diff options
| -rw-r--r-- | Documentation/input/alps.txt | 68 | ||||
| -rw-r--r-- | drivers/input/mouse/alps.c | 39 |
2 files changed, 66 insertions, 41 deletions
diff --git a/Documentation/input/alps.txt b/Documentation/input/alps.txt index 90bca6f988e1..a63e5e013a8c 100644 --- a/Documentation/input/alps.txt +++ b/Documentation/input/alps.txt @@ -3,8 +3,8 @@ ALPS Touchpad Protocol Introduction ------------ -Currently the ALPS touchpad driver supports five protocol versions in use by -ALPS touchpads, called versions 1, 2, 3, 4 and 5. +Currently the ALPS touchpad driver supports seven protocol versions in use by +ALPS touchpads, called versions 1, 2, 3, 4, 5, 6 and 7. Since roughly mid-2010 several new ALPS touchpads have been released and integrated into a variety of laptops and netbooks. These new touchpads @@ -240,3 +240,67 @@ For mt, the format is: byte 3: 0 x23 x22 x21 x20 x19 x18 x17 byte 4: 0 x9 x8 x7 x6 x5 x4 x3 byte 5: 0 x16 x15 x14 x13 x12 x11 x10 + +ALPS Absolute Mode - Protocol Version 6 +--------------------------------------- + +For trackstick packet, the format is: + + byte 0: 1 1 1 1 1 1 1 1 + byte 1: 0 X6 X5 X4 X3 X2 X1 X0 + byte 2: 0 Y6 Y5 Y4 Y3 Y2 Y1 Y0 + byte 3: ? Y7 X7 ? ? M R L + byte 4: Z7 Z6 Z5 Z4 Z3 Z2 Z1 Z0 + byte 5: 0 1 1 1 1 1 1 1 + +For touchpad packet, the format is: + + byte 0: 1 1 1 1 1 1 1 1 + byte 1: 0 0 0 0 x3 x2 x1 x0 + byte 2: 0 0 0 0 y3 y2 y1 y0 + byte 3: ? x7 x6 x5 x4 ? r l + byte 4: ? y7 y6 y5 y4 ? ? ? + byte 5: z7 z6 z5 z4 z3 z2 z1 z0 + +(v6 touchpad does not have middle button) + +ALPS Absolute Mode - Protocol Version 7 +--------------------------------------- + +For trackstick packet, the format is: + + byte 0: 0 1 0 0 1 0 0 0 + byte 1: 1 1 * * 1 M R L + byte 2: X7 1 X5 X4 X3 X2 X1 X0 + byte 3: Z6 1 Y6 X6 1 Y2 Y1 Y0 + byte 4: Y7 0 Y5 Y4 Y3 1 1 0 + byte 5: T&P 0 Z5 Z4 Z3 Z2 Z1 Z0 + +For touchpad packet, the format is: + + packet-fmt b7 b6 b5 b4 b3 b2 b1 b0 + byte 0: TWO & MULTI L 1 R M 1 Y0-2 Y0-1 Y0-0 + byte 0: NEW L 1 X1-5 1 1 Y0-2 Y0-1 Y0-0 + byte 1: Y0-10 Y0-9 Y0-8 Y0-7 Y0-6 Y0-5 Y0-4 Y0-3 + byte 2: X0-11 1 X0-10 X0-9 X0-8 X0-7 X0-6 X0-5 + byte 3: X1-11 1 X0-4 X0-3 1 X0-2 X0-1 X0-0 + byte 4: TWO X1-10 TWO X1-9 X1-8 X1-7 X1-6 X1-5 X1-4 + byte 4: MULTI X1-10 TWO X1-9 X1-8 X1-7 X1-6 Y1-5 1 + byte 4: NEW X1-10 TWO X1-9 X1-8 X1-7 X1-6 0 0 + byte 5: TWO & NEW Y1-10 0 Y1-9 Y1-8 Y1-7 Y1-6 Y1-5 Y1-4 + byte 5: MULTI Y1-10 0 Y1-9 Y1-8 Y1-7 Y1-6 F-1 F-0 + + L: Left button + R / M: Non-clickpads: Right / Middle button + Clickpads: When > 2 fingers are down, and some fingers + are in the button area, then the 2 coordinates reported + are for fingers outside the button area and these report + extra fingers being present in the right / left button + area. Note these fingers are not added to the F field! + so if a TWO packet is received and R = 1 then there are + 3 fingers down, etc. + TWO: 1: Two touches present, byte 0/4/5 are in TWO fmt + 0: If byte 4 bit 0 is 1, then byte 0/4/5 are in MULTI fmt + otherwise byte 0 bit 4 must be set and byte 0/4/5 are + in NEW fmt + F: Number of fingers - 3, 0 means 3 fingers, 1 means 4 ... diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index b4144ad0987b..d28726a0ef85 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -909,34 +909,6 @@ static void alps_get_finger_coordinate_v7(struct input_mt_pos *mt, unsigned char *pkt, unsigned char pkt_id) { - /* - * packet-fmt b7 b6 b5 b4 b3 b2 b1 b0 - * Byte0 TWO & MULTI L 1 R M 1 Y0-2 Y0-1 Y0-0 - * Byte0 NEW L 1 X1-5 1 1 Y0-2 Y0-1 Y0-0 - * Byte1 Y0-10 Y0-9 Y0-8 Y0-7 Y0-6 Y0-5 Y0-4 Y0-3 - * Byte2 X0-11 1 X0-10 X0-9 X0-8 X0-7 X0-6 X0-5 - * Byte3 X1-11 1 X0-4 X0-3 1 X0-2 X0-1 X0-0 - * Byte4 TWO X1-10 TWO X1-9 X1-8 X1-7 X1-6 X1-5 X1-4 - * Byte4 MULTI X1-10 TWO X1-9 X1-8 X1-7 X1-6 Y1-5 1 - * Byte4 NEW X1-10 TWO X1-9 X1-8 X1-7 X1-6 0 0 - * Byte5 TWO & NEW Y1-10 0 Y1-9 Y1-8 Y1-7 Y1-6 Y1-5 Y1-4 - * Byte5 MULTI Y1-10 0 Y1-9 Y1-8 Y1-7 Y1-6 F-1 F-0 - * L: Left button - * R / M: Non-clickpads: Right / Middle button - * Clickpads: When > 2 fingers are down, and some fingers - * are in the button area, then the 2 coordinates reported - * are for fingers outside the button area and these report - * extra fingers being present in the right / left button - * area. Note these fingers are not added to the F field! - * so if a TWO packet is received and R = 1 then there are - * 3 fingers down, etc. - * TWO: 1: Two touches present, byte 0/4/5 are in TWO fmt - * 0: If byte 4 bit 0 is 1, then byte 0/4/5 are in MULTI fmt - * otherwise byte 0 bit 4 must be set and byte 0/4/5 are - * in NEW fmt - * F: Number of fingers - 3, 0 means 3 fingers, 1 means 4 ... - */ - mt[0].x = ((pkt[2] & 0x80) << 4); mt[0].x |= ((pkt[2] & 0x3F) << 5); mt[0].x |= ((pkt[3] & 0x30) >> 1); @@ -1061,17 +1033,6 @@ static void alps_process_trackstick_packet_v7(struct psmouse *psmouse) return; } - /* - * b7 b6 b5 b4 b3 b2 b1 b0 - * Byte0 0 1 0 0 1 0 0 0 - * Byte1 1 1 * * 1 M R L - * Byte2 X7 1 X5 X4 X3 X2 X1 X0 - * Byte3 Z6 1 Y6 X6 1 Y2 Y1 Y0 - * Byte4 Y7 0 Y5 Y4 Y3 1 1 0 - * Byte5 T&P 0 Z5 Z4 Z3 Z2 Z1 Z0 - * M / R / L: Middle / Right / Left button - */ - x = ((packet[2] & 0xbf)) | ((packet[3] & 0x10) << 2); y = (packet[3] & 0x07) | (packet[4] & 0xb8) | ((packet[3] & 0x20) << 1); |