diff options
34 files changed, 56 insertions, 64 deletions
diff --git a/Documentation/networking/phy.txt b/Documentation/networking/phy.txt index 95e5f5985a2a..d5b1a3935245 100644 --- a/Documentation/networking/phy.txt +++ b/Documentation/networking/phy.txt @@ -103,7 +103,7 @@ Letting the PHY Abstraction Layer do Everything Now, to connect, just call this function: - phydev = phy_connect(dev, phy_name, &adjust_link, flags, interface); + phydev = phy_connect(dev, phy_name, &adjust_link, interface); phydev is a pointer to the phy_device structure which represents the PHY. If phy_connect is successful, it will return the pointer. dev, here, is the @@ -113,7 +113,9 @@ Letting the PHY Abstraction Layer do Everything current state, though the PHY will not yet be truly operational at this point. - flags is a u32 which can optionally contain phy-specific flags. + PHY-specific flags should be set in phydev->dev_flags prior to the call + to phy_connect() such that the underlying PHY driver can check for flags + and perform specific operations based on them. This is useful if the system has put hardware restrictions on the PHY/controller, of which the PHY needs to be aware. @@ -185,11 +187,10 @@ Doing it all yourself start, or disables then frees them for stop. struct phy_device * phy_attach(struct net_device *dev, const char *phy_id, - u32 flags, phy_interface_t interface); + phy_interface_t interface); Attaches a network device to a particular PHY, binding the PHY to a generic - driver if none was found during bus initialization. Passes in - any phy-specific flags as needed. + driver if none was found during bus initialization. int phy_start_aneg(struct phy_device *phydev); diff --git a/drivers/net/ethernet/8390/ax88796.c b/drivers/net/ethernet/8390/ax88796.c index 7eeddf01307f..cab306a9888e 100644 --- a/drivers/net/ethernet/8390/ax88796.c +++ b/drivers/net/ethernet/8390/ax88796.c @@ -358,7 +358,7 @@ static int ax_mii_probe(struct net_device *dev) return -ENODEV; } - ret = phy_connect_direct(dev, phy_dev, ax_handle_link_change, 0, + ret = phy_connect_direct(dev, phy_dev, ax_handle_link_change, PHY_INTERFACE_MODE_MII); if (ret) { netdev_err(dev, "Could not attach to PHY\n"); diff --git a/drivers/net/ethernet/adi/bfin_mac.c b/drivers/net/ethernet/adi/bfin_mac.c index c7a83f6f2382..a175d0be1ae1 100644 --- a/drivers/net/ethernet/adi/bfin_mac.c +++ b/drivers/net/ethernet/adi/bfin_mac.c @@ -425,8 +425,8 @@ static int mii_probe(struct net_device *dev, int phy_mode) return -EINVAL; } - phydev = phy_connect(dev, dev_name(&phydev->dev), &bfin_mac_adjust_link, - 0, phy_mode); + phydev = phy_connect(dev, dev_name(&phydev->dev), + &bfin_mac_adjust_link, phy_mode); if (IS_ERR(phydev)) { netdev_err(dev, "could not attach PHY\n"); diff --git a/drivers/net/ethernet/aeroflex/greth.c b/drivers/net/ethernet/aeroflex/greth.c index 480662ba5227..0be2195e5034 100644 --- a/drivers/net/ethernet/aeroflex/greth.c +++ b/drivers/net/ethernet/aeroflex/greth.c @@ -1288,9 +1288,7 @@ static int greth_mdio_probe(struct net_device *dev) } ret = phy_connect_direct(dev, phy, &greth_link_change, - 0, greth->gbit_mac ? - PHY_INTERFACE_MODE_GMII : - PHY_INTERFACE_MODE_MII); + greth->gbit_mac ? PHY_INTERFACE_MODE_GMII : PHY_INTERFACE_MODE_MII); if (ret) { if (netif_msg_ifup(greth)) dev_err(&dev->dev, "could not attach to PHY\n"); diff --git a/drivers/net/ethernet/amd/au1000_eth.c b/drivers/net/ethernet/amd/au1000_eth.c index 65b865a0cc78..de774d419144 100644 --- a/drivers/net/ethernet/amd/au1000_eth.c +++ b/drivers/net/ethernet/amd/au1000_eth.c @@ -437,8 +437,8 @@ static int au1000_mii_probe(struct net_device *dev) /* now we are supposed to have a proper phydev, to attach to... */ BUG_ON(phydev->attached_dev); - phydev = phy_connect(dev, dev_name(&phydev->dev), &au1000_adjust_link, - 0, PHY_INTERFACE_MODE_MII); + phydev = phy_connect(dev, dev_name(&phydev->dev), + &au1000_adjust_link, PHY_INTERFACE_MODE_MII); if (IS_ERR(phydev)) { netdev_err(dev, "Could not attach to PHY\n"); diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.c b/drivers/net/ethernet/broadcom/bcm63xx_enet.c index d8a151046728..f5b6b4715d45 100644 --- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c +++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c @@ -799,7 +799,7 @@ static int bcm_enet_open(struct net_device *dev) snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, priv->mii_bus->id, priv->phy_id); - phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link, 0, + phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link, PHY_INTERFACE_MODE_MII); if (IS_ERR(phydev)) { diff --git a/drivers/net/ethernet/broadcom/sb1250-mac.c b/drivers/net/ethernet/broadcom/sb1250-mac.c index 3a1c8a3cf7c9..e9b35da375cb 100644 --- a/drivers/net/ethernet/broadcom/sb1250-mac.c +++ b/drivers/net/ethernet/broadcom/sb1250-mac.c @@ -2385,7 +2385,7 @@ static int sbmac_mii_probe(struct net_device *dev) return -ENXIO; } - phy_dev = phy_connect(dev, dev_name(&phy_dev->dev), &sbmac_mii_poll, 0, + phy_dev = phy_connect(dev, dev_name(&phy_dev->dev), &sbmac_mii_poll, PHY_INTERFACE_MODE_GMII); if (IS_ERR(phy_dev)) { printk(KERN_ERR "%s: could not attach to PHY\n", dev->name); diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 88f2d41c009b..227749107789 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -2004,8 +2004,8 @@ static int tg3_phy_init(struct tg3 *tp) phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]; /* Attach the MAC to the PHY. */ - phydev = phy_connect(tp->dev, dev_name(&phydev->dev), tg3_adjust_link, - phydev->dev_flags, phydev->interface); + phydev = phy_connect(tp->dev, dev_name(&phydev->dev), + tg3_adjust_link, phydev->interface); if (IS_ERR(phydev)) { dev_err(&tp->pdev->dev, "Could not attach to PHY\n"); return PTR_ERR(phydev); diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c index a9b0830fb39d..352190b9ebe7 100644 --- a/drivers/net/ethernet/cadence/macb.c +++ b/drivers/net/ethernet/cadence/macb.c @@ -287,7 +287,7 @@ static int macb_mii_probe(struct net_device *dev) } /* attach the mac to the phy */ - ret = phy_connect_direct(dev, phydev, &macb_handle_link_change, 0, + ret = phy_connect_direct(dev, phydev, &macb_handle_link_change, bp->phy_interface); if (ret) { netdev_err(dev, "Could not attach to PHY\n"); diff --git a/drivers/net/ethernet/dnet.c b/drivers/net/ethernet/dnet.c index 2c177b329c8b..f3d60eb13c3a 100644 --- a/drivers/net/ethernet/dnet.c +++ b/drivers/net/ethernet/dnet.c @@ -281,11 +281,11 @@ static int dnet_mii_probe(struct net_device *dev) /* attach the mac to the phy */ if (bp->capabilities & DNET_HAS_RMII) { phydev = phy_connect(dev, dev_name(&phydev->dev), - &dnet_handle_link_change, 0, + &dnet_handle_link_change, PHY_INTERFACE_MODE_RMII); } else { phydev = phy_connect(dev, dev_name(&phydev->dev), - &dnet_handle_link_change, 0, + &dnet_handle_link_change, PHY_INTERFACE_MODE_MII); } diff --git a/drivers/net/ethernet/ethoc.c b/drivers/net/ethernet/ethoc.c index b51c81ac0b6f..aa47ef9689a8 100644 --- a/drivers/net/ethernet/ethoc.c +++ b/drivers/net/ethernet/ethoc.c @@ -682,8 +682,8 @@ static int ethoc_mdio_probe(struct net_device *dev) return -ENXIO; } - err = phy_connect_direct(dev, phy, ethoc_mdio_poll, 0, - PHY_INTERFACE_MODE_GMII); + err = phy_connect_direct(dev, phy, ethoc_mdio_poll, + PHY_INTERFACE_MODE_GMII); if (err) { dev_err(&dev->dev, "could not attach to PHY\n"); return err; diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c index 96454b5fca63..7c361d1db94c 100644 --- a/drivers/net/ethernet/faraday/ftgmac100.c +++ b/drivers/net/ethernet/faraday/ftgmac100.c @@ -858,8 +858,7 @@ static int ftgmac100_mii_probe(struct ftgmac100 *priv) } phydev = phy_connect(netdev, dev_name(&phydev->dev), - &ftgmac100_adjust_link, 0, - PHY_INTERFACE_MODE_GMII); + &ftgmac100_adjust_link, PHY_INTERFACE_MODE_GMII); if (IS_ERR(phydev)) { netdev_err(netdev, "%s: Could not attach to PHY\n", netdev->name); diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c index 5f2b4acf4836..1b7684a8851e 100644 --- a/drivers/net/ethernet/freescale/fec.c +++ b/drivers/net/ethernet/freescale/fec.c @@ -1008,7 +1008,7 @@ static int fec_enet_mii_probe(struct net_device *ndev) } snprintf(phy_name, sizeof(phy_name), PHY_ID_FMT, mdio_bus_id, phy_id); - phy_dev = phy_connect(ndev, phy_name, &fec_enet_adjust_link, 0, + phy_dev = phy_connect(ndev, phy_name, &fec_enet_adjust_link, fep->phy_interface); if (IS_ERR(phy_dev)) { printk(KERN_ERR "%s: could not attach to PHY\n", ndev->name); diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c index 8ead46adc21e..6a2127489af7 100644 --- a/drivers/net/ethernet/lantiq_etop.c +++ b/drivers/net/ethernet/lantiq_etop.c @@ -393,8 +393,8 @@ ltq_etop_mdio_probe(struct net_device *dev) return -ENODEV; } - phydev = phy_connect(dev, dev_name(&phydev->dev), <q_etop_mdio_link, - 0, priv->pldata->mii_mode); + phydev = phy_connect(dev, dev_name(&phydev->dev), + <q_etop_mdio_link, priv->pldata->mii_mode); if (IS_ERR(phydev)) { netdev_err(dev, "Could not attach to PHY\n"); diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c index 84c13263c514..c27b23d8f4fc 100644 --- a/drivers/net/ethernet/marvell/mv643xx_eth.c +++ b/drivers/net/ethernet/marvell/mv643xx_eth.c @@ -2789,7 +2789,7 @@ static void phy_init(struct mv643xx_eth_private *mp, int speed, int duplex) phy_reset(mp); - phy_attach(mp->dev, dev_name(&phy->dev), 0, PHY_INTERFACE_MODE_GMII); + phy_attach(mp->dev, dev_name(&phy->dev), PHY_INTERFACE_MODE_GMII); if (speed == 0) { phy->autoneg = AUTONEG_ENABLE; diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c index c7f2fa60fe6f..037ed866c22f 100644 --- a/drivers/net/ethernet/marvell/pxa168_eth.c +++ b/drivers/net/ethernet/marvell/pxa168_eth.c @@ -1390,7 +1390,7 @@ static void phy_init(struct pxa168_eth_private *pep, int speed, int duplex) struct phy_device *phy = pep->phy; ethernet_phy_reset(pep); - phy_attach(pep->dev, dev_name(&phy->dev), 0, PHY_INTERFACE_MODE_MII); + phy_attach(pep->dev, dev_name(&phy->dev), PHY_INTERFACE_MODE_MII); if (speed == 0) { phy->autoneg = AUTONEG_ENABLE; diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c index 6fda51ebcc76..c4122c86f829 100644 --- a/drivers/net/ethernet/nxp/lpc_eth.c +++ b/drivers/net/ethernet/nxp/lpc_eth.c @@ -800,7 +800,7 @@ static int lpc_mii_probe(struct net_device *ndev) else netdev_info(ndev, "using RMII interface\n"); phydev = phy_connect(ndev, dev_name(&phydev->dev), - &lpc_handle_link_change, 0, + &lpc_handle_link_change, lpc_phy_interface_mode(&pldat->pdev->dev)); if (IS_ERR(phydev)) { diff --git a/drivers/net/ethernet/rdc/r6040.c b/drivers/net/ethernet/rdc/r6040.c index be3616d060d9..34f76e99dc8a 100644 --- a/drivers/net/ethernet/rdc/r6040.c +++ b/drivers/net/ethernet/rdc/r6040.c @@ -1042,7 +1042,7 @@ static int r6040_mii_probe(struct net_device *dev) } phydev = phy_connect(dev, dev_name(&phydev->dev), &r6040_adjust_link, - 0, PHY_INTERFACE_MODE_MII); + PHY_INTERFACE_MODE_MII); if (IS_ERR(phydev)) { dev_err(&lp->pdev->dev, "could not attach to PHY\n"); diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 3d705862bd7d..e195c1e89d61 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -1422,7 +1422,7 @@ static int sh_eth_phy_init(struct net_device *ndev) /* Try connect to PHY */ phydev = phy_connect(ndev, phy_id, sh_eth_adjust_link, - 0, mdp->phy_interface); + mdp->phy_interface); if (IS_ERR(phydev)) { dev_err(&ndev->dev, "phy_connect failed\n"); return PTR_ERR(phydev); diff --git a/drivers/net/ethernet/s6gmac.c b/drivers/net/ethernet/s6gmac.c index 72fc57dd084d..21683e2b1ff4 100644 --- a/drivers/net/ethernet/s6gmac.c +++ b/drivers/net/ethernet/s6gmac.c @@ -795,7 +795,7 @@ static inline int s6gmac_phy_start(struct net_device *dev) struct phy_device *p = NULL; while ((i < PHY_MAX_ADDR) && (!(p = pd->mii.bus->phy_map[i]))) i++; - p = phy_connect(dev, dev_name(&p->dev), &s6gmac_adjust_link, 0, + p = phy_connect(dev, dev_name(&p->dev), &s6gmac_adjust_link, PHY_INTERFACE_MODE_RGMII); if (IS_ERR(p)) { printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index 04ff63cb6544..da5cc9a3b34c 100644 --- a/drivers/net/ethernet/smsc/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c @@ -997,9 +997,8 @@ static int smsc911x_mii_probe(struct net_device *dev) SMSC_TRACE(pdata, probe, "PHY: addr %d, phy_id 0x%08X", phydev->addr, phydev->phy_id); - ret = phy_connect_direct(dev, phydev, - &smsc911x_phy_adjust_link, 0, - pdata->config.phy_interface); + ret = phy_connect_direct(dev, phydev, &smsc911x_phy_adjust_link, + pdata->config.phy_interface); if (ret) { netdev_err(dev, "Could not attach to PHY\n"); diff --git a/drivers/net/ethernet/smsc/smsc9420.c b/drivers/net/ethernet/smsc/smsc9420.c index 3c586585e1b3..ecfb43614d7b 100644 --- a/drivers/net/ethernet/smsc/smsc9420.c +++ b/drivers/net/ethernet/smsc/smsc9420.c @@ -1179,7 +1179,7 @@ static int smsc9420_mii_probe(struct net_device *dev) phydev->phy_id); phydev = phy_connect(dev, dev_name(&phydev->dev), - smsc9420_phy_adjust_link, 0, PHY_INTERFACE_MODE_MII); + smsc9420_phy_adjust_link, PHY_INTERFACE_MODE_MII); if (IS_ERR(phydev)) { pr_err("%s: Could not attach to PHY\n", dev->name); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index f07c0612abf6..8c657294ce56 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -428,8 +428,7 @@ static int stmmac_init_phy(struct net_device *dev) priv->plat->phy_addr); pr_debug("stmmac_init_phy: trying to attach to %s\n", phy_id_fmt); - phydev = phy_connect(dev, phy_id_fmt, &stmmac_adjust_link, 0, - interface); + phydev = phy_connect(dev, phy_id_fmt, &stmmac_adjust_link, interface); if (IS_ERR(phydev)) { pr_err("%s: Could not attach to PHY\n", dev->name); diff --git a/drivers/net/ethernet/ti/cpmac.c b/drivers/net/ethernet/ti/cpmac.c index 70d1920cac97..31bbbca341a7 100644 --- a/drivers/net/ethernet/ti/cpmac.c +++ b/drivers/net/ethernet/ti/cpmac.c @@ -1172,8 +1172,8 @@ static int cpmac_probe(struct platform_device *pdev) snprintf(priv->phy_name, MII_BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id); - priv->phy = phy_connect(dev, priv->phy_name, cpmac_adjust_link, 0, - PHY_INTERFACE_MODE_MII); + priv->phy = phy_connect(dev, priv->phy_name, cpmac_adjust_link, + PHY_INTERFACE_MODE_MII); if (IS_ERR(priv->phy)) { if (netif_msg_drv(priv)) diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index bea736b8c3ec..3772804fb697 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -592,7 +592,7 @@ static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv) 1 << slave_port, 0, ALE_MCAST_FWD_2); slave->phy = phy_connect(priv->ndev, slave->data->phy_id, - &cpsw_adjust_link, 0, slave->data->phy_if); + &cpsw_adjust_link, slave->data->phy_if); if (IS_ERR(slave->phy)) { dev_err(priv->dev, "phy %s not found on slave %d\n", slave->data->phy_id, slave->slave_num); diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c index 6621ae3a98d9..8478d98c1092 100644 --- a/drivers/net/ethernet/ti/davinci_emac.c +++ b/drivers/net/ethernet/ti/davinci_emac.c @@ -1599,7 +1599,7 @@ static int emac_dev_open(struct net_device *ndev) if (priv->phy_id && *priv->phy_id) { priv->phydev = phy_connect(ndev, priv->phy_id, - &emac_adjust_link, 0, + &emac_adjust_link, PHY_INTERFACE_MODE_MII); if (IS_ERR(priv->phydev)) { diff --git a/drivers/net/ethernet/toshiba/tc35815.c b/drivers/net/ethernet/toshiba/tc35815.c index f16410e599f4..fe256094db35 100644 --- a/drivers/net/ethernet/toshiba/tc35815.c +++ b/drivers/net/ethernet/toshiba/tc35815.c @@ -633,9 +633,8 @@ static int tc_mii_probe(struct net_device *dev) /* attach the mac to the phy */ phydev = phy_connect(dev, dev_name(&phydev->dev), - &tc_handle_link_change, 0, - lp->chiptype == TC35815_TX4939 ? - PHY_INTERFACE_MODE_RMII : PHY_INTERFACE_MODE_MII); + &tc_handle_link_change, + lp->chiptype == TC35815_TX4939 ? PHY_INTERFACE_MODE_RMII : PHY_INTERFACE_MODE_MII); if (IS_ERR(phydev)) { printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); return PTR_ERR(phydev); diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c index a4be1ad886c5..6958a5e87703 100644 --- a/drivers/net/ethernet/xscale/ixp4xx_eth.c +++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c @@ -1451,7 +1451,7 @@ static int eth_init_one(struct platform_device *pdev) snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, mdio_bus->id, plat->phy); - port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link, 0, + port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link, PHY_INTERFACE_MODE_MII); if (IS_ERR(port->phydev)) { err = PTR_ERR(port->phydev); diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 8af46e88a181..9930f9999561 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -416,16 +416,15 @@ static void phy_prepare_link(struct phy_device *phydev, * @dev: the network device to connect * @phydev: the pointer to the phy device * @handler: callback function for state change notifications - * @flags: PHY device's dev_flags * @interface: PHY device's interface */ int phy_connect_direct(struct net_device *dev, struct phy_device *phydev, - void (*handler)(struct net_device *), u32 flags, + void (*handler)(struct net_device *), phy_interface_t interface) { int rc; - rc = phy_attach_direct(dev, phydev, flags, interface); + rc = phy_attach_direct(dev, phydev, phydev->dev_flags, interface); if (rc) return rc; @@ -443,7 +442,6 @@ EXPORT_SYMBOL(phy_connect_direct); * @dev: the network device to connect * @bus_id: the id string of the PHY device to connect * @handler: callback function for state change notifications - * @flags: PHY device's dev_flags * @interface: PHY device's interface * * Description: Convenience function for connecting ethernet @@ -455,7 +453,7 @@ EXPORT_SYMBOL(phy_connect_direct); * the desired functionality. */ struct phy_device * phy_connect(struct net_device *dev, const char *bus_id, - void (*handler)(struct net_device *), u32 flags, + void (*handler)(struct net_device *), phy_interface_t interface) { struct phy_device *phydev; @@ -471,7 +469,7 @@ struct phy_device * phy_connect(struct net_device *dev, const char *bus_id, } phydev = to_phy_device(d); - rc = phy_connect_direct(dev, phydev, handler, flags, interface); + rc = phy_connect_direct(dev, phydev, handler, interface); if (rc) return ERR_PTR(rc); @@ -576,14 +574,13 @@ static int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, * phy_attach - attach a network device to a particular PHY device * @dev: network device to attach * @bus_id: Bus ID of PHY device to attach - * @flags: PHY device's dev_flags * @interface: PHY device's interface * * Description: Same as phy_attach_direct() except that a PHY bus_id * string is passed instead of a pointer to a struct phy_device. */ struct phy_device *phy_attach(struct net_device *dev, - const char *bus_id, u32 flags, phy_interface_t interface) + const char *bus_id, phy_interface_t interface) { struct bus_type *bus = &mdio_bus_type; struct phy_device *phydev; @@ -599,7 +596,7 @@ struct phy_device *phy_attach(struct net_device *dev, } phydev = to_phy_device(d); - rc = phy_attach_direct(dev, phydev, flags, interface); + rc = phy_attach_direct(dev, phydev, phydev->dev_flags, interface); if (rc) return ERR_PTR(rc); diff --git a/drivers/net/usb/ax88172a.c b/drivers/net/usb/ax88172a.c index c8e0aa85fb8e..fdbab72926bd 100644 --- a/drivers/net/usb/ax88172a.c +++ b/drivers/net/usb/ax88172a.c @@ -377,7 +377,7 @@ static int ax88172a_reset(struct usbnet *dev) priv->phydev = phy_connect(dev->net, priv->phy_name, &ax88172a_adjust_link, - 0, PHY_INTERFACE_MODE_MII); + PHY_INTERFACE_MODE_MII); if (IS_ERR(priv->phydev)) { netdev_err(dev->net, "Could not connect to PHY device %s\n", priv->phy_name); diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c index 83ca06f4312b..e3a8b22ef9dd 100644 --- a/drivers/of/of_mdio.c +++ b/drivers/of/of_mdio.c @@ -157,7 +157,7 @@ struct phy_device *of_phy_connect(struct net_device *dev, if (!phy) return NULL; - return phy_connect_direct(dev, phy, hndlr, flags, iface) ? NULL : phy; + return phy_connect_direct(dev, phy, hndlr, iface) ? NULL : phy; } EXPORT_SYMBOL(of_phy_connect); @@ -194,7 +194,7 @@ struct phy_device *of_phy_connect_fixed_link(struct net_device *dev, sprintf(bus_id, PHY_ID_FMT, "fixed-0", be32_to_cpu(phy_id[0])); - phy = phy_connect(dev, bus_id, hndlr, 0, iface); + phy = phy_connect(dev, bus_id, hndlr, iface); return IS_ERR(phy) ? NULL : phy; } EXPORT_SYMBOL(of_phy_connect_fixed_link); diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c index f15059ca3781..a0a30b3f2dcd 100644 --- a/drivers/staging/et131x/et131x.c +++ b/drivers/staging/et131x/et131x.c @@ -3917,7 +3917,7 @@ static int et131x_mii_probe(struct net_device *netdev) } phydev = phy_connect(netdev, dev_name(&phydev->dev), - &et131x_adjust_link, 0, PHY_INTERFACE_MODE_MII); + &et131x_adjust_link, PHY_INTERFACE_MODE_MII); if (IS_ERR(phydev)) { dev_err(&adapter->pdev->dev, "Could not attach to PHY\n"); diff --git a/include/linux/phy.h b/include/linux/phy.h index 93b3cf77f564..33999adbf8c8 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -506,13 +506,13 @@ struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45); int phy_device_register(struct phy_device *phy); int phy_init_hw(struct phy_device *phydev); struct phy_device * phy_attach(struct net_device *dev, - const char *bus_id, u32 flags, phy_interface_t interface); + const char *bus_id, phy_interface_t interface); struct phy_device *phy_find_first(struct mii_bus *bus); int phy_connect_direct(struct net_device *dev, struct phy_device *phydev, - void (*handler)(struct net_device *), u32 flags, + void (*handler)(struct net_device *), phy_interface_t interface); struct phy_device * phy_connect(struct net_device *dev, const char *bus_id, - void (*handler)(struct net_device *), u32 flags, + void (*handler)(struct net_device *), phy_interface_t interface); void phy_disconnect(struct phy_device *phydev); void phy_detach(struct phy_device *phydev); diff --git a/net/dsa/slave.c b/net/dsa/slave.c index f795b0ca7ee6..f4345582a6b9 100644 --- a/net/dsa/slave.c +++ b/net/dsa/slave.c @@ -391,7 +391,7 @@ dsa_slave_create(struct dsa_switch *ds, struct device *parent, if (p->phy != NULL) { phy_attach(slave_dev, dev_name(&p->phy->dev), - 0, PHY_INTERFACE_MODE_GMII); + PHY_INTERFACE_MODE_GMII); p->phy->autoneg = AUTONEG_ENABLE; p->phy->speed = 0; |