diff options
| -rw-r--r-- | drivers/net/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/net/Makefile | 2 | ||||
| -rw-r--r-- | drivers/net/ll_temac.h | 374 | ||||
| -rw-r--r-- | drivers/net/ll_temac_main.c | 969 | ||||
| -rw-r--r-- | drivers/net/ll_temac_mdio.c | 120 |
5 files changed, 1473 insertions, 0 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 214a92d1ef75..3320e7761576 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2362,6 +2362,14 @@ config MV643XX_ETH Some boards that use the Discovery chipset are the Momenco Ocelot C and Jaguar ATX and Pegasos II. +config XILINX_LL_TEMAC + tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver" + select PHYLIB + depends on PPC_DCR_NATIVE + help + This driver supports the Xilinx 10/100/1000 LocalLink TEMAC + core used in Xilinx Spartan and Virtex FPGAs + config QLA3XXX tristate "QLogic QLA3XXX Network Driver Support" depends on PCI diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 1fc4602a6ff2..80420f6d0795 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -134,6 +134,8 @@ obj-$(CONFIG_AX88796) += ax88796.o obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o +ll_temac-objs := ll_temac_main.o ll_temac_mdio.o +obj-$(CONFIG_XILINX_LL_TEMAC) += ll_temac.o obj-$(CONFIG_QLA3XXX) += qla3xxx.o obj-$(CONFIG_QLGE) += qlge/ diff --git a/drivers/net/ll_temac.h b/drivers/net/ll_temac.h new file mode 100644 index 000000000000..1af66a1e6911 --- /dev/null +++ b/drivers/net/ll_temac.h @@ -0,0 +1,374 @@ + +#ifndef XILINX_LL_TEMAC_H +#define XILINX_LL_TEMAC_H + +#include <linux/netdevice.h> +#include <linux/of.h> +#include <linux/spinlock.h> +#include <asm/dcr.h> +#include <asm/dcr-regs.h> + +/* packet size info */ +#define XTE_HDR_SIZE 14 /* size of Ethernet header */ +#define XTE_TRL_SIZE 4 /* size of Ethernet trailer (FCS) */ +#define XTE_JUMBO_MTU 9000 +#define XTE_MAX_JUMBO_FRAME_SIZE (XTE_JUMBO_MTU + XTE_HDR_SIZE + XTE_TRL_SIZE) + +/* Configuration options */ + +/* Accept all incoming packets. + * This option defaults to disabled (cleared) */ +#define XTE_OPTION_PROMISC (1 << 0) +/* Jumbo frame support for Tx & Rx. + * This option defaults to disabled (cleared) */ +#define XTE_OPTION_JUMBO (1 << 1) +/* VLAN Rx & Tx frame support. + * This option defaults to disabled (cleared) */ +#define XTE_OPTION_VLAN (1 << 2) +/* Enable recognition of flow control frames on Rx + * This option defaults to enabled (set) */ +#define XTE_OPTION_FLOW_CONTROL (1 << 4) +/* Strip FCS and PAD from incoming frames. + * Note: PAD from VLAN frames is not stripped. + * This option defaults to disabled (set) */ +#define XTE_OPTION_FCS_STRIP (1 << 5) +/* Generate FCS field and add PAD automatically for outgoing frames. + * This option defaults to enabled (set) */ +#define XTE_OPTION_FCS_INSERT (1 << 6) +/* Enable Length/Type error checking for incoming frames. When this option is +set, the MAC will filter frames that have a mismatched type/length field +and if XTE_OPTION_REPORT_RXERR is set, the user is notified when these +types of frames are encountered. When this option is cleared, the MAC will +allow these types of frames to be received. +This option defaults to enabled (set) */ +#define XTE_OPTION_LENTYPE_ERR (1 << 7) +/* Enable the transmitter. + * This option defaults to enabled (set) */ +#define XTE_OPTION_TXEN (1 << 11) +/* Enable the receiver +* This option defaults to enabled (set) */ +#define XTE_OPTION_RXEN (1 << 12) + +/* Default options set when device is initialized or reset */ +#define XTE_OPTION_DEFAULTS \ + (XTE_OPTION_TXEN | \ + XTE_OPTION_FLOW_CONTROL | \ + XTE_OPTION_RXEN) + +/* XPS_LL_TEMAC SDMA registers definition */ + +#define TX_NXTDESC_PTR 0x00 /* r */ +#define TX_CURBUF_ADDR 0x01 /* r */ +#define TX_CURBUF_LENGTH 0x02 /* r */ +#define TX_CURDESC_PTR 0x03 /* rw */ +#define TX_TAILDESC_PTR 0x04 /* rw */ +#define TX_CHNL_CTRL 0x05 /* rw */ +/* + 0:7 24:31 IRQTimeout + 8:15 16:23 IRQCount + 16:20 11:15 Reserved + 21 10 0 + 22 9 UseIntOnEnd + 23 8 LdIRQCnt + 24 7 IRQEn + 25:28 3:6 Reserved + 29 2 IrqErrEn + 30 1 IrqDlyEn + 31 0 IrqCoalEn +*/ +#define CHNL_CTRL_IRQ_IOE (1 << 9) +#define CHNL_CTRL_IRQ_EN (1 << 7) +#define CHNL_CTRL_IRQ_ERR_EN (1 << 2) +#define CHNL_CTRL_IRQ_DLY_EN (1 << 1) +#define CHNL_CTRL_IRQ_COAL_EN (1 << 0) +#define TX_IRQ_REG 0x06 /* rw */ +/* + 0:7 24:31 DltTmrValue + 8:15 16:23 ClscCntrValue + 16:17 14:15 Reserved + 18:21 10:13 ClscCnt + 22:23 8:9 DlyCnt + 24:28 3::7 Reserved + 29 2 ErrIrq + 30 1 DlyIrq + 31 0 CoalIrq + */ +#define TX_CHNL_STS 0x07 /* r */ +/* + 0:9 22:31 Reserved + 10 21 TailPErr + 11 20 CmpErr + 12 19 AddrErr + 13 18 NxtPErr + 14 17 CurPErr + 15 16 BsyWr + 16:23 8:15 Reserved + 24 7 Error + 25 6 IOE + 26 5 SOE + 27 4 Cmplt + 28 3 SOP + 29 2 EOP + 30 1 EngBusy + 31 0 Reserved +*/ + +#define RX_NXTDESC_PTR 0x08 /* r */ +#define RX_CURBUF_ADDR 0x09 /* r */ +#define RX_CURBUF_LENGTH 0x0a /* r */ +#define RX_CURDESC_PTR 0x0b /* rw */ +#define RX_TAILDESC_PTR 0x0c /* rw */ +#define RX_CHNL_CTRL 0x0d /* rw */ +/* + 0:7 24:31 IRQTimeout + 8:15 16:23 IRQCount + 16:20 11:15 Reserved + 21 10 0 + 22 9 UseIntOnEnd + 23 8 LdIRQCnt + 24 7 IRQEn + 25:28 3:6 Reserved + 29 2 IrqErrEn + 30 1 IrqDlyEn + 31 0 IrqCoalEn + */ +#define RX_IRQ_REG 0x0e /* rw */ +#define IRQ_COAL (1 << 0) +#define IRQ_DLY (1 << 1) +#define IRQ_ERR (1 << 2) +#define IRQ_DMAERR (1 << 7) /* this is not documented ??? */ +/* + 0:7 24:31 DltTmrValue + 8:15 16:23 ClscCntrValue + 16:17 14:15 Reserved + 18:21 10:13 ClscCnt + 22:23 8:9 DlyCnt + 24:28 3::7 Reserved +*/ +#define RX_CHNL_STS 0x0f /* r */ +#define CHNL_STS_ENGBUSY (1 << 1) +#define CHNL_STS_EOP (1 << 2) +#define CHNL_STS_SOP (1 << 3) +#define CHNL_STS_CMPLT (1 << 4) +#define CHNL_STS_SOE (1 << 5) +#define CHNL_STS_IOE (1 << 6) +#define CHNL_STS_ERR (1 << 7) + +#define CHNL_STS_BSYWR (1 << 16) +#define CHNL_STS_CURPERR (1 << 17) +#define CHNL_STS_NXTPERR (1 << 18) +#define CHNL_STS_ADDRERR (1 << 19) +#define CHNL_STS_CMPERR (1 << 20) +#define CHNL_STS_TAILERR (1 << 21) +/* + 0:9 22:31 Reserved + 10 21 TailPErr + 11 20 CmpErr + 12 19 AddrErr + 13 18 NxtPErr + 14 17 CurPErr + 15 16 BsyWr + 16:23 8:15 Reserved + 24 7 Error + 25 6 IOE + 26 5 SOE + 27 4 Cmplt + 28 3 SOP + 29 2 EOP + 30 1 EngBusy + 31 0 Reserved +*/ + +#define DMA_CONTROL_REG 0x10 /* rw */ +#define DMA_CONTROL_RST (1 << 0) +#define DMA_TAIL_ENABLE (1 << 2) + +/* XPS_LL_TEMAC direct registers definition */ + +#define XTE_RAF0_OFFSET 0x00 +#define RAF0_RST (1 << 0) +#define RAF0_MCSTREJ (1 << 1) +#define RAF0_BCSTREJ (1 << 2) +#define XTE_TPF0_OFFSET 0x04 +#define XTE_IFGP0_OFFSET 0x08 +#define XTE_ISR0_OFFSET 0x0c +#define ISR0_HARDACSCMPLT (1 << 0) +#define ISR0_AUTONEG (1 << 1) +#define ISR0_RXCMPLT (1 << 2) +#define ISR0_RXREJ (1 << 3) +#define ISR0_RXFIFOOVR (1 << 4) +#define ISR0_TXCMPLT (1 << 5) +#define ISR0_RXDCMLCK (1 << 6) + +#define XTE_IPR0_OFFSET 0x10 +#define XTE_IER0_OFFSET 0x14 + +#define XTE_MSW0_OFFSET 0x20 +#define XTE_LSW0_OFFSET 0x24 +#define XTE_CTL0_OFFSET 0x28 +#define XTE_RDY0_OFFSET 0x2c + +#define XTE_RSE_MIIM_RR_MASK 0x0002 +#define XTE_RSE_MIIM_WR_MASK 0x0004 +#define XTE_RSE_CFG_RR_MASK 0x0020 +#define XTE_RSE_CFG_WR_MASK 0x0040 +#define XTE_RDY0_HARD_ACS_RDY_MASK (0x10000) + +/* XPS_LL_TEMAC indirect registers offset definition */ + +#define XTE_RXC0_OFFSET 0x00000200 /* Rx configuration word 0 */ +#define XTE_RXC1_OFFSET 0x00000240 /* Rx configuration word 1 */ +#define XTE_RXC1_RXRST_MASK (1 << 31) /* Receiver reset */ +#define XTE_RXC1_RXJMBO_MASK (1 << 30) /* Jumbo frame enable */ +#define XTE_RXC1_RXFCS_MASK (1 << 29) /* FCS not stripped */ +#define XTE_RXC1_RXEN_MASK (1 << 28) /* Receiver enable */ +#define XTE_RXC1_RXVLAN_MASK (1 << 27) /* VLAN enable */ +#define XTE_RXC1_RXHD_MASK (1 << 26) /* Half duplex */ +#define XTE_RXC1_RXLT_MASK (1 << 25) /* Length/type check disable */ + +#define XTE_TXC_OFFSET 0x00000280 /* Tx configuration */ +#define XTE_TXC_TXRST_MASK (1 << 31) /* Transmitter reset */ +#define XTE_TXC_TXJMBO_MASK (1 << 30) /* Jumbo frame enable */ +#define XTE_TXC_TXFCS_MASK (1 << 29) /* Generate FCS */ +#define XTE_TXC_TXEN_MASK (1 << 28) /* Transmitter enable */ +#define XTE_TXC_TXVLAN_MASK (1 << 27) /* VLAN enable */ +#define XTE_TXC_TXHD_MASK (1 << 26) /* Half duplex */ + +#define XTE_FCC_OFFSET 0x000002C0 /* Flow control config */ +#define XTE_FCC_RXFLO_MASK (1 << 29) /* Rx flow control enable */ +#define XTE_FCC_TXFLO_MASK (1 << 30) /* Tx flow control enable */ + +#define XTE_EMCFG_OFFSET 0x00000300 /* EMAC configuration */ +#define XTE_EMCFG_LINKSPD_MASK 0xC0000000 /* Link speed */ +#define XTE_EMCFG_HOSTEN_MASK (1 << 26) /* Host interface enable */ +#define XTE_EMCFG_LINKSPD_10 0x00000000 /* 10 Mbit LINKSPD_MASK */ +#define XTE_EMCFG_LINKSPD_100 (1 << 30) /* 100 Mbit LINKSPD_MASK */ +#define XTE_EMCFG_LINKSPD_1000 (1 << 31) /* 1000 Mbit LINKSPD_MASK */ + +#define XTE_GMIC_OFFSET 0x00000320 /* RGMII/SGMII config */ +#define XTE_MC_OFFSET 0x00000340 /* MDIO configuration */ +#define XTE_UAW0_OFFSET 0x00000380 /* Unicast address word 0 */ +#define XTE_UAW1_OFFSET 0x00000384 /* Unicast address word 1 */ + +#define XTE_MAW0_OFFSET 0x00000388 /* Multicast addr word 0 */ +#define XTE_MAW1_OFFSET 0x0000038C /* Multicast addr word 1 */ +#define XTE_AFM_OFFSET 0x00000390 /* Promiscuous mode */ +#define XTE_AFM_EPPRM_MASK (1 << 31) /* Promiscuous mode enable */ + +/* Interrupt Request status */ +#define XTE_TIS_OFFSET 0x000003A0 +#define TIS_FRIS (1 << 0) +#define TIS_MRIS (1 << 1) +#define TIS_MWIS (1 << 2) +#define TIS_ARIS (1 << 3) +#define TIS_AWIS (1 << 4) +#define TIS_CRIS (1 << 5) +#define TIS_CWIS (1 << 6) + +#define XTE_TIE_OFFSET 0x000003A4 /* Interrupt enable */ + +/** MII Mamagement Control register (MGTCR) */ +#define XTE_MGTDR_OFFSET 0x000003B0 /* MII data */ +#define XTE_MIIMAI_OFFSET 0x000003B4 /* MII control */ + +#define CNTLREG_WRITE_ENABLE_MASK 0x8000 +#define CNTLREG_EMAC1SEL_MASK 0x0400 +#define CNTLREG_ADDRESSCODE_MASK 0x03ff + +/* CDMAC descriptor status bit definitions */ + +#define STS_CTRL_APP0_ERR (1 << 31) +#define STS_CTRL_APP0_IRQONEND (1 << 30) +/* undoccumented */ +#define STS_CTRL_APP0_STOPONEND (1 << 29) +#define STS_CTRL_APP0_CMPLT (1 << 28) +#define STS_CTRL_APP0_SOP (1 << 27) +#define STS_CTRL_APP0_EOP (1 << 26) +#define STS_CTRL_APP0_ENGBUSY (1 << 25) +/* undocumented */ +#define STS_CTRL_APP0_ENGRST (1 << 24) + +#define TX_CONTROL_CALC_CSUM_MASK 1 + +#define XTE_ALIGN 32 +#define BUFFER_ALIGN(adr) ((XTE_ALIGN - ((u32) adr)) % XTE_ALIGN) + +#define MULTICAST_CAM_TABLE_NUM 4 + +/* TX/RX CURDESC_PTR points to first descriptor */ +/* TX/RX TAILDESC_PTR points to last descriptor in linked list */ + +/** + * struct cdmac_bd - LocalLink buffer descriptor format + * + * app0 bits: + * 0 Error + * 1 IrqOnEnd generate an interrupt at completion of DMA op + * 2 reserved + * 3 completed Current descriptor completed + * 4 SOP TX - marks first desc/ RX marks first desct + * 5 EOP TX marks last desc/RX marks last desc + * 6 EngBusy DMA is processing + * 7 reserved + * 8:31 application specific + */ +struct cdmac_bd { + u32 next; /* Physical address of next buffer descriptor */ + u32 phys; + u32 len; + u32 app0; + u32 app1; /* TX start << 16 | insert */ + u32 app2; /* TX csum */ + u32 app3; + u32 app4; /* skb for TX length for RX */ +}; + +struct temac_local { + struct net_device *ndev; + struct device *dev; + + /* Connection to PHY device */ + struct phy_device *phy_dev; /* Pointer to PHY device */ + struct device_node *phy_node; + + /* MDIO bus data */ + struct mii_bus *mii_bus; /* MII bus reference */ + int mdio_irqs[PHY_MAX_ADDR]; /* IRQs table for MDIO bus */ + + /* IO registers and IRQs */ + void __iomem *regs; + dcr_host_t sdma_dcrs; + int tx_irq; + int rx_irq; + int emac_num; + + struct sk_buff **rx_skb; + spinlock_t rx_lock; + struct mutex indirect_mutex; + u32 options; /* Current options word */ + int last_link; + + /* Buffer descriptors */ + struct cdmac_bd *tx_bd_v; + dma_addr_t tx_bd_p; + struct cdmac_bd *rx_bd_v; + dma_addr_t rx_bd_p; + int tx_bd_ci; + int tx_bd_next; + int tx_bd_tail; + int rx_bd_ci; +}; + +/* xilinx_temac.c */ +u32 temac_ior(struct temac_local *lp, int offset); +void temac_iow(struct temac_local *lp, int offset, u32 value); +int temac_indirect_busywait(struct temac_local *lp); +u32 temac_indirect_in32(struct temac_local *lp, int reg); +void temac_indirect_out32(struct temac_local *lp, int reg, u32 value); + + +/* xilinx_temac_mdio.c */ +int temac_mdio_setup(struct temac_local *lp, struct device_node *np); +void temac_mdio_teardown(struct temac_local *lp); + +#endif /* XILINX_LL_TEMAC_H */ diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ll_temac_main.c new file mode 100644 index 000000000000..96e7248876c1 --- /dev/null +++ b/drivers/net/ll_temac_main.c @@ -0,0 +1,969 @@ +/* + * Driver for Xilinx TEMAC Ethernet device + * + * Copyright (c) 2008 Nissin Systems Co., Ltd., Yoshio Kashiwagi + * Copyright (c) 2005-2008 DLA Systems, David H. Lynch Jr. <dhlii@dlasys.net> + * Copyright (c) 2008-2009 Secret Lab Technologies Ltd. + * + * This is a driver for the Xilinx ll_temac ipcore which is often used + * in the Virtex and Spartan series of chips. + * + * Notes: + * - The ll_temac hardware uses indirect access for many of the TEMAC + * registers, include the MDIO bus. However, indirect access to MDIO + * registers take considerably more clock cycles than to TEMAC registers. + * MDIO accesses are long, so threads doing them should probably sleep + * rather than busywait. However, since only one indirect access can be + * in progress at any given time, that means that *all* indirect accesses + * could end up sleeping (to wait for an MDIO access to complete). + * Fortunately none of the indirect accesses are on the 'hot' path for tx + * or rx, so this should be okay. + * + * TODO: + * - Fix driver to work on more than just Virtex5. Right now the driver + * assumes that the locallink DMA registers are accessed via DCR + * instructions. + * - Factor out locallink DMA code into separate driver + * - Fix multicast assignment. + * - Fix support for hardware checksumming. + * - Testing. Lots and lots of testing. + * + */ + +#include <linux/delay.h> +#include <linux/etherdevice.h> +#include <linux/init.h> +#include <linux/mii.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/netdevice.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_mdio.h> +#include <linux/of_platform.h> +#include <linux/skbuff.h> +#include <linux/spinlock.h> +#include <linux/tcp.h> /* needed for sizeof(tcphdr) */ +#include <linux/udp.h> /* needed for sizeof(udphdr) */ +#include <linux/phy.h> +#include <linux/in.h> +#include <linux/io.h> +#include <linux/ip.h> + +#include "ll_temac.h" + +#define TX_BD_NUM 64 +#define RX_BD_NUM 128 + +/* --------------------------------------------------------------------- + * Low level register access functions + */ + +u32 temac_ior(struct temac_local *lp, int offset) +{ + return in_be32((u32 *)(lp->regs + offset)); +} + +void temac_iow(struct temac_local *lp, int offset, u32 value) +{ + out_be32((u32 *) (lp->regs + offset), value); +} + +int temac_indirect_busywait(struct temac_local *lp) +{ + long end = jiffies + 2; + + while (!(temac_ior(lp, XTE_RDY0_OFFSET) & XTE_RDY0_HARD_ACS_RDY_MASK)) { + if (end - jiffies <= 0) { + WARN_ON(1); + return -ETIMEDOUT; + } + msleep(1); + } + return 0; +} + +/** + * temac_indirect_in32 + * + * lp->indirect_mutex must be held when calling this function + */ +u32 temac_indirect_in32(struct temac_local *lp, int reg) +{ + u32 val; + + if (temac_indirect_busywait(lp)) + return -ETIMEDOUT; + temac_iow(lp, XTE_CTL0_OFFSET, reg); + if (temac_indirect_busywait(lp)) + return -ETIMEDOUT; + val = temac_ior(lp, XTE_LSW0_OFFSET); + + return val; +} + +/** + * temac_indirect_out32 + * + * lp->indirect_mutex must be held when calling this function + */ +void temac_indirect_out32(struct temac_local *lp, int reg, u32 value) +{ + if (temac_indirect_busywait(lp)) + return; + temac_iow(lp, XTE_LSW0_OFFSET, value); + temac_iow(lp, XTE_CTL0_OFFSET, CNTLREG_WRITE_ENABLE_MASK | reg); +} + +static u32 temac_dma_in32(struct temac_local *lp, int reg) +{ + return dcr_read(lp->sdma_dcrs, reg); +} + +static void temac_dma_out32(struct temac_local *lp, int reg, u32 value) +{ + dcr_write(lp->sdma_dcrs, reg, value); +} + +/** + * temac_dma_bd_init - Setup buffer descriptor rings + */ +static int temac_dma_bd_init(struct net_device *ndev) +{ + struct temac_local *lp = netdev_priv(ndev); + struct sk_buff *skb; + int i; + + lp->rx_skb = kzalloc(sizeof(struct sk_buff)*RX_BD_NUM, GFP_KERNEL); + /* allocate the tx and rx ring buffer descriptors. */ + /* returns a virtual addres and a physical address. */ + lp->tx_bd_v = dma_alloc_coherent(ndev->dev.parent, + sizeof(*lp->tx_bd_v) * TX_BD_NUM, + &lp->tx_bd_p, GFP_KERNEL); + lp->rx_bd_v = dma_alloc_coherent(ndev->dev.parent, + sizeof(*lp->rx_bd_v) * RX_BD_NUM, + &lp->rx_bd_p, GFP_KERNEL); + + memset(lp->tx_bd_v, 0, sizeof(*lp->tx_bd_v) * TX_BD_NUM); + for (i = 0; i < TX_BD_NUM; i++) { + lp->tx_bd_v[i].next = lp->tx_bd_p + + sizeof(*lp->tx_bd_v) * ((i + 1) % TX_BD_NUM); + } + + memset(lp->rx_bd_v, 0, sizeof(*lp->rx_bd_v) * RX_BD_NUM); + for (i = 0; i < RX_BD_NUM; i++) { + lp->rx_bd_v[i].next = lp->rx_bd_p + + sizeof(*lp->rx_bd_v) * ((i + 1) % RX_BD_NUM); + + skb = alloc_skb(XTE_MAX_JUMBO_FRAME_SIZE + + XTE_ALIGN, GFP_ATOMIC); + if (skb == 0) { + dev_err(&ndev->dev, "alloc_skb error %d\n", i); + return -1; + } + lp->rx_skb[i] = skb; + skb_reserve(skb, BUFFER_ALIGN(skb->data)); + /* returns physical address of skb->data */ + lp->rx_bd_v[i].phys = dma_map_single(ndev->dev.parent, + skb->data, + XTE_MAX_JUMBO_FRAME_SIZE, + DMA_FROM_DEVICE); + lp->rx_bd_v[i].len = XTE_MAX_JUMBO_FRAME_SIZE; + lp->rx_bd_v[i].app0 = STS_CTRL_APP0_IRQONEND; + } + + temac_dma_out32(lp, TX_CHNL_CTRL, 0x10220400 | + CHNL_CTRL_IRQ_EN | + CHNL_CTRL_IRQ_DLY_EN | + CHNL_CTRL_IRQ_COAL_EN); + /* 0x10220483 */ + /* 0x00100483 */ + temac_dma_out32(lp, RX_CHNL_CTRL, 0xff010000 | + CHNL_CTRL_IRQ_EN | + CHNL_CTRL_IRQ_DLY_EN | + CHNL_CTRL_IRQ_COAL_EN | + CHNL_CTRL_IRQ_IOE); + /* 0xff010283 */ + + temac_dma_out32(lp, RX_CURDESC_PTR, lp->rx_bd_p); + temac_dma_out32(lp, RX_TAILDESC_PTR, + lp->rx_bd_p + (sizeof(*lp->rx_bd_v) * (RX_BD_NUM - 1))); + temac_dma_out32(lp, TX_CURDESC_PTR, lp->tx_bd_p); + + return 0; +} + +/* --------------------------------------------------------------------- + * net_device_ops + */ + +static int temac_set_mac_address(struct net_device *ndev, void *address) +{ + struct temac_local *lp = netdev_priv(ndev); + + if (address) + memcpy(ndev->dev_addr, address, ETH_ALEN); + + if (!is_valid_ether_addr(ndev->dev_addr)) + random_ether_addr(ndev->dev_addr); + + /* set up unicast MAC address filter set its mac address */ + mutex_lock(&lp->indirect_mutex); + temac_indirect_out32(lp, XTE_UAW0_OFFSET, + (ndev->dev_addr[0]) | + (ndev->dev_addr[1] << 8) | + (ndev->dev_addr[2] << 16) | + (ndev->dev_addr[3] << 24)); + /* There are reserved bits in EUAW1 + * so don't affect them Set MAC bits [47:32] in EUAW1 */ + temac_indirect_out32(lp, XTE_UAW1_OFFSET, + (ndev->dev_addr[4] & 0x000000ff) | + (ndev->dev_addr[5] << 8)); + mutex_unlock(&lp->indirect_mutex); + + return 0; +} + +static void temac_set_multicast_list(struct net_device *ndev) +{ + struct temac_local *lp = netdev_priv(ndev); + u32 multi_addr_msw, multi_addr_lsw, val; + int i; + + mutex_lock(&lp->indirect_mutex); + if (ndev->flags & (IFF_ALLMULTI | IFF_PROMISC) + || ndev->mc_count > MULTICAST_CAM_TABLE_NUM) { + /* + * We must make the kernel realise we had to move + * into promisc mode or we start all out war on + * the cable. If it was a promisc request the + * flag is already set. If not we assert it. + */ + ndev->flags |= IFF_PROMISC; + temac_indirect_out32(lp, XTE_AFM_OFFSET, XTE_AFM_EPPRM_MASK); + dev_info(&ndev->dev, "Promiscuous mode enabled.\n"); + } else if (ndev->mc_count) { + struct dev_mc_list *mclist = ndev->mc_list; + for (i = 0; mclist && i < ndev->mc_count; i++) { + + if (i >= MULTICAST_CAM_TABLE_NUM) + break; + multi_addr_msw = ((mclist->dmi_addr[3] << 24) | + (mclist->dmi_addr[2] << 16) | + (mclist->dmi_addr[1] << 8) | + (mclist->dmi_addr[0])); + temac_indirect_out32(lp, XTE_MAW0_OFFSET, + multi_addr_msw); + multi_addr_lsw = ((mclist->dmi_addr[5] << 8) | + (mclist->dmi_addr[4]) | (i << 16)); + temac_indirect_out32(lp, XTE_MAW1_OFFSET, + multi_addr_lsw); + mclist = mclist->next; + } + } else { + val = temac_indirect_in32(lp, XTE_AFM_OFFSET); + temac_indirect_out32(lp, XTE_AFM_OFFSET, + val & ~XTE_AFM_EPPRM_MASK); + temac_indirect_out32(lp, XTE_MAW0_OFFSET, 0); + temac_indirect_out32(lp, XTE_MAW1_OFFSET, 0); + dev_info(&ndev->dev, "Promiscuous mode disabled.\n"); + } + mutex_unlock(&lp->indirect_mutex); +} + +struct temac_option { + int flg; + u32 opt; + u32 reg; + u32 m_or; + u32 m_and; +} temac_options[] = { + /* Turn on jumbo packet support for both Rx and Tx */ + { + .opt = XTE_OPTION_JUMBO, + .reg = XTE_TXC_OFFSET, + .m_or = XTE_TXC_TXJMBO_MASK, + }, + { + .opt = XTE_OPTION_JUMBO, + .reg = XTE_RXC1_OFFSET, + .m_or =XTE_RXC1_RXJMBO_MASK, + }, + /* Turn on VLAN packet support for both Rx and Tx */ + { + .opt = XTE_OPTION_VLAN, + .reg = XTE_TXC_OFFSET, + .m_or =XTE_TXC_TXVLAN_MASK, + }, + { + .opt = XTE_OPTION_VLAN, + .reg = XTE_RXC1_OFFSET, + .m_or =XTE_RXC1_RXVLAN_MASK, + }, + /* Turn on FCS stripping on receive packets */ + { + .opt = XTE_OPTION_FCS_STRIP, + .reg = XTE_RXC1_OFFSET, + .m_or =XTE_RXC1_RXFCS_MASK, + }, + /* Turn on FCS insertion on transmit packets */ + { + .opt = XTE_OPTION_FCS_INSERT, + .reg = XTE_TXC_OFFSET, + .m_or =XTE_TXC_TXFCS_MASK, + }, + /* Turn on length/type field checking on receive packets */ + { + .opt = XTE_OPTION_LENTYPE_ERR, + .reg = XTE_RXC1_OFFSET, + .m_or =XTE_RXC1_RXLT_MASK, + }, + /* Turn on flow control */ + { + .opt = XTE_OPTION_FLOW_CONTROL, + .reg = XTE_FCC_OFFSET, + .m_or =XTE_FCC_RXFLO_MASK, + }, + /* Turn on flow control */ + { + .opt = XTE_OPTION_FLOW_CONTROL, + .reg = XTE_FCC_OFFSET, + .m_or =XTE_FCC_TXFLO_MASK, + }, + /* Turn on promiscuous frame filtering (all frames are received ) */ + { + .opt = XTE_OPTION_PROMISC, + .reg = XTE_AFM_OFFSET, + .m_or =XTE_AFM_EPPRM_MASK, + }, + /* Enable transmitter if not already enabled */ + { + .opt = XTE_OPTION_TXEN, + .reg = XTE_TXC_OFFSET, + .m_or =XTE_TXC_TXEN_MASK, + }, + /* Enable receiver? */ + { + .opt = XTE_OPTION_RXEN, + .reg = XTE_RXC1_OFFSET, + .m_or =XTE_RXC1_RXEN_MASK, + }, + {} +}; + +/** + * temac_setoptions + */ +static u32 temac_setoptions(struct net_device *ndev, u32 options) +{ + struct temac_local *lp = netdev_priv(ndev); + struct temac_option *tp = &temac_options[0]; + int reg; + + mutex_lock(&lp->indirect_mutex); + while (tp->opt) { + reg = temac_indirect_in32(lp, tp->reg) & ~tp->m_or; + if (options & tp->opt) + reg |= tp->m_or; + temac_indirect_out32(lp, tp->reg, reg); + tp++; + } + lp->options |= options; + mutex_unlock(&lp->indirect_mutex); + + return (0); +} + +/* Initilize temac */ +static void temac_device_reset(struct net_device *ndev) +{ + struct temac_local *lp = netdev_priv(ndev); + u32 timeout; + u32 val; + + /* Perform a software reset */ + + /* 0x300 host enable bit ? */ + /* reset PHY through control register ?:1 */ + + dev_dbg(&ndev->dev, "%s()\n", __func__); + + mutex_lock(&lp->indirect_mutex); + /* Reset the receiver and wait for it to finish reset */ + temac_indirect_out32(lp, XTE_RXC1_OFFSET, XTE_RXC1_RXRST_MASK); + timeout = 1000; + while (temac_indirect_in32(lp, XTE_RXC1_OFFSET) & XTE_RXC1_RXRST_MASK) { + udelay(1); + if (--timeout == 0) { + dev_err(&ndev->dev, + "temac_device_reset RX reset timeout!!\n"); + break; + } + } + + /* Reset the transmitter and wait for it to finish reset */ + temac_indirect_out32(lp, XTE_TXC_OFFSET, XTE_TXC_TXRST_MASK); + timeout = 1000; + while (temac_indirect_in32(lp, XTE_TXC_OFFSET) & XTE_TXC_TXRST_MASK) { + udelay(1); + if (--timeout == 0) { + dev_err(&ndev->dev, + "temac_device_reset TX reset timeout!!\n"); + break; + } + } + + /* Disable the receiver */ + val = temac_indirect_in32(lp, XTE_RXC1_OFFSET); + temac_indirect_out32(lp, XTE_RXC1_OFFSET, val & ~XTE_RXC1_RXEN_MASK); + + /* Reset Local Link (DMA) */ + temac_dma_out32(lp, DMA_CONTROL_REG, DMA_CONTROL_RST); + timeout = 1000; + while (temac_dma_in32(lp, DMA_CONTROL_REG) & DMA_CONTROL_RST) { + udelay(1); + if (--timeout == 0) { + dev_err(&ndev->dev, + "temac_device_reset DMA reset timeout!!\n"); + break; + } + } + temac_dma_out32(lp, DMA_CONTROL_REG, DMA_TAIL_ENABLE); + + temac_dma_bd_init(ndev); + + temac_indirect_out32(lp, XTE_RXC0_OFFSET, 0); + temac_indirect_out32(lp, XTE_RXC1_OFFSET, 0); + temac_indirect_out32(lp, XTE_TXC_OFFSET, 0); + temac_indirect_out32(lp, XTE_FCC_OFFSET, XTE_FCC_RXFLO_MASK); + + mutex_unlock(&lp->indirect_mutex); + + /* Sync default options with HW + * but leave receiver and transmitter disabled. */ + temac_setoptions(ndev, + lp->options & ~(XTE_OPTION_TXEN | XTE_OPTION_RXEN)); + + temac_set_mac_address(ndev, NULL); + + /* Set address filter table */ + temac_set_multicast_list(ndev); + if (temac_setoptions(ndev, lp->options)) + dev_err(&ndev->dev, "Error setting TEMAC options\n"); + + /* Init Driver variable */ + ndev->trans_start = 0; +} + +void temac_adjust_link(struct net_device *ndev) +{ + struct temac_local *lp = netdev_priv(ndev); + struct phy_device *phy = lp->phy_dev; + u32 mii_speed; + int link_state; + + /* hash together the state values to decide if something has changed */ + link_state = phy->speed | (phy->duplex << 1) | phy->link; + + mutex_lock(&lp->indirect_mutex); + if (lp->last_link != link_state) { + mii_speed = temac_indirect_in32(lp, XTE_EMCFG_OFFSET); + mii_speed &= ~XTE_EMCFG_LINKSPD_MASK; + + switch (phy->speed) { + case SPEED_1000: mii_speed |= XTE_EMCFG_LINKSPD_1000; break; + case SPEED_100: mii_speed |= XTE_EMCFG_LINKSPD_100; break; + case SPEED_10: mii_speed |= XTE_EMCFG_LINKSPD_10; break; + } + + /* Write new speed setting out to TEMAC */ + temac_indirect_out32(lp, XTE_EMCFG_OFFSET, mii_speed); + lp->last_link = link_state; + phy_print_status(phy); + } + mutex_unlock(&lp->indirect_mutex); +} + +static void temac_start_xmit_done(struct net_device *ndev) +{ + struct temac_local *lp = netdev_priv(ndev); + struct cdmac_bd *cur_p; + unsigned int stat = 0; + + cur_p = &lp->tx_bd_v[lp->tx_bd_ci]; + stat = cur_p->app0; + + while (stat & STS_CTRL_APP0_CMPLT) { + dma_unmap_single(ndev->dev.parent, cur_p->phys, cur_p->len, + DMA_TO_DEVICE); + if (cur_p->app4) + dev_kfree_skb_irq((struct sk_buff *)cur_p->app4); + cur_p->app0 = 0; + + ndev->stats.tx_packets++; + ndev->stats.tx_bytes += cur_p->len; + + lp->tx_bd_ci++; + if (lp->tx_bd_ci >= TX_BD_NUM) + lp->tx_bd_ci = 0; + + cur_p = &lp->tx_bd_v[lp->tx_bd_ci]; + stat = cur_p->app0; + } + + netif_wake_queue(ndev); +} + +static int temac_start_xmit(struct sk_buff *skb, struct net_device *ndev) +{ + struct temac_local *lp = netdev_priv(ndev); + struct cdmac_bd *cur_p; + dma_addr_t start_p, tail_p; + int ii; + unsigned long num_frag; + skb_frag_t *frag; + + num_frag = skb_shinfo(skb)->nr_frags; + frag = &skb_shinfo(skb)->frags[0]; + start_p = lp->tx_bd_p + sizeof(*lp->tx_bd_v) * lp->tx_bd_tail; + cur_p = &lp->tx_bd_v[lp->tx_bd_tail]; + + if (cur_p->app0 & STS_CTRL_APP0_CMPLT) { + if (!netif_queue_stopped(ndev)) { + netif_stop_queue(ndev); + return NETDEV_TX_BUSY; + } + return NETDEV_TX_BUSY; + } + + cur_p->app0 = 0; + if (skb->ip_summed == CHECKSUM_PARTIAL) { + const struct iphdr *ip = ip_hdr(skb); + int length = 0, start = 0, insert = 0; + + switch (ip->protocol) { + case IPPROTO_TCP: + start = sizeof(struct iphdr) + ETH_HLEN; + insert = sizeof(struct iphdr) + ETH_HLEN + 16; + length = ip->tot_len - sizeof(struct iphdr); + break; + case IPPROTO_UDP: + start = sizeof(struct iphdr) + ETH_HLEN; + insert = sizeof(struct iphdr) + ETH_HLEN + 6; + length = ip->tot_len - sizeof(struct iphdr); + break; + default: + break; + } + cur_p->app1 = ((start << 16) | insert); + cur_p->app2 = csum_tcpudp_magic(ip->saddr, ip->daddr, + length, ip->protocol, 0); + skb->data[insert] = 0; + skb->data[insert + 1] = 0; + } + cur_p->app0 |= STS_CTRL_APP0_SOP; + cur_p->len = skb_headlen(skb); + cur_p->phys = dma_map_single(ndev->dev.parent, skb->data, skb->len, + DMA_TO_DEVICE); + cur_p->app4 = (unsigned long)skb; + + for (ii = 0; ii < num_frag; ii++) { + lp->tx_bd_tail++; + if (lp->tx_bd_tail >= TX_BD_NUM) + lp->tx_bd_tail = 0; + + cur_p = &lp->tx_bd_v[lp->tx_bd_tail]; + cur_p->phys = dma_map_single(ndev->dev.parent, + (void *)page_address(frag->page) + + frag->page_offset, + frag->size, DMA_TO_DEVICE); + cur_p->len = frag->size; + cur_p->app0 = 0; + frag++; + } + cur_p->app0 |= STS_CTRL_APP0_EOP; + + tail_p = lp->tx_bd_p + sizeof(*lp->tx_bd_v) * lp->tx_bd_tail; + lp->tx_bd_tail++; + if (lp->tx_bd_tail >= TX_BD_NUM) + lp->tx_bd_tail = 0; + + /* Kick off the transfer */ + temac_dma_out32(lp, TX_TAILDESC_PTR, tail_p); /* DMA start */ + + return 0; +} + + +static void ll_temac_recv(struct net_device *ndev) +{ + struct temac_local *lp = netdev_priv(ndev); + struct sk_buff *skb, *new_skb; + unsigned int bdstat; + struct cdmac_bd *cur_p; + dma_addr_t tail_p; + int length; + unsigned long skb_vaddr; + unsigned long flags; + + spin_lock_irqsave(&lp->rx_lock, flags); + + tail_p = lp->rx_bd_p + sizeof(*lp->rx_bd_v) * lp->rx_bd_ci; + cur_p = &lp->rx_bd_v[lp->rx_bd_ci]; + + bdstat = cur_p->app0; + while ((bdstat & STS_CTRL_APP0_CMPLT)) { + + skb = lp->rx_skb[lp->rx_bd_ci]; + length = cur_p->app4; + + skb_vaddr = virt_to_bus(skb->data); + dma_unmap_single(ndev->dev.parent, skb_vaddr, length, + DMA_FROM_DEVICE); + + skb_put(skb, length); + skb->dev = ndev; + skb->protocol = eth_type_trans(skb, ndev); + skb->ip_summed = CHECKSUM_NONE; + + netif_rx(skb); + + ndev->stats.rx_packets++; + ndev->stats.rx_bytes += length; + + new_skb = alloc_skb(XTE_MAX_JUMBO_FRAME_SIZE + XTE_ALIGN, + GFP_ATOMIC); + if (new_skb == 0) { + dev_err(&ndev->dev, "no memory for new sk_buff\n"); + spin_unlock_irqrestore(&lp->rx_lock, flags); + return; + } + + skb_reserve(new_skb, BUFFER_ALIGN(new_skb->data)); + + cur_p->app0 = STS_CTRL_APP0_IRQONEND; + cur_p->phys = dma_map_single(ndev->dev.parent, new_skb->data, + XTE_MAX_JUMBO_FRAME_SIZE, + DMA_FROM_DEVICE); + cur_p->len = XTE_MAX_JUMBO_FRAME_SIZE; + lp->rx_skb[lp->rx_bd_ci] = new_skb; + + lp->rx_bd_ci++; + if (lp->rx_bd_ci >= RX_BD_NUM) + lp->rx_bd_ci = 0; + + cur_p = &lp->rx_bd_v[lp->rx_bd_ci]; + bdstat = cur_p->app0; + } + temac_dma_out32(lp, RX_TAILDESC_PTR, tail_p); + + spin_unlock_irqrestore(&lp->rx_lock, flags); +} + +static irqreturn_t ll_temac_tx_irq(int irq, void *_ndev) +{ + struct net_device *ndev = _ndev; + struct temac_local *lp = netdev_priv(ndev); + unsigned int status; + + status = temac_dma_in32(lp, TX_IRQ_REG); + temac_dma_out32(lp, TX_IRQ_REG, status); + + if (status & (IRQ_COAL | IRQ_DLY)) + temac_start_xmit_done(lp->ndev); + if (status & 0x080) + dev_err(&ndev->dev, "DMA error 0x%x\n", status); + + return IRQ_HANDLED; +} + +static irqreturn_t ll_temac_rx_irq(int irq, void *_ndev) +{ + struct net_device *ndev = _ndev; + struct temac_local *lp = netdev_priv(ndev); + unsigned int status; + + /* Read and clear the status registers */ + status = temac_dma_in32(lp, RX_IRQ_REG); + temac_dma_out32(lp, RX_IRQ_REG, status); + + if (status & (IRQ_COAL | IRQ_DLY)) + ll_temac_recv(lp->ndev); + + return IRQ_HANDLED; +} + +static int temac_open(struct net_device *ndev) +{ + struct temac_local *lp = netdev_priv(ndev); + int rc; + + dev_dbg(&ndev->dev, "temac_open()\n"); + + if (lp->phy_node) { + lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node, + temac_adjust_link, 0, 0); + if (!lp->phy_dev) { + dev_err(lp->dev, "of_phy_connect() failed\n"); + return -ENODEV; + } + + phy_start(lp->phy_dev); + } + + rc = request_irq(lp->tx_irq, ll_temac_tx_irq, 0, ndev->name, ndev); + if (rc) + goto err_tx_irq; + rc = request_irq(lp->rx_irq, ll_temac_rx_irq, 0, ndev->name, ndev); + if (rc) + goto err_rx_irq; + + temac_device_reset(ndev); + return 0; + + err_rx_irq: + free_irq(lp->tx_irq, ndev); + err_tx_irq: + if (lp->phy_dev) + phy_disconnect(lp->phy_dev); + lp->phy_dev = NULL; + dev_err(lp->dev, "request_irq() failed\n"); + return rc; +} + +static int temac_stop(struct net_device *ndev) +{ + struct temac_local *lp = netdev_priv(ndev); + + dev_dbg(&ndev->dev, "temac_close()\n"); + + free_irq(lp->tx_irq, ndev); + free_irq(lp->rx_irq, ndev); + + if (lp->phy_dev) + phy_disconnect(lp->phy_dev); + lp->phy_dev = NULL; + + return 0; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void +temac_poll_controller(struct net_device *ndev) +{ + struct temac_local *lp = netdev_priv(ndev); + + disable_irq(lp->tx_irq); + disable_irq(lp->rx_irq); + + ll_temac_rx_irq(lp->tx_irq, lp); + ll_temac_tx_irq(lp->rx_irq, lp); + + enable_irq(lp->tx_irq); + enable_irq(lp->rx_irq); +} +#endif + +static const struct net_device_ops temac_netdev_ops = { + .ndo_open = temac_open, + .ndo_stop = temac_stop, + .ndo_start_xmit = temac_start_xmit, + .ndo_set_mac_address = temac_set_mac_address, + //.ndo_set_multicast_list = temac_set_multicast_list, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = temac_poll_controller, +#endif +}; + +/* --------------------------------------------------------------------- + * SYSFS device attributes + */ +static ssize_t temac_show_llink_regs(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct net_device *ndev = dev_get_drvdata(dev); + struct temac_local *lp = netdev_priv(ndev); + int i, len = 0; + + for (i = 0; i < 0x11; i++) + len += sprintf(buf + len, "%.8x%s", temac_dma_in32(lp, i), + (i % 8) == 7 ? "\n" : " "); + len += sprintf(buf + len, "\n"); + + return len; +} + +static DEVICE_ATTR(llink_regs, 0440, temac_show_llink_regs, NULL); + +static struct attribute *temac_device_attrs[] = { + &dev_attr_llink_regs.attr, + NULL, +}; + +static const struct attribute_group temac_attr_group = { + .attrs = temac_device_attrs, +}; + +static int __init +temac_of_probe(struct of_device *op, const struct of_device_id *match) +{ + struct device_node *np; + struct temac_local *lp; + struct net_device *ndev; + const void *addr; + int size, rc = 0; + unsigned int dcrs; + + /* Init network device structure */ + ndev = alloc_etherdev(sizeof(*lp)); + if (!ndev) { + dev_err(&op->dev, "could not allocate device.\n"); + return -ENOMEM; + } + ether_setup(ndev); + dev_set_drvdata(&op->dev, ndev); + SET_NETDEV_DEV(ndev, &op->dev); + ndev->flags &= ~IFF_MULTICAST; /* clear multicast */ + ndev->features = NETIF_F_SG | NETIF_F_FRAGLIST; + ndev->netdev_ops = &temac_netdev_ops; +#if 0 + ndev->features |= NETIF_F_IP_CSUM; /* Can checksum TCP/UDP over IPv4. */ + ndev->features |= NETIF_F_HW_CSUM; /* Can checksum all the packets. */ + ndev->features |= NETIF_F_IPV6_CSUM; /* Can checksum IPV6 TCP/UDP */ + ndev->features |= NETIF_F_HIGHDMA; /* Can DMA to high memory. */ + ndev->features |= NETIF_F_HW_VLAN_TX; /* Transmit VLAN hw accel */ + ndev->features |= NETIF_F_HW_VLAN_RX; /* Receive VLAN hw acceleration */ + ndev->features |= NETIF_F_HW_VLAN_FILTER; /* Receive VLAN filtering */ + ndev->features |= NETIF_F_VLAN_CHALLENGED; /* cannot handle VLAN pkts */ + ndev->features |= NETIF_F_GSO; /* Enable software GSO. */ + ndev->features |= NETIF_F_MULTI_QUEUE; /* Has multiple TX/RX queues */ + ndev->features |= NETIF_F_LRO; /* large receive offload */ +#endif + + /* setup temac private info structure */ + lp = netdev_priv(ndev); + lp->ndev = ndev; + lp->dev = &op->dev; + lp->options = XTE_OPTION_DEFAULTS; + spin_lock_init(&lp->rx_lock); + mutex_init(&lp->indirect_mutex); + + /* map device registers */ + lp->regs = of_iomap(op->node, 0); + if (!lp->regs) { + dev_err(&op->dev, "could not map temac regs.\n"); + goto nodev; + } + + /* Find the DMA node, map the DMA registers, and decode the DMA IRQs */ + np = of_parse_phandle(op->node, "llink-connected", 0); + if (!np) { + dev_err(&op->dev, "could not find DMA node\n"); + goto nodev; + } + + dcrs = dcr_resource_start(np, 0); + if (dcrs == 0) { + dev_err(&op->dev, "could not get DMA register address\n"); + goto nodev;; + } + lp->sdma_dcrs = dcr_map(np, dcrs, dcr_resource_len(np, 0)); + dev_dbg(&op->dev, "DCR base: %x\n", dcrs); + + lp->rx_irq = irq_of_parse_and_map(np, 0); + lp->tx_irq = irq_of_parse_and_map(np, 1); + if (!lp->rx_irq || !lp->tx_irq) { + dev_err(&op->dev, "could not determine irqs\n"); + rc = -ENOMEM; + goto nodev; + } + + of_node_put(np); /* Finished with the DMA node; drop the reference */ + + /* Retrieve the MAC address */ + addr = of_get_property(op->node, "local-mac-address", &size); + if ((!addr) || (size != 6)) { + dev_err(&op->dev, "could not find MAC address\n"); + rc = -ENODEV; + goto nodev; + } + temac_set_mac_address(ndev, (void *)addr); + + rc = temac_mdio_setup(lp, op->node); + if (rc) + dev_warn(&op->dev, "error registering MDIO bus\n"); + + lp->phy_node = of_parse_phandle(op->node, "phy-handle", 0); + if (lp->phy_node) + dev_dbg(lp->dev, "using PHY node %s (%p)\n", np->full_name, np); + + /* Add the device attributes */ + rc = sysfs_create_group(&lp->dev->kobj, &temac_attr_group); + if (rc) { + dev_err(lp->dev, "Error creating sysfs files\n"); + goto nodev; + } + + rc = register_netdev(lp->ndev); + if (rc) { + dev_err(lp->dev, "register_netdev() error (%i)\n", rc); + goto err_register_ndev; + } + + return 0; + + err_register_ndev: + sysfs_remove_group(&lp->dev->kobj, &temac_attr_group); + nodev: + free_netdev(ndev); + ndev = NULL; + return rc; +} + +static int __devexit temac_of_remove(struct of_device *op) +{ + struct net_device *ndev = dev_get_drvdata(&op->dev); + struct temac_local *lp = netdev_priv(ndev); + + temac_mdio_teardown(lp); + unregister_netdev(ndev); + sysfs_remove_group(&lp->dev->kobj, &temac_attr_group); + if (lp->phy_node) + of_node_put(lp->phy_node); + lp->phy_node = NULL; + dev_set_drvdata(&op->dev, NULL); + free_netdev(ndev); + return 0; +} + +static struct of_device_id temac_of_match[] __devinitdata = { + { .compatible = "xlnx,xps-ll-temac-1.01.b", }, + {}, +}; +MODULE_DEVICE_TABLE(of, temac_of_match); + +static struct of_platform_driver temac_of_driver = { + .match_table = temac_of_match, + .probe = temac_of_probe, + .remove = __devexit_p(temac_of_remove), + .driver = { + .owner = THIS_MODULE, + .name = "xilinx_temac", + }, +}; + +static int __init temac_init(void) +{ + return of_register_platform_driver(&temac_of_driver); +} +module_init(temac_init); + +static void __exit temac_exit(void) +{ + of_unregister_platform_driver(&temac_of_driver); +} +module_exit(temac_exit); + +MODULE_DESCRIPTION("Xilinx LL_TEMAC Ethernet driver"); +MODULE_AUTHOR("Yoshio Kashiwagi"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ll_temac_mdio.c b/drivers/net/ll_temac_mdio.c new file mode 100644 index 000000000000..da0e462308d5 --- /dev/null +++ b/drivers/net/ll_temac_mdio.c @@ -0,0 +1,120 @@ +/* + * MDIO bus driver for the Xilinx TEMAC device + * + * Copyright (c) 2009 Secret Lab Technologies, Ltd. + */ + +#include <linux/io.h> +#include <linux/netdevice.h> +#include <linux/mutex.h> +#include <linux/phy.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_mdio.h> + +#include "ll_temac.h" + +/* --------------------------------------------------------------------- + * MDIO Bus functions + */ +static int temac_mdio_read(struct mii_bus *bus, int phy_id, int reg) +{ + struct temac_local *lp = bus->priv; + u32 rc; + + /* Write the PHY address to the MIIM Access Initiator register. + * When the transfer completes, the PHY register value will appear + * in the LSW0 register */ + mutex_lock(&lp->indirect_mutex); + temac_iow(lp, XTE_LSW0_OFFSET, (phy_id << 5) | reg); + rc = temac_indirect_in32(lp, XTE_MIIMAI_OFFSET); + mutex_unlock(&lp->indirect_mutex); + + dev_dbg(lp->dev, "temac_mdio_read(phy_id=%i, reg=%x) == %x\n", + phy_id, reg, rc); + + return rc; +} + +static int temac_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 val) +{ + struct temac_local *lp = bus->priv; + + dev_dbg(lp->dev, "temac_mdio_write(phy_id=%i, reg=%x, val=%x)\n", + phy_id, reg, val); + + /* First write the desired value into the write data register + * and then write the address into the access initiator register + */ + mutex_lock(&lp->indirect_mutex); + temac_indirect_out32(lp, XTE_MGTDR_OFFSET, val); + temac_indirect_out32(lp, XTE_MIIMAI_OFFSET, (phy_id << 5) | reg); + mutex_unlock(&lp->indirect_mutex); + + return 0; +} + +int temac_mdio_setup(struct temac_local *lp, struct device_node *np) +{ + struct mii_bus *bus; + const u32 *bus_hz; + int clk_div; + int rc, size; + struct resource res; + + /* Calculate a reasonable divisor for the clock rate */ + clk_div = 0x3f; /* worst-case default setting */ + bus_hz = of_get_property(np, "clock-frequency", &size); + if (bus_hz && size >= sizeof(*bus_hz)) { + clk_div = (*bus_hz) / (2500 * 1000 * 2) - 1; + if (clk_div < 1) + clk_div = 1; + if (clk_div > 0x3f) + clk_div = 0x3f; + } + + /* Enable the MDIO bus by asserting the enable bit and writing + * in the clock config */ + mutex_lock(&lp->indirect_mutex); + temac_indirect_out32(lp, XTE_MC_OFFSET, 1 << 6 | clk_div); + mutex_unlock(&lp->indirect_mutex); + + bus = mdiobus_alloc(); + if (!bus) + return -ENOMEM; + + of_address_to_resource(np, 0, &res); + snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx", + (unsigned long long)res.start); + bus->priv = lp; + bus->name = "Xilinx TEMAC MDIO"; + bus->read = temac_mdio_read; + bus->write = temac_mdio_write; + bus->parent = lp->dev; + bus->irq = lp->mdio_irqs; /* preallocated IRQ table */ + + lp->mii_bus = bus; + + rc = of_mdiobus_register(bus, np); + if (rc) + goto err_register; + + mutex_lock(&lp->indirect_mutex); + dev_dbg(lp->dev, "MDIO bus registered; MC:%x\n", + temac_indirect_in32(lp, XTE_MC_OFFSET)); + mutex_unlock(&lp->indirect_mutex); + return 0; + + err_register: + mdiobus_free(bus); + return rc; +} + +void temac_mdio_teardown(struct temac_local *lp) +{ + mdiobus_unregister(lp->mii_bus); + kfree(lp->mii_bus->irq); + mdiobus_free(lp->mii_bus); + lp->mii_bus = NULL; +} + |