000000000 --- a/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi +++ /dev/null @@ -1,20 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device tree sources for Exynos4412 TMU sensor configuration - * - * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> - */ - -#include <dt-bindings/thermal/thermal_exynos.h> - -#thermal-sensor-cells = <0>; -samsung,tmu_gain = <8>; -samsung,tmu_reference_voltage = <16>; -samsung,tmu_noise_cancel_mode = <4>; -samsung,tmu_efuse_value = <55>; -samsung,tmu_min_efuse_value = <40>; -samsung,tmu_max_efuse_value = <100>; -samsung,tmu_first_point_trim = <25>; -samsung,tmu_second_point_trim = <85>; -samsung,tmu_default_temp_offset = <50>; -samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 7b43c10c510b..51f72f0327e5 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -49,21 +49,30 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA01>; + clocks = <&clock CLK_ARM_CLK>; + clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; /* min followed by max */ }; cpu@a02 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA02>; + clocks = <&clock CLK_ARM_CLK>; + clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; /* min followed by max */ }; cpu@a03 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA03>; + clocks = <&clock CLK_ARM_CLK>; + clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; /* min followed by max */ }; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 2daf505b3d08..da163a40af15 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -84,6 +84,29 @@ compatible = "arm,cortex-a15"; reg = <1>; clock-frequency = <1700000000>; + clocks = <&clock CLK_ARM_CLK>; + clock-names = "cpu"; + clock-latency = <140000>; + + operating-points = < + 1700000 1300000 + 1600000 1250000 + 1500000 1225000 + 1400000 1200000 + 1300000 1150000 + 1200000 1125000 + 1100000 1100000 + 1000000 1075000 + 900000 1050000 + 800000 1025000 + 700000 1012500 + 600000 1000000 + 500000 975000 + 400000 950000 + 300000 937500 + 200000 925000 + >; + #cooling-cells = <2>; /* min followed by max */ }; }; @@ -278,7 +301,7 @@ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; sata: sata@122f0000 { diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index 20e789ea136f..57fc9c949e54 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -93,7 +93,7 @@ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; tmu_cpu1: tmu@10064000 { @@ -102,7 +102,7 @@ interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; tmu_cpu2: tmu@10068000 { @@ -111,7 +111,7 @@ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; tmu_cpu3: tmu@1006c000 { @@ -120,7 +120,7 @@ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; mmc_0: mmc@12200000 { diff --git a/arch/arm/boot/dts/exynos5420-cpus.dtsi b/arch/arm/boot/dts/exynos5420-cpus.dtsi index a8e449471304..0ee6e92a3c29 100644 --- a/arch/arm/boot/dts/exynos5420-cpus.dtsi +++ b/arch/arm/boot/dts/exynos5420-cpus.dtsi @@ -38,6 +38,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x1>; + clocks = <&clock CLK_ARM_CLK>; clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; @@ -49,6 +50,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x2>; + clocks = <&clock CLK_ARM_CLK>; clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; @@ -60,6 +62,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x3>; + clocks = <&clock CLK_ARM_CLK>; clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; @@ -83,6 +86,7 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x101>; + clocks = <&clock CLK_KFC_CLK>; clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; @@ -94,6 +98,7 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x102>; + clocks = <&clock CLK_KFC_CLK>; clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; @@ -105,6 +110,7 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x103>; + clocks = <&clock CLK_KFC_CLK>; clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; diff --git a/arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi deleted file mode 100644 index fbc77cb58473..000000000000 --- a/arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi +++ /dev/null @@ -1,21 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device tree sources for Exynos5420 TMU sensor configuration - * - * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> - * Copyright (c) 2017 Krzysztof Kozlowski <krzk@kernel.org> - */ - -#include <dt-bindings/thermal/thermal_exynos.h> - -#thermal-sensor-cells = <0>; -samsung,tmu_gain = <8>; -samsung,tmu_reference_voltage = <16>; -samsung,tmu_noise_cancel_mode = <4>; -samsung,tmu_efuse_value = <55>; -samsung,tmu_min_efuse_value = <0>; -samsung,tmu_max_efuse_value = <100>; -samsung,tmu_first_point_trim = <25>; -samsung,tmu_second_point_trim = <85>; -samsung,tmu_default_temp_offset = <50>; -samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index f4e8c5823bc2..aaff15880761 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -738,7 +738,7 @@ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; - #include "exynos5420-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; tmu_cpu1: tmu@10064000 { @@ -747,7 +747,7 @@ interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; - #include "exynos5420-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; tmu_cpu2: tmu@10068000 { @@ -756,7 +756,7 @@ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>, <&clock CLK_TMU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; - #include "exynos5420-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; tmu_cpu3: tmu@1006c000 { @@ -765,7 +765,7 @@ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; - #include "exynos5420-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; tmu_gpu: tmu@100a0000 { @@ -774,7 +774,7 @@ interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; - #include "exynos5420-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; sysmmu_g2dr: sysmmu@10a60000 { diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi index 7c130a00d1a8..e4a5857c135f 100644 --- a/arch/arm/boot/dts/exynos5422-cpus.dtsi +++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi @@ -37,6 +37,7 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x101>; + clocks = <&clock CLK_KFC_CLK>; clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; @@ -48,6 +49,7 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x102>; + clocks = <&clock CLK_KFC_CLK>; clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; @@ -59,6 +61,7 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x103>; + clocks = <&clock CLK_KFC_CLK>; clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; @@ -69,8 +72,8 @@ cpu4: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a15"; - clocks = <&clock CLK_ARM_CLK>; reg = <0x0>; + clocks = <&clock CLK_ARM_CLK>; clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; @@ -82,6 +85,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x1>; + clocks = <&clock CLK_ARM_CLK>; clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; @@ -93,6 +97,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x2>; + clocks = <&clock CLK_ARM_CLK>; clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; @@ -104,6 +109,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x3>; + clocks = <&clock CLK_ARM_CLK>; clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; diff --git a/arch/arm/boot/dts/gemini-sl93512r.dts b/arch/arm/boot/dts/gemini-sl93512r.dts new file mode 100644 index 000000000000..ebefb7297379 --- /dev/null +++ b/arch/arm/boot/dts/gemini-sl93512r.dts @@ -0,0 +1,328 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree file for the Storm Semiconductor SL93512R_BRD + * Gemini reference design, also initially called + * "Gemini324 EV-Board" before Storm acquired Storlink Semiconductor. + * The series were later acquired by Cortina Systems. + */ + +/dts-v1/; + +#include "gemini.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "Storlink Semiconductor Gemini324 EV-Board / Storm Semiconductor SL93512R_BRD"; + compatible = "storlink,gemini324", "storm,sl93512r", "cortina,gemini"; + #address-cells = <1>; + #size-cells = <1>; + + memory@0 { + /* 64 MB Samsung K4H511638B */ + device_type = "memory"; + reg = <0x00000000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait"; + stdout-path = &uart0; + }; + + gpio_keys { + compatible = "gpio-keys"; + + button-wps { + debounce-interval = <50>; + wakeup-source; + linux,code = <KEY_WPS_BUTTON>; + label = "WPS"; + /* Conflict with NAND flash */ + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; + + button-setup { + debounce-interval = <50>; + wakeup-source; + linux,code = <KEY_SETUP>; + label = "factory reset"; + /* Conflict with NAND flash */ + gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + led-green-harddisk { + label = "sq201:green:harddisk"; + /* Conflict with LCD (no problem) */ + gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "disk-activity"; + }; + led-green-wireless { + label = "sq201:green:wireless"; + /* Conflict with NAND flash CE0 (no problem) */ + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + /* Uses MDC and MDIO */ + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ + <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ + #address-cells = <1>; + #size-cells = <0>; + + /* This is a Marvell 88E1111 ethernet transciever */ + phy0: ethernet-phy@1 { + reg = <1>; + }; + }; + + spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + /* Check pin collisions */ + gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>; + gpio-miso = <&gpio1 30 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio1 29 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + + switch@0 { + compatible = "vitesse,vsc7385"; + reg = <0>; + /* Specified for 2.5 MHz or below */ + spi-max-frequency = <2500000>; + gpio-controller; + #gpio-cells = <2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + port@1 { + reg = <1>; + label = "lan2"; + }; + port@2 { + reg = <2>; + label = "lan3"; + }; + port@3 { + reg = <3>; + label = "lan4"; + }; + vsc: port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + }; + }; + + + soc { + flash@30000000 { + status = "okay"; + /* 16MB of flash */ + reg = <0x30000000 0x01000000>; + + partition@0 { + label = "BOOT"; + reg = <0x00000000 0x00020000>; + read-only; + }; + partition@120000 { + label = "Kern"; + reg = <0x00020000 0x00300000>; + }; + partition@320000 { + label = "Ramdisk"; + reg = <0x00320000 0x00600000>; + }; + partition@920000 { + label = "Application"; + reg = <0x00920000 0x00600000>; + }; + partition@f20000 { + label = "VCTL"; + reg = <0x00f20000 0x00020000>; + read-only; + }; + partition@f40000 { + label = "CurConf"; + reg = <0x00f40000 0x000a0000>; + read-only; + }; + partition@fe0000 { + label = "FIS directory"; + reg = <0x00fe0000 0x00020000>; + read-only; + }; + }; + + syscon: syscon@40000000 { + pinctrl { + /* + * gpio0egrp cover line 16 used by HD LED + * gpio0fgrp cover line 17, 18 used by wireless LED and reset button + * gpio0hgrp cover line 21, 22 used by MDIO for Marvell PHY + * gpio0kgrp cover line 31 used by USB LED + */ + gpio0_default_pins: pinctrl-gpio0 { + mux { + function = "gpio0"; + groups = "gpio0egrp", + "gpio0fgrp", + "gpio0hgrp"; + }; + }; + /* + * gpio1dgrp cover lines used by SPI for + * the Vitesse chip (28-31) + */ + gpio1_default_pins: pinctrl-gpio1 { + mux { + function = "gpio1"; + groups = "gpio1dgrp"; + }; + }; + pinctrl-gmii { + mux { + function = "gmii"; + groups = "gmii_gmac0_grp", "gmii_gmac1_grp"; + }; + /* Control pad skew comes from sl_switch.c in the vendor code */ + conf0 { + pins = "P10 GMAC1 TXC"; + skew-delay = <5>; + }; + conf1 { + pins = "V11 GMAC1 TXEN"; + skew-delay = <7>; + }; + conf2 { + pins = "T11 GMAC1 RXC"; + skew-delay = <8>; + }; + conf3 { + pins = "U11 GMAC1 RXDV"; + skew-delay = <7>; + }; + conf4 { + pins = "V7 GMAC0 TXC"; + skew-delay = <10>; + }; + conf5 { + pins = "P8 GMAC0 TXEN"; + skew-delay = <7>; /* 5 at another place? */ + }; + conf6 { + pins = "T8 GMAC0 RXC"; + skew-delay = <15>; + }; + conf7 { + pins = "R8 GMAC0 RXDV"; + skew-delay = <0>; + }; + conf8 { + /* The data lines all have default skew */ + pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1", + "P9 GMAC0 RXD2", "R9 GMAC0 RXD3", + "R11 GMAC1 RXD0", "P11 GMAC1 RXD1", + "V12 GMAC1 RXD2", "U12 GMAC1 RXD3", + "R10 GMAC1 TXD0", "T10 GMAC1 TXD1", + "U10 GMAC1 TXD2", "V10 GMAC1 TXD3"; + skew-delay = <7>; + }; + /* Appears in sl351x_gmac.c in the vendor code */ + conf9 { + pins = "U7 GMAC0 TXD0", "T7 GMAC0 TXD1", + "R7 GMAC0 TXD2", "P7 GMAC0 TXD3"; + skew-delay = <5>; + }; + }; + }; + }; + + /* Both interfaces brought out on SATA connectors */ + sata: sata@46000000 { + cortina,gemini-ata-muxmode = <0>; + cortina,gemini-enable-sata-bridge; + status = "okay"; + }; + + gpio0: gpio@4d000000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio0_default_pins>; + }; + + gpio1: gpio@4e000000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio1_default_pins>; + }; + + pci@50000000 { + status = "okay"; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = + <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ + <0x4800 0 0 2 &pci_intc 1>, + <0x4800 0 0 3 &pci_intc 2>, + <0x4800 0 0 4 &pci_intc 3>, + <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ + <0x5000 0 0 2 &pci_intc 2>, + <0x5000 0 0 3 &pci_intc 3>, + <0x5000 0 0 4 &pci_intc 0>, + <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ + <0x5800 0 0 2 &pci_intc 3>, + <0x5800 0 0 3 &pci_intc 0>, + <0x5800 0 0 4 &pci_intc 1>, + <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ + <0x6000 0 0 2 &pci_intc 0>, + <0x6000 0 0 3 &pci_intc 1>, + <0x6000 0 0 4 &pci_intc 2>; + }; + + ethernet@60000000 { + status = "okay"; + + ethernet-port@0 { + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + ethernet-port@1 { + phy-mode = "rgmii"; + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + + ata@63000000 { + status = "okay"; + }; + + ata@63400000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts index e5cf9d1a98cd..3787cf3763c4 100644 --- a/arch/arm/boot/dts/gemini-sq201.dts +++ b/arch/arm/boot/dts/gemini-sq201.dts @@ -55,6 +55,75 @@ }; }; + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + /* Uses MDC and MDIO */ + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ + <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ + #address-cells = <1>; + #size-cells = <0>; + + /* This is a Marvell 88E1111 ethernet transciever */ + phy0: ethernet-phy@1 { + reg = <1>; + }; + }; + + spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + /* Check pin collisions */ + gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>; + gpio-miso = <&gpio1 30 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio1 29 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + + switch@0 { + compatible = "vitesse,vsc7395"; + reg = <0>; + /* Specified for 2.5 MHz or below */ + spi-max-frequency = <2500000>; + gpio-controller; + #gpio-cells = <2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + port@1 { + reg = <1>; + label = "lan2"; + }; + port@2 { + reg = <2>; + label = "lan3"; + }; + port@3 { + reg = <3>; + label = "lan4"; + }; + vsc: port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + }; + }; + + soc { flash@30000000 { /* @@ -108,6 +177,7 @@ /* * gpio0fgrp cover line 18 used by reset button * gpio0ggrp cover line 20 used by info LED + * gpio0hgrp cover line 21, 22 used by MDIO for Marvell PHY * gpio0kgrp cover line 31 used by USB LED */ gpio0_default_pins: pinctrl-gpio0 { @@ -115,9 +185,76 @@ function = "gpio0"; groups = "gpio0fgrp", "gpio0ggrp", + "gpio0hgrp", "gpio0kgrp"; }; }; + /* + * gpio0dgrp cover lines used by the SPI + * to the Vitesse G5x chip. + */ + gpio1_default_pins: pinctrl-gpio1 { + mux { + function = "gpio1"; + groups = "gpio1dgrp"; + }; + }; + pinctrl-gmii { + mux { + function = "gmii"; + groups = "gmii_gmac0_grp", "gmii_gmac1_grp"; + }; + /* Settings come from memory dump in PLATO */ + conf0 { + pins = "V8 GMAC0 RXDV"; + skew-delay = <0>; + }; + conf1 { + pins = "Y7 GMAC0 RXC"; + skew-delay = <15>; + }; + conf2 { + pins = "T8 GMAC0 TXEN"; + skew-delay = <7>; + }; + conf3 { + pins = "U8 GMAC0 TXC"; + skew-delay = <10>; + }; + conf4 { + pins = "T10 GMAC1 RXDV"; + skew-delay = <7>; + }; + conf5 { + pins = "Y11 GMAC1 RXC"; + skew-delay = <8>; + }; + conf6 { + pins = "W11 GMAC1 TXEN"; + skew-delay = <7>; + }; + conf7 { + pins = "V11 GMAC1 TXC"; + skew-delay = <5>; + }; + conf8 { + /* The data lines all have default skew */ + pins = "W8 GMAC0 RXD0", "V9 GMAC0 RXD1", + "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3", + "T7 GMAC0 TXD0", "U6 GMAC0 TXD1", + "V7 GMAC0 TXD2", "U7 GMAC0 TXD3", + "Y12 GMAC1 RXD0", "V12 GMAC1 RXD1", + "T11 GMAC1 RXD2", "W12 GMAC1 RXD3", + "U10 GMAC1 TXD0", "Y10 GMAC1 TXD1", + "W10 GMAC1 TXD2", "T9 GMAC1 TXD3"; + skew-delay = <7>; + }; + /* Set up drive strength on GMAC0 and GMAC1 to 16 mA */ + conf9 { + groups = "gmii_gmac0_grp", "gmii_gmac1_grp"; + drive-strength = <16>; + }; + }; }; }; @@ -132,6 +269,11 @@ pinctrl-0 = <&gpio0_default_pins>; }; + gpio1: gpio@4e000000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio1_default_pins>; + }; + pci@50000000 { status = "okay"; interrupt-map-mask = <0xf800 0 0 7>; @@ -154,6 +296,23 @@ <0x6000 0 0 4 &pci_intc 2>; }; + ethernet@60000000 { + status = "okay"; + + ethernet-port@0 { + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + ethernet-port@1 { + phy-mode = "rgmii"; + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + ata@63000000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/gr-peach-audiocamerashield.dtsi b/arch/arm/boot/dts/gr-peach-audiocamerashield.dtsi new file mode 100644 index 000000000000..e31a9e3c18a2 --- /dev/null +++ b/arch/arm/boot/dts/gr-peach-audiocamerashield.dtsi @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the GR-Peach audiocamera shield expansion board + * + * Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@jmondi.org> + */ + +#include "r7s72100.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/r7s72100-pinctrl.h> + +/ { + /* On-board camera clock. */ + camera_clk: camera_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; +}; + +&pinctrl { + i2c1_pins: i2c1 { + /* P1_2 as SCL; P1_3 as SDA */ + pinmux = <RZA1_PINMUX(1, 2, 1)>, <RZA1_PINMUX(1, 3, 1)>; + }; + + vio_pins: vio { + /* CEU pins: VIO_D[0-10], VIO_VD, VIO_HD, VIO_CLK */ + pinmux = <RZA1_PINMUX(1, 0, 5)>, /* VIO_VD */ + <RZA1_PINMUX(1, 1, 5)>, /* VIO_HD */ + <RZA1_PINMUX(2, 0, 7)>, /* VIO_D0 */ + <RZA1_PINMUX(2, 1, 7)>, /* VIO_D1 */ + <RZA1_PINMUX(2, 2, 7)>, /* VIO_D2 */ + <RZA1_PINMUX(2, 3, 7)>, /* VIO_D3 */ + <RZA1_PINMUX(2, 4, 7)>, /* VIO_D4 */ + <RZA1_PINMUX(2, 5, 7)>, /* VIO_D5 */ + <RZA1_PINMUX(2, 6, 7)>, /* VIO_D6 */ + <RZA1_PINMUX(2, 7, 7)>, /* VIO_D7 */ + <RZA1_PINMUX(10, 0, 6)>; /* VIO_CLK */ + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + status = "okay"; + clock-frequency = <100000>; + + camera@48 { + compatible = "aptina,mt9v111"; + reg = <0x48>; + + clocks = <&camera_clk>; + + port { + mt9v111_out: endpoint { + remote-endpoint = <&ceu_in>; + }; + }; + }; +}; + +&ceu { + pinctrl-names = "default"; + pinctrl-0 = <&vio_pins>; + + status = "okay"; + + port { + ceu_in: endpoint { + hsync-active = <1>; + vsync-active = <1>; + bus-width = <8>; + pclk-sample = <1>; + remote-endpoint = <&mt9v111_out>; + }; + }; +}; diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index ed14aeac0566..50278715de76 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -56,6 +56,16 @@ next-level-cache = <&L2>; clocks = <&a9pll>; clock-names = "cpu"; + operating-points = < + /* kHz ignored */ + 1300000 1000000 + 1200000 1000000 + 1100000 1000000 + 800000 1000000 + 400000 1000000 + 200000 1000000 + >; + clock-latency = <100000>; }; cpu@902 { @@ -65,6 +75,16 @@ next-level-cache = <&L2>; clocks = <&a9pll>; clock-names = "cpu"; + operating-points = < + /* kHz ignored */ + 1300000 1000000 + 1200000 1000000 + 1100000 1000000 + 800000 1000000 + 400000 1000000 + 200000 1000000 + >; + clock-latency = <100000>; }; cpu@903 { @@ -74,6 +94,16 @@ next-level-cache = <&L2>; clocks = <&a9pll>; clock-names = "cpu"; + operating-points = < + /* kHz ignored */ + 1300000 1000000 + 1200000 1000000 + 1100000 1000000 + 800000 1000000 + 400000 1000000 + 200000 1000000 + >; + clock-latency = <100000>; }; }; diff --git a/arch/arm/boot/dts/imx31-lite.dts b/arch/arm/boot/dts/imx31-lite.dts new file mode 100644 index 000000000000..db52ddccabc3 --- /dev/null +++ b/arch/arm/boot/dts/imx31-lite.dts @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (C) 2016-2018 Vladimir Zapolskiy <vz@mleia.com> + +/dts-v1/; + +#include "imx31.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "LogicPD i.MX31 Lite"; + compatible = "logicpd,imx31-lite", "fsl,imx31"; + + chosen { + stdout-path = &uart1; + }; + + memory@80000000 { + reg = <0x80000000 0x8000000>; + }; + + leds { + compatible = "gpio-leds"; + + led0 { + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + }; + + led1 { + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&ata { + status = "okay"; +}; + +&nfc { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + status = "okay"; +}; + +&sdhci1 { + bus-width = <4>; + cd-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&spi2 { + status = "okay"; + + pmic@0 { + compatible = "fsl,mc13783"; + reg = <0>; + spi-cs-high; + spi-max-frequency = <1000000>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + + fsl,mc13xxx-uses-adc; + fsl,mc13xxx-uses-rtc; + + regulators { + sw1a { /* QVCC */ + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + sw1b { /* QVCC */ + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + sw2a { /* 1.8V_DDR, NVCC2, NVCC21 and NVCC22 */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + sw2b { /* NVCC10 */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + violo { /* NVCC1 and NVCC7 */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + viohi { /* VIOHI */ + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + regulator-always-on; + regulator-boot-on; + }; + + vaudio { /* VAUDIO */ + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + }; + + vcam { /* NVCC4 */ + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + vgen { /* NVCC5 / NVCC8 and NVCC6 / NVCC9 */ + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + regulator-always-on; + regulator-boot-on; + }; + + vmmc2 { /* NVCC3 */ + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&uart1 { + uart-has-rtscts; + status = "okay"; +}; + +/* Routed to the extension board */ +&uart2 { + uart-has-rtscts; + status = "okay"; +}; + +/* Routed to the extension board */ +&uart3 { + uart-has-rtscts; + status = "okay"; +}; + +&weim { + status = "okay"; + + nor@0,0 { + compatible = "cfi-flash"; + reg = <0 0x0 0x200000>; + bank-width = <2>; + linux,mtd-name = "physmap-flash.0"; + fsl,weim-cs-timing = <0x0000cf03 0xa0330d01 0x00220800>; + }; + + ethernet@4,0 { + compatible = "smsc,lan9117", "smsc,lan9115"; + reg = <4 0x0 0x100>; + interrupt-parent = <&gpio1>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + phy-mode = "mii"; + reg-io-width = <2>; + smsc,irq-push-pull; + fsl,weim-cs-timing = <0x00008701 0x04000541 0x00010000>; + }; +}; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index 4642c8169a65..ca1419ca303c 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ // +// Copyright 2016-2018 Vladimir Zapolskiy <vz@mleia.com> // Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> / { @@ -15,11 +16,20 @@ memory { device_type = "memory"; }; aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; serial3 = &uart4; serial4 = &uart5; + spi0 = &spi1; + spi1 = &spi2; + spi2 = &spi3; }; cpus { @@ -47,6 +57,14 @@ interrupt-parent = <&avic>; ranges; + iram: iram@1fffc000 { + compatible = "mmio-sram"; + reg = <0x1fffc000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1fffc000 0x4000>; + }; + aips@43f00000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; @@ -54,6 +72,34 @@ reg = <0x43f00000 0x100000>; ranges; + i2c1: i2c@43f80000 { + compatible = "fsl,imx31-i2c", "fsl,imx21-i2c"; + reg = <0x43f80000 0x4000>; + interrupts = <10>; + clocks = <&clks 33>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@43f84000 { + compatible = "fsl,imx31-i2c", "fsl,imx21-i2c"; + reg = <0x43f84000 0x4000>; + interrupts = <3>; + clocks = <&clks 35>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ata: ata@43f8c000 { + compatible = "fsl,imx31-pata", "fsl,imx27-pata"; + reg = <0x43f8c000 0x4000>; + interrupts = <15>; + clocks = <&clks 26>; + status = "disabled"; + }; + uart1: serial@43f90000 { compatible = "fsl,imx31-uart", "fsl,imx21-uart"; reg = <0x43f90000 0x4000>; @@ -72,6 +118,29 @@ status = "disabled"; }; + i2c2: i2c@43f98000 { + compatible = "fsl,imx31-i2c", "fsl,imx21-i2c"; + reg = <0x43f98000 0x4000>; + interrupts = <4>; + clocks = <&clks 34>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@43fa4000 { + compatible = "fsl,imx31-cspi"; + reg = <0x43fa4000 0x4000>; + interrupts = <14>; + clocks = <&clks 10>, <&clks 53>; + clock-names = "ipg", "per"; + dmas = <&sdma 8 8 0>, <&sdma 9 8 0>; + dma-names = "rx", "tx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + kpp: kpp@43fa8000 { compatible = "fsl,imx31-kpp", "fsl,imx21-kpp"; reg = <0x43fa8000 0x4000>; @@ -106,6 +175,28 @@ reg = <0x50000000 0x100000>; ranges; + sdhci1: sdhci@50004000 { + compatible = "fsl,imx31-mmc"; + reg = <0x50004000 0x4000>; + interrupts = <9>; + clocks = <&clks 10>, <&clks 20>; + clock-names = "ipg", "per"; + dmas = <&sdma 20 3 0>; + dma-names = "rx-tx"; + status = "disabled"; + }; + + sdhci2: sdhci@50008000 { + compatible = "fsl,imx31-mmc"; + reg = <0x50008000 0x4000>; + interrupts = <8>; + clocks = <&clks 10>, <&clks 21>; + clock-names = "ipg", "per"; + dmas = <&sdma 21 3 0>; + dma-names = "rx-tx"; + status = "disabled"; + }; + uart3: serial@5000c000 { compatible = "fsl,imx31-uart", "fsl,imx21-uart"; reg = <0x5000c000 0x4000>; @@ -115,6 +206,19 @@ status = "disabled"; }; + spi2: cspi@50010000 { + compatible = "fsl,imx31-cspi"; + reg = <0x50010000 0x4000>; + interrupts = <13>; + clocks = <&clks 10>, <&clks 54>; + clock-names = "ipg", "per"; + dmas = <&sdma 6 8 0>, <&sdma 7 8 0>; + dma-names = "rx", "tx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + iim: iim@5001c000 { compatible = "fsl,imx31-iim", "fsl,imx27-iim"; reg = <0x5001c000 0x1000>; @@ -137,6 +241,19 @@ #clock-cells = <1>; }; + spi3: cspi@53f84000 { + compatible = "fsl,imx31-cspi"; + reg = <0x53f84000 0x4000>; + interrupts = <17>; + clocks = <&clks 10>, <&clks 28>; + clock-names = "ipg", "per"; + dmas = <&sdma 10 8 0>, <&sdma 11 8 0>; + dma-names = "rx", "tx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + gpt: timer@53f90000 { compatible = "fsl,imx31-gpt"; reg = <0x53f90000 0x4000>; @@ -144,6 +261,112 @@ clocks = <&clks 10>, <&clks 22>; clock-names = "ipg", "per"; }; + + gpio3: gpio@53fa4000 { + compatible = "fsl,imx31-gpio"; + reg = <0x53fa4000 0x4000>; + interrupts = <56>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + rng@53fb0000 { + compatible = "fsl,imx31-rnga"; + reg = <0x53fb0000 0x4000>; + interrupts = <22>; + clocks = <&clks 29>; + }; + + gpio1: gpio@53fcc000 { + compatible = "fsl,imx31-gpio"; + reg = <0x53fcc000 0x4000>; + interrupts = <52>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@53fd0000 { + compatible = "fsl,imx31-gpio"; + reg = <0x53fd0000 0x4000>; + interrupts = <51>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + sdma: sdma@53fd4000 { + compatible = "fsl,imx31-sdma"; + reg = <0x53fd4000 0x4000>; + interrupts = <34>; + clocks = <&clks 10>, <&clks 27>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx31.bin"; + }; + + rtc: rtc@53fd8000 { + compatible = "fsl,imx31-rtc", "fsl,imx21-rtc"; + reg = <0x53fd8000 0x4000>; + interrupts = <25>; + clocks = <&clks 2>, <&clks 40>; + clock-names = "ref", "ipg"; + }; + + wdog: wdog@53fdc000 { + compatible = "fsl,imx31-wdt", "fsl,imx21-wdt"; + reg = <0x53fdc000 0x4000>; + clocks = <&clks 41>; + }; + + pwm: pwm@53fe0000 { + compatible = "fsl,imx31-pwm", "fsl,imx27-pwm"; + reg = <0x53fe0000 0x4000>; + interrupts = <26>; + clocks = <&clks 10>, <&clks 42>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + }; + + emi@b8000000 { /* External Memory Interface */ + compatible = "simple-bus"; + reg = <0xb8000000 0x5000>; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + nfc: nand@b8000000 { + compatible = "fsl,imx31-nand", "fsl,imx27-nand"; + reg = <0xb8000000 0x1000>; + interrupts = <33>; + clocks = <&clks 9>; + dmas = <&sdma 30 17 0>; + dma-names = "rx-tx"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + }; + + weim: weim@b8002000 { + compatible = "fsl,imx31-weim", "fsl,imx27-weim"; + reg = <0xb8002000 0x1000>; + clocks = <&clks 56>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0xa0000000 0x08000000 + 1 0 0xa8000000 0x08000000 + 2 0 0xb0000000 0x02000000 + 3 0 0xb2000000 0x02000000 + 4 0 0xb4000000 0x02000000 + 5 0 0xb6000000 0x02000000>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts index f0622ec4ba9c..682a99783ee6 100644 --- a/arch/arm/boot/dts/imx50-evk.dts +++ b/arch/arm/boot/dts/imx50-evk.dts @@ -98,14 +98,6 @@ status = "okay"; }; -&usbh2 { - status = "okay"; -}; - -&usbh3 { - status = "okay"; -}; - &usbotg { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx50-pinfunc.h b/arch/arm/boot/dts/imx50-pinfunc.h index 97e6e7f4ebdd..43863347362e 100644 --- a/arch/arm/boot/dts/imx50-pinfunc.h +++ b/arch/arm/boot/dts/imx50-pinfunc.h @@ -34,7 +34,7 @@ #define MX50_PAD_KEY_ROW1__EIM_NANDF_CEN_1 0x02c 0x2d8 0x000 0x2 0x0 #define MX50_PAD_KEY_ROW1__CTI_TRIGOUT_ACK7 0x02c 0x2d8 0x000 0x6 0x0 #define MX50_PAD_KEY_ROW1__USBPHY1_RXERROR 0x02c 0x2d8 0x000 0x7 0x0 -#define MX50_PAD_KEY_COL2__KPP_COL_1 0x030 0x2dc 0x000 0x0 0x0 +#define MX50_PAD_KEY_COL2__KPP_COL_2 0x030 0x2dc 0x000 0x0 0x0 #define MX50_PAD_KEY_COL2__GPIO4_4 0x030 0x2dc 0x000 0x1 0x0 #define MX50_PAD_KEY_COL2__EIM_NANDF_CEN_2 0x030 0x2dc 0x000 0x2 0x0 #define MX50_PAD_KEY_COL2__CTI_TRIGOUT6 0x030 0x2dc 0x000 0x6 0x0 @@ -44,7 +44,7 @@ #define MX50_PAD_KEY_ROW2__EIM_NANDF_CEN_3 0x034 0x2e0 0x000 0x2 0x0 #define MX50_PAD_KEY_ROW2__CTI_TRIGOUT7 0x034 0x2e0 0x000 0x6 0x0 #define MX50_PAD_KEY_ROW2__USBPHY1_LINESTATE_0 0x034 0x2e0 0x000 0x7 0x0 -#define MX50_PAD_KEY_COL3__KPP_COL_2 0x038 0x2e4 0x000 0x0 0x0 +#define MX50_PAD_KEY_COL3__KPP_COL_3 0x038 0x2e4 0x000 0x0 0x0 #define MX50_PAD_KEY_COL3__GPIO4_6 0x038 0x2e4 0x000 0x1 0x0 #define MX50_PAD_KEY_COL3__EIM_NANDF_READY0 0x038 0x2e4 0x7b4 0x2 0x0 #define MX50_PAD_KEY_COL3__SDMA_EXT_EVENT_0 0x038 0x2e4 0x7b8 0x6 0x0 diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index a9b712db9f6c..7fae2ffb76fe 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -209,24 +209,6 @@ status = "disabled"; }; - usbh2: usb@53f80400 { - compatible = "fsl,imx50-usb", "fsl,imx27-usb"; - reg = <0x53f80400 0x0200>; - interrupts = <16>; - clocks = <&clks IMX5_CLK_USBOH3_GATE>; - dr_mode = "host"; - status = "disabled"; - }; - - usbh3: usb@53f80600 { - compatible = "fsl,imx50-usb", "fsl,imx27-usb"; - reg = <0x53f80600 0x0200>; - interrupts = <17>; - clocks = <&clks IMX5_CLK_USBOH3_GATE>; - dr_mode = "host"; - status = "disabled"; - }; - gpio1: gpio@53f84000 { compatible = "fsl,imx50-gpio", "fsl,imx35-gpio"; reg = <0x53f84000 0x4000>; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index b8ca73d3d379..ba60b0cb3cc1 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -170,20 +170,15 @@ mux-ext-port = <3>; }; - usbphy { - #address-cells = <1>; - #size-cells = <0>; - compatible = "simple-bus"; - - usbh1phy: usbh1phy@0 { - compatible = "usb-nop-xceiv"; - reg = <0>; - clocks = <&clk_usb>; - clock-names = "main_clk"; - reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; - vcc-supply = <&vusb_reg>; - #phy-cells = <0>; - }; + usbphy1: usbphy1 { + compatible = "usb-nop-xceiv"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1reg>; + clocks = <&clk_usb>; + clock-names = "main_clk"; + reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; + vcc-supply = <&vusb_reg>; + #phy-cells = <0>; }; }; @@ -401,6 +396,10 @@ status = "okay"; }; +&pmu { + secure-reg-access; +}; + &ssi2 { status = "okay"; }; @@ -429,7 +428,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1>; vbus-supply = <®_hub_reset>; - fsl,usbphy = <&usbh1phy>; + fsl,usbphy = <&usbphy1>; phy_type = "ulpi"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts index b3d952f37cdc..e9e819f2b0b7 100644 --- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts +++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts @@ -83,19 +83,12 @@ fsl,mux-ext-port = <3>; }; - usbphy { - #address-cells = <1>; - #size-cells = <0>; - compatible = "simple-bus"; - - usbh1phy: usbh1phy@0 { - compatible = "usb-nop-xceiv"; - reg = <0>; - clocks = <&clks IMX5_CLK_USB_PHY_GATE>; - clock-names = "main_clk"; - clock-frequency = <19200000>; - #phy-cells = <0>; - }; + usbphy1: usbphy1 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX5_CLK_USB_PHY_GATE>; + clock-names = "main_clk"; + clock-frequency = <19200000>; + #phy-cells = <0>; }; }; @@ -275,7 +268,7 @@ &usbh1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1>; - fsl,usbphy = <&usbh1phy>; + fsl,usbphy = <&usbphy1>; dr_mode = "host"; phy_type = "ulpi"; status = "okay"; diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts index df9eca94d812..60b4d71c0dfe 100644 --- a/arch/arm/boot/dts/imx51-zii-rdu1.dts +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts @@ -476,6 +476,17 @@ status = "okay"; }; +&gpio1 { + unused-sd3-wp-gpio { + /* + * See pinctrl_esdhc1 below for more details on this + */ + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; + output-high; + }; +}; + &i2c2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; @@ -542,7 +553,7 @@ rmi4-f11@11 { reg = <0x11>; - touchscreen-inverted-y; + touchscreen-inverted-x; touchscreen-swapped-x-y; syna,sensor-type = <1>; }; @@ -554,6 +565,10 @@ remote-endpoint = <&display_in>; }; +&pmu { + secure-reg-access; +}; + &ssi2 { status = "okay"; }; @@ -578,10 +593,47 @@ rave-sp { compatible = "zii,rave-sp-rdu1"; current-speed = <38400>; + #address-cells = <1>; + #size-cells = <1>; watchdog { compatible = "zii,rave-sp-watchdog"; }; + + backlight { + compatible = "zii,rave-sp-backlight"; + }; + + pwrbutton { + compatible = "zii,rave-sp-pwrbutton"; + }; + + eeprom@a3 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa3 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "dds-eeprom"; + }; + + eeprom@a4 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa4 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "main-eeprom"; + }; + + eeprom@ae { + compatible = "zii,rave-sp-eeprom"; + reg = <0xae 0x200>; + zii,eeprom-name = "switch-eeprom"; + /* + * Not all RDU1s have this functionality, so we + * rely on the bootloader to enable this + */ + status = "disabled"; + }; }; }; @@ -620,6 +672,10 @@ status = "okay"; }; +&wdog1 { + status = "disabled"; +}; + &iomuxc { pinctrl_ampgpio: ampgpiogrp { fsl,pins = < @@ -660,6 +716,23 @@ MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 + /* + * GPIO1_1 is not directly used by eSDHC1 in + * any capacity, but earlier versions of RDU1 + * used that pin as WP GPIO for eSDHC3 and + * because of that that pad has an external + * pull-up resistor. This is problematic + * because out of reset the pad is configured + * as ALT0 which serves as SD1_WP, which, when + * pulled high by and external pull-up, will + * inhibit execution of any write request to + * attached eMMC device. + * + * To avoid this problem we configure the pad + * to ALT1/GPIO and avoid driving SD1_WP + * signal high. + */ + MX51_PAD_GPIO1_1__GPIO1_1 0x0000 >; }; diff --git a/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts b/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts new file mode 100644 index 000000000000..26cf08549df4 --- /dev/null +++ b/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts @@ -0,0 +1,448 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/* + * Copyright (C) 2018 Zodiac Inflight Innovations + */ + +/dts-v1/; + +#include "imx51.dtsi" + +/ { + model = "ZII SCU2 Mezz Board"; + compatible = "zii,imx51-scu2-mezz", "fsl,imx51"; + + chosen { + stdout-path = &uart1; + }; + + /* Will be filled by the bootloader */ + memory@90000000 { + reg = <0x90000000 0>; + }; + + aliases { + mdio-gpio0 = &mdio_gpio; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_mmc_reset>; + gpio = <&gpio3 13 GPIO_ACTIVE_LOW>; + startup-delay-us = <150000>; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + mdio_gpio: mdio-gpio { + compatible = "virtual,mdio-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_swmdio>; + gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>, /* mdc */ + <&gpio2 6 GPIO_ACTIVE_HIGH>; /* mdio */ + #address-cells = <1>; + #size-cells = <0>; + + switch@0 { + compatible = "marvell,mv88e6085"; + reg = <0>; + dsa,member = <0 0>; + eeprom-length = <512>; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "port4"; + }; + + port@1 { + reg = <1>; + label = "port5"; + }; + + port@2 { + reg = <2>; + label = "port6"; + }; + + port@3 { + reg = <3>; + label = "port7"; + }; + + port@4 { + reg = <4>; + label = "cpu"; + ethernet = <&fec>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + port@5 { + reg = <5>; + label = "mezz2esb"; + phy-mode = "sgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; +}; + +&cpu { + cpu-supply = <&sw1_reg>; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>, + <&gpio4 25 GPIO_ACTIVE_LOW>; + status = "okay"; + + pmic@0 { + compatible = "fsl,mc13892"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + spi-max-frequency = <6000000>; + spi-cs-high; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + fsl,mc13xxx-uses-adc; + + regulators { + sw1_reg: sw1 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1375000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + vpll_reg: vpll { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vdig_reg: vdig { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + }; + + vsd_reg: vsd { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + }; + + vusb_reg: vusb { + regulator-always-on; + }; + + vusb2_reg: vusb2 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <2775000>; + regulator-boot-on; + regulator-always-on; + }; + + vvideo_reg: vvideo { + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + }; + + vaudio_reg: vaudio { + regulator-min-microvolt = <2300000>; + regulator-max-microvolt = <3000000>; + }; + + vcam_reg: vcam { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3000000>; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + }; + }; + + leds { + #address-cells = <1>; + #size-cells = <0>; + led-control = <0x0 0x0 0x3f83f8 0x0>; + + sysled3: led3@3 { + reg = <3>; + label = "system:red:power"; + linux,default-trigger = "default-on"; + }; + + sysled4: led4@4 { + reg = <4>; + label = "system:green:act"; + linux,default-trigger = "heartbeat"; + }; + }; + }; + + flash@1 { + compatible = "atmel,at45", "atmel,dataflash"; + reg = <1>; + spi-max-frequency = <25000000>; + }; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <8>; + non-removable; + no-1-8-v; + no-sdio; + no-sd; + status = "okay"; +}; + +&esdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc4>; + bus-width = <4>; + no-1-8-v; + no-sdio; + cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "mii"; + status = "okay"; + phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; + phy-reset-duration = <1>; + phy-supply = <&vgen3_reg>; + phy-handle = <ðphy>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@0 { + reg = <0>; + max-speed = <100>; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c04"; + pagesize = <16>; + reg = <0x50>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; + + rave-sp { + compatible = "zii,rave-sp-mezz"; + current-speed = <57600>; + #address-cells = <1>; + #size-cells = <1>; + + watchdog { + compatible = "zii,rave-sp-watchdog-legacy"; + }; + + eeprom@a4 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa4 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "main-eeprom"; + }; + }; +}; + +&usbotg { + dr_mode = "host"; + disable-over-current; + phy_type = "utmi_wide"; + vbus-supply = <&usb_vbus>; + status = "okay"; +}; + +&usbphy0 { + vcc-supply = <&vusb2_reg>; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 + MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 + MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 + MX51_PAD_SD1_CLK__SD1_CLK 0x20d5 + MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5 + MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 + MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 + MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 + MX51_PAD_SD2_DATA0__SD1_DAT4 0x20d5 + MX51_PAD_SD2_DATA1__SD1_DAT5 0x20d5 + MX51_PAD_SD2_DATA2__SD1_DAT6 0x20d5 + MX51_PAD_SD2_DATA3__SD1_DAT7 0x20d5 + >; + }; + + pinctrl_esdhc4: esdhc4grp { + fsl,pins = < + MX51_PAD_NANDF_RB1__SD4_CMD 0x400020d5 + MX51_PAD_NANDF_CS2__SD4_CLK 0x20d5 + MX51_PAD_NANDF_CS3__SD4_DAT0 0x20d5 + MX51_PAD_NANDF_CS4__SD4_DAT1 0x20d5 + MX51_PAD_NANDF_CS5__SD4_DAT2 0x20d5 + MX51_PAD_NANDF_CS6__SD4_DAT3 0x20d5 + MX51_PAD_NANDF_D0__GPIO4_8 0x100 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x2004 + MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x2004 + MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x2004 + MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x2004 + MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x2004 + MX51_PAD_DISP2_DAT10__FEC_COL 0x0180 + MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x0180 + MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x20a4 + MX51_PAD_DISP2_DAT1__FEC_RX_ER 0x20a4 + MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x2180 + MX51_PAD_DI_GP3__FEC_TX_ER 0x2004 + MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x2180 + MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x0085 + MX51_PAD_DI_GP4__FEC_RDATA2 0x0085 + MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x0085 + MX51_PAD_DI2_PIN2__FEC_MDC 0x2004 + MX51_PAD_DI2_PIN3__FEC_MDIO 0x01f5 + MX51_PAD_DI2_PIN4__FEC_CRS 0x0180 + MX51_PAD_EIM_A20__GPIO2_14 0x0085 + MX51_PAD_EIM_A21__GPIO2_15 0x00e5 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed + MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX51_PAD_GPIO1_4__GPIO1_4 0x85 + MX51_PAD_GPIO1_8__GPIO1_8 0xe5 + >; + }; + + pinctrl_swmdio: swmdiogrp { + fsl,pins = < + MX51_PAD_EIM_D22__GPIO2_6 0x100 + MX51_PAD_EIM_D23__GPIO2_7 0x100 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 + MX51_PAD_UART1_TXD__UART1_TXD 0x1c5 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX51_PAD_UART3_RXD__UART3_RXD 0x1c5 + MX51_PAD_UART3_TXD__UART3_TXD 0x1c5 + >; + }; + + pinctrl_usb_mmc_reset: usbmmcgrp { + fsl,pins = < + MX51_PAD_CSI1_D9__GPIO3_13 0x85 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx51-zii-scu3-esb.dts b/arch/arm/boot/dts/imx51-zii-scu3-esb.dts new file mode 100644 index 000000000000..e6ebac8f43e4 --- /dev/null +++ b/arch/arm/boot/dts/imx51-zii-scu3-esb.dts @@ -0,0 +1,467 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/* + * Copyright (C) 2018 Zodiac Inflight Innovations + */ + +/dts-v1/; + +#include "imx51.dtsi" + +/ { + model = "ZII SCU3 ESB board"; + compatible = "zii,imx51-scu3-esb", "fsl,imx51"; + + chosen { + stdout-path = &uart1; + }; + + /* Will be filled by the bootloader */ + memory@90000000 { + reg = <0x90000000 0>; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_mmc_reset>; + gpio = <&gpio4 19 GPIO_ACTIVE_LOW>; + startup-delay-us = <150000>; + }; +}; + +&cpu { + cpu-supply = <&sw1_reg>; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>, + <&gpio4 25 GPIO_ACTIVE_LOW>; + status = "okay"; + + pmic@0 { + compatible = "fsl,mc13892"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + spi-max-frequency = <6000000>; + spi-cs-high; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + fsl,mc13xxx-uses-adc; + + regulators { + sw1_reg: sw1 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1375000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + vpll_reg: vpll { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vdig_reg: vdig { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + }; + + vsd_reg: vsd { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3150000>; + }; + + vusb_reg: vusb { + regulator-always-on; + }; + + vusb2_reg: vusb2 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <2775000>; + regulator-boot-on; + regulator-always-on; + }; + + vvideo_reg: vvideo { + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + }; + + vaudio_reg: vaudio { + regulator-min-microvolt = <2300000>; + regulator-max-microvolt = <3000000>; + }; + + vcam_reg: vcam { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3000000>; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + }; + }; + + leds { + #address-cells = <1>; + #size-cells = <0>; + led-control = <0x0 0x0 0x3f83f8 0x0>; + + sysled3: led3@3 { + reg = <3>; + label = "system:red:power"; + linux,default-trigger = "default-on"; + }; + + sysled4: led4@4 { + reg = <4>; + label = "system:green:act"; + linux,default-trigger = "heartbeat"; + }; + }; + }; + + flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <25000000>; + reg = <1>; + }; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <8>; + non-removable; + no-1-8-v; + no-sdio; + no-sd; + status = "okay"; +}; + +&esdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc4>; + bus-width = <4>; + no-1-8-v; + no-sdio; + cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "mii"; + status = "okay"; + + fixed-link { + speed = <100>; + full-duplex; + }; + + fec_mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + switch@0 { + compatible = "marvell,mv88e6085"; + reg = <0>; + dsa,member = <0 0>; + eeprom-length = <512>; + interrupt-parent = <&gpio4>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_switch>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "port1"; + }; + + port@1 { + reg = <1>; + label = "port2"; + }; + + port@2 { + reg = <2>; + label = "port3"; + }; + + port@3 { + reg = <3>; + label = "scu2scu"; + }; + + port@4 { + reg = <4>; + label = "esb2host"; + }; + + port@5 { + reg = <5>; + label = "esb2mezz"; + phy-mode = "sgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@6 { + reg = <6>; + label = "cpu"; + phy-mode = "mii"; + ethernet = <&fec>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + }; + }; + }; +}; + +&ipu { + status = "disabled"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c04"; + pagesize = <16>; + reg = <0x50>; + }; + + lm75@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; + + rave-sp { + compatible = "zii,rave-sp-esb"; + current-speed = <57600>; + #address-cells = <1>; + #size-cells = <1>; + + watchdog { + compatible = "zii,rave-sp-watchdog-legacy"; + }; + + eeprom@a4 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa4 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "main-eeprom"; + }; + }; +}; + +&usbotg { + dr_mode = "host"; + disable-over-current; + phy_type = "utmi_wide"; + vbus-supply = <&usb_vbus>; + status = "okay"; +}; + +&usbphy0 { + vcc-supply = <&vusb2_reg>; +}; + +&wdog1 { + status = "disabled"; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 + MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 + MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 + MX51_PAD_SD1_CLK__SD1_CLK 0x20d5 + MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5 + MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 + MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 + MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 + MX51_PAD_SD2_DATA0__SD1_DAT4 0x20d5 + MX51_PAD_SD2_DATA1__SD1_DAT5 0x20d5 + MX51_PAD_SD2_DATA2__SD1_DAT6 0x20d5 + MX51_PAD_SD2_DATA3__SD1_DAT7 0x20d5 + >; + }; + + pinctrl_esdhc4: esdhc4grp { + fsl,pins = < + MX51_PAD_NANDF_RB1__SD4_CMD 0x400020d5 + MX51_PAD_NANDF_CS2__SD4_CLK 0x20d5 + MX51_PAD_NANDF_CS3__SD4_DAT0 0x20d5 + MX51_PAD_NANDF_CS4__SD4_DAT1 0x20d5 + MX51_PAD_NANDF_CS5__SD4_DAT2 0x20d5 + MX51_PAD_NANDF_CS6__SD4_DAT3 0x20d5 + MX51_PAD_NANDF_D0__GPIO4_8 0x100 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x2004 + MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x2004 + MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x2004 + MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x2004 + MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x2004 + MX51_PAD_DISP2_DAT10__FEC_COL 0x0180 + MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x0180 + MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x20a4 + + MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x2180 + MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x2180 + MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x0085 + MX51_PAD_DI_GP4__FEC_RDATA2 0x0085 + MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x0085 + MX51_PAD_DI2_PIN2__FEC_MDC 0x2004 + MX51_PAD_DI2_PIN3__FEC_MDIO 0x01f5 + MX51_PAD_DI2_PIN4__FEC_CRS 0x0180 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed + MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX51_PAD_GPIO1_4__GPIO1_4 0x85 + MX51_PAD_GPIO1_8__GPIO1_8 0xe5 + >; + }; + + pinctrl_switch: switchgrp { + fsl,pins = < + MX51_PAD_AUD3_BB_CK__GPIO4_20 0xc5 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 + MX51_PAD_UART1_TXD__UART1_TXD 0x1c5 + MX51_PAD_UART1_RTS__UART1_RTS 0x1c5 + MX51_PAD_UART1_CTS__UART1_CTS 0x1c5 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX51_PAD_UART2_RXD__UART2_RXD 0x1c5 + MX51_PAD_UART2_TXD__UART2_TXD 0x1c5 + MX51_PAD_USBH1_DATA0__UART2_CTS 0x1c5 + MX51_PAD_USBH1_DATA3__UART2_RTS 0x1c5 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX51_PAD_UART3_RXD__UART3_RXD 0x1c5 + MX51_PAD_UART3_TXD__UART3_TXD 0x1c5 + >; + }; + + pinctrl_usb_mmc_reset: usbmmcgrp { + fsl,pins = < + MX51_PAD_AUD3_BB_RXD__GPIO4_19 0x100 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index fe01b890c715..5c4ba91e43ba 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -93,18 +93,17 @@ }; }; - usbphy { - #address-cells = <1>; - #size-cells = <0>; - compatible = "simple-bus"; + pmu: pmu { + compatible = "arm,cortex-a8-pmu"; + interrupt-parent = <&tzic>; + interrupts = <77>; + }; - usbphy0: usbphy@0 { - compatible = "usb-nop-xceiv"; - reg = <0>; - clocks = <&clks IMX5_CLK_USB_PHY_GATE>; - clock-names = "main_clk"; - #phy-cells = <0>; - }; + usbphy0: usbphy0 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX5_CLK_USB_PHY_GATE>; + clock-names = "main_clk"; + #phy-cells = <0>; }; display-subsystem { @@ -250,6 +249,11 @@ }; }; + aipstz1: bridge@73f00000 { + compatible = "fsl,imx51-aipstz"; + reg = <0x73f00000 0x60>; + }; + usbotg: usb@73f80000 { compatible = "fsl,imx51-usb", "fsl,imx27-usb"; reg = <0x73f80000 0x0200>; @@ -435,6 +439,11 @@ reg = <0x80000000 0x10000000>; ranges; + aipstz2: bridge@83f00000 { + compatible = "fsl,imx51-aipstz"; + reg = <0x83f00000 0x60>; + }; + iim: iim@83f98000 { compatible = "fsl,imx51-iim", "fsl,imx27-iim"; reg = <0x83f98000 0x4000>; @@ -442,6 +451,11 @@ clocks = <&clks IMX5_CLK_IIM_GATE>; }; + tigerp: tigerp@83fa0000 { + compatible = "fsl,imx51-tigerp"; + reg = <0x83fa0000 0x28>; + }; + owire: owire@83fa4000 { compatible = "fsl,imx51-owire", "fsl,imx21-owire"; reg = <0x83fa4000 0x4000>; @@ -528,6 +542,11 @@ status = "disabled"; }; + m4if: m4if@83fd8000 { + compatible = "fsl,imx51-m4if"; + reg = <0x83fd8000 0x1000>; + }; + weim: weim@83fda000 { #address-cells = <2>; #size-cells = <1>; @@ -588,6 +607,26 @@ clock-names = "ipg", "ahb", "ptp"; status = "disabled"; }; + + vpu@83ff4000 { + compatible = "fsl,imx51-vpu", "cnm,codahx4"; + reg = <0x83ff4000 0x1000>; + interrupts = <9>; + clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>, + <&clks IMX5_CLK_VPU_GATE>; + clock-names = "per", "ahb"; + resets = <&src 1>; + iram = <&iram>; + }; + + sahara: crypto@83ff8000 { + compatible = "fsl,imx53-sahara", "fsl,imx51-sahara"; + reg = <0x83ff8000 0x4000>; + interrupts = <19 20>; + clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>, + <&clks IMX5_CLK_SAHARA_IPG_GATE>; + clock-names = "ipg", "ahb"; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx53-kp-ddc.dts b/arch/arm/boot/dts/imx53-kp-ddc.dts new file mode 100644 index 000000000000..0e7f071fd10e --- /dev/null +++ b/arch/arm/boot/dts/imx53-kp-ddc.dts @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2018 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + */ + +/dts-v1/; +#include "imx53-kp.dtsi" + +/ { + model = "K+P imx53 DDC"; + compatible = "kiebackpeter,imx53-ddc", "fsl,imx53"; + + backlight_lcd: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 50000>; + power-supply = <®_backlight>; + brightness-levels = <0 24 28 32 36 + 40 44 48 52 56 + 60 64 68 72 76 + 80 84 88 92 96 100>; + default-brightness-level = <20>; + }; + + lcd_display: display { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp>; + + port@0 { + reg = <0>; + + display1_in: endpoint { + remote-endpoint = <&ipu_di1_disp1>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + lcd_panel: lcd-panel { + compatible = "koe,tx14d24vm1bpa"; + backlight = <&backlight_lcd>; + power-supply = <®_3v3>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + reg_backlight: regulator-backlight { + compatible = "regulator-fixed"; + regulator-name = "backlight-supply"; + regulator-min-microvolt = <15000000>; + regulator-max-microvolt = <15000000>; + regulator-always-on; + }; +}; + +&fec { + status = "okay"; +}; + +&i2c3 { + adc@48 { + compatible = "ti,ads1015"; + reg = <0x48>; + #address-cells = <1>; + #size-cells = <0>; + + channel@4 { + reg = <4>; + ti,gain = <2>; + ti,datarate = <4>; + }; + + channel@6 { + reg = <6>; + ti,gain = <2>; + ti,datarate = <4>; + }; + }; + + gpio-expander2@21 { + compatible = "nxp,pcf8574"; + reg = <0x21>; + interrupts = <109>; + #gpio-cells = <2>; + gpio-controller; + }; +}; + +&iomuxc { + imx53-kp-ddc { + pinctrl_disp: dispgrp { + fsl,pins = < + MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x4 + MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x4 + MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x4 + MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x4 + MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x4 + MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x4 + MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x4 + MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x4 + MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x4 + MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x4 + MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x4 + MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x4 + MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x4 + MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x4 + MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x4 + MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x4 + MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x4 + MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x4 + MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x4 + MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x4 + MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x4 + MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x4 + MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x4 + MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x4 + MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x4 + MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x4 + MX53_PAD_GPIO_1__PWM2_PWMO 0x4 + >; + }; + }; +}; + +&ipu_di1_disp1 { + remote-endpoint = <&display1_in>; +}; + +&pmic { + fsl,mc13xxx-uses-touch; +}; diff --git a/arch/arm/boot/dts/imx53-kp-hsc.dts b/arch/arm/boot/dts/imx53-kp-hsc.dts new file mode 100644 index 000000000000..6e3d71baac0f --- /dev/null +++ b/arch/arm/boot/dts/imx53-kp-hsc.dts @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2018 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + */ + +/dts-v1/; +#include "imx53-kp.dtsi" + +/ { + model = "K+P imx53 HSC"; + compatible = "kiebackpeter,imx53-hsc", "fsl,imx53"; +}; + +&fec { + status = "okay"; + + fixed-link { /* RMII fixed link to LAN9303 */ + speed = <100>; + full-duplex; + }; +}; + +&i2c3 { + switch: switch@a { + compatible = "smsc,lan9303-i2c"; + reg = <0xa>; + reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; + reset-duration = <400>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { /* RMII fixed link to master */ + reg = <0>; + label = "cpu"; + ethernet = <&fec>; + }; + + port@1 { /* external port 1 */ + reg = <1>; + label = "lan1"; + }; + + port@2 { /* external port 2 */ + reg = <2>; + label = "lan2"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx53-kp.dtsi b/arch/arm/boot/dts/imx53-kp.dtsi new file mode 100644 index 000000000000..8b25416a5303 --- /dev/null +++ b/arch/arm/boot/dts/imx53-kp.dtsi @@ -0,0 +1,189 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2018 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + */ + +/dts-v1/; +#include "imx53-tqma53.dtsi" +#include <dt-bindings/input/input.h> + +/ { + buzzer { + compatible = "pwm-beeper"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_buzzer>; + pwms = <&pwm1 0 500000>; + }; + + gpio-buttons { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiobuttons>; + + button-kalt { + label = "Kaltstart"; + linux,code = <KEY_F6>; + gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + }; + + button-pwr { + label = "PowerFailInterrupt"; + linux,code = <KEY_F7>; + gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-bus { + label = "bus"; + gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "gpio"; + default-state = "off"; + }; + + led-error { + label = "error"; + gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "gpio"; + default-state = "off"; + }; + + led-flash { + label = "flash"; + gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&can1 { + status = "okay"; +}; + +&can2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + + gpio-expander1@22 { + compatible = "nxp,pcf8574"; + reg = <0x22>; + interrupts = <109>; + #gpio-cells = <2>; + gpio-controller; + }; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_kp_common>; + + imx53-kp-common { + pinctrl_buzzer: buzzergrp { + fsl,pins = < + MX53_PAD_SD1_DATA3__PWM1_PWMO 0x1e4 + >; + }; + + pinctrl_gpiobuttons: gpiobuttonsgrp { + fsl,pins = < + MX53_PAD_EIM_RW__GPIO2_26 0x1e4 + MX53_PAD_EIM_D22__GPIO3_22 0x1e4 + >; + }; + + pinctrl_kp_common: kpcommongrp { + fsl,pins = < + MX53_PAD_EIM_CS0__GPIO2_23 0x1e4 + MX53_PAD_GPIO_19__GPIO4_5 0x1e4 + MX53_PAD_PATA_DATA6__GPIO2_6 0x1e4 + MX53_PAD_PATA_DATA7__GPIO2_7 0xe0 + MX53_PAD_CSI0_DAT14__GPIO6_0 0x1e4 + MX53_PAD_CSI0_DAT16__GPIO6_2 0x1e4 + MX53_PAD_CSI0_DAT18__GPIO6_4 0x1e4 + MX53_PAD_EIM_D17__GPIO3_17 0x1e4 + MX53_PAD_EIM_D18__GPIO3_18 0x1e4 + MX53_PAD_EIM_D21__GPIO3_21 0x1e4 + MX53_PAD_EIM_D29__GPIO3_29 0x1e4 + MX53_PAD_EIM_DA11__GPIO3_11 0x1e4 + MX53_PAD_EIM_DA13__GPIO3_13 0x1e4 + MX53_PAD_EIM_DA14__GPIO3_14 0x1e4 + MX53_PAD_SD1_DATA0__GPIO1_16 0x1e4 + MX53_PAD_SD1_CMD__GPIO1_18 0x1e4 + MX53_PAD_SD1_CLK__GPIO1_20 0x1e4 + >; + }; + + pinctrl_leds: ledgrp { + fsl,pins = < + MX53_PAD_EIM_EB2__GPIO2_30 0x1d4 + MX53_PAD_EIM_D28__GPIO3_28 0x1d4 + MX53_PAD_EIM_WAIT__GPIO5_0 0x1d4 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX53_PAD_CSI0_DAT12__UART4_TXD_MUX 0x1e4 + MX53_PAD_CSI0_DAT13__UART4_RXD_MUX 0x1e4 + >; + }; + }; +}; + +&pinctrl_uart1 { + fsl,pins = < + MX53_PAD_EIM_D23__GPIO3_23 0x1e4 + MX53_PAD_EIM_EB3__GPIO2_31 0x1e4 + MX53_PAD_EIM_D24__GPIO3_24 0x1e4 + MX53_PAD_EIM_D25__GPIO3_25 0x1e4 + MX53_PAD_EIM_D19__GPIO3_19 0x1e4 + MX53_PAD_EIM_D20__GPIO3_20 0x1e4 + >; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbphy0 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts index 3aa6f693fa9f..cdb90bee7b4a 100644 --- a/arch/arm/boot/dts/imx53-ppd.dts +++ b/arch/arm/boot/dts/imx53-ppd.dts @@ -140,6 +140,25 @@ regulator-always-on; }; + reg_3v3: regulator-3v3 { + /* TPS54320 */ + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_3v3_lcd: regulator-3v3-lcd { + /* MIC2009 */ + compatible = "regulator-fixed"; + regulator-name = "LCD_3V3"; + vin-supply = <®_3v3>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + pwm_bl: backlight { compatible = "pwm-backlight"; pwms = <&pwm2 0 50000>; @@ -154,6 +173,7 @@ 234 237 239 242 244 247 249 252 255>; default-brightness-level = <0>; enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; + power-supply = <®_3v3_lcd>; }; leds { @@ -198,8 +218,9 @@ }; }; - usbphy2: usbphy2 { + usbphy2: usbphy-2 { compatible = "usb-nop-xceiv"; + vcc-supply = <®_3v3>; reset-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>; clock-names = "main_clk"; clock-frequency = <24000000>; @@ -208,8 +229,9 @@ assigned-clock-parents = <&clks IMX5_CLK_OSC>; }; - usbphy3: usbphy3 { + usbphy3: usbphy-3 { compatible = "usb-nop-xceiv"; + vcc-supply = <®_3v3>; reset-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; clock-names = "main_clk"; @@ -221,6 +243,7 @@ panel-lvds0 { compatible = "nvd,9128"; + power-supply = <®_3v3_lcd>; port { panel_in_lvds0: endpoint { @@ -230,6 +253,14 @@ }; }; +&usbphy0 { + vcc-supply = <®_3v3>; +}; + +&usbphy1 { + vcc-supply = <®_3v3>; +}; + &audmux { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux>; @@ -414,6 +445,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; + phy-supply = <®_3v3>; phy-mode = "rmii"; phy-reset-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>; status = "okay"; @@ -562,6 +594,10 @@ }; }; +&pmu { + secure-reg-access; +}; + &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index ef7658a78836..7423d462d1e4 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -153,7 +153,6 @@ imx53-qsb { pinctrl_hog: hoggrp { fsl,pins = < - MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 MX53_PAD_GPIO_8__GPIO1_8 0x80000000 MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000 MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000 @@ -180,6 +179,12 @@ >; }; + pinctrl_codec: codecgrp { + fsl,pins = < + MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4 + >; + }; + pinctrl_esdhc1: esdhc1grp { fsl,pins = < MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 @@ -310,6 +315,8 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_codec>; #sound-dai-cells = <0>; VDDA-supply = <®_3p2v>; VDDIO-supply = <®_3p2v>; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 1a7a7bb3df45..6386185ae234 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -113,7 +113,7 @@ }; }; - pmu { + pmu: pmu { compatible = "arm,cortex-a8-pmu"; interrupt-parent = <&tzic>; interrupts = <77>; @@ -672,6 +672,11 @@ status = "disabled"; }; + tigerp: tigerp@63fa0000 { + compatible = "fsl,imx53-tigerp", "fsl,imx51-tigerp"; + reg = <0x63fa0000 0x28>; + }; + owire: owire@63fa4000 { compatible = "fsl,imx53-owire", "fsl,imx21-owire"; reg = <0x63fa4000 0x4000>; diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts index 3dee3af1a4c1..9de45a717356 100644 --- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts @@ -221,9 +221,6 @@ /* Colibri MMC */ &usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_mmc_cd>; - cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */ status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6dl-icore-mipi.dts b/arch/arm/boot/dts/imx6dl-icore-mipi.dts new file mode 100644 index 000000000000..bf53f0552aa1 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-icore-mipi.dts @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 Engicam S.r.l. + * Copyright (C) 2018 Amarula Solutions B.V. + * Author: Jagan Teki <jagan@amarulasolutions.com> + */ + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-icore.dtsi" + +/ { + model = "Engicam i.CoreM6 DualLite/Solo MIPI Starter Kit"; + compatible = "engicam,imx6-icore", "fsl,imx6dl"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&usdhc3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-mamoj.dts b/arch/arm/boot/dts/imx6dl-mamoj.dts index 6b2d29138bed..df8607fe4142 100644 --- a/arch/arm/boot/dts/imx6dl-mamoj.dts +++ b/arch/arm/boot/dts/imx6dl-mamoj.dts @@ -6,11 +6,156 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "imx6dl.dtsi" / { model = "BTicino i.MX6DL Mamoj board"; compatible = "bticino,imx6dl-mamoj", "fsl,imx6dl"; + + backlight_lcd: backlight-lcd { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 25000>; /* 25000ns -> 40kHz */ + brightness-levels = <0 4 8 16 32 64 128 160 192 224 255>; + default-brightness-level = <7>; + }; + + display: disp0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_lcdif>; + status = "okay"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel-lcd { + compatible = "rocktech,rk070er9427"; + backlight = <&backlight_lcd>; + power-supply = <®_lcd_lr>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_lcdif_pwr>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + reg_lcd_3v3: regulator-lcd-dvdd { + compatible = "regulator-fixed"; + regulator-name = "lcd-dvdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 1 0>; + enable-active-high; + startup-delay-us = <21000>; + }; + + reg_lcd_power: regulator-lcd-power { + compatible = "regulator-fixed"; + regulator-name = "lcd-enable"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 6 0>; + enable-active-high; + vin-supply = <®_lcd_3v3>; + }; + + reg_lcd_vgl: regulator-lcd-vgl { + compatible = "regulator-fixed"; + regulator-name = "lcd-vgl"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; + startup-delay-us = <6000>; + enable-active-high; + vin-supply = <®_lcd_power>; + }; + + reg_lcd_vgh: regulator-lcd-vgh { + compatible = "regulator-fixed"; + regulator-name = "lcd-vgh"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; + startup-delay-us = <6000>; + enable-active-high; + vin-supply = <®_lcd_avdd>; + }; + + reg_lcd_vcom: regulator-lcd-vcom { + compatible = "regulator-fixed"; + regulator-name = "lcd-vcom"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 14 GPIO_ACTIVE_HIGH>; + startup-delay-us = <11000>; + enable-active-high; + vin-supply = <®_lcd_vgh>; + }; + + reg_lcd_lr: regulator-lcd-lr { + compatible = "regulator-fixed"; + regulator-name = "lcd-lr"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_lcd_vcom>; + }; + + reg_lcd_avdd: regulator-lcd-avdd { + compatible = "regulator-fixed"; + regulator-name = "lcd-avdd"; + regulator-min-microvolt = <10280000>; + regulator-max-microvolt = <10280000>; + gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; + startup-delay-us = <6000>; + enable-active-high; + vin-supply = <®_lcd_vgl>; + }; + + reg_usb_host: regulator-usb-vbus { + compatible = "regulator-fixed"; + regulator-name = "usbhost-vbus"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbhost>; + regulator-min-microvolt = <50000000>; + regulator-max-microvolt = <50000000>; + gpio = <&gpio6 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_wl18xx_vmmc: regulator-wl18xx-vmcc { + compatible = "regulator-fixed"; + regulator-name = "vwl1807"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlan>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio6 21 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; }; &fec { @@ -147,12 +292,56 @@ }; }; +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; status = "okay"; }; +&usbh1 { + vbus-supply = <®_usb_host>; + status = "okay"; +}; + +&usbotg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <4>; + vmmc-supply = <®_wl18xx_vmmc>; + no-1-8-v; + non-removable; + wakeup-source; + keep-power-in-suspend; + cap-power-off-card; + max-frequency = <25000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; + interrupt-parent = <&gpio6>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; + tcxo-clock-frequency = <26000000>; + }; +}; + &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; @@ -200,6 +389,59 @@ >; }; + pinctrl_ipu1_lcdif: pinctrlipu1lcdif { /* parallel port 24-bit */ + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 /* VDOUT_PCLK */ + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 /* VDOUT_HSYNC */ + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 /* VDOUT_VSYNC */ + MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04 0x10 /* VDOUT_RESET */ + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_ipu1_lcdif_pwr: ipu1lcdifpwrgrp { + fsl,pins = < + MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x40013058 /* EN_LCD33V */ + MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x4001b0b0 /* EN_AVDD */ + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x40013058 /* ENVGH */ + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x40013058 /* ENVGL */ + MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x40013058 /* LCD_POWER */ + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x40013058 /* EN_VCOM_LCD */ + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x40013058 /* LCD_L_R */ + MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x40013058 /* LCD_U_D */ + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + pinctrl_uart3: uart3grp { fsl,pins = < MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 @@ -207,6 +449,23 @@ >; }; + pinctrl_usbhost: usbhostgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x4001b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17069 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10079 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17069 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17069 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17069 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17069 + >; + }; + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 @@ -221,4 +480,10 @@ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 >; }; + + pinctrl_wlan: wlangrp { + fsl,pins = < + MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x4001b0b0 + >; + }; }; diff --git a/arch/arm/boot/dts/imx6dl-nit6xlite.dts b/arch/arm/boot/dts/imx6dl-nit6xlite.dts index 30ce2c0cec2b..61fa30991d67 100644 --- a/arch/arm/boot/dts/imx6dl-nit6xlite.dts +++ b/arch/arm/boot/dts/imx6dl-nit6xlite.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2015 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts index ec53d7a09572..ef58d3b0ea0d 100644 --- a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts +++ b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2013 Boundary Devices, Inc. * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index 2e98c92adff7..dd3226fe5ecd 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -19,36 +19,8 @@ reg = <0x10000000 0x40000000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_2p5v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "2P5V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - }; - - reg_3p3v: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - reg_usb_otg_vbus: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; - enable-active-high; - }; + chosen { + stdout-path = "serial1:115200n8"; }; leds { @@ -82,6 +54,28 @@ mux-int-port = <1>; mux-ext-port = <3>; }; + + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_usb_otg_vbus: regulator-usbotgvbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_LOW>; + }; }; &audmux { diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index b384913c34dd..f0607eb41df4 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -33,6 +33,7 @@ 396000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; clocks = <&clks IMX6QDL_CLK_ARM>, <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, <&clks IMX6QDL_CLK_STEP>, @@ -50,6 +51,29 @@ device_type = "cpu"; reg = <1>; next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 996000 1250000 + 792000 1175000 + 396000 1150000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 996000 1175000 + 792000 1175000 + 396000 1175000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clks IMX6QDL_CLK_ARM>, + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, + <&clks IMX6QDL_CLK_STEP>, + <&clks IMX6QDL_CLK_PLL1_SW>, + <&clks IMX6QDL_CLK_PLL1_SYS>; + clock-names = "arm", "pll2_pfd2_396m", "step", + "pll1_sw", "pll1_sys"; + arm-supply = <®_arm>; + pu-supply = <®_pu>; + soc-supply = <®_soc>; }; }; diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts index aa0e631f3c0a..707ac9a46115 100644 --- a/arch/arm/boot/dts/imx6q-apalis-eval.dts +++ b/arch/arm/boot/dts/imx6q-apalis-eval.dts @@ -62,6 +62,10 @@ rtc1 = &snvs_rtc; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -109,6 +113,7 @@ */ compatible = "edt,et057090dhu"; backlight = <&backlight>; + power-supply = <®_3v3_sw>; port { lcd_panel_in: endpoint { @@ -127,19 +132,30 @@ enable-active-high; status = "okay"; }; + + reg_3v3_sw: regulator-3v3-sw { + compatible = "regulator-fixed"; + regulator-name = "3.3V_SW"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; }; &backlight { brightness-levels = <0 127 191 223 239 247 251 255>; default-brightness-level = <1>; + power-supply = <®_3v3_sw>; status = "okay"; }; &can1 { + xceiver-supply = <®_3v3_sw>; status = "okay"; }; &can2 { + xceiver-supply = <®_3v3_sw>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts index e8dccf552122..4e1c8feaef82 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts @@ -63,6 +63,10 @@ rtc1 = &snvs_rtc; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts index 6831dfd24cc1..469e3d0e2827 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts @@ -62,6 +62,10 @@ rtc1 = &snvs_rtc; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts index 65ef4cacbc71..18ae4f3be6e3 100644 --- a/arch/arm/boot/dts/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts @@ -187,6 +187,72 @@ >; }; +&cpu1 { + /* + * Although the imx6q fuse indicates that 1.2GHz operation is possible, + * the module behaves unstable at this frequency. Hence, remove the + * 1.2GHz operation point here. + */ + operating-points = < + /* kHz uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 1175000 + >; +}; + +&cpu2 { + /* + * Although the imx6q fuse indicates that 1.2GHz operation is possible, + * the module behaves unstable at this frequency. Hence, remove the + * 1.2GHz operation point here. + */ + operating-points = < + /* kHz uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 1175000 + >; +}; + +&cpu3 { + /* + * Although the imx6q fuse indicates that 1.2GHz operation is possible, + * the module behaves unstable at this frequency. Hence, remove the + * 1.2GHz operation point here. + */ + operating-points = < + /* kHz uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 1175000 + >; +}; + &ecspi1 { cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio3 19 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6q-icore-mipi.dts b/arch/arm/boot/dts/imx6q-icore-mipi.dts index acd3d33476d4..95b2efda17b4 100644 --- a/arch/arm/boot/dts/imx6q-icore-mipi.dts +++ b/arch/arm/boot/dts/imx6q-icore-mipi.dts @@ -20,6 +20,14 @@ status = "okay"; }; +&mipi_csi { + status = "okay"; +}; + +&ov5640 { + status = "okay"; +}; + &usdhc3 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts index 2a3c44f98eed..03bec0c53063 100644 --- a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts +++ b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2015 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts b/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts index c5d59baa1a07..eb4eecb6ed22 100644 --- a/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts +++ b/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2016 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-nitrogen6x.dts b/arch/arm/boot/dts/imx6q-nitrogen6x.dts index df8ff397a914..435445a34ad0 100644 --- a/arch/arm/boot/dts/imx6q-nitrogen6x.dts +++ b/arch/arm/boot/dts/imx6q-nitrogen6x.dts @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2013 Boundary Devices, Inc. * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts index f2368a073d07..c54362fcc508 100644 --- a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts +++ b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts @@ -177,6 +177,7 @@ touchscreen-size-y = <480>; touchscreen-inverted-x; touchscreen-inverted-y; + wakeup-source; }; rtc@68 { diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 70483ce72ba6..0193ee6fe964 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -38,6 +38,7 @@ 396000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; clocks = <&clks IMX6QDL_CLK_ARM>, <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, <&clks IMX6QDL_CLK_STEP>, @@ -50,25 +51,106 @@ soc-supply = <®_soc>; }; - cpu@1 { + cpu1: cpu@1 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <1>; next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 1200000 1275000 + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 1200000 1275000 + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 1175000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clks IMX6QDL_CLK_ARM>, + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, + <&clks IMX6QDL_CLK_STEP>, + <&clks IMX6QDL_CLK_PLL1_SW>, + <&clks IMX6QDL_CLK_PLL1_SYS>; + clock-names = "arm", "pll2_pfd2_396m", "step", + "pll1_sw", "pll1_sys"; + arm-supply = <®_arm>; + pu-supply = <®_pu>; + soc-supply = <®_soc>; }; - cpu@2 { + cpu2: cpu@2 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <2>; next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 1200000 1275000 + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 1200000 1275000 + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 1175000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clks IMX6QDL_CLK_ARM>, + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, + <&clks IMX6QDL_CLK_STEP>, + <&clks IMX6QDL_CLK_PLL1_SW>, + <&clks IMX6QDL_CLK_PLL1_SYS>; + clock-names = "arm", "pll2_pfd2_396m", "step", + "pll1_sw", "pll1_sys"; + arm-supply = <®_arm>; + pu-supply = <®_pu>; + soc-supply = <®_soc>; }; - cpu@3 { + cpu3: cpu@3 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <3>; next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 1200000 1275000 + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 1200000 1275000 + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 1175000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clks IMX6QDL_CLK_ARM>, + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, + <&clks IMX6QDL_CLK_STEP>, + <&clks IMX6QDL_CLK_PLL1_SW>, + <&clks IMX6QDL_CLK_PLL1_SYS>; + clock-names = "arm", "pll2_pfd2_396m", "step", + "pll1_sw", "pll1_sys"; + arm-supply = <®_arm>; + pu-supply = <®_pu>; + soc-supply = <®_soc>; }; }; @@ -90,7 +172,7 @@ clocks = <&clks IMX6Q_CLK_ECSPI5>, <&clks IMX6Q_CLK_ECSPI5>; clock-names = "ipg", "per"; - dmas = <&sdma 11 7 1>, <&sdma 12 7 2>; + dmas = <&sdma 11 8 1>, <&sdma 12 8 2>; dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index 64fbee61de44..05f07ea3e8c8 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -61,25 +61,17 @@ status = "disabled"; }; - reg_1p8v: regulator-1p8v { + reg_module_3v3: regulator-module-3v3 { compatible = "regulator-fixed"; - regulator-name = "1P8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - reg_2p5v: regulator-2p5v { - compatible = "regulator-fixed"; - regulator-name = "2P5V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; + regulator-name = "+V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; - reg_3p3v: regulator-3p3v { + reg_module_3v3_audio: regulator-module-3v3-audio { compatible = "regulator-fixed"; - regulator-name = "3P3V"; + regulator-name = "+V3.3_AUDIO"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; @@ -297,7 +289,7 @@ vgen4_reg: vgen4 { regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; + regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; @@ -322,8 +314,9 @@ compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; - VDDA-supply = <®_2p5v>; - VDDIO-supply = <®_3p3v>; + VDDA-supply = <®_module_3v3_audio>; + VDDIO-supply = <®_module_3v3>; + VDDD-supply = <&vgen4_reg>; }; /* STMPE811 touch screen controller */ @@ -455,9 +448,10 @@ &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit>; - vqmmc-supply = <®_3p3v>; + vqmmc-supply = <®_module_3v3>; bus-width = <8>; - voltage-ranges = <3300 3300>; + disable-wp; + no-1-8-v; status = "disabled"; }; @@ -465,9 +459,10 @@ &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; - vqmmc-supply = <®_3p3v>; + vqmmc-supply = <®_module_3v3>; bus-width = <4>; - voltage-ranges = <3300 3300>; + disable-wp; + no-1-8-v; status = "disabled"; }; @@ -475,9 +470,9 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - vqmmc-supply = <®_3p3v>; + vqmmc-supply = <®_module_3v3>; bus-width = <8>; - voltage-ranges = <3300 3300>; + no-1-8-v; non-removable; status = "okay"; }; @@ -952,38 +947,4 @@ MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059 >; }; - - pinctrl_usdhc3_100mhz: usdhc3100mhzgrp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 - MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9 - MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9 - MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9 - MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9 - /* eMMC reset */ - MX6QDL_PAD_SD3_RST__SD3_RESET 0x170b9 - >; - }; - - pinctrl_usdhc3_200mhz: usdhc3200mhzgrp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 - MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9 - MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9 - MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9 - MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9 - /* eMMC reset */ - MX6QDL_PAD_SD3_RST__SD3_RESET 0x170f9 - >; - }; }; diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index 76035db96f67..87e15e7cb32b 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -56,25 +56,17 @@ status = "disabled"; }; - reg_1p8v: regulator-1p8v { + reg_module_3v3: regulator-module-3v3 { compatible = "regulator-fixed"; - regulator-name = "1P8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - reg_2p5v: regulator-2p5v { - compatible = "regulator-fixed"; - regulator-name = "2P5V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; + regulator-name = "+V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; - reg_3p3v: regulator-3p3v { + reg_module_3v3_audio: regulator-module-3v3-audio { compatible = "regulator-fixed"; - regulator-name = "3P3V"; + regulator-name = "+V3.3_AUDIO"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; @@ -227,7 +219,7 @@ vgen4_reg: vgen4 { regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; + regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; @@ -252,8 +244,9 @@ compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; - VDDA-supply = <®_2p5v>; - VDDIO-supply = <®_3p3v>; + VDDA-supply = <®_module_3v3_audio>; + VDDIO-supply = <®_module_3v3>; + VDDD-supply = <&vgen4_reg>; lrclk-strength = <3>; }; @@ -385,10 +378,12 @@ /* Colibri MMC */ &usdhc1 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; - vqmmc-supply = <®_3p3v>; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>; + cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */ + disable-wp; + vqmmc-supply = <®_module_3v3>; bus-width = <4>; - voltage-ranges = <3300 3300>; + no-1-8-v; status = "disabled"; }; @@ -396,9 +391,9 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - vqmmc-supply = <®_3p3v>; + vqmmc-supply = <®_module_3v3>; bus-width = <8>; - voltage-ranges = <3300 3300>; + no-1-8-v; non-removable; status = "okay"; }; @@ -479,8 +474,7 @@ pinctrl_gpio_keys: gpiokeys { fsl,pins = < - /* Power button */ - MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b0 + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0 >; }; @@ -567,7 +561,7 @@ pinctrl_mmc_cd: gpiommccd { fsl,pins = < - MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x80000000 + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x1b0b1 >; }; @@ -698,40 +692,6 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3100mhzgrp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 - MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9 - MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9 - MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9 - MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9 - /* eMMC reset */ - MX6QDL_PAD_SD3_RST__SD3_RESET 0x170b9 - >; - }; - - pinctrl_usdhc3_200mhz: usdhc3200mhzgrp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 - MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9 - MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9 - MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9 - MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9 - /* eMMC reset */ - MX6QDL_PAD_SD3_RST__SD3_RESET 0x170f9 - >; - }; - pinctrl_weim_cs0: weimcs0grp { fsl,pins = < /* nEXT_CS0 */ diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi index 0a1574998fc6..9ce993776160 100644 --- a/arch/arm/boot/dts/imx6qdl-icore.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi @@ -65,8 +65,7 @@ regulator-always-on; }; - - reg_2p5v: regulator-3p3v { + reg_2p5v: regulator-2p5v { compatible = "regulator-fixed"; regulator-name = "2P5V"; regulator-min-microvolt = <2500000>; @@ -215,6 +214,29 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; + ov5640: camera@3c { + compatible = "ovti,ov5640"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5640>; + reg = <0x3c>; + clocks = <&clks IMX6QDL_CLK_CKO>; + clock-names = "xclk"; + DOVDD-supply = <®_1p8v>; + AVDD-supply = <®_3p3v>; + DVDD-supply = <®_3p3v>; + powerdown-gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>; + status = "disabled"; + + port { + ov5640_to_mipi_csi2: endpoint { + remote-endpoint = <&mipi_csi2_in>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + sgtl5000: codec@a { #sound-dai-cells = <0>; compatible = "fsl,sgtl5000"; @@ -226,6 +248,20 @@ }; }; +&mipi_csi { + status = "disabled"; + + port@0 { + reg = <0>; + + mipi_csi2_in: endpoint { + remote-endpoint = <&ov5640_to_mipi_csi2>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; +}; + &pwm3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; @@ -353,7 +389,14 @@ fsl,pins = < MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + >; + }; + + pinctrl_ov5640: ov5640grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x1b0b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi index aab088f318e8..29baf25ae5d0 100644 --- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2015 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -292,6 +256,7 @@ reg = <0x38>; interrupt-parent = <&gpio1>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; }; rtc@6f { diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index 87ca6ead4098..39200e5dc896 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2015 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -442,6 +406,7 @@ reg = <0x38>; interrupt-parent = <&gpio1>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi index f5b763d39285..572abd7499b1 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2016 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -360,6 +324,7 @@ reg = <0x38>; interrupt-parent = <&gpio1>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 596866b0a0d2..98384a6c5d12 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2013 Boundary Devices, Inc. * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -370,6 +334,7 @@ reg = <0x38>; interrupt-parent = <&gpio1>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 0e28e36ddbb2..9f11f1fcc3e6 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -6,6 +6,10 @@ #include <dt-bindings/gpio/gpio.h> / { + chosen { + stdout-path = &uart4; + }; + memory@10000000 { reg = <0x10000000 0x80000000>; }; @@ -155,6 +159,27 @@ gpio-controller; #gpio-cells = <2>; }; + + light-sensor@44 { + compatible = "isil,isl29023"; + reg = <0x44>; + interrupt-parent = <&gpio5>; + interrupts = <17 IRQ_TYPE_EDGE_FALLING>; + }; + + magnetometer@e { + compatible = "fsl,mag3110"; + reg = <0x0e>; + interrupt-parent = <&gpio2>; + interrupts = <29 IRQ_TYPE_EDGE_RISING>; + }; + + accelerometer@1c { + compatible = "fsl,mma8451"; + reg = <0x1c>; + interrupt-parent = <&gpio6>; + interrupts = <31 IRQ_TYPE_LEVEL_LOW>; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 15744ad52535..6e46a195b399 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -341,6 +341,7 @@ sw4_reg: sw4 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; swbst_reg: swbst { diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index e1afa54404d0..381bf61fcd28 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -8,30 +8,6 @@ #include <dt-bindings/gpio/gpio.h> / { - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_2p5v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "2P5V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; - }; - - reg_3p3v: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - }; - sound { compatible = "fsl,imx6-wandboard-sgtl5000", "fsl,imx-audio-sgtl5000"; @@ -52,6 +28,32 @@ spdif-controller = <&spdif>; spdif-out; }; + + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator-usbotgvbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotgvbus>; + gpio = <&gpio3 22 GPIO_ACTIVE_LOW>; + }; }; &audmux { @@ -174,6 +176,12 @@ >; }; + pinctrl_usbotgvbus: usbotgvbusgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x130b0 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 @@ -248,10 +256,11 @@ }; &usbotg { + vbus-supply = <®_usb_otg_vbus>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; disable-over-current; - dr_mode = "peripheral"; + dr_mode = "otg"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 19a075aee19e..87c60a853f8b 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -320,10 +320,36 @@ rave-sp { compatible = "zii,rave-sp-rdu2"; current-speed = <1000000>; + #address-cells = <1>; + #size-cells = <1>; watchdog { compatible = "zii,rave-sp-watchdog"; }; + + backlight { + compatible = "zii,rave-sp-backlight"; + }; + + pwrbutton { + compatible = "zii,rave-sp-pwrbutton"; + }; + + eeprom@a3 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa3 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "dds-eeprom"; + }; + + eeprom@a4 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa4 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "main-eeprom"; + }; }; }; @@ -569,14 +595,14 @@ rmi4-f11@11 { reg = <0x11>; - touchscreen-inverted-y; + touchscreen-inverted-x; touchscreen-swapped-x-y; syna,sensor-type = <1>; }; rmi4-f12@12 { reg = <0x12>; - touchscreen-inverted-y; + touchscreen-inverted-x; touchscreen-swapped-x-y; syna,sensor-type = <1>; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 911141e24681..61d2d26afbf4 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -922,7 +922,6 @@ crypto: caam@2100000 { compatible = "fsl,sec-v4.0"; - fsl,sec-era = <4>; #address-cells = <1>; #size-cells = <1>; reg = <0x2100000 0x10000>; diff --git a/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts b/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts index a39b86036581..741d1ed338ca 100644 --- a/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts +++ b/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2016 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts b/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts index 011726c836cd..1593ac86b2a4 100644 --- a/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts +++ b/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2017 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 92ad01f676e3..679b4482ab13 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -12,6 +12,10 @@ model = "Freescale i.MX6 SoloLite EVK Board"; compatible = "fsl,imx6sl-evk", "fsl,imx6sl"; + chosen { + stdout-path = &uart1; + }; + memory@80000000 { reg = <0x80000000 0x40000000>; }; @@ -73,6 +77,8 @@ reg_lcd_3v3: regulator-lcd-3v3 { compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_lcd_3v3>; regulator-name = "lcd-3v3"; gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>; enable-active-high; @@ -195,6 +201,7 @@ sw4_reg: sw4 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; swbst_reg: swbst { @@ -406,6 +413,12 @@ >; }; + pinctrl_reg_lcd_3v3: reglcd3v3grp { + fsl,pins = < + MX6SL_PAD_KEY_ROW5__GPIO4_IO03 0x17059 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 994e48dc1df0..7a4f5dace902 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -60,6 +60,7 @@ 396000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>, <&clks IMX6SL_CLK_STEP>, <&clks IMX6SL_CLK_PLL1_SW>, <&clks IMX6SL_CLK_PLL1_SYS>; @@ -523,8 +524,8 @@ regulator-1p1 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1375000>; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; regulator-always-on; anatop-reg-offset = <0x110>; anatop-vol-bit-shift = <8>; @@ -553,8 +554,8 @@ regulator-2p5 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; - regulator-min-microvolt = <2100000>; - regulator-max-microvolt = <2850000>; + regulator-min-microvolt = <2250000>; + regulator-max-microvolt = <2750000>; regulator-always-on; anatop-reg-offset = <0x130>; anatop-vol-bit-shift = <8>; @@ -680,10 +681,36 @@ #interrupt-cells = <3>; interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&intc>; - pu-supply = <®_pu>; - clocks = <&clks IMX6SL_CLK_GPU2D_OVG>, - <&clks IMX6SL_CLK_GPU2D_PODF>; - #power-domain-cells = <1>; + clocks = <&clks IMX6SL_CLK_IPG>; + clock-names = "ipg"; + + pgc { + #address-cells = <1>; + #size-cells = <0>; + + power-domain@0 { + reg = <0>; + #power-domain-cells = <0>; + }; + + pd_pu: power-domain@1 { + reg = <1>; + #power-domain-cells = <0>; + power-supply = <®_pu>; + clocks = <&clks IMX6SL_CLK_GPU2D_OVG>, + <&clks IMX6SL_CLK_GPU2D_PODF>; + }; + + pd_disp: power-domain@2 { + reg = <2>; + #power-domain-cells = <0>; + clocks = <&clks IMX6SL_CLK_LCDIF_AXI>, + <&clks IMX6SL_CLK_LCDIF_PIX>, + <&clks IMX6SL_CLK_EPDC_AXI>, + <&clks IMX6SL_CLK_EPDC_PIX>, + <&clks IMX6SL_CLK_PXP_AXI>; + }; + }; }; gpr: iomuxc-gpr@20e0000 { @@ -738,6 +765,7 @@ <&clks IMX6SL_CLK_DUMMY>; clock-names = "pix", "axi", "disp_axi"; status = "disabled"; + power-domains = <&pd_disp>; }; dcp: dcp@20fc000 { @@ -921,5 +949,25 @@ status = "disabled"; }; }; + + gpu_2d: gpu@2200000 { + compatible = "vivante,gc"; + reg = <0x02200000 0x4000>; + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_MMDC_ROOT>, + <&clks IMX6SL_CLK_GPU2D_OVG>; + clock-names = "bus", "core"; + power-domains = <&pd_pu>; + }; + + gpu_vg: gpu@2204000 { + compatible = "vivante,gc"; + reg = <0x02204000 0x4000>; + interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_MMDC_ROOT>, + <&clks IMX6SL_CLK_GPU2D_OVG>; + clock-names = "bus", "core"; + power-domains = <&pd_pu>; + }; }; }; diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts new file mode 100644 index 000000000000..c8e115564ba2 --- /dev/null +++ b/arch/arm/boot/dts/imx6sll-evk.dts @@ -0,0 +1,463 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP. + * + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "imx6sll.dtsi" + +/ { + model = "Freescale i.MX6SLL EVK Board"; + compatible = "fsl,imx6sll-evk", "fsl,imx6sll"; + + chosen { + stdout-path = &uart1; + }; + + memory@80000000 { + reg = <0x80000000 0x80000000>; + }; + + backlight_display: backlight-display { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + + reg_usb_otg1_vbus: regulator-otg1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_vbus>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg2_vbus: regulator-otg2-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg2_vbus>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_aud3v: regulator-aud3v { + compatible = "regulator-fixed"; + regulator-name = "wm8962-supply-3v15"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + regulator-boot-on; + }; + + reg_aud4v: regulator-aud4v { + compatible = "regulator-fixed"; + regulator-name = "wm8962-supply-4v2"; + regulator-min-microvolt = <4325000>; + regulator-max-microvolt = <4325000>; + regulator-boot-on; + }; + + reg_lcd_3v3: regulator-lcd-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_lcd_3v3>; + regulator-name = "lcd-3v3"; + gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_lcd_5v: regulator-lcd-5v { + compatible = "regulator-fixed"; + regulator-name = "lcd-5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_sd1_vmmc: regulator-sd1-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_sd1_vmmc>; + regulator-name = "SD1_SPWR"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_sd3_vmmc: regulator-sd3-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_sd3_vmmc>; + regulator-name = "SD3_WIFI"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + panel { + compatible = "sii,43wvf1g"; + backlight = <&backlight_display>; + dvdd-supply = <®_lcd_3v3>; + avdd-supply = <®_lcd_5v>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; +}; + +&cpu0 { + arm-supply = <&sw1a_reg>; + soc-supply = <&sw1c_reg>; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pfuze100: pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd>; + status = "okay"; + + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_sd1_vmmc>; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + disable-over-current; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; + keep-power-in-suspend; + enable-sdio-wakeup; + vmmc-supply = <®_sd3_vmmc>; + status = "okay"; +}; + +&iomuxc { + pinctrl_reg_sd3_vmmc: sd3vmmcgrp { + fsl,pins = < + MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x17059 + >; + }; + + pinctrl_usb_otg1_vbus: vbus1grp { + fsl,pins = < + MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059 + >; + }; + + pinctrl_usb_otg2_vbus: vbus2grp { + fsl,pins = < + MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059 + >; + }; + + pinctrl_reg_lcd_3v3: reglcd3v3grp { + fsl,pins = < + MX6SLL_PAD_KEY_ROW5__GPIO4_IO03 0x17059 + >; + }; + + pinctrl_reg_sd1_vmmc: sd1vmmcgrp { + fsl,pins = < + MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x17059 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1 + MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x13059 + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x17059 + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x17059 + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x17059 + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp_100mhz { + fsl,pins = < + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170b9 + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130b9 + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170b9 + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170b9 + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170b9 + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp_200mhz { + fsl,pins = < + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130f9 + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170f9 + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170f9 + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170f9 + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170f9 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__SD3_CMD 0x17061 + MX6SLL_PAD_SD3_CLK__SD3_CLK 0x13061 + MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x17061 + MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x17061 + MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x17061 + MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x17061 + MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170a1 + MX6SLL_PAD_SD3_CLK__SD3_CLK 0x130a1 + MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170a1 + MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170a1 + MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170a1 + MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170a1 + MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170e9 + MX6SLL_PAD_SD3_CLK__SD3_CLK 0x130f9 + MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170e9 + MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170e9 + MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170e9 + MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170e9 + MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1 + MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_lcd: lcdgrp { + fsl,pins = < + MX6SLL_PAD_LCD_DATA00__LCD_DATA00 0x79 + MX6SLL_PAD_LCD_DATA01__LCD_DATA01 0x79 + MX6SLL_PAD_LCD_DATA02__LCD_DATA02 0x79 + MX6SLL_PAD_LCD_DATA03__LCD_DATA03 0x79 + MX6SLL_PAD_LCD_DATA04__LCD_DATA04 0x79 + MX6SLL_PAD_LCD_DATA05__LCD_DATA05 0x79 + MX6SLL_PAD_LCD_DATA06__LCD_DATA06 0x79 + MX6SLL_PAD_LCD_DATA07__LCD_DATA07 0x79 + MX6SLL_PAD_LCD_DATA08__LCD_DATA08 0x79 + MX6SLL_PAD_LCD_DATA09__LCD_DATA09 0x79 + MX6SLL_PAD_LCD_DATA10__LCD_DATA10 0x79 + MX6SLL_PAD_LCD_DATA11__LCD_DATA11 0x79 + MX6SLL_PAD_LCD_DATA12__LCD_DATA12 0x79 + MX6SLL_PAD_LCD_DATA13__LCD_DATA13 0x79 + MX6SLL_PAD_LCD_DATA14__LCD_DATA14 0x79 + MX6SLL_PAD_LCD_DATA15__LCD_DATA15 0x79 + MX6SLL_PAD_LCD_DATA16__LCD_DATA16 0x79 + MX6SLL_PAD_LCD_DATA17__LCD_DATA17 0x79 + MX6SLL_PAD_LCD_DATA18__LCD_DATA18 0x79 + MX6SLL_PAD_LCD_DATA19__LCD_DATA19 0x79 + MX6SLL_PAD_LCD_DATA20__LCD_DATA20 0x79 + MX6SLL_PAD_LCD_DATA21__LCD_DATA21 0x79 + MX6SLL_PAD_LCD_DATA22__LCD_DATA22 0x79 + MX6SLL_PAD_LCD_DATA23__LCD_DATA23 0x79 + MX6SLL_PAD_LCD_CLK__LCD_CLK 0x79 + MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE 0x79 + MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC 0x79 + MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC 0x79 + MX6SLL_PAD_LCD_RESET__LCD_RESET 0x79 + >; + }; + + pinctrl_pwm1: pmw1grp { + fsl,pins = < + MX6SLL_PAD_PWM1__PWM1_OUT 0x110b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6sll-pinfunc.h b/arch/arm/boot/dts/imx6sll-pinfunc.h new file mode 100644 index 000000000000..713a346f4c89 --- /dev/null +++ b/arch/arm/boot/dts/imx6sll-pinfunc.h @@ -0,0 +1,880 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP. + * + */ + +#ifndef __DTS_IMX6SLL_PINFUNC_H +#define __DTS_IMX6SLL_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ +#define MX6SLL_PAD_WDOG_B__WDOG1_B 0x0014 0x02DC 0x0000 0x0 0x0 +#define MX6SLL_PAD_WDOG_B__WDOG1_RESET_B_DEB 0x0014 0x02DC 0x0000 0x1 0x0 +#define MX6SLL_PAD_WDOG_B__UART5_RI_B 0x0014 0x02DC 0x0000 0x2 0x0 +#define MX6SLL_PAD_WDOG_B__GPIO3_IO18 0x0014 0x02DC 0x0000 0x5 0x0 +#define MX6SLL_PAD_REF_CLK_24M__XTALOSC_REF_CLK_24M 0x0018 0x02E0 0x0000 0x0 0x0 +#define MX6SLL_PAD_REF_CLK_24M__I2C3_SCL 0x0018 0x02E0 0x068C 0x1 0x0 +#define MX6SLL_PAD_REF_CLK_24M__PWM3_OUT 0x0018 0x02E0 0x0000 0x2 0x0 +#define MX6SLL_PAD_REF_CLK_24M__USB_OTG2_ID 0x0018 0x02E0 0x0560 0x3 0x0 +#define MX6SLL_PAD_REF_CLK_24M__CCM_PMIC_READY 0x0018 0x02E0 0x05AC 0x4 0x0 +#define MX6SLL_PAD_REF_CLK_24M__GPIO3_IO21 0x0018 0x02E0 0x0000 0x5 0x0 +#define MX6SLL_PAD_REF_CLK_24M__SD3_WP 0x0018 0x02E0 0x0794 0x6 0x0 +#define MX6SLL_PAD_REF_CLK_32K__XTALOSC_REF_CLK_32K 0x001C 0x02E4 0x0000 0x0 0x0 +#define MX6SLL_PAD_REF_CLK_32K__I2C3_SDA 0x001C 0x02E4 0x0690 0x1 0x0 +#define MX6SLL_PAD_REF_CLK_32K__PWM4_OUT 0x001C 0x02E4 0x0000 0x2 0x0 +#define MX6SLL_PAD_REF_CLK_32K__USB_OTG1_ID 0x001C 0x02E4 0x055C 0x3 0x0 +#define MX6SLL_PAD_REF_CLK_32K__SD1_LCTL 0x001C 0x02E4 0x0000 0x4 0x0 +#define MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x001C 0x02E4 0x0000 0x5 0x0 +#define MX6SLL_PAD_REF_CLK_32K__SD3_CD_B 0x001C 0x02E4 0x0780 0x6 0x0 +#define MX6SLL_PAD_PWM1__PWM1_OUT 0x0020 0x02E8 0x0000 0x0 0x0 +#define MX6SLL_PAD_PWM1__CCM_CLKO 0x0020 0x02E8 0x0000 0x1 0x0 +#define MX6SLL_PAD_PWM1__AUDIO_CLK_OUT 0x0020 0x02E8 0x0000 0x2 0x0 +#define MX6SLL_PAD_PWM1__CSI_MCLK 0x0020 0x02E8 0x0000 0x4 0x0 +#define MX6SLL_PAD_PWM1__GPIO3_IO23 0x0020 0x02E8 0x0000 0x5 0x0 +#define MX6SLL_PAD_PWM1__EPIT1_OUT 0x0020 0x02E8 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_COL0__KEY_COL0 0x0024 0x02EC 0x06A0 0x0 0x0 +#define MX6SLL_PAD_KEY_COL0__I2C2_SCL 0x0024 0x02EC 0x0684 0x1 0x0 +#define MX6SLL_PAD_KEY_COL0__LCD_DATA00 0x0024 0x02EC 0x06D8 0x2 0x0 +#define MX6SLL_PAD_KEY_COL0__SD1_CD_B 0x0024 0x02EC 0x0770 0x4 0x1 +#define MX6SLL_PAD_KEY_COL0__GPIO3_IO24 0x0024 0x02EC 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW0__KEY_ROW0 0x0028 0x02F0 0x06C0 0x0 0x0 +#define MX6SLL_PAD_KEY_ROW0__I2C2_SDA 0x0028 0x02F0 0x0688 0x1 0x0 +#define MX6SLL_PAD_KEY_ROW0__LCD_DATA01 0x0028 0x02F0 0x06DC 0x2 0x0 +#define MX6SLL_PAD_KEY_ROW0__SD1_WP 0x0028 0x02F0 0x0774 0x4 0x1 +#define MX6SLL_PAD_KEY_ROW0__GPIO3_IO25 0x0028 0x02F0 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL1__KEY_COL1 0x002C 0x02F4 0x06A4 0x0 0x0 +#define MX6SLL_PAD_KEY_COL1__ECSPI4_MOSI 0x002C 0x02F4 0x0658 0x1 0x1 +#define MX6SLL_PAD_KEY_COL1__LCD_DATA02 0x002C 0x02F4 0x06E0 0x2 0x0 +#define MX6SLL_PAD_KEY_COL1__SD3_DATA4 0x002C 0x02F4 0x0784 0x4 0x0 +#define MX6SLL_PAD_KEY_COL1__GPIO3_IO26 0x002C 0x02F4 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW1__KEY_ROW1 0x0030 0x02F8 0x06C4 0x0 0x0 +#define MX6SLL_PAD_KEY_ROW1__ECSPI4_MISO 0x0030 0x02F8 0x0654 0x1 0x1 +#define MX6SLL_PAD_KEY_ROW1__LCD_DATA03 0x0030 0x02F8 0x06E4 0x2 0x0 +#define MX6SLL_PAD_KEY_ROW1__CSI_FIELD 0x0030 0x02F8 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_ROW1__SD3_DATA5 0x0030 0x02F8 0x0788 0x4 0x0 +#define MX6SLL_PAD_KEY_ROW1__GPIO3_IO27 0x0030 0x02F8 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL2__KEY_COL2 0x0034 0x02FC 0x06A8 0x0 0x0 +#define MX6SLL_PAD_KEY_COL2__ECSPI4_SS0 0x0034 0x02FC 0x065C 0x1 0x1 +#define MX6SLL_PAD_KEY_COL2__LCD_DATA04 0x0034 0x02FC 0x06E8 0x2 0x0 +#define MX6SLL_PAD_KEY_COL2__CSI_DATA12 0x0034 0x02FC 0x05B8 0x3 0x1 +#define MX6SLL_PAD_KEY_COL2__SD3_DATA6 0x0034 0x02FC 0x078C 0x4 0x0 +#define MX6SLL_PAD_KEY_COL2__GPIO3_IO28 0x0034 0x02FC 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW2__KEY_ROW2 0x0038 0x0300 0x06C8 0x0 0x0 +#define MX6SLL_PAD_KEY_ROW2__ECSPI4_SCLK 0x0038 0x0300 0x0650 0x1 0x1 +#define MX6SLL_PAD_KEY_ROW2__LCD_DATA05 0x0038 0x0300 0x06EC 0x2 0x0 +#define MX6SLL_PAD_KEY_ROW2__CSI_DATA13 0x0038 0x0300 0x05BC 0x3 0x1 +#define MX6SLL_PAD_KEY_ROW2__SD3_DATA7 0x0038 0x0300 0x0790 0x4 0x0 +#define MX6SLL_PAD_KEY_ROW2__GPIO3_IO29 0x0038 0x0300 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL3__KEY_COL3 0x003C 0x0304 0x06AC 0x0 0x0 +#define MX6SLL_PAD_KEY_COL3__AUD6_RXFS 0x003C 0x0304 0x05A0 0x1 0x1 +#define MX6SLL_PAD_KEY_COL3__LCD_DATA06 0x003C 0x0304 0x06F0 0x2 0x0 +#define MX6SLL_PAD_KEY_COL3__CSI_DATA14 0x003C 0x0304 0x05C0 0x3 0x1 +#define MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x003C 0x0304 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL3__SD1_RESET 0x003C 0x0304 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_ROW3__KEY_ROW3 0x0040 0x0308 0x06CC 0x0 0x1 +#define MX6SLL_PAD_KEY_ROW3__AUD6_RXC 0x0040 0x0308 0x059C 0x1 0x1 +#define MX6SLL_PAD_KEY_ROW3__LCD_DATA07 0x0040 0x0308 0x06F4 0x2 0x1 +#define MX6SLL_PAD_KEY_ROW3__CSI_DATA15 0x0040 0x0308 0x05C4 0x3 0x2 +#define MX6SLL_PAD_KEY_ROW3__GPIO3_IO31 0x0040 0x0308 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW3__SD1_VSELECT 0x0040 0x0308 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_COL4__KEY_COL4 0x0044 0x030C 0x06B0 0x0 0x1 +#define MX6SLL_PAD_KEY_COL4__AUD6_RXD 0x0044 0x030C 0x0594 0x1 0x1 +#define MX6SLL_PAD_KEY_COL4__LCD_DATA08 0x0044 0x030C 0x06F8 0x2 0x1 +#define MX6SLL_PAD_KEY_COL4__CSI_DATA16 0x0044 0x030C 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x0044 0x030C 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL4__USB_OTG1_PWR 0x0044 0x030C 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_ROW4__KEY_ROW4 0x0048 0x0310 0x06D0 0x0 0x1 +#define MX6SLL_PAD_KEY_ROW4__AUD6_TXC 0x0048 0x0310 0x05A4 0x1 0x1 +#define MX6SLL_PAD_KEY_ROW4__LCD_DATA09 0x0048 0x0310 0x06FC 0x2 0x1 +#define MX6SLL_PAD_KEY_ROW4__CSI_DATA17 0x0048 0x0310 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_ROW4__GPIO4_IO01 0x0048 0x0310 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW4__USB_OTG1_OC 0x0048 0x0310 0x076C 0x6 0x2 +#define MX6SLL_PAD_KEY_COL5__KEY_COL5 0x004C 0x0314 0x0694 0x0 0x1 +#define MX6SLL_PAD_KEY_COL5__AUD6_TXFS 0x004C 0x0314 0x05A8 0x1 0x1 +#define MX6SLL_PAD_KEY_COL5__LCD_DATA10 0x004C 0x0314 0x0700 0x2 0x0 +#define MX6SLL_PAD_KEY_COL5__CSI_DATA18 0x004C 0x0314 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x004C 0x0314 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL5__USB_OTG2_PWR 0x004C 0x0314 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_ROW5__KEY_ROW5 0x0050 0x0318 0x06B4 0x0 0x2 +#define MX6SLL_PAD_KEY_ROW5__AUD6_TXD 0x0050 0x0318 0x0598 0x1 0x1 +#define MX6SLL_PAD_KEY_ROW5__LCD_DATA11 0x0050 0x0318 0x0704 0x2 0x1 +#define MX6SLL_PAD_KEY_ROW5__CSI_DATA19 0x0050 0x0318 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_ROW5__GPIO4_IO03 0x0050 0x0318 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW5__USB_OTG2_OC 0x0050 0x0318 0x0768 0x6 0x3 +#define MX6SLL_PAD_KEY_COL6__KEY_COL6 0x0054 0x031C 0x0698 0x0 0x2 +#define MX6SLL_PAD_KEY_COL6__UART4_DCE_RX 0x0054 0x031C 0x075C 0x1 0x2 +#define MX6SLL_PAD_KEY_COL6__UART4_DTE_TX 0x0054 0x031C 0x0000 0x1 0x0 +#define MX6SLL_PAD_KEY_COL6__LCD_DATA12 0x0054 0x031C 0x0708 0x2 0x1 +#define MX6SLL_PAD_KEY_COL6__CSI_DATA20 0x0054 0x031C 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x0054 0x031C 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL6__SD3_RESET 0x0054 0x031C 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_ROW6__KEY_ROW6 0x0058 0x0320 0x06B8 0x0 0x2 +#define MX6SLL_PAD_KEY_ROW6__UART4_DCE_TX 0x0058 0x0320 0x0000 0x1 0x0 +#define MX6SLL_PAD_KEY_ROW6__UART4_DTE_RX 0x0058 0x0320 0x075C 0x1 0x3 +#define MX6SLL_PAD_KEY_ROW6__LCD_DATA13 0x0058 0x0320 0x070C 0x2 0x1 +#define MX6SLL_PAD_KEY_ROW6__CSI_DATA21 0x0058 0x0320 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_ROW6__GPIO4_IO05 0x0058 0x0320 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW6__SD3_VSELECT 0x0058 0x0320 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_COL7__KEY_COL7 0x005C 0x0324 0x069C 0x0 0x2 +#define MX6SLL_PAD_KEY_COL7__UART4_DCE_RTS 0x005C 0x0324 0x0758 0x1 0x2 +#define MX6SLL_PAD_KEY_COL7__UART4_DTE_CTS 0x005C 0x0324 0x0000 0x1 0x0 +#define MX6SLL_PAD_KEY_COL7__LCD_DATA14 0x005C 0x0324 0x0710 0x2 0x1 +#define MX6SLL_PAD_KEY_COL7__CSI_DATA22 0x005C 0x0324 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_COL7__GPIO4_IO06 0x005C 0x0324 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL7__SD1_WP 0x005C 0x0324 0x0774 0x6 0x3 +#define MX6SLL_PAD_KEY_ROW7__KEY_ROW7 0x0060 0x0328 0x06BC 0x0 0x2 +#define MX6SLL_PAD_KEY_ROW7__UART4_DCE_CTS 0x0060 0x0328 0x0000 0x1 0x0 +#define MX6SLL_PAD_KEY_ROW7__UART4_DTE_RTS 0x0060 0x0328 0x0758 0x1 0x3 +#define MX6SLL_PAD_KEY_ROW7__LCD_DATA15 0x0060 0x0328 0x0714 0x2 0x1 +#define MX6SLL_PAD_KEY_ROW7__CSI_DATA23 0x0060 0x0328 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_ROW7__GPIO4_IO07 0x0060 0x0328 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW7__SD1_CD_B 0x0060 0x0328 0x0770 0x6 0x3 +#define MX6SLL_PAD_EPDC_DATA00__EPDC_DATA00 0x0064 0x032C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA00__ECSPI4_MOSI 0x0064 0x032C 0x0658 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA00__LCD_DATA24 0x0064 0x032C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA00__CSI_DATA00 0x0064 0x032C 0x05C8 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA00__GPIO1_IO07 0x0064 0x032C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA01__EPDC_DATA01 0x0068 0x0330 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA01__ECSPI4_MISO 0x0068 0x0330 0x0654 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA01__LCD_DATA25 0x0068 0x0330 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA01__CSI_DATA01 0x0068 0x0330 0x05CC 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA01__GPIO1_IO08 0x0068 0x0330 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA02__EPDC_DATA02 0x006C 0x0334 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA02__ECSPI4_SS0 0x006C 0x0334 0x065C 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA02__LCD_DATA26 0x006C 0x0334 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA02__CSI_DATA02 0x006C 0x0334 0x05D0 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA02__GPIO1_IO09 0x006C 0x0334 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA03__EPDC_DATA03 0x0070 0x0338 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA03__ECSPI4_SCLK 0x0070 0x0338 0x0650 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA03__LCD_DATA27 0x0070 0x0338 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA03__CSI_DATA03 0x0070 0x0338 0x05D4 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA03__GPIO1_IO10 0x0070 0x0338 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA04__EPDC_DATA04 0x0074 0x033C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA04__ECSPI4_SS1 0x0074 0x033C 0x0660 0x1 0x1 +#define MX6SLL_PAD_EPDC_DATA04__LCD_DATA28 0x0074 0x033C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA04__CSI_DATA04 0x0074 0x033C 0x05D8 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA04__GPIO1_IO11 0x0074 0x033C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA05__EPDC_DATA05 0x0078 0x0340 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA05__ECSPI4_SS2 0x0078 0x0340 0x0664 0x1 0x1 +#define MX6SLL_PAD_EPDC_DATA05__LCD_DATA29 0x0078 0x0340 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA05__CSI_DATA05 0x0078 0x0340 0x05DC 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA05__GPIO1_IO12 0x0078 0x0340 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA06__EPDC_DATA06 0x007C 0x0344 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA06__ECSPI4_SS3 0x007C 0x0344 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA06__LCD_DATA30 0x007C 0x0344 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA06__CSI_DATA06 0x007C 0x0344 0x05E0 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA06__GPIO1_IO13 0x007C 0x0344 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA07__EPDC_DATA07 0x0080 0x0348 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA07__ECSPI4_RDY 0x0080 0x0348 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA07__LCD_DATA31 0x0080 0x0348 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA07__CSI_DATA07 0x0080 0x0348 0x05E4 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA07__GPIO1_IO14 0x0080 0x0348 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA08__EPDC_DATA08 0x0084 0x034C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA08__ECSPI3_MOSI 0x0084 0x034C 0x063C 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA08__EPDC_PWR_CTRL0 0x0084 0x034C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA08__GPIO1_IO15 0x0084 0x034C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA09__EPDC_DATA09 0x0088 0x0350 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA09__ECSPI3_MISO 0x0088 0x0350 0x0638 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA09__EPDC_PWR_CTRL1 0x0088 0x0350 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA09__GPIO1_IO16 0x0088 0x0350 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA10__EPDC_DATA10 0x008C 0x0354 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA10__ECSPI3_SS0 0x008C 0x0354 0x0648 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA10__EPDC_PWR_CTRL2 0x008C 0x0354 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA10__GPIO1_IO17 0x008C 0x0354 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA11__EPDC_DATA11 0x0090 0x0358 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA11__ECSPI3_SCLK 0x0090 0x0358 0x0630 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA11__EPDC_PWR_CTRL3 0x0090 0x0358 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA11__GPIO1_IO18 0x0090 0x0358 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA12__EPDC_DATA12 0x0094 0x035C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA12__UART2_DCE_RX 0x0094 0x035C 0x074C 0x1 0x4 +#define MX6SLL_PAD_EPDC_DATA12__UART2_DTE_TX 0x0094 0x035C 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA12__EPDC_PWR_COM 0x0094 0x035C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA12__GPIO1_IO19 0x0094 0x035C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA12__ECSPI3_SS1 0x0094 0x035C 0x064C 0x6 0x1 +#define MX6SLL_PAD_EPDC_DATA13__EPDC_DATA13 0x0098 0x0360 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA13__UART2_DCE_TX 0x0098 0x0360 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA13__UART2_DTE_RX 0x0098 0x0360 0x074C 0x1 0x5 +#define MX6SLL_PAD_EPDC_DATA13__EPDC_PWR_IRQ 0x0098 0x0360 0x0668 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA13__GPIO1_IO20 0x0098 0x0360 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA13__ECSPI3_SS2 0x0098 0x0360 0x0640 0x6 0x1 +#define MX6SLL_PAD_EPDC_DATA14__EPDC_DATA14 0x009C 0x0364 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA14__UART2_DCE_RTS 0x009C 0x0364 0x0748 0x1 0x4 +#define MX6SLL_PAD_EPDC_DATA14__UART2_DTE_CTS 0x009C 0x0364 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA14__EPDC_PWR_STAT 0x009C 0x0364 0x066C 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA14__GPIO1_IO21 0x009C 0x0364 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA14__ECSPI3_SS3 0x009C 0x0364 0x0644 0x6 0x1 +#define MX6SLL_PAD_EPDC_DATA15__EPDC_DATA15 0x00A0 0x0368 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA15__UART2_DCE_CTS 0x00A0 0x0368 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA15__UART2_DTE_RTS 0x00A0 0x0368 0x0748 0x1 0x5 +#define MX6SLL_PAD_EPDC_DATA15__EPDC_PWR_WAKE 0x00A0 0x0368 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA15__GPIO1_IO22 0x00A0 0x0368 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA15__ECSPI3_RDY 0x00A0 0x0368 0x0634 0x6 0x1 +#define MX6SLL_PAD_EPDC_SDCLK__EPDC_SDCLK_P 0x00A4 0x036C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDCLK__ECSPI2_MOSI 0x00A4 0x036C 0x0624 0x1 0x2 +#define MX6SLL_PAD_EPDC_SDCLK__I2C2_SCL 0x00A4 0x036C 0x0684 0x2 0x2 +#define MX6SLL_PAD_EPDC_SDCLK__CSI_DATA08 0x00A4 0x036C 0x05E8 0x3 0x2 +#define MX6SLL_PAD_EPDC_SDCLK__GPIO1_IO23 0x00A4 0x036C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDLE__EPDC_SDLE 0x00A8 0x0370 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDLE__ECSPI2_MISO 0x00A8 0x0370 0x0620 0x1 0x2 +#define MX6SLL_PAD_EPDC_SDLE__I2C2_SDA 0x00A8 0x0370 0x0688 0x2 0x2 +#define MX6SLL_PAD_EPDC_SDLE__CSI_DATA09 0x00A8 0x0370 0x05EC 0x3 0x2 +#define MX6SLL_PAD_EPDC_SDLE__GPIO1_IO24 0x00A8 0x0370 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDOE__EPDC_SDOE 0x00AC 0x0374 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDOE__ECSPI2_SS0 0x00AC 0x0374 0x0628 0x1 0x1 +#define MX6SLL_PAD_EPDC_SDOE__CSI_DATA10 0x00AC 0x0374 0x05B0 0x3 0x2 +#define MX6SLL_PAD_EPDC_SDOE__GPIO1_IO25 0x00AC 0x0374 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDSHR__EPDC_SDSHR 0x00B0 0x0378 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDSHR__ECSPI2_SCLK 0x00B0 0x0378 0x061C 0x1 0x2 +#define MX6SLL_PAD_EPDC_SDSHR__EPDC_SDCE4 0x00B0 0x0378 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_SDSHR__CSI_DATA11 0x00B0 0x0378 0x05B4 0x3 0x2 +#define MX6SLL_PAD_EPDC_SDSHR__GPIO1_IO26 0x00B0 0x0378 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDCE0__EPDC_SDCE0 0x00B4 0x037C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDCE0__ECSPI2_SS1 0x00B4 0x037C 0x062C 0x1 0x1 +#define MX6SLL_PAD_EPDC_SDCE0__PWM3_OUT 0x00B4 0x037C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_SDCE0__GPIO1_IO27 0x00B4 0x037C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDCE1__EPDC_SDCE1 0x00B8 0x0380 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDCE1__WDOG2_B 0x00B8 0x0380 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_SDCE1__PWM4_OUT 0x00B8 0x0380 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_SDCE1__GPIO1_IO28 0x00B8 0x0380 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDCE2__EPDC_SDCE2 0x00BC 0x0384 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDCE2__I2C3_SCL 0x00BC 0x0384 0x068C 0x1 0x2 +#define MX6SLL_PAD_EPDC_SDCE2__PWM1_OUT 0x00BC 0x0384 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_SDCE2__GPIO1_IO29 0x00BC 0x0384 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDCE3__EPDC_SDCE3 0x00C0 0x0388 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDCE3__I2C3_SDA 0x00C0 0x0388 0x0690 0x1 0x2 +#define MX6SLL_PAD_EPDC_SDCE3__PWM2_OUT 0x00C0 0x0388 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_SDCE3__GPIO1_IO30 0x00C0 0x0388 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_GDCLK__EPDC_GDCLK 0x00C4 0x038C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_GDCLK__ECSPI2_SS2 0x00C4 0x038C 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_GDCLK__CSI_PIXCLK 0x00C4 0x038C 0x05F4 0x3 0x2 +#define MX6SLL_PAD_EPDC_GDCLK__GPIO1_IO31 0x00C4 0x038C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_GDCLK__SD2_RESET 0x00C4 0x038C 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_GDOE__EPDC_GDOE 0x00C8 0x0390 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_GDOE__ECSPI2_SS3 0x00C8 0x0390 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_GDOE__CSI_HSYNC 0x00C8 0x0390 0x05F0 0x3 0x2 +#define MX6SLL_PAD_EPDC_GDOE__GPIO2_IO00 0x00C8 0x0390 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_GDOE__SD2_VSELECT 0x00C8 0x0390 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_GDRL__EPDC_GDRL 0x00CC 0x0394 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_GDRL__ECSPI2_RDY 0x00CC 0x0394 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_GDRL__CSI_MCLK 0x00CC 0x0394 0x0000 0x3 0x0 +#define MX6SLL_PAD_EPDC_GDRL__GPIO2_IO01 0x00CC 0x0394 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_GDRL__SD2_WP 0x00CC 0x0394 0x077C 0x6 0x2 +#define MX6SLL_PAD_EPDC_GDSP__EPDC_GDSP 0x00D0 0x0398 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_GDSP__PWM4_OUT 0x00D0 0x0398 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_GDSP__CSI_VSYNC 0x00D0 0x0398 0x05F8 0x3 0x2 +#define MX6SLL_PAD_EPDC_GDSP__GPIO2_IO02 0x00D0 0x0398 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_GDSP__SD2_CD_B 0x00D0 0x0398 0x0778 0x6 0x2 +#define MX6SLL_PAD_EPDC_VCOM0__EPDC_VCOM0 0x00D4 0x039C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_VCOM0__AUD5_RXFS 0x00D4 0x039C 0x0588 0x1 0x1 +#define MX6SLL_PAD_EPDC_VCOM0__UART3_DCE_RX 0x00D4 0x039C 0x0754 0x2 0x4 +#define MX6SLL_PAD_EPDC_VCOM0__UART3_DTE_TX 0x00D4 0x039C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_VCOM0__GPIO2_IO03 0x00D4 0x039C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_VCOM0__EPDC_SDCE5 0x00D4 0x039C 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_VCOM1__EPDC_VCOM1 0x00D8 0x03A0 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_VCOM1__AUD5_RXD 0x00D8 0x03A0 0x057C 0x1 0x1 +#define MX6SLL_PAD_EPDC_VCOM1__UART3_DCE_TX 0x00D8 0x03A0 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_VCOM1__UART3_DTE_RX 0x00D8 0x03A0 0x0754 0x2 0x5 +#define MX6SLL_PAD_EPDC_VCOM1__GPIO2_IO04 0x00D8 0x03A0 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_VCOM1__EPDC_SDCE6 0x00D8 0x03A0 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_BDR0__EPDC_BDR0 0x00DC 0x03A4 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_BDR0__UART3_DCE_RTS 0x00DC 0x03A4 0x0750 0x2 0x2 +#define MX6SLL_PAD_EPDC_BDR0__UART3_DTE_CTS 0x00DC 0x03A4 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_BDR0__GPIO2_IO05 0x00DC 0x03A4 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_BDR0__EPDC_SDCE7 0x00DC 0x03A4 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_BDR1__EPDC_BDR1 0x00E0 0x03A8 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_BDR1__UART3_DCE_CTS 0x00E0 0x03A8 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_BDR1__UART3_DTE_RTS 0x00E0 0x03A8 0x0750 0x2 0x3 +#define MX6SLL_PAD_EPDC_BDR1__GPIO2_IO06 0x00E0 0x03A8 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_BDR1__EPDC_SDCE8 0x00E0 0x03A8 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL0__EPDC_PWR_CTRL0 0x00E4 0x03AC 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL0__AUD5_RXC 0x00E4 0x03AC 0x0584 0x1 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL0__LCD_DATA16 0x00E4 0x03AC 0x0718 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL0__GPIO2_IO07 0x00E4 0x03AC 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL1__EPDC_PWR_CTRL1 0x00E8 0x03B0 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL1__AUD5_TXFS 0x00E8 0x03B0 0x0590 0x1 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL1__LCD_DATA17 0x00E8 0x03B0 0x071C 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL1__GPIO2_IO08 0x00E8 0x03B0 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL2__EPDC_PWR_CTRL2 0x00EC 0x03B4 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL2__AUD5_TXD 0x00EC 0x03B4 0x0580 0x1 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL2__LCD_DATA18 0x00EC 0x03B4 0x0720 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL2__GPIO2_IO09 0x00EC 0x03B4 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL3__EPDC_PWR_CTRL3 0x00F0 0x03B8 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL3__AUD5_TXC 0x00F0 0x03B8 0x058C 0x1 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL3__LCD_DATA19 0x00F0 0x03B8 0x0724 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL3__GPIO2_IO10 0x00F0 0x03B8 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_COM__EPDC_PWR_COM 0x00F4 0x03BC 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_COM__LCD_DATA20 0x00F4 0x03BC 0x0728 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x00F4 0x03BC 0x055C 0x4 0x4 +#define MX6SLL_PAD_EPDC_PWR_COM__GPIO2_IO11 0x00F4 0x03BC 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_COM__SD3_RESET 0x00F4 0x03BC 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_PWR_IRQ__EPDC_PWR_IRQ 0x00F8 0x03C0 0x0668 0x0 0x1 +#define MX6SLL_PAD_EPDC_PWR_IRQ__LCD_DATA21 0x00F8 0x03C0 0x072C 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_IRQ__USB_OTG2_ID 0x00F8 0x03C0 0x0560 0x4 0x3 +#define MX6SLL_PAD_EPDC_PWR_IRQ__GPIO2_IO12 0x00F8 0x03C0 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_IRQ__SD3_VSELECT 0x00F8 0x03C0 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_PWR_STAT__EPDC_PWR_STAT 0x00FC 0x03C4 0x066C 0x0 0x1 +#define MX6SLL_PAD_EPDC_PWR_STAT__LCD_DATA22 0x00FC 0x03C4 0x0730 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_STAT__ARM_EVENTI 0x00FC 0x03C4 0x0000 0x4 0x0 +#define MX6SLL_PAD_EPDC_PWR_STAT__GPIO2_IO13 0x00FC 0x03C4 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_STAT__SD3_WP 0x00FC 0x03C4 0x0794 0x6 0x2 +#define MX6SLL_PAD_EPDC_PWR_WAKE__EPDC_PWR_WAKE 0x0100 0x03C8 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_WAKE__LCD_DATA23 0x0100 0x03C8 0x0734 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_WAKE__ARM_EVENTO 0x0100 0x03C8 0x0000 0x4 0x0 +#define MX6SLL_PAD_EPDC_PWR_WAKE__GPIO2_IO14 0x0100 0x03C8 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_WAKE__SD3_CD_B 0x0100 0x03C8 0x0780 0x6 0x2 +#define MX6SLL_PAD_LCD_CLK__LCD_CLK 0x0104 0x03CC 0x0000 0x0 0x0 +#define MX6SLL_PAD_LCD_CLK__LCD_WR_RWN 0x0104 0x03CC 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_CLK__PWM4_OUT 0x0104 0x03CC 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_CLK__GPIO2_IO15 0x0104 0x03CC 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE 0x0108 0x03D0 0x0000 0x0 0x0 +#define MX6SLL_PAD_LCD_ENABLE__LCD_RD_E 0x0108 0x03D0 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_ENABLE__UART2_DCE_RX 0x0108 0x03D0 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_ENABLE__UART2_DTE_TX 0x0108 0x03D0 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16 0x0108 0x03D0 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC 0x010C 0x03D4 0x06D4 0x0 0x0 +#define MX6SLL_PAD_LCD_HSYNC__LCD_CS 0x010C 0x03D4 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_HSYNC__UART2_DCE_TX 0x010C 0x03D4 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_HSYNC__UART2_DTE_RX 0x010C 0x03D4 0x074C 0x4 0x1 +#define MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17 0x010C 0x03D4 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_HSYNC__ARM_TRACE_CLK 0x010C 0x03D4 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC 0x0110 0x03D8 0x0000 0x0 0x0 +#define MX6SLL_PAD_LCD_VSYNC__LCD_RS 0x0110 0x03D8 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_VSYNC__UART2_DCE_RTS 0x0110 0x03D8 0x0748 0x4 0x0 +#define MX6SLL_PAD_LCD_VSYNC__UART2_DTE_CTS 0x0110 0x03D8 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18 0x0110 0x03D8 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_VSYNC__ARM_TRACE_CTL 0x0110 0x03D8 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_RESET__LCD_RESET 0x0114 0x03DC 0x0000 0x0 0x0 +#define MX6SLL_PAD_LCD_RESET__LCD_BUSY 0x0114 0x03DC 0x06D4 0x2 0x1 +#define MX6SLL_PAD_LCD_RESET__UART2_DCE_CTS 0x0114 0x03DC 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_RESET__UART2_DTE_RTS 0x0114 0x03DC 0x0748 0x4 0x1 +#define MX6SLL_PAD_LCD_RESET__GPIO2_IO19 0x0114 0x03DC 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_RESET__CCM_PMIC_READY 0x0114 0x03DC 0x05AC 0x6 0x2 +#define MX6SLL_PAD_LCD_DATA00__LCD_DATA00 0x0118 0x03E0 0x06D8 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA00__ECSPI1_MOSI 0x0118 0x03E0 0x0608 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA00__USB_OTG2_ID 0x0118 0x03E0 0x0560 0x2 0x2 +#define MX6SLL_PAD_LCD_DATA00__PWM1_OUT 0x0118 0x03E0 0x0000 0x3 0x0 +#define MX6SLL_PAD_LCD_DATA00__UART5_DTR_B 0x0118 0x03E0 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA00__GPIO2_IO20 0x0118 0x03E0 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA00__ARM_TRACE00 0x0118 0x03E0 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA00__SRC_BOOT_CFG00 0x0118 0x03E0 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA01__LCD_DATA01 0x011C 0x03E4 0x06DC 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA01__ECSPI1_MISO 0x011C 0x03E4 0x0604 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA01__USB_OTG1_ID 0x011C 0x03E4 0x055C 0x2 0x3 +#define MX6SLL_PAD_LCD_DATA01__PWM2_OUT 0x011C 0x03E4 0x0000 0x3 0x0 +#define MX6SLL_PAD_LCD_DATA01__AUD4_RXFS 0x011C 0x03E4 0x0570 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA01__GPIO2_IO21 0x011C 0x03E4 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA01__ARM_TRACE01 0x011C 0x03E4 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA01__SRC_BOOT_CFG01 0x011C 0x03E4 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA02__LCD_DATA02 0x0120 0x03E8 0x06E0 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA02__ECSPI1_SS0 0x0120 0x03E8 0x0614 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA02__EPIT2_OUT 0x0120 0x03E8 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA02__PWM3_OUT 0x0120 0x03E8 0x0000 0x3 0x0 +#define MX6SLL_PAD_LCD_DATA02__AUD4_RXC 0x0120 0x03E8 0x056C 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA02__GPIO2_IO22 0x0120 0x03E8 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA02__ARM_TRACE02 0x0120 0x03E8 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA02__SRC_BOOT_CFG02 0x0120 0x03E8 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA03__LCD_DATA03 0x0124 0x03EC 0x06E4 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA03__ECSPI1_SCLK 0x0124 0x03EC 0x05FC 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA03__UART5_DSR_B 0x0124 0x03EC 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA03__PWM4_OUT 0x0124 0x03EC 0x0000 0x3 0x0 +#define MX6SLL_PAD_LCD_DATA03__AUD4_RXD 0x0124 0x03EC 0x0564 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA03__GPIO2_IO23 0x0124 0x03EC 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA03__ARM_TRACE03 0x0124 0x03EC 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA03__SRC_BOOT_CFG03 0x0124 0x03EC 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA04__LCD_DATA04 0x0128 0x03F0 0x06E8 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA04__ECSPI1_SS1 0x0128 0x03F0 0x060C 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA04__CSI_VSYNC 0x0128 0x03F0 0x05F8 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA04__WDOG2_RESET_B_DEB 0x0128 0x03F0 0x0000 0x3 0x0 +#define MX6SLL_PAD_LCD_DATA04__AUD4_TXC 0x0128 0x03F0 0x0574 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA04__GPIO2_IO24 0x0128 0x03F0 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA04__ARM_TRACE04 0x0128 0x03F0 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA04__SRC_BOOT_CFG04 0x0128 0x03F0 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA05__LCD_DATA05 0x012C 0x03F4 0x06EC 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA05__ECSPI1_SS2 0x012C 0x03F4 0x0610 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA05__CSI_HSYNC 0x012C 0x03F4 0x05F0 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA05__AUD4_TXFS 0x012C 0x03F4 0x0578 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA05__GPIO2_IO25 0x012C 0x03F4 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA05__ARM_TRACE05 0x012C 0x03F4 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA05__SRC_BOOT_CFG05 0x012C 0x03F4 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA06__LCD_DATA06 0x0130 0x03F8 0x06F0 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA06__ECSPI1_SS3 0x0130 0x03F8 0x0618 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA06__CSI_PIXCLK 0x0130 0x03F8 0x05F4 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA06__AUD4_TXD 0x0130 0x03F8 0x0568 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA06__GPIO2_IO26 0x0130 0x03F8 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA06__ARM_TRACE06 0x0130 0x03F8 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA06__SRC_BOOT_CFG06 0x0130 0x03F8 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA07__LCD_DATA07 0x0134 0x03FC 0x06F4 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA07__ECSPI1_RDY 0x0134 0x03FC 0x0600 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA07__CSI_MCLK 0x0134 0x03FC 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA07__AUDIO_CLK_OUT 0x0134 0x03FC 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA07__GPIO2_IO27 0x0134 0x03FC 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA07__ARM_TRACE07 0x0134 0x03FC 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA07__SRC_BOOT_CFG07 0x0134 0x03FC 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA08__LCD_DATA08 0x0138 0x0400 0x06F8 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA08__KEY_COL0 0x0138 0x0400 0x06A0 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA08__CSI_DATA09 0x0138 0x0400 0x05EC 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA08__ECSPI2_SCLK 0x0138 0x0400 0x061C 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA08__GPIO2_IO28 0x0138 0x0400 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA08__ARM_TRACE08 0x0138 0x0400 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA08__SRC_BOOT_CFG08 0x0138 0x0400 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA09__LCD_DATA09 0x013C 0x0404 0x06FC 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA09__KEY_ROW0 0x013C 0x0404 0x06C0 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA09__CSI_DATA08 0x013C 0x0404 0x05E8 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA09__ECSPI2_MOSI 0x013C 0x0404 0x0624 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA09__GPIO2_IO29 0x013C 0x0404 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA09__ARM_TRACE09 0x013C 0x0404 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA09__SRC_BOOT_CFG09 0x013C 0x0404 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA10__LCD_DATA10 0x0140 0x0408 0x0700 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA10__KEY_COL1 0x0140 0x0408 0x06A4 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA10__CSI_DATA07 0x0140 0x0408 0x05E4 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA10__ECSPI2_MISO 0x0140 0x0408 0x0620 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA10__GPIO2_IO30 0x0140 0x0408 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA10__ARM_TRACE10 0x0140 0x0408 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA10__SRC_BOOT_CFG10 0x0140 0x0408 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA11__LCD_DATA11 0x0144 0x040C 0x0704 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA11__KEY_ROW1 0x0144 0x040C 0x06C4 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA11__CSI_DATA06 0x0144 0x040C 0x05E0 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA11__ECSPI2_SS1 0x0144 0x040C 0x062C 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA11__GPIO2_IO31 0x0144 0x040C 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA11__ARM_TRACE11 0x0144 0x040C 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA11__SRC_BOOT_CFG11 0x0144 0x040C 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA12__LCD_DATA12 0x0148 0x0410 0x0708 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA12__KEY_COL2 0x0148 0x0410 0x06A8 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA12__CSI_DATA05 0x0148 0x0410 0x05DC 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA12__UART5_DCE_RTS 0x0148 0x0410 0x0760 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA12__UART5_DTE_CTS 0x0148 0x0410 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA12__GPIO3_IO00 0x0148 0x0410 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA12__ARM_TRACE12 0x0148 0x0410 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA12__SRC_BOOT_CFG12 0x0148 0x0410 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA13__LCD_DATA13 0x014C 0x0414 0x070C 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA13__KEY_ROW2 0x014C 0x0414 0x06C8 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA13__CSI_DATA04 0x014C 0x0414 0x05D8 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA13__UART5_DCE_CTS 0x014C 0x0414 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA13__UART5_DTE_RTS 0x014C 0x0414 0x0760 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA13__GPIO3_IO01 0x014C 0x0414 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA13__ARM_TRACE13 0x014C 0x0414 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA13__SRC_BOOT_CFG13 0x014C 0x0414 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA14__LCD_DATA14 0x0150 0x0418 0x0710 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA14__KEY_COL3 0x0150 0x0418 0x06AC 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA14__CSI_DATA03 0x0150 0x0418 0x05D4 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA14__UART5_DCE_RX 0x0150 0x0418 0x0764 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA14__UART5_DTE_TX 0x0150 0x0418 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA14__GPIO3_IO02 0x0150 0x0418 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA14__ARM_TRACE14 0x0150 0x0418 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA14__SRC_BOOT_CFG14 0x0150 0x0418 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA15__LCD_DATA15 0x0154 0x041C 0x0714 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA15__KEY_ROW3 0x0154 0x041C 0x06CC 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA15__CSI_DATA02 0x0154 0x041C 0x05D0 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA15__UART5_DCE_TX 0x0154 0x041C 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA15__UART5_DTE_RX 0x0154 0x041C 0x0764 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA15__GPIO3_IO03 0x0154 0x041C 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA15__ARM_TRACE15 0x0154 0x041C 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA15__SRC_BOOT_CFG15 0x0154 0x041C 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA16__LCD_DATA16 0x0158 0x0420 0x0718 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA16__KEY_COL4 0x0158 0x0420 0x06B0 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA16__CSI_DATA01 0x0158 0x0420 0x05CC 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA16__I2C2_SCL 0x0158 0x0420 0x0684 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA16__GPIO3_IO04 0x0158 0x0420 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA16__SRC_BOOT_CFG24 0x0158 0x0420 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA17__LCD_DATA17 0x015C 0x0424 0x071C 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA17__KEY_ROW4 0x015C 0x0424 0x06D0 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA17__CSI_DATA00 0x015C 0x0424 0x05C8 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA17__I2C2_SDA 0x015C 0x0424 0x0688 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA17__GPIO3_IO05 0x015C 0x0424 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA17__SRC_BOOT_CFG25 0x015C 0x0424 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA18__LCD_DATA18 0x0160 0x0428 0x0720 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA18__KEY_COL5 0x0160 0x0428 0x0694 0x1 0x2 +#define MX6SLL_PAD_LCD_DATA18__CSI_DATA15 0x0160 0x0428 0x05C4 0x2 0x1 +#define MX6SLL_PAD_LCD_DATA18__GPT_CAPTURE1 0x0160 0x0428 0x0670 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA18__GPIO3_IO06 0x0160 0x0428 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA18__SRC_BOOT_CFG26 0x0160 0x0428 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA19__LCD_DATA19 0x0164 0x042C 0x0724 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA19__KEY_ROW5 0x0164 0x042C 0x06B4 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA19__CSI_DATA14 0x0164 0x042C 0x05C0 0x2 0x2 +#define MX6SLL_PAD_LCD_DATA19__GPT_CAPTURE2 0x0164 0x042C 0x0674 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA19__GPIO3_IO07 0x0164 0x042C 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA19__SRC_BOOT_CFG27 0x0164 0x042C 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA20__LCD_DATA20 0x0168 0x0430 0x0728 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA20__KEY_COL6 0x0168 0x0430 0x0698 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA20__CSI_DATA13 0x0168 0x0430 0x05BC 0x2 0x2 +#define MX6SLL_PAD_LCD_DATA20__GPT_COMPARE1 0x0168 0x0430 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA20__GPIO3_IO08 0x0168 0x0430 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA20__SRC_BOOT_CFG28 0x0168 0x0430 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA21__LCD_DATA21 0x016C 0x0434 0x072C 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA21__KEY_ROW6 0x016C 0x0434 0x06B8 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA21__CSI_DATA12 0x016C 0x0434 0x05B8 0x2 0x2 +#define MX6SLL_PAD_LCD_DATA21__GPT_COMPARE2 0x016C 0x0434 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA21__GPIO3_IO09 0x016C 0x0434 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA21__SRC_BOOT_CFG29 0x016C 0x0434 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA22__LCD_DATA22 0x0170 0x0438 0x0730 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA22__KEY_COL7 0x0170 0x0438 0x069C 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA22__CSI_DATA11 0x0170 0x0438 0x05B4 0x2 0x1 +#define MX6SLL_PAD_LCD_DATA22__GPT_COMPARE3 0x0170 0x0438 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA22__GPIO3_IO10 0x0170 0x0438 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA22__SRC_BOOT_CFG30 0x0170 0x0438 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA23__LCD_DATA23 0x0174 0x043C 0x0734 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA23__KEY_ROW7 0x0174 0x043C 0x06BC 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA23__CSI_DATA10 0x0174 0x043C 0x05B0 0x2 0x1 +#define MX6SLL_PAD_LCD_DATA23__GPT_CLKIN 0x0174 0x043C 0x0678 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA23__GPIO3_IO11 0x0174 0x043C 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA23__SRC_BOOT_CFG31 0x0174 0x043C 0x0000 0x7 0x0 +#define MX6SLL_PAD_AUD_RXFS__AUD3_RXFS 0x0178 0x0440 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_RXFS__I2C1_SCL 0x0178 0x0440 0x067C 0x1 0x1 +#define MX6SLL_PAD_AUD_RXFS__UART3_DCE_RX 0x0178 0x0440 0x0754 0x2 0x0 +#define MX6SLL_PAD_AUD_RXFS__UART3_DTE_TX 0x0178 0x0440 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_RXFS__I2C3_SCL 0x0178 0x0440 0x068C 0x4 0x1 +#define MX6SLL_PAD_AUD_RXFS__GPIO1_IO00 0x0178 0x0440 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_RXFS__ECSPI3_SS0 0x0178 0x0440 0x0648 0x6 0x0 +#define MX6SLL_PAD_AUD_RXFS__MBIST_BEND 0x0178 0x0440 0x0000 0x7 0x0 +#define MX6SLL_PAD_AUD_RXC__AUD3_RXC 0x017C 0x0444 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_RXC__I2C1_SDA 0x017C 0x0444 0x0680 0x1 0x1 +#define MX6SLL_PAD_AUD_RXC__UART3_DCE_TX 0x017C 0x0444 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_RXC__UART3_DTE_RX 0x017C 0x0444 0x0754 0x2 0x1 +#define MX6SLL_PAD_AUD_RXC__I2C3_SDA 0x017C 0x0444 0x0690 0x4 0x1 +#define MX6SLL_PAD_AUD_RXC__GPIO1_IO01 0x017C 0x0444 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_RXC__ECSPI3_SS1 0x017C 0x0444 0x064C 0x6 0x0 +#define MX6SLL_PAD_AUD_RXD__AUD3_RXD 0x0180 0x0448 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_RXD__ECSPI3_MOSI 0x0180 0x0448 0x063C 0x1 0x0 +#define MX6SLL_PAD_AUD_RXD__UART4_DCE_RX 0x0180 0x0448 0x075C 0x2 0x0 +#define MX6SLL_PAD_AUD_RXD__UART4_DTE_TX 0x0180 0x0448 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_RXD__SD1_LCTL 0x0180 0x0448 0x0000 0x4 0x0 +#define MX6SLL_PAD_AUD_RXD__GPIO1_IO02 0x0180 0x0448 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_TXC__AUD3_TXC 0x0184 0x044C 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_TXC__ECSPI3_MISO 0x0184 0x044C 0x0638 0x1 0x0 +#define MX6SLL_PAD_AUD_TXC__UART4_DCE_TX 0x0184 0x044C 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_TXC__UART4_DTE_RX 0x0184 0x044C 0x075C 0x2 0x1 +#define MX6SLL_PAD_AUD_TXC__SD2_LCTL 0x0184 0x044C 0x0000 0x4 0x0 +#define MX6SLL_PAD_AUD_TXC__GPIO1_IO03 0x0184 0x044C 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_TXFS__AUD3_TXFS 0x0188 0x0450 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_TXFS__PWM3_OUT 0x0188 0x0450 0x0000 0x1 0x0 +#define MX6SLL_PAD_AUD_TXFS__UART4_DCE_RTS 0x0188 0x0450 0x0758 0x2 0x0 +#define MX6SLL_PAD_AUD_TXFS__UART4_DTE_CTS 0x0188 0x0450 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_TXFS__SD3_LCTL 0x0188 0x0450 0x0000 0x4 0x0 +#define MX6SLL_PAD_AUD_TXFS__GPIO1_IO04 0x0188 0x0450 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_TXD__AUD3_TXD 0x018C 0x0454 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_TXD__ECSPI3_SCLK 0x018C 0x0454 0x0630 0x1 0x0 +#define MX6SLL_PAD_AUD_TXD__UART4_DCE_CTS 0x018C 0x0454 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_TXD__UART4_DTE_RTS 0x018C 0x0454 0x0758 0x2 0x1 +#define MX6SLL_PAD_AUD_TXD__GPIO1_IO05 0x018C 0x0454 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x0190 0x0458 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_MCLK__PWM4_OUT 0x0190 0x0458 0x0000 0x1 0x0 +#define MX6SLL_PAD_AUD_MCLK__ECSPI3_RDY 0x0190 0x0458 0x0634 0x2 0x0 +#define MX6SLL_PAD_AUD_MCLK__WDOG2_RESET_B_DEB 0x0190 0x0458 0x0000 0x4 0x0 +#define MX6SLL_PAD_AUD_MCLK__GPIO1_IO06 0x0190 0x0458 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_MCLK__SPDIF_EXT_CLK 0x0190 0x0458 0x073C 0x6 0x1 +#define MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x0194 0x045C 0x0744 0x0 0x0 +#define MX6SLL_PAD_UART1_RXD__UART1_DTE_TX 0x0194 0x045C 0x0000 0x0 0x0 +#define MX6SLL_PAD_UART1_RXD__PWM1_OUT 0x0194 0x045C 0x0000 0x1 0x0 +#define MX6SLL_PAD_UART1_RXD__UART4_DCE_RX 0x0194 0x045C 0x075C 0x2 0x4 +#define MX6SLL_PAD_UART1_RXD__UART4_DTE_TX 0x0194 0x045C 0x0000 0x2 0x0 +#define MX6SLL_PAD_UART1_RXD__UART5_DCE_RX 0x0194 0x045C 0x0764 0x4 0x6 +#define MX6SLL_PAD_UART1_RXD__UART5_DTE_TX 0x0194 0x045C 0x0000 0x4 0x0 +#define MX6SLL_PAD_UART1_RXD__GPIO3_IO16 0x0194 0x045C 0x0000 0x5 0x0 +#define MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x0198 0x0460 0x0000 0x0 0x0 +#define MX6SLL_PAD_UART1_TXD__UART1_DTE_RX 0x0198 0x0460 0x0744 0x0 0x1 +#define MX6SLL_PAD_UART1_TXD__PWM2_OUT 0x0198 0x0460 0x0000 0x1 0x0 +#define MX6SLL_PAD_UART1_TXD__UART4_DCE_TX 0x0198 0x0460 0x0000 0x2 0x0 +#define MX6SLL_PAD_UART1_TXD__UART4_DTE_RX 0x0198 0x0460 0x075C 0x2 0x5 +#define MX6SLL_PAD_UART1_TXD__UART5_DCE_TX 0x0198 0x0460 0x0000 0x4 0x0 +#define MX6SLL_PAD_UART1_TXD__UART5_DTE_RX 0x0198 0x0460 0x0764 0x4 0x7 +#define MX6SLL_PAD_UART1_TXD__GPIO3_IO17 0x0198 0x0460 0x0000 0x5 0x0 +#define MX6SLL_PAD_UART1_TXD__UART5_DCD_B 0x0198 0x0460 0x0000 0x7 0x0 +#define MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x019C 0x0464 0x067C 0x0 0x0 +#define MX6SLL_PAD_I2C1_SCL__UART1_DCE_RTS 0x019C 0x0464 0x0740 0x1 0x0 +#define MX6SLL_PAD_I2C1_SCL__UART1_DTE_CTS 0x019C 0x0464 0x0000 0x1 0x0 +#define MX6SLL_PAD_I2C1_SCL__ECSPI3_SS2 0x019C 0x0464 0x0640 0x2 0x0 +#define MX6SLL_PAD_I2C1_SCL__SD3_RESET 0x019C 0x0464 0x0000 0x4 0x0 +#define MX6SLL_PAD_I2C1_SCL__GPIO3_IO12 0x019C 0x0464 0x0000 0x5 0x0 +#define MX6SLL_PAD_I2C1_SCL__ECSPI1_SS1 0x019C 0x0464 0x060C 0x6 0x0 +#define MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x01A0 0x0468 0x0680 0x0 0x0 +#define MX6SLL_PAD_I2C1_SDA__UART1_DCE_CTS 0x01A0 0x0468 0x0000 0x1 0x0 +#define MX6SLL_PAD_I2C1_SDA__UART1_DTE_RTS 0x01A0 0x0468 0x0740 0x1 0x1 +#define MX6SLL_PAD_I2C1_SDA__ECSPI3_SS3 0x01A0 0x0468 0x0644 0x2 0x0 +#define MX6SLL_PAD_I2C1_SDA__SD3_VSELECT 0x01A0 0x0468 0x0000 0x4 0x0 +#define MX6SLL_PAD_I2C1_SDA__GPIO3_IO13 0x01A0 0x0468 0x0000 0x5 0x0 +#define MX6SLL_PAD_I2C1_SDA__ECSPI1_SS2 0x01A0 0x0468 0x0610 0x6 0x0 +#define MX6SLL_PAD_I2C2_SCL__I2C2_SCL 0x01A4 0x046C 0x0684 0x0 0x3 +#define MX6SLL_PAD_I2C2_SCL__AUD4_RXFS 0x01A4 0x046C 0x0570 0x1 0x2 +#define MX6SLL_PAD_I2C2_SCL__SPDIF_IN 0x01A4 0x046C 0x0738 0x2 0x2 +#define MX6SLL_PAD_I2C2_SCL__SD3_WP 0x01A4 0x046C 0x0794 0x4 0x3 +#define MX6SLL_PAD_I2C2_SCL__GPIO3_IO14 0x01A4 0x046C 0x0000 0x5 0x0 +#define MX6SLL_PAD_I2C2_SCL__ECSPI1_RDY 0x01A4 0x046C 0x0600 0x6 0x1 +#define MX6SLL_PAD_I2C2_SDA__I2C2_SDA 0x01A8 0x0470 0x0688 0x0 0x3 +#define MX6SLL_PAD_I2C2_SDA__AUD4_RXC 0x01A8 0x0470 0x056C 0x1 0x2 +#define MX6SLL_PAD_I2C2_SDA__SPDIF_OUT 0x01A8 0x0470 0x0000 0x2 0x0 +#define MX6SLL_PAD_I2C2_SDA__SD3_CD_B 0x01A8 0x0470 0x0780 0x4 0x3 +#define MX6SLL_PAD_I2C2_SDA__GPIO3_IO15 0x01A8 0x0470 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x01AC 0x0474 0x05FC 0x0 0x1 +#define MX6SLL_PAD_ECSPI1_SCLK__AUD4_TXD 0x01AC 0x0474 0x0568 0x1 0x1 +#define MX6SLL_PAD_ECSPI1_SCLK__UART5_DCE_RX 0x01AC 0x0474 0x0764 0x2 0x2 +#define MX6SLL_PAD_ECSPI1_SCLK__UART5_DTE_TX 0x01AC 0x0474 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI1_SCLK__EPDC_VCOM0 0x01AC 0x0474 0x0000 0x3 0x0 +#define MX6SLL_PAD_ECSPI1_SCLK__SD2_RESET 0x01AC 0x0474 0x0000 0x4 0x0 +#define MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08 0x01AC 0x0474 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI1_SCLK__USB_OTG2_OC 0x01AC 0x0474 0x0768 0x6 0x1 +#define MX6SLL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x01B0 0x0478 0x0608 0x0 0x1 +#define MX6SLL_PAD_ECSPI1_MOSI__AUD4_TXC 0x01B0 0x0478 0x0574 0x1 0x1 +#define MX6SLL_PAD_ECSPI1_MOSI__UART5_DCE_TX 0x01B0 0x0478 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI1_MOSI__UART5_DTE_RX 0x01B0 0x0478 0x0764 0x2 0x3 +#define MX6SLL_PAD_ECSPI1_MOSI__EPDC_VCOM1 0x01B0 0x0478 0x0000 0x3 0x0 +#define MX6SLL_PAD_ECSPI1_MOSI__SD2_VSELECT 0x01B0 0x0478 0x0000 0x4 0x0 +#define MX6SLL_PAD_ECSPI1_MOSI__GPIO4_IO09 0x01B0 0x0478 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x01B4 0x047C 0x0604 0x0 0x1 +#define MX6SLL_PAD_ECSPI1_MISO__AUD4_TXFS 0x01B4 0x047C 0x0578 0x1 0x1 +#define MX6SLL_PAD_ECSPI1_MISO__UART5_DCE_RTS 0x01B4 0x047C 0x0760 0x2 0x2 +#define MX6SLL_PAD_ECSPI1_MISO__UART5_DTE_CTS 0x01B4 0x047C 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI1_MISO__EPDC_BDR0 0x01B4 0x047C 0x0000 0x3 0x0 +#define MX6SLL_PAD_ECSPI1_MISO__SD2_WP 0x01B4 0x047C 0x077C 0x4 0x0 +#define MX6SLL_PAD_ECSPI1_MISO__GPIO4_IO10 0x01B4 0x047C 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI1_SS0__ECSPI1_SS0 0x01B8 0x0480 0x0614 0x0 0x1 +#define MX6SLL_PAD_ECSPI1_SS0__AUD4_RXD 0x01B8 0x0480 0x0564 0x1 0x1 +#define MX6SLL_PAD_ECSPI1_SS0__UART5_DCE_CTS 0x01B8 0x0480 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI1_SS0__UART5_DTE_RTS 0x01B8 0x0480 0x0760 0x2 0x3 +#define MX6SLL_PAD_ECSPI1_SS0__EPDC_BDR1 0x01B8 0x0480 0x0000 0x3 0x0 +#define MX6SLL_PAD_ECSPI1_SS0__SD2_CD_B 0x01B8 0x0480 0x0778 0x4 0x0 +#define MX6SLL_PAD_ECSPI1_SS0__GPIO4_IO11 0x01B8 0x0480 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI1_SS0__USB_OTG2_PWR 0x01B8 0x0480 0x0000 0x6 0x0 +#define MX6SLL_PAD_ECSPI2_SCLK__ECSPI2_SCLK 0x01BC 0x0484 0x061C 0x0 0x1 +#define MX6SLL_PAD_ECSPI2_SCLK__SPDIF_EXT_CLK 0x01BC 0x0484 0x073C 0x1 0x2 +#define MX6SLL_PAD_ECSPI2_SCLK__UART3_DCE_RX 0x01BC 0x0484 0x0754 0x2 0x2 +#define MX6SLL_PAD_ECSPI2_SCLK__UART3_DTE_TX 0x01BC 0x0484 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI2_SCLK__CSI_PIXCLK 0x01BC 0x0484 0x05F4 0x3 0x1 +#define MX6SLL_PAD_ECSPI2_SCLK__SD1_RESET 0x01BC 0x0484 0x0000 0x4 0x0 +#define MX6SLL_PAD_ECSPI2_SCLK__GPIO4_IO12 0x01BC 0x0484 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI2_SCLK__USB_OTG2_OC 0x01BC 0x0484 0x0768 0x6 0x2 +#define MX6SLL_PAD_ECSPI2_MOSI__ECSPI2_MOSI 0x01C0 0x0488 0x0624 0x0 0x1 +#define MX6SLL_PAD_ECSPI2_MOSI__SDMA_EXT_EVENT1 0x01C0 0x0488 0x0000 0x1 0x0 +#define MX6SLL_PAD_ECSPI2_MOSI__UART3_DCE_TX 0x01C0 0x0488 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI2_MOSI__UART3_DTE_RX 0x01C0 0x0488 0x0754 0x2 0x3 +#define MX6SLL_PAD_ECSPI2_MOSI__CSI_HSYNC 0x01C0 0x0488 0x05F0 0x3 0x1 +#define MX6SLL_PAD_ECSPI2_MOSI__SD1_VSELECT 0x01C0 0x0488 0x0000 0x4 0x0 +#define MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x01C0 0x0488 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__ECSPI2_MISO 0x01C4 0x048C 0x0620 0x0 0x1 +#define MX6SLL_PAD_ECSPI2_MISO__SDMA_EXT_EVENT0 0x01C4 0x048C 0x0000 0x1 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__UART3_DCE_RTS 0x01C4 0x048C 0x0750 0x2 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__UART3_DTE_CTS 0x01C4 0x048C 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__CSI_MCLK 0x01C4 0x048C 0x0000 0x3 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__SD1_WP 0x01C4 0x048C 0x0774 0x4 0x2 +#define MX6SLL_PAD_ECSPI2_MISO__GPIO4_IO14 0x01C4 0x048C 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__USB_OTG1_OC 0x01C4 0x048C 0x076C 0x6 0x1 +#define MX6SLL_PAD_ECSPI2_SS0__ECSPI2_SS0 0x01C8 0x0490 0x0628 0x0 0x0 +#define MX6SLL_PAD_ECSPI2_SS0__ECSPI1_SS3 0x01C8 0x0490 0x0618 0x1 0x1 +#define MX6SLL_PAD_ECSPI2_SS0__UART3_DCE_CTS 0x01C8 0x0490 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI2_SS0__UART3_DTE_RTS 0x01C8 0x0490 0x0750 0x2 0x1 +#define MX6SLL_PAD_ECSPI2_SS0__CSI_VSYNC 0x01C8 0x0490 0x05F8 0x3 0x1 +#define MX6SLL_PAD_ECSPI2_SS0__SD1_CD_B 0x01C8 0x0490 0x0770 0x4 0x2 +#define MX6SLL_PAD_ECSPI2_SS0__GPIO4_IO15 0x01C8 0x0490 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI2_SS0__USB_OTG1_PWR 0x01C8 0x0490 0x0000 0x6 0x0 +#define MX6SLL_PAD_SD1_CLK__SD1_CLK 0x01CC 0x0494 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_CLK__KEY_COL0 0x01CC 0x0494 0x06A0 0x2 0x2 +#define MX6SLL_PAD_SD1_CLK__EPDC_SDCE4 0x01CC 0x0494 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_CLK__GPIO5_IO15 0x01CC 0x0494 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_CMD__SD1_CMD 0x01D0 0x0498 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_CMD__KEY_ROW0 0x01D0 0x0498 0x06C0 0x2 0x2 +#define MX6SLL_PAD_SD1_CMD__EPDC_SDCE5 0x01D0 0x0498 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_CMD__GPIO5_IO14 0x01D0 0x0498 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x01D4 0x049C 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA0__KEY_COL1 0x01D4 0x049C 0x06A4 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA0__EPDC_SDCE6 0x01D4 0x049C 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA0__GPIO5_IO11 0x01D4 0x049C 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x01D8 0x04A0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA1__KEY_ROW1 0x01D8 0x04A0 0x06C4 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA1__EPDC_SDCE7 0x01D8 0x04A0 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA1__GPIO5_IO08 0x01D8 0x04A0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x01DC 0x04A4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA2__KEY_COL2 0x01DC 0x04A4 0x06A8 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA2__EPDC_SDCE8 0x01DC 0x04A4 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA2__GPIO5_IO13 0x01DC 0x04A4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x01E0 0x04A8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA3__KEY_ROW2 0x01E0 0x04A8 0x06C8 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA3__EPDC_SDCE9 0x01E0 0x04A8 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA3__GPIO5_IO06 0x01E0 0x04A8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA4__SD1_DATA4 0x01E4 0x04AC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA4__KEY_COL3 0x01E4 0x04AC 0x06AC 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA4__EPDC_SDCLK_N 0x01E4 0x04AC 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA4__UART4_DCE_RX 0x01E4 0x04AC 0x075C 0x4 0x6 +#define MX6SLL_PAD_SD1_DATA4__UART4_DTE_TX 0x01E4 0x04AC 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD1_DATA4__GPIO5_IO12 0x01E4 0x04AC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA5__SD1_DATA5 0x01E8 0x04B0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA5__KEY_ROW3 0x01E8 0x04B0 0x06CC 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA5__EPDC_SDOED 0x01E8 0x04B0 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA5__UART4_DCE_TX 0x01E8 0x04B0 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD1_DATA5__UART4_DTE_RX 0x01E8 0x04B0 0x075C 0x4 0x7 +#define MX6SLL_PAD_SD1_DATA5__GPIO5_IO09 0x01E8 0x04B0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA6__SD1_DATA6 0x01EC 0x04B4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA6__KEY_COL4 0x01EC 0x04B4 0x06B0 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA6__EPDC_SDOEZ 0x01EC 0x04B4 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA6__UART4_DCE_RTS 0x01EC 0x04B4 0x0758 0x4 0x4 +#define MX6SLL_PAD_SD1_DATA6__UART4_DTE_CTS 0x01EC 0x04B4 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD1_DATA6__GPIO5_IO07 0x01EC 0x04B4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA7__SD1_DATA7 0x01F0 0x04B8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA7__KEY_ROW4 0x01F0 0x04B8 0x06D0 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA7__CCM_PMIC_READY 0x01F0 0x04B8 0x05AC 0x3 0x3 +#define MX6SLL_PAD_SD1_DATA7__UART4_DCE_CTS 0x01F0 0x04B8 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD1_DATA7__UART4_DTE_RTS 0x01F0 0x04B8 0x0758 0x4 0x5 +#define MX6SLL_PAD_SD1_DATA7__GPIO5_IO10 0x01F0 0x04B8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_RESET__SD2_RESET 0x01F4 0x04BC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_RESET__WDOG2_B 0x01F4 0x04BC 0x0000 0x2 0x0 +#define MX6SLL_PAD_SD2_RESET__SPDIF_OUT 0x01F4 0x04BC 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD2_RESET__CSI_MCLK 0x01F4 0x04BC 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_RESET__GPIO4_IO27 0x01F4 0x04BC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_CLK__SD2_CLK 0x01F8 0x04C0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_CLK__AUD4_RXFS 0x01F8 0x04C0 0x0570 0x1 0x1 +#define MX6SLL_PAD_SD2_CLK__ECSPI3_SCLK 0x01F8 0x04C0 0x0630 0x2 0x1 +#define MX6SLL_PAD_SD2_CLK__CSI_DATA00 0x01F8 0x04C0 0x05C8 0x3 0x1 +#define MX6SLL_PAD_SD2_CLK__GPIO5_IO05 0x01F8 0x04C0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_CMD__SD2_CMD 0x01FC 0x04C4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_CMD__AUD4_RXC 0x01FC 0x04C4 0x056C 0x1 0x1 +#define MX6SLL_PAD_SD2_CMD__ECSPI3_SS0 0x01FC 0x04C4 0x0648 0x2 0x1 +#define MX6SLL_PAD_SD2_CMD__CSI_DATA01 0x01FC 0x04C4 0x05CC 0x3 0x1 +#define MX6SLL_PAD_SD2_CMD__EPIT1_OUT 0x01FC 0x04C4 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_CMD__GPIO5_IO04 0x01FC 0x04C4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x0200 0x04C8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA0__AUD4_RXD 0x0200 0x04C8 0x0564 0x1 0x2 +#define MX6SLL_PAD_SD2_DATA0__ECSPI3_MOSI 0x0200 0x04C8 0x063C 0x2 0x1 +#define MX6SLL_PAD_SD2_DATA0__CSI_DATA02 0x0200 0x04C8 0x05D0 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA0__UART5_DCE_RTS 0x0200 0x04C8 0x0760 0x4 0x4 +#define MX6SLL_PAD_SD2_DATA0__UART5_DTE_CTS 0x0200 0x04C8 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_DATA0__GPIO5_IO01 0x0200 0x04C8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x0204 0x04CC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA1__AUD4_TXC 0x0204 0x04CC 0x0574 0x1 0x2 +#define MX6SLL_PAD_SD2_DATA1__ECSPI3_MISO 0x0204 0x04CC 0x0638 0x2 0x1 +#define MX6SLL_PAD_SD2_DATA1__CSI_DATA03 0x0204 0x04CC 0x05D4 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA1__UART5_DCE_CTS 0x0204 0x04CC 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_DATA1__UART5_DTE_RTS 0x0204 0x04CC 0x0760 0x4 0x5 +#define MX6SLL_PAD_SD2_DATA1__GPIO4_IO30 0x0204 0x04CC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x0208 0x04D0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA2__AUD4_TXFS 0x0208 0x04D0 0x0578 0x1 0x2 +#define MX6SLL_PAD_SD2_DATA2__CSI_DATA04 0x0208 0x04D0 0x05D8 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA2__UART5_DCE_RX 0x0208 0x04D0 0x0764 0x4 0x4 +#define MX6SLL_PAD_SD2_DATA2__UART5_DTE_TX 0x0208 0x04D0 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_DATA2__GPIO5_IO03 0x0208 0x04D0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x020C 0x04D4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA3__AUD4_TXD 0x020C 0x04D4 0x0568 0x1 0x2 +#define MX6SLL_PAD_SD2_DATA3__CSI_DATA05 0x020C 0x04D4 0x05DC 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA3__UART5_DCE_TX 0x020C 0x04D4 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_DATA3__UART5_DTE_RX 0x020C 0x04D4 0x0764 0x4 0x5 +#define MX6SLL_PAD_SD2_DATA3__GPIO4_IO28 0x020C 0x04D4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA4__SD2_DATA4 0x0210 0x04D8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA4__SD3_DATA4 0x0210 0x04D8 0x0784 0x1 0x1 +#define MX6SLL_PAD_SD2_DATA4__UART2_DCE_RX 0x0210 0x04D8 0x074C 0x2 0x2 +#define MX6SLL_PAD_SD2_DATA4__UART2_DTE_TX 0x0210 0x04D8 0x0000 0x2 0x0 +#define MX6SLL_PAD_SD2_DATA4__CSI_DATA06 0x0210 0x04D8 0x05E0 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA4__SPDIF_OUT 0x0210 0x04D8 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_DATA4__GPIO5_IO02 0x0210 0x04D8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA5__SD2_DATA5 0x0214 0x04DC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA5__SD3_DATA5 0x0214 0x04DC 0x0788 0x1 0x1 +#define MX6SLL_PAD_SD2_DATA5__UART2_DCE_TX 0x0214 0x04DC 0x0000 0x2 0x0 +#define MX6SLL_PAD_SD2_DATA5__UART2_DTE_RX 0x0214 0x04DC 0x074C 0x2 0x3 +#define MX6SLL_PAD_SD2_DATA5__CSI_DATA07 0x0214 0x04DC 0x05E4 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA5__SPDIF_IN 0x0214 0x04DC 0x0738 0x4 0x1 +#define MX6SLL_PAD_SD2_DATA5__GPIO4_IO31 0x0214 0x04DC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA6__SD2_DATA6 0x0218 0x04E0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA6__SD3_DATA6 0x0218 0x04E0 0x078C 0x1 0x1 +#define MX6SLL_PAD_SD2_DATA6__UART2_DCE_RTS 0x0218 0x04E0 0x0748 0x2 0x2 +#define MX6SLL_PAD_SD2_DATA6__UART2_DTE_CTS 0x0218 0x04E0 0x0000 0x2 0x0 +#define MX6SLL_PAD_SD2_DATA6__CSI_DATA08 0x0218 0x04E0 0x05E8 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA6__SD2_WP 0x0218 0x04E0 0x077C 0x4 0x1 +#define MX6SLL_PAD_SD2_DATA6__GPIO4_IO29 0x0218 0x04E0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA7__SD2_DATA7 0x021C 0x04E4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA7__SD3_DATA7 0x021C 0x04E4 0x0790 0x1 0x1 +#define MX6SLL_PAD_SD2_DATA7__UART2_DCE_CTS 0x021C 0x04E4 0x0000 0x2 0x0 +#define MX6SLL_PAD_SD2_DATA7__UART2_DTE_RTS 0x021C 0x04E4 0x0748 0x2 0x3 +#define MX6SLL_PAD_SD2_DATA7__CSI_DATA09 0x021C 0x04E4 0x05EC 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA7__SD2_CD_B 0x021C 0x04E4 0x0778 0x4 0x1 +#define MX6SLL_PAD_SD2_DATA7__GPIO5_IO00 0x021C 0x04E4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_CLK__SD3_CLK 0x0220 0x04E8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_CLK__AUD5_RXFS 0x0220 0x04E8 0x0588 0x1 0x0 +#define MX6SLL_PAD_SD3_CLK__KEY_COL5 0x0220 0x04E8 0x0694 0x2 0x0 +#define MX6SLL_PAD_SD3_CLK__CSI_DATA10 0x0220 0x04E8 0x05B0 0x3 0x0 +#define MX6SLL_PAD_SD3_CLK__WDOG1_RESET_B_DEB 0x0220 0x04E8 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD3_CLK__GPIO5_IO18 0x0220 0x04E8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_CLK__USB_OTG1_PWR 0x0220 0x04E8 0x0000 0x6 0x0 +#define MX6SLL_PAD_SD3_CMD__SD3_CMD 0x0224 0x04EC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_CMD__AUD5_RXC 0x0224 0x04EC 0x0584 0x1 0x0 +#define MX6SLL_PAD_SD3_CMD__KEY_ROW5 0x0224 0x04EC 0x06B4 0x2 0x0 +#define MX6SLL_PAD_SD3_CMD__CSI_DATA11 0x0224 0x04EC 0x05B4 0x3 0x0 +#define MX6SLL_PAD_SD3_CMD__USB_OTG2_ID 0x0224 0x04EC 0x0560 0x4 0x1 +#define MX6SLL_PAD_SD3_CMD__GPIO5_IO21 0x0224 0x04EC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_CMD__USB_OTG2_PWR 0x0224 0x04EC 0x0000 0x6 0x0 +#define MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x0228 0x04F0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_DATA0__AUD5_RXD 0x0228 0x04F0 0x057C 0x1 0x0 +#define MX6SLL_PAD_SD3_DATA0__KEY_COL6 0x0228 0x04F0 0x0698 0x2 0x0 +#define MX6SLL_PAD_SD3_DATA0__CSI_DATA12 0x0228 0x04F0 0x05B8 0x3 0x0 +#define MX6SLL_PAD_SD3_DATA0__USB_OTG1_ID 0x0228 0x04F0 0x055C 0x4 0x1 +#define MX6SLL_PAD_SD3_DATA0__GPIO5_IO19 0x0228 0x04F0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x022C 0x04F4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_DATA1__AUD5_TXC 0x022C 0x04F4 0x058C 0x1 0x0 +#define MX6SLL_PAD_SD3_DATA1__KEY_ROW6 0x022C 0x04F4 0x06B8 0x2 0x0 +#define MX6SLL_PAD_SD3_DATA1__CSI_DATA13 0x022C 0x04F4 0x05BC 0x3 0x0 +#define MX6SLL_PAD_SD3_DATA1__SD1_VSELECT 0x022C 0x04F4 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD3_DATA1__GPIO5_IO20 0x022C 0x04F4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_DATA1__JTAG_DE_B 0x022C 0x04F4 0x0000 0x6 0x0 +#define MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x0230 0x04F8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_DATA2__AUD5_TXFS 0x0230 0x04F8 0x0590 0x1 0x0 +#define MX6SLL_PAD_SD3_DATA2__KEY_COL7 0x0230 0x04F8 0x069C 0x2 0x0 +#define MX6SLL_PAD_SD3_DATA2__CSI_DATA14 0x0230 0x04F8 0x05C0 0x3 0x0 +#define MX6SLL_PAD_SD3_DATA2__EPIT1_OUT 0x0230 0x04F8 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD3_DATA2__GPIO5_IO16 0x0230 0x04F8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_DATA2__USB_OTG2_OC 0x0230 0x04F8 0x0768 0x6 0x0 +#define MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x0234 0x04FC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_DATA3__AUD5_TXD 0x0234 0x04FC 0x0580 0x1 0x0 +#define MX6SLL_PAD_SD3_DATA3__KEY_ROW7 0x0234 0x04FC 0x06BC 0x2 0x0 +#define MX6SLL_PAD_SD3_DATA3__CSI_DATA15 0x0234 0x04FC 0x05C4 0x3 0x0 +#define MX6SLL_PAD_SD3_DATA3__EPIT2_OUT 0x0234 0x04FC 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD3_DATA3__GPIO5_IO17 0x0234 0x04FC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_DATA3__USB_OTG1_OC 0x0234 0x04FC 0x076C 0x6 0x0 +#define MX6SLL_PAD_GPIO4_IO20__SD1_STROBE 0x0238 0x0500 0x0000 0x0 0x0 +#define MX6SLL_PAD_GPIO4_IO20__AUD6_RXFS 0x0238 0x0500 0x05A0 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO20__ECSPI4_SS0 0x0238 0x0500 0x065C 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO20__GPT_CAPTURE1 0x0238 0x0500 0x0670 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO20__GPIO4_IO20 0x0238 0x0500 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO21__SD2_STROBE 0x023C 0x0504 0x0000 0x0 0x0 +#define MX6SLL_PAD_GPIO4_IO21__AUD6_RXC 0x023C 0x0504 0x059C 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO21__ECSPI4_SCLK 0x023C 0x0504 0x0650 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO21__GPT_CAPTURE2 0x023C 0x0504 0x0674 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO21__GPIO4_IO21 0x023C 0x0504 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO19__SD3_STROBE 0x0240 0x0508 0x0000 0x0 0x0 +#define MX6SLL_PAD_GPIO4_IO19__AUD6_RXD 0x0240 0x0508 0x0594 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO19__ECSPI4_MOSI 0x0240 0x0508 0x0658 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO19__GPT_COMPARE1 0x0240 0x0508 0x0000 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO19__GPIO4_IO19 0x0240 0x0508 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO25__AUD6_TXC 0x0244 0x050C 0x05A4 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO25__ECSPI4_MISO 0x0244 0x050C 0x0654 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO25__GPT_COMPARE2 0x0244 0x050C 0x0000 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO25__GPIO4_IO25 0x0244 0x050C 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO18__AUD6_TXFS 0x0248 0x0510 0x05A8 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO18__ECSPI4_SS1 0x0248 0x0510 0x0660 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO18__GPT_COMPARE3 0x0248 0x0510 0x0000 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO18__GPIO4_IO18 0x0248 0x0510 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO24__AUD6_TXD 0x024C 0x0514 0x0598 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO24__ECSPI4_SS2 0x024C 0x0514 0x0664 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO24__GPT_CLKIN 0x024C 0x0514 0x0678 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24 0x024C 0x0514 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO23__AUDIO_CLK_OUT 0x0250 0x0518 0x0000 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO23__SD1_RESET 0x0250 0x0518 0x0000 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO23__SD3_RESET 0x0250 0x0518 0x0000 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO23__GPIO4_IO23 0x0250 0x0518 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO17__USB_OTG1_ID 0x0254 0x051C 0x055C 0x2 0x2 +#define MX6SLL_PAD_GPIO4_IO17__SD1_VSELECT 0x0254 0x051C 0x0000 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO17__SD3_VSELECT 0x0254 0x051C 0x0000 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO17__GPIO4_IO17 0x0254 0x051C 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO22__SPDIF_IN 0x0258 0x0520 0x0738 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO22__SD1_WP 0x0258 0x0520 0x0774 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO22__SD3_WP 0x0258 0x0520 0x0794 0x4 0x1 +#define MX6SLL_PAD_GPIO4_IO22__GPIO4_IO22 0x0258 0x0520 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO16__SPDIF_OUT 0x025C 0x0524 0x0000 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO16__SD1_CD_B 0x025C 0x0524 0x0770 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO16__SD3_CD_B 0x025C 0x0524 0x0780 0x4 0x1 +#define MX6SLL_PAD_GPIO4_IO16__GPIO4_IO16 0x025C 0x0524 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO26__WDOG1_B 0x0260 0x0528 0x0000 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO26__PWM4_OUT 0x0260 0x0528 0x0000 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO26__CCM_PMIC_READY 0x0260 0x0528 0x05AC 0x4 0x1 +#define MX6SLL_PAD_GPIO4_IO26__GPIO4_IO26 0x0260 0x0528 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO26__SPDIF_EXT_CLK 0x0260 0x0528 0x073C 0x6 0x0 + +#endif /* __DTS_IMX6SLL_PINFUNC_H */ diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi new file mode 100644 index 000000000000..000e6136a9d6 --- /dev/null +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -0,0 +1,780 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP. + * + */ + +#include <dt-bindings/clock/imx6sll-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "imx6sll-pinfunc.h" + +/ { + #address-cells = <1>; + #size-cells = <1>; + + aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi3 = &ecspi3; + spi4 = &ecspi4; + usbphy0 = &usbphy1; + usbphy1 = &usbphy2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 996000 1275000 + 792000 1175000 + 396000 1075000 + 198000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 996000 1175000 + 792000 1175000 + 396000 1175000 + 198000 1175000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clks IMX6SLL_CLK_ARM>, + <&clks IMX6SLL_CLK_PLL2_PFD2>, + <&clks IMX6SLL_CLK_STEP>, + <&clks IMX6SLL_CLK_PLL1_SW>, + <&clks IMX6SLL_CLK_PLL1_SYS>; + clock-names = "arm", "pll2_pfd2_396m", "step", + "pll1_sw", "pll1_sys"; + }; + }; + + intc: interrupt-controller@a01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00a01000 0x1000>, + <0x00a00100 0x100>; + interrupt-parent = <&intc>; + }; + + ckil: clock-ckil { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "ckil"; + }; + + osc: clock-osc-24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc"; + }; + + ipp_di0: clock-ipp-di0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di0"; + }; + + ipp_di1: clock-ipp-di1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di1"; + }; + + tempmon: temperature-sensor { + compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon"; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gpc>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gpc>; + ranges; + + ocram: sram@900000 { + compatible = "mmio-sram"; + reg = <0x00900000 0x20000>; + }; + + L2: l2-cache@a02000 { + compatible = "arm,pl310-cache"; + reg = <0x00a02000 0x1000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + cache-unified; + cache-level = <2>; + arm,tag-latency = <4 2 3>; + arm,data-latency = <4 2 3>; + }; + + aips1: aips-bus@2000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x100000>; + ranges; + + spba: spba-bus@2000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x40000>; + ranges; + + spdif: spdif@2004000 { + compatible = "fsl,imx6sl-spdif", "fsl,imx35-spdif"; + reg = <0x02004000 0x4000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 14 18 0>, <&sdma 15 18 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_SPDIF_GCLK>, + <&clks IMX6SLL_CLK_OSC>, + <&clks IMX6SLL_CLK_SPDIF>, + <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_IPG>, + <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_SPBA>; + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7", "dma"; + status = "disabled"; + }; + + ecspi1: spi@2008000 { + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x02008000 0x4000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 3 7 1>, <&sdma 4 7 2>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_ECSPI1>, + <&clks IMX6SLL_CLK_ECSPI1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi2: spi@200c000 { + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x0200c000 0x4000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 5 7 1>, <&sdma 6 7 2>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_ECSPI2>, + <&clks IMX6SLL_CLK_ECSPI2>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi3: spi@2010000 { + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x02010000 0x4000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 7 7 1>, <&sdma 8 7 2>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_ECSPI3>, + <&clks IMX6SLL_CLK_ECSPI3>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi4: spi@2014000 { + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x02014000 0x4000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 9 7 1>, <&sdma 10 7 2>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_ECSPI4>, + <&clks IMX6SLL_CLK_ECSPI4>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart4: serial@2018000 { + compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", + "fsl,imx21-uart"; + reg = <0x02018000 0x4000>; + interrupts =<GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 31 4 0>, <&sdma 32 4 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_UART4_IPG>, + <&clks IMX6SLL_CLK_UART4_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart1: serial@2020000 { + compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", + "fsl,imx21-uart"; + reg = <0x02020000 0x4000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 25 4 0>, <&sdma 26 4 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_UART1_IPG>, + <&clks IMX6SLL_CLK_UART1_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart2: serial@2024000 { + compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", + "fsl,imx21-uart"; + reg = <0x02024000 0x4000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 27 4 0>, <&sdma 28 4 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_UART2_IPG>, + <&clks IMX6SLL_CLK_UART2_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ssi1: ssi-controller@2028000 { + compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; + reg = <0x02028000 0x4000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 37 22 0>, <&sdma 38 22 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; + clocks = <&clks IMX6SLL_CLK_SSI1_IPG>, + <&clks IMX6SLL_CLK_SSI1>; + clock-names = "ipg", "baud"; + status = "disabled"; + }; + + ssi2: ssi-controller@202c000 { + compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; + reg = <0x0202c000 0x4000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 41 22 0>, <&sdma 42 22 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; + clocks = <&clks IMX6SLL_CLK_SSI2_IPG>, + <&clks IMX6SLL_CLK_SSI2>; + clock-names = "ipg", "baud"; + status = "disabled"; + }; + + ssi3: ssi-controller@2030000 { + compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; + reg = <0x02030000 0x4000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 45 22 0>, <&sdma 46 22 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; + clocks = <&clks IMX6SLL_CLK_SSI3_IPG>, + <&clks IMX6SLL_CLK_SSI3>; + clock-names = "ipg", "baud"; + status = "disabled"; + }; + + uart3: serial@2034000 { + compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", + "fsl,imx21-uart"; + reg = <0x02034000 0x4000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 29 4 0>, <&sdma 30 4 0>; + dma-name = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_UART3_IPG>, + <&clks IMX6SLL_CLK_UART3_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + }; + + pwm1: pwm@2080000 { + compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; + reg = <0x02080000 0x4000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_PWM1>, + <&clks IMX6SLL_CLK_PWM1>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm2: pwm@2084000 { + compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; + reg = <0x02084000 0x4000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_PWM2>, + <&clks IMX6SLL_CLK_PWM2>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm3: pwm@2088000 { + compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; + reg = <0x02088000 0x4000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_PWM3>, + <&clks IMX6SLL_CLK_PWM3>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm4: pwm@208c000 { + compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; + reg = <0x0208c000 0x4000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_PWM4>, + <&clks IMX6SLL_CLK_PWM4>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + gpt1: timer@2098000 { + compatible = "fsl,imx6sl-gpt"; + reg = <0x02098000 0x4000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_GPT_BUS>, + <&clks IMX6SLL_CLK_GPT_SERIAL>; + clock-names = "ipg", "per"; + }; + + gpio1: gpio@209c000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x0209c000 0x4000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@20a0000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x020a0000 0x4000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@20a4000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x020a4000 0x4000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@20a8000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x020a8000 0x4000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@20ac000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x020ac000 0x4000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio6: gpio@20b0000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x020b0000 0x4000>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + kpp: keypad@20b8000 { + compatible = "fsl,imx6sll-kpp", "fsl,imx21-kpp"; + reg = <0x020b8000 0x4000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_KPP>; + status = "disabled"; + }; + + wdog1: watchdog@20bc000 { + compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt"; + reg = <0x020bc000 0x4000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_WDOG1>; + }; + + wdog2: watchdog@20c0000 { + compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt"; + reg = <0x020c0000 0x4000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_WDOG2>; + status = "disabled"; + }; + + clks: clock-controller@20c4000 { + compatible = "fsl,imx6sll-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; + + assigned-clocks = <&clks IMX6SLL_CLK_PERCLK_SEL>; + assigned-clock-parents = <&clks IMX6SLL_CLK_OSC>; + }; + + anatop: anatop@20c8000 { + compatible = "fsl,imx6sll-anatop", + "fsl,imx6q-anatop", + "syscon", "simple-bus"; + reg = <0x020c8000 0x4000>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + reg_3p0: regulator-3p0@20c8120 { + compatible = "fsl,anatop-regulator"; + reg = <0x20c8120>; + regulator-name = "vdd3p0"; + regulator-min-microvolt = <2625000>; + regulator-max-microvolt = <3400000>; + anatop-reg-offset = <0x120>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2625000>; + anatop-max-voltage = <3400000>; + anatop-enable-bit = <0>; + }; + }; + + usbphy1: usb-phy@20c9000 { + compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy", + "fsl,imx23-usbphy"; + reg = <0x020c9000 0x1000>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USBPHY1>; + phy-3p0-supply = <®_3p0>; + fsl,anatop = <&anatop>; + }; + + usbphy2: usb-phy@20ca000 { + compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy", + "fsl,imx23-usbphy"; + reg = <0x020ca000 0x1000>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USBPHY2>; + phy-reg_3p0-supply = <®_3p0>; + fsl,anatop = <&anatop>; + }; + + snvs: snvs@20cc000 { + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; + reg = <0x020cc000 0x4000>; + + snvs_rtc: snvs-rtc-lp { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + regmap = <&snvs>; + offset = <0x34>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + }; + + snvs_poweroff: snvs-poweroff { + compatible = "syscon-poweroff"; + regmap = <&snvs>; + offset = <0x38>; + mask = <0x61>; + }; + + snvs_pwrkey: snvs-powerkey { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&snvs>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + linux,keycode = <KEY_POWER>; + wakeup-source; + }; + }; + + src: reset-controller@20d8000 { + compatible = "fsl,imx6sll-src", "fsl,imx51-src"; + reg = <0x020d8000 0x4000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + #reset-cells = <1>; + }; + + gpc: interrupt-controller@20dc000 { + compatible = "fsl,imx6sll-gpc", "fsl,imx6q-gpc"; + reg = <0x020dc000 0x4000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&intc>; + fsl,mf-mix-wakeup-irq = <0x7c00000 0x7d00 0x0 0x1400640>; + }; + + iomuxc: pinctrl@20e0000 { + compatible = "fsl,imx6sll-iomuxc"; + reg = <0x020e0000 0x4000>; + }; + + gpr: iomuxc-gpr@20e4000 { + compatible = "fsl,imx6sll-iomuxc-gpr", + "fsl,imx6q-iomuxc-gpr", "syscon"; + reg = <0x020e4000 0x4000>; + }; + + csi: csi@20e8000 { + compatible = "fsl,imx6sll-csi", "fsl,imx6s-csi"; + reg = <0x020e8000 0x4000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_CSI>, + <&clks IMX6SLL_CLK_DUMMY>; + clock-names = "disp-axi", "csi_mclk", "disp_dcic"; + status = "disabled"; + }; + + sdma: dma-controller@20ec000 { + compatible = "fsl,imx6sll-sdma", "fsl,imx35-sdma"; + reg = <0x020ec000 0x4000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_SDMA>, + <&clks IMX6SLL_CLK_SDMA>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + iram = <&ocram>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; + }; + + lcdif: lcd-controller@20f8000 { + compatible = "fsl,imx6sll-lcdif", "fsl,imx28-lcdif"; + reg = <0x020f8000 0x4000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_LCDIF_PIX>, + <&clks IMX6SLL_CLK_LCDIF_APB>, + <&clks IMX6SLL_CLK_DUMMY>; + clock-names = "pix", "axi", "disp_axi"; + status = "disabled"; + }; + + dcp: dcp@20fc000 { + compatible = "fsl,imx28-dcp"; + reg = <0x020fc000 0x4000>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_DCP>; + clock-names = "dcp"; + }; + }; + + aips2: aips-bus@2100000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02100000 0x100000>; + ranges; + + usbotg1: usb@2184000 { + compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb", + "fsl,imx27-usb"; + reg = <0x02184000 0x200>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USBOH3>; + fsl,usbphy = <&usbphy1>; + fsl,usbmisc = <&usbmisc 0>; + fsl,anatop = <&anatop>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + status = "disabled"; + }; + + usbotg2: usb@2184200 { + compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb", + "fsl,imx27-usb"; + reg = <0x02184200 0x200>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USBOH3>; + fsl,usbphy = <&usbphy2>; + fsl,usbmisc = <&usbmisc 1>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + status = "disabled"; + }; + + usbmisc: usbmisc@2184800 { + #index-cells = <1>; + compatible = "fsl,imx6sll-usbmisc", "fsl,imx6ul-usbmisc", + "fsl,imx6q-usbmisc"; + reg = <0x02184800 0x200>; + }; + + usdhc1: mmc@2190000 { + compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x02190000 0x4000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USDHC1>, + <&clks IMX6SLL_CLK_USDHC1>, + <&clks IMX6SLL_CLK_USDHC1>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-step = <2>; + fsl,tuning-start-tap = <20>; + status = "disabled"; + }; + + usdhc2: mmc@2194000 { + compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x02194000 0x4000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USDHC2>, + <&clks IMX6SLL_CLK_USDHC2>, + <&clks IMX6SLL_CLK_USDHC2>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-step = <2>; + fsl,tuning-start-tap = <20>; + status = "disabled"; + }; + + usdhc3: mmc@2198000 { + compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x02198000 0x4000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USDHC3>, + <&clks IMX6SLL_CLK_USDHC3>, + <&clks IMX6SLL_CLK_USDHC3>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-step = <2>; + fsl,tuning-start-tap = <20>; + status = "disabled"; + }; + + i2c1: i2c@21a0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fs,imx6sll-i2c", "fsl,imx21-i2c"; + reg = <0x021a0000 0x4000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_I2C1>; + status = "disabled"; + }; + + i2c2: i2c@21a4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c"; + reg = <0x021a4000 0x4000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_I2C2>; + status = "disabled"; + }; + + i2c3: i2c@21a8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c"; + reg = <0x021a8000 0x4000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_I2C3>; + status = "disabled"; + }; + + mmdc: memory-controller@21b0000 { + compatible = "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc"; + reg = <0x021b0000 0x4000>; + }; + + ocotp: ocotp-ctrl@21bc000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,imx6sll-ocotp", "syscon"; + reg = <0x021bc000 0x4000>; + clocks = <&clks IMX6SLL_CLK_OCOTP>; + + tempmon_calib: calib@38 { + reg = <0x38 4>; + }; + + tempmon_temp_grade: temp-grade@20 { + reg = <0x20 4>; + }; + }; + + audmux: audmux@21d8000 { + compatible = "fsl,imx6sll-audmux", "fsl,imx31-audmux"; + reg = <0x021d8000 0x4000>; + status = "disabled"; + }; + + uart5: serial@21f4000 { + compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", + "fsl,imx21-uart"; + reg = <0x021f4000 0x4000>; + interrupts =<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 33 4 0>, <&sdma 34 4 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_UART5_IPG>, + <&clks IMX6SLL_CLK_UART5_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts index 59e52f504922..adb5cc7d8ce2 100644 --- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts +++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2016 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -47,11 +11,6 @@ model = "Boundary Devices i.MX6 SoloX Nitrogen6sx Board"; compatible = "boundary,imx6sx-nitrogen6sx", "fsl,imx6sx"; - aliases { - fb-lcd = &lcdif1; - t-lcd = &t_lcd; - }; - memory@80000000 { reg = <0x80000000 0x40000000>; }; @@ -261,38 +220,6 @@ status = "okay"; }; -&lcdif1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcdif1>; - lcd-supply = <®_3p3v>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <16>; - bus-width = <24>; - - display-timings { - native-mode = <&t_lcd>; - t_lcd: t_lcd_default { - clock-frequency = <74160000>; - hactive = <1280>; - vactive = <720>; - hback-porch = <220>; - hfront-porch = <110>; - vback-porch = <20>; - vfront-porch = <5>; - hsync-len = <40>; - vsync-len = <5>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; -}; - &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; @@ -524,40 +451,6 @@ >; }; - pinctrl_lcdif1: lcdif1grp { - fsl,pins = < - MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0 - MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0 - MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0 - MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0 - MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0 - MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0 - MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0 - MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0 - MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0 - MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0 - MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0 - MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0 - MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0 - MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0 - MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0 - MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0 - MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0 - MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0 - MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0 - MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0 - MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0 - MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0 - MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0 - MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0 - MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0 - MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0 - MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0 - MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0 - MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0 - >; - }; - pinctrl_pcie: pciegrp { fsl,pins = < MX6SX_PAD_NAND_DATA05__GPIO4_IO_9 0xb0b0 diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts index e3533e74ccc8..9cc6ff206aea 100644 --- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts +++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts @@ -63,6 +63,7 @@ sw4_reg: sw4 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; swbst_reg: swbst { diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index d8b94f47498b..844caa39364f 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -79,6 +79,7 @@ 198000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; clocks = <&clks IMX6SX_CLK_ARM>, <&clks IMX6SX_CLK_PLL2_PFD2>, <&clks IMX6SX_CLK_STEP>, @@ -165,6 +166,12 @@ interrupt-parent = <&gpc>; ranges; + ocram_s: sram@8f8000 { + compatible = "mmio-sram"; + reg = <0x008f8000 0x4000>; + clocks = <&clks IMX6SX_CLK_OCRAM_S>; + }; + ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; @@ -591,8 +598,8 @@ regulator-1p1 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1375000>; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; regulator-always-on; anatop-reg-offset = <0x110>; anatop-vol-bit-shift = <8>; @@ -621,8 +628,8 @@ regulator-2p5 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; - regulator-min-microvolt = <2100000>; - regulator-max-microvolt = <2875000>; + regulator-min-microvolt = <2250000>; + regulator-max-microvolt = <2750000>; regulator-always-on; anatop-reg-offset = <0x130>; anatop-vol-bit-shift = <8>; @@ -814,7 +821,6 @@ crypto: caam@2100000 { compatible = "fsl,sec-v4.0"; - fsl,sec-era = <4>; #address-cells = <1>; #size-cells = <1>; reg = <0x2100000 0x10000>; @@ -1344,7 +1350,7 @@ ranges = <0x81000000 0 0 0x08f80000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */ num-lanes = <1>; - interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dts new file mode 100644 index 000000000000..3792679c0c90 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dts @@ -0,0 +1,200 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Digi International's ConnectCore6UL SBC Express board device tree source + * + * Copyright 2018 Digi International, Inc. + * + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "imx6ul.dtsi" +#include "imx6ul-ccimx6ulsom.dtsi" + +/ { + model = "Digi International ConnectCore 6UL SBC Express."; + compatible = "digi,ccimx6ulsbcexpress", "digi,ccimx6ulsom", + "fsl,imx6ul"; +}; + +&adc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc1>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <&ext_3v3>; + status = "okay"; +}; + +&ecspi3 { + cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3_master>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + smsc,disable-energy-detect; + reg = <0>; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + broken-cd; /* no carrier detect line (use polling) */ + no-1-8-v; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_adc1: adc1grp { + fsl,pins = < + /* GPIO1_4/ADC1_IN4 (pin 7 of the expansion header) */ + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0 + >; + }; + + pinctrl_ecspi3_master: ecspi3grp1 { + fsl,pins = < + MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x10b0 + MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x10b0 + MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x10b0 + MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x10b0 /* Chip Select */ + >; + }; + + pinctrl_ecspi3_slave: ecspi3grp2 { + fsl,pins = < + MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x10b0 + MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x10b0 + MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x10b0 + MX6UL_PAD_UART2_TX_DATA__ECSPI3_SS0 0x10b0 /* Chip Select */ + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x40017051 + >; + }; + + pinctrl_flexcan1: flexcan1grp{ + fsl,pins = < + MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX 0x1b020 + MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX 0x1b020 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x4001b8b0 + MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0x4001b8b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__PWM1_OUT 0x10b0 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__UART4_DCE_TX 0x1b0b1 + MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1 + MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17059 + MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x10071 + MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17059 + >; + }; + + /* General purpose pinctrl */ + pinctrl_hog: hoggrp { + fsl,pins = < + /* GPIOs BANK 3 */ + MX6UL_PAD_LCD_RESET__GPIO3_IO04 0xf030 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi new file mode 100644 index 000000000000..c71a84da1af0 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi @@ -0,0 +1,201 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Digi International's ConnectCore 6UL System-On-Module device tree source + * + * Copyright 2018 Digi International, Inc. + * + */ + +/ { + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x4000000>; + linux,cma-default; + }; + }; +}; + +&adc1 { + vref-supply = <&vdda_adc_3v3>; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pfuze3000: pmic@8 { + compatible = "fsl,pfuze3000"; + reg = <0x08>; + + regulators { + int_3v3: sw1a { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <6250>; + regulator-boot-on; + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_arm_soc_in: sw1b { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-ramp-delay = <6250>; + regulator-boot-on; + regulator-always-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <925000>; + }; + }; + + ext_3v3: sw2 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <6250>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr3: sw3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1300000>; + }; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + vdd_snvs_3v3: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vrefddr: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vdda_adc_3v3: vldo1 { + compatible = "regulator-fixed"; + regulator-name = "vref-adc-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo2_ext: vldo2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vdda_wlan: vccsd { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_high_in: v33 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_int: vldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo4_ext: vldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vcoin_chg: vcoin { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; + +&iomuxc { + pinctrl_gpmi_nand: gpmigrp { + fsl,pins = < + MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1 + MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1 + MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1 + MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1 + MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1 + MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1 + MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1 + MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1 + MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1 + MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1 + MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1 + MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1 + MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1 + MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1 + MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb0b1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 + >; + }; +}; + +®_arm { + vin-supply = <&vdd_arm_soc_in>; + regulator-allow-bypass; +}; + +®_soc { + vin-supply = <&vdd_arm_soc_in>; + regulator-allow-bypass; +}; diff --git a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts index 47682b8c023c..0c09420f9951 100644 --- a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts +++ b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts @@ -51,8 +51,9 @@ model = "Technexion Pico i.MX6UL Board"; compatible = "technexion,imx6ul-pico-hobbit", "fsl,imx6ul"; + /* Will be filled by the bootloader */ memory@80000000 { - reg = <0x80000000 0x10000000>; + reg = <0x80000000 0>; }; chosen { diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 47a3453a4211..6dc0b569acdf 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -62,6 +62,7 @@ device_type = "cpu"; reg = <0>; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; operating-points = < /* kHz uV */ 696000 1275000 @@ -433,6 +434,7 @@ reg = <0x0209c000 0x4000>; interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_GPIO1>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -446,6 +448,7 @@ reg = <0x020a0000 0x4000>; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_GPIO2>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -458,6 +461,7 @@ reg = <0x020a4000 0x4000>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_GPIO3>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -470,6 +474,7 @@ reg = <0x020a8000 0x4000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_GPIO4>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -482,6 +487,7 @@ reg = <0x020ac000 0x4000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_GPIO5>; gpio-controller; #gpio-cells = <2>; interrupt-controller; diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi index 3dffbcd50bf6..183193e8580d 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi @@ -20,20 +20,6 @@ &cpu0 { clock-frequency = <792000000>; - operating-points = < - /* kHz uV */ - 792000 1225000 - 528000 1175000 - 396000 1025000 - 198000 950000 - >; - fsl,soc-operating-points = < - /* KHz uV */ - 792000 1175000 - 528000 1175000 - 396000 1175000 - 198000 1175000 - >; }; &iomuxc { diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi index ebc25c98e5e1..cd1776a7015a 100644 --- a/arch/arm/boot/dts/imx6ull.dtsi +++ b/arch/arm/boot/dts/imx6ull.dtsi @@ -1,43 +1,6 @@ -/* - * Copyright 2016 Freescale Semiconductor, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright 2016 Freescale Semiconductor, Inc. #include "imx6ul.dtsi" #include "imx6ull-pinfunc.h" @@ -48,6 +11,25 @@ /* Delete CAAM node in AIPS-2 (i.MX6UL specific) */ /delete-node/ &crypto; +&cpu0 { + operating-points = < + /* kHz uV */ + 900000 1275000 + 792000 1225000 + 528000 1175000 + 396000 1025000 + 198000 950000 + >; + fsl,soc-operating-points = < + /* KHz uV */ + 900000 1175000 + 792000 1175000 + 528000 1175000 + 396000 1175000 + 198000 1175000 + >; +}; + / { soc { aips3: aips-bus@2200000 { diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts index 70c53e50b2fc..d8aac4a2d02a 100644 --- a/arch/arm/boot/dts/imx7d-nitrogen7.dts +++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2016 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -48,11 +11,6 @@ model = "Boundary Devices i.MX7 Nitrogen7 Board"; compatible = "boundary,imx7d-nitrogen7", "fsl,imx7d"; - aliases { - fb-lcd = &lcdif; - t-lcd = &t_lcd; - }; - memory@80000000 { reg = <0x80000000 0x40000000>; }; @@ -65,7 +23,7 @@ default-on; }; - backlight-j20 { + backlight_lcd: backlight-j20 { compatible = "pwm-backlight"; pwms = <&pwm1 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -73,6 +31,17 @@ status = "okay"; }; + panel-lcd { + compatible = "okaya,rs800480t-7x0gp"; + backlight = <&backlight_lcd>; + + port { + panel_in: endpoint { + remote-endpoint = <&lcdif_out>; + }; + }; + }; + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { compatible = "regulator-fixed"; regulator-name = "usb_otg1_vbus"; @@ -317,35 +286,11 @@ }; &lcdif { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcdif_dat - &pinctrl_lcdif_ctrl>; - lcd-supply = <®_vref_3v3>; - display = <&display0>; status = "okay"; - display0: lcd-display { - bits-per-pixel = <16>; - bus-width = <18>; - - display-timings { - native-mode = <&t_lcd>; - t_lcd: t_lcd_default { - /* default to Okaya display */ - clock-frequency = <30000000>; - hactive = <800>; - vactive = <480>; - hfront-porch = <40>; - hback-porch = <40>; - hsync-len = <48>; - vback-porch = <29>; - vfront-porch = <13>; - vsync-len = <3>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; + port { + lcdif_out: endpoint { + remote-endpoint = <&panel_in>; }; }; }; diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 940849163104..c9b3c60b0eb2 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -10,6 +10,10 @@ model = "Freescale i.MX7 SabreSD Board"; compatible = "fsl,imx7d-sdb", "fsl,imx7d"; + chosen { + stdout-path = &uart1; + }; + memory@80000000 { reg = <0x80000000 0x80000000>; }; @@ -71,14 +75,6 @@ enable-active-high; }; - reg_can2_3v3: regulator-can2-3v3 { - compatible = "regulator-fixed"; - regulator-name = "can2-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 7 GPIO_ACTIVE_LOW>; - }; - reg_vref_1v8: regulator-vref-1v8 { compatible = "regulator-fixed"; regulator-name = "vref-1v8"; @@ -116,10 +112,17 @@ gpio = <&gpio2 14 GPIO_ACTIVE_LOW>; }; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000 0>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + panel { compatible = "innolux,at043tn24"; - pinctrl-0 = <&pinctrl_backlight>; - enable-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + backlight = <&backlight>; power-supply = <®_lcd_3v3>; port { @@ -712,6 +715,12 @@ }; }; +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + &iomuxc_lpsr { pinctrl_wdog: wdoggrp { fsl,pins = < @@ -719,9 +728,9 @@ >; }; - pinctrl_backlight: backlightgrp { + pinctrl_pwm1: pwm1grp { fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x110b0 + MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x30 >; }; }; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 8d3d123d0a5c..7cbc2ffa4b3a 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -11,6 +11,7 @@ cpu0: cpu@0 { clock-frequency = <996000000>; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; cpu1: cpu@1 { diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 9ced589bfa96..a052198f6e96 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -842,7 +842,6 @@ crypto: caam@30900000 { compatible = "fsl,sec-v4.0"; - fsl,sec-era = <8>; #address-cells = <1>; #size-cells = <1>; reg = <0x30900000 0x40000>; diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi index 66954aaf2c47..5cae74eb6cdd 100644 --- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi +++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the iWave-RZ/G1M/G1N Qseven carrier board * * Copyright (C) 2017 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /* diff --git a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi index 476273b3f994..0e99df218252 100644 --- a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi +++ b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the iWave-RZ-G1M/N Daughter Board Camera Module * * Copyright (C) 2017 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ / { diff --git a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi index a17311c602aa..1db17ec744b1 100644 --- a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi @@ -225,3 +225,23 @@ netcp: netcp@24000000 { }; }; }; + +sa_subsys: subsys@24080000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0x24080000 0x40000>; + + sa_config: subsys@0 { + compatible = "syscon"; + reg = <0x0 0x100>; + }; + + rng@24000 { + compatible = "ti,keystone-rng"; + reg = <0x24000 0x1000>; + ti,syscon-sa-cfg = <&sa_config>; + clocks = <&clksa>; + clock-names = "fck"; + }; +}; diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts index 154fdd7a7022..b7f10bf94576 100644 --- a/arch/arm/boot/dts/keystone-k2g-evm.dts +++ b/arch/arm/boot/dts/keystone-k2g-evm.dts @@ -37,6 +37,14 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + vcc1v8_ldo1_reg: fixedregulator-vcc1v8-ldo1 { + compatible = "regulator-fixed"; + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; }; &k2g_pinctrl { @@ -128,6 +136,30 @@ K2G_CORE_IOPAD(0x1228) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE1) /* qspicsn3.dcan1rx */ >; }; + + emac_pins: pinmux_emac_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x113C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD1.RGMII_RXD1 */ + K2G_CORE_IOPAD(0x1138) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD2.RGMII_RXD2 */ + K2G_CORE_IOPAD(0x1134) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD3.RGMII_RXD3 */ + K2G_CORE_IOPAD(0x1140) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD0.RGMII_RXD0 */ + K2G_CORE_IOPAD(0x1178) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD0.RGMII_TXD0 */ + K2G_CORE_IOPAD(0x1174) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD1.RGMII_TXD1 */ + K2G_CORE_IOPAD(0x1170) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD2.RGMII_TXD2 */ + K2G_CORE_IOPAD(0x116C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD3.RGMII_TXD3 */ + K2G_CORE_IOPAD(0x1154) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXCLK.RGMII_TXC */ + K2G_CORE_IOPAD(0x117C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXEN.RGMII_TXCTL */ + K2G_CORE_IOPAD(0x1120) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXCLK.RGMII_RXC */ + K2G_CORE_IOPAD(0x1144) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXDV.RGMII_RXCTL */ + >; + }; + + mdio_pins: pinmux_mdio_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x118C) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* MDIO_CLK.MDIO_CLK */ + K2G_CORE_IOPAD(0x1188) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* MDIO_DATA.MDIO_DATA */ + >; + }; }; &uart0 { @@ -144,6 +176,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; vmmc-supply = <&vcc3v3_dcin_reg>; + vqmmc-supply = <&vcc3v3_dcin_reg>; cd-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -152,6 +185,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; vmmc-supply = <&vcc3v3_dcin_reg>; /* VCC3V3_EMMC is connected to VCC3V3_DCIN */ + vqmmc-supply = <&vcc1v8_ldo1_reg>; ti,non-removable; status = "okay"; }; @@ -294,3 +328,32 @@ pinctrl-0 = <&dcan1_pins>; status = "okay"; }; + +&qmss { + status = "okay"; +}; + +&knav_dmas { + status = "okay"; +}; + +&mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + status = "okay"; + ethphy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&gbe0 { + phy-handle = <ðphy0>; + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&netcp { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/keystone-k2g-ice.dts b/arch/arm/boot/dts/keystone-k2g-ice.dts index d820ed2474bb..2a2d38cf0fff 100644 --- a/arch/arm/boot/dts/keystone-k2g-ice.dts +++ b/arch/arm/boot/dts/keystone-k2g-ice.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "keystone-k2g.dtsi" +#include <dt-bindings/net/ti-dp83867.h> / { compatible = "ti,k2g-ice", "ti,k2g", "ti,keystone"; @@ -281,6 +282,30 @@ K2G_CORE_IOPAD(0x11bc) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* spi2_scsn1.gpio0_102 */ >; }; + + emac_pins: pinmux_emac_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x113C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD1.RGMII_RXD1 */ + K2G_CORE_IOPAD(0x1138) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD2.RGMII_RXD2 */ + K2G_CORE_IOPAD(0x1134) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD3.RGMII_RXD3 */ + K2G_CORE_IOPAD(0x1140) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD0.RGMII_RXD0 */ + K2G_CORE_IOPAD(0x1178) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD0.RGMII_TXD0 */ + K2G_CORE_IOPAD(0x1174) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD1.RGMII_TXD1 */ + K2G_CORE_IOPAD(0x1170) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD2.RGMII_TXD2 */ + K2G_CORE_IOPAD(0x116C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD3.RGMII_TXD3 */ + K2G_CORE_IOPAD(0x1154) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXCLK.RGMII_TXC */ + K2G_CORE_IOPAD(0x117C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXEN.RGMII_TXCTL */ + K2G_CORE_IOPAD(0x1120) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXCLK.RGMII_RXC */ + K2G_CORE_IOPAD(0x1144) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXDV.RGMII_RXCTL */ + >; + }; + + mdio_pins: pinmux_mdio_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x118C) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* MDIO_CLK.MDIO_CLK */ + K2G_CORE_IOPAD(0x1188) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* MDIO_DATA.MDIO_DATA */ + >; + }; }; &uart0 { @@ -386,3 +411,37 @@ vcc-supply = <&vdd_3v3>; }; }; + +&qmss { + status = "okay"; +}; + +&knav_dmas { + status = "okay"; +}; + +&netcp { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins>; + status = "okay"; +}; + +&mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + status = "okay"; + ethphy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; + ti,min-output-impedance; + ti,dp83867-rxctrl-strap-quirk; + }; +}; + +&gbe0 { + phy-handle = <ðphy0>; + phy-mode = "rgmii-id"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/keystone-k2g-netcp.dtsi b/arch/arm/boot/dts/keystone-k2g-netcp.dtsi new file mode 100644 index 000000000000..d0e6a9a43402 --- /dev/null +++ b/arch/arm/boot/dts/keystone-k2g-netcp.dtsi @@ -0,0 +1,147 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for K2G Netcp driver + * + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ + */ + +qmss: qmss@4020000 { + compatible = "ti,66ak2g-navss-qm"; + dma-coherent; + #address-cells = <1>; + #size-cells = <1>; + power-domains = <&k2g_pds 0x0018>; + clocks = <&k2g_clks 0x0018 0>; + clock-names = "nss_vclk"; + ranges; + queue-range = <0 0x80>; + linkram0 = <0x4020000 0x7ff>; + status = "disabled"; + + qmgrs { + #address-cells = <1>; + #size-cells = <1>; + ranges; + qmgr0 { + managed-queues = <0 0x80>; + reg = <0x4100000 0x800>, + <0x4040000 0x100>, + <0x4080000 0x800>, + <0x40c0000 0x800>; + reg-names = "peek", "config", + "region", "push"; + }; + + }; + queue-pools { + qpend { + qpend-0 { + qrange = <77 8>; + interrupts =<0 308 0xf04 0 309 0xf04 0 310 0xf04 + 0 311 0xf04 0 312 0xf04 0 313 0xf04 + 0 314 0xf04 0 315 0xf04>; + qalloc-by-id; + }; + }; + general-purpose { + gp-0 { + qrange = <112 8>; + }; + netcp-tx { + qrange = <5 8>; + qalloc-by-id; + }; + }; + }; + + descriptor-regions { + #address-cells = <1>; + #size-cells = <1>; + ranges; + region-12 { + id = <12>; + region-spec = <1023 128>; /* num_desc desc_size */ + link-index = <0x400>; + }; + }; +}; /* qmss */ + +knav_dmas: knav_dmas@0 { + compatible = "ti,keystone-navigator-dma"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + power-domains = <&k2g_pds 0x0018>; + clocks = <&k2g_clks 0x0018 0>; + clock-names = "nss_vclk"; + ranges; + ti,navigator-cloud-address = <0x40c0000 0x40c0000 0x40c0000 0x40c0000>; + + dma_gbe: dma_gbe@0 { + reg = <0x4010000 0x100>, + <0x4011000 0x2a0>, /* 21 Tx channels */ + <0x4012000 0x400>, /* 32 Rx channels */ + <0x4010100 0x80>, + <0x4013000 0x400>; /* 32 Rx flows */ + reg-names = "global", "txchan", "rxchan", + "txsched", "rxflow"; + }; + +}; + +netcp: netcp@4000000 { + reg = <0x2620110 0x8>; + reg-names = "efuse"; + compatible = "ti,netcp-1.0"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + power-domains = <&k2g_pds 0x0018>; + clocks = <&k2g_clks 0x0018 3>, <&k2g_clks 0x0018 8>; + clock-names = "ethss_clk", "cpts"; + + /* NetCP address range */ + ranges = <0 0x4000000 0x1000000>; + + dma-coherent; + + ti,navigator-dmas = <&dma_gbe 0>, <&dma_gbe 5>; + ti,navigator-dma-names = "netrx0", "nettx"; + + netcp-devices { + #address-cells = <1>; + #size-cells = <1>; + ranges; + gbe: gbe@200000 { + label = "netcp-gbe"; + compatible = "ti,netcp-gbe-2"; + reg = <0x200000 0x20>, <0x220000 0x20000>; + enable-ale; + tx-queue = <5>; + tx-channel = "nettx"; + cpts-rftclk-sel = <0>; + cpts-ext-ts-inputs = <8>; + + interfaces { + gbe0: interface-0 { + slave-port = <0>; + link-interface = <5>; + }; + }; + }; + }; + + netcp-interfaces { + interface-0 { + rx-channel = "netrx0"; + rx-pool = <512 12>; + tx-pool = <511 12>; + rx-queue-depth = <128 128 0 0>; + rx-buffer-size = <1518 4096 0 0>; + rx-queue = <77>; + tx-completion-queue = <78>; + efuse-mac = <1>; + netcp-gbe = <&gbe0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi index da78c0034427..738b44cf2b0b 100644 --- a/arch/arm/boot/dts/keystone-k2g.dtsi +++ b/arch/arm/boot/dts/keystone-k2g.dtsi @@ -391,13 +391,10 @@ }; mmc0: mmc@23000000 { - compatible = "ti,k2g-hsmmc", "ti,omap4-hsmmc"; + compatible = "ti,k2g-sdhci"; reg = <0x23000000 0x400>; interrupts = <GIC_SPI 96 IRQ_TYPE_EDGE_RISING>; - dmas = <&edma1 24 0>, <&edma1 25 0>; - dma-names = "tx", "rx"; bus-width = <4>; - ti,needs-special-reset; no-1-8-v; max-frequency = <96000000>; power-domains = <&k2g_pds 0xb>; @@ -407,13 +404,12 @@ }; mmc1: mmc@23100000 { - compatible = "ti,k2g-hsmmc", "ti,omap4-hsmmc"; + compatible = "ti,k2g-sdhci"; reg = <0x23100000 0x400>; interrupts = <GIC_SPI 97 IRQ_TYPE_EDGE_RISING>; - dmas = <&edma1 26 0>, <&edma1 27 0>; - dma-names = "tx", "rx"; bus-width = <8>; - ti,needs-special-reset; + no-1-8-v; + non-removable; max-frequency = <96000000>; power-domains = <&k2g_pds 0xc>; clocks = <&k2g_clks 0xc 1>, <&k2g_clks 0xc 2>; @@ -609,5 +605,18 @@ reg = <0x21010000 0x200>; interrupts = <GIC_SPI 123 IRQ_TYPE_EDGE_RISING>; }; + + mdio: mdio@4200f00 { + compatible = "ti,keystone_mdio", "ti,davinci_mdio"; + reg = <0x04200f00 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k2g_clks 0x0018 3>; + clock-names = "fck"; + power-domains = <&k2g_pds 0x0018>; + status = "disabled"; + bus_freq = <2500000>; + }; + #include "keystone-k2g-netcp.dtsi" }; }; diff --git a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi index b88c0689c285..e203145acbea 100644 --- a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi @@ -228,3 +228,23 @@ netcp: netcp@2000000 { }; }; }; + +sa_subsys: subsys@20c0000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x20c0000 0x40000>; + + sa_config: subsys@0 { + compatible = "syscon"; + reg = <0x0 0x100>; + }; + + rng@24000 { + compatible = "ti,keystone-rng"; + reg = <0x24000 0x1000>; + ti,syscon-sa-cfg = <&sa_config>; + clocks = <&clksa>; + clock-names = "fck"; + }; +}; diff --git a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi index 9ec84228bc16..a2e47bad3307 100644 --- a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi @@ -208,3 +208,23 @@ netcp: netcp@26000000 { }; }; }; + +sa_subsys: subsys@26080000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0x26080000 0x40000>; + + sa_config: subsys@0 { + compatible = "syscon"; + reg = <0x0 0x100>; + }; + + rng@24000 { + compatible = "ti,keystone-rng"; + reg = <0x24000 0x1000>; + ti,syscon-sa-cfg = <&sa_config>; + clocks = <&clksa>; + clock-names = "fck"; + }; +}; diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index 3bb28c03ca74..ac343330d0c8 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -142,7 +142,7 @@ compatible = "ti,wl1273"; reg = <2>; interrupt-parent = <&gpio1>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; /* gpio 2 */ + interrupts = <2 IRQ_TYPE_EDGE_RISING>; /* gpio 2 */ ref-clock-frequency = <26000000>; }; }; diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts index 234afd6d60ec..9d5d53fbe9c0 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts @@ -48,7 +48,7 @@ compatible = "ti,wl1283"; reg = <2>; interrupt-parent = <&gpio5>; - interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */ + interrupts = <24 IRQ_TYPE_EDGE_RISING>; /* gpio 152 */ ref-clock-frequency = <26000000>; tcxo-clock-frequency = <26000000>; }; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index c55d479971cc..f18490548c78 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -84,6 +84,7 @@ device_type = "cpu"; reg = <0xf01>; clocks = <&clockgen 1 0>; + #cooling-cells = <2>; }; }; diff --git a/arch/arm/boot/dts/omap3-cm-t3517.dts b/arch/arm/boot/dts/omap3-cm-t3517.dts index 4994e33bf663..632f52efdf98 100644 --- a/arch/arm/boot/dts/omap3-cm-t3517.dts +++ b/arch/arm/boot/dts/omap3-cm-t3517.dts @@ -141,7 +141,7 @@ compatible = "ti,wl1271"; reg = <2>; interrupt-parent = <&gpio5>; - interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; /* gpio 145 */ + interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* gpio 145 */ ref-clock-frequency = <38400000>; }; }; diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts index 8c63ac5bbb12..6e944dfa0f3d 100644 --- a/arch/arm/boot/dts/omap3-cm-t3730.dts +++ b/arch/arm/boot/dts/omap3-cm-t3730.dts @@ -81,7 +81,7 @@ compatible = "ti,wl1271"; reg = <2>; interrupt-parent = <&gpio5>; - interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; /* gpio 136 */ + interrupts = <8 IRQ_TYPE_EDGE_RISING>; /* gpio 136 */ ref-clock-frequency = <38400000>; }; }; diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi index ee64191e41ca..4c1227d1e79b 100644 --- a/arch/arm/boot/dts/omap3-evm-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -133,7 +133,7 @@ compatible = "ti,wl1271"; reg = <2>; interrupt-parent = <&gpio5>; - interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 149 */ + interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 149 */ ref-clock-frequency = <38400000>; }; }; diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts index 321c2b7a4e9f..285681d7af49 100644 --- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts +++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts @@ -49,6 +49,6 @@ compatible = "ti,wl1835"; reg = <2>; interrupt-parent = <&gpio6>; - interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; /* gpio 177 */ + interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* gpio 177 */ }; }; diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts index 76dc08868bfb..1adc73bd2ca0 100644 --- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts +++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts @@ -71,6 +71,6 @@ compatible = "ti,wl1835"; reg = <2>; interrupt-parent = <&gpio5>; - interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; /* gpio 136 */ + interrupts = <8 IRQ_TYPE_EDGE_RISING>; /* gpio 136 */ }; }; diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts index 96d0301a336a..aac27a441331 100644 --- a/arch/arm/boot/dts/omap3-zoom3.dts +++ b/arch/arm/boot/dts/omap3-zoom3.dts @@ -202,7 +202,7 @@ compatible = "ti,wl1271"; reg = <2>; interrupt-parent = <&gpio6>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; /* gpio 162 */ + interrupts = <2 IRQ_TYPE_EDGE_RISING>; /* gpio 162 */ ref-clock-frequency = <26000000>; }; }; diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index bdf73cbcec3a..63105ca92e9c 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -128,6 +128,8 @@ gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; /* gpio154 */ linux,code = <KEY_VOLUMEDOWN>; linux,can-disable; + /* Value above 7.95ms for no GPIO hardware debounce */ + debounce-interval = <10>; }; slider { @@ -136,7 +138,8 @@ linux,input-type = <EV_SW>; linux,code = <SW_KEYPAD_SLIDE>; linux,can-disable; - + /* Value above 7.95ms for no GPIO hardware debounce */ + debounce-interval = <10>; }; }; @@ -372,7 +375,7 @@ compatible = "ti,wl1285", "ti,wl1283"; reg = <2>; interrupt-parent = <&gpio4>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; /* gpio100 */ + interrupts = <4 IRQ_TYPE_EDGE_RISING>; /* gpio100 */ ref-clock-frequency = <26000000>; tcxo-clock-frequency = <26000000>; }; diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts index a9a584b5b955..cfcac0d73851 100644 --- a/arch/arm/boot/dts/omap4-duovero-parlor.dts +++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts @@ -36,6 +36,8 @@ label = "button0"; linux,code = <BTN_0>; gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; /* gpio_121 */ + /* Value above 7.95ms for no GPIO hardware debounce */ + debounce-interval = <10>; wakeup-source; }; }; @@ -140,7 +142,7 @@ ethernet@gpmc { reg = <5 0 0xff>; interrupt-parent = <&gpio2>; - interrupts = <12 IRQ_TYPE_LEVEL_LOW>; /* gpio_44 */ + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; /* gpio_44 */ phy-mode = "mii"; diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/omap4-duovero.dtsi index eb123b24c8e3..5e8169153414 100644 --- a/arch/arm/boot/dts/omap4-duovero.dtsi +++ b/arch/arm/boot/dts/omap4-duovero.dtsi @@ -248,6 +248,7 @@ ti,bus-width = <4>; ti,non-removable; cap-power-off-card; + keep-power-in-suspend; }; &twl_usb_comparator { diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi new file mode 100644 index 000000000000..6eb26b837446 --- /dev/null +++ b/arch/arm/boot/dts/omap4-l4.dtsi @@ -0,0 +1,2444 @@ +// SPDX-License-Identifier: GPL-2.0 +&l4_cfg { /* 0x4a000000 */ + compatible = "ti,omap4-l4-cfg", "simple-bus"; + reg = <0x4a000000 0x800>, + <0x4a000800 0x800>, + <0x4a001000 0x1000>; + reg-names = "ap", "la", "ia0"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4a000000 0x080000>, /* segment 0 */ + <0x00080000 0x4a080000 0x080000>, /* segment 1 */ + <0x00100000 0x4a100000 0x080000>, /* segment 2 */ + <0x00180000 0x4a180000 0x080000>, /* segment 3 */ + <0x00200000 0x4a200000 0x080000>, /* segment 4 */ + <0x00280000 0x4a280000 0x080000>, /* segment 5 */ + <0x00300000 0x4a300000 0x080000>; /* segment 6 */ + + segment@0 { /* 0x4a000000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00001000 0x00001000 0x001000>, /* ap 1 */ + <0x00000800 0x00000800 0x000800>, /* ap 2 */ + <0x00002000 0x00002000 0x001000>, /* ap 3 */ + <0x00003000 0x00003000 0x001000>, /* ap 4 */ + <0x00004000 0x00004000 0x001000>, /* ap 5 */ + <0x00005000 0x00005000 0x001000>, /* ap 6 */ + <0x00056000 0x00056000 0x001000>, /* ap 7 */ + <0x00057000 0x00057000 0x001000>, /* ap 8 */ + <0x0005c000 0x0005c000 0x001000>, /* ap 9 */ + <0x00058000 0x00058000 0x004000>, /* ap 10 */ + <0x00062000 0x00062000 0x001000>, /* ap 11 */ + <0x00063000 0x00063000 0x001000>, /* ap 12 */ + <0x00008000 0x00008000 0x002000>, /* ap 23 */ + <0x0000a000 0x0000a000 0x001000>, /* ap 24 */ + <0x00066000 0x00066000 0x001000>, /* ap 25 */ + <0x00067000 0x00067000 0x001000>, /* ap 26 */ + <0x0005e000 0x0005e000 0x002000>, /* ap 80 */ + <0x00060000 0x00060000 0x001000>, /* ap 81 */ + <0x00064000 0x00064000 0x001000>, /* ap 86 */ + <0x00065000 0x00065000 0x001000>; /* ap 87 */ + + target-module@2000 { /* 0x4a002000, ap 3 06.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "ctrl_module_core"; + reg = <0x2000 0x4>, + <0x2010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */ + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x1000>; + + omap4_scm_core: scm@0 { + compatible = "ti,omap4-scm-core", "simple-bus"; + reg = <0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000>; + + scm_conf: scm_conf@0 { + compatible = "syscon"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + }; + + omap_control_usb2phy: control-phy@300 { + compatible = "ti,control-phy-usb2"; + reg = <0x300 0x4>; + reg-names = "power"; + }; + + omap_control_usbotg: control-phy@33c { + compatible = "ti,control-phy-otghs"; + reg = <0x33c 0x4>; + reg-names = "otghs_control"; + }; + }; + }; + + target-module@4000 { /* 0x4a004000, ap 5 02.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x4000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + + cm1: cm1@0 { + compatible = "ti,omap4-cm1", "simple-bus"; + reg = <0x0 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x2000>; + + cm1_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + cm1_clockdomains: clockdomains { + }; + }; + }; + + target-module@8000 { /* 0x4a008000, ap 23 32.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x8000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x2000>; + + cm2: cm2@0 { + compatible = "ti,omap4-cm2", "simple-bus"; + reg = <0x0 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x2000>; + + cm2_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + cm2_clockdomains: clockdomains { + }; + }; + }; + + target-module@56000 { /* 0x4a056000, ap 7 0a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "dma_system"; + reg = <0x56000 0x4>, + <0x5602c 0x4>, + <0x56028 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l3_dma_clkdm */ + clocks = <&l3_dma_clkctrl OMAP4_DMA_SYSTEM_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x56000 0x1000>; + + sdma: dma-controller@0 { + compatible = "ti,omap4430-sdma"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + dma-channels = <32>; + dma-requests = <127>; + }; + }; + + target-module@58000 { /* 0x4a058000, ap 10 0e.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "hsi"; + reg = <0x58000 0x4>, + <0x58010 0x4>, + <0x58014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ + clocks = <&l3_init_clkctrl OMAP4_HSI_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x58000 0x4000>; + + hsi: hsi@0 { + compatible = "ti,omap4-hsi"; + reg = <0x0 0x4000>, + <0x4a05c000 0x1000>; + reg-names = "sys", "gdd"; + + clocks = <&l3_init_clkctrl OMAP4_HSI_CLKCTRL 0>; + clock-names = "hsi_fck"; + + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gdd_mpu"; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x4000>; + + hsi_port1: hsi-port@2000 { + compatible = "ti,omap4-hsi-port"; + reg = <0x2000 0x800>, + <0x2800 0x800>; + reg-names = "tx", "rx"; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + }; + + hsi_port2: hsi-port@3000 { + compatible = "ti,omap4-hsi-port"; + reg = <0x3000 0x800>, + <0x3800 0x800>; + reg-names = "tx", "rx"; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; + + target-module@5e000 { /* 0x4a05e000, ap 80 68.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5e000 0x2000>; + }; + + target-module@62000 { /* 0x4a062000, ap 11 16.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "usb_tll_hs"; + reg = <0x62000 0x4>, + <0x62010 0x4>, + <0x62014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ + clocks = <&l3_init_clkctrl OMAP4_USB_TLL_HS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x62000 0x1000>; + + usbhstll: usbhstll@0 { + compatible = "ti,usbhs-tll"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@64000 { /* 0x4a064000, ap 86 1e.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "usb_host_hs"; + reg = <0x64000 0x4>, + <0x64010 0x4>, + <0x64014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ + clocks = <&l3_init_clkctrl OMAP4_USB_HOST_HS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x64000 0x1000>; + + usbhshost: usbhshost@0 { + compatible = "ti,usbhs-host"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000>; + clocks = <&init_60m_fclk>, + <&xclk60mhsp1_ck>, + <&xclk60mhsp2_ck>; + clock-names = "refclk_60m_int", + "refclk_60m_ext_p1", + "refclk_60m_ext_p2"; + + usbhsohci: ohci@800 { + compatible = "ti,ohci-omap3"; + reg = <0x800 0x400>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + remote-wakeup-connected; + }; + + usbhsehci: ehci@c00 { + compatible = "ti,ehci-omap"; + reg = <0xc00 0x400>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; + + target-module@66000 { /* 0x4a066000, ap 25 26.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "mmu_dsp"; + reg = <0x66000 0x4>, + <0x66010 0x4>, + <0x66014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): iva, tesla_pwrdm, tesla_clkdm */ + clocks = <&tesla_clkctrl OMAP4_DSP_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x66000 0x1000>; + + /* mmu_dsp cannot be moved before reset driver */ + status = "disabled"; + }; + }; + + segment@80000 { /* 0x4a080000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00059000 0x000d9000 0x001000>, /* ap 13 */ + <0x0005a000 0x000da000 0x001000>, /* ap 14 */ + <0x0005b000 0x000db000 0x001000>, /* ap 15 */ + <0x0005c000 0x000dc000 0x001000>, /* ap 16 */ + <0x0005d000 0x000dd000 0x001000>, /* ap 17 */ + <0x0005e000 0x000de000 0x001000>, /* ap 18 */ + <0x00060000 0x000e0000 0x001000>, /* ap 19 */ + <0x00061000 0x000e1000 0x001000>, /* ap 20 */ + <0x00074000 0x000f4000 0x001000>, /* ap 27 */ + <0x00075000 0x000f5000 0x001000>, /* ap 28 */ + <0x00076000 0x000f6000 0x001000>, /* ap 29 */ + <0x00077000 0x000f7000 0x001000>, /* ap 30 */ + <0x00036000 0x000b6000 0x001000>, /* ap 69 */ + <0x00037000 0x000b7000 0x001000>, /* ap 70 */ + <0x0004d000 0x000cd000 0x001000>, /* ap 78 */ + <0x0004e000 0x000ce000 0x001000>, /* ap 79 */ + <0x00029000 0x000a9000 0x001000>, /* ap 82 */ + <0x0002a000 0x000aa000 0x001000>, /* ap 83 */ + <0x0002b000 0x000ab000 0x001000>, /* ap 84 */ + <0x0002c000 0x000ac000 0x001000>, /* ap 85 */ + <0x0002d000 0x000ad000 0x001000>, /* ap 88 */ + <0x0002e000 0x000ae000 0x001000>; /* ap 89 */ + + target-module@29000 { /* 0x4a0a9000, ap 82 04.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x29000 0x1000>; + }; + + target-module@2b000 { /* 0x4a0ab000, ap 84 12.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "usb_otg_hs"; + reg = <0x2b400 0x4>, + <0x2b404 0x4>, + <0x2b408 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ + clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2b000 0x1000>; + + usb_otg_hs: usb_otg_hs@0 { + compatible = "ti,omap4-musb"; + reg = <0x0 0x7ff>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mc", "dma"; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + multipoint = <1>; + num-eps = <16>; + ram-bits = <12>; + ctrl-module = <&omap_control_usbotg>; + }; + }; + + target-module@2d000 { /* 0x4a0ad000, ap 88 0c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "ocp2scp_usb_phy"; + reg = <0x2d000 0x4>, + <0x2d010 0x4>, + <0x2d014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ + clocks = <&l3_init_clkctrl OMAP4_OCP2SCP_USB_PHY_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2d000 0x1000>; + + ocp2scp@0 { + compatible = "ti,omap-ocp2scp"; + reg = <0x0 0x1f>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000>; + usb2_phy: usb2phy@80 { + compatible = "ti,omap-usb2"; + reg = <0x80 0x58>; + ctrl-module = <&omap_control_usb2phy>; + clocks = <&usb_phy_cm_clk32k>; + clock-names = "wkupclk"; + #phy-cells = <0>; + }; + }; + }; + + target-module@36000 { /* 0x4a0b6000, ap 69 60.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x36000 0x1000>; + }; + + target-module@4d000 { /* 0x4a0cd000, ap 78 58.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4d000 0x1000>; + }; + + target-module@59000 { /* 0x4a0d9000, ap 13 1a.0 */ + compatible = "ti,sysc-omap4-sr", "ti,sysc"; + ti,hwmods = "smartreflex_mpu"; + reg = <0x59038 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, always_on_core_pwrdm, l4_ao_clkdm */ + clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_MPU_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x59000 0x1000>; + + smartreflex_mpu: smartreflex@0 { + compatible = "ti,omap4-smartreflex-mpu"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@5b000 { /* 0x4a0db000, ap 15 08.0 */ + compatible = "ti,sysc-omap4-sr", "ti,sysc"; + ti,hwmods = "smartreflex_iva"; + reg = <0x5b038 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, always_on_core_pwrdm, l4_ao_clkdm */ + clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_IVA_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5b000 0x1000>; + + smartreflex_iva: smartreflex@0 { + compatible = "ti,omap4-smartreflex-iva"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@5d000 { /* 0x4a0dd000, ap 17 22.0 */ + compatible = "ti,sysc-omap4-sr", "ti,sysc"; + ti,hwmods = "smartreflex_core"; + reg = <0x5d038 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, always_on_core_pwrdm, l4_ao_clkdm */ + clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_CORE_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5d000 0x1000>; + + smartreflex_core: smartreflex@0 { + compatible = "ti,omap4-smartreflex-core"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@60000 { /* 0x4a0e0000, ap 19 1c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x60000 0x1000>; + }; + + target-module@74000 { /* 0x4a0f4000, ap 27 24.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox"; + reg = <0x74000 0x4>, + <0x74010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */ + clocks = <&l4_cfg_clkctrl OMAP4_MAILBOX_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x74000 0x1000>; + + mailbox: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <3>; + ti,mbox-num-fifos = <8>; + mbox_ipu: mbox_ipu { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <1 0 0>; + }; + mbox_dsp: mbox_dsp { + ti,mbox-tx = <3 0 0>; + ti,mbox-rx = <2 0 0>; + }; + }; + }; + + target-module@76000 { /* 0x4a0f6000, ap 29 3a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "spinlock"; + reg = <0x76000 0x4>, + <0x76010 0x4>, + <0x76014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */ + clocks = <&l4_cfg_clkctrl OMAP4_SPINLOCK_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x76000 0x1000>; + + hwspinlock: spinlock@0 { + compatible = "ti,omap4-hwspinlock"; + reg = <0x0 0x1000>; + #hwlock-cells = <1>; + }; + }; + }; + + segment@100000 { /* 0x4a100000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00100000 0x001000>, /* ap 21 */ + <0x00001000 0x00101000 0x001000>, /* ap 22 */ + <0x00002000 0x00102000 0x001000>, /* ap 61 */ + <0x00003000 0x00103000 0x001000>, /* ap 62 */ + <0x00008000 0x00108000 0x001000>, /* ap 63 */ + <0x00009000 0x00109000 0x001000>, /* ap 64 */ + <0x0000a000 0x0010a000 0x001000>, /* ap 65 */ + <0x0000b000 0x0010b000 0x001000>; /* ap 66 */ + + target-module@0 { /* 0x4a100000, ap 21 2a.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "ctrl_module_pad_core"; + reg = <0x0 0x4>, + <0x10 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */ + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1000>; + + omap4_pmx_core: pinmux@40 { + compatible = "ti,omap4-padconf", + "pinctrl-single"; + reg = <0x40 0x0196>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <1>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + + omap4_padconf_global: omap4_padconf_global@5a0 { + compatible = "syscon", + "simple-bus"; + reg = <0x5a0 0x170>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x5a0 0x170>; + + pbias_regulator: pbias_regulator@60 { + compatible = "ti,pbias-omap4", "ti,pbias-omap"; + reg = <0x60 0x4>; + syscon = <&omap4_padconf_global>; + pbias_mmc_reg: pbias_mmc_omap4 { + regulator-name = "pbias_mmc_omap4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + }; + }; + }; + + target-module@2000 { /* 0x4a102000, ap 61 3c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x1000>; + }; + + target-module@8000 { /* 0x4a108000, ap 63 62.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x1000>; + }; + + target-module@a000 { /* 0x4a10a000, ap 65 50.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "fdif"; + reg = <0xa000 0x4>, + <0xa010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-delay-us = <2>; + /* Domains (V, P, C): core, cam_pwrdm, iss_clkdm */ + clocks = <&iss_clkctrl OMAP4_FDIF_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa000 0x1000>; + + /* No child device binding or driver in mainline */ + }; + }; + + segment@180000 { /* 0x4a180000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + }; + + segment@200000 { /* 0x4a200000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0001e000 0x0021e000 0x001000>, /* ap 31 */ + <0x0001f000 0x0021f000 0x001000>, /* ap 32 */ + <0x0000a000 0x0020a000 0x001000>, /* ap 33 */ + <0x0000b000 0x0020b000 0x001000>, /* ap 34 */ + <0x00004000 0x00204000 0x001000>, /* ap 35 */ + <0x00005000 0x00205000 0x001000>, /* ap 36 */ + <0x00006000 0x00206000 0x001000>, /* ap 37 */ + <0x00007000 0x00207000 0x001000>, /* ap 38 */ + <0x00012000 0x00212000 0x001000>, /* ap 39 */ + <0x00013000 0x00213000 0x001000>, /* ap 40 */ + <0x0000c000 0x0020c000 0x001000>, /* ap 41 */ + <0x0000d000 0x0020d000 0x001000>, /* ap 42 */ + <0x00010000 0x00210000 0x001000>, /* ap 43 */ + <0x00011000 0x00211000 0x001000>, /* ap 44 */ + <0x00016000 0x00216000 0x001000>, /* ap 45 */ + <0x00017000 0x00217000 0x001000>, /* ap 46 */ + <0x00014000 0x00214000 0x001000>, /* ap 47 */ + <0x00015000 0x00215000 0x001000>, /* ap 48 */ + <0x00018000 0x00218000 0x001000>, /* ap 49 */ + <0x00019000 0x00219000 0x001000>, /* ap 50 */ + <0x00020000 0x00220000 0x001000>, /* ap 51 */ + <0x00021000 0x00221000 0x001000>, /* ap 52 */ + <0x00026000 0x00226000 0x001000>, /* ap 53 */ + <0x00027000 0x00227000 0x001000>, /* ap 54 */ + <0x00028000 0x00228000 0x001000>, /* ap 55 */ + <0x00029000 0x00229000 0x001000>, /* ap 56 */ + <0x0002a000 0x0022a000 0x001000>, /* ap 57 */ + <0x0002b000 0x0022b000 0x001000>, /* ap 58 */ + <0x0001c000 0x0021c000 0x001000>, /* ap 59 */ + <0x0001d000 0x0021d000 0x001000>; /* ap 60 */ + + target-module@4000 { /* 0x4a204000, ap 35 42.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + }; + + target-module@6000 { /* 0x4a206000, ap 37 4a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6000 0x1000>; + }; + + target-module@a000 { /* 0x4a20a000, ap 33 2c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa000 0x1000>; + }; + + target-module@c000 { /* 0x4a20c000, ap 41 20.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc000 0x1000>; + }; + + target-module@10000 { /* 0x4a210000, ap 43 52.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000 0x1000>; + }; + + target-module@12000 { /* 0x4a212000, ap 39 18.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x12000 0x1000>; + }; + + target-module@14000 { /* 0x4a214000, ap 47 30.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x14000 0x1000>; + }; + + target-module@16000 { /* 0x4a216000, ap 45 28.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x16000 0x1000>; + }; + + target-module@18000 { /* 0x4a218000, ap 49 38.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x18000 0x1000>; + }; + + target-module@1c000 { /* 0x4a21c000, ap 59 5a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1c000 0x1000>; + }; + + target-module@1e000 { /* 0x4a21e000, ap 31 10.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e000 0x1000>; + }; + + target-module@20000 { /* 0x4a220000, ap 51 40.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20000 0x1000>; + }; + + target-module@26000 { /* 0x4a226000, ap 53 34.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x26000 0x1000>; + }; + + target-module@28000 { /* 0x4a228000, ap 55 2e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x28000 0x1000>; + }; + + target-module@2a000 { /* 0x4a22a000, ap 57 48.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2a000 0x1000>; + }; + }; + + segment@280000 { /* 0x4a280000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + }; + + l4_cfg_segment_300000: segment@300000 { /* 0x4a300000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00300000 0x020000>, /* ap 67 */ + <0x00040000 0x00340000 0x001000>, /* ap 68 */ + <0x00020000 0x00320000 0x004000>, /* ap 71 */ + <0x00024000 0x00324000 0x002000>, /* ap 72 */ + <0x00026000 0x00326000 0x001000>, /* ap 73 */ + <0x00027000 0x00327000 0x001000>, /* ap 74 */ + <0x00028000 0x00328000 0x001000>, /* ap 75 */ + <0x00029000 0x00329000 0x001000>, /* ap 76 */ + <0x00030000 0x00330000 0x010000>, /* ap 77 */ + <0x0002a000 0x0032a000 0x002000>, /* ap 90 */ + <0x0002c000 0x0032c000 0x004000>; /* ap 91 */ + + l4_cfg_target_0: target-module@0 { /* 0x4a300000, ap 67 14.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x00020000>, + <0x00020000 0x00020000 0x00004000>, + <0x00024000 0x00024000 0x00002000>, + <0x00026000 0x00026000 0x00001000>, + <0x00027000 0x00027000 0x00001000>, + <0x00028000 0x00028000 0x00001000>, + <0x00029000 0x00029000 0x00001000>, + <0x0002a000 0x0002a000 0x00002000>, + <0x0002c000 0x0002c000 0x00004000>, + <0x00030000 0x00030000 0x00010000>; + }; + }; +}; + +&l4_wkup { /* 0x4a300000 */ + compatible = "ti,omap4-l4-wkup", "simple-bus"; + reg = <0x4a300000 0x800>, + <0x4a300800 0x800>, + <0x4a301000 0x1000>; + reg-names = "ap", "la", "ia0"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4a300000 0x010000>, /* segment 0 */ + <0x00010000 0x4a310000 0x010000>, /* segment 1 */ + <0x00020000 0x4a320000 0x010000>; /* segment 2 */ + + segment@0 { /* 0x4a300000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00001000 0x00001000 0x001000>, /* ap 1 */ + <0x00000800 0x00000800 0x000800>, /* ap 2 */ + <0x00006000 0x00006000 0x002000>, /* ap 3 */ + <0x00008000 0x00008000 0x001000>, /* ap 4 */ + <0x0000a000 0x0000a000 0x001000>, /* ap 15 */ + <0x0000b000 0x0000b000 0x001000>, /* ap 16 */ + <0x00004000 0x00004000 0x001000>, /* ap 17 */ + <0x00005000 0x00005000 0x001000>, /* ap 18 */ + <0x0000c000 0x0000c000 0x001000>, /* ap 19 */ + <0x0000d000 0x0000d000 0x001000>; /* ap 20 */ + + target-module@4000 { /* 0x4a304000, ap 17 24.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "counter_32k"; + reg = <0x4000 0x4>, + <0x4004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl OMAP4_COUNTER_32K_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + + counter32k: counter@0 { + compatible = "ti,omap-counter32k"; + reg = <0x0 0x20>; + }; + }; + + target-module@6000 { /* 0x4a306000, ap 3 08.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x6000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6000 0x2000>; + + prm: prm@0 { + compatible = "ti,omap4-prm"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x2000>; + + prm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prm_clockdomains: clockdomains { + }; + }; + }; + + target-module@a000 { /* 0x4a30a000, ap 15 34.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xa000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa000 0x1000>; + + scrm: scrm@0 { + compatible = "ti,omap4-scrm"; + reg = <0x0 0x2000>; + + scrm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + scrm_clockdomains: clockdomains { + }; + }; + }; + + target-module@c000 { /* 0x4a30c000, ap 19 2c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "ctrl_module_wkup"; + reg = <0xc000 0x4>, + <0xc010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc000 0x1000>; + + omap4_scm_wkup: scm@c000 { + compatible = "ti,omap4-scm-wkup"; + reg = <0xc000 0x1000>; + }; + }; + }; + + segment@10000 { /* 0x4a310000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00010000 0x001000>, /* ap 5 */ + <0x00001000 0x00011000 0x001000>, /* ap 6 */ + <0x00004000 0x00014000 0x001000>, /* ap 7 */ + <0x00005000 0x00015000 0x001000>, /* ap 8 */ + <0x00008000 0x00018000 0x001000>, /* ap 9 */ + <0x00009000 0x00019000 0x001000>, /* ap 10 */ + <0x0000c000 0x0001c000 0x001000>, /* ap 11 */ + <0x0000d000 0x0001d000 0x001000>, /* ap 12 */ + <0x0000e000 0x0001e000 0x001000>, /* ap 21 */ + <0x0000f000 0x0001f000 0x001000>; /* ap 22 */ + + gpio1_target: target-module@0 { /* 0x4a310000, ap 5 14.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio1"; + reg = <0x0 0x4>, + <0x10 0x4>, + <0x114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl OMAP4_GPIO1_CLKCTRL 0>, + <&l4_wkup_clkctrl OMAP4_GPIO1_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1000>; + + gpio1: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + ti,gpio-always-on; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@4000 { /* 0x4a314000, ap 7 18.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "wd_timer2"; + reg = <0x4000 0x4>, + <0x4010 0x4>, + <0x4014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl OMAP4_WD_TIMER2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + + wdt2: wdt@0 { + compatible = "ti,omap4-wdt", "ti,omap3-wdt"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@8000 { /* 0x4a318000, ap 9 1c.0 */ + compatible = "ti,sysc-omap2-timer", "ti,sysc"; + ti,hwmods = "timer1"; + reg = <0x8000 0x4>, + <0x8010 0x4>, + <0x8014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x1000>; + + timer1: timer@0 { + compatible = "ti,omap3430-timer"; + reg = <0x0 0x80>; + clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-alwon; + }; + }; + + target-module@c000 { /* 0x4a31c000, ap 11 20.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "kbd"; + reg = <0xc000 0x4>, + <0xc010 0x4>, + <0xc014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl OMAP4_KBD_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc000 0x1000>; + + keypad: keypad@0 { + compatible = "ti,omap4-keypad"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + reg-names = "mpu"; + }; + }; + + target-module@e000 { /* 0x4a31e000, ap 21 30.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "ctrl_module_pad_wkup"; + reg = <0xe000 0x4>, + <0xe010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xe000 0x1000>; + + omap4_pmx_wkup: pinmux@40 { + compatible = "ti,omap4-padconf", + "pinctrl-single"; + reg = <0x40 0x0038>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <1>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + }; + }; + + segment@20000 { /* 0x4a320000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00006000 0x00026000 0x001000>, /* ap 13 */ + <0x0000a000 0x0002a000 0x001000>, /* ap 14 */ + <0x00000000 0x00020000 0x001000>, /* ap 23 */ + <0x00001000 0x00021000 0x001000>, /* ap 24 */ + <0x00002000 0x00022000 0x001000>, /* ap 25 */ + <0x00003000 0x00023000 0x001000>, /* ap 26 */ + <0x00004000 0x00024000 0x001000>, /* ap 27 */ + <0x00005000 0x00025000 0x001000>, /* ap 28 */ + <0x00007000 0x00027000 0x000400>, /* ap 29 */ + <0x00008000 0x00028000 0x000800>, /* ap 30 */ + <0x00009000 0x00029000 0x000400>; /* ap 31 */ + + target-module@0 { /* 0x4a320000, ap 23 04.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1000>; + }; + + target-module@2000 { /* 0x4a322000, ap 25 0c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x1000>; + }; + + target-module@4000 { /* 0x4a324000, ap 27 10.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + }; + + target-module@6000 { /* 0x4a326000, ap 13 28.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00006000 0x00001000>, + <0x00001000 0x00007000 0x00000400>, + <0x00002000 0x00008000 0x00000800>, + <0x00003000 0x00009000 0x00000400>; + }; + }; +}; + +&l4_per { /* 0x48000000 */ + compatible = "ti,omap4-l4-per", "simple-bus"; + reg = <0x48000000 0x800>, + <0x48000800 0x800>, + <0x48001000 0x400>, + <0x48001400 0x400>, + <0x48001800 0x400>, + <0x48001c00 0x400>; + reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x48000000 0x200000>, /* segment 0 */ + <0x00200000 0x48200000 0x200000>; /* segment 1 */ + + segment@0 { /* 0x48000000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00001000 0x00001000 0x000400>, /* ap 1 */ + <0x00000800 0x00000800 0x000800>, /* ap 2 */ + <0x00020000 0x00020000 0x001000>, /* ap 3 */ + <0x00021000 0x00021000 0x001000>, /* ap 4 */ + <0x00032000 0x00032000 0x001000>, /* ap 5 */ + <0x00033000 0x00033000 0x001000>, /* ap 6 */ + <0x00034000 0x00034000 0x001000>, /* ap 7 */ + <0x00035000 0x00035000 0x001000>, /* ap 8 */ + <0x00036000 0x00036000 0x001000>, /* ap 9 */ + <0x00037000 0x00037000 0x001000>, /* ap 10 */ + <0x0003e000 0x0003e000 0x001000>, /* ap 11 */ + <0x0003f000 0x0003f000 0x001000>, /* ap 12 */ + <0x00040000 0x00040000 0x010000>, /* ap 13 */ + <0x00050000 0x00050000 0x001000>, /* ap 14 */ + <0x00055000 0x00055000 0x001000>, /* ap 15 */ + <0x00056000 0x00056000 0x001000>, /* ap 16 */ + <0x00057000 0x00057000 0x001000>, /* ap 17 */ + <0x00058000 0x00058000 0x001000>, /* ap 18 */ + <0x00059000 0x00059000 0x001000>, /* ap 19 */ + <0x0005a000 0x0005a000 0x001000>, /* ap 20 */ + <0x0005b000 0x0005b000 0x001000>, /* ap 21 */ + <0x0005c000 0x0005c000 0x001000>, /* ap 22 */ + <0x0005d000 0x0005d000 0x001000>, /* ap 23 */ + <0x0005e000 0x0005e000 0x001000>, /* ap 24 */ + <0x00060000 0x00060000 0x001000>, /* ap 25 */ + <0x0006a000 0x0006a000 0x001000>, /* ap 26 */ + <0x0006b000 0x0006b000 0x001000>, /* ap 27 */ + <0x0006c000 0x0006c000 0x001000>, /* ap 28 */ + <0x0006d000 0x0006d000 0x001000>, /* ap 29 */ + <0x0006e000 0x0006e000 0x001000>, /* ap 30 */ + <0x0006f000 0x0006f000 0x001000>, /* ap 31 */ + <0x00070000 0x00070000 0x001000>, /* ap 32 */ + <0x00071000 0x00071000 0x001000>, /* ap 33 */ + <0x00072000 0x00072000 0x001000>, /* ap 34 */ + <0x00073000 0x00073000 0x001000>, /* ap 35 */ + <0x00061000 0x00061000 0x001000>, /* ap 36 */ + <0x00096000 0x00096000 0x001000>, /* ap 37 */ + <0x00097000 0x00097000 0x001000>, /* ap 38 */ + <0x00076000 0x00076000 0x001000>, /* ap 39 */ + <0x00077000 0x00077000 0x001000>, /* ap 40 */ + <0x00078000 0x00078000 0x001000>, /* ap 41 */ + <0x00079000 0x00079000 0x001000>, /* ap 42 */ + <0x00086000 0x00086000 0x001000>, /* ap 43 */ + <0x00087000 0x00087000 0x001000>, /* ap 44 */ + <0x00088000 0x00088000 0x001000>, /* ap 45 */ + <0x00089000 0x00089000 0x001000>, /* ap 46 */ + <0x000b0000 0x000b0000 0x001000>, /* ap 47 */ + <0x000b1000 0x000b1000 0x001000>, /* ap 48 */ + <0x00098000 0x00098000 0x001000>, /* ap 49 */ + <0x00099000 0x00099000 0x001000>, /* ap 50 */ + <0x0009a000 0x0009a000 0x001000>, /* ap 51 */ + <0x0009b000 0x0009b000 0x001000>, /* ap 52 */ + <0x0009c000 0x0009c000 0x001000>, /* ap 53 */ + <0x0009d000 0x0009d000 0x001000>, /* ap 54 */ + <0x0009e000 0x0009e000 0x001000>, /* ap 55 */ + <0x0009f000 0x0009f000 0x001000>, /* ap 56 */ + <0x00090000 0x00090000 0x002000>, /* ap 57 */ + <0x00092000 0x00092000 0x001000>, /* ap 58 */ + <0x000a4000 0x000a4000 0x001000>, /* ap 59 */ + <0x000a6000 0x000a6000 0x001000>, /* ap 60 */ + <0x000a8000 0x000a8000 0x004000>, /* ap 61 */ + <0x000ac000 0x000ac000 0x001000>, /* ap 62 */ + <0x000ad000 0x000ad000 0x001000>, /* ap 63 */ + <0x000ae000 0x000ae000 0x001000>, /* ap 64 */ + <0x000b2000 0x000b2000 0x001000>, /* ap 65 */ + <0x000b3000 0x000b3000 0x001000>, /* ap 66 */ + <0x000b4000 0x000b4000 0x001000>, /* ap 67 */ + <0x000b5000 0x000b5000 0x001000>, /* ap 68 */ + <0x000b8000 0x000b8000 0x001000>, /* ap 69 */ + <0x000b9000 0x000b9000 0x001000>, /* ap 70 */ + <0x000ba000 0x000ba000 0x001000>, /* ap 71 */ + <0x000bb000 0x000bb000 0x001000>, /* ap 72 */ + <0x000d1000 0x000d1000 0x001000>, /* ap 73 */ + <0x000d2000 0x000d2000 0x001000>, /* ap 74 */ + <0x000d5000 0x000d5000 0x001000>, /* ap 75 */ + <0x000d6000 0x000d6000 0x001000>, /* ap 76 */ + <0x000a2000 0x000a2000 0x001000>, /* ap 79 */ + <0x000a3000 0x000a3000 0x001000>, /* ap 80 */ + <0x00001400 0x00001400 0x000400>, /* ap 81 */ + <0x00001800 0x00001800 0x000400>, /* ap 82 */ + <0x00001c00 0x00001c00 0x000400>, /* ap 83 */ + <0x000a5000 0x000a5000 0x001000>; /* ap 84 */ + + target-module@20000 { /* 0x48020000, ap 3 06.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart3"; + reg = <0x20050 0x4>, + <0x20054 0x4>, + <0x20058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_UART3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20000 0x1000>; + + uart3: serial@0 { + compatible = "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + }; + }; + + target-module@32000 { /* 0x48032000, ap 5 02.0 */ + compatible = "ti,sysc-omap2-timer", "ti,sysc"; + ti,hwmods = "timer2"; + reg = <0x32000 0x4>, + <0x32010 0x4>, + <0x32014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_TIMER2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x32000 0x1000>; + + timer2: timer@0 { + compatible = "ti,omap3430-timer"; + reg = <0x0 0x80>; + clocks = <&l4_per_clkctrl OMAP4_TIMER2_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@34000 { /* 0x48034000, ap 7 04.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer3"; + reg = <0x34000 0x4>, + <0x34010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_TIMER3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x34000 0x1000>; + + timer3: timer@0 { + compatible = "ti,omap4430-timer"; + reg = <0x0 0x80>; + clocks = <&l4_per_clkctrl OMAP4_TIMER3_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@36000 { /* 0x48036000, ap 9 0e.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer4"; + reg = <0x36000 0x4>, + <0x36010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_TIMER4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x36000 0x1000>; + + timer4: timer@0 { + compatible = "ti,omap4430-timer"; + reg = <0x0 0x80>; + clocks = <&l4_per_clkctrl OMAP4_TIMER4_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@3e000 { /* 0x4803e000, ap 11 08.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer9"; + reg = <0x3e000 0x4>, + <0x3e010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3e000 0x1000>; + + timer9: timer@0 { + compatible = "ti,omap4430-timer"; + reg = <0x0 0x80>; + clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + }; + }; + + target-module@40000 { /* 0x48040000, ap 13 0a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x40000 0x10000>; + }; + + target-module@55000 { /* 0x48055000, ap 15 0c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio2"; + reg = <0x55000 0x4>, + <0x55010 0x4>, + <0x55114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_GPIO2_CLKCTRL 0>, + <&l4_per_clkctrl OMAP4_GPIO2_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x55000 0x1000>; + + gpio2: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@57000 { /* 0x48057000, ap 17 16.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio3"; + reg = <0x57000 0x4>, + <0x57010 0x4>, + <0x57114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_GPIO3_CLKCTRL 0>, + <&l4_per_clkctrl OMAP4_GPIO3_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x57000 0x1000>; + + gpio3: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@59000 { /* 0x48059000, ap 19 10.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio4"; + reg = <0x59000 0x4>, + <0x59010 0x4>, + <0x59114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_GPIO4_CLKCTRL 0>, + <&l4_per_clkctrl OMAP4_GPIO4_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x59000 0x1000>; + + gpio4: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@5b000 { /* 0x4805b000, ap 21 12.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio5"; + reg = <0x5b000 0x4>, + <0x5b010 0x4>, + <0x5b114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_GPIO5_CLKCTRL 0>, + <&l4_per_clkctrl OMAP4_GPIO5_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5b000 0x1000>; + + gpio5: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@5d000 { /* 0x4805d000, ap 23 14.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio6"; + reg = <0x5d000 0x4>, + <0x5d010 0x4>, + <0x5d114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_GPIO6_CLKCTRL 0>, + <&l4_per_clkctrl OMAP4_GPIO6_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5d000 0x1000>; + + gpio6: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@60000 { /* 0x48060000, ap 25 1e.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c3"; + reg = <0x60000 0x8>, + <0x60010 0x8>, + <0x60090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_I2C3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x60000 0x1000>; + + i2c3: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + target-module@6a000 { /* 0x4806a000, ap 26 18.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart1"; + reg = <0x6a050 0x4>, + <0x6a054 0x4>, + <0x6a058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_UART1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6a000 0x1000>; + + uart1: serial@0 { + compatible = "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + }; + }; + + target-module@6c000 { /* 0x4806c000, ap 28 20.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart2"; + reg = <0x6c050 0x4>, + <0x6c054 0x4>, + <0x6c058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_UART2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6c000 0x1000>; + + uart2: serial@0 { + compatible = "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + }; + }; + + target-module@6e000 { /* 0x4806e000, ap 30 1c.1 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart4"; + reg = <0x6e050 0x4>, + <0x6e054 0x4>, + <0x6e058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_UART4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6e000 0x1000>; + + uart4: serial@0 { + compatible = "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + }; + }; + + target-module@70000 { /* 0x48070000, ap 32 28.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c1"; + reg = <0x70000 0x8>, + <0x70010 0x8>, + <0x70090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_I2C1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x70000 0x1000>; + + i2c1: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + target-module@72000 { /* 0x48072000, ap 34 30.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c2"; + reg = <0x72000 0x8>, + <0x72010 0x8>, + <0x72090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_I2C2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x72000 0x1000>; + + i2c2: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + target-module@76000 { /* 0x48076000, ap 39 38.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "slimbus2"; + reg = <0x76000 0x4>, + <0x76010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_SLIMBUS2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x76000 0x1000>; + + /* No child device binding or driver in mainline */ + }; + + target-module@78000 { /* 0x48078000, ap 41 1a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "elm"; + reg = <0x78000 0x4>, + <0x78010 0x4>, + <0x78014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_ELM_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x78000 0x1000>; + + elm: elm@0 { + compatible = "ti,am3352-elm"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@86000 { /* 0x48086000, ap 43 24.0 */ + compatible = "ti,sysc-omap2-timer", "ti,sysc"; + ti,hwmods = "timer10"; + reg = <0x86000 0x4>, + <0x86010 0x4>, + <0x86014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_TIMER10_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x86000 0x1000>; + + timer10: timer@0 { + compatible = "ti,omap3430-timer"; + reg = <0x0 0x80>; + clocks = <&l4_per_clkctrl OMAP4_TIMER10_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + }; + }; + + target-module@88000 { /* 0x48088000, ap 45 2e.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer11"; + reg = <0x88000 0x4>, + <0x88010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_TIMER11_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x88000 0x1000>; + + timer11: timer@0 { + compatible = "ti,omap4430-timer"; + reg = <0x0 0x80>; + clocks = <&l4_per_clkctrl OMAP4_TIMER11_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + }; + }; + + target-module@90000 { /* 0x48090000, ap 57 2a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x90000 0x2000>; + }; + + target-module@96000 { /* 0x48096000, ap 37 26.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "mcbsp4"; + reg = <0x9608c 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_MCBSP4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x96000 0x1000>; + + mcbsp4: mcbsp@0 { + compatible = "ti,omap4-mcbsp"; + reg = <0x0 0xff>; /* L4 Interconnect */ + reg-names = "mpu"; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "common"; + ti,buffer-size = <128>; + dmas = <&sdma 31>, + <&sdma 32>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + }; + + target-module@98000 { /* 0x48098000, ap 49 22.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mcspi1"; + reg = <0x98000 0x4>, + <0x98010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_MCSPI1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x98000 0x1000>; + + mcspi1: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <4>; + dmas = <&sdma 35>, + <&sdma 36>, + <&sdma 37>, + <&sdma 38>, + <&sdma 39>, + <&sdma 40>, + <&sdma 41>, + <&sdma 42>; + dma-names = "tx0", "rx0", "tx1", "rx1", + "tx2", "rx2", "tx3", "rx3"; + }; + }; + + target-module@9a000 { /* 0x4809a000, ap 51 2c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mcspi2"; + reg = <0x9a000 0x4>, + <0x9a010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_MCSPI2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x9a000 0x1000>; + + mcspi2: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <2>; + dmas = <&sdma 43>, + <&sdma 44>, + <&sdma 45>, + <&sdma 46>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + }; + }; + + target-module@9c000 { /* 0x4809c000, ap 53 36.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mmc1"; + reg = <0x9c000 0x4>, + <0x9c010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ + clocks = <&l3_init_clkctrl OMAP4_MMC1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x9c000 0x1000>; + + mmc1: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + ti,dual-volt; + ti,needs-special-reset; + dmas = <&sdma 61>, <&sdma 62>; + dma-names = "tx", "rx"; + pbias-supply = <&pbias_mmc_reg>; + }; + }; + + target-module@9e000 { /* 0x4809e000, ap 55 48.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x9e000 0x1000>; + }; + + target-module@a2000 { /* 0x480a2000, ap 79 3a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa2000 0x1000>; + }; + + target-module@a4000 { /* 0x480a4000, ap 59 34.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x000a4000 0x00001000>, + <0x00001000 0x000a5000 0x00001000>; + }; + + target-module@a8000 { /* 0x480a8000, ap 61 3e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa8000 0x4000>; + }; + + target-module@ad000 { /* 0x480ad000, ap 63 50.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mmc3"; + reg = <0xad000 0x4>, + <0xad010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_MMC3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xad000 0x1000>; + + mmc3: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + ti,needs-special-reset; + dmas = <&sdma 77>, <&sdma 78>; + dma-names = "tx", "rx"; + }; + }; + + target-module@b0000 { /* 0x480b0000, ap 47 40.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb0000 0x1000>; + }; + + target-module@b2000 { /* 0x480b2000, ap 65 3c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "hdq1w"; + reg = <0xb2000 0x4>, + <0xb2014 0x4>, + <0xb2018 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + ti,no-reset-on-init; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_HDQ1W_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb2000 0x1000>; + + hdqw1w: 1w@0 { + compatible = "ti,omap3-1w"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@b4000 { /* 0x480b4000, ap 67 46.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mmc2"; + reg = <0xb4000 0x4>, + <0xb4010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ + clocks = <&l3_init_clkctrl OMAP4_MMC2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb4000 0x1000>; + + mmc2: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + ti,needs-special-reset; + dmas = <&sdma 47>, <&sdma 48>; + dma-names = "tx", "rx"; + }; + }; + + target-module@b8000 { /* 0x480b8000, ap 69 58.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mcspi3"; + reg = <0xb8000 0x4>, + <0xb8010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_MCSPI3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb8000 0x1000>; + + mcspi3: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <2>; + dmas = <&sdma 15>, <&sdma 16>; + dma-names = "tx0", "rx0"; + }; + }; + + target-module@ba000 { /* 0x480ba000, ap 71 32.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mcspi4"; + reg = <0xba000 0x4>, + <0xba010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_MCSPI4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xba000 0x1000>; + + mcspi4: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <1>; + dmas = <&sdma 70>, <&sdma 71>; + dma-names = "tx0", "rx0"; + }; + }; + + target-module@d1000 { /* 0x480d1000, ap 73 44.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mmc4"; + reg = <0xd1000 0x4>, + <0xd1010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_MMC4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd1000 0x1000>; + + mmc4: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + ti,needs-special-reset; + dmas = <&sdma 57>, <&sdma 58>; + dma-names = "tx", "rx"; + }; + }; + + target-module@d5000 { /* 0x480d5000, ap 75 4e.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mmc5"; + reg = <0xd5000 0x4>, + <0xd5010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_MMC5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd5000 0x1000>; + + mmc5: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + ti,needs-special-reset; + dmas = <&sdma 59>, <&sdma 60>; + dma-names = "tx", "rx"; + }; + }; + }; + + segment@200000 { /* 0x48200000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00150000 0x00350000 0x001000>, /* ap 77 */ + <0x00151000 0x00351000 0x001000>; /* ap 78 */ + + target-module@150000 { /* 0x48350000, ap 77 4c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c4"; + reg = <0x150000 0x8>, + <0x150010 0x8>, + <0x150090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_I2C4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x150000 0x1000>; + + i2c4: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; +}; + diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 5501d1b4e6cd..27895c1604b9 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -5,6 +5,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <dt-bindings/input/input.h> #include "elpida_ecb240abacn.dtsi" / { @@ -43,6 +44,21 @@ }; }; + gpio_keys: gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = < + &button_pins + >; + + buttonS2 { + label = "button S2"; + gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; /* gpio_121 */ + linux,code = <BTN_0>; + wakeup-source; + }; + }; + sound: sound { compatible = "ti,abe-twl6040"; ti,model = "PandaBoard"; @@ -357,6 +373,12 @@ OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */ >; }; + + button_pins: pinmux_button_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_121 */ + >; + }; }; &omap4_pmx_wkup { @@ -464,7 +486,7 @@ compatible = "ti,wl1271"; reg = <2>; interrupt-parent = <&gpio2>; - interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */ + interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 53 */ ref-clock-frequency = <38400000>; }; }; diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts index 940fe4f7c5f6..19d02df8d8a5 100644 --- a/arch/arm/boot/dts/omap4-panda-es.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -46,6 +46,12 @@ OMAP4_IOPAD(0x0f6, PIN_OUTPUT | MUX_MODE3) /* gpio_110 */ >; }; + + button_pins: pinmux_button_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x11b, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */ + >; + }; }; &led_wkgpio_pins { @@ -68,6 +74,12 @@ }; }; -&gpio1 { +&gpio_keys { + buttonS2 { + gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* gpio_113 */ + }; +}; + +&gpio1_target { ti,no-reset-on-init; }; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 280d92d42bf1..490726b52216 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -493,7 +493,7 @@ compatible = "ti,wl1281"; reg = <2>; interrupt-parent = <&gpio1>; - interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */ + interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 53 */ ref-clock-frequency = <26000000>; tcxo-clock-frequency = <26000000>; }; diff --git a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi index 1c5f6f35e1cf..878923473023 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi @@ -72,7 +72,7 @@ compatible = "ti,wl1271"; reg = <2>; interrupt-parent = <&gpio2>; - interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; /* gpio 41 */ + interrupts = <9 IRQ_TYPE_EDGE_RISING>; /* gpio 41 */ ref-clock-frequency = <38400000>; }; }; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index e554b6e039f3..1a96d4317c97 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -139,174 +139,13 @@ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - l4_cfg: l4@4a000000 { - compatible = "ti,omap4-l4-cfg", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4a000000 0x1000000>; - - cm1: cm1@4000 { - compatible = "ti,omap4-cm1", "simple-bus"; - reg = <0x4000 0x2000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4000 0x2000>; - - cm1_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - cm1_clockdomains: clockdomains { - }; - }; - - cm2: cm2@8000 { - compatible = "ti,omap4-cm2", "simple-bus"; - reg = <0x8000 0x2000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x8000 0x2000>; - - cm2_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - cm2_clockdomains: clockdomains { - }; - }; - - omap4_scm_core: scm@2000 { - compatible = "ti,omap4-scm-core", "simple-bus"; - reg = <0x2000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x2000 0x1000>; - ti,hwmods = "ctrl_module_core"; - - scm_conf: scm_conf@0 { - compatible = "syscon"; - reg = <0x0 0x800>; - #address-cells = <1>; - #size-cells = <1>; - }; - }; - - omap4_padconf_core: scm@100000 { - compatible = "ti,omap4-scm-padconf-core", - "simple-bus"; - reg = <0x100000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x100000 0x1000>; - ti,hwmods = "ctrl_module_pad_core"; - - omap4_pmx_core: pinmux@40 { - compatible = "ti,omap4-padconf", - "pinctrl-single"; - reg = <0x40 0x0196>; - #address-cells = <1>; - #size-cells = <0>; - #pinctrl-cells = <1>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; - }; - - omap4_padconf_global: omap4_padconf_global@5a0 { - compatible = "syscon", - "simple-bus"; - reg = <0x5a0 0x170>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x5a0 0x170>; - - pbias_regulator: pbias_regulator@60 { - compatible = "ti,pbias-omap4", "ti,pbias-omap"; - reg = <0x60 0x4>; - syscon = <&omap4_padconf_global>; - pbias_mmc_reg: pbias_mmc_omap4 { - regulator-name = "pbias_mmc_omap4"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - }; - }; - }; - }; - - l4_wkup: l4@300000 { - compatible = "ti,omap4-l4-wkup", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x300000 0x40000>; - - counter32k: counter@4000 { - compatible = "ti,omap-counter32k"; - reg = <0x4000 0x20>; - ti,hwmods = "counter_32k"; - }; - - prm: prm@6000 { - compatible = "ti,omap4-prm"; - reg = <0x6000 0x2000>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x6000 0x2000>; - - prm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - prm_clockdomains: clockdomains { - }; - }; - - scrm: scrm@a000 { - compatible = "ti,omap4-scrm"; - reg = <0xa000 0x2000>; - - scrm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - scrm_clockdomains: clockdomains { - }; - }; - - omap4_scm_wkup: scm@c000 { - compatible = "ti,omap4-scm-wkup"; - reg = <0xc000 0x1000>; - ti,hwmods = "ctrl_module_wkup"; - }; + l4_wkup: interconnect@4a300000 { + }; - omap4_padconf_wkup: padconf@1e000 { - compatible = "ti,omap4-scm-padconf-wkup", - "simple-bus"; - reg = <0x1e000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x1e000 0x1000>; - ti,hwmods = "ctrl_module_pad_wkup"; + l4_cfg: interconnect@4a000000 { + }; - omap4_pmx_wkup: pinmux@40 { - compatible = "ti,omap4-padconf", - "pinctrl-single"; - reg = <0x40 0x0038>; - #address-cells = <1>; - #size-cells = <0>; - #pinctrl-cells = <1>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; - }; - }; - }; + l4_per: interconnect@48000000 { }; ocmcram: ocmcram@40304000 { @@ -314,114 +153,6 @@ reg = <0x40304000 0xa000>; /* 40k */ }; - sdma: dma-controller@4a056000 { - compatible = "ti,omap4430-sdma"; - reg = <0x4a056000 0x1000>; - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - dma-channels = <32>; - dma-requests = <127>; - ti,hwmods = "dma_system"; - }; - - gpio1: gpio@4a310000 { - compatible = "ti,omap4-gpio"; - reg = <0x4a310000 0x200>; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio1"; - ti,gpio-always-on; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio2: gpio@48055000 { - compatible = "ti,omap4-gpio"; - reg = <0x48055000 0x200>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio2"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio3: gpio@48057000 { - compatible = "ti,omap4-gpio"; - reg = <0x48057000 0x200>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio3"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio4: gpio@48059000 { - compatible = "ti,omap4-gpio"; - reg = <0x48059000 0x200>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio4"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio5: gpio@4805b000 { - compatible = "ti,omap4-gpio"; - reg = <0x4805b000 0x200>; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio5"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio6: gpio@4805d000 { - compatible = "ti,omap4-gpio"; - reg = <0x4805d000 0x200>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio6"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - target-module@48076000 { - compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "slimbus2"; - reg = <0x48076000 0x4>, - <0x48076010 0x4>; - reg-names = "rev", "sysc"; - ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - clocks = <&l4_per_clkctrl OMAP4_SLIMBUS2_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x48076000 0x001000>; - - /* No child device binding or driver in mainline */ - }; - - elm: elm@48078000 { - compatible = "ti,am3352-elm"; - reg = <0x48078000 0x2000>; - interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "elm"; - status = "disabled"; - }; - gpmc: gpmc@50000000 { compatible = "ti,omap4430-gpmc"; reg = <0x50000000 0x1000>; @@ -442,302 +173,6 @@ #gpio-cells = <2>; }; - uart1: serial@4806a000 { - compatible = "ti,omap4-uart"; - reg = <0x4806a000 0x100>; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart1"; - clock-frequency = <48000000>; - }; - - uart2: serial@4806c000 { - compatible = "ti,omap4-uart"; - reg = <0x4806c000 0x100>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart2"; - clock-frequency = <48000000>; - }; - - uart3: serial@48020000 { - compatible = "ti,omap4-uart"; - reg = <0x48020000 0x100>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart3"; - clock-frequency = <48000000>; - }; - - uart4: serial@4806e000 { - compatible = "ti,omap4-uart"; - reg = <0x4806e000 0x100>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart4"; - clock-frequency = <48000000>; - }; - - target-module@4a0db000 { - compatible = "ti,sysc-omap4-sr", "ti,sysc"; - ti,hwmods = "smartreflex_iva"; - reg = <0x4a0db038 0x4>; - reg-names = "sysc"; - ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_IVA_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4a0db000 0x001000>; - - smartreflex_iva: smartreflex@0 { - compatible = "ti,omap4-smartreflex-iva"; - reg = <0 0x80>; - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - - target-module@4a0dd000 { - compatible = "ti,sysc-omap4-sr", "ti,sysc"; - ti,hwmods = "smartreflex_core"; - reg = <0x4a0dd038 0x4>; - reg-names = "sysc"; - ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_CORE_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4a0dd000 0x001000>; - - smartreflex_core: smartreflex@0 { - compatible = "ti,omap4-smartreflex-core"; - reg = <0 0x80>; - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - - target-module@4a0d9000 { - compatible = "ti,sysc-omap4-sr", "ti,sysc"; - ti,hwmods = "smartreflex_mpu"; - reg = <0x4a0d9038 0x4>; - reg-names = "sysc"; - ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_MPU_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4a0d9000 0x001000>; - - smartreflex_mpu: smartreflex@0 { - compatible = "ti,omap4-smartreflex-mpu"; - reg = <0 0x80>; - interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - - hwspinlock: spinlock@4a0f6000 { - compatible = "ti,omap4-hwspinlock"; - reg = <0x4a0f6000 0x1000>; - ti,hwmods = "spinlock"; - #hwlock-cells = <1>; - }; - - i2c1: i2c@48070000 { - compatible = "ti,omap4-i2c"; - reg = <0x48070000 0x100>; - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c1"; - }; - - i2c2: i2c@48072000 { - compatible = "ti,omap4-i2c"; - reg = <0x48072000 0x100>; - interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c2"; - }; - - i2c3: i2c@48060000 { - compatible = "ti,omap4-i2c"; - reg = <0x48060000 0x100>; - interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c3"; - }; - - i2c4: i2c@48350000 { - compatible = "ti,omap4-i2c"; - reg = <0x48350000 0x100>; - interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c4"; - }; - - mcspi1: spi@48098000 { - compatible = "ti,omap4-mcspi"; - reg = <0x48098000 0x200>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "mcspi1"; - ti,spi-num-cs = <4>; - dmas = <&sdma 35>, - <&sdma 36>, - <&sdma 37>, - <&sdma 38>, - <&sdma 39>, - <&sdma 40>, - <&sdma 41>, - <&sdma 42>; - dma-names = "tx0", "rx0", "tx1", "rx1", - "tx2", "rx2", "tx3", "rx3"; - }; - - mcspi2: spi@4809a000 { - compatible = "ti,omap4-mcspi"; - reg = <0x4809a000 0x200>; - interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "mcspi2"; - ti,spi-num-cs = <2>; - dmas = <&sdma 43>, - <&sdma 44>, - <&sdma 45>, - <&sdma 46>; - dma-names = "tx0", "rx0", "tx1", "rx1"; - }; - - hdqw1w: 1w@480b2000 { - compatible = "ti,omap3-1w"; - reg = <0x480b2000 0x1000>; - interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "hdq1w"; - }; - - mcspi3: spi@480b8000 { - compatible = "ti,omap4-mcspi"; - reg = <0x480b8000 0x200>; - interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "mcspi3"; - ti,spi-num-cs = <2>; - dmas = <&sdma 15>, <&sdma 16>; - dma-names = "tx0", "rx0"; - }; - - mcspi4: spi@480ba000 { - compatible = "ti,omap4-mcspi"; - reg = <0x480ba000 0x200>; - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "mcspi4"; - ti,spi-num-cs = <1>; - dmas = <&sdma 70>, <&sdma 71>; - dma-names = "tx0", "rx0"; - }; - - mmc1: mmc@4809c000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x4809c000 0x400>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc1"; - ti,dual-volt; - ti,needs-special-reset; - dmas = <&sdma 61>, <&sdma 62>; - dma-names = "tx", "rx"; - pbias-supply = <&pbias_mmc_reg>; - }; - - mmc2: mmc@480b4000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x480b4000 0x400>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc2"; - ti,needs-special-reset; - dmas = <&sdma 47>, <&sdma 48>; - dma-names = "tx", "rx"; - }; - - mmc3: mmc@480ad000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x480ad000 0x400>; - interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc3"; - ti,needs-special-reset; - dmas = <&sdma 77>, <&sdma 78>; - dma-names = "tx", "rx"; - }; - - mmc4: mmc@480d1000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x480d1000 0x400>; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc4"; - ti,needs-special-reset; - dmas = <&sdma 57>, <&sdma 58>; - dma-names = "tx", "rx"; - }; - - mmc5: mmc@480d5000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x480d5000 0x400>; - interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc5"; - ti,needs-special-reset; - dmas = <&sdma 59>, <&sdma 60>; - dma-names = "tx", "rx"; - }; - - hsi: hsi@4a058000 { - compatible = "ti,omap4-hsi"; - reg = <0x4a058000 0x4000>, - <0x4a05c000 0x1000>; - reg-names = "sys", "gdd"; - ti,hwmods = "hsi"; - - clocks = <&l3_init_clkctrl OMAP4_HSI_CLKCTRL 0>; - clock-names = "hsi_fck"; - - interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "gdd_mpu"; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4a058000 0x4000>; - - hsi_port1: hsi-port@2000 { - compatible = "ti,omap4-hsi-port"; - reg = <0x2000 0x800>, - <0x2800 0x800>; - reg-names = "tx", "rx"; - interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; - }; - - hsi_port2: hsi-port@3000 { - compatible = "ti,omap4-hsi-port"; - reg = <0x3000 0x800>, - <0x3800 0x800>; - reg-names = "tx", "rx"; - interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - mmu_dsp: mmu@4a066000 { compatible = "ti,omap4-iommu"; reg = <0x4a066000 0x100>; @@ -779,20 +214,33 @@ #iommu-cells = <0>; ti,iommu-bus-err-back; }; - - wdt2: wdt@4a314000 { - compatible = "ti,omap4-wdt", "ti,omap3-wdt"; - reg = <0x4a314000 0x80>; - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "wd_timer2"; - }; - - wdt3: wdt@40130000 { - compatible = "ti,omap4-wdt", "ti,omap3-wdt"; - reg = <0x40130000 0x80>, /* MPU private access */ - <0x49030000 0x80>; /* L3 Interconnect */ - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + target-module@40130000 { + compatible = "ti,sysc-omap2", "ti,sysc"; ti,hwmods = "wd_timer3"; + reg = <0x40130000 0x4>, + <0x40130010 0x4>, + <0x40130014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): abe, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_WD_TIMER3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x40130000 0x1000>, /* MPU private access */ + <0x49030000 0x49030000 0x0080>; /* L3 Interconnect */ + + wdt3: wdt@0 { + compatible = "ti,omap4-wdt", "ti,omap3-wdt"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + }; }; mcpdm: mcpdm@40132000 { @@ -938,28 +386,6 @@ */ }; - mcbsp4: mcbsp@48096000 { - compatible = "ti,omap4-mcbsp"; - reg = <0x48096000 0xff>; /* L4 Interconnect */ - reg-names = "mpu"; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "common"; - ti,buffer-size = <128>; - ti,hwmods = "mcbsp4"; - dmas = <&sdma 31>, - <&sdma 32>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - keypad: keypad@4a31c000 { - compatible = "ti,omap4-keypad"; - reg = <0x4a31c000 0x80>; - interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; - reg-names = "mpu"; - ti,hwmods = "kbd"; - }; - dmm@4e000000 { compatible = "ti,omap4-dmm"; reg = <0x4e000000 0x800>; @@ -991,95 +417,6 @@ hw-caps-temp-alert; }; - ocp2scp@4a0ad000 { - compatible = "ti,omap-ocp2scp"; - reg = <0x4a0ad000 0x1f>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - ti,hwmods = "ocp2scp_usb_phy"; - usb2_phy: usb2phy@4a0ad080 { - compatible = "ti,omap-usb2"; - reg = <0x4a0ad080 0x58>; - ctrl-module = <&omap_control_usb2phy>; - clocks = <&usb_phy_cm_clk32k>; - clock-names = "wkupclk"; - #phy-cells = <0>; - }; - }; - - mailbox: mailbox@4a0f4000 { - compatible = "ti,omap4-mailbox"; - reg = <0x4a0f4000 0x200>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox"; - #mbox-cells = <1>; - ti,mbox-num-users = <3>; - ti,mbox-num-fifos = <8>; - mbox_ipu: mbox_ipu { - ti,mbox-tx = <0 0 0>; - ti,mbox-rx = <1 0 0>; - }; - mbox_dsp: mbox_dsp { - ti,mbox-tx = <3 0 0>; - ti,mbox-rx = <2 0 0>; - }; - }; - - target-module@4a10a000 { - compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "fdif"; - reg = <0x4a10a000 0x4>, - <0x4a10a010 0x4>; - reg-names = "rev", "sysc"; - ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; - ti,sysc-midle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>; - ti,sysc-delay-us = <2>; - clocks = <&iss_clkctrl OMAP4_FDIF_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4a10a000 0x1000>; - - /* No child device binding or driver in mainline */ - }; - - timer1: timer@4a318000 { - compatible = "ti,omap3430-timer"; - reg = <0x4a318000 0x80>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer1"; - ti,timer-alwon; - clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 24>; - clock-names = "fck"; - }; - - timer2: timer@48032000 { - compatible = "ti,omap3430-timer"; - reg = <0x48032000 0x80>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer2"; - }; - - timer3: timer@48034000 { - compatible = "ti,omap4430-timer"; - reg = <0x48034000 0x80>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer3"; - }; - - timer4: timer@48036000 { - compatible = "ti,omap4430-timer"; - reg = <0x48036000 0x80>; - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer4"; - }; - timer5: timer@40138000 { compatible = "ti,omap4430-timer"; reg = <0x40138000 0x80>, @@ -1117,92 +454,6 @@ ti,timer-dsp; }; - timer9: timer@4803e000 { - compatible = "ti,omap4430-timer"; - reg = <0x4803e000 0x80>; - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer9"; - ti,timer-pwm; - }; - - timer10: timer@48086000 { - compatible = "ti,omap3430-timer"; - reg = <0x48086000 0x80>; - interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer10"; - ti,timer-pwm; - }; - - timer11: timer@48088000 { - compatible = "ti,omap4430-timer"; - reg = <0x48088000 0x80>; - interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer11"; - ti,timer-pwm; - }; - - usbhstll: usbhstll@4a062000 { - compatible = "ti,usbhs-tll"; - reg = <0x4a062000 0x1000>; - interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "usb_tll_hs"; - }; - - usbhshost: usbhshost@4a064000 { - compatible = "ti,usbhs-host"; - reg = <0x4a064000 0x800>; - ti,hwmods = "usb_host_hs"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clocks = <&init_60m_fclk>, - <&xclk60mhsp1_ck>, - <&xclk60mhsp2_ck>; - clock-names = "refclk_60m_int", - "refclk_60m_ext_p1", - "refclk_60m_ext_p2"; - - usbhsohci: ohci@4a064800 { - compatible = "ti,ohci-omap3"; - reg = <0x4a064800 0x400>; - interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - remote-wakeup-connected; - }; - - usbhsehci: ehci@4a064c00 { - compatible = "ti,ehci-omap"; - reg = <0x4a064c00 0x400>; - interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - - omap_control_usb2phy: control-phy@4a002300 { - compatible = "ti,control-phy-usb2"; - reg = <0x4a002300 0x4>; - reg-names = "power"; - }; - - omap_control_usbotg: control-phy@4a00233c { - compatible = "ti,control-phy-otghs"; - reg = <0x4a00233c 0x4>; - reg-names = "otghs_control"; - }; - - usb_otg_hs: usb_otg_hs@4a0ab000 { - compatible = "ti,omap4-musb"; - reg = <0x4a0ab000 0x7ff>; - interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "mc", "dma"; - ti,hwmods = "usb_otg_hs"; - usb-phy = <&usb2_phy>; - phys = <&usb2_phy>; - phy-names = "usb2-phy"; - multipoint = <1>; - num-eps = <16>; - ram-bits = <12>; - ctrl-module = <&omap_control_usbotg>; - }; - aes1: aes@4b501000 { compatible = "ti,omap4-aes"; ti,hwmods = "aes1"; @@ -1377,4 +628,5 @@ }; }; +#include "omap4-l4.dtsi" #include "omap44xx-clocks.dtsi" diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi index ad97493e4e46..2223dc0d63c0 100644 --- a/arch/arm/boot/dts/omap4460.dtsi +++ b/arch/arm/boot/dts/omap4460.dtsi @@ -92,4 +92,40 @@ coefficients = <348 (-9301)>; }; +/* Only some L4 CFG interconnect ranges are different on 4460 */ +&l4_cfg_segment_300000 { + ranges = <0x00000000 0x00300000 0x020000>, /* ap 67 */ + <0x00040000 0x00340000 0x001000>, /* ap 68 */ + <0x00020000 0x00320000 0x004000>, /* ap 71 */ + <0x00024000 0x00324000 0x002000>, /* ap 72 */ + <0x00026000 0x00326000 0x001000>, /* ap 73 */ + <0x00027000 0x00327000 0x001000>, /* ap 74 */ + <0x00028000 0x00328000 0x001000>, /* ap 75 */ + <0x00029000 0x00329000 0x001000>, /* ap 76 */ + <0x00030000 0x00330000 0x010000>, /* ap 77 */ + <0x0002a000 0x0032a000 0x002000>, /* ap 90 */ + <0x0002c000 0x0032c000 0x004000>, /* ap 91 */ + <0x00010000 0x00310000 0x008000>, /* ap 92 */ + <0x00018000 0x00318000 0x004000>, /* ap 93 */ + <0x0001c000 0x0031c000 0x002000>, /* ap 94 */ + <0x0001e000 0x0031e000 0x002000>; /* ap 95 */ +}; + +&l4_cfg_target_0 { + ranges = <0x00000000 0x00000000 0x00010000>, + <0x00010000 0x00010000 0x00008000>, + <0x00018000 0x00018000 0x00004000>, + <0x0001c000 0x0001c000 0x00002000>, + <0x0001e000 0x0001e000 0x00002000>, + <0x00020000 0x00020000 0x00004000>, + <0x00024000 0x00024000 0x00002000>, + <0x00026000 0x00026000 0x00001000>, + <0x00027000 0x00027000 0x00001000>, + <0x00028000 0x00028000 0x00001000>, + <0x00029000 0x00029000 0x00001000>, + <0x0002a000 0x0002a000 0x00002000>, + <0x0002c000 0x0002c000 0x00004000>, + <0x00030000 0x00030000 0x00010000>; +}; + /include/ "omap446x-clocks.dtsi" diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 3b2244560c28..ab6f640b282b 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -364,7 +364,7 @@ pinctrl-names = "default"; pinctrl-0 = <&wlcore_irq_pin>; interrupt-parent = <&gpio1>; - interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; /* gpio 14 */ + interrupts = <14 IRQ_TYPE_EDGE_RISING>; /* gpio 14 */ ref-clock-frequency = <26000000>; }; }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 732b61a0e990..574ac11c0489 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -61,6 +61,20 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x1>; + + operating-points = < + /* kHz uV */ + 1000000 1060000 + 1500000 1250000 + >; + + clocks = <&dpll_mpu_ck>; + clock-names = "cpu"; + + clock-latency = <300000>; /* From omap-cpufreq driver */ + + /* cooling options */ + #cooling-cells = <2>; /* min followed by max */ }; }; diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi index e4ebcde17837..a520b4c14ea9 100644 --- a/arch/arm/boot/dts/pxa2xx.dtsi +++ b/arch/arm/boot/dts/pxa2xx.dtsi @@ -141,7 +141,7 @@ interrupts = <30 31>; }; - lcd-controller@40500000 { + lcdc: lcd-controller@40500000 { compatible = "marvell,pxa2xx-lcdc"; reg = <0x44000000 0x10000>; interrupts = <17>; diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi index 132a3b8ab148..3a8f0edc3af9 100644 --- a/arch/arm/boot/dts/pxa3xx.dtsi +++ b/arch/arm/boot/dts/pxa3xx.dtsi @@ -135,6 +135,7 @@ reg = <0x43100000 90>; interrupts = <45>; clocks = <&clks CLK_NAND>; + clock-names = "core"; dmas = <&pdma 97 3>; dma-names = "data"; #address-cells = <1>; @@ -242,6 +243,38 @@ clocks = <&clks CLK_PWM1>; status = "disabled"; }; + + ssp1: ssp@41000000 { + compatible = "mrvl,pxa3xx-ssp"; + reg = <0x41000000 0x40>; + interrupts = <24>; + clocks = <&clks CLK_SSP1>; + status = "disabled"; + }; + + ssp2: ssp@41700000 { + compatible = "mrvl,pxa3xx-ssp"; + reg = <0x41700000 0x40>; + interrupts = <16>; + clocks = <&clks CLK_SSP2>; + status = "disabled"; + }; + + ssp3: ssp@41900000 { + compatible = "mrvl,pxa3xx-ssp"; + reg = <0x41900000 0x40>; + interrupts = <0>; + clocks = <&clks CLK_SSP3>; + status = "disabled"; + }; + + ssp4: ssp@41a00000 { + compatible = "mrvl,pxa3xx-ssp"; + reg = <0x41a00000 0x40>; + interrupts = <13>; + clocks = <&clks CLK_SSP4>; + status = "disabled"; + }; }; clocks { diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index 7bcd7635e723..78db67337ed4 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -77,6 +77,14 @@ reg = <0x1>; clocks = <&gcc GCC_APPS_CLK_SRC>; clock-frequency = <0>; + operating-points = < + /* kHz uV (fixed) */ + 48000 1100000 + 200000 1100000 + 500000 1100000 + 666000 1100000 + >; + clock-latency = <256000>; }; cpu@2 { @@ -88,6 +96,14 @@ reg = <0x2>; clocks = <&gcc GCC_APPS_CLK_SRC>; clock-frequency = <0>; + operating-points = < + /* kHz uV (fixed) */ + 48000 1100000 + 200000 1100000 + 500000 1100000 + 666000 1100000 + >; + clock-latency = <256000>; }; cpu@3 { @@ -99,6 +115,14 @@ reg = <0x3>; clocks = <&gcc GCC_APPS_CLK_SRC>; clock-frequency = <0>; + operating-points = < + /* kHz uV (fixed) */ + 48000 1100000 + 200000 1100000 + 500000 1100000 + 666000 1100000 + >; + clock-latency = <256000>; }; }; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 1e0a3b446f7a..70790ac242d1 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/clock/qcom,gcc-ipq806x.h> #include <dt-bindings/clock/qcom,lcc-ipq806x.h> #include <dt-bindings/soc/qcom,gsbi.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> / { model = "Qualcomm IPQ8064"; @@ -43,7 +44,8 @@ cpu-pmu { compatible = "qcom,krait-pmu"; - interrupts = <1 10 0x304>; + interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; }; reserved-memory { @@ -97,7 +99,7 @@ clock-names = "ahbix-clk", "mi2s-osr-clk", "mi2s-bit-clk"; - interrupts = <0 85 1>; + interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>; interrupt-names = "lpass-irq-lpaif"; reg = <0x28100000 0x10000>; reg-names = "lpass-lpaif"; @@ -111,7 +113,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - interrupts = <0 16 0x4>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; }; intc: interrupt-controller@2000000 { @@ -125,11 +127,16 @@ timer@200a000 { compatible = "qcom,kpss-timer", "qcom,kpss-wdt-ipq8064", "qcom,msm-timer"; - interrupts = <1 1 0x301>, - <1 2 0x301>, - <1 3 0x301>, - <1 4 0x301>, - <1 5 0x301>; + interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 5 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>; reg = <0x0200a000 0x100>; clock-frequency = <25000000>, <32768>; @@ -177,7 +184,7 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x12490000 0x1000>, <0x12480000 0x1000>; - interrupts = <0 195 0x0>; + interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -186,7 +193,7 @@ i2c@124a0000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x124a0000 0x1000>; - interrupts = <0 196 0>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; clock-names = "core", "iface"; @@ -215,7 +222,7 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16340000 0x1000>, <0x16300000 0x1000>; - interrupts = <0 152 0x0>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -224,7 +231,7 @@ i2c@16380000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x16380000 0x1000>; - interrupts = <0 153 0>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>; clock-names = "core", "iface"; @@ -252,7 +259,7 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x1a240000 0x1000>, <0x1a200000 0x1000>; - interrupts = <0 154 0x0>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -261,7 +268,7 @@ i2c@1a280000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x1a280000 0x1000>; - interrupts = <0 155 0>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; clock-names = "core", "iface"; @@ -274,7 +281,7 @@ spi@1a280000 { compatible = "qcom,spi-qup-v1.1.1"; reg = <0x1a280000 0x1000>; - interrupts = <0 155 0>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; clock-names = "core", "iface"; @@ -301,7 +308,7 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16640000 0x1000>, <0x16600000 0x1000>; - interrupts = <0 158 0x0>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -323,7 +330,7 @@ compatible = "qcom,ipq806x-ahci", "generic-ahci"; reg = <0x29000000 0x180>; - interrupts = <0 209 0x0>; + interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc SFAB_SATA_S_H_CLK>, <&gcc SATA_H_CLK>, diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index 4dc0b347b1ee..c2dc9d09484a 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -189,6 +189,8 @@ regulator-max-microvolt = <2950000>; regulator-boot-on; + regulator-system-load = <200000>; + regulator-allow-set-load; }; l21 { diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts index 5af2a0116ff2..474baa0c7cfc 100644 --- a/arch/arm/boot/dts/r7s72100-genmai.dts +++ b/arch/arm/boot/dts/r7s72100-genmai.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Genmai board * * Copyright (C) 2013-14 Renesas Solutions Corp. * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com> - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r7s72100-gr-peach.dts b/arch/arm/boot/dts/r7s72100-gr-peach.dts index 779f724b4531..fe1a4aa4d7cb 100644 --- a/arch/arm/boot/dts/r7s72100-gr-peach.dts +++ b/arch/arm/boot/dts/r7s72100-gr-peach.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the GR-Peach board * * Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@jmondi.org> * Copyright (C) 2016 Renesas Electronics - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts index 5dcaaf131d27..8ee44a100e9a 100644 --- a/arch/arm/boot/dts/r7s72100-rskrza1.dts +++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the RZ/A1H RSK board * * Copyright (C) 2016 Renesas Electronics - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index a54822e97bac..2211f88ede2a 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r7s72100 SoC * * Copyright (C) 2013-14 Renesas Solutions Corp. * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com> - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r7s72100-clock.h> diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index 125c39c0222f..d530f451467e 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the APE6EVM board * * Copyright (C) 2013 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 080d037f5733..dd865f3c2eda 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a73a4 SoC * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Magnus Damm - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a73a4-clock.h> diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index 03b00d87b39b..32757caa2584 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the armadillo 800 eva board * * Copyright (C) 2012 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index eb9a911deefb..383cba68dbba 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a7740 SoC * * Copyright (C) 2012 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a7740-clock.h> diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts index d90eb8464222..327545119ee3 100644 --- a/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts +++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the iWave-RZ/G1M Qseven board + camera daughter board * * Copyright (C) 2017 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts index 6aa6b7467704..b683db4da8b1 100644 --- a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts +++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the iWave-RZ/G1M Qseven board * * Copyright (C) 2017 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi index d364685d9184..0e2e033cc849 100644 --- a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi +++ b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the iWave-RZG1M-20M Qseven SOM * * Copyright (C) 2017 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include "r8a7743.dtsi" diff --git a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts index 3d918d106593..ca0e0fc9b246 100644 --- a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts +++ b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the SK-RZG1M board * * Copyright (C) 2016-2017 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index 142949d7066f..24715f74ae08 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a7743 SoC * * Copyright (C) 2016-2017 Cogent Embedded Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/interrupt-controller/irq.h> @@ -98,8 +95,17 @@ reg = <1>; clock-frequency = <1500000000>; clocks = <&cpg CPG_CORE R8A7743_CLK_Z>; + clock-latency = <300000>; /* 300 us */ power-domains = <&sysc R8A7743_PD_CA15_CPU1>; next-level-cache = <&L2_CA15>; + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1500000 1000000>, + <1312500 1000000>, + <1125000 1000000>, + < 937500 1000000>, + < 750000 1000000>, + < 375000 1000000>; }; L2_CA15: cache-controller-0 { diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts index d34de8266ccd..2aeebfc9e4f1 100644 --- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the iWave-RZG1E SODIMM carrier board + HDMI daughter * board * * Copyright (C) 2017 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include "r8a7745-iwg22d-sodimm.dts" diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts index a4058f4cfbcd..1db220cfc1a1 100644 --- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the iWave-RZG1E SODIMM carrier board * * Copyright (C) 2017 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /* diff --git a/arch/arm/boot/dts/r8a7745-iwg22m.dtsi b/arch/arm/boot/dts/r8a7745-iwg22m.dtsi index 29b6e10fdf96..41f111b99a75 100644 --- a/arch/arm/boot/dts/r8a7745-iwg22m.dtsi +++ b/arch/arm/boot/dts/r8a7745-iwg22m.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the iWave-RZG1E-G22M SODIMM SOM * * Copyright (C) 2017 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include "r8a7745.dtsi" diff --git a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts index b4d679b04ad6..655b10bb42d5 100644 --- a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts +++ b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the SK-RZG1E board * * Copyright (C) 2016-2017 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi index 1cb7a7ab0418..c53f7ff20695 100644 --- a/arch/arm/boot/dts/r8a7745.dtsi +++ b/arch/arm/boot/dts/r8a7745.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a7745 SoC * * Copyright (C) 2016-2017 Cogent Embedded Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/interrupt-controller/irq.h> diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi index c85032f9605b..87d32d3e23de 100644 --- a/arch/arm/boot/dts/r8a77470.dtsi +++ b/arch/arm/boot/dts/r8a77470.dtsi @@ -7,7 +7,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/clock/renesas-cpg-mssr.h> +#include <dt-bindings/clock/r8a77470-cpg-mssr.h> / { compatible = "renesas,r8a77470"; #address-cells = <2>; @@ -22,7 +22,7 @@ compatible = "arm,cortex-a7"; reg = <0>; clock-frequency = <1000000000>; - clocks = <&cpg CPG_CORE 0>; + clocks = <&cpg CPG_CORE R8A77470_CLK_Z2>; power-domains = <&sysc 5>; next-level-cache = <&L2_CA7>; }; @@ -209,7 +209,7 @@ reg = <0 0xe6e60000 0 0x40>; interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 721>, - <&cpg CPG_CORE 5>, <&scif_clk>; + <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>; @@ -225,7 +225,7 @@ reg = <0 0xe6e68000 0 0x40>; interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 720>, - <&cpg CPG_CORE 5>, <&scif_clk>; + <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, <&dmac1 0x2d>, <&dmac1 0x2e>; @@ -241,7 +241,7 @@ reg = <0 0xe6e58000 0 0x40>; interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 719>, - <&cpg CPG_CORE 5>, <&scif_clk>; + <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, <&dmac1 0x2b>, <&dmac1 0x2c>; @@ -257,7 +257,7 @@ reg = <0 0xe6ea8000 0 0x40>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 718>, - <&cpg CPG_CORE 5>, <&scif_clk>; + <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2f>, <&dmac0 0x30>, <&dmac1 0x2f>, <&dmac1 0x30>; @@ -273,7 +273,7 @@ reg = <0 0xe6ee0000 0 0x40>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 715>, - <&cpg CPG_CORE 5>, <&scif_clk>; + <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, <&dmac1 0xfb>, <&dmac1 0xfc>; @@ -289,7 +289,7 @@ reg = <0 0xe6ee8000 0 0x40>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 714>, - <&cpg CPG_CORE 5>, <&scif_clk>; + <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, <&dmac1 0xfd>, <&dmac1 0xfe>; diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts index c79d55eb43c5..de808d2ea856 100644 --- a/arch/arm/boot/dts/r8a7778-bockw.dts +++ b/arch/arm/boot/dts/r8a7778-bockw.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Reference Device Tree Source for the Bock-W board * @@ -8,10 +9,6 @@ * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Simon Horman - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 3b49f9ed2e2b..1bce16cc6b20 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for Renesas r8a7778 * @@ -8,10 +9,6 @@ * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Simon Horman - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a7778-clock.h> diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index 4b9006bac3cb..a4d0038363f0 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Marzen board * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Simon Horman - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index e79ae306eedd..6b997bc016ee 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for Renesas r8a7779 * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Simon Horman - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a7779-clock.h> diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 092610e3f953..50312e752e2f 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Lager board * * Copyright (C) 2013-2014 Renesas Solutions Corp. * Copyright (C) 2014 Cogent Embedded, Inc. * Copyright (C) 2015-2016 Renesas Electronics Corporation - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /* diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 4d06b154bd7e..0925bdca438f 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a7790 SoC * * Copyright (C) 2015 Renesas Electronics Corporation * Copyright (C) 2013-2014 Renesas Solutions Corp. * Copyright (C) 2014 Cogent Embedded Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a7790-cpg-mssr.h> @@ -79,12 +76,12 @@ compatible = "arm,cortex-a15"; reg = <0>; clock-frequency = <1300000000>; - voltage-tolerance = <1>; /* 1% */ clocks = <&cpg CPG_CORE R8A7790_CLK_Z>; - clock-latency = <300000>; /* 300 us */ power-domains = <&sysc R8A7790_PD_CA15_CPU0>; next-level-cache = <&L2_CA15>; capacity-dmips-mhz = <1024>; + voltage-tolerance = <1>; /* 1% */ + clock-latency = <300000>; /* 300 us */ /* kHz - uV - OPPs unknown yet */ operating-points = <1400000 1000000>, @@ -104,6 +101,16 @@ power-domains = <&sysc R8A7790_PD_CA15_CPU1>; next-level-cache = <&L2_CA15>; capacity-dmips-mhz = <1024>; + voltage-tolerance = <1>; /* 1% */ + clock-latency = <300000>; /* 300 us */ + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1400000 1000000>, + <1225000 1000000>, + <1050000 1000000>, + < 875000 1000000>, + < 700000 1000000>, + < 350000 1000000>; }; cpu2: cpu@2 { @@ -115,6 +122,16 @@ power-domains = <&sysc R8A7790_PD_CA15_CPU2>; next-level-cache = <&L2_CA15>; capacity-dmips-mhz = <1024>; + voltage-tolerance = <1>; /* 1% */ + clock-latency = <300000>; /* 300 us */ + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1400000 1000000>, + <1225000 1000000>, + <1050000 1000000>, + < 875000 1000000>, + < 700000 1000000>, + < 350000 1000000>; }; cpu3: cpu@3 { @@ -126,6 +143,16 @@ power-domains = <&sysc R8A7790_PD_CA15_CPU3>; next-level-cache = <&L2_CA15>; capacity-dmips-mhz = <1024>; + voltage-tolerance = <1>; /* 1% */ + clock-latency = <300000>; /* 300 us */ + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1400000 1000000>, + <1225000 1000000>, + <1050000 1000000>, + < 875000 1000000>, + < 700000 1000000>, + < 350000 1000000>; }; cpu4: cpu@100 { diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 8ab793d8b2fd..ce22db01fbba 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Koelsch board * * Copyright (C) 2013 Renesas Electronics Corporation * Copyright (C) 2013-2014 Renesas Solutions Corp. * Copyright (C) 2014 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /* diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index a01101b49d99..f02036e5de01 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Porter board * * Copyright (C) 2015 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /* @@ -375,10 +372,43 @@ clock-frequency = <400000>; }; +&i2c6 { + status = "okay"; + clock-frequency = <100000>; + + pmic@5a { + compatible = "dlg,da9063l"; + reg = <0x5a>; + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + wdt { + compatible = "dlg,da9063-watchdog"; + }; + }; + + vdd_dvfs: regulator@68 { + compatible = "dlg,da9210"; + reg = <0x68>; + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; +}; + &sata0 { status = "okay"; }; +&cpu0 { + cpu0-supply = <&vdd_dvfs>; +}; + /* composite video input */ &vin0 { status = "okay"; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 6e1dd7ad7bd6..991ac6feedd5 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a7791 SoC * * Copyright (C) 2013-2015 Renesas Electronics Corporation * Copyright (C) 2013-2014 Renesas Solutions Corp. * Copyright (C) 2014 Cogent Embedded Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a7791-cpg-mssr.h> @@ -78,11 +75,11 @@ compatible = "arm,cortex-a15"; reg = <0>; clock-frequency = <1500000000>; - voltage-tolerance = <1>; /* 1% */ clocks = <&cpg CPG_CORE R8A7791_CLK_Z>; - clock-latency = <300000>; /* 300 us */ power-domains = <&sysc R8A7791_PD_CA15_CPU0>; next-level-cache = <&L2_CA15>; + voltage-tolerance = <1>; /* 1% */ + clock-latency = <300000>; /* 300 us */ /* kHz - uV - OPPs unknown yet */ operating-points = <1500000 1000000>, @@ -101,6 +98,16 @@ clocks = <&cpg CPG_CORE R8A7791_CLK_Z>; power-domains = <&sysc R8A7791_PD_CA15_CPU1>; next-level-cache = <&L2_CA15>; + voltage-tolerance = <1>; /* 1% */ + clock-latency = <300000>; /* 300 us */ + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1500000 1000000>, + <1312500 1000000>, + <1125000 1000000>, + < 937500 1000000>, + < 750000 1000000>, + < 375000 1000000>; }; L2_CA15: cache-controller-0 { diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts index 04fb70931b3b..f92301290b02 100644 --- a/arch/arm/boot/dts/r8a7792-blanche.dts +++ b/arch/arm/boot/dts/r8a7792-blanche.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Blanche board * * Copyright (C) 2014 Renesas Electronics Corporation * Copyright (C) 2016 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r8a7792-wheat.dts b/arch/arm/boot/dts/r8a7792-wheat.dts index db01de7a3811..f46f4567b3d4 100644 --- a/arch/arm/boot/dts/r8a7792-wheat.dts +++ b/arch/arm/boot/dts/r8a7792-wheat.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Wheat board * * Copyright (C) 2016 Renesas Electronics Corporation * Copyright (C) 2016 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi index f44257dd86f6..63a978ec81cc 100644 --- a/arch/arm/boot/dts/r8a7792.dtsi +++ b/arch/arm/boot/dts/r8a7792.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a7792 SoC * * Copyright (C) 2016 Cogent Embedded Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a7792-cpg-mssr.h> diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index aa209f6e5d71..6b2f3a4fd13d 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Gose board * * Copyright (C) 2014-2015 Renesas Electronics Corporation - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /* diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index 4abecfc0ca98..620a570307ff 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a7793 SoC * * Copyright (C) 2014-2015 Renesas Electronics Corporation - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a7793-cpg-mssr.h> @@ -70,10 +67,10 @@ compatible = "arm,cortex-a15"; reg = <0>; clock-frequency = <1500000000>; - voltage-tolerance = <1>; /* 1% */ clocks = <&cpg CPG_CORE R8A7793_CLK_Z>; - clock-latency = <300000>; /* 300 us */ power-domains = <&sysc R8A7793_PD_CA15_CPU0>; + voltage-tolerance = <1>; /* 1% */ + clock-latency = <300000>; /* 300 us */ /* kHz - uV - OPPs unknown yet */ operating-points = <1500000 1000000>, @@ -92,6 +89,17 @@ clock-frequency = <1500000000>; clocks = <&cpg CPG_CORE R8A7793_CLK_Z>; power-domains = <&sysc R8A7793_PD_CA15_CPU1>; + voltage-tolerance = <1>; /* 1% */ + clock-latency = <300000>; /* 300 us */ + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1500000 1000000>, + <1312500 1000000>, + <1125000 1000000>, + < 937500 1000000>, + < 750000 1000000>, + < 375000 1000000>; + next-level-cache = <&L2_CA15>; }; L2_CA15: cache-controller-0 { diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index e17027532941..ef7e2a837df6 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Alt board * * Copyright (C) 2014 Renesas Electronics Corporation - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index 7808aaee6644..daec965889d3 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the SILK board * * Copyright (C) 2014 Renesas Electronics Corporation * Copyright (C) 2014-2015 Renesas Solutions Corp. * Copyright (C) 2014-2015 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /* diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 736196903d22..ea2ca4bdaf1c 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a7794 SoC * * Copyright (C) 2014 Renesas Electronics Corporation * Copyright (C) 2014 Ulrich Hecht - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a7794-cpg-mssr.h> diff --git a/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi b/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi index 238d14bb0ebe..79fce67ebb1c 100644 --- a/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi +++ b/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Common file for the AA104XD12 panel connected to Renesas R-Car boards * * Copyright (C) 2014 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ / { diff --git a/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi b/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi index 04aafd479775..6e7589ea7562 100644 --- a/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi +++ b/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Common file for the AA121TD01 panel connected to Renesas R-Car boards * * Copyright (C) 2015 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ / { diff --git a/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts new file mode 100644 index 000000000000..4e57ae2688fc --- /dev/null +++ b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the RZN1D-DB Board + * + * Copyright (C) 2018 Renesas Electronics Europe Limited + * + */ + +/dts-v1/; + +#include "r9a06g032.dtsi" + +/ { + model = "RZN1D-DB Board"; + compatible = "renesas,rzn1d400-db", "renesas,r9a06g032"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + serial0 = &uart0; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi new file mode 100644 index 000000000000..afe29c95a006 --- /dev/null +++ b/arch/arm/boot/dts/r9a06g032.dtsi @@ -0,0 +1,115 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Base Device Tree Source for the Renesas RZ/N1D (R9A06G032) + * + * Copyright (C) 2018 Renesas Electronics Europe Limited + * + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "renesas,r9a06g032"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0>; + clocks = <&sysctrl 84>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <1>; + clocks = <&sysctrl 84>; + enable-method = "renesas,r9a06g032-smp"; + cpu-release-addr = <0 0x4000c204>; + }; + }; + + ext_jtag_clk: extjtagclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + ext_mclk: extmclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <40000000>; + }; + + ext_rgmii_ref: extrgmiiref { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + ext_rtc_clk: extrtcclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + ranges; + + sysctrl: system-controller@4000c000 { + compatible = "renesas,r9a06g032-sysctrl"; + reg = <0x4000c000 0x1000>; + status = "okay"; + #clock-cells = <1>; + + clocks = <&ext_mclk>, <&ext_rtc_clk>, + <&ext_jtag_clk>, <&ext_rgmii_ref>; + clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext"; + }; + + uart0: serial@40060000 { + compatible = "snps,dw-apb-uart"; + reg = <0x40060000 0x400>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&sysctrl 146>; + clock-names = "baudclk"; + status = "disabled"; + }; + + gic: gic@44101000 { + compatible = "arm,cortex-a7-gic", "arm,gic-400"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x44101000 0x1000>, /* Distributer */ + <0x44102000 0x2000>, /* CPU interface */ + <0x44104000 0x2000>, /* Virt interface control */ + <0x44106000 0x2000>; /* Virt CPU interface */ + interrupts = + <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + }; + }; + + timer { + compatible = "arm,cortex-a7-timer", + "arm,armv7-timer"; + interrupt-parent = <&gic>; + arm,cpu-registers-not-fw-configured; + always-on; + interrupts = + <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts index c0953410121b..2a7e6624efb9 100644 --- a/arch/arm/boot/dts/rk3036-evb.dts +++ b/arch/arm/boot/dts/rk3036-evb.dts @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /dts-v1/; diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts index e2a0f576946f..0fd19f9723df 100644 --- a/arch/arm/boot/dts/rk3036-kylin.dts +++ b/arch/arm/boot/dts/rk3036-kylin.dts @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /dts-v1/; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index 567a6a725f9c..67f57200d9a0 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index ef1eabf2512c..1c925f20dba0 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -1,44 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2013 MundoReader S.L. * Author: Heiko Stuebner <heiko@sntech.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts index d23ee6d911ac..ce525b956ae5 100644 --- a/arch/arm/boot/dts/rk3066a-marsboard.dts +++ b/arch/arm/boot/dts/rk3066a-marsboard.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2014 Romain Perier <romain.perier@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts index 13e285c53def..b6a8a82d219e 100644 --- a/arch/arm/boot/dts/rk3066a-mk808.dts +++ b/arch/arm/boot/dts/rk3066a-mk808.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 PaweÅ‚ Jarosz <paweljarosz3691@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts index 4d7057a10a4c..cd126b927ba8 100644 --- a/arch/arm/boot/dts/rk3066a-rayeager.dts +++ b/arch/arm/boot/dts/rk3066a-rayeager.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 06523caca27d..2ab3c4b32003 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -1,44 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2013 MundoReader S.L. * Author: Heiko Stuebner <heiko@sntech.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts index 8ba9e06062f3..375129b62102 100644 --- a/arch/arm/boot/dts/rk3188-px3-evb.dts +++ b/arch/arm/boot/dts/rk3188-px3-evb.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Andy Yan <andy.yan@rock-chips.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 00e05a6662ac..45fd2b302dda 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index aa10caae51c3..aa123f93f181 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -1,44 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2013 MundoReader S.L. * Author: Heiko Stuebner <heiko@sntech.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm/boot/dts/rk3228-evb.dts b/arch/arm/boot/dts/rk3228-evb.dts index 1be9daacc4f9..5670b33fd1bd 100644 --- a/arch/arm/boot/dts/rk3228-evb.dts +++ b/arch/arm/boot/dts/rk3228-evb.dts @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /dts-v1/; diff --git a/arch/arm/boot/dts/rk3229-evb.dts b/arch/arm/boot/dts/rk3229-evb.dts index 73e384585755..4df7accc3ad7 100644 --- a/arch/arm/boot/dts/rk3229-evb.dts +++ b/arch/arm/boot/dts/rk3229-evb.dts @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /dts-v1/; diff --git a/arch/arm/boot/dts/rk3229.dtsi b/arch/arm/boot/dts/rk3229.dtsi index 6fe6c15fc13a..cb7d3fad8e60 100644 --- a/arch/arm/boot/dts/rk3229.dtsi +++ b/arch/arm/boot/dts/rk3229.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "rk322x.dtsi" diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index be80e9a2c9af..cd8f2a3b0e91 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -80,6 +42,7 @@ reg = <0xf01>; resets = <&cru SRST_CORE1>; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; /* min followed by max */ enable-method = "psci"; }; @@ -89,6 +52,7 @@ reg = <0xf02>; resets = <&cru SRST_CORE2>; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; /* min followed by max */ enable-method = "psci"; }; @@ -98,6 +62,7 @@ reg = <0xf03>; resets = <&cru SRST_CORE3>; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; /* min followed by max */ enable-method = "psci"; }; }; diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts index b9418d170502..6592c809e2a5 100644 --- a/arch/arm/boot/dts/rk3288-evb-act8846.dts +++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /dts-v1/; #include "rk3288-evb.dtsi" diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts index 56c266df01c1..16788209625b 100644 --- a/arch/arm/boot/dts/rk3288-evb-rk808.dts +++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /dts-v1/; #include "rk3288-evb.dtsi" diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 39b61dce97ad..97e4d552ff0f 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) #include <dt-bindings/input/input.h> #include <dt-bindings/pwm/pwm.h> @@ -232,7 +194,7 @@ #address-cells = <1>; #size-cells = <0>; - edp_out_panel: endpoint { + edp_out_panel: endpoint@0 { reg = <0>; remote-endpoint = <&panel_in_edp>; }; diff --git a/arch/arm/boot/dts/rk3288-fennec.dts b/arch/arm/boot/dts/rk3288-fennec.dts index 41405974253a..b1b56dfdfdba 100644 --- a/arch/arm/boot/dts/rk3288-fennec.dts +++ b/arch/arm/boot/dts/rk3288-fennec.dts @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-firefly-beta.dts b/arch/arm/boot/dts/rk3288-firefly-beta.dts index 0195d9721660..0f3c29d7fbab 100644 --- a/arch/arm/boot/dts/rk3288-firefly-beta.dts +++ b/arch/arm/boot/dts/rk3288-firefly-beta.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi index 5f1e336dbaac..f57f286a93c3 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi @@ -1,44 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device tree file for Firefly Rockchip RK3288 Core board * Copyright (c) 2016 Randy Li <ayaka@soulik.info> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/input/input.h> diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts index eab176e3dfc3..58ea8bed040a 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload.dts +++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts @@ -1,44 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device tree file for Firefly Rockchip RK3288 Core board * Copyright (c) 2016 Randy Li <ayaka@soulik.info> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-firefly.dts b/arch/arm/boot/dts/rk3288-firefly.dts index 14271be72f30..556ab42dd81c 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dts +++ b/arch/arm/boot/dts/rk3288-firefly.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index b9e6f3a97240..a6ff7eac4aa8 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/input/input.h> diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts index 4d923aa6ed11..504ab1177aa7 100644 --- a/arch/arm/boot/dts/rk3288-miqi.dts +++ b/arch/arm/boot/dts/rk3288-miqi.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Heiko Stuebner <heiko@sntech.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-phycore-rdk.dts b/arch/arm/boot/dts/rk3288-phycore-rdk.dts index 985743fa134c..7077c3403483 100644 --- a/arch/arm/boot/dts/rk3288-phycore-rdk.dts +++ b/arch/arm/boot/dts/rk3288-phycore-rdk.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device tree file for Phytec PCM-947 carrier board * Copyright (C) 2017 PHYTEC Messtechnik GmbH * Author: Wadim Egorov <w.egorov@phytec.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-phycore-som.dtsi b/arch/arm/boot/dts/rk3288-phycore-som.dtsi index aaab2d171ffe..c218dd54c9b5 100644 --- a/arch/arm/boot/dts/rk3288-phycore-som.dtsi +++ b/arch/arm/boot/dts/rk3288-phycore-som.dtsi @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device tree file for Phytec phyCORE-RK3288 SoM * Copyright (C) 2017 PHYTEC Messtechnik GmbH * Author: Wadim Egorov <w.egorov@phytec.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/net/ti-dp83867.h> diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts index c06d0f4ceb81..596435e03132 100644 --- a/arch/arm/boot/dts/rk3288-popmetal.dts +++ b/arch/arm/boot/dts/rk3288-popmetal.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2014, 2015 Andy Yan <andy.yan@rock-chips.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts index e95215c9788b..28972fb4e221 100644 --- a/arch/arm/boot/dts/rk3288-r89.dts +++ b/arch/arm/boot/dts/rk3288-r89.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi index 51f36a1b698e..50325489c0ce 100644 --- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) #include <dt-bindings/pwm/pwm.h> #include "rk3288.dtsi" diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts index 8ccc89dbdfaf..6a30cadad88a 100644 --- a/arch/arm/boot/dts/rk3288-rock2-square.dts +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /dts-v1/; #include <dt-bindings/input/input.h> diff --git a/arch/arm/boot/dts/rk3288-tinker.dts b/arch/arm/boot/dts/rk3288-tinker.dts index 127488f9f174..ceade5962899 100644 --- a/arch/arm/boot/dts/rk3288-tinker.dts +++ b/arch/arm/boot/dts/rk3288-tinker.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi index 280aceae25d5..eaf921694e68 100644 --- a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Google Veyron (and derivatives) fragment for the max98090 audio * codec and analog headphone jack. * * Copyright 2016 Google, Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ / { diff --git a/arch/arm/boot/dts/rk3288-veyron-brain.dts b/arch/arm/boot/dts/rk3288-veyron-brain.dts index ed4255294ad4..5c94a33d695d 100644 --- a/arch/arm/boot/dts/rk3288-veyron-brain.dts +++ b/arch/arm/boot/dts/rk3288-veyron-brain.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Veyron Brain Rev 0 board device tree source * * Copyright 2014 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi index b16d570ff029..b54746df3661 100644 --- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi @@ -1,46 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Veyron (and derivatives) board device tree source * Chromebook specific parts * * Copyright 2015 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/clock/rockchip,rk808.h> @@ -174,7 +137,7 @@ reg = <1>; #address-cells = <1>; #size-cells = <0>; - edp_out_panel: endpoint { + edp_out_panel: endpoint@0 { reg = <0>; remote-endpoint = <&panel_in_edp>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts index d33f5763c39c..9d6814c7f285 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Veyron Jaq Rev 1+ board device tree source * * Copyright 2015 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts index cdea751f2a8c..2ba89895c33a 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jerry.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Veyron Jerry Rev 3+ board device tree source * * Copyright 2015 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts index f0994f0e5774..1e0158acf895 100644 --- a/arch/arm/boot/dts/rk3288-veyron-mickey.dts +++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Veyron Mickey Rev 0 board device tree source * * Copyright 2015 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts index 4c5307e62001..f95d0c5fcf71 100644 --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Veyron Minnie Rev 0+ board device tree source * * Copyright 2015 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts index 995cff42fa43..2950aadf49f0 100644 --- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts +++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Veyron Pinky Rev 2 board device tree source * * Copyright 2015 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi index 95e9bee8bca2..a4570444cc79 100644 --- a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Veyron (and derivatives) fragment for sdmmc cards * * Copyright 2015 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ &io_domains { diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts index cc0b78cefe34..e16421d80d22 100644 --- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts +++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Veyron Speedy Rev 1+ board device tree source * * Copyright 2015 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index 6e5bd8974f22..2075120cfc4d 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Veyron (and derivatives) board device tree source * * Copyright 2015 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/clock/rockchip,rk808.h> @@ -128,22 +91,26 @@ &cpu0 { cpu0-supply = <&vdd_cpu>; - operating-points = < - /* KHz uV */ - 1800000 1400000 - 1704000 1350000 - 1608000 1300000 - 1512000 1250000 - 1416000 1200000 - 1200000 1100000 - 1008000 1050000 - 816000 1000000 - 696000 950000 - 600000 900000 - 408000 900000 - 216000 900000 - 126000 900000 - >; +}; + +/* rk3288-c used in Veyron Chrome-devices has slightly changed OPPs */ +&cpu_opp_table { + /delete-node/ opp-312000000; + + opp-1512000000 { + opp-microvolt = <1250000>; + }; + opp-1608000000 { + opp-microvolt = <1300000>; + }; + opp-1704000000 { + opp-hz = /bits/ 64 <1704000000>; + opp-microvolt = <1350000>; + }; + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1400000>; + }; }; &emmc { diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts index 14c896bfc639..4856a9fc0aea 100644 --- a/arch/arm/boot/dts/rk3288-vyasa.dts +++ b/arch/arm/boot/dts/rk3288-vyasa.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2017 Jagan Teki <jagan@amarulasolutions.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index d7e49d29ace5..0840ffb3205c 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -98,21 +60,7 @@ compatible = "arm,cortex-a12"; reg = <0x500>; resets = <&cru SRST_CORE0>; - operating-points = < - /* KHz uV */ - 1608000 1350000 - 1512000 1300000 - 1416000 1200000 - 1200000 1100000 - 1008000 1050000 - 816000 1000000 - 696000 950000 - 600000 900000 - 408000 900000 - 312000 900000 - 216000 900000 - 126000 900000 - >; + operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; /* min followed by max */ clock-latency = <40000>; clocks = <&cru ARMCLK>; @@ -122,18 +70,84 @@ compatible = "arm,cortex-a12"; reg = <0x501>; resets = <&cru SRST_CORE1>; + operating-points = <&cpu_opp_table>; + #cooling-cells = <2>; /* min followed by max */ + clock-latency = <40000>; + clocks = <&cru ARMCLK>; }; cpu2: cpu@502 { device_type = "cpu"; compatible = "arm,cortex-a12"; reg = <0x502>; resets = <&cru SRST_CORE2>; + operating-points = <&cpu_opp_table>; + #cooling-cells = <2>; /* min followed by max */ + clock-latency = <40000>; + clocks = <&cru ARMCLK>; }; cpu3: cpu@503 { device_type = "cpu"; compatible = "arm,cortex-a12"; reg = <0x503>; resets = <&cru SRST_CORE3>; + operating-points = <&cpu_opp_table>; + #cooling-cells = <2>; /* min followed by max */ + clock-latency = <40000>; + clocks = <&cru ARMCLK>; + }; + }; + + cpu_opp_table: cpu-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-126000000 { + opp-hz = /bits/ 64 <126000000>; + opp-microvolt = <900000>; + }; + opp-216000000 { + opp-hz = /bits/ 64 <216000000>; + opp-microvolt = <900000>; + }; + opp-312000000 { + opp-hz = /bits/ 64 <312000000>; + opp-microvolt = <900000>; + }; + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <900000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <900000>; + }; + opp-696000000 { + opp-hz = /bits/ 64 <696000000>; + opp-microvolt = <950000>; + }; + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <1000000>; + }; + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1050000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1100000>; + }; + opp-1416000000 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <1200000>; + }; + opp-1512000000 { + opp-hz = /bits/ 64 <1512000000>; + opp-microvolt = <1300000>; + }; + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <1350000>; }; }; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 49584b6a4195..d752dc611fd7 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -1,44 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2013 MundoReader S.L. * Author: Heiko Stuebner <heiko@sntech.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/interrupt-controller/irq.h> diff --git a/arch/arm/boot/dts/rv1108-evb.dts b/arch/arm/boot/dts/rv1108-evb.dts index 70f0106d1252..203d83e3bbf5 100644 --- a/arch/arm/boot/dts/rv1108-evb.dts +++ b/arch/arm/boot/dts/rv1108-evb.dts @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /dts-v1/; diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi index 76ea24636feb..ed8f6ca52c5b 100644 --- a/arch/arm/boot/dts/rv1108.dtsi +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi new file mode 100644 index 000000000000..575094ea7024 --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-aries.dtsi @@ -0,0 +1,419 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's S5PV210 based Galaxy Aries board device tree source + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "s5pv210.dtsi" + +/ { + compatible = "samsung,aries", "samsung,s5pv210"; + + aliases { + i2c6 = &i2c_pmic; + i2c9 = &i2c_fuel; + }; + + memory@30000000 { + device_type = "memory"; + reg = <0x30000000 0x05000000 + 0x40000000 0x10000000 + 0x50000000 0x08000000>; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpg1 2 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_gpio_rst>; + post-power-on-delay-ms = <500>; + power-off-delay-us = <500>; + }; + + i2c_pmic: i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&gpj4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpj4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "maxim,max8998"; + reg = <0x66>; + interrupt-parent = <&gph0>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + + max8998,pmic-buck1-default-dvs-idx = <1>; + max8998,pmic-buck1-dvs-gpios = <&gph0 3 GPIO_ACTIVE_HIGH>, + <&gph0 4 GPIO_ACTIVE_HIGH>; + max8998,pmic-buck1-dvs-voltage = <1275000>, <1200000>, + <1050000>, <950000>; + + max8998,pmic-buck2-default-dvs-idx = <0>; + max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>; + max8998,pmic-buck2-dvs-voltage = <1100000>, <1000000>; + + regulators { + ldo2_reg: LDO2 { + regulator-name = "VALIVE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo3_reg: LDO3 { + regulator-name = "VUSB_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo4_reg: LDO4 { + regulator-name = "VADC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo5_reg: LDO5 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo6_reg: LDO6 { + regulator-name = "LDO6"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3600000>; + }; + + ldo7_reg: LDO7 { + regulator-name = "VLCD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + /* Till we get panel driver */ + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo8_reg: LDO8 { + regulator-name = "VUSB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo9_reg: LDO9 { + regulator-name = "VCC_2.8V_PDA"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "VPLL_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo11_reg: LDO11 { + regulator-name = "CAM_AF_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo12_reg: LDO12 { + regulator-name = "CAM_SENSOR_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo13_reg: LDO13 { + regulator-name = "VGA_VDDIO_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo14_reg: LDO14 { + regulator-name = "VGA_DVDD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo15_reg: LDO15 { + regulator-name = "CAM_ISP_HOST_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo16_reg: LDO16 { + regulator-name = "VGA_AVDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo17_reg: LDO17 { + regulator-name = "VCC_3.0V_LCD"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + /* Till we get panel driver */ + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck1_reg: BUCK1 { + regulator-name = "vddarm"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1250000>; + }; + }; + + buck2_reg: BUCK2 { + regulator-name = "vddint"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1100000>; + }; + }; + + buck3_reg: BUCK3 { + regulator-name = "VCC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "CAM_ISP_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ap32khz_reg: EN32KHz-AP { + regulator-name = "32KHz AP"; + regulator-always-on; + }; + + cp32khz_reg: EN32KHz-CP { + regulator-name = "32KHz CP"; + }; + + vichg_reg: ENVICHG { + regulator-name = "VICHG"; + regulator-always-on; + }; + + safe1_sreg: ESAFEOUT1 { + regulator-name = "SAFEOUT1"; + }; + + safe2_sreg: ESAFEOUT2 { + regulator-name = "SAFEOUT2"; + }; + }; + }; + }; + + i2c_fuel: i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&mp05 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&mp05 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + fuelgauge@36 { + compatible = "maxim,max17040"; + interrupt-parent = <&vic0>; + interrupts = <7>; + reg = <0x36>; + }; + }; +}; + +&fimd { + pinctrl-names = "default"; + pinctrl-0 = <&lcd_clk &lcd_data24>; + status = "okay"; + + samsung,invert-vden; + samsung,invert-vclk; + + display-timings { + timing-0 { + /* 480x800@60Hz */ + clock-frequency = <25628040>; + hactive = <480>; + vactive = <800>; + hfront-porch = <16>; + hback-porch = <16>; + hsync-len = <2>; + vfront-porch = <28>; + vback-porch = <1>; + vsync-len = <2>; + }; + }; +}; + +&hsotg { + vusb_a-supply = <&ldo8_reg>; + vusb_d-supply = <&ldo3_reg>; + dr_mode = "peripheral"; + status = "okay"; +}; + +&pinctrl0 { + wlan_bt_en: wlan-bt-en { + samsung,pins = "gpb-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-val = <1>; + }; + + wlan_gpio_rst: wlan-gpio-rst { + samsung,pins = "gpg1-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + }; + + wifi_host_wake: wifi-host-wake { + samsung,pins = "gph2-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + tf_detect: tf-detect { + samsung,pins = "gph3-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + wifi_wake: wifi-wake { + samsung,pins = "gph3-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + }; +}; + +&sdhci1 { + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + max-frequency = <38400000>; + pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4 &wifi_wake &wifi_host_wake &wlan_bt_en>; + pinctrl-names = "default"; + cap-sd-highspeed; + cap-mmc-highspeed; + + mmc-pwrseq = <&wifi_pwrseq>; + non-removable; + status = "okay"; + + wlan@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&gph2>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + }; +}; + +&sdhci2 { + bus-width = <4>; + cd-gpios = <&gph3 4 GPIO_ACTIVE_LOW>; + vmmc-supply = <&ldo5_reg>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &tf_detect>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usbphy { + status = "okay"; + vbus-supply = <&safe1_sreg>; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts new file mode 100644 index 000000000000..ccf761b1babf --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "s5pv210-aries.dtsi" + +/ { + model = "Samsung Galaxy S Fascinate 4G (SGH-T959P) based on S5PV210"; + compatible = "samsung,fascinate4g", "samsung,aries", "samsung,s5pv210"; + + chosen { + stdout-path = &uart2; + /* + * It's hard to change those parameters in stock bootloader, + * since it requires special hardware/cable. + * Let's hardocde bootargs for now, till u-boot port is finished, + * with which it should be easier. + */ + bootargs = "root=/dev/mmcblk1p1 rw rootwait ignore_loglevel earlyprintk"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "power"; + gpios = <&gph2 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + + vol-down { + label = "volume_down"; + gpios = <&gph3 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + vol-up { + label = "volume_up"; + gpios = <&gph3 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; +}; diff --git a/arch/arm/boot/dts/s5pv210-galaxys.dts b/arch/arm/boot/dts/s5pv210-galaxys.dts new file mode 100644 index 000000000000..842276749717 --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-galaxys.dts @@ -0,0 +1,77 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "s5pv210-aries.dtsi" + +/ { + model = "Samsung Galaxy S1 (GT-I9000) based on S5PV210"; + compatible = "samsung,galaxys", "samsung,aries", "samsung,s5pv210"; + + chosen { + stdout-path = &uart2; + /* + * It's hard to change those parameters in stock bootloader, + * since it requires special hardware/cable. + * Let's hardocde bootargs for now, till u-boot port is finished, + * with which it should be easier. + */ + bootargs = "root=/dev/mmcblk2p1 rw rootwait ignore_loglevel earlyprintk"; + }; + + nand_pwrseq: nand-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpj2 7 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&massmemory_en>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "power"; + gpios = <&gph2 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + + vol-down { + label = "volume_down"; + gpios = <&gph3 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + vol-up { + label = "volume_up"; + gpios = <&gph3 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + home { + label = "home"; + gpios = <&gph3 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + wakeup-source; + }; + }; +}; + +&pinctrl0 { + massmemory_en: massmemory-en { + samsung,pins = "gpj2-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; +}; + +&sdhci0 { + bus-width = <4>; + non-removable; + mmc-pwrseq = <&nand_pwrseq>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi index 3a79feab11c3..7f0c9d447871 100644 --- a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi +++ b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi @@ -258,6 +258,8 @@ gph2: gph2 { gpio-controller; #gpio-cells = <2>; + + interrupt-controller; #interrupt-cells = <2>; }; diff --git a/arch/arm/boot/dts/sama5d2-pinfunc.h b/arch/arm/boot/dts/sama5d2-pinfunc.h index e57191fb83de..1c01a6f843d8 100644 --- a/arch/arm/boot/dts/sama5d2-pinfunc.h +++ b/arch/arm/boot/dts/sama5d2-pinfunc.h @@ -375,7 +375,7 @@ #define PIN_PB22__GPIO PINMUX_PIN(PIN_PB22, 0, 0) #define PIN_PB22__LCDDAT11 PINMUX_PIN(PIN_PB22, 1, 1) #define PIN_PB22__A11 PINMUX_PIN(PIN_PB22, 2, 1) -#define PIN_PB22__TDO PINMUX_PIN(PIN_PB22, 3, 1) +#define PIN_PB22__TD0 PINMUX_PIN(PIN_PB22, 3, 1) #define PIN_PB22__TIOA2 PINMUX_PIN(PIN_PB22, 4, 2) #define PIN_PB22__FLEXCOM3_IO1 PINMUX_PIN(PIN_PB22, 5, 3) #define PIN_PB22__GMDC PINMUX_PIN(PIN_PB22, 6, 3) @@ -556,7 +556,7 @@ #define PIN_PC14__LCDDAT6 PINMUX_PIN(PIN_PC14, 1, 2) #define PIN_PC14__GRX0 PINMUX_PIN(PIN_PC14, 2, 1) #define PIN_PC14__ISC_D5 PINMUX_PIN(PIN_PC14, 3, 1) -#define PIN_PC14__TDO PINMUX_PIN(PIN_PC14, 5, 2) +#define PIN_PC14__TD0 PINMUX_PIN(PIN_PC14, 5, 2) #define PIN_PC14__A3 PINMUX_PIN(PIN_PC14, 6, 2) #define PIN_PC15 79 #define PIN_PC15__GPIO PINMUX_PIN(PIN_PC15, 0, 0) diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index eae5e1ee9cd8..1408fa4a62e4 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -494,7 +494,7 @@ atmel,external-irqs = <47>; }; - pinctrl@fffff200 { + pinctrl: pinctrl@fffff200 { #address-cells = <1>; #size-cells = <1>; compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus"; @@ -1340,13 +1340,13 @@ }; }; - rstc@fffffe00 { + reset_controller: rstc@fffffe00 { compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc"; reg = <0xfffffe00 0x10>; clocks = <&clk32k>; }; - shutdown-controller@fffffe10 { + shutdown_controller: shutdown-controller@fffffe10 { compatible = "atmel,at91sam9x5-shdwc"; reg = <0xfffffe10 0x10>; clocks = <&clk32k>; @@ -1359,7 +1359,7 @@ clocks = <&mck>; }; - watchdog@fffffe40 { + watchdog: watchdog@fffffe40 { compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffe40 0x10>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 0cf9beddd556..92a35a1942b6 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -392,7 +392,7 @@ }; pmc: pmc@f0018000 { - compatible = "atmel,sama5d3-pmc", "syscon"; + compatible = "atmel,sama5d4-pmc", "syscon"; reg = <0xf0018000 0x120>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts index 3d65f1f6d78b..daac0c6078c5 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the KZM-A9-GT board * @@ -5,10 +6,6 @@ * * Based on sh73a0-kzm9g.dts * Copyright (C) 2012 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index c953648a5f41..e8f0a07c4564 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the SH73A0 SoC * * Copyright (C) 2012 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/sh73a0-clock.h> diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 486d4e7433ed..b38f8c240558 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -748,13 +748,13 @@ nand0: nand@ff900000 { #address-cells = <0x1>; #size-cells = <0x1>; - compatible = "denali,denali-nand-dt"; + compatible = "altr,socfpga-denali-nand"; reg = <0xff900000 0x100000>, <0xffb80000 0x10000>; reg-names = "nand_data", "denali_reg"; interrupts = <0x0 0x90 0x4>; dma-mask = <0xffffffff>; - clocks = <&nand_clk>; + clocks = <&nand_x_clk>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index bead79e4b2aa..a4dcb68f4322 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -587,14 +587,25 @@ status = "disabled"; }; + spi0: spi@ffda4000 { + compatible = "snps,dw-apb-ssi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xffda4000 0x100>; + interrupts = <0 101 4>; + num-cs = <4>; + /*32bit_access;*/ + clocks = <&spi_m_clk>; + status = "disabled"; + }; + spi1: spi@ffda5000 { compatible = "snps,dw-apb-ssi"; #address-cells = <1>; #size-cells = <0>; reg = <0xffda5000 0x100>; interrupts = <0 102 4>; - num-chipselect = <4>; - bus-num = <0>; + num-cs = <4>; /*32bit_access;*/ tx-dma-channel = <&pdma 16>; rx-dma-channel = <&pdma 17>; @@ -633,7 +644,7 @@ nand: nand@ffb90000 { #address-cells = <1>; #size-cells = <1>; - compatible = "denali,denali-nand-dt", "altr,socfpga-denali-nand"; + compatible = "altr,socfpga-denali-nand"; reg = <0xffb90000 0x72000>, <0xffb80000 0x10000>; reg-names = "nand_data", "denali_reg"; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index 733678b75b88..fca76a696d9d 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -661,7 +661,6 @@ reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd"; clocks = <&hclksmc>; status = "okay"; - timings = /bits/ 8 <0 0 0 0x10 0x0a 0>; partition@0 { label = "X-Loader(NAND)"; diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index ede77e0f1c41..e35d782e7e5f 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -302,7 +302,7 @@ interrupt-parent = <&exti>; interrupts = <17 1>; interrupt-names = "alarm"; - st,syscfg = <&pwrcfg>; + st,syscfg = <&pwrcfg 0x00 0x100>; status = "disabled"; }; @@ -310,6 +310,7 @@ compatible = "st,stm32-iwdg"; reg = <0x40003000 0x400>; clocks = <&clk_lsi>; + clock-names = "lsi"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi index 1479e3eb05fa..f48d06a80d1d 100644 --- a/arch/arm/boot/dts/stm32f746.dtsi +++ b/arch/arm/boot/dts/stm32f746.dtsi @@ -297,7 +297,7 @@ interrupt-parent = <&exti>; interrupts = <17 1>; interrupt-names = "alarm"; - st,syscfg = <&pwrcfg>; + st,syscfg = <&pwrcfg 0x00 0x100>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi index 4839db146890..c4851271e810 100644 --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi @@ -157,6 +157,52 @@ }; }; + ethernet0_rgmii_pins_a: rgmii-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */ + <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */ + bias-disable; + }; + }; + + ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */ + <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */ + }; + }; + i2c1_pins_a: i2c1-0 { pins { pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */ @@ -187,6 +233,19 @@ }; }; + m_can1_pins_a: m-can1-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('I', 9, AF9)>; /* CAN1_RX */ + bias-disable; + }; + }; + pwm2_pins_a: pwm2-0 { pins { pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */ @@ -281,7 +340,6 @@ pins-are-numbered; interrupt-parent = <&exti>; st,syscfg = <&exti 0x60 0xff>; - status = "disabled"; gpioz: gpio@54004000 { gpio-controller; @@ -305,6 +363,21 @@ slew-rate = <0>; }; }; + + spi1_pins_a: spi1-0 { + pins1 { + pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */ + <STM32_PINMUX('Z', 2, AF5)>; /* SPI1_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = <STM32_PINMUX('Z', 1, AF5)>; /* SPI1_MISO */ + bias-disable; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index ae336530b59b..f77bea49c079 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -49,10 +49,27 @@ }; }; +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + &rng1 { status = "okay"; }; +&rtc { + status = "okay"; +}; + &timers6 { status = "okay"; timer@5 { @@ -60,14 +77,6 @@ }; }; -&i2c4 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c4_pins_a>; - i2c-scl-rising-time-ns = <185>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; -}; - &uart4 { pinctrl-names = "default"; pinctrl-0 = <&uart4_pins_a>; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index 9382d8063031..372bc2ea6b92 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -17,6 +17,26 @@ aliases { serial0 = &uart4; + ethernet0 = ðernet0; + }; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rgmii_pins_a>; + pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii"; + max-speed = <1000>; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <0>; + }; }; }; @@ -42,6 +62,12 @@ status = "okay"; }; +&m_can1 { + pinctrl-names = "default"; + pinctrl-0 = <&m_can1_pins_a>; + status = "okay"; +}; + &qspi { pinctrl-names = "default"; pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>; @@ -67,6 +93,12 @@ }; }; +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins_a>; + status = "disabled"; +}; + &timers2 { status = "disabled"; pwm { @@ -103,6 +135,19 @@ }; }; +&usbh_ehci { + phys = <&usbphyc_port0>; + phy-names = "usb"; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "peripheral"; + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + status = "okay"; +}; + &usbphyc { status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi index 7d1753893453..661be948ab74 100644 --- a/arch/arm/boot/dts/stm32mp157c.dtsi +++ b/arch/arm/boot/dts/stm32mp157c.dtsi @@ -35,20 +35,6 @@ cpu_on = <0x84000003>; }; - aliases { - gpio0 = &gpioa; - gpio1 = &gpiob; - gpio2 = &gpioc; - gpio3 = &gpiod; - gpio4 = &gpioe; - gpio5 = &gpiof; - gpio6 = &gpiog; - gpio7 = &gpioh; - gpio8 = &gpioi; - gpio9 = &gpioj; - gpio10 = &gpiok; - }; - intc: interrupt-controller@a0021000 { compatible = "arm,cortex-a7-gic"; #interrupt-cells = <3>; @@ -311,6 +297,34 @@ }; }; + spi2: spi@4000b000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x4000b000 0x400>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI2_K>; + resets = <&rcc SPI2_R>; + dmas = <&dmamux1 39 0x400 0x05>, + <&dmamux1 40 0x400 0x05>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi3: spi@4000c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x4000c000 0x400>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI3_K>; + resets = <&rcc SPI3_R>; + dmas = <&dmamux1 61 0x400 0x05>, + <&dmamux1 62 0x400 0x05>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + usart2: serial@4000e000 { compatible = "st,stm32h7-uart"; reg = <0x4000e000 0x400>; @@ -494,6 +508,34 @@ status = "disabled"; }; + spi1: spi@44004000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x44004000 0x400>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI1_K>; + resets = <&rcc SPI1_R>; + dmas = <&dmamux1 37 0x400 0x05>, + <&dmamux1 38 0x400 0x05>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi4: spi@44005000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x44005000 0x400>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI4_K>; + resets = <&rcc SPI4_R>; + dmas = <&dmamux1 83 0x400 0x05>, + <&dmamux1 84 0x400 0x05>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + timers15: timer@44006000 { #address-cells = <1>; #size-cells = <0>; @@ -556,6 +598,116 @@ }; }; + spi5: spi@44009000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x44009000 0x400>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI5_K>; + resets = <&rcc SPI5_R>; + dmas = <&dmamux1 85 0x400 0x05>, + <&dmamux1 86 0x400 0x05>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + dfsdm: dfsdm@4400d000 { + compatible = "st,stm32mp1-dfsdm"; + reg = <0x4400d000 0x800>; + clocks = <&rcc DFSDM_K>; + clock-names = "dfsdm"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + dfsdm0: filter@0 { + compatible = "st,stm32-dfsdm-adc"; + #io-channel-cells = <1>; + reg = <0>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 101 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + + dfsdm1: filter@1 { + compatible = "st,stm32-dfsdm-adc"; + #io-channel-cells = <1>; + reg = <1>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 102 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + + dfsdm2: filter@2 { + compatible = "st,stm32-dfsdm-adc"; + #io-channel-cells = <1>; + reg = <2>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 103 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + + dfsdm3: filter@3 { + compatible = "st,stm32-dfsdm-adc"; + #io-channel-cells = <1>; + reg = <3>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 104 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + + dfsdm4: filter@4 { + compatible = "st,stm32-dfsdm-adc"; + #io-channel-cells = <1>; + reg = <4>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 91 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + + dfsdm5: filter@5 { + compatible = "st,stm32-dfsdm-adc"; + #io-channel-cells = <1>; + reg = <5>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 92 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + }; + + m_can1: can@4400e000 { + compatible = "bosch,m_can"; + reg = <0x4400e000 0x400>, <0x44011000 0x2800>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; + status = "disabled"; + }; + + m_can2: can@4400f000 { + compatible = "bosch,m_can"; + reg = <0x4400f000 0x400>, <0x44011000 0x2800>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; + status = "disabled"; + }; + dma1: dma@48000000 { compatible = "st,stm32-dma"; reg = <0x48000000 0x400>; @@ -600,6 +752,57 @@ clocks = <&rcc DMAMUX>; }; + adc: adc@48003000 { + compatible = "st,stm32mp1-adc-core"; + reg = <0x48003000 0x400>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc ADC12>, <&rcc ADC12_K>; + clock-names = "bus", "adc"; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + adc1: adc@0 { + compatible = "st,stm32mp1-adc"; + #io-channel-cells = <1>; + reg = <0x0>; + interrupt-parent = <&adc>; + interrupts = <0>; + dmas = <&dmamux1 9 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + + adc2: adc@100 { + compatible = "st,stm32mp1-adc"; + #io-channel-cells = <1>; + reg = <0x100>; + interrupt-parent = <&adc>; + interrupts = <1>; + dmas = <&dmamux1 10 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + }; + + usbotg_hs: usb-otg@49000000 { + compatible = "snps,dwc2"; + reg = <0x49000000 0x10000>; + clocks = <&rcc USBO_K>; + clock-names = "otg"; + resets = <&rcc USBO_R>; + reset-names = "dwc2"; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + g-rx-fifo-size = <256>; + g-np-tx-fifo-size = <32>; + g-tx-fifo-size = <128 128 64 64 64 64 32 32>; + dr_mode = "otg"; + status = "disabled"; + }; + rcc: rcc@50000000 { compatible = "st,stm32mp1-rcc", "syscon"; reg = <0x50000000 0x1000>; @@ -614,6 +817,11 @@ reg = <0x5000d000 0x400>; }; + syscfg: syscon@50020000 { + compatible = "st,stm32mp157-syscfg", "syscon"; + reg = <0x50020000 0x400>; + }; + lptimer2: timer@50021000 { #address-cells = <1>; #size-cells = <0>; @@ -709,6 +917,18 @@ status = "disabled"; }; + hash1: hash@54002000 { + compatible = "st,stm32f756-hash"; + reg = <0x54002000 0x400>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc HASH1>; + resets = <&rcc HASH1_R>; + dmas = <&mdma1 31 0x10 0x1000A02 0x0 0x0 0x0>; + dma-names = "in"; + dma-maxburst = <2>; + status = "disabled"; + }; + rng1: rng@54003000 { compatible = "st,stm32-rng"; reg = <0x54003000 0x400>; @@ -744,6 +964,36 @@ status = "disabled"; }; + stmmac_axi_config_0: stmmac-axi-config { + snps,wr_osr_lmt = <0x7>; + snps,rd_osr_lmt = <0x7>; + snps,blen = <0 0 0 0 16 8 4>; + }; + + ethernet0: ethernet@5800a000 { + compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a"; + reg = <0x5800a000 0x2000>; + reg-names = "stmmaceth"; + interrupts-extended = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clock-names = "stmmaceth", + "mac-clk-tx", + "mac-clk-rx", + "ethstp", + "syscfg-clk"; + clocks = <&rcc ETHMAC>, + <&rcc ETHTX>, + <&rcc ETHRX>, + <&rcc ETHSTP>, + <&rcc SYSCFG>; + st,syscon = <&syscfg 0x4>; + snps,mixed-burst; + snps,pbl = <2>; + snps,axi-config = <&stmmac_axi_config_0>; + snps,tso; + status = "disabled"; + }; + usbh_ohci: usbh-ohci@5800c000 { compatible = "generic-ohci"; reg = <0x5800c000 0x1000>; @@ -784,6 +1034,14 @@ status = "disabled"; }; + iwdg2: watchdog@5a002000 { + compatible = "st,stm32mp1-iwdg"; + reg = <0x5a002000 0x400>; + clocks = <&rcc IWDG2>, <&rcc CK_LSI>; + clock-names = "pclk", "lsi"; + status = "disabled"; + }; + usbphyc: usbphyc@5a006000 { #address-cells = <1>; #size-cells = <0>; @@ -812,6 +1070,20 @@ status = "disabled"; }; + spi6: spi@5c001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x5c001000 0x400>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI6_K>; + resets = <&rcc SPI6_R>; + dmas = <&mdma1 34 0x0 0x40008 0x0 0x0 0>, + <&mdma1 35 0x0 0x40002 0x0 0x0 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + i2c4: i2c@5c002000 { compatible = "st,stm32f7-i2c"; reg = <0x5c002000 0x400>; @@ -825,6 +1097,15 @@ status = "disabled"; }; + rtc: rtc@5c004000 { + compatible = "st,stm32mp1-rtc"; + reg = <0x5c004000 0x400>; + clocks = <&rcc RTCAPB>, <&rcc RTC>; + clock-names = "pclk", "rtc_ck"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + i2c6: i2c@5c009000 { compatible = "st,stm32f7-i2c"; reg = <0x5c009000 0x400>; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 3a1c6b45c9a1..3d62a8950720 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -190,8 +190,8 @@ #size-cells = <1>; ranges; - sram-controller@1c00000 { - compatible = "allwinner,sun4i-a10-sram-controller"; + system-control@1c00000 { + compatible = "allwinner,sun4i-a10-system-control"; reg = <0x01c00000 0x30>; #address-cells = <1>; #size-cells = <1>; @@ -1001,6 +1001,27 @@ status = "disabled"; }; + mali: gpu@1c40000 { + compatible = "allwinner,sun4i-a10-mali", "arm,mali-400"; + reg = <0x01c40000 0x10000>; + interrupts = <69>, + <70>, + <71>, + <72>, + <73>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pmu"; + clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>; + clock-names = "bus", "core"; + resets = <&ccu RST_GPU>; + + assigned-clocks = <&ccu CLK_GPU>; + assigned-clock-rates = <384000000>; + }; + fe0: display-frontend@1e00000 { compatible = "allwinner,sun4i-a10-display-frontend"; reg = <0x01e00000 0x20000>; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 07f2248ed5f8..8bfb36651177 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -114,8 +114,8 @@ #size-cells = <1>; ranges; - sram-controller@1c00000 { - compatible = "allwinner,sun4i-a10-sram-controller"; + system-control@1c00000 { + compatible = "allwinner,sun5i-a13-system-control"; reg = <0x01c00000 0x30>; #address-cells = <1>; #size-cells = <1>; @@ -127,12 +127,13 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0 0x00000000 0xc000>; - }; - emac_sram: sram-section@8000 { - compatible = "allwinner,sun4i-a10-sram-a3-a4"; - reg = <0x8000 0x4000>; - status = "disabled"; + emac_sram: sram-section@8000 { + compatible = "allwinner,sun5i-a13-sram-a3-a4", + "allwinner,sun4i-a10-sram-a3-a4"; + reg = <0x8000 0x4000>; + status = "disabled"; + }; }; sram_d: sram@10000 { @@ -143,11 +144,26 @@ ranges = <0 0x00010000 0x1000>; otg_sram: sram-section@0 { - compatible = "allwinner,sun4i-a10-sram-d"; + compatible = "allwinner,sun5i-a13-sram-d", + "allwinner,sun4i-a10-sram-d"; reg = <0x0000 0x1000>; status = "disabled"; }; }; + + sram_c: sram@1d00000 { + compatible = "mmio-sram"; + reg = <0x01d00000 0xd0000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x01d00000 0xd0000>; + + ve_sram: sram-section@0 { + compatible = "allwinner,sun5i-a13-sram-c1", + "allwinner,sun4i-a10-sram-c1"; + reg = <0x000000 0x80000>; + }; + }; }; dma: dma-controller@1c02000 { diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index c72992556a86..debc0bf22ea3 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -119,18 +119,48 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <1>; + clocks = <&ccu CLK_CPU>; + clock-latency = <244144>; /* 8 32k periods */ + operating-points = < + /* kHz uV */ + 1008000 1200000 + 864000 1200000 + 720000 1100000 + 480000 1000000 + >; + #cooling-cells = <2>; }; cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <2>; + clocks = <&ccu CLK_CPU>; + clock-latency = <244144>; /* 8 32k periods */ + operating-points = < + /* kHz uV */ + 1008000 1200000 + 864000 1200000 + 720000 1100000 + 480000 1000000 + >; + #cooling-cells = <2>; }; cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <3>; + clocks = <&ccu CLK_CPU>; + clock-latency = <244144>; /* 8 32k periods */ + operating-points = < + /* kHz uV */ + 1008000 1200000 + 864000 1200000 + 720000 1100000 + 480000 1000000 + >; + #cooling-cells = <2>; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index e529e4ff2174..9c52712af241 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -122,6 +122,19 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <1>; + clocks = <&ccu CLK_CPU>; + clock-latency = <244144>; /* 8 32k periods */ + operating-points = < + /* kHz uV */ + 960000 1400000 + 912000 1400000 + 864000 1300000 + 720000 1200000 + 528000 1100000 + 312000 1000000 + 144000 1000000 + >; + #cooling-cells = <2>; }; }; @@ -239,8 +252,9 @@ #size-cells = <1>; ranges; - sram-controller@1c00000 { - compatible = "allwinner,sun4i-a10-sram-controller"; + system-control@1c00000 { + compatible = "allwinner,sun7i-a20-system-control", + "allwinner,sun4i-a10-system-control"; reg = <0x01c00000 0x30>; #address-cells = <1>; #size-cells = <1>; @@ -254,7 +268,8 @@ ranges = <0 0x00000000 0xc000>; emac_sram: sram-section@8000 { - compatible = "allwinner,sun4i-a10-sram-a3-a4"; + compatible = "allwinner,sun7i-a20-sram-a3-a4", + "allwinner,sun4i-a10-sram-a3-a4"; reg = <0x8000 0x4000>; status = "disabled"; }; @@ -268,11 +283,26 @@ ranges = <0 0x00010000 0x1000>; otg_sram: sram-section@0 { - compatible = "allwinner,sun4i-a10-sram-d"; + compatible = "allwinner,sun7i-a20-sram-d", + "allwinner,sun4i-a10-sram-d"; reg = <0x0000 0x1000>; status = "disabled"; }; }; + + sram_c: sram@1d00000 { + compatible = "mmio-sram"; + reg = <0x01d00000 0xd0000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x01d00000 0xd0000>; + + ve_sram: sram-section@0 { + compatible = "allwinner,sun7i-a20-sram-c1", + "allwinner,sun4i-a10-sram-c1"; + reg = <0x000000 0x80000>; + }; + }; }; nmi_intc: interrupt-controller@1c00030 { diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 44f3cad3de75..c16ffcc4db7d 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -124,6 +124,28 @@ #size-cells = <1>; ranges; + system-control@1c00000 { + compatible = "allwinner,sun8i-a23-system-control"; + reg = <0x01c00000 0x30>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_c: sram@1d00000 { + compatible = "mmio-sram"; + reg = <0x01d00000 0x80000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x01d00000 0x80000>; + + ve_sram: sram-section@0 { + compatible = "allwinner,sun8i-a23-sram-c1", + "allwinner,sun4i-a10-sram-c1"; + reg = <0x000000 0x80000>; + }; + }; + }; + dma: dma-controller@1c02000 { compatible = "allwinner,sun8i-a23-dma"; reg = <0x01c02000 0x1000>; diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index 8d278ee001e9..4e92741b24a7 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -132,21 +132,30 @@ }; cpu@1 { + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <2>; + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <3>; + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; }; diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts index 36ecebaff3c0..1c012a4def16 100644 --- a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts +++ b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts @@ -79,6 +79,14 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu100 { + cpu-supply = <®_dcdc3>; +}; + &ehci0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts index 3b579d7567c8..c7ce4158d6c8 100644 --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts @@ -107,6 +107,14 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu100 { + cpu-supply = <®_dcdc3>; +}; + &de { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts index 88decb0747ac..e5f0645e53a7 100644 --- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -145,6 +145,14 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu100 { + cpu-supply = <®_dcdc3>; +}; + &ehci0 { /* GL830 USB-to-SATA bridge here */ status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 2be23d600957..00a02b037320 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -902,8 +902,6 @@ reset-names = "stmmaceth"; clocks = <&ccu 27>; clock-names = "stmmaceth"; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; mdio: mdio { diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 41d57c76f290..eec826abb957 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -111,6 +111,28 @@ }; soc { + system-control@1c00000 { + compatible = "allwinner,sun8i-h3-system-control"; + reg = <0x01c00000 0x30>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_c: sram@1d00000 { + compatible = "mmio-sram"; + reg = <0x01d00000 0x80000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x01d00000 0x80000>; + + ve_sram: sram-section@0 { + compatible = "allwinner,sun8i-h3-sram-c1", + "allwinner,sun4i-a10-sram-c1"; + reg = <0x000000 0x80000>; + }; + }; + }; + mali: gpu@1c40000 { compatible = "allwinner,sun8i-h3-mali", "arm,mali-400"; reg = <0x01c40000 0x10000>; diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts index 25fb048c7df2..c39b9169ea64 100644 --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts @@ -59,6 +59,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -94,6 +105,10 @@ }; }; +&de { + status = "okay"; +}; + &ehci1 { status = "okay"; }; @@ -118,6 +133,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { status = "okay"; @@ -226,6 +251,10 @@ regulator-name = "vcc-wifi"; }; +&tcon_tv0 { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index bd97ca3dc2fa..ffd9f00f74a4 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -42,8 +42,10 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/sun8i-de2.h> #include <dt-bindings/clock/sun8i-r40-ccu.h> #include <dt-bindings/reset/sun8i-r40-ccu.h> +#include <dt-bindings/reset/sun8i-de2.h> / { #address-cells = <1>; @@ -99,12 +101,75 @@ }; }; + de: display-engine { + compatible = "allwinner,sun8i-r40-display-engine"; + allwinner,pipelines = <&mixer0>, <&mixer1>; + status = "disabled"; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; + display_clocks: clock@1000000 { + compatible = "allwinner,sun8i-r40-de2-clk", + "allwinner,sun8i-h3-de2-clk"; + reg = <0x01000000 0x100000>; + clocks = <&ccu CLK_DE>, + <&ccu CLK_BUS_DE>; + clock-names = "mod", + "bus"; + resets = <&ccu RST_BUS_DE>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + mixer0: mixer@1100000 { + compatible = "allwinner,sun8i-r40-de2-mixer-0"; + reg = <0x01100000 0x100000>; + clocks = <&display_clocks CLK_BUS_MIXER0>, + <&display_clocks CLK_MIXER0>; + clock-names = "bus", + "mod"; + resets = <&display_clocks RST_MIXER0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mixer0_out: port@1 { + reg = <1>; + mixer0_out_tcon_top: endpoint { + remote-endpoint = <&tcon_top_mixer0_in_mixer0>; + }; + }; + }; + }; + + mixer1: mixer@1200000 { + compatible = "allwinner,sun8i-r40-de2-mixer-1"; + reg = <0x01200000 0x100000>; + clocks = <&display_clocks CLK_BUS_MIXER1>, + <&display_clocks CLK_MIXER1>; + clock-names = "bus", + "mod"; + resets = <&display_clocks RST_WB>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mixer1_out: port@1 { + reg = <1>; + mixer1_out_tcon_top: endpoint { + remote-endpoint = <&tcon_top_mixer1_in_mixer1>; + }; + }; + }; + }; + nmi_intc: interrupt-controller@1c00030 { compatible = "allwinner,sun7i-a20-sc-nmi"; interrupt-controller; @@ -474,8 +539,6 @@ reset-names = "stmmaceth"; clocks = <&ccu CLK_BUS_GMAC>; clock-names = "stmmaceth"; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; gmac_mdio: mdio { @@ -485,6 +548,213 @@ }; }; + tcon_top: tcon-top@1c70000 { + compatible = "allwinner,sun8i-r40-tcon-top"; + reg = <0x01c70000 0x1000>; + clocks = <&ccu CLK_BUS_TCON_TOP>, + <&ccu CLK_TCON_TV0>, + <&ccu CLK_TVE0>, + <&ccu CLK_TCON_TV1>, + <&ccu CLK_TVE1>, + <&ccu CLK_DSI_DPHY>; + clock-names = "bus", + "tcon-tv0", + "tve0", + "tcon-tv1", + "tve1", + "dsi"; + clock-output-names = "tcon-top-tv0", + "tcon-top-tv1", + "tcon-top-dsi"; + resets = <&ccu RST_BUS_TCON_TOP>; + #clock-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon_top_mixer0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon_top_mixer0_in_mixer0: endpoint@0 { + reg = <0>; + remote-endpoint = <&mixer0_out_tcon_top>; + }; + }; + + tcon_top_mixer0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon_top_mixer0_out_tcon_lcd0: endpoint@0 { + reg = <0>; + }; + + tcon_top_mixer0_out_tcon_lcd1: endpoint@1 { + reg = <1>; + }; + + tcon_top_mixer0_out_tcon_tv0: endpoint@2 { + reg = <2>; + remote-endpoint = <&tcon_tv0_in_tcon_top_mixer0>; + }; + + tcon_top_mixer0_out_tcon_tv1: endpoint@3 { + reg = <3>; + remote-endpoint = <&tcon_tv1_in_tcon_top_mixer0>; + }; + }; + + tcon_top_mixer1_in: port@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + tcon_top_mixer1_in_mixer1: endpoint@1 { + reg = <1>; + remote-endpoint = <&mixer1_out_tcon_top>; + }; + }; + + tcon_top_mixer1_out: port@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + tcon_top_mixer1_out_tcon_lcd0: endpoint@0 { + reg = <0>; + }; + + tcon_top_mixer1_out_tcon_lcd1: endpoint@1 { + reg = <1>; + }; + + tcon_top_mixer1_out_tcon_tv0: endpoint@2 { + reg = <2>; + remote-endpoint = <&tcon_tv0_in_tcon_top_mixer1>; + }; + + tcon_top_mixer1_out_tcon_tv1: endpoint@3 { + reg = <3>; + remote-endpoint = <&tcon_tv1_in_tcon_top_mixer1>; + }; + }; + + tcon_top_hdmi_in: port@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + tcon_top_hdmi_in_tcon_tv0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon_tv0_out_tcon_top>; + }; + + tcon_top_hdmi_in_tcon_tv1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon_tv1_out_tcon_top>; + }; + }; + + tcon_top_hdmi_out: port@5 { + reg = <5>; + + tcon_top_hdmi_out_hdmi: endpoint { + remote-endpoint = <&hdmi_in_tcon_top>; + }; + }; + }; + }; + + tcon_tv0: lcd-controller@1c73000 { + compatible = "allwinner,sun8i-r40-tcon-tv"; + reg = <0x01c73000 0x1000>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top 0>; + clock-names = "ahb", "tcon-ch1"; + resets = <&ccu RST_BUS_TCON_TV0>; + reset-names = "lcd"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon_tv0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon_tv0_in_tcon_top_mixer0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>; + }; + + tcon_tv0_in_tcon_top_mixer1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon_top_mixer1_out_tcon_tv0>; + }; + }; + + tcon_tv0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon_tv0_out_tcon_top: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>; + }; + }; + }; + }; + + tcon_tv1: lcd-controller@1c74000 { + compatible = "allwinner,sun8i-r40-tcon-tv"; + reg = <0x01c74000 0x1000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top 1>; + clock-names = "ahb", "tcon-ch1"; + resets = <&ccu RST_BUS_TCON_TV1>; + reset-names = "lcd"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon_tv1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon_tv1_in_tcon_top_mixer0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon_top_mixer0_out_tcon_tv1>; + }; + + tcon_tv1_in_tcon_top_mixer1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon_top_mixer1_out_tcon_tv1>; + }; + }; + + tcon_tv1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon_tv1_out_tcon_top: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon_top_hdmi_in_tcon_tv1>; + }; + }; + }; + }; + gic: interrupt-controller@1c81000 { compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, @@ -495,6 +765,51 @@ #interrupt-cells = <3>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + + hdmi: hdmi@1ee0000 { + compatible = "allwinner,sun8i-r40-dw-hdmi", + "allwinner,sun8i-a83t-dw-hdmi"; + reg = <0x01ee0000 0x10000>; + reg-io-width = <1>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_HDMI0>, <&ccu CLK_HDMI_SLOW>, + <&ccu CLK_HDMI>; + clock-names = "iahb", "isfr", "tmds"; + resets = <&ccu RST_BUS_HDMI1>; + reset-names = "ctrl"; + phys = <&hdmi_phy>; + phy-names = "hdmi-phy"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + reg = <0>; + + hdmi_in_tcon_top: endpoint { + remote-endpoint = <&tcon_top_hdmi_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + reg = <1>; + }; + }; + }; + + hdmi_phy: hdmi-phy@1ef0000 { + compatible = "allwinner,sun8i-r40-hdmi-phy", + "allwinner,sun50i-a64-hdmi-phy"; + reg = <0x01ef0000 0x10000>; + clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>, + <&ccu 7>, <&ccu 16>; + clock-names = "bus", "mod", "pll-0", "pll-1"; + resets = <&ccu RST_BUS_HDMI0>; + reset-names = "phy"; + #phy-cells = <0>; + }; }; timer { diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index eafff16765b4..1788556b4977 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -23,7 +23,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@80000000 { reg = <0x80000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts index 7ed7370ee67a..3d3835591cd2 100644 --- a/arch/arm/boot/dts/tegra114-roth.dts +++ b/arch/arm/boot/dts/tegra114-roth.dts @@ -28,7 +28,7 @@ }; }; - memory { + memory@80000000 { /* memory >= 0x79600000 is reserved for firmware usage */ reg = <0x80000000 0x79600000>; }; diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts index 7fc4a8b31e45..bfdd1bf61816 100644 --- a/arch/arm/boot/dts/tegra114-tn7.dts +++ b/arch/arm/boot/dts/tegra114-tn7.dts @@ -28,7 +28,7 @@ }; }; - memory { + memory@80000000 { /* memory >= 0x37e00000 is reserved for firmware usage */ reg = <0x80000000 0x37e00000>; }; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 84c4358dacac..0d7a6327e404 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -5,11 +5,16 @@ #include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include "skeleton.dtsi" - / { compatible = "nvidia,tegra114"; interrupt-parent = <&lic>; + #address-cells = <1>; + #size-cells = <1>; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x0>; + }; host1x@50000000 { compatible = "nvidia,tegra114-host1x", "simple-bus"; diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi index 3455822350c5..573aaa50fff1 100644 --- a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi @@ -15,7 +15,7 @@ compatible = "toradex,apalis-tk1-v1.2", "toradex,apalis-tk1", "nvidia,tegra124"; - memory { + memory@80000000 { reg = <0x0 0x80000000 0x0 0x80000000>; }; diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi index 9f960c84ba10..0f0d4a4988b9 100644 --- a/arch/arm/boot/dts/tegra124-apalis.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis.dtsi @@ -50,7 +50,7 @@ model = "Toradex Apalis TK1"; compatible = "toradex,apalis-tk1", "nvidia,tegra124"; - memory { + memory@80000000 { reg = <0x0 0x80000000 0x0 0x80000000>; }; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index 6dbcf84dafbc..9151b3ebb839 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -24,7 +24,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@80000000 { reg = <0x0 0x80000000 0x0 0x80000000>; }; diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi index 3609367037a6..d5f11d6d987e 100644 --- a/arch/arm/boot/dts/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -13,7 +13,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@80000000 { reg = <0x0 0x80000000 0x0 0x80000000>; }; diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index 89bcc178994d..82d139648ef1 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -18,7 +18,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@80000000 { reg = <0x0 0x80000000 0x0 0x80000000>; }; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 174092bfac90..183c5acafb22 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -7,14 +7,17 @@ #include <dt-bindings/reset/tegra124-car.h> #include <dt-bindings/thermal/tegra124-soctherm.h> -#include "skeleton.dtsi" - / { compatible = "nvidia,tegra124"; interrupt-parent = <&lic>; #address-cells = <2>; #size-cells = <2>; + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x0>; + }; + pcie@1003000 { compatible = "nvidia,tegra124-pcie"; device_type = "pci"; diff --git a/arch/arm/boot/dts/tegra20-iris-512.dts b/arch/arm/boot/dts/tegra20-colibri-iris.dts index 40126388946d..57f16c0e9917 100644 --- a/arch/arm/boot/dts/tegra20-iris-512.dts +++ b/arch/arm/boot/dts/tegra20-colibri-iris.dts @@ -1,10 +1,10 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -#include "tegra20-colibri-512.dtsi" +#include "tegra20-colibri.dtsi" / { - model = "Toradex Colibri T20 512MB on Iris"; + model = "Toradex Colibri T20 256/512 MB on Iris"; compatible = "toradex,iris", "toradex,colibri_t20-512", "nvidia,tegra20"; aliases { diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri.dtsi index 5c202b3e3bb1..e7b9ab09908a 100644 --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi +++ b/arch/arm/boot/dts/tegra20-colibri.dtsi @@ -2,7 +2,7 @@ #include "tegra20.dtsi" / { - model = "Toradex Colibri T20 512MB"; + model = "Toradex Colibri T20 256/512 MB"; compatible = "toradex,colibri_t20-512", "nvidia,tegra20"; aliases { @@ -10,8 +10,13 @@ rtc1 = "/rtc@7000e000"; }; - memory { - reg = <0x00000000 0x20000000>; + memory@0 { + /* + * Set memory to 256 MB to be safe as this could be used on + * 256 or 512 MB module. It is expected from bootloader + * to fix this up for 512 MB version. + */ + reg = <0x00000000 0x10000000>; }; host1x@50000000 { @@ -213,6 +218,22 @@ GPIO_ACTIVE_HIGH>; }; + nand-controller@70008000 { + status = "okay"; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-bus-width = <8>; + nand-on-flash-bbt; + nand-ecc-algo = "bch"; + nand-is-boot-medium; + nand-ecc-maximize; + wp-gpios = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>; + }; + }; + /* * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier * board) diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index 628a55a9318b..1d96d92b72a7 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -18,7 +18,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { reg = <0x00000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index 30436969adc0..ef245291924f 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -19,7 +19,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { reg = <0x00000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 284aae351ff2..f91441683aad 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -18,7 +18,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { reg = <0x00000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index 872046d48709..20137fc578b1 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -15,7 +15,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { reg = <0x00000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index d55c6b240a30..9eb26dc15f6b 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -18,7 +18,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { reg = <0x00000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index ee3fbf941e79..f44551e2d9d0 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -18,7 +18,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { reg = <0x00000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 983dd5c14794..15b73bd377f0 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -1,14 +1,20 @@ // SPDX-License-Identifier: GPL-2.0 #include <dt-bindings/clock/tegra20-car.h> #include <dt-bindings/gpio/tegra-gpio.h> +#include <dt-bindings/memory/tegra20-mc.h> #include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include "skeleton.dtsi" - / { compatible = "nvidia,tegra20"; interrupt-parent = <&lic>; + #address-cells = <1>; + #size-cells = <1>; + + memory@0 { + device_type = "memory"; + reg = <0 0>; + }; iram@40000000 { compatible = "mmio-sram"; @@ -282,7 +288,8 @@ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */ interrupt-names = "sync-token", "bsev", "sxe"; clocks = <&tegra_car TEGRA20_CLK_VDE>; - resets = <&tegra_car 61>; + reset-names = "vde", "mc"; + resets = <&tegra_car 61>, <&mc TEGRA20_MC_RESET_VDE>; }; apbmisc@70000800 { @@ -425,6 +432,21 @@ status = "disabled"; }; + nand-controller@70008000 { + compatible = "nvidia,tegra20-nand"; + reg = <0x70008000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_NDFLASH>; + clock-names = "nand"; + resets = <&tegra_car 13>; + reset-names = "nand"; + assigned-clocks = <&tegra_car TEGRA20_CLK_NDFLASH>; + assigned-clock-rates = <150000000>; + status = "disabled"; + }; + pwm: pwm@7000a000 { compatible = "nvidia,tegra20-pwm"; reg = <0x7000a000 0x100>; @@ -593,11 +615,12 @@ clock-names = "pclk", "clk32k_in"; }; - memory-controller@7000f000 { + mc: memory-controller@7000f000 { compatible = "nvidia,tegra20-mc"; reg = <0x7000f000 0x024 0x7000f03c 0x3c4>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + #reset-cells = <1>; }; iommu@7000f024 { diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index d1d21ec2a844..2f807d40c1b7 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -10,6 +10,10 @@ model = "Toradex Apalis T30"; compatible = "toradex,apalis_t30", "nvidia,tegra30"; + memory@80000000 { + reg = <0x80000000 0x40000000>; + }; + pcie@3000 { avdd-pexa-supply = <&vdd2_reg>; vdd-pexa-supply = <&vdd2_reg>; @@ -118,6 +122,7 @@ nvidia,function = "spi4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; /* CAN_INT2 */ spi2_cs2_n_pw3 { @@ -585,8 +590,6 @@ /* STMPE811 touch screen controller */ stmpe811@41 { compatible = "st,stmpe811"; - #address-cells = <1>; - #size-cells = <0>; reg = <0x41>; interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&gpio>; @@ -595,7 +598,7 @@ blocks = <0x5>; irq-trigger = <0x1>; - stmpe_touchscreen@0 { + stmpe_touchscreen { compatible = "st,stmpe-ts"; /* 3.25 MHz ADC clock speed */ st,adc-freq = <1>; diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index ae52a5039506..b0d40ac8ac6e 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -17,7 +17,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@80000000 { reg = <0x80000000 0x7ff00000>; }; @@ -1790,9 +1790,6 @@ vccio-supply = <&vdd_5v_in_reg>; regulators { - #address-cells = <1>; - #size-cells = <0>; - vdd1_reg: vdd1 { regulator-name = "vddio_ddr_1v2"; regulator-min-microvolt = <1200000>; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index 92a9740c533f..fb9222b479d2 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -40,7 +40,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@80000000 { reg = <0x80000000 0x40000000>; }; @@ -206,6 +206,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x70>; + reset-gpio = <&gpio TEGRA_GPIO(BB, 0) GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index c44d8c40c410..526ed71cf7a3 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -10,7 +10,7 @@ model = "Toradex Colibri T30"; compatible = "toradex,colibri_t30", "nvidia,tegra30"; - memory { + memory@80000000 { reg = <0x80000000 0x40000000>; }; @@ -351,8 +351,6 @@ /* STMPE811 touch screen controller */ stmpe811@41 { compatible = "st,stmpe811"; - #address-cells = <1>; - #size-cells = <0>; reg = <0x41>; interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&gpio>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 09087b9c5e26..a6781f653310 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -5,11 +5,16 @@ #include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include "skeleton.dtsi" - / { compatible = "nvidia,tegra30"; interrupt-parent = <&lic>; + #address-cells = <1>; + #size-cells = <1>; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x0>; + }; pcie@3000 { compatible = "nvidia,tegra30-pcie"; @@ -404,7 +409,8 @@ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */ interrupt-names = "sync-token", "bsev", "sxe"; clocks = <&tegra_car TEGRA30_CLK_VDE>; - resets = <&tegra_car 61>; + reset-names = "vde", "mc"; + resets = <&tegra_car 61>, <&mc TEGRA30_MC_RESET_VDE>; }; apbmisc@70000800 { @@ -712,6 +718,7 @@ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; + #reset-cells = <1>; }; fuse@7000f800 { diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index 641d96119d4f..e2d1a22c5950 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -36,6 +36,7 @@ enable-method = "psci"; next-level-cache = <&l2>; operating-points-v2 = <&cpu_opp>; + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -46,6 +47,7 @@ enable-method = "psci"; next-level-cache = <&l2>; operating-points-v2 = <&cpu_opp>; + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -56,6 +58,7 @@ enable-method = "psci"; next-level-cache = <&l2>; operating-points-v2 = <&cpu_opp>; + #cooling-cells = <2>; }; }; diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts new file mode 100644 index 000000000000..37777cf22e67 --- /dev/null +++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts @@ -0,0 +1,305 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/* + * Copyright (C) 2018 Zodiac Inflight Innovations + */ + +/dts-v1/; +#include "vf610.dtsi" + +/ { + model = "ZII VF610 CFU1 Board"; + compatible = "zii,vf610cfu1", "zii,vf610dev", "fsl,vf610"; + + chosen { + stdout-path = &uart0; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pinctrl_leds_debug>; + pinctrl-names = "default"; + + led-debug { + label = "zii:green:debug1"; + gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + max-brightness = <1>; + }; + + led-fail { + label = "zii:red:fail"; + gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + default-state = "off"; + max-brightness = <1>; + }; + + led-status { + label = "zii:green:status"; + gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; + default-state = "off"; + max-brightness = <1>; + }; + + led-debug-a { + label = "zii:green:debug_a"; + gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + default-state = "off"; + max-brightness = <1>; + }; + + led-debug-b { + label = "zii:green:debug_b"; + gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; + default-state = "off"; + max-brightness = <1>; + }; + }; + + reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_mcu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&adc0 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&adc1 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&dspi1 { + bus-num = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi1>; + status = "okay"; + + m25p128@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p128", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partition@0 { + label = "m25p128-0"; + reg = <0x0 0x01000000>; + }; + }; +}; + +&edma0 { + status = "okay"; +}; + +&edma1 { + status = "okay"; +}; + +&esdhc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc0>; + bus-width = <8>; + non-removable; + no-1-8-v; + keep-power-in-suspend; + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; + + fixed-link { + speed = <100>; + full-duplex; + }; + + mdio1: mdio { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + switch0: switch0@0 { + compatible = "marvell,mv88e6085"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_switch>; + reg = <0>; + eeprom-length = <512>; + interrupt-parent = <&gpio3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "eth_cu_1000_1"; + }; + + port@1 { + reg = <1>; + label = "eth_cu_1000_2"; + }; + + port@2 { + reg = <2>; + label = "eth_cu_1000_3"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&fec1>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + }; + }; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + status = "okay"; + + pca9554@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + }; + + lm75@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + at24c04@52 { + compatible = "atmel,24c04"; + reg = <0x52>; + label = "nvm"; + }; + + at24c04@54 { + compatible = "atmel,24c04"; + reg = <0x54>; + label = "nameplate"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; +}; + +&iomuxc { + pinctrl_dspi1: dspi1grp { + fsl,pins = < + VF610_PAD_PTD5__DSPI1_CS0 0x1182 + VF610_PAD_PTC6__DSPI1_SIN 0x1181 + VF610_PAD_PTC7__DSPI1_SOUT 0x1182 + VF610_PAD_PTC8__DSPI1_SCK 0x1182 + >; + }; + + pinctrl_esdhc0: esdhc0grp { + fsl,pins = < + VF610_PAD_PTC0__ESDHC0_CLK 0x31ef + VF610_PAD_PTC1__ESDHC0_CMD 0x31ef + VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef + VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef + VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef + VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef + VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef + VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef + VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef + VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTA6__RMII_CLKIN 0x30d1 + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30fe + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; + + pinctrl_i2c0: i2c0grp { + fsl,pins = < + VF610_PAD_PTB14__I2C0_SCL 0x37ff + VF610_PAD_PTB15__I2C0_SDA 0x37ff + >; + }; + + pinctrl_leds_debug: pinctrl-leds-debug { + fsl,pins = < + VF610_PAD_PTD3__GPIO_82 0x31c2 + VF610_PAD_PTE3__GPIO_108 0x31c2 + VF610_PAD_PTE4__GPIO_109 0x31c2 + VF610_PAD_PTE5__GPIO_110 0x31c2 + VF610_PAD_PTE6__GPIO_111 0x31c2 + >; + }; + + pinctrl_switch: switch-grp { + fsl,pins = < + VF610_PAD_PTB28__GPIO_98 0x3061 + VF610_PAD_PTE2__GPIO_107 0x1042 + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + >; + }; +}; diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts new file mode 100644 index 000000000000..fe357668865b --- /dev/null +++ b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts @@ -0,0 +1,341 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/* + * Device tree file for ZII's SSMB SPU3 board + * + * SSMB - SPU3 Switch Management Board + * SPU - Seat Power Unit + * + * Copyright (C) 2015, 2016 Zodiac Inflight Innovations + * + * Based on an original 'vf610-twr.dts' which is Copyright 2015, + * Freescale Semiconductor, Inc. + */ + +/dts-v1/; +#include "vf610.dtsi" + +/ { + model = "ZII VF610 SSMB SPU3 Board"; + compatible = "zii,vf610spu3", "zii,vf610dev", "fsl,vf610"; + + chosen { + stdout-path = &uart0; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pinctrl_leds_debug>; + pinctrl-names = "default"; + + led-debug { + label = "zii:green:debug1"; + gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + max-brightness = <1>; + }; + }; + + reg_vcc_3v3_mcu: regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_mcu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&adc0 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&adc1 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&dspi1 { + bus-num = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi1>; + /* + * Some SPU3s come with SPI-NOR chip DNPed, so we leave this + * node disabled by default and rely on bootloader to enable + * it when appropriate. + */ + status = "disabled"; + + m25p128@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p128", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partition@0 { + label = "m25p128-0"; + reg = <0x0 0x01000000>; + }; + }; +}; + +&edma0 { + status = "okay"; +}; + +&edma1 { + status = "okay"; +}; + +&esdhc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc0>; + bus-width = <8>; + non-removable; + no-1-8-v; + keep-power-in-suspend; + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; + + fixed-link { + speed = <100>; + full-duplex; + }; + + mdio1: mdio { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + switch0: switch0@0 { + compatible = "marvell,mv88e6190"; + pinctrl-0 = <&pinctrl_gpio_switch0>; + pinctrl-names = "default"; + reg = <0>; + eeprom-length = <65536>; + reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&fec1>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "eth_cu_1000_1"; + }; + + port@2 { + reg = <2>; + label = "eth_cu_1000_2"; + }; + + port@3 { + reg = <3>; + label = "eth_cu_1000_3"; + }; + + port@4 { + reg = <4>; + label = "eth_cu_1000_4"; + }; + + port@5 { + reg = <5>; + label = "eth_cu_1000_5"; + }; + + port@6 { + reg = <6>; + label = "eth_cu_1000_6"; + }; + }; + }; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + status = "okay"; + + gpio6: pca9505@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + lm75@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + at24c04@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + label = "nameplate"; + }; + + at24c04@52 { + compatible = "atmel,24c04"; + reg = <0x52>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; + + rave-sp { + compatible = "zii,rave-sp-rdu2"; + current-speed = <1000000>; + #address-cells = <1>; + #size-cells = <1>; + + watchdog { + compatible = "zii,rave-sp-watchdog"; + }; + + eeprom@a3 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa3 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "main-eeprom"; + }; + }; +}; + +&iomuxc { + pinctrl_dspi1: dspi1grp { + fsl,pins = < + VF610_PAD_PTD5__DSPI1_CS0 0x1182 + VF610_PAD_PTD4__DSPI1_CS1 0x1182 + VF610_PAD_PTC6__DSPI1_SIN 0x1181 + VF610_PAD_PTC7__DSPI1_SOUT 0x1182 + VF610_PAD_PTC8__DSPI1_SCK 0x1182 + >; + }; + + pinctrl_esdhc0: esdhc0grp { + fsl,pins = < + VF610_PAD_PTC0__ESDHC0_CLK 0x31ef + VF610_PAD_PTC1__ESDHC0_CMD 0x31ef + VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef + VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef + VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef + VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef + VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef + VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef + VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef + VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTA6__RMII_CLKIN 0x30d1 + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; + + pinctrl_gpio_switch0: pinctrl-gpio-switch0 { + fsl,pins = < + VF610_PAD_PTE2__GPIO_107 0x31c2 + VF610_PAD_PTB28__GPIO_98 0x219d + >; + }; + + pinctrl_i2c0: i2c0grp { + fsl,pins = < + VF610_PAD_PTB14__I2C0_SCL 0x37ff + VF610_PAD_PTB15__I2C0_SDA 0x37ff + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + VF610_PAD_PTB16__I2C1_SCL 0x37ff + VF610_PAD_PTB17__I2C1_SDA 0x37ff + >; + }; + + pinctrl_leds_debug: pinctrl-leds-debug { + fsl,pins = < + VF610_PAD_PTD3__GPIO_82 0x31c2 + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + VF610_PAD_PTB23__UART1_TX 0x21a2 + VF610_PAD_PTB24__UART1_RX 0x21a1 + >; + }; +}; diff --git a/arch/arm/boot/dts/zynq-cc108.dts b/arch/arm/boot/dts/zynq-cc108.dts index 1a0f631c1d8d..8b9ab9bba23b 100644 --- a/arch/arm/boot/dts/zynq-cc108.dts +++ b/arch/arm/boot/dts/zynq-cc108.dts @@ -12,8 +12,8 @@ /include/ "zynq-7000.dtsi" / { + model = "Xilinx CC108 board"; compatible = "xlnx,zynq-cc108", "xlnx,zynq-7000"; - model = "Xilinx Zynq"; aliases { ethernet0 = &gem0; diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts index aa4a0b6defb8..6ed84fb15902 100644 --- a/arch/arm/boot/dts/zynq-microzed.dts +++ b/arch/arm/boot/dts/zynq-microzed.dts @@ -7,8 +7,8 @@ /include/ "zynq-7000.dtsi" / { - model = "Zynq MicroZED Development Board"; - compatible = "xlnx,zynq-microzed", "xlnx,zynq-7000"; + model = "Avnet MicroZed board"; + compatible = "avnet,zynq-microzed", "xlnx,zynq-microzed", "xlnx,zynq-7000"; aliases { ethernet0 = &gem0; diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts index c05f4b67d4c1..54592aeb92b9 100644 --- a/arch/arm/boot/dts/zynq-parallella.dts +++ b/arch/arm/boot/dts/zynq-parallella.dts @@ -12,7 +12,7 @@ /include/ "zynq-7000.dtsi" / { - model = "Adapteva Parallella Board"; + model = "Adapteva Parallella board"; compatible = "adapteva,parallella", "xlnx,zynq-7000"; aliases { diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index f2330b0cb63d..cc5a3dc2b4a0 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -7,13 +7,14 @@ #include "zynq-7000.dtsi" / { - model = "Zynq ZC702 Development Board"; + model = "Xilinx ZC702 board"; compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000"; aliases { ethernet0 = &gem0; i2c0 = &i2c0; serial0 = &uart1; + mmc0 = &sdhci0; }; memory@0 { @@ -28,8 +29,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; sw14 { label = "sw14"; diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts index 3ad1260ff2a1..77943c16d33f 100644 --- a/arch/arm/boot/dts/zynq-zc706.dts +++ b/arch/arm/boot/dts/zynq-zc706.dts @@ -7,13 +7,14 @@ #include "zynq-7000.dtsi" / { - model = "Zynq ZC706 Development Board"; + model = "Xilinx ZC706 board"; compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000"; aliases { ethernet0 = &gem0; i2c0 = &i2c0; serial0 = &uart1; + mmc0 = &sdhci0; }; memory@0 { diff --git a/arch/arm/boot/dts/zynq-zc770-xm010.dts b/arch/arm/boot/dts/zynq-zc770-xm010.dts index 6884f1ad66b7..0e1bfdd3421f 100644 --- a/arch/arm/boot/dts/zynq-zc770-xm010.dts +++ b/arch/arm/boot/dts/zynq-zc770-xm010.dts @@ -8,8 +8,8 @@ #include "zynq-7000.dtsi" / { + model = "Xilinx ZC770 XM010 board"; compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000"; - model = "Xilinx Zynq"; aliases { ethernet0 = &gem0; diff --git a/arch/arm/boot/dts/zynq-zc770-xm011.dts b/arch/arm/boot/dts/zynq-zc770-xm011.dts index b78883cee96a..b7f65862c022 100644 --- a/arch/arm/boot/dts/zynq-zc770-xm011.dts +++ b/arch/arm/boot/dts/zynq-zc770-xm011.dts @@ -8,8 +8,8 @@ #include "zynq-7000.dtsi" / { + model = "Xilinx ZC770 XM011 board"; compatible = "xlnx,zynq-zc770-xm011", "xlnx,zynq-7000"; - model = "Xilinx Zynq"; aliases { i2c0 = &i2c1; diff --git a/arch/arm/boot/dts/zynq-zc770-xm012.dts b/arch/arm/boot/dts/zynq-zc770-xm012.dts index c3169d63600d..d2359b789eb8 100644 --- a/arch/arm/boot/dts/zynq-zc770-xm012.dts +++ b/arch/arm/boot/dts/zynq-zc770-xm012.dts @@ -8,8 +8,8 @@ #include "zynq-7000.dtsi" / { + model = "Xilinx ZC770 XM012 board"; compatible = "xlnx,zynq-zc770-xm012", "xlnx,zynq-7000"; - model = "Xilinx Zynq"; aliases { i2c0 = &i2c0; diff --git a/arch/arm/boot/dts/zynq-zc770-xm013.dts b/arch/arm/boot/dts/zynq-zc770-xm013.dts index 8bb66859d774..651913f1afa2 100644 --- a/arch/arm/boot/dts/zynq-zc770-xm013.dts +++ b/arch/arm/boot/dts/zynq-zc770-xm013.dts @@ -8,8 +8,8 @@ #include "zynq-7000.dtsi" / { + model = "Xilinx ZC770 XM013 board"; compatible = "xlnx,zynq-zc770-xm013", "xlnx,zynq-7000"; - model = "Xilinx Zynq"; aliases { ethernet0 = &gem1; diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts index 53c6883ce1f6..6a5a93aa6552 100644 --- a/arch/arm/boot/dts/zynq-zed.dts +++ b/arch/arm/boot/dts/zynq-zed.dts @@ -7,12 +7,13 @@ #include "zynq-7000.dtsi" / { - model = "Zynq Zed Development Board"; - compatible = "xlnx,zynq-zed", "xlnx,zynq-7000"; + model = "Avnet ZedBoard board"; + compatible = "avnet,zynq-zed", "xlnx,zynq-zed", "xlnx,zynq-7000"; aliases { ethernet0 = &gem0; serial0 = &uart1; + mmc0 = &sdhci0; }; memory@0 { diff --git a/arch/arm/boot/dts/zynq-zturn.dts b/arch/arm/boot/dts/zynq-zturn.dts new file mode 100644 index 000000000000..b38704657960 --- /dev/null +++ b/arch/arm/boot/dts/zynq-zturn.dts @@ -0,0 +1,114 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2015 Andrea Merello <adnrea.merello@gmail.com> + * Copyright (C) 2017 Alexander Graf <agraf@suse.de> + * + * Based on zynq-zed.dts which is: + * Copyright (C) 2011 - 2014 Xilinx + * Copyright (C) 2012 National Instruments Corp. + * + */ + +/dts-v1/; +/include/ "zynq-7000.dtsi" + +/ { + model = "Zynq Z-Turn MYIR Board"; + compatible = "myir,zynq-zturn", "xlnx,zynq-7000"; + + aliases { + ethernet0 = &gem0; + serial0 = &uart1; + serial1 = &uart0; + mmc0 = &sdhci0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x40000000>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-leds { + compatible = "gpio-leds"; + usr-led1 { + label = "usr-led1"; + gpios = <&gpio0 0x0 0x1>; + default-state = "off"; + }; + + usr-led2 { + label = "usr-led2"; + gpios = <&gpio0 0x9 0x1>; + default-state = "off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + K1 { + label = "K1"; + gpios = <&gpio0 0x32 0x1>; + linux,code = <0x66>; + gpio-key,wakeup; + autorepeat; + }; + }; +}; + +&clkc { + ps-clk-frequency = <33333333>; +}; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@0 { + reg = <0x0>; + }; +}; + +&sdhci0 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +&can0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + stlm75@49 { + status = "okay"; + compatible = "lm75"; + reg = <0x49>; + }; + + accelerometer@53 { + compatible = "adi,adxl345", "adxl345", "adi,adxl34x", "adxl34x"; + reg = <0x53>; + interrupt-parent = <&intc>; + interrupts = <0x0 0x1e 0x4>; + }; +}; diff --git a/arch/arm/boot/dts/zynq-zybo-z7.dts b/arch/arm/boot/dts/zynq-zybo-z7.dts index 1e713dc98920..357b78a5c11b 100644 --- a/arch/arm/boot/dts/zynq-zybo-z7.dts +++ b/arch/arm/boot/dts/zynq-zybo-z7.dts @@ -1,9 +1,10 @@ // SPDX-License-Identifier: GPL-2.0+ /dts-v1/; #include "zynq-7000.dtsi" +#include <dt-bindings/gpio/gpio.h> / { - model = "Zynq ZYBO Z7 Development Board"; + model = "Digilent Zybo Z7 board"; compatible = "digilent,zynq-zybo-z7", "xlnx,zynq-7000"; aliases { @@ -13,7 +14,7 @@ memory@0 { device_type = "memory"; - reg = <0x0 0x20000000>; + reg = <0x0 0x40000000>; }; chosen { @@ -21,10 +22,19 @@ stdout-path = "serial0:115200n8"; }; + gpio-leds { + compatible = "gpio-leds"; + + ld4 { + label = "zynq-zybo-z7:green:ld4"; + gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; + }; + }; + usb_phy0: phy0 { #phy-cells = <0>; compatible = "usb-nop-xceiv"; - reset-gpios = <&gpio0 46 1>; + reset-gpios = <&gpio0 46 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/zynq-zybo.dts b/arch/arm/boot/dts/zynq-zybo.dts index a6c00e7fa767..755f6f109d5a 100644 --- a/arch/arm/boot/dts/zynq-zybo.dts +++ b/arch/arm/boot/dts/zynq-zybo.dts @@ -7,12 +7,13 @@ #include "zynq-7000.dtsi" / { - model = "Zynq ZYBO Development Board"; + model = "Digilent Zybo board"; compatible = "digilent,zynq-zybo", "xlnx,zynq-7000"; aliases { ethernet0 = &gem0; serial0 = &uart1; + mmc0 = &sdhci0; }; memory@0 { diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index 1e9f7af8f70f..3157be413297 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -10,7 +10,7 @@ obj-$(CONFIG_DMABOUNCE) += dmabounce.o obj-$(CONFIG_SHARP_LOCOMO) += locomo.o obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o obj-$(CONFIG_SHARP_SCOOP) += scoop.o -obj-$(CONFIG_SMP) += secure_cntvoff.o +obj-$(CONFIG_CPU_V7) += secure_cntvoff.o obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o obj-$(CONFIG_MCPM) += mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o CFLAGS_REMOVE_mcpm_entry.o = -pg diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 7e1c543162c3..8f6be1982545 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -1,5 +1,4 @@ CONFIG_SYSVIPC=y -CONFIG_FHANDLE=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_CGROUPS=y @@ -10,20 +9,10 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_PARTITION_ADVANCED=y CONFIG_CMDLINE_PARTITION=y -CONFIG_ARCH_MULTI_V7=y -# CONFIG_ARCH_MULTI_V5 is not set -# CONFIG_ARCH_MULTI_V4 is not set CONFIG_ARCH_VIRT=y CONFIG_ARCH_ALPINE=y CONFIG_ARCH_ARTPEC=y CONFIG_MACH_ARTPEC6=y -CONFIG_ARCH_MVEBU=y -CONFIG_MACH_ARMADA_370=y -CONFIG_MACH_ARMADA_375=y -CONFIG_MACH_ARMADA_38X=y -CONFIG_MACH_ARMADA_39X=y -CONFIG_MACH_ARMADA_XP=y -CONFIG_MACH_DOVE=y CONFIG_ARCH_AT91=y CONFIG_SOC_SAMA5D2=y CONFIG_SOC_SAMA5D3=y @@ -32,9 +21,9 @@ CONFIG_ARCH_BCM=y CONFIG_ARCH_BCM_CYGNUS=y CONFIG_ARCH_BCM_HR2=y CONFIG_ARCH_BCM_NSP=y -CONFIG_ARCH_BCM_21664=y -CONFIG_ARCH_BCM_281XX=y CONFIG_ARCH_BCM_5301X=y +CONFIG_ARCH_BCM_281XX=y +CONFIG_ARCH_BCM_21664=y CONFIG_ARCH_BCM2835=y CONFIG_ARCH_BCM_63XX=y CONFIG_ARCH_BRCMSTB=y @@ -43,14 +32,14 @@ CONFIG_MACH_BERLIN_BG2=y CONFIG_MACH_BERLIN_BG2CD=y CONFIG_MACH_BERLIN_BG2Q=y CONFIG_ARCH_DIGICOLOR=y +CONFIG_ARCH_EXYNOS=y +CONFIG_EXYNOS5420_MCPM=y CONFIG_ARCH_HIGHBANK=y CONFIG_ARCH_HISI=y CONFIG_ARCH_HI3xxx=y -CONFIG_ARCH_HIX5HD2=y CONFIG_ARCH_HIP01=y CONFIG_ARCH_HIP04=y -CONFIG_ARCH_KEYSTONE=y -CONFIG_ARCH_MESON=y +CONFIG_ARCH_HIX5HD2=y CONFIG_ARCH_MXC=y CONFIG_SOC_IMX50=y CONFIG_SOC_IMX51=y @@ -60,29 +49,30 @@ CONFIG_SOC_IMX6SL=y CONFIG_SOC_IMX6SX=y CONFIG_SOC_IMX6UL=y CONFIG_SOC_IMX7D=y -CONFIG_SOC_VF610=y CONFIG_SOC_LS1021A=y +CONFIG_SOC_VF610=y +CONFIG_ARCH_KEYSTONE=y +CONFIG_ARCH_MEDIATEK=y +CONFIG_ARCH_MESON=y +CONFIG_ARCH_MVEBU=y +CONFIG_MACH_ARMADA_370=y +CONFIG_MACH_ARMADA_375=y +CONFIG_MACH_ARMADA_38X=y +CONFIG_MACH_ARMADA_39X=y +CONFIG_MACH_ARMADA_XP=y +CONFIG_MACH_DOVE=y CONFIG_ARCH_OMAP3=y CONFIG_ARCH_OMAP4=y CONFIG_SOC_OMAP5=y CONFIG_SOC_AM33XX=y CONFIG_SOC_AM43XX=y CONFIG_SOC_DRA7XX=y +CONFIG_ARCH_SIRF=y CONFIG_ARCH_QCOM=y -CONFIG_ARCH_MEDIATEK=y CONFIG_ARCH_MSM8X60=y CONFIG_ARCH_MSM8960=y CONFIG_ARCH_MSM8974=y CONFIG_ARCH_ROCKCHIP=y -CONFIG_ARCH_SOCFPGA=y -CONFIG_PLAT_SPEAR=y -CONFIG_ARCH_SPEAR13XX=y -CONFIG_MACH_SPEAR1310=y -CONFIG_MACH_SPEAR1340=y -CONFIG_ARCH_STI=y -CONFIG_ARCH_STM32=y -CONFIG_ARCH_EXYNOS=y -CONFIG_EXYNOS5420_MCPM=y CONFIG_ARCH_RENESAS=y CONFIG_ARCH_EMEV2=y CONFIG_ARCH_R7S72100=y @@ -99,40 +89,33 @@ CONFIG_ARCH_R8A7792=y CONFIG_ARCH_R8A7793=y CONFIG_ARCH_R8A7794=y CONFIG_ARCH_SH73A0=y +CONFIG_ARCH_SOCFPGA=y +CONFIG_PLAT_SPEAR=y +CONFIG_ARCH_SPEAR13XX=y +CONFIG_MACH_SPEAR1310=y +CONFIG_MACH_SPEAR1340=y +CONFIG_ARCH_STI=y +CONFIG_ARCH_STM32=y CONFIG_ARCH_SUNXI=y -CONFIG_ARCH_SIRF=y CONFIG_ARCH_TEGRA=y -CONFIG_ARCH_TEGRA_2x_SOC=y -CONFIG_ARCH_TEGRA_3x_SOC=y -CONFIG_ARCH_TEGRA_114_SOC=y -CONFIG_ARCH_TEGRA_124_SOC=y CONFIG_ARCH_UNIPHIER=y CONFIG_ARCH_U8500=y -CONFIG_MACH_HREFV60=y -CONFIG_MACH_SNOWBALL=y CONFIG_ARCH_VEXPRESS=y CONFIG_ARCH_VEXPRESS_TC2_PM=y CONFIG_ARCH_WM8850=y CONFIG_ARCH_ZYNQ=y -CONFIG_TRUSTED_FOUNDATIONS=y -CONFIG_PCI=y -CONFIG_PCI_HOST_GENERIC=y -CONFIG_PCI_DRA7XX=y -CONFIG_PCI_DRA7XX_EP=y -CONFIG_PCI_KEYSTONE=y -CONFIG_PCI_MSI=y +CONFIG_PCIEPORTBUS=y CONFIG_PCI_MVEBU=y CONFIG_PCI_TEGRA=y CONFIG_PCI_RCAR_GEN2=y CONFIG_PCIE_RCAR=y -CONFIG_PCIEPORTBUS=y +CONFIG_PCI_DRA7XX_EP=y +CONFIG_PCI_KEYSTONE=y CONFIG_PCI_ENDPOINT=y CONFIG_PCI_ENDPOINT_CONFIGFS=y CONFIG_PCI_EPF_TEST=m CONFIG_SMP=y CONFIG_NR_CPUS=16 -CONFIG_HIGHPTE=y -CONFIG_CMA=y CONFIG_SECCOMP=y CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y @@ -145,14 +128,14 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y +CONFIG_CPUFREQ_DT=y CONFIG_ARM_IMX6Q_CPUFREQ=y CONFIG_QORIQ_CPUFREQ=y CONFIG_CPU_IDLE=y CONFIG_ARM_CPUIDLE=y -CONFIG_NEON=y -CONFIG_KERNEL_MODE_NEON=y CONFIG_ARM_ZYNQ_CPUIDLE=y CONFIG_ARM_EXYNOS_CPUIDLE=y +CONFIG_KERNEL_MODE_NEON=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -170,23 +153,13 @@ CONFIG_IPV6_MIP6=m CONFIG_IPV6_TUNNEL=m CONFIG_IPV6_MULTIPLE_TABLES=y CONFIG_NET_DSA=m -CONFIG_NET_SWITCHDEV=y CONFIG_CAN=y -CONFIG_CAN_RAW=y -CONFIG_CAN_BCM=y -CONFIG_CAN_DEV=y CONFIG_CAN_AT91=m CONFIG_CAN_FLEXCAN=m -CONFIG_CAN_RCAR=m +CONFIG_CAN_SUN4I=y CONFIG_CAN_XILINXCAN=y +CONFIG_CAN_RCAR=m CONFIG_CAN_MCP251X=y -CONFIG_NET_DSA_BCM_SF2=m -CONFIG_B53=m -CONFIG_B53_SPI_DRIVER=m -CONFIG_B53_MDIO_DRIVER=m -CONFIG_B53_MMAP_DRIVER=m -CONFIG_B53_SRAB_DRIVER=m -CONFIG_CAN_SUN4I=y CONFIG_BT=m CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_BCM=y @@ -199,11 +172,9 @@ CONFIG_RFKILL_INPUT=y CONFIG_RFKILL_GPIO=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y -CONFIG_DMA_CMA=y CONFIG_CMA_SIZE_MBYTES=64 CONFIG_OMAP_OCP2SCP=y CONFIG_SIMPLE_PM_BUS=y -CONFIG_SUNXI_RSB=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y @@ -236,7 +207,6 @@ CONFIG_PCI_ENDPOINT_TEST=m CONFIG_EEPROM_AT24=y CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=y -CONFIG_SCSI_MULTI_LUN=y CONFIG_ATA=y CONFIG_SATA_AHCI=y CONFIG_SATA_AHCI_PLATFORM=y @@ -251,14 +221,20 @@ CONFIG_SATA_MV=y CONFIG_SATA_RCAR=y CONFIG_NETDEVICES=y CONFIG_VIRTIO_NET=y -CONFIG_HIX5HD2_GMAC=y +CONFIG_B53_SPI_DRIVER=m +CONFIG_B53_MDIO_DRIVER=m +CONFIG_B53_MMAP_DRIVER=m +CONFIG_B53_SRAB_DRIVER=m +CONFIG_NET_DSA_BCM_SF2=m CONFIG_SUN4I_EMAC=y -CONFIG_MACB=y CONFIG_BCMGENET=m CONFIG_BGMAC_BCMA=y CONFIG_SYSTEMPORT=m +CONFIG_MACB=y CONFIG_NET_CALXEDA_XGMAC=y CONFIG_GIANFAR=y +CONFIG_HIX5HD2_GMAC=y +CONFIG_E1000E=y CONFIG_IGB=y CONFIG_MV643XX_ETH=y CONFIG_MVNETA=y @@ -268,19 +244,17 @@ CONFIG_R8169=y CONFIG_SH_ETH=y CONFIG_SMSC911X=y CONFIG_STMMAC_ETH=y -CONFIG_STMMAC_PLATFORM=y CONFIG_DWMAC_DWC_QOS_ETH=y CONFIG_TI_CPSW=y CONFIG_XILINX_EMACLITE=y CONFIG_AT803X_PHY=y -CONFIG_MARVELL_PHY=y -CONFIG_SMSC_PHY=y CONFIG_BROADCOM_PHY=y CONFIG_ICPLUS_PHY=y -CONFIG_REALTEK_PHY=y +CONFIG_MARVELL_PHY=y CONFIG_MICREL_PHY=y -CONFIG_FIXED_PHY=y +CONFIG_REALTEK_PHY=y CONFIG_ROCKCHIP_PHY=y +CONFIG_SMSC_PHY=y CONFIG_USB_PEGASUS=y CONFIG_USB_RTL8152=m CONFIG_USB_LAN78XX=m @@ -288,29 +262,29 @@ CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y CONFIG_USB_NET_SMSC95XX=y CONFIG_BRCMFMAC=m -CONFIG_RT2X00=m -CONFIG_RT2800USB=m CONFIG_MWIFIEX=m CONFIG_MWIFIEX_SDIO=m +CONFIG_RT2X00=m +CONFIG_RT2800USB=m CONFIG_INPUT_JOYDEV=y CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_QT1070=m CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_TEGRA=y -CONFIG_KEYBOARD_SPEAR=y +CONFIG_KEYBOARD_SAMSUNG=m CONFIG_KEYBOARD_ST_KEYSCAN=y +CONFIG_KEYBOARD_SPEAR=y CONFIG_KEYBOARD_CROS_EC=m -CONFIG_KEYBOARD_SAMSUNG=m CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_MOUSE_CYAPA=m CONFIG_MOUSE_ELAN_I2C=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=m CONFIG_TOUCHSCREEN_MMS114=m +CONFIG_TOUCHSCREEN_WM97XX=m CONFIG_TOUCHSCREEN_ST1232=m CONFIG_TOUCHSCREEN_STMPE=y CONFIG_TOUCHSCREEN_SUN4I=y -CONFIG_TOUCHSCREEN_WM97XX=m CONFIG_INPUT_MISC=y CONFIG_INPUT_MAX77693_HAPTIC=m CONFIG_INPUT_MAX8997_HAPTIC=m @@ -327,13 +301,12 @@ CONFIG_SERIAL_8250_DW=y CONFIG_SERIAL_8250_EM=y CONFIG_SERIAL_8250_MT6577=y CONFIG_SERIAL_8250_UNIPHIER=y +CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_SERIAL_ATMEL_TTYAT=y -CONFIG_SERIAL_BCM63XX=y -CONFIG_SERIAL_BCM63XX_CONSOLE=y CONFIG_SERIAL_MESON=y CONFIG_SERIAL_MESON_CONSOLE=y CONFIG_SERIAL_SAMSUNG=y @@ -345,15 +318,14 @@ CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y CONFIG_SERIAL_SH_SCI=y CONFIG_SERIAL_SH_SCI_NR_UARTS=20 -CONFIG_SERIAL_SH_SCI_CONSOLE=y -CONFIG_SERIAL_SH_SCI_DMA=y CONFIG_SERIAL_MSM=y CONFIG_SERIAL_MSM_CONSOLE=y CONFIG_SERIAL_VT8500=y CONFIG_SERIAL_VT8500_CONSOLE=y -CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SERIAL_OMAP=y CONFIG_SERIAL_OMAP_CONSOLE=y +CONFIG_SERIAL_BCM63XX=y +CONFIG_SERIAL_BCM63XX_CONSOLE=y CONFIG_SERIAL_XILINX_PS_UART=y CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y CONFIG_SERIAL_FSL_LPUART=y @@ -365,12 +337,10 @@ CONFIG_SERIAL_ST_ASC_CONSOLE=y CONFIG_SERIAL_STM32=y CONFIG_SERIAL_STM32_CONSOLE=y CONFIG_SERIAL_DEV_BUS=y -CONFIG_HVC_DRIVER=y CONFIG_VIRTIO_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_ST=y CONFIG_I2C_CHARDEV=y -CONFIG_I2C_DAVINCI=y -CONFIG_I2C_MESON=y -CONFIG_I2C_MUX=y CONFIG_I2C_ARB_GPIO_CHALLENGE=m CONFIG_I2C_MUX_PCA954x=y CONFIG_I2C_MUX_PINCTRL=y @@ -378,12 +348,13 @@ CONFIG_I2C_DEMUX_PINCTRL=y CONFIG_I2C_AT91=m CONFIG_I2C_BCM2835=y CONFIG_I2C_CADENCE=y +CONFIG_I2C_DAVINCI=y CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_I2C_DIGICOLOR=m CONFIG_I2C_EMEV2=m CONFIG_I2C_GPIO=m -CONFIG_I2C_EXYNOS5=y CONFIG_I2C_IMX=y +CONFIG_I2C_MESON=y CONFIG_I2C_MV64XXX=y CONFIG_I2C_RIIC=y CONFIG_I2C_RK3X=y @@ -427,7 +398,6 @@ CONFIG_SPI_SPIDEV=y CONFIG_SPMI=y CONFIG_PINCTRL_AS3722=y CONFIG_PINCTRL_PALMAS=y -CONFIG_PINCTRL_BCM2835=y CONFIG_PINCTRL_APQ8064=y CONFIG_PINCTRL_APQ8084=y CONFIG_PINCTRL_IPQ8064=y @@ -437,25 +407,33 @@ CONFIG_PINCTRL_MSM8X74=y CONFIG_PINCTRL_MSM8916=y CONFIG_PINCTRL_QCOM_SPMI_PMIC=y CONFIG_PINCTRL_QCOM_SSBI_PMIC=y -CONFIG_GPIO_GENERIC_PLATFORM=y CONFIG_GPIO_DAVINCI=y CONFIG_GPIO_DWAPB=y CONFIG_GPIO_EM=y CONFIG_GPIO_RCAR=y +CONFIG_GPIO_SYSCON=y CONFIG_GPIO_UNIPHIER=y CONFIG_GPIO_XILINX=y CONFIG_GPIO_ZYNQ=y CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCA953X_IRQ=y CONFIG_GPIO_PCF857X=y -CONFIG_GPIO_TWL4030=y CONFIG_GPIO_PALMAS=y -CONFIG_GPIO_SYSCON=y CONFIG_GPIO_TPS6586X=y CONFIG_GPIO_TPS65910=y +CONFIG_GPIO_TWL4030=y +CONFIG_POWER_AVS=y +CONFIG_ROCKCHIP_IODOMAIN=y +CONFIG_POWER_RESET_AS3722=y +CONFIG_POWER_RESET_GPIO=y +CONFIG_POWER_RESET_GPIO_RESTART=y +CONFIG_POWER_RESET_ST=y +CONFIG_POWER_RESET_KEYSTONE=y +CONFIG_POWER_RESET_RMOBILE=y CONFIG_BATTERY_ACT8945A=y CONFIG_BATTERY_CPCAP=m CONFIG_BATTERY_SBS=y +CONFIG_AXP20X_POWER=m CONFIG_BATTERY_MAX17040=m CONFIG_BATTERY_MAX17042=m CONFIG_CHARGER_CPCAP=m @@ -464,15 +442,6 @@ CONFIG_CHARGER_MAX77693=m CONFIG_CHARGER_MAX8997=m CONFIG_CHARGER_MAX8998=m CONFIG_CHARGER_TPS65090=y -CONFIG_AXP20X_POWER=m -CONFIG_POWER_RESET_AS3722=y -CONFIG_POWER_RESET_GPIO=y -CONFIG_POWER_RESET_GPIO_RESTART=y -CONFIG_POWER_RESET_KEYSTONE=y -CONFIG_POWER_RESET_RMOBILE=y -CONFIG_POWER_RESET_ST=y -CONFIG_POWER_AVS=y -CONFIG_ROCKCHIP_IODOMAIN=y CONFIG_SENSORS_IIO_HWMON=y CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM95245=y @@ -480,14 +449,12 @@ CONFIG_SENSORS_NTC_THERMISTOR=m CONFIG_SENSORS_PWM_FAN=m CONFIG_SENSORS_INA2XX=m CONFIG_CPU_THERMAL=y -CONFIG_BCM2835_THERMAL=m -CONFIG_BRCMSTB_THERMAL=m CONFIG_IMX_THERMAL=y CONFIG_ROCKCHIP_THERMAL=y CONFIG_RCAR_THERMAL=y CONFIG_ARMADA_THERMAL=y -CONFIG_DAVINCI_WATCHDOG=m -CONFIG_EXYNOS_THERMAL=m +CONFIG_BCM2835_THERMAL=m +CONFIG_BRCMSTB_THERMAL=m CONFIG_ST_THERMAL_MEMMAP=y CONFIG_WATCHDOG=y CONFIG_DA9063_WATCHDOG=m @@ -495,20 +462,24 @@ CONFIG_XILINX_WATCHDOG=y CONFIG_ARM_SP805_WATCHDOG=y CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_SAMA5D4_WATCHDOG=y +CONFIG_DW_WATCHDOG=y +CONFIG_DAVINCI_WATCHDOG=m CONFIG_ORION_WATCHDOG=y CONFIG_RN5T618_WATCHDOG=y -CONFIG_ST_LPC_WATCHDOG=y CONFIG_SUNXI_WATCHDOG=y CONFIG_IMX2_WDT=y +CONFIG_ST_LPC_WATCHDOG=y CONFIG_TEGRA_WATCHDOG=m CONFIG_MESON_WATCHDOG=y -CONFIG_DW_WATCHDOG=y CONFIG_DIGICOLOR_WATCHDOG=y CONFIG_RENESAS_WDT=m -CONFIG_BCM2835_WDT=y CONFIG_BCM47XX_WDT=y -CONFIG_BCM7038_WDT=m +CONFIG_BCM2835_WDT=y CONFIG_BCM_KONA_WDT=y +CONFIG_BCM7038_WDT=m +CONFIG_BCMA_HOST_SOC=y +CONFIG_BCMA_DRIVER_GMAC_CMN=y +CONFIG_BCMA_DRIVER_GPIO=y CONFIG_MFD_ACT8945A=y CONFIG_MFD_AS3711=y CONFIG_MFD_AS3722=y @@ -516,7 +487,6 @@ CONFIG_MFD_ATMEL_FLEXCOM=y CONFIG_MFD_ATMEL_HLCDC=m CONFIG_MFD_BCM590XX=y CONFIG_MFD_AC100=y -CONFIG_MFD_AXP20X=y CONFIG_MFD_AXP20X_I2C=y CONFIG_MFD_AXP20X_RSB=y CONFIG_MFD_CROS_EC=m @@ -529,11 +499,11 @@ CONFIG_MFD_MAX77693=m CONFIG_MFD_MAX8907=y CONFIG_MFD_MAX8997=y CONFIG_MFD_MAX8998=y -CONFIG_MFD_RK808=y CONFIG_MFD_CPCAP=y CONFIG_MFD_PM8XXX=y CONFIG_MFD_QCOM_RPM=y CONFIG_MFD_SPMI_PMIC=y +CONFIG_MFD_RK808=y CONFIG_MFD_RN5T618=y CONFIG_MFD_SEC_CORE=y CONFIG_MFD_STMPE=y @@ -543,10 +513,10 @@ CONFIG_MFD_TPS65217=y CONFIG_MFD_TPS65218=y CONFIG_MFD_TPS6586X=y CONFIG_MFD_TPS65910=y -CONFIG_REGULATOR_ACT8945A=y -CONFIG_REGULATOR_AB8500=y CONFIG_REGULATOR_ACT8865=y +CONFIG_REGULATOR_ACT8945A=y CONFIG_REGULATOR_ANATOP=y +CONFIG_REGULATOR_AB8500=y CONFIG_REGULATOR_AS3711=y CONFIG_REGULATOR_AS3722=y CONFIG_REGULATOR_AXP20X=y @@ -554,10 +524,7 @@ CONFIG_REGULATOR_BCM590XX=y CONFIG_REGULATOR_CPCAP=y CONFIG_REGULATOR_DA9210=y CONFIG_REGULATOR_FAN53555=y -CONFIG_REGULATOR_RK808=y CONFIG_REGULATOR_GPIO=y -CONFIG_MFD_SYSCON=y -CONFIG_POWER_RESET_SYSCON=y CONFIG_REGULATOR_LP872X=y CONFIG_REGULATOR_MAX14577=m CONFIG_REGULATOR_MAX8907=y @@ -571,7 +538,8 @@ CONFIG_REGULATOR_PALMAS=y CONFIG_REGULATOR_PBIAS=y CONFIG_REGULATOR_PWM=y CONFIG_REGULATOR_QCOM_RPM=y -CONFIG_REGULATOR_QCOM_SMD_RPM=y +CONFIG_REGULATOR_QCOM_SMD_RPM=m +CONFIG_REGULATOR_RK808=y CONFIG_REGULATOR_RN5T618=y CONFIG_REGULATOR_S2MPS11=y CONFIG_REGULATOR_S5M8767=y @@ -592,18 +560,17 @@ CONFIG_MEDIA_CEC_SUPPORT=y CONFIG_MEDIA_CONTROLLER=y CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_MEDIA_USB_SUPPORT=y -CONFIG_USB_VIDEO_CLASS=y -CONFIG_USB_GSPCA=y +CONFIG_USB_VIDEO_CLASS=m CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_SOC_CAMERA=m CONFIG_SOC_CAMERA_PLATFORM=m -CONFIG_VIDEO_RCAR_VIN=m -CONFIG_VIDEO_ATMEL_ISI=m CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m CONFIG_VIDEO_S5P_FIMC=m CONFIG_VIDEO_S5P_MIPI_CSIS=m CONFIG_VIDEO_EXYNOS_FIMC_LITE=m CONFIG_VIDEO_EXYNOS4_FIMC_IS=m +CONFIG_VIDEO_RCAR_VIN=m +CONFIG_VIDEO_ATMEL_ISI=m CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m CONFIG_VIDEO_SAMSUNG_S5P_MFC=m @@ -614,19 +581,15 @@ CONFIG_VIDEO_STI_DELTA=m CONFIG_VIDEO_RENESAS_JPU=m CONFIG_VIDEO_RENESAS_VSP1=m CONFIG_V4L_TEST_DRIVERS=y +CONFIG_VIDEO_VIVID=m CONFIG_CEC_PLATFORM_DRIVERS=y CONFIG_VIDEO_SAMSUNG_S5P_CEC=m # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set CONFIG_VIDEO_ADV7180=m CONFIG_VIDEO_ML86V7667=m CONFIG_DRM=y -CONFIG_DRM_I2C_ADV7511=m -CONFIG_DRM_I2C_ADV7511_AUDIO=y # CONFIG_DRM_I2C_CH7006 is not set # CONFIG_DRM_I2C_SIL164 is not set -CONFIG_DRM_DUMB_VGA_DAC=m -CONFIG_DRM_NXP_PTN3460=m -CONFIG_DRM_PARADE_PS8622=m CONFIG_DRM_NOUVEAU=m CONFIG_DRM_EXYNOS=m CONFIG_DRM_EXYNOS_FIMD=y @@ -645,13 +608,18 @@ CONFIG_DRM_RCAR_LVDS=y CONFIG_DRM_SUN4I=m CONFIG_DRM_FSL_DCU=m CONFIG_DRM_TEGRA=y +CONFIG_DRM_PANEL_SIMPLE=y CONFIG_DRM_PANEL_SAMSUNG_LD9040=m CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=m CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m -CONFIG_DRM_PANEL_SIMPLE=y +CONFIG_DRM_DUMB_VGA_DAC=m +CONFIG_DRM_NXP_PTN3460=m +CONFIG_DRM_PARADE_PS8622=m CONFIG_DRM_SII9234=m +CONFIG_DRM_I2C_ADV7511=m +CONFIG_DRM_I2C_ADV7511_AUDIO=y CONFIG_DRM_STI=m -CONFIG_DRM_VC4=y +CONFIG_DRM_VC4=m CONFIG_DRM_ETNAVIV=m CONFIG_DRM_MXSFB=m CONFIG_FB_ARMCLCD=y @@ -659,8 +627,6 @@ CONFIG_FB_EFI=y CONFIG_FB_WM8505=y CONFIG_FB_SH_MOBILE_LCDC=y CONFIG_FB_SIMPLE=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_LCD_PLATFORM=m CONFIG_BACKLIGHT_PWM=y CONFIG_BACKLIGHT_AS3711=y @@ -668,7 +634,6 @@ CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_SOUND=m CONFIG_SND=m -CONFIG_SND_DYNAMIC_MINORS=y CONFIG_SND_HDA_TEGRA=m CONFIG_SND_HDA_INPUT_BEEP=y CONFIG_SND_HDA_PATCH_LOADER=y @@ -692,7 +657,7 @@ CONFIG_SND_SOC_SNOW=m CONFIG_SND_SOC_ODROID=m CONFIG_SND_SOC_SH4_FSI=m CONFIG_SND_SOC_RCAR=m -CONFIG_SND_SIMPLE_SCU_CARD=m +CONFIG_SND_SOC_STI=m CONFIG_SND_SUN4I_CODEC=m CONFIG_SND_SOC_TEGRA=m CONFIG_SND_SOC_TEGRA20_I2S=m @@ -703,31 +668,25 @@ CONFIG_SND_SOC_TEGRA_WM8903=m CONFIG_SND_SOC_TEGRA_WM9712=m CONFIG_SND_SOC_TEGRA_TRIMSLICE=m CONFIG_SND_SOC_TEGRA_ALC5632=m -CONFIG_SND_SOC_CPCAP=m CONFIG_SND_SOC_TEGRA_MAX98090=m CONFIG_SND_SOC_AK4642=m +CONFIG_SND_SOC_CPCAP=m CONFIG_SND_SOC_SGTL5000=m CONFIG_SND_SOC_SPDIF=m -CONFIG_SND_SOC_WM8978=m -CONFIG_SND_SOC_STI=m CONFIG_SND_SOC_STI_SAS=m -CONFIG_SND_SIMPLE_CARD=m +CONFIG_SND_SOC_WM8978=m +CONFIG_SND_SIMPLE_SCU_CARD=m CONFIG_USB=y CONFIG_USB_OTG=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_MVEBU=y -CONFIG_USB_XHCI_RCAR=m CONFIG_USB_XHCI_TEGRA=m CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_MSM=m -CONFIG_USB_EHCI_EXYNOS=y -CONFIG_USB_EHCI_TEGRA=y CONFIG_USB_EHCI_HCD_STI=y -CONFIG_USB_EHCI_HCD_PLATFORM=y -CONFIG_USB_ISP1760=y +CONFIG_USB_EHCI_TEGRA=y +CONFIG_USB_EHCI_EXYNOS=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_STI=y -CONFIG_USB_OHCI_HCD_PLATFORM=y CONFIG_USB_OHCI_EXYNOS=m CONFIG_USB_R8A66597_HCD=m CONFIG_USB_RENESAS_USBHS=m @@ -746,18 +705,18 @@ CONFIG_USB_TI_CPPI41_DMA=y CONFIG_USB_TUSB_OMAP_DMA=y CONFIG_USB_DWC3=y CONFIG_USB_DWC2=y -CONFIG_USB_HSIC_USB3503=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_UDC=y CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_USB_ISP1760=y +CONFIG_USB_HSIC_USB3503=y CONFIG_AB8500_USB=y -CONFIG_KEYSTONE_USB_PHY=y +CONFIG_KEYSTONE_USB_PHY=m CONFIG_NOP_USB_XCEIV=m CONFIG_AM335X_PHY_USB=m CONFIG_TWL6030_USB=m CONFIG_USB_GPIO_VBUS=y CONFIG_USB_ISP1301=y -CONFIG_USB_MSM_OTG=m CONFIG_USB_MXS_PHY=y CONFIG_USB_GADGET=y CONFIG_USB_FSL_USB2=y @@ -793,21 +752,20 @@ CONFIG_MMC_SDHCI_OF_ESDHC=y CONFIG_MMC_SDHCI_ESDHC_IMX=y CONFIG_MMC_SDHCI_DOVE=y CONFIG_MMC_SDHCI_TEGRA=y +CONFIG_MMC_SDHCI_S3C=y CONFIG_MMC_SDHCI_PXAV3=y CONFIG_MMC_SDHCI_SPEAR=y -CONFIG_MMC_SDHCI_S3C=y CONFIG_MMC_SDHCI_S3C_DMA=y CONFIG_MMC_SDHCI_BCM_KONA=y +CONFIG_MMC_MESON_MX_SDIO=y CONFIG_MMC_SDHCI_ST=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y CONFIG_MMC_ATMELMCI=y CONFIG_MMC_SDHCI_MSM=y -CONFIG_MMC_MESON_MX_SDIO=y CONFIG_MMC_MVSDIO=y CONFIG_MMC_SDHI=y CONFIG_MMC_DW=y -CONFIG_MMC_DW_PLTFM=y CONFIG_MMC_DW_EXYNOS=y CONFIG_MMC_DW_ROCKCHIP=y CONFIG_MMC_SH_MMCIF=y @@ -847,94 +805,85 @@ CONFIG_RTC_DRV_MAX77686=y CONFIG_RTC_DRV_RK808=m CONFIG_RTC_DRV_RS5C372=m CONFIG_RTC_DRV_BQ32K=m -CONFIG_RTC_DRV_PALMAS=y -CONFIG_RTC_DRV_ST_LPC=y CONFIG_RTC_DRV_TWL4030=y +CONFIG_RTC_DRV_PALMAS=y CONFIG_RTC_DRV_TPS6586X=y CONFIG_RTC_DRV_TPS65910=y CONFIG_RTC_DRV_S35390A=m CONFIG_RTC_DRV_RX8581=m CONFIG_RTC_DRV_EM3027=y +CONFIG_RTC_DRV_S5M=m CONFIG_RTC_DRV_DA9063=m CONFIG_RTC_DRV_EFI=m CONFIG_RTC_DRV_DIGICOLOR=m -CONFIG_RTC_DRV_S5M=m CONFIG_RTC_DRV_S3C=m CONFIG_RTC_DRV_PL031=y CONFIG_RTC_DRV_AT91RM9200=m CONFIG_RTC_DRV_AT91SAM9=m CONFIG_RTC_DRV_VT8500=y -CONFIG_RTC_DRV_SUN6I=y CONFIG_RTC_DRV_SUNXI=y CONFIG_RTC_DRV_MV=y CONFIG_RTC_DRV_TEGRA=y +CONFIG_RTC_DRV_ST_LPC=y CONFIG_RTC_DRV_CPCAP=m CONFIG_DMADEVICES=y -CONFIG_DW_DMAC=y CONFIG_AT_HDMAC=y CONFIG_AT_XDMAC=y +CONFIG_DMA_BCM2835=y +CONFIG_DMA_SUN6I=y CONFIG_FSL_EDMA=y +CONFIG_IMX_DMA=y +CONFIG_IMX_SDMA=y CONFIG_MV_XOR=y +CONFIG_MXS_DMA=y +CONFIG_PL330_DMA=y +CONFIG_SIRF_DMA=y +CONFIG_STE_DMA40=y +CONFIG_ST_FDMA=m CONFIG_TEGRA20_APB_DMA=y +CONFIG_XILINX_DMA=y +CONFIG_QCOM_BAM_DMA=y +CONFIG_DW_DMAC=y CONFIG_SH_DMAE=y CONFIG_RCAR_DMAC=y CONFIG_RENESAS_USB_DMAC=m -CONFIG_STE_DMA40=y -CONFIG_SIRF_DMA=y -CONFIG_TI_EDMA=y -CONFIG_PL330_DMA=y -CONFIG_IMX_SDMA=y -CONFIG_IMX_DMA=y -CONFIG_MXS_DMA=y -CONFIG_DMA_BCM2835=y -CONFIG_DMA_OMAP=y -CONFIG_QCOM_BAM_DMA=y -CONFIG_XILINX_DMA=y -CONFIG_DMA_SUN6I=y -CONFIG_ST_FDMA=m +CONFIG_VIRTIO_PCI=y +CONFIG_VIRTIO_MMIO=y CONFIG_STAGING=y -CONFIG_SENSORS_ISL29018=y -CONFIG_SENSORS_ISL29028=y CONFIG_MFD_NVEC=y CONFIG_KEYBOARD_NVEC=y CONFIG_SERIO_NVEC_PS2=y CONFIG_NVEC_POWER=y CONFIG_NVEC_PAZ00=y -CONFIG_BCMA=y -CONFIG_BCMA_HOST_SOC=y -CONFIG_BCMA_DRIVER_GMAC_CMN=y -CONFIG_BCMA_DRIVER_GPIO=y -CONFIG_QCOM_GSBI=y -CONFIG_QCOM_PM=y -CONFIG_QCOM_SMEM=y -CONFIG_QCOM_SMD_RPM=y -CONFIG_QCOM_SMP2P=y -CONFIG_QCOM_SMSM=y -CONFIG_QCOM_WCNSS_CTRL=m -CONFIG_ROCKCHIP_PM_DOMAINS=y -CONFIG_COMMON_CLK_QCOM=y -CONFIG_QCOM_CLK_RPM=y -CONFIG_CHROME_PLATFORMS=y CONFIG_STAGING_BOARD=y -CONFIG_CROS_EC_CHARDEV=m CONFIG_COMMON_CLK_MAX77686=y CONFIG_COMMON_CLK_RK808=m CONFIG_COMMON_CLK_S2MPS11=m +CONFIG_COMMON_CLK_QCOM=y +CONFIG_QCOM_CLK_RPM=y CONFIG_APQ_MMCC_8084=y CONFIG_MSM_GCC_8660=y CONFIG_MSM_MMCC_8960=y CONFIG_MSM_MMCC_8974=y -CONFIG_HWSPINLOCK_QCOM=y +CONFIG_BCM2835_MBOX=y CONFIG_ROCKCHIP_IOMMU=y CONFIG_TEGRA_IOMMU_GART=y CONFIG_TEGRA_IOMMU_SMMU=y CONFIG_REMOTEPROC=m CONFIG_ST_REMOTEPROC=m CONFIG_RPMSG_VIRTIO=m +CONFIG_RASPBERRYPI_POWER=y +CONFIG_QCOM_GSBI=y +CONFIG_QCOM_PM=y +CONFIG_QCOM_SMD_RPM=m +CONFIG_QCOM_WCNSS_CTRL=m +CONFIG_ROCKCHIP_PM_DOMAINS=y +CONFIG_ARCH_TEGRA_2x_SOC=y +CONFIG_ARCH_TEGRA_3x_SOC=y +CONFIG_ARCH_TEGRA_114_SOC=y +CONFIG_ARCH_TEGRA_124_SOC=y CONFIG_PM_DEVFREQ=y CONFIG_ARM_TEGRA_DEVFREQ=m -CONFIG_MEMORY=y -CONFIG_EXTCON=y CONFIG_TI_AEMIF=y CONFIG_IIO=y CONFIG_IIO_SW_TRIGGER=y @@ -947,56 +896,54 @@ CONFIG_VF610_ADC=m CONFIG_XILINX_XADC=y CONFIG_MPU3050_I2C=y CONFIG_CM36651=m +CONFIG_SENSORS_ISL29018=y +CONFIG_SENSORS_ISL29028=y CONFIG_AK8975=y -CONFIG_RASPBERRYPI_POWER=y CONFIG_IIO_HRTIMER_TRIGGER=y CONFIG_PWM=y CONFIG_PWM_ATMEL=m CONFIG_PWM_ATMEL_HLCDC_PWM=m CONFIG_PWM_ATMEL_TCB=m +CONFIG_PWM_BCM2835=y +CONFIG_PWM_BRCMSTB=m CONFIG_PWM_FSL_FTM=m CONFIG_PWM_MESON=m CONFIG_PWM_RCAR=m CONFIG_PWM_RENESAS_TPU=y CONFIG_PWM_ROCKCHIP=m CONFIG_PWM_SAMSUNG=m +CONFIG_PWM_STI=y CONFIG_PWM_SUN4I=y CONFIG_PWM_TEGRA=y CONFIG_PWM_VT8500=y +CONFIG_KEYSTONE_IRQ=y +CONFIG_PHY_SUN4I_USB=y +CONFIG_PHY_SUN9I_USB=y CONFIG_PHY_HIX5HD2_SATA=y -CONFIG_E1000E=y -CONFIG_PWM_STI=y -CONFIG_PWM_BCM2835=y -CONFIG_PWM_BRCMSTB=m -CONFIG_PHY_DM816X_USB=m -CONFIG_OMAP_USB2=y -CONFIG_TI_PIPE3=y -CONFIG_TWL4030_USB=m +CONFIG_PHY_BERLIN_SATA=y CONFIG_PHY_BERLIN_USB=y CONFIG_PHY_CPCAP_USB=m -CONFIG_PHY_BERLIN_SATA=y +CONFIG_PHY_QCOM_APQ8064_SATA=m +CONFIG_PHY_RCAR_GEN2=m CONFIG_PHY_ROCKCHIP_DP=m CONFIG_PHY_ROCKCHIP_USB=y -CONFIG_PHY_QCOM_APQ8064_SATA=m +CONFIG_PHY_SAMSUNG_USB2=m CONFIG_PHY_MIPHY28LP=y -CONFIG_PHY_RCAR_GEN2=m CONFIG_PHY_STIH407_USB=y CONFIG_PHY_STM32_USBPHYC=y -CONFIG_PHY_SUN4I_USB=y -CONFIG_PHY_SUN9I_USB=y -CONFIG_PHY_SAMSUNG_USB2=m CONFIG_PHY_TEGRA_XUSB=y -CONFIG_PHY_BRCM_SATA=y -CONFIG_NVMEM=y +CONFIG_PHY_DM816X_USB=m +CONFIG_OMAP_USB2=y +CONFIG_TI_PIPE3=y +CONFIG_TWL4030_USB=m CONFIG_NVMEM_IMX_OCOTP=y CONFIG_NVMEM_SUNXI_SID=y CONFIG_NVMEM_VF610_OCOTP=y -CONFIG_BCM2835_MBOX=y CONFIG_RASPBERRYPI_FIRMWARE=y -CONFIG_EFI_VARS=m -CONFIG_EFI_CAPSULE_LOADER=m CONFIG_BCM47XX_NVRAM=y CONFIG_BCM47XX_SPROM=y +CONFIG_EFI_VARS=m +CONFIG_EFI_CAPSULE_LOADER=m CONFIG_EXT4_FS=y CONFIG_AUTOFS4_FS=y CONFIG_MSDOS_FS=y @@ -1004,7 +951,6 @@ CONFIG_VFAT_FS=y CONFIG_NTFS_FS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_UBIFS_FS=y -CONFIG_TMPFS=y CONFIG_SQUASHFS=y CONFIG_SQUASHFS_LZO=y CONFIG_SQUASHFS_XZ=y @@ -1020,13 +966,7 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=y CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y -CONFIG_LOCKUP_DETECTOR=y -CONFIG_CPUFREQ_DT=y -CONFIG_KEYSTONE_IRQ=y -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_ST=y CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_USER_API_HASH=m CONFIG_CRYPTO_USER_API_SKCIPHER=m @@ -1035,27 +975,19 @@ CONFIG_CRYPTO_USER_API_AEAD=m CONFIG_CRYPTO_DEV_MARVELL_CESA=m CONFIG_CRYPTO_DEV_EXYNOS_RNG=m CONFIG_CRYPTO_DEV_S5P=m +CONFIG_CRYPTO_DEV_ATMEL_AES=m +CONFIG_CRYPTO_DEV_ATMEL_TDES=m +CONFIG_CRYPTO_DEV_ATMEL_SHA=m CONFIG_CRYPTO_DEV_SUN4I_SS=m CONFIG_CRYPTO_DEV_ROCKCHIP=m CONFIG_ARM_CRYPTO=y -CONFIG_CRYPTO_SHA1_ARM=m CONFIG_CRYPTO_SHA1_ARM_NEON=m CONFIG_CRYPTO_SHA1_ARM_CE=m CONFIG_CRYPTO_SHA2_ARM_CE=m -CONFIG_CRYPTO_SHA256_ARM=m CONFIG_CRYPTO_SHA512_ARM=m CONFIG_CRYPTO_AES_ARM=m CONFIG_CRYPTO_AES_ARM_BS=m CONFIG_CRYPTO_AES_ARM_CE=m -CONFIG_CRYPTO_CHACHA20_NEON=m -CONFIG_CRYPTO_CRC32_ARM_CE=m -CONFIG_CRYPTO_CRCT10DIF_ARM_CE=m CONFIG_CRYPTO_GHASH_ARM_CE=m -CONFIG_CRYPTO_DEV_ATMEL_AES=m -CONFIG_CRYPTO_DEV_ATMEL_TDES=m -CONFIG_CRYPTO_DEV_ATMEL_SHA=m -CONFIG_VIDEO_VIVID=m -CONFIG_VIRTIO=y -CONFIG_VIRTIO_PCI=y -CONFIG_VIRTIO_PCI_LEGACY=y -CONFIG_VIRTIO_MMIO=y +CONFIG_CRYPTO_CRC32_ARM_CE=m +CONFIG_CRYPTO_CHACHA20_NEON=m diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index f09e9d66d605..dec130e7078c 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -544,7 +544,7 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs) * Increment event counter and perform fixup for the pre-signal * frame. */ - rseq_signal_deliver(regs); + rseq_signal_deliver(ksig, regs); /* * Set up the stack frame @@ -666,7 +666,7 @@ do_work_pending(struct pt_regs *regs, unsigned int thread_flags, int syscall) } else { clear_thread_flag(TIF_NOTIFY_RESUME); tracehook_notify_resume(regs); - rseq_handle_notify_resume(regs); + rseq_handle_notify_resume(NULL, regs); } } local_irq_disable(); diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 849014c01cf4..563f34d01ce4 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -559,15 +559,20 @@ static const struct pmc_info pmc_infos[] __initconst = { { .uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP }, { .uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP }, { .uhp_udp_mask = AT91SAM926x_PMC_UHP }, + { .uhp_udp_mask = 0 }, }; static const struct of_device_id atmel_pmc_ids[] __initconst = { { .compatible = "atmel,at91rm9200-pmc", .data = &pmc_infos[0] }, { .compatible = "atmel,at91sam9260-pmc", .data = &pmc_infos[1] }, + { .compatible = "atmel,at91sam9261-pmc", .data = &pmc_infos[1] }, + { .compatible = "atmel,at91sam9263-pmc", .data = &pmc_infos[1] }, { .compatible = "atmel,at91sam9g45-pmc", .data = &pmc_infos[2] }, { .compatible = "atmel,at91sam9n12-pmc", .data = &pmc_infos[1] }, + { .compatible = "atmel,at91sam9rl-pmc", .data = &pmc_infos[3] }, { .compatible = "atmel,at91sam9x5-pmc", .data = &pmc_infos[1] }, { .compatible = "atmel,sama5d3-pmc", .data = &pmc_infos[1] }, + { .compatible = "atmel,sama5d4-pmc", .data = &pmc_infos[1] }, { .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] }, { /* sentinel */ }, }; diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index c46a728df44e..25aac6ee2ab1 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -20,6 +20,7 @@ config ARCH_BCM_IPROC select GPIOLIB select ARM_AMBA select PINCTRL + select PCI_DOMAINS if PCI help This enables support for systems based on Broadcom IPROC architected SoCs. The IPROC complex contains one or more ARM CPUs along with common diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index e22fb40e34bc..6d5beb11bd96 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -774,7 +774,7 @@ static struct gpiod_lookup_table mmc_gpios_table = { GPIO_LOOKUP("davinci_gpio.0", DA850_MMCSD_CD_PIN, "cd", GPIO_ACTIVE_LOW), GPIO_LOOKUP("davinci_gpio.0", DA850_MMCSD_WP_PIN, "wp", - GPIO_ACTIVE_LOW), + GPIO_ACTIVE_HIGH), }, }; diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index d0f62eacf59d..4adb901dd5eb 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -10,6 +10,7 @@ menuconfig ARCH_SOCFPGA select HAVE_ARM_SCU select HAVE_ARM_TWD if SMP select MFD_SYSCON + select PCI_DOMAINS if PCI if ARCH_SOCFPGA config SOCFPGA_SUSPEND diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index 8073625371f5..07060e5b5864 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -59,6 +59,9 @@ struct xen_memory_region xen_extra_mem[XEN_EXTRA_MEM_MAX_REGIONS] __initdata; static __read_mostly unsigned int xen_events_irq; +uint32_t xen_start_flags; +EXPORT_SYMBOL(xen_start_flags); + int xen_remap_domain_gfn_array(struct vm_area_struct *vma, unsigned long addr, xen_pfn_t *gfn, int nr, @@ -293,9 +296,7 @@ void __init xen_early_init(void) xen_setup_features(); if (xen_feature(XENFEAT_dom0)) - xen_start_info->flags |= SIF_INITDOMAIN|SIF_PRIVILEGED; - else - xen_start_info->flags &= ~(SIF_INITDOMAIN|SIF_PRIVILEGED); + xen_start_flags |= SIF_INITDOMAIN|SIF_PRIVILEGED; if (!console_set_on_cmdline && !xen_initial_domain()) add_preferred_console("hvc", 0, NULL); diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index d5aeac351fc3..52df25bf4f8c 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -71,6 +71,13 @@ config ARCH_EXYNOS help This enables support for ARMv8 based Samsung Exynos SoC family. +config ARCH_K3 + bool "Texas Instruments Inc. K3 multicore SoC architecture" + select PM_GENERIC_DOMAINS if PM + help + This enables support for Texas Instruments' K3 multicore SoC + architecture. + config ARCH_LAYERSCAPE bool "ARMv8 based Freescale Layerscape SoC family" select EDAC_SUPPORT diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 3543bc324553..4690364d584b 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -23,5 +23,6 @@ subdir-y += rockchip subdir-y += socionext subdir-y += sprd subdir-y += synaptics +subdir-y += ti subdir-y += xilinx subdir-y += zte diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index e6b059378dc0..d033da401c26 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -119,6 +119,12 @@ #clock-cells = <0>; compatible = "fixed-clock"; }; + + qspi_clk: qspi-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <200000000>; + }; }; gmac0: ethernet@ff800000 { @@ -127,8 +133,8 @@ interrupts = <0 90 4>; interrupt-names = "macirq"; mac-address = [00 00 00 00 00 00]; - resets = <&rst EMAC0_RESET>; - reset-names = "stmmaceth"; + resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>; + reset-names = "stmmaceth", "stmmaceth-ocp"; clocks = <&clkmgr STRATIX10_EMAC0_CLK>; clock-names = "stmmaceth"; status = "disabled"; @@ -140,8 +146,8 @@ interrupts = <0 91 4>; interrupt-names = "macirq"; mac-address = [00 00 00 00 00 00]; - resets = <&rst EMAC1_RESET>; - reset-names = "stmmaceth"; + resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>; + reset-names = "stmmaceth", "stmmaceth-ocp"; clocks = <&clkmgr STRATIX10_EMAC1_CLK>; clock-names = "stmmaceth"; status = "disabled"; @@ -153,8 +159,8 @@ interrupts = <0 92 4>; interrupt-names = "macirq"; mac-address = [00 00 00 00 00 00]; - resets = <&rst EMAC2_RESET>; - reset-names = "stmmaceth"; + resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>; + reset-names = "stmmaceth", "stmmaceth-ocp"; clocks = <&clkmgr STRATIX10_EMAC2_CLK>; clock-names = "stmmaceth"; status = "disabled"; @@ -309,8 +315,8 @@ interrupts = <0 99 4>; resets = <&rst SPIM0_RESET>; reg-io-width = <4>; - num-chipselect = <4>; - bus-num = <0>; + num-cs = <4>; + clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>; status = "disabled"; }; @@ -322,8 +328,8 @@ interrupts = <0 100 4>; resets = <&rst SPIM1_RESET>; reg-io-width = <4>; - num-chipselect = <4>; - bus-num = <0>; + num-cs = <4>; + clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>; status = "disabled"; }; @@ -409,6 +415,7 @@ phy-names = "usb2-phy"; resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>; reset-names = "dwc2", "dwc2-ecc"; + clocks = <&clkmgr STRATIX10_USB_CLK>; status = "disabled"; }; @@ -420,6 +427,7 @@ phy-names = "usb2-phy"; resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>; reset-names = "dwc2", "dwc2-ecc"; + clocks = <&clkmgr STRATIX10_USB_CLK>; status = "disabled"; }; @@ -428,6 +436,7 @@ reg = <0xffd00200 0x100>; interrupts = <0 117 4>; resets = <&rst WATCHDOG0_RESET>; + clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>; status = "disabled"; }; @@ -436,6 +445,7 @@ reg = <0xffd00300 0x100>; interrupts = <0 118 4>; resets = <&rst WATCHDOG1_RESET>; + clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>; status = "disabled"; }; @@ -444,6 +454,7 @@ reg = <0xffd00400 0x100>; interrupts = <0 125 4>; resets = <&rst WATCHDOG2_RESET>; + clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>; status = "disabled"; }; @@ -452,6 +463,7 @@ reg = <0xffd00500 0x100>; interrupts = <0 126 4>; resets = <&rst WATCHDOG3_RESET>; + clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>; status = "disabled"; }; @@ -466,5 +478,20 @@ interrupts = <16 4>, <48 4>; }; }; + + qspi: spi@ff8d2000 { + compatible = "cdns,qspi-nor"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xff8d2000 0x100>, + <0xff900000 0x100000>; + interrupts = <0 3 4>; + cdns,fifo-depth = <128>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x00000000>; + clocks = <&qspi_clk>; + + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts index f9b1ef12db48..6edc4fa9fd42 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts @@ -147,3 +147,38 @@ reg = <0x68>; }; }; + +&qspi { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q00a"; + reg = <0>; + spi-max-frequency = <50000000>; + + m25p,fast-read; + cdns,page-size = <256>; + cdns,block-size = <16>; + cdns,read-delay = <1>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + qspi_boot: partition@0 { + label = "Boot and fpga data"; + reg = <0x0 0x4000000>; + }; + + qspi_rootfs: partition@4000000 { + label = "Root Filesystem - JFFS2"; + reg = <0x4000000 0x4000000>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 34dd0e9b5cbb..a97c0e2d7bc6 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -17,6 +17,9 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts index 4b3331fbfe39..fd90fa4a282c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts @@ -6,16 +6,67 @@ /dts-v1/; #include "meson-axg.dtsi" +#include <dt-bindings/input/input.h> / { compatible = "amlogic,s400", "amlogic,a113d", "amlogic,meson-axg"; model = "Amlogic Meson AXG S400 Development Board"; + adc_keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + + button-next { + label = "Next"; + linux,code = <KEY_NEXT>; + press-threshold-microvolt = <1116000>; /* 62% */ + }; + + button-prev { + label = "Previous"; + linux,code = <KEY_PREVIOUS>; + press-threshold-microvolt = <900000>; /* 50% */ + }; + + button-wifi { + label = "Wifi"; + linux,code = <KEY_WLAN>; + press-threshold-microvolt = <684000>; /* 38% */ + }; + + button-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + press-threshold-microvolt = <468000>; /* 26% */ + }; + + button-down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + press-threshold-microvolt = <252000>; /* 14% */ + }; + + button-voice { + label = "Voice"; + linux,code = <KEY_VOICECOMMAND>; + press-threshold-microvolt = <0>; /* 0% */ + }; + }; + aliases { serial0 = &uart_AO; serial1 = &uart_A; }; + main_12v: regulator-main_12v { + compatible = "regulator-fixed"; + regulator-name = "12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + vddio_boot: regulator-vddio_boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; @@ -62,13 +113,60 @@ clock-frequency = <32768>; pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */ }; + + speaker-leds { + compatible = "gpio-leds"; + + aled1 { + label = "speaker:aled1"; + gpios = <&gpio_speaker 7 0>; + }; + + aled2 { + label = "speaker:aled2"; + gpios = <&gpio_speaker 6 0>; + }; + + aled3 { + label = "speaker:aled3"; + gpios = <&gpio_speaker 5 0>; + }; + + aled4 { + label = "speaker:aled4"; + gpios = <&gpio_speaker 4 0>; + }; + + aled5 { + label = "speaker:aled5"; + gpios = <&gpio_speaker 3 0>; + }; + + aled6 { + label = "speaker:aled6"; + gpios = <&gpio_speaker 2 0>; + }; + }; }; ðmac { status = "okay"; - phy-mode = "rgmii"; pinctrl-0 = <ð_rgmii_y_pins>; pinctrl-names = "default"; + phy-handle = <ð_phy0>; + phy-mode = "rgmii"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + eee-broken-1000t; + }; + }; }; &uart_A { @@ -93,12 +191,33 @@ status = "okay"; pinctrl-0 = <&i2c1_z_pins>; pinctrl-names = "default"; + + speaker_amp1: audio-codec@1b { + compatible = "ti,tas5707"; + reg = <0x1b>; + reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + AVDD-supply = <&vcc_3v3>; + DVDD-supply = <&vcc_3v3>; + PVDD_A-supply = <&main_12v>; + PVDD_B-supply = <&main_12v>; + PVDD_C-supply = <&main_12v>; + PVDD_D-supply = <&main_12v>; + }; }; &i2c_AO { status = "okay"; pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>; pinctrl-names = "default"; + + gpio_speaker: gpio-controller@1f { + compatible = "nxp,pca9557"; + reg = <0x1f>; + gpio-controller; + #gpio-cells = <2>; + vcc-supply = <&vddao_3v3>; + }; }; &pwm_ab { @@ -153,3 +272,8 @@ compatible = "brcm,bcm4329-fmac"; }; }; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index fee87737a201..6adc8d3dbf0a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/axg-audio-clkc.h> #include <dt-bindings/clock/axg-clkc.h> #include <dt-bindings/clock/axg-aoclkc.h> #include <dt-bindings/gpio/meson-axg-gpio.h> @@ -132,7 +133,7 @@ sd_emmc_b: sd@5000 { compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0x5000 0x0 0x2000>; + reg = <0x0 0x5000 0x0 0x800>; interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>; status = "disabled"; clocks = <&clkc CLKID_SD_EMMC_B>, @@ -144,7 +145,7 @@ sd_emmc_c: mmc@7000 { compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0x7000 0x0 0x2000>; + reg = <0x0 0x7000 0x0 0x800>; interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>; status = "disabled"; clocks = <&clkc CLKID_SD_EMMC_C>, @@ -155,6 +156,41 @@ }; }; + audio: bus@ff642000 { + compatible = "simple-bus"; + reg = <0x0 0xff642000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff642000 0x0 0x2000>; + + clkc_audio: clock-controller@0 { + compatible = "amlogic,axg-audio-clkc"; + reg = <0x0 0x0 0x0 0xb4>; + #clock-cells = <1>; + + clocks = <&clkc CLKID_AUDIO>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL3>, + <&clkc CLKID_HIFI_PLL>, + <&clkc CLKID_FCLK_DIV3>, + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_GP0_PLL>; + clock-names = "pclk", + "mst_in0", + "mst_in1", + "mst_in2", + "mst_in3", + "mst_in4", + "mst_in5", + "mst_in6", + "mst_in7"; + + resets = <&reset RESET_AUDIO>; + }; + }; + cbus: bus@ffd00000 { compatible = "simple-bus"; reg = <0x0 0xffd00000 0x0 0x25000>; @@ -477,6 +513,48 @@ }; }; + pdm_dclk_a14_pins: pdm_dclk_a14 { + mux { + groups = "pdm_dclk_a14"; + function = "pdm"; + }; + }; + + pdm_dclk_a19_pins: pdm_dclk_a19 { + mux { + groups = "pdm_dclk_a19"; + function = "pdm"; + }; + }; + + pdm_din0_pins: pdm_din0 { + mux { + groups = "pdm_din0"; + function = "pdm"; + }; + }; + + pdm_din1_pins: pdm_din1 { + mux { + groups = "pdm_din1"; + function = "pdm"; + }; + }; + + pdm_din2_pins: pdm_din2 { + mux { + groups = "pdm_din2"; + function = "pdm"; + }; + }; + + pdm_din3_pins: pdm_din3 { + mux { + groups = "pdm_din3"; + function = "pdm"; + }; + }; + pwm_a_a_pins: pwm_a_a { mux { groups = "pwm_a_a"; @@ -561,6 +639,76 @@ }; }; + spdif_in_z_pins: spdif_in_z { + mux { + groups = "spdif_in_z"; + function = "spdif_in"; + }; + }; + + spdif_in_a1_pins: spdif_in_a1 { + mux { + groups = "spdif_in_a1"; + function = "spdif_in"; + }; + }; + + spdif_in_a7_pins: spdif_in_a7 { + mux { + groups = "spdif_in_a7"; + function = "spdif_in"; + }; + }; + + spdif_in_a19_pins: spdif_in_a19 { + mux { + groups = "spdif_in_a19"; + function = "spdif_in"; + }; + }; + + spdif_in_a20_pins: spdif_in_a20 { + mux { + groups = "spdif_in_a20"; + function = "spdif_in"; + }; + }; + + spdif_out_z_pins: spdif_out_z { + mux { + groups = "spdif_out_z"; + function = "spdif_out"; + }; + }; + + spdif_out_a1_pins: spdif_out_a1 { + mux { + groups = "spdif_out_a1"; + function = "spdif_out"; + }; + }; + + spdif_out_a11_pins: spdif_out_a11 { + mux { + groups = "spdif_out_a11"; + function = "spdif_out"; + }; + }; + + spdif_out_a19_pins: spdif_out_a19 { + mux { + groups = "spdif_out_a19"; + function = "spdif_out"; + }; + }; + + spdif_out_a20_pins: spdif_out_a20 { + mux { + groups = "spdif_out_a20"; + function = "spdif_out"; + }; + }; + spi0_pins: spi0 { mux { groups = "spi0_miso", @@ -1194,6 +1342,20 @@ interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; + + saradc: adc@9000 { + compatible = "amlogic,meson-axg-saradc", + "amlogic,meson-saradc"; + reg = <0x0 0x9000 0x0 0x38>; + #io-channel-cells = <1>; + interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, + <&clkc_AO CLKID_AO_SAR_ADC>, + <&clkc_AO CLKID_AO_SAR_ADC_CLK>, + <&clkc_AO CLKID_AO_SAR_ADC_SEL>; + clock-names = "clkin", "core", "adc_clk", "adc_sel"; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index 88e712ea757a..765247bc4f24 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -35,6 +35,13 @@ regulator-always-on; }; + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vddio_boot: regulator-vddio_boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; @@ -140,6 +147,11 @@ clock-names = "clkin0"; }; +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; + /* Wireless SDIO Module */ &sd_emmc_a { status = "okay"; @@ -160,11 +172,6 @@ vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_boot>; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; }; /* SD card */ diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 3c31e21cbed7..b8dc4dbb391b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -35,6 +35,12 @@ no-map; }; + /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */ + secmon_reserved_alt: secmon@5000000 { + reg = <0x0 0x05000000 0x0 0x300000>; + no-map; + }; + linux,cma { compatible = "shared-dma-pool"; reusable; @@ -457,21 +463,21 @@ sd_emmc_a: mmc@70000 { compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; - reg = <0x0 0x70000 0x0 0x2000>; + reg = <0x0 0x70000 0x0 0x800>; interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; sd_emmc_b: mmc@72000 { compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; - reg = <0x0 0x72000 0x0 0x2000>; + reg = <0x0 0x72000 0x0 0x800>; interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; sd_emmc_c: mmc@74000 { compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; - reg = <0x0 0x74000 0x0 0x2000>; + reg = <0x0 0x74000 0x0 0x800>; interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts index 7d5709c37e95..cbe99bd4e06d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts @@ -106,6 +106,42 @@ compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; }; + + /* CVBS is available on CON1 pin 36, disabled by default */ + cvbs-connector { + compatible = "composite-video-connector"; + status = "disabled"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; +}; + +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; }; ðmac { @@ -137,6 +173,18 @@ }; }; +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + &ir { status = "okay"; pinctrl-0 = <&remote_input_ao_pins>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi index eb327664a4d8..6aaafff674f9 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi @@ -6,7 +6,7 @@ &apb { mali: gpu@c0000 { - compatible = "amlogic,meson-gxbb-mali", "arm,mali-450"; + compatible = "amlogic,meson-gxl-mali", "arm,mali-450"; reg = <0x0 0xc0000 0x0 0x40000>; interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts new file mode 100644 index 000000000000..70433e023fda --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts @@ -0,0 +1,218 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 BayLibre, SAS. + * Author: Neil Armstrong <narmstrong@baylibre.com> + * Author: Jerome Brunet <jbrunet@baylibre.com> + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> + +#include "meson-gxl-s905x.dtsi" + +/ { + compatible = "amlogic,p241", "amlogic,s805x", "amlogic,meson-gxl"; + model = "Amlogic Meson GXL (S805X) P241 Development Board"; + + aliases { + serial0 = &uart_AO; + serial1 = &uart_A; + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x20000000>; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; +}; + +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +ðmac { + status = "okay"; +}; + +&internal_phy { + pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>; + pinctrl-names = "default"; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; + +/* Wireless SDIO Module */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; + +/* This is connected to the Bluetooth module: */ +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts index a9f9bb90a877..15014faa2ab2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts @@ -41,13 +41,6 @@ }; }; - vddio_ao18: regulator-vddio_ao18 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - hdmi-connector { compatible = "hdmi-connector"; type = "a"; @@ -108,7 +101,9 @@ }; }; -&saradc { - status = "okay"; - vref-supply = <&vddio_ao18>; +&sd_emmc_a { + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts index 80a231476b80..92c425d0259c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts @@ -19,3 +19,10 @@ phy-mode = "rmii"; phy-handle = <&internal_phy>; }; + +&sd_emmc_a { + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dts new file mode 100644 index 000000000000..6509c4950950 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>. + * Based on meson-gxl-s905d-p231.dts: + * - Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + */ + +/dts-v1/; + +#include "meson-gxl-s905x.dtsi" +#include "meson-gx-p23x-q20x.dtsi" + +/ { + compatible = "amlogic,p281", "amlogic,s905w", "amlogic,meson-gxl"; + model = "Amlogic Meson GXL (S905W) P281 Development Board"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts new file mode 100644 index 000000000000..789c819c99c4 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>. + * Based on meson-gxl-s905d-p231.dts: + * - Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + */ + +/dts-v1/; + +#include "meson-gxl-s905x.dtsi" +#include "meson-gx-p23x-q20x.dtsi" + +/ { + compatible = "oranth,tx3-mini", "amlogic,s905w", "amlogic,meson-gxl"; + model = "Oranth Tanix TX3 Mini"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; /* 1 GiB or 2 GiB */ + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index 3e3eb31748a3..f63bceb88caa 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -234,9 +234,6 @@ bus-width = <4>; cap-sd-highspeed; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; max-frequency = <100000000>; disable-wp; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi index 0cfd701809de..a1b31013ab6e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi @@ -189,3 +189,10 @@ &usb0 { status = "okay"; }; + +&usb2_phy0 { + /* + * HDMI_5V is also used as supply for the USB VBUS. + */ + phy-supply = <&hdmi_5v>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 27538eea547b..c87a80e9bcc6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -13,14 +13,6 @@ / { compatible = "amlogic,meson-gxl"; - reserved-memory { - /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */ - secmon_reserved_alt: secmon@5000000 { - reg = <0x0 0x05000000 0x0 0x300000>; - no-map; - }; - }; - soc { usb0: usb@c9000000 { status = "disabled"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts index 0868da476e41..313f88f8759e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts @@ -209,10 +209,34 @@ #cooling-cells = <2>; }; +&cpu1 { + #cooling-cells = <2>; +}; + +&cpu2 { + #cooling-cells = <2>; +}; + +&cpu3 { + #cooling-cells = <2>; +}; + &cpu4 { #cooling-cells = <2>; }; +&cpu5 { + #cooling-cells = <2>; +}; + +&cpu6 { + #cooling-cells = <2>; +}; + +&cpu7 { + #cooling-cells = <2>; +}; + ðmac { pinctrl-0 = <ð_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts index 101417298a1d..73d656e4aade 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts @@ -40,13 +40,6 @@ gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; }; }; - - vddio_ao18: regulator-vddio_ao18 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; }; /* Q200 has exclusive choice between internal or external PHY */ @@ -79,7 +72,9 @@ }; }; -&saradc { - status = "okay"; - vref-supply = <&vddio_ao18>; +&sd_emmc_a { + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts index 8d132b17514a..d02b80d77378 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts @@ -19,3 +19,10 @@ phy-mode = "rmii"; phy-handle = <&internal_phy>; }; + +&sd_emmc_a { + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi index 4a2a6af8e752..4057197048dc 100644 --- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi @@ -118,7 +118,7 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 281 IRQ_TYPE_NONE>; + interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>; linux,pci-domain = <0>; @@ -149,7 +149,7 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 305 IRQ_TYPE_NONE>; + interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; linux,pci-domain = <4>; @@ -566,7 +566,7 @@ reg = <0x66080000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <GIC_SPI 394 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <100000>; status = "disabled"; }; @@ -594,7 +594,7 @@ reg = <0x660b0000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <GIC_SPI 395 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <100000>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/broadcom/stingray/Makefile b/arch/arm64/boot/dts/broadcom/stingray/Makefile index c4d06cffcb11..20c7d0aa6cb7 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/Makefile +++ b/arch/arm64/boot/dts/broadcom/stingray/Makefile @@ -1,3 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958742k.dtb dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958742t.dtb + +dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958802a802x.dtb diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi index 8862ec907fd8..bc299c3d9068 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi @@ -30,20 +30,9 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -#include "stingray.dtsi" +#include "stingray-board-base.dtsi" / { - chosen { - stdout-path = "serial0:115200n8"; - }; - - aliases { - serial0 = &uart1; - serial1 = &uart0; - serial2 = &uart2; - serial3 = &uart3; - }; - sdio0_vddo_ctrl_reg: sdio0_vddo_ctrl { compatible = "regulator-gpio"; regulator-name = "sdio0_vddo_ctrl_reg"; @@ -67,11 +56,6 @@ }; }; -&memory { /* Default DRAM banks */ - reg = <0x00000000 0x80000000 0x0 0x80000000>, /* 2G @ 2G */ - <0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */ -}; - &sata0 { status = "okay"; }; @@ -136,18 +120,6 @@ status = "okay"; }; -&mdio_mux_iproc { - mdio@10 { - gphy0: eth-phy@10 { - reg = <0x10>; - }; - }; -}; - -&uart1 { - status = "okay"; -}; - &pwm { status = "okay"; }; @@ -175,8 +147,6 @@ }; &enet { - phy-mode = "rgmii-id"; - phy-handle = <&gphy0>; status = "okay"; }; @@ -197,13 +167,10 @@ &sdio0 { vqmmc-supply = <&sdio0_vddo_ctrl_reg>; - non-removable; - full-pwr-cycle; status = "okay"; }; &sdio1 { vqmmc-supply = <&sdio1_vddo_ctrl_reg>; - full-pwr-cycle; status = "okay"; }; diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts index eb6f08cdbd79..77efa28c4dd5 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts @@ -43,6 +43,10 @@ enet-phy-lane-swap; }; +&sdio0 { + mmc-ddr-1_8v; +}; + &uart2 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts index 5084b037320f..55ba495ef56e 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts @@ -42,3 +42,7 @@ &gphy0 { enet-phy-lane-swap; }; + +&sdio0 { + mmc-ddr-1_8v; +}; diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958802a802x.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958802a802x.dts new file mode 100644 index 000000000000..a41facd7d79b --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958802a802x.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause) +/* + *Copyright(c) 2018 Broadcom + */ + +/dts-v1/; + +#include "stingray-board-base.dtsi" + +/ { + compatible = "brcm,bcm958802a802x", "brcm,stingray"; + model = "Stingray PS225xx (BCM958802A802x)"; +}; + +&enet { + status = "disabled"; +}; + +&sdio0 { + no-1-8-v; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi new file mode 100644 index 000000000000..82a24711d0d8 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause) +/* + * Copyright(c) 2016-2018 Broadcom + */ + +#include "stingray.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + aliases { + serial0 = &uart1; + serial1 = &uart0; + serial2 = &uart2; + serial3 = &uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&memory { /* Default DRAM banks */ + reg = <0x00000000 0x80000000 0x0 0x80000000>, /* 2G @ 2G */ + <0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */ +}; + +&enet { + phy-mode = "rgmii-id"; + phy-handle = <&gphy0>; +}; + +&uart1 { + status = "okay"; +}; + +&sdio0 { + non-removable; + full-pwr-cycle; +}; + +&sdio1 { + full-pwr-cycle; +}; + +&mdio_mux_iproc { + mdio@10 { + gphy0: eth-phy@10 { + reg = <0x10>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi index 3a4d4524b5ed..10a106aca229 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi @@ -52,12 +52,24 @@ reg = <0x0001d104 0x32>, <0x0001c854 0x4>; clocks = <&osc>; - clock-output-names = "genpll0", "clk_125", "clk_scr", + clock-output-names = "genpll0", "clk_125m", "clk_scr", "clk_250", "clk_pcie_axi", "clk_paxc_axi_x2", "clk_paxc_axi"; }; + genpll2: genpll2@1d1ac { + #clock-cells = <1>; + compatible = "brcm,sr-genpll2"; + reg = <0x0001d1ac 0x32>, + <0x0001c854 0x4>; + clocks = <&osc>; + clock-output-names = "genpll2", "clk_nic", + "clk_ts_500_ref", "clk_125_nitro", + "clk_chimp", "clk_nic_flash", + "clk_fs"; + }; + genpll3: genpll3@1d1e0 { #clock-cells = <1>; compatible = "brcm,sr-genpll3"; @@ -75,8 +87,8 @@ <0x0001c854 0x4>; clocks = <&osc>; clock-output-names = "genpll4", "clk_ccn", - "clk_tpiu_pll", "noc_clk", - "pll_chclk_fs4", + "clk_tpiu_pll", "clk_noc", + "clk_chclk_fs4", "clk_bridge_fscpu"; }; @@ -86,8 +98,8 @@ reg = <0x0001d248 0x32>, <0x0001c870 0x4>; clocks = <&osc>; - clock-output-names = "genpll5", "fs4_hf_clk", - "crypto_ae_clk", "raid_ae_clk"; + clock-output-names = "genpll5", "clk_fs4_hf", + "clk_crypto_ae", "clk_raid_ae"; }; lcpll0: lcpll0@1d0c4 { @@ -107,9 +119,9 @@ reg = <0x0001d138 0x3c>, <0x0001c870 0x4>; clocks = <&osc>; - clock-output-names = "lcpll1", "clk_wanpn", + clock-output-names = "lcpll1", "clk_wan", "clk_usb_ref", - "timesync_evt_clk"; + "clk_crmu_ts"; }; hsls_clk: hsls_clk { diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-pcie.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-pcie.dtsi new file mode 100644 index 000000000000..33a472ab17e8 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-pcie.dtsi @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause) +/* + *Copyright(c) 2018 Broadcom + */ + +pcie8: pcie@60400000 { + compatible = "brcm,iproc-pcie-paxc-v2"; + reg = <0 0x60400000 0 0x1000>; + linux,pci-domain = <8>; + + bus-range = <0x0 0x1>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x83000000 0 0x10000000 0 0x10000000 0 0x20000000>; + + dma-coherent; + + msi-map = <0x100 &gic_its 0x2000 0x1>, /* PF0 */ + <0x108 &gic_its 0x2040 0x8>, /* PF0-VF0-7 */ + <0x101 &gic_its 0x2080 0x1>, /* PF1 */ + <0x110 &gic_its 0x20c8 0x8>, /* PF1-VF8-15 */ + <0x102 &gic_its 0x2100 0x1>, /* PF2 */ + <0x118 &gic_its 0x2150 0x8>, /* PF2-VF16-23 */ + <0x103 &gic_its 0x2180 0x1>, /* PF3 */ + <0x120 &gic_its 0x21d8 0x8>, /* PF3-VF24-31 */ + <0x104 &gic_its 0x2200 0x1>, /* PF4 */ + <0x128 &gic_its 0x2260 0x8>, /* PF4-VF32-39 */ + <0x105 &gic_its 0x2280 0x1>, /* PF5 */ + <0x130 &gic_its 0x22e8 0x8>, /* PF5-VF40-47 */ + <0x106 &gic_its 0x2300 0x1>, /* PF6 */ + <0x138 &gic_its 0x2370 0x8>, /* PF6-VF48-55 */ + <0x107 &gic_its 0x2380 0x1>, /* PF7 */ + <0x140 &gic_its 0x23f8 0x8>; /* PF7-VF56-63 */ + + phys = <&pcie_phy 8>; + phy-names = "pcie-phy"; +}; + +pcie-ss { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x40000000 0x800>; + + pcie_phy: phy@0 { + compatible = "brcm,sr-pcie-phy"; + reg = <0x0 0x200>; + brcm,sr-cdru = <&cdru>; + brcm,sr-mhb = <&mhb>; + #phy-cells = <1>; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi index 99aaff0b6d72..a79ea126723e 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi @@ -146,6 +146,11 @@ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; }; + mhb: syscon@60401000 { + compatible = "brcm,sr-mhb", "syscon"; + reg = <0 0x60401000 0 0x38c>; + }; + scr { compatible = "simple-bus"; #address-cells = <1>; @@ -258,6 +263,18 @@ #include "stingray-clock.dtsi" + otp: otp@1c400 { + compatible = "brcm,ocotp-v2"; + reg = <0x0001c400 0x68>; + brcm,ocotp-size = <2048>; + status = "okay"; + }; + + cdru: syscon@1d000 { + compatible = "brcm,sr-cdru", "syscon"; + reg = <0x0001d000 0x400>; + }; + gpio_crmu: gpio@24800 { compatible = "brcm,iproc-gpio"; reg = <0x00024800 0x4c>; @@ -269,6 +286,7 @@ #include "stingray-fs4.dtsi" #include "stingray-sata.dtsi" + #include "stingray-pcie.dtsi" hsls { compatible = "simple-bus"; @@ -409,7 +427,7 @@ reg = <0x000b0000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <GIC_SPI 177 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <100000>; status = "disabled"; }; @@ -420,6 +438,7 @@ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; clocks = <&hsls_25m_div2_clk>, <&hsls_div4_clk>; clock-names = "wdogclk", "apb_pclk"; + timeout-sec = <60>; }; gpio_hsls: gpio@d0000 { @@ -453,7 +472,7 @@ reg = <0x000e0000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <GIC_SPI 178 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <100000>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi deleted file mode 100644 index f0803575fd9f..000000000000 --- a/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi +++ /dev/null @@ -1,20 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device tree sources for Exynos5433 TMU sensor configuration - * - * Copyright (c) 2016 Jonghwa Lee <jonghwa3.lee@samsung.com> - */ - -#include <dt-bindings/thermal/thermal_exynos.h> - -#thermal-sensor-cells = <0>; -samsung,tmu_gain = <8>; -samsung,tmu_reference_voltage = <23>; -samsung,tmu_noise_cancel_mode = <4>; -samsung,tmu_efuse_value = <75>; -samsung,tmu_min_efuse_value = <40>; -samsung,tmu_max_efuse_value = <150>; -samsung,tmu_first_point_trim = <25>; -samsung,tmu_second_point_trim = <85>; -samsung,tmu_default_temp_offset = <50>; -samsung,tmu_mux_addr = <6>; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi deleted file mode 100644 index cccae662228a..000000000000 --- a/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi +++ /dev/null @@ -1,19 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device tree sources for Exynos5433 TMU sensor configuration - * - * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com> - */ - -#include <dt-bindings/thermal/thermal_exynos.h> - -#thermal-sensor-cells = <0>; -samsung,tmu_gain = <8>; -samsung,tmu_reference_voltage = <16>; -samsung,tmu_noise_cancel_mode = <4>; -samsung,tmu_efuse_value = <75>; -samsung,tmu_min_efuse_value = <40>; -samsung,tmu_max_efuse_value = <150>; -samsung,tmu_first_point_trim = <25>; -samsung,tmu_second_point_trim = <85>; -samsung,tmu_default_temp_offset = <50>; diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 038c99792ccb..2131f12364cb 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -630,7 +630,7 @@ clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>, <&cmu_peris CLK_SCLK_TMU0>; clock-names = "tmu_apbif", "tmu_sclk"; - #include "exynos5433-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; status = "disabled"; }; @@ -641,7 +641,7 @@ clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>, <&cmu_peris CLK_SCLK_TMU0>; clock-names = "tmu_apbif", "tmu_sclk"; - #include "exynos5433-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; status = "disabled"; }; @@ -652,7 +652,7 @@ clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>, <&cmu_peris CLK_SCLK_TMU1>; clock-names = "tmu_apbif", "tmu_sclk"; - #include "exynos5433-tmu-g3d-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; status = "disabled"; }; @@ -663,7 +663,7 @@ clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>, <&cmu_peris CLK_SCLK_TMU1>; clock-names = "tmu_apbif", "tmu_sclk"; - #include "exynos5433-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; status = "disabled"; }; @@ -674,7 +674,7 @@ clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>, <&cmu_peris CLK_SCLK_TMU1>; clock-names = "tmu_apbif", "tmu_sclk"; - #include "exynos5433-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; status = "disabled"; }; @@ -1171,7 +1171,7 @@ power-domains = <&pd_gscl>; }; - sysmmu_scaler_0: sysmmu@0x15040000 { + sysmmu_scaler_0: sysmmu@15040000 { compatible = "samsung,exynos-sysmmu"; reg = <0x15040000 0x1000>; interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>; @@ -1182,7 +1182,7 @@ power-domains = <&pd_mscl>; }; - sysmmu_scaler_1: sysmmu@0x15050000 { + sysmmu_scaler_1: sysmmu@15050000 { compatible = "samsung,exynos-sysmmu"; reg = <0x15050000 0x1000>; interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi deleted file mode 100644 index 48494710b7b2..000000000000 --- a/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi +++ /dev/null @@ -1,21 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device tree sources for Exynos7 TMU sensor configuration - * - * Copyright (c) 2016 Samsung Electronics Co., Ltd. - * http://www.samsung.com - */ - -#include <dt-bindings/thermal/thermal_exynos.h> - -#thermal-sensor-cells = <0>; -samsung,tmu_gain = <9>; -samsung,tmu_reference_voltage = <17>; -samsung,tmu_noise_cancel_mode = <4>; -samsung,tmu_efuse_value = <75>; -samsung,tmu_min_efuse_value = <15>; -samsung,tmu_max_efuse_value = <100>; -samsung,tmu_first_point_trim = <25>; -samsung,tmu_second_point_trim = <85>; -samsung,tmu_default_temp_offset = <50>; -samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 93a84338938a..75ad724c487e 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -589,7 +589,7 @@ clocks = <&clock_peris PCLK_TMU>, <&clock_peris SCLK_TMU>; clock-names = "tmu_apbif", "tmu_sclk"; - #include "exynos7-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; thermal-zones { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts index 7286b1ebfd7a..f90c040fd5e8 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts @@ -1,45 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS1012A Freedom Board. * * Copyright 2016 Freescale Semiconductor, Inc. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts index cdc4aee75227..2fb1cb1f7d8f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts @@ -1,45 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS1012A QDS Board. * * Copyright 2016 Freescale Semiconductor, Inc. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts index c1a119effa61..5edb1e137a52 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts @@ -1,45 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS1012A RDB Board. * * Copyright 2016 Freescale Semiconductor, Inc. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index 205f0f4c5df0..4c558a2133e2 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -1,45 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-1012A family SoC. * * Copyright 2016 Freescale Semiconductor, Inc. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi index 169e171407a6..6082ae022136 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 device tree nodes for ls1043 * * Copyright 2015-2016 Freescale Semiconductor Inc. - * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ &soc { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts index 6341281485cf..c7b8d2c009cd 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-1043A family SoC. * * Copyright 2014-2015 Freescale Semiconductor, Inc. * * Mingkai Hu <Mingkai.hu@freescale.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts index 3dc0c8e9663d..7b01ba8d3b7e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-1043A family SoC. * * Copyright 2014-2015 Freescale Semiconductor, Inc. * * Mingkai Hu <Mingkai.hu@freescale.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 1109f22bda5e..b9f5d2ff4ff2 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-1043A family SoC. * * Copyright 2014-2015 Freescale Semiconductor, Inc. * * Mingkai Hu <Mingkai.hu@freescale.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/thermal/thermal.h> @@ -80,8 +43,8 @@ reg = <0x0>; clocks = <&clockgen 1 0>; next-level-cache = <&l2>; - #cooling-cells = <2>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -91,6 +54,7 @@ clocks = <&clockgen 1 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -100,6 +64,7 @@ clocks = <&clockgen 1 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -109,6 +74,7 @@ clocks = <&clockgen 1 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; l2: l2-cache { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi index f5017dba0f17..d6caaea57d90 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 device tree nodes for ls1046 * * Copyright 2015-2016 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ &soc { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts index 434383bade0e..e69306e6b0b1 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-1046A family SoC. * * Copyright 2016 Freescale Semiconductor, Inc. * * Shaohui Xie <Shaohui.Xie@nxp.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts index 5dc2782e2a58..440e111651d5 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-1046A family SoC. * * Copyright 2016 Freescale Semiconductor, Inc. * * Mingkai Hu <mingkai.hu@nxp.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 136ebfa9b333..65ce1c3cb568 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-1046A family SoC. * * Copyright 2016 Freescale Semiconductor, Inc. * * Mingkai Hu <mingkai.hu@nxp.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -87,6 +50,7 @@ clocks = <&clockgen 1 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -96,6 +60,7 @@ clocks = <&clockgen 1 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -105,6 +70,7 @@ clocks = <&clockgen 1 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; l2: l2-cache { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts index 30128051d0c0..6f48d21b97c0 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for NXP LS1088A QDS Board. * @@ -5,43 +6,6 @@ * * Harninder Rai <harninder.rai@nxp.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts index 4f17601b919c..8e925df6c01c 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for NXP LS1088A RDB Board. * @@ -5,43 +6,6 @@ * * Harninder Rai <harninder.rai@nxp.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 1c6556bcfddf..a07f612ab56b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for NXP Layerscape-1088A family SoC. * @@ -5,43 +6,6 @@ * * Harninder Rai <harninder.rai@nxp.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> @@ -76,6 +40,7 @@ reg = <0x1>; clocks = <&clockgen 1 0>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -84,6 +49,7 @@ reg = <0x2>; clocks = <&clockgen 1 0>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -92,6 +58,7 @@ reg = <0x3>; clocks = <&clockgen 1 0>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; cpu4: cpu@100 { @@ -109,6 +76,7 @@ reg = <0x101>; clocks = <&clockgen 1 1>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; cpu6: cpu@102 { @@ -117,6 +85,7 @@ reg = <0x102>; clocks = <&clockgen 1 1>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; cpu7: cpu@103 { @@ -125,6 +94,7 @@ reg = <0x103>; clocks = <&clockgen 1 1>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; CPU_PH20: cpu-ph20 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts index 3c99608b9b45..f6c3ee78ace0 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS2080a QDS Board. * @@ -7,43 +8,6 @@ * Abhimanyu Saini <abhimanyu.saini@nxp.com> * Bhupesh Sharma <bhupesh.sharma@freescale.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts index a4e7de9f70d8..44894356059c 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS2080a RDB Board. * @@ -7,43 +8,6 @@ * Abhimanyu Saini <abhimanyu.saini@nxp.com> * Bhupesh Sharma <bhupesh.sharma@freescale.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts index fbbb73e571c0..5517305039a4 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS2080a software Simulator model * @@ -5,43 +6,6 @@ * * Bhupesh Sharma <bhupesh.sharma@freescale.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi index 8d739301e7b8..f9c1d30cf4a7 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-2080A family SoC. * @@ -6,43 +7,6 @@ * Abhimanyu Saini <abhimanyu.saini@nxp.com> * Bhupesh Sharma <bhupesh.sharma@freescale.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "fsl-ls208xa.dtsi" @@ -65,6 +29,7 @@ clocks = <&clockgen 1 0>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster0_l2>; + #cooling-cells = <2>; }; cpu2: cpu@100 { @@ -84,6 +49,7 @@ clocks = <&clockgen 1 1>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster1_l2>; + #cooling-cells = <2>; }; cpu4: cpu@200 { @@ -103,6 +69,7 @@ clocks = <&clockgen 1 2>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster2_l2>; + #cooling-cells = <2>; }; cpu6: cpu@300 { @@ -122,6 +89,7 @@ clocks = <&clockgen 1 3>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster3_l2>; + #cooling-cells = <2>; }; cluster0_l2: l2-cache0 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts index eaee5b1c3a44..7c17b1bd4529 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS2088A QDS Board. * @@ -6,43 +7,6 @@ * * Abhimanyu Saini <abhimanyu.saini@nxp.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts index c411442cac62..f6b4d75a258b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS2088A RDB Board. * @@ -6,43 +7,6 @@ * * Abhimanyu Saini <abhimanyu.saini@nxp.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi index 0884e1a77901..7c882da3f6b0 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-2088A family SoC. * @@ -6,43 +7,6 @@ * * Abhimanyu Saini <abhimanyu.saini@nxp.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "fsl-ls208xa.dtsi" @@ -65,6 +29,7 @@ clocks = <&clockgen 1 0>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster0_l2>; + #cooling-cells = <2>; }; cpu2: cpu@100 { @@ -84,6 +49,7 @@ clocks = <&clockgen 1 1>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster1_l2>; + #cooling-cells = <2>; }; cpu4: cpu@200 { @@ -103,6 +69,7 @@ clocks = <&clockgen 1 2>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster2_l2>; + #cooling-cells = <2>; }; cpu6: cpu@300 { @@ -122,6 +89,7 @@ clocks = <&clockgen 1 3>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster3_l2>; + #cooling-cells = <2>; }; cluster0_l2: l2-cache0 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi index 1de618801c73..c11f52e7ae9a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS2080A QDS Board. * @@ -6,43 +7,6 @@ * * Abhimanyu Saini <abhimanyu.saini@nxp.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ &esdhc { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi index 061647bd97b8..6fd7f63085c9 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS2080A RDB Board. * @@ -6,43 +7,6 @@ * * Abhimanyu Saini <abhimanyu.saini@nxp.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ &esdhc { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index 137ef4dfc3e9..8cb78dd99672 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-2080A family SoC. * @@ -6,43 +7,6 @@ * * Abhimanyu Saini <abhimanyu.saini@nxp.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/thermal/thermal.h> diff --git a/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi index ae15307f6e8b..ff1aba5fae7f 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ BMan Portals device tree * * Copyright 2011-2016 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ &bportals { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi index ecdffe731b98..dbd2fc3ba790 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 10g port #0 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman@1a00000 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi index a7f6af56b6a5..6fc5d2560057 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 10g port #1 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman@1a00000 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi index d600786719fb..4e02276fcf99 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 1g port #0 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman@1a00000 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi index 3c0b76d43043..0312fa43fa77 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 1g port #1 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman@1a00000 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi index 89633afca26a..af2df07971dd 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 1g port #2 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman@1a00000 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi index 87c2b705b1f9..4ac98dc8b227 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 1g port #3 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman@1a00000 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi index 8f4d74b96b67..bd932d8b0160 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 1g port #4 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman@1a00000 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi index d534f770f729..7de1c5203f3e 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 1g port #5 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman@1a00000 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi index 4dd06767f839..ad6f46d8536b 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman0: fman@1a00000 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi index 6a93a4a9be0e..e3bec08b110d 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ QMan Portals device tree * * Copyright 2011-2016 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ &qportals { diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts index c6999624ed8a..c98bcbc8dfba 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts @@ -574,19 +574,35 @@ }; &dwmmc1 { + bus-width = <0x4>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + disable-wp; + cd-inverted; + cd-gpios = <&gpio25 3 0>; + pinctrl-names = "default"; + pinctrl-0 = <&sd_pmx_func + &sd_clk_cfg_func + &sd_cfg_func>; vmmc-supply = <&ldo16>; vqmmc-supply = <&ldo9>; status = "okay"; }; &dwmmc2 { /* WIFI */ + bus-width = <0x4>; + non-removable; broken-cd; + cap-power-off-card; + pinctrl-names = "default"; + pinctrl-0 = <&sdio_pmx_func + &sdio_clk_cfg_func + &sdio_cfg_func>; /* WL_EN */ vmmc-supply = <&wlan_en>; - ti,non-removable; - non-removable; - #address-cells = <0x1>; - #size-cells = <0x0>; status = "ok"; wlcore: wlcore@2 { diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index 8d477dcbfa58..fa79a5d8fb5b 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -61,7 +61,7 @@ reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&A53_L2>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <592>; clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; operating-points-v2 = <&cluster0_opp>; @@ -75,7 +75,7 @@ reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&A53_L2>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <592>; clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; operating-points-v2 = <&cluster0_opp>; @@ -87,7 +87,7 @@ reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&A53_L2>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <592>; clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; operating-points-v2 = <&cluster0_opp>; @@ -99,7 +99,7 @@ reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&A53_L2>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <592>; clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; operating-points-v2 = <&cluster0_opp>; @@ -111,7 +111,7 @@ reg = <0x0 0x100>; enable-method = "psci"; next-level-cache = <&A73_L2>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>; + cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>; capacity-dmips-mhz = <1024>; clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; operating-points-v2 = <&cluster1_opp>; @@ -125,7 +125,7 @@ reg = <0x0 0x101>; enable-method = "psci"; next-level-cache = <&A73_L2>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>; + cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>; capacity-dmips-mhz = <1024>; clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; operating-points-v2 = <&cluster1_opp>; @@ -137,7 +137,7 @@ reg = <0x0 0x102>; enable-method = "psci"; next-level-cache = <&A73_L2>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>; + cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>; capacity-dmips-mhz = <1024>; clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; operating-points-v2 = <&cluster1_opp>; @@ -149,7 +149,7 @@ reg = <0x0 0x103>; enable-method = "psci"; next-level-cache = <&A73_L2>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>; + cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>; capacity-dmips-mhz = <1024>; clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; operating-points-v2 = <&cluster1_opp>; @@ -158,31 +158,40 @@ idle-states { entry-method = "psci"; - CPU_SLEEP: cpu-sleep { + CPU_SLEEP_0: cpu-sleep-0 { compatible = "arm,idle-state"; local-timer-stop; arm,psci-suspend-param = <0x0010000>; - entry-latency-us = <40>; - exit-latency-us = <70>; - min-residency-us = <3000>; + entry-latency-us = <400>; + exit-latency-us = <650>; + min-residency-us = <1500>; }; - CLUSTER_SLEEP_0: cluster-sleep-0 { compatible = "arm,idle-state"; local-timer-stop; arm,psci-suspend-param = <0x1010000>; entry-latency-us = <500>; - exit-latency-us = <5000>; - min-residency-us = <20000>; + exit-latency-us = <1600>; + min-residency-us = <3500>; + }; + + + CPU_SLEEP_1: cpu-sleep-1 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <400>; + exit-latency-us = <550>; + min-residency-us = <1500>; }; CLUSTER_SLEEP_1: cluster-sleep-1 { compatible = "arm,idle-state"; local-timer-stop; arm,psci-suspend-param = <0x1010000>; - entry-latency-us = <1000>; - exit-latency-us = <5000>; - min-residency-us = <20000>; + entry-latency-us = <800>; + exit-latency-us = <2900>; + min-residency-us = <3500>; }; }; @@ -1002,16 +1011,10 @@ /* SD */ dwmmc1: dwmmc1@ff37f000 { - #address-cells = <1>; - #size-cells = <0>; - cd-inverted; compatible = "hisilicon,hi3660-dw-mshc"; - bus-width = <0x4>; - disable-wp; - cap-sd-highspeed; - supports-highspeed; - card-detect-delay = <200>; reg = <0x0 0xff37f000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; clocks = <&crg_ctrl HI3660_CLK_GATE_SD>, <&crg_ctrl HI3660_HCLK_GATE_SD>; @@ -1019,29 +1022,17 @@ clock-frequency = <3200000>; resets = <&crg_rst 0x94 18>; reset-names = "reset"; - cd-gpios = <&gpio25 3 0>; hisilicon,peripheral-syscon = <&sctrl>; - pinctrl-names = "default"; - pinctrl-0 = <&sd_pmx_func - &sd_clk_cfg_func - &sd_cfg_func>; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; + card-detect-delay = <200>; status = "disabled"; - - slot@0 { - reg = <0x0>; - bus-width = <4>; - disable-wp; - }; }; /* SDIO */ dwmmc2: dwmmc2@ff3ff000 { compatible = "hisilicon,hi3660-dw-mshc"; reg = <0x0 0xff3ff000 0x0 0x1000>; + #address-cells = <0x1>; + #size-cells = <0x0>; interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&crg_ctrl HI3660_CLK_GATE_SDIO0>, <&crg_ctrl HI3660_HCLK_GATE_SDIO0>; @@ -1049,12 +1040,6 @@ resets = <&crg_rst 0x94 20>; reset-names = "reset"; card-detect-delay = <200>; - supports-highspeed; - keep-power-in-suspend; - pinctrl-names = "default"; - pinctrl-0 = <&sdio_pmx_func - &sdio_clk_cfg_func - &sdio_cfg_func>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index edb4ee0b8896..f4964bee6a1a 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -322,6 +322,7 @@ dwmmc_2: dwmmc2@f723f000 { bus-width = <0x4>; non-removable; + cap-power-off-card; vmmc-supply = <®_vdd_3v3>; mmc-pwrseq = <&wl1835_pwrseq>; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index 586b281cd531..247024df714f 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -88,8 +88,8 @@ next-level-cache = <&CLUSTER0_L2>; clocks = <&stub_clock 0>; operating-points-v2 = <&cpu_opp_table>; - #cooling-cells = <2>; /* min followed by max */ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <311>; }; @@ -101,6 +101,8 @@ next-level-cache = <&CLUSTER0_L2>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <311>; }; cpu2: cpu@2 { @@ -111,6 +113,8 @@ next-level-cache = <&CLUSTER0_L2>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <311>; }; cpu3: cpu@3 { @@ -121,6 +125,8 @@ next-level-cache = <&CLUSTER0_L2>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <311>; }; cpu4: cpu@100 { @@ -131,6 +137,8 @@ next-level-cache = <&CLUSTER1_L2>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <311>; }; cpu5: cpu@101 { @@ -141,6 +149,8 @@ next-level-cache = <&CLUSTER1_L2>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <311>; }; cpu6: cpu@102 { @@ -151,6 +161,8 @@ next-level-cache = <&CLUSTER1_L2>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <311>; }; cpu7: cpu@103 { @@ -161,6 +173,8 @@ next-level-cache = <&CLUSTER1_L2>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <311>; }; CLUSTER0_L2: l2-cache0 { diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 3353252d78a0..fc5623ac14b1 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -22,6 +22,21 @@ serial1 = &uart1; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * The PSCI firmware region depicted below is the default one + * and should be updated by the bootloader. + */ + psci-area@4000000 { + reg = <0 0x4000000 0 0x200000>; + no-map; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -98,6 +113,12 @@ status = "disabled"; }; + avs: avs@11500 { + compatible = "marvell,armada-3700-avs", + "syscon"; + reg = <0x11500 0x40>; + }; + uart0: serial@12000 { compatible = "marvell,armada-3700-uart"; reg = <0x12000 0x200>; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts index a66958ff4de6..56fa44860909 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts @@ -91,7 +91,7 @@ }; sfp_eth3: sfp-eth3 { - /* CON3,4 - CPS lane 5 */ + /* CON13,14 - CPS lane 5 */ compatible = "sff,sfp"; i2c-bus = <&sfp_1g_i2c>; los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi index 7dabe25f6774..1c6ff8197a88 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi @@ -149,7 +149,7 @@ CP110_LABEL(icu): interrupt-controller@1e0000 { compatible = "marvell,cp110-icu"; - reg = <0x1e0000 0x10>; + reg = <0x1e0000 0x440>; #interrupt-cells = <3>; interrupt-controller; msi-parent = <&gicp>; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi index ecb034177fc2..57d3f00464ce 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi @@ -27,15 +27,33 @@ }; cbb { + ethernet@2490000 { + status = "okay"; + + phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 5) GPIO_ACTIVE_LOW>; + phy-handle = <&phy>; + phy-mode = "rgmii"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA194_MAIN_GPIO(G, 4) IRQ_TYPE_LEVEL_LOW>; + }; + }; + }; + serial@3110000 { status = "okay"; }; /* SDMMC1 (SD/MMC) */ sdhci@3400000 { -/* cd-gpios = <&gpio TEGRA194_MAIN_GPIO(A, 0) GPIO_ACTIVE_LOW>; -*/ }; /* SDMMC4 (eMMC) */ diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index 6322ef265c2f..a4dfcd19b9e8 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -18,6 +18,45 @@ #size-cells = <1>; ranges = <0x0 0x0 0x0 0x40000000>; + gpio: gpio@2200000 { + compatible = "nvidia,tegra194-gpio"; + reg-names = "security", "gpio"; + reg = <0x2200000 0x10000>, + <0x2210000 0x10000>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + interrupt-controller; + #gpio-cells = <2>; + gpio-controller; + }; + + ethernet@2490000 { + compatible = "nvidia,tegra186-eqos", + "snps,dwc-qos-ethernet-4.10"; + reg = <0x02490000 0x10000>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_AXI_CBB>, + <&bpmp TEGRA194_CLK_EQOS_AXI>, + <&bpmp TEGRA194_CLK_EQOS_RX>, + <&bpmp TEGRA194_CLK_EQOS_TX>, + <&bpmp TEGRA194_CLK_EQOS_PTP_REF>; + clock-names = "master_bus", "slave_bus", "rx", "tx", "ptp_ref"; + resets = <&bpmp TEGRA194_RESET_EQOS>; + reset-names = "eqos"; + status = "disabled"; + + snps,write-requests = <1>; + snps,read-requests = <3>; + snps,burst-map = <0x7>; + snps,txpbl = <16>; + snps,rxpbl = <8>; + }; + uarta: serial@3100000 { compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; reg = <0x03100000 0x40>; @@ -329,6 +368,73 @@ }; }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "nvidia,tegra194-carmel", "arm,armv8"; + device_type = "cpu"; + reg = <0x10000>; + enable-method = "psci"; + }; + + cpu@1 { + compatible = "nvidia,tegra194-carmel", "arm,armv8"; + device_type = "cpu"; + reg = <0x10001>; + enable-method = "psci"; + }; + + cpu@2 { + compatible = "nvidia,tegra194-carmel", "arm,armv8"; + device_type = "cpu"; + reg = <0x100>; + enable-method = "psci"; + }; + + cpu@3 { + compatible = "nvidia,tegra194-carmel", "arm,armv8"; + device_type = "cpu"; + reg = <0x101>; + enable-method = "psci"; + }; + + cpu@4 { + compatible = "nvidia,tegra194-carmel", "arm,armv8"; + device_type = "cpu"; + reg = <0x200>; + enable-method = "psci"; + }; + + cpu@5 { + compatible = "nvidia,tegra194-carmel", "arm,armv8"; + device_type = "cpu"; + reg = <0x201>; + enable-method = "psci"; + }; + + cpu@6 { + compatible = "nvidia,tegra194-carmel", "arm,armv8"; + device_type = "cpu"; + reg = <0x10300>; + enable-method = "psci"; + }; + + cpu@7 { + compatible = "nvidia,tegra194-carmel", "arm,armv8"; + device_type = "cpu"; + reg = <0x10301>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + status = "okay"; + method = "smc"; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 9ff848792712..78ce3979ef09 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -338,7 +338,7 @@ led@6 { label = "apq8016-sbc:blue:bt"; gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "bt"; + linux,default-trigger = "bluetooth-power"; default-state = "off"; }; }; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index 0f829db33efe..0ef90c6554a9 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -19,6 +19,33 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +/* + * GPIO name legend: proper name = the GPIO line is used as GPIO + * NC = not connected (pin out but not routed from the chip to + * anything the board) + * "[PER]" = pin is muxed for [peripheral] (not GPIO) + * LSEC = Low Speed External Connector + * P HSEC = Primary High Speed External Connector + * S HSEC = Secondary High Speed External Connector + * J14 = Camera Connector + * TP = Test Points + * + * Line names are taken from the schematic "DragonBoard 820c", + * drawing no: LM25-P2751-1 + * + * For the lines routed to the external connectors the + * lines are named after the 96Boards CE Specification 1.0, + * Appendix "Expansion Connector Signal Description". + * + * When the 96Board naming of a line and the schematic name of + * the same line are in conflict, the 96Board specification + * takes precedence, which means that the external UART on the + * LSEC is named UART0 while the schematic and SoC names this + * UART3. This is only for the informational lines i.e. "[FOO]", + * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only + * ones actually used for GPIO. + */ + / { aliases { serial0 = &blsp2_uart1; @@ -75,7 +102,7 @@ serial@75b1000 { label = "LS-UART0"; - status = "okay"; + status = "disabled"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp2_uart2_4pins_default>; pinctrl-1 = <&blsp2_uart2_4pins_sleep>; @@ -130,6 +157,218 @@ status = "okay"; }; + pinctrl@1010000 { + gpio-line-names = + "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */ + "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */ + "[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */ + "[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */ + "[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */ + "[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */ + "[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */ + "[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */ + "GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */ + "TP93", /* GPIO_9 */ + "GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */ + "[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */ + "NC", /* GPIO_12 */ + "[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */ + "[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */ + "[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */ + "TP99", /* GPIO_16 */ + "[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */ + "[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */ + "[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */ + "[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */ + "FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */ + "FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */ + "GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */ + "GPIO-D", /* GPIO_24, LSEC pin 26 */ + "GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */ + "GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */ + "BLSP6_I2C_SDA", /* GPIO_27 */ + "BLSP6_I2C_SCL", /* GPIO_28 */ + "GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */ + "GPIO30", /* GPIO_30, S HSEC pin 4 */ + "HDMI_CEC", /* GPIO_31 */ + "HDMI_DDC_CLOCK", /* GPIO_32 */ + "HDMI_DDC_DATA", /* GPIO_33 */ + "HDMI_HOT_PLUG_DETECT", /* GPIO_34 */ + "PCIE0_RST_N", /* GPIO_35 */ + "PCIE0_CLKREQ_N", /* GPIO_36 */ + "PCIE0_WAKE", /* GPIO_37 */ + "SD_CARD_DET_N", /* GPIO_38 */ + "TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */ + "W_DISABLE_N", /* GPIO_40 */ + "[BLSP9_UART_TX]", /* GPIO_41 */ + "[BLSP9_UART_RX]", /* GPIO_42 */ + "[BLSP2_UART_CTS_N]", /* GPIO_43 */ + "[BLSP2_UART_RFR_N]", /* GPIO_44 */ + "[BLSP3_UART_TX]", /* GPIO_45 */ + "[BLSP3_UART_RX]", /* GPIO_46 */ + "[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */ + "[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */ + "[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */ + "[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */ + "[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */ + "[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */ + "[CODEC_INT1_N]", /* GPIO_53 */ + "[CODEC_INT2_N]", /* GPIO_54 */ + "[BLSP7_I2C_SDA]", /* GPIO_55 */ + "[BLSP7_I2C_SCL]", /* GPIO_56 */ + "MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */ + "[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */ + "[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */ + "[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */ + "[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */ + "GPIO-E", /* GPIO_62, LSEC pin 27 */ + "TP87", /* GPIO_63 */ + "[CODEC_RST_N]", /* GPIO_64 */ + "[PCM1_CLK]", /* GPIO_65 */ + "[PCM1_SYNC]", /* GPIO_66 */ + "[PCM1_DIN]", /* GPIO_67 */ + "[PCM1_DOUT]", /* GPIO_68 */ + "AUDIO_REF_CLK", /* GPIO_69 */ + "SLIMBUS_CLK", /* GPIO_70 */ + "SLIMBUS_DATA0", /* GPIO_71 */ + "SLIMBUS_DATA1", /* GPIO_72 */ + "NC", /* GPIO_73 */ + "NC", /* GPIO_74 */ + "NC", /* GPIO_75 */ + "NC", /* GPIO_76 */ + "TP94", /* GPIO_77 */ + "NC", /* GPIO_78 */ + "TP95", /* GPIO_79 */ + "GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */ + "TP88", /* GPIO_81 */ + "TP89", /* GPIO_82 */ + "TP90", /* GPIO_83 */ + "TP91", /* GPIO_84 */ + "[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */ + "[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */ + "[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */ + "[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */ + "TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */ + "TSIF1_EN", /* GPIO_90, S HSEC pin 46 */ + "TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */ + "NC", /* GPIO_92 */ + "TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */ + "TSIF2_EN", /* GPIO_94, S HSEC pin 56 */ + "TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */ + "TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */ + "NC", /* GPIO_97 */ + "CAM1_STANDBY_N", /* GPIO_98 */ + "NC", /* GPIO_99 */ + "NC", /* GPIO_100 */ + "[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */ + "BOOT_CONFIG1", /* GPIO_102 */ + "USB_HUB_RESET", /* GPIO_103 */ + "CAM1_RST_N", /* GPIO_104 */ + "NC", /* GPIO_105 */ + "NC", /* GPIO_106 */ + "NC", /* GPIO_107 */ + "NC", /* GPIO_108 */ + "NC", /* GPIO_109 */ + "NC", /* GPIO_110 */ + "NC", /* GPIO_111 */ + "NC", /* GPIO_112 */ + "PMI8994_BUA", /* GPIO_113 */ + "PCIE2_RST_N", /* GPIO_114 */ + "PCIE2_CLKREQ_N", /* GPIO_115 */ + "PCIE2_WAKE", /* GPIO_116 */ + "SSC_IRQ_0", /* GPIO_117 */ + "SSC_IRQ_1", /* GPIO_118 */ + "SSC_IRQ_2", /* GPIO_119 */ + "NC", /* GPIO_120 */ + "GPIO121", /* GPIO_121, S HSEC pin 2 */ + "NC", /* GPIO_122 */ + "SSC_IRQ_6", /* GPIO_123 */ + "SSC_IRQ_7", /* GPIO_124 */ + "GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */ + "BOOT_CONFIG5", /* GPIO_126 */ + "NC", /* GPIO_127 */ + "NC", /* GPIO_128 */ + "BOOT_CONFIG7", /* GPIO_129 */ + "PCIE1_RST_N", /* GPIO_130 */ + "PCIE1_CLKREQ_N", /* GPIO_131 */ + "PCIE1_WAKE", /* GPIO_132 */ + "GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */ + "NC", /* GPIO_134 */ + "NC", /* GPIO_135 */ + "BOOT_CONFIG8", /* GPIO_136 */ + "NC", /* GPIO_137 */ + "NC", /* GPIO_138 */ + "GPS_SSBI2", /* GPIO_139 */ + "GPS_SSBI1", /* GPIO_140 */ + "NC", /* GPIO_141 */ + "NC", /* GPIO_142 */ + "NC", /* GPIO_143 */ + "BOOT_CONFIG6", /* GPIO_144 */ + "NC", /* GPIO_145 */ + "NC", /* GPIO_146 */ + "NC", /* GPIO_147 */ + "NC", /* GPIO_148 */ + "NC"; /* GPIO_149 */ + }; + + qcom,spmi@400f000 { + pmic@0 { + gpios@c000 { + gpio-line-names = + "NC", + "KEY_VOLP_N", + "NC", + "BL1_PWM", + "GPIO-F", /* BL0_PWM, LSEC pin 28 */ + "BL1_EN", + "NC", + "WLAN_EN", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "DIVCLK1", + "DIVCLK2", + "DIVCLK3", + "DIVCLK4", + "BT_EN", + "PMIC_SLB", + "PMIC_BUA", + "USB_VBUS_DET"; + }; + + mpps@a000 { + gpio-line-names = + "VDDPX_BIAS", + "WIFI_LED", + "NC", + "BT_LED", + "PM_MPP05", + "PM_MPP06", + "PM_MPP07", + "NC"; + }; + }; + + pmic@2 { + gpios@c000 { + gpio-line-names = + "NC", + "SPKR_AMP_EN1", + "SPKR_AMP_EN2", + "TP61", + "NC", + "USB2_VBUS_DET", + "NC", + "NC", + "NC", + "NC"; + }; + }; + }; + phy@34000 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 650f356f69ca..7b32b8990d62 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -858,9 +858,9 @@ clocks = <&gcc GCC_MDSS_AHB_CLK>, <&gcc GCC_MDSS_AXI_CLK>, <&gcc GCC_MDSS_VSYNC_CLK>; - clock-names = "iface_clk", - "bus_clk", - "vsync_clk"; + clock-names = "iface", + "bus", + "vsync"; interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>; @@ -883,10 +883,10 @@ <&gcc GCC_MDSS_AXI_CLK>, <&gcc GCC_MDSS_MDP_CLK>, <&gcc GCC_MDSS_VSYNC_CLK>; - clock-names = "iface_clk", - "bus_clk", - "core_clk", - "vsync_clk"; + clock-names = "iface", + "bus", + "core", + "vsync"; iommus = <&apps_iommu 4>; @@ -922,12 +922,12 @@ <&gcc GCC_MDSS_BYTE0_CLK>, <&gcc GCC_MDSS_PCLK0_CLK>, <&gcc GCC_MDSS_ESC0_CLK>; - clock-names = "mdp_core_clk", - "iface_clk", - "bus_clk", - "byte_clk", - "pixel_clk", - "core_clk"; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; phys = <&dsi_phy0>; phy-names = "dsi-phy"; @@ -963,7 +963,7 @@ #phy-cells = <0>; clocks = <&gcc GCC_MDSS_AHB_CLK>; - clock-names = "iface_clk"; + clock-names = "iface"; }; }; @@ -1191,14 +1191,14 @@ port@0 { reg = <0>; - etf_out: endpoint { + etf_in: endpoint { slave-mode; remote-endpoint = <&funnel0_out>; }; }; port@1 { reg = <0>; - etf_in: endpoint { + etf_out: endpoint { remote-endpoint = <&replicator_in>; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi new file mode 100644 index 000000000000..4d5aca3eeb69 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* Copyright 2018 Google LLC. */ + +#include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/interrupt-controller/irq.h> + +&spmi_bus { + pm8005_lsid0: pmic@4 { + compatible = "qcom,pm8005", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8005_gpio: gpios@c000 { + compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, + <0 0xc1 0 IRQ_TYPE_NONE>, + <0 0xc2 0 IRQ_TYPE_NONE>, + <0 0xc3 0 IRQ_TYPE_NONE>; + }; + + }; + + pm8005_lsid1: pmic@5 { + compatible = "qcom,pm8005", "qcom,spmi-pmic"; + reg = <0x5 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi new file mode 100644 index 000000000000..92bed1e7d4bb --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* Copyright 2018 Google LLC. */ + +#include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/interrupt-controller/irq.h> + +&spmi_bus { + pm8998_lsid0: pmic@0 { + compatible = "qcom,pm8998", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8998_gpio: gpios@c000 { + compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, + <0 0xc1 0 IRQ_TYPE_NONE>, + <0 0xc2 0 IRQ_TYPE_NONE>, + <0 0xc3 0 IRQ_TYPE_NONE>, + <0 0xc4 0 IRQ_TYPE_NONE>, + <0 0xc5 0 IRQ_TYPE_NONE>, + <0 0xc6 0 IRQ_TYPE_NONE>, + <0 0xc7 0 IRQ_TYPE_NONE>, + <0 0xc8 0 IRQ_TYPE_NONE>, + <0 0xc9 0 IRQ_TYPE_NONE>, + <0 0xca 0 IRQ_TYPE_NONE>, + <0 0xcb 0 IRQ_TYPE_NONE>, + <0 0xcc 0 IRQ_TYPE_NONE>, + <0 0xcd 0 IRQ_TYPE_NONE>, + <0 0xce 0 IRQ_TYPE_NONE>, + <0 0xcf 0 IRQ_TYPE_NONE>, + <0 0xd0 0 IRQ_TYPE_NONE>, + <0 0xd1 0 IRQ_TYPE_NONE>, + <0 0xd2 0 IRQ_TYPE_NONE>, + <0 0xd3 0 IRQ_TYPE_NONE>, + <0 0xd4 0 IRQ_TYPE_NONE>, + <0 0xd5 0 IRQ_TYPE_NONE>, + <0 0xd6 0 IRQ_TYPE_NONE>, + <0 0xd7 0 IRQ_TYPE_NONE>, + <0 0xd8 0 IRQ_TYPE_NONE>, + <0 0xd9 0 IRQ_TYPE_NONE>; + }; + + }; + + pm8998_lsid1: pmic@1 { + compatible = "qcom,pm8998", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index 979ab49913f1..6d651f314193 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -12,4 +12,49 @@ / { model = "Qualcomm Technologies, Inc. SDM845 MTP"; compatible = "qcom,sdm845-mtp"; + + aliases { + serial0 = &uart9; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&i2c10 { + status = "okay"; + clock-frequency = <400000>; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&uart9 { + status = "okay"; +}; + +/* PINCTRL - additions to nodes defined in sdm845.dtsi */ + +&qup_i2c10_default { + pinconf { + pins = "gpio55", "gpio56"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_uart9_default { + pinconf-tx { + pins = "gpio4"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-rx { + pins = "gpio5"; + drive-strength = <2>; + bias-pull-up; + }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index cdaabeb3c995..9c10ff5e5843 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -5,7 +5,10 @@ * Copyright (c) 2018, The Linux Foundation. All rights reserved. */ +#include <dt-bindings/clock/qcom,gcc-sdm845.h> +#include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> / { interrupt-parent = <&intc>; @@ -13,6 +16,41 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c12 = &i2c12; + i2c13 = &i2c13; + i2c14 = &i2c14; + i2c15 = &i2c15; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; + spi3 = &spi3; + spi4 = &spi4; + spi5 = &spi5; + spi6 = &spi6; + spi7 = &spi7; + spi8 = &spi8; + spi9 = &spi9; + spi10 = &spi10; + spi11 = &spi11; + spi12 = &spi12; + spi13 = &spi13; + spi14 = &spi14; + spi15 = &spi15; + }; + chosen { }; memory@80000000 { @@ -152,6 +190,11 @@ }; }; + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, @@ -206,6 +249,457 @@ #power-domain-cells = <1>; }; + qupv3_id_0: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x8c0000 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + i2c0: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0x880000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_default>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0x880000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_default>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0x884000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_default>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0x884000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi1_default>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0x888000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_default>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0x888000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi2_default>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0x88c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c3_default>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi3: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0x88c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi3_default>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0x890000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_default>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0x890000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi4_default>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0x894000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_default>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0x894000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi5_default>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@898000 { + compatible = "qcom,geni-i2c"; + reg = <0x898000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_default>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi6: spi@898000 { + compatible = "qcom,geni-spi"; + reg = <0x898000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi6_default>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c7: i2c@89c000 { + compatible = "qcom,geni-i2c"; + reg = <0x89c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c7_default>; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi7: spi@89c000 { + compatible = "qcom,geni-spi"; + reg = <0x89c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi7_default>; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0xac0000 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0xa80000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_default>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0xa80000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi8_default>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0xa84000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c9_default>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0xa84000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi9_default>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart9: serial@a84000 { + compatible = "qcom,geni-debug-uart"; + reg = <0xa84000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart9_default>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0xa88000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_default>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0xa88000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi10_default>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0xa8c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c11_default>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0xa8c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi11_default>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0xa90000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c12_default>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0xa90000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi12_default>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0xa94000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c13_default>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi13: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0xa94000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi13_default>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c14: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0xa98000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c14_default>; + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi14: spi@a98000 { + compatible = "qcom,geni-spi"; + reg = <0xa98000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi14_default>; + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c15: i2c@a9c000 { + compatible = "qcom,geni-i2c"; + reg = <0xa9c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c15_default>; + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi15: spi@a9c000 { + compatible = "qcom,geni-spi"; + reg = <0xa9c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi15_default>; + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + tcsr_mutex_regs: syscon@1f40000 { compatible = "syscon"; reg = <0x1f40000 0x40000>; @@ -219,6 +713,253 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + + qup_i2c0_default: qup-i2c0-default { + pinmux { + pins = "gpio0", "gpio1"; + function = "qup0"; + }; + }; + + qup_i2c1_default: qup-i2c1-default { + pinmux { + pins = "gpio17", "gpio18"; + function = "qup1"; + }; + }; + + qup_i2c2_default: qup-i2c2-default { + pinmux { + pins = "gpio27", "gpio28"; + function = "qup2"; + }; + }; + + qup_i2c3_default: qup-i2c3-default { + pinmux { + pins = "gpio41", "gpio42"; + function = "qup3"; + }; + }; + + qup_i2c4_default: qup-i2c4-default { + pinmux { + pins = "gpio89", "gpio90"; + function = "qup4"; + }; + }; + + qup_i2c5_default: qup-i2c5-default { + pinmux { + pins = "gpio85", "gpio86"; + function = "qup5"; + }; + }; + + qup_i2c6_default: qup-i2c6-default { + pinmux { + pins = "gpio45", "gpio46"; + function = "qup6"; + }; + }; + + qup_i2c7_default: qup-i2c7-default { + pinmux { + pins = "gpio93", "gpio94"; + function = "qup7"; + }; + }; + + qup_i2c8_default: qup-i2c8-default { + pinmux { + pins = "gpio65", "gpio66"; + function = "qup8"; + }; + }; + + qup_i2c9_default: qup-i2c9-default { + pinmux { + pins = "gpio6", "gpio7"; + function = "qup9"; + }; + }; + + qup_i2c10_default: qup-i2c10-default { + pinmux { + pins = "gpio55", "gpio56"; + function = "qup10"; + }; + }; + + qup_i2c11_default: qup-i2c11-default { + pinmux { + pins = "gpio31", "gpio32"; + function = "qup11"; + }; + }; + + qup_i2c12_default: qup-i2c12-default { + pinmux { + pins = "gpio49", "gpio50"; + function = "qup12"; + }; + }; + + qup_i2c13_default: qup-i2c13-default { + pinmux { + pins = "gpio105", "gpio106"; + function = "qup13"; + }; + }; + + qup_i2c14_default: qup-i2c14-default { + pinmux { + pins = "gpio33", "gpio34"; + function = "qup14"; + }; + }; + + qup_i2c15_default: qup-i2c15-default { + pinmux { + pins = "gpio81", "gpio82"; + function = "qup15"; + }; + }; + + qup_spi0_default: qup-spi0-default { + pinmux { + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; + function = "qup0"; + }; + }; + + qup_spi1_default: qup-spi1-default { + pinmux { + pins = "gpio17", "gpio18", + "gpio19", "gpio20"; + function = "qup1"; + }; + }; + + qup_spi2_default: qup-spi2-default { + pinmux { + pins = "gpio27", "gpio28", + "gpio29", "gpio30"; + function = "qup2"; + }; + }; + + qup_spi3_default: qup-spi3-default { + pinmux { + pins = "gpio41", "gpio42", + "gpio43", "gpio44"; + function = "qup3"; + }; + }; + + qup_spi4_default: qup-spi4-default { + pinmux { + pins = "gpio89", "gpio90", + "gpio91", "gpio92"; + function = "qup4"; + }; + }; + + qup_spi5_default: qup-spi5-default { + pinmux { + pins = "gpio85", "gpio86", + "gpio87", "gpio88"; + function = "qup5"; + }; + }; + + qup_spi6_default: qup-spi6-default { + pinmux { + pins = "gpio45", "gpio46", + "gpio47", "gpio48"; + function = "qup6"; + }; + }; + + qup_spi7_default: qup-spi7-default { + pinmux { + pins = "gpio93", "gpio94", + "gpio95", "gpio96"; + function = "qup7"; + }; + }; + + qup_spi8_default: qup-spi8-default { + pinmux { + pins = "gpio65", "gpio66", + "gpio67", "gpio68"; + function = "qup8"; + }; + }; + + qup_spi9_default: qup-spi9-default { + pinmux { + pins = "gpio6", "gpio7", + "gpio4", "gpio5"; + function = "qup9"; + }; + }; + + qup_spi10_default: qup-spi10-default { + pinmux { + pins = "gpio55", "gpio56", + "gpio53", "gpio54"; + function = "qup10"; + }; + }; + + qup_spi11_default: qup-spi11-default { + pinmux { + pins = "gpio31", "gpio32", + "gpio33", "gpio34"; + function = "qup11"; + }; + }; + + qup_spi12_default: qup-spi12-default { + pinmux { + pins = "gpio49", "gpio50", + "gpio51", "gpio52"; + function = "qup12"; + }; + }; + + qup_spi13_default: qup-spi13-default { + pinmux { + pins = "gpio105", "gpio106", + "gpio107", "gpio108"; + function = "qup13"; + }; + }; + + qup_spi14_default: qup-spi14-default { + pinmux { + pins = "gpio33", "gpio34", + "gpio31", "gpio32"; + function = "qup14"; + }; + }; + + qup_spi15_default: qup-spi15-default { + pinmux { + pins = "gpio81", "gpio82", + "gpio83", "gpio84"; + function = "qup15"; + }; + }; + + qup_uart9_default: qup-uart9-default { + pinmux { + pins = "gpio4", "gpio5"; + function = "qup9"; + }; + }; }; spmi_bus: spmi@c440000 { @@ -246,6 +987,29 @@ #mbox-cells = <1>; }; + apps_rsc: rsc@179c0000 { + label = "apps_rsc"; + compatible = "qcom,rpmh-rsc"; + reg = <0x179c0000 0x10000>, + <0x179d0000 0x10000>, + <0x179e0000 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, + <SLEEP_TCS 3>, + <WAKE_TCS 3>, + <CONTROL_TCS 1>; + + rpmhcc: clock-controller { + compatible = "qcom,sdm845-rpmh-clk"; + #clock-cells = <1>; + }; + }; + intc: interrupt-controller@17a00000 { compatible = "arm,gic-v3"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts index 009cb1cb0dde..2f24dfc45617 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the H3ULCB Kingfisher board * * Copyright (C) 2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include "r8a7795-es1-h3ulcb.dts" diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts index dd4f9b6a4254..598b98168559 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board * * Copyright (C) 2016 Renesas Electronics Corp. * Copyright (C) 2016 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts index 3f46345a4644..6b5fa91f1d5d 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Salvator-X board with R-Car H3 ES1.x * * Copyright (C) 2015 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi index e19dcd6cb767..7b2fbaec9aef 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a7795 ES1.x SoC * * Copyright (C) 2015 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include "r8a7795.dtsi" @@ -80,7 +77,7 @@ vspd3: vsp@fea38000 { compatible = "renesas,vsp2"; - reg = <0 0xfea38000 0 0x8000>; + reg = <0 0xfea38000 0 0x5000>; interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 620>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts index 4403227c0f97..80791ed27539 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the H3ULCB Kingfisher board * * Copyright (C) 2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include "r8a7795-h3ulcb.dts" diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts index 0afe777973de..df50bf46406e 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board * * Copyright (C) 2016 Renesas Electronics Corp. * Copyright (C) 2016 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts index 0efbef5ea9b7..446822f5751c 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Salvator-X board with R-Car H3 ES2.0 * * Copyright (C) 2015 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts index e231b5a7cbab..8ded64d0a4d5 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Salvator-X 2nd version board with R-Car H3 ES2.0 * * Copyright (C) 2015-2017 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index d842940b2f43..fb9d08ad7659 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a7795 SoC * * Copyright (C) 2015 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a7795-cpg-mssr.h> @@ -291,7 +288,7 @@ #size-cells = <2>; ranges; - wdt0: watchdog@e6020000 { + rwdt: watchdog@e6020000 { compatible = "renesas,r8a7795-wdt", "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; clocks = <&cpg CPG_MOD 402>; @@ -528,6 +525,15 @@ status = "disabled"; }; + arm_cc630p: crypto@e6601000 { + compatible = "arm,cryptocell-630p-ree"; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0xe6601000 0 0x1000>; + clocks = <&cpg CPG_MOD 229>; + resets = <&cpg 229>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + }; + i2c3: i2c@e66d0000 { #address-cells = <1>; #size-cells = <0>; @@ -2530,7 +2536,7 @@ vspd0: vsp@fea20000 { compatible = "renesas,vsp2"; - reg = <0 0xfea20000 0 0x8000>; + reg = <0 0xfea20000 0 0x5000>; interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 623>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -2541,7 +2547,7 @@ vspd1: vsp@fea28000 { compatible = "renesas,vsp2"; - reg = <0 0xfea28000 0 0x8000>; + reg = <0 0xfea28000 0 0x5000>; interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 622>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -2552,7 +2558,7 @@ vspd2: vsp@fea30000 { compatible = "renesas,vsp2"; - reg = <0 0xfea30000 0 0x8000>; + reg = <0 0xfea30000 0 0x5000>; interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 621>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts index de2390f009e7..2df50eb11f16 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the M3ULCB Kingfisher board * * Copyright (C) 2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include "r8a7796-m3ulcb.dts" diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts index daee1f1a3f68..cbd8acbf537e 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board * * Copyright (C) 2016 Renesas Electronics Corp. * Copyright (C) 2016 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts index 90cca09b9a5e..052d72acc862 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Salvator-X board with R-Car M3-W * * Copyright (C) 2016 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts index ddf35d4cd5e5..8860be65342e 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Salvator-X 2nd version board with R-Car M3-W * * Copyright (C) 2015-2017 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index 7c25be6b5af3..cbd35c00b4af 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a7796 SoC * - * Copyright (C) 2016 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. + * Copyright (C) 2016-2017 Renesas Electronics Corp. */ #include <dt-bindings/clock/r8a7796-cpg-mssr.h> @@ -269,7 +266,7 @@ #size-cells = <2>; ranges; - wdt0: watchdog@e6020000 { + rwdt: watchdog@e6020000 { compatible = "renesas,r8a7796-wdt", "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; @@ -2108,13 +2105,57 @@ }; pciec0: pcie@fe000000 { + compatible = "renesas,pcie-r8a7796", + "renesas,pcie-rcar-gen3"; reg = <0 0xfe000000 0 0x80000>; - /* placeholder */ + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 319>; + status = "disabled"; }; pciec1: pcie@ee800000 { + compatible = "renesas,pcie-r8a7796", + "renesas,pcie-rcar-gen3"; reg = <0 0xee800000 0 0x80000>; - /* placeholder */ + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000 + 0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000 + 0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000 + 0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 318>; + status = "disabled"; }; imr-lx4@fe860000 { @@ -2212,7 +2253,7 @@ vspd0: vsp@fea20000 { compatible = "renesas,vsp2"; - reg = <0 0xfea20000 0 0x8000>; + reg = <0 0xfea20000 0 0x5000>; interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 623>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; @@ -2223,7 +2264,7 @@ vspd1: vsp@fea28000 { compatible = "renesas,vsp2"; - reg = <0 0xfea28000 0 0x8000>; + reg = <0 0xfea28000 0 0x5000>; interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 622>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; @@ -2234,7 +2275,7 @@ vspd2: vsp@fea30000 { compatible = "renesas,vsp2"; - reg = <0 0xfea30000 0 0x8000>; + reg = <0 0xfea30000 0 0x5000>; interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 621>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index 486aecacb22a..0cd44461a0bd 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -138,9 +138,14 @@ #size-cells = <2>; ranges; - wdt0: watchdog@e6020000 { + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a77965-wdt", + "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; - /* placeholder */ + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 402>; + status = "disabled"; }; gpio0: gpio@e6050000 { @@ -451,6 +456,94 @@ status = "disabled"; }; + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a77965", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6540000 0 0x60>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 520>, + <&cpg CPG_CORE R8A77965_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>, + <&dmac2 0x31>, <&dmac2 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 520>; + status = "disabled"; + }; + + hscif1: serial@e6550000 { + compatible = "renesas,hscif-r8a77965", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6550000 0 0x60>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 519>, + <&cpg CPG_CORE R8A77965_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x33>, <&dmac1 0x32>, + <&dmac2 0x33>, <&dmac2 0x32>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 519>; + status = "disabled"; + }; + + hscif2: serial@e6560000 { + compatible = "renesas,hscif-r8a77965", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6560000 0 0x60>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 518>, + <&cpg CPG_CORE R8A77965_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x35>, <&dmac1 0x34>, + <&dmac2 0x35>, <&dmac2 0x34>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 518>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a77965", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66a0000 0 0x60>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE R8A77965_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x37>, <&dmac0 0x36>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 517>; + status = "disabled"; + }; + + hscif4: serial@e66b0000 { + compatible = "renesas,hscif-r8a77965", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66b0000 0 0x60>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 516>, + <&cpg CPG_CORE R8A77965_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x38>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 516>; + status = "disabled"; + }; + hsusb: usb@e6590000 { compatible = "renesas,usbhs-r8a7796", "renesas,rcar-gen3-usbhs"; @@ -611,6 +704,95 @@ dma-channels = <16>; }; + ipmmu_ds0: mmu@e6740000 { + compatible = "renesas,ipmmu-r8a77965"; + reg = <0 0xe6740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ds1: mmu@e7740000 { + compatible = "renesas,ipmmu-r8a77965"; + reg = <0 0xe7740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 1>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_hc: mmu@e6570000 { + compatible = "renesas,ipmmu-r8a77965"; + reg = <0 0xe6570000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 2>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ir: mmu@ff8b0000 { + compatible = "renesas,ipmmu-r8a77965"; + reg = <0 0xff8b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 3>; + power-domains = <&sysc R8A77965_PD_A3IR>; + #iommu-cells = <1>; + }; + + ipmmu_mm: mmu@e67b0000 { + compatible = "renesas,ipmmu-r8a77965"; + reg = <0 0xe67b0000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mp: mmu@ec670000 { + compatible = "renesas,ipmmu-r8a77965"; + reg = <0 0xec670000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 4>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_pv0: mmu@fd800000 { + compatible = "renesas,ipmmu-r8a77965"; + reg = <0 0xfd800000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 6>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_rt: mmu@ffc80000 { + compatible = "renesas,ipmmu-r8a77965"; + reg = <0 0xffc80000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 10>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vc0: mmu@fe6b0000 { + compatible = "renesas,ipmmu-r8a77965"; + reg = <0 0xfe6b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 12>; + power-domains = <&sysc R8A77965_PD_A3VC>; + #iommu-cells = <1>; + }; + + ipmmu_vi0: mmu@febd0000 { + compatible = "renesas,ipmmu-r8a77965"; + reg = <0 0xfebd0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 14>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vp0: mmu@fe990000 { + compatible = "renesas,ipmmu-r8a77965"; + reg = <0 0xfe990000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 16>; + power-domains = <&sysc R8A77965_PD_A3VP>; + #iommu-cells = <1>; + }; + avb: ethernet@e6800000 { compatible = "renesas,etheravb-r8a77965", "renesas,etheravb-rcar-gen3"; @@ -732,7 +914,7 @@ reg = <0 0xe6e60000 0 64>; interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 207>, - <&cpg CPG_CORE 20>, + <&cpg CPG_CORE R8A77965_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x51>, <&dmac1 0x50>, @@ -749,7 +931,7 @@ reg = <0 0xe6e68000 0 64>; interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 206>, - <&cpg CPG_CORE 20>, + <&cpg CPG_CORE R8A77965_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x53>, <&dmac1 0x52>, @@ -766,7 +948,7 @@ reg = <0 0xe6e88000 0 64>; interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 310>, - <&cpg CPG_CORE 20>, + <&cpg CPG_CORE R8A77965_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; @@ -780,7 +962,7 @@ reg = <0 0xe6c50000 0 64>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 204>, - <&cpg CPG_CORE 20>, + <&cpg CPG_CORE R8A77965_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x57>, <&dmac0 0x56>; @@ -796,7 +978,7 @@ reg = <0 0xe6c40000 0 64>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 203>, - <&cpg CPG_CORE 20>, + <&cpg CPG_CORE R8A77965_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x59>, <&dmac0 0x58>; @@ -812,7 +994,7 @@ reg = <0 0xe6f30000 0 64>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 202>, - <&cpg CPG_CORE 20>, + <&cpg CPG_CORE R8A77965_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x5b>, <&dmac1 0x5a>, @@ -1176,6 +1358,9 @@ port@0 { reg = <0>; }; + port@1 { + reg = <1>; + }; }; }; @@ -1340,13 +1525,57 @@ }; pciec0: pcie@fe000000 { + compatible = "renesas,pcie-r8a77965", + "renesas,pcie-rcar-gen3"; reg = <0 0xfe000000 0 0x80000>; - /* placeholder */ + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 319>; + status = "disabled"; }; pciec1: pcie@ee800000 { + compatible = "renesas,pcie-r8a77965", + "renesas,pcie-rcar-gen3"; reg = <0 0xee800000 0 0x80000>; - /* placeholder */ + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000 + 0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000 + 0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000 + 0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 318>; + status = "disabled"; }; fcpf0: fcp@fe950000 { @@ -1397,7 +1626,7 @@ vspd0: vsp@fea20000 { compatible = "renesas,vsp2"; - reg = <0 0xfea20000 0 0x8000>; + reg = <0 0xfea20000 0 0x5000>; interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 623>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; @@ -1416,7 +1645,7 @@ vspd1: vsp@fea28000 { compatible = "renesas,vsp2"; - reg = <0 0xfea28000 0 0x8000>; + reg = <0 0xfea28000 0 0x5000>; interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 622>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index 21f9cf5c6e84..b6d53321576b 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Eagle board * * Copyright (C) 2016-2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts index 9fce031a596f..8eac8ca6550b 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the V3M Starter Kit board * * Copyright (C) 2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi index 98a2317a16c4..954168858fed 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a77970 SoC * * Copyright (C) 2016-2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a77970-cpg-mssr.h> @@ -776,7 +773,7 @@ vspd0: vsp@fea20000 { compatible = "renesas,vsp2"; - reg = <0 0xfea20000 0 0x8000>; + reg = <0 0xfea20000 0 0x5000>; interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 623>; power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts index 0b93a7d76585..9f25c407dfd7 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts @@ -59,6 +59,8 @@ phy0: ethernet-phy@0 { rxc-skew-ps = <1500>; reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; }; }; @@ -80,6 +82,28 @@ clock-frequency = <32768>; }; +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + io_expander0: gpio@20 { + compatible = "onnn,pca9654"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + io_expander1: gpio@21 { + compatible = "onnn,pca9654"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + &mmc0 { pinctrl-0 = <&mmc_pins>; pinctrl-1 = <&mmc_pins_uhs>; @@ -104,6 +128,11 @@ function = "canfd0"; }; + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + mmc_pins: mmc { groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; function = "mmc"; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts index c9680994555d..9dac42f8f804 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts @@ -15,6 +15,7 @@ aliases { serial0 = &scif0; + ethernet0 = &gether; }; chosen { @@ -36,7 +37,29 @@ clock-frequency = <32768>; }; +&gether { + pinctrl-0 = <&gether_pins>; + pinctrl-names = "default"; + + phy-mode = "rgmii"; + phy-handle = <&phy0>; + renesas,no-ether-link; + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + interrupt-parent = <&gpio4>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + }; +}; + &pfc { + gether_pins: gether { + groups = "gether_mdio_a", "gether_rgmii", + "gether_txcrefclk", "gether_txcrefclk_mega"; + function = "gether"; + }; + scif0_pins: scif0 { groups = "scif0_data"; function = "scif0"; diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi index 4c40f9f0ebc9..b8c9a56562f2 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi @@ -16,6 +16,15 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -30,6 +39,36 @@ enable-method = "psci"; }; + a53_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <1>; + clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>; + power-domains = <&sysc R8A77980_PD_CA53_CPU1>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + + a53_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <2>; + clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>; + power-domains = <&sysc R8A77980_PD_CA53_CPU2>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + + a53_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <3>; + clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>; + power-domains = <&sysc R8A77980_PD_CA53_CPU3>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + L2_CA53: cache-controller { compatible = "cache"; power-domains = <&sysc R8A77980_PD_CA53_SCU>; @@ -79,6 +118,96 @@ #size-cells = <2>; ranges; + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a77980", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 22>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 912>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a77980", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 28>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 911>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a77980", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 30>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 910>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a77980", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 17>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 909>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a77980", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 25>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 908>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a77980", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 15>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 907>; + }; + pfc: pin-controller@e6060000 { compatible = "renesas,pfc-r8a77980"; reg = <0 0xe6060000 0 0x50c>; @@ -105,6 +234,118 @@ #power-domain-cells = <1>; }; + intc_ex: interrupt-controller@e61c0000 { + compatible = "renesas,intc-ex-r8a77980", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 407>; + }; + + i2c0: i2c@e6500000 { + compatible = "renesas,i2c-r8a77980", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6500000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 931>; + dmas = <&dmac1 0x91>, <&dmac1 0x90>, + <&dmac2 0x91>, <&dmac2 0x90>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + compatible = "renesas,i2c-r8a77980", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 930>; + dmas = <&dmac1 0x93>, <&dmac1 0x92>, + <&dmac2 0x93>, <&dmac2 0x92>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@e6510000 { + compatible = "renesas,i2c-r8a77980", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6510000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 929>; + dmas = <&dmac1 0x95>, <&dmac1 0x94>, + <&dmac2 0x95>, <&dmac2 0x94>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@e66d0000 { + compatible = "renesas,i2c-r8a77980", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 928>; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@e66d8000 { + compatible = "renesas,i2c-r8a77980", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d8000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 927>; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@e66e0000 { + compatible = "renesas,i2c-r8a77980", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e0000 0 0x40>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 919>; + dmas = <&dmac1 0x9b>, <&dmac1 0x9a>, + <&dmac2 0x9b>, <&dmac2 0x9a>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + hscif0: serial@e6540000 { compatible = "renesas,hscif-r8a77980", "renesas,rcar-gen3-hscif", @@ -202,6 +443,69 @@ }; }; + ipmmu_ds1: mmu@e7740000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xe7740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vip0: mmu@e7b00000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xe7b00000 0 0x1000>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vip1: mmu@e7960000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xe7960000 0 0x1000>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ir: mmu@ff8b0000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xff8b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 3>; + power-domains = <&sysc R8A77980_PD_A3IR>; + #iommu-cells = <1>; + }; + + ipmmu_mm: mmu@e67b0000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xe67b0000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_rt: mmu@ffc80000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xffc80000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 10>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vc0: mmu@fe6b0000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xfe6b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 12>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vi0: mmu@febd0000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xfebd0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 14>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + avb: ethernet@e6800000 { compatible = "renesas,etheravb-r8a77980", "renesas,etheravb-rcar-gen3"; @@ -387,6 +691,18 @@ dma-channels = <16>; }; + gether: ethernet@e7400000 { + compatible = "renesas,gether-r8a77980"; + reg = <0 0xe7400000 0 0x1000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 813>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 813>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + mmc0: mmc@ee140000 { compatible = "renesas,sdhi-r8a77980", "renesas,rcar-gen3-sdhi"; @@ -408,7 +724,7 @@ <0x0 0xf1020000 0 0x20000>, <0x0 0xf1040000 0 0x20000>, <0x0 0xf1060000 0 0x20000>; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; @@ -416,6 +732,83 @@ resets = <&cpg 408>; }; + vspd0: vsp@fea20000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea20000 0 0x5000>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 623>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 623>; + renesas,fcp = <&fcpvd0>; + }; + + fcpvd0: fcp@fea27000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea27000 0 0x200>; + clocks = <&cpg CPG_MOD 603>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 603>; + }; + + du: display@feb00000 { + compatible = "renesas,du-r8a77980", + "renesas,du-r8a77970"; + reg = <0 0xfeb00000 0 0x80000>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>; + clock-names = "du.0"; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 724>; + vsps = <&vspd0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + + port@1 { + reg = <1>; + du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + }; + }; + + lvds0: lvds-encoder@feb90000 { + compatible = "renesas,r8a77980-lvds"; + reg = <0 0xfeb90000 0 0x14>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 727>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = + <&du_out_lvds0>; + }; + }; + + port@1 { + reg = <1>; + lvds0_out: endpoint { + }; + }; + }; + }; + prr: chipid@fff00044 { compatible = "renesas,prr"; reg = <0 0xfff00044 0 4>; @@ -424,13 +817,13 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts index 7a09d0524f9b..2bc3a4884b00 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts @@ -47,10 +47,18 @@ }; }; +&ehci0 { + status = "okay"; +}; + &extal_clk { clock-frequency = <48000000>; }; +&ohci0 { + status = "okay"; +}; + &pfc { avb_pins: avb { mux { @@ -58,8 +66,37 @@ function = "avb"; }; }; + + usb0_pins: usb { + groups = "usb0_b"; + function = "usb0"; + }; + + usb30_pins: usb30 { + groups = "usb30"; + function = "usb30"; + }; +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; }; &scif2 { status = "okay"; }; + +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&xhci0 { + pinctrl-0 = <&usb30_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index be4f519711a1..ae89260baad9 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/clock/renesas-cpg-mssr.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/r8a77990-sysc.h> / { compatible = "renesas,r8a77990"; @@ -17,16 +18,24 @@ #address-cells = <1>; #size-cells = <0>; - /* 1 core only at this point */ a53_0: cpu@0 { compatible = "arm,cortex-a53", "arm,armv8"; - reg = <0x0>; + reg = <0>; device_type = "cpu"; power-domains = <&sysc 5>; next-level-cache = <&L2_CA53>; enable-method = "psci"; }; + a53_1: cpu@1 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <1>; + device_type = "cpu"; + power-domains = <&sysc 6>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + L2_CA53: cache-controller-0 { compatible = "cache"; power-domains = <&sysc 21>; @@ -44,8 +53,9 @@ pmu_a53 { compatible = "arm,cortex-a53-pmu"; - interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&a53_0>; + interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a53_0>, <&a53_1>; }; psci { @@ -60,6 +70,16 @@ #size-cells = <2>; ranges; + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a77990-wdt", + "renesas,rcar-gen3-wdt"; + reg = <0 0xe6020000 0 0x0c>; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc 32>; + resets = <&cpg 402>; + status = "disabled"; + }; + gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a77990", "renesas,rcar-gen3-gpio"; @@ -191,10 +211,91 @@ #power-domain-cells = <1>; }; + ipmmu_ds0: mmu@e6740000 { + compatible = "renesas,ipmmu-r8a77990"; + reg = <0 0xe6740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ds1: mmu@e7740000 { + compatible = "renesas,ipmmu-r8a77990"; + reg = <0 0xe7740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 1>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_hc: mmu@e6570000 { + compatible = "renesas,ipmmu-r8a77990"; + reg = <0 0xe6570000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 2>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mm: mmu@e67b0000 { + compatible = "renesas,ipmmu-r8a77990"; + reg = <0 0xe67b0000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mp: mmu@ec670000 { + compatible = "renesas,ipmmu-r8a77990"; + reg = <0 0xec670000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 4>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_pv0: mmu@fd800000 { + compatible = "renesas,ipmmu-r8a77990"; + reg = <0 0xfd800000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 6>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_rt: mmu@ffc80000 { + compatible = "renesas,ipmmu-r8a77990"; + reg = <0 0xffc80000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 10>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vc0: mmu@fe6b0000 { + compatible = "renesas,ipmmu-r8a77990"; + reg = <0 0xfe6b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 12>; + power-domains = <&sysc R8A77990_PD_A3VC>; + #iommu-cells = <1>; + }; + + ipmmu_vi0: mmu@febd0000 { + compatible = "renesas,ipmmu-r8a77990"; + reg = <0 0xfebd0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 14>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vp0: mmu@fe990000 { + compatible = "renesas,ipmmu-r8a77990"; + reg = <0 0xfe990000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 16>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + avb: ethernet@e6800000 { compatible = "renesas,etheravb-r8a77990", "renesas,etheravb-rcar-gen3"; - reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>; + reg = <0 0xe6800000 0 0x800>; interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, @@ -248,6 +349,54 @@ status = "disabled"; }; + xhci0: usb@ee000000 { + compatible = "renesas,xhci-r8a77990", + "renesas,rcar-gen3-xhci"; + reg = <0 0xee000000 0 0xc00>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 328>; + status = "disabled"; + }; + + ohci0: usb@ee080000 { + compatible = "generic-ohci"; + reg = <0 0xee080000 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&sysc 32>; + resets = <&cpg 703>; + status = "disabled"; + }; + + ehci0: usb@ee080100 { + compatible = "generic-ehci"; + reg = <0 0xee080100 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + phys = <&usb2_phy0>; + phy-names = "usb"; + companion = <&ohci0>; + power-domains = <&sysc 32>; + resets = <&cpg 703>; + status = "disabled"; + }; + + usb2_phy0: usb-phy@ee080200 { + compatible = "renesas,usb2-phy-r8a77990", + "renesas,rcar-gen3-usb2-phy"; + reg = <0 0xee080200 0 0x700>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc 32>; + resets = <&cpg 703>; + #phy-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@f1010000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -258,7 +407,7 @@ <0x0 0xf1040000 0 0x20000>, <0x0 0xf1060000 0 0x20000>; interrupts = <GIC_PPI 9 - (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; power-domains = <&sysc 32>; @@ -273,9 +422,9 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index 9d73de8bc94d..a8e8f2669d4c 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Draak board * * Copyright (C) 2016 Renesas Electronics Corp. * Copyright (C) 2017 Glider bvba - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; @@ -59,6 +56,27 @@ }; }; + composite-in { + compatible = "composite-video-connector"; + + port { + composite_con_in: endpoint { + remote-endpoint = <&adv7180_in>; + }; + }; + }; + + hdmi-in { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&adv7612_in>; + }; + }; + }; + memory@48000000 { device_type = "memory"; /* first 128MB is reserved for secure area. */ @@ -82,6 +100,12 @@ regulator-boot-on; regulator-always-on; }; + + x12_clk: x12 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; + }; }; &extal_clk { @@ -142,6 +166,11 @@ groups = "usb0"; function = "usb0"; }; + + vin4_pins_cvbs: vin4 { + groups = "vin4_data8", "vin4_sync", "vin4_clk"; + function = "vin4"; + }; }; &i2c0 { @@ -154,6 +183,77 @@ reg = <0x50>; pagesize = <8>; }; + + composite-in@20 { + compatible = "adi,adv7180cp"; + reg = <0x20>; + + port { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7180_in: endpoint { + remote-endpoint = <&composite_con_in>; + }; + }; + + port@3 { + reg = <3>; + + /* + * The VIN4 video input path is shared between + * CVBS and HDMI inputs through SW[49-53] + * switches. + * + * CVBS is the default selection, link it to + * VIN4 here. + */ + adv7180_out: endpoint { + remote-endpoint = <&vin4_in>; + }; + }; + }; + + }; + + hdmi-decoder@4c { + compatible = "adi,adv7612"; + reg = <0x4c>; + default-input = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adv7612_in: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + + port@2 { + reg = <2>; + + /* + * The VIN4 video input path is shared between + * CVBS and HDMI inputs through SW[49-53] + * switches. + * + * CVBS is the default selection, leave HDMI + * not connected here. + */ + adv7612_out: endpoint { + pclk-sample = <0>; + hsync-active = <0>; + vsync-active = <0>; + }; + }; + }; + }; }; &i2c1 { @@ -167,6 +267,11 @@ pinctrl-names = "default"; status = "okay"; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&x12_clk>; + clock-names = "du.0", "du.1", "dclkin.0"; + ports { port@0 { endpoint { @@ -246,3 +351,23 @@ timeout-sec = <60>; status = "okay"; }; + +&vin4 { + pinctrl-0 = <&vin4_pins_cvbs>; + pinctrl-names = "default"; + + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + vin4_in: endpoint { + remote-endpoint = <&adv7180_out>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi index 2506f46293e8..fe77bc43c447 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a77995 SoC * * Copyright (C) 2016 Renesas Electronics Corp. * Copyright (C) 2017 Glider bvba - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a77995-cpg-mssr.h> @@ -88,8 +85,7 @@ gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a77995", - "renesas,rcar-gen3-gpio", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6050000 0 0x50>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -104,8 +100,7 @@ gpio1: gpio@e6051000 { compatible = "renesas,gpio-r8a77995", - "renesas,rcar-gen3-gpio", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6051000 0 0x50>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -120,8 +115,7 @@ gpio2: gpio@e6052000 { compatible = "renesas,gpio-r8a77995", - "renesas,rcar-gen3-gpio", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6052000 0 0x50>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -136,8 +130,7 @@ gpio3: gpio@e6053000 { compatible = "renesas,gpio-r8a77995", - "renesas,rcar-gen3-gpio", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6053000 0 0x50>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -152,8 +145,7 @@ gpio4: gpio@e6054000 { compatible = "renesas,gpio-r8a77995", - "renesas,rcar-gen3-gpio", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6054000 0 0x50>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -168,8 +160,7 @@ gpio5: gpio@e6055000 { compatible = "renesas,gpio-r8a77995", - "renesas,rcar-gen3-gpio", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6055000 0 0x50>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -184,8 +175,7 @@ gpio6: gpio@e6055400 { compatible = "renesas,gpio-r8a77995", - "renesas,rcar-gen3-gpio", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6055400 0 0x50>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -224,6 +214,18 @@ #power-domain-cells = <1>; }; + thermal: thermal@e6190000 { + compatible = "renesas,thermal-r8a77995"; + reg = <0 0xe6190000 0 0x10>, <0 0xe6190100 0 0x38>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <0>; + }; + intc_ex: interrupt-controller@e61c0000 { compatible = "renesas,intc-ex-r8a77995", "renesas,irqc"; #interrupt-cells = <2>; @@ -240,6 +242,41 @@ resets = <&cpg 407>; }; + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a77995", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6540000 0 0x60>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 520>, + <&cpg CPG_CORE R8A77995_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>, + <&dmac2 0x31>, <&dmac2 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 520>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a77995", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66a0000 0 0x60>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE R8A77995_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x37>, <&dmac0 0x36>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 517>; + status = "disabled"; + }; + i2c0: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; @@ -408,6 +445,7 @@ compatible = "renesas,ipmmu-r8a77995"; reg = <0 0xe6740000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -415,6 +453,7 @@ compatible = "renesas,ipmmu-r8a77995"; reg = <0 0xe7740000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 1>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -422,6 +461,7 @@ compatible = "renesas,ipmmu-r8a77995"; reg = <0 0xe6570000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 2>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -430,6 +470,7 @@ reg = <0 0xe67b0000 0 0x1000>; interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -437,6 +478,7 @@ compatible = "renesas,ipmmu-r8a77995"; reg = <0 0xec670000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 4>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -444,6 +486,7 @@ compatible = "renesas,ipmmu-r8a77995"; reg = <0 0xfd800000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 6>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -451,6 +494,7 @@ compatible = "renesas,ipmmu-r8a77995"; reg = <0 0xffc80000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 10>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -458,6 +502,7 @@ compatible = "renesas,ipmmu-r8a77995"; reg = <0 0xfe6b0000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 12>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -465,6 +510,7 @@ compatible = "renesas,ipmmu-r8a77995"; reg = <0 0xfebd0000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 14>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -472,6 +518,7 @@ compatible = "renesas,ipmmu-r8a77995"; reg = <0 0xfe990000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 16>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -593,6 +640,40 @@ status = "disabled"; }; + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a77995", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 64>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>, + <&cpg CPG_CORE R8A77995_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x51>, <&dmac1 0x50>, + <&dmac2 0x51>, <&dmac2 0x50>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 207>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a77995", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 64>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>, + <&cpg CPG_CORE R8A77995_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x53>, <&dmac1 0x52>, + <&dmac2 0x53>, <&dmac2 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 206>; + status = "disabled"; + }; + scif2: serial@e6e88000 { compatible = "renesas,scif-r8a77995", "renesas,rcar-gen3-scif", "renesas,scif"; @@ -610,6 +691,117 @@ status = "disabled"; }; + scif3: serial@e6c50000 { + compatible = "renesas,scif-r8a77995", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c50000 0 64>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>, + <&cpg CPG_CORE R8A77995_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x57>, <&dmac0 0x56>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 204>; + status = "disabled"; + }; + + scif4: serial@e6c40000 { + compatible = "renesas,scif-r8a77995", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c40000 0 64>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>, + <&cpg CPG_CORE R8A77995_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x59>, <&dmac0 0x58>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 203>; + status = "disabled"; + }; + + scif5: serial@e6f30000 { + compatible = "renesas,scif-r8a77995", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6f30000 0 64>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 202>, + <&cpg CPG_CORE R8A77995_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x5b>, <&dmac1 0x5a>, + <&dmac2 0x5b>, <&dmac2 0x5a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 202>; + status = "disabled"; + }; + + msiof0: spi@e6e90000 { + compatible = "renesas,msiof-r8a77995", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6e90000 0 0x64>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 211>; + dmas = <&dmac1 0x41>, <&dmac1 0x40>, + <&dmac2 0x41>, <&dmac2 0x40>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 211>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6ea0000 { + compatible = "renesas,msiof-r8a77995", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6ea0000 0 0x64>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 210>; + dmas = <&dmac1 0x43>, <&dmac1 0x42>, + <&dmac2 0x43>, <&dmac2 0x42>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 210>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6c00000 { + compatible = "renesas,msiof-r8a77995", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c00000 0 0x64>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 209>; + dmas = <&dmac0 0x45>, <&dmac0 0x44>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 209>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof3: spi@e6c10000 { + compatible = "renesas,msiof-r8a77995", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c10000 0 0x64>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 208>; + dmas = <&dmac0 0x47>, <&dmac0 0x46>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 208>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + vin4: video@e6ef4000 { compatible = "renesas,vin-r8a77995"; reg = <0 0xe6ef4000 0 0x1000>; @@ -699,7 +891,7 @@ vspd0: vsp@fea20000 { compatible = "renesas,vsp2"; - reg = <0 0xfea20000 0 0x8000>; + reg = <0 0xfea20000 0 0x5000>; interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 623>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; @@ -709,7 +901,7 @@ vspd1: vsp@fea28000 { compatible = "renesas,vsp2"; - reg = <0 0xfea28000 0 0x8000>; + reg = <0 0xfea28000 0 0x5000>; interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 622>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; @@ -785,6 +977,25 @@ }; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index 9256fbaaab7f..7d3d866a0063 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for common parts of Salvator-X board variants * * Copyright (C) 2015-2016 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /* @@ -36,7 +33,7 @@ / { aliases { serial0 = &scif2; - serial1 = &scif1; + serial1 = &hscif1; ethernet0 = &avb; }; @@ -341,6 +338,15 @@ clock-frequency = <32768>; }; +&hscif1 { + pinctrl-0 = <&hscif1_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + /* Please only enable hscif1 or scif1 */ + status = "okay"; +}; + &hsusb { dr_mode = "otg"; status = "okay"; @@ -440,7 +446,7 @@ }; }; - port@10 { + port@a { reg = <10>; adv7482_txa: endpoint { @@ -450,7 +456,7 @@ }; }; - port@11 { + port@b { reg = <11>; adv7482_txb: endpoint { @@ -546,6 +552,11 @@ function = "du"; }; + hscif1_pins: hscif1 { + groups = "hscif1_data_a", "hscif1_ctrl_a"; + function = "hscif1"; + }; + i2c2_pins: i2c2 { groups = "i2c2_a"; function = "i2c2"; @@ -589,13 +600,13 @@ }; sdhi2_pins: sd2 { - groups = "sdhi2_data8", "sdhi2_ctrl"; + groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds"; function = "sdhi2"; power-source = <3300>; }; sdhi2_pins_uhs: sd2_uhs { - groups = "sdhi2_data8", "sdhi2_ctrl"; + groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds"; function = "sdhi2"; power-source = <1800>; }; @@ -711,7 +722,8 @@ pinctrl-names = "default"; uart-has-rtscts; - status = "okay"; + /* Please only enable hscif1 or scif1 */ + /* status = "okay"; */ }; &scif2 { @@ -838,7 +850,7 @@ status = "okay"; }; -&wdt0 { +&rwdt { timeout-sec = <60>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/salvator-x.dtsi b/arch/arm64/boot/dts/renesas/salvator-x.dtsi index 468868c8ed9f..ddee50e64632 100644 --- a/arch/arm64/boot/dts/renesas/salvator-x.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-x.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Salvator-X board * * Copyright (C) 2015-2016 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include "salvator-common.dtsi" @@ -20,6 +17,8 @@ }; &i2c4 { + clock-frequency = <400000>; + versaclock5: clock-generator@6a { compatible = "idt,5p49v5923"; reg = <0x6a>; diff --git a/arch/arm64/boot/dts/renesas/salvator-xs.dtsi b/arch/arm64/boot/dts/renesas/salvator-xs.dtsi index bf4d200fb546..717d42758cbc 100644 --- a/arch/arm64/boot/dts/renesas/salvator-xs.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-xs.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Salvator-X 2nd version board * * Copyright (C) 2015-2017 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include "salvator-common.dtsi" @@ -20,6 +17,8 @@ }; &i2c4 { + clock-frequency = <400000>; + versaclock6: clock-generator@6a { compatible = "idt,5p49v6901"; reg = <0x6a>; diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi index a4e715cbde87..8bf3091a899c 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Kingfisher (ULCB extension) board * * Copyright (C) 2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ / { diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 0edb16e6b372..0ead552d7eae 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the R-Car Gen3 ULCB board * * Copyright (C) 2016 Renesas Electronics Corp. * Copyright (C) 2016 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/gpio/gpio.h> @@ -330,13 +327,13 @@ }; sdhi2_pins: sd2 { - groups = "sdhi2_data8", "sdhi2_ctrl"; + groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds"; function = "sdhi2"; power-source = <3300>; }; sdhi2_pins_uhs: sd2_uhs { - groups = "sdhi2_data8", "sdhi2_ctrl"; + groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds"; function = "sdhi2"; power-source = <1800>; }; @@ -447,7 +444,7 @@ status = "okay"; }; -&wdt0 { +&rwdt { timeout-sec = <60>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 48a83f882947..7c4311eac700 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-bob.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts index 3d551e3e6c23..8302d86d35c4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts index 28257724a56e..5272e887a434 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 PINE64 - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index b8e9da15e00c..3f5a2944300f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/clock/rk3328-cru.h> @@ -89,6 +52,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x1>; clocks = <&cru ARMCLK>; + #cooling-cells = <2>; dynamic-power-coefficient = <120>; enable-method = "psci"; next-level-cache = <&l2>; @@ -100,6 +64,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x2>; clocks = <&cru ARMCLK>; + #cooling-cells = <2>; dynamic-power-coefficient = <120>; enable-method = "psci"; next-level-cache = <&l2>; @@ -111,6 +76,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x3>; clocks = <&cru ARMCLK>; + #cooling-cells = <2>; dynamic-power-coefficient = <120>; enable-method = "psci"; next-level-cache = <&l2>; @@ -331,7 +297,7 @@ reg = <0x0 0xff120000 0x0 0x100>; interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; - clock-names = "sclk_uart", "pclk_uart"; + clock-names = "baudclk", "apb_pclk"; dmas = <&dmac 4>, <&dmac 5>; dma-names = "tx", "rx"; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dts b/arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dts index 8a5275f0539b..160f2c7e9559 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2015 Caesar Wang <wxt@rock-chips.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi index a37220a9387c..4de089149c50 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2015 Caesar Wang <wxt@rock-chips.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/input/input.h> diff --git a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts index 5e4d3a7015f5..6b9b1ac1994c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Andreas Färber - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts index d3f6c8e0d206..96147d93dd1d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Matthias Brugger <mbrugger@suse.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts index 13a9e22f5d2d..fc1bf078a41f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts index b3510d56517a..7452bedf1a7e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index ad91ced78649..9c24de1ba43c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/clock/rk3368-cru.h> @@ -113,7 +76,6 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x0>; enable-method = "psci"; - #cooling-cells = <2>; /* min followed by max */ }; @@ -122,6 +84,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x1>; enable-method = "psci"; + #cooling-cells = <2>; /* min followed by max */ }; cpu_l2: cpu@2 { @@ -129,6 +92,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x2>; enable-method = "psci"; + #cooling-cells = <2>; /* min followed by max */ }; cpu_l3: cpu@3 { @@ -136,6 +100,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x3>; enable-method = "psci"; + #cooling-cells = <2>; /* min followed by max */ }; cpu_b0: cpu@100 { @@ -143,7 +108,6 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x100>; enable-method = "psci"; - #cooling-cells = <2>; /* min followed by max */ }; @@ -152,6 +116,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x101>; enable-method = "psci"; + #cooling-cells = <2>; /* min followed by max */ }; cpu_b2: cpu@102 { @@ -159,6 +124,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x102>; enable-method = "psci"; + #cooling-cells = <2>; /* min followed by max */ }; cpu_b3: cpu@103 { @@ -166,6 +132,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x103>; enable-method = "psci"; + #cooling-cells = <2>; /* min followed by max */ }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts index 56533c344ef2..959ddc3c7df5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts index 2a352763c848..e378ddb39eef 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -529,19 +492,16 @@ &i2s0 { rockchip,playback-channels = <8>; rockchip,capture-channels = <8>; - #sound-dai-cells = <0>; status = "okay"; }; &i2s1 { rockchip,playback-channels = <2>; rockchip,capture-channels = <2>; - #sound-dai-cells = <0>; status = "okay"; }; &i2s2 { - #sound-dai-cells = <0>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts new file mode 100644 index 000000000000..1ee0dc0d9f10 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Gru-Bob Rev 4+ board device tree source + * + * Copyright 2018 Google, Inc + */ + +/dts-v1/; +#include "rk3399-gru-chromebook.dtsi" + +/ { + model = "Google Bob"; + compatible = "google,bob-rev13", "google,bob-rev12", + "google,bob-rev11", "google,bob-rev10", + "google,bob-rev9", "google,bob-rev8", + "google,bob-rev7", "google,bob-rev6", + "google,bob-rev5", "google,bob-rev4", + "google,bob", "google,gru", "rockchip,rk3399"; + + edp_panel: edp-panel { + compatible = "boe,nv101wxmn51", "simple-panel"; + backlight = <&backlight>; + power-supply = <&pp3300_disp>; + + ports { + panel_in_edp: endpoint { + remote-endpoint = <&edp_out_panel>; + }; + }; + }; +}; + +&ap_i2c_ts { + touchscreen: touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + interrupt-parent = <&gpio3>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&touch_int_l &touch_reset_l>; + reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; + }; +}; + +&ap_i2c_tp { + trackpad: trackpad@15 { + compatible = "elan,ekth3000"; + reg = <0x15>; + interrupt-parent = <&gpio1>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_int_l>; + wakeup-source; + }; +}; + +&backlight { + pwms = <&cros_ec_pwm 0>; +}; + +&cpu_alert0 { + temperature = <65000>; +}; + +&cpu_alert1 { + temperature = <70000>; +}; + +&spi0 { + status = "okay"; +}; + +&pinctrl { + tpm { + h1_int_od_l: h1-int-od-l { + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi new file mode 100644 index 000000000000..ff81dfda3b95 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi @@ -0,0 +1,397 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Gru-Chromebook shared properties + * + * Copyright 2018 Google, Inc + */ + +#include "rk3399-gru.dtsi" + +/ { + pp900_ap: pp900-ap { + compatible = "regulator-fixed"; + regulator-name = "pp900_ap"; + + /* EC turns on w/ pp900_ap_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + vin-supply = <&ppvar_sys>; + }; + + /* EC turns on w/ pp900_usb_en */ + pp900_usb: pp900-ap { + }; + + /* EC turns on w/ pp900_pcie_en */ + pp900_pcie: pp900-ap { + }; + + pp3000: pp3000 { + compatible = "regulator-fixed"; + regulator-name = "pp3000"; + pinctrl-names = "default"; + pinctrl-0 = <&pp3000_en>; + + enable-active-high; + gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + vin-supply = <&ppvar_sys>; + }; + + ppvar_centerlogic_pwm: ppvar-centerlogic-pwm { + compatible = "pwm-regulator"; + regulator-name = "ppvar_centerlogic_pwm"; + + pwms = <&pwm3 0 3337 0>; + pwm-supply = <&ppvar_sys>; + pwm-dutycycle-range = <100 0>; + pwm-dutycycle-unit = <100>; + + /* EC turns on w/ ppvar_centerlogic_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <799434>; + regulator-max-microvolt = <1049925>; + }; + + ppvar_centerlogic: ppvar-centerlogic { + compatible = "vctrl-regulator"; + regulator-name = "ppvar_centerlogic"; + + regulator-min-microvolt = <799434>; + regulator-max-microvolt = <1049925>; + + ctrl-supply = <&ppvar_centerlogic_pwm>; + ctrl-voltage-range = <799434 1049925>; + + regulator-settling-time-up-us = <378>; + min-slew-down-rate = <225>; + ovp-threshold-percent = <16>; + }; + + /* Schematics call this PPVAR even though it's fixed */ + ppvar_logic: ppvar-logic { + compatible = "regulator-fixed"; + regulator-name = "ppvar_logic"; + + /* EC turns on w/ ppvar_logic_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + vin-supply = <&ppvar_sys>; + }; + + pp1800_audio: pp1800-audio { + compatible = "regulator-fixed"; + regulator-name = "pp1800_audio"; + pinctrl-names = "default"; + pinctrl-0 = <&pp1800_audio_en>; + + enable-active-high; + gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&pp1800>; + }; + + /* gpio is shared with pp3300_wifi_bt */ + pp1800_pcie: pp1800-pcie { + compatible = "regulator-fixed"; + regulator-name = "pp1800_pcie"; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_module_pd_l>; + + enable-active-high; + gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; + + /* + * Need to wait 1ms + ramp-up time before we can power on WiFi. + * This has been approximated as 8ms total. + */ + regulator-enable-ramp-delay = <8000>; + + vin-supply = <&pp1800>; + }; + + /* Always on; plain and simple */ + pp3000_ap: pp3000_emmc: pp3000 { + }; + + pp1500_ap_io: pp1500-ap-io { + compatible = "regulator-fixed"; + regulator-name = "pp1500_ap_io"; + pinctrl-names = "default"; + pinctrl-0 = <&pp1500_en>; + + enable-active-high; + gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + + vin-supply = <&pp1800>; + }; + + pp3300_disp: pp3300-disp { + compatible = "regulator-fixed"; + regulator-name = "pp3300_disp"; + pinctrl-names = "default"; + pinctrl-0 = <&pp3300_disp_en>; + + enable-active-high; + gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>; + + startup-delay-us = <2000>; + vin-supply = <&pp3300>; + }; + + /* EC turns on w/ pp3300_usb_en_l */ + pp3300_usb: pp3300 { + }; + + /* gpio is shared with pp1800_pcie and pinctrl is set there */ + pp3300_wifi_bt: pp3300-wifi-bt { + compatible = "regulator-fixed"; + regulator-name = "pp3300_wifi_bt"; + + enable-active-high; + gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; + + vin-supply = <&pp3300>; + }; + + /* + * This is a bit of a hack. The WiFi module should be reset at least + * 1ms after its regulators have ramped up (max rampup time is ~7ms). + * With some stretching of the imagination, we can call the 1.8V + * regulator a supply. + */ + wlan_pd_n: wlan-pd-n { + compatible = "regulator-fixed"; + regulator-name = "wlan_pd_n"; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_module_reset_l>; + + enable-active-high; + gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; + + vin-supply = <&pp1800_pcie>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 + 17 18 19 20 21 22 23 24 25 26 27 28 29 30 + 31 32 33 34 35 36 37 38 39 40 41 42 43 44 + 45 46 47 48 49 50 51 52 53 54 55 56 57 58 + 59 60 61 62 63 64 65 66 67 68 69 70 71 72 + 73 74 75 76 77 78 79 80 81 82 83 84 85 86 + 87 88 89 90 91 92 93 94 95 96 97 98 99 100>; + default-brightness-level = <51>; + enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; + power-supply = <&pp3300_disp>; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en>; + pwm-delay-us = <10000>; + }; +}; + +&ppvar_bigcpu { + min-slew-down-rate = <225>; + ovp-threshold-percent = <16>; +}; + +&ppvar_litcpu { + min-slew-down-rate = <225>; + ovp-threshold-percent = <16>; +}; + +&ppvar_gpu { + min-slew-down-rate = <225>; + ovp-threshold-percent = <16>; +}; + +&cdn_dp { + extcon = <&usbc_extcon0>, <&usbc_extcon1>; +}; + +&edp { + status = "okay"; + + ports { + edp_out: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + edp_out_panel: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_in_edp>; + }; + }; + }; +}; + +ap_i2c_mic: &i2c1 { + status = "okay"; + + clock-frequency = <400000>; + + /* These are relatively safe rise/fall times */ + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; + + headsetcodec: rt5514@57 { + compatible = "realtek,rt5514"; + reg = <0x57>; + realtek,dmic-init-delay-ms = <20>; + }; +}; + +ap_i2c_tp: &i2c5 { + status = "okay"; + + clock-frequency = <400000>; + + /* These are relatively safe rise/fall times */ + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; + + /* + * Note strange pullup enable. Apparently this avoids leakage but + * still allows us to get nice 4.7K pullups for high speed i2c + * transfers. Basically we want the pullup on whenever the ap is + * alive, so the "en" pin just gets set to output high. + */ + pinctrl-0 = <&i2c5_xfer &ap_i2c_tp_pu_en>; +}; + +&cros_ec { + cros_ec_pwm: ec-pwm { + compatible = "google,cros-ec-pwm"; + #pwm-cells = <1>; + }; + + usbc_extcon1: extcon@1 { + compatible = "google,extcon-usbc-cros-ec"; + google,usb-port-id = <1>; + + #extcon-cells = <0>; + }; +}; + +&sound { + rockchip,codec = <&max98357a &headsetcodec + &codec &wacky_spi_audio &cdn_dp>; +}; + +&spi2 { + wacky_spi_audio: spi2@0 { + compatible = "realtek,rt5514"; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mic_int>; + /* May run faster once verified. */ + spi-max-frequency = <10000000>; + wakeup-source; + }; +}; + +&pci_rootport { + mvl_wifi: wifi@0,0 { + compatible = "pci1b4b,2b42"; + reg = <0x83010000 0x0 0x00000000 0x0 0x00100000 + 0x83010000 0x0 0x00100000 0x0 0x00100000>; + interrupt-parent = <&gpio0>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_host_wake_l>; + wakeup-source; + }; +}; + +&tcphy1 { + status = "okay"; + extcon = <&usbc_extcon1>; +}; + +&u2phy1 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_1 { + status = "okay"; + extcon = <&usbc_extcon1>; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&pinctrl { + discrete-regulators { + pp1500_en: pp1500-en { + rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO + &pcfg_pull_none>; + }; + + pp1800_audio_en: pp1800-audio-en { + rockchip,pins = <RK_GPIO0 2 RK_FUNC_GPIO + &pcfg_pull_down>; + }; + + pp3000_en: pp3000-en { + rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO + &pcfg_pull_none>; + }; + + pp3300_disp_en: pp3300-disp-en { + rockchip,pins = <RK_GPIO4 27 RK_FUNC_GPIO + &pcfg_pull_none>; + }; + + wlan_module_pd_l: wlan-module-pd-l { + rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO + &pcfg_pull_down>; + }; + }; +}; + +&wifi { + wifi_perst_l: wifi-perst-l { + rockchip,pins = <2 27 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wlan_host_wake_l: wlan-host-wake-l { + rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_none>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts index 82179125bfb7..2cc7c47d6a85 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts @@ -1,49 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Gru-Kevin Rev 6+ board device tree source * * Copyright 2016-2017 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -#include "rk3399-gru.dtsi" +#include "rk3399-gru-chromebook.dtsi" #include <dt-bindings/input/linux-event-codes.h> /* @@ -75,24 +38,6 @@ vin-supply = <&pp3300>; }; - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&cros_ec_pwm 1>; - brightness-levels = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 - 17 18 19 20 21 22 23 24 25 26 27 28 29 30 - 31 32 33 34 35 36 37 38 39 40 41 42 43 44 - 45 46 47 48 49 50 51 52 53 54 55 56 57 58 - 59 60 61 62 63 64 65 66 67 68 69 70 71 72 - 73 74 75 76 77 78 79 80 81 82 83 84 85 86 - 87 88 89 90 91 92 93 94 95 96 97 98 99 100>; - default-brightness-level = <51>; - enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; - power-supply = <&pp3300_disp>; - pinctrl-names = "default"; - pinctrl-0 = <&bl_en>; - pwm-delay-us = <10000>; - }; - edp_panel: edp-panel { compatible = "sharp,lq123p1jx31", "simple-panel"; backlight = <&backlight>; @@ -124,6 +69,10 @@ }; }; +&backlight { + pwms = <&cros_ec_pwm 1>; +}; + &gpio_keys { pinctrl-names = "default"; pinctrl-0 = <&bt_host_wake_l>, <&cpu1_pen_eject>; @@ -280,23 +229,6 @@ ap_i2c_dig: &i2c2 { }; }; -&edp { - status = "okay"; - - ports { - edp_out: port@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - edp_out_panel: endpoint@0 { - reg = <0>; - remote-endpoint = <&panel_in_edp>; - }; - }; - }; -}; - &ppvar_bigcpu_pwm { regulator-min-microvolt = <798674>; regulator-max-microvolt = <1302172>; @@ -374,10 +306,4 @@ ap_i2c_dig: &i2c2 { rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_pull_up>; }; }; - - wifi { - wlan_host_wake_l: wlan-host-wake-l { - rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi index f49bfab75dd0..ca07f6032200 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Gru (and derivatives) board device tree source * * Copyright 2016-2017 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/input/input.h> @@ -82,19 +45,6 @@ regulator-boot-on; }; - pp900_ap: pp900-ap { - compatible = "regulator-fixed"; - regulator-name = "pp900_ap"; - - /* EC turns on w/ pp900_ap_en; always on for AP */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - vin-supply = <&ppvar_sys>; - }; - pp1200_lpddr: pp1200-lpddr { compatible = "regulator-fixed"; regulator-name = "pp1200_lpddr"; @@ -121,23 +71,6 @@ vin-supply = <&ppvar_sys>; }; - pp3000: pp3000 { - compatible = "regulator-fixed"; - regulator-name = "pp3000"; - pinctrl-names = "default"; - pinctrl-0 = <&pp3000_en>; - - enable-active-high; - gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; - - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - - vin-supply = <&ppvar_sys>; - }; - pp3300: pp3300 { compatible = "regulator-fixed"; regulator-name = "pp3300"; @@ -191,8 +124,6 @@ ctrl-voltage-range = <800107 1302232>; regulator-settling-time-up-us = <322>; - min-slew-down-rate = <225>; - ovp-threshold-percent = <16>; }; ppvar_litcpu_pwm: ppvar-litcpu-pwm { @@ -222,8 +153,6 @@ ctrl-voltage-range = <797743 1307837>; regulator-settling-time-up-us = <384>; - min-slew-down-rate = <225>; - ovp-threshold-percent = <16>; }; ppvar_gpu_pwm: ppvar-gpu-pwm { @@ -253,63 +182,12 @@ ctrl-voltage-range = <786384 1217747>; regulator-settling-time-up-us = <390>; - min-slew-down-rate = <225>; - ovp-threshold-percent = <16>; - }; - - ppvar_centerlogic_pwm: ppvar-centerlogic-pwm { - compatible = "pwm-regulator"; - regulator-name = "ppvar_centerlogic_pwm"; - - pwms = <&pwm3 0 3337 0>; - pwm-supply = <&ppvar_sys>; - pwm-dutycycle-range = <100 0>; - pwm-dutycycle-unit = <100>; - - /* EC turns on w/ ppvar_centerlogic_en; always on for AP */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <799434>; - regulator-max-microvolt = <1049925>; - }; - - ppvar_centerlogic: ppvar-centerlogic { - compatible = "vctrl-regulator"; - regulator-name = "ppvar_centerlogic"; - - regulator-min-microvolt = <799434>; - regulator-max-microvolt = <1049925>; - - ctrl-supply = <&ppvar_centerlogic_pwm>; - ctrl-voltage-range = <799434 1049925>; - - regulator-settling-time-up-us = <378>; - min-slew-down-rate = <225>; - ovp-threshold-percent = <16>; - }; - - /* Schematics call this PPVAR even though it's fixed */ - ppvar_logic: ppvar-logic { - compatible = "regulator-fixed"; - regulator-name = "ppvar_logic"; - - /* EC turns on w/ ppvar_logic_en; always on for AP */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - vin-supply = <&ppvar_sys>; }; /* EC turns on w/ pp900_ddrpll_en */ pp900_ddrpll: pp900-ap { }; - /* EC turns on w/ pp900_pcie_en */ - pp900_pcie: pp900-ap { - }; - /* EC turns on w/ pp900_pll_en */ pp900_pll: pp900-ap { }; @@ -318,10 +196,6 @@ pp900_pmu: pp900-ap { }; - /* EC turns on w/ pp900_usb_en */ - pp900_usb: pp900-ap { - }; - /* EC turns on w/ pp1800_s0_en_l */ pp1800_ap_io: pp1800_emmc: pp1800_nfc: pp1800_s0: pp1800 { }; @@ -346,79 +220,6 @@ pp1800_usb: pp1800 { }; - pp1500_ap_io: pp1500-ap-io { - compatible = "regulator-fixed"; - regulator-name = "pp1500_ap_io"; - pinctrl-names = "default"; - pinctrl-0 = <&pp1500_en>; - - enable-active-high; - gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>; - - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - - vin-supply = <&pp1800>; - }; - - pp1800_audio: pp1800-audio { - compatible = "regulator-fixed"; - regulator-name = "pp1800_audio"; - pinctrl-names = "default"; - pinctrl-0 = <&pp1800_audio_en>; - - enable-active-high; - gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>; - - regulator-always-on; - regulator-boot-on; - - vin-supply = <&pp1800>; - }; - - /* gpio is shared with pp3300_wifi_bt */ - pp1800_pcie: pp1800-pcie { - compatible = "regulator-fixed"; - regulator-name = "pp1800_pcie"; - pinctrl-names = "default"; - pinctrl-0 = <&wlan_module_pd_l>; - - enable-active-high; - gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; - - /* - * Need to wait 1ms + ramp-up time before we can power on WiFi. - * This has been approximated as 8ms total. - */ - regulator-enable-ramp-delay = <8000>; - - vin-supply = <&pp1800>; - }; - - /* - * This is a bit of a hack. The WiFi module should be reset at least - * 1ms after its regulators have ramped up (max rampup time is ~7ms). - * With some stretching of the imagination, we can call the 1.8V - * regulator a supply. - */ - wlan_pd_n: wlan-pd-n { - compatible = "regulator-fixed"; - regulator-name = "wlan_pd_n"; - pinctrl-names = "default"; - pinctrl-0 = <&wlan_module_reset_l>; - - enable-active-high; - gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; - - vin-supply = <&pp1800_pcie>; - }; - - /* Always on; plain and simple */ - pp3000_ap: pp3000_emmc: pp3000 { - }; - pp3000_sd_slot: pp3000-sd-slot { compatible = "regulator-fixed"; regulator-name = "pp3000_sd_slot"; @@ -457,34 +258,6 @@ pp3300_trackpad: pp3300-trackpad { }; - /* EC turns on w/ pp3300_usb_en_l */ - pp3300_usb: pp3300 { - }; - - pp3300_disp: pp3300-disp { - compatible = "regulator-fixed"; - regulator-name = "pp3300_disp"; - pinctrl-names = "default"; - pinctrl-0 = <&pp3300_disp_en>; - - enable-active-high; - gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>; - - startup-delay-us = <2000>; - vin-supply = <&pp3300>; - }; - - /* gpio is shared with pp1800_pcie and pinctrl is set there */ - pp3300_wifi_bt: pp3300-wifi-bt { - compatible = "regulator-fixed"; - regulator-name = "pp3300_wifi_bt"; - - enable-active-high; - gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; - - vin-supply = <&pp3300>; - }; - /* EC turns on w/ usb_a_en */ pp5000_usb_a_vbus: pp5000 { }; @@ -494,7 +267,7 @@ pinctrl-names = "default"; pinctrl-0 = <&bt_host_wake_l>; - wake-on-bt { + wake_on_bt: wake-on-bt { label = "Wake-on-Bluetooth"; gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_WAKEUP>; @@ -512,17 +285,14 @@ status = "okay"; }; - sound { + sound: sound { compatible = "rockchip,rk3399-gru-sound"; rockchip,cpu = <&i2s0 &i2s2>; - rockchip,codec = <&max98357a &headsetcodec - &codec &wacky_spi_audio &cdn_dp>; }; }; &cdn_dp { status = "okay"; - extcon = <&usbc_extcon0>, <&usbc_extcon1>; }; /* @@ -613,22 +383,6 @@ status = "okay"; }; -ap_i2c_mic: &i2c1 { - status = "okay"; - - clock-frequency = <400000>; - - /* These are relatively safe rise/fall times */ - i2c-scl-falling-time-ns = <50>; - i2c-scl-rising-time-ns = <300>; - - headsetcodec: rt5514@57 { - compatible = "realtek,rt5514"; - reg = <0x57>; - realtek,dmic-init-delay-ms = <20>; - }; -}; - ap_i2c_ts: &i2c3 { status = "okay"; @@ -639,24 +393,6 @@ ap_i2c_ts: &i2c3 { i2c-scl-rising-time-ns = <300>; }; -ap_i2c_tp: &i2c5 { - status = "okay"; - - clock-frequency = <400000>; - - /* These are relatively safe rise/fall times */ - i2c-scl-falling-time-ns = <50>; - i2c-scl-rising-time-ns = <300>; - - /* - * Note strange pullup enable. Apparently this avoids leakage but - * still allows us to get nice 4.7K pullups for high speed i2c - * transfers. Basically we want the pullup on whenever the ap is - * alive, so the "en" pin just gets set to output high. - */ - pinctrl-0 = <&i2c5_xfer &ap_i2c_tp_pu_en>; -}; - ap_i2c_audio: &i2c8 { status = "okay"; @@ -730,17 +466,6 @@ ap_i2c_audio: &i2c8 { #address-cells = <3>; #size-cells = <2>; ranges; - - mvl_wifi: wifi@0,0 { - compatible = "pci1b4b,2b42"; - reg = <0x83010000 0x0 0x00000000 0x0 0x00100000 - 0x83010000 0x0 0x00100000 0x0 0x00100000>; - interrupt-parent = <&gpio0>; - interrupts = <8 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&wlan_host_wake_l>; - wakeup-source; - }; }; }; @@ -830,18 +555,6 @@ ap_i2c_audio: &i2c8 { &spi2 { status = "okay"; - - wacky_spi_audio: spi2@0 { - compatible = "realtek,rt5514"; - reg = <0>; - interrupt-parent = <&gpio1>; - interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&mic_int>; - /* May run faster once verified. */ - spi-max-frequency = <10000000>; - wakeup-source; - }; }; &spi5 { @@ -863,24 +576,12 @@ ap_i2c_audio: &i2c8 { #size-cells = <0>; }; - cros_ec_pwm: ec-pwm { - compatible = "google,cros-ec-pwm"; - #pwm-cells = <1>; - }; - usbc_extcon0: extcon@0 { compatible = "google,extcon-usbc-cros-ec"; google,usb-port-id = <0>; #extcon-cells = <0>; }; - - usbc_extcon1: extcon@1 { - compatible = "google,extcon-usbc-cros-ec"; - google,usb-port-id = <1>; - - #extcon-cells = <0>; - }; }; }; @@ -896,19 +597,10 @@ ap_i2c_audio: &i2c8 { extcon = <&usbc_extcon0>; }; -&tcphy1 { - status = "okay"; - extcon = <&usbc_extcon1>; -}; - &u2phy0 { status = "okay"; }; -&u2phy1 { - status = "okay"; -}; - &u2phy0_host { status = "okay"; }; @@ -929,22 +621,10 @@ ap_i2c_audio: &i2c8 { status = "okay"; }; -&usb_host0_ehci { - status = "okay"; -}; - &usb_host0_ohci { status = "okay"; }; -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - &usbdrd3_0 { status = "okay"; extcon = <&usbc_extcon0>; @@ -955,16 +635,6 @@ ap_i2c_audio: &i2c8 { dr_mode = "host"; }; -&usbdrd3_1 { - status = "okay"; - extcon = <&usbc_extcon1>; -}; - -&usbdrd_dwc3_1 { - status = "okay"; - dr_mode = "host"; -}; - &vopb { status = "okay"; }; @@ -1023,26 +693,6 @@ ap_i2c_audio: &i2c8 { }; discrete-regulators { - pp1500_en: pp1500-en { - rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO - &pcfg_pull_none>; - }; - - pp1800_audio_en: pp1800-audio-en { - rockchip,pins = <RK_GPIO0 2 RK_FUNC_GPIO - &pcfg_pull_down>; - }; - - pp3300_disp_en: pp3300-disp-en { - rockchip,pins = <RK_GPIO4 27 RK_FUNC_GPIO - &pcfg_pull_none>; - }; - - pp3000_en: pp3000-en { - rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO - &pcfg_pull_none>; - }; - sd_io_pwr_en: sd-io-pwr-en { rockchip,pins = <RK_GPIO2 2 RK_FUNC_GPIO &pcfg_pull_none>; @@ -1057,11 +707,6 @@ ap_i2c_audio: &i2c8 { rockchip,pins = <RK_GPIO4 29 RK_FUNC_GPIO &pcfg_pull_none>; }; - - wlan_module_pd_l: wlan-module-pd-l { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO - &pcfg_pull_down>; - }; }; codec { @@ -1168,11 +813,7 @@ ap_i2c_audio: &i2c8 { }; }; - wifi { - wifi_perst_l: wifi-perst-l { - rockchip,pins = <2 27 RK_FUNC_GPIO &pcfg_pull_none>; - }; - + wifi: wifi { wlan_module_reset_l: wlan-module-reset-l { rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_pull_none>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi index d8a120f945c8..69cc9b05baa5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ / { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi index 81617bcf2522..d6f1095abb04 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ / { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts index e0afdd8b62bd..e0d64f862322 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 14a0f1998639..0130b9f98c9d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/pwm/pwm.h> @@ -439,7 +402,6 @@ pinctrl-0 = <&i2s0_2ch_bus>; rockchip,playback-channels = <2>; rockchip,capture-channels = <2>; - #sound-dai-cells = <0>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts index ad7548d3b93d..fef2c0608999 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -186,7 +149,6 @@ &i2s0 { rockchip,playback-channels = <8>; rockchip,capture-channels = <8>; - #sound-dai-cells = <0>; status = "okay"; }; @@ -235,6 +197,5 @@ &spdif { i2c-scl-rising-time-ns = <450>; i2c-scl-falling-time-ns = <15>; - #sound-dai-cells = <0>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi index 941b627094d7..36b60791c156 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "dt-bindings/pwm/pwm.h" @@ -227,6 +190,10 @@ status = "okay"; }; +&hdmi_sound { + status = "okay"; +}; + &i2c0 { clock-frequency = <400000>; i2c-scl-rising-time-ns = <168>; @@ -458,7 +425,6 @@ }; &i2s2 { - #sound-dai-cells = <0>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index e0040b648f43..87350c694b38 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/clock/rk3399-cru.h> @@ -108,8 +71,8 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x0>; enable-method = "psci"; - #cooling-cells = <2>; /* min followed by max */ clocks = <&cru ARMCLKL>; + #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <100>; }; @@ -119,6 +82,7 @@ reg = <0x0 0x1>; enable-method = "psci"; clocks = <&cru ARMCLKL>; + #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <100>; }; @@ -128,6 +92,7 @@ reg = <0x0 0x2>; enable-method = "psci"; clocks = <&cru ARMCLKL>; + #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <100>; }; @@ -137,6 +102,7 @@ reg = <0x0 0x3>; enable-method = "psci"; clocks = <&cru ARMCLKL>; + #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <100>; }; @@ -145,8 +111,8 @@ compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x0 0x100>; enable-method = "psci"; - #cooling-cells = <2>; /* min followed by max */ clocks = <&cru ARMCLKB>; + #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <436>; }; @@ -156,6 +122,7 @@ reg = <0x0 0x101>; enable-method = "psci"; clocks = <&cru ARMCLKB>; + #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <436>; }; }; @@ -1516,6 +1483,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spdif_bus>; power-domains = <&power RK3399_PD_SDIOAUDIO>; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -1531,6 +1499,7 @@ pinctrl-names = "default"; pinctrl-0 = <&i2s0_8ch_bus>; power-domains = <&power RK3399_PD_SDIOAUDIO>; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -1545,6 +1514,7 @@ pinctrl-names = "default"; pinctrl-0 = <&i2s1_2ch_bus>; power-domains = <&power RK3399_PD_SDIOAUDIO>; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -1557,6 +1527,7 @@ clock-names = "i2s_clk", "i2s_hclk"; clocks = <&cru SCLK_I2S2_8CH>, <&cru HCLK_I2S2_8CH>; power-domains = <&power RK3399_PD_SDIOAUDIO>; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -1698,6 +1669,21 @@ status = "disabled"; }; + hdmi_sound: hdmi-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,name = "hdmi-sound"; + status = "disabled"; + + simple-audio-card,cpu { + sound-dai = <&i2s2>; + }; + simple-audio-card,codec { + sound-dai = <&hdmi>; + }; + }; + hdmi: hdmi@ff940000 { compatible = "rockchip,rk3399-dw-hdmi"; reg = <0x0 0xff940000 0x0 0x20000>; @@ -1711,6 +1697,7 @@ power-domains = <&power RK3399_PD_HDCP>; reg-io-width = <4>; rockchip,grf = <&grf>; + #sound-dai-cells = <0>; status = "disabled"; ports { @@ -1936,19 +1923,49 @@ drive-strength = <12>; }; + pcfg_pull_none_13ma: pcfg-pull-none-13ma { + bias-disable; + drive-strength = <13>; + }; + + pcfg_pull_none_18ma: pcfg-pull-none-18ma { + bias-disable; + drive-strength = <18>; + }; + + pcfg_pull_none_20ma: pcfg-pull-none-20ma { + bias-disable; + drive-strength = <20>; + }; + + pcfg_pull_up_2ma: pcfg-pull-up-2ma { + bias-pull-up; + drive-strength = <2>; + }; + pcfg_pull_up_8ma: pcfg-pull-up-8ma { bias-pull-up; drive-strength = <8>; }; + pcfg_pull_up_18ma: pcfg-pull-up-18ma { + bias-pull-up; + drive-strength = <18>; + }; + + pcfg_pull_up_20ma: pcfg-pull-up-20ma { + bias-pull-up; + drive-strength = <20>; + }; + pcfg_pull_down_4ma: pcfg-pull-down-4ma { bias-pull-down; drive-strength = <4>; }; - pcfg_pull_up_2ma: pcfg-pull-up-2ma { - bias-pull-up; - drive-strength = <2>; + pcfg_pull_down_8ma: pcfg-pull-down-8ma { + bias-pull-down; + drive-strength = <8>; }; pcfg_pull_down_12ma: pcfg-pull-down-12ma { @@ -1956,9 +1973,22 @@ drive-strength = <12>; }; - pcfg_pull_none_13ma: pcfg-pull-none-13ma { - bias-disable; - drive-strength = <13>; + pcfg_pull_down_18ma: pcfg-pull-down-18ma { + bias-pull-down; + drive-strength = <18>; + }; + + pcfg_pull_down_20ma: pcfg-pull-down-20ma { + bias-pull-down; + drive-strength = <20>; + }; + + pcfg_output_high: pcfg-output-high { + output-high; + }; + + pcfg_output_low: pcfg-output-low { + output-low; }; clock { @@ -2481,45 +2511,60 @@ pwm0 { pwm0_pin: pwm0-pin { rockchip,pins = - <4 18 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PC2 RK_FUNC_1 &pcfg_pull_none>; + }; + + pwm0_pin_pull_down: pwm0-pin-pull-down { + rockchip,pins = + <4 RK_PC2 RK_FUNC_1 &pcfg_pull_down>; }; vop0_pwm_pin: vop0-pwm-pin { rockchip,pins = - <4 18 RK_FUNC_2 &pcfg_pull_none>; + <4 RK_PC2 RK_FUNC_2 &pcfg_pull_none>; + }; + + vop1_pwm_pin: vop1-pwm-pin { + rockchip,pins = + <4 RK_PC2 RK_FUNC_3 &pcfg_pull_none>; }; }; pwm1 { pwm1_pin: pwm1-pin { rockchip,pins = - <4 22 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PC6 RK_FUNC_1 &pcfg_pull_none>; }; - vop1_pwm_pin: vop1-pwm-pin { + pwm1_pin_pull_down: pwm1-pin-pull-down { rockchip,pins = - <4 18 RK_FUNC_3 &pcfg_pull_none>; + <4 RK_PC6 RK_FUNC_1 &pcfg_pull_down>; }; }; pwm2 { pwm2_pin: pwm2-pin { rockchip,pins = - <1 19 RK_FUNC_1 &pcfg_pull_none>; + <1 RK_PC3 RK_FUNC_1 &pcfg_pull_none>; + }; + + pwm2_pin_pull_down: pwm2-pin-pull-down { + rockchip,pins = + <1 RK_PC3 RK_FUNC_1 &pcfg_pull_down>; }; }; pwm3a { pwm3a_pin: pwm3a-pin { rockchip,pins = - <0 6 RK_FUNC_1 &pcfg_pull_none>; + <0 RK_PA6 RK_FUNC_1 &pcfg_pull_none>; }; }; pwm3b { pwm3b_pin: pwm3b-pin { rockchip,pins = - <1 14 RK_FUNC_1 &pcfg_pull_none>; + <1 RK_PB6 RK_FUNC_1 &pcfg_pull_none>; }; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts index 9b4dc41703e3..7968d524351b 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts @@ -54,12 +54,13 @@ sound { compatible = "audio-graph-card"; label = "UniPhier LD11"; - widgets = "Headphone", "Headphone Jack"; + widgets = "Headphone", "Headphones"; dais = <&i2s_port2 &i2s_port3 &i2s_port4 &spdif_port0 &comp_spdif_port0>; + hp-det-gpio = <&gpio UNIPHIER_GPIO_IRQ(0) GPIO_ACTIVE_LOW>; }; spdif-out { diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts index fe6608ea3277..1a5e7c24b901 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts @@ -54,12 +54,13 @@ sound { compatible = "audio-graph-card"; label = "UniPhier LD20"; - widgets = "Headphone", "Headphone Jack"; + widgets = "Headphone", "Headphones"; dais = <&i2s_port2 &i2s_port3 &i2s_port4 &spdif_port0 &comp_spdif_port0>; + hp-det-gpio = <&gpio UNIPHIER_GPIO_IRQ(0) GPIO_ACTIVE_LOW>; }; spdif-out { diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index 0298bd0d0e1a..caf112629caa 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -58,6 +58,7 @@ clocks = <&sys_clk 32>; enable-method = "psci"; operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; }; cpu2: cpu@100 { @@ -77,6 +78,7 @@ clocks = <&sys_clk 33>; enable-method = "psci"; operating-points-v2 = <&cluster1_opp>; + #cooling-cells = <2>; }; }; diff --git a/arch/arm64/boot/dts/sprd/sc2731.dtsi b/arch/arm64/boot/dts/sprd/sc2731.dtsi index 98d3b4fdb9ad..82bd642d770b 100644 --- a/arch/arm64/boot/dts/sprd/sc2731.dtsi +++ b/arch/arm64/boot/dts/sprd/sc2731.dtsi @@ -17,6 +17,28 @@ #address-cells = <1>; #size-cells = <0>; + led-controller@200 { + compatible = "sprd,sc27xx-bltc", "sprd,sc2731-bltc"; + reg = <0x200>; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + label = "red"; + reg = <0x0>; + }; + + led@1 { + label = "green"; + reg = <0x1>; + }; + + led@2 { + label = "blue"; + reg = <0x2>; + }; + }; + rtc@280 { compatible = "sprd,sc27xx-rtc", "sprd,sc2731-rtc"; reg = <0x280>; @@ -35,6 +57,28 @@ #interrupt-cells = <2>; }; + efuse@380 { + compatible = "sprd,sc27xx-efuse", "sprd,sc2731-efuse"; + reg = <0x380>; + #address-cells = <1>; + #size-cells = <1>; + hwlocks = <&hwlock 12>; + }; + + pmic_adc: adc@480 { + compatible = "sprd,sc27xx-adc", "sprd,sc2731-adc"; + reg = <0x480>; + interrupt-parent = <&sc2731_pmic>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + hwlocks = <&hwlock 4>; + }; + + vibrator@ec8 { + compatible = "sprd,sc27xx-vibrator", "sprd,sc2731-vibrator"; + reg = <0xec8>; + }; + regulators { compatible = "sprd,sc27xx-regulator"; diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi index e9db9108f3c0..eb6be5675f79 100644 --- a/arch/arm64/boot/dts/sprd/whale2.dtsi +++ b/arch/arm64/boot/dts/sprd/whale2.dtsi @@ -146,6 +146,12 @@ clocks = <&ext_32k>; }; + timer@40050020 { + compatible = "sprd,sc9860-suspend-timer"; + reg = <0 0x40050020 0 0x20>; + clocks = <&ext_32k>; + }; + hwlock: hwspinlock@40500000 { compatible = "sprd,hwspinlock-r3p0"; reg = <0 0x40500000 0 0x1000>; diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile new file mode 100644 index 000000000000..63e619d0b5b8 --- /dev/null +++ b/arch/arm64/boot/dts/ti/Makefile @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Make file to build device tree binaries for boards based on +# Texas Instruments Inc processors +# +# Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ +# + +dtb-$(CONFIG_ARCH_K3_AM6_SOC) += k3-am654-base-board.dtb diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi new file mode 100644 index 000000000000..2409344df4fa --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM6 SoC Family Main Domain peripherals + * + * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ + */ + +&cbass_main { + gic500: interrupt-controller@1800000 { + compatible = "arm,gic-v3"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x01800000 0x10000>, /* GICD */ + <0x01880000 0x90000>; /* GICR */ + /* + * vcpumntirq: + * virtual CPU interface maintenance interrupt + */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + gic_its: gic-its@18200000 { + compatible = "arm,gic-v3-its"; + reg = <0x01820000 0x10000>; + msi-controller; + #msi-cells = <1>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi new file mode 100644 index 000000000000..cede1fa0983c --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM6 SoC Family + * + * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "Texas Instruments K3 AM654 SoC"; + compatible = "ti,am654"; + interrupt-parent = <&gic500>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + + psci: psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + }; + + a53_timer0: timer-cl0-cpu0 { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */ + }; + + pmu: pmu { + compatible = "arm,armv8-pmuv3"; + /* Recommendation from GIC500 TRM Table A.3 */ + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + cbass_main: interconnect@100000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00100000 0x00 0x00100000 0x00020000>, /* ctrl mmr */ + <0x00600000 0x00 0x00600000 0x00001100>, /* GPIO */ + <0x00900000 0x00 0x00900000 0x00012000>, /* serdes */ + <0x01000000 0x00 0x01000000 0x0af02400>, /* Most peripherals */ + <0x30800000 0x00 0x30800000 0x0bc00000>, /* MAIN NAVSS */ + /* MCUSS Range */ + <0x28380000 0x00 0x28380000 0x03880000>, + <0x40200000 0x00 0x40200000 0x00900100>, + <0x42040000 0x00 0x42040000 0x03ac2400>, + <0x45100000 0x00 0x45100000 0x00c24000>, + <0x46000000 0x00 0x46000000 0x00200000>, + <0x47000000 0x00 0x47000000 0x00068400>; + + cbass_mcu: interconnect@28380000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x28380000 0x28380000 0x03880000>, /* MCU NAVSS*/ + <0x40200000 0x40200000 0x00900100>, /* First peripheral window */ + <0x42040000 0x42040000 0x03ac2400>, /* WKUP */ + <0x45100000 0x45100000 0x00c24000>, /* MMRs, remaining NAVSS */ + <0x46000000 0x46000000 0x00200000>, /* CPSW */ + <0x47000000 0x47000000 0x00068400>; /* OSPI space 1 */ + + cbass_wakeup: interconnect@42040000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + /* WKUP Basic peripherals */ + ranges = <0x42040000 0x42040000 0x03ac2400>; + }; + }; + }; +}; + +/* Now include the peripherals for each bus segments */ +#include "k3-am65-main.dtsi" diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts new file mode 100644 index 000000000000..af6956fdc13f --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ + */ + +/dts-v1/; + +#include "k3-am654.dtsi" + +/ { + compatible = "ti,am654-evm", "ti,am654"; + model = "Texas Instruments AM654 Base Board"; + + chosen { + stdout-path = "serial2:115200n8"; + bootargs = "earlycon=ns16550a,mmio32,0x02800000"; + }; + + memory@80000000 { + device_type = "memory"; + /* 4G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000000 0x80000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + secure_ddr: secure_ddr@9e800000 { + reg = <0 0x9e800000 0 0x01800000>; /* for OP-TEE */ + alignment = <0x1000>; + no-map; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am654.dtsi b/arch/arm64/boot/dts/ti/k3-am654.dtsi new file mode 100644 index 000000000000..2affa6f6617e --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am654.dtsi @@ -0,0 +1,115 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM6 SoC family in Quad core configuration + * + * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#include "k3-am65.dtsi" + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu-map { + cluster0: cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + }; + + cluster1: cluster1 { + core0 { + cpu = <&cpu2>; + }; + + core1 { + cpu = <&cpu3>; + }; + }; + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x000>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x001>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + + cpu2: cpu@100 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x100>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_1>; + }; + + cpu3: cpu@101 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x101>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_1>; + }; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; + next-level-cache = <&msmc_l3>; + }; + + L2_1: l2-cache1 { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; + next-level-cache = <&msmc_l3>; + }; + + msmc_l3: l3-cache0 { + compatible = "cache"; + cache-level = <3>; + }; +}; diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile index c2a0c00272e2..60f5443f3ef4 100644 --- a/arch/arm64/boot/dts/xilinx/Makefile +++ b/arch/arm64/boot/dts/xilinx/Makefile @@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 -dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-ep108.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += avnet-ultra96-rev1.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1232-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1254-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1275-revA.dtb diff --git a/arch/arm64/boot/dts/xilinx/avnet-ultra96-rev1.dts b/arch/arm64/boot/dts/xilinx/avnet-ultra96-rev1.dts new file mode 100644 index 000000000000..88aa06fa78a8 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/avnet-ultra96-rev1.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Avnet Ultra96 rev1 + * + * (C) Copyright 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp-zcu100-revC.dts" + +/ { + model = "Avnet Ultra96 Rev1"; + compatible = "avnet,ultra96-rev1", "avnet,ultra96", + "xlnx,zynqmp-zcu100-revC", "xlnx,zynqmp-zcu100", + "xlnx,zynqmp"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi deleted file mode 100644 index 9f5eedbc2139..000000000000 --- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi +++ /dev/null @@ -1,137 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * clock specification for Xilinx ZynqMP ep108 development board - * - * (C) Copyright 2015, Xilinx, Inc. - * - * Michal Simek <michal.simek@xilinx.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - */ - -/ { - misc_clk: misc_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - i2c_clk: i2c_clk { - compatible = "fixed-clock"; - #clock-cells = <0x0>; - clock-frequency = <111111111>; - }; - - sata_clk: sata_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <75000000>; - }; - - clk100: clk100 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; - }; - - clk600: clk600 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <600000000>; - }; -}; - -&can0 { - clocks = <&misc_clk &misc_clk>; -}; - -&can1 { - clocks = <&misc_clk &misc_clk>; -}; - -&fpd_dma_chan1 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan2 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan3 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan4 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan5 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan6 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan7 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan8 { - clocks = <&clk600>, <&clk100>; -}; - -&gem0 { - clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>; -}; - -&gpio { - clocks = <&misc_clk>; -}; - -&i2c0 { - clocks = <&i2c_clk>; -}; - -&i2c1 { - clocks = <&i2c_clk>; -}; - -&sata { - clocks = <&sata_clk>; -}; - -&sdhci0 { - clocks = <&misc_clk>, <&misc_clk>; -}; - -&sdhci1 { - clocks = <&misc_clk>, <&misc_clk>; -}; - -&spi0 { - clocks = <&misc_clk &misc_clk>; -}; - -&spi1 { - clocks = <&misc_clk &misc_clk>; -}; - -&uart0 { - clocks = <&misc_clk &misc_clk>; -}; - -&usb0 { - clocks = <&misc_clk>, <&misc_clk>; -}; - -&usb1 { - clocks = <&misc_clk>, <&misc_clk>; -}; - -&watchdog0 { - clocks= <&misc_clk>; -}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts deleted file mode 100644 index 4b0684911626..000000000000 --- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts +++ /dev/null @@ -1,154 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * dts file for Xilinx ZynqMP ep108 development board - * - * (C) Copyright 2014 - 2015, Xilinx, Inc. - * - * Michal Simek <michal.simek@xilinx.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - */ - -/dts-v1/; - -#include "zynqmp.dtsi" -#include "zynqmp-ep108-clk.dtsi" - -/ { - model = "ZynqMP EP108"; - - aliases { - mmc0 = &sdhci0; - mmc1 = &sdhci1; - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; -}; - -&can0 { - status = "okay"; -}; - -&can1 { - status = "okay"; -}; - -&gem0 { - status = "okay"; - phy-handle = <&phy0>; - phy-mode = "rgmii-id"; - phy0: phy@0 { - reg = <0>; - max-speed = <100>; - }; -}; - -&gpio { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - clock-frequency = <400000>; - eeprom@54 { - compatible = "atmel,24c64"; - reg = <0x54>; - }; -}; - -&i2c1 { - status = "okay"; - clock-frequency = <400000>; - eeprom@55 { - compatible = "atmel,24c64"; - reg = <0x55>; - }; -}; - -&sata { - status = "okay"; - ceva,broken-gen2; - /* SATA Phy OOB timing settings */ - ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>; - ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>; - ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>; - ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>; - ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>; - ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>; - ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>; - ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>; -}; - -&sdhci0 { - status = "okay"; - bus-width = <8>; -}; - -&sdhci1 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - num-cs = <1>; - spi0_flash0: spi0_flash0@0 { - compatible = "m25p80"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - - spi0_flash0@0 { - label = "spi0_flash0"; - reg = <0x0 0x100000>; - }; - }; -}; - -&spi1 { - status = "okay"; - num-cs = <1>; - spi1_flash0: spi1_flash0@0 { - compatible = "m25p80"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - - spi1_flash0@0 { - label = "spi1_flash0"; - reg = <0x0 0x100000>; - }; - }; -}; - -&uart0 { - status = "okay"; -}; - -&usb0 { - status = "okay"; - dr_mode = "peripheral"; - maximum-speed = "high-speed"; -}; - -&usb1 { - status = "okay"; - dr_mode = "host"; - maximum-speed = "high-speed"; -}; - -&watchdog0 { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts index 3e862a9faf26..eb5e8bddb610 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts @@ -44,8 +44,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; sw4 { label = "sw4"; @@ -89,12 +87,6 @@ gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - - bt_power { - label = "bt_power"; - gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; }; wmmcsdio_fixed: fixedregulator-mmcsdio { @@ -267,6 +259,10 @@ &uart0 { status = "okay"; + bluetooth { + compatible = "ti,wl1831-st"; + enable-gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; + }; }; &uart1 { diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts index 5b4ffe646a9b..25dd57485323 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts @@ -41,8 +41,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; sw19 { label = "sw19"; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts index 668f7f26716a..259f21b0c001 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts @@ -41,8 +41,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; sw19 { label = "sw19"; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts index 9a9dd6a0142b..a61b3cc6f4c9 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts @@ -41,8 +41,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; sw19 { label = "sw19"; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 3cfa8ca26738..f9a186f6af8a 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -47,6 +47,7 @@ CONFIG_ARCH_MVEBU=y CONFIG_ARCH_QCOM=y CONFIG_ARCH_ROCKCHIP=y CONFIG_ARCH_SEATTLE=y +CONFIG_ARCH_SYNQUACER=y CONFIG_ARCH_RENESAS=y CONFIG_ARCH_R8A7795=y CONFIG_ARCH_R8A7796=y @@ -58,7 +59,6 @@ CONFIG_ARCH_R8A77995=y CONFIG_ARCH_STRATIX10=y CONFIG_ARCH_TEGRA=y CONFIG_ARCH_SPRD=y -CONFIG_ARCH_SYNQUACER=y CONFIG_ARCH_THUNDER=y CONFIG_ARCH_THUNDER2=y CONFIG_ARCH_UNIPHIER=y @@ -67,25 +67,23 @@ CONFIG_ARCH_XGENE=y CONFIG_ARCH_ZX=y CONFIG_ARCH_ZYNQMP=y CONFIG_PCI=y -CONFIG_HOTPLUG_PCI_PCIE=y CONFIG_PCI_IOV=y CONFIG_HOTPLUG_PCI=y CONFIG_HOTPLUG_PCI_ACPI=y -CONFIG_PCI_LAYERSCAPE=y -CONFIG_PCI_HISI=y -CONFIG_PCIE_QCOM=y -CONFIG_PCIE_KIRIN=y -CONFIG_PCIE_ARMADA_8K=y -CONFIG_PCIE_HISI_STB=y CONFIG_PCI_AARDVARK=y CONFIG_PCI_TEGRA=y CONFIG_PCIE_RCAR=y -CONFIG_PCIE_ROCKCHIP=y -CONFIG_PCIE_ROCKCHIP_HOST=m CONFIG_PCI_HOST_GENERIC=y CONFIG_PCI_XGENE=y CONFIG_PCI_HOST_THUNDER_PEM=y CONFIG_PCI_HOST_THUNDER_ECAM=y +CONFIG_PCIE_ROCKCHIP_HOST=m +CONFIG_PCI_LAYERSCAPE=y +CONFIG_PCI_HISI=y +CONFIG_PCIE_QCOM=y +CONFIG_PCIE_ARMADA_8K=y +CONFIG_PCIE_KIRIN=y +CONFIG_PCIE_HISI_STB=y CONFIG_ARM64_VA_BITS_48=y CONFIG_SCHED_MC=y CONFIG_NUMA=y @@ -104,8 +102,6 @@ CONFIG_HIBERNATION=y CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y CONFIG_ARM_CPUIDLE=y CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_GOV_ATTR_SET=y -CONFIG_CPU_FREQ_GOV_COMMON=y CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=y @@ -113,11 +109,11 @@ CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y CONFIG_CPUFREQ_DT=y +CONFIG_ACPI_CPPC_CPUFREQ=m CONFIG_ARM_ARMADA_37XX_CPUFREQ=y CONFIG_ARM_BIG_LITTLE_CPUFREQ=y CONFIG_ARM_SCPI_CPUFREQ=y CONFIG_ARM_TEGRA186_CPUFREQ=y -CONFIG_ACPI_CPPC_CPUFREQ=m CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -236,11 +232,6 @@ CONFIG_SMSC911X=y CONFIG_SNI_AVE=y CONFIG_SNI_NETSEC=y CONFIG_STMMAC_ETH=m -CONFIG_DWMAC_IPQ806X=m -CONFIG_DWMAC_MESON=m -CONFIG_DWMAC_ROCKCHIP=m -CONFIG_DWMAC_SUNXI=m -CONFIG_DWMAC_SUN8I=m CONFIG_MDIO_BUS_MUX_MMIOREG=y CONFIG_AT803X_PHY=m CONFIG_MARVELL_PHY=m @@ -269,8 +260,8 @@ CONFIG_WL18XX=m CONFIG_WLCORE_SDIO=m CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_ADC=m -CONFIG_KEYBOARD_CROS_EC=y CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_CROS_EC=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=m CONFIG_INPUT_MISC=y @@ -296,17 +287,13 @@ CONFIG_SERIAL_SAMSUNG=y CONFIG_SERIAL_SAMSUNG_CONSOLE=y CONFIG_SERIAL_TEGRA=y CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=11 -CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_SERIAL_MSM=y CONFIG_SERIAL_MSM_CONSOLE=y CONFIG_SERIAL_XILINX_PS_UART=y CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y CONFIG_SERIAL_MVEBU_UART=y CONFIG_SERIAL_DEV_BUS=y -CONFIG_SERIAL_DEV_CTRL_TTYPORT=y CONFIG_VIRTIO_CONSOLE=y -CONFIG_I2C_HID=m CONFIG_I2C_CHARDEV=y CONFIG_I2C_MUX=y CONFIG_I2C_MUX_PCA954x=y @@ -325,26 +312,26 @@ CONFIG_I2C_RCAR=y CONFIG_I2C_CROS_EC_TUNNEL=y CONFIG_SPI=y CONFIG_SPI_ARMADA_3700=y -CONFIG_SPI_MESON_SPICC=m -CONFIG_SPI_MESON_SPIFC=m CONFIG_SPI_BCM2835=m CONFIG_SPI_BCM2835AUX=m +CONFIG_SPI_MESON_SPICC=m +CONFIG_SPI_MESON_SPIFC=m CONFIG_SPI_ORION=y CONFIG_SPI_PL022=y -CONFIG_SPI_QUP=y CONFIG_SPI_ROCKCHIP=y +CONFIG_SPI_QUP=y CONFIG_SPI_S3C64XX=y CONFIG_SPI_SPIDEV=m CONFIG_SPMI=y -CONFIG_PINCTRL_IPQ8074=y CONFIG_PINCTRL_SINGLE=y CONFIG_PINCTRL_MAX77620=y +CONFIG_PINCTRL_IPQ8074=y CONFIG_PINCTRL_MSM8916=y CONFIG_PINCTRL_MSM8994=y CONFIG_PINCTRL_MSM8996=y -CONFIG_PINCTRL_MT7622=y CONFIG_PINCTRL_QDF2XXX=y CONFIG_PINCTRL_QCOM_SPMI_PMIC=y +CONFIG_PINCTRL_MT7622=y CONFIG_GPIO_DWAPB=y CONFIG_GPIO_MB86S7X=y CONFIG_GPIO_PL061=y @@ -368,13 +355,13 @@ CONFIG_SENSORS_INA2XX=m CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y CONFIG_CPU_THERMAL=y CONFIG_THERMAL_EMULATION=y +CONFIG_ROCKCHIP_THERMAL=m +CONFIG_RCAR_GEN3_THERMAL=y CONFIG_ARMADA_THERMAL=y CONFIG_BRCMSTB_THERMAL=m CONFIG_EXYNOS_THERMAL=y -CONFIG_RCAR_GEN3_THERMAL=y -CONFIG_QCOM_TSENS=y -CONFIG_ROCKCHIP_THERMAL=m CONFIG_TEGRA_BPMP_THERMAL=m +CONFIG_QCOM_TSENS=y CONFIG_UNIPHIER_THERMAL=y CONFIG_WATCHDOG=y CONFIG_S3C2410_WATCHDOG=y @@ -395,9 +382,9 @@ CONFIG_MFD_MAX77620=y CONFIG_MFD_SPMI_PMIC=y CONFIG_MFD_RK808=y CONFIG_MFD_SEC_CORE=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_AXP20X=y CONFIG_REGULATOR_FAN53555=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_HI6421V530=y CONFIG_REGULATOR_HI655X=y @@ -407,16 +394,15 @@ CONFIG_REGULATOR_QCOM_SMD_RPM=y CONFIG_REGULATOR_QCOM_SPMI=y CONFIG_REGULATOR_RK808=y CONFIG_REGULATOR_S2MPS11=y +CONFIG_RC_CORE=m +CONFIG_RC_DECODERS=y +CONFIG_RC_DEVICES=y +CONFIG_IR_MESON=m CONFIG_MEDIA_SUPPORT=m CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_ANALOG_TV_SUPPORT=y CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y CONFIG_MEDIA_CONTROLLER=y -CONFIG_MEDIA_RC_SUPPORT=y -CONFIG_RC_CORE=m -CONFIG_RC_DEVICES=y -CONFIG_RC_DECODERS=y -CONFIG_IR_MESON=m CONFIG_VIDEO_V4L2_SUBDEV_API=y # CONFIG_DVB_NET is not set CONFIG_V4L_MEM2MEM_DRIVERS=y @@ -441,8 +427,7 @@ CONFIG_ROCKCHIP_DW_HDMI=y CONFIG_ROCKCHIP_DW_MIPI_DSI=y CONFIG_ROCKCHIP_INNO_HDMI=y CONFIG_DRM_RCAR_DU=m -CONFIG_DRM_RCAR_LVDS=y -CONFIG_DRM_RCAR_VSP=y +CONFIG_DRM_RCAR_LVDS=m CONFIG_DRM_TEGRA=m CONFIG_DRM_PANEL_SIMPLE=m CONFIG_DRM_I2C_ADV7511=m @@ -455,7 +440,6 @@ CONFIG_FB_ARMCLCD=y CONFIG_BACKLIGHT_GENERIC=m CONFIG_BACKLIGHT_PWM=m CONFIG_BACKLIGHT_LP855X=m -CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set @@ -468,6 +452,7 @@ CONFIG_SND_SOC_RCAR=m CONFIG_SND_SOC_AK4613=m CONFIG_SND_SIMPLE_CARD=m CONFIG_SND_AUDIO_GRAPH_CARD=m +CONFIG_I2C_HID=m CONFIG_USB=y CONFIG_USB_OTG=y CONFIG_USB_XHCI_HCD=y @@ -501,12 +486,12 @@ CONFIG_MMC_BLOCK_MINORS=32 CONFIG_MMC_ARMMMCI=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ACPI=y -CONFIG_MMC_SDHCI_F_SDH30=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_OF_ARASAN=y CONFIG_MMC_SDHCI_OF_ESDHC=y CONFIG_MMC_SDHCI_CADENCE=y CONFIG_MMC_SDHCI_TEGRA=y +CONFIG_MMC_SDHCI_F_SDH30=y CONFIG_MMC_MESON_GX=y CONFIG_MMC_SDHCI_MSM=y CONFIG_MMC_SPI=y @@ -524,11 +509,11 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_PWM=y CONFIG_LEDS_SYSCON=y +CONFIG_LEDS_TRIGGER_DISK=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_CPU=y CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_LEDS_TRIGGER_PANIC=y -CONFIG_LEDS_TRIGGER_DISK=y CONFIG_EDAC=y CONFIG_EDAC_GHES=y CONFIG_RTC_CLASS=y @@ -537,13 +522,13 @@ CONFIG_RTC_DRV_RK808=m CONFIG_RTC_DRV_S5M=y CONFIG_RTC_DRV_DS3232=y CONFIG_RTC_DRV_EFI=y +CONFIG_RTC_DRV_CROS_EC=y CONFIG_RTC_DRV_S3C=y CONFIG_RTC_DRV_PL031=y CONFIG_RTC_DRV_SUN6I=y CONFIG_RTC_DRV_ARMADA38X=y CONFIG_RTC_DRV_TEGRA=y CONFIG_RTC_DRV_XGENE=y -CONFIG_RTC_DRV_CROS_EC=y CONFIG_DMADEVICES=y CONFIG_DMA_BCM2835=m CONFIG_K3_DMA=y @@ -579,7 +564,6 @@ CONFIG_HWSPINLOCK_QCOM=y CONFIG_ARM_MHU=y CONFIG_PLATFORM_MHU=y CONFIG_BCM2835_MBOX=y -CONFIG_HI6220_MBOX=y CONFIG_QCOM_APCS_IPC=y CONFIG_ROCKCHIP_IOMMU=y CONFIG_TEGRA_IOMMU_SMMU=y @@ -602,7 +586,6 @@ CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y CONFIG_EXTCON_USB_GPIO=y CONFIG_EXTCON_USBC_CROS_EC=y CONFIG_MEMORY=y -CONFIG_TEGRA_MC=y CONFIG_IIO=y CONFIG_EXYNOS_ADC=y CONFIG_ROCKCHIP_SARADC=m @@ -618,27 +601,27 @@ CONFIG_PWM_RCAR=m CONFIG_PWM_ROCKCHIP=y CONFIG_PWM_SAMSUNG=y CONFIG_PWM_TEGRA=m +CONFIG_PHY_XGENE=y +CONFIG_PHY_SUN4I_USB=y +CONFIG_PHY_HI6220_USB=y CONFIG_PHY_HISTB_COMBPHY=y CONFIG_PHY_HISI_INNO_USB2=y -CONFIG_PHY_RCAR_GEN3_USB2=y -CONFIG_PHY_RCAR_GEN3_USB3=m -CONFIG_PHY_HI6220_USB=y -CONFIG_PHY_QCOM_USB_HS=y -CONFIG_PHY_SUN4I_USB=y CONFIG_PHY_MVEBU_CP110_COMPHY=y CONFIG_PHY_QCOM_QMP=m -CONFIG_PHY_ROCKCHIP_INNO_USB2=y +CONFIG_PHY_QCOM_USB_HS=y +CONFIG_PHY_RCAR_GEN3_USB2=y +CONFIG_PHY_RCAR_GEN3_USB3=m CONFIG_PHY_ROCKCHIP_EMMC=y +CONFIG_PHY_ROCKCHIP_INNO_USB2=y CONFIG_PHY_ROCKCHIP_PCIE=m CONFIG_PHY_ROCKCHIP_TYPEC=y -CONFIG_PHY_XGENE=y CONFIG_PHY_TEGRA_XUSB=y CONFIG_QCOM_L2_PMU=y CONFIG_QCOM_L3_PMU=y -CONFIG_MESON_EFUSE=m CONFIG_QCOM_QFPROM=y CONFIG_ROCKCHIP_EFUSE=y CONFIG_UNIPHIER_EFUSE=y +CONFIG_MESON_EFUSE=m CONFIG_TEE=y CONFIG_OPTEE=y CONFIG_ARM_SCPI_PROTOCOL=y @@ -647,7 +630,6 @@ CONFIG_EFI_CAPSULE_LOADER=y CONFIG_ACPI=y CONFIG_ACPI_APEI=y CONFIG_ACPI_APEI_GHES=y -CONFIG_ACPI_APEI_PCIEAER=y CONFIG_ACPI_APEI_MEMORY_FAILURE=y CONFIG_ACPI_APEI_EINJ=y CONFIG_EXT2_FS=y @@ -682,7 +664,6 @@ CONFIG_DEBUG_INFO=y CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y -CONFIG_LOCKUP_DETECTOR=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_PREEMPT is not set # CONFIG_FTRACE is not set @@ -691,20 +672,15 @@ CONFIG_SECURITY=y CONFIG_CRYPTO_ECHAINIV=y CONFIG_CRYPTO_ANSI_CPRNG=y CONFIG_ARM64_CRYPTO=y -CONFIG_CRYPTO_SHA256_ARM64=m -CONFIG_CRYPTO_SHA512_ARM64=m CONFIG_CRYPTO_SHA1_ARM64_CE=y CONFIG_CRYPTO_SHA2_ARM64_CE=y +CONFIG_CRYPTO_SHA512_ARM64_CE=m +CONFIG_CRYPTO_SHA3_ARM64=m +CONFIG_CRYPTO_SM3_ARM64_CE=m CONFIG_CRYPTO_GHASH_ARM64_CE=y CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m CONFIG_CRYPTO_CRC32_ARM64_CE=m -CONFIG_CRYPTO_AES_ARM64=m -CONFIG_CRYPTO_AES_ARM64_CE=m CONFIG_CRYPTO_AES_ARM64_CE_CCM=y CONFIG_CRYPTO_AES_ARM64_CE_BLK=y -CONFIG_CRYPTO_AES_ARM64_NEON_BLK=m CONFIG_CRYPTO_CHACHA20_NEON=m CONFIG_CRYPTO_AES_ARM64_BS=m -CONFIG_CRYPTO_SHA512_ARM64_CE=m -CONFIG_CRYPTO_SHA3_ARM64=m -CONFIG_CRYPTO_SM3_ARM64_CE=m diff --git a/arch/arm64/crypto/aes-glue.c b/arch/arm64/crypto/aes-glue.c index 253188fb8cb0..e3e50950a863 100644 --- a/arch/arm64/crypto/aes-glue.c +++ b/arch/arm64/crypto/aes-glue.c @@ -223,8 +223,8 @@ static int ctr_encrypt(struct skcipher_request *req) kernel_neon_begin(); aes_ctr_encrypt(walk.dst.virt.addr, walk.src.virt.addr, (u8 *)ctx->key_enc, rounds, blocks, walk.iv); - err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE); kernel_neon_end(); + err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE); } if (walk.nbytes) { u8 __aligned(8) tail[AES_BLOCK_SIZE]; diff --git a/arch/arm64/include/asm/alternative.h b/arch/arm64/include/asm/alternative.h index a91933b1e2e6..4b650ec1d7dd 100644 --- a/arch/arm64/include/asm/alternative.h +++ b/arch/arm64/include/asm/alternative.h @@ -28,7 +28,12 @@ typedef void (*alternative_cb_t)(struct alt_instr *alt, __le32 *origptr, __le32 *updptr, int nr_inst); void __init apply_alternatives_all(void); -void apply_alternatives(void *start, size_t length); + +#ifdef CONFIG_MODULES +void apply_alternatives_module(void *start, size_t length); +#else +static inline void apply_alternatives_module(void *start, size_t length) { } +#endif #define ALTINSTR_ENTRY(feature,cb) \ " .word 661b - .\n" /* label */ \ diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index fda9a8ca48be..fe8777b12f86 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h @@ -306,6 +306,7 @@ struct kvm_vcpu_arch { #define KVM_ARM64_FP_ENABLED (1 << 1) /* guest FP regs loaded */ #define KVM_ARM64_FP_HOST (1 << 2) /* host FP regs loaded */ #define KVM_ARM64_HOST_SVE_IN_USE (1 << 3) /* backup for host TIF_SVE */ +#define KVM_ARM64_HOST_SVE_ENABLED (1 << 4) /* SVE enabled for EL0 */ #define vcpu_gp_regs(v) (&(v)->arch.ctxt.gp_regs) diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index 9f82d6b53851..1bdeca8918a6 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -224,10 +224,8 @@ static inline void set_pte(pte_t *ptep, pte_t pte) * Only if the new pte is valid and kernel, otherwise TLB maintenance * or update_mmu_cache() have the necessary barriers. */ - if (pte_valid_not_user(pte)) { + if (pte_valid_not_user(pte)) dsb(ishst); - isb(); - } } extern void __sync_icache_dcache(pte_t pteval); @@ -434,7 +432,6 @@ static inline void set_pmd(pmd_t *pmdp, pmd_t pmd) { WRITE_ONCE(*pmdp, pmd); dsb(ishst); - isb(); } static inline void pmd_clear(pmd_t *pmdp) @@ -485,7 +482,6 @@ static inline void set_pud(pud_t *pudp, pud_t pud) { WRITE_ONCE(*pudp, pud); dsb(ishst); - isb(); } static inline void pud_clear(pud_t *pudp) diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h index 6171178075dc..a8f84812c6e8 100644 --- a/arch/arm64/include/asm/sysreg.h +++ b/arch/arm64/include/asm/sysreg.h @@ -728,6 +728,17 @@ asm( asm volatile("msr_s " __stringify(r) ", %x0" : : "rZ" (__val)); \ } while (0) +/* + * Modify bits in a sysreg. Bits in the clear mask are zeroed, then bits in the + * set mask are set. Other bits are left as-is. + */ +#define sysreg_clear_set(sysreg, clear, set) do { \ + u64 __scs_val = read_sysreg(sysreg); \ + u64 __scs_new = (__scs_val & ~(u64)(clear)) | (set); \ + if (__scs_new != __scs_val) \ + write_sysreg(__scs_new, sysreg); \ +} while (0) + static inline void config_sctlr_el1(u32 clear, u32 set) { u32 val; diff --git a/arch/arm64/kernel/alternative.c b/arch/arm64/kernel/alternative.c index 5c4bce4ac381..36fb069fd049 100644 --- a/arch/arm64/kernel/alternative.c +++ b/arch/arm64/kernel/alternative.c @@ -122,7 +122,30 @@ static void patch_alternative(struct alt_instr *alt, } } -static void __apply_alternatives(void *alt_region, bool use_linear_alias) +/* + * We provide our own, private D-cache cleaning function so that we don't + * accidentally call into the cache.S code, which is patched by us at + * runtime. + */ +static void clean_dcache_range_nopatch(u64 start, u64 end) +{ + u64 cur, d_size, ctr_el0; + + ctr_el0 = read_sanitised_ftr_reg(SYS_CTR_EL0); + d_size = 4 << cpuid_feature_extract_unsigned_field(ctr_el0, + CTR_DMINLINE_SHIFT); + cur = start & ~(d_size - 1); + do { + /* + * We must clean+invalidate to the PoC in order to avoid + * Cortex-A53 errata 826319, 827319, 824069 and 819472 + * (this corresponds to ARM64_WORKAROUND_CLEAN_CACHE) + */ + asm volatile("dc civac, %0" : : "r" (cur) : "memory"); + } while (cur += d_size, cur < end); +} + +static void __apply_alternatives(void *alt_region, bool is_module) { struct alt_instr *alt; struct alt_region *region = alt_region; @@ -145,7 +168,7 @@ static void __apply_alternatives(void *alt_region, bool use_linear_alias) pr_info_once("patching kernel code\n"); origptr = ALT_ORIG_PTR(alt); - updptr = use_linear_alias ? lm_alias(origptr) : origptr; + updptr = is_module ? origptr : lm_alias(origptr); nr_inst = alt->orig_len / AARCH64_INSN_SIZE; if (alt->cpufeature < ARM64_CB_PATCH) @@ -155,8 +178,20 @@ static void __apply_alternatives(void *alt_region, bool use_linear_alias) alt_cb(alt, origptr, updptr, nr_inst); - flush_icache_range((uintptr_t)origptr, - (uintptr_t)(origptr + nr_inst)); + if (!is_module) { + clean_dcache_range_nopatch((u64)origptr, + (u64)(origptr + nr_inst)); + } + } + + /* + * The core module code takes care of cache maintenance in + * flush_module_icache(). + */ + if (!is_module) { + dsb(ish); + __flush_icache_all(); + isb(); } } @@ -178,7 +213,7 @@ static int __apply_alternatives_multi_stop(void *unused) isb(); } else { BUG_ON(alternatives_applied); - __apply_alternatives(®ion, true); + __apply_alternatives(®ion, false); /* Barriers provided by the cache flushing */ WRITE_ONCE(alternatives_applied, 1); } @@ -192,12 +227,14 @@ void __init apply_alternatives_all(void) stop_machine(__apply_alternatives_multi_stop, NULL, cpu_online_mask); } -void apply_alternatives(void *start, size_t length) +#ifdef CONFIG_MODULES +void apply_alternatives_module(void *start, size_t length) { struct alt_region region = { .begin = start, .end = start + length, }; - __apply_alternatives(®ion, false); + __apply_alternatives(®ion, true); } +#endif diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index d2856b129097..f24892a40d2c 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -937,7 +937,7 @@ static int __init parse_kpti(char *str) __kpti_forced = enabled ? 1 : -1; return 0; } -__setup("kpti=", parse_kpti); +early_param("kpti", parse_kpti); #endif /* CONFIG_UNMAP_KERNEL_AT_EL0 */ #ifdef CONFIG_ARM64_HW_AFDBM diff --git a/arch/arm64/kernel/module.c b/arch/arm64/kernel/module.c index 155fd91e78f4..f0f27aeefb73 100644 --- a/arch/arm64/kernel/module.c +++ b/arch/arm64/kernel/module.c @@ -448,9 +448,8 @@ int module_finalize(const Elf_Ehdr *hdr, const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; for (s = sechdrs, se = sechdrs + hdr->e_shnum; s < se; s++) { - if (strcmp(".altinstructions", secstrs + s->sh_name) == 0) { - apply_alternatives((void *)s->sh_addr, s->sh_size); - } + if (strcmp(".altinstructions", secstrs + s->sh_name) == 0) + apply_alternatives_module((void *)s->sh_addr, s->sh_size); #ifdef CONFIG_ARM64_MODULE_PLTS if (IS_ENABLED(CONFIG_DYNAMIC_FTRACE) && !strcmp(".text.ftrace_trampoline", secstrs + s->sh_name)) diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c index f3e2e3aec0b0..2faa9863d2e5 100644 --- a/arch/arm64/kernel/smp.c +++ b/arch/arm64/kernel/smp.c @@ -179,7 +179,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle) * This is the secondary CPU boot entry. We're using this CPUs * idle thread stack, but a set of temporary page tables. */ -asmlinkage void secondary_start_kernel(void) +asmlinkage notrace void secondary_start_kernel(void) { u64 mpidr = read_cpuid_mpidr() & MPIDR_HWID_BITMASK; struct mm_struct *mm = &init_mm; diff --git a/arch/arm64/kvm/fpsimd.c b/arch/arm64/kvm/fpsimd.c index dc6ecfa5a2d2..aac7808ce216 100644 --- a/arch/arm64/kvm/fpsimd.c +++ b/arch/arm64/kvm/fpsimd.c @@ -5,13 +5,14 @@ * Copyright 2018 Arm Limited * Author: Dave Martin <Dave.Martin@arm.com> */ -#include <linux/bottom_half.h> +#include <linux/irqflags.h> #include <linux/sched.h> #include <linux/thread_info.h> #include <linux/kvm_host.h> #include <asm/kvm_asm.h> #include <asm/kvm_host.h> #include <asm/kvm_mmu.h> +#include <asm/sysreg.h> /* * Called on entry to KVM_RUN unless this vcpu previously ran at least @@ -61,10 +62,16 @@ void kvm_arch_vcpu_load_fp(struct kvm_vcpu *vcpu) { BUG_ON(!current->mm); - vcpu->arch.flags &= ~(KVM_ARM64_FP_ENABLED | KVM_ARM64_HOST_SVE_IN_USE); + vcpu->arch.flags &= ~(KVM_ARM64_FP_ENABLED | + KVM_ARM64_HOST_SVE_IN_USE | + KVM_ARM64_HOST_SVE_ENABLED); vcpu->arch.flags |= KVM_ARM64_FP_HOST; + if (test_thread_flag(TIF_SVE)) vcpu->arch.flags |= KVM_ARM64_HOST_SVE_IN_USE; + + if (read_sysreg(cpacr_el1) & CPACR_EL1_ZEN_EL0EN) + vcpu->arch.flags |= KVM_ARM64_HOST_SVE_ENABLED; } /* @@ -92,19 +99,30 @@ void kvm_arch_vcpu_ctxsync_fp(struct kvm_vcpu *vcpu) */ void kvm_arch_vcpu_put_fp(struct kvm_vcpu *vcpu) { - local_bh_disable(); + unsigned long flags; - update_thread_flag(TIF_SVE, - vcpu->arch.flags & KVM_ARM64_HOST_SVE_IN_USE); + local_irq_save(flags); if (vcpu->arch.flags & KVM_ARM64_FP_ENABLED) { /* Clean guest FP state to memory and invalidate cpu view */ fpsimd_save(); fpsimd_flush_cpu_state(); - } else if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) { - /* Ensure user trap controls are correctly restored */ - fpsimd_bind_task_to_cpu(); + } else if (system_supports_sve()) { + /* + * The FPSIMD/SVE state in the CPU has not been touched, and we + * have SVE (and VHE): CPACR_EL1 (alias CPTR_EL2) has been + * reset to CPACR_EL1_DEFAULT by the Hyp code, disabling SVE + * for EL0. To avoid spurious traps, restore the trap state + * seen by kvm_arch_vcpu_load_fp(): + */ + if (vcpu->arch.flags & KVM_ARM64_HOST_SVE_ENABLED) + sysreg_clear_set(CPACR_EL1, 0, CPACR_EL1_ZEN_EL0EN); + else + sysreg_clear_set(CPACR_EL1, CPACR_EL1_ZEN_EL0EN, 0); } - local_bh_enable(); + update_thread_flag(TIF_SVE, + vcpu->arch.flags & KVM_ARM64_HOST_SVE_IN_USE); + + local_irq_restore(flags); } diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c index 49e217ac7e1e..61e93f0b5482 100644 --- a/arch/arm64/mm/dma-mapping.c +++ b/arch/arm64/mm/dma-mapping.c @@ -583,13 +583,14 @@ static void *__iommu_alloc_attrs(struct device *dev, size_t size, size >> PAGE_SHIFT); return NULL; } - if (!coherent) - __dma_flush_area(page_to_virt(page), iosize); - addr = dma_common_contiguous_remap(page, size, VM_USERMAP, prot, __builtin_return_address(0)); - if (!addr) { + if (addr) { + memset(addr, 0, size); + if (!coherent) + __dma_flush_area(page_to_virt(page), iosize); + } else { iommu_dma_unmap_page(dev, *handle, iosize, 0, attrs); dma_release_from_contiguous(dev, page, size >> PAGE_SHIFT); diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S index 5f9a73a4452c..03646e6a2ef4 100644 --- a/arch/arm64/mm/proc.S +++ b/arch/arm64/mm/proc.S @@ -217,8 +217,9 @@ ENDPROC(idmap_cpu_replace_ttbr1) .macro __idmap_kpti_put_pgtable_ent_ng, type orr \type, \type, #PTE_NG // Same bit for blocks and pages - str \type, [cur_\()\type\()p] // Update the entry and ensure it - dc civac, cur_\()\type\()p // is visible to all CPUs. + str \type, [cur_\()\type\()p] // Update the entry and ensure + dmb sy // that it is visible to all + dc civac, cur_\()\type\()p // CPUs. .endm /* diff --git a/arch/microblaze/Kconfig.debug b/arch/microblaze/Kconfig.debug index 331a3bb66297..93a737c8d1a6 100644 --- a/arch/microblaze/Kconfig.debug +++ b/arch/microblaze/Kconfig.debug @@ -8,11 +8,4 @@ config TRACE_IRQFLAGS_SUPPORT source "lib/Kconfig.debug" -config HEART_BEAT - bool "Heart beat function for kernel" - default n - help - This option turns on/off heart beat kernel functionality. - First GPIO node is taken. - endmenu diff --git a/arch/microblaze/include/asm/setup.h b/arch/microblaze/include/asm/setup.h index d5384f6f36f7..ce9b7b786156 100644 --- a/arch/microblaze/include/asm/setup.h +++ b/arch/microblaze/include/asm/setup.h @@ -19,15 +19,10 @@ extern char cmd_line[COMMAND_LINE_SIZE]; extern char *klimit; -void microblaze_heartbeat(void); -void microblaze_setup_heartbeat(void); - # ifdef CONFIG_MMU extern void mmu_reset(void); # endif /* CONFIG_MMU */ -extern void of_platform_reset_gpio_probe(void); - void time_init(void); void init_IRQ(void); void machine_early_init(const char *cmdline, unsigned int ram, diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h index 9774e1d9507b..a62d09420a47 100644 --- a/arch/microblaze/include/asm/unistd.h +++ b/arch/microblaze/include/asm/unistd.h @@ -38,6 +38,6 @@ #endif /* __ASSEMBLY__ */ -#define __NR_syscalls 399 +#define __NR_syscalls 401 #endif /* _ASM_MICROBLAZE_UNISTD_H */ diff --git a/arch/microblaze/include/uapi/asm/unistd.h b/arch/microblaze/include/uapi/asm/unistd.h index eb156f914793..7a9f16a76413 100644 --- a/arch/microblaze/include/uapi/asm/unistd.h +++ b/arch/microblaze/include/uapi/asm/unistd.h @@ -415,5 +415,7 @@ #define __NR_pkey_alloc 396 #define __NR_pkey_free 397 #define __NR_statx 398 +#define __NR_io_pgetevents 399 +#define __NR_rseq 400 #endif /* _UAPI_ASM_MICROBLAZE_UNISTD_H */ diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile index 7e99cf6984a1..dd71637437f4 100644 --- a/arch/microblaze/kernel/Makefile +++ b/arch/microblaze/kernel/Makefile @@ -8,7 +8,6 @@ ifdef CONFIG_FUNCTION_TRACER CFLAGS_REMOVE_timer.o = -pg CFLAGS_REMOVE_intc.o = -pg CFLAGS_REMOVE_early_printk.o = -pg -CFLAGS_REMOVE_heartbeat.o = -pg CFLAGS_REMOVE_ftrace.o = -pg CFLAGS_REMOVE_process.o = -pg endif @@ -17,12 +16,11 @@ extra-y := head.o vmlinux.lds obj-y += dma.o exceptions.o \ hw_exception_handler.o irq.o \ - platform.o process.o prom.o ptrace.o \ + process.o prom.o ptrace.o \ reset.o setup.o signal.o sys_microblaze.o timer.o traps.o unwind.o obj-y += cpu/ -obj-$(CONFIG_HEART_BEAT) += heartbeat.o obj-$(CONFIG_MODULES) += microblaze_ksyms.o module.o obj-$(CONFIG_MMU) += misc.o obj-$(CONFIG_STACKTRACE) += stacktrace.o diff --git a/arch/microblaze/kernel/heartbeat.c b/arch/microblaze/kernel/heartbeat.c deleted file mode 100644 index 2022130139d2..000000000000 --- a/arch/microblaze/kernel/heartbeat.c +++ /dev/null @@ -1,72 +0,0 @@ -/* - * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu> - * Copyright (C) 2007-2009 PetaLogix - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/sched.h> -#include <linux/sched/loadavg.h> -#include <linux/io.h> - -#include <asm/setup.h> -#include <asm/page.h> -#include <asm/prom.h> - -static unsigned int base_addr; - -void microblaze_heartbeat(void) -{ - static unsigned int cnt, period, dist; - - if (base_addr) { - if (cnt == 0 || cnt == dist) - out_be32(base_addr, 1); - else if (cnt == 7 || cnt == dist + 7) - out_be32(base_addr, 0); - - if (++cnt > period) { - cnt = 0; - /* - * The hyperbolic function below modifies the heartbeat - * period length in dependency of the current (5min) - * load. It goes through the points f(0)=126, f(1)=86, - * f(5)=51, f(inf)->30. - */ - period = ((672 << FSHIFT) / (5 * avenrun[0] + - (7 << FSHIFT))) + 30; - dist = period / 4; - } - } -} - -void microblaze_setup_heartbeat(void) -{ - struct device_node *gpio = NULL; - int *prop; - int j; - const char * const gpio_list[] = { - "xlnx,xps-gpio-1.00.a", - NULL - }; - - for (j = 0; gpio_list[j] != NULL; j++) { - gpio = of_find_compatible_node(NULL, NULL, gpio_list[j]); - if (gpio) - break; - } - - if (gpio) { - base_addr = be32_to_cpup(of_get_property(gpio, "reg", NULL)); - base_addr = (unsigned long) ioremap(base_addr, PAGE_SIZE); - pr_notice("Heartbeat GPIO at 0x%x\n", base_addr); - - /* GPIO is configured as output */ - prop = (int *) of_get_property(gpio, "xlnx,is-bidir", NULL); - if (prop) - out_be32(base_addr + 4, 0); - } -} diff --git a/arch/microblaze/kernel/platform.c b/arch/microblaze/kernel/platform.c deleted file mode 100644 index 2540d60610d9..000000000000 --- a/arch/microblaze/kernel/platform.c +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright 2008 Michal Simek <monstr@monstr.eu> - * - * based on virtex.c file - * - * Copyright 2007 Secret Lab Technologies Ltd. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#include <linux/init.h> -#include <linux/of_platform.h> -#include <asm/setup.h> - -static struct of_device_id xilinx_of_bus_ids[] __initdata = { - { .compatible = "simple-bus", }, - { .compatible = "xlnx,compound", }, - {} -}; - -static int __init microblaze_device_probe(void) -{ - of_platform_bus_probe(NULL, xilinx_of_bus_ids, NULL); - of_platform_reset_gpio_probe(); - return 0; -} -device_initcall(microblaze_device_probe); diff --git a/arch/microblaze/kernel/reset.c b/arch/microblaze/kernel/reset.c index bab4c8330ef4..fcbe1daf6316 100644 --- a/arch/microblaze/kernel/reset.c +++ b/arch/microblaze/kernel/reset.c @@ -18,7 +18,7 @@ static int handle; /* reset pin handle */ static unsigned int reset_val; -void of_platform_reset_gpio_probe(void) +static int of_platform_reset_gpio_probe(void) { int ret; handle = of_get_named_gpio(of_find_node_by_path("/"), @@ -27,13 +27,13 @@ void of_platform_reset_gpio_probe(void) if (!gpio_is_valid(handle)) { pr_info("Skipping unavailable RESET gpio %d (%s)\n", handle, "reset"); - return; + return -ENODEV; } ret = gpio_request(handle, "reset"); if (ret < 0) { pr_info("GPIO pin is already allocated\n"); - return; + return ret; } /* get current setup value */ @@ -51,11 +51,12 @@ void of_platform_reset_gpio_probe(void) pr_info("RESET: Registered gpio device: %d, current val: %d\n", handle, reset_val); - return; + return 0; err: gpio_free(handle); - return; + return ret; } +device_initcall(of_platform_reset_gpio_probe); static void gpio_system_reset(void) diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S index 56bcf313121f..6ab650593792 100644 --- a/arch/microblaze/kernel/syscall_table.S +++ b/arch/microblaze/kernel/syscall_table.S @@ -400,3 +400,5 @@ ENTRY(sys_call_table) .long sys_pkey_alloc .long sys_pkey_free .long sys_statx + .long sys_io_pgetevents + .long sys_rseq diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c index 7de941cbbd94..a6683484b3a1 100644 --- a/arch/microblaze/kernel/timer.c +++ b/arch/microblaze/kernel/timer.c @@ -156,9 +156,6 @@ static inline void timer_ack(void) static irqreturn_t timer_interrupt(int irq, void *dev_id) { struct clock_event_device *evt = &clockevent_xilinx_timer; -#ifdef CONFIG_HEART_BEAT - microblaze_heartbeat(); -#endif timer_ack(); evt->event_handler(evt); return IRQ_HANDLED; @@ -318,10 +315,6 @@ static int __init xilinx_timer_init(struct device_node *timer) return ret; } -#ifdef CONFIG_HEART_BEAT - microblaze_setup_heartbeat(); -#endif - ret = xilinx_clocksource_init(); if (ret) return ret; diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 3f9deec70b92..08c10c518f83 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -65,6 +65,7 @@ config MIPS select HAVE_OPROFILE select HAVE_PERF_EVENTS select HAVE_REGS_AND_STACK_ACCESS_API + select HAVE_RSEQ select HAVE_STACKPROTECTOR select HAVE_SYSCALL_TRACEPOINTS select HAVE_VIRT_CPU_ACCOUNTING_GEN if 64BIT || !SMP diff --git a/arch/mips/ath79/mach-pb44.c b/arch/mips/ath79/mach-pb44.c index 6b2c6f3baefa..75fb96ca61db 100644 --- a/arch/mips/ath79/mach-pb44.c +++ b/arch/mips/ath79/mach-pb44.c @@ -34,7 +34,7 @@ #define PB44_KEYS_DEBOUNCE_INTERVAL (3 * PB44_KEYS_POLL_INTERVAL) static struct gpiod_lookup_table pb44_i2c_gpiod_table = { - .dev_id = "i2c-gpio", + .dev_id = "i2c-gpio.0", .table = { GPIO_LOOKUP_IDX("ath79-gpio", PB44_GPIO_I2C_SDA, NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c index 6054d49e608e..8c9cbf13d32a 100644 --- a/arch/mips/bcm47xx/setup.c +++ b/arch/mips/bcm47xx/setup.c @@ -212,6 +212,12 @@ static int __init bcm47xx_cpu_fixes(void) */ if (bcm47xx_bus.bcma.bus.chipinfo.id == BCMA_CHIP_ID_BCM4706) cpu_wait = NULL; + + /* + * BCM47XX Erratum "R10: PCIe Transactions Periodically Fail" + * Enable ExternalSync for sync instruction to take effect + */ + set_c0_config7(MIPS_CONF7_ES); break; #endif } diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h index a7d0b836f2f7..cea8ad864b3f 100644 --- a/arch/mips/include/asm/io.h +++ b/arch/mips/include/asm/io.h @@ -414,6 +414,8 @@ static inline type pfx##in##bwlq##p(unsigned long port) \ __val = *__addr; \ slow; \ \ + /* prevent prefetching of coherent DMA data prematurely */ \ + rmb(); \ return pfx##ioswab##bwlq(__addr, __val); \ } diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index ae461d91cd1f..0bc270806ec5 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -681,6 +681,8 @@ #define MIPS_CONF7_WII (_ULCAST_(1) << 31) #define MIPS_CONF7_RPS (_ULCAST_(1) << 2) +/* ExternalSync */ +#define MIPS_CONF7_ES (_ULCAST_(1) << 8) #define MIPS_CONF7_IAR (_ULCAST_(1) << 10) #define MIPS_CONF7_AR (_ULCAST_(1) << 16) @@ -2765,6 +2767,7 @@ __BUILD_SET_C0(status) __BUILD_SET_C0(cause) __BUILD_SET_C0(config) __BUILD_SET_C0(config5) +__BUILD_SET_C0(config7) __BUILD_SET_C0(intcontrol) __BUILD_SET_C0(intctl) __BUILD_SET_C0(srsmap) diff --git a/arch/mips/include/uapi/asm/unistd.h b/arch/mips/include/uapi/asm/unistd.h index bb05e9916a5f..f25dd1d83fb7 100644 --- a/arch/mips/include/uapi/asm/unistd.h +++ b/arch/mips/include/uapi/asm/unistd.h @@ -388,17 +388,19 @@ #define __NR_pkey_alloc (__NR_Linux + 364) #define __NR_pkey_free (__NR_Linux + 365) #define __NR_statx (__NR_Linux + 366) +#define __NR_rseq (__NR_Linux + 367) +#define __NR_io_pgetevents (__NR_Linux + 368) /* * Offset of the last Linux o32 flavoured syscall */ -#define __NR_Linux_syscalls 366 +#define __NR_Linux_syscalls 368 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ #define __NR_O32_Linux 4000 -#define __NR_O32_Linux_syscalls 366 +#define __NR_O32_Linux_syscalls 368 #if _MIPS_SIM == _MIPS_SIM_ABI64 @@ -733,16 +735,18 @@ #define __NR_pkey_alloc (__NR_Linux + 324) #define __NR_pkey_free (__NR_Linux + 325) #define __NR_statx (__NR_Linux + 326) +#define __NR_rseq (__NR_Linux + 327) +#define __NR_io_pgetevents (__NR_Linux + 328) /* * Offset of the last Linux 64-bit flavoured syscall */ -#define __NR_Linux_syscalls 326 +#define __NR_Linux_syscalls 328 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */ #define __NR_64_Linux 5000 -#define __NR_64_Linux_syscalls 326 +#define __NR_64_Linux_syscalls 328 #if _MIPS_SIM == _MIPS_SIM_NABI32 @@ -1081,15 +1085,17 @@ #define __NR_pkey_alloc (__NR_Linux + 328) #define __NR_pkey_free (__NR_Linux + 329) #define __NR_statx (__NR_Linux + 330) +#define __NR_rseq (__NR_Linux + 331) +#define __NR_io_pgetevents (__NR_Linux + 332) /* * Offset of the last N32 flavoured syscall */ -#define __NR_Linux_syscalls 330 +#define __NR_Linux_syscalls 332 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */ #define __NR_N32_Linux 6000 -#define __NR_N32_Linux_syscalls 330 +#define __NR_N32_Linux_syscalls 332 #endif /* _UAPI_ASM_UNISTD_H */ diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S index 38a302919e6b..d7de8adcfcc8 100644 --- a/arch/mips/kernel/entry.S +++ b/arch/mips/kernel/entry.S @@ -79,6 +79,10 @@ FEXPORT(ret_from_fork) jal schedule_tail # a0 = struct task_struct *prev FEXPORT(syscall_exit) +#ifdef CONFIG_DEBUG_RSEQ + move a0, sp + jal rseq_syscall +#endif local_irq_disable # make sure need_resched and # signals dont change between # sampling and return @@ -141,6 +145,10 @@ work_notifysig: # deal with pending signals and j resume_userspace_check FEXPORT(syscall_exit_partial) +#ifdef CONFIG_DEBUG_RSEQ + move a0, sp + jal rseq_syscall +#endif local_irq_disable # make sure need_resched doesn't # change between and return LONG_L a2, TI_FLAGS($28) # current->work diff --git a/arch/mips/kernel/mcount.S b/arch/mips/kernel/mcount.S index f2ee7e1e3342..cff52b283e03 100644 --- a/arch/mips/kernel/mcount.S +++ b/arch/mips/kernel/mcount.S @@ -119,10 +119,20 @@ NESTED(_mcount, PT_SIZE, ra) EXPORT_SYMBOL(_mcount) PTR_LA t1, ftrace_stub PTR_L t2, ftrace_trace_function /* Prepare t2 for (1) */ - bne t1, t2, static_trace + beq t1, t2, fgraph_trace nop + MCOUNT_SAVE_REGS + + move a0, ra /* arg1: self return address */ + jalr t2 /* (1) call *ftrace_trace_function */ + move a1, AT /* arg2: parent's return address */ + + MCOUNT_RESTORE_REGS + +fgraph_trace: #ifdef CONFIG_FUNCTION_GRAPH_TRACER + PTR_LA t1, ftrace_stub PTR_L t3, ftrace_graph_return bne t1, t3, ftrace_graph_caller nop @@ -131,24 +141,11 @@ EXPORT_SYMBOL(_mcount) bne t1, t3, ftrace_graph_caller nop #endif - b ftrace_stub -#ifdef CONFIG_32BIT - addiu sp, sp, 8 -#else - nop -#endif -static_trace: - MCOUNT_SAVE_REGS - - move a0, ra /* arg1: self return address */ - jalr t2 /* (1) call *ftrace_trace_function */ - move a1, AT /* arg2: parent's return address */ - - MCOUNT_RESTORE_REGS #ifdef CONFIG_32BIT addiu sp, sp, 8 #endif + .globl ftrace_stub ftrace_stub: RETURN_BACK diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index a9a7d78803cd..91d3c8c46097 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -590,3 +590,5 @@ EXPORT(sys_call_table) PTR sys_pkey_alloc PTR sys_pkey_free /* 4365 */ PTR sys_statx + PTR sys_rseq + PTR sys_io_pgetevents diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index 65d5aeeb9bdb..358d9599983d 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -439,4 +439,6 @@ EXPORT(sys_call_table) PTR sys_pkey_alloc PTR sys_pkey_free /* 5325 */ PTR sys_statx + PTR sys_rseq + PTR sys_io_pgetevents .size sys_call_table,.-sys_call_table diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index cbf190ef9e8a..c65eaacc1abf 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -434,4 +434,6 @@ EXPORT(sysn32_call_table) PTR sys_pkey_alloc PTR sys_pkey_free PTR sys_statx /* 6330 */ + PTR sys_rseq + PTR compat_sys_io_pgetevents .size sysn32_call_table,.-sysn32_call_table diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 9ebe3e2403b1..73913f072e39 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -583,4 +583,6 @@ EXPORT(sys32_call_table) PTR sys_pkey_alloc PTR sys_pkey_free /* 4365 */ PTR sys_statx + PTR sys_rseq + PTR compat_sys_io_pgetevents .size sys32_call_table,.-sys32_call_table diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index 9e224469c788..0a9cfe7a0372 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -801,6 +801,8 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs) regs->regs[0] = 0; /* Don't deal with this again. */ } + rseq_signal_deliver(ksig, regs); + if (sig_uses_siginfo(&ksig->ka, abi)) ret = abi->setup_rt_frame(vdso + abi->vdso->off_rt_sigreturn, ksig, regs, oldset); @@ -868,6 +870,7 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, void *unused, if (thread_info_flags & _TIF_NOTIFY_RESUME) { clear_thread_flag(TIF_NOTIFY_RESUME); tracehook_notify_resume(regs); + rseq_handle_notify_resume(NULL, regs); } user_enter(); diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index c480770fabcd..17526bebcbd2 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -244,11 +244,11 @@ config PARISC_PAGE_SIZE_4KB config PARISC_PAGE_SIZE_16KB bool "16KB" - depends on PA8X00 + depends on PA8X00 && BROKEN config PARISC_PAGE_SIZE_64KB bool "64KB" - depends on PA8X00 + depends on PA8X00 && BROKEN endchoice @@ -347,7 +347,7 @@ config NR_CPUS int "Maximum number of CPUs (2-32)" range 2 32 depends on SMP - default "32" + default "4" endmenu diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile index 714284ea6cc2..5ce030266e7d 100644 --- a/arch/parisc/Makefile +++ b/arch/parisc/Makefile @@ -65,10 +65,6 @@ endif # kernel. cflags-y += -mdisable-fpregs -# Without this, "ld -r" results in .text sections that are too big -# (> 0x40000) for branches to reach stubs. -cflags-y += -ffunction-sections - # Use long jumps instead of long branches (needed if your linker fails to # link a too big vmlinux executable). Not enabled for building modules. ifdef CONFIG_MLONGCALLS diff --git a/arch/parisc/include/asm/signal.h b/arch/parisc/include/asm/signal.h index eeb5c8858663..715c96ba2ec8 100644 --- a/arch/parisc/include/asm/signal.h +++ b/arch/parisc/include/asm/signal.h @@ -21,14 +21,6 @@ typedef struct { unsigned long sig[_NSIG_WORDS]; } sigset_t; -#ifndef __KERNEL__ -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - sigset_t sa_mask; /* mask last for extensibility */ -}; -#endif - #include <asm/sigcontext.h> #endif /* !__ASSEMBLY */ diff --git a/arch/parisc/include/uapi/asm/unistd.h b/arch/parisc/include/uapi/asm/unistd.h index 4872e77aa96b..dc77c5a51db7 100644 --- a/arch/parisc/include/uapi/asm/unistd.h +++ b/arch/parisc/include/uapi/asm/unistd.h @@ -364,8 +364,9 @@ #define __NR_preadv2 (__NR_Linux + 347) #define __NR_pwritev2 (__NR_Linux + 348) #define __NR_statx (__NR_Linux + 349) +#define __NR_io_pgetevents (__NR_Linux + 350) -#define __NR_Linux_syscalls (__NR_statx + 1) +#define __NR_Linux_syscalls (__NR_io_pgetevents + 1) #define __IGNORE_select /* newselect */ diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c index e0e1c9775c32..5eb979d04b90 100644 --- a/arch/parisc/kernel/drivers.c +++ b/arch/parisc/kernel/drivers.c @@ -154,17 +154,14 @@ int register_parisc_driver(struct parisc_driver *driver) { /* FIXME: we need this because apparently the sti * driver can be registered twice */ - if(driver->drv.name) { - printk(KERN_WARNING - "BUG: skipping previously registered driver %s\n", - driver->name); + if (driver->drv.name) { + pr_warn("BUG: skipping previously registered driver %s\n", + driver->name); return 1; } if (!driver->probe) { - printk(KERN_WARNING - "BUG: driver %s has no probe routine\n", - driver->name); + pr_warn("BUG: driver %s has no probe routine\n", driver->name); return 1; } @@ -491,12 +488,9 @@ alloc_pa_dev(unsigned long hpa, struct hardware_path *mod_path) dev = create_parisc_device(mod_path); if (dev->id.hw_type != HPHW_FAULTY) { - printk(KERN_ERR "Two devices have hardware path [%s]. " - "IODC data for second device: " - "%02x%02x%02x%02x%02x%02x\n" - "Rearranging GSC cards sometimes helps\n", - parisc_pathname(dev), iodc_data[0], iodc_data[1], - iodc_data[3], iodc_data[4], iodc_data[5], iodc_data[6]); + pr_err("Two devices have hardware path [%s]. IODC data for second device: %7phN\n" + "Rearranging GSC cards sometimes helps\n", + parisc_pathname(dev), iodc_data); return NULL; } @@ -528,8 +522,7 @@ alloc_pa_dev(unsigned long hpa, struct hardware_path *mod_path) * the keyboard controller */ if ((hpa & 0xfff) == 0 && insert_resource(&iomem_resource, &dev->hpa)) - printk("Unable to claim HPA %lx for device %s\n", - hpa, name); + pr_warn("Unable to claim HPA %lx for device %s\n", hpa, name); return dev; } @@ -875,7 +868,7 @@ static void print_parisc_device(struct parisc_device *dev) static int count; print_pa_hwpath(dev, hw_path); - printk(KERN_INFO "%d. %s at 0x%px [%s] { %d, 0x%x, 0x%.3x, 0x%.5x }", + pr_info("%d. %s at 0x%px [%s] { %d, 0x%x, 0x%.3x, 0x%.5x }", ++count, dev->name, (void*) dev->hpa.start, hw_path, dev->id.hw_type, dev->id.hversion_rev, dev->id.hversion, dev->id.sversion); diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S index 6308749359e4..fe3f2a49d2b1 100644 --- a/arch/parisc/kernel/syscall_table.S +++ b/arch/parisc/kernel/syscall_table.S @@ -445,6 +445,7 @@ ENTRY_COMP(preadv2) ENTRY_COMP(pwritev2) ENTRY_SAME(statx) + ENTRY_COMP(io_pgetevents) /* 350 */ .ifne (. - 90b) - (__NR_Linux_syscalls * (91b - 90b)) diff --git a/arch/parisc/kernel/unwind.c b/arch/parisc/kernel/unwind.c index 143f90e2f9f3..2ef83d78eec4 100644 --- a/arch/parisc/kernel/unwind.c +++ b/arch/parisc/kernel/unwind.c @@ -25,7 +25,7 @@ /* #define DEBUG 1 */ #ifdef DEBUG -#define dbg(x...) printk(x) +#define dbg(x...) pr_debug(x) #else #define dbg(x...) #endif @@ -182,7 +182,7 @@ int __init unwind_init(void) start = (long)&__start___unwind[0]; stop = (long)&__stop___unwind[0]; - printk("unwind_init: start = 0x%lx, end = 0x%lx, entries = %lu\n", + dbg("unwind_init: start = 0x%lx, end = 0x%lx, entries = %lu\n", start, stop, (stop - start) / sizeof(struct unwind_table_entry)); diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index bd06a3ccda31..2ea575cb3401 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -244,6 +244,7 @@ cpu-as-$(CONFIG_4xx) += -Wa,-m405 cpu-as-$(CONFIG_ALTIVEC) += $(call as-option,-Wa$(comma)-maltivec) cpu-as-$(CONFIG_E200) += -Wa,-me200 cpu-as-$(CONFIG_PPC_BOOK3S_64) += -Wa,-mpower4 +cpu-as-$(CONFIG_PPC_E500MC) += $(call as-option,-Wa$(comma)-me500mc) KBUILD_AFLAGS += $(cpu-as-y) KBUILD_CFLAGS += $(cpu-as-y) diff --git a/arch/powerpc/include/asm/book3s/32/pgalloc.h b/arch/powerpc/include/asm/book3s/32/pgalloc.h index 6a6673907e45..82e44b1a00ae 100644 --- a/arch/powerpc/include/asm/book3s/32/pgalloc.h +++ b/arch/powerpc/include/asm/book3s/32/pgalloc.h @@ -108,6 +108,7 @@ static inline void pgtable_free(void *table, unsigned index_size) } #define check_pgt_cache() do { } while (0) +#define get_hugepd_cache_index(x) (x) #ifdef CONFIG_SMP static inline void pgtable_free_tlb(struct mmu_gather *tlb, @@ -137,7 +138,6 @@ static inline void pgtable_free_tlb(struct mmu_gather *tlb, static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t table, unsigned long address) { - pgtable_page_dtor(table); pgtable_free_tlb(tlb, page_address(table), 0); } #endif /* _ASM_POWERPC_BOOK3S_32_PGALLOC_H */ diff --git a/arch/powerpc/include/asm/book3s/64/pgtable-4k.h b/arch/powerpc/include/asm/book3s/64/pgtable-4k.h index af5f2baac80f..a069dfcac9a9 100644 --- a/arch/powerpc/include/asm/book3s/64/pgtable-4k.h +++ b/arch/powerpc/include/asm/book3s/64/pgtable-4k.h @@ -49,6 +49,27 @@ static inline int hugepd_ok(hugepd_t hpd) } #define is_hugepd(hpd) (hugepd_ok(hpd)) +/* + * 16M and 16G huge page directory tables are allocated from slab cache + * + */ +#define H_16M_CACHE_INDEX (PAGE_SHIFT + H_PTE_INDEX_SIZE + H_PMD_INDEX_SIZE - 24) +#define H_16G_CACHE_INDEX \ + (PAGE_SHIFT + H_PTE_INDEX_SIZE + H_PMD_INDEX_SIZE + H_PUD_INDEX_SIZE - 34) + +static inline int get_hugepd_cache_index(int index) +{ + switch (index) { + case H_16M_CACHE_INDEX: + return HTLB_16M_INDEX; + case H_16G_CACHE_INDEX: + return HTLB_16G_INDEX; + default: + BUG(); + } + /* should not reach */ +} + #else /* !CONFIG_HUGETLB_PAGE */ static inline int pmd_huge(pmd_t pmd) { return 0; } static inline int pud_huge(pud_t pud) { return 0; } diff --git a/arch/powerpc/include/asm/book3s/64/pgtable-64k.h b/arch/powerpc/include/asm/book3s/64/pgtable-64k.h index fb4b3ba52339..d7ee249d6890 100644 --- a/arch/powerpc/include/asm/book3s/64/pgtable-64k.h +++ b/arch/powerpc/include/asm/book3s/64/pgtable-64k.h @@ -45,8 +45,17 @@ static inline int hugepd_ok(hugepd_t hpd) { return 0; } + #define is_hugepd(pdep) 0 +/* + * This should never get called + */ +static inline int get_hugepd_cache_index(int index) +{ + BUG(); +} + #else /* !CONFIG_HUGETLB_PAGE */ static inline int pmd_huge(pmd_t pmd) { return 0; } static inline int pud_huge(pud_t pud) { return 0; } diff --git a/arch/powerpc/include/asm/book3s/64/pgtable.h b/arch/powerpc/include/asm/book3s/64/pgtable.h index 63cee159022b..42aafba7a308 100644 --- a/arch/powerpc/include/asm/book3s/64/pgtable.h +++ b/arch/powerpc/include/asm/book3s/64/pgtable.h @@ -287,6 +287,11 @@ enum pgtable_index { PMD_INDEX, PUD_INDEX, PGD_INDEX, + /* + * Below are used with 4k page size and hugetlb + */ + HTLB_16M_INDEX, + HTLB_16G_INDEX, }; extern unsigned long __vmalloc_start; diff --git a/arch/powerpc/include/asm/nmi.h b/arch/powerpc/include/asm/nmi.h index 0f571e0ebca1..bd9ba8defd72 100644 --- a/arch/powerpc/include/asm/nmi.h +++ b/arch/powerpc/include/asm/nmi.h @@ -8,7 +8,7 @@ extern void arch_touch_nmi_watchdog(void); static inline void arch_touch_nmi_watchdog(void) {} #endif -#if defined(CONFIG_PPC_BOOK3S_64) && defined(CONFIG_STACKTRACE) +#if defined(CONFIG_NMI_IPI) && defined(CONFIG_STACKTRACE) extern void arch_trigger_cpumask_backtrace(const cpumask_t *mask, bool exclude_self); #define arch_trigger_cpumask_backtrace arch_trigger_cpumask_backtrace diff --git a/arch/powerpc/include/asm/nohash/32/pgalloc.h b/arch/powerpc/include/asm/nohash/32/pgalloc.h index 1707781d2f20..8825953c225b 100644 --- a/arch/powerpc/include/asm/nohash/32/pgalloc.h +++ b/arch/powerpc/include/asm/nohash/32/pgalloc.h @@ -109,6 +109,7 @@ static inline void pgtable_free(void *table, unsigned index_size) } #define check_pgt_cache() do { } while (0) +#define get_hugepd_cache_index(x) (x) #ifdef CONFIG_SMP static inline void pgtable_free_tlb(struct mmu_gather *tlb, @@ -139,7 +140,6 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t table, unsigned long address) { tlb_flush_pgtable(tlb, address); - pgtable_page_dtor(table); pgtable_free_tlb(tlb, page_address(table), 0); } #endif /* _ASM_POWERPC_PGALLOC_32_H */ diff --git a/arch/powerpc/include/asm/nohash/64/pgalloc.h b/arch/powerpc/include/asm/nohash/64/pgalloc.h index 0e693f322cb2..e2d62d033708 100644 --- a/arch/powerpc/include/asm/nohash/64/pgalloc.h +++ b/arch/powerpc/include/asm/nohash/64/pgalloc.h @@ -141,6 +141,7 @@ static inline void pgtable_free(void *table, int shift) } } +#define get_hugepd_cache_index(x) (x) #ifdef CONFIG_SMP static inline void pgtable_free_tlb(struct mmu_gather *tlb, void *table, int shift) { diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h index cfcf6a874cfa..01b5171ea189 100644 --- a/arch/powerpc/include/asm/systbl.h +++ b/arch/powerpc/include/asm/systbl.h @@ -393,3 +393,4 @@ SYSCALL(pkey_alloc) SYSCALL(pkey_free) SYSCALL(pkey_mprotect) SYSCALL(rseq) +COMPAT_SYS(io_pgetevents) diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h index 1e9708632dce..c19379f0a32e 100644 --- a/arch/powerpc/include/asm/unistd.h +++ b/arch/powerpc/include/asm/unistd.h @@ -12,7 +12,7 @@ #include <uapi/asm/unistd.h> -#define NR_syscalls 388 +#define NR_syscalls 389 #define __NR__exit __NR_exit diff --git a/arch/powerpc/include/uapi/asm/unistd.h b/arch/powerpc/include/uapi/asm/unistd.h index ac5ba55066dd..985534d0b448 100644 --- a/arch/powerpc/include/uapi/asm/unistd.h +++ b/arch/powerpc/include/uapi/asm/unistd.h @@ -399,5 +399,6 @@ #define __NR_pkey_free 385 #define __NR_pkey_mprotect 386 #define __NR_rseq 387 +#define __NR_io_pgetevents 388 #endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */ diff --git a/arch/powerpc/kernel/dt_cpu_ftrs.c b/arch/powerpc/kernel/dt_cpu_ftrs.c index 4be1c0de9406..96dd3d871986 100644 --- a/arch/powerpc/kernel/dt_cpu_ftrs.c +++ b/arch/powerpc/kernel/dt_cpu_ftrs.c @@ -711,7 +711,8 @@ static __init void cpufeatures_cpu_quirks(void) cur_cpu_spec->cpu_features |= CPU_FTR_P9_TM_HV_ASSIST; cur_cpu_spec->cpu_features |= CPU_FTR_P9_TM_XER_SO_BUG; cur_cpu_spec->cpu_features |= CPU_FTR_POWER9_DD2_1; - } else /* DD2.1 and up have DD2_1 */ + } else if ((version & 0xffff0000) == 0x004e0000) + /* DD2.1 and up have DD2_1 */ cur_cpu_spec->cpu_features |= CPU_FTR_POWER9_DD2_1; if ((version & 0xffff0000) == 0x004e0000) { diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c index 4f861055a852..d63b488d34d7 100644 --- a/arch/powerpc/kernel/pci_32.c +++ b/arch/powerpc/kernel/pci_32.c @@ -285,9 +285,6 @@ pci_bus_to_hose(int bus) * Note that the returned IO or memory base is a physical address */ -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wpragmas" -#pragma GCC diagnostic ignored "-Wattribute-alias" SYSCALL_DEFINE3(pciconfig_iobase, long, which, unsigned long, bus, unsigned long, devfn) { @@ -313,4 +310,3 @@ SYSCALL_DEFINE3(pciconfig_iobase, long, which, return result; } -#pragma GCC diagnostic pop diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 812171c09f42..dff28f903512 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -203,9 +203,6 @@ void pcibios_setup_phb_io_space(struct pci_controller *hose) #define IOBASE_ISA_IO 3 #define IOBASE_ISA_MEM 4 -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wpragmas" -#pragma GCC diagnostic ignored "-Wattribute-alias" SYSCALL_DEFINE3(pciconfig_iobase, long, which, unsigned long, in_bus, unsigned long, in_devfn) { @@ -259,7 +256,6 @@ SYSCALL_DEFINE3(pciconfig_iobase, long, which, unsigned long, in_bus, return -EOPNOTSUPP; } -#pragma GCC diagnostic pop #ifdef CONFIG_NUMA int pcibus_to_node(struct pci_bus *bus) diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 7fb9f83dcde8..8afd146bc9c7 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -1051,9 +1051,6 @@ struct pseries_errorlog *get_pseries_errorlog(struct rtas_error_log *log, } /* We assume to be passed big endian arguments */ -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wpragmas" -#pragma GCC diagnostic ignored "-Wattribute-alias" SYSCALL_DEFINE1(rtas, struct rtas_args __user *, uargs) { struct rtas_args args; @@ -1140,7 +1137,6 @@ SYSCALL_DEFINE1(rtas, struct rtas_args __user *, uargs) return 0; } -#pragma GCC diagnostic pop /* * Call early during boot, before mem init, to retrieve the RTAS diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 62b1a40d8957..40b44bb53a4e 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -701,11 +701,18 @@ static int ppc_panic_event(struct notifier_block *this, unsigned long event, void *ptr) { /* + * panic does a local_irq_disable, but we really + * want interrupts to be hard disabled. + */ + hard_irq_disable(); + + /* * If firmware-assisted dump has been registered then trigger * firmware-assisted dump and let firmware handle everything else. */ crash_fadump(NULL, ptr); - ppc_md.panic(ptr); /* May not return */ + if (ppc_md.panic) + ppc_md.panic(ptr); /* May not return */ return NOTIFY_DONE; } @@ -716,7 +723,8 @@ static struct notifier_block ppc_panic_block = { void __init setup_panic(void) { - if (!ppc_md.panic) + /* PPC64 always does a hard irq disable in its panic handler */ + if (!IS_ENABLED(CONFIG_PPC64) && !ppc_md.panic) return; atomic_notifier_chain_register(&panic_notifier_list, &ppc_panic_block); } diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 7a7ce8ad455e..225bc5f91049 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -387,6 +387,14 @@ void early_setup_secondary(void) #endif /* CONFIG_SMP */ +void panic_smp_self_stop(void) +{ + hard_irq_disable(); + spin_begin(); + while (1) + spin_cpu_relax(); +} + #if defined(CONFIG_SMP) || defined(CONFIG_KEXEC_CORE) static bool use_spinloop(void) { diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index 17fe4339ba59..b3e8db376ecd 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c @@ -134,7 +134,7 @@ static void do_signal(struct task_struct *tsk) /* Re-enable the breakpoints for the signal stack */ thread_change_pc(tsk, tsk->thread.regs); - rseq_signal_deliver(tsk->thread.regs); + rseq_signal_deliver(&ksig, tsk->thread.regs); if (is32) { if (ksig.ka.sa.sa_flags & SA_SIGINFO) @@ -170,7 +170,7 @@ void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags) if (thread_info_flags & _TIF_NOTIFY_RESUME) { clear_thread_flag(TIF_NOTIFY_RESUME); tracehook_notify_resume(regs); - rseq_handle_notify_resume(regs); + rseq_handle_notify_resume(NULL, regs); } user_enter(); diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index 5eedbb282d42..e6474a45cef5 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -1038,9 +1038,6 @@ static int do_setcontext_tm(struct ucontext __user *ucp, } #endif -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wpragmas" -#pragma GCC diagnostic ignored "-Wattribute-alias" #ifdef CONFIG_PPC64 COMPAT_SYSCALL_DEFINE3(swapcontext, struct ucontext __user *, old_ctx, struct ucontext __user *, new_ctx, int, ctx_size) @@ -1134,7 +1131,6 @@ SYSCALL_DEFINE3(swapcontext, struct ucontext __user *, old_ctx, set_thread_flag(TIF_RESTOREALL); return 0; } -#pragma GCC diagnostic pop #ifdef CONFIG_PPC64 COMPAT_SYSCALL_DEFINE0(rt_sigreturn) @@ -1231,9 +1227,6 @@ SYSCALL_DEFINE0(rt_sigreturn) return 0; } -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wpragmas" -#pragma GCC diagnostic ignored "-Wattribute-alias" #ifdef CONFIG_PPC32 SYSCALL_DEFINE3(debug_setcontext, struct ucontext __user *, ctx, int, ndbg, struct sig_dbg_op __user *, dbg) @@ -1337,7 +1330,6 @@ SYSCALL_DEFINE3(debug_setcontext, struct ucontext __user *, ctx, return 0; } #endif -#pragma GCC diagnostic pop /* * OK, we're invoking a handler diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index d42b60020389..83d51bf586c7 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -625,9 +625,6 @@ static long setup_trampoline(unsigned int syscall, unsigned int __user *tramp) /* * Handle {get,set,swap}_context operations */ -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wpragmas" -#pragma GCC diagnostic ignored "-Wattribute-alias" SYSCALL_DEFINE3(swapcontext, struct ucontext __user *, old_ctx, struct ucontext __user *, new_ctx, long, ctx_size) { @@ -693,7 +690,6 @@ SYSCALL_DEFINE3(swapcontext, struct ucontext __user *, old_ctx, set_thread_flag(TIF_RESTOREALL); return 0; } -#pragma GCC diagnostic pop /* diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 5eadfffabe35..4794d6b4f4d2 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -600,9 +600,6 @@ static void nmi_stop_this_cpu(struct pt_regs *regs) nmi_ipi_busy_count--; nmi_ipi_unlock(); - /* Remove this CPU */ - set_cpu_online(smp_processor_id(), false); - spin_begin(); while (1) spin_cpu_relax(); @@ -617,9 +614,6 @@ void smp_send_stop(void) static void stop_this_cpu(void *dummy) { - /* Remove this CPU */ - set_cpu_online(smp_processor_id(), false); - hard_irq_disable(); spin_begin(); while (1) diff --git a/arch/powerpc/kernel/stacktrace.c b/arch/powerpc/kernel/stacktrace.c index 07e97f289c52..e2c50b55138f 100644 --- a/arch/powerpc/kernel/stacktrace.c +++ b/arch/powerpc/kernel/stacktrace.c @@ -196,7 +196,7 @@ save_stack_trace_tsk_reliable(struct task_struct *tsk, EXPORT_SYMBOL_GPL(save_stack_trace_tsk_reliable); #endif /* CONFIG_HAVE_RELIABLE_STACKTRACE */ -#ifdef CONFIG_PPC_BOOK3S_64 +#if defined(CONFIG_PPC_BOOK3S_64) && defined(CONFIG_NMI_IPI) static void handle_backtrace_ipi(struct pt_regs *regs) { nmi_cpu_backtrace(regs); @@ -242,4 +242,4 @@ void arch_trigger_cpumask_backtrace(const cpumask_t *mask, bool exclude_self) { nmi_trigger_cpumask_backtrace(mask, exclude_self, raise_backtrace_ipi); } -#endif /* CONFIG_PPC64 */ +#endif /* defined(CONFIG_PPC_BOOK3S_64) && defined(CONFIG_NMI_IPI) */ diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c index 083fa06962fd..466216506eb2 100644 --- a/arch/powerpc/kernel/syscalls.c +++ b/arch/powerpc/kernel/syscalls.c @@ -62,9 +62,6 @@ out: return ret; } -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wpragmas" -#pragma GCC diagnostic ignored "-Wattribute-alias" SYSCALL_DEFINE6(mmap2, unsigned long, addr, size_t, len, unsigned long, prot, unsigned long, flags, unsigned long, fd, unsigned long, pgoff) @@ -78,7 +75,6 @@ SYSCALL_DEFINE6(mmap, unsigned long, addr, size_t, len, { return do_mmap2(addr, len, prot, flags, fd, offset, PAGE_SHIFT); } -#pragma GCC diagnostic pop #ifdef CONFIG_PPC32 /* diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 7c5f479c5c00..8a9a49c13865 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -337,7 +337,8 @@ static void free_hugepd_range(struct mmu_gather *tlb, hugepd_t *hpdp, int pdshif if (shift >= pdshift) hugepd_free(tlb, hugepte); else - pgtable_free_tlb(tlb, hugepte, pdshift - shift); + pgtable_free_tlb(tlb, hugepte, + get_hugepd_cache_index(pdshift - shift)); } static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud, diff --git a/arch/powerpc/mm/pgtable-book3s64.c b/arch/powerpc/mm/pgtable-book3s64.c index c1f4ca45c93a..4afbfbb64bfd 100644 --- a/arch/powerpc/mm/pgtable-book3s64.c +++ b/arch/powerpc/mm/pgtable-book3s64.c @@ -409,6 +409,18 @@ static inline void pgtable_free(void *table, int index) case PUD_INDEX: kmem_cache_free(PGT_CACHE(PUD_CACHE_INDEX), table); break; +#if defined(CONFIG_PPC_4K_PAGES) && defined(CONFIG_HUGETLB_PAGE) + /* 16M hugepd directory at pud level */ + case HTLB_16M_INDEX: + BUILD_BUG_ON(H_16M_CACHE_INDEX <= 0); + kmem_cache_free(PGT_CACHE(H_16M_CACHE_INDEX), table); + break; + /* 16G hugepd directory at the pgd level */ + case HTLB_16G_INDEX: + BUILD_BUG_ON(H_16G_CACHE_INDEX <= 0); + kmem_cache_free(PGT_CACHE(H_16G_CACHE_INDEX), table); + break; +#endif /* We don't free pgd table via RCU callback */ default: BUG(); diff --git a/arch/powerpc/mm/subpage-prot.c b/arch/powerpc/mm/subpage-prot.c index 75cb646a79c3..9d16ee251fc0 100644 --- a/arch/powerpc/mm/subpage-prot.c +++ b/arch/powerpc/mm/subpage-prot.c @@ -186,9 +186,6 @@ static void subpage_mark_vma_nohuge(struct mm_struct *mm, unsigned long addr, * in a 2-bit field won't allow writes to a page that is otherwise * write-protected. */ -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wpragmas" -#pragma GCC diagnostic ignored "-Wattribute-alias" SYSCALL_DEFINE3(subpage_prot, unsigned long, addr, unsigned long, len, u32 __user *, map) { @@ -272,4 +269,3 @@ SYSCALL_DEFINE3(subpage_prot, unsigned long, addr, up_write(&mm->mmap_sem); return err; } -#pragma GCC diagnostic pop diff --git a/arch/powerpc/mm/tlb-radix.c b/arch/powerpc/mm/tlb-radix.c index 67a6e86d3e7e..1135b43a597c 100644 --- a/arch/powerpc/mm/tlb-radix.c +++ b/arch/powerpc/mm/tlb-radix.c @@ -689,22 +689,17 @@ EXPORT_SYMBOL(radix__flush_tlb_kernel_range); static unsigned long tlb_single_page_flush_ceiling __read_mostly = 33; static unsigned long tlb_local_single_page_flush_ceiling __read_mostly = POWER9_TLB_SETS_RADIX * 2; -void radix__flush_tlb_range(struct vm_area_struct *vma, unsigned long start, - unsigned long end) +static inline void __radix__flush_tlb_range(struct mm_struct *mm, + unsigned long start, unsigned long end, + bool flush_all_sizes) { - struct mm_struct *mm = vma->vm_mm; unsigned long pid; unsigned int page_shift = mmu_psize_defs[mmu_virtual_psize].shift; unsigned long page_size = 1UL << page_shift; unsigned long nr_pages = (end - start) >> page_shift; bool local, full; -#ifdef CONFIG_HUGETLB_PAGE - if (is_vm_hugetlb_page(vma)) - return radix__flush_hugetlb_tlb_range(vma, start, end); -#endif - pid = mm->context.id; if (unlikely(pid == MMU_NO_CONTEXT)) return; @@ -738,37 +733,64 @@ is_local: _tlbie_pid(pid, RIC_FLUSH_TLB); } } else { - bool hflush = false; + bool hflush = flush_all_sizes; + bool gflush = flush_all_sizes; unsigned long hstart, hend; + unsigned long gstart, gend; -#ifdef CONFIG_TRANSPARENT_HUGEPAGE - hstart = (start + HPAGE_PMD_SIZE - 1) >> HPAGE_PMD_SHIFT; - hend = end >> HPAGE_PMD_SHIFT; - if (hstart < hend) { - hstart <<= HPAGE_PMD_SHIFT; - hend <<= HPAGE_PMD_SHIFT; + if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE)) hflush = true; + + if (hflush) { + hstart = (start + PMD_SIZE - 1) & PMD_MASK; + hend = end & PMD_MASK; + if (hstart == hend) + hflush = false; + } + + if (gflush) { + gstart = (start + PUD_SIZE - 1) & PUD_MASK; + gend = end & PUD_MASK; + if (gstart == gend) + gflush = false; } -#endif asm volatile("ptesync": : :"memory"); if (local) { __tlbiel_va_range(start, end, pid, page_size, mmu_virtual_psize); if (hflush) __tlbiel_va_range(hstart, hend, pid, - HPAGE_PMD_SIZE, MMU_PAGE_2M); + PMD_SIZE, MMU_PAGE_2M); + if (gflush) + __tlbiel_va_range(gstart, gend, pid, + PUD_SIZE, MMU_PAGE_1G); asm volatile("ptesync": : :"memory"); } else { __tlbie_va_range(start, end, pid, page_size, mmu_virtual_psize); if (hflush) __tlbie_va_range(hstart, hend, pid, - HPAGE_PMD_SIZE, MMU_PAGE_2M); + PMD_SIZE, MMU_PAGE_2M); + if (gflush) + __tlbie_va_range(gstart, gend, pid, + PUD_SIZE, MMU_PAGE_1G); fixup_tlbie(); asm volatile("eieio; tlbsync; ptesync": : :"memory"); } } preempt_enable(); } + +void radix__flush_tlb_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end) + +{ +#ifdef CONFIG_HUGETLB_PAGE + if (is_vm_hugetlb_page(vma)) + return radix__flush_hugetlb_tlb_range(vma, start, end); +#endif + + __radix__flush_tlb_range(vma->vm_mm, start, end, false); +} EXPORT_SYMBOL(radix__flush_tlb_range); static int radix_get_mmu_psize(int page_size) @@ -837,6 +859,8 @@ void radix__tlb_flush(struct mmu_gather *tlb) int psize = 0; struct mm_struct *mm = tlb->mm; int page_size = tlb->page_size; + unsigned long start = tlb->start; + unsigned long end = tlb->end; /* * if page size is not something we understand, do a full mm flush @@ -847,15 +871,45 @@ void radix__tlb_flush(struct mmu_gather *tlb) */ if (tlb->fullmm) { __flush_all_mm(mm, true); +#if defined(CONFIG_TRANSPARENT_HUGEPAGE) || defined(CONFIG_HUGETLB_PAGE) + } else if (mm_tlb_flush_nested(mm)) { + /* + * If there is a concurrent invalidation that is clearing ptes, + * then it's possible this invalidation will miss one of those + * cleared ptes and miss flushing the TLB. If this invalidate + * returns before the other one flushes TLBs, that can result + * in it returning while there are still valid TLBs inside the + * range to be invalidated. + * + * See mm/memory.c:tlb_finish_mmu() for more details. + * + * The solution to this is ensure the entire range is always + * flushed here. The problem for powerpc is that the flushes + * are page size specific, so this "forced flush" would not + * do the right thing if there are a mix of page sizes in + * the range to be invalidated. So use __flush_tlb_range + * which invalidates all possible page sizes in the range. + * + * PWC flush probably is not be required because the core code + * shouldn't free page tables in this path, but accounting + * for the possibility makes us a bit more robust. + * + * need_flush_all is an uncommon case because page table + * teardown should be done with exclusive locks held (but + * after locks are dropped another invalidate could come + * in), it could be optimized further if necessary. + */ + if (!tlb->need_flush_all) + __radix__flush_tlb_range(mm, start, end, true); + else + radix__flush_all_mm(mm); +#endif } else if ( (psize = radix_get_mmu_psize(page_size)) == -1) { if (!tlb->need_flush_all) radix__flush_tlb_mm(mm); else radix__flush_all_mm(mm); } else { - unsigned long start = tlb->start; - unsigned long end = tlb->end; - if (!tlb->need_flush_all) radix__flush_tlb_range_psize(mm, start, end, psize); else @@ -1043,6 +1097,8 @@ extern void radix_kvm_prefetch_workaround(struct mm_struct *mm) for (; sib <= cpu_last_thread_sibling(cpu) && !flush; sib++) { if (sib == cpu) continue; + if (!cpu_possible(sib)) + continue; if (paca_ptrs[sib]->kvm_hstate.kvm_vcpu) flush = true; } diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c index 7c968e46736f..12e6e4d30602 100644 --- a/arch/powerpc/platforms/powermac/time.c +++ b/arch/powerpc/platforms/powermac/time.c @@ -42,7 +42,11 @@ #define DBG(x...) #endif -/* Apparently the RTC stores seconds since 1 Jan 1904 */ +/* + * Offset between Unix time (1970-based) and Mac time (1904-based). Cuda and PMU + * times wrap in 2040. If we need to handle later times, the read_time functions + * need to be changed to interpret wrapped times as post-2040. + */ #define RTC_OFFSET 2082844800 /* @@ -97,8 +101,11 @@ static time64_t cuda_get_time(void) if (req.reply_len != 7) printk(KERN_ERR "cuda_get_time: got %d byte reply\n", req.reply_len); - now = (req.reply[3] << 24) + (req.reply[4] << 16) - + (req.reply[5] << 8) + req.reply[6]; + now = (u32)((req.reply[3] << 24) + (req.reply[4] << 16) + + (req.reply[5] << 8) + req.reply[6]); + /* it's either after year 2040, or the RTC has gone backwards */ + WARN_ON(now < RTC_OFFSET); + return now - RTC_OFFSET; } @@ -106,10 +113,10 @@ static time64_t cuda_get_time(void) static int cuda_set_rtc_time(struct rtc_time *tm) { - time64_t nowtime; + u32 nowtime; struct adb_request req; - nowtime = rtc_tm_to_time64(tm) + RTC_OFFSET; + nowtime = lower_32_bits(rtc_tm_to_time64(tm) + RTC_OFFSET); if (cuda_request(&req, NULL, 6, CUDA_PACKET, CUDA_SET_TIME, nowtime >> 24, nowtime >> 16, nowtime >> 8, nowtime) < 0) @@ -140,8 +147,12 @@ static time64_t pmu_get_time(void) if (req.reply_len != 4) printk(KERN_ERR "pmu_get_time: got %d byte reply from PMU\n", req.reply_len); - now = (req.reply[0] << 24) + (req.reply[1] << 16) - + (req.reply[2] << 8) + req.reply[3]; + now = (u32)((req.reply[0] << 24) + (req.reply[1] << 16) + + (req.reply[2] << 8) + req.reply[3]); + + /* it's either after year 2040, or the RTC has gone backwards */ + WARN_ON(now < RTC_OFFSET); + return now - RTC_OFFSET; } @@ -149,10 +160,10 @@ static time64_t pmu_get_time(void) static int pmu_set_rtc_time(struct rtc_time *tm) { - time64_t nowtime; + u32 nowtime; struct adb_request req; - nowtime = rtc_tm_to_time64(tm) + RTC_OFFSET; + nowtime = lower_32_bits(rtc_tm_to_time64(tm) + RTC_OFFSET); if (pmu_request(&req, NULL, 5, PMU_SET_RTC, nowtime >> 24, nowtime >> 16, nowtime >> 8, nowtime) < 0) return -ENXIO; diff --git a/arch/s390/include/asm/css_chars.h b/arch/s390/include/asm/css_chars.h index 0563fd3e8458..480bb02ccacd 100644 --- a/arch/s390/include/asm/css_chars.h +++ b/arch/s390/include/asm/css_chars.h @@ -6,36 +6,38 @@ struct css_general_char { u64 : 12; - u32 dynio : 1; /* bit 12 */ - u32 : 4; - u32 eadm : 1; /* bit 17 */ - u32 : 23; - u32 aif : 1; /* bit 41 */ - u32 : 3; - u32 mcss : 1; /* bit 45 */ - u32 fcs : 1; /* bit 46 */ - u32 : 1; - u32 ext_mb : 1; /* bit 48 */ - u32 : 7; - u32 aif_tdd : 1; /* bit 56 */ - u32 : 1; - u32 qebsm : 1; /* bit 58 */ - u32 : 2; - u32 aiv : 1; /* bit 61 */ - u32 : 5; - u32 aif_osa : 1; /* bit 67 */ - u32 : 12; - u32 eadm_rf : 1; /* bit 80 */ - u32 : 1; - u32 cib : 1; /* bit 82 */ - u32 : 5; - u32 fcx : 1; /* bit 88 */ - u32 : 19; - u32 alt_ssi : 1; /* bit 108 */ - u32 : 1; - u32 narf : 1; /* bit 110 */ - u32 : 12; - u32 util_str : 1;/* bit 123 */ + u64 dynio : 1; /* bit 12 */ + u64 : 4; + u64 eadm : 1; /* bit 17 */ + u64 : 23; + u64 aif : 1; /* bit 41 */ + u64 : 3; + u64 mcss : 1; /* bit 45 */ + u64 fcs : 1; /* bit 46 */ + u64 : 1; + u64 ext_mb : 1; /* bit 48 */ + u64 : 7; + u64 aif_tdd : 1; /* bit 56 */ + u64 : 1; + u64 qebsm : 1; /* bit 58 */ + u64 : 2; + u64 aiv : 1; /* bit 61 */ + u64 : 2; + + u64 : 3; + u64 aif_osa : 1; /* bit 67 */ + u64 : 12; + u64 eadm_rf : 1; /* bit 80 */ + u64 : 1; + u64 cib : 1; /* bit 82 */ + u64 : 5; + u64 fcx : 1; /* bit 88 */ + u64 : 19; + u64 alt_ssi : 1; /* bit 108 */ + u64 : 1; + u64 narf : 1; /* bit 110 */ + u64 : 12; + u64 util_str : 1;/* bit 123 */ } __packed; extern struct css_general_char css_general_characteristics; diff --git a/arch/x86/Makefile b/arch/x86/Makefile index f0a6ea22429d..a08e82856563 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -258,11 +258,6 @@ archscripts: scripts_basic archheaders: $(Q)$(MAKE) $(build)=arch/x86/entry/syscalls all -archprepare: -ifeq ($(CONFIG_KEXEC_FILE),y) - $(Q)$(MAKE) $(build)=arch/x86/purgatory arch/x86/purgatory/kexec-purgatory.c -endif - ### # Kernel objects @@ -327,7 +322,6 @@ archclean: $(Q)rm -rf $(objtree)/arch/x86_64 $(Q)$(MAKE) $(clean)=$(boot) $(Q)$(MAKE) $(clean)=arch/x86/tools - $(Q)$(MAKE) $(clean)=arch/x86/purgatory define archhelp echo '* bzImage - Compressed kernel image (arch/x86/boot/bzImage)' diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c index a8a8642d2b0b..e57665b4ba1c 100644 --- a/arch/x86/boot/compressed/eboot.c +++ b/arch/x86/boot/compressed/eboot.c @@ -118,7 +118,7 @@ __setup_efi_pci(efi_pci_io_protocol_t *pci, struct pci_setup_rom **__rom) void *romimage; status = efi_call_proto(efi_pci_io_protocol, attributes, pci, - EfiPciIoAttributeOperationGet, 0, 0, + EfiPciIoAttributeOperationGet, 0ULL, &attributes); if (status != EFI_SUCCESS) return status; diff --git a/arch/x86/entry/common.c b/arch/x86/entry/common.c index 92190879b228..3b2490b81918 100644 --- a/arch/x86/entry/common.c +++ b/arch/x86/entry/common.c @@ -164,7 +164,7 @@ static void exit_to_usermode_loop(struct pt_regs *regs, u32 cached_flags) if (cached_flags & _TIF_NOTIFY_RESUME) { clear_thread_flag(TIF_NOTIFY_RESUME); tracehook_notify_resume(regs); - rseq_handle_notify_resume(regs); + rseq_handle_notify_resume(NULL, regs); } if (cached_flags & _TIF_USER_RETURN_NOTIFY) diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S index 2582881d19ce..c371bfee137a 100644 --- a/arch/x86/entry/entry_32.S +++ b/arch/x86/entry/entry_32.S @@ -477,7 +477,7 @@ ENTRY(entry_SYSENTER_32) * whereas POPF does not.) */ addl $PT_EFLAGS-PT_DS, %esp /* point esp at pt_regs->flags */ - btr $X86_EFLAGS_IF_BIT, (%esp) + btrl $X86_EFLAGS_IF_BIT, (%esp) popfl /* diff --git a/arch/x86/entry/entry_64_compat.S b/arch/x86/entry/entry_64_compat.S index 9de7f1e1dede..7d0df78db727 100644 --- a/arch/x86/entry/entry_64_compat.S +++ b/arch/x86/entry/entry_64_compat.S @@ -84,13 +84,13 @@ ENTRY(entry_SYSENTER_compat) pushq %rdx /* pt_regs->dx */ pushq %rcx /* pt_regs->cx */ pushq $-ENOSYS /* pt_regs->ax */ - pushq %r8 /* pt_regs->r8 */ + pushq $0 /* pt_regs->r8 = 0 */ xorl %r8d, %r8d /* nospec r8 */ - pushq %r9 /* pt_regs->r9 */ + pushq $0 /* pt_regs->r9 = 0 */ xorl %r9d, %r9d /* nospec r9 */ - pushq %r10 /* pt_regs->r10 */ + pushq $0 /* pt_regs->r10 = 0 */ xorl %r10d, %r10d /* nospec r10 */ - pushq %r11 /* pt_regs->r11 */ + pushq $0 /* pt_regs->r11 = 0 */ xorl %r11d, %r11d /* nospec r11 */ pushq %rbx /* pt_regs->rbx */ xorl %ebx, %ebx /* nospec rbx */ @@ -374,13 +374,13 @@ ENTRY(entry_INT80_compat) pushq %rcx /* pt_regs->cx */ xorl %ecx, %ecx /* nospec cx */ pushq $-ENOSYS /* pt_regs->ax */ - pushq $0 /* pt_regs->r8 = 0 */ + pushq %r8 /* pt_regs->r8 */ xorl %r8d, %r8d /* nospec r8 */ - pushq $0 /* pt_regs->r9 = 0 */ + pushq %r9 /* pt_regs->r9 */ xorl %r9d, %r9d /* nospec r9 */ - pushq $0 /* pt_regs->r10 = 0 */ + pushq %r10 /* pt_regs->r10*/ xorl %r10d, %r10d /* nospec r10 */ - pushq $0 /* pt_regs->r11 = 0 */ + pushq %r11 /* pt_regs->r11 */ xorl %r11d, %r11d /* nospec r11 */ pushq %rbx /* pt_regs->rbx */ xorl %ebx, %ebx /* nospec rbx */ diff --git a/arch/x86/include/asm/barrier.h b/arch/x86/include/asm/barrier.h index 042b5e892ed1..14de0432d288 100644 --- a/arch/x86/include/asm/barrier.h +++ b/arch/x86/include/asm/barrier.h @@ -38,7 +38,7 @@ static inline unsigned long array_index_mask_nospec(unsigned long index, { unsigned long mask; - asm ("cmp %1,%2; sbb %0,%0;" + asm volatile ("cmp %1,%2; sbb %0,%0;" :"=r" (mask) :"g"(size),"r" (index) :"cc"); diff --git a/arch/x86/include/asm/pgalloc.h b/arch/x86/include/asm/pgalloc.h index ada6410fd2ec..fbd578daa66e 100644 --- a/arch/x86/include/asm/pgalloc.h +++ b/arch/x86/include/asm/pgalloc.h @@ -184,6 +184,9 @@ static inline p4d_t *p4d_alloc_one(struct mm_struct *mm, unsigned long addr) static inline void p4d_free(struct mm_struct *mm, p4d_t *p4d) { + if (!pgtable_l5_enabled()) + return; + BUG_ON((unsigned long)p4d & (PAGE_SIZE-1)); free_page((unsigned long)p4d); } diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h index 99ecde23c3ec..5715647fc4fe 100644 --- a/arch/x86/include/asm/pgtable.h +++ b/arch/x86/include/asm/pgtable.h @@ -898,7 +898,7 @@ static inline unsigned long pgd_page_vaddr(pgd_t pgd) #define pgd_page(pgd) pfn_to_page(pgd_pfn(pgd)) /* to find an entry in a page-table-directory. */ -static __always_inline p4d_t *p4d_offset(pgd_t *pgd, unsigned long address) +static inline p4d_t *p4d_offset(pgd_t *pgd, unsigned long address) { if (!pgtable_l5_enabled()) return (p4d_t *)pgd; diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h index 0fdcd21dadbd..3c5385f9a88f 100644 --- a/arch/x86/include/asm/pgtable_64.h +++ b/arch/x86/include/asm/pgtable_64.h @@ -216,7 +216,7 @@ static inline pgd_t pti_set_user_pgd(pgd_t *pgdp, pgd_t pgd) } #endif -static __always_inline void native_set_p4d(p4d_t *p4dp, p4d_t p4d) +static inline void native_set_p4d(p4d_t *p4dp, p4d_t p4d) { pgd_t pgd; @@ -230,7 +230,7 @@ static __always_inline void native_set_p4d(p4d_t *p4dp, p4d_t p4d) *p4dp = native_make_p4d(native_pgd_val(pgd)); } -static __always_inline void native_p4d_clear(p4d_t *p4d) +static inline void native_p4d_clear(p4d_t *p4d) { native_set_p4d(p4d, native_make_p4d(0)); } diff --git a/arch/x86/include/asm/vmx.h b/arch/x86/include/asm/vmx.h index 425e6b8b9547..6aa8499e1f62 100644 --- a/arch/x86/include/asm/vmx.h +++ b/arch/x86/include/asm/vmx.h @@ -114,6 +114,7 @@ #define VMX_MISC_PREEMPTION_TIMER_RATE_MASK 0x0000001f #define VMX_MISC_SAVE_EFER_LMA 0x00000020 #define VMX_MISC_ACTIVITY_HLT 0x00000040 +#define VMX_MISC_ZERO_LEN_INS 0x40000000 /* VMFUNC functions */ #define VMX_VMFUNC_EPTP_SWITCHING 0x00000001 @@ -351,11 +352,13 @@ enum vmcs_field { #define VECTORING_INFO_VALID_MASK INTR_INFO_VALID_MASK #define INTR_TYPE_EXT_INTR (0 << 8) /* external interrupt */ +#define INTR_TYPE_RESERVED (1 << 8) /* reserved */ #define INTR_TYPE_NMI_INTR (2 << 8) /* NMI */ #define INTR_TYPE_HARD_EXCEPTION (3 << 8) /* processor exception */ #define INTR_TYPE_SOFT_INTR (4 << 8) /* software interrupt */ #define INTR_TYPE_PRIV_SW_EXCEPTION (5 << 8) /* ICE breakpoint - undocumented */ #define INTR_TYPE_SOFT_EXCEPTION (6 << 8) /* software exception */ +#define INTR_TYPE_OTHER_EVENT (7 << 8) /* other event */ /* GUEST_INTERRUPTIBILITY_INFO flags. */ #define GUEST_INTR_STATE_STI 0x00000001 diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index efaf2d4f9c3c..d492752f79e1 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -26,6 +26,7 @@ #include <linux/delay.h> #include <linux/crash_dump.h> #include <linux/reboot.h> +#include <linux/memory.h> #include <asm/uv/uv_mmrs.h> #include <asm/uv/uv_hub.h> @@ -392,6 +393,51 @@ extern int uv_hub_info_version(void) } EXPORT_SYMBOL(uv_hub_info_version); +/* Default UV memory block size is 2GB */ +static unsigned long mem_block_size = (2UL << 30); + +/* Kernel parameter to specify UV mem block size */ +static int parse_mem_block_size(char *ptr) +{ + unsigned long size = memparse(ptr, NULL); + + /* Size will be rounded down by set_block_size() below */ + mem_block_size = size; + return 0; +} +early_param("uv_memblksize", parse_mem_block_size); + +static __init int adj_blksize(u32 lgre) +{ + unsigned long base = (unsigned long)lgre << UV_GAM_RANGE_SHFT; + unsigned long size; + + for (size = mem_block_size; size > MIN_MEMORY_BLOCK_SIZE; size >>= 1) + if (IS_ALIGNED(base, size)) + break; + + if (size >= mem_block_size) + return 0; + + mem_block_size = size; + return 1; +} + +static __init void set_block_size(void) +{ + unsigned int order = ffs(mem_block_size); + + if (order) { + /* adjust for ffs return of 1..64 */ + set_memory_block_size_order(order - 1); + pr_info("UV: mem_block_size set to 0x%lx\n", mem_block_size); + } else { + /* bad or zero value, default to 1UL << 31 (2GB) */ + pr_err("UV: mem_block_size error with 0x%lx\n", mem_block_size); + set_memory_block_size_order(31); + } +} + /* Build GAM range lookup table: */ static __init void build_uv_gr_table(void) { @@ -1180,23 +1226,30 @@ static void __init decode_gam_rng_tbl(unsigned long ptr) << UV_GAM_RANGE_SHFT); int order = 0; char suffix[] = " KMGTPE"; + int flag = ' '; while (size > 9999 && order < sizeof(suffix)) { size /= 1024; order++; } + /* adjust max block size to current range start */ + if (gre->type == 1 || gre->type == 2) + if (adj_blksize(lgre)) + flag = '*'; + if (!index) { pr_info("UV: GAM Range Table...\n"); - pr_info("UV: # %20s %14s %5s %4s %5s %3s %2s\n", "Range", "", "Size", "Type", "NASID", "SID", "PN"); + pr_info("UV: # %20s %14s %6s %4s %5s %3s %2s\n", "Range", "", "Size", "Type", "NASID", "SID", "PN"); } - pr_info("UV: %2d: 0x%014lx-0x%014lx %5lu%c %3d %04x %02x %02x\n", + pr_info("UV: %2d: 0x%014lx-0x%014lx%c %5lu%c %3d %04x %02x %02x\n", index++, (unsigned long)lgre << UV_GAM_RANGE_SHFT, (unsigned long)gre->limit << UV_GAM_RANGE_SHFT, - size, suffix[order], + flag, size, suffix[order], gre->type, gre->nasid, gre->sockid, gre->pnode); + /* update to next range start */ lgre = gre->limit; if (sock_min > gre->sockid) sock_min = gre->sockid; @@ -1427,6 +1480,7 @@ static void __init uv_system_init_hub(void) build_socket_tables(); build_uv_gr_table(); + set_block_size(); uv_init_hub_info(&hub_info); uv_possible_blades = num_possible_nodes(); if (!_node_to_pnode) diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c index cd0fda1fff6d..404df26b7de8 100644 --- a/arch/x86/kernel/cpu/bugs.c +++ b/arch/x86/kernel/cpu/bugs.c @@ -27,6 +27,7 @@ #include <asm/pgtable.h> #include <asm/set_memory.h> #include <asm/intel-family.h> +#include <asm/hypervisor.h> static void __init spectre_v2_select_mitigation(void); static void __init ssb_select_mitigation(void); @@ -664,6 +665,9 @@ static ssize_t cpu_show_common(struct device *dev, struct device_attribute *attr if (boot_cpu_has(X86_FEATURE_PTI)) return sprintf(buf, "Mitigation: PTI\n"); + if (hypervisor_is_type(X86_HYPER_XEN_PV)) + return sprintf(buf, "Unknown (XEN PV detected, hypervisor mitigation required)\n"); + break; case X86_BUG_SPECTRE_V1: diff --git a/arch/x86/kernel/cpu/cacheinfo.c b/arch/x86/kernel/cpu/cacheinfo.c index 38354c66df81..0c5fcbd998cf 100644 --- a/arch/x86/kernel/cpu/cacheinfo.c +++ b/arch/x86/kernel/cpu/cacheinfo.c @@ -671,7 +671,7 @@ void cacheinfo_amd_init_llc_id(struct cpuinfo_x86 *c, int cpu, u8 node_id) num_sharing_cache = ((eax >> 14) & 0xfff) + 1; if (num_sharing_cache) { - int bits = get_count_order(num_sharing_cache) - 1; + int bits = get_count_order(num_sharing_cache); per_cpu(cpu_llc_id, cpu) = c->apicid >> bits; } diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 0df7151cfef4..eb4cb3efd20e 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -1,3 +1,6 @@ +/* cpu_feature_enabled() cannot be used this early */ +#define USE_EARLY_PGTABLE_L5 + #include <linux/bootmem.h> #include <linux/linkage.h> #include <linux/bitops.h> diff --git a/arch/x86/kernel/cpu/mcheck/mce-severity.c b/arch/x86/kernel/cpu/mcheck/mce-severity.c index 5bbd06f38ff6..f34d89c01edc 100644 --- a/arch/x86/kernel/cpu/mcheck/mce-severity.c +++ b/arch/x86/kernel/cpu/mcheck/mce-severity.c @@ -160,6 +160,11 @@ static struct severity { SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCI_ADDR|MCACOD, MCI_UC_SAR|MCI_ADDR|MCACOD_INSTR), USER ), + MCESEV( + PANIC, "Data load in unrecoverable area of kernel", + SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCI_ADDR|MCACOD, MCI_UC_SAR|MCI_ADDR|MCACOD_DATA), + KERNEL + ), #endif MCESEV( PANIC, "Action required: unknown MCACOD", diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index e4cf6ff1c2e1..c102ad51025e 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -772,23 +772,25 @@ EXPORT_SYMBOL_GPL(machine_check_poll); static int mce_no_way_out(struct mce *m, char **msg, unsigned long *validp, struct pt_regs *regs) { - int i, ret = 0; char *tmp; + int i; for (i = 0; i < mca_cfg.banks; i++) { m->status = mce_rdmsrl(msr_ops.status(i)); - if (m->status & MCI_STATUS_VAL) { - __set_bit(i, validp); - if (quirk_no_way_out) - quirk_no_way_out(i, m, regs); - } + if (!(m->status & MCI_STATUS_VAL)) + continue; + + __set_bit(i, validp); + if (quirk_no_way_out) + quirk_no_way_out(i, m, regs); if (mce_severity(m, mca_cfg.tolerant, &tmp, true) >= MCE_PANIC_SEVERITY) { + mce_read_aux(m, i); *msg = tmp; - ret = 1; + return 1; } } - return ret; + return 0; } /* @@ -1205,13 +1207,18 @@ void do_machine_check(struct pt_regs *regs, long error_code) lmce = m.mcgstatus & MCG_STATUS_LMCES; /* + * Local machine check may already know that we have to panic. + * Broadcast machine check begins rendezvous in mce_start() * Go through all banks in exclusion of the other CPUs. This way we * don't report duplicated events on shared banks because the first one - * to see it will clear it. If this is a Local MCE, then no need to - * perform rendezvous. + * to see it will clear it. */ - if (!lmce) + if (lmce) { + if (no_way_out) + mce_panic("Fatal local machine check", &m, msg); + } else { order = mce_start(&no_way_out); + } for (i = 0; i < cfg->banks; i++) { __clear_bit(i, toclear); @@ -1287,12 +1294,17 @@ void do_machine_check(struct pt_regs *regs, long error_code) no_way_out = worst >= MCE_PANIC_SEVERITY; } else { /* - * Local MCE skipped calling mce_reign() - * If we found a fatal error, we need to panic here. + * If there was a fatal machine check we should have + * already called mce_panic earlier in this function. + * Since we re-read the banks, we might have found + * something new. Check again to see if we found a + * fatal error. We call "mce_severity()" again to + * make sure we have the right "msg". */ - if (worst >= MCE_PANIC_SEVERITY && mca_cfg.tolerant < 3) - mce_panic("Machine check from unknown source", - NULL, NULL); + if (worst >= MCE_PANIC_SEVERITY && mca_cfg.tolerant < 3) { + mce_severity(&m, cfg->tolerant, &msg, true); + mce_panic("Local fatal machine check!", &m, msg); + } } /* diff --git a/arch/x86/kernel/cpu/microcode/intel.c b/arch/x86/kernel/cpu/microcode/intel.c index 1c2cfa0644aa..97ccf4c3b45b 100644 --- a/arch/x86/kernel/cpu/microcode/intel.c +++ b/arch/x86/kernel/cpu/microcode/intel.c @@ -190,8 +190,11 @@ static void save_microcode_patch(void *data, unsigned int size) p = memdup_patch(data, size); if (!p) pr_err("Error allocating buffer %p\n", data); - else + else { list_replace(&iter->plist, &p->plist); + kfree(iter->data); + kfree(iter); + } } } diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index d1f25c831447..c88c23c658c1 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -1248,6 +1248,7 @@ void __init e820__memblock_setup(void) { int i; u64 end; + u64 addr = 0; /* * The bootstrap memblock region count maximum is 128 entries @@ -1264,13 +1265,21 @@ void __init e820__memblock_setup(void) struct e820_entry *entry = &e820_table->entries[i]; end = entry->addr + entry->size; + if (addr < entry->addr) + memblock_reserve(addr, entry->addr - addr); + addr = end; if (end != (resource_size_t)end) continue; + /* + * all !E820_TYPE_RAM ranges (including gap ranges) are put + * into memblock.reserved to make sure that struct pages in + * such regions are not left uninitialized after bootup. + */ if (entry->type != E820_TYPE_RAM && entry->type != E820_TYPE_RESERVED_KERN) - continue; - - memblock_add(entry->addr, entry->size); + memblock_reserve(entry->addr, entry->size); + else + memblock_add(entry->addr, entry->size); } /* Throw away partial pages: */ diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c index a21d6ace648e..8047379e575a 100644 --- a/arch/x86/kernel/head64.c +++ b/arch/x86/kernel/head64.c @@ -44,7 +44,7 @@ static unsigned int __initdata next_early_pgt; pmdval_t early_pmd_flags = __PAGE_KERNEL_LARGE & ~(_PAGE_GLOBAL | _PAGE_NX); #ifdef CONFIG_X86_5LEVEL -unsigned int __pgtable_l5_enabled __initdata; +unsigned int __pgtable_l5_enabled __ro_after_init; unsigned int pgdir_shift __ro_after_init = 39; EXPORT_SYMBOL(pgdir_shift); unsigned int ptrs_per_p4d __ro_after_init = 1; diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c index 697a4ce04308..736348ead421 100644 --- a/arch/x86/kernel/quirks.c +++ b/arch/x86/kernel/quirks.c @@ -645,12 +645,19 @@ static void quirk_intel_brickland_xeon_ras_cap(struct pci_dev *pdev) /* Skylake */ static void quirk_intel_purley_xeon_ras_cap(struct pci_dev *pdev) { - u32 capid0; + u32 capid0, capid5; pci_read_config_dword(pdev, 0x84, &capid0); + pci_read_config_dword(pdev, 0x98, &capid5); - if ((capid0 & 0xc0) == 0xc0) + /* + * CAPID0{7:6} indicate whether this is an advanced RAS SKU + * CAPID5{8:5} indicate that various NVDIMM usage modes are + * enabled, so memory machine check recovery is also enabled. + */ + if ((capid0 & 0xc0) == 0xc0 || (capid5 & 0x1e0)) static_branch_inc(&mcsafe_key); + } DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x0ec3, quirk_intel_brickland_xeon_ras_cap); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2fc0, quirk_intel_brickland_xeon_ras_cap); diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c index 445ca11ff863..92a3b312a53c 100644 --- a/arch/x86/kernel/signal.c +++ b/arch/x86/kernel/signal.c @@ -692,7 +692,7 @@ setup_rt_frame(struct ksignal *ksig, struct pt_regs *regs) * Increment event counter and perform fixup for the pre-signal * frame. */ - rseq_signal_deliver(regs); + rseq_signal_deliver(ksig, regs); /* Set up the stack frame */ if (is_ia32_frame(ksig)) { diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index a535dd64de63..e6db475164ed 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -835,16 +835,18 @@ static void math_error(struct pt_regs *regs, int error_code, int trapnr) char *str = (trapnr == X86_TRAP_MF) ? "fpu exception" : "simd exception"; - if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, SIGFPE) == NOTIFY_STOP) - return; cond_local_irq_enable(regs); if (!user_mode(regs)) { - if (!fixup_exception(regs, trapnr)) { - task->thread.error_code = error_code; - task->thread.trap_nr = trapnr; + if (fixup_exception(regs, trapnr)) + return; + + task->thread.error_code = error_code; + task->thread.trap_nr = trapnr; + + if (notify_die(DIE_TRAP, str, regs, error_code, + trapnr, SIGFPE) != NOTIFY_STOP) die(str, regs, error_code); - } return; } diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c index 58d8d800875d..deb576b23b7c 100644 --- a/arch/x86/kernel/uprobes.c +++ b/arch/x86/kernel/uprobes.c @@ -293,7 +293,7 @@ static int uprobe_init_insn(struct arch_uprobe *auprobe, struct insn *insn, bool insn_init(insn, auprobe->insn, sizeof(auprobe->insn), x86_64); /* has the side-effect of processing the entire instruction */ insn_get_length(insn); - if (WARN_ON_ONCE(!insn_complete(insn))) + if (!insn_complete(insn)) return -ENOEXEC; if (is_prefix_bad(insn)) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 559a12b6184d..1689f433f3a0 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -1705,6 +1705,17 @@ static inline bool nested_cpu_has_vmwrite_any_field(struct kvm_vcpu *vcpu) MSR_IA32_VMX_MISC_VMWRITE_SHADOW_RO_FIELDS; } +static inline bool nested_cpu_has_zero_length_injection(struct kvm_vcpu *vcpu) +{ + return to_vmx(vcpu)->nested.msrs.misc_low & VMX_MISC_ZERO_LEN_INS; +} + +static inline bool nested_cpu_supports_monitor_trap_flag(struct kvm_vcpu *vcpu) +{ + return to_vmx(vcpu)->nested.msrs.procbased_ctls_high & + CPU_BASED_MONITOR_TRAP_FLAG; +} + static inline bool nested_cpu_has(struct vmcs12 *vmcs12, u32 bit) { return vmcs12->cpu_based_vm_exec_control & bit; @@ -11620,6 +11631,62 @@ static int check_vmentry_prereqs(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12) !nested_cr3_valid(vcpu, vmcs12->host_cr3)) return VMXERR_ENTRY_INVALID_HOST_STATE_FIELD; + /* + * From the Intel SDM, volume 3: + * Fields relevant to VM-entry event injection must be set properly. + * These fields are the VM-entry interruption-information field, the + * VM-entry exception error code, and the VM-entry instruction length. + */ + if (vmcs12->vm_entry_intr_info_field & INTR_INFO_VALID_MASK) { + u32 intr_info = vmcs12->vm_entry_intr_info_field; + u8 vector = intr_info & INTR_INFO_VECTOR_MASK; + u32 intr_type = intr_info & INTR_INFO_INTR_TYPE_MASK; + bool has_error_code = intr_info & INTR_INFO_DELIVER_CODE_MASK; + bool should_have_error_code; + bool urg = nested_cpu_has2(vmcs12, + SECONDARY_EXEC_UNRESTRICTED_GUEST); + bool prot_mode = !urg || vmcs12->guest_cr0 & X86_CR0_PE; + + /* VM-entry interruption-info field: interruption type */ + if (intr_type == INTR_TYPE_RESERVED || + (intr_type == INTR_TYPE_OTHER_EVENT && + !nested_cpu_supports_monitor_trap_flag(vcpu))) + return VMXERR_ENTRY_INVALID_CONTROL_FIELD; + + /* VM-entry interruption-info field: vector */ + if ((intr_type == INTR_TYPE_NMI_INTR && vector != NMI_VECTOR) || + (intr_type == INTR_TYPE_HARD_EXCEPTION && vector > 31) || + (intr_type == INTR_TYPE_OTHER_EVENT && vector != 0)) + return VMXERR_ENTRY_INVALID_CONTROL_FIELD; + + /* VM-entry interruption-info field: deliver error code */ + should_have_error_code = + intr_type == INTR_TYPE_HARD_EXCEPTION && prot_mode && + x86_exception_has_error_code(vector); + if (has_error_code != should_have_error_code) + return VMXERR_ENTRY_INVALID_CONTROL_FIELD; + + /* VM-entry exception error code */ + if (has_error_code && + vmcs12->vm_entry_exception_error_code & GENMASK(31, 15)) + return VMXERR_ENTRY_INVALID_CONTROL_FIELD; + + /* VM-entry interruption-info field: reserved bits */ + if (intr_info & INTR_INFO_RESVD_BITS_MASK) + return VMXERR_ENTRY_INVALID_CONTROL_FIELD; + + /* VM-entry instruction length */ + switch (intr_type) { + case INTR_TYPE_SOFT_EXCEPTION: + case INTR_TYPE_SOFT_INTR: + case INTR_TYPE_PRIV_SW_EXCEPTION: + if ((vmcs12->vm_entry_instruction_len > 15) || + (vmcs12->vm_entry_instruction_len == 0 && + !nested_cpu_has_zero_length_injection(vcpu))) + return VMXERR_ENTRY_INVALID_CONTROL_FIELD; + } + } + return 0; } diff --git a/arch/x86/kvm/x86.h b/arch/x86/kvm/x86.h index 331993c49dae..257f27620bc2 100644 --- a/arch/x86/kvm/x86.h +++ b/arch/x86/kvm/x86.h @@ -110,6 +110,15 @@ static inline bool is_la57_mode(struct kvm_vcpu *vcpu) #endif } +static inline bool x86_exception_has_error_code(unsigned int vector) +{ + static u32 exception_has_error_code = BIT(DF_VECTOR) | BIT(TS_VECTOR) | + BIT(NP_VECTOR) | BIT(SS_VECTOR) | BIT(GP_VECTOR) | + BIT(PF_VECTOR) | BIT(AC_VECTOR); + + return (1U << vector) & exception_has_error_code; +} + static inline bool mmu_is_nested(struct kvm_vcpu *vcpu) { return vcpu->arch.walk_mmu == &vcpu->arch.nested_mmu; diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index 9a84a0d08727..2aafa6ab6103 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -641,11 +641,6 @@ static int is_f00f_bug(struct pt_regs *regs, unsigned long address) return 0; } -static const char nx_warning[] = KERN_CRIT -"kernel tried to execute NX-protected page - exploit attempt? (uid: %d)\n"; -static const char smep_warning[] = KERN_CRIT -"unable to execute userspace code (SMEP?) (uid: %d)\n"; - static void show_fault_oops(struct pt_regs *regs, unsigned long error_code, unsigned long address) @@ -664,20 +659,18 @@ show_fault_oops(struct pt_regs *regs, unsigned long error_code, pte = lookup_address_in_pgd(pgd, address, &level); if (pte && pte_present(*pte) && !pte_exec(*pte)) - printk(nx_warning, from_kuid(&init_user_ns, current_uid())); + pr_crit("kernel tried to execute NX-protected page - exploit attempt? (uid: %d)\n", + from_kuid(&init_user_ns, current_uid())); if (pte && pte_present(*pte) && pte_exec(*pte) && (pgd_flags(*pgd) & _PAGE_USER) && (__read_cr4() & X86_CR4_SMEP)) - printk(smep_warning, from_kuid(&init_user_ns, current_uid())); + pr_crit("unable to execute userspace code (SMEP?) (uid: %d)\n", + from_kuid(&init_user_ns, current_uid())); } - printk(KERN_ALERT "BUG: unable to handle kernel "); - if (address < PAGE_SIZE) - printk(KERN_CONT "NULL pointer dereference"); - else - printk(KERN_CONT "paging request"); - - printk(KERN_CONT " at %px\n", (void *) address); + pr_alert("BUG: unable to handle kernel %s at %px\n", + address < PAGE_SIZE ? "NULL pointer dereference" : "paging request", + (void *)address); dump_pagetable(address); } diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 045f492d5f68..a688617c727e 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -1350,16 +1350,28 @@ int kern_addr_valid(unsigned long addr) /* Amount of ram needed to start using large blocks */ #define MEM_SIZE_FOR_LARGE_BLOCK (64UL << 30) +/* Adjustable memory block size */ +static unsigned long set_memory_block_size; +int __init set_memory_block_size_order(unsigned int order) +{ + unsigned long size = 1UL << order; + + if (size > MEM_SIZE_FOR_LARGE_BLOCK || size < MIN_MEMORY_BLOCK_SIZE) + return -EINVAL; + + set_memory_block_size = size; + return 0; +} + static unsigned long probe_memory_block_size(void) { unsigned long boot_mem_end = max_pfn << PAGE_SHIFT; unsigned long bz; - /* If this is UV system, always set 2G block size */ - if (is_uv_system()) { - bz = MAX_BLOCK_SIZE; + /* If memory block size has been set, then use it */ + bz = set_memory_block_size; + if (bz) goto done; - } /* Use regular block if RAM is smaller than MEM_SIZE_FOR_LARGE_BLOCK */ if (boot_mem_end < MEM_SIZE_FOR_LARGE_BLOCK) { diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c index e01f7ceb9e7a..77873ce700ae 100644 --- a/arch/x86/platform/efi/efi_64.c +++ b/arch/x86/platform/efi/efi_64.c @@ -166,14 +166,14 @@ void __init efi_call_phys_epilog(pgd_t *save_pgd) pgd = pgd_offset_k(pgd_idx * PGDIR_SIZE); set_pgd(pgd_offset_k(pgd_idx * PGDIR_SIZE), save_pgd[pgd_idx]); - if (!(pgd_val(*pgd) & _PAGE_PRESENT)) + if (!pgd_present(*pgd)) continue; for (i = 0; i < PTRS_PER_P4D; i++) { p4d = p4d_offset(pgd, pgd_idx * PGDIR_SIZE + i * P4D_SIZE); - if (!(p4d_val(*p4d) & _PAGE_PRESENT)) + if (!p4d_present(*p4d)) continue; pud = (pud_t *)p4d_page_vaddr(*p4d); diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index c9081c6671f0..3b5318505c69 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -65,6 +65,13 @@ __read_mostly int xen_have_vector_callback; EXPORT_SYMBOL_GPL(xen_have_vector_callback); /* + * NB: needs to live in .data because it's used by xen_prepare_pvh which runs + * before clearing the bss. + */ +uint32_t xen_start_flags __attribute__((section(".data"))) = 0; +EXPORT_SYMBOL(xen_start_flags); + +/* * Point at some empty memory to start with. We map the real shared_info * page as soon as fixmap is up and running. */ diff --git a/arch/x86/xen/enlighten_pv.c b/arch/x86/xen/enlighten_pv.c index 357969a3697c..8d4e2e1ae60b 100644 --- a/arch/x86/xen/enlighten_pv.c +++ b/arch/x86/xen/enlighten_pv.c @@ -1203,6 +1203,7 @@ asmlinkage __visible void __init xen_start_kernel(void) return; xen_domain_type = XEN_PV_DOMAIN; + xen_start_flags = xen_start_info->flags; xen_setup_features(); diff --git a/arch/x86/xen/enlighten_pvh.c b/arch/x86/xen/enlighten_pvh.c index aa1c6a6831a9..c85d1a88f476 100644 --- a/arch/x86/xen/enlighten_pvh.c +++ b/arch/x86/xen/enlighten_pvh.c @@ -97,6 +97,7 @@ void __init xen_prepare_pvh(void) } xen_pvh = 1; + xen_start_flags = pvh_start_info.flags; msr = cpuid_ebx(xen_cpuid_base() + 2); pfn = __pa(hypercall_page); diff --git a/arch/x86/xen/smp_pv.c b/arch/x86/xen/smp_pv.c index 2e20ae2fa2d6..e3b18ad49889 100644 --- a/arch/x86/xen/smp_pv.c +++ b/arch/x86/xen/smp_pv.c @@ -32,6 +32,7 @@ #include <xen/interface/vcpu.h> #include <xen/interface/xenpmu.h> +#include <asm/spec-ctrl.h> #include <asm/xen/interface.h> #include <asm/xen/hypercall.h> @@ -70,6 +71,8 @@ static void cpu_bringup(void) cpu_data(cpu).x86_max_cores = 1; set_cpu_sibling_map(cpu); + speculative_store_bypass_ht_init(); + xen_setup_cpu_clockevents(); notify_cpu_starting(cpu); @@ -250,6 +253,8 @@ static void __init xen_pv_smp_prepare_cpus(unsigned int max_cpus) } set_cpu_sibling_map(0); + speculative_store_bypass_ht_init(); + xen_pmu_init(0); if (xen_smp_intr_init(0) || xen_smp_intr_init_pv(0)) diff --git a/block/bio.c b/block/bio.c index 9710e275f230..67eff5eddc49 100644 --- a/block/bio.c +++ b/block/bio.c @@ -1807,9 +1807,6 @@ again: if (!bio_integrity_endio(bio)) return; - if (WARN_ONCE(bio->bi_next, "driver left bi_next not NULL")) - bio->bi_next = NULL; - /* * Need to have a real endio function for chained bios, otherwise * various corner cases will break (like stacking block devices that diff --git a/block/blk-core.c b/block/blk-core.c index cf0ee764b908..f84a9b7b6f5a 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -273,10 +273,6 @@ static void req_bio_endio(struct request *rq, struct bio *bio, bio_advance(bio, nbytes); /* don't actually finish bio if it's part of flush sequence */ - /* - * XXX this code looks suspicious - it's not consistent with advancing - * req->bio in caller - */ if (bio->bi_iter.bi_size == 0 && !(rq->rq_flags & RQF_FLUSH_SEQ)) bio_endio(bio); } @@ -3081,10 +3077,8 @@ bool blk_update_request(struct request *req, blk_status_t error, struct bio *bio = req->bio; unsigned bio_bytes = min(bio->bi_iter.bi_size, nr_bytes); - if (bio_bytes == bio->bi_iter.bi_size) { + if (bio_bytes == bio->bi_iter.bi_size) req->bio = bio->bi_next; - bio->bi_next = NULL; - } /* Completion has already been traced */ bio_clear_flag(bio, BIO_TRACE_COMPLETION); @@ -3479,6 +3473,10 @@ static void __blk_rq_prep_clone(struct request *dst, struct request *src) dst->cpu = src->cpu; dst->__sector = blk_rq_pos(src); dst->__data_len = blk_rq_bytes(src); + if (src->rq_flags & RQF_SPECIAL_PAYLOAD) { + dst->rq_flags |= RQF_SPECIAL_PAYLOAD; + dst->special_vec = src->special_vec; + } dst->nr_phys_segments = src->nr_phys_segments; dst->ioprio = src->ioprio; dst->extra_len = src->extra_len; diff --git a/block/blk-mq-debugfs.c b/block/blk-mq-debugfs.c index ffa622366922..1c4532e92938 100644 --- a/block/blk-mq-debugfs.c +++ b/block/blk-mq-debugfs.c @@ -356,7 +356,7 @@ static const char *const blk_mq_rq_state_name_array[] = { static const char *blk_mq_rq_state_name(enum mq_rq_state rq_state) { - if (WARN_ON_ONCE((unsigned int)rq_state > + if (WARN_ON_ONCE((unsigned int)rq_state >= ARRAY_SIZE(blk_mq_rq_state_name_array))) return "(?)"; return blk_mq_rq_state_name_array[rq_state]; diff --git a/block/blk-mq.c b/block/blk-mq.c index 70c65bb6c013..95919268564b 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -781,7 +781,6 @@ static void blk_mq_rq_timed_out(struct request *req, bool reserved) WARN_ON_ONCE(ret != BLK_EH_RESET_TIMER); } - req->rq_flags &= ~RQF_TIMED_OUT; blk_add_timer(req); } @@ -1076,6 +1075,9 @@ static bool blk_mq_mark_tag_wait(struct blk_mq_hw_ctx **hctx, #define BLK_MQ_RESOURCE_DELAY 3 /* ms units */ +/* + * Returns true if we did some work AND can potentially do more. + */ bool blk_mq_dispatch_rq_list(struct request_queue *q, struct list_head *list, bool got_budget) { @@ -1206,8 +1208,17 @@ bool blk_mq_dispatch_rq_list(struct request_queue *q, struct list_head *list, blk_mq_run_hw_queue(hctx, true); else if (needs_restart && (ret == BLK_STS_RESOURCE)) blk_mq_delay_run_hw_queue(hctx, BLK_MQ_RESOURCE_DELAY); + + return false; } + /* + * If the host/device is unable to accept more work, inform the + * caller of that. + */ + if (ret == BLK_STS_RESOURCE || ret == BLK_STS_DEV_RESOURCE) + return false; + return (queued + errors) != 0; } diff --git a/block/blk-softirq.c b/block/blk-softirq.c index 01e2b353a2b9..15c1f5e12eb8 100644 --- a/block/blk-softirq.c +++ b/block/blk-softirq.c @@ -144,6 +144,7 @@ do_local: local_irq_restore(flags); } +EXPORT_SYMBOL(__blk_complete_request); /** * blk_complete_request - end I/O on a request diff --git a/block/blk-timeout.c b/block/blk-timeout.c index 4b8a48d48ba1..f2cfd56e1606 100644 --- a/block/blk-timeout.c +++ b/block/blk-timeout.c @@ -210,6 +210,7 @@ void blk_add_timer(struct request *req) if (!req->timeout) req->timeout = q->rq_timeout; + req->rq_flags &= ~RQF_TIMED_OUT; blk_rq_set_deadline(req, jiffies + req->timeout); /* diff --git a/block/sed-opal.c b/block/sed-opal.c index 945f4b8610e0..e0de4dd448b3 100644 --- a/block/sed-opal.c +++ b/block/sed-opal.c @@ -877,7 +877,7 @@ static size_t response_get_string(const struct parsed_resp *resp, int n, return 0; } - if (n > resp->num) { + if (n >= resp->num) { pr_debug("Response has %d tokens. Can't access %d\n", resp->num, n); return 0; @@ -916,7 +916,7 @@ static u64 response_get_u64(const struct parsed_resp *resp, int n) return 0; } - if (n > resp->num) { + if (n >= resp->num) { pr_debug("Response has %d tokens. Can't access %d\n", resp->num, n); return 0; diff --git a/certs/blacklist.h b/certs/blacklist.h index 150d82da8e99..1efd6fa0dc60 100644 --- a/certs/blacklist.h +++ b/certs/blacklist.h @@ -1,3 +1,3 @@ #include <linux/kernel.h> -extern const char __initdata *const blacklist_hashes[]; +extern const char __initconst *const blacklist_hashes[]; diff --git a/crypto/af_alg.c b/crypto/af_alg.c index 49fa8582138b..314c52c967e5 100644 --- a/crypto/af_alg.c +++ b/crypto/af_alg.c @@ -1060,12 +1060,19 @@ void af_alg_async_cb(struct crypto_async_request *_req, int err) } EXPORT_SYMBOL_GPL(af_alg_async_cb); -__poll_t af_alg_poll_mask(struct socket *sock, __poll_t events) +/** + * af_alg_poll - poll system call handler + */ +__poll_t af_alg_poll(struct file *file, struct socket *sock, + poll_table *wait) { struct sock *sk = sock->sk; struct alg_sock *ask = alg_sk(sk); struct af_alg_ctx *ctx = ask->private; - __poll_t mask = 0; + __poll_t mask; + + sock_poll_wait(file, sk_sleep(sk), wait); + mask = 0; if (!ctx->more || ctx->used) mask |= EPOLLIN | EPOLLRDNORM; @@ -1075,7 +1082,7 @@ __poll_t af_alg_poll_mask(struct socket *sock, __poll_t events) return mask; } -EXPORT_SYMBOL_GPL(af_alg_poll_mask); +EXPORT_SYMBOL_GPL(af_alg_poll); /** * af_alg_alloc_areq - allocate struct af_alg_async_req diff --git a/crypto/algif_aead.c b/crypto/algif_aead.c index 825524f27438..c40a8c7ee8ae 100644 --- a/crypto/algif_aead.c +++ b/crypto/algif_aead.c @@ -375,7 +375,7 @@ static struct proto_ops algif_aead_ops = { .sendmsg = aead_sendmsg, .sendpage = af_alg_sendpage, .recvmsg = aead_recvmsg, - .poll_mask = af_alg_poll_mask, + .poll = af_alg_poll, }; static int aead_check_key(struct socket *sock) @@ -471,7 +471,7 @@ static struct proto_ops algif_aead_ops_nokey = { .sendmsg = aead_sendmsg_nokey, .sendpage = aead_sendpage_nokey, .recvmsg = aead_recvmsg_nokey, - .poll_mask = af_alg_poll_mask, + .poll = af_alg_poll, }; static void *aead_bind(const char *name, u32 type, u32 mask) diff --git a/crypto/algif_skcipher.c b/crypto/algif_skcipher.c index 4c04eb9888ad..cfdaab2b7d76 100644 --- a/crypto/algif_skcipher.c +++ b/crypto/algif_skcipher.c @@ -206,7 +206,7 @@ static struct proto_ops algif_skcipher_ops = { .sendmsg = skcipher_sendmsg, .sendpage = af_alg_sendpage, .recvmsg = skcipher_recvmsg, - .poll_mask = af_alg_poll_mask, + .poll = af_alg_poll, }; static int skcipher_check_key(struct socket *sock) @@ -302,7 +302,7 @@ static struct proto_ops algif_skcipher_ops_nokey = { .sendmsg = skcipher_sendmsg_nokey, .sendpage = skcipher_sendpage_nokey, .recvmsg = skcipher_recvmsg_nokey, - .poll_mask = af_alg_poll_mask, + .poll = af_alg_poll, }; static void *skcipher_bind(const char *name, u32 type, u32 mask) diff --git a/crypto/asymmetric_keys/x509_cert_parser.c b/crypto/asymmetric_keys/x509_cert_parser.c index 7d81e6bb461a..b6cabac4b62b 100644 --- a/crypto/asymmetric_keys/x509_cert_parser.c +++ b/crypto/asymmetric_keys/x509_cert_parser.c @@ -249,6 +249,15 @@ int x509_note_signature(void *context, size_t hdrlen, return -EINVAL; } + if (strcmp(ctx->cert->sig->pkey_algo, "rsa") == 0) { + /* Discard the BIT STRING metadata */ + if (vlen < 1 || *(const u8 *)value != 0) + return -EBADMSG; + + value++; + vlen--; + } + ctx->cert->raw_sig = value; ctx->cert->raw_sig_size = vlen; return 0; diff --git a/crypto/morus640.c b/crypto/morus640.c index 9fbcde307daf..5eede3749e64 100644 --- a/crypto/morus640.c +++ b/crypto/morus640.c @@ -274,8 +274,9 @@ static void crypto_morus640_decrypt_chunk(struct morus640_state *state, u8 *dst, union morus640_block_in tail; memcpy(tail.bytes, src, size); + memset(tail.bytes + size, 0, MORUS640_BLOCK_SIZE - size); - crypto_morus640_load_a(&m, src); + crypto_morus640_load_a(&m, tail.bytes); crypto_morus640_core(state, &m); crypto_morus640_store_a(tail.bytes, &m); memset(tail.bytes + size, 0, MORUS640_BLOCK_SIZE - size); diff --git a/crypto/sha3_generic.c b/crypto/sha3_generic.c index 264ec12c0b9c..7f6735d9003f 100644 --- a/crypto/sha3_generic.c +++ b/crypto/sha3_generic.c @@ -152,7 +152,7 @@ static SHA3_INLINE void keccakf_round(u64 st[25]) st[24] ^= bc[ 4]; } -static void __optimize("O3") keccakf(u64 st[25]) +static void keccakf(u64 st[25]) { int round; diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c index 38a286975c31..f8fecfec5df9 100644 --- a/drivers/acpi/acpi_lpss.c +++ b/drivers/acpi/acpi_lpss.c @@ -22,6 +22,7 @@ #include <linux/pm_domain.h> #include <linux/pm_runtime.h> #include <linux/pwm.h> +#include <linux/suspend.h> #include <linux/delay.h> #include "internal.h" @@ -946,9 +947,10 @@ static void lpss_iosf_exit_d3_state(void) mutex_unlock(&lpss_iosf_mutex); } -static int acpi_lpss_suspend(struct device *dev, bool wakeup) +static int acpi_lpss_suspend(struct device *dev, bool runtime) { struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev)); + bool wakeup = runtime || device_may_wakeup(dev); int ret; if (pdata->dev_desc->flags & LPSS_SAVE_CTX) @@ -961,13 +963,14 @@ static int acpi_lpss_suspend(struct device *dev, bool wakeup) * wrong status for devices being about to be powered off. See * lpss_iosf_enter_d3_state() for further information. */ - if (lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available()) + if ((runtime || !pm_suspend_via_firmware()) && + lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available()) lpss_iosf_enter_d3_state(); return ret; } -static int acpi_lpss_resume(struct device *dev) +static int acpi_lpss_resume(struct device *dev, bool runtime) { struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev)); int ret; @@ -976,7 +979,8 @@ static int acpi_lpss_resume(struct device *dev) * This call is kept first to be in symmetry with * acpi_lpss_runtime_suspend() one. */ - if (lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available()) + if ((runtime || !pm_resume_via_firmware()) && + lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available()) lpss_iosf_exit_d3_state(); ret = acpi_dev_resume(dev); @@ -1000,12 +1004,12 @@ static int acpi_lpss_suspend_late(struct device *dev) return 0; ret = pm_generic_suspend_late(dev); - return ret ? ret : acpi_lpss_suspend(dev, device_may_wakeup(dev)); + return ret ? ret : acpi_lpss_suspend(dev, false); } static int acpi_lpss_resume_early(struct device *dev) { - int ret = acpi_lpss_resume(dev); + int ret = acpi_lpss_resume(dev, false); return ret ? ret : pm_generic_resume_early(dev); } @@ -1020,7 +1024,7 @@ static int acpi_lpss_runtime_suspend(struct device *dev) static int acpi_lpss_runtime_resume(struct device *dev) { - int ret = acpi_lpss_resume(dev); + int ret = acpi_lpss_resume(dev, true); return ret ? ret : pm_generic_runtime_resume(dev); } diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index bb94cf0731fe..442a9e24f439 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -2037,6 +2037,17 @@ static inline void acpi_ec_query_exit(void) } } +static const struct dmi_system_id acpi_ec_no_wakeup[] = { + { + .ident = "Thinkpad X1 Carbon 6th", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "20KGS3JF01"), + }, + }, + { }, +}; + int __init acpi_ec_init(void) { int result; @@ -2047,6 +2058,15 @@ int __init acpi_ec_init(void) if (result) return result; + /* + * Disable EC wakeup on following systems to prevent periodic + * wakeup from EC GPE. + */ + if (dmi_check_system(acpi_ec_no_wakeup)) { + ec_no_wakeup = true; + pr_debug("Disabling EC wakeup on suspend-to-idle\n"); + } + /* Drivers must be started after acpi_ec_query_init() */ dsdt_fail = acpi_bus_register_driver(&acpi_ec_driver); /* diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 7ca41bf023c9..8df9abfa947b 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -45,6 +45,8 @@ #include <linux/uaccess.h> #include <linux/io-64-nonatomic-lo-hi.h> +#include "acpica/accommon.h" +#include "acpica/acnamesp.h" #include "internal.h" #define _COMPONENT ACPI_OS_SERVICES @@ -1490,6 +1492,76 @@ int acpi_check_region(resource_size_t start, resource_size_t n, } EXPORT_SYMBOL(acpi_check_region); +static acpi_status acpi_deactivate_mem_region(acpi_handle handle, u32 level, + void *_res, void **return_value) +{ + struct acpi_mem_space_context **mem_ctx; + union acpi_operand_object *handler_obj; + union acpi_operand_object *region_obj2; + union acpi_operand_object *region_obj; + struct resource *res = _res; + acpi_status status; + + region_obj = acpi_ns_get_attached_object(handle); + if (!region_obj) + return AE_OK; + + handler_obj = region_obj->region.handler; + if (!handler_obj) + return AE_OK; + + if (region_obj->region.space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) + return AE_OK; + + if (!(region_obj->region.flags & AOPOBJ_SETUP_COMPLETE)) + return AE_OK; + + region_obj2 = acpi_ns_get_secondary_object(region_obj); + if (!region_obj2) + return AE_OK; + + mem_ctx = (void *)®ion_obj2->extra.region_context; + + if (!(mem_ctx[0]->address >= res->start && + mem_ctx[0]->address < res->end)) + return AE_OK; + + status = handler_obj->address_space.setup(region_obj, + ACPI_REGION_DEACTIVATE, + NULL, (void **)mem_ctx); + if (ACPI_SUCCESS(status)) + region_obj->region.flags &= ~(AOPOBJ_SETUP_COMPLETE); + + return status; +} + +/** + * acpi_release_memory - Release any mappings done to a memory region + * @handle: Handle to namespace node + * @res: Memory resource + * @level: A level that terminates the search + * + * Walks through @handle and unmaps all SystemMemory Operation Regions that + * overlap with @res and that have already been activated (mapped). + * + * This is a helper that allows drivers to place special requirements on memory + * region that may overlap with operation regions, primarily allowing them to + * safely map the region as non-cached memory. + * + * The unmapped Operation Regions will be automatically remapped next time they + * are called, so the drivers do not need to do anything else. + */ +acpi_status acpi_release_memory(acpi_handle handle, struct resource *res, + u32 level) +{ + if (!(res->flags & IORESOURCE_MEM)) + return AE_TYPE; + + return acpi_walk_namespace(ACPI_TYPE_REGION, handle, level, + acpi_deactivate_mem_region, NULL, res, NULL); +} +EXPORT_SYMBOL_GPL(acpi_release_memory); + /* * Let drivers know whether the resource checks are effective */ diff --git a/drivers/base/Makefile b/drivers/base/Makefile index b074f242a435..704f44295810 100644 --- a/drivers/base/Makefile +++ b/drivers/base/Makefile @@ -8,10 +8,7 @@ obj-y := component.o core.o bus.o dd.o syscore.o \ topology.o container.o property.o cacheinfo.o \ devcon.o obj-$(CONFIG_DEVTMPFS) += devtmpfs.o -obj-$(CONFIG_DMA_CMA) += dma-contiguous.o obj-y += power/ -obj-$(CONFIG_HAS_DMA) += dma-mapping.o -obj-$(CONFIG_HAVE_GENERIC_DMA_COHERENT) += dma-coherent.o obj-$(CONFIG_ISA_BUS_API) += isa.o obj-y += firmware_loader/ obj-$(CONFIG_NUMA) += node.o diff --git a/drivers/base/core.c b/drivers/base/core.c index 36622b52e419..df3e1a44707a 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -236,6 +236,13 @@ struct device_link *device_link_add(struct device *consumer, link->rpm_active = true; } pm_runtime_new_link(consumer); + /* + * If the link is being added by the consumer driver at probe + * time, balance the decrementation of the supplier's runtime PM + * usage counter after consumer probe in driver_probe_device(). + */ + if (consumer->links.status == DL_DEV_PROBING) + pm_runtime_get_noresume(supplier); } get_device(supplier); link->supplier = supplier; @@ -255,12 +262,12 @@ struct device_link *device_link_add(struct device *consumer, switch (consumer->links.status) { case DL_DEV_PROBING: /* - * Balance the decrementation of the supplier's - * runtime PM usage counter after consumer probe - * in driver_probe_device(). + * Some callers expect the link creation during + * consumer driver probe to resume the supplier + * even without DL_FLAG_RPM_ACTIVE. */ if (flags & DL_FLAG_PM_RUNTIME) - pm_runtime_get_sync(supplier); + pm_runtime_resume(supplier); link->status = DL_STATE_CONSUMER_PROBE; break; diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c index 4925af5c4cf0..c298de8a8308 100644 --- a/drivers/base/power/domain.c +++ b/drivers/base/power/domain.c @@ -2487,10 +2487,9 @@ EXPORT_SYMBOL_GPL(of_genpd_parse_idle_states); * power domain corresponding to a DT node's "required-opps" property. * * @dev: Device for which the performance-state needs to be found. - * @opp_node: DT node where the "required-opps" property is present. This can be + * @np: DT node where the "required-opps" property is present. This can be * the device node itself (if it doesn't have an OPP table) or a node * within the OPP table of a device (if device has an OPP table). - * @state: Pointer to return performance state. * * Returns performance state corresponding to the "required-opps" property of * a DT node. This calls platform specific genpd->opp_to_performance_state() @@ -2499,7 +2498,7 @@ EXPORT_SYMBOL_GPL(of_genpd_parse_idle_states); * Returns performance state on success and 0 on failure. */ unsigned int of_genpd_opp_to_performance_state(struct device *dev, - struct device_node *opp_node) + struct device_node *np) { struct generic_pm_domain *genpd; struct dev_pm_opp *opp; @@ -2514,7 +2513,7 @@ unsigned int of_genpd_opp_to_performance_state(struct device *dev, genpd_lock(genpd); - opp = of_dev_pm_opp_find_required_opp(&genpd->dev, opp_node); + opp = of_dev_pm_opp_find_required_opp(&genpd->dev, np); if (IS_ERR(opp)) { dev_err(dev, "Failed to find required OPP: %ld\n", PTR_ERR(opp)); diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c index a47e4987ee46..d146fedc38bb 100644 --- a/drivers/block/drbd/drbd_req.c +++ b/drivers/block/drbd/drbd_req.c @@ -1244,8 +1244,8 @@ drbd_request_prepare(struct drbd_device *device, struct bio *bio, unsigned long _drbd_start_io_acct(device, req); /* process discards always from our submitter thread */ - if ((bio_op(bio) & REQ_OP_WRITE_ZEROES) || - (bio_op(bio) & REQ_OP_DISCARD)) + if (bio_op(bio) == REQ_OP_WRITE_ZEROES || + bio_op(bio) == REQ_OP_DISCARD) goto queue_for_submitter_thread; if (rw == WRITE && req->private_bio && req->i.size diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 3b7083b8ecbb..74a05561b620 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -76,6 +76,7 @@ struct link_dead_args { #define NBD_HAS_CONFIG_REF 4 #define NBD_BOUND 5 #define NBD_DESTROY_ON_DISCONNECT 6 +#define NBD_DISCONNECT_ON_CLOSE 7 struct nbd_config { u32 flags; @@ -138,6 +139,7 @@ static void nbd_config_put(struct nbd_device *nbd); static void nbd_connect_reply(struct genl_info *info, int index); static int nbd_genl_status(struct sk_buff *skb, struct genl_info *info); static void nbd_dead_link_work(struct work_struct *work); +static void nbd_disconnect_and_put(struct nbd_device *nbd); static inline struct device *nbd_to_dev(struct nbd_device *nbd) { @@ -1305,6 +1307,12 @@ out: static void nbd_release(struct gendisk *disk, fmode_t mode) { struct nbd_device *nbd = disk->private_data; + struct block_device *bdev = bdget_disk(disk, 0); + + if (test_bit(NBD_DISCONNECT_ON_CLOSE, &nbd->config->runtime_flags) && + bdev->bd_openers == 0) + nbd_disconnect_and_put(nbd); + nbd_config_put(nbd); nbd_put(nbd); } @@ -1705,6 +1713,10 @@ again: &config->runtime_flags); put_dev = true; } + if (flags & NBD_CFLAG_DISCONNECT_ON_CLOSE) { + set_bit(NBD_DISCONNECT_ON_CLOSE, + &config->runtime_flags); + } } if (info->attrs[NBD_ATTR_SOCKETS]) { @@ -1749,6 +1761,17 @@ out: return ret; } +static void nbd_disconnect_and_put(struct nbd_device *nbd) +{ + mutex_lock(&nbd->config_lock); + nbd_disconnect(nbd); + nbd_clear_sock(nbd); + mutex_unlock(&nbd->config_lock); + if (test_and_clear_bit(NBD_HAS_CONFIG_REF, + &nbd->config->runtime_flags)) + nbd_config_put(nbd); +} + static int nbd_genl_disconnect(struct sk_buff *skb, struct genl_info *info) { struct nbd_device *nbd; @@ -1781,13 +1804,7 @@ static int nbd_genl_disconnect(struct sk_buff *skb, struct genl_info *info) nbd_put(nbd); return 0; } - mutex_lock(&nbd->config_lock); - nbd_disconnect(nbd); - nbd_clear_sock(nbd); - mutex_unlock(&nbd->config_lock); - if (test_and_clear_bit(NBD_HAS_CONFIG_REF, - &nbd->config->runtime_flags)) - nbd_config_put(nbd); + nbd_disconnect_and_put(nbd); nbd_config_put(nbd); nbd_put(nbd); return 0; @@ -1798,7 +1815,7 @@ static int nbd_genl_reconfigure(struct sk_buff *skb, struct genl_info *info) struct nbd_device *nbd = NULL; struct nbd_config *config; int index; - int ret = -EINVAL; + int ret = 0; bool put_dev = false; if (!netlink_capable(skb, CAP_SYS_ADMIN)) @@ -1838,6 +1855,7 @@ static int nbd_genl_reconfigure(struct sk_buff *skb, struct genl_info *info) !nbd->task_recv) { dev_err(nbd_to_dev(nbd), "not configured, cannot reconfigure\n"); + ret = -EINVAL; goto out; } @@ -1862,6 +1880,14 @@ static int nbd_genl_reconfigure(struct sk_buff *skb, struct genl_info *info) &config->runtime_flags)) refcount_inc(&nbd->refs); } + + if (flags & NBD_CFLAG_DISCONNECT_ON_CLOSE) { + set_bit(NBD_DISCONNECT_ON_CLOSE, + &config->runtime_flags); + } else { + clear_bit(NBD_DISCONNECT_ON_CLOSE, + &config->runtime_flags); + } } if (info->attrs[NBD_ATTR_SOCKETS]) { diff --git a/drivers/block/null_blk.c b/drivers/block/null_blk.c index 7948049f6c43..042c778e5a4e 100644 --- a/drivers/block/null_blk.c +++ b/drivers/block/null_blk.c @@ -1365,7 +1365,7 @@ static blk_qc_t null_queue_bio(struct request_queue *q, struct bio *bio) static enum blk_eh_timer_return null_rq_timed_out_fn(struct request *rq) { pr_info("null: rq %p timed out\n", rq); - blk_mq_complete_request(rq); + __blk_complete_request(rq); return BLK_EH_DONE; } diff --git a/drivers/bluetooth/hci_nokia.c b/drivers/bluetooth/hci_nokia.c index 14d159e2042d..2dc33e65d2d0 100644 --- a/drivers/bluetooth/hci_nokia.c +++ b/drivers/bluetooth/hci_nokia.c @@ -29,7 +29,7 @@ #include <linux/slab.h> #include <linux/string.h> #include <linux/types.h> -#include <linux/unaligned/le_struct.h> +#include <asm/unaligned.h> #include <net/bluetooth/bluetooth.h> #include <net/bluetooth/hci_core.h> diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index 1cc29629d238..c9bac9dc4637 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -23,11 +23,14 @@ #include <linux/of_address.h> #include <linux/of_platform.h> #include <linux/slab.h> +#include <linux/iopoll.h> #include <linux/platform_data/ti-sysc.h> #include <dt-bindings/bus/ti-sysc.h> +#define MAX_MODULE_SOFTRESET_WAIT 10000 + static const char * const reg_names[] = { "rev", "sysc", "syss", }; enum sysc_clocks { @@ -88,6 +91,11 @@ struct sysc { struct delayed_work idle_work; }; +void sysc_write(struct sysc *ddata, int offset, u32 value) +{ + writel_relaxed(value, ddata->module_va + offset); +} + static u32 sysc_read(struct sysc *ddata, int offset) { if (ddata->cfg.quirks & SYSC_QUIRK_16BIT) { @@ -169,9 +177,9 @@ static int sysc_get_clocks(struct sysc *ddata) const char *name; int nr_fck = 0, nr_ick = 0, i, error = 0; - ddata->clock_roles = devm_kzalloc(ddata->dev, - sizeof(*ddata->clock_roles) * + ddata->clock_roles = devm_kcalloc(ddata->dev, SYSC_MAX_CLOCKS, + sizeof(*ddata->clock_roles), GFP_KERNEL); if (!ddata->clock_roles) return -ENOMEM; @@ -200,8 +208,8 @@ static int sysc_get_clocks(struct sysc *ddata) return -EINVAL; } - ddata->clocks = devm_kzalloc(ddata->dev, - sizeof(*ddata->clocks) * ddata->nr_clocks, + ddata->clocks = devm_kcalloc(ddata->dev, + ddata->nr_clocks, sizeof(*ddata->clocks), GFP_KERNEL); if (!ddata->clocks) return -ENOMEM; @@ -943,6 +951,36 @@ static void sysc_init_revision_quirks(struct sysc *ddata) } } +static int sysc_reset(struct sysc *ddata) +{ + int offset = ddata->offsets[SYSC_SYSCONFIG]; + int val; + + if (ddata->legacy_mode || offset < 0 || + ddata->cfg.quirks & SYSC_QUIRK_NO_RESET_ON_INIT) + return 0; + + /* + * Currently only support reset status in sysstatus. + * Warn and return error in all other cases + */ + if (!ddata->cfg.syss_mask) { + dev_err(ddata->dev, "No ti,syss-mask. Reset failed\n"); + return -EINVAL; + } + + val = sysc_read(ddata, offset); + val |= (0x1 << ddata->cap->regbits->srst_shift); + sysc_write(ddata, offset, val); + + /* Poll on reset status */ + offset = ddata->offsets[SYSC_SYSSTATUS]; + + return readl_poll_timeout(ddata->module_va + offset, val, + (val & ddata->cfg.syss_mask) == 0x0, + 100, MAX_MODULE_SOFTRESET_WAIT); +} + /* At this point the module is configured enough to read the revision */ static int sysc_init_module(struct sysc *ddata) { @@ -960,6 +998,14 @@ static int sysc_init_module(struct sysc *ddata) return 0; } + error = sysc_reset(ddata); + if (error) { + dev_err(ddata->dev, "Reset failed with %d\n", error); + pm_runtime_put_sync(ddata->dev); + + return error; + } + ddata->revision = sysc_read_revision(ddata); pm_runtime_put_sync(ddata->dev); @@ -1552,6 +1598,23 @@ static const struct sysc_capabilities sysc_omap4_usb_host_fs = { .regbits = &sysc_regbits_omap4_usb_host_fs, }; +static const struct sysc_regbits sysc_regbits_dra7_mcan = { + .dmadisable_shift = -ENODEV, + .midle_shift = -ENODEV, + .sidle_shift = -ENODEV, + .clkact_shift = -ENODEV, + .enwkup_shift = 4, + .srst_shift = 0, + .emufree_shift = -ENODEV, + .autoidle_shift = -ENODEV, +}; + +static const struct sysc_capabilities sysc_dra7_mcan = { + .type = TI_SYSC_DRA7_MCAN, + .sysc_mask = SYSC_DRA7_MCAN_ENAWAKEUP | SYSC_OMAP4_SOFTRESET, + .regbits = &sysc_regbits_dra7_mcan, +}; + static int sysc_init_pdata(struct sysc *ddata) { struct ti_sysc_platform_data *pdata = dev_get_platdata(ddata->dev); @@ -1743,6 +1806,7 @@ static const struct of_device_id sysc_match[] = { { .compatible = "ti,sysc-mcasp", .data = &sysc_omap4_mcasp, }, { .compatible = "ti,sysc-usb-host-fs", .data = &sysc_omap4_usb_host_fs, }, + { .compatible = "ti,sysc-dra7-mcan", .data = &sysc_dra7_mcan, }, { }, }; MODULE_DEVICE_TABLE(of, sysc_match); diff --git a/drivers/char/hw_random/core.c b/drivers/char/hw_random/core.c index 91bb98c42a1c..aaf9e5afaad4 100644 --- a/drivers/char/hw_random/core.c +++ b/drivers/char/hw_random/core.c @@ -516,11 +516,18 @@ EXPORT_SYMBOL_GPL(hwrng_register); void hwrng_unregister(struct hwrng *rng) { + int err; + mutex_lock(&rng_mutex); list_del(&rng->list); - if (current_rng == rng) - enable_best_rng(); + if (current_rng == rng) { + err = enable_best_rng(); + if (err) { + drop_current_rng(); + cur_rng_set_by_user = 0; + } + } if (list_empty(&rng_list)) { mutex_unlock(&rng_mutex); diff --git a/drivers/char/random.c b/drivers/char/random.c index a8fb0020ba5c..cd888d4ee605 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -402,7 +402,8 @@ static struct poolinfo { /* * Static global variables */ -static DECLARE_WAIT_QUEUE_HEAD(random_wait); +static DECLARE_WAIT_QUEUE_HEAD(random_read_wait); +static DECLARE_WAIT_QUEUE_HEAD(random_write_wait); static struct fasync_struct *fasync; static DEFINE_SPINLOCK(random_ready_list_lock); @@ -721,8 +722,8 @@ retry: /* should we wake readers? */ if (entropy_bits >= random_read_wakeup_bits && - wq_has_sleeper(&random_wait)) { - wake_up_interruptible_poll(&random_wait, POLLIN); + wq_has_sleeper(&random_read_wait)) { + wake_up_interruptible(&random_read_wait); kill_fasync(&fasync, SIGIO, POLL_IN); } /* If the input pool is getting full, send some @@ -1396,7 +1397,7 @@ retry: trace_debit_entropy(r->name, 8 * ibytes); if (ibytes && (r->entropy_count >> ENTROPY_SHIFT) < random_write_wakeup_bits) { - wake_up_interruptible_poll(&random_wait, POLLOUT); + wake_up_interruptible(&random_write_wait); kill_fasync(&fasync, SIGIO, POLL_OUT); } @@ -1838,7 +1839,7 @@ _random_read(int nonblock, char __user *buf, size_t nbytes) if (nonblock) return -EAGAIN; - wait_event_interruptible(random_wait, + wait_event_interruptible(random_read_wait, ENTROPY_BITS(&input_pool) >= random_read_wakeup_bits); if (signal_pending(current)) @@ -1875,17 +1876,14 @@ urandom_read(struct file *file, char __user *buf, size_t nbytes, loff_t *ppos) return ret; } -static struct wait_queue_head * -random_get_poll_head(struct file *file, __poll_t events) -{ - return &random_wait; -} - static __poll_t -random_poll_mask(struct file *file, __poll_t events) +random_poll(struct file *file, poll_table * wait) { - __poll_t mask = 0; + __poll_t mask; + poll_wait(file, &random_read_wait, wait); + poll_wait(file, &random_write_wait, wait); + mask = 0; if (ENTROPY_BITS(&input_pool) >= random_read_wakeup_bits) mask |= EPOLLIN | EPOLLRDNORM; if (ENTROPY_BITS(&input_pool) < random_write_wakeup_bits) @@ -1992,8 +1990,7 @@ static int random_fasync(int fd, struct file *filp, int on) const struct file_operations random_fops = { .read = random_read, .write = random_write, - .get_poll_head = random_get_poll_head, - .poll_mask = random_poll_mask, + .poll = random_poll, .unlocked_ioctl = random_ioctl, .fasync = random_fasync, .llseek = noop_llseek, @@ -2326,7 +2323,7 @@ void add_hwgenerator_randomness(const char *buffer, size_t count, * We'll be woken up again once below random_write_wakeup_thresh, * or when the calling thread is about to terminate. */ - wait_event_interruptible(random_wait, kthread_should_stop() || + wait_event_interruptible(random_write_wait, kthread_should_stop() || ENTROPY_BITS(&input_pool) <= random_write_wakeup_bits); mix_pool_bytes(poolp, buffer, count); credit_entropy_bits(poolp, entropy); diff --git a/drivers/clk/imx/clk-imx6ul.c b/drivers/clk/imx/clk-imx6ul.c index ba563ba50b40..d3f7f4db80af 100644 --- a/drivers/clk/imx/clk-imx6ul.c +++ b/drivers/clk/imx/clk-imx6ul.c @@ -79,12 +79,6 @@ static const char *cko_sels[] = { "cko1", "cko2", }; static struct clk *clks[IMX6UL_CLK_END]; static struct clk_onecell_data clk_data; -static int const clks_init_on[] __initconst = { - IMX6UL_CLK_AIPSTZ1, IMX6UL_CLK_AIPSTZ2, - IMX6UL_CLK_AXI, IMX6UL_CLK_ARM, IMX6UL_CLK_ROM, - IMX6UL_CLK_MMDC_P0_FAST, IMX6UL_CLK_MMDC_P0_IPG, -}; - static const struct clk_div_table clk_enet_ref_table[] = { { .val = 0, .div = 20, }, { .val = 1, .div = 10, }, @@ -129,7 +123,6 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node) { struct device_node *np; void __iomem *base; - int i; clks[IMX6UL_CLK_DUMMY] = imx_clk_fixed("dummy", 0); @@ -336,8 +329,8 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node) clks[IMX6UL_CLK_AHB] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1); /* CCGR0 */ - clks[IMX6UL_CLK_AIPSTZ1] = imx_clk_gate2("aips_tz1", "ahb", base + 0x68, 0); - clks[IMX6UL_CLK_AIPSTZ2] = imx_clk_gate2("aips_tz2", "ahb", base + 0x68, 2); + clks[IMX6UL_CLK_AIPSTZ1] = imx_clk_gate2_flags("aips_tz1", "ahb", base + 0x68, 0, CLK_IS_CRITICAL); + clks[IMX6UL_CLK_AIPSTZ2] = imx_clk_gate2_flags("aips_tz2", "ahb", base + 0x68, 2, CLK_IS_CRITICAL); clks[IMX6UL_CLK_APBHDMA] = imx_clk_gate2("apbh_dma", "bch_podf", base + 0x68, 4); clks[IMX6UL_CLK_ASRC_IPG] = imx_clk_gate2_shared("asrc_ipg", "ahb", base + 0x68, 6, &share_count_asrc); clks[IMX6UL_CLK_ASRC_MEM] = imx_clk_gate2_shared("asrc_mem", "ahb", base + 0x68, 6, &share_count_asrc); @@ -360,6 +353,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node) clks[IMX6UL_CLK_UART2_SERIAL] = imx_clk_gate2("uart2_serial", "uart_podf", base + 0x68, 28); if (clk_on_imx6ull()) clks[IMX6UL_CLK_AIPSTZ3] = imx_clk_gate2("aips_tz3", "ahb", base + 0x80, 18); + clks[IMX6UL_CLK_GPIO2] = imx_clk_gate2("gpio2", "ipg", base + 0x68, 30); /* CCGR1 */ clks[IMX6UL_CLK_ECSPI1] = imx_clk_gate2("ecspi1", "ecspi_podf", base + 0x6c, 0); @@ -376,6 +370,8 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node) clks[IMX6UL_CLK_GPT1_SERIAL] = imx_clk_gate2("gpt1_serial", "perclk", base + 0x6c, 22); clks[IMX6UL_CLK_UART4_IPG] = imx_clk_gate2("uart4_ipg", "ipg", base + 0x6c, 24); clks[IMX6UL_CLK_UART4_SERIAL] = imx_clk_gate2("uart4_serial", "uart_podf", base + 0x6c, 24); + clks[IMX6UL_CLK_GPIO1] = imx_clk_gate2("gpio1", "ipg", base + 0x6c, 26); + clks[IMX6UL_CLK_GPIO5] = imx_clk_gate2("gpio5", "ipg", base + 0x6c, 30); /* CCGR2 */ if (clk_on_imx6ull()) { @@ -389,6 +385,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node) clks[IMX6UL_CLK_I2C3] = imx_clk_gate2("i2c3", "perclk", base + 0x70, 10); clks[IMX6UL_CLK_OCOTP] = imx_clk_gate2("ocotp", "ipg", base + 0x70, 12); clks[IMX6UL_CLK_IOMUXC] = imx_clk_gate2("iomuxc", "lcdif_podf", base + 0x70, 14); + clks[IMX6UL_CLK_GPIO3] = imx_clk_gate2("gpio3", "ipg", base + 0x70, 26); clks[IMX6UL_CLK_LCDIF_APB] = imx_clk_gate2("lcdif_apb", "axi", base + 0x70, 28); clks[IMX6UL_CLK_PXP] = imx_clk_gate2("pxp", "axi", base + 0x70, 30); @@ -405,11 +402,12 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node) clks[IMX6UL_CLK_UART6_IPG] = imx_clk_gate2("uart6_ipg", "ipg", base + 0x74, 6); clks[IMX6UL_CLK_UART6_SERIAL] = imx_clk_gate2("uart6_serial", "uart_podf", base + 0x74, 6); clks[IMX6UL_CLK_LCDIF_PIX] = imx_clk_gate2("lcdif_pix", "lcdif_podf", base + 0x74, 10); + clks[IMX6UL_CLK_GPIO4] = imx_clk_gate2("gpio4", "ipg", base + 0x74, 12); clks[IMX6UL_CLK_QSPI] = imx_clk_gate2("qspi1", "qspi1_podf", base + 0x74, 14); clks[IMX6UL_CLK_WDOG1] = imx_clk_gate2("wdog1", "ipg", base + 0x74, 16); - clks[IMX6UL_CLK_MMDC_P0_FAST] = imx_clk_gate("mmdc_p0_fast", "mmdc_podf", base + 0x74, 20); - clks[IMX6UL_CLK_MMDC_P0_IPG] = imx_clk_gate2("mmdc_p0_ipg", "ipg", base + 0x74, 24); - clks[IMX6UL_CLK_AXI] = imx_clk_gate("axi", "axi_podf", base + 0x74, 28); + clks[IMX6UL_CLK_MMDC_P0_FAST] = imx_clk_gate_flags("mmdc_p0_fast", "mmdc_podf", base + 0x74, 20, CLK_IS_CRITICAL); + clks[IMX6UL_CLK_MMDC_P0_IPG] = imx_clk_gate2_flags("mmdc_p0_ipg", "ipg", base + 0x74, 24, CLK_IS_CRITICAL); + clks[IMX6UL_CLK_AXI] = imx_clk_gate_flags("axi", "axi_podf", base + 0x74, 28, CLK_IS_CRITICAL); /* CCGR4 */ clks[IMX6UL_CLK_PER_BCH] = imx_clk_gate2("per_bch", "bch_podf", base + 0x78, 12); @@ -423,7 +421,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node) clks[IMX6UL_CLK_GPMI_APB] = imx_clk_gate2("gpmi_apb", "bch_podf", base + 0x78, 30); /* CCGR5 */ - clks[IMX6UL_CLK_ROM] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0); + clks[IMX6UL_CLK_ROM] = imx_clk_gate2_flags("rom", "ahb", base + 0x7c, 0, CLK_IS_CRITICAL); clks[IMX6UL_CLK_SDMA] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6); clks[IMX6UL_CLK_KPP] = imx_clk_gate2("kpp", "ipg", base + 0x7c, 8); clks[IMX6UL_CLK_WDOG2] = imx_clk_gate2("wdog2", "ipg", base + 0x7c, 10); @@ -497,10 +495,6 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node) clk_set_rate(clks[IMX6UL_CLK_ENET2_REF], 50000000); clk_set_rate(clks[IMX6UL_CLK_CSI], 24000000); - /* keep all the clks on just for bringup */ - for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) - clk_prepare_enable(clks[clks_init_on[i]]); - if (clk_on_imx6ull()) clk_prepare_enable(clks[IMX6UL_CLK_AIPSTZ3]); diff --git a/drivers/clk/ti/clk-7xx.c b/drivers/clk/ti/clk-7xx.c index fb249a1637a5..71a122b2dc67 100644 --- a/drivers/clk/ti/clk-7xx.c +++ b/drivers/clk/ti/clk-7xx.c @@ -708,6 +708,7 @@ static const struct omap_clkctrl_reg_data dra7_wkupaon_clkctrl_regs[] __initcons { DRA7_COUNTER_32K_CLKCTRL, NULL, 0, "wkupaon_iclk_mux" }, { DRA7_UART10_CLKCTRL, dra7_uart10_bit_data, CLKF_SW_SUP, "wkupaon_cm:clk:0060:24" }, { DRA7_DCAN1_CLKCTRL, dra7_dcan1_bit_data, CLKF_SW_SUP, "wkupaon_cm:clk:0068:24" }, + { DRA7_ADC_CLKCTRL, NULL, CLKF_SW_SUP, "mcan_clk"}, { 0 }, }; diff --git a/drivers/clocksource/timer-stm32.c b/drivers/clocksource/timer-stm32.c index e5cdc3af684c..2717f88c7904 100644 --- a/drivers/clocksource/timer-stm32.c +++ b/drivers/clocksource/timer-stm32.c @@ -304,8 +304,10 @@ static int __init stm32_timer_init(struct device_node *node) to->private_data = kzalloc(sizeof(struct stm32_timer_private), GFP_KERNEL); - if (!to->private_data) + if (!to->private_data) { + ret = -ENOMEM; goto deinit; + } rstc = of_reset_control_get(node, NULL); if (!IS_ERR(rstc)) { diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 1de5ec8d5ea3..ece120da3353 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -294,6 +294,7 @@ struct pstate_funcs { static struct pstate_funcs pstate_funcs __read_mostly; static int hwp_active __read_mostly; +static int hwp_mode_bdw __read_mostly; static bool per_cpu_limits __read_mostly; static bool hwp_boost __read_mostly; @@ -1413,7 +1414,15 @@ static void intel_pstate_get_cpu_pstates(struct cpudata *cpu) cpu->pstate.turbo_pstate = pstate_funcs.get_turbo(); cpu->pstate.scaling = pstate_funcs.get_scaling(); cpu->pstate.max_freq = cpu->pstate.max_pstate * cpu->pstate.scaling; - cpu->pstate.turbo_freq = cpu->pstate.turbo_pstate * cpu->pstate.scaling; + + if (hwp_active && !hwp_mode_bdw) { + unsigned int phy_max, current_max; + + intel_pstate_get_hwp_max(cpu->cpu, &phy_max, ¤t_max); + cpu->pstate.turbo_freq = phy_max * cpu->pstate.scaling; + } else { + cpu->pstate.turbo_freq = cpu->pstate.turbo_pstate * cpu->pstate.scaling; + } if (pstate_funcs.get_aperf_mperf_shift) cpu->aperf_mperf_shift = pstate_funcs.get_aperf_mperf_shift(); @@ -2467,28 +2476,36 @@ static inline bool intel_pstate_has_acpi_ppc(void) { return false; } static inline void intel_pstate_request_control_from_smm(void) {} #endif /* CONFIG_ACPI */ +#define INTEL_PSTATE_HWP_BROADWELL 0x01 + +#define ICPU_HWP(model, hwp_mode) \ + { X86_VENDOR_INTEL, 6, model, X86_FEATURE_HWP, hwp_mode } + static const struct x86_cpu_id hwp_support_ids[] __initconst = { - { X86_VENDOR_INTEL, 6, X86_MODEL_ANY, X86_FEATURE_HWP }, + ICPU_HWP(INTEL_FAM6_BROADWELL_X, INTEL_PSTATE_HWP_BROADWELL), + ICPU_HWP(INTEL_FAM6_BROADWELL_XEON_D, INTEL_PSTATE_HWP_BROADWELL), + ICPU_HWP(X86_MODEL_ANY, 0), {} }; static int __init intel_pstate_init(void) { + const struct x86_cpu_id *id; int rc; if (no_load) return -ENODEV; - if (x86_match_cpu(hwp_support_ids)) { + id = x86_match_cpu(hwp_support_ids); + if (id) { copy_cpu_funcs(&core_funcs); if (!no_hwp) { hwp_active++; + hwp_mode_bdw = id->driver_data; intel_pstate.attr = hwp_cpufreq_attrs; goto hwp_cpu_matched; } } else { - const struct x86_cpu_id *id; - id = x86_match_cpu(intel_pstate_cpu_ids); if (!id) return -ENODEV; diff --git a/drivers/cpufreq/qcom-cpufreq-kryo.c b/drivers/cpufreq/qcom-cpufreq-kryo.c index d049fe4b80c4..29389accf3e9 100644 --- a/drivers/cpufreq/qcom-cpufreq-kryo.c +++ b/drivers/cpufreq/qcom-cpufreq-kryo.c @@ -42,6 +42,8 @@ enum _msm8996_version { NUM_OF_MSM8996_VERSIONS, }; +struct platform_device *cpufreq_dt_pdev, *kryo_cpufreq_pdev; + static enum _msm8996_version __init qcom_cpufreq_kryo_get_msm_id(void) { size_t len; @@ -74,7 +76,6 @@ static enum _msm8996_version __init qcom_cpufreq_kryo_get_msm_id(void) static int qcom_cpufreq_kryo_probe(struct platform_device *pdev) { struct opp_table *opp_tables[NR_CPUS] = {0}; - struct platform_device *cpufreq_dt_pdev; enum _msm8996_version msm8996_version; struct nvmem_cell *speedbin_nvmem; struct device_node *np; @@ -86,8 +87,8 @@ static int qcom_cpufreq_kryo_probe(struct platform_device *pdev) int ret; cpu_dev = get_cpu_device(0); - if (NULL == cpu_dev) - ret = -ENODEV; + if (!cpu_dev) + return -ENODEV; msm8996_version = qcom_cpufreq_kryo_get_msm_id(); if (NUM_OF_MSM8996_VERSIONS == msm8996_version) { @@ -96,8 +97,8 @@ static int qcom_cpufreq_kryo_probe(struct platform_device *pdev) } np = dev_pm_opp_of_get_opp_desc_node(cpu_dev); - if (IS_ERR(np)) - return PTR_ERR(np); + if (!np) + return -ENOENT; ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu"); if (!ret) { @@ -115,6 +116,8 @@ static int qcom_cpufreq_kryo_probe(struct platform_device *pdev) speedbin = nvmem_cell_read(speedbin_nvmem, &len); nvmem_cell_put(speedbin_nvmem); + if (IS_ERR(speedbin)) + return PTR_ERR(speedbin); switch (msm8996_version) { case MSM8996_V3: @@ -127,6 +130,7 @@ static int qcom_cpufreq_kryo_probe(struct platform_device *pdev) BUG(); break; } + kfree(speedbin); for_each_possible_cpu(cpu) { cpu_dev = get_cpu_device(cpu); @@ -162,8 +166,15 @@ free_opp: return ret; } +static int qcom_cpufreq_kryo_remove(struct platform_device *pdev) +{ + platform_device_unregister(cpufreq_dt_pdev); + return 0; +} + static struct platform_driver qcom_cpufreq_kryo_driver = { .probe = qcom_cpufreq_kryo_probe, + .remove = qcom_cpufreq_kryo_remove, .driver = { .name = "qcom-cpufreq-kryo", }, @@ -198,8 +209,9 @@ static int __init qcom_cpufreq_kryo_init(void) if (unlikely(ret < 0)) return ret; - ret = PTR_ERR_OR_ZERO(platform_device_register_simple( - "qcom-cpufreq-kryo", -1, NULL, 0)); + kryo_cpufreq_pdev = platform_device_register_simple( + "qcom-cpufreq-kryo", -1, NULL, 0); + ret = PTR_ERR_OR_ZERO(kryo_cpufreq_pdev); if (0 == ret) return 0; @@ -208,5 +220,12 @@ static int __init qcom_cpufreq_kryo_init(void) } module_init(qcom_cpufreq_kryo_init); +static void __init qcom_cpufreq_kryo_exit(void) +{ + platform_device_unregister(kryo_cpufreq_pdev); + platform_driver_unregister(&qcom_cpufreq_kryo_driver); +} +module_exit(qcom_cpufreq_kryo_exit); + MODULE_DESCRIPTION("Qualcomm Technologies, Inc. Kryo CPUfreq driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/crypto/chelsio/chtls/chtls_io.c b/drivers/crypto/chelsio/chtls/chtls_io.c index 00c7aab8e7d0..afebbd87c4aa 100644 --- a/drivers/crypto/chelsio/chtls/chtls_io.c +++ b/drivers/crypto/chelsio/chtls/chtls_io.c @@ -1548,15 +1548,14 @@ skip_copy: tp->urg_data = 0; if ((avail + offset) >= skb->len) { - if (likely(skb)) - chtls_free_skb(sk, skb); - buffers_freed++; if (ULP_SKB_CB(skb)->flags & ULPCB_FLAG_TLS_HDR) { tp->copied_seq += skb->len; hws->rcvpld = skb->hdr_len; } else { tp->copied_seq += hws->rcvpld; } + chtls_free_skb(sk, skb); + buffers_freed++; hws->copied_seq = 0; if (copied >= target && !skb_peek(&sk->sk_receive_queue)) diff --git a/drivers/dax/super.c b/drivers/dax/super.c index 903d9c473749..45276abf03aa 100644 --- a/drivers/dax/super.c +++ b/drivers/dax/super.c @@ -86,6 +86,7 @@ bool __bdev_dax_supported(struct block_device *bdev, int blocksize) { struct dax_device *dax_dev; bool dax_enabled = false; + struct request_queue *q; pgoff_t pgoff; int err, id; void *kaddr; @@ -99,6 +100,13 @@ bool __bdev_dax_supported(struct block_device *bdev, int blocksize) return false; } + q = bdev_get_queue(bdev); + if (!q || !blk_queue_dax(q)) { + pr_debug("%s: error: request queue doesn't support dax\n", + bdevname(bdev, buf)); + return false; + } + err = bdev_dax_pgoff(bdev, 0, PAGE_SIZE, &pgoff); if (err) { pr_debug("%s: error: unaligned partition for dax\n", diff --git a/drivers/firmware/dmi-id.c b/drivers/firmware/dmi-id.c index 951b6c79f166..624a11cb07e2 100644 --- a/drivers/firmware/dmi-id.c +++ b/drivers/firmware/dmi-id.c @@ -47,6 +47,7 @@ DEFINE_DMI_ATTR_WITH_SHOW(product_name, 0444, DMI_PRODUCT_NAME); DEFINE_DMI_ATTR_WITH_SHOW(product_version, 0444, DMI_PRODUCT_VERSION); DEFINE_DMI_ATTR_WITH_SHOW(product_serial, 0400, DMI_PRODUCT_SERIAL); DEFINE_DMI_ATTR_WITH_SHOW(product_uuid, 0400, DMI_PRODUCT_UUID); +DEFINE_DMI_ATTR_WITH_SHOW(product_sku, 0444, DMI_PRODUCT_SKU); DEFINE_DMI_ATTR_WITH_SHOW(product_family, 0444, DMI_PRODUCT_FAMILY); DEFINE_DMI_ATTR_WITH_SHOW(board_vendor, 0444, DMI_BOARD_VENDOR); DEFINE_DMI_ATTR_WITH_SHOW(board_name, 0444, DMI_BOARD_NAME); @@ -193,6 +194,7 @@ static void __init dmi_id_init_attr_table(void) ADD_DMI_ATTR(product_serial, DMI_PRODUCT_SERIAL); ADD_DMI_ATTR(product_uuid, DMI_PRODUCT_UUID); ADD_DMI_ATTR(product_family, DMI_PRODUCT_FAMILY); + ADD_DMI_ATTR(product_sku, DMI_PRODUCT_SKU); ADD_DMI_ATTR(board_vendor, DMI_BOARD_VENDOR); ADD_DMI_ATTR(board_name, DMI_BOARD_NAME); ADD_DMI_ATTR(board_version, DMI_BOARD_VERSION); diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c index 54e66adef252..f2483548cde9 100644 --- a/drivers/firmware/dmi_scan.c +++ b/drivers/firmware/dmi_scan.c @@ -447,6 +447,7 @@ static void __init dmi_decode(const struct dmi_header *dm, void *dummy) dmi_save_ident(dm, DMI_PRODUCT_VERSION, 6); dmi_save_ident(dm, DMI_PRODUCT_SERIAL, 7); dmi_save_uuid(dm, DMI_PRODUCT_UUID, 8); + dmi_save_ident(dm, DMI_PRODUCT_SKU, 25); dmi_save_ident(dm, DMI_PRODUCT_FAMILY, 26); break; case 2: /* Base Board Information */ diff --git a/drivers/firmware/efi/libstub/tpm.c b/drivers/firmware/efi/libstub/tpm.c index caa37a6dd9d4..a90b0b8fc69a 100644 --- a/drivers/firmware/efi/libstub/tpm.c +++ b/drivers/firmware/efi/libstub/tpm.c @@ -64,7 +64,7 @@ static void efi_retrieve_tpm2_eventlog_1_2(efi_system_table_t *sys_table_arg) efi_guid_t tcg2_guid = EFI_TCG2_PROTOCOL_GUID; efi_guid_t linux_eventlog_guid = LINUX_EFI_TPM_EVENT_LOG_GUID; efi_status_t status; - efi_physical_addr_t log_location, log_last_entry; + efi_physical_addr_t log_location = 0, log_last_entry = 0; struct linux_efi_tpm_eventlog *log_tbl = NULL; unsigned long first_entry_addr, last_entry_addr; size_t log_size, last_entry_size; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 3317d1536f4f..6e5284e6c028 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -2158,10 +2158,18 @@ bool amdgpu_device_asic_has_dc_support(enum amd_asic_type asic_type) switch (asic_type) { #if defined(CONFIG_DRM_AMD_DC) case CHIP_BONAIRE: - case CHIP_HAWAII: case CHIP_KAVERI: case CHIP_KABINI: case CHIP_MULLINS: + /* + * We have systems in the wild with these ASICs that require + * LVDS and VGA support which is not supported with DC. + * + * Fallback to the non-DC driver here by default so as not to + * cause regressions. + */ + return amdgpu_dc > 0; + case CHIP_HAWAII: case CHIP_CARRIZO: case CHIP_STONEY: case CHIP_POLARIS10: diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c index 39ec6b8890a1..e74d620d9699 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c @@ -376,7 +376,7 @@ int amdgpu_fence_driver_start_ring(struct amdgpu_ring *ring, struct amdgpu_device *adev = ring->adev; uint64_t index; - if (ring != &adev->uvd.inst[ring->me].ring) { + if (ring->funcs->type != AMDGPU_RING_TYPE_UVD) { ring->fence_drv.cpu_addr = &adev->wb.wb[ring->fence_offs]; ring->fence_drv.gpu_addr = adev->wb.gpu_addr + (ring->fence_offs * 4); } else { diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c index 5e4e1bd90383..3526efa8960e 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c @@ -762,8 +762,7 @@ int amdgpu_bo_pin_restricted(struct amdgpu_bo *bo, u32 domain, domain = amdgpu_mem_type_to_domain(bo->tbo.mem.mem_type); if (domain == AMDGPU_GEM_DOMAIN_VRAM) { adev->vram_pin_size += amdgpu_bo_size(bo); - if (bo->flags & AMDGPU_GEM_CREATE_NO_CPU_ACCESS) - adev->invisible_pin_size += amdgpu_bo_size(bo); + adev->invisible_pin_size += amdgpu_vram_mgr_bo_invisible_size(bo); } else if (domain == AMDGPU_GEM_DOMAIN_GTT) { adev->gart_pin_size += amdgpu_bo_size(bo); } @@ -790,25 +789,22 @@ int amdgpu_bo_unpin(struct amdgpu_bo *bo) bo->pin_count--; if (bo->pin_count) return 0; - for (i = 0; i < bo->placement.num_placement; i++) { - bo->placements[i].lpfn = 0; - bo->placements[i].flags &= ~TTM_PL_FLAG_NO_EVICT; - } - r = ttm_bo_validate(&bo->tbo, &bo->placement, &ctx); - if (unlikely(r)) { - dev_err(adev->dev, "%p validate failed for unpin\n", bo); - goto error; - } if (bo->tbo.mem.mem_type == TTM_PL_VRAM) { adev->vram_pin_size -= amdgpu_bo_size(bo); - if (bo->flags & AMDGPU_GEM_CREATE_NO_CPU_ACCESS) - adev->invisible_pin_size -= amdgpu_bo_size(bo); + adev->invisible_pin_size -= amdgpu_vram_mgr_bo_invisible_size(bo); } else if (bo->tbo.mem.mem_type == TTM_PL_TT) { adev->gart_pin_size -= amdgpu_bo_size(bo); } -error: + for (i = 0; i < bo->placement.num_placement; i++) { + bo->placements[i].lpfn = 0; + bo->placements[i].flags &= ~TTM_PL_FLAG_NO_EVICT; + } + r = ttm_bo_validate(&bo->tbo, &bo->placement, &ctx); + if (unlikely(r)) + dev_err(adev->dev, "%p validate failed for unpin\n", bo); + return r; } diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.h index e969c879d87e..e5da4654b630 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.h @@ -73,6 +73,7 @@ bool amdgpu_gtt_mgr_has_gart_addr(struct ttm_mem_reg *mem); uint64_t amdgpu_gtt_mgr_usage(struct ttm_mem_type_manager *man); int amdgpu_gtt_mgr_recover(struct ttm_mem_type_manager *man); +u64 amdgpu_vram_mgr_bo_invisible_size(struct amdgpu_bo *bo); uint64_t amdgpu_vram_mgr_usage(struct ttm_mem_type_manager *man); uint64_t amdgpu_vram_mgr_vis_usage(struct ttm_mem_type_manager *man); diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c index bcf68f80bbf0..3ff08e326838 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c @@ -130,7 +130,7 @@ int amdgpu_uvd_sw_init(struct amdgpu_device *adev) unsigned version_major, version_minor, family_id; int i, j, r; - INIT_DELAYED_WORK(&adev->uvd.inst->idle_work, amdgpu_uvd_idle_work_handler); + INIT_DELAYED_WORK(&adev->uvd.idle_work, amdgpu_uvd_idle_work_handler); switch (adev->asic_type) { #ifdef CONFIG_DRM_AMDGPU_CIK @@ -314,12 +314,12 @@ int amdgpu_uvd_suspend(struct amdgpu_device *adev) void *ptr; int i, j; + cancel_delayed_work_sync(&adev->uvd.idle_work); + for (j = 0; j < adev->uvd.num_uvd_inst; ++j) { if (adev->uvd.inst[j].vcpu_bo == NULL) continue; - cancel_delayed_work_sync(&adev->uvd.inst[j].idle_work); - /* only valid for physical mode */ if (adev->asic_type < CHIP_POLARIS10) { for (i = 0; i < adev->uvd.max_handles; ++i) @@ -1145,7 +1145,7 @@ int amdgpu_uvd_get_destroy_msg(struct amdgpu_ring *ring, uint32_t handle, static void amdgpu_uvd_idle_work_handler(struct work_struct *work) { struct amdgpu_device *adev = - container_of(work, struct amdgpu_device, uvd.inst->idle_work.work); + container_of(work, struct amdgpu_device, uvd.idle_work.work); unsigned fences = 0, i, j; for (i = 0; i < adev->uvd.num_uvd_inst; ++i) { @@ -1167,7 +1167,7 @@ static void amdgpu_uvd_idle_work_handler(struct work_struct *work) AMD_CG_STATE_GATE); } } else { - schedule_delayed_work(&adev->uvd.inst->idle_work, UVD_IDLE_TIMEOUT); + schedule_delayed_work(&adev->uvd.idle_work, UVD_IDLE_TIMEOUT); } } @@ -1179,7 +1179,7 @@ void amdgpu_uvd_ring_begin_use(struct amdgpu_ring *ring) if (amdgpu_sriov_vf(adev)) return; - set_clocks = !cancel_delayed_work_sync(&adev->uvd.inst->idle_work); + set_clocks = !cancel_delayed_work_sync(&adev->uvd.idle_work); if (set_clocks) { if (adev->pm.dpm_enabled) { amdgpu_dpm_enable_uvd(adev, true); @@ -1196,7 +1196,7 @@ void amdgpu_uvd_ring_begin_use(struct amdgpu_ring *ring) void amdgpu_uvd_ring_end_use(struct amdgpu_ring *ring) { if (!amdgpu_sriov_vf(ring->adev)) - schedule_delayed_work(&ring->adev->uvd.inst->idle_work, UVD_IDLE_TIMEOUT); + schedule_delayed_work(&ring->adev->uvd.idle_work, UVD_IDLE_TIMEOUT); } /** diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.h index b1579fba134c..8b23a1b00c76 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.h @@ -44,7 +44,6 @@ struct amdgpu_uvd_inst { void *saved_bo; atomic_t handles[AMDGPU_MAX_UVD_HANDLES]; struct drm_file *filp[AMDGPU_MAX_UVD_HANDLES]; - struct delayed_work idle_work; struct amdgpu_ring ring; struct amdgpu_ring ring_enc[AMDGPU_MAX_UVD_ENC_RINGS]; struct amdgpu_irq_src irq; @@ -62,6 +61,7 @@ struct amdgpu_uvd { bool address_64_bit; bool use_ctx_buf; struct amdgpu_uvd_inst inst[AMDGPU_MAX_UVD_INSTANCES]; + struct delayed_work idle_work; }; int amdgpu_uvd_sw_init(struct amdgpu_device *adev); diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c index 127e87b470ff..1b4ad9b2a755 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c @@ -52,7 +52,7 @@ int amdgpu_vcn_sw_init(struct amdgpu_device *adev) unsigned long bo_size; const char *fw_name; const struct common_firmware_header *hdr; - unsigned version_major, version_minor, family_id; + unsigned char fw_check; int r; INIT_DELAYED_WORK(&adev->vcn.idle_work, amdgpu_vcn_idle_work_handler); @@ -83,12 +83,33 @@ int amdgpu_vcn_sw_init(struct amdgpu_device *adev) hdr = (const struct common_firmware_header *)adev->vcn.fw->data; adev->vcn.fw_version = le32_to_cpu(hdr->ucode_version); - family_id = le32_to_cpu(hdr->ucode_version) & 0xff; - version_major = (le32_to_cpu(hdr->ucode_version) >> 24) & 0xff; - version_minor = (le32_to_cpu(hdr->ucode_version) >> 8) & 0xff; - DRM_INFO("Found VCN firmware Version: %hu.%hu Family ID: %hu\n", - version_major, version_minor, family_id); + /* Bit 20-23, it is encode major and non-zero for new naming convention. + * This field is part of version minor and DRM_DISABLED_FLAG in old naming + * convention. Since the l:wq!atest version minor is 0x5B and DRM_DISABLED_FLAG + * is zero in old naming convention, this field is always zero so far. + * These four bits are used to tell which naming convention is present. + */ + fw_check = (le32_to_cpu(hdr->ucode_version) >> 20) & 0xf; + if (fw_check) { + unsigned int dec_ver, enc_major, enc_minor, vep, fw_rev; + + fw_rev = le32_to_cpu(hdr->ucode_version) & 0xfff; + enc_minor = (le32_to_cpu(hdr->ucode_version) >> 12) & 0xff; + enc_major = fw_check; + dec_ver = (le32_to_cpu(hdr->ucode_version) >> 24) & 0xf; + vep = (le32_to_cpu(hdr->ucode_version) >> 28) & 0xf; + DRM_INFO("Found VCN firmware Version ENC: %hu.%hu DEC: %hu VEP: %hu Revision: %hu\n", + enc_major, enc_minor, dec_ver, vep, fw_rev); + } else { + unsigned int version_major, version_minor, family_id; + + family_id = le32_to_cpu(hdr->ucode_version) & 0xff; + version_major = (le32_to_cpu(hdr->ucode_version) >> 24) & 0xff; + version_minor = (le32_to_cpu(hdr->ucode_version) >> 8) & 0xff; + DRM_INFO("Found VCN firmware Version: %hu.%hu Family ID: %hu\n", + version_major, version_minor, family_id); + } bo_size = AMDGPU_GPU_PAGE_ALIGN(le32_to_cpu(hdr->ucode_size_bytes) + 8) + AMDGPU_VCN_STACK_SIZE + AMDGPU_VCN_HEAP_SIZE diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c index b0eb2f537392..edf16b2b957a 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c @@ -1463,7 +1463,9 @@ static int amdgpu_vm_bo_split_mapping(struct amdgpu_device *adev, uint64_t count; max_entries = min(max_entries, 16ull * 1024ull); - for (count = 1; count < max_entries; ++count) { + for (count = 1; + count < max_entries / (PAGE_SIZE / AMDGPU_GPU_PAGE_SIZE); + ++count) { uint64_t idx = pfn + count; if (pages_addr[idx] != @@ -1476,7 +1478,7 @@ static int amdgpu_vm_bo_split_mapping(struct amdgpu_device *adev, dma_addr = pages_addr; } else { addr = pages_addr[pfn]; - max_entries = count; + max_entries = count * (PAGE_SIZE / AMDGPU_GPU_PAGE_SIZE); } } else if (flags & AMDGPU_PTE_VALID) { @@ -1491,7 +1493,7 @@ static int amdgpu_vm_bo_split_mapping(struct amdgpu_device *adev, if (r) return r; - pfn += last - start + 1; + pfn += (last - start + 1) / (PAGE_SIZE / AMDGPU_GPU_PAGE_SIZE); if (nodes && nodes->size == pfn) { pfn = 0; ++nodes; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c index 9aca653bec07..b6333f92ba45 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c @@ -97,6 +97,38 @@ static u64 amdgpu_vram_mgr_vis_size(struct amdgpu_device *adev, } /** + * amdgpu_vram_mgr_bo_invisible_size - CPU invisible BO size + * + * @bo: &amdgpu_bo buffer object (must be in VRAM) + * + * Returns: + * How much of the given &amdgpu_bo buffer object lies in CPU invisible VRAM. + */ +u64 amdgpu_vram_mgr_bo_invisible_size(struct amdgpu_bo *bo) +{ + struct amdgpu_device *adev = amdgpu_ttm_adev(bo->tbo.bdev); + struct ttm_mem_reg *mem = &bo->tbo.mem; + struct drm_mm_node *nodes = mem->mm_node; + unsigned pages = mem->num_pages; + u64 usage = 0; + + if (adev->gmc.visible_vram_size == adev->gmc.real_vram_size) + return 0; + + if (mem->start >= adev->gmc.visible_vram_size >> PAGE_SHIFT) + return amdgpu_bo_size(bo); + + while (nodes && pages) { + usage += nodes->size << PAGE_SHIFT; + usage -= amdgpu_vram_mgr_vis_size(adev, nodes); + pages -= nodes->size; + ++nodes; + } + + return usage; +} + +/** * amdgpu_vram_mgr_new - allocate new ranges * * @man: TTM memory type manager @@ -135,7 +167,8 @@ static int amdgpu_vram_mgr_new(struct ttm_mem_type_manager *man, num_nodes = DIV_ROUND_UP(mem->num_pages, pages_per_node); } - nodes = kcalloc(num_nodes, sizeof(*nodes), GFP_KERNEL); + nodes = kvmalloc_array(num_nodes, sizeof(*nodes), + GFP_KERNEL | __GFP_ZERO); if (!nodes) return -ENOMEM; @@ -190,7 +223,7 @@ error: drm_mm_remove_node(&nodes[i]); spin_unlock(&mgr->lock); - kfree(nodes); + kvfree(nodes); return r == -ENOSPC ? 0 : r; } @@ -229,7 +262,7 @@ static void amdgpu_vram_mgr_del(struct ttm_mem_type_manager *man, atomic64_sub(usage, &mgr->usage); atomic64_sub(vis_usage, &mgr->vis_usage); - kfree(mem->mm_node); + kvfree(mem->mm_node); mem->mm_node = NULL; } diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index f9add85157e7..3a8d6356afc2 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -3928,10 +3928,11 @@ static void amdgpu_dm_do_flip(struct drm_crtc *crtc, if (acrtc->base.state->event) prepare_flip_isr(acrtc); + spin_unlock_irqrestore(&crtc->dev->event_lock, flags); + surface_updates->surface = dc_stream_get_status(acrtc_state->stream)->plane_states[0]; surface_updates->flip_addr = &addr; - dc_commit_updates_for_stream(adev->dm.dc, surface_updates, 1, @@ -3944,9 +3945,6 @@ static void amdgpu_dm_do_flip(struct drm_crtc *crtc, __func__, addr.address.grph.addr.high_part, addr.address.grph.addr.low_part); - - - spin_unlock_irqrestore(&crtc->dev->event_lock, flags); } /* @@ -4206,6 +4204,7 @@ static void amdgpu_dm_atomic_commit_tail(struct drm_atomic_state *state) struct drm_connector *connector; struct drm_connector_state *old_con_state, *new_con_state; struct dm_crtc_state *dm_old_crtc_state, *dm_new_crtc_state; + int crtc_disable_count = 0; drm_atomic_helper_update_legacy_modeset_state(dev, state); @@ -4410,6 +4409,9 @@ static void amdgpu_dm_atomic_commit_tail(struct drm_atomic_state *state) struct amdgpu_crtc *acrtc = to_amdgpu_crtc(crtc); bool modeset_needed; + if (old_crtc_state->active && !new_crtc_state->active) + crtc_disable_count++; + dm_new_crtc_state = to_dm_crtc_state(new_crtc_state); dm_old_crtc_state = to_dm_crtc_state(old_crtc_state); modeset_needed = modeset_required( @@ -4463,11 +4465,9 @@ static void amdgpu_dm_atomic_commit_tail(struct drm_atomic_state *state) * so we can put the GPU into runtime suspend if we're not driving any * displays anymore */ + for (i = 0; i < crtc_disable_count; i++) + pm_runtime_put_autosuspend(dev->dev); pm_runtime_mark_last_busy(dev->dev); - for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) { - if (old_crtc_state->active && !new_crtc_state->active) - pm_runtime_put_autosuspend(dev->dev); - } } diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_powertune.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_powertune.c index dbe4b1f66784..22364875a943 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_powertune.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_powertune.c @@ -1090,7 +1090,7 @@ static int vega10_disable_se_edc_config(struct pp_hwmgr *hwmgr) static int vega10_enable_psm_gc_edc_config(struct pp_hwmgr *hwmgr) { struct amdgpu_device *adev = hwmgr->adev; - int result; + int result = 0; uint32_t num_se = 0; uint32_t count, data; diff --git a/drivers/gpu/drm/arm/malidp_drv.c b/drivers/gpu/drm/arm/malidp_drv.c index 8d20faa198cf..0a788d76ed5f 100644 --- a/drivers/gpu/drm/arm/malidp_drv.c +++ b/drivers/gpu/drm/arm/malidp_drv.c @@ -278,7 +278,6 @@ static int malidp_init(struct drm_device *drm) static void malidp_fini(struct drm_device *drm) { - drm_atomic_helper_shutdown(drm); drm_mode_config_cleanup(drm); } @@ -646,6 +645,7 @@ vblank_fail: malidp_de_irq_fini(drm); drm->irq_enabled = false; irq_init_fail: + drm_atomic_helper_shutdown(drm); component_unbind_all(dev, drm); bind_fail: of_node_put(malidp->crtc.port); @@ -681,6 +681,7 @@ static void malidp_unbind(struct device *dev) malidp_se_irq_fini(drm); malidp_de_irq_fini(drm); drm->irq_enabled = false; + drm_atomic_helper_shutdown(drm); component_unbind_all(dev, drm); of_node_put(malidp->crtc.port); malidp->crtc.port = NULL; diff --git a/drivers/gpu/drm/arm/malidp_hw.c b/drivers/gpu/drm/arm/malidp_hw.c index d789b46dc817..069783e715f1 100644 --- a/drivers/gpu/drm/arm/malidp_hw.c +++ b/drivers/gpu/drm/arm/malidp_hw.c @@ -634,7 +634,8 @@ const struct malidp_hw malidp_device[MALIDP_MAX_DEVICES] = { .vsync_irq = MALIDP500_DE_IRQ_VSYNC, }, .se_irq_map = { - .irq_mask = MALIDP500_SE_IRQ_CONF_MODE, + .irq_mask = MALIDP500_SE_IRQ_CONF_MODE | + MALIDP500_SE_IRQ_GLOBAL, .vsync_irq = 0, }, .dc_irq_map = { diff --git a/drivers/gpu/drm/arm/malidp_planes.c b/drivers/gpu/drm/arm/malidp_planes.c index 7a44897c50fe..29409a65d864 100644 --- a/drivers/gpu/drm/arm/malidp_planes.c +++ b/drivers/gpu/drm/arm/malidp_planes.c @@ -23,6 +23,7 @@ /* Layer specific register offsets */ #define MALIDP_LAYER_FORMAT 0x000 +#define LAYER_FORMAT_MASK 0x3f #define MALIDP_LAYER_CONTROL 0x004 #define LAYER_ENABLE (1 << 0) #define LAYER_FLOWCFG_MASK 7 @@ -235,8 +236,8 @@ static int malidp_de_plane_check(struct drm_plane *plane, if (state->rotation & MALIDP_ROTATED_MASK) { int val; - val = mp->hwdev->hw->rotmem_required(mp->hwdev, state->crtc_h, - state->crtc_w, + val = mp->hwdev->hw->rotmem_required(mp->hwdev, state->crtc_w, + state->crtc_h, fb->format->format); if (val < 0) return val; @@ -337,7 +338,9 @@ static void malidp_de_plane_update(struct drm_plane *plane, dest_w = plane->state->crtc_w; dest_h = plane->state->crtc_h; - malidp_hw_write(mp->hwdev, ms->format, mp->layer->base); + val = malidp_hw_read(mp->hwdev, mp->layer->base); + val = (val & ~LAYER_FORMAT_MASK) | ms->format; + malidp_hw_write(mp->hwdev, val, mp->layer->base); for (i = 0; i < ms->n_planes; i++) { /* calculate the offset for the layer's plane registers */ diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c index 73c875db45f4..47e0992f3908 100644 --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c @@ -839,7 +839,7 @@ static int atmel_hlcdc_plane_init_properties(struct atmel_hlcdc_plane *plane) return ret; } - if (desc->layout.xstride && desc->layout.pstride) { + if (desc->layout.xstride[0] && desc->layout.pstride[0]) { int ret; ret = drm_plane_create_rotation_property(&plane->base, diff --git a/drivers/gpu/drm/bridge/sil-sii8620.c b/drivers/gpu/drm/bridge/sil-sii8620.c index 7ab36042a822..250effa0e6b8 100644 --- a/drivers/gpu/drm/bridge/sil-sii8620.c +++ b/drivers/gpu/drm/bridge/sil-sii8620.c @@ -36,8 +36,11 @@ #define SII8620_BURST_BUF_LEN 288 #define VAL_RX_HDMI_CTRL2_DEFVAL VAL_RX_HDMI_CTRL2_IDLE_CNT(3) -#define MHL1_MAX_LCLK 225000 -#define MHL3_MAX_LCLK 600000 + +#define MHL1_MAX_PCLK 75000 +#define MHL1_MAX_PCLK_PP_MODE 150000 +#define MHL3_MAX_PCLK 200000 +#define MHL3_MAX_PCLK_PP_MODE 300000 enum sii8620_mode { CM_DISCONNECTED, @@ -80,6 +83,9 @@ struct sii8620 { u8 devcap[MHL_DCAP_SIZE]; u8 xdevcap[MHL_XDC_SIZE]; u8 avif[HDMI_INFOFRAME_SIZE(AVI)]; + bool feature_complete; + bool devcap_read; + bool sink_detected; struct edid *edid; unsigned int gen2_write_burst:1; enum sii8620_mt_state mt_state; @@ -476,7 +482,7 @@ static void sii8620_update_array(u8 *dst, u8 *src, int count) } } -static void sii8620_sink_detected(struct sii8620 *ctx, int ret) +static void sii8620_identify_sink(struct sii8620 *ctx) { static const char * const sink_str[] = { [SINK_NONE] = "NONE", @@ -487,7 +493,7 @@ static void sii8620_sink_detected(struct sii8620 *ctx, int ret) char sink_name[20]; struct device *dev = ctx->dev; - if (ret < 0) + if (!ctx->sink_detected || !ctx->devcap_read) return; sii8620_fetch_edid(ctx); @@ -496,6 +502,7 @@ static void sii8620_sink_detected(struct sii8620 *ctx, int ret) sii8620_mhl_disconnected(ctx); return; } + sii8620_set_upstream_edid(ctx); if (drm_detect_hdmi_monitor(ctx->edid)) ctx->sink_type = SINK_HDMI; @@ -508,53 +515,6 @@ static void sii8620_sink_detected(struct sii8620 *ctx, int ret) sink_str[ctx->sink_type], sink_name); } -static void sii8620_hsic_init(struct sii8620 *ctx) -{ - if (!sii8620_is_mhl3(ctx)) - return; - - sii8620_write(ctx, REG_FCGC, - BIT_FCGC_HSIC_HOSTMODE | BIT_FCGC_HSIC_ENABLE); - sii8620_setbits(ctx, REG_HRXCTRL3, - BIT_HRXCTRL3_HRX_STAY_RESET | BIT_HRXCTRL3_STATUS_EN, ~0); - sii8620_setbits(ctx, REG_TTXNUMB, MSK_TTXNUMB_TTX_NUMBPS, 4); - sii8620_setbits(ctx, REG_TRXCTRL, BIT_TRXCTRL_TRX_FROM_SE_COC, ~0); - sii8620_setbits(ctx, REG_HTXCTRL, BIT_HTXCTRL_HTX_DRVCONN1, 0); - sii8620_setbits(ctx, REG_KEEPER, MSK_KEEPER_MODE, VAL_KEEPER_MODE_HOST); - sii8620_write_seq_static(ctx, - REG_TDMLLCTL, 0, - REG_UTSRST, BIT_UTSRST_HRX_SRST | BIT_UTSRST_HTX_SRST | - BIT_UTSRST_KEEPER_SRST | BIT_UTSRST_FC_SRST, - REG_UTSRST, BIT_UTSRST_HRX_SRST | BIT_UTSRST_HTX_SRST, - REG_HRXINTL, 0xff, - REG_HRXINTH, 0xff, - REG_TTXINTL, 0xff, - REG_TTXINTH, 0xff, - REG_TRXINTL, 0xff, - REG_TRXINTH, 0xff, - REG_HTXINTL, 0xff, - REG_HTXINTH, 0xff, - REG_FCINTR0, 0xff, - REG_FCINTR1, 0xff, - REG_FCINTR2, 0xff, - REG_FCINTR3, 0xff, - REG_FCINTR4, 0xff, - REG_FCINTR5, 0xff, - REG_FCINTR6, 0xff, - REG_FCINTR7, 0xff - ); -} - -static void sii8620_edid_read(struct sii8620 *ctx, int ret) -{ - if (ret < 0) - return; - - sii8620_set_upstream_edid(ctx); - sii8620_hsic_init(ctx); - sii8620_enable_hpd(ctx); -} - static void sii8620_mr_devcap(struct sii8620 *ctx) { u8 dcap[MHL_DCAP_SIZE]; @@ -570,6 +530,8 @@ static void sii8620_mr_devcap(struct sii8620 *ctx) dcap[MHL_DCAP_ADOPTER_ID_H], dcap[MHL_DCAP_ADOPTER_ID_L], dcap[MHL_DCAP_DEVICE_ID_H], dcap[MHL_DCAP_DEVICE_ID_L]); sii8620_update_array(ctx->devcap, dcap, MHL_DCAP_SIZE); + ctx->devcap_read = true; + sii8620_identify_sink(ctx); } static void sii8620_mr_xdevcap(struct sii8620 *ctx) @@ -807,6 +769,7 @@ static void sii8620_burst_rx_all(struct sii8620 *ctx) static void sii8620_fetch_edid(struct sii8620 *ctx) { u8 lm_ddc, ddc_cmd, int3, cbus; + unsigned long timeout; int fetched, i; int edid_len = EDID_LENGTH; u8 *edid; @@ -856,23 +819,31 @@ static void sii8620_fetch_edid(struct sii8620 *ctx) REG_DDC_CMD, ddc_cmd | VAL_DDC_CMD_ENH_DDC_READ_NO_ACK ); - do { - int3 = sii8620_readb(ctx, REG_INTR3); + int3 = 0; + timeout = jiffies + msecs_to_jiffies(200); + for (;;) { cbus = sii8620_readb(ctx, REG_CBUS_STATUS); - - if (int3 & BIT_DDC_CMD_DONE) - break; - - if (!(cbus & BIT_CBUS_STATUS_CBUS_CONNECTED)) { + if (~cbus & BIT_CBUS_STATUS_CBUS_CONNECTED) { + kfree(edid); + edid = NULL; + goto end; + } + if (int3 & BIT_DDC_CMD_DONE) { + if (sii8620_readb(ctx, REG_DDC_DOUT_CNT) + >= FETCH_SIZE) + break; + } else { + int3 = sii8620_readb(ctx, REG_INTR3); + } + if (time_is_before_jiffies(timeout)) { + ctx->error = -ETIMEDOUT; + dev_err(ctx->dev, "timeout during EDID read\n"); kfree(edid); edid = NULL; goto end; } - } while (1); - - sii8620_readb(ctx, REG_DDC_STATUS); - while (sii8620_readb(ctx, REG_DDC_DOUT_CNT) < FETCH_SIZE) usleep_range(10, 20); + } sii8620_read_buf(ctx, REG_DDC_DATA, edid + fetched, FETCH_SIZE); if (fetched + FETCH_SIZE == EDID_LENGTH) { @@ -971,8 +942,17 @@ static int sii8620_hw_on(struct sii8620 *ctx) ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies); if (ret) return ret; + usleep_range(10000, 20000); - return clk_prepare_enable(ctx->clk_xtal); + ret = clk_prepare_enable(ctx->clk_xtal); + if (ret) + return ret; + + msleep(100); + gpiod_set_value(ctx->gpio_reset, 0); + msleep(100); + + return 0; } static int sii8620_hw_off(struct sii8620 *ctx) @@ -982,17 +962,6 @@ static int sii8620_hw_off(struct sii8620 *ctx) return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies); } -static void sii8620_hw_reset(struct sii8620 *ctx) -{ - usleep_range(10000, 20000); - gpiod_set_value(ctx->gpio_reset, 0); - usleep_range(5000, 20000); - gpiod_set_value(ctx->gpio_reset, 1); - usleep_range(10000, 20000); - gpiod_set_value(ctx->gpio_reset, 0); - msleep(300); -} - static void sii8620_cbus_reset(struct sii8620 *ctx) { sii8620_write(ctx, REG_PWD_SRST, BIT_PWD_SRST_CBUS_RST @@ -1048,20 +1017,11 @@ static void sii8620_stop_video(struct sii8620 *ctx) static void sii8620_set_format(struct sii8620 *ctx) { - u8 out_fmt; - if (sii8620_is_mhl3(ctx)) { sii8620_setbits(ctx, REG_M3_P0CTRL, BIT_M3_P0CTRL_MHL3_P0_PIXEL_MODE_PACKED, ctx->use_packed_pixel ? ~0 : 0); } else { - if (ctx->use_packed_pixel) - sii8620_write_seq_static(ctx, - REG_VID_MODE, BIT_VID_MODE_M1080P, - REG_MHL_TOP_CTL, BIT_MHL_TOP_CTL_MHL_PP_SEL | 1, - REG_MHLTX_CTL6, 0x60 - ); - else sii8620_write_seq_static(ctx, REG_VID_MODE, 0, REG_MHL_TOP_CTL, 1, @@ -1069,15 +1029,9 @@ static void sii8620_set_format(struct sii8620 *ctx) ); } - if (ctx->use_packed_pixel) - out_fmt = VAL_TPI_FORMAT(YCBCR422, FULL) | - BIT_TPI_OUTPUT_CSCMODE709; - else - out_fmt = VAL_TPI_FORMAT(RGB, FULL); - sii8620_write_seq(ctx, REG_TPI_INPUT, VAL_TPI_FORMAT(RGB, FULL), - REG_TPI_OUTPUT, out_fmt, + REG_TPI_OUTPUT, VAL_TPI_FORMAT(RGB, FULL), ); } @@ -1216,7 +1170,7 @@ static void sii8620_start_video(struct sii8620 *ctx) int clk = ctx->pixel_clock * (ctx->use_packed_pixel ? 2 : 3); int i; - for (i = 0; i < ARRAY_SIZE(clk_spec); ++i) + for (i = 0; i < ARRAY_SIZE(clk_spec) - 1; ++i) if (clk < clk_spec[i].max_clk) break; @@ -1534,6 +1488,16 @@ static void sii8620_set_mode(struct sii8620 *ctx, enum sii8620_mode mode) ); } +static void sii8620_hpd_unplugged(struct sii8620 *ctx) +{ + sii8620_disable_hpd(ctx); + ctx->sink_type = SINK_NONE; + ctx->sink_detected = false; + ctx->feature_complete = false; + kfree(ctx->edid); + ctx->edid = NULL; +} + static void sii8620_disconnect(struct sii8620 *ctx) { sii8620_disable_gen2_write_burst(ctx); @@ -1561,7 +1525,7 @@ static void sii8620_disconnect(struct sii8620 *ctx) REG_MHL_DP_CTL6, 0x2A, REG_MHL_DP_CTL7, 0x03 ); - sii8620_disable_hpd(ctx); + sii8620_hpd_unplugged(ctx); sii8620_write_seq_static(ctx, REG_M3_CTRL, VAL_M3_CTRL_MHL3_VALUE, REG_MHL_COC_CTL1, 0x07, @@ -1609,10 +1573,8 @@ static void sii8620_disconnect(struct sii8620 *ctx) memset(ctx->xstat, 0, sizeof(ctx->xstat)); memset(ctx->devcap, 0, sizeof(ctx->devcap)); memset(ctx->xdevcap, 0, sizeof(ctx->xdevcap)); + ctx->devcap_read = false; ctx->cbus_status = 0; - ctx->sink_type = SINK_NONE; - kfree(ctx->edid); - ctx->edid = NULL; sii8620_mt_cleanup(ctx); } @@ -1703,9 +1665,6 @@ static void sii8620_status_changed_path(struct sii8620 *ctx) sii8620_mt_write_stat(ctx, MHL_DST_REG(LINK_MODE), MHL_DST_LM_CLK_MODE_NORMAL | MHL_DST_LM_PATH_ENABLED); - if (!sii8620_is_mhl3(ctx)) - sii8620_mt_read_devcap(ctx, false); - sii8620_mt_set_cont(ctx, sii8620_sink_detected); } else { sii8620_mt_write_stat(ctx, MHL_DST_REG(LINK_MODE), MHL_DST_LM_CLK_MODE_NORMAL); @@ -1722,9 +1681,14 @@ static void sii8620_msc_mr_write_stat(struct sii8620 *ctx) sii8620_update_array(ctx->stat, st, MHL_DST_SIZE); sii8620_update_array(ctx->xstat, xst, MHL_XDS_SIZE); - if (ctx->stat[MHL_DST_CONNECTED_RDY] & MHL_DST_CONN_DCAP_RDY) + if (ctx->stat[MHL_DST_CONNECTED_RDY] & st[MHL_DST_CONNECTED_RDY] & + MHL_DST_CONN_DCAP_RDY) { sii8620_status_dcap_ready(ctx); + if (!sii8620_is_mhl3(ctx)) + sii8620_mt_read_devcap(ctx, false); + } + if (st[MHL_DST_LINK_MODE] & MHL_DST_LM_PATH_ENABLED) sii8620_status_changed_path(ctx); } @@ -1808,8 +1772,11 @@ static void sii8620_msc_mr_set_int(struct sii8620 *ctx) } if (ints[MHL_INT_RCHANGE] & MHL_INT_RC_FEAT_REQ) sii8620_send_features(ctx); - if (ints[MHL_INT_RCHANGE] & MHL_INT_RC_FEAT_COMPLETE) - sii8620_edid_read(ctx, 0); + if (ints[MHL_INT_RCHANGE] & MHL_INT_RC_FEAT_COMPLETE) { + ctx->feature_complete = true; + if (ctx->edid) + sii8620_enable_hpd(ctx); + } } static struct sii8620_mt_msg *sii8620_msc_msg_first(struct sii8620 *ctx) @@ -1884,6 +1851,15 @@ static void sii8620_irq_msc(struct sii8620 *ctx) if (stat & BIT_CBUS_MSC_MR_WRITE_STAT) sii8620_msc_mr_write_stat(ctx); + if (stat & BIT_CBUS_HPD_CHG) { + if (ctx->cbus_status & BIT_CBUS_STATUS_CBUS_HPD) { + ctx->sink_detected = true; + sii8620_identify_sink(ctx); + } else { + sii8620_hpd_unplugged(ctx); + } + } + if (stat & BIT_CBUS_MSC_MR_SET_INT) sii8620_msc_mr_set_int(ctx); @@ -1931,14 +1907,6 @@ static void sii8620_irq_edid(struct sii8620 *ctx) ctx->mt_state = MT_STATE_DONE; } -static void sii8620_scdt_high(struct sii8620 *ctx) -{ - sii8620_write_seq_static(ctx, - REG_INTR8_MASK, BIT_CEA_NEW_AVI | BIT_CEA_NEW_VSI, - REG_TPI_SC, BIT_TPI_SC_TPI_OUTPUT_MODE_0_HDMI, - ); -} - static void sii8620_irq_scdt(struct sii8620 *ctx) { u8 stat = sii8620_readb(ctx, REG_INTR5); @@ -1946,53 +1914,13 @@ static void sii8620_irq_scdt(struct sii8620 *ctx) if (stat & BIT_INTR_SCDT_CHANGE) { u8 cstat = sii8620_readb(ctx, REG_TMDS_CSTAT_P3); - if (cstat & BIT_TMDS_CSTAT_P3_SCDT) { - if (ctx->sink_type == SINK_HDMI) - /* enable infoframe interrupt */ - sii8620_scdt_high(ctx); - else - sii8620_start_video(ctx); - } + if (cstat & BIT_TMDS_CSTAT_P3_SCDT) + sii8620_start_video(ctx); } sii8620_write(ctx, REG_INTR5, stat); } -static void sii8620_new_vsi(struct sii8620 *ctx) -{ - u8 vsif[11]; - - sii8620_write(ctx, REG_RX_HDMI_CTRL2, - VAL_RX_HDMI_CTRL2_DEFVAL | - BIT_RX_HDMI_CTRL2_VSI_MON_SEL_VSI); - sii8620_read_buf(ctx, REG_RX_HDMI_MON_PKT_HEADER1, vsif, - ARRAY_SIZE(vsif)); -} - -static void sii8620_new_avi(struct sii8620 *ctx) -{ - sii8620_write(ctx, REG_RX_HDMI_CTRL2, VAL_RX_HDMI_CTRL2_DEFVAL); - sii8620_read_buf(ctx, REG_RX_HDMI_MON_PKT_HEADER1, ctx->avif, - ARRAY_SIZE(ctx->avif)); -} - -static void sii8620_irq_infr(struct sii8620 *ctx) -{ - u8 stat = sii8620_readb(ctx, REG_INTR8) - & (BIT_CEA_NEW_VSI | BIT_CEA_NEW_AVI); - - sii8620_write(ctx, REG_INTR8, stat); - - if (stat & BIT_CEA_NEW_VSI) - sii8620_new_vsi(ctx); - - if (stat & BIT_CEA_NEW_AVI) - sii8620_new_avi(ctx); - - if (stat & (BIT_CEA_NEW_VSI | BIT_CEA_NEW_AVI)) - sii8620_start_video(ctx); -} - static void sii8620_got_xdevcap(struct sii8620 *ctx, int ret) { if (ret < 0) @@ -2043,11 +1971,11 @@ static void sii8620_irq_ddc(struct sii8620 *ctx) if (stat & BIT_DDC_CMD_DONE) { sii8620_write(ctx, REG_INTR3_MASK, 0); - if (sii8620_is_mhl3(ctx)) + if (sii8620_is_mhl3(ctx) && !ctx->feature_complete) sii8620_mt_set_int(ctx, MHL_INT_REG(RCHANGE), MHL_INT_RC_FEAT_REQ); else - sii8620_edid_read(ctx, 0); + sii8620_enable_hpd(ctx); } sii8620_write(ctx, REG_INTR3, stat); } @@ -2074,7 +2002,6 @@ static irqreturn_t sii8620_irq_thread(int irq, void *data) { BIT_FAST_INTR_STAT_EDID, sii8620_irq_edid }, { BIT_FAST_INTR_STAT_DDC, sii8620_irq_ddc }, { BIT_FAST_INTR_STAT_SCDT, sii8620_irq_scdt }, - { BIT_FAST_INTR_STAT_INFR, sii8620_irq_infr }, }; struct sii8620 *ctx = data; u8 stats[LEN_FAST_INTR_STAT]; @@ -2112,7 +2039,6 @@ static void sii8620_cable_in(struct sii8620 *ctx) dev_err(dev, "Error powering on, %d.\n", ret); return; } - sii8620_hw_reset(ctx); sii8620_read_buf(ctx, REG_VND_IDL, ver, ARRAY_SIZE(ver)); ret = sii8620_clear_error(ctx); @@ -2268,17 +2194,43 @@ static void sii8620_detach(struct drm_bridge *bridge) rc_unregister_device(ctx->rc_dev); } +static int sii8620_is_packing_required(struct sii8620 *ctx, + const struct drm_display_mode *mode) +{ + int max_pclk, max_pclk_pp_mode; + + if (sii8620_is_mhl3(ctx)) { + max_pclk = MHL3_MAX_PCLK; + max_pclk_pp_mode = MHL3_MAX_PCLK_PP_MODE; + } else { + max_pclk = MHL1_MAX_PCLK; + max_pclk_pp_mode = MHL1_MAX_PCLK_PP_MODE; + } + + if (mode->clock < max_pclk) + return 0; + else if (mode->clock < max_pclk_pp_mode) + return 1; + else + return -1; +} + static enum drm_mode_status sii8620_mode_valid(struct drm_bridge *bridge, const struct drm_display_mode *mode) { struct sii8620 *ctx = bridge_to_sii8620(bridge); + int pack_required = sii8620_is_packing_required(ctx, mode); bool can_pack = ctx->devcap[MHL_DCAP_VID_LINK_MODE] & MHL_DCAP_VID_LINK_PPIXEL; - unsigned int max_pclk = sii8620_is_mhl3(ctx) ? MHL3_MAX_LCLK : - MHL1_MAX_LCLK; - max_pclk /= can_pack ? 2 : 3; - return (mode->clock > max_pclk) ? MODE_CLOCK_HIGH : MODE_OK; + switch (pack_required) { + case 0: + return MODE_OK; + case 1: + return (can_pack) ? MODE_OK : MODE_CLOCK_HIGH; + default: + return MODE_CLOCK_HIGH; + } } static bool sii8620_mode_fixup(struct drm_bridge *bridge, @@ -2286,43 +2238,16 @@ static bool sii8620_mode_fixup(struct drm_bridge *bridge, struct drm_display_mode *adjusted_mode) { struct sii8620 *ctx = bridge_to_sii8620(bridge); - int max_lclk; - bool ret = true; mutex_lock(&ctx->lock); - max_lclk = sii8620_is_mhl3(ctx) ? MHL3_MAX_LCLK : MHL1_MAX_LCLK; - if (max_lclk > 3 * adjusted_mode->clock) { - ctx->use_packed_pixel = 0; - goto end; - } - if ((ctx->devcap[MHL_DCAP_VID_LINK_MODE] & MHL_DCAP_VID_LINK_PPIXEL) && - max_lclk > 2 * adjusted_mode->clock) { - ctx->use_packed_pixel = 1; - goto end; - } - ret = false; -end: - if (ret) { - u8 vic = drm_match_cea_mode(adjusted_mode); - - if (!vic) { - union hdmi_infoframe frm; - u8 mhl_vic[] = { 0, 95, 94, 93, 98 }; - - /* FIXME: We need the connector here */ - drm_hdmi_vendor_infoframe_from_display_mode( - &frm.vendor.hdmi, NULL, adjusted_mode); - vic = frm.vendor.hdmi.vic; - if (vic >= ARRAY_SIZE(mhl_vic)) - vic = 0; - vic = mhl_vic[vic]; - } - ctx->video_code = vic; - ctx->pixel_clock = adjusted_mode->clock; - } + ctx->use_packed_pixel = sii8620_is_packing_required(ctx, adjusted_mode); + ctx->video_code = drm_match_cea_mode(adjusted_mode); + ctx->pixel_clock = adjusted_mode->clock; + mutex_unlock(&ctx->lock); - return ret; + + return true; } static const struct drm_bridge_funcs sii8620_bridge_funcs = { diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index b553a6f2ff0e..7af748ed1c58 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -369,13 +369,6 @@ EXPORT_SYMBOL(drm_dev_exit); */ void drm_dev_unplug(struct drm_device *dev) { - drm_dev_unregister(dev); - - mutex_lock(&drm_global_mutex); - if (dev->open_count == 0) - drm_dev_put(dev); - mutex_unlock(&drm_global_mutex); - /* * After synchronizing any critical read section is guaranteed to see * the new value of ->unplugged, and any critical section which might @@ -384,6 +377,13 @@ void drm_dev_unplug(struct drm_device *dev) */ dev->unplugged = true; synchronize_srcu(&drm_unplug_srcu); + + drm_dev_unregister(dev); + + mutex_lock(&drm_global_mutex); + if (dev->open_count == 0) + drm_dev_put(dev); + mutex_unlock(&drm_global_mutex); } EXPORT_SYMBOL(drm_dev_unplug); diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 34c125e2d90c..52f3b91d14fd 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -340,14 +340,21 @@ struct drm_i915_file_private { unsigned int bsd_engine; -/* Client can have a maximum of 3 contexts banned before - * it is denied of creating new contexts. As one context - * ban needs 4 consecutive hangs, and more if there is - * progress in between, this is a last resort stop gap measure - * to limit the badly behaving clients access to gpu. +/* + * Every context ban increments per client ban score. Also + * hangs in short succession increments ban score. If ban threshold + * is reached, client is considered banned and submitting more work + * will fail. This is a stop gap measure to limit the badly behaving + * clients access to gpu. Note that unbannable contexts never increment + * the client ban score. */ -#define I915_MAX_CLIENT_CONTEXT_BANS 3 - atomic_t context_bans; +#define I915_CLIENT_SCORE_HANG_FAST 1 +#define I915_CLIENT_FAST_HANG_JIFFIES (60 * HZ) +#define I915_CLIENT_SCORE_CONTEXT_BAN 3 +#define I915_CLIENT_SCORE_BANNED 9 + /** ban_score: Accumulated score of all ctx bans and fast hangs. */ + atomic_t ban_score; + unsigned long hang_timestamp; }; /* Interface history: @@ -2238,9 +2245,6 @@ static inline struct scatterlist *____sg_next(struct scatterlist *sg) **/ static inline struct scatterlist *__sg_next(struct scatterlist *sg) { -#ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); -#endif return sg_is_last(sg) ? NULL : ____sg_next(sg); } diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 3704f4c0c2c9..d44ad7bc1e94 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2933,32 +2933,54 @@ i915_gem_object_pwrite_gtt(struct drm_i915_gem_object *obj, return 0; } +static void i915_gem_client_mark_guilty(struct drm_i915_file_private *file_priv, + const struct i915_gem_context *ctx) +{ + unsigned int score; + unsigned long prev_hang; + + if (i915_gem_context_is_banned(ctx)) + score = I915_CLIENT_SCORE_CONTEXT_BAN; + else + score = 0; + + prev_hang = xchg(&file_priv->hang_timestamp, jiffies); + if (time_before(jiffies, prev_hang + I915_CLIENT_FAST_HANG_JIFFIES)) + score += I915_CLIENT_SCORE_HANG_FAST; + + if (score) { + atomic_add(score, &file_priv->ban_score); + + DRM_DEBUG_DRIVER("client %s: gained %u ban score, now %u\n", + ctx->name, score, + atomic_read(&file_priv->ban_score)); + } +} + static void i915_gem_context_mark_guilty(struct i915_gem_context *ctx) { - bool banned; + unsigned int score; + bool banned, bannable; atomic_inc(&ctx->guilty_count); - banned = false; - if (i915_gem_context_is_bannable(ctx)) { - unsigned int score; + bannable = i915_gem_context_is_bannable(ctx); + score = atomic_add_return(CONTEXT_SCORE_GUILTY, &ctx->ban_score); + banned = score >= CONTEXT_SCORE_BAN_THRESHOLD; - score = atomic_add_return(CONTEXT_SCORE_GUILTY, - &ctx->ban_score); - banned = score >= CONTEXT_SCORE_BAN_THRESHOLD; + DRM_DEBUG_DRIVER("context %s: guilty %d, score %u, ban %s\n", + ctx->name, atomic_read(&ctx->guilty_count), + score, yesno(banned && bannable)); - DRM_DEBUG_DRIVER("context %s marked guilty (score %d) banned? %s\n", - ctx->name, score, yesno(banned)); - } - if (!banned) + /* Cool contexts don't accumulate client ban score */ + if (!bannable) return; - i915_gem_context_set_banned(ctx); - if (!IS_ERR_OR_NULL(ctx->file_priv)) { - atomic_inc(&ctx->file_priv->context_bans); - DRM_DEBUG_DRIVER("client %s has had %d context banned\n", - ctx->name, atomic_read(&ctx->file_priv->context_bans)); - } + if (banned) + i915_gem_context_set_banned(ctx); + + if (!IS_ERR_OR_NULL(ctx->file_priv)) + i915_gem_client_mark_guilty(ctx->file_priv, ctx); } static void i915_gem_context_mark_innocent(struct i915_gem_context *ctx) @@ -5736,6 +5758,7 @@ int i915_gem_open(struct drm_i915_private *i915, struct drm_file *file) INIT_LIST_HEAD(&file_priv->mm.request_list); file_priv->bsd_engine = -1; + file_priv->hang_timestamp = jiffies; ret = i915_gem_context_open(i915, file); if (ret) diff --git a/drivers/gpu/drm/i915/i915_gem_context.c b/drivers/gpu/drm/i915/i915_gem_context.c index 33f8a4b3c981..060335d3d9e0 100644 --- a/drivers/gpu/drm/i915/i915_gem_context.c +++ b/drivers/gpu/drm/i915/i915_gem_context.c @@ -652,7 +652,7 @@ int i915_gem_switch_to_kernel_context(struct drm_i915_private *dev_priv) static bool client_is_banned(struct drm_i915_file_private *file_priv) { - return atomic_read(&file_priv->context_bans) > I915_MAX_CLIENT_CONTEXT_BANS; + return atomic_read(&file_priv->ban_score) >= I915_CLIENT_SCORE_BANNED; } int i915_gem_context_create_ioctl(struct drm_device *dev, void *data, diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index f627a8c47c58..22df17c8ca9b 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -489,7 +489,9 @@ eb_validate_vma(struct i915_execbuffer *eb, } static int -eb_add_vma(struct i915_execbuffer *eb, unsigned int i, struct i915_vma *vma) +eb_add_vma(struct i915_execbuffer *eb, + unsigned int i, unsigned batch_idx, + struct i915_vma *vma) { struct drm_i915_gem_exec_object2 *entry = &eb->exec[i]; int err; @@ -522,6 +524,24 @@ eb_add_vma(struct i915_execbuffer *eb, unsigned int i, struct i915_vma *vma) eb->flags[i] = entry->flags; vma->exec_flags = &eb->flags[i]; + /* + * SNA is doing fancy tricks with compressing batch buffers, which leads + * to negative relocation deltas. Usually that works out ok since the + * relocate address is still positive, except when the batch is placed + * very low in the GTT. Ensure this doesn't happen. + * + * Note that actual hangs have only been observed on gen7, but for + * paranoia do it everywhere. + */ + if (i == batch_idx) { + if (!(eb->flags[i] & EXEC_OBJECT_PINNED)) + eb->flags[i] |= __EXEC_OBJECT_NEEDS_BIAS; + if (eb->reloc_cache.has_fence) + eb->flags[i] |= EXEC_OBJECT_NEEDS_FENCE; + + eb->batch = vma; + } + err = 0; if (eb_pin_vma(eb, entry, vma)) { if (entry->offset != vma->node.start) { @@ -716,7 +736,7 @@ static int eb_lookup_vmas(struct i915_execbuffer *eb) { struct radix_tree_root *handles_vma = &eb->ctx->handles_vma; struct drm_i915_gem_object *obj; - unsigned int i; + unsigned int i, batch; int err; if (unlikely(i915_gem_context_is_closed(eb->ctx))) @@ -728,6 +748,8 @@ static int eb_lookup_vmas(struct i915_execbuffer *eb) INIT_LIST_HEAD(&eb->relocs); INIT_LIST_HEAD(&eb->unbound); + batch = eb_batch_index(eb); + for (i = 0; i < eb->buffer_count; i++) { u32 handle = eb->exec[i].handle; struct i915_lut_handle *lut; @@ -770,33 +792,16 @@ static int eb_lookup_vmas(struct i915_execbuffer *eb) lut->handle = handle; add_vma: - err = eb_add_vma(eb, i, vma); + err = eb_add_vma(eb, i, batch, vma); if (unlikely(err)) goto err_vma; GEM_BUG_ON(vma != eb->vma[i]); GEM_BUG_ON(vma->exec_flags != &eb->flags[i]); + GEM_BUG_ON(drm_mm_node_allocated(&vma->node) && + eb_vma_misplaced(&eb->exec[i], vma, eb->flags[i])); } - /* take note of the batch buffer before we might reorder the lists */ - i = eb_batch_index(eb); - eb->batch = eb->vma[i]; - GEM_BUG_ON(eb->batch->exec_flags != &eb->flags[i]); - - /* - * SNA is doing fancy tricks with compressing batch buffers, which leads - * to negative relocation deltas. Usually that works out ok since the - * relocate address is still positive, except when the batch is placed - * very low in the GTT. Ensure this doesn't happen. - * - * Note that actual hangs have only been observed on gen7, but for - * paranoia do it everywhere. - */ - if (!(eb->flags[i] & EXEC_OBJECT_PINNED)) - eb->flags[i] |= __EXEC_OBJECT_NEEDS_BIAS; - if (eb->reloc_cache.has_fence) - eb->flags[i] |= EXEC_OBJECT_NEEDS_FENCE; - eb->args->flags |= __EXEC_VALIDATED; return eb_reserve(eb); diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index f9bc3aaa90d0..4a02747ac658 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -1893,9 +1893,17 @@ static void i9xx_pipestat_irq_ack(struct drm_i915_private *dev_priv, /* * Clear the PIPE*STAT regs before the IIR + * + * Toggle the enable bits to make sure we get an + * edge in the ISR pipe event bit if we don't clear + * all the enabled status bits. Otherwise the edge + * triggered IIR on i965/g4x wouldn't notice that + * an interrupt is still pending. */ - if (pipe_stats[pipe]) - I915_WRITE(reg, enable_mask | pipe_stats[pipe]); + if (pipe_stats[pipe]) { + I915_WRITE(reg, pipe_stats[pipe]); + I915_WRITE(reg, enable_mask); + } } spin_unlock(&dev_priv->irq_lock); } diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index f11bb213ec07..7720569f2024 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -2425,12 +2425,17 @@ enum i915_power_well_id { #define _3D_CHICKEN _MMIO(0x2084) #define _3D_CHICKEN_HIZ_PLANE_DISABLE_MSAA_4X_SNB (1 << 10) #define _3D_CHICKEN2 _MMIO(0x208c) + +#define FF_SLICE_CHICKEN _MMIO(0x2088) +#define FF_SLICE_CHICKEN_CL_PROVOKING_VERTEX_FIX (1 << 1) + /* Disables pipelining of read flushes past the SF-WIZ interface. * Required on all Ironlake steppings according to the B-Spec, but the * particular danger of not doing so is not specified. */ # define _3D_CHICKEN2_WM_READ_PIPELINED (1 << 14) #define _3D_CHICKEN3 _MMIO(0x2090) +#define _3D_CHICKEN_SF_PROVOKING_VERTEX_FIX (1 << 12) #define _3D_CHICKEN_SF_DISABLE_OBJEND_CULL (1 << 10) #define _3D_CHICKEN3_AA_LINE_QUALITY_FIX_ENABLE (1 << 5) #define _3D_CHICKEN3_SF_DISABLE_FASTCLIP_CULL (1 << 5) diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index de0e22322c76..072b326d5ee0 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -304,6 +304,9 @@ intel_crt_mode_valid(struct drm_connector *connector, int max_dotclk = dev_priv->max_dotclk_freq; int max_clock; + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) + return MODE_NO_DBLESCAN; + if (mode->clock < 25000) return MODE_CLOCK_LOW; @@ -337,6 +340,12 @@ static bool intel_crt_compute_config(struct intel_encoder *encoder, struct intel_crtc_state *pipe_config, struct drm_connector_state *conn_state) { + struct drm_display_mode *adjusted_mode = + &pipe_config->base.adjusted_mode; + + if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) + return false; + return true; } @@ -344,6 +353,12 @@ static bool pch_crt_compute_config(struct intel_encoder *encoder, struct intel_crtc_state *pipe_config, struct drm_connector_state *conn_state) { + struct drm_display_mode *adjusted_mode = + &pipe_config->base.adjusted_mode; + + if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) + return false; + pipe_config->has_pch_encoder = true; return true; @@ -354,6 +369,11 @@ static bool hsw_crt_compute_config(struct intel_encoder *encoder, struct drm_connector_state *conn_state) { struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct drm_display_mode *adjusted_mode = + &pipe_config->base.adjusted_mode; + + if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) + return false; pipe_config->has_pch_encoder = true; diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index dee3a8e659f1..2cc6faa1daa8 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -14469,12 +14469,22 @@ static enum drm_mode_status intel_mode_valid(struct drm_device *dev, const struct drm_display_mode *mode) { + /* + * Can't reject DBLSCAN here because Xorg ddxen can add piles + * of DBLSCAN modes to the output's mode list when they detect + * the scaling mode property on the connector. And they don't + * ask the kernel to validate those modes in any way until + * modeset time at which point the client gets a protocol error. + * So in order to not upset those clients we silently ignore the + * DBLSCAN flag on such connectors. For other connectors we will + * reject modes with the DBLSCAN flag in encoder->compute_config(). + * And we always reject DBLSCAN modes in connector->mode_valid() + * as we never want such modes on the connector's mode list. + */ + if (mode->vscan > 1) return MODE_NO_VSCAN; - if (mode->flags & DRM_MODE_FLAG_DBLSCAN) - return MODE_NO_DBLESCAN; - if (mode->flags & DRM_MODE_FLAG_HSKEW) return MODE_H_ILLEGAL; diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 8320f0e8e3be..16faea30114a 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -420,6 +420,9 @@ intel_dp_mode_valid(struct drm_connector *connector, int max_rate, mode_rate, max_lanes, max_link_clock; int max_dotclk; + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) + return MODE_NO_DBLESCAN; + max_dotclk = intel_dp_downstream_max_dotclock(intel_dp); if (intel_dp_is_edp(intel_dp) && fixed_mode) { @@ -1862,7 +1865,10 @@ intel_dp_compute_config(struct intel_encoder *encoder, conn_state->scaling_mode); } - if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) && + if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) + return false; + + if (HAS_GMCH_DISPLAY(dev_priv) && adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) return false; @@ -2784,16 +2790,6 @@ static void g4x_disable_dp(struct intel_encoder *encoder, const struct drm_connector_state *old_conn_state) { intel_disable_dp(encoder, old_crtc_state, old_conn_state); - - /* disable the port before the pipe on g4x */ - intel_dp_link_down(encoder, old_crtc_state); -} - -static void ilk_disable_dp(struct intel_encoder *encoder, - const struct intel_crtc_state *old_crtc_state, - const struct drm_connector_state *old_conn_state) -{ - intel_disable_dp(encoder, old_crtc_state, old_conn_state); } static void vlv_disable_dp(struct intel_encoder *encoder, @@ -2807,13 +2803,19 @@ static void vlv_disable_dp(struct intel_encoder *encoder, intel_disable_dp(encoder, old_crtc_state, old_conn_state); } -static void ilk_post_disable_dp(struct intel_encoder *encoder, +static void g4x_post_disable_dp(struct intel_encoder *encoder, const struct intel_crtc_state *old_crtc_state, const struct drm_connector_state *old_conn_state) { struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); enum port port = encoder->port; + /* + * Bspec does not list a specific disable sequence for g4x DP. + * Follow the ilk+ sequence (disable pipe before the port) for + * g4x DP as it does not suffer from underruns like the normal + * g4x modeset sequence (disable pipe after the port). + */ intel_dp_link_down(encoder, old_crtc_state); /* Only ilk+ has port A */ @@ -6337,7 +6339,7 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port, drm_connector_init(dev, connector, &intel_dp_connector_funcs, type); drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs); - if (!IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv)) + if (!HAS_GMCH_DISPLAY(dev_priv)) connector->interlace_allowed = true; connector->doublescan_allowed = 0; @@ -6436,15 +6438,11 @@ bool intel_dp_init(struct drm_i915_private *dev_priv, intel_encoder->enable = vlv_enable_dp; intel_encoder->disable = vlv_disable_dp; intel_encoder->post_disable = vlv_post_disable_dp; - } else if (INTEL_GEN(dev_priv) >= 5) { - intel_encoder->pre_enable = g4x_pre_enable_dp; - intel_encoder->enable = g4x_enable_dp; - intel_encoder->disable = ilk_disable_dp; - intel_encoder->post_disable = ilk_post_disable_dp; } else { intel_encoder->pre_enable = g4x_pre_enable_dp; intel_encoder->enable = g4x_enable_dp; intel_encoder->disable = g4x_disable_dp; + intel_encoder->post_disable = g4x_post_disable_dp; } intel_dig_port->dp.output_reg = output_reg; diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c b/drivers/gpu/drm/i915/intel_dp_mst.c index 9e6956c08688..5890500a3a8b 100644 --- a/drivers/gpu/drm/i915/intel_dp_mst.c +++ b/drivers/gpu/drm/i915/intel_dp_mst.c @@ -48,6 +48,9 @@ static bool intel_dp_mst_compute_config(struct intel_encoder *encoder, bool reduce_m_n = drm_dp_has_quirk(&intel_dp->desc, DP_DPCD_QUIRK_LIMITED_M_N); + if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) + return false; + pipe_config->has_pch_encoder = false; bpp = 24; if (intel_dp->compliance.test_data.bpc) { @@ -366,6 +369,9 @@ intel_dp_mst_mode_valid(struct drm_connector *connector, if (!intel_dp) return MODE_ERROR; + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) + return MODE_NO_DBLESCAN; + max_link_clock = intel_dp_max_link_rate(intel_dp); max_lanes = intel_dp_max_lane_count(intel_dp); diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c index cf39ca90d887..f349b3920199 100644 --- a/drivers/gpu/drm/i915/intel_dsi.c +++ b/drivers/gpu/drm/i915/intel_dsi.c @@ -326,6 +326,9 @@ static bool intel_dsi_compute_config(struct intel_encoder *encoder, conn_state->scaling_mode); } + if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) + return false; + /* DSI uses short packets for sync events, so clear mode flags for DSI */ adjusted_mode->flags = 0; @@ -1266,6 +1269,9 @@ intel_dsi_mode_valid(struct drm_connector *connector, DRM_DEBUG_KMS("\n"); + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) + return MODE_NO_DBLESCAN; + if (fixed_mode) { if (mode->hdisplay > fixed_mode->hdisplay) return MODE_PANEL; diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c index a70d767313aa..61d908e0df0e 100644 --- a/drivers/gpu/drm/i915/intel_dvo.c +++ b/drivers/gpu/drm/i915/intel_dvo.c @@ -219,6 +219,9 @@ intel_dvo_mode_valid(struct drm_connector *connector, int max_dotclk = to_i915(connector->dev)->max_dotclk_freq; int target_clock = mode->clock; + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) + return MODE_NO_DBLESCAN; + /* XXX: Validate clock range */ if (fixed_mode) { @@ -254,6 +257,9 @@ static bool intel_dvo_compute_config(struct intel_encoder *encoder, if (fixed_mode) intel_fixed_panel_mode(fixed_mode, adjusted_mode); + if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) + return false; + return true; } diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index ee929f31f7db..d8cb53ef4351 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -1557,6 +1557,9 @@ intel_hdmi_mode_valid(struct drm_connector *connector, bool force_dvi = READ_ONCE(to_intel_digital_connector_state(connector->state)->force_audio) == HDMI_AUDIO_OFF_DVI; + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) + return MODE_NO_DBLESCAN; + clock = mode->clock; if ((mode->flags & DRM_MODE_FLAG_3D_MASK) == DRM_MODE_FLAG_3D_FRAME_PACKING) @@ -1677,6 +1680,9 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder, int desired_bpp; bool force_dvi = intel_conn_state->force_audio == HDMI_AUDIO_OFF_DVI; + if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) + return false; + pipe_config->has_hdmi_sink = !force_dvi && intel_hdmi->has_hdmi_sink; if (pipe_config->has_hdmi_sink) diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c index 15434cad5430..7c4c8fb1dae4 100644 --- a/drivers/gpu/drm/i915/intel_lrc.c +++ b/drivers/gpu/drm/i915/intel_lrc.c @@ -1545,11 +1545,21 @@ static u32 *gen9_init_indirectctx_bb(struct intel_engine_cs *engine, u32 *batch) /* WaFlushCoherentL3CacheLinesAtContextSwitch:skl,bxt,glk */ batch = gen8_emit_flush_coherentl3_wa(engine, batch); + *batch++ = MI_LOAD_REGISTER_IMM(3); + /* WaDisableGatherAtSetShaderCommonSlice:skl,bxt,kbl,glk */ - *batch++ = MI_LOAD_REGISTER_IMM(1); *batch++ = i915_mmio_reg_offset(COMMON_SLICE_CHICKEN2); *batch++ = _MASKED_BIT_DISABLE( GEN9_DISABLE_GATHER_AT_SET_SHADER_COMMON_SLICE); + + /* BSpec: 11391 */ + *batch++ = i915_mmio_reg_offset(FF_SLICE_CHICKEN); + *batch++ = _MASKED_BIT_ENABLE(FF_SLICE_CHICKEN_CL_PROVOKING_VERTEX_FIX); + + /* BSpec: 11299 */ + *batch++ = i915_mmio_reg_offset(_3D_CHICKEN3); + *batch++ = _MASKED_BIT_ENABLE(_3D_CHICKEN_SF_PROVOKING_VERTEX_FIX); + *batch++ = MI_NOOP; /* WaClearSlmSpaceAtContextSwitch:kbl */ @@ -2641,10 +2651,8 @@ static int execlists_context_deferred_alloc(struct i915_gem_context *ctx, context_size += LRC_HEADER_PAGES * PAGE_SIZE; ctx_obj = i915_gem_object_create(ctx->i915, context_size); - if (IS_ERR(ctx_obj)) { - ret = PTR_ERR(ctx_obj); - goto error_deref_obj; - } + if (IS_ERR(ctx_obj)) + return PTR_ERR(ctx_obj); vma = i915_vma_instance(ctx_obj, &ctx->i915->ggtt.base, NULL); if (IS_ERR(vma)) { diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index d278f24ba6ae..48f618dc9abb 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -380,6 +380,8 @@ intel_lvds_mode_valid(struct drm_connector *connector, struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode; int max_pixclk = to_i915(connector->dev)->max_dotclk_freq; + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) + return MODE_NO_DBLESCAN; if (mode->hdisplay > fixed_mode->hdisplay) return MODE_PANEL; if (mode->vdisplay > fixed_mode->vdisplay) @@ -429,6 +431,9 @@ static bool intel_lvds_compute_config(struct intel_encoder *intel_encoder, intel_fixed_panel_mode(intel_connector->panel.fixed_mode, adjusted_mode); + if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) + return false; + if (HAS_PCH_SPLIT(dev_priv)) { pipe_config->has_pch_encoder = true; diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 25005023c243..26975df4e593 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -1160,6 +1160,9 @@ static bool intel_sdvo_compute_config(struct intel_encoder *encoder, adjusted_mode); } + if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) + return false; + /* * Make the CRTC code factor in the SDVO pixel multiplier. The * SDVO device will factor out the multiplier during mode_set. @@ -1621,6 +1624,9 @@ intel_sdvo_mode_valid(struct drm_connector *connector, struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector); int max_dotclk = to_i915(connector->dev)->max_dotclk_freq; + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) + return MODE_NO_DBLESCAN; + if (intel_sdvo->pixel_clock_min > mode->clock) return MODE_CLOCK_LOW; diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c index 885fc3809f7f..b55b5c157e38 100644 --- a/drivers/gpu/drm/i915/intel_tv.c +++ b/drivers/gpu/drm/i915/intel_tv.c @@ -850,6 +850,9 @@ intel_tv_mode_valid(struct drm_connector *connector, const struct tv_mode *tv_mode = intel_tv_mode_find(connector->state); int max_dotclk = to_i915(connector->dev)->max_dotclk_freq; + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) + return MODE_NO_DBLESCAN; + if (mode->clock > max_dotclk) return MODE_CLOCK_HIGH; @@ -877,16 +880,21 @@ intel_tv_compute_config(struct intel_encoder *encoder, struct drm_connector_state *conn_state) { const struct tv_mode *tv_mode = intel_tv_mode_find(conn_state); + struct drm_display_mode *adjusted_mode = + &pipe_config->base.adjusted_mode; if (!tv_mode) return false; - pipe_config->base.adjusted_mode.crtc_clock = tv_mode->clock; + if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) + return false; + + adjusted_mode->crtc_clock = tv_mode->clock; DRM_DEBUG_KMS("forcing bpc to 8 for TV\n"); pipe_config->pipe_bpp = 8*3; /* TV has it's own notion of sync and other mode flags, so clear them. */ - pipe_config->base.adjusted_mode.flags = 0; + adjusted_mode->flags = 0; /* * FIXME: We don't check whether the input mode is actually what we want diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c index 32b1a6cdecfc..d3443125e661 100644 --- a/drivers/gpu/drm/meson/meson_drv.c +++ b/drivers/gpu/drm/meson/meson_drv.c @@ -197,8 +197,10 @@ static int meson_drv_bind_master(struct device *dev, bool has_components) priv->io_base = regs; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hhi"); - if (!res) - return -EINVAL; + if (!res) { + ret = -EINVAL; + goto free_drm; + } /* Simply ioremap since it may be a shared register zone */ regs = devm_ioremap(dev, res->start, resource_size(res)); if (!regs) { @@ -215,8 +217,10 @@ static int meson_drv_bind_master(struct device *dev, bool has_components) } res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dmc"); - if (!res) - return -EINVAL; + if (!res) { + ret = -EINVAL; + goto free_drm; + } /* Simply ioremap since it may be a shared register zone */ regs = devm_ioremap(dev, res->start, resource_size(res)); if (!regs) { diff --git a/drivers/gpu/drm/nouveau/dispnv50/curs507a.c b/drivers/gpu/drm/nouveau/dispnv50/curs507a.c index 291c08117ab6..397143b639c6 100644 --- a/drivers/gpu/drm/nouveau/dispnv50/curs507a.c +++ b/drivers/gpu/drm/nouveau/dispnv50/curs507a.c @@ -132,7 +132,7 @@ curs507a_new_(const struct nv50_wimm_func *func, struct nouveau_drm *drm, nvif_object_map(&wndw->wimm.base.user, NULL, 0); wndw->immd = func; - wndw->ctxdma.parent = &disp->core->chan.base.user; + wndw->ctxdma.parent = NULL; return 0; } diff --git a/drivers/gpu/drm/nouveau/dispnv50/wndw.c b/drivers/gpu/drm/nouveau/dispnv50/wndw.c index 224963b533a6..c5a9bc1af5af 100644 --- a/drivers/gpu/drm/nouveau/dispnv50/wndw.c +++ b/drivers/gpu/drm/nouveau/dispnv50/wndw.c @@ -444,14 +444,17 @@ nv50_wndw_prepare_fb(struct drm_plane *plane, struct drm_plane_state *state) if (ret) return ret; - ctxdma = nv50_wndw_ctxdma_new(wndw, fb); - if (IS_ERR(ctxdma)) { - nouveau_bo_unpin(fb->nvbo); - return PTR_ERR(ctxdma); + if (wndw->ctxdma.parent) { + ctxdma = nv50_wndw_ctxdma_new(wndw, fb); + if (IS_ERR(ctxdma)) { + nouveau_bo_unpin(fb->nvbo); + return PTR_ERR(ctxdma); + } + + asyw->image.handle[0] = ctxdma->object.handle; } asyw->state.fence = reservation_object_get_excl_rcu(fb->nvbo->bo.resv); - asyw->image.handle[0] = ctxdma->object.handle; asyw->image.offset[0] = fb->nvbo->bo.offset; if (wndw->func->prepare) { diff --git a/drivers/gpu/drm/qxl/qxl_display.c b/drivers/gpu/drm/qxl/qxl_display.c index b8cda9449241..768207fbbae3 100644 --- a/drivers/gpu/drm/qxl/qxl_display.c +++ b/drivers/gpu/drm/qxl/qxl_display.c @@ -623,7 +623,7 @@ static void qxl_cursor_atomic_update(struct drm_plane *plane, struct qxl_cursor_cmd *cmd; struct qxl_cursor *cursor; struct drm_gem_object *obj; - struct qxl_bo *cursor_bo = NULL, *user_bo = NULL; + struct qxl_bo *cursor_bo = NULL, *user_bo = NULL, *old_cursor_bo = NULL; int ret; void *user_ptr; int size = 64*64*4; @@ -677,7 +677,7 @@ static void qxl_cursor_atomic_update(struct drm_plane *plane, cursor_bo, 0); cmd->type = QXL_CURSOR_SET; - qxl_bo_unref(&qcrtc->cursor_bo); + old_cursor_bo = qcrtc->cursor_bo; qcrtc->cursor_bo = cursor_bo; cursor_bo = NULL; } else { @@ -697,6 +697,9 @@ static void qxl_cursor_atomic_update(struct drm_plane *plane, qxl_push_cursor_ring_release(qdev, release, QXL_CMD_CURSOR, false); qxl_release_fence_buffer_objects(release); + if (old_cursor_bo) + qxl_bo_unref(&old_cursor_bo); + qxl_bo_unref(&cursor_bo); return; diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index 08747fc3ee71..8232b39e16ca 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -17,7 +17,6 @@ #include <drm/drm_encoder.h> #include <drm/drm_modes.h> #include <drm/drm_of.h> -#include <drm/drm_panel.h> #include <uapi/drm/drm_mode.h> @@ -418,9 +417,6 @@ static void sun4i_tcon0_mode_set_lvds(struct sun4i_tcon *tcon, static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon, const struct drm_display_mode *mode) { - struct drm_panel *panel = tcon->panel; - struct drm_connector *connector = panel->connector; - struct drm_display_info display_info = connector->display_info; unsigned int bp, hsync, vsync; u8 clk_delay; u32 val = 0; @@ -478,27 +474,6 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon, if (mode->flags & DRM_MODE_FLAG_PVSYNC) val |= SUN4I_TCON0_IO_POL_VSYNC_POSITIVE; - /* - * On A20 and similar SoCs, the only way to achieve Positive Edge - * (Rising Edge), is setting dclk clock phase to 2/3(240°). - * By default TCON works in Negative Edge(Falling Edge), - * this is why phase is set to 0 in that case. - * Unfortunately there's no way to logically invert dclk through - * IO_POL register. - * The only acceptable way to work, triple checked with scope, - * is using clock phase set to 0° for Negative Edge and set to 240° - * for Positive Edge. - * On A33 and similar SoCs there would be a 90° phase option, - * but it divides also dclk by 2. - * Following code is a way to avoid quirks all around TCON - * and DOTCLOCK drivers. - */ - if (display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_POSEDGE) - clk_set_phase(tcon->dclk, 240); - - if (display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_NEGEDGE) - clk_set_phase(tcon->dclk, 0); - regmap_update_bits(tcon->regs, SUN4I_TCON0_IO_POL_REG, SUN4I_TCON0_IO_POL_HSYNC_POSITIVE | SUN4I_TCON0_IO_POL_VSYNC_POSITIVE, val); diff --git a/drivers/hid/hid-google-hammer.c b/drivers/hid/hid-google-hammer.c index 7b8e17b03cb8..6bf4da7ad63a 100644 --- a/drivers/hid/hid-google-hammer.c +++ b/drivers/hid/hid-google-hammer.c @@ -124,6 +124,8 @@ static const struct hid_device_id hammer_devices[] = { USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_STAFF) }, { HID_DEVICE(BUS_USB, HID_GROUP_GENERIC, USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_WAND) }, + { HID_DEVICE(BUS_USB, HID_GROUP_GENERIC, + USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_WHISKERS) }, { } }; MODULE_DEVICE_TABLE(hid, hammer_devices); diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index a85634fe033f..c7981ddd8776 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -452,6 +452,7 @@ #define USB_DEVICE_ID_GOOGLE_TOUCH_ROSE 0x5028 #define USB_DEVICE_ID_GOOGLE_STAFF 0x502b #define USB_DEVICE_ID_GOOGLE_WAND 0x502d +#define USB_DEVICE_ID_GOOGLE_WHISKERS 0x5030 #define USB_VENDOR_ID_GOTOP 0x08f2 #define USB_DEVICE_ID_SUPER_Q2 0x007f diff --git a/drivers/hid/hid-steam.c b/drivers/hid/hid-steam.c index cb86cc834201..0422ec2b13d2 100644 --- a/drivers/hid/hid-steam.c +++ b/drivers/hid/hid-steam.c @@ -573,7 +573,7 @@ static bool steam_is_valve_interface(struct hid_device *hdev) static int steam_client_ll_parse(struct hid_device *hdev) { - struct steam_device *steam = hid_get_drvdata(hdev); + struct steam_device *steam = hdev->driver_data; return hid_parse_report(hdev, steam->hdev->dev_rdesc, steam->hdev->dev_rsize); @@ -590,7 +590,7 @@ static void steam_client_ll_stop(struct hid_device *hdev) static int steam_client_ll_open(struct hid_device *hdev) { - struct steam_device *steam = hid_get_drvdata(hdev); + struct steam_device *steam = hdev->driver_data; int ret; ret = hid_hw_open(steam->hdev); @@ -605,7 +605,7 @@ static int steam_client_ll_open(struct hid_device *hdev) static void steam_client_ll_close(struct hid_device *hdev) { - struct steam_device *steam = hid_get_drvdata(hdev); + struct steam_device *steam = hdev->driver_data; mutex_lock(&steam->mutex); steam->client_opened = false; @@ -623,7 +623,7 @@ static int steam_client_ll_raw_request(struct hid_device *hdev, size_t count, unsigned char report_type, int reqtype) { - struct steam_device *steam = hid_get_drvdata(hdev); + struct steam_device *steam = hdev->driver_data; return hid_hw_raw_request(steam->hdev, reportnum, buf, count, report_type, reqtype); @@ -710,7 +710,7 @@ static int steam_probe(struct hid_device *hdev, ret = PTR_ERR(steam->client_hdev); goto client_hdev_fail; } - hid_set_drvdata(steam->client_hdev, steam); + steam->client_hdev->driver_data = steam; /* * With the real steam controller interface, do not connect hidraw. diff --git a/drivers/hid/intel-ish-hid/ipc/pci-ish.c b/drivers/hid/intel-ish-hid/ipc/pci-ish.c index 582e449be9fe..a2c53ea3b5ed 100644 --- a/drivers/hid/intel-ish-hid/ipc/pci-ish.c +++ b/drivers/hid/intel-ish-hid/ipc/pci-ish.c @@ -205,8 +205,7 @@ static void ish_remove(struct pci_dev *pdev) kfree(ishtp_dev); } -#ifdef CONFIG_PM -static struct device *ish_resume_device; +static struct device __maybe_unused *ish_resume_device; /* 50ms to get resume response */ #define WAIT_FOR_RESUME_ACK_MS 50 @@ -220,7 +219,7 @@ static struct device *ish_resume_device; * in that case a simple resume message is enough, others we need * a reset sequence. */ -static void ish_resume_handler(struct work_struct *work) +static void __maybe_unused ish_resume_handler(struct work_struct *work) { struct pci_dev *pdev = to_pci_dev(ish_resume_device); struct ishtp_device *dev = pci_get_drvdata(pdev); @@ -262,7 +261,7 @@ static void ish_resume_handler(struct work_struct *work) * * Return: 0 to the pm core */ -static int ish_suspend(struct device *device) +static int __maybe_unused ish_suspend(struct device *device) { struct pci_dev *pdev = to_pci_dev(device); struct ishtp_device *dev = pci_get_drvdata(pdev); @@ -288,7 +287,7 @@ static int ish_suspend(struct device *device) return 0; } -static DECLARE_WORK(resume_work, ish_resume_handler); +static __maybe_unused DECLARE_WORK(resume_work, ish_resume_handler); /** * ish_resume() - ISH resume callback * @device: device pointer @@ -297,7 +296,7 @@ static DECLARE_WORK(resume_work, ish_resume_handler); * * Return: 0 to the pm core */ -static int ish_resume(struct device *device) +static int __maybe_unused ish_resume(struct device *device) { struct pci_dev *pdev = to_pci_dev(device); struct ishtp_device *dev = pci_get_drvdata(pdev); @@ -311,21 +310,14 @@ static int ish_resume(struct device *device) return 0; } -static const struct dev_pm_ops ish_pm_ops = { - .suspend = ish_suspend, - .resume = ish_resume, -}; -#define ISHTP_ISH_PM_OPS (&ish_pm_ops) -#else -#define ISHTP_ISH_PM_OPS NULL -#endif /* CONFIG_PM */ +static SIMPLE_DEV_PM_OPS(ish_pm_ops, ish_suspend, ish_resume); static struct pci_driver ish_driver = { .name = KBUILD_MODNAME, .id_table = ish_pci_tbl, .probe = ish_probe, .remove = ish_remove, - .driver.pm = ISHTP_ISH_PM_OPS, + .driver.pm = &ish_pm_ops, }; module_pci_driver(ish_driver); diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c index c101369b51de..d6797535fff9 100644 --- a/drivers/hid/wacom_sys.c +++ b/drivers/hid/wacom_sys.c @@ -395,6 +395,14 @@ static void wacom_usage_mapping(struct hid_device *hdev, } } + /* 2nd-generation Intuos Pro Large has incorrect Y maximum */ + if (hdev->vendor == USB_VENDOR_ID_WACOM && + hdev->product == 0x0358 && + WACOM_PEN_FIELD(field) && + wacom_equivalent_usage(usage->hid) == HID_GD_Y) { + field->logical_maximum = 43200; + } + switch (usage->hid) { case HID_GD_X: features->x_max = field->logical_maximum; diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c index bf3bb7e1adab..9d3ef879dc51 100644 --- a/drivers/hwmon/dell-smm-hwmon.c +++ b/drivers/hwmon/dell-smm-hwmon.c @@ -1074,6 +1074,13 @@ static struct dmi_system_id i8k_blacklist_fan_support_dmi_table[] __initdata = { DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Vostro 3360"), }, }, + { + .ident = "Dell XPS13 9333", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "XPS13 9333"), + }, + }, { } }; diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c index 155d4d1d1585..f9d1349c3286 100644 --- a/drivers/hwmon/nct6775.c +++ b/drivers/hwmon/nct6775.c @@ -4175,7 +4175,7 @@ static int nct6775_probe(struct platform_device *pdev) * The temperature is already monitored if the respective bit in <mask> * is set. */ - for (i = 0; i < 32; i++) { + for (i = 0; i < 31; i++) { if (!(data->temp_mask & BIT(i + 1))) continue; if (!reg_temp_alternate[i]) diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c index 4a34f311e1ff..6ec65adaba49 100644 --- a/drivers/i2c/algos/i2c-algo-bit.c +++ b/drivers/i2c/algos/i2c-algo-bit.c @@ -647,10 +647,10 @@ static int __i2c_bit_add_bus(struct i2c_adapter *adap, if (bit_adap->getscl == NULL) adap->quirks = &i2c_bit_quirk_no_clk_stretch; - /* Bring bus to a known state. Looks like STOP if bus is not free yet */ - setscl(bit_adap, 1); - udelay(bit_adap->udelay); - setsda(bit_adap, 1); + /* + * We tried forcing SCL/SDA to an initial state here. But that caused a + * regression, sadly. Check Bugzilla #200045 for details. + */ ret = add_adapter(adap); if (ret < 0) diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c index 005e6e0330c2..66f85bbf3591 100644 --- a/drivers/i2c/busses/i2c-gpio.c +++ b/drivers/i2c/busses/i2c-gpio.c @@ -279,9 +279,9 @@ static int i2c_gpio_probe(struct platform_device *pdev) * required for an I2C bus. */ if (pdata->scl_is_open_drain) - gflags = GPIOD_OUT_LOW; + gflags = GPIOD_OUT_HIGH; else - gflags = GPIOD_OUT_LOW_OPEN_DRAIN; + gflags = GPIOD_OUT_HIGH_OPEN_DRAIN; priv->scl = i2c_gpio_get_desc(dev, "scl", 1, gflags); if (IS_ERR(priv->scl)) return PTR_ERR(priv->scl); diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c index f3f683041e7f..51970bae3c4a 100644 --- a/drivers/i2c/i2c-core-smbus.c +++ b/drivers/i2c/i2c-core-smbus.c @@ -465,15 +465,18 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr, status = i2c_transfer(adapter, msg, num); if (status < 0) - return status; - if (status != num) - return -EIO; + goto cleanup; + if (status != num) { + status = -EIO; + goto cleanup; + } + status = 0; /* Check PEC if last message is a read */ if (i && (msg[num-1].flags & I2C_M_RD)) { status = i2c_smbus_check_pec(partial_pec, &msg[num-1]); if (status < 0) - return status; + goto cleanup; } if (read_write == I2C_SMBUS_READ) @@ -499,12 +502,13 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr, break; } +cleanup: if (msg[0].flags & I2C_M_DMA_SAFE) kfree(msg[0].buf); if (msg[1].flags & I2C_M_DMA_SAFE) kfree(msg[1].buf); - return 0; + return status; } /** diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c index 7e3d82cff3d5..c149c9c360fc 100644 --- a/drivers/iio/accel/mma8452.c +++ b/drivers/iio/accel/mma8452.c @@ -1053,7 +1053,7 @@ static irqreturn_t mma8452_interrupt(int irq, void *p) if (src < 0) return IRQ_NONE; - if (!(src & data->chip_info->enabled_events)) + if (!(src & (data->chip_info->enabled_events | MMA8452_INT_DRDY))) return IRQ_NONE; if (src & MMA8452_INT_DRDY) { diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c index f9c0624505a2..42618fe4f83e 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -959,6 +959,8 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name, } irq_type = irqd_get_trigger_type(desc); + if (!irq_type) + irq_type = IRQF_TRIGGER_RISING; if (irq_type == IRQF_TRIGGER_RISING) st->irq_mask = INV_MPU6050_ACTIVE_HIGH; else if (irq_type == IRQF_TRIGGER_FALLING) diff --git a/drivers/iio/light/tsl2772.c b/drivers/iio/light/tsl2772.c index 34d42a2504c9..df5b2a0da96c 100644 --- a/drivers/iio/light/tsl2772.c +++ b/drivers/iio/light/tsl2772.c @@ -582,6 +582,8 @@ static int tsl2772_als_calibrate(struct iio_dev *indio_dev) "%s: failed to get lux\n", __func__); return lux_val; } + if (lux_val == 0) + return -ERANGE; ret = (chip->settings.als_cal_target * chip->settings.als_gain_trim) / lux_val; diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index 5ec3e41b65f2..fe87d27779d9 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -415,10 +415,9 @@ static int bmp280_read_humid(struct bmp280_data *data, int *val, int *val2) } comp_humidity = bmp280_compensate_humidity(data, adc_humidity); - *val = comp_humidity; - *val2 = 1024; + *val = comp_humidity * 1000 / 1024; - return IIO_VAL_FRACTIONAL; + return IIO_VAL_INT; } static int bmp280_read_raw(struct iio_dev *indio_dev, diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index 3ae2339dd27a..2094d136513d 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -736,10 +736,6 @@ static ssize_t ib_uverbs_write(struct file *filp, const char __user *buf, if (ret) return ret; - if (!file->ucontext && - (command != IB_USER_VERBS_CMD_GET_CONTEXT || extended)) - return -EINVAL; - if (extended) { if (count < (sizeof(hdr) + sizeof(ex_hdr))) return -EINVAL; @@ -759,6 +755,16 @@ static ssize_t ib_uverbs_write(struct file *filp, const char __user *buf, goto out; } + /* + * Must be after the ib_dev check, as once the RCU clears ib_dev == + * NULL means ucontext == NULL + */ + if (!file->ucontext && + (command != IB_USER_VERBS_CMD_GET_CONTEXT || extended)) { + ret = -EINVAL; + goto out; + } + if (!verify_command_mask(ib_dev, command, extended)) { ret = -EOPNOTSUPP; goto out; diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c index 0b56828c1319..9d6beb948535 100644 --- a/drivers/infiniband/core/verbs.c +++ b/drivers/infiniband/core/verbs.c @@ -1562,11 +1562,12 @@ EXPORT_SYMBOL(ib_destroy_qp); /* Completion queues */ -struct ib_cq *ib_create_cq(struct ib_device *device, - ib_comp_handler comp_handler, - void (*event_handler)(struct ib_event *, void *), - void *cq_context, - const struct ib_cq_init_attr *cq_attr) +struct ib_cq *__ib_create_cq(struct ib_device *device, + ib_comp_handler comp_handler, + void (*event_handler)(struct ib_event *, void *), + void *cq_context, + const struct ib_cq_init_attr *cq_attr, + const char *caller) { struct ib_cq *cq; @@ -1580,12 +1581,13 @@ struct ib_cq *ib_create_cq(struct ib_device *device, cq->cq_context = cq_context; atomic_set(&cq->usecnt, 0); cq->res.type = RDMA_RESTRACK_CQ; + cq->res.kern_name = caller; rdma_restrack_add(&cq->res); } return cq; } -EXPORT_SYMBOL(ib_create_cq); +EXPORT_SYMBOL(__ib_create_cq); int rdma_set_cq_moderation(struct ib_cq *cq, u16 cq_count, u16 cq_period) { diff --git a/drivers/infiniband/hw/mlx4/mr.c b/drivers/infiniband/hw/mlx4/mr.c index ed1f253faf97..c7c85c22e4e3 100644 --- a/drivers/infiniband/hw/mlx4/mr.c +++ b/drivers/infiniband/hw/mlx4/mr.c @@ -486,8 +486,11 @@ int mlx4_ib_rereg_user_mr(struct ib_mr *mr, int flags, } if (flags & IB_MR_REREG_ACCESS) { - if (ib_access_writable(mr_access_flags) && !mmr->umem->writable) - return -EPERM; + if (ib_access_writable(mr_access_flags) && + !mmr->umem->writable) { + err = -EPERM; + goto release_mpt_entry; + } err = mlx4_mr_hw_change_access(dev->dev, *pmpt_entry, convert_access(mr_access_flags)); diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c index e52dd21519b4..e3e330f59c2c 100644 --- a/drivers/infiniband/hw/mlx5/main.c +++ b/drivers/infiniband/hw/mlx5/main.c @@ -3199,8 +3199,8 @@ static int flow_counters_set_data(struct ib_counters *ibcounters, if (!mcounters->hw_cntrs_hndl) { mcounters->hw_cntrs_hndl = mlx5_fc_create( to_mdev(ibcounters->device)->mdev, false); - if (!mcounters->hw_cntrs_hndl) { - ret = -ENOMEM; + if (IS_ERR(mcounters->hw_cntrs_hndl)) { + ret = PTR_ERR(mcounters->hw_cntrs_hndl); goto free; } hw_hndl = true; @@ -3546,29 +3546,35 @@ static struct ib_flow *mlx5_ib_create_flow(struct ib_qp *qp, return ERR_PTR(-ENOMEM); err = ib_copy_from_udata(ucmd, udata, required_ucmd_sz); - if (err) { - kfree(ucmd); - return ERR_PTR(err); - } + if (err) + goto free_ucmd; } - if (flow_attr->priority > MLX5_IB_FLOW_LAST_PRIO) - return ERR_PTR(-ENOMEM); + if (flow_attr->priority > MLX5_IB_FLOW_LAST_PRIO) { + err = -ENOMEM; + goto free_ucmd; + } if (domain != IB_FLOW_DOMAIN_USER || flow_attr->port > dev->num_ports || (flow_attr->flags & ~(IB_FLOW_ATTR_FLAGS_DONT_TRAP | - IB_FLOW_ATTR_FLAGS_EGRESS))) - return ERR_PTR(-EINVAL); + IB_FLOW_ATTR_FLAGS_EGRESS))) { + err = -EINVAL; + goto free_ucmd; + } if (is_egress && (flow_attr->type == IB_FLOW_ATTR_ALL_DEFAULT || - flow_attr->type == IB_FLOW_ATTR_MC_DEFAULT)) - return ERR_PTR(-EINVAL); + flow_attr->type == IB_FLOW_ATTR_MC_DEFAULT)) { + err = -EINVAL; + goto free_ucmd; + } dst = kzalloc(sizeof(*dst), GFP_KERNEL); - if (!dst) - return ERR_PTR(-ENOMEM); + if (!dst) { + err = -ENOMEM; + goto free_ucmd; + } mutex_lock(&dev->flow_db->lock); @@ -3637,8 +3643,8 @@ destroy_ft: unlock: mutex_unlock(&dev->flow_db->lock); kfree(dst); +free_ucmd: kfree(ucmd); - kfree(handler); return ERR_PTR(err); } diff --git a/drivers/infiniband/hw/qedr/verbs.c b/drivers/infiniband/hw/qedr/verbs.c index f7ac8fc9b531..f07b8df96f43 100644 --- a/drivers/infiniband/hw/qedr/verbs.c +++ b/drivers/infiniband/hw/qedr/verbs.c @@ -1957,6 +1957,9 @@ int qedr_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, } if (attr_mask & (IB_QP_AV | IB_QP_PATH_MTU)) { + if (rdma_protocol_iwarp(&dev->ibdev, 1)) + return -EINVAL; + if (attr_mask & IB_QP_PATH_MTU) { if (attr->path_mtu < IB_MTU_256 || attr->path_mtu > IB_MTU_4096) { diff --git a/drivers/infiniband/sw/rxe/rxe_req.c b/drivers/infiniband/sw/rxe/rxe_req.c index f30eeba3f772..8be27238a86e 100644 --- a/drivers/infiniband/sw/rxe/rxe_req.c +++ b/drivers/infiniband/sw/rxe/rxe_req.c @@ -645,6 +645,9 @@ next_wqe: } else { goto exit; } + if ((wqe->wr.send_flags & IB_SEND_SIGNALED) || + qp->sq_sig_type == IB_SIGNAL_ALL_WR) + rxe_run_task(&qp->comp.task, 1); qp->req.wqe_index = next_index(qp->sq.queue, qp->req.wqe_index); goto next_wqe; @@ -709,6 +712,7 @@ next_wqe: if (fill_packet(qp, wqe, &pkt, skb, payload)) { pr_debug("qp#%d Error during fill packet\n", qp_num(qp)); + kfree_skb(skb); goto err; } @@ -740,7 +744,6 @@ next_wqe: goto next_wqe; err: - kfree_skb(skb); wqe->status = IB_WC_LOC_PROT_ERR; wqe->state = wqe_state_error; __rxe_do_task(&qp->comp.task); diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c index cf30523c6ef6..6c7326c93721 100644 --- a/drivers/input/input-mt.c +++ b/drivers/input/input-mt.c @@ -131,8 +131,10 @@ EXPORT_SYMBOL(input_mt_destroy_slots); * inactive, or if the tool type is changed, a new tracking id is * assigned to the slot. The tool type is only reported if the * corresponding absbit field is set. + * + * Returns true if contact is active. */ -void input_mt_report_slot_state(struct input_dev *dev, +bool input_mt_report_slot_state(struct input_dev *dev, unsigned int tool_type, bool active) { struct input_mt *mt = dev->mt; @@ -140,22 +142,24 @@ void input_mt_report_slot_state(struct input_dev *dev, int id; if (!mt) - return; + return false; slot = &mt->slots[mt->slot]; slot->frame = mt->frame; if (!active) { input_event(dev, EV_ABS, ABS_MT_TRACKING_ID, -1); - return; + return false; } id = input_mt_get_value(slot, ABS_MT_TRACKING_ID); - if (id < 0 || input_mt_get_value(slot, ABS_MT_TOOL_TYPE) != tool_type) + if (id < 0) id = input_mt_new_trkid(mt); input_event(dev, EV_ABS, ABS_MT_TRACKING_ID, id); input_event(dev, EV_ABS, ABS_MT_TOOL_TYPE, tool_type); + + return true; } EXPORT_SYMBOL(input_mt_report_slot_state); diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 48e36acbeb49..cd620e009bad 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -125,7 +125,7 @@ static const struct xpad_device { u8 mapping; u8 xtype; } xpad_device[] = { - { 0x0079, 0x18d4, "GPD Win 2 Controller", 0, XTYPE_XBOX360 }, + { 0x0079, 0x18d4, "GPD Win 2 X-Box Controller", 0, XTYPE_XBOX360 }, { 0x044f, 0x0f00, "Thrustmaster Wheel", 0, XTYPE_XBOX }, { 0x044f, 0x0f03, "Thrustmaster Wheel", 0, XTYPE_XBOX }, { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX }, diff --git a/drivers/input/keyboard/goldfish_events.c b/drivers/input/keyboard/goldfish_events.c index f6e643b589b6..e8dae6195b30 100644 --- a/drivers/input/keyboard/goldfish_events.c +++ b/drivers/input/keyboard/goldfish_events.c @@ -45,7 +45,7 @@ struct event_dev { static irqreturn_t events_interrupt(int irq, void *dev_id) { struct event_dev *edev = dev_id; - unsigned type, code, value; + unsigned int type, code, value; type = __raw_readl(edev->addr + REG_READ); code = __raw_readl(edev->addr + REG_READ); @@ -57,7 +57,7 @@ static irqreturn_t events_interrupt(int irq, void *dev_id) } static void events_import_bits(struct event_dev *edev, - unsigned long bits[], unsigned type, size_t count) + unsigned long bits[], unsigned int type, size_t count) { void __iomem *addr = edev->addr; int i, j; @@ -99,6 +99,7 @@ static void events_import_abs_params(struct event_dev *edev) for (j = 0; j < ARRAY_SIZE(val); j++) { int offset = (i * ARRAY_SIZE(val) + j) * sizeof(u32); + val[j] = __raw_readl(edev->addr + REG_DATA + offset); } @@ -112,7 +113,7 @@ static int events_probe(struct platform_device *pdev) struct input_dev *input_dev; struct event_dev *edev; struct resource *res; - unsigned keymapnamelen; + unsigned int keymapnamelen; void __iomem *addr; int irq; int i; @@ -150,7 +151,7 @@ static int events_probe(struct platform_device *pdev) for (i = 0; i < keymapnamelen; i++) edev->name[i] = __raw_readb(edev->addr + REG_DATA + i); - pr_debug("events_probe() keymap=%s\n", edev->name); + pr_debug("%s: keymap=%s\n", __func__, edev->name); input_dev->name = edev->name; input_dev->id.bustype = BUS_HOST; diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index c25606e00693..ca59a2be9bc5 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -841,4 +841,14 @@ config INPUT_RAVE_SP_PWRBUTTON To compile this driver as a module, choose M here: the module will be called rave-sp-pwrbutton. +config INPUT_SC27XX_VIBRA + tristate "Spreadtrum sc27xx vibrator support" + depends on MFD_SC27XX_PMIC || COMPILE_TEST + select INPUT_FF_MEMLESS + help + This option enables support for Spreadtrum sc27xx vibrator driver. + + To compile this driver as a module, choose M here. The module will + be called sc27xx_vibra. + endif diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 72cde28649e2..9d0f9d1ff68f 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -66,6 +66,7 @@ obj-$(CONFIG_INPUT_RETU_PWRBUTTON) += retu-pwrbutton.o obj-$(CONFIG_INPUT_AXP20X_PEK) += axp20x-pek.o obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o obj-$(CONFIG_INPUT_RK805_PWRKEY) += rk805-pwrkey.o +obj-$(CONFIG_INPUT_SC27XX_VIBRA) += sc27xx-vibra.o obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o obj-$(CONFIG_INPUT_SIRFSOC_ONKEY) += sirfsoc-onkey.o obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY) += soc_button_array.o diff --git a/drivers/input/misc/sc27xx-vibra.c b/drivers/input/misc/sc27xx-vibra.c new file mode 100644 index 000000000000..295251abbdac --- /dev/null +++ b/drivers/input/misc/sc27xx-vibra.c @@ -0,0 +1,154 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 Spreadtrum Communications Inc. + */ + +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/input.h> +#include <linux/workqueue.h> + +#define CUR_DRV_CAL_SEL GENMASK(13, 12) +#define SLP_LDOVIBR_PD_EN BIT(9) +#define LDO_VIBR_PD BIT(8) + +struct vibra_info { + struct input_dev *input_dev; + struct work_struct play_work; + struct regmap *regmap; + u32 base; + u32 strength; + bool enabled; +}; + +static void sc27xx_vibra_set(struct vibra_info *info, bool on) +{ + if (on) { + regmap_update_bits(info->regmap, info->base, LDO_VIBR_PD, 0); + regmap_update_bits(info->regmap, info->base, + SLP_LDOVIBR_PD_EN, 0); + info->enabled = true; + } else { + regmap_update_bits(info->regmap, info->base, LDO_VIBR_PD, + LDO_VIBR_PD); + regmap_update_bits(info->regmap, info->base, + SLP_LDOVIBR_PD_EN, SLP_LDOVIBR_PD_EN); + info->enabled = false; + } +} + +static int sc27xx_vibra_hw_init(struct vibra_info *info) +{ + return regmap_update_bits(info->regmap, info->base, CUR_DRV_CAL_SEL, 0); +} + +static void sc27xx_vibra_play_work(struct work_struct *work) +{ + struct vibra_info *info = container_of(work, struct vibra_info, + play_work); + + if (info->strength && !info->enabled) + sc27xx_vibra_set(info, true); + else if (info->strength == 0 && info->enabled) + sc27xx_vibra_set(info, false); +} + +static int sc27xx_vibra_play(struct input_dev *input, void *data, + struct ff_effect *effect) +{ + struct vibra_info *info = input_get_drvdata(input); + + info->strength = effect->u.rumble.weak_magnitude; + schedule_work(&info->play_work); + + return 0; +} + +static void sc27xx_vibra_close(struct input_dev *input) +{ + struct vibra_info *info = input_get_drvdata(input); + + cancel_work_sync(&info->play_work); + if (info->enabled) + sc27xx_vibra_set(info, false); +} + +static int sc27xx_vibra_probe(struct platform_device *pdev) +{ + struct vibra_info *info; + int error; + + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!info->regmap) { + dev_err(&pdev->dev, "failed to get vibrator regmap.\n"); + return -ENODEV; + } + + error = device_property_read_u32(&pdev->dev, "reg", &info->base); + if (error) { + dev_err(&pdev->dev, "failed to get vibrator base address.\n"); + return error; + } + + info->input_dev = devm_input_allocate_device(&pdev->dev); + if (!info->input_dev) { + dev_err(&pdev->dev, "failed to allocate input device.\n"); + return -ENOMEM; + } + + info->input_dev->name = "sc27xx:vibrator"; + info->input_dev->id.version = 0; + info->input_dev->close = sc27xx_vibra_close; + + input_set_drvdata(info->input_dev, info); + input_set_capability(info->input_dev, EV_FF, FF_RUMBLE); + INIT_WORK(&info->play_work, sc27xx_vibra_play_work); + info->enabled = false; + + error = sc27xx_vibra_hw_init(info); + if (error) { + dev_err(&pdev->dev, "failed to initialize the vibrator.\n"); + return error; + } + + error = input_ff_create_memless(info->input_dev, NULL, + sc27xx_vibra_play); + if (error) { + dev_err(&pdev->dev, "failed to register vibrator to FF.\n"); + return error; + } + + error = input_register_device(info->input_dev); + if (error) { + dev_err(&pdev->dev, "failed to register input device.\n"); + return error; + } + + return 0; +} + +static const struct of_device_id sc27xx_vibra_of_match[] = { + { .compatible = "sprd,sc2731-vibrator", }, + {} +}; +MODULE_DEVICE_TABLE(of, sc27xx_vibra_of_match); + +static struct platform_driver sc27xx_vibra_driver = { + .driver = { + .name = "sc27xx-vibrator", + .of_match_table = sc27xx_vibra_of_match, + }, + .probe = sc27xx_vibra_probe, +}; + +module_platform_driver(sc27xx_vibra_driver); + +MODULE_DESCRIPTION("Spreadtrum SC27xx Vibrator Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Xiaotong Lu <xiaotong.lu@spreadtrum.com>"); diff --git a/drivers/input/mouse/elan_i2c.h b/drivers/input/mouse/elan_i2c.h index 599544c1a91c..243e0fa6e3e3 100644 --- a/drivers/input/mouse/elan_i2c.h +++ b/drivers/input/mouse/elan_i2c.h @@ -27,6 +27,8 @@ #define ETP_DISABLE_POWER 0x0001 #define ETP_PRESSURE_OFFSET 25 +#define ETP_CALIBRATE_MAX_LEN 3 + /* IAP Firmware handling */ #define ETP_PRODUCT_ID_FORMAT_STRING "%d.0" #define ETP_FW_NAME "elan_i2c_" ETP_PRODUCT_ID_FORMAT_STRING ".bin" diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c index 8ff75114e762..1f9cd7d8b7ad 100644 --- a/drivers/input/mouse/elan_i2c_core.c +++ b/drivers/input/mouse/elan_i2c_core.c @@ -613,7 +613,7 @@ static ssize_t calibrate_store(struct device *dev, int tries = 20; int retval; int error; - u8 val[3]; + u8 val[ETP_CALIBRATE_MAX_LEN]; retval = mutex_lock_interruptible(&data->sysfs_mutex); if (retval) @@ -1345,6 +1345,7 @@ static const struct acpi_device_id elan_acpi_id[] = { { "ELAN060C", 0 }, { "ELAN0611", 0 }, { "ELAN0612", 0 }, + { "ELAN0618", 0 }, { "ELAN1000", 0 }, { } }; diff --git a/drivers/input/mouse/elan_i2c_smbus.c b/drivers/input/mouse/elan_i2c_smbus.c index cfcb32559925..c060d270bc4d 100644 --- a/drivers/input/mouse/elan_i2c_smbus.c +++ b/drivers/input/mouse/elan_i2c_smbus.c @@ -56,7 +56,7 @@ static int elan_smbus_initialize(struct i2c_client *client) { u8 check[ETP_SMBUS_HELLOPACKET_LEN] = { 0x55, 0x55, 0x55, 0x55, 0x55 }; - u8 values[ETP_SMBUS_HELLOPACKET_LEN] = { 0, 0, 0, 0, 0 }; + u8 values[I2C_SMBUS_BLOCK_MAX] = {0}; int len, error; /* Get hello packet */ @@ -117,12 +117,16 @@ static int elan_smbus_calibrate(struct i2c_client *client) static int elan_smbus_calibrate_result(struct i2c_client *client, u8 *val) { int error; + u8 buf[I2C_SMBUS_BLOCK_MAX] = {0}; + + BUILD_BUG_ON(ETP_CALIBRATE_MAX_LEN > sizeof(buf)); error = i2c_smbus_read_block_data(client, - ETP_SMBUS_CALIBRATE_QUERY, val); + ETP_SMBUS_CALIBRATE_QUERY, buf); if (error < 0) return error; + memcpy(val, buf, ETP_CALIBRATE_MAX_LEN); return 0; } @@ -472,6 +476,8 @@ static int elan_smbus_get_report(struct i2c_client *client, u8 *report) { int len; + BUILD_BUG_ON(I2C_SMBUS_BLOCK_MAX > ETP_SMBUS_REPORT_LEN); + len = i2c_smbus_read_block_data(client, ETP_SMBUS_PACKET_QUERY, &report[ETP_SMBUS_REPORT_OFFSET]); diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index fb4d902c4403..dd85b16dc6f8 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -799,7 +799,7 @@ static int elantech_packet_check_v4(struct psmouse *psmouse) else if (ic_version == 7 && etd->info.samples[1] == 0x2A) sanity_check = ((packet[3] & 0x1c) == 0x10); else - sanity_check = ((packet[0] & 0x0c) == 0x04 && + sanity_check = ((packet[0] & 0x08) == 0x00 && (packet[3] & 0x1c) == 0x10); if (!sanity_check) @@ -1175,6 +1175,12 @@ static const struct dmi_system_id elantech_dmi_has_middle_button[] = { { } }; +static const char * const middle_button_pnp_ids[] = { + "LEN2131", /* ThinkPad P52 w/ NFC */ + "LEN2132", /* ThinkPad P52 */ + NULL +}; + /* * Set the appropriate event bits for the input subsystem */ @@ -1194,7 +1200,8 @@ static int elantech_set_input_params(struct psmouse *psmouse) __clear_bit(EV_REL, dev->evbit); __set_bit(BTN_LEFT, dev->keybit); - if (dmi_check_system(elantech_dmi_has_middle_button)) + if (dmi_check_system(elantech_dmi_has_middle_button) || + psmouse_matches_pnp_id(psmouse, middle_button_pnp_ids)) __set_bit(BTN_MIDDLE, dev->keybit); __set_bit(BTN_RIGHT, dev->keybit); diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index 5ff5b1952be0..d3ff1fc09af7 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -192,8 +192,8 @@ psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse) else input_report_rel(dev, REL_WHEEL, -wheel); - input_report_key(dev, BTN_SIDE, BIT(4)); - input_report_key(dev, BTN_EXTRA, BIT(5)); + input_report_key(dev, BTN_SIDE, packet[3] & BIT(4)); + input_report_key(dev, BTN_EXTRA, packet[3] & BIT(5)); break; } break; @@ -203,13 +203,13 @@ psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse) input_report_rel(dev, REL_WHEEL, -(s8) packet[3]); /* Extra buttons on Genius NewNet 3D */ - input_report_key(dev, BTN_SIDE, BIT(6)); - input_report_key(dev, BTN_EXTRA, BIT(7)); + input_report_key(dev, BTN_SIDE, packet[0] & BIT(6)); + input_report_key(dev, BTN_EXTRA, packet[0] & BIT(7)); break; case PSMOUSE_THINKPS: /* Extra button on ThinkingMouse */ - input_report_key(dev, BTN_EXTRA, BIT(3)); + input_report_key(dev, BTN_EXTRA, packet[0] & BIT(3)); /* * Without this bit of weirdness moving up gives wildly @@ -223,7 +223,7 @@ psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse) * Cortron PS2 Trackball reports SIDE button in the * 4th bit of the first byte. */ - input_report_key(dev, BTN_SIDE, BIT(3)); + input_report_key(dev, BTN_SIDE, packet[0] & BIT(3)); packet[0] |= BIT(3); break; diff --git a/drivers/input/rmi4/Kconfig b/drivers/input/rmi4/Kconfig index 7172b88cd064..fad2eae4a118 100644 --- a/drivers/input/rmi4/Kconfig +++ b/drivers/input/rmi4/Kconfig @@ -3,6 +3,7 @@ # config RMI4_CORE tristate "Synaptics RMI4 bus support" + select IRQ_DOMAIN help Say Y here if you want to support the Synaptics RMI4 bus. This is required for all RMI4 device support. diff --git a/drivers/input/rmi4/rmi_2d_sensor.c b/drivers/input/rmi4/rmi_2d_sensor.c index 8bb866c7b985..8eeffa066022 100644 --- a/drivers/input/rmi4/rmi_2d_sensor.c +++ b/drivers/input/rmi4/rmi_2d_sensor.c @@ -32,15 +32,15 @@ void rmi_2d_sensor_abs_process(struct rmi_2d_sensor *sensor, if (obj->type == RMI_2D_OBJECT_NONE) return; - if (axis_align->swap_axes) - swap(obj->x, obj->y); - if (axis_align->flip_x) obj->x = sensor->max_x - obj->x; if (axis_align->flip_y) obj->y = sensor->max_y - obj->y; + if (axis_align->swap_axes) + swap(obj->x, obj->y); + /* * Here checking if X offset or y offset are specified is * redundant. We just add the offsets or clip the values. @@ -120,15 +120,15 @@ void rmi_2d_sensor_rel_report(struct rmi_2d_sensor *sensor, int x, int y) x = min(RMI_2D_REL_POS_MAX, max(RMI_2D_REL_POS_MIN, (int)x)); y = min(RMI_2D_REL_POS_MAX, max(RMI_2D_REL_POS_MIN, (int)y)); - if (axis_align->swap_axes) - swap(x, y); - if (axis_align->flip_x) x = min(RMI_2D_REL_POS_MAX, -x); if (axis_align->flip_y) y = min(RMI_2D_REL_POS_MAX, -y); + if (axis_align->swap_axes) + swap(x, y); + if (x || y) { input_report_rel(sensor->input, REL_X, x); input_report_rel(sensor->input, REL_Y, y); @@ -141,17 +141,10 @@ static void rmi_2d_sensor_set_input_params(struct rmi_2d_sensor *sensor) struct input_dev *input = sensor->input; int res_x; int res_y; + int max_x, max_y; int input_flags = 0; if (sensor->report_abs) { - if (sensor->axis_align.swap_axes) { - swap(sensor->max_x, sensor->max_y); - swap(sensor->axis_align.clip_x_low, - sensor->axis_align.clip_y_low); - swap(sensor->axis_align.clip_x_high, - sensor->axis_align.clip_y_high); - } - sensor->min_x = sensor->axis_align.clip_x_low; if (sensor->axis_align.clip_x_high) sensor->max_x = min(sensor->max_x, @@ -163,14 +156,19 @@ static void rmi_2d_sensor_set_input_params(struct rmi_2d_sensor *sensor) sensor->axis_align.clip_y_high); set_bit(EV_ABS, input->evbit); - input_set_abs_params(input, ABS_MT_POSITION_X, 0, sensor->max_x, - 0, 0); - input_set_abs_params(input, ABS_MT_POSITION_Y, 0, sensor->max_y, - 0, 0); + + max_x = sensor->max_x; + max_y = sensor->max_y; + if (sensor->axis_align.swap_axes) + swap(max_x, max_y); + input_set_abs_params(input, ABS_MT_POSITION_X, 0, max_x, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, max_y, 0, 0); if (sensor->x_mm && sensor->y_mm) { res_x = (sensor->max_x - sensor->min_x) / sensor->x_mm; res_y = (sensor->max_y - sensor->min_y) / sensor->y_mm; + if (sensor->axis_align.swap_axes) + swap(res_x, res_y); input_abs_set_res(input, ABS_X, res_x); input_abs_set_res(input, ABS_Y, res_y); diff --git a/drivers/input/rmi4/rmi_bus.c b/drivers/input/rmi4/rmi_bus.c index c5fa53adba8d..bd0d5ff01b08 100644 --- a/drivers/input/rmi4/rmi_bus.c +++ b/drivers/input/rmi4/rmi_bus.c @@ -9,6 +9,8 @@ #include <linux/kernel.h> #include <linux/device.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> #include <linux/list.h> #include <linux/pm.h> #include <linux/rmi.h> @@ -167,6 +169,39 @@ static inline void rmi_function_of_probe(struct rmi_function *fn) {} #endif +static struct irq_chip rmi_irq_chip = { + .name = "rmi4", +}; + +static int rmi_create_function_irq(struct rmi_function *fn, + struct rmi_function_handler *handler) +{ + struct rmi_driver_data *drvdata = dev_get_drvdata(&fn->rmi_dev->dev); + int i, error; + + for (i = 0; i < fn->num_of_irqs; i++) { + set_bit(fn->irq_pos + i, fn->irq_mask); + + fn->irq[i] = irq_create_mapping(drvdata->irqdomain, + fn->irq_pos + i); + + irq_set_chip_data(fn->irq[i], fn); + irq_set_chip_and_handler(fn->irq[i], &rmi_irq_chip, + handle_simple_irq); + irq_set_nested_thread(fn->irq[i], 1); + + error = devm_request_threaded_irq(&fn->dev, fn->irq[i], NULL, + handler->attention, IRQF_ONESHOT, + dev_name(&fn->dev), fn); + if (error) { + dev_err(&fn->dev, "Error %d registering IRQ\n", error); + return error; + } + } + + return 0; +} + static int rmi_function_probe(struct device *dev) { struct rmi_function *fn = to_rmi_function(dev); @@ -178,7 +213,14 @@ static int rmi_function_probe(struct device *dev) if (handler->probe) { error = handler->probe(fn); - return error; + if (error) + return error; + } + + if (fn->num_of_irqs && handler->attention) { + error = rmi_create_function_irq(fn, handler); + if (error) + return error; } return 0; @@ -230,12 +272,18 @@ err_put_device: void rmi_unregister_function(struct rmi_function *fn) { + int i; + rmi_dbg(RMI_DEBUG_CORE, &fn->dev, "Unregistering F%02X.\n", fn->fd.function_number); device_del(&fn->dev); of_node_put(fn->dev.of_node); put_device(&fn->dev); + + for (i = 0; i < fn->num_of_irqs; i++) + irq_dispose_mapping(fn->irq[i]); + } /** diff --git a/drivers/input/rmi4/rmi_bus.h b/drivers/input/rmi4/rmi_bus.h index b7625a9ac66a..96383eab41ba 100644 --- a/drivers/input/rmi4/rmi_bus.h +++ b/drivers/input/rmi4/rmi_bus.h @@ -14,6 +14,12 @@ struct rmi_device; +/* + * The interrupt source count in the function descriptor can represent up to + * 6 interrupt sources in the normal manner. + */ +#define RMI_FN_MAX_IRQS 6 + /** * struct rmi_function - represents the implementation of an RMI4 * function for a particular device (basically, a driver for that RMI4 function) @@ -26,6 +32,7 @@ struct rmi_device; * @irq_pos: The position in the irq bitfield this function holds * @irq_mask: For convenience, can be used to mask IRQ bits off during ATTN * interrupt handling. + * @irqs: assigned virq numbers (up to num_of_irqs) * * @node: entry in device's list of functions */ @@ -36,6 +43,7 @@ struct rmi_function { struct list_head node; unsigned int num_of_irqs; + int irq[RMI_FN_MAX_IRQS]; unsigned int irq_pos; unsigned long irq_mask[]; }; @@ -76,7 +84,7 @@ struct rmi_function_handler { void (*remove)(struct rmi_function *fn); int (*config)(struct rmi_function *fn); int (*reset)(struct rmi_function *fn); - int (*attention)(struct rmi_function *fn, unsigned long *irq_bits); + irqreturn_t (*attention)(int irq, void *ctx); int (*suspend)(struct rmi_function *fn); int (*resume)(struct rmi_function *fn); }; diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c index 7d29053dfb0f..fc3ab93b7aea 100644 --- a/drivers/input/rmi4/rmi_driver.c +++ b/drivers/input/rmi4/rmi_driver.c @@ -21,6 +21,7 @@ #include <linux/pm.h> #include <linux/slab.h> #include <linux/of.h> +#include <linux/irqdomain.h> #include <uapi/linux/input.h> #include <linux/rmi.h> #include "rmi_bus.h" @@ -127,28 +128,11 @@ static int rmi_driver_process_config_requests(struct rmi_device *rmi_dev) return 0; } -static void process_one_interrupt(struct rmi_driver_data *data, - struct rmi_function *fn) -{ - struct rmi_function_handler *fh; - - if (!fn || !fn->dev.driver) - return; - - fh = to_rmi_function_handler(fn->dev.driver); - if (fh->attention) { - bitmap_and(data->fn_irq_bits, data->irq_status, fn->irq_mask, - data->irq_count); - if (!bitmap_empty(data->fn_irq_bits, data->irq_count)) - fh->attention(fn, data->fn_irq_bits); - } -} - static int rmi_process_interrupt_requests(struct rmi_device *rmi_dev) { struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev); struct device *dev = &rmi_dev->dev; - struct rmi_function *entry; + int i; int error; if (!data) @@ -173,16 +157,8 @@ static int rmi_process_interrupt_requests(struct rmi_device *rmi_dev) */ mutex_unlock(&data->irq_mutex); - /* - * It would be nice to be able to use irq_chip to handle these - * nested IRQs. Unfortunately, most of the current customers for - * this driver are using older kernels (3.0.x) that don't support - * the features required for that. Once they've shifted to more - * recent kernels (say, 3.3 and higher), this should be switched to - * use irq_chip. - */ - list_for_each_entry(entry, &data->function_list, node) - process_one_interrupt(data, entry); + for_each_set_bit(i, data->irq_status, data->irq_count) + handle_nested_irq(irq_find_mapping(data->irqdomain, i)); if (data->input) input_sync(data->input); @@ -1001,9 +977,13 @@ EXPORT_SYMBOL_GPL(rmi_driver_resume); static int rmi_driver_remove(struct device *dev) { struct rmi_device *rmi_dev = to_rmi_device(dev); + struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev); rmi_disable_irq(rmi_dev, false); + irq_domain_remove(data->irqdomain); + data->irqdomain = NULL; + rmi_f34_remove_sysfs(rmi_dev); rmi_free_function_list(rmi_dev); @@ -1035,7 +1015,8 @@ int rmi_probe_interrupts(struct rmi_driver_data *data) { struct rmi_device *rmi_dev = data->rmi_dev; struct device *dev = &rmi_dev->dev; - int irq_count; + struct fwnode_handle *fwnode = rmi_dev->xport->dev->fwnode; + int irq_count = 0; size_t size; int retval; @@ -1046,7 +1027,6 @@ int rmi_probe_interrupts(struct rmi_driver_data *data) * being accessed. */ rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Counting IRQs.\n", __func__); - irq_count = 0; data->bootloader_mode = false; retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_count_irqs); @@ -1058,6 +1038,15 @@ int rmi_probe_interrupts(struct rmi_driver_data *data) if (data->bootloader_mode) dev_warn(dev, "Device in bootloader mode.\n"); + /* Allocate and register a linear revmap irq_domain */ + data->irqdomain = irq_domain_create_linear(fwnode, irq_count, + &irq_domain_simple_ops, + data); + if (!data->irqdomain) { + dev_err(&rmi_dev->dev, "Failed to create IRQ domain\n"); + return -ENOMEM; + } + data->irq_count = irq_count; data->num_of_irq_regs = (data->irq_count + 7) / 8; @@ -1080,10 +1069,9 @@ int rmi_init_functions(struct rmi_driver_data *data) { struct rmi_device *rmi_dev = data->rmi_dev; struct device *dev = &rmi_dev->dev; - int irq_count; + int irq_count = 0; int retval; - irq_count = 0; rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Creating functions.\n", __func__); retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_create_function); if (retval < 0) { diff --git a/drivers/input/rmi4/rmi_f01.c b/drivers/input/rmi4/rmi_f01.c index 8a07ae147df6..4edaa14fe878 100644 --- a/drivers/input/rmi4/rmi_f01.c +++ b/drivers/input/rmi4/rmi_f01.c @@ -681,9 +681,9 @@ static int rmi_f01_resume(struct rmi_function *fn) return 0; } -static int rmi_f01_attention(struct rmi_function *fn, - unsigned long *irq_bits) +static irqreturn_t rmi_f01_attention(int irq, void *ctx) { + struct rmi_function *fn = ctx; struct rmi_device *rmi_dev = fn->rmi_dev; int error; u8 device_status; @@ -692,7 +692,7 @@ static int rmi_f01_attention(struct rmi_function *fn, if (error) { dev_err(&fn->dev, "Failed to read device status: %d.\n", error); - return error; + return IRQ_RETVAL(error); } if (RMI_F01_STATUS_BOOTLOADER(device_status)) @@ -704,11 +704,11 @@ static int rmi_f01_attention(struct rmi_function *fn, error = rmi_dev->driver->reset_handler(rmi_dev); if (error) { dev_err(&fn->dev, "Device reset failed: %d\n", error); - return error; + return IRQ_RETVAL(error); } } - return 0; + return IRQ_HANDLED; } struct rmi_function_handler rmi_f01_handler = { diff --git a/drivers/input/rmi4/rmi_f03.c b/drivers/input/rmi4/rmi_f03.c index 88822196d6b7..aaa1edc95522 100644 --- a/drivers/input/rmi4/rmi_f03.c +++ b/drivers/input/rmi4/rmi_f03.c @@ -244,8 +244,9 @@ static int rmi_f03_config(struct rmi_function *fn) return 0; } -static int rmi_f03_attention(struct rmi_function *fn, unsigned long *irq_bits) +static irqreturn_t rmi_f03_attention(int irq, void *ctx) { + struct rmi_function *fn = ctx; struct rmi_device *rmi_dev = fn->rmi_dev; struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev); struct f03_data *f03 = dev_get_drvdata(&fn->dev); @@ -262,7 +263,7 @@ static int rmi_f03_attention(struct rmi_function *fn, unsigned long *irq_bits) /* First grab the data passed by the transport device */ if (drvdata->attn_data.size < ob_len) { dev_warn(&fn->dev, "F03 interrupted, but data is missing!\n"); - return 0; + return IRQ_HANDLED; } memcpy(obs, drvdata->attn_data.data, ob_len); @@ -277,7 +278,7 @@ static int rmi_f03_attention(struct rmi_function *fn, unsigned long *irq_bits) "%s: Failed to read F03 output buffers: %d\n", __func__, error); serio_interrupt(f03->serio, 0, SERIO_TIMEOUT); - return error; + return IRQ_RETVAL(error); } } @@ -303,7 +304,7 @@ static int rmi_f03_attention(struct rmi_function *fn, unsigned long *irq_bits) serio_interrupt(f03->serio, ob_data, serio_flags); } - return 0; + return IRQ_HANDLED; } static void rmi_f03_remove(struct rmi_function *fn) diff --git a/drivers/input/rmi4/rmi_f11.c b/drivers/input/rmi4/rmi_f11.c index 12a233251793..df64d6aed4f7 100644 --- a/drivers/input/rmi4/rmi_f11.c +++ b/drivers/input/rmi4/rmi_f11.c @@ -570,9 +570,7 @@ static inline u8 rmi_f11_parse_finger_state(const u8 *f_state, u8 n_finger) } static void rmi_f11_finger_handler(struct f11_data *f11, - struct rmi_2d_sensor *sensor, - unsigned long *irq_bits, int num_irq_regs, - int size) + struct rmi_2d_sensor *sensor, int size) { const u8 *f_state = f11->data.f_state; u8 finger_state; @@ -581,12 +579,7 @@ static void rmi_f11_finger_handler(struct f11_data *f11, int rel_fingers; int abs_size = sensor->nbr_fingers * RMI_F11_ABS_BYTES; - int abs_bits = bitmap_and(f11->result_bits, irq_bits, f11->abs_mask, - num_irq_regs * 8); - int rel_bits = bitmap_and(f11->result_bits, irq_bits, f11->rel_mask, - num_irq_regs * 8); - - if (abs_bits) { + if (sensor->report_abs) { if (abs_size > size) abs_fingers = size / RMI_F11_ABS_BYTES; else @@ -604,19 +597,7 @@ static void rmi_f11_finger_handler(struct f11_data *f11, rmi_f11_abs_pos_process(f11, sensor, &sensor->objs[i], finger_state, i); } - } - if (rel_bits) { - if ((abs_size + sensor->nbr_fingers * RMI_F11_REL_BYTES) > size) - rel_fingers = (size - abs_size) / RMI_F11_REL_BYTES; - else - rel_fingers = sensor->nbr_fingers; - - for (i = 0; i < rel_fingers; i++) - rmi_f11_rel_pos_report(f11, i); - } - - if (abs_bits) { /* * the absolute part is made in 2 parts to allow the kernel * tracking to take place. @@ -638,7 +619,16 @@ static void rmi_f11_finger_handler(struct f11_data *f11, } input_mt_sync_frame(sensor->input); + } else if (sensor->report_rel) { + if ((abs_size + sensor->nbr_fingers * RMI_F11_REL_BYTES) > size) + rel_fingers = (size - abs_size) / RMI_F11_REL_BYTES; + else + rel_fingers = sensor->nbr_fingers; + + for (i = 0; i < rel_fingers; i++) + rmi_f11_rel_pos_report(f11, i); } + } static int f11_2d_construct_data(struct f11_data *f11) @@ -1276,8 +1266,9 @@ static int rmi_f11_config(struct rmi_function *fn) return 0; } -static int rmi_f11_attention(struct rmi_function *fn, unsigned long *irq_bits) +static irqreturn_t rmi_f11_attention(int irq, void *ctx) { + struct rmi_function *fn = ctx; struct rmi_device *rmi_dev = fn->rmi_dev; struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev); struct f11_data *f11 = dev_get_drvdata(&fn->dev); @@ -1303,13 +1294,12 @@ static int rmi_f11_attention(struct rmi_function *fn, unsigned long *irq_bits) data_base_addr, f11->sensor.data_pkt, f11->sensor.pkt_size); if (error < 0) - return error; + return IRQ_RETVAL(error); } - rmi_f11_finger_handler(f11, &f11->sensor, irq_bits, - drvdata->num_of_irq_regs, valid_bytes); + rmi_f11_finger_handler(f11, &f11->sensor, valid_bytes); - return 0; + return IRQ_HANDLED; } static int rmi_f11_resume(struct rmi_function *fn) diff --git a/drivers/input/rmi4/rmi_f12.c b/drivers/input/rmi4/rmi_f12.c index a3d1aa88f2a9..5c7f48915779 100644 --- a/drivers/input/rmi4/rmi_f12.c +++ b/drivers/input/rmi4/rmi_f12.c @@ -197,10 +197,10 @@ static void rmi_f12_process_objects(struct f12_data *f12, u8 *data1, int size) rmi_2d_sensor_abs_report(sensor, &sensor->objs[i], i); } -static int rmi_f12_attention(struct rmi_function *fn, - unsigned long *irq_nr_regs) +static irqreturn_t rmi_f12_attention(int irq, void *ctx) { int retval; + struct rmi_function *fn = ctx; struct rmi_device *rmi_dev = fn->rmi_dev; struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev); struct f12_data *f12 = dev_get_drvdata(&fn->dev); @@ -222,7 +222,7 @@ static int rmi_f12_attention(struct rmi_function *fn, if (retval < 0) { dev_err(&fn->dev, "Failed to read object data. Code: %d.\n", retval); - return retval; + return IRQ_RETVAL(retval); } } @@ -232,7 +232,7 @@ static int rmi_f12_attention(struct rmi_function *fn, input_mt_sync_frame(sensor->input); - return 0; + return IRQ_HANDLED; } static int rmi_f12_write_control_regs(struct rmi_function *fn) diff --git a/drivers/input/rmi4/rmi_f30.c b/drivers/input/rmi4/rmi_f30.c index 82e0f0d43d55..5e3ed5ac0c3e 100644 --- a/drivers/input/rmi4/rmi_f30.c +++ b/drivers/input/rmi4/rmi_f30.c @@ -122,8 +122,9 @@ static void rmi_f30_report_button(struct rmi_function *fn, } } -static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits) +static irqreturn_t rmi_f30_attention(int irq, void *ctx) { + struct rmi_function *fn = ctx; struct f30_data *f30 = dev_get_drvdata(&fn->dev); struct rmi_driver_data *drvdata = dev_get_drvdata(&fn->rmi_dev->dev); int error; @@ -134,7 +135,7 @@ static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits) if (drvdata->attn_data.size < f30->register_count) { dev_warn(&fn->dev, "F30 interrupted, but data is missing\n"); - return 0; + return IRQ_HANDLED; } memcpy(f30->data_regs, drvdata->attn_data.data, f30->register_count); @@ -147,7 +148,7 @@ static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits) dev_err(&fn->dev, "%s: Failed to read F30 data registers: %d\n", __func__, error); - return error; + return IRQ_RETVAL(error); } } @@ -159,7 +160,7 @@ static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits) rmi_f03_commit_buttons(f30->f03); } - return 0; + return IRQ_HANDLED; } static int rmi_f30_config(struct rmi_function *fn) diff --git a/drivers/input/rmi4/rmi_f34.c b/drivers/input/rmi4/rmi_f34.c index f1f5ac539d5d..87a7d4ba382d 100644 --- a/drivers/input/rmi4/rmi_f34.c +++ b/drivers/input/rmi4/rmi_f34.c @@ -100,8 +100,9 @@ static int rmi_f34_command(struct f34_data *f34, u8 command, return 0; } -static int rmi_f34_attention(struct rmi_function *fn, unsigned long *irq_bits) +static irqreturn_t rmi_f34_attention(int irq, void *ctx) { + struct rmi_function *fn = ctx; struct f34_data *f34 = dev_get_drvdata(&fn->dev); int ret; u8 status; @@ -126,7 +127,7 @@ static int rmi_f34_attention(struct rmi_function *fn, unsigned long *irq_bits) complete(&f34->v7.cmd_done); } - return 0; + return IRQ_HANDLED; } static int rmi_f34_write_blocks(struct f34_data *f34, const void *data, diff --git a/drivers/input/rmi4/rmi_f54.c b/drivers/input/rmi4/rmi_f54.c index e8a59d164019..a6f515bcab22 100644 --- a/drivers/input/rmi4/rmi_f54.c +++ b/drivers/input/rmi4/rmi_f54.c @@ -610,11 +610,6 @@ error: mutex_unlock(&f54->data_mutex); } -static int rmi_f54_attention(struct rmi_function *fn, unsigned long *irqbits) -{ - return 0; -} - static int rmi_f54_config(struct rmi_function *fn) { struct rmi_driver *drv = fn->rmi_dev->driver; @@ -756,6 +751,5 @@ struct rmi_function_handler rmi_f54_handler = { .func = 0x54, .probe = rmi_f54_probe, .config = rmi_f54_config, - .attention = rmi_f54_attention, .remove = rmi_f54_remove, }; diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c index ff7043f74a3d..d196ac3d8b8c 100644 --- a/drivers/input/touchscreen/silead.c +++ b/drivers/input/touchscreen/silead.c @@ -603,6 +603,7 @@ static const struct acpi_device_id silead_ts_acpi_match[] = { { "GSL3692", 0 }, { "MSSL1680", 0 }, { "MSSL0001", 0 }, + { "MSSL0002", 0 }, { } }; MODULE_DEVICE_TABLE(acpi, silead_ts_acpi_match); diff --git a/drivers/irqchip/irq-gic-v2m.c b/drivers/irqchip/irq-gic-v2m.c index 0f52d44b3f69..f5fe0100f9ff 100644 --- a/drivers/irqchip/irq-gic-v2m.c +++ b/drivers/irqchip/irq-gic-v2m.c @@ -199,7 +199,7 @@ static int gicv2m_irq_domain_alloc(struct irq_domain *domain, unsigned int virq, fail: irq_domain_free_irqs_parent(domain, virq, nr_irqs); - gicv2m_unalloc_msi(v2m, hwirq, get_count_order(nr_irqs)); + gicv2m_unalloc_msi(v2m, hwirq, nr_irqs); return err; } diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index 5377d7e2afba..d7842d312d3e 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -182,6 +182,22 @@ static struct its_collection *dev_event_to_col(struct its_device *its_dev, return its->collections + its_dev->event_map.col_map[event]; } +static struct its_collection *valid_col(struct its_collection *col) +{ + if (WARN_ON_ONCE(col->target_address & GENMASK_ULL(0, 15))) + return NULL; + + return col; +} + +static struct its_vpe *valid_vpe(struct its_node *its, struct its_vpe *vpe) +{ + if (valid_col(its->collections + vpe->col_idx)) + return vpe; + + return NULL; +} + /* * ITS command descriptors - parameters to be encoded in a command * block. @@ -439,7 +455,7 @@ static struct its_collection *its_build_mapti_cmd(struct its_node *its, its_fixup_cmd(cmd); - return col; + return valid_col(col); } static struct its_collection *its_build_movi_cmd(struct its_node *its, @@ -458,7 +474,7 @@ static struct its_collection *its_build_movi_cmd(struct its_node *its, its_fixup_cmd(cmd); - return col; + return valid_col(col); } static struct its_collection *its_build_discard_cmd(struct its_node *its, @@ -476,7 +492,7 @@ static struct its_collection *its_build_discard_cmd(struct its_node *its, its_fixup_cmd(cmd); - return col; + return valid_col(col); } static struct its_collection *its_build_inv_cmd(struct its_node *its, @@ -494,7 +510,7 @@ static struct its_collection *its_build_inv_cmd(struct its_node *its, its_fixup_cmd(cmd); - return col; + return valid_col(col); } static struct its_collection *its_build_int_cmd(struct its_node *its, @@ -512,7 +528,7 @@ static struct its_collection *its_build_int_cmd(struct its_node *its, its_fixup_cmd(cmd); - return col; + return valid_col(col); } static struct its_collection *its_build_clear_cmd(struct its_node *its, @@ -530,7 +546,7 @@ static struct its_collection *its_build_clear_cmd(struct its_node *its, its_fixup_cmd(cmd); - return col; + return valid_col(col); } static struct its_collection *its_build_invall_cmd(struct its_node *its, @@ -554,7 +570,7 @@ static struct its_vpe *its_build_vinvall_cmd(struct its_node *its, its_fixup_cmd(cmd); - return desc->its_vinvall_cmd.vpe; + return valid_vpe(its, desc->its_vinvall_cmd.vpe); } static struct its_vpe *its_build_vmapp_cmd(struct its_node *its, @@ -576,7 +592,7 @@ static struct its_vpe *its_build_vmapp_cmd(struct its_node *its, its_fixup_cmd(cmd); - return desc->its_vmapp_cmd.vpe; + return valid_vpe(its, desc->its_vmapp_cmd.vpe); } static struct its_vpe *its_build_vmapti_cmd(struct its_node *its, @@ -599,7 +615,7 @@ static struct its_vpe *its_build_vmapti_cmd(struct its_node *its, its_fixup_cmd(cmd); - return desc->its_vmapti_cmd.vpe; + return valid_vpe(its, desc->its_vmapti_cmd.vpe); } static struct its_vpe *its_build_vmovi_cmd(struct its_node *its, @@ -622,7 +638,7 @@ static struct its_vpe *its_build_vmovi_cmd(struct its_node *its, its_fixup_cmd(cmd); - return desc->its_vmovi_cmd.vpe; + return valid_vpe(its, desc->its_vmovi_cmd.vpe); } static struct its_vpe *its_build_vmovp_cmd(struct its_node *its, @@ -640,7 +656,7 @@ static struct its_vpe *its_build_vmovp_cmd(struct its_node *its, its_fixup_cmd(cmd); - return desc->its_vmovp_cmd.vpe; + return valid_vpe(its, desc->its_vmovp_cmd.vpe); } static u64 its_cmd_ptr_to_offset(struct its_node *its, @@ -1824,11 +1840,16 @@ static int its_alloc_tables(struct its_node *its) static int its_alloc_collections(struct its_node *its) { + int i; + its->collections = kcalloc(nr_cpu_ids, sizeof(*its->collections), GFP_KERNEL); if (!its->collections) return -ENOMEM; + for (i = 0; i < nr_cpu_ids; i++) + its->collections[i].target_address = ~0ULL; + return 0; } @@ -2310,7 +2331,14 @@ static int its_irq_domain_activate(struct irq_domain *domain, cpu_mask = cpumask_of_node(its_dev->its->numa_node); /* Bind the LPI to the first possible CPU */ - cpu = cpumask_first(cpu_mask); + cpu = cpumask_first_and(cpu_mask, cpu_online_mask); + if (cpu >= nr_cpu_ids) { + if (its_dev->its->flags & ITS_FLAGS_WORKAROUND_CAVIUM_23144) + return -EINVAL; + + cpu = cpumask_first(cpu_online_mask); + } + its_dev->event_map.col_map[event] = cpu; irq_data_update_effective_affinity(d, cpumask_of(cpu)); @@ -3399,6 +3427,16 @@ static int redist_disable_lpis(void) u64 timeout = USEC_PER_SEC; u64 val; + /* + * If coming via a CPU hotplug event, we don't need to disable + * LPIs before trying to re-enable them. They are already + * configured and all is well in the world. Detect this case + * by checking the allocation of the pending table for the + * current CPU. + */ + if (gic_data_rdist()->pend_page) + return 0; + if (!gic_rdists_supports_plpis()) { pr_info("CPU%d: LPIs not supported\n", smp_processor_id()); return -ENXIO; diff --git a/drivers/irqchip/irq-ls-scfg-msi.c b/drivers/irqchip/irq-ls-scfg-msi.c index 1ec3bfe56693..c671b3212010 100644 --- a/drivers/irqchip/irq-ls-scfg-msi.c +++ b/drivers/irqchip/irq-ls-scfg-msi.c @@ -93,8 +93,12 @@ static void ls_scfg_msi_compose_msg(struct irq_data *data, struct msi_msg *msg) msg->address_lo = lower_32_bits(msi_data->msiir_addr); msg->data = data->hwirq; - if (msi_affinity_flag) - msg->data |= cpumask_first(data->common->affinity); + if (msi_affinity_flag) { + const struct cpumask *mask; + + mask = irq_data_get_effective_affinity_mask(data); + msg->data |= cpumask_first(mask); + } iommu_dma_map_msi_msg(data->irq, msg); } @@ -121,7 +125,7 @@ static int ls_scfg_msi_set_affinity(struct irq_data *irq_data, return -EINVAL; } - cpumask_copy(irq_data->common->affinity, mask); + irq_data_update_effective_affinity(irq_data, cpumask_of(cpu)); return IRQ_SET_MASK_OK; } diff --git a/drivers/isdn/mISDN/socket.c b/drivers/isdn/mISDN/socket.c index 98f90aadd141..18c0a1281914 100644 --- a/drivers/isdn/mISDN/socket.c +++ b/drivers/isdn/mISDN/socket.c @@ -588,7 +588,7 @@ static const struct proto_ops data_sock_ops = { .getname = data_sock_getname, .sendmsg = mISDN_sock_sendmsg, .recvmsg = mISDN_sock_recvmsg, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .listen = sock_no_listen, .shutdown = sock_no_shutdown, .setsockopt = data_sock_setsockopt, diff --git a/drivers/lightnvm/Kconfig b/drivers/lightnvm/Kconfig index 10c08982185a..9c03f35d9df1 100644 --- a/drivers/lightnvm/Kconfig +++ b/drivers/lightnvm/Kconfig @@ -4,7 +4,7 @@ menuconfig NVM bool "Open-Channel SSD target support" - depends on BLOCK && HAS_DMA && PCI + depends on BLOCK && PCI select BLK_DEV_NVME help Say Y here to get to enable Open-channel SSDs. diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c index ab13fcec3fca..75df4c9d8b54 100644 --- a/drivers/md/dm-raid.c +++ b/drivers/md/dm-raid.c @@ -588,7 +588,7 @@ static const char *raid10_md_layout_to_format(int layout) } /* Return md raid10 algorithm for @name */ -static const int raid10_name_to_format(const char *name) +static int raid10_name_to_format(const char *name) { if (!strcasecmp(name, "near")) return ALGORITHM_RAID10_NEAR; diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index 938766794c2e..3d0e2c198f06 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -885,9 +885,7 @@ EXPORT_SYMBOL_GPL(dm_table_set_type); static int device_supports_dax(struct dm_target *ti, struct dm_dev *dev, sector_t start, sector_t len, void *data) { - struct request_queue *q = bdev_get_queue(dev->bdev); - - return q && blk_queue_dax(q); + return bdev_dax_supported(dev->bdev, PAGE_SIZE); } static bool dm_table_supports_dax(struct dm_table *t) @@ -1907,6 +1905,9 @@ void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q, if (dm_table_supports_dax(t)) blk_queue_flag_set(QUEUE_FLAG_DAX, q); + else + blk_queue_flag_clear(QUEUE_FLAG_DAX, q); + if (dm_table_supports_dax_write_cache(t)) dax_write_cache(t->md->dax_dev, true); diff --git a/drivers/md/dm-thin-metadata.c b/drivers/md/dm-thin-metadata.c index 36ef284ad086..72142021b5c9 100644 --- a/drivers/md/dm-thin-metadata.c +++ b/drivers/md/dm-thin-metadata.c @@ -776,7 +776,6 @@ static int __write_changed_details(struct dm_pool_metadata *pmd) static int __commit_transaction(struct dm_pool_metadata *pmd) { int r; - size_t metadata_len, data_len; struct thin_disk_superblock *disk_super; struct dm_block *sblock; @@ -797,14 +796,6 @@ static int __commit_transaction(struct dm_pool_metadata *pmd) if (r < 0) return r; - r = dm_sm_root_size(pmd->metadata_sm, &metadata_len); - if (r < 0) - return r; - - r = dm_sm_root_size(pmd->data_sm, &data_len); - if (r < 0) - return r; - r = save_sm_roots(pmd); if (r < 0) return r; diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c index 7945238df1c0..b900723bbd0f 100644 --- a/drivers/md/dm-thin.c +++ b/drivers/md/dm-thin.c @@ -1386,6 +1386,8 @@ static void schedule_external_copy(struct thin_c *tc, dm_block_t virt_block, static void set_pool_mode(struct pool *pool, enum pool_mode new_mode); +static void requeue_bios(struct pool *pool); + static void check_for_space(struct pool *pool) { int r; @@ -1398,8 +1400,10 @@ static void check_for_space(struct pool *pool) if (r) return; - if (nr_free) + if (nr_free) { set_pool_mode(pool, PM_WRITE); + requeue_bios(pool); + } } /* @@ -1476,7 +1480,10 @@ static int alloc_data_block(struct thin_c *tc, dm_block_t *result) r = dm_pool_alloc_data_block(pool->pmd, result); if (r) { - metadata_operation_failed(pool, "dm_pool_alloc_data_block", r); + if (r == -ENOSPC) + set_pool_mode(pool, PM_OUT_OF_DATA_SPACE); + else + metadata_operation_failed(pool, "dm_pool_alloc_data_block", r); return r; } diff --git a/drivers/md/dm-writecache.c b/drivers/md/dm-writecache.c index 5961c7794ef3..07ea6a48aac6 100644 --- a/drivers/md/dm-writecache.c +++ b/drivers/md/dm-writecache.c @@ -259,7 +259,7 @@ static int persistent_memory_claim(struct dm_writecache *wc) if (da != p) { long i; wc->memory_map = NULL; - pages = kvmalloc(p * sizeof(struct page *), GFP_KERNEL); + pages = kvmalloc_array(p, sizeof(struct page *), GFP_KERNEL); if (!pages) { r = -ENOMEM; goto err2; @@ -859,7 +859,7 @@ static int writecache_alloc_entries(struct dm_writecache *wc) if (wc->entries) return 0; - wc->entries = vmalloc(sizeof(struct wc_entry) * wc->n_blocks); + wc->entries = vmalloc(array_size(sizeof(struct wc_entry), wc->n_blocks)); if (!wc->entries) return -ENOMEM; for (b = 0; b < wc->n_blocks; b++) { @@ -1481,9 +1481,9 @@ static void __writecache_writeback_pmem(struct dm_writecache *wc, struct writeba wb->bio.bi_iter.bi_sector = read_original_sector(wc, e); wb->page_offset = PAGE_SIZE; if (max_pages <= WB_LIST_INLINE || - unlikely(!(wb->wc_list = kmalloc(max_pages * sizeof(struct wc_entry *), - GFP_NOIO | __GFP_NORETRY | - __GFP_NOMEMALLOC | __GFP_NOWARN)))) { + unlikely(!(wb->wc_list = kmalloc_array(max_pages, sizeof(struct wc_entry *), + GFP_NOIO | __GFP_NORETRY | + __GFP_NOMEMALLOC | __GFP_NOWARN)))) { wb->wc_list = wb->wc_list_inline; max_pages = WB_LIST_INLINE; } diff --git a/drivers/md/dm-zoned-target.c b/drivers/md/dm-zoned-target.c index 3c0e45f4dcf5..a44183ff4be0 100644 --- a/drivers/md/dm-zoned-target.c +++ b/drivers/md/dm-zoned-target.c @@ -787,7 +787,7 @@ static int dmz_ctr(struct dm_target *ti, unsigned int argc, char **argv) /* Chunk BIO work */ mutex_init(&dmz->chunk_lock); - INIT_RADIX_TREE(&dmz->chunk_rxtree, GFP_KERNEL); + INIT_RADIX_TREE(&dmz->chunk_rxtree, GFP_NOIO); dmz->chunk_wq = alloc_workqueue("dmz_cwq_%s", WQ_MEM_RECLAIM | WQ_UNBOUND, 0, dev->name); if (!dmz->chunk_wq) { diff --git a/drivers/md/dm.c b/drivers/md/dm.c index e65429a29c06..b0dd7027848b 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -1056,8 +1056,7 @@ static long dm_dax_direct_access(struct dax_device *dax_dev, pgoff_t pgoff, if (len < 1) goto out; nr_pages = min(len, nr_pages); - if (ti->type->direct_access) - ret = ti->type->direct_access(ti, pgoff, nr_pages, kaddr, pfn); + ret = ti->type->direct_access(ti, pgoff, nr_pages, kaddr, pfn); out: dm_put_live_table(md, srcu_idx); @@ -1606,10 +1605,9 @@ static blk_qc_t __split_and_process_bio(struct mapped_device *md, * the usage of io->orig_bio in dm_remap_zone_report() * won't be affected by this reassignment. */ - struct bio *b = bio_clone_bioset(bio, GFP_NOIO, - &md->queue->bio_split); + struct bio *b = bio_split(bio, bio_sectors(bio) - ci.sector_count, + GFP_NOIO, &md->queue->bio_split); ci.io->orig_bio = b; - bio_advance(bio, (bio_sectors(bio) - ci.sector_count) << 9); bio_chain(b, bio); ret = generic_make_request(bio); break; diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index a0c655628d6d..1b64ac8c5bc8 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -2526,7 +2526,7 @@ static int cfi_atmel_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) struct ppb_lock { struct flchip *chip; - loff_t offset; + unsigned long adr; int locked; }; @@ -2544,8 +2544,9 @@ static int __maybe_unused do_ppb_xxlock(struct map_info *map, unsigned long timeo; int ret; + adr += chip->start; mutex_lock(&chip->mutex); - ret = get_chip(map, chip, adr + chip->start, FL_LOCKING); + ret = get_chip(map, chip, adr, FL_LOCKING); if (ret) { mutex_unlock(&chip->mutex); return ret; @@ -2563,8 +2564,8 @@ static int __maybe_unused do_ppb_xxlock(struct map_info *map, if (thunk == DO_XXLOCK_ONEBLOCK_LOCK) { chip->state = FL_LOCKING; - map_write(map, CMD(0xA0), chip->start + adr); - map_write(map, CMD(0x00), chip->start + adr); + map_write(map, CMD(0xA0), adr); + map_write(map, CMD(0x00), adr); } else if (thunk == DO_XXLOCK_ONEBLOCK_UNLOCK) { /* * Unlocking of one specific sector is not supported, so we @@ -2602,7 +2603,7 @@ static int __maybe_unused do_ppb_xxlock(struct map_info *map, map_write(map, CMD(0x00), chip->start); chip->state = FL_READY; - put_chip(map, chip, adr + chip->start); + put_chip(map, chip, adr); mutex_unlock(&chip->mutex); return ret; @@ -2659,9 +2660,9 @@ static int __maybe_unused cfi_ppb_unlock(struct mtd_info *mtd, loff_t ofs, * sectors shall be unlocked, so lets keep their locking * status at "unlocked" (locked=0) for the final re-locking. */ - if ((adr < ofs) || (adr >= (ofs + len))) { + if ((offset < ofs) || (offset >= (ofs + len))) { sect[sectors].chip = &cfi->chips[chipnum]; - sect[sectors].offset = offset; + sect[sectors].adr = adr; sect[sectors].locked = do_ppb_xxlock( map, &cfi->chips[chipnum], adr, 0, DO_XXLOCK_ONEBLOCK_GETLOCK); @@ -2675,6 +2676,8 @@ static int __maybe_unused cfi_ppb_unlock(struct mtd_info *mtd, loff_t ofs, i++; if (adr >> cfi->chipshift) { + if (offset >= (ofs + len)) + break; adr = 0; chipnum++; @@ -2705,7 +2708,7 @@ static int __maybe_unused cfi_ppb_unlock(struct mtd_info *mtd, loff_t ofs, */ for (i = 0; i < sectors; i++) { if (sect[i].locked) - do_ppb_xxlock(map, sect[i].chip, sect[i].offset, 0, + do_ppb_xxlock(map, sect[i].chip, sect[i].adr, 0, DO_XXLOCK_ONEBLOCK_LOCK); } diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c index 3a6f450d1093..53febe8a68c3 100644 --- a/drivers/mtd/devices/mtd_dataflash.c +++ b/drivers/mtd/devices/mtd_dataflash.c @@ -733,8 +733,8 @@ static struct flash_info dataflash_data[] = { { "AT45DB642x", 0x1f2800, 8192, 1056, 11, SUP_POW2PS}, { "at45db642d", 0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS}, - { "AT45DB641E", 0x1f28000100, 32768, 264, 9, SUP_EXTID | SUP_POW2PS}, - { "at45db641e", 0x1f28000100, 32768, 256, 8, SUP_EXTID | SUP_POW2PS | IS_POW2PS}, + { "AT45DB641E", 0x1f28000100ULL, 32768, 264, 9, SUP_EXTID | SUP_POW2PS}, + { "at45db641e", 0x1f28000100ULL, 32768, 256, 8, SUP_EXTID | SUP_POW2PS | IS_POW2PS}, }; static struct flash_info *jedec_lookup(struct spi_device *spi, diff --git a/drivers/mtd/nand/raw/denali_dt.c b/drivers/mtd/nand/raw/denali_dt.c index cfd33e6ca77f..5869e90cc14b 100644 --- a/drivers/mtd/nand/raw/denali_dt.c +++ b/drivers/mtd/nand/raw/denali_dt.c @@ -123,7 +123,11 @@ static int denali_dt_probe(struct platform_device *pdev) if (ret) return ret; - denali->clk_x_rate = clk_get_rate(dt->clk); + /* + * Hardcode the clock rate for the backward compatibility. + * This works for both SOCFPGA and UniPhier. + */ + denali->clk_x_rate = 200000000; ret = denali_init(denali); if (ret) diff --git a/drivers/mtd/nand/raw/mxc_nand.c b/drivers/mtd/nand/raw/mxc_nand.c index 45786e707b7b..26cef218bb43 100644 --- a/drivers/mtd/nand/raw/mxc_nand.c +++ b/drivers/mtd/nand/raw/mxc_nand.c @@ -48,7 +48,7 @@ #define NFC_V1_V2_CONFIG (host->regs + 0x0a) #define NFC_V1_V2_ECC_STATUS_RESULT (host->regs + 0x0c) #define NFC_V1_V2_RSLTMAIN_AREA (host->regs + 0x0e) -#define NFC_V1_V2_RSLTSPARE_AREA (host->regs + 0x10) +#define NFC_V21_RSLTSPARE_AREA (host->regs + 0x10) #define NFC_V1_V2_WRPROT (host->regs + 0x12) #define NFC_V1_UNLOCKSTART_BLKADDR (host->regs + 0x14) #define NFC_V1_UNLOCKEND_BLKADDR (host->regs + 0x16) @@ -1274,6 +1274,9 @@ static void preset_v2(struct mtd_info *mtd) writew(config1, NFC_V1_V2_CONFIG1); /* preset operation */ + /* spare area size in 16-bit half-words */ + writew(mtd->oobsize / 2, NFC_V21_RSLTSPARE_AREA); + /* Unlock the internal RAM Buffer */ writew(0x2, NFC_V1_V2_CONFIG); diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c index 10c4f9919850..b01d15ec4c56 100644 --- a/drivers/mtd/nand/raw/nand_base.c +++ b/drivers/mtd/nand/raw/nand_base.c @@ -440,7 +440,7 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs) for (; page < page_end; page++) { res = chip->ecc.read_oob(mtd, chip, page); - if (res) + if (res < 0) return res; bad = chip->oob_poi[chip->badblockpos]; diff --git a/drivers/mtd/nand/raw/nand_macronix.c b/drivers/mtd/nand/raw/nand_macronix.c index 7ed1f87e742a..49c546c97c6f 100644 --- a/drivers/mtd/nand/raw/nand_macronix.c +++ b/drivers/mtd/nand/raw/nand_macronix.c @@ -17,23 +17,47 @@ #include <linux/mtd/rawnand.h> +/* + * Macronix AC series does not support using SET/GET_FEATURES to change + * the timings unlike what is declared in the parameter page. Unflag + * this feature to avoid unnecessary downturns. + */ +static void macronix_nand_fix_broken_get_timings(struct nand_chip *chip) +{ + unsigned int i; + static const char * const broken_get_timings[] = { + "MX30LF1G18AC", + "MX30LF1G28AC", + "MX30LF2G18AC", + "MX30LF2G28AC", + "MX30LF4G18AC", + "MX30LF4G28AC", + "MX60LF8G18AC", + }; + + if (!chip->parameters.supports_set_get_features) + return; + + for (i = 0; i < ARRAY_SIZE(broken_get_timings); i++) { + if (!strcmp(broken_get_timings[i], chip->parameters.model)) + break; + } + + if (i == ARRAY_SIZE(broken_get_timings)) + return; + + bitmap_clear(chip->parameters.get_feature_list, + ONFI_FEATURE_ADDR_TIMING_MODE, 1); + bitmap_clear(chip->parameters.set_feature_list, + ONFI_FEATURE_ADDR_TIMING_MODE, 1); +} + static int macronix_nand_init(struct nand_chip *chip) { if (nand_is_slc(chip)) chip->bbt_options |= NAND_BBT_SCAN2NDPAGE; - /* - * MX30LF2G18AC chip does not support using SET/GET_FEATURES to change - * the timings unlike what is declared in the parameter page. Unflag - * this feature to avoid unnecessary downturns. - */ - if (chip->parameters.supports_set_get_features && - !strcmp("MX30LF2G18AC", chip->parameters.model)) { - bitmap_clear(chip->parameters.get_feature_list, - ONFI_FEATURE_ADDR_TIMING_MODE, 1); - bitmap_clear(chip->parameters.set_feature_list, - ONFI_FEATURE_ADDR_TIMING_MODE, 1); - } + macronix_nand_fix_broken_get_timings(chip); return 0; } diff --git a/drivers/mtd/nand/raw/nand_micron.c b/drivers/mtd/nand/raw/nand_micron.c index 0af45b134c0c..5ec4c90a637d 100644 --- a/drivers/mtd/nand/raw/nand_micron.c +++ b/drivers/mtd/nand/raw/nand_micron.c @@ -66,7 +66,9 @@ static int micron_nand_onfi_init(struct nand_chip *chip) if (p->supports_set_get_features) { set_bit(ONFI_FEATURE_ADDR_READ_RETRY, p->set_feature_list); + set_bit(ONFI_FEATURE_ON_DIE_ECC, p->set_feature_list); set_bit(ONFI_FEATURE_ADDR_READ_RETRY, p->get_feature_list); + set_bit(ONFI_FEATURE_ON_DIE_ECC, p->get_feature_list); } return 0; diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig index d5c15e8bb3de..f273af136fc7 100644 --- a/drivers/net/ethernet/amd/Kconfig +++ b/drivers/net/ethernet/amd/Kconfig @@ -173,7 +173,7 @@ config SUNLANCE config AMD_XGBE tristate "AMD 10GbE Ethernet driver" - depends on ((OF_NET && OF_ADDRESS) || ACPI || PCI) && HAS_IOMEM && HAS_DMA + depends on ((OF_NET && OF_ADDRESS) || ACPI || PCI) && HAS_IOMEM depends on X86 || ARM64 || COMPILE_TEST select BITREVERSE select CRC32 diff --git a/drivers/net/ethernet/apm/xgene-v2/Kconfig b/drivers/net/ethernet/apm/xgene-v2/Kconfig index 1205861b6318..eedd3f3dd22e 100644 --- a/drivers/net/ethernet/apm/xgene-v2/Kconfig +++ b/drivers/net/ethernet/apm/xgene-v2/Kconfig @@ -1,6 +1,5 @@ config NET_XGENE_V2 tristate "APM X-Gene SoC Ethernet-v2 Driver" - depends on HAS_DMA depends on ARCH_XGENE || COMPILE_TEST help This is the Ethernet driver for the on-chip ethernet interface diff --git a/drivers/net/ethernet/apm/xgene/Kconfig b/drivers/net/ethernet/apm/xgene/Kconfig index afccb033177b..e4e33c900b57 100644 --- a/drivers/net/ethernet/apm/xgene/Kconfig +++ b/drivers/net/ethernet/apm/xgene/Kconfig @@ -1,6 +1,5 @@ config NET_XGENE tristate "APM X-Gene SoC Ethernet Driver" - depends on HAS_DMA depends on ARCH_XGENE || COMPILE_TEST select PHYLIB select MDIO_XGENE diff --git a/drivers/net/ethernet/arc/Kconfig b/drivers/net/ethernet/arc/Kconfig index e743ddf46343..5d0ab8e74b68 100644 --- a/drivers/net/ethernet/arc/Kconfig +++ b/drivers/net/ethernet/arc/Kconfig @@ -24,7 +24,8 @@ config ARC_EMAC_CORE config ARC_EMAC tristate "ARC EMAC support" select ARC_EMAC_CORE - depends on OF_IRQ && OF_NET && HAS_DMA && (ARC || COMPILE_TEST) + depends on OF_IRQ && OF_NET + depends on ARC || COMPILE_TEST ---help--- On some legacy ARC (Synopsys) FPGA boards such as ARCAngel4/ML50x non-standard on-chip ethernet device ARC EMAC 10/100 is used. @@ -33,7 +34,8 @@ config ARC_EMAC config EMAC_ROCKCHIP tristate "Rockchip EMAC support" select ARC_EMAC_CORE - depends on OF_IRQ && OF_NET && REGULATOR && HAS_DMA && (ARCH_ROCKCHIP || COMPILE_TEST) + depends on OF_IRQ && OF_NET && REGULATOR + depends on ARCH_ROCKCHIP || COMPILE_TEST ---help--- Support for Rockchip RK3036/RK3066/RK3188 EMAC ethernet controllers. This selects Rockchip SoC glue layer support for the diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig index af75156919ed..4c3bfde6e8de 100644 --- a/drivers/net/ethernet/broadcom/Kconfig +++ b/drivers/net/ethernet/broadcom/Kconfig @@ -157,7 +157,6 @@ config BGMAC config BGMAC_BCMA tristate "Broadcom iProc GBit BCMA support" depends on BCMA && BCMA_HOST_SOC - depends on HAS_DMA depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST select BGMAC select PHYLIB @@ -170,7 +169,6 @@ config BGMAC_BCMA config BGMAC_PLATFORM tristate "Broadcom iProc GBit platform support" - depends on HAS_DMA depends on ARCH_BCM_IPROC || COMPILE_TEST depends on OF select BGMAC diff --git a/drivers/net/ethernet/cadence/macb_ptp.c b/drivers/net/ethernet/cadence/macb_ptp.c index 2220c771092b..678835136bf8 100644 --- a/drivers/net/ethernet/cadence/macb_ptp.c +++ b/drivers/net/ethernet/cadence/macb_ptp.c @@ -170,10 +170,7 @@ static int gem_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta) if (delta > TSU_NSEC_MAX_VAL) { gem_tsu_get_time(&bp->ptp_clock_info, &now); - if (sign) - now = timespec64_sub(now, then); - else - now = timespec64_add(now, then); + now = timespec64_add(now, then); gem_tsu_set_time(&bp->ptp_clock_info, (const struct timespec64 *)&now); diff --git a/drivers/net/ethernet/calxeda/Kconfig b/drivers/net/ethernet/calxeda/Kconfig index 07d2201530d2..9fdd496b90ff 100644 --- a/drivers/net/ethernet/calxeda/Kconfig +++ b/drivers/net/ethernet/calxeda/Kconfig @@ -1,6 +1,6 @@ config NET_CALXEDA_XGMAC tristate "Calxeda 1G/10G XGMAC Ethernet driver" - depends on HAS_IOMEM && HAS_DMA + depends on HAS_IOMEM depends on ARCH_HIGHBANK || COMPILE_TEST select CRC32 help diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index dd04a2f89ce6..bc03c175a3cd 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -263,7 +263,7 @@ static void dcb_tx_queue_prio_enable(struct net_device *dev, int enable) "Can't %s DCB Priority on port %d, TX Queue %d: err=%d\n", enable ? "set" : "unset", pi->port_id, i, -err); else - txq->dcb_prio = value; + txq->dcb_prio = enable ? value : 0; } } diff --git a/drivers/net/ethernet/cisco/enic/enic_clsf.c b/drivers/net/ethernet/cisco/enic/enic_clsf.c index 973c1fb70d09..99038dfc7fbe 100644 --- a/drivers/net/ethernet/cisco/enic/enic_clsf.c +++ b/drivers/net/ethernet/cisco/enic/enic_clsf.c @@ -79,7 +79,6 @@ void enic_rfs_flw_tbl_init(struct enic *enic) enic->rfs_h.max = enic->config.num_arfs; enic->rfs_h.free = enic->rfs_h.max; enic->rfs_h.toclean = 0; - enic_rfs_timer_start(enic); } void enic_rfs_flw_tbl_free(struct enic *enic) @@ -88,7 +87,6 @@ void enic_rfs_flw_tbl_free(struct enic *enic) enic_rfs_timer_stop(enic); spin_lock_bh(&enic->rfs_h.lock); - enic->rfs_h.free = 0; for (i = 0; i < (1 << ENIC_RFS_FLW_BITSHIFT); i++) { struct hlist_head *hhead; struct hlist_node *tmp; @@ -99,6 +97,7 @@ void enic_rfs_flw_tbl_free(struct enic *enic) enic_delfltr(enic, n->fltr_id); hlist_del(&n->node); kfree(n); + enic->rfs_h.free++; } } spin_unlock_bh(&enic->rfs_h.lock); diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c index 30d2eaa18c04..90c645b8538e 100644 --- a/drivers/net/ethernet/cisco/enic/enic_main.c +++ b/drivers/net/ethernet/cisco/enic/enic_main.c @@ -1920,7 +1920,7 @@ static int enic_open(struct net_device *netdev) { struct enic *enic = netdev_priv(netdev); unsigned int i; - int err; + int err, ret; err = enic_request_intr(enic); if (err) { @@ -1971,16 +1971,15 @@ static int enic_open(struct net_device *netdev) vnic_intr_unmask(&enic->intr[i]); enic_notify_timer_start(enic); - enic_rfs_flw_tbl_init(enic); + enic_rfs_timer_start(enic); return 0; err_out_free_rq: for (i = 0; i < enic->rq_count; i++) { - err = vnic_rq_disable(&enic->rq[i]); - if (err) - return err; - vnic_rq_clean(&enic->rq[i], enic_free_rq_buf); + ret = vnic_rq_disable(&enic->rq[i]); + if (!ret) + vnic_rq_clean(&enic->rq[i], enic_free_rq_buf); } enic_dev_notify_unset(enic); err_out_free_intr: @@ -2904,6 +2903,7 @@ static int enic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) timer_setup(&enic->notify_timer, enic_notify_timer, 0); + enic_rfs_flw_tbl_init(enic); enic_set_rx_coal_setting(enic); INIT_WORK(&enic->reset, enic_reset); INIT_WORK(&enic->tx_hang_reset, enic_tx_hang_reset); diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c index 78db8e62a83f..ed6c76d20b45 100644 --- a/drivers/net/ethernet/faraday/ftgmac100.c +++ b/drivers/net/ethernet/faraday/ftgmac100.c @@ -1735,8 +1735,8 @@ static void ftgmac100_ncsi_handler(struct ncsi_dev *nd) if (unlikely(nd->state != ncsi_dev_state_functional)) return; - netdev_info(nd->dev, "NCSI interface %s\n", - nd->link_up ? "up" : "down"); + netdev_dbg(nd->dev, "NCSI interface %s\n", + nd->link_up ? "up" : "down"); } static void ftgmac100_setup_clk(struct ftgmac100 *priv) diff --git a/drivers/net/ethernet/hisilicon/Kconfig b/drivers/net/ethernet/hisilicon/Kconfig index 8bcf470ff5f3..fb1a7251f45d 100644 --- a/drivers/net/ethernet/hisilicon/Kconfig +++ b/drivers/net/ethernet/hisilicon/Kconfig @@ -5,7 +5,7 @@ config NET_VENDOR_HISILICON bool "Hisilicon devices" default y - depends on (OF || ACPI) && HAS_DMA + depends on OF || ACPI depends on ARM || ARM64 || COMPILE_TEST ---help--- If you have a network (Ethernet) card belonging to this class, say Y. diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c index 8ffb7454e67c..ed6dbcfd4e96 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -2103,9 +2103,8 @@ static struct sk_buff *i40e_build_skb(struct i40e_ring *rx_ring, unsigned int truesize = i40e_rx_pg_size(rx_ring) / 2; #else unsigned int truesize = SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) + - SKB_DATA_ALIGN(I40E_SKB_PAD + - (xdp->data_end - - xdp->data_hard_start)); + SKB_DATA_ALIGN(xdp->data_end - + xdp->data_hard_start); #endif struct sk_buff *skb; @@ -2124,7 +2123,7 @@ static struct sk_buff *i40e_build_skb(struct i40e_ring *rx_ring, return NULL; /* update pointers within the skb to store the data */ - skb_reserve(skb, I40E_SKB_PAD + (xdp->data - xdp->data_hard_start)); + skb_reserve(skb, xdp->data - xdp->data_hard_start); __skb_put(skb, xdp->data_end - xdp->data); if (metasize) skb_metadata_set(skb, metasize); diff --git a/drivers/net/ethernet/marvell/Kconfig b/drivers/net/ethernet/marvell/Kconfig index cc2f7701e71e..f33fd22b351c 100644 --- a/drivers/net/ethernet/marvell/Kconfig +++ b/drivers/net/ethernet/marvell/Kconfig @@ -18,8 +18,8 @@ if NET_VENDOR_MARVELL config MV643XX_ETH tristate "Marvell Discovery (643XX) and Orion ethernet support" - depends on (MV64X60 || PPC32 || PLAT_ORION || COMPILE_TEST) && INET - depends on HAS_DMA + depends on MV64X60 || PPC32 || PLAT_ORION || COMPILE_TEST + depends on INET select PHYLIB select MVMDIO ---help--- @@ -58,7 +58,6 @@ config MVNETA_BM_ENABLE config MVNETA tristate "Marvell Armada 370/38x/XP/37xx network interface support" depends on ARCH_MVEBU || COMPILE_TEST - depends on HAS_DMA select MVMDIO select PHYLINK ---help--- @@ -84,7 +83,6 @@ config MVNETA_BM config MVPP2 tristate "Marvell Armada 375/7K/8K network interface support" depends on ARCH_MVEBU || COMPILE_TEST - depends on HAS_DMA select MVMDIO select PHYLINK ---help--- @@ -93,7 +91,7 @@ config MVPP2 config PXA168_ETH tristate "Marvell pxa168 ethernet support" - depends on HAS_IOMEM && HAS_DMA + depends on HAS_IOMEM depends on CPU_PXA168 || ARCH_BERLIN || COMPILE_TEST select PHYLIB ---help--- diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 17a904cc6a5e..0ad2f3f7da85 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -1932,7 +1932,7 @@ static int mvneta_rx_swbm(struct mvneta_port *pp, int rx_todo, rx_bytes = rx_desc->data_size - (ETH_FCS_LEN + MVNETA_MH_SIZE); index = rx_desc - rxq->descs; data = rxq->buf_virt_addr[index]; - phys_addr = rx_desc->buf_phys_addr; + phys_addr = rx_desc->buf_phys_addr - pp->rx_offset_correction; if (!mvneta_rxq_desc_is_first_last(rx_status) || (rx_status & MVNETA_RXD_ERR_SUMMARY)) { diff --git a/drivers/net/ethernet/mellanox/mlxsw/Kconfig b/drivers/net/ethernet/mellanox/mlxsw/Kconfig index f4d9c9975ac3..82827a8d3d67 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/Kconfig +++ b/drivers/net/ethernet/mellanox/mlxsw/Kconfig @@ -30,7 +30,7 @@ config MLXSW_CORE_THERMAL config MLXSW_PCI tristate "PCI bus implementation for Mellanox Technologies Switch ASICs" - depends on PCI && HAS_DMA && HAS_IOMEM && MLXSW_CORE + depends on PCI && HAS_IOMEM && MLXSW_CORE default m ---help--- This is PCI bus implementation for Mellanox Technologies Switch ASICs. diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c index fb2c8f8071e6..776a8a9be8e3 100644 --- a/drivers/net/ethernet/mscc/ocelot.c +++ b/drivers/net/ethernet/mscc/ocelot.c @@ -344,10 +344,9 @@ static int ocelot_port_stop(struct net_device *dev) static int ocelot_gen_ifh(u32 *ifh, struct frame_info *info) { ifh[0] = IFH_INJ_BYPASS; - ifh[1] = (0xff00 & info->port) >> 8; + ifh[1] = (0xf00 & info->port) >> 8; ifh[2] = (0xff & info->port) << 24; - ifh[3] = IFH_INJ_POP_CNT_DISABLE | (info->cpuq << 20) | - (info->tag_type << 16) | info->vid; + ifh[3] = (info->tag_type << 16) | info->vid; return 0; } @@ -370,11 +369,13 @@ static int ocelot_port_xmit(struct sk_buff *skb, struct net_device *dev) QS_INJ_CTRL_SOF, QS_INJ_CTRL, grp); info.port = BIT(port->chip_port); - info.cpuq = 0xff; + info.tag_type = IFH_TAG_TYPE_C; + info.vid = skb_vlan_tag_get(skb); ocelot_gen_ifh(ifh, &info); for (i = 0; i < IFH_LEN; i++) - ocelot_write_rix(ocelot, ifh[i], QS_INJ_WR, grp); + ocelot_write_rix(ocelot, (__force u32)cpu_to_be32(ifh[i]), + QS_INJ_WR, grp); count = (skb->len + 3) / 4; last = skb->len % 4; diff --git a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c index 8f31406ec894..f0b01385d5cb 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c @@ -255,9 +255,8 @@ qed_dcbx_get_app_protocol_type(struct qed_hwfn *p_hwfn, *type = DCBX_PROTOCOL_ROCE_V2; } else { *type = DCBX_MAX_PROTOCOL_TYPE; - DP_ERR(p_hwfn, - "No action required, App TLV id = 0x%x app_prio_bitmap = 0x%x\n", - id, app_prio_bitmap); + DP_ERR(p_hwfn, "No action required, App TLV entry = 0x%x\n", + app_prio_bitmap); return false; } @@ -1479,8 +1478,8 @@ static u8 qed_dcbnl_getcap(struct qed_dev *cdev, int capid, u8 *cap) *cap = 0x80; break; case DCB_CAP_ATTR_DCBX: - *cap = (DCB_CAP_DCBX_LLD_MANAGED | DCB_CAP_DCBX_VER_CEE | - DCB_CAP_DCBX_VER_IEEE | DCB_CAP_DCBX_STATIC); + *cap = (DCB_CAP_DCBX_VER_CEE | DCB_CAP_DCBX_VER_IEEE | + DCB_CAP_DCBX_STATIC); break; default: *cap = false; @@ -1548,8 +1547,6 @@ static u8 qed_dcbnl_getdcbx(struct qed_dev *cdev) if (!dcbx_info) return 0; - if (dcbx_info->operational.enabled) - mode |= DCB_CAP_DCBX_LLD_MANAGED; if (dcbx_info->operational.ieee) mode |= DCB_CAP_DCBX_VER_IEEE; if (dcbx_info->operational.cee) diff --git a/drivers/net/ethernet/qlogic/qed/qed_ll2.c b/drivers/net/ethernet/qlogic/qed/qed_ll2.c index c97ebd681c47..012973d75ad0 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_ll2.c +++ b/drivers/net/ethernet/qlogic/qed/qed_ll2.c @@ -201,8 +201,9 @@ void qed_ll2b_complete_rx_packet(void *cxt, struct qed_ll2_comp_rx_data *data) skb = build_skb(buffer->data, 0); if (!skb) { - rc = -ENOMEM; - goto out_post; + DP_INFO(cdev, "Failed to build SKB\n"); + kfree(buffer->data); + goto out_post1; } data->u.placement_offset += NET_SKB_PAD; @@ -224,8 +225,14 @@ void qed_ll2b_complete_rx_packet(void *cxt, struct qed_ll2_comp_rx_data *data) cdev->ll2->cbs->rx_cb(cdev->ll2->cb_cookie, skb, data->opaque_data_0, data->opaque_data_1); + } else { + DP_VERBOSE(p_hwfn, (NETIF_MSG_RX_STATUS | NETIF_MSG_PKTDATA | + QED_MSG_LL2 | QED_MSG_STORAGE), + "Dropping the packet\n"); + kfree(buffer->data); } +out_post1: /* Update Buffer information and update FW producer */ buffer->data = new_data; buffer->phys_addr = new_phys_addr; diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c index b04d57ca5176..5c10fd7210c3 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_main.c +++ b/drivers/net/ethernet/qlogic/qed/qed_main.c @@ -567,8 +567,16 @@ static irqreturn_t qed_single_int(int irq, void *dev_instance) /* Fastpath interrupts */ for (j = 0; j < 64; j++) { if ((0x2ULL << j) & status) { - hwfn->simd_proto_handler[j].func( - hwfn->simd_proto_handler[j].token); + struct qed_simd_fp_handler *p_handler = + &hwfn->simd_proto_handler[j]; + + if (p_handler->func) + p_handler->func(p_handler->token); + else + DP_NOTICE(hwfn, + "Not calling fastpath handler as it is NULL [handler #%d, status 0x%llx]\n", + j, status); + status &= ~(0x2ULL << j); rc = IRQ_HANDLED; } diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 75dfac0248f4..f4cae2be0fda 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -7148,7 +7148,7 @@ static void rtl8169_netpoll(struct net_device *dev) { struct rtl8169_private *tp = netdev_priv(dev); - rtl8169_interrupt(pci_irq_vector(tp->pci_dev, 0), dev); + rtl8169_interrupt(pci_irq_vector(tp->pci_dev, 0), tp); } #endif diff --git a/drivers/net/ethernet/renesas/Kconfig b/drivers/net/ethernet/renesas/Kconfig index 27be51f0a421..f3f7477043ce 100644 --- a/drivers/net/ethernet/renesas/Kconfig +++ b/drivers/net/ethernet/renesas/Kconfig @@ -17,7 +17,6 @@ if NET_VENDOR_RENESAS config SH_ETH tristate "Renesas SuperH Ethernet support" - depends on HAS_DMA depends on ARCH_RENESAS || SUPERH || COMPILE_TEST select CRC32 select MII @@ -31,7 +30,6 @@ config SH_ETH config RAVB tristate "Renesas Ethernet AVB support" - depends on HAS_DMA depends on ARCH_RENESAS || COMPILE_TEST select CRC32 select MII diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c index ad4a354ce570..570ec72266f3 100644 --- a/drivers/net/ethernet/sfc/efx.c +++ b/drivers/net/ethernet/sfc/efx.c @@ -3180,6 +3180,7 @@ bool efx_rps_check_rule(struct efx_arfs_rule *rule, unsigned int filter_idx, return true; } +static struct hlist_head *efx_rps_hash_bucket(struct efx_nic *efx, const struct efx_filter_spec *spec) { diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig index cb5b0f58c395..edf20361ea5f 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig @@ -111,7 +111,7 @@ config DWMAC_ROCKCHIP config DWMAC_SOCFPGA tristate "SOCFPGA dwmac support" default ARCH_SOCFPGA - depends on OF && (ARCH_SOCFPGA || COMPILE_TEST) + depends on OF && (ARCH_SOCFPGA || ARCH_STRATIX10 || COMPILE_TEST) select MFD_SYSCON help Support for ethernet controller on Altera SOCFPGA diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c index 6e359572b9f0..5b3b06a0a3bf 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c @@ -55,6 +55,7 @@ struct socfpga_dwmac { struct device *dev; struct regmap *sys_mgr_base_addr; struct reset_control *stmmac_rst; + struct reset_control *stmmac_ocp_rst; void __iomem *splitter_base; bool f2h_ptp_ref_clk; struct tse_pcs pcs; @@ -262,8 +263,8 @@ static int socfpga_dwmac_set_phy_mode(struct socfpga_dwmac *dwmac) val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII; /* Assert reset to the enet controller before changing the phy mode */ - if (dwmac->stmmac_rst) - reset_control_assert(dwmac->stmmac_rst); + reset_control_assert(dwmac->stmmac_ocp_rst); + reset_control_assert(dwmac->stmmac_rst); regmap_read(sys_mgr_base_addr, reg_offset, &ctrl); ctrl &= ~(SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << reg_shift); @@ -288,8 +289,8 @@ static int socfpga_dwmac_set_phy_mode(struct socfpga_dwmac *dwmac) /* Deassert reset for the phy configuration to be sampled by * the enet controller, and operation to start in requested mode */ - if (dwmac->stmmac_rst) - reset_control_deassert(dwmac->stmmac_rst); + reset_control_deassert(dwmac->stmmac_ocp_rst); + reset_control_deassert(dwmac->stmmac_rst); if (phymode == PHY_INTERFACE_MODE_SGMII) { if (tse_pcs_init(dwmac->pcs.tse_pcs_base, &dwmac->pcs) != 0) { dev_err(dwmac->dev, "Unable to initialize TSE PCS"); @@ -324,6 +325,15 @@ static int socfpga_dwmac_probe(struct platform_device *pdev) goto err_remove_config_dt; } + dwmac->stmmac_ocp_rst = devm_reset_control_get_optional(dev, "stmmaceth-ocp"); + if (IS_ERR(dwmac->stmmac_ocp_rst)) { + ret = PTR_ERR(dwmac->stmmac_ocp_rst); + dev_err(dev, "error getting reset control of ocp %d\n", ret); + goto err_remove_config_dt; + } + + reset_control_deassert(dwmac->stmmac_ocp_rst); + ret = socfpga_dwmac_parse_data(dwmac, dev); if (ret) { dev_err(dev, "Unable to parse OF data\n"); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index e79b0d7b388a..cba46b62a1cd 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -928,6 +928,7 @@ static void stmmac_check_pcs_mode(struct stmmac_priv *priv) static int stmmac_init_phy(struct net_device *dev) { struct stmmac_priv *priv = netdev_priv(dev); + u32 tx_cnt = priv->plat->tx_queues_to_use; struct phy_device *phydev; char phy_id_fmt[MII_BUS_ID_SIZE + 3]; char bus_id[MII_BUS_ID_SIZE]; @@ -969,6 +970,15 @@ static int stmmac_init_phy(struct net_device *dev) SUPPORTED_1000baseT_Full); /* + * Half-duplex mode not supported with multiqueue + * half-duplex can only works with single queue + */ + if (tx_cnt > 1) + phydev->supported &= ~(SUPPORTED_1000baseT_Half | + SUPPORTED_100baseT_Half | + SUPPORTED_10baseT_Half); + + /* * Broken HW is sometimes missing the pull-up resistor on the * MDIO line, which results in reads to non-existent devices returning * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent diff --git a/drivers/net/ethernet/sun/sungem.c b/drivers/net/ethernet/sun/sungem.c index 7a16d40a72d1..b9221fc1674d 100644 --- a/drivers/net/ethernet/sun/sungem.c +++ b/drivers/net/ethernet/sun/sungem.c @@ -60,8 +60,7 @@ #include <linux/sungem_phy.h> #include "sungem.h" -/* Stripping FCS is causing problems, disabled for now */ -#undef STRIP_FCS +#define STRIP_FCS #define DEFAULT_MSG (NETIF_MSG_DRV | \ NETIF_MSG_PROBE | \ @@ -435,7 +434,7 @@ static int gem_rxmac_reset(struct gem *gp) writel(desc_dma & 0xffffffff, gp->regs + RXDMA_DBLOW); writel(RX_RING_SIZE - 4, gp->regs + RXDMA_KICK); val = (RXDMA_CFG_BASE | (RX_OFFSET << 10) | - ((14 / 2) << 13) | RXDMA_CFG_FTHRESH_128); + (ETH_HLEN << 13) | RXDMA_CFG_FTHRESH_128); writel(val, gp->regs + RXDMA_CFG); if (readl(gp->regs + GREG_BIFCFG) & GREG_BIFCFG_M66EN) writel(((5 & RXDMA_BLANK_IPKTS) | @@ -760,7 +759,6 @@ static int gem_rx(struct gem *gp, int work_to_do) struct net_device *dev = gp->dev; int entry, drops, work_done = 0; u32 done; - __sum16 csum; if (netif_msg_rx_status(gp)) printk(KERN_DEBUG "%s: rx interrupt, done: %d, rx_new: %d\n", @@ -855,9 +853,13 @@ static int gem_rx(struct gem *gp, int work_to_do) skb = copy_skb; } - csum = (__force __sum16)htons((status & RXDCTRL_TCPCSUM) ^ 0xffff); - skb->csum = csum_unfold(csum); - skb->ip_summed = CHECKSUM_COMPLETE; + if (likely(dev->features & NETIF_F_RXCSUM)) { + __sum16 csum; + + csum = (__force __sum16)htons((status & RXDCTRL_TCPCSUM) ^ 0xffff); + skb->csum = csum_unfold(csum); + skb->ip_summed = CHECKSUM_COMPLETE; + } skb->protocol = eth_type_trans(skb, gp->dev); napi_gro_receive(&gp->napi, skb); @@ -1761,7 +1763,7 @@ static void gem_init_dma(struct gem *gp) writel(0, gp->regs + TXDMA_KICK); val = (RXDMA_CFG_BASE | (RX_OFFSET << 10) | - ((14 / 2) << 13) | RXDMA_CFG_FTHRESH_128); + (ETH_HLEN << 13) | RXDMA_CFG_FTHRESH_128); writel(val, gp->regs + RXDMA_CFG); writel(desc_dma >> 32, gp->regs + RXDMA_DBHI); @@ -2985,8 +2987,8 @@ static int gem_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) pci_set_drvdata(pdev, dev); /* We can do scatter/gather and HW checksum */ - dev->hw_features = NETIF_F_SG | NETIF_F_HW_CSUM; - dev->features |= dev->hw_features | NETIF_F_RXCSUM; + dev->hw_features = NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_RXCSUM; + dev->features = dev->hw_features; if (pci_using_dac) dev->features |= NETIF_F_HIGHDMA; diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c index cdbddf16dd29..4f1267477aa4 100644 --- a/drivers/net/ethernet/ti/davinci_cpdma.c +++ b/drivers/net/ethernet/ti/davinci_cpdma.c @@ -205,7 +205,7 @@ static void cpdma_desc_pool_destroy(struct cpdma_ctlr *ctlr) * devices (e.g. cpsw switches) use plain old memory. Descriptor pools * abstract out these details */ -int cpdma_desc_pool_create(struct cpdma_ctlr *ctlr) +static int cpdma_desc_pool_create(struct cpdma_ctlr *ctlr) { struct cpdma_params *cpdma_params = &ctlr->params; struct cpdma_desc_pool *pool; diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c index 06d7c9e4dcda..f270beebb428 100644 --- a/drivers/net/ethernet/ti/davinci_emac.c +++ b/drivers/net/ethernet/ti/davinci_emac.c @@ -1385,6 +1385,15 @@ static int emac_devioctl(struct net_device *ndev, struct ifreq *ifrq, int cmd) return -EOPNOTSUPP; } +static int match_first_device(struct device *dev, void *data) +{ + if (dev->parent && dev->parent->of_node) + return of_device_is_compatible(dev->parent->of_node, + "ti,davinci_mdio"); + + return !strncmp(dev_name(dev), "davinci_mdio", 12); +} + /** * emac_dev_open - EMAC device open * @ndev: The DaVinci EMAC network adapter @@ -1484,8 +1493,14 @@ static int emac_dev_open(struct net_device *ndev) /* use the first phy on the bus if pdata did not give us a phy id */ if (!phydev && !priv->phy_id) { - phy = bus_find_device_by_name(&mdio_bus_type, NULL, - "davinci_mdio"); + /* NOTE: we can't use bus_find_device_by_name() here because + * the device name is not guaranteed to be 'davinci_mdio'. On + * some systems it can be 'davinci_mdio.0' so we need to use + * strncmp() against the first part of the string to correctly + * match it. + */ + phy = bus_find_device(&mdio_bus_type, NULL, NULL, + match_first_device); if (phy) { priv->phy_id = dev_name(phy); if (!priv->phy_id || !*priv->phy_id) diff --git a/drivers/net/hamradio/bpqether.c b/drivers/net/hamradio/bpqether.c index f347fd9c5b28..777fa59f5e0c 100644 --- a/drivers/net/hamradio/bpqether.c +++ b/drivers/net/hamradio/bpqether.c @@ -89,10 +89,6 @@ static const char banner[] __initconst = KERN_INFO \ "AX.25: bpqether driver version 004\n"; -static char bcast_addr[6]={0xFF,0xFF,0xFF,0xFF,0xFF,0xFF}; - -static char bpq_eth_addr[6]; - static int bpq_rcv(struct sk_buff *, struct net_device *, struct packet_type *, struct net_device *); static int bpq_device_event(struct notifier_block *, unsigned long, void *); @@ -501,8 +497,8 @@ static int bpq_new_device(struct net_device *edev) bpq->ethdev = edev; bpq->axdev = ndev; - memcpy(bpq->dest_addr, bcast_addr, sizeof(bpq_eth_addr)); - memcpy(bpq->acpt_addr, bcast_addr, sizeof(bpq_eth_addr)); + eth_broadcast_addr(bpq->dest_addr); + eth_broadcast_addr(bpq->acpt_addr); err = register_netdevice(ndev); if (err) diff --git a/drivers/net/ipvlan/ipvlan_main.c b/drivers/net/ipvlan/ipvlan_main.c index 4377c26f714d..23c1d6600241 100644 --- a/drivers/net/ipvlan/ipvlan_main.c +++ b/drivers/net/ipvlan/ipvlan_main.c @@ -594,7 +594,8 @@ int ipvlan_link_new(struct net *src_net, struct net_device *dev, ipvlan->phy_dev = phy_dev; ipvlan->dev = dev; ipvlan->sfeatures = IPVLAN_FEATURES; - ipvlan_adjust_mtu(ipvlan, phy_dev); + if (!tb[IFLA_MTU]) + ipvlan_adjust_mtu(ipvlan, phy_dev); INIT_LIST_HEAD(&ipvlan->addrs); spin_lock_init(&ipvlan->addrs_lock); @@ -693,6 +694,7 @@ void ipvlan_link_setup(struct net_device *dev) { ether_setup(dev); + dev->max_mtu = ETH_MAX_MTU; dev->priv_flags &= ~(IFF_XMIT_DST_RELEASE | IFF_TX_SKB_SHARING); dev->priv_flags |= IFF_UNICAST_FLT | IFF_NO_QUEUE; dev->netdev_ops = &ipvlan_netdev_ops; diff --git a/drivers/net/net_failover.c b/drivers/net/net_failover.c index 83f7420ddea5..4f390fa557e4 100644 --- a/drivers/net/net_failover.c +++ b/drivers/net/net_failover.c @@ -527,7 +527,7 @@ static int net_failover_slave_register(struct net_device *slave_dev, netif_addr_lock_bh(failover_dev); dev_uc_sync_multiple(slave_dev, failover_dev); - dev_uc_sync_multiple(slave_dev, failover_dev); + dev_mc_sync_multiple(slave_dev, failover_dev); netif_addr_unlock_bh(failover_dev); err = vlan_vids_add_by_dev(slave_dev, failover_dev); diff --git a/drivers/net/ppp/pppoe.c b/drivers/net/ppp/pppoe.c index de51e8f70f44..ce61231e96ea 100644 --- a/drivers/net/ppp/pppoe.c +++ b/drivers/net/ppp/pppoe.c @@ -1107,7 +1107,7 @@ static const struct proto_ops pppoe_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = pppoe_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .listen = sock_no_listen, .shutdown = sock_no_shutdown, .setsockopt = sock_no_setsockopt, diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index b0e8b9613054..1eaec648bd1f 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -967,8 +967,7 @@ void cdc_ncm_unbind(struct usbnet *dev, struct usb_interface *intf) atomic_set(&ctx->stop, 1); - if (hrtimer_active(&ctx->tx_timer)) - hrtimer_cancel(&ctx->tx_timer); + hrtimer_cancel(&ctx->tx_timer); tasklet_kill(&ctx->bh); diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 8e8b51f171f4..8fac8e132c5b 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1246,6 +1246,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x413c, 0x81b3, 8)}, /* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card (rev3) */ {QMI_FIXED_INTF(0x413c, 0x81b6, 8)}, /* Dell Wireless 5811e */ {QMI_FIXED_INTF(0x413c, 0x81b6, 10)}, /* Dell Wireless 5811e */ + {QMI_FIXED_INTF(0x413c, 0x81d7, 1)}, /* Dell Wireless 5821e */ {QMI_FIXED_INTF(0x03f0, 0x4e1d, 8)}, /* HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module */ {QMI_FIXED_INTF(0x03f0, 0x9d1d, 1)}, /* HP lt4120 Snapdragon X5 LTE */ {QMI_FIXED_INTF(0x22de, 0x9061, 3)}, /* WeTelecom WPD-600N */ diff --git a/drivers/net/wireless/broadcom/brcm80211/Kconfig b/drivers/net/wireless/broadcom/brcm80211/Kconfig index 9d99eb42d917..6acba67bca07 100644 --- a/drivers/net/wireless/broadcom/brcm80211/Kconfig +++ b/drivers/net/wireless/broadcom/brcm80211/Kconfig @@ -60,7 +60,6 @@ config BRCMFMAC_PCIE bool "PCIE bus interface support for FullMAC driver" depends on BRCMFMAC depends on PCI - depends on HAS_DMA select BRCMFMAC_PROTO_MSGBUF select FW_LOADER ---help--- diff --git a/drivers/net/wireless/quantenna/qtnfmac/Kconfig b/drivers/net/wireless/quantenna/qtnfmac/Kconfig index 025fa6018550..8d1492a90bd1 100644 --- a/drivers/net/wireless/quantenna/qtnfmac/Kconfig +++ b/drivers/net/wireless/quantenna/qtnfmac/Kconfig @@ -7,7 +7,7 @@ config QTNFMAC config QTNFMAC_PEARL_PCIE tristate "Quantenna QSR10g PCIe support" default n - depends on HAS_DMA && PCI && CFG80211 + depends on PCI && CFG80211 select QTNFMAC select FW_LOADER select CRC32 diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index 922ce0abf5cf..a57daecf1d57 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -1810,7 +1810,7 @@ static int talk_to_netback(struct xenbus_device *dev, err = xen_net_read_mac(dev, info->netdev->dev_addr); if (err) { xenbus_dev_fatal(dev, err, "parsing %s/mac", dev->nodename); - goto out; + goto out_unlocked; } rtnl_lock(); @@ -1925,6 +1925,7 @@ abort_transaction_no_dev_fatal: xennet_destroy_queues(info); out: rtnl_unlock(); +out_unlocked: device_unregister(&dev->dev); return err; } @@ -1950,10 +1951,6 @@ static int xennet_connect(struct net_device *dev) /* talk_to_netback() sets the correct number of queues */ num_queues = dev->real_num_tx_queues; - rtnl_lock(); - netdev_update_features(dev); - rtnl_unlock(); - if (dev->reg_state == NETREG_UNINITIALIZED) { err = register_netdev(dev); if (err) { @@ -1963,6 +1960,10 @@ static int xennet_connect(struct net_device *dev) } } + rtnl_lock(); + netdev_update_features(dev); + rtnl_unlock(); + /* * All public and private state should now be sane. Get * ready to start sending and receiving packets and give the driver diff --git a/drivers/nfc/pn533/usb.c b/drivers/nfc/pn533/usb.c index d5553c47014f..5d823e965883 100644 --- a/drivers/nfc/pn533/usb.c +++ b/drivers/nfc/pn533/usb.c @@ -74,7 +74,7 @@ static void pn533_recv_response(struct urb *urb) struct sk_buff *skb = NULL; if (!urb->status) { - skb = alloc_skb(urb->actual_length, GFP_KERNEL); + skb = alloc_skb(urb->actual_length, GFP_ATOMIC); if (!skb) { nfc_err(&phy->udev->dev, "failed to alloc memory\n"); } else { @@ -186,7 +186,7 @@ static int pn533_usb_send_frame(struct pn533 *dev, if (dev->protocol_type == PN533_PROTO_REQ_RESP) { /* request for response for sent packet directly */ - rc = pn533_submit_urb_for_response(phy, GFP_ATOMIC); + rc = pn533_submit_urb_for_response(phy, GFP_KERNEL); if (rc) goto error; } else if (dev->protocol_type == PN533_PROTO_REQ_ACK_RESP) { diff --git a/drivers/nvdimm/pmem.c b/drivers/nvdimm/pmem.c index 68940356cad3..8b1fd7f1a224 100644 --- a/drivers/nvdimm/pmem.c +++ b/drivers/nvdimm/pmem.c @@ -414,7 +414,8 @@ static int pmem_attach_disk(struct device *dev, blk_queue_logical_block_size(q, pmem_sector_size(ndns)); blk_queue_max_hw_sectors(q, UINT_MAX); blk_queue_flag_set(QUEUE_FLAG_NONROT, q); - blk_queue_flag_set(QUEUE_FLAG_DAX, q); + if (pmem->pfn_flags & PFN_MAP) + blk_queue_flag_set(QUEUE_FLAG_DAX, q); q->queuedata = pmem; disk = alloc_disk_node(0, nid); diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 21710a7460c8..46df030b2c3f 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -1808,6 +1808,7 @@ static void nvme_set_queue_limits(struct nvme_ctrl *ctrl, u32 max_segments = (ctrl->max_hw_sectors / (ctrl->page_size >> 9)) + 1; + max_segments = min_not_zero(max_segments, ctrl->max_segments); blk_queue_max_hw_sectors(q, ctrl->max_hw_sectors); blk_queue_max_segments(q, min_t(u32, max_segments, USHRT_MAX)); } diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c index b528a2f5826c..41d45a1b5c62 100644 --- a/drivers/nvme/host/fc.c +++ b/drivers/nvme/host/fc.c @@ -2790,6 +2790,9 @@ nvme_fc_delete_association(struct nvme_fc_ctrl *ctrl) /* re-enable the admin_q so anything new can fast fail */ blk_mq_unquiesce_queue(ctrl->ctrl.admin_q); + /* resume the io queues so that things will fast fail */ + nvme_start_queues(&ctrl->ctrl); + nvme_fc_ctlr_inactive_on_rport(ctrl); } @@ -2804,9 +2807,6 @@ nvme_fc_delete_ctrl(struct nvme_ctrl *nctrl) * waiting for io to terminate */ nvme_fc_delete_association(ctrl); - - /* resume the io queues so that things will fast fail */ - nvme_start_queues(nctrl); } static void diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h index 231807cbc849..0c4a33df3b2f 100644 --- a/drivers/nvme/host/nvme.h +++ b/drivers/nvme/host/nvme.h @@ -170,6 +170,7 @@ struct nvme_ctrl { u64 cap; u32 page_size; u32 max_hw_sectors; + u32 max_segments; u16 oncs; u16 oacs; u16 nssa; diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index fc33804662e7..ba943f211687 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -38,6 +38,13 @@ #define SGES_PER_PAGE (PAGE_SIZE / sizeof(struct nvme_sgl_desc)) +/* + * These can be higher, but we need to ensure that any command doesn't + * require an sg allocation that needs more than a page of data. + */ +#define NVME_MAX_KB_SZ 4096 +#define NVME_MAX_SEGS 127 + static int use_threaded_interrupts; module_param(use_threaded_interrupts, int, 0); @@ -100,6 +107,8 @@ struct nvme_dev { struct nvme_ctrl ctrl; struct completion ioq_wait; + mempool_t *iod_mempool; + /* shadow doorbell buffer support: */ u32 *dbbuf_dbs; dma_addr_t dbbuf_dbs_dma_addr; @@ -477,10 +486,7 @@ static blk_status_t nvme_init_iod(struct request *rq, struct nvme_dev *dev) iod->use_sgl = nvme_pci_use_sgls(dev, rq); if (nseg > NVME_INT_PAGES || size > NVME_INT_BYTES(dev)) { - size_t alloc_size = nvme_pci_iod_alloc_size(dev, size, nseg, - iod->use_sgl); - - iod->sg = kmalloc(alloc_size, GFP_ATOMIC); + iod->sg = mempool_alloc(dev->iod_mempool, GFP_ATOMIC); if (!iod->sg) return BLK_STS_RESOURCE; } else { @@ -526,7 +532,7 @@ static void nvme_free_iod(struct nvme_dev *dev, struct request *req) } if (iod->sg != iod->inline_sg) - kfree(iod->sg); + mempool_free(iod->sg, dev->iod_mempool); } #ifdef CONFIG_BLK_DEV_INTEGRITY @@ -2280,6 +2286,7 @@ static void nvme_pci_free_ctrl(struct nvme_ctrl *ctrl) blk_put_queue(dev->ctrl.admin_q); kfree(dev->queues); free_opal_dev(dev->ctrl.opal_dev); + mempool_destroy(dev->iod_mempool); kfree(dev); } @@ -2289,6 +2296,7 @@ static void nvme_remove_dead_ctrl(struct nvme_dev *dev, int status) nvme_get_ctrl(&dev->ctrl); nvme_dev_disable(dev, false); + nvme_kill_queues(&dev->ctrl); if (!queue_work(nvme_wq, &dev->remove_work)) nvme_put_ctrl(&dev->ctrl); } @@ -2333,6 +2341,13 @@ static void nvme_reset_work(struct work_struct *work) if (result) goto out; + /* + * Limit the max command size to prevent iod->sg allocations going + * over a single page. + */ + dev->ctrl.max_hw_sectors = NVME_MAX_KB_SZ << 1; + dev->ctrl.max_segments = NVME_MAX_SEGS; + result = nvme_init_identify(&dev->ctrl); if (result) goto out; @@ -2405,7 +2420,6 @@ static void nvme_remove_dead_ctrl_work(struct work_struct *work) struct nvme_dev *dev = container_of(work, struct nvme_dev, remove_work); struct pci_dev *pdev = to_pci_dev(dev->dev); - nvme_kill_queues(&dev->ctrl); if (pci_get_drvdata(pdev)) device_release_driver(&pdev->dev); nvme_put_ctrl(&dev->ctrl); @@ -2509,6 +2523,7 @@ static int nvme_probe(struct pci_dev *pdev, const struct pci_device_id *id) int node, result = -ENOMEM; struct nvme_dev *dev; unsigned long quirks = id->driver_data; + size_t alloc_size; node = dev_to_node(&pdev->dev); if (node == NUMA_NO_NODE) @@ -2546,6 +2561,23 @@ static int nvme_probe(struct pci_dev *pdev, const struct pci_device_id *id) if (result) goto release_pools; + /* + * Double check that our mempool alloc size will cover the biggest + * command we support. + */ + alloc_size = nvme_pci_iod_alloc_size(dev, NVME_MAX_KB_SZ, + NVME_MAX_SEGS, true); + WARN_ON_ONCE(alloc_size > PAGE_SIZE); + + dev->iod_mempool = mempool_create_node(1, mempool_kmalloc, + mempool_kfree, + (void *) alloc_size, + GFP_KERNEL, node); + if (!dev->iod_mempool) { + result = -ENOMEM; + goto release_pools; + } + dev_info(dev->ctrl.device, "pci function %s\n", dev_name(&pdev->dev)); nvme_get_ctrl(&dev->ctrl); diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c index c9424da0d23e..518c5b09038c 100644 --- a/drivers/nvme/host/rdma.c +++ b/drivers/nvme/host/rdma.c @@ -560,12 +560,6 @@ static void nvme_rdma_free_queue(struct nvme_rdma_queue *queue) if (!test_and_clear_bit(NVME_RDMA_Q_ALLOCATED, &queue->flags)) return; - if (nvme_rdma_queue_idx(queue) == 0) { - nvme_rdma_free_qe(queue->device->dev, - &queue->ctrl->async_event_sqe, - sizeof(struct nvme_command), DMA_TO_DEVICE); - } - nvme_rdma_destroy_queue_ib(queue); rdma_destroy_id(queue->cm_id); } @@ -698,7 +692,7 @@ static struct blk_mq_tag_set *nvme_rdma_alloc_tagset(struct nvme_ctrl *nctrl, set = &ctrl->tag_set; memset(set, 0, sizeof(*set)); set->ops = &nvme_rdma_mq_ops; - set->queue_depth = nctrl->opts->queue_size; + set->queue_depth = nctrl->sqsize + 1; set->reserved_tags = 1; /* fabric connect */ set->numa_node = NUMA_NO_NODE; set->flags = BLK_MQ_F_SHOULD_MERGE; @@ -734,11 +728,15 @@ out: static void nvme_rdma_destroy_admin_queue(struct nvme_rdma_ctrl *ctrl, bool remove) { - nvme_rdma_stop_queue(&ctrl->queues[0]); if (remove) { blk_cleanup_queue(ctrl->ctrl.admin_q); nvme_rdma_free_tagset(&ctrl->ctrl, ctrl->ctrl.admin_tagset); } + if (ctrl->async_event_sqe.data) { + nvme_rdma_free_qe(ctrl->device->dev, &ctrl->async_event_sqe, + sizeof(struct nvme_command), DMA_TO_DEVICE); + ctrl->async_event_sqe.data = NULL; + } nvme_rdma_free_queue(&ctrl->queues[0]); } @@ -755,11 +753,16 @@ static int nvme_rdma_configure_admin_queue(struct nvme_rdma_ctrl *ctrl, ctrl->max_fr_pages = nvme_rdma_get_max_fr_pages(ctrl->device->dev); + error = nvme_rdma_alloc_qe(ctrl->device->dev, &ctrl->async_event_sqe, + sizeof(struct nvme_command), DMA_TO_DEVICE); + if (error) + goto out_free_queue; + if (new) { ctrl->ctrl.admin_tagset = nvme_rdma_alloc_tagset(&ctrl->ctrl, true); if (IS_ERR(ctrl->ctrl.admin_tagset)) { error = PTR_ERR(ctrl->ctrl.admin_tagset); - goto out_free_queue; + goto out_free_async_qe; } ctrl->ctrl.admin_q = blk_mq_init_queue(&ctrl->admin_tag_set); @@ -795,12 +798,6 @@ static int nvme_rdma_configure_admin_queue(struct nvme_rdma_ctrl *ctrl, if (error) goto out_stop_queue; - error = nvme_rdma_alloc_qe(ctrl->queues[0].device->dev, - &ctrl->async_event_sqe, sizeof(struct nvme_command), - DMA_TO_DEVICE); - if (error) - goto out_stop_queue; - return 0; out_stop_queue: @@ -811,6 +808,9 @@ out_cleanup_queue: out_free_tagset: if (new) nvme_rdma_free_tagset(&ctrl->ctrl, ctrl->ctrl.admin_tagset); +out_free_async_qe: + nvme_rdma_free_qe(ctrl->device->dev, &ctrl->async_event_sqe, + sizeof(struct nvme_command), DMA_TO_DEVICE); out_free_queue: nvme_rdma_free_queue(&ctrl->queues[0]); return error; @@ -819,7 +819,6 @@ out_free_queue: static void nvme_rdma_destroy_io_queues(struct nvme_rdma_ctrl *ctrl, bool remove) { - nvme_rdma_stop_io_queues(ctrl); if (remove) { blk_cleanup_queue(ctrl->ctrl.connect_q); nvme_rdma_free_tagset(&ctrl->ctrl, ctrl->ctrl.tagset); @@ -888,9 +887,9 @@ static void nvme_rdma_free_ctrl(struct nvme_ctrl *nctrl) list_del(&ctrl->list); mutex_unlock(&nvme_rdma_ctrl_mutex); - kfree(ctrl->queues); nvmf_free_options(nctrl->opts); free_ctrl: + kfree(ctrl->queues); kfree(ctrl); } @@ -949,6 +948,7 @@ static void nvme_rdma_reconnect_ctrl_work(struct work_struct *work) return; destroy_admin: + nvme_rdma_stop_queue(&ctrl->queues[0]); nvme_rdma_destroy_admin_queue(ctrl, false); requeue: dev_info(ctrl->ctrl.device, "Failed reconnect attempt %d\n", @@ -965,12 +965,14 @@ static void nvme_rdma_error_recovery_work(struct work_struct *work) if (ctrl->ctrl.queue_count > 1) { nvme_stop_queues(&ctrl->ctrl); + nvme_rdma_stop_io_queues(ctrl); blk_mq_tagset_busy_iter(&ctrl->tag_set, nvme_cancel_request, &ctrl->ctrl); nvme_rdma_destroy_io_queues(ctrl, false); } blk_mq_quiesce_queue(ctrl->ctrl.admin_q); + nvme_rdma_stop_queue(&ctrl->queues[0]); blk_mq_tagset_busy_iter(&ctrl->admin_tag_set, nvme_cancel_request, &ctrl->ctrl); nvme_rdma_destroy_admin_queue(ctrl, false); @@ -1736,6 +1738,7 @@ static void nvme_rdma_shutdown_ctrl(struct nvme_rdma_ctrl *ctrl, bool shutdown) { if (ctrl->ctrl.queue_count > 1) { nvme_stop_queues(&ctrl->ctrl); + nvme_rdma_stop_io_queues(ctrl); blk_mq_tagset_busy_iter(&ctrl->tag_set, nvme_cancel_request, &ctrl->ctrl); nvme_rdma_destroy_io_queues(ctrl, shutdown); @@ -1747,6 +1750,7 @@ static void nvme_rdma_shutdown_ctrl(struct nvme_rdma_ctrl *ctrl, bool shutdown) nvme_disable_ctrl(&ctrl->ctrl, ctrl->ctrl.cap); blk_mq_quiesce_queue(ctrl->ctrl.admin_q); + nvme_rdma_stop_queue(&ctrl->queues[0]); blk_mq_tagset_busy_iter(&ctrl->admin_tag_set, nvme_cancel_request, &ctrl->ctrl); blk_mq_unquiesce_queue(ctrl->ctrl.admin_q); @@ -1932,11 +1936,6 @@ static struct nvme_ctrl *nvme_rdma_create_ctrl(struct device *dev, goto out_free_ctrl; } - ret = nvme_init_ctrl(&ctrl->ctrl, dev, &nvme_rdma_ctrl_ops, - 0 /* no quirks, we're perfect! */); - if (ret) - goto out_free_ctrl; - INIT_DELAYED_WORK(&ctrl->reconnect_work, nvme_rdma_reconnect_ctrl_work); INIT_WORK(&ctrl->err_work, nvme_rdma_error_recovery_work); @@ -1950,14 +1949,19 @@ static struct nvme_ctrl *nvme_rdma_create_ctrl(struct device *dev, ctrl->queues = kcalloc(ctrl->ctrl.queue_count, sizeof(*ctrl->queues), GFP_KERNEL); if (!ctrl->queues) - goto out_uninit_ctrl; + goto out_free_ctrl; + + ret = nvme_init_ctrl(&ctrl->ctrl, dev, &nvme_rdma_ctrl_ops, + 0 /* no quirks, we're perfect! */); + if (ret) + goto out_kfree_queues; changed = nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_CONNECTING); WARN_ON_ONCE(!changed); ret = nvme_rdma_configure_admin_queue(ctrl, true); if (ret) - goto out_kfree_queues; + goto out_uninit_ctrl; /* sanity check icdoff */ if (ctrl->ctrl.icdoff) { @@ -1974,20 +1978,19 @@ static struct nvme_ctrl *nvme_rdma_create_ctrl(struct device *dev, goto out_remove_admin_queue; } - if (opts->queue_size > ctrl->ctrl.maxcmd) { - /* warn if maxcmd is lower than queue_size */ - dev_warn(ctrl->ctrl.device, - "queue_size %zu > ctrl maxcmd %u, clamping down\n", - opts->queue_size, ctrl->ctrl.maxcmd); - opts->queue_size = ctrl->ctrl.maxcmd; - } - + /* only warn if argument is too large here, will clamp later */ if (opts->queue_size > ctrl->ctrl.sqsize + 1) { - /* warn if sqsize is lower than queue_size */ dev_warn(ctrl->ctrl.device, "queue_size %zu > ctrl sqsize %u, clamping down\n", opts->queue_size, ctrl->ctrl.sqsize + 1); - opts->queue_size = ctrl->ctrl.sqsize + 1; + } + + /* warn if maxcmd is lower than sqsize+1 */ + if (ctrl->ctrl.sqsize + 1 > ctrl->ctrl.maxcmd) { + dev_warn(ctrl->ctrl.device, + "sqsize %u > ctrl maxcmd %u, clamping down\n", + ctrl->ctrl.sqsize + 1, ctrl->ctrl.maxcmd); + ctrl->ctrl.sqsize = ctrl->ctrl.maxcmd - 1; } if (opts->nr_io_queues) { @@ -2013,15 +2016,16 @@ static struct nvme_ctrl *nvme_rdma_create_ctrl(struct device *dev, return &ctrl->ctrl; out_remove_admin_queue: + nvme_rdma_stop_queue(&ctrl->queues[0]); nvme_rdma_destroy_admin_queue(ctrl, true); -out_kfree_queues: - kfree(ctrl->queues); out_uninit_ctrl: nvme_uninit_ctrl(&ctrl->ctrl); nvme_put_ctrl(&ctrl->ctrl); if (ret > 0) ret = -EIO; return ERR_PTR(ret); +out_kfree_queues: + kfree(ctrl->queues); out_free_ctrl: kfree(ctrl); return ERR_PTR(ret); diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c index a03da764ecae..74d4b785d2da 100644 --- a/drivers/nvme/target/core.c +++ b/drivers/nvme/target/core.c @@ -686,6 +686,14 @@ static void nvmet_start_ctrl(struct nvmet_ctrl *ctrl) } ctrl->csts = NVME_CSTS_RDY; + + /* + * Controllers that are not yet enabled should not really enforce the + * keep alive timeout, but we still want to track a timeout and cleanup + * in case a host died before it enabled the controller. Hence, simply + * reset the keep alive timer when the controller is enabled. + */ + mod_delayed_work(system_wq, &ctrl->ka_work, ctrl->kato * HZ); } static void nvmet_clear_ctrl(struct nvmet_ctrl *ctrl) diff --git a/drivers/opp/core.c b/drivers/opp/core.c index ab2f3fead6b1..31ff03dbeb83 100644 --- a/drivers/opp/core.c +++ b/drivers/opp/core.c @@ -598,7 +598,7 @@ static int _generic_set_opp_regulator(const struct opp_table *opp_table, } /* Scaling up? Scale voltage before frequency */ - if (freq > old_freq) { + if (freq >= old_freq) { ret = _set_opp_voltage(dev, reg, new_supply); if (ret) goto restore_voltage; diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 535201984b8b..1b2cfe51e8d7 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -28,10 +28,10 @@ obj-$(CONFIG_PCI_PF_STUB) += pci-pf-stub.o obj-$(CONFIG_PCI_ECAM) += ecam.o obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o -obj-y += controller/ -obj-y += switch/ - # Endpoint library must be initialized before its users obj-$(CONFIG_PCI_ENDPOINT) += endpoint/ +obj-y += controller/ +obj-y += switch/ + ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig index 18fa09b3ac8f..cc9fa02d32a0 100644 --- a/drivers/pci/controller/Kconfig +++ b/drivers/pci/controller/Kconfig @@ -96,7 +96,6 @@ config PCI_HOST_GENERIC depends on OF select PCI_HOST_COMMON select IRQ_DOMAIN - select PCI_DOMAINS help Say Y here if you want to support a simple generic PCI host controller, such as the one emulated by kvmtool. @@ -138,7 +137,6 @@ config PCI_VERSATILE config PCIE_IPROC tristate - select PCI_DOMAINS help This enables the iProc PCIe core controller support for Broadcom's iProc family of SoCs. An appropriate bus interface driver needs @@ -176,7 +174,6 @@ config PCIE_IPROC_MSI config PCIE_ALTERA bool "Altera PCIe controller" depends on ARM || NIOS2 || COMPILE_TEST - select PCI_DOMAINS help Say Y here if you want to enable PCIe controller support on Altera FPGA. diff --git a/drivers/pci/hotplug/acpi_pcihp.c b/drivers/pci/hotplug/acpi_pcihp.c index 3979f89b250a..5bd6c1573295 100644 --- a/drivers/pci/hotplug/acpi_pcihp.c +++ b/drivers/pci/hotplug/acpi_pcihp.c @@ -7,7 +7,6 @@ * All rights reserved. * * Send feedback to <kristen.c.accardi@intel.com> - * */ #include <linux/module.h> @@ -87,8 +86,17 @@ int acpi_get_hp_hw_control_from_firmware(struct pci_dev *pdev) return 0; /* If _OSC exists, we should not evaluate OSHP */ + + /* + * If there's no ACPI host bridge (i.e., ACPI support is compiled + * into the kernel but the hardware platform doesn't support ACPI), + * there's nothing to do here. + */ host = pci_find_host_bridge(pdev->bus); root = acpi_pci_find_root(ACPI_HANDLE(&host->dev)); + if (!root) + return 0; + if (root->osc_support_set) goto no_control; diff --git a/drivers/perf/xgene_pmu.c b/drivers/perf/xgene_pmu.c index 6bdb1dad805f..0e31f1392a53 100644 --- a/drivers/perf/xgene_pmu.c +++ b/drivers/perf/xgene_pmu.c @@ -1463,7 +1463,7 @@ static char *xgene_pmu_dev_name(struct device *dev, u32 type, int id) case PMU_TYPE_IOB: return devm_kasprintf(dev, GFP_KERNEL, "iob%d", id); case PMU_TYPE_IOB_SLOW: - return devm_kasprintf(dev, GFP_KERNEL, "iob-slow%d", id); + return devm_kasprintf(dev, GFP_KERNEL, "iob_slow%d", id); case PMU_TYPE_MCB: return devm_kasprintf(dev, GFP_KERNEL, "mcb%d", id); case PMU_TYPE_MC: diff --git a/drivers/pinctrl/actions/pinctrl-owl.c b/drivers/pinctrl/actions/pinctrl-owl.c index 76243caa08c6..b5c880b50bb3 100644 --- a/drivers/pinctrl/actions/pinctrl-owl.c +++ b/drivers/pinctrl/actions/pinctrl-owl.c @@ -333,7 +333,7 @@ static int owl_pin_config_set(struct pinctrl_dev *pctrldev, unsigned long flags; unsigned int param; u32 reg, bit, width, arg; - int ret, i; + int ret = 0, i; info = &pctrl->soc->padinfo[pin]; diff --git a/drivers/pinctrl/devicetree.c b/drivers/pinctrl/devicetree.c index b601039d6c69..c4aa411f5935 100644 --- a/drivers/pinctrl/devicetree.c +++ b/drivers/pinctrl/devicetree.c @@ -101,10 +101,11 @@ struct pinctrl_dev *of_pinctrl_get(struct device_node *np) } static int dt_to_map_one_config(struct pinctrl *p, - struct pinctrl_dev *pctldev, + struct pinctrl_dev *hog_pctldev, const char *statename, struct device_node *np_config) { + struct pinctrl_dev *pctldev = NULL; struct device_node *np_pctldev; const struct pinctrl_ops *ops; int ret; @@ -123,8 +124,10 @@ static int dt_to_map_one_config(struct pinctrl *p, return -EPROBE_DEFER; } /* If we're creating a hog we can use the passed pctldev */ - if (pctldev && (np_pctldev == p->dev->of_node)) + if (hog_pctldev && (np_pctldev == p->dev->of_node)) { + pctldev = hog_pctldev; break; + } pctldev = get_pinctrl_dev_from_of_node(np_pctldev); if (pctldev) break; diff --git a/drivers/pinctrl/mediatek/pinctrl-mt7622.c b/drivers/pinctrl/mediatek/pinctrl-mt7622.c index ad6da1184c9f..e3f1ab2290fc 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mt7622.c +++ b/drivers/pinctrl/mediatek/pinctrl-mt7622.c @@ -1459,6 +1459,9 @@ static int mtk_gpio_to_irq(struct gpio_chip *chip, unsigned int offset) struct mtk_pinctrl *hw = gpiochip_get_data(chip); unsigned long eint_n; + if (!hw->eint) + return -ENOTSUPP; + eint_n = offset; return mtk_eint_find_irq(hw->eint, eint_n); @@ -1471,7 +1474,8 @@ static int mtk_gpio_set_config(struct gpio_chip *chip, unsigned int offset, unsigned long eint_n; u32 debounce; - if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE) + if (!hw->eint || + pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE) return -ENOTSUPP; debounce = pinconf_to_config_argument(config); diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c index b3799695d8db..16ff56f93501 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c @@ -1000,11 +1000,6 @@ static int mtk_eint_init(struct mtk_pinctrl *pctl, struct platform_device *pdev) return -ENOMEM; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "Unable to get eint resource\n"); - return -ENODEV; - } - pctl->eint->base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(pctl->eint->base)) return PTR_ERR(pctl->eint->base); diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c index b3153c095199..e5647dac0818 100644 --- a/drivers/pinctrl/pinctrl-single.c +++ b/drivers/pinctrl/pinctrl-single.c @@ -1590,8 +1590,11 @@ static int pcs_save_context(struct pcs_device *pcs) mux_bytes = pcs->width / BITS_PER_BYTE; - if (!pcs->saved_vals) + if (!pcs->saved_vals) { pcs->saved_vals = devm_kzalloc(pcs->dev, pcs->size, GFP_ATOMIC); + if (!pcs->saved_vals) + return -ENOMEM; + } switch (pcs->width) { case 64: @@ -1651,8 +1654,13 @@ static int pinctrl_single_suspend(struct platform_device *pdev, if (!pcs) return -EINVAL; - if (pcs->flags & PCS_CONTEXT_LOSS_OFF) - pcs_save_context(pcs); + if (pcs->flags & PCS_CONTEXT_LOSS_OFF) { + int ret; + + ret = pcs_save_context(pcs); + if (ret < 0) + return ret; + } return pinctrl_force_sleep(pcs->pctl); } diff --git a/drivers/ptp/ptp_chardev.c b/drivers/ptp/ptp_chardev.c index 767c485af59b..547dbdac9d54 100644 --- a/drivers/ptp/ptp_chardev.c +++ b/drivers/ptp/ptp_chardev.c @@ -221,7 +221,7 @@ long ptp_ioctl(struct posix_clock *pc, unsigned int cmd, unsigned long arg) } pct = &sysoff->ts[0]; for (i = 0; i < sysoff->n_samples; i++) { - getnstimeofday64(&ts); + ktime_get_real_ts64(&ts); pct->sec = ts.tv_sec; pct->nsec = ts.tv_nsec; pct++; @@ -230,7 +230,7 @@ long ptp_ioctl(struct posix_clock *pc, unsigned int cmd, unsigned long arg) pct->nsec = ts.tv_nsec; pct++; } - getnstimeofday64(&ts); + ktime_get_real_ts64(&ts); pct->sec = ts.tv_sec; pct->nsec = ts.tv_nsec; if (copy_to_user((void __user *)arg, sysoff, sizeof(*sysoff))) diff --git a/drivers/ptp/ptp_qoriq.c b/drivers/ptp/ptp_qoriq.c index 1468a1642b49..e8652c148c52 100644 --- a/drivers/ptp/ptp_qoriq.c +++ b/drivers/ptp/ptp_qoriq.c @@ -374,7 +374,7 @@ static int qoriq_ptp_probe(struct platform_device *dev) pr_err("ioremap ptp registers failed\n"); goto no_ioremap; } - getnstimeofday64(&now); + ktime_get_real_ts64(&now); ptp_qoriq_settime(&qoriq_ptp->caps, &now); tmr_ctrl = diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 73cce3ecb97f..d3a38c421503 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -1222,80 +1222,37 @@ static void dasd_hosts_init(struct dentry *base_dentry, device->hosts_dentry = pde; } -/* - * Allocate memory for a channel program with 'cplength' channel - * command words and 'datasize' additional space. There are two - * variantes: 1) dasd_kmalloc_request uses kmalloc to get the needed - * memory and 2) dasd_smalloc_request uses the static ccw memory - * that gets allocated for each device. - */ -struct dasd_ccw_req *dasd_kmalloc_request(int magic, int cplength, - int datasize, - struct dasd_device *device) -{ - struct dasd_ccw_req *cqr; - - /* Sanity checks */ - BUG_ON(datasize > PAGE_SIZE || - (cplength*sizeof(struct ccw1)) > PAGE_SIZE); - - cqr = kzalloc(sizeof(struct dasd_ccw_req), GFP_ATOMIC); - if (cqr == NULL) - return ERR_PTR(-ENOMEM); - cqr->cpaddr = NULL; - if (cplength > 0) { - cqr->cpaddr = kcalloc(cplength, sizeof(struct ccw1), - GFP_ATOMIC | GFP_DMA); - if (cqr->cpaddr == NULL) { - kfree(cqr); - return ERR_PTR(-ENOMEM); - } - } - cqr->data = NULL; - if (datasize > 0) { - cqr->data = kzalloc(datasize, GFP_ATOMIC | GFP_DMA); - if (cqr->data == NULL) { - kfree(cqr->cpaddr); - kfree(cqr); - return ERR_PTR(-ENOMEM); - } - } - cqr->magic = magic; - set_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags); - dasd_get_device(device); - return cqr; -} -EXPORT_SYMBOL(dasd_kmalloc_request); - -struct dasd_ccw_req *dasd_smalloc_request(int magic, int cplength, - int datasize, - struct dasd_device *device) +struct dasd_ccw_req *dasd_smalloc_request(int magic, int cplength, int datasize, + struct dasd_device *device, + struct dasd_ccw_req *cqr) { unsigned long flags; - struct dasd_ccw_req *cqr; - char *data; - int size; + char *data, *chunk; + int size = 0; - size = (sizeof(struct dasd_ccw_req) + 7L) & -8L; if (cplength > 0) size += cplength * sizeof(struct ccw1); if (datasize > 0) size += datasize; + if (!cqr) + size += (sizeof(*cqr) + 7L) & -8L; + spin_lock_irqsave(&device->mem_lock, flags); - cqr = (struct dasd_ccw_req *) - dasd_alloc_chunk(&device->ccw_chunks, size); + data = chunk = dasd_alloc_chunk(&device->ccw_chunks, size); spin_unlock_irqrestore(&device->mem_lock, flags); - if (cqr == NULL) + if (!chunk) return ERR_PTR(-ENOMEM); - memset(cqr, 0, sizeof(struct dasd_ccw_req)); - data = (char *) cqr + ((sizeof(struct dasd_ccw_req) + 7L) & -8L); - cqr->cpaddr = NULL; + if (!cqr) { + cqr = (void *) data; + data += (sizeof(*cqr) + 7L) & -8L; + } + memset(cqr, 0, sizeof(*cqr)); + cqr->mem_chunk = chunk; if (cplength > 0) { - cqr->cpaddr = (struct ccw1 *) data; - data += cplength*sizeof(struct ccw1); - memset(cqr->cpaddr, 0, cplength*sizeof(struct ccw1)); + cqr->cpaddr = data; + data += cplength * sizeof(struct ccw1); + memset(cqr->cpaddr, 0, cplength * sizeof(struct ccw1)); } - cqr->data = NULL; if (datasize > 0) { cqr->data = data; memset(cqr->data, 0, datasize); @@ -1307,33 +1264,12 @@ struct dasd_ccw_req *dasd_smalloc_request(int magic, int cplength, } EXPORT_SYMBOL(dasd_smalloc_request); -/* - * Free memory of a channel program. This function needs to free all the - * idal lists that might have been created by dasd_set_cda and the - * struct dasd_ccw_req itself. - */ -void dasd_kfree_request(struct dasd_ccw_req *cqr, struct dasd_device *device) -{ - struct ccw1 *ccw; - - /* Clear any idals used for the request. */ - ccw = cqr->cpaddr; - do { - clear_normalized_cda(ccw); - } while (ccw++->flags & (CCW_FLAG_CC | CCW_FLAG_DC)); - kfree(cqr->cpaddr); - kfree(cqr->data); - kfree(cqr); - dasd_put_device(device); -} -EXPORT_SYMBOL(dasd_kfree_request); - void dasd_sfree_request(struct dasd_ccw_req *cqr, struct dasd_device *device) { unsigned long flags; spin_lock_irqsave(&device->mem_lock, flags); - dasd_free_chunk(&device->ccw_chunks, cqr); + dasd_free_chunk(&device->ccw_chunks, cqr->mem_chunk); spin_unlock_irqrestore(&device->mem_lock, flags); dasd_put_device(device); } @@ -1885,6 +1821,33 @@ static void __dasd_device_process_ccw_queue(struct dasd_device *device, } } +static void __dasd_process_cqr(struct dasd_device *device, + struct dasd_ccw_req *cqr) +{ + char errorstring[ERRORLENGTH]; + + switch (cqr->status) { + case DASD_CQR_SUCCESS: + cqr->status = DASD_CQR_DONE; + break; + case DASD_CQR_ERROR: + cqr->status = DASD_CQR_NEED_ERP; + break; + case DASD_CQR_CLEARED: + cqr->status = DASD_CQR_TERMINATED; + break; + default: + /* internal error 12 - wrong cqr status*/ + snprintf(errorstring, ERRORLENGTH, "12 %p %x02", cqr, cqr->status); + dev_err(&device->cdev->dev, + "An error occurred in the DASD device driver, " + "reason=%s\n", errorstring); + BUG(); + } + if (cqr->callback) + cqr->callback(cqr, cqr->callback_data); +} + /* * the cqrs from the final queue are returned to the upper layer * by setting a dasd_block state and calling the callback function @@ -1895,40 +1858,18 @@ static void __dasd_device_process_final_queue(struct dasd_device *device, struct list_head *l, *n; struct dasd_ccw_req *cqr; struct dasd_block *block; - void (*callback)(struct dasd_ccw_req *, void *data); - void *callback_data; - char errorstring[ERRORLENGTH]; list_for_each_safe(l, n, final_queue) { cqr = list_entry(l, struct dasd_ccw_req, devlist); list_del_init(&cqr->devlist); block = cqr->block; - callback = cqr->callback; - callback_data = cqr->callback_data; - if (block) + if (!block) { + __dasd_process_cqr(device, cqr); + } else { spin_lock_bh(&block->queue_lock); - switch (cqr->status) { - case DASD_CQR_SUCCESS: - cqr->status = DASD_CQR_DONE; - break; - case DASD_CQR_ERROR: - cqr->status = DASD_CQR_NEED_ERP; - break; - case DASD_CQR_CLEARED: - cqr->status = DASD_CQR_TERMINATED; - break; - default: - /* internal error 12 - wrong cqr status*/ - snprintf(errorstring, ERRORLENGTH, "12 %p %x02", cqr, cqr->status); - dev_err(&device->cdev->dev, - "An error occurred in the DASD device driver, " - "reason=%s\n", errorstring); - BUG(); - } - if (cqr->callback != NULL) - (callback)(cqr, callback_data); - if (block) + __dasd_process_cqr(device, cqr); spin_unlock_bh(&block->queue_lock); + } } } @@ -3041,7 +2982,6 @@ static blk_status_t do_dasd_request(struct blk_mq_hw_ctx *hctx, cqr->callback_data = req; cqr->status = DASD_CQR_FILLED; cqr->dq = dq; - *((struct dasd_ccw_req **) blk_mq_rq_to_pdu(req)) = cqr; blk_mq_start_request(req); spin_lock(&block->queue_lock); @@ -3072,7 +3012,7 @@ enum blk_eh_timer_return dasd_times_out(struct request *req, bool reserved) unsigned long flags; int rc = 0; - cqr = *((struct dasd_ccw_req **) blk_mq_rq_to_pdu(req)); + cqr = blk_mq_rq_to_pdu(req); if (!cqr) return BLK_EH_DONE; @@ -3174,7 +3114,7 @@ static int dasd_alloc_queue(struct dasd_block *block) int rc; block->tag_set.ops = &dasd_mq_ops; - block->tag_set.cmd_size = sizeof(struct dasd_ccw_req *); + block->tag_set.cmd_size = sizeof(struct dasd_ccw_req); block->tag_set.nr_hw_queues = DASD_NR_HW_QUEUES; block->tag_set.queue_depth = DASD_MAX_LCU_DEV * DASD_REQ_PER_DEV; block->tag_set.flags = BLK_MQ_F_SHOULD_MERGE; @@ -4038,7 +3978,8 @@ static struct dasd_ccw_req *dasd_generic_build_rdc(struct dasd_device *device, struct ccw1 *ccw; unsigned long *idaw; - cqr = dasd_smalloc_request(magic, 1 /* RDC */, rdc_buffer_size, device); + cqr = dasd_smalloc_request(magic, 1 /* RDC */, rdc_buffer_size, device, + NULL); if (IS_ERR(cqr)) { /* internal error 13 - Allocating the RDC request failed*/ diff --git a/drivers/s390/block/dasd_alias.c b/drivers/s390/block/dasd_alias.c index 5e963fe0e38d..e36a114354fc 100644 --- a/drivers/s390/block/dasd_alias.c +++ b/drivers/s390/block/dasd_alias.c @@ -407,9 +407,9 @@ static int read_unit_address_configuration(struct dasd_device *device, int rc; unsigned long flags; - cqr = dasd_kmalloc_request(DASD_ECKD_MAGIC, 1 /* PSF */ + 1 /* RSSD */, + cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1 /* PSF */ + 1 /* RSSD */, (sizeof(struct dasd_psf_prssd_data)), - device); + device, NULL); if (IS_ERR(cqr)) return PTR_ERR(cqr); cqr->startdev = device; @@ -457,7 +457,7 @@ static int read_unit_address_configuration(struct dasd_device *device, lcu->flags |= NEED_UAC_UPDATE; spin_unlock_irqrestore(&lcu->lock, flags); } - dasd_kfree_request(cqr, cqr->memdev); + dasd_sfree_request(cqr, cqr->memdev); return rc; } diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c index 131f1989f6f3..e1fe02477ea8 100644 --- a/drivers/s390/block/dasd_diag.c +++ b/drivers/s390/block/dasd_diag.c @@ -536,7 +536,8 @@ static struct dasd_ccw_req *dasd_diag_build_cp(struct dasd_device *memdev, /* Build the request */ datasize = sizeof(struct dasd_diag_req) + count*sizeof(struct dasd_diag_bio); - cqr = dasd_smalloc_request(DASD_DIAG_MAGIC, 0, datasize, memdev); + cqr = dasd_smalloc_request(DASD_DIAG_MAGIC, 0, datasize, memdev, + blk_mq_rq_to_pdu(req)); if (IS_ERR(cqr)) return cqr; diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index be208e7adcb4..bbf95b78ef5d 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -886,7 +886,7 @@ static int dasd_eckd_read_conf_lpm(struct dasd_device *device, } cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1 /* RCD */, 0, /* use rcd_buf as data ara */ - device); + device, NULL); if (IS_ERR(cqr)) { DBF_DEV_EVENT(DBF_WARNING, device, "%s", "Could not allocate RCD request"); @@ -1442,7 +1442,7 @@ static int dasd_eckd_read_features(struct dasd_device *device) cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1 /* PSF */ + 1 /* RSSD */, (sizeof(struct dasd_psf_prssd_data) + sizeof(struct dasd_rssd_features)), - device); + device, NULL); if (IS_ERR(cqr)) { DBF_EVENT_DEVID(DBF_WARNING, device->cdev, "%s", "Could not " "allocate initialization request"); @@ -1504,7 +1504,7 @@ static struct dasd_ccw_req *dasd_eckd_build_psf_ssc(struct dasd_device *device, cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1 /* PSF */ , sizeof(struct dasd_psf_ssc_data), - device); + device, NULL); if (IS_ERR(cqr)) { DBF_DEV_EVENT(DBF_WARNING, device, "%s", @@ -1815,7 +1815,8 @@ dasd_eckd_analysis_ccw(struct dasd_device *device) cplength = 8; datasize = sizeof(struct DE_eckd_data) + 2*sizeof(struct LO_eckd_data); - cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, cplength, datasize, device); + cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, cplength, datasize, device, + NULL); if (IS_ERR(cqr)) return cqr; ccw = cqr->cpaddr; @@ -2092,7 +2093,8 @@ dasd_eckd_build_check_tcw(struct dasd_device *base, struct format_data_t *fdata, */ itcw_size = itcw_calc_size(0, count, 0); - cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 0, itcw_size, startdev); + cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 0, itcw_size, startdev, + NULL); if (IS_ERR(cqr)) return cqr; @@ -2186,7 +2188,7 @@ dasd_eckd_build_check(struct dasd_device *base, struct format_data_t *fdata, cplength += count; cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, cplength, datasize, - startdev); + startdev, NULL); if (IS_ERR(cqr)) return cqr; @@ -2332,7 +2334,7 @@ dasd_eckd_build_format(struct dasd_device *base, } /* Allocate the format ccw request. */ fcp = dasd_smalloc_request(DASD_ECKD_MAGIC, cplength, - datasize, startdev); + datasize, startdev, NULL); if (IS_ERR(fcp)) return fcp; @@ -3103,7 +3105,7 @@ static struct dasd_ccw_req *dasd_eckd_build_cp_cmd_single( } /* Allocate the ccw request. */ cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, cplength, datasize, - startdev); + startdev, blk_mq_rq_to_pdu(req)); if (IS_ERR(cqr)) return cqr; ccw = cqr->cpaddr; @@ -3262,7 +3264,7 @@ static struct dasd_ccw_req *dasd_eckd_build_cp_cmd_track( /* Allocate the ccw request. */ cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, cplength, datasize, - startdev); + startdev, blk_mq_rq_to_pdu(req)); if (IS_ERR(cqr)) return cqr; ccw = cqr->cpaddr; @@ -3595,7 +3597,8 @@ static struct dasd_ccw_req *dasd_eckd_build_cp_tpm_track( /* Allocate the ccw request. */ itcw_size = itcw_calc_size(0, ctidaw, 0); - cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 0, itcw_size, startdev); + cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 0, itcw_size, startdev, + blk_mq_rq_to_pdu(req)); if (IS_ERR(cqr)) return cqr; @@ -3862,7 +3865,7 @@ static struct dasd_ccw_req *dasd_eckd_build_cp_raw(struct dasd_device *startdev, /* Allocate the ccw request. */ cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, cplength, - datasize, startdev); + datasize, startdev, blk_mq_rq_to_pdu(req)); if (IS_ERR(cqr)) return cqr; @@ -4102,7 +4105,7 @@ dasd_eckd_release(struct dasd_device *device) return -EACCES; useglobal = 0; - cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1, 32, device); + cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1, 32, device, NULL); if (IS_ERR(cqr)) { mutex_lock(&dasd_reserve_mutex); useglobal = 1; @@ -4157,7 +4160,7 @@ dasd_eckd_reserve(struct dasd_device *device) return -EACCES; useglobal = 0; - cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1, 32, device); + cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1, 32, device, NULL); if (IS_ERR(cqr)) { mutex_lock(&dasd_reserve_mutex); useglobal = 1; @@ -4211,7 +4214,7 @@ dasd_eckd_steal_lock(struct dasd_device *device) return -EACCES; useglobal = 0; - cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1, 32, device); + cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1, 32, device, NULL); if (IS_ERR(cqr)) { mutex_lock(&dasd_reserve_mutex); useglobal = 1; @@ -4271,7 +4274,8 @@ static int dasd_eckd_snid(struct dasd_device *device, useglobal = 0; cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1, - sizeof(struct dasd_snid_data), device); + sizeof(struct dasd_snid_data), device, + NULL); if (IS_ERR(cqr)) { mutex_lock(&dasd_reserve_mutex); useglobal = 1; @@ -4331,7 +4335,7 @@ dasd_eckd_performance(struct dasd_device *device, void __user *argp) cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1 /* PSF */ + 1 /* RSSD */, (sizeof(struct dasd_psf_prssd_data) + sizeof(struct dasd_rssd_perf_stats_t)), - device); + device, NULL); if (IS_ERR(cqr)) { DBF_DEV_EVENT(DBF_WARNING, device, "%s", "Could not allocate initialization request"); @@ -4477,7 +4481,7 @@ static int dasd_symm_io(struct dasd_device *device, void __user *argp) psf1 = psf_data[1]; /* setup CCWs for PSF + RSSD */ - cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 2 , 0, device); + cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 2, 0, device, NULL); if (IS_ERR(cqr)) { DBF_DEV_EVENT(DBF_WARNING, device, "%s", "Could not allocate initialization request"); @@ -5037,7 +5041,7 @@ static int dasd_eckd_read_message_buffer(struct dasd_device *device, cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1 /* PSF */ + 1 /* RSSD */, (sizeof(struct dasd_psf_prssd_data) + sizeof(struct dasd_rssd_messages)), - device); + device, NULL); if (IS_ERR(cqr)) { DBF_EVENT_DEVID(DBF_WARNING, device->cdev, "%s", "Could not allocate read message buffer request"); @@ -5126,7 +5130,7 @@ static int dasd_eckd_query_host_access(struct dasd_device *device, cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1 /* PSF */ + 1 /* RSSD */, sizeof(struct dasd_psf_prssd_data) + 1, - device); + device, NULL); if (IS_ERR(cqr)) { DBF_EVENT_DEVID(DBF_WARNING, device->cdev, "%s", "Could not allocate read message buffer request"); @@ -5284,8 +5288,8 @@ dasd_eckd_psf_cuir_response(struct dasd_device *device, int response, int rc; cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1 /* PSF */ , - sizeof(struct dasd_psf_cuir_response), - device); + sizeof(struct dasd_psf_cuir_response), + device, NULL); if (IS_ERR(cqr)) { DBF_DEV_EVENT(DBF_WARNING, device, "%s", diff --git a/drivers/s390/block/dasd_eer.c b/drivers/s390/block/dasd_eer.c index 0af8c5295b65..6ef8714dc693 100644 --- a/drivers/s390/block/dasd_eer.c +++ b/drivers/s390/block/dasd_eer.c @@ -447,7 +447,7 @@ static void dasd_eer_snss_cb(struct dasd_ccw_req *cqr, void *data) * is a new ccw in device->eer_cqr. Free the "old" * snss request now. */ - dasd_kfree_request(cqr, device); + dasd_sfree_request(cqr, device); } /* @@ -472,8 +472,8 @@ int dasd_eer_enable(struct dasd_device *device) if (rc) goto out; - cqr = dasd_kmalloc_request(DASD_ECKD_MAGIC, 1 /* SNSS */, - SNSS_DATA_SIZE, device); + cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1 /* SNSS */, + SNSS_DATA_SIZE, device, NULL); if (IS_ERR(cqr)) { rc = -ENOMEM; cqr = NULL; @@ -505,7 +505,7 @@ out: spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags); if (cqr) - dasd_kfree_request(cqr, device); + dasd_sfree_request(cqr, device); return rc; } @@ -528,7 +528,7 @@ void dasd_eer_disable(struct dasd_device *device) in_use = test_and_clear_bit(DASD_FLAG_EER_IN_USE, &device->flags); spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags); if (cqr && !in_use) - dasd_kfree_request(cqr, device); + dasd_sfree_request(cqr, device); } /* diff --git a/drivers/s390/block/dasd_fba.c b/drivers/s390/block/dasd_fba.c index a6b132f7e869..56007a3e7f11 100644 --- a/drivers/s390/block/dasd_fba.c +++ b/drivers/s390/block/dasd_fba.c @@ -356,7 +356,8 @@ static struct dasd_ccw_req *dasd_fba_build_cp_discard( datasize = sizeof(struct DE_fba_data) + nr_ccws * (sizeof(struct LO_fba_data) + sizeof(struct ccw1)); - cqr = dasd_smalloc_request(DASD_FBA_MAGIC, cplength, datasize, memdev); + cqr = dasd_smalloc_request(DASD_FBA_MAGIC, cplength, datasize, memdev, + blk_mq_rq_to_pdu(req)); if (IS_ERR(cqr)) return cqr; @@ -490,7 +491,8 @@ static struct dasd_ccw_req *dasd_fba_build_cp_regular( datasize += (count - 1)*sizeof(struct LO_fba_data); } /* Allocate the ccw request. */ - cqr = dasd_smalloc_request(DASD_FBA_MAGIC, cplength, datasize, memdev); + cqr = dasd_smalloc_request(DASD_FBA_MAGIC, cplength, datasize, memdev, + blk_mq_rq_to_pdu(req)); if (IS_ERR(cqr)) return cqr; ccw = cqr->cpaddr; diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h index 96709b1a7bf8..976b6bd4fb05 100644 --- a/drivers/s390/block/dasd_int.h +++ b/drivers/s390/block/dasd_int.h @@ -158,40 +158,33 @@ do { \ struct dasd_ccw_req { unsigned int magic; /* Eye catcher */ + int intrc; /* internal error, e.g. from start_IO */ struct list_head devlist; /* for dasd_device request queue */ struct list_head blocklist; /* for dasd_block request queue */ - - /* Where to execute what... */ struct dasd_block *block; /* the originating block device */ struct dasd_device *memdev; /* the device used to allocate this */ struct dasd_device *startdev; /* device the request is started on */ struct dasd_device *basedev; /* base device if no block->base */ void *cpaddr; /* address of ccw or tcw */ + short retries; /* A retry counter */ unsigned char cpmode; /* 0 = cmd mode, 1 = itcw */ char status; /* status of this request */ - short retries; /* A retry counter */ + char lpm; /* logical path mask */ unsigned long flags; /* flags of this request */ struct dasd_queue *dq; - - /* ... and how */ unsigned long starttime; /* jiffies time of request start */ unsigned long expires; /* expiration period in jiffies */ - char lpm; /* logical path mask */ void *data; /* pointer to data area */ - - /* these are important for recovering erroneous requests */ - int intrc; /* internal error, e.g. from start_IO */ struct irb irb; /* device status in case of an error */ struct dasd_ccw_req *refers; /* ERP-chain queueing. */ void *function; /* originating ERP action */ + void *mem_chunk; - /* these are for statistics only */ unsigned long buildclk; /* TOD-clock of request generation */ unsigned long startclk; /* TOD-clock of request start */ unsigned long stopclk; /* TOD-clock of request interrupt */ unsigned long endclk; /* TOD-clock of request termination */ - /* Callback that is called after reaching final status. */ void (*callback)(struct dasd_ccw_req *, void *data); void *callback_data; }; @@ -714,19 +707,10 @@ extern const struct block_device_operations dasd_device_operations; extern struct kmem_cache *dasd_page_cache; struct dasd_ccw_req * -dasd_kmalloc_request(int , int, int, struct dasd_device *); -struct dasd_ccw_req * -dasd_smalloc_request(int , int, int, struct dasd_device *); -void dasd_kfree_request(struct dasd_ccw_req *, struct dasd_device *); +dasd_smalloc_request(int, int, int, struct dasd_device *, struct dasd_ccw_req *); void dasd_sfree_request(struct dasd_ccw_req *, struct dasd_device *); void dasd_wakeup_cb(struct dasd_ccw_req *, void *); -static inline int -dasd_kmalloc_set_cda(struct ccw1 *ccw, void *cda, struct dasd_device *device) -{ - return set_normalized_cda(ccw, cda); -} - struct dasd_device *dasd_alloc_device(void); void dasd_free_device(struct dasd_device *); diff --git a/drivers/s390/cio/Makefile b/drivers/s390/cio/Makefile index a070ef0efe65..f230516abb96 100644 --- a/drivers/s390/cio/Makefile +++ b/drivers/s390/cio/Makefile @@ -5,6 +5,7 @@ # The following is required for define_trace.h to find ./trace.h CFLAGS_trace.o := -I$(src) +CFLAGS_vfio_ccw_fsm.o := -I$(src) obj-y += airq.o blacklist.o chsc.o cio.o css.o chp.o idset.o isc.o \ fcx.o itcw.o crw.o ccwreq.o trace.o ioasm.o diff --git a/drivers/s390/cio/vfio_ccw_cp.c b/drivers/s390/cio/vfio_ccw_cp.c index dce92b2a895d..dbe7c7ac9ac8 100644 --- a/drivers/s390/cio/vfio_ccw_cp.c +++ b/drivers/s390/cio/vfio_ccw_cp.c @@ -23,9 +23,13 @@ #define CCWCHAIN_LEN_MAX 256 struct pfn_array { + /* Starting guest physical I/O address. */ unsigned long pa_iova; + /* Array that stores PFNs of the pages need to pin. */ unsigned long *pa_iova_pfn; + /* Array that receives PFNs of the pages pinned. */ unsigned long *pa_pfn; + /* Number of pages pinned from @pa_iova. */ int pa_nr; }; @@ -46,70 +50,33 @@ struct ccwchain { }; /* - * pfn_array_pin() - pin user pages in memory + * pfn_array_alloc_pin() - alloc memory for PFNs, then pin user pages in memory * @pa: pfn_array on which to perform the operation * @mdev: the mediated device to perform pin/unpin operations + * @iova: target guest physical address + * @len: number of bytes that should be pinned from @iova * - * Attempt to pin user pages in memory. + * Attempt to allocate memory for PFNs, and pin user pages in memory. * * Usage of pfn_array: - * @pa->pa_iova starting guest physical I/O address. Assigned by caller. - * @pa->pa_iova_pfn array that stores PFNs of the pages need to pin. Allocated - * by caller. - * @pa->pa_pfn array that receives PFNs of the pages pinned. Allocated by - * caller. - * @pa->pa_nr number of pages from @pa->pa_iova to pin. Assigned by - * caller. - * number of pages pinned. Assigned by callee. + * We expect (pa_nr == 0) and (pa_iova_pfn == NULL), any field in + * this structure will be filled in by this function. * * Returns: * Number of pages pinned on success. - * If @pa->pa_nr is 0 or negative, returns 0. + * If @pa->pa_nr is not 0, or @pa->pa_iova_pfn is not NULL initially, + * returns -EINVAL. * If no pages were pinned, returns -errno. */ -static int pfn_array_pin(struct pfn_array *pa, struct device *mdev) -{ - int i, ret; - - if (pa->pa_nr <= 0) { - pa->pa_nr = 0; - return 0; - } - - pa->pa_iova_pfn[0] = pa->pa_iova >> PAGE_SHIFT; - for (i = 1; i < pa->pa_nr; i++) - pa->pa_iova_pfn[i] = pa->pa_iova_pfn[i - 1] + 1; - - ret = vfio_pin_pages(mdev, pa->pa_iova_pfn, pa->pa_nr, - IOMMU_READ | IOMMU_WRITE, pa->pa_pfn); - - if (ret > 0 && ret != pa->pa_nr) { - vfio_unpin_pages(mdev, pa->pa_iova_pfn, ret); - pa->pa_nr = 0; - return 0; - } - - return ret; -} - -/* Unpin the pages before releasing the memory. */ -static void pfn_array_unpin_free(struct pfn_array *pa, struct device *mdev) -{ - vfio_unpin_pages(mdev, pa->pa_iova_pfn, pa->pa_nr); - pa->pa_nr = 0; - kfree(pa->pa_iova_pfn); -} - -/* Alloc memory for PFNs, then pin pages with them. */ static int pfn_array_alloc_pin(struct pfn_array *pa, struct device *mdev, u64 iova, unsigned int len) { - int ret = 0; + int i, ret = 0; if (!len) return 0; - if (pa->pa_nr) + if (pa->pa_nr || pa->pa_iova_pfn) return -EINVAL; pa->pa_iova = iova; @@ -126,18 +93,39 @@ static int pfn_array_alloc_pin(struct pfn_array *pa, struct device *mdev, return -ENOMEM; pa->pa_pfn = pa->pa_iova_pfn + pa->pa_nr; - ret = pfn_array_pin(pa, mdev); + pa->pa_iova_pfn[0] = pa->pa_iova >> PAGE_SHIFT; + for (i = 1; i < pa->pa_nr; i++) + pa->pa_iova_pfn[i] = pa->pa_iova_pfn[i - 1] + 1; - if (ret > 0) - return ret; - else if (!ret) + ret = vfio_pin_pages(mdev, pa->pa_iova_pfn, pa->pa_nr, + IOMMU_READ | IOMMU_WRITE, pa->pa_pfn); + + if (ret < 0) { + goto err_out; + } else if (ret > 0 && ret != pa->pa_nr) { + vfio_unpin_pages(mdev, pa->pa_iova_pfn, ret); ret = -EINVAL; + goto err_out; + } + return ret; + +err_out: + pa->pa_nr = 0; kfree(pa->pa_iova_pfn); + pa->pa_iova_pfn = NULL; return ret; } +/* Unpin the pages before releasing the memory. */ +static void pfn_array_unpin_free(struct pfn_array *pa, struct device *mdev) +{ + vfio_unpin_pages(mdev, pa->pa_iova_pfn, pa->pa_nr); + pa->pa_nr = 0; + kfree(pa->pa_iova_pfn); +} + static int pfn_array_table_init(struct pfn_array_table *pat, int nr) { pat->pat_pa = kcalloc(nr, sizeof(*pat->pat_pa), GFP_KERNEL); @@ -365,6 +353,9 @@ static void cp_unpin_free(struct channel_program *cp) * This is the chain length not considering any TICs. * You need to do a new round for each TIC target. * + * The program is also validated for absence of not yet supported + * indirect data addressing scenarios. + * * Returns: the length of the ccw chain or -errno. */ static int ccwchain_calc_length(u64 iova, struct channel_program *cp) @@ -391,6 +382,14 @@ static int ccwchain_calc_length(u64 iova, struct channel_program *cp) do { cnt++; + /* + * As we don't want to fail direct addressing even if the + * orb specified one of the unsupported formats, we defer + * checking for IDAWs in unsupported formats to here. + */ + if ((!cp->orb.cmd.c64 || cp->orb.cmd.i2k) && ccw_is_idal(ccw)) + return -EOPNOTSUPP; + if ((!ccw_is_chain(ccw)) && (!ccw_is_tic(ccw))) break; @@ -503,7 +502,7 @@ static int ccwchain_fetch_direct(struct ccwchain *chain, struct ccw1 *ccw; struct pfn_array_table *pat; unsigned long *idaws; - int idaw_nr; + int ret; ccw = chain->ch_ccw + idx; @@ -523,18 +522,19 @@ static int ccwchain_fetch_direct(struct ccwchain *chain, * needed when translating a direct ccw to a idal ccw. */ pat = chain->ch_pat + idx; - if (pfn_array_table_init(pat, 1)) - return -ENOMEM; - idaw_nr = pfn_array_alloc_pin(pat->pat_pa, cp->mdev, - ccw->cda, ccw->count); - if (idaw_nr < 0) - return idaw_nr; + ret = pfn_array_table_init(pat, 1); + if (ret) + goto out_init; + + ret = pfn_array_alloc_pin(pat->pat_pa, cp->mdev, ccw->cda, ccw->count); + if (ret < 0) + goto out_init; /* Translate this direct ccw to a idal ccw. */ - idaws = kcalloc(idaw_nr, sizeof(*idaws), GFP_DMA | GFP_KERNEL); + idaws = kcalloc(ret, sizeof(*idaws), GFP_DMA | GFP_KERNEL); if (!idaws) { - pfn_array_table_unpin_free(pat, cp->mdev); - return -ENOMEM; + ret = -ENOMEM; + goto out_unpin; } ccw->cda = (__u32) virt_to_phys(idaws); ccw->flags |= CCW_FLAG_IDA; @@ -542,6 +542,12 @@ static int ccwchain_fetch_direct(struct ccwchain *chain, pfn_array_table_idal_create_words(pat, idaws); return 0; + +out_unpin: + pfn_array_table_unpin_free(pat, cp->mdev); +out_init: + ccw->cda = 0; + return ret; } static int ccwchain_fetch_idal(struct ccwchain *chain, @@ -571,7 +577,7 @@ static int ccwchain_fetch_idal(struct ccwchain *chain, pat = chain->ch_pat + idx; ret = pfn_array_table_init(pat, idaw_nr); if (ret) - return ret; + goto out_init; /* Translate idal ccw to use new allocated idaws. */ idaws = kzalloc(idaw_len, GFP_DMA | GFP_KERNEL); @@ -603,6 +609,8 @@ out_free_idaws: kfree(idaws); out_unpin: pfn_array_table_unpin_free(pat, cp->mdev); +out_init: + ccw->cda = 0; return ret; } @@ -656,10 +664,8 @@ int cp_init(struct channel_program *cp, struct device *mdev, union orb *orb) /* * XXX: * Only support prefetch enable mode now. - * Only support 64bit addressing idal. - * Only support 4k IDAW. */ - if (!orb->cmd.pfch || !orb->cmd.c64 || orb->cmd.i2k) + if (!orb->cmd.pfch) return -EOPNOTSUPP; INIT_LIST_HEAD(&cp->ccwchain_list); @@ -688,6 +694,10 @@ int cp_init(struct channel_program *cp, struct device *mdev, union orb *orb) ret = ccwchain_loop_tic(chain, cp); if (ret) cp_unpin_free(cp); + /* It is safe to force: if not set but idals used + * ccwchain_calc_length returns an error. + */ + cp->orb.cmd.c64 = 1; return ret; } diff --git a/drivers/s390/cio/vfio_ccw_drv.c b/drivers/s390/cio/vfio_ccw_drv.c index ea6a2d0b2894..770fa9cfc310 100644 --- a/drivers/s390/cio/vfio_ccw_drv.c +++ b/drivers/s390/cio/vfio_ccw_drv.c @@ -177,6 +177,7 @@ static int vfio_ccw_sch_event(struct subchannel *sch, int process) { struct vfio_ccw_private *private = dev_get_drvdata(&sch->dev); unsigned long flags; + int rc = -EAGAIN; spin_lock_irqsave(sch->lock, flags); if (!device_is_registered(&sch->dev)) @@ -187,6 +188,7 @@ static int vfio_ccw_sch_event(struct subchannel *sch, int process) if (cio_update_schib(sch)) { vfio_ccw_fsm_event(private, VFIO_CCW_EVENT_NOT_OPER); + rc = 0; goto out_unlock; } @@ -195,11 +197,12 @@ static int vfio_ccw_sch_event(struct subchannel *sch, int process) private->state = private->mdev ? VFIO_CCW_STATE_IDLE : VFIO_CCW_STATE_STANDBY; } + rc = 0; out_unlock: spin_unlock_irqrestore(sch->lock, flags); - return 0; + return rc; } static struct css_device_id vfio_ccw_sch_ids[] = { diff --git a/drivers/s390/cio/vfio_ccw_fsm.c b/drivers/s390/cio/vfio_ccw_fsm.c index 3c800642134e..797a82731159 100644 --- a/drivers/s390/cio/vfio_ccw_fsm.c +++ b/drivers/s390/cio/vfio_ccw_fsm.c @@ -13,6 +13,9 @@ #include "ioasm.h" #include "vfio_ccw_private.h" +#define CREATE_TRACE_POINTS +#include "vfio_ccw_trace.h" + static int fsm_io_helper(struct vfio_ccw_private *private) { struct subchannel *sch; @@ -110,6 +113,10 @@ static void fsm_disabled_irq(struct vfio_ccw_private *private, */ cio_disable_subchannel(sch); } +inline struct subchannel_id get_schid(struct vfio_ccw_private *p) +{ + return p->sch->schid; +} /* * Deal with the ccw command request from the userspace. @@ -121,6 +128,7 @@ static void fsm_io_request(struct vfio_ccw_private *private, union scsw *scsw = &private->scsw; struct ccw_io_region *io_region = &private->io_region; struct mdev_device *mdev = private->mdev; + char *errstr = "request"; private->state = VFIO_CCW_STATE_BOXED; @@ -132,15 +140,19 @@ static void fsm_io_request(struct vfio_ccw_private *private, /* Don't try to build a cp if transport mode is specified. */ if (orb->tm.b) { io_region->ret_code = -EOPNOTSUPP; + errstr = "transport mode"; goto err_out; } io_region->ret_code = cp_init(&private->cp, mdev_dev(mdev), orb); - if (io_region->ret_code) + if (io_region->ret_code) { + errstr = "cp init"; goto err_out; + } io_region->ret_code = cp_prefetch(&private->cp); if (io_region->ret_code) { + errstr = "cp prefetch"; cp_free(&private->cp); goto err_out; } @@ -148,6 +160,7 @@ static void fsm_io_request(struct vfio_ccw_private *private, /* Start channel program and wait for I/O interrupt. */ io_region->ret_code = fsm_io_helper(private); if (io_region->ret_code) { + errstr = "cp fsm_io_helper"; cp_free(&private->cp); goto err_out; } @@ -164,6 +177,8 @@ static void fsm_io_request(struct vfio_ccw_private *private, err_out: private->state = VFIO_CCW_STATE_IDLE; + trace_vfio_ccw_io_fctl(scsw->cmd.fctl, get_schid(private), + io_region->ret_code, errstr); } /* diff --git a/drivers/s390/cio/vfio_ccw_trace.h b/drivers/s390/cio/vfio_ccw_trace.h new file mode 100644 index 000000000000..b1da53ddec1f --- /dev/null +++ b/drivers/s390/cio/vfio_ccw_trace.h @@ -0,0 +1,54 @@ +/* SPDX-License-Identifier: GPL-2.0 + * Tracepoints for vfio_ccw driver + * + * Copyright IBM Corp. 2018 + * + * Author(s): Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> + * Halil Pasic <pasic@linux.vnet.ibm.com> + */ + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM vfio_ccw + +#if !defined(_VFIO_CCW_TRACE_) || defined(TRACE_HEADER_MULTI_READ) +#define _VFIO_CCW_TRACE_ + +#include <linux/tracepoint.h> + +TRACE_EVENT(vfio_ccw_io_fctl, + TP_PROTO(int fctl, struct subchannel_id schid, int errno, char *errstr), + TP_ARGS(fctl, schid, errno, errstr), + + TP_STRUCT__entry( + __field(int, fctl) + __field_struct(struct subchannel_id, schid) + __field(int, errno) + __field(char*, errstr) + ), + + TP_fast_assign( + __entry->fctl = fctl; + __entry->schid = schid; + __entry->errno = errno; + __entry->errstr = errstr; + ), + + TP_printk("schid=%x.%x.%04x fctl=%x errno=%d info=%s", + __entry->schid.cssid, + __entry->schid.ssid, + __entry->schid.sch_no, + __entry->fctl, + __entry->errno, + __entry->errstr) +); + +#endif /* _VFIO_CCW_TRACE_ */ + +/* This part must be outside protection */ + +#undef TRACE_INCLUDE_PATH +#define TRACE_INCLUDE_PATH . +#undef TRACE_INCLUDE_FILE +#define TRACE_INCLUDE_FILE vfio_ccw_trace + +#include <trace/define_trace.h> diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 0a9b8b387bd2..02d65dce74e5 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -760,7 +760,6 @@ static void ipr_mask_and_clear_interrupts(struct ipr_ioa_cfg *ioa_cfg, ioa_cfg->hrrq[i].allow_interrupts = 0; spin_unlock(&ioa_cfg->hrrq[i]._lock); } - wmb(); /* Set interrupt mask to stop all new interrupts */ if (ioa_cfg->sis64) @@ -8403,7 +8402,6 @@ static int ipr_reset_enable_ioa(struct ipr_cmnd *ipr_cmd) ioa_cfg->hrrq[i].allow_interrupts = 1; spin_unlock(&ioa_cfg->hrrq[i]._lock); } - wmb(); if (ioa_cfg->sis64) { /* Set the adapter to the correct endian mode. */ writel(IPR_ENDIAN_SWAP_KEY, ioa_cfg->regs.endian_swap_reg); diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index 0fea2e2326be..1027b0cb7fa3 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -1224,7 +1224,6 @@ static void qla24xx_chk_fcp_state(struct fc_port *sess) void qlt_schedule_sess_for_deletion(struct fc_port *sess) { struct qla_tgt *tgt = sess->tgt; - struct qla_hw_data *ha = sess->vha->hw; unsigned long flags; if (sess->disc_state == DSC_DELETE_PEND) @@ -1241,16 +1240,16 @@ void qlt_schedule_sess_for_deletion(struct fc_port *sess) return; } - spin_lock_irqsave(&ha->tgt.sess_lock, flags); if (sess->deleted == QLA_SESS_DELETED) sess->logout_on_delete = 0; + spin_lock_irqsave(&sess->vha->work_lock, flags); if (sess->deleted == QLA_SESS_DELETION_IN_PROGRESS) { - spin_unlock_irqrestore(&ha->tgt.sess_lock, flags); + spin_unlock_irqrestore(&sess->vha->work_lock, flags); return; } sess->deleted = QLA_SESS_DELETION_IN_PROGRESS; - spin_unlock_irqrestore(&ha->tgt.sess_lock, flags); + spin_unlock_irqrestore(&sess->vha->work_lock, flags); sess->disc_state = DSC_DELETE_PEND; diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index 24d7496cd9e2..364e71861bfd 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -5507,9 +5507,9 @@ static void __exit scsi_debug_exit(void) int k = sdebug_add_host; stop_all_queued(); - free_all_queued(); for (; k; k--) sdebug_remove_adapter(); + free_all_queued(); driver_unregister(&sdebug_driverfs_driver); bus_unregister(&pseudo_lld_bus); root_device_unregister(pseudo_primary); diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index 1da3d71e9f61..13948102ca29 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -3592,7 +3592,7 @@ fc_bsg_job_timeout(struct request *req) /* the blk_end_sync_io() doesn't check the error */ if (inflight) - blk_mq_complete_request(req); + __blk_complete_request(req); return BLK_EH_DONE; } diff --git a/drivers/scsi/xen-scsifront.c b/drivers/scsi/xen-scsifront.c index 36f59a1be7e9..61389bdc7926 100644 --- a/drivers/scsi/xen-scsifront.c +++ b/drivers/scsi/xen-scsifront.c @@ -654,10 +654,17 @@ static int scsifront_dev_reset_handler(struct scsi_cmnd *sc) static int scsifront_sdev_configure(struct scsi_device *sdev) { struct vscsifrnt_info *info = shost_priv(sdev->host); + int err; - if (info && current == info->curr) - xenbus_printf(XBT_NIL, info->dev->nodename, + if (info && current == info->curr) { + err = xenbus_printf(XBT_NIL, info->dev->nodename, info->dev_state_path, "%d", XenbusStateConnected); + if (err) { + xenbus_dev_error(info->dev, err, + "%s: writing dev_state_path", __func__); + return err; + } + } return 0; } @@ -665,10 +672,15 @@ static int scsifront_sdev_configure(struct scsi_device *sdev) static void scsifront_sdev_destroy(struct scsi_device *sdev) { struct vscsifrnt_info *info = shost_priv(sdev->host); + int err; - if (info && current == info->curr) - xenbus_printf(XBT_NIL, info->dev->nodename, + if (info && current == info->curr) { + err = xenbus_printf(XBT_NIL, info->dev->nodename, info->dev_state_path, "%d", XenbusStateClosed); + if (err) + xenbus_dev_error(info->dev, err, + "%s: writing dev_state_path", __func__); + } } static struct scsi_host_template scsifront_sht = { @@ -1003,9 +1015,12 @@ static void scsifront_do_lun_hotplug(struct vscsifrnt_info *info, int op) if (scsi_add_device(info->host, chn, tgt, lun)) { dev_err(&dev->dev, "scsi_add_device\n"); - xenbus_printf(XBT_NIL, dev->nodename, + err = xenbus_printf(XBT_NIL, dev->nodename, info->dev_state_path, "%d", XenbusStateClosed); + if (err) + xenbus_dev_error(dev, err, + "%s: writing dev_state_path", __func__); } break; case VSCSIFRONT_OP_DEL_LUN: @@ -1019,10 +1034,14 @@ static void scsifront_do_lun_hotplug(struct vscsifrnt_info *info, int op) } break; case VSCSIFRONT_OP_READD_LUN: - if (device_state == XenbusStateConnected) - xenbus_printf(XBT_NIL, dev->nodename, + if (device_state == XenbusStateConnected) { + err = xenbus_printf(XBT_NIL, dev->nodename, info->dev_state_path, "%d", XenbusStateConnected); + if (err) + xenbus_dev_error(dev, err, + "%s: writing dev_state_path", __func__); + } break; default: break; diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c index f4e3bd40c72e..6ef18cf8f243 100644 --- a/drivers/soc/imx/gpcv2.c +++ b/drivers/soc/imx/gpcv2.c @@ -39,10 +39,15 @@ #define GPC_M4_PU_PDN_FLG 0x1bc - -#define PGC_MIPI 4 -#define PGC_PCIE 5 -#define PGC_USB_HSIC 8 +/* + * The PGC offset values in Reference Manual + * (Rev. 1, 01/2018 and the older ones) GPC chapter's + * GPC_PGC memory map are incorrect, below offset + * values are from design RTL. + */ +#define PGC_MIPI 16 +#define PGC_PCIE 17 +#define PGC_USB_HSIC 20 #define GPC_PGC_CTRL(n) (0x800 + (n) * 0x40) #define GPC_PGC_SR(n) (GPC_PGC_CTRL(n) + 0xc) diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig index 9dc02f390ba3..5856e792d09c 100644 --- a/drivers/soc/qcom/Kconfig +++ b/drivers/soc/qcom/Kconfig @@ -5,7 +5,8 @@ menu "Qualcomm SoC drivers" config QCOM_COMMAND_DB bool "Qualcomm Command DB" - depends on (ARCH_QCOM && OF) || COMPILE_TEST + depends on ARCH_QCOM || COMPILE_TEST + depends on OF_RESERVED_MEM help Command DB queries shared memory by key string for shared system resources. Platform drivers that require to set state of a shared diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c index 95120acc4d80..50d03d8b4f9a 100644 --- a/drivers/soc/renesas/rcar-sysc.c +++ b/drivers/soc/renesas/rcar-sysc.c @@ -194,11 +194,12 @@ static int rcar_sysc_pd_power_on(struct generic_pm_domain *genpd) static bool has_cpg_mstp; -static void __init rcar_sysc_pd_setup(struct rcar_sysc_pd *pd) +static int __init rcar_sysc_pd_setup(struct rcar_sysc_pd *pd) { struct generic_pm_domain *genpd = &pd->genpd; const char *name = pd->genpd.name; struct dev_power_governor *gov = &simple_qos_governor; + int error; if (pd->flags & PD_CPU) { /* @@ -251,7 +252,11 @@ static void __init rcar_sysc_pd_setup(struct rcar_sysc_pd *pd) rcar_sysc_power_up(&pd->ch); finalize: - pm_genpd_init(genpd, gov, false); + error = pm_genpd_init(genpd, gov, false); + if (error) + pr_err("Failed to init PM domain %s: %d\n", name, error); + + return error; } static const struct of_device_id rcar_sysc_matches[] __initconst = { @@ -375,6 +380,9 @@ static int __init rcar_sysc_pd_init(void) pr_debug("%pOF: syscier = 0x%08x\n", np, syscier); iowrite32(syscier, base + SYSCIER); + /* + * First, create all PM domains + */ for (i = 0; i < info->num_areas; i++) { const struct rcar_sysc_area *area = &info->areas[i]; struct rcar_sysc_pd *pd; @@ -397,14 +405,29 @@ static int __init rcar_sysc_pd_init(void) pd->ch.isr_bit = area->isr_bit; pd->flags = area->flags; - rcar_sysc_pd_setup(pd); - if (area->parent >= 0) - pm_genpd_add_subdomain(domains->domains[area->parent], - &pd->genpd); + error = rcar_sysc_pd_setup(pd); + if (error) + goto out_put; domains->domains[area->isr_bit] = &pd->genpd; } + /* + * Second, link all PM domains to their parents + */ + for (i = 0; i < info->num_areas; i++) { + const struct rcar_sysc_area *area = &info->areas[i]; + + if (!area->name || area->parent < 0) + continue; + + error = pm_genpd_add_subdomain(domains->domains[area->parent], + domains->domains[area->isr_bit]); + if (error) + pr_warn("Failed to add PM subdomain %s to parent %u\n", + area->name, area->parent); + } + error = of_genpd_add_provider_onecell(np, &domains->onecell_data); out_put: diff --git a/drivers/soc/ti/Kconfig b/drivers/soc/ti/Kconfig index 92770d84a288..be4570baad96 100644 --- a/drivers/soc/ti/Kconfig +++ b/drivers/soc/ti/Kconfig @@ -1,3 +1,17 @@ +# 64-bit ARM SoCs from TI +if ARM64 + +if ARCH_K3 + +config ARCH_K3_AM6_SOC + bool "K3 AM6 SoC" + help + Enable support for TI's AM6 SoC Family support + +endif + +endif + # # TI SOC drivers # diff --git a/drivers/staging/android/ion/ion_heap.c b/drivers/staging/android/ion/ion_heap.c index e8c440329708..31db510018a9 100644 --- a/drivers/staging/android/ion/ion_heap.c +++ b/drivers/staging/android/ion/ion_heap.c @@ -30,7 +30,7 @@ void *ion_heap_map_kernel(struct ion_heap *heap, struct page **tmp = pages; if (!pages) - return NULL; + return ERR_PTR(-ENOMEM); if (buffer->flags & ION_FLAG_CACHED) pgprot = PAGE_KERNEL; diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c index ea194aa01a64..257b0daff01f 100644 --- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c +++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c @@ -642,7 +642,7 @@ static int daqp_ao_insn_write(struct comedi_device *dev, /* Make sure D/A update mode is direct update */ outb(0, dev->iobase + DAQP_AUX_REG); - for (i = 0; i > insn->n; i++) { + for (i = 0; i < insn->n; i++) { unsigned int val = data[i]; int ret; diff --git a/drivers/staging/typec/Kconfig b/drivers/staging/typec/Kconfig index 3aa981fbc8f5..e45ed08a5166 100644 --- a/drivers/staging/typec/Kconfig +++ b/drivers/staging/typec/Kconfig @@ -11,6 +11,7 @@ config TYPEC_TCPCI config TYPEC_RT1711H tristate "Richtek RT1711H Type-C chip driver" + depends on I2C select TYPEC_TCPCI help Richtek RT1711H Type-C chip driver that works with diff --git a/drivers/target/target_core_user.c b/drivers/target/target_core_user.c index 7f96dfa32b9c..d8dc3d22051f 100644 --- a/drivers/target/target_core_user.c +++ b/drivers/target/target_core_user.c @@ -656,7 +656,7 @@ static void scatter_data_area(struct tcmu_dev *udev, } static void gather_data_area(struct tcmu_dev *udev, struct tcmu_cmd *cmd, - bool bidi) + bool bidi, uint32_t read_len) { struct se_cmd *se_cmd = cmd->se_cmd; int i, dbi; @@ -689,7 +689,7 @@ static void gather_data_area(struct tcmu_dev *udev, struct tcmu_cmd *cmd, for_each_sg(data_sg, sg, data_nents, i) { int sg_remaining = sg->length; to = kmap_atomic(sg_page(sg)) + sg->offset; - while (sg_remaining > 0) { + while (sg_remaining > 0 && read_len > 0) { if (block_remaining == 0) { if (from) kunmap_atomic(from); @@ -701,6 +701,8 @@ static void gather_data_area(struct tcmu_dev *udev, struct tcmu_cmd *cmd, } copy_bytes = min_t(size_t, sg_remaining, block_remaining); + if (read_len < copy_bytes) + copy_bytes = read_len; offset = DATA_BLOCK_SIZE - block_remaining; tcmu_flush_dcache_range(from, copy_bytes); memcpy(to + sg->length - sg_remaining, from + offset, @@ -708,8 +710,11 @@ static void gather_data_area(struct tcmu_dev *udev, struct tcmu_cmd *cmd, sg_remaining -= copy_bytes; block_remaining -= copy_bytes; + read_len -= copy_bytes; } kunmap_atomic(to - sg->offset); + if (read_len == 0) + break; } if (from) kunmap_atomic(from); @@ -1042,6 +1047,8 @@ static void tcmu_handle_completion(struct tcmu_cmd *cmd, struct tcmu_cmd_entry * { struct se_cmd *se_cmd = cmd->se_cmd; struct tcmu_dev *udev = cmd->tcmu_dev; + bool read_len_valid = false; + uint32_t read_len = se_cmd->data_length; /* * cmd has been completed already from timeout, just reclaim @@ -1056,13 +1063,28 @@ static void tcmu_handle_completion(struct tcmu_cmd *cmd, struct tcmu_cmd_entry * pr_warn("TCMU: Userspace set UNKNOWN_OP flag on se_cmd %p\n", cmd->se_cmd); entry->rsp.scsi_status = SAM_STAT_CHECK_CONDITION; - } else if (entry->rsp.scsi_status == SAM_STAT_CHECK_CONDITION) { + goto done; + } + + if (se_cmd->data_direction == DMA_FROM_DEVICE && + (entry->hdr.uflags & TCMU_UFLAG_READ_LEN) && entry->rsp.read_len) { + read_len_valid = true; + if (entry->rsp.read_len < read_len) + read_len = entry->rsp.read_len; + } + + if (entry->rsp.scsi_status == SAM_STAT_CHECK_CONDITION) { transport_copy_sense_to_cmd(se_cmd, entry->rsp.sense_buffer); - } else if (se_cmd->se_cmd_flags & SCF_BIDI) { + if (!read_len_valid ) + goto done; + else + se_cmd->se_cmd_flags |= SCF_TREAT_READ_AS_NORMAL; + } + if (se_cmd->se_cmd_flags & SCF_BIDI) { /* Get Data-In buffer before clean up */ - gather_data_area(udev, cmd, true); + gather_data_area(udev, cmd, true, read_len); } else if (se_cmd->data_direction == DMA_FROM_DEVICE) { - gather_data_area(udev, cmd, false); + gather_data_area(udev, cmd, false, read_len); } else if (se_cmd->data_direction == DMA_TO_DEVICE) { /* TODO: */ } else if (se_cmd->data_direction != DMA_NONE) { @@ -1070,7 +1092,13 @@ static void tcmu_handle_completion(struct tcmu_cmd *cmd, struct tcmu_cmd_entry * se_cmd->data_direction); } - target_complete_cmd(cmd->se_cmd, entry->rsp.scsi_status); +done: + if (read_len_valid) { + pr_debug("read_len = %d\n", read_len); + target_complete_cmd_with_length(cmd->se_cmd, + entry->rsp.scsi_status, read_len); + } else + target_complete_cmd(cmd->se_cmd, entry->rsp.scsi_status); out: cmd->se_cmd = NULL; @@ -1740,7 +1768,7 @@ static int tcmu_configure_device(struct se_device *dev) /* Initialise the mailbox of the ring buffer */ mb = udev->mb_addr; mb->version = TCMU_MAILBOX_VERSION; - mb->flags = TCMU_MAILBOX_FLAG_CAP_OOOC; + mb->flags = TCMU_MAILBOX_FLAG_CAP_OOOC | TCMU_MAILBOX_FLAG_CAP_READ_LEN; mb->cmdr_off = CMDR_OFF; mb->cmdr_size = udev->cmdr_size; diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index cbe98bc2b998..431742201709 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -124,6 +124,8 @@ struct n_tty_data { struct mutex output_lock; }; +#define MASK(x) ((x) & (N_TTY_BUF_SIZE - 1)) + static inline size_t read_cnt(struct n_tty_data *ldata) { return ldata->read_head - ldata->read_tail; @@ -141,6 +143,7 @@ static inline unsigned char *read_buf_addr(struct n_tty_data *ldata, size_t i) static inline unsigned char echo_buf(struct n_tty_data *ldata, size_t i) { + smp_rmb(); /* Matches smp_wmb() in add_echo_byte(). */ return ldata->echo_buf[i & (N_TTY_BUF_SIZE - 1)]; } @@ -316,9 +319,7 @@ static inline void put_tty_queue(unsigned char c, struct n_tty_data *ldata) static void reset_buffer_flags(struct n_tty_data *ldata) { ldata->read_head = ldata->canon_head = ldata->read_tail = 0; - ldata->echo_head = ldata->echo_tail = ldata->echo_commit = 0; ldata->commit_head = 0; - ldata->echo_mark = 0; ldata->line_start = 0; ldata->erasing = 0; @@ -617,13 +618,20 @@ static size_t __process_echoes(struct tty_struct *tty) old_space = space = tty_write_room(tty); tail = ldata->echo_tail; - while (ldata->echo_commit != tail) { + while (MASK(ldata->echo_commit) != MASK(tail)) { c = echo_buf(ldata, tail); if (c == ECHO_OP_START) { unsigned char op; int no_space_left = 0; /* + * Since add_echo_byte() is called without holding + * output_lock, we might see only portion of multi-byte + * operation. + */ + if (MASK(ldata->echo_commit) == MASK(tail + 1)) + goto not_yet_stored; + /* * If the buffer byte is the start of a multi-byte * operation, get the next byte, which is either the * op code or a control character value. @@ -634,6 +642,8 @@ static size_t __process_echoes(struct tty_struct *tty) unsigned int num_chars, num_bs; case ECHO_OP_ERASE_TAB: + if (MASK(ldata->echo_commit) == MASK(tail + 2)) + goto not_yet_stored; num_chars = echo_buf(ldata, tail + 2); /* @@ -728,7 +738,8 @@ static size_t __process_echoes(struct tty_struct *tty) /* If the echo buffer is nearly full (so that the possibility exists * of echo overrun before the next commit), then discard enough * data at the tail to prevent a subsequent overrun */ - while (ldata->echo_commit - tail >= ECHO_DISCARD_WATERMARK) { + while (ldata->echo_commit > tail && + ldata->echo_commit - tail >= ECHO_DISCARD_WATERMARK) { if (echo_buf(ldata, tail) == ECHO_OP_START) { if (echo_buf(ldata, tail + 1) == ECHO_OP_ERASE_TAB) tail += 3; @@ -738,6 +749,7 @@ static size_t __process_echoes(struct tty_struct *tty) tail++; } + not_yet_stored: ldata->echo_tail = tail; return old_space - space; } @@ -748,6 +760,7 @@ static void commit_echoes(struct tty_struct *tty) size_t nr, old, echoed; size_t head; + mutex_lock(&ldata->output_lock); head = ldata->echo_head; ldata->echo_mark = head; old = ldata->echo_commit - ldata->echo_tail; @@ -756,10 +769,12 @@ static void commit_echoes(struct tty_struct *tty) * is over the threshold (and try again each time another * block is accumulated) */ nr = head - ldata->echo_tail; - if (nr < ECHO_COMMIT_WATERMARK || (nr % ECHO_BLOCK > old % ECHO_BLOCK)) + if (nr < ECHO_COMMIT_WATERMARK || + (nr % ECHO_BLOCK > old % ECHO_BLOCK)) { + mutex_unlock(&ldata->output_lock); return; + } - mutex_lock(&ldata->output_lock); ldata->echo_commit = head; echoed = __process_echoes(tty); mutex_unlock(&ldata->output_lock); @@ -810,7 +825,9 @@ static void flush_echoes(struct tty_struct *tty) static inline void add_echo_byte(unsigned char c, struct n_tty_data *ldata) { - *echo_buf_addr(ldata, ldata->echo_head++) = c; + *echo_buf_addr(ldata, ldata->echo_head) = c; + smp_wmb(); /* Matches smp_rmb() in echo_buf(). */ + ldata->echo_head++; } /** @@ -978,14 +995,15 @@ static void eraser(unsigned char c, struct tty_struct *tty) } seen_alnums = 0; - while (ldata->read_head != ldata->canon_head) { + while (MASK(ldata->read_head) != MASK(ldata->canon_head)) { head = ldata->read_head; /* erase a single possibly multibyte character */ do { head--; c = read_buf(ldata, head); - } while (is_continuation(c, tty) && head != ldata->canon_head); + } while (is_continuation(c, tty) && + MASK(head) != MASK(ldata->canon_head)); /* do not partially erase */ if (is_continuation(c, tty)) @@ -1027,7 +1045,7 @@ static void eraser(unsigned char c, struct tty_struct *tty) * This info is used to go back the correct * number of columns. */ - while (tail != ldata->canon_head) { + while (MASK(tail) != MASK(ldata->canon_head)) { tail--; c = read_buf(ldata, tail); if (c == '\t') { @@ -1302,7 +1320,7 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c) finish_erasing(ldata); echo_char(c, tty); echo_char_raw('\n', ldata); - while (tail != ldata->read_head) { + while (MASK(tail) != MASK(ldata->read_head)) { echo_char(read_buf(ldata, tail), tty); tail++; } @@ -1878,30 +1896,21 @@ static int n_tty_open(struct tty_struct *tty) struct n_tty_data *ldata; /* Currently a malloc failure here can panic */ - ldata = vmalloc(sizeof(*ldata)); + ldata = vzalloc(sizeof(*ldata)); if (!ldata) - goto err; + return -ENOMEM; ldata->overrun_time = jiffies; mutex_init(&ldata->atomic_read_lock); mutex_init(&ldata->output_lock); tty->disc_data = ldata; - reset_buffer_flags(tty->disc_data); - ldata->column = 0; - ldata->canon_column = 0; - ldata->num_overrun = 0; - ldata->no_room = 0; - ldata->lnext = 0; tty->closing = 0; /* indicate buffer work may resume */ clear_bit(TTY_LDISC_HALTED, &tty->flags); n_tty_set_termios(tty, NULL); tty_unthrottle(tty); - return 0; -err: - return -ENOMEM; } static inline int input_available_p(struct tty_struct *tty, int poll) @@ -2411,7 +2420,7 @@ static unsigned long inq_canon(struct n_tty_data *ldata) tail = ldata->read_tail; nr = head - tail; /* Skip EOF-chars.. */ - while (head != tail) { + while (MASK(head) != MASK(tail)) { if (test_bit(tail & (N_TTY_BUF_SIZE - 1), ldata->read_flags) && read_buf(ldata, tail) == __DISABLED_CHAR) nr--; diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c index df93b727e984..9e59f4788589 100644 --- a/drivers/tty/serdev/core.c +++ b/drivers/tty/serdev/core.c @@ -617,6 +617,7 @@ EXPORT_SYMBOL_GPL(__serdev_device_driver_register); static void __exit serdev_exit(void) { bus_unregister(&serdev_bus_type); + ida_destroy(&ctrl_ida); } module_exit(serdev_exit); diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 3296a05cda2d..f80a300b5d68 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -3339,9 +3339,7 @@ static const struct pci_device_id blacklist[] = { /* multi-io cards handled by parport_serial */ { PCI_DEVICE(0x4348, 0x7053), }, /* WCH CH353 2S1P */ { PCI_DEVICE(0x4348, 0x5053), }, /* WCH CH353 1S1P */ - { PCI_DEVICE(0x4348, 0x7173), }, /* WCH CH355 4S */ { PCI_DEVICE(0x1c00, 0x3250), }, /* WCH CH382 2S1P */ - { PCI_DEVICE(0x1c00, 0x3470), }, /* WCH CH384 4S */ /* Moxa Smartio MUE boards handled by 8250_moxa */ { PCI_VDEVICE(MOXA, 0x1024), }, diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 1eb1a376a041..15eb6c829d39 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -784,7 +784,7 @@ int vc_allocate(unsigned int currcons) /* return 0 on success */ if (!*vc->vc_uni_pagedir_loc) con_set_default_unimap(vc); - vc->vc_screenbuf = kmalloc(vc->vc_screenbuf_size, GFP_KERNEL); + vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_KERNEL); if (!vc->vc_screenbuf) goto err_free; @@ -871,7 +871,7 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc, if (new_screen_size > (4 << 20)) return -EINVAL; - newscreen = kmalloc(new_screen_size, GFP_USER); + newscreen = kzalloc(new_screen_size, GFP_USER); if (!newscreen) return -ENOMEM; diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index af45aa3222b5..4638d9b066be 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -124,8 +124,11 @@ static int host_start(struct ci_hdrc *ci) hcd->power_budget = ci->platdata->power_budget; hcd->tpl_support = ci->platdata->tpl_support; - if (ci->phy || ci->usb_phy) + if (ci->phy || ci->usb_phy) { hcd->skip_phy_initialization = 1; + if (ci->usb_phy) + hcd->usb_phy = ci->usb_phy; + } ehci = hcd_to_ehci(hcd); ehci->caps = ci->hw_bank.cap; diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 7b366a6c0b49..998b32d0167e 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1758,6 +1758,9 @@ static const struct usb_device_id acm_ids[] = { { USB_DEVICE(0x11ca, 0x0201), /* VeriFone Mx870 Gadget Serial */ .driver_info = SINGLE_RX_URB, }, + { USB_DEVICE(0x1965, 0x0018), /* Uniden UBC125XLT */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, { USB_DEVICE(0x22b8, 0x7000), /* Motorola Q Phone */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index 4a56ac772a3c..71b3b08ad516 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -1004,6 +1004,7 @@ struct dwc2_hregs_backup { * @frame_list_sz: Frame list size * @desc_gen_cache: Kmem cache for generic descriptors * @desc_hsisoc_cache: Kmem cache for hs isochronous descriptors + * @unaligned_cache: Kmem cache for DMA mode to handle non-aligned buf * * These are for peripheral mode: * @@ -1177,6 +1178,8 @@ struct dwc2_hsotg { u32 frame_list_sz; struct kmem_cache *desc_gen_cache; struct kmem_cache *desc_hsisoc_cache; + struct kmem_cache *unaligned_cache; +#define DWC2_KMEM_UNALIGNED_BUF_SIZE 1024 #endif /* CONFIG_USB_DWC2_HOST || CONFIG_USB_DWC2_DUAL_ROLE */ diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index f0d9ccf1d665..a0f82cca2d9a 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -812,6 +812,7 @@ static int dwc2_gadget_fill_isoc_desc(struct dwc2_hsotg_ep *hs_ep, u32 index; u32 maxsize = 0; u32 mask = 0; + u8 pid = 0; maxsize = dwc2_gadget_get_desc_params(hs_ep, &mask); @@ -840,7 +841,11 @@ static int dwc2_gadget_fill_isoc_desc(struct dwc2_hsotg_ep *hs_ep, ((len << DEV_DMA_NBYTES_SHIFT) & mask)); if (hs_ep->dir_in) { - desc->status |= ((hs_ep->mc << DEV_DMA_ISOC_PID_SHIFT) & + if (len) + pid = DIV_ROUND_UP(len, hs_ep->ep.maxpacket); + else + pid = 1; + desc->status |= ((pid << DEV_DMA_ISOC_PID_SHIFT) & DEV_DMA_ISOC_PID_MASK) | ((len % hs_ep->ep.maxpacket) ? DEV_DMA_SHORT : 0) | @@ -884,6 +889,7 @@ static void dwc2_gadget_start_isoc_ddma(struct dwc2_hsotg_ep *hs_ep) struct dwc2_dma_desc *desc; if (list_empty(&hs_ep->queue)) { + hs_ep->target_frame = TARGET_FRAME_INITIAL; dev_dbg(hsotg->dev, "%s: No requests in queue\n", __func__); return; } @@ -2755,8 +2761,6 @@ static void dwc2_gadget_handle_out_token_ep_disabled(struct dwc2_hsotg_ep *ep) */ tmp = dwc2_hsotg_read_frameno(hsotg); - dwc2_hsotg_complete_request(hsotg, ep, get_ep_head(ep), 0); - if (using_desc_dma(hsotg)) { if (ep->target_frame == TARGET_FRAME_INITIAL) { /* Start first ISO Out */ @@ -2817,9 +2821,6 @@ static void dwc2_gadget_handle_nak(struct dwc2_hsotg_ep *hs_ep) tmp = dwc2_hsotg_read_frameno(hsotg); if (using_desc_dma(hsotg)) { - dwc2_hsotg_complete_request(hsotg, hs_ep, - get_ep_head(hs_ep), 0); - hs_ep->target_frame = tmp; dwc2_gadget_incr_frame_num(hs_ep); dwc2_gadget_start_isoc_ddma(hs_ep); @@ -4739,9 +4740,11 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg) } ret = usb_add_gadget_udc(dev, &hsotg->gadget); - if (ret) + if (ret) { + dwc2_hsotg_ep_free_request(&hsotg->eps_out[0]->ep, + hsotg->ctrl_req); return ret; - + } dwc2_hsotg_dump(hsotg); return 0; @@ -4755,6 +4758,7 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg) int dwc2_hsotg_remove(struct dwc2_hsotg *hsotg) { usb_del_gadget_udc(&hsotg->gadget); + dwc2_hsotg_ep_free_request(&hsotg->eps_out[0]->ep, hsotg->ctrl_req); return 0; } diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index edaf0b6af4f0..b1104be3429c 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -1567,11 +1567,20 @@ static void dwc2_hc_start_transfer(struct dwc2_hsotg *hsotg, } if (hsotg->params.host_dma) { - dwc2_writel((u32)chan->xfer_dma, - hsotg->regs + HCDMA(chan->hc_num)); + dma_addr_t dma_addr; + + if (chan->align_buf) { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "align_buf\n"); + dma_addr = chan->align_buf; + } else { + dma_addr = chan->xfer_dma; + } + dwc2_writel((u32)dma_addr, hsotg->regs + HCDMA(chan->hc_num)); + if (dbg_hc(chan)) dev_vdbg(hsotg->dev, "Wrote %08lx to HCDMA(%d)\n", - (unsigned long)chan->xfer_dma, chan->hc_num); + (unsigned long)dma_addr, chan->hc_num); } /* Start the split */ @@ -2625,6 +2634,35 @@ static void dwc2_hc_init_xfer(struct dwc2_hsotg *hsotg, } } +static int dwc2_alloc_split_dma_aligned_buf(struct dwc2_hsotg *hsotg, + struct dwc2_qh *qh, + struct dwc2_host_chan *chan) +{ + if (!hsotg->unaligned_cache || + chan->max_packet > DWC2_KMEM_UNALIGNED_BUF_SIZE) + return -ENOMEM; + + if (!qh->dw_align_buf) { + qh->dw_align_buf = kmem_cache_alloc(hsotg->unaligned_cache, + GFP_ATOMIC | GFP_DMA); + if (!qh->dw_align_buf) + return -ENOMEM; + } + + qh->dw_align_buf_dma = dma_map_single(hsotg->dev, qh->dw_align_buf, + DWC2_KMEM_UNALIGNED_BUF_SIZE, + DMA_FROM_DEVICE); + + if (dma_mapping_error(hsotg->dev, qh->dw_align_buf_dma)) { + dev_err(hsotg->dev, "can't map align_buf\n"); + chan->align_buf = 0; + return -EINVAL; + } + + chan->align_buf = qh->dw_align_buf_dma; + return 0; +} + #define DWC2_USB_DMA_ALIGN 4 struct dma_aligned_buffer { @@ -2802,6 +2840,32 @@ static int dwc2_assign_and_init_hc(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) /* Set the transfer attributes */ dwc2_hc_init_xfer(hsotg, chan, qtd); + /* For non-dword aligned buffers */ + if (hsotg->params.host_dma && qh->do_split && + chan->ep_is_in && (chan->xfer_dma & 0x3)) { + dev_vdbg(hsotg->dev, "Non-aligned buffer\n"); + if (dwc2_alloc_split_dma_aligned_buf(hsotg, qh, chan)) { + dev_err(hsotg->dev, + "Failed to allocate memory to handle non-aligned buffer\n"); + /* Add channel back to free list */ + chan->align_buf = 0; + chan->multi_count = 0; + list_add_tail(&chan->hc_list_entry, + &hsotg->free_hc_list); + qtd->in_process = 0; + qh->channel = NULL; + return -ENOMEM; + } + } else { + /* + * We assume that DMA is always aligned in non-split + * case or split out case. Warn if not. + */ + WARN_ON_ONCE(hsotg->params.host_dma && + (chan->xfer_dma & 0x3)); + chan->align_buf = 0; + } + if (chan->ep_type == USB_ENDPOINT_XFER_INT || chan->ep_type == USB_ENDPOINT_XFER_ISOC) /* @@ -5246,6 +5310,19 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg) } } + if (hsotg->params.host_dma) { + /* + * Create kmem caches to handle non-aligned buffer + * in Buffer DMA mode. + */ + hsotg->unaligned_cache = kmem_cache_create("dwc2-unaligned-dma", + DWC2_KMEM_UNALIGNED_BUF_SIZE, 4, + SLAB_CACHE_DMA, NULL); + if (!hsotg->unaligned_cache) + dev_err(hsotg->dev, + "unable to create dwc2 unaligned cache\n"); + } + hsotg->otg_port = 1; hsotg->frame_list = NULL; hsotg->frame_list_dma = 0; @@ -5280,8 +5357,9 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg) return 0; error4: - kmem_cache_destroy(hsotg->desc_gen_cache); + kmem_cache_destroy(hsotg->unaligned_cache); kmem_cache_destroy(hsotg->desc_hsisoc_cache); + kmem_cache_destroy(hsotg->desc_gen_cache); error3: dwc2_hcd_release(hsotg); error2: @@ -5322,8 +5400,9 @@ void dwc2_hcd_remove(struct dwc2_hsotg *hsotg) usb_remove_hcd(hcd); hsotg->priv = NULL; - kmem_cache_destroy(hsotg->desc_gen_cache); + kmem_cache_destroy(hsotg->unaligned_cache); kmem_cache_destroy(hsotg->desc_hsisoc_cache); + kmem_cache_destroy(hsotg->desc_gen_cache); dwc2_hcd_release(hsotg); usb_put_hcd(hcd); @@ -5435,7 +5514,7 @@ int dwc2_host_enter_hibernation(struct dwc2_hsotg *hsotg) dwc2_writel(hprt0, hsotg->regs + HPRT0); /* Wait for the HPRT0.PrtSusp register field to be set */ - if (dwc2_hsotg_wait_bit_set(hsotg, HPRT0, HPRT0_SUSP, 300)) + if (dwc2_hsotg_wait_bit_set(hsotg, HPRT0, HPRT0_SUSP, 3000)) dev_warn(hsotg->dev, "Suspend wasn't generated\n"); /* @@ -5616,6 +5695,8 @@ int dwc2_host_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup, return ret; } + dwc2_hcd_rem_wakeup(hsotg); + hsotg->hibernated = 0; hsotg->bus_suspended = 0; hsotg->lx_state = DWC2_L0; diff --git a/drivers/usb/dwc2/hcd.h b/drivers/usb/dwc2/hcd.h index 7db1ee7e7a77..5502a501f516 100644 --- a/drivers/usb/dwc2/hcd.h +++ b/drivers/usb/dwc2/hcd.h @@ -76,6 +76,8 @@ struct dwc2_qh; * (micro)frame * @xfer_buf: Pointer to current transfer buffer position * @xfer_dma: DMA address of xfer_buf + * @align_buf: In Buffer DMA mode this will be used if xfer_buf is not + * DWORD aligned * @xfer_len: Total number of bytes to transfer * @xfer_count: Number of bytes transferred so far * @start_pkt_count: Packet count at start of transfer @@ -133,6 +135,7 @@ struct dwc2_host_chan { u8 *xfer_buf; dma_addr_t xfer_dma; + dma_addr_t align_buf; u32 xfer_len; u32 xfer_count; u16 start_pkt_count; @@ -302,6 +305,9 @@ struct dwc2_hs_transfer_time { * speed. Note that this is in "schedule slice" which * is tightly packed. * @ntd: Actual number of transfer descriptors in a list + * @dw_align_buf: Used instead of original buffer if its physical address + * is not dword-aligned + * @dw_align_buf_dma: DMA address for dw_align_buf * @qtd_list: List of QTDs for this QH * @channel: Host channel currently processing transfers for this QH * @qh_list_entry: Entry for QH in either the periodic or non-periodic @@ -350,6 +356,8 @@ struct dwc2_qh { struct dwc2_hs_transfer_time hs_transfers[DWC2_HS_SCHEDULE_UFRAMES]; u32 ls_start_schedule_slice; u16 ntd; + u8 *dw_align_buf; + dma_addr_t dw_align_buf_dma; struct list_head qtd_list; struct dwc2_host_chan *channel; struct list_head qh_list_entry; diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c index fbea5e3fb947..ed7f05cf4906 100644 --- a/drivers/usb/dwc2/hcd_intr.c +++ b/drivers/usb/dwc2/hcd_intr.c @@ -942,14 +942,21 @@ static int dwc2_xfercomp_isoc_split_in(struct dwc2_hsotg *hsotg, frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; len = dwc2_get_actual_xfer_length(hsotg, chan, chnum, qtd, DWC2_HC_XFER_COMPLETE, NULL); - if (!len) { + if (!len && !qtd->isoc_split_offset) { qtd->complete_split = 0; - qtd->isoc_split_offset = 0; return 0; } frame_desc->actual_length += len; + if (chan->align_buf) { + dev_vdbg(hsotg->dev, "non-aligned buffer\n"); + dma_unmap_single(hsotg->dev, chan->qh->dw_align_buf_dma, + DWC2_KMEM_UNALIGNED_BUF_SIZE, DMA_FROM_DEVICE); + memcpy(qtd->urb->buf + (chan->xfer_dma - qtd->urb->dma), + chan->qh->dw_align_buf, len); + } + qtd->isoc_split_offset += len; hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum)); diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c index d7c3d6c776d8..301ced1618f8 100644 --- a/drivers/usb/dwc2/hcd_queue.c +++ b/drivers/usb/dwc2/hcd_queue.c @@ -383,7 +383,7 @@ static unsigned long *dwc2_get_ls_map(struct dwc2_hsotg *hsotg, /* Get the map and adjust if this is a multi_tt hub */ map = qh->dwc_tt->periodic_bitmaps; if (qh->dwc_tt->usb_tt->multi) - map += DWC2_ELEMENTS_PER_LS_BITMAP * qh->ttport; + map += DWC2_ELEMENTS_PER_LS_BITMAP * (qh->ttport - 1); return map; } @@ -1696,6 +1696,9 @@ void dwc2_hcd_qh_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) if (qh->desc_list) dwc2_hcd_qh_free_ddma(hsotg, qh); + else if (hsotg->unaligned_cache && qh->dw_align_buf) + kmem_cache_free(hsotg->unaligned_cache, qh->dw_align_buf); + kfree(qh); } diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index ea91310113b9..103807587dc6 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1272,7 +1272,6 @@ static int dwc3_probe(struct platform_device *pdev) if (!dwc->clks) return -ENOMEM; - dwc->num_clks = ARRAY_SIZE(dwc3_core_clks); dwc->dev = dev; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -1307,15 +1306,19 @@ static int dwc3_probe(struct platform_device *pdev) if (IS_ERR(dwc->reset)) return PTR_ERR(dwc->reset); - ret = clk_bulk_get(dev, dwc->num_clks, dwc->clks); - if (ret == -EPROBE_DEFER) - return ret; - /* - * Clocks are optional, but new DT platforms should support all clocks - * as required by the DT-binding. - */ - if (ret) - dwc->num_clks = 0; + if (dev->of_node) { + dwc->num_clks = ARRAY_SIZE(dwc3_core_clks); + + ret = clk_bulk_get(dev, dwc->num_clks, dwc->clks); + if (ret == -EPROBE_DEFER) + return ret; + /* + * Clocks are optional, but new DT platforms should support all + * clocks as required by the DT-binding. + */ + if (ret) + dwc->num_clks = 0; + } ret = reset_control_deassert(dwc->reset); if (ret) diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c index 6b3ccd542bd7..dbeff5e6ad14 100644 --- a/drivers/usb/dwc3/dwc3-of-simple.c +++ b/drivers/usb/dwc3/dwc3-of-simple.c @@ -165,8 +165,9 @@ static int dwc3_of_simple_remove(struct platform_device *pdev) reset_control_put(simple->resets); - pm_runtime_put_sync(dev); pm_runtime_disable(dev); + pm_runtime_put_noidle(dev); + pm_runtime_set_suspended(dev); return 0; } diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index c961a94d136b..f57e7c94b8e5 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -34,6 +34,7 @@ #define PCI_DEVICE_ID_INTEL_GLK 0x31aa #define PCI_DEVICE_ID_INTEL_CNPLP 0x9dee #define PCI_DEVICE_ID_INTEL_CNPH 0xa36e +#define PCI_DEVICE_ID_INTEL_ICLLP 0x34ee #define PCI_INTEL_BXT_DSM_GUID "732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511" #define PCI_INTEL_BXT_FUNC_PMU_PWR 4 @@ -289,6 +290,7 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_GLK), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CNPLP), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CNPH), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICLLP), }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), }, { } /* Terminating Entry */ }; diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index b0e67ab2f98c..a6d0203e40b6 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -490,6 +490,7 @@ static int dwc3_qcom_probe(struct platform_device *pdev) qcom->dwc3 = of_find_device_by_node(dwc3_np); if (!qcom->dwc3) { dev_err(&pdev->dev, "failed to get dwc3 platform device\n"); + ret = -ENODEV; goto depopulate; } @@ -547,8 +548,7 @@ static int dwc3_qcom_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM_SLEEP -static int dwc3_qcom_pm_suspend(struct device *dev) +static int __maybe_unused dwc3_qcom_pm_suspend(struct device *dev) { struct dwc3_qcom *qcom = dev_get_drvdata(dev); int ret = 0; @@ -560,7 +560,7 @@ static int dwc3_qcom_pm_suspend(struct device *dev) return ret; } -static int dwc3_qcom_pm_resume(struct device *dev) +static int __maybe_unused dwc3_qcom_pm_resume(struct device *dev) { struct dwc3_qcom *qcom = dev_get_drvdata(dev); int ret; @@ -571,23 +571,20 @@ static int dwc3_qcom_pm_resume(struct device *dev) return ret; } -#endif -#ifdef CONFIG_PM -static int dwc3_qcom_runtime_suspend(struct device *dev) +static int __maybe_unused dwc3_qcom_runtime_suspend(struct device *dev) { struct dwc3_qcom *qcom = dev_get_drvdata(dev); return dwc3_qcom_suspend(qcom); } -static int dwc3_qcom_runtime_resume(struct device *dev) +static int __maybe_unused dwc3_qcom_runtime_resume(struct device *dev) { struct dwc3_qcom *qcom = dev_get_drvdata(dev); return dwc3_qcom_resume(qcom); } -#endif static const struct dev_pm_ops dwc3_qcom_dev_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(dwc3_qcom_pm_suspend, dwc3_qcom_pm_resume) diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index f242c2bcea81..d2fa071c21b1 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -1719,6 +1719,8 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) */ if (w_value && !f->get_alt) break; + + spin_lock(&cdev->lock); value = f->set_alt(f, w_index, w_value); if (value == USB_GADGET_DELAYED_STATUS) { DBG(cdev, @@ -1728,6 +1730,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) DBG(cdev, "delayed_status count %d\n", cdev->delayed_status); } + spin_unlock(&cdev->lock); break; case USB_REQ_GET_INTERFACE: if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)) diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index dce9d12c7981..33e2030503fa 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -215,6 +215,7 @@ struct ffs_io_data { struct mm_struct *mm; struct work_struct work; + struct work_struct cancellation_work; struct usb_ep *ep; struct usb_request *req; @@ -1072,22 +1073,31 @@ ffs_epfile_open(struct inode *inode, struct file *file) return 0; } +static void ffs_aio_cancel_worker(struct work_struct *work) +{ + struct ffs_io_data *io_data = container_of(work, struct ffs_io_data, + cancellation_work); + + ENTER(); + + usb_ep_dequeue(io_data->ep, io_data->req); +} + static int ffs_aio_cancel(struct kiocb *kiocb) { struct ffs_io_data *io_data = kiocb->private; - struct ffs_epfile *epfile = kiocb->ki_filp->private_data; + struct ffs_data *ffs = io_data->ffs; int value; ENTER(); - spin_lock_irq(&epfile->ffs->eps_lock); - - if (likely(io_data && io_data->ep && io_data->req)) - value = usb_ep_dequeue(io_data->ep, io_data->req); - else + if (likely(io_data && io_data->ep && io_data->req)) { + INIT_WORK(&io_data->cancellation_work, ffs_aio_cancel_worker); + queue_work(ffs->io_completion_wq, &io_data->cancellation_work); + value = -EINPROGRESS; + } else { value = -EINVAL; - - spin_unlock_irq(&epfile->ffs->eps_lock); + } return value; } diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index acbd3d7b8828..8a62eee9eee1 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -886,12 +886,12 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id) dev = xhci->devs[slot_id]; - trace_xhci_free_virt_device(dev); - xhci->dcbaa->dev_context_ptrs[slot_id] = 0; if (!dev) return; + trace_xhci_free_virt_device(dev); + if (dev->tt_info) old_active_eps = dev->tt_info->active_eps; diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c index a8c1d073cba0..4b463e5202a4 100644 --- a/drivers/usb/host/xhci-tegra.c +++ b/drivers/usb/host/xhci-tegra.c @@ -481,7 +481,7 @@ static void tegra_xusb_mbox_handle(struct tegra_xusb *tegra, unsigned long mask; unsigned int port; bool idle, enable; - int err; + int err = 0; memset(&rsp, 0, sizeof(rsp)); @@ -1223,10 +1223,10 @@ disable_rpm: pm_runtime_disable(&pdev->dev); usb_put_hcd(tegra->hcd); disable_xusbc: - if (!&pdev->dev.pm_domain) + if (!pdev->dev.pm_domain) tegra_powergate_power_off(TEGRA_POWERGATE_XUSBC); disable_xusba: - if (!&pdev->dev.pm_domain) + if (!pdev->dev.pm_domain) tegra_powergate_power_off(TEGRA_POWERGATE_XUSBA); put_padctl: tegra_xusb_padctl_put(tegra->padctl); diff --git a/drivers/usb/host/xhci-trace.h b/drivers/usb/host/xhci-trace.h index 410544ffe78f..88b427434bd8 100644 --- a/drivers/usb/host/xhci-trace.h +++ b/drivers/usb/host/xhci-trace.h @@ -171,6 +171,37 @@ DEFINE_EVENT(xhci_log_trb, xhci_dbc_gadget_ep_queue, TP_ARGS(ring, trb) ); +DECLARE_EVENT_CLASS(xhci_log_free_virt_dev, + TP_PROTO(struct xhci_virt_device *vdev), + TP_ARGS(vdev), + TP_STRUCT__entry( + __field(void *, vdev) + __field(unsigned long long, out_ctx) + __field(unsigned long long, in_ctx) + __field(u8, fake_port) + __field(u8, real_port) + __field(u16, current_mel) + + ), + TP_fast_assign( + __entry->vdev = vdev; + __entry->in_ctx = (unsigned long long) vdev->in_ctx->dma; + __entry->out_ctx = (unsigned long long) vdev->out_ctx->dma; + __entry->fake_port = (u8) vdev->fake_port; + __entry->real_port = (u8) vdev->real_port; + __entry->current_mel = (u16) vdev->current_mel; + ), + TP_printk("vdev %p ctx %llx | %llx fake_port %d real_port %d current_mel %d", + __entry->vdev, __entry->in_ctx, __entry->out_ctx, + __entry->fake_port, __entry->real_port, __entry->current_mel + ) +); + +DEFINE_EVENT(xhci_log_free_virt_dev, xhci_free_virt_device, + TP_PROTO(struct xhci_virt_device *vdev), + TP_ARGS(vdev) +); + DECLARE_EVENT_CLASS(xhci_log_virt_dev, TP_PROTO(struct xhci_virt_device *vdev), TP_ARGS(vdev), @@ -208,11 +239,6 @@ DEFINE_EVENT(xhci_log_virt_dev, xhci_alloc_virt_device, TP_ARGS(vdev) ); -DEFINE_EVENT(xhci_log_virt_dev, xhci_free_virt_device, - TP_PROTO(struct xhci_virt_device *vdev), - TP_ARGS(vdev) -); - DEFINE_EVENT(xhci_log_virt_dev, xhci_setup_device, TP_PROTO(struct xhci_virt_device *vdev), TP_ARGS(vdev) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 8c8da2d657fa..2f4850f25e82 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -908,6 +908,41 @@ static void xhci_disable_port_wake_on_bits(struct xhci_hcd *xhci) spin_unlock_irqrestore(&xhci->lock, flags); } +static bool xhci_pending_portevent(struct xhci_hcd *xhci) +{ + struct xhci_port **ports; + int port_index; + u32 status; + u32 portsc; + + status = readl(&xhci->op_regs->status); + if (status & STS_EINT) + return true; + /* + * Checking STS_EINT is not enough as there is a lag between a change + * bit being set and the Port Status Change Event that it generated + * being written to the Event Ring. See note in xhci 1.1 section 4.19.2. + */ + + port_index = xhci->usb2_rhub.num_ports; + ports = xhci->usb2_rhub.ports; + while (port_index--) { + portsc = readl(ports[port_index]->addr); + if (portsc & PORT_CHANGE_MASK || + (portsc & PORT_PLS_MASK) == XDEV_RESUME) + return true; + } + port_index = xhci->usb3_rhub.num_ports; + ports = xhci->usb3_rhub.ports; + while (port_index--) { + portsc = readl(ports[port_index]->addr); + if (portsc & PORT_CHANGE_MASK || + (portsc & PORT_PLS_MASK) == XDEV_RESUME) + return true; + } + return false; +} + /* * Stop HC (not bus-specific) * @@ -1009,7 +1044,7 @@ EXPORT_SYMBOL_GPL(xhci_suspend); */ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) { - u32 command, temp = 0, status; + u32 command, temp = 0; struct usb_hcd *hcd = xhci_to_hcd(xhci); struct usb_hcd *secondary_hcd; int retval = 0; @@ -1043,8 +1078,13 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) command = readl(&xhci->op_regs->command); command |= CMD_CRS; writel(command, &xhci->op_regs->command); + /* + * Some controllers take up to 55+ ms to complete the controller + * restore so setting the timeout to 100ms. Xhci specification + * doesn't mention any timeout value. + */ if (xhci_handshake(&xhci->op_regs->status, - STS_RESTORE, 0, 10 * 1000)) { + STS_RESTORE, 0, 100 * 1000)) { xhci_warn(xhci, "WARN: xHC restore state timeout\n"); spin_unlock_irq(&xhci->lock); return -ETIMEDOUT; @@ -1134,8 +1174,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) done: if (retval == 0) { /* Resume root hubs only when have pending events. */ - status = readl(&xhci->op_regs->status); - if (status & STS_EINT) { + if (xhci_pending_portevent(xhci)) { usb_hcd_resume_root_hub(xhci->shared_hcd); usb_hcd_resume_root_hub(hcd); } diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 939e2f86b595..841e89ffe2e9 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -382,6 +382,10 @@ struct xhci_op_regs { #define PORT_PLC (1 << 22) /* port configure error change - port failed to configure its link partner */ #define PORT_CEC (1 << 23) +#define PORT_CHANGE_MASK (PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \ + PORT_RC | PORT_PLC | PORT_CEC) + + /* Cold Attach Status - xHC can set this bit to report device attached during * Sx state. Warm port reset should be perfomed to clear this bit and move port * to connected state. diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index eb6c26cbe579..ee0cc1d90b51 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -95,6 +95,9 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */ { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */ { USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */ + { USB_DEVICE(0x10C4, 0x817C) }, /* CESINEL MEDCAL N Power Quality Monitor */ + { USB_DEVICE(0x10C4, 0x817D) }, /* CESINEL MEDCAL NT Power Quality Monitor */ + { USB_DEVICE(0x10C4, 0x817E) }, /* CESINEL MEDCAL S Power Quality Monitor */ { USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */ { USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */ { USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */ @@ -112,6 +115,9 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */ { USB_DEVICE(0x10C4, 0x8281) }, /* Nanotec Plug & Drive */ { USB_DEVICE(0x10C4, 0x8293) }, /* Telegesis ETRX2USB */ + { USB_DEVICE(0x10C4, 0x82EF) }, /* CESINEL FALCO 6105 AC Power Supply */ + { USB_DEVICE(0x10C4, 0x82F1) }, /* CESINEL MEDCAL EFD Earth Fault Detector */ + { USB_DEVICE(0x10C4, 0x82F2) }, /* CESINEL MEDCAL ST Network Analyzer */ { USB_DEVICE(0x10C4, 0x82F4) }, /* Starizona MicroTouch */ { USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */ { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ @@ -124,7 +130,9 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8470) }, /* Juniper Networks BX Series System Console */ { USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */ { USB_DEVICE(0x10C4, 0x84B6) }, /* Starizona Hyperion */ + { USB_DEVICE(0x10C4, 0x851E) }, /* CESINEL MEDCAL PT Network Analyzer */ { USB_DEVICE(0x10C4, 0x85A7) }, /* LifeScan OneTouch Verio IQ */ + { USB_DEVICE(0x10C4, 0x85B8) }, /* CESINEL ReCon T Energy Logger */ { USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */ { USB_DEVICE(0x10C4, 0x85EB) }, /* AC-Services CIS-IBUS */ { USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */ @@ -134,17 +142,23 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8857) }, /* CEL EM357 ZigBee USB Stick */ { USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */ { USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */ + { USB_DEVICE(0x10C4, 0x88FB) }, /* CESINEL MEDCAL STII Network Analyzer */ + { USB_DEVICE(0x10C4, 0x8938) }, /* CESINEL MEDCAL S II Network Analyzer */ { USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */ { USB_DEVICE(0x10C4, 0x8962) }, /* Brim Brothers charging dock */ { USB_DEVICE(0x10C4, 0x8977) }, /* CEL MeshWorks DevKit Device */ { USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */ + { USB_DEVICE(0x10C4, 0x89A4) }, /* CESINEL FTBC Flexible Thyristor Bridge Controller */ { USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */ { USB_DEVICE(0x10C4, 0x8A5E) }, /* CEL EM3588 ZigBee USB Stick Long Range */ { USB_DEVICE(0x10C4, 0x8B34) }, /* Qivicon ZigBee USB Radio Stick */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ + { USB_DEVICE(0x10C4, 0xEA63) }, /* Silicon Labs Windows Update (CP2101-4/CP2102N) */ { USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA71) }, /* Infinity GPS-MIC-1 Radio Monophone */ + { USB_DEVICE(0x10C4, 0xEA7A) }, /* Silicon Labs Windows Update (CP2105) */ + { USB_DEVICE(0x10C4, 0xEA7B) }, /* Silicon Labs Windows Update (CP2108) */ { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */ { USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */ { USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100 */ diff --git a/drivers/usb/typec/tcpm.c b/drivers/usb/typec/tcpm.c index 8a201dd53d36..d961f1ec0e08 100644 --- a/drivers/usb/typec/tcpm.c +++ b/drivers/usb/typec/tcpm.c @@ -418,17 +418,18 @@ static void _tcpm_log(struct tcpm_port *port, const char *fmt, va_list args) u64 ts_nsec = local_clock(); unsigned long rem_nsec; + mutex_lock(&port->logbuffer_lock); if (!port->logbuffer[port->logbuffer_head]) { port->logbuffer[port->logbuffer_head] = kzalloc(LOG_BUFFER_ENTRY_SIZE, GFP_KERNEL); - if (!port->logbuffer[port->logbuffer_head]) + if (!port->logbuffer[port->logbuffer_head]) { + mutex_unlock(&port->logbuffer_lock); return; + } } vsnprintf(tmpbuffer, sizeof(tmpbuffer), fmt, args); - mutex_lock(&port->logbuffer_lock); - if (tcpm_log_full(port)) { port->logbuffer_head = max(port->logbuffer_head - 1, 0); strcpy(tmpbuffer, "overflow"); @@ -3043,7 +3044,8 @@ static void run_state_machine(struct tcpm_port *port) tcpm_port_is_sink(port) && time_is_after_jiffies(port->delayed_runtime)) { tcpm_set_state(port, SNK_DISCOVERY, - port->delayed_runtime - jiffies); + jiffies_to_msecs(port->delayed_runtime - + jiffies)); break; } tcpm_set_state(port, unattached_state(port), 0); diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c index bd5cca5632b3..8d0a6fe748bd 100644 --- a/drivers/usb/typec/ucsi/ucsi.c +++ b/drivers/usb/typec/ucsi/ucsi.c @@ -350,6 +350,19 @@ static void ucsi_connector_change(struct work_struct *work) } if (con->status.change & UCSI_CONSTAT_CONNECT_CHANGE) { + typec_set_pwr_role(con->port, con->status.pwr_dir); + + switch (con->status.partner_type) { + case UCSI_CONSTAT_PARTNER_TYPE_UFP: + typec_set_data_role(con->port, TYPEC_HOST); + break; + case UCSI_CONSTAT_PARTNER_TYPE_DFP: + typec_set_data_role(con->port, TYPEC_DEVICE); + break; + default: + break; + } + if (con->status.connected) ucsi_register_partner(con); else diff --git a/drivers/usb/typec/ucsi/ucsi_acpi.c b/drivers/usb/typec/ucsi/ucsi_acpi.c index 44eb4e1ea817..a18112a83fae 100644 --- a/drivers/usb/typec/ucsi/ucsi_acpi.c +++ b/drivers/usb/typec/ucsi/ucsi_acpi.c @@ -79,6 +79,11 @@ static int ucsi_acpi_probe(struct platform_device *pdev) return -ENODEV; } + /* This will make sure we can use ioremap_nocache() */ + status = acpi_release_memory(ACPI_HANDLE(&pdev->dev), res, 1); + if (ACPI_FAILURE(status)) + return -ENOMEM; + /* * NOTE: The memory region for the data structures is used also in an * operation region, which means ACPI has already reserved it. Therefore diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c index 686dc670fd29..29756d88799b 100644 --- a/drivers/vhost/net.c +++ b/drivers/vhost/net.c @@ -1226,7 +1226,8 @@ err_used: if (ubufs) vhost_net_ubuf_put_wait_and_free(ubufs); err_ubufs: - sockfd_put(sock); + if (sock) + sockfd_put(sock); err_vq: mutex_unlock(&vq->mutex); err: diff --git a/drivers/xen/Makefile b/drivers/xen/Makefile index 451e833f5931..48b154276179 100644 --- a/drivers/xen/Makefile +++ b/drivers/xen/Makefile @@ -41,4 +41,4 @@ obj-$(CONFIG_XEN_PVCALLS_FRONTEND) += pvcalls-front.o xen-evtchn-y := evtchn.o xen-gntdev-y := gntdev.o xen-gntalloc-y := gntalloc.o -xen-privcmd-y := privcmd.o +xen-privcmd-y := privcmd.o privcmd-buf.o diff --git a/drivers/xen/events/events_base.c b/drivers/xen/events/events_base.c index 762378f1811c..08e4af04d6f2 100644 --- a/drivers/xen/events/events_base.c +++ b/drivers/xen/events/events_base.c @@ -628,8 +628,6 @@ static void __unbind_from_irq(unsigned int irq) xen_irq_info_cleanup(info); } - BUG_ON(info_for_irq(irq)->type == IRQT_UNBOUND); - xen_free_irq(irq); } diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c index 2473b0a9e6e4..ba9f3eec2bd0 100644 --- a/drivers/xen/grant-table.c +++ b/drivers/xen/grant-table.c @@ -799,7 +799,7 @@ int gnttab_alloc_pages(int nr_pages, struct page **pages) return 0; } -EXPORT_SYMBOL(gnttab_alloc_pages); +EXPORT_SYMBOL_GPL(gnttab_alloc_pages); /** * gnttab_free_pages - free pages allocated by gnttab_alloc_pages() @@ -820,7 +820,7 @@ void gnttab_free_pages(int nr_pages, struct page **pages) } free_xenballooned_pages(nr_pages, pages); } -EXPORT_SYMBOL(gnttab_free_pages); +EXPORT_SYMBOL_GPL(gnttab_free_pages); /* Handling of paged out grant targets (GNTST_eagain) */ #define MAX_DELAY 256 diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c index 8835065029d3..c93d8ef8df34 100644 --- a/drivers/xen/manage.c +++ b/drivers/xen/manage.c @@ -289,8 +289,15 @@ static void sysrq_handler(struct xenbus_watch *watch, const char *path, return; } - if (sysrq_key != '\0') - xenbus_printf(xbt, "control", "sysrq", "%c", '\0'); + if (sysrq_key != '\0') { + err = xenbus_printf(xbt, "control", "sysrq", "%c", '\0'); + if (err) { + pr_err("%s: Error %d writing sysrq in control/sysrq\n", + __func__, err); + xenbus_transaction_end(xbt, 1); + return; + } + } err = xenbus_transaction_end(xbt, 0); if (err == -EAGAIN) @@ -342,7 +349,12 @@ static int setup_shutdown_watcher(void) continue; snprintf(node, FEATURE_PATH_SIZE, "feature-%s", shutdown_handlers[idx].command); - xenbus_printf(XBT_NIL, "control", node, "%u", 1); + err = xenbus_printf(XBT_NIL, "control", node, "%u", 1); + if (err) { + pr_err("%s: Error %d writing %s\n", __func__, + err, node); + return err; + } } return 0; diff --git a/drivers/xen/privcmd-buf.c b/drivers/xen/privcmd-buf.c new file mode 100644 index 000000000000..df1ed37c3269 --- /dev/null +++ b/drivers/xen/privcmd-buf.c @@ -0,0 +1,210 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT + +/****************************************************************************** + * privcmd-buf.c + * + * Mmap of hypercall buffers. + * + * Copyright (c) 2018 Juergen Gross + */ + +#define pr_fmt(fmt) "xen:" KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/list.h> +#include <linux/miscdevice.h> +#include <linux/mm.h> +#include <linux/slab.h> + +#include "privcmd.h" + +MODULE_LICENSE("GPL"); + +static unsigned int limit = 64; +module_param(limit, uint, 0644); +MODULE_PARM_DESC(limit, "Maximum number of pages that may be allocated by " + "the privcmd-buf device per open file"); + +struct privcmd_buf_private { + struct mutex lock; + struct list_head list; + unsigned int allocated; +}; + +struct privcmd_buf_vma_private { + struct privcmd_buf_private *file_priv; + struct list_head list; + unsigned int users; + unsigned int n_pages; + struct page *pages[]; +}; + +static int privcmd_buf_open(struct inode *ino, struct file *file) +{ + struct privcmd_buf_private *file_priv; + + file_priv = kzalloc(sizeof(*file_priv), GFP_KERNEL); + if (!file_priv) + return -ENOMEM; + + mutex_init(&file_priv->lock); + INIT_LIST_HEAD(&file_priv->list); + + file->private_data = file_priv; + + return 0; +} + +static void privcmd_buf_vmapriv_free(struct privcmd_buf_vma_private *vma_priv) +{ + unsigned int i; + + vma_priv->file_priv->allocated -= vma_priv->n_pages; + + list_del(&vma_priv->list); + + for (i = 0; i < vma_priv->n_pages; i++) + if (vma_priv->pages[i]) + __free_page(vma_priv->pages[i]); + + kfree(vma_priv); +} + +static int privcmd_buf_release(struct inode *ino, struct file *file) +{ + struct privcmd_buf_private *file_priv = file->private_data; + struct privcmd_buf_vma_private *vma_priv; + + mutex_lock(&file_priv->lock); + + while (!list_empty(&file_priv->list)) { + vma_priv = list_first_entry(&file_priv->list, + struct privcmd_buf_vma_private, + list); + privcmd_buf_vmapriv_free(vma_priv); + } + + mutex_unlock(&file_priv->lock); + + kfree(file_priv); + + return 0; +} + +static void privcmd_buf_vma_open(struct vm_area_struct *vma) +{ + struct privcmd_buf_vma_private *vma_priv = vma->vm_private_data; + + if (!vma_priv) + return; + + mutex_lock(&vma_priv->file_priv->lock); + vma_priv->users++; + mutex_unlock(&vma_priv->file_priv->lock); +} + +static void privcmd_buf_vma_close(struct vm_area_struct *vma) +{ + struct privcmd_buf_vma_private *vma_priv = vma->vm_private_data; + struct privcmd_buf_private *file_priv; + + if (!vma_priv) + return; + + file_priv = vma_priv->file_priv; + + mutex_lock(&file_priv->lock); + + vma_priv->users--; + if (!vma_priv->users) + privcmd_buf_vmapriv_free(vma_priv); + + mutex_unlock(&file_priv->lock); +} + +static vm_fault_t privcmd_buf_vma_fault(struct vm_fault *vmf) +{ + pr_debug("fault: vma=%p %lx-%lx, pgoff=%lx, uv=%p\n", + vmf->vma, vmf->vma->vm_start, vmf->vma->vm_end, + vmf->pgoff, (void *)vmf->address); + + return VM_FAULT_SIGBUS; +} + +static const struct vm_operations_struct privcmd_buf_vm_ops = { + .open = privcmd_buf_vma_open, + .close = privcmd_buf_vma_close, + .fault = privcmd_buf_vma_fault, +}; + +static int privcmd_buf_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct privcmd_buf_private *file_priv = file->private_data; + struct privcmd_buf_vma_private *vma_priv; + unsigned long count = vma_pages(vma); + unsigned int i; + int ret = 0; + + if (!(vma->vm_flags & VM_SHARED) || count > limit || + file_priv->allocated + count > limit) + return -EINVAL; + + vma_priv = kzalloc(sizeof(*vma_priv) + count * sizeof(void *), + GFP_KERNEL); + if (!vma_priv) + return -ENOMEM; + + vma_priv->n_pages = count; + count = 0; + for (i = 0; i < vma_priv->n_pages; i++) { + vma_priv->pages[i] = alloc_page(GFP_KERNEL | __GFP_ZERO); + if (!vma_priv->pages[i]) + break; + count++; + } + + mutex_lock(&file_priv->lock); + + file_priv->allocated += count; + + vma_priv->file_priv = file_priv; + vma_priv->users = 1; + + vma->vm_flags |= VM_IO | VM_DONTEXPAND; + vma->vm_ops = &privcmd_buf_vm_ops; + vma->vm_private_data = vma_priv; + + list_add(&vma_priv->list, &file_priv->list); + + if (vma_priv->n_pages != count) + ret = -ENOMEM; + else + for (i = 0; i < vma_priv->n_pages; i++) { + ret = vm_insert_page(vma, vma->vm_start + i * PAGE_SIZE, + vma_priv->pages[i]); + if (ret) + break; + } + + if (ret) + privcmd_buf_vmapriv_free(vma_priv); + + mutex_unlock(&file_priv->lock); + + return ret; +} + +const struct file_operations xen_privcmdbuf_fops = { + .owner = THIS_MODULE, + .open = privcmd_buf_open, + .release = privcmd_buf_release, + .mmap = privcmd_buf_mmap, +}; +EXPORT_SYMBOL_GPL(xen_privcmdbuf_fops); + +struct miscdevice xen_privcmdbuf_dev = { + .minor = MISC_DYNAMIC_MINOR, + .name = "xen/hypercall", + .fops = &xen_privcmdbuf_fops, +}; diff --git a/drivers/xen/privcmd.c b/drivers/xen/privcmd.c index 8ae0349d9f0a..7e6e682104dc 100644 --- a/drivers/xen/privcmd.c +++ b/drivers/xen/privcmd.c @@ -1007,12 +1007,21 @@ static int __init privcmd_init(void) pr_err("Could not register Xen privcmd device\n"); return err; } + + err = misc_register(&xen_privcmdbuf_dev); + if (err != 0) { + pr_err("Could not register Xen hypercall-buf device\n"); + misc_deregister(&privcmd_dev); + return err; + } + return 0; } static void __exit privcmd_exit(void) { misc_deregister(&privcmd_dev); + misc_deregister(&xen_privcmdbuf_dev); } module_init(privcmd_init); diff --git a/drivers/xen/privcmd.h b/drivers/xen/privcmd.h index 14facaeed36f..0dd9f8f67ee3 100644 --- a/drivers/xen/privcmd.h +++ b/drivers/xen/privcmd.h @@ -1,3 +1,6 @@ #include <linux/fs.h> extern const struct file_operations xen_privcmd_fops; +extern const struct file_operations xen_privcmdbuf_fops; + +extern struct miscdevice xen_privcmdbuf_dev; diff --git a/drivers/xen/xen-scsiback.c b/drivers/xen/xen-scsiback.c index 7bc88fd43cfc..e2f3e8b0fba9 100644 --- a/drivers/xen/xen-scsiback.c +++ b/drivers/xen/xen-scsiback.c @@ -1012,6 +1012,7 @@ static void scsiback_do_add_lun(struct vscsibk_info *info, const char *state, { struct v2p_entry *entry; unsigned long flags; + int err; if (try) { spin_lock_irqsave(&info->v2p_lock, flags); @@ -1027,8 +1028,11 @@ static void scsiback_do_add_lun(struct vscsibk_info *info, const char *state, scsiback_del_translation_entry(info, vir); } } else if (!try) { - xenbus_printf(XBT_NIL, info->dev->nodename, state, + err = xenbus_printf(XBT_NIL, info->dev->nodename, state, "%d", XenbusStateClosed); + if (err) + xenbus_dev_error(info->dev, err, + "%s: writing %s", __func__, state); } } @@ -1067,8 +1071,11 @@ static void scsiback_do_1lun_hotplug(struct vscsibk_info *info, int op, snprintf(str, sizeof(str), "vscsi-devs/%s/p-dev", ent); val = xenbus_read(XBT_NIL, dev->nodename, str, NULL); if (IS_ERR(val)) { - xenbus_printf(XBT_NIL, dev->nodename, state, + err = xenbus_printf(XBT_NIL, dev->nodename, state, "%d", XenbusStateClosed); + if (err) + xenbus_dev_error(info->dev, err, + "%s: writing %s", __func__, state); return; } strlcpy(phy, val, VSCSI_NAMELEN); @@ -1079,8 +1086,11 @@ static void scsiback_do_1lun_hotplug(struct vscsibk_info *info, int op, err = xenbus_scanf(XBT_NIL, dev->nodename, str, "%u:%u:%u:%u", &vir.hst, &vir.chn, &vir.tgt, &vir.lun); if (XENBUS_EXIST_ERR(err)) { - xenbus_printf(XBT_NIL, dev->nodename, state, + err = xenbus_printf(XBT_NIL, dev->nodename, state, "%d", XenbusStateClosed); + if (err) + xenbus_dev_error(info->dev, err, + "%s: writing %s", __func__, state); return; } @@ -5,7 +5,6 @@ * Implements an efficient asynchronous io interface. * * Copyright 2000, 2001, 2002 Red Hat, Inc. All Rights Reserved. - * Copyright 2018 Christoph Hellwig. * * See ../COPYING for licensing terms. */ @@ -165,22 +164,10 @@ struct fsync_iocb { bool datasync; }; -struct poll_iocb { - struct file *file; - __poll_t events; - struct wait_queue_head *head; - - union { - struct wait_queue_entry wait; - struct work_struct work; - }; -}; - struct aio_kiocb { union { struct kiocb rw; struct fsync_iocb fsync; - struct poll_iocb poll; }; struct kioctx *ki_ctx; @@ -1590,6 +1577,7 @@ static int aio_fsync(struct fsync_iocb *req, struct iocb *iocb, bool datasync) if (unlikely(iocb->aio_buf || iocb->aio_offset || iocb->aio_nbytes || iocb->aio_rw_flags)) return -EINVAL; + req->file = fget(iocb->aio_fildes); if (unlikely(!req->file)) return -EBADF; @@ -1604,137 +1592,6 @@ static int aio_fsync(struct fsync_iocb *req, struct iocb *iocb, bool datasync) return 0; } -/* need to use list_del_init so we can check if item was present */ -static inline bool __aio_poll_remove(struct poll_iocb *req) -{ - if (list_empty(&req->wait.entry)) - return false; - list_del_init(&req->wait.entry); - return true; -} - -static inline void __aio_poll_complete(struct aio_kiocb *iocb, __poll_t mask) -{ - fput(iocb->poll.file); - aio_complete(iocb, mangle_poll(mask), 0); -} - -static void aio_poll_work(struct work_struct *work) -{ - struct aio_kiocb *iocb = container_of(work, struct aio_kiocb, poll.work); - - if (!list_empty_careful(&iocb->ki_list)) - aio_remove_iocb(iocb); - __aio_poll_complete(iocb, iocb->poll.events); -} - -static int aio_poll_cancel(struct kiocb *iocb) -{ - struct aio_kiocb *aiocb = container_of(iocb, struct aio_kiocb, rw); - struct poll_iocb *req = &aiocb->poll; - struct wait_queue_head *head = req->head; - bool found = false; - - spin_lock(&head->lock); - found = __aio_poll_remove(req); - spin_unlock(&head->lock); - - if (found) { - req->events = 0; - INIT_WORK(&req->work, aio_poll_work); - schedule_work(&req->work); - } - return 0; -} - -static int aio_poll_wake(struct wait_queue_entry *wait, unsigned mode, int sync, - void *key) -{ - struct poll_iocb *req = container_of(wait, struct poll_iocb, wait); - struct aio_kiocb *iocb = container_of(req, struct aio_kiocb, poll); - struct file *file = req->file; - __poll_t mask = key_to_poll(key); - - assert_spin_locked(&req->head->lock); - - /* for instances that support it check for an event match first: */ - if (mask && !(mask & req->events)) - return 0; - - mask = file->f_op->poll_mask(file, req->events) & req->events; - if (!mask) - return 0; - - __aio_poll_remove(req); - - /* - * Try completing without a context switch if we can acquire ctx_lock - * without spinning. Otherwise we need to defer to a workqueue to - * avoid a deadlock due to the lock order. - */ - if (spin_trylock(&iocb->ki_ctx->ctx_lock)) { - list_del_init(&iocb->ki_list); - spin_unlock(&iocb->ki_ctx->ctx_lock); - - __aio_poll_complete(iocb, mask); - } else { - req->events = mask; - INIT_WORK(&req->work, aio_poll_work); - schedule_work(&req->work); - } - - return 1; -} - -static ssize_t aio_poll(struct aio_kiocb *aiocb, struct iocb *iocb) -{ - struct kioctx *ctx = aiocb->ki_ctx; - struct poll_iocb *req = &aiocb->poll; - __poll_t mask; - - /* reject any unknown events outside the normal event mask. */ - if ((u16)iocb->aio_buf != iocb->aio_buf) - return -EINVAL; - /* reject fields that are not defined for poll */ - if (iocb->aio_offset || iocb->aio_nbytes || iocb->aio_rw_flags) - return -EINVAL; - - req->events = demangle_poll(iocb->aio_buf) | EPOLLERR | EPOLLHUP; - req->file = fget(iocb->aio_fildes); - if (unlikely(!req->file)) - return -EBADF; - if (!file_has_poll_mask(req->file)) - goto out_fail; - - req->head = req->file->f_op->get_poll_head(req->file, req->events); - if (!req->head) - goto out_fail; - if (IS_ERR(req->head)) { - mask = EPOLLERR; - goto done; - } - - init_waitqueue_func_entry(&req->wait, aio_poll_wake); - aiocb->ki_cancel = aio_poll_cancel; - - spin_lock_irq(&ctx->ctx_lock); - spin_lock(&req->head->lock); - mask = req->file->f_op->poll_mask(req->file, req->events) & req->events; - if (!mask) { - __add_wait_queue(req->head, &req->wait); - list_add_tail(&aiocb->ki_list, &ctx->active_reqs); - } - spin_unlock(&req->head->lock); - spin_unlock_irq(&ctx->ctx_lock); -done: - if (mask) - __aio_poll_complete(aiocb, mask); - return 0; -out_fail: - fput(req->file); - return -EINVAL; /* same as no support for IOCB_CMD_POLL */ -} - static int io_submit_one(struct kioctx *ctx, struct iocb __user *user_iocb, bool compat) { @@ -1808,9 +1665,6 @@ static int io_submit_one(struct kioctx *ctx, struct iocb __user *user_iocb, case IOCB_CMD_FDSYNC: ret = aio_fsync(&req->fsync, &iocb, true); break; - case IOCB_CMD_POLL: - ret = aio_poll(req, &iocb); - break; default: pr_debug("invalid aio operation %d\n", iocb.aio_lio_opcode); ret = -EINVAL; diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index cce6087d6880..e55843f536bc 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -4542,8 +4542,11 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, offset_in_extent = em_start - em->start; em_end = extent_map_end(em); em_len = em_end - em_start; - disko = em->block_start + offset_in_extent; flags = 0; + if (em->block_start < EXTENT_MAP_LAST_BYTE) + disko = em->block_start + offset_in_extent; + else + disko = 0; /* * bump off for our next call to get_extent diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index e9482f0db9d0..eba61bcb9bb3 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -9005,13 +9005,14 @@ again: unlock_extent_cached(io_tree, page_start, page_end, &cached_state); -out_unlock: if (!ret2) { btrfs_delalloc_release_extents(BTRFS_I(inode), PAGE_SIZE, true); sb_end_pagefault(inode->i_sb); extent_changeset_free(data_reserved); return VM_FAULT_LOCKED; } + +out_unlock: unlock_page(page); out: btrfs_delalloc_release_extents(BTRFS_I(inode), PAGE_SIZE, (ret != 0)); @@ -9443,6 +9444,7 @@ static int btrfs_rename_exchange(struct inode *old_dir, u64 new_idx = 0; u64 root_objectid; int ret; + int ret2; bool root_log_pinned = false; bool dest_log_pinned = false; @@ -9639,7 +9641,8 @@ out_fail: dest_log_pinned = false; } } - ret = btrfs_end_transaction(trans); + ret2 = btrfs_end_transaction(trans); + ret = ret ? ret : ret2; out_notrans: if (new_ino == BTRFS_FIRST_FREE_OBJECTID) up_read(&fs_info->subvol_sem); diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index c2837a32d689..43ecbe620dea 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -3577,7 +3577,7 @@ static int btrfs_extent_same(struct inode *src, u64 loff, u64 olen, ret = btrfs_extent_same_range(src, loff, BTRFS_MAX_DEDUPE_LEN, dst, dst_loff, &cmp); if (ret) - goto out_unlock; + goto out_free; loff += BTRFS_MAX_DEDUPE_LEN; dst_loff += BTRFS_MAX_DEDUPE_LEN; @@ -3587,16 +3587,16 @@ static int btrfs_extent_same(struct inode *src, u64 loff, u64 olen, ret = btrfs_extent_same_range(src, loff, tail_len, dst, dst_loff, &cmp); +out_free: + kvfree(cmp.src_pages); + kvfree(cmp.dst_pages); + out_unlock: if (same_inode) inode_unlock(src); else btrfs_double_inode_unlock(src, dst); -out_free: - kvfree(cmp.src_pages); - kvfree(cmp.dst_pages); - return ret; } diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c index 1874a6d2e6f5..c25dc47210a3 100644 --- a/fs/btrfs/qgroup.c +++ b/fs/btrfs/qgroup.c @@ -2680,8 +2680,10 @@ out: free_extent_buffer(scratch_leaf); } - if (done && !ret) + if (done && !ret) { ret = 1; + fs_info->qgroup_rescan_progress.objectid = (u64)-1; + } return ret; } @@ -2784,13 +2786,20 @@ qgroup_rescan_init(struct btrfs_fs_info *fs_info, u64 progress_objectid, if (!init_flags) { /* we're resuming qgroup rescan at mount time */ - if (!(fs_info->qgroup_flags & BTRFS_QGROUP_STATUS_FLAG_RESCAN)) + if (!(fs_info->qgroup_flags & + BTRFS_QGROUP_STATUS_FLAG_RESCAN)) { btrfs_warn(fs_info, "qgroup rescan init failed, qgroup is not enabled"); - else if (!(fs_info->qgroup_flags & BTRFS_QGROUP_STATUS_FLAG_ON)) + ret = -EINVAL; + } else if (!(fs_info->qgroup_flags & + BTRFS_QGROUP_STATUS_FLAG_ON)) { btrfs_warn(fs_info, "qgroup rescan init failed, qgroup rescan is not queued"); - return -EINVAL; + ret = -EINVAL; + } + + if (ret) + return ret; } mutex_lock(&fs_info->qgroup_rescan_lock); diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c index ee764ac352ab..a866be999216 100644 --- a/fs/ceph/inode.c +++ b/fs/ceph/inode.c @@ -1135,6 +1135,7 @@ static struct dentry *splice_dentry(struct dentry *dn, struct inode *in) if (IS_ERR(realdn)) { pr_err("splice_dentry error %ld %p inode %p ino %llx.%llx\n", PTR_ERR(realdn), dn, in, ceph_vinop(in)); + dput(dn); dn = realdn; /* note realdn contains the error */ goto out; } else if (realdn) { diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c index 116146022aa1..bfe999505815 100644 --- a/fs/cifs/cifs_debug.c +++ b/fs/cifs/cifs_debug.c @@ -126,6 +126,25 @@ static void cifs_debug_tcon(struct seq_file *m, struct cifs_tcon *tcon) seq_putc(m, '\n'); } +static void +cifs_dump_iface(struct seq_file *m, struct cifs_server_iface *iface) +{ + struct sockaddr_in *ipv4 = (struct sockaddr_in *)&iface->sockaddr; + struct sockaddr_in6 *ipv6 = (struct sockaddr_in6 *)&iface->sockaddr; + + seq_printf(m, "\t\tSpeed: %zu bps\n", iface->speed); + seq_puts(m, "\t\tCapabilities: "); + if (iface->rdma_capable) + seq_puts(m, "rdma "); + if (iface->rss_capable) + seq_puts(m, "rss "); + seq_putc(m, '\n'); + if (iface->sockaddr.ss_family == AF_INET) + seq_printf(m, "\t\tIPv4: %pI4\n", &ipv4->sin_addr); + else if (iface->sockaddr.ss_family == AF_INET6) + seq_printf(m, "\t\tIPv6: %pI6\n", &ipv6->sin6_addr); +} + static int cifs_debug_data_proc_show(struct seq_file *m, void *v) { struct list_head *tmp1, *tmp2, *tmp3; @@ -312,6 +331,16 @@ skip_rdma: mid_entry->mid); } spin_unlock(&GlobalMid_Lock); + + spin_lock(&ses->iface_lock); + if (ses->iface_count) + seq_printf(m, "\n\tServer interfaces: %zu\n", + ses->iface_count); + for (j = 0; j < ses->iface_count; j++) { + seq_printf(m, "\t%d)\n", j); + cifs_dump_iface(m, &ses->iface_list[j]); + } + spin_unlock(&ses->iface_lock); } } spin_unlock(&cifs_tcp_ses_lock); diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c index 937251cc61c0..ee2a8ec70056 100644 --- a/fs/cifs/cifsencrypt.c +++ b/fs/cifs/cifsencrypt.c @@ -37,7 +37,6 @@ #include <crypto/aead.h> int __cifs_calc_signature(struct smb_rqst *rqst, - int start, struct TCP_Server_Info *server, char *signature, struct shash_desc *shash) { @@ -45,16 +44,27 @@ int __cifs_calc_signature(struct smb_rqst *rqst, int rc; struct kvec *iov = rqst->rq_iov; int n_vec = rqst->rq_nvec; + int is_smb2 = server->vals->header_preamble_size == 0; - for (i = start; i < n_vec; i++) { + /* iov[0] is actual data and not the rfc1002 length for SMB2+ */ + if (is_smb2) { + if (iov[0].iov_len <= 4) + return -EIO; + i = 0; + } else { + if (n_vec < 2 || iov[0].iov_len != 4) + return -EIO; + i = 1; /* skip rfc1002 length */ + } + + for (; i < n_vec; i++) { if (iov[i].iov_len == 0) continue; if (iov[i].iov_base == NULL) { cifs_dbg(VFS, "null iovec entry\n"); return -EIO; } - if (i == 1 && iov[1].iov_len <= 4) - break; /* nothing to sign or corrupt header */ + rc = crypto_shash_update(shash, iov[i].iov_base, iov[i].iov_len); if (rc) { @@ -118,7 +128,7 @@ static int cifs_calc_signature(struct smb_rqst *rqst, return rc; } - return __cifs_calc_signature(rqst, 1, server, signature, + return __cifs_calc_signature(rqst, server, signature, &server->secmech.sdescmd5->shash); } diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index 1efa2e65bc1a..bd78da59a4fd 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -33,6 +33,9 @@ #define CIFS_MAGIC_NUMBER 0xFF534D42 /* the first four bytes of SMB PDUs */ +#define CIFS_PORT 445 +#define RFC1001_PORT 139 + /* * The sizes of various internal tables and strings */ @@ -312,6 +315,10 @@ struct smb_version_operations { /* send echo request */ int (*echo)(struct TCP_Server_Info *); /* create directory */ + int (*posix_mkdir)(const unsigned int xid, struct inode *inode, + umode_t mode, struct cifs_tcon *tcon, + const char *full_path, + struct cifs_sb_info *cifs_sb); int (*mkdir)(const unsigned int, struct cifs_tcon *, const char *, struct cifs_sb_info *); /* set info on created directory */ @@ -838,6 +845,13 @@ static inline void cifs_set_net_ns(struct TCP_Server_Info *srv, struct net *net) #endif +struct cifs_server_iface { + size_t speed; + unsigned int rdma_capable : 1; + unsigned int rss_capable : 1; + struct sockaddr_storage sockaddr; +}; + /* * Session structure. One of these for each uid session with a particular host */ @@ -875,6 +889,20 @@ struct cifs_ses { #ifdef CONFIG_CIFS_SMB311 __u8 preauth_sha_hash[SMB2_PREAUTH_HASH_SIZE]; #endif /* 3.1.1 */ + + /* + * Network interfaces available on the server this session is + * connected to. + * + * Other channels can be opened by connecting and binding this + * session to interfaces from this list. + * + * iface_lock should be taken when accessing any of these fields + */ + spinlock_t iface_lock; + struct cifs_server_iface *iface_list; + size_t iface_count; + unsigned long iface_last_update; /* jiffies */ }; static inline bool @@ -883,6 +911,14 @@ cap_unix(struct cifs_ses *ses) return ses->server->vals->cap_unix & ses->capabilities; } +struct cached_fid { + bool is_valid:1; /* Do we have a useable root fid */ + struct cifs_fid *fid; + struct mutex fid_mutex; + struct cifs_tcon *tcon; + struct work_struct lease_break; +}; + /* * there is one of these for each connection to a resource on a particular * session @@ -987,9 +1023,7 @@ struct cifs_tcon { struct fscache_cookie *fscache; /* cookie for share */ #endif struct list_head pending_opens; /* list of incomplete opens */ - bool valid_root_fid:1; /* Do we have a useable root fid */ - struct mutex prfid_mutex; /* prevents reopen race after dead ses*/ - struct cifs_fid *prfid; /* handle to the directory at top of share */ + struct cached_fid crfid; /* Cached root fid */ /* BB add field for back pointer to sb struct(s)? */ }; diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 4e0d183c3d10..03018be17283 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -112,10 +112,6 @@ extern int SendReceive2(const unsigned int /* xid */ , struct cifs_ses *, struct kvec *, int /* nvec to send */, int * /* type of buf returned */, const int flags, struct kvec * /* resp vec */); -extern int smb2_send_recv(const unsigned int xid, struct cifs_ses *pses, - struct kvec *pkvec, int nvec_to_send, - int *pbuftype, const int flags, - struct kvec *presp); extern int SendReceiveBlockingLock(const unsigned int xid, struct cifs_tcon *ptcon, struct smb_hdr *in_buf , @@ -544,7 +540,7 @@ int cifs_create_mf_symlink(unsigned int xid, struct cifs_tcon *tcon, struct cifs_sb_info *cifs_sb, const unsigned char *path, char *pbuf, unsigned int *pbytes_written); -int __cifs_calc_signature(struct smb_rqst *rqst, int start, +int __cifs_calc_signature(struct smb_rqst *rqst, struct TCP_Server_Info *server, char *signature, struct shash_desc *shash); enum securityEnum cifs_select_sectype(struct TCP_Server_Info *, @@ -552,6 +548,7 @@ enum securityEnum cifs_select_sectype(struct TCP_Server_Info *, struct cifs_aio_ctx *cifs_aio_ctx_alloc(void); void cifs_aio_ctx_release(struct kref *refcount); int setup_aio_ctx_iter(struct cifs_aio_ctx *ctx, struct iov_iter *iter, int rw); +void smb2_cached_lease_break(struct work_struct *work); int cifs_alloc_hash(const char *name, struct crypto_shash **shash, struct sdesc **sdesc); diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 42329b25877d..d352da325de3 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -107,10 +107,10 @@ cifs_mark_open_files_invalid(struct cifs_tcon *tcon) } spin_unlock(&tcon->open_file_lock); - mutex_lock(&tcon->prfid_mutex); - tcon->valid_root_fid = false; - memset(tcon->prfid, 0, sizeof(struct cifs_fid)); - mutex_unlock(&tcon->prfid_mutex); + mutex_lock(&tcon->crfid.fid_mutex); + tcon->crfid.is_valid = false; + memset(tcon->crfid.fid, 0, sizeof(struct cifs_fid)); + mutex_unlock(&tcon->crfid.fid_mutex); /* * BB Add call to invalidate_inodes(sb) for all superblocks mounted diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 96645a7d8f27..a57da1b88bdf 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -57,9 +57,6 @@ #include "smb2proto.h" #include "smbdirect.h" -#define CIFS_PORT 445 -#define RFC1001_PORT 139 - extern mempool_t *cifs_req_poolp; extern bool disable_legacy_dialects; @@ -3029,8 +3026,11 @@ cifs_get_tcon(struct cifs_ses *ses, struct smb_vol *volume_info) #ifdef CONFIG_CIFS_SMB311 if ((volume_info->linux_ext) && (ses->server->posix_ext_supported)) { - if (ses->server->vals->protocol_id == SMB311_PROT_ID) + if (ses->server->vals->protocol_id == SMB311_PROT_ID) { tcon->posix_extensions = true; + printk_once(KERN_WARNING + "SMB3.11 POSIX Extensions are experimental\n"); + } } #endif /* 311 */ diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index f4697f548a39..a2cfb33e85c1 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -1575,6 +1575,17 @@ int cifs_mkdir(struct inode *inode, struct dentry *direntry, umode_t mode) goto mkdir_out; } + server = tcon->ses->server; + +#ifdef CONFIG_CIFS_SMB311 + if ((server->ops->posix_mkdir) && (tcon->posix_extensions)) { + rc = server->ops->posix_mkdir(xid, inode, mode, tcon, full_path, + cifs_sb); + d_drop(direntry); /* for time being always refresh inode info */ + goto mkdir_out; + } +#endif /* SMB311 */ + if (cap_unix(tcon->ses) && (CIFS_UNIX_POSIX_PATH_OPS_CAP & le64_to_cpu(tcon->fsUnixInfo.Capability))) { rc = cifs_posix_mkdir(inode, direntry, mode, full_path, cifs_sb, @@ -1583,8 +1594,6 @@ int cifs_mkdir(struct inode *inode, struct dentry *direntry, umode_t mode) goto mkdir_out; } - server = tcon->ses->server; - if (!server->ops->mkdir) { rc = -ENOSYS; goto mkdir_out; diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c index af29ade195c0..53e8362cbc4a 100644 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -82,6 +82,7 @@ sesInfoAlloc(void) INIT_LIST_HEAD(&ret_buf->smb_ses_list); INIT_LIST_HEAD(&ret_buf->tcon_list); mutex_init(&ret_buf->session_mutex); + spin_lock_init(&ret_buf->iface_lock); } return ret_buf; } @@ -102,6 +103,7 @@ sesInfoFree(struct cifs_ses *buf_to_free) kfree(buf_to_free->user_name); kfree(buf_to_free->domainName); kzfree(buf_to_free->auth_key.response); + kfree(buf_to_free->iface_list); kzfree(buf_to_free); } @@ -117,8 +119,9 @@ tconInfoAlloc(void) INIT_LIST_HEAD(&ret_buf->openFileList); INIT_LIST_HEAD(&ret_buf->tcon_list); spin_lock_init(&ret_buf->open_file_lock); - mutex_init(&ret_buf->prfid_mutex); - ret_buf->prfid = kzalloc(sizeof(struct cifs_fid), GFP_KERNEL); + mutex_init(&ret_buf->crfid.fid_mutex); + ret_buf->crfid.fid = kzalloc(sizeof(struct cifs_fid), + GFP_KERNEL); #ifdef CONFIG_CIFS_STATS spin_lock_init(&ret_buf->stat_lock); #endif @@ -136,7 +139,7 @@ tconInfoFree(struct cifs_tcon *buf_to_free) atomic_dec(&tconInfoAllocCount); kfree(buf_to_free->nativeFileSystem); kzfree(buf_to_free->password); - kfree(buf_to_free->prfid); + kfree(buf_to_free->crfid.fid); kfree(buf_to_free); } diff --git a/fs/cifs/smb2misc.c b/fs/cifs/smb2misc.c index e2bec47c6845..3ff7cec2da81 100644 --- a/fs/cifs/smb2misc.c +++ b/fs/cifs/smb2misc.c @@ -454,7 +454,8 @@ cifs_convert_path_to_utf16(const char *from, struct cifs_sb_info *cifs_sb) #ifdef CONFIG_CIFS_SMB311 /* SMB311 POSIX extensions paths do not include leading slash */ else if (cifs_sb_master_tlink(cifs_sb) && - cifs_sb_master_tcon(cifs_sb)->posix_extensions) { + cifs_sb_master_tcon(cifs_sb)->posix_extensions && + (from[0] == '/')) { start_of_path = from + 1; } #endif /* 311 */ @@ -492,10 +493,11 @@ cifs_ses_oplock_break(struct work_struct *work) { struct smb2_lease_break_work *lw = container_of(work, struct smb2_lease_break_work, lease_break); - int rc; + int rc = 0; rc = SMB2_lease_break(0, tlink_tcon(lw->tlink), lw->lease_key, lw->lease_state); + cifs_dbg(FYI, "Lease release rc %d\n", rc); cifs_put_tlink(lw->tlink); kfree(lw); @@ -561,6 +563,7 @@ smb2_tcon_has_lease(struct cifs_tcon *tcon, struct smb2_lease_break *rsp, open->oplock = lease_state; } + return found; } @@ -603,6 +606,18 @@ smb2_is_valid_lease_break(char *buffer) return true; } spin_unlock(&tcon->open_file_lock); + + if (tcon->crfid.is_valid && + !memcmp(rsp->LeaseKey, + tcon->crfid.fid->lease_key, + SMB2_LEASE_KEY_SIZE)) { + INIT_WORK(&tcon->crfid.lease_break, + smb2_cached_lease_break); + queue_work(cifsiod_wq, + &tcon->crfid.lease_break); + spin_unlock(&cifs_tcp_ses_lock); + return true; + } } } } diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c index b15f5957d645..0356b5559c71 100644 --- a/fs/cifs/smb2ops.c +++ b/fs/cifs/smb2ops.c @@ -294,34 +294,191 @@ smb2_negotiate_rsize(struct cifs_tcon *tcon, struct smb_vol *volume_info) return rsize; } -#ifdef CONFIG_CIFS_STATS2 + +static int +parse_server_interfaces(struct network_interface_info_ioctl_rsp *buf, + size_t buf_len, + struct cifs_server_iface **iface_list, + size_t *iface_count) +{ + struct network_interface_info_ioctl_rsp *p; + struct sockaddr_in *addr4; + struct sockaddr_in6 *addr6; + struct iface_info_ipv4 *p4; + struct iface_info_ipv6 *p6; + struct cifs_server_iface *info; + ssize_t bytes_left; + size_t next = 0; + int nb_iface = 0; + int rc = 0; + + *iface_list = NULL; + *iface_count = 0; + + /* + * Fist pass: count and sanity check + */ + + bytes_left = buf_len; + p = buf; + while (bytes_left >= sizeof(*p)) { + nb_iface++; + next = le32_to_cpu(p->Next); + if (!next) { + bytes_left -= sizeof(*p); + break; + } + p = (struct network_interface_info_ioctl_rsp *)((u8 *)p+next); + bytes_left -= next; + } + + if (!nb_iface) { + cifs_dbg(VFS, "%s: malformed interface info\n", __func__); + rc = -EINVAL; + goto out; + } + + if (bytes_left || p->Next) + cifs_dbg(VFS, "%s: incomplete interface info\n", __func__); + + + /* + * Second pass: extract info to internal structure + */ + + *iface_list = kcalloc(nb_iface, sizeof(**iface_list), GFP_KERNEL); + if (!*iface_list) { + rc = -ENOMEM; + goto out; + } + + info = *iface_list; + bytes_left = buf_len; + p = buf; + while (bytes_left >= sizeof(*p)) { + info->speed = le64_to_cpu(p->LinkSpeed); + info->rdma_capable = le32_to_cpu(p->Capability & RDMA_CAPABLE); + info->rss_capable = le32_to_cpu(p->Capability & RSS_CAPABLE); + + cifs_dbg(FYI, "%s: adding iface %zu\n", __func__, *iface_count); + cifs_dbg(FYI, "%s: speed %zu bps\n", __func__, info->speed); + cifs_dbg(FYI, "%s: capabilities 0x%08x\n", __func__, + le32_to_cpu(p->Capability)); + + switch (p->Family) { + /* + * The kernel and wire socket structures have the same + * layout and use network byte order but make the + * conversion explicit in case either one changes. + */ + case INTERNETWORK: + addr4 = (struct sockaddr_in *)&info->sockaddr; + p4 = (struct iface_info_ipv4 *)p->Buffer; + addr4->sin_family = AF_INET; + memcpy(&addr4->sin_addr, &p4->IPv4Address, 4); + + /* [MS-SMB2] 2.2.32.5.1.1 Clients MUST ignore these */ + addr4->sin_port = cpu_to_be16(CIFS_PORT); + + cifs_dbg(FYI, "%s: ipv4 %pI4\n", __func__, + &addr4->sin_addr); + break; + case INTERNETWORKV6: + addr6 = (struct sockaddr_in6 *)&info->sockaddr; + p6 = (struct iface_info_ipv6 *)p->Buffer; + addr6->sin6_family = AF_INET6; + memcpy(&addr6->sin6_addr, &p6->IPv6Address, 16); + + /* [MS-SMB2] 2.2.32.5.1.2 Clients MUST ignore these */ + addr6->sin6_flowinfo = 0; + addr6->sin6_scope_id = 0; + addr6->sin6_port = cpu_to_be16(CIFS_PORT); + + cifs_dbg(FYI, "%s: ipv6 %pI6\n", __func__, + &addr6->sin6_addr); + break; + default: + cifs_dbg(VFS, + "%s: skipping unsupported socket family\n", + __func__); + goto next_iface; + } + + (*iface_count)++; + info++; +next_iface: + next = le32_to_cpu(p->Next); + if (!next) + break; + p = (struct network_interface_info_ioctl_rsp *)((u8 *)p+next); + bytes_left -= next; + } + + if (!*iface_count) { + rc = -EINVAL; + goto out; + } + +out: + if (rc) { + kfree(*iface_list); + *iface_count = 0; + *iface_list = NULL; + } + return rc; +} + + static int SMB3_request_interfaces(const unsigned int xid, struct cifs_tcon *tcon) { int rc; unsigned int ret_data_len = 0; - struct network_interface_info_ioctl_rsp *out_buf; + struct network_interface_info_ioctl_rsp *out_buf = NULL; + struct cifs_server_iface *iface_list; + size_t iface_count; + struct cifs_ses *ses = tcon->ses; rc = SMB2_ioctl(xid, tcon, NO_FILE_ID, NO_FILE_ID, FSCTL_QUERY_NETWORK_INTERFACE_INFO, true /* is_fsctl */, NULL /* no data input */, 0 /* no data input */, (char **)&out_buf, &ret_data_len); - if (rc != 0) + if (rc != 0) { cifs_dbg(VFS, "error %d on ioctl to get interface list\n", rc); - else if (ret_data_len < sizeof(struct network_interface_info_ioctl_rsp)) { - cifs_dbg(VFS, "server returned bad net interface info buf\n"); - rc = -EINVAL; - } else { - /* Dump info on first interface */ - cifs_dbg(FYI, "Adapter Capability 0x%x\t", - le32_to_cpu(out_buf->Capability)); - cifs_dbg(FYI, "Link Speed %lld\n", - le64_to_cpu(out_buf->LinkSpeed)); + goto out; } + + rc = parse_server_interfaces(out_buf, ret_data_len, + &iface_list, &iface_count); + if (rc) + goto out; + + spin_lock(&ses->iface_lock); + kfree(ses->iface_list); + ses->iface_list = iface_list; + ses->iface_count = iface_count; + ses->iface_last_update = jiffies; + spin_unlock(&ses->iface_lock); + +out: kfree(out_buf); return rc; } -#endif /* STATS2 */ + +void +smb2_cached_lease_break(struct work_struct *work) +{ + struct cached_fid *cfid = container_of(work, + struct cached_fid, lease_break); + mutex_lock(&cfid->fid_mutex); + if (cfid->is_valid) { + cifs_dbg(FYI, "clear cached root file handle\n"); + SMB2_close(0, cfid->tcon, cfid->fid->persistent_fid, + cfid->fid->volatile_fid); + cfid->is_valid = false; + } + mutex_unlock(&cfid->fid_mutex); +} /* * Open the directory at the root of a share @@ -331,13 +488,13 @@ int open_shroot(unsigned int xid, struct cifs_tcon *tcon, struct cifs_fid *pfid) struct cifs_open_parms oparams; int rc; __le16 srch_path = 0; /* Null - since an open of top of share */ - u8 oplock = SMB2_OPLOCK_LEVEL_NONE; + u8 oplock = SMB2_OPLOCK_LEVEL_II; - mutex_lock(&tcon->prfid_mutex); - if (tcon->valid_root_fid) { + mutex_lock(&tcon->crfid.fid_mutex); + if (tcon->crfid.is_valid) { cifs_dbg(FYI, "found a cached root file handle\n"); - memcpy(pfid, tcon->prfid, sizeof(struct cifs_fid)); - mutex_unlock(&tcon->prfid_mutex); + memcpy(pfid, tcon->crfid.fid, sizeof(struct cifs_fid)); + mutex_unlock(&tcon->crfid.fid_mutex); return 0; } @@ -350,10 +507,11 @@ int open_shroot(unsigned int xid, struct cifs_tcon *tcon, struct cifs_fid *pfid) rc = SMB2_open(xid, &oparams, &srch_path, &oplock, NULL, NULL, NULL); if (rc == 0) { - memcpy(tcon->prfid, pfid, sizeof(struct cifs_fid)); - tcon->valid_root_fid = true; + memcpy(tcon->crfid.fid, pfid, sizeof(struct cifs_fid)); + tcon->crfid.tcon = tcon; + tcon->crfid.is_valid = true; } - mutex_unlock(&tcon->prfid_mutex); + mutex_unlock(&tcon->crfid.fid_mutex); return rc; } @@ -383,9 +541,7 @@ smb3_qfs_tcon(const unsigned int xid, struct cifs_tcon *tcon) if (rc) return; -#ifdef CONFIG_CIFS_STATS2 SMB3_request_interfaces(xid, tcon); -#endif /* STATS2 */ SMB2_QFS_attr(xid, tcon, fid.persistent_fid, fid.volatile_fid, FS_ATTRIBUTE_INFORMATION); @@ -436,7 +592,7 @@ smb2_is_path_accessible(const unsigned int xid, struct cifs_tcon *tcon, struct cifs_open_parms oparms; struct cifs_fid fid; - if ((*full_path == 0) && tcon->valid_root_fid) + if ((*full_path == 0) && tcon->crfid.is_valid) return 0; utf16_path = cifs_convert_path_to_utf16(full_path, cifs_sb); @@ -2151,7 +2307,7 @@ fill_transform_hdr(struct smb2_transform_hdr *tr_hdr, unsigned int orig_len, struct smb_rqst *old_rq) { struct smb2_sync_hdr *shdr = - (struct smb2_sync_hdr *)old_rq->rq_iov[1].iov_base; + (struct smb2_sync_hdr *)old_rq->rq_iov[0].iov_base; memset(tr_hdr, 0, sizeof(struct smb2_transform_hdr)); tr_hdr->ProtocolId = SMB2_TRANSFORM_PROTO_NUM; @@ -2171,14 +2327,13 @@ static inline void smb2_sg_set_buf(struct scatterlist *sg, const void *buf, } /* Assumes: - * rqst->rq_iov[0] is rfc1002 length - * rqst->rq_iov[1] is tranform header - * rqst->rq_iov[2+] data to be encrypted/decrypted + * rqst->rq_iov[0] is transform header + * rqst->rq_iov[1+] data to be encrypted/decrypted */ static struct scatterlist * init_sg(struct smb_rqst *rqst, u8 *sign) { - unsigned int sg_len = rqst->rq_nvec + rqst->rq_npages; + unsigned int sg_len = rqst->rq_nvec + rqst->rq_npages + 1; unsigned int assoc_data_len = sizeof(struct smb2_transform_hdr) - 20; struct scatterlist *sg; unsigned int i; @@ -2189,10 +2344,10 @@ init_sg(struct smb_rqst *rqst, u8 *sign) return NULL; sg_init_table(sg, sg_len); - smb2_sg_set_buf(&sg[0], rqst->rq_iov[1].iov_base + 20, assoc_data_len); - for (i = 1; i < rqst->rq_nvec - 1; i++) - smb2_sg_set_buf(&sg[i], rqst->rq_iov[i+1].iov_base, - rqst->rq_iov[i+1].iov_len); + smb2_sg_set_buf(&sg[0], rqst->rq_iov[0].iov_base + 20, assoc_data_len); + for (i = 1; i < rqst->rq_nvec; i++) + smb2_sg_set_buf(&sg[i], rqst->rq_iov[i].iov_base, + rqst->rq_iov[i].iov_len); for (j = 0; i < sg_len - 1; i++, j++) { unsigned int len, offset; @@ -2224,18 +2379,17 @@ smb2_get_enc_key(struct TCP_Server_Info *server, __u64 ses_id, int enc, u8 *key) return 1; } /* - * Encrypt or decrypt @rqst message. @rqst has the following format: - * iov[0] - rfc1002 length - * iov[1] - transform header (associate data), - * iov[2-N] and pages - data to encrypt. - * On success return encrypted data in iov[2-N] and pages, leave iov[0-1] + * Encrypt or decrypt @rqst message. @rqst[0] has the following format: + * iov[0] - transform header (associate data), + * iov[1-N] - SMB2 header and pages - data to encrypt. + * On success return encrypted data in iov[1-N] and pages, leave iov[0] * untouched. */ static int crypt_message(struct TCP_Server_Info *server, struct smb_rqst *rqst, int enc) { struct smb2_transform_hdr *tr_hdr = - (struct smb2_transform_hdr *)rqst->rq_iov[1].iov_base; + (struct smb2_transform_hdr *)rqst->rq_iov[0].iov_base; unsigned int assoc_data_len = sizeof(struct smb2_transform_hdr) - 20; int rc = 0; struct scatterlist *sg; @@ -2323,10 +2477,6 @@ free_req: return rc; } -/* - * This is called from smb_send_rqst. At this point we have the rfc1002 - * header as the first element in the vector. - */ static int smb3_init_transform_rq(struct TCP_Server_Info *server, struct smb_rqst *new_rq, struct smb_rqst *old_rq) @@ -2335,7 +2485,7 @@ smb3_init_transform_rq(struct TCP_Server_Info *server, struct smb_rqst *new_rq, struct page **pages; struct smb2_transform_hdr *tr_hdr; unsigned int npages = old_rq->rq_npages; - unsigned int orig_len = get_rfc1002_length(old_rq->rq_iov[0].iov_base); + unsigned int orig_len; int i; int rc = -ENOMEM; @@ -2355,18 +2505,14 @@ smb3_init_transform_rq(struct TCP_Server_Info *server, struct smb_rqst *new_rq, goto err_free_pages; } - /* Make space for one extra iov to hold the transform header */ iov = kmalloc_array(old_rq->rq_nvec + 1, sizeof(struct kvec), GFP_KERNEL); if (!iov) goto err_free_pages; - /* copy all iovs from the old except the 1st one (rfc1002 length) */ - memcpy(&iov[2], &old_rq->rq_iov[1], - sizeof(struct kvec) * (old_rq->rq_nvec - 1)); - /* copy the rfc1002 iov */ - iov[0].iov_base = old_rq->rq_iov[0].iov_base; - iov[0].iov_len = old_rq->rq_iov[0].iov_len; + /* copy all iovs from the old */ + memcpy(&iov[1], &old_rq->rq_iov[0], + sizeof(struct kvec) * old_rq->rq_nvec); new_rq->rq_iov = iov; new_rq->rq_nvec = old_rq->rq_nvec + 1; @@ -2375,14 +2521,12 @@ smb3_init_transform_rq(struct TCP_Server_Info *server, struct smb_rqst *new_rq, if (!tr_hdr) goto err_free_iov; + orig_len = smb2_rqst_len(old_rq, false); + /* fill the 2nd iov with a transform header */ fill_transform_hdr(tr_hdr, orig_len, old_rq); - new_rq->rq_iov[1].iov_base = tr_hdr; - new_rq->rq_iov[1].iov_len = sizeof(struct smb2_transform_hdr); - - /* Update rfc1002 header */ - inc_rfc1001_len(new_rq->rq_iov[0].iov_base, - sizeof(struct smb2_transform_hdr)); + new_rq->rq_iov[0].iov_base = tr_hdr; + new_rq->rq_iov[0].iov_len = sizeof(struct smb2_transform_hdr); /* copy pages form the old */ for (i = 0; i < npages; i++) { @@ -2426,7 +2570,7 @@ smb3_free_transform_rq(struct smb_rqst *rqst) put_page(rqst->rq_pages[i]); kfree(rqst->rq_pages); /* free transform header */ - kfree(rqst->rq_iov[1].iov_base); + kfree(rqst->rq_iov[0].iov_base); kfree(rqst->rq_iov); } @@ -2443,19 +2587,17 @@ decrypt_raw_data(struct TCP_Server_Info *server, char *buf, unsigned int buf_data_size, struct page **pages, unsigned int npages, unsigned int page_data_size) { - struct kvec iov[3]; + struct kvec iov[2]; struct smb_rqst rqst = {NULL}; int rc; - iov[0].iov_base = NULL; - iov[0].iov_len = 0; - iov[1].iov_base = buf; - iov[1].iov_len = sizeof(struct smb2_transform_hdr); - iov[2].iov_base = buf + sizeof(struct smb2_transform_hdr); - iov[2].iov_len = buf_data_size; + iov[0].iov_base = buf; + iov[0].iov_len = sizeof(struct smb2_transform_hdr); + iov[1].iov_base = buf + sizeof(struct smb2_transform_hdr); + iov[1].iov_len = buf_data_size; rqst.rq_iov = iov; - rqst.rq_nvec = 3; + rqst.rq_nvec = 2; rqst.rq_pages = pages; rqst.rq_npages = npages; rqst.rq_pagesz = PAGE_SIZE; @@ -2467,7 +2609,7 @@ decrypt_raw_data(struct TCP_Server_Info *server, char *buf, if (rc) return rc; - memmove(buf, iov[2].iov_base, buf_data_size); + memmove(buf, iov[1].iov_base, buf_data_size); server->total_read = buf_data_size + page_data_size; @@ -3170,6 +3312,7 @@ struct smb_version_operations smb311_operations = { .set_compression = smb2_set_compression, .mkdir = smb2_mkdir, .mkdir_setinfo = smb2_mkdir_setinfo, + .posix_mkdir = smb311_posix_mkdir, .rmdir = smb2_rmdir, .unlink = smb2_unlink, .rename = smb2_rename_path, diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index af032e1a3eac..810b85787c91 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -602,6 +602,7 @@ static void assemble_neg_contexts(struct smb2_negotiate_req *req, int SMB2_negotiate(const unsigned int xid, struct cifs_ses *ses) { + struct smb_rqst rqst; struct smb2_negotiate_req *req; struct smb2_negotiate_rsp *rsp; struct kvec iov[1]; @@ -673,7 +674,11 @@ SMB2_negotiate(const unsigned int xid, struct cifs_ses *ses) iov[0].iov_base = (char *)req; iov[0].iov_len = total_len; - rc = smb2_send_recv(xid, ses, iov, 1, &resp_buftype, flags, &rsp_iov); + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = iov; + rqst.rq_nvec = 1; + + rc = cifs_send_recv(xid, ses, &rqst, &resp_buftype, flags, &rsp_iov); cifs_small_buf_release(req); rsp = (struct smb2_negotiate_rsp *)rsp_iov.iov_base; /* @@ -990,8 +995,9 @@ SMB2_sess_alloc_buffer(struct SMB2_sess_data *sess_data) req->PreviousSessionId = sess_data->previous_session; req->Flags = 0; /* MBZ */ - /* to enable echos and oplocks */ - req->sync_hdr.CreditRequest = cpu_to_le16(3); + + /* enough to enable echos and oplocks and one max size write */ + req->sync_hdr.CreditRequest = cpu_to_le16(130); /* only one of SMB2 signing flags may be set in SMB2 request */ if (server->sign) @@ -1027,6 +1033,7 @@ static int SMB2_sess_sendreceive(struct SMB2_sess_data *sess_data) { int rc; + struct smb_rqst rqst; struct smb2_sess_setup_req *req = sess_data->iov[0].iov_base; struct kvec rsp_iov = { NULL, 0 }; @@ -1035,10 +1042,13 @@ SMB2_sess_sendreceive(struct SMB2_sess_data *sess_data) cpu_to_le16(sizeof(struct smb2_sess_setup_req) - 1 /* pad */); req->SecurityBufferLength = cpu_to_le16(sess_data->iov[1].iov_len); - /* BB add code to build os and lm fields */ + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = sess_data->iov; + rqst.rq_nvec = 2; - rc = smb2_send_recv(sess_data->xid, sess_data->ses, - sess_data->iov, 2, + /* BB add code to build os and lm fields */ + rc = cifs_send_recv(sess_data->xid, sess_data->ses, + &rqst, &sess_data->buf0_type, CIFS_LOG_ERROR | CIFS_NEG_OP, &rsp_iov); cifs_small_buf_release(sess_data->iov[0].iov_base); @@ -1376,6 +1386,7 @@ out: int SMB2_logoff(const unsigned int xid, struct cifs_ses *ses) { + struct smb_rqst rqst; struct smb2_logoff_req *req; /* response is also trivial struct */ int rc = 0; struct TCP_Server_Info *server; @@ -1413,7 +1424,11 @@ SMB2_logoff(const unsigned int xid, struct cifs_ses *ses) iov[0].iov_base = (char *)req; iov[0].iov_len = total_len; - rc = smb2_send_recv(xid, ses, iov, 1, &resp_buf_type, flags, &rsp_iov); + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = iov; + rqst.rq_nvec = 1; + + rc = cifs_send_recv(xid, ses, &rqst, &resp_buf_type, flags, &rsp_iov); cifs_small_buf_release(req); /* * No tcon so can't do @@ -1443,6 +1458,7 @@ int SMB2_tcon(const unsigned int xid, struct cifs_ses *ses, const char *tree, struct cifs_tcon *tcon, const struct nls_table *cp) { + struct smb_rqst rqst; struct smb2_tree_connect_req *req; struct smb2_tree_connect_rsp *rsp = NULL; struct kvec iov[2]; @@ -1499,7 +1515,11 @@ SMB2_tcon(const unsigned int xid, struct cifs_ses *ses, const char *tree, !smb3_encryption_required(tcon)) req->sync_hdr.Flags |= SMB2_FLAGS_SIGNED; - rc = smb2_send_recv(xid, ses, iov, 2, &resp_buftype, flags, &rsp_iov); + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = iov; + rqst.rq_nvec = 2; + + rc = cifs_send_recv(xid, ses, &rqst, &resp_buftype, flags, &rsp_iov); cifs_small_buf_release(req); rsp = (struct smb2_tree_connect_rsp *)rsp_iov.iov_base; @@ -1563,6 +1583,7 @@ tcon_error_exit: int SMB2_tdis(const unsigned int xid, struct cifs_tcon *tcon) { + struct smb_rqst rqst; struct smb2_tree_disconnect_req *req; /* response is trivial */ int rc = 0; struct cifs_ses *ses = tcon->ses; @@ -1593,7 +1614,11 @@ SMB2_tdis(const unsigned int xid, struct cifs_tcon *tcon) iov[0].iov_base = (char *)req; iov[0].iov_len = total_len; - rc = smb2_send_recv(xid, ses, iov, 1, &resp_buf_type, flags, &rsp_iov); + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = iov; + rqst.rq_nvec = 1; + + rc = cifs_send_recv(xid, ses, &rqst, &resp_buf_type, flags, &rsp_iov); cifs_small_buf_release(req); if (rc) cifs_stats_fail_inc(tcon, SMB2_TREE_DISCONNECT_HE); @@ -1886,11 +1911,165 @@ alloc_path_with_tree_prefix(__le16 **out_path, int *out_size, int *out_len, return 0; } +#ifdef CONFIG_CIFS_SMB311 +int smb311_posix_mkdir(const unsigned int xid, struct inode *inode, + umode_t mode, struct cifs_tcon *tcon, + const char *full_path, + struct cifs_sb_info *cifs_sb) +{ + struct smb_rqst rqst; + struct smb2_create_req *req; + struct smb2_create_rsp *rsp; + struct TCP_Server_Info *server; + struct cifs_ses *ses = tcon->ses; + struct kvec iov[3]; /* make sure at least one for each open context */ + struct kvec rsp_iov = {NULL, 0}; + int resp_buftype; + int uni_path_len; + __le16 *copy_path = NULL; + int copy_size; + int rc = 0; + unsigned int n_iov = 2; + __u32 file_attributes = 0; + char *pc_buf = NULL; + int flags = 0; + unsigned int total_len; + __le16 *path = cifs_convert_path_to_utf16(full_path, cifs_sb); + + if (!path) + return -ENOMEM; + + cifs_dbg(FYI, "mkdir\n"); + + if (ses && (ses->server)) + server = ses->server; + else + return -EIO; + + rc = smb2_plain_req_init(SMB2_CREATE, tcon, (void **) &req, &total_len); + + if (rc) + return rc; + + if (smb3_encryption_required(tcon)) + flags |= CIFS_TRANSFORM_REQ; + + + req->ImpersonationLevel = IL_IMPERSONATION; + req->DesiredAccess = cpu_to_le32(FILE_WRITE_ATTRIBUTES); + /* File attributes ignored on open (used in create though) */ + req->FileAttributes = cpu_to_le32(file_attributes); + req->ShareAccess = FILE_SHARE_ALL_LE; + req->CreateDisposition = cpu_to_le32(FILE_CREATE); + req->CreateOptions = cpu_to_le32(CREATE_NOT_FILE); + + iov[0].iov_base = (char *)req; + /* -1 since last byte is buf[0] which is sent below (path) */ + iov[0].iov_len = total_len - 1; + + req->NameOffset = cpu_to_le16(sizeof(struct smb2_create_req)); + + /* [MS-SMB2] 2.2.13 NameOffset: + * If SMB2_FLAGS_DFS_OPERATIONS is set in the Flags field of + * the SMB2 header, the file name includes a prefix that will + * be processed during DFS name normalization as specified in + * section 3.3.5.9. Otherwise, the file name is relative to + * the share that is identified by the TreeId in the SMB2 + * header. + */ + if (tcon->share_flags & SHI1005_FLAGS_DFS) { + int name_len; + + req->sync_hdr.Flags |= SMB2_FLAGS_DFS_OPERATIONS; + rc = alloc_path_with_tree_prefix(©_path, ©_size, + &name_len, + tcon->treeName, path); + if (rc) { + cifs_small_buf_release(req); + return rc; + } + req->NameLength = cpu_to_le16(name_len * 2); + uni_path_len = copy_size; + path = copy_path; + } else { + uni_path_len = (2 * UniStrnlen((wchar_t *)path, PATH_MAX)) + 2; + /* MUST set path len (NameLength) to 0 opening root of share */ + req->NameLength = cpu_to_le16(uni_path_len - 2); + if (uni_path_len % 8 != 0) { + copy_size = roundup(uni_path_len, 8); + copy_path = kzalloc(copy_size, GFP_KERNEL); + if (!copy_path) { + cifs_small_buf_release(req); + return -ENOMEM; + } + memcpy((char *)copy_path, (const char *)path, + uni_path_len); + uni_path_len = copy_size; + path = copy_path; + } + } + + iov[1].iov_len = uni_path_len; + iov[1].iov_base = path; + req->RequestedOplockLevel = SMB2_OPLOCK_LEVEL_NONE; + + if (tcon->posix_extensions) { + if (n_iov > 2) { + struct create_context *ccontext = + (struct create_context *)iov[n_iov-1].iov_base; + ccontext->Next = + cpu_to_le32(iov[n_iov-1].iov_len); + } + + rc = add_posix_context(iov, &n_iov, mode); + if (rc) { + cifs_small_buf_release(req); + kfree(copy_path); + return rc; + } + pc_buf = iov[n_iov-1].iov_base; + } + + + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = iov; + rqst.rq_nvec = n_iov; + + rc = cifs_send_recv(xid, ses, &rqst, &resp_buftype, flags, + &rsp_iov); + + cifs_small_buf_release(req); + rsp = (struct smb2_create_rsp *)rsp_iov.iov_base; + + if (rc != 0) { + cifs_stats_fail_inc(tcon, SMB2_CREATE_HE); + trace_smb3_posix_mkdir_err(xid, tcon->tid, ses->Suid, + CREATE_NOT_FILE, FILE_WRITE_ATTRIBUTES, rc); + goto smb311_mkdir_exit; + } else + trace_smb3_posix_mkdir_done(xid, rsp->PersistentFileId, tcon->tid, + ses->Suid, CREATE_NOT_FILE, + FILE_WRITE_ATTRIBUTES); + + SMB2_close(xid, tcon, rsp->PersistentFileId, rsp->VolatileFileId); + + /* Eventually save off posix specific response info and timestaps */ + +smb311_mkdir_exit: + kfree(copy_path); + kfree(pc_buf); + free_rsp_buf(resp_buftype, rsp); + return rc; + +} +#endif /* SMB311 */ + int SMB2_open(const unsigned int xid, struct cifs_open_parms *oparms, __le16 *path, __u8 *oplock, struct smb2_file_all_info *buf, struct kvec *err_iov, int *buftype) { + struct smb_rqst rqst; struct smb2_create_req *req; struct smb2_create_rsp *rsp; struct TCP_Server_Info *server; @@ -2043,7 +2222,11 @@ SMB2_open(const unsigned int xid, struct cifs_open_parms *oparms, __le16 *path, } #endif /* SMB311 */ - rc = smb2_send_recv(xid, ses, iov, n_iov, &resp_buftype, flags, + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = iov; + rqst.rq_nvec = n_iov; + + rc = cifs_send_recv(xid, ses, &rqst, &resp_buftype, flags, &rsp_iov); cifs_small_buf_release(req); rsp = (struct smb2_create_rsp *)rsp_iov.iov_base; @@ -2099,6 +2282,7 @@ SMB2_ioctl(const unsigned int xid, struct cifs_tcon *tcon, u64 persistent_fid, char *in_data, u32 indatalen, char **out_data, u32 *plen /* returned data len */) { + struct smb_rqst rqst; struct smb2_ioctl_req *req; struct smb2_ioctl_rsp *rsp; struct cifs_ses *ses; @@ -2189,7 +2373,11 @@ SMB2_ioctl(const unsigned int xid, struct cifs_tcon *tcon, u64 persistent_fid, if (opcode == FSCTL_VALIDATE_NEGOTIATE_INFO) req->sync_hdr.Flags |= SMB2_FLAGS_SIGNED; - rc = smb2_send_recv(xid, ses, iov, n_iov, &resp_buftype, flags, + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = iov; + rqst.rq_nvec = n_iov; + + rc = cifs_send_recv(xid, ses, &rqst, &resp_buftype, flags, &rsp_iov); cifs_small_buf_release(req); rsp = (struct smb2_ioctl_rsp *)rsp_iov.iov_base; @@ -2274,6 +2462,7 @@ int SMB2_close_flags(const unsigned int xid, struct cifs_tcon *tcon, u64 persistent_fid, u64 volatile_fid, int flags) { + struct smb_rqst rqst; struct smb2_close_req *req; struct smb2_close_rsp *rsp; struct cifs_ses *ses = tcon->ses; @@ -2301,7 +2490,11 @@ SMB2_close_flags(const unsigned int xid, struct cifs_tcon *tcon, iov[0].iov_base = (char *)req; iov[0].iov_len = total_len; - rc = smb2_send_recv(xid, ses, iov, 1, &resp_buftype, flags, &rsp_iov); + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = iov; + rqst.rq_nvec = 1; + + rc = cifs_send_recv(xid, ses, &rqst, &resp_buftype, flags, &rsp_iov); cifs_small_buf_release(req); rsp = (struct smb2_close_rsp *)rsp_iov.iov_base; @@ -2387,6 +2580,7 @@ query_info(const unsigned int xid, struct cifs_tcon *tcon, u32 additional_info, size_t output_len, size_t min_len, void **data, u32 *dlen) { + struct smb_rqst rqst; struct smb2_query_info_req *req; struct smb2_query_info_rsp *rsp = NULL; struct kvec iov[2]; @@ -2427,7 +2621,11 @@ query_info(const unsigned int xid, struct cifs_tcon *tcon, /* 1 for Buffer */ iov[0].iov_len = total_len - 1; - rc = smb2_send_recv(xid, ses, iov, 1, &resp_buftype, flags, &rsp_iov); + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = iov; + rqst.rq_nvec = 1; + + rc = cifs_send_recv(xid, ses, &rqst, &resp_buftype, flags, &rsp_iov); cifs_small_buf_release(req); rsp = (struct smb2_query_info_rsp *)rsp_iov.iov_base; @@ -2594,11 +2792,10 @@ SMB2_echo(struct TCP_Server_Info *server) { struct smb2_echo_req *req; int rc = 0; - struct kvec iov[2]; + struct kvec iov[1]; struct smb_rqst rqst = { .rq_iov = iov, - .rq_nvec = 2 }; + .rq_nvec = 1 }; unsigned int total_len; - __be32 rfc1002_marker; cifs_dbg(FYI, "In echo request\n"); @@ -2614,11 +2811,8 @@ SMB2_echo(struct TCP_Server_Info *server) req->sync_hdr.CreditRequest = cpu_to_le16(1); - iov[0].iov_len = 4; - rfc1002_marker = cpu_to_be32(total_len); - iov[0].iov_base = &rfc1002_marker; - iov[1].iov_len = total_len; - iov[1].iov_base = (char *)req; + iov[0].iov_len = total_len; + iov[0].iov_base = (char *)req; rc = cifs_call_async(server, &rqst, NULL, smb2_echo_callback, NULL, server, CIFS_ECHO_OP); @@ -2633,6 +2827,7 @@ int SMB2_flush(const unsigned int xid, struct cifs_tcon *tcon, u64 persistent_fid, u64 volatile_fid) { + struct smb_rqst rqst; struct smb2_flush_req *req; struct cifs_ses *ses = tcon->ses; struct kvec iov[1]; @@ -2660,7 +2855,11 @@ SMB2_flush(const unsigned int xid, struct cifs_tcon *tcon, u64 persistent_fid, iov[0].iov_base = (char *)req; iov[0].iov_len = total_len; - rc = smb2_send_recv(xid, ses, iov, 1, &resp_buftype, flags, &rsp_iov); + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = iov; + rqst.rq_nvec = 1; + + rc = cifs_send_recv(xid, ses, &rqst, &resp_buftype, flags, &rsp_iov); cifs_small_buf_release(req); if (rc != 0) { @@ -2848,10 +3047,9 @@ smb2_async_readv(struct cifs_readdata *rdata) struct smb2_sync_hdr *shdr; struct cifs_io_parms io_parms; struct smb_rqst rqst = { .rq_iov = rdata->iov, - .rq_nvec = 2 }; + .rq_nvec = 1 }; struct TCP_Server_Info *server; unsigned int total_len; - __be32 req_len; cifs_dbg(FYI, "%s: offset=%llu bytes=%u\n", __func__, rdata->offset, rdata->bytes); @@ -2882,12 +3080,8 @@ smb2_async_readv(struct cifs_readdata *rdata) if (smb3_encryption_required(io_parms.tcon)) flags |= CIFS_TRANSFORM_REQ; - req_len = cpu_to_be32(total_len); - - rdata->iov[0].iov_base = &req_len; - rdata->iov[0].iov_len = sizeof(__be32); - rdata->iov[1].iov_base = buf; - rdata->iov[1].iov_len = total_len; + rdata->iov[0].iov_base = buf; + rdata->iov[0].iov_len = total_len; shdr = (struct smb2_sync_hdr *)buf; @@ -2926,6 +3120,7 @@ int SMB2_read(const unsigned int xid, struct cifs_io_parms *io_parms, unsigned int *nbytes, char **buf, int *buf_type) { + struct smb_rqst rqst; int resp_buftype, rc = -EACCES; struct smb2_read_plain_req *req = NULL; struct smb2_read_rsp *rsp = NULL; @@ -2946,7 +3141,11 @@ SMB2_read(const unsigned int xid, struct cifs_io_parms *io_parms, iov[0].iov_base = (char *)req; iov[0].iov_len = total_len; - rc = smb2_send_recv(xid, ses, iov, 1, &resp_buftype, flags, &rsp_iov); + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = iov; + rqst.rq_nvec = 1; + + rc = cifs_send_recv(xid, ses, &rqst, &resp_buftype, flags, &rsp_iov); cifs_small_buf_release(req); rsp = (struct smb2_read_rsp *)rsp_iov.iov_base; @@ -3062,10 +3261,9 @@ smb2_async_writev(struct cifs_writedata *wdata, struct smb2_sync_hdr *shdr; struct cifs_tcon *tcon = tlink_tcon(wdata->cfile->tlink); struct TCP_Server_Info *server = tcon->ses->server; - struct kvec iov[2]; + struct kvec iov[1]; struct smb_rqst rqst = { }; unsigned int total_len; - __be32 rfc1002_marker; rc = smb2_plain_req_init(SMB2_WRITE, tcon, (void **) &req, &total_len); if (rc) { @@ -3137,15 +3335,11 @@ smb2_async_writev(struct cifs_writedata *wdata, v1->length = cpu_to_le32(wdata->mr->mr->length); } #endif - /* 4 for rfc1002 length field and 1 for Buffer */ - iov[0].iov_len = 4; - rfc1002_marker = cpu_to_be32(total_len - 1 + wdata->bytes); - iov[0].iov_base = &rfc1002_marker; - iov[1].iov_len = total_len - 1; - iov[1].iov_base = (char *)req; + iov[0].iov_len = total_len - 1; + iov[0].iov_base = (char *)req; rqst.rq_iov = iov; - rqst.rq_nvec = 2; + rqst.rq_nvec = 1; rqst.rq_pages = wdata->pages; rqst.rq_offset = wdata->page_offset; rqst.rq_npages = wdata->nr_pages; @@ -3153,7 +3347,7 @@ smb2_async_writev(struct cifs_writedata *wdata, rqst.rq_tailsz = wdata->tailsz; #ifdef CONFIG_CIFS_SMB_DIRECT if (wdata->mr) { - iov[1].iov_len += sizeof(struct smbd_buffer_descriptor_v1); + iov[0].iov_len += sizeof(struct smbd_buffer_descriptor_v1); rqst.rq_npages = 0; } #endif @@ -3210,6 +3404,7 @@ int SMB2_write(const unsigned int xid, struct cifs_io_parms *io_parms, unsigned int *nbytes, struct kvec *iov, int n_vec) { + struct smb_rqst rqst; int rc = 0; struct smb2_write_req *req = NULL; struct smb2_write_rsp *rsp = NULL; @@ -3251,7 +3446,11 @@ SMB2_write(const unsigned int xid, struct cifs_io_parms *io_parms, /* 1 for Buffer */ iov[0].iov_len = total_len - 1; - rc = smb2_send_recv(xid, io_parms->tcon->ses, iov, n_vec + 1, + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = iov; + rqst.rq_nvec = n_vec + 1; + + rc = cifs_send_recv(xid, io_parms->tcon->ses, &rqst, &resp_buftype, flags, &rsp_iov); cifs_small_buf_release(req); rsp = (struct smb2_write_rsp *)rsp_iov.iov_base; @@ -3323,6 +3522,7 @@ SMB2_query_directory(const unsigned int xid, struct cifs_tcon *tcon, u64 persistent_fid, u64 volatile_fid, int index, struct cifs_search_info *srch_inf) { + struct smb_rqst rqst; struct smb2_query_directory_req *req; struct smb2_query_directory_rsp *rsp = NULL; struct kvec iov[2]; @@ -3395,7 +3595,11 @@ SMB2_query_directory(const unsigned int xid, struct cifs_tcon *tcon, iov[1].iov_base = (char *)(req->Buffer); iov[1].iov_len = len; - rc = smb2_send_recv(xid, ses, iov, 2, &resp_buftype, flags, &rsp_iov); + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = iov; + rqst.rq_nvec = 2; + + rc = cifs_send_recv(xid, ses, &rqst, &resp_buftype, flags, &rsp_iov); cifs_small_buf_release(req); rsp = (struct smb2_query_directory_rsp *)rsp_iov.iov_base; @@ -3454,6 +3658,7 @@ send_set_info(const unsigned int xid, struct cifs_tcon *tcon, u8 info_type, u32 additional_info, unsigned int num, void **data, unsigned int *size) { + struct smb_rqst rqst; struct smb2_set_info_req *req; struct smb2_set_info_rsp *rsp = NULL; struct kvec *iov; @@ -3509,7 +3714,11 @@ send_set_info(const unsigned int xid, struct cifs_tcon *tcon, iov[i].iov_len = size[i]; } - rc = smb2_send_recv(xid, ses, iov, num, &resp_buftype, flags, + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = iov; + rqst.rq_nvec = num; + + rc = cifs_send_recv(xid, ses, &rqst, &resp_buftype, flags, &rsp_iov); cifs_small_buf_release(req); rsp = (struct smb2_set_info_rsp *)rsp_iov.iov_base; @@ -3664,6 +3873,7 @@ SMB2_oplock_break(const unsigned int xid, struct cifs_tcon *tcon, const u64 persistent_fid, const u64 volatile_fid, __u8 oplock_level) { + struct smb_rqst rqst; int rc; struct smb2_oplock_break *req = NULL; struct cifs_ses *ses = tcon->ses; @@ -3692,7 +3902,11 @@ SMB2_oplock_break(const unsigned int xid, struct cifs_tcon *tcon, iov[0].iov_base = (char *)req; iov[0].iov_len = total_len; - rc = smb2_send_recv(xid, ses, iov, 1, &resp_buf_type, flags, &rsp_iov); + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = iov; + rqst.rq_nvec = 1; + + rc = cifs_send_recv(xid, ses, &rqst, &resp_buf_type, flags, &rsp_iov); cifs_small_buf_release(req); if (rc) { @@ -3755,6 +3969,7 @@ int SMB2_QFS_info(const unsigned int xid, struct cifs_tcon *tcon, u64 persistent_fid, u64 volatile_fid, struct kstatfs *fsdata) { + struct smb_rqst rqst; struct smb2_query_info_rsp *rsp = NULL; struct kvec iov; struct kvec rsp_iov; @@ -3773,7 +3988,11 @@ SMB2_QFS_info(const unsigned int xid, struct cifs_tcon *tcon, if (smb3_encryption_required(tcon)) flags |= CIFS_TRANSFORM_REQ; - rc = smb2_send_recv(xid, ses, &iov, 1, &resp_buftype, flags, &rsp_iov); + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = &iov; + rqst.rq_nvec = 1; + + rc = cifs_send_recv(xid, ses, &rqst, &resp_buftype, flags, &rsp_iov); cifs_small_buf_release(iov.iov_base); if (rc) { cifs_stats_fail_inc(tcon, SMB2_QUERY_INFO_HE); @@ -3798,6 +4017,7 @@ int SMB2_QFS_attr(const unsigned int xid, struct cifs_tcon *tcon, u64 persistent_fid, u64 volatile_fid, int level) { + struct smb_rqst rqst; struct smb2_query_info_rsp *rsp = NULL; struct kvec iov; struct kvec rsp_iov; @@ -3829,7 +4049,11 @@ SMB2_QFS_attr(const unsigned int xid, struct cifs_tcon *tcon, if (smb3_encryption_required(tcon)) flags |= CIFS_TRANSFORM_REQ; - rc = smb2_send_recv(xid, ses, &iov, 1, &resp_buftype, flags, &rsp_iov); + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = &iov; + rqst.rq_nvec = 1; + + rc = cifs_send_recv(xid, ses, &rqst, &resp_buftype, flags, &rsp_iov); cifs_small_buf_release(iov.iov_base); if (rc) { cifs_stats_fail_inc(tcon, SMB2_QUERY_INFO_HE); @@ -3868,6 +4092,7 @@ smb2_lockv(const unsigned int xid, struct cifs_tcon *tcon, const __u64 persist_fid, const __u64 volatile_fid, const __u32 pid, const __u32 num_lock, struct smb2_lock_element *buf) { + struct smb_rqst rqst; int rc = 0; struct smb2_lock_req *req = NULL; struct kvec iov[2]; @@ -3900,7 +4125,12 @@ smb2_lockv(const unsigned int xid, struct cifs_tcon *tcon, iov[1].iov_len = count; cifs_stats_inc(&tcon->stats.cifs_stats.num_locks); - rc = smb2_send_recv(xid, tcon->ses, iov, 2, &resp_buf_type, flags, + + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = iov; + rqst.rq_nvec = 2; + + rc = cifs_send_recv(xid, tcon->ses, &rqst, &resp_buf_type, flags, &rsp_iov); cifs_small_buf_release(req); if (rc) { @@ -3934,6 +4164,7 @@ int SMB2_lease_break(const unsigned int xid, struct cifs_tcon *tcon, __u8 *lease_key, const __le32 lease_state) { + struct smb_rqst rqst; int rc; struct smb2_lease_ack *req = NULL; struct cifs_ses *ses = tcon->ses; @@ -3964,7 +4195,11 @@ SMB2_lease_break(const unsigned int xid, struct cifs_tcon *tcon, iov[0].iov_base = (char *)req; iov[0].iov_len = total_len; - rc = smb2_send_recv(xid, ses, iov, 1, &resp_buf_type, flags, &rsp_iov); + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = iov; + rqst.rq_nvec = 1; + + rc = cifs_send_recv(xid, ses, &rqst, &resp_buf_type, flags, &rsp_iov); cifs_small_buf_release(req); if (rc) { diff --git a/fs/cifs/smb2pdu.h b/fs/cifs/smb2pdu.h index a345560001ce..824dddeee3f2 100644 --- a/fs/cifs/smb2pdu.h +++ b/fs/cifs/smb2pdu.h @@ -851,8 +851,11 @@ struct validate_negotiate_info_rsp { __le16 Dialect; /* Dialect in use for the connection */ } __packed; -#define RSS_CAPABLE 0x00000001 -#define RDMA_CAPABLE 0x00000002 +#define RSS_CAPABLE cpu_to_le32(0x00000001) +#define RDMA_CAPABLE cpu_to_le32(0x00000002) + +#define INTERNETWORK cpu_to_le16(0x0002) +#define INTERNETWORKV6 cpu_to_le16(0x0017) struct network_interface_info_ioctl_rsp { __le32 Next; /* next interface. zero if this is last one */ @@ -860,7 +863,21 @@ struct network_interface_info_ioctl_rsp { __le32 Capability; /* RSS or RDMA Capable */ __le32 Reserved; __le64 LinkSpeed; - char SockAddr_Storage[128]; + __le16 Family; + __u8 Buffer[126]; +} __packed; + +struct iface_info_ipv4 { + __be16 Port; + __be32 IPv4Address; + __be64 Reserved; +} __packed; + +struct iface_info_ipv6 { + __be16 Port; + __be32 FlowInfo; + __u8 IPv6Address[16]; + __be32 ScopeId; } __packed; #define NO_FILE_ID 0xFFFFFFFFFFFFFFFFULL /* general ioctls to srv not to file */ diff --git a/fs/cifs/smb2proto.h b/fs/cifs/smb2proto.h index c84020057bd8..3ae208ac2a77 100644 --- a/fs/cifs/smb2proto.h +++ b/fs/cifs/smb2proto.h @@ -79,6 +79,10 @@ extern int smb2_set_path_size(const unsigned int xid, struct cifs_tcon *tcon, struct cifs_sb_info *cifs_sb, bool set_alloc); extern int smb2_set_file_info(struct inode *inode, const char *full_path, FILE_BASIC_INFO *buf, const unsigned int xid); +extern int smb311_posix_mkdir(const unsigned int xid, struct inode *inode, + umode_t mode, struct cifs_tcon *tcon, + const char *full_path, + struct cifs_sb_info *cifs_sb); extern int smb2_mkdir(const unsigned int xid, struct cifs_tcon *tcon, const char *name, struct cifs_sb_info *cifs_sb); extern void smb2_mkdir_setinfo(struct inode *inode, const char *full_path, @@ -109,6 +113,8 @@ extern int smb2_unlock_range(struct cifsFileInfo *cfile, extern int smb2_push_mandatory_locks(struct cifsFileInfo *cfile); extern void smb2_reconnect_server(struct work_struct *work); extern int smb3_crypto_aead_allocate(struct TCP_Server_Info *server); +extern unsigned long +smb2_rqst_len(struct smb_rqst *rqst, bool skip_rfc1002_marker); /* * SMB2 Worker functions - most of protocol specific implementation details diff --git a/fs/cifs/smb2transport.c b/fs/cifs/smb2transport.c index 349d5ccf854c..51b9437c3c7b 100644 --- a/fs/cifs/smb2transport.c +++ b/fs/cifs/smb2transport.c @@ -171,9 +171,7 @@ smb2_calc_signature(struct smb_rqst *rqst, struct TCP_Server_Info *server) unsigned char smb2_signature[SMB2_HMACSHA256_SIZE]; unsigned char *sigptr = smb2_signature; struct kvec *iov = rqst->rq_iov; - int iov_hdr_index = rqst->rq_nvec > 1 ? 1 : 0; - struct smb2_sync_hdr *shdr = - (struct smb2_sync_hdr *)iov[iov_hdr_index].iov_base; + struct smb2_sync_hdr *shdr = (struct smb2_sync_hdr *)iov[0].iov_base; struct cifs_ses *ses; ses = smb2_find_smb_ses(server, shdr->SessionId); @@ -204,7 +202,7 @@ smb2_calc_signature(struct smb_rqst *rqst, struct TCP_Server_Info *server) return rc; } - rc = __cifs_calc_signature(rqst, iov_hdr_index, server, sigptr, + rc = __cifs_calc_signature(rqst, server, sigptr, &server->secmech.sdeschmacsha256->shash); if (!rc) @@ -414,9 +412,7 @@ smb3_calc_signature(struct smb_rqst *rqst, struct TCP_Server_Info *server) unsigned char smb3_signature[SMB2_CMACAES_SIZE]; unsigned char *sigptr = smb3_signature; struct kvec *iov = rqst->rq_iov; - int iov_hdr_index = rqst->rq_nvec > 1 ? 1 : 0; - struct smb2_sync_hdr *shdr = - (struct smb2_sync_hdr *)iov[iov_hdr_index].iov_base; + struct smb2_sync_hdr *shdr = (struct smb2_sync_hdr *)iov[0].iov_base; struct cifs_ses *ses; ses = smb2_find_smb_ses(server, shdr->SessionId); @@ -447,7 +443,7 @@ smb3_calc_signature(struct smb_rqst *rqst, struct TCP_Server_Info *server) return rc; } - rc = __cifs_calc_signature(rqst, iov_hdr_index, server, sigptr, + rc = __cifs_calc_signature(rqst, server, sigptr, &server->secmech.sdesccmacaes->shash); if (!rc) @@ -462,7 +458,7 @@ smb2_sign_rqst(struct smb_rqst *rqst, struct TCP_Server_Info *server) { int rc = 0; struct smb2_sync_hdr *shdr = - (struct smb2_sync_hdr *)rqst->rq_iov[1].iov_base; + (struct smb2_sync_hdr *)rqst->rq_iov[0].iov_base; if (!(shdr->Flags & SMB2_FLAGS_SIGNED) || server->tcpStatus == CifsNeedNegotiate) @@ -635,7 +631,7 @@ smb2_setup_request(struct cifs_ses *ses, struct smb_rqst *rqst) { int rc; struct smb2_sync_hdr *shdr = - (struct smb2_sync_hdr *)rqst->rq_iov[1].iov_base; + (struct smb2_sync_hdr *)rqst->rq_iov[0].iov_base; struct mid_q_entry *mid; smb2_seq_num_into_buf(ses->server, shdr); @@ -656,7 +652,7 @@ smb2_setup_async_request(struct TCP_Server_Info *server, struct smb_rqst *rqst) { int rc; struct smb2_sync_hdr *shdr = - (struct smb2_sync_hdr *)rqst->rq_iov[1].iov_base; + (struct smb2_sync_hdr *)rqst->rq_iov[0].iov_base; struct mid_q_entry *mid; smb2_seq_num_into_buf(server, shdr); diff --git a/fs/cifs/smbdirect.c b/fs/cifs/smbdirect.c index e459c97151b3..6fd94d9ffac2 100644 --- a/fs/cifs/smbdirect.c +++ b/fs/cifs/smbdirect.c @@ -18,6 +18,7 @@ #include "smbdirect.h" #include "cifs_debug.h" #include "cifsproto.h" +#include "smb2proto.h" static struct smbd_response *get_empty_queue_buffer( struct smbd_connection *info); @@ -2087,7 +2088,7 @@ int smbd_send(struct smbd_connection *info, struct smb_rqst *rqst) struct kvec vec; int nvecs; int size; - unsigned int buflen = 0, remaining_data_length; + unsigned int buflen, remaining_data_length; int start, i, j; int max_iov_size = info->max_send_size - sizeof(struct smbd_data_transfer); @@ -2111,25 +2112,13 @@ int smbd_send(struct smbd_connection *info, struct smb_rqst *rqst) log_write(ERR, "expected the pdu length in 1st iov, but got %zu\n", rqst->rq_iov[0].iov_len); return -EINVAL; } - iov = &rqst->rq_iov[1]; - - /* total up iov array first */ - for (i = 0; i < rqst->rq_nvec-1; i++) { - buflen += iov[i].iov_len; - } /* * Add in the page array if there is one. The caller needs to set * rq_tailsz to PAGE_SIZE when the buffer has multiple pages and * ends at page boundary */ - if (rqst->rq_npages) { - if (rqst->rq_npages == 1) - buflen += rqst->rq_tailsz; - else - buflen += rqst->rq_pagesz * (rqst->rq_npages - 1) - - rqst->rq_offset + rqst->rq_tailsz; - } + buflen = smb2_rqst_len(rqst, true); if (buflen + sizeof(struct smbd_data_transfer) > info->max_fragmented_send_size) { @@ -2139,6 +2128,8 @@ int smbd_send(struct smbd_connection *info, struct smb_rqst *rqst) goto done; } + iov = &rqst->rq_iov[1]; + cifs_dbg(FYI, "Sending smb (RDMA): smb_len=%u\n", buflen); for (i = 0; i < rqst->rq_nvec-1; i++) dump_smb(iov[i].iov_base, iov[i].iov_len); diff --git a/fs/cifs/trace.h b/fs/cifs/trace.h index 61e74d455d90..67e413f6ee4d 100644 --- a/fs/cifs/trace.h +++ b/fs/cifs/trace.h @@ -378,7 +378,7 @@ DEFINE_EVENT(smb3_open_err_class, smb3_##name, \ TP_ARGS(xid, tid, sesid, create_options, desired_access, rc)) DEFINE_SMB3_OPEN_ERR_EVENT(open_err); - +DEFINE_SMB3_OPEN_ERR_EVENT(posix_mkdir_err); DECLARE_EVENT_CLASS(smb3_open_done_class, TP_PROTO(unsigned int xid, @@ -420,6 +420,7 @@ DEFINE_EVENT(smb3_open_done_class, smb3_##name, \ TP_ARGS(xid, fid, tid, sesid, create_options, desired_access)) DEFINE_SMB3_OPEN_DONE_EVENT(open_done); +DEFINE_SMB3_OPEN_DONE_EVENT(posix_mkdir_done); #endif /* _CIFS_TRACE_H */ diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index 1f1a68f89110..fb57dfbfb749 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -201,15 +201,24 @@ smb_send_kvec(struct TCP_Server_Info *server, struct msghdr *smb_msg, return 0; } -static unsigned long -rqst_len(struct smb_rqst *rqst) +unsigned long +smb2_rqst_len(struct smb_rqst *rqst, bool skip_rfc1002_marker) { unsigned int i; - struct kvec *iov = rqst->rq_iov; + struct kvec *iov; + int nvec; unsigned long buflen = 0; + if (skip_rfc1002_marker && rqst->rq_iov[0].iov_len == 4) { + iov = &rqst->rq_iov[1]; + nvec = rqst->rq_nvec - 1; + } else { + iov = rqst->rq_iov; + nvec = rqst->rq_nvec; + } + /* total up iov array first */ - for (i = 0; i < rqst->rq_nvec; i++) + for (i = 0; i < nvec; i++) buflen += iov[i].iov_len; /* @@ -236,18 +245,20 @@ rqst_len(struct smb_rqst *rqst) } static int -__smb_send_rqst(struct TCP_Server_Info *server, struct smb_rqst *rqst) +__smb_send_rqst(struct TCP_Server_Info *server, int num_rqst, + struct smb_rqst *rqst) { - int rc; - struct kvec *iov = rqst->rq_iov; - int n_vec = rqst->rq_nvec; - unsigned int smb_buf_length = get_rfc1002_length(iov[0].iov_base); - unsigned long send_length; - unsigned int i; + int rc = 0; + struct kvec *iov; + int n_vec; + unsigned int send_length = 0; + unsigned int i, j; size_t total_len = 0, sent, size; struct socket *ssocket = server->ssocket; struct msghdr smb_msg; int val = 1; + __be32 rfc1002_marker; + if (cifs_rdma_enabled(server) && server->smbd_conn) { rc = smbd_send(server->smbd_conn, rqst); goto smbd_done; @@ -255,51 +266,67 @@ __smb_send_rqst(struct TCP_Server_Info *server, struct smb_rqst *rqst) if (ssocket == NULL) return -ENOTSOCK; - /* sanity check send length */ - send_length = rqst_len(rqst); - if (send_length != smb_buf_length + 4) { - WARN(1, "Send length mismatch(send_length=%lu smb_buf_length=%u)\n", - send_length, smb_buf_length); - return -EIO; - } - - if (n_vec < 2) - return -EIO; - - cifs_dbg(FYI, "Sending smb: smb_len=%u\n", smb_buf_length); - dump_smb(iov[0].iov_base, iov[0].iov_len); - dump_smb(iov[1].iov_base, iov[1].iov_len); - /* cork the socket */ kernel_setsockopt(ssocket, SOL_TCP, TCP_CORK, (char *)&val, sizeof(val)); - size = 0; - for (i = 0; i < n_vec; i++) - size += iov[i].iov_len; + for (j = 0; j < num_rqst; j++) + send_length += smb2_rqst_len(&rqst[j], true); + rfc1002_marker = cpu_to_be32(send_length); - iov_iter_kvec(&smb_msg.msg_iter, WRITE | ITER_KVEC, iov, n_vec, size); + /* Generate a rfc1002 marker for SMB2+ */ + if (server->vals->header_preamble_size == 0) { + struct kvec hiov = { + .iov_base = &rfc1002_marker, + .iov_len = 4 + }; + iov_iter_kvec(&smb_msg.msg_iter, WRITE | ITER_KVEC, &hiov, + 1, 4); + rc = smb_send_kvec(server, &smb_msg, &sent); + if (rc < 0) + goto uncork; - rc = smb_send_kvec(server, &smb_msg, &sent); - if (rc < 0) - goto uncork; + total_len += sent; + send_length += 4; + } - total_len += sent; + cifs_dbg(FYI, "Sending smb: smb_len=%u\n", send_length); - /* now walk the page array and send each page in it */ - for (i = 0; i < rqst->rq_npages; i++) { - struct bio_vec bvec; + for (j = 0; j < num_rqst; j++) { + iov = rqst[j].rq_iov; + n_vec = rqst[j].rq_nvec; - bvec.bv_page = rqst->rq_pages[i]; - rqst_page_get_length(rqst, i, &bvec.bv_len, &bvec.bv_offset); + size = 0; + for (i = 0; i < n_vec; i++) { + dump_smb(iov[i].iov_base, iov[i].iov_len); + size += iov[i].iov_len; + } + + iov_iter_kvec(&smb_msg.msg_iter, WRITE | ITER_KVEC, + iov, n_vec, size); - iov_iter_bvec(&smb_msg.msg_iter, WRITE | ITER_BVEC, - &bvec, 1, bvec.bv_len); rc = smb_send_kvec(server, &smb_msg, &sent); if (rc < 0) - break; + goto uncork; total_len += sent; + + /* now walk the page array and send each page in it */ + for (i = 0; i < rqst[j].rq_npages; i++) { + struct bio_vec bvec; + + bvec.bv_page = rqst[j].rq_pages[i]; + rqst_page_get_length(&rqst[j], i, &bvec.bv_len, + &bvec.bv_offset); + + iov_iter_bvec(&smb_msg.msg_iter, WRITE | ITER_BVEC, + &bvec, 1, bvec.bv_len); + rc = smb_send_kvec(server, &smb_msg, &sent); + if (rc < 0) + break; + + total_len += sent; + } } uncork: @@ -308,9 +335,9 @@ uncork: kernel_setsockopt(ssocket, SOL_TCP, TCP_CORK, (char *)&val, sizeof(val)); - if ((total_len > 0) && (total_len != smb_buf_length + 4)) { + if ((total_len > 0) && (total_len != send_length)) { cifs_dbg(FYI, "partial send (wanted=%u sent=%zu): terminating session\n", - smb_buf_length + 4, total_len); + send_length, total_len); /* * If we have only sent part of an SMB then the next SMB could * be taken as the remainder of this one. We need to kill the @@ -335,7 +362,7 @@ smb_send_rqst(struct TCP_Server_Info *server, struct smb_rqst *rqst, int flags) int rc; if (!(flags & CIFS_TRANSFORM_REQ)) - return __smb_send_rqst(server, rqst); + return __smb_send_rqst(server, 1, rqst); if (!server->ops->init_transform_rq || !server->ops->free_transform_rq) { @@ -347,7 +374,7 @@ smb_send_rqst(struct TCP_Server_Info *server, struct smb_rqst *rqst, int flags) if (rc) return rc; - rc = __smb_send_rqst(server, &cur_rqst); + rc = __smb_send_rqst(server, 1, &cur_rqst); server->ops->free_transform_rq(&cur_rqst); return rc; } @@ -365,7 +392,7 @@ smb_send(struct TCP_Server_Info *server, struct smb_hdr *smb_buffer, iov[1].iov_base = (char *)smb_buffer + 4; iov[1].iov_len = smb_buf_length; - return __smb_send_rqst(server, &rqst); + return __smb_send_rqst(server, 1, &rqst); } static int @@ -730,7 +757,6 @@ cifs_send_recv(const unsigned int xid, struct cifs_ses *ses, * to the same server. We may make this configurable later or * use ses->maxReq. */ - rc = wait_for_free_request(ses->server, timeout, optype); if (rc) return rc; @@ -766,8 +792,8 @@ cifs_send_recv(const unsigned int xid, struct cifs_ses *ses, #ifdef CONFIG_CIFS_SMB311 if ((ses->status == CifsNew) || (optype & CIFS_NEG_OP)) - smb311_update_preauth_hash(ses, rqst->rq_iov+1, - rqst->rq_nvec-1); + smb311_update_preauth_hash(ses, rqst->rq_iov, + rqst->rq_nvec); #endif if (timeout == CIFS_ASYNC_OP) @@ -812,8 +838,8 @@ cifs_send_recv(const unsigned int xid, struct cifs_ses *ses, #ifdef CONFIG_CIFS_SMB311 if ((ses->status == CifsNew) || (optype & CIFS_NEG_OP)) { struct kvec iov = { - .iov_base = buf, - .iov_len = midQ->resp_buf_size + .iov_base = resp_iov->iov_base, + .iov_len = resp_iov->iov_len }; smb311_update_preauth_hash(ses, &iov, 1); } @@ -872,49 +898,6 @@ SendReceive2(const unsigned int xid, struct cifs_ses *ses, return rc; } -/* Like SendReceive2 but iov[0] does not contain an rfc1002 header */ -int -smb2_send_recv(const unsigned int xid, struct cifs_ses *ses, - struct kvec *iov, int n_vec, int *resp_buf_type /* ret */, - const int flags, struct kvec *resp_iov) -{ - struct smb_rqst rqst; - struct kvec s_iov[CIFS_MAX_IOV_SIZE], *new_iov; - int rc; - int i; - __u32 count; - __be32 rfc1002_marker; - - if (n_vec + 1 > CIFS_MAX_IOV_SIZE) { - new_iov = kmalloc_array(n_vec + 1, sizeof(struct kvec), - GFP_KERNEL); - if (!new_iov) - return -ENOMEM; - } else - new_iov = s_iov; - - /* 1st iov is an RFC1002 Session Message length */ - memcpy(new_iov + 1, iov, (sizeof(struct kvec) * n_vec)); - - count = 0; - for (i = 1; i < n_vec + 1; i++) - count += new_iov[i].iov_len; - - rfc1002_marker = cpu_to_be32(count); - - new_iov[0].iov_base = &rfc1002_marker; - new_iov[0].iov_len = 4; - - memset(&rqst, 0, sizeof(struct smb_rqst)); - rqst.rq_iov = new_iov; - rqst.rq_nvec = n_vec + 1; - - rc = cifs_send_recv(xid, ses, &rqst, resp_buf_type, flags, resp_iov); - if (n_vec + 1 > CIFS_MAX_IOV_SIZE) - kfree(new_iov); - return rc; -} - int SendReceive(const unsigned int xid, struct cifs_ses *ses, struct smb_hdr *in_buf, struct smb_hdr *out_buf, diff --git a/fs/eventfd.c b/fs/eventfd.c index ceb1031f1cac..08d3bd602f73 100644 --- a/fs/eventfd.c +++ b/fs/eventfd.c @@ -101,20 +101,14 @@ static int eventfd_release(struct inode *inode, struct file *file) return 0; } -static struct wait_queue_head * -eventfd_get_poll_head(struct file *file, __poll_t events) -{ - struct eventfd_ctx *ctx = file->private_data; - - return &ctx->wqh; -} - -static __poll_t eventfd_poll_mask(struct file *file, __poll_t eventmask) +static __poll_t eventfd_poll(struct file *file, poll_table *wait) { struct eventfd_ctx *ctx = file->private_data; __poll_t events = 0; u64 count; + poll_wait(file, &ctx->wqh, wait); + /* * All writes to ctx->count occur within ctx->wqh.lock. This read * can be done outside ctx->wqh.lock because we know that poll_wait @@ -156,11 +150,11 @@ static __poll_t eventfd_poll_mask(struct file *file, __poll_t eventmask) count = READ_ONCE(ctx->count); if (count > 0) - events |= (EPOLLIN & eventmask); + events |= EPOLLIN; if (count == ULLONG_MAX) events |= EPOLLERR; if (ULLONG_MAX - 1 > count) - events |= (EPOLLOUT & eventmask); + events |= EPOLLOUT; return events; } @@ -311,8 +305,7 @@ static const struct file_operations eventfd_fops = { .show_fdinfo = eventfd_show_fdinfo, #endif .release = eventfd_release, - .get_poll_head = eventfd_get_poll_head, - .poll_mask = eventfd_poll_mask, + .poll = eventfd_poll, .read = eventfd_read, .write = eventfd_write, .llseek = noop_llseek, diff --git a/fs/eventpoll.c b/fs/eventpoll.c index ea4436f409fb..67db22fe99c5 100644 --- a/fs/eventpoll.c +++ b/fs/eventpoll.c @@ -922,18 +922,14 @@ static __poll_t ep_read_events_proc(struct eventpoll *ep, struct list_head *head return 0; } -static struct wait_queue_head *ep_eventpoll_get_poll_head(struct file *file, - __poll_t eventmask) -{ - struct eventpoll *ep = file->private_data; - return &ep->poll_wait; -} - -static __poll_t ep_eventpoll_poll_mask(struct file *file, __poll_t eventmask) +static __poll_t ep_eventpoll_poll(struct file *file, poll_table *wait) { struct eventpoll *ep = file->private_data; int depth = 0; + /* Insert inside our poll wait queue */ + poll_wait(file, &ep->poll_wait, wait); + /* * Proceed to find out if wanted events are really available inside * the ready list. @@ -972,8 +968,7 @@ static const struct file_operations eventpoll_fops = { .show_fdinfo = ep_show_fdinfo, #endif .release = ep_eventpoll_release, - .get_poll_head = ep_eventpoll_get_poll_head, - .poll_mask = ep_eventpoll_poll_mask, + .poll = ep_eventpoll_poll, .llseek = noop_llseek, }; diff --git a/fs/ext2/ext2.h b/fs/ext2/ext2.h index cc40802ddfa8..00e759f05161 100644 --- a/fs/ext2/ext2.h +++ b/fs/ext2/ext2.h @@ -748,7 +748,6 @@ extern void ext2_free_blocks (struct inode *, unsigned long, unsigned long); extern unsigned long ext2_count_free_blocks (struct super_block *); extern unsigned long ext2_count_dirs (struct super_block *); -extern void ext2_check_blocks_bitmap (struct super_block *); extern struct ext2_group_desc * ext2_get_group_desc(struct super_block * sb, unsigned int block_group, struct buffer_head ** bh); @@ -771,7 +770,6 @@ extern void ext2_set_link(struct inode *, struct ext2_dir_entry_2 *, struct page extern struct inode * ext2_new_inode (struct inode *, umode_t, const struct qstr *); extern void ext2_free_inode (struct inode *); extern unsigned long ext2_count_free_inodes (struct super_block *); -extern void ext2_check_inodes_bitmap (struct super_block *); extern unsigned long ext2_count_free (struct buffer_head *, unsigned); /* inode.c */ diff --git a/fs/ext2/super.c b/fs/ext2/super.c index 25ab1274090f..8ff53f8da3bc 100644 --- a/fs/ext2/super.c +++ b/fs/ext2/super.c @@ -557,6 +557,9 @@ static int parse_options(char *options, struct super_block *sb, set_opt (opts->s_mount_opt, NO_UID32); break; case Opt_nocheck: + ext2_msg(sb, KERN_WARNING, + "Option nocheck/check=none is deprecated and" + " will be removed in June 2020."); clear_opt (opts->s_mount_opt, CHECK); break; case Opt_debug: @@ -1335,9 +1338,6 @@ static int ext2_remount (struct super_block * sb, int * flags, char * data) new_opts.s_resgid = sbi->s_resgid; spin_unlock(&sbi->s_lock); - /* - * Allow the "check" option to be passed as a remount option. - */ if (!parse_options(data, sb, &new_opts)) return -EINVAL; diff --git a/fs/jfs/xattr.c b/fs/jfs/xattr.c index c60f3d32ee91..a6797986b625 100644 --- a/fs/jfs/xattr.c +++ b/fs/jfs/xattr.c @@ -491,15 +491,17 @@ static int ea_get(struct inode *inode, struct ea_buffer *ea_buf, int min_size) if (size > PSIZE) { /* * To keep the rest of the code simple. Allocate a - * contiguous buffer to work with + * contiguous buffer to work with. Make the buffer large + * enough to make use of the whole extent. */ - ea_buf->xattr = kmalloc(size, GFP_KERNEL); + ea_buf->max_size = (size + sb->s_blocksize - 1) & + ~(sb->s_blocksize - 1); + + ea_buf->xattr = kmalloc(ea_buf->max_size, GFP_KERNEL); if (ea_buf->xattr == NULL) return -ENOMEM; ea_buf->flag = EA_MALLOC; - ea_buf->max_size = (size + sb->s_blocksize - 1) & - ~(sb->s_blocksize - 1); if (ea_size == 0) return 0; diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c index bbd0465535eb..f033f3a69a3b 100644 --- a/fs/nfs/delegation.c +++ b/fs/nfs/delegation.c @@ -883,8 +883,10 @@ struct inode *nfs_delegation_find_inode(struct nfs_client *clp, rcu_read_lock(); list_for_each_entry_rcu(server, &clp->cl_superblocks, client_link) { res = nfs_delegation_find_inode_server(server, fhandle); - if (res != ERR_PTR(-ENOENT)) + if (res != ERR_PTR(-ENOENT)) { + rcu_read_unlock(); return res; + } } rcu_read_unlock(); return ERR_PTR(-ENOENT); diff --git a/fs/nfs/flexfilelayout/flexfilelayout.c b/fs/nfs/flexfilelayout/flexfilelayout.c index d4a07acad598..8f003792ccde 100644 --- a/fs/nfs/flexfilelayout/flexfilelayout.c +++ b/fs/nfs/flexfilelayout/flexfilelayout.c @@ -1243,17 +1243,18 @@ static int ff_layout_read_done_cb(struct rpc_task *task, hdr->ds_clp, hdr->lseg, hdr->pgio_mirror_idx); + clear_bit(NFS_IOHDR_RESEND_PNFS, &hdr->flags); + clear_bit(NFS_IOHDR_RESEND_MDS, &hdr->flags); switch (err) { case -NFS4ERR_RESET_TO_PNFS: if (ff_layout_choose_best_ds_for_read(hdr->lseg, hdr->pgio_mirror_idx + 1, &hdr->pgio_mirror_idx)) goto out_eagain; - ff_layout_read_record_layoutstats_done(task, hdr); - pnfs_read_resend_pnfs(hdr); + set_bit(NFS_IOHDR_RESEND_PNFS, &hdr->flags); return task->tk_status; case -NFS4ERR_RESET_TO_MDS: - ff_layout_reset_read(hdr); + set_bit(NFS_IOHDR_RESEND_MDS, &hdr->flags); return task->tk_status; case -EAGAIN: goto out_eagain; @@ -1403,6 +1404,10 @@ static void ff_layout_read_release(void *data) struct nfs_pgio_header *hdr = data; ff_layout_read_record_layoutstats_done(&hdr->task, hdr); + if (test_bit(NFS_IOHDR_RESEND_PNFS, &hdr->flags)) + pnfs_read_resend_pnfs(hdr); + else if (test_bit(NFS_IOHDR_RESEND_MDS, &hdr->flags)) + ff_layout_reset_read(hdr); pnfs_generic_rw_release(data); } @@ -1423,12 +1428,14 @@ static int ff_layout_write_done_cb(struct rpc_task *task, hdr->ds_clp, hdr->lseg, hdr->pgio_mirror_idx); + clear_bit(NFS_IOHDR_RESEND_PNFS, &hdr->flags); + clear_bit(NFS_IOHDR_RESEND_MDS, &hdr->flags); switch (err) { case -NFS4ERR_RESET_TO_PNFS: - ff_layout_reset_write(hdr, true); + set_bit(NFS_IOHDR_RESEND_PNFS, &hdr->flags); return task->tk_status; case -NFS4ERR_RESET_TO_MDS: - ff_layout_reset_write(hdr, false); + set_bit(NFS_IOHDR_RESEND_MDS, &hdr->flags); return task->tk_status; case -EAGAIN: return -EAGAIN; @@ -1575,6 +1582,10 @@ static void ff_layout_write_release(void *data) struct nfs_pgio_header *hdr = data; ff_layout_write_record_layoutstats_done(&hdr->task, hdr); + if (test_bit(NFS_IOHDR_RESEND_PNFS, &hdr->flags)) + ff_layout_reset_write(hdr, true); + else if (test_bit(NFS_IOHDR_RESEND_MDS, &hdr->flags)) + ff_layout_reset_write(hdr, false); pnfs_generic_rw_release(data); } diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index ed45090e4df6..6dd146885da9 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -3294,6 +3294,7 @@ static void nfs4_close_prepare(struct rpc_task *task, void *data) struct nfs4_closedata *calldata = data; struct nfs4_state *state = calldata->state; struct inode *inode = calldata->inode; + struct pnfs_layout_hdr *lo; bool is_rdonly, is_wronly, is_rdwr; int call_close = 0; @@ -3337,6 +3338,12 @@ static void nfs4_close_prepare(struct rpc_task *task, void *data) goto out_wait; } + lo = calldata->arg.lr_args ? calldata->arg.lr_args->layout : NULL; + if (lo && !pnfs_layout_is_valid(lo)) { + calldata->arg.lr_args = NULL; + calldata->res.lr_res = NULL; + } + if (calldata->arg.fmode == 0) task->tk_msg.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_CLOSE]; @@ -5972,12 +5979,19 @@ static void nfs4_delegreturn_release(void *calldata) static void nfs4_delegreturn_prepare(struct rpc_task *task, void *data) { struct nfs4_delegreturndata *d_data; + struct pnfs_layout_hdr *lo; d_data = (struct nfs4_delegreturndata *)data; if (!d_data->lr.roc && nfs4_wait_on_layoutreturn(d_data->inode, task)) return; + lo = d_data->args.lr_args ? d_data->args.lr_args->layout : NULL; + if (lo && !pnfs_layout_is_valid(lo)) { + d_data->args.lr_args = NULL; + d_data->res.lr_res = NULL; + } + nfs4_setup_sequence(d_data->res.server->nfs_client, &d_data->args.seq_args, &d_data->res.seq_res, @@ -8650,6 +8664,8 @@ nfs4_layoutget_handle_exception(struct rpc_task *task, dprintk("--> %s tk_status => %d\n", __func__, -task->tk_status); + nfs4_sequence_free_slot(&lgp->res.seq_res); + switch (nfs4err) { case 0: goto out; @@ -8714,7 +8730,6 @@ nfs4_layoutget_handle_exception(struct rpc_task *task, goto out; } - nfs4_sequence_free_slot(&lgp->res.seq_res); err = nfs4_handle_exception(server, nfs4err, exception); if (!status) { if (exception->retry) @@ -8786,20 +8801,22 @@ nfs4_proc_layoutget(struct nfs4_layoutget *lgp, long *timeout) if (IS_ERR(task)) return ERR_CAST(task); status = rpc_wait_for_completion_task(task); - if (status == 0) { + if (status != 0) + goto out; + + /* if layoutp->len is 0, nfs4_layoutget_prepare called rpc_exit */ + if (task->tk_status < 0 || lgp->res.layoutp->len == 0) { status = nfs4_layoutget_handle_exception(task, lgp, &exception); *timeout = exception.timeout; - } - + } else + lseg = pnfs_layout_process(lgp); +out: trace_nfs4_layoutget(lgp->args.ctx, &lgp->args.range, &lgp->res.range, &lgp->res.stateid, status); - /* if layoutp->len is 0, nfs4_layoutget_prepare called rpc_exit */ - if (status == 0 && lgp->res.layoutp->len) - lseg = pnfs_layout_process(lgp); rpc_put_task(task); dprintk("<-- %s status=%d\n", __func__, status); if (status) @@ -8817,6 +8834,8 @@ nfs4_layoutreturn_prepare(struct rpc_task *task, void *calldata) &lrp->args.seq_args, &lrp->res.seq_res, task); + if (!pnfs_layout_is_valid(lrp->args.layout)) + rpc_exit(task, 0); } static void nfs4_layoutreturn_done(struct rpc_task *task, void *calldata) diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h index a8f5e6b16749..3fe81424337d 100644 --- a/fs/nfs/pnfs.h +++ b/fs/nfs/pnfs.h @@ -801,6 +801,11 @@ static inline void nfs4_lgopen_release(struct nfs4_layoutget *lgp) { } +static inline bool pnfs_layout_is_valid(const struct pnfs_layout_hdr *lo) +{ + return false; +} + #endif /* CONFIG_NFS_V4_1 */ #if IS_ENABLED(CONFIG_NFS_V4_2) diff --git a/fs/pipe.c b/fs/pipe.c index bb0840e234f3..39d6f431da83 100644 --- a/fs/pipe.c +++ b/fs/pipe.c @@ -509,22 +509,19 @@ static long pipe_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) } } -static struct wait_queue_head * -pipe_get_poll_head(struct file *filp, __poll_t events) -{ - struct pipe_inode_info *pipe = filp->private_data; - - return &pipe->wait; -} - /* No kernel lock held - fine */ -static __poll_t pipe_poll_mask(struct file *filp, __poll_t events) +static __poll_t +pipe_poll(struct file *filp, poll_table *wait) { + __poll_t mask; struct pipe_inode_info *pipe = filp->private_data; - int nrbufs = pipe->nrbufs; - __poll_t mask = 0; + int nrbufs; + + poll_wait(filp, &pipe->wait, wait); /* Reading only -- no need for acquiring the semaphore. */ + nrbufs = pipe->nrbufs; + mask = 0; if (filp->f_mode & FMODE_READ) { mask = (nrbufs > 0) ? EPOLLIN | EPOLLRDNORM : 0; if (!pipe->writers && filp->f_version != pipe->w_counter) @@ -1023,8 +1020,7 @@ const struct file_operations pipefifo_fops = { .llseek = no_llseek, .read_iter = pipe_read, .write_iter = pipe_write, - .get_poll_head = pipe_get_poll_head, - .poll_mask = pipe_poll_mask, + .poll = pipe_poll, .unlocked_ioctl = pipe_ioctl, .release = pipe_release, .fasync = pipe_fasync, diff --git a/fs/proc/base.c b/fs/proc/base.c index b6572944efc3..aaffc0c30216 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -235,6 +235,10 @@ static ssize_t get_mm_cmdline(struct mm_struct *mm, char __user *buf, if (env_start != arg_end || env_start >= env_end) env_start = env_end = arg_end; + /* .. and limit it to a maximum of one page of slop */ + if (env_end >= arg_end + PAGE_SIZE) + env_end = arg_end + PAGE_SIZE - 1; + /* We're not going to care if "*ppos" has high bits set */ pos = arg_start + *ppos; @@ -254,10 +258,19 @@ static ssize_t get_mm_cmdline(struct mm_struct *mm, char __user *buf, while (count) { int got; size_t size = min_t(size_t, PAGE_SIZE, count); + long offset; - got = access_remote_vm(mm, pos, page, size, FOLL_ANON); - if (got <= 0) + /* + * Are we already starting past the official end? + * We always include the last byte that is *supposed* + * to be NUL + */ + offset = (pos >= arg_end) ? pos - arg_end + 1 : 0; + + got = access_remote_vm(mm, pos - offset, page, size + offset, FOLL_ANON); + if (got <= offset) break; + got -= offset; /* Don't walk past a NUL character once you hit arg_end */ if (pos + got >= arg_end) { @@ -276,12 +289,17 @@ static ssize_t get_mm_cmdline(struct mm_struct *mm, char __user *buf, n = arg_end - pos - 1; /* Cut off at first NUL after 'n' */ - got = n + strnlen(page+n, got-n); - if (!got) + got = n + strnlen(page+n, offset+got-n); + if (got < offset) break; + got -= offset; + + /* Include the NUL if it existed */ + if (got < size) + got++; } - got -= copy_to_user(buf, page, got); + got -= copy_to_user(buf, page+offset, got); if (unlikely(!got)) { if (!len) len = -EFAULT; diff --git a/fs/proc/generic.c b/fs/proc/generic.c index 6ac1c92997ea..bb1c1625b158 100644 --- a/fs/proc/generic.c +++ b/fs/proc/generic.c @@ -564,11 +564,20 @@ static int proc_seq_open(struct inode *inode, struct file *file) return seq_open(file, de->seq_ops); } +static int proc_seq_release(struct inode *inode, struct file *file) +{ + struct proc_dir_entry *de = PDE(inode); + + if (de->state_size) + return seq_release_private(inode, file); + return seq_release(inode, file); +} + static const struct file_operations proc_seq_fops = { .open = proc_seq_open, .read = seq_read, .llseek = seq_lseek, - .release = seq_release, + .release = proc_seq_release, }; struct proc_dir_entry *proc_create_seq_private(const char *name, umode_t mode, diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c index d88231e3b2be..fc20e06c56ba 100644 --- a/fs/quota/dquot.c +++ b/fs/quota/dquot.c @@ -711,21 +711,18 @@ EXPORT_SYMBOL(dquot_quota_sync); static unsigned long dqcache_shrink_scan(struct shrinker *shrink, struct shrink_control *sc) { - struct list_head *head; struct dquot *dquot; unsigned long freed = 0; spin_lock(&dq_list_lock); - head = free_dquots.prev; - while (head != &free_dquots && sc->nr_to_scan) { - dquot = list_entry(head, struct dquot, dq_free); + while (!list_empty(&free_dquots) && sc->nr_to_scan) { + dquot = list_first_entry(&free_dquots, struct dquot, dq_free); remove_dquot_hash(dquot); remove_free_dquot(dquot); remove_inuse(dquot); do_destroy_dquot(dquot); sc->nr_to_scan--; freed++; - head = free_dquots.prev; } spin_unlock(&dq_list_lock); return freed; diff --git a/fs/select.c b/fs/select.c index 317891ff8165..4a6b6e4b21cb 100644 --- a/fs/select.c +++ b/fs/select.c @@ -34,29 +34,6 @@ #include <linux/uaccess.h> -__poll_t vfs_poll(struct file *file, struct poll_table_struct *pt) -{ - if (file->f_op->poll) { - return file->f_op->poll(file, pt); - } else if (file_has_poll_mask(file)) { - unsigned int events = poll_requested_events(pt); - struct wait_queue_head *head; - - if (pt && pt->_qproc) { - head = file->f_op->get_poll_head(file, events); - if (!head) - return DEFAULT_POLLMASK; - if (IS_ERR(head)) - return EPOLLERR; - pt->_qproc(file, head, pt); - } - - return file->f_op->poll_mask(file, events); - } else { - return DEFAULT_POLLMASK; - } -} -EXPORT_SYMBOL_GPL(vfs_poll); /* * Estimate expected accuracy in ns from a timeval. diff --git a/fs/timerfd.c b/fs/timerfd.c index d84a2bee4f82..cdad49da3ff7 100644 --- a/fs/timerfd.c +++ b/fs/timerfd.c @@ -226,20 +226,21 @@ static int timerfd_release(struct inode *inode, struct file *file) kfree_rcu(ctx, rcu); return 0; } - -static struct wait_queue_head *timerfd_get_poll_head(struct file *file, - __poll_t eventmask) + +static __poll_t timerfd_poll(struct file *file, poll_table *wait) { struct timerfd_ctx *ctx = file->private_data; + __poll_t events = 0; + unsigned long flags; - return &ctx->wqh; -} + poll_wait(file, &ctx->wqh, wait); -static __poll_t timerfd_poll_mask(struct file *file, __poll_t eventmask) -{ - struct timerfd_ctx *ctx = file->private_data; + spin_lock_irqsave(&ctx->wqh.lock, flags); + if (ctx->ticks) + events |= EPOLLIN; + spin_unlock_irqrestore(&ctx->wqh.lock, flags); - return ctx->ticks ? EPOLLIN : 0; + return events; } static ssize_t timerfd_read(struct file *file, char __user *buf, size_t count, @@ -363,8 +364,7 @@ static long timerfd_ioctl(struct file *file, unsigned int cmd, unsigned long arg static const struct file_operations timerfd_fops = { .release = timerfd_release, - .get_poll_head = timerfd_get_poll_head, - .poll_mask = timerfd_poll_mask, + .poll = timerfd_poll, .read = timerfd_read, .llseek = noop_llseek, .show_fdinfo = timerfd_show, diff --git a/fs/udf/balloc.c b/fs/udf/balloc.c index 1b961b1d9699..fcda0fc97b90 100644 --- a/fs/udf/balloc.c +++ b/fs/udf/balloc.c @@ -533,8 +533,7 @@ static int udf_table_prealloc_blocks(struct super_block *sb, udf_write_aext(table, &epos, &eloc, (etype << 30) | elen, 1); } else - udf_delete_aext(table, epos, eloc, - (etype << 30) | elen); + udf_delete_aext(table, epos); } else { alloc_count = 0; } @@ -630,7 +629,7 @@ static udf_pblk_t udf_table_new_block(struct super_block *sb, if (goal_elen) udf_write_aext(table, &goal_epos, &goal_eloc, goal_elen, 1); else - udf_delete_aext(table, goal_epos, goal_eloc, goal_elen); + udf_delete_aext(table, goal_epos); brelse(goal_epos.bh); udf_add_free_space(sb, partition, -1); diff --git a/fs/udf/directory.c b/fs/udf/directory.c index 0a98a2369738..d9523013096f 100644 --- a/fs/udf/directory.c +++ b/fs/udf/directory.c @@ -141,10 +141,7 @@ struct fileIdentDesc *udf_fileident_read(struct inode *dir, loff_t *nf_pos, fibh->ebh->b_data, sizeof(struct fileIdentDesc) + fibh->soffset); - fi_len = (sizeof(struct fileIdentDesc) + - cfi->lengthFileIdent + - le16_to_cpu(cfi->lengthOfImpUse) + 3) & ~3; - + fi_len = udf_dir_entry_len(cfi); *nf_pos += fi_len - (fibh->eoffset - fibh->soffset); fibh->eoffset = fibh->soffset + fi_len; } else { @@ -152,6 +149,9 @@ struct fileIdentDesc *udf_fileident_read(struct inode *dir, loff_t *nf_pos, sizeof(struct fileIdentDesc)); } } + /* Got last entry outside of dir size - fs is corrupted! */ + if (*nf_pos > dir->i_size) + return NULL; return fi; } diff --git a/fs/udf/inode.c b/fs/udf/inode.c index 7f39d17352c9..9915a58fbabd 100644 --- a/fs/udf/inode.c +++ b/fs/udf/inode.c @@ -1147,8 +1147,7 @@ static void udf_update_extents(struct inode *inode, struct kernel_long_ad *laarr if (startnum > endnum) { for (i = 0; i < (startnum - endnum); i++) - udf_delete_aext(inode, *epos, laarr[i].extLocation, - laarr[i].extLength); + udf_delete_aext(inode, *epos); } else if (startnum < endnum) { for (i = 0; i < (endnum - startnum); i++) { udf_insert_aext(inode, *epos, laarr[i].extLocation, @@ -2176,14 +2175,15 @@ static int8_t udf_insert_aext(struct inode *inode, struct extent_position epos, return (nelen >> 30); } -int8_t udf_delete_aext(struct inode *inode, struct extent_position epos, - struct kernel_lb_addr eloc, uint32_t elen) +int8_t udf_delete_aext(struct inode *inode, struct extent_position epos) { struct extent_position oepos; int adsize; int8_t etype; struct allocExtDesc *aed; struct udf_inode_info *iinfo; + struct kernel_lb_addr eloc; + uint32_t elen; if (epos.bh) { get_bh(epos.bh); diff --git a/fs/udf/namei.c b/fs/udf/namei.c index c586026508db..06f37ddd2997 100644 --- a/fs/udf/namei.c +++ b/fs/udf/namei.c @@ -351,8 +351,6 @@ static struct fileIdentDesc *udf_add_entry(struct inode *dir, loff_t f_pos; loff_t size = udf_ext0_offset(dir) + dir->i_size; int nfidlen; - uint8_t lfi; - uint16_t liu; udf_pblk_t block; struct kernel_lb_addr eloc; uint32_t elen = 0; @@ -383,7 +381,7 @@ static struct fileIdentDesc *udf_add_entry(struct inode *dir, namelen = 0; } - nfidlen = (sizeof(struct fileIdentDesc) + namelen + 3) & ~3; + nfidlen = ALIGN(sizeof(struct fileIdentDesc) + namelen, UDF_NAME_PAD); f_pos = udf_ext0_offset(dir); @@ -424,12 +422,8 @@ static struct fileIdentDesc *udf_add_entry(struct inode *dir, goto out_err; } - liu = le16_to_cpu(cfi->lengthOfImpUse); - lfi = cfi->lengthFileIdent; - if ((cfi->fileCharacteristics & FID_FILE_CHAR_DELETED) != 0) { - if (((sizeof(struct fileIdentDesc) + - liu + lfi + 3) & ~3) == nfidlen) { + if (udf_dir_entry_len(cfi) == nfidlen) { cfi->descTag.tagSerialNum = cpu_to_le16(1); cfi->fileVersionNum = cpu_to_le16(1); cfi->fileCharacteristics = 0; @@ -1201,9 +1195,7 @@ static int udf_rename(struct inode *old_dir, struct dentry *old_dentry, if (dir_fi) { dir_fi->icb.extLocation = cpu_to_lelb(UDF_I(new_dir)->i_location); - udf_update_tag((char *)dir_fi, - (sizeof(struct fileIdentDesc) + - le16_to_cpu(dir_fi->lengthOfImpUse) + 3) & ~3); + udf_update_tag((char *)dir_fi, udf_dir_entry_len(dir_fi)); if (old_iinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB) mark_inode_dirty(old_inode); else diff --git a/fs/udf/udfdecl.h b/fs/udf/udfdecl.h index bae311b59400..84c47dde4d26 100644 --- a/fs/udf/udfdecl.h +++ b/fs/udf/udfdecl.h @@ -132,6 +132,12 @@ struct inode *udf_find_metadata_inode_efe(struct super_block *sb, extern int udf_write_fi(struct inode *inode, struct fileIdentDesc *, struct fileIdentDesc *, struct udf_fileident_bh *, uint8_t *, uint8_t *); +static inline unsigned int udf_dir_entry_len(struct fileIdentDesc *cfi) +{ + return ALIGN(sizeof(struct fileIdentDesc) + + le16_to_cpu(cfi->lengthOfImpUse) + cfi->lengthFileIdent, + UDF_NAME_PAD); +} /* file.c */ extern long udf_ioctl(struct file *, unsigned int, unsigned long); @@ -167,8 +173,7 @@ extern int udf_add_aext(struct inode *, struct extent_position *, struct kernel_lb_addr *, uint32_t, int); extern void udf_write_aext(struct inode *, struct extent_position *, struct kernel_lb_addr *, uint32_t, int); -extern int8_t udf_delete_aext(struct inode *, struct extent_position, - struct kernel_lb_addr, uint32_t); +extern int8_t udf_delete_aext(struct inode *, struct extent_position); extern int8_t udf_next_aext(struct inode *, struct extent_position *, struct kernel_lb_addr *, uint32_t *, int); extern int8_t udf_current_aext(struct inode *, struct extent_position *, diff --git a/fs/xfs/libxfs/xfs_ag_resv.c b/fs/xfs/libxfs/xfs_ag_resv.c index 84db76e0e3e3..fecd187fcf2c 100644 --- a/fs/xfs/libxfs/xfs_ag_resv.c +++ b/fs/xfs/libxfs/xfs_ag_resv.c @@ -157,6 +157,7 @@ __xfs_ag_resv_free( error = xfs_mod_fdblocks(pag->pag_mount, oldresv, true); resv->ar_reserved = 0; resv->ar_asked = 0; + resv->ar_orig_reserved = 0; if (error) trace_xfs_ag_resv_free_error(pag->pag_mount, pag->pag_agno, @@ -189,13 +190,34 @@ __xfs_ag_resv_init( struct xfs_mount *mp = pag->pag_mount; struct xfs_ag_resv *resv; int error; - xfs_extlen_t reserved; + xfs_extlen_t hidden_space; if (used > ask) ask = used; - reserved = ask - used; - error = xfs_mod_fdblocks(mp, -(int64_t)reserved, true); + switch (type) { + case XFS_AG_RESV_RMAPBT: + /* + * Space taken by the rmapbt is not subtracted from fdblocks + * because the rmapbt lives in the free space. Here we must + * subtract the entire reservation from fdblocks so that we + * always have blocks available for rmapbt expansion. + */ + hidden_space = ask; + break; + case XFS_AG_RESV_METADATA: + /* + * Space taken by all other metadata btrees are accounted + * on-disk as used space. We therefore only hide the space + * that is reserved but not used by the trees. + */ + hidden_space = ask - used; + break; + default: + ASSERT(0); + return -EINVAL; + } + error = xfs_mod_fdblocks(mp, -(int64_t)hidden_space, true); if (error) { trace_xfs_ag_resv_init_error(pag->pag_mount, pag->pag_agno, error, _RET_IP_); @@ -216,7 +238,8 @@ __xfs_ag_resv_init( resv = xfs_perag_resv(pag, type); resv->ar_asked = ask; - resv->ar_reserved = resv->ar_orig_reserved = reserved; + resv->ar_orig_reserved = hidden_space; + resv->ar_reserved = ask - used; trace_xfs_ag_resv_init(pag, type, ask); return 0; diff --git a/fs/xfs/libxfs/xfs_bmap.c b/fs/xfs/libxfs/xfs_bmap.c index 01628f0c9a0c..7205268b30bc 100644 --- a/fs/xfs/libxfs/xfs_bmap.c +++ b/fs/xfs/libxfs/xfs_bmap.c @@ -5780,6 +5780,32 @@ del_cursor: return error; } +/* Make sure we won't be right-shifting an extent past the maximum bound. */ +int +xfs_bmap_can_insert_extents( + struct xfs_inode *ip, + xfs_fileoff_t off, + xfs_fileoff_t shift) +{ + struct xfs_bmbt_irec got; + int is_empty; + int error = 0; + + ASSERT(xfs_isilocked(ip, XFS_IOLOCK_EXCL)); + + if (XFS_FORCED_SHUTDOWN(ip->i_mount)) + return -EIO; + + xfs_ilock(ip, XFS_ILOCK_EXCL); + error = xfs_bmap_last_extent(NULL, ip, XFS_DATA_FORK, &got, &is_empty); + if (!error && !is_empty && got.br_startoff >= off && + ((got.br_startoff + shift) & BMBT_STARTOFF_MASK) < got.br_startoff) + error = -EINVAL; + xfs_iunlock(ip, XFS_ILOCK_EXCL); + + return error; +} + int xfs_bmap_insert_extents( struct xfs_trans *tp, diff --git a/fs/xfs/libxfs/xfs_bmap.h b/fs/xfs/libxfs/xfs_bmap.h index 99dddbd0fcc6..9b49ddf99c41 100644 --- a/fs/xfs/libxfs/xfs_bmap.h +++ b/fs/xfs/libxfs/xfs_bmap.h @@ -227,6 +227,8 @@ int xfs_bmap_collapse_extents(struct xfs_trans *tp, struct xfs_inode *ip, xfs_fileoff_t *next_fsb, xfs_fileoff_t offset_shift_fsb, bool *done, xfs_fsblock_t *firstblock, struct xfs_defer_ops *dfops); +int xfs_bmap_can_insert_extents(struct xfs_inode *ip, xfs_fileoff_t off, + xfs_fileoff_t shift); int xfs_bmap_insert_extents(struct xfs_trans *tp, struct xfs_inode *ip, xfs_fileoff_t *next_fsb, xfs_fileoff_t offset_shift_fsb, bool *done, xfs_fileoff_t stop_fsb, xfs_fsblock_t *firstblock, diff --git a/fs/xfs/libxfs/xfs_format.h b/fs/xfs/libxfs/xfs_format.h index 1c5a8aaf2bfc..059bc44c27e8 100644 --- a/fs/xfs/libxfs/xfs_format.h +++ b/fs/xfs/libxfs/xfs_format.h @@ -962,6 +962,9 @@ typedef enum xfs_dinode_fmt { XFS_DFORK_DSIZE(dip, mp) : \ XFS_DFORK_ASIZE(dip, mp)) +#define XFS_DFORK_MAXEXT(dip, mp, w) \ + (XFS_DFORK_SIZE(dip, mp, w) / sizeof(struct xfs_bmbt_rec)) + /* * Return pointers to the data or attribute forks. */ @@ -1526,6 +1529,8 @@ typedef struct xfs_bmdr_block { #define BMBT_STARTBLOCK_BITLEN 52 #define BMBT_BLOCKCOUNT_BITLEN 21 +#define BMBT_STARTOFF_MASK ((1ULL << BMBT_STARTOFF_BITLEN) - 1) + typedef struct xfs_bmbt_rec { __be64 l0, l1; } xfs_bmbt_rec_t; diff --git a/fs/xfs/libxfs/xfs_inode_buf.c b/fs/xfs/libxfs/xfs_inode_buf.c index d38d724534c4..33dc34655ac3 100644 --- a/fs/xfs/libxfs/xfs_inode_buf.c +++ b/fs/xfs/libxfs/xfs_inode_buf.c @@ -374,6 +374,47 @@ xfs_log_dinode_to_disk( } } +static xfs_failaddr_t +xfs_dinode_verify_fork( + struct xfs_dinode *dip, + struct xfs_mount *mp, + int whichfork) +{ + uint32_t di_nextents = XFS_DFORK_NEXTENTS(dip, whichfork); + + switch (XFS_DFORK_FORMAT(dip, whichfork)) { + case XFS_DINODE_FMT_LOCAL: + /* + * no local regular files yet + */ + if (whichfork == XFS_DATA_FORK) { + if (S_ISREG(be16_to_cpu(dip->di_mode))) + return __this_address; + if (be64_to_cpu(dip->di_size) > + XFS_DFORK_SIZE(dip, mp, whichfork)) + return __this_address; + } + if (di_nextents) + return __this_address; + break; + case XFS_DINODE_FMT_EXTENTS: + if (di_nextents > XFS_DFORK_MAXEXT(dip, mp, whichfork)) + return __this_address; + break; + case XFS_DINODE_FMT_BTREE: + if (whichfork == XFS_ATTR_FORK) { + if (di_nextents > MAXAEXTNUM) + return __this_address; + } else if (di_nextents > MAXEXTNUM) { + return __this_address; + } + break; + default: + return __this_address; + } + return NULL; +} + xfs_failaddr_t xfs_dinode_verify( struct xfs_mount *mp, @@ -441,24 +482,9 @@ xfs_dinode_verify( case S_IFREG: case S_IFLNK: case S_IFDIR: - switch (dip->di_format) { - case XFS_DINODE_FMT_LOCAL: - /* - * no local regular files yet - */ - if (S_ISREG(mode)) - return __this_address; - if (di_size > XFS_DFORK_DSIZE(dip, mp)) - return __this_address; - if (dip->di_nextents) - return __this_address; - /* fall through */ - case XFS_DINODE_FMT_EXTENTS: - case XFS_DINODE_FMT_BTREE: - break; - default: - return __this_address; - } + fa = xfs_dinode_verify_fork(dip, mp, XFS_DATA_FORK); + if (fa) + return fa; break; case 0: /* Uninitialized inode ok. */ @@ -468,17 +494,9 @@ xfs_dinode_verify( } if (XFS_DFORK_Q(dip)) { - switch (dip->di_aformat) { - case XFS_DINODE_FMT_LOCAL: - if (dip->di_anextents) - return __this_address; - /* fall through */ - case XFS_DINODE_FMT_EXTENTS: - case XFS_DINODE_FMT_BTREE: - break; - default: - return __this_address; - } + fa = xfs_dinode_verify_fork(dip, mp, XFS_ATTR_FORK); + if (fa) + return fa; } else { /* * If there is no fork offset, this may be a freshly-made inode diff --git a/fs/xfs/libxfs/xfs_rtbitmap.c b/fs/xfs/libxfs/xfs_rtbitmap.c index 65fc4ed2e9a1..b228c821bae6 100644 --- a/fs/xfs/libxfs/xfs_rtbitmap.c +++ b/fs/xfs/libxfs/xfs_rtbitmap.c @@ -1029,8 +1029,8 @@ xfs_rtalloc_query_range( if (low_rec->ar_startext >= mp->m_sb.sb_rextents || low_rec->ar_startext == high_rec->ar_startext) return 0; - if (high_rec->ar_startext >= mp->m_sb.sb_rextents) - high_rec->ar_startext = mp->m_sb.sb_rextents - 1; + if (high_rec->ar_startext > mp->m_sb.sb_rextents) + high_rec->ar_startext = mp->m_sb.sb_rextents; /* Iterate the bitmap, looking for discrepancies. */ rtstart = low_rec->ar_startext; diff --git a/fs/xfs/xfs_bmap_util.c b/fs/xfs/xfs_bmap_util.c index c35009a86699..83b1e8c6c18f 100644 --- a/fs/xfs/xfs_bmap_util.c +++ b/fs/xfs/xfs_bmap_util.c @@ -685,12 +685,10 @@ out_unlock_iolock: } /* - * dead simple method of punching delalyed allocation blocks from a range in - * the inode. Walks a block at a time so will be slow, but is only executed in - * rare error cases so the overhead is not critical. This will always punch out - * both the start and end blocks, even if the ranges only partially overlap - * them, so it is up to the caller to ensure that partial blocks are not - * passed in. + * Dead simple method of punching delalyed allocation blocks from a range in + * the inode. This will always punch out both the start and end blocks, even + * if the ranges only partially overlap them, so it is up to the caller to + * ensure that partial blocks are not passed in. */ int xfs_bmap_punch_delalloc_range( @@ -698,63 +696,44 @@ xfs_bmap_punch_delalloc_range( xfs_fileoff_t start_fsb, xfs_fileoff_t length) { - xfs_fileoff_t remaining = length; + struct xfs_ifork *ifp = &ip->i_df; + xfs_fileoff_t end_fsb = start_fsb + length; + struct xfs_bmbt_irec got, del; + struct xfs_iext_cursor icur; int error = 0; ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL)); - do { - int done; - xfs_bmbt_irec_t imap; - int nimaps = 1; - xfs_fsblock_t firstblock; - struct xfs_defer_ops dfops; + if (!(ifp->if_flags & XFS_IFEXTENTS)) { + error = xfs_iread_extents(NULL, ip, XFS_DATA_FORK); + if (error) + return error; + } - /* - * Map the range first and check that it is a delalloc extent - * before trying to unmap the range. Otherwise we will be - * trying to remove a real extent (which requires a - * transaction) or a hole, which is probably a bad idea... - */ - error = xfs_bmapi_read(ip, start_fsb, 1, &imap, &nimaps, - XFS_BMAPI_ENTIRE); + if (!xfs_iext_lookup_extent_before(ip, ifp, &end_fsb, &icur, &got)) + return 0; - if (error) { - /* something screwed, just bail */ - if (!XFS_FORCED_SHUTDOWN(ip->i_mount)) { - xfs_alert(ip->i_mount, - "Failed delalloc mapping lookup ino %lld fsb %lld.", - ip->i_ino, start_fsb); - } - break; - } - if (!nimaps) { - /* nothing there */ - goto next_block; - } - if (imap.br_startblock != DELAYSTARTBLOCK) { - /* been converted, ignore */ - goto next_block; - } - WARN_ON(imap.br_blockcount == 0); + while (got.br_startoff + got.br_blockcount > start_fsb) { + del = got; + xfs_trim_extent(&del, start_fsb, length); /* - * Note: while we initialise the firstblock/dfops pair, they - * should never be used because blocks should never be - * allocated or freed for a delalloc extent and hence we need - * don't cancel or finish them after the xfs_bunmapi() call. + * A delete can push the cursor forward. Step back to the + * previous extent on non-delalloc or extents outside the + * target range. */ - xfs_defer_init(&dfops, &firstblock); - error = xfs_bunmapi(NULL, ip, start_fsb, 1, 0, 1, &firstblock, - &dfops, &done); - if (error) - break; + if (!del.br_blockcount || + !isnullstartblock(del.br_startblock)) { + if (!xfs_iext_prev_extent(ifp, &icur, &got)) + break; + continue; + } - ASSERT(!xfs_defer_has_unfinished_work(&dfops)); -next_block: - start_fsb++; - remaining--; - } while(remaining > 0); + error = xfs_bmap_del_extent_delay(ip, XFS_DATA_FORK, &icur, + &got, &del); + if (error || !xfs_iext_get_extent(ifp, &icur, &got)) + break; + } return error; } @@ -1208,7 +1187,22 @@ xfs_free_file_space( return 0; if (offset + len > XFS_ISIZE(ip)) len = XFS_ISIZE(ip) - offset; - return iomap_zero_range(VFS_I(ip), offset, len, NULL, &xfs_iomap_ops); + error = iomap_zero_range(VFS_I(ip), offset, len, NULL, &xfs_iomap_ops); + if (error) + return error; + + /* + * If we zeroed right up to EOF and EOF straddles a page boundary we + * must make sure that the post-EOF area is also zeroed because the + * page could be mmap'd and iomap_zero_range doesn't do that for us. + * Writeback of the eof page will do this, albeit clumsily. + */ + if (offset + len >= XFS_ISIZE(ip) && ((offset + len) & PAGE_MASK)) { + error = filemap_write_and_wait_range(VFS_I(ip)->i_mapping, + (offset + len) & ~PAGE_MASK, LLONG_MAX); + } + + return error; } /* @@ -1404,6 +1398,10 @@ xfs_insert_file_space( trace_xfs_insert_file_space(ip); + error = xfs_bmap_can_insert_extents(ip, stop_fsb, shift_fsb); + if (error) + return error; + error = xfs_prepare_shift(ip, offset); if (error) return error; diff --git a/fs/xfs/xfs_fsmap.c b/fs/xfs/xfs_fsmap.c index c34fa9c342f2..c7157bc48bd1 100644 --- a/fs/xfs/xfs_fsmap.c +++ b/fs/xfs/xfs_fsmap.c @@ -513,8 +513,8 @@ xfs_getfsmap_rtdev_rtbitmap_query( struct xfs_trans *tp, struct xfs_getfsmap_info *info) { - struct xfs_rtalloc_rec alow; - struct xfs_rtalloc_rec ahigh; + struct xfs_rtalloc_rec alow = { 0 }; + struct xfs_rtalloc_rec ahigh = { 0 }; int error; xfs_ilock(tp->t_mountp->m_rbmip, XFS_ILOCK_SHARED); diff --git a/fs/xfs/xfs_fsops.c b/fs/xfs/xfs_fsops.c index a7afcad6b711..3f2bd6032cf8 100644 --- a/fs/xfs/xfs_fsops.c +++ b/fs/xfs/xfs_fsops.c @@ -387,7 +387,7 @@ xfs_reserve_blocks( do { free = percpu_counter_sum(&mp->m_fdblocks) - mp->m_alloc_set_aside; - if (!free) + if (free <= 0) break; delta = request - mp->m_resblks; diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index 7a96c4e0ab5c..5df4de666cc1 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -3236,7 +3236,6 @@ xfs_iflush_cluster( struct xfs_inode *cip; int nr_found; int clcount = 0; - int bufwasdelwri; int i; pag = xfs_perag_get(mp, XFS_INO_TO_AGNO(mp, ip->i_ino)); @@ -3360,37 +3359,22 @@ cluster_corrupt_out: * inode buffer and shut down the filesystem. */ rcu_read_unlock(); - /* - * Clean up the buffer. If it was delwri, just release it -- - * brelse can handle it with no problems. If not, shut down the - * filesystem before releasing the buffer. - */ - bufwasdelwri = (bp->b_flags & _XBF_DELWRI_Q); - if (bufwasdelwri) - xfs_buf_relse(bp); - xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE); - if (!bufwasdelwri) { - /* - * Just like incore_relse: if we have b_iodone functions, - * mark the buffer as an error and call them. Otherwise - * mark it as stale and brelse. - */ - if (bp->b_iodone) { - bp->b_flags &= ~XBF_DONE; - xfs_buf_stale(bp); - xfs_buf_ioerror(bp, -EIO); - xfs_buf_ioend(bp); - } else { - xfs_buf_stale(bp); - xfs_buf_relse(bp); - } - } - /* - * Unlocks the flush lock + * We'll always have an inode attached to the buffer for completion + * process by the time we are called from xfs_iflush(). Hence we have + * always need to do IO completion processing to abort the inodes + * attached to the buffer. handle them just like the shutdown case in + * xfs_buf_submit(). */ + ASSERT(bp->b_iodone); + bp->b_flags &= ~XBF_DONE; + xfs_buf_stale(bp); + xfs_buf_ioerror(bp, -EIO); + xfs_buf_ioend(bp); + + /* abort the corrupt inode, as it was not attached to the buffer */ xfs_iflush_abort(cip, false); kmem_free(cilist); xfs_perag_put(pag); @@ -3486,12 +3470,17 @@ xfs_iflush( xfs_log_force(mp, 0); /* - * inode clustering: - * see if other inodes can be gathered into this write + * inode clustering: try to gather other inodes into this write + * + * Note: Any error during clustering will result in the filesystem + * being shut down and completion callbacks run on the cluster buffer. + * As we have already flushed and attached this inode to the buffer, + * it has already been aborted and released by xfs_iflush_cluster() and + * so we have no further error handling to do here. */ error = xfs_iflush_cluster(ip, bp); if (error) - goto cluster_corrupt_out; + return error; *bpp = bp; return 0; @@ -3500,12 +3489,8 @@ corrupt_out: if (bp) xfs_buf_relse(bp); xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE); -cluster_corrupt_out: - error = -EFSCORRUPTED; abort_out: - /* - * Unlocks the flush lock - */ + /* abort the corrupt inode, as it was not attached to the buffer */ xfs_iflush_abort(ip, false); return error; } diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c index 49f5492eed3b..55876dd02f0c 100644 --- a/fs/xfs/xfs_iomap.c +++ b/fs/xfs/xfs_iomap.c @@ -963,12 +963,13 @@ xfs_ilock_for_iomap( unsigned *lockmode) { unsigned mode = XFS_ILOCK_SHARED; + bool is_write = flags & (IOMAP_WRITE | IOMAP_ZERO); /* * COW writes may allocate delalloc space or convert unwritten COW * extents, so we need to make sure to take the lock exclusively here. */ - if (xfs_is_reflink_inode(ip) && (flags & (IOMAP_WRITE | IOMAP_ZERO))) { + if (xfs_is_reflink_inode(ip) && is_write) { /* * FIXME: It could still overwrite on unshared extents and not * need allocation. @@ -989,6 +990,7 @@ xfs_ilock_for_iomap( mode = XFS_ILOCK_EXCL; } +relock: if (flags & IOMAP_NOWAIT) { if (!xfs_ilock_nowait(ip, mode)) return -EAGAIN; @@ -996,6 +998,17 @@ xfs_ilock_for_iomap( xfs_ilock(ip, mode); } + /* + * The reflink iflag could have changed since the earlier unlocked + * check, so if we got ILOCK_SHARED for a write and but we're now a + * reflink inode we have to switch to ILOCK_EXCL and relock. + */ + if (mode == XFS_ILOCK_SHARED && is_write && xfs_is_reflink_inode(ip)) { + xfs_iunlock(ip, mode); + mode = XFS_ILOCK_EXCL; + goto relock; + } + *lockmode = mode; return 0; } diff --git a/fs/xfs/xfs_trans.c b/fs/xfs/xfs_trans.c index e040af120b69..524f543c5b82 100644 --- a/fs/xfs/xfs_trans.c +++ b/fs/xfs/xfs_trans.c @@ -258,7 +258,12 @@ xfs_trans_alloc( if (!(flags & XFS_TRANS_NO_WRITECOUNT)) sb_start_intwrite(mp->m_super); - WARN_ON(mp->m_super->s_writers.frozen == SB_FREEZE_COMPLETE); + /* + * Zero-reservation ("empty") transactions can't modify anything, so + * they're allowed to run while we're frozen. + */ + WARN_ON(resp->tr_logres > 0 && + mp->m_super->s_writers.frozen == SB_FREEZE_COMPLETE); atomic_inc(&mp->m_active_trans); tp = kmem_zone_zalloc(xfs_trans_zone, diff --git a/include/acpi/processor.h b/include/acpi/processor.h index 40a916efd7c0..1194a4c78d55 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -309,7 +309,7 @@ static inline void acpi_processor_ppc_exit(void) { return; } -static inline int acpi_processor_ppc_has_changed(struct acpi_processor *pr, +static inline void acpi_processor_ppc_has_changed(struct acpi_processor *pr, int event_flag) { static unsigned int printout = 1; @@ -320,7 +320,6 @@ static inline int acpi_processor_ppc_has_changed(struct acpi_processor *pr, "Consider compiling CPUfreq support into your kernel.\n"); printout = 0; } - return 0; } static inline int acpi_processor_get_bios_limit(int cpu, unsigned int *limit) { diff --git a/include/asm-generic/qspinlock_types.h b/include/asm-generic/qspinlock_types.h index 0763f065b975..d10f1e7d6ba8 100644 --- a/include/asm-generic/qspinlock_types.h +++ b/include/asm-generic/qspinlock_types.h @@ -63,7 +63,7 @@ typedef struct qspinlock { /* * Initializier */ -#define __ARCH_SPIN_LOCK_UNLOCKED { .val = ATOMIC_INIT(0) } +#define __ARCH_SPIN_LOCK_UNLOCKED { { .val = ATOMIC_INIT(0) } } /* * Bitfields in the atomic value: diff --git a/include/crypto/if_alg.h b/include/crypto/if_alg.h index cc414db9da0a..482461d8931d 100644 --- a/include/crypto/if_alg.h +++ b/include/crypto/if_alg.h @@ -245,7 +245,8 @@ ssize_t af_alg_sendpage(struct socket *sock, struct page *page, int offset, size_t size, int flags); void af_alg_free_resources(struct af_alg_async_req *areq); void af_alg_async_cb(struct crypto_async_request *_req, int err); -__poll_t af_alg_poll_mask(struct socket *sock, __poll_t events); +__poll_t af_alg_poll(struct file *file, struct socket *sock, + poll_table *wait); struct af_alg_async_req *af_alg_alloc_areq(struct sock *sk, unsigned int areqlen); int af_alg_get_rsgl(struct sock *sk, struct msghdr *msg, int flags, diff --git a/include/dt-bindings/bus/ti-sysc.h b/include/dt-bindings/bus/ti-sysc.h index 2c005376ac0e..7138384e2ef9 100644 --- a/include/dt-bindings/bus/ti-sysc.h +++ b/include/dt-bindings/bus/ti-sysc.h @@ -15,6 +15,8 @@ /* SmartReflex sysc found on 36xx and later */ #define SYSC_OMAP3_SR_ENAWAKEUP (1 << 26) +#define SYSC_DRA7_MCAN_ENAWAKEUP (1 << 4) + /* SYSCONFIG STANDBYMODE/MIDLEMODE/SIDLEMODE supported by hardware */ #define SYSC_IDLE_FORCE 0 #define SYSC_IDLE_NO 1 diff --git a/include/dt-bindings/clock/axg-audio-clkc.h b/include/dt-bindings/clock/axg-audio-clkc.h new file mode 100644 index 000000000000..fd9c362099d9 --- /dev/null +++ b/include/dt-bindings/clock/axg-audio-clkc.h @@ -0,0 +1,94 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ +/* + * Copyright (c) 2018 Baylibre SAS. + * Author: Jerome Brunet <jbrunet@baylibre.com> + */ + +#ifndef __AXG_AUDIO_CLKC_BINDINGS_H +#define __AXG_AUDIO_CLKC_BINDINGS_H + +#define AUD_CLKID_SLV_SCLK0 9 +#define AUD_CLKID_SLV_SCLK1 10 +#define AUD_CLKID_SLV_SCLK2 11 +#define AUD_CLKID_SLV_SCLK3 12 +#define AUD_CLKID_SLV_SCLK4 13 +#define AUD_CLKID_SLV_SCLK5 14 +#define AUD_CLKID_SLV_SCLK6 15 +#define AUD_CLKID_SLV_SCLK7 16 +#define AUD_CLKID_SLV_SCLK8 17 +#define AUD_CLKID_SLV_SCLK9 18 +#define AUD_CLKID_SLV_LRCLK0 19 +#define AUD_CLKID_SLV_LRCLK1 20 +#define AUD_CLKID_SLV_LRCLK2 21 +#define AUD_CLKID_SLV_LRCLK3 22 +#define AUD_CLKID_SLV_LRCLK4 23 +#define AUD_CLKID_SLV_LRCLK5 24 +#define AUD_CLKID_SLV_LRCLK6 25 +#define AUD_CLKID_SLV_LRCLK7 26 +#define AUD_CLKID_SLV_LRCLK8 27 +#define AUD_CLKID_SLV_LRCLK9 28 +#define AUD_CLKID_DDR_ARB 29 +#define AUD_CLKID_PDM 30 +#define AUD_CLKID_TDMIN_A 31 +#define AUD_CLKID_TDMIN_B 32 +#define AUD_CLKID_TDMIN_C 33 +#define AUD_CLKID_TDMIN_LB 34 +#define AUD_CLKID_TDMOUT_A 35 +#define AUD_CLKID_TDMOUT_B 36 +#define AUD_CLKID_TDMOUT_C 37 +#define AUD_CLKID_FRDDR_A 38 +#define AUD_CLKID_FRDDR_B 39 +#define AUD_CLKID_FRDDR_C 40 +#define AUD_CLKID_TODDR_A 41 +#define AUD_CLKID_TODDR_B 42 +#define AUD_CLKID_TODDR_C 43 +#define AUD_CLKID_LOOPBACK 44 +#define AUD_CLKID_SPDIFIN 45 +#define AUD_CLKID_SPDIFOUT 46 +#define AUD_CLKID_RESAMPLE 47 +#define AUD_CLKID_POWER_DETECT 48 +#define AUD_CLKID_MST_A_MCLK 49 +#define AUD_CLKID_MST_B_MCLK 50 +#define AUD_CLKID_MST_C_MCLK 51 +#define AUD_CLKID_MST_D_MCLK 52 +#define AUD_CLKID_MST_E_MCLK 53 +#define AUD_CLKID_MST_F_MCLK 54 +#define AUD_CLKID_SPDIFOUT_CLK 55 +#define AUD_CLKID_SPDIFIN_CLK 56 +#define AUD_CLKID_PDM_DCLK 57 +#define AUD_CLKID_PDM_SYSCLK 58 +#define AUD_CLKID_MST_A_SCLK 79 +#define AUD_CLKID_MST_B_SCLK 80 +#define AUD_CLKID_MST_C_SCLK 81 +#define AUD_CLKID_MST_D_SCLK 82 +#define AUD_CLKID_MST_E_SCLK 83 +#define AUD_CLKID_MST_F_SCLK 84 +#define AUD_CLKID_MST_A_LRCLK 86 +#define AUD_CLKID_MST_B_LRCLK 87 +#define AUD_CLKID_MST_C_LRCLK 88 +#define AUD_CLKID_MST_D_LRCLK 89 +#define AUD_CLKID_MST_E_LRCLK 90 +#define AUD_CLKID_MST_F_LRCLK 91 +#define AUD_CLKID_TDMIN_A_SCLK_SEL 116 +#define AUD_CLKID_TDMIN_B_SCLK_SEL 117 +#define AUD_CLKID_TDMIN_C_SCLK_SEL 118 +#define AUD_CLKID_TDMIN_LB_SCLK_SEL 119 +#define AUD_CLKID_TDMOUT_A_SCLK_SEL 120 +#define AUD_CLKID_TDMOUT_B_SCLK_SEL 121 +#define AUD_CLKID_TDMOUT_C_SCLK_SEL 122 +#define AUD_CLKID_TDMIN_A_SCLK 123 +#define AUD_CLKID_TDMIN_B_SCLK 124 +#define AUD_CLKID_TDMIN_C_SCLK 125 +#define AUD_CLKID_TDMIN_LB_SCLK 126 +#define AUD_CLKID_TDMOUT_A_SCLK 127 +#define AUD_CLKID_TDMOUT_B_SCLK 128 +#define AUD_CLKID_TDMOUT_C_SCLK 129 +#define AUD_CLKID_TDMIN_A_LRCLK 130 +#define AUD_CLKID_TDMIN_B_LRCLK 131 +#define AUD_CLKID_TDMIN_C_LRCLK 132 +#define AUD_CLKID_TDMIN_LB_LRCLK 133 +#define AUD_CLKID_TDMOUT_A_LRCLK 134 +#define AUD_CLKID_TDMOUT_B_LRCLK 135 +#define AUD_CLKID_TDMOUT_C_LRCLK 136 + +#endif /* __AXG_AUDIO_CLKC_BINDINGS_H */ diff --git a/include/dt-bindings/clock/axg-clkc.h b/include/dt-bindings/clock/axg-clkc.h index 555937a25504..fd1f938c38d1 100644 --- a/include/dt-bindings/clock/axg-clkc.h +++ b/include/dt-bindings/clock/axg-clkc.h @@ -68,5 +68,9 @@ #define CLKID_SD_EMMC_B_CLK0 59 #define CLKID_SD_EMMC_C_CLK0 60 #define CLKID_HIFI_PLL 69 +#define CLKID_PCIE_CML_EN0 79 +#define CLKID_PCIE_CML_EN1 80 +#define CLKID_MIPI_ENABLE 81 +#define CLKID_GEN_CLK 84 #endif /* __AXG_CLKC_H */ diff --git a/include/dt-bindings/clock/dra7.h b/include/dt-bindings/clock/dra7.h index 5e1061b15aed..d7549c57cac3 100644 --- a/include/dt-bindings/clock/dra7.h +++ b/include/dt-bindings/clock/dra7.h @@ -168,5 +168,6 @@ #define DRA7_COUNTER_32K_CLKCTRL DRA7_CLKCTRL_INDEX(0x50) #define DRA7_UART10_CLKCTRL DRA7_CLKCTRL_INDEX(0x80) #define DRA7_DCAN1_CLKCTRL DRA7_CLKCTRL_INDEX(0x88) +#define DRA7_ADC_CLKCTRL DRA7_CLKCTRL_INDEX(0xa0) #endif diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt-bindings/clock/gxbb-clkc.h index 7a892be90549..3979d48c025f 100644 --- a/include/dt-bindings/clock/gxbb-clkc.h +++ b/include/dt-bindings/clock/gxbb-clkc.h @@ -127,5 +127,6 @@ #define CLKID_VAPB 140 #define CLKID_VDEC_1 153 #define CLKID_VDEC_HEVC 156 +#define CLKID_GEN_CLK 159 #endif /* __GXBB_CLKC_H */ diff --git a/include/dt-bindings/clock/imx6ul-clock.h b/include/dt-bindings/clock/imx6ul-clock.h index 9564597cbfac..f8e0476a3a0e 100644 --- a/include/dt-bindings/clock/imx6ul-clock.h +++ b/include/dt-bindings/clock/imx6ul-clock.h @@ -235,27 +235,31 @@ #define IMX6UL_CLK_CSI_PODF 222 #define IMX6UL_CLK_PLL3_120M 223 #define IMX6UL_CLK_KPP 224 -#define IMX6UL_CLK_CKO1_SEL 225 -#define IMX6UL_CLK_CKO1_PODF 226 -#define IMX6UL_CLK_CKO1 227 -#define IMX6UL_CLK_CKO2_SEL 228 -#define IMX6UL_CLK_CKO2_PODF 229 -#define IMX6UL_CLK_CKO2 230 -#define IMX6UL_CLK_CKO 231 +#define IMX6ULL_CLK_ESAI_PRED 225 +#define IMX6ULL_CLK_ESAI_PODF 226 +#define IMX6ULL_CLK_ESAI_EXTAL 227 +#define IMX6ULL_CLK_ESAI_MEM 228 +#define IMX6ULL_CLK_ESAI_IPG 229 +#define IMX6ULL_CLK_DCP_CLK 230 +#define IMX6ULL_CLK_EPDC_PRE_SEL 231 +#define IMX6ULL_CLK_EPDC_SEL 232 +#define IMX6ULL_CLK_EPDC_PODF 233 +#define IMX6ULL_CLK_EPDC_ACLK 234 +#define IMX6ULL_CLK_EPDC_PIX 235 +#define IMX6ULL_CLK_ESAI_SEL 236 +#define IMX6UL_CLK_CKO1_SEL 237 +#define IMX6UL_CLK_CKO1_PODF 238 +#define IMX6UL_CLK_CKO1 239 +#define IMX6UL_CLK_CKO2_SEL 240 +#define IMX6UL_CLK_CKO2_PODF 241 +#define IMX6UL_CLK_CKO2 242 +#define IMX6UL_CLK_CKO 243 +#define IMX6UL_CLK_GPIO1 244 +#define IMX6UL_CLK_GPIO2 245 +#define IMX6UL_CLK_GPIO3 246 +#define IMX6UL_CLK_GPIO4 247 +#define IMX6UL_CLK_GPIO5 248 -/* For i.MX6ULL */ -#define IMX6ULL_CLK_ESAI_PRED 232 -#define IMX6ULL_CLK_ESAI_PODF 233 -#define IMX6ULL_CLK_ESAI_EXTAL 234 -#define IMX6ULL_CLK_ESAI_MEM 235 -#define IMX6ULL_CLK_ESAI_IPG 236 -#define IMX6ULL_CLK_DCP_CLK 237 -#define IMX6ULL_CLK_EPDC_PRE_SEL 238 -#define IMX6ULL_CLK_EPDC_SEL 239 -#define IMX6ULL_CLK_EPDC_PODF 240 -#define IMX6ULL_CLK_EPDC_ACLK 241 -#define IMX6ULL_CLK_EPDC_PIX 242 -#define IMX6ULL_CLK_ESAI_SEL 243 -#define IMX6UL_CLK_END 244 +#define IMX6UL_CLK_END 249 #endif /* __DT_BINDINGS_CLOCK_IMX6UL_H */ diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 4b35a66383f9..e54f40974eb0 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -443,6 +443,9 @@ int acpi_check_resource_conflict(const struct resource *res); int acpi_check_region(resource_size_t start, resource_size_t n, const char *name); +acpi_status acpi_release_memory(acpi_handle handle, struct resource *res, + u32 level); + int acpi_resources_are_enforced(void); #ifdef CONFIG_HIBERNATION diff --git a/include/linux/atmdev.h b/include/linux/atmdev.h index 0c27515d2cf6..8124815eb121 100644 --- a/include/linux/atmdev.h +++ b/include/linux/atmdev.h @@ -214,6 +214,7 @@ struct atmphy_ops { struct atm_skb_data { struct atm_vcc *vcc; /* ATM VCC */ unsigned long atm_options; /* ATM layer options */ + unsigned int acct_truesize; /* truesize accounted to vcc */ }; #define VCC_HTABLE_SIZE 32 @@ -241,6 +242,20 @@ void vcc_insert_socket(struct sock *sk); void atm_dev_release_vccs(struct atm_dev *dev); +static inline void atm_account_tx(struct atm_vcc *vcc, struct sk_buff *skb) +{ + /* + * Because ATM skbs may not belong to a sock (and we don't + * necessarily want to), skb->truesize may be adjusted, + * escaping the hack in pskb_expand_head() which avoids + * doing so for some cases. So stash the value of truesize + * at the time we accounted it, and atm_pop_raw() can use + * that value later, in case it changes. + */ + refcount_add(skb->truesize, &sk_atm(vcc)->sk_wmem_alloc); + ATM_SKB(skb)->acct_truesize = skb->truesize; + ATM_SKB(skb)->atm_options = vcc->atm_options; +} static inline void atm_force_charge(struct atm_vcc *vcc,int truesize) { diff --git a/include/linux/backing-dev-defs.h b/include/linux/backing-dev-defs.h index 0bd432a4d7bd..24251762c20c 100644 --- a/include/linux/backing-dev-defs.h +++ b/include/linux/backing-dev-defs.h @@ -22,7 +22,6 @@ struct dentry; */ enum wb_state { WB_registered, /* bdi_register() was done */ - WB_shutting_down, /* wb_shutdown() in progress */ WB_writeback_running, /* Writeback is in progress */ WB_has_dirty_io, /* Dirty inodes on ->b_{dirty|io|more_io} */ WB_start_all, /* nr_pages == 0 (all) work pending */ @@ -189,6 +188,7 @@ struct backing_dev_info { #ifdef CONFIG_CGROUP_WRITEBACK struct radix_tree_root cgwb_tree; /* radix tree of active cgroup wbs */ struct rb_root cgwb_congested_tree; /* their congested states */ + struct mutex cgwb_release_mutex; /* protect shutdown of wb structs */ #else struct bdi_writeback_congested *wb_congested; #endif diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 9154570edf29..79226ca8f80f 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -1119,8 +1119,8 @@ static inline unsigned int blk_max_size_offset(struct request_queue *q, if (!q->limits.chunk_sectors) return q->limits.max_sectors; - return q->limits.chunk_sectors - - (offset & (q->limits.chunk_sectors - 1)); + return min(q->limits.max_sectors, (unsigned int)(q->limits.chunk_sectors - + (offset & (q->limits.chunk_sectors - 1)))); } static inline unsigned int blk_rq_get_max_sectors(struct request *rq, diff --git a/include/linux/bpf.h b/include/linux/bpf.h index 995c3b1e59bf..7df32a3200f7 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -488,12 +488,15 @@ void bpf_patch_call_args(struct bpf_insn *insn, u32 stack_depth); /* Map specifics */ struct xdp_buff; +struct sk_buff; struct bpf_dtab_netdev *__dev_map_lookup_elem(struct bpf_map *map, u32 key); void __dev_map_insert_ctx(struct bpf_map *map, u32 index); void __dev_map_flush(struct bpf_map *map); int dev_map_enqueue(struct bpf_dtab_netdev *dst, struct xdp_buff *xdp, struct net_device *dev_rx); +int dev_map_generic_redirect(struct bpf_dtab_netdev *dst, struct sk_buff *skb, + struct bpf_prog *xdp_prog); struct bpf_cpu_map_entry *__cpu_map_lookup_elem(struct bpf_map *map, u32 key); void __cpu_map_insert_ctx(struct bpf_map *map, u32 index); @@ -586,6 +589,15 @@ int dev_map_enqueue(struct bpf_dtab_netdev *dst, struct xdp_buff *xdp, return 0; } +struct sk_buff; + +static inline int dev_map_generic_redirect(struct bpf_dtab_netdev *dst, + struct sk_buff *skb, + struct bpf_prog *xdp_prog) +{ + return 0; +} + static inline struct bpf_cpu_map_entry *__cpu_map_lookup_elem(struct bpf_map *map, u32 key) { diff --git a/include/linux/compat.h b/include/linux/compat.h index b1a5562b3215..c68acc47da57 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -72,6 +72,9 @@ */ #ifndef COMPAT_SYSCALL_DEFINEx #define COMPAT_SYSCALL_DEFINEx(x, name, ...) \ + __diag_push(); \ + __diag_ignore(GCC, 8, "-Wattribute-alias", \ + "Type aliasing is used to sanitize syscall arguments");\ asmlinkage long compat_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)); \ asmlinkage long compat_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)) \ __attribute__((alias(__stringify(__se_compat_sys##name)))); \ @@ -80,8 +83,11 @@ asmlinkage long __se_compat_sys##name(__MAP(x,__SC_LONG,__VA_ARGS__)); \ asmlinkage long __se_compat_sys##name(__MAP(x,__SC_LONG,__VA_ARGS__)) \ { \ - return __do_compat_sys##name(__MAP(x,__SC_DELOUSE,__VA_ARGS__));\ + long ret = __do_compat_sys##name(__MAP(x,__SC_DELOUSE,__VA_ARGS__));\ + __MAP(x,__SC_TEST,__VA_ARGS__); \ + return ret; \ } \ + __diag_pop(); \ static inline long __do_compat_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)) #endif /* COMPAT_SYSCALL_DEFINEx */ diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h index f1a7492a5cc8..fd282c7d3e5e 100644 --- a/include/linux/compiler-gcc.h +++ b/include/linux/compiler-gcc.h @@ -347,3 +347,28 @@ #if GCC_VERSION >= 50100 #define COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW 1 #endif + +/* + * Turn individual warnings and errors on and off locally, depending + * on version. + */ +#define __diag_GCC(version, severity, s) \ + __diag_GCC_ ## version(__diag_GCC_ ## severity s) + +/* Severity used in pragma directives */ +#define __diag_GCC_ignore ignored +#define __diag_GCC_warn warning +#define __diag_GCC_error error + +/* Compilers before gcc-4.6 do not understand "#pragma GCC diagnostic push" */ +#if GCC_VERSION >= 40600 +#define __diag_str1(s) #s +#define __diag_str(s) __diag_str1(s) +#define __diag(s) _Pragma(__diag_str(GCC diagnostic s)) +#endif + +#if GCC_VERSION >= 80000 +#define __diag_GCC_8(s) __diag(s) +#else +#define __diag_GCC_8(s) +#endif diff --git a/include/linux/compiler_types.h b/include/linux/compiler_types.h index 6b79a9bba9a7..a8ba6b04152c 100644 --- a/include/linux/compiler_types.h +++ b/include/linux/compiler_types.h @@ -271,4 +271,22 @@ struct ftrace_likely_data { # define __native_word(t) (sizeof(t) == sizeof(char) || sizeof(t) == sizeof(short) || sizeof(t) == sizeof(int) || sizeof(t) == sizeof(long)) #endif +#ifndef __diag +#define __diag(string) +#endif + +#ifndef __diag_GCC +#define __diag_GCC(version, severity, string) +#endif + +#define __diag_push() __diag(push) +#define __diag_pop() __diag(pop) + +#define __diag_ignore(compiler, version, option, comment) \ + __diag_ ## compiler(version, ignore, option) +#define __diag_warn(compiler, version, option, comment) \ + __diag_ ## compiler(version, warn, option) +#define __diag_error(compiler, version, option, comment) \ + __diag_ ## compiler(version, error, option) + #endif /* __LINUX_COMPILER_TYPES_H */ diff --git a/include/linux/dax.h b/include/linux/dax.h index 3855e3800f48..deb0f663252f 100644 --- a/include/linux/dax.h +++ b/include/linux/dax.h @@ -135,7 +135,7 @@ void dax_flush(struct dax_device *dax_dev, void *addr, size_t size); ssize_t dax_iomap_rw(struct kiocb *iocb, struct iov_iter *iter, const struct iomap_ops *ops); -int dax_iomap_fault(struct vm_fault *vmf, enum page_entry_size pe_size, +vm_fault_t dax_iomap_fault(struct vm_fault *vmf, enum page_entry_size pe_size, pfn_t *pfnp, int *errp, const struct iomap_ops *ops); vm_fault_t dax_finish_sync_fault(struct vm_fault *vmf, enum page_entry_size pe_size, pfn_t pfn); diff --git a/include/linux/dma-contiguous.h b/include/linux/dma-contiguous.h index b67bf6ac907d..3c5a4cb3eb95 100644 --- a/include/linux/dma-contiguous.h +++ b/include/linux/dma-contiguous.h @@ -48,7 +48,7 @@ * CMA should not be used by the device drivers directly. It is * only a helper framework for dma-mapping subsystem. * - * For more information, see kernel-docs in drivers/base/dma-contiguous.c + * For more information, see kernel-docs in kernel/dma/contiguous.c */ #ifdef __KERNEL__ diff --git a/include/linux/filter.h b/include/linux/filter.h index 45fc0f5000d8..20f2659dd829 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -19,6 +19,7 @@ #include <linux/cryptohash.h> #include <linux/set_memory.h> #include <linux/kallsyms.h> +#include <linux/if_vlan.h> #include <net/sch_generic.h> @@ -469,8 +470,11 @@ struct sock_fprog_kern { }; struct bpf_binary_header { - unsigned int pages; - u8 image[]; + u16 pages; + u16 locked:1; + + /* Some arches need word alignment for their instructions */ + u8 image[] __aligned(4); }; struct bpf_prog { @@ -671,15 +675,18 @@ bpf_ctx_narrow_access_ok(u32 off, u32 size, u32 size_default) #define bpf_classic_proglen(fprog) (fprog->len * sizeof(fprog->filter[0])) -#ifdef CONFIG_ARCH_HAS_SET_MEMORY static inline void bpf_prog_lock_ro(struct bpf_prog *fp) { +#ifdef CONFIG_ARCH_HAS_SET_MEMORY fp->locked = 1; - WARN_ON_ONCE(set_memory_ro((unsigned long)fp, fp->pages)); + if (set_memory_ro((unsigned long)fp, fp->pages)) + fp->locked = 0; +#endif } static inline void bpf_prog_unlock_ro(struct bpf_prog *fp) { +#ifdef CONFIG_ARCH_HAS_SET_MEMORY if (fp->locked) { WARN_ON_ONCE(set_memory_rw((unsigned long)fp, fp->pages)); /* In case set_memory_rw() fails, we want to be the first @@ -687,34 +694,30 @@ static inline void bpf_prog_unlock_ro(struct bpf_prog *fp) */ fp->locked = 0; } +#endif } static inline void bpf_jit_binary_lock_ro(struct bpf_binary_header *hdr) { - WARN_ON_ONCE(set_memory_ro((unsigned long)hdr, hdr->pages)); -} - -static inline void bpf_jit_binary_unlock_ro(struct bpf_binary_header *hdr) -{ - WARN_ON_ONCE(set_memory_rw((unsigned long)hdr, hdr->pages)); -} -#else -static inline void bpf_prog_lock_ro(struct bpf_prog *fp) -{ -} - -static inline void bpf_prog_unlock_ro(struct bpf_prog *fp) -{ -} - -static inline void bpf_jit_binary_lock_ro(struct bpf_binary_header *hdr) -{ +#ifdef CONFIG_ARCH_HAS_SET_MEMORY + hdr->locked = 1; + if (set_memory_ro((unsigned long)hdr, hdr->pages)) + hdr->locked = 0; +#endif } static inline void bpf_jit_binary_unlock_ro(struct bpf_binary_header *hdr) { +#ifdef CONFIG_ARCH_HAS_SET_MEMORY + if (hdr->locked) { + WARN_ON_ONCE(set_memory_rw((unsigned long)hdr, hdr->pages)); + /* In case set_memory_rw() fails, we want to be the first + * to crash here instead of some random place later on. + */ + hdr->locked = 0; + } +#endif } -#endif /* CONFIG_ARCH_HAS_SET_MEMORY */ static inline struct bpf_binary_header * bpf_jit_binary_hdr(const struct bpf_prog *fp) @@ -725,6 +728,22 @@ bpf_jit_binary_hdr(const struct bpf_prog *fp) return (void *)addr; } +#ifdef CONFIG_ARCH_HAS_SET_MEMORY +static inline int bpf_prog_check_pages_ro_single(const struct bpf_prog *fp) +{ + if (!fp->locked) + return -ENOLCK; + if (fp->jited) { + const struct bpf_binary_header *hdr = bpf_jit_binary_hdr(fp); + + if (!hdr->locked) + return -ENOLCK; + } + + return 0; +} +#endif + int sk_filter_trim_cap(struct sock *sk, struct sk_buff *skb, unsigned int cap); static inline int sk_filter(struct sock *sk, struct sk_buff *skb) { @@ -786,6 +805,21 @@ static inline bool bpf_dump_raw_ok(void) struct bpf_prog *bpf_patch_insn_single(struct bpf_prog *prog, u32 off, const struct bpf_insn *patch, u32 len); +static inline int __xdp_generic_ok_fwd_dev(struct sk_buff *skb, + struct net_device *fwd) +{ + unsigned int len; + + if (unlikely(!(fwd->flags & IFF_UP))) + return -ENETDOWN; + + len = fwd->mtu + fwd->hard_header_len + VLAN_HLEN; + if (skb->len > len) + return -EMSGSIZE; + + return 0; +} + /* The pair of xdp_do_redirect and xdp_do_flush_map MUST be called in the * same cpu context. Further for best results no more than a single map * for the do_redirect/do_flush pair should be used. This limitation is @@ -961,6 +995,9 @@ static inline void bpf_prog_kallsyms_del(struct bpf_prog *fp) } #endif /* CONFIG_BPF_JIT */ +void bpf_prog_kallsyms_del_subprogs(struct bpf_prog *fp); +void bpf_prog_kallsyms_del_all(struct bpf_prog *fp); + #define BPF_ANC BIT(15) static inline bool bpf_needs_clear_a(const struct sock_filter *first) diff --git a/include/linux/fs.h b/include/linux/fs.h index 5c91108846db..d78d146a98da 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1720,8 +1720,6 @@ struct file_operations { int (*iterate) (struct file *, struct dir_context *); int (*iterate_shared) (struct file *, struct dir_context *); __poll_t (*poll) (struct file *, struct poll_table_struct *); - struct wait_queue_head * (*get_poll_head)(struct file *, __poll_t); - __poll_t (*poll_mask) (struct file *, __poll_t); long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long); long (*compat_ioctl) (struct file *, unsigned int, unsigned long); int (*mmap) (struct file *, struct vm_area_struct *); diff --git a/include/linux/iio/buffer-dma.h b/include/linux/iio/buffer-dma.h index 767467d886de..67c75372b691 100644 --- a/include/linux/iio/buffer-dma.h +++ b/include/linux/iio/buffer-dma.h @@ -141,7 +141,7 @@ int iio_dma_buffer_read(struct iio_buffer *buffer, size_t n, char __user *user_buffer); size_t iio_dma_buffer_data_available(struct iio_buffer *buffer); int iio_dma_buffer_set_bytes_per_datum(struct iio_buffer *buffer, size_t bpd); -int iio_dma_buffer_set_length(struct iio_buffer *buffer, int length); +int iio_dma_buffer_set_length(struct iio_buffer *buffer, unsigned int length); int iio_dma_buffer_request_update(struct iio_buffer *buffer); int iio_dma_buffer_init(struct iio_dma_buffer_queue *queue, diff --git a/include/linux/input/mt.h b/include/linux/input/mt.h index d7188de4db96..3f4bf60b0bb5 100644 --- a/include/linux/input/mt.h +++ b/include/linux/input/mt.h @@ -100,7 +100,7 @@ static inline bool input_is_mt_axis(int axis) return axis == ABS_MT_SLOT || input_is_mt_value(axis); } -void input_mt_report_slot_state(struct input_dev *dev, +bool input_mt_report_slot_state(struct input_dev *dev, unsigned int tool_type, bool active); void input_mt_report_finger_count(struct input_dev *dev, int count); diff --git a/include/linux/irq.h b/include/linux/irq.h index 4bd2f34947f4..201de12a9957 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -503,6 +503,7 @@ struct irq_chip { * IRQCHIP_SKIP_SET_WAKE: Skip chip.irq_set_wake(), for this irq chip * IRQCHIP_ONESHOT_SAFE: One shot does not require mask/unmask * IRQCHIP_EOI_THREADED: Chip requires eoi() on unmask in threaded mode + * IRQCHIP_SUPPORTS_LEVEL_MSI Chip can provide two doorbells for Level MSIs */ enum { IRQCHIP_SET_TYPE_MASKED = (1 << 0), diff --git a/include/linux/irqdesc.h b/include/linux/irqdesc.h index 25b33b664537..dd1e40ddac7d 100644 --- a/include/linux/irqdesc.h +++ b/include/linux/irqdesc.h @@ -145,11 +145,6 @@ static inline void *irq_desc_get_handler_data(struct irq_desc *desc) return desc->irq_common_data.handler_data; } -static inline struct msi_desc *irq_desc_get_msi_desc(struct irq_desc *desc) -{ - return desc->irq_common_data.msi_desc; -} - /* * Architectures call this to let the generic IRQ layer * handle an interrupt. diff --git a/include/linux/kernel.h b/include/linux/kernel.h index d23123238534..941dc0a5a877 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -666,7 +666,7 @@ do { \ * your code. (Extra memory is used for special buffers that are * allocated when trace_printk() is used.) * - * A little optization trick is done here. If there's only one + * A little optimization trick is done here. If there's only one * argument, there's no need to scan the string for printf formats. * The trace_puts() will suffice. But how can we take advantage of * using trace_puts() when trace_printk() has only one argument? diff --git a/include/linux/memory.h b/include/linux/memory.h index 31ca3e28b0eb..a6ddefc60517 100644 --- a/include/linux/memory.h +++ b/include/linux/memory.h @@ -38,6 +38,7 @@ struct memory_block { int arch_get_memory_phys_device(unsigned long start_pfn); unsigned long memory_block_size_bytes(void); +int set_memory_block_size_order(unsigned int order); /* These states are exposed to userspace as text strings in sysfs */ #define MEM_ONLINE (1<<0) /* exposed to userspace */ diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index 2014bd19f28e..96a71a648eed 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -501,6 +501,7 @@ enum dmi_field { DMI_PRODUCT_VERSION, DMI_PRODUCT_SERIAL, DMI_PRODUCT_UUID, + DMI_PRODUCT_SKU, DMI_PRODUCT_FAMILY, DMI_BOARD_VENDOR, DMI_BOARD_NAME, diff --git a/include/linux/net.h b/include/linux/net.h index 08b6eb964dd6..6554d3ba4396 100644 --- a/include/linux/net.h +++ b/include/linux/net.h @@ -147,7 +147,6 @@ struct proto_ops { int (*getname) (struct socket *sock, struct sockaddr *addr, int peer); - __poll_t (*poll_mask) (struct socket *sock, __poll_t events); __poll_t (*poll) (struct file *file, struct socket *sock, struct poll_table_struct *wait); int (*ioctl) (struct socket *sock, unsigned int cmd, diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 9dee3c23895d..712eed156d09 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -1438,6 +1438,8 @@ enum { NFS_IOHDR_EOF, NFS_IOHDR_REDO, NFS_IOHDR_STAT, + NFS_IOHDR_RESEND_PNFS, + NFS_IOHDR_RESEND_MDS, }; struct nfs_io_completion; diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h index 990aad477458..2efa3470a451 100644 --- a/include/linux/platform_data/ti-sysc.h +++ b/include/linux/platform_data/ti-sysc.h @@ -14,6 +14,7 @@ enum ti_sysc_module_type { TI_SYSC_OMAP4_SR, TI_SYSC_OMAP4_MCASP, TI_SYSC_OMAP4_USB_HOST_FS, + TI_SYSC_DRA7_MCAN, }; struct ti_sysc_cookie { diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h index 9206a4fef9ac..cb8d84090cfb 100644 --- a/include/linux/pm_domain.h +++ b/include/linux/pm_domain.h @@ -234,7 +234,7 @@ struct generic_pm_domain *of_genpd_remove_last(struct device_node *np); int of_genpd_parse_idle_states(struct device_node *dn, struct genpd_power_state **states, int *n); unsigned int of_genpd_opp_to_performance_state(struct device *dev, - struct device_node *opp_node); + struct device_node *np); int genpd_dev_pm_attach(struct device *dev); struct device *genpd_dev_pm_attach_by_id(struct device *dev, @@ -274,9 +274,9 @@ static inline int of_genpd_parse_idle_states(struct device_node *dn, static inline unsigned int of_genpd_opp_to_performance_state(struct device *dev, - struct device_node *opp_node) + struct device_node *np) { - return -ENODEV; + return 0; } static inline int genpd_dev_pm_attach(struct device *dev) diff --git a/include/linux/poll.h b/include/linux/poll.h index fdf86b4cbc71..7e0fdcf905d2 100644 --- a/include/linux/poll.h +++ b/include/linux/poll.h @@ -74,18 +74,18 @@ static inline void init_poll_funcptr(poll_table *pt, poll_queue_proc qproc) pt->_key = ~(__poll_t)0; /* all events enabled */ } -static inline bool file_has_poll_mask(struct file *file) +static inline bool file_can_poll(struct file *file) { - return file->f_op->get_poll_head && file->f_op->poll_mask; + return file->f_op->poll; } -static inline bool file_can_poll(struct file *file) +static inline __poll_t vfs_poll(struct file *file, struct poll_table_struct *pt) { - return file->f_op->poll || file_has_poll_mask(file); + if (unlikely(!file->f_op->poll)) + return DEFAULT_POLLMASK; + return file->f_op->poll(file, pt); } -__poll_t vfs_poll(struct file *file, struct poll_table_struct *pt); - struct poll_table_entry { struct file *filp; __poll_t key; diff --git a/include/linux/refcount.h b/include/linux/refcount.h index 4193c41e383a..a685da2c4522 100644 --- a/include/linux/refcount.h +++ b/include/linux/refcount.h @@ -98,5 +98,7 @@ extern __must_check bool refcount_dec_if_one(refcount_t *r); extern __must_check bool refcount_dec_not_one(refcount_t *r); extern __must_check bool refcount_dec_and_mutex_lock(refcount_t *r, struct mutex *lock); extern __must_check bool refcount_dec_and_lock(refcount_t *r, spinlock_t *lock); - +extern __must_check bool refcount_dec_and_lock_irqsave(refcount_t *r, + spinlock_t *lock, + unsigned long *flags); #endif /* _LINUX_REFCOUNT_H */ diff --git a/include/linux/rmi.h b/include/linux/rmi.h index 64125443f8a6..5ef5c7c412a7 100644 --- a/include/linux/rmi.h +++ b/include/linux/rmi.h @@ -354,6 +354,8 @@ struct rmi_driver_data { struct mutex irq_mutex; struct input_dev *input; + struct irq_domain *irqdomain; + u8 pdt_props; u8 num_rx_electrodes; diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h index 51f52020ad5f..093aa57120b0 100644 --- a/include/linux/scatterlist.h +++ b/include/linux/scatterlist.h @@ -9,9 +9,6 @@ #include <asm/io.h> struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif unsigned long page_link; unsigned int offset; unsigned int length; @@ -64,7 +61,6 @@ struct sg_table { * */ -#define SG_MAGIC 0x87654321 #define SG_CHAIN 0x01UL #define SG_END 0x02UL @@ -98,7 +94,6 @@ static inline void sg_assign_page(struct scatterlist *sg, struct page *page) */ BUG_ON((unsigned long) page & (SG_CHAIN | SG_END)); #ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); BUG_ON(sg_is_chain(sg)); #endif sg->page_link = page_link | (unsigned long) page; @@ -129,7 +124,6 @@ static inline void sg_set_page(struct scatterlist *sg, struct page *page, static inline struct page *sg_page(struct scatterlist *sg) { #ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); BUG_ON(sg_is_chain(sg)); #endif return (struct page *)((sg)->page_link & ~(SG_CHAIN | SG_END)); @@ -195,9 +189,6 @@ static inline void sg_chain(struct scatterlist *prv, unsigned int prv_nents, **/ static inline void sg_mark_end(struct scatterlist *sg) { -#ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); -#endif /* * Set termination bit, clear potential chain bit */ @@ -215,9 +206,6 @@ static inline void sg_mark_end(struct scatterlist *sg) **/ static inline void sg_unmark_end(struct scatterlist *sg) { -#ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); -#endif sg->page_link &= ~SG_END; } @@ -260,12 +248,6 @@ static inline void *sg_virt(struct scatterlist *sg) static inline void sg_init_marker(struct scatterlist *sgl, unsigned int nents) { -#ifdef CONFIG_DEBUG_SG - unsigned int i; - - for (i = 0; i < nents; i++) - sgl[i].sg_magic = SG_MAGIC; -#endif sg_mark_end(&sgl[nents - 1]); } diff --git a/include/linux/sched.h b/include/linux/sched.h index 87bf02d93a27..9256118bd40c 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1799,20 +1799,22 @@ static inline void rseq_set_notify_resume(struct task_struct *t) set_tsk_thread_flag(t, TIF_NOTIFY_RESUME); } -void __rseq_handle_notify_resume(struct pt_regs *regs); +void __rseq_handle_notify_resume(struct ksignal *sig, struct pt_regs *regs); -static inline void rseq_handle_notify_resume(struct pt_regs *regs) +static inline void rseq_handle_notify_resume(struct ksignal *ksig, + struct pt_regs *regs) { if (current->rseq) - __rseq_handle_notify_resume(regs); + __rseq_handle_notify_resume(ksig, regs); } -static inline void rseq_signal_deliver(struct pt_regs *regs) +static inline void rseq_signal_deliver(struct ksignal *ksig, + struct pt_regs *regs) { preempt_disable(); __set_bit(RSEQ_EVENT_SIGNAL_BIT, ¤t->rseq_event_mask); preempt_enable(); - rseq_handle_notify_resume(regs); + rseq_handle_notify_resume(ksig, regs); } /* rseq_preempt() requires preemption to be disabled. */ @@ -1831,9 +1833,7 @@ static inline void rseq_migrate(struct task_struct *t) /* * If parent process has a registered restartable sequences area, the - * child inherits. Only applies when forking a process, not a thread. In - * case a parent fork() in the middle of a restartable sequence, set the - * resume notifier to force the child to retry. + * child inherits. Only applies when forking a process, not a thread. */ static inline void rseq_fork(struct task_struct *t, unsigned long clone_flags) { @@ -1847,7 +1847,6 @@ static inline void rseq_fork(struct task_struct *t, unsigned long clone_flags) t->rseq_len = current->rseq_len; t->rseq_sig = current->rseq_sig; t->rseq_event_mask = current->rseq_event_mask; - rseq_preempt(t); } } @@ -1864,10 +1863,12 @@ static inline void rseq_execve(struct task_struct *t) static inline void rseq_set_notify_resume(struct task_struct *t) { } -static inline void rseq_handle_notify_resume(struct pt_regs *regs) +static inline void rseq_handle_notify_resume(struct ksignal *ksig, + struct pt_regs *regs) { } -static inline void rseq_signal_deliver(struct pt_regs *regs) +static inline void rseq_signal_deliver(struct ksignal *ksig, + struct pt_regs *regs) { } static inline void rseq_preempt(struct task_struct *t) diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index c86885954994..164cdedf6012 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -3252,7 +3252,8 @@ struct sk_buff *__skb_recv_datagram(struct sock *sk, unsigned flags, int *peeked, int *off, int *err); struct sk_buff *skb_recv_datagram(struct sock *sk, unsigned flags, int noblock, int *err); -__poll_t datagram_poll_mask(struct socket *sock, __poll_t events); +__poll_t datagram_poll(struct file *file, struct socket *sock, + struct poll_table_struct *wait); int skb_copy_datagram_iter(const struct sk_buff *from, int offset, struct iov_iter *to, int size); static inline int skb_copy_datagram_msg(const struct sk_buff *from, int offset, diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h index 09fa2c6f0e68..3a1a1dbc6f49 100644 --- a/include/linux/slub_def.h +++ b/include/linux/slub_def.h @@ -155,8 +155,12 @@ struct kmem_cache { #ifdef CONFIG_SYSFS #define SLAB_SUPPORTS_SYSFS +void sysfs_slab_unlink(struct kmem_cache *); void sysfs_slab_release(struct kmem_cache *); #else +static inline void sysfs_slab_unlink(struct kmem_cache *s) +{ +} static inline void sysfs_slab_release(struct kmem_cache *s) { } diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h index 1e8a46435838..fd57888d4942 100644 --- a/include/linux/spinlock.h +++ b/include/linux/spinlock.h @@ -427,6 +427,11 @@ extern int _atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock); #define atomic_dec_and_lock(atomic, lock) \ __cond_lock(lock, _atomic_dec_and_lock(atomic, lock)) +extern int _atomic_dec_and_lock_irqsave(atomic_t *atomic, spinlock_t *lock, + unsigned long *flags); +#define atomic_dec_and_lock_irqsave(atomic, lock, flags) \ + __cond_lock(lock, _atomic_dec_and_lock_irqsave(atomic, lock, &(flags))) + int alloc_bucket_spinlocks(spinlock_t **locks, unsigned int *lock_mask, size_t max_size, unsigned int cpu_mult, gfp_t gfp); diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 73810808cdf2..a368a68cb667 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -231,6 +231,9 @@ static inline int is_syscall_trace_event(struct trace_event_call *tp_event) */ #ifndef __SYSCALL_DEFINEx #define __SYSCALL_DEFINEx(x, name, ...) \ + __diag_push(); \ + __diag_ignore(GCC, 8, "-Wattribute-alias", \ + "Type aliasing is used to sanitize syscall arguments");\ asmlinkage long sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)) \ __attribute__((alias(__stringify(__se_sys##name)))); \ ALLOW_ERROR_INJECTION(sys##name, ERRNO); \ @@ -243,6 +246,7 @@ static inline int is_syscall_trace_event(struct trace_event_call *tp_event) __PROTECT(x, ret,__MAP(x,__SC_ARGS,__VA_ARGS__)); \ return ret; \ } \ + __diag_pop(); \ static inline long __do_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)) #endif /* __SYSCALL_DEFINEx */ diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h index 53ce8176c313..ec9d6bc65855 100644 --- a/include/net/bluetooth/bluetooth.h +++ b/include/net/bluetooth/bluetooth.h @@ -271,7 +271,7 @@ int bt_sock_recvmsg(struct socket *sock, struct msghdr *msg, size_t len, int flags); int bt_sock_stream_recvmsg(struct socket *sock, struct msghdr *msg, size_t len, int flags); -__poll_t bt_sock_poll_mask(struct socket *sock, __poll_t events); +__poll_t bt_sock_poll(struct file *file, struct socket *sock, poll_table *wait); int bt_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg); int bt_sock_wait_state(struct sock *sk, int state, unsigned long timeo); int bt_sock_wait_ready(struct sock *sk, unsigned long flags); diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h index 5cba71d2dc44..71b9043aa0e7 100644 --- a/include/net/ip6_fib.h +++ b/include/net/ip6_fib.h @@ -170,6 +170,7 @@ struct fib6_info { unused:3; struct fib6_nh fib6_nh; + struct rcu_head rcu; }; struct rt6_info { @@ -273,7 +274,7 @@ static inline void ip6_rt_put(struct rt6_info *rt) } struct fib6_info *fib6_info_alloc(gfp_t gfp_flags); -void fib6_info_destroy(struct fib6_info *f6i); +void fib6_info_destroy_rcu(struct rcu_head *head); static inline void fib6_info_hold(struct fib6_info *f6i) { @@ -283,7 +284,7 @@ static inline void fib6_info_hold(struct fib6_info *f6i) static inline void fib6_info_release(struct fib6_info *f6i) { if (f6i && atomic_dec_and_test(&f6i->fib6_ref)) - fib6_info_destroy(f6i); + call_rcu(&f6i->rcu, fib6_info_destroy_rcu); } enum fib6_walk_state { diff --git a/include/net/iucv/af_iucv.h b/include/net/iucv/af_iucv.h index b0eaeb02d46d..f4c21b5a1242 100644 --- a/include/net/iucv/af_iucv.h +++ b/include/net/iucv/af_iucv.h @@ -153,6 +153,8 @@ struct iucv_sock_list { atomic_t autobind_name; }; +__poll_t iucv_sock_poll(struct file *file, struct socket *sock, + poll_table *wait); void iucv_sock_link(struct iucv_sock_list *l, struct sock *s); void iucv_sock_unlink(struct iucv_sock_list *l, struct sock *s); void iucv_accept_enqueue(struct sock *parent, struct sock *sk); diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h index 30b3e2fe240a..8c2caa370e0f 100644 --- a/include/net/sctp/sctp.h +++ b/include/net/sctp/sctp.h @@ -109,7 +109,8 @@ int sctp_backlog_rcv(struct sock *sk, struct sk_buff *skb); int sctp_inet_listen(struct socket *sock, int backlog); void sctp_write_space(struct sock *sk); void sctp_data_ready(struct sock *sk); -__poll_t sctp_poll_mask(struct socket *sock, __poll_t events); +__poll_t sctp_poll(struct file *file, struct socket *sock, + poll_table *wait); void sctp_sock_rfree(struct sk_buff *skb); void sctp_copy_sock(struct sock *newsk, struct sock *sk, struct sctp_association *asoc); diff --git a/include/net/tcp.h b/include/net/tcp.h index 0448e7c5d2b4..800582b5dd54 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -388,7 +388,8 @@ bool tcp_peer_is_proven(struct request_sock *req, struct dst_entry *dst); void tcp_close(struct sock *sk, long timeout); void tcp_init_sock(struct sock *sk); void tcp_init_transfer(struct sock *sk, int bpf_op); -__poll_t tcp_poll_mask(struct socket *sock, __poll_t events); +__poll_t tcp_poll(struct file *file, struct socket *sock, + struct poll_table_struct *wait); int tcp_getsockopt(struct sock *sk, int level, int optname, char __user *optval, int __user *optlen); int tcp_setsockopt(struct sock *sk, int level, int optname, diff --git a/include/net/tls.h b/include/net/tls.h index 7f84ea3e217c..70c273777fe9 100644 --- a/include/net/tls.h +++ b/include/net/tls.h @@ -109,7 +109,8 @@ struct tls_sw_context_rx { struct strparser strp; void (*saved_data_ready)(struct sock *sk); - __poll_t (*sk_poll_mask)(struct socket *sock, __poll_t events); + unsigned int (*sk_poll)(struct file *file, struct socket *sock, + struct poll_table_struct *wait); struct sk_buff *recv_pkt; u8 control; bool decrypted; @@ -224,7 +225,8 @@ void tls_sw_free_resources_tx(struct sock *sk); void tls_sw_free_resources_rx(struct sock *sk); int tls_sw_recvmsg(struct sock *sk, struct msghdr *msg, size_t len, int nonblock, int flags, int *addr_len); -__poll_t tls_sw_poll_mask(struct socket *sock, __poll_t events); +unsigned int tls_sw_poll(struct file *file, struct socket *sock, + struct poll_table_struct *wait); ssize_t tls_sw_splice_read(struct socket *sock, loff_t *ppos, struct pipe_inode_info *pipe, size_t len, unsigned int flags); diff --git a/include/net/udp.h b/include/net/udp.h index b1ea8b0f5e6a..81afdacd4fff 100644 --- a/include/net/udp.h +++ b/include/net/udp.h @@ -285,7 +285,7 @@ int udp_init_sock(struct sock *sk); int udp_pre_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len); int __udp_disconnect(struct sock *sk, int flags); int udp_disconnect(struct sock *sk, int flags); -__poll_t udp_poll_mask(struct socket *sock, __poll_t events); +__poll_t udp_poll(struct file *file, struct socket *sock, poll_table *wait); struct sk_buff *skb_udp_tunnel_segment(struct sk_buff *skb, netdev_features_t features, bool is_ipv6); diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h index 4c6241bc2039..6c003995347a 100644 --- a/include/rdma/ib_verbs.h +++ b/include/rdma/ib_verbs.h @@ -3391,11 +3391,14 @@ int ib_process_cq_direct(struct ib_cq *cq, int budget); * * Users can examine the cq structure to determine the actual CQ size. */ -struct ib_cq *ib_create_cq(struct ib_device *device, - ib_comp_handler comp_handler, - void (*event_handler)(struct ib_event *, void *), - void *cq_context, - const struct ib_cq_init_attr *cq_attr); +struct ib_cq *__ib_create_cq(struct ib_device *device, + ib_comp_handler comp_handler, + void (*event_handler)(struct ib_event *, void *), + void *cq_context, + const struct ib_cq_init_attr *cq_attr, + const char *caller); +#define ib_create_cq(device, cmp_hndlr, evt_hndlr, cq_ctxt, cq_attr) \ + __ib_create_cq((device), (cmp_hndlr), (evt_hndlr), (cq_ctxt), (cq_attr), KBUILD_MODNAME) /** * ib_resize_cq - Modifies the capacity of the CQ. diff --git a/include/uapi/linux/aio_abi.h b/include/uapi/linux/aio_abi.h index d00221345c19..3c5038b587ba 100644 --- a/include/uapi/linux/aio_abi.h +++ b/include/uapi/linux/aio_abi.h @@ -39,8 +39,10 @@ enum { IOCB_CMD_PWRITE = 1, IOCB_CMD_FSYNC = 2, IOCB_CMD_FDSYNC = 3, - /* 4 was the experimental IOCB_CMD_PREADX */ - IOCB_CMD_POLL = 5, + /* These two are experimental. + * IOCB_CMD_PREADX = 4, + * IOCB_CMD_POLL = 5, + */ IOCB_CMD_NOOP = 6, IOCB_CMD_PREADV = 7, IOCB_CMD_PWRITEV = 8, diff --git a/include/uapi/linux/nbd.h b/include/uapi/linux/nbd.h index 85a3fb65e40a..20d6cc91435d 100644 --- a/include/uapi/linux/nbd.h +++ b/include/uapi/linux/nbd.h @@ -53,6 +53,9 @@ enum { /* These are client behavior specific flags. */ #define NBD_CFLAG_DESTROY_ON_DISCONNECT (1 << 0) /* delete the nbd device on disconnect. */ +#define NBD_CFLAG_DISCONNECT_ON_CLOSE (1 << 1) /* disconnect the nbd device on + * close by last opener. + */ /* userspace doesn't need the nbd_device structure */ diff --git a/include/uapi/linux/target_core_user.h b/include/uapi/linux/target_core_user.h index 6e299349b158..b7b57967d90f 100644 --- a/include/uapi/linux/target_core_user.h +++ b/include/uapi/linux/target_core_user.h @@ -44,6 +44,7 @@ #define TCMU_MAILBOX_VERSION 2 #define ALIGN_SIZE 64 /* Should be enough for most CPUs */ #define TCMU_MAILBOX_FLAG_CAP_OOOC (1 << 0) /* Out-of-order completions */ +#define TCMU_MAILBOX_FLAG_CAP_READ_LEN (1 << 1) /* Read data length */ struct tcmu_mailbox { __u16 version; @@ -71,6 +72,7 @@ struct tcmu_cmd_entry_hdr { __u16 cmd_id; __u8 kflags; #define TCMU_UFLAG_UNKNOWN_OP 0x1 +#define TCMU_UFLAG_READ_LEN 0x2 __u8 uflags; } __packed; @@ -119,7 +121,7 @@ struct tcmu_cmd_entry { __u8 scsi_status; __u8 __pad1; __u16 __pad2; - __u32 __pad3; + __u32 read_len; char sense_buffer[TCMU_SENSE_BUFFERSIZE]; } rsp; }; diff --git a/include/xen/xen.h b/include/xen/xen.h index 9d4340c907d1..1e1d9bd0bd37 100644 --- a/include/xen/xen.h +++ b/include/xen/xen.h @@ -25,12 +25,16 @@ extern bool xen_pvh; #define xen_hvm_domain() (xen_domain_type == XEN_HVM_DOMAIN) #define xen_pvh_domain() (xen_pvh) +#include <linux/types.h> + +extern uint32_t xen_start_flags; + #ifdef CONFIG_XEN_DOM0 #include <xen/interface/xen.h> #include <asm/xen/hypervisor.h> #define xen_initial_domain() (xen_domain() && \ - xen_start_info && xen_start_info->flags & SIF_INITDOMAIN) + (xen_start_flags & SIF_INITDOMAIN)) #else /* !CONFIG_XEN_DOM0 */ #define xen_initial_domain() (0) #endif /* CONFIG_XEN_DOM0 */ diff --git a/init/Kconfig b/init/Kconfig index 5a52f07259a2..041f3a022122 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -1051,10 +1051,9 @@ config LD_DEAD_CODE_DATA_ELIMINATION depends on HAVE_LD_DEAD_CODE_DATA_ELIMINATION depends on EXPERT help - Select this if the architecture wants to do dead code and - data elimination with the linker by compiling with - -ffunction-sections -fdata-sections, and linking with - --gc-sections. + Enable this if you want to do dead code and data elimination with + the linker by compiling with -ffunction-sections -fdata-sections, + and linking with --gc-sections. This can reduce on disk and in-memory size of the kernel code and static data, particularly for small configs and @@ -1719,10 +1718,6 @@ source "arch/Kconfig" endmenu # General setup -config HAVE_GENERIC_DMA_COHERENT - bool - default n - config RT_MUTEXES bool diff --git a/kernel/Makefile b/kernel/Makefile index d2001624fe7a..04bc07c2b42a 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -41,6 +41,7 @@ obj-y += printk/ obj-y += irq/ obj-y += rcu/ obj-y += livepatch/ +obj-y += dma/ obj-$(CONFIG_CHECKPOINT_RESTORE) += kcmp.o obj-$(CONFIG_FREEZER) += freezer.o diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c index 9f1493705f40..a9e6c04d0f4a 100644 --- a/kernel/bpf/core.c +++ b/kernel/bpf/core.c @@ -350,6 +350,20 @@ struct bpf_prog *bpf_patch_insn_single(struct bpf_prog *prog, u32 off, return prog_adj; } +void bpf_prog_kallsyms_del_subprogs(struct bpf_prog *fp) +{ + int i; + + for (i = 0; i < fp->aux->func_cnt; i++) + bpf_prog_kallsyms_del(fp->aux->func[i]); +} + +void bpf_prog_kallsyms_del_all(struct bpf_prog *fp) +{ + bpf_prog_kallsyms_del_subprogs(fp); + bpf_prog_kallsyms_del(fp); +} + #ifdef CONFIG_BPF_JIT /* All BPF JIT sysctl knobs here. */ int bpf_jit_enable __read_mostly = IS_BUILTIN(CONFIG_BPF_JIT_ALWAYS_ON); @@ -584,6 +598,8 @@ bpf_jit_binary_alloc(unsigned int proglen, u8 **image_ptr, bpf_fill_ill_insns(hdr, size); hdr->pages = size / PAGE_SIZE; + hdr->locked = 0; + hole = min_t(unsigned int, size - (proglen + sizeof(*hdr)), PAGE_SIZE - sizeof(*hdr)); start = (get_random_int() % hole) & ~(alignment - 1); @@ -1434,6 +1450,33 @@ static int bpf_check_tail_call(const struct bpf_prog *fp) return 0; } +static int bpf_prog_check_pages_ro_locked(const struct bpf_prog *fp) +{ +#ifdef CONFIG_ARCH_HAS_SET_MEMORY + int i, err; + + for (i = 0; i < fp->aux->func_cnt; i++) { + err = bpf_prog_check_pages_ro_single(fp->aux->func[i]); + if (err) + return err; + } + + return bpf_prog_check_pages_ro_single(fp); +#endif + return 0; +} + +static void bpf_prog_select_func(struct bpf_prog *fp) +{ +#ifndef CONFIG_BPF_JIT_ALWAYS_ON + u32 stack_depth = max_t(u32, fp->aux->stack_depth, 1); + + fp->bpf_func = interpreters[(round_up(stack_depth, 32) / 32) - 1]; +#else + fp->bpf_func = __bpf_prog_ret0_warn; +#endif +} + /** * bpf_prog_select_runtime - select exec runtime for BPF program * @fp: bpf_prog populated with internal BPF program @@ -1444,13 +1487,13 @@ static int bpf_check_tail_call(const struct bpf_prog *fp) */ struct bpf_prog *bpf_prog_select_runtime(struct bpf_prog *fp, int *err) { -#ifndef CONFIG_BPF_JIT_ALWAYS_ON - u32 stack_depth = max_t(u32, fp->aux->stack_depth, 1); + /* In case of BPF to BPF calls, verifier did all the prep + * work with regards to JITing, etc. + */ + if (fp->bpf_func) + goto finalize; - fp->bpf_func = interpreters[(round_up(stack_depth, 32) / 32) - 1]; -#else - fp->bpf_func = __bpf_prog_ret0_warn; -#endif + bpf_prog_select_func(fp); /* eBPF JITs can rewrite the program in case constant * blinding is active. However, in case of error during @@ -1471,6 +1514,8 @@ struct bpf_prog *bpf_prog_select_runtime(struct bpf_prog *fp, int *err) if (*err) return fp; } + +finalize: bpf_prog_lock_ro(fp); /* The tail call compatibility check can only be done at @@ -1479,7 +1524,17 @@ struct bpf_prog *bpf_prog_select_runtime(struct bpf_prog *fp, int *err) * all eBPF JITs might immediately support all features. */ *err = bpf_check_tail_call(fp); - + if (*err) + return fp; + + /* Checkpoint: at this point onwards any cBPF -> eBPF or + * native eBPF program is read-only. If we failed to change + * the page attributes (e.g. allocation failure from + * splitting large pages), then reject the whole program + * in order to guarantee not ending up with any W+X pages + * from BPF side in kernel. + */ + *err = bpf_prog_check_pages_ro_locked(fp); return fp; } EXPORT_SYMBOL_GPL(bpf_prog_select_runtime); diff --git a/kernel/bpf/devmap.c b/kernel/bpf/devmap.c index a7cc7b3494a9..642c97f6d1b8 100644 --- a/kernel/bpf/devmap.c +++ b/kernel/bpf/devmap.c @@ -345,6 +345,20 @@ int dev_map_enqueue(struct bpf_dtab_netdev *dst, struct xdp_buff *xdp, return bq_enqueue(dst, xdpf, dev_rx); } +int dev_map_generic_redirect(struct bpf_dtab_netdev *dst, struct sk_buff *skb, + struct bpf_prog *xdp_prog) +{ + int err; + + err = __xdp_generic_ok_fwd_dev(skb, dst->dev); + if (unlikely(err)) + return err; + skb->dev = dst->dev; + generic_xdp_tx(skb, xdp_prog); + + return 0; +} + static void *dev_map_lookup_elem(struct bpf_map *map, void *key) { struct bpf_dtab_netdev *obj = __dev_map_lookup_elem(map, *(u32 *)key); diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c index 0fa20624707f..35dc466641f2 100644 --- a/kernel/bpf/syscall.c +++ b/kernel/bpf/syscall.c @@ -1034,14 +1034,9 @@ static void __bpf_prog_put_rcu(struct rcu_head *rcu) static void __bpf_prog_put(struct bpf_prog *prog, bool do_idr_lock) { if (atomic_dec_and_test(&prog->aux->refcnt)) { - int i; - /* bpf_prog_free_id() must be called first */ bpf_prog_free_id(prog, do_idr_lock); - - for (i = 0; i < prog->aux->func_cnt; i++) - bpf_prog_kallsyms_del(prog->aux->func[i]); - bpf_prog_kallsyms_del(prog); + bpf_prog_kallsyms_del_all(prog); call_rcu(&prog->aux->rcu, __bpf_prog_put_rcu); } @@ -1358,9 +1353,7 @@ static int bpf_prog_load(union bpf_attr *attr) if (err < 0) goto free_used_maps; - /* eBPF program is ready to be JITed */ - if (!prog->bpf_func) - prog = bpf_prog_select_runtime(prog, &err); + prog = bpf_prog_select_runtime(prog, &err); if (err < 0) goto free_used_maps; @@ -1384,6 +1377,7 @@ static int bpf_prog_load(union bpf_attr *attr) return err; free_used_maps: + bpf_prog_kallsyms_del_subprogs(prog); free_used_maps(prog->aux); free_prog: bpf_prog_uncharge_memlock(prog); diff --git a/kernel/dma/Kconfig b/kernel/dma/Kconfig new file mode 100644 index 000000000000..9bd54304446f --- /dev/null +++ b/kernel/dma/Kconfig @@ -0,0 +1,50 @@ + +config HAS_DMA + bool + depends on !NO_DMA + default y + +config NEED_SG_DMA_LENGTH + bool + +config NEED_DMA_MAP_STATE + bool + +config ARCH_DMA_ADDR_T_64BIT + def_bool 64BIT || PHYS_ADDR_T_64BIT + +config HAVE_GENERIC_DMA_COHERENT + bool + +config ARCH_HAS_SYNC_DMA_FOR_DEVICE + bool + +config ARCH_HAS_SYNC_DMA_FOR_CPU + bool + select NEED_DMA_MAP_STATE + +config DMA_DIRECT_OPS + bool + depends on HAS_DMA + +config DMA_NONCOHERENT_OPS + bool + depends on HAS_DMA + select DMA_DIRECT_OPS + +config DMA_NONCOHERENT_MMAP + bool + depends on DMA_NONCOHERENT_OPS + +config DMA_NONCOHERENT_CACHE_SYNC + bool + depends on DMA_NONCOHERENT_OPS + +config DMA_VIRT_OPS + bool + depends on HAS_DMA + +config SWIOTLB + bool + select DMA_DIRECT_OPS + select NEED_DMA_MAP_STATE diff --git a/kernel/dma/Makefile b/kernel/dma/Makefile new file mode 100644 index 000000000000..6de44e4eb454 --- /dev/null +++ b/kernel/dma/Makefile @@ -0,0 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-$(CONFIG_HAS_DMA) += mapping.o +obj-$(CONFIG_DMA_CMA) += contiguous.o +obj-$(CONFIG_HAVE_GENERIC_DMA_COHERENT) += coherent.o +obj-$(CONFIG_DMA_DIRECT_OPS) += direct.o +obj-$(CONFIG_DMA_NONCOHERENT_OPS) += noncoherent.o +obj-$(CONFIG_DMA_VIRT_OPS) += virt.o +obj-$(CONFIG_DMA_API_DEBUG) += debug.o +obj-$(CONFIG_SWIOTLB) += swiotlb.o + diff --git a/drivers/base/dma-coherent.c b/kernel/dma/coherent.c index 597d40893862..597d40893862 100644 --- a/drivers/base/dma-coherent.c +++ b/kernel/dma/coherent.c diff --git a/drivers/base/dma-contiguous.c b/kernel/dma/contiguous.c index d987dcd1bd56..d987dcd1bd56 100644 --- a/drivers/base/dma-contiguous.c +++ b/kernel/dma/contiguous.c diff --git a/lib/dma-debug.c b/kernel/dma/debug.c index c007d25bee09..c007d25bee09 100644 --- a/lib/dma-debug.c +++ b/kernel/dma/debug.c diff --git a/lib/dma-direct.c b/kernel/dma/direct.c index 8be8106270c2..8be8106270c2 100644 --- a/lib/dma-direct.c +++ b/kernel/dma/direct.c diff --git a/drivers/base/dma-mapping.c b/kernel/dma/mapping.c index f831a582209c..d2a92ddaac4d 100644 --- a/drivers/base/dma-mapping.c +++ b/kernel/dma/mapping.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * drivers/base/dma-mapping.c - arch-independent dma-mapping routines + * arch-independent dma-mapping routines * * Copyright (c) 2006 SUSE Linux Products GmbH * Copyright (c) 2006 Tejun Heo <teheo@suse.de> diff --git a/lib/dma-noncoherent.c b/kernel/dma/noncoherent.c index 79e9a757387f..79e9a757387f 100644 --- a/lib/dma-noncoherent.c +++ b/kernel/dma/noncoherent.c diff --git a/lib/swiotlb.c b/kernel/dma/swiotlb.c index 04b68d9dffac..904541055792 100644 --- a/lib/swiotlb.c +++ b/kernel/dma/swiotlb.c @@ -1085,3 +1085,4 @@ const struct dma_map_ops swiotlb_dma_ops = { .unmap_page = swiotlb_unmap_page, .dma_supported = dma_direct_supported, }; +EXPORT_SYMBOL(swiotlb_dma_ops); diff --git a/lib/dma-virt.c b/kernel/dma/virt.c index 8e61a02ef9ca..631ddec4b60a 100644 --- a/lib/dma-virt.c +++ b/kernel/dma/virt.c @@ -1,7 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 /* - * lib/dma-virt.c - * * DMA operations that map to virtual addresses without flushing memory. */ #include <linux/export.h> diff --git a/kernel/events/core.c b/kernel/events/core.c index 80cca2b30c4f..8f0434a9951a 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -6482,7 +6482,7 @@ void perf_prepare_sample(struct perf_event_header *header, data->phys_addr = perf_virt_to_phys(data->addr); } -static void __always_inline +static __always_inline void __perf_event_output(struct perf_event *event, struct perf_sample_data *data, struct pt_regs *regs, diff --git a/kernel/events/ring_buffer.c b/kernel/events/ring_buffer.c index 045a37e9ddee..5d3cf407e374 100644 --- a/kernel/events/ring_buffer.c +++ b/kernel/events/ring_buffer.c @@ -103,7 +103,7 @@ out: preempt_enable(); } -static bool __always_inline +static __always_inline bool ring_buffer_has_space(unsigned long head, unsigned long tail, unsigned long data_size, unsigned int size, bool backward) @@ -114,7 +114,7 @@ ring_buffer_has_space(unsigned long head, unsigned long tail, return CIRC_SPACE(tail, head, data_size) >= size; } -static int __always_inline +static __always_inline int __perf_output_begin(struct perf_output_handle *handle, struct perf_event *event, unsigned int size, bool backward) @@ -414,7 +414,7 @@ err: } EXPORT_SYMBOL_GPL(perf_aux_output_begin); -static bool __always_inline rb_need_aux_wakeup(struct ring_buffer *rb) +static __always_inline bool rb_need_aux_wakeup(struct ring_buffer *rb) { if (rb->aux_overwrite) return false; diff --git a/kernel/irq/debugfs.c b/kernel/irq/debugfs.c index 4dadeb3d6666..6f636136cccc 100644 --- a/kernel/irq/debugfs.c +++ b/kernel/irq/debugfs.c @@ -55,6 +55,7 @@ static const struct irq_bit_descr irqchip_flags[] = { BIT_MASK_DESCR(IRQCHIP_SKIP_SET_WAKE), BIT_MASK_DESCR(IRQCHIP_ONESHOT_SAFE), BIT_MASK_DESCR(IRQCHIP_EOI_THREADED), + BIT_MASK_DESCR(IRQCHIP_SUPPORTS_LEVEL_MSI), }; static void diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c index edcac5de7ebc..5fa4d3138bf1 100644 --- a/kernel/locking/lockdep.c +++ b/kernel/locking/lockdep.c @@ -1265,11 +1265,11 @@ unsigned long lockdep_count_forward_deps(struct lock_class *class) this.parent = NULL; this.class = class; - local_irq_save(flags); + raw_local_irq_save(flags); arch_spin_lock(&lockdep_lock); ret = __lockdep_count_forward_deps(&this); arch_spin_unlock(&lockdep_lock); - local_irq_restore(flags); + raw_local_irq_restore(flags); return ret; } @@ -1292,11 +1292,11 @@ unsigned long lockdep_count_backward_deps(struct lock_class *class) this.parent = NULL; this.class = class; - local_irq_save(flags); + raw_local_irq_save(flags); arch_spin_lock(&lockdep_lock); ret = __lockdep_count_backward_deps(&this); arch_spin_unlock(&lockdep_lock); - local_irq_restore(flags); + raw_local_irq_restore(flags); return ret; } @@ -4411,7 +4411,7 @@ void debug_check_no_locks_freed(const void *mem_from, unsigned long mem_len) if (unlikely(!debug_locks)) return; - local_irq_save(flags); + raw_local_irq_save(flags); for (i = 0; i < curr->lockdep_depth; i++) { hlock = curr->held_locks + i; @@ -4422,7 +4422,7 @@ void debug_check_no_locks_freed(const void *mem_from, unsigned long mem_len) print_freed_lock_bug(curr, mem_from, mem_from + mem_len, hlock); break; } - local_irq_restore(flags); + raw_local_irq_restore(flags); } EXPORT_SYMBOL_GPL(debug_check_no_locks_freed); diff --git a/kernel/locking/rwsem.c b/kernel/locking/rwsem.c index bc1e507be9ff..776308d2fa9e 100644 --- a/kernel/locking/rwsem.c +++ b/kernel/locking/rwsem.c @@ -181,6 +181,7 @@ void down_read_non_owner(struct rw_semaphore *sem) might_sleep(); __down_read(sem); + rwsem_set_reader_owned(sem); } EXPORT_SYMBOL(down_read_non_owner); diff --git a/kernel/rseq.c b/kernel/rseq.c index ae306f90c514..22b6acf1ad63 100644 --- a/kernel/rseq.c +++ b/kernel/rseq.c @@ -251,10 +251,10 @@ static int rseq_ip_fixup(struct pt_regs *regs) * respect to other threads scheduled on the same CPU, and with respect * to signal handlers. */ -void __rseq_handle_notify_resume(struct pt_regs *regs) +void __rseq_handle_notify_resume(struct ksignal *ksig, struct pt_regs *regs) { struct task_struct *t = current; - int ret; + int ret, sig; if (unlikely(t->flags & PF_EXITING)) return; @@ -268,7 +268,8 @@ void __rseq_handle_notify_resume(struct pt_regs *regs) return; error: - force_sig(SIGSEGV, t); + sig = ksig ? ksig->sig : 0; + force_sigsegv(sig, t); } #ifdef CONFIG_DEBUG_RSEQ diff --git a/kernel/softirq.c b/kernel/softirq.c index de2f57fddc04..900dcfee542c 100644 --- a/kernel/softirq.c +++ b/kernel/softirq.c @@ -139,9 +139,13 @@ static void __local_bh_enable(unsigned int cnt) { lockdep_assert_irqs_disabled(); + if (preempt_count() == cnt) + trace_preempt_on(CALLER_ADDR0, get_lock_parent_ip()); + if (softirq_count() == (cnt & SOFTIRQ_MASK)) trace_softirqs_on(_RET_IP_); - preempt_count_sub(cnt); + + __preempt_count_sub(cnt); } /* diff --git a/kernel/time/hrtimer.c b/kernel/time/hrtimer.c index 055a4a728c00..3e93c54bd3a1 100644 --- a/kernel/time/hrtimer.c +++ b/kernel/time/hrtimer.c @@ -1659,7 +1659,7 @@ EXPORT_SYMBOL_GPL(hrtimer_init_sleeper); int nanosleep_copyout(struct restart_block *restart, struct timespec64 *ts) { switch(restart->nanosleep.type) { -#ifdef CONFIG_COMPAT +#ifdef CONFIG_COMPAT_32BIT_TIME case TT_COMPAT: if (compat_put_timespec64(ts, restart->nanosleep.compat_rmtp)) return -EFAULT; diff --git a/kernel/time/posix-cpu-timers.c b/kernel/time/posix-cpu-timers.c index 5a6251ac6f7a..9cdf54b04ca8 100644 --- a/kernel/time/posix-cpu-timers.c +++ b/kernel/time/posix-cpu-timers.c @@ -604,7 +604,6 @@ static int posix_cpu_timer_set(struct k_itimer *timer, int timer_flags, /* * Disarm any old timer after extracting its expiry time. */ - lockdep_assert_irqs_disabled(); ret = 0; old_incr = timer->it.cpu.incr; @@ -1049,7 +1048,6 @@ static void posix_cpu_timer_rearm(struct k_itimer *timer) /* * Now re-arm for the new expiry time. */ - lockdep_assert_irqs_disabled(); arm_timer(timer); unlock: unlock_task_sighand(p, &flags); diff --git a/kernel/time/time.c b/kernel/time/time.c index 6fa99213fc72..2b41e8e2d31d 100644 --- a/kernel/time/time.c +++ b/kernel/time/time.c @@ -28,6 +28,7 @@ */ #include <linux/export.h> +#include <linux/kernel.h> #include <linux/timex.h> #include <linux/capability.h> #include <linux/timekeeper_internal.h> @@ -314,9 +315,10 @@ unsigned int jiffies_to_msecs(const unsigned long j) return (j + (HZ / MSEC_PER_SEC) - 1)/(HZ / MSEC_PER_SEC); #else # if BITS_PER_LONG == 32 - return (HZ_TO_MSEC_MUL32 * j) >> HZ_TO_MSEC_SHR32; + return (HZ_TO_MSEC_MUL32 * j + (1ULL << HZ_TO_MSEC_SHR32) - 1) >> + HZ_TO_MSEC_SHR32; # else - return (j * HZ_TO_MSEC_NUM) / HZ_TO_MSEC_DEN; + return DIV_ROUND_UP(j * HZ_TO_MSEC_NUM, HZ_TO_MSEC_DEN); # endif #endif } diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index c9336e98ac59..a0079b4c7a49 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -1360,8 +1360,6 @@ __update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu) void update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu) { - struct ring_buffer *buf; - if (tr->stop_count) return; @@ -1375,9 +1373,7 @@ update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu) arch_spin_lock(&tr->max_lock); - buf = tr->trace_buffer.buffer; - tr->trace_buffer.buffer = tr->max_buffer.buffer; - tr->max_buffer.buffer = buf; + swap(tr->trace_buffer.buffer, tr->max_buffer.buffer); __update_max_tr(tr, tsk, cpu); arch_spin_unlock(&tr->max_lock); diff --git a/kernel/trace/trace_events_filter.c b/kernel/trace/trace_events_filter.c index e1c818dbc0d7..0dceb77d1d42 100644 --- a/kernel/trace/trace_events_filter.c +++ b/kernel/trace/trace_events_filter.c @@ -78,7 +78,8 @@ static const char * ops[] = { OPS }; C(TOO_MANY_PREDS, "Too many terms in predicate expression"), \ C(INVALID_FILTER, "Meaningless filter expression"), \ C(IP_FIELD_ONLY, "Only 'ip' field is supported for function trace"), \ - C(INVALID_VALUE, "Invalid value (did you forget quotes)?"), + C(INVALID_VALUE, "Invalid value (did you forget quotes)?"), \ + C(NO_FILTER, "No filter found"), #undef C #define C(a, b) FILT_ERR_##a @@ -550,6 +551,13 @@ predicate_parse(const char *str, int nr_parens, int nr_preds, goto out_free; } + if (!N) { + /* No program? */ + ret = -EINVAL; + parse_error(pe, FILT_ERR_NO_FILTER, ptr - str); + goto out_free; + } + prog[N].pred = NULL; /* #13 */ prog[N].target = 1; /* TRUE */ prog[N+1].pred = NULL; diff --git a/lib/Kconfig b/lib/Kconfig index e34b04b56057..706836ec314d 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -420,60 +420,15 @@ config HAS_IOPORT_MAP depends on HAS_IOMEM && !NO_IOPORT_MAP default y -config HAS_DMA - bool - depends on !NO_DMA - default y +source "kernel/dma/Kconfig" config SGL_ALLOC bool default n -config NEED_SG_DMA_LENGTH - bool - -config NEED_DMA_MAP_STATE - bool - -config ARCH_DMA_ADDR_T_64BIT - def_bool 64BIT || PHYS_ADDR_T_64BIT - config IOMMU_HELPER bool -config ARCH_HAS_SYNC_DMA_FOR_DEVICE - bool - -config ARCH_HAS_SYNC_DMA_FOR_CPU - bool - select NEED_DMA_MAP_STATE - -config DMA_DIRECT_OPS - bool - depends on HAS_DMA - -config DMA_NONCOHERENT_OPS - bool - depends on HAS_DMA - select DMA_DIRECT_OPS - -config DMA_NONCOHERENT_MMAP - bool - depends on DMA_NONCOHERENT_OPS - -config DMA_NONCOHERENT_CACHE_SYNC - bool - depends on DMA_NONCOHERENT_OPS - -config DMA_VIRT_OPS - bool - depends on HAS_DMA - -config SWIOTLB - bool - select DMA_DIRECT_OPS - select NEED_DMA_MAP_STATE - config CHECK_SIGNATURE bool diff --git a/lib/Kconfig.kasan b/lib/Kconfig.kasan index 3d35d062970d..c253c1b46c6b 100644 --- a/lib/Kconfig.kasan +++ b/lib/Kconfig.kasan @@ -6,6 +6,7 @@ if HAVE_ARCH_KASAN config KASAN bool "KASan: runtime memory debugger" depends on SLUB || (SLAB && !DEBUG_SLAB) + select SLUB_DEBUG if SLUB select CONSTRUCTORS select STACKDEPOT help diff --git a/lib/Makefile b/lib/Makefile index 956b320292fe..90dc5520b784 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -23,15 +23,12 @@ lib-y := ctype.o string.o vsprintf.o cmdline.o \ sha1.o chacha20.o irq_regs.o argv_split.o \ flex_proportions.o ratelimit.o show_mem.o \ is_single_threaded.o plist.o decompress.o kobject_uevent.o \ - earlycpio.o seq_buf.o siphash.o \ + earlycpio.o seq_buf.o siphash.o dec_and_lock.o \ nmi_backtrace.o nodemask.o win_minmax.o lib-$(CONFIG_PRINTK) += dump_stack.o lib-$(CONFIG_MMU) += ioremap.o lib-$(CONFIG_SMP) += cpumask.o -lib-$(CONFIG_DMA_DIRECT_OPS) += dma-direct.o -lib-$(CONFIG_DMA_NONCOHERENT_OPS) += dma-noncoherent.o -lib-$(CONFIG_DMA_VIRT_OPS) += dma-virt.o lib-y += kobject.o klist.o obj-y += lockref.o @@ -98,10 +95,6 @@ obj-$(CONFIG_DEBUG_PREEMPT) += smp_processor_id.o obj-$(CONFIG_DEBUG_LIST) += list_debug.o obj-$(CONFIG_DEBUG_OBJECTS) += debugobjects.o -ifneq ($(CONFIG_HAVE_DEC_LOCK),y) - lib-y += dec_and_lock.o -endif - obj-$(CONFIG_BITREVERSE) += bitrev.o obj-$(CONFIG_RATIONAL) += rational.o obj-$(CONFIG_CRC_CCITT) += crc-ccitt.o @@ -148,7 +141,6 @@ obj-$(CONFIG_SMP) += percpu_counter.o obj-$(CONFIG_AUDIT_GENERIC) += audit.o obj-$(CONFIG_AUDIT_COMPAT_GENERIC) += compat_audit.o -obj-$(CONFIG_SWIOTLB) += swiotlb.o obj-$(CONFIG_IOMMU_HELPER) += iommu-helper.o obj-$(CONFIG_FAULT_INJECTION) += fault-inject.o obj-$(CONFIG_NOTIFIER_ERROR_INJECTION) += notifier-error-inject.o @@ -169,8 +161,6 @@ obj-$(CONFIG_NLATTR) += nlattr.o obj-$(CONFIG_LRU_CACHE) += lru_cache.o -obj-$(CONFIG_DMA_API_DEBUG) += dma-debug.o - obj-$(CONFIG_GENERIC_CSUM) += checksum.o obj-$(CONFIG_GENERIC_ATOMIC64) += atomic64.o diff --git a/lib/dec_and_lock.c b/lib/dec_and_lock.c index 347fa7ac2e8a..9555b68bb774 100644 --- a/lib/dec_and_lock.c +++ b/lib/dec_and_lock.c @@ -33,3 +33,19 @@ int _atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock) } EXPORT_SYMBOL(_atomic_dec_and_lock); + +int _atomic_dec_and_lock_irqsave(atomic_t *atomic, spinlock_t *lock, + unsigned long *flags) +{ + /* Subtract 1 from counter unless that drops it to 0 (ie. it was 1) */ + if (atomic_add_unless(atomic, -1, 1)) + return 0; + + /* Otherwise do it the slow way */ + spin_lock_irqsave(lock, *flags); + if (atomic_dec_and_test(atomic)) + return 1; + spin_unlock_irqrestore(lock, *flags); + return 0; +} +EXPORT_SYMBOL(_atomic_dec_and_lock_irqsave); diff --git a/lib/percpu_ida.c b/lib/percpu_ida.c index 9bbd9c5d375a..beb14839b41a 100644 --- a/lib/percpu_ida.c +++ b/lib/percpu_ida.c @@ -141,7 +141,7 @@ int percpu_ida_alloc(struct percpu_ida *pool, int state) spin_lock_irqsave(&tags->lock, flags); /* Fastpath */ - if (likely(tags->nr_free >= 0)) { + if (likely(tags->nr_free)) { tag = tags->freelist[--tags->nr_free]; spin_unlock_irqrestore(&tags->lock, flags); return tag; diff --git a/lib/refcount.c b/lib/refcount.c index 0eb48353abe3..d3b81cefce91 100644 --- a/lib/refcount.c +++ b/lib/refcount.c @@ -350,3 +350,31 @@ bool refcount_dec_and_lock(refcount_t *r, spinlock_t *lock) } EXPORT_SYMBOL(refcount_dec_and_lock); +/** + * refcount_dec_and_lock_irqsave - return holding spinlock with disabled + * interrupts if able to decrement refcount to 0 + * @r: the refcount + * @lock: the spinlock to be locked + * @flags: saved IRQ-flags if the is acquired + * + * Same as refcount_dec_and_lock() above except that the spinlock is acquired + * with disabled interupts. + * + * Return: true and hold spinlock if able to decrement refcount to 0, false + * otherwise + */ +bool refcount_dec_and_lock_irqsave(refcount_t *r, spinlock_t *lock, + unsigned long *flags) +{ + if (refcount_dec_not_one(r)) + return false; + + spin_lock_irqsave(lock, *flags); + if (!refcount_dec_and_test(r)) { + spin_unlock_irqrestore(lock, *flags); + return false; + } + + return true; +} +EXPORT_SYMBOL(refcount_dec_and_lock_irqsave); diff --git a/lib/scatterlist.c b/lib/scatterlist.c index 1642fd507a96..7c6096a71704 100644 --- a/lib/scatterlist.c +++ b/lib/scatterlist.c @@ -24,9 +24,6 @@ **/ struct scatterlist *sg_next(struct scatterlist *sg) { -#ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); -#endif if (sg_is_last(sg)) return NULL; @@ -111,10 +108,7 @@ struct scatterlist *sg_last(struct scatterlist *sgl, unsigned int nents) for_each_sg(sgl, sg, nents, i) ret = sg; -#ifdef CONFIG_DEBUG_SG - BUG_ON(sgl[0].sg_magic != SG_MAGIC); BUG_ON(!sg_is_last(ret)); -#endif return ret; } EXPORT_SYMBOL(sg_last); diff --git a/lib/test_printf.c b/lib/test_printf.c index b2aa8f514844..cea592f402ed 100644 --- a/lib/test_printf.c +++ b/lib/test_printf.c @@ -260,13 +260,6 @@ plain(void) { int err; - /* - * Make sure crng is ready. Otherwise we get "(ptrval)" instead - * of a hashed address when printing '%p' in plain_hash() and - * plain_format(). - */ - wait_for_random_bytes(); - err = plain_hash(); if (err) { pr_warn("plain 'p' does not appear to be hashed\n"); diff --git a/mm/backing-dev.c b/mm/backing-dev.c index 347cc834c04a..2e5d3df0853d 100644 --- a/mm/backing-dev.c +++ b/mm/backing-dev.c @@ -359,15 +359,8 @@ static void wb_shutdown(struct bdi_writeback *wb) spin_lock_bh(&wb->work_lock); if (!test_and_clear_bit(WB_registered, &wb->state)) { spin_unlock_bh(&wb->work_lock); - /* - * Wait for wb shutdown to finish if someone else is just - * running wb_shutdown(). Otherwise we could proceed to wb / - * bdi destruction before wb_shutdown() is finished. - */ - wait_on_bit(&wb->state, WB_shutting_down, TASK_UNINTERRUPTIBLE); return; } - set_bit(WB_shutting_down, &wb->state); spin_unlock_bh(&wb->work_lock); cgwb_remove_from_bdi_list(wb); @@ -379,12 +372,6 @@ static void wb_shutdown(struct bdi_writeback *wb) mod_delayed_work(bdi_wq, &wb->dwork, 0); flush_delayed_work(&wb->dwork); WARN_ON(!list_empty(&wb->work_list)); - /* - * Make sure bit gets cleared after shutdown is finished. Matches with - * the barrier provided by test_and_clear_bit() above. - */ - smp_wmb(); - clear_and_wake_up_bit(WB_shutting_down, &wb->state); } static void wb_exit(struct bdi_writeback *wb) @@ -508,10 +495,12 @@ static void cgwb_release_workfn(struct work_struct *work) struct bdi_writeback *wb = container_of(work, struct bdi_writeback, release_work); + mutex_lock(&wb->bdi->cgwb_release_mutex); wb_shutdown(wb); css_put(wb->memcg_css); css_put(wb->blkcg_css); + mutex_unlock(&wb->bdi->cgwb_release_mutex); fprop_local_destroy_percpu(&wb->memcg_completions); percpu_ref_exit(&wb->refcnt); @@ -697,6 +686,7 @@ static int cgwb_bdi_init(struct backing_dev_info *bdi) INIT_RADIX_TREE(&bdi->cgwb_tree, GFP_ATOMIC); bdi->cgwb_congested_tree = RB_ROOT; + mutex_init(&bdi->cgwb_release_mutex); ret = wb_init(&bdi->wb, bdi, 1, GFP_KERNEL); if (!ret) { @@ -717,7 +707,10 @@ static void cgwb_bdi_unregister(struct backing_dev_info *bdi) spin_lock_irq(&cgwb_lock); radix_tree_for_each_slot(slot, &bdi->cgwb_tree, &iter, 0) cgwb_kill(*slot); + spin_unlock_irq(&cgwb_lock); + mutex_lock(&bdi->cgwb_release_mutex); + spin_lock_irq(&cgwb_lock); while (!list_empty(&bdi->wb_list)) { wb = list_first_entry(&bdi->wb_list, struct bdi_writeback, bdi_node); @@ -726,6 +719,7 @@ static void cgwb_bdi_unregister(struct backing_dev_info *bdi) spin_lock_irq(&cgwb_lock); } spin_unlock_irq(&cgwb_lock); + mutex_unlock(&bdi->cgwb_release_mutex); } /** diff --git a/mm/memblock.c b/mm/memblock.c index cc16d70b8333..03d48d8835ba 100644 --- a/mm/memblock.c +++ b/mm/memblock.c @@ -20,7 +20,6 @@ #include <linux/kmemleak.h> #include <linux/seq_file.h> #include <linux/memblock.h> -#include <linux/bootmem.h> #include <asm/sections.h> #include <linux/io.h> diff --git a/mm/slab_common.c b/mm/slab_common.c index 890b1f04a03a..2296caf87bfb 100644 --- a/mm/slab_common.c +++ b/mm/slab_common.c @@ -567,10 +567,14 @@ static int shutdown_cache(struct kmem_cache *s) list_del(&s->list); if (s->flags & SLAB_TYPESAFE_BY_RCU) { +#ifdef SLAB_SUPPORTS_SYSFS + sysfs_slab_unlink(s); +#endif list_add_tail(&s->list, &slab_caches_to_rcu_destroy); schedule_work(&slab_caches_to_rcu_destroy_work); } else { #ifdef SLAB_SUPPORTS_SYSFS + sysfs_slab_unlink(s); sysfs_slab_release(s); #else slab_kmem_cache_release(s); diff --git a/mm/slub.c b/mm/slub.c index a3b8467c14af..51258eff4178 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -5667,7 +5667,6 @@ static void sysfs_slab_remove_workfn(struct work_struct *work) kset_unregister(s->memcg_kset); #endif kobject_uevent(&s->kobj, KOBJ_REMOVE); - kobject_del(&s->kobj); out: kobject_put(&s->kobj); } @@ -5752,6 +5751,12 @@ static void sysfs_slab_remove(struct kmem_cache *s) schedule_work(&s->kobj_remove_work); } +void sysfs_slab_unlink(struct kmem_cache *s) +{ + if (slab_state >= FULL) + kobject_del(&s->kobj); +} + void sysfs_slab_release(struct kmem_cache *s) { if (slab_state >= FULL) diff --git a/mm/vmstat.c b/mm/vmstat.c index 75eda9c2b260..8ba0870ecddd 100644 --- a/mm/vmstat.c +++ b/mm/vmstat.c @@ -1796,11 +1796,9 @@ static void vmstat_update(struct work_struct *w) * to occur in the future. Keep on running the * update worker thread. */ - preempt_disable(); queue_delayed_work_on(smp_processor_id(), mm_percpu_wq, this_cpu_ptr(&vmstat_work), round_jiffies_relative(sysctl_stat_interval)); - preempt_enable(); } } diff --git a/net/appletalk/ddp.c b/net/appletalk/ddp.c index 55fdba05d7d9..9b6bc5abe946 100644 --- a/net/appletalk/ddp.c +++ b/net/appletalk/ddp.c @@ -1869,7 +1869,7 @@ static const struct proto_ops atalk_dgram_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = atalk_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = atalk_ioctl, #ifdef CONFIG_COMPAT .compat_ioctl = atalk_compat_ioctl, diff --git a/net/atm/br2684.c b/net/atm/br2684.c index 36b3adacc0dd..10462de734ea 100644 --- a/net/atm/br2684.c +++ b/net/atm/br2684.c @@ -252,8 +252,7 @@ static int br2684_xmit_vcc(struct sk_buff *skb, struct net_device *dev, ATM_SKB(skb)->vcc = atmvcc = brvcc->atmvcc; pr_debug("atm_skb(%p)->vcc(%p)->dev(%p)\n", skb, atmvcc, atmvcc->dev); - refcount_add(skb->truesize, &sk_atm(atmvcc)->sk_wmem_alloc); - ATM_SKB(skb)->atm_options = atmvcc->atm_options; + atm_account_tx(atmvcc, skb); dev->stats.tx_packets++; dev->stats.tx_bytes += skb->len; diff --git a/net/atm/clip.c b/net/atm/clip.c index 66caa48a27c2..d795b9c5aea4 100644 --- a/net/atm/clip.c +++ b/net/atm/clip.c @@ -381,8 +381,7 @@ static netdev_tx_t clip_start_xmit(struct sk_buff *skb, memcpy(here, llc_oui, sizeof(llc_oui)); ((__be16 *) here)[3] = skb->protocol; } - refcount_add(skb->truesize, &sk_atm(vcc)->sk_wmem_alloc); - ATM_SKB(skb)->atm_options = vcc->atm_options; + atm_account_tx(vcc, skb); entry->vccs->last_use = jiffies; pr_debug("atm_skb(%p)->vcc(%p)->dev(%p)\n", skb, vcc, vcc->dev); old = xchg(&entry->vccs->xoff, 1); /* assume XOFF ... */ diff --git a/net/atm/common.c b/net/atm/common.c index 1f2af59935db..a7a68e509628 100644 --- a/net/atm/common.c +++ b/net/atm/common.c @@ -630,10 +630,9 @@ int vcc_sendmsg(struct socket *sock, struct msghdr *m, size_t size) goto out; } pr_debug("%d += %d\n", sk_wmem_alloc_get(sk), skb->truesize); - refcount_add(skb->truesize, &sk->sk_wmem_alloc); + atm_account_tx(vcc, skb); skb->dev = NULL; /* for paths shared with net_device interfaces */ - ATM_SKB(skb)->atm_options = vcc->atm_options; if (!copy_from_iter_full(skb_put(skb, size), size, &m->msg_iter)) { kfree_skb(skb); error = -EFAULT; @@ -648,11 +647,16 @@ out: return error; } -__poll_t vcc_poll_mask(struct socket *sock, __poll_t events) +__poll_t vcc_poll(struct file *file, struct socket *sock, poll_table *wait) { struct sock *sk = sock->sk; - struct atm_vcc *vcc = ATM_SD(sock); - __poll_t mask = 0; + struct atm_vcc *vcc; + __poll_t mask; + + sock_poll_wait(file, sk_sleep(sk), wait); + mask = 0; + + vcc = ATM_SD(sock); /* exceptional events */ if (sk->sk_err) diff --git a/net/atm/common.h b/net/atm/common.h index 526796ad230f..5850649068bb 100644 --- a/net/atm/common.h +++ b/net/atm/common.h @@ -17,7 +17,7 @@ int vcc_connect(struct socket *sock, int itf, short vpi, int vci); int vcc_recvmsg(struct socket *sock, struct msghdr *msg, size_t size, int flags); int vcc_sendmsg(struct socket *sock, struct msghdr *m, size_t total_len); -__poll_t vcc_poll_mask(struct socket *sock, __poll_t events); +__poll_t vcc_poll(struct file *file, struct socket *sock, poll_table *wait); int vcc_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg); int vcc_compat_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg); int vcc_setsockopt(struct socket *sock, int level, int optname, diff --git a/net/atm/lec.c b/net/atm/lec.c index 5a95fcf6f9b6..d7f5cf5b7594 100644 --- a/net/atm/lec.c +++ b/net/atm/lec.c @@ -182,9 +182,8 @@ lec_send(struct atm_vcc *vcc, struct sk_buff *skb) struct net_device *dev = skb->dev; ATM_SKB(skb)->vcc = vcc; - ATM_SKB(skb)->atm_options = vcc->atm_options; + atm_account_tx(vcc, skb); - refcount_add(skb->truesize, &sk_atm(vcc)->sk_wmem_alloc); if (vcc->send(vcc, skb) < 0) { dev->stats.tx_dropped++; return; diff --git a/net/atm/mpc.c b/net/atm/mpc.c index 75620c2f2617..24b53c4c39c6 100644 --- a/net/atm/mpc.c +++ b/net/atm/mpc.c @@ -555,8 +555,7 @@ static int send_via_shortcut(struct sk_buff *skb, struct mpoa_client *mpc) sizeof(struct llc_snap_hdr)); } - refcount_add(skb->truesize, &sk_atm(entry->shortcut)->sk_wmem_alloc); - ATM_SKB(skb)->atm_options = entry->shortcut->atm_options; + atm_account_tx(entry->shortcut, skb); entry->shortcut->send(entry->shortcut, skb); entry->packets_fwded++; mpc->in_ops->put(entry); diff --git a/net/atm/pppoatm.c b/net/atm/pppoatm.c index 21d9d341a619..af8c4b38b746 100644 --- a/net/atm/pppoatm.c +++ b/net/atm/pppoatm.c @@ -350,8 +350,7 @@ static int pppoatm_send(struct ppp_channel *chan, struct sk_buff *skb) return 1; } - refcount_add(skb->truesize, &sk_atm(ATM_SKB(skb)->vcc)->sk_wmem_alloc); - ATM_SKB(skb)->atm_options = ATM_SKB(skb)->vcc->atm_options; + atm_account_tx(vcc, skb); pr_debug("atm_skb(%p)->vcc(%p)->dev(%p)\n", skb, ATM_SKB(skb)->vcc, ATM_SKB(skb)->vcc->dev); ret = ATM_SKB(skb)->vcc->send(ATM_SKB(skb)->vcc, skb) diff --git a/net/atm/pvc.c b/net/atm/pvc.c index 9f75092fe778..2cb10af16afc 100644 --- a/net/atm/pvc.c +++ b/net/atm/pvc.c @@ -113,7 +113,7 @@ static const struct proto_ops pvc_proto_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = pvc_getname, - .poll_mask = vcc_poll_mask, + .poll = vcc_poll, .ioctl = vcc_ioctl, #ifdef CONFIG_COMPAT .compat_ioctl = vcc_compat_ioctl, diff --git a/net/atm/raw.c b/net/atm/raw.c index ee10e8d46185..b3ba44aab0ee 100644 --- a/net/atm/raw.c +++ b/net/atm/raw.c @@ -35,8 +35,8 @@ static void atm_pop_raw(struct atm_vcc *vcc, struct sk_buff *skb) struct sock *sk = sk_atm(vcc); pr_debug("(%d) %d -= %d\n", - vcc->vci, sk_wmem_alloc_get(sk), skb->truesize); - WARN_ON(refcount_sub_and_test(skb->truesize, &sk->sk_wmem_alloc)); + vcc->vci, sk_wmem_alloc_get(sk), ATM_SKB(skb)->acct_truesize); + WARN_ON(refcount_sub_and_test(ATM_SKB(skb)->acct_truesize, &sk->sk_wmem_alloc)); dev_kfree_skb_any(skb); sk->sk_write_space(sk); } diff --git a/net/atm/svc.c b/net/atm/svc.c index 53f4ad7087b1..2f91b766ac42 100644 --- a/net/atm/svc.c +++ b/net/atm/svc.c @@ -636,7 +636,7 @@ static const struct proto_ops svc_proto_ops = { .socketpair = sock_no_socketpair, .accept = svc_accept, .getname = svc_getname, - .poll_mask = vcc_poll_mask, + .poll = vcc_poll, .ioctl = svc_ioctl, #ifdef CONFIG_COMPAT .compat_ioctl = svc_compat_ioctl, diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c index d1d2442ce573..c603d33d5410 100644 --- a/net/ax25/af_ax25.c +++ b/net/ax25/af_ax25.c @@ -1941,7 +1941,7 @@ static const struct proto_ops ax25_proto_ops = { .socketpair = sock_no_socketpair, .accept = ax25_accept, .getname = ax25_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = ax25_ioctl, .listen = ax25_listen, .shutdown = ax25_shutdown, diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c index 510ab4f55df5..3264e1873219 100644 --- a/net/bluetooth/af_bluetooth.c +++ b/net/bluetooth/af_bluetooth.c @@ -437,13 +437,16 @@ static inline __poll_t bt_accept_poll(struct sock *parent) return 0; } -__poll_t bt_sock_poll_mask(struct socket *sock, __poll_t events) +__poll_t bt_sock_poll(struct file *file, struct socket *sock, + poll_table *wait) { struct sock *sk = sock->sk; __poll_t mask = 0; BT_DBG("sock %p, sk %p", sock, sk); + poll_wait(file, sk_sleep(sk), wait); + if (sk->sk_state == BT_LISTEN) return bt_accept_poll(sk); @@ -475,7 +478,7 @@ __poll_t bt_sock_poll_mask(struct socket *sock, __poll_t events) return mask; } -EXPORT_SYMBOL(bt_sock_poll_mask); +EXPORT_SYMBOL(bt_sock_poll); int bt_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg) { diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c index d6c099861538..1506e1632394 100644 --- a/net/bluetooth/hci_sock.c +++ b/net/bluetooth/hci_sock.c @@ -1975,7 +1975,7 @@ static const struct proto_ops hci_sock_ops = { .sendmsg = hci_sock_sendmsg, .recvmsg = hci_sock_recvmsg, .ioctl = hci_sock_ioctl, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .listen = sock_no_listen, .shutdown = sock_no_shutdown, .setsockopt = hci_sock_setsockopt, diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c index 742a190034e6..686bdc6b35b0 100644 --- a/net/bluetooth/l2cap_sock.c +++ b/net/bluetooth/l2cap_sock.c @@ -1653,7 +1653,7 @@ static const struct proto_ops l2cap_sock_ops = { .getname = l2cap_sock_getname, .sendmsg = l2cap_sock_sendmsg, .recvmsg = l2cap_sock_recvmsg, - .poll_mask = bt_sock_poll_mask, + .poll = bt_sock_poll, .ioctl = bt_sock_ioctl, .mmap = sock_no_mmap, .socketpair = sock_no_socketpair, diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c index 1cf57622473a..d606e9212291 100644 --- a/net/bluetooth/rfcomm/sock.c +++ b/net/bluetooth/rfcomm/sock.c @@ -1049,7 +1049,7 @@ static const struct proto_ops rfcomm_sock_ops = { .setsockopt = rfcomm_sock_setsockopt, .getsockopt = rfcomm_sock_getsockopt, .ioctl = rfcomm_sock_ioctl, - .poll_mask = bt_sock_poll_mask, + .poll = bt_sock_poll, .socketpair = sock_no_socketpair, .mmap = sock_no_mmap }; diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c index d60dbc61d170..413b8ee49fec 100644 --- a/net/bluetooth/sco.c +++ b/net/bluetooth/sco.c @@ -1197,7 +1197,7 @@ static const struct proto_ops sco_sock_ops = { .getname = sco_sock_getname, .sendmsg = sco_sock_sendmsg, .recvmsg = sco_sock_recvmsg, - .poll_mask = bt_sock_poll_mask, + .poll = bt_sock_poll, .ioctl = bt_sock_ioctl, .mmap = sock_no_mmap, .socketpair = sock_no_socketpair, diff --git a/net/bpfilter/.gitignore b/net/bpfilter/.gitignore new file mode 100644 index 000000000000..e97084e3eea2 --- /dev/null +++ b/net/bpfilter/.gitignore @@ -0,0 +1 @@ +bpfilter_umh diff --git a/net/bpfilter/Makefile b/net/bpfilter/Makefile index e0bbe7583e58..051dc18b8ccb 100644 --- a/net/bpfilter/Makefile +++ b/net/bpfilter/Makefile @@ -21,8 +21,10 @@ endif # which bpfilter_kern.c passes further into umh blob loader at run-time quiet_cmd_copy_umh = GEN $@ cmd_copy_umh = echo ':' > $(obj)/.bpfilter_umh.o.cmd; \ - $(OBJCOPY) -I binary -O `$(OBJDUMP) -f $<|grep format|cut -d' ' -f8` \ - -B `$(OBJDUMP) -f $<|grep architecture|cut -d, -f1|cut -d' ' -f2` \ + $(OBJCOPY) -I binary \ + `LC_ALL=C $(OBJDUMP) -f net/bpfilter/bpfilter_umh \ + |awk -F' |,' '/file format/{print "-O",$$NF} \ + /^architecture:/{print "-B",$$2}'` \ --rename-section .data=.init.rodata $< $@ $(obj)/bpfilter_umh.o: $(obj)/bpfilter_umh diff --git a/net/caif/caif_socket.c b/net/caif/caif_socket.c index c7991867d622..a6fb1b3bcad9 100644 --- a/net/caif/caif_socket.c +++ b/net/caif/caif_socket.c @@ -934,11 +934,15 @@ static int caif_release(struct socket *sock) } /* Copied from af_unix.c:unix_poll(), added CAIF tx_flow handling */ -static __poll_t caif_poll_mask(struct socket *sock, __poll_t events) +static __poll_t caif_poll(struct file *file, + struct socket *sock, poll_table *wait) { struct sock *sk = sock->sk; + __poll_t mask; struct caifsock *cf_sk = container_of(sk, struct caifsock, sk); - __poll_t mask = 0; + + sock_poll_wait(file, sk_sleep(sk), wait); + mask = 0; /* exceptional events? */ if (sk->sk_err) @@ -972,7 +976,7 @@ static const struct proto_ops caif_seqpacket_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = sock_no_getname, - .poll_mask = caif_poll_mask, + .poll = caif_poll, .ioctl = sock_no_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, @@ -993,7 +997,7 @@ static const struct proto_ops caif_stream_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = sock_no_getname, - .poll_mask = caif_poll_mask, + .poll = caif_poll, .ioctl = sock_no_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, diff --git a/net/can/bcm.c b/net/can/bcm.c index 9393f25df08d..0af8f0db892a 100644 --- a/net/can/bcm.c +++ b/net/can/bcm.c @@ -1660,7 +1660,7 @@ static const struct proto_ops bcm_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = sock_no_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = can_ioctl, /* use can_ioctl() from af_can.c */ .listen = sock_no_listen, .shutdown = sock_no_shutdown, diff --git a/net/can/raw.c b/net/can/raw.c index fd7e2f49ea6a..1051eee82581 100644 --- a/net/can/raw.c +++ b/net/can/raw.c @@ -843,7 +843,7 @@ static const struct proto_ops raw_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = raw_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = can_ioctl, /* use can_ioctl() from af_can.c */ .listen = sock_no_listen, .shutdown = sock_no_shutdown, diff --git a/net/core/datagram.c b/net/core/datagram.c index f19bf3dc2bd6..9938952c5c78 100644 --- a/net/core/datagram.c +++ b/net/core/datagram.c @@ -819,8 +819,9 @@ EXPORT_SYMBOL(skb_copy_and_csum_datagram_msg); /** * datagram_poll - generic datagram poll + * @file: file struct * @sock: socket - * @events to wait for + * @wait: poll table * * Datagram poll: Again totally generic. This also handles * sequenced packet sockets providing the socket receive queue @@ -830,10 +831,14 @@ EXPORT_SYMBOL(skb_copy_and_csum_datagram_msg); * and you use a different write policy from sock_writeable() * then please supply your own write_space callback. */ -__poll_t datagram_poll_mask(struct socket *sock, __poll_t events) +__poll_t datagram_poll(struct file *file, struct socket *sock, + poll_table *wait) { struct sock *sk = sock->sk; - __poll_t mask = 0; + __poll_t mask; + + sock_poll_wait(file, sk_sleep(sk), wait); + mask = 0; /* exceptional events? */ if (sk->sk_err || !skb_queue_empty(&sk->sk_error_queue)) @@ -866,4 +871,4 @@ __poll_t datagram_poll_mask(struct socket *sock, __poll_t events) return mask; } -EXPORT_SYMBOL(datagram_poll_mask); +EXPORT_SYMBOL(datagram_poll); diff --git a/net/core/dev.c b/net/core/dev.c index 57b7bab5f70b..a5aa1c7444e6 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -8643,7 +8643,8 @@ int dev_change_net_namespace(struct net_device *dev, struct net *net, const char /* We get here if we can't use the current device name */ if (!pat) goto out; - if (dev_get_valid_name(net, dev, pat) < 0) + err = dev_get_valid_name(net, dev, pat); + if (err < 0) goto out; } @@ -8655,7 +8656,6 @@ int dev_change_net_namespace(struct net_device *dev, struct net *net, const char dev_close(dev); /* And unlink it from device chain */ - err = -ENODEV; unlist_netdevice(dev); synchronize_net(); diff --git a/net/core/filter.c b/net/core/filter.c index 3d9ba7e5965a..e7f12e9f598c 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -3214,20 +3214,6 @@ err: } EXPORT_SYMBOL_GPL(xdp_do_redirect); -static int __xdp_generic_ok_fwd_dev(struct sk_buff *skb, struct net_device *fwd) -{ - unsigned int len; - - if (unlikely(!(fwd->flags & IFF_UP))) - return -ENETDOWN; - - len = fwd->mtu + fwd->hard_header_len + VLAN_HLEN; - if (skb->len > len) - return -EMSGSIZE; - - return 0; -} - static int xdp_do_generic_redirect_map(struct net_device *dev, struct sk_buff *skb, struct xdp_buff *xdp, @@ -3256,10 +3242,11 @@ static int xdp_do_generic_redirect_map(struct net_device *dev, } if (map->map_type == BPF_MAP_TYPE_DEVMAP) { - if (unlikely((err = __xdp_generic_ok_fwd_dev(skb, fwd)))) + struct bpf_dtab_netdev *dst = fwd; + + err = dev_map_generic_redirect(dst, skb, xdp_prog); + if (unlikely(err)) goto err; - skb->dev = fwd; - generic_xdp_tx(skb, xdp_prog); } else if (map->map_type == BPF_MAP_TYPE_XSKMAP) { struct xdp_sock *xs = fwd; diff --git a/net/dccp/ccids/ccid3.c b/net/dccp/ccids/ccid3.c index 8b5ba6dffac7..12877a1514e7 100644 --- a/net/dccp/ccids/ccid3.c +++ b/net/dccp/ccids/ccid3.c @@ -600,7 +600,7 @@ static void ccid3_hc_rx_send_feedback(struct sock *sk, { struct ccid3_hc_rx_sock *hc = ccid3_hc_rx_sk(sk); struct dccp_sock *dp = dccp_sk(sk); - ktime_t now = ktime_get_real(); + ktime_t now = ktime_get(); s64 delta = 0; switch (fbtype) { @@ -625,15 +625,14 @@ static void ccid3_hc_rx_send_feedback(struct sock *sk, case CCID3_FBACK_PERIODIC: delta = ktime_us_delta(now, hc->rx_tstamp_last_feedback); if (delta <= 0) - DCCP_BUG("delta (%ld) <= 0", (long)delta); - else - hc->rx_x_recv = scaled_div32(hc->rx_bytes_recv, delta); + delta = 1; + hc->rx_x_recv = scaled_div32(hc->rx_bytes_recv, delta); break; default: return; } - ccid3_pr_debug("Interval %ldusec, X_recv=%u, 1/p=%u\n", (long)delta, + ccid3_pr_debug("Interval %lldusec, X_recv=%u, 1/p=%u\n", delta, hc->rx_x_recv, hc->rx_pinv); hc->rx_tstamp_last_feedback = now; @@ -680,7 +679,8 @@ static int ccid3_hc_rx_insert_options(struct sock *sk, struct sk_buff *skb) static u32 ccid3_first_li(struct sock *sk) { struct ccid3_hc_rx_sock *hc = ccid3_hc_rx_sk(sk); - u32 x_recv, p, delta; + u32 x_recv, p; + s64 delta; u64 fval; if (hc->rx_rtt == 0) { @@ -688,7 +688,9 @@ static u32 ccid3_first_li(struct sock *sk) hc->rx_rtt = DCCP_FALLBACK_RTT; } - delta = ktime_to_us(net_timedelta(hc->rx_tstamp_last_feedback)); + delta = ktime_us_delta(ktime_get(), hc->rx_tstamp_last_feedback); + if (delta <= 0) + delta = 1; x_recv = scaled_div32(hc->rx_bytes_recv, delta); if (x_recv == 0) { /* would also trigger divide-by-zero */ DCCP_WARN("X_recv==0\n"); diff --git a/net/dccp/dccp.h b/net/dccp/dccp.h index 0ea2ee56ac1b..f91e3816806b 100644 --- a/net/dccp/dccp.h +++ b/net/dccp/dccp.h @@ -316,7 +316,8 @@ int dccp_recvmsg(struct sock *sk, struct msghdr *msg, size_t len, int nonblock, int flags, int *addr_len); void dccp_shutdown(struct sock *sk, int how); int inet_dccp_listen(struct socket *sock, int backlog); -__poll_t dccp_poll_mask(struct socket *sock, __poll_t events); +__poll_t dccp_poll(struct file *file, struct socket *sock, + poll_table *wait); int dccp_v4_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len); void dccp_req_err(struct sock *sk, u64 seq); diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c index a9e478cd3787..b08feb219b44 100644 --- a/net/dccp/ipv4.c +++ b/net/dccp/ipv4.c @@ -984,7 +984,7 @@ static const struct proto_ops inet_dccp_ops = { .accept = inet_accept, .getname = inet_getname, /* FIXME: work on tcp_poll to rename it to inet_csk_poll */ - .poll_mask = dccp_poll_mask, + .poll = dccp_poll, .ioctl = inet_ioctl, /* FIXME: work on inet_listen to rename it to sock_common_listen */ .listen = inet_dccp_listen, diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c index 17fc4e0166ba..6344f1b18a6a 100644 --- a/net/dccp/ipv6.c +++ b/net/dccp/ipv6.c @@ -1070,7 +1070,7 @@ static const struct proto_ops inet6_dccp_ops = { .socketpair = sock_no_socketpair, .accept = inet_accept, .getname = inet6_getname, - .poll_mask = dccp_poll_mask, + .poll = dccp_poll, .ioctl = inet6_ioctl, .listen = inet_dccp_listen, .shutdown = inet_shutdown, diff --git a/net/dccp/proto.c b/net/dccp/proto.c index ca21c1c76da0..0d56e36a6db7 100644 --- a/net/dccp/proto.c +++ b/net/dccp/proto.c @@ -312,11 +312,20 @@ int dccp_disconnect(struct sock *sk, int flags) EXPORT_SYMBOL_GPL(dccp_disconnect); -__poll_t dccp_poll_mask(struct socket *sock, __poll_t events) +/* + * Wait for a DCCP event. + * + * Note that we don't need to lock the socket, as the upper poll layers + * take care of normal races (between the test and the event) and we don't + * go look at any of the socket buffers directly. + */ +__poll_t dccp_poll(struct file *file, struct socket *sock, + poll_table *wait) { __poll_t mask; struct sock *sk = sock->sk; + sock_poll_wait(file, sk_sleep(sk), wait); if (sk->sk_state == DCCP_LISTEN) return inet_csk_listen_poll(sk); @@ -358,7 +367,7 @@ __poll_t dccp_poll_mask(struct socket *sock, __poll_t events) return mask; } -EXPORT_SYMBOL_GPL(dccp_poll_mask); +EXPORT_SYMBOL_GPL(dccp_poll); int dccp_ioctl(struct sock *sk, int cmd, unsigned long arg) { diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c index 9a686d890bfa..7d6ff983ba2c 100644 --- a/net/decnet/af_decnet.c +++ b/net/decnet/af_decnet.c @@ -1207,11 +1207,11 @@ static int dn_getname(struct socket *sock, struct sockaddr *uaddr,int peer) } -static __poll_t dn_poll_mask(struct socket *sock, __poll_t events) +static __poll_t dn_poll(struct file *file, struct socket *sock, poll_table *wait) { struct sock *sk = sock->sk; struct dn_scp *scp = DN_SK(sk); - __poll_t mask = datagram_poll_mask(sock, events); + __poll_t mask = datagram_poll(file, sock, wait); if (!skb_queue_empty(&scp->other_receive_queue)) mask |= EPOLLRDBAND; @@ -2331,7 +2331,7 @@ static const struct proto_ops dn_proto_ops = { .socketpair = sock_no_socketpair, .accept = dn_accept, .getname = dn_getname, - .poll_mask = dn_poll_mask, + .poll = dn_poll, .ioctl = dn_ioctl, .listen = dn_listen, .shutdown = dn_shutdown, diff --git a/net/ieee802154/socket.c b/net/ieee802154/socket.c index a0768d2759b8..a60658c85a9a 100644 --- a/net/ieee802154/socket.c +++ b/net/ieee802154/socket.c @@ -423,7 +423,7 @@ static const struct proto_ops ieee802154_raw_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = sock_no_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = ieee802154_sock_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, @@ -969,7 +969,7 @@ static const struct proto_ops ieee802154_dgram_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = sock_no_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = ieee802154_sock_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c index 15e125558c76..b403499fdabe 100644 --- a/net/ipv4/af_inet.c +++ b/net/ipv4/af_inet.c @@ -986,7 +986,7 @@ const struct proto_ops inet_stream_ops = { .socketpair = sock_no_socketpair, .accept = inet_accept, .getname = inet_getname, - .poll_mask = tcp_poll_mask, + .poll = tcp_poll, .ioctl = inet_ioctl, .listen = inet_listen, .shutdown = inet_shutdown, @@ -1021,7 +1021,7 @@ const struct proto_ops inet_dgram_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = inet_getname, - .poll_mask = udp_poll_mask, + .poll = udp_poll, .ioctl = inet_ioctl, .listen = sock_no_listen, .shutdown = inet_shutdown, @@ -1042,7 +1042,7 @@ EXPORT_SYMBOL(inet_dgram_ops); /* * For SOCK_RAW sockets; should be the same as inet_dgram_ops but without - * udp_poll_mask + * udp_poll */ static const struct proto_ops inet_sockraw_ops = { .family = PF_INET, @@ -1053,7 +1053,7 @@ static const struct proto_ops inet_sockraw_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = inet_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = inet_ioctl, .listen = sock_no_listen, .shutdown = inet_shutdown, diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c index 31ff46daae97..3647167c8fa3 100644 --- a/net/ipv4/inet_hashtables.c +++ b/net/ipv4/inet_hashtables.c @@ -243,9 +243,9 @@ static inline int compute_score(struct sock *sk, struct net *net, bool dev_match = (sk->sk_bound_dev_if == dif || sk->sk_bound_dev_if == sdif); - if (exact_dif && !dev_match) + if (!dev_match) return -1; - if (sk->sk_bound_dev_if && dev_match) + if (sk->sk_bound_dev_if) score += 4; } if (sk->sk_incoming_cpu == raw_smp_processor_id()) diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index af5a830ff6ad..b3308e9d9762 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -1145,7 +1145,8 @@ static int ip_setup_cork(struct sock *sk, struct inet_cork *cork, cork->fragsize = ip_sk_use_pmtu(sk) ? dst_mtu(&rt->dst) : rt->dst.dev->mtu; - cork->gso_size = sk->sk_type == SOCK_DGRAM ? ipc->gso_size : 0; + cork->gso_size = sk->sk_type == SOCK_DGRAM && + sk->sk_protocol == IPPROTO_UDP ? ipc->gso_size : 0; cork->dst = &rt->dst; cork->length = 0; cork->ttl = ipc->ttl; diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 141acd92e58a..e7b53d2a971f 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -494,21 +494,32 @@ static inline bool tcp_stream_is_readable(const struct tcp_sock *tp, } /* - * Socket is not locked. We are protected from async events by poll logic and - * correct handling of state changes made by other threads is impossible in - * any case. + * Wait for a TCP event. + * + * Note that we don't need to lock the socket, as the upper poll layers + * take care of normal races (between the test and the event) and we don't + * go look at any of the socket buffers directly. */ -__poll_t tcp_poll_mask(struct socket *sock, __poll_t events) +__poll_t tcp_poll(struct file *file, struct socket *sock, poll_table *wait) { + __poll_t mask; struct sock *sk = sock->sk; const struct tcp_sock *tp = tcp_sk(sk); - __poll_t mask = 0; int state; + sock_poll_wait(file, sk_sleep(sk), wait); + state = inet_sk_state_load(sk); if (state == TCP_LISTEN) return inet_csk_listen_poll(sk); + /* Socket is not locked. We are protected from async events + * by poll logic and correct handling of state changes + * made by other threads is impossible in any case. + */ + + mask = 0; + /* * EPOLLHUP is certainly not done right. But poll() doesn't * have a notion of HUP in just one direction, and for a @@ -589,7 +600,7 @@ __poll_t tcp_poll_mask(struct socket *sock, __poll_t events) return mask; } -EXPORT_SYMBOL(tcp_poll_mask); +EXPORT_SYMBOL(tcp_poll); int tcp_ioctl(struct sock *sk, int cmd, unsigned long arg) { diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 9bb27df4dac5..24e116ddae79 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -2591,7 +2591,7 @@ int compat_udp_getsockopt(struct sock *sk, int level, int optname, * udp_poll - wait for a UDP event. * @file - file struct * @sock - socket - * @events - events to wait for + * @wait - poll table * * This is same as datagram poll, except for the special case of * blocking sockets. If application is using a blocking fd @@ -2600,23 +2600,23 @@ int compat_udp_getsockopt(struct sock *sk, int level, int optname, * but then block when reading it. Add special case code * to work around these arguably broken applications. */ -__poll_t udp_poll_mask(struct socket *sock, __poll_t events) +__poll_t udp_poll(struct file *file, struct socket *sock, poll_table *wait) { - __poll_t mask = datagram_poll_mask(sock, events); + __poll_t mask = datagram_poll(file, sock, wait); struct sock *sk = sock->sk; if (!skb_queue_empty(&udp_sk(sk)->reader_queue)) mask |= EPOLLIN | EPOLLRDNORM; /* Check for false positives due to checksum errors */ - if ((mask & EPOLLRDNORM) && !(sock->file->f_flags & O_NONBLOCK) && + if ((mask & EPOLLRDNORM) && !(file->f_flags & O_NONBLOCK) && !(sk->sk_shutdown & RCV_SHUTDOWN) && first_packet_length(sk) == -1) mask &= ~(EPOLLIN | EPOLLRDNORM); return mask; } -EXPORT_SYMBOL(udp_poll_mask); +EXPORT_SYMBOL(udp_poll); int udp_abort(struct sock *sk, int err) { diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c index 74f2a261e8df..9ed0eae91758 100644 --- a/net/ipv6/af_inet6.c +++ b/net/ipv6/af_inet6.c @@ -570,7 +570,7 @@ const struct proto_ops inet6_stream_ops = { .socketpair = sock_no_socketpair, /* a do nothing */ .accept = inet_accept, /* ok */ .getname = inet6_getname, - .poll_mask = tcp_poll_mask, /* ok */ + .poll = tcp_poll, /* ok */ .ioctl = inet6_ioctl, /* must change */ .listen = inet_listen, /* ok */ .shutdown = inet_shutdown, /* ok */ @@ -603,7 +603,7 @@ const struct proto_ops inet6_dgram_ops = { .socketpair = sock_no_socketpair, /* a do nothing */ .accept = sock_no_accept, /* a do nothing */ .getname = inet6_getname, - .poll_mask = udp_poll_mask, /* ok */ + .poll = udp_poll, /* ok */ .ioctl = inet6_ioctl, /* must change */ .listen = sock_no_listen, /* ok */ .shutdown = inet_shutdown, /* ok */ diff --git a/net/ipv6/inet6_hashtables.c b/net/ipv6/inet6_hashtables.c index 2febe26de6a1..595ad408dba0 100644 --- a/net/ipv6/inet6_hashtables.c +++ b/net/ipv6/inet6_hashtables.c @@ -113,9 +113,9 @@ static inline int compute_score(struct sock *sk, struct net *net, bool dev_match = (sk->sk_bound_dev_if == dif || sk->sk_bound_dev_if == sdif); - if (exact_dif && !dev_match) + if (!dev_match) return -1; - if (sk->sk_bound_dev_if && dev_match) + if (sk->sk_bound_dev_if) score++; } if (sk->sk_incoming_cpu == raw_smp_processor_id()) diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c index 39d1d487eca2..1fb2f3118d60 100644 --- a/net/ipv6/ip6_fib.c +++ b/net/ipv6/ip6_fib.c @@ -167,8 +167,9 @@ struct fib6_info *fib6_info_alloc(gfp_t gfp_flags) return f6i; } -void fib6_info_destroy(struct fib6_info *f6i) +void fib6_info_destroy_rcu(struct rcu_head *head) { + struct fib6_info *f6i = container_of(head, struct fib6_info, rcu); struct rt6_exception_bucket *bucket; struct dst_metrics *m; @@ -206,7 +207,7 @@ void fib6_info_destroy(struct fib6_info *f6i) kfree(f6i); } -EXPORT_SYMBOL_GPL(fib6_info_destroy); +EXPORT_SYMBOL_GPL(fib6_info_destroy_rcu); static struct fib6_node *node_alloc(struct net *net) { diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index 021e5aef6ba3..a14fb4fcdf18 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -1219,7 +1219,8 @@ static int ip6_setup_cork(struct sock *sk, struct inet_cork_full *cork, if (mtu < IPV6_MIN_MTU) return -EINVAL; cork->base.fragsize = mtu; - cork->base.gso_size = sk->sk_type == SOCK_DGRAM ? ipc6->gso_size : 0; + cork->base.gso_size = sk->sk_type == SOCK_DGRAM && + sk->sk_protocol == IPPROTO_UDP ? ipc6->gso_size : 0; if (dst_allfrag(xfrm_dst_path(&rt->dst))) cork->base.flags |= IPCORK_ALLFRAG; diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c index 975021df7c1c..c0c74088f2af 100644 --- a/net/ipv6/mcast.c +++ b/net/ipv6/mcast.c @@ -2082,7 +2082,8 @@ void ipv6_mc_dad_complete(struct inet6_dev *idev) mld_send_initial_cr(idev); idev->mc_dad_count--; if (idev->mc_dad_count) - mld_dad_start_timer(idev, idev->mc_maxdelay); + mld_dad_start_timer(idev, + unsolicited_report_interval(idev)); } } @@ -2094,7 +2095,8 @@ static void mld_dad_timer_expire(struct timer_list *t) if (idev->mc_dad_count) { idev->mc_dad_count--; if (idev->mc_dad_count) - mld_dad_start_timer(idev, idev->mc_maxdelay); + mld_dad_start_timer(idev, + unsolicited_report_interval(idev)); } in6_dev_put(idev); } @@ -2452,7 +2454,8 @@ static void mld_ifc_timer_expire(struct timer_list *t) if (idev->mc_ifc_count) { idev->mc_ifc_count--; if (idev->mc_ifc_count) - mld_ifc_start_timer(idev, idev->mc_maxdelay); + mld_ifc_start_timer(idev, + unsolicited_report_interval(idev)); } in6_dev_put(idev); } diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c index ce6f0d15b5dd..afc307c89d1a 100644 --- a/net/ipv6/raw.c +++ b/net/ipv6/raw.c @@ -1334,7 +1334,7 @@ void raw6_proc_exit(void) } #endif /* CONFIG_PROC_FS */ -/* Same as inet6_dgram_ops, sans udp_poll_mask. */ +/* Same as inet6_dgram_ops, sans udp_poll. */ const struct proto_ops inet6_sockraw_ops = { .family = PF_INET6, .owner = THIS_MODULE, @@ -1344,7 +1344,7 @@ const struct proto_ops inet6_sockraw_ops = { .socketpair = sock_no_socketpair, /* a do nothing */ .accept = sock_no_accept, /* a do nothing */ .getname = inet6_getname, - .poll_mask = datagram_poll_mask, /* ok */ + .poll = datagram_poll, /* ok */ .ioctl = inet6_ioctl, /* must change */ .listen = sock_no_listen, /* ok */ .shutdown = inet_shutdown, /* ok */ diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c index 68e86257a549..893a022f9620 100644 --- a/net/iucv/af_iucv.c +++ b/net/iucv/af_iucv.c @@ -1488,11 +1488,14 @@ static inline __poll_t iucv_accept_poll(struct sock *parent) return 0; } -static __poll_t iucv_sock_poll_mask(struct socket *sock, __poll_t events) +__poll_t iucv_sock_poll(struct file *file, struct socket *sock, + poll_table *wait) { struct sock *sk = sock->sk; __poll_t mask = 0; + sock_poll_wait(file, sk_sleep(sk), wait); + if (sk->sk_state == IUCV_LISTEN) return iucv_accept_poll(sk); @@ -2385,7 +2388,7 @@ static const struct proto_ops iucv_sock_ops = { .getname = iucv_sock_getname, .sendmsg = iucv_sock_sendmsg, .recvmsg = iucv_sock_recvmsg, - .poll_mask = iucv_sock_poll_mask, + .poll = iucv_sock_poll, .ioctl = sock_no_ioctl, .mmap = sock_no_mmap, .socketpair = sock_no_socketpair, diff --git a/net/kcm/kcmsock.c b/net/kcm/kcmsock.c index 84b7d5c6fec8..d3601d421571 100644 --- a/net/kcm/kcmsock.c +++ b/net/kcm/kcmsock.c @@ -1336,9 +1336,9 @@ static void init_kcm_sock(struct kcm_sock *kcm, struct kcm_mux *mux) struct list_head *head; int index = 0; - /* For SOCK_SEQPACKET sock type, datagram_poll_mask checks the sk_state, - * so we set sk_state, otherwise epoll_wait always returns right away - * with EPOLLHUP + /* For SOCK_SEQPACKET sock type, datagram_poll checks the sk_state, so + * we set sk_state, otherwise epoll_wait always returns right away with + * EPOLLHUP */ kcm->sk.sk_state = TCP_ESTABLISHED; @@ -1903,7 +1903,7 @@ static const struct proto_ops kcm_dgram_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = sock_no_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = kcm_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, @@ -1924,7 +1924,7 @@ static const struct proto_ops kcm_seqpacket_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = sock_no_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = kcm_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, diff --git a/net/key/af_key.c b/net/key/af_key.c index 8bdc1cbe490a..5e1d2946ffbf 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -3751,7 +3751,7 @@ static const struct proto_ops pfkey_ops = { /* Now the operations that really occur. */ .release = pfkey_release, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .sendmsg = pfkey_sendmsg, .recvmsg = pfkey_recvmsg, }; diff --git a/net/l2tp/l2tp_ip.c b/net/l2tp/l2tp_ip.c index 181073bf6925..a9c05b2bc1b0 100644 --- a/net/l2tp/l2tp_ip.c +++ b/net/l2tp/l2tp_ip.c @@ -613,7 +613,7 @@ static const struct proto_ops l2tp_ip_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = l2tp_ip_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = inet_ioctl, .listen = sock_no_listen, .shutdown = inet_shutdown, diff --git a/net/l2tp/l2tp_ip6.c b/net/l2tp/l2tp_ip6.c index 336e4c00abbc..957369192ca1 100644 --- a/net/l2tp/l2tp_ip6.c +++ b/net/l2tp/l2tp_ip6.c @@ -754,7 +754,7 @@ static const struct proto_ops l2tp_ip6_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = l2tp_ip6_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = inet6_ioctl, .listen = sock_no_listen, .shutdown = inet_shutdown, diff --git a/net/l2tp/l2tp_ppp.c b/net/l2tp/l2tp_ppp.c index 55188382845c..e398797878a9 100644 --- a/net/l2tp/l2tp_ppp.c +++ b/net/l2tp/l2tp_ppp.c @@ -1818,7 +1818,7 @@ static const struct proto_ops pppol2tp_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = pppol2tp_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .listen = sock_no_listen, .shutdown = sock_no_shutdown, .setsockopt = pppol2tp_setsockopt, diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c index 804de8490186..1beeea9549fa 100644 --- a/net/llc/af_llc.c +++ b/net/llc/af_llc.c @@ -1192,7 +1192,7 @@ static const struct proto_ops llc_ui_ops = { .socketpair = sock_no_socketpair, .accept = llc_ui_accept, .getname = llc_ui_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = llc_ui_ioctl, .listen = llc_ui_listen, .shutdown = llc_ui_shutdown, diff --git a/net/ncsi/ncsi-aen.c b/net/ncsi/ncsi-aen.c index e7b05de1e6d1..25e483e8278b 100644 --- a/net/ncsi/ncsi-aen.c +++ b/net/ncsi/ncsi-aen.c @@ -73,8 +73,8 @@ static int ncsi_aen_handler_lsc(struct ncsi_dev_priv *ndp, ncm->data[2] = data; ncm->data[4] = ntohl(lsc->oem_status); - netdev_info(ndp->ndev.dev, "NCSI: LSC AEN - channel %u state %s\n", - nc->id, data & 0x1 ? "up" : "down"); + netdev_dbg(ndp->ndev.dev, "NCSI: LSC AEN - channel %u state %s\n", + nc->id, data & 0x1 ? "up" : "down"); chained = !list_empty(&nc->link); state = nc->state; @@ -148,9 +148,9 @@ static int ncsi_aen_handler_hncdsc(struct ncsi_dev_priv *ndp, hncdsc = (struct ncsi_aen_hncdsc_pkt *)h; ncm->data[3] = ntohl(hncdsc->status); spin_unlock_irqrestore(&nc->lock, flags); - netdev_printk(KERN_DEBUG, ndp->ndev.dev, - "NCSI: host driver %srunning on channel %u\n", - ncm->data[3] & 0x1 ? "" : "not ", nc->id); + netdev_dbg(ndp->ndev.dev, + "NCSI: host driver %srunning on channel %u\n", + ncm->data[3] & 0x1 ? "" : "not ", nc->id); return 0; } diff --git a/net/ncsi/ncsi-manage.c b/net/ncsi/ncsi-manage.c index 5561e221b71f..091284760d21 100644 --- a/net/ncsi/ncsi-manage.c +++ b/net/ncsi/ncsi-manage.c @@ -788,8 +788,8 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp) } break; case ncsi_dev_state_config_done: - netdev_printk(KERN_DEBUG, ndp->ndev.dev, - "NCSI: channel %u config done\n", nc->id); + netdev_dbg(ndp->ndev.dev, "NCSI: channel %u config done\n", + nc->id); spin_lock_irqsave(&nc->lock, flags); if (nc->reconfigure_needed) { /* This channel's configuration has been updated @@ -804,8 +804,7 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp) list_add_tail_rcu(&nc->link, &ndp->channel_queue); spin_unlock_irqrestore(&ndp->lock, flags); - netdev_printk(KERN_DEBUG, dev, - "Dirty NCSI channel state reset\n"); + netdev_dbg(dev, "Dirty NCSI channel state reset\n"); ncsi_process_next_channel(ndp); break; } @@ -816,9 +815,9 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp) } else { hot_nc = NULL; nc->state = NCSI_CHANNEL_INACTIVE; - netdev_warn(ndp->ndev.dev, - "NCSI: channel %u link down after config\n", - nc->id); + netdev_dbg(ndp->ndev.dev, + "NCSI: channel %u link down after config\n", + nc->id); } spin_unlock_irqrestore(&nc->lock, flags); @@ -908,9 +907,9 @@ static int ncsi_choose_active_channel(struct ncsi_dev_priv *ndp) } ncm = &found->modes[NCSI_MODE_LINK]; - netdev_printk(KERN_DEBUG, ndp->ndev.dev, - "NCSI: Channel %u added to queue (link %s)\n", - found->id, ncm->data[2] & 0x1 ? "up" : "down"); + netdev_dbg(ndp->ndev.dev, + "NCSI: Channel %u added to queue (link %s)\n", + found->id, ncm->data[2] & 0x1 ? "up" : "down"); out: spin_lock_irqsave(&ndp->lock, flags); @@ -1199,14 +1198,14 @@ int ncsi_process_next_channel(struct ncsi_dev_priv *ndp) switch (old_state) { case NCSI_CHANNEL_INACTIVE: ndp->ndev.state = ncsi_dev_state_config; - netdev_info(ndp->ndev.dev, "NCSI: configuring channel %u\n", - nc->id); + netdev_dbg(ndp->ndev.dev, "NCSI: configuring channel %u\n", + nc->id); ncsi_configure_channel(ndp); break; case NCSI_CHANNEL_ACTIVE: ndp->ndev.state = ncsi_dev_state_suspend; - netdev_info(ndp->ndev.dev, "NCSI: suspending channel %u\n", - nc->id); + netdev_dbg(ndp->ndev.dev, "NCSI: suspending channel %u\n", + nc->id); ncsi_suspend_channel(ndp); break; default: @@ -1226,8 +1225,6 @@ out: return ncsi_choose_active_channel(ndp); } - netdev_printk(KERN_DEBUG, ndp->ndev.dev, - "NCSI: No more channels to process\n"); ncsi_report_link(ndp, false); return -ENODEV; } @@ -1318,9 +1315,9 @@ static int ncsi_kick_channels(struct ncsi_dev_priv *ndp) if ((ndp->ndev.state & 0xff00) == ncsi_dev_state_config || !list_empty(&nc->link)) { - netdev_printk(KERN_DEBUG, nd->dev, - "NCSI: channel %p marked dirty\n", - nc); + netdev_dbg(nd->dev, + "NCSI: channel %p marked dirty\n", + nc); nc->reconfigure_needed = true; } spin_unlock_irqrestore(&nc->lock, flags); @@ -1338,8 +1335,7 @@ static int ncsi_kick_channels(struct ncsi_dev_priv *ndp) list_add_tail_rcu(&nc->link, &ndp->channel_queue); spin_unlock_irqrestore(&ndp->lock, flags); - netdev_printk(KERN_DEBUG, nd->dev, - "NCSI: kicked channel %p\n", nc); + netdev_dbg(nd->dev, "NCSI: kicked channel %p\n", nc); n++; } } @@ -1370,8 +1366,8 @@ int ncsi_vlan_rx_add_vid(struct net_device *dev, __be16 proto, u16 vid) list_for_each_entry_rcu(vlan, &ndp->vlan_vids, list) { n_vids++; if (vlan->vid == vid) { - netdev_printk(KERN_DEBUG, dev, - "NCSI: vid %u already registered\n", vid); + netdev_dbg(dev, "NCSI: vid %u already registered\n", + vid); return 0; } } @@ -1390,7 +1386,7 @@ int ncsi_vlan_rx_add_vid(struct net_device *dev, __be16 proto, u16 vid) vlan->vid = vid; list_add_rcu(&vlan->list, &ndp->vlan_vids); - netdev_printk(KERN_DEBUG, dev, "NCSI: Added new vid %u\n", vid); + netdev_dbg(dev, "NCSI: Added new vid %u\n", vid); found = ncsi_kick_channels(ndp) != 0; @@ -1419,8 +1415,7 @@ int ncsi_vlan_rx_kill_vid(struct net_device *dev, __be16 proto, u16 vid) /* Remove the VLAN id from our internal list */ list_for_each_entry_safe(vlan, tmp, &ndp->vlan_vids, list) if (vlan->vid == vid) { - netdev_printk(KERN_DEBUG, dev, - "NCSI: vid %u found, removing\n", vid); + netdev_dbg(dev, "NCSI: vid %u found, removing\n", vid); list_del_rcu(&vlan->list); found = true; kfree(vlan); @@ -1547,7 +1542,7 @@ void ncsi_stop_dev(struct ncsi_dev *nd) } } - netdev_printk(KERN_DEBUG, ndp->ndev.dev, "NCSI: Stopping device\n"); + netdev_dbg(ndp->ndev.dev, "NCSI: Stopping device\n"); ncsi_report_link(ndp, true); } EXPORT_SYMBOL_GPL(ncsi_stop_dev); diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index 1189b84413d5..393573a99a5a 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -2658,7 +2658,7 @@ static const struct proto_ops netlink_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = netlink_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = netlink_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c index 93fbcafbf388..03f37c4e64fe 100644 --- a/net/netrom/af_netrom.c +++ b/net/netrom/af_netrom.c @@ -1355,7 +1355,7 @@ static const struct proto_ops nr_proto_ops = { .socketpair = sock_no_socketpair, .accept = nr_accept, .getname = nr_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = nr_ioctl, .listen = nr_listen, .shutdown = sock_no_shutdown, diff --git a/net/nfc/llcp_sock.c b/net/nfc/llcp_sock.c index ab5bb14b49af..ea0c0c6f1874 100644 --- a/net/nfc/llcp_sock.c +++ b/net/nfc/llcp_sock.c @@ -548,13 +548,16 @@ static inline __poll_t llcp_accept_poll(struct sock *parent) return 0; } -static __poll_t llcp_sock_poll_mask(struct socket *sock, __poll_t events) +static __poll_t llcp_sock_poll(struct file *file, struct socket *sock, + poll_table *wait) { struct sock *sk = sock->sk; __poll_t mask = 0; pr_debug("%p\n", sk); + sock_poll_wait(file, sk_sleep(sk), wait); + if (sk->sk_state == LLCP_LISTEN) return llcp_accept_poll(sk); @@ -896,7 +899,7 @@ static const struct proto_ops llcp_sock_ops = { .socketpair = sock_no_socketpair, .accept = llcp_sock_accept, .getname = llcp_sock_getname, - .poll_mask = llcp_sock_poll_mask, + .poll = llcp_sock_poll, .ioctl = sock_no_ioctl, .listen = llcp_sock_listen, .shutdown = sock_no_shutdown, @@ -916,7 +919,7 @@ static const struct proto_ops llcp_rawsock_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = llcp_sock_getname, - .poll_mask = llcp_sock_poll_mask, + .poll = llcp_sock_poll, .ioctl = sock_no_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, diff --git a/net/nfc/rawsock.c b/net/nfc/rawsock.c index 60c322531c49..e2188deb08dc 100644 --- a/net/nfc/rawsock.c +++ b/net/nfc/rawsock.c @@ -284,7 +284,7 @@ static const struct proto_ops rawsock_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = sock_no_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = sock_no_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, @@ -304,7 +304,7 @@ static const struct proto_ops rawsock_raw_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = sock_no_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = sock_no_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index 50809748c127..57634bc3da74 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -2262,6 +2262,13 @@ static int tpacket_rcv(struct sk_buff *skb, struct net_device *dev, if (po->stats.stats1.tp_drops) status |= TP_STATUS_LOSING; } + + if (do_vnet && + virtio_net_hdr_from_skb(skb, h.raw + macoff - + sizeof(struct virtio_net_hdr), + vio_le(), true, 0)) + goto drop_n_account; + po->stats.stats1.tp_packets++; if (copy_skb) { status |= TP_STATUS_COPY; @@ -2269,15 +2276,6 @@ static int tpacket_rcv(struct sk_buff *skb, struct net_device *dev, } spin_unlock(&sk->sk_receive_queue.lock); - if (do_vnet) { - if (virtio_net_hdr_from_skb(skb, h.raw + macoff - - sizeof(struct virtio_net_hdr), - vio_le(), true, 0)) { - spin_lock(&sk->sk_receive_queue.lock); - goto drop_n_account; - } - } - skb_copy_bits(skb, 0, h.raw + macoff, snaplen); if (!(ts_status = tpacket_get_timestamp(skb, &ts, po->tp_tstamp))) @@ -4078,11 +4076,12 @@ static int packet_ioctl(struct socket *sock, unsigned int cmd, return 0; } -static __poll_t packet_poll_mask(struct socket *sock, __poll_t events) +static __poll_t packet_poll(struct file *file, struct socket *sock, + poll_table *wait) { struct sock *sk = sock->sk; struct packet_sock *po = pkt_sk(sk); - __poll_t mask = datagram_poll_mask(sock, events); + __poll_t mask = datagram_poll(file, sock, wait); spin_lock_bh(&sk->sk_receive_queue.lock); if (po->rx_ring.pg_vec) { @@ -4424,7 +4423,7 @@ static const struct proto_ops packet_ops_spkt = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = packet_getname_spkt, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = packet_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, @@ -4445,7 +4444,7 @@ static const struct proto_ops packet_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = packet_getname, - .poll_mask = packet_poll_mask, + .poll = packet_poll, .ioctl = packet_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, diff --git a/net/phonet/socket.c b/net/phonet/socket.c index c295c4e20f01..30187990257f 100644 --- a/net/phonet/socket.c +++ b/net/phonet/socket.c @@ -340,12 +340,15 @@ static int pn_socket_getname(struct socket *sock, struct sockaddr *addr, return sizeof(struct sockaddr_pn); } -static __poll_t pn_socket_poll_mask(struct socket *sock, __poll_t events) +static __poll_t pn_socket_poll(struct file *file, struct socket *sock, + poll_table *wait) { struct sock *sk = sock->sk; struct pep_sock *pn = pep_sk(sk); __poll_t mask = 0; + poll_wait(file, sk_sleep(sk), wait); + if (sk->sk_state == TCP_CLOSE) return EPOLLERR; if (!skb_queue_empty(&sk->sk_receive_queue)) @@ -445,7 +448,7 @@ const struct proto_ops phonet_dgram_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = pn_socket_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = pn_socket_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, @@ -470,7 +473,7 @@ const struct proto_ops phonet_stream_ops = { .socketpair = sock_no_socketpair, .accept = pn_socket_accept, .getname = pn_socket_getname, - .poll_mask = pn_socket_poll_mask, + .poll = pn_socket_poll, .ioctl = pn_socket_ioctl, .listen = pn_socket_listen, .shutdown = sock_no_shutdown, diff --git a/net/qrtr/qrtr.c b/net/qrtr/qrtr.c index 1b5025ea5b04..2aa07b547b16 100644 --- a/net/qrtr/qrtr.c +++ b/net/qrtr/qrtr.c @@ -1023,7 +1023,7 @@ static const struct proto_ops qrtr_proto_ops = { .recvmsg = qrtr_recvmsg, .getname = qrtr_getname, .ioctl = qrtr_ioctl, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .shutdown = sock_no_shutdown, .setsockopt = sock_no_setsockopt, .getsockopt = sock_no_getsockopt, diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c index ebe42e7eb456..d00a0ef39a56 100644 --- a/net/rose/af_rose.c +++ b/net/rose/af_rose.c @@ -1470,7 +1470,7 @@ static const struct proto_ops rose_proto_ops = { .socketpair = sock_no_socketpair, .accept = rose_accept, .getname = rose_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = rose_ioctl, .listen = rose_listen, .shutdown = sock_no_shutdown, diff --git a/net/rxrpc/af_rxrpc.c b/net/rxrpc/af_rxrpc.c index 3b1ac93efee2..2b463047dd7b 100644 --- a/net/rxrpc/af_rxrpc.c +++ b/net/rxrpc/af_rxrpc.c @@ -734,11 +734,15 @@ static int rxrpc_getsockopt(struct socket *sock, int level, int optname, /* * permit an RxRPC socket to be polled */ -static __poll_t rxrpc_poll_mask(struct socket *sock, __poll_t events) +static __poll_t rxrpc_poll(struct file *file, struct socket *sock, + poll_table *wait) { struct sock *sk = sock->sk; struct rxrpc_sock *rx = rxrpc_sk(sk); - __poll_t mask = 0; + __poll_t mask; + + sock_poll_wait(file, sk_sleep(sk), wait); + mask = 0; /* the socket is readable if there are any messages waiting on the Rx * queue */ @@ -945,7 +949,7 @@ static const struct proto_ops rxrpc_rpc_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = sock_no_getname, - .poll_mask = rxrpc_poll_mask, + .poll = rxrpc_poll, .ioctl = sock_no_ioctl, .listen = rxrpc_listen, .shutdown = rxrpc_shutdown, diff --git a/net/sched/act_ife.c b/net/sched/act_ife.c index 8527cfdc446d..20d7d36b2fc9 100644 --- a/net/sched/act_ife.c +++ b/net/sched/act_ife.c @@ -415,7 +415,8 @@ static void tcf_ife_cleanup(struct tc_action *a) spin_unlock_bh(&ife->tcf_lock); p = rcu_dereference_protected(ife->params, 1); - kfree_rcu(p, rcu); + if (p) + kfree_rcu(p, rcu); } /* under ife->tcf_lock for existing action */ @@ -516,8 +517,6 @@ static int tcf_ife_init(struct net *net, struct nlattr *nla, saddr = nla_data(tb[TCA_IFE_SMAC]); } - ife->tcf_action = parm->action; - if (parm->flags & IFE_ENCODE) { if (daddr) ether_addr_copy(p->eth_dst, daddr); @@ -543,10 +542,8 @@ static int tcf_ife_init(struct net *net, struct nlattr *nla, NULL, NULL); if (err) { metadata_parse_err: - if (exists) - tcf_idr_release(*a, bind); if (ret == ACT_P_CREATED) - _tcf_ife_cleanup(*a); + tcf_idr_release(*a, bind); if (exists) spin_unlock_bh(&ife->tcf_lock); @@ -567,7 +564,7 @@ metadata_parse_err: err = use_all_metadata(ife); if (err) { if (ret == ACT_P_CREATED) - _tcf_ife_cleanup(*a); + tcf_idr_release(*a, bind); if (exists) spin_unlock_bh(&ife->tcf_lock); @@ -576,6 +573,7 @@ metadata_parse_err: } } + ife->tcf_action = parm->action; if (exists) spin_unlock_bh(&ife->tcf_lock); diff --git a/net/sched/cls_flower.c b/net/sched/cls_flower.c index 2b5be42a9f1c..9e8b26a80fb3 100644 --- a/net/sched/cls_flower.c +++ b/net/sched/cls_flower.c @@ -66,7 +66,7 @@ struct fl_flow_mask { struct rhashtable_params filter_ht_params; struct flow_dissector dissector; struct list_head filters; - struct rcu_head rcu; + struct rcu_work rwork; struct list_head list; }; @@ -203,6 +203,20 @@ static int fl_init(struct tcf_proto *tp) return rhashtable_init(&head->ht, &mask_ht_params); } +static void fl_mask_free(struct fl_flow_mask *mask) +{ + rhashtable_destroy(&mask->ht); + kfree(mask); +} + +static void fl_mask_free_work(struct work_struct *work) +{ + struct fl_flow_mask *mask = container_of(to_rcu_work(work), + struct fl_flow_mask, rwork); + + fl_mask_free(mask); +} + static bool fl_mask_put(struct cls_fl_head *head, struct fl_flow_mask *mask, bool async) { @@ -210,12 +224,11 @@ static bool fl_mask_put(struct cls_fl_head *head, struct fl_flow_mask *mask, return false; rhashtable_remove_fast(&head->ht, &mask->ht_node, mask_ht_params); - rhashtable_destroy(&mask->ht); list_del_rcu(&mask->list); if (async) - kfree_rcu(mask, rcu); + tcf_queue_work(&mask->rwork, fl_mask_free_work); else - kfree(mask); + fl_mask_free(mask); return true; } diff --git a/net/sched/sch_blackhole.c b/net/sched/sch_blackhole.c index c98a61e980ba..9c4c2bb547d7 100644 --- a/net/sched/sch_blackhole.c +++ b/net/sched/sch_blackhole.c @@ -21,7 +21,7 @@ static int blackhole_enqueue(struct sk_buff *skb, struct Qdisc *sch, struct sk_buff **to_free) { qdisc_drop(skb, sch, to_free); - return NET_XMIT_SUCCESS; + return NET_XMIT_SUCCESS | __NET_XMIT_BYPASS; } static struct sk_buff *blackhole_dequeue(struct Qdisc *sch) diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c index 3ae9877ea205..3278a76f6861 100644 --- a/net/sched/sch_hfsc.c +++ b/net/sched/sch_hfsc.c @@ -1385,8 +1385,8 @@ hfsc_schedule_watchdog(struct Qdisc *sch) if (next_time == 0 || next_time > q->root.cl_cfmin) next_time = q->root.cl_cfmin; } - WARN_ON(next_time == 0); - qdisc_watchdog_schedule(&q->watchdog, next_time); + if (next_time) + qdisc_watchdog_schedule(&q->watchdog, next_time); } static int diff --git a/net/sctp/chunk.c b/net/sctp/chunk.c index 79daa98208c3..bfb9f812e2ef 100644 --- a/net/sctp/chunk.c +++ b/net/sctp/chunk.c @@ -237,7 +237,9 @@ struct sctp_datamsg *sctp_datamsg_from_user(struct sctp_association *asoc, /* Account for a different sized first fragment */ if (msg_len >= first_len) { msg->can_delay = 0; - SCTP_INC_STATS(sock_net(asoc->base.sk), SCTP_MIB_FRAGUSRMSGS); + if (msg_len > first_len) + SCTP_INC_STATS(sock_net(asoc->base.sk), + SCTP_MIB_FRAGUSRMSGS); } else { /* Which may be the only one... */ first_len = msg_len; diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c index 7339918a805d..0cd2e764f47f 100644 --- a/net/sctp/ipv6.c +++ b/net/sctp/ipv6.c @@ -1010,7 +1010,7 @@ static const struct proto_ops inet6_seqpacket_ops = { .socketpair = sock_no_socketpair, .accept = inet_accept, .getname = sctp_getname, - .poll_mask = sctp_poll_mask, + .poll = sctp_poll, .ioctl = inet6_ioctl, .listen = sctp_inet_listen, .shutdown = inet_shutdown, diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c index 5dffbc493008..67f73d3a1356 100644 --- a/net/sctp/protocol.c +++ b/net/sctp/protocol.c @@ -1016,7 +1016,7 @@ static const struct proto_ops inet_seqpacket_ops = { .socketpair = sock_no_socketpair, .accept = inet_accept, .getname = inet_getname, /* Semantics are different. */ - .poll_mask = sctp_poll_mask, + .poll = sctp_poll, .ioctl = inet_ioctl, .listen = sctp_inet_listen, .shutdown = inet_shutdown, /* Looks harmless. */ diff --git a/net/sctp/socket.c b/net/sctp/socket.c index d20f7addee19..ce620e878538 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -7717,12 +7717,14 @@ out: * here, again, by modeling the current TCP/UDP code. We don't have * a good way to test with it yet. */ -__poll_t sctp_poll_mask(struct socket *sock, __poll_t events) +__poll_t sctp_poll(struct file *file, struct socket *sock, poll_table *wait) { struct sock *sk = sock->sk; struct sctp_sock *sp = sctp_sk(sk); __poll_t mask; + poll_wait(file, sk_sleep(sk), wait); + sock_rps_record_flow(sk); /* A TCP-style listening socket becomes readable when the accept queue diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c index da7f02edcd37..973b4471b532 100644 --- a/net/smc/af_smc.c +++ b/net/smc/af_smc.c @@ -1273,7 +1273,8 @@ static __poll_t smc_accept_poll(struct sock *parent) return mask; } -static __poll_t smc_poll_mask(struct socket *sock, __poll_t events) +static __poll_t smc_poll(struct file *file, struct socket *sock, + poll_table *wait) { struct sock *sk = sock->sk; __poll_t mask = 0; @@ -1289,7 +1290,7 @@ static __poll_t smc_poll_mask(struct socket *sock, __poll_t events) if ((sk->sk_state == SMC_INIT) || smc->use_fallback) { /* delegate to CLC child sock */ release_sock(sk); - mask = smc->clcsock->ops->poll_mask(smc->clcsock, events); + mask = smc->clcsock->ops->poll(file, smc->clcsock, wait); lock_sock(sk); sk->sk_err = smc->clcsock->sk->sk_err; if (sk->sk_err) { @@ -1307,6 +1308,11 @@ static __poll_t smc_poll_mask(struct socket *sock, __poll_t events) } } } else { + if (sk->sk_state != SMC_CLOSED) { + release_sock(sk); + sock_poll_wait(file, sk_sleep(sk), wait); + lock_sock(sk); + } if (sk->sk_err) mask |= EPOLLERR; if ((sk->sk_shutdown == SHUTDOWN_MASK) || @@ -1619,7 +1625,7 @@ static const struct proto_ops smc_sock_ops = { .socketpair = sock_no_socketpair, .accept = smc_accept, .getname = smc_getname, - .poll_mask = smc_poll_mask, + .poll = smc_poll, .ioctl = smc_ioctl, .listen = smc_listen, .shutdown = smc_shutdown, diff --git a/net/socket.c b/net/socket.c index 8a109012608a..85633622c94d 100644 --- a/net/socket.c +++ b/net/socket.c @@ -117,10 +117,8 @@ static ssize_t sock_write_iter(struct kiocb *iocb, struct iov_iter *from); static int sock_mmap(struct file *file, struct vm_area_struct *vma); static int sock_close(struct inode *inode, struct file *file); -static struct wait_queue_head *sock_get_poll_head(struct file *file, - __poll_t events); -static __poll_t sock_poll_mask(struct file *file, __poll_t); -static __poll_t sock_poll(struct file *file, struct poll_table_struct *wait); +static __poll_t sock_poll(struct file *file, + struct poll_table_struct *wait); static long sock_ioctl(struct file *file, unsigned int cmd, unsigned long arg); #ifdef CONFIG_COMPAT static long compat_sock_ioctl(struct file *file, @@ -143,8 +141,6 @@ static const struct file_operations socket_file_ops = { .llseek = no_llseek, .read_iter = sock_read_iter, .write_iter = sock_write_iter, - .get_poll_head = sock_get_poll_head, - .poll_mask = sock_poll_mask, .poll = sock_poll, .unlocked_ioctl = sock_ioctl, #ifdef CONFIG_COMPAT @@ -1130,48 +1126,16 @@ out_release: } EXPORT_SYMBOL(sock_create_lite); -static struct wait_queue_head *sock_get_poll_head(struct file *file, - __poll_t events) -{ - struct socket *sock = file->private_data; - - if (!sock->ops->poll_mask) - return NULL; - sock_poll_busy_loop(sock, events); - return sk_sleep(sock->sk); -} - -static __poll_t sock_poll_mask(struct file *file, __poll_t events) -{ - struct socket *sock = file->private_data; - - /* - * We need to be sure we are in sync with the socket flags modification. - * - * This memory barrier is paired in the wq_has_sleeper. - */ - smp_mb(); - - /* this socket can poll_ll so tell the system call */ - return sock->ops->poll_mask(sock, events) | - (sk_can_busy_loop(sock->sk) ? POLL_BUSY_LOOP : 0); -} - /* No kernel lock held - perfect */ static __poll_t sock_poll(struct file *file, poll_table *wait) { struct socket *sock = file->private_data; - __poll_t events = poll_requested_events(wait), mask = 0; - - if (sock->ops->poll) { - sock_poll_busy_loop(sock, events); - mask = sock->ops->poll(file, sock, wait); - } else if (sock->ops->poll_mask) { - sock_poll_wait(file, sock_get_poll_head(file, events), wait); - mask = sock->ops->poll_mask(sock, events); - } + __poll_t events = poll_requested_events(wait); - return mask | sock_poll_busy_flag(sock); + sock_poll_busy_loop(sock, events); + if (!sock->ops->poll) + return 0; + return sock->ops->poll(file, sock, wait) | sock_poll_busy_flag(sock); } static int sock_mmap(struct file *file, struct vm_area_struct *vma) diff --git a/net/strparser/strparser.c b/net/strparser/strparser.c index 1a9695183599..373836615c57 100644 --- a/net/strparser/strparser.c +++ b/net/strparser/strparser.c @@ -392,7 +392,7 @@ static int strp_read_sock(struct strparser *strp) /* Lower sock lock held */ void strp_data_ready(struct strparser *strp) { - if (unlikely(strp->stopped)) + if (unlikely(strp->stopped) || strp->paused) return; /* This check is needed to synchronize with do_strp_work. @@ -407,9 +407,6 @@ void strp_data_ready(struct strparser *strp) return; } - if (strp->paused) - return; - if (strp->need_bytes) { if (strp_peek_len(strp) < strp->need_bytes) return; diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index 3c85af058227..3fabf9f6a0f9 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -987,8 +987,6 @@ bool xprt_prepare_transmit(struct rpc_task *task) task->tk_status = -EAGAIN; goto out_unlock; } - if (!bc_prealloc(req) && !req->rq_xmit_bytes_sent) - req->rq_xid = xprt_alloc_xid(xprt); ret = true; out_unlock: spin_unlock_bh(&xprt->transport_lock); @@ -1298,7 +1296,12 @@ void xprt_retry_reserve(struct rpc_task *task) static inline __be32 xprt_alloc_xid(struct rpc_xprt *xprt) { - return (__force __be32)xprt->xid++; + __be32 xid; + + spin_lock(&xprt->reserve_lock); + xid = (__force __be32)xprt->xid++; + spin_unlock(&xprt->reserve_lock); + return xid; } static inline void xprt_init_xid(struct rpc_xprt *xprt) @@ -1316,6 +1319,7 @@ void xprt_request_init(struct rpc_task *task) req->rq_task = task; req->rq_xprt = xprt; req->rq_buffer = NULL; + req->rq_xid = xprt_alloc_xid(xprt); req->rq_connect_cookie = xprt->connect_cookie - 1; req->rq_bytes_sent = 0; req->rq_snd_buf.len = 0; diff --git a/net/tipc/socket.c b/net/tipc/socket.c index 14a5d055717d..930852c54d7a 100644 --- a/net/tipc/socket.c +++ b/net/tipc/socket.c @@ -692,9 +692,10 @@ static int tipc_getname(struct socket *sock, struct sockaddr *uaddr, } /** - * tipc_poll - read pollmask + * tipc_poll - read and possibly block on pollmask * @file: file structure associated with the socket * @sock: socket for which to calculate the poll bits + * @wait: ??? * * Returns pollmask value * @@ -708,12 +709,15 @@ static int tipc_getname(struct socket *sock, struct sockaddr *uaddr, * imply that the operation will succeed, merely that it should be performed * and will not block. */ -static __poll_t tipc_poll_mask(struct socket *sock, __poll_t events) +static __poll_t tipc_poll(struct file *file, struct socket *sock, + poll_table *wait) { struct sock *sk = sock->sk; struct tipc_sock *tsk = tipc_sk(sk); __poll_t revents = 0; + sock_poll_wait(file, sk_sleep(sk), wait); + if (sk->sk_shutdown & RCV_SHUTDOWN) revents |= EPOLLRDHUP | EPOLLIN | EPOLLRDNORM; if (sk->sk_shutdown == SHUTDOWN_MASK) @@ -3033,7 +3037,7 @@ static const struct proto_ops msg_ops = { .socketpair = tipc_socketpair, .accept = sock_no_accept, .getname = tipc_getname, - .poll_mask = tipc_poll_mask, + .poll = tipc_poll, .ioctl = tipc_ioctl, .listen = sock_no_listen, .shutdown = tipc_shutdown, @@ -3054,7 +3058,7 @@ static const struct proto_ops packet_ops = { .socketpair = tipc_socketpair, .accept = tipc_accept, .getname = tipc_getname, - .poll_mask = tipc_poll_mask, + .poll = tipc_poll, .ioctl = tipc_ioctl, .listen = tipc_listen, .shutdown = tipc_shutdown, @@ -3075,7 +3079,7 @@ static const struct proto_ops stream_ops = { .socketpair = tipc_socketpair, .accept = tipc_accept, .getname = tipc_getname, - .poll_mask = tipc_poll_mask, + .poll = tipc_poll, .ioctl = tipc_ioctl, .listen = tipc_listen, .shutdown = tipc_shutdown, diff --git a/net/tls/tls_main.c b/net/tls/tls_main.c index a127d61e8af9..301f22430469 100644 --- a/net/tls/tls_main.c +++ b/net/tls/tls_main.c @@ -712,7 +712,7 @@ static int __init tls_register(void) build_protos(tls_prots[TLSV4], &tcp_prot); tls_sw_proto_ops = inet_stream_ops; - tls_sw_proto_ops.poll_mask = tls_sw_poll_mask; + tls_sw_proto_ops.poll = tls_sw_poll; tls_sw_proto_ops.splice_read = tls_sw_splice_read; #ifdef CONFIG_TLS_DEVICE diff --git a/net/tls/tls_sw.c b/net/tls/tls_sw.c index f127fac88acf..d2380548f8f6 100644 --- a/net/tls/tls_sw.c +++ b/net/tls/tls_sw.c @@ -919,22 +919,23 @@ splice_read_end: return copied ? : err; } -__poll_t tls_sw_poll_mask(struct socket *sock, __poll_t events) +unsigned int tls_sw_poll(struct file *file, struct socket *sock, + struct poll_table_struct *wait) { + unsigned int ret; struct sock *sk = sock->sk; struct tls_context *tls_ctx = tls_get_ctx(sk); struct tls_sw_context_rx *ctx = tls_sw_ctx_rx(tls_ctx); - __poll_t mask; - /* Grab EPOLLOUT and EPOLLHUP from the underlying socket */ - mask = ctx->sk_poll_mask(sock, events); + /* Grab POLLOUT and POLLHUP from the underlying socket */ + ret = ctx->sk_poll(file, sock, wait); - /* Clear EPOLLIN bits, and set based on recv_pkt */ - mask &= ~(EPOLLIN | EPOLLRDNORM); + /* Clear POLLIN bits, and set based on recv_pkt */ + ret &= ~(POLLIN | POLLRDNORM); if (ctx->recv_pkt) - mask |= EPOLLIN | EPOLLRDNORM; + ret |= POLLIN | POLLRDNORM; - return mask; + return ret; } static int tls_read_size(struct strparser *strp, struct sk_buff *skb) @@ -1191,7 +1192,7 @@ int tls_set_sw_offload(struct sock *sk, struct tls_context *ctx, int tx) sk->sk_data_ready = tls_data_ready; write_unlock_bh(&sk->sk_callback_lock); - sw_ctx_rx->sk_poll_mask = sk->sk_socket->ops->poll_mask; + sw_ctx_rx->sk_poll = sk->sk_socket->ops->poll; strp_check_rcv(&sw_ctx_rx->strp); } diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index 95b02a71fd47..e5473c03d667 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -638,8 +638,9 @@ static int unix_stream_connect(struct socket *, struct sockaddr *, static int unix_socketpair(struct socket *, struct socket *); static int unix_accept(struct socket *, struct socket *, int, bool); static int unix_getname(struct socket *, struct sockaddr *, int); -static __poll_t unix_poll_mask(struct socket *, __poll_t); -static __poll_t unix_dgram_poll_mask(struct socket *, __poll_t); +static __poll_t unix_poll(struct file *, struct socket *, poll_table *); +static __poll_t unix_dgram_poll(struct file *, struct socket *, + poll_table *); static int unix_ioctl(struct socket *, unsigned int, unsigned long); static int unix_shutdown(struct socket *, int); static int unix_stream_sendmsg(struct socket *, struct msghdr *, size_t); @@ -680,7 +681,7 @@ static const struct proto_ops unix_stream_ops = { .socketpair = unix_socketpair, .accept = unix_accept, .getname = unix_getname, - .poll_mask = unix_poll_mask, + .poll = unix_poll, .ioctl = unix_ioctl, .listen = unix_listen, .shutdown = unix_shutdown, @@ -703,7 +704,7 @@ static const struct proto_ops unix_dgram_ops = { .socketpair = unix_socketpair, .accept = sock_no_accept, .getname = unix_getname, - .poll_mask = unix_dgram_poll_mask, + .poll = unix_dgram_poll, .ioctl = unix_ioctl, .listen = sock_no_listen, .shutdown = unix_shutdown, @@ -725,7 +726,7 @@ static const struct proto_ops unix_seqpacket_ops = { .socketpair = unix_socketpair, .accept = unix_accept, .getname = unix_getname, - .poll_mask = unix_dgram_poll_mask, + .poll = unix_dgram_poll, .ioctl = unix_ioctl, .listen = unix_listen, .shutdown = unix_shutdown, @@ -2629,10 +2630,13 @@ static int unix_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg) return err; } -static __poll_t unix_poll_mask(struct socket *sock, __poll_t events) +static __poll_t unix_poll(struct file *file, struct socket *sock, poll_table *wait) { struct sock *sk = sock->sk; - __poll_t mask = 0; + __poll_t mask; + + sock_poll_wait(file, sk_sleep(sk), wait); + mask = 0; /* exceptional events? */ if (sk->sk_err) @@ -2661,11 +2665,15 @@ static __poll_t unix_poll_mask(struct socket *sock, __poll_t events) return mask; } -static __poll_t unix_dgram_poll_mask(struct socket *sock, __poll_t events) +static __poll_t unix_dgram_poll(struct file *file, struct socket *sock, + poll_table *wait) { struct sock *sk = sock->sk, *other; - int writable; - __poll_t mask = 0; + unsigned int writable; + __poll_t mask; + + sock_poll_wait(file, sk_sleep(sk), wait); + mask = 0; /* exceptional events? */ if (sk->sk_err || !skb_queue_empty(&sk->sk_error_queue)) @@ -2691,7 +2699,7 @@ static __poll_t unix_dgram_poll_mask(struct socket *sock, __poll_t events) } /* No write status requested, avoid expensive OUT tests. */ - if (!(events & (EPOLLWRBAND|EPOLLWRNORM|EPOLLOUT))) + if (!(poll_requested_events(wait) & (EPOLLWRBAND|EPOLLWRNORM|EPOLLOUT))) return mask; writable = unix_writable(sk); diff --git a/net/vmw_vsock/af_vsock.c b/net/vmw_vsock/af_vsock.c index bb5d5fa68c35..c1076c19b858 100644 --- a/net/vmw_vsock/af_vsock.c +++ b/net/vmw_vsock/af_vsock.c @@ -850,11 +850,18 @@ static int vsock_shutdown(struct socket *sock, int mode) return err; } -static __poll_t vsock_poll_mask(struct socket *sock, __poll_t events) +static __poll_t vsock_poll(struct file *file, struct socket *sock, + poll_table *wait) { - struct sock *sk = sock->sk; - struct vsock_sock *vsk = vsock_sk(sk); - __poll_t mask = 0; + struct sock *sk; + __poll_t mask; + struct vsock_sock *vsk; + + sk = sock->sk; + vsk = vsock_sk(sk); + + poll_wait(file, sk_sleep(sk), wait); + mask = 0; if (sk->sk_err) /* Signify that there has been an error on this socket. */ @@ -1084,7 +1091,7 @@ static const struct proto_ops vsock_dgram_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = vsock_getname, - .poll_mask = vsock_poll_mask, + .poll = vsock_poll, .ioctl = sock_no_ioctl, .listen = sock_no_listen, .shutdown = vsock_shutdown, @@ -1842,7 +1849,7 @@ static const struct proto_ops vsock_stream_ops = { .socketpair = sock_no_socketpair, .accept = vsock_accept, .getname = vsock_getname, - .poll_mask = vsock_poll_mask, + .poll = vsock_poll, .ioctl = sock_no_ioctl, .listen = vsock_listen, .shutdown = vsock_shutdown, diff --git a/net/vmw_vsock/virtio_transport.c b/net/vmw_vsock/virtio_transport.c index 8e03bd3f3668..5d3cce9e8744 100644 --- a/net/vmw_vsock/virtio_transport.c +++ b/net/vmw_vsock/virtio_transport.c @@ -201,7 +201,7 @@ virtio_transport_send_pkt(struct virtio_vsock_pkt *pkt) return -ENODEV; } - if (le32_to_cpu(pkt->hdr.dst_cid) == vsock->guest_cid) + if (le64_to_cpu(pkt->hdr.dst_cid) == vsock->guest_cid) return virtio_transport_send_pkt_loopback(vsock, pkt); if (pkt->reply) diff --git a/net/x25/af_x25.c b/net/x25/af_x25.c index f93365ae0fdd..d49aa79b7997 100644 --- a/net/x25/af_x25.c +++ b/net/x25/af_x25.c @@ -1750,7 +1750,7 @@ static const struct proto_ops x25_proto_ops = { .socketpair = sock_no_socketpair, .accept = x25_accept, .getname = x25_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = x25_ioctl, #ifdef CONFIG_COMPAT .compat_ioctl = compat_x25_ioctl, diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c index 36919a254ba3..59fb7d3c36a3 100644 --- a/net/xdp/xsk.c +++ b/net/xdp/xsk.c @@ -118,6 +118,9 @@ int xsk_generic_rcv(struct xdp_sock *xs, struct xdp_buff *xdp) u64 addr; int err; + if (xs->dev != xdp->rxq->dev || xs->queue_id != xdp->rxq->queue_index) + return -EINVAL; + if (!xskq_peek_addr(xs->umem->fq, &addr) || len > xs->umem->chunk_size_nohr) { xs->rx_dropped++; @@ -300,9 +303,10 @@ static int xsk_sendmsg(struct socket *sock, struct msghdr *m, size_t total_len) return (xs->zc) ? xsk_zc_xmit(sk) : xsk_generic_xmit(sk, m, total_len); } -static __poll_t xsk_poll_mask(struct socket *sock, __poll_t events) +static unsigned int xsk_poll(struct file *file, struct socket *sock, + struct poll_table_struct *wait) { - __poll_t mask = datagram_poll_mask(sock, events); + unsigned int mask = datagram_poll(file, sock, wait); struct sock *sk = sock->sk; struct xdp_sock *xs = xdp_sk(sk); @@ -693,7 +697,7 @@ static const struct proto_ops xsk_proto_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = sock_no_getname, - .poll_mask = xsk_poll_mask, + .poll = xsk_poll, .ioctl = sock_no_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, diff --git a/scripts/Makefile.build b/scripts/Makefile.build index 34d9e9ce97c2..e7889f486ca1 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -239,6 +239,7 @@ cmd_record_mcount = \ "$(CC_FLAGS_FTRACE)" ]; then \ $(sub_cmd_record_mcount) \ fi; +endif # -record-mcount endif # CONFIG_FTRACE_MCOUNT_RECORD ifdef CONFIG_STACK_VALIDATION @@ -263,7 +264,6 @@ ifneq ($(RETPOLINE_CFLAGS),) objtool_args += --retpoline endif endif -endif ifdef CONFIG_MODVERSIONS diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index e3b7362b0ee4..a9c05506e325 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -2606,12 +2606,6 @@ sub process { "A patch subject line should describe the change not the tool that found it\n" . $herecurr); } -# Check for old stable address - if ($line =~ /^\s*cc:\s*.*<?\bstable\@kernel\.org\b>?.*$/i) { - ERROR("STABLE_ADDRESS", - "The 'stable' address should be 'stable\@vger.kernel.org'\n" . $herecurr); - } - # Check for unwanted Gerrit info if ($in_commit_log && $line =~ /^\s*change-id:/i) { ERROR("GERRIT_CHANGE_ID", diff --git a/scripts/gcc-x86_64-has-stack-protector.sh b/scripts/gcc-x86_64-has-stack-protector.sh index 3755af0cd9f7..75e4e22b986a 100755 --- a/scripts/gcc-x86_64-has-stack-protector.sh +++ b/scripts/gcc-x86_64-has-stack-protector.sh @@ -1,4 +1,4 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0 -echo "int foo(void) { char X[200]; return 3; }" | $* -S -x c -c -O0 -mcmodel=kernel -fno-PIE -fstack-protector - -o - 2> /dev/null | grep -q "%gs" +echo "int foo(void) { char X[200]; return 3; }" | $* -S -x c -c -m64 -O0 -mcmodel=kernel -fno-PIE -fstack-protector - -o - 2> /dev/null | grep -q "%gs" diff --git a/scripts/kconfig/expr.h b/scripts/kconfig/expr.h index 94a383b21df6..f63b41b0dd49 100644 --- a/scripts/kconfig/expr.h +++ b/scripts/kconfig/expr.h @@ -171,6 +171,9 @@ struct symbol { * config BAZ * int "BAZ Value" * range 1..255 + * + * Please, also check zconf.y:print_symbol() when modifying the + * list of property types! */ enum prop_type { P_UNKNOWN, diff --git a/scripts/kconfig/preprocess.c b/scripts/kconfig/preprocess.c index 65da87fce907..5ca2df790d3c 100644 --- a/scripts/kconfig/preprocess.c +++ b/scripts/kconfig/preprocess.c @@ -156,7 +156,7 @@ static char *do_shell(int argc, char *argv[]) nread--; /* remove trailing new lines */ - while (buf[nread - 1] == '\n') + while (nread > 0 && buf[nread - 1] == '\n') nread--; buf[nread] = 0; diff --git a/scripts/kconfig/zconf.y b/scripts/kconfig/zconf.y index 6f9b0aa32a82..4b68272ebdb9 100644 --- a/scripts/kconfig/zconf.y +++ b/scripts/kconfig/zconf.y @@ -31,7 +31,7 @@ struct symbol *symbol_hash[SYMBOL_HASHSIZE]; static struct menu *current_menu, *current_entry; %} -%expect 32 +%expect 31 %union { @@ -337,7 +337,7 @@ choice_block: /* if entry */ -if_entry: T_IF expr nl +if_entry: T_IF expr T_EOL { printd(DEBUG_PARSE, "%s:%d:if\n", zconf_curname(), zconf_lineno()); menu_add_entry(NULL); @@ -717,6 +717,10 @@ static void print_symbol(FILE *out, struct menu *menu) print_quoted_string(out, prop->text); fputc('\n', out); break; + case P_SYMBOL: + fputs( " symbol ", out); + fprintf(out, "%s\n", prop->sym->name); + break; default: fprintf(out, " unknown prop %d!\n", prop->type); break; diff --git a/security/keys/dh.c b/security/keys/dh.c index f7403821db7f..b203f7758f97 100644 --- a/security/keys/dh.c +++ b/security/keys/dh.c @@ -142,6 +142,8 @@ static void kdf_dealloc(struct kdf_sdesc *sdesc) * The src pointer is defined as Z || other info where Z is the shared secret * from DH and other info is an arbitrary string (see SP800-56A section * 5.8.1.2). + * + * 'dlen' must be a multiple of the digest size. */ static int kdf_ctr(struct kdf_sdesc *sdesc, const u8 *src, unsigned int slen, u8 *dst, unsigned int dlen, unsigned int zlen) @@ -205,8 +207,8 @@ static int keyctl_dh_compute_kdf(struct kdf_sdesc *sdesc, { uint8_t *outbuf = NULL; int ret; - size_t outbuf_len = round_up(buflen, - crypto_shash_digestsize(sdesc->shash.tfm)); + size_t outbuf_len = roundup(buflen, + crypto_shash_digestsize(sdesc->shash.tfm)); outbuf = kmalloc(outbuf_len, GFP_KERNEL); if (!outbuf) { diff --git a/security/selinux/selinuxfs.c b/security/selinux/selinuxfs.c index f3d374d2ca04..79d3709b0671 100644 --- a/security/selinux/selinuxfs.c +++ b/security/selinux/selinuxfs.c @@ -441,22 +441,16 @@ static int sel_release_policy(struct inode *inode, struct file *filp) static ssize_t sel_read_policy(struct file *filp, char __user *buf, size_t count, loff_t *ppos) { - struct selinux_fs_info *fsi = file_inode(filp)->i_sb->s_fs_info; struct policy_load_memory *plm = filp->private_data; int ret; - mutex_lock(&fsi->mutex); - ret = avc_has_perm(&selinux_state, current_sid(), SECINITSID_SECURITY, SECCLASS_SECURITY, SECURITY__READ_POLICY, NULL); if (ret) - goto out; + return ret; - ret = simple_read_from_buffer(buf, count, ppos, plm->data, plm->len); -out: - mutex_unlock(&fsi->mutex); - return ret; + return simple_read_from_buffer(buf, count, ppos, plm->data, plm->len); } static vm_fault_t sel_mmap_policy_fault(struct vm_fault *vmf) @@ -1188,25 +1182,29 @@ static ssize_t sel_read_bool(struct file *filep, char __user *buf, ret = -EINVAL; if (index >= fsi->bool_num || strcmp(name, fsi->bool_pending_names[index])) - goto out; + goto out_unlock; ret = -ENOMEM; page = (char *)get_zeroed_page(GFP_KERNEL); if (!page) - goto out; + goto out_unlock; cur_enforcing = security_get_bool_value(fsi->state, index); if (cur_enforcing < 0) { ret = cur_enforcing; - goto out; + goto out_unlock; } length = scnprintf(page, PAGE_SIZE, "%d %d", cur_enforcing, fsi->bool_pending_values[index]); - ret = simple_read_from_buffer(buf, count, ppos, page, length); -out: mutex_unlock(&fsi->mutex); + ret = simple_read_from_buffer(buf, count, ppos, page, length); +out_free: free_page((unsigned long)page); return ret; + +out_unlock: + mutex_unlock(&fsi->mutex); + goto out_free; } static ssize_t sel_write_bool(struct file *filep, const char __user *buf, @@ -1219,6 +1217,17 @@ static ssize_t sel_write_bool(struct file *filep, const char __user *buf, unsigned index = file_inode(filep)->i_ino & SEL_INO_MASK; const char *name = filep->f_path.dentry->d_name.name; + if (count >= PAGE_SIZE) + return -ENOMEM; + + /* No partial writes. */ + if (*ppos != 0) + return -EINVAL; + + page = memdup_user_nul(buf, count); + if (IS_ERR(page)) + return PTR_ERR(page); + mutex_lock(&fsi->mutex); length = avc_has_perm(&selinux_state, @@ -1233,22 +1242,6 @@ static ssize_t sel_write_bool(struct file *filep, const char __user *buf, fsi->bool_pending_names[index])) goto out; - length = -ENOMEM; - if (count >= PAGE_SIZE) - goto out; - - /* No partial writes. */ - length = -EINVAL; - if (*ppos != 0) - goto out; - - page = memdup_user_nul(buf, count); - if (IS_ERR(page)) { - length = PTR_ERR(page); - page = NULL; - goto out; - } - length = -EINVAL; if (sscanf(page, "%d", &new_value) != 1) goto out; @@ -1280,6 +1273,17 @@ static ssize_t sel_commit_bools_write(struct file *filep, ssize_t length; int new_value; + if (count >= PAGE_SIZE) + return -ENOMEM; + + /* No partial writes. */ + if (*ppos != 0) + return -EINVAL; + + page = memdup_user_nul(buf, count); + if (IS_ERR(page)) + return PTR_ERR(page); + mutex_lock(&fsi->mutex); length = avc_has_perm(&selinux_state, @@ -1289,22 +1293,6 @@ static ssize_t sel_commit_bools_write(struct file *filep, if (length) goto out; - length = -ENOMEM; - if (count >= PAGE_SIZE) - goto out; - - /* No partial writes. */ - length = -EINVAL; - if (*ppos != 0) - goto out; - - page = memdup_user_nul(buf, count); - if (IS_ERR(page)) { - length = PTR_ERR(page); - page = NULL; - goto out; - } - length = -EINVAL; if (sscanf(page, "%d", &new_value) != 1) goto out; diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c index 7ad226018f51..19de675d4504 100644 --- a/security/smack/smack_lsm.c +++ b/security/smack/smack_lsm.c @@ -2296,6 +2296,7 @@ static void smack_task_to_inode(struct task_struct *p, struct inode *inode) struct smack_known *skp = smk_of_task_struct(p); isp->smk_inode = skp; + isp->smk_flags |= SMK_INODE_INSTANT; } /* diff --git a/sound/core/seq/seq_clientmgr.c b/sound/core/seq/seq_clientmgr.c index 61a07fe34cd2..56ca78423040 100644 --- a/sound/core/seq/seq_clientmgr.c +++ b/sound/core/seq/seq_clientmgr.c @@ -2004,7 +2004,8 @@ static int snd_seq_ioctl_query_next_client(struct snd_seq_client *client, struct snd_seq_client *cptr = NULL; /* search for next client */ - info->client++; + if (info->client < INT_MAX) + info->client++; if (info->client < 0) info->client = 0; for (; info->client < SNDRV_SEQ_MAX_CLIENTS; info->client++) { diff --git a/sound/core/timer.c b/sound/core/timer.c index 665089c45560..b6f076bbc72d 100644 --- a/sound/core/timer.c +++ b/sound/core/timer.c @@ -1520,7 +1520,7 @@ static int snd_timer_user_next_device(struct snd_timer_id __user *_tid) } else { if (id.subdevice < 0) id.subdevice = 0; - else + else if (id.subdevice < INT_MAX) id.subdevice++; } } diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index d91c87e41756..20a171ac4bb2 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -2899,8 +2899,9 @@ static int hda_codec_runtime_suspend(struct device *dev) list_for_each_entry(pcm, &codec->pcm_list_head, list) snd_pcm_suspend_all(pcm->pcm); state = hda_call_codec_suspend(codec); - if (codec_has_clkstop(codec) && codec_has_epss(codec) && - (state & AC_PWRST_CLK_STOP_OK)) + if (codec->link_down_at_suspend || + (codec_has_clkstop(codec) && codec_has_epss(codec) && + (state & AC_PWRST_CLK_STOP_OK))) snd_hdac_codec_link_down(&codec->core); snd_hdac_link_power(&codec->core, false); return 0; diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h index 681c360f29f9..a8b1b31f161c 100644 --- a/sound/pci/hda/hda_codec.h +++ b/sound/pci/hda/hda_codec.h @@ -258,6 +258,7 @@ struct hda_codec { unsigned int power_save_node:1; /* advanced PM for each widget */ unsigned int auto_runtime_pm:1; /* enable automatic codec runtime pm */ unsigned int force_pin_prefix:1; /* Add location prefix */ + unsigned int link_down_at_suspend:1; /* link down at runtime suspend */ #ifdef CONFIG_PM unsigned long power_on_acct; unsigned long power_off_acct; diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 04e949aa01ad..4ff5320378e2 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -991,6 +991,7 @@ struct ca0132_spec { enum { QUIRK_NONE, QUIRK_ALIENWARE, + QUIRK_ALIENWARE_M17XR4, QUIRK_SBZ, QUIRK_R3DI, }; @@ -1040,6 +1041,7 @@ static const struct hda_pintbl r3di_pincfgs[] = { }; static const struct snd_pci_quirk ca0132_quirks[] = { + SND_PCI_QUIRK(0x1028, 0x057b, "Alienware M17x R4", QUIRK_ALIENWARE_M17XR4), SND_PCI_QUIRK(0x1028, 0x0685, "Alienware 15 2015", QUIRK_ALIENWARE), SND_PCI_QUIRK(0x1028, 0x0688, "Alienware 17 2015", QUIRK_ALIENWARE), SND_PCI_QUIRK(0x1028, 0x0708, "Alienware 15 R2 2016", QUIRK_ALIENWARE), @@ -5663,7 +5665,7 @@ static const char * const ca0132_alt_slave_pfxs[] = { * I think this has to do with the pin for rear surround being 0x11, * and the center/lfe being 0x10. Usually the pin order is the opposite. */ -const struct snd_pcm_chmap_elem ca0132_alt_chmaps[] = { +static const struct snd_pcm_chmap_elem ca0132_alt_chmaps[] = { { .channels = 2, .map = { SNDRV_CHMAP_FL, SNDRV_CHMAP_FR } }, { .channels = 4, @@ -5966,7 +5968,7 @@ static int ca0132_build_pcms(struct hda_codec *codec) info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adcs[0]; /* With the DSP enabled, desktops don't use this ADC. */ - if (spec->use_alt_functions) { + if (!spec->use_alt_functions) { info = snd_hda_codec_pcm_new(codec, "CA0132 Analog Mic-In2"); if (!info) return -ENOMEM; @@ -6130,7 +6132,10 @@ static void ca0132_init_dmic(struct hda_codec *codec) * Bit 6: set to select Data2, clear for Data1 * Bit 7: set to enable DMic, clear for AMic */ - val = 0x23; + if (spec->quirk == QUIRK_ALIENWARE_M17XR4) + val = 0x33; + else + val = 0x23; /* keep a copy of dmic ctl val for enable/disable dmic purpuse */ spec->dmic_ctl = val; snd_hda_codec_write(codec, spec->input_pins[0], 0, @@ -7223,7 +7228,7 @@ static int ca0132_init(struct hda_codec *codec) snd_hda_sequence_write(codec, spec->base_init_verbs); - if (spec->quirk != QUIRK_NONE) + if (spec->use_alt_functions) ca0132_alt_init(codec); ca0132_download_dsp(codec); @@ -7237,8 +7242,9 @@ static int ca0132_init(struct hda_codec *codec) case QUIRK_R3DI: r3di_setup_defaults(codec); break; - case QUIRK_NONE: - case QUIRK_ALIENWARE: + case QUIRK_SBZ: + break; + default: ca0132_setup_defaults(codec); ca0132_init_analog_mic2(codec); ca0132_init_dmic(codec); @@ -7343,7 +7349,6 @@ static const struct hda_codec_ops ca0132_patch_ops = { static void ca0132_config(struct hda_codec *codec) { struct ca0132_spec *spec = codec->spec; - struct auto_pin_cfg *cfg = &spec->autocfg; spec->dacs[0] = 0x2; spec->dacs[1] = 0x3; @@ -7405,12 +7410,7 @@ static void ca0132_config(struct hda_codec *codec) /* SPDIF I/O */ spec->dig_out = 0x05; spec->multiout.dig_out_nid = spec->dig_out; - cfg->dig_out_pins[0] = 0x0c; - cfg->dig_outs = 1; - cfg->dig_out_type[0] = HDA_PCM_TYPE_SPDIF; spec->dig_in = 0x09; - cfg->dig_in_pin = 0x0e; - cfg->dig_in_type = HDA_PCM_TYPE_SPDIF; break; case QUIRK_R3DI: codec_dbg(codec, "%s: QUIRK_R3DI applied.\n", __func__); @@ -7438,9 +7438,6 @@ static void ca0132_config(struct hda_codec *codec) /* SPDIF I/O */ spec->dig_out = 0x05; spec->multiout.dig_out_nid = spec->dig_out; - cfg->dig_out_pins[0] = 0x0c; - cfg->dig_outs = 1; - cfg->dig_out_type[0] = HDA_PCM_TYPE_SPDIF; break; default: spec->num_outputs = 2; @@ -7463,12 +7460,7 @@ static void ca0132_config(struct hda_codec *codec) /* SPDIF I/O */ spec->dig_out = 0x05; spec->multiout.dig_out_nid = spec->dig_out; - cfg->dig_out_pins[0] = 0x0c; - cfg->dig_outs = 1; - cfg->dig_out_type[0] = HDA_PCM_TYPE_SPDIF; spec->dig_in = 0x09; - cfg->dig_in_pin = 0x0e; - cfg->dig_in_type = HDA_PCM_TYPE_SPDIF; break; } } @@ -7476,7 +7468,7 @@ static void ca0132_config(struct hda_codec *codec) static int ca0132_prepare_verbs(struct hda_codec *codec) { /* Verbs + terminator (an empty element) */ -#define NUM_SPEC_VERBS 4 +#define NUM_SPEC_VERBS 2 struct ca0132_spec *spec = codec->spec; spec->chip_init_verbs = ca0132_init_verbs0; @@ -7488,34 +7480,24 @@ static int ca0132_prepare_verbs(struct hda_codec *codec) if (!spec->spec_init_verbs) return -ENOMEM; - /* HP jack autodetection */ - spec->spec_init_verbs[0].nid = spec->unsol_tag_hp; - spec->spec_init_verbs[0].param = AC_VERB_SET_UNSOLICITED_ENABLE; - spec->spec_init_verbs[0].verb = AC_USRSP_EN | spec->unsol_tag_hp; - - /* MIC1 jack autodetection */ - spec->spec_init_verbs[1].nid = spec->unsol_tag_amic1; - spec->spec_init_verbs[1].param = AC_VERB_SET_UNSOLICITED_ENABLE; - spec->spec_init_verbs[1].verb = AC_USRSP_EN | spec->unsol_tag_amic1; - /* config EAPD */ - spec->spec_init_verbs[2].nid = 0x0b; - spec->spec_init_verbs[2].param = 0x78D; - spec->spec_init_verbs[2].verb = 0x00; + spec->spec_init_verbs[0].nid = 0x0b; + spec->spec_init_verbs[0].param = 0x78D; + spec->spec_init_verbs[0].verb = 0x00; /* Previously commented configuration */ /* - spec->spec_init_verbs[3].nid = 0x0b; - spec->spec_init_verbs[3].param = AC_VERB_SET_EAPD_BTLENABLE; + spec->spec_init_verbs[2].nid = 0x0b; + spec->spec_init_verbs[2].param = AC_VERB_SET_EAPD_BTLENABLE; + spec->spec_init_verbs[2].verb = 0x02; + + spec->spec_init_verbs[3].nid = 0x10; + spec->spec_init_verbs[3].param = 0x78D; spec->spec_init_verbs[3].verb = 0x02; spec->spec_init_verbs[4].nid = 0x10; - spec->spec_init_verbs[4].param = 0x78D; + spec->spec_init_verbs[4].param = AC_VERB_SET_EAPD_BTLENABLE; spec->spec_init_verbs[4].verb = 0x02; - - spec->spec_init_verbs[5].nid = 0x10; - spec->spec_init_verbs[5].param = AC_VERB_SET_EAPD_BTLENABLE; - spec->spec_init_verbs[5].verb = 0x02; */ /* Terminator: spec->spec_init_verbs[NUM_SPEC_VERBS-1] */ diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 8840daf9c6a3..98e1c411c56a 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -3741,6 +3741,11 @@ static int patch_atihdmi(struct hda_codec *codec) spec->chmap.channels_max = max(spec->chmap.channels_max, 8u); + /* AMD GPUs have neither EPSS nor CLKSTOP bits, hence preventing + * the link-down as is. Tell the core to allow it. + */ + codec->link_down_at_suspend = 1; + return 0; } diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index e9bd33ea538f..5ad6c7e5f92e 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2545,6 +2545,7 @@ static const struct snd_pci_quirk alc262_fixup_tbl[] = { SND_PCI_QUIRK(0x10cf, 0x1397, "Fujitsu Lifebook S7110", ALC262_FIXUP_FSC_S7110), SND_PCI_QUIRK(0x10cf, 0x142d, "Fujitsu Lifebook E8410", ALC262_FIXUP_BENQ), SND_PCI_QUIRK(0x10f1, 0x2915, "Tyan Thunder n6650W", ALC262_FIXUP_TYAN), + SND_PCI_QUIRK(0x1734, 0x1141, "FSC ESPRIMO U9210", ALC262_FIXUP_FSC_H270), SND_PCI_QUIRK(0x1734, 0x1147, "FSC Celsius H270", ALC262_FIXUP_FSC_H270), SND_PCI_QUIRK(0x17aa, 0x384e, "Lenovo 3000", ALC262_FIXUP_LENOVO_3000), SND_PCI_QUIRK(0x17ff, 0x0560, "Benq ED8", ALC262_FIXUP_BENQ), @@ -4995,7 +4996,6 @@ static void alc_fixup_tpt440_dock(struct hda_codec *codec, struct alc_spec *spec = codec->spec; if (action == HDA_FIXUP_ACT_PRE_PROBE) { - spec->shutup = alc_no_shutup; /* reduce click noise */ spec->reboot_notify = alc_d3_at_reboot; /* reduce noise */ spec->parse_flags = HDA_PINCFG_NO_HP_FIXUP; codec->power_save_node = 0; /* avoid click noises */ @@ -5394,6 +5394,13 @@ static void alc274_fixup_bind_dacs(struct hda_codec *codec, /* for hda_fixup_thinkpad_acpi() */ #include "thinkpad_helper.c" +static void alc_fixup_thinkpad_acpi(struct hda_codec *codec, + const struct hda_fixup *fix, int action) +{ + alc_fixup_no_shutup(codec, fix, action); /* reduce click noise */ + hda_fixup_thinkpad_acpi(codec, fix, action); +} + /* for dell wmi mic mute led */ #include "dell_wmi_helper.c" @@ -5946,7 +5953,7 @@ static const struct hda_fixup alc269_fixups[] = { }, [ALC269_FIXUP_THINKPAD_ACPI] = { .type = HDA_FIXUP_FUNC, - .v.func = hda_fixup_thinkpad_acpi, + .v.func = alc_fixup_thinkpad_acpi, .chained = true, .chain_id = ALC269_FIXUP_SKU_IGNORE, }, @@ -6603,8 +6610,9 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x30bb, "ThinkCentre AIO", ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY), SND_PCI_QUIRK(0x17aa, 0x30e2, "ThinkCentre AIO", ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY), SND_PCI_QUIRK(0x17aa, 0x310c, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION), + SND_PCI_QUIRK(0x17aa, 0x312a, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION), SND_PCI_QUIRK(0x17aa, 0x312f, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION), - SND_PCI_QUIRK(0x17aa, 0x3138, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION), + SND_PCI_QUIRK(0x17aa, 0x3136, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION), SND_PCI_QUIRK(0x17aa, 0x313c, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION), SND_PCI_QUIRK(0x17aa, 0x3902, "Lenovo E50-80", ALC269_FIXUP_DMIC_THINKPAD_ACPI), SND_PCI_QUIRK(0x17aa, 0x3977, "IdeaPad S210", ALC283_FIXUP_INT_MIC), @@ -6782,6 +6790,12 @@ static const struct snd_hda_pin_quirk alc269_pin_fixup_tbl[] = { {0x14, 0x90170110}, {0x19, 0x02a11030}, {0x21, 0x02211020}), + SND_HDA_PIN_QUIRK(0x10ec0235, 0x17aa, "Lenovo", ALC294_FIXUP_LENOVO_MIC_LOCATION, + {0x14, 0x90170110}, + {0x19, 0x02a11030}, + {0x1a, 0x02a11040}, + {0x1b, 0x01014020}, + {0x21, 0x0221101f}), SND_HDA_PIN_QUIRK(0x10ec0236, 0x1028, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE, {0x12, 0x90a60140}, {0x14, 0x90170110}, diff --git a/sound/pci/lx6464es/lx6464es.c b/sound/pci/lx6464es/lx6464es.c index 6c85f13ab23f..54f6252faca6 100644 --- a/sound/pci/lx6464es/lx6464es.c +++ b/sound/pci/lx6464es/lx6464es.c @@ -1018,6 +1018,7 @@ static int snd_lx6464es_create(struct snd_card *card, chip->port_dsp_bar = pci_ioremap_bar(pci, 2); if (!chip->port_dsp_bar) { dev_err(card->dev, "cannot remap PCI memory region\n"); + err = -ENOMEM; goto remap_pci_failed; } diff --git a/tools/arch/arm/include/uapi/asm/kvm.h b/tools/arch/arm/include/uapi/asm/kvm.h index caae4843cb70..16e006f708ca 100644 --- a/tools/arch/arm/include/uapi/asm/kvm.h +++ b/tools/arch/arm/include/uapi/asm/kvm.h @@ -91,6 +91,7 @@ struct kvm_regs { #define KVM_VGIC_V3_ADDR_TYPE_DIST 2 #define KVM_VGIC_V3_ADDR_TYPE_REDIST 3 #define KVM_VGIC_ITS_ADDR_TYPE 4 +#define KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION 5 #define KVM_VGIC_V3_DIST_SIZE SZ_64K #define KVM_VGIC_V3_REDIST_SIZE (2 * SZ_64K) diff --git a/tools/arch/arm64/include/uapi/asm/kvm.h b/tools/arch/arm64/include/uapi/asm/kvm.h index 04b3256f8e6d..4e76630dd655 100644 --- a/tools/arch/arm64/include/uapi/asm/kvm.h +++ b/tools/arch/arm64/include/uapi/asm/kvm.h @@ -91,6 +91,7 @@ struct kvm_regs { #define KVM_VGIC_V3_ADDR_TYPE_DIST 2 #define KVM_VGIC_V3_ADDR_TYPE_REDIST 3 #define KVM_VGIC_ITS_ADDR_TYPE 4 +#define KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION 5 #define KVM_VGIC_V3_DIST_SIZE SZ_64K #define KVM_VGIC_V3_REDIST_SIZE (2 * SZ_64K) diff --git a/tools/arch/powerpc/include/uapi/asm/kvm.h b/tools/arch/powerpc/include/uapi/asm/kvm.h index 833ed9a16adf..1b32b56a03d3 100644 --- a/tools/arch/powerpc/include/uapi/asm/kvm.h +++ b/tools/arch/powerpc/include/uapi/asm/kvm.h @@ -633,6 +633,7 @@ struct kvm_ppc_cpu_char { #define KVM_REG_PPC_PSSCR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xbd) #define KVM_REG_PPC_DEC_EXPIRY (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xbe) +#define KVM_REG_PPC_ONLINE (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0xbf) /* Transactional Memory checkpointed state: * This is all GPRs, all VSX regs and a subset of SPRs diff --git a/tools/arch/powerpc/include/uapi/asm/unistd.h b/tools/arch/powerpc/include/uapi/asm/unistd.h index 389c36fd8299..ac5ba55066dd 100644 --- a/tools/arch/powerpc/include/uapi/asm/unistd.h +++ b/tools/arch/powerpc/include/uapi/asm/unistd.h @@ -398,5 +398,6 @@ #define __NR_pkey_alloc 384 #define __NR_pkey_free 385 #define __NR_pkey_mprotect 386 +#define __NR_rseq 387 #endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */ diff --git a/tools/arch/x86/include/asm/cpufeatures.h b/tools/arch/x86/include/asm/cpufeatures.h index fb00a2fca990..5701f5cecd31 100644 --- a/tools/arch/x86/include/asm/cpufeatures.h +++ b/tools/arch/x86/include/asm/cpufeatures.h @@ -282,7 +282,9 @@ #define X86_FEATURE_AMD_IBPB (13*32+12) /* "" Indirect Branch Prediction Barrier */ #define X86_FEATURE_AMD_IBRS (13*32+14) /* "" Indirect Branch Restricted Speculation */ #define X86_FEATURE_AMD_STIBP (13*32+15) /* "" Single Thread Indirect Branch Predictors */ +#define X86_FEATURE_AMD_SSBD (13*32+24) /* "" Speculative Store Bypass Disable */ #define X86_FEATURE_VIRT_SSBD (13*32+25) /* Virtualized Speculative Store Bypass Disable */ +#define X86_FEATURE_AMD_SSB_NO (13*32+26) /* "" Speculative Store Bypass is fixed in hardware. */ /* Thermal and Power Management Leaf, CPUID level 0x00000006 (EAX), word 14 */ #define X86_FEATURE_DTHERM (14*32+ 0) /* Digital Thermal Sensor */ diff --git a/tools/bpf/bpftool/perf.c b/tools/bpf/bpftool/perf.c index ac6b1a12c9b7..b76b77dcfd1f 100644 --- a/tools/bpf/bpftool/perf.c +++ b/tools/bpf/bpftool/perf.c @@ -29,9 +29,10 @@ static bool has_perf_query_support(void) if (perf_query_supported) goto out; - fd = open(bin_name, O_RDONLY); + fd = open("/", O_RDONLY); if (fd < 0) { - p_err("perf_query_support: %s", strerror(errno)); + p_err("perf_query_support: cannot open directory \"/\" (%s)", + strerror(errno)); goto out; } diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c index a4f435203fef..05f42a46d6ed 100644 --- a/tools/bpf/bpftool/prog.c +++ b/tools/bpf/bpftool/prog.c @@ -90,7 +90,9 @@ static void print_boot_time(__u64 nsecs, char *buf, unsigned int size) } wallclock_secs = (real_time_ts.tv_sec - boot_time_ts.tv_sec) + - nsecs / 1000000000; + (real_time_ts.tv_nsec - boot_time_ts.tv_nsec + nsecs) / + 1000000000; + if (!localtime_r(&wallclock_secs, &load_tm)) { snprintf(buf, size, "%llu", nsecs / 1000000000); diff --git a/tools/include/uapi/drm/drm.h b/tools/include/uapi/drm/drm.h index 6fdff5945c8a..9c660e1688ab 100644 --- a/tools/include/uapi/drm/drm.h +++ b/tools/include/uapi/drm/drm.h @@ -680,6 +680,13 @@ struct drm_get_cap { */ #define DRM_CLIENT_CAP_ATOMIC 3 +/** + * DRM_CLIENT_CAP_ASPECT_RATIO + * + * If set to 1, the DRM core will provide aspect ratio information in modes. + */ +#define DRM_CLIENT_CAP_ASPECT_RATIO 4 + /** DRM_IOCTL_SET_CLIENT_CAP ioctl argument type */ struct drm_set_client_cap { __u64 capability; diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h index e0b06784f227..59b19b6a40d7 100644 --- a/tools/include/uapi/linux/bpf.h +++ b/tools/include/uapi/linux/bpf.h @@ -2630,7 +2630,7 @@ struct bpf_fib_lookup { union { /* inputs to lookup */ __u8 tos; /* AF_INET */ - __be32 flowlabel; /* AF_INET6 */ + __be32 flowinfo; /* AF_INET6, flow_label + priority */ /* output: metric of fib result (IPv4/IPv6 only) */ __u32 rt_metric; diff --git a/tools/include/uapi/linux/if_link.h b/tools/include/uapi/linux/if_link.h index 68699f654118..cf01b6824244 100644 --- a/tools/include/uapi/linux/if_link.h +++ b/tools/include/uapi/linux/if_link.h @@ -333,6 +333,7 @@ enum { IFLA_BRPORT_BCAST_FLOOD, IFLA_BRPORT_GROUP_FWD_MASK, IFLA_BRPORT_NEIGH_SUPPRESS, + IFLA_BRPORT_ISOLATED, __IFLA_BRPORT_MAX }; #define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1) @@ -516,6 +517,7 @@ enum { IFLA_VXLAN_COLLECT_METADATA, IFLA_VXLAN_LABEL, IFLA_VXLAN_GPE, + IFLA_VXLAN_TTL_INHERIT, __IFLA_VXLAN_MAX }; #define IFLA_VXLAN_MAX (__IFLA_VXLAN_MAX - 1) diff --git a/tools/include/uapi/linux/kvm.h b/tools/include/uapi/linux/kvm.h index 39e364c70caf..b6270a3b38e9 100644 --- a/tools/include/uapi/linux/kvm.h +++ b/tools/include/uapi/linux/kvm.h @@ -948,6 +948,7 @@ struct kvm_ppc_resize_hpt { #define KVM_CAP_S390_BPB 152 #define KVM_CAP_GET_MSR_FEATURES 153 #define KVM_CAP_HYPERV_EVENTFD 154 +#define KVM_CAP_HYPERV_TLBFLUSH 155 #ifdef KVM_CAP_IRQ_ROUTING diff --git a/tools/objtool/check.c b/tools/objtool/check.c index 38047c6aa575..f4a25bd1871f 100644 --- a/tools/objtool/check.c +++ b/tools/objtool/check.c @@ -164,6 +164,7 @@ static int __dead_end_function(struct objtool_file *file, struct symbol *func, "lbug_with_loc", "fortify_panic", "usercopy_abort", + "machine_real_restart", }; if (func->bind == STB_WEAK) diff --git a/tools/perf/Documentation/perf-stat.txt b/tools/perf/Documentation/perf-stat.txt index 5dfe102fb5b5..b10a90b6a718 100644 --- a/tools/perf/Documentation/perf-stat.txt +++ b/tools/perf/Documentation/perf-stat.txt @@ -178,6 +178,9 @@ Print count deltas for fixed number of times. This option should be used together with "-I" option. example: 'perf stat -I 1000 --interval-count 2 -e cycles -a' +--interval-clear:: +Clear the screen before next interval. + --timeout msecs:: Stop the 'perf stat' session and print count deltas after N milliseconds (minimum: 10 ms). This option is not supported with the "-I" option. diff --git a/tools/perf/arch/powerpc/util/skip-callchain-idx.c b/tools/perf/arch/powerpc/util/skip-callchain-idx.c index 3598b8b75d27..ef5d59a5742e 100644 --- a/tools/perf/arch/powerpc/util/skip-callchain-idx.c +++ b/tools/perf/arch/powerpc/util/skip-callchain-idx.c @@ -243,7 +243,7 @@ int arch_skip_callchain_idx(struct thread *thread, struct ip_callchain *chain) u64 ip; u64 skip_slot = -1; - if (chain->nr < 3) + if (!chain || chain->nr < 3) return skip_slot; ip = chain->ips[2]; diff --git a/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl b/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl index 4dfe42666d0c..f0b1709a5ffb 100644 --- a/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl +++ b/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl @@ -341,6 +341,8 @@ 330 common pkey_alloc __x64_sys_pkey_alloc 331 common pkey_free __x64_sys_pkey_free 332 common statx __x64_sys_statx +333 common io_pgetevents __x64_sys_io_pgetevents +334 common rseq __x64_sys_rseq # # x32-specific system call numbers start at 512 to avoid cache impact diff --git a/tools/perf/bench/numa.c b/tools/perf/bench/numa.c index 63eb49082774..44195514b19e 100644 --- a/tools/perf/bench/numa.c +++ b/tools/perf/bench/numa.c @@ -1098,7 +1098,7 @@ static void *worker_thread(void *__tdata) u8 *global_data; u8 *process_data; u8 *thread_data; - u64 bytes_done; + u64 bytes_done, secs; long work_done; u32 l; struct rusage rusage; @@ -1254,7 +1254,8 @@ static void *worker_thread(void *__tdata) timersub(&stop, &start0, &diff); td->runtime_ns = diff.tv_sec * NSEC_PER_SEC; td->runtime_ns += diff.tv_usec * NSEC_PER_USEC; - td->speed_gbs = bytes_done / (td->runtime_ns / NSEC_PER_SEC) / 1e9; + secs = td->runtime_ns / NSEC_PER_SEC; + td->speed_gbs = secs ? bytes_done / secs / 1e9 : 0; getrusage(RUSAGE_THREAD, &rusage); td->system_time_ns = rusage.ru_stime.tv_sec * NSEC_PER_SEC; diff --git a/tools/perf/builtin-annotate.c b/tools/perf/builtin-annotate.c index 5eb22cc56363..8180319285af 100644 --- a/tools/perf/builtin-annotate.c +++ b/tools/perf/builtin-annotate.c @@ -283,6 +283,15 @@ out_put: return ret; } +static int process_feature_event(struct perf_tool *tool, + union perf_event *event, + struct perf_session *session) +{ + if (event->feat.feat_id < HEADER_LAST_FEATURE) + return perf_event__process_feature(tool, event, session); + return 0; +} + static int hist_entry__tty_annotate(struct hist_entry *he, struct perf_evsel *evsel, struct perf_annotate *ann) @@ -471,7 +480,7 @@ int cmd_annotate(int argc, const char **argv) .attr = perf_event__process_attr, .build_id = perf_event__process_build_id, .tracing_data = perf_event__process_tracing_data, - .feature = perf_event__process_feature, + .feature = process_feature_event, .ordered_events = true, .ordering_requires_timestamps = true, }, diff --git a/tools/perf/builtin-c2c.c b/tools/perf/builtin-c2c.c index 307b3594525f..6a8738f7ead3 100644 --- a/tools/perf/builtin-c2c.c +++ b/tools/perf/builtin-c2c.c @@ -56,16 +56,16 @@ struct c2c_hist_entry { struct compute_stats cstats; + unsigned long paddr; + unsigned long paddr_cnt; + bool paddr_zero; + char *nodestr; + /* * must be at the end, * because of its callchain dynamic entry */ struct hist_entry he; - - unsigned long paddr; - unsigned long paddr_cnt; - bool paddr_zero; - char *nodestr; }; static char const *coalesce_default = "pid,iaddr"; diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c index cdb5b6949832..c04dc7b53797 100644 --- a/tools/perf/builtin-report.c +++ b/tools/perf/builtin-report.c @@ -217,7 +217,8 @@ static int process_feature_event(struct perf_tool *tool, } /* - * All features are received, we can force the + * (feat_id = HEADER_LAST_FEATURE) is the end marker which + * means all features are received, now we can force the * group if needed. */ setup_forced_leader(rep, session->evlist); diff --git a/tools/perf/builtin-script.c b/tools/perf/builtin-script.c index b3bf35512d21..568ddfac3213 100644 --- a/tools/perf/builtin-script.c +++ b/tools/perf/builtin-script.c @@ -180,6 +180,18 @@ static struct { PERF_OUTPUT_EVNAME | PERF_OUTPUT_TRACE }, + [PERF_TYPE_HW_CACHE] = { + .user_set = false, + + .fields = PERF_OUTPUT_COMM | PERF_OUTPUT_TID | + PERF_OUTPUT_CPU | PERF_OUTPUT_TIME | + PERF_OUTPUT_EVNAME | PERF_OUTPUT_IP | + PERF_OUTPUT_SYM | PERF_OUTPUT_SYMOFFSET | + PERF_OUTPUT_DSO | PERF_OUTPUT_PERIOD, + + .invalid_fields = PERF_OUTPUT_TRACE | PERF_OUTPUT_BPF_OUTPUT, + }, + [PERF_TYPE_RAW] = { .user_set = false, @@ -1822,6 +1834,7 @@ static int process_attr(struct perf_tool *tool, union perf_event *event, struct perf_evlist *evlist; struct perf_evsel *evsel, *pos; int err; + static struct perf_evsel_script *es; err = perf_event__process_attr(tool, event, pevlist); if (err) @@ -1830,6 +1843,19 @@ static int process_attr(struct perf_tool *tool, union perf_event *event, evlist = *pevlist; evsel = perf_evlist__last(*pevlist); + if (!evsel->priv) { + if (scr->per_event_dump) { + evsel->priv = perf_evsel_script__new(evsel, + scr->session->data); + } else { + es = zalloc(sizeof(*es)); + if (!es) + return -ENOMEM; + es->fp = stdout; + evsel->priv = es; + } + } + if (evsel->attr.type >= PERF_TYPE_MAX && evsel->attr.type != PERF_TYPE_SYNTH) return 0; @@ -3018,6 +3044,15 @@ int process_cpu_map_event(struct perf_tool *tool __maybe_unused, return set_maps(script); } +static int process_feature_event(struct perf_tool *tool, + union perf_event *event, + struct perf_session *session) +{ + if (event->feat.feat_id < HEADER_LAST_FEATURE) + return perf_event__process_feature(tool, event, session); + return 0; +} + #ifdef HAVE_AUXTRACE_SUPPORT static int perf_script__process_auxtrace_info(struct perf_tool *tool, union perf_event *event, @@ -3062,7 +3097,7 @@ int cmd_script(int argc, const char **argv) .attr = process_attr, .event_update = perf_event__process_event_update, .tracing_data = perf_event__process_tracing_data, - .feature = perf_event__process_feature, + .feature = process_feature_event, .build_id = perf_event__process_build_id, .id_index = perf_event__process_id_index, .auxtrace_info = perf_script__process_auxtrace_info, @@ -3113,8 +3148,9 @@ int cmd_script(int argc, const char **argv) "+field to add and -field to remove." "Valid types: hw,sw,trace,raw,synth. " "Fields: comm,tid,pid,time,cpu,event,trace,ip,sym,dso," - "addr,symoff,period,iregs,uregs,brstack,brstacksym,flags," - "bpf-output,callindent,insn,insnlen,brstackinsn,synth,phys_addr", + "addr,symoff,srcline,period,iregs,uregs,brstack," + "brstacksym,flags,bpf-output,brstackinsn,brstackoff," + "callindent,insn,insnlen,synth,phys_addr,metric,misc", parse_output_fields), OPT_BOOLEAN('a', "all-cpus", &system_wide, "system-wide collection from all CPUs"), diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c index 096ccb25c11f..22547a490e1f 100644 --- a/tools/perf/builtin-stat.c +++ b/tools/perf/builtin-stat.c @@ -65,6 +65,7 @@ #include "util/tool.h" #include "util/string2.h" #include "util/metricgroup.h" +#include "util/top.h" #include "asm/bug.h" #include <linux/time64.h> @@ -144,6 +145,8 @@ static struct target target = { typedef int (*aggr_get_id_t)(struct cpu_map *m, int cpu); +#define METRIC_ONLY_LEN 20 + static int run_count = 1; static bool no_inherit = false; static volatile pid_t child_pid = -1; @@ -173,6 +176,7 @@ static struct cpu_map *aggr_map; static aggr_get_id_t aggr_get_id; static bool append_file; static bool interval_count; +static bool interval_clear; static const char *output_name; static int output_fd; static int print_free_counters_hint; @@ -180,6 +184,7 @@ static int print_mixed_hw_group_error; static u64 *walltime_run; static bool ru_display = false; static struct rusage ru_data; +static unsigned int metric_only_len = METRIC_ONLY_LEN; struct perf_stat { bool record; @@ -967,8 +972,6 @@ static void print_metric_csv(void *ctx, fprintf(out, "%s%s%s%s", csv_sep, vals, csv_sep, unit); } -#define METRIC_ONLY_LEN 20 - /* Filter out some columns that don't work well in metrics only mode */ static bool valid_only_metric(const char *unit) @@ -999,22 +1002,20 @@ static void print_metric_only(void *ctx, const char *color, const char *fmt, { struct outstate *os = ctx; FILE *out = os->fh; - int n; - char buf[1024]; - unsigned mlen = METRIC_ONLY_LEN; + char buf[1024], str[1024]; + unsigned mlen = metric_only_len; if (!valid_only_metric(unit)) return; unit = fixunit(buf, os->evsel, unit); - if (color) - n = color_fprintf(out, color, fmt, val); - else - n = fprintf(out, fmt, val); - if (n > METRIC_ONLY_LEN) - n = METRIC_ONLY_LEN; if (mlen < strlen(unit)) mlen = strlen(unit) + 1; - fprintf(out, "%*s", mlen - n, ""); + + if (color) + mlen += strlen(color) + sizeof(PERF_COLOR_RESET) - 1; + + color_snprintf(str, sizeof(str), color ?: "", fmt, val); + fprintf(out, "%*s ", mlen, str); } static void print_metric_only_csv(void *ctx, const char *color __maybe_unused, @@ -1054,7 +1055,7 @@ static void print_metric_header(void *ctx, const char *color __maybe_unused, if (csv_output) fprintf(os->fh, "%s%s", unit, csv_sep); else - fprintf(os->fh, "%-*s ", METRIC_ONLY_LEN, unit); + fprintf(os->fh, "%*s ", metric_only_len, unit); } static void nsec_printout(int id, int nr, struct perf_evsel *evsel, double avg) @@ -1704,9 +1705,12 @@ static void print_interval(char *prefix, struct timespec *ts) FILE *output = stat_config.output; static int num_print_interval; + if (interval_clear) + puts(CONSOLE_CLEAR); + sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, csv_sep); - if (num_print_interval == 0 && !csv_output) { + if ((num_print_interval == 0 && !csv_output) || interval_clear) { switch (stat_config.aggr_mode) { case AGGR_SOCKET: fprintf(output, "# time socket cpus"); @@ -1719,7 +1723,7 @@ static void print_interval(char *prefix, struct timespec *ts) fprintf(output, " counts %*s events\n", unit_width, "unit"); break; case AGGR_NONE: - fprintf(output, "# time CPU"); + fprintf(output, "# time CPU "); if (!metric_only) fprintf(output, " counts %*s events\n", unit_width, "unit"); break; @@ -1738,7 +1742,7 @@ static void print_interval(char *prefix, struct timespec *ts) } } - if (num_print_interval == 0 && metric_only) + if ((num_print_interval == 0 && metric_only) || interval_clear) print_metric_headers(" ", true); if (++num_print_interval == 25) num_print_interval = 0; @@ -2057,6 +2061,8 @@ static const struct option stat_options[] = { "(overhead is possible for values <= 100ms)"), OPT_INTEGER(0, "interval-count", &stat_config.times, "print counts for fixed number of times"), + OPT_BOOLEAN(0, "interval-clear", &interval_clear, + "clear screen in between new interval"), OPT_UINTEGER(0, "timeout", &stat_config.timeout, "stop workload and print counts after a timeout period in ms (>= 10ms)"), OPT_SET_UINT(0, "per-socket", &stat_config.aggr_mode, @@ -2436,14 +2442,13 @@ static int add_default_attributes(void) (PERF_COUNT_HW_CACHE_OP_PREFETCH << 8) | (PERF_COUNT_HW_CACHE_RESULT_MISS << 16) }, }; + struct parse_events_error errinfo; /* Set attrs if no event is selected and !null_run: */ if (null_run) return 0; if (transaction_run) { - struct parse_events_error errinfo; - if (pmu_have_event("cpu", "cycles-ct") && pmu_have_event("cpu", "el-start")) err = parse_events(evsel_list, transaction_attrs, @@ -2454,6 +2459,7 @@ static int add_default_attributes(void) &errinfo); if (err) { fprintf(stderr, "Cannot set up transaction events\n"); + parse_events_print_error(&errinfo, transaction_attrs); return -1; } return 0; @@ -2479,10 +2485,11 @@ static int add_default_attributes(void) pmu_have_event("msr", "smi")) { if (!force_metric_only) metric_only = true; - err = parse_events(evsel_list, smi_cost_attrs, NULL); + err = parse_events(evsel_list, smi_cost_attrs, &errinfo); } else { fprintf(stderr, "To measure SMI cost, it needs " "msr/aperf/, msr/smi/ and cpu/cycles/ support\n"); + parse_events_print_error(&errinfo, smi_cost_attrs); return -1; } if (err) { @@ -2517,12 +2524,13 @@ static int add_default_attributes(void) if (topdown_attrs[0] && str) { if (warn) arch_topdown_group_warn(); - err = parse_events(evsel_list, str, NULL); + err = parse_events(evsel_list, str, &errinfo); if (err) { fprintf(stderr, "Cannot set up top down events %s: %d\n", str, err); free(str); + parse_events_print_error(&errinfo, str); return -1; } } else { diff --git a/tools/perf/tests/parse-events.c b/tools/perf/tests/parse-events.c index 7d4077068454..61211918bfba 100644 --- a/tools/perf/tests/parse-events.c +++ b/tools/perf/tests/parse-events.c @@ -1309,6 +1309,11 @@ static int test__checkevent_config_cache(struct perf_evlist *evlist) return 0; } +static bool test__intel_pt_valid(void) +{ + return !!perf_pmu__find("intel_pt"); +} + static int test__intel_pt(struct perf_evlist *evlist) { struct perf_evsel *evsel = perf_evlist__first(evlist); @@ -1375,6 +1380,7 @@ struct evlist_test { const char *name; __u32 type; const int id; + bool (*valid)(void); int (*check)(struct perf_evlist *evlist); }; @@ -1648,6 +1654,7 @@ static struct evlist_test test__events[] = { }, { .name = "intel_pt//u", + .valid = test__intel_pt_valid, .check = test__intel_pt, .id = 52, }, @@ -1686,17 +1693,24 @@ static struct terms_test test__terms[] = { static int test_event(struct evlist_test *e) { + struct parse_events_error err = { .idx = 0, }; struct perf_evlist *evlist; int ret; + if (e->valid && !e->valid()) { + pr_debug("... SKIP"); + return 0; + } + evlist = perf_evlist__new(); if (evlist == NULL) return -ENOMEM; - ret = parse_events(evlist, e->name, NULL); + ret = parse_events(evlist, e->name, &err); if (ret) { - pr_debug("failed to parse event '%s', err %d\n", - e->name, ret); + pr_debug("failed to parse event '%s', err %d, str '%s'\n", + e->name, ret, err.str); + parse_events_print_error(&err, e->name); } else { ret = e->check(evlist); } @@ -1714,10 +1728,11 @@ static int test_events(struct evlist_test *events, unsigned cnt) for (i = 0; i < cnt; i++) { struct evlist_test *e = &events[i]; - pr_debug("running test %d '%s'\n", e->id, e->name); + pr_debug("running test %d '%s'", e->id, e->name); ret1 = test_event(e); if (ret1) ret2 = ret1; + pr_debug("\n"); } return ret2; @@ -1799,7 +1814,7 @@ static int test_pmu_events(void) } while (!ret && (ent = readdir(dir))) { - struct evlist_test e; + struct evlist_test e = { .id = 0, }; char name[2 * NAME_MAX + 1 + 12 + 3]; /* Names containing . are special and cannot be used directly */ diff --git a/tools/perf/tests/topology.c b/tools/perf/tests/topology.c index 40e30a26b23c..9497d02f69e6 100644 --- a/tools/perf/tests/topology.c +++ b/tools/perf/tests/topology.c @@ -45,6 +45,7 @@ static int session_write_header(char *path) perf_header__set_feat(&session->header, HEADER_CPU_TOPOLOGY); perf_header__set_feat(&session->header, HEADER_NRCPUS); + perf_header__set_feat(&session->header, HEADER_ARCH); session->header.data_size += DATA_SIZE; diff --git a/tools/perf/ui/gtk/hists.c b/tools/perf/ui/gtk/hists.c index b085f1b3e34d..4ab663ec3e5e 100644 --- a/tools/perf/ui/gtk/hists.c +++ b/tools/perf/ui/gtk/hists.c @@ -382,7 +382,7 @@ static void perf_gtk__show_hists(GtkWidget *window, struct hists *hists, gtk_tree_store_set(store, &iter, col_idx++, s, -1); } - if (hists__has_callchains(hists) && + if (hist_entry__has_callchains(h) && symbol_conf.use_callchain && hists__has(hists, sym)) { if (callchain_param.mode == CHAIN_GRAPH_REL) total = symbol_conf.cumulate_callchain ? diff --git a/tools/perf/util/c++/clang.cpp b/tools/perf/util/c++/clang.cpp index bf31ceab33bd..89512504551b 100644 --- a/tools/perf/util/c++/clang.cpp +++ b/tools/perf/util/c++/clang.cpp @@ -146,8 +146,15 @@ getBPFObjectFromModule(llvm::Module *Module) raw_svector_ostream ostream(*Buffer); legacy::PassManager PM; - if (TargetMachine->addPassesToEmitFile(PM, ostream, - TargetMachine::CGFT_ObjectFile)) { + bool NotAdded; +#if CLANG_VERSION_MAJOR < 7 + NotAdded = TargetMachine->addPassesToEmitFile(PM, ostream, + TargetMachine::CGFT_ObjectFile); +#else + NotAdded = TargetMachine->addPassesToEmitFile(PM, ostream, nullptr, + TargetMachine::CGFT_ObjectFile); +#endif + if (NotAdded) { llvm::errs() << "TargetMachine can't emit a file of this type\n"; return std::unique_ptr<llvm::SmallVectorImpl<char>>(nullptr);; } diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c index 540cd2dcd3e7..653ff65aa2c3 100644 --- a/tools/perf/util/header.c +++ b/tools/perf/util/header.c @@ -2129,6 +2129,7 @@ static int process_cpu_topology(struct feat_fd *ff, void *data __maybe_unused) int cpu_nr = ff->ph->env.nr_cpus_avail; u64 size = 0; struct perf_header *ph = ff->ph; + bool do_core_id_test = true; ph->env.cpu = calloc(cpu_nr, sizeof(*ph->env.cpu)); if (!ph->env.cpu) @@ -2183,6 +2184,13 @@ static int process_cpu_topology(struct feat_fd *ff, void *data __maybe_unused) return 0; } + /* On s390 the socket_id number is not related to the numbers of cpus. + * The socket_id number might be higher than the numbers of cpus. + * This depends on the configuration. + */ + if (ph->env.arch && !strncmp(ph->env.arch, "s390", 4)) + do_core_id_test = false; + for (i = 0; i < (u32)cpu_nr; i++) { if (do_read_u32(ff, &nr)) goto free_cpu; @@ -2192,7 +2200,7 @@ static int process_cpu_topology(struct feat_fd *ff, void *data __maybe_unused) if (do_read_u32(ff, &nr)) goto free_cpu; - if (nr != (u32)-1 && nr > (u32)cpu_nr) { + if (do_core_id_test && nr != (u32)-1 && nr > (u32)cpu_nr) { pr_debug("socket_id number is too big." "You may need to upgrade the perf tool.\n"); goto free_cpu; @@ -3456,7 +3464,7 @@ int perf_event__process_feature(struct perf_tool *tool, pr_warning("invalid record type %d in pipe-mode\n", type); return 0; } - if (feat == HEADER_RESERVED || feat > HEADER_LAST_FEATURE) { + if (feat == HEADER_RESERVED || feat >= HEADER_LAST_FEATURE) { pr_warning("invalid record type %d in pipe-mode\n", type); return -1; } diff --git a/tools/perf/util/hist.c b/tools/perf/util/hist.c index 52e8fda93a47..828cb9794c76 100644 --- a/tools/perf/util/hist.c +++ b/tools/perf/util/hist.c @@ -370,9 +370,11 @@ void hists__delete_entries(struct hists *hists) static int hist_entry__init(struct hist_entry *he, struct hist_entry *template, - bool sample_self) + bool sample_self, + size_t callchain_size) { *he = *template; + he->callchain_size = callchain_size; if (symbol_conf.cumulate_callchain) { he->stat_acc = malloc(sizeof(he->stat)); @@ -473,7 +475,7 @@ static struct hist_entry *hist_entry__new(struct hist_entry *template, he = ops->new(callchain_size); if (he) { - err = hist_entry__init(he, template, sample_self); + err = hist_entry__init(he, template, sample_self, callchain_size); if (err) { ops->free(he); he = NULL; @@ -619,9 +621,11 @@ __hists__add_entry(struct hists *hists, .raw_data = sample->raw_data, .raw_size = sample->raw_size, .ops = ops, - }; + }, *he = hists__findnew_entry(hists, &entry, al, sample_self); - return hists__findnew_entry(hists, &entry, al, sample_self); + if (!hists->has_callchains && he && he->callchain_size != 0) + hists->has_callchains = true; + return he; } struct hist_entry *hists__add_entry(struct hists *hists, diff --git a/tools/perf/util/hist.h b/tools/perf/util/hist.h index 06607c434949..73049f7f0f60 100644 --- a/tools/perf/util/hist.h +++ b/tools/perf/util/hist.h @@ -85,6 +85,7 @@ struct hists { struct events_stats stats; u64 event_stream; u16 col_len[HISTC_NR_COLS]; + bool has_callchains; int socket_filter; struct perf_hpp_list *hpp_list; struct list_head hpp_formats; @@ -222,8 +223,7 @@ static inline struct hists *evsel__hists(struct perf_evsel *evsel) static __pure inline bool hists__has_callchains(struct hists *hists) { - const struct perf_evsel *evsel = hists_to_evsel(hists); - return evsel__has_callchain(evsel); + return hists->has_callchains; } int hists__init(void); diff --git a/tools/perf/util/intel-pt-decoder/intel-pt-pkt-decoder.c b/tools/perf/util/intel-pt-decoder/intel-pt-pkt-decoder.c index ba4c9dd18643..d426761a549d 100644 --- a/tools/perf/util/intel-pt-decoder/intel-pt-pkt-decoder.c +++ b/tools/perf/util/intel-pt-decoder/intel-pt-pkt-decoder.c @@ -366,7 +366,7 @@ static int intel_pt_get_cyc(unsigned int byte, const unsigned char *buf, if (len < offs) return INTEL_PT_NEED_MORE_BYTES; byte = buf[offs++]; - payload |= (byte >> 1) << shift; + payload |= ((uint64_t)byte >> 1) << shift; } packet->type = INTEL_PT_CYC; diff --git a/tools/perf/util/parse-events.y b/tools/perf/util/parse-events.y index 155d2570274f..da8fe57691b8 100644 --- a/tools/perf/util/parse-events.y +++ b/tools/perf/util/parse-events.y @@ -227,11 +227,16 @@ event_def: event_pmu | event_pmu: PE_NAME opt_pmu_config { + struct parse_events_state *parse_state = _parse_state; + struct parse_events_error *error = parse_state->error; struct list_head *list, *orig_terms, *terms; if (parse_events_copy_term_list($2, &orig_terms)) YYABORT; + if (error) + error->idx = @1.first_column; + ALLOC_LIST(list); if (parse_events_add_pmu(_parse_state, list, $1, $2, false, false)) { struct perf_pmu *pmu = NULL; diff --git a/tools/perf/util/pmu.c b/tools/perf/util/pmu.c index d2fb597c9a8c..3ba6a1742f91 100644 --- a/tools/perf/util/pmu.c +++ b/tools/perf/util/pmu.c @@ -234,6 +234,74 @@ static int perf_pmu__parse_snapshot(struct perf_pmu_alias *alias, return 0; } +static void perf_pmu_assign_str(char *name, const char *field, char **old_str, + char **new_str) +{ + if (!*old_str) + goto set_new; + + if (*new_str) { /* Have new string, check with old */ + if (strcasecmp(*old_str, *new_str)) + pr_debug("alias %s differs in field '%s'\n", + name, field); + zfree(old_str); + } else /* Nothing new --> keep old string */ + return; +set_new: + *old_str = *new_str; + *new_str = NULL; +} + +static void perf_pmu_update_alias(struct perf_pmu_alias *old, + struct perf_pmu_alias *newalias) +{ + perf_pmu_assign_str(old->name, "desc", &old->desc, &newalias->desc); + perf_pmu_assign_str(old->name, "long_desc", &old->long_desc, + &newalias->long_desc); + perf_pmu_assign_str(old->name, "topic", &old->topic, &newalias->topic); + perf_pmu_assign_str(old->name, "metric_expr", &old->metric_expr, + &newalias->metric_expr); + perf_pmu_assign_str(old->name, "metric_name", &old->metric_name, + &newalias->metric_name); + perf_pmu_assign_str(old->name, "value", &old->str, &newalias->str); + old->scale = newalias->scale; + old->per_pkg = newalias->per_pkg; + old->snapshot = newalias->snapshot; + memcpy(old->unit, newalias->unit, sizeof(old->unit)); +} + +/* Delete an alias entry. */ +static void perf_pmu_free_alias(struct perf_pmu_alias *newalias) +{ + zfree(&newalias->name); + zfree(&newalias->desc); + zfree(&newalias->long_desc); + zfree(&newalias->topic); + zfree(&newalias->str); + zfree(&newalias->metric_expr); + zfree(&newalias->metric_name); + parse_events_terms__purge(&newalias->terms); + free(newalias); +} + +/* Merge an alias, search in alias list. If this name is already + * present merge both of them to combine all information. + */ +static bool perf_pmu_merge_alias(struct perf_pmu_alias *newalias, + struct list_head *alist) +{ + struct perf_pmu_alias *a; + + list_for_each_entry(a, alist, list) { + if (!strcasecmp(newalias->name, a->name)) { + perf_pmu_update_alias(a, newalias); + perf_pmu_free_alias(newalias); + return true; + } + } + return false; +} + static int __perf_pmu__new_alias(struct list_head *list, char *dir, char *name, char *desc, char *val, char *long_desc, char *topic, @@ -241,9 +309,11 @@ static int __perf_pmu__new_alias(struct list_head *list, char *dir, char *name, char *metric_expr, char *metric_name) { + struct parse_events_term *term; struct perf_pmu_alias *alias; int ret; int num; + char newval[256]; alias = malloc(sizeof(*alias)); if (!alias) @@ -262,6 +332,27 @@ static int __perf_pmu__new_alias(struct list_head *list, char *dir, char *name, return ret; } + /* Scan event and remove leading zeroes, spaces, newlines, some + * platforms have terms specified as + * event=0x0091 (read from files ../<PMU>/events/<FILE> + * and terms specified as event=0x91 (read from JSON files). + * + * Rebuild string to make alias->str member comparable. + */ + memset(newval, 0, sizeof(newval)); + ret = 0; + list_for_each_entry(term, &alias->terms, list) { + if (ret) + ret += scnprintf(newval + ret, sizeof(newval) - ret, + ","); + if (term->type_val == PARSE_EVENTS__TERM_TYPE_NUM) + ret += scnprintf(newval + ret, sizeof(newval) - ret, + "%s=%#x", term->config, term->val.num); + else if (term->type_val == PARSE_EVENTS__TERM_TYPE_STR) + ret += scnprintf(newval + ret, sizeof(newval) - ret, + "%s=%s", term->config, term->val.str); + } + alias->name = strdup(name); if (dir) { /* @@ -285,9 +376,10 @@ static int __perf_pmu__new_alias(struct list_head *list, char *dir, char *name, snprintf(alias->unit, sizeof(alias->unit), "%s", unit); } alias->per_pkg = perpkg && sscanf(perpkg, "%d", &num) == 1 && num == 1; - alias->str = strdup(val); + alias->str = strdup(newval); - list_add_tail(&alias->list, list); + if (!perf_pmu_merge_alias(alias, list)) + list_add_tail(&alias->list, list); return 0; } @@ -303,6 +395,9 @@ static int perf_pmu__new_alias(struct list_head *list, char *dir, char *name, FI buf[ret] = 0; + /* Remove trailing newline from sysfs file */ + rtrim(buf); + return __perf_pmu__new_alias(list, dir, name, NULL, buf, NULL, NULL, NULL, NULL, NULL, NULL); } diff --git a/tools/perf/util/sort.h b/tools/perf/util/sort.h index 7cf2d5cc038e..8bf302cafcec 100644 --- a/tools/perf/util/sort.h +++ b/tools/perf/util/sort.h @@ -112,6 +112,8 @@ struct hist_entry { char level; u8 filtered; + + u16 callchain_size; union { /* * Since perf diff only supports the stdio output, TUI @@ -153,7 +155,7 @@ struct hist_entry { static __pure inline bool hist_entry__has_callchains(struct hist_entry *he) { - return hists__has_callchains(he->hists); + return he->callchain_size != 0; } static inline bool hist_entry__has_pairs(struct hist_entry *he) diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8 index ca9ef7017624..d39e4ff7d0bf 100644 --- a/tools/power/x86/turbostat/turbostat.8 +++ b/tools/power/x86/turbostat/turbostat.8 @@ -56,7 +56,7 @@ name as necessary to disambiguate it from others is necessary. Note that option .PP \fB--hide column\fP do not show the specified built-in columns. May be invoked multiple times, or with a comma-separated list of column names. Use "--hide sysfs" to hide the sysfs statistics columns as a group. .PP -\fB--enable column\fP show the specified built-in columns, which are otherwise disabled, by default. Currently the only built-in counters disabled by default are "usec" and "Time_Of_Day_Seconds". +\fB--enable column\fP show the specified built-in columns, which are otherwise disabled, by default. Currently the only built-in counters disabled by default are "usec", "Time_Of_Day_Seconds", "APIC" and "X2APIC". The column name "all" can be used to enable all disabled-by-default built-in counters. .PP \fB--show column\fP show only the specified built-in columns. May be invoked multiple times, or with a comma-separated list of column names. Use "--show sysfs" to show the sysfs statistics columns as a group. diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index d6cff3070ebd..4d14bbbf9b63 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -109,6 +109,7 @@ unsigned int has_hwp_activity_window; /* IA32_HWP_REQUEST[bits 41:32] */ unsigned int has_hwp_epp; /* IA32_HWP_REQUEST[bits 31:24] */ unsigned int has_hwp_pkg; /* IA32_HWP_REQUEST_PKG */ unsigned int has_misc_feature_control; +unsigned int first_counter_read = 1; #define RAPL_PKG (1 << 0) /* 0x610 MSR_PKG_POWER_LIMIT */ @@ -170,6 +171,8 @@ struct thread_data { unsigned long long irq_count; unsigned int smi_count; unsigned int cpu_id; + unsigned int apic_id; + unsigned int x2apic_id; unsigned int flags; #define CPU_IS_FIRST_THREAD_IN_CORE 0x2 #define CPU_IS_FIRST_CORE_IN_PACKAGE 0x4 @@ -381,19 +384,23 @@ int get_msr(int cpu, off_t offset, unsigned long long *msr) } /* - * Each string in this array is compared in --show and --hide cmdline. - * Thus, strings that are proper sub-sets must follow their more specific peers. + * This list matches the column headers, except + * 1. built-in only, the sysfs counters are not here -- we learn of those at run-time + * 2. Core and CPU are moved to the end, we can't have strings that contain them + * matching on them for --show and --hide. */ struct msr_counter bic[] = { { 0x0, "usec" }, { 0x0, "Time_Of_Day_Seconds" }, { 0x0, "Package" }, + { 0x0, "Node" }, { 0x0, "Avg_MHz" }, + { 0x0, "Busy%" }, { 0x0, "Bzy_MHz" }, { 0x0, "TSC_MHz" }, { 0x0, "IRQ" }, { 0x0, "SMI", "", 32, 0, FORMAT_DELTA, NULL}, - { 0x0, "Busy%" }, + { 0x0, "sysfs" }, { 0x0, "CPU%c1" }, { 0x0, "CPU%c3" }, { 0x0, "CPU%c6" }, @@ -424,73 +431,73 @@ struct msr_counter bic[] = { { 0x0, "Cor_J" }, { 0x0, "GFX_J" }, { 0x0, "RAM_J" }, - { 0x0, "Core" }, - { 0x0, "CPU" }, { 0x0, "Mod%c6" }, - { 0x0, "sysfs" }, { 0x0, "Totl%C0" }, { 0x0, "Any%C0" }, { 0x0, "GFX%C0" }, { 0x0, "CPUGFX%" }, - { 0x0, "Node%" }, + { 0x0, "Core" }, + { 0x0, "CPU" }, + { 0x0, "APIC" }, + { 0x0, "X2APIC" }, }; - - #define MAX_BIC (sizeof(bic) / sizeof(struct msr_counter)) #define BIC_USEC (1ULL << 0) #define BIC_TOD (1ULL << 1) #define BIC_Package (1ULL << 2) -#define BIC_Avg_MHz (1ULL << 3) -#define BIC_Bzy_MHz (1ULL << 4) -#define BIC_TSC_MHz (1ULL << 5) -#define BIC_IRQ (1ULL << 6) -#define BIC_SMI (1ULL << 7) -#define BIC_Busy (1ULL << 8) -#define BIC_CPU_c1 (1ULL << 9) -#define BIC_CPU_c3 (1ULL << 10) -#define BIC_CPU_c6 (1ULL << 11) -#define BIC_CPU_c7 (1ULL << 12) -#define BIC_ThreadC (1ULL << 13) -#define BIC_CoreTmp (1ULL << 14) -#define BIC_CoreCnt (1ULL << 15) -#define BIC_PkgTmp (1ULL << 16) -#define BIC_GFX_rc6 (1ULL << 17) -#define BIC_GFXMHz (1ULL << 18) -#define BIC_Pkgpc2 (1ULL << 19) -#define BIC_Pkgpc3 (1ULL << 20) -#define BIC_Pkgpc6 (1ULL << 21) -#define BIC_Pkgpc7 (1ULL << 22) -#define BIC_Pkgpc8 (1ULL << 23) -#define BIC_Pkgpc9 (1ULL << 24) -#define BIC_Pkgpc10 (1ULL << 25) -#define BIC_CPU_LPI (1ULL << 26) -#define BIC_SYS_LPI (1ULL << 27) -#define BIC_PkgWatt (1ULL << 26) -#define BIC_CorWatt (1ULL << 27) -#define BIC_GFXWatt (1ULL << 28) -#define BIC_PkgCnt (1ULL << 29) -#define BIC_RAMWatt (1ULL << 30) -#define BIC_PKG__ (1ULL << 31) -#define BIC_RAM__ (1ULL << 32) -#define BIC_Pkg_J (1ULL << 33) -#define BIC_Cor_J (1ULL << 34) -#define BIC_GFX_J (1ULL << 35) -#define BIC_RAM_J (1ULL << 36) -#define BIC_Core (1ULL << 37) -#define BIC_CPU (1ULL << 38) -#define BIC_Mod_c6 (1ULL << 39) -#define BIC_sysfs (1ULL << 40) -#define BIC_Totl_c0 (1ULL << 41) -#define BIC_Any_c0 (1ULL << 42) -#define BIC_GFX_c0 (1ULL << 43) -#define BIC_CPUGFX (1ULL << 44) -#define BIC_Node (1ULL << 45) - -#define BIC_DISABLED_BY_DEFAULT (BIC_USEC | BIC_TOD) +#define BIC_Node (1ULL << 3) +#define BIC_Avg_MHz (1ULL << 4) +#define BIC_Busy (1ULL << 5) +#define BIC_Bzy_MHz (1ULL << 6) +#define BIC_TSC_MHz (1ULL << 7) +#define BIC_IRQ (1ULL << 8) +#define BIC_SMI (1ULL << 9) +#define BIC_sysfs (1ULL << 10) +#define BIC_CPU_c1 (1ULL << 11) +#define BIC_CPU_c3 (1ULL << 12) +#define BIC_CPU_c6 (1ULL << 13) +#define BIC_CPU_c7 (1ULL << 14) +#define BIC_ThreadC (1ULL << 15) +#define BIC_CoreTmp (1ULL << 16) +#define BIC_CoreCnt (1ULL << 17) +#define BIC_PkgTmp (1ULL << 18) +#define BIC_GFX_rc6 (1ULL << 19) +#define BIC_GFXMHz (1ULL << 20) +#define BIC_Pkgpc2 (1ULL << 21) +#define BIC_Pkgpc3 (1ULL << 22) +#define BIC_Pkgpc6 (1ULL << 23) +#define BIC_Pkgpc7 (1ULL << 24) +#define BIC_Pkgpc8 (1ULL << 25) +#define BIC_Pkgpc9 (1ULL << 26) +#define BIC_Pkgpc10 (1ULL << 27) +#define BIC_CPU_LPI (1ULL << 28) +#define BIC_SYS_LPI (1ULL << 29) +#define BIC_PkgWatt (1ULL << 30) +#define BIC_CorWatt (1ULL << 31) +#define BIC_GFXWatt (1ULL << 32) +#define BIC_PkgCnt (1ULL << 33) +#define BIC_RAMWatt (1ULL << 34) +#define BIC_PKG__ (1ULL << 35) +#define BIC_RAM__ (1ULL << 36) +#define BIC_Pkg_J (1ULL << 37) +#define BIC_Cor_J (1ULL << 38) +#define BIC_GFX_J (1ULL << 39) +#define BIC_RAM_J (1ULL << 40) +#define BIC_Mod_c6 (1ULL << 41) +#define BIC_Totl_c0 (1ULL << 42) +#define BIC_Any_c0 (1ULL << 43) +#define BIC_GFX_c0 (1ULL << 44) +#define BIC_CPUGFX (1ULL << 45) +#define BIC_Core (1ULL << 46) +#define BIC_CPU (1ULL << 47) +#define BIC_APIC (1ULL << 48) +#define BIC_X2APIC (1ULL << 49) + +#define BIC_DISABLED_BY_DEFAULT (BIC_USEC | BIC_TOD | BIC_APIC | BIC_X2APIC) unsigned long long bic_enabled = (0xFFFFFFFFFFFFFFFFULL & ~BIC_DISABLED_BY_DEFAULT); -unsigned long long bic_present = BIC_USEC | BIC_TOD | BIC_sysfs; +unsigned long long bic_present = BIC_USEC | BIC_TOD | BIC_sysfs | BIC_APIC | BIC_X2APIC; #define DO_BIC(COUNTER_NAME) (bic_enabled & bic_present & COUNTER_NAME) #define ENABLE_BIC(COUNTER_NAME) (bic_enabled |= COUNTER_NAME) @@ -517,17 +524,34 @@ void help(void) "when COMMAND completes.\n" "If no COMMAND is specified, turbostat wakes every 5-seconds\n" "to print statistics, until interrupted.\n" - "--add add a counter\n" - " eg. --add msr0x10,u64,cpu,delta,MY_TSC\n" - "--cpu cpu-set limit output to summary plus cpu-set:\n" - " {core | package | j,k,l..m,n-p }\n" - "--quiet skip decoding system configuration header\n" - "--interval sec.subsec Override default 5-second measurement interval\n" - "--help print this help message\n" - "--list list column headers only\n" - "--num_iterations num number of the measurement iterations\n" - "--out file create or truncate \"file\" for all output\n" - "--version print version information\n" + " -a, --add add a counter\n" + " eg. --add msr0x10,u64,cpu,delta,MY_TSC\n" + " -c, --cpu cpu-set limit output to summary plus cpu-set:\n" + " {core | package | j,k,l..m,n-p }\n" + " -d, --debug displays usec, Time_Of_Day_Seconds and more debugging\n" + " -D, --Dump displays the raw counter values\n" + " -e, --enable [all | column]\n" + " shows all or the specified disabled column\n" + " -H, --hide [column|column,column,...]\n" + " hide the specified column(s)\n" + " -i, --interval sec.subsec\n" + " Override default 5-second measurement interval\n" + " -J, --Joules displays energy in Joules instead of Watts\n" + " -l, --list list column headers only\n" + " -n, --num_iterations num\n" + " number of the measurement iterations\n" + " -o, --out file\n" + " create or truncate \"file\" for all output\n" + " -q, --quiet skip decoding system configuration header\n" + " -s, --show [column|column,column,...]\n" + " show only the specified column(s)\n" + " -S, --Summary\n" + " limits output to 1-line system summary per interval\n" + " -T, --TCC temperature\n" + " sets the Thermal Control Circuit temperature in\n" + " degrees Celsius\n" + " -h, --help print this help message\n" + " -v, --version print version information\n" "\n" "For more help, run \"man turbostat\"\n"); } @@ -601,6 +625,10 @@ void print_header(char *delim) outp += sprintf(outp, "%sCore", (printed++ ? delim : "")); if (DO_BIC(BIC_CPU)) outp += sprintf(outp, "%sCPU", (printed++ ? delim : "")); + if (DO_BIC(BIC_APIC)) + outp += sprintf(outp, "%sAPIC", (printed++ ? delim : "")); + if (DO_BIC(BIC_X2APIC)) + outp += sprintf(outp, "%sX2APIC", (printed++ ? delim : "")); if (DO_BIC(BIC_Avg_MHz)) outp += sprintf(outp, "%sAvg_MHz", (printed++ ? delim : "")); if (DO_BIC(BIC_Busy)) @@ -880,6 +908,10 @@ int format_counters(struct thread_data *t, struct core_data *c, outp += sprintf(outp, "%s-", (printed++ ? delim : "")); if (DO_BIC(BIC_CPU)) outp += sprintf(outp, "%s-", (printed++ ? delim : "")); + if (DO_BIC(BIC_APIC)) + outp += sprintf(outp, "%s-", (printed++ ? delim : "")); + if (DO_BIC(BIC_X2APIC)) + outp += sprintf(outp, "%s-", (printed++ ? delim : "")); } else { if (DO_BIC(BIC_Package)) { if (p) @@ -904,6 +936,10 @@ int format_counters(struct thread_data *t, struct core_data *c, } if (DO_BIC(BIC_CPU)) outp += sprintf(outp, "%s%d", (printed++ ? delim : ""), t->cpu_id); + if (DO_BIC(BIC_APIC)) + outp += sprintf(outp, "%s%d", (printed++ ? delim : ""), t->apic_id); + if (DO_BIC(BIC_X2APIC)) + outp += sprintf(outp, "%s%d", (printed++ ? delim : ""), t->x2apic_id); } if (DO_BIC(BIC_Avg_MHz)) @@ -1231,6 +1267,12 @@ delta_thread(struct thread_data *new, struct thread_data *old, int i; struct msr_counter *mp; + /* we run cpuid just the 1st time, copy the results */ + if (DO_BIC(BIC_APIC)) + new->apic_id = old->apic_id; + if (DO_BIC(BIC_X2APIC)) + new->x2apic_id = old->x2apic_id; + /* * the timestamps from start of measurement interval are in "old" * the timestamp from end of measurement interval are in "new" @@ -1393,6 +1435,12 @@ int sum_counters(struct thread_data *t, struct core_data *c, int i; struct msr_counter *mp; + /* copy un-changing apic_id's */ + if (DO_BIC(BIC_APIC)) + average.threads.apic_id = t->apic_id; + if (DO_BIC(BIC_X2APIC)) + average.threads.x2apic_id = t->x2apic_id; + /* remember first tv_begin */ if (average.threads.tv_begin.tv_sec == 0) average.threads.tv_begin = t->tv_begin; @@ -1619,6 +1667,34 @@ int get_mp(int cpu, struct msr_counter *mp, unsigned long long *counterp) return 0; } +void get_apic_id(struct thread_data *t) +{ + unsigned int eax, ebx, ecx, edx, max_level; + + eax = ebx = ecx = edx = 0; + + if (!genuine_intel) + return; + + __cpuid(0, max_level, ebx, ecx, edx); + + __cpuid(1, eax, ebx, ecx, edx); + t->apic_id = (ebx >> 24) & 0xf; + + if (max_level < 0xb) + return; + + if (!DO_BIC(BIC_X2APIC)) + return; + + ecx = 0; + __cpuid(0xb, eax, ebx, ecx, edx); + t->x2apic_id = edx; + + if (debug && (t->apic_id != t->x2apic_id)) + fprintf(stderr, "cpu%d: apic 0x%x x2apic 0x%x\n", t->cpu_id, t->apic_id, t->x2apic_id); +} + /* * get_counters(...) * migrate to cpu @@ -1632,7 +1708,6 @@ int get_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p) struct msr_counter *mp; int i; - gettimeofday(&t->tv_begin, (struct timezone *)NULL); if (cpu_migrate(cpu)) { @@ -1640,6 +1715,8 @@ int get_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p) return -1; } + if (first_counter_read) + get_apic_id(t); retry: t->tsc = rdtsc(); /* we are running on local CPU of interest */ @@ -2432,6 +2509,12 @@ void set_node_data(void) if (pni[pkg].count > topo.nodes_per_pkg) topo.nodes_per_pkg = pni[0].count; + /* Fake 1 node per pkg for machines that don't + * expose nodes and thus avoid -nan results + */ + if (topo.nodes_per_pkg == 0) + topo.nodes_per_pkg = 1; + for (cpu = 0; cpu < topo.num_cpus; cpu++) { pkg = cpus[cpu].physical_package_id; node = cpus[cpu].physical_node_id; @@ -2879,6 +2962,7 @@ void do_sleep(void) } } + void turbostat_loop() { int retval; @@ -2892,6 +2976,7 @@ restart: snapshot_proc_sysfs_files(); retval = for_all_cpus(get_counters, EVEN_COUNTERS); + first_counter_read = 0; if (retval < -1) { exit(retval); } else if (retval == -1) { @@ -4392,7 +4477,7 @@ void process_cpuid() if (!quiet) { fprintf(outf, "%d CPUID levels; family:model:stepping 0x%x:%x:%x (%d:%d:%d)\n", max_level, family, model, stepping, family, model, stepping); - fprintf(outf, "CPUID(1): %s %s %s %s %s %s %s %s %s\n", + fprintf(outf, "CPUID(1): %s %s %s %s %s %s %s %s %s %s\n", ecx & (1 << 0) ? "SSE3" : "-", ecx & (1 << 3) ? "MONITOR" : "-", ecx & (1 << 6) ? "SMX" : "-", @@ -4401,6 +4486,7 @@ void process_cpuid() edx & (1 << 4) ? "TSC" : "-", edx & (1 << 5) ? "MSR" : "-", edx & (1 << 22) ? "ACPI-TM" : "-", + edx & (1 << 28) ? "HT" : "-", edx & (1 << 29) ? "TM" : "-"); } @@ -4652,7 +4738,6 @@ void process_cpuid() return; } - /* * in /dev/cpu/ return success for names that are numbers * ie. filter out ".", "..", "microcode". @@ -4842,6 +4927,13 @@ void init_counter(struct thread_data *thread_base, struct core_data *core_base, struct core_data *c; struct pkg_data *p; + + /* Workaround for systems where physical_node_id==-1 + * and logical_node_id==(-1 - topo.num_cpus) + */ + if (node_id < 0) + node_id = 0; + t = GET_THREAD(thread_base, thread_id, core_id, node_id, pkg_id); c = GET_CORE(core_base, core_id, node_id, pkg_id); p = GET_PKG(pkg_base, pkg_id); @@ -4946,6 +5038,7 @@ int fork_it(char **argv) snapshot_proc_sysfs_files(); status = for_all_cpus(get_counters, EVEN_COUNTERS); + first_counter_read = 0; if (status) exit(status); /* clear affinity side-effect of get_counters() */ @@ -5009,7 +5102,7 @@ int get_and_dump_counters(void) } void print_version() { - fprintf(outf, "turbostat version 18.06.01" + fprintf(outf, "turbostat version 18.06.20" " - Len Brown <lenb@kernel.org>\n"); } @@ -5381,7 +5474,7 @@ void cmdline(int argc, char **argv) break; case 'e': /* --enable specified counter */ - bic_enabled |= bic_lookup(optarg, SHOW_LIST); + bic_enabled = bic_enabled | bic_lookup(optarg, SHOW_LIST); break; case 'd': debug++; @@ -5465,7 +5558,6 @@ void cmdline(int argc, char **argv) int main(int argc, char **argv) { outf = stderr; - cmdline(argc, argv); if (!quiet) diff --git a/tools/testing/selftests/bpf/config b/tools/testing/selftests/bpf/config index 1eefe211a4a8..7eb613ffef55 100644 --- a/tools/testing/selftests/bpf/config +++ b/tools/testing/selftests/bpf/config @@ -7,3 +7,13 @@ CONFIG_CGROUP_BPF=y CONFIG_NETDEVSIM=m CONFIG_NET_CLS_ACT=y CONFIG_NET_SCH_INGRESS=y +CONFIG_NET_IPIP=y +CONFIG_IPV6=y +CONFIG_NET_IPGRE_DEMUX=y +CONFIG_NET_IPGRE=y +CONFIG_IPV6_GRE=y +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_SHA256=m +CONFIG_VXLAN=y +CONFIG_GENEVE=y diff --git a/tools/testing/selftests/bpf/test_offload.py b/tools/testing/selftests/bpf/test_offload.py index e78aad0a68bb..be800d0e7a84 100755 --- a/tools/testing/selftests/bpf/test_offload.py +++ b/tools/testing/selftests/bpf/test_offload.py @@ -163,6 +163,10 @@ def bpftool(args, JSON=True, ns="", fail=True): def bpftool_prog_list(expected=None, ns=""): _, progs = bpftool("prog show", JSON=True, ns=ns, fail=True) + # Remove the base progs + for p in base_progs: + if p in progs: + progs.remove(p) if expected is not None: if len(progs) != expected: fail(True, "%d BPF programs loaded, expected %d" % @@ -171,6 +175,10 @@ def bpftool_prog_list(expected=None, ns=""): def bpftool_map_list(expected=None, ns=""): _, maps = bpftool("map show", JSON=True, ns=ns, fail=True) + # Remove the base maps + for m in base_maps: + if m in maps: + maps.remove(m) if expected is not None: if len(maps) != expected: fail(True, "%d BPF maps loaded, expected %d" % @@ -585,8 +593,8 @@ skip(os.getuid() != 0, "test must be run as root") # Check tools ret, progs = bpftool("prog", fail=False) skip(ret != 0, "bpftool not installed") -# Check no BPF programs are loaded -skip(len(progs) != 0, "BPF programs already loaded on the system") +base_progs = progs +_, base_maps = bpftool("map") # Check netdevsim ret, out = cmd("modprobe netdevsim", fail=False) diff --git a/tools/testing/selftests/bpf/test_tunnel.sh b/tools/testing/selftests/bpf/test_tunnel.sh index aeb2901f21f4..546aee3e9fb4 100755 --- a/tools/testing/selftests/bpf/test_tunnel.sh +++ b/tools/testing/selftests/bpf/test_tunnel.sh @@ -608,28 +608,26 @@ setup_xfrm_tunnel() test_xfrm_tunnel() { config_device - #tcpdump -nei veth1 ip & - output=$(mktemp) - cat /sys/kernel/debug/tracing/trace_pipe | tee $output & - setup_xfrm_tunnel + > /sys/kernel/debug/tracing/trace + setup_xfrm_tunnel tc qdisc add dev veth1 clsact tc filter add dev veth1 proto ip ingress bpf da obj test_tunnel_kern.o \ sec xfrm_get_state ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 sleep 1 - grep "reqid 1" $output + grep "reqid 1" /sys/kernel/debug/tracing/trace check_err $? - grep "spi 0x1" $output + grep "spi 0x1" /sys/kernel/debug/tracing/trace check_err $? - grep "remote ip 0xac100164" $output + grep "remote ip 0xac100164" /sys/kernel/debug/tracing/trace check_err $? cleanup if [ $ret -ne 0 ]; then - echo -e ${RED}"FAIL: xfrm tunnel"${NC} - return 1 - fi - echo -e ${GREEN}"PASS: xfrm tunnel"${NC} + echo -e ${RED}"FAIL: xfrm tunnel"${NC} + return 1 + fi + echo -e ${GREEN}"PASS: xfrm tunnel"${NC} } attach_bpf() @@ -657,6 +655,10 @@ cleanup() ip link del ip6geneve11 2> /dev/null ip link del erspan11 2> /dev/null ip link del ip6erspan11 2> /dev/null + ip xfrm policy delete dir out src 10.1.1.200/32 dst 10.1.1.100/32 2> /dev/null + ip xfrm policy delete dir in src 10.1.1.100/32 dst 10.1.1.200/32 2> /dev/null + ip xfrm state delete src 172.16.1.100 dst 172.16.1.200 proto esp spi 0x1 2> /dev/null + ip xfrm state delete src 172.16.1.200 dst 172.16.1.100 proto esp spi 0x2 2> /dev/null } cleanup_exit() @@ -668,7 +670,7 @@ cleanup_exit() check() { - ip link help $1 2>&1 | grep -q "^Usage:" + ip link help 2>&1 | grep -q "\s$1\s" if [ $? -ne 0 ];then echo "SKIP $1: iproute2 not support" cleanup diff --git a/tools/testing/selftests/net/.gitignore b/tools/testing/selftests/net/.gitignore index 128e548aa377..1a0ac3a29ec5 100644 --- a/tools/testing/selftests/net/.gitignore +++ b/tools/testing/selftests/net/.gitignore @@ -12,3 +12,4 @@ tcp_mmap udpgso udpgso_bench_rx udpgso_bench_tx +tcp_inq diff --git a/tools/testing/selftests/net/config b/tools/testing/selftests/net/config index 7ba089b33e8b..cd3a2f1545b5 100644 --- a/tools/testing/selftests/net/config +++ b/tools/testing/selftests/net/config @@ -12,3 +12,5 @@ CONFIG_NET_IPVTI=y CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_IPV6_VTI=y CONFIG_DUMMY=y +CONFIG_BRIDGE=y +CONFIG_VLAN_8021Q=y diff --git a/tools/testing/selftests/pstore/pstore_post_reboot_tests b/tools/testing/selftests/pstore/pstore_post_reboot_tests index 6ccb154cb4aa..22f8df1ad7d4 100755 --- a/tools/testing/selftests/pstore/pstore_post_reboot_tests +++ b/tools/testing/selftests/pstore/pstore_post_reboot_tests @@ -7,13 +7,16 @@ # # Released under the terms of the GPL v2. +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + . ./common_tests if [ -e $REBOOT_FLAG ]; then rm $REBOOT_FLAG else prlog "pstore_crash_test has not been executed yet. we skip further tests." - exit 0 + exit $ksft_skip fi prlog -n "Mounting pstore filesystem ... " diff --git a/tools/testing/selftests/rseq/param_test.c b/tools/testing/selftests/rseq/param_test.c index 6a9f602a8718..615252331813 100644 --- a/tools/testing/selftests/rseq/param_test.c +++ b/tools/testing/selftests/rseq/param_test.c @@ -137,6 +137,30 @@ unsigned int yield_mod_cnt, nr_abort; "subic. %%" INJECT_ASM_REG ", %%" INJECT_ASM_REG ", 1\n\t" \ "bne 222b\n\t" \ "333:\n\t" + +#elif defined(__mips__) + +#define RSEQ_INJECT_INPUT \ + , [loop_cnt_1]"m"(loop_cnt[1]) \ + , [loop_cnt_2]"m"(loop_cnt[2]) \ + , [loop_cnt_3]"m"(loop_cnt[3]) \ + , [loop_cnt_4]"m"(loop_cnt[4]) \ + , [loop_cnt_5]"m"(loop_cnt[5]) \ + , [loop_cnt_6]"m"(loop_cnt[6]) + +#define INJECT_ASM_REG "$5" + +#define RSEQ_INJECT_CLOBBER \ + , INJECT_ASM_REG + +#define RSEQ_INJECT_ASM(n) \ + "lw " INJECT_ASM_REG ", %[loop_cnt_" #n "]\n\t" \ + "beqz " INJECT_ASM_REG ", 333f\n\t" \ + "222:\n\t" \ + "addiu " INJECT_ASM_REG ", -1\n\t" \ + "bnez " INJECT_ASM_REG ", 222b\n\t" \ + "333:\n\t" + #else #error unsupported target #endif diff --git a/tools/testing/selftests/rseq/rseq-arm.h b/tools/testing/selftests/rseq/rseq-arm.h index 3b055f9aeaab..3cea19877227 100644 --- a/tools/testing/selftests/rseq/rseq-arm.h +++ b/tools/testing/selftests/rseq/rseq-arm.h @@ -57,6 +57,7 @@ do { \ #define __RSEQ_ASM_DEFINE_ABORT(table_label, label, teardown, \ abort_label, version, flags, \ start_ip, post_commit_offset, abort_ip) \ + ".balign 32\n\t" \ __rseq_str(table_label) ":\n\t" \ ".word " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \ ".word " __rseq_str(start_ip) ", 0x0, " __rseq_str(post_commit_offset) ", 0x0, " __rseq_str(abort_ip) ", 0x0\n\t" \ diff --git a/tools/testing/selftests/rseq/rseq-mips.h b/tools/testing/selftests/rseq/rseq-mips.h new file mode 100644 index 000000000000..7f48ecf46994 --- /dev/null +++ b/tools/testing/selftests/rseq/rseq-mips.h @@ -0,0 +1,725 @@ +/* SPDX-License-Identifier: LGPL-2.1 OR MIT */ +/* + * Author: Paul Burton <paul.burton@mips.com> + * (C) Copyright 2018 MIPS Tech LLC + * + * Based on rseq-arm.h: + * (C) Copyright 2016-2018 - Mathieu Desnoyers <mathieu.desnoyers@efficios.com> + */ + +#define RSEQ_SIG 0x53053053 + +#define rseq_smp_mb() __asm__ __volatile__ ("sync" ::: "memory") +#define rseq_smp_rmb() rseq_smp_mb() +#define rseq_smp_wmb() rseq_smp_mb() + +#define rseq_smp_load_acquire(p) \ +__extension__ ({ \ + __typeof(*p) ____p1 = RSEQ_READ_ONCE(*p); \ + rseq_smp_mb(); \ + ____p1; \ +}) + +#define rseq_smp_acquire__after_ctrl_dep() rseq_smp_rmb() + +#define rseq_smp_store_release(p, v) \ +do { \ + rseq_smp_mb(); \ + RSEQ_WRITE_ONCE(*p, v); \ +} while (0) + +#ifdef RSEQ_SKIP_FASTPATH +#include "rseq-skip.h" +#else /* !RSEQ_SKIP_FASTPATH */ + +#if _MIPS_SZLONG == 64 +# define LONG ".dword" +# define LONG_LA "dla" +# define LONG_L "ld" +# define LONG_S "sd" +# define LONG_ADDI "daddiu" +# define U32_U64_PAD(x) x +#elif _MIPS_SZLONG == 32 +# define LONG ".word" +# define LONG_LA "la" +# define LONG_L "lw" +# define LONG_S "sw" +# define LONG_ADDI "addiu" +# ifdef __BIG_ENDIAN +# define U32_U64_PAD(x) "0x0, " x +# else +# define U32_U64_PAD(x) x ", 0x0" +# endif +#else +# error unsupported _MIPS_SZLONG +#endif + +#define __RSEQ_ASM_DEFINE_TABLE(version, flags, start_ip, \ + post_commit_offset, abort_ip) \ + ".pushsection __rseq_table, \"aw\"\n\t" \ + ".balign 32\n\t" \ + ".word " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \ + LONG " " U32_U64_PAD(__rseq_str(start_ip)) "\n\t" \ + LONG " " U32_U64_PAD(__rseq_str(post_commit_offset)) "\n\t" \ + LONG " " U32_U64_PAD(__rseq_str(abort_ip)) "\n\t" \ + ".popsection\n\t" + +#define RSEQ_ASM_DEFINE_TABLE(start_ip, post_commit_ip, abort_ip) \ + __RSEQ_ASM_DEFINE_TABLE(0x0, 0x0, start_ip, \ + (post_commit_ip - start_ip), abort_ip) + +#define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \ + RSEQ_INJECT_ASM(1) \ + LONG_LA " $4, " __rseq_str(cs_label) "\n\t" \ + LONG_S " $4, %[" __rseq_str(rseq_cs) "]\n\t" \ + __rseq_str(label) ":\n\t" + +#define RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, label) \ + RSEQ_INJECT_ASM(2) \ + "lw $4, %[" __rseq_str(current_cpu_id) "]\n\t" \ + "bne $4, %[" __rseq_str(cpu_id) "], " __rseq_str(label) "\n\t" + +#define __RSEQ_ASM_DEFINE_ABORT(table_label, label, teardown, \ + abort_label, version, flags, \ + start_ip, post_commit_offset, abort_ip) \ + ".balign 32\n\t" \ + __rseq_str(table_label) ":\n\t" \ + ".word " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \ + LONG " " U32_U64_PAD(__rseq_str(start_ip)) "\n\t" \ + LONG " " U32_U64_PAD(__rseq_str(post_commit_offset)) "\n\t" \ + LONG " " U32_U64_PAD(__rseq_str(abort_ip)) "\n\t" \ + ".word " __rseq_str(RSEQ_SIG) "\n\t" \ + __rseq_str(label) ":\n\t" \ + teardown \ + "b %l[" __rseq_str(abort_label) "]\n\t" + +#define RSEQ_ASM_DEFINE_ABORT(table_label, label, teardown, abort_label, \ + start_ip, post_commit_ip, abort_ip) \ + __RSEQ_ASM_DEFINE_ABORT(table_label, label, teardown, \ + abort_label, 0x0, 0x0, start_ip, \ + (post_commit_ip - start_ip), abort_ip) + +#define RSEQ_ASM_DEFINE_CMPFAIL(label, teardown, cmpfail_label) \ + __rseq_str(label) ":\n\t" \ + teardown \ + "b %l[" __rseq_str(cmpfail_label) "]\n\t" + +#define rseq_workaround_gcc_asm_size_guess() __asm__ __volatile__("") + +static inline __attribute__((always_inline)) +int rseq_cmpeqv_storev(intptr_t *v, intptr_t expect, intptr_t newv, int cpu) +{ + RSEQ_INJECT_C(9) + + rseq_workaround_gcc_asm_size_guess(); + __asm__ __volatile__ goto ( + RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + /* Start rseq by storing table entry pointer into rseq_cs. */ + RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs) + RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_INJECT_ASM(3) + LONG_L " $4, %[v]\n\t" + "bne $4, %[expect], %l[cmpfail]\n\t" + RSEQ_INJECT_ASM(4) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + LONG_L " $4, %[v]\n\t" + "bne $4, %[expect], %l[error2]\n\t" +#endif + /* final store */ + LONG_S " %[newv], %[v]\n\t" + "2:\n\t" + RSEQ_INJECT_ASM(5) + "b 5f\n\t" + RSEQ_ASM_DEFINE_ABORT(3, 4, "", abort, 1b, 2b, 4f) + "5:\n\t" + : /* gcc asm goto does not allow outputs */ + : [cpu_id] "r" (cpu), + [current_cpu_id] "m" (__rseq_abi.cpu_id), + [rseq_cs] "m" (__rseq_abi.rseq_cs), + [v] "m" (*v), + [expect] "r" (expect), + [newv] "r" (newv) + RSEQ_INJECT_INPUT + : "$4", "memory" + RSEQ_INJECT_CLOBBER + : abort, cmpfail +#ifdef RSEQ_COMPARE_TWICE + , error1, error2 +#endif + ); + rseq_workaround_gcc_asm_size_guess(); + return 0; +abort: + rseq_workaround_gcc_asm_size_guess(); + RSEQ_INJECT_FAILED + return -1; +cmpfail: + rseq_workaround_gcc_asm_size_guess(); + return 1; +#ifdef RSEQ_COMPARE_TWICE +error1: + rseq_bug("cpu_id comparison failed"); +error2: + rseq_bug("expected value comparison failed"); +#endif +} + +static inline __attribute__((always_inline)) +int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot, + off_t voffp, intptr_t *load, int cpu) +{ + RSEQ_INJECT_C(9) + + rseq_workaround_gcc_asm_size_guess(); + __asm__ __volatile__ goto ( + RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + /* Start rseq by storing table entry pointer into rseq_cs. */ + RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs) + RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_INJECT_ASM(3) + LONG_L " $4, %[v]\n\t" + "beq $4, %[expectnot], %l[cmpfail]\n\t" + RSEQ_INJECT_ASM(4) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + LONG_L " $4, %[v]\n\t" + "beq $4, %[expectnot], %l[error2]\n\t" +#endif + LONG_S " $4, %[load]\n\t" + LONG_ADDI " $4, %[voffp]\n\t" + LONG_L " $4, 0($4)\n\t" + /* final store */ + LONG_S " $4, %[v]\n\t" + "2:\n\t" + RSEQ_INJECT_ASM(5) + "b 5f\n\t" + RSEQ_ASM_DEFINE_ABORT(3, 4, "", abort, 1b, 2b, 4f) + "5:\n\t" + : /* gcc asm goto does not allow outputs */ + : [cpu_id] "r" (cpu), + [current_cpu_id] "m" (__rseq_abi.cpu_id), + [rseq_cs] "m" (__rseq_abi.rseq_cs), + /* final store input */ + [v] "m" (*v), + [expectnot] "r" (expectnot), + [voffp] "Ir" (voffp), + [load] "m" (*load) + RSEQ_INJECT_INPUT + : "$4", "memory" + RSEQ_INJECT_CLOBBER + : abort, cmpfail +#ifdef RSEQ_COMPARE_TWICE + , error1, error2 +#endif + ); + rseq_workaround_gcc_asm_size_guess(); + return 0; +abort: + rseq_workaround_gcc_asm_size_guess(); + RSEQ_INJECT_FAILED + return -1; +cmpfail: + rseq_workaround_gcc_asm_size_guess(); + return 1; +#ifdef RSEQ_COMPARE_TWICE +error1: + rseq_bug("cpu_id comparison failed"); +error2: + rseq_bug("expected value comparison failed"); +#endif +} + +static inline __attribute__((always_inline)) +int rseq_addv(intptr_t *v, intptr_t count, int cpu) +{ + RSEQ_INJECT_C(9) + + rseq_workaround_gcc_asm_size_guess(); + __asm__ __volatile__ goto ( + RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + /* Start rseq by storing table entry pointer into rseq_cs. */ + RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs) + RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_INJECT_ASM(3) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) +#endif + LONG_L " $4, %[v]\n\t" + LONG_ADDI " $4, %[count]\n\t" + /* final store */ + LONG_S " $4, %[v]\n\t" + "2:\n\t" + RSEQ_INJECT_ASM(4) + "b 5f\n\t" + RSEQ_ASM_DEFINE_ABORT(3, 4, "", abort, 1b, 2b, 4f) + "5:\n\t" + : /* gcc asm goto does not allow outputs */ + : [cpu_id] "r" (cpu), + [current_cpu_id] "m" (__rseq_abi.cpu_id), + [rseq_cs] "m" (__rseq_abi.rseq_cs), + [v] "m" (*v), + [count] "Ir" (count) + RSEQ_INJECT_INPUT + : "$4", "memory" + RSEQ_INJECT_CLOBBER + : abort +#ifdef RSEQ_COMPARE_TWICE + , error1 +#endif + ); + rseq_workaround_gcc_asm_size_guess(); + return 0; +abort: + rseq_workaround_gcc_asm_size_guess(); + RSEQ_INJECT_FAILED + return -1; +#ifdef RSEQ_COMPARE_TWICE +error1: + rseq_bug("cpu_id comparison failed"); +#endif +} + +static inline __attribute__((always_inline)) +int rseq_cmpeqv_trystorev_storev(intptr_t *v, intptr_t expect, + intptr_t *v2, intptr_t newv2, + intptr_t newv, int cpu) +{ + RSEQ_INJECT_C(9) + + rseq_workaround_gcc_asm_size_guess(); + __asm__ __volatile__ goto ( + RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + /* Start rseq by storing table entry pointer into rseq_cs. */ + RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs) + RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_INJECT_ASM(3) + LONG_L " $4, %[v]\n\t" + "bne $4, %[expect], %l[cmpfail]\n\t" + RSEQ_INJECT_ASM(4) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + LONG_L " $4, %[v]\n\t" + "bne $4, %[expect], %l[error2]\n\t" +#endif + /* try store */ + LONG_S " %[newv2], %[v2]\n\t" + RSEQ_INJECT_ASM(5) + /* final store */ + LONG_S " %[newv], %[v]\n\t" + "2:\n\t" + RSEQ_INJECT_ASM(6) + "b 5f\n\t" + RSEQ_ASM_DEFINE_ABORT(3, 4, "", abort, 1b, 2b, 4f) + "5:\n\t" + : /* gcc asm goto does not allow outputs */ + : [cpu_id] "r" (cpu), + [current_cpu_id] "m" (__rseq_abi.cpu_id), + [rseq_cs] "m" (__rseq_abi.rseq_cs), + /* try store input */ + [v2] "m" (*v2), + [newv2] "r" (newv2), + /* final store input */ + [v] "m" (*v), + [expect] "r" (expect), + [newv] "r" (newv) + RSEQ_INJECT_INPUT + : "$4", "memory" + RSEQ_INJECT_CLOBBER + : abort, cmpfail +#ifdef RSEQ_COMPARE_TWICE + , error1, error2 +#endif + ); + rseq_workaround_gcc_asm_size_guess(); + return 0; +abort: + rseq_workaround_gcc_asm_size_guess(); + RSEQ_INJECT_FAILED + return -1; +cmpfail: + rseq_workaround_gcc_asm_size_guess(); + return 1; +#ifdef RSEQ_COMPARE_TWICE +error1: + rseq_bug("cpu_id comparison failed"); +error2: + rseq_bug("expected value comparison failed"); +#endif +} + +static inline __attribute__((always_inline)) +int rseq_cmpeqv_trystorev_storev_release(intptr_t *v, intptr_t expect, + intptr_t *v2, intptr_t newv2, + intptr_t newv, int cpu) +{ + RSEQ_INJECT_C(9) + + rseq_workaround_gcc_asm_size_guess(); + __asm__ __volatile__ goto ( + RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + /* Start rseq by storing table entry pointer into rseq_cs. */ + RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs) + RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_INJECT_ASM(3) + LONG_L " $4, %[v]\n\t" + "bne $4, %[expect], %l[cmpfail]\n\t" + RSEQ_INJECT_ASM(4) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + LONG_L " $4, %[v]\n\t" + "bne $4, %[expect], %l[error2]\n\t" +#endif + /* try store */ + LONG_S " %[newv2], %[v2]\n\t" + RSEQ_INJECT_ASM(5) + "sync\n\t" /* full sync provides store-release */ + /* final store */ + LONG_S " %[newv], %[v]\n\t" + "2:\n\t" + RSEQ_INJECT_ASM(6) + "b 5f\n\t" + RSEQ_ASM_DEFINE_ABORT(3, 4, "", abort, 1b, 2b, 4f) + "5:\n\t" + : /* gcc asm goto does not allow outputs */ + : [cpu_id] "r" (cpu), + [current_cpu_id] "m" (__rseq_abi.cpu_id), + [rseq_cs] "m" (__rseq_abi.rseq_cs), + /* try store input */ + [v2] "m" (*v2), + [newv2] "r" (newv2), + /* final store input */ + [v] "m" (*v), + [expect] "r" (expect), + [newv] "r" (newv) + RSEQ_INJECT_INPUT + : "$4", "memory" + RSEQ_INJECT_CLOBBER + : abort, cmpfail +#ifdef RSEQ_COMPARE_TWICE + , error1, error2 +#endif + ); + rseq_workaround_gcc_asm_size_guess(); + return 0; +abort: + rseq_workaround_gcc_asm_size_guess(); + RSEQ_INJECT_FAILED + return -1; +cmpfail: + rseq_workaround_gcc_asm_size_guess(); + return 1; +#ifdef RSEQ_COMPARE_TWICE +error1: + rseq_bug("cpu_id comparison failed"); +error2: + rseq_bug("expected value comparison failed"); +#endif +} + +static inline __attribute__((always_inline)) +int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect, + intptr_t *v2, intptr_t expect2, + intptr_t newv, int cpu) +{ + RSEQ_INJECT_C(9) + + rseq_workaround_gcc_asm_size_guess(); + __asm__ __volatile__ goto ( + RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + /* Start rseq by storing table entry pointer into rseq_cs. */ + RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs) + RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_INJECT_ASM(3) + LONG_L " $4, %[v]\n\t" + "bne $4, %[expect], %l[cmpfail]\n\t" + RSEQ_INJECT_ASM(4) + LONG_L " $4, %[v2]\n\t" + "bne $4, %[expect2], %l[cmpfail]\n\t" + RSEQ_INJECT_ASM(5) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + LONG_L " $4, %[v]\n\t" + "bne $4, %[expect], %l[error2]\n\t" + LONG_L " $4, %[v2]\n\t" + "bne $4, %[expect2], %l[error3]\n\t" +#endif + /* final store */ + LONG_S " %[newv], %[v]\n\t" + "2:\n\t" + RSEQ_INJECT_ASM(6) + "b 5f\n\t" + RSEQ_ASM_DEFINE_ABORT(3, 4, "", abort, 1b, 2b, 4f) + "5:\n\t" + : /* gcc asm goto does not allow outputs */ + : [cpu_id] "r" (cpu), + [current_cpu_id] "m" (__rseq_abi.cpu_id), + [rseq_cs] "m" (__rseq_abi.rseq_cs), + /* cmp2 input */ + [v2] "m" (*v2), + [expect2] "r" (expect2), + /* final store input */ + [v] "m" (*v), + [expect] "r" (expect), + [newv] "r" (newv) + RSEQ_INJECT_INPUT + : "$4", "memory" + RSEQ_INJECT_CLOBBER + : abort, cmpfail +#ifdef RSEQ_COMPARE_TWICE + , error1, error2, error3 +#endif + ); + rseq_workaround_gcc_asm_size_guess(); + return 0; +abort: + rseq_workaround_gcc_asm_size_guess(); + RSEQ_INJECT_FAILED + return -1; +cmpfail: + rseq_workaround_gcc_asm_size_guess(); + return 1; +#ifdef RSEQ_COMPARE_TWICE +error1: + rseq_bug("cpu_id comparison failed"); +error2: + rseq_bug("1st expected value comparison failed"); +error3: + rseq_bug("2nd expected value comparison failed"); +#endif +} + +static inline __attribute__((always_inline)) +int rseq_cmpeqv_trymemcpy_storev(intptr_t *v, intptr_t expect, + void *dst, void *src, size_t len, + intptr_t newv, int cpu) +{ + uintptr_t rseq_scratch[3]; + + RSEQ_INJECT_C(9) + + rseq_workaround_gcc_asm_size_guess(); + __asm__ __volatile__ goto ( + RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + LONG_S " %[src], %[rseq_scratch0]\n\t" + LONG_S " %[dst], %[rseq_scratch1]\n\t" + LONG_S " %[len], %[rseq_scratch2]\n\t" + /* Start rseq by storing table entry pointer into rseq_cs. */ + RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs) + RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_INJECT_ASM(3) + LONG_L " $4, %[v]\n\t" + "bne $4, %[expect], 5f\n\t" + RSEQ_INJECT_ASM(4) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 6f) + LONG_L " $4, %[v]\n\t" + "bne $4, %[expect], 7f\n\t" +#endif + /* try memcpy */ + "beqz %[len], 333f\n\t" \ + "222:\n\t" \ + "lb $4, 0(%[src])\n\t" \ + "sb $4, 0(%[dst])\n\t" \ + LONG_ADDI " %[src], 1\n\t" \ + LONG_ADDI " %[dst], 1\n\t" \ + LONG_ADDI " %[len], -1\n\t" \ + "bnez %[len], 222b\n\t" \ + "333:\n\t" \ + RSEQ_INJECT_ASM(5) + /* final store */ + LONG_S " %[newv], %[v]\n\t" + "2:\n\t" + RSEQ_INJECT_ASM(6) + /* teardown */ + LONG_L " %[len], %[rseq_scratch2]\n\t" + LONG_L " %[dst], %[rseq_scratch1]\n\t" + LONG_L " %[src], %[rseq_scratch0]\n\t" + "b 8f\n\t" + RSEQ_ASM_DEFINE_ABORT(3, 4, + /* teardown */ + LONG_L " %[len], %[rseq_scratch2]\n\t" + LONG_L " %[dst], %[rseq_scratch1]\n\t" + LONG_L " %[src], %[rseq_scratch0]\n\t", + abort, 1b, 2b, 4f) + RSEQ_ASM_DEFINE_CMPFAIL(5, + /* teardown */ + LONG_L " %[len], %[rseq_scratch2]\n\t" + LONG_L " %[dst], %[rseq_scratch1]\n\t" + LONG_L " %[src], %[rseq_scratch0]\n\t", + cmpfail) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_CMPFAIL(6, + /* teardown */ + LONG_L " %[len], %[rseq_scratch2]\n\t" + LONG_L " %[dst], %[rseq_scratch1]\n\t" + LONG_L " %[src], %[rseq_scratch0]\n\t", + error1) + RSEQ_ASM_DEFINE_CMPFAIL(7, + /* teardown */ + LONG_L " %[len], %[rseq_scratch2]\n\t" + LONG_L " %[dst], %[rseq_scratch1]\n\t" + LONG_L " %[src], %[rseq_scratch0]\n\t", + error2) +#endif + "8:\n\t" + : /* gcc asm goto does not allow outputs */ + : [cpu_id] "r" (cpu), + [current_cpu_id] "m" (__rseq_abi.cpu_id), + [rseq_cs] "m" (__rseq_abi.rseq_cs), + /* final store input */ + [v] "m" (*v), + [expect] "r" (expect), + [newv] "r" (newv), + /* try memcpy input */ + [dst] "r" (dst), + [src] "r" (src), + [len] "r" (len), + [rseq_scratch0] "m" (rseq_scratch[0]), + [rseq_scratch1] "m" (rseq_scratch[1]), + [rseq_scratch2] "m" (rseq_scratch[2]) + RSEQ_INJECT_INPUT + : "$4", "memory" + RSEQ_INJECT_CLOBBER + : abort, cmpfail +#ifdef RSEQ_COMPARE_TWICE + , error1, error2 +#endif + ); + rseq_workaround_gcc_asm_size_guess(); + return 0; +abort: + rseq_workaround_gcc_asm_size_guess(); + RSEQ_INJECT_FAILED + return -1; +cmpfail: + rseq_workaround_gcc_asm_size_guess(); + return 1; +#ifdef RSEQ_COMPARE_TWICE +error1: + rseq_workaround_gcc_asm_size_guess(); + rseq_bug("cpu_id comparison failed"); +error2: + rseq_workaround_gcc_asm_size_guess(); + rseq_bug("expected value comparison failed"); +#endif +} + +static inline __attribute__((always_inline)) +int rseq_cmpeqv_trymemcpy_storev_release(intptr_t *v, intptr_t expect, + void *dst, void *src, size_t len, + intptr_t newv, int cpu) +{ + uintptr_t rseq_scratch[3]; + + RSEQ_INJECT_C(9) + + rseq_workaround_gcc_asm_size_guess(); + __asm__ __volatile__ goto ( + RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + LONG_S " %[src], %[rseq_scratch0]\n\t" + LONG_S " %[dst], %[rseq_scratch1]\n\t" + LONG_S " %[len], %[rseq_scratch2]\n\t" + /* Start rseq by storing table entry pointer into rseq_cs. */ + RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs) + RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_INJECT_ASM(3) + LONG_L " $4, %[v]\n\t" + "bne $4, %[expect], 5f\n\t" + RSEQ_INJECT_ASM(4) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 6f) + LONG_L " $4, %[v]\n\t" + "bne $4, %[expect], 7f\n\t" +#endif + /* try memcpy */ + "beqz %[len], 333f\n\t" \ + "222:\n\t" \ + "lb $4, 0(%[src])\n\t" \ + "sb $4, 0(%[dst])\n\t" \ + LONG_ADDI " %[src], 1\n\t" \ + LONG_ADDI " %[dst], 1\n\t" \ + LONG_ADDI " %[len], -1\n\t" \ + "bnez %[len], 222b\n\t" \ + "333:\n\t" \ + RSEQ_INJECT_ASM(5) + "sync\n\t" /* full sync provides store-release */ + /* final store */ + LONG_S " %[newv], %[v]\n\t" + "2:\n\t" + RSEQ_INJECT_ASM(6) + /* teardown */ + LONG_L " %[len], %[rseq_scratch2]\n\t" + LONG_L " %[dst], %[rseq_scratch1]\n\t" + LONG_L " %[src], %[rseq_scratch0]\n\t" + "b 8f\n\t" + RSEQ_ASM_DEFINE_ABORT(3, 4, + /* teardown */ + LONG_L " %[len], %[rseq_scratch2]\n\t" + LONG_L " %[dst], %[rseq_scratch1]\n\t" + LONG_L " %[src], %[rseq_scratch0]\n\t", + abort, 1b, 2b, 4f) + RSEQ_ASM_DEFINE_CMPFAIL(5, + /* teardown */ + LONG_L " %[len], %[rseq_scratch2]\n\t" + LONG_L " %[dst], %[rseq_scratch1]\n\t" + LONG_L " %[src], %[rseq_scratch0]\n\t", + cmpfail) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_CMPFAIL(6, + /* teardown */ + LONG_L " %[len], %[rseq_scratch2]\n\t" + LONG_L " %[dst], %[rseq_scratch1]\n\t" + LONG_L " %[src], %[rseq_scratch0]\n\t", + error1) + RSEQ_ASM_DEFINE_CMPFAIL(7, + /* teardown */ + LONG_L " %[len], %[rseq_scratch2]\n\t" + LONG_L " %[dst], %[rseq_scratch1]\n\t" + LONG_L " %[src], %[rseq_scratch0]\n\t", + error2) +#endif + "8:\n\t" + : /* gcc asm goto does not allow outputs */ + : [cpu_id] "r" (cpu), + [current_cpu_id] "m" (__rseq_abi.cpu_id), + [rseq_cs] "m" (__rseq_abi.rseq_cs), + /* final store input */ + [v] "m" (*v), + [expect] "r" (expect), + [newv] "r" (newv), + /* try memcpy input */ + [dst] "r" (dst), + [src] "r" (src), + [len] "r" (len), + [rseq_scratch0] "m" (rseq_scratch[0]), + [rseq_scratch1] "m" (rseq_scratch[1]), + [rseq_scratch2] "m" (rseq_scratch[2]) + RSEQ_INJECT_INPUT + : "$4", "memory" + RSEQ_INJECT_CLOBBER + : abort, cmpfail +#ifdef RSEQ_COMPARE_TWICE + , error1, error2 +#endif + ); + rseq_workaround_gcc_asm_size_guess(); + return 0; +abort: + rseq_workaround_gcc_asm_size_guess(); + RSEQ_INJECT_FAILED + return -1; +cmpfail: + rseq_workaround_gcc_asm_size_guess(); + return 1; +#ifdef RSEQ_COMPARE_TWICE +error1: + rseq_workaround_gcc_asm_size_guess(); + rseq_bug("cpu_id comparison failed"); +error2: + rseq_workaround_gcc_asm_size_guess(); + rseq_bug("expected value comparison failed"); +#endif +} + +#endif /* !RSEQ_SKIP_FASTPATH */ diff --git a/tools/testing/selftests/rseq/rseq.h b/tools/testing/selftests/rseq/rseq.h index 0a808575cbc4..a4684112676c 100644 --- a/tools/testing/selftests/rseq/rseq.h +++ b/tools/testing/selftests/rseq/rseq.h @@ -73,6 +73,8 @@ extern __thread volatile struct rseq __rseq_abi; #include <rseq-arm.h> #elif defined(__PPC__) #include <rseq-ppc.h> +#elif defined(__mips__) +#include <rseq-mips.h> #else #error unsupported target #endif diff --git a/tools/testing/selftests/rseq/run_param_test.sh b/tools/testing/selftests/rseq/run_param_test.sh index 3acd6d75ff9f..3acd6d75ff9f 100644..100755 --- a/tools/testing/selftests/rseq/run_param_test.sh +++ b/tools/testing/selftests/rseq/run_param_test.sh diff --git a/tools/testing/selftests/sparc64/Makefile b/tools/testing/selftests/sparc64/Makefile index 2082eeffd779..a19531dba4dc 100644 --- a/tools/testing/selftests/sparc64/Makefile +++ b/tools/testing/selftests/sparc64/Makefile @@ -1,7 +1,18 @@ +# SPDX-License-Identifier: GPL-2.0 +uname_M := $(shell uname -m 2>/dev/null || echo not) +ARCH ?= $(shell echo $(uname_M) | sed -e s/x86_64/x86/) + +ifneq ($(ARCH),sparc64) +nothing: +.PHONY: all clean run_tests install +.SILENT: +else + SUBDIRS := drivers TEST_PROGS := run.sh + .PHONY: all clean include ../lib.mk @@ -18,10 +29,6 @@ all: fi \ done -override define RUN_TESTS - @cd $(OUTPUT); ./run.sh -endef - override define INSTALL_RULE mkdir -p $(INSTALL_PATH) install -t $(INSTALL_PATH) $(TEST_PROGS) $(TEST_PROGS_EXTENDED) $(TEST_FILES) @@ -33,10 +40,6 @@ override define INSTALL_RULE done; endef -override define EMIT_TESTS - echo "./run.sh" -endef - override define CLEAN @for DIR in $(SUBDIRS); do \ BUILD_TARGET=$(OUTPUT)/$$DIR; \ @@ -44,3 +47,4 @@ override define CLEAN make OUTPUT=$$BUILD_TARGET -C $$DIR $@;\ done endef +endif diff --git a/tools/testing/selftests/sparc64/drivers/Makefile b/tools/testing/selftests/sparc64/drivers/Makefile index 6264f40bbdbc..deb0df415565 100644 --- a/tools/testing/selftests/sparc64/drivers/Makefile +++ b/tools/testing/selftests/sparc64/drivers/Makefile @@ -1,4 +1,4 @@ - +# SPDX-License-Identifier: GPL-2.0 INCLUDEDIR := -I. CFLAGS := $(CFLAGS) $(INCLUDEDIR) -Wall -O2 -g diff --git a/tools/testing/selftests/static_keys/test_static_keys.sh b/tools/testing/selftests/static_keys/test_static_keys.sh index 24cff498b31a..fc9f8cde7d42 100755 --- a/tools/testing/selftests/static_keys/test_static_keys.sh +++ b/tools/testing/selftests/static_keys/test_static_keys.sh @@ -2,6 +2,19 @@ # SPDX-License-Identifier: GPL-2.0 # Runs static keys kernel module tests +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +if ! /sbin/modprobe -q -n test_static_key_base; then + echo "static_key: module test_static_key_base is not found [SKIP]" + exit $ksft_skip +fi + +if ! /sbin/modprobe -q -n test_static_keys; then + echo "static_key: module test_static_keys is not found [SKIP]" + exit $ksft_skip +fi + if /sbin/modprobe -q test_static_key_base; then if /sbin/modprobe -q test_static_keys; then echo "static_key: ok" diff --git a/tools/testing/selftests/sync/config b/tools/testing/selftests/sync/config new file mode 100644 index 000000000000..1ab7e8130db2 --- /dev/null +++ b/tools/testing/selftests/sync/config @@ -0,0 +1,4 @@ +CONFIG_STAGING=y +CONFIG_ANDROID=y +CONFIG_SYNC=y +CONFIG_SW_SYNC=y diff --git a/tools/testing/selftests/sysctl/sysctl.sh b/tools/testing/selftests/sysctl/sysctl.sh index ec232c3cfcaa..584eb8ea780a 100755 --- a/tools/testing/selftests/sysctl/sysctl.sh +++ b/tools/testing/selftests/sysctl/sysctl.sh @@ -14,6 +14,9 @@ # This performs a series tests against the proc sysctl interface. +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + TEST_NAME="sysctl" TEST_DRIVER="test_${TEST_NAME}" TEST_DIR=$(dirname $0) @@ -41,7 +44,7 @@ test_modprobe() echo "$0: $DIR not present" >&2 echo "You must have the following enabled in your kernel:" >&2 cat $TEST_DIR/config >&2 - exit 1 + exit $ksft_skip fi } @@ -98,28 +101,30 @@ test_reqs() uid=$(id -u) if [ $uid -ne 0 ]; then echo $msg must be run as root >&2 - exit 0 + exit $ksft_skip fi if ! which perl 2> /dev/null > /dev/null; then echo "$0: You need perl installed" - exit 1 + exit $ksft_skip fi if ! which getconf 2> /dev/null > /dev/null; then echo "$0: You need getconf installed" - exit 1 + exit $ksft_skip fi if ! which diff 2> /dev/null > /dev/null; then echo "$0: You need diff installed" - exit 1 + exit $ksft_skip fi } function load_req_mod() { - trap "test_modprobe" EXIT - if [ ! -d $DIR ]; then + if ! modprobe -q -n $TEST_DRIVER; then + echo "$0: module $TEST_DRIVER not found [SKIP]" + exit $ksft_skip + fi modprobe $TEST_DRIVER if [ $? -ne 0 ]; then exit @@ -765,6 +770,7 @@ function parse_args() test_reqs allow_user_defaults check_production_sysctl_writes_strict +test_modprobe load_req_mod trap "test_finish" EXIT diff --git a/tools/testing/selftests/user/test_user_copy.sh b/tools/testing/selftests/user/test_user_copy.sh index d60506fc77f8..f9b31a57439b 100755 --- a/tools/testing/selftests/user/test_user_copy.sh +++ b/tools/testing/selftests/user/test_user_copy.sh @@ -2,6 +2,13 @@ # SPDX-License-Identifier: GPL-2.0 # Runs copy_to/from_user infrastructure using test_user_copy kernel module +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +if ! /sbin/modprobe -q -n test_user_copy; then + echo "user: module test_user_copy is not found [SKIP]" + exit $ksft_skip +fi if /sbin/modprobe -q test_user_copy; then /sbin/modprobe -q -r test_user_copy echo "user_copy: ok" diff --git a/tools/testing/selftests/vm/compaction_test.c b/tools/testing/selftests/vm/compaction_test.c index 1097f04e4d80..bcec71250873 100644 --- a/tools/testing/selftests/vm/compaction_test.c +++ b/tools/testing/selftests/vm/compaction_test.c @@ -16,6 +16,8 @@ #include <unistd.h> #include <string.h> +#include "../kselftest.h" + #define MAP_SIZE 1048576 struct map_list { @@ -169,7 +171,7 @@ int main(int argc, char **argv) printf("Either the sysctl compact_unevictable_allowed is not\n" "set to 1 or couldn't read the proc file.\n" "Skipping the test\n"); - return 0; + return KSFT_SKIP; } lim.rlim_cur = RLIM_INFINITY; diff --git a/tools/testing/selftests/vm/mlock2-tests.c b/tools/testing/selftests/vm/mlock2-tests.c index 4997b9222cfa..637b6d0ac0d0 100644 --- a/tools/testing/selftests/vm/mlock2-tests.c +++ b/tools/testing/selftests/vm/mlock2-tests.c @@ -9,6 +9,8 @@ #include <stdbool.h> #include "mlock2.h" +#include "../kselftest.h" + struct vm_boundaries { unsigned long start; unsigned long end; @@ -303,7 +305,7 @@ static int test_mlock_lock() if (mlock2_(map, 2 * page_size, 0)) { if (errno == ENOSYS) { printf("Cannot call new mlock family, skipping test\n"); - _exit(0); + _exit(KSFT_SKIP); } perror("mlock2(0)"); goto unmap; @@ -412,7 +414,7 @@ static int test_mlock_onfault() if (mlock2_(map, 2 * page_size, MLOCK_ONFAULT)) { if (errno == ENOSYS) { printf("Cannot call new mlock family, skipping test\n"); - _exit(0); + _exit(KSFT_SKIP); } perror("mlock2(MLOCK_ONFAULT)"); goto unmap; @@ -425,7 +427,7 @@ static int test_mlock_onfault() if (munlock(map, 2 * page_size)) { if (errno == ENOSYS) { printf("Cannot call new mlock family, skipping test\n"); - _exit(0); + _exit(KSFT_SKIP); } perror("munlock()"); goto unmap; @@ -457,7 +459,7 @@ static int test_lock_onfault_of_present() if (mlock2_(map, 2 * page_size, MLOCK_ONFAULT)) { if (errno == ENOSYS) { printf("Cannot call new mlock family, skipping test\n"); - _exit(0); + _exit(KSFT_SKIP); } perror("mlock2(MLOCK_ONFAULT)"); goto unmap; @@ -583,7 +585,7 @@ static int test_vma_management(bool call_mlock) if (call_mlock && mlock2_(map, 3 * page_size, MLOCK_ONFAULT)) { if (errno == ENOSYS) { printf("Cannot call new mlock family, skipping test\n"); - _exit(0); + _exit(KSFT_SKIP); } perror("mlock(ONFAULT)\n"); goto out; diff --git a/tools/testing/selftests/vm/run_vmtests b/tools/testing/selftests/vm/run_vmtests index 22d564673830..88cbe5575f0c 100755 --- a/tools/testing/selftests/vm/run_vmtests +++ b/tools/testing/selftests/vm/run_vmtests @@ -2,6 +2,9 @@ # SPDX-License-Identifier: GPL-2.0 #please run as root +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + mnt=./huge exitcode=0 @@ -36,7 +39,7 @@ if [ -n "$freepgs" ] && [ -n "$hpgsize_KB" ]; then echo $(( $lackpgs + $nr_hugepgs )) > /proc/sys/vm/nr_hugepages if [ $? -ne 0 ]; then echo "Please run this test as root" - exit 1 + exit $ksft_skip fi while read name size unit; do if [ "$name" = "HugePages_Free:" ]; then diff --git a/tools/testing/selftests/vm/userfaultfd.c b/tools/testing/selftests/vm/userfaultfd.c index de2f9ec8a87f..7b8171e3128a 100644 --- a/tools/testing/selftests/vm/userfaultfd.c +++ b/tools/testing/selftests/vm/userfaultfd.c @@ -69,6 +69,8 @@ #include <setjmp.h> #include <stdbool.h> +#include "../kselftest.h" + #ifdef __NR_userfaultfd static unsigned long nr_cpus, nr_pages, nr_pages_per_cpu, page_size; @@ -1322,7 +1324,7 @@ int main(int argc, char **argv) int main(void) { printf("skip: Skipping userfaultfd test (missing __NR_userfaultfd)\n"); - return 0; + return KSFT_SKIP; } #endif /* __NR_userfaultfd */ diff --git a/tools/testing/selftests/x86/sigreturn.c b/tools/testing/selftests/x86/sigreturn.c index 246145b84a12..4d9dc3f2fd70 100644 --- a/tools/testing/selftests/x86/sigreturn.c +++ b/tools/testing/selftests/x86/sigreturn.c @@ -610,21 +610,41 @@ static int test_valid_sigreturn(int cs_bits, bool use_16bit_ss, int force_ss) */ for (int i = 0; i < NGREG; i++) { greg_t req = requested_regs[i], res = resulting_regs[i]; + if (i == REG_TRAPNO || i == REG_IP) continue; /* don't care */ - if (i == REG_SP) { - printf("\tSP: %llx -> %llx\n", (unsigned long long)req, - (unsigned long long)res); + if (i == REG_SP) { /* - * In many circumstances, the high 32 bits of rsp - * are zeroed. For example, we could be a real - * 32-bit program, or we could hit any of a number - * of poorly-documented IRET or segmented ESP - * oddities. If this happens, it's okay. + * If we were using a 16-bit stack segment, then + * the kernel is a bit stuck: IRET only restores + * the low 16 bits of ESP/RSP if SS is 16-bit. + * The kernel uses a hack to restore bits 31:16, + * but that hack doesn't help with bits 63:32. + * On Intel CPUs, bits 63:32 end up zeroed, and, on + * AMD CPUs, they leak the high bits of the kernel + * espfix64 stack pointer. There's very little that + * the kernel can do about it. + * + * Similarly, if we are returning to a 32-bit context, + * the CPU will often lose the high 32 bits of RSP. */ - if (res == (req & 0xFFFFFFFF)) - continue; /* OK; not expected to work */ + + if (res == req) + continue; + + if (cs_bits != 64 && ((res ^ req) & 0xFFFFFFFF) == 0) { + printf("[NOTE]\tSP: %llx -> %llx\n", + (unsigned long long)req, + (unsigned long long)res); + continue; + } + + printf("[FAIL]\tSP mismatch: requested 0x%llx; got 0x%llx\n", + (unsigned long long)requested_regs[i], + (unsigned long long)resulting_regs[i]); + nerrs++; + continue; } bool ignore_reg = false; @@ -654,25 +674,18 @@ static int test_valid_sigreturn(int cs_bits, bool use_16bit_ss, int force_ss) #endif /* Sanity check on the kernel */ - if (i == REG_CX && requested_regs[i] != resulting_regs[i]) { + if (i == REG_CX && req != res) { printf("[FAIL]\tCX (saved SP) mismatch: requested 0x%llx; got 0x%llx\n", - (unsigned long long)requested_regs[i], - (unsigned long long)resulting_regs[i]); + (unsigned long long)req, + (unsigned long long)res); nerrs++; continue; } - if (requested_regs[i] != resulting_regs[i] && !ignore_reg) { - /* - * SP is particularly interesting here. The - * usual cause of failures is that we hit the - * nasty IRET case of returning to a 16-bit SS, - * in which case bits 16:31 of the *kernel* - * stack pointer persist in ESP. - */ + if (req != res && !ignore_reg) { printf("[FAIL]\tReg %d mismatch: requested 0x%llx; got 0x%llx\n", - i, (unsigned long long)requested_regs[i], - (unsigned long long)resulting_regs[i]); + i, (unsigned long long)req, + (unsigned long long)res); nerrs++; } } diff --git a/tools/testing/selftests/zram/zram.sh b/tools/testing/selftests/zram/zram.sh index 754de7da426a..232e958ec454 100755 --- a/tools/testing/selftests/zram/zram.sh +++ b/tools/testing/selftests/zram/zram.sh @@ -2,6 +2,9 @@ # SPDX-License-Identifier: GPL-2.0 TCID="zram.sh" +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + . ./zram_lib.sh run_zram () { @@ -24,5 +27,5 @@ elif [ -b /dev/zram0 ]; then else echo "$TCID : No zram.ko module or /dev/zram0 device file not found" echo "$TCID : CONFIG_ZRAM is not set" - exit 1 + exit $ksft_skip fi diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh index f6a9c73e7a44..9e73a4fb9b0a 100755 --- a/tools/testing/selftests/zram/zram_lib.sh +++ b/tools/testing/selftests/zram/zram_lib.sh @@ -18,6 +18,9 @@ MODULE=0 dev_makeswap=-1 dev_mounted=-1 +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + trap INT check_prereqs() @@ -27,7 +30,7 @@ check_prereqs() if [ $uid -ne 0 ]; then echo $msg must be run as root >&2 - exit 0 + exit $ksft_skip fi } diff --git a/tools/virtio/linux/scatterlist.h b/tools/virtio/linux/scatterlist.h index 9a45f90e2d08..369ee308b668 100644 --- a/tools/virtio/linux/scatterlist.h +++ b/tools/virtio/linux/scatterlist.h @@ -36,7 +36,6 @@ static inline void sg_assign_page(struct scatterlist *sg, struct page *page) */ BUG_ON((unsigned long) page & 0x03); #ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); BUG_ON(sg_is_chain(sg)); #endif sg->page_link = page_link | (unsigned long) page; @@ -67,7 +66,6 @@ static inline void sg_set_page(struct scatterlist *sg, struct page *page, static inline struct page *sg_page(struct scatterlist *sg) { #ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); BUG_ON(sg_is_chain(sg)); #endif return (struct page *)((sg)->page_link & ~0x3); @@ -116,9 +114,6 @@ static inline void sg_chain(struct scatterlist *prv, unsigned int prv_nents, **/ static inline void sg_mark_end(struct scatterlist *sg) { -#ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); -#endif /* * Set termination bit, clear potential chain bit */ @@ -136,17 +131,11 @@ static inline void sg_mark_end(struct scatterlist *sg) **/ static inline void sg_unmark_end(struct scatterlist *sg) { -#ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); -#endif sg->page_link &= ~0x02; } static inline struct scatterlist *sg_next(struct scatterlist *sg) { -#ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); -#endif if (sg_is_last(sg)) return NULL; @@ -160,13 +149,6 @@ static inline struct scatterlist *sg_next(struct scatterlist *sg) static inline void sg_init_table(struct scatterlist *sgl, unsigned int nents) { memset(sgl, 0, sizeof(*sgl) * nents); -#ifdef CONFIG_DEBUG_SG - { - unsigned int i; - for (i = 0; i < nents; i++) - sgl[i].sg_magic = SG_MAGIC; - } -#endif sg_mark_end(&sgl[nents - 1]); } diff --git a/virt/kvm/Kconfig b/virt/kvm/Kconfig index 72143cfaf6ec..ea434ddc8499 100644 --- a/virt/kvm/Kconfig +++ b/virt/kvm/Kconfig @@ -47,7 +47,7 @@ config KVM_GENERIC_DIRTYLOG_READ_PROTECT config KVM_COMPAT def_bool y - depends on KVM && COMPAT && !S390 + depends on KVM && COMPAT && !(S390 || ARM64) config HAVE_KVM_IRQ_BYPASS bool diff --git a/virt/kvm/arm/mmu.c b/virt/kvm/arm/mmu.c index 8d90de213ce9..1d90d79706bd 100644 --- a/virt/kvm/arm/mmu.c +++ b/virt/kvm/arm/mmu.c @@ -297,6 +297,8 @@ static void unmap_stage2_range(struct kvm *kvm, phys_addr_t start, u64 size) phys_addr_t next; assert_spin_locked(&kvm->mmu_lock); + WARN_ON(size & ~PAGE_MASK); + pgd = kvm->arch.pgd + stage2_pgd_index(addr); do { /* diff --git a/virt/kvm/arm/vgic/vgic-v3.c b/virt/kvm/arm/vgic/vgic-v3.c index ff7dc890941a..cdce653e3c47 100644 --- a/virt/kvm/arm/vgic/vgic-v3.c +++ b/virt/kvm/arm/vgic/vgic-v3.c @@ -617,11 +617,6 @@ int vgic_v3_probe(const struct gic_kvm_info *info) pr_warn("GICV physical address 0x%llx not page aligned\n", (unsigned long long)info->vcpu.start); kvm_vgic_global_state.vcpu_base = 0; - } else if (!PAGE_ALIGNED(resource_size(&info->vcpu))) { - pr_warn("GICV size 0x%llx not a multiple of page size 0x%lx\n", - (unsigned long long)resource_size(&info->vcpu), - PAGE_SIZE); - kvm_vgic_global_state.vcpu_base = 0; } else { kvm_vgic_global_state.vcpu_base = info->vcpu.start; kvm_vgic_global_state.can_emulate_gicv2 = true; diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index ada21f47f22b..8b47507faab5 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -116,6 +116,11 @@ static long kvm_vcpu_ioctl(struct file *file, unsigned int ioctl, #ifdef CONFIG_KVM_COMPAT static long kvm_vcpu_compat_ioctl(struct file *file, unsigned int ioctl, unsigned long arg); +#define KVM_COMPAT(c) .compat_ioctl = (c) +#else +static long kvm_no_compat_ioctl(struct file *file, unsigned int ioctl, + unsigned long arg) { return -EINVAL; } +#define KVM_COMPAT(c) .compat_ioctl = kvm_no_compat_ioctl #endif static int hardware_enable_all(void); static void hardware_disable_all(void); @@ -2396,11 +2401,9 @@ static int kvm_vcpu_release(struct inode *inode, struct file *filp) static struct file_operations kvm_vcpu_fops = { .release = kvm_vcpu_release, .unlocked_ioctl = kvm_vcpu_ioctl, -#ifdef CONFIG_KVM_COMPAT - .compat_ioctl = kvm_vcpu_compat_ioctl, -#endif .mmap = kvm_vcpu_mmap, .llseek = noop_llseek, + KVM_COMPAT(kvm_vcpu_compat_ioctl), }; /* @@ -2824,10 +2827,8 @@ static int kvm_device_release(struct inode *inode, struct file *filp) static const struct file_operations kvm_device_fops = { .unlocked_ioctl = kvm_device_ioctl, -#ifdef CONFIG_KVM_COMPAT - .compat_ioctl = kvm_device_ioctl, -#endif .release = kvm_device_release, + KVM_COMPAT(kvm_device_ioctl), }; struct kvm_device *kvm_device_from_filp(struct file *filp) @@ -3165,10 +3166,8 @@ static long kvm_vm_compat_ioctl(struct file *filp, static struct file_operations kvm_vm_fops = { .release = kvm_vm_release, .unlocked_ioctl = kvm_vm_ioctl, -#ifdef CONFIG_KVM_COMPAT - .compat_ioctl = kvm_vm_compat_ioctl, -#endif .llseek = noop_llseek, + KVM_COMPAT(kvm_vm_compat_ioctl), }; static int kvm_dev_ioctl_create_vm(unsigned long type) @@ -3259,8 +3258,8 @@ out: static struct file_operations kvm_chardev_ops = { .unlocked_ioctl = kvm_dev_ioctl, - .compat_ioctl = kvm_dev_ioctl, .llseek = noop_llseek, + KVM_COMPAT(kvm_dev_ioctl), }; static struct miscdevice kvm_dev = { |